MCS buffers are never allocated on Broadwell, so this does nothing for
now, but puts the infrastructure in place for when they do exist.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
(cherry picked from commit a248b2a4eb)
According to the documentation, we don't need this SINT workaround on
Broadwell. (Or at least, it doesn't mention that we need it.)
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
(cherry picked from commit e10311be9f)
Broadwell generalizes the MCS fields to allow for multiple kinds of
auxiliary surfaces. This patch adds the plumbing to set those values,
but doesn't yet hook any up.
v2: (by Jordan Justen) Use mt for qpitch; pitch is tiles - 1.
v3: Don't forget to subtract 1 from aux_mt->pitch.
v4: Drop unnecessary aux_mt->offset (caught by Jordan Justen).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
(cherry picked from commit fd77187689)
This is the only case where a fs_reg in brw_fs_visitor is used during
optimization/code generation, and it meant that optimizations had to be
careful to not move pixel_x/y's register number without updating it.
Additionally, it turns out we had a couple of other UW values that weren't
getting this treatment (like gl_SampleID), so this more general fix is
probably a good idea (though I wasn't able to replicate problems with
either pixel_[xy]'s values or gl_SampleID, even when telling the register
allocator to reuse registers immediately)
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 66f5c8df06)
This code should execute without regard to the currently executing
channels. Asking for gl_SampleID inside control flow might break in
strange ways. It appears to break even at the top of the program in
SIMD16 mode occasionally as well.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 6dc9e4e22a19108057162d9d8f8c7d559545f8de)
Using brw_imm_* creates a source with file=HW_REG, and the scheduler
inserts barrier dependencies when it sees HW_REG. None of these are
hardware-registers in the sense that they're special and scheduling
shouldn't touch them. A few of the modified cases already have HW_REGs
for other sources, so it won't allow extra flexibility in some cases.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit c938be8ad2)
(This patch was cherry-picked to make the next commit apply cleanly.)
gen8_fs_generator uses these to decide whether to set the execution size
to 8 or 16, so we incorrectly made both of these MOVs the full width in
SIMD16 shaders. (It happened to work out on Gen4-7.)
Setting them should also help inform optimization passes what's really
going on, which could help avoid bugs.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: mesa-stable@lists.freedesktop.org
Both inst->force_uncompressed and inst->force_sechalf mean that the
generated instruction should be uncompressed and have an execution size
of 8. We don't require the visitor to set both flags - setting
inst->force_sechalf by itself is supposed to be enough.
On Gen4-7, guess_execution_size() demoted instructions to 8-wide based
on the default compression state. On Gen8+, we instead set a default
execution size, which worked great...except that we forgot to check
inst->force_sechalf when deciding whether to use 8 or 16.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 1c62126612752f6eedb66f705cc3ff1e11beea5d)
The emit_math?_gen? functions serve to implement workarounds for the
math instruction, none of which exist on Gen8+.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit b24e1cc604)
The negation source modifier on src registers has changed meaning in Broadwell when
used with logical operations. Don't copy propagate when negate src modifier is set
and when the destination instruction is a logical op.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
(cherry picked from commit c17db7537f)
The negation source modifier on src registers has changed meaning in Broadwell when
used with logical operations. Don't copy propagate when negate src modifier is set
and when the destination instruction is a logical op.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
(cherry picked from commit 609d00e13e)
Pack the depth value before overwriting it with cube coordinates.
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit b279f0143f)
Conflicts:
src/gallium/drivers/radeonsi/si_shader.c
This doesn't fix any known issue. In fact, radeon drivers ignore all
the discard flags for textures and implicitly do "discard range"
for any write transfer.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
(cherry picked from commit fe6be9926f)
Something about how we're implementing offsets for TXD is wrong, just
flip to the generic quadop-based implementation in that case.
This is the minimal fix appropriate for backporting.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 114d46829d)
Unfortunately there's no good way to do this on the nv50 shader isa.
Dropping the bias seems preferable to doing the compare post-filtering.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 1065aa92f4)
Add support for more vertex buffer formats.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 06e9536e5f)
Squashed with:
freedreno: update generated headers
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit ba6a490bbc)
Some apps seem to give us a null sampler/view for texture slots which
come before the last used texture slot. In particular 0ad triggers
this.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 6aeeb706d2)
Seems the opcodes are slightly different from a2xx. Resync headers and
move blend_func() helper into hw generation specific code.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit a4d229b099)
We already multiply by bytes per pixel for this, so f3ba7611 broke
mem2gmem for depth/stencil. Drop the now-redundant mutiply by cpp.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit b81de5352d)
In cases where there was no color buf bound, there were inconsistancies
in register settings related to position of depth/stencil inside GMEM.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit f3ba761129)
Squashed with:
freedreno: update generated headers
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 4da8267c36)
These aren't buffers we ever read back from CPU, so using incorrect
reloc fxn wasn't really harming anything. But might as well be correct.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 0d54904c04)
Fixes:
Program received signal SIGSEGV, Segmentation fault.
bind_samplers (comp=0x21b054, comp=0x21b054, ctx=0x211430)
at ../../../../../src/gallium/state_trackers/xa/xa_composite.c:445
445 mask_pic->srf->tex->format);
(gdb) bt
#0 bind_samplers (comp=0x21b054, comp=0x21b054, ctx=0x211430)
at ../../../../../src/gallium/state_trackers/xa/xa_composite.c:445
#1 xa_composite_prepare (ctx=0x211430, comp=comp@entry=0x21b054)
at ../../../../../src/gallium/state_trackers/xa/xa_composite.c:488
#2 0xb6f454b4 in XAPrepareComposite (op=<optimized out>, pSrcPicture=<optimized out>,
pMaskPicture=<optimized out>, pDstPicture=<optimized out>, pSrc=0x5b3ad8, pMask=0x0,
pDst=0x5923b8) at msm-exa-xa.c:533
We can't yet handle solid fill mask, so explicitly reject that, rather
than segfaulting. Otherwise DDX would need to check XA version to see
if solid fill mask were supported.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit b7e7ae9f60)
The hardware allows multiple simultaneous renders with the same
memory-backed constbufs but with each invocation having different
values. However in order for that to work, the data has to be streamed
in via the right constbuf slot. We weren't doing that for UBOs.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2 10.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit b2b7c65122)
Previously, we were assuming that kernel metadata nodes only had 1 operand.
Kernels which have attributes can have more than 1, e.g.:
!0 = metadata !{void (i32 addrspace(1)*)* @testKernel, metadata !1}
!1 = metadata !{metadata !"work_group_size_hint", i32 4, i32 1, i32 1}
Attempting to get the kernel without the correct number of attributes led
to memory corruption and luxrays crashing out.
Fixes the cl/program/execute/attributes.cl piglit test.
Signed-off-by: Aaron Watry <awatry@gmail.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76223
CC: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 824197efd5)
If XA fails to initialize with pipe_loader enabled, the pipe_loader's
cleanup function will close the drm file descriptor. That's pretty bad
because the file descriptor will probably be the X server driver's only
connection to drm. Temporarily solve this by dup()'ing the file descriptor
before handing it over to the pipe loader.
This fixes freedesktop.org bugzilla bug #80645.
v2: Fix CC addresses.
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
(cherry picked from commit 35cf3831d7)
Conflicts:
src/gallium/state_trackers/xa/xa_tracker.c
Apparently INTEL_DEBUG=fs has crashed on Broadwell for anything using
ARB_fragment_program since commit 9cee3ff5. We need to NULL-check the
right field.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit c60a4ba7e3)
Conflicts:
src/mesa/drivers/dri/i965/gen8_fs_generator.cpp
While the official INTEL_swap_event specification says that the drawable
field should contain the GLXDrawable, not the Drawable, the existing
DRI2 code in dri2.c that translates from DRI2_BufferSwapComplete sends out
GLX_BufferSwapComplete with the Drawable's ID, so existing codebases
like Clutter/Cogl rely on getting the Drawable.
Match DRI2's error here and stuff the event with the X Drawable, not
the GLX drawable.
This fixes apps seeing wrong drawables through an indirect GLX context
or with DRI3, which uses the GLX_BufferSwapComplete event directly on
the wire instead of translates Present in mesa.
At the same time, also modify the structure for the event to make sure
that clients don't make the same mistake. This is not an API or ABI
break, as GLXDrawable and Drawable are both typedefs for XID.
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit b4dcf87f34)
Intel would like us to include the marketing names. Developers
additionally want "Broadwell GT1/2/3" because it makes it easier
to identify what hardware users have when they request assistance
or report issues.
Including both makes it easy for everyone to map between the names.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 05126b9bb5)
nouveau screens are reused for the same device node. However in the
scenario where we create screen 1, screen 2, and then delete screen 1,
the surrounding code might also close the original device node. To
protect against this, dup the fd and use the dup'd fd in the
nouveau_device. Also tell the nouveau_device that it is the owner of the
fd so that it will be closed on destruction.
Also make sure to free the nouveau_device in case of any failure.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79823
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@ubuntu.com>
(cherry picked from commit a59f2bb17b)
Previously, if we had something like:
gl_ViewportIndex = idx;
for(int i = 0; i < gl_in.length(); i++) {
gl_Position = gl_in[i].gl_Position;
EmitVertex();
}
EndPrimitive();
The right viewport index would not be set on the primitive because the
last vertex is the provoking one. However blob drivers appear to move
the gl_ViewportIndex write into the for loop, allowing the application
to be ignorant of this detail.
While the application is technically wrong here, because the blob does
it and other drivers appear to implicitly work this way as well, we add
a buffer register that viewport index writes go into, which is then
exported before every EmitVertex() call.
This fixes the remaining piglit tests in ARB_viewport_array for nv50/nvc0.
Signed-off-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
(cherry picked from commit 98a86f61a8)
The old logic would let all negative values go through unclamped, with
potentially disastrous results (probably trying to fetch viewport values
from random memory locations). GL has undefined rendering for vp indices
outside valid range but that's a bit too undefined...
(The logic is now the same as in llvmpipe.)
CC: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Tested-by: Ilia Mirkin <imirkin@alum.mit.edu>
(cherry picked from commit 604e54de78)
As far as I can tell, Broadwell doesn't need any of the SURFACE_STATE
workarounds for textureGather() bugs, so there's no need to emit
a second set of identical copies.
To keep things simple, just point the gather surface index base to the
same place as the texture surface index base.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f6a99d1167)
Fix an off by one in the texture unit walk during texblend
setup on gen2. This caused the last enabled texunit to be
skipped resulting in totally messed up texturing.
This is a regression introduced here:
commit 1ad443ecdd
Author: Eric Anholt <eric@anholt.net>
Date: Wed Apr 23 15:35:27 2014 -0700
i915: Redo texture unit walking on i830.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit ca55a1aaa7)
When the last context in a share group is destroyed, the hash table
containing all of the shader programs (ctx->Shared->ShaderObjects) is
destroyed, throwing away all of the shader programs.
Using a static variable to store program IDs ends up holding on to them
after this, so we think we still have a compiled program, when it
actually got destroyed. _mesa_UseProgram then hits GL errors, since no
program by that ID exists.
Instead, store the program IDs in the context, so we know to recompile
if our context gets destroyed and the application creates another one.
Fixes es3conform tests when run without -minfmt (where it creates
separate contexts for testing each visual).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77865
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit a20994d616)
Conflicts:
src/mesa/drivers/dri/i965/brw_meta_stencil_blit.c
Prior to GLX 1.3 there was the glxMakeCurrent() function that took a
single drawable handle. The Drawable could be either a bare XID for a
Window or an XID for a glxpixmap.
GLX 1.3 added glxMakeContextCurrent that takes 2 handles: one for
reading, one for writing. Nowadays the old glxMakeCurrent call is
implemented as a call to glxMakeContextCurrent with the single handle
duplicated.
Because of this it is allowed to use a plain-old Window ID as an
argument to glxMakeContextCurrent, although nobody really documents this
sort of thing. The manpage for the NEW call specifies the arguments as
GLXPixmaps, but the actual code accepts Window XIDs too, and handles
them correctly.
Similarly, the glxSelectEvents function can also take a bare Window XID.
The "piglit" tests all use GLXWindows and/or GLXPixmaps. You never
tested swap events with a bare Window XID. That is what my app was
doing.
The swap_events code worked with Window XIDs in mesa 7.x.y. The new code
added in versions 8, 9, and 10 assumes that all buffer swap events have
a GLXPixmap associated with them. Because of the historical quirks
above, this is not true. Swap events for bare Window XIDs do NOT have a
glxpixmap resulting in a segfault.
Any app that uses the old school glxMakeCurrent call with a Window XID
while trying to use swap_events will crash when the libs try to lookup
the nonexistent GLXPixmap associated with the incoming swap event.
I believe that the people who wrote the spec overlooked this, because
the "sbc" field comes from the OML_sync extension that is defined in
terms of glxpixmaps only.
v2 (idr): Formatting changes.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54372
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 86bd2196b4)
An LLVMContext should only be accessed by a single and using the global
context was causing crashes in multi-threaded environments. Now we use
a separate context for each compile.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
CC: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 4aa128a123)
This is just a hack, it should be possible to create a temporary zeta
surface and render to that instead. However that's more complicated and
this avoids the render being entirely broken and errors being reported
by the card.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 25182e249e)
A drawable size of 0x0 means that we don't have buffers for a drawable yet,
not that we have a zero-sized buffer. Core mesa shouldn't be optimizing out
drawing based on buffer size, since the draw call could be what triggers
the driver to go and get buffers. As discussed in the referenced bug report,
the optimization was added as part of a scatter-shot attempt to fix a
different problem. There's no other example in mesa core of using the
buffer size in this way.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74005
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 7928b946ad)
Like on Haswell, we need to use 8x4 aligned rectangle primitives for
hierarchical depth buffer resolves and depth clears. See the comments
in brw_blorp.cpp's brw_hiz_op_params() constructor. (The Broadwell
documentation confirms that this is still necessary.)
This patch makes the Broadwell code follow the same behavior as Chad and
Jordan's Gen7 BLORP code. Based on a patch by Topi Pohjolainen.
This fixes es3conform's framebuffer_blit_functionality_scissor_blit
test, with no Piglit regressions.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 49659ad90c)
We've used the LD sampler message for pull constant loads on earlier
hardware for some time, and also were already using it for the FS on
Broadwell. This patch makes us use it for Broadwell VS/GS as well.
I believe that when I wrote this code in 2012, we still used the data
port in some cases, and I somehow neglected to convert it while
rebasing.
Improves performance in GLBenchmark 2.7 Egypt by 416.978% +/- 2.25821%
(n = 17). Many other applications should benefit similarly: this speeds
up uniform array access in the VS, which is commonly used for skinning
shaders, among other things.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Ben Widawsky <ben@bwidawsk.net>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 5d8e246ac8)
When faced with code such as:
mov vgrf31.0:UD, 960D
mov vgrf31.1:UD, vgrf30.xxxx:UD
The dead code eliminator didn't consider reg_offsets, so it decided that
the second instruction was writing was writing to the same register as
the first one, and eliminated the first one. But they're actually
different registers.
This fixes INTEL_DEBUG=shader_time for vertex shaders. In the above
code, vgrf31.0 represents the offset into the shader_time buffer where
the data should be written, and vgrf31.1 represents the actual time
data. With a completely undefined offset, results were...unexpected.
I think this is probably one of the few cases (maybe only case) where we
generate multiple MOVs to a large VGRF. Normally, we just use them as
texturing results; the other SEND-from-GRF uses a size 1 VGRF.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79029
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit d0575d98fc)
When a multisampled texture is used for sampling the fast clear color value
needs to be programmed into the surface state. This was being left as all
zeroes so if the surface was cleared to a value other than black then it
wouldn't work properly. This doesn't matter for single-sample textures because
in that case the MCS buffer is resolved before it is used as a texture source.
https://bugs.freedesktop.org/show_bug.cgi?id=79729
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 765efeef88)
When walking backwards, we want to stop at the head sentinel, which is
where scan_inst->prev->prev == NULL, not scan_inst->prev == NULL.
Fixes random crashes, as well as valgrind errors.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit ecc78eab11)
This fixes:
In file included from
/home/adrian/workspace/mesa/mesa-master.git/src/mesa/vbo/vbo_exec_api.c:445:0:
/home/adrian/workspace/mesa/mesa-master.git/src/mesa/vbo/vbo_attrib_tmp.h:28:38:
fatal error: util/u_format_r11g11b10f.h: No such file or directory
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Adrian Negreanu <adrian.m.negreanu@intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
(cherry picked from commit 0048483f73)
Fixes linker error:
ld:
.../libmesa_dri_common_intermediates/libmesa_dri_common.a(dri_util.o):
in function globalDriverAPI:dri_util.c(.data.rel+0x0): error:
undefined reference to 'driDriverAPI'
As an example, you can see that mesa_dri_drivers
also uses common/libmegadriver_stub (src/mesa/drivers/dri/Makefile.am)
The _stub part might be confusing, but
it actually provides the dri-driver shared lib constructor,
megadriver_stub_init, which will later on load the real
platform dependent part and call
l __driDriverGetExtensions_<platform>
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Adrian Negreanu <adrian.m.negreanu@intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
(cherry picked from commit aba0f152be)
A recent ApiTrace change, that tries to dump more buffer state
causes Mesa from my distro (10.1.4) to segfaults here.
I haven't actually confirm this fixes it (I can't repro on master),
but it seems a good idea to be defensive here anyway.
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit eb58aa9cf0)
There is a short-immediate version as well, but it should never end up
getting used since it would have gotten folded earlier.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit bd7dd3ed06)
In the presence of LLVM the final library exports every symbol from
the llvm namespace. Resolve this by using a version script (w/o the
version/name tag).
Considering that there are only ~35 symbols, explicitly list them
to minimize the chances of rogue symbols sneaking in.
v2: Conditionally include the version-script.
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> (v1)
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit a75baba2f1)
Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
While resolving conflicts in cherry picking commit d226191, I
accidentally introduced some garbage. Because radeonsi isn't built by
default, the problem went unnoticed by me.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reported-by: Laurent Carlier <lordheavym@gmail.com>
Tested-by: Laurent Carlier <lordheavym@gmail.com>
The nouveau fw currently prints a bunch of errors. No point in seeing
those all the time, esp since compute doesn't really work in the first
place.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Conflicts:
src/gallium/drivers/nouveau/nvc0/nvc0_screen.c
(cherry picked from commit ca65fc418f)
The new hardware actually supports this OpenGL 1.x feature natively,
so we can finally drop our shader workarounds.
Not many applications use GL_CLAMP, and most use it unintentionally, but
it's trivial to do right, so we should.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 221169693b)
We have customers using NULL as a way to test the robustness of the API.
Without this check, EGL will segfault trying to dereference
dri2_surf->wl_win->private because wl_win is NULL.
This fix adds a check and sets EGL_BAD_NATIVE_WINDOW
v2: Incorporated feedback from idr - moved the check to a higher level
function.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 91ff0d4c65)
For some reason, CP DMA doesn't follow the predicate bit if I enable it,
so this is the only option.
This fixes piglit: spec/NV_conditional_render/clear
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit bf701a84eb)
Same as b026b6bbfe, but
COLOR_ARRAY_SIZE/SECONDARY_COLOR_ARRAY_SIZE.
Ideally we wouldn't munge the incoming state, so that we wouldn't need
to unmunge it back on glGet*. But the array size state is copied and
referred in many places, many of which couldn't take an GLenum like
GL_BGRA instead of a plain integer. So just hack around on glGet*,
to ensure there is no risk of introducing regressions elsewhere.
This bug causes problems to Apitrace, resulting in wrong traces. See
https://github.com/apitrace/apitrace/issues/261 for details.
Tested with piglit arb_vertex_array_bgra-get, which was created for this
purpose.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit e3e13d6b85)
EGL 1.4 Specification says that
eglMakeCurrent(display, EGL_NO_SURFACE, EGL_NO_SURFACE, EGL_NO_CONTEXT)
can be used to release the current thread's ownership on the surfaces
and context.
MESA's egl implementation was only accepting the parameters when the
KHR_surfaceless_context extension is supported.
[chadv] Add quote from the EGL 1.4 spec.
Cc: "10,1, 10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
(cherry picked from commit 0ca0d5743f)
Framebuffers can have NULL attachments since a while. llvmpipe handled
that properly for lp_rast_shade_quads_mask but it seems the change didn't
make it to lp_rast_shade_tile.
This fixes piglit fbo-drawbuffers-none test (though I need to increase
the FB_SIZE from 32 to 256 so the tris cover some tiles fully).
https://bugs.freedesktop.org/show_bug.cgi?id=79421
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
(cherry picked from commit 576868140b)
mesaVisual can be NULL with configless context since this commit:
commit 551d459af4
Author: Neil Roberts <neil@linux.intel.com>
Date: Fri Mar 7 18:05:47 2014 +0000
Add the EGL_MESA_configless_context extension
...
Previously the i965 and i915 drivers were explicitly creating a zeroed visual
whenever 0 is passed for the EGLConfig.
We attempt to dereference the visual in i915 and now we don't create a
zeroed-out one one it crashes, breaking at least weston in an i915. There's
no point in doing so as it would be zero anyway.
v2: Fixed a typo in commit message. Added some tags.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1100967
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 90b5747856)
These prototypes are necessary because GLES1 library builds will create
dispatch functions for them. We can't directly include GLES/gl.h
because it would conflict the previously-included GL/gl.h. Since GLES1
ABI is not expected to every add more functions, the path of least
resistance is to just duplicate the prototypes for the functions that
aren't already in desktop OpenGL.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79294
Acked-by: Matt Turner <mattst88@gmail.com>
Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 7b1aeec9cd)
In commit af38ef907, I added a "fix" to color outputs not being assigned
correctly when sample mask was being output. This was totally wrong --
the color indices (i.e. "si" values) were the ones that were wrong. Undo
that hunk.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 0d699530ff)
Requested-by: Ilia Mirkin <imirkin@alum.mit.edu>
Commit c5d822dad9 added support for sample mask incorrectly. It became
treated as a color output, and messed up the color output indices.
Revert the hunk that did that, and add explicit support just like for
depth/stencil writes.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Acked-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit ab7bd7093d)
Requested-by: Ilia Mirkin <imirkin@alum.mit.edu>
Fixes:
xa_tracker.c: In function 'xa_tracker_create':
xa_tracker.c:147:5: error: implicit declaration of function 'pipe_loader_drm_probe_fd' [-Werror=implicit-function-declaration]
in some build configurations, as XA now implicitly depends on
gallium_drm_loader.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
(cherry picked from commit 20d14ef263)
Bugzilla: https://bugs.gentoo.org/show_bug.cgi?id=511700
Requested-by: Matt Turner <mattst88@gmail.com>
There is no reason anymore to load with RTLD_GLOBAL and for some driver
this even result in dlclose failing to unload leading to catastrophic
failure with swrast fallback.
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
(cherry picked from commit e3cc0d90e1)
The call to get_variable_being_redeclared() may delete 'var' so we
can't reference var->name afterward. We fix that by examining the
var's name before making that call.
Fixes valgrind warnings and possible crash when running the piglit
tests/spec/glsl-1.30/execution/clipping/vs-clip-distance-in-param.shader_test
test (and probably others).
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit f9cecca7a6)
Previously, we set up new entries in the params[] array on every access
of a rectangle texture. Unfortunately, we only reserve space for
(2 * MaxTextureImageUnits) extra entries, so programs which accessed
rectangle textures more times than that would write off the end of the
array and likely crash.
We don't really have a decent mapping between the index returned by
_mesa_add_state_reference and our index into the params array, so we
have to manually search for it.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78691
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit bb9623a1a8)
Fixes framebuffer_blit_functionality_multisampled_to_singlesampled_blit
es3 cts test on bdw. Also fixes this on ivb when ivb is forced to use
the meta path.
No piglit regressions on IVB.
Further input from Ken:
"Unfortunately, this doesn't fix MRT for integer data.
In the single-sampled case, since we're directly copying data, we were
read/copy/write data as "float" values, which actually contained the
integer bits. Here, we can't do that since we need to process the
actual integer data.
I do wonder if we could use intBitsToFloat/uintBitsToFloat to stuff the
integer bits in the float gl_FragColor output. Just a crazy idea.
In the long term (post 10.2), I think we should draft an extension that
allows you to do "layout(location = all)" on user-defined fragment
shader outputs. (Or some similar syntax.)"
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit a6022e5405)
This reverts commit a6860100b8.
Why this code didn't work in all circumstances is unknown and without a
working Ironlake simulator (which uses a different AUB format) we'll
probably never know, short of a lot of experimentation, and spending a
bunch of time to try to optimize a few instructions on Ironlake is not
time well spent.
Moreover, for mix(vec4, vec4, vec4) using the accumulator introduces a
dependence between the otherwise independent per-component calculations.
Not using the accumulator, even if it means an extra instruction per
component might be preferable. We don't know, we don't have data, and
we don't have the necessary register on Ironlake for shader_time to tell
us.
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77707
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit c2c639ecf6)
This reverts commit 2dfbbeca50 with the
comment about MAC and implicit accumulator removed.
Why this code didn't work in all circumstances is unknown and without a
working Ironlake simulator (which uses a different AUB format) we'll
probably never know, short of a lot of experimentation, and spending a
bunch of time to try to optimize a few instructions on Ironlake is not
time well spent.
Moreover, for mix(vec4, vec4, vec4) using the accumulator introduces a
dependence between the otherwise independent per-component calculations.
Not using the accumulator, even if it means an extra instruction per
component might be preferable. We don't know, we don't have data, and
we don't have the necessary register on Ironlake for shader_time to tell
us.
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77703
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit db42dd8952)
Note that predicated instructions with defs are still not supported
because transformation to SSA doesn't handle them yet.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 452a4151aa)
The glGetGraphicsResetStatusARB from ARB_robustness extension always
returns GUILTY_CONTEXT_RESET_ARB and never returns NO_ERROR for guilty
context with LOSE_CONTEXT_ON_RESET_ARB strategy. This is because Mesa
returns GUILTY_CONTEXT_RESET_ARB if batch_active !=0 whereas kernel
driver never reset batch_active and this variable always > 0 for guilty
context. The same behaviour also can be observed for batch_pending and
INNOCENT_CONTEXT_RESET_ARB.
But ARB_robustness spec says:
If a reset status other than NO_ERROR is returned and subsequent calls
return NO_ERROR, the context reset was encountered and completed. If a
reset status is repeatedly returned, the context may be in the process
of resetting.
8. How should the application react to a reset context event?
RESOLVED: For this extension, the application is expected to query the
reset status until NO_ERROR is returned. If a reset is encountered, at
least one *RESET* status will be returned. Once NO_ERROR is
encountered, the application can safely destroy the old context and
create a new one.
The main problem is the context may be in the process of resetting and
in this case a reset status should be repeatedly returned. But looks
like the kernel driver returns nonzero active/pending only if the
context reset has already been encountered and completed. For this
reason the *RESET* status cannot be repeatedly returned and should be
returned only once.
The reset_count and brw->reset_count variables can be used to control
that glGetGraphicsResetStatusARB returns *RESET* status only once for
each context. Note the i915 triggers reset_count twice which allows to
return correct reset count immediately after active/pending have been
incremented.
v2 (idr): Trivial reformatting of comments.
Signed-off-by: Pavel Popov <pavel.e.popov@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 8dc4a98c44)
If the source renderbuffer has a depth > 0, then send a Z texcoord
which is set to the source attachment Z offset.
This fixes piglit's gl-3.2-layered-rendering-gl-layer-render with the
GL_TEXTURE_2D_MULTISAMPLE_ARRAY case test on i965/gen8.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 57876fee38)
brw_color_buffer_write_enabled depends on brw->fragment_program, which
means we have to listen to BRW_NEW_FRAGMENT_PROGRAM.
On most generations, this was only called from a function that already
subscribed. However, on Broadwell, we failed to listen to the necessary
event in the atom that emits 3DSTATE_PS_BLEND.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 746921cbb4)
I forgot to disable writemasking on the OR and MOV which set the render
target index and "source 0 alpha present to render target" bit.
Using get_element_ud is equivalent and avoids a line-wrap.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 7d3985ca6c)
_mesa_meta_setup_blit_shader() currently generates a fragment shader
which, irrespective of the number of draw buffers, writes the color
to only one 'out' variable. Current shader rely on an undefined
behavior and possibly works by chance.
From OpenGL 4.0 spec, page 256:
"If a fragment shader writes to gl_FragColor, DrawBuffers specifies a
set of draw buffers into which the single fragment color defined by
gl_FragColor is written. If a fragment shader writes to gl_FragData,
or a user-defined varying out variable, DrawBuffers specifies a set
of draw buffers into which each of the multiple output colors defined
by these variables are separately written. If a fragment shader writes
to none of gl_FragColor, gl_FragData, nor any user defined varying out
variables, the values of the fragment colors following shader execution
are undefined, and may differ for each fragment color."
OpenGL 4.4 spec, page 463, added an additional line in this section:
"If some, but not all user-defined output variables are written, the
values of fragment colors corresponding to unwritten variables are
similarly undefined."
V2: Write color output to gl_FragColor instead of writing to multiple
'out' variables. This'll avoid recompiling the shader every time
draw buffers count is updated.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 46737cebd3)
In commit 4be146b1, I neglected to add the new property to the strings
array. This leads to the string '(null)' to be printed instead when
converting a GS shader to text.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
(cherry picked from commit cdeb7004e0)
Make sure to normalize the z coordinates as well as the x/y ones when
there are mipmaps present. Fixes 3d mipmap generation, which now uses
the blit path.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
(cherry picked from commit 28360fcad7)
These instructions can come in either through IMUL_HI/UMUL_HI TGSI
opcodes, or from OP_DIV constant folding.
Also make sure that the constant foldings which delete the original
instruction still get counted as having done something.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
(cherry picked from commit d2a3de19c6)
Retrieving the high 32 bits of a signed multiply is rather annoying. It
appears that the simplest way to do this is to compute the absolute
value of the arguments, and perform a u32 x u32 -> u64 operation. If the
arguments' signs differ, then negate the result. Since there is no u64
support in the cvt instruction, we have the perform the 2's complement
negation "by hand".
This logic can come into use by the IMUL_HI instruction (very unlikely
to be seen), as well as from constant folding of division by a constant.
Fixes dolphin's divisions by 255.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
(cherry picked from commit d3a5cf052c)
Separating the software fallbacks from the rest of the meta path (which
is usually hardware accelerated) gives callers better control over their
blitting options.
For example, i965 might want to try meta blit, hardware blits, then
swrast as a last resort. Splitting it makes that possible.
This updates all callers to maintain the existing behavior (even in the
few cases where it isn't desirable behavior - later patches can change
that).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 54540ea691)
UNION appears to expect that all of its sources are conditionally
defined. Otherwise it inserts an unpredicated mov instruction which
overwrites the desired result. This fixes tests that use UMUL_HI, and
much less directly, unsigned integer division by a constant, which uses
this functionality in a peephole pass.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
(cherry picked from commit 5b8f1a0f7c)
I think a3xx and later should support (it is part of GLES3), but this
isn't needed for the time being and still needs to be reversed.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Gallium already gives us height==1 for these, so the texture state is
already setup correctly to emulate 1D textures as a Nx1 2D texture. We
just need to supply the .y coord.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
That was easy. Turns out it is just a matter of setting one bit.
Enable sampling from sRGB texture, and therefore enable GL 2.1 :-)
Signed-off-by: Rob Clark <robclark@freedesktop.org>
The loops for updating the multiple packed fields in SP_VS_OUT[] and
SP_VS_VPC_DST[] will zero out one register beyond the last that on
required. Which is normally not a problem (and is kinda convenient
when looking at cmdstream dumps) unless we have maximum (16) varyings.
Fix loop termination condition so that this does not happen.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
We need to size input/output tables big enough for special inputs/
outputs (gl_Position, gl_FrontFacing, etc) which, while they don't
count towards the hw limit of 16 attributes or 16 varyings, we do
still need to track them all the same.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Hardware only supports 16. Which fd3_shader_variant properly reflected,
but the pipe cap did not, leading to array overflow (and shaders that
could not possibly work).
Also a bunch of asserts to make problems like this easier to see.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
The KILL_IF opcode could potentially be merged in to the regular KILL
opcode function. It was a pain to do so, so I've left is separated
for cleanliness.
Signed-off-by: Ryan Houdek <Sonicadvance1@gmail.com>
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Adds a large sum of TGSI opcodes to the a3xx compiler.
For integer opcodes we have 28 opcodes added.
Adds 4 floating point compare opcodes
If GLSL 1.30 is enabled, this allows the GLSL 1.30 piglits to have a
completion amount of 432/641.
Signed-off-by: Ryan Houdek <Sonicadvance1@gmail.com>
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Split out fd_query into an abstract base class, to allow multiple
implementations. The current sw based queries are moved into
fd_sw_query.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
We allocate dispatch tables for BeginEnd and OutsideBeginEnd. But
when we destroy the context we were freeing the BeginEnd and Exec
tables. If Exec==BeginEnd we did a double-free. This would happen
if the context was destroyed while inside a glBegin/End pair. Now
free the BeginEnd and OutsideBeginEnd pointers.
Cc: "10.1", "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit ef6b6658f9)
Fixes the valgrind report below and random crashes with piglit on radeonsi.
==30005== Conditional jump or move depends on uninitialised value(s)
==30005== at 0xB13584E: st_translate_program (st_glsl_to_tgsi.cpp:5100)
==30005== by 0xB14698B: st_translate_fragment_program (st_program.c:747)
==30005== by 0xB14777D: st_get_fp_variant (st_program.c:824)
==30005== by 0xB11219C: get_color_fp_variant (st_cb_drawpixels.c:1042)
==30005== by 0xB1131AE: st_DrawPixels (st_cb_drawpixels.c:1154)
==30005== by 0xAFF8806: _mesa_DrawPixels (drawpix.c:162)
==30005== by 0x4EB86DB: stub_glDrawPixels (generated_dispatch.c:6640)
==30005== by 0x4F1DF08: piglit_visualize_image (piglit-util-gl.c:1574)
==30005== by 0x40691D: draw_image_to_window_system_fb(int, bool) (draw-buffers-common.cpp:733)
==30005== by 0x406C8B: draw_reference_image(bool, bool) (draw-buffers-common.cpp:854)
==30005== by 0x40722A: piglit_display (alpha-to-coverage-dual-src-blend.cpp:117)
==30005== by 0x4EA7168: run_test (piglit_fbo_framework.c:52)
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
(cherry picked from commit 2bab95973d)
v2: Create the intel renderbuffer with level hardcoded to zero instead
of overriding it in the surface state configuration. Also moved the
dimension adjustments for tiling, mip level, msaa into the render
buffer creation. Finally prepares for another blit path needed for
miptree updownsampling.
v3 (Ken): Dropped unnecessary memory context for "ralloc_asprintf()"
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
(cherry picked from commit d1829badf5)
v2: Configure stencil directly for final dimensions instead of
adjusting bit by bit for tiling, mip level and msaa.
v3 (Ken): Used non-static constant for horizontal alignment
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 9d752c098c)
v2: Allow hardware to offset accesses to individual layers. Also leave
the mip-level overriding for the creator of the intel renderbuffer
to handle. Merged with "i965/gen8: Allow stencil buffers to be
configured as single sampled"
Ken: I left the "_mesa_problem()" still in place. I think it is clearer
to remove it in a separate patch.
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 36caae48b2)
v2: Use intel_mipmap_tree::total_width in order to get correct alignment
automatically. Also use "mt->total_height / mt->physical_depth0" as
surface height allowing hardware to offset to correct slice.
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 6aefaa4eb2)
mt->format is of type mesa_format, and therefore can't be
used with _mesa_base_fbo_format which requires a GLenum input.
On gen8, this fixes various piglit fbo-depthstencil tests with
samples > 1.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 103057b2b7)
Previously the code used the total number of ubos being declared in the
linked program (so the ubos of all shaders combined), use the number
from the particular shader instead.
This fixes an assertion failure with piglit arb_uniform_buffer_object-maxblocks
seen in llvmpipe since 8a9f5ecdb1 as it now emits
code for each declared buffer, not just the ones actually used.
CC: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 3e817e7e56)
We're moving towards requiring interface additions to be appended to the
end of the interface block. No functional change, opcodes are assigned as
before, but version 2 additions are now grouped together, which prevents
a scanner warning.
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
(cherry picked from commit 06842d436e)
The depth extent field is used to limit the allowed slice range that
can be rendered to.
With the previous setting, only slice 0 could be rendered.
This fixes piglit amd_vertex_shader_layer-layered-depth-texture-render.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
(cherry picked from commit c51c192891)
Fixes piglit's
'gl-3.2-layered-rendering-clear-color-all-types 3d mipmapped'
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
(cherry picked from commit e47d08adef)
If blorp is disabled for color clears, then piglit's
'gl-3.2-layered-rendering-clear-color-all-types 3d mipmapped'
will fail.
Currently, gen8 fails similarly on this test because gen8
does not use blorp.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
(cherry picked from commit b875f39e29)
Same issues as the previous commit fixed for Gen7:
- Bogus physical->logical layer conversion; depth/stencil surfaces
are still IMS layout on Gen8.
- mt_layer ignored in layered rendering case, which breaks handling
of views with MinLayer.
- Render target array extent not set correctly for arrays.
I'm not able to test this one since I can't get a Broadwell yet, but
it's the same set of fixes as for Gen7.
V2: Restore the MAX2() to account for zero depth/layer_count.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 23e9f06569)
Again, a few problems:
- Layered attachments did not honor MinLayer.
- Non-layered MSAA attachments rendered to the wrong layer due to
dividing by the layer count. All depth buffers use the IMS layout, so
the physical layer count == logical layer count.
- Layered attachments were not limited to irb->layer_count, so we could
render off the end of the texture.
V2: Restore the MAX2() to account for zero depth/layer_count.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 77d55ef481)
Fixing the same issues the previous commit does for Gen7.
Note that I can't test this one, since I don't have a Broadwell.
V2: Restore the MAX2() to account for zero depth/layer_count.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 9269ea599c)
There were a few problems here, which mostly just broke layered
rendering into a view:
- Render target view extent was always set to be == depth. This is
benign for non-layered-rendering, but allows writes off the end of the
render target for layered rendering, which ends badly.
- Layered rendering did not honor the mt_layer setting, so would not
properly handle MinLayer being set on a view.
V2: Restore the MAX2() to account for zero depth/layer_count.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit dd43900b7b)
Need to adjust coordinates since the shader receives the array index as
depth in z, but the TEX instruction expects it to be the second
coordinate for a 1D array texture. This fixes fbo-generatemipmap-array.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 8baed87212)
Previously the implication was that queries should be disabled during
blits. However glBlitFramebuffer() is supposed to obey the current
query, and this new bit will indicate that to the driver.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 752ce0affb)
Different textures may be bound to each slot for each stage. So we need
to be able to upload ms parameters for each one without stages
overwriting each other.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 863573b9cb)
The screen takes ownership of the winsys, and is responsible for
destroying it. Users of pipe-loader should make sure they destory
and screens they've created to avoid memory leaks.
This fixes a crash in clover introduced by
ce6c17c083 where the pipe-loader was
destroying the winsys while a screen was still using it.
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit c650033b86)
1c73e919a4 made it possible to not allocate
the tgsi machine if llvm was used. However, draw_get_option_use_llvm() is
not reliable after draw context creation, since drivers can explicitly
request a non-llvm draw context even if draw_get_option_use_llvm() would
return true (and softpipe does just that) which leads to crashes.
Thus use draw->llvm to determine if we're using llvm or not instead (and
make draw->llvm available even if HAVE_LLVM is false so we don't have to put
even more ifdefs).
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 9af68e9b1d)
In an earlier incarnation of populate_consumer_input_sets and
get_matching_input, the consumer_inputs_with_locations array was indexed
using the user-specified location. In that version, only user-defined
varyings were included in the array.
In the current incarnation, the Mesa location is used to index the
array, and built-in varyings are included.
This change fixes the unit test to exepect gl_ClipDistance in the array,
and it resizes the arrays to actually be big enough. It's just dumb
luck that the existing piglit tests use small enough locations to not
stomp the stack. :(
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78258
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Cc: Vinson Lee <vlee@freedesktop.org>
(cherry picked from commit f7bf37cb13)
This path is used to implement both glClear and glClearBuffer; the
latter is only supposed to clear particular buffers. Core Mesa provides
us that information in the buffers bitmask; we must only clear buffers
mentioned there.
To accomplish this, we save/restore the color draw buffers state, and
use glDrawBuffers to restrict drawing to the relevant buffers.
Fixes Piglit's spec/!OpenGL 3.0/clearbuffer-mixed-formats and
spec/ARB_framebuffer_object/fbo-drawbuffers-none glClearBuffer tests
for drivers using meta clears (such as Broadwell).
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77852
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77856
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 9701c6984d)
This will be used for saving/restoring the glDrawBuffers state.
For now, make sure that existing users of MESA_META_ALL don't get
the new bit, since they probably won't want it.
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit e526ebf35c)
The majority of _mesa_meta_Clear and _mesa_meta_glsl_Clear was the same;
adding a boolean for whether to use GLSL allows us to share most of it
without polluting either path too much.
Tested for regressions by hacking i965 to always use the non-GLSL path.
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 7c8df60f31)
Fixes glean/texture_srgb, which hit recursive-flush prevention
assertions in vbo_exec_FlushVertices.
This probably hurts the performance of front buffer rendering, but
very few people in their right mind do front buffer rendering.
Fixes Glean's texture_srgb test.
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit cde8bad1c9)
Prior to commit 8435b60a35, the region
equivalent of this function called intel_miptree_create_layout, which
set mt->target to target. With that commit, it no longer copied target.
Piglit's ext_image_dma_buf_import-sample_[xa]rgb8888 tests would then
hit an assertion failure, where image->TexObject->Target was
GL_TEXTURE_EXTERNAL_OES, and mt->target was GL_TEXTURE_2D.
Copying the target fixes this assertion failure.
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 829cb0423d)
The two paths are really similar, and the extra conditionals will be
dwarfed by the cost of the actual upload.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Commit 30259856a8 moved the state packets to
table generation time, but forgot to make this change. Apparently the
performance win there was about not reemitting the table pointers on
unrelated state changes.
No performance difference on cairo on glamor (n=118).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Now that we have the stage state coming into our setup of sampler states,
it's easy to drop an identifier into it of which stage the stage_state is,
and then look up which packet to emit in a little table.
No performance difference on cairo on glamor (n=492).
v2: Don't forget to do the workaround flush on IVB.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This should have happend around the time of commit 4680d23, but Keith's
DRI3 patches and my GLX_MESA_query_renderer patches crossed in the mail.
I don't have a working DRI3 setup, so I haven't been able to actually
verify this. I'm hoping that someone can piglit this for me on DRI3...
It's also unfortunate the DRI2 and DRI3 can't share more code.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: Keith Packard <keithp@keithp.com>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Use the ones provided by the compiler instead.
NOTE: External trees should be updated to not include '#include/c99'
directory directly, but rather rely on scons/gallium.py to do the right
thing.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Silence insignificant warnings so significant warnings have a chance to
stand out.
The only abundant warning that's not silenced here is "C4018:
signed/unsigned mismatch", as it could hide security issues, so it's better
to actually fix the code.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Drop the version/name tag from the script as it was never
meant to be there. Add swrast_create_screen as it is used
when loading swrast. Rename the file to pipe.sym.
v2: Rebase on top of the LD_NO_UNDEFINED changes.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Both llvm and clang polute the exported symbol table, as soon
as we try to link with either one. Other than those two
everything else looks good (clean).
Cc: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Namely drop the version/name tag of the exported symbol, and
rename the filename to egl.sym.
v2: Rebase on top of the LD_NO_UNDEFINED changes.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Using export-symbols-regex is the least desirable method of restricting
the exported symbols, as is completely messes up with the symbol table.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Using export-symbols-regex is the least desirable method of restricting
the exported symbols, as is completely messes up with the symbol table.
radeon_drm_winsys_create is not needed, avoid exporting it.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
In the presence of LLVM the final library exports every symbol from
the llvm namespace. Resolve this by using a version script (w/o the
version/name tag).
Considering that there are only ~25 symbols, explicitly list them
to minimize the chances of rogue symbols sneaking in.
Drop the *winsys_create functions as they were only meant for
gl-vdpau interop.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
The symbol is not meant to be exported, and its presence was
only a side effect due to the missing visibility flags.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The symbol is used for hardware only drivers. For swrast the
loader uses swrast_create_screen. Add VISIBILITY_CFLAGS while
we're here.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
This can be called from locations that don't have a context pointer
handy. This patch also adds enough infrastructure so that the unit
tests for the GLSL compiler and the stand-alone compiler will build and
function.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
This allows them to be moved to .rodata, and allow us to be sure that they
will not be modified.
Signed-off-by: Chia-I Wu <olv@lunarg.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <t_arceri@yahoo.com.au>
Using the existing driver hooks made for AMD_performance_monitor, implement
INTEL_performance_query functions.
v2: Whitespace changes.
v3: Whitespace changes, add a _mesa_warning()
Signed-off-by: Petri Latvala <petri.latvala@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Like AMD_performance_monitor, this extension provides an interface for
applications (and OpenGL-based tools) to access GPU performance
counters. Since the exact performance counters available vary between
vendors and hardware generations, the extension provides an API the
application can use to get the names, types, and minimum/maximum
values of all available counters.
Applications create performance queries based on available query
types, and begin/end measurement collection. Multiple queries can be
measuring simultaneously.
v2: Whitespace changes
v3: src/mapi/glapi/gen/gl_API.xml: Also expose the functions to GLES2.
v4: Whitespace changes, static_dispatch="false" for all functions, fix
dispatch_sanity test for GLES2 functions
Signed-off-by: Petri Latvala <petri.latvala@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This was a work-around to allow linking a program with only a fragment
shader in a GLES context. Now that we have GL_EXT_separate_shader_objects
in GLES contexts, we can just use that.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
ARB, OES, then everything else. If there's ever a KHR shading language
extension, it should go between ARB and OES.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Acked-by: Eric Anholt <eric@anholt.net>
I don't know of any applications that actually use it. Now that Mesa
supports GL_ARB_separate_shader_objects in all drivers, this extension
is just cruft.
The entrypoints for the extension remain in the XML. This is done so
that a new libGL will continue to provide dispatch support for old
drivers that try to expose this extension.
Future patches will add OpenGL ES GL_EXT_separate_shader_objects, but
that's a different thing.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
With this patch, the piglit arb_separate_shader_object-dlist test
passes.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This will be used for GL_ARB_separate_shader_objects. That extension
not only allows separable shaders to rendezvous by location, but it also
allows traditionally linked shaders to rendezvous by location. The spec
says:
36. How does the behavior of input/output interface matching differ
between separable programs and non-separable programs?
RESOLVED: The rules for matching individual variables or block
members between stages are identical for separable and
non-separable programs, with one exception -- matching variables
of different type with the same location, as discussed in issue
34, applies only to separable programs.
However, the ability to enforce matching requirements differs
between program types. In non-separable programs, both sides of
an interface are contained in the same linked program. In this
case, if the linker detects a mismatch, it will generate a link
error.
v2: Make sure consumer_inputs_with_locations is initialized when
consumer is NULL. Noticed by Chia-I.
v3: Rebase on removal of ir_variable::user_location.
v4: Replace a (stale) FINISHME with some good explanation comments from
Eric.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
When linking a separable program that contains only a fragment shader,
the producer will be NULL. Similar cases will exist with geometry
shaders and, eventually, tessellation shaders.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
While writing the link_varyings::single_interface_input test, I
discovered that populate_consumer_input_sets assumes that all shader
interface blocks have been lowered to discrete variables. Since there
is a pass that does this, it is a reasonable assumption. It was,
however, non-obvious. Make the code fail when it encounters such a
thing, and add a test to verify that behavior.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Four initial tests:
* Create an IR list with a single input variable and verify that
variable is the only thing in the hash tables.
* Same as the previous test, but use a built-in variable
(gl_ClipDistance) with an explicit location set.
* Create an IR list with a single input variable from an interface block
and verify that variable is the only thing in the hash tables.
* Create an IR list with a single input variable and a single input
variable from an interface block. Verify that each is the only thing
in the proper hash tables.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
I want to make some changes to this code, but first I want to make some
unit tests for it... so that I can capture the pre- and
post-invariants. Pulling the code out into its own function in a
non-anonymous namespace enables that.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This code was broken in some odd ways before. Too much state was being
saved, it was being restored in the wrong order, and in the wrong way.
The biggest problem was that the pipeline object was restored before
restoring the programs attached to the default pipeline.
Fixes a regression in the glean texgen test.
v3: Fairly significant re-write. I think it's much cleaner now, and it
avoids a bug with some meta ops that use shaders (reported by Chia-I).
v4: Check Pipeline.Current against NULL instead of Pipeline.Default.
Suggested by Chia-I.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chia-I Wu <olv@lunarg.com>
Pull most of the guts out of _mesa_BindPipeline into a new utility
function that can be use elsewhere (e.g., meta).
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Don't do anything with variables that have explicitly assigned
locations. This is also how built-in varyings are handled.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
In February 2013 Paul unified the values used for shader stage outputs
and shader stage inputs. See commits 8a076c5f0^..eed6baf76. Since that
time, the location_base parameters are always VARYING_SLOT_VAR0.
Instead of passing that around, just hard code it.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Now that we are uisng the OpenCL 1.2 headers, applications expect all
the OpenCL 1.2 functions to be implemented.
This fixes linking errors with the piglit CL tests.
v2:
- Use c++ features
- Fix error code handling
v3:
- Move <iostream> into api/util.hpp
- Fix indentation
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Make set_ubo_binding() just update the binding, and move the code
that does validation, flushes the vertices etc. into a new
bind_uniform_buffer() function.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
v2: Document the difference between _mesa_lookup_bufferobj() and
_mesa_multi_bind_lookup_bufferobj().
v3: Don't create the buffer objects when they don't exist.
Reviewed-by: Brian Paul <brianp@vmware.com> (v2)
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> (v2)
Make set_atomic_buffer_binding() just update the binding, and move
the code that does validation, flushes the vertices etc. into a new
bind_atomic_buffer() function.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This is for glBindTextures(), since it doesn't change the active
texture unit.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This patch adds functions for locking/unlocking the mutex, along with
_mesa_HashLookupLocked() and _mesa_HashInsertLocked()
that do lookups and insertions without locking the mutex.
These functions will be used by the ARB_multi_bind entry points to
avoid locking/unlocking the mutex for each binding point.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The texture can only be bound to the index that corresponds to its
target, so there is no need to loop over all possible indices
for every unit and checking if the texture is bound to it.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This will be used by glBindTextures() when unbinding textures,
to avoid having to loop over all the targets.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This will be used by glBindTextures() so we don't have to look it up
for each texture.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
We had the EGLimage structure laying around in intel_regions.h, but now
it's the only thing left in the file.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
v2: Fix bad pointer on unreference (caught by Chad)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
I slipped this in in the region->pitch change from pixels to bytes, but I
don't see any reason for it any more -- the libdrm code doesn't appear to
divide pitch by a cpp.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
If the stride wasn't width*cpp, we wouldn't track how much of the src is
busy, and allow a subdata into the end to proceed unsynchronized.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Note: region->width/height used to reflect the total_width/height padding
of separate stencil, though mt->total_width didn't. region->width/height
was being used in EGL images, where the padded value would have been the
wrong one, so I converted them to use rb->Width/Height.
v2: Drop debug printf that slipped in (caught by Ken)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Regions aren't refcounted safely for multithreaded applications, and
they're not terribly useful wrappers of a BO, so I'm trying to remove
them.
Even the stride I added here could probably be reduced to use of an
existing field in the __DRIimageRec, but I want this to be as mechanical
of a change as possible.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
I want to do this to get the region removed from DRI images. However, it
does mean that we won't share the intel_region between the rb and the
texture for texture_from_pixmap. I think that's fine.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
I noticed that we were doing this while changing the DRI3 path to not use
regions, which involved changing the signature of
intel_update_winsys_renderbuffer_miptree() this way.
v2: Replace my comment with Chad's version.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v1)
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net> (v1)
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
The drm function to get the tiling is just a getter storing the two
pointers, so we don't need to go out of our way to avoid it.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
All the consumers are doing it on a miptree.
v2: fix a silly duplicated dereference (review by Ken)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net> (v1)
Reviewed-by: Chad Versace <chad.versace@linux.intel.com> (v1)
intel_alloc_renderbuffer_storage() will clobber rb->Format which was
already set up by intel_create_renderbuffer(). This causes the driver
to potentially create the depth buffer in the wrong format.
In practice this makes the depth buffer Z24 even if the visual has
depthBits==16.
The incorrect depth buffer format doesn't seem to cause any actual
problems in i965, but it seems like we should fix it anyway. I see
Z16 has been more or less deprecated in the driver except the for
the depthBits==16 case. But if we want to use Z24 even in that
case (not sure it's really legal?) it would look better if the
code made that decision explicitly rather than relying on the
format to get magically overwritten by the renderbuffer code.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
intel_alloc_renderbuffer_storage() will clobber rb->Format which was
already set up by intel_create_renderbuffer(). This causes the driver
to potentially create the depth buffer in the wrong format.
Long time ago things worked by accident because
_mesa_choose_tex_format() checked for ARB_depth_texture
and thus returned MESA_FORMAT_NONE on gen2 hardware. Somehow
that ended up working when depthBits==16 because the driver
would then pick DEPTH_FRMT_16_FIXED. Not sure how, but things
also seemed to work with depthBits==24.
Things started to go more sideways at:
commit 6ae473221a
Author: Eric Anholt <eric@anholt.net>
Date: Mon Apr 22 16:04:25 2013 -0700
intel: Fold the one last function intel_tex_format.c into the caller.
since that caused intel_miptree_create_layout() to divide by zero
when encoutering MESA_FORMAT_NONE (bw==0). So after this
commit things were broken enough that many applications wouldn't even
run.
Things got a bit better at:
commit c245efe7e8
Author: Eric Anholt <eric@anholt.net>
Date: Thu Mar 21 09:50:45 2013 -0700
mesa: Remove extension checking from ChooseTexFormat.
since now _mesa_choose_tex_format() would return MESA_FORMAT_X8_Z24
for GL_DEPTH_COMPONENT due to i915 erroneosly claiming that
MESA_FORMAT_X8_S24 (and others) are supported texture formats even
on gen2 hardware. So now the the div-by-zero was gone, but now the
driver would pick DEPTH_FRMT_24_FIXED_8_OTHER even when
depthBits==16 which caused rendering problems.
If we prevent rb->Format from getting clobbered for the depth buffer
things work much better. This makes the spinning title text visible
again in chromium-bsu at 16bpp, for example.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
V2: Follow the new naming convention for unpack functions.
Use double precision for converting Z24 to a float.
V3: Unpack stencil value to most significant byte.
Use 'struct z32f_x24s8' type.
V4: Unpack stencil value to least significant byte.
Add a comment to clarify stencil packing.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This patch contains non-functional changes. Assertion checks made
earlier in the functions make the if checks redundant. So, remove
the if checks and unindent the code in if block.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Depth-stencil teture targets are allowed to use source data of type
GL_UNSIGNED_INT_24_8_EXT and GL_FLOAT_32_UNSIGNED_INT_24_8_REV.
Fixes few crashes in Khronos OpenGL CTS packed_pixels tests.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Link error conditions added in previous patch are equally applicable
to GL_ARB_fragment_coord_conventions implementation. Extension's spec
says:
"If gl_FragCoord is redeclared in any fragment shader in a program,
it must be redeclared in all the fragment shaders in that program
that have a static use of gl_FragCoord. All redeclarations of
gl_FragCoord in all fragment shaders in a single program must have
the same set of qualifiers."
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
GLSL 1.50 spec says:
"If gl_FragCoord is redeclared in any fragment shader in a program,
it must be redeclared in all the fragment shaders in that
program that have a static use gl_FragCoord. All redeclarations of
gl_FragCoord in all fragment shaders in a single program must
have the same set of qualifiers."
This patch causes the shader link to fail if we have multiple fragment
shaders with conflicting layout qualifiers for gl_FragCoord.
V2: Restructure the code and add conditions to correctly handle the
following case:
fragment shader 1:
layout(origin_upper_left) in vec4 gl_FragCoord;
void main()
{
foo();
gl_FragColor = gl_FragData;
}
fragment shader 2:
layout(pixel_center_integer) in vec4 gl_FragCoord;
void foo()
{
}
V3:
Allow linking in the following case:
fragment shader 1:
void main()
{
foo();
gl_FragColor = gl_FragCoord;
}
fragment shader 2:
in vec4 gl_FragCoord;
void foo()
{
...
}
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Section 4.3.8.1, page 39 of GLSL 1.50 spec says:
"Within any shader, the first redeclarations of gl_FragCoord
must appear before any use of gl_FragCoord."
GLSL compiler should generate an error in following case:
vec4 p = gl_FragCoord;
layout(origin_upper_left) in vec4 gl_FragCoord;
void main()
{
}
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
GLSL 1.50 spec says:
"If gl_FragCoord is redeclared in any fragment shader in a program,
it must be redeclared in all the fragment shaders in that
program that have a static use gl_FragCoord. All redeclarations of
gl_FragCoord in all fragment shaders in a single program must
have the same set of qualifiers."
This patch makes the glsl compiler to generate an error if we have a
fragment shader defined with conflicting layout qualifier declarations
for gl_FragCoord. For example:
layout(origin_upper_left, pixel_center_integer) in vec4 gl_FragCoord;
layout(pixel_center_integer) in vec4 gl_FragCoord;
void main()
{
}
V2: Some code refactoring for better readability.
Add compiler error conditions for redeclarations like:
layout(origin_upper_left) in vec4 gl_FragCoord;
layout(origin_upper_left, pixel_center_integer) in vec4 gl_FragCoord;
and
in vec4 gl_FragCoord;
layout(origin_upper_left, pixel_center_integer) in vec4 gl_FragCoord;
V3: Simplify function is_conflicting_fragcoord_redeclaration()
V4: Check for null pointer before doing strcmp(var->name, "gl_FragCoord").
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
In OpenGL 3.1 attribute 0 becomes non-magic, just like in
OpenGL ES 2.0. Earlier versions of OpenGL used attribute 0
exclusively for vertex position.
V2: Add a utility function _mesa_attr_zero_aliases_vertex() in
varray.h
Fixes 4 Khronos OpenGL CTS failures:
glGetVertexAttrib
depth24_basic
depth24_precision
rgb8_rgba8_rgb
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This patch makes changes to the behavior of glGetAttribLocation(),
glGetFragDataLocation() and glGetFragDataIndex() functions.
Code changes handle a case described in following example:
shader program:
layout(location = 1)in vec4[4] a;
void main()
{
}
Currently, glGetAttribLocation("a") returns 1.
glGetAttribLocation("a[i]"), where i = {0, 1, 2, 3}, returns -1.
But the expected locations for array elements are: 1, 2, 3 and 4
respectively.
This clarification came up with the addition of
ARB_program_interface_query to OpenGL 4.3.
From Page 326 (page 347 of the PDF) of OpenGL 4.3 spec:
"Otherwise, the command is equivalent to
GetProgramResourceLocation(program, PROGRAM_INPUT, name);"
And, From Page 101 (page 122 of the PDF) of OpenGL 4.3 spec:
"A string provided to GetProgramResourceLocation or
GetProgramResourceLocationIndex is considered to match an active
variable if
• the string exactly matches the name of the active variable;
• if the string identifies the base name of an active array, where
the string would exactly match the name of the variable if the
suffix "[0]" were appended to the string; or
• if the string identifies an active element of the array, where
the string ends with the concatenation of the "[" character, an
integer (with no "+" sign, extra leading zeroes, or whitespace)
identifying an array element, and the "]" character, the integer
is less than the number of active elements of the array variable,
and where the string would exactly match the enumerated name of
the array if the decimal integer were replaced with zero."
V2: Simplify get_matching_index() function.
Add relevant text from OpenGL spec in commit message.
Fixes failures in Khronos OpenGL CTS tests:
explicit_attrib_location_room
draw_instanced_max_vertex_attribs
Proprietary linux drivers of NVIDIA (331.49) matches the behavior
expected by OpenGL 4.3 spec.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Currently overlapping locations of input variables are not allowed for all
the shader types in OpenGL and OpenGL ES.
From OpenGL ES 3.0 spec, page 56:
"Binding more than one attribute name to the same location is referred
to as aliasing, and is not permitted in OpenGL ES Shading Language
3.00 vertex shaders. LinkProgram will fail when this condition exists.
However, aliasing is possible in OpenGL ES Shading Language 1.00 vertex
shaders."
Taking in to account what different versions of OpenGL and OpenGL ES specs
say about aliasing:
- It is allowed only on vertex shader input attributes in OpenGL (2.0 and
above) and OpenGL ES 2.0.
- It is explictly disallowed in OpenGL ES 3.0.
Fixes Khronos CTS failing test:
explicit_attrib_location_vertex_input_aliased.test
See more details about this at below mentioned khronos bug.
V2: Fix the case where location exceeds the maximum allowed attribute
location.
V3: Simplify the condition added in V2.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Cc: "9.2 10.0 10.1" <mesa-stable@lists.freedesktop.org>
Bugzilla: Khronos #9609
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
don't leak the MCSubtargetInfo (not really big, was already fixed with
llvm master) and TargetMachine (big). While this is only used for debugging
the leak is large enough to get you into trouble in some cases.
Tested with llvm 3.1 and master.
Before (llvm 3.1), GALLIVM_DEBUG=asm glxgears:
==14152== LEAK SUMMARY:
==14152== definitely lost: 105,228 bytes in 20 blocks
==14152== indirectly lost: 347,252 bytes in 261 blocks
==14152== possibly lost: 866,625 bytes in 1,453 blocks
==14152== still reachable: 7,344,677 bytes in 6,494 blocks
==14152== suppressed: 0 bytes in 0 blocks
After:
==13799== LEAK SUMMARY:
==13799== definitely lost: 3,108 bytes in 6 blocks
==13799== indirectly lost: 0 bytes in 0 blocks
==13799== possibly lost: 804,143 bytes in 1,429 blocks
==13799== still reachable: 7,314,267 bytes in 6,473 blocks
==13799== suppressed: 0 bytes in 0 blocks
Reviewed-by: Brian Paul <brianp@vmware.com>
The brw_eu_emit.c code manually forces the header present bit when
used in align1 (scalar) mode. So, this has no effect currently.
However, it is nice to have fs_inst::header_present reflect reality.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77221
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
This is similar to what Eric did for Gen7 a little while ago; it also
has support for untyped surface reads.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Francisco made brw_mark_surface_used a freestanding function in
commit a32817f3c2. We should use it.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
This must not have existed when I wrote the original code. The atomic
operation header setup code uses this.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
For platforms using hardware contexts (currently Gen6+), we failed to
emit PIPELINE_SELECT and 3DSTATE_VF_STATISTICS, instead emitting MI_NOOP
for both.
During one of the context initialization reordering patches, we
accidentally moved brw_init_state before we set brw->CMD_PIPELINE_SELECT
and brw->CMD_VF_STATISTICS. So, when brw_init_state uploaded initial
GPU state (brw_init_state -> brw_upload_initial_gpu_state ->
brw_upload_invariant_state), these would be 0 (MI_NOOP).
Storing the commands in the context is not worthwhile. We have many
generation checks in our state upload code, and for platforms with
hardware contexts, this only gets called once per GL context anyway.
The cost is negligable, and it's easy to botch context creation
ordering.
This may fix hangs on Gen6+ when using the media pipeline.
Cc: "10.0 10.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
arekm reported that using Chrome with GPU acceleration enabled on GM45
triggered the hw_ctx != NULL assertion in brw_get_graphics_reset_status.
We definitely do not want to advertise reset notification support on
Gen4-5 systems, since it needs hardware contexts, and we never even
request a hardware context on those systems.
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75723
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
This was introduced with the comment and code below it, though the code
only touches prog_data (CACHE_NEW_WM_PROG).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This keeps us from having to emit the nonpipelined state packet on every
FBO binding.
-4.42003% +/- 1.09961% effect on cairo-perf-trace runtime on glamor (n=110).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
No more walking 96*6 pointers looking to see if they're the current
texture, when we only use the first 2 out of 96 units. -6.26002% +/-
1.87817% effect on cairo runtime on no-fbo-cache glamor (n=36).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Instead of walking 6 shader stages for each of the 96 combined texture
image units, now we just walk the samplers used in each shader stage.
With cairo-perf-trace on Xephyr with glamor, I'm seeing a -6.50518% +/-
2.55601% effect on runtime (n=22) since the "drop _EnabledUnits" change.
No significant performance difference on an apitrace of minecraft (n=442).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
I want to avoid walking the entire long array texture image units, but the
obvious way to do so means walking program samplers, and thus hitting the
units in a random order.
This change replaces the previous behavior of only setting up the fallback
texture for a fragment shader with setting up the fallback texture for any
shader that's missing a complete texture of the right target in its unit.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This is kind of ugly, but I think it's worth it to finish off the last
consumers of _ReallyEnabled.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The _MaxEnabledTexImageUnit check assures us that Unit[0].Current != NULL.
This is the last consumer of _ReallyEnabled outside of the radeons.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
I'm probably not the only person that has tried to kill _ReallyEnabled.
This does the mechanical part of the work, and cleans _ReallyEnabled from
i965.
I think that using _Current makes texture management clearer: You can't
have multiple targets in use in the same texture image unit at the same
time, because there's just that one pointer.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
I'm going to try to delete _ReallyEnabled, which is this weird bitfield
with either 0 or 1 bits set with just the reference to _Current.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The field wasn't really valid, since we've got more than 32 units now. It
turns out it was mostly just used for checking != 0, or checking for fixed
function coordinates, though.
v2: Fix mis-conversion in xm_line.c (caught by Ken).
Reviewed-by: Matt Turner <mattst88@gmail.com> (v1)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
_EnabledUnits is all of the first 32 image units that are used by fixed
function or programs, while _EnabledCoordUnits is just which fixed function
fragment shader texcoords need to be generated. This is a theoretical bugfix
in the case of a vertex shader texturing from large texture image unit number
(we'd end up flagging something other than a VARYING_SLOT_TEXn as needing to
be generated), but it's actually just motivated by trying to kill
_EnabledUnits.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The original GL_EXT_texture_swizzle extensions said GL_INVALID_OPERATION
was to be generated when the an invalid swizzle was passed to
glTexParameter(). But in OpenGL 3.3 and later, the error should be
GL_INVALID_ENUM.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
It is possible that there are multiple input buffers but only one is
relevant for translation. Then there will be only a single translation
group, which might need to source data from a buffer index != 0.
Fixes wrong vertex shader inputs as observed while debugging with an
application and driver combination that requires translation of a
vertex attribute in a non-trivial set of attributes and input buffers.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Igor Gnatenko:
v2: PIPE_COMPUTE_CAP_MAX_CLOCK_FREQUENCY instead of
PIPE_COMPUTE_MAX_CLOCK_FREQUENCY
Bruno Jiménez:
v3: Drivers report clock in Mhz
Signed-off-by: Igor Gnatenko <i.gnatenko.brain@gmail.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Igor Gnatenko:
v2: in define RADEON_INFO_MAX_SCLK use 0x1a instead of 0x19 (upstream changes)
Bruno Jiménez:
v3: Convert the frequency to MHz from kHz after getting it in
'do_winsys_init'
Signed-off-by: Igor Gnatenko <i.gnatenko.brain@gmail.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
We intended to set these 64-bit addresses to 0, and set the enable bit.
But, I accidentally placed the DWord with the high bits first, when it
should have been second.
This generally worked out, by luck - presumably General State Base
Address is initially zero, and ends up remaining that way in our
contexts since we bungled the "modify enable" bit.
v2: Fix MOCS shift on GSBA. It should be 4, and I had 2.
(Caught by Ben Widawsky.)
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
The implementation is basically a NOP but it conforms with OpenCL 1.2.
[ Francisco Jerez: Initialize property return buffer for
CL_DEVICE_PARTITION_PROPERTIES, CL_DEVICE_PARTITION_TYPE,
CL_DEVICE_PARTITION_AFFINITY_DOMAIN, and make the latter a scalar
rather than a vector. Some clean-up and code style fixes. ]
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
v2: use a new variable for aligned size
add comment
make both vars const
only use the aligned value in argument constructors
fix comment typo
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
The C++ headers are *not* updated because they rely on CL 1.2 APIs
that we do not implement yet when the core CL 1.2 headers are present.
Acked-by: Tom Stellard <thomas.stellard@amd.com>
Fixes textureGatherOffset when used with a shadow sampler. Also verified
against blob compiler with textureLodOffset manually (no piglit tests
for texture[Lod]Offset + shadow samplers).
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
This adds support for:
IBFE, UBFE, BFI, LSB, IMSB, UMSB, BREV, POPC
Which are all required for ARB_gs5 support.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Add bitwise reversing and signed MSB helpers for software implementation
of the new TGSI opcodes.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Also pipe through [IU]MUL_HI, MAD, and lower ldexp. This provides
coverage of all new ARB_gpu_shader5 functions except uaddCarry,
usubBorrow and interpolateAt*.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Use designated initialisers, and store the extensions pointers as const.
The loader extensions __DRIdri2LoaderExtension and __DRIswrastLoaderExtension
are setup by the platform backends so they should not be constified.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Use designated initialisers, store all extension pointers as const and use
a const __DRIextensions array over assigning each element individually.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Explicitly set the version that is implemented, as that may differ from
the one defined in dri_interface.h. The remaining __DRI*Extensions are
treated as constants, so got ahead and declare them as such.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Use a const array with the extensions, rather than assigning each
one to a fixed size array at runtime.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Make sure that the DRI*Extensions report the version of the interface
implemented over the listed in the headers. While both are currently
the same, this may change in the future.
v2: Keep loader extensions handling as is.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> (v1)
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Explicitly set the version that is implemented, as that may differ
from the one defined in dri_interface.h. Use designated initialisers
and constify whereever possible.
Note: __DRIimageExtension should not be made const as it's modified
at runtime. This patch should have no side effects on compilers that
do not support designated initialisers, as the existing code in
dri/common already uses them.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Rather than keeping a separate and unused copy of the screen extensions
within the radeon screen, use a constant array that can be used directly
with __DRIscreen.
[Kristian Høgsberg]
The copy in the radeon screen isn't unused, that's where the array is
built and stored, the dri screen just points to that. The pattern
here was used for cases where the extensions exported by a dri driver
could vary at runtime, for example depending on chipset. In this
case, it's known at compile time, so it makes sense to use a static
const array instead.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Uniformly use the typecasted extension name, constify extension instances
and use designated initialisers. Set the implemented version of the
extension, over the one defined in dri_infertace.h. Patch covers the
following extensions:
__DRItexBufferExtension
__DRIimageExtension
__DRIrobustnessExtension
__DRI2rendererQueryExtension
__DRIdri2LoaderExtension
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
With commit e59fa4c46c8("dri2: release texture image.") we updated the
extension without bumping the version number. The patch itself added an
interface required to enable texture_from_pixmap on certain platforms.
The new code was effectively never build, as it depended on
__DRI_TEX_BUFFER_VERSION >= 3, which never came to be in upstream mesa.
This commit bumps the version number, drops the __DRI_TEX_BUFFER_VERSION
checks and resolves all the build conflicts. Additionally it add a version
check as egl and dri3, as require version 2 of the extension which does
not have the releaseTexBuffer hook.
Cc: Juan Zhao <juan.j.zhao@intel.com>
Cc: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Unfortunately, Cygwin defines RTLD_DEFAULT (for glibc compatibility), but can't
provide dladdr(), so add a check for dladdr()
Since I don't think scons is ever used to build for Cygwin, just set HAVE_DLADDR
in SConscript, assuming that if we have RTLD_DEFAULT, we have dladdr().
Cc: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
The old python code used sys.is_big_endian to select between little-endian
and big-endian formats, which meant that the build and host endiannesses
needed to be the same. This patch instead generates both big- and little-
endian layouts, using PIPE_ARCH_BIG_ENDIAN to select between them.
Signed-off-by: Richard Sandiford <rsandifo@linux.vnet.ibm.com>
Signed-off-by: José Fonseca <jfonseca@vmware.com>
Splits out the code that parses the channel list, so that we
can have different lists for little and big endian.
There is no change to the generated u_format_table.c.
Signed-off-by: Richard Sandiford <rsandifo@linux.vnet.ibm.com>
Signed-off-by: José Fonseca <jfonseca@vmware.com>
Rather than iterate over format.channels and format.swizzles directly,
use Python subfunctions that take the channel and swizzle lists as
arguments. This allow the channel and swizzle lists to depend on
endianness.
There is no change to the generated u_format_table.c.
Signed-off-by: Richard Sandiford <rsandifo@linux.vnet.ibm.com>
Signed-off-by: José Fonseca <jfonseca@vmware.com>
With the big-endian changes, there can be two swizzle orders for each format.
This patch turns Format.inv_swizzle() into a global function that takes the
swizzle list as a parameter.
There is no change to the generated u_format_table.c.
Signed-off-by: Richard Sandiford <rsandifo@linux.vnet.ibm.com>
Signed-off-by: José Fonseca <jfonseca@vmware.com>
The main aim is to reduce the number of places that access channels[0],
swizzles[0] and swizzles[1] directly.
There is no change to the generated u_format_table.c.
Signed-off-by: Richard Sandiford <rsandifo@linux.vnet.ibm.com>
Signed-off-by: José Fonseca <jfonseca@vmware.com>
This can happen with glamor, which uses EGL_KHR_surfaceless_context and
only explicitly binds GL_READ_FRAMEBUFFER for glReadPixels.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Brian Paul <brianp@vmware.com>
relnotes weren't updated this whole time, so I went through all the
GL3.txt changes and picked out the nouveau ones since 10.1.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
_mesa_HashTable is not well-suited for us: it locks a mutex unnecessarily and
it does not accept 0 as the key (and have branches to handle 1 specially).
What we really need is a sparse array. Whether it should be implemented as a
hash table, a list, or a bsearch()-able array requires investigations of the
use models.
We choose to implement it as a list for now, assuming it is common to have a
short list of IDs in each (source, type) namespace. The code is simpler, and
the memory footprint is lower. This also fixes several corner cases such as
making messages to have different states at different severities.
v2: use GLbitfield for State/DefaultState, and add a comment
Signed-off-by: Chia-I Wu <olv@lunarg.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Do not copy the debug group until it is about to be written. One likely
scenario of using glPushDebugGroup/glPopDebugGroup is to enclose a sequence of
GL commands and give them a human-readable description. There is no message
control change in this scenario, and thus no need to copy.
This also reduces the initial size of gl_debug_state from 306KB to 7KB.
Signed-off-by: Chia-I Wu <olv@lunarg.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Add functions to provide these operations on a struct gl_debug_namespace:
init(): initialize the namespace
copy(): copy all elements from one namespace to another
clear(): clear all elements (to free the memories)
set(): set the value of an element
set_all(): set the value of all elements
get(): get the value of an element
A debug namespace is like a sparse array. The length of the array is huge,
2^sizeof(GLuint), but most of the elements assume the same value sepcified by
set_all().
Signed-off-by: Chia-I Wu <olv@lunarg.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Add struct gl_debug_group to hold all namespaces of a debug group. Replace
the 3-dimensional array, Namespaces, in struct gl_debug_state by a
1-dimensional array of type struct gl_debug_groups.
Turn the 4-dimensional array, Defaults, in struct gl_debug_state to a
1-dimensional array in struct gl_debug_namespace.
Signed-off-by: Chia-I Wu <olv@lunarg.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Remove NextMsgLength, and move members of struct gl_debug_state that belong to
the message log to a new struct, gl_debug_log. Rename gl_debug_msg to
gl_debug_message.
Signed-off-by: Chia-I Wu <olv@lunarg.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
When GL_DEBUG_OUTPUT_SYNCHRONOUS is GL_TRUE, drivers are allowed to log debug
messages from other threads. That requires gl_debug_state to be protected by
a mutex, even when it is a context state. While we do not spawn threads in
Mesa yet, this commit makes it easier to do when we want to.
Since the definition of struct gl_debug_state is no longer needed by the rest
of the driver, move it to main/errors.c. This should make it even harder to
use the struct incorrectly.
v2: add comments for the accessors
Signed-off-by: Chia-I Wu <olv@lunarg.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Add validate_length, and call it together with log_msg directly instead of
message_insert. No functional change.
v2: make sure length is non-negative (i.e., known) before calling
validate_length, noted by Timothy Arceri
Signed-off-by: Chia-I Wu <olv@lunarg.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
In both call sites, it could be easily replaced by direct
debug_is_message_enabled calls. No functional change.
Signed-off-by: Chia-I Wu <olv@lunarg.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Merge control_app_messages with the only caller. Eliminate set_message_state
and control_messages too as they are unused. No functional change.
Signed-off-by: Chia-I Wu <olv@lunarg.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Replace free_errors_data by debug_clear_group. Add debug_pop_group and
debug_destroy for use in _mesa_PopDebugGroup and _mesa_free_errors_data
respectively. No funcitonal change.
Signed-off-by: Chia-I Wu <olv@lunarg.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Move group copying to debug_push_group. Save the group message before pushing
instead of after, since we will need it after popping. No functional change
otherwise.
Signed-off-by: Chia-I Wu <olv@lunarg.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Move most of the code to debug_set_message_enable_all. No functional change.
Signed-off-by: Chia-I Wu <olv@lunarg.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Move message fetching to debug_fetch_message and message deletion to
debug_delete_messages. No functional change.
Signed-off-by: Chia-I Wu <olv@lunarg.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Move message logging to debug_log_message. Replace store_message_details by
debug_message_store. No functional change.
Signed-off-by: Chia-I Wu <olv@lunarg.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Move message state update to debug_set_message_enable. No functional change.
Signed-off-by: Chia-I Wu <olv@lunarg.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Move the message filtering logic to debug_is_message_enabled. No functional
change.
Signed-off-by: Chia-I Wu <olv@lunarg.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Move gl_debug_state allocation to a new function, debug_create. No functional
change.
Signed-off-by: Chia-I Wu <olv@lunarg.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
bitfieldInsert takes scalar integers for its last two arguments. Since
bitfieldInsert is lowered on i965 to two instructions that have more
flexible arguments, I didn't notice when I wrote this.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
It looks like this bit of code is trying to disable the prime capability if
the driver doesn't support createImageFromFds. However the logic looks a bit
broken and what it would actually do is disable all other capabilities apart
from prime. This patch fixes it to actually disable prime.
Cc: "10.0" "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
This should give the caller some information of what called the error.
For the gbm_bo_import() case, for instance, it is possible to know if
the import is not supported or the error was caused by an invalid
parameter.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
In all fairness we allow the gallium tests to be build with --disable-dri
which will result in the approapriate winsys to not be build, thus the
build will fail.
./configure --disable-dri --with-gallium-drivers=svga --enable-gallium-tests
Cc: Brian Paul <brianp@vmware.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Rather than defining our own set of variables, use NEED_WINSYS_XLIB
and based on it include the sw/xlib winsys.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The function relies on the sw/dri winsys which is build only when --enable-dri
is set. Fixes build issues with the following config
./configure --disable-dri --with-gallium-drivers=svga --enable-xa
Issue can be reproduced with any hw gallium driver + st that uses the pipe-loader.
Cc: Brian Paul <brianp@vmware.com>
Reported-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
GL (3.0) allows you to clear individual color buffers in a fb. In fact
for fbs containing both int and float/normalized color buffers this is
required (because the clearing values are otherwise undefined if applied
to all buffers). The gallium interface was changed a while ago, but llvmpipe
ignored it (hence doing such individual clears always resulted in clearing
all buffers, plus some assorted asserts due to the mixed fbs).
So change the clear command to indicate the buffer to be cleared. Also, because
indicating the buffer to be cleared would have made lp_rast_arg_cmd larger
which is unacceptable (we're trying to shrink it some day) allocate the clear
value in the scene and just pass a pointer.
There's several advantages and disadvantages here:
+ clearing individual buffers works (we could also actually bin such clears now
if they'd come through clear_render_target() if the surface is in the current
fb, though we didn't do this before for the single rb case and still don't try).
+ since there's one clear per rb, we do the format conversion in setup rather
than per bin. Aside from the (drop in the ocean...) performance advantage this
means that clearing to very small values (that is, denormal when converted to
the format) should work for small float (fp16 etc.) formats, as the util code
couldn't handle it correctly before (because cpu denorms are disabled when
executing the bin commands, screwing up the magic conversion and flushing
the values to 0, though this was not verified).
- there's some overhead for traditional old-style clear-all MRT cases, since
there's one rast clear command per rb instead of one for all rbs.
This fixes https://bugs.freedesktop.org/show_bug.cgi?id=76976.
v2: get rid of the ugly manual memcpy stuff and just use union util_color.
This is 32 bytes instead of 16 but as the allocation is per scene we can live
with those additional 16 bytes (and the additional 128 bytes in the setup
context), which makes the code much more obvious. Suggested by Brian.
Reviewed-by: Brian Paul <brianp@vmware.com>
util_color often merely represents a collection of bytes, however it is
inconvenient if those bytes can only be accessed as floats/doubles for int
formats exceeding 32bits.
(Note that since rgba8 formats use one uint, not 4 bytes, hence the byte and
short member were left as is.)
The current version checking is wrongly refusing to create 3.3 contexts;
unsupported version are checked elsewhere; and the DRI path doesn't do
this sort of checking neither.
This enables piglit glsl 3.30 tests to run without skipping.
Reviewed-by: Brian Paul <brianp@vmware.com>
According to Roland all TGSI support is there in theory.
In practice there are a few piglit failures and crashes, as this hadn't
been tested before.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
The GLX_ARB_create_context_profile spec says:
"If version 3.1 is requested, the context returned may implement
any of the following versions:
* Version 3.1. The GL_ARB_compatibility extension may or may not
be implemented, as determined by the implementation.
* The core profile of version 3.2 or greater."
Mesa does not support GL_ARB_compatibility, and there are no plans to
ever support it, therefore the only chance to honour a 3.1 context is
through core profile, i.e, the 2nd alternative from the spec.
This change does that. And with it piglit tests that require 3.1
contexts no longer skip.
Assuming there is no objection with this change, src/glx/dri_common.c
and src/gallium/state_trackers/wgl/stw_context.c should also be updated
accordingly, given they have the same logic.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Lets make draw_get_option_use_llvm function available unconditionally
and use it to avoid useless allocations when LLVM paths are active.
TGSI machine is never used when we're using LLVM.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Fixes a segmentation fault in conform divzero.c test.
This happens when glTexImage(level, width=0, height=0) is called. We
don't allocate texture memory in that case so the ImageSlices array
was never allocated.
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
This prevents buffer overflow w/ llvmpipe when running piglit
bin/gl-3.2-layered-rendering-clear-color-all-types 1d_array single_level -fbo -auto
v2: Compute the framebuffer size as the minimum size, as pointed out by
Brian; compacted code; ran piglit quick test list (with no
regressions.)
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
In cases where varying fetches are optimized away (just pass-through in
vertex shader, but unused in fragment shader) we need to calculate the
correct TOTALATTROVS based on the actual number of varyings fetched,
otherwise lockup.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
HiZ operations make the depth/render caches out of sync with the sampler
caches. We need to arrange for a TC flush to happen before the target
buffer is used by the sampler. Calling brw_render_cache_set_add_bo
makes that happen.
On previous generations, brw_blorp_exec took care of flushing the
texture cache by calling intel_batchbuffer_emit_mi_flush after doing
any rendering. If we were to use the normal drawing path, then
brw_postdraw_set_buffers_need_resolve would handle this.
On Broadwell, we don't use BLORP, and we don't emit a rectangle
primitive via the normal drawing path. The 3DSTATE_WM_HZ_OP and
PIPE_CONTROL implicitly make drawing happen. So, none of our existing
code makes this flush happen - we need to do it directly.
Fixes 11 Piglit copyteximage subtests.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77223
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77226
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
The way cik_num_banks() was calculating the index only makes sense for
the CIK specific macrotile mode array. For SI, we need to use the tile
mode index directly.
This happened to work most of the time because most of the SI tiling
modes use the same number of banks.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Previously this was special-cased for VS and FS; it never got updated
when geometry shaders came along. Generalize using is_varying_var() so
this won't be broken again with tessellation.
Note that there are two copies of the logic for `invariant`: It can be
present as part of a new declaration, and also as a redeclaration of an
existing variable or block member.
Fixes the four new piglits:
spec/glsl-1.50/compiler/invariant-qualifier-*.geom
Note for stable: This won't quite pick cleanly due to whitespace and
state->target -> state->stage renames. Should be straightforward
adjustments though.
Cc: "10.0 10.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Section 4.3.1, page 220, of OpenGL 3.3 specification explains
the error conditions for glreadPixels():
"If the format is DEPTH_STENCIL, then values are taken from
both the depth buffer and the stencil buffer. If there is
no depth buffer or if there is no stencil buffer, then the
error INVALID_OPERATION occurs. If the type parameter is
not UNSIGNED_INT_24_8 or FLOAT_32_UNSIGNED_INT_24_8_REV,
then the error INVALID_ENUM occurs."
Fixes failing Khronos CTS test packed_depth_stencil_error.test
V2: Avoid code duplication
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
From the OpenGL 4.4 spec page 275:
"If pname is FRAMEBUFFER_ATTACHMENT_COMPONENT_TYPE, param will
contain the format of components of the specified attachment,
one of FLOAT, INT, UNSIGNED_INT, SIGNED_NORMALIZED, or
UNSIGNED_NORMALIZED for floating-point, signed integer,
unsigned integer, signed normalized fixedpoint, or unsigned
normalized fixed-point components respectively. If no data
storage or texture image has been specified for the attachment,
param will contain NONE. This query cannot be performed for a
combined depth+stencil attachment, since it does not have a
single format."
Fixes Khronos CTS test: packed_depth_stencil_parameters.test
Khronos Bug# 9170
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The '**used' pointer was pointing into the stObj->sampler_views array.
If 'free' was null, we'd realloc that array, thus making the 'used'
pointer invalid. This soon led to memory errors.
Just change the pointer to be '*used' so it points directly at the
pipe_sampler_view.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Avoid looping over 32/48/96 (!!) tex image units every draw, most of
which we don't care about.
Improves performance on everyone's favorite not-a-benchmark by 2.9% on
Haswell.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This gives us a better bound for some hot loops in the drivers than
MAX_COMBINED_TEXTURE_IMAGE_UNITS, which is ridiculously large on modern
hardware, and only getting worse as more shader stages are added.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Also rework things so that if someone were to add an opcode without
adjusting the values in these arrays, there will be a compilation error.
This fixes a few quadop-related piglit regressions since commit
d5faf8e786.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
We want to center the sample. The old code may have been correct given
the limited values of ms_x/y, but the new logic should be more
intuitive. Note that ms_x can only be 1/2 and ms_y can only be 0/1.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
The 2D engine should be usable in more cases, but this fixes MS blits
between textures with the same MS settings. Otherwise a single sample is
selected to be the target texel value.
This allows other tests to work that render to a RB and then blit that
to a texture for input into a shader that uses sampler2DMS to verify it.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Back when I originally wrote this code, force_sechalf was only used for
Gen4 code, so I didn't bother hooking it up. However, it's used more
generally these days. In particular, we use it for computing
gl_SamplePosition.
Fixes Piglit's spec/ARB_sample_shading/builtin-gl-sample-position tests.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77222
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
We previously only allowed coalescing registers that interfere (i.e.,
whose live ranges overlap) if the destination register's live range was
entirely inside the source's live range. This is unnecessary -- we only
need to check for interfering writes in the intersection of their live
ranges.
total instructions in shared programs: 1639470 -> 1638453 (-0.06%)
instructions in affected programs: 84751 -> 83734 (-1.20%)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Rather than any old control flow. Muchnick's algorithm just checks for
interfering writes between the MOV and the end of the program. Handling
this when you have backward branches is hard, so don't, but there's no
reason to bail if you see forward branches.
instructions in affected programs: 4270 -> 4248 (-0.52%)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We were starting at the beginning of the instruction list, rather than
with the MOV instruction itself. This allows us to coalesce after
control flow.
Excluding the shaders from an unreleased title, the shader-db results:
total instructions in shared programs: 1603791 -> 1594215 (-0.60%)
instructions in affected programs: 678772 -> 669196 (-1.41%)
GAINED: 5
LOST: 0
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
And avoid rewriting other instructions unnecessarily. Removes a few
self-moves we weren't able to handle because they were components of a
large VGRF.
instructions in affected programs: 830 -> 826 (-0.48%)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
There's a few 3-component vertex attribute formats that have no
equivalent SVGA3D_DECLTYPE_x format. Previously, we had to use
the swtnl code to handle them. This patch lets us use hwtnl for
more vertex attribute types by fetching 3-component attributes as
4-component attributes and explicitly setting the W component to 1.
This lets us handle PIPE_FORMAT_R16G16B16_SNORM/UNORM and
PIPE_FORMAT_R8G8B8_UNORM vertex attribs without using the swtnl path.
Fixes piglit normal3b3s GL_SHORT test.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
There's no SVGA3D_DECLTYPE that directly corresponds to
PIPE_FORMAT_R8G8B8_SNORM. Previously, we used the swtnl fallback
path to handle this but that's slow and causes invariance issues.
Now we fetch the attribute as SVGA3D_DECLTYPE_UBYTE4N and insert
some extra VS instructions to remap the attributes from the range
[0,1] to the range[-1,1].
Fixes Sauerbraten sw fallback.
Fixes piglit normal3b3s-invariance test.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Now only translate the formats once in svga_create_vertex_elements_state().
And rename the array and use the proper SVGA3dDeclType type.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
This reverts commit c875d6e57a.
Conflicts:
src/gallium/drivers/svga/svga_context.c
This work-around will no longer be needed after the next patch
which properly supports signed-byte vertex attributes.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
This sets up the proper execution mask for sends in SIMD16 mode.
Fixes Piglit's glsl-fs-normalmatrix, glsl-fs-uniform-array-2,
glsl-fs-uniform-array-6, and glsl-fs-uniform-array-7 on Ironlake,
which regressed when I enabled SIMD16 pull parameter support in
commit b207e88b25.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
gl_ViewportIndex doesn't get its own varying slot. It is stored
in VARYING_SLOT_PSIZ.z. This patch fixes the issue for both gen7
and gen8 because gen7_upload_3dstate_so_decl_list() is shared
between them.
Fixes failures in OpenGL Khronos CTS test transform_feedback_builtins.
Makes new piglit test glsl-1.50-transform-feedback-builtins pass for
'gl_ViewportIndex'.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
gl_Layer doesn't get its own varying slot. It is stored in
VARYING_SLOT_PSIZ.y. This patch fixes the issue for both gen7
and gen8 because gen7_upload_3dstate_so_decl_list() is shared
between them.
Fixes failures in OpenGL Khronos CTS test transform_feedback_builtins.
Makes new piglit test glsl-1.50-transform-feedback-builtins pass for
'gl_Layer'.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Now that _debug_assert_fail() has the noreturn attribute, it is better
that execution truly never returns. Not just for sake of silencing the
warning, but because the code at the return IP address may be invalid or
lead to inconsistent results.
This removes support for the GALLIUM_ABORT_ON_ASSERT debugging
environment variable, but between the usefulness of
GALLIUM_ABORT_ON_ASSERT and better static code analysis I think better
static code analysis wins.
Reviewed-by: Brian Paul <brianp@vmware.com>
Same intent as commit a45a50a482,
but this the C compiler is detected via C-preprocessor macros,
similar to how autotools do it, as that seems to be the most
reliable method.
Reviewed-by: Brian Paul <brianp@vmware.com>
This allows the following shader code to work without a weird crash:
struct Foo {
int value[1];
};
int actual_value = Foo[2](Foo(int[1](100)), Foo(int[1](200)))[i].value[0];
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
nouveau_vp3_inter_sizes requires sliec_count as argument just
as the other places that call it from h264 code do. Hopefully
fixes something.
Fix the status_vp code to allow status == 0 too, when processing
hasn't started yet.
set h264->second_field correctly.
Otherwise it will trick the gallium driver into thinking that the render
target has actually changed (due to different pipe_surface pointing to
same underlying pipe_resource). This is really badness for tiling GPUs
like adreno.
This also appears to fix a rendering error with Motif on vmwgfx.
Why that is is still under investigation.
Based on an idea by Rob Clark.
Cc: "10.0 10.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Rob Clark <robclark@freedesktop.org>
Keep track of the maximal bounds of all the operations and set scissor
accordingly. For tiling GPU's this can be a big win by reducing the
memory bandwidth spent moving pixels from system memory to tile buffer
and back.
You could imagine being more sophisticated and splitting up disjoint
operations. But this simplistic approach is good enough for the common
cases.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Once the relevant branch has been identified do not iterate over the
instructions in the branch, do a linked list insertion instead to avoid the
loop.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Fixes piglit's fbo-blit-stretch test on drivers which use the meta path.
(i965: should fix Broadwell, but also fixes Sandybridge/Ivybridge/Haswell
since this test falls off the blorp path now due to format conversion)
V2: Use scissor instead of just mangling the rects, to avoid texcoord
rounding problems. (Thanks Marek)
V3: Rebase on Eric's CTSI meta changes; re-add _mesa_update_state in the
CTSI path so that _mesa_clip_blit sees the correct bounds.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77414
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Tested-by: Anuj Phogat <anuj.phogat@gmail.com>
According to the spec:
<renderbuffertarget> must be RENDERBUFFER and <renderbuffer>
should be set to the name of the renderbuffer object to be
attached to the framebuffer. <renderbuffer> must be either
zero or the name of an existing renderbuffer object of type
<renderbuffertarget>, otherwise an INVALID_OPERATION error is
generated.
This patch changes the previous returned GL_INVALID_VALUE to
GL_INVALID_OPERATION.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76894
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Now that we properly track accumulator dependencies, the scheduler is
able to schedule instructions between the mach and mov in the common
the integer multiplication pattern:
mul acc0, x, y
mach null, x, y
mov dest, acc0
Since a null destination implies no dependency on the destination, we
can also safely schedule instructions (that don't write the accumulator)
between the mul and mach.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This allows us to emit ADD/MUL/MAC instead of MUL/ADD/MUL/ADD,
saving one instruction and two temporary registers.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
This allows us to generate the MAC (multiply-accumulate) instruction,
which can be used to implement some expressions in fewer instructions
than doing a series of MUL and ADDs.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
This allows us to emit ADD/MUL/MAC instead of MUL/ADD/MUL/ADD,
saving one instruction and two temporary registers.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
This allows us to generate the MAC (multiply-accumulate) instruction,
which can be used to implement some expressions in fewer instructions
than doing a series of MUL and ADDs.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Our hardware has an "accumulator" register, which can be used to store
intermediate results across multiple instructions. Many instructions
can implicitly write a value to the accumulator in addition to their
normal destination register. This is enabled by the "AccWrEn" flag.
This patch introduces a new flag, inst->writes_accumulator, which
allows us to express the AccWrEn notion in the IR. It also creates a
n ALU2_ACC macro to easily define emitters for instructions that
implicitly write the accumulator.
Previously, we only supported implicit accumulator writes from the
ADDC, SUBB, and MACH instructions. We always enabled them on those
instructions, and left them disabled for other instructions.
To take advantage of the MAC (multiply-accumulate) instruction, we
need to be able to set AccWrEn on other types of instructions.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
OpenGL 4.0 spec, page 306 suggests an INVALID_OPERATION in glGetTexImage
if :
"format is one of the integer formats in table 3.3 and the internal
format of the texture image is not integer, or format is not one of
the integer formats in table 3.3 and the internal format is integer."
V2: Use helper function _mesa_is_format_integer()
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
mesa currently returns 4 when GL_VERTEX_ATTRIB_ARRAY_SIZE is queried
for a vertex array initially set up with size=GL_BGRA. This patch
makes changes to return size=GL_BGRA as required by the spec.
Fixes Khronos OpenGL CTS test: vertex_array_bgra_basic.test
V2: Use array->Format instead of adding a new variable
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
For graphics, the LLVM compiler backend currently has many shortcomings
compared to the non-LLVM one. E.g. it can't handle geometry shaders yet,
but that's just the tip of the iceberg.
So building Mesa with --enable-r600-llvm-compiler is currently not
recommended for anyone who doesn't want to work on fixing those issues.
However, for protection of users who end up enabling it anyway for some
reason, let's disable the LLVM backend at runtime by default. It can be
enabled with the environment variable R600_DEBUG=llvm.
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
This reverts commit a45a50a482.
Unfortunately gcc dumps argv[0] as the first word of --version, so it is
unreliable for detecting gcc.
In particular `cc --version` and `i686-w64-mingw32-gcc --version` give
wrong results.
A better solution needs to be found -- most likely using C-preprocessing
like autotools does. Revert for now.
For Clang static code analyzer, the scan-build script will produce more
comprehensive output. Nevertheless you can invoke it as
CC=clang CXX=clang++ scons analyze=1
For MSVC this is the best way to use its static code analysis. Simply
invoke as
scons analyze=1
Reviewed-by: Brian Paul <brianp@vmware.com>
Currently we can have name space collisions between blocks that define the same
fields. For example:
in block
{
vec4 Color;
} In[];
out block
{
vec4 Color;
} Out;
These two blocks will assign the same interface name (block.Color) to the Color
field in flatten_named_interface_blocks_declarations.cpp, leading to havoc.
This was breaking badly the gl-320-primitive-shading test from ogl-samples.
The patch uses the block instance name to avoid collisions, producing names
like block.In.Color and block.Out.Color to avoid the name clash.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76394
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The transfer staging texture is always freshly allocated, so for write-only
transfers we don't need to explicitly wait for the BO to become idle.
Squeezes a few hundered MB/s more out of x11perf -shmput500 with glamor.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This manifested as rendering failures or sometimes GPU hangs in
compositors when they accidentally got MSAA visuals due to a bug in the X
Server. Today we decided that the problem in compositors was equivalent
to a corruption bug we'd noticed recently in resizing MSAA-visual
glxgears, and debugging got a lot easier.
When we allocate our MCS MT, libdrm takes the size we request, aligns it
to Y tile size (blowing it up from 300x300=900000 bytes to 384*320=122880
bytes, 30 pages), then puts it into a power-of-two-sized BO (131072 bytes,
32 pages). Because it's Y tiled, we attach a 384-byte-stride fence to it.
When we memset by the BO size in Mesa, between bytes 122880 and 131072 the
data gets stored to the first 20 or so scanlines of each of the 3 tiled
pages in that row, even though only 2 of those pages were allocated by
libdrm. In the glxgears case, the missing 3rd page happened to
consistently be the static VBO that got mapped right after the first MCS
allocation, so corruption only appeared once window resize made us throw
out the old MCS and then allocate the same BO to back the new MCS.
Instead, just memset the amount of data we actually asked libdrm to
allocate for, which will be smaller (more efficient) and not overrun.
Thanks go to Kenneth for doing most of the hard debugging to eliminate a
lot of the search space for the bug.
Cc: "10.0 10.1" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77207
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We don't have any piglit tests for this currently.
v2: Use vec3s for the texcoords so it has some hope of working.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
You'll note from the previous commits that there's something of a loop
here: You call CTSI, which calls BlitFB, then if things go wrong that
falls back to CTSI. As a result, meta CTSI reaches over into blitfb to
tell it "no, don't try that fallback".
v2: Drop the _mesa_update_state(), which was only necessary due to use of
_mesa_clip_blit() in _mesa_meta_BlitFramebuffer() in another patch
series.
v3: Drop an _EXT suffix I copy-and-pasted.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> (v2)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
I added support to bind_fbo_image in the process of building meta
CopyTexSubImage, and found that it broke generatemipmap because previously
we would just throw a GL error there and then end up with an incomplete
FBO and fallback.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
I need to do the same code again for CopyTexSubImage().
v2: Drop incorrect, not-terribly-useful comment (review by Ken)
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> (v1)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This avoids a ReadPixels() if there's accelerated CopyTexImage present.
It now requires GLSL as opposed to just fragment programs, but we don't
have any drivers that do ARB_fp but not GLSL.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
There shouldn't be anything special about copying out a subset of the src
rb to a temp before texturing from it, so just do it when we're figuring
out our src texture binding.
This drops Anuj's change to copy an extra border of 1 pixel around the src
area. I can't see how that change could be valid, and presumably if
there's some filtering problem at edges we just need to set the right
wrap mode.
v2: Don't fall back to swrast on non-2D/RECT/2D_MS textures when we can
still CopyTexSubImage. Fixes a segfault regression on i965 with
gl-3.2-layered-rendering-blit.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> (v1)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v1)
Tested-by: Anuj Phogat <anuj.phogat@gmail.com>
I think we can assert that renderbuffer size is <= maximum 2D texture
size. Our source coordinates should have already been clipped to the src
renderbuffer size, but haven't actually (so we could potentially have
trouble if there's scaling, and we're in the CopyTexImage path that tries
to use src size). However, this texture size dependency was blocking the
next refactors, so I'm not sure if we want to go ahead with this series
before we get the clipping sorted out or not.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Putting NoDDClr and NoDDChk dependency control on instruction
sequences that include math opcodes can cause corruption of channels.
Treat math opcodes like send opcodes and suppress dependency hinting.
Signed-off-by: Mike Stroyan <mike@LunarG.com>
Tested-by: Tony Bertapelli <anthony.p.bertapelli@intel.com>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Matt Turner <mattst88@gmail.com>
total instructions in shared programs: 1653399 -> 1651790 (-0.10%)
instructions in affected programs: 92157 -> 90548 (-1.75%)
GAINED: 2
LOST: 2
Also significantly reduces the number of optimization loop iterations:
total loop iterations in shared programs: 39724 -> 31651 (-20.32%)
loop iterations in affected programs: 21617 -> 13544 (-37.35%)
Including some great pathological cases, like 29 -> 3 in Strike Suit
Zero and 24 -> 3 in Dota2.
Reviewed-by: Eric Anholt <eric@anholt.net>
We previously stopped searching for unread writes after encountering
control flow, but we can instead just search backwards until we hit
control flow.
instructions in affected programs: 22854 -> 22194 (-2.89%)
The generator uses its destination as a source implicitly, which breaks
some assumptions in dead code elimination. Giving the instruction a
source allows us to reason about it better.
We originally thought that GL 3.0 required GL_DEPTH_COMPONENT16 to map
exactly to Z16. However, we misread the specification, thanks in part
to LaTeX reordering the tables in the PDF.
Page 180 of the GL 3.0 specification (glspec30.20080923.pdf) says:
"[...] memory allocation per texture component is assigned by the GL to
match the allocations listed in tables 3.16-3.18 as closely as possible.
[...]
Required Texture Formats
[...]
In addition, implementations are required to support the following sized
internal formats. Requesting one of these internal formats for any
texture type will allocate exactly the internal component sizes and
types shown for that format in tables 3.16-3.17:"
Notably, however, GL_DEPTH_COMPONENT16 does /not/ appear in table 3.16
or table 3.17. It appears in table 3.18, where the "exact" rule doesn't
apply, and it falls back to the "closely as possible" rule.
The confusing part is that the ordering of the tables in the PDF is:
Table 3.16 (pages 182-184)
Table 3.18 (bottom of page 184 to top of 185)
Table 3.17 (page 185)
Presumably, people saw table 3.16, then saw the table immediately
following with DEPTH_COMPONENT* formats, and assumed it was 3.17.
Based on a patch by Chia-I Wu, but without the driconf option to force
Z16 to be used. It's not required, and there's apparently no benefit
to actually using it.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Chia-I Wu <olv@lunarg.com>
We've learned a few things since we originally disabled Z16; this attempts
to summarize the issue. I am no expert on this subject, though, so the
comment may not be totally accurate.
I did some benchmarking on GM45 and Ironlake, and discovered that for
GLBenchmark 2.7 EgyptHD, using Z16 was 3% slower on GM45 (n=15), and
4.5% slower on Ironlake (n=95). So, we can drop the "on Ivybridge"
aspect of the comment - it's always slower.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Chia-I Wu <olv@lunarg.com>
Significantly reduces BO allocation / destruction overhead for transfers,
e.g. measurable via x11perf -shm{ge,pu}t* with glamor.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The rules are about to get a bit more complex to account for
gl_InstanceID and gl_VertexID, which are system values.
Extracting this first avoids introducing duplication.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
glClearBuffer() is currently clearing all active draw color buffers (all
buffers that have not been set to GL_NONE when calling glDrawBuffers) instead
of only clearing the one it receives as parameter. Altough brw_clear()
receives a bit mask indicating the color buffers that should be cleared,
this mask is ignored when calling brw_blorp_clear_color().
This was breaking the 'fbo-drawbuffers-none glClearBuffer' piglit test.
The patch provides the bit mask to brw_blorp_clear_color() so it can limit
clearing to the color buffers present in the mask.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76832
Reviewed-by: Eric Anholt <eric@anholt.net>
This always looks crazy when I stumble across it, until I remember
what the hardware is doing. Describing it ought to short-circuit
that process next time :)
V2: Fix indents to 6 spaces, not 7.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Many shaders use a pattern such as:
for (int i = 0; i < NUM_LIGHTS; i++) {
...access a uniform array, or shader input/output array...
}
where NUM_LIGHTS is a small constant (such as 2, 4, or 8).
The expectation is that the compiler will unroll those loops, turning
the array access into constant indexing, which is more efficient, and
which may enable array splitting and other optimizations.
In many cases, our heuristic fails - either there's another tiny nested
loop inside, or the estimated number of instructions is just barely
beyond the threshold. So, we fail to unroll the loop, leaving the
variable indexing in place.
Drivers which don't support the particular flavor of variable indexing
will call lower_variable_index_to_cond_assign(), which generates piles
and piles of immensely inefficient code. We'd like to avoid generating
that.
This patch detects unsupported forms of variable-indexing in loops, where
the array index is a loop induction variable. In that case, it bypasses
the loop-too-large heuristic and forces unrolling.
Improves performance in various microbenchmarks: Gl32PSBump8 by 47%,
Gl32ShMapVsm by 80%, and Gl32ShMapPcf by 27%. No changes in shader-db.
v2: Check ir->array for being an array or matrix, rather than the
ir_dereference_array itself.
v3: Fix and expand statistics in commit message.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
The "fail" flag is set if loop_unroll_count encounters a nested loop;
calling the flag "nested_loop" is a bit clearer.
The original reasoning was that count is inaccurate (too small) if there
are nested loops, as we don't do any sort of analysis on the inner loop.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Loop unrolling will need to know a few more options in the future.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Now that we pass in gl_shader_compiler_options, it makes sense to just
use options->MaxUnrollIterations, rather than passing a separate
parameter.
Half of the invocations already passed options->MaxUnrollIterations,
while the other half passed in a hardcoded value of 32.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
This will prevent the two from getting out of sync again.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
These were out of sync with the flags used to control
lower_variable_index_to_cond_assign in brw_shader.cpp.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Not setting this would prevented coalescing after a failed attempt if
the sources for both MOVs were the same.
total instructions in shared programs: 1654531 -> 1650224 (-0.26%)
instructions in affected programs: 423167 -> 418860 (-1.02%)
GAINED: 2
LOST: 0
Reviewed-by: Eric Anholt <eric@anholt.net>
It's just the array index, so we can just go look at the array and see
which element we are.
No significant performance difference (n=140)
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
When considering assignment expressions like:
v.x += u.x;
v.x += u.x;
the vectorizer would incorrectly keep going, attempting to find more
instructions to vectorize. It would overwrite the saved assignment
to point at the second one, and increment channels a second time,
resulting in try_vectorize thinking the expression was a vec2 instead of
a float.
Instead, if we see a repeated assignment to a channel, just try to
vectorize everything we've found so far. This clears the saved state
so it will start over.
Fixes Piglit's repeated-channel-assignments.vert.
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
For blocks, gl_shader_program::UniformStorage isn't very useful. The
names stored there are the names of the elements of the block, so
finding blocks with an instance name is hard. There is also only one
entry in ::UniformStorage for each element of a block array, and that is
a deal breaker.
Using ::UniformBlocks is what _mesa_GetUniformBlockIndex does. I
contemplated sharing code between set_block_binding and
_mesa_GetUniformBlockIndex, but building the stand-alone compiler and
the unit tests make this hard. I plan to return to this effort shortly.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76323
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Cc: github@socker.lepus.uberspace.de
In the next patch, we'll see that using
gl_shader_program::UniformStorage is not correct for uniform blocks.
That means we can't use ::UniformStorage to select between the sampler
path and the block path. Instead we want to just use the type of the
variable. That's never passed to set_uniform_binding, and it's easier
to just remove the function (especially for later patches in the series)
than to add another parameter.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76323
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Cc: github@socker.lepus.uberspace.de
And remove nonsensical approximation of linear interpolation behavior
for shadow samplers.
Reviewed-by: Brian Paul <brianp@vmware.com>
Tested-by: Brian Paul <brianp@vmware.com>
These were missed/typo'd in the previous patch series:
s/R8G8B8A/R8G8B8A8/
s/rgba_16/RGBA_UNORM16/
s/rgba_uint/RGBA_UINT/
s/rgba_int/RGBA_SINT/
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The commit 3b0b44f7de introduced a build
error:
error: dereferencing pointer to incomplete type
This patch fixes this issue in all the affected files.
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Keep tasks as linked list, this way we can associate
more than one encoding task with each buffer.
Signed-off-by: Christian König <christian.koenig@amd.com>
It was always getting set to -8/7 unconditionally. Use the
driver-reported value instead.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Defaults to providing the same offsets as MIN/MAX_TEXEL_OFFSET. For
nvc0, the offset can be -32/31.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Create the screen in the winsys while the mutex is locked.
This also results in a nice code cleanup!
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
This also hides the reference count from drivers.
v2: update the reference count while the mutex is locked in winsys_create
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
This replaces u_gen_mipmap with an extremely simple implementation based
on pipe->blit. st/mesa is also cleaned up.
Pros:
- less code
- correct mipmap generation for NPOT 3D textures (u_blitter uses a better
formula)
- queries are not affected by mipmap generation if drivers disable them
v2: add "first_layer", "last_layer" parameters, drop "face"
v2.1: add format
v2.2: document the format parameter
This is needed by _mesa_generate_mipmap.
This adds an array of pipe_transfers to st_texture_image. Each transfer is
for mapping a single layer.
v2: allocate the array of transfers on demand
No longer used anywhere. These also caused trouble in the Gallium
state tracker code where we include both core Mesa and Gallium util
headers (and the macros were defined differently in each world.)
Removing these macros should help avoid macro mix-ups in the future.
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We moved away from MALLOC/FREE in the rest of core Mesa a while ago.
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We were using REALLOC() from u_memory.h but FREE() from imports.h.
This mismatch caused us to trash the heap on Windows after we
deleted a texture object.
This fixes a regression from commit 6c59be7776.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
This extension is a huge grab-bag of "stuff that's in DX11". Break it
apart to make it clear what still needs to be done.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This is the effective layer count, for clears etc. This differs from the
depth of the miptree level when views are involved.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>
We'll still avoid MinLayer here since the fast path doesn't understand
arrays at all, but it's straightforward to do levels.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>
This allows core mesa's TexSubImage paths etc to work correctly
with views which have nonzero MinLevel or MinLayer.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>
This is the actual mesa_format to use. In non-view cases this is always
the same as the mt's format.
V4: Comment style
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>
We need to wire the original texture's mt into the view. All the hard
work of setting up an appropriate tree of gl_texture_image structures
has already been done by core mesa.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>
If we were to relayout the miptree, we'd break any views that are
sharing it.
(Simplified based on suggestions from Eric)
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>
These formats can be cast to others (with different component types or
sizes) via ARB_texture_view or ARB_shader_image_load_store. We want
them to be laid out consistently so that we can just reinterpret the
memory with a different format.
In V1, this was done conditionally on a 'prefer_no_swizzle' flag which
was set in TexStorage/TextureView paths, but we need the same behavior
for ARB_shader_image_load_store (which also works with images created
via TexImage, so we don't want it to be conditional.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>
The sampler can handle R8G8B8X8 (and substitute 1.0 for the fourth
component) but we can't use it as a render target.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>
None of the other 3-component 16bpc formats are directly supported, so
they get promoted to XRGB equivalents. *Not* promoting RGB16F the same
way makes texture views much more fiddly -- we don't want to have to do
crazy copying behind the scenes.
(with my other master + my experimental ARB_texture_view support) fixes
the piglit test: `spec/ARB_texture_view/view compare 48bit formats`
No regressions in gpu.tests on Haswell.
V4: Don't alter the formats table -- just don't match it to a mesa_format. [Kenneth]
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>
This is supported by all generations, and is required for memory layout
consistency for texture_view.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>
Previously, we would unpack the texels to floats using *_TO_FLOAT_TEX,
and then pack them into the desired format using FLOAT_TO_*. Unfortunately,
this isn't quite the inverse operation, and so some texel values would
end up off-by-one.
This fixes the GL_RGB8_SNORM and GL_RGB16_SNORM subcases in piglit's
arb_texture_view-format-consistency-get test on i965. The similar 1-, 2-
and 4-component cases already worked because they took the memcpy path
rather than repacking.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>
While linux uses .so as a default extension for shared libraries that is
not the case for other platforms. The loader in libGL (and others) assumes
that the dri module will always have a .so extension, thus it will fail
to load on the affected platforms.
Spotted-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Filenames passed to dlopen() don't need to use the platform's default extension
for shared libraries.
Using the '.so' extension when dlopen()ing DRI drivers is hardcoded into mesa
and the X server, so it should be hardcoded here in the Makefile as well.
A similar fix is probably also needed for gallium DRI drivers.
(Consider that if we were starting from scratch, perhaps we would use a custom
extension like .dri instead)
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
This reverts commit 61bedc3d6b.
As the header is the one defining the API/ABI and is distributed
during installation, we should be using it rather than re-defining
the XA version in configure.ac.
Bump the version in the header to 2.2.0, to reflect what was the
original intent of commit 42158926c6.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
With commit 1f1928db001(glx: Drop _Xglobal_lock while we create and
initialize glx display) we've split the big _Xglobal_lock handling in
a more fine grained manner.
Unfortunatelly we forgot to drop the unlock_mutex on the error paths,
leading to undefined behaviour as the mutex is already unlocked.
Cc: Kristian Høgsberg <krh@bitplanet.net>
Cc: "9.2 10.0 10.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
We hit this assert with some piglit tests. Which appears to be a bug
outside of freedreno. Previously we were relying on assert() being
redefined to debug_assert() so that we didn't crash in release builds.
Somehow that stopped working. So just use debug_assert() directly.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Fixes a crash in svga_context_flush_buffers() if we use the 'draw' module
for AA lines (when the device doesn't support that feature). We need to
initialize this list before we setup the swtnl pieces.
Found/fixed by Charmaine Lee.
Cc: "10.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
The "new" fragment shader backend has never supported the necessary
color conversion code for this to work. We began using the new backend
in Mesa 7.10 for GLSL (commit a81d423d93, October 2010),
and for ARB_fragment_program in Mesa 9.1 (commit 97615b2d8c,
August 2012).
I haven't heard any complaints, so I don't think anyone will miss this
feature. I believe mplayer used it at one point, but these days
defaults to other paths anyway.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <idr@freedesktop.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
create_mov() was fixed up to handle neg/abs properly for interal mov's,
using absneg.f, but forgot to fix it for TGSI MOV's. The problem with
using add.f to handle negated mov's is that we can only take a single
const reg src. So:
MOV TEMP[n], -CONST[m]
would turn into:
add.f Rdst, (neg)CONST[m], 0.0
which would not work. Anyways, just remove the extra code and always
use create_mov() which DTRT.
This fixes piglit vs-op-neg-int test.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Applications frequently clear to colors other than 0.0 or 1.0, which
prevents us from doing fast color clears. In that case, we issue this
performance warning on basically every glClear call, resulting in so
much spam that it's nearly impossible to see any other messages.
Plus, I don't think it's useful. We aren't suggesting a better way to
do what the application developers want---we're just telling them it
would be faster to do something they don't want.
Driver developers have no control over the clear color, so this message
is totally useless to them.
A better alternative to get this sort of information is to use
INTEL_DEBUG=blorp, which tells you whether color clears were fast,
simd16 repdata, or slow.
v2: Rebase on has_color_component changes.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Keep track of whether we actually have any sam instructions in the
resulting shader, rather than using TGSI SAMP declarations. If the sam
instruction is optimized out, because the result is not used, we don't
want to emit texture state, etc. In fact emitting sampler state and/or
setting PIXLODENABLE bit when there are no texture fetches seems to
cause lockup.
In theory this should never happen for a "normal" shader, unless the
state tracker is wonky. But it is a very real possibility for binning
pass shaders.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Decompressing ETC2 textures was causing intermitent segfault
by copying resulting 4x4 texel block to the destination texture
regardless of the size of the destination texture. Issue found
via application crash in GLBenchmark 3.0's Manhattan test.
v2: add more detail comment. Compute limit outside inner loops.
v3: add bugzilla reference
v4: Correct cc syntax in commit log
v5: really grab the right patch
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74988
Cc: "9.2 10.0 10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> [v1, suggested v2-3]
v2: move allocation to a function as first step
to clean vid_enc_EncodeFrame
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
For TEX instructions, the set of samplers and sampler views should
be consistent. The XA state tracker sometimes passes an inconsistent
set of samplers and sampler views. Rather than assert and die, issue
a warning.
v2: add debugging code to detect inconsistent state.
v3: also check for null sampler in svga_state_tss.c
Cc: "10.0" "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Given
mov vgrf7, vgrf9.xyxz
add vgrf9.xyz, vgrf4.xyzw, vgrf5.xyzw
add vgrf10.x, vgrf6.xyzw, vgrf7.wwww
the last instruction would be wrongly changed to
add vgrf10.x, vgrf6.xyzw, vgrf9.zzzz
during copy propagation.
The issue is that when deciding if a record should be cleared, the old code
checked for
inst->dst.writemask & (1 << ch)
instead of
inst->dst.writemask & (1 << BRW_GET_SWZ(src->swizzle, ch))
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76749
Signed-off-by: Chia-I Wu <olv@lunarg.com>
Cc: Jordan Justen <jljusten@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romainck <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: "10.1" <mesa-stable@freedesktop.org>
Nothing bad came of this because they weren't used after visitor running,
but leaving them in a bad state seems like a recipe for pain later.
Suggested-by: Kenneth Graunke <kenneth@whitecape.org>
When you've got a simple solid-color shader that doesn't generate
pixel_x/y interpolation, we were deciding that the first vgrf was both the
undefined pixel_x and pixel_y, and extending its live interval to avoid
the stride problem. That tricked other optimization that tries to see if
a particular instruction is the last use of a variable.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We stopped doing variable index lowering for uniforms in
a64c1eb9b1, 5 months after the comment was
added.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
While we wish our optimization passes could identify all the cases where
we can coalesce our variables, we miss out on a lot of opportunities.
total instructions in shared programs: 1673849 -> 1673166 (-0.04%)
instructions in affected programs: 299521 -> 298838 (-0.23%)
GAINED: 7
LOST: 0
Note that many programs are "hurt". The notable ones are where we produce
unrolling in cases we didn't before (presumably just because of the lower
instruction count). But there are also some cases where pushing things
right into the variables prevents copy propagation and tree grafting,
since we don't split our variable usage webs apart.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
is_power_of_two() is now provided by mesa so its definition must be removed
from the i915 driver code.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The next patch will introduce an optimization that only works when
integers are not represented as floating point values.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The next few patches will introduce an optimization that only works when
integers are not represented as floating point values.
v2: Re-word-wrap a line, as requested by Ian Romanick.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
ir_binop_ubo_load takes unsigned integer operands. However, the array
index used to compute these offsets may be a signed integer. (For
example, see Piglit's spec/glsl-1.40/uniform_buffer/fs-bvec-array).
For some reason, we were missing an ir_binop_i2u cast, and ir_validator
was failing to catch that.
Without this change, ir_builder's type inference code broke for me when
writing a new optimization pass.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The vector backend already implemented this optimization, but
surprisingly, we never bothered to implement it in the scalar backend.
In addition to saving two instructions, this eliminates a use of the
accumulator as an explicit source, which is unsupported in SIMD16 mode
on Gen7+, which could help us gain SIMD16 programs.
Cuts 19.23% of the instructions in dolphin/efb2ram.shader_test.
v2: Rebase on is_16bit_integer_constant -> is_uint16_constant rename.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The i965 MUL instruction doesn't natively support 32-bit by 32-bit
integer multiplication; additional instructions (MACH/MOV) are required.
However, we can avoid those if we know one of the operands can be
represented in 16 bits or less. The vector backend's is_16bit_constant
static helper function checks for this.
We want to be able to use it in the scalar backend as well, which means
moving the function to a more generally-usable location. Since it isn't
i965 specific, I decided to make it an ir_constant method, in case it
ends up being useful to other people as well.
v2: Rename from is_16bit_integer_constant to is_uint16_constant, as
suggested by Ilia Mirkin. Update comments to clarify that it does
apply to both int and uint types, as long as the value is
non-negative and fits in 16-bits.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Performance warnings are logged via KHR_debug in addition to when the
INTEL_DEBUG=perf environment variable is set. Without this, messages in
debug contexts would have "(null)" for the reason.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
These are clearly needed---the comments in the function are even present
for each one of them. I originally had two separate state atoms for
3DSTATE_SBE and 3DSTATE_SBE_SWIZ. When I combined the functions, I must
have forgotten to add the atoms for 3DSTATE_SBE_SWIZ.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Nothing actually uses this---we handle rasterizer discard in the
clipper in order for statistics counters to work.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
renderer_copy_prepare was setting the first sampler but never telling
the cso code how many samplers were actually used. Fix this.
Cc: "10.1" <mesa-stable@freedesktop.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Binding a new destination may cause the svga driver to emit draw calls
while propagating the surface. Make sure this doesn't happen in the middle
of sampler state setup where state may be incosistent.
In practice, surface propagation should never happen here and even if it did,
it wouldn't be a valid reason for the svga driver to emit partially set up
state, but to avoid future uncertainties, make sure this doesn't happen
anyway.
Found while auditing the state tracker for inconsistent sampler state /
sampler view setup.
Cc: "10.1" <mesa-stable@freedesktop.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
I think this was used for coalescing out partly dead large virtual
registers, but the patch that enabled that caused regressions and didn't
make it upstream.
Reviewed-by: Eric Anholt <eric@anholt.net>
It's more likely that we won't find writes to all channels than one will
interfere, and calculating interference is more expensive. This change
will also help prepare for coalescing load_payload instructions'
operands.
Also update the live intervals for all channels, and not just the last
that we saw.
Reviewed-by: Eric Anholt <eric@anholt.net>
The intent in 9b6b084eb7 was
for urb .size and .min_vs_entries fields to use the values
from the GEN8_FEATURES macro.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Rename functions to match format names.
sed commands:
s/signed_rgba8888_rev/R8G8B8A8_SNORM/g
s/signed_rgba8888/A8B8G8R8_SNORM/g
s/f_rgba8888_rev/R8G8B8A_UNORM/g
s/f_rgba8888/A8B8G8R8_UNORM/g
s/f_rgbx8888_rev/R8G8B8X8_UNORM/g
s/f_rgbx8888/X8B8G8R8_UNORM/g
s/f_argb8888_rev/A8R8G8B8_UNORM/g
s/f_argb8888/B8G8R8A8_UNORM/g
s/f_xrgb8888_rev/X8R8G8B8_UNORM/g
s/f_xrgb8888/B8G8R8X8_UNORM/g
s/signed_rgbx8888/X8B8G8R8_SNORM/g
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Implement guest-backed surface sharing using prime fds. Previously only
legacy surfaces could use this functionality. Also use the vmwgfx 2.6
single-ioctl prime fd reference if available.
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
This opcode provide support for GL_ARB_texture_query_lod,
Signed-off-by: Dave Airlie <airlied@redhat.com>
[imirkin: rebase, docs update]
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cuts a small handful of instructions in Serious Sam 3:
instructions in affected programs: 4692 -> 4666 (-0.55%)
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Which would lead to translating
mad vgrf9:F, vgrf3:F, u0:F, vgrf6:F
mov.sat vgrf7:F, -vgrf9:F
into
mad.sat vgrf9:F, vgrf3:F, u0:F, vgrf6:F
mov vgrf7:F, -vgrf9:F
Fixes some lighting effects in Dota2.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76749
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
ip needs to be initialized to start_ip - 1, since the first thing in the
main loop is ip++. Otherwise we would incorrectly propagate the saturate
from the mov to the mad:
mad a, b, c, d
mov.sat x, a
add y, z, a
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Previously we'd ignore the sources of instructions with non-GRF
destinations when calculating calculating the dead channels. This would
lead to us incorrectly removing the first instruction in this sequence:
mov vgrf11, ...
cmp.ne.f0 null, vgrf11, 1.0
mov vgrf11, ...
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76616
Or else poor programmers might mistakenly use the temporary mem_ctx,
instead of the fs_visitor's mem_ctx and wonder why their code is
crashing.
Also remove the parenting. These contexts are local to the optimization
passes they're in and are freed at the end.
Otherwise calling dump_instructions() after declaring a new fs_reg would
segfault when calculate_register_pressure()'s loop over reg walked off
the end of the virtual_grf_start[] array that calculate_live_intervals()
would have reallocated for you, if it had known there was a new
register.
Don't hardcode /dev/dri/card0 but instead use the drm
macros which allows the correct /dev/drm0 device to be
opened on OpenBSD.
v2: use snprintf and fallback to /dev/dri/card0
v3: check for snprintf truncation
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
After the loader changes libudev is no longer required for
gbm or the egl drm/wayland platforms. Lets these build/run
on OpenBSD.
v2: preserve the libudev requirement for Linux as suggested
by Emil Velikov.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
After the loader changes libudev is no longer required to
build gbm or the egl drm/wayland platforms.
Remove a libudev ifdef which allows the the drm egl driver
to be loaded on OpenBSD.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
OpenBSD does not have DT_NEEDED entries for libc by design,
over concerns how the symbols would be referenced after
changing the major version of the library.
So avoid -no-undefined checks on OpenBSD as they will fail.
v2: don't include the -no-undefined libtool option in the variable
and change -Wl,--no-undefined references in Automake.inc as well.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76856
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The targets do not require expat or selinux. Use GALLIUM_COMMON_LIB_DEPS
which provides the core requirements for each gallium target.
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The targets do not require expat or selinux. Use GALLIUM_COMMON_LIB_DEPS
which provides the core requirements for each gallium target.
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The build system will use g++ to link the static library due to the
dummy.cpp source(s). Thus one does not need the explicit link against
stdc++.
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The build system does not know that the static library is C++.
Mention the cpp file to trigger generation of the proper variable
and drop the hacky stdc++ linking.
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
With recent commit we started de-duplicating all of the compiler/
linker flags moving their handling inside Automake.inc.
This did not take into consideration that the above variable was set
at configure time, leading to issues on certain build combinations.
Move the variable to where it's used/handled thus cleaning up
configure.ac.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76848
Tested-by: Vinson Lee <vlee@freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The pkg-config module was called "EXPAT" instead of "expat" in
PKG_CHECK_EXISTS. This seems to have been wrong because the wrong
argument was copied from PKG_CHECK_MODULES.
Cc: "10.0" "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
_GNU_SOURCE is only set/required for linux*|*-gnu*|gnu*) and as the
functionality is available on other systems check for RTLD_DEFAULT instead.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Platforms that lack libudev (OpenBSD and possibly others) need
this change in order to load the correct dri driver.
Under linux we unconditionally require libudev, thus this code
will never get build.
v2: Add commit message (Emil Velikov)
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
This reverts commit 96e8b916a7.
In the case of VCE encoding with raw YUV file, CPU load directly
to VRAM is faster than combination of CPU writing to GTT and
then blit to VRAM with GPU.
Reviewed-by: Christian König <christian.koenig@amd.com>
Keep a dynamically increasing array of all the views
created for a texture instead of just the last one.
v2: add comments, fix array size calculation,
release only the first sampler view found
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
The xa version number had to be set in two places. In configure.ac and in
xa_tracker.h. Furthermore, xa_tracker.h is an installed header so we can't
use mesa internal defines. So therefore, at configure time, modify the
xa_tracker.h header to use the version given by configure.ac
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
/me puts a paper bag on his head and sits in the corner.
This was supposed to be included in 5a68f731, which added
glPointSizePointerOES back to the list of functions exposed by
libGLESv1_CM. It looks like it was an uncommitted change in my tree
when I sent the patch out.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
We are checking for no-ops in the CSO module for both of these items
so there's no reason to do it in the driver.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
As we do for sampler states in single_sampler_done() and many other
CSO functions.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Previously GLX_EXT_buffer_age has always been advertised as supported because
both client_glx_support and client_glx_only where set. So it did not matter
that direct_support is only set when running dri3 and we ended up always
advertising it.
Fix that by not setting client_glx_only for buffer_age in known_glx_extensions.
Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We want to call pipe->set_sampler_views() with count being the
maximum of the old number of sampler views and the new number.
This makes sure we null-out any old sampler views.
We already do the same thing for sampler states in single_sampler_done().
Fixes some assertions seen in the VMware driver with XA tracker.
Cc: "10.0" "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Tested-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Ages ago Chia-I added an ES compatibility flag to several of the various
generator scripts. The intention was to bridge differences between ES
and desktop in Mesa builds without ES. It doesn't appear that it has
ever been used. Recent changes to static_dispatch status of several ES1
functions caused problems in desktop-only, non-shared-glapi builds.
Enabling the ES compatibility mode appears to fix these build problems.
This is kind of a duct tape solution to this problem. As I mentioned in
the cover letter for the series that triggered the build problem, I
would like to make some major changes to the generator architecture and
the XML. The whole point of the proposed architecture changes is to
better handle the differences between desktop GL and ES. I think duct
tape is okay for now.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76869
Tested-by: Brian Paul <brianp@vmware.com>
Tested-by: Lu Hua <huax.lu@intel.com>
Cc: Vinson Lee <vlee@freedesktop.org>
Cc: Chia-I Wu <olv@lunarg.com>
Commit fb78fa58 made the GL_ARB_debug_output functions aliases of the
GL_KHR_debug output functions. As a result, the function names in
struct _glapi_table also changed. The table in check_table.cpp used the
ARB names.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <t_arceri@yahoo.com.au>
Tested-by: Brian Paul <brianp@vmware.com>
Tested-by: Lu Hua <huax.lu@intel.com>
Cc: Vinson Lee <vlee@freedesktop.org>
C89 has a fairly short minimum-maximum string length. To support
compilers limited by the C89 limits, this script had a mode where it
would generate a character array instead of a giant string. These were
functionally the same, but the code generated for the character array is
HUGE and difficult to read.
As far as I can tell, nothing in Mesa uses '-m short' any more. The
generated files used to be tracked in revision control, but I think we
stopped using '-m short' when we stopped tracking the generated files.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Brian Paul <brianp@vmware.com>
Tested-by: Lu Hua <huax.lu@intel.com>
Cc: Vinson Lee <vlee@freedesktop.org>
Nested for loops running through tables against which they
finally do an assert were ran also with optimized builds.
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
% operator could return negative value which would cause
indexing before perm table. Change %256 to &0xff
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This is to avoid running out of query buffer space due to winsys
limitations. Instead of a fixed size per screen pool of query buffers,
use a slab allocator that allocates a new slab if we run out of space
in the first one.
v2: Correct email addresses.
v3: s/8192/VMW_QUERY_POOL_SIZE/. Improve documentation and log message.
Reported-and-tested-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
This adds a gallium cap that allows us to fake GL3.0 by
not exposing MSAA on sw rendering.
It also forces the extra extensions needed for GL3.2.
Signed-off-by: Dave Airlie <airlied@redhat.com>
This reverts commit f6e290f80c.
To fix the broken build. The DRI-enabled build seems OK after reverting.
Th non-DRI/gallium build is still suffering from an unrelated issue in
the pipe-loader code.
Currently, we raise an error when doing this which breaks a conformance
test from the OpenGL samples pack. Even if this is a bit silly it is not
an error.
From http://www.opengl.org/wiki/Rectangle_Texture:
"Rectangle textures contain exactly one image; they cannot have mipmaps.
Therefore, any texture parameters that depend on LODs are irrelevant
when used with rectangle textures; attempting to set these parameters to
any value other than 0 will result in an error."
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76496
Reviewed-by: Brian Paul <brianp@vmware.com>
The previous commit stopped exporting 21 libGLESv2 and 88 libGLESv1_CM
functions. This removes the work-arounds for those functions from
ABI-check.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Acked-by: Chad Versace <chad.versace@linux.intel.com>
This has been a long standing issue with the ES libraries. Functions
marked in the XML with 'static_dispatch=false' were still incorrectly
exported. ABI-check is supposed to detect this case, but we have to
paper over failures every time a new extension is added.
This change will cause a big pile of functions to disappear from
libGLESv2 and libGLESv1_CM.
libGLESv2 loses (20 functions):
glBindVertexArrayOES
glCompressedTexImage3DOES
glCompressedTexSubImage3DOES
glCopyTexSubImage3DOES
glDeleteVertexArraysOES
glDiscardFramebufferEXT
glDrawBuffersNV
glFlushMappedBufferRangeEXT
glFramebufferTexture3DOES
glGenVertexArraysOES
glGetBufferPointervOES
glGetProgramBinaryOES
glIsVertexArrayOES
glMapBufferOES
glMapBufferRangeEXT
glProgramBinaryOES
glReadBufferNV
glTexImage3DOES
glTexSubImage3DOES
glUnmapBufferOES
libGLESv1_CM loses (88 functions):
glAlphaFuncxOES
glBindFramebufferOES
glBindRenderbufferOES
glBlendEquationOES
glBlendEquationSeparateOES
glBlendFuncSeparateOES
glCheckFramebufferStatusOES
glClearColorxOES
glClearDepthfOES
glClearDepthxOES
glClipPlanefOES
glClipPlanexOES
glColor4xOES
glDeleteFramebuffersOES
glDeleteRenderbuffersOES
glDepthRangefOES
glDepthRangexOES
glDiscardFramebufferEXT
glDrawTexfOES
glDrawTexfvOES
glDrawTexiOES
glDrawTexivOES
glDrawTexsOES
glDrawTexsvOES
glDrawTexxOES
glDrawTexxvOES
glFlushMappedBufferRangeEXT
glFogxOES
glFogxvOES
glFramebufferRenderbufferOES
glFramebufferTexture2DOES
glFrustumfOES
glFrustumxOES
glGenerateMipmapOES
glGenFramebuffersOES
glGenRenderbuffersOES
glGetBufferPointervOES
glGetClipPlanefOES
glGetClipPlanexOES
glGetFixedvOES
glGetFramebufferAttachmentParameterivOES
glGetLightxvOES
glGetMaterialxvOES
glGetRenderbufferParameterivOES
glGetTexEnvxvOES
glGetTexGenfvOES
glGetTexGenivOES
glGetTexGenxvOES
glGetTexParameterxvOES
glIsFramebufferOES
glIsRenderbufferOES
glLightModelxOES
glLightModelxvOES
glLightxOES
glLightxvOES
glLineWidthxOES
glLoadMatrixxOES
glMapBufferOES
glMapBufferRangeEXT
glMaterialxOES
glMaterialxvOES
glMultiTexCoord4xOES
glMultMatrixxOES
glNormal3xOES
glOrthofOES
glOrthoxOES
glPointParameterxOES
glPointParameterxvOES
glPointSizePointerOES
glPointSizexOES
glPolygonOffsetxOES
glQueryMatrixxOES
glRenderbufferStorageOES
glRotatexOES
glSampleCoveragexOES
glScalexOES
glTexEnvxOES
glTexEnvxvOES
glTexGenfOES
glTexGenfvOES
glTexGeniOES
glTexGenivOES
glTexGenxOES
glTexGenxvOES
glTexParameterxOES
glTexParameterxvOES
glTranslatexOES
glUnmapBufferOES
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Chia-I Wu <olv@lunarg.com>
Cc: Paul Berry <stereotype441@gmail.com>
This is hella ugly. The same-named function in desktop OpenGL is
hidden, but it needs to be exposed by libGLESv2 for OpenGL ES 3.0.
There's no way to express in the XML that a function should be be hidden
in one API but exposed in another.
This won't affect any change now, but it will prevent a regression in a
later patch.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Functions that are part of OpenGL ES 1.0 or 1.1 should have static
dispatch functions in libGLESv1_CM. This doesn't affect any change yet,
but it will prevent later regressions.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Acked-by: Chad Versace <chad.versace@linux.intel.com>
It looks like these were added accidentally by Paul in commit 1a1db174.
From the commit message and the look of the patch, I think this was just
some sed-job left overs.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
It was my understanding that the writemask works in SIMD4x2 mode for
texturing instructions and doesn't require a message header. Some bit of
this logic must be wrong, so disable it until it's understood.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76617
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
By doing GC the linker removes all the symbols that are not referenced
and/or used by the final library. This results in a saving of ~100K
up-to ~600K per (stripped) binary (classic vs gallium drivers).
If interested one can ask the compiler to print the sections that are
removed using -Wl,--print-gc-sections.
v2: Check if ld supports the flag before using it.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Matt Turner <mattst88@gmail.com> (v1)
... apart from the dri drivers.
With this final change we can build mesa without fear that
the resulting libraries will have unresolved symbols.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Set the flag for all but the dri targets. They have missing
glapi symbols which are required for the normal operation with
the X server.
Jon, I fear that you'll need to carry the "no-undefined" hunk
locally when building the dri drivers under cygwin.
Cc: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Explicitly setting the linker variable was required for old and broken
build toolchains. At this point this should no longer be needed, and
setting the sources lists will trigger generation of the correct LINK
variables.
Explicitly include dummy.cpp to use g++ to link the static library which
in most cases is based upon C++ code.
v2: Reword commit message.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This lets us have only one if HAVE_MESA_LLVM block, rather than
one for each driver.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Every library uses the same libtool/linker flags. Compact those
into AM_LDFLAGS and append the version script to it.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Or it compiles them in, but pretends they don't exist
v2: Rebase (Emil)
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Mesa does _not_ link against libudev. Additionally the only place
that deals with it is the loader, thus we can drop the CFLAGS.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
It makes little sense to enable the vdpau, xvmc and omx state-trackers
as they do not make use of (don't work with) the software driver.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
grep -q is easier to read and consistent with the rest of configure.ac.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Gallium osmesa links against the softpipe driver, thus the build
will fail if it's missing.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Matt Turner <mattst88@gmail.com>
Evidently at least static OSMesa is still used as shared one
causes substantial increase in the load time for some programs
that use it (from seconds up-to ~30min).
Rather than forcing everyone to use shared mesa, revert commit
a6efbac9fb and default to shared
build when both shared and static are disabled.
v2: Whitespace cleanup, drop silly comment.
Reported-by: Burlen Loring <burlen.loring@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
GL_INTENSITY has never been valid as a pixel format -- to get the memcpy
pack/unpack paths, the app needs to specify GL_RED as the pixel format
(or GL_RED_INTEGER for the integer formats).
Note: This was briefly merged before, but exposed some breakage in gallium, so
was reverted. Hopefully it will stick this time.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Brian Paul <brianp@vmware.com>
_mesa_format_matches_format_and_type() returns true for
GL_RED/GL_RED_INTEGER (with an appropriate type) into an intensity
mesa_format.
We want the `red`-based format instead, regardless of the order we find
them in our walk of the mesa formats list.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The case for this was in the wrong function, and this format's store
func was not set in the table at all.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Brian Paul <brianp@vmware.com>
Whether or not the coords are normalized is handled in the texture
state. But we otherwise need to treat RECT sample instructions as 2D.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
In some cases, we need a register to be assigned up to three components
before the base. Since we can't have negative register #'s, just shift
everything up. May increase register usage for trivial shaders, but I
don't think we are shader limited in those cases. A proper solution is
going to require a better register assignment algorithm (which is on the
TODO list), this is just a hack to get us by until then.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
RB_FRAME_BUFFER_DIMENSION is not a banked context register, so we need
to wait for the GPU to idle before updating it. But we'd rather not
have unnecessary WFI's, so actually keep track if we need to emit it or
not.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
This is something that XA triggers. In some cases it will only use
SAMP[1] (composite mask) but not SAMP[0] (composite src).
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Based on a patch by Ville Syrjälä.
As usual, these are placeholder values; actual values will come later.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
This is the closing for the "\defgroup IR Intermediate representation
nodes" all the way at the top of the file.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
When doing software rendering (i.e. rendering to the selection buffer) we need
to make sure that we have valid index bounds before calling _tnl_draw_prims(),
otherwise we can crash.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59455
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The underlying glDrawArrays() calls weren't getting compiled into
the display list. We simply need to use the current dispatch table
so the CALL_DrawArrays() is routed to the display list save function.
This patch also fixes glMultiModeDrawArraysIBM and
glMultiModeDrawElementsIBM.
Fixes the new piglit gl-1.4-dlist-multidrawarrays test.
Cc: "10.0" "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Previously we only examined the GL_DEPTH_MODE state to determine the
sampler view swizzle for depth textures. Now we also consider the
texture base format for color textures too.
The basic idea is if we're sampling from a RGB texture we always
want to get A=1, even if the actual hardware format might be RGBA.
We had assumed that the texture's A values were always one since that's
what Mesa's texstore code does. But if we render to the RGBA texture,
the A values might not be 1. Subsequent sampling didn't return the
right values.
Now we examine the user-specified texture base format vs. the actual
gallium format to determine the right swizzle.
Fixes several fbo-blending-formats, fbo-clear-formats and fbo-tex-rgbx
failures with VMware/svga driver (and possibly other drivers).
No other piglit regressions with softpipe or VMware/svga.
Reviewed-by: Marek Olšák <maraeo@gmail.com>
In preparation for following changes.
I used a temporary test harness to compare the old code to the new
for all possible swizzle inputs. No change in results.
This also happens to fix a leak of the current GS pull constant BO on
context destroy, by just not holding on to the pull const bos after the
surface state is generated.
No statistically significant performance difference on GLB2.7 on HSW at
1024x768 (n=40) or 320x240 (n=44), or on BYT at 320x240 (n=47).
v2: Rebase on intel_upload simplification.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The implementation kept a page-sized area for uploading data, and
uploaded chunks from that to a 64kb-sized streamed buffer. This wasted
cache footprint (and extra state tracking to do so) when we want to just
write our data into the buffer immediately.
Instead, build it around an interface like brw_state_batch() that just
gets you a pointer to BO memory to upload your stuff immediately.
Improves OpenArena on HSW by 1.62209% +/- 0.355299% (n=61) and on BYT by
1.7916% +/- 0.415743% (n=31).
v2: Rebase on Mesa master, drop old prototypes. Re-do performance
comparison on a kernel that doesn't punish CPU efficiency
improvements.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
it's useful to know what the llvmbuildstore arguments are going to
be before executing it because it can crash and make sure to
print out the inputs only if we're not generating a gs because
it fetches inputs differently.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
We used to overallocate the output buffer sometimes running out
of memory with applications rendering large geometries. The actual
maximum number of vertices out is simply the maximum number of
primitives in (number of gs invocations) multiplied by the maximum
number of output vertices per gs input primitive (i.e. gs invocation).
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Don't pass null query object pointers into gallium functions.
This avoids segfaulting in the VMware driver (and others?) if the
pipe_context::create_query() call fails and returns NULL.
Cc: "10.0" "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
sed commands:
s/ARGB2101010_UINT\b/B10G10R10A2_UINT/g
s/ABGR2101010_UINT\b/R10G10B10A2_UINT/g
Reviewed-by: Reviewed-by: Roland Scheidegger <sroland@vmware.com>
It is quite hard to meet the dependency of the libxml2 python bindings
outside Linux, and in particularly on MacOSX; whereas ElementTree is
part of Python's standard library. ElementTree is more limited than
libxml2: no DTD verification, defaults from DTD, or XInclude support,
but none of these limitations is serious enough to justify using
libxml2.
In fact, it was easier to refactor the code to use ElementTree than to
try to get libxml2 python bindings.
In the process, gl_item_factory class was refactored so that there is
one method for each kind of object to be created, as it simplifies
things substantially.
I confirmed that precisely the same output is generated for GL/GLX/GLES.
v2: Remove m4/ax_python_module.m4 as suggested by Matt Turner.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Release the references to the sampler views before
destroying the pipe context.
v2: remove TODO and unrelated change
v3: move to st_texture.[ch], rename callback, add comment
v4: fix rebase mess up and add further cleanups
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: "10.0 10.1" <mesa-stable@lists.freedesktop.org>
This can get called in some circumstances if both src type and dst type
have same width (seen with float32->unorm32). While this particular case
was bogus anyway let's just fix that as it can work trivially (due to the
way it was called it actually worked anyway apart from the assert).
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
When deciding if a clear color is suitable for fast clear,
take into account if a color channel is active in the
buffer format.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This patch introduces two pre-canned MOCS values: BDW_MOCS_WB
(write-back, all caches) and BDW_MOCS_WT (write-through, all caches).
We use write-through caching for render targets, and write-back for
all other data. (At least on Haswell, I believe write-back LLC/eLLC
didn't work for scan-out buffers, while write-through did.)
No performance analysis has been done on the impact of this patch.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>
All of the functionality is implemented in a private function in the one
file where it is used.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Fix eglCreateImage() from a packed dma_buf surface with a non-zero offset
to pixels data. In particular, this fixes support for planar YUV surfaces
when they are individually mapped on a per-plane basis, i.e. when the
OES_EGL_image_external is not used and user application wants to use its
own shader code for composition, or processing on individual plane (OCL).
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Implementation note:
I don't use context for ralloc (don't know how).
The check on PROGRAM_SEPARABLE flags is also done when the pipeline
isn't bound. It doesn't make any sense in a DSA style API.
Maybe we could replace _mesa_validate_program by
_mesa_validate_program_pipeline. For example we could recreate a dummy
pipeline object. However the new function checks also the
TEXTURE_IMAGE_UNIT number not sure of the impact.
V2:
Fix memory leak with ralloc_strdup
Formatting improvement
V3 (idr):
* Actually fix the leak of the InfoLog. :)
* Directly generate logs in to gl_pipeline_object::InfoLog via
ralloc_asprintf isntead of using a temporary buffer.
* Split out from previous uber patch.
* Change spec references to include section numbers, etc.
* Fix a bug in checking that a different program isn't active in a stage
between two stages that have the same program. Specifically,
if (pipe->CurrentVertexProgram->Name == pipe->CurrentGeometryProgram->Name &&
pipe->CurrentGeometryProgram->Name != pipe->CurrentVertexProgram->Name)
should have been
if (pipe->CurrentVertexProgram->Name == pipe->CurrentFragmentProgram->Name &&
pipe->CurrentGeometryProgram->Name != pipe->CurrentVertexProgram->Name)
v4 (idr): Rework to use CurrentProgram array in loops.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This is much like _mesa_sampler_uniforms_are_valid, but it operates
across an entire pipeline object.
This function differs from _mesa_sampler_uniforms_are_valid in that it
directly creates the gl_pipeline_object::InfoLog instead of writing to
some temporary buffer.
This was originally included in another patch, but it was split out by
Ian Romanick.
v2 (idr): Fix the loop bounds. shProg isn't an array, so
ARRAY_SIZE(shProg) was 1, so only the vertex program was validated.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
V2 (idr):
* Keep the behavior of other info logs in Mesa: and empty info log
reports a GL_INFO_LOG_LENGTH of zero.
* Use a NULL pointer to denote an empty info log.
* Split out from previous uber patch.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Test become green in piglit:
The updated ext_transform_feedback-api-errors:useprogstage_noactive useprogstage_active bind_pipeline
arb_separate_shader_object-GetProgramPipelineiv
arb_separate_shader_object-IsProgramPipeline
For the moment I reuse Driver.UseProgram but I guess it will be better
to create a UseProgramStages functions. Opinion is welcome
V2: formatting & rename
V3 (idr):
* Change spec references to core OpenGL versions instead of issues in the
extension spec.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Now arb_separate_shader_object-GetProgramPipelineiv should pass.
V3 (idr):
* Change spec references to core OpenGL versions instead of issues in
the extension spec.
* Split out from previous uber patch.
v4 (idr): Use _mesa_has_geometry_shaders in _mesa_UseProgramStages to
detect availability of geometry shaders.
v5 (idr): Whitespace cleanup, use _mesa_lookup_shader_program_err
instead of open-coding it again, and update some comments at the end of
_mesa_UseProgramStages. All suggested by Eric.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Extend use_shader_program to support a different target. Allow to reuse the
function to update the pipeline state. Note I bypass the flush when target
isn't current. Maybe it would be better to create a new UseProgramStages
driver function
This was originally included in another patch, but it was split out by
Ian Romanick.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
save and restore _Shader/Pipeline binding point. Rational we don't want any
conflict when the program will be unattached.
V2: formatting improvement
V3 (idr):
* Build fix. The original patch added calls to _mesa_use_shader_program
with 4 parameters, but the fourth parameter isn't added to that
function until a much later patch. Just drop that parameter for now.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Basically a sed but shaderapi.c and get.c.
get.c => GL_CURRENT_PROGAM always refer to the "old" UseProgram behavior
shaderapi.c => the old api stil update the Shader object directly
V2: formatting improvement
V3 (idr):
* Rebase fixes after a block of code was moved from ir_to_mesa.cpp to
shaderapi.c.
* Trivial reformatting.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
To avoid NULL pointer check a default pipeline object is installed in
_Shader when no program is current
The spec say that UseProgram/UseShaderProgramEXT/ActiveProgramEXT got an
higher priority over the pipeline object. When default program is
uninstall, the pipeline is used if any was bound.
Note: A careful rename need to be done now...
V2: formating improvement
V3 (idr):
* Build fix. The original patch added calls to _mesa_use_shader_program
with 4 parameters, but the fourth parameter isn't added to that
function until a much later patch. Just drop that parameter for now.
* Trivial reformatting.
* Updated comment of gl_context::_Shader
v4 (idr): Reformat spec quotations to look like spec quotations. Update
comments describing what gl_context::_Shader can point to. Bot
suggested by Eric.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Eliminate lp_vertex_shader, as it added nothing over draw_vertex_shader.
Simplify lp_geometry_shader, as most of the incoming state is unneeded.
(We could also just use draw_geometry_shader if we were willing to peek
inside the structure.)
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
* Add HAVE_PTHREAD, we do have pthread support wrappers now for
non-native Haiku threaded applications.
* Viewport changed behavior recently breaking the build.
We fix this by looking at the gl_context ViewportArray
(Thanks Brian for the idea)
Acked-by: Brian Paul <brianp@vmware.com>
The SIMD16 replicated FB write message only works if we don't need the
color calculator to mask our framebuffer writes. Previously, we bailed
on it if color_mask wasn't <true, true, true, true>. However, this was
needlessly strict for formats with fewer than four components - only the
components that actually exist matter.
WebGL Aquarium attempts to clear a BGRX texture with the ColorMask set
to <true, true, true, false>. This will work perfectly fine with the
replicated data message; we just bailed unnecessarily.
Improves performance of WebGL Aquarium on Iris Pro (at 1920x1080) by
abound 50%, and Bay Trail (at 1366x768) by over 70% (using Chrome 24).
v2: Use _mesa_format_has_color_component() to properly handle ALPHA
formats (and generally be less fragile).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Dylan Baker <baker.dylan.c@gmail.com>
WebGL Aquarium in Chrome 24 actually hits this.
v2: Move to core Mesa (wisely suggested by Ian); only consider
components which actually exist.
v3: Use _mesa_format_has_color_component to determine whether components
actually exist, fixing alpha format handling.
v4: Add a comment, as requested by Brian. No actual code changes.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Dylan Baker <baker.dylan.c@gmail.com>
When considering color write masks, we often want to know whether an
RGBA component actually contains any meaningful data. This function
provides an easy way to answer that question, and handles luminance,
intensity, and alpha formats correctly.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Dylan Baker <baker.dylan.c@gmail.com>
This gets us equivalent code paths on BDW and pre-BDW, except for stencil
(where we don't have MSAA stencil resolve code yet)
Improves MSAA-forced citybench by 7.94496% +/- 2.38429% (n=16). Reduces
DRI2 MSAA glxgears performance by -12.3559% +/- 1.52845% (n=9).
v2: Move the new meta code to brw_meta_updownsample.c, name it
brw_meta_updownsample(), add a comment about
intel_rb_storage_first_mt_slice(), and rename that function and move
the RB generation into it (review ideas by Ken).
v3: Fix 2 src vs dst pasteos in previous change.
v4: Skip this path pre-gen8 for now, until we can analyze the glxgears
performance delta some more.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Now that BindRenderbufferTexImage() is a thing that drivers can do, winsys
FBOs *can* have NeedsFinishRenderTexture set.
v2: Keep the short-circuit for non-BindRenderbufferTexImage() drivers
(review by Ken).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Even if the singlesample_mt got reopened from DRI due to
pageflipping/buffer swapping, our private miptree shouldn't need any
changes.
Improves performance of a little swapbuffers-loving microbenchmark with
MSAA forced on, by 1.2371% +/- 0.624802% (n=102)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The formatting was weird, and the tests were duplicated, and it is
guaranteed that mt->region exists.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Fixes a memory leak with MSAA winsys buffers since my move of
singlesample_mt to the rb in 4e0924c5de
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Sometimes it would be nice to benchmark some app with MSAA versus not, but
it doesn't offer the controls you want. Just provide a handy knob to
force the issue.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
For each write, search previous instructions for unread writes to the
flag register and remove them. Note that this will not eliminate the
last unread write.
total instructions in shared programs: 788074 -> 788004 (-0.01%)
instructions in affected programs: 4930 -> 4860 (-1.42%)
Reviewed-by: Eric Anholt <eric@anholt.net>
With an awful O(n^2) algorithm that searches previous instructions for
dead writes.
total instructions in shared programs: 805582 -> 788074 (-2.17%)
instructions in affected programs: 144561 -> 127053 (-12.11%)
Reviewed-by: Eric Anholt <eric@anholt.net>
That is, modify
mad dst, a, b, c
to be
mad dst.xyz, a, b, c
if dst.w is never read.
total instructions in shared programs: 811869 -> 805582 (-0.77%)
instructions in affected programs: 168287 -> 162000 (-3.74%)
Reviewed-by: Eric Anholt <eric@anholt.net>
A future patch adds support for removing dead writes to the flag
register. This patch simplifies the logic until then.
total instructions in shared programs: 811813 -> 811869 (0.01%)
instructions in affected programs: 3378 -> 3434 (1.66%)
Reviewed-by: Eric Anholt <eric@anholt.net>
To be consistent with the fs backend. Also the instruction scheduler
incorrectly considered SEL with a conditional modifier to read the flag
register.
Reviewed-by: Eric Anholt <eric@anholt.net>
The ARB_framebuffer_object spec lists this case before the
FRAMEBUFFER_INCOMPLETE_DRAW_BUFFER and
FRAMEBUFFER_INCOMPLETE_READ_BUFFER cases.
Fixes two broken cases in piglit's fbo-incomplete test, if
ARB_ES2_compatibility is not advertised. (If it is, this is masked
because the FRAMEBUFFER_INCOMPLETE_DRAW_BUFFER /
FRAMEBUFFER_INCOMPLETE_READ_BUFFER cases are removed by that extension)
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Brian Paul <brianp@vmware.com>
GL_INTENSITY has never been valid as a pixel format -- to get the memcpy
pack/unpack paths, the app needs to specify GL_RED as the pixel format
(or GL_RED_INTEGER for the integer formats).
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Brian Paul <brianp@vmware.com>
With shared glx contexts it is possible that a texture is create and used
in one context and then used in another one resulting in incorrect
sampler view usage.
v2: avoid template copy
v3: add XXX comment
Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: "10.0 10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
This reverts commit 2919c3fdb4.
For formats like BGRX, looping through 0..num_components works fine.
But for formats like XRGB, we'd check the color mask for X and fail to
check it for B.
The SIMD16 replicated FB write message only works if we don't need the
color calculator to mask our framebuffer writes. Previously, we bailed
on it if color_mask wasn't <true, true, true, true>. However, this was
needlessly strict for formats with fewer than four components - only the
components that actually exist matter.
WebGL Aquarium attempts to clear a BGRX texture with the ColorMask set
to <true, true, true, false>. This will work perfectly fine with the
replicated data message; we just bailed unnecessarily.
Improves performance of WebGL Aquarium on Iris Pro (at 1920x1080) by
abound 40%, and Bay Trail (at 1366x768) by over 70% (using Chrome 24).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Tested-by: Dylan Baker <baker.dylan.c@gmail.com>
Currently, we don't use this path on Sandybridge because we suspect
other paths will be faster. But we potentially could. If we do, we
should allow it to support Y-tiled BLTs.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Tested on ILK and CTG (with the GL3isms taken out of the piglits).
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The conversion code for srgb was tuned for n x 4x8bit AoS -> 4 x nxfloat SoA
(and vice versa), fix this to handle also 16bit 565-style srgb formats.
Still not really all that generic, things like r10g10b10a2_srgb or
r4g4b4a4_srgb wouldn't work (the latter trivial to fix, the former would not
require more work to not crash but near certainly need some higher precision
calculation) but not needed right now.
The code is not fully optimized for this (could use more direct calculation
instead of expanding to 8-bit range first) but should be good enough.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
GL generally doesn't seem to allow srgb formats with less (or more) than 8 bit
for the rgb channels, though some hw could easily do it (typically for formats
with up to 10 bits for the rgb channels, at least for formats with less than 8
bits support is likely widespread even). While it may be true there aren't
really any benefits for such formats, we need for it for d3d, though luckily
only for b5g6r5_srgb it seems.
So add this format along with the util code for conversion - since that util
code is heavily tuned for 8bit srgb this isn't really all that well optimized
and rounding doesn't seem right but at least it should give some halfway
meaningful results.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
The nvc0 texfetch instruction expects the sample id to be in the second
source (usually used for the offset) rather than as part of the texture
coordinate.
This fixes all the sampler2DMS/Array tests on nvc0.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Christoph Bumiller <e0425955@student.tuwien.ac.at>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
This fallback to triangle strips is silly and should be done in drivers
if they need it.
This should fix the case when quad strips are used with flatshading that is
enabled by the "flat" GLSL varying modifier. It also fixes primitive restart
for quad strips.
This fixes piglit:
NV_primitive_restart/primitive-restart-draw-mode-quad_strip
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Brian Paul <brianp@vmware.com>
The last changes to it are from 2008 and 2009.
It doesn't support most texture formats and some texture targets.
Nobody can possibly be using this.
Reviewed-by: Brian Paul <brianp@vmware.com>
This code is a slightly modified version of evergreen_dma_blit (and
evergreen_dma_copy as well as evergreen_dma_copy_tile).
It would be nice to share some of the code in the long term.
I have reused some "cik"-prefixed functions that also return the right
value for SI. I am not sure if they should be renamed.
v2: Marek> removed gfx.flush in si_dma_copy_tile
Signed-off-by: Niels Ole Salscheider <niels_ole@salscheider-online.de>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
The AoS version of ld_build_blend_factor was assuming that if the first
channel was alpha, there were no rgb components.
Fixes glean/blendFunc on System z. No piglit regressions on x86_64.
The shortcut is still used in tests like spec/ARB_framebuffer_object/
fbo-alpha.
Signed-off-by: Richard Sandiford <rsandifo@linux.vnet.ibm.com>
libdl does not exist on many platforms which have dlopen in libc.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
In the gallium code, the assert() macro could come from either the
system's assert.h file (via c11/threads.h) or from gallium's u_debug.h.
It looks like all known assert.h files unconditionally #undef assert
before defining their own version. So the assert you get depends on
whether threads.h or u_debug.h was included last.
In the gallium code we really want to use the assert() from u_debug.h
(it behaves better on Windows). In gallium, c11/threads.h is only
included after u_debug.h in the os_thread.h wrapper. So Adding
an #ifndef assert test in the threads*.h files avoids using the system's
assert().
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
EXT_packed_depth_stencil is supported by all drivers, but
ARB_depth_texture isn't (notably nouveau_vieux). This should avoid
passing unexpected values down to ChooseTextureFormat.
The EXT_packed_depth_stencil spec does not make any explicit references
to requiring ARB_depth_texture in order to allow textures with that
format, however if there is no dependency, ARB_depth_texture would be
practically implied by the extension.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "10.0 10.1" <mesa-stable@lists.freedesktop.org>
Note for 10.0 backport: This will produce a conflict, the solution is to
move the surrounding if as well.
In all uses of dotlike() we're writing generic code that operates on 1-4
component vectors. That our IR requires ir_binop_dot expressions'
operands to be 2+ component vectors is an implementation detail that's
not important when implementing built-in functions with dot(), which is
defined for scalar floats in GLSL.
Reviewed-by: Eric Anholt <eric@anholt.net>
ARB_gpu_shader5 and ES 3.0 expose different subsets of
ARB_shading_language_packing.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Volume 4, part 1 of the Ivybridge PRM says, "Generally, the EWA
approximation algorithm results in higher image quality than the legacy
algorithm." Using a classic anisotropic filtering "tunnel" demo, it
appears that there is *no* anisotropic filtering on IVB without this bit
set.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
I meant to include this fixes in v3 of commit
de7ad2c88f, but accidentally pushed a
previous version.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Sadly, we can't use actual ALIGN(), since that only supports
power-of-two values for the alignment parameter.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Register sets depend on the particular hardware generation, but don't
depend on anything in the actual OpenGL context. Computing them is
fairly expensive, and they take up a large amount of memory. Putting
them in the screen allows us to compute/allocate them once for all
contexts, saving both time and space.
Improves the performance of a context creation/destruction
microbenchmark by about 3x on my Haswell i7-4750HQ.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
This will allow us to use the screen as a memory context.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
This one saves about 2MB peak allocation in glsl-fs-algebraic-add-add-1,
with no performance difference on timing short shader-db runs (n=9/10,
warmup outlier removed).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This isn't the GL API, so there's no reason to use GLboolean.
Using bool is safer: any non-zero value is treated as "true". When
converting a value to a GLboolean, all but the low byte is discarded,
which means that values like 256 will be incorrectly rendered as false.
Done via the following vim commands:
:%s/GLboolean/bool/g
:%s/GL_TRUE/true/g
:%s/GL_FALSE/false/g
and one line of manual whitespace tidying.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Ideally, we'd like to never even attempt the SIMD16 compile if we could
know ahead of time that it won't succeed---it's purely a waste of time.
This is especially important for state-based recompiles, which happen at
draw time.
The fragment shader compiler has a number of checks like:
if (dispatch_width == 16)
fail("...some reason...");
This patch introduces a new no16() function which replaces the above
pattern. In the SIMD8 compile, it sets a "SIMD16 will never work" flag.
Then, brw_wm_fs_emit can check that flag, skip the SIMD16 compile, and
issue a helpful performance warning if INTEL_DEBUG=perf is set. (In
SIMD16 mode, no16() calls fail(), for safety's sake.)
The great part is that this is not a heuristic---if the flag is set, we
know with 100% certainty that the SIMD16 compile would fail. (It might
fail anyway if we run out of registers, but it's always worth trying.)
v2: Fix missing va_end in early-return case (caught by Ilia Mirkin).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz> [v1]
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> [v1]
Reviewed-by: Eric Anholt <eric@anholt.net>
This is just a matter of reusing the pull/push constant information set
up by the SIMD8 compile.
This gains us 78 SIMD16 programs in shader-db.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Now that we don't renumber uniform registers, assign_constant_locations
and move_uniform_array_access_to_pull_constants use the same names.
So, they can share a single copy of the pull_constant_loc[] array.
This simplifies the code considerably. assign_constant_locations()
doesn't need to walk through pull_params[] to rediscover reladdr
demotions; it just has that information in pull_constant_loc[]. We also
only need to rewrite the instruction stream once, instead of twice.
Even better, we now have a single array describing the layout of
all pull parameters, which we can pass to the SIMD16 program.
This actually hurts a few shaders in Serious Sam 3, and one in KWin:
total instructions in shared programs: 1841957 -> 1842035 (0.00%)
instructions in affected programs: 1165 -> 1243 (6.70%)
Comparing dump_instructions() before and after the pull constant
transformations with and without this patch, it appears that there is
a uniform array with variable indexing (reladdr) and constant indexing
(of array element 0). Previously, we uploaded array element 0 as both
a pull constant (for reladdr) /and/ a push constant.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Previously, remove_dead_constants() would renumber the UNIFORM registers
to be sequential starting from zero, and the resulting register number
would be used directly as an index into the params[] array.
This renumbering made it difficult to collect and save information about
pull constant locations, since setup_pull_constants() and
move_uniform_array_access_to_pull_constants() used different names.
This patch generalizes setup_pull_constants() to decide whether each
uniform register should be a pull constant, push constant, or neither
(because it's unused). Then, it stores mappings from UNIFORM register
numbers to params[] or pull_params[] indices in the push_constant_loc
and pull_constant_loc arrays. (We already did this for pull constants.)
Then, assign_curb_setup() just needs to consult the push_constant_loc
array to get the real index into the params[] array.
This effectively folds all the remove_dead_constants() functionality
into assign_constant_locations(), while being less irritable to work
with.
v2: Add assert(remapped <= i), requested by Topi.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
move_uniform_array_access_to_pull_constants() and setup_pull_constants()
both have two parts:
1. Decide which UNIFORM registers to demote to pull constants, and
assign locations.
2. Mechanically rewrite the instruction stream to pull the uniform
value into a temporary VGRF and use that, eliminating the UNIFORM
file access.
In order to support pull constants in SIMD16 mode, we will need to make
decisions exactly once, but rewrite both instruction streams.
Separating these two tasks will make this easier.
This patch introduces a new helper, demote_pull_constants(), which
takes care of rewriting the instruction stream, in both cases.
For the moment, a single invocation of demote_pull_constants can't
safely handle both reladdr and non-reladdr tasks, since the two callers
still use different names for uniforms due to remove_dead_constants()
remapping of things. So, we get an ugly boolean parameter saying
which to do. This will go away.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
When demoting a variably indexed uniform array to pull constants, we
only recorded the location for the base of the array (element 0).
Recording locations for all array elements is a trivial amount of code
and will make subsequent refactoring easier.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Previously, both move_uniform_array_access_to_pull_constants() and
setup_pull_constants() maintained stack-local arrays with this
information. Storing this information will allow it to be used from
multiple functions, allowing us to split and move code around.
We'll also eventually want to pass pull constant location information
to the SIMD16 compile. Saving this information will help us do that.
Unfortunately, the two functions *cannot* share the contents of the
array just yet. remove_dead_constants() renumbers all the UNIFORM
registers to be contiguous starting at zero, so the two functions
talk about uniforms using different names. We can't even remap them,
since move_uniform_array_access_to_pull_constants() deletes UNIFORM
registers that are only accessed with reladdr, so remove_dead_constants
can't even see them.
This situation will improve in the next few patches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
The SIMD8 compile will determine whether pull parameters are necessary.
If so, it will set prog_data->nr_pull_params to a value greater than 0.
brw_wm_fs_emit checks if nr_pull_params > 0 and skips the SIMD16 compile
altogether. So, this code should never occur.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
To emphasize that the result is floating point 1.0 or 0.0, to match
other opcodes like SLE and SEQ.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Handle mapping edgeflag data similar to the code around it.
This fixes a crash in piglit test gl-2.0-edgeflag.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Enable EGL_EXT_platform_base and the Linux platform extensions layered
atop it: EGL_EXT_platform_x11, EGL_EXT_platform_wayland,
and EGL_MESA_platform_gbm.
Tested with Piglit's EGL_EXT_platform_base tests under an X11 session.
To enable running the Wayland and GBM tests, windowed Weston was running
and the kernel had render nodes enabled.
I regression tested my EGL_EXT_platform_base patch set with Piglit on
Ivybridge under X11/EGL, standalone Weston, and GBM with rendernodes. No
regressions found.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
From the EGL_EXT_wayland_spec, version 3:
It is not valid to call eglCreatePlatformPixmapSurfaceEXT with a <dpy>
that belongs to Wayland. Any such call fails and generates
EGL_BAD_PARAMETER.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
From the EGL_MESA_platform_gbm spec, version 5:
It is not valid to call eglCreatePlatformPixmapSurfaceEXT with a <dpy>
that belongs to the GBM platform. Any such call fails and generates
EGL_BAD_PARAMETER.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Internally, much of the EGL code uses EGLNativeDisplayType,
EGLNativeWindowType, and EGLPixmapType. However, the EGLNative type
often does not match the variable's actual type.
The concept of EGLNative types are a bad match for Linux, as explained
below. And the EGL platform extensions don't use EGLNative types at all.
Those extensions attempt to solve cross-platform issues by moving the
EGL API away from the EGLNative types.
The core of the problem is that eglplatform.h can define each EGLNative
type once only, but Linux supports multiple EGL platforms.
To work around the problem, Mesa's eglplatform.h contains multiple
definitions of each EGLNative type, selected by feature macros. Mesa
expects EGL clients to set the feature macro approrpiately. But the
feature macros don't work when a single codebase must be built with
support for multiple EGL platforms, *such as Mesa itself*.
When building libEGL, autotools chooses the EGLNative typedefs based on
the first element of '--with-egl-platforms'. For example,
'--with-egl-platforms=x11,drm,wayland' defines the following:
typedef Display* EGLNativeDisplayType;
typedef Window EGLNativeWindowType;
typedef Pixmap EGLNativePixmapType;
Clearly, this doesn't work well for Wayland and GBM. Mesa works around
the problem by casting the EGLNative types to different things in
different files.
For sanity's sake, and to prepare for the EGL platform extensions, this
patch removes from egl/main and egl/dri2 all internal use of the
EGLNative types. It replaces them with 'void*' and checks each explicit
cast with a static assertion. Also, the patch touches egl_gallium the
minimal amount to keep it compatible with eglapi.h.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::create_image, set it for each platform, and
let egl_dri2 dispatch eglCreateImageKHR to that.
To remove ambiguity, rename egl_dri2.c:dri2_create_image() to
dri2_create_image_from_dri().
This prepares for the EGL platform extensions.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
dri2_initialize_x11_swrast() does a strange thing. For some extensions
it doesn't support, it sets the corresponding functions in
_EGLDriver::API to NULL. The intention here is clear, but misplaced.
NULL or not, the function pointers never get called because their
extensions aren't supported.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::create_wayland_buffer_from_image, set it for
each platform, and let egl_dri2 dispatch
eglCreateWaylandBufferFromImageWL to that.
This prepares for the EGL platform extensions.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
egl_dri2.c:dri2_terminate() handled terminating X11 and DRM displays.
The Wayland platform implemented its own dri2_wl_terminate(), which was
nearly a copy of the common one.
To implement the EGL platform extensions, we either need to dispatch
eglTerminate per display or define a common implementation for all
platforms. This patch chooses consolidation. It removes
dri2_wl_terminate() by folding it into the common dri2_terminate().
It was necessary to invert the `if (disp->PlatformDisplay == NULL)` and
the switch statement because, unlike DRM and X11, Wayland's terminator
performed action even when EGL didn't own the native display. In the
inversion, I replaced `disp->PlatformDisplay == NULL` with
`dri2_dpy->own_device` because the two expressions are synonymous, but
the latter's meaning is clearer.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
When the user calls eglGetDisplay(EGL_DEFAULT_DISPLAY), the Wayland and
DRM platforms set dri2_dpy->own_device=true. This patch makes the X11
platform do the same for consistency.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::post_sub_buffer, set it for each
platform, and let egl_dri2 dispatch eglPostSubBufferNV to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::swap_buffers_region, set it for each
platform, and let egl_dri2 dispatch eglSwapBuffersRegionNOK to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::copy_buffers, set it for each
platform, and let egl_dri2 dispatch eglCopyBuffers to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::query_buffer_age, set it for each
platform, and let egl_dri2 dispatch API.QueryBufferAge to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::destroy_surface, set it for each
platform, and let egl_dri2 dispatch eglDestroySurface to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::create_pbuffer_surface, set it for each
platform, and let egl_dri2 dispatch eglCreatePbufferSurface to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::create_pbuffer_surface, set it for each
platform, and let egl_dri2 dispatch eglCreatePixmapSurface to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::create_window_surface, set it for each
platform, and let egl_dri2 dispatch eglCreateWindowSurface to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::swap_buffers_with_damage, set it for each
platform, and let egl_dri2 dispatch eglSwapBuffersWithDamageEXT to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::swap_buffers, set it for each platform, and
let egl_dri2 dispatch eglSwapBuffers to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::swap_interval, set it for each platform, and
let egl_dri2 dispatch eglSwapInterval to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Don't call it through the driver dispatch table. Just call it
statically.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Each of the egl_dri2 platforms (except Android) prefix their function
names with "dri2", not "dri2_${platform}". This means many function
names have three separate definitions in the egl_dri2 directory: one in
each of platform_drm.c, platform_wayland.c, and platform_x11.c. For
example, each of the three files defines dri2_create_window_surface().
The name collisions make it difficult to review patches for correctness
("Is this patch hunk calling a platform_x11 function or a global
egl_dri2 function?"), complicate debugging, and confuse code navigation
tools.
For each function in platform_x11.c prefixed with 'dri2', this patch
changes its prefix to 'dri2_x11'. Likewise for platform_drm.c and
'dri2_drm'; and platform_wayland.c and 'dri2_wl'.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
dri2_egl_display has only one virtual function, 'authenticate'. Define
dri2_egl_display::vtbl and move 'authenticate' there.
This prepares for the EGL platform extensions, which will add many
more virtual functions to dri2_egl_display.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
This pulls in EGL_EXT_platform_base, EGL_EXT_platform_wayland,
EGL_EXT_platform_x11, and EGL_MESA_platform_gbm.
This patch has a lot of churn because Khronos recently changed its
method of generating headers. Khronos now generates it headers from XML.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
This allows retrieving the existing BO and incrementing its reference count,
instead of creating a separate winsys representation for it, when the kernel
reports that the BO was already assigned a virtual memory address.
This fixes problems with XWayland using radeonsi and the
xf86-video-wlglamor driver, which calls GEM flink outside of the radeon
winsys code and creates BOs from the flinked names using the same DRM file
descriptor.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
install-gallium-links.mk fails to create the compat link for ilo_dri.so
because it looks for dri_LTLIBRARIES instead of noinst_LTLIBRARIES. Fix this
by switching to dri_LTLIBRARIES (and make the driver installable).
Since pci_id_driver_map.h and the DDX both tell libGL.so to look for "i965",
ilo_dri.so will never be loaded even enabled and installed. The change should
not create any more confusion.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
The GL 4.4 spec says it's not color-renderable and not accepted
by RenderBufferStorage. The EXT_texture_shared_exponent spec says
it's not color-renderable but it's accepted by RenderBufferStorageEXT.
This seems to be a bug in the extension spec.
Let's do what GL 4.4 says.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
We can just check the polygon mode when updating the edge flag state.
Also, we can just flag ST_NEW_VERTEX_PROGRAM directly, which makes
ST_NEW_EDGEFLAGS_DATA useless.
Normally, nothing uses live intervals at this point, so this isn't
necessary. However, dump_instructions() calculates them and uses them
to show register pressure. So, calling dump_instructions() in this area
of the code would segfault due to the arrays being the wrong size.
This is not a candidate for stable branches because it only serves to
fix internal debugging code that you manually have to invoke by altering
the source code or using gdb.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Previously, dump_instruction() would print output such as:
{ 2} 3: mov vgrf1:F, u0:F
{ 3} 4: mov vgrf7:F, u0:F
{ 4} 5: mov vgrf8:F, u0:F
which looked like either a scalar access or perhaps a constant-indexed
access of element 0, when it was really a variable index.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
In commit e57d77280e, I fixed this for
destinations in the Vec4 backend, and sources in the scalar backend.
But not both types in both backends.
To prevent this mess from continuing, make the reg_encoding table
static, so only the disassembler can use it.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
opt_saturate_propagation_local compares scan_inst->dst.reg/reg_offset
with inst->src[0].reg/reg_offset, and ensures that scan_inst->dst.file
is GRF. But nothing ensured that inst->src[0].file was GRF.
In the following program, this resulted in u1:F matching vgrf1:UW,
and a saturate being incorrectly propagated from instruction 8 to
instruction 1.
{ 1} 0: add vgrf0:UW, hw_reg1+8:UW, hw_reg0:V
{ 1} 1: add vgrf1:UW, hw_reg1+10:UW, hw_reg0:V
{ 1} 2: linterp vgrf6:F, hw_reg2:F, hw_reg3:F, hw_reg0:F
{ 2} 3: linterp vgrf27:F, hw_reg2:F, hw_reg3:F, hw_reg0+16:F
{ 4} 4: mov vgrf10+0.0:F, vgrf6:F
{ 3} 5: mov vgrf10+1.0:F, vgrf27:F
{ 6} 6: tex vgrf8+0.0:F, vgrf10+0.0:F
{ 5} 7: mov vgrf32:F, u1:F
{ 5} 8: mov.sat vgrf12:F, u1:F
From shader-db:
total instructions in shared programs: 1841932 -> 1841957 (0.00%)
instructions in affected programs: 5823 -> 5848 (0.43%)
I inspected two of the 25 hurt shaders, and concluded that they were
both hitting this bug, and not legitimately optimized.
This fixes bugs in Left 4 Dead 2 and Team Fortress 2, possibly among
others. The optimization pass didn't exist in 10.0, so this is only
a candidate for 10.1.
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
It turns out we can allow COHERENT storage/mappings all the time,
regardless of LLC vs non-LLC. It just means never using temporary
mappings to avoid GPU stalls, and on non-LLC we have to use the GTT intead
of CPU mappings. If we were to use CPU maps on non-LLC (which might be
useful if apps end up using buffer_storage on PBO reads, to avoid WC read
slowness), those would be PERSISTENT but not COHERENT, but doing that
would require us driving the clflushes from userspace somehow.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
It looks like there's no big difference for write-only workloads, but
using a CPU map means that if they happen to read without having set the
MAP_READ_BIT, they get 100x the performance for those reads.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
While in expected usage patterns nobody will ever hit this path, doubling
our bandwidth used seems like a waste, and it cost us extra code too.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
On LLC, it should always be better to use a cached mapping than the GTT.
On non-LLC, it seems pretty silly to try to optimize read performance for
the INVALIDATE_RANGE_BIT case. This will make the buffer_storage logic
easier.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Similar to the other cases, shift some weight/coord calculations to int
space. This should be slightly faster (on x86 sse it should actually safe one
instruction, and generally int instructions are cheaper).
The previous code used coords which were calculated as
(int) (f_coord * tex_size * 256) >> 8.
This is not only unnecessarily complex but can give the wrong texel due to
rounding for negative coords (as an example, after denormalization coords
from -1.0 to 0.0 should give -1, but this will give -1 for numbers from
-1.0-1/256 - 0.0-1/256.
Instead, juse use ifloor, dropping the shift stuff.
Unfortunately, this will most likely be slower - with arch rounding available
it shouldn't be too bad (trades a int shift for a round but also saves an int
mul (which is shared by all coords) but otherwise it's a mess.
The previous method for converting coords to ints was sligthly inaccurate
(effectively losing 1bit from the 8bit lerp weight). This is probably
especially noticeable when trying to draw a pixel-aligned texture.
As an example, for a 100x100 texture after dernormalization the texture
coords in this case would turn up as
0.5, 1.5, 2.5, 3.5, 4.5, ...
After the mul by 256, conversion to int and 128 subtraction, they end up as
0, 256, 512, 768, 1024, ...
which gets us the correct coords/weights of
0/0, 1/0, 2/0, 3/0, 4/0, ...
But even LSB errors (which are unavoidable) in the input coords may cause
these coords/weights to be wrong, e.g. for a coord of 3.49999 we'd get a
coord/weight of 2/255 instead.
Fix this by using round-to-nearest int instead of FPToSi (trunc). Should be
equally fast on x86 sse though other archs probably suffer a little.
Constify the offsets parameter to silence gcc warning 'assignment
from incompatible pointer type' due to function prototype miss-match.
Use a boolean changed as a shorthand for target != current_target.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
There is little point of continuing if fread returns zero, as it
indicates that either the file is empty or cannot be read from.
Bail out if fread returns zero after closing the file.
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Core drm defines that the handle is of type int, while all drivers
treat it as uint internally. Typecast the value to silence gcc
warning messages and be consistent amongst all drivers.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Commit 3805a864b1d(nv50: assert before trying to out-of-bounds access
samplers) introduced a series of asserts as a precausion of a previous
illegal memory access.
Although it failed to encapsulate loop within nv50_sampler_state_delete
effectively failing to clear the sampler state, apart from exadurating
the illegal memory access issue.
Fixes gcc warning "array subscript is above array bounds" and
"Nesting level does not match indentation" and "Out-of-bounds read"
defects reported by Coverity.
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
v2: Indent according to Mesa style, reuse sbc instead of making a new
swap_count field, and actually get a usable back before returning the
age of the back (fixing updated piglit tests). Changes by anholt.
Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com>
Reviewed-by: Robert Bragg <robert@sixbynine.org> (v1)
Reviewed-by: Adel Gadllah <adel.gadllah@gmail.com> (v2)
Reviewed-by: Eric Anholt <eric@anholt.net>
With the buffer_age code, I need to be able to potentially call this more
than once per frame, and it would be bad if a new special event showing up
meant I chose a different back mid-frame. Now, once we've chosen a back
for the frame, another find_back will choose it again since we know that
it won't have ->busy set until swap.
Note that this makes find_back return a buffer id instead of a backbuffer
index. That's kind of a silly distinction anyway, since it's an identity
mapping between the two (it's the front buffer that is at an offset).
Reviewed-By: Adel Gadllah <adel.gadllah@gmail.com>
This extension provides a way for an application to render to multiple
surfaces with different buffer formats without having to use multiple
contexts. An EGLContext can be created without an EGLConfig by passing
EGL_NO_CONFIG_MESA. In that case there are no restrictions on the surfaces
that can be used with the context apart from that they must be using the same
EGLDisplay.
_mesa_initialze_context can now take a NULL gl_config which will mark the
context as ‘configless’. It will memset the visual to zero in that case.
Previously the i965 and i915 drivers were explicitly creating a zeroed visual
whenever 0 is passed for the EGLConfig. Mesa needs to be aware that the
context is configless because it affects the initial value to use for
glDrawBuffer. The first time the context is bound it will set the initial
value for configless contexts depending on whether the framebuffer used is
double-buffered.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
In eglCreateContext there is a check for whether the config parameter is zero
and in this case it will avoid reporting an error if the
EGL_KHR_surfacless_context extension is supported. However there is nothing in
that extension which says you can create a context without a config and Mesa
breaks if you try this so it is probably better to leave it reporting an
error.
The original check was added in b90a3e7d8b based on the API-specific
extensions EGL_KHR_surfaceless_opengl/gles1/gles2. This was later changed to
refer to EGL_KHR_surfacless_context in b50703aea5. Perhaps the original
extensions specified a configless context but the new one does not.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Under GLES 3 it is not valid to pass GL_FRONT to glDrawBuffers. Instead,
GL_BACK has a magic interpretation which means it will render to the front
buffer on single-buffered contexts and the back buffer on double-buffered. We
were incorrectly setting the initial value to GL_FRONT for single-buffered
contexts. This probably doesn't really matter at the moment except that
presumably it would be exposed in the API via glGetIntegerv.
When we switch to configless contexts this is more important because in that
case we always want to rely on the magic interpretation of GL_BACK in order to
automatically switch between the front and back buffer when a new surface with
a different number of buffers is bound. We also do this for GLES 1 and 2
because the internal value doesn't matter in that case and it is convenient to
use the same code to have the magic interpretation of GL_BACK.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
In GLES 3 it is not possible to select rendering to the front buffer and
instead selecting GL_BACK has the magic interpretation that it is either the
front buffer on single-buffered configs or the back buffer on double-buffered.
GLES 1 and 2 have no way of selecting the draw buffer at all. In that case we
were initialising the draw buffer to either GL_FRONT or GL_BACK depending on
the context's config and then leaving it at that.
When we switch to having configless contexts we ideally want Mesa to
automatically switch between the front and back buffer whenever a double-
or single-buffered surface is bound. To make this happen we can just allow
the magic behaviour from GLES 3 in GLES 1 and 2 as well. It shouldn't matter
what the internal value of the draw buffer is in GLES 1 and 2 because there
is no way to query it from the external API.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Commit 6e8d04a caused a leak by allocating ctx->Debug but never freeing it.
Release the memory in _mesa_free_errors_data when destroying a context.
Use FREE to match CALLOC_STRUCT from _mesa_get_debug_state.
Reviewed-by: Brian Paul <brianp@vmware.com>
The few paths that were playing with framebuffers and renderbuffer were
saving and restoring them.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This was being applied in a subset of the places that
intel_prepare_render() was called, to set the same flag that
intel_prepare_render() was setting.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The flag wasn't getting updated correctly when the ctx->DrawBuffer or
ctx->ReadBuffer changed. It usually ended up working out because most
apps only have one window system framebuffer, or if they have more than
one and they have any front read/drawing, they will have called
glReadBuffer()/glDrawBuffer() on it when they get started on the new
buffer.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
It's the ctx->ReadBuffer that gets read from, not the ctx->DrawBuffer.
So, if you happened to have a ctx->ReadBuffer that was the winsys buffer,
and it had previously been intel_prepare_render()ed but not invalidated
since then, and you called glReadBuffer() to switch to front buffer
instead of back buffer reading on the winsys fbo while your drawbuffer was
a user FBO, you'd never get the front buffer's miptree fetched, and
segfault.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
I think these are all equivalent to vertex buffer fetches which should be
dword-aligned. Scalar loads are also dword-aligned.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Buffers are disabled by VGT_STRMOUT_BUFFER_CONFIG, but the query only works
if VGT_STRMOUT_CONFIG.STREAMOUT_0_EN is enabled.
This moves VGT_STRMOUT_CONFIG to its own state. The register is set to 1
if either streamout or the primitives-generated query is enabled.
However, the primitives-emitted query is also incremented, so it's disabled
by setting VGT_STRMOUT_BUFFER_SIZE to 0 when there is no buffer bound.
This fixes piglit:
ARB_transform_feedback2/counting with pause
EXT_transform_feedback/primgen-query transform-feedback-disabled
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
When doing fast clear for single-sample color buffers for the first time,
a CMASK buffer has to be allocated and the CMASK state in all pipe_surfaces
referencing the color buffer must be updated. Updating all surfaces is kinda
silly, so let's move the values to r600_texture instead.
This is only for Evergreen and later. R600-R700 don't have fast clear.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
This looks like r600g. The shared Cayman MSAA code is used here.
The real motivation for this is that I need the ability to change values
of color registers after the framebuffer state is set. The PM4 state cannot
be modified easily after it's generated. With this, I can just change
r600_surface::cb_color_xxx and set framebuffer.atom.dirty=true and it's done.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Fixes the following build error on OpenBSD:
./.libs/libglsl.a(builtin_functions.o)(.text+0x973): In function `mtx_lock':
../../include/c11/threads_posix.h:195: undefined reference to `pthread_mutex_lock'
./.libs/libglsl.a(builtin_functions.o)(.text+0x9a5): In function `mtx_unlock':
../../include/c11/threads_posix.h:248: undefined reference to `pthread_mutex_unlock'
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Brian Paul <brianp@vmware.com>
Static and shared builds were possible in the good old days
of static makefiles. Currently the build system does not
distinguish nor does anything special when one requests a
static build.
Print a warning message for the packager that static builds
are not supported and continue building shared libs.
Currently only Debian and derivatives use static build, and
they use it for building a Xlib powered libGL. This patch
will only change the warning message they are seeing but
the binaries produced will be identical.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
- As of commit cb080a10b68(configure.ac: Don't require shared LLVM when
building OpenCL) opencl does not mandate using shared llvm.
- Add a warning message that building with static llvm may cause
compilation problems.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
- xf86dri.h is the old dri1 header, not required by dri2 nor dri3
- fold xf86drm.h inclusiong inside dri2.h
- dri3_glx does not have any drm specific dependencies
- glapi.h is not required by the dri2 and dri3 codepaths
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Recent commit fixed build issues in dri2_query_renderer.c by
wrapping in defined(direct_rendering) && !defined(applegl)
This patch targets the query_renderer tests, so that make check
passes on platforms such as hurd and cygwin.
v2: (Emil)
- Rebase and update commit message.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Some platforms different library extension - dll, dylib, a.
Honor that when we are creating the required links.
Rename LIB_EXTENSION to LIB_EXT while we're here.
With libglapi linking aside, building classic drivers on
non-linux platforms should be possible now.
v2: Resolve conflicts.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
In the cases where one links against the static glapi.la there
is no need to create temporary variables only to explicitly
link agaist it.
Instead use SHARED_GLAPI_LIB to explicitly indicate when one
is building and linking with the shared glapi provider.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
All the variables were used before the automake conversion
and do not make sense (nor are used) currently.
Replace GL_LIB_NAME with lib$(GL_LIB).$(LIB_EXTENSION) for
apple-glx. The build has been broken for ages, but this will
ease the recovery process as it happens.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
All three (xvmc and omx) do not have an alternative loading
similar to the dri modules. Thus one needs to explicitly install
them in order to use/test them.
v2:
- Keep vdpau targets, as an equivalent of LIBGL_DRIVERS_PATH
is being worked on.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
This helper script will be used to minimise the duplication
during link generation across all gallium targets.
v2:
- Handle vdpau_LTLIBRARIES. Requested by Christian König.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
There is little point in echoing everything that the script does
to stdout. Wrap it in AM_V_GEN so that a reasonable message is
printed as a indication of it's invocation.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
There is little gain in printing whenever a folder is created.
v2:
- Use $(AM_V_at) over @ to have control in verbose builds.
Suggested by Erik Faye-Lund.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
D3D10 allows setting of the internal offset of a buffer, which is
in general only incremented via actual stream output writes. By
allowing setting of the internal offset draw_auto is capable
of rendering from buffers which have not been actually streamed
out to. Our interface didn't allow. This change functionally
shouldn't make any difference to OpenGL where instead of an
append_bitmask you just get a real array where -1 means append
(like in D3D) and 0 means do not append.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The MESA_FORMAT_x enums in formats.h weren't declared in any sort
of reasonable order. Now it should be a little more logical.
This also required reordering tables in formats.c and s_texfetch.c
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Acked-by: Eric Anholt <eric@anholt.net>
There's no real reason to list all the formats in the comments.
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Removes unnecessary MOV instructions in L4D2, TF2, Dota2, and many other
Steam games.
total instructions in shared programs: 1668126 -> 1657509 (-0.64%)
instructions in affected programs: 242235 -> 231618 (-4.38%)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This keeps us from needing to reemit all the other stage state just
because a surface changed.
Improves unoptimized glamor x11perf -f8text by 1.10201% +/- 0.489869%
(n=296). [v1]
v2:
- Drop binding table packets from Gen8 unit state as well.
- Pass _3DSTATE_BINDING_TABLE_POINTERS_XS to brw_upload_binding_table,
cutting even more code.
v3: Don't forget to drop them from 3DSTATE_GS (botched refactor in v2).
Signed-off-by: Eric Anholt <eric@anholt.net> [v1]
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> [v1]
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org> [v2, v3]
Reviewed-by: Eric Anholt <eric@anholt.net> [v3]
This makes both the empty and non-empty binding table paths exit through
the bottom of the function, which gives us a place to share code.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Explicitly add radeon_drm_winsys_create and nouveau_drm_screen_create to
the dynamic list. This will ensure vdpau interop still works even when
the user links with -Bsymbolic-functions in hardened builds.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Tested-by: Rachel Greenham <rachel@strangenoises.org>
Reported-by: Peter Frühberger <peter.fruehberger@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
This reverts most of commit d80f0c34b7. Upon a
closer reading, having the presumed offsets written is not enough to set the
flag. EXEC_OBJECT_NEEDS_GTT and/or EXEC_OBJECT_WRITE of the reloc entries
must also be set appropriately.
Rename
intel_winsys_check_aperture_size() to intel_winsys_can_submit_bo(),
intel_bo_exec() to intel_winsys_submit_bo(), and
intel_winsys_decode_commands() to intel_winsys_decode_bo().
Make a semantic change to ignore intel_context when the ring is not the render
ring.
The only alloc flag is INTEL_ALLOC_FOR_RENDER, which can as well be expressed
by specifying the initial write domain. The change makes it obvious that we
failed to set INTEL_ALLOC_FOR_RENDER in several places.
Rename
intel_bo_emit_reloc() to intel_bo_add_reloc(),
intel_bo_clear_relocs() to intel_bo_truncate_relocs(), and
intel_bo_references() to intel_bo_has_reloc().
Besides, we need intel_bo_get_offset() only to get the presumed offset afer
adding a reloc entry. Remove the function and make intel_bo_add_reloc()
return the presumed offset. While at it, switch to gem_bo->offset64 from
gem_bo->offset.
Patch adds a remap table for uniforms that is used to provide a mapping
from application specified uniform location to actual location in the
UniformStorage. Existing UniformLocationBaseScale usage is removed as
table can be used to set sequential values for array uniform elements.
This mapping helps to implement GL_ARB_explicit_uniform_location so that
uniforms locations can be reorganized and handled in a more easy manner.
v2: small fixes + rename parameters for merge and split functions (Ian)
improve documentation, remove old check for location bounds (Eric)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Nothing uses this structure, removal fixes Klocwork error about
the possible oom condition in _mesa_symbol_table_iterator_ctor.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This logic is borrowed from the radeon code. The transfer logic will
only get called for PIPE_BUFFER resources, so it shouldn't be necessary
to worry about them becoming render targets.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Christoph Bumiller <e0425955@student.tuwien.ac.at>
It's only used in this one file as far as I can tell, and exporting a
symbol named 'devices' from a shared library is a recipe for trouble.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
When building out of tree, the file ends up dangling which
may result in a binary with the old git sha.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
That structure member is a pointer, so the loop with
the Elements macro only freed up the first entry.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
After preprocessing by glcpp all adjacent spaces were replaced by
single one and glsl parser received column-shifted shader source.
It negatively affected ast location set up and produced wrong error
messages for heavily-spaced shaders.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This patch fixes this SCons build error introduced with commit
70e7905608.
build/linux-x86_64-debug/mesa/libmesa.a(driverfuncs.os): In function `_mesa_init_driver_functions':
src/mesa/drivers/common/driverfuncs.c:99: undefined reference to `_mesa_meta_GenerateMipmap'
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
I don't know how many people care about this case, but it's easy enough
to do, so we may as well. The tricky part is that for some reason Mesa
stores the number of array slices in Height, not Depth.
I thought the easiest way to handle that here was to make Height = 1
(the actual height), and srcDepth = srcImage->Height. This requires
some munging when calling _mesa_prepare_mipmap_level, so I created a
wrapper that sorts it out for us.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This is largely a matter of looping over the number of slices/layers,
and not minifying depth (presumably that code exists for the unfinished
3D texture support).
Normally, I would have made the loop over array slices the outermost
loop. I suspect that would make it trickier to support 3D textures
someday, though, so I didn't. The advantage is that we would only have
one BufferData call per slice, rather than one per miplevel and slice.
However, a GenerateMipmaps microbenchmark indicates that either way is
basically just as fast. So I'm not sure it's worth bothering.
Improves performance in a GenerateMipmaps microbenchmark by nearly 5x.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Almost the exact same code appeared twice, and it needs to expand to
handle additional texture targets. Refactor it to tidy up the code and
avoid duplicating more work in the future.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
KHR_debug
Also update dispatch sanity removing ARB_debug_output checks and
removing KHR_debug placeholders as the checks have already been added
V2: Make sure we exit case statements with conditional breaks rather than
just dropping through.
Signed-off-by: Timothy Arceri <t_arceri@yahoo.com.au>
Reviewed-by: Brian Paul <brianp@vmware.com>
This fixes the a build breakage caused by
6974eb9076 on build configurations where
all the following are true:
1. radeonsi is not being built
2. r600g is being built
3. opencl is disabled
4. --enable-r600-llvm-compiler is not being used
5. libelf is not installed
v2:
- Add $(RADEON_CFLAGS) to libllvmradeon_la_CFLAGS
Tested-by: Brian Paul <brianp@vmware.com>
And move its definition into r600_pipe_common.h; This struct is a just
a container for shader code and has nothing to do with LLVM.
v2:
- Drop unrelated Makefile change
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
A user would have no idea what "_glthread_" is. This removes the
last remaining instance of the _glthread_ string in Mesa.
Reviewed-by: Chia-I Wu <olv@lunarg.com>
To check that the st_mesa_format_to_pipe_format() and
st_pipe_format_to_mesa_format() functions correctly convert
all corresponding Mesa/Gallium formats.
This found that MESA_FORMAT_YCBCR_REV was missing in
st_mesa_format_to_pipe_format(). Fixed that too.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
v2: rotate in gen_rect_verts instead
v3: clear rotate in vl_compositor_clear_layers,
update calc_drawn_area as well
Signed-off-by: Kusanagi Kouichi <slash@ac.auone-net.jp>
Signed-off-by: Christian König <christian.koenig@amd.com>
It's never used, and it's equivalent to ralloc_parent(ht) if you really
need it.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
To match PIPE_FORMAT_R8G8B8A8_SRGB.
v2: fix component name copy&paste bugs
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
We've had several problems now with FinishRenderTexture not getting called
enough, and we're ready to just give up on it ever doing what we need. In
particular, an upcoming Steam title had rendering bugs that could be fixed
by always_flush_cache=true.
Instead of hoping Mesa core can figure out when we need to flush our
caches, just track what BOs we've rendered to in a set, and when we render
from a BO in that set, emit a flush and clear the set.
There's some overhead to keeping this set, but most of that is just
hashing the pointer -- it turns out our set never even gets very large,
because cache flushes are so common (even on cairo-gl).
No statistically significant performance difference in cairo-gl (n=100),
despite spending ~.5% CPU in these set operations.
v1: (Original patch by Eric Anholt.)
v2: (Changes by Ken Graunke.)
- Rebase forward from May 7th 2013 -> March 4th 2014.
- Drop the FinishRenderTexture hook entirely; after rebasing the
patch, the hook was just an empty function.
- Move the brw_render_cache_set_clear() call from
intel_batchbuffer_emit_flush() to brw_emit_pipe_control_flush().
In theory, this could catch more cases where we've flushed.
- Consider stencil as a possible texturing source.
v3: (changes by anholt):
- Move set_clear() back to emit_mi_flush() -- it means we can drop
more forced flushes from the code. In the previous location, it
wouldn't have been called when we wanted pre-gen6.
- Move the set clear from batch init to reset -- it should be empty at
the start of every batch, since the kernel handled any inter-batch
flush for us.
v4: Drop the debug code in set.c that I accidentally committed.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Dylan Baker <baker.dylan.c@gmail.com> [v2]
With a non-debug build, gcc has two complaints:
1. 'found' var not used. Silence with '(void) found;'
2. 'id' not initialized. It's assigned by the UniformHash->get()
call, actually. But init it to zero to silence gcc.
Reviewed-by: Matt Turner <mattst88@gmail.com>
sizeof(scissor) returns the size of the full array rather than a single
element. Fix it to consider just the one element.
Fixes: 0705fa35 ("st/mesa: add support for GL_ARB_viewport_array (v0.2)")
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>
The texture formats of winsys fbo are always linear becase the st manager
(st/dri for example) could not know the colorspace used. But it does not mean
that we cannot make the fbo sRGB-capable. By
- setting rb->Visual.sRGBCapable to GL_TRUE when the pipe driver supports the
format in sRGB colorspace,
- giving rb an sRGB internal format, and
- updating code to check rb->Format instead of strb->texture->format,
we should be good.
Fixed bug 75226 for at least llvmpipe and ilo, with no piglit regression.
v2: do not set rb->Visual.sRGBCapable for GLES contexts to avoid surprises
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75226
Reviewed-by: Brian Paul <brianp@vmware.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
We need the header setup to not be predicated on which pixels are
undiscarded. I'm not sure originally if I had thought that the mask
disable implied predicate disable, or if I had just misread the mask
disable as predicate disable. Either way, I know I had spent more time
thinking about this in the gen8 generator than the gen7 generator.
Plus, it turns out that I had mis-implemented the "the GPU will use the
predicate unless this header is present" comment, by skipping setting up
the pixel mask when the header was present.
Fixes GPU hangs in piglit glsl-fs-discard-mrt, Trine, Trine 2 and
preusmably MLL.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75207
Tested-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
It was really only used in the radeon driver for a debug printf.
And evidently, libGL.so referenced it just to work around some sort
of linker issue.
This patch removes the two calls to the function and the function
itself.
Fixes undefined _glthread_GetID symbol in libGL reported by 'nm'.
Though, the missing symbol doesn't cause any issues on my system but
it does cause glxinfo to fail on one of our test systems.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Before, it was kind of ugly to set the multisample fields with
assignments after we called _mesa_init_teximage_fields().
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
If scissor optimization is used (to avoid bringing scissored portions of
the render target into GMEM and then back out to system memory) in
combination with hw binning pass, the result would be a scissor mismatch
between binning pass and rendering pass. This would cause rendering
bugs in some scenarios with (for example) gnome-shell.
I would have expected that simply using the correct screen-scissor
during the binning pass would be enough, but seems like there is
something else missing. So for now disable binning pass if scissor
optimization is used.
Most of the logic refers to the local variable 'mt' directly but
a few cases use 'intelObj->mt' instead. These are the same for
now but will be different once stencil miptree gets used.
v2 (Ian): fixed also indentation in surrounding lines
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
On earlier hardware, we had to implement math in the shader to translate
Y-tiled or untiled coordinates to W-tiled coordinates (which is what
BLORP does today in order to texture from stencil buffers).
On Broadwell, we can simply state that it's W-tiled in SURFACE_STATE,
and adjust the pitch. This is much easier.
In the surface state code, I chose to handle the "should we sample depth
or stencil?" question separately from the setup for sampling from
stencil. This should make it work with the BindRenderbufferTexImage
hook as well, and hopefully be reusable for GL_ARB_texture_stencil8
someday.
v2: Update docs/GL3.txt (caught by Matt).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
While the GL_ARB_stencil_texturing extension does not allow the creation
of stencil textures, it does allow shaders to sample stencil values
stored in packed depth/stencil textures.
Specifically, applications can call glTexParameter* with a pname of
GL_DEPTH_STENCIL_TEXTURE_MODE and value of either GL_DEPTH_COMPONENT or
GL_STENCIL_INDEX to select which component they wish to sample. The
default value is GL_DEPTH_COMPONENT (for traditional depth sampling).
Shaders should use an unsigned integer sampler (presumably usampler2D)
to access stencil data. Otherwise, results are undefined. Using shadow
samplers with GL_STENCIL_INDEX selected also is undefined behavior.
This patch creates a new gl_texture_object field, StencilSampling, to
indicate that stencil should be sampled rather than depth. (I chose to
use a boolean since I figured it would be more convenient for drivers.)
It also introduces the [Get]TexParameter code to get and set the value,
and of course the extension plumbing.
v2: Also consider textures incomplete when sampling stencil with
non-NEAREST min/mag filters (caught by Eric Anholt).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
The loader infrastructure for everything but DRI2 requires that udev be
present, so we can figure out an appropriate driver from the fd. We don't
have a portable solution yet, but presumably it will have similar lookup
based on the device node.
It will also be even more required for krh's udev-based hwdb support,
which lets us have a loader that actually loads DRI drivers not included
in the loader's source distribution.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75212
Reviewed-by: Matt Turner <mattst88@gmail.com>
Because in draw we always inject position at slot 0 whenever
fragment shader would take the maximum number of inputs (32) it
meant that we had PIPE_MAX_ATTRIBS + 1 slots to translate, which
meant that we were crashing with fragment shaders that took
the maximum number of attributes as inputs. The actual max number
of attributes we need to translate thus is PIPE_MAX_ATTRIBS + 1.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Matthew McClure <mcclurem@vmware.com>
draw_current_shader_* functions return a final output when considering
both the geometry shader and the vertex shader. But when code generating
vertex shader we can not be using output slots from the geometry shader
because, obviously, those can be completely different. This fixes a
number of very non-obvious crashes.
A side-effect of this bug was that sometimes the vertex shading code
could save some random outputs as position/clip when the geometry
shader was writing them and vertex shader had different outputs at
those slots (sometimes writing garbage and sometimes something correct).
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Matthew McClure <mcclurem@vmware.com>
From OpenGL 3.3 spec, page 141:
"Textures with a base internal format of DEPTH_COMPONENT or DEPTH_STENCIL
require either depth component data or depth/stencil component data.
Textures with other base internal formats require RGBA component data.
The error INVALID_OPERATION is generated if one of the base internal
format and format is DEPTH_COMPONENT or DEPTH_STENCIL, and the other
is neither of these values."
Fixes Khronos OpenGL CTS test failure: proxy_textures_invalid_size
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
From OpenGL 4.0 spec, page 398:
"The initial internal format of a texel array is RGBA
instead of 1. TEXTURE_COMPONENTS is deprecated; always
use TEXTURE_INTERNAL_FORMAT."
Fixes Khronos OpenGL CTS test failure: proxy_textures_invalid_size
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Starting with llvm-3.5svn r202574, LLVM expects C+11 mode.
commit f8bc17fadc8f170c1126328d203f0dab78960137
Author: Chandler Carruth <chandlerc@gmail.com>
Date: Sat Mar 1 06:31:00 2014 +0000
[C++11] Turn off compiler-based detection of R-value references, relying
on the fact that we now build in C++11 mode with modern compilers. This
should flush out any issues. If the build bots are happy with this, I'll
GC all the code for coping without R-value references.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202574 91177308-0d34-0410-b5e6-96231b3b80d8
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
`--enable-llvm-shared-libs` option was recently renamed as
`--with-llvm-shared-libs`, but several error messages still mention the
old option, causing confusing.
Trivial.
GetCurrentThread() returns a pseudo-handle (a constant which only makes
sense when used within the calling thread) and not a real handle.
DuplicateHandle() will return a real handle, but it will create a new
handle every time we call. Calling DuplicateHandle() here means we will
leak handles, which can cause serious problems.
In short, the Windows implementation of thrd_t needs a thorough make
over, and it won't be pretty. It looks like C11 committee
over-simplified things: it would be much better to have seperate objects
for threads and thread IDs like C++11 does.
For now, just comment out the thrd_current() implementation, so we get
build errors if anybody tries to use it.
Thanks to Brian Paul for spotting and diagnosing this problem.
Cc: "10.0" "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
u_thread_self() expects thrd_current() to return a unique numeric ID
for the current thread, but this is not feasible on Windows.
Cc: "10.0" "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
r600_translate_colorformat is rewritten to look like radeonsi.
r600_translate_colorswap is shared with radeonsi.
r600_colorformat_endian_swap is consolidated.
This adds some formats which were missing. Future "plain" formats will
automatically be supported.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
With commit 0432aa064b(configure: use shared-glapi when more than one
gl* API is used) we removed "disable shared-glapi when building without
dri" hunk.
In the good old days of classic mesa, dri and xlib-glx were mutually
exclusive thus the hunk made sense.
Currently enable-dri is used as a synonym for a range of things thus
it's more appropriate to handle xlib-glx explicitly.
Fixes a missing symbol '_glapi_Dispatch' in a xlib powered libGL,
build using the following
./autogen.sh --enable-xlib-glx --disable-dri --with-gallium-drivers=swrast
Cc: Brian Paul <brianp@vmware.com>
Reported-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The _glthread_LOCK/UNLOCK_MUTEX() macros are just wrappers around
the c11 mutex functions. Let's start getting rid of those wrappers.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Update the comments for the packed formats to accurately reflect the
layout of the bits in the pixel. For example, for the packed format
MESA_FORMAT_R8G8B8A8, R is in the least significant position while A
is in the most-significant position of the 32-bit word.
v2: also fix MESA_FORMAT_A1B5G5R5_UNORM, per Roland.
The spec incorrectly used void as return type, when it should have
been GLboolean. This has now been fixed. According to Nvidia, their
implementation always used GLboolean.
Reviewed-by: Christian König <christian.koenig@amd.com>
This is just a simple implementation that stores the extra values into the DRIimage
struct and just uses the fd importer. I haven't looked into what is required
to import YUV or deal with the extra parameters.
Signed-off-by: Dave Airlie <airlied@redhat.com>
i965 recently moved debug printfs to use stderr, including ones which
trigger on MESA_GLSL=dump. This resulted in scrambled output.
For drivers using ir_to_mesa, print_program was already using stderr,
yet all the code around it was using stdout.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
opt_algebraic was translating lrp(x, 0, a) into add(x, -mul(x, a)).
Unfortunately, this references "x" twice, which is invalid in the IR,
leading to assertion failures in the validator.
Normally, cloning IR solves this. However, "x" could actually be an
arbitrary expression tree, so copying it could result in huge piles
of wasted computation. This is why we avoid reusing subexpressions.
Instead, transform it into mul(x, add(1.0, -a)), which is equivalent
but doesn't need two references to "x".
Fixes a regression since d5fa8a9562, which isn't in any stable
branches. Fixes 18 shaders in shader-db (bastion and yofrankie).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The logic to count number of block outputs was out of sync with the
actual array construction. But to simplify / make things less fragile,
we can just allocate the arrays for worst case size.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
A value may be assigned on only one side of an if/else. In this case we
can simply substitute a mov.f32f32.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Add option to generate fragment shader to emulate two sided color.
Additional inputs are added to shader for BCOLOR's (on corresponding to
each COLOR input). CMP instructions are used to select whether to use
COLOR or BCOLOR.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
If vertex writes pointsize, there are a few extra bits we need to turn
on in the cmdstream here and there.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Now that we have the infrastructure for shader variants, add support to
generate an optimized shader for hw binning pass (with varyings/outputs
other than position/pointsize removed). This exposes the possibility
that the shader uses fewer constants than what is bound, so we have to
take care to not emit consts beyond what the shader uses, lest we
provoke the wrath of the HLSQ lockup!
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Fixes anything that tries to use gl_FrontFacing/gl_FragCoord. Also,
face support is needed to emulate two sided color.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
An unused input might not have a register assigned. We don't want bogus
regid to result in impossibly high max_reg..
Signed-off-by: Rob Clark <robclark@freedesktop.org>
BRW_MAX_TEX_UNIT is the static limit on the number of textures we
support per-stage, not in total.
Core's `Unit` array is sized by MAX_COMBINED_TEXTURE_IMAGE_UNITS, which
is significantly larger, and across the various shader stages, up to
ctx->Const.MaxCombinedTextureImageUnits elements of it may be actually
used.
Fixes invisible bad behavior in piglit's max-samplers test (although
this escalated to an assertion failure on HSW with texture_view, since
non-immutable textures only have _Format set by validation.)
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Cc: "9.2 10.0 10.1" <mesa-stable@lists.freedesktop.org>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Fixes glGetTexImage() when converting from MESA_FORMAT_Z32_FLOAT_S8X24_UINT
to GL_UNSIGNED_INT_24_8. Hit by the piglit
ext_packed_depth_stencil-getteximage test.
Cc: "10.0" "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Though it won't matter on Linux, use _mesa_align_free to release it.
Since i965 doesn't have sys_buffer, I overlooked this in the
GL_ARB_map_buffer_alignment work a few months ago. Fixes i915 (and
presumably i830) regressions in ARB_map_buffer_range tests and the
failure in arb_map_buffer_alignment-sanity_test.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74960
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
There's no reason to have more vertex texture units than fragment
texture units on this hardware. Since increasing the default maximum
number of texture units from 16 to 32, this has triggered some segfault
in i915 driver. There's probably some array or bitfield that isn't
properly sized now. This really papers over the bug, but I don't think
I'll lose any sleep over that.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74071
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
v2: vec4_visitor::pack_uniform_registers(): Use correct comparison in the
assert, this->uniforms is already adjusted. Compare the actual value used to
index uniform_size and uniform_vector_size instead.
Signed-off-by: Petri Latvala <petri.latvala@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
v2: Don't add function parameters, pass the required size in
prog_data->nr_params.
v3:
- Use the name uniform_array_size instead of uniform_param_count.
- Round up when dividing param_count by 4.
- Use MAX2() instead of taking the maximum by hand.
- Don't crash if prog_data passed to vec4_visitor constructor is NULL
v4: Rebase for current master
v5 (idr): Trivial whitespace change.
Signed-off-by: Petri Latvala <petri.latvala@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71254
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
GLX can be either dri or xlib based, while enable_dri is
used in a variety of contexts.
With enable_dri_glx the context is clearly visible.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
All hardware drivers including the virtual vmwgfx require
the drm pipe-loader in order to be properly loaded by xa,
gbm and opencl.
Note this does _not_ add support for the above three it only
allows the pipe driver to be loaded by the library.
Eg. GBM will now properly open the pipe-i915 driver, should
one be working on the such hardware.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75453
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Building to provide accelration using swrast does not make
sense.
Note: update your build script to explicitly mention svga
in the gallium drivers list, if you are building the vmwgfx
xa library.
v2: Update error message to provide more clarify, add an example.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Recent patch converted our logic to use test -n and test -z.
An emptry string variable (empty_str="") return true for both
thus making the check unreliable.
Fix this by correctly setting the variable when applicable.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The issue is caused by a thinko that an empty string will be
considered of zero length by 'test'. This is not the case,
thus we were building the 'core' of megadrivers even when no
classic drivers were built.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
glGetTexImage(GL_DEPTH_STENCIL, GL_UNSIGNED_INT_24_8) was just
using memcpy() instead of _mesa_unpack_uint_24_8_depth_stencil_row()
to convert texels from the hardware format to the GL format.
Fixes issue reported by David Meng at Intel. The new piglit
ext_packed_depth_stencil-getteximage test checks for this bug.
Also, add some format/type assertions. We don't yet handle the
GL_FLOAT_32_UNSIGNED_INT_24_8_REV type. That should be fixed in
a follow-on patch.
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: "10.0" "10.1" <mesa-stable@lists.freedesktop.org>
API is always API_OPENGL_COMPAT (since commit 4e4a537ad5,
"meta: Push into desktop GL mode when doing meta operations."),
so most of these checks do nothing.
We could instead check save->API to only bother setting/restoring
relevant GL state, but I'm not sure saving a few _mesa_set_enable
calls is worth the complexity. My understanding is the point of
the ctx->API guards was to avoid raising GL errors.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
In _mesa_meta_begin(), we switch to API_OPENGL_COMPAT, then munge a lot
of state (including some that doesn't exist in the actual API - like
PolygonStipple in API_OPENGL_CORE).
It seems reasonable that in _mesa_meta_end(), we should restore it,
then switch back to the original API. This at least makes it symmetric.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Some formats can't be handled - in particular cannot handle ints/uints formats,
which lack the pack_rgba_float/unpack_rgba_float functions. Instead of trying
to call these (and crash) return an error (I'm not sure yet if we should try
to translate such formats too here might not make much sense).
v2: suggested by Jose, use separate checks for pack/unpack of rgba_8unorm and
rgba_float functions (right now if one exists the other should as well).
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
There are currently only two VUE map layouts: one for Gen4-5, and one
for everything else. We keep having to add new "case N+1" labels for
every new hardware generation, and so far it's always been the same.
This patch makes it so we only have to do work in the case where
something actually changes.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
According to the BSpec's 3D workarounds page, this is unnecessary on
shipping Haswell hardware, and was never necessary on Broadwell. It
unfortunately doesn't say anything about Baytrail.
The workaround database confirms those results for Ivybridge, Haswell,
and Broadwell. Baytrail is less clear - one page says it's necessary,
while the other says it isn't. For now, be conservative and leave it
enabled.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
This makes it easy to compare output between different cards, especially
for ones that you don't have (and/or not in the current machine).
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
This should pave the way to being able to use the compiler without a
context. Also leads to cleaner code.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
By adding "#define gvec4 %svec4" to the top of our fragment shader, we
can write generic code without needing to specialize it to vec4, ivec4,
or uvec4 via asprintf.
This also makes the INT and UNSIGNED_INT merge function code identical,
so I combined those two cases.
It's not a big savings, but a little bit tidier.
v2: Rebase on Vinson's MSVC build fixes.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This fixes fbo-clear-formats GL_ARB_depth_texture on Ironlake, which
regressed since commit f128bcc7c2
("i965: Drop mt->levels[].width/height.") intel_miptree_copy_slice was
calling minify(.., 7) on a 2x2 texture with mt->first_level == 7.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75292
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Tt's kind of a trap---calling do_common_optimization() after
lower_instructions() may cause opt_algebraic() to reintroduce
ir_triop_lrp expressions that were lowered, effectively defeating the
point. Because of this, nobody uses it.
v2: Delete more code (caught by Ian Romanick).
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Acked-by: Eric Anholt <eric@anholt.net>
When the vec4 backend encountered an ir_triop_lrp, it always emitted an
actual LRP instruction, which only exists on Gen6+. Gen4-5 used
lower_instructions() to decompose ir_triop_lrp at the IR level.
Since commit 8d37e9915a ("glsl: Optimize open-coded lrp into lrp."),
we've had an bug where lower_instructions translates ir_triop_lrp into
arithmetic, but opt_algebraic reassembles it back into a lrp.
To avoid this ordering concern, just handle ir_triop_lrp in the backend.
The FS backend already does this, so we may as well do likewise.
v2: Add a comment reminding us that we could emit better assembly if we
implemented the infrastructure necessary to support using MAC.
(Assembly code provided by Eric Anholt).
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75253
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Acked-by: Eric Anholt <eric@anholt.net>
Similar to u_blitter, u_upload_mgr is now a client of the pipe context. Its
creation needs to be delayed until the context has been (almost) initialized.
The sort priorites for GLX_SAMPLES and GLX_SAMPLE_BUFFERS are
not defined in GL_ARB_multisample, but they are defined in
the GLX 1.4 specification.
Cc: "9.2 10.0 10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The default values for GLX_DRAWABLE_TYPE and GLX_RENDER_TYPE are
GLX_WINDOW_BIT and GLX_RGBA_BIT respectively, as specified in
the GLX 1.4 specification.
This fixes the glx-choosefbconfig-defaults piglit test.
Cc: "9.2 10.0 10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This variable is no longer needed after the cleanup to the
code prior to the first arrays of array series
Signed-off-by: Timothy Arceri <t_arceri@yahoo.com.au>
Reviewed-by: Matt Turner <mattst88@gmail.com>
On my gentoo system, llvm libs are in /usr/lib64/llvm, and llvm-config
--ldflags does not provide the rpath (it does, of course, provide a -L).
This adds the llvm dir to the rpath. It should be harmless if the path
is a system path, and should make things work when it's not.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
This will be used for changing texture properties without modifying
pipe_resource like r600g, but not in this series. For now, this change
allows consolidation of pipe_surface functions.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
db_z_info was unused. This just renames the variable to match the register
name.
Now, db_depth_info is unused on Evergreen.
Both variables will be needed on SI though.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
OpenGL allows a buffer to be mapped only once, but we also map buffers
internally, e.g. in the software primitive restart fallback, for PBOs,
vbo_get_minmax_index, etc. This has always been a problem, but it will
be a bigger problem with persistent buffer mappings, which will prevent
all Mesa functions from mapping buffers for internal purposes.
This adds a driver interface to core Mesa which supports multiple buffer
mappings and allows 2 mappings: one for the GL user and one for Mesa.
Note that Gallium supports an unlimited number of buffer and texture
mappings, so it's not really an issue for Gallium.
v2: fix unmapping in xm_dd.c, remove the GL errors there
v3: fix the intel driver (by Fredrik)
Reviewed-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Fredrik Höglund <fredrik@kde.org>
v2: dropped the error that DYNAMIC_STORAGE is required for MAP_WRITE_BIT,
the error is removed in the latest revision of GL 4.4
This adds support for GL_ARB_texture_gather, and one step of
support for GL_ARB_gpu_shader5.
This adds support for passing the TG4 instruction, along
with non-constant texture offsets, and tracking them for the
optimisation passes.
This doesn't support native textureGatherOffsets hw, to do that
you'd need to add a CAP and if set disable the lowering pass,
and bump the MAX offsets to 4, then do the i0,j0 sampling using
those.
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds support to gallium for a TG4 instruction,
and two CAPs. The first CAP is required for GL_ARB_texture_gather.
The second CAP is required to expose GL_ARB_gpu_shader5.
However so far we haven't found any hardware that natively
exposes the textureGatherOffsets feature from GL, so just
lower it for now. If hardware appears for this we can add
another CAP to allow TG4 to take 4 offsets.
v2: add component selection src and a cap to say
hw can do it. (st can use to help control
GL_ARB_gpu_shader5/GLSL 4.00). Add docs.
v3: rename to SM5, add docs.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This lowering pass will be useful for gallium drivers as well, in order to support
the GL TG4 oddity that is textureGatherOffsets.
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The offsets will be stored in the handles parameter. This makes
it possible to use sub-buffers.
v2:
- Style fixes
- Add support for constant sub-buffers
- Store handles in device byte order
v3:
- Use endian helpers
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Current automake build does not try to resolve undefined
symbols thus we could end up with a broken library.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
With the introduction of the pipe_loader_sw_probe_dri helper we
require the sw/dri winsys during linking stage despite it being
unused by any of the targets. This will cause a minor increase
in the resulting library which will be cleaned up via linker
options with upcoming patches.
v2: Link with libswdri.la only when available.
Reported-and-tested-by: Tom Stellard <thomas.stellard@amd.com> (v1)
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
While looking at bug 75356, I've noticed that the presence of
x11 egl platform pulls in sw/xlib as "needed" but fails to
report so at the end of configure.
Tested-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The above function implies using the the xlib winsys, which
has additional library dependencies that should not be forced.
Make the software xlib pipe loader optional thus avoid all
the dependency hell. A user that wishes to use the particular
pipe-loader would need to set the following within configure.ac.
enable_gallium_xlib_loader=yes
v2:
- Wrap sw/xlib/xlib_sw_winsys.h to handle compilation on systems
lacking X11 headers. Spotted by Christian Prochaska.
Tested-by: Tom Stellard <thomas.stellard@amd.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75356
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The blitter is completely ignorant of MSAA buffer layouts, so any
attempt to use BLT paths with MSAA buffers is likely to break
spectacularly.
In most cases, BLORP handles MSAA blits, so we never hit this bug.
Until recently, it also wasn't worth fixing, since Meta couldn't handle
MSAA either, so there was nothing to fall back to. But now there is.
+143 piglit tests on Broadwell (which doesn't have BLORP support).
Surprisingly, three also start failing. Since non-IMS MSAA buffers
store samples in successive array slices, using the blitter ought to
access sample 0 and ignore the rest, which is apparently good enough for
a few not-very-picky Piglit tests. Presumably the meta replacement code
is still broken.
No Piglit changes on Ivybridge.
v2: Move the early return to the top of the function (suggested by
Paul).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Using generic shaders caused a measurable fps drop, which was isolated to
use of full precision (vs half precision) output. This is an attempt to
regain that lost performance by using half precision solid/blit shaders
(when the output format is not float32).
Note: for the built-in shaders, I would not expect them to be register
starved. And in fact it is the solid frag shader that seems to have the
biggest impact. So I suspect you get double the pixel pipe units (or
half the cycles) when the output is half precision. So there may be
some gain to using half precision output for application shaders as
well, even though the rest of register usage is still full precision.
But for half precision to work for more complex shaders, we need to deal
with some constraints, like cat2 needing same precision for it's two src
registers. So for now it is not enabled by default except for the
built-in shaders.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Start putting in place infrastructure to deal with multiple shader
variants. Initially we'll use this for two sided color (frag) and
binning pass (vert) shaders. Possibly need for others later (such
as YUV vs RGB eglImage?).
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Easier than making more extensive use of rpt, and the more compact
shaders seem to bring some bit of performance boost. (Perhaps repeat
flag benefits are more than just instruction cache, possibly it saves
on instruction decode as well?)
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Instead in the common code, construct these shaders from TGSI. For now
we let a2xx keep it's hand coded shaders, as it's compiler isn't quite
up to the job yet. All the same it is a net drop in code size and gets
rid of special cases.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Make things configurable, and tweak the API a bit to avoid an extra
tgsi_shader_scan(). Getting closer to something generic which can be
moved out of freedreno and shaderd by other drivers.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
... over the one provided by the headers.
Explicitly set extension members to improve clarity.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
... over the one provided by the headers.
Explicitly set extension members to improve clarity.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
... over the one provided by the headers.
Explicitly set extension members to improve clarity.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
... over the one provided by the headers.
Currently both versions are identical, but that is not
guaranteed to be the case in the future.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
... over the one provided by the spec.
Currently both versions are identical, but that is not
guaranteed to be the case in the future.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
... over the version number provided by the headers.
Explicitly set extension members to improve clarity.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Note the member function releaseTexBuffer was added without
bumping spec version, and currently no drivers implement it.
v2: releaseTexBuffer was introduced by version 3
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
While we want to be able to print to stdout for glsl_compiler, for
debugging drivers we want to be able to dump to stderr because that's
where other driver debug (like LIBGL_DEBUG) tends to go, and because some
apps actually close stdout to shut up their own messages (such as the X
Server, or NWN).
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This was only going to get worse when tesselation shows up, and was
causing too much extra duplication in my stderr changes coming up.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Unfortunately there's only one RT_ARRAY_MODE setting for all
attachments, so clears were previously truncated to the minimum number
of layers any attachment had. Instead set the RT_ARRAY_MODE to 512 (the
max number of layers) before doing the clear. This fixes
gl-3.2-layered-rendering-clear-color-mismatched-layer-count.
Also fix clears of individual layered rt/zeta, in case it ever happens.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christoph Bumiller <e0425955@student.tuwien.ac.at>
Cc: 10.1 <mesa-stable@lists.freedesktop.org>
Use tex->bo_format instead of zs->format in ilo_blitter_rectlist_clear_zs()
because the latter may be combined depth/stencil format. hiz_can_clear_zs()
is no-op for GEN7+, but move the GEN check so that the assertions are tested.
Finally, call the fast depth clear function from ilo_clear().
Using this emit function implicitly creates three copies, which
is pointlessly inefficient.
1. Code creates the original instruction.
2. Calling emit(fs_inst) copies it into the function.
3. It then allocates a new fs_inst and copies it into that.
The second could be eliminated by changing the signature to
fs_inst(const fs_inst &)
but that wouldn't eliminate the third. Making callers heap allocate the
instruction and call emit(fs_inst *) allows us to just use the original
one, with no extra copies, and isn't much more of a burden.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
These functions (modulo emit_lrp, necessitating the small fix-up) pass
these arguments by value unmodified to other functions. No point in
making an additional copy.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The C99 spec says the type of an enum is implementation defined (but can
be char, signed int, or unsigned int). gcc appears to always give enums
four bytes, even when they can fit in less. It does so because this is
what other compilers seem to do [0] and therefore to maintain ABI
compatibility with them.
gcc has an -fshort-enum flag that tells the compiler to use only as much
space as needed for an enum. Adding __attribute__((__packed__)) to an
enum definition has the same behavior, but on a per-enum basis.
brw_reg_type and register_file are not part of the ABI, so we can safely
mark them as PACKED so that they'll take only a byte, rather than four.
[0] http://gcc.gnu.org/onlinedocs/gcc/Non-bugs.html#index-fshort-enums-3868
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
This patch fixes this SCons build error introduced with commit
4f37e52f37.
Compiling src/gallium/targets/libgl-xlib/xlib.c ...
src/gallium/targets/libgl-xlib/xlib.c:35:42: fatal error: state_tracker/xlib_sw_winsys.h: No such file or directory
#include "state_tracker/xlib_sw_winsys.h"
^
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75347
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
v2: Handle null_sw_create failure, add missing function return type
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> (v1)
Will be used in the following commits.
v2: Link gallium tests against the library.
v3: Handle dri_create_sw_winsys failure
v4: Rebase on top of the targets/xa changes
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> (v2)
Will be used in the upcoming patches.
v2: handle xlib_create_sw_winsys failure, drop unneeded header
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> (v1)
The sw pipe-loader implicitly handles winsys_create, thus we
it would make sense to implicitly destroy it upon releasing
the loader.
Currently we leak the sw_winsys when releasing the pipe-loader.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
We don't need an array mapping the shader index to "sampler2DMS",
"isampler2DMS", and so on. We can simply do "%ssampler2DMS" and pass in
vec4_prefix, which is "", "i", or "u".
This eliminates the use of C99 array initializers and should fix the
MSVC build.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75344
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
gl_texture_object's Target field is never a cube face enumeration, so
target_to_target is just the identity function. Aptly named, at least.
I verified this by putting an assert(!"ZOMG, CUBES!") in the cube face
case, and running Piglit. Nothing ever hit it. Beyond that, I
inspected the code in mesa/main.
This could probably also be deleted from i915, but I haven't tested
there.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This patch fixes this SCons build error.
build/linux-x86_64-debug/mesa/libmesa.a(context.os): In function `init_attrib_groups':
src/mesa/main/context.c:815: undefined reference to `_mesa_init_pipeline'
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Fix build error introduced with commit f4c13a890f.
CC pixeltransfer.lo
main/pipelineobj.c: In function '_mesa_delete_pipeline_object':
main/pipelineobj.c:59:4: error: unknown type name 'unsinged'
unsinged i;
^
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
This was originally included in another patch, but it was split out by
Ian Romanick.
v2 (idr):
* Trivial reformatting.
* Remove GL_COMPUTE_SHADER. Compute shaders don't participate in pipeline
objects anyway. Suggested by Matt Turner.
v3 (idr):
* Use _mesa_has_geometry_shaders.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This was originally included in another patch, but it was split out by
Ian Romanick.
v2 (idr): Return early from _mesa_ActiveShaderProgram if
_mesa_lookup_shader_program_err returns an error. Suggested by Jordan.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> [v2]
This will allow the guts of the implementation to be shared with
_mesa_CreateShaderProgramv.
This was originally included in another patch, but it was split out by
Ian Romanick.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Implement IsProgramPipeline based on the VAO code.
This was originally included in another patch, but it was split out by
Ian Romanick.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Implement GenProgramPipelines based on the VAO code.
This was originally included in another patch, but it was split out by
Ian Romanick.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Implement DeleteProgramPipelines based on the VAO code.
This was originally included in another patch, but it was split out by
Ian Romanick.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
V1:
* Extend gl_shader_state as pipeline object state
* Add a new container gl_pipeline_shader_state that contains
binding point of the previous object
* Update mesa init/free shader state due to the extension of
the attibute
* Add an init/free pipeline function for the context
V2:
* Rename gl_shader_state to gl_pipeline_object
* Rename Pipeline.PipelineObj to Pipeline.Current
* Formatting improvement
V3 (idr):
* Split out from previous uber patch.
* Remove '#if 0' debug printfs.
V4 (idr):
* Fix some errors in comments. Suggested by Jordan.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Future patches will use this function outside shaderapi.c.
This was originally included in another patch, but it was split out by
Ian Romanick.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Nothings implemented yet but glProgramUniform* which are mostly a
copy/paste of the older function glUniform*
I create dedicated pipelineobj.[ch] file that will contains function
related to the "new" pipeline container object.
V2: formatting improvement
V3:
* indentation fix
* Update copyright
* Add a comment on ProgramParameteri already present in another extension
* Remove TODO, will be readded on correct patch
V4 (idr):
* Fix dispatch_sanity unit test
* Make extension string available in core profiles (instead of just
compatibility).
* Trivial reformating
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
GL_ARB_separate_shader_objects adds the ability to specify location
layouts for interstage inputs and outputs.
In addition, this extension makes 'in' and 'out' generally available for
shader inputs and outputs. This mimics the behavior of
GL_ARB_explicit_attrib_location.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Current behaviour states that shared-glapi is usefull when building
with dri, which is not the case. Shared-glapi is used to dispatch
the gl* functions across the one or more gl api's which can be dri
based but do not need to be.
Fixed the following build
./configure --enable-gles2 --disable-dri --enable-gallium-egl \
--with-egl-platforms=fbdev --with-gallium-drivers=swrast
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75098
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Commit ee55500c22a(configure: cleanup classic dri drivers handling)
cleaned up the logic handling autodetection of dri drivers, but missed
the case when one can explicitly disable dri, and still request opengl.
Fixes build issues for the following
./autogen.sh --disable-dri --with-gallium-drivers=swrast
While we're here, explicitly clear with_dri_drivers whenever building
without such drivers to prevent choking later on.
v2: Simplify with_dri_drivers handling.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75126
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Compared to i965, the code generated doesn't use the AVG instruction. But
I'm not sure that multisampled integer resolves are really that important
to worry about.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
These are non-stretched, non-resolving blits, so it's just a matter of
sampling once from our gl_SampleID and storing that to our color/depth.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We're disabling GL_MULTISAMPLE, so we didn't need to worry about a lot of
that state. But to do MSAA to MSAA blits, we need to start handling more
state.
v2: Fix pasteo caught by Kenneth.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Blending of values would occur when doing GL_LINEAR filtering with
scaling, and in an upcoming commit when doing MSAA resolves.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Note that this doesn't handle GL_EXT_multisample_scaled_blit yet. The
i965 code for that extension bakes in knowledge of the sample positions
(well, knowledge of the sample positions aligned to a lower-resolution
grid), which we would have to do at runtime somehow for meta.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We haven't been executing this code before the meta-blit case, because
we've been flagging the miptree as validated at texstorage time, and never
having to revalidate.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Identified by Valgrind memory check. Initialized block-opaque in a
different patch. This test seems unnecessary. If opaque must be true,
just set to true.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Courtney Goeltzenleuchter <courtney@LunarG.com>
Define some additional convenience operators, clean up the
implementation slightly, and rename it to 'intrusive_ptr' for reasons
that will be obvious in the next commit.
Tested-by: Tom Stellard <thomas.stellard@amd.com>
I'd neglected to port these to Broadwell. Most of this code is copy
and pasted from Gen7, but instead of using F32TO16/F16TO32, we just
use MOV with HF register types.
Fixes fs-packHalf2x16 and fs-unpackHalf2x16 tests (both the ARB
extension and ES 3.0 variants).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Broadwell removed the F32TO16 and F16TO32 instructions. However, it has
actual support for HF values, so they're actually just MOV.
Fixes vs-packHalf2x16 and vs-unpackHalf2x16 tests (both the ARB
extension and ES 3.0 variants).
v2: Emulate F32TO16's align16 zeroing bug, since Chad's front end code
relies on it happening. We can probably refactor this code to be
better later.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
brw_init_state() calls brw_upload_initial_gpu_state(). If hardware
contexts are enabled (brw->hw_ctx != NULL), this will upload some
initial invariant state for the GPU. Without hardware contexts, we
rely on this state being uploaded via atoms that subscribe to the
BRW_NEW_CONTEXT bit.
Commit 46d3c2bf4d accidentally moved
the call to brw_init_state() before creating a hardware context.
This meant brw_upload_initial_gpu_state would always early return.
Except on Gen6+, we stopped uploading the initial GPU state via
state atoms, so it never happened.
Fixes a regression since 46d3c2bf4d.
Cc: "10.0 10.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
To make sure that both the Gen4 and Gen7 style messages work, I
initially disabled the SHADER_OPCODE_GEN7_SCRATCH_READ optimization,
ran Piglit, re-enabled it, and ran Piglit again. Both worked fine.
Fixes 40 Piglit tests (most of the varying-packing category).
v2: Move num_regs assertion from gen8_fs_generator to
gen8_set_dp_scratch_message() (suggested by Eric).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
The new accessors will make it easy to do Gen7-style scratch messages.
v2: Move num_regs assertion from gen8_fs_generator into
gen8_set_dp_scratch_message() (suggested by Eric).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
In the past, 3DSTATE_PS took an absolute number of threads. Conversely,
on Broadwell you always program 64, and it implicitly scales based on
the GT-level with no special programming. So, I stored 64 in
brw_device_info::max_wm_threads.
However, I didn't realize that we also use max_wm_threads to compute the
size of the scratch space buffer. In that case, we really need the
absolute number of threads.
This patch hardcodes 3DSTATE_PS to use the value it expects, and changes
max_wm_threads back to a (completely fake) absolute thread count (once
again copied from Haswell).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
On Broadwell, g0.5 contains the "Scratch Space Pointer"; using OR
puts some bits of that into "ignored" sections of our message header.
While this doesn't hurt, it's also not terribly /useful/. Using MOV
is sufficient to set the only interesting bits in this part of the
message header.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
According to the latest documentation, any PIPE_CONTROL with the
"Command Streamer Stall" bit set must also have another bit set,
with five different options:
- Render Target Cache Flush
- Depth Cache Flush
- Stall at Pixel Scoreboard
- Post-Sync Operation
- Depth Stall
I chose "Stall at Pixel Scoreboard" since we've used it effectively
in the past, but the choice is fairly arbitrary.
Implementing this in the PIPE_CONTROL emit helpers ensures that the
workaround will always take effect when it ought to.
Apparently, this workaround may be necessary on older hardware as well;
for now I've only added it to Broadwell as it's absolutely necessary
there. Subsequent patches could add it to older platforms, provided
someone tests it there.
v2: Only flag "Stall at Pixel Scoreboard" when none of the other bits
are set (suggested by Ian Romanick).
v3: Prefix the function with "gen8" (requested by Eric).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> (v2)
Reviewed-by: Eric Anholt <eric@anholt.net>
Grab the parsed invocation count, check for consistency
during linking, and finally save the result in
gl_shader_program Geom.Invocations.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
_mesa_glsl_parse_state in_qualifier->invocations will store the
invocations count.
v3:
* Use in_qualifier to allow the primitive to be specied
separately from the invocations count (merge_qualifiers)
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
We introduce a new merge_in_qualifier ast_type_qualifier
which allows specialized handling of merging input layout
qualifiers.
By merging layout qualifiers into state->in_qualifier, we
allow multiple input qualifiers. For example, the primitive
type can be specified specified separately from the
invocations count (ARB_gpu_shader5).
state->gs_input_prim_type is moved into state->in_qualifier->prim_type
state->gs_input_prim_type_specified is still processed separately
so we can determine when the input primitive is specified. This
is important since certain scenerios are not supported until after
the primitive type has been specified in the shader code.
v4:
* Merge with compute shader input layout qualifiers
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Improves performance of a dolphin emulator trace I had laying around by
3.60131% +/- 0.995887% (n=128).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We generate steaming piles of these for the centroid workaround, and this
quickly cleans them up.
total instructions in shared programs: 1591228 -> 1590047 (-0.07%)
instructions in affected programs: 26111 -> 24930 (-4.52%)
GAINED: 0
LOST: 0
(Improved apps are l4d2, csgo, and dolphin)
Reviewed-by: Matt Turner <mattst88@gmail.com>
The previous code relied on cpu denorm support for converting small float
formats (such r11g11b10_float and r16_float) to floats, otherwise denorms
are flushed to zero. We worked around that in llvmpipe blend code by
reenabling denorms, but this did nothing for texture sampling. Now it would
be possible to reenable it there too but I'm not really a fan of messing
with fpu flags (and it seems we can't actually do it reliably with llvm in
any case looking at some bug reports). (Not to mention if you actually have
a lot of denorms in there, you can expect some order-of-magnitude slowdown
with x86 cpus.)
So instead use code which adjusts exponents etc. directly hence not relying
on cpu denorm support for the rescaling mul.
(We still need the fpu flag handling as we can't do float-to-smallfloat
without using cpu denorms at least for now - I actually wanted to keep
both the old and new code and using one or the other depending on from where
it's called but that didn't work out as the parameter would have to be passed
through too many layers than I'd like.)
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Si Chen <sichen@vmware.com>
We need to advertise 8x, 4x, and 2x multisamples. Previously, we only
claimed to support 0/1 samples.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
I can't find any documentation to explain what ought to be done here, so
I simply guessed based on the pattern I observed in the 4x/8x cases.
It appears to work, but it could be totally wrong.
I was able to find the Sandybridge PRM quote from the comments in the
latest documentation: Shared Functions > 3D Sampler > Multisampled
Surface Behavior. However, it only mentions 4x MSAA - not even 8x.
After a substantial amount more digging, I was able to find a second
page (incorrectly tagged) which confirmed the formulas in our code for
8x MSAA. However, that page didn't mention 2x MSAA at all.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
According to the "Point Multisample Rasterization" of the OpenGL
specification (3.0 or later), smooth points are supposed to be enabled
implicitly when multisampling, regardless of the GL_POINT_SMOOTH flag.
However, if GL_POINT_SPRITE is enabled, you get square points no matter
what. Core contexts always enable point sprites, so this effectively
makes smooth points go away, even in the case of multisampling.
Fixes Piglit's EXT_framebuffer_multisample/point-smooth tests.
(Yes, that's right folks, we actually have Piglit tests for this.)
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
The meaning and effects of this bit are surprisingly complicated.
See Rasterization > Windower > Multisampling > Multisample ModesState.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
This restriction carries forward from earlier platforms. The code is
ported straight from gen7_wm_state.c.
v2: Actually do it right.
v3: Add missing _NEW_MULTISAMPLE bit (caught by Eric).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
v2: Also set the "oMask Present to Render Target" bit, which is required
for shaders that write oMask. Otherwise the hardware won't expect
the extra data.
v3: Add missing _NEW_MULTISAMPLE (caught by Eric).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
I made a few changes which I think simplify the code a bit compared to
the Gen7 implementation, but which are largely pointless.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
We already set the number of samples, but were missing the MSAA layout
mode. Reusing gen7_surface_msaa_bits makes it easy to set both.
This also lets us drop the Gen8 surface_num_multisamples function.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
The enumerations are just log2(num_samples) shifted by 3, which we can
easily compute via ffs().
This also makes it reusable for Broadwell, which has 2x MSAA.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
These enumerations are simply log2 of the number of multisamples shifted
by a bit, so we can calculate them using ffs() in a lot less code.
Suggested by Eric Anholt.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
The const in
const unsigned foo(void);
is meaningless. Removing it silences this warning:
src/glsl/ast_to_hir.cpp:1802:56: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
From page 14 (page 20 of the PDF) of the GLSL 1.10 spec:
"In addition, all identifiers containing two consecutive underscores
(__) are reserved as possible future keywords."
The intention is that names containing __ are reserved for internal use
by the implementation, and names prefixed with GL_ are reserved for use
by Khronos. Names simply containing __ are dangerous to use, but should
be allowed.
Per the Khronos bug mentioned below, a future version of the GLSL
specification will clarify this.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "9.2 10.0 10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Tested-by: Darius Spitznagel <d.spitznagel@goodbytez.de>
Cc: Tapani Pälli <lemody@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71870
Bugzilla: Khronos #11702
Section 3.3 (Preprocessor) of the GLSL 1.30 spec (and later) and the
GLSL ES spec (all versions) say:
"All macro names containing two consecutive underscores ( __ ) are
reserved for future use as predefined macro names. All macro names
prefixed with "GL_" ("GL" followed by a single underscore) are also
reserved."
The intention is that names containing __ are reserved for internal use
by the implementation, and names prefixed with GL_ are reserved for use
by Khronos. Since every extension adds a name prefixed with GL_ (i.e.,
the name of the extension), that should be an error. Names simply
containing __ are dangerous to use, but should be allowed. In similar
cases, the C++ preprocessor specification says, "no diagnostic is
required."
Per the Khronos bug mentioned below, a future version of the GLSL
specification will clarify this.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "9.2 10.0 10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Tested-by: Darius Spitznagel <d.spitznagel@goodbytez.de>
Cc: Tapani Pälli <lemody@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71870
Bugzilla: Khronos #11702
Linking with LLVM static libraries is easily broken by changes to
the llvm-config program or when LLVM adds, removes, or changes library
components. Keeping up with these changes requires a lot of maintanence
effort to keep the build working on the master and stable branches.
Also, because of issues in the past LLVM static libraries, the release
manager is currently configuring with --with-llvm-shared-libs when
checking the build before release. Enabling shared libraries by
default would allow the release manager to run ./configure with
no arguments, and be reasonably confident that the build would succeed.
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
Useful because the total number of uniform components might exceed
MAX_UNIFORMS * 4 in some cases because of the image metadata we'll be
passing as push constants.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Like the VEC4 back-end does. It will make dynamic allocation of the
param_size array easier in a future commit.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Since we are now consuming two ringbuffers at a time, we probably want a
pool larger than 4.. but we don't need each individual ringbuffer to be
so large, so offset the pool size increase by reducing rb size.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
It seems the write-after-read hazard that applies to texture fetch
instructions, also applies to sfu instructions.
Also, cat5/cat6 instructions do not have a (ss) bit, so in these
cases we need to insert a dummy nop instruction with (ss) bit set.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
There doesn't seem to be any reason for it to be a method, and it's
surprising that the expression 'reg.retype(t)' doesn't retype its
object but rather it creates a temporary with the new type. Use
'retype(reg, t)' instead.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Add assertion that the register is not in the HW_REG or IMM file,
calculate the conjunction of the old and new mask instead of replacing
the old [consistent with the behavior of brw_writemask(), causes no
functional changes right now], make it static inline to let the
compiler do a slightly better job at optimizing things, and shorten
its name.
v2: Assert that the new writemask is not zero to avoid undefined
hardware behaviour.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
And define non-mutating helper functions to retype fixed and normal
regs with a common interface. At some point we may want to get rid of
::fixed_hw_reg completely and have fixed regs use the normal register
data members (e.g. backend_reg::reg to select a fixed GRF number,
src_reg::swizzle to store the swizzle, etc.), I have the feeling that
this is not the last headache we're going to get because of the
multiple ways to represent the same thing and the different register
interface depending on the file a register is stored in...
Reviewed-by: Paul Berry <stereotype441@gmail.com>
There doesn't seem to be any reason for nr_params, nr_pull_params,
param, and pull_param to be duplicated in the stage-specific
subclasses of brw_stage_prog_data. Moving their definition to the
common base class will allow some code sharing in a future commit, the
removal of brw_vec4_prog_data_compare and brw_*_prog_data_free, and
the simplification of the stage-specific brw_*_prog_data_compare.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Broadwell's 3DSTATE_WM_HZ_OP packet makes this much easier.
Instead of programming the whole pipeline, we simply have to emit the
depth/stencil packets, a state override, and a pipe control. Then
arrange for the state to be put back. This is easily done from a single
function.
v2: Use minify(mt->logical_{width,height}0, level) in 3DSTATE_WM_HZ_OP
instead of intel_mipmap_level's width/height fields. Those were
based on the physical width/height, and thus wrong for MSAA buffers.
Eric also deleted those fields.
v3: Use 0xFFFF as the sample mask regardless of what the user set (as
this operation is unrelated); set the drawing rectangle to the
miplevel being operated on, rather than the whole surface; remove
unnecessary MAX2(..., 1) around mt->logical_depth0 (all suggested
by Eric Anholt).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
The existing code followed the vtable function signature, which is not a
great fit: many of the parameters are unused, and the function still
inspects global state, making it less reusable.
This patch refactors the depth buffer packet emission code into a new
function which takes exactly the parameters it needs, and which uses no
global state. It then makes the existing vtable function call the new
one.
Ideally, we would remove the vtable function, and clean up that
interface. But that can happen once HiZ is working.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Broadwell's "HiZ Resolve" operation still has the restriction that the
rectangle primitive must be 8x4 aligned. So I believe we still need
this.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
HiZ buffers still don't exist, but when they do, we'll set them up.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
brw_depthbuffer_format is not very reusable at the moment, since it
uses global state (ctx->DrawBuffer) to access a particular depth buffer.
For HiZ on Broadwell, I need a function which simply converts the
formats. However, at least one existing user of brw_depthbuffer_format
really wants the existing interface. So, I've created a new function.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
This reverts commit 1456ed85f0.
_eglInitResource can and is supposed to be called on subclass objects.
Acked-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
This reverts commit 498d10e230.
_eglInitResource can and is supposed to be called on subclass objects.
Acked-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Even with the other limits raised, TestProxyTexImage would still reject
textures > 1GB in size. This is an artificial limit; nothing prevents
us from having a larger texture. I stayed shy of 2GB to avoid the
larger-than-aperture situation.
For 3D textures, this raises the effective limit:
- RGBA8: 645 -> 738
- RGBA16: 512 -> 586
- RGBA32F: 406 -> 465
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74130
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Gen4+ supports 8192x8192 cube maps. Ivybridge and later can actually
support 16384, but that would place GL_MAX_CUBE_MAP_TEXTURE_SIZE above
GL_MAX_TEXTURE_SIZE, which seems like a bad idea.
(Unfortunately, we can't bump GL_MAX_TEXTURE_SIZE to 16384 without
causing regressions due to awful W-tiled stencil buffer interactions.)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74130
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
GL_ARB_ES2_compatibility doesn't say anything about shader linking
when one of the shaders (vertex or fragment shader) is absent. So,
the extension shouldn't change the behavior specified in GLSL
specification.
Tested the behavior on proprietary linux drivers of NVIDIA and AMD.
Both of them allow linking a version 100 shader program in OpenGL
context, when one of the shaders is absent.
Makes following Khronos CTS tests to pass:
successfulcompilevert_linkprogram.test
successfulcompilefrag_linkprogram.test
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This drops the MOVs for header setup, which are totally mis-scheduled.
total instructions in shared programs: 1590047 -> 1589331 (-0.05%)
instructions in affected programs: 43729 -> 43013 (-1.64%)
GAINED: 0
LOST: 0
glb27-trex:
x before
+ after
+-----------------------------------------------------------------------------+
| + x xx + + + |
| ++ + xxx ++x xx + ** *x+ + + + x * |
|+x xx x* x+++xx*x*xx+++*+*xx++** *x* x+***x*+xx+* + * + + *|
| |__|__________MA___A___________|___| |
+-----------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 49 62.33 65.41 63.49 63.53449 0.62757822
+ 50 62.28 65.4 63.7 63.6982 0.656564
No difference proven at 95.0% confidence
Reviewed-by: Matt Turner <mattst88@gmail.com>
It often confused people because it was unclear on whether it was the
physical or logical, and people needed the other one as well. We can
recompute it trivially using the minify() macro, clarifying which value is
being used and making getting the other value obvious.
v2: Fix a pasteo in intel_blit.c's dst flip.
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz> (v1)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Since only window system renderbuffers can have a singlesample_mt, this
lets us drop a bunch of sanity checking to make sure that we're just a
renderbuffer-like thing.
v2: Fix a badly-written comment (thanks Kenneth!), drop the now trivial
helper function for set_needs_downsample.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The only DRI2 vs DRI3 delta was just how to decide about frontbuffer-ness
for doing the upsample.
v2: Fix missing singlesample_mt->region->name update in the merged code,
which would have broken the DRI2 don't-recreate-the-miptree
optimization.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Pretty silly to pass in values dereferenced out of one of the arguments.
v2: Get the destination size from the dst, even though the callers are
always dealing with src size == dst size cases.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
So far it's happened to be that we're only ever calling
intel_miptree_blit() (up/downsampling) from the ReadBuffer, but I stumbled
over a null ReadBuffer case when debugging later parts of the series.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Mostly mt->target == 2D_MS just results in a few checks that we don't try
to allocate multiple LODs and don't try to do slice copies with them. But
with the introduction of binding renderbuffers to textures, we need more
consistency.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This lets us simplify our shaders, and rely on GLES-prohibited
functionality (like ARB_texture_multisample) when writing these
driver-internal functions.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Fixes:
xa_tracker.c: In function 'xa_tracker_create':
xa_tracker.c:147:5: error: implicit declaration of function 'pipe_loader_drm_probe_fd' [-Werror=implicit-function-declaration]
in some build configurations, as XA now implicitly depends on
gallium_drm_loader.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Fixes radeonsi emitting command streams to the kernel even when there
have been no draw calls before a flush, potentially powering up the GPU
needlessly.
Incidentally, this also cuts the runtime of piglit gpu.py in about half
on my Kaveri system, probably because an X11 client going away no longer
always results in a command stream being submitted to the kernel via
glamor.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=65761
Cc: "10.1" mesa-stable@lists.freedesktop.org
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Required for libdrm 2.4.37 and earlier. Both scons and automake
require version 2.4.38 now so that guard is not longer needed.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
xorg-server and libkms is no longer required since the removal
of the xorg state-tracker.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This is the first version that introduced DRM_CAP_PRIME, which is
implicitly required by egl/wayland.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
* Make sure that only drivers that are handled by configure.ac
are included in DRI_DIRS.
* Change with_dri_drivers default value to auto, and set enable
autodetection, when enable_opengl is on.
v2: Move "test" to the correct location.
v3: Squash DRI_DIRS handling before the switch statement.
Suggested by Ilia Mirkin
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Both x86_64|amd64 and *bsd, already set the full range of available
classic dri drivers. Drop the explicit assignment, and fall back to
the generic default.
Keep explicit list from plafroms/arches that do not handle the default
list.
Update help strings, to explicitly mention "classic" for applicable
DRI drivers.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Move all the cases within one switch statement and handle
i9{1,6}5 and r{adeon,200} independently.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
If built without llvm, the following error occurs with mplayer:
Failed to open VDPAU backend .../libvdpau_r600.so: undefined symbol: _ZTVN10__cxxabiv117__class_type_infoE
[vo/vdpau] Error when calling vdp_device_create_x11: 1
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kusanagi Kouichi <slash@ac.auone-net.jp>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
DRM_API_HANDLE_TYPE_SHARED is zero, so doesn't actually fix anything.
But we shouldn't rely on SHARED handle type being zero.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Build two versions of pipe-loader, with only the client version linking
in x11 client side dependencies. This will allow the XA state tracker
to use pipe-loader.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Seems texture sample instructions don't immediately consume there
src(s). In fact, some shaders from blob compiler seem to indiciate that
it does not even count the texture sample instructions when calculating
number of delay slots to fill for non-sample instructions. (Although so
far it seems inconclusive as to whether this is required.)
In particular, when a src register of a previous texture sample
instruction is clobbered, the (ss) bit is needed to synchronize with the
tex pipeline to ensure it has picked up the previous values before they
are overwritten.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Was supposed to be a '+', otherwise we end up with a negative offset and
choosing registers below the assigned range.
This seems to fix the scheduling mystery "solved" by adding in extra
delay slots.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Since 'kill' does not produce a result, the new compiler was happily
optimizing them out. We need to instead track 'kill's similar to
outputs. But since there is no non-predicated kill instruction,
(and for flattend if/else we do want them to be predicated), we need
to track the topmost branch condition on the stack and use that as src
arg to the kill. For a kill at the topmost level, we have to generate
an immediate 1.0 to feed into the cmps.f for setting the predicate
register.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Thanks to figuring out 32bit float render target, and adding regdump
test in fdre-a3xx, I can more easily play around with instructions to
figure out range of inputs/outputs/etc. And from this I can conclude
that cmps.f works more like expected and I can do something much more
simple in trans_cmp() (compared to before which was more closely
emulating the instruction sequence of the blob compiler).
And using sel.b32 (binary 0/1) often makes more sense than sel.f32
(+/- float) or sel.u32 (+/- uint) as it can use the output directly
from cmps.f without needing the 'add.s tmp0, tmp0, -1'.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
As documented, the _mesa_free_shader_program_data function:
"Frees all the data that hangs off a shader program object, but not
the object itself."
This means that this function may be called multiple times on the same object,
(and has been observed to). Meanwhile, the shProg->Label field was not being
set to NULL after its free(). This led to a second call to free() of the same
address on the second call to this function.
Fix this by setting this field to NULL after free(), (just as with all other
calls to free() in this function).
Reviewed-by: Brian Paul <brianp@vmware.com>
CC: mesa-stable@lists.freedesktop.org
The linux winsys needs to know whether a surface is shared.
For guest-backed surfaces we need this information to avoid allocating a
mob out of the mob cache for shared surfaces, but instead allocate a shared
mob, that is never put in the mob cache, from the kernel.
Also previously, all surfaces were given the "shareable" attribute when
allocated from the kernel. This is too permissive for client-local surfaces.
Now that we have the needed info, only set the "shareable" attribute if the
client indicates that it needs to share the surface.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
In some situations, it may be desirable to bypass the cache at buffer
creation but to insert the buffer in the cache at buffer destruction.
One such situation is where we already have a kernel representation of a
buffer that we want to use, but we also want to insert it in the cache when
it's freed up.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
In some situations it's important to restrict the sizes of buffers that the
cached buffer manager is allowed to return
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
This adds new interface functions for guest-backed surfaces and
adds a mobid parameter to the surface_relocation() function.
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
The old svga3d_reg.h file is split into separate header files and we
add new items for guest-backed surfaces.
Plus some minor code fixes because of renamed symbols.
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Commit f4ebcd133b ("dri/nouveau: NV17_3D class is not available for
NV1a chipset") fixed this partially by using the correct 3d class.
However there were a lot of checks left over comparing against the
chipset.
Reported-and-tested-by: John F. Godfrey <jfgodfrey@gmail.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: 9.2 10.0 10.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
v2 (chk): fix eos handling
v3 (leo): implement scaling configuration support
v4 (leo): fix bitrate bug
v5 (chk): add workaround for bug in Bellagio
v6 (chk): fix div by 0 if framerate isn't known,
user separate pipe object for scale and transfer,
always flush the transfer pipe before encoding
v7 (chk): make suggested changes, cleanup a bit more,
only advertise encoder on supported hardware
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
v2: add fw version query
v3: add README.VCE
v4: avoid error msg when kernel doesn't support it
Signed-off-by: Christian König <christian.koenig@amd.com>
Commit 246ca4b001 ("nv50: implement multiple viewports/scissors, enable
ARB_viewport_array") added dirty tracking to scissors/viewports. However
it neglected to mark them all as dirty on a context switch. This fixes
an apparent regression in webgl in chrome, but probably in any
application that switches contexts.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
The bound range is disconnected from the viewport dimensions. This is
the relevant bit from glViewportArray:
"""
The location of the viewport's bottom left corner, given by (x, y) is
clamped to be within the implementaiton-dependent viewport bounds range.
The viewport bounds range [min, max] can be determined by calling glGet
with argument GL_VIEWPORT_BOUNDS_RANGE. Viewport width and height are
silently clamped to a range that depends on the implementation. To query
this range, call glGet with argument GL_MAX_VIEWPORT_DIMS.
"""
Just set it to +/-16384, as that is the minimum required by
ARB_viewport_array and the value that all current drivers provide.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This avoids a CopyTexImage() on Intel i965 hardware without blorp.
v2: Move the !readAtt check up higher.
v3: Rebase on idr's changes, plus readAtt check is totally gone, and also
fix a typo in a comment.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v2)
This will let us use meta's acceleration from renderbuffers without having
to do a CopyTexImage first.
This is like what we do for TFP, but just taking an existing renderbuffer
and binding it to a texture with whatever its format was. The
implementation won't work for stencil renderbuffers, and it only does
non-texture renderbuffers (but then, if you're using a texture
renderbuffer, you can just pull the texture object/level/slice out of the
renderbuffer, anyway).
v2: Don't forget to propagate NumSamples to the teximage.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This function is only handling the color case. We can just unindent as
long as we're willing to do the check for the bit outside of the
function.
v2: Rebase on idr's changes, drop readAtt check that's always non-null
anyway (it's a pointer into to the statically-allocated attachments
array in the renderbuffer).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v1)
I want split some meta.c code off to a separate file, so these functions
can't be static any more.
v2: Rebase on idr's changes, also expose setup_blit_shader,
blit_shader_table_cleanup, setup_vertex_objects,
setup_ff_tnl_for_blit.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v1)
I'd like to split some of our code to separate files, since 4k lines and
growing is pretty unreasonable for all these separate operations.
v2: Rebase on idr's changes.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v1)
There was this funny argument passed to setup for "did alloc decide we
need to allocate new texture storage?", which goes away if we don't have
the caller do alloc as a separate step.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
From the GL_ARB_fbo spec:
If the source and destination buffers are identical, and the
source and destination rectangles overlap, the result of the blit
operation is undefined.
As far as I know, that's the only thing that would have been of concern
for this.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
I tripped over one of these when debugging meta, and it's a lot nicer to
just see the internalFormat being complained about.
v2: Drop a note in the other errors path that there is one early return.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
While these structs are generated per GLSL sampler type, they're structs
of data-about-shaders (notably, the ID of a shader program), not
data-about-samplers.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Everyone was just immediately calling it and doing nothing else with the
shader program id.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The only thing that wants to track the glsl_sampler structure is the
shader string generator.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Most of the VEC4 back-end agrees on src_reg::swizzle being one of the
BRW_SWIZZLE macros defined in brw_reg.h, except in two places where we
use Mesa's SWIZZLE macros. There is even a doxygen comment saying
that Mesa's macros are the right ones. They are incompatible swizzle
representations (3 bits vs. 2 bits per component), and the code using
Mesa's works by pure luck. Fix it.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
The same effect can be achieved using ::subreg_offset. Remove the
less flexible alternative and define a convenience function to keep
the fs_reg interface sane.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
The same effect can be achieved using a combination of ::stride and
::subreg_offset. Remove the less flexible ::smear to keep the data
members of fs_reg orthogonal.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
v2: Some improvements for copy propagation with non-contiguous
register strides and mismatching types.
v3: Add example of the situation that the copy propagation changes are
intended to avoid. Clarify that 'fs_reg::apply_stride()' is expected
to work with zero strides too.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
It would be nice if we could have a single 'reg_offset' field
expressed in bytes that would serve the purpose of both, but the
semantics of 'reg_offset' are quite complex currently (it's measured
in units of one, eight or sixteen dwords depending on the register
file and the dispatch width) and changing it to bytes would be a very
intrusive change at this stage. Add a separate 'subreg_offset' field
for now.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
To fix MSVC compile breakage. Evidently, _restrict is an MSVC keyword,
though the docs only mention __restrict (with two underscores).
Note: we may want to also rename _volatile to volatile_flag to be
consistent.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74900
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Fix formatting, add new comments, get rid of extraneous indentation.
Suggested by Ian in bug 74723.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
v2: Set driver-specified flag in NewDriverState when glUniform* is
used to bind an image unit.
v3: Abbreviate argument type check.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Because of the combinatorial explosion of different image built-ins
with different image dimensionalities and base data types, enumerating
all the 242 possibilities would be annoying and a waste of .text
space. Instead use a special path in the built-in builder that loops
over all the known image types.
v2: Generate built-ins on GLSL version 4.20 too. Rename
'_has_float_data_type' to '_supports_float_data_type'. Avoid
duplicating enumeration of image built-ins in create_intrinsics()
and create_builtins().
v3: Use a more orthodox approach for passing image built-in generator
parameters.
v4: Cosmetic changes.
Acked-by: Paul Berry <stereotype441@gmail.com>
No opaque types may be statically initialized in the shader, all
opaque variables must be declared uniform or be part of an "in"
function parameter declaration, no opaque types may be used as the
return type of a function.
v2: Add explicit check for opaque types in interface blocks. Check
for opaque types in ir_dereference::is_lvalue().
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Aggregating images inside uniform blocks is explicitly disallowed by
the standard, aggregating them inside structures is not (as of GL
4.4), but there is a similar problem as with atomic counters: image
uniform declarations require either a "writeonly" memory qualifier or
an explicit format qualifier, which are explicitly forbidden in
structure member declarations. In the resolution of Khronos bug
#10903 the same wording applied to atomic counters was decided to mean
that they're not allowed inside structures -- Rejecting image member
declarations within structures seems the most reasonable option for
now.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
v2: Add comment next to the read_only and write_only qualifier flags.
Change temporary copies of the type qualifier mask to use uint64_t
too.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Add predicates to query if a GLSL type is or contains an image.
Rename sampler_coordinate_components() to coordinate_components().
v2: Use assert instead of unreachable.
v3: No need to use a separate code-path for images in
coordinate_components() after merging image and sampler fields in
the glsl_type structure.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
v2: Reuse the glsl_sampler_dim enum for images. Reuse the
glsl_type::sampler_* fields instead of creating new ones specific
to image types. Reuse the same constructor as for samplers adding
a new 'base_type' argument.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
This fixes bug 73200 "vdpau-GL interop fails due to different screen
objects" in the same way radeon does.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Only export __driDriverExtensions by default, and radeon_drm_winsys_create on radeons.
Remove -Bsymbolic which should no longer be needed.
As a side effect, it ought to fix a manifestation of bug 73200 on radeon.
Signed-off-by: Maarten Lankhorst<maarten.lankhorst@canonical.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixed piglit test getteximage-targets S3TC CUBE_ARRAY on systems that
don't have libtxc_dxtn installed.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This will be necessary to support cubemap array textures because they
use all four components.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Rectangle textures were not necessary for mipmap generation (because
they cannot have mipmaps), but all of the future users of this common
code will need to support rectangle textures.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This is quite like code we want for blits. Pull it out so that it can
be shared by other paths.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This will allow the same table of shader-per-sampler-type to be used for
paths in meta other than just mipmap generation. This is also the
reason the declarations of the structures was moved towards the top of
the file.
v2: Code formatting change suggested by Brian.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Also... glOrtho(-1.0, 1.0, -1.0, 1.0, -1.0, 1.0) *is* the identity
matrix, so drop the unnecessary call to _mesa_Ortho.
v2: Rename setup_ff_TNL_for_blit() to setup_ff_tnl_for_blit(). Seems
silly to capitalize one out of two to three acronyms in the name
(change by anholt, acked by idr).
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com> (v1)
Reviewed-by: Eric Anholt <eric@anholt.net>
I set the "address modify enable" bit in the wrong DWord. The first
DWord is the high 16 bits of the address, while the second is the low
32-bits and enable bit.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
We never set it on previous generations, but I had to set it in
3DSTATE_PS for correct behavior. For symmetry, I set it in 3DSTATE_VS
as well, but there's no actual need to do so. Piglit works fine either
way. The documentation also remarks that there should never be a need
to program this.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
My earlier patch (i965: Reserve space for "Vertex Count" in GS outputs.)
incremented Global Offset for most URB writes to make room for the new
"Vertex Count" field, but failed to shift the URB writes used for
writing control bits.
Confusingly, Global Offset must be incremented by 2 here, rather than 1.
The URB writes we use for actual data are HWord writes, which treat
Global Offset as a 256-bit offset. These are OWord writes, so it's
treated as a 128-bit offset instead.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
I added support for these on Haswell, but forgot to update the Broadwell
code before landing it. Fixes Piglit's max-samplers test.
v2: Use get_element_ud() for the destination as well as the source.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
I added support for these on Haswell, but forgot to update the Broadwell
code before landing it. Partially fixes Piglit's max-samplers test.
v2: Use get_element_ud() consistently, rather than using it for the
source but using brw_vec1_grf for the destination..
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
MOV_RAW disables masking, but doesn't force the instruction to be
uncompressed. That needs to be done by hand.
Fixes textureGather and texture offset tests.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Almost every driver already supported it. All current and future
Gallium drivers always support it, and most existing classic drivers
support it.
This only changes radeon and nouveau.
This extension only adds data types that can be passed to, for example,
glTexImage2D. It does not add internal formats. Since you can already
pass GL_FLOAT to glTexImage2D this shouldn't pose any additional issues
with those drivers. Note that r200 and i915 already supported this
extension, and they don't support floating-point textures either.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Half-float TexBOs should require both GL_ARB_half_float_pixel and
GL_ARB_texture_float. This doesn't matter much in practice. Every
driver that supports GL_ARB_texture_buffer_object already supports
GL_ARB_half_float_pixel. We only expose the TexBO extension in core
profiles, and those require GL_ARB_texture_float.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
drivers/common/meta.c: In function '_mesa_meta_CopyTexSubImage':
drivers/common/meta.c:3744:52: warning: unused parameter 'rb' [-Wunused-parameter]
Unfortunately, the parameter can't just be removed because it is part of
the dd_function_table::CopyTexSubImage interface.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
drivers/common/meta.c: In function 'setup_drawpix_texture':
drivers/common/meta.c:1572:30: warning: unused parameter 'texIntFormat' [-Wunused-parameter]
setup_drawpix_texture has never used this paramater. Before the
refactor commit 04f8193aa it was used in several locations. After that
commit, texIntFormat was only used in alloc_texture.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
All of the other meta routines have a particular pattern for creating
and tracking the VAO and VBO. This one function deviated from that
pattern for no apparent reason.
Almost all of the code added in this patch will be removed shortly.
v2: Drop glDeleteBuffers() of the old, now-uninitialized vbo variable.
Fixes getteximage-formats and fbo-mipmap-copypix regression when "2"
landed in the variable (change by anholt).
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Final intermediate step leading to some code sharing. Note that the new
GemerateMipmap and decompress vertex structures are the same as the new vertex
structure in BlitFramebuffer and the others.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Another step leading to some code sharing. Note that the new DrawPixels
vertex structure is the same as the new vertex structure in BlitFramebuffer
and the others.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Another step leading to some code sharing. Note that the new Clear
vertex structure is the same as the new BlitFramebuffer and CopyPixels
vertex structure.
The "sizeof(float) * 7" hack is temporary. It will magically disappear
in a just a couple more patches.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Another step leading to some code sharing. Note that the new CopyPixels
vertex structure is the same as the new BlitFramebuffer vertex
structure.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Initial step of cleaning the exported symbols from targets/omx
- Mark omx_component_library_Setup as public
v2: Keep export-symbols-regex
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com> (v1)
There is no cpp files during the build process, thus we
can safely drop the unused cxxflags.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The function pointer is retrieved via VdpGetProcAddress just
like all the other vdpau functions and should not be exported.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Add VISIBILITY_CFLAGS to automake build, so that
only required symbols are exported.
v2: Rebase
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This symbol is internal and was never part of the API.
Unused by any of the gbm backends, it makes sense to
simply not export it.
Cc: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
VISIBILITY_CFLAGS
Currently the library exports every symbol imaginable,
rather than the ones defined by the API.
Note: This may cause issues for libraries that are linking
agaist libgbm's internals.
Cc: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Currently we create a OPENGL_COMPAT context regardless of
what was requested by the program. Correct that by retaining
the program's request and passing it into _mesa_initialize_context.
Based on a similar commit for radeon/r200 by Ian Romanick.
Cc: "9.1 9.2 10.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Add the explicit note about the required version during configure.
Require the same version (151) of udev when building the pipe-loader.
Mention the udev version requirement in GBM Requires.private.
v2: Resolve a couple of silly typos. Spotted by Ilia
v3: Cleanup platfrom/platform typo. Spotten by Stefan
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
As of recently we dlopen the library, additionally the only
code that is including the libudev.h header, is the loader.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Previously the linking was required due to dependency of udev in the
pipe-loader. Now this is no longer the case, as we dlopen the library.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Previously the linking was required due to dependency of udev in the
pipe-loader. Now this is no longer the case, as we dlopen the library.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
--enable-gallium-llvm is required by radeonsi. Currently we
check only for LLVM_VERSION_INT which is 0, whenever gallium-llvm
is disabled explicitly.
./configure --with-gallium-drivers=r600,radeonsi --disable-gallium-llvm
v2: Correct typo in error message. Spotted by Tom Stellard
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Matt Turner noted the incorrect order, but I somehow forgotten to
change it before pushing upstream. The other one is a typo during rebase.
Signed-off-by: Christian König <christian.koenig@amd.com>
If we don't recognize the PCI ID, we can't reasonably load the driver.
However, calling abort() is quite rude - it means the application that
tried to initialize us (possibly the X server) can't continue via
fallback paths. We already have a more polite mechanism - failing to
create the context. So, just use that.
While we're at it, improve the error message.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73024
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Lu Hua <huax.lu@intel.com>
Consider a multithreaded program with two contexts A and B, and the
following scenario:
1. Context A calls initialize(), which allocates mem_ctx and starts
building built-ins.
2. Context B calls initialize(), which sees mem_ctx != NULL and assumes
everything is already set up. It returns.
3. Context B calls find(), which fails to find the built-in since it
hasn't been created yet.
4. Context A finally finishes initializing the built-ins.
This will break at step 3. Adding a lock ensures that subsequent
callers of initialize() will wait until initialization is actually
complete.
Similarly, if any thread calls release while another thread is still
initializing, or calling find(), the mem_ctx/shader would get free'd while
from under it, leading to corruption or use-after-free crashes.
Fixes sporadic failures in Piglit's glx-multithread-shader-compile.
Bugzilla: https://bugs.freedesktop.org/69200
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "10.1 10.0" <mesa-stable@lists.freedesktop.org>
In the first case, we can simply call stride(mask, 16, 8, 2) rather than
creating a new register with a different stride, then immediately
changing it a second time.
In the second case, the stride was already what we wanted, so we can
just use mask without any changes at all.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
stride(brw_vec1_reg(...) ...) takes some register, changes the strides,
then changes the strides again. Let's do it once.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
this just ties the mesa code to the pre-existing gallium interface,
I'm not sure what to do with the CSO stuff yet.
0.2: fix min/max bounds
Acked-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds GS output and FS input support, even though FS input
support isn't supported until GLSL 4.30 from what I can see.
Signed-off-by: Dave Airlie <airlied@redhat.com>
There are only two sensible placements for 2x MSAA samples - and one is
the mirror image of the other. I chose (0.25, 0.25) and (0.75, 0.75).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
The 4x and 8x cases contained identical code for extracting the X and
Y sample offset values and converting them from U0.4 back to float.
Without this refactoring, we'd have to duplicate it a third time in
order to support 2x MSAA.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Apparently some players are ill-prepared for us claiming that a decoder
exists only to have creating it fail, and express this poor preparation
with crashes (e.g. flash). Check that firmware is there to increase the
chances of there being a high correlation between reported capabilities
and ability to create a decoder.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: 10.0 10.1 <mesa-stable@lists.freedesktop.org>
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
In commit eeed49f5f2, Mark accidentally
renamed MESA_FORMAT_S8_Z24 to MESA_FORMAT_Z24_UNORM_X8_UINT and
MESA_FORMAT_X8_Z24 to MESA_FORMAT_Z24_UNORM_S8_UINT, reversing their
sense. The commit message was correct, but what sed commands actually
got run didn't match that.
This patch swaps the two enum names, reversing them. This should undo
the damage, but might break things if people have manually fixed a few
instances in the meantime...
Mark's commit also failed to mention renames:
s/MESA_FORMAT_ARGB2101010_UINT\b/MESA_FORMAT_B10G10R10A2_UINT/g
s/MESA_FORMAT_ABGR2101010\b/MESA_FORMAT_R10G10B10A2_UNORM/g
but those seem okay.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
nvfx_fragprog_assign_generic only allows for up to 10/8 texcoords for
nv40/nv30. This fixes compilation of the varying-packing tests.
Furthermore it appears that the last 2 inputs on nv4x don't seem to
work in those tests, so just report 8 everywhere for now.
Tested on NV42, NV44. NV4B appears to have additional problems.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: 9.1 9.2 10.0 10.1 <mesa-stable@lists.freedesktop.org>
We don't need to allocate all the state related to GL_ARB_debug_output
until some aspect of that extension is actually needed.
The sizeof(gl_debug_state) is huge (~285KB on 64-bit systems), not even
counting the 54(!) hash tables and lists that it contains. This change
reduces the size of gl_context alone from 431KB bytes to 145KB bytes on
64-bit systems and from 277KB bytes to 78KB bytes on 32-bit systems.
Reviewed-by: Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The WHILE instruction doesn't have UIP. It only has JIP.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
The bits which normally contain the source register descriptions
actually contain the JIP/UIP jump targets, which we already printed.
Interpreting JIP/UIP as source registers results in some really creepy
looking output, like IF statements with acc14.4<0,1,0>UD sources.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Broadwell's 3DSTATE_CLEAR_PARAMS packet expects a floating point value
regardless of format. This means we need to stop converting it to
UNORM.
Storing the value as float would make sense, but since we already have a
uint32_t field, this patch continues shoehorning it into that. In a
sense, this makes mt->depth_clear_value the DWord you emit in the
packet, rather than the clear value itself.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
v2: Fix pasteo of an extra abs being inserted (caught by many). Rewrite
to drop the silly switch statement.
Reviewed-by: Matt Turner <mattst88@gmail.com> (v1)
We've had various bug reports over the years where miptrees are missing,
and when I screwed it up while adding DRI2 to the modesetting driver, I
figured I should put the info necessary for debug here.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This makes it work on Broadwell, too.
v2: Drop bogus double write to 3DPRIM_BASE_VERTEX register
(caught by Chris Forbes).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
This saves some boilerplate and hides the OUT_RELOC/OUT_RELOC64
distinction.
Placing the function in intel_batchbuffer.c is rather arbitrary; there
wasn't really an obvious place for it.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Since commit 9cee3ff562, INTEL_DEBUG=vs
has caused a NULL pointer dereference for fixed-function/ARB programs.
In the vec4 generators, "prog" is a gl_program, and "shader_prog" is the
gl_shader_program. This is different than the FS visitor.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Mesa fails to retain the precision qualifier when parsing:
#version 300 es
centroid in mediump vec2 v;
Consider how the parser's type_qualifier production is applied.
First, the precision_qualifier rule creates a new ast_type_qualifier:
<precision: mediump>
Then the storage_qualifier rule creates a second one:
<flags: in>
and calls merge_qualifier() to fold in any previous qualifications,
returning:
<flags: in, precision: mediump>
Finally, the auxiliary_storage_qualifier creates one for "centroid":
<flags: centroid>
it then does $$ = $1 and $$.flags |= $2.flags, resulting in:
<flags: centroid, in>
Since precision isn't stored in the flags bitfield, it is lost. We need
to instead call merge_qualifier to combine all the fields.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reported-by: Kevin Rogovin <kevin.rogovin@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
If st_GetTexImage() is to decompress the texture, avoid the fallback
path even if prefer_blit_based_texture_transfer = false. For drivers
that returned PIPE_CAP_PREFER_BLIT_BASED_TEXTURE_TRANSFER = 0, we
were always taking the fallback path for texture decompression rather
than rendering a quad. The later is a lot faster.
Cc: "10.0" "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
In the specification text of NV_vertex_program1_1, the upper
limit of the RCC instruction is written as 1.884467e+19 in
scientific notation, but as 0x5F800000 in binary. But the binary
version translates to 1.84467e+19 rather than 1.884467e+19 in
scientific notation.
Since the lower-limit equals 2^-64 and the binary version equals
2^+64, let's assume the value in scientific notation is a typo
and implement this using the value from the binary version
instead.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
_eglInitResource() was used to memset entire _EGLSurface by
writing more than size of pointed target. This does work
as long as Resource is the first element in _EGLSurface,
this patch fixes such dependency.
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
_eglInitResource() was used to memset entire _EGLContext by
writing more than size of pointed target. This does work
as long as Resource is the first element in _EGLContext,
this patch fixes such dependency.
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
If a driver enables ARB_gpu_shader5 and sets Const.MaxVertexSteams >= 4,
then piglit's arb_gpu_shader5-minmax test should now pass.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
In the tests they were the same so it didn't matter, but indications are
that this is the correct behaviour. Also take this opportunity to
(trivially) support using gl_Layer in fp.
Cc: 10.1 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Christoph Bumiller <e0425955@student.tuwien.ac.at>
GLX_ARB_create_context allows making a GLX context current with None
drawable and readables, but this was never implemented correctly in GLX.
We would create a __DRIdrawable for the None GLX drawable and pass that
to the DRI driver and that would somehow work. Now it's somehow broken.
The way this should have worked is that we pass a NULL DRI drawable
to the DRI driver when the GLX user calls glXMakeContextCurrent()
with None for drawable and readables.
https://bugs.freedesktop.org/show_bug.cgi?id=74143
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Flush the context when we unmap a buffer, otherwise VDPAU might
start rendering the next frame while we still reference that buffer.
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: StrangeNoises (rachel@strangenoises.org)
Bugzilla (bug needs XBMC changes as well):
https://bugs.freedesktop.org/show_bug.cgi?id=73191
When VL uploads vertex buffers, it uses PIPE_TRANSFER_DONTBLOCK, which always
flushes the context in the winsys if the buffer being mapped is busy. Since
I added handling of DISCARD_RANGE, DONTBLOCK has had no effect when combined
with DISCARD_RANGE and I think the context isn't flushed anywhere else,
so no commands are submitted to the GPU until the IB is full, which takes
a lot of frames.
Using DISCARD_RANGE is not the only way to trigger this bug. The other way
is to reallocate the vertex buffer before every upload.
BTW, I'm not sure if this is the right place for flushing, but it does fix
the bug.
v2 (chk): move the flush to the right place.
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: StrangeNoises (rachel@strangenoises.org)
v2: This doesn't change the behavior. It only moves the tiling check
to r600_init_resource and removes the usage parameter.
Reviewed-by: Christian König <christian.koenig@amd.com>
Featuring a full grown MPEG2 and H264 decoder and a couple of hundred bugs.
v2 (Leo): fix an error for pic_order_cnt_type 1
v3 (Leo): implement support for field decoding
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
dri2_dup_image was not copying the dri_format field.
This was causing some bugs, for example:
. we create an gbm_bo.
. we get an EGLImage from the gbm_bo.
. Bug: impossible to get again the gbm_bo from the EGLImage by
importing. (gbm dri2 backend)
Signed-off-by: Axel Davy <axel.davy@ens.fr>
This regressed when I converted BRW_REGISTER_TYPE_* to be an abstract
type that doesn't match the hardware description. dump_instruction()
was using reg_encoding[] from brw_disasm.c, which no longer matches
(and was incorrect for Gen8+ anyway).
This patch introduces a new function to convert the abstract enum values
into the letter suffix we expect.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reported-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Mesa now has a real, feature-rich EGL implementation on X11 via xcb.
Therefore I believe there is no longer a practical need for the egl_glx
driver.
Furthermore, egl_glx appears to be unmaintained. The most recent
nontrivial commit to egl_glx was 6baa5f1 on 2011-11-25.
Tested by running weston-smoke in windowed Weston on X with i965.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Kristian Høgsberg <krh@bitplanet.net>
ureg_program is allocated on the heap so we can just bump the
number of immediates that it can handle. It's needed for d3d10.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
We need to handle a lot more immediates and in order to do that
we also switch from allocating this structure on the stack to
allocating it on the heap.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
We only supported up to 256 immediates, which isn't enough. We had
code which was allocating immediates as an allocated array, but it
was always used along a statically backed array for performance
reasons. This commit adds code to skip that performance optimization
and always use just the dynamically allocated immediates if the
number of them is too great.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
The number of allowed temporaries increases almost with every
iteration of an api. We used to support 128, then we started
increasing and the newer api's support 4096+. So if we notice
that the number of temporaries is larger than our statically
allocated storage would allow we just treat them as indexable
temporaries and allocate them as an array from the start.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
If multiple color outputs are written, this shader is unlikely to be
useful with a winsys framebuffer.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The driver is supposed to ensure buffers before any drawing operation, but in
do_blit_drawpixels() and do_blit_copypixels() we inspect the buffer format
before calling intel_prepare_render(). That was covered up by the
unconditional call to intel_prepare_render() in intelMakeCurrent(), but we
now only do this on the initial intelMakeCurrent call for a context
(to get the size for the initial viewport values).
https://bugs.freedesktop.org/show_bug.cgi?id=74083
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Tested-by: Alexander Monakov <amonakov@gmail.com>
This will allow testing of compute shader functionality before it is
completed.
To enable ARB_compute_shader functionality in the i965 driver, set
INTEL_COMPUTE_SHADER=1.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
v2: Document that the 3-element array MaxComputeWorkGroupCount is
indexed by dimension.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
v2: Document that the 3-element array MaxComputeWorkGroupSize is
indexed by dimension.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This patch adds MESA_SHADER_COMPUTE to the gl_shader_stage enum.
Also, where it is trivial to do so, it adds a compute shader case to
switch statements that switch based on the type of shader. This
avoids "unhandled switch case" compiler warnings.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Linker loops that iterate through all the stages in the pipeline need
to use MESA_SHADER_FRAGMENT as a bound, so that we can add an
additional MESA_SHADER_COMPUTE stage, without it being erroneously
included in the pipeline.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Previously, we were really doing F2I. And also move it to generic section.
(Note that for llvmpipe the code generated is definitely bad, due to lack
of unsigned conversions with sse. I think though what llvm does (using scalar
conversions to 64bit signed either with x87 fpu (32bit) or sse (64bit)
including lots of domain changes is quite suboptimal, could do something like
is_large = arg >= 2^31
half_arg = 0.5 * arg
small_c = fptoint(arg)
large_c = fptoint(half_arg) << 1
res = select(is_large, large_c, small_c)
which should be much less instructions but that's something llvm should do
itself.)
This fixes piglit fs/vs-float-uint-conversion.shader_test (maybe more, needs
GL 3.0 version override to run.)
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
This moves the value from the GS shader to the copy shader so the registers
are setup correctly.
fixes tests/spec/glsl-1.50/execution/geometry/clip-distance-out-values.shader_test
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
attempt to calculate a better value for array size to avoid breaking apps.
v2: use 0xfff like streamout, suggested by Grigori
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
cayman has a different end of program bit, so do that properly.
fixes hangs with geom shader tests on cayman.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
set the correct values so the misc out register is setup correctly
for the copy shader.
This also updates the state for the gs copy shader so the hw
gets programmed correctly.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This just makes r600 and evergreen do what the radeonsi codepaths do
for layered rendering. This makes the 2d amd_vertex_shader_layer test
pass on evergreen.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This just adds support for emitting the proper value in the VS out misc.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This just enables the workarounds we have for vertex/pixel shaders
for geom shaders as well.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This follows what fglrx does, it unpacks the input we are
going to indirect into a bunch of registers and indirects
inside them.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
We need to be able to write to the ring using a base register
for when we emit vertices in a loop, in theory the SB compiler
could collapse these indirect writes to direct writes if the
register value is constant and known, but that is outside my
pay grade.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Vadim's code derived it from the info.mode, but it needs
to be takes from the geometry shader output primitive.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
The instance cnt register was missing for a few kernels,
with a new enough kernel we can output it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
If the shader has no CF clauses at all emit an nop
If the last instruction is an ENDLOOP add a NOP for the LOOP to go to
if the last instruction is CALL_FS add a NOP
These fix a bunch of hangs in the geometry shader tests.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
SB needs fixes for three GS instructions it seems to raise
them outside loops etc despite my best efforts.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Although we don't use SB on geom shaders, the VS copy shader will use it
so we might as well implement MEM_RING support in sb.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This can happen in normal operation, so don't report an error on it,
just continue.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This is Vadim's initial work with a few regression fixes squashed in.
v2: (airlied)
fix regression in glsl-max-varyings - need to use vs and ps_dirty
fix regression in shader exports from rebasing.
whitespace fixing.
v2.1: squash fix assert
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
For geometry shaders we need to call this code from a second place.
Just move it out for now to keep future patches cleaner.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From the GLSL 4.40 spec, section 6.4 (Jumps):
The continue jump is used only in loops. It skips the remainder of
the body of the inner most loop of which it is inside. For while
and do-while loops, this jump is to the next evaluation of the
loop condition-expression from which the loop continues as
previously defined.
Previously, we incorrectly treated a "continue" statement as jumping
to the top of a do-while loop.
This patch fixes the problem by replicating the loop condition when
converting the "continue" statement to IR. (We already do a similar
thing in "for" loops, to ensure that "continue" causes the loop
expression to be executed).
Fixes piglit tests:
- glsl-fs-continue-inside-do-while.shader_test
- glsl-vs-continue-inside-do-while.shader_test
- glsl-fs-continue-in-switch-in-do-while.shader_test
- glsl-vs-continue-in-switch-in-do-while.shader_test
Cc: mesa-stable@lists.freedesktop.org
Acked-by: Carl Worth <cworth@cworth.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
In addition to making it public, we also need to change its first
argument from an ir_loop * to an exec_list *, so that it can be used
to insert the condition anywhere in the IR (rather than just in the
body of the loop).
This will be necessary in order to make continue statements work
properly in do-while loops.
Cc: mesa-stable@lists.freedesktop.org
Acked-by: Carl Worth <cworth@cworth.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This is really not needed as blorp blit programs already sample
XRGB normally and get alpha channel set to 1.0 automatically by
the sampler engine. This is simply copied directly to the payload
of the render target write message and hence there is no need for
any additional blending support from the pixel processing pipeline.
The blending formula is anyway broken for color components, it
multiplies the color component with itself (blend factor is the
component itself).
Alpha blending in turn would not fix the alpha to one independent
of the source but simply used the source alpha as is instead
(1.0 * src_alpha + 0.0 * dst_alpha).
Quoting Eric:
"If we want to actually make the no-alpha-bits-present thing work,
we need to override the bits in the surface state or in the
generated code. In the normal draw path, it's done for sampling
by the swizzling code in brw_wm_surface_state.c, and the blending
overrides is just to fix up the alpha blending stage which
doesn't pay attention to that for the destination surface."
If one modifies piglit test gl-3.2-layered-rendering-blit to use
color component values other than zero or one, this change will
kick in on IVB. No regressions on IVB.
This is effectively revert of c0554141a9:
i965/blorp: Support overriding destination alpha to 1.0.
Currently, Blorp requires the source and destination formats to be
equal. However, we'd really like to be able to blit between XRGB and
ARGB formats; our BLT engine paths have supported this for a long time.
For ARGB -> XRGB, nothing needs to occur: the missing alpha is already
interpreted as 1.0. For XRGB -> ARGB, we need to smash the alpha
channel to 1.0 when writing the destination colors. This is fairly
straightforward with blending.
For now, this code is never used, as the source and destination formats
still must be equal. The next patch will relax that restriction.
NOTE: This is a candidate for the 9.1 branch.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
This moves the intel_batchbuffer_flush before the drm_intel_bo_busy
call, which is a change in behavior. However, the old behavior was
broken.
In the future, we may want to only flush in the batchbuffer references
the BO being mapped. That's certainly more typical.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Carl Worth <cworth@cworth.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
This additionally measures the time stalled, while also simplifying the
code.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Carl Worth <cworth@cworth.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Mapping a buffer is a common place where we could stall the CPU.
In a few places, we've added special code to check whether a buffer is
busy and log the stall as a performance warning. Most of these give no
indication of the severity of the stall, though, since measuring the
time is a small hassle.
This patch introduces a new brw_bo_map() function which wraps
drm_intel_bo_map, but additionally measures the time stalled and reports
a performance warning. If performance debugging is not enabled, it
simply maps the buffer with negligable overhead.
We also add a similar wrapper for drm_intel_gem_bo_map_gtt().
This should make it easy to add performance warnings in lots of places.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Carl Worth <cworth@cworth.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Hw binning pass doesn't seem to have broken anything. And optimizing
compiler fixes a lot of shaders and doesn't seem to break anything. So
re-org slightly FD_MESA_DEBUG params and make both hw binning and
optimizer enabled by default.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
The new compiler generates a dependency graph of instructions, including
a few meta-instructions to handle PHI and preserve some extra
information needed for register assignment, etc.
The depth pass assigned a weight/depth to each node (based on sum of
instruction cycles of a given node and all it's dependent nodes), which
is used to schedule instructions. The scheduling takes into account the
minimum number of cycles/slots between dependent instructions, etc.
Which was something that could not be handled properly with the original
compiler (which was more of a naive TGSI translator than an actual
compiler).
The register assignment is currently split out as a standalone pass. I
expect that it will be replaced at some point, once I figure out what to
do about relative addressing (which is currently the only thing that
should cause fallback to old compiler).
There are a couple new debug options for FD_MESA_DEBUG env var:
optmsgs - enable debug prints in optimizer
optdump - dump instruction graph in .dot format, for example:
http://people.freedesktop.org/~robclark/a3xx/frag-0000.dot.pnghttp://people.freedesktop.org/~robclark/a3xx/frag-0000.dot
At this point, thanks to proper handling of instruction scheduling, the
new compiler fixes a lot of things that were broken before, and does not
appear to break anything that was working before[1]. So even though it
is not finished, it seems useful to merge it in it's current state.
[1] Not merged in this commit, because I'm not sure if it really belongs
in mesa tree, but the following commit implements a simple shader
emulator, which I've used to compare the output of the new compiler to
the original compiler (ie. run it on all the TGSI shaders dumped out via
ST_DEBUG=tgsi with various games/apps):
163b6306b1
Signed-off-by: Rob Clark <robclark@freedesktop.org>
For the time being, keep old compiler as fallback for things that the
new compiler does not support yet. Split out as it's own commit to make
the later new-compiler commits easier to follow.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Not really used for anything anymore. So strip it out and avoid
conflicting symbols with upcoming new-compiler.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
When we clipped a line weren't copying the provoking vertex
color to the second vertex. We also weren't checking for
first vs. last provoking vertex.
Fixes failures found with the new piglit line-flat-clip-color test.
Cc: "10.0, 10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
This has been wrong for many years. It was originally 0x000FFFFF and long
ago there was discussion about whether GL_ALL_ATTRIB_BITS should include
the then-new GL_MULTISAMPLE_BIT bit. Eventually the ARB decided that
glPushAttrib(GL_ALL_ATTRIB_BITS) should save all current and future
attribute groups (hence ~0). Unfortunately, Mesa's gl.h was never updated.
This was just recently spotted by Eric Anholt and reported as a bug to the
ARB. Ian, Jon Leech and I discussed it at the ARB meeting and decided to
change Mesa's value to reflect the ARB's decision.
Acked-by: Eric Anholt <eric@anholt.net>
If the shader is too large, plug in a dummy shader. This patch also
reworks the existing dummy shader code.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
gallivm soa code supported only a single level of nesting for
control flow opcodes (if, switch, loops...) but the d3d10 spec
clearly states that those are nested within functions. To support
nesting of conditionals inside functions we need to store the
nesting data inside function contexts and keep a stack of those.
Furthermore we make sure that if nesting for subroutines is deeper
than 32 then we simply ignore all subsequent 'call' invocations.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
DirectX and most hardware documentation use the term "Index Buffer" to
refer to a buffer containing indexes into arrays of vertex data, which
allows random access to vertex data, rather than sequential access.
OpenGL uses a different term for this concept: "Element Array Buffer".
However, "Index Buffer" has become much more widespread. A quick
Google search shows 29,300 hits for "Element Array Buffer" vs.
82,300 hits for "Index Buffer."
Arguably, "Index Buffer" is clearer: an "element of an array" (or list)
usually refers to an actual item stored in the array, not the index used
to refer to it.
The terminology is also already used in Mesa: some VBO module code for
dealing with ElementArrayBufferObj names local variables "ib".
Completely generated by:
$ find . -type f -print0 | xargs -0 sed -i \
's/ElementArrayBufferObj/IndexBufferObj/g'
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
For consistency with the previous renames.
Completely generated by:
$ find . -type f -print0 | xargs -0 sed -i \
's/_mesa_lookup_arrayobj/_mesa_lookup_vao/g'
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
_mesa_update_vao_client_arrays() is less of a mouthful than
_mesa_update_array_object_client_arrays(), and generally clearer.
Generated by:
$ find . -type f -print0 | xargs -0 sed -i \
's/_mesa_\([^_]*\)_array_object/_mesa_\1_vao/g'
with manual whitespace and indentation fixes applied.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
I considered replacing it with "gl_vao", but spelling it out seemed to
fit better with Mesa's traditional style. Mesa doesn't shy away from
long type names - consider gl_transform_feedback_object,
gl_fragment_program_state, gl_uniform_buffer_binding, and so on.
Completely generated by:
$ find . -type f -print0 | xargs -0 sed -i \
's/gl_array_object/gl_vertex_array_object/g'
v2: Rerun command to resolve conflicts with Ian's meta patches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Now that the field is named "VAO" instead of "ArrayObj", it makes sense
to call the local variables "vao" instead of "arrayObj".
Completely generated by:
$ find . -type f -print0 | xargs 0 sed -i 's/arrayObj/vao/g'
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
When reading through the Mesa drawing code, it's not immediately obvious
to me that "ArrayObj" (gl_array_object) is the Vertex Array Object (VAO)
state. The comment above the structure explains this, but readers still
have to remember this and translate accordingly.
Out of context, "array object" is a fairly vague. Even in context,
"array" has a lot of meanings: glDrawArrays, vertex data stored in user
arrays, gl_client_arrays, gl_vertex_attrib_arrays, and so on.
Using the term "VAO" immediately associates these fields with the OpenGL
concept, clarifying the situation and aiding programmer sanity.
Completely generated by:
$ find . -type f -print0 | xargs -0 sed -i \
-e 's/ArrayObj;/VAO;/g' \
-e 's/->ArrayObj/->VAO/g' \
-e 's/Array\.ArrayObj/Array.VAO/g' \
-e 's/Array\.DefaultArrayObj/Array.DefaultVAO/g'
v2: Rerun command to resolve conflicts with Ian's meta patches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
2014-02-03 00:52:58 -08:00
1366 changed files with 84252 additions and 39861 deletions
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=58660">Bug 58660</a> - CAYMAN broken with HyperZ on</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=64471">Bug 64471</a> - Radeon HD6570 lockup in Brütal Legend with HyperZ</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=66352">Bug 66352</a> - GPU lockup in L4D2 on TURKS with HyperZ</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=68799">Bug 68799</a> - [APITRACE] Hyper-Z lockup with Falcon BMS 4.32u6 on CAYMAN</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=71547">Bug 71547</a> - compilation failure :#error "SSE4.1 instruction set not enabled"</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=72685">Bug 72685</a> - [radeonsi hyperz] Artifacts in Unigine Sanctuary</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=73088">Bug 73088</a> - [HyperZ] Juniper (6770): Gone Home / Unigine Heaven 4.0 lock up system after several minutes of use</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=74428">Bug 74428</a> - hyperz causes gpu hang in Counter-strike: Source</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=74803">Bug 74803</a> - [r600g] HyperZ broken on RV630 (Cogs shadows are broken)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=74863">Bug 74863</a> - [r600g] HyperZ broken on RV770 and CYPRESS (Left 4 Dead 2 trees corruption) bisected!</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=74892">Bug 74892</a> - HyperZ GPU lockup with radeonsi 7970M PITCAIRN and Distance Alpha game</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=77865">Bug 77865</a> - [BDW] Many Ogles3conform framebuffer_blit cases fail</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=78581">Bug 78581</a> - OpenCL: clBuildProgram prints error messages directly rather than storing them</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=79029">Bug 79029</a> - INTEL_DEBUG=shader_time is full of lies</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=79729">Bug 79729</a> - [i965] glClear on a multisample texture doesn't work</li>
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
