driCreateContextAttribs() emits an error if bit
__DRI_CTX_FLAG_ROBUST_BUFFER_ACCESS is set for an ES context. But,
EGL_EXT_create_context_robustness and EGL 1.5 both allow creation of
robust ES contexts. One requests a robust ES context by setting the
EGL_CONTEXT_OPENGL_ROBUST_ACCESS *attribute*, which Mesa's EGL layer
translates into the __DRI_CTX_FLAG_ROBUST_BUFFER_ACCESS *bit*.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 7a835b3fd9)
When index - t->temps_size is greater than 4096, allocating space for
temporaries on demand will miserably crash. This can happen when a game
uses a lot of temporaries like the recent released Tomb raider.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 8f2238ccba)
In optimized builds, visit(ir_expression *) experiences inlining with gcc that
leads the function to have a roughly 32KB stack frame. This is a problem given
that the function is called recursively. In non-optimized builds, the stack
frame is much smaller, hence one gets crashes that happen only in optimized
builds.
Arguably there is a compiler bug or at least severe misfeature here. In any
case, the easy thing to do for now seems to be moving the bulk of the
non-recursive code into a separate function. This is sufficient to convince my
version of gcc not to blow up the stack frame of the recursive part. Just to be
sure, add the gcc-specific noinline attribute to prevent this bug from
reoccuring if inliner heuristics change.
v2: put ATTRIBUTE_NOINLINE into macros.h
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95133
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95026
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92850
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@gmail.com>
(cherry picked from commit 98c348d26b)
[Emil Velikov: resolve trivial conflicts]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/mesa/state_tracker/st_glsl_to_tgsi.cpp
The third source must be emitted at offset 49 instead of 17 and the
not modifier is at 52 instead of 20. If you look a bit above in
emitLogicOp() you will see that the dest is emitted at 17 which
confirms that src(2) is obviously wrong.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 3da8528846)
This patch modifies r600_colorformat_endian_swap(), so for 16-bit and for
32-bit buffers, the endianess configuration will be determined not only
by the color/texture format, but also by the do_endian_swap parameter.
The only exception is for array formats, which are always set to not do
swapping, because for them gallium sets an alias based on the machine's
endianess.
v4:
V_0280A0_COLOR_16_16 and V_0280A0_COLOR_16_16_FLOAT should be set to
8IN16 because the bytes inside need to be swapped even for array formats.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 686ad477bd)
Because r600 GPUs can't do swap in their DB unit, we need to disable
endianess swapping for textures that are handled by DB.
There are four format translation functions in r600g driver:
- r600_translate_texformat
- r600_colorformat_endian_swap
- r600_translate_colorformat
- r600_translate_colorswap
This patch adds a new parameters to those functions, called
"do_endian_swap". When running in a big-endian machine, the calling
functions will check whether the texture/color is handled by DB -
"rtex->is_depth && !rtex->is_flushing_texture" - and if so, they will
send FALSE through this parameter. Otherwise, they will send TRUE.
The translation functions, in specific cases, will look at this parameter
and configure the swapping accordingly.
v4:
evergreen_init_color_surface_rat() is only used by compute and don't
handle DB surfaces, so just sent hard-coded FALSE to translation
functions when called by it.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 2242dbe11d)
Squashed with commit
radeonsi: fix build error because of missing param
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 514c5b5f4b)
[Emil Velikov: resolve trivial conflicts]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/gallium/drivers/radeonsi/si_state.c
Some cases (especially these using fract for coord wrapping) did not handle
NaNs (or Infs) correctly - the following code assumed the fract result
could not be outside [0,1], but if the input is a NaN (or +-Inf) the fract
result was NaN - which then could produce out-of-bound offsets.
(Note that the explicit NaN behavior changes for min/max on x86 sse don't
result in actual changes in the generated jit code, but may on other
architectures. Found by looking through all the wrap functions.)
This fixes https://bugs.freedesktop.org/show_bug.cgi?id=94955
No piglit changes.
(v2: fix min/max typo in coord_mirror, add comment)
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
Tested-by: Bruce Cherniak <bruce.cherniak@intel.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
(cherry picked from commit bd07e20d20)
Part of fixing piglit EXT_framebuffer_multisample/sample-coverage inverted
(there is also a bug with RCL tiled blits)
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 79b36168e0)
This was a bug from the MSAA enabling. Tests for surfaces with
nr_samples==1 instead of 0 (generally GL renderbuffers) would incorrectly
fail out.
Fixes the ARB_framebuffer_sRGB piglit tests other than srgb_conformance.
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 1410403e1e)
Screwed up since 0753b135f6.
(Only an issue with different min/mag filters, and then only in some cases,
which is probably why it went unnoticed for quite a while.
The effect should have simply been nearest mip filter instead of linear, iff
min was nearest, mag was linear, and all pixels hit the mignifying path.)
Fixes a bunch of dEQP failures.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 4ff8cbb0d8)
For systems without udev or sysfs that use drm ioctls in the loader
drm authentication must take place earlier or the loader will fail
"MESA-LOADER: failed to get param for i915".
Patch from Mark Kettenis.
Cc: "11.2 11.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
[Emil Velikov: remove gratuitous white-space]
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 9bbf3737f9)
Squashed with commit
egl/x11: resolve "initialization from incompatible pointer type" warning
With earlier commit we've moved a few functions and changing the
argument type from _EGLDisplay * to struct dri2_egl_display *.
The latter is effectively a wrapper around the former, thus
functionality was preserved, although GCC rightfully warned us about the
misuse.
Add a simple wrapper that casts and propagates the correct type.
Fixes: 9bbf3737f9 ("egl/x11: authenticate before doing chipset id
ioctls")
Cc: "11.2 11.1" <mesa-stable@lists.freedesktop.org>
Reported-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit b8e59292e6)
We need to fix up the offset to point at the face of the cube. Fixes
piglit fbo-cubemap, copyteximage CUBE, and glean's fbo test.
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 48fe53bbb9)
This code started out like the T case, iterating over utile offsets, but I
had partially switched it to iterating over pixel offsets. I hadn't
caught this before because it's unusual to do piecemeal uploads to small
textures.
Fixes bad text rendering in QT5 apps, which use a 256x16 glyph cache.
Also fixes 6 piglit tests related to glTexSubImage() and
glGetTexSubImage().
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f6d21bcd6b)
Each of the [de]tiling functions has three mem_copy calls:
1) Left edge to tile boundary
2) Tile boundary to tile boundary in a loop
3) Tile boundary to right edge
Copies 2 and 3 start at a tile edge so the pointer to tiled memory is
guaranteed to be at least 16-byte aligned. Copy 1, on the other hand,
starts at some arbitrary place in the tile so it doesn't have any such
alignment guarantees.
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>
(cherry picked from commit f6f54a29ca)
Commit 4420f189b6 addresses a regression introduced by 83b589301f. The
latter of which is a regression fix, that did not land in 11.1 branch.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Missed out with earlier commit while resolving conflicts.
Fixes: a785cccc70 "nvc0/ir: fix picking of coordinates from tex
instruction for textureGrad"
Reported-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
This fixes piglit tests like
tests/spec/glsl-1.10/execution/variable-indexing/vs-output-array-float-index-wr.shader_test
and related ones.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 3610b1466d)
Currently mesa fails building with the x32 abi as ms_abi is not defined
in such a case.
The patch uses ms_abi only for amd64 targets and stdcall only for i386
targets to be sure that those are defined.
This patch additionally checks for __GNUC__ to guarantee that
__attribute__ is available.
CC: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Christian Schmidbauer <ch.schmidbauer@gmail.com>
Acked-by: Axel Davy <axel.davy@ens.fr>
(cherry picked from commit 2a529a8ac8)
Builds with gallium enabled fail on x86 with linker error:
external/mesa3d/src/mesa/vbo/vbo_exec_array.c:127: error: undefined reference to '_mesa_uint_array_min_max'
The problem is sse_minmax.c is not included in the libmesa_st_mesa
library. Since the SSE4.1 files are needed for both libmesa_st_mesa
and libmesa_dricore, move SSE4.1 files into a separate static library
that can be used by both.
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 2d9e0f24e1)
Back in the dawn of time, we used to do immediate uploads for the vertex
data, and all was well. However Maxwell dropped support for immediate
vertex data, so we started feeding in a VBO (in all cases). But we
forgot to disable some things that apply in such cases, specifically
primitive restart and index bias. The latter was causing WoW and other
Blizzard games trouble as they use a pattern where they draw with a base
vertex (aka index bias), followed by texture uploads (aka blits,
internally).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91526
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Tested-by: Karol Herbst <nouveau@karolherbst.de>
(cherry picked from commit 41100b6b44)
On Fermi, there's an argument in front of the coords that combines array
and indirect handle, while on Kepler the array and the indirect handle
are separate (and in front of the coords). We were previously only
accounting for the array bit of it, if there were an indirect access it
wouldn't be counted in the formula.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f667d15561)
[Emil Velikov: resolve trivial conflicts]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/gallium/drivers/nouveau/codegen/nv50_ir_lowering_nvc0.cpp
If a layer parameter is provided, we want to flip it to position 0 (and
combine it with any indirect params). However if the target is not an
array, there is no layer, so we have to shift all of the arguments down
by one to make room for it.
This fixes situations where there were non-coordinate parameters, such
as bias, lod, depth compare, explicit derivatives. Instead of adding a
new parameter at the front for the indirect reference, we would swap one
of those in its place.
Fixes dEQP-GLES31.functional.shaders.opaque_type_indexing.sampler.uniform.compute.*shadow
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reported-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 7d98bfedd7)
We make sure that that image depth matches the level's depth before
copying it into place. However we should only be minifying the first
level's depth for 3d textures - array textures have the same depth for
all levels.
This fixes tests such as
dEQP-GLES3.functional.texture.specification.texsubimage3d_depth.* and I
suspect account for a number of other odd situations I've run into where
level > 0 of array textures was messed up.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit adb40a7399)
This fix is analogous to commit ff085d014.
This fixes some use-after-free situations in dEQP when an xfb state is
removed, and then a clear is triggered, which only does a partial
validation. It would attempt to read the no-longer-valid buffers,
resulting in crashes.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit d1b85dbffa)
[Emil Velikov: macro names do not need 3D_ ]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/gallium/drivers/nouveau/nv50/nv50_shader_state.c
src/gallium/drivers/nouveau/nv50/nv50_state.c
Patch provides a default for a set pbuffer surface size when
EGL_LARGEST_PBUFFER is used by the client. MIN2 macro is moved
to egldefines so that it can be shared.
Fixes following Piglit test:
egl-create-largest-pbuffer-surface
From EGL 1.5 spec:
"Use EGL_LARGEST_PBUFFER to get the largest available pbuffer
when the allocation of the pbuffer would otherwise fail."
Currently there exists no API to query largest available pixmap size
using xlib or xcb so right now this seems most straightforward way to
ensure that we fulfill above API and also we don't attempt to allocate
'too big' pixmap which might succeed on server side but not work in
practice when driver starts to use it as a texture.
v2: add more explanation about the change (Emil)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit d4714512e4)
The logic was comparing actual ints, not true/false values.
This meant that it was emitting always multiple line segments instead of just
one even if the stipple test had the same result, which looks inefficient, and
the segments also overlapped thus breaking line aa as well.
(In practice, with the no-op default line stipple pattern, for a 10-pixel
long line from 0-9 it was emitting 10 segments, with the individual segments
ranging from 0-1, 0-2, 0-3 and so on.)
This fixes https://bugs.freedesktop.org/show_bug.cgi?id=94193
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
CC: <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 12a4f0bed6)
The filt_args->offset wasn't assigned but was always used later leading
to a crash (as far as I can tell, texel offsets don't actually make much
sense with anisotropic filtering, but because there's no explicit setting
if offsets are enabled there the array is always accessed).
This fixes https://bugs.freedesktop.org/show_bug.cgi?id=94481
Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>
CC: <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 9e9d69979c)
Bug found by the liveness analysis validation pass that will be
introduced in a later commit. The no-op MOV check in
opt_register_coalesce() was removing instructions which makes the
cached liveness analysis calculation inconsistent with the shader IR.
We were failing to set progress to true in that case though, which
means that invalidate_live_intervals() wouldn't necessarily be called
at the end of the function.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 7d7990cf65)
Bug found by the liveness analysis validation pass that will be
introduced in a later commit. fixup_3src_null_dest() was allocating
registers which makes the cached liveness analysis calculation
incomplete, so it must be invalidated.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 93be4158ae)
Bug found by the liveness analysis validation pass that will be
introduced in a later commit. opt_sampler_eot() was allocating
registers and inserting and removing instructions, which makes the
cached liveness analysis calculation inconsistent with the shader IR,
so it must be invalidated.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 6691c03fd3)
The idea is that a single triangle will cover the whole area being
drawn, allowing the blit shader to do its work. However the max fb size
is 16384x16384, which means that the triangle we draw needs to be twice
that in order to cover the whole area fully. Increase the size of the
triangle to 32768x32768.
This fixes a number of dEQP tests that were failing because a blit was
involved which would miss some of the resulting texture.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit a651bc027d)
With this issue 'mpv --hwdec=vdpau --vo=vdpau <stream>' fails
for vdpau decode if the stream height is 4096. Vdpau decode of
height upto 4096 is necessary usecase on amdgpu driver for VI
and newer platforms.
The fix is in driver specific implementation of "Decoder
Query Capabilities" API to return 4096 for VI and newer
platforms. With this fix vdpauinfo reports height support as
4096 and mpv for vdpau decode works fine for 4096 height streams.
Signed-off-by: Tamil velan <Tamil-Velan.Jayakumar@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 353a4f844f)
This fixes a crash in
dEQP-GLES3.functional.transform_feedback.array_element.separate.points.lowp_mat3x2
and likely others. The vertex shader has > 16 input variables (without
explicit locations), which causes us to index outside of the to_assign
array.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f6827e20d1)
This fixes some use-after-free situations in dEQP when an xfb state is
removed, and then a clear is triggered, which only does a partial
validation. It would attempt to read the no-longer-valid buffers,
resulting in crashes.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit ff085d014e)
[Emil Velikov: macro names do not need 3D_ ]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/gallium/drivers/nouveau/nvc0/nvc0_shader_state.c
src/gallium/drivers/nouveau/nvc0/nvc0_state.c
When BaseLevel > 0, we magnify the dimensions to fill out the size of
miplevels [0..BaseLevel). In particular, this was magnifying depth,
thinking that the depth doubles at each level. This is perfectly
reasonable for 3D textures, but dead wrong for array textures.
Changing the depth != 1 condition to a target == GL_TEXTURE_3D check
should make this only happen in the appropriate cases.
Fixes about 32 dEQP tests:
- dEQP-GLES31.functional.texture.gather.*.level_{1,2}
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 4ba7ad6cc1)
If running with a software renderer backend, the timeout may be
insufficient, and we don't want to release busy buffers too early.
In practice, SVGA gpu lockups are extremely rare.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 395c7b8fa1)
From section 6.2 ("State Tables") of the GL 2.1 specification
(the text also appears in the GL 3.0 and ES 3.1 specifications):
"However, state variables for which IsEnabled is listed as the query
command can also be obtained using GetBooleanv, GetIntegerv, GetFloatv,
and GetDoublev."
GL_DEBUG_OUTPUT, GL_DEBUG_OUTPUT_SYNCHRONOUS, and GL_FRAGMENT_SHADER_ATI
were missing from the glGet*() functions. All other IsEnabled() pnames
look to be present, as far as I can tell.
Fixes 8 dEQP-GLES31.functional.debug.state_query subtests:
debug_output[_synchronous]_get{boolean,float,integer,integer64}.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit aa37cbdff7)
dEQP-GLES31.functional.debug.state_query.debug_group_stack_depth_*
tries to call glGet on GL_DEBUG_GROUP_STACK_DEPTH right away, before
doing any other debug setup. This should return 1.
However, because ctx->Debug wasn't allocated, we bailed and returned 0.
This patch removes the open-coded locking and switches the two glGet
functions to use _mesa_lock_debug_state(), which takes care of
allocating and initializing that state on the first time. It also
conveniently takes care of unlocking on failure for us, so we don't
need to handle that in every caller.
Fixes dEQP-GLES31.functional.debug.state_query.debug_group_stack_depth_
{getboolean,getfloat,getinteger,getinteger64}.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit b4b50b074b)
[Emil Velikov: the path has changed s|debug_output|errors|]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/mesa/main/debug_output.c
There is an old if statement (dated to 2011) that prevented doing
endian swap for colorformat, in case the buffer is marked as
PIPE_USAGE_STAGING.
This is now wrong because st_ReadPixels() reads into a destination
texture that is marked with PIPE_USAGE_STAGING. Therefore, even if
the texture is rendered correctly to the monitor, when reading it
back we get unswapped/wrong values.
This patch makes the check_rgba() function in gl-1.0-readpixsanity
piglit test pass in big-endian.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 914d4967d7)
There is an old if statement (dated to 2011) that prevented doing
endian swap for colorformat, in case the buffer is marked
as PIPE_USAGE_STAGING.
This is now wrong because st_ReadPixels() reads into a destination
texture that is marked with PIPE_USAGE_STAGING. Therefore, even if
the texture is rendered correctly to the monitor, when reading it
back we get unswapped/wrong values.
This patch makes the check_rgba() function in gl-1.0-readpixsanity
piglit test pass in big-endian.
v2: removed duplicate call to r600_colorformat_endian_swap() inside
evergreen_init_color_surface_rat()
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit ef5183faea)
When reusing a depth attachment as a stencil, we need to propogate
the layered bit, otherwise we fail to complete the framebuffer.
discovered running ./bin/fbo-depth-array depth-layered-clear
on virgl on haswell.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 35859d5bbb)
Add the virtio-gpu PCI ID for virtio 1.0 (according to the
specification, "the PCI Device ID is calculated by adding 0x1040 to the
Virtio Device ID")
Support for virtio 1.0 was added in qemu 2.4 (same time virtio-gpu
landed).
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit f1d12e7392)
This is a very rudimentary script that checks if any of the applied
cherry-picks have been referenced (fixed?) by another patch. With the
latter either missing the stable tag or hasn't yet been picked.
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit c212a70cd9)
Namely - opencl, osmesa (only the gallium flavour as it conflicts with
the classic one), surfaceless egl platform and a couple gallium drivers
(virgl and vc4).
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 325bc6fb4a)
Namely:
b662d5282f mesa: Add clean-local rule to remove .lib links.
5c1aac17ad install-lib-links: don't depend on .libs directory
fece147be5 install-lib-links: remove the .install-lib-links file
With these in place, make distcheck now passes and a race condition has
been avoided.
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 0b6157e971)
In builds with clang, there are several errors related to the enum
alu_op_flags like this:
src/gallium/drivers/r600/sb/sb_expr.cpp:887:8:
error: case value evaluates to -1610612736, which cannot be narrowed to
type 'unsigned int' [-Wc++11-narrowing]
These are due to the MSB being set in the enum. Fix these errors by
making the enum values unsigned as needed. The flags field that stores
this enum also needs to be unsigned.
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
Cc: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit 51b22bd468)
Fix compiles with clang that have this C++11 error:
src/gallium/drivers/radeon/r600_pipe_common.h:662:34:
error: invalid suffix on literal; C++11 requires a space between literal
and identifier [-Wreserved-user-defined-literal]
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
Cc: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit 92dd38df5a)
MESA_DRI_MODULE_PATH is only getting set for classic DRI drivers and may or
may not be set correctly for gallium_dri.so depending on the makefile
include ordering. For Android 6 and earlier it is fine, but with build
system changes in AOSP master, it is not.
Move the path variables to a single place at the top level and introduce
MESA_DRI_MODULE_REL_PATH for Android 5 and later which require relative
paths. With this, there is a single variable to change.
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 8949edf018)
[Emil Velikov: resolve trivial conflicts]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/egl/Android.mk
clang complains about date/time macros:
src/mesa/main/context.c:403:25: error: expansion of date or time macro is not reproducible [-Werror,-Wdate-time]
Disable this warning.
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 6dae9176d6)
[Emil Velikov: resolve trivial conflict]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
Android.common.mk
The makefile was implicitly picking up YACC_HEADER_SUFFIX from the Android
build system, but this variable is now gone. Add it locally to fix the
build with AOSP master.
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit a2f16db19b)
[Emil Velikov: the path differs s|src/compiler|src| ]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/compiler/glsl/Android.gen.mk
With the Android build system changes to ninja/kati, the use of
.SECONDEXPANSION is no longer supported. Fix this by avoiding rule specific
variables and using $(transform-generated-source).
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 794221fbb7)
This function is currently broken for BE. I assume it's because of
util_pack_color(). Until I fix this path, I prefer to disable it so users
would be able to see correct colors on their desktop and applications.
Together with the two following patches:
- gallium/r600: Don't let h/w do endian swap for colorformat
- gallium/radeon: remove separate BE path in r600_translate_colorswap
it fixes BZ#72877 and BZ#92039
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit a640ad15e1)
Since the rework on gallium pipe formats, there is no more need to do
endian swap of the colorformat in the h/w, because the conversion between
mesa format and gallium (pipe) format takes endianess into account (see
the big #if in p_format.h).
v2: return ENDIAN_NONE only for four 8-bits components
(V_0280A0_COLOR_8_8_8_8)
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit e3dfc0e095)
After further testing, it appears there is no need for
separate BE path in r600_translate_colorswap()
The only fix remaining is the change of the last if statement, in the 4
channels case. Originally, it contained an invalid swizzle configuration
that never got hit, in LE or BE. So the fix is relevant for both systems.
This patch adds an additional 120 available visuals for LE and BE,
as seen in glxinfo
v2:
Tested for regressions by running piglit gpu.py with CAICOS (r600g) on
x86-64 machine. No regressions found.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 9559071ed6)
It appears that it actually needs to be aligned to the datum size, so it
was 1 when testing with R8, but it can be as high as 16 with RGBA32.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit aa3b85fd18)
[Emil Velikov: squash trivial conflicts]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/gallium/drivers/nouveau/nv50/nv50_screen.c
Since commit d1314de293 we ignore
damage passed to SwapBuffersWithDamage.
Wayland 1.10 now has functionality that allows us to properly
process those damage rectangles, and a way to query if it's
available.
Now we can use wl_surface.damage_buffer and interpret the incoming
damage as being in buffer co-ordinates.
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
(cherry picked from commit d085a5dff5)
It's not correct to CSE these multiplies
mul.sat dst1, -a, b
mul.sat dst2, a, b
by emitting a negated MOV from dst1 to dst2:
mul.sat dst1, -a, b
mov dst2, -dst1
Take 2.0*2.0 for example. The first multiply would produce 0.0 and the
second would produce 1.0.
Fixes bad generated code in 18 to 22 shaders:
instructions in affected programs: 432 -> 464 (7.41%)
helped: 4
HURT: 18
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 1567da1e28)
Because I changed the swizzle check, I also need to adapt the return
values for each check.
It's basically almost the same as before, we just cross between STD and
STD_REV, and cross between ALT and ALT_REV
This fixes the rgba test in gl-1.0-readpixsanity (piglit) and also
fixes tri-flat (mesa demos).
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 439b5b008f)
Two things were broken here:
- The depth/stencil surface dimensions were broken for MSAA.
- Sample count was programmed incorrectly.
Result was the depth resolve didn't work correctly on MSAA surfaces, and
so sampling the surface later produced garbage.
Fixes the new piglit test arb_texture_multisample-sample-depth, and
various artifacts in 'tesseract' with msaa=4 glineardepth=0.
Fixes freedesktop bug #76396.
Not observed any piglit regressions on Haswell.
v2: Just set brw_hiz_op_params::dst.num_samples rather than adding a
helper function (Ken).
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
v3: moved the alignment needed for hiz+msaa to brw_blorp.cpp, as
suggested by Chad Versace (Alejandro Piñeiro on behalf of Chris
Forbes)
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com>
Tested-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
(cherry picked from commit 43d23e879c)
Nominated-by: Ben Widawsky <benjamin.widawsky@intel.com> (over IRC)
The EXT spec has been updated to:
- logically combine the es2_profile and es_profile exts
- allow any legal version to be requested
dEQP tests request a specific ES version when using GLX, so this allows
dEQP upstream to run against GLX with the appropriate X server patch
(which had similar disabling logic).
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Matt Turner <mattst88@gmail.com> (v1)
Reviewed-by: Adam Jackson <ajax@redhat.com> (v3)
v1 -> v2:
- distinguish between DRI_API_GLES{,2,3}
- add GLX_EXT_create_context_es_profile client-side support
v2 -> v3:
- fix error in computing mask
(cherry picked from commit 5ac7f0433b)
Nominated-by: Emil Velikov <emil.velikov@collabora.com>
This patch fixes a bug when building a pack instruction.
For POWER (altivec), in case the destination is signed and the
src width is 32, we need to use vpkswss. The original code used vpkuwus,
which emits an unsigned result.
This fixes the following piglit tests on ppc64le:
- spec@arb_color_buffer_float@gl_rgba8-drawpixels
- shaders@glsl-fs-fogscale
I've also corrected some coding style issues in the function.
v2: Returned else statements to vmware style
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
(cherry picked from commit 679a654a77)
The current code in r600_translate_colorswap uses the swizzle information
to determine which colorswap to use.
This works for BE & LE when the nr_channels is <4, but when nr_channels==4
(e.g. PIPE_FORMAT_A8R8G8B8_UNORM), this method can not be used for both BE
and LE, because the swizzle info is the same for both of them.
As a result, r600g doesn't support 24bit color formats, only 16bit, which
forces the user to choose 16bit color in X server.
This patch fixes this bug by separating the checks for LE and BE and
adapting the swizzle conditions in the BE part of the checks.
Tested on an Evergreen GPU (Cedar GL FirePro 2270) running inside POWER7
Big-Endian Machine.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
CC: "11.2" "11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 4b7e219e61)
A nomination unadorned with a specific version is now interpreted as
being aimed at the 11.1 branch, which was recently opened.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
A return value of '-1' means that there was error during swap with a
window drawable, in this case we set error as EGL_BAD_NATIVE_WINDOW.
v2: coding style cleanup, better commit message
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit e6f1a44d14)
Null-check on "*value" is currently done in _eglGetSyncAttrib, which is
after eglGetSyncAttribKHR dereferences it.
Move the check a layer up (in the beginning of eglGetSyncAttribKHR) to
avoid segfaults.
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
[Emil Velikov: tweak commit message, add stable tag]
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit d1e1563bb6)
Even though it's a no-op, it's important to keep track of the type so
that we can pick the properly-signed op later on.
This fixes dEQP-GLES3.functional.shaders.precision.uint.highp_div_fragment,
which ended up using IDIV instead of UDIV.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 49c67926c7)
When there's a predicate, it just goes onto the sources list. If the
quadop only has a single regular source, we will end up thinking that
the predicate is the second source. Check explicitly for the predSrc so
that we don't accidentally emit the wrong thing.
This fixes a bunch of dEQP-GLES3.functional.shaders.derivate.* tests.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit ca23c8081f)
Fixes several of the
"dEQP-GLES31.functional.image_load_store*load_store*single_layer" dEQP
tests that use image formats we implement using untyped surface
messages.
Cc: mesa-stable@lists.freedesktop.org
Tested-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 9e30d66b7c)
This fixes two issues. First, we had a use-after-free in the case where
the instruction got deleted and we tried to return mov->dest.write_mask.
Second, in the case where we are doing a self-mov of a register, we delete
those channels that are moved to themselves from the write-mask. This
means that those channels aren't reported as being handled even though they
are. We now stash off the write-mask before remove unneeded channels so
that they still get reported as handled.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94073
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 70dff4a55e)
This fixes an assertion failure in [at least] one of the Unreal Engine Linux
demo/games that uses DXT1 compression. Specifically, the "Vehicle Game".
At some point, the game ends up trying to blit mip level whose size is 2x2,
which is smaller than a DXT1 block. As a result, the assertion in the blit path
is triggered. It should be safe to simply make sure we align the width and
height, which is sadly an example of compression being less efficient.
NOTE: The demo seems to work fine without the assert, and therefore release
builds of mesa wouldn't stumble over this. Perhaps there is some unnoticeable
corruption, but I had trouble spotting it.
Thanks to Jason for looking at my backtrace and figuring out what was going on.
v2: Use NPOT alignment to make sure ASTC is handled properly (Ilia)
Remove comment about how this doesn't fix other bugs, because it does.
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93358
Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com>
Tested-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
(cherry picked from commit 088280e022)
The fast path for Intel's ReadPixels() unintentionally omits clipping
the specified area to a valid one. Rather than clip in various
corner-cases, perform this operation in the API validation stage.
The bug in intel_readpixels_tiled_memcpy() showed itself when the winsys
ReadBuffer's height was smaller than the one specified by ReadPixels().
yoffset became negative, which was an invalid input for tiled_to_linear().
v2: Move clipping to validation stage (Jason)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92193
Reported-by: Marta Löfstedt <marta.lofstedt@intel.com>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 605832736a)
The builtin data can get released with a glReleaseShaderCompiler call.
We're careful everywhere to clone everything that comes out of builtins
except here, where we accidentally return the signature belonging to the
builtin version, rather than the locally-cloned one.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Tested-by: Rob Herring <robh@kernel.org>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 88519c6087)
The builtin function shader is part of the builtin state, released
when glReleaseShaderCompiler is called. We must ensure that the
builtins have been (re)initialized before attempting to link with the
builtin shader.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Tested-by: Rob Herring <robh@kernel.org>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit ac57577e29)
The vec4 backend, at the end, does this:
if (inst->is_3src()) {
for (int i = 0; i < 3; i++) {
if (inst->src[i].vstride == BRW_VERTICAL_STRIDE_0)
assert(brw_is_single_value_swizzle(inst->src[i].swizzle));
So make sure that we use the same conditions when trying to
copy-propagate. UNIFORMs will be converted to vstride 0 in
convert_to_hw_regs, but so will ATTRs when interleaved (as will happen
in a GS with multiple attributes). Since the vstride is not set at
copy-prop time, infer it by inspecting dispatch_mode and reject ATTRs if
they have non-scalar swizzles and are interleaved.
Fixes assertion errors in dolphin-generated geometry shaders (or
misrendering on opt builds) on Sandybridge or on IVB/HSW with
INTEL_DEBUG=nodualobj.
Co-authored-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93418
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 9f2e22bf34)
GLsync objects had a race condition when used from multiple threads
(which is the main point of the extension, really); it could be
validated as a sync object at the beginning of the function, and then
deleted by another thread before use, causing crashes. Fix this by
changing all casts from GLsync to struct gl_sync_object to a new
function _mesa_get_and_ref_sync() that validates and increases
the refcount.
In a similar vein, validation itself uses _mesa_set_search(), which
requires synchronization -- it was called without a mutex held, causing
spurious error returns and other issues. Since _mesa_get_and_ref_sync()
now takes the shared context mutex, this problem is also resolved.
Fixes bug #92757, found while developing Nageru, my live video mixer
(due for release at FOSDEM 2016).
v2: Marek: silence warnings, fix declaration after code
Signed-off-by: Steinar H. Gunderson <sesse@google.com>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit feb53912f8)
Fixup to commit 03b3eb90d - the number of buffers could be larger than
the number of elements, in which case we'd pass a negative argument to
PUSH_SPACE, which would be bad. While we're at it, merge it with the
other PUSH_SPACE at the top of the function.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 2065e380b2)
nvc0_vbo has explicit push space checking enabled, so we must run
PUSH_SPACE by hand. A few spots missed that.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 03b3eb90d7)
[Emil Velikov: resolve trivial conflicts]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/gallium/drivers/nouveau/nvc0/nvc0_vbo.c
The spill logic will insert convert ops when moving between files. It
seems like the emission logic wasn't quite ready for these converts.
Tested on fermi, and visually looked at nvdisasm output for maxwell.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 1a0fde1f52)
When a fragment shader is used that has no outputs but does conditional
discard (KILL_IF), all fragments are killed without this patch.
By comparing various register settings, my conclusion is that the exec mask
is either not properly forwarded to the DB by NULL exports or ends up being
unused, at least when there is _only_ a NULL export (the ISA documentation
claims that NULL exports can be used to override a previously exported exec
mask).
Of the various approaches I have tried to work around the problem, this one
seems to be the least invasive one.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93761
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We need to tell the address generation functions about the dimensionality of
the texture to correctly implement the part of Section 3.8.1 (Texture Image
Specification) of the OpenGL 2.1 specification which says:
"For the purposes of decoding the texture image, TexImage2D is
equivalent to calling TexImage3D with corresponding arguments
and depth of 1, except that
...
* UNPACK SKIP IMAGES is ignored."
Fixes a low impact bug that was found by chance while browsing the spec and
extending piglit tests.
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
(cherry picked from commit 4a448a63ad)
The scaling list should be filled out with zig zag scan
v2: integrate zig zag scan for list 4x4 to vl(Christian)
v3: move list determination out from the loop(Ilia)
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
(cherry picked from commit 6ad2e55a14)
We use this logic to detect live ranges and then do plain renaming
across the whole codebase. As such, to prevent WaW hazards, we have to
treat a write as if it were also a read.
For example, the following sequence was observed before this patch:
13: UIF TEMP[6].xxxx :0
14: ADD TEMP[6].x, CONST[6].xxxx, -IN[3].yyyy
15: RCP TEMP[7].x, TEMP[3].xxxx
16: MUL TEMP[3].x, TEMP[6].xxxx, TEMP[7].xxxx
17: ADD TEMP[6].x, CONST[7].xxxx, -IN[3].yyyy
18: RCP TEMP[7].x, TEMP[3].xxxx
19: MUL TEMP[4].x, TEMP[6].xxxx, TEMP[7].xxxx
While after this patch it becomes:
13: UIF TEMP[7].xxxx :0
14: ADD TEMP[7].x, CONST[6].xxxx, -IN[3].yyyy
15: RCP TEMP[8].x, TEMP[3].xxxx
16: MUL TEMP[4].x, TEMP[7].xxxx, TEMP[8].xxxx
17: ADD TEMP[7].x, CONST[7].xxxx, -IN[3].yyyy
18: RCP TEMP[8].x, TEMP[3].xxxx
19: MUL TEMP[5].x, TEMP[7].xxxx, TEMP[8].xxxx
Most importantly note that in the first example, the second RCP is done
on the result of the MUL while in the second, the second RCP should have
the same value as the first. Looking at the GLSL source, it is apparent
that both of the RCP's should have had the same source.
Looking at what's going on, the GLSL looks something like
float tmin_8;
float tmin_10;
tmin_10 = tmin_8;
... lots of code ...
tmin_8 = tmpvar_17;
... more code that never looks at tmin_8 ...
And so we end up with a last_read somewhere at the beginning, and a
first_write somewhere at the bottom. For some reason DCE doesn't remove
it, but even if that were fixed, DCE doesn't handle 100% of cases, esp
including loops.
With the last_read somewhere high up, we overwrite the previously
correct (and large) last_read with a low one, and then proceed to decide
to merge all kinds of junk onto this temp. Even if that weren't the
case, and there were just some writes after the last read, then we might
still overwrite a merged value with one of those.
As a result, we should treat a write as a last_read for the purpose of
determining the live range.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 047b917718)
If an instruction has multiple defs, we have to do a lot more checks to
make sure that we can move it forward. Among other things, various code
likes to do
a, b = tex()
if () c = a
else c = b
which means that a single phi node will have results pointing at the
same instruction. We obviously can't propagate the tex in this case, but
properly accounting for this situation is tricky. Just don't try for
instructions with multiple defs.
This fixes about 20 shaders in shader-db, including the dolphin efb2ram
shader.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 3ca941d60e)
It appears that the nvidia render engine is quite picky when it comes to
linear surfaces. It doesn't like non-256-byte aligned offsets, and
apparently doesn't even do non-256-byte strides.
This makes arb_clear_buffer_object-unaligned pass on both nv50 and nvc0.
As a side-effect this also allows RGB32 clears to work via GPU data
upload instead of synchronizing the buffer to the CPU (nvc0 only).
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> # tested on GF108, GT215
Tested-by: Nick Sarnie <commendsarnex@gmail.com> # GK208
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 3ca2001b53)
When using the "shared" vertex array configuration strategy, we bind
each of the buffers as a separate array. However there can be holes in
such vertex buffer lists, so just emit a disable for those.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 438d421f8b)
Just make sure that after we've submitted, we get to at least 5
(global) submits ago before we go on to do more. Prevents up to
seconds of lag with window movement in X with xcompmgr -c. There may
be useful tuning to do in the future, but for now this gets us
usability.
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 3fba517bdd)
On an error return, the returned seqno will probably be unset, so we'd
lose track of what we've submitted so far for waiting on in the
future.
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 2a449ce7c9)
When RA fails, and we spill, we have to clean everything up before doing
RA again. We were forgetting to reset the hi/lo linked lists - at
least the hi list is guaranteed to still have pointers to now-deleted
RIG nodes.
Signed-off-by: Karol Herbst <nouveau@karolherbst.de>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 19ae5de981)
When setting the conservative thread counts, I halved everything. That isn't
correct for the wm, which has nothing to do with actual thread counts. I suck.
BXT only has 1 slice, and there is some ambiguity about subslices, so just
reserve the max possible for now. It looks like this might fix:
piglit.spec.glsl-1_50.execution.variable-indexing.gs-output-array-vec4-index-wr.bxtm64.
I kind of question why that is, but it is what Jenkins says.
Mark is current running some of the other blacklisted tests on this patch. (it
effects anything requiring scratch space).
Cc: mesa-stable <mesa-stable@lists.freedesktop.org>
Cc: Neil Roberts <neil@linux.intel.com>
Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Mark Janes <mark.a.janes@intel.com>
(cherry picked from commit a443b5b732)
_mesa_texture_parameteriv is used because (the more obvious)
_mesa_texture_parameteri just stuffs the parameter in an array and calls
_mesa_texture_parameteriv. This just cuts out the middleman.
As a side bonus we no longer need check that ARB_stencil_texturing is
supported. The test doesn't allow non-supporting implementations to
avoid any work, and it's redundant with the value-changed test.
Fix bug #93717 because the state restore commands at the bottom of
_mesa_meta_GenerateMipmap no longer depend on the bound state.
Fixes piglit arb_direct_state_access-generatetexturemipmap with the
changes recently sent to the piglit mailing list. See the bugzilla
entry for more info.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93717
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
(cherry picked from commit 2542871387)
Commit c246828c added the code to save and restore the stencil
texturing mode. The restore, however, was erroneously inside the
'target != GL_TEXTURE_RECTANGLE' block.
Fixes piglit test 'arb_stencil_texturing-blit_corrupts_state
GL_TEXTURE_RECTANGLE'.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
(cherry picked from commit 18b0ba340b)
Specifically, when the API switches from using a GS to not using a GS and then
back to using the same GS again, we do not have to re-send all the GS state,
but we do have to send VGT_GS_MODE. So make VGT_GS_MODE consistently be a part
of the VS state.
This fixes a rendering bug in Dolphin, but surely other applications are
affected as well.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93648
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 004fcd4230)
Normally there's a producer and consumer, and the producer var gets
picked. In both the vertex->gs and tes->gs cases, that's the un-arrayed
version.
In the SSO case, however, there is no producer. So we picked the arrayed
GS variable, and as a result, used more slots than we should. More
critically, these slots would also no longer line up with the producer's
calculation. To fix this, we need to fix up the type of the variable
based on stage no matter what.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93650
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit dac2964f3e)
This will be used in the following patch for calculating array sizes correctly
when reserving explicit varying locations.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
(cherry picked from commit 5907a02ab6)
By using whole static libraries the android buildsystem provides
whole-archive (alike) solution. This means that we don't need to worry
about the order of the static libraries and any reverse, recursive or
circular dependencies that they have between one another.
Without this the linker will discard any unused hunks of one library
and we'll end up with unresolved symbols as those are required by
another static library. This issue has become more prominent with the
introduction of pipe-loader.
Whole static libraries has been used in i915/i965 for a very long
time, so we might do the same.
v2:
- Better commit message (Ilia)
- Keep external dependencies as [normal] static libs (Mauro)
Cc: mesa-stable@lists.freedesktop.org
Cc: Mauro Rossi <issor.oruam@gmail.com>
Reported-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit f29a772a7e)
The buffers are referenced from r600_update_driver_const_buffers()
-> r600_set_constant_buffer() -> u_upload_data(), but nothing
ever releases the reference. Similar case with driver_consts.
Found using valgrind.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
[Emil Velikov: resolve trivial conflicts]
(cherry picked from commit 0153ff8379)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Apparently, nobody has combined stippling with a fragment shader
containing immediates in almost five years...
Fixes a bug in Kodi with radeonsi reported by Christian König.
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Tested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit e6281a2850)
One of the oglconform tests was crashing here, and it was
due to not cloning the actual parameters before creating the
new call. This makes a call clone function that does the right
things to make sure we clone all the needed info, and points
the callee at it. (It differs from ->clone due to this).
this may fix https://bugs.freedesktop.org/show_bug.cgi?id=93722, I had this
patch in my cts fixes tree, but hadn't had time to make sure I liked it.
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
(cherry picked from commit 119bef9543)
From Section 7.9 (SUBROUTINE UNIFORM VARIABLES) of the OpenGL
4.5 Core spec:
"The command
void UniformSubroutinesuiv(enum shadertype, sizei count,
const uint *indices);
will load all active subroutine uniforms for shader stage
shadertype with subroutine indices from indices, storing
indices[i] into the uniform at location i. The indices for
any locations between zero and the value of
ACTIVE_SUBROUTINE_UNIFORM_LOCATIONS minus one which are not
used will be ignored."
V2: simplify NULL check suggested by Jason.
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: "11.0 11.1" mesa-stable@lists.freedesktop.orghttps://bugs.freedesktop.org/show_bug.cgi?id=93731
(cherry picked from commit 86677f1016)
The ARB has decided that implicit conversions should be performed for
bitwise operators in future language revisions. Implementations of
current language revisions may or may not perform them.
This patch makes Mesa apply implicti conversions even on current
language versions. Applications appear to expect this behavior,
and there's really no downside to doing so.
Fixes shader compilation in Shadow of Mordor.
Bugzilla: https://www.khronos.org/bugzilla/show_bug.cgi?id=1405
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit d54a70aa18)
In the vertex and fragment stages, the hardware is nice to us and leaves
g0.2 zerod out for us so we can use it for headers. However, in compute,
geometry, and tessellation stages, the hardware is not so nice. In
particular, for compute shaders on BDW, the hardware places some debug bits
in 23:15. As it happens, bit 15 is interpreted by the sampler as the alpha
channel mask. This means that if you use a texturing instruction with a
header in a compute shader, you may randomly get the alpha channel
disabled. Since channel masks affect the return length of the sampler
message, this can lead the GPU to expect a different mlen to the one you
specified in the shader and this, in turn, hangs your GPU.
Cc: "11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
(cherry picked from commit 61b0cfd84e)
Currently, opt_vectorize() tries to combine:
result.x = bitfieldInsert(src0.x, src1.x, src2.x, src3.x);
result.y = bitfieldInsert(src0.y, src1.y, src2.y, src3.y);
result.z = bitfieldInsert(src0.z, src1.z, src2.z, src3.z);
result.w = bitfieldInsert(src0.w, src1.w, src2.w, src3.w);
into a single ir_quadop_bitfield_insert opcode, which operates on
ivec4s. However, GLSL IR's opcodes currently require the bits and
offset parameters to be scalar integers. So, this breaks.
We want to be able to vectorize this eventually, but for now, just
chicken out and make opt_vectorize() bail by marking all the bitfield
insert/extract related opcodes as horizontal. This is a relatively
uncommon case today, so we'll do the simple fix for stable branches,
and fix it properly on master.
Fixes assertion failures when compiling Shadow of Mordor vertex shaders
on i965 in vec4 mode (where OptimizeForAOS enables opt_vectorize()).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
[Emil Velikov: resolve trivial conflicts]
(cherry picked from commit 5e3edd4b28)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/glsl/ir.h
We were checking the dirty->st flags but not the dirty->mesa flags.
When we took the early return, we didn't clear the dirty->mesa flags
so the next time we called st_validate_state() we'd often flush the
glBitmap cache. And since st_validate_state() is called from
st_Bitmap(), it meant we flushed the bitmap cache for every glBitmap()
call.
This change seems to recover most of the performance loss observed
with the ipers demo on llvmpipe since commit commit 36c93a6fae.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: José Fonseca <jfonseca@vmware.com>
(cherry picked from commit c28d72a347)
The nir_opt_algebraic rule
(('fadd', ('flog2', a), ('fneg', ('flog2', b))), ('flog2', ('fdiv', a, b))),
can produce new fdiv operations, which need to be lowered on i965,
as we don't actually implement fdiv. (Normally, we handle this in
GLSL IR's lower_instructions pass, but in the above case we introduce
an fdiv after that point. So, make NIR do it for us.)
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 7295f4fcc2)
Spotted by luck. The GLSL uniform storage is only associated once
in LinkShader and can't be reallocated afterwards, because that would
break the association.
v2: don't remove st_upload_constants calls, clarify why they're needed
Cc: 11.0 11.1 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 36c93a6fae)
First off, we can't flush in the middle of a command. Secondly
requesting the extra push space might cause a flush to happen. If that
flush happens, we'd have to do the PUSH_REFN again. So instead do
PUSH_REFN after the push space request. This helps avoid rare crashes
with supertuxkart in libdrm due to assertion failures.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit c1d14c6817)
[Emil Velikov: resolve trivial conflict]
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Conflicts:
src/gallium/drivers/nouveau/nvc0/nvc0_vbo.c
varying_matches::record tries to compute the number of components in
each varying, which varying_matches::assign_locations uses to assign
locations. With varying packing, it uses glsl_type::component_slots()
to come up with a reasonable value.
Without varying packing, it fell back to an open-coded computation
that didn't bother to handle structs at all. I believe we can simply
use 4 * glsl_type::count_attribute_slots(false), which already handles
these cases correctly.
Partially fixes rendering in GFXBench 4.0's tessellation benchmark.
(NVE0 is almost right after this, but i965 is still mostly garbage.)
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 7cdc2b9ca0)
[Emil Velikov: resolve trivial conflicts]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/glsl/link_varyings.cpp
This doesn't apply to other stages. This is only
used in the mesa/st code, which needs further fixes.
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 1fc39dae22)
So vertex shader input attributes are handled different than internal
varyings between shader stages, dvec3 and dvec4 only count as
one slot for vertex attributes, but for internal varyings, they
count as 2.
This patch comments all the uses of this API to clarify what we
pass in, except one which needs further investigation
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
(cherry picked from commit 5dc22cadb5)
The old function didn't work for matrices, and we need this
in other places to fix some other problems, so move to a helper
in glsl type and fix the one user so far.
A dual slot double is one that has 3 or 4 components in it's
base type.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
(cherry picked from commit d97b060e6f)
Unigine Heaven 4.0 and Valley 1.0 use dual color blending but don't
specify which fragment shader output is which, so there's at best a
50/50 chance of us guessing it correctly. This is invalid.
Unigine fixed this in 4.1 and 1.1 versions over a year and a half ago,
but hasn't actually released them for whatever reason. So, add the
workaround back so that it works for most people.
Fixes Heaven 4.0/Valley 1.0 rendering on Ivybridge. For whatever
reason, Broadwell worked. 4.1 and 1.1 have always worked.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92233
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 4acf71c89b)
I was cleverly using one iteration to obtain a pointer to the last item
in ralloc's singly list child list, while also setting parents.
Unfortunately, I forgot to set the parent on that last item.
Cc: "11.1 11.0 10.6" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 14193e4643)
This patch modifies the SSE4.1 test in configure.ac to use a global
variable to initialize vector variables. In addition, we now return the
value of the computation instead of 0.
This is done so gcc 4.9 (and lower) won't optimize the SSE4.1 assembly
instructions (when using -O1 and higher), because then the configure test
might incorrectly pass even though the assembler doesn't support the
SSE4.1 instructions (the test will pass because the compiler does support the intrinsics).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91806
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 6e44bbe0f5)
It's really harsh to abort() the X Server because of a momentary failure
(particularly -ENOMEM). I don't see a way to pass an -ENOMEM up the stack
from here, but we can at least log to stderr before proceeding on.
Cc: "11.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 02bcb443ee)
GL_DRAW_FRAMEBUFFER does not exist in OpenGL ES 1.x, and since
_mesa_meta_begin hasn't been called yet, we have to work-around API
difficulties. The whole reason that GL_DRAW_FRAMEBUFFER is used instead
of GL_FRAMEBUFFER is that the read framebuffer may be different. This
is moot in OpenGL ES 1.x.
I have another patch series that would also fix this (by removing the
calls to _mesa_BindFramebuffer and friends), but it's not quite ready
yet... and I think it may be a bit heavy for some stable branches.
Consider this a stop-gap fix.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93215
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit 96dc732ed8)
GRID Autosport uses SSO shaders. When a tessellation evaluation shader
is passed through this, it triggers assertion failures down the line
with unassigned varying locations. Make sure to do this when the first
shader in the pipeline is not a vertex shader.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit eca8f38dcf)
commit 839793680f "MESA_FORMAT_B8G8R8X8_SRGB for RGB visuals" causes a
handfull of regressions, some of which listed in fdo#92759.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
brw_init_surface_formats overrides the render format for RGBX formats
which aren't supported for rendering so that they internally use RGBA
instead. However, B8G8R8X8_SRGB was missing so it wasn't marked as a
renderable format. This patch just adds it.
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 43f4be5f06)
With the current algorithm, we only look at tex uses. However there's a
write-after-write hazard where we might decide to, on some path, not use
a texture's output at all, but instead to write a different value to
that register. However without the barrier, the texture might complete
later and overwrite that value.
This fixes Unreal Elemental demo on GK110/GK208, flightgear on GK10x,
and likely other random-looking failures.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 7752bbc44e)
This is the recommended setting according to hw people and it makes Hyper-Z
stable. Just the two magic states.
This fixes Evergreen, Cayman, SI, CI, VI (using the Cayman code).
Cc: 11.0 11.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d3c08309ab)
If we have a dmat2[4], then dmat2[0] is at 17, dmat2[1] at 19,
dmat2[2] at 21 etc. The old code was returning 17,18,19.
I think this code is also wrong for float matricies as well.
There is now a piglit for the float case.
This partly fixes:
GL41-CTS.vertex_attrib_64bit.limits_test
[airlied: update with Tapani suggestion to clean it up].
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 18ad641c3b)
In case a state tracker unbinds every slot by a seperate
pipe->set_vertex_buffers() call, starting from slot zero, the number
of bound buffers would not reach zero at all.
The current algorithm does not account for pre-existing holes in the
buffer list.
Unbinding all buffers at once or starting at the top-most slot results
in correct behaviour.
Calculating the correct number of bound buffers fixes a NULL pointer
dereference in nvc0_validate_vertex_buffers_shared().
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93004
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 79bff488bc)
Doesn't have any effect in practice I don't think, but
CTS reads back using GetVertexAttrib.
This fixes: GL41-CTS.vertex_attrib_64bit.get_vertex_attrib
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 21abaad8fe)
This fixes:
glsl-1.50/execution/geometry/dynamic_input_array_index.shader_test
my profanity.
We need to load the AR register with the value from the index reg
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit cce3864046)
These utilities are to be used to do things like integer adds and
multiplies to be used in calculating the LDS offsets etc.
It handles CAYMAN MULLO differences as well.
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 0696ebc899)
This fixes:
arb_transform_feedback3-ext_interleaved_two_bufs_gs
arb_transform_feedback3-ext_interleaved_two_bufs_gs_max
transform-feedback-builtins
If we are only emitting one ring, then emit all output
buffers on it.
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit e97ac006d7)
[Emil Velikov: squash trivial conflicts]
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Conflicts:
src/gallium/drivers/r600/r600_shader.c
The only effect here is a space savings - 822 programs in shader-db
affected with the following overall change:
total bytes used in shared programs : 44154976 -> 44139880 (-0.03%)
Fixes: 641eda0c (nv50/ir: r63 is only 0 if we are using less than 63 registers)
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f920f8eb02)
... and allow the "binding" qualifier in ES 3.1 as well.
GLSL ES 3.1 incorporates only a few features from the extension
ARB_shading_language_420pack: the relaxed qualifier ordering
requirements and the binding qualifier.
Cc: "11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit eca846e7ae)
The one and only place where the FS backend allows reladdr is on uniforms.
For locals, inputs, and outputs, we lower it away before the backend ever
sees it. This commit gets rid of the dead indirect handling code.
Cc: "11.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 22c273de2b)
Previously, the VS_OPCODE_PULL_CONSTANT_LOAD opcode operated on
vec4-aligned byte offsets on Iron Lake and below and worked in terms of
vec4 offsets on Sandy Bridge. On Ivy Bridge, we add a new *LOAD_GEN7
variant which works in terms of vec4s. We're about to change the GEN7
version to work in terms of bytes, so this is a nice unification.
Cc: "11.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit e3e70698c3)
According to nvdisasm both the immediate and non-imm cases use the same
bits. Both of these flags are quite rarely set though.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 1d708aacb7)
We actually leave the sampler unset for OP_TXF, which caused the GK104+
logic to treat some texel fetches as indirect. While this works, it's
incredibly wasteful. This only happened when the texture was > 0 (since
sampler remained == 0).
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 63b850403c)
From Section 11.1.3.11 (Validation) of the GLES 3.1 spec:
"An INVALID_OPERATION error is generated by any command that trans-
fers vertices to the GL or launches compute work if the current set
of active program objects cannot be executed, for reasons including:"
It then goes on to list the rules we validate in the
_mesa_validate_program_pipeline() function.
For ValidateProgramPipeline the only mention of generating an error is:
"An INVALID_OPERATION error is generated if pipeline is not a name re-
turned from a previous call to GenProgramPipelines or if such a name has
since been deleted by DeleteProgramPipelines,"
Which we handle separately.
This fixes:
ES31-CTS.sepshaderobjs.PipelineApi
No regressions on the eEQP 3.1 tests.
Cc: Gregory Hainaut <gregory.hainaut@gmail.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
(cherry picked from commit c3ec12ec3c)
Nominated-by: Emil Velikov <emil.velikov@collabora.com>
This fixes an issue where the addition of the FLAT qualifier in
varying_matches::record() can break the expected varying order.
It also avoids a future issue with the relaxing of interpolation
qualifier matching constraints in GLSL 4.50.
V2: (by Timothy Arceri)
* reworked comment slightly
Signed-off-by: Gregory Hainaut <gregory.hainaut@gmail.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
(cherry picked from commit 2ab9cd0c4d)
Nominated-by: Timothy Arceri <timothy.arceri@collabora.com>
GL_ARB_separate_shader_objects allow matching by name variable or block
interface. Input varyings can't be removed because it is will impact the
location assignment.
This fixes the bug 79783 and likely any application that uses
GL_ARB_separate_shader_objects extension.
V2 (by Timothy Arceri):
* simplify now that builtins are not set as always active
Signed-off-by: Gregory Hainaut <gregory.hainaut@gmail.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
https://bugs.freedesktop.org/show_bug.cgi?id=79783
(cherry picked from commit 8117f46f49)
Nominated-by: Timothy Arceri <timothy.arceri@collabora.com>
The value will be set in separate-shader program when an input/output
must remains active. e.g. when deadcode removal isn't allowed because
it will create interface location/name-matching mismatch.
v3:
* Rename the attribute
* Use ir_variable directly instead of ir_variable_refcount_visitor
* Move the foreach IR code in the linker file
v4:
* Fix variable name in assert
v5 (by Timothy Arceri):
* Rename functions and reword comments
* Don't set always active on builtins
Signed-off-by: Gregory Hainaut <gregory.hainaut@gmail.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
(cherry picked from commit 618612f867)
Nominated-by: Timothy Arceri <timothy.arceri@collabora.com>
If there were src unpacks, changing to the integer MOV instead of float
(for example) would change the unpack operation.
(cherry picked from commit e3efc4b023)
The caller isn't going to expect it from a return, so it would probably
get misinterpreted. If the caller had an unpack in its reg, that's fine,
but don't lose track of it.
(cherry picked from commit 2591beef89)
I apparently broke this in a late refactor, in such a way that I decided
its tests were some of those interminable ones that I should just
blacklist from my testing. As a result, the refactors related to it were
totally wrong.
(cherry picked from commit 53b2523c6e)
We still have several failures in the newly enabled tests in simulation:
sRGB downsampling is done as if it was just linear, stencil blits are not
supported on MSAA either, and derivatives are still not supported
(breaking some MSAA simulation shaders). So, other than sRGB downsampling
quality, things seem to be in good shape.
(cherry picked from commit f61ceeb3fd)
This is the core of ARB_texture_multisample. Most of the piglit tests for
GL_ARB_texture_multisample require GL 3.0, but exposing support for this
lets us use the gallium blitter for multisample resolves. We can
sometimes multisample resolve using just the RCL, but that requires that
the blit is 1:1, unflipped, and aligned to tile boundaries.
(cherry picked from commit 6b4dfd53ae)
This includes GL_SAMPLE_COVERAGE, GL_SAMPLE_ALPHA_TO_ONE, and
GL_SAMPLE_ALPHA_TO_COVAGE.
I haven't implemented a dithering function yet, and gallium doesn't give
me a good chance to do so for GL_SAMPLE_COVERAGE.
(cherry picked from commit a97b40dca4)
I only stumbled on this while experimenting due to reading about HW-2905.
I don't know if the EZ disable in the Z-clear is actually necessary, but
go with it for now.
(cherry picked from commit edc3305de7)
I was thinking this was the only MSAA resolve thing, so it should be noted
separately, but actually load/store general also do MSAA resolve.
(cherry picked from commit 568d3a8e32)
The recent unaligned fix successfully prevented RCL blits that weren't
aligned inside of the surface, but we also want to be able to do RCL blits
for the whole surface when the width or height of the surface aren't
aligned (we don't care what renders inside of the padding).
(cherry picked from commit bf92017ace)
Even if the rasterizer has scissor disabled, we'll have whatever
vc4->scissor bounds were last set when someone set up a scissor, so we
shouldn't clip to them in that case.
Fixes piglit fbo-blit-rect, and a lot of MSAA tests once they're enabled.
(cherry picked from commit a4eff86f4a)
We could potentially handle scissored blits when they're tile aligned, but
it doesn't seem worth it. If you're doing a scissored blit, you're
probably a testcase.
Fixes piglit's fbo-scissor-blit fbo
(cherry picked from commit d16d666776)
For MSAA, we store full resolution tile buffer contents, which have their
own tiling format. Since they're full resolution buffers, we have to
align their size to full tiles.
(cherry picked from commit 3c3b1184eb)
From the API perspective, writing 1 bits can't turn on pixels that were
off, so we AND it with the sample mask from the payload.
(cherry picked from commit 74c4b3b80c)
We were checking that the blit started at 0 and was 1:1, but not that it
went to the full width of the surface, or that the width was aligned to a
tile. We then told it to blit to the full width/height of the surface,
causing contents to be stomped in a bunch of MSAA tests that happen to
include half-screen-width blits to 0,0.
(cherry picked from commit 3a508a0d94)
I think I may have regressed this in the NIR conversion. TGSI-to-NIR is
putting the PSIZ in the .x channel, not .w, so we were grabbing some
garbage for point size, which ended up meaning just not drawing points.
Fixes glean pointAtten and pointsprite.
(cherry picked from commit 81544f231a)
If we tried to get/set something that was exactly 64 bits, we would
try to do (1 << 64) - 1 to calculate the mask which doesn't give us all
1's like we want.
v2 (Iago)
- Replace ~0 by ~0ull
- Removed unnecessary parenthesis
v3 (Kristian)
- Avoid the conditional
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
(cherry picked from commit b1a83b5d1b)
Squashed with commit
i965: Use ull immediates in brw_inst_bits
This fixes a regression introduced in b1a83b5d1 that caused basically all
shaders to fail to compile on 32-bit platforms.
Reported-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 9d703de85a)
Nominated-by: Ian Romanick <ian.d.romanick@intel.com>
Currently it stores strlen(buf) whenever the user originally provided a
negative value for length.
Although I've not seen any explicit text in the spec, CTS requires that
the very same length (be that negative value or not) is returned back on
Pop.
So let's push down the length < 0 checks, tweak the meaning of
gl_debug_message::length and fix GetDebugMessageLog to add and count the
null terminators, as required by the spec.
v2: return correct total length in GetDebugMessageLog
v3: rebase (drop _mesa_shader_debug hunk).
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
(cherry picked from commit 5a23f6bd8d)
We're about to rework the meaning of gl_debug_message::length to only
store the user provided data. Thus we should add an explicit validation
for null terminated strings.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
(cherry picked from commit 622186fbdf)
These new (relative to ARB_debug_output) tokens, have been explicitly
separated from the existing ones in the spec text. With the reference
to glDebugMessageInsert was dropped.
At the same time, further down the spec says:
"The value of <type> must be one of the values from Table 5.4"
... and these two are listed in Table 5.4.
The GL 4.3 and GLES 3.2 do not give any hints on the former
'definition', plus CTS requires that the tokens are valid values for
glDebugMessageInsert.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
(cherry picked from commit 66fea8bd96)
As per the spec quote:
"All messages are initially enabled unless their assigned severity
is DEBUG_SEVERITY_LOW"
We already had MEDIUM and HIGH set, let's toggle NOTIFICATION as well.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
(cherry picked from commit 53be28107b)
We already have one group (the default) as specified in the spec. So
lets return its size, rather than the index of the current group.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
(cherry picked from commit 078dd6a0b4)
The extension requires (cough implements) GetPointervKHR (alias of
GetPointerv) which in itself is available for ES 1.1 enabled mesa.
Anyone willing to fish around and implement it for ES 1.0 is more than
welcome to revert this commit. Until then lets restrict things.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93048
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
(cherry picked from commit 1ca735701b)
There was only a single user which was using strlen(buf).
As this function is not user facing (i.e. we don't need to feed back
original length via a callback), we can simplify things.
Suggested-by: Timothy Arceri <timothy.arceri@collabora.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
(cherry picked from commit d37ebed470)
A situation where there's a 128-bit load where the last component gets
DCE'd causes a 96-bit load to be generated, which no GPU can actually
emit. Avoid generating such instructions by scaling back to 64-bit on
the first load when splitting.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 49692f86a1)
Atomic counters and Images were using ctx::Shader that does not take in
to account program pipeline changes, ctx::_Shader must be used for SSO to
work. Commit c0347705 already changed ubo's to use this.
Fixes failures seen with following Piglit test:
arb_separate_shader_object-atomic-counter
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 231db5869c)
For example if there are only returns, the break bb will not end up part
of the CFG. However there will have been a prebreak already emitted for
it, and when hitting the RET that comes after, we will try to insert the
current (i.e. break) BB into the graph even though it will be
unreachable. This makes the SSA code sad.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit adcc547bfb)
These are implementation-dependent queries, but so far we just returned the
value of whatever the current provoking vertex convention was set to, which
was clearly wrong.
Just make this a variable in the context constants like for other things
which are implementation dependent (I assume all drivers will want to set
this to the same value for both queries), and set it to GL_UNDEFINED_VERTEX
which is correct for everybody (and drivers can override it).
Reviewed-by: Brian Paul <brianp@vmware.com>
CC: <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 09f74e6ef4)
When probing for devices, clover will call pipe_loader_probe() twice.
The first time to retrieve the number of devices, and then second time
to retrieve the device structures.
We currently assume that the return value of both calls will be the
same, but this will not be the case if a device happens to disappear
between the two calls.
When a device disappears, the pipe_loader_probe() will add a NULL
device to the device list, so we need to handle this.
v2:
- Keep range for loop
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
CC: <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 9adbb9e713)
We need to emit at least one cut/emit in every
geometry shader, the easiest workaround it to
stick a single CUT at the top of each geom shader.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: "10.6 11.0 11.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 4f34722575)
It looks like the sampler hardware doesn't take into account the
surface format when sampling a cleared color after a fast clear has
been done. So for example if you clear a GL_RED surface to 1,1,1,1
then the sampling instructions will return 1,1,1,1 instead of 1,0,0,1.
This patch makes it override the color that is programmed in the
surface state in order to swizzle for luminance and intensity as well
as overriding the missing components.
Fixes the ext_framebuffer_multisample-fast-clear Piglit test.
v2: Handle luminance and intensity formats
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com>
(cherry picked from commit 2010de4015)
A prior, literal reading of the ASTC spec led to the prohibition
of some compressed formats being used against the targets:
TEXTURE_CUBE_MAP_ARRAY and TEXTURE_3D. Since the spec does not specify
interactions with other extensions for specific compressed textures,
remove such interactions.
Fixes the following Piglit tests on Gen9:
piglit.spec.arb_direct_state_access.getcompressedtextureimage
piglit.spec.arb_get_texture_sub_image.arb_get_texture_sub_image-getcompressed
piglit.spec.arb_texture_cube_map_array.fbo-generatemipmap-cubemap array s3tc_dxt1
piglit.spec.ext_texture_compression_s3tc.getteximage-targets cube_array s3tc
v2. Don't interact with other specific compressed formats (Ian).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91927
Suggested-by: Neil Roberts <neil@linux.intel.com>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
(cherry picked from commit d1212abf50)
Provide the ability to prevent any permanently enabled extension
from appearing in the string returned by glGetString[i]().
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Tested-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 21d43fe51a)
Add some checks if the original/dup'd fd is valid and ensure that we
don't leak it on error. The former is implicitly handled within the
pipe_loader, although let's make things explicit and check beforehand.
Spotted by Coverity (CID 1339865)
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit d90ba57c08)
In theory this wouldn't be an issue, as we'll find the correct name and
break out of the loop before we hit the sentinel.
Let's fix this and avoid issues in the future.
Spotted by Coverity (CID 1339869, 1339870, 1339871)
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 5f92906b87)
Non-timer queries are suspended during blits. When the blits end, the queries
are resumed, but this resume operation itself might run out of CS space and
trigger a flush. When this happens, we must prevent a duplicate suspend during
preflush suspend, and we must also prevent a duplicate resume when the CS flush
returns back to the original resume operation.
This fixes a regression that was introduced by:
commit 8a125afa6e
Author: Nicolai Hähnle <nhaehnle@gmail.com>
Date: Wed Nov 18 18:40:22 2015 +0100
radeon: ensure that timing/profiling queries are suspended on flush
The queries_suspended_for_flush flag is redundant because suspended queries
are not removed from their respective linked list.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reported-by: Axel Davy <axel.davy@ens.fr>
Cc: "11.1" <mesa-stable@lists.freedesktop.org>
Tested-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 9e5e702cfb)
Previously (with the inline ones) things were embedded into the
pipe-loader, which means that we cannot control/select what we want in
each target.
That also meant that at runtime we ended up with the empty
sw_screen_create() as the GALLIUM_SOFTPIPE/LLVMPIPE were not set.
v2: Cover all the targets, not just dri.
Cc: "11.1" <mesa-stable@lists.freedesktop.org>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Oded Gabbay <oded.gabbay@gmail.com>
Tested-by: Nick Sarnie <commendsarnex@gmail.com>
(cherry picked from commit 59cfb21d46)
Squashed with commit
targets/xvmc: use the non-inline sw helpers
This was missed in commit 59cfb21d ("targets: use the non-inline sw
helpers").
Fixes build failure:
CXXLD libXvMCgallium.la
../../../../src/gallium/auxiliary/pipe-loader/.libs/libpipe_loader_static.a(libpipe_loader_static_la-pipe_loader_sw.o):(.data.rel.ro+0x0): undefined reference to `sw_screen_create'
collect2: error: ld returned 1 exit status
Makefile:756: recipe for target 'libXvMCgallium.la' failed
make[3]: *** [libXvMCgallium.la] Error 1
Trivial.
(cherry picked from commit 22d2dda03b)
While we correctly set output[] for composite varyings, we set completely
bogus values for output_components[], making emit_urb_writes() output
zeros instead of the actual values.
Unfortunately, our simple approach goes out the window, and we need to
recurse into structs to get the proper value of vector_elements for each
field.
Together with the previous patch, this fixes rendering in an upcoming
game from Feral Interactive.
v2: Use pointers instead of pass-by-mutable-reference (Jason, Matt).
Cc: "11.1 11.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 3810c15614)
Apparently we have literally no support for FS varying struct inputs.
This is somewhat surprising, given that we've had tests for that very
feature that have been passing for a long time.
Normally, varying packing splits up structures for us, so we don't see
them in the backend. However, with SSO, varying packing isn't around
to save us, and we get actual structs that we have to handle.
This patch changes fs_visitor::emit_general_interpolation() to work
recursively, properly handling nested structs/arrays/and so on.
(It's easier to read with diff -b, as indentation changes.)
When using the vec4 VS backend, this fixes rendering in an upcoming
game from Feral Interactive. (The scalar VS backend requires additional
bug fixes in the next patch.)
v2: Use pointers instead of pass-by-mutable-reference (Jason, Matt).
Cc: "11.1 11.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 3e9003e9cf)
Enables 200+ dEQP SSO tests to proceed past validation,
and fixes a ES31-CTS.sepshaderobjs.PipelineApi subtest.
V2: split out change that reverts a previous patch into its own commit,
move variable declaration to top of function, and fix some formatting
all suggested by Ian.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Cc: "11.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 2571a768d6)
This reverts commit ba02f7a3b6.
The commit checked whether the pipeline was currently bound instead
of checking whether it had ever been bound. The previous setting
of Validated during object creation makes this unnecessary. The
real problem was that Validated was not properly set to false
elsewhere in the code. This is fixed by a later patch.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Cc: "11.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 3c4aa7aff2)
This should fix the getteximage-depth test that currently asserts.
I was hitting problem with virgl as well in this area.
This moves the 1D array handling code to a single place.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: "10.6 11.0 11.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 237bcdbab5)
It appears that the hardware wants the integer to be scaled the same way
that the hardware representation is. snorm16 uses one of the float
factors, so this is only relevant for snorm8.
This fixes a number of subcases of
bin/fbo-blending-formats GL_EXT_texture_snorm
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 81b16350fa)
Not too long ago, the dri3 code was living in src/glx, which in itself
was guarded by HAVE_DRI_GLX. As the name suggests we didn't dive into
the folder when dri was disabled, thus we missed that dri3 does not
consider/honour --enable-dri.
Cc: mesa-stable@lists.freedesktop.org
Fixes: 6bd9ba7d07 "loader: Add dri3 helper"
Cc: Pali Rohár <pali.rohar@gmail.com>
Reported-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit b89d1b2ccf)
In case that the buffer has no bind at all, assume it can be a regular
buffer. This can happen on buffers created through the ARB_dsa
interfaces.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit ad5f6b03e7)
With ARB_direct_state_access, buffers can be created without any binding
hints at all. We still need to allocate these buffers to VRAM or GART,
as we don't have logic down the line to place them into GPU-mappable
space. Ideally we'd be able to shift these things around based on usage.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92438
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 079f713754)
They're exclusive at build time, but the ilo entry is always present, so
we'd try to use it and fail out.
v2: Add comment in the code, from Emil.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 1b62a4e885)
Same fix as on a3xx - set the second (tiny) layer size bitfield to the
smallest level's size so that the hw knows not to minify beyond that.
This fixes texelFetch sampler3D piglits.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 740eb63aa7)
When layer is the container, slices are tightly packed inside of each
layer. We don't need any additional alignment. On a3xx, each slice
contains all the layers, so having alignment makes sense.
This fixes a whole slew of array-related piglits, including texelFetch
and tex-miplevel-selection varieties.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit ecb0dcd34c)
This setting is only used by glTexCoordPointer and related glEnable
calls. Since the preceeding commits removed all of those, it is not
necessary to save, reset to default, or restore this state.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit 47b3a0d235)
Nothing left in meta does anything with the VBO binding, so we don't
need to save or restore it. The VAO binding is still modified.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit c63f9c735d)
tl;dr: For many types of GL object, we can *NEVER* use the Gen function.
In OpenGL ES (all versions!) and OpenGL compatibility profile,
applications don't have to call Gen functions. The GL spec is very
clear about how you can mix-and-match generated names and non-generated
names: you can use any name you want for a particular object type until
you call the Gen function for that object type.
Here's the problem scenario:
- Application calls a meta function that generates a name. The first
Gen will probably return 1.
- Application decides to use the same name for an object of the same
type without calling Gen. Many demo programs use names 1, 2, 3,
etc. without calling Gen.
- Application calls the meta function again, and the meta function
replaces the data. The application's data is lost, and the app
fails. Have fun debugging that.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92363
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit 58aa56d40b)
tl;dr: For many types of GL object, we can *NEVER* use the Gen function.
In OpenGL ES (all versions!) and OpenGL compatibility profile,
applications don't have to call Gen functions. The GL spec is very
clear about how you can mix-and-match generated names and non-generated
names: you can use any name you want for a particular object type until
you call the Gen function for that object type.
Here's the problem scenario:
- Application calls a meta function that generates a name. The first
Gen will probably return 1.
- Application decides to use the same name for an object of the same
type without calling Gen. Many demo programs use names 1, 2, 3,
etc. without calling Gen.
- Application calls the meta function again, and the meta function
replaces the data. The application's data is lost, and the app
fails. Have fun debugging that.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92363
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit 76cfe2bc44)
tl;dr: For many types of GL object, we can *NEVER* use the Gen function.
In OpenGL ES (all versions!) and OpenGL compatibility profile,
applications don't have to call Gen functions. The GL spec is very
clear about how you can mix-and-match generated names and non-generated
names: you can use any name you want for a particular object type until
you call the Gen function for that object type.
Here's the problem scenario:
- Application calls a meta function that generates a name. The first
Gen will probably return 1.
- Application decides to use the same name for an object of the same
type without calling Gen. Many demo programs use names 1, 2, 3,
etc. without calling Gen.
- Application calls the meta function again, and the meta function
replaces the data. The application's data is lost, and the app
fails. Have fun debugging that.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92363
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit 37d11b13ce)
The fixed-function attribute paths don't get the DSA treatment because
there are no DSA entry-points for fixed-function attributes. These
could have been added, but this is a temporary patch intended to make
later patches easier to review.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit 52921f8e08)
Meta currently does this, but future changes will make this impossible.
Explicitly do it as a step in the patch series now to catch any possible
kinks.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit 3b5a7d450d)
tl;dr: For many types of GL object, we can *NEVER* use the Gen function.
In OpenGL ES (all versions!) and OpenGL compatibility profile,
applications don't have to call Gen functions. The GL spec is very
clear about how you can mix-and-match generated names and non-generated
names: you can use any name you want for a particular object type until
you call the Gen function for that object type.
Here's the problem scenario:
- Application calls a meta function that generates a name. The first
Gen will probably return 1.
- Application decides to use the same name for an object of the same
type without calling Gen. Many demo programs use names 1, 2, 3,
etc. without calling Gen.
- Application calls the meta function again, and the meta function
replaces the data. The application's data is lost, and the app
fails. Have fun debugging that.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92363
Reviewed-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit 4e6b9c11fc)
Instead of going through the GL API implementation functions, use the
lower-level functions. This means that we have to keep track of a
pointer to the gl_buffer_object and the gl_vertex_array_object.
This has two advantages. First, it avoids a bunch of CPU overhead in
looking up objects and validing API parameters. Second, and much more
importantly, it will allow us to stop calling _mesa_GenBuffers /
_mesa_CreateBuffers and pollute the buffer namespace (next patch).
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit e62799bd4e)
Future patches will use the brw_context instead. Keeping this
non-functional change separate should make the function changes easier
to review.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit dcadd855f1)
Pulls the parts of enable_vertex_array_attrib that aren't just parameter
validation out into a function that can be called from other parts of
Mesa (e.g., meta).
_mesa_enable_vertex_array_attrib can also be used to enable
fixed-function arrays.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit 4a644f1caa)
Pulls the parts of update_array_format that aren't just parameter
validation out into a function that can be called from other parts of
Mesa (e.g., meta).
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit a336fcd36a)
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=38109">Bug 38109</a> - i915 driver crashes if too few vertices are submitted (Mesa 7.10.2)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=49779">Bug 49779</a> - Extra line segments in GL_LINE_LOOP</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=55552">Bug 55552</a> - Compile errors with --enable-mangling</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=71789">Bug 71789</a> - [r300g] Visuals not found in (default) depth = 24</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=79783">Bug 79783</a> - Distorted output in obs-studio where other vendors "work"</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=80821">Bug 80821</a> - When LIBGL_ALWAYS_SOFTWARE is set, KHR_create_context is not supported</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=81174">Bug 81174</a> - Gallium: GL_LINE_LOOP broken with more than 512 points</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=83508">Bug 83508</a> - [UBO] Assertion for array of blocks</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=84677">Bug 84677</a> - Triangle disappears with glPolygonMode GL_LINE</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=86720">Bug 86720</a> - [radeon] Europa Universalis 4 freezing during game start (10.3.3+, still broken on 11.0.2)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=89014">Bug 89014</a> - PIPE_QUERY_GPU_FINISHED is not acting as expected on SI</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=90175">Bug 90175</a> - [hsw bisected][PATCH] atomic counters doesn't work for a binding point different to zero</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=90348">Bug 90348</a> - Spilling failure of b96 merged value</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=90631">Bug 90631</a> - Compilation failure for fragment shader with many branches on Sandy Bridge</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=90734">Bug 90734</a> - glBufferSubData is corrupting data when buffer is > 32k</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=90887">Bug 90887</a> - PhiMovesPass in register allocator broken</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=91044">Bug 91044</a> - piglit spec/egl_khr_create_context/valid debug flag gles* fail</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=91254">Bug 91254</a> - (regresion) video using VA-API on Intel slow and freeze system with mesa 10.6 or 10.6.1</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=91292">Bug 91292</a> - [BDW+] glVertexAttribDivisor not working in combination with glPolygonMode</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=91342">Bug 91342</a> - Very dark textures on some objects in indoors environments in Postal 2</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=91526">Bug 91526</a> - World of Warcraft (on Wine) has UI corruption with nouveau</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=91551">Bug 91551</a> - DXTn compressed normal maps produce severe artifacts on all NV5x and NVDx chipsets</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=91596">Bug 91596</a> - EGL_KHR_gl_colorspace (v2) causes problem with Android-x86 GUI</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=91716">Bug 91716</a> - [bisected] piglit.shaders.glsl-vs-int-attrib regresses on 32 bit BYT, HSW, IVB, SNB</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=91719">Bug 91719</a> - [SNB,HSW,BYT] dEQP regressions associated with using NIR for vertex shaders</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=91726">Bug 91726</a> - R600 asserts in tgsi_cmp/make_src_for_op3</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=91780">Bug 91780</a> - Rendering issues with geometry shader</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=91785">Bug 91785</a> - make check DispatchSanity_test.GLES31 regression</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=91788">Bug 91788</a> - [HSW Regression] Synmark2_v6 Multithread performance case FPS reduced by 36%</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=91847">Bug 91847</a> - glGenerateTextureMipmap not working (no errors) unless glActiveTexture(GL_TEXTURE1) is called before</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=91857">Bug 91857</a> - Mesa 10.6.3 linker is slow</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=91881">Bug 91881</a> - regression: GPU lockups since mesa-11.0.0_rc1 on RV620 (r600) driver</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=91898">Bug 91898</a> - src/util/mesa-sha1.c:250:25: fatal error: openssl/sha.h: No such file or directory</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=92052">Bug 92052</a> - nir/nir_builder.h:79: error: expected primary-expression before ‘.’ token</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=92054">Bug 92054</a> - make check gbm-symbols-check regression</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=92066">Bug 92066</a> - [ILK,G45,regression] New assertion on BRW_MAX_MRF breaks ilk and g45</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=92072">Bug 92072</a> - Wine breakage since d082c5324 (st/mesa: don't call st_validate_state in BlitFramebuffer)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=92122">Bug 92122</a> - [bisected, cts] Regression with Assault Android Cactus</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=92124">Bug 92124</a> - shader_query.cpp:841:34: error: ‘strndup’ was not declared in this scope</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=92183">Bug 92183</a> - linker.cpp:3187:46: error: ‘strtok_r’ was not declared in this scope</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=92214">Bug 92214</a> - Flightgear crashes during splashboot with R600 driver, LLVM 3.7.0 and mesa 11.0.2</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=92221">Bug 92221</a> - Unintended code changes in _mesa_base_tex_format commit</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=92265">Bug 92265</a> - Black windows in weston after update mesa to 11.0.2-1</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=92363">Bug 92363</a> - [BSW/BDW] ogles1conform Gets test fails</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=92437">Bug 92437</a> - osmesa: Expose GL entry points for Windows build, via .def file</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=92438">Bug 92438</a> - Segfault in pushbuf_kref when running the android emulator (qemu) on nv50</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=92621">Bug 92621</a> - [G965 ILK G45] Regression: 24 piglit regressions in glsl-1.10</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=92623">Bug 92623</a> - Differences in prog_data ignored when caching fragment programs (causes hangs)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=92634">Bug 92634</a> - gallium's vl_mpeg12_decoder does not work with st/va</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=92705">Bug 92705</a> - [clover] fail to build with llvm-svn/clang-svn 3.8</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=92709">Bug 92709</a> - "LLVM triggered Diagnostic Handler: unsupported call to function ldexpf in main" when starting race in stuntrally</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=92738">Bug 92738</a> - Randon R7 240 doesn't work on 16KiB page size platform</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=92744">Bug 92744</a> - [g965 Regression bisected] Performance regression and piglit assertions due to liveness analysis</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=92900">Bug 92900</a> - [regression bisected] About 700 piglit regressions is what could go wrong</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=92909">Bug 92909</a> - Offset/alignment issue with layout std140 and vec3</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=92985">Bug 92985</a> - Mac OS X build error "ar: no archive members specified"</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=93015">Bug 93015</a> - Tonga Elemental segfault + VM faults since radeon: implement r600_query_hw_get_result via function pointers</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=93235">Bug 93235</a> - [regression] dispatch sanity broken by GetPointerv</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=93266">Bug 93266</a> - gl_arb_shading_language_420pack does not allow binding of image variables</li>
</ul>
<h2>Changes</h2>
TBD.
<li>MPEG4 decoding has been disabled by default in the VAAPI driver</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=91596">Bug 91596</a> - EGL_KHR_gl_colorspace (v2) causes problem with Android-x86 GUI</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=93628">Bug 93628</a> - Exception: attempt to use unavailable module DRM when building MesaGL 11.1.0 on windows</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=93648">Bug 93648</a> - Random lines being rendered when playing Dolphin (geometry shaders related, w/ apitrace)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=93650">Bug 93650</a> - GL_ARB_separate_shader_objects is buggy (PCSX2)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=93717">Bug 93717</a> - Meta mipmap generation can corrupt texture state</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=93722">Bug 93722</a> - Segfault when compiling shader with a subroutine that takes a parameter</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=93731">Bug 93731</a> - glUniformSubroutinesuiv segfaults when subroutine uniform is bound to a specific location</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=93761">Bug 93761</a> - A conditional discard in a fragment shader causes no depth writing at all</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=94073">Bug 94073</a> - Miscompilation of abs_vec3_vert_xvary_ref.vert in WebGL conformance</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=94193">Bug 94193</a> - [llvmpipe] Line antialiasing looks different when GL_LINE_STIPPLE is enabled with pattern 0xffff</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=94195">Bug 94195</a> - [llvmpipe] Does not build with LLVM 3.7.x on Windows</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=94481">Bug 94481</a> - softpipe - access violation in img_filter_2d_nearest</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=94595">Bug 94595</a> - [Mesa AMD&swrast] Texture views attached as framebuffers return their viewed tecture's color encoding and render incorrectly</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=94954">Bug 94954</a> - test_vec4_copy_propagation fails in `make check`</li>
</ul>
<h2>Changes</h2>
<p>Anuj Phogat (1):</p>
<ul>
<li>i965: Fix assert conditions for src/dst x/y offsets</li>
</ul>
<p>Ben Widawsky (2):</p>
<ul>
<li>i965: Make sure we blit a full compressed block</li>
<li>i965/skl: Add two missing device IDs</li>
</ul>
<p>Brian Paul (1):</p>
<ul>
<li>mesa: fix incorrect viewport position when GL_CLIP_ORIGIN = GL_LOWER_LEFT</li>
</ul>
<p>Chris Forbes (1):</p>
<ul>
<li>i965/blorp: Fix hiz ops on MSAA surfaces</li>
</ul>
<p>Christian König (1):</p>
<ul>
<li>radeon/uvd: disable MPEG1</li>
</ul>
<p>Christian Schmidbauer (1):</p>
<ul>
<li>st/nine: specify WINAPI only for i386 and amd64</li>
</ul>
<p>Daniel Czarnowski (3):</p>
<ul>
<li>egl_dri2: NULL check for xcb_dri2_get_buffers_reply()</li>
<li>egl_dri2: set correct error code if swapbuffers fails</li>
<li>egl: support EGL_LARGEST_PBUFFER in eglCreatePbufferSurface(...)</li>
</ul>
<p>Dave Airlie (1):</p>
<ul>
<li>mesa/fbobject: propogate Layered when reusing attachments.</li>
</ul>
<p>Derek Foreman (1):</p>
<ul>
<li>egl/wayland: Try to use wl_surface.damage_buffer for SwapBuffersWithDamage</li>
</ul>
<p>Dongwon Kim (1):</p>
<ul>
<li>egl: move Null check to eglGetSyncAttribKHR to prevent Segfault</li>
</ul>
<p>Emil Velikov (10):</p>
<ul>
<li>docs: add sha256 checksums for 11.1.2</li>
<li>get-pick-list.sh: Require explicit "11.1" for nominating stable patches</li>
<li>cherry-ignore: do not pick nv50/ir commit</li>
<li>automake: add nine to make distcheck</li>
<li>install-gallium-links: port changes from install-lib-links</li>
<li>automake: add more missing options for make distcheck</li>
<li>mesa; add get-extra-pick-list.sh script into bin/</li>
<li>egl/x11: check the return value of xcb_dri2_get_buffers_reply()</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=94955">Bug 94955</a> - Uninitialized variables leads to random segfaults (valgrind log, apitrace attached)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=94994">Bug 94994</a> - OSMesaGetProcAdress always fails on mangled OSMesa</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=95026">Bug 95026</a> - Alien Isolation segfault after initial loading screen/video</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=95133">Bug 95133</a> - X-COM Enemy Within crashes when entering tactical mission with Bonaire</li>
</ul>
<h2>Changes</h2>
<p>Brian Paul (1):</p>
<ul>
<li>gallium/util: initialize pipe_framebuffer_state to zeros</li>
</ul>
<p>Chad Versace (1):</p>
<ul>
<li>dri: Fix robust context creation via EGL attribute</li>
</ul>
<p>Egbert Eich (1):</p>
<ul>
<li>dri2: Check for dummyContext to see if the glx_context is valid</li>
</ul>
<p>Emil Velikov (5):</p>
<ul>
<li>docs: add sha256 checksums for 11.1.3</li>
<li>cherry-ignore: add non-applicable "fix of a fix"</li>
<li>cherry-ignore: ignore st_DrawAtlasBitmaps mem leak fix</li>
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
