radeon_llvm_emit_prepare_cube_coords uses coords[4] in some cases (TXB2 etc.)
Discovered by Coverity. Reported by Ilia Mirkin.
Cc: 10.5 10.4 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit a984abdad3)
The code for emitting INTEL_swap_events swap completion
events needs to translate from 32-Bit sbc on the wire to
64-Bit sbc for the events and handle wraparound accordingly.
It assumed that events would be sent by the server in the
order their corresponding swap requests were emitted from
the client, iow. sbc count should be always increasing. This
was correct for DRI2.
This is not always the case under the DRI3/Present backend,
where the Present extension can execute presents and send out
completion events in a different order than the submission
order of the present requests, due to client code specifying
targetMSC target vblank counts which are not strictly
monotonically increasing. This confused the wraparound
handling. This patch fixes the problem by handling 32-Bit
wraparound in both directions. As long as successive swap
completion events real 64-Bit sbc's don't differ by more
than 2^30, this should be able to do the right thing.
How this is supposed to work:
awire->sbc contains the low 32-Bits of the true 64-Bit sbc
of the current swap event, transmitted over the wire.
glxDraw->lastEventSbc contains the low 32-Bits of the 64-Bit
sbc of the most recently processed swap event.
glxDraw->eventSbcWrap is a 64-Bit offset which tracks the upper
32-Bits of the current sbc. The final 64-Bit output sbc
aevent->sbc is computed from the sum of awire->sbc and
glxDraw->eventSbcWrap.
Under DRI3/Present, swap completion events can be received
slightly out of order due to non-monotic targetMsc specified
by client code, e.g., present request submission:
Submission sbc: 1 2 3
targetMsc: 10 11 9
Reception of completion events:
Completion sbc: 3 1 2
The completion sequence 3, 1, 2 would confuse the old wraparound
handling made for DRI2 as 1 < 3 --> Assumes a 32-Bit wraparound
has happened when it hasn't.
The client can queue multiple present requests, in the case of
Mesa up to n requests for n-buffered rendering, e.g., n = 2-4 in
the current Mesa GLX DRI3/Present implementation. In the case of
direct Pixmap presents via xcb_present_pixmap() the number n is
limited by the amount of memory available.
We reasonably assume that the number of outstanding requests n is
much less than 2 billion due to memory contraints and common sense.
Therefore while the order of received sbc's can be a bit scrambled,
successive 64-Bit sbc's won't deviate by much, a given sbc may be
a few counts lower or higher than the previous received sbc.
Therefore any large difference between the incoming awire->sbc and
the last recorded glxDraw->lastEventSbc will be due to 32-Bit
wraparound and we need to adapt glxDraw->eventSbcWrap accordingly
to adjust the upper 32-Bits of the sbc.
Two cases, correponding to the two if-statements in the patch:
a) Previous sbc event was below the last 2^32 boundary, in the previous
glxDraw->eventSbcWrap epoch, the new sbc event is in the next 2^32
epoch, therefore the low 32-Bit awire->sbc wrapped around to zero,
or close to zero --> awire->sbc is apparently much lower than the
glxDraw->lastEventSbc recorded for the previous epoch
--> We need to increment glxDraw->eventSbcWrap by 2^32 to adjust
the current epoch to be one higher than the previous one.
--> Case a) also handles the old DRI2 behaviour.
b) Previous sbc event was above closest 2^32 boundary, but now a
late event from the previous 2^32 epoch arrives, with a true sbc
that belongs to the previous 2^32 segment, so the awire->sbc of
this late event has a high count close to 2^32, whereas
glxDraw->lastEventSbc is closer to zero --> awire->sbc is much
greater than glXDraw->lastEventSbc.
--> We need to decrement glxDraw->eventSbcWrap by 2^32 to adjust
the current epoch back to the previous lower epoch of this late
completion event.
We assume such a wraparound to a higher (a) epoch or lower (b)
epoch has happened if awire->sbc and glxDraw->lastEventSbc differ
by more than 2^30 counts, as such a difference can only happen
on wraparound, or if somehow 2^30 present requests would be pending
for a given drawable inside the server, which is rather unlikely.
v2: Explain the reason for this patch and the new wraparound handling
much more extensive in commit message, no code change wrt. initial
version.
Cc: "10.3 10.4 10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit cc5ddd584d)
For example if width were 65, the first slice would get 96 while the
second would get 32. However the hardware appears to expect the second
pitch to be 64, based on halving the 96 (and aligning up to 32).
This fixes texelFetch piglit tests on a3xx below a certain size. Going
higher they break again, but most likely due to unrelated reasons.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 620e29b748)
The piglit test glsl-fs-uniform-array-loop-unroll.shader_test was designed
to do an out of bounds access into an uniform array to make sure that we
handle that situation gracefully inside the driver, however, as Ken describes
in bug 79202, Valgrind reports that this is leading to an out-of-bounds access
in fs_visitor::demote_pull_constants().
Before accessing the pull_constant_loc array we should make sure that
the uniform we are trying to access is valid.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79202
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 6ac1bc90c4)
Nominated-by: Matt Turner <mattst88@gmail.com>
Was resulting in gl_PointSize write being optimized out, causing
particle system type shaders to hang if hw binning enabled.
Fixes neverball, OGLES2ParticleSystem, etc.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 60096ed906)
This fixes the GL_COMPRESSED_RED_RGTC1 part of piglit's rgtc-teximage-01
test as well as the precision part of Wine's 3dc format test (fd.o bug
89156).
The Z component seems to contain a lower precision version of the
result, probably a temporary value from the decompression computation.
The Y and W component contain different data that depends on the input
values as well, but I could not make sense of them (Not that I tried
very hard).
GL_COMPRESSED_SIGNED_RED_RGTC1 still seems to have precision problems in
piglit, and both formats are affected by a compiler bug if they're
sampled by the shader with a swizzle other than .xyzw. Wine uses .xxxx,
which returns random garbage.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89156
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Cc: 10.5 10.4 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f710b99071)
The file is auto-generated, and #included by formats.c. Let's rename it
to reflect the latter. This will also help up fix the dependency
tracking by adding it to the _SOURCES variable, without the side effect
of it being compiled (twice).
v2: Update .gitignore to reflect the rename.
Cc: "10.4, 10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 3f6c28f2a9)
Conflicts:
src/mesa/Makefile.am
src/mesa/main/.gitignore
Since commit 28f3f8d, indices generator take a start parameter. However, some
index values have been left to start at 0.
This fixes the glean/fbo test with the virgl driver, and copytexsubimage
with freedreno.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 073a5d2e84)
Missed out by commit 39ae85732d2(mesa: Fix error validating args for
TexSubImage3D)
Reported-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
There is a bug in the current lowering pass implementation where we lower saturate
to clamp only for vertex shaders on drivers supporting SM 3.0. The correct behavior
is to actually lower to clamp only when we don't support saturate which happens
on drivers that don't support SM 3.0
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
(cherry picked from commit 49e0431211)
Nominated-by: Matt Turner <mattst88@gmail.com>
This is a fix for a regression introduced in commit a9f8296d ("i965/fs:
Preserve the CFG in a few more places.").
The errata this code works around is described in a comment before the function:
"[DevBW, DevCL] Errata: A destination register from a send can not be
used as a destination register until after it has been sourced by an
instruction with a different destination register.
The framebuffer write's sources must be in message registers, which SEND
instructions cannot have as a destination. There's no way for this
errata to affect anything at the end of the program. Just remove the
code.
Cc: 10.4, 10.5 <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84613
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit e214000f25)
Previously, we compared our new GS-out VUE map to the existing *VS*-out
VUE map, which is bogus.
This would mostly manifest as redundant dirty flagging where the GS is
in use but the VS and GS output layouts differ; but there is a scary
case where we would fail to flag a GS-out layout change if it happened
to match the VS-out layout.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Cc: "10.5, 10.4" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88885
(cherry picked from commit b51ff50a76)
The length argument passed to sysctl was the size of the pointer
not the type. The result of this is sysctl calls would fail on
32 bit BSD/Mac OS X.
Additionally the wrong pointer was passed as an argument to store
the result of the sysctl call.
Cc: "10.4, 10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 7983a3d2e0)
There were some bugs, and the code was really difficult to follow. We
would optimize
min(max(x, b), 1.0) into max(sat(x), b)
but not pay attention to the order of min/max and also do
max(min(x, b), 1.0) into max(sat(x), b)
Corrects four shaders from Champions of Regnum that do
min(max(x, 1), 10)
and corrects rendering of Mass Effect under VMware Workstation.
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89180
Reviewed-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit cb25087c7b)
If the renderer supports the core profile the query returned incorrectly
0x8 as value, because it was using (1U << __DRI_API_OPENGL_CORE) for the
returned value.
The same happened with the compatibility profile. It returned 0x1
(1U << __DRI_API_OPENGL) instead of 0x2.
Internal DRI defines:
dri_interface.h: #define __DRI_API_OPENGL 0
dri_interface.h: #define __DRI_API_OPENGL_CORE 3
Those two bits are supposed for internal usage only and should be
translated to GLX_CONTEXT_CORE_PROFILE_BIT_ARB (0x1) for a preferred
core context profile and GLX_CONTEXT_COMPATIBILITY_PROFILE_BIT_ARB (0x2)
for a preferred compatibility context profile.
This patch implements the above translation in the glx module.
v2: Fix the incorrect behavior in the glx module
Cc: "10.3 10.4 10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 6d164f65c5)
poc counter should be reset with IDR frame,
otherwise there would be a re-order issue with
frames before and after IDR
v2: add commit message
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 9c7b343bc0)
With earlier commit (install-lib-links: don't depend on .libs directory)
we moved the location of the file from .libs/ to the current dir.
Although we did not attribute that in the former case autotools was
doing us a favour and removing the file. Explicitly remove the file at
clean-local time, otherwise we'll end up with dangling files.
Cc: "10.3 10.4 10.5" <mesa-stable@lists.freedesktop.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit fece147be5)
The zoffset and depth values were not being considered when calling
error_check_subtexture_dimensions().
Fixes 2 dEQP tests:
* dEQP-GLES3.functional.negative_api.texture.texsubimage3d_neg_offset
* dEQP-GLES3.functional.negative_api.texture.texsubimage3d_invalid_offset
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "10.4 10.5" <mesa-stable@lists.freedestkop.org>
(cherry picked from commit 2aa71e9485)
[Emil Velikov: Resolve trivial conflicts]
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Conflicts:
src/mesa/main/teximage.c
Broken by a27b74819a.
This fix is critical and should be ported to stable ASAP.
Cc: 10.5 10.4 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 7820a11e3d)
Squashed with commit
radeonsi: fix a warning caused by previous commit
Cc: 10.5 10.4 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 050bf75c8b)
[Emil Velikov: The file was renamed si_state_{shaders,draw}.c]
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Conflicts:
src/gallium/drivers/radeonsi/si_state_shader.c
Use pipe_sampler_view_reference() instead of ordinary assignment.
Also add a new sanity check assertion.
Fixes piglit gl-1.0-drawpixels-color-index test crash. But note
that the test still fails.
Cc: "10.4, 10.5" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
(cherry picked from commit 62a8883f32)
This snippet can be included in Makefiles that may, depending on the
project configuration, not actually build any installable libraries.
In that case we don't have anything to depend on and this part of
the makefile may be executed before the .libs directory is created,
so do not depend on it being there.
Cc: "10.3 10.4 10.5" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
(cherry picked from commit 5c1aac17ad)
opt_copy_propagation and opt_copy_propagation_elements create new ACP
and Kill sets each time they enter a new control flow block. For if
blocks, they also copy the entire existing ACP set contents into the
new set.
When we exit the control flow block, we discard the new sets. However,
we weren't freeing them - so they lived on until the pass finished.
This can waste a lot of memory (57MB on one pessimal shader).
This patch makes the pass allocate ACP entries using this->acp as the
memory context, and Kill entries out of this->kill. It also steals
kill entries when moving them from the inner kill list to the parent.
It then frees the lists, including their contents.
v2: Move ralloc_free(this->acp) just before this->acp = orig_acp
(suggested by Eric Anholt).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "10.5 10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 76960a55e6)
Previously array textures were not working with GetCompressedTextureImage,
leading to failures in the test
arb_direct_state_access/getcompressedtextureimage.c.
Tested-by: Laura Ekstrand <laura@jlekstrand.net>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: "10.4, 10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 92163482bd)
+ minor indentation fixes
Discovered by Axel Davy.
This can't be reproduced with any app, because all state trackers set a DSA
state first.
Cc: 10.5 10.4 10.3 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
(cherry picked from commit 2ead74888a)
If a transform feedback buffer's size is 0, st_bufferobj_data doesn't
end up creating a buffer for it. There's no point in trying to write to
such a buffer, so just pretend as if it's not really there.
This fixes arb_gpu_shader5-xfb-streams-without-invocations on nvc0.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 80d373ed5b)
A nomination unadorned with a specific version is now interpreted as
being aimed at the 10.5 branch, which was recently opened.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Commit f82f2fb3dc added use of the Mesa
IR optimizer for both ARB_fragment_program and ARB_vertex_program, but
only justified the vertex-program portions with measured performance
improvements.
Meanwhile, the optimizer was seen to generate hundreds of unused
immediates without discarding them, causing failures.
Discard the use of the optimizer for now to fix the regression. (In
the future, we anticpate things moving from Mesa IR to NIR for better
optimization anyway.)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82477
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
CC: "10.3 10.4 10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 55a57834bf)
The hardware's integer luminance formats are completely unusable;
currently we fall back to RGBA. This means we need to override
the texture swizzle to obtain the XXX1 values expected for luminance
formats.
Fixes spec/EXT_texture_integer/texwrap formats bordercolor [swizzled]
on Broadwell - 100% of border color tests now pass on Broadwell.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 8cb18760cc)
The latter currently implies CPU read access, so only PIPE_USAGE_STAGING
can be expected to be fast.
Mesa demos src/tests/streaming_rect on Kaveri (radeonsi):
Unpatched: 42 frames in 1.023 seconds = 41.056 FPS
Patched: 615 frames in 1.000 seconds = 615.000 FPS
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88658
Cc: "10.3 10.4" <mesa-stable@lists.freedestkop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit a338dc0186)
The FILLED_SIZE counter is uninitialized at the beginning, so we can't use it.
Instead, use offset = 0, which is what we always do when not appending.
This unexpectedly fixes spec/ARB_texture_multisample/sample-position/*.
Yes, the test does use transform feedback.
Cc: 10.3 10.4 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Glenn Kennard <glenn.kennard@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit 658f1d4cfe)
xfont.c:237:14: error: implicit declaration of function 'GetGLXDRIDrawable' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
glxdraw = GetGLXDRIDrawable(CC->currentDpy, CC->currentDrawable);
^
Fixes regression from 291be28476
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
(cherry picked from commit e68b67b53f)
../../../src/mesa/main/compiler.h:47:10: fatal error: 'util/macros.h' file not found
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
(cherry picked from commit 1c67a5687a)
Change max_wm_threads to match the spec on CHV. The max number of
threads in 3DSTATE_PS is always programmed to 64 and the hardware
internally scales that depending on the GT SKU. So this doesn't
change the max number of threads actually used, but it does affect
the scratch space calculation.
On CHV the old value was too small, so the amount of scratch space
allocated wasn't sufficient to satisfy the actual max number of
threads used.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 99754446ab)
Restores proper immediate tearing swap behaviour for
OpenGL bufferswap under DRI3/Present.
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
v2: Add Frank Binns signed off by for his original earlier
patch from April 2014, which is identical to this one, and
Chris Wilsons reviewed tag from May 2014 for that patch, ergo
also for this one.
v3: Incorporate comment about triple buffering as suggested
by Axel Davy, and reference to relevant spec provided by
Eric Anholt.
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 455d3036fa)
The _mesa_dlist_alloc() function is only guaranteed to return a pointer
with 4-byte alignment. On 64-bit systems which don't support unaligned
loads (e.g. SPARC or MIPS) this could lead to a bus error in the VBO code.
The solution is to add a new _mesa_dlist_alloc_aligned() function which
will return a pointer to an 8-byte aligned address on 64-bit systems.
This is accomplished by inserting a 4-byte NOP instruction in the display
list when needed.
The only place this actually matters is the VBO code where we need to
allocate a 'struct vbo_save_vertex_list' which needs to be 8-byte
aligned (just as if it were malloc'd).
The gears demo and others hit this bug.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88662
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
(cherry picked from commit 53b01938ed)
When the shader does indirect addressing on the constants,
we allocate a temporary constant buffer to which we copy
the constants from the app given user constants and
the constants filled in the shader.
This patch makes this buffer be allocated once.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f8a74410f1)
Relative addressing needs the constant buffer to get all
the correct constants, even those defined by the shader.
The code to copy the shader constants to the constant buffer
was enabled only for debug build. Enable it always.
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
(cherry picked from commit a721987077)
The fix is that this line:
"src[s] = tx->regs.vT[s];" is wrong if s doesn't start from 0.
Instead access tx->regs.vT directly when needed.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 7865210670)
Conflicts:
src/gallium/state_trackers/nine/nine_shader.c
texcoord for ps < 1_4 should clamp between 0 and 1 the values.
texcrd (texcoord ps 1_4) does not clamp and can be used with
two modifiers _dw and _dz that means the channels are divided
by w or z.
Implement those in shared code, since the same modifiers can be used
for texld ps 1_4.
v2: replace DIV by RCP + MUL
v3: Remove an useless MOV
Reviewed-by: Tiziano Bacocco <tizbac2@gmail.com>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 5399119fb1)
Conflicts:
src/gallium/state_trackers/nine/nine_shader.c
Previous implementation didn't work well with nested loops.
Instead of using several address registers, put a0 and aL
into normal registers, and copy them to one address register when
we need to use them.
Wine tests loop_index_test() and nested_loop_test() now pass correctly.
Fixes r600g crash while loading Bioshock -
bug https://bugs.freedesktop.org/show_bug.cgi?id=85696
Tested-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Tiziano Bacocco <tizbac2@gmail.com>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 6a8e5e48be)
When the input's xyz are 0.0, the output
should be 0.0. This is due to the fact that
Inf * 0 = 0 for dx9. To handle this case,
cap the result of RSQ to FLT_MAX. We have
FLT_MAX * 0 = 0.
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f5e8e3fb80)
We should use the absolute value of the input as input to ureg_RSQ.
Moreover, an input of 0.0 should return FLT_MAX.
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 2487f73574)
Let's say we have c1 and c2 declared in the shader and c0 given by the app
Then here we would have read c0, c1 and c2 given by the app, instead
of the correct c0, c1, c2.
This correction fixes several issues in some games.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 53dc992f20)
Convert them to shader booleans at earlier stage.
Previous code is fine, but later patch will make
integers being converted at earlier stage, so do
the same for booleans
Reviewed-by: Tiziano Bacocco <tizbac2@gmail.com>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit d9d18fe39f)
Buffers in the MANAGED pool are supposed to have the content in a ram buffer,
a copy in VRAM if there is enough memory (driver manages memory and decide when
to delete the buffer in VRAM).
This is not implemented properly in nine, and a VRAM copy is going to be created
when the RAM memory is filled, and the VRAM copy will get synced with the RAM
memory updates.
Due to some issues (in the implementation or in app logic), it can happen
we try to create a sampler view of the resource while we haven't created the
VRAM resource. This hack creates the resource when we hit this case, which prevents
crashing, but doesn't help with the resource content.
This fixes several games crashing at launch.
Acked-by: Axel Davy <axel.davy@ens.fr>
Acked-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Stanislaw Halik <sthalik@misaki.pl>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 82810d3b66)
While previous code was having the correct behaviour in general,
this new code is more readable (without checking all gallium formats
manually) and has a more defined behaviour for depth stencil resources.
Reviewed-by: Tiziano Bacocco <tizbac2@gmail.com>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 47280d777d)
The implicit swapchains are destroyed when the device instance is
destroyed. However for non-implicit swapchains, it is not the case,
and the application can have kept an reference on the swapchain
buffers to reuse them.
Fixes problems with battle.net launcher.
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
Tested-by: Nick Sarnie <commendsarnex@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
(cherry picked from commit 0d2c22e648)
This->surfaces contains the surfaces associated to the levels
and faces. This->surfaces[6*Level] is what we want here,
since it gives us a face descriptor for the level 'Level'.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Xavier Bouchoux <xavierb@gmail.com>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 9232161178)
The cap means D3DFVF_XYZRHW vertices will see clipping.
This is not the case when
PIPE_CAP_TGSI_VS_WINDOW_SPACE_POSITION is supported, since
it'll disable clipping.
Reviewed-by: Tiziano Bacocco <tizbac2@gmail.com>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 05e20e1045)
This was the only state tracker emitting it, and hardware was just having
to lower it anyway (or failing to lower it at all).
v2: Extracted from a larger patch by Jose (which also dropped DP2A), fixed
to actually not reference TGSI_OPCODE_CND. Change by anholt.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: David Heidelberg <david@ixit.cz>
(cherry picked from commit 925cb75f89)
Gen4 hardware appears to GPU hang frequently when using Chromium, and
also when running 'glmark2 -b ideas'. Most of the error states contain
3DPRIMITIVE commands in quick succession, with very few state packets
between them - usually VERTEX_BUFFERS/ELEMENTS and CONSTANT_BUFFER.
I trimmed an apitrace of the glmark2 hang down to two draw calls with a
glUniformMatrix4fv call between the two. Either draw by itself works
fine, but together, they hang the GPU. Removing the glUniform call
makes the hangs disappear. In the hardware state, this translates to
removing the CONSTANT_BUFFER packet between the two 3DPRIMITIVE packets.
Flushing before emitting CONSTANT_BUFFER packets also appears to make
the hangs disappear. I observed a slowdown in glxgears by doing it all
the time, so I've chosen to only do it when BRW_NEW_BATCH and
BRW_NEW_PSP are unset (i.e. we haven't done a CS_URB_STATE change or
already flushed the whole pipeline).
I'd much rather understand the problem, but at this point, I don't see
how we'd ever be able to track it down further. We have no real tools,
and the hardware people moved on years ago. I've analyzed 20+ error
states and read every scrap of documentation I could find.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80568
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85367
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Matt Turner <mattst88@gmail.com>
Cc: "10.4 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit c4fd0c9052)
This patch fixes the return of a wrong value when x is lower than
-MAX_INT(src_bits) as the result would not be between [-1.0 1.0].
v2 by Samuel Iglesias <siglesias@igalia.com>:
- Modify snorm_to_float() to avoid doing the division when
x == -MAX_INT(src_bits)
Cc: 10.4 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
(cherry picked from commit 7d1b08ac44)
When doing repclears, we only want to use the SIMD16 program, not the
SIMD8 one. Kristian added this to the Gen7+ code, but apparently we
missed it in the Gen6 code. This patch copies that code over.
Approximately doubles the performance in a clear microbenchmark from
mesa-demos (clearspd -width 500 -height 500 +color) on Sandybridge.
Cc: "10.4 10.3" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
References: https://code.google.com/p/chrome-os-partner/issues/detail?id=34681
(cherry picked from commit f95733ddb7)
Conflicts:
src/mesa/drivers/dri/i965/gen6_wm_state.c
r600, rv610 and rv630 all have a bug in their GPR indexing
and how the hw inserts access to PV.
If the base index for the src is the same as the dst gpr
in a previous group, then it will use PV instead of using
the indexed gpr correctly.
The workaround is to insert a NOP when you detect this.
v2: add second part of fix detecting DST rel writes followed
by same src base index reads.
v3: forget adding stuff to structs, just iterate over the
previous node group again, makes it more obvious.
v3.1: drop local_nop.
Fixes ~200 piglit regressions on rv635 since SB was introduced.
Reviewed-By: Glenn Kennard <glenn.kennard@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 3c8ef3a74b)
Since d8da6decea where the
state tracker started using UCMP on cayman a number of tests
regressed.
this seems to be r600g is doing CNDGE_INT for UCMP which is >= 0,
we should be doing CNDE_INT with reverse arguments.
Reviewed-by: Glenn Kennard <glenn.kennard@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 0d4272cd8e)
From GL 4.4 Core profile:
If both PRIMITIVE_RESTART and PRIMITIVE_RESTART_FIXED_INDEX are
enabled, the index value determined by PRIMITIVE_RESTART_FIXED_INDEX is
used. If PRIMITIVE_RESTART_FIXED_INDEX is enabled, primitive restart is not
performed for array elements transferred by any drawing command not taking a
type parameter, including all of the *Draw* commands other than *DrawEle-
ments*.
Cc: 10.2 10.3 10.4 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 8f5d309521)
The "normal" detection (querying clflush size) already made sure it is
non-zero, however another method did not. This lead to crashes if this
value happened to be zero (apparently can happen in virtualized environments
at least).
This fixes https://bugs.freedesktop.org/show_bug.cgi?id=87913
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 5fea39ace3)
The code used PIPE_ALIGN_VAR for the variable used by fxsave, however this
does not work if the stack isn't aligned. Hence use PIPE_ALIGN_STACK function
decoration to fix the segfault which can happen if stack alignment is only
4 bytes.
This fixes https://bugs.freedesktop.org/show_bug.cgi?id=87658.
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit b59c7ed0ab)
This patch reduces the likelihood of pointer arithmetic overflow bugs in
gather_oa_results(), like the one fixed by b69c7c5dac.
I haven't yet encountered any overflow bugs in the wild along this
patch's codepath. But I get nervous when I see code patterns like this:
(void*) + (int) * (int)
I smell 32-bit overflow all over this code.
This patch retypes 'snapshot_size' to 'ptrdiff_t', which should fix any
potential overflow.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
(cherry picked from commit 414be86c96)
This patch reduces the likelihood of pointer arithmetic overflow bugs in
intel_texsubimage_tiled_memcpy() , like the one fixed by b69c7c5dac.
I haven't yet encountered any overflow bugs in the wild along this
patch's codepath. But I recently solved, in commit b69c7c5dac, an overflow
bug in a line of code that looks very similar to pointer arithmetic in
this function.
This patch conceptually applies the same fix as in b69c7c5dac. Instead
of retyping the variables, though, this patch adds some casts. (I tried
to retype the variables as ptrdiff_t, but it quickly got very messy. The
casts are cleaner).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
(cherry picked from commit 225a09790d)
This is a partial revert of c89306983c.
It split the {start,base}_vertex_location handling into several steps:
1. Set brw->draw.start_vertex_location = prim[i].start
and brw->draw.base_vertex_location = prim[i].basevertex.
(This happened once per _mesa_prim, in the main drawing loop.)
2. Add brw->vb.start_vertex_bias and brw->ib.start_vertex_offset
appropriately. (This happened in brw_prepare_shader_draw_parameters,
which was called just after brw_prepare_vertices, as part of state
upload, and only happened when BRW_NEW_VERTICES was flagged.)
3. Use those values when emitting 3DPRIMITIVE (once per _mesa_prim).
If we drew multiple _mesa_prims, but didn't flag BRW_NEW_VERTICES on
the second (or later) primitives, we would do step #1, but not #2.
The first _mesa_prim would get correct values, but subsequent ones
would only get the first half of the summation.
The reason I originally did this was because I needed the value of
gl_BaseVertexARB to exist in a buffer object prior to uploading
3DSTATE_VERTEX_BUFFERS. I believed I wanted to upload the value
of 3DPRIMITIVE's "Base Vertex Location" field, which was computed
as: (prims[i].indexed ? prims[i].start : prims[i].basevertex) +
brw->vb.start_vertex_bias. The latter value wasn't available until
after brw_prepare_vertices, and the former weren't available in the
state upload code at all. Hence the awkward split.
However, I believe that including brw->vb.start_vertex_bias was a
mistake. It's an extra bias we apply when uploading vertex data into
VBOs, to move [min_index, max_index] to [0, max_index - min_index].
>From the GL_ARB_shader_draw_parameters specification:
"<gl_BaseVertexARB> holds the integer value passed to the <baseVertex>
parameter to the command that resulted in the current shader
invocation. In the case where the command has no <baseVertex>
parameter, the value of <gl_BaseVertexARB> is zero."
I conclude that gl_BaseVertexARB should only include the baseVertex
parameter from glDraw*Elements*, not any internal biases we add for
optimization purposes.
With that in mind, gl_BaseVertexARB only needs prim[i].start or
prim[i].basevertex. We can simply store that, and go back to computing
start_vertex_location and base_vertex_location in brw_emit_prim(), like
we used to. This is much simpler, and should actually fix two bugs.
Fixes missing geometry in Unvanquished.
Cc: "10.4 10.3" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85529
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
(cherry picked from commit c633528cba)
Fixes the piglits which check that gl_VertexID includes the base vertex
offset:
arb_draw_indirect-vertexid elements
gl-3.2-basevertex-vertexid
Note that this leaves out the original G80, for which this will continue
to fail. It could be fixed by passing a driver constbuf value in, but
that's beyond the scope of this change.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit be0311c962)
LAST_LINE_PIXEL has actually been renamed to PIXEL_CENTER_INTEGER in
rnndb; use that method to implement the rasterizer setting, used for
st/nine.
Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 609c3e51f5)
E.g. this could happen on older kernels which don't support the
RADEON_INFO_SI_BACKEND_ENABLED_MASK query yet. The code in
si_write_harvested_raster_configs() doesn't deal with this correctly and
would probably mangle the value badly.
Cc: "10.4 10.3" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
(cherry picked from commit b3057f8097)
The blitter will start at a pixel's natural alignment. For PBOs, if the
provided offset if not aligned, bits will get dropped.
This change adds offset alignment check for src and dst, kicking back if
the requirements are not met.
The change is based on following verbiage from BSPEC:
Color pixel sizes supported are 8, 16, and 32 bits per pixel (bpp).
All pixels are naturally aligned.
Found in the following locations:
page 35 of intel-gfx-prm-osrc-hsw-blitter.pdf
page 29 of ivb_ihd_os_vol1_part4.pdf
page 29 of snb_ihd_os_vol1_part5.pdf
This behavior was observed with Steam Big Picture rendering incorrect
icon colors. The fix has been tested on Ubuntu and SteamOS on Haswell.
Signed-off-by: Cody Northrop <cody@lunarg.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83908
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 83e8bb5b1a)
Nominated-by: Matt Turner <mattst88@gmail.com>
We were assuming, when constructing a new brw_reg struct, that the
negate and abs register modifiers would not be present by default in
the new register.
Now, we force explicitly setting these values when constructing a new
register.
This will avoid problems like forgetting to properly set them when we
are using a previous register to generate this new register, as it was
happening in the dFdx and dFdy generation functions.
Fixes piglit test shaders/glsl-deriv-varyings
Cc: "10.4 10.3" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82991
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 8517e665bc)
glXSwapBuffersMscOML() with target_msc=divisor=remainder=0 gets
translated into target_msc=divisor=0 but remainder=1 by the mesa
api. This is done for server DRI2 where there needs to be a way
to tell the server-side DRI2ScheduleSwap implementation if a call
to glXSwapBuffers() or glXSwapBuffersMscOML(dpy,window,0,0,0) was
done. remainder = 1 was (ab)used as a flag to tell the server to
select proper semantic. The DRI3/Present backend ignored this
signalling, treated any target_msc=0 as glXSwapBuffers() request,
and called xcb_present_pixmap with invalid divisor=0, remainder=1
combo. The present extension responded kindly to this with a
BadValue error and dropped the request, but mesa's DRI3/Present
backend doesn't check for error codes. From there on stuff went
downhill quickly for the calling OpenGL client...
This patch fixes the problem.
v2: Change comments to be more clear, with reference to
relevant spec, as suggested by Eric Anholt.
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 0d7f4c8658)
Restores proper immediate tearing swap behaviour for
OpenGL bufferswap under DRI3/Present.
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
v2: Add Frank Binns signed off by for his original earlier
patch from April 2014, which is identical to this one, and
Chris Wilsons reviewed tag from May 2014 for that patch, ergo
also for this one.
v3: Incorporate comment about triple buffering as suggested
by Axel Davy, and reference to relevant spec provided by
Eric Anholt.
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 455d3036fa)
Prevent calls to glXGetSyncValuesOML() and glXWaitForMscOML()
from overwriting the (ust,msc) values of the last successfull
swapbuffers call (PresentPixmapCompleteNotify event), as
glXWaitForSbcOML() relies on those values corresponding to
the most recent completed swap, not to whatever was last
returned from the server.
Problematic call sequence without this patch would have been, e.g.,
glXSwapBuffers()
... wait ...
swap completes -> PresentPixmapComplete event -> (ust,msc)
updated to reflect swap completion time and count.
... wait for at least 1 video refresh cycle/vblank increment.
glXGetSyncValuesOML()
-> PresentNotifyMsc event overwrites (ust,msc) of swap
completion with (ust,msc) of most recent vblank
glXWaitForSbcOML()
-> Returns sbc of last completed swap but (ust,msc) of last
completed vblank, not of last completed swap.
-> Client is confused.
Do this by tracking a separate set of (ust, msc) for the
dri3_wait_for_msc() call than for the dri3_wait_for_sbc()
call.
This makes the glXWaitForSbcOML() call robust again and restores
consistent behaviour with the DRI2 implementation.
Fixes applications originally written and tested against
DRI2 which also rely on this not regressing under DRI3/Present,
e.g., Neuro-Science software like Psychtoolbox-3.
This patch fixes the problem.
v2: Rename vblank_msc/ust to notify_msc/ust as suggested by
Axel Davy for better clarity.
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
(cherry picked from commit ad8b0e8bf6)
targetSBC == 0 is a special case, which asks the function
to block until all pending OpenGL bufferswap requests have
completed.
Currently the function just falls through for targetSBC == 0,
returning bogus results.
This breaks applications originally written and tested against
DRI2 which also rely on this not regressing under DRI3/Present,
e.g., Neuro-Science software like Psychtoolbox-3.
This patch fixes the problem.
v2: Simplify as suggested by Axel Davy. Add comments proposed
by Eric Anholt.
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 8cab54de16)
llvmpipe disables denorms on purpose (on x86/sse only), because denorms are
generally neither required nor desired for graphic apis (and in case of d3d10,
they are forbidden).
However, this caused some arithmetic tests using denorms to fail on some
systems, because the reference did not generate the same results anymore.
(It did not fail on all systems - behavior of these math functions is sort
of undefined when called with non-standard floating point mode, hence the
result differing depending on implementation and in particular the sse
capabilities.)
So, for the reference, simply flush all (input/output) denorms manually
to zero in this case.
This fixes https://bugs.freedesktop.org/show_bug.cgi?id=67672.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
(cherry picked from commit 8148a06b8f)
Nominated-by: Matt Turner <mattst88@gmail.com>
Back to the original commit (8313f444) adding the workaround, we were
enabling it on gens <= 7, even though gens <= 5 can't do multisampling.
I cannot find documentation that says that Sandybridge needs this
workaround but in practice disabling it causes these piglit tests to
fail:
EXT_framebuffer_multisample/interpolation {2,4} centroid-deriv{,-disabled}
On Ironlake:
total instructions in shared programs: 4358478 -> 4349671 (-0.20%)
instructions in affected programs: 117680 -> 108873 (-7.48%)
A bunch of shaders in TF2, Portal 2, and L4D2 are cut by 25~30%.
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
(cherry picked from commit 1a2de7dce8)
On evergreen there are 4 regs, on r600/700 there is only one.
Don't initialise regs and trash someone elses state.
Not sure this fixes anything, but hey one less stupid.
Reviewed-By: Glenn Kennard <glenn.kennard@gmail.com>
Cc: "10.3 10.4" mesa-stable@lists.freedesktop.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 7f21cf7198)
Nowadays GCC assumes stack pointer is 16-byte aligned even on 32-bits, but that is an assumption OpenGL drivers (or any dynamic library for that matter) can't afford to make as there are many closed- and open- source application binaries out there that only assume 4-byte stack alignment.
V4: fix comment and indentation
V3: move all sse4.1 build flag config to the same location
and add comment as to why we need to do the realign
V2: use $target_cpu rather than $host_cpu
and setup build flags in config rather than makefile
https://bugs.freedesktop.org/show_bug.cgi?id=86788
Signed-off-by: Timothy Arceri <t_arceri@yahoo.com.au>
Reviewed-by: Matt Turner <mattst88@gmail.com>
CC: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f1b5f2b157)
Harvested GPUs have some of their render backends disabled, so
in order to prevent the hardware from trying to render things
with these disabled backends we need to correctly program
the PA_SC_RASTER_CONFIG register.
v2:
- Write RASTER_CONFIG for all SEs.
v3:
- Set GRBM_GFX_INDEX.INSTANCE_BROADCAST_WRITES bit.
- Set GRBM_GFX_INFEX.SH_BROADCAST_WRITES bit when done setting
PA_SC_RASTER_CONFIG.
- Get num_se and num_sh_per_se from kernel.
v4:
- Get correct value for num_se
- Remove loop for setting PA_SC_RASTER_CONFIG
- Only compute raster config when a backend has been disabled.
v5: Michel Dänzer
- Fix computation for chips with multiple SEs
https://bugs.freedesktop.org/show_bug.cgi?id=60879
CC: "10.4 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 67dcbcd92c)
Fixes an infinite loop in swrast where the lowering pass unpacks saturate into
clamp but the opt_algebraic pass tries to do the opposite.
v3 (Ian):
This is a revert of commit cfa8c1cb "ir_to_mesa: lower ir_unop_saturate" on
the ir_to_mesa.cpp portion. prog_execute.c can handle saturates in vertex
shaders, so classic swrast shouldn't need this lowering pass.
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83463
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
(cherry picked from commit 39f7b72428)
This was an oversight in the original patch. When PolygonMode is
used, then front faces, back faces, or both may be rendered as
points and are affected by point sprite state.
Note that SNB/IVB can't actually be fully conformant here, for
a legacy context -- we don't have separate sets of pointsprite
enables for front and back faces. Haswell ignores pointsprite
state correctly in hardware for non-point rasterization, so can
do this correctly, but it doesn't seem worth it.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86764
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit ed56c16820)
The GS has an interesting use for mul. Because the GS can emit multiple
vertices per input vertex, and it also has a unique count at the top of the URB
payload, the GS unit needs to be able to dynamically specify URB write offsets
(relative to the global offset). The documentation in the function has a very
good explanation from Paul on the mechanics.
This fixes around 2000 piglit tests on BSW.
v2:
Reworded commit message (Ben) no mention of CHV (Matt)
Change SHRT_MAX to USHRT_MAX (Ken, and Matt)
Update comment in code to reflect the use of UW (Ben)
Add Gen7+ assertion for the relevant GS code, since it won't work on Gen6- (Ken)
Drop the bogus hunk in emit_control_data_bits() (Ken)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84777 (with many dupes)
Cc: "10.4 10.3 10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit f13870db09)
Nine code to match vertex declaration to vs inputs was limiting
the number of possible combinations.
Some sm3 games have issues with that, because arbitrary (usage/index)
can be used.
This patch does the following changes to fix the problem:
. Change the numbers given to (usage/index) combinations to uint16
. Do not put limits on the indices when it doesn't make sense
. change the conversion rule (usage/index) -> number to fit all combinations
. Instead of having a table usage_map mapping a (usage/index) number to
an input index, usage_map maps input indices to their (usage/index)
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
Tested-by: Yaroslav Andrusyak <pontostroy@gmail.com>
Acked-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
(cherry picked from commit 712a4c5438)
With sm3, you can declare an input/output with an usage and an usage index.
Nine code hardcodes the translation usage/index to a corresponding TGSI code.
The translation was limited to a few usage/index combinations that were corresponding
to most of the needs of games, but some games did not work.
This patch rewrites that Nine code to map all possible usage/index combination
to TGSI code. The index associated to TGSI_SEMANTIC_GENERIC doesn't need to be low
for good performance, as the old code was supposing, and is not particularly bounded
(it's UINT16). Given the index is BYTE, we can map all combinations.
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
Tested-by: Yaroslav Andrusyak <pontostroy@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
(cherry picked from commit 5d6d260833)
Issuing D3DISSUE_END should:
. reset previous queries if possible
. end the query
Previous behaviour wasn't calling end_query for
queries not needing D3DISSUE_BEGIN, nor resetting
previous queries.
This fixes several applications not launching properly.
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
Tested-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
(cherry picked from commit eac0b9b68a)
Conflicts:
src/gallium/state_trackers/nine/query9.c
height=0 is legal for 1D array textures (as depth=0 is legal for
2D arrays). Fixes new piglit ext_texture_array-errors test.
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
(cherry picked from commit 4e6244e80f)
Since 73dd50acf6
glsl: implement switch flow control using a loop
The SB backend was falling over in an assert or crashing.
Tracked this down to the loops having no repeats, but requiring
a working break, initial code just called the loop handler for
all non-if statements, but this caused a regression in
tests/shaders/dead-code-break-interaction.shader_test.
So I had to add further code to detect if all the departure
nodes are empty and avoid generating an empty loop for that case.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86089
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
Reviewed-By: Glenn Kennard <glenn.kennard@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 7b0067d23a)
PIPE_CAP_VIDEO_MEMORY returns the amount of video memory in megabytes,
so need to converted it to bytes.
Fixed Warframe memory detection.
v2: also prepare for cards with more than 4GB memory
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
Tested-by: Yaroslav Andrusyak <pontostroy@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: David Heidelberg <david@ixit.cz>
(cherry picked from commit a99f31bced)
D3DPOOL_SCRATCH is disallowed according to spec.
D3DPOOL_SYSTEMMEM should be allowed but we don't handle it right for now.
v2: Fixes segfault in SetTexture when unsetting the texture
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
Tested-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
(cherry picked from commit 4eea2496bc)
Fixes "Error : CONST[20]: Undeclared source register" when running
dx9_alpha_blending_material. Also artifacts on ilo.
v2: also remove unused MISC_CONST
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
Tested-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
(cherry picked from commit 890f963d64)
This patch moves the data field from Resource9 to Surface9 and cleans
D3DPOOL_SYSTEMMEM handling in Texture9. This fixes HL2 lost coast.
It also removes in Texture9 some code written to support importing
and exporting non D3DPOOL_SYSTEMMEM shared buffers. This code hadn't
the design required to support the feature and wasn't used.
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
Tested-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
(cherry picked from commit 6aeae7442d)
We are using 1 more buffer than we have, although in the future the
driver should just end up using one buffer in total probably, this
is a good first step, it merges the txq cube array and buffer info
constants on r600 and evergreen.
This should in theory fix geom shader tests on r600.
v1.1: fix comments from Glenn.
Reviewed-by: Glenn Kennard <glenn.kennard@gmail.com>
Cc: "10.4 10.3" <mesa-stable@lists.freedesktop.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 07ae69753c)
Squashed with commit
r600g: fix fallout from last patch
I accidentally rebased from the wrong machine and missed some
fixes that were on my r600 box.
doh.
this fixes a bunch of geom shader textureSize tests on rv635
from gpu reset to pass.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86760
Reported-by: wolput@onsneteindhoven.nl
Cc: "10.4 10.3" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit b10ddf962f)
Squashed with commit
r600g: make llvm code compile this time
Actually compiling the code helps make it compile.
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 91a827624c)
It's not exported by the official opengl32.dll neither. Applications are
supposed to get it via wglGetProcAddress(), not GetProcAddress().
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
(cherry picked from commit cb009bdd44)
This fixes several MSVC warnings like:
warning C4273: 'glClearColorx' : inconsistent dll linkage
In fact, we should avoid using `declspec(dllexport)` altogether, and use
exclusively the .DEF instead, which gives more precise control of which
symbols must be exported, but all the public GL/GLES headers practically
force us to pick between `declspec(dllexport)` or
`declspec(dllimport)`.
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
(cherry picked from commit 5fdb6d6839)
Fixes broken rendering in Windows-based QtQuick2 apps run through Wine.
This library sets all texture units' GL_COORD_REPLACE, leaves point
sprite mode enabled, and then draws a triangle fan.
Will need a slightly different fix for Gen4-5, but I don't have my old
machines in a usable state currently.
V2: - Simplify patch -- the real changes are no longer duplicated across
the Gen6 and Gen7 atoms.
- Also don't clobber attr overrides -- which matters on Haswell too,
and fixes the other half of the problem
- Fix newly-introduced warnings
V3: - Use BRW_NEW_GEOMETRY_PROGRAM and brw->geometry_program rather than
core flag and state; keep the state flags in order.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84651
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 0008d0e59e)
Ilia noticed that my lowering pass was converting the constant array
used by textureGatherOffsets' offsets parameter to a uniform. This
broke textureGather for Nouveau, and is generally a horrible plan,
since it violates the GLSL constraint that offsets must be an
immediate constant.
When I wrote this pass, I neglected to consider whole array assignment.
I figured opt_array_splitting would handle constant indexing, so this
pass was really about fixing variable indexing.
textureGatherOffsets is an example of whole array access that we really
don't want to touch. Whole array copies don't appear to benefit from
this either - they're most likely initializers for temporary arrays
which are going to be mutated anyway. Since you're copying, you may
as well copy from immediates, not uniforms.
This patch makes the pass look for ir_dereference_arrays of
ir_constants, rather than looking for any ir_constant directly.
This way, it ignores whole array assignment.
No shader-db changes or Piglit regressions on Haswell. Some Piglit
tests generate different code (fixing textureGatherOffsets on Nouveau).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 60f011af1a)
Uniform names (even for hidden uniforms) are required to be unique; some
parts of the compiler assume they can be looked up by name.
Fixes the piglit test: tests/spec/glsl-1.20/linker/array-initializers-1
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 129178893b)
When converting a uniform array reference to a pull constant load, the
`reladdr` expression itself may have its own `reladdr`, arbitrarily
deeply. This arises from expressions like:
a[b[x]] where a, b are uniform arrays (or lowered const arrays),
and x is not a constant.
Just iterate the lowering to pull constants until we stop seeing these
nested. For most shaders, there will be only one pass through this loop.
Fixes the piglit test:
tests/spec/glsl-1.20/linker/double-indirect-1.shader_test
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit adefccd12a)
This moves all the CUBE section above the gradients section,
so that the gradient emission happens on one block which
is what sb/hardware expect.
v2: avoid changes to bytecode by using spare temps
v2.1: shame gcc, oh the shame. (uninit var warnings)
Cc: "10.4 10.3" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Glenn Kennard <glenn.kennard@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit c88385603a)
The piglit tests were failing, and it appeared to be SB
optimising out things, but Glenn pointed out the gradients
are meant to be clause local, so we should emit the texture
instructions in the same clause. This moves things around
to always copy to a temp and then emit the texture clauses
for H/V.
v2: Glenn pointed out we could get another ALU fetch in
the wrong place, so load the src gpr earlier as well.
Fixes at least:
./bin/tex-miplevel-selection textureGrad 2D
Reviewed-by: Glenn Kennard <glenn.kennard@gmail.com>
Cc: "10.4 10.3" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 38ec184419)
res->bind is not an indicator of how the resource is currently bound.
buffers can be rebound across different binding points without changing
underlying storage.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.4 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit fecae4625c)
For 1D and 2D arrays we don't want the other coordinates being
offset and affecting where we sample. I wrote this patch 6 months
ago but lost it.
Fixes:
./bin/tex-miplevel-selection textureLodOffset 1DArray
./bin/tex-miplevel-selection textureLodOffset 2DArray
./bin/tex-miplevel-selection textureOffset 1DArray
./bin/tex-miplevel-selection textureOffset 1DArrayShadow
./bin/tex-miplevel-selection textureOffset 2DArray
./bin/tex-miplevel-selection textureOffset(bias) 1DArray
./bin/tex-miplevel-selection textureOffset(bias) 2DArray
v2: rewrite to handle more cases and be consistent with code
above.
Reviewed-by: Glenn Kennard <glenn.kennard@gmail.com>
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 1830138cc0)
Not all drivers can set gl_Layer from VS. Add a fallback that passes the
instance id from VS to GS, and then uses the GS to set the layer.
Tested by adding
quad_buffers |= clear_buffers;
clear_buffers = 0;
to the st_Clear logic, and forcing set_vertex_shader_layered in all
cases. No piglit regressions (on piglits with 'clear' in the name).
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: "10.4 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 68db29c434)
Some of the geom shader tests produce an empty vertex shader,
on cayman we'd crash in the finaliser because last_cf was NULL.
cayman doesn't need the NOP workaround, so if the code arrives
here with no last_cf, just emit an END.
fixes crashes in a bunch of piglit geom shader tests.
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Glenn Kennard <glenn.kennard@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 4e520101e6)
The sampler_array_size field was added by "mesa/st: add support for
dynamic sampler offsets". But the field wasn't getting copied in
the get_pixel_transfer_visitor() or get_bitmap_visitor() functions.
The count_resources() function then didn't properly compute the
glsl_to_tgsi_visitor::samplers_used bitmask. Then, we didn't declare
all the sampler registers in st_translate_program(). Finally, we
asserted when we tried to emit a tgsi ureg src register with File =
TGSI_FILE_UNDEFINED.
Add the missing assignments and some new assertions to catch the
invalid register sooner.
Cc: "10.3, 10.4" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
(cherry picked from commit 11abd7b2bc)
Using the asynchronous DMA engine for multi-dimensional operations seems
to cause random GPU lockups for various people. While the root cause for
this might need to be fixed in the kernel, let's disable it for now.
Before re-enabling this, please make sure you can hit all newly enabled
paths in your testing, preferably with both piglit and real world apps,
and get in touch with people on the bug reports below for stability
testing.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85647
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83500
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Grigori Goronzy <greg@chown.ath.cx>
(cherry picked from commit ae4536b4f7)
So when checking/building sse code we have three possibilities:
1 Old compiler, throws an error when using -msse*
2 New compiler, user disables sse* (-mno-sse*)
3 New compiler, user doesn't disable sse
The original code, added code for #1 but not #2. Later on we patched
around the lack of handling #2 by wrapping the code in __SSE4_1__.
Yet it lead to a missing/undefined symbol in case of #1 or #2, which
might cause an issue for #2 when using the i965 driver.
A bit later we "fixed" the undefined symbol by using #1, rather than
updating it to handle #2. With this commit we set things straight :)
To top it all up, conventions state that in case of conflicting
(-enable-foo -disable-foo) options, the latter one takes precedence.
Thus we need to make sure to prepend -msse4.1 to CFLAGS in our test.
v2: Clean the #includes. Suggested by Ilia, Matt & Siavash.
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Siavash Eliasi <siavashserver@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 1a6ae84041)
DRI_PRIME setups have different issues due the lack of dma-buf fences
support in the drivers. For DRI3 DRI_PRIME, a race can appear, making
tearings visible, or worse showing older content than expected. Until
dma-buf fences are well supported (and by all drivers), an alternative
is to send the buffers to the server only when rendering has finished.
Since waiting the rendering has finished in the main thread has a
performance impact, this patch uses an additional thread to offload the
wait and the sending of the buffers to the server.
Acked-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
(cherry picked from commit 7f565845a1)
Implements vblank_mode and throttling, which allows us change default ratio
between framerate and input lag.
Acked-by: Jose Fonseca <jfonseca@vmware.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
(cherry picked from commit 948e6c5228)
Work of Joakim Sindholt (zhasha) and Christoph Bumiller (chrisbmr).
DRI3 port done by Axel Davy (mannerov).
v2: - nine_debug.c: klass extended from 32 chars to 96 (for sure) by glennk
- Nine improvements by Axel Davy (which also fixed some wine tests)
- by Emil Velikov:
- convert to static/shared drivers
- Sort and cleanup the includes
- Use AM_CPPFLAGS for the defines
- Add the linker garbage collector
- Restrict the exported symbols (think llvm)
v3: - small nine fixes
- build system improvements by Emil Velikov
v4: [Emil Velikov]
- Do no link against libudev. No longer needed.
Acked-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: David Heidelberg <david@ixit.cz>
(cherry picked from commit fdd96578ef)
[Emil Velikov: use correct ureg_property* functions]
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
v3: thanks to Brian, improved coding style, also glennk helped spot few
things (unsigned -> int, two constify)
v4: thanks Ilia improved function, dropped u_box_clip_3d
v5: incorporated rest of Gregor proposed changes,clean ups
v6: u_box_clip_2d simplify proposed by Ilia Mirkin
Acked-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
(cherry picked from commit 7d2573b537)
At this moment we use only zero or positive values.
v2: Implement it for also for Solaris, MSVC assembly
and enable for other combinations.
v3: Replace MSVC assembly by assert + warning during compilation
v4: remove inc and dec with return for MSVC assembly
Acked-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: David Heidelberg <david@ixit.cz>
(cherry picked from commit cb49132166)
Implement pipe_loader_sw_probe_wrapped which allows to use the wrapped
software renderer backend when using the pipe loader.
v2: - remove unneeded ifdef
- use GALLIUM_PIPE_LOADER_WINSYS_LIBS
- check for CALLOC_STRUCT
thanks to Emil Velikov
Acked-by: Jose Fonseca <jfonseca@vmware.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
(cherry picked from commit e23d63cffd)
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=85529">Bug 85529</a> - Surfaces not drawn in Unvanquished</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=87619">Bug 87619</a> - Changes to state such as render targets change fragment shader without marking it dirty.</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=87658">Bug 87658</a> - [llvmpipe] SEGV in sse2_has_daz on ancient Pentium4-M</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=87913">Bug 87913</a> - CPU cacheline size of 0 can be returned by CPUID leaf 0x80000006 in some virtual machines</li>
</ul>
<h2>Changes</h2>
<p>Chad Versace (2):</p>
<ul>
<li>i965: Use safer pointer arithmetic in intel_texsubimage_tiled_memcpy()</li>
<li>i965: Use safer pointer arithmetic in gather_oa_results()</li>
</ul>
<p>Dave Airlie (3):</p>
<ul>
<li>Revert "r600g/sb: fix issues cause by GLSL switching to loops for switch"</li>
<li>r600g: fix regression since UCMP change</li>
<li>r600g/sb: implement r600 gpr index workaround. (v3.1)</li>
</ul>
<p>Emil Velikov (2):</p>
<ul>
<li>docs: Add sha256 sums for the 10.4.1 release</li>
<li>Update version to 10.4.2</li>
</ul>
<p>Ilia Mirkin (2):</p>
<ul>
<li>nv50,nvc0: set vertex id base to index_bias</li>
<li>nv50/ir: fix texture offsets in release builds</li>
</ul>
<p>Kenneth Graunke (2):</p>
<ul>
<li>i965: Add missing BRW_NEW_*_PROG_DATA to texture/renderbuffer atoms.</li>
<li>i965: Fix start/base_vertex_location for >1 prims but !BRW_NEW_VERTICES.</li>
</ul>
<p>Leonid Shatz (1):</p>
<ul>
<li>gallium/util: make sure cache line size is not zero</li>
</ul>
<p>Marek Olšák (4):</p>
<ul>
<li>glsl_to_tgsi: fix a bug in copy propagation</li>
<li>vbo: ignore primitive restart if FixedIndex is enabled in DrawArrays</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=88662">Bug 88662</a> - unaligned access to gl_dlist_node</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=88930">Bug 88930</a> - [osmesa] osbuffer->textures should be indexed by attachment type</li>
</ul>
<h2>Changes</h2>
<p>Brian Paul (1):</p>
<ul>
<li>mesa: fix display list 8-byte alignment issue</li>
</ul>
<p>Emil Velikov (2):</p>
<ul>
<li>docs: Add sha256 sums for the 10.4.3 release</li>
<li>Update version to 10.4.4</li>
</ul>
<p>José Fonseca (1):</p>
<ul>
<li>egl: Pass the correct X visual depth to xcb_put_image().</li>
</ul>
<p>Mario Kleiner (1):</p>
<ul>
<li>glx/dri3: Request non-vsynced Present for swapinterval zero. (v3)</li>
</ul>
<p>Matt Turner (1):</p>
<ul>
<li>gallium/util: Don't use __builtin_clrsb in util_last_bit().</li>
</ul>
<p>Niels Ole Salscheider (1):</p>
<ul>
<li>configure: Link against all LLVM targets when building clover</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=88658">Bug 88658</a> - (bisected) Slow video playback on Kabini</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=89069">Bug 89069</a> - Lack of grass in The Talos Principle on radeonsi (native\wine\nine)</li>
</ul>
<h2>Changes</h2>
<p>Carl Worth (1):</p>
<ul>
<li>Revert use of Mesa IR optimizer for ARB_fragment_programs</li>
</ul>
<p>Emil Velikov (3):</p>
<ul>
<li>docs: Add sha256 sums for the 10.4.4 release</li>
<li>get-pick-list.sh: Require explicit "10.4" for nominating stable patches</li>
<li>Update version to 10.4.5</li>
</ul>
<p>Ilia Mirkin (3):</p>
<ul>
<li>nvc0: bail out of 2d blits with non-A8_UNORM alpha formats</li>
<li>st/mesa: treat resource-less xfb buffers as if they weren't there</li>
<li>nvc0: allow holes in xfb target lists</li>
</ul>
<p>Jeremy Huddleston Sequoia (2):</p>
<ul>
<li>darwin: build fix</li>
<li>darwin: build fix</li>
</ul>
<p>Kenneth Graunke (4):</p>
<ul>
<li>i965: Override swizzles for integer luminance formats.</li>
<li>i965: Use a gl_color_union for sampler border color.</li>
<li>i965: Fix integer border color on Haswell.</li>
<li>glsl: Reduce memory consumption of copy propagation passes.</li>
</ul>
<p>Laura Ekstrand (1):</p>
<ul>
<li>main: Fixed _mesa_GetCompressedTexImage_sw to copy slices correctly.</li>
</ul>
<p>Marek Olšák (5):</p>
<ul>
<li>r600g,radeonsi: don't append to streamout buffers that haven't been used yet</li>
<li>radeonsi: fix instanced arrays with non-zero start instance</li>
<li>radeonsi: small fix in SPI state</li>
<li>mesa: fix AtomicBuffer typo in _mesa_DeleteBuffers</li>
<li>radeonsi: fix a crash if a stencil ref state is set before a DSA state</li>
</ul>
<p>Michel Dänzer (2):</p>
<ul>
<li>st/mesa: Don't use PIPE_USAGE_STREAM for GL_PIXEL_UNPACK_BUFFER_ARB</li>
<li>Revert "radeon/llvm: enable unsafe math for graphics shaders"</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=88885">Bug 88885</a> - Transform feedback uses incorrect interleaving if a previous draw did not write gl_Position</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=89180">Bug 89180</a> - [IVB regression] Rendering issues in Mass Effect through VMware Workstation</li>
</ul>
<h2>Changes</h2>
<p>Abdiel Janulgue (2):</p>
<ul>
<li>glsl: Don't optimize min/max into saturate when EmitNoSat is set</li>
<li>st/mesa: For vertex shaders, don't emit saturate when SM 3.0 is unsupported</li>
</ul>
<p>Andreas Boll (1):</p>
<ul>
<li>glx: Fix returned values of GLX_RENDERER_PREFERRED_PROFILE_MESA</li>
</ul>
<p>Brian Paul (2):</p>
<ul>
<li>swrast: fix multiple color buffer writing</li>
<li>st/mesa: fix sampler view reference counting bug in glDraw/CopyPixels</li>
</ul>
<p>Chris Forbes (1):</p>
<ul>
<li>i965/gs: Check newly-generated GS-out VUE map against correct stage</li>
</ul>
<p>Eduardo Lima Mitev (1):</p>
<ul>
<li>mesa: Fix error validating args for TexSubImage3D</li>
</ul>
<p>Emil Velikov (6):</p>
<ul>
<li>docs: Add sha256 sums for the 10.4.5 release</li>
<li>install-lib-links: remove the .install-lib-links file</li>
<h1>Mesa 10.4.7 Release Notes / March 20, 2015</h1>
<p>
Mesa 10.4.7 is a bug fix release which fixes bugs found since the 10.4.6 release.
</p>
<p>
Mesa 10.4.7 implements the OpenGL 3.3 API, but the version reported by
glGetString(GL_VERSION) or glGetIntegerv(GL_MAJOR_VERSION) /
glGetIntegerv(GL_MINOR_VERSION) depends on the particular driver being used.
Some drivers don't support all the features required in OpenGL 3.3. OpenGL
3.3 is <strong>only</strong> available if requested at context creation
because compatibility contexts are not supported.
</p>
<h2>SHA256 checksums</h2>
<pre>
TBD
</pre>
<h2>New features</h2>
<p>None</p>
<h2>Bug fixes</h2>
<p>This list is likely incomplete.</p>
<ul>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=79202">Bug 79202</a> - valgrind errors in glsl-fs-uniform-array-loop-unroll.shader_test; random code generation</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=89156">Bug 89156</a> - r300g: GL_COMPRESSED_RED_RGTC1 / ATI1N support broken</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=89224">Bug 89224</a> - Incorrect rendering of Unigine Valley running in VM on VMware Workstation</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=89530">Bug 89530</a> - FTBFS in loader: missing fstat</li>
</ul>
<h2>Changes</h2>
<p>Andrey Sudnik (1):</p>
<ul>
<li>i965/vec4: Don't lose the saturate modifier in copy propagation.</li>
</ul>
<p>Daniel Stone (1):</p>
<ul>
<li>egl: Take alpha bits into account when selecting GBM formats</li>
</ul>
<p>Emil Velikov (6):</p>
<ul>
<li>docs: Add sha256 sums for the 10.4.6 release</li>
<li>cherry-ignore: add not applicable/rejected commits</li>
<li>mesa: rename format_info.c to format_info.h</li>
<li>loader: include <sys/stat.h> for non-sysfs builds</li>
<li>auxiliary/os: fix the android build - s/drm_munmap/os_munmap/</li>
<li>Update version to 10.4.7</li>
</ul>
<p>Iago Toral Quiroga (1):</p>
<ul>
<li>i965: Fix out-of-bounds accesses into pull_constant_loc array</li>
</ul>
<p>Ilia Mirkin (4):</p>
<ul>
<li>freedreno: move fb state copy after checking for size change</li>
<li>freedreno/ir3: fix array count returned by TXQ</li>
<li>freedreno/ir3: get the # of miplevels from getinfo</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=70410">Bug 70410</a> - egl-static/Makefile: linking fails with llvm >= 3.4</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=72685">Bug 72685</a> - [radeonsi hyperz] Artifacts in Unigine Sanctuary</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=72819">Bug 72819</a> - [855GM] Incorrect drop shadow color on windows and strange white rectangle when showing/hiding GLX-dock...</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=74563">Bug 74563</a> - Surfaceless contexts are not properly released by DRI drivers</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=74863">Bug 74863</a> - [r600g] HyperZ broken on RV770 and CYPRESS (Left 4 Dead 2 trees corruption) bisected!</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=75011">Bug 75011</a> - [hyperz] Performance drop since git-01e6371 (disable hyperz by default) with radeonsi</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=75112">Bug 75112</a> - Meta Bug for HyperZ issues on r600g and radeonsi</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=76252">Bug 76252</a> - Dynamic loading/unloading of opengl32.dll results in a deadlock</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=76861">Bug 76861</a> - mid3 generates slow code for constant arguments</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=77957">Bug 77957</a> - Variably-indexed constant arrays result in terrible shader code</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=78468">Bug 78468</a> - Compiling of shader gets stuck in infinite loop</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=79155">Bug 79155</a> - [Tesseract Game] Global Illumination: Medium Causes Color Distortion</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=79462">Bug 79462</a> - [NVC0/Codegen] Shader compilation falis in spill logic</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=80050">Bug 80050</a> - [855GM] Incorrect drop shadow color under windows in Cinnamon persists with MESA 10.1.</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=80247">Bug 80247</a> - Khronos conformance test ES3-CTS.gtf.GL3Tests.transform_feedback.transform_feedback_vertex_id fails</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=80561">Bug 80561</a> - Incorrect implementation of some VDPAU APIs.</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=82538">Bug 82538</a> - Super Maryo Chronicles fails with st/mesa assertion failure</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=82539">Bug 82539</a> - vmw_screen_dri.lo In file included from vmw_screen_dri.c:41: vmwgfx_drm.h:32:17: error: drm.h: No such file or directory</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=82796">Bug 82796</a> - [IVB/BYT-M/HSW/BDW Bisected]Synmark2_v6.0_OglTerrainFlyInst/OglTerrainPanInst cannot run as image validation failed</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=83148">Bug 83148</a> - Unity invisible under Ubuntu 14.04 and 14.10</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=83355">Bug 83355</a> - FTBFS: src/mesa/program/program_lexer.l:122:64: error: unknown type name 'YYSTYPE'</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=83380">Bug 83380</a> - Linking fails when not writing gl_Position.</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=83418">Bug 83418</a> - EU IV is incorrectly rendered after git1409011930.d571f2</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=84178">Bug 84178</a> - Big glamor regression in Xorg server 1.6.99.1 GIT: x11perf 1.5 Test: PutImage XY 500x500 Square</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=84355">Bug 84355</a> - texture2DProjLod and textureCubeLod are not supported when using GLES.</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=84529">Bug 84529</a> - [IVB bisected] glean fragProg1 CMP test failed</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=84538">Bug 84538</a> - lp_test_format.c:226:4: error: too few arguments to function ‘gallivm_create’</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=84557">Bug 84557</a> - [HSW] "Emit ELSE/ENDIF JIP with type D on Gen 7" causes Atomic Afterlife and GPU hangs</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=84651">Bug 84651</a> - Distorted graphics or black window when running Battle.net app on Intel hardware via wine</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=84662">Bug 84662</a> - Long pauses with Unreal demo Elemental on R9270X since : Always flush the HDP cache before submitting a CS to the GPU</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=84807">Bug 84807</a> - Build issue starting between bf4aecfb2acc8d0dc815105d2f36eccbc97c284b and a3e9582f09249ad27716ba82c7dfcee685b65d51</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=85189">Bug 85189</a> - llvm/invocation.cpp: In function 'void {anonymous}::optimize(llvm::Module*, unsigned int, const std::vector<llvm::Function*>&)': llvm/invocation.cpp:324:18: error: expected type-specifier</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=85267">Bug 85267</a> - vlc crashes with vdpau (Radeon 3850HD) [r600]</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=85377">Bug 85377</a> - lp_test_format failure with llvm-3.6</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=85425">Bug 85425</a> - [bisected] Compiler error in clip control operations in meta</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=85429">Bug 85429</a> - indirect.c:296: multiple definition of `__indirect_glNewList'</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=85454">Bug 85454</a> - Unigine Sanctuary with Wine crashes on Mesa Git</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=85647">Bug 85647</a> - Random radeonsi crashes with mesa 10.3.x</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=85691">Bug 85691</a> - 'glsl: Drop constant 0.0 components from dot products.' broke piglit shaders/glsl-gnome-shell-dim-window and a few others with Gallium</li>
/* No corresponding output found, load defaults into input.
* Don't set any other bits.
* (FLAT_SHADE=1 completely changes behavior) */
tmp=S_028644_OFFSET(0x20);
}
si_pm4_set_reg(pm4,
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
