When the client calls vkMapMemory(), we have to align the requested
offset down to the nearest page or else the map will fail. On platforms
where we have DRM_IOCTL_I915_GEM_MMAP_OFFSET, we always map the whole
buffer. In either case, the original map may start before the requested
offset and we need to take that into account when we clflush.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13610>
(cherry picked from commit 90ac06e502)
We have to mark the root as non-spillable in case the interval is the
child of some other interval, but we can't know whether it's the child
of some other interval until it's been inserted. Move the setting of
cant_spill below the insertion. This prevents us from using a bogus
parent value.
Fixes: 613eaac7b5 ("ir3: Initial support for spilling non-shared registers")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13650>
(cherry picked from commit db566904ba)
Rather than having 2 paths to set the slice/subslice/eu masks, reuse
the other internal functions. This simplifies finding bugs within this
code :
* If we have i915 query topology support, update_from_topology() is
called.
* If we don't have query topology support but we have getparam for
slice/subslice/EU, we generate a topology data and call
update_from_topology()
* If we have no kernel support to query any kind of topology, we
generate the values return by the kernel for slice/subslice/EU and
call update_from_masks() which in turns calls
update_from_topology()
v2: Fixup typo (Adam)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10015>
(cherry picked from commit e10c641f00)
10c75ae4 moved handling of this state to the functions that
depend on ctx->_ImageTransferState.
So we can't depend on _NEW_PIXEL being set to call this function,
since it'll be always clear earlier by _mesa_update_state_locked.
Example sequence that would trigger the issue:
glPixelTransferi(...)
glClear(...)
glTexSubImage2D(...) <-- won't use the new value set by
glPixelTransferi because glClear caused
_NEW_PIXEL to be cleared.
_NEW_PIXEL itself is kept because st_update_pixel_transfer depends
on it.
Fixes: 10c75ae4 ("mesa: move _mesa_update_pixel out of _mesa_update_state")
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5273
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13596>
(cherry picked from commit 1ee3fbd703)
this ended up being a little trickier than I thought; lazy
descriptors don't use dynamic ubo types for the push set,
which means drivers that (correctly) assert dynamic offset existence
explode because the descriptor template will never work with the
push set
the better, though slightly more annoying, option here is to use the
lazy manager's faster descriptor allocation and lesser complexity to
quickly grab a push set, then tweak the existing cached codepath slightly
in order to update a raw vkdescriptorset
Fixes: 417477f60e ("zink: always use lazy (non-push) updating for fbfetch descriptors")
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13677>
(cherry picked from commit 8c37cd8860)
We have to set 8c01 to say "leave these channels alone" when
clearing/storing just Z or S of z24s8. Fixes the bypass path for
KHR-GLES3.packed_depth_stencil.verify_read_pixels.depth24_stencil8.
Cc: mesa-stable
Fixes: #5592
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13659>
(cherry picked from commit f0f5b8d47c)
The gmem store stores both depth and stencil for z24s8. So, if we're
doing a write (clear or draw) to one or the other of the channels, we need
the other one restored as well.
Cc: mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13649>
(cherry picked from commit 29093bc42d)
At that point we didn't call all the v3dv lowerings. So the reference
nir shader used to call the v3d compiler could be different.
Note that at that point the nir shader is only available for internal
shaders (like gs multiview).
This specifically affected multiview tests that wrote gl_PointSize, as
the nir shader for the geometry shader were wrongly exposing
per_vertex_point_size as false, as we were basing our check on the
nir_shader_info, and that was gathered calling nir_shader_gather_info
at pipeline_lower_nir.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13325>
(cherry picked from commit 19894bec1f)
OpenGL 3.0 requires the driver can draw to 8 simultaneous render
targets. Similarly, OpenGL ES 3.0 requires the driver can draw to 4
simultaneous render targets. Fix the version computation logic to take
this into account.
On Mali T720, we support ~all features of OpenGL ES 3.1 except we only
support a single render target. Mali T720 should advertise OpenGL 2.1
and OpenGL ES 2.0 only. With the previous logic, it incorrectly
advertised OpenGL ES 3.1.
v2: Lie about the minimum for GL 3.0 to make freedreno a3xx happy. Add
Emma's reviewed-by.
v3: Update the Mali T720 CI expectations. There are tests that pass on
GLES3 but not GLES2. Unclear if these are dEQP bugs or Mesa bugs, lima
hits the same issues. Add them to the known fails
Note to mesa-stable maintainers: this downgrades the OpenGL version
advertised on Mali T720. As such, this patch should apply to the
unreleased 21.3 (Eric) but should NOT be backported to any released Mesa
versions (21.2 or older should NOT have this patch). This is a bit of a
compromise; Emma agreed with this plan on IRC.
Reported-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net> [v2]
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu> [v2]
Cc: 21.3 mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13455>
(cherry picked from commit 861a35b3bc)
* Update Kconfig for x86_64 and ARM64. Follow the dependency tree of the
kernel modules to make sure that the intended configurations are being
set. Check scripts/merge_config.sh output as well to see if there is
a requested Kconfig not being considered.
For a630 devices:
* Use kernel version with a6xx workaround for frequency scaling
* Enable CONFIG_QCOM_LMH targeting a630 slowness on new kernel
---- Out of tree patches used ----
For a360 device:
* Revert a commit which remove slpi_region from msm8996:
8b0031f8bda2 ("Revert "arm64: msm8996: fix memory region overlap"")
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13089>
(cherry picked from commit 7fea3c6f14)
We've noticed issues with these tests when uprevving Mesa in Chrome OS.
This CI catches some existing failures, and some debug-build assertion
failures as well.
To do this, uprev deqp-runner for its new gtest-runner command. This
runner is not as efficient as I would hope, due to some expensive code in
gtest. I've reported the issue to gtest and it should be easily fixable,
but for now it at least means we get to use the same baseline/skip/flake
handling we have from deqp and piglit runners.
I also fixed build-libdrm for our rootfses to not throw away libdrm's
share directory, which was causing a bunch of test-time spam from radeon's
libdrm when trying to look up its marketing name tables (not that big of a
deal for deqp-runner, but really noisy for piglit and libva-utils which
make gallium screens approximatly per-test).
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13419>
(cherry picked from commit 8fb850651c)
The test names are definitely unique (deqp has specific prefixes, piglit
uses '@' as a separator instead of '.'), so we can just have a single file
regardless of test type. Merges the two groups of xfails together so you
can't mix up which file to edit (I certainly have), and so that we don't
need to introduce yet another set of files when we add gtest for libva.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13517>
(cherry picked from commit bfbc41a9fa)
This is prettier in the log files, less shell code, and for non-suite mode
adds checking that the driver has the right git sha1. Also, no need for
suites to have a DEQP_VER to say which dEQP we should run for the renderer
check.
The version checks can help us make sure that GL version exposed doesn't
accidentally regress, and the ".*git" checks that we're using a git
version of Mesa rather than something that snuck in through distro
packages.
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13372>
(cherry picked from commit b978688df6)
vertex shader stages that can produce xfb must have
their input size clamped to the compiler define MAX_VARYING
to successfully be able to export an xfb output for each input
fixes KHR-GL46.geometry_shader.limits.max_input_components
cc: mesa-stable
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13632>
(cherry picked from commit 5d1b81d8ac)
