Some application, such as drm backend of weston, uses XRGB8888 config as
default. i965 doesn't provide this format, but before commit 65c8965d,
the drm platform of EGL takes ARGB8888 as XRGB8888. Now that commit
65c8965d makes EGL recognize format correctly so weston won't start
because it can't find XRGB8888. Add XRGB8888 format to i965 just as
other drivers do.
Cc: mesa-stable@lists.freedesktop.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89689
Signed-off-by: Boyan Ding <boyan.j.ding@gmail.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
(cherry picked from commit 28090b30dd)
src1 would contain the predicate, which would get emitted as a register
source by an undiscerning srcId helper. Work around this in the same way
as in emitTEX.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit a9d08a250a)
Squashed with commit
nvc0/ir: fix predicated PFETCH for real
Commit a9d08a250 accidentally didn't make use of the new src1 variable.
Use it.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 33f0d1138d)
The BLT engine on Gen8+ requires linear surfaces to be cacheline
aligned. This restriction was added as part of converting the BLT to
use 48-bit addressing.
intel_emit_linear_blit needs to handle blits that are not cacheline
aligned, as we use it for arbitrary glBufferSubData calls and subrange
mappings.
Since intel_emit_linear_blit uses 1 byte per pixel, we can use the src/dst
pixel X offset field to represent the unaligned portion, and subtract
that from the address so it's cacheline aligned.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88521
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 8c17d53823)
We were resetting the prim id count for each run of the prim assembler,
hence this only worked when the draw calls were very small (the exact limit
depending on the vertex size), since larger draw calls get split up.
So, do the same as we do already if there's a gs, reset it to zero explicitly
for every new instance (this possibly could use the same variable but that
isn't doable without some heavy refactoring and I'm not sure it makes sense).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90130.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
CC: <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f2a7fd9943)
This should be more efficient than the previous snprintf() solution.
But more importantly, it avoids a buffer overflow bug that could result
in crashes or unpredictable results when processing very large interface
blocks.
For the app in question, key->length = 103 for some interfaces. The check
if size >= sizeof(hash_key) was insufficient to prevent overflows of the
hash_key[128] array because it didn't account for the terminating zero.
In this case, this caused the call to hash_table_string_hash() to return
different results for identical inputs, and then shader linking failed.
This new solution also takes all structure fields into account instead
of just the first 15 when sizeof(pointer)==8.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 31667e6237)
Commit dd6f641303c(mesa: Build with subdir-objects.) removed the SRCDIR
variable, but forgot to update all references of it.
v2: Fix path - must be relative to LOCAL_PATH. (Chih-Wei)
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Chih-Wei Huang <cwhuang@linux.org.tw>
(cherry picked from commit 669cfc267a)
Required by the i965 driver.
v2:
- Split out the nir_builder_opcodes.h rules.
- Do not unconditionally hide the python command - use $(hide)
- Use LOCAL_EXPORT_C_INCLUDE_DIRS to manage includes for the generated
sources.
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
[Emil Velikov: Split from a larger commit, v2]
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Chih-Wei Huang <cwhuang@linux.org.tw>
(cherry picked from commit 06619749a1)
... via local_shared_libraries. Otherwise the sync/sync.h header won't
be found.
Note: 10.5 and earlier will need similar change in st/egl.
v2: Append the library to the local_shared_libraries list. (Chih-Wei)
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Chih-Wei Huang <cwhuang@linux.org.tw>
(cherry picked from commit 2d06791f6f)
... to manage the LIBDRM*_CFLAGS. The former is the recommended approach
by the Android build system developers while the latter has been
depreciated for quite some time.
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 86919352e3)
This fixes piglit shaders@glsl-fs-uniform-array-loop-unroll with immediate
shader compilation - it's a compiler test, so it has never been translated
to TGSI before.
Cc: 10.4 10.5 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 14c5bc3b9a)
new_prim was declared as a stack variable within a nested scope; we
tried to retain a pointer to that data beyond the scope, which is bogus.
GCC with -O1 eliminated most of the code that set new_prim's fields.
Move the declaration to fix the bug.
v2: Also fix new_ib (thanks to Matt Turner and Ben Widawsky).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81025
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 406df68736)
We create textures internally for texsubimage, and we use
the values from sub image to create a new texture, however
we don't align these to valid sizes, and cube map arrays
must have an array size aligned to 6.
This fixes texsubimage cube_map_array on CAYMAN at least,
(it was causing GPU hang and bad values), it probably
also fixes it on radeonsi and evergreen.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89957
Tested-by: Tom Stellard <thomas.stellard@amd.com>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit cc5860e407)
Since we can subimage upload a number of cube map array layers,
that aren't a complete cube map array, we should specify things
as a 2D array and blit from that.
Suggested by Ilia Mirkin as an alternate fix for texsubimage
cube map array issues.
seems to work just as well.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 5ed79312ed)
This change fixes a regression with timer queries introduced with
commit 3eb6258. There the pending batchbuffer is flushed
only if glEndQuery is executed. This present change adds such
a flush to glQueryCounter which also schedules a value query
just like glEndQuery does. The patch fixes GPU timer queries
going mad from within osgviewer.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Mathias Froehlich <Mathias.Froehlich@web.de>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 1e1d5456ba)
Accidentally added with commit 64d0f0e3b24(radeonsi: Cache
LLVMTargetMachineRef in context instead of in screen)
Reported-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
In case of using a distribution tarball (or a dirty git tree) one can
have the generated sources locally. Make configure.ac error out
otherwise, to alert that about the unmet requirement(s) of python/mako.
v2: Check only for a single file for each dependency.
Suggested-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 4008975e6f)
When nvc0_push_vbo calls nouveau_scratch_done it does not mean
scratch buffers can be freed immediately. It means "when hardware
advances to this place in the command stream the scratch buffers
can be freed".
To fix it, just postpone scratch runout destruction after current
fence is signalled.
The bug existed for a very long time. Nobody noticed, because
"scratch runout" code path is rarely executed.
Fixes hang at the very beginning of first mission in "Serious Sam 3"
on nve7/gk107. It manifested as:
nouveau E[ PFIFO][0000:01:00.0] read fault at 0x000a9e0000 [PTE] from GR/GPC0/PE_2 on channel 0x007f853000 [Sam3[17056]]
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
(cherry picked from commit f9e2295560)
We limit y-tiling to 0x20 when depth is involved. However the function is
run for each miplevel, and the hardware expects miplevel 0 to have the
highest tiling settings. Perform the y-tiling limit on all levels of a
3d texture, not just the ones that have depth.
Fixes:
texelFetch fs sampler3D 98x129x1-98x129x9
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Tested-by: Nick Tenney <nick.tenney@gmail.com> # GT216
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit ae720c66cb)
Haswell hardware seems to ignore Render Stream Select bits from
3DSTATE_STREAMOUT packet when the SOL stage is disabled even if
the PRM says otherwise. Because of this, all primitives are sent
down the pipeline for rasterization, which is wrong. If SOL is
enabled, Render Stream Select is honored and primitives bound to
non-zero streams are discarded after stream output.
Since the only purpose of primives sent to non-zero streams is to
be recorded by transform feedback, we can simply discard all geometry
bound to non-zero streams then transform feedback is disabled
to prevent it from ever reaching the rasterization stage.
Notice that this patch introduces a small change in the behavior we
get when a geometry shader emits more vertices than the maximum declared:
before, a vertex that was emitted to a non-zero stream when TF was
disabled would still count for the purposes of checking that we don't
exceed the maximum number of output vertices declared by the shader. With
this change, these vertices are completely ignored and won't increase
the output vertex count, making more room for other (hopefully more
useful) vertices.
Fixes piglit test arb_gpu_shader5-emitstreamvertex_nodraw on Haswell
and Broadwell.
v2 (Ken): Drop is_haswell check in favor of doing this unconditionally.
Broadwell needs the workaround as well, and it doesn't hurt to do it in
general. Also tweak comments - the Haswell PRM does actually mention
this ("Command Reference: Instructions" page 797).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83962
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 2042a2f961)
Jordan added this in commit 741782b594 for
Gen7 platforms. I missed this when adding the Broadwell code.
Fixes Piglit's spec/arb_gpu_shader5/invocation-id-{basic,in-separate-gs}
with MESA_EXTENSION_OVERRIDE=GL_ARB_gpu_shader5 set.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit f9e5dc0a85)
The division is probably a holdover from the days when the fixed point
inline functions generated by headergen were broken.
Also reduce the maximum point size to 4092 (vs 4096), which is what the
blob does.
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
(cherry picked from commit 7fc5da8b93)
The SZ2 field contains the layer size of a lower miplevel. It only
contains 4 bits, which limits the maximum layer size it can describe. In
situations where the next miplevel would be too big, the hardware
appears to keep minifying the size until it hits one of that size.
Unfortunately the hardware's ideas about sizes can differ from
freedreno's which can still lead to issues. Minimize those by stopping
to minify as soon as possible.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 738c8319ac)
This output variables gives more flexibility for future changes
in autoconf to detect if it is needed to auto-generate files and
check for the auto-generation dependencies.
It is still returning error when Python is not installed.
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Kai Wasserbäch <kai@dev.carbon-project.org>
(cherry picked from commit ced9425327)
Squashed with commit
configure.ac: move AC_MSG_RESULT reporting back into the m4 macro
The one who does AC_MSG_CHECKING should provide the AC_MSG_RESULT.
Fixes: ced9425327 (configure: Introduce new output variable to
ax_check_python_mako_module.m4"
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89328
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
(cherry picked from commit 248eb54eb6)
in different fragment shaders. This also applies to a case when gl_FragCoord
is redeclared with no layout qualifiers in one fragment shader and not
declared but used in other fragment shader.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Khronos Bug#12957
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
(cherry picked from commit d8208312a3)
glXGetProcAddress("glFoo") ends up in stub_add_dynamic() to
create dynamic stubs for dynamic functions. stub_add_dynamic()
doesn't store the caller provided name string "Foo" in a mesa
private copy, but just stores a pointer to the "glFoo" string
passed to glXGetProcAddress - a pointer into arbitrary memory
outside mesa's control.
If the caller passes some dynamically allocated/changing
memory buffer to glXGetProcAddress(), or the caller gets unmapped
from memory, e.g., some dynamically loaded application
plugin which uses OpenGL, this ends badly - with a dangling
pointer.
strdup() the name string provided by the client to avoid
this problem.
Cc: "10.3 10.4 10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 1110113a7f)
The storage size for local kernel args can be queried before the
arguments are set by using the CL_KERNEL_LOCAL_MEM_SIZE param
of clGetKernelWorkGroupInfo().
The spec says that if local kernel arguments have not been specified,
then we should assume their size is 0.
v2:
- Implement using c++11 member initialization.
Reviewed-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Cc: 10.5 10.4 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit dfb1ae9d91)
Both do_vs_prog and do_gs_prog initialize brw_stage_prog_data::nr_params to
the number of uniform *vectors* required by the shader rather than the number
of uniform components, contradicting the comment. This is inconsistent with
what the state upload code and scalar path expect but it happens to work until
Gen8 because vec4_visitor interprets it as a number of vectors on construction
and later on overwrites its original value with the number of uniform
components referenced by the shader.
Also there's no need to add the number of samplers, they're not actually
passed in as uniforms.
Fixes a memory corruption issue on BDW with SIMD8 VS.
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit fd149628e1)
[Emil Velikov: s/DIV_ROUND_UP/CEILING/]
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
radeon_llvm_emit_prepare_cube_coords uses coords[4] in some cases (TXB2 etc.)
Discovered by Coverity. Reported by Ilia Mirkin.
Cc: 10.5 10.4 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit a984abdad3)
The code for emitting INTEL_swap_events swap completion
events needs to translate from 32-Bit sbc on the wire to
64-Bit sbc for the events and handle wraparound accordingly.
It assumed that events would be sent by the server in the
order their corresponding swap requests were emitted from
the client, iow. sbc count should be always increasing. This
was correct for DRI2.
This is not always the case under the DRI3/Present backend,
where the Present extension can execute presents and send out
completion events in a different order than the submission
order of the present requests, due to client code specifying
targetMSC target vblank counts which are not strictly
monotonically increasing. This confused the wraparound
handling. This patch fixes the problem by handling 32-Bit
wraparound in both directions. As long as successive swap
completion events real 64-Bit sbc's don't differ by more
than 2^30, this should be able to do the right thing.
How this is supposed to work:
awire->sbc contains the low 32-Bits of the true 64-Bit sbc
of the current swap event, transmitted over the wire.
glxDraw->lastEventSbc contains the low 32-Bits of the 64-Bit
sbc of the most recently processed swap event.
glxDraw->eventSbcWrap is a 64-Bit offset which tracks the upper
32-Bits of the current sbc. The final 64-Bit output sbc
aevent->sbc is computed from the sum of awire->sbc and
glxDraw->eventSbcWrap.
Under DRI3/Present, swap completion events can be received
slightly out of order due to non-monotic targetMsc specified
by client code, e.g., present request submission:
Submission sbc: 1 2 3
targetMsc: 10 11 9
Reception of completion events:
Completion sbc: 3 1 2
The completion sequence 3, 1, 2 would confuse the old wraparound
handling made for DRI2 as 1 < 3 --> Assumes a 32-Bit wraparound
has happened when it hasn't.
The client can queue multiple present requests, in the case of
Mesa up to n requests for n-buffered rendering, e.g., n = 2-4 in
the current Mesa GLX DRI3/Present implementation. In the case of
direct Pixmap presents via xcb_present_pixmap() the number n is
limited by the amount of memory available.
We reasonably assume that the number of outstanding requests n is
much less than 2 billion due to memory contraints and common sense.
Therefore while the order of received sbc's can be a bit scrambled,
successive 64-Bit sbc's won't deviate by much, a given sbc may be
a few counts lower or higher than the previous received sbc.
Therefore any large difference between the incoming awire->sbc and
the last recorded glxDraw->lastEventSbc will be due to 32-Bit
wraparound and we need to adapt glxDraw->eventSbcWrap accordingly
to adjust the upper 32-Bits of the sbc.
Two cases, correponding to the two if-statements in the patch:
a) Previous sbc event was below the last 2^32 boundary, in the previous
glxDraw->eventSbcWrap epoch, the new sbc event is in the next 2^32
epoch, therefore the low 32-Bit awire->sbc wrapped around to zero,
or close to zero --> awire->sbc is apparently much lower than the
glxDraw->lastEventSbc recorded for the previous epoch
--> We need to increment glxDraw->eventSbcWrap by 2^32 to adjust
the current epoch to be one higher than the previous one.
--> Case a) also handles the old DRI2 behaviour.
b) Previous sbc event was above closest 2^32 boundary, but now a
late event from the previous 2^32 epoch arrives, with a true sbc
that belongs to the previous 2^32 segment, so the awire->sbc of
this late event has a high count close to 2^32, whereas
glxDraw->lastEventSbc is closer to zero --> awire->sbc is much
greater than glXDraw->lastEventSbc.
--> We need to decrement glxDraw->eventSbcWrap by 2^32 to adjust
the current epoch back to the previous lower epoch of this late
completion event.
We assume such a wraparound to a higher (a) epoch or lower (b)
epoch has happened if awire->sbc and glxDraw->lastEventSbc differ
by more than 2^30 counts, as such a difference can only happen
on wraparound, or if somehow 2^30 present requests would be pending
for a given drawable inside the server, which is rather unlikely.
v2: Explain the reason for this patch and the new wraparound handling
much more extensive in commit message, no code change wrt. initial
version.
Cc: "10.3 10.4 10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit cc5ddd584d)
Previously PTHREAD_MUTEX_RECURSIVE_NP had been used on linux for
compatibility with old glibc. Since mesa defines __GNU_SOURCE__
on linux PTHREAD_MUTEX_RECURSIVE is also available since at least
1998. So we can unconditionally use the portable version
PTHREAD_MUTEX_RECURSIVE.
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88534
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit aead7fe2e2)
For example if width were 65, the first slice would get 96 while the
second would get 32. However the hardware appears to expect the second
pitch to be 64, based on halving the 96 (and aligning up to 32).
This fixes texelFetch piglit tests on a3xx below a certain size. Going
higher they break again, but most likely due to unrelated reasons.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 620e29b748)
We only program in one layer size per texture, so that means that all
levels must share one size. This makes the piglit test
bin/texelFetch fs sampler2DArray
have the same breakage as its non-array version instead of being
completely off, and makes
bin/ext_texture_array-gen-mipmap
start passing.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 89b26d5a36)
During 'make dist' the path of the symbolic link (x11/dri2.c) becomes
too long, and tar converts it to hard one. To make it more complicated
on Haiku tar errors out (due to lack of hardlink support) rather than
falling back to the next best thing.
So remove the symlink from git, and disable the scons x11_drm egl code.
The offending code is not build with either automake nor android.
Brian, Jose would you have any objections against this ? I was
playing around to get the symlink resolved, although I could not get the
dependency tracking resolved, so env.Command() was never executed :-\
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89680
Cc: mesa-stable@lists.freedesktop.org
Cc: Alexander von Gluck IV <kallisti5@unixzen.com>
Cc: Brian Paul <brianp@vmware.com>
Acked-by: Jose Fonseca <jfonseca@vmware.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Turns out there are scenarios where we need to insert mov's in "front"
of an input. Triggered by shaders like:
VERT
DCL IN[0]
DCL IN[1]
DCL OUT[0], POSITION
DCL OUT[1], GENERIC[9]
DCL SAMP[0]
DCL TEMP[0], LOCAL
0: MOV TEMP[0].xy, IN[1].xyyy
1: MOV TEMP[0].w, IN[1].wwww
2: TXF TEMP[0], TEMP[0], SAMP[0], 1D_ARRAY
3: MOV OUT[1], TEMP[0]
4: MOV OUT[0], IN[0]
5: END
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 27648efa20)
We may not need this for later a4xx patchlevels, but we do at least need
this for patchlevel 0. Bypass bary.f for fetching varyings when flat
shading is needed (rather than configure via cmdstream). This requires
a special dummy bary.f w/ (ei) flag to signal to scheduler when all
varyings are consumed. And requires shader variants based on rasterizer
flatshade state to handle TGSI_INTERPOLATE_COLOR.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit e9f2abe349)
Scheduled basically the same as texture (cat5) instructions, using (sy)
flag for synchronization.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 9d732d3125)
I think there is at least one more sub-encoding, but these two should be
enough to cover the common load/store instructions.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 20b50a0712)
Fixes xonotic, some webgl stuff, and really pretty much anything with
more than 4 varyings.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 51e335742e)
The piglit test glsl-fs-uniform-array-loop-unroll.shader_test was designed
to do an out of bounds access into an uniform array to make sure that we
handle that situation gracefully inside the driver, however, as Ken describes
in bug 79202, Valgrind reports that this is leading to an out-of-bounds access
in fs_visitor::demote_pull_constants().
Before accessing the pull_constant_loc array we should make sure that
the uniform we are trying to access is valid.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79202
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 6ac1bc90c4)
Nominated-by: Matt Turner <mattst88@gmail.com>
We used to loop over all color attachments, and emit FB writes for each
one, even if the shader didn't write to a corresponding output variable.
Those color attachments would be filled with garbage (undefined values).
Football Manager binds a framebuffer with 4 color attachments, but draws
to it using a shader that only writes to gl_FragData[0..2]. This meant
that color attachment 3 would be filled with garbage, resulting in
rendering artifacts. Now we skip writing to it, fixing rendering.
Writes to gl_FragColor initialize outputs[0..nr_color_regions-1] to
GRFs, while writes to gl_FragData[i] initialize outputs[i].
Thanks to Jason Ekstrand for tracking this down.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86747
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit e95969cd95)
Conflicts:
src/mesa/drivers/dri/i965/brw_fs_visitor.cpp
Previously, we emitted the shader-time epilogue from emit_fb_writes(),
during the middle of looping through color regions (or emit_urb_writes
for the VS). This is duplicated several times and rather awkward.
I need to fix a bug in our FB write handling, and it will be a lot
easier if we move emit_shader_time_end() out of there.
Now, we simply emit FB writes/URB writes, and subsequently have
emit_shader_time_end() insert instructions before the final SEND with
EOT. Not only is this simpler, it's actually a slight improvement:
we now include the MOVs to set up the final FB write payload in our
shader-time measurements.
Note that INTEL_DEBUG=shader_time only exists on Gen7+, and uses
send-from-GRF. (In the past, we might have hit trouble where both
attempt to use MRFs for messages; that's not a problem now.)
v2: Rebase on v3 of the previous patch and other shader_time fixes.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com> [v1]
Acked-by: Matt Turner <mattst88@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 4ebeb71573)
Conflicts:
src/mesa/drivers/dri/i965/brw_fs.cpp
This makes another part of the INTEL_DEBUG=shader_time code emittable
at arbitrary locations, rather than just at the end of the instruction
stream.
v2: Don't lose smear! Caught by Topi Pohjolainen.
v3: Don't set smear on the destination of the MOV. Thanks Topi!
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit e43af8d09f)
Instead of emit_shader_time_write, we now do emit(SHADER_TIME_ADD(...)).
The advantage is that we can also insert a shader time write at an
arbitrary location in the instruction stream, rather than being
restricted to emitting at the end.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit bea854c7f3)
The ADD(diff, diff, fs_reg(-2u)) instruction reads diff, which is a
width 1 register. We need to read it as <0,1,0> with a subreg of 0,
which is what smear accomplishes.
Fixes assertion:
brw_eu_emit.c:285: validate_reg: Assertion `hstride == 0' failed.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86974
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit f1adc45dbe)
Conflicts:
src/mesa/drivers/dri/i965/brw_fs.cpp
This fixes the GL_COMPRESSED_RED_RGTC1 part of piglit's rgtc-teximage-01
test as well as the precision part of Wine's 3dc format test (fd.o bug
89156).
The Z component seems to contain a lower precision version of the
result, probably a temporary value from the decompression computation.
The Y and W component contain different data that depends on the input
values as well, but I could not make sense of them (Not that I tried
very hard).
GL_COMPRESSED_SIGNED_RED_RGTC1 still seems to have precision problems in
piglit, and both formats are affected by a compiler bug if they're
sampled by the shader with a swizzle other than .xyzw. Wine uses .xxxx,
which returns random garbage.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89156
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Cc: 10.5 10.4 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f710b99071)
Was resulting in gl_PointSize write being optimized out, causing
particle system type shaders to hang if hw binning enabled.
Fixes neverball, OGLES2ParticleSystem, etc.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 60096ed906)
Piglit's spec/glsl-1.20/compiler/structure-and-array-operations/
array-selection.vert test contains the following code:
gl_Position = (pick_from_a_or_b ? a : b)[i];
where "a" and "b" are uniform vec4[2] variables.
ast_to_hir creates a temporary vec4[2] variable, conditional_tmp, and
generates an if-block to copy one or the other:
(declare (temporary) (array vec4 2) conditional_tmp)
(if (var_ref pick_from_a_or_b)
((assign () (var_ref conditional_tmp) (var_ref a)))
((assign () (var_ref conditional_tmp) (var_ref b))))
However, we failed to update max_array_access for "a" and "b", so it
remained 0 - here, the whole array is being accessed. At link time,
update_array_sizes() used this bogus information to change the types
of "a" and "b" to vec4[1]. We then had assignments from a vec4[1] to
a vec4[2], which is highly illegal.
This tripped assertions in nir_split_var_copies with scalar VS.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 9f1e250e77)
The yoffset needs to be interpreted as a slice offset for 1D array
textures. This patch implements that by moving the yoffset into
zoffset similar to how it moves the height into depth.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 7286a68991)
Now that a layered source PBO is interpreted as a single tall 2D image
it's quite easy to accept the image height packing option by just
creating an image that is tall enough to include the image padding.
I'm not sure whether the image height property should affect 1D_ARRAY
textures. My intuition and interpretation of the GL spec (which is a
bit vague) would be that it shouldn't. However the software fallback
path in Mesa uses the property for packing but not for unpacking. The
binary NVidia driver uses it for both. This patch doesn't use it for
either case so it is different from the software fallback. There is
some discussion about this here:
http://lists.freedesktop.org/archives/mesa-dev/2015-February/077925.html
This is tested by the texsubimage Piglit test with the array and pbo
arguments. Previously this test was skipping this code path because it
always sets the image height.
I've also tested it by modifying the getteximage-targets test. It
wasn't using this code path before because it was using the default
texture object so this code couldn't successfully create a frame
buffer. I also modified it to add some image padding with the image
height in the PBO.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit a08bff1e98)
This reverts commit 546aba143d.
I think the changes to the calls to glBlitFramebuffer from this patch
are no different to what it was doing previously because it used to
set height to 1 before doing the blits. However it was introducing
some problems with the blit for layer 0 because this was no longer
special cased. It didn't fix problems with the yoffset which needs to
be interpreted as a slice offset. I think a better solution would be
to modify the original if statement to cope with the yoffset.
Conflicts:
src/mesa/drivers/common/meta_tex_subimage.c
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
(cherry picked from commit 7d10d2feee)
A layered PBO image is now interpreted as a single tall 2D image so
the z argument in _mesa_meta_bind_fbo_image is ignored. Therefore this
was just redundantly rebinding the same image repeatedly.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
(cherry picked from commit a44606eb81)
This fixes a dEQP test failure. In the test,
glCopyTexSubImage2D was called with target = 0 and failed to throw
INVALID ENUM. This failure was caused by _mesa_get_current_tex_object(ctx,
target) being called before the target checking. To remedy this, target
checking was separated from the main error-checking function and
called prior to _mesa_get_current_tex_object.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89312
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit ca65764d60)
This fixes a dEQP test failure. In the test,
glCompressedTexSubImage2D was called with target = 0 and failed to throw
INVALID ENUM. This failure was caused by _mesa_get_current_tex_object(ctx,
target) being called before the target checking. To remedy this, target
checking was made into its own function and called prior to
_mesa_get_current_tex_object.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89311
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit 549078cb5a)
Correctly set _BaseFormat field when creating a gl_renderbuffer
with EGLImage storage.
Change-Id: I8c9f7302d18b617f54fa68304d8ffee087ed8a77
Signed-off-by: Frank Henigman <fjhenigman@google.com>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Reviewed-by: Chad Versace <chad.versace@intel.com>
(cherry picked from commit e43729943e)
Nominated-by: Chad Versace <chad.versace@intel.com>
The shader-cache isn't finished, so the configure checks are a bit
premature and will only stand to confuse users of Mesa 10.5.0.
This is a squash of the follow four reverts:
Revert "Rename sha1.c and sha1.h to mesa-sha1.c and mesa-sha1.h"
Revert "configure: Add machinery for --enable-shader-cache (and --disable-shader-cache)"
Revert "sha1: Fix gcry_md_hd_t typo."
Revert "mesa: Add mesa SHA-1 functions"
Reviewed-by: Carl Worth <cworth@cworth.org>
A while back I switched intel_blit_framebuffer to prefer Meta over the
BLT. This meant that Gen8 platforms would start using the 3D engine
for blits, just like we do on Gen6-7.5.
However, I hadn't considered Gen4-5 when making that change. The BLT
engine appears to be substantially faster on 965GM than using Meta to
drive the 3D engine. This isn't too surprising: original Gen4 doesn't
support tile offsets (that came on G45), and the level/layer fields
don't work for cubemap rendering, so for inconvenient miplevel
alignments, we end up blitting or copying data to/from temporaries
in order to render to it. We may as well just use the blitter.
I chose to use the BLT on Gen4-5 because they use the same ring for
both 3D and BLT; Gen6+ splits it out.
Fixes regressions on 965GM due to botched tile offset code (we should
fix those properly as well, but they're longstanding bugs - for now,
put things back to the status quo).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89430
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit aa0705c06c)
The SSSE3 swizzling code was written for fast uploads to the GPU and
assumed the destination was always 16-byte aligned. When we began using
this code for fast downloads as well we didn't do anything to account
for the fact that the destination pointer given by glReadPixels() or
glGetTexImage() is not guaranteed to be suitably aligned.
With SSSE3 enabled (at compile-time), some applications would crash when
an SSE aligned-store instruction tried to store to an unaligned
destination (or an assertion that the destination is aligned would
trigger).
To remedy this, tell intel_get_memcpy() whether we're uploading or
downloading so that it can select whether to assume the destination or
source is aligned, respectively.
Cc: 10.5 <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89416
Tested-by: Uriy Zhuravlev <stalkerg@gmail.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
(cherry picked from commit 2e4c95dfe2)
With the split of the gallium egl module we had previously it required
access to some of the internal functions. As the only build (automake)
that did this no longer builds it we can now appropriately hide those
functions.
Cc: 10.5 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit dd438ae34b)
Since commit 28f3f8d, indices generator take a start parameter. However, some
index values have been left to start at 0.
This fixes the glean/fbo test with the virgl driver, and copytexsubimage
with freedreno.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 073a5d2e84)
This is a fix for a regression introduced in commit a9f8296d ("i965/fs:
Preserve the CFG in a few more places.").
The errata this code works around is described in a comment before the function:
"[DevBW, DevCL] Errata: A destination register from a send can not be
used as a destination register until after it has been sourced by an
instruction with a different destination register.
The framebuffer write's sources must be in message registers, which SEND
instructions cannot have as a destination. There's no way for this
errata to affect anything at the end of the program. Just remove the
code.
Cc: 10.4, 10.5 <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84613
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit e214000f25)
Previously, there were bugs where if the app set a scissor it could affect
the area of the texture that was downloaded. There was also potential that
the framebuffer SRGB state could affect downloads. This ensures that those
will get saved/restored and can't affect the texture download.
Cc: 10.5 <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89292
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit b1ab02d9c0)
Previously, we compared our new GS-out VUE map to the existing *VS*-out
VUE map, which is bogus.
This would mostly manifest as redundant dirty flagging where the GS is
in use but the VS and GS output layouts differ; but there is a scary
case where we would fail to flag a GS-out layout change if it happened
to match the VS-out layout.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Cc: "10.5, 10.4" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88885
(cherry picked from commit b51ff50a76)
The header is included in ../xmlpool.h. With the latter of which used
directly in a number of places in mesa.
Note that we can also add it (alongside t_option.h) to noinst_HEADERS,
but neither solution fixes the issue that brough us here - namely:
Do not regenerate the headers, if it already exists.
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
I.e. add shared-glapi/glapi_mapi_tmp.h to the SOURCES list. Otherwise
there will be no knowledge that the file is required by others for the
build. Thus autotools won't pick it up for the distribution tarball.
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Some of the files generated were not in the SOURCES variable, thus
although generated prior to compilation the dependency tracking was
incomplete. The latter of which resulted in the files missing from the
distribution tarball.
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The file is auto-generated, and #included by formats.c. Let's rename it
to reflect the latter. This will also help up fix the dependency
tracking by adding it to the _SOURCES variable, without the side effect
of it being compiled (twice).
Cc: "10.4, 10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The length argument passed to sysctl was the size of the pointer
not the type. The result of this is sysctl calls would fail on
32 bit BSD/Mac OS X.
Additionally the wrong pointer was passed as an argument to store
the result of the sysctl call.
Cc: "10.4, 10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 7983a3d2e0)
When we schedule an instructions with undefined value, we
eventually will use 0, which is a constant, however sb wasn't
taking this into account and creating ops with illegal scalar
swizzles.
this replaces my fix for op3 in t slots.
Reviewed-by: Glenn Kennard <glenn.kennard@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit e8e4437ed0)
Skylake+ doesn't support setting a depth buffer to a 1D surface but it
does allow pretending it's a 2D texture with a height of 1 instead.
This fixes the GL_DEPTH_COMPONENT_* tests of the copyteximage piglit
test (and also seems to avoid a subsequent GPU hang).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89037
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 5b29b2922a)
Nominated-by: Ian Romanick <idr@freedesktop.org>
There were some bugs, and the code was really difficult to follow. We
would optimize
min(max(x, b), 1.0) into max(sat(x), b)
but not pay attention to the order of min/max and also do
max(min(x, b), 1.0) into max(sat(x), b)
Corrects four shaders from Champions of Regnum that do
min(max(x, 1), 10)
and corrects rendering of Mass Effect under VMware Workstation.
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89180
Reviewed-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit cb25087c7b)
If the renderer supports the core profile the query returned incorrectly
0x8 as value, because it was using (1U << __DRI_API_OPENGL_CORE) for the
returned value.
The same happened with the compatibility profile. It returned 0x1
(1U << __DRI_API_OPENGL) instead of 0x2.
Internal DRI defines:
dri_interface.h: #define __DRI_API_OPENGL 0
dri_interface.h: #define __DRI_API_OPENGL_CORE 3
Those two bits are supposed for internal usage only and should be
translated to GLX_CONTEXT_CORE_PROFILE_BIT_ARB (0x1) for a preferred
core context profile and GLX_CONTEXT_COMPATIBILITY_PROFILE_BIT_ARB (0x2)
for a preferred compatibility context profile.
This patch implements the above translation in the glx module.
v2: Fix the incorrect behavior in the glx module
Cc: "10.3 10.4 10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 6d164f65c5)
Corrects the way that _mesa_meta_pbo_TexSubImage and
_mesa_meta_pbo_GetTexSubImage handle 1D_ARRAY textures. Fixes a failure in
the Piglit arb_direct_state_access/gettextureimage-targets test.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Tested-by: Laura Ekstrand <laura@jlekstrand.net>
Cc: "10.4, 10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 546aba143d)
Changes PBO uploads and downloads to use a tall (height * depth) 2D texture
for blitting. This fixes the bug where 2D_ARRAY, 3D, and CUBE_MAP_ARRAY
textures are not properly uploaded and downloaded.
Removes the option to use a 2D ARRAY texture for the PBO during upload and
download. This option didn't work because the miptree couldn't be set up
reliably.
v2: Review from Jason Ekstrand and Neil Roberts:
-Delete the depth parameter from create_texture_for_pbo
-Abandon the option to create a 2D ARRAY texture in create_texture_for_pbo
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: "10.4, 10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit ccc5ce6f72)
This moves the line setting immutability for the texture to after
_mesa_initialize_texture_object so that the initializer function will not
cancel it out. Moreover, because of the ARB_texture_view extension, immutable
textures must have NumLayers > 0, or depth will equal (0-1)=0xFFFFFFFF during
SURFACE_STATE setup, which triggers assertions.
v2: Review from Kenneth Graunke:
- Include more explanation in the commit message.
- Make texture setup bug fixes into a separate patch.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: "10.4, 10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 06084652fe)
poc counter should be reset with IDR frame,
otherwise there would be a re-order issue with
frames before and after IDR
v2: add commit message
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 9c7b343bc0)
With earlier commit (install-lib-links: don't depend on .libs directory)
we moved the location of the file from .libs/ to the current dir.
Although we did not attribute that in the former case autotools was
doing us a favour and removing the file. Explicitly remove the file at
clean-local time, otherwise we'll end up with dangling files.
Cc: "10.3 10.4 10.5" <mesa-stable@lists.freedesktop.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit fece147be5)
The zoffset and depth values were not being considered when calling
error_check_subtexture_dimensions().
Fixes 2 dEQP tests:
* dEQP-GLES3.functional.negative_api.texture.texsubimage3d_neg_offset
* dEQP-GLES3.functional.negative_api.texture.texsubimage3d_invalid_offset
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "10.4 10.5" <mesa-stable@lists.freedestkop.org>
(cherry picked from commit 2aa71e9485)
In current code, color format is always hardcoded to
__DRI_IMAGE_FORMAT_ARGB8888 when buffer or DRI image is
allocated in function calls, get_back_bo and dri2_get_buffers,
regardless of current target's color format. This problem
may leads to incorrect render pitch calculation, which
eventually ends up with wrong offset of pixels in
the frame buffer when the image is in different color format
from dri surf's, especially with different bpp. (e.g. RGB565-16bpp)
Attached code patch simply adds RGB565 and XRGB8888 cases to two
functions noted above to resolve the issue.
v2: added a case of XRGB8888, format and bpp selection is done
via switch-case (not "if-else" anymore)
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 1e96eece30)
The saturate propagation pass recognizes that the second instruction
below does not interfere with an attempt to propagate the saturate
modifier from instruction 3 to 1.
1: add(8) dst0 src0 src1
2: mov.sat(8) dst1 dst0
3: mov.sat(8) dst2 dst0
Unfortunately, we did not consider the case of instruction 2 having a
source modifier on dst0. Take for instance:
1: add(8) dst0 src0 src1
2: mov.sat(8) dst1 -dst0
3: mov.sat(8) dst2 dst0
Consider such an instruction to interfere. Increase instruction counts
in Anomaly 2, which could be a bug fix depending on the values the first
instruction produces.
instructions in affected programs: 53228 -> 53934 (1.33%)
HURT: 360
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 7f8dd91d16)
Use pipe_sampler_view_reference() instead of ordinary assignment.
Also add a new sanity check assertion.
Fixes piglit gl-1.0-drawpixels-color-index test crash. But note
that the test still fails.
Cc: "10.4, 10.5" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
(cherry picked from commit 62a8883f32)
This snippet can be included in Makefiles that may, depending on the
project configuration, not actually build any installable libraries.
In that case we don't have anything to depend on and this part of
the makefile may be executed before the .libs directory is created,
so do not depend on it being there.
Cc: "10.3 10.4 10.5" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
(cherry picked from commit 5c1aac17ad)
With commit c39dbfdd0f7(auxiliary/vl: bring back the VL code for the dri
targets) we did not fully consider users of dri-swrast alone. Thus we
ended up trying to compile the dri2 specific code on platform which lack
it - Cygwin for example.
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
Reported-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
(cherry picked from commit dd7b6670a2)
Currently we use DISTCHECK_CONFIGURE_FLAGS, which is reserved for
the user. As with other variables, one should use the AM_ variable
within the makefile.
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 3018c4a56a)
There's some debate about whether we should use Meta or BLORP,
but either should run circles around the BLT engine.
In particular, this means that Gen8+ will use the 3D engine for blits,
like we do on Gen6-7.
Improves performance in "copypixrate -blit -back" (from Mesa demos)
by 232.037% +/- 3.15795% (n=10) on Broadwell GT3e.
v2: Rebase on Laura's changes.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit d523fefa75)
The macro is defined to provide a trailing ; so this caused the expansion
to end in ";;" which made the Solaris Studio compilers issue warnings for
every line of:
"builtin_type_macros.h", line 113: Warning: extra ";" ignored.
for every file that included the header, filling build logs with thousands
of useless warnings.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 815b3bd096)
opt_copy_propagation and opt_copy_propagation_elements create new ACP
and Kill sets each time they enter a new control flow block. For if
blocks, they also copy the entire existing ACP set contents into the
new set.
When we exit the control flow block, we discard the new sets. However,
we weren't freeing them - so they lived on until the pass finished.
This can waste a lot of memory (57MB on one pessimal shader).
This patch makes the pass allocate ACP entries using this->acp as the
memory context, and Kill entries out of this->kill. It also steals
kill entries when moving them from the inner kill list to the parent.
It then frees the lists, including their contents.
v2: Move ralloc_free(this->acp) just before this->acp = orig_acp
(suggested by Eric Anholt).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "10.5 10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 76960a55e6)
Previously array textures were not working with GetCompressedTextureImage,
leading to failures in the test
arb_direct_state_access/getcompressedtextureimage.c.
Tested-by: Laura Ekstrand <laura@jlekstrand.net>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: "10.4, 10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 92163482bd)
+ minor indentation fixes
Discovered by Axel Davy.
This can't be reproduced with any app, because all state trackers set a DSA
state first.
Cc: 10.5 10.4 10.3 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
(cherry picked from commit 2ead74888a)
When restoring the current state in _mesa_meta_end it was previously trying to
copy the on-going sample count of the current occlusion query into the new
query after restarting it so that the driver will continue adding to the
previous value. This wouldn't work for two reasons. Firstly, the query might
not be ready yet so the Result member will usually be zero. Secondly the saved
query is stored as a pointer to the query object, not a copy of the struct, so
it is actually restarting the exact same object. Copying the result value is
just copying between identical addresses with no effect. The call to
_mesa_BeginQuery will have always reset it back to zero.
This patch fixes it by making it actually wait for the query object to be
ready before grabbing the previous result. The downside of doing this is that
it could introduce a stall but I think this situation is unlikely so it might
not matter too much. A better solution might be to introduce a real
suspend/resume mechanism to the driver interface. This could be implemented in
the i965 driver by saving the depth count multiple times like it does in the
i945 driver.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88248
Reviewed-by: Carl Worth <cworth@cworth.org>
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit bb77745681)
Some old format conversion code in pack.c implemented byte-swapping like this:
GLint comps = _mesa_components_in_format(dstFormat);
GLint swapSize = _mesa_sizeof_packed_type(dstType);
if (swapSize == 2)
_mesa_swap2((GLushort *) dstAddr, n * comps);
else if (swapSize == 4)
_mesa_swap4((GLuint *) dstAddr, n * comps);
where n is the pixel count. But this is incorrect for packed formats,
where _mesa_sizeof_packed_type is already returning the size of a pixel
instead of the size of a single component, so multiplying this by the
number of components in the format results in a larger element count
for _mesa_swap than we want.
Unfortunately, we followed the same implementation for byte-swapping
in the rewrite of the format conversion code for texstore, readpixels
and texgetimage.
This patch computes the correct element counts for _mesa_swap calls
by computing the bytes per pixel in the image and dividing that by the
swap size to obtain the number of swaps required per pixel. Then multiplies
that by the number of pixels in the image to obtain the swap count that
we need to use.
Also, when handling byte-swapping in texstore_rgba, we were ignoring
the image's depth. This patch fixes this too.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit ba426522dd)
... instead of emit(BRW_OPCODE_CMP, ...). In commit 6b3a301f I changed
vec4_visitor::CMP to set the destination's type to that of src0. In the
following commit (2335153f) I removed an apparently now unnecessary work
around for Gen8 that did the same thing.
But there was a single place that emitted a CMP instruction without
using the vec4_visitor::CMP function. Use it there.
And change dst_null_d to dst_null_f for good measure, since ARB vp
doesn't have integers.
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89032
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 72b9f8db2a)
If a transform feedback buffer's size is 0, st_bufferobj_data doesn't
end up creating a buffer for it. There's no point in trying to write to
such a buffer, so just pretend as if it's not really there.
This fixes arb_gpu_shader5-xfb-streams-without-invocations on nvc0.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 80d373ed5b)
Current implementation allowed usage of unsized type texture GL_FLOAT
and GL_HALF_FLOAT as a render target as this was 'expected behavior' by
WEBGL_oes_texture_float and is also allowed by the oes-texture-float
WebGL test. However this broke some ES3 conformance tests that do not
accept such behavior. Patch sets such an fbo incomplete as expected by
the ES3 conformance tests. Textures with sized types like RGBA32F will
still continue to work as render targets.
v2: code style cleanups (Ian Romanick, Matt Turner)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88905
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit e333035c47)
Commit f82f2fb3dc added use of the Mesa
IR optimizer for both ARB_fragment_program and ARB_vertex_program, but
only justified the vertex-program portions with measured performance
improvements.
Meanwhile, the optimizer was seen to generate hundreds of unused
immediates without discarding them, causing failures.
Discard the use of the optimizer for now to fix the regression. (In
the future, we anticpate things moving from Mesa IR to NIR for better
optimization anyway.)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82477
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
CC: "10.3 10.4 10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 55a57834bf)
The hardware's integer luminance formats are completely unusable;
currently we fall back to RGBA. This means we need to override
the texture swizzle to obtain the XXX1 values expected for luminance
formats.
Fixes spec/EXT_texture_integer/texwrap formats bordercolor [swizzled]
on Broadwell - 100% of border color tests now pass on Broadwell.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 8cb18760cc)
With commit c642e87d9f4(auxiliary/vl: rework the build of the VL code)
we split out the VL code into a separate static library that was meant
to be used by the VL targets alone - va, vdpau, xvmc.
The commit failed to consider the way we handle vdpau-gl interop and
broke it. Bring back the functionality by keeping the vl <> vl_stub
separation as requrested by Christian.
v2: Update the omx target as well. Update mesa-stable email address.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86837
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Andy Furniss <adf.lists@gmail.com>
Currently having the wayland-scanner is optional, which causes problems
when autotools parses through the makefiles, and tries to generate all
the BUILT_SOURCES.
As the config option --with-egl-platform=wayland is not the default, we
won't end up setting the WAYLAND_SCANNER variable, which in turn will
cause some files to not get generated.
There has been a wayland-scanner package as of wayland 1.2 which
provides a variable for the scanner binary, so let's use that one and
fall back to manually searching via AC_PATH_PROG when needed.
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Use nir/nir_opcodes.h as is (w/o the absolute path), as it is the target
name used to generate the actual file. Otherwise the target is missing,
the file won't get generated and the build will fail.
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
To fix build when libdrm is not found,
commit a594cec7e3 did put several
parts of egl code under #ifdef HAVE_DRM_PLATFORM.
HAVE_DRM_PLATFORM means the egl drm platform is being built.
What should have been used instead is HAVE_LIBDRM.
At a few locations, the HAVE_DRM_PLATFORM introduced
have already been replaced by HAVE_LIBDRM, this patch
replaces the remaining occurences.
This patch makes for example EGL_EXT_image_dma_buf_import
be advertised by egl under x11 when the drm egl platform
is not built, whereas previously it required the drm egl
platform to be built.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
xfont.c:237:14: error: implicit declaration of function 'GetGLXDRIDrawable' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
glxdraw = GetGLXDRIDrawable(CC->currentDpy, CC->currentDrawable);
^
Fixes regression from 291be28476
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
(cherry picked from commit e68b67b53f)
../../../src/mesa/main/compiler.h:47:10: fatal error: 'util/macros.h' file not found
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
(cherry picked from commit 1c67a5687a)
2015-02-10 20:35:24 -08:00
224 changed files with 3431 additions and 1544 deletions
@@ -55,7 +56,150 @@ Note: some of the new features are only available with certain drivers.
<h2>Bug fixes</h2>
TBD.
<p>This list is likely incomplete.</p>
<ul>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=10370">Bug 10370</a> - Incorrect pixels read back if draw bitmap texture through Display list</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=60879">Bug 60879</a> - [radeonsi] X11 can't start with acceleration enabled</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=67672">Bug 67672</a> - [llvmpipe] lp_test_arit fails on old CPUs</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=77544">Bug 77544</a> - i965: Try to use LINE instructions to perform MAD with immediate arguments</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=83510">Bug 83510</a> - Graphical glitches in Unreal Engine 4</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=83908">Bug 83908</a> - [i965] Incorrect icon colors in Steam Big Picture</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=84212">Bug 84212</a> - [BSW]ES3-CTS.shaders.loops.do_while_dynamic_iterations.vector_counter_vertex fails and causes GPU hang</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=84651">Bug 84651</a> - Distorted graphics or black window when running Battle.net app on Intel hardware via wine</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=86837">Bug 86837</a> - kodi segfault since auxiliary/vl: rework the build of the VL code</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=86939">Bug 86939</a> - test_vf_float_conversions.cpp:63:12: error: expected primary-expression before ‘union’</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=86944">Bug 86944</a> - glsl_parser_extras.cpp", line 1455: Error: Badly formed expression. (Oracle Studio)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=86958">Bug 86958</a> - lp_bld_misc.cpp:503:40: error: no matching function for call to ‘llvm::EngineBuilder::setMCJITMemoryManager(ShaderMemoryManager*&)’</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=86969">Bug 86969</a> - _drm_intel_gem_bo_references() function takes half the CPU with Witcher2 game</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=87076">Bug 87076</a> - Dead Island needs allow_glsl_extension_directive_midshader</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=87619">Bug 87619</a> - Changes to state such as render targets change fragment shader without marking it dirty.</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=87658">Bug 87658</a> - [llvmpipe] SEGV in sse2_has_daz on ancient Pentium4-M</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=87694">Bug 87694</a> - [SNB] Crash in brw_begin_transform_feedback</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=87886">Bug 87886</a> - constant fps drops with Intel and Radeon</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=87913">Bug 87913</a> - CPU cacheline size of 0 can be returned by CPUID leaf 0x80000006 in some virtual machines</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=88079">Bug 88079</a> - dEQP-GLES3.functional.fbo.completeness.renderable.renderbuffer.color0 tests fail due to enabling of GL_RGB and GL_RGBA</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=88219">Bug 88219</a> - include/c11/threads_posix.h:197: undefined reference to `pthread_mutex_lock'</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=88227">Bug 88227</a> - Radeonsi: High GTT usage in Prison Architect large map</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=88248">Bug 88248</a> - Calling glClear while there is an occlusion query in progress messes up the results</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=88467">Bug 88467</a> - nir.c:140: error: ‘nir_src’ has no member named ‘ssa’</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=88478">Bug 88478</a> - #error "<malloc.h> has been replaced by <stdlib.h>"</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=88519">Bug 88519</a> - sha1.c:210:22: error: 'grcy_md_hd_t' undeclared (first use in this function)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=88523">Bug 88523</a> - sha1.c:37: error: 'SHA1_CTX' undeclared (first use in this function)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=88561">Bug 88561</a> - [radeonsi][regression,bisected] Depth test/buffer issues in Portal</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=88658">Bug 88658</a> - (bisected) Slow video playback on Kabini</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=88662">Bug 88662</a> - unaligned access to gl_dlist_node</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=88783">Bug 88783</a> - FTBFS: Clover: src/gallium/state_trackers/clover/llvm/invocation.cpp:335:49: error: no matching function for call to 'llvm::TargetLibraryInfo::TargetLibraryInfo(llvm::Triple)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=88806">Bug 88806</a> - nir/nir_constant_expressions.c:2754:15: error: controlling expression type 'unsigned int' not compatible with any generic association type</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=88930">Bug 88930</a> - [osmesa] osbuffer->textures should be indexed by attachment type</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=88962">Bug 88962</a> - [osmesa] Crash on postprocessing if z buffer is NULL</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=89068">Bug 89068</a> - glTexImage2D regression by texstore_rgba switch to _mesa_format_convert</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=89069">Bug 89069</a> - Lack of grass in The Talos Principle on radeonsi (native\wine\nine)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=89180">Bug 89180</a> - [IVB regression] Rendering issues in Mass Effect through VMware Workstation</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=79202">Bug 79202</a> - valgrind errors in glsl-fs-uniform-array-loop-unroll.shader_test; random code generation</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=86747">Bug 86747</a> - Noise in Football Manager 2014 textures</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=86974">Bug 86974</a> - INTEL_DEBUG=shader_time always asserts in fs_generator::generate_code() when Mesa is built with --enable-debug (= with asserts)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=88246">Bug 88246</a> - Commit 2881b12 causes 43 DrawElements test regressions</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=88883">Bug 88883</a> - ir-a2xx.c: variable changed in assert statement</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=88885">Bug 88885</a> - Transform feedback uses incorrect interleaving if a previous draw did not write gl_Position</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=89156">Bug 89156</a> - r300g: GL_COMPRESSED_RED_RGTC1 / ATI1N support broken</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=89224">Bug 89224</a> - Incorrect rendering of Unigine Valley running in VM on VMware Workstation</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=89292">Bug 89292</a> - [regression,bisected] incomplete screenshots in some cases</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=69226">Bug 69226</a> - Cannot enable basic shaders with Second Life aborts attempt</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=71591">Bug 71591</a> - Second Life shaders fail to compile (extension declared in middle of shader)</li>
Mesa 10.5.5 is a bug fix release which fixes bugs found since the 10.5.4 release.
</p>
<p>
Mesa 10.5.5 implements the OpenGL 3.3 API, but the version reported by
glGetString(GL_VERSION) or glGetIntegerv(GL_MAJOR_VERSION) /
glGetIntegerv(GL_MINOR_VERSION) depends on the particular driver being used.
Some drivers don't support all the features required in OpenGL 3.3. OpenGL
3.3 is <strong>only</strong> available if requested at context creation
because compatibility contexts are not supported.
</p>
<h2>SHA256 checksums</h2>
<pre>
TBD
</pre>
<h2>New features</h2>
<p>None</p>
<h2>Bug fixes</h2>
<p>This list is likely incomplete.</p>
<ul>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=88521">Bug 88521</a> - GLBenchmark 2.7 TRex renders with artifacts on Gen8 with !UXA</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=89455">Bug 89455</a> - [NVC0/Gallium] Unigine Heaven black and white boxes</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=89689">Bug 89689</a> - [Regression] Weston on DRM backend won't start with new version of mesa</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=90130">Bug 90130</a> - gl_PrimitiveId seems to reset at 340</li>
</ul>
<h2>Changes</h2>
<p>Boyan Ding (1):</p>
<ul>
<li>i965: Add XRGB8888 format to intel_screen_make_configs</li>
</ul>
<p>Emil Velikov (3):</p>
<ul>
<li>docs: Add sha256 sums for the 10.5.4 release</li>
<li>r300: do not link against libdrm_intel</li>
<li>Update version to 10.5.5</li>
</ul>
<p>Ilia Mirkin (4):</p>
<ul>
<li>nvc0/ir: flush denorms to zero in non-compute shaders</li>
<li>gk110/ir: fix set with a register dest to not auto-set the abs flag</li>
<li>nvc0/ir: fix predicated PFETCH emission</li>
<li>nv50/ir: fix asFlow() const helper for OP_JOIN</li>
</ul>
<p>Kenneth Graunke (2):</p>
<ul>
<li>i965: Make intel_emit_linear_blit handle Gen8+ alignment restrictions.</li>
<li>i965: Disallow linear blits that are not cacheline aligned.</li>
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
