We were doing sed -i /filter/p, which printed everything but printed the
filtered things twice (though they'd only get tested once). Now that the
filter works, run all the UBO tests instead of doing a 1/5 run, revealing
a new failure.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5089>
These fields (TILE_ALL and MIN_LAYERSZ) seem to be the same on a5xx as
a6xx, having looked at some UBWC vs non-UBWC texturator cases. Setting
MIN_LAYERSZ does fix the 3D fail we see in the CTS.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5127>
Now that we don't get scheduled to any 19mhz CPUs, the old GLES3 job went
from 12 minutes of deqp-runner runtime to 54s. Increase how much of the
testsuite we cover in exchange, still keeping the runtime at 3-6 min
(compared to previous 10-17 min). Since the tests we're running changed,
reset the xfails list.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5115>
Rather than heuristically guessing what PIPE formats correspond to what
in the hardware, hardcode a table. This is more verbose, but a lot more
obvious -- the previous format support code was a source of endless
silent bugs.
v2: Don't report RGB233 (icecream95). Allow RGB5 for texturing
(icecream95).
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5069>
The runner is an x86 system, so running the ARM image meant doing
everything at runtime under qemu, and for the xz of the test rootfs that
was quite expensive. Also, we can rebuild x86 images much faster than we
can rebuild arm images for container development, which will help unblock
some of the other feature parity work I have to do versus the old docker
system that cheza is using.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5033>
v2: Python's nitpick (Andres)
In case of an empty list of traces, the results.yml will contain an empty
curly braces. In YAML, an associative array can also be specified by text
enclosed in curly braces ({}),
This commit also adds the corresponding test to check the behavior of
tracie when no traces are added in the traces.yml file.
Signed-off-by: Pablo Saavedra <psaavedra@igalia.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4916>
test_tracie_skips_traces_without_checksum does the logic previous to
the commit 8546d1dd78. The traces.yml includes
several traces, only the one without checksum is ignored by tracie.
As a complementary action, this change adds an new test
(test_tracie_only_traces_without_checksum) to verify the behavior for
cases where the traces.yml only contains traces without checksum.
Finally, test_tracie_skips_traces_without_checksum is renamed as
test_tracie_traces_with_and_without_checksum
Signed-off-by: Pablo Saavedra <psaavedra@igalia.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4916>
v2: Verbatim translation from the original shell script
Make the corrections visible in explicit commits (Andres)
Remove redundant code (Alexandros)
Code style nitpick (Rohan)
Reimplementation of the tracie's self-tests using a pythonic test suit
(pytest).
The new tracie/test.py module is almost a direct translation of the
tests defined in the tracie/test.sh. This new implementation of the
test provides a more common framework where define the tests.
Also allows a better introspection for the tests results and/or
resulting errors.
This patch also adds python3-pytest as dependency for the built images
and adapts the tracie-runner scripts to run the self-test using pytest.
Signed-off-by: Pablo Saavedra <psaavedra@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com> [v1]
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com> [v1]
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4916>
RESULTS_PATH and RESULTS_PATH, as variables in the module context, are
resolved one single time, only during the first module loading. If the
the Python code in execution changes the current dir at some point,
those paths are not going to be updated anymore keeping the paths
wrongly pointing to the old working dir.
This change modify the definition of those variables to use simply
relative paths.
Signed-off-by: Pablo Saavedra <psaavedra@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4916>
A3xx apparently has higher alignment requirements than later gens for
indirect const uploads. It also has fewer of them. Add compiler
parameters for both settings, and set accordingly for a3xx and a4xx+.
This fixes all the ubo test failures caused by this optimization.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5077>
This fixes a number of dEQP tests:
dEQP-GLES3.functional.fbo.blit.conversion.r8*
dEQP-GLES3.texture.specification.basic_teximage2d.r8*
and others. The reason why this enum showed up in traces for R8 is that
it was an "upgraded" texture to R8G8.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5073>
We don't want LLVM 8 packages to be pulled in from testing though (it
would make installing llvm-8-dev for cross architectures a lot more
complicated), so explicitly select buster-backports for them (they were
already implicitly installed from there before, since they're not
available in buster proper).
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4851>
We will eventually need to build our own LLVM on Windows in order to
build libclc and other bits which are required for the d3d12 build, as
well as to be able to test SPIR-V/OpenCL on llvmpipe.
Start doing this now, building into the base container, and exercise
this by building llvmpipe under Windows.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4946>
The nir_analyze_ubo_ranges pass removes all UBO block 0 loads to reverse
what nir_lower_uniforms_to_ubo() had done, and we only upload UBO pointers
to the HW for UBO block 1-N, so let's just fix up the shader state.
Fixes an off by one in const state layout setup, and some really dodgy
register addressing trying to deal with dynamic UBO indices when the UBO
pointers happen to be at the start of the constbuf.
There's no fixes tag, though this fixes a bug from September, because it
would require the num_ubos fix in nir_lower_uniforms_to_ubo.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4992>
robclark found that we needed unique IDs when multiple runners were trying
to report flakes at the same time, but it turns out due to nick limits (16
chars on freenode) we were just getting all the runners appended with
"-142" (or whatever the prefix of the pipelines are these days). And, for
the new flake reporting from baremetal, all the runners ended up being
just "google-freedreno".
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4896>
We were incorrectly taking the merge-request on non-MR pipelines (the
master build after merge) due to a missing '$'. And, for those pipelines,
it would be nice to note whether they're for master or a stable branch.
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4896>
We were failing to tell the allocator about the restriction that scalar
texture instructions (allocated as scalar regs) couldn't be allocated such
that the start of the full unwritemasked vector started before r0. There
was a patch in select_reg_callback on a6xx that tried to work around that,
but you could still end up backed into a corner you shouldn't be because
we didn't tell the RA what it needed.
Fixes compiler assertion failures on a300-a400's blit_z shader, used for
Z32F gmem blits.
Looks like as a result we get tighter register allocation but more nops:
instructions in affected programs: 757945 -> 760356 (0.32%)
nops in affected programs: 317983 -> 320468 (0.78%)
non-nops in affected programs: 27525 -> 27451 (-0.27%)
mov in affected programs: 3098 -> 3023 (-2.42%)
dwords in affected programs: 109664 -> 110656 (0.90%)
last-baryf in affected programs: 112701 -> 112847 (0.13%)
full in affected programs: 4326 -> 4011 (-7.28%)
sstall in affected programs: 120550 -> 120836 (0.24%)
(ss) in affected programs: 13939 -> 13918 (-0.15%)
(sy) in affected programs: 3006 -> 2786 (-7.32%)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4562>
