Issue: Encoding parameters not updated after changing FrameRate
Root Cause:
In rvce_begin_frame, need_rate_control was enabled if the target_bitrate,
quant_i_frames, quant_p_frames, quant_b_frames or rate_ctrl_method
changes. Due to this the rate_control() was not updating the encoder
parameters with new framerate, peak_bits_per_picture_integer and
avg_target_bits_per_picture
Fix:
Added the condition where we will check if there is a change in
other parameters and enable need_rate_control. Eventually updating the
encoder parameters with new framerate and bitrate.
Signed-off-by: Krunal Patel <krunalkumarmukeshkumar.patel@amd.corp-partner.google.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7696>
(cherry picked from commit 35613c752f)
Icelake's sampler message header introduces a field in m0.3 bit 0
which controls whether the sampler state pointer should be relative
to bindless sampler state base address or dynamic state base address.
g0.3 bit 0 is part of the per-thread scratch space field. On older
hardware, we were able to copy that along because the sampler ignored
bits 4:0. Now, however, we need to mask them out.
Fixes various textureGatherOffsets piglit tests when forcing the FS
to run with 2048 bytes of per-thread scratch space (which is a
per-thread scratch space encoding of 1, meaning bit 0 will be set).
Cc: mesa-stable
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6735>
(cherry picked from commit 31290f9806)
The code did not return error when VK_IMAGE_CREATE_DISJOINT_BIT was
incompatible with the other input params.
If the Vulkan spec forbids a set of input params for vkCreateImage,
but permits them for vkGetPhysicalDeviceImageFormatProperties2,
then vkGetPhysicalDeviceImageFormatProperties2 must reject those input
params with failure.
- v2: Clearer commit message.
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> (v2)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 51a19c83b0)
It's supposed to be ralloced -- there's not even a shader variant destroy
function for freeing, just ralloc_free() on the ir3_shader_variant or the
parent ir3_shader when you're done!
Fixes: f97acb4bb4 ("freedreno/ir3: disk-cache support")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5810>
(cherry picked from commit 433841d9eb)
All other functions calling _eglLookupImage hold the display lock.
==16659== Possible data race during write of size 8 at 0x5D1BCF0 by thread #2668
==16659== Locks held: 1, at address 0x5D1B6F8
==16659== at 0x5405DDF: _eglLinkResource (egldisplay.c:454)
==16659== by 0x53F9189: _eglLinkImage (eglimage.h:138)
==16659== by 0x53FE2CA: _eglCreateImageCommon (eglapi.c:1740)
==16659== by 0x53FE39A: eglCreateImageKHR (eglapi.c:1751)
==16659==
==16659== This conflicts with a previous read of size 8 by thread #2664
==16659== Locks held: 1, at address 0x5308D00
==16659== at 0x5405C06: _eglCheckResource (egldisplay.c:387)
==16659== by 0x5408C92: _eglLookupImage (eglimage.h:162)
==16659== by 0x5409E96: dri2_lookup_egl_image (egl_dri2.c:688)
==16659== by 0x6210AAF: dri2_lookup_egl_image (dri_helpers.c:250)
==16659== by 0x6212843: dri_get_egl_image (dri_screen.c:470)
==16659== by 0x625F7CC: st_get_egl_image (st_cb_eglimage.c:152)
==16659== by 0x625FE7D: st_egl_image_target_texture_2d (st_cb_eglimage.c:354)
==16659== by 0x6501C05: egl_image_target_texture (teximage.c:3446)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7544>
(cherry picked from commit 959c2d1edb)
OpenGL 3.0 spec, section 4.2.3 "Clearing the Buffers":
depth and stencil are the values to clear the depth and stencil
buffers to, respectively. Clamping and type conversion for
fixed-point depth buffers are performed in the same fashion as for
ClearDepth.
Enables iris to pass the clearbuffer-depth-stencil piglit test.
Cc: mesa-stable
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7410>
(cherry picked from commit 2e713313a2)
OpenGL 3.0 spec, section 4.2.3 "Clearing the Buffers":
If buffer is DEPTH, drawbuffer must be zero, and value points to the
single depth value to clear the depth buffer to. Clamping and type
conversion for fixed-point depth buffers are performed in the same
fashion as for ClearDepth.
Enables iris to pass the clearbuffer-depth piglit test.
v2. Add spec citation. (Eric Anholt)
v3. Don't clamp floating point formats. (Eric Anholt)
Cc: mesa-stable
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7410>
(cherry picked from commit 1bf539b3a2)
This implementation was broken and should have just been the same as the
hash_table_clear() one, which I copied over here. It was setting all
formerly-present entries to deleted, yet also setting deleted_entries to
0. This meant that all new searches or additions after clearing would
have to reprobe the whole table until a rehash happened, and that rehash
would be delayed because we violated the deleted_entries invariant.
No statistically significant performance difference on softpipe
KHR-GL33.texture_swizzle.functional runtime (n=18)
Fixes: 5c075b0855 ("util/set: add a set_clear function")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7244>
(cherry picked from commit 2afdd94f86)
In bison's commit 72c9fa4510eb (skeletons: use "end of file" instead of
"$end") in bison-3.6, '$end' was changed to 'end of file' in error
messages. Since our glcpp test cases contain the expected output text,
they rely on the particular messages printed by bison. The test case
084-unbalanced-parentheses fails when Mesa is built with bison-3.6 due
to this change.
To allow the test to pass on all supported versions of bison, we:
1. Change '$end' -> 'end of file' in the .expected file, and
2. Normalize the error generated by the test case with the same
replacement
Cc: mesa-stable
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/3181
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7659>
(cherry picked from commit df29d0a111)
We forgot to initialize the sample_count member here, leading to it
being undefined. This causes problems on MSVC when compiling in
debug-mode, where we get a run-time error for using an undefined
variable.
To avoid similar problems in the future if more fields are added,
let's initialize the whole struct to zero to start with. This also
allows us to remove a no-longer-needed zero-initialization.
Fixes: cf170616da ("gallium: Add a util_blitter path for using a custom VS and FS.")
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7503>
(cherry picked from commit 441feda0bb)
In split_var_list_structs where we initalize the splitting, we already
use get_complex_used_vars to avoid splitting any variables that have a
complex use. However, we weren't actually handling the complex uses
properly in the case where we can't actually find the variable.
Fixes: f1cb3348f1 "nir/split_vars: Properly bail in the presence of ..."
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6332>
(cherry picked from commit 5664713d7b)
evergreen_emit_atomic_buffer_setup_count is only called if chip >= EVERGREEN
otherwise atomic_used_mask is left uninitialized when unconditionally used by
r600_need_cs_space so it might want more space than needed
fix this by always initializing atomic_used_mask
Fixes: 32529e6084 ("r600/eg: rework atomic counter emission with flushes")
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7417>
(cherry picked from commit 7ae81d65a4)
Like with other getters, invalid enum is dealt in find_value by setting
error to GL_INVALID_ENUM and returning INVALID_TYPE which makes
get_value_size return 0.
Fixes false 'implementation errors' seen with Piglit test:
ext_external_objects-memory-object-api-errors
"Mesa 20.3.0-devel implementation error: invalid value type in GetUnsignedBytei_vEXT()
Please report at https://gitlab.freedesktop.org/mesa/mesa/-/issues"
v2: add assert to get_value_size() (Lionel)
Fixes: e064d66020 ("mesa: implement glGetUnsignedByte{v|i_v}")
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Eleni Maria Stea <estea@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7403>
(cherry picked from commit 29fc115d58)
Something may go wrong during import which leaves pointer to null and
when ctx and it's shared state gets destroyed we will attempt to call
memobj_destroy. Instead of forcing every driver to handle it, add check
here.
Fixes crashes with Piglit test:
ext_external_objects_fd-memory-object-api-errors
Fixes: 99cf910834 ("mesa/st: Actually free the driver part of memory objects on destruction.")
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Eleni Maria Stea <estea@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7403>
(cherry picked from commit e02e1ccbee)
