The vertex array Size and Stride attributes are now ubyte and short,
respectively. The glGet code needed to be updated to handle those
types, but wasn't.
Fixes the new piglit test gl-1.5-get-array-attribs test.
v2: fix inadvertant whitespace change, change COLOR_ARRAY_SIZE to UBYTE,
misc fixes suggested by Justin
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106450
Fixes: d5f42f96e1 ("mesa: shrink size of gl_array_attributes (v2)")
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
(cherry picked from commit d07466fe18)
From the bspec docs for "Indirect State Pointers Disable":
"At the completion of the post-sync operation associated with this
pipe control packet, the indirect state pointers in the hardware are
considered invalid"
So the ISP disable is a post-sync type of operation which means that it
should be combined with a CS stall. Without this, the simulator throws
an error.
Fixes: 766d801ca "anv: emit pixel scoreboard stall before ISP disable"
Fixes: f536097f6 "i965: require pixel scoreboard stall prior to ISP disable"
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
(cherry picked from commit a8a740f272)
We want to make sure that all indirect state data has been loaded into
the EUs before disable the pointers.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Fixes: 78c125af39 ("anv/gen10: Ignore push constant packets during context restore.")
(cherry picked from commit 766d801ca3)
Invalidating the indirect state pointers might affect a previously
scheduled & still running 3DPRIMITIVE (causing page fault). So stall
on pixel scoreboard before that.
v2: Fix compile issue :(
v3: Stall on pixel scoreboard
v4: Drop the post sync operation (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Fixes: ca19ee33d7 ("i965/gen10: Ignore push constant packets during context restore.")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106243
(cherry picked from commit f536097f67)
If you have an indirect access to a constant buffer on r600/eg
use a vertex fetch in the shader. However apps have expected
behaviour on those out of bounds accessess (even if illegal).
If the constants were being uploaded as part of a larger
upload buffer, we'd set the range of allowed access to a lot
larger than required so apps would get values back from
other parts of the upload buffer instead of the expected out
of bounds access.
This fixes rendering bugs in Trine and Witcher 1, thanks
to iive for nagging me effectively until I figured it out :-)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91808
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
(cherry picked from commit ce027ac5c7)
Out of tree builds can try to write into a directory that doesn't exist yet:
| Traceback (most recent call last):
| File "../../../mesa-18.0.2/src/intel/vulkan/anv_icd.py", line 46, in <module>
| with open(args.out, 'w') as f:
| IOError: [Errno 2] No such file or directory: 'vulkan/intel_icd.x86_64.json'
| Makefile:4882: recipe for target 'vulkan/intel_icd.x86_64.json' failed
Add missing MKDIR_GEN calls to solve this.
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 1755654d9f)
I forgot to change the assert in the second helper function in a
previous change.
This hit the assert() on a Broadwell platform with 1 slice, 3
subslices but all EUs disabled in subslice 1 & 2.
Fixes: c1900f5b0f ("intel: devinfo: add helper functions to fill fusing masks values")
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 3cdf1bf97d)
We used to only initialize BLORP on Gen6+. When we added it on Gen4-5,
we forgot to destroy it unconditionally.
Fixes: 752d7af77a (i965: Add blorp support for gen4-5)
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 2dc29e095f)
This behaviour was changed in 1e5b09f42f. The commit message
for that says it is just a “tidy up” so my assumption is that the
behaviour change was a mistake. It’s a little hard to decipher looking
at the diff, but the previous code before that patch was:
if (builtin == SpvBuiltInFragCoord || builtin == SpvBuiltInSamplePosition)
nir_var->data.origin_upper_left = b->origin_upper_left;
if (builtin == SpvBuiltInFragCoord)
nir_var->data.pixel_center_integer = b->pixel_center_integer;
After the patch the code was:
case SpvBuiltInSamplePosition:
nir_var->data.origin_upper_left = b->origin_upper_left;
/* fallthrough */
case SpvBuiltInFragCoord:
nir_var->data.pixel_center_integer = b->pixel_center_integer;
break;
Before the patch origin_upper_left affected both builtins and
pixel_center_integer only affected FragCoord. After the patch
origin_upper_left only affects SamplePosition and pixel_center_integer
affects both variables.
This patch tries to restore the previous behaviour by changing the
code to:
case SpvBuiltInFragCoord:
nir_var->data.pixel_center_integer = b->pixel_center_integer;
/* fallthrough */
case SpvBuiltInSamplePosition:
nir_var->data.origin_upper_left = b->origin_upper_left;
break;
This change will be important for ARB_gl_spirv which is meant to
support OriginLowerLeft.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Fixes: 1e5b09f42f "spirv: Tidy some repeated if checks..."
(cherry picked from commit e17d0ccbbd)
Similar to swap_available path send invalidate to the driver because
egl/X11 is not watching for for server's invalidate events. The
dri2_copy_region path is trigerred when server supports DRI2 version
minor 1.
Tested with piglit egl tests for regression.
V2: Move invalidate from dri2_copy_region to swap_buffer common.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit 9a21c96126)
16-bit immediates need to replicate the 16-bit immediate value
in both words of the 32-bit value. This needs to be careful
to avoid sign-extension, which the previous implementation was
not handling properly.
For example, with the previous implementation, storing the value
-3 would generate imm.d = 0xfffffffd due to signed integer sign
extension, which is not correct. Instead, we should cast to
uint16_t, which gives us the correct result: imm.ud = 0xfffdfffd.
We only had a couple of cases hitting this path in the driver
until now, one with value -1, which would work since all bits are
one in this case, and another with value -2 in brw_clip_tri(),
which would hit the aforementioned issue (this case only affects
gen4 although we are not aware of whether this was causing an
actual bug somewhere).
v2: Make explicit uint32_t casting for left shift (Jason Ekstrand)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "18.0 18.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f0e6dacee5)
From Intel Skylake PRM, vol 07, "Immediate" section (page 768):
"For a word, unsigned word, or half-float immediate data,
software must replicate the same 16-bit immediate value to both
the lower word and the high word of the 32-bit immediate field
in a GEN instruction."
This fixes the int16/uint16 negate and abs immediates that weren't
taking into account the replication in lower and upper words.
v2: Integer cases are different to Float cases. (Jason Ekstrand)
Included reference to PRM (Jose Maria Casanova)
v3: Make explicit uint32_t casting for left shift (Jason Ekstrand)
Split half float implementation. (Jason Ekstrand)
Fix brw_abs_immediate (Jose Maria Casanova)
Cc: "18.0 18.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 2a76f03c90)
Apparently the somewhere between 1.1.70 and 1.1.73 the loader started
depending on this. The loader then creates a 1.0 instance, which gets
into funny situation because we have a 1.1 device.
No idea how to do line wrapping in Mako though, my random guesses
did not work.
CC: 18.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 9267ff9883)
Both the internal documentation and the results of testing this in the
CI suggest that this is unnecessary. Add the fixes tag because this
reduces an internal benchmark's startup time by about 17 seconds
(reported by Eero).
Fixes: 710b1d2e66 "i965/tex_image: Flush certain subnormal ASTC channel values"
Tested-by: Eero Tamminen <eero.t.tamminen@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 3e56e4642f)
Previously before fb077b0728, the LOD parameter was being used in place of the
sample index, which would only copy the first sample to all samples in the
destination image. After that multisample image copies wouldn't copy anything
from my observations.
This fixes some copy_and_blit CTS tests.
v3.1: - set lod to 0 for nir_txf_ms (Samuel)
v2: - use GLSL_SAMPLER_DIM_MS instead of 2D (Samuel)
- updated commit description (Samuel)
Fix this properly by copying each sample in a separate radv_CmdDraw and using a
pipeline with the correct rasterizationSamples for the destination image.
Cc: 18.0 18.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
(cherry picked from commit 97d57ef917)
A bo's ref_count was not being initialized when imported from an fd.
Therefore, we would fail to free the resource during VkFreeMemory().
This patch fixes applications like hifi VR in threaded mode, which
perform frequent imports/releases of IPC shared memory.
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
CC: 18.0 18.1 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f56e22e496)
The blit here involves scaling since it's copying from I8 format to R8G8 format.
Half of source will be filtered out with PIPE_TEX_FILTER_NEAREST instruction, it
looks that GPU always uses the second half as source. Currently we use "1" as
the start point of x for R, then causing 1 source pixel of U component shift to
right. So "-1" should be the start point for U component.
Cc: 18.0 18.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 1c5f4f4e17)
They are send messages and this makes size_read() and mlen agree. For
both of these opcodes, the payload is just a dummy so mlen == 1 and this
should decrease register pressure a bit.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit de1f22d595)
If an EGLSurface is created, made current and destroyed, and then a second
EGLSurface is created. Then the second malloc in driCreateNewDrawable may
return the same pointer address the first surface's drawable had.
Consequently, when dri_make_current later tries to determine if it should
update the texture_stamp it compares the surface's drawable pointer against
the drawable in the last call to dri_make_current and assumes it's the same
surface (which it isn't).
When texture_stamp is left unset, then dri_st_framebuffer_validate thinks
it has already called update_drawable_info for that drawable, leaving it
unvalidated and this is when bad things starts to happen. In my case it
manifested itself by the width and height of the surface being unset.
This is fixed this by setting the pointer to NULL before freeing the
surface.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106126
Signed-off-by: Johan Klokkhammer Helsing <johan.helsing@qt.io>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Cc: 18.0 18.1 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit dab02dea34)
