Otherwise eglCreateWaylandBufferFromImageWL will fail, since we
have no "supported" format.
Fixes: 02cc359372 ("egl/wayland: Use linux-dmabuf interface for buffers")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
(cherry picked from commit 9e07005e87)
For most/all cases today, we have wl_drm available alongside wl_dmabuf.
Yet in the long run, we want to make sure the latter can operate without
any traces of the former.
Fixes: 02cc359372 ("egl/wayland: Use linux-dmabuf interface for buffers")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
(cherry picked from commit da100fe697)
The wl_drm wrapper is created before the wl display/surface ones.
Thus make sure we destroy it after them. In reality it should not make
any difference either way.
Fixes: 03dd9a88b0 ("egl/wayland: Use per-surface event queues")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
(cherry picked from commit 1a8015e753)
(commit split out by Bas Nieuwenhuizen)
Fixes: 65477bae9c "radv: enable GFX9 on radv"
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
(cherry picked from commit 9573bd70e1)
One could easily introduce version 3 of the DRI2fenceExtension,
extending the struct, while not implementing the above function.
Thus we'll end up with NULL pointer, and dereferencing it won't fare
too well.
Fixes: 0201f01dc4 ("egl: add EGL_ANDROID_native_fence_sync")
Cc: Rob Clark <robclark@freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
(cherry picked from commit f0d053cb6d)
If we merge a mapping with the mapping before it, we also need
to not only change the offset, but also the bo offset.
Fixes: 715df30a4e "radv/amdgpu: Add winsys implementation of virtual buffers."
Reviewed-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 9b7e663da1)
We don't use the render path so totally unneeded.
Fixes: 19be95f71e "radv: add subpass resolve compute path"
Reviewed-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit bd81cb3206)
Recording secondaries with no framebuffer attachment may
make this happen, though this might not be the complete solution.
(esp if someone does meta stuff in there, would we have to
save things, not sure).
Fixes: f4e499ec79 ("radv: add initial non-conformant radv vulkan driver")
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 4a091b0788)
When I added gfx9 I did it wrong, this fixes it.
Fixes: 5247b311e9 "radv/gfx9: fix set predication packet."
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 12fd0f8dc1)
This code was separated from the validation code so it could
use used with KHR_no_error paths. The return values were inverted
to reflect the name of the helper, but here the condtion was
mistakenly inverted rather than the return value.
Fixes: 4df2931a87 (mesa/vbo: move some Draw checks out of validation)
Reported-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit a4635c84dc)
In get_back_bo, we use wl_display_dispatch_queue() to block and wait for
a buffer release event. However, not all Wayland compositors flush the
client socket on posting a buffer-release event, so by only blocking
client-side, we may block indefinitely, or at least need to wait for an
input event / frame completion to arrive for the compositor to flush.
We now use dispatch_queue as a first pass, but if our entire buffer pool
is exhausted, use a roundtrip (an immediately-triggered wl_callback) to
ensure that the compositor flushes out our release event immediately.
[daniels: Modified comment and commit message.]
Signed-off-by: Kai Chen <kai.chen@intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
CC: <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 151188d1e3)
The int32->float semantic conversion got dropped in a testcase,
because the src was already float. On closer inspection I decided
to add a few more casts for integer op operands to be safe too.
Cc: 17.2 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 43595db302)
[Emil Velikov: squash trivial conflicts]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/amd/common/ac_nir_to_llvm.c
All of the coordinates and LOD args are integers for TXF. This mostly
doesn't matter, except for converting into a levelZero=true operation by
removing an explicit zero LOD. For the comparison against zero to work
properly, the sType of the instruction has to be set correctly.
Fixes: KHR-GL45.robust_buffer_access_behavior.texel_fetch
Reported-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 96be442b77)
For gfx9 the addressing for images has changed, so we need to
provide the hw with the level0, however we still need to scale
for format block differences (so our compressed upload paths still
work).
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit bae7723e13)
Avoid passing the vulkan image creation into the image view descriptor
setup. This cleans up the usage of range inside the init, instead
using the properly inited values in the image view.
This is just a cleanup but some future vega changes will depend on it.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 5378b5d071)
GFX9 needs the SX MRT blend registers programmed, port over
the code from radeonsi to workout the values from the blend
state, and program the registers on rbplus systems.
This fixes lots of:
dEQP-VK.pipeline.blend.*
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 9c080100d3)
When changing fast clear colors, we need to emit new SURFACE_STATE
with the updated color at the next draw call.
Most things work today because the atoms that handle SURFACE_STATE
for images (mutable images, textures, render targets) also listen to
BRW_NEW_BLORP, causing us to re-emit these on every BLORP operation.
However, this is overkill - most BLORP operations don't require us
to re-emit SURFACE_STATE.
One case where this is broken today is a fast clear to a different
color followed by a non-coherent framebuffer fetch. The renderbuffer
read atom doesn't listen to BRW_NEW_BLORP, and would not get the new
fast clear color.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 54c41af0aa)
[Emil Velikov: squash trivial conflicts]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/mesa/drivers/dri/i965/brw_tcs_surface_state.c
In f9fd976e8a we changed the clear value to be stored as an
isl_color_value. This had the side-effect same clear value check is now
happening directly between the f32[0] field of the isl_color_value and
ctx->Depth.Clear. This isn't what we want for two reasons. One is that
the comparison happens in floating point even for Z16 and Z24 formats.
Worse than that, ctx->Depth.Clear is a double so, even for 32-bit float
formats, we were comparing as doubles and not floats. This means that
the test basically always fails for anything other than 0.0f and 1.0f.
This caused a slight performance regression in Lightsmark 2008 because
it was using a depth clear value of 0.999 which can't be stored in a
32-bit float so we were doing unneeded resolves.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Bugzilla: https://bugs.freedesktop.org/101678
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 0ae9ce0f29)
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
[Emil Velikov: squash trivial conflicts]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/mesa/drivers/dri/i965/brw_clear.c
Both statically linking libLLVMCore and dynamically linking libLLVM causes
duplicated symbols in gallium_dri.so and it fails to dlopen. We don't
really need to link libLLVMCore, but just need generated headers to be
built first. Dynamically linking to libLLVM instead is enough to do
that. Thanks to Qiang Yu for finding the root cause.
With this change, we can align all versions and just have libLLVM as a
shared lib dependency.
This also requires changes in the M and N versions of LLVM to export the
include paths for libLLVM. AOSP master is okay.
Fixes: 26aee6f4d5 ("Android: rework LLVM build support")
Reported-by: Mauro Rossi <issor.oruam@gmail.com>
Cc: 17.2 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Signed-off-by: Rob Herring <robh@kernel.org>
(cherry picked from commit 4734bfc02a)
In 76e2f390f9, when Topi switched num_samples from 0 to 1 for
single-sampled, he accidentally switched the last parameter in the call
to miptree_create_for_teximage from 0 to 1 thinking it was num_samples
when it was actually layout_flags. Switching from 0 to 1 added the
MIPTREE_LAYOUT_ACCELERATED_UPLOAD flag which causes us to allocate a
busy BO instead of an idle one. This caused the subsequent CPU upload
to consistently stall. The end result was a 15% performance drop in the
SynMark v7 DrvRes microbenchmark. This restores the old behavior and
fixes the performance regression.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Fixes: 76e2f390f9
Bugzilla: https://bugs.freedesktop.org/102260
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit f24cf82d6d)
This little optimization improves the performance of SynMark v7
TexFilterTri by almost 10% on Sky Lake GT4 among other improvements.
We've been doing it for some time but somehow it got dropped during
the miptree refactoring.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Bugzilla: https://bugs.freedesktop.org/102258
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 61d2f3f1c2)
Looking at NewDriverState is not safe in general. The state atom system
is set up to ensure that new bits that get added to NewDriverState get
accumulated into the set of bits used when emitting atoms but it doesn't
go the other way. If we read NewDriverState, we may not get the full
picture because the per-pipeline state (3D or compute) does not get
added to NewDriverState before state emit is done. It's especially
dangerous to do this from BLORP (either explicitly or implicitly when
BLORP calls gen7_upload_urb) because that does not happen during one of
the normal state upload paths.
This commit solves the problem by whacking all of the per-shader-stage
URB sizes to zero whenever we change the total URB size. We still have
to flag BRW_NEW_URB_SIZE to ensure that the gen7_urb atom triggers but
the actual decision in gen7_upload_urb can now be based entirely on URB
sizes rather than on state atoms. This also makes BLORP correct because
it just asks for a new URB config whenever the vsize is too small and so
any change to the total URB size will trigger blorp to re-emit as well
because 0 < vs_entry_size.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Bugzilla: https://bugs.freedesktop.org/102289
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit d5e217dbfd)
EGLimages are shared with external users, and we don't know what they're
going to do with them. They might scan them out. They might access
them in a way that doesn't work with our explicit clflushing.
It's safest to simply mark them non-coherent.
Chris Wilson caught this problem and wrote a similar (though less
aggressive) patch to solve it; the miptree code has since undergone
a lot of refactoring so I had to rewrite it.
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit bc56dfbf3f)
[Emil Velikov: squash trivial conflicts]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/mesa/drivers/dri/i965/intel_mipmap_tree.c
