mesa: bump version to 7.4 rc2

Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>

.emacs-dirvars

@@ -1,10 +0,0 @@
-;; -*- emacs-lisp -*-
-;;
-;; This file is processed by the dirvars emacs package.  Each variable
-;; setting below is performed when this dirvars file is loaded.
-;;
-indent-tabs-mode: nil
-tab-width: 8
-c-basic-offset: 3
-kde-emacs-after-parent-string: ""
-evaluate: (c-set-offset 'inline-open '0)

.gitignore

@@ -1,16 +1,8 @@
 *.a
-*.dll
-*.exe
-*.ilk
 *.o
-*.obj
-*.os
-*.pc
-*.pdb
-*.pyc
-*.pyo
 *.so
 *.sw[a-z]
+*.pc
 *~
 depend
 depend.bak
@@ -22,6 +14,3 @@ aclocal.m4
 config.log
 config.status
 cscope*
-.scon*
-config.py
-build

Makefile

@@ -12,8 +12,6 @@ default: $(TOP)/configs/current
 		fi \
 	done
 
-all: default
-
 
 doxygen:
 	cd doxygen && $(MAKE)
@@ -37,8 +35,6 @@ realclean: clean
 	  -name depend -o -name depend.bak ')' -exec rm -f '{}' ';'
 
 
-distclean: realclean
-
 
 install:
 	@for dir in $(SUBDIRS) ; do \
@@ -48,7 +44,11 @@ install:
 	done
 
 
-.PHONY: default doxygen clean realclean distclean install
+# DirectFBGL module installation
+linux-directfb-install:
+	cd src/mesa/drivers/directfb && $(MAKE) install
+
+.PHONY: default doxygen clean realclean install linux-directfb-install
 
 # If there's no current configuration file
 $(TOP)/configs/current:
@@ -80,6 +80,8 @@ catamount-osmesa-pgi \
 darwin \
 darwin-fat-32bit \
 darwin-fat-all \
+darwin-static \
+darwin-static-x86ppc \
 freebsd \
 freebsd-dri \
 freebsd-dri-amd64 \
@@ -103,36 +105,32 @@ irix6-n32-static \
 irix6-o32 \
 irix6-o32-static \
 linux \
-linux-i965 \
 linux-alpha \
 linux-alpha-static \
-linux-cell \
-linux-cell-debug \
 linux-debug \
+linux-directfb \
 linux-dri \
 linux-dri-debug \
 linux-dri-x86 \
 linux-dri-x86-64 \
 linux-dri-ppc \
 linux-dri-xcb \
-linux-egl \
 linux-indirect \
 linux-fbdev \
+linux-glide \
 linux-ia64-icc \
 linux-ia64-icc-static \
 linux-icc \
 linux-icc-static \
-linux-llvm \
-linux-llvm-debug \
-linux-opengl-es \
 linux-osmesa \
-linux-osmesa-static \
 linux-osmesa16 \
 linux-osmesa16-static \
 linux-osmesa32 \
 linux-ppc \
 linux-ppc-static \
-linux-profile \
+linux-solo \
+linux-solo-x86 \
+linux-solo-ia64 \
 linux-sparc \
 linux-sparc5 \
 linux-static \
@@ -143,9 +141,8 @@ linux-x86-debug \
 linux-x86-32 \
 linux-x86-64 \
 linux-x86-64-debug \
-linux-x86-64-profile \
 linux-x86-64-static \
-linux-x86-profile \
+linux-x86-glide \
 linux-x86-static \
 netbsd \
 openbsd \
@@ -167,20 +164,17 @@ sunos5-v9 \
 sunos5-v9-static \
 sunos5-v9-cc-g++ \
 ultrix-gcc:
-	@ if test -f configs/current -o -L configs/current; then \
-		if ! cmp configs/$@ configs/current > /dev/null; then \
-			echo "Please run 'make realclean' before changing configs" ; \
-			exit 1 ; \
-		fi ; \
-	else \
-		cd configs && rm -f current && ln -s $@ current ; \
+	@ if test -f configs/current || test -L configs/current ; then \
+		echo "Please run 'make realclean' before changing configs" ; \
+		exit 1 ; \
 	fi
+	(cd configs && rm -f current && ln -s $@ current)
 	$(MAKE) default
 
 
 # Rules for making release tarballs
 
-VERSION=7.8.1
+VERSION=7.4-rc2
 DIRECTORY = Mesa-$(VERSION)
 LIB_NAME = MesaLib-$(VERSION)
 DEMO_NAME = MesaDemos-$(VERSION)
@@ -192,6 +186,8 @@ MAIN_FILES = \
 	$(DIRECTORY)/configure.ac					\
 	$(DIRECTORY)/acinclude.m4					\
 	$(DIRECTORY)/aclocal.m4						\
+	$(DIRECTORY)/descrip.mms					\
+	$(DIRECTORY)/mms-config.					\
 	$(DIRECTORY)/bin/config.guess					\
 	$(DIRECTORY)/bin/config.sub					\
 	$(DIRECTORY)/bin/install-sh					\
@@ -205,6 +201,8 @@ MAIN_FILES = \
 	$(DIRECTORY)/docs/RELNOTES*					\
 	$(DIRECTORY)/docs/*.spec					\
 	$(DIRECTORY)/include/GL/internal/glcore.h			\
+	$(DIRECTORY)/include/GL/dmesa.h					\
+	$(DIRECTORY)/include/GL/ggimesa.h				\
 	$(DIRECTORY)/include/GL/gl.h					\
 	$(DIRECTORY)/include/GL/glext.h					\
 	$(DIRECTORY)/include/GL/gl_mangle.h				\
@@ -217,19 +215,13 @@ MAIN_FILES = \
 	$(DIRECTORY)/include/GL/mesa_wgl.h				\
 	$(DIRECTORY)/include/GL/mglmesa.h				\
 	$(DIRECTORY)/include/GL/osmesa.h				\
+	$(DIRECTORY)/include/GL/svgamesa.h				\
 	$(DIRECTORY)/include/GL/vms_x_fix.h				\
-	$(DIRECTORY)/include/GL/wglext.h				\
 	$(DIRECTORY)/include/GL/wmesa.h					\
-	$(DIRECTORY)/include/VG/*.h					\
-	$(DIRECTORY)/include/KHR/*.h					\
-	$(DIRECTORY)/src/glsl/Makefile					\
-	$(DIRECTORY)/src/glsl/Makefile.template				\
-	$(DIRECTORY)/src/glsl/SConscript				\
-	$(DIRECTORY)/src/glsl/*/Makefile				\
-	$(DIRECTORY)/src/glsl/*/*.[ch]					\
 	$(DIRECTORY)/src/Makefile					\
+	$(DIRECTORY)/src/descrip.mms					\
 	$(DIRECTORY)/src/mesa/Makefile*					\
-	$(DIRECTORY)/src/mesa/sources.mak				\
+	$(DIRECTORY)/src/mesa/sources					\
 	$(DIRECTORY)/src/mesa/descrip.mms				\
 	$(DIRECTORY)/src/mesa/gl.pc.in					\
 	$(DIRECTORY)/src/mesa/osmesa.pc.in				\
@@ -237,14 +229,18 @@ MAIN_FILES = \
 	$(DIRECTORY)/src/mesa/main/*.[chS]				\
 	$(DIRECTORY)/src/mesa/main/descrip.mms				\
 	$(DIRECTORY)/src/mesa/glapi/*.[chS]				\
+	$(DIRECTORY)/src/mesa/glapi/descrip.mms				\
 	$(DIRECTORY)/src/mesa/math/*.[ch]				\
 	$(DIRECTORY)/src/mesa/math/descrip.mms				\
-	$(DIRECTORY)/src/mesa/shader/*.[chly]				\
-	$(DIRECTORY)/src/mesa/shader/Makefile				\
+	$(DIRECTORY)/src/mesa/shader/*.[ch]				\
 	$(DIRECTORY)/src/mesa/shader/descrip.mms			\
+	$(DIRECTORY)/src/mesa/shader/grammar/*.[ch]			\
+	$(DIRECTORY)/src/mesa/shader/grammar/descrip.mms		\
 	$(DIRECTORY)/src/mesa/shader/slang/*.[ch]			\
 	$(DIRECTORY)/src/mesa/shader/slang/descrip.mms			\
+	$(DIRECTORY)/src/mesa/shader/slang/library/*.[ch]		\
 	$(DIRECTORY)/src/mesa/shader/slang/library/*.gc			\
+	$(DIRECTORY)/src/mesa/shader/slang/library/*.syn		\
 	$(DIRECTORY)/src/mesa/shader/slang/library/Makefile		\
 	$(DIRECTORY)/src/mesa/swrast/*.[ch]				\
 	$(DIRECTORY)/src/mesa/swrast/descrip.mms			\
@@ -262,13 +258,25 @@ MAIN_FILES = \
 	$(DIRECTORY)/src/mesa/drivers/beos/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/common/*.[ch]			\
 	$(DIRECTORY)/src/mesa/drivers/common/descrip.mms		\
+	$(DIRECTORY)/src/mesa/drivers/directfb/*.[ch]			\
+	$(DIRECTORY)/src/mesa/drivers/directfb/Makefile			\
+	$(DIRECTORY)/src/mesa/drivers/dos/*.[chS]			\
 	$(DIRECTORY)/src/mesa/drivers/fbdev/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/fbdev/glfbdev.c			\
+	$(DIRECTORY)/src/mesa/drivers/glide/*.[ch]			\
+	$(DIRECTORY)/src/mesa/drivers/ggi/*.[ch]			\
+	$(DIRECTORY)/src/mesa/drivers/ggi/ggimesa.conf.in		\
+	$(DIRECTORY)/src/mesa/drivers/ggi/default/*.c			\
+	$(DIRECTORY)/src/mesa/drivers/ggi/default/genkgi.conf.in	\
+	$(DIRECTORY)/src/mesa/drivers/ggi/display/*.c			\
+	$(DIRECTORY)/src/mesa/drivers/ggi/display/fbdev.conf.in		\
+	$(DIRECTORY)/src/mesa/drivers/ggi/include/ggi/mesa/*.h		\
 	$(DIRECTORY)/src/mesa/drivers/osmesa/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/osmesa/Makefile.win		\
 	$(DIRECTORY)/src/mesa/drivers/osmesa/descrip.mms		\
 	$(DIRECTORY)/src/mesa/drivers/osmesa/osmesa.def			\
 	$(DIRECTORY)/src/mesa/drivers/osmesa/*.[ch]			\
+	$(DIRECTORY)/src/mesa/drivers/svga/*.[ch]			\
 	$(DIRECTORY)/src/mesa/drivers/windows/*/*.[ch]			\
 	$(DIRECTORY)/src/mesa/drivers/windows/*/*.def			\
 	$(DIRECTORY)/src/mesa/drivers/x11/Makefile			\
@@ -288,83 +296,40 @@ MAIN_FILES = \
 	$(DIRECTORY)/progs/util/README					\
 	$(DIRECTORY)/progs/util/*.[ch]					\
 	$(DIRECTORY)/progs/util/sampleMakefile				\
+	$(DIRECTORY)/vms/analyze_map.com				\
+	$(DIRECTORY)/vms/xlib.opt					\
+	$(DIRECTORY)/vms/xlib_share.opt					\
 	$(DIRECTORY)/windows/VC8/
 
-ES_FILES = \
-	$(DIRECTORY)/include/GLES/*.h					\
-	$(DIRECTORY)/include/GLES2/*.h					\
-	$(DIRECTORY)/src/mesa/glapi/gen/*.xml				\
-	$(DIRECTORY)/src/mesa/glapi/gen/*.py				\
-	$(DIRECTORY)/src/mesa/glapi/gen/*.dtd				\
-	$(DIRECTORY)/src/mesa/es/glapi/Makefile				\
-	$(DIRECTORY)/src/mesa/es/glapi/*.xml				\
-	$(DIRECTORY)/src/mesa/es/glapi/*.py				\
-	$(DIRECTORY)/src/mesa/es/state_tracker/*.[ch]			\
-	$(DIRECTORY)/src/mesa/es/main/*.[ch]				\
-	$(DIRECTORY)/src/mesa/es/main/*.xml				\
-	$(DIRECTORY)/src/mesa/es/main/*.py				\
-	$(DIRECTORY)/src/mesa/es/main/*.dtd				\
-	$(DIRECTORY)/src/mesa/es/Makefile				\
-	$(DIRECTORY)/src/mesa/es/sources.mak				\
-
-EGL_FILES = \
-	$(DIRECTORY)/include/EGL/*.h					\
-	$(DIRECTORY)/src/egl/Makefile					\
-	$(DIRECTORY)/src/egl/*/Makefile					\
-	$(DIRECTORY)/src/egl/*/Makefile.template			\
-	$(DIRECTORY)/src/egl/*/*.[ch]					\
-	$(DIRECTORY)/src/egl/*/*/Makefile				\
-	$(DIRECTORY)/src/egl/*/*/*.[ch]					\
-
-GALLIUM_FILES = \
-	$(DIRECTORY)/src/mesa/state_tracker/*[ch]			\
-	$(DIRECTORY)/src/gallium/Makefile				\
-	$(DIRECTORY)/src/gallium/Makefile.template			\
-	$(DIRECTORY)/src/gallium/SConscript				\
-	$(DIRECTORY)/src/gallium/*/Makefile				\
-	$(DIRECTORY)/src/gallium/*/SConscript				\
-	$(DIRECTORY)/src/gallium/*/*/Makefile				\
-	$(DIRECTORY)/src/gallium/*/*/Makefile.egl			\
-	$(DIRECTORY)/src/gallium/*/*/Makefile.template			\
-	$(DIRECTORY)/src/gallium/*/*/SConscript				\
-	$(DIRECTORY)/src/gallium/*/*/*.[ch]				\
-	$(DIRECTORY)/src/gallium/*/*/*.py				\
-	$(DIRECTORY)/src/gallium/*/*/*.csv				\
-	$(DIRECTORY)/src/gallium/*/*/*/Makefile				\
-	$(DIRECTORY)/src/gallium/*/*/*/SConscript			\
-	$(DIRECTORY)/src/gallium/*/*/*/*.[ch]				\
-	$(DIRECTORY)/src/gallium/*/*/*/*.py				\
-	$(DIRECTORY)/src/gallium/*/*/*/*/Makefile			\
-	$(DIRECTORY)/src/gallium/*/*/*/*/*.[ch]				\
-
 
 DRI_FILES = \
 	$(DIRECTORY)/include/GL/internal/dri_interface.h		\
 	$(DIRECTORY)/include/GL/internal/glcore.h			\
 	$(DIRECTORY)/include/GL/internal/sarea.h			\
 	$(DIRECTORY)/src/glx/Makefile					\
-	$(DIRECTORY)/src/glx/Makefile					\
-	$(DIRECTORY)/src/glx/*.[ch]					\
+	$(DIRECTORY)/src/glx/x11/Makefile				\
+	$(DIRECTORY)/src/glx/x11/*.[ch]					\
 	$(DIRECTORY)/src/mesa/drivers/dri/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/dri/Makefile.template		\
 	$(DIRECTORY)/src/mesa/drivers/dri/dri.pc.in			\
 	$(DIRECTORY)/src/mesa/drivers/dri/common/xmlpool/*.[ch]		\
 	$(DIRECTORY)/src/mesa/drivers/dri/common/xmlpool/*.po		\
 	$(DIRECTORY)/src/mesa/drivers/dri/*/*.[chS]			\
-	$(DIRECTORY)/src/mesa/drivers/dri/*/*/*.[chS]			\
 	$(DIRECTORY)/src/mesa/drivers/dri/*/Makefile			\
-	$(DIRECTORY)/src/mesa/drivers/dri/*/*/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/dri/*/Doxyfile			\
 	$(DIRECTORY)/src/mesa/drivers/dri/*/server/*.[ch]
 
 SGI_GLU_FILES = \
 	$(DIRECTORY)/src/glu/Makefile					\
+	$(DIRECTORY)/src/glu/descrip.mms				\
 	$(DIRECTORY)/src/glu/glu.pc.in					\
 	$(DIRECTORY)/src/glu/sgi/Makefile				\
 	$(DIRECTORY)/src/glu/sgi/Makefile.mgw				\
 	$(DIRECTORY)/src/glu/sgi/Makefile.win				\
+	$(DIRECTORY)/src/glu/sgi/Makefile.DJ				\
 	$(DIRECTORY)/src/glu/sgi/glu.def				\
 	$(DIRECTORY)/src/glu/sgi/dummy.cc				\
+	$(DIRECTORY)/src/glu/sgi/descrip.mms				\
 	$(DIRECTORY)/src/glu/sgi/glu.exports				\
 	$(DIRECTORY)/src/glu/sgi/glu.exports.darwin			\
 	$(DIRECTORY)/src/glu/sgi/mesaglu.opt				\
@@ -380,6 +345,15 @@ SGI_GLU_FILES = \
 	$(DIRECTORY)/src/glu/sgi/libtess/*.[ch]				\
 	$(DIRECTORY)/src/glu/sgi/libutil/*.[ch]
 
+MESA_GLU_FILES = \
+	$(DIRECTORY)/src/glu/mesa/README[12]		\
+	$(DIRECTORY)/src/glu/mesa/Makefile*		\
+	$(DIRECTORY)/src/glu/mesa/descrip.mms		\
+	$(DIRECTORY)/src/glu/mesa/mms_depend		\
+	$(DIRECTORY)/src/glu/mesa/*.def			\
+	$(DIRECTORY)/src/glu/mesa/depend		\
+	$(DIRECTORY)/src/glu/mesa/*.[ch]
+
 GLW_FILES = \
 	$(DIRECTORY)/src/glw/*.[ch]			\
 	$(DIRECTORY)/src/glw/Makefile*			\
@@ -387,17 +361,7 @@ GLW_FILES = \
 	$(DIRECTORY)/src/glw/glw.pc.in			\
 	$(DIRECTORY)/src/glw/depend
 
-GLEW_FILES = \
-	$(DIRECTORY)/include/GL/glew.h			\
-	$(DIRECTORY)/include/GL/glxew.h			\
-	$(DIRECTORY)/include/GL/wglew.h			\
-	$(DIRECTORY)/src/glew/*.c			\
-	$(DIRECTORY)/src/glew/Makefile			\
-	$(DIRECTORY)/src/glew/SConscript		\
-	$(DIRECTORY)/src/glew/LICENSE.txt
-
 DEMO_FILES = \
-	$(GLEW_FILES)					\
 	$(DIRECTORY)/progs/beos/*.cpp			\
 	$(DIRECTORY)/progs/beos/Makefile		\
 	$(DIRECTORY)/progs/images/*.rgb			\
@@ -408,25 +372,12 @@ DEMO_FILES = \
 	$(DIRECTORY)/progs/demos/*.cxx			\
 	$(DIRECTORY)/progs/demos/*.dat			\
 	$(DIRECTORY)/progs/demos/README			\
-	$(DIRECTORY)/progs/egl/Makefile			\
-	$(DIRECTORY)/progs/egl/*.[ch]			\
-	$(DIRECTORY)/progs/es1/*/Makefile		\
-	$(DIRECTORY)/progs/es1/*/*.[ch]			\
-	$(DIRECTORY)/progs/es2/*/Makefile		\
-	$(DIRECTORY)/progs/es2/*/*.[ch]			\
-	$(DIRECTORY)/progs/openvg/*/Makefile		\
-	$(DIRECTORY)/progs/openvg/*/*.[ch]		\
 	$(DIRECTORY)/progs/fbdev/Makefile		\
 	$(DIRECTORY)/progs/fbdev/glfbdevtest.c		\
-	$(DIRECTORY)/progs/objviewer/*.[ch]		\
-	$(DIRECTORY)/progs/objviewer/*.obj		\
-	$(DIRECTORY)/progs/objviewer/*.mtl		\
-	$(DIRECTORY)/progs/objviewer/*.rgb		\
-	$(DIRECTORY)/progs/objviewer/Makefile		\
-	$(DIRECTORY)/progs/objviewer/README.txt		\
 	$(DIRECTORY)/progs/osdemos/Makefile		\
 	$(DIRECTORY)/progs/osdemos/*.c			\
 	$(DIRECTORY)/progs/xdemos/Makefile*		\
+	$(DIRECTORY)/progs/xdemos/descrip.mms		\
 	$(DIRECTORY)/progs/xdemos/*.[chf]		\
 	$(DIRECTORY)/progs/redbook/Makefile*		\
 	$(DIRECTORY)/progs/redbook/README		\
@@ -438,7 +389,14 @@ DEMO_FILES = \
 	$(DIRECTORY)/progs/glsl/*.c			\
 	$(DIRECTORY)/progs/glsl/*.frag			\
 	$(DIRECTORY)/progs/glsl/*.vert			\
-	$(DIRECTORY)/progs/glsl/*.shtest
+	$(DIRECTORY)/progs/windml/Makefile.ugl		\
+	$(DIRECTORY)/progs/windml/*.c			\
+	$(DIRECTORY)/progs/windml/*.bmp			\
+	$(DIRECTORY)/progs/ggi/*.c			\
+	$(DIRECTORY)/windows/VC6/progs/demos/*.dsp	\
+	$(DIRECTORY)/windows/VC6/progs/progs.dsw	\
+	$(DIRECTORY)/windows/VC7/progs/demos/*.vcproj	\
+	$(DIRECTORY)/windows/VC7/progs/progs.sln
 
 GLUT_FILES = \
 	$(DIRECTORY)/include/GL/glut.h			\
@@ -447,27 +405,36 @@ GLUT_FILES = \
 	$(DIRECTORY)/src/glut/glx/depend		\
 	$(DIRECTORY)/src/glut/glx/glut.pc.in		\
 	$(DIRECTORY)/src/glut/glx/*def			\
+	$(DIRECTORY)/src/glut/glx/descrip.mms		\
+	$(DIRECTORY)/src/glut/glx/mms_depend		\
 	$(DIRECTORY)/src/glut/glx/*.[ch]		\
 	$(DIRECTORY)/src/glut/beos/*.[ch]		\
 	$(DIRECTORY)/src/glut/beos/*.cpp		\
-	$(DIRECTORY)/src/glut/beos/Makefile
+	$(DIRECTORY)/src/glut/beos/Makefile		\
+	$(DIRECTORY)/src/glut/dos/*.[ch]		\
+	$(DIRECTORY)/src/glut/dos/Makefile.DJ		\
+	$(DIRECTORY)/src/glut/dos/PC_HW/*.[chS]		\
+	$(DIRECTORY)/src/glut/ggi/*.[ch]		\
+	$(DIRECTORY)/src/glut/ggi/Makefile		\
+	$(DIRECTORY)/src/glut/fbdev/Makefile		\
+	$(DIRECTORY)/src/glut/fbdev/*[ch]		\
+	$(DIRECTORY)/src/glut/mini/*[ch]		\
+	$(DIRECTORY)/src/glut/mini/glut.pc.in		\
+	$(DIRECTORY)/src/glut/directfb/Makefile		\
+	$(DIRECTORY)/src/glut/directfb/NOTES		\
+	$(DIRECTORY)/src/glut/directfb/*[ch]		\
+	$(DIRECTORY)/windows/VC6/progs/glut/glut.dsp	\
+	$(DIRECTORY)/windows/VC7/progs/glut/glut.vcproj
 
 DEPEND_FILES = \
 	$(TOP)/src/mesa/depend		\
-	$(TOP)/src/glx/depend		\
+	$(TOP)/src/glx/x11/depend	\
 	$(TOP)/src/glw/depend		\
 	$(TOP)/src/glut/glx/depend	\
 	$(TOP)/src/glu/sgi/depend
 
 
-LIB_FILES = \
-	$(MAIN_FILES)		\
-	$(ES_FILES)		\
-	$(EGL_FILES)		\
-	$(GALLIUM_FILES)	\
-	$(DRI_FILES)		\
-	$(SGI_GLU_FILES)	\
-	$(GLW_FILES)
+LIB_FILES = $(MAIN_FILES) $(DRI_FILES) $(SGI_GLU_FILES) $(GLW_FILES)
 
 
 # Everything for new a Mesa release:
@@ -491,11 +458,9 @@ rm_depend:
 		touch $$dep ; \
 	done
 
-rm_config:
-	rm -f configs/current
-	rm -f configs/autoconf
-
-lib_gz: rm_config
+lib_gz:
+	rm -f configs/current ; \
+	rm -f configs/autoconf ; \
 	cd .. ; \
 	tar -cf $(LIB_NAME).tar $(LIB_FILES) ; \
 	gzip $(LIB_NAME).tar ; \
@@ -513,7 +478,9 @@ glut_gz:
 	gzip $(GLUT_NAME).tar ; \
 	mv $(GLUT_NAME).tar.gz $(DIRECTORY)
 
-lib_bz2: rm_config
+lib_bz2:
+	rm -f configs/current ; \
+	rm -f configs/autoconf ; \
 	cd .. ; \
 	tar -cf $(LIB_NAME).tar $(LIB_FILES) ; \
 	bzip2 $(LIB_NAME).tar ; \
@@ -531,7 +498,9 @@ glut_bz2:
 	bzip2 $(GLUT_NAME).tar ; \
 	mv $(GLUT_NAME).tar.bz2 $(DIRECTORY)
 
-lib_zip: rm_config
+lib_zip:
+	rm -f configs/current ; \
+	rm -f configs/autoconf ; \
 	rm -f $(LIB_NAME).zip ; \
 	cd .. ; \
 	zip -qr $(LIB_NAME).zip $(LIB_FILES) ; \
@@ -560,7 +529,5 @@ md5:
 	@-md5sum $(GLUT_NAME).tar.bz2
 	@-md5sum $(GLUT_NAME).zip
 
-.PHONY: tarballs rm_depend rm_config md5 \
-	lib_gz demo_gz glut_gz \
-	lib_bz2 demo_bz2 glut_bz2 \
-	lib_zip demo_zip glut_zip
+.PHONY: tarballs rm_depend lib_gz demo_gz glut_gz lib_bz2 demo_bz2 \
+	glut_bz2 lib_zip demo_zip glut_zip md5

Makefile.DJ

@@ -0,0 +1,88 @@
+# Mesa 3-D graphics library
+# Version:  4.0
+# 
+# Copyright (C) 1999  Brian Paul   All Rights Reserved.
+# 
+# Permission is hereby granted, free of charge, to any person obtaining a
+# copy of this software and associated documentation files (the "Software"),
+# to deal in the Software without restriction, including without limitation
+# the rights to use, copy, modify, merge, publish, distribute, sublicense,
+# and/or sell copies of the Software, and to permit persons to whom the
+# Software is furnished to do so, subject to the following conditions:
+# 
+# The above copyright notice and this permission notice shall be included
+# in all copies or substantial portions of the Software.
+# 
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+# BRIAN PAUL BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+# DOS/DJGPP makefile for Mesa
+#
+#  Author: Daniel Borca
+#  Email : dborca@users.sourceforge.net
+#  Web   : http://www.geocities.com/dborca
+
+
+#
+#  Available options:
+#
+#    Environment variables:
+#	GLIDE		path to Glide3 SDK; used with FX.
+#			default = $(TOP)/glide3
+#	FX=1		build for 3dfx Glide3. Note that this disables
+#			compilation of most DMesa code and requires fxMesa.
+#			As a consequence, you'll need the DJGPP Glide3
+#			library to build any application.
+#			default = no
+#	X86=1		optimize for x86 (if possible, use MMX, SSE, 3DNow).
+#			default = no
+#
+#    Targets:
+#	all:		build everything
+#	libgl:		build GL
+#	libglu:		build GLU
+#	libglut:	build GLUT
+#	clean:		remove object files
+#	realclean:	remove all generated files
+#
+
+
+
+.PHONY : all libgl libglu libglut clean realclean
+
+CFLAGS = -Wall -W -pedantic
+CFLAGS += -O2 -ffast-math
+
+export CFLAGS
+
+ifeq ($(wildcard $(addsuffix /rm.exe,$(subst ;, ,$(PATH)))),)
+UNLINK = del $(subst /,\,$(1))
+else
+UNLINK = $(RM) $(1)
+endif
+
+all: libgl libglu libglut
+
+libgl: lib
+	$(MAKE) -f Makefile.DJ -C src/mesa
+libglu: lib
+	$(MAKE) -f Makefile.DJ -C src/glu/sgi
+libglut: lib
+	$(MAKE) -f Makefile.DJ -C src/glut/dos
+
+lib:
+	mkdir lib
+
+clean:
+	$(MAKE) -f Makefile.DJ clean -C src/mesa
+	$(MAKE) -f Makefile.DJ clean -C src/glu/mesa
+	$(MAKE) -f Makefile.DJ clean -C src/glu/sgi
+	$(MAKE) -f Makefile.DJ clean -C src/glut/dos
+
+realclean: clean
+	-$(call UNLINK,lib/*.a)
+	-$(call UNLINK,lib/*.dxe)

Makefile.mgw

@@ -0,0 +1,110 @@
+# Mesa 3-D graphics library
+# Version:  4.0
+# 
+# Copyright (C) 1999  Brian Paul   All Rights Reserved.
+# 
+# Permission is hereby granted, free of charge, to any person obtaining a
+# copy of this software and associated documentation files (the "Software"),
+# to deal in the Software without restriction, including without limitation
+# the rights to use, copy, modify, merge, publish, distribute, sublicense,
+# and/or sell copies of the Software, and to permit persons to whom the
+# Software is furnished to do so, subject to the following conditions:
+# 
+# The above copyright notice and this permission notice shall be included
+# in all copies or substantial portions of the Software.
+# 
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+# BRIAN PAUL BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+# MinGW makefile v1.2 for Mesa
+#
+#  Copyright (C) 2002 - Daniel Borca
+#  Email : dborca@users.sourceforge.net
+#  Web   : http://www.geocities.com/dborca
+
+
+#
+#  Available options:
+#
+#    Environment variables:
+#	GLIDE		path to Glide3 SDK; used with FX.
+#			default = $(TOP)/glide3
+#	FX=1		build for 3dfx Glide3. Note that this disables
+#			compilation of most WMesa code and requires fxMesa.
+#			As a consequence, you'll need the Win32 Glide3
+#			library to build any application.
+#			default = no
+#	ICD=1		build the installable client driver interface
+#			(windows opengl driver interface)
+#			default = no
+#	X86=1		optimize for x86 (if possible, use MMX, SSE, 3DNow).
+#			default = no
+#
+#    Targets:
+#	all:		build everything
+#	libgl:		build GL
+#	clean:		remove object files
+#	realclean:	remove all generated files
+#
+
+# MinGW core makefile updated for Mesa 7.0
+#
+#  Updated : by Heromyth, on 2007-7-21
+#  Email   : zxpmyth@yahoo.com.cn
+#  Bugs    : 1) All the default settings work fine. But the setting X86=1 can't work. 
+#            The others havn't been tested yet.
+#            2) The generated DLLs are *not* compatible with the ones built
+#            with the other compilers like VC8, especially for GLUT. 
+#            3) MAlthough more tests are needed, it can be used individually!
+
+
+.PHONY : all libgl clean realclean
+
+ifeq ($(ICD),1)
+  # when -std=c99 mingw will not define WIN32
+  CFLAGS = -Wall -Werror
+else
+  # I love c89
+  CFLAGS = -Wall -pedantic
+endif
+CFLAGS += -O2 -ffast-math
+
+export CFLAGS
+
+
+ifeq ($(wildcard $(addsuffix /rm.exe,$(subst ;, ,$(PATH)))),)
+UNLINK = del $(subst /,\,$(1))
+else
+UNLINK = $(RM) $(1)
+endif
+
+all: libgl libglu libglut example
+
+libgl: lib
+	$(MAKE) -f Makefile.mgw -C src/mesa
+
+libglu: libgl
+	$(MAKE) -f Makefile.mgw -C src/glu/sgi
+
+libglut: libglu 
+	$(MAKE) -f Makefile.mgw -C src/glut/glx
+
+example: libglut 
+	$(MAKE) -f Makefile.mgw star -C progs/samples
+	copy progs\samples\star.exe lib
+
+lib:
+	mkdir lib
+
+clean:
+	$(MAKE) -f Makefile.mgw clean -C src/mesa
+	$(MAKE) -f Makefile.mgw clean -C src/glu/sgi
+	$(MAKE) -f Makefile.mgw clean -C src/glut/glx
+
+realclean: clean
+	-$(call UNLINK,lib/*.a)
+	-$(call UNLINK,lib/*.dll)

SConstruct

@@ -1,238 +0,0 @@
-#######################################################################
-# Top-level SConstruct
-#
-# For example, invoke scons as 
-#
-#   scons debug=1 dri=0 machine=x86
-#
-# to set configuration variables. Or you can write those options to a file
-# named config.py:
-#
-#   # config.py
-#   debug=1
-#   dri=0
-#   machine='x86'
-# 
-# Invoke
-#
-#   scons -h
-#
-# to get the full list of options. See scons manpage for more info.
-#  
-
-import os
-import os.path
-import sys
-import SCons.Util
-
-import common
-
-#######################################################################
-# Configuration options
-
-default_statetrackers = 'mesa'
-
-if common.default_platform in ('linux', 'freebsd', 'darwin'):
-	default_drivers = 'softpipe,failover,svga,i915,i965,trace,identity,llvmpipe'
-	default_winsys = 'xlib'
-elif common.default_platform in ('winddk',):
-	default_drivers = 'softpipe,svga,i915,i965,trace,identity'
-	default_winsys = 'all'
-elif common.default_platform in ('embedded',):
-	default_drivers = 'softpipe,llvmpipe'
-	default_winsys = 'xlib'
-else:
-	default_drivers = 'all'
-	default_winsys = 'all'
-
-opts = Variables('config.py')
-common.AddOptions(opts)
-opts.Add(ListVariable('statetrackers', 'state trackers to build', default_statetrackers,
-                     ['mesa', 'python', 'xorg']))
-opts.Add(ListVariable('drivers', 'pipe drivers to build', default_drivers,
-                     ['softpipe', 'failover', 'svga', 'i915', 'i965', 'trace', 'r300', 'identity', 'llvmpipe']))
-opts.Add(ListVariable('winsys', 'winsys drivers to build', default_winsys,
-                     ['xlib', 'vmware', 'intel', 'i965', 'gdi', 'radeon']))
-
-opts.Add(EnumVariable('MSVS_VERSION', 'MS Visual C++ version', None, allowed_values=('7.1', '8.0', '9.0')))
-
-env = Environment(
-	options = opts,
-	tools = ['gallium'],
-	toolpath = ['#scons'],	
-	ENV = os.environ,
-)
-
-if os.environ.has_key('CC'):
-	env['CC'] = os.environ['CC']
-if os.environ.has_key('CFLAGS'):
-	env['CCFLAGS'] += SCons.Util.CLVar(os.environ['CFLAGS'])
-if os.environ.has_key('CXX'):
-	env['CXX'] = os.environ['CXX']
-if os.environ.has_key('CXXFLAGS'):
-	env['CXXFLAGS'] += SCons.Util.CLVar(os.environ['CXXFLAGS'])
-if os.environ.has_key('LDFLAGS'):
-	env['LINKFLAGS'] += SCons.Util.CLVar(os.environ['LDFLAGS'])
-
-Help(opts.GenerateHelpText(env))
-
-# replicate options values in local variables
-debug = env['debug']
-dri = env['dri']
-machine = env['machine']
-platform = env['platform']
-drawllvm = 'llvmpipe' in env['drivers']
-
-# LLVM support in the Draw module
-if drawllvm:
-        env.Tool('llvm')
-        if not env.has_key('LLVM_VERSION'):
-           drawllvm = False
-
-# derived options
-x86 = machine == 'x86'
-ppc = machine == 'ppc'
-gcc = platform in ('linux', 'freebsd', 'darwin', 'embedded')
-msvc = platform in ('windows', 'winddk')
-
-Export([
-	'debug', 
-	'x86', 
-	'ppc', 
-	'dri', 
-	'drawllvm',
-	'platform',
-	'gcc',
-	'msvc',
-])
-
-
-#######################################################################
-# Environment setup
-
-# Always build trace driver
-if 'trace' not in env['drivers']:
-    env['drivers'].append('trace')
-
-# Includes
-env.Append(CPPPATH = [
-	'#/include',
-	'#/src/gallium/include',
-	'#/src/gallium/auxiliary',
-	'#/src/gallium/drivers',
-])
-
-if env['msvc']:
-    env.Append(CPPPATH = ['#include/c99'])
-
-# Embedded
-if platform == 'embedded':
-	env.Append(CPPDEFINES = [
-		'_POSIX_SOURCE',
-		('_POSIX_C_SOURCE', '199309L'), 
-		'_SVID_SOURCE',
-		'_BSD_SOURCE', 
-		'_GNU_SOURCE',
-		
-		'PTHREADS',
-	])
-	env.Append(LIBS = [
-		'm',
-		'pthread',
-		'dl',
-	])
-
-# Posix
-if platform in ('posix', 'linux', 'freebsd', 'darwin'):
-	env.Append(CPPDEFINES = [
-		'_POSIX_SOURCE',
-		('_POSIX_C_SOURCE', '199309L'), 
-		'_SVID_SOURCE',
-		'_BSD_SOURCE', 
-		'_GNU_SOURCE',
-		
-		'PTHREADS',
-		'HAVE_POSIX_MEMALIGN',
-	])
-	if platform == 'darwin':
-		env.Append(CPPDEFINES = ['_DARWIN_C_SOURCE'])
-	env.Append(CPPPATH = ['/usr/X11R6/include'])
-	env.Append(LIBPATH = ['/usr/X11R6/lib'])
-	env.Append(LIBS = [
-		'm',
-		'pthread',
-		'expat',
-		'dl',
-	])
-
-# DRI
-if dri:
-	env.ParseConfig('pkg-config --cflags --libs libdrm')
-	env.Append(CPPDEFINES = [
-		('USE_EXTERNAL_DXTN_LIB', '1'), 
-		'IN_DRI_DRIVER',
-		'GLX_DIRECT_RENDERING',
-		'GLX_INDIRECT_RENDERING',
-	])
-
-# LLVM support in the Draw module
-if drawllvm:
-    env.Append(CPPDEFINES = ['DRAW_LLVM'])
-
-# libGL
-if platform in ('linux', 'freebsd', 'darwin'):
-	env.Append(LIBS = [
-		'X11',
-		'Xext',
-		'Xxf86vm',
-		'Xdamage',
-		'Xfixes',
-	])
-
-# for debugging
-#print env.Dump()
-
-Export('env')
-
-
-#######################################################################
-# Invoke SConscripts
-
-# TODO: Build several variants at the same time?
-# http://www.scons.org/wiki/SimultaneousVariantBuilds
-
-if env['platform'] != common.default_platform:
-    # GLSL code has to be built twice -- one for the host OS, another for the target OS...
-
-    host_env = Environment(
-        # options are ignored
-        # default tool is used
-        tools = ['default', 'custom'],
-        toolpath = ['#scons'],	
-        ENV = os.environ,
-    )
-
-    host_env['platform'] = common.default_platform
-    host_env['machine'] = common.default_machine
-    host_env['debug'] = env['debug']
-
-    SConscript(
-        'src/glsl/SConscript',
-        variant_dir = os.path.join(env['build'], 'host'),
-        duplicate = 0, # http://www.scons.org/doc/0.97/HTML/scons-user/x2261.html
-        exports={'env':host_env},
-    )
-
-SConscript(
-	'src/SConscript',
-	variant_dir = env['build'],
-	duplicate = 0 # http://www.scons.org/doc/0.97/HTML/scons-user/x2261.html
-)
-
-env.Default('src')
-
-SConscript(
-    'progs/SConscript',
-    variant_dir = os.path.join('progs', env['build']),
-    duplicate = 0 # http://www.scons.org/doc/0.97/HTML/scons-user/x2261.html
-)

autogen.sh

@@ -11,8 +11,6 @@ if test "x$SRCDIR" != "x$ORIGDIR"; then
 	exit 1
 fi
 
-MAKEFLAGS=""
-
 autoreconf -v --install || exit 1
 
 "$srcdir"/configure "$@"

bin/config.guess

@@ -1,10 +1,10 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
-#   Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
+#   Inc.
 
-timestamp='2009-02-03'
+timestamp='2007-07-22'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -56,8 +56,8 @@ version="\
 GNU config.guess ($timestamp)
 
 Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -331,20 +331,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
     i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
-	eval $set_cc_for_build
-	SUN_ARCH="i386"
-	# If there is a compiler, see if it is configured for 64-bit objects.
-	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
-	# This test works for both compilers.
-	if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
-	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
-		(CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
-		grep IS_64BIT_ARCH >/dev/null
-	    then
-		SUN_ARCH="x86_64"
-	    fi
-	fi
-	echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
     sun4*:SunOS:6*:*)
 	# According to config.sub, this is the proper way to canonicalize
@@ -545,7 +532,7 @@ EOF
 		echo rs6000-ibm-aix3.2
 	fi
 	exit ;;
-    *:AIX:*:[456])
+    *:AIX:*:[45])
 	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
 	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
 		IBM_ARCH=rs6000
@@ -809,12 +796,9 @@ EOF
 	    x86)
 		echo i586-pc-interix${UNAME_RELEASE}
 		exit ;;
-	    EM64T | authenticamd | genuineintel)
+	    EM64T | authenticamd)
 		echo x86_64-unknown-interix${UNAME_RELEASE}
 		exit ;;
-	    IA64)
-		echo ia64-unknown-interix${UNAME_RELEASE}
-		exit ;;
 	esac ;;
     [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
 	echo i${UNAME_MACHINE}-pc-mks
@@ -849,14 +833,7 @@ EOF
 	echo ${UNAME_MACHINE}-pc-minix
 	exit ;;
     arm*:Linux:*:*)
-	eval $set_cc_for_build
-	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
-	    | grep -q __ARM_EABI__
-	then
-	    echo ${UNAME_MACHINE}-unknown-linux-gnu
-	else
-	    echo ${UNAME_MACHINE}-unknown-linux-gnueabi
-	fi
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     avr32*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
@@ -948,9 +925,6 @@ EOF
 	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
 	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
 	exit ;;
-    padre:Linux:*:*)
-	echo sparc-unknown-linux-gnu
-	exit ;;
     parisc:Linux:*:* | hppa:Linux:*:*)
 	# Look for CPU level
 	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
@@ -980,8 +954,8 @@ EOF
     x86_64:Linux:*:*)
 	echo x86_64-unknown-linux-gnu
 	exit ;;
-    xtensa*:Linux:*:*)
-    	echo ${UNAME_MACHINE}-unknown-linux-gnu
+    xtensa:Linux:*:*)
+    	echo xtensa-unknown-linux-gnu
 	exit ;;
     i*86:Linux:*:*)
 	# The BFD linker knows what the default object file format is, so
@@ -1001,6 +975,9 @@ EOF
 	  a.out-i386-linux)
 		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
 		exit ;;
+	  coff-i386)
+		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
+		exit ;;
 	  "")
 		# Either a pre-BFD a.out linker (linux-gnuoldld) or
 		# one that does not give us useful --help.
@@ -1154,16 +1131,6 @@ EOF
     3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
         /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
           && { echo i486-ncr-sysv4; exit; } ;;
-    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
-	OS_REL='.3'
-	test -r /etc/.relid \
-	    && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
-	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-	    && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
-	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
-	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
-	/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
-	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
     m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
 	echo m68k-unknown-lynxos${UNAME_RELEASE}
 	exit ;;
@@ -1239,9 +1206,6 @@ EOF
     BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
 	echo i586-pc-beos
 	exit ;;
-    BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
-	echo i586-pc-haiku
-	exit ;;
     SX-4:SUPER-UX:*:*)
 	echo sx4-nec-superux${UNAME_RELEASE}
 	exit ;;
@@ -1350,9 +1314,6 @@ EOF
     i*86:rdos:*:*)
 	echo ${UNAME_MACHINE}-pc-rdos
 	exit ;;
-    i*86:AROS:*:*)
-	echo ${UNAME_MACHINE}-pc-aros
-	exit ;;
 esac
 
 #echo '(No uname command or uname output not recognized.)' 1>&2
@@ -1513,9 +1474,9 @@ This script, last modified $timestamp, has failed to recognize
 the operating system you are using. It is advised that you
 download the most up to date version of the config scripts from
 
-  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess
 and
-  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub
 
 If the version you run ($0) is already up to date, please
 send the following data and any information you think might be

bin/config.sub

@@ -1,10 +1,10 @@
 #! /bin/sh
 # Configuration validation subroutine script.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
-#   Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
+#   Inc.
 
-timestamp='2009-02-03'
+timestamp='2007-06-28'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -72,8 +72,8 @@ Report bugs and patches to <config-patches@gnu.org>."
 version="\
 GNU config.sub ($timestamp)
 
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -122,7 +122,6 @@ maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
   nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
   uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
-  kopensolaris*-gnu* | \
   storm-chaos* | os2-emx* | rtmk-nova*)
     os=-$maybe_os
     basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
@@ -250,16 +249,13 @@ case $basic_machine in
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
 	| i370 | i860 | i960 | ia64 \
 	| ip2k | iq2000 \
-	| lm32 \
 	| m32c | m32r | m32rle | m68000 | m68k | m88k \
-	| maxq | mb | microblaze | mcore | mep | metag \
+	| maxq | mb | microblaze | mcore | mep \
 	| mips | mipsbe | mipseb | mipsel | mipsle \
 	| mips16 \
 	| mips64 | mips64el \
-	| mips64octeon | mips64octeonel \
-	| mips64orion | mips64orionel \
-	| mips64r5900 | mips64r5900el \
 	| mips64vr | mips64vrel \
+	| mips64orion | mips64orionel \
 	| mips64vr4100 | mips64vr4100el \
 	| mips64vr4300 | mips64vr4300el \
 	| mips64vr5000 | mips64vr5000el \
@@ -281,7 +277,7 @@ case $basic_machine in
 	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
 	| pyramid \
 	| score \
-	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
 	| sh64 | sh64le \
 	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
 	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
@@ -290,7 +286,7 @@ case $basic_machine in
 	| v850 | v850e \
 	| we32k \
 	| x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
-	| z8k | z80)
+	| z8k)
 		basic_machine=$basic_machine-unknown
 		;;
 	m6811 | m68hc11 | m6812 | m68hc12)
@@ -333,17 +329,14 @@ case $basic_machine in
 	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
 	| i*86-* | i860-* | i960-* | ia64-* \
 	| ip2k-* | iq2000-* \
-	| lm32-* \
 	| m32c-* | m32r-* | m32rle-* \
 	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* \
 	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
 	| mips16-* \
 	| mips64-* | mips64el-* \
-	| mips64octeon-* | mips64octeonel-* \
-	| mips64orion-* | mips64orionel-* \
-	| mips64r5900-* | mips64r5900el-* \
 	| mips64vr-* | mips64vrel-* \
+	| mips64orion-* | mips64orionel-* \
 	| mips64vr4100-* | mips64vr4100el-* \
 	| mips64vr4300-* | mips64vr4300el-* \
 	| mips64vr5000-* | mips64vr5000el-* \
@@ -365,24 +358,20 @@ case $basic_machine in
 	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
 	| pyramid-* \
 	| romp-* | rs6000-* \
-	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
 	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
 	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
 	| sparclite-* \
 	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
 	| tahoe-* | thumb-* \
-	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \
+	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
 	| tron-* \
 	| v850-* | v850e-* | vax-* \
 	| we32k-* \
 	| x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
-	| xstormy16-* | xtensa*-* \
+	| xstormy16-* | xtensa-* \
 	| ymp-* \
-	| z8k-* | z80-*)
-		;;
-	# Recognize the basic CPU types without company name, with glob match.
-	xtensa*)
-		basic_machine=$basic_machine-unknown
+	| z8k-*)
 		;;
 	# Recognize the various machine names and aliases which stand
 	# for a CPU type and a company and sometimes even an OS.
@@ -446,10 +435,6 @@ case $basic_machine in
 		basic_machine=m68k-apollo
 		os=-bsd
 		;;
-	aros)
-		basic_machine=i386-pc
-		os=-aros
-		;;
 	aux)
 		basic_machine=m68k-apple
 		os=-aux
@@ -458,22 +443,10 @@ case $basic_machine in
 		basic_machine=ns32k-sequent
 		os=-dynix
 		;;
-	blackfin)
-		basic_machine=bfin-unknown
-		os=-linux
-		;;
-	blackfin-*)
-		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
-		os=-linux
-		;;
 	c90)
 		basic_machine=c90-cray
 		os=-unicos
 		;;
-        cegcc)
-		basic_machine=arm-unknown
-		os=-cegcc
-		;;
 	convex-c1)
 		basic_machine=c1-convex
 		os=-bsd
@@ -541,10 +514,6 @@ case $basic_machine in
 		basic_machine=m88k-motorola
 		os=-sysv3
 		;;
-	dicos)
-		basic_machine=i686-pc
-		os=-dicos
-		;;
 	djgpp)
 		basic_machine=i586-pc
 		os=-msdosdjgpp
@@ -699,14 +668,6 @@ case $basic_machine in
 		basic_machine=m68k-isi
 		os=-sysv
 		;;
-	m68knommu)
-		basic_machine=m68k-unknown
-		os=-linux
-		;;
-	m68knommu-*)
-		basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
-		os=-linux
-		;;
 	m88k-omron*)
 		basic_machine=m88k-omron
 		;;
@@ -852,14 +813,6 @@ case $basic_machine in
 		basic_machine=i860-intel
 		os=-osf
 		;;
-	parisc)
-		basic_machine=hppa-unknown
-		os=-linux
-		;;
-	parisc-*)
-		basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
-		os=-linux
-		;;
 	pbd)
 		basic_machine=sparc-tti
 		;;
@@ -1068,10 +1021,6 @@ case $basic_machine in
 		basic_machine=tic6x-unknown
 		os=-coff
 		;;
-	tile*)
-		basic_machine=tile-unknown
-		os=-linux-gnu
-		;;
 	tx39)
 		basic_machine=mipstx39-unknown
 		;;
@@ -1147,10 +1096,6 @@ case $basic_machine in
 		basic_machine=z8k-unknown
 		os=-sim
 		;;
-	z80-*-coff)
-		basic_machine=z80-unknown
-		os=-sim
-		;;
 	none)
 		basic_machine=none-none
 		os=-none
@@ -1189,7 +1134,7 @@ case $basic_machine in
 	we32k)
 		basic_machine=we32k-att
 		;;
-	sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
+	sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
 		basic_machine=sh-unknown
 		;;
 	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
@@ -1261,9 +1206,8 @@ case $os in
 	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
 	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
 	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
-	      | -kopensolaris* \
 	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
-	      | -aos* | -aros* \
+	      | -aos* \
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
 	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
@@ -1272,7 +1216,7 @@ case $os in
 	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
-	      | -chorusos* | -chorusrdb* | -cegcc* \
+	      | -chorusos* | -chorusrdb* \
 	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
 	      | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
 	      | -uxpv* | -beos* | -mpeix* | -udk* \
@@ -1412,9 +1356,6 @@ case $os in
 	-zvmoe)
 		os=-zvmoe
 		;;
-	-dicos*)
-		os=-dicos
-		;;
 	-none)
 		;;
 	*)

bin/minstall

@@ -66,11 +66,8 @@ if [ $# -ge 2 ] ; then
 
 		elif [ -f "$FILE" ] ; then
 			#echo "$FILE" is a regular file
-			# Only copy if the files differ
-			if ! cmp -s $FILE $DEST/`basename $FILE`; then
-				$RM "$DEST/`basename $FILE`"
-				cp "$FILE" "$DEST"
-			fi
+			$RM "$DEST/`basename $FILE`"
+			cp "$FILE" "$DEST"
 			if [ $MODE ] ; then
 				FILE=`basename "$FILE"`
 				chmod $MODE "$DEST/$FILE"

bin/mklib

@@ -25,109 +25,6 @@
 # CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 
 
-# Clear CDPATH as the 'cd' command will echo stuff
-# to stdout if it is set
-unset CDPATH
-
-# Given a list of files, look for .a archives and unpack them.
-# Return the original list of files minus the .a files plus the unpacked files.
-# first param:  name of a temp directory (to be deleted when finished)
-# remaining params:  list of .o and .a files
-expand_archives() {
-    DIR=$1
-    shift
-    FILES=$@
-    NEWFILES=""
-    ORIG_DIR=`pwd`
-    mkdir -p "$DIR"
-    cd "$DIR"
-    for FILE in $FILES ; do
-        case $FILE in
-            *.a)
-                # extract the .o files from this .a archive
-                case $FILE in
-                    /*) ;;
-                    *)  FILE="$ORIG_DIR/$FILE" ;;
-                esac
-                MEMBERS=`ar t $FILE`
-                ar x $FILE
-                for MEMBER in $MEMBERS ; do
-                    NEWFILES="$NEWFILES $DIR/$MEMBER"
-                done
-                ;;
-            *)
-                # other file type, just add to list
-                NEWFILES="$NEWFILES $FILE"
-                ;;
-        esac
-    done
-    cd "$ORIG_DIR"
-    echo $NEWFILES
-}
-
-
-# Make static library with 'ar'
-# params:
-#    options to ar
-#    1 or 0 to indicate if ranlib should be run
-#    libname to make
-#    list of object files
-# Return name of library we made
-# Example: "make_ar_static_lib -ru 1 libfoo.a foo.o bar.o"
-make_ar_static_lib() {
-    OPTS=$1
-    shift;
-    RANLIB=$1
-    shift;
-    LIBNAME=$1
-    shift;
-    OBJECTS=$@
-
-    # remove existing lib, if present
-    rm -f ${LIBNAME}
-
-    # make static lib
-    ar ${OPTS} ${LIBNAME} ${OBJECTS}
-
-    # run ranlib
-    if [ ${RANLIB} = 1 ] ; then
-        ranlib ${LIBNAME}
-    fi
-
-    echo ${LIBNAME}
-}
-
-
-# Print usage info.
-usage() {
-    echo 'Usage: mklib [options] objects'
-    echo 'Create a shared library from object files.'
-    echo '  -o LIBRARY    specifies the name of the resulting library, without'
-    echo '                the leading "lib" or any suffix.'
-    echo '                (eg: "-o GL" might result in "libGL.so" being made)'
-    echo '  -major N      specifies major version number (default is 1)'
-    echo '  -minor N      specifies minor version number (default is 0)'
-    echo '  -patch N      specifies patch version number (default is 0)'
-    echo '  -lLIBRARY     specifies a dependency on LIBRARY'
-    echo '  -LDIR         search in DIR for library dependencies at build time'
-    echo '  -RDIR         search in DIR for library dependencies at run time'
-    echo '  -linker L     explicity specify the linker program to use (eg: gcc, g++)'
-    echo '                Not observed on all systems at this time.'
-    echo '  -ldflags OPT  specify any additional linker flags in OPT'
-    echo '  -cplusplus    link with C++ runtime'
-    echo '  -static       make a static library (default is dynamic/shared)'
-    echo '  -dlopen       make a shared library suitable for dynamic loading'
-    echo '  -install DIR  put resulting library file(s) in DIR'
-    echo '  -arch ARCH    override using `uname` to determine host system'
-    echo '  -archopt OPT  specify an extra achitecture-specific option OPT'
-    echo '  -altopts OPTS alternate options to override all others'
-    echo "  -noprefix     don't prefix library name with 'lib' nor add any suffix"
-    echo '  -exports FILE only export the symbols listed in FILE'
-    echo '  -id NAME      Sets the id of the dylib (Darwin)'
-    echo '  -h, --help    display this information and exit'
-}
-
-
 #
 # Option defaults
 #
@@ -155,7 +52,31 @@ while true
 do
     case $1 in
 	'-h' | '--help')
-	    usage
+	    echo 'Usage: mklib [options] objects'
+	    echo 'Create a shared library from object files.'
+	    echo '  -o LIBRARY    specifies the name of the resulting library, without'
+	    echo '                the leading "lib" or any suffix.'
+	    echo '                (eg: "-o GL" might result in "libGL.so" being made)'
+	    echo '  -major N      specifies major version number (default is 1)'
+	    echo '  -minor N      specifies minor version number (default is 0)'
+	    echo '  -patch N      specifies patch version number (default is 0)'
+	    echo '  -lLIBRARY     specifies a dependency on LIBRARY'
+	    echo '  -LDIR         search in DIR for library dependencies at build time'
+	    echo '  -RDIR         search in DIR for library dependencies at run time'
+	    echo '  -linker L     explicity specify the linker program to use (eg: gcc, g++)'
+	    echo '                Not observed on all systems at this time.'
+	    echo '  -ldflags OPT  specify any additional linker flags in OPT'
+	    echo '  -cplusplus    link with C++ runtime'
+	    echo '  -static       make a static library (default is dynamic/shared)'
+	    echo '  -dlopen       make a shared library suitable for dynamic loading'
+	    echo '  -install DIR  put resulting library file(s) in DIR'
+	    echo '  -arch ARCH    override using `uname` to determine host system'
+	    echo '  -archopt OPT  specify an extra achitecture-specific option OPT'
+	    echo '  -altopts OPTS alternate options to override all others'
+	    echo "  -noprefix     don't prefix library name with 'lib' nor add any suffix"
+	    echo '  -exports FILE only export the symbols listed in FILE'
+	    echo '  -id NAME      Sets the id of the dylib (Darwin)'
+	    echo '  -h, --help    display this information and exit'
 	    exit 1
 	    ;;
 	'-o')
@@ -255,32 +176,15 @@ if [ ${ARCH} = "auto" ] ; then
 fi
 
 
-if [ $STATIC = 1 ]; then
-    # filter out linker options inside object list
-    NEWOBJECTS=""
-    for OBJ in $OBJECTS ; do
-	case $OBJ in
-	    -Wl,*)
-		echo "mklib: warning: ignoring $OBJ for static library"
-		;;
-	    *)
-		NEWOBJECTS="$NEWOBJECTS $OBJ"
-		;;
-	esac
-    done
-    OBJECTS=$NEWOBJECTS
-fi
-
-
 #
 # Error checking
 #
 if [ "x${LIBNAME}" = "x" ] ; then
-    echo "mklib: Error: no library name specified (-h for help)"
+    echo "mklib: Error: no library name specified"
     exit 1
 fi
 if [ "x${OBJECTS}" = "x" ] ; then
-    echo "mklib: Error: no object files specified (-h for help)"
+    echo "mklib: Error: no object files specified"
     exit 1
 fi
 
@@ -348,24 +252,42 @@ case $ARCH in
             # finish up
             FINAL_LIBS="${LIBNAME}"
         elif [ $STATIC = 1 ] ; then
-	    # make a static .a library
             LIBNAME="lib${LIBNAME}.a"     # prefix with "lib", suffix with ".a"
             echo "mklib: Making" $ARCH "static library: " ${LIBNAME}
+            LINK="ar"
             OPTS="-ru"
             if [ "${ALTOPTS}" ] ; then
                 OPTS=${ALTOPTS}
             fi
+            rm -f ${LIBNAME}
 
-	    # expand .a into .o files
-	    NEW_OBJECTS=`expand_archives ${LIBNAME}.obj $OBJECTS`
+	    # expand any .a objects into constituent .o files.
+	    NEWOBJECTS=""
+	    DELETIA=""
+	    for OBJ in ${OBJECTS} ; do
+		if [ `expr match $OBJ '.*\.a'` -gt 0 ] ; then
+		    # extract the .o files from this .a archive
+		    FILES=`ar t $OBJ`
+		    ar x $OBJ
+		    NEWOBJECTS="$NEWOBJECTS $FILES"
+		    # keep track of temporary .o files and delete them below
+		    DELETIA="$DELETIA $FILES"
+		else
+		    # ordinary .o file
+		    NEWOBJECTS="$NEWOBJECTS $OBJ"
+		fi
+	    done
 
-            # make static lib
-	    FINAL_LIBS=`make_ar_static_lib ${OPTS} 1 ${LIBNAME} ${NEW_OBJECTS}`
+            # make lib
+            ${LINK} ${OPTS} ${LIBNAME} ${NEWOBJECTS}
+            ranlib ${LIBNAME}
 
 	    # remove temporary extracted .o files
-	    rm -rf ${LIBNAME}.obj
+	    rm -f ${DELETIA}
+
+            # finish up
+            FINAL_LIBS=${LIBNAME}
         else
-	    # make dynamic library
 	    LIBNAME="lib${LIBNAME}"     # prefix with "lib"
 	    case $ARCH in 'Linux' | 'GNU' | GNU/*)
 		OPTS="-Xlinker -Bsymbolic -shared -Wl,-soname,${LIBNAME}.so.${MAJOR}"
@@ -426,7 +348,9 @@ case $ARCH in
         if [ $STATIC = 1 ] ; then
 	    LIBNAME="lib${LIBNAME}.a"
 	    echo "mklib: Making SunOS static library: " ${LIBNAME}
-	    FINAL_LIBS=`make_ar_static_lib -ruc 0 ${LIBNAME} ${OBJECTS}`
+	    rm -f ${LIBNAME}
+	    ar -ruv ${LIBNAME} ${OBJECTS}
+	    FINAL_LIBS=${LIBNAME}
 	else
 	    if [ $NOPREFIX = 0 ] ; then
 		LIBNAME="lib${LIBNAME}.so"
@@ -545,19 +469,13 @@ case $ARCH in
 	    ${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
 	    FINAL_LIBS=${LIBNAME}
         elif [ $STATIC = 1 ] ; then
-	    # make a static .a library
 	    STLIB="lib${LIBNAME}.a"
 	    echo "mklib: Making FreeBSD static library: " ${STLIB}
-
-	    # expand .a into .o files
-	    NEW_OBJECTS=`expand_archives ${STLIB}.obj $OBJECTS`
-
-	    FINAL_LIBS=`make_ar_static_lib cq 1 ${STLIB} ${NEW_OBJECTS}`
-
-	    # remove temporary extracted .o files
-	    rm -rf ${STLIB}.obj
+	    rm -f ${STLIB}
+	    ar cq ${STLIB} ${OBJECTS}
+	    ranlib ${STLIB}
+	    FINAL_LIBS=${STLIB}
 	else
-	    # make dynamic library
 	    SHLIB="lib${LIBNAME}.so.${MAJOR}"
 	    OPTS="-shared -Wl,-soname,${SHLIB}"
             if [ "${ALTOPTS}" ] ; then
@@ -575,7 +493,10 @@ case $ARCH in
         if [ $STATIC = 1 ] ; then
 	    LIBNAME="lib${LIBNAME}_pic.a"
 	    echo "mklib: Making NetBSD PIC static library: " ${LIBNAME}
-	    FINAL_LIBS=`make_ar_static_lib cq 1 ${LIBNAME} ${OBJECTS}`
+	    rm -f ${LIBNAME}
+	    ar cq ${LIBNAME} ${OBJECTS}
+	    ranlib ${LIBNAME}
+	    FINAL_LIBS=${LIBNAME}
 	else
 	    LIBNAME="lib${LIBNAME}.so.${MAJOR}.${MINOR}"
 	    echo "mklib: Making NetBSD PIC shared library: " ${LIBNAME}
@@ -588,7 +509,9 @@ case $ARCH in
     'IRIX' | 'IRIX64')
         if [ $STATIC = 1 ] ; then
 	    LIBNAME="lib${LIBNAME}.a"
-	    FINAL_LIBS=`make_ar_static_lib rc 0 ${LIBNAME} ${OBJECTS}`
+	    rm -f ${LIBNAME}
+	    ar rc ${LIBNAME} ${OBJECTS}
+	    FINAL_LIBS=${LIBNAME}
 	else
 	    LIBNAME="lib${LIBNAME}.so"  # prefix with "lib", suffix with ".so"
 
@@ -639,7 +562,9 @@ case $ARCH in
         if [ $STATIC = 1 ] ; then
 	    LIBNAME="lib${LIBNAME}.a"
 	    echo "mklib: Making HP-UX static library: " ${LIBNAME}
-    	    FINAL_LIBS=`make_ar_static_lib -ruv 0 ${LIBNAME} ${OBJECTS}`
+	    rm -f ${LIBNAME}
+	    ar -ruv ${LIBNAME} ${OBJECTS}
+	    FINAL_LIBS=${LIBNAME}
 	else
             # HP uses a .2 for their current GL/GLU libraries
 	    if [ ${LIBNAME} = "GL" -o ${LIBNAME} = "GLU" ] ; then
@@ -669,7 +594,8 @@ case $ARCH in
 	if [ $STATIC = 1 ] ; then
 	    LIBNAME="lib${LIBNAME}.a"
 	    echo "mklib: Making AIX static library: " ${LIBNAME}
-    	    FINAL_LIBS=`make_ar_static_lib -ruv 0 ${LIBNAME} ${OBJECTS}`
+	    ar -ruv ${X64} ${LIBNAME} ${OBJECTS}
+	    FINAL_LIBS=${LIBNAME}
 	else
 	    EXPFILE="lib${LIBNAME}.exp"
 	    LIBNAME="lib${LIBNAME}.a"  # shared objects are still stored in the .a libraries
@@ -720,7 +646,9 @@ case $ARCH in
         if [ $STATIC = 1 ] ; then
 	    LIBNAME="lib${LIBNAME}.a"
 	    echo "mklib: Making OSF/1 static library: " ${LIBNAME}
-    	    FINAL_LIBS=`make_ar_static_lib -ruv 0 ${LIBNAME} ${OBJECTS}`
+	    rm -f ${LIBNAME}
+	    ar -ruv ${LIBNAME} ${OBJECTS}
+	    FINAL_LIBS=${LIBNAME}
 	else
 	    VERSION="${MAJOR}.${MINOR}"
 	    LIBNAME="lib${LIBNAME}.so"
@@ -743,20 +671,12 @@ case $ARCH in
         if [ $STATIC = 1 ] ; then
             LIBNAME="lib${LIBNAME}.a"
             echo "mklib: Making Darwin static library: " ${LIBNAME}
+            LINK="ar"
             OPTS="-ruvs"
             if [ "${ALTOPTS}" ] ; then
                 OPTS=${ALTOPTS}
             fi
-
-            # expand .a into .o files
-            NEW_OBJECTS=`expand_archives ${LIBNAME}.obj $OBJECTS`
-
-            # make static lib
-            FINAL_LIBS=`make_ar_static_lib ${OPTS} 1 ${LIBNAME} ${NEW_OBJECTS}`
-
-            # remove temporary extracted .o files
-            rm -rf ${LIBNAME}.obj
-
+            ${LINK} ${OPTS} ${LIBNAME} ${OBJECTS}
             FINAL_LIBS=${LIBNAME}
         else
             # On Darwin a .bundle is used for a library that you want to dlopen
@@ -784,10 +704,22 @@ case $ARCH in
 
 	    # examine first object to determine ABI
     	    set ${OBJECTS}
-            ABIS=`lipo -info $1 | sed s/.*://`
-            for ABI in $ABIS; do
-                OPTS="${OPTS} -arch ${ABI}"
-            done
+            ABI_PPC=`file $1 | grep ' ppc'`
+            ABI_I386=`file $1 | grep ' i386'`
+            ABI_PPC64=`file $1 | grep ' ppc64'`
+            ABI_X86_64=`file $1 | grep ' x86_64'`
+            if [ "${ABI_PPC}" ] ; then
+                OPTS="${OPTS} -arch ppc"
+            fi
+            if [ "${ABI_I386}" ] ; then
+                OPTS="${OPTS} -arch i386"
+            fi
+            if [ "${ABI_PPC64}" ] ; then
+                OPTS="${OPTS} -arch ppc64"
+            fi
+            if [ "${ABI_X86_64}" ] ; then
+                OPTS="${OPTS} -arch x86_64"
+            fi
 
             if [ "${ALTOPTS}" ] ; then
                 OPTS=${ALTOPTS}
@@ -815,14 +747,16 @@ case $ARCH in
     'LynxOS')
 	LIBNAME="lib${LIBNAME}.a"
 	echo "mklib: Making LynxOS static library: " ${LIBNAME}
-        FINAL_LIBS=`make_ar_static_lib -ru 0 ${LIBNAME} ${OBJECTS}`
+	rm -f ${LIBNAME}
+	ar ru ${LIBNAME} ${OBJECTS}
+	FINAL_LIBS=${LIBNAME}
 	;;
 
     'BeOS')
         if [ $STATIC = 1 ] ; then
             LIBNAME="lib${LIBNAME}.a"
             echo "mklib: Making BeOS static library: " ${LIBNAME}
-            FINAL_LIBS=`make_ar_static_lib -cru 0 ${LIBNAME} ${OBJECTS}`
+            ar -cru "${LIBNAME}" ${OBJECTS}
         else
 	    LIBNAME="lib${LIBNAME}.so"
 	    echo "mklib: Making BeOS shared library: " ${LIBNAME}
@@ -901,7 +835,9 @@ case $ARCH in
         if [ $STATIC = 1 ] ; then
 	    LIBNAME="lib${LIBNAME}.a"
 	    echo "mklib: Making AIX GCC static library: " ${LIBNAME}
-            FINAL_LIBS=`make_ar_static_lib ru 0 ${LIBNAME} ${OBJECTS}`
+	    rm -f ${LIBNAME}
+	    ar ru ${LIBNAME} ${OBJECTS}
+	    FINAL_LIBS=${LIBNAME}
 	else
 	    LIBNAME="lib${LIBNAME}.so"  # prefix with "lib", suffix with ".so"
 	    echo "mklib: Making AIX GCC shared library: " ${LIBNAME}
@@ -922,46 +858,34 @@ case $ARCH in
 	fi
 	LIBNAME="lib${LIBNAME}.a"
 	echo "mklib: Making static library for Ultrix: " ${LIBNAME}
-        FINAL_LIBS=`make_ar_static_lib ru 0 ${LIBNAME} ${OBJECTS}`
+	rm -f ${LIBNAME}
+	ar ru ${LIBNAME} ${OBJECTS}
+	FINAL_LIBS="${LIBNAME}"
 	;;
 
      CYGWIN*)
 	# GCC-based environment
-	if [ $NOPREFIX = 1 ] ; then
-	    # No "lib" or ".so" part
-	    echo "mklib: Making CYGWIN shared library: " ${LIBNAME}
-	    OPTS="-shared -Wl,--enable-auto-image-base"
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
-	    rm -f ${LIBNAME}
-	    ${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
-	    FINAL_LIBS=${LIBNAME}
-        else
 	CYGNAME="cyg${LIBNAME}"     # prefix with "cyg"
 	LIBNAME="lib${LIBNAME}"     # prefix with "lib"
 
         if [ $STATIC = 1 ] ; then
-	    LIBNAME=${LIBNAME}.a
-            echo "mklib: Making" $ARCH "static library: " ${LIBNAME}
+            echo "mklib: Making" $ARCH "static library: " ${LIBNAME}.a
+            LINK="ar"
             OPTS="-ru"
             if [ "${ALTOPTS}" ] ; then
                 OPTS=${ALTOPTS}
             fi
-
-            # expand .a into .o files
-            NEW_OBJECTS=`expand_archives ${LIBNAME}.obj $OBJECTS`
-
-            FINAL_LIBS=`make_ar_static_lib ${OPTS} 1 ${LIBNAME} ${NEW_OBJECTS}`
-
-            # remove temporary extracted .o files
-            rm -rf ${LIBNAME}.obj
+            # make lib
+            ${LINK} ${OPTS} ${LIBNAME}.a ${OBJECTS}
+	    ranlib ${LIBNAME}.a
+            # finish up
+            FINAL_LIBS=${LIBNAME}.a
         else
-	    OPTS="-shared -Wl,--enable-auto-image-base -Wl,-export-all -Wl,--out-implib=${LIBNAME}-${MAJOR}.dll.a"
+	    OPTS="-shared -Wl,-export-all -Wl,--out-implib=${LIBNAME}-${MAJOR}.dll.a"
             if [ "${ALTOPTS}" ] ; then
                 OPTS=${ALTOPTS}
             fi
-            echo "mklib: Making" $ARCH "shared library: " ${CYGNAME}-${MAJOR}.dll
+            echo "mklib: Making" $ARCH "shared library: " ${LIBNAME}-${MAJOR}.dll
 
             if [ $CPLUSPLUS = 1 ] ; then
                 LINK="g++"
@@ -970,18 +894,12 @@ case $ARCH in
             fi
 
             # rm any old libs
-            rm -f ${CYGNAME}-${MAJOR}.dll
-            rm -f ${LIBNAME}-${MAJOR}.dll.a
+            rm -f ${LIBNAME}-${MAJOR}.dll
             rm -f ${LIBNAME}.dll.a
             rm -f ${LIBNAME}.a
 
             # make lib
             ${LINK} ${OPTS} ${LDFLAGS} -o ${CYGNAME}-${MAJOR}.dll ${OBJECTS} ${DEPS}
-            # make build fail if link failed
-            es=$?
-            if [ "$es" -ne "0" ]; then
-                exit $es
-            fi
             # make usual symlinks
             ln -s ${LIBNAME}-${MAJOR}.dll.a ${LIBNAME}.dll.a
             # finish up
@@ -989,7 +907,6 @@ case $ARCH in
 	    # special case for installing in bin
             FINAL_BINS="${CYGNAME}-${MAJOR}.dll"
         fi
-        fi
 	;;
 
     'example')
@@ -998,7 +915,9 @@ case $ARCH in
         if [ $STATIC = 1 ] ; then
 	    LIBNAME="lib${LIBNAME}.a"
 	    echo "mklib: Making static library for example arch: " ${LIBNAME}
-            FINAL_LIBS=`make_ar_static_lib rv 0 ${LIBNAME} ${OBJECTS}`
+	    rm -f ${LIBNAME}
+	    ar rv ${LIBNAME} ${OBJECTS}
+	    FINAL_LIBS="${LIBNAME}"
 	else
 	    LIBNAME="lib${LIBNAME}.so"  # prefix with "lib", suffix with ".so"
 	    echo "mklib: Making shared library for example arch: " ${LIBNAME}
@@ -1019,6 +938,5 @@ esac
 #
 if [ ${INSTALLDIR} != "." ] ; then
     echo "mklib: Installing" ${FINAL_LIBS} "in" ${INSTALLDIR}
-    test -d ${INSTALLDIR} || mkdir -p ${INSTALLDIR}
     mv ${FINAL_LIBS} ${INSTALLDIR}/
 fi

common.py

@@ -1,66 +0,0 @@
-#######################################################################
-# Common SCons code
-
-import os
-import os.path
-import sys
-import platform as _platform
-
-
-#######################################################################
-# Defaults
-
-_platform_map = {
-	'linux2': 'linux',
-	'win32': 'windows',
-}
-
-default_platform = sys.platform
-default_platform = _platform_map.get(default_platform, default_platform)
-
-_machine_map = {
-	'x86': 'x86',
-	'i386': 'x86',
-	'i486': 'x86',
-	'i586': 'x86',
-	'i686': 'x86',
-	'ppc' : 'ppc',
-	'x86_64': 'x86_64',
-}
-if 'PROCESSOR_ARCHITECTURE' in os.environ:
-	default_machine = os.environ['PROCESSOR_ARCHITECTURE']
-else:
-	default_machine = _platform.machine()
-default_machine = _machine_map.get(default_machine, 'generic')
-
-if default_platform in ('linux', 'freebsd'):
-	default_dri = 'yes'
-elif default_platform in ('winddk', 'windows', 'wince', 'darwin'):
-	default_dri = 'no'
-else:
-	default_dri = 'no'
-
-
-#######################################################################
-# Common options
-
-def AddOptions(opts):
-	try:
-		from SCons.Variables.BoolVariable import BoolVariable as BoolOption
-	except ImportError:
-		from SCons.Options.BoolOption import BoolOption
-	try:
-		from SCons.Variables.EnumVariable import EnumVariable as EnumOption
-	except ImportError:
-		from SCons.Options.EnumOption import EnumOption
-	opts.Add(BoolOption('debug', 'debug build', 'no'))
-	opts.Add(BoolOption('profile', 'profile build', 'no'))
-	opts.Add(BoolOption('quiet', 'quiet command lines', 'yes'))
-	opts.Add(EnumOption('machine', 'use machine-specific assembly code', default_machine,
-											 allowed_values=('generic', 'ppc', 'x86', 'x86_64')))
-	opts.Add(EnumOption('platform', 'target platform', default_platform,
-											 allowed_values=('linux', 'cell', 'windows', 'winddk', 'wince', 'darwin', 'embedded')))
-	opts.Add(EnumOption('toolchain', 'compiler toolchain', 'default',
-											 allowed_values=('default', 'crossmingw', 'winsdk', 'winddk')))
-	opts.Add(BoolOption('llvm', 'use LLVM', 'no'))
-	opts.Add(BoolOption('dri', 'build DRI drivers', default_dri))

configs/autoconf.in

@@ -20,16 +20,10 @@ CXXFLAGS = @CPPFLAGS@ @CXXFLAGS@ \
 	$(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
 LDFLAGS = @LDFLAGS@
 EXTRA_LIB_PATH = @EXTRA_LIB_PATH@
-RADEON_CFLAGS = @RADEON_CFLAGS@
-RADEON_LDFLAGS = @RADEON_LDFLAGS@
-INTEL_LIBS = @INTEL_LIBS@
-INTEL_CFLAGS = @INTEL_CFLAGS@
-X11_LIBS = @X11_LIBS@
-X11_CFLAGS = @X11_CFLAGS@
 
 # Assembler
-MESA_ASM_SOURCES = @MESA_ASM_SOURCES@
-GLAPI_ASM_SOURCES = @GLAPI_ASM_SOURCES@
+ASM_SOURCES = @ASM_SOURCES@
+ASM_API = @ASM_API@
 
 # Misc tools and flags
 MAKE = @MAKE@
@@ -37,7 +31,6 @@ SHELL = @SHELL@
 MKLIB_OPTIONS = @MKLIB_OPTIONS@
 MKDEP = @MKDEP@
 MKDEP_OPTIONS = @MKDEP_OPTIONS@
-INSTALL = @INSTALL@
 
 # Python and flags (generally only needed by the developers)
 PYTHON2 = python
@@ -56,37 +49,19 @@ GLU_LIB_NAME = @GLU_LIB_NAME@
 GLUT_LIB_NAME = @GLUT_LIB_NAME@
 GLW_LIB_NAME = @GLW_LIB_NAME@
 OSMESA_LIB_NAME = @OSMESA_LIB_NAME@
-EGL_LIB_NAME = @EGL_LIB_NAME@
-
-# Globs used to install the lib and all symlinks
-GL_LIB_GLOB = @GL_LIB_GLOB@
-GLU_LIB_GLOB = @GLU_LIB_GLOB@
-GLUT_LIB_GLOB = @GLUT_LIB_GLOB@
-GLW_LIB_GLOB = @GLW_LIB_GLOB@
-OSMESA_LIB_GLOB = @OSMESA_LIB_GLOB@
-EGL_LIB_GLOB = @EGL_LIB_GLOB@
 
 # Directories to build
 LIB_DIR = @LIB_DIR@
 SRC_DIRS = @SRC_DIRS@
 GLU_DIRS = @GLU_DIRS@
 DRIVER_DIRS = @DRIVER_DIRS@
-EGL_DRIVERS_DIRS = @EGL_DRIVERS_DIRS@
-GALLIUM_DIRS = @GALLIUM_DIRS@
-GALLIUM_DRIVERS_DIRS = @GALLIUM_DRIVERS_DIRS@
-GALLIUM_WINSYS_DIRS = @GALLIUM_WINSYS_DIRS@
-GALLIUM_WINSYS_DRM_DIRS = @GALLIUM_WINSYS_DRM_DIRS@
-GALLIUM_STATE_TRACKERS_DIRS = @GALLIUM_STATE_TRACKERS_DIRS@
-GALLIUM_AUXILIARIES = $(TOP)/src/gallium/auxiliary/libgallium.a
-GALLIUM_DRIVERS = $(foreach DIR,$(GALLIUM_DRIVERS_DIRS),$(TOP)/src/gallium/drivers/$(DIR)/lib$(DIR).a)
-
 # Which subdirs under $(TOP)/progs/ to enter:
 PROGRAM_DIRS = @PROGRAM_DIRS@
 
 # Driver specific build vars
-DRI_DIRS = @DRI_DIRS@ 
+DRI_DIRS = @DRI_DIRS@
 WINDOW_SYSTEM = @WINDOW_SYSTEM@
-EGL_DISPLAYS = @EGL_DISPLAYS@
+USING_EGL = @USING_EGL@
 
 # Dependencies
 X11_INCLUDES = @X11_INCLUDES@
@@ -99,7 +74,6 @@ MOTIF_CFLAGS = @MOTIF_CFLAGS@
 GL_LIB_DEPS = $(EXTRA_LIB_PATH) @GL_LIB_DEPS@
 OSMESA_LIB_DEPS = -L$(TOP)/$(LIB_DIR) @OSMESA_MESA_DEPS@ \
 	$(EXTRA_LIB_PATH) @OSMESA_LIB_DEPS@
-EGL_LIB_DEPS = $(EXTRA_LIB_PATH) @EGL_LIB_DEPS@
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) @GLU_MESA_DEPS@ \
 	$(EXTRA_LIB_PATH) @GLU_LIB_DEPS@
 GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) @GLUT_MESA_DEPS@ \
@@ -130,13 +104,7 @@ INSTALL_INC_DIR = $(includedir)
 DRI_DRIVER_INSTALL_DIR = @DRI_DRIVER_INSTALL_DIR@
 
 # Where libGL will look for DRI hardware drivers
-DRI_DRIVER_SEARCH_DIR = @DRI_DRIVER_SEARCH_DIR@
-
-# EGL driver install directory
-EGL_DRIVER_INSTALL_DIR = @EGL_DRIVER_INSTALL_DIR@
-
-# Xorg driver install directory (for xorg state-tracker)
-XORG_DRIVER_INSTALL_DIR = @XORG_DRIVER_INSTALL_DIR@
+DRI_DRIVER_SEARCH_DIR = $(DRI_DRIVER_INSTALL_DIR)
 
 # pkg-config substitutions
 GL_PC_REQ_PRIV = @GL_PC_REQ_PRIV@
@@ -155,6 +123,3 @@ GLW_PC_LIB_PRIV = @GLW_PC_LIB_PRIV@
 GLW_PC_CFLAGS = @GLW_PC_CFLAGS@
 OSMESA_PC_REQ = @OSMESA_PC_REQ@
 OSMESA_PC_LIB_PRIV = @OSMESA_PC_LIB_PRIV@
-
-EGL_DRI2_CFLAGS = @EGL_DRI2_CFLAGS@
-EGL_DRI2_LIBS = @EGL_DRI2_LIBS@

configs/beos

@@ -26,8 +26,8 @@ ifeq ($(CPU), x86)
 		-DUSE_3DNOW_ASM \
 		-DUSE_SSE_ASM
 	
-	MESA_ASM_SOURCES = $(X86_SOURCES)
-	GLAPI_ASM_SOURCES = $(X86_API)
+	ASM_SOURCES = $(X86_SOURCES)
+	ASM_API = $(X86_API)
 
 	CC = gcc
 	CXX = g++
@@ -90,7 +90,7 @@ else
 endif
 
 # Directories
-SRC_DIRS = gallium mesa glu glut/beos glew
+SRC_DIRS = mesa glu glut/beos
 GLU_DIRS = sgi
 DRIVER_DIRS = beos
 PROGRAM_DIRS = beos samples redbook demos tests

configs/darwin

@@ -6,26 +6,24 @@ CONFIG_NAME = darwin
 
 INSTALL_DIR = /usr/X11
 
-X11_DIR = $(INSTALL_DIR)
-
 # Compiler and flags
 CC = gcc
-CXX = g++
+CXX = gcc
 PIC_FLAGS = -fPIC
-DEFINES =  -D_DARWIN_C_SOURCE -DPTHREADS -D_GNU_SOURCE \
+DEFINES =  -D_DARWIN_C_SOURCE -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L \
+	   -D_BSD_SOURCE -D_SVID_SOURCE -D_GNU_SOURCE -DPTHREADS \
 	   -DGLX_ALIAS_UNSUPPORTED -DGLX_INDIRECT_RENDERING
 
-# -D_GNU_SOURCE          - for src/mesa/main ...
-# -DGLX_DIRECT_RENDERING - pulls in libdrm stuff in glx
+# -DGLX_DIRECT_RENDERING - pulls in libdrm stuff in glx/x11
 # -DGLX_USE_APPLEGL      - supposed to be used with GLX_DIRECT_RENDERING to use AGL rather than DRM, but doesn't compile
 # -DIN_DRI_DRIVER
 
 ARCH_FLAGS += $(RC_CFLAGS)
 
 CFLAGS =  -ggdb3 -Os -Wall -Wmissing-prototypes -std=c99 -ffast-math -fno-strict-aliasing \
-	-I$(INSTALL_DIR)/include -I$(X11_DIR)/include $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(ASM_FLAGS) $(DEFINES)
+	-I$(INSTALL_DIR)/include $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(ASM_FLAGS) $(DEFINES)
 CXXFLAGS =  -ggdb3 -Os -Wall -fno-strict-aliasing \
-	-I$(INSTALL_DIR)/include -I$(X11_DIR)/include $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(ASM_FLAGS) $(DEFINES)
+	-I$(INSTALL_DIR)/include $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(ASM_FLAGS) $(DEFINES)
 
 # Library names (actual file names)
 GL_LIB_NAME = libGL.dylib
@@ -41,15 +39,15 @@ GLUT_LIB_GLOB = libglut.*dylib
 GLW_LIB_GLOB = libGLw.*dylib
 OSMESA_LIB_GLOB = libOSMesa.*dylib
 
-GL_LIB_DEPS = -L$(INSTALL_DIR)/$(LIB_DIR) -L$(X11_DIR)/$(LIB_DIR) -lX11 -lXext -lm -lpthread
+GL_LIB_DEPS = -L$(INSTALL_DIR)/$(LIB_DIR) -lX11 -lXext -lm -lpthread
 OSMESA_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB)
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB)
-GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB)  -L$(INSTALL_DIR)/$(LIB_DIR) -L$(X11_DIR)/$(LIB_DIR) -lX11 -lXmu -lXi -lXext
-GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -L$(INSTALL_DIR)/$(LIB_DIR) -L$(X11_DIR)/$(LIB_DIR) -lX11 -lXt
-APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L$(INSTALL_DIR)/$(LIB_DIR) -L$(X11_DIR)/$(LIB_DIR) -lX11 -lXmu -lXt -lXi -lm
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB)  -L$(INSTALL_DIR)/$(LIB_DIR) -lX11 -lXmu -lXi -lXext
+GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -L$(INSTALL_DIR)/$(LIB_DIR) -lX11 -lXt
+APP_LIB_DEPS = -L$(TOP)/lib -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L$(INSTALL_DIR)/$(LIB_DIR) -lX11 -lXmu -lXt -lXi -lm
 
 # omit glw lib for now:
-SRC_DIRS = glsl glx mesa gallium glu glut/glx glew
+SRC_DIRS = glx/x11 mesa glu glut/glx
 GLU_DIRS = sgi
 DRIVER_DIRS = osmesa
 #DRIVER_DIRS = dri

configs/default

@@ -9,8 +9,8 @@ CONFIG_NAME = default
 
 # Version info
 MESA_MAJOR=7
-MESA_MINOR=8
-MESA_TINY=1
+MESA_MINOR=3
+MESA_TINY=0
 MESA_VERSION = $(MESA_MAJOR).$(MESA_MINOR).$(MESA_TINY)
 
 # external projects.  This should be useless now that we use libdrm.
@@ -19,17 +19,11 @@ DRM_SOURCE_PATH=$(TOP)/../drm
 # Compiler and flags
 CC = cc
 CXX = CC
-HOST_CC = $(CC)
 CFLAGS = -O
 CXXFLAGS = -O
 LDFLAGS =
-HOST_CFLAGS = $(CFLAGS)
 GLU_CFLAGS = 
 
-# Compiler for building demos/tests/etc
-APP_CC = $(CC)
-APP_CXX = $(CXX)
-
 # Misc tools and flags
 SHELL = /bin/sh
 MKLIB = $(SHELL) $(TOP)/bin/mklib
@@ -37,10 +31,7 @@ MKLIB_OPTIONS =
 MKDEP = makedepend
 MKDEP_OPTIONS = -fdepend
 MAKE = make
-
-# Use MINSTALL for installing libraries, INSTALL for everything else
-MINSTALL = $(SHELL) $(TOP)/bin/minstall
-INSTALL = $(MINSTALL)
+INSTALL = $(SHELL) $(TOP)/bin/minstall
 
 # Tools for regenerating glapi (generally only needed by the developers)
 PYTHON2 = python
@@ -52,20 +43,16 @@ INDENT_FLAGS = -i4 -nut -br -brs -npcs -ce -T GLubyte -T GLbyte -T Bool
 GL_LIB = GL
 GLU_LIB = GLU
 GLUT_LIB = glut
-GLEW_LIB = GLEW
 GLW_LIB = GLw
 OSMESA_LIB = OSMesa
-EGL_LIB = EGL
 
 
 # Library names (actual file names)
 GL_LIB_NAME = lib$(GL_LIB).so
 GLU_LIB_NAME = lib$(GLU_LIB).so
 GLUT_LIB_NAME = lib$(GLUT_LIB).so
-GLEW_LIB_NAME = lib$(GLEW_LIB).a
 GLW_LIB_NAME = lib$(GLW_LIB).so
 OSMESA_LIB_NAME = lib$(OSMESA_LIB).so
-EGL_LIB_NAME = lib$(EGL_LIB).so
 
 # globs used to install the lib and all symlinks
 GL_LIB_GLOB = $(GL_LIB_NAME)*
@@ -73,10 +60,9 @@ GLU_LIB_GLOB = $(GLU_LIB_NAME)*
 GLUT_LIB_GLOB = $(GLUT_LIB_NAME)*
 GLW_LIB_GLOB = $(GLW_LIB_NAME)*
 OSMESA_LIB_GLOB = $(OSMESA_LIB_NAME)*
-EGL_LIB_GLOB = $(EGL_LIB_NAME)*
 
 # Optional assembly language optimization files for libGL
-MESA_ASM_SOURCES = 
+ASM_SOURCES = 
 
 # GLw widget sources (Append "GLwMDrawA.c" here and add -lXm to GLW_LIB_DEPS in
 # order to build the Motif widget too)
@@ -86,40 +72,24 @@ MOTIF_CFLAGS = -I/usr/include/Motif1.2
 
 # Directories to build
 LIB_DIR = lib
-SRC_DIRS = glsl mesa gallium egl gallium/winsys glu glut/glx glew glw
+SRC_DIRS = mesa glu glut/glx glw
 GLU_DIRS = sgi
 DRIVER_DIRS = x11 osmesa
 # Which subdirs under $(TOP)/progs/ to enter:
-PROGRAM_DIRS = demos redbook samples glsl objviewer xdemos
+PROGRAM_DIRS = demos redbook samples glsl xdemos
 
-# EGL drivers to build
-EGL_DRIVERS_DIRS = glx
-
-# Gallium directories and 
-GALLIUM_DIRS = auxiliary drivers state_trackers
-GALLIUM_AUXILIARIES = $(TOP)/src/gallium/auxiliary/libgallium.a
-GALLIUM_DRIVERS_DIRS = softpipe failover svga i915 i965 r300 trace identity
-GALLIUM_DRIVERS = $(foreach DIR,$(GALLIUM_DRIVERS_DIRS),$(TOP)/src/gallium/drivers/$(DIR)/lib$(DIR).a)
-GALLIUM_WINSYS_DIRS = drm xlib
-GALLIUM_WINSYS_DRM_DIRS = swrast
-GALLIUM_STATE_TRACKERS_DIRS = glx vega
-
-# native displays EGL should support
-EGL_DISPLAYS = x11
 
 # Library dependencies
 #EXTRA_LIB_PATH ?=
-GL_LIB_DEPS     = $(EXTRA_LIB_PATH) -lX11 -lXext -lm -lpthread
-EGL_LIB_DEPS    = $(EXTRA_LIB_PATH) -ldl -lpthread
-OSMESA_LIB_DEPS = $(EXTRA_LIB_PATH) -L$(TOP)/$(LIB_DIR) -l$(GL_LIB)
-GLU_LIB_DEPS    = $(EXTRA_LIB_PATH) -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lm
-GLUT_LIB_DEPS   = $(EXTRA_LIB_PATH) -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -lX11 -lXmu -lXi -lm
-GLW_LIB_DEPS    = $(EXTRA_LIB_PATH) -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lXt -lX11
-APP_LIB_DEPS    = $(EXTRA_LIB_PATH) -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm
+GL_LIB_DEPS = $(EXTRA_LIB_PATH) -lX11 -lXext -lm -lpthread
+OSMESA_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB)
+GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lm
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) $(EXTRA_LIB_PATH) -lX11 -lXmu -lXi -lm
+GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) $(EXTRA_LIB_PATH) -lXt -lX11
 
 # Program dependencies - specific GL/glut libraries added in Makefiles
 APP_LIB_DEPS = -lm
-X11_LIBS = -lX11
+
 
 # Installation directories (for make install)
 INSTALL_DIR = /usr/local
@@ -130,12 +100,6 @@ DRI_DRIVER_INSTALL_DIR = $(INSTALL_LIB_DIR)/dri
 # Where libGL will look for DRI hardware drivers
 DRI_DRIVER_SEARCH_DIR = $(DRI_DRIVER_INSTALL_DIR)
 
-# EGL driver install directory
-EGL_DRIVER_INSTALL_DIR = $(INSTALL_LIB_DIR)/egl
-
-# Xorg driver install directory (for xorg state-tracker)
-XORG_DRIVER_INSTALL_DIR = $(INSTALL_LIB_DIR)/xorg/modules/drivers
-
 # pkg-config substitutions
 GL_PC_REQ_PRIV =
 GL_PC_LIB_PRIV =

configs/freebsd-dri

@@ -27,7 +27,6 @@ CFLAGS += -fno-strict-aliasing
 CXXFLAGS += -fno-strict-aliasing
 
 ASM_SOURCES = 
-MESA_ASM_SOURCES = 
 
 # Library/program dependencies
 LIBDRM_CFLAGS = `pkg-config --cflags libdrm`
@@ -41,13 +40,15 @@ GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/local/lib -lGL -lXt -lX11
 
 
 # Directories
-SRC_DIRS = glx gallium mesa glu glut/glx glew glw
+SRC_DIRS = glx/x11 mesa glu glut/glx glw
 DRIVER_DIRS = dri
 PROGRAM_DIRS = 
 WINDOW_SYSTEM=dri
 
 DRM_SOURCE_PATH=$(TOP)/../drm
 
+# ffb and gamma are missing because they have not been converted to use the new
+# interface.
 DRI_DIRS = i810 i915 i965 mach64 mga r128 r200 r300 radeon tdfx \
 	   unichrome savage sis
 

configs/freebsd-dri-amd64

@@ -6,5 +6,5 @@ include $(TOP)/configs/freebsd-dri
 CONFIG_NAME = freebsd-dri-x86-64
 
 ASM_FLAGS = -DUSE_X86_64_ASM
-MESA_ASM_SOURCES = $(X86-64_SOURCES)
-GLAPI_ASM_SOURCES = $(X86-64_API)
+ASM_SOURCES = $(X86-64_SOURCES)
+ASM_API = $(X86-64_API)

configs/freebsd-dri-x86

@@ -9,5 +9,5 @@ CONFIG_NAME = freebsd-dri-x86
 PIC_FLAGS = 
 
 ASM_FLAGS = -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM
-MESA_ASM_SOURCES = $(X86_SOURCES)
-GLAPI_ASM_SOURCES = $(X86_API)
+ASM_SOURCES = $(X86_SOURCES)
+ASM_API = $(X86_API)

configs/linux

@@ -22,12 +22,11 @@ DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
 
 X11_INCLUDES = -I/usr/X11R6/include
 
-CFLAGS = -Wall -Wmissing-prototypes -Wdeclaration-after-statement \
-	-Wpointer-arith $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) \
-	$(DEFINES) $(ASM_FLAGS) $(X11_INCLUDES) -std=c99 -ffast-math
+CFLAGS = -Wall -Wmissing-prototypes $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) \
+	$(DEFINES) $(ASM_FLAGS) $(X11_INCLUDES) -std=c99 -ffast-math 
 
-CXXFLAGS = -Wall -Wpointer-arith $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) \
-	$(DEFINES) $(X11_INCLUDES)
+CXXFLAGS = -Wall $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \
+	$(X11_INCLUDES) 
 
 # Work around aliasing bugs - developers should comment this out
 CFLAGS += -fno-strict-aliasing

configs/linux-cell

@@ -1,71 +0,0 @@
-# linux-cell  (non-debug build)
-
-include $(TOP)/configs/linux
-
-CONFIG_NAME = linux-cell
-
-
-# Omiting other gallium drivers:
-GALLIUM_DRIVERS_DIRS = cell softpipe trace
-
-
-# Compiler and flags
-CC = ppu32-gcc
-CXX = ppu32-g++
-HOST_CC = gcc
-APP_CC = gcc
-APP_CXX = g++
-
-OPT_FLAGS = -O3
-
-# Cell SDK location
-## For SDK 2.1: (plus, remove -DSPU_MAIN_PARAM_LONG_LONG below)
-#SDK = /opt/ibm/cell-sdk/prototype/sysroot/usr
-## For SDK 3.0:
-SDK = /opt/cell/sdk/usr
-
-
-
-COMMON_C_CPP_FLAGS = $(OPT_FLAGS) -Wall -Winline \
-	-fPIC -m32 -mabi=altivec -maltivec \
-	-I. -I$(SDK)/include \
-	-DGALLIUM_CELL $(DEFINES)
-
-CFLAGS = $(COMMON_C_CPP_FLAGS) -Wmissing-prototypes -std=c99
-
-CXXFLAGS = $(COMMON_C_CPP_FLAGS)
-
-
-# Omitting glw here:
-SRC_DIRS = glsl mesa gallium gallium/winsys glu glut/glx glew
-
-# Build no traditional Mesa drivers:
-DRIVER_DIRS =
-
-
-MKDEP_OPTIONS = -fdepend -Y
-
-
-GL_LIB_DEPS = $(EXTRA_LIB_PATH) -lX11 -lXext -lm -lpthread \
-	-L$(SDK)/lib -m32 -Wl,-m,elf32ppc -R$(SDK)/lib -lspe2
-
-
-CELL_SPU_LIB = $(TOP)/src/gallium/drivers/cell/spu/g3d_spu.a
-
-
-### SPU stuff
-
-SPU_CC = spu-gcc
-
-SPU_CFLAGS = $(OPT_FLAGS) -W -Wall -Winline -Wmissing-prototypes -Wno-main \
-	-I. -I$(SDK)/spu/include -I$(TOP)/src/mesa/ $(INCLUDE_DIRS) \
-	-DSPU_MAIN_PARAM_LONG_LONG \
-	-include spu_intrinsics.h
-
-SPU_LFLAGS = -L$(SDK)/spu/lib -Wl,-N -lmisc -lm
-
-SPU_AR = ppu-ar
-SPU_AR_FLAGS = -qcs
-
-SPU_EMBED = ppu32-embedspu
-SPU_EMBED_FLAGS = -m32

configs/linux-cell-debug

@@ -1,10 +0,0 @@
-# linux-cell-debug
-
-include $(TOP)/configs/linux-cell
-
-# just override name and OPT_FLAGS here:
-
-CONFIG_NAME = linux-cell-debug
-
-OPT_FLAGS = -g -DDEBUG
-

configs/linux-debug

@@ -4,6 +4,5 @@ include $(TOP)/configs/linux
 
 CONFIG_NAME = linux-debug
 
-OPT_FLAGS = -g
-CFLAGS += -pedantic
+OPT_FLAGS = -g -ansi -pedantic
 DEFINES += -DDEBUG -DDEBUG_MATH

configs/linux-directfb

@@ -0,0 +1,38 @@
+# Configuration for DirectFB
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = linux-directfb
+
+# Compiler and flags
+CC  = gcc
+CXX = g++
+
+CFLAGS   = -Wall -O3 -ffast-math -fPIC -std=c99 -D_GNU_SOURCE -D_POSIX_SOURCE -D_SVID_SOURCE \
+         -D_POSIX_C_SOURCE=199309L -D_BSD_SOURCE -DPTHREADS
+
+CXXFLAGS = -Wall -O3 -fPIC -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE   
+
+# Work around aliasing bugs - developers should comment this out
+CFLAGS += -fno-strict-aliasing
+CXXFLAGS += -fno-strict-aliasing
+
+HAVE_X86 = $(shell uname -m | grep 'i[3-6]86' >/dev/null && echo yes)
+ifeq ($(HAVE_X86), yes)
+     CFLAGS   += -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM
+     CXXFLAGS += -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM
+     ASM_SOURCES = $(X86_SOURCES)
+     ASM_API = $(X86_API)
+endif
+
+# Directories
+SRC_DIRS     = mesa glu glut/directfb
+GLU_DIRS     = sgi
+DRIVER_DIRS  = directfb
+PROGRAM_DIRS = demos directfb
+
+# Library/program dependencies
+GL_LIB_DEPS   = -lm -lpthread
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -l$(GLU_LIB)
+APP_LIB_DEPS  = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -l$(GLU_LIB) -l$(GLUT_LIB)
+

configs/linux-dri

@@ -13,7 +13,7 @@ CXX = g++
 #MKDEP = gcc -M
 #MKDEP_OPTIONS = -MF depend
 
-OPT_FLAGS  = -O2 -g
+OPT_FLAGS  = -O -g
 PIC_FLAGS  = -fPIC
 
 # Add '-DGLX_USE_TLS' to ARCH_FLAGS to enable TLS support.
@@ -38,36 +38,37 @@ GLUT_CFLAGS = -fexceptions
 CFLAGS += -fno-strict-aliasing
 CXXFLAGS += -fno-strict-aliasing
 
-MESA_ASM_SOURCES = 
+ASM_SOURCES = 
 
 # Library/program dependencies
 EXTRA_LIB_PATH=-L/usr/X11R6/lib
 
-LIBDRM_CFLAGS = $(shell pkg-config --cflags libdrm)
-LIBDRM_LIB = $(shell pkg-config --libs libdrm)
+LIBDRM_CFLAGS = `pkg-config --cflags libdrm`
+LIBDRM_LIB = `pkg-config --libs libdrm`
 DRI_LIB_DEPS  = $(EXTRA_LIB_PATH) -lm -lpthread -lexpat -ldl $(LIBDRM_LIB)
 GL_LIB_DEPS   = $(EXTRA_LIB_PATH) -lX11 -lXext -lXxf86vm -lXdamage -lXfixes \
 		-lm -lpthread -ldl $(LIBDRM_LIB)
 
 
-# Directories
-SRC_DIRS := glx egl $(SRC_DIRS)
-PROGRAM_DIRS := egl $(PROGRAM_DIRS)
+# This is now 0 by default since it seems to confuse the hell out of people
+# and generate a lot of extra noise on bugzilla.  If you need to build with
+# EGL, do 'make linux-dri USING_EGL=1'
 
-# EGL directories
-EGL_DRIVERS_DIRS = glx
+USING_EGL=0
+
+# Directories
+ifeq ($(USING_EGL), 1)
+SRC_DIRS = egl glx/x11 mesa glu glut/glx glw
+PROGRAM_DIRS = egl xdemos
+else
+SRC_DIRS = glx/x11 mesa glu glut/glx glw
+PROGRAM_DIRS = xdemos
+endif
 
 DRIVER_DIRS = dri
-WINDOW_SYSTEM = dri
-GALLIUM_WINSYS_DIRS = drm
-GALLIUM_WINSYS_DRM_DIRS = vmware intel i965
-GALLIUM_STATE_TRACKERS_DIRS = egl
+WINDOW_SYSTEM=dri
 
-DRI_DIRS = i810 i915 i965 mach64 mga r128 r200 r300 radeon \
-	savage sis tdfx unichrome swrast
-
-INTEL_LIBS = `pkg-config --libs libdrm_intel`
-INTEL_CFLAGS = `pkg-config --cflags libdrm_intel`
-
-RADEON_LIBS = `pkg-config --libs libdrm_radeon`
-RADEON_CFLAGS = `pkg-config --cflags libdrm_radeon`
+# gamma are missing because they have not been converted to use the new
+# interface.
+DRI_DIRS = i810 i915 i965 mach64 mga r128 r200 r300 radeon s3v \
+	savage sis tdfx trident unichrome ffb

configs/linux-dri-debug

@@ -11,6 +11,6 @@ ARCH_FLAGS = -DDEBUG
 #DRI_DIRS = i915tex i915 
 #DRI_DIRS = i965
 #DRI_DIRS = radeon r200 r300
-#DRI_DIRS = unichrome sis
+#DRI_DIRS = unichrome sis trident
 #DRI_DIRS = i810 mga r128 tdfx
 

configs/linux-dri-ppc

@@ -9,7 +9,7 @@ OPT_FLAGS = -Os -mcpu=603
 PIC_FLAGS = -fPIC
 
 ASM_FLAGS = -DUSE_PPC_ASM -DUSE_VMX_ASM
-MESA_ASM_SOURCES = $(PPC_SOURCES)
+ASM_SOURCES = $(PPC_SOURCES)
 
 # Build only the drivers for cards that exist on PowerPC.  At some point MGA
 # will be added, but not yet.

configs/linux-dri-x86

@@ -5,9 +5,10 @@ include $(TOP)/configs/linux-dri
 
 CONFIG_NAME = linux-dri-x86
 
-ARCH_FLAGS = -m32 -mmmx -msse -msse2
+# Add -m32 to CFLAGS:
+ARCH_FLAGS = -m32
 
 ASM_FLAGS = -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM
-MESA_ASM_SOURCES = $(X86_SOURCES)
-GLAPI_ASM_SOURCES = $(X86_API)
+ASM_SOURCES = $(X86_SOURCES)
+ASM_API = $(X86_API)
 

configs/linux-dri-x86-64

@@ -8,15 +8,15 @@ CONFIG_NAME = linux-dri-x86-64
 ARCH_FLAGS = -m64
 
 ASM_FLAGS = -DUSE_X86_64_ASM
-MESA_ASM_SOURCES = $(X86-64_SOURCES)
-GLAPI_ASM_SOURCES = $(X86-64_API)
+ASM_SOURCES = $(X86-64_SOURCES)
+ASM_API = $(X86-64_API)
 
 LIB_DIR = lib64
 
 # Library/program dependencies
 EXTRA_LIB_PATH=-L/usr/X11R6/lib64
 
-# sis is missing because it has not been converted to use
+# ffb, gamma, and sis are missing because they have not be converted to use
 # the new interface.  i810 are missing because there is no x86-64
 # system where they could *ever* be used.
 #

configs/linux-dri-xcb

@@ -25,7 +25,7 @@ DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
 	-DGLX_DIRECT_RENDERING -DGLX_INDIRECT_RENDERING \
         -DHAVE_ALIAS -DUSE_XCB -DHAVE_POSIX_MEMALIGN
 
-X11_INCLUDES = $(shell pkg-config --cflags-only-I x11) $(shell pkg-config --cflags-only-I xcb) $(shell pkg-config --cflags-only-I x11-xcb) $(shell pkg-config --cflags-only-I xcb-glx)
+X11_INCLUDES = `pkg-config --cflags-only-I x11` `pkg-config --cflags-only-I xcb` `pkg-config --cflags-only-I x11-xcb` `pkg-config --cflags-only-I xcb-glx`
 
 CFLAGS = -Wall -Wmissing-prototypes $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) \
 	$(DEFINES) $(ASM_FLAGS) -std=c99 -ffast-math 
@@ -36,22 +36,38 @@ CXXFLAGS = -Wall $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
 CFLAGS += -fno-strict-aliasing
 CXXFLAGS += -fno-strict-aliasing
 
-MESA_ASM_SOURCES = 
+ASM_SOURCES = 
 
 # Library/program dependencies
-EXTRA_LIB_PATH=$(shell pkg-config --libs-only-L x11)
+EXTRA_LIB_PATH=`pkg-config --libs-only-L x11`
 
-LIBDRM_CFLAGS = $(shell pkg-config --cflags libdrm)
-LIBDRM_LIB = $(shell pkg-config --libs libdrm)
+LIBDRM_CFLAGS = `pkg-config --cflags libdrm`
+LIBDRM_LIB = `pkg-config --libs libdrm`
 DRI_LIB_DEPS  = $(EXTRA_LIB_PATH) -lm -lpthread -lexpat -ldl $(LIBDRM_LIB)
-GL_LIB_DEPS   = $(EXTRA_LIB_PATH) -lX11 -lXext -lXxf86vm -lm -lpthread -ldl \
-                $(LIBDRM_LIB) $(shell pkg-config --libs xcb) $(shell pkg-config --libs x11-xcb) $(shell pkg-config --libs xcb-glx)
+GL_LIB_DEPS   = $(EXTRA_LIB_PATH) -lX11 -lXext -lXxf86vm -lXdamage -lXfixes \
+		-lm -lpthread -ldl $(LIBDRM_LIB) `pkg-config --libs xcb` \
+		`pkg-config --libs x11-xcb` `pkg-config --libs xcb-glx`
 
-SRC_DIRS = glx gallium mesa glu glut/glx glew glw
+
+# This is now 0 by default since it seems to confuse the hell out of people
+# and generate a lot of extra noise on bugzilla.  If you need to build with
+# EGL, do 'make linux-dri USING_EGL=1'
+
+USING_EGL=0
+
+# Directories
+ifeq ($(USING_EGL), 1)
+SRC_DIRS = egl glx/x11 mesa glu glut/glx glw
+PROGRAM_DIRS = egl xdemos
+else
+SRC_DIRS = glx/x11 mesa glu glut/glx glw
 PROGRAM_DIRS = xdemos
+endif
 
 DRIVER_DIRS = dri
 WINDOW_SYSTEM=dri
 
-DRI_DIRS = i810 i915 mach64 mga r128 r200 r300 radeon \
-	savage sis tdfx unichrome
+# gamma are missing because they have not been converted to use the new
+# interface.
+DRI_DIRS = i810 i915 mach64 mga r128 r200 r300 radeon s3v \
+	savage sis tdfx trident unichrome ffb 

configs/linux-egl

@@ -1,57 +0,0 @@
-# -*-makefile-*-
-# Configuration for linux-dri: Linux DRI hardware drivers for XFree86 & others
-
-include $(TOP)/configs/default
-
-CONFIG_NAME = linux-dri
-
-# Compiler and flags
-CC = gcc
-CXX = g++
-
-#MKDEP = /usr/X11R6/bin/makedepend
-#MKDEP = gcc -M
-#MKDEP_OPTIONS = -MF depend
-
-OPT_FLAGS  = -O -g
-PIC_FLAGS  = -fPIC
-
-# Add '-DGLX_USE_TLS' to ARCH_FLAGS to enable TLS support.
-ARCH_FLAGS ?=
-
-DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
-	-D_BSD_SOURCE -D_GNU_SOURCE \
-	-DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 -DIN_DRI_DRIVER \
-	-DGLX_DIRECT_RENDERING -DGLX_INDIRECT_RENDERING \
-	-DHAVE_ALIAS -DHAVE_POSIX_MEMALIGN
-
-X11_INCLUDES = -I/usr/X11R6/include
-
-CFLAGS = -Wall -Wmissing-prototypes -std=c99 -ffast-math \
-	$(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) $(ASM_FLAGS)
-
-CXXFLAGS = -Wall $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
-
-
-MESA_ASM_SOURCES = 
-
-# Library/program dependencies
-EXTRA_LIB_PATH=-L/usr/X11R6/lib
-
-LIBDRM_CFLAGS = $(shell pkg-config --cflags libdrm)
-LIBDRM_LIB = $(shell pkg-config --libs libdrm)
-DRI_LIB_DEPS  = $(EXTRA_LIB_PATH) -lm -lpthread -lexpat -ldl $(LIBDRM_LIB)
-GL_LIB_DEPS   = $(EXTRA_LIB_PATH) -lX11 -lXext -lXxf86vm -lXdamage -lXfixes \
-		-lm -lpthread -ldl \
-                $(LIBDRM_LIB)
-
-
-# Directories
-SRC_DIRS = gallium mesa gallium/winsys glu egl
-PROGRAM_DIRS = egl
-
-DRIVER_DIRS = dri
-WINDOW_SYSTEM = dri
-GALLIUM_WINSYS_DIRS = egl_drm
-
-DRI_DIRS = intel 

configs/linux-fbdev

@@ -9,7 +9,7 @@ CFLAGS = -O3 -ffast-math -ansi -pedantic -fPIC -D_POSIX_C_SOURCE=199309L -D_SVID
 # Work around aliasing bugs - developers should comment this out
 CFLAGS += -fno-strict-aliasing
 
-SRC_DIRS = gallium mesa glu glut/fbdev glew
+SRC_DIRS = mesa glu glut/fbdev
 DRIVER_DIRS = fbdev osmesa
 PROGRAM_DIRS = fbdev demos redbook samples
 

configs/linux-glide

@@ -0,0 +1,23 @@
+# Configuration for generic Linux with 3Dfx Glide driver
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = linux-glide
+
+# Compiler and flags
+CC = gcc
+CXX = g++
+
+CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS -I/usr/X11R6/include -DFX -I/usr/include/glide -I/usr/local/glide/include
+CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
+GLUT_CFLAGS = -fexceptions
+
+# Work around aliasing bugs - developers should comment this out
+CFLAGS += -fno-strict-aliasing
+CXXFLAGS += -fno-strict-aliasing
+
+# Library/program dependencies
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -L/usr/local/glide/lib -lglide3x -lm -lpthread
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
+GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -L/usr/X11R6/lib -lXt -lX11
+APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/local/glide/lib -lglide3x -lm

configs/linux-i965

@@ -1,8 +0,0 @@
-# Configuration for standalone mode i965 debug
-
-include $(TOP)/configs/linux-debug
-
-CONFIG_NAME = linux-i965
-
-GALLIUM_DRIVER_DIRS = i965
-GALLIUM_WINSYS_DIRS = drm/i965/xlib

configs/linux-icc

@@ -16,7 +16,7 @@ GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread
 GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
 APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm
 
-MESA_ASM_SOURCES = $(X86_SOURCES)
-GLAPI_ASM_SOURCES = $(X86_API)
+ASM_SOURCES = $(X86_SOURCES)
+ASM_API = $(X86_API)
 
 

configs/linux-icc-static

@@ -23,5 +23,5 @@ GL_LIB_DEPS =
 GLUT_LIB_DEPS =
 APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm -lpthread -lcxa -lunwind
 
-MESA_ASM_SOURCES = $(X86_SOURCES)
-GLAPI_ASM_SOURCES = $(X86_API)
+ASM_SOURCES = $(X86_SOURCES)
+ASM_API = $(X86_API)

configs/linux-indirect

@@ -37,7 +37,7 @@ CXXFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
 CFLAGS += -fno-strict-aliasing
 CXXFLAGS += -fno-strict-aliasing
 
-MESA_ASM_SOURCES = 
+ASM_SOURCES = 
 
 # Library/program dependencies
 EXTRA_LIB_PATH=-L/usr/X11R6/lib
@@ -47,7 +47,7 @@ GL_LIB_DEPS   = $(EXTRA_LIB_PATH) -lX11 -lXext -lXxf86vm -lm -lpthread -ldl
 
 
 # Directories
-SRC_DIRS = glx glu glut/glx glew glw
+SRC_DIRS = glx/x11 glu glut/glx glw
 DRIVER_DIRS =
 PROGRAM_DIRS = 
 WINDOW_SYSTEM=dri

configs/linux-llvm

@@ -1,42 +0,0 @@
-# -*-makefile-*-
-# Configuration for Linux and LLVM with optimizations
-# Builds the llvmpipe gallium driver
-
-include $(TOP)/configs/linux
-
-CONFIG_NAME = linux-llvm
-
-# Add llvmpipe driver
-GALLIUM_DRIVERS_DIRS += llvmpipe
-
-OPT_FLAGS = -O3 -ansi -pedantic
-ARCH_FLAGS = -m32 -mmmx -msse -msse2 -mstackrealign
-
-DEFINES += -DNDEBUG -DGALLIUM_LLVMPIPE -DDRAW_LLVM -DHAVE_UDIS86
-
-# override -std=c99
-CFLAGS += -std=gnu99
-
-LLVM_VERSION := $(shell llvm-config --version)
-
-ifeq ($(LLVM_VERSION),)
-  $(warning Could not find LLVM! Make Sure 'llvm-config' is in the path)
-  MESA_LLVM=0
-else
-  MESA_LLVM=1
-#  $(info Using LLVM version: $(LLVM_VERSION))
-endif
-
-ifeq ($(MESA_LLVM),1)
-#  LLVM_CFLAGS=`llvm-config --cflags`
-  LLVM_CXXFLAGS=`llvm-config --cxxflags backend bitreader engine ipo interpreter instrumentation` -Wno-long-long
-  LLVM_LDFLAGS = $(shell llvm-config --ldflags backend bitreader engine ipo interpreter instrumentation)
-  LLVM_LIBS = $(shell llvm-config --libs backend bitwriter bitreader engine ipo interpreter instrumentation)
-  MKLIB_OPTIONS=-cplusplus
-else
-  LLVM_CFLAGS=
-  LLVM_CXXFLAGS=
-endif
-
-LD = g++
-GL_LIB_DEPS = $(LLVM_LDFLAGS) $(LLVM_LIBS) $(EXTRA_LIB_PATH) -lX11 -lXext -lm -lpthread -lstdc++ -ludis86

configs/linux-llvm-debug

@@ -1,12 +0,0 @@
-# -*-makefile-*-
-# Configuration for Linux and LLVM with debugging info
-# Builds the llvmpipe gallium driver
-
-include $(TOP)/configs/linux-llvm
-
-CONFIG_NAME = linux-llvm-debug
-
-OPT_FLAGS = -g -ansi -pedantic
-
-DEFINES += -DDEBUG -UNDEBUG
-

configs/linux-opengl-es

@@ -1,28 +0,0 @@
-# Configuration for OpenGL ES on Linux
-
-include $(TOP)/configs/linux
-
-CONFIG_NAME = linux-opengl-es
-
-# Directories to build
-LIB_DIR = lib
-SRC_DIRS = egl glsl mesa/es gallium gallium/winsys
-PROGRAM_DIRS = es1/screen es1/xegl es2/xegl
-
-# egl st needs this
-DEFINES += -DGLX_DIRECT_RENDERING
-
-# no mesa or egl drivers
-DRIVER_DIRS =
-EGL_DRIVERS_DIRS =
-
-GALLIUM_DRIVERS_DIRS = softpipe
-
-# build libGLES*.so
-GALLIUM_STATE_TRACKERS_DIRS = es
-
-# build egl_x11_{swrast,i915}.so
-GALLIUM_DRIVERS_DIRS += trace i915
-GALLIUM_STATE_TRACKERS_DIRS += egl
-GALLIUM_WINSYS_DIRS += drm
-GALLIUM_WINSYS_DRM_DIRS += intel swrast

configs/linux-osmesa

@@ -17,7 +17,7 @@ CFLAGS += -fno-strict-aliasing
 CXXFLAGS += -fno-strict-aliasing
 
 # Directories
-SRC_DIRS = gallium mesa glu
+SRC_DIRS = mesa glu
 DRIVER_DIRS = osmesa
 PROGRAM_DIRS = osdemos
 

configs/linux-osmesa-static

@@ -1,37 +0,0 @@
-# Configuration for building static libOSMesa.a on Linux, no Xlib driver
-# This doesn't really have any Linux dependencies, so it should be usable
-# on other (gcc-based) systems.
-
-include $(TOP)/configs/default
-
-CONFIG_NAME = linux-osmesa
-
-# Compiler and flags
-CC = gcc -m32
-CXX = g++ -m32
-CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DPTHREADS
-CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
-
-MKLIB_OPTIONS = -static
-
-# Library names (actual file names)
-GL_LIB_NAME = libGL.a
-GLU_LIB_NAME = libGLU.a
-GLUT_LIB_NAME = libglut.a
-GLW_LIB_NAME = libGLw.a
-OSMESA_LIB_NAME = libOSMesa.a
-
-# Directories
-SRC_DIRS = mesa glu
-DRIVER_DIRS = osmesa
-PROGRAM_DIRS = osdemos
-
-
-# Dependencies
-GL_LIB_DEPS =
-OSMESA_LIB_DEPS =
-GLU_LIB_DEPS =
-GLUT_LIB_DEPS =
-GLW_LIB_DEPS =
-APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) \
-               $(EXTRA_LIB_PATH) -lX11 -lXmu -lXt -lXi -lpthread -lstdc++ -lm

configs/linux-osmesa16

@@ -20,7 +20,7 @@ OSMESA_LIB_NAME = libOSMesa16.so
 
 
 # Directories
-SRC_DIRS = gallium mesa glu
+SRC_DIRS = mesa glu
 DRIVER_DIRS = osmesa
 PROGRAM_DIRS = 
 

configs/linux-osmesa16-static

@@ -22,7 +22,7 @@ OSMESA_LIB_NAME = libOSMesa16.a
 
 
 # Directories
-SRC_DIRS = gallium mesa glu
+SRC_DIRS = mesa glu
 DRIVER_DIRS = osmesa
 PROGRAM_DIRS = 
 

configs/linux-osmesa32

@@ -20,7 +20,7 @@ OSMESA_LIB_NAME = libOSMesa32.so
 
 
 # Directories
-SRC_DIRS = gallium mesa glu
+SRC_DIRS = mesa glu
 DRIVER_DIRS = osmesa
 PROGRAM_DIRS = 
 

configs/linux-profile

@@ -1,8 +1,29 @@
 # Configuration for profiling on Linux with gprof
 
-include $(TOP)/configs/linux-static
+include $(TOP)/configs/default
 
 CONFIG_NAME = linux-profile
 
-OPT_FLAGS = -pg -g -O2
-DEFINES += -DNDEBUG
+# Compiler and flags
+CC = gcc
+CXX = g++
+
+CFLAGS = -pg -O -ansi -pedantic -Wall -Wmissing-prototypes -Wundef -fPIC -ffast-math -D_POSIX_SOURCE -D_SVID_SOURCE -D_BSD_SOURCE -I/usr/X11R6/include -DUSE_XSHM -DPTHREADS -DDEBUG
+
+CXXFLAGS = -pg -O -ansi -pedantic -Wall -Wundef -fPIC -ffast-math -D_POSIX_SOURCE -D_SVID_SOURCE -D_BSD_SOURCE -DDEBUG
+
+GLUT_CFLAGS = -fexceptions
+
+# Need to have -L/usr/X11R6/lib in these:
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
+GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lXt -L/usr/X11R6/lib -lX11
+
+# Need to make static libs for profiling:
+MKLIB_OPTIONS = -static
+GL_LIB_NAME = lib$(GL_LIB).a
+GLU_LIB_NAME = lib$(GLU_LIB).a
+GLUT_LIB_NAME = lib$(GLUT_LIB).a
+GLW_LIB_NAME = lib$(GLW_LIB).a
+OSMESA_LIB_NAME = lib$(OSMesa).a
+APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm -lpthread

configs/linux-solo

@@ -0,0 +1,54 @@
+# Configuration for linux-solo: Linux DRI hardware drivers for fbdev
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = linux-solo
+
+# Compiler and flags
+CC = gcc
+CXX = g++
+
+WARN_FLAGS = -Wall -Wundef
+OPT_FLAGS  = -O3 -g
+PIC_FLAGS  = -fPIC
+
+# Add '-DGLX_USE_TLS' to ARCH_FLAGS to enable TLS support.
+ARCH_FLAGS ?=
+
+# DRM and pciaccess
+LIBDRM_CFLAGS = `pkg-config --cflags libdrm`
+LIBDRM_LIB = `pkg-config --libs libdrm`
+PCIACCESS_CFLAGS = `pkg-config --cflags pciaccess`
+PCIACCESS_LIB = `pkg-config --libs pciaccess`
+
+
+DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
+	-D_BSD_SOURCE -D_GNU_SOURCE -DHAVE_POSIX_MEMALIGN \
+	-DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 -DIN_DRI_DRIVER \
+	-DHAVE_ALIAS
+
+CFLAGS   = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \
+	$(ASM_FLAGS) -std=c99 -ffast-math 
+
+CXXFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
+
+# Work around aliasing bugs - developers should comment this out
+CFLAGS += -fno-strict-aliasing
+CXXFLAGS += -fno-strict-aliasing
+
+ASM_SOURCES = 
+
+# Library/program dependencies
+DRI_LIB_DEPS = -lm -lpthread -lexpat -ldl -L$(TOP)/$(LIB_DIR) $(PCIACCESS_LIB)
+GL_LIB_DEPS = -lm -lpthread -ldl
+GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lm
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -lm
+APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm -lpthread
+
+# Directories
+SRC_DIRS = glx/mini mesa glu glut/mini
+DRIVER_DIRS = dri
+PROGRAM_DIRS = miniglx
+
+#DRI_DIRS = ffb gamma sis savage tdfx unichrome fb
+DRI_DIRS = i810 i915tex i915 mach64 mga r128 r200 radeon

configs/linux-solo-ia64

@@ -0,0 +1,7 @@
+# Configuration for linux-solo-ia64: Linux DRI hardware drivers for fbdev
+
+include $(TOP)/configs/linux-solo
+
+CONFIG_NAME = linux-solo-ia64
+
+DRI_DIRS = fb mach64 mga r128 r200 radeon sis tdfx unichrome

configs/linux-solo-x86

@@ -0,0 +1,10 @@
+# -*-makefile-*-
+# Configuration for linux-solo-x86: Linux hardware drivers for fbdev for x86
+
+include $(TOP)/configs/linux-solo
+
+CONFIG_NAME = linux-solo-x86
+
+ASM_FLAGS = -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM
+ASM_SOURCES = $(X86_SOURCES)
+ASM_API = $(X86_API)

configs/linux-sparc

@@ -5,5 +5,5 @@ include $(TOP)/configs/linux
 CONFIG_NAME = linux-sparc
 
 #ASM_FLAGS = -DUSE_SPARC_ASM
-#MESA_ASM_SOURCES = $(SPARC_SOURCES)
-#GLAPI_ASM_SOURCES = $(SPARC_API)
+#ASM_SOURCES = $(SPARC_SOURCES)
+#ASM_API = $(SPARC_API)

configs/linux-static

@@ -22,5 +22,5 @@ GLUT_LIB_DEPS =
 GLW_LIB_DEPS = 
 
 # Need to specify all libraries we may need
-APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) \
-	-l$(GL_LIB) -lm -L/usr/X11R6/lib/ -lX11 -lXext -lXmu -lXi -lpthread
+APP_LIB_DEPS = $(EXTRA_LIB_PATH) -lX11 -lXext -lXmu -lXt -lXi -lpthread \
+	-lstdc++ -lm

configs/linux-x86

@@ -4,8 +4,6 @@ include $(TOP)/configs/linux
 
 CONFIG_NAME = linux-x86
 
-ARCH_FLAGS = -m32 -mmmx -msse -msse2
-
 ASM_FLAGS = -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM
-MESA_ASM_SOURCES = $(X86_SOURCES)
-GLAPI_ASM_SOURCES = $(X86_API)
+ASM_SOURCES = $(X86_SOURCES)
+ASM_API = $(X86_API)

configs/linux-x86-64

@@ -6,8 +6,8 @@ CONFIG_NAME = linux-x86-64
 
 ARCH_FLAGS = -m64
 
-MESA_ASM_SOURCES = $(X86-64_SOURCES)
-GLAPI_ASM_SOURCES = $(X86-64_API)
+ASM_SOURCES = $(X86-64_SOURCES)
+ASM_API = $(X86-64_API)
 ASM_FLAGS = -DUSE_X86_64_ASM
 
 LIB_DIR = lib64

configs/linux-x86-64-debug

@@ -4,5 +4,4 @@ include $(TOP)/configs/linux-x86-64
 
 CONFIG_NAME = linux-x86-64-debug
 
-OPT_FLAGS = -g
 DEFINES += -DDEBUG -DDEBUG_MATH

configs/linux-x86-64-profile

@@ -1,8 +0,0 @@
-# Configuration for profiling on Linux for 64-bit X86 (Opteron) with gprof
-
-include $(TOP)/configs/linux-x86-64-static
-
-CONFIG_NAME = linux-x86-64-profile
-
-OPT_FLAGS = -pg -g -O2
-DEFINES += -DNDEBUG

configs/linux-x86-64-static

@@ -20,8 +20,5 @@ OSMESA_LIB_DEPS =
 GLU_LIB_DEPS = 
 GLUT_LIB_DEPS = 
 GLW_LIB_DEPS = 
-
-# Need to specify all libraries we may need
-APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -Wl,--start-group \
-               -l$(GL_LIB) $(TOP)/src/mesa/pipe/softpipe/libsoftpipe.a -Wl,--end-group \
-               $(EXTRA_LIB_PATH) -lX11 -lXext -lXmu -lXt -lXi -lpthread -lstdc++ -lm
+APP_LIB_DEPS = $(EXTRA_LIB_PATH) -lX11 -lXext -lXmu -lXt -lXi -lpthread \
+	-lstdc++ -lm

configs/linux-x86-glide

@@ -0,0 +1,28 @@
+# Configuration for Linux with 3Dfx Glide driver and x86 optimizations
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = linux-x86-glide
+
+# Compiler and flags
+CC = gcc
+CXX = g++
+
+CFLAGS = -Wall -O3 -ansi -pedantic -fPIC -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM -DPTHREADS -I/usr/X11R6/include -DFX -I/usr/include/glide -I/usr/local/glide/include
+
+CXXFLAGS = -Wall -O3 -ansi -pedantic -fPIC -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
+
+GLUT_CFLAGS = -fexceptions
+
+# Work around aliasing bugs - developers should comment this out
+CFLAGS += -fno-strict-aliasing
+CXXFLAGS += -fno-strict-aliasing
+
+ASM_SOURCES = $(X86_SOURCES)
+ASM_API = $(X86_API)
+
+# Library/program dependencies
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -L/usr/local/glide/lib -lglide3x -lm -lpthread
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
+GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -L/usr/X11R6/lib -lXt -lX11
+APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/local/glide/lib -lglide3x -lm

configs/linux-x86-profile

@@ -1,8 +0,0 @@
-# Configuration for profiling on Linux with x86 optimizations with gprof
-
-include $(TOP)/configs/linux-x86-static
-
-CONFIG_NAME = linux-x86-profile
-
-OPT_FLAGS = -pg -g -O2
-DEFINES += -DNDEBUG

configs/linux-x86-static

@@ -20,7 +20,5 @@ OSMESA_LIB_DEPS =
 GLU_LIB_DEPS = 
 GLUT_LIB_DEPS = 
 GLW_LIB_DEPS = 
-
-# Need to specify all libraries we may need
-APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) \
-	-l$(GL_LIB) $(EXTRA_LIB_PATH) -lX11 -lXext -lXmu -lXt -lXi -lpthread -lstdc++ -lm
+APP_LIB_DEPS = $(EXTRA_LIB_PATH) -lX11 -lXext -lXmu -lXt -lXi -lpthread \
+	-lstdc++ -lm

configs/sunos5-gcc

@@ -16,8 +16,8 @@ ARCH_FLAGS ?=
 
 DEFINES = -D_REENTRANT -DUSE_XSHM
 
-MESA_ASM_SOURCES = $(SPARC_SOURCES)
-GLAPI_ASM_SOURCES = $(SPARC_API)
+ASM_SOURCES = $(SPARC_SOURCES)
+ASM_API = $(SPARC_API)
 ASM_FLAGS = -DUSE_SPARC_ASM
 
 CFLAGS   = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \

configure.ac

@@ -5,8 +5,12 @@ AC_PREREQ([2.59])
 dnl Versioning - scrape the version from configs/default
 m4_define([mesa_version],
     [m4_esyscmd([${MAKE-make} -s -f bin/version.mk version | tr -d '\n'])])
-m4_ifval(mesa_version,,
-    [m4_fatal([Failed to get the Mesa version from `make -f bin/version.mk version`])])
+m4_ifval(mesa_version,[],[
+    m4_errprint([Error: Failed to get the Mesa version from the output of
+       running `make -f bin/version.mk version'
+])
+    m4_exit([1])
+])
 
 dnl Tell the user about autoconf.html in the --help output
 m4_divert_once([HELP_END], [
@@ -18,12 +22,8 @@ AC_CONFIG_AUX_DIR([bin])
 AC_CANONICAL_HOST
 
 dnl Versions for external dependencies
-LIBDRM_REQUIRED=2.4.15
-LIBDRM_RADEON_REQUIRED=2.4.17
-DRI2PROTO_REQUIRED=2.1
-GLPROTO_REQUIRED=1.4.11
-LIBDRM_XORG_REQUIRED=2.4.17
-LIBKMS_XORG_REQUIRED=1.0.0
+LIBDRM_REQUIRED=2.4.3
+DRI2PROTO_REQUIRED=1.99.3
 
 dnl Check for progs
 AC_PROG_CPP
@@ -33,11 +33,6 @@ AC_CHECK_PROGS([MAKE], [gmake make])
 AC_PATH_PROG([MKDEP], [makedepend])
 AC_PATH_PROG([SED], [sed])
 
-dnl Our fallback install-sh is a symlink to minstall. Use the existing
-dnl configuration in that case.
-AC_PROG_INSTALL
-test "x$INSTALL" = "x$ac_install_sh" && INSTALL='$(MINSTALL)'
-
 dnl We need a POSIX shell for parts of the build. Assume we have one
 dnl in most cases.
 case "$host_os" in
@@ -48,28 +43,6 @@ solaris*)
     ;;
 esac
 
-dnl If we're using GCC, make sure that it is at least version 3.3.0.  Older
-dnl versions are explictly not supported.
-if test "x$GCC" = xyes; then
-    AC_MSG_CHECKING([whether gcc version is sufficient])
-    major=0
-    minor=0
-
-    GCC_VERSION=`$CC -dumpversion`
-    if test $? -eq 0; then
-        major=`echo $GCC_VERSION | cut -d. -f1`
-        minor=`echo $GCC_VERSION | cut -d. -f1`
-    fi
-
-    if test $major -lt 3 -o $major -eq 3 -a $minor -lt 3 ; then
-        AC_MSG_RESULT([no])
-        AC_MSG_ERROR([If using GCC, version 3.3.0 or later is required.])
-    else
-        AC_MSG_RESULT([yes])
-    fi
-fi
-
-
 MKDEP_OPTIONS=-fdepend
 dnl Ask gcc where it's keeping its secret headers
 if test "x$GCC" = xyes; then
@@ -85,11 +58,15 @@ fi
 AC_SUBST([MKDEP_OPTIONS])
 
 dnl Make sure the pkg-config macros are defined
-m4_ifndef([PKG_PROG_PKG_CONFIG],
-    [m4_fatal([Could not locate the pkg-config autoconf macros.
-  These are usually located in /usr/share/aclocal/pkg.m4. If your macros
-  are in a different location, try setting the environment variable
-  ACLOCAL="aclocal -I/other/macro/dir" before running autoreconf.])])
+m4_ifdef([PKG_PROG_PKG_CONFIG],[],[
+    m4_errprint([Error: Could not locate the pkg-config autoconf macros.
+       These are usually located in /usr/share/aclocal/pkg.m4. If your
+       macros are in a different location, try setting the environment
+       variable ACLOCAL="aclocal -I/other/macro/dir" before running
+       autoreconf.
+])
+    m4_exit([1])
+])
 PKG_PROG_PKG_CONFIG()
 
 dnl LIB_DIR - library basename
@@ -110,28 +87,18 @@ dnl Compiler macros
 DEFINES=""
 AC_SUBST([DEFINES])
 case "$host_os" in
-linux*|*-gnu*|gnu*)
+linux*|*-gnu*)
     DEFINES="$DEFINES -D_GNU_SOURCE -DPTHREADS"
     ;;
 solaris*)
     DEFINES="$DEFINES -DPTHREADS -DSVR4"
     ;;
-cygwin*)
-    DEFINES="$DEFINES -DPTHREADS"
-    ;;
 esac
 
 dnl Add flags for gcc and g++
 if test "x$GCC" = xyes; then
     CFLAGS="$CFLAGS -Wall -Wmissing-prototypes -std=c99 -ffast-math"
 
-    # Enable -fvisibility=hidden if using a gcc that supports it
-    save_CFLAGS="$CFLAGS"
-    AC_MSG_CHECKING([whether $CC supports -fvisibility=hidden])
-    CFLAGS="$CFLAGS -fvisibility=hidden"
-    AC_LINK_IFELSE([AC_LANG_PROGRAM()], AC_MSG_RESULT([yes]),
-		   [CFLAGS="$save_CFLAGS" ; AC_MSG_RESULT([no])]);
-
     # Work around aliasing bugs - developers should comment this out
     CFLAGS="$CFLAGS -fno-strict-aliasing"
 fi
@@ -162,7 +129,6 @@ AC_ARG_ENABLE([32-bit],
 if test "x$enable_32bit" = xyes; then
     if test "x$GCC" = xyes; then
         CFLAGS="$CFLAGS -m32"
-        ARCH_FLAGS="$ARCH_FLAGS -m32"
     fi
     if test "x$GXX" = xyes; then
         CXXFLAGS="$CXXFLAGS -m32"
@@ -259,47 +225,23 @@ dnl
 dnl library names
 dnl
 if test "$enable_static" = yes; then
-    LIB_EXTENSION='a'
+    GL_LIB_NAME='lib$(GL_LIB).a'
+    GLU_LIB_NAME='lib$(GLU_LIB).a'
+    GLUT_LIB_NAME='lib$(GLUT_LIB).a'
+    GLW_LIB_NAME='lib$(GLW_LIB).a'
+    OSMESA_LIB_NAME='lib$(OSMESA_LIB).a'
 else
-    case "$host_os" in
-    darwin* )
-        LIB_EXTENSION='dylib' ;;
-    cygwin* )
-        LIB_EXTENSION='dll' ;;
-    aix* )
-        LIB_EXTENSION='a' ;;
-    * )
-        LIB_EXTENSION='so' ;;
-    esac
+    GL_LIB_NAME='lib$(GL_LIB).so'
+    GLU_LIB_NAME='lib$(GLU_LIB).so'
+    GLUT_LIB_NAME='lib$(GLUT_LIB).so'
+    GLW_LIB_NAME='lib$(GLW_LIB).so'
+    OSMESA_LIB_NAME='lib$(OSMESA_LIB).so'
 fi
-
-GL_LIB_NAME='lib$(GL_LIB).'${LIB_EXTENSION}
-GLU_LIB_NAME='lib$(GLU_LIB).'${LIB_EXTENSION}
-GLUT_LIB_NAME='lib$(GLUT_LIB).'${LIB_EXTENSION}
-GLW_LIB_NAME='lib$(GLW_LIB).'${LIB_EXTENSION}
-OSMESA_LIB_NAME='lib$(OSMESA_LIB).'${LIB_EXTENSION}
-EGL_LIB_NAME='lib$(EGL_LIB).'${LIB_EXTENSION}
-
-GL_LIB_GLOB='lib$(GL_LIB).*'${LIB_EXTENSION}'*'
-GLU_LIB_GLOB='lib$(GLU_LIB).*'${LIB_EXTENSION}'*'
-GLUT_LIB_GLOB='lib$(GLUT_LIB).*'${LIB_EXTENSION}'*'
-GLW_LIB_GLOB='lib$(GLW_LIB).*'${LIB_EXTENSION}'*'
-OSMESA_LIB_GLOB='lib$(OSMESA_LIB).*'${LIB_EXTENSION}'*'
-EGL_LIB_GLOB='lib$(EGL_LIB).*'${LIB_EXTENSION}'*'
-
 AC_SUBST([GL_LIB_NAME])
 AC_SUBST([GLU_LIB_NAME])
 AC_SUBST([GLUT_LIB_NAME])
 AC_SUBST([GLW_LIB_NAME])
 AC_SUBST([OSMESA_LIB_NAME])
-AC_SUBST([EGL_LIB_NAME])
-
-AC_SUBST([GL_LIB_GLOB])
-AC_SUBST([GLU_LIB_GLOB])
-AC_SUBST([GLUT_LIB_GLOB])
-AC_SUBST([GLW_LIB_GLOB])
-AC_SUBST([OSMESA_LIB_GLOB])
-AC_SUBST([EGL_LIB_GLOB])
 
 dnl
 dnl Arch/platform-specific settings
@@ -312,8 +254,8 @@ AC_ARG_ENABLE([asm],
 )
 asm_arch=""
 ASM_FLAGS=""
-MESA_ASM_SOURCES=""
-GLAPI_ASM_SOURCES=""
+ASM_SOURCES=""
+ASM_API=""
 AC_MSG_CHECKING([whether to enable assembly])
 test "x$enable_asm" = xno && AC_MSG_RESULT([no])
 # disable if cross compiling on x86/x86_64 since we must run gen_matypes
@@ -349,47 +291,34 @@ if test "x$enable_asm" = xyes; then
             ;;
         esac
         ;;
-    sparc*)
-        case "$host_os" in
-        linux*)
-            asm_arch=sparc
-            ;;
-        esac
-        ;;
     esac
 
     case "$asm_arch" in
     x86)
         ASM_FLAGS="-DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM"
-        MESA_ASM_SOURCES='$(X86_SOURCES)'
-        GLAPI_ASM_SOURCES='$(X86_API)'
+        ASM_SOURCES='$(X86_SOURCES)'
+        ASM_API='$(X86_API)'
         AC_MSG_RESULT([yes, x86])
         ;;
     x86_64)
         ASM_FLAGS="-DUSE_X86_64_ASM"
-        MESA_ASM_SOURCES='$(X86-64_SOURCES)'
-        GLAPI_ASM_SOURCES='$(X86-64_API)'
+        ASM_SOURCES='$(X86-64_SOURCES)'
+        ASM_API='$(X86-64_API)'
         AC_MSG_RESULT([yes, x86_64])
         ;;
     ppc)
         ASM_FLAGS="-DUSE_PPC_ASM -DUSE_VMX_ASM"
-        MESA_ASM_SOURCES='$(PPC_SOURCES)'
+        ASM_SOURCES='$(PPC_SOURCES)'
         AC_MSG_RESULT([yes, ppc])
         ;;
-    sparc)
-        ASM_FLAGS="-DUSE_SPARC_ASM"
-        MESA_ASM_SOURCES='$(SPARC_SOURCES)'
-        GLAPI_ASM_SOURCES='$(SPARC_API)'
-        AC_MSG_RESULT([yes, sparc])
-        ;;
     *)
         AC_MSG_RESULT([no, platform not supported])
         ;;
     esac
 fi
 AC_SUBST([ASM_FLAGS])
-AC_SUBST([MESA_ASM_SOURCES])
-AC_SUBST([GLAPI_ASM_SOURCES])
+AC_SUBST([ASM_SOURCES])
+AC_SUBST([ASM_API])
 
 dnl PIC code macro
 MESA_PIC_FLAGS
@@ -419,7 +348,7 @@ fi
 
 dnl
 dnl Driver configuration. Options are xlib, dri and osmesa right now.
-dnl More later: fbdev, ...
+dnl More later: directfb, fbdev, ...
 dnl
 default_driver="xlib"
 
@@ -431,7 +360,7 @@ linux*)
     ;;
 *freebsd* | dragonfly*)
     case "$host_cpu" in
-    i*86|x86_64|powerpc*|sparc*) default_driver="dri";;
+    i*86|x86_64) default_driver="dri";;
     esac
     ;;
 esac
@@ -453,29 +382,17 @@ esac
 dnl
 dnl Driver specific build directories
 dnl
-
-dnl this variable will be prepended to SRC_DIRS and is not exported
-CORE_DIRS="glsl mesa"
-
-SRC_DIRS="glew"
+SRC_DIRS="mesa"
 GLU_DIRS="sgi"
 WINDOW_SYSTEM=""
-GALLIUM_DIRS="auxiliary drivers state_trackers"
-GALLIUM_WINSYS_DIRS=""
-GALLIUM_WINSYS_DRM_DIRS=""
-GALLIUM_DRIVERS_DIRS="softpipe failover trace identity"
-GALLIUM_STATE_TRACKERS_DIRS=""
-
 case "$mesa_driver" in
 xlib)
     DRIVER_DIRS="x11"
-    GALLIUM_WINSYS_DIRS="$GALLIUM_WINSYS_DIRS xlib"
     ;;
 dri)
-    SRC_DIRS="$SRC_DIRS glx"
+    SRC_DIRS="glx/x11 $SRC_DIRS"
     DRIVER_DIRS="dri"
     WINDOW_SYSTEM="dri"
-    GALLIUM_WINSYS_DIRS="$GALLIUM_WINSYS_DIRS drm"
     ;;
 osmesa)
     DRIVER_DIRS="osmesa"
@@ -485,11 +402,6 @@ AC_SUBST([SRC_DIRS])
 AC_SUBST([GLU_DIRS])
 AC_SUBST([DRIVER_DIRS])
 AC_SUBST([WINDOW_SYSTEM])
-AC_SUBST([GALLIUM_DIRS])
-AC_SUBST([GALLIUM_WINSYS_DIRS])
-AC_SUBST([GALLIUM_WINSYS_DRM_DIRS])
-AC_SUBST([GALLIUM_DRIVERS_DIRS])
-AC_SUBST([GALLIUM_STATE_TRACKERS_DIRS])
 
 dnl
 dnl User supplied program configuration
@@ -547,14 +459,8 @@ else
     x11_pkgconfig=no
 fi
 dnl Use the autoconf macro if no pkg-config files
-if test "$x11_pkgconfig" = yes; then
-    PKG_CHECK_MODULES([X11], [x11])
-else
+if test "$x11_pkgconfig" = no; then
     AC_PATH_XTRA
-    test -z "$X11_CFLAGS" && X11_CFLAGS="$X_CFLAGS"
-    test -z "$X11_LIBS" && X11_LIBS="$X_LIBS -lX11"
-    AC_SUBST([X11_CFLAGS])
-    AC_SUBST([X11_LIBS])
 fi
 
 dnl Try to tell the user that the --x-* options are only used when
@@ -620,8 +526,7 @@ dri)
     # Check for libdrm
     PKG_CHECK_MODULES([LIBDRM], [libdrm >= $LIBDRM_REQUIRED])
     PKG_CHECK_MODULES([DRI2PROTO], [dri2proto >= $DRI2PROTO_REQUIRED])
-    PKG_CHECK_MODULES([GLPROTO], [glproto >= $GLPROTO_REQUIRED])
-    GL_PC_REQ_PRIV="libdrm >= $LIBDRM_REQUIRED dri2proto >= $DRI2PROTO_REQUIRED glproto >= $GLPROTO_REQUIRED"
+    GL_PC_REQ_PRIV="libdrm >= $LIBDRM_REQUIRED dri2proto >= $DRI2PROTO_REQUIRED"
     DRI_PC_REQ_PRIV="libdrm >= $LIBDRM_REQUIRED"
 
     # find the DRI deps for libGL
@@ -689,13 +594,6 @@ AC_ARG_WITH([dri-driverdir],
     [DRI_DRIVER_INSTALL_DIR="$withval"],
     [DRI_DRIVER_INSTALL_DIR='${libdir}/dri'])
 AC_SUBST([DRI_DRIVER_INSTALL_DIR])
-dnl Extra search path for DRI drivers
-AC_ARG_WITH([dri-searchpath],
-    [AS_HELP_STRING([--with-dri-searchpath=DIRS...],
-        [semicolon delimited DRI driver search directories @<:@${libdir}/dri@:>@])],
-    [DRI_DRIVER_SEARCH_DIR="$withval"],
-    [DRI_DRIVER_SEARCH_DIR='${DRI_DRIVER_INSTALL_DIR}'])
-AC_SUBST([DRI_DRIVER_SEARCH_DIR])
 dnl Direct rendering or just indirect rendering
 AC_ARG_ENABLE([driglx-direct],
     [AS_HELP_STRING([--disable-driglx-direct],
@@ -706,7 +604,7 @@ dnl Which drivers to build - default is chosen by platform
 AC_ARG_WITH([dri-drivers],
     [AS_HELP_STRING([--with-dri-drivers@<:@=DIRS...@:>@],
         [comma delimited DRI drivers list, e.g.
-        "swrast,i965,radeon" @<:@default=auto@:>@])],
+        "swrast,i965,radeon,nouveau" @<:@default=auto@:>@])],
     [with_dri_drivers="$withval"],
     [with_dri_drivers=yes])
 if test "x$with_dri_drivers" = x; then
@@ -732,6 +630,10 @@ yes)
     ;;
 esac
 
+dnl Just default to no EGL for now
+USING_EGL=0
+AC_SUBST([USING_EGL])
+
 dnl Set DRI_DIRS, DEFINES and LIB_DEPS
 if test "$mesa_driver" = dri; then
     # Use TLS in GLX?
@@ -739,22 +641,27 @@ if test "$mesa_driver" = dri; then
         DEFINES="$DEFINES -DGLX_USE_TLS -DPTHREADS"
     fi
 
+    if test "x$USING_EGL" = x1; then
+        PROGRAM_DIRS="egl"
+    fi
+
     # Platform specific settings and drivers to build
     case "$host_os" in
     linux*)
         DEFINES="$DEFINES -DUSE_EXTERNAL_DXTN_LIB=1 -DIN_DRI_DRIVER"
+        DEFINES="$DEFINES -DGLX_INDIRECT_RENDERING -DHAVE_ALIAS"
         if test "x$driglx_direct" = xyes; then
             DEFINES="$DEFINES -DGLX_DIRECT_RENDERING"
         fi
-        DEFINES="$DEFINES -DGLX_INDIRECT_RENDERING -DHAVE_ALIAS"
 
         case "$host_cpu" in
         x86_64)
-            # sis is missing because they have not be converted to use
-            # the new interface.  i810 are missing because there is no
-            # x86-64 system where they could *ever* be used.
+            # ffb, gamma, and sis are missing because they have not be
+            # converted to use the new interface.  i810 are missing
+            # because there is no x86-64 system where they could *ever*
+            # be used.
             if test "x$DRI_DIRS" = "xyes"; then
-                DRI_DIRS="i915 i965 mach64 mga r128 r200 r300 r600 radeon \
+                DRI_DIRS="i915 i965 mach64 mga r128 r200 r300 radeon \
                     savage tdfx unichrome swrast"
             fi
             ;;
@@ -762,13 +669,13 @@ if test "$mesa_driver" = dri; then
             # Build only the drivers for cards that exist on PowerPC.
             # At some point MGA will be added, but not yet.
             if test "x$DRI_DIRS" = "xyes"; then
-                DRI_DIRS="mach64 r128 r200 r300 r600 radeon tdfx swrast"
+                DRI_DIRS="mach64 r128 r200 r300 radeon tdfx swrast"
             fi
             ;;
         sparc*)
             # Build only the drivers for cards that exist on sparc`
             if test "x$DRI_DIRS" = "xyes"; then
-                DRI_DIRS="mach64 r128 r200 r300 r600 radeon swrast"
+                DRI_DIRS="mach64 r128 r200 r300 radeon ffb swrast"
             fi
             ;;
         esac
@@ -784,15 +691,13 @@ if test "$mesa_driver" = dri; then
             CXXFLAGS="$CXXFLAGS -ansi -pedantic"
         fi
 
+        # ffb and gamma are missing because they have not been converted
+        # to use the new interface.
         if test "x$DRI_DIRS" = "xyes"; then
-            DRI_DIRS="i810 i915 i965 mach64 mga r128 r200 r300 r600 radeon tdfx \
+            DRI_DIRS="i810 i915 i965 mach64 mga r128 r200 r300 radeon tdfx \
                 unichrome savage sis swrast"
         fi
         ;;
-    gnu*)
-        DEFINES="$DEFINES -DUSE_EXTERNAL_DXTN_LIB=1 -DIN_DRI_DRIVER"
-        DEFINES="$DEFINES -DGLX_INDIRECT_RENDERING -DHAVE_ALIAS"
-	;;
     solaris*)
         DEFINES="$DEFINES -DUSE_EXTERNAL_DXTN_LIB=1 -DIN_DRI_DRIVER"
         DEFINES="$DEFINES -DGLX_INDIRECT_RENDERING"
@@ -804,8 +709,8 @@ if test "$mesa_driver" = dri; then
 
     # default drivers
     if test "x$DRI_DIRS" = "xyes"; then
-        DRI_DIRS="i810 i915 i965 mach64 mga r128 r200 r300 r600 radeon \
-            savage sis tdfx unichrome swrast"
+        DRI_DIRS="i810 i915 i965 mach64 mga r128 r200 r300 radeon s3v \
+            savage sis tdfx trident unichrome ffb swrast"
     fi
 
     DRI_DIRS=`echo "$DRI_DIRS" | $SED 's/  */ /g'`
@@ -832,29 +737,6 @@ AC_SUBST([DRI_DIRS])
 AC_SUBST([EXPAT_INCLUDES])
 AC_SUBST([DRI_LIB_DEPS])
 
-case $DRI_DIRS in
-*i915*|*i965*)
-    PKG_CHECK_MODULES([INTEL], [libdrm_intel >= 2.4.19])
-    ;;
-esac
-
-case $DRI_DIRS in
-*radeon*|*r200*|*r300*|*r600*)
-    PKG_CHECK_MODULES([LIBDRM_RADEON],
-		      [libdrm_radeon libdrm >= $LIBDRM_RADEON_REQUIRED],
-		      HAVE_LIBDRM_RADEON=yes,
-		      HAVE_LIBDRM_RADEON=no)
-
-    if test "$HAVE_LIBDRM_RADEON" = yes; then
-	RADEON_CFLAGS="-DHAVE_LIBDRM_RADEON=1 $LIBDRM_RADEON_CFLAGS"
-	RADEON_LDFLAGS=$LIBDRM_RADEON_LIBS
-    fi
-    ;;
-esac
-AC_SUBST([RADEON_CFLAGS])
-AC_SUBST([RADEON_LDFLAGS])
-
-
 dnl
 dnl OSMesa configuration
 dnl
@@ -904,12 +786,12 @@ case "$mesa_driver" in
 osmesa)
     # only link libraries with osmesa if shared
     if test "$enable_static" = no; then
-        OSMESA_LIB_DEPS="-lm -lpthread $SELINUX_LIBS $DLOPEN_LIBS"
+        OSMESA_LIB_DEPS="-lm -lpthread $SELINUX_LIBS"
     else
         OSMESA_LIB_DEPS=""
     fi
     OSMESA_MESA_DEPS=""
-    OSMESA_PC_LIB_PRIV="-lm -lpthread $SELINUX_LIBS $DLOPEN_LIBS"
+    OSMESA_PC_LIB_PRIV="-lm -lpthread $SELINUX_LIBS"
     ;;
 *)
     # Link OSMesa to libGL otherwise
@@ -923,45 +805,15 @@ osmesa)
     OSMESA_PC_REQ="gl"
     ;;
 esac
+if test "$enable_static" = no; then
+    OSMESA_LIB_DEPS="$OSMESA_LIB_DEPS"
+fi
 OSMESA_PC_LIB_PRIV="$OSMESA_PC_LIB_PRIV"
 AC_SUBST([OSMESA_LIB_DEPS])
 AC_SUBST([OSMESA_MESA_DEPS])
 AC_SUBST([OSMESA_PC_REQ])
 AC_SUBST([OSMESA_PC_LIB_PRIV])
 
-dnl
-dnl EGL configuration
-dnl
-AC_ARG_ENABLE([egl],
-    [AS_HELP_STRING([--disable-egl],
-        [disable EGL library @<:@default=enabled@:>@])],
-    [enable_egl="$enableval"],
-    [enable_egl=yes])
-if test "x$enable_egl" = xyes; then
-    SRC_DIRS="$SRC_DIRS egl"
-    EGL_LIB_DEPS="$DLOPEN_LIBS -lpthread"
-    EGL_DRIVERS_DIRS=""
-    if test "$enable_static" != yes; then
-        # build egl_glx when libGL is built
-        if test "$mesa_driver" != osmesa; then
-            EGL_DRIVERS_DIRS="glx"
-        fi
-
-        # build egl_dri2 when xcb-dri2 is available
-        PKG_CHECK_MODULES([EGL_DRI2], [x11-xcb xcb-dri2 xcb-xfixes libdrm],
-			  [have_xcb_dri2=yes],[have_xcb_dri2=no])
-        if test "$have_xcb_dri2" = yes; then
-            EGL_DRIVERS_DIRS="$EGL_DRIVERS_DIRS dri2"
-        fi
-    fi
-
-    if test "$with_demos" = yes; then
-        PROGRAM_DIRS="$PROGRAM_DIRS egl"
-    fi
-fi
-AC_SUBST([EGL_LIB_DEPS])
-AC_SUBST([EGL_DRIVERS_DIRS])
-
 dnl
 dnl GLU configuration
 dnl
@@ -1162,9 +1014,6 @@ if test "x$APP_LIB_DEPS" = x; then
     solaris*)
         APP_LIB_DEPS="-lX11 -lsocket -lnsl -lm"
         ;;
-    cygwin*)
-        APP_LIB_DEPS="-lX11"
-        ;;
     *)
         APP_LIB_DEPS="-lm"
         ;;
@@ -1173,214 +1022,6 @@ fi
 AC_SUBST([APP_LIB_DEPS])
 AC_SUBST([PROGRAM_DIRS])
 
-dnl
-dnl Gallium configuration
-dnl
-AC_ARG_ENABLE([gallium],
-    [AS_HELP_STRING([--disable-gallium],
-        [build gallium @<:@default=enabled@:>@])],
-    [enable_gallium="$enableval"],
-    [enable_gallium=yes])
-if test "x$enable_gallium" = xyes; then
-    SRC_DIRS="$SRC_DIRS gallium gallium/winsys"
-fi
-
-dnl
-dnl Gallium state trackers configuration
-dnl
-AC_ARG_WITH([state-trackers],
-    [AS_HELP_STRING([--with-state-trackers@<:@=DIRS...@:>@],
-        [comma delimited state_trackers list, e.g.
-        "egl,glx" @<:@default=auto@:>@])],
-    [with_state_trackers="$withval"],
-    [with_state_trackers=yes])
-
-case "$with_state_trackers" in
-no)
-    GALLIUM_STATE_TRACKERS_DIRS=""
-    ;;
-yes)
-    # look at what else is built
-    case "$mesa_driver" in
-    xlib)
-        GALLIUM_STATE_TRACKERS_DIRS=glx
-        ;;
-    dri)
-        GALLIUM_STATE_TRACKERS_DIRS="dri"
-        if test "x$enable_egl" = xyes; then
-            GALLIUM_STATE_TRACKERS_DIRS="$GALLIUM_STATE_TRACKERS_DIRS egl"
-        fi
-        # Have only tested st/xorg on 1.6.0 servers
-        PKG_CHECK_MODULES(XORG, [xorg-server >= 1.6.0 libdrm >= $LIBDRM_XORG_REQUIRED libkms >= $LIBKMS_XORG_REQUIRED],
-            HAVE_XORG="yes"; GALLIUM_STATE_TRACKERS_DIRS="$GALLIUM_STATE_TRACKERS_DIRS xorg",
-            HAVE_XORG="no")
-        ;;
-    esac
-    ;;
-*)
-    # verify the requested state tracker exist
-    state_trackers=`IFS=', '; echo $with_state_trackers`
-    for tracker in $state_trackers; do
-        test -d "$srcdir/src/gallium/state_trackers/$tracker" || \
-            AC_MSG_ERROR([state tracker '$tracker' doesn't exist])
-
-        case "$tracker" in
-        egl)
-            if test "x$enable_egl" != xyes; then
-                AC_MSG_ERROR([cannot build egl state tracker without EGL library])
-            fi
-            ;;
-        xorg)
-            PKG_CHECK_MODULES([LIBDRM_XORG], [libdrm >= $LIBDRM_XORG_REQUIRED])
-            PKG_CHECK_MODULES([LIBKMS_XORG], [libkms >= $LIBKMS_XORG_REQUIRED])
-            HAVE_XORG="yes"
-            ;;
-        es)
-            # mesa/es is required to build es state tracker
-            CORE_DIRS="$CORE_DIRS mesa/es"
-            ;;
-        esac
-    done
-    GALLIUM_STATE_TRACKERS_DIRS="$state_trackers"
-    ;;
-esac
-
-if test "x$HAVE_XORG" = xyes; then
-    PKG_CHECK_MODULES(XEXT, [xextproto >= 7.0.99.1],
-        HAVE_XEXTPROTO_71="yes"; DEFINES="$DEFINES -DHAVE_XEXTPROTO_71",
-        HAVE_XEXTPROTO_71="no")
-fi
-
-AC_ARG_WITH([egl-displays],
-    [AS_HELP_STRING([--with-egl-displays@<:@=DIRS...@:>@],
-        [comma delimited native displays libEGL supports, e.g.
-        "x11,kms" @<:@default=auto@:>@])],
-    [with_egl_displays="$withval"],
-    [with_egl_displays=yes])
-
-EGL_DISPLAYS=""
-case "$with_egl_displays" in
-yes)
-    if test "x$enable_egl" = xyes && test "x$mesa_driver" != xosmesa; then
-        EGL_DISPLAYS="x11"
-    fi
-    ;;
-*)
-    if test "x$enable_egl" != xyes; then
-        AC_MSG_ERROR([cannot build egl state tracker without EGL library])
-    fi
-    # verify the requested driver directories exist
-    egl_displays=`IFS=', '; echo $with_egl_displays`
-    for dpy in $egl_displays; do
-        test -d "$srcdir/src/gallium/state_trackers/egl/$dpy" || \
-            AC_MSG_ERROR([EGL display '$dpy' does't exist])
-    done
-    EGL_DISPLAYS="$egl_displays"
-    ;;
-esac
-AC_SUBST([EGL_DISPLAYS])
-
-AC_ARG_WITH([egl-driver-dir],
-    [AS_HELP_STRING([--with-egl-driver-dir=DIR],
-                    [directory for EGL drivers [[default=${libdir}/egl]]])],
-    [EGL_DRIVER_INSTALL_DIR="$withval"],
-    [EGL_DRIVER_INSTALL_DIR='${libdir}/egl'])
-AC_SUBST([EGL_DRIVER_INSTALL_DIR])
-
-AC_ARG_WITH([xorg-driver-dir],
-    [AS_HELP_STRING([--with-xorg-driver-dir=DIR],
-                    [Default xorg driver directory[[default=${libdir}/xorg/modules/drivers]]])],
-    [XORG_DRIVER_INSTALL_DIR="$withval"],
-    [XORG_DRIVER_INSTALL_DIR="${libdir}/xorg/modules/drivers"])
-AC_SUBST([XORG_DRIVER_INSTALL_DIR])
-
-AC_ARG_WITH([max-width],
-    [AS_HELP_STRING([--with-max-width=N],
-                    [Maximum framebuffer width (4096)])],
-    [DEFINES="${DEFINES} -DMAX_WIDTH=${withval}";
-     AS_IF([test "${withval}" -gt "4096"],
-           [AC_MSG_WARN([Large framebuffer: see s_tritemp.h comments.])])]
-)
-AC_ARG_WITH([max-height],
-    [AS_HELP_STRING([--with-max-height=N],
-                    [Maximum framebuffer height (4096)])],
-    [DEFINES="${DEFINES} -DMAX_HEIGHT=${withval}";
-     AS_IF([test "${withval}" -gt "4096"],
-           [AC_MSG_WARN([Large framebuffer: see s_tritemp.h comments.])])]
-)
-
-dnl
-dnl Gallium SVGA configuration
-dnl
-AC_ARG_ENABLE([gallium-svga],
-    [AS_HELP_STRING([--enable-gallium-svga],
-        [build gallium SVGA @<:@default=disabled@:>@])],
-    [enable_gallium_svga="$enableval"],
-    [enable_gallium_svga=auto])
-if test "x$enable_gallium_svga" = xyes; then
-    GALLIUM_WINSYS_DRM_DIRS="$GALLIUM_WINSYS_DRM_DIRS vmware"
-    GALLIUM_DRIVERS_DIRS="$GALLIUM_DRIVERS_DIRS svga"
-elif test "x$enable_gallium_svga" = xauto; then
-    GALLIUM_DRIVERS_DIRS="$GALLIUM_DRIVERS_DIRS svga"
-fi
-
-dnl
-dnl Gallium Intel configuration
-dnl
-AC_ARG_ENABLE([gallium-intel],
-    [AS_HELP_STRING([--enable-gallium-intel],
-        [build gallium intel @<:@default=disabled@:>@])],
-    [enable_gallium_intel="$enableval"],
-    [enable_gallium_intel=auto])
-if test "x$enable_gallium_intel" = xyes; then
-    GALLIUM_WINSYS_DRM_DIRS="$GALLIUM_WINSYS_DRM_DIRS intel i965"
-    GALLIUM_DRIVERS_DIRS="$GALLIUM_DRIVERS_DIRS i915 i965"
-elif test "x$enable_gallium_intel" = xauto; then
-    GALLIUM_DRIVERS_DIRS="$GALLIUM_DRIVERS_DIRS i915 i965"
-fi
-
-dnl
-dnl Gallium Radeon configuration
-dnl
-AC_ARG_ENABLE([gallium-radeon],
-    [AS_HELP_STRING([--enable-gallium-radeon],
-        [build gallium radeon @<:@default=disabled@:>@])],
-    [enable_gallium_radeon="$enableval"],
-    [enable_gallium_radeon=auto])
-if test "x$enable_gallium_radeon" = xyes; then
-    GALLIUM_WINSYS_DRM_DIRS="$GALLIUM_WINSYS_DRM_DIRS radeon"
-    GALLIUM_DRIVERS_DIRS="$GALLIUM_DRIVERS_DIRS r300"
-elif test "x$enable_gallium_radeon" = xauto; then
-    GALLIUM_DRIVERS_DIRS="$GALLIUM_DRIVERS_DIRS r300"
-fi
-
-dnl
-dnl Gallium Nouveau configuration
-dnl
-AC_ARG_ENABLE([gallium-nouveau],
-    [AS_HELP_STRING([--enable-gallium-nouveau],
-        [build gallium nouveau @<:@default=disabled@:>@])],
-    [enable_gallium_nouveau="$enableval"],
-    [enable_gallium_nouveau=no])
-if test "x$enable_gallium_nouveau" = xyes; then
-    GALLIUM_WINSYS_DRM_DIRS="$GALLIUM_WINSYS_DRM_DIRS nouveau"
-    GALLIUM_DRIVERS_DIRS="$GALLIUM_DRIVERS_DIRS nouveau nv30 nv40 nv50"
-fi
-
-dnl
-dnl Gallium swrast configuration
-dnl
-AC_ARG_ENABLE([gallium-swrast],
-    [AS_HELP_STRING([--enable-gallium-swrast],
-        [build gallium swrast @<:@default=disabled@:>@])],
-    [enable_gallium_swrast="$enableval"],
-    [enable_gallium_swrast=auto])
-if test "x$enable_gallium_swrast" = xyes; then
-    GALLIUM_WINSYS_DRM_DIRS="$GALLIUM_WINSYS_DRM_DIRS swrast"
-fi
-
-dnl prepend CORE_DIRS to SRC_DIRS
-SRC_DIRS="$CORE_DIRS $SRC_DIRS"
 
 dnl Restore LDFLAGS and CPPFLAGS
 LDFLAGS="$_SAVE_LDFLAGS"
@@ -1428,27 +1069,10 @@ fi
 fi
 echo "        Use XCB:         $enable_xcb"
 
-echo ""
-if echo "$SRC_DIRS" | grep 'gallium' >/dev/null 2>&1; then
-    echo "        Gallium:         yes"
-    echo "        Gallium dirs:    $GALLIUM_DIRS"
-    echo "        Winsys dirs:     $GALLIUM_WINSYS_DIRS"
-    echo "        Winsys drm dirs:$GALLIUM_WINSYS_DRM_DIRS"
-    echo "        Driver dirs:     $GALLIUM_DRIVERS_DIRS"
-    echo "        Trackers dirs:   $GALLIUM_STATE_TRACKERS_DIRS"
-else
-    echo "        Gallium:         no"
-fi
-
 dnl Libraries
 echo ""
 echo "        Shared libs:     $enable_shared"
 echo "        Static libs:     $enable_static"
-if test "$enable_egl" = yes; then
-    echo "        EGL:             $EGL_DRIVERS_DIRS"
-else
-    echo "        EGL:             no"
-fi
 echo "        GLU:             $enable_glu"
 echo "        GLw:             $enable_glw (Motif: $enable_motif)"
 echo "        glut:            $enable_glut"

descrip.mms

@@ -0,0 +1,22 @@
+# Makefile for Mesa for VMS
+# contributed by Jouk Jansen  joukj@hrem.stm.tudelft.nl
+
+macro : 
+        @ macro=""
+.ifdef NOSHARE
+.else
+	@ if f$getsyi("HW_MODEL") .ge. 1024 then macro= "/MACRO=(SHARE=1)"
+.endif
+	$(MMS)$(MMSQUALIFIERS)'macro' all
+
+all :
+	if f$search("lib.dir") .eqs. "" then create/directory [.lib]
+	set default [.src]
+	$(MMS)$(MMSQUALIFIERS)
+	set default [-.progs.util]
+	$(MMS)$(MMSQUALIFIERS)
+	set default [-.demos]
+	$(MMS)$(MMSQUALIFIERS)
+	set default [-.xdemos]
+	$(MMS)$(MMSQUALIFIERS)
+	if f$search("[-]tests.DIR") .nes. "" then pipe set default [-.tests] ; $(MMS)$(MMSQUALIFIERS)

docs/GL3.txt

@@ -1,69 +0,0 @@
-
-Status of OpenGL 3.x features in Mesa
-
-
-Note: when an item is marked as "DONE" it means all the core Mesa
-infrastructure is complete but it may be the case that few (if any) drivers
-implement the features.
-
-
-Feature                                               Status
------------------------------------------------------ ------------------------
-
-GL 3.0:
-
-GLSL changes (GL_EXT_gpu_shader4, etc)                not started
-Conditional rendering (GL_NV_conditional_render)      DONE (swrast & softpipe)
-Map buffer subranges (GL_APPLE_flush_buffer_range)    not started
-Float textures, renderbuffers                         some infrastructure done
-Framebuffer objects (GL_EXT_framebuffer_object)       DONE
-Half-float                                            some infrastructure done
-Multisample blit                                      DONE
-Non-normalized Integer texture/framebuffer formats    not started
-1D/2D Texture arrays                                  core Mesa, swrast done
-Packed depth/stencil formats                          DONE
-Per-buffer blend and masks (GL_EXT_draw_buffers2)     DONE
-GL_EXT_texture_compression_rgtc                       not started
-Red and red/green texture formats                     Ian?
-Transform feedback (GL_EXT_transform_feedback)        not started
-Vertex array objects (GL_APPLE_vertex_array_object)   DONE
-sRGB framebuffer format (GL_EXT_framebuffer_sRGB)     not started
-glClearBuffer commands                                DONE, except for dispatch
-glGetStringi command                                  DONE, except for dispatch
-glTexParameterI, glGetTexParameterI commands          DONE, except for dispatch
-glVertexAttribI commands                              not started
-glBindFragDataLocation, glGetFragDataLocation cmds    not started
-glBindBufferRange, glBindBufferBase commands          not started
-
-
-GL 3.1:
-
-GLSL 1.30 and 1.40                                    not started
-Instanced drawing (GL_ARB_draw_instanced)             not started
-Buffer copying (GL_ARB_copy_buffer)                   DONE
-Primitive restart (GL_NV_primitive_restart)           not started
-16 vertex texture image units                         not started
-Texture buffer objs (GL_ARB_textur_buffer_object)     not started
-Rectangular textures (GL_ARB_texture_rectangle)       DONE
-Uniform buffer objs (GL_ARB_uniform_buffer_object)    not started
-Signed normalized texture formats                     not started
-
-
-GL 3.2:
-
-Core/compatibility profiles                           not started
-GLSL 1.50                                             not started
-Geometry shaders (GL_ARB_geometry_shader4)            partially done (Zack)
-BGRA vertex order (GL_ARB_vertex_array_bgra)          DONE
-Base vertex offset(GL_ARB_draw_elements_base_vertex)  DONE
-Frag shader coord (GL_ARB_fragment_coord_conventions) not started
-Provoking vertex (GL_ARB_provoking_vertex)            DONE
-Seamless cubemaps (GL_ARB_seamless_cube_map)          DONE, mostly?
-Multisample textures (GL_ARB_texture_multisample)     not started
-Frag depth clamp (GL_ARB_depth_clamp)                 DONE
-Fence objects (GL_ARB_sync)                           DONE
-
-
-
-More info about these features and the work involved can be found at
-http://dri.freedesktop.org/wiki/MissingFunctionality

docs/MESA_shader_debug.spec

@@ -13,7 +13,7 @@ Contact
 
 Status
 
-    Obsolete.
+    XXX - Not complete yet!!!
 
 Version
 

docs/MESA_swap_control.spec

@@ -43,7 +43,7 @@ Issues
 
 New Procedures and Functions
 
-    int glXSwapIntervalMESA(unsigned int interval)
+    int glXSwapIntervalMESA(int interval)
     int glXGetSwapIntervalMESA(void)
 
 New Tokens
@@ -103,8 +103,11 @@ Additions to the GLX 1.3 Specification
 
 Errors
 
+    glXSwapIntervalMESA returns GLX_BAD_VALUE if parameter <interval> is
+    less than zero.
+
     glXSwapIntervalMESA returns GLX_BAD_CONTEXT if there is no current
-    GLXContext or if the current context is not a direct rendering context.
+    GLXContext.
 
 GLX Protocol
 

docs/MESA_texture_signed_rgba.spec

@@ -1,214 +0,0 @@
-Name
-
-    MESA_texture_signed_rgba
-
-Name Strings
-
-    GL_MESA_texture_signed_rgba
-
-Contact
-
-
-
-Notice
-
-
-
-IP Status
-
-    No known IP issues
-
-Status
-
-
-
-Version
-
-    0.3, 2009-03-24
-
-Number
-
-    Not assigned ?
-
-Dependencies
-
-    Written based on the wording of the OpenGL 2.0 specification.
-
-    This extension trivially interacts with ARB_texture_float.
-    This extension shares some language with ARB_texture_compression_rgtc
-    but does not depend on it.
-
-Overview
-
-    OpenGL prior to 3.1 does not support any signed texture formats.
-    ARB_texture_compression_rgtc introduces some compressed red and
-    red_green signed formats but no uncompressed ones, which might
-    still be useful. NV_texture_shader adds signed texture formats,
-    but also a lot of functionality which has been superceded by fragment
-    shaders.
-    It is usually possible to get the same functionality
-    using a unsigned format by doing scale and bias in a shader, but this
-    is undesirable since modern hardware has direct support for this.
-    This extension adds a signed 4-channel texture format by backporting
-    the relevant features from OpenGL 3.1, as a means to support this in
-    OpenGL implementations only supporting older versions.
-
-Issues
-
-    1) What should this extension be called?
-
-       RESOLVED: MESA_texture_signed_rgba seems reasonable.
-       The rgba part is there because only 4 channel format is supported.
-
-
-    2) Should the full set of signed formats (alpha, luminance, rgb, etc.)
-       be supported?
-
-       RESOLVED: NO. To keep this extension simple, only add the most
-       universal format, rgba. alpha/luminance can't be trivially supported
-       since OpenGL 3.1 does not support them any longer, and there is some
-       implied dependency on ARB_texture_rg for red/red_green formats so
-       avoid all this. Likewise, only 8 bits per channel is supported.
-
-
-    3) Should this extension use new enums for the texture formats?
-
-       RESOLVED: NO. Same enums as those used in OpenGL 3.1.
-
-
-    4) How are signed integer values mapped to floating-point values?
-
-       RESOLVED: Same as described in issue 5) of
-       ARB_texture_compression_rgtc (quote):
-       A signed 8-bit two's complement value X is computed to
-       a floating-point value Xf with the formula:
-
-                { X / 127.0, X > -128
-           Xf = {
-                { -1.0,      X == -128
-
-       This conversion means -1, 0, and +1 are all exactly representable,
-       however -128 and -127 both map to -1.0.  Mapping -128 to -1.0
-       avoids the numerical awkwardness of have a representable value
-       slightly more negative than -1.0.
-
-       This conversion is intentionally NOT the "byte" conversion listed
-       in Table 2.9 for component conversions.  That conversion says:
-
-           Xf = (2*X + 1) / 255.0
-
-       The Table 2.9 conversion is incapable of exactly representing
-       zero.
-
-       (Difference to ARB_texture_compression_rgtc):
-       This is the same mapping as OpenGL 3.1 uses.
-       This is also different to what NV_texture_shader used.
-       The above mapping should be considered the reference, but there
-       is some leeway so other mappings are allowed for implementations which
-       cannot do this. Particulary the mapping given in NV_texture_shader or
-       the standard OpenGL byte/float mapping is considered acceptable too, as
-       might be a mapping which represents -1.0 by -128, 0.0 by 0 and 1.0 by
-       127 (that is, uses different scale factors for negative and positive
-       numbers).
-       Also, it is ok to store incoming GL_BYTE user data as-is, without
-       converting to GL_FLOAT (using the standard OpenGL float/byte mapping)
-       and converting back (using the mapping described here).
-       Other than those subtle issues there are no other non-standard
-       conversions used, so when using for instance CopyTexImage2D with
-       a framebuffer clamped to [0,1] all converted numbers will be in the range
-       [0, 127] (and not scaled and biased).
-
-
-    5) How will signed components resulting from RGBA8_SNORM texture
-       fetches interact with fragment coloring?
-
-       RESOLVED: Same as described in issue 6) of
-       ARB_texture_compression_rgtc (quote):
-       The specification language for this extension is silent
-       about clamping behavior leaving this to the core specification
-       and other extensions.  The clamping or lack of clamping is left
-       to the core specification and other extensions.
-
-       For assembly program extensions supporting texture fetches
-       (ARB_fragment_program, NV_fragment_program, NV_vertex_program3,
-       etc.) or the OpenGL Shading Language, these signed formats will
-       appear as expected with unclamped signed components as a result
-       of a texture fetch instruction.
-
-       If ARB_color_buffer_float is supported, its clamping controls
-       will apply.
-
-       NV_texture_shader extension, if supported, adds support for
-       fixed-point textures with signed components and relaxed the
-       fixed-function texture environment clamping appropriately.  If the
-       NV_texture_shader extension is supported, its specified behavior
-       for the texture environment applies where intermediate values
-       are clamped to [-1,1] unless stated otherwise as in the case
-       of explicitly clamped to [0,1] for GL_COMBINE.  or clamping the
-       linear interpolation weight to [0,1] for GL_DECAL and GL_BLEND.
-
-       Otherwise, the conventional core texture environment clamps
-       incoming, intermediate, and output color components to [0,1].
-
-       This implies that the conventional texture environment
-       functionality of unextended OpenGL 1.5 or OpenGL 2.0 without
-       using GLSL (and with none of the extensions referred to above)
-       is unable to make proper use of the signed texture formats added
-       by this extension because the conventional texture environment
-       requires texture source colors to be clamped to [0,1].  Texture
-       filtering of these signed formats would be still signed, but
-       negative values generated post-filtering would be clamped to
-       zero by the core texture environment functionality.  The
-       expectation is clearly that this extension would be co-implemented
-       with one of the previously referred to extensions or used with
-       GLSL for the new signed formats to be useful.
-
-
-    6) Should the RGBA_SNORM tokens also be accepted by CopyTexImage
-       functions?
-
-       RESOLVED: YES.
-
-
-    7) What to do with GetTexParameter if ARB_texture_float is supported,
-       in particular what datatype should this return for TEXTURE_RED_TYPE_ARB,
-       TEXTURE_GREEN_TYPE_ARB, TEXTURE_BLUE_TYPE_ARB, TEXTURE_ALPHA_TYPE_ARB?
-
-       RESOLVED: ARB_texture_float states type is either NONE,
-       UNSIGNED_NORMALIZED_ARB, or FLOAT. This extension adds a new enum,
-       SIGNED_NORMALIZED, which will be returned accordingly. This is the
-       same behaviour as in OpenGL 3.1.
-
-
-New Tokens
-
-
-    Accepted by the <internalformat> parameter of
-    TexImage1D, TexImage2D, TexImage3D, CopyTexImage1D, and CopyTexImage2D:
-
-        RGBA_SNORM                                0x8F93
-        RGBA8_SNORM                               0x8F97
-
-    Returned by the <params> parameter of GetTexLevelParameter:
-
-        SIGNED_NORMALIZED                         0x8F9C
-
-
-Additions to Chapter 3 of the OpenGL 2.0 Specification (Rasterization):
-
- -- Section 3.8.1, Texture Image Specification
-
-    Add to Table 3.16 (page 154): Sized internal formats
-
-    Sized             Base             R    G    B    A    L    I    D
-    Internal Format   Internal Format bits bits bits bits bits bits bits
-    ---------------   --------------- ---- ---- ---- ---- ---- ---- ----
-    RGBA8_SNORM       RGBA             8    8    8    8    0    0    0
-
-
-Dependencies on ARB_texture_float extension:
-
-    If ARB_texture_float is supported, GetTexParameter queries with <value>
-    of TEXTURE_RED_TYPE_ARB, TEXTURE_GREEN_TYPE_ARB, TEXTURE_BLUE_TYPE_ARB or
-    TEXTURE_ALPHA_TYPE_ARB return SIGNED_NORMALIZED if
-    the base internal format is RGBA_SNORM.

docs/MiniGLX.html

@@ -0,0 +1,534 @@
+<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
+<html>
+<head>
+  <title>Mini GLX Specification</title>
+</head>
+<body>
+<h1>
+<center>Mini GLX Specification</center>
+</h1>
+<h2>
+<center>Tungsten Graphics, Inc.<br>
+<br>
+January 20, 2003<br>
+<br>
+</center>
+</h2>
+<p> Copyright &copy; 2002-2003 by Tungsten Graphics, Inc., Cedar Park,
+Texas. All Rights Reserved. <br>
+<br>
+Permission is granted to make and distribute verbatim copies of this
+document provided the copyright notice and this permission notice are
+preserved on all copies.<br>
+<br>
+</p>
+<h1>1. Introduction</h1>
+<p>The Mini GLX interface facilitates OpenGL rendering on embedded
+devices. The interface is a subset of the GLX interface, plus a minimal
+set of Xlib-like functions.</p>
+<p>Programs written to the Mini GLX specification should run unchanged
+on systems with the X Window System and the GLX extension. The intention
+is to allow flexibility for prototyping and testing.</p>
+<p>This document serves as both the reference guide and programming
+guide for Mini GLX.<br>
+<br>
+</p>
+<h1>2. Mini GLX Concepts</h1>
+<p>The OpenGL specification does not describe how OpenGL rendering
+contexts and drawing surfaces (i.e. the frame buffer) are created and
+managed. Rather, this is handled by an OpenGL window system interface,
+such as Mini GLX.</p>
+<p>There are three main datatypes or resources managed by Mini GLX. The
+resources and their corresponding GLX or Xlib data types are:</p>
+<table cellspacing="10" align="center">
+  <tbody>
+    <tr>
+      <td><u>Resource</u></td>
+      <td><u>Data type</u></td>
+    </tr>
+    <tr>
+      <td>pixel formats</td>
+      <td>X Visual and XVisualInfo</td>
+    </tr>
+    <tr>
+      <td>drawing surfaces</td>
+      <td>X Window or GLXDrawable</td>
+    </tr>
+    <tr>
+      <td>rendering contexts</td>
+      <td>GLXContext</td>
+    </tr>
+  </tbody>
+</table>
+<p>Pixel formats or X Visuals describe the per-pixel attributes of the
+frame buffer.  For example, bits per color component, Z buffer size,
+stencil size, TrueColor vs PseudoColor, etc.</p>
+<p>Drawing surfaces or X Windows typically describe a spatial
+allocation of the frame buffer (i.e. the position and size of a
+rectangular region of pixels).  Since MiniGLX doesn't really support a
+window system, the window is effectively the entire frame buffer.</p>
+<p>A rendering context represents the current OpenGL state such as
+current drawing color, line width, blending mode, texture parameters,
+etc. Several rendering contexts can be created but only one can be in
+use at any given time.</p>
+<p>The Mini GLX interface provides all the functions needed for
+choosing pixel formats, create drawing surfaces, creating rendering
+contexts and binding rendering contexts to drawing surfaces.<br>
+<br>
+</p>
+<h1>3. Using Mini GLX</h1>
+<p>To use the Mini GLX interface in your application, include the
+GL/miniglx.h header file at compile time:</p>
+<blockquote><code>	#include &lt;GL/miniglx.h&gt;<br>
+  </code></blockquote>
+<code></code>Applications should link with libGL.so (i.e. <code>gcc
+myprogram.o -lGL -o myprogram</code>). &nbsp;libGL.so implements the
+MiniGLX API functions and, in turn, loads a hardware-specific device
+driver (such as <code>radeon_dri.so</code>) at runtime. &nbsp;The
+environment variable <code>LIBGL_DRIVERS_PATH</code> should name the
+directory where these modules are located.<br>
+<br>
+The remainder of this section describes the MiniGLX API functions.<br>
+<br>
+<h2>3.1 Initialization</h2>
+<p>The XOpenDisplay function is used to initialize the graphics system:</p>
+<blockquote>
+  <pre>Display *XOpenDisplay(const char *displayname)<br></pre>
+</blockquote>
+<p>The <code>displayName</code> parameter is currently ignored in Mini
+GLX. It is recommended that <code>NULL</code> be passed as the<code>displayName</code>
+parameter.</p>
+<p>If XOpenDisplay is able to initialize the graphics system a pointer
+to a Display will be returned.  Otherwise, NULL will be returned.</p>
+<h2>3.2 Choosing a Visual</h2>
+<p>A visual (i.e. pixel format) must be chosen before a drawing surface
+or rendering context can be created.  This is done with the
+glXChooseVisual function:</p>
+<blockquote>
+  <pre>XVisualInfo *glXChooseVisual(Display *dpy, int screen, const int *attribList)<br></pre>
+</blockquote>
+<p><code>dpy</code> is a pointer to the display returned by
+XOpenDisplay. </p>
+<p><code>screen</code> is currently ignored by Mini GLX and should be
+zero. </p>
+<p><code>attribList</code> is a list of GLX attributes which describe
+the desired pixel format.  It is terminated by the token <code>None</code>.
+The attributes are as follows:</p>
+<blockquote>
+  <dl>
+    <dt><code>GLX_USE_GL</code></dt>
+    <dd>This attribute should always be present in order to maintain
+compatibility with GLX.</dd>
+    <dt><code>GLX_RGBA</code></dt>
+    <dd>If present, only RGBA pixel formats will be considered.
+Otherwise, only color index formats are considered.</dd>
+    <dt><code>GLX_DOUBLEBUFFER</code></dt>
+    <dd>if present, only double-buffered pixel formats will	be chosen.</dd>
+    <dt><code>GLX_RED_SIZE n</code></dt>
+    <dd>Must be followed by a non-negative integer indicating the
+minimum number of bits per red pixel component that is acceptable.</dd>
+    <dt><code>GLX_GREEN_SIZE n</code></dt>
+    <dd>Must be followed by a non-negative integer indicating the
+minimum number of bits per green pixel component that is acceptable.</dd>
+    <dt><code>GLX_BLUE_SIZE n</code></dt>
+    <dd>Must be followed by a non-negative integer indicating the
+minimum number of bits per blue pixel component that is acceptable.</dd>
+    <dt><code>GLX_ALPHA_SIZE n</code></dt>
+    <dd>Must be followed by a non-negative integer indicating the
+minimum number of bits per alpha pixel component that is acceptable.</dd>
+    <dt><code>GLX_STENCIL_SIZE n</code></dt>
+    <dd>Must be followed by a non-negative integer indicating the
+minimum number of bits per stencil value that is acceptable.</dd>
+    <dt><code>None</code></dt>
+    <dd>This token is used to terminate the attribute list.</dd>
+  </dl>
+</blockquote>
+<p>glXChooseVisual will return a pointer to an XVisualInfo object which
+most closely matches the requirements of the attribute list.  If there
+is no visual which matches the request, NULL will be returned.</p>
+<p>Note that visuals with accumulation buffers and depth buffers are
+not available.<br>
+<br>
+</p>
+<h2>3.3 Creating a Drawing Surface</h2>
+<p>Drawing surfaces are created as X windows. &nbsp;For Mini GLX,
+windows are <i>full-screen</i>; they cover the entire frame buffer.
+&nbsp;Also, Mini GLX imposes a limit of one window.  A second window
+cannot be created until the first one is destroyed.</p>
+<h3>3.3.1 Window Creation</h3>
+<p>The XCreateWindow function is used to create a drawing surface:</p>
+<blockquote>
+  <pre>Window XCreateWindow( Display *display,<br>                      Window parent,<br>                      int x, int y,<br>                      unsigned int width, unsigned int height,<br>                      unsigned int borderWidth,<br>                      int depth,<br>                      unsigned int class,<br>                      Visual *visual,<br>                      unsigned long valuemask,<br>                      XSetWindowAttributes *attributes )<br></pre>
+</blockquote>
+<p>The parameters are as follows:</p>
+<blockquote>
+  <dl>
+    <dt><code>display</code></dt>
+    <dd>A Display pointer, as returned by XOpenDisplay.</dd>
+    <dt><code>parent</code></dt>
+    <dd>The parent window for the new window.  For Mini GLX, this
+should be<code>RootWindow(dpy, 0)</code>.</dd>
+    <dt><code>x, y</code></dt>
+    <dd>The position of the window.  For Mini GLX, both values should
+be zero.</dd>
+    <dt><code>width, height</code></dt>
+    <dd>The size of the window.  For Mini GLX, this specifies the
+desired screen size such as 1024, 768 or 1280, 1024.</dd>
+    <dt><code>borderWidth</code></dt>
+    <dd>This parameter should be zero.</dd>
+    <dt><code>depth</code></dt>
+    <dd>The pixel depth for the window.  For Mini GLX this should be
+the depth found in the XVisualInfo object returned by <code>glxChooseVisual</code>.</dd>
+    <dt><code>class</code></dt>
+    <dd>The window class.  For Mini GLX this value should be <code>InputOutput</code>.</dd>
+    <dt><code>visual</code></dt>
+    <dd>This parameter should be the <code>visual</code> field of the <code>XVisualInfo</code>
+object returned by <code>glxChooseVisual</code>.</dd>
+    <dt><code>valuemask</code></dt>
+    <dd>This parameter indicates which fields of the <code>XSetWindowAttributes</code>
+are to be used. For Mini GLX this is typically the bitmask<code>CWBackPixel
+| CWBorderPixel | CWColormap</code>.</dd>
+    <dt><code>attributes</code></dt>
+    <dd>Initial window attributes. Of the fields in the <code>XSetWindowAttributes</code>
+structure, the<code>background_pixel</code>, <code>border_pixel</code>
+and <code>colormap</code> fields should be set. &nbsp;See the discussion
+below regarding colormaps.</dd>
+  </dl>
+</blockquote>
+<p><code>XCreateWindow</code> will return a window handle if it succeeds
+or zero if it fails.</p>
+<h3>3.3.2 Window Mapping</h3>
+<p>To display the window the XMapWindow function must be called:</p>
+<blockquote>
+  <pre>void XMapWindow(Display *dpy, Window w)</pre>
+</blockquote>
+<p>This function does nothing in Mini GLX but is required for Xlib/GLX
+compatibility</p>
+<h3>3.3.3 Colormaps<br>
+</h3>
+<p>Xlib requires specification of a colormap when creating a window.
+&nbsp;For purposes of interoperability, Mini GLX requires this as well,
+though the colormap is not actually used. &nbsp;The XCreateColormap
+function is used to create a colormap:</p>
+<blockquote><code>Colormap XCreateColormap(Display *dpy, Window window,
+Visual *visual, int alloc)</code><br>
+  <code></code></blockquote>
+<p>The parameters are as follows:<br>
+</p>
+<blockquote>
+  <dl>
+    <dt><code>dpy</code></dt>
+    <dd>The display handle as returned by XOpenDisplay.</dd>
+    <dt><code>window</code></dt>
+    <dd> This parameter is ignored by Mini GLX but should be the value
+returned by the <code>RootWindow(dpy, 0)</code> macro.<br>
+    </dd>
+    <dt><code>visual</code></dt>
+    <dd>This parameter is ignored by Mini GLX but should be the visual
+field of the XVisualInfo object returned by glXChooseVisual. </dd>
+    <dt><code>alloc</code></dt>
+    <dd>This parameter is ignored by Mini GLX but should be set to <code>AllocNone</code>.</dd>
+  </dl>
+</blockquote>
+<br>
+<h2>3.4 Creating a Rendering Context</h2>
+<p>An OpenGL rendering context is created with the <code>glXCreateContext</code>
+function:</p>
+<blockquote>
+  <pre>GLXContext glXCreateContext(Display *dpy, XVisualInfo *visInfo, GLXContext shareList, Bool direct)<br></pre>
+</blockquote>
+<p>The parameters are as follows:</p>
+<blockquote>
+  <dl>
+    <dt><code>dpy</code></dt>
+    <dd>The display handle as returned by XOpenDisplay.</dd>
+    <dt><code>visInfo</code></dt>
+    <dd>The visual as returned by glXChooseVisual.</dd>
+    <dt><code>shareList</code></dt>
+    <dd>If non-zero, texture objects and display lists are shared with
+the named rendering context. If zero, texture objects and display lists
+will (initially) be private to this context. They may be shared when a
+subsequent context is created.</dd>
+    <dt><code>direct</code></dt>
+    <dd>Specifies whether direct or indirect rendering is desired. For
+Mini GLX this value is ignored but it should be set to <code>True</code>.</dd>
+  </dl>
+</blockquote>
+<p><code>glXCreateContext</code> will return a GLXContext handle if it
+succeeds or zero if it fails due to invalid parameter or insufficient
+resources.<br>
+<br>
+</p>
+<h2>3.5 Binding a Rendering Context</h2>
+<p>The final step before beginning OpenGL rendering is to bind (i.e.
+activate) a rendering context and drawing surface with the
+glXMakeCurrent function:</p>
+<blockquote>
+  <pre>Bool glXMakeCurrent(Display *dpy, GLXDrawable drawable, GLXContext ctx)<br></pre>
+</blockquote>
+<p>The parameters are as follows:</p>
+<blockquote>
+  <dl>
+    <dt><code>dpy</code></dt>
+    <dd>The display handle, as returned by XOpenDisplay.</dd>
+    <dt><code>drawable</code></dt>
+    <dd>The window or drawable to bind to the rendering context. This
+should be the value returned by XCreateWindow.</dd>
+    <dt><code>ctx</code></dt>
+    <dd>The rendering context to bind, as returned by glXCreateContext.</dd>
+  </dl>
+</blockquote>
+<p>If glXMakeCurrent succeeds True is returned.  Otherwise False is
+returned to indicate an invalid display, window or context parameter.</p>
+<p>After the rendering context has been bound to the drawing surface
+OpenGL rendering can begin.</p>
+<p>The current rendering context may be unbound by calling
+glXMakeCurrent with the window and context parameters set to zero.</p>
+<p>An application may create any number of rendering contexts and bind
+them as needed. Note that binding a rendering context is generally not a
+light-weight operation. &nbsp;Most simple OpenGL applications create
+only one rendering context.<br>
+<br>
+</p>
+<h2>3.6 Color Buffer Swapping</h2>
+<p>A double buffered window has two color buffers: a front buffer and a
+back buffer.  Normally, rendering is directed to the back buffer while
+the front buffer is displayed.  When rendering of a frame is finished
+the front and back buffers are swapped to provide the illusion of
+instanteous screen updates.</p>
+<p>The color buffers for a particular window (i.e. drawable) may be
+swapped with the glXSwapBuffers command:</p>
+<blockquote>
+  <pre>void glXSwapBuffers(Display *dpy, GLXDrawable drawable)<br></pre>
+</blockquote>
+Any pending rendering commands will be completed before the buffer swap
+takes place.<br>
+<br>
+Calling glXSwapBuffers on a window which is single-buffered has no
+effect.<br>
+<br>
+<h2>3.7 Releasing Resources</h2>
+<h3>3.7.1 Releasing Rendering Contexts</h3>
+<p>A rendering context may be destroyed by calling glXDestroyContext:</p>
+<blockquote>
+  <pre>void glXDestroyContext(Display *dpy, GLXContext ctx)<br></pre>
+</blockquote>
+<h3>3.7.2 Releasing Windows</h3>
+<p>A window may be destroyed by calling XDestroyWindow:</p>
+<blockquote>
+  <pre>void XDestroyWindow(Display *dpy, Window window)<br></pre>
+</blockquote>
+<h3>3.7.3 Releasing Visuals</h3>
+<p>An XVisualInfo object may be freed by calling XFree:</p>
+<blockquote>
+  <pre>void XFree(void *data)<br></pre>
+</blockquote>
+<h3>3.7.4 Releasing Colormaps</h3>
+<p>A colormap may be freed by calling XFreeColormap:</p>
+<blockquote>
+  <pre>void XFreeColormap(Display *dpy, Colormap colormap)<br></pre>
+</blockquote>
+<h3>3.7.4 Releasing Display Resources</h3>
+<p>When the application is about to exit, the resources associated with
+the graphics system can be released by calling XCloseDisplay:</p>
+<blockquote>
+  <pre>void XCloseDisplay(Display *dpy)<br></pre>
+</blockquote>
+<p>The display handle becomes invalid at this point.<br>
+<br>
+</p>
+<h2>3.8 Query Functions</h2>
+<h3>3.8.1 Querying Available Visuals</h3>
+A list of all available visuals can be obtained with the XGetVisualInfo
+function:<br>
+<br>
+<div style="margin-left: 40px;"><code>XVisualInfo
+*XGetVisualInfo(Display *dpy, long vinfo_mask, XVisualInfo
+*vinfo_template, int *nitems_return)<br>
+</code></div>
+<br>
+The parameters are as follows:<br>
+<blockquote>
+  <dl>
+    <dt><code>dpy</code></dt>
+    <dd>The display handle, as returned by XOpenDisplay.</dd>
+    <dt><code>vinfo_mask</code></dt>
+    <dd>A bitmask indicating which fields of the vinfo_template are to
+be matched. &nbsp;The value must be VisualScreenMask.</dd>
+    <dt><code>vinfo_template</code></dt>
+    <dd>A template whose fields indicate which visual attributes must
+be matched by the results. &nbsp;The screen field of this structure must
+be zero.</dd>
+    <dt><code>nitems_return</code></dt>
+    <dd>Returns the number of visuals returned. </dd>
+  </dl>
+</blockquote>
+The return value is the address of an array of all available visuals.<br>
+<br>
+An example of using XGetVisualInfo to get all available visuals follows:<br>
+<br>
+<div style="margin-left: 40px;"><code>XVisualInfo visTemplate, *results;</code><br>
+<code>int numVisuals;</code><br>
+<code>Display *dpy = XOpenDisplay(NULL);</code><br>
+<code>visTemplate.screen = 0;</code><br>
+<code>results = XGetVisualInfo(dpy, VisualScreenMask, &amp;visTemplate,
+&amp;numVisuals);</code><br>
+<code></code></div>
+<br>
+<h3>3.8.2 Querying Visual Attributes</h3>
+<p>The GLX attributes of an X visual may be queried with the
+glXGetConfig function:</p>
+<blockquote>
+  <pre>int glXGetConfig(Display *dpy, XVisualInfo *vis, int attribute, int *value)<br></pre>
+</blockquote>
+<p>The parameters are as follows:</p>
+<blockquote>
+  <dl>
+    <dt><code>dpy</code></dt>
+    <dd>The display handle, as returned by XOpenDisplay.</dd>
+    <dt><code>vis</code></dt>
+    <dd>The visual, as returned by glXChooseVisual.</dd>
+    <dt><code>attribute</code></dt>
+    <dd>The attribute to query.  The attributes are listed below.</dd>
+    <dt><code>value</code></dt>
+    <dd>Pointer to an integer in which the result of the query will be
+stored. </dd>
+  </dl>
+</blockquote>
+<p>The return value will be zero if no error occurs.<code>
+&nbsp;GLX_INVALID_ATTRIBUTE</code> will be returned if the attribute
+parameter is invalid.<code> &nbsp;GLX_BAD_VISUAL</code> will be returned
+if the XVisualInfo parameter is invalid.</p>
+<p>The following attributes may be queried:</p>
+<blockquote>
+  <dl>
+    <dt><code>GLX_USE_GL</code></dt>
+    <dd>The result will be <code>True</code> or <code>False</code> to
+indicate if OpenGL rendering is supported with the visual.  Mini GLX
+always return <code>True</code>.</dd>
+    <dt><code>GLX_RGBA</code></dt>
+    <dd>The result will be <code>True</code> for RGBA visuals or <code>False</code>
+for color index visuals.</dd>
+    <dt><code>GLX_DOUBLEBUFFER</code></dt>
+    <dd>The result will be <code>True</code> if the visual has two
+color buffers or <code>False</code> if the visual has one color buffer.</dd>
+    <dt><code>GLX_RED_SIZE</code></dt>
+    <dd>The result will be the number of red bits per pixel.</dd>
+    <dt><code>GLX_GREEN_SIZE</code></dt>
+    <dd>The result will be the number of green bits per pixel.</dd>
+    <dt><code>GLX_BLUE_SIZE</code></dt>
+    <dd>The result will be the number of blue bits per pixel.</dd>
+    <dt><code>GLX_ALPHA_SIZE</code></dt>
+    <dd>The result will be the number of alpha bits per pixel.</dd>
+    <dt><code>GLX_DEPTH_SIZE</code></dt>
+    <dd>The result will be the number of bits per Z value.</dd>
+    <dt><code>GLX_STENCIL_SIZE</code></dt>
+    <dd>The result will be the number of bits per stencil value.<br>
+      <br>
+    </dd>
+  </dl>
+</blockquote>
+<h3>3.8.3 Querying the Current Rendering Context</h3>
+<p>The current rendering context can be queried with
+glXGetCurrentContext: </p>
+<blockquote>
+  <pre>GLXContext glXGetCurrentContext(void)<br></pre>
+</blockquote>
+<p>Zero will be returned if no context is currently bound.<br>
+<br>
+</p>
+<h3>3.8.4 Querying the Current Drawable</h3>
+<p>The current drawable (i.e. window or drawing surface) can be queried
+with glXGetCurrentDrawable:</p>
+<blockquote>
+  <pre>GLXDrawable glXGetCurrentDrawable(void)<br></pre>
+</blockquote>
+<p>Zero will be returned if no drawable is currently bound.<br>
+<br>
+</p>
+<h3>3.8.5 Function Address Queries</h3>
+<p>The glXGetProcAddress function will return the address of any
+available OpenGL or Mini GLX function:</p>
+<blockquote>
+  <pre>void *glXGetProcAddress(const GLubyte *procName)<br></pre>
+</blockquote>
+<p>If <code>procName</code> is a valid function name, a pointer to that
+function will be returned. &nbsp;Otherwise, NULL will be returned.</p>
+<p>The purpose of glXGetProcAddress is to facilitate using future
+extensions to OpenGL or Mini GLX.  If a future version of the library
+adds new extension functions they'll be accessible via
+glXGetProcAddress. The alternative is to hard-code calls to the new
+functions in the application but doing so will prevent linking the
+application with older versions of the library.<br>
+<br>
+</p>
+<h2>3.9 Versioning</h2>
+The Mini GLX version can be queried at run time with glXQueryVersion:
+<blockquote>
+  <pre>Bool glXQueryVersion(Display *dpy, int *major, int *minor)<br></pre>
+</blockquote>
+<p><code>major</code> will be set to the major version number and<code>minor</code>
+will be set to the minor version number.<code>True</code> will be
+returned if the function succeeds. <code>False</code> will be returned
+if the function fails due to invalid parameters. The <code>dpy</code>
+argument is currently ignored, but should be the value returned by
+XOpenDisplay.</p>
+<p>At compile time, the Mini GLX interface version can be tested with
+the MINI_GLX_VERSION_1_<i>x</i> preprocessor tokens. For example, if
+version 1.0 of Mini GLX is supported, then<code> MINI_GLX_VERSION_1_0</code>
+will be defined. If version 1.1 of Mini GLX is supported, then<code>
+MINI_GLX_VERSION_1_1</code> will be defined.</p>
+<p>At the time of writing the current Mini GLX version is 1.0.<br>
+<br>
+</p>
+<h1>4.0 Interoperability with GLX and Xlib</h1>
+While Mini GLX strives to be compatible with GLX and Xlib there are
+some unavoidable differences which must be taken into consideration.<br>
+<h2>4.1 Public vs Private Structures</h2>
+The structure of many X data types is public. &nbsp;For example, the <code>Display</code>
+data type is defined as a structure in /usr/include/X11/Xlib.h and
+programmers may access any fields of that structure at will. &nbsp;Mini
+GLX also defines a Display data type but its fields are hidden and not
+visiblein <code>miniglx.h</code>. &nbsp;Duplicating the Xlib
+declaration for the <code>Display</code> data type in minigl.h would
+require defining a large number of other superfluous Xlib datatypes.<br>
+<br>
+Mini GLX users are discouraged from directly accessing the fields of
+Xlib data types to maximize portability - though this is unavoidable to
+some extent. &nbsp;For example, the <code>XVisualInfo</code> and <code>XSetWindowAtttributes</code>
+data types must be completely public.
+<h2>4.2 Macros</h2>
+In some cases, Xlib defines macros which are meant to be used instead
+of direct structure accesses. &nbsp;For example, the <code>RootWindow(dpy,
+screen)</code> macro returns the root window for a given screen on a
+given display. &nbsp;Unfortunately, macros do nothing to aid in ABI
+compatibility since they are resolved at compile time instead of at
+link/run time.<br>
+<br>
+Mini GLX also defines a <code>RootWindow</code> macro since it's
+essential for creating windows. &nbsp;But the implementation of this
+macro by Xlib and Mini GLX is completely different.<br>
+<h2>4.3 Summary</h2>
+Because Xlib and Mini GLX define data types and macros differently,
+Mini GLX applications must be recompiled when retargeting Mini GLX or
+native Xlib/GLX. &nbsp;That is, applications can't simply be re-linked
+because of ABI incompatibilities.<br>
+<br>
+Nevertheless, the fact that Mini GLX programs can be recompiled for
+Xlib and GLX increases portability and flexibility for testing and
+prototyping.<br>
+<br>
+<h1>5.0 Example Program</h1>
+<p>This section shows an example program which uses the Mini GLX
+interface. The program simply draws several frames of a rotating square.<br>
+</p>
+<p>The program may be compiled for use with Xlib/GLX or Mini GLX by
+setting the <code>USE_MINIGLX</code> token to 0 or 1, respectively.
+&nbsp;Note that the only difference is the header files which are
+included.<br>
+</p>
+<p> </p>
+<pre><code><br></code>#define USE_MINIGLX 1  /* 1 = use Mini GLX, 0 = use Xlib/GLX */<br><br>#include &lt;stdio.h&gt;<br>#include &lt;stdlib.h&gt;<br>#include &lt;GL/gl.h&gt;<br><br>#if USE_MINIGLX<br>#include &lt;GL/miniglx.h&gt;<br>#else<br>#include &lt;GL/glx.h&gt;<br>#include &lt;X11/Xlib.h&gt;<br>#endif<br><br><code>/*<br> * Create a simple double-buffered RGBA window.<br> */<br>static Window<br>MakeWindow(Display * dpy, unsigned int width, unsigned int height)<br>{<br>   int visAttributes[] = {<br>      GLX_RGBA,<br>      GLX_RED_SIZE, 1,<br>      GLX_GREEN_SIZE, 1,<br>      GLX_BLUE_SIZE, 1,<br>      GLX_DOUBLEBUFFER,<br>      None<br>   };<br>   XSetWindowAttributes attr;<br>   unsigned long attrMask;<br>   Window root;<br>   Window win;<br>   GLXContext ctx;<br>   XVisualInfo *visinfo;<br><br>   root = RootWindow(dpy, 0);<br><br>   /* Choose GLX visual / pixel format */<br>   visinfo = glXChooseVisual(dpy, 0, visAttributes);<br>   if (!visinfo) {<br>      printf("Error: couldn't get an RGB, Double-buffered visual\n");<br>      exit(1);<br>   }<br><br>   /* Create the window */<br>   attr.background_pixel = 0;<br>   attr.border_pixel = 0;<br>   attr.colormap = XCreateColormap(dpy, root, visinfo-&gt;visual, AllocNone);<br>   attrMask = CWBackPixel | CWBorderPixel | CWColormap;<br>   win = XCreateWindow(dpy, root, 0, 0, width, height,<br>		       0, visinfo-&gt;depth, InputOutput,<br>		       visinfo-&gt;visual, attrMask, &amp;attr);<br>   if (!win) {<br>      printf("Error: XCreateWindow failed\n");<br>      exit(1);<br>   }<br><br>   /* Display the window */<br>   XMapWindow(dpy, win);<br><br>   /* Create GLX rendering context */<br>   ctx = glXCreateContext(dpy, visinfo, NULL, True);<br>   if (!ctx) {<br>      printf("Error: glXCreateContext failed\n");<br>      exit(1);<br>   }<br><br>   /* Bind the rendering context and window */<br>   glXMakeCurrent(dpy, win, ctx);<br><br>   return win;<br>}<br><br><br>/*<br> * Draw a few frames of a rotating square.<br> */<br>static void<br>DrawFrames(Display * dpy, Window win)<br>{<br>   int angle;<br>   glShadeModel(GL_FLAT);<br>   glClearColor(0.5, 0.5, 0.5, 1.0);<br>   for (angle = 0; angle &lt; 360; angle += 10) {<br>      glClear(GL_COLOR_BUFFER_BIT);<br>      glColor3f(1.0, 1.0, 0.0);<br>      glPushMatrix();<br>      glRotatef(angle, 0, 0, 1);<br>      glRectf(-0.8, -0.8, 0.8, 0.8);<br>      glPopMatrix();<br>      glXSwapBuffers(dpy, win);<br>   }<br>}<br><br><br>int<br>main(int argc, char *argv[])<br>{<br>   Display *dpy;<br>   Window win;<br><br>   dpy = XOpenDisplay(NULL);<br>   if (!dpy) {<br>      printf("Error: XOpenDisplay failed\n");<br>      return 1;<br>   }<br><br>   win = MakeWindow(dpy, 300, 300);<br><br>   DrawFrames(dpy, win);<br><br>   return 0;<br>}<br></code></pre>
+<br>
+</body>
+</html>

docs/README.3DFX

@@ -644,7 +644,7 @@ Hints and Special Features:
 
 	- The Voodoo driver supports the GL_EXT_paletted_texture. it works
 	  only with GL_COLOR_INDEX8_EXT, GL_RGBA palettes and the alpha value
-	  is ignored because this is a limitation of the current Glide
+	  is ignored because this is a limitation of the the current Glide
 	  version and of the Voodoo hardware. See Mesa-3.1/3Dfx/demos/paltex.c for
 	  a demo of this extension.
 

docs/README.D3D

@@ -0,0 +1,124 @@
+
+                     DirectX 6 Driver for Mesa 3.0
+
+
+This software is distributed under the terms of the GNU Library
+General Public License, see the LICENSE file for details.
+
+
+
+What do you need ?
+------------------
+
+	- A PC with a DirectX 6 video driver installed.
+
+	- Mesa 3.0
+
+	- The 3Dfx Glide library 2.3 or later for your OS (the 2.4 works fine).
+	  The Voodoo2 requires the Glide library 2.51. The Glide 3.0 is not
+	  compatible with the Glide 2.x so it doesn't work with the current
+	  version of the driver;
+
+	- Visual C++ 5.0 is only compiler test but others should be ok with
+       changes to the makefiles (CFLAGS/LFLAGS).
+
+	- DirectX 6 SDK (was a MS download but not sure if still available).
+
+	- SoftIce or another debugger that will get DPF's is nice.
+
+
+Tested on:
+----------
+	Windows 95
+  	Windows 98
+	Windows NT 5.0 (beta 2)
+
+
+What is able to do ?
+--------------------
+
+	- the driver will try and use DirectX to rasterize the OpenGL primitives
+	that are sent to the driver.  The driver will fall back to SW  if the rendering 
+	context is too big.  The fallback to SW still uses DirectDraw.  If the driver
+	fails to support and operation (accum, stencil, etc) then it will try and get
+	Mesa to render it in SW.  DirectX 6 features that are unsupported by the 
+	installed DirectX 6 driver will be mapped to some other best fit feature.
+
+
+How to compile:
+---------------
+
+	These instructions assume you have Visual C++ installed.
+
+	  You might need to increase you enviroment space.  You can do this by 
+	adding the following statement to you config.sys.
+
+	shell=C:\COMMAND.COM C:\ /p /e:8198
+
+	  Next setup you compiler enviroment by running vcvars32.bat in the Visual C++
+ 	'bin' directoy.
+
+	c:\DevStudio\VC\bin\vcvars32.bat
+
+	  Modify the D3D makefile to point at your SDK install.  Example has the SDK
+	installed on my 'f' drive in the root.
+
+	file: \Mesa-3.0\src\makefile.d3d
+
+	SDKROOT=f:\mssdk
+
+	  Now you can simply make the project.  If you look in the makefile you can see
+	I have some different targets like 'install'.  
+
+	nmake /f makefile.d3d
+
+
+FAQ:
+----
+
+	1) I don't think the driver is using my DirectX driver.
+
+ 	  This maybe true as the current version will only select the Primary D3D driver
+	installed.  If you 3D card is the secondary (3dfx) then your out of luck for this
+	release.
+
+	2) The driver seems like its not HW accelerated.
+
+	  If you have a video card with limited memory then you might want to try and 
+	change your destop resolution to a low setting (640x480x16) so that the 3D part
+	of the card has more resources.  Remeber the driver can't make the card better...
+
+	3) Nothing works.
+
+	  Make sure you have a DirectX '6' driver installed.  Check you driver docs for this
+	info or use the SDK info utilities.
+	  The final 'dll' is named opengl32.dll and is either in the same directory as the 
+	OpenGL program or in your system directory (x:\windows\system or x:\winnt\system32).
+	  Check your destop resolution.  Most DirectX 6 drivers will only support 16bit and
+	32bit color depth.  To find out for sure you can check the DirectX Info Viewer in
+	the SDK.
+	  
+
+	4) Rendering doesn't look right.
+
+	  Sometimes this is because the card doesn't support a feature that that is required.
+	This is usually due to unsupported alpha functions (test/blend) or texture mapping.
+	Some cards suffer from too small of an alpha channel.  The driver does its best to
+	fallback on unsupported features.  This is not to say the driver may not have a bug(s).
+
+	5) Textures look bad.
+
+	  No mipmapping in this release.
+
+
+Thanks to:
+----------
+
+Brian Paul
+
+
+
+
+Leigh McRae (leigh@altsoftware.com)
+February 9, 1999
+

docs/README.WIN32

@@ -27,6 +27,12 @@ using the SDK with Visual Studio Express can be found at
 
 http://msdn.microsoft.com/vstudio/express/visualc/usingpsdk/
 
+If you are stuck using VC6 or VC7, you may start with these project
+files, but you may need to modify them to reflect changes in the
+Mesa source code tree.  If you sucessfully update the project files,
+please submit them to the author of this document so that they may
+be included in the next distribution. 
+
 The project files to build the core Mesa library, Windows Mesa
 drivers, OSMesa, and GLU are in the mesa directory.  The project files
 to build GLUT and some demo programs are in the progs directory.
@@ -100,6 +106,23 @@ should build all the demos.
 Build System Notes
 ----- ------ -----
 
+VC6 (not actively supported)
+---
+
+Visual Studio 6 does not recognize files with the .cc extension as C++
+language files, without a lot of unnatural tweaking.  So, the VC6
+build process uses custom build steps to compile these files in the
+GLU library.
+
+Two additional configurations are provided, Debug x86 and Release x86
+that activate the shader code compilation by defining SLANG_86.  It is
+unknown if and how this works.
+
+VC7 (not actively supported)
+---
+
+The above-mentioned .cc problem does not exist in this version.
+
 VC8
 ---
 

docs/README.directfb

@@ -0,0 +1,28 @@
+                         
+                         Mesa DirectFB Information
+
+
+Requirements
+============
+
+  To build Mesa with DirectFB (DirectFBGL) support you need:
+     - DirectFB at least 1.0.0 (http://directfb.org)
+     - pkg-config at least 0.9 (http://pkgconfig.sf.net)
+
+
+Installation
+============
+  Run
+     
+     make linux-directfb
+
+  to build Mesa and DirectFBGL module,
+
+     make install
+
+  to install OpenGL libraries and
+
+     make linux-directfb-install
+
+  to install DirectFBGL module in the proper location.
+

docs/cell.html

@@ -12,18 +12,31 @@
 The Mesa
 <a href="http://en.wikipedia.org/wiki/Cell_%28microprocessor%29" target="_parent">Cell</a>
 driver is part of the 
-<a href="http://wiki.freedesktop.org/wiki/Software/gallium" target="_parent">Gallium3D</a>
+<a href="http://www.tungstengraphics.com/wiki/index.php/Gallium3D" target="_parent">Gallium3D</a>
 architecture.
-Tungsten Graphics did the original implementation of the Cell driver.
+</p>
+
+<p>
+<a href="http://www.tungstengraphics.com/" target="_parent">Tungsten Graphics</a>
+is leading the project.
+Two phases are planned.
+First, to implement the framework for parallel rasterization using the Cell
+SPEs, including texture mapping.
+Second, to implement a full-featured OpenGL driver with support for GLSL, etc.
+The second phase is now underway.
 </p>
 
 
 <H2>Source Code</H2>
 
 <p>
-The latest Cell driver source code is on the master branch of the Mesa
-git repository.
+The latest Cell driver source code is on the <code>gallium-0.2</code> branch
+of the Mesa git repository.
+After you've cloned the repository, check out the branch with:
 </p>
+<pre>
+   git-checkout -b gallium-0.2 origin/gallium-0.2
+</pre>
 <p>
 To build the driver you'll need the IBM Cell SDK (version 2.1 or 3.0).
 To use the driver you'll need a Cell system, such as a PS3 running Linux,
@@ -37,21 +50,19 @@ special changes.
 
 <p>
 To compile the code, run <code>make linux-cell</code>.
-Or to build in debug mode, run <code>make linux-cell-debug</code>.
+To build in debug mode, run <code>make linux-cell-debug</code>.
 </p>
 
 <p>
-To use the library, make sure your current directory is the top of the
-Mesa tree, then set <code>LD_LIBRARY_PATH</code> like this:
-<pre>
-  export LD_LIBRARY_PATH=$PWD/lib/gallium:$PWD/lib/
-</pre>
+To use the library, make sure <code>LD_LIBRARY_PATH</code> points the Mesa/lib/
+directory that contains <code>libGL.so</code>.
+</p>
 
 <p>
-Verify that the Cell driver is being used by running
-<code>progs/xdemos/glxinfo</code> and looking for:
+Verify that the Cell driver is being used by running <code>glxinfo</code>
+and looking for:
 <pre>
-  OpenGL renderer string: Gallium 0.3, Cell on Xlib
+  OpenGL renderer string: Gallium 0.2, Cell on Xlib
 </pre>
 
 

docs/contents.html

@@ -39,6 +39,7 @@ a:visited {
 <ul>
 <li><a href="download.html" target="MainFrame">Downloading / Unpacking</a>
 <li><a href="install.html" target="MainFrame">Compiling / Installing</a>
+<li><a href="glu.html" target="MainFrame">SGI's GLU</a>
 <li><a href="precompiled.html" target="MainFrame">Precompiled Libraries</a>
 </ul>
 
@@ -52,12 +53,9 @@ a:visited {
 
 <b>User Topics</b>
 <ul>
-<li><a href="shading.html" target="MainFrame">Shading Language</a>
-<li><a href="egl.html" target="MainFrame">EGL</a>
-<li><a href="opengles.html" target="MainFrame">OpenGL ES</a>
-<li><a href="openvg.html" target="MainFrame">OpenVG / Vega</a>
 <LI><A HREF="envvars.html" target="MainFrame">Environment Variables</A>
 <LI><A HREF="osmesa.html" target="MainFrame">Off-Screen Rendering</A>
+<LI><A HREF="pbuffers.html" target="MainFrame">Pbuffer Rendering</A>
 <LI><A HREF="debugging.html" target="MainFrame">Debugging Tips</A>
 <LI><A HREF="perf.html" target="MainFrame">Performance Tips</A>
 <LI><A HREF="extensions.html" target="MainFrame">Mesa Extensions</A>
@@ -68,9 +66,8 @@ a:visited {
 <ul>
 <li><a href="http://sourceforge.net/projects/mesa3d" target="_parent">SourceForge homepage</a>
 <li><a href="repository.html" target="MainFrame">Source Code Repository</a>
-<li><a href="sourcetree.html" target="MainFrame">Source Code Tree</a>
 <li><a href="memory.html" target="MainFrame">DRI Memory Management</a>
-<li><a href="glu.html" target="MainFrame">SGI's GLU</a>
+<li><a href="shading.html" target="MainFrame">Shading Language</a>
 <li><a href="utilities.html" target="MainFrame">Utilities</a>
 <li><a href="helpwanted.html" target="MainFrame">Help Wanted</a>
 <li><a href="devinfo.html" target="MainFrame">Development Notes</a>
@@ -92,6 +89,7 @@ a:visited {
 <li><a href="modelers.html" target="MainFrame">Modeling and Rendering</a>
 <li><a href="science.html" target="MainFrame">Science and Technical</a>
 <li><a href="utility.html" target="MainFrame">Utilities</a>
+<li><a href="demos.html" target="MainFrame">Demos / other</a>
 </ul>
 
 <b>Hosted by:</b>

docs/demos.html

@@ -0,0 +1,18 @@
+<HTML>
+
+<TITLE>Demos</TITLE>
+
+<link rel="stylesheet" type="text/css" href="mesa.css"></head>
+
+<BODY>
+
+<H1>Demos</H1>
+
+
+<ul>
+<li><a href="http://www.geocities.com/shobhand/homepage.html">Shobhan Dutta's Geartrain and Walkthrough Demos</a>
+</li></ul>
+
+
+</body>
+</html>

docs/devinfo.html

@@ -107,7 +107,7 @@ Global variables are not allowed.
 Function name examples:
 </p>
 <pre>
-	glFooBar()       - a public GL entry point (in glapi_dispatch.c)
+	glFooBar()       - a public GL entry point (in dispatch.c)
 	_mesa_FooBar()   - the internal immediate mode function
 	save_FooBar()    - retained mode (display list) function in dlist.c
 	foo_bar()        - a static (private) function
@@ -123,46 +123,48 @@ These are the instructions for making a new Mesa release.
 
 <H3>Get latest source files</H3>
 <p>
-Use git to get the latest Mesa files from the git repository, from whatever
-branch is relevant.
+Use "cvs update -dAP " to get the latest Mesa files from CVS.
 </p>
 
 
 <H3>Verify and update version info</H3>
 <p>
-Create/edit the docs/relnotes-x.y.html file to document what's new in the release.
-Add the new relnotes-x.y.html file to <a href="relnotes.html">relnotes.html</a>.
+Create/edit the docs/RELNOTES-X.Y file to document what's new in the release.
+Add the new RELNOTES-X.Y file to <a href="relnotes.html">relnotes.html</a>.
+Update the docs/VERSIONS file too.
 </p>
 
 <p>
-Update the MESA_MAJOR, MESA_MINOR and MESA_TINY version numbers in
+Edit the MESA_MAJOR, MESA_MINOR and MESA_TINY version numbers in
 configs/default.
-Also update the VERSION line in the top-level Makefile.
 </p>
 
 <p>
 Make sure the values in src/mesa/main/version.h are correct.
 </p>
 
+<p>
+Edit the top-level Makefile and verify that DIRECTORY, LIB_NAME and
+DEMO_NAME are correct.
+</p>
+
 <p>
 Update the docs/news.html file and docs/download.html files.
 </p>
 
 <p>
-Check in all updates to git.
+Check in all updates to CVS.
 </p>
 
 <p>
-Tag the files with the release name (in the form <b>mesa_X_Y</b>)
-with: <code>git tag -a mesa_X_Y</code>
-Then: <code>git push origin mesa_X_Y</code>
+Tag the CVS files with the release name (in the form <b>mesa_X_Y</b>).
 </p>
 
 
 <H3>Make the tarballs</H3>
 <p>
 Make a symbolic link from $(DIRECTORY) to 'Mesa'.  For example,
-<code>ln -s Mesa Mesa-7.5</code>
+ln -s Mesa Mesa-6.3
 This is needed in order to make a correct tar file in the next step.
 </p>
 
@@ -175,7 +177,7 @@ Make the distribution files.  From inside the Mesa directory:
 <p>
 After the tarballs are created, the md5 checksums for the files will
 be computed.
-Add them to the docs/relnotes-X.Y.html file.
+Add them to the docs/news.html file.
 </p>
 
 <p>
@@ -189,21 +191,9 @@ Follow the directions on SourceForge for creating a new "release" and
 uploading the tarballs.
 </p>
 
-<p>
-Basically, to upload the tarball files with:
-<br>
-<code>
-rsync -avP ssh Mesa*-X.Y.* USERNAME@frs.sourceforge.net:uploads/
-</code>
-</p>
-
 <p>
 Update the web site by copying the docs/ directory's files to 
-/home/users/b/br/brianp/mesa-www/htdocs/ with:
-<br>
-<code>
-sftp USERNAME,mesa3d@web.sourceforge.net
-</code>
+/home/users/b/br/brianp/mesa-www/htdocs/
 </p>
 
 <p>

docs/dispatch.html

@@ -198,8 +198,8 @@ few preprocessor defines.</p>
 <ul>
 <li>If <tt>GLX_USE_TLS</tt> is defined, method #4 is used.</li>
 <li>If <tt>PTHREADS</tt> is defined, method #3 is used.</li>
-<li>If any of <tt>PTHREADS</tt>,
-<tt>WIN32_THREADS</tt>, or <tt>BEOS_THREADS</tt>
+<li>If any of <tt>PTHREADS</tt>, <tt>USE_XTHREADS</tt>,
+<tt>SOLARIS_THREADS</tt>, <tt>WIN32_THREADS</tt>, or <tt>BEOS_THREADS</tt>
 is defined, method #2 is used.</li>
 <li>If none of the preceeding are defined, method #1 is used.</li>
 </ul>
@@ -244,8 +244,8 @@ isn't a significant problem.</p>
 system.  There are two steps to this.  The file must first be added to
 <tt>src/mesa/sources</tt>.  That gets the file built and linked.  The second
 step is to add the correct <tt>#ifdef</tt> magic to
-<tt>src/mesa/glapi/glapi_dispatch.c</tt> to prevent the C version of the
-dispatch functions from being built.</p>
+<tt>src/mesa/main/dispatch.c</tt> to prevent the C version of the dispatch
+functions from being built.</p>
 
 <A NAME="fixedsize"/>
 <H3>3.4. Fixed-Length Dispatch Stubs</H3>

docs/download.html

@@ -9,14 +9,20 @@
 <H1>Downloading</H1>
 
 <p>
-Primary Mesa download site:
-<a href="ftp://ftp.freedesktop.org/pub/mesa/"
-target="_parent">freedesktop.org</a> (FTP)
+Current stable release: <b>7.4</b>
+<br>
+Last unstable/development release: <b>7.3</b>
 </p>
 
 <p>
-When a new release is coming, release candidates (betas) may be found
-<a href="ftp://ftp.freedesktop.org/pub/mesa/beta/" target="_parent">here</a>.
+Primary download site:
+<a href="http://sourceforge.net/project/showfiles.php?group_id=3"
+target="_parent">SourceForge</a>
+</p>
+
+<p>
+When a new release is coming, release candidates (betas) can be found
+<a href="http://www.mesa3d.org/beta/">here</a>.
 </p>
 
 

docs/egl.html

@@ -1,324 +0,0 @@
-<html>
-
-<title>Mesa EGL</title>
-
-<head><link rel="stylesheet" type="text/css" href="mesa.css"></head>
-
-<body>
-
-<h1>Mesa EGL</h1>
-
-<p>The current version of EGL in Mesa implements EGL 1.4.  More information
-about EGL can be found at
-<a href="http://www.khronos.org/egl/" target="_parent">
-http://www.khronos.org/egl/</a>.</p>
-
-<p>The Mesa's implementation of EGL uses a driver architecture.  The main
-library (<code>libEGL</code>) is window system neutral.  It provides the EGL
-API entry points and helper functions for use by the drivers.  Drivers are
-dynamically loaded by the main library and most of the EGL API calls are
-directly dispatched to the drivers.</p>
-
-<p>The driver in use decides the window system to support.  For drivers that
-support hardware rendering, there are usually multiple drivers supporting the
-same window system.  Each one of of them supports a certain range of graphics
-cards.</p>
-
-<h2>Build EGL</h2>
-
-<ol>
-<li>
-<p>Run <code>configure</code> with the desired state trackers and enable
-the Gallium driver for your hardware.  For example</p>
-
-<pre>
-  $ ./configure --with-state-trackers=egl,es,vega --enable-gallium-{swrast,intel}
-</pre>
-
-<p>The main library will be enabled by default.  The <code>egl</code> state
-tracker is needed by a number of EGL drivers.  EGL drivers will be covered
-later.  The <a href="opengles.html">es state tracker</a> provides OpenGL ES 1.x
-and 2.x and the <a href="openvg.html">vega state tracker</a> provides OpenVG
-1.x.</p>
-</li>
-
-<li>Build and install Mesa as usual.</li>
-</ol>
-
-<p>In the given example, it will build and install <code>libEGL</code>,
-<code>libGLESv1_CM</code>, <code>libGLESv2</code>, <code>libOpenVG</code>, and
-one or more EGL drivers.</p>
-
-<h3>Configure Options</h3>
-
-<p>There are several options that control the build of EGL at configuration
-time</p>
-
-<ul>
-<li><code>--enable-egl</code>
-
-<p>By default, EGL is enabled.  When disabled, the main library and the drivers
-will not be built.</p>
-
-</li>
-
-<li><code>--with-egl-driver-dir</code>
-
-<p>The directory EGL drivers should be installed to.  If not specified, EGL
-drivers will be installed to <code>${libdir}/egl</code>.</p>
-
-</li>
-
-<li><code>--with-egl-displays</code>
-
-<p>List the window system(s) to support.  It is by default <code>x11</code>,
-which supports the X Window System.  Its argument is a comma separated string
-like, for example, <code>--with-egl-displays=x11,kms</code>.  Because an EGL
-driver decides which window system to support, this example will enable two
-(sets of) EGL drivers.  One supports the X window system and the other supports
-bare KMS (kernel modesetting).</p>
-
-</li>
-
-<li><code>--with-state-trackers</code>
-
-<p>The argument is a comma separated string.  It is usually used to specify the
-rendering APIs, like OpenGL ES or OpenVG, to build.  But it should be noted
-that a number of EGL drivers depend on the <code>egl</code> state tracker.
-They will <em>not</em> be built without the <code>egl</code> state tracker.</p>
-
-</li>
-
-<li><code>--enable-gallium-swrast</code>
-
-<p>This option is not specific to EGL.  But if there is no driver for your
-hardware, or you are experiencing problems with the hardware driver, you can
-enable the swrast DRM driver.  It is a dummy driver and EGL will fallback to
-software rendering automatically.</p>
-
-</li>
-</ul>
-
-<h3>OpenGL</h3>
-
-<p>The OpenGL state tracker is not built in the above example.  It should be
-noted that the classic <code>libGL</code> is not a state tracker and cannot be
-used with EGL (unless the EGL driver in use is <code>egl_glx</code>).  To build
-the OpenGL state tracker, one may append <code>glx</code> to
-<code>--with-state-trackers</code> and manually build
-<code>src/gallium/winsys/xlib/</code>.</p>
-
-<h2>Use EGL</h2>
-
-<p> The demos for OpenGL ES and OpenVG can be found in <code>progs/es1/</code>,
-<code>progs/es2/</code> and <code>progs/openvg/</code>.  You can use them to
-test your build.  For example,</p>
-
-<pre>
-  $ cd progs/es1/xegl
-  $ make
-  $ ./torus
-</pre>
-
-<h3>Environment Variables</h3>
-
-<p>There are several environment variables that control the behavior of EGL at
-runtime</p>
-
-<ul>
-<li><code>EGL_DRIVERS_PATH</code>
-
-<p>By default, the main library will look for drivers in the directory where
-the drivers are installed to.  This variable specifies a list of
-colon-separated directories where the main library will look for drivers, in
-addition to the default directory.  This variable is ignored for setuid/setgid
-binaries.</p>
-
-</li>
-
-<li><code>EGL_DRIVER</code>
-
-<p>This variable specifies a full path to an EGL driver and it forces the
-specified EGL driver to be loaded.  It comes in handy when one wants to test a
-specific driver.  This variable is ignored for setuid/setgid binaries.</p>
-
-</li>
-
-<li><code>EGL_DISPLAY</code>
-
-<p>When <code>EGL_DRIVER</code> is not set, the main library loads <em>all</em>
-EGL drivers that support a certain window system.  <code>EGL_DISPLAY</code> can
-be used to specify the window system and the valid values are, for example,
-<code>x11</code> or <code>kms</code>.  When the variable is not set, the main
-library defaults the value to the first window system listed in
-<code>--with-egl-displays</code> at configuration time.
-
-</li>
-
-<li><code>EGL_LOG_LEVEL</code>
-
-<p>This changes the log level of the main library and the drivers.  The valid
-values are: <code>debug</code>, <code>info</code>, <code>warning</code>, and
-<code>fatal</code>.</p>
-
-</li>
-
-<li><code>EGL_SOFTWARE</code>
-
-<p>For drivers that support both hardware and software rendering, setting this
-variable to true forces the use of software rendering.</p>
-
-</li>
-</ul>
-
-<h2>EGL Drivers</h2>
-
-<p>There are two categories of EGL drivers: Gallium and classic.</p>
-
-<p>Gallium EGL drivers supports all rendering APIs specified in EGL 1.4.  The
-support for optional EGL functions and EGL extensions is usually more complete
-than the classic ones.  These drivers depend on the <code>egl</code> state
-tracker to build.  The available drivers are</p>
-
-<ul>
-<li><code>egl_&lt;dpy&gt;_i915</code></li>
-<li><code>egl_&lt;dpy&gt;_i965</code></li>
-<li><code>egl_&lt;dpy&gt;_radeon</code></li>
-<li><code>egl_&lt;dpy&gt;_nouveau</code></li>
-<li><code>egl_&lt;dpy&gt;_swrast</code></li>
-<li><code>egl_&lt;dpy&gt;_vmwgfx</code></li>
-</ul>
-
-<p><code>&lt;dpy&gt;</code> is given by <code>--with-egl-displays</code> at
-configuration time.  There will be one EGL driver for each combination of the
-displays listed and the hardware drivers enabled.</p>
-
-<p>Classic EGL drivers, on the other hand, supports only OpenGL as its
-rendering API.  They can be found under <code>src/egl/drivers/</code>.  There
-are 3 of them</p>
-
-<ul>
-<li><code>egl_glx</code>
-
-<p>This driver provides a wrapper to GLX.  It uses exclusively GLX to implement
-the EGL API.  It supports both direct and indirect rendering when the GLX does.
-It is accelerated when the GLX is.  As such, it cannot provide functions that
-is not available in GLX or GLX extensions.</p>
-</li>
-
-<li><code>egl_dri2</code>
-
-<p>This driver supports the X Window System as its window system.  It functions
-as a DRI2 driver loader.  Unlike <code>egl_glx</code>, it has no dependency on
-<code>libGL</code>.  It talks to the X server directly using DRI2 protocol.</p>
-
-</li>
-<li><code>egl_dri</code>
-
-<p>This driver lacks maintenance and does <em>not</em> build.  It is similiar
-to <code>egl_dri2</code> in that it functions as a DRI(1) driver loader.  But
-unlike <code>egl_dri2</code>, it supports Linux framebuffer devices as its
-window system and supports EGL_MESA_screen_surface extension.  As DRI1 drivers
-are phasing out, it might eventually be replaced by <code>egl_dri2</code>.</p>
-
-</li>
-</ul>
-
-<p>To use the classic drivers, one must manually set <code>EGL_DRIVER</code> at
-runtime.</p>
-
-<h2>Developers</h2>
-
-<p>The sources of the main library and the classic drivers can be found at
-<code>src/egl/</code>.  The sources of the <code>egl</code> state tracker can
-be found at <code>src/gallium/state_trackers/egl/</code>.</p>
-
-<p>The suggested way to learn to write a EGL driver is to see how other drivers
-are written.  <code>egl_glx</code> should be a good reference.  It works in any
-environment that has GLX support, and it is simpler than most drivers.</p>
-
-<h3>Lifetime of Display Resources</h3>
-
-<p>Contexts and surfaces are examples of display resources.  They might live
-longer than the display that creates them.</p>
-
-<p>In EGL, when a display is terminated through <code>eglTerminate</code>, all
-display resources should be destroyed.  Similarly, when a thread is released
-throught <code>eglReleaseThread</code>, all current display resources should be
-released.  Another way to destory or release resources is through functions
-such as <code>eglDestroySurface</code> or <code>eglMakeCurrent</code>.</p>
-
-<p>When a resource that is current to some thread is destroyed, the resource
-should not be destroyed immediately.  EGL requires the resource to live until
-it is no longer current.  A driver usually calls
-<code>eglIs&lt;Resource&gt;Bound</code> to check if a resource is bound
-(current) to any thread in the destroy callbacks.  If it is still bound, the
-resource is not destroyed.</p>
-
-<p>The main library will mark destroyed current resources as unlinked.  In a
-driver's <code>MakeCurrent</code> callback,
-<code>eglIs&lt;Resource&gt;Linked</code> can then be called to check if a newly
-released resource is linked to a display.  If it is not, the last reference to
-the resource is removed and the driver should destroy the resource.  But it
-should be careful here because <code>MakeCurrent</code> might be called with an
-uninitialized display.</p>
-
-<p>This is the only mechanism provided by the main library to help manage the
-resources.  The drivers are responsible to the correct behavior as defined by
-EGL.</p>
-
-<h3><code>EGL_RENDER_BUFFER</code></h3>
-
-<p>In EGL, the color buffer a context should try to render to is decided by the
-binding surface.  It should try to render to the front buffer if the binding
-surface has <code>EGL_RENDER_BUFFER</code> set to
-<code>EGL_SINGLE_BUFFER</code>;  If the same context is later bound to a
-surface with <code>EGL_RENDER_BUFFER</code> set to
-<code>EGL_BACK_BUFFER</code>, the context should try to render to the back
-buffer.  However, the context is allowed to make the final decision as to which
-color buffer it wants to or is able to render to.</p>
-
-<p>For pbuffer surfaces, the render buffer is always
-<code>EGL_BACK_BUFFER</code>.  And for pixmap surfaces, the render buffer is
-always <code>EGL_SINGLE_BUFFER</code>.  Unlike window surfaces, EGL spec
-requires their <code>EGL_RENDER_BUFFER</code> values to be honored.  As a
-result, a driver should never set <code>EGL_PIXMAP_BIT</code> or
-<code>EGL_PBUFFER_BIT</code> bits of a config if the contexts created with the
-config won't be able to honor the <code>EGL_RENDER_BUFFER</code> of pixmap or
-pbuffer surfaces.</p>
-
-<p>It should also be noted that pixmap and pbuffer surfaces are assumed to be
-single-buffered, in that <code>eglSwapBuffers</code> has no effect on them.  It
-is desirable that a driver allocates a private color buffer for each pbuffer
-surface created.  If the window system the driver supports has native pbuffers,
-or if the native pixmaps have more than one color buffers, the driver should
-carefully attach the native color buffers to the EGL surfaces, re-route them if
-required.</p>
-
-<p>There is no defined behavior as to, for example, how
-<code>glDrawBuffer</code> interacts with <code>EGL_RENDER_BUFFER</code>.  Right
-now, it is desired that the draw buffer in a client API be fixed for pixmap and
-pbuffer surfaces.  Therefore, the driver is responsible to guarantee that the
-client API renders to the specified render buffer for pixmap and pbuffer
-surfaces.</p>
-
-<h3><code>EGLDisplay</code> Mutex</h3>
-
-The <code>EGLDisplay</code> will be locked before calling any of the dispatch
-functions (well, except for GetProcAddress which does not take an
-<code>EGLDisplay</code>).  This guarantees that the same dispatch function will
-not be called with the sample display at the same time.  If a driver has access
-to an <code>EGLDisplay</code> without going through the EGL APIs, the driver
-should as well lock the display before using it.
-
-<h3>TODOs</h3>
-
-<ul>
-<li>Pass the conformance tests</li>
-<li>Better automatic driver selection: <code>EGL_DISPLAY</code> loads all
-drivers and might eat too much memory.</li>
-
-</ul>
-
-</body>
-</html>

docs/enums.txt

@@ -1,6 +1,4 @@
 
-See the OpenGL ARB enum registry at http://www.opengl.org/registry/api/enum.spec
-
 Blocks allocated to Mesa:
        0x8750-0x875F
        0x8BB0-0x8BBF
@@ -32,12 +30,12 @@ MESA_ycbcr_texture.spec:
 GL_MESA_pack_invert.spec
 	GL_PACK_INVERT_MESA              0x8758
 
-GL_MESA_shader_debug.spec: (obsolete)
+GL_MESA_shader_debug.spec:
         GL_DEBUG_OBJECT_MESA             0x8759
         GL_DEBUG_PRINT_MESA              0x875A
         GL_DEBUG_ASSERT_MESA             0x875B
 
-GL_MESA_program_debug.spec: (obsolete)
+GL_MESA_program_debug.spec:
 	GL_FRAGMENT_PROGRAM_CALLBACK_MESA      0x????
 	GL_VERTEX_PROGRAM_CALLBACK_MESA        0x????
 	GL_FRAGMENT_PROGRAM_POSITION_MESA      0x????
@@ -47,11 +45,3 @@ GL_MESA_program_debug.spec: (obsolete)
 	GL_VERTEX_PROGRAM_CALLBACK_FUNC_MESA   0x????
 	GL_VERTEX_PROGRAM_CALLBACK_DATA_MESA   0x????
 
-GL_MESAX_texture_stack:
-	GL_TEXTURE_1D_STACK_MESAX            0x8759
-	GL_TEXTURE_2D_STACK_MESAX            0x875A
-	GL_PROXY_TEXTURE_1D_STACK_MESAX      0x875B
-	GL_PROXY_TEXTURE_2D_STACK_MESAX      0x875C
-	GL_TEXTURE_1D_STACK_BINDING_MESAX    0x875D
-	GL_TEXTURE_2D_STACK_BINDING_MESAX    0x875E
-

docs/envvars.html

@@ -25,10 +25,6 @@ fragment programs (intended for developers only)
 <li>MESA_TNL_PROG - if set, implement conventional vertex transformation
 operations with vertex programs (intended for developers only).
 Setting this variable automatically sets the MESA_TEX_PROG variable as well.
-<li>MESA_EXTENSION_OVERRIDE - can be used to enable/disable extensions.
-A value such as "GL_EXT_foo -GL_EXT_bar" will enable the GL_EXT_foo extension
-and disable the GL_EXT_bar extension.
-<li>MESA_GLSL - <a href="shading.html#envvars">shading language options</a>
 </ul>
 
 <p>
@@ -51,28 +47,5 @@ See the <A HREF="xlibdriver.html">Xlib software driver page</A> for details.
 </ul>
 
 
-<p>
-These environment variables are for the Intel i945/i965 drivers:
-</p>
-<ul>
-<li>INTEL_STRICT_CONFORMANCE - if set to 1, enable sw fallbacks to improve
-    OpenGL conformance.  If set to 2, always use software rendering.
-<li>INTEL_NO_BLIT - if set, disable hardware-accelerated glBitmap,
-    glCopyPixels, glDrawPixels.
-</ul>
-
-
-<p>
-These environment variables are for the Radeon R300 driver:
-</p>
-<ul>
-<li>R300_NO_TCL - if set, disable hardware-accelerated Transform/Clip/Lighting.
-</ul>
-
-<p>
-Mesa EGL supports different sets of environment variables.  See the
-<a href="egl.html">Mesa EGL</a> page for the details.
-</p>
-
 </BODY>
 </HTML>

docs/extensions.html

@@ -24,7 +24,6 @@ The specifications follow.
 <LI><A HREF="MESA_resize_buffers.spec">MESA_resize_buffers.spec</A>
 <LI><A HREF="MESA_set_3dfx_mode.spec">MESA_set_3dfx_mode.spec</A>
 <LI><A HREF="MESA_sprite_point.spec">MESA_sprite_point.spec</A> (obsolete)
-<LI><A HREF="MESA_texture_signed_rgba.spec">MESA_texture_signed_rgba.spec</A>
 <LI><A HREF="MESA_trace.spec">MESA_trace.spec</A> (obsolete)
 <LI><A HREF="MESA_window_pos.spec">MESA_window_pos.spec</A>
 <LI><A HREF="MESA_ycbcr_texture.spec">MESA_ycbcr_texture.spec</A>

docs/faq.html

@@ -316,19 +316,6 @@ Basically, applying a translation of (0.375, 0.375, 0.0) to your coordinates
 will fix the problem.
 </p>
 
-<h2>3.6 How can I change the maximum framebuffer size in Mesa's
-<tt>swrast</tt> backend?</h2>
-<p>
-These can be overridden by using the <tt>--with-max-width</tt> and
-<tt>--with-max-height</tt> options.  The two need not be equal.
-</p><p>
-Do note that Mesa uses these values to size some internal buffers,
-so increasing these sizes will cause Mesa to require additional
-memory.  Furthermore, increasing these limits beyond <tt>4096</tt>
-may introduce rasterization artifacts; see the leading comments in
-<tt>src/mesa/swrast/s_tritemp.h</tt>.
-</p>
-
 <br>
 <br>
 

docs/install.html

@@ -21,7 +21,6 @@
   <li><a href="#pkg-config">Building OpenGL programs with pkg-config
   </ul>
 <li><a href="#windows">Windows</a>
-<li><a href="#scons">SCons</a>
 <li><a href="#other">Other</a>
 </ol>
 <br>
@@ -35,14 +34,14 @@
 <h3>1.1 Prerequisites for DRI and hardware acceleration</h3>
 
 <p>
-The following are required for DRI-based hardware acceleration with Mesa:
+The following are required for DRI-based hardware acceleration with Mesa 7.3:
 </p>
 
 <ul>
 <li><a href="http://xorg.freedesktop.org/releases/individual/proto/">dri2proto</a> version 1.99.3 or later
 <li>Linux 2.6.28
 <li><a href="http://dri.freedesktop.org/libdrm/" target="_parent">libDRM</a>
-version 2.4.15 or later
+version 2.4.3 or later
 <li>Xorg server version 1.5 or later
 </ul>
 </p>
@@ -329,51 +328,13 @@ For example, compiling and linking a GLUT application can be done with:
 <H2>2. Windows Compilation and Installation</H1>
 
 <p>
-Please see the <a href="#scons">instructions on building with SCons</a>.
-Alternatively see <a href="README.WIN32">README.WIN32</a> file.
+Please see the <a href="README.WIN32">README.WIN32</a> file.
 </p>
 
 
 
-<a name="scons">
-<H2>3. Building with SCons</H1>
-
-<p>
-To build Mesa with SCons on Linux or Windows do
-</p>
-<pre>
-    scons
-</pre>
-<p>
-The build output will be placed in
-build/<i>platform</i>-<i>machine</i>-<i>debug</i>/..., where <i>platform</i> is for
-example linux or windows, <i>machine</i> is x86 or x86_64, optionally followed
-by -debug for debug builds.
-</p>
-
-<p>
-To build Mesa with SCons for Windows on Linux using the MinGW crosscompiler toolchain do
-</p>
-<pre>
-    scons platform=windows toolchain=crossmingw machine=x86 statetrackers=mesa drivers=softpipe,trace winsys=gdi
-</pre>
-<p>
-This will create:
-</p>
-<ul>
-<li>build/windows-x86-debug/gallium/winsys/gdi/opengl32.dll &mdash; Mesa + Gallium + softpipe, binary compatible with Windows's opengl32.dll 
-<li>build/windows-x86-debug/glut/glx/glut32.dll
-<li>progs/build/windows-x86-debug/wgl/wglinfo.exe
-<li>progs/build/windows-x86-debug/trivial/tri.exe
-<li>and many other samples in progs/build/windows-x86-debug/...
-</ul>
-<p>
-Put them all in the same directory to test them.
-</p>
-
-
 <a name="other">
-<H2>4. Other systems</H1>
+<H2>3. Other systems</H1>
 
 <p>
 Documentation for other environments (some may be very out of date):

docs/libGL.txt

@@ -1,197 +0,0 @@
-
-
-
-Introduction
-------------
-
-This document describes the implementation of the XFree86 4.0 libGL.so
-library defined by the Linux/OpenGL Base specification found at
-http://reality.sgi.com/opengl/linux/linuxbase.html.
-
-The documentation is divided into two sections:
-    User's Guide
-    Driver Developer's Guide
-
-Author:  Brian Paul     (brian@precisioninsight.com)
-Date:    February 2000
-
-
-
-User's Guide
-------------
-
-Using libGL.so
-
-The libGL.so library defines the gl- and glX-prefixed functions needed to
-run OpenGL programs.  OpenGL client applications should link with the
--lGL option to use it.
-
-libGL.so serves two primary functions: GLX protocol generation for indirect
-rendering and loading/management of hardware drivers for direct rendering.
-
-When libGL.so initializes itself it uses the DRI to determine the
-appropriate hardware driver for each screen on the local X display.
-The hardware drivers are expected to be in the /usr/X11R6/lib/modules/dri/
-directory.  Drivers are named with the convention <name>_dri.so where
-<name> is a driver such as "tdfx", "i810", "gamma", etc.
-
-The LIBGL_DRIVERS_DIR environment variable may be used to specify a
-different DRI modules directory, overriding /usr/X11R6/lib/modules/dri/.
-This environment variable is ignored in setuid programs for security
-reasons.
-
-When libGL.so is unable to locate appropriate hardware drivers it will
-fall back to using indirect GLX rendering.
-
-To aid in solving problems, libGL.so will print diagnostic messages to
-stderr if the LIBGL_DEBUG environment variable is defined.
-
-libGL.so is thread safe.  The overhead of thread safety for common,
-single-thread clients is negligible.  However, the overhead of thread
-safety for multi-threaded clients is significant.  Each GL API call
-requires two calls to pthread_get_specific() which can noticably
-impact performance.  Warning:  libGL.so is thread safe but individual
-DRI drivers may not be.  Please consult the documentation for a driver
-to learn if it is thread safe.
-
-
-
-Indirect Rendering
-
-You can force indirect rendering mode by setting the LIBGL_ALWAYS_INDIRECT
-environment variable.  Hardware acceleration will not be used.
-
-
-
-libGL.so Extensibility
-
-libGL.so is designed to be extended without upgrading.  That is,
-drivers may install new OpenGL extension functions into libGL.so
-without requiring libGL.so to be replaced.  Clients of libGL.so should
-use the glXGetProcAddressEXT() function to obtain the address of
-functions by name.  For more details of GLX_ARB_get_proc_address see
-http://oss.sgi.com/projects/ogl-sample/registry/ARB/get_proc_address.spec
-
-libGL.so is also designed with flexibility such that it may be used
-with many generations of hardware drivers to come.
-
-
-
-
-Driver Developer's Guide
-------------------------
-
-This section describes the requirements to make an XFree86 4.0
-libGL.so-compatible hardware driver.  It is not intended for end
-users of libGL.so.
-
-
-XFree86 source files
-
-libGL.so is built inside XFree86 with sources found in xc/lib/GL/.
-Specifically, libGL.so is built from:
-
-	xc/lib/GL/glx/*.c
-	xc/lib/dri/XF86dri.c
-	xc/lib/dri/dri_glx.c
-	xc/lib/GL/mesa/src/glapi.c
-	xc/lib/GL/mesa/src/glapitemp.h
-	xc/lib/GL/mesa/src/glapitable.h
-	xc/lib/GL/mesa/src/glapioffsets.h
-	xc/lib/GL/mesa/src/glapinoop.c
-	xc/lib/GL/mesa/src/glheader.h
-	xc/lib/GL/mesa/src/glthread.c
-	xc/lib/GL/mesa/src/glthread.h
-	xc/lib/GL/mesa/src/X86/glapi_x86.S
-	xc/lib/GL/mesa/src/X86/assyntax.h
-
-Understand that the mesa/src/gl*.[ch] files are not tied to Mesa.  They
-have no dependencies on the rest of Mesa and are designed to be reusable
-in a number of projects.
-
-The glapi_x86.X and assyntax.h files implement x86-optimized dispatch
-of GL functions.  They are not required; C-based dispatch can be used
-instead, with a slight performance penalty.
-
-
-
-Driver loading and binding
-
-When libGL.so initializes itself (via the __glXInitialize function) a
-call is made to driCreateDisplay().  This function uses DRI facilities
-to determine the driver file appropriate for each screen on the local
-display.  Each screen's driver is then opened with dlopen() and asked
-for its __driCreateScreen() function.  The pointers to the __driCreateScreen()
-functions are kept in an array, indexed by screen number, in the
-__DRIdisplayRec struct.
-
-When a driver's __driCreateScreen() function is called, it must initialize
-a __DRIscreenRec struct.  This struct acts as the root of a tree of
-function pointers which are called to create and destroy contexts and
-drawables and perform all the operations needed by the GLX interface.
-See the xc/lib/GL/glx/glxclient.h file for details.
-
-
-
-Dynamic Extension Function Registration
-
-In order to provide forward compatibility with future drivers, libGL.so
-allows drivers to register new OpenGL extension functions which weren't
-known when libGL.so was built.
-
-The register_extensions() function in xc/lib/GL/dri/dri_glx.c is called
-as soon as libGL.so is loaded.  This is done with gcc's constructor
-attribute.  This mechanism will likely have to be changed for other compilers.
-
-register_extensions() loops over all local displays and screens, determines
-the DRI driver for each, and calls the driver's __driRegisterExtensions()
-function, if present.
-
-The __driRegisterExtensions() function can add new entrypoints to libGL
-by calling:
-
-    GLboolean _glapi_add_entrypoint(const char *funcName, GLuint offset)
-
-The parameters are the name of the function (such as "glFoobarEXT") and the
-offset of the dispatch slot in the API dispatch table.  The return value
-indicates success (GL_TRUE) or failure (GL_FALSE).
-
-_glapi_add_entrypoint() will synthesize entrypoint code in assembly
-language.  Assembly languages is required since parameter passing
-can't be handled correctly using a C-based solution.
-
-The address of the new entrypoint is obtained by calling the
-glXGetProcAddressARB() function.
-
-The dispatch offset number MUST be a number allocated by SGI in the same
-manner in which new GL_* constants are allocated.  Using an arbitrary
-offset number will result in many problems.
-
-
-
-Dispatch Management
-
-When a GL context is made current, the driver must install its dispatch
-table as the current dispatch table.  This is done by calling
-
-	void _glapi_set_dispatch(struct _glapi_table *dispatch);
-
-This will install the named dispatch table for the calling thread.
-The current dispatch table for a thread can be obtained by calling
-
-	struct _glapi_table *_glapi_get_dispatch(void);
-
-For higher performance in the common single-thread case, the global
-variable _glapi_Dispatch will point to the current dispatch table.
-This variable will be NULL when in multi-thread mode.
-
-
-
-Context Management
-
-libGL.so uses the XFree86 xthreads package to manage a thread-specific
-current context pointer.  See __glXGet/SetCurrentContext() in glext.c
-
-Drivers may use the _glapi_set/get_context() functions to maintain
-a private thread-specific context pointer.
-

docs/lists.html

@@ -13,41 +13,36 @@
 </p>
 
 <ul>
-<li><a href="http://lists.freedesktop.org/mailman/listinfo/mesa-users"
-target="_parent">mesa-users</a> - intended for end-users of Mesa and DRI
-drivers.  Newbie questions are OK, but please try the general OpenGL
+<li><a href="https://lists.sourceforge.net/lists/listinfo/mesa3d-announce"
+target="_parent">mesa3d-announce</a> - announcements of new Mesa
+versions are sent to this list.
+</li>
+<br>
+<li><a href="https://lists.sourceforge.net/lists/listinfo/mesa3d-users"
+target="_parent">mesa3d-users</a> - intended for users of the Mesa and DRI.
+Newbie questions are appropriate, but please try the general OpenGL
 resources and Mesa/DRI documentation first.
 </li>
 <br>
-<li><a href="http://lists.freedesktop.org/mailman/listinfo/mesa-dev"
-target="_parent">mesa-dev</a> - for Mesa, Gallium and DRI development
-discussion.  Not for beginners.
+<li><a href="https://lists.sourceforge.net/lists/listinfo/mesa3d-dev"
+target="_parent">mesa3d-dev</a> - for discussion of Mesa and Direct Rendering 
+Infrastructure development. Not for beginners.
 </li>
 <br>
 <li><a href="http://lists.freedesktop.org/mailman/listinfo/mesa-commit"
 target="_parent">mesa-commit</a> - relays git check-in messages
 (for developers).
-In general, people should not post to this list.
-</li>
 <br>
-<li><a href="http://lists.freedesktop.org/mailman/listinfo/mesa-announce"
-target="_parent">mesa-announce</a> - announcements of new Mesa
-versions are sent to this list.  Very low traffic.
+Note: the old mesa3d-cvs list is no longer in use.
 </li>
 </ul>
 
-<p>
-Follow the links above for list archives.
-</p>
-
 <p>For mailing lists about Direct Rendering Modules (drm) in Linux/BSD 
-kernels, see the
-<a href="http://dri.freedesktop.org/wiki/MailingLists" target="_parent">
-DRI wiki</a>.
-</p>
+kernels, see <a href="http://dri.freedesktop.org/wiki/MailingLists">wiki</a>.
 
 <p>
-<b>Notice</b>: You must subscribe to these lists in order to post to them.
+<b>Notice</b>: non-member posts to any of these lists will be automatically
+rejected.
 </p>
 
 

docs/news.html

@@ -11,94 +11,7 @@
 <H1>News</H1>
 
 
-<h2>April 5, 2010</h2>
-
-<p>
-<a href="relnotes-7.8.1.html">Mesa 7.8.1</a> is released.  This is a bug-fix
-release for a few critical issues in the 7.8 release.
-</p>
-
-
-<h2>March 28, 2010</h2>
-<p>
-<a href="relnotes-7.7.1.html">Mesa 7.7.1</a> is released.  This is a bug-fix
-release fixing issues found in the 7.7 release.
-</p>
-<p>
-Also, <a href="relnotes-7.8.html">Mesa 7.8</a> is released.  This is a new
-development release.
-</p>
-
-
-
-<h2>December 21, 2009</h2>
-<p>
-<a href="relnotes-7.6.1.html">Mesa 7.6.1</a> is released.  This is a bug-fix
-release fixing issues found in the 7.6 release.
-</p>
-<p>
-Also, <a href="relnotes-7.7.html">Mesa 7.7</a> is released.  This is a new
-development release.
-</p>
-
-
-<h2>September 28, 2009</h2>
-<p>
-<a href="relnotes-7.6.html">Mesa 7.6</a> is released.  This is a new feature
-release.  Those especially concerned about stability may want to wait for the
-follow-on 7.6.1 bug-fix release.
-</p>
-<p>
-<a href="relnotes-7.5.2.html">Mesa 7.5.2</a> is also released.
-This is a stable release fixing bugs since the 7.5.1 release.
-</p>
-
-
-<h2>September 3, 2009</h2>
-<p>
-<a href="relnotes-7.5.1.html">Mesa 7.5.1</a> is released.
-This is a bug-fix release which fixes bugs found in version 7.5.
-</p>
-
-
-<h2>July 17, 2009</h2>
-<p>
-<a href="relnotes-7.5.html">Mesa 7.5</a> is released.
-This is a new features release.  People especially concerned about
-stability may want to wait for the follow-on 7.5.1 bug-fix release.
-</p>
-
-
-<h2>June 23, 2009</h2>
-<p>
-<a href="relnotes-7.4.4.html">Mesa 7.4.4</a> is released.
-This is a stable release that fixes a regression in the i915/i965 drivers
-that slipped into the 7.4.3 release.
-</p>
-
-
-<h2>June 19, 2009</h2>
-<p>
-<a href="relnotes-7.4.3.html">Mesa 7.4.3</a> is released.
-This is a stable release fixing bugs since the 7.4.2 release.
-</p>
-
-
-<h2>May 15, 2009</h2>
-<p>
-<a href="relnotes-7.4.2.html">Mesa 7.4.2</a> is released.
-This is a stable release fixing bugs since the 7.4.1 release.
-</p>
-
-
-<h2>April 18, 2009</h2>
-<p>
-<a href="relnotes-7.4.1.html">Mesa 7.4.1</a> is released.
-This is a stable release fixing bugs since the 7.4 release.
-</p>
-
-
-<h2>March 27, 2009</h2>
+<h2>March ??, 2009</h2>
 <p>
 <a href="relnotes-7.4.html">Mesa 7.4</a> is released.
 This is a stable release fixing bugs since the 7.3 release.
@@ -157,7 +70,7 @@ Added a new page describing the <a href="cell.html">Mesa Cell driver</a>.
 <p>
 Gallium3D is the codename for the new Mesa device driver architecture
 which is currently under development.
-A <a href="http://wiki.freedesktop.org/wiki/Software/gallium"
+A <a href="http://www.tungstengraphics.com/wiki/index.php/Gallium3D"
 target="_parent"> summary</a> of the architecture can be found on the
 Tungsten Graphics website.
 </p>

docs/opengles.html

@@ -1,79 +0,0 @@
-<html>
-
-<title>OpenGL ES State Trackers</title>
-
-<head><link rel="stylesheet" type="text/css" href="mesa.css"></head>
-
-<body>
-
-<h1>OpenGL ES State Trackers</h1>
-
-<p>The current version of the OpenGL ES state trackers implement OpenGL ES 1.1 and OpenGL ES 2.0.
-More informations about OpenGL ES can be found at
-<a href="http://www.khronos.org/opengles/" target="_parent">
-http://www.khronos.org/opengles/</a>.</p>
-
-<p>The OpenGL ES state trackers depends on the Gallium architecture and a
-working EGL implementation.  Please refer to <a href="egl.html">Mesa EGL</a>
-for more information about EGL.</p>
-
-
-<h2>Build the Libraries</h2>
-<ol>
-<li>Run <code>configure</code> with <code>--with-state-trackers=egl,es</code> and enable the Gallium driver for your hardware.</li>
-<li>Build and install Mesa as usual.</li>
-</ol>
-
-<p>It will install libGLESv1_CM, libGLESv2, libEGL, and one or more EGL drivers for your hardware.</p>
-<h2>Run the Demos</h2>
-
-<p>There are some demos in <code>progs/es1/</code> and <code>progs/es2/</code>.  You can use them to test your build.  For example,</p>
-
-<pre>
-  $ cd progs/es1/xegl
-  $ make
-  $ ./torus
-</pre>
-
-<h2>Developers</h2>
-
-<p>The core of OpenGL ES state trackers is the ES overlay.  It is located in
-<code>src/mesa/es/</code>.</p>
-
-<h3>Structure</h3>
-
-<p>The ES overlay uses as much code as possible from Mesa.  It has its own glapi XMLs to describe the APIs of OpenGL ES.  The ES overlay can be built parallelly with Mesa, and they will give</p>
-
-<table border="1">
-	<tr><td>Library Name</td><td>Usage</td><td>Source</td></tr>
-	<tr><td>libmesagallium.a</td><td>OpenGL state tracker</td><td>Mesa</td></tr>
-	<tr><td>libes1gallium.a</td><td>OpenGL ES 1.x state tracker</td><td>ES overlay</td></tr>
-	<tr><td>libes2gallium.a</td><td>OpenGL ES 2.x state tracker</td><td>ES overlay</td></tr>
-	<tr><td>libglapi.a</td><td>OpenGL API</td><td>Mesa</td></tr>
-	<tr><td>libes1api.a</td><td>OpenGL ES 1.x API</td><td>ES overlay</td></tr>
-	<tr><td>libes2api.a</td><td>OpenGL ES 2.x API</td><td>ES overlay</td></tr>
-</table>
-
-<p>The OpenGL ES state trackers and APIs are then used by <code>src/gallium/state_trackers/es/</code> to create the final libraries.</p>
-
-<h3>Dispatch Table</h3>
-
-<p>The ES overlay uses an additional indirection when dispatching fucntions</p>
-
-<pre>
-  Mesa:       glFoo() --&gt; _mesa_Foo()
-  ES overlay: glFoo() --&gt; _es_Foo() --&gt; _mesa_Foo()
-</pre>
-
-<p>The indirection serves several purposes</p>
-
-<ul>
-<li>When a function is in Mesa and the type matches, it checks the arguments and calls the Mesa function.</li>
-<li>When a function is in Mesa but the type mismatches, it checks and converts the arguments before calling the Mesa function.</li>
-<li>When a function is not available in Mesa, or accepts arguments that are not available in OpenGL, it provides its own implementation.</li>
-</ul>
-
-<p>Other than the last case, the ES overlay uses <code>APIspec.xml</code> to generate functions to check and/or converts the arguments.</p>
-
-</body>
-</html>

docs/openvg.html

@@ -1,61 +0,0 @@
-<HTML>
-
-<TITLE>OpenVG State Tracker</TITLE>
-
-<head><link rel="stylesheet" type="text/css" href="mesa.css"></head>
-
-<BODY>
-
-<body bgcolor="#eeeeee">
-
-<H1>OpenVG State Tracker</H1>
-
-<p>
-The current version of the OpenVG state tracker implements OpenVG 1.0.
-</p>
-<p>
-More informations about OpenVG can be found at
-<a href="http://www.khronos.org/openvg/" target="_parent">
-http://www.khronos.org/openvg/</a> .
-</p>
-<p>
-The OpenVG state tracker depends on the Gallium architecture and a working EGL implementation.
-Please refer to <a href="egl.html">Mesa EGL</a> for more information about EGL.
-</p>
-
-
-<h2>Building the library</h2>
-<ol>
-<li>Build Mesa3D with Gallium3D. Any build that builds Gallium3D libraries, EGL, and Gallium EGL drivers will suffice</li>
-<li>cd src/gallium/state_trackers/vega; make</li>
-<li>The last step will build libOpenVG library. You can add the libdir to LD_LIBRARY_PATH or install libOpenVG</li>
-</ol>
-
-<h3>Sample build</h3>
-A sample build looks as follows:
-<pre>
-  $ ./configure --with-state-trackers=egl,vega --enable-gallium-intel
-  $ make
-  $ make install
-</pre>
-
-<h2>OpenVG Demos</h2>
-
-<p>
-To build the OpenVG demos:
-</p>
-<pre>
-  cd progs/openvg
-  make
-</pre>
-<p>
-To run a demo:
-</p>
-<pre>
-  cd openvg/demos
-  ./lion
-</pre>
-
-
-</body>
-</html>

docs/osmesa.html

@@ -26,7 +26,7 @@ more information about the API functions.
 </p>
 
 <p>
-There are several examples of OSMesa in the <code>progs/osdemos/</code>
+There are several examples of OSMesa in the <code>progs/osdemo/</code>
 directory.
 </p>
 

docs/pbuffers.html

@@ -0,0 +1,54 @@
+<HTML>
+
+<TITLE>PBuffer Rendering</TITLE>
+
+<link rel="stylesheet" type="text/css" href="mesa.css"></head>
+
+<BODY>
+
+<H1>PBuffer Rendering</H1>
+
+<p>
+Basically, FBconfigs and PBuffers allow you to do off-screen rendering
+with OpenGL.  The OSMesa interface does basically the same thing, but
+fbconfigs and pbuffers are supported by more vendors.
+PBuffer rendering may also be hardware accelerated.
+</p>
+
+<p>
+PBuffers are getting more use nowadays, though they've actually been
+around for a long time on IRIX systems and other workstations.
+</p>
+
+<p>
+The
+<a href="http://oss.sgi.com/projects/ogl-sample/registry/SGIX/fbconfig.txt"
+target="_parent">GL_SGIX_fbconfig</a>
+and
+<a href="http://oss.sgi.com/projects/ogl-sample/registry/SGIX/pbuffer.txt"
+target="_parent">
+GL_SGIX_pbuffer</a> extensions describe the functionality.
+More recently, these extensions have been promoted to ARB extensions (on
+Windows at least).
+</p>
+
+<p>
+The Mesa/progs/xdemos/ directory has some useful code for working
+with pbuffers:
+</p>
+
+<ul>
+<li><b>pbinfo.c</b> - like glxinfo, it prints a list of available
+    fbconfigs and whether each supports pbuffers.
+<li><b>pbutil.c</b> - a few utility functions for dealing with
+    fbconfigs and pbuffers.
+<li><b>pbdemo.c</b> - a demonstration of off-screen rendering with pbuffers.
+</ul>
+
+<p>
+Mesa 4.1 and later support GL_SGIX_fbconfig and GL_SGIX_pbuffer (software
+rendering only).
+</p>
+
+</BODY>
+</HTML>

docs/precompiled.html

@@ -9,11 +9,17 @@
 <H1>Precompiled Libraries</H1>
 
 <p>
-In general, precompiled Mesa libraries are not available.
+In general, precompiled libraries are not available.
+However, people occasionally prepare packages of precompiled libraries
+for some systems.
 </p>
+
+<H2>Mesa-6.0 for Solaris</H2>
+
 <p>
-However, some Linux distros (such as Ubuntu) seem to closely track
-Mesa and often have the latest Mesa release available as an update.
+Steve Christensen has submitted precompiled Mesa-6.0 libraries for
+Solaris at <a href="http://sunfreeware.com/" target="_parent">
+sunfreeware.com</a>.
 </p>
 
 </BODY>

docs/relnotes-7.4.1.html

@@ -1,79 +0,0 @@
-<HTML>
-
-<TITLE>Mesa Release Notes</TITLE>
-
-<head><link rel="stylesheet" type="text/css" href="mesa.css"></head>
-
-<BODY>
-
-<body bgcolor="#eeeeee">
-
-<H1>Mesa 7.4.1 Release Notes / 18 April 2009</H1>
-
-<p>
-Mesa 7.4.1 is a stable development release fixing bugs since the 7.4 release.
-</p>
-<p>
-Mesa 7.4.1 implements the OpenGL 2.1 API, but the version reported by
-glGetString(GL_VERSION) depends on the particular driver being used.
-Some drivers don't support all the features required in OpenGL 2.1.
-</p>
-<p>
-See the <a href="install.html">Compiling/Installing page</a> for prerequisites
-for DRI hardware acceleration.
-</p>
-
-
-<h2>MD5 checksums</h2>
-<pre>
-0c3a72f3295a53a134c04bd7d209ea62  MesaLib-7.4.1.tar.gz
-423260578b653818ba66c2fcbde6d7ad  MesaLib-7.4.1.tar.bz2
-84f78b154d4bd5c3ecc42eeff2e56676  MesaLib-7.4.1.zip
-aa0ad323e59d6d10ff33ac0dde462a60  MesaDemos-7.4.1.tar.gz
-1e169fb6abc2b45613f1c98a82dfe690  MesaDemos-7.4.1.tar.bz2
-294e42be2d74176596c994ec23322fcf  MesaDemos-7.4.1.zip
-92373bfa48e7b68dddf356e86b0e5699  MesaGLUT-7.4.1.tar.gz
-336f3824b578b072211e0beecf4f04f4  MesaGLUT-7.4.1.tar.bz2
-20751388d8ef16b42d25d9e3d705d101  MesaGLUT-7.4.1.zip
-</pre>
-
-
-<h2>Bug fixes</h2>
-<ul>
-<li>Fixed a two-sided lighting bug in fixed-function-to-GPU code generation
-<li>Fixed some Darwin issues (Jeremy Huddleston)
-<li>Indexing the GLSL gl_EyePlane[] or gl_ObjectPlane[] arrays with a variable
-    was broken, bug 20986
-<li>Fixed incorrect texture unit bias in TXB instruction
-<li>glTexParameter settings weren't always propogated to drivers
-<li>Assorted vertex/fragment program bug fixes
-<li>Fixed point rendering in software rasterizer
-<li>Fixed potential deadlock in object hash functions
-<li>Fix a couple bugs surrounding front-buffer rendering with DRI2, but this
-    is not quite complete.
-<li>Fixed glPopAttrib() bug when restoring user clip planes
-</ul>
-
-
-
-<h2>Driver Status</h2>
-
-<pre>
-Driver			Status
-----------------------	----------------------
-DRI drivers		varies with the driver
-XMesa/GLX (on Xlib)	implements OpenGL 2.1
-OSMesa (off-screen)	implements OpenGL 2.1
-Windows/Win32		implements OpenGL 2.1
-Glide (3dfx Voodoo1/2)	implements OpenGL 1.3
-SVGA			unsupported
-Wind River UGL		unsupported
-DJGPP			unsupported
-GGI			unsupported
-BeOS			unsupported
-Allegro			unsupported
-D3D			unsupported
-</pre>
-
-</body>
-</html>

docs/relnotes-7.4.2.html

@@ -1,74 +0,0 @@
-<HTML>
-
-<TITLE>Mesa Release Notes</TITLE>
-
-<head><link rel="stylesheet" type="text/css" href="mesa.css"></head>
-
-<BODY>
-
-<body bgcolor="#eeeeee">
-
-<H1>Mesa 7.4.2 Release Notes / May 15, 2009</H1>
-
-<p>
-Mesa 7.4.2 is a stable development release fixing bugs since the 7.4.1 release.
-</p>
-<p>
-Mesa 7.4.2 implements the OpenGL 2.1 API, but the version reported by
-glGetString(GL_VERSION) depends on the particular driver being used.
-Some drivers don't support all the features required in OpenGL 2.1.
-</p>
-<p>
-See the <a href="install.html">Compiling/Installing page</a> for prerequisites
-for DRI hardware acceleration.
-</p>
-
-
-<h2>MD5 checksums</h2>
-<pre>
-172f5193154dad731387f97bd44ab68f  MesaLib-7.4.2.tar.gz
-b10a76e32bde4645cfc34ea0416d7d8b  MesaLib-7.4.2.tar.bz2
-cc6dfc2efd424cc342b84e6bcd78ce5d  MesaLib-7.4.2.zip
-182a7e78aa7a480b3650a5c956dbddd1  MesaDemos-7.4.2.tar.gz
-bf559a0485667a3bfa4513a23501579b  MesaDemos-7.4.2.tar.bz2
-5379e622b65e8c22022dba34aeb6f4f9  MesaDemos-7.4.2.zip
-7cc43c1c35bf6a279a16e063dea3b8c5  MesaGLUT-7.4.2.tar.gz
-e0dfc44d537904a030861e5b3c760c11  MesaGLUT-7.4.2.tar.bz2
-4a6cf5bbbac190d6ba97448b3098b7f4  MesaGLUT-7.4.2.zip
-</pre>
-
-
-<h2>Bug fixes</h2>
-<ul>
-<li>Fixed segfault when rendering to front buffer with DRI 1.
-<li>Fixed swrast texture rectangle bug when wrap mode = GL_CLAMP_TO_BORDER and
-    filter mode = GL_LINEAR.  (bug 21461)
-<li>Fixed texture object mem leak during context destruction.
-<li>Fixed a state validation bug in glCopyTex[Sub]Image()
-<li>Fixed some i965 GLSL bugs.
-<li>Fixed an R300 driver texture object bad memory reference.
-</ul>
-
-
-
-<h2>Driver Status</h2>
-
-<pre>
-Driver			Status
-----------------------	----------------------
-DRI drivers		varies with the driver
-XMesa/GLX (on Xlib)	implements OpenGL 2.1
-OSMesa (off-screen)	implements OpenGL 2.1
-Windows/Win32		implements OpenGL 2.1
-Glide (3dfx Voodoo1/2)	implements OpenGL 1.3
-SVGA			unsupported
-Wind River UGL		unsupported
-DJGPP			unsupported
-GGI			unsupported
-BeOS			unsupported
-Allegro			unsupported
-D3D			unsupported
-</pre>
-
-</body>
-</html>

docs/relnotes-7.4.3.html

@@ -1,79 +0,0 @@
-<HTML>
-
-<TITLE>Mesa Release Notes</TITLE>
-
-<head><link rel="stylesheet" type="text/css" href="mesa.css"></head>
-
-<BODY>
-
-<body bgcolor="#eeeeee">
-
-<H1>Mesa 7.4.3 Release Notes / 19 June 2009</H1>
-
-<p>
-Mesa 7.4.3 is a stable development release fixing bugs since the 7.4.2 release.
-</p>
-<p>
-Mesa 7.4.3 implements the OpenGL 2.1 API, but the version reported by
-glGetString(GL_VERSION) depends on the particular driver being used.
-Some drivers don't support all the features required in OpenGL 2.1.
-</p>
-<p>
-See the <a href="install.html">Compiling/Installing page</a> for prerequisites
-for DRI hardware acceleration.
-</p>
-
-
-<h2>MD5 checksums</h2>
-<pre>
-34c5a6c47ed51f31c4fa36e269831352  MesaLib-7.4.3.tar.gz
-70a983ba3deaa8bd63b18bbab283f698  MesaLib-7.4.3.tar.bz2
-34f21b3205b271d575030aa98a2dda51  MesaLib-7.4.3.zip
-56752b7adede212e6097afb10d0c0d59  MesaDemos-7.4.3.tar.gz
-8ffa51c4833b1e298300a005e2d7ca2a  MesaDemos-7.4.3.tar.bz2
-0037d24d41400d6fb9800ae55b8c863f  MesaDemos-7.4.3.zip
-20e24f6692c0c90e7e3b220f79c4108d  MesaGLUT-7.4.3.tar.gz
-03a4beeef74fc5ef0b1d6d04710e5a8a  MesaGLUT-7.4.3.tar.bz2
-273788230adbdb9d57371309adedcf5f  MesaGLUT-7.4.3.zip
-</pre>
-
-
-<h2>Bug fixes</h2>
-<ul>
-<li>Fixed texture object reference counting bug (bug 21756)
-<li>Allow depth/stencil textures to be attached to GL_STENCIL_ATTACHMENT point
-    (SF bug 2793846)
-<li>Added missing glGet case for GL_VERTEX_ARRAY_BINDING_APPLE
-<li>Fixed some OSMesa build issues
-<li>Fixed a vertex buffer object crash
-<li>Fixed broken glTexImage3D() when image type = GL_BITMAP
-<li>Fixed some GLSL preprocessor bugs
-<li>Fixed framebuffer mem leak in i945/i965 DRI drivers
-<li>Fixed texture coordinate repeat bug in swrast (bug 21872)
-<li>Fixed incorrect viewport clamping (lower bound is zero, not one)
-<li>GLX fix for glean's makeCurrent test case
-</ul>
-
-
-
-<h2>Driver Status</h2>
-
-<pre>
-Driver			Status
-----------------------	----------------------
-DRI drivers		varies with the driver
-XMesa/GLX (on Xlib)	implements OpenGL 2.1
-OSMesa (off-screen)	implements OpenGL 2.1
-Windows/Win32		implements OpenGL 2.1
-Glide (3dfx Voodoo1/2)	implements OpenGL 1.3
-SVGA			unsupported
-Wind River UGL		unsupported
-DJGPP			unsupported
-GGI			unsupported
-BeOS			unsupported
-Allegro			unsupported
-D3D			unsupported
-</pre>
-
-</body>
-</html>

docs/relnotes-7.4.4.html

@@ -1,68 +0,0 @@
-<HTML>
-
-<TITLE>Mesa Release Notes</TITLE>
-
-<head><link rel="stylesheet" type="text/css" href="mesa.css"></head>
-
-<BODY>
-
-<body bgcolor="#eeeeee">
-
-<H1>Mesa 7.4.4 Release Notes / 23 June 2009</H1>
-
-<p>
-Mesa 7.4.4 is a stable development release fixing bugs since the 7.4.3 release.
-</p>
-<p>
-Mesa 7.4.4 implements the OpenGL 2.1 API, but the version reported by
-glGetString(GL_VERSION) depends on the particular driver being used.
-Some drivers don't support all the features required in OpenGL 2.1.
-</p>
-<p>
-See the <a href="install.html">Compiling/Installing page</a> for prerequisites
-for DRI hardware acceleration.
-</p>
-
-
-<h2>MD5 checksums</h2>
-<pre>
-0b56fe5a88ab0c3c5b2da5068f63f416  MesaLib-7.4.4.tar.gz
-b66528d314c574dccbe0ed963cac5e93  MesaLib-7.4.4.tar.bz2
-2818076f3ba23fa87fdfe4602a637a18  MesaLib-7.4.4.zip
-3e77b208386c47b18165bce5ae317e2c  MesaDemos-7.4.4.tar.gz
-628142ec9a54cd28cc027e6ce26cff47  MesaDemos-7.4.4.tar.bz2
-d08a30d30ab7174859aa709cba6c726d  MesaDemos-7.4.4.zip
-e6e91ba16e274d40cf3a97ad3218af01  MesaGLUT-7.4.4.tar.gz
-e14bbb52517e8121b31f1387515365ab  MesaGLUT-7.4.4.tar.bz2
-f10ed20469753c2b3d68c99854f80fd4  MesaGLUT-7.4.4.zip
-</pre>
-
-
-<h2>Bug fixes</h2>
-<ul>
-<li>Fixed i965/i915 segfault in screen destruction (bug 22408)
-</ul>
-
-
-
-<h2>Driver Status</h2>
-
-<pre>
-Driver			Status
-----------------------	----------------------
-DRI drivers		varies with the driver
-XMesa/GLX (on Xlib)	implements OpenGL 2.1
-OSMesa (off-screen)	implements OpenGL 2.1
-Windows/Win32		implements OpenGL 2.1
-Glide (3dfx Voodoo1/2)	implements OpenGL 1.3
-SVGA			unsupported
-Wind River UGL		unsupported
-DJGPP			unsupported
-GGI			unsupported
-BeOS			unsupported
-Allegro			unsupported
-D3D			unsupported
-</pre>
-
-</body>
-</html>

docs/relnotes-7.4.html

@@ -8,7 +8,7 @@
 
 <body bgcolor="#eeeeee">
 
-<H1>Mesa 7.4 Release Notes / 27 March 2009</H1>
+<H1>Mesa 7.4 Release Notes / date TBD</H1>
 
 <p>
 Mesa 7.4 is a stable development release fixing bugs since the 7.3 release.
@@ -20,21 +20,13 @@ Some drivers don't support all the features required in OpenGL 2.1.
 </p>
 <p>
 See the <a href="install.html">Compiling/Installing page</a> for prerequisites
-for DRI hardware acceleration.
+for DRI ardware acceleration.
 </p>
 
 
 <h2>MD5 checksums</h2>
 <pre>
-ed6bd7437177307e51e16d0c7c381dfa  MesaLib-7.4.tar.gz
-7ecddb341a2691e0dfdb02f697109834  MesaLib-7.4.tar.bz2
-433e823f8245f9fd5f397e7b719a8e47  MesaLib-7.4.zip
-656eee6128016fb237e01aa8dabbc703  MesaDemos-7.4.tar.gz
-02816f10f30b1dc5e069e0f68c177c98  MesaDemos-7.4.tar.bz2
-44a70d6db4aa4c64ecc47871b6aceee8  MesaDemos-7.4.zip
-25f80db4f8645cd3e58e2c9af53ec341  MesaGLUT-7.4.tar.gz
-04ec01caebde44f5b0d619f00716b368  MesaGLUT-7.4.tar.bz2
-019dc213baecaa3cb1278847d41b8591  MesaGLUT-7.4.zip
+tbd
 </pre>
 
 
@@ -61,7 +53,6 @@ ed6bd7437177307e51e16d0c7c381dfa  MesaLib-7.4.tar.gz
 <h2>Changes</h2>
 <ul>
 <li>Updated GL/glxext.h to version 48
-<li>Assorted updates for building on Solaris
 </ul>
 
 

docs/relnotes-7.5.1.html

@@ -1,72 +0,0 @@
-<HTML>
-
-<TITLE>Mesa Release Notes</TITLE>
-
-<head><link rel="stylesheet" type="text/css" href="mesa.css"></head>
-
-<BODY>
-
-<body bgcolor="#eeeeee">
-
-<H1>Mesa 7.5.1 Release Notes, 3 September 2009</H1>
-
-<p>
-Mesa 7.5.1 is a bug-fix release fixing issues found since the 7.5 release.
-</p>
-<p>
-The main new feature of Mesa 7.5.x is the
-<a href="http://wiki.freedesktop.org/wiki/Software/gallium"
-target="_parent">Gallium3D</a> infrastructure.
-</p>
-<p>
-Mesa 7.5.1 implements the OpenGL 2.1 API, but the version reported by
-glGetString(GL_VERSION) depends on the particular driver being used.
-Some drivers don't support all the features required in OpenGL 2.1.
-</p>
-<p>
-See the <a href="install.html">Compiling/Installing page</a> for prerequisites
-for DRI hardware acceleration.
-</p>
-
-
-<h2>MD5 checksums</h2>
-<pre>
-d7269e93bc7484430637d54ced250876  MesaLib-7.5.1.tar.gz
-877d6a4b24efc2b1d02aa553f262cba8  MesaLib-7.5.1.tar.bz2
-23f4fb757a05c8396425681234ae20e5  MesaLib-7.5.1.zip
-5af4bd113652108f5cec5113dad813f2  MesaDemos-7.5.1.tar.gz
-785402e3b9f0e335538fcc6bf19f6987  MesaDemos-7.5.1.tar.bz2
-950058cc6d6106e9c7d5876a03789fe9  MesaDemos-7.5.1.zip
-cb52ce2c93389c2711cbe8d857ec5303  MesaGLUT-7.5.1.tar.gz
-e3a9892e056d625c5353617a7c5b7e9c  MesaGLUT-7.5.1.tar.bz2
-da1de364df148c94b4994006191a1e69  MesaGLUT-7.5.1.zip
-</pre>
-
-
-<h2>New features</h2>
-<ul>
-<li>Added configure --with-max-width=W, --with-max-height=H options to specify
-    max framebuffer, viewport size.
-</ul>
-
-
-<h2>Bug fixes</h2>
-<ul>
-<li>Added missing GLEW library to MesaDemos tarballs.
-<li>Fixed swapbuffers jerkiness in Doom3/etc in Intel drivers.
-<li>Fixed front buffer rendering bug in Intel drivers.
-<li>Fixed minor GLX memory leaks.
-<li>Fixed some texture env / fragment program state bugs.
-<li>Fixed some Gallium glBlitFramebuffer() bugs
-<li>Empty glBegin/glEnd() pair could cause divide by zero (bug 23489)
-<li>Fixed Gallium glBitmap() Z position bug
-<li>Setting arrays of sampler uniforms did not work
-<li>Selection/Feedback mode didn't handle polygon culling correctly (bug 16866)
-<li>Fixed 32/64-bit cross compilation issue in gen_matypes.c
-<li>Fixed glXCreateGLXPixmap() for direct rendering.
-<li>Fixed Gallium glCopyPixels(GL_STENCIL_INDEX) mispositioned image bug.
-</ul>
-
-
-</body>
-</html>

docs/relnotes-7.5.2.html

@@ -1,67 +0,0 @@
-<HTML>
-
-<TITLE>Mesa Release Notes</TITLE>
-
-<head><link rel="stylesheet" type="text/css" href="mesa.css"></head>
-
-<BODY>
-
-<body bgcolor="#eeeeee">
-
-<H1>Mesa 7.5.2 Release Notes, 28 September 2009</H1>
-
-<p>
-Mesa 7.5.2 is a bug-fix release fixing issues found since the 7.5.1 release.
-</p>
-<p>
-The main new feature of Mesa 7.5.x is the
-<a href="http://wiki.freedesktop.org/wiki/Software/gallium"
-target="_parent">Gallium3D</a> infrastructure.
-</p>
-<p>
-Mesa 7.5.2 implements the OpenGL 2.1 API, but the version reported by
-glGetString(GL_VERSION) depends on the particular driver being used.
-Some drivers don't support all the features required in OpenGL 2.1.
-</p>
-<p>
-See the <a href="install.html">Compiling/Installing page</a> for prerequisites
-for DRI hardware acceleration.
-</p>
-
-
-<h2>MD5 checksums</h2>
-<pre>
-43a90191dd9f76cd65dcc1ac91f3be70  MesaLib-7.5.2.tar.gz
-94e47a499f1226803869c2e37a6a8e3a  MesaLib-7.5.2.tar.bz2
-1ecb822b567ad67a0617361d45206b67  MesaLib-7.5.2.zip
-2718fdce7e075911d6147beb8f27104b  MesaDemos-7.5.2.tar.gz
-4e0f5ccd58afe21eddcd94327d926e86  MesaDemos-7.5.2.tar.bz2
-f621f8c223b278d7c8e49a012d56ca25  MesaDemos-7.5.2.zip
-83c16c1d6bcfcc3f97aab5d2fe430b4c  MesaGLUT-7.5.2.tar.gz
-e5d03bedae369ea3705783573bb33813  MesaGLUT-7.5.2.tar.bz2
-e82ba28e00d653e6f437d32be8ca8481  MesaGLUT-7.5.2.zip
-</pre>
-
-
-<h2>New features</h2>
-<ul>
-<li>Detect B43 chipset in Intel driver
-</ul>
-
-
-<h2>Bug fixes</h2>
-<ul>
-<li>Assorted bug fixes for i965/i945 drivers
-<li>Fixed Gallium glDrawPixels(GL_STENCIL_INDEX) failure.
-<li>Fixed GLSL linker/preprocessor version directive issue seen in Wine
-    (such as bug 23946)
-<li>glUseProgram() is now compiled into display lists (bug 23746).
-<li>glUniform functions are now compiled into display lists
-<li>Auto mipmap generation didn't work reliably with Gallium.
-<li>Fixed random number usage in GLX code.
-<li>Fixed invalid GL_OUT_OF_MEMORY error sometimes raised by glTexSubImage2D
-    when using Gallium.
-</ul>
-
-</body>
-</html>

docs/relnotes-7.5.html

@@ -1,102 +0,0 @@
-<HTML>
-
-<TITLE>Mesa Release Notes</TITLE>
-
-<head><link rel="stylesheet" type="text/css" href="mesa.css"></head>
-
-<BODY>
-
-<body bgcolor="#eeeeee">
-
-<H1>Mesa 7.5 Release Notes / 17 July 2009</H1>
-
-<p>
-Mesa 7.5 is a new development release.
-People who are concerned with stability and reliability should stick
-with the 7.4.x branch or wait for Mesa 7.5.1.
-</p>
-<p>
-The main new feature of Mesa 7.5 is the
-<a href="http://wiki.freedesktop.org/wiki/Software/gallium"
-target="_parent">Gallium3D</a> infrastructure.
-</p>
-<p>
-Mesa 7.5 implements the OpenGL 2.1 API, but the version reported by
-glGetString(GL_VERSION) depends on the particular driver being used.
-Some drivers don't support all the features required in OpenGL 2.1.
-</p>
-<p>
-See the <a href="install.html">Compiling/Installing page</a> for prerequisites
-for DRI hardware acceleration.
-</p>
-<p>
-Note that the Mesa project is no longer using odd/even version numbers
-to indicate development/stable releases.
-The so-called development releases have been fairly stable.
-If you're especially concerned with stability you should probably look for
-"point" releases such as 7.5.1 which will be a bug-fix release.
-</p>
-
-
-<h2>MD5 checksums</h2>
-<pre>
-553fd956e544727f30fbe249619b6286  MesaLib-7.5.tar.gz
-459f332551f6ebb86f384d21dd15e1f0  MesaLib-7.5.tar.bz2
-8c02c0e17a9025250d20424ae32f5163  MesaLib-7.5.zip
-a188da2886fa5496ea0c2cda602b2eeb  MesaDemos-7.5.tar.gz
-398ee8801814a00e47f6c2314e3dfddc  MesaDemos-7.5.tar.bz2
-15a0c8ae013c54335a26335e1a98d609  MesaDemos-7.5.zip
-81010147def5a644ba14f9bbb7a49a2a  MesaGLUT-7.5.tar.gz
-baa7a1e850b6e39bae58868fd0684004  MesaGLUT-7.5.tar.bz2
-265228418e4423fa328f2f5b7970cf08  MesaGLUT-7.5.zip
-</pre>
-
-
-<h2>New features</h2>
-<ul>
-<li>Gallium3D - this is the new architecture for OS-independent and
-    API-independent 3D drivers.
-    Gallium3D is intended for GPUs that fully support  vertex/fragment shaders.
-    The Gallium3D drivers currently included are:
-    <ul>
-    <li>softpipe - a software/reference driver
-    <li>i915 - Intel 915/945 driver
-    <li><a href="cell.html">Cell</a> - IBM/Sony/Toshiba Cell processor driver
-    <li>nouveau (for NVIDIA GPUs) and R300 for (AMD/ATI R300).
-        <b>PLEASE NOTE: these drivers are incomplete and still under development.
-        It's probably NOT worthwhile to report any bugs unless you have patches.
-        </b>
-    </ul>
-<li>GL_ARB_framebuffer_object extension (software drivers, i965 driver)
-<li>Reworked two-sided stencil support.
-This allows a driver to support all three variations of two-sided stencil
-including GL_ATI_separate_stencil, GL_EXT_stencil_two_side and OpenGL 2.0
-<li>GL_EXT_vertex_array_bgra extension (software drivers, i965 driver)
-<li>GL_NV_texture_env_combine4 extension (software drivers, i965/i915 drivers)
-<li>GL_EXT_texture_swizzle extension (software drivers, i965 driver)
-<li>Updated SPARC assembly optimizations (David S. Miller)
-<li>Initial support for separate compilation units in GLSL compiler.
-<li>Increased max number of generic GLSL varying variables to 16 (formerly 8).
-<li>GLSL linker now detects when too many varying variables are used.
-<li>Optimize-out redundant glMaterial and glShadeModel calls in display lists
-<li>Fixed gl_TextureMatrix[i][j] array indexing bug in GLSL compiler.
-</ul>
-
-
-<h2>Bug fixes</h2>
-<ul>
-<li>Lots of i965 driver bug fixes
-<li>Fixed some GLSL preprocessor bugs
-<li>GLSL: continue inside of a for-loop didn't work
-</ul>
-
-
-<h2>Changes</h2>
-<ul>
-<li>Remove support for GL_SGIX_shadow, GL_SGIX_shadow_ambient and
-GL_SGIX_depth_texture extensions.  Superseded by the ARB versions.
-<li>Omitted some old Mesa demos from the release tarballs, added some others.
-</ul>
-
-</body>
-</html>

docs/relnotes-7.6.1.html

@@ -1,80 +0,0 @@
-<HTML>
-
-<TITLE>Mesa Release Notes</TITLE>
-
-<head><link rel="stylesheet" type="text/css" href="mesa.css"></head>
-
-<BODY>
-
-<body bgcolor="#eeeeee">
-
-<H1>Mesa 7.6.1 Release Notes, 21 December 2009</H1>
-
-<p>
-Mesa 7.6.1 is a bug-fix release fixing issues since version 7.6.
-</p>
-<p>
-Mesa 7.6.1 implements the OpenGL 2.1 API, but the version reported by
-glGetString(GL_VERSION) depends on the particular driver being used.
-Some drivers don't support all the features required in OpenGL 2.1.
-</p>
-<p>
-See the <a href="install.html">Compiling/Installing page</a> for prerequisites
-for DRI hardware acceleration.
-</p>
-
-
-<h2>MD5 checksums</h2>
-<pre>
-e80fabad2e3eb7990adae773d6aeacba  MesaLib-7.6.1.tar.gz
-7db4617e9e10ad3aca1b64339fd71b7d  MesaLib-7.6.1.tar.bz2
-dd3275dbf9833480d2e92d0c69b22abd  MesaLib-7.6.1.zip
-f7fdcfe3c0f363e571c60f02f74368fb  MesaDemos-7.6.1.tar.gz
-a4226f06732a02556fcf6be290b86dff  MesaDemos-7.6.1.tar.bz2
-849425f356bd940726cebedfa79de176  MesaDemos-7.6.1.zip
-d40cc7c5e337a85b674e27a8e494f52f  MesaGLUT-7.6.1.tar.gz
-ca9aecb91f05b1da9fd7d5eeb19d47d7  MesaGLUT-7.6.1.tar.bz2
-23fad8398004c977a1d8953079b72ca6  MesaGLUT-7.6.1.zip
-</pre>
-
-
-<h2>New features</h2>
-<ul>
-<li>Upgraded GL/glext.h to version 56, GL/glxext.h to version 25,
-    GL/wglext.h to version 17
-<li>New 3D driver, r600, for Radeon R6xx, R7xx hardware
-</ul>
-
-
-<h2>Bug fixes</h2>
-<ul>
-<li>Fixed crash caused by glXCopyContext() and glXDestroyContext(), bug 24217
-<li>glXQueryContext(GLX_RENDER_TYPE) returned wrong values (bug 24211)
-<li>GLSL sqrt(0) returned unpredictable results
-<li>Fixed default texture binding bug when a bound texture was deleted.
-<li>r300: Work around an issue with very large fragment programs on R500.
-<li>Fake glXQueryDrawable() didn't return good values (bug 24320)
-<li>Fixed AUX buffer breakage (bug 24426).
-<li>Fixed locale-dependent float parsing bug in GLSL compiler (bug 24531)
-<li>Fixed Gallium Cell driver compilation failure.
-<li>Fixed glGetTexLevelParameter(GL_TEXTURE_INTERNAL_FORMAT) query so that
-    it returns the actual compressed format chosen.
-<li>Fixed glBitmap bugs in Intel drivers.
-<li>Fixed a number of Microsoft Visual Studio compilation problems.
-<li>Fixed clipping / provoking vertex bugs in i965 driver.
-<li>Assorted build fixes for AIX.
-<li>Endianness fixes for the DRI swrast driver (bug 22767).</li>
-<li>Point sprite fixes for i915/945 driver.
-<li>Fixed assorted memory leaks (usually on error paths)
-<li>Fixed some GLSL compiler bugs (ex: 25579)
-<li>Assorted build fixes for BlueGene
-</ul>
-
-<h2>Changes</h2>
-<ul>
-<li>Removed old VC6, VC7 project files for Windows
-</ul>
-
-
-</body>
-</html>