We're interested in a Vulkan-only stack in Chrome OS, where Android's GLES
would be provided by ANGLE-over-Venus-over-ANV. Let's get some testing
covering ANGLE-on-ANV first.
This is structured as a single partial job pre-merge to catch most
regressions, and a longer manual job to do full coverage for when you need
to update the xfails list.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20163>
The results.csv file can get ridiculously big for a vkcts run (up to
135MB). Given how seldomly this file is being used, and the fact that
it cannot be viewed directly in gitlab's artifact page anyway.
Let's compress the file using zstd, and enjoy a ~95% reduction in size
at the cost of probably less than 1 second of compression time on even
the slowest of the devices in CI (which would use sharing), and about
150ms on the CI machines in the Valve farm.
Suggested-by: Daniel Stone <daniels@collabora.com>
Acked-by: David Heidelberg <david.heidelberg@collabora.com>
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20669>
The test suite is full of flakes around transform feedback, atomics, and
tess. But, I hope it can be useful for regression testing core Mesa
reworks.
This required updating the kernel to 5.16.12 to get a more stable boot
process. That kernel rebuild caused an update of the container with
piglit which that was missed in a previous MR, so we got new xfails in x86
swrast.
Acked-by: Ilia Mirkin <imirkin@alum.mit.edu> (nouveau)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15201>
This is prettier in the log files, less shell code, and for non-suite mode
adds checking that the driver has the right git sha1. Also, no need for
suites to have a DEQP_VER to say which dEQP we should run for the renderer
check.
The version checks can help us make sure that GL version exposed doesn't
accidentally regress, and the ".*git" checks that we're using a git
version of Mesa rather than something that snuck in through distro
packages.
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13372>
Now that we've disabled brilinear and have per-pixel cube derivatives, we
can use the same rendering paths that end users will see.
In a few cases, we switch to the no_quad_lod option instead, because
otherwise we get a piglit failure.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12125>
They're too slow to run in CI even on non-tiled renderers, they don't
block conformance (unless you crash), and provide unreliable warning
results unless you isolate them from other activity on the system.
This means that the following jobs now skip these tests:
- deqp-iris-*
- deqp-llvmpipe (you know, the one mentioned in the comment!)
- deqp-virgl-gl
- deqp-zink-lvp
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11333>
hang-detection is a vulkan-based lightweight wrapper from
parallel-deqp-runner that periodically submits empty command buffers
and waits for their completions. If the completion never happens, the
GPU is considered hung, the wrapped script is killed, and the job
should get aborted.
This should have no negative impact on the runtime of dEQP/traces/...,
but will allow saving time when the GPU gets hung as we can abort the
job immediately rather than waiting for the timeout.
In the case of B2C, we are using this tool's error message as a way to
trigger the reboot of the test machine and start again.
v2:
- Use hang-detection already with some jobs (Martin).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Martin Peres <martin.peres@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11087>
This will be used to test llvmpipe against Xvfb and freedreno against
Xorg. We keep the core deqp testing on surfaceless because
--deqp-surface-type=pbuffer fails on x11_egl_glx, =fbo has never worked in
VK-GL-CTS, and =window would increase test runtime for all the
swapbuffers.
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10240>
When loading Vulkan ICD file, it uses the CPU machine identifier to
load the correct one, in case multiple versions are installed.
This is fine if the machine where Mesa has been built and the machine
where the test is run are exactly the same. But this is not always the
case. As example, for armhf architecture, the machine where Mesa is
built is identified as `arm7hlf`, but the Raspberry Pi 4 is identified
as `armv7l`, so it will fail to load the ICD file, though both are
totally compatible.
This allow to define the architecture instead.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8745>
3 commits in 0.5.0:
- 20-40s savings on many of our CI runs by dropping the clever test size
scaling code.
- Even bigger savings (especially on deqp-vk runs) by increasing maximuim
test group size (~1/4 of runtime was spawning deqp on cheza, that cost
is cut by ~75%)
- No more needing to manually set MESA_DEBUG=silent
2 commits in 0.5.1:
- Fixed automatic thread pool sizing to keep all CPUs busy (thanks for
catching that Bas!).
- Automatically size down test groups on short test lists and many CPUs,
so split the list evenly between CPUs (such as on freedreno -options
jobs).
Acked-by: Daniel Stone <daniel@fooishbar.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8787>
This should help us avoid landing memory leaks (and some buffer overflows)
throughout the GL stack. I put the asan lib in x86_test-base because
we'll want asan for lavapipe, too.
This requires keeping debug symbols for the asan drivers in the artifacts,
as otherwise you can't do much with the backtraces it produces.
Closes: #3726
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8530>
I moved QPA-to-XML conversion to the runner, so Mesa CI (and developers!)
don't need to do quite so much in bash. I also made it clean up caselist
.qpa files since nobody ever wants them and we deleted them anyway. This
cleans up a ton of the job log output.
Additionally, I added a subcommend to turn the .csv into a junit output
that we can expose to gitlab. Now, the pipeline's status page will report
the failed testcases, and the "detail" button will give you a link to the
.XML to view for the failure. (We don't report all testcases because it's
too much load for the gitlab server). Note that this will 404 for the
LAVA runners for now, as they don't retain artifacts in gitlab (the plan
is to eventually have them minio upload the artifacts).
This uprev also includes a deqp output parsing fix, resulting in us
catching a couple more failures in some drivers.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8206>
