It's not in the key, so it randomly may or may not be present, and if it
is present then we don't actually save/restore the contents, so we will
save/restore random pointer values from the last run. Turnip already
disables searching the shader cache when assembly is requested, but
still wrote the final ir3_shader_variant which resulted in trying to
save random stale pointers when saving off the executable if a
subsequent compile hit that cache entry.
This fixes flakes in
dEQP-VK.pipeline.pipeline_library.shader_module_identifier.pipeline_from_id.*
for me.
Fixes: 56909868cd ("turnip: implement VK_KHR_pipeline_executable_properties")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20056>
(cherry picked from commit 8ba2d612d5)
Using a designated initializer like this leaves padding bits, which form
part of the aliasing u64/f64 member of the union, uninitialised, but a
nir_const_value must always have the unused bits zeroed out. Thus, use
the nir_const_value_for_float helper instead like everywhere else which
will do a memset 0 for us first.
Without this, using the pan_blend shader in a build with validation
enabled fails with:
NIR validation failed after nir_lower_vars_to_ssa
...
vec4 32 ssa_58 = load_const (0x3f7cfcfd /* 0.988235 */, 0x3f7cfcfd /* 0.988235 */, 0x3f7cfcfd /* 0.988235 */, 0x3f800000 /* 1.000000 */)
error: memcmp(val, &cmp_val, sizeof(cmp_val)) == 0 (../src/compiler/nir/nir_validate.c:976)
Fixes: 1378c67bcf ("panfrost/blend: Inline blend constants")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20071>
(cherry picked from commit 750325730b)
Starting with !19748 lowered 64 bit shifts were showing wrong results for
shifts with insignificant bits set.
nir shifts are defined to only look at the least significant bits. The
lowering has take this into account.
So there are two things going on:
1. the `ieq` and `uge` further down depend on `y` being masked.
2. the calculation of `reverse_count` actually depends on a masked `y` as
well, due to the `(iabs (iadd y -32))` giving a different result for
shifts > 31;
Fixes: 41f3e9e5f5 ("nir: Implement lowering of 64-bit shift operations")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19995>
(cherry picked from commit 5398dd04bf)
Clearing ts_size - ts_offset bytes in a level means we are clearing the
TS region of all layers in the level starting from the surface layer, so
clearing one surface might corrupt all other layers of a resource level.
Use the correct size to clear only the requested TS region.
Cc: mesa-stable
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19814>
(cherry picked from commit b6fa3cdb0e)
Up-aligning the blit height does not always work, as some blit targets
have a smaller padded height. Fall back to single pipe operation if
increasing the height alignment fails. Still try to do it opportunistically
as it improves performance when resolving MSAA targets.
Fixes: 0ff96aaef3 ("etnaviv: rs: fix MSAA alignment adjustment")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19991>
(cherry picked from commit 797454edfc)
NIR shifts are defined to truncate the shift amount to the number of bits
needed to represent the bit-size of the value shifted. LLVM treats large
shifts as poison. This fix achieves NIR semantics for shifts.
As an example, a|(b << 32), where "a" is 32bits, should produce a|b
according to NIR (because 32&31 == 0).
This caused LLVM to incorrectly optimize "(a >> c) | (b << (32 - c))" to a
u2u32(pack_64_2x32(a, b) >> c) (v_alignbit_b32), when the original NIR
should have returned "a | b" if c==0.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Mihai Preda <mhpreda@gmail.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19966>
(cherry picked from commit 064336d359)
We only copy two components, we have to use the complete original source,
and we should rewrite the new source from scratch to avoid incorrect
dimension and indirect handling.
Fixes: 036d7172c (virgl: Move double operands to a temp to avoid double-swizzling bugs)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19975>
(cherry picked from commit d5217b024e)
It's legal in OpenGL to start a query even if the result will have zero
valid bits. It's not enough to just report zero bits, We need to also
prevent calling down into the driver with these invalid queries.
Because ARB_ES3_compatibility adds ANY_SAMPLES_PASSED and
ANY_SAMPLES_PASSED_CONSERVATIVE to the set of queries that support zero
bits, we also need to check for the corresponding indices.
Fixes: 0186e9e1c5 ("mesa: always support occlusion queries")
Reviewed-by: Soroush Kashani <soroush.kashani@imgtec.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19750>
(cherry picked from commit 1b1e8873fe)
The mesa state-tracker can now emulate all formats indicated by this
feature-flag, so we don't require this for OpenGL 4.2 any more.
It's however a good idea to support for power-usage and performance
reasons, saving on memory bandwidth. So let's move it to the
gl46_optimal block instead.
Fixes: e4ff42684b ("mesa/st: enable bptc extension with fallback")
Fixes: 2ea481b2f0 ("Zink: add Zink profiles file")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19779>
(cherry picked from commit 13bccac5a7)
We never required the uniform texel buffer bit for more than
bufferFeatures for a bunch of these formats.
Similarly, we *don't* need the uniform texel buffer bit for sampled
image access.
For the image-dimensions, the Mesa frontend doesn't validate the max 1D,
3D or Cube sizes, nor the max texture layers. So we'll expose GL 4.1
without these, even if that's not conformant.
Finally, we don't require robustImageAccess2 for OpenGL 4.3 at all. All
we need is the robustBufferAccess feature.
Fixes: 2ea481b2f0 ("Zink: add Zink profiles file")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19779>
(cherry picked from commit b60bc52992)
Fixes a number of CTS patterns on DG2 :
- dEQP-VK.dynamic_rendering.primary_cmd_buff.random*
- dEQP-VK.draw.*secondary_cmd*
- dEQP-VK.dynamic_rendering.*secondary_cmd*
- dEQP-VK.geometry.*secondary_cmd_buffer
- dEQP-VK.multiview.*secondary_cmd*
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 9c1c1888d9 ("intel/fs: put scratch surface in the surface state heap")
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19946>
(cherry picked from commit 9bb055ff5d)
static constexpr const 'value' is replaced by static function
in all type_char template specializations
to avoid the following building errors happening with clang 6
/home/utente/pie-x86_kernel/prebuilts/clang/host/linux-x86/clang-4691093/bin/ld.lld: error: undefined symbol: r600::type_char<r600::ExportInstr>::value
>>> referenced by sfn_scheduler.cpp
>>> sfn_sfn_scheduler.cpp.o:(bool r600::BlockSheduler::collect_ready_type<r600::ExportInstr>(std::__1::list<r600::ExportInstr*, std::__1::allocator<r600::ExportInstr*> >&, std::__1::list<r600::ExportInstr*, std::__1::allocator<r600::ExportInstr*> >&)) in archive src/gallium/drivers/r600/libr600.a
...
/home/utente/pie-x86_kernel/prebuilts/clang/host/linux-x86/clang-4691093/bin/ld.lld: error: undefined symbol: r600::type_char<r600::RatInstr>::value
>>> referenced by sfn_scheduler.cpp
>>> sfn_sfn_scheduler.cpp.o:(bool r600::BlockSheduler::collect_ready_type<r600::RatInstr>(std::__1::list<r600::RatInstr*, std::__1::allocator<r600::RatInstr*> >&, std::__1::list<r600::RatInstr*, std::__1::allocator<r600::RatInstr*> >&)) in archive src/gallium/drivers/r600/libr600.a
clang-6.0: error: linker command failed with exit code 1 (use -v to see invocation)
Cc: "22.2" "22.3" mesa-stable
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19873>
(cherry picked from commit e74d989a69)
If a shader has XFB outputs but the application never enables
streamout in runtime (no buffers bound and no begin/end pair), we
have to disable it in the shader by emitting buffer size as 0. It's
also still needed to remember that the cmdbuf needs GDS/GDS OA BOs,
so move this at pipeline bind time instead.
Cc: 22.3 mesa-stable
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19801>
(cherry picked from commit 3189be249d)
The NGG streamout lowering pass allocates space for all outputs which
means we have to align our computation. Otherwise, the maximum number
of vertices is incorrect and we end up by reaching the maximum allowed
LDS size. This code could be shared instead of being duplicated but
that's for later.
Fixes some transform feedback tests with Zink and
RADV_PERFTEST=ngg_streamout on GFX10.3.
Cc: 22.3 mesa-stable
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19801>
(cherry picked from commit ba81dcf971)
This fixes a longstanding bug in the interaction between TS and a write
mapping. The write does not update TS regardless of the way the update
is done. Update via etna_copy_resource would just set the target ts_valid
to false without actually writing back any dirty TS to the resource.
Writes via the CPU would update the resource, but keep ts_valid at true
even if the tile status may now not match the actually written tiles of
the resource anymore.
Fix this by writing back a dirty TS to the target resource if needed
before updating the level with the write data. Always invalidate TS,
even when the update is done by the CPU.
Cc: mesa-stable
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19846>
(cherry picked from commit 0fb813526e)
Consider the loop:
float i = 0.0;
while (true) {
if (i != 0.0)
break;
i = i + 1.0;
}
This loop clearly executes exactly one time.
Some trickery is necessary to handle cases where the initial loop value
is very large and the increment is, by comparison, very small. From the
fenu_once test case,
float i = -604462909807314587353088.0;
while (true) {
if (i != -604462909807314587353088.0)
break;
i = i + 36028797018963968.0;
}
This loop should also execute exactly once, but this is much more
challenging to calculate due to precision issues.
Going towards smaller magnitude (i.e., adding a small positive value to
a large negative value) requires a smaller delta to make a difference
than going towards a larger magnitude. For this reason,
-604462909807314587353088.0 + 36028797018963968.0 !=
-604462909807314587353088.0, but -604462909807314587353088.0 +
-36028797018963968.0 == -604462909807314587353088.0. Math class is
tough.
No changes in shader-db or fossil-db.
v2: Fix major bug in checking result of the eval_const_binop(nir_op_feq,
...) discovered while developing fneu_once_easy unit test. Fix a typo in
the comment just above that. Add fneu_once_easy test.
v3: Skip the iteration count adjustment tests for nir_op_fenu and
nir_op_ine. Since the iteration count is either 1 or unknown, all this
function can do is add numerical error. Add fenu_once tests.
v4: Change the initial value in the fneu_once test from large positive
to large negative. Change check in get_iteration from nir_op_fsub to
nir_op_fadd. Both changes from discussion with M Henning. Also add some
more explanation in fneu_once.
v5: Rename test cases.
Fixes: 6772a17acc ("nir: Add a loop analysis pass")
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19732>
(cherry picked from commit f75c83c4aa)
I discovered this problem because adding an algebraic transformation to
convert some uge and ult to ieq or ine caused a couple loops to stop
unrolling. Consider the loop:
uint i = 0;
while (true) {
if (i >= 1)
break;
i++;
}
This loop clearly executes exactly one time. Note that uge(x, 1) is
equivalent to ine(x, 0). Changing the condition to 'if (i != 0)' will
also execute exactly one time.
In the added test cases, uge_once correctly get an exact loop trip count
of 1. Without the changes to nir_loop_analyze.c, the ine_once case
detects a maximum loop trip count of zero and does not get an exact loop
trip count.
No changes in shader-db or fossil-db.
v2: Move nir_op_fneu changes to a separate commit.
v3: Rename test cases.
Fixes: 6772a17acc ("nir: Add a loop analysis pass")
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19732>
(cherry picked from commit d9f014401b)
There seems to be a problem with running firefox by using Xwayland that
results in a shared resources being not always tagged as using staging.
As a result one process tries to map the resource that was allocated as
one that uses staging without actually using the staging resource, and
hence the mapped range only accounts for the small region that we have
to allocated because a zero-allocation doesn't work, but the application
mapping the resource assumes that a properly sized range is mapped, and
consequently this results in invalid memory access.
To work around this issue disable creating staging for resources that
are created by using shared binding. It is not clear to me whether this
is the best fix, but it seems to quell the issue.
Fixes: c9d99b7eec
virgl: Fix texture transfers by using a staging resource
Related: https://gitlab.freedesktop.org/virgl/virglrenderer/-/issues/291
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19655>
(cherry picked from commit e496d24cb2)
In 4ceaed7839 we made scratch surface state allocations part of the
internal heap (mapped to STATE_BASE_ADDRESS::SurfaceStateBaseAddress)
so that it doesn't uses slots in the application's expected 1M
descriptors (especially with vkd3d-proton).
But all our compiler code relies on BSS
(STATE_BASE_ADDRESS::BindlessSurfaceStateBaseAddress).
The additional issue is that there is only 26bits of surface offset
available in CS instruction (CFE_STATE, 3DSTATE_VS, etc...) for
scratch surfaces. So we need the drivers to put the scratch surfaces
in the first chunk of STATE_BASE_ADDRESS::SurfaceStateBaseAddress
(hence all the driver changes).
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 4ceaed7839 ("anv: split internal surface states from descriptors")
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/7687
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19727>
(cherry picked from commit 9c1c1888d9)
* load_uniform for sand8_stride is uint32 instead of int32 and its range
is 4 instead of 1 as it is counted in bytes.
* Now we save and restore constant buffer 1 properly for the ubo used
in the blit. We need to take into account that in V3D the first UBO
with index 0 is stored on constant buffer 1, because gallium uses
internally contant buffer 0 (See for reference commit c8212731e7)
* Removed not needed return.
* Added shader information about uniforms, ubos, inputs and outputs.
* Fixed typos in the comments.
Fixes: 95c4f0f910 "v3d: Enables DRM_FORMAT_MOD_BROADCOM_SAND128 support"
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19639>
(cherry picked from commit c82775e3c7)
Found when 16bit vec3 varying with llvm14 (not found
when llvm15), one 32bit vec4 slot is filled like this:
vec3[0] | undef
vec3[1] | undef
vec3[2] | undef
undef | undef
LLVM error is for the elements with undef:
%287 = insertelement float %280, half %279, i64 0
After this change, we get:
%287 = insertelement <2 x half> %280, half %279, i64 0
Fixes: 279eea5bda ("amd/llvm: Transition to LLVM "opaque pointers"")
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19848>
(cherry picked from commit e3b1f26a2b)
Moving entire chunks of code into a dummy if block is causing issues
in some situations. To work around the issue that we tried to fix in
35d82ecf1e ("nir/lower_shader_calls: put inserted instructions into a
dummy block") which is that we cannot cut and past a block of
instruction that ends with a jump if there are more instruction behind
where we're going to past. We can instead just wraps the jumps into
dummy if blocks.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable
Reviewed-by: Konstantin Seurer <konstantin.seurer@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19820>
(cherry picked from commit 3686d5a312)
__builtin_clz(value - 1) is undefined for with value=1 (because
__builtin_clz(0) is undefined).
Because we set rt_pipeline->stack_size = 1 when a ray tracing pipeline
doesn't need any stack allocation to differentiate from a dynamic size
(rt_pipeline->stack_size = 0) we can run into this undefinied behavior
issue.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: f68d64dac0 ("anv: Add support for vkCmdSetRayTracingPipelineStackSizeKHR")
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19781>
(cherry picked from commit 440da44a84)
This case was missed in
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18826 ,
resulting in native Wayland apps failing with
../src/vulkan/wsi/wsi_common_drm.c:452: wsi_configure_native_image: Assertion `!"Failed to find a supported modifier! This should never " "happen because LINEAR should always be available"' failed.
if the Wayland compositor advertises only the INVALID modifier.
Fixes: c315e20d61 ("vulkan/wsi/wayland: Configure images via params passed to wsi_swapchain_init()")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19795>
(cherry picked from commit 8d7aa4279a)
Refactor accesses to batch->resources to happen through safe helpers
that update the appropriate bookkeeping. This makes it obvious that (in
particular) reference counts are updated when they should be.
The functional change is that we are now correctly unreferencing
resources during shadowing, fixing a leak of shadowed resources.
Closes: #7362
Fixes: 2d8f28df73 ("panfrost: Replace resource shadowing flush")
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reported-by: Mastodon, apparently
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19753>
(cherry picked from commit 42212a9bfd)
In linear PE mode the early and late depth stage do not only disagree
about the cache layout, but they seem to fundamentally disagree about
the buffer layout. When Z was written via the late stage, early tests
always show spurious zfails, even if they are not in the same draw
call. Cache flushing and pipe stalls don't help in that case.
The only option to get reliable Z tests with linear render targets is
to move all Z handling into the PE stage. Even when early Z writes
are possible, we don't know if any other draw to the same surface
needs late Z handling, so we must never use the early stage.
Fixes: 53445284a4 ("etnaviv: add linear PE support")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19686>
(cherry picked from commit 7fe91c9f66)
Apparently MSAA doesn't only add another input, but it also increases
required temporaries by one. Simple programs where the register demand
is given by the number of inputs did work fine, while more complex ones,
where register demand is given by the number of temporaries exhibit
rendering issues without this fix.
Cc: 22.3 mesa-stable
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19582>
(cherry picked from commit e65d266529)
We don't need to login anymore, but we can't use plain minio commands
now. `ci-fairy` got a helper as `s3cp` to keep an almost identical
API.
Solved Conflicts:
.gitlab-ci/common/init-stage2.sh
.gitlab-ci/container/lava_build.sh
.gitlab-ci/prepare-artifacts.sh
src/amd/ci/traces-amd.yml
src/freedreno/ci/traces-freedreno.yml
src/gallium/frontends/lavapipe/ci/traces-lavapipe.yml
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
(cherry picked from commit 67cee534a8)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19734>
With new S3 support, we can use JWT-only server interaction via the
removal of `role-session` and `minio-host` arguments from PIGLIT_ARGS in
YAML.
This parameter change will come in a later commit.
Solved Conflicts:
.gitlab-ci/container/build-piglit.sh
.gitlab-ci/image-tags.yml
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
(cherry picked from commit 70ce1dcacc)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19734>
After 'v3dv: fix debug dump on BO free' we changed the order, and this
lead to the following test
dEQP-VK.api.object_management.multithreaded_per_thread_resources.device_memory_small
v2: Expanded comment just before the reset, explaining that we need to
do the reset before we free the BO from the kernel (Iago)
Raising this assertion:
deqp-vk: ../src/broadcom/vulkan/v3dv_bo.c:281: v3dv_bo_alloc: Assertion `bo && bo->handle == 0' failed.
Fixes: 2c44597181 ('v3dv: fix debug dump on BO free')
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19693>
(cherry picked from commit ec1cdc13d5)
We should not use "nuw" here as negative add positive may wrap
around (negative is 0xffffff??).
This problem can be observed with LLVM15 (I can't see when LLVM14):
%.neg = mul nsw i32 %31, -4
%163 = add nuw nsw i32 %.neg, 16
%164 = lshr i32 257, %.neg
%165 = lshr i32 %164, %163
LLVM just assume %.neg is possitive, so pre-shift 0x01010101 by 16.
This get wrong value because we can't get back the shifted bits with
a negative shift right.
Fixes: 75dbb40439 ("ac/nir: Remove byte permute from prefix sum of the repack sequence.")
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19718>
(cherry picked from commit 982b523769)
This fixes GALLIVM_DEBUG=asm for compute shaders, changing
the hooks after dumping causes a segfault because the
memory has already been finalised. Just add the hooks always,
and before dumping anything.
Fixes: f511d2a553 ("gallivm: rework coroutine malloc/free callouts.")
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19714>
(cherry picked from commit fb7de303ba)
The code builds up the dynamic array of objects (spirv_objs) and
collect pointers to each of them into another dynamic
array (spirv_ptr_objs).
If the growth of the first array cause a reallocation, it is
possible that the previous pointers end up invalid.
Fixes: 77e929a527 ("intel/clc: allow multiple CL files to be compiled together")
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19730>
(cherry picked from commit 9fd1d47aa0)
On Intel HW we use the same mechanism for internal operations surfaces
as well as application surfaces (VkDescriptor).
This change splits the surface pool in 2, one part dedicated to
internal allocations, the other to application VkDescriptors.
To do so, the STATE_BASE_ADDRESS::SurfaceStateBaseAddress points to a
4Gb area, with the following layout :
- 1Gb of binding table pool
- 2Gb of internal surface states
- 1Gb of bindless surface states
That way any entry from the binding table can refer to both internal &
bindless surface states but none of the driver allocations interfere
with the allocation of the application.
Based off a change from Sviatoslav Peleshko.
v2: Allocate image view null surface state from bindless heap (Sviatoslav)
Removed debug stuff (Sviatoslav)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/7110
Cc: mesa-stable
Tested-by: Sviatoslav Peleshko <sviatoslav.peleshko@globallogic.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19275>
(cherry picked from commit 4ceaed7839)
If we're in handle_collect()'s dst allocation and are part of a merge set
near the end of the file, our check for reg_elem_size(reg) would let us
use the preferred reg when that would immediately lead to
allocate_dst_fixed() creating an interval extending thruogh reg_size(reg)
that overflows the file.
Avoids a regression on gfxbench5/gl_5_high_off/17.shader_test in the next
commit. No change on shader-db.
Cc: mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18946>
(cherry picked from commit a39113b616)
While Panfrost allocates linear images with strides that are a multiple of 64
bytes, other dma-buf producers on the system may not satisfy this requirement.
However, at least on v7 and newer, any image with a regular format must have a
stride that is a multiple of 64 bytes.
This fixes a real bug in an application that created a linear R8_UNORM image
with stride 480 bytes, imported it as an EGL_image, and then tried to texture
from it with the GPU. Previously, the driver allowed this situation but it
resulted in an imprecise fault from the GPU. This patch corrects the driver to
reject the import as invalid due to the unaligned stride, ensuring we never
attempt to texture from such a resource.
To implement, we add some new layout queries to centralize knowledge about the
stride alignment requirements, and we sprinkle in asserts to show how the
invariant is upheld throughout the lifecycle of image creation to texturing.
Cc: mesa-stable
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19620>
(cherry picked from commit 811f8a1946)
This can cause us to stomp the contents of r5 before we have a chance to read
it, like this:
0x3d103186bb800000 nop ; nop ; ldvary.r0
0x3d105686bbf40000 nop ; mov rf26, r5 ; ldvary.r1
0x020000ef0000d000 bu.allna 232, r:unif (0x0000001c / 0.000000)
0x3d1096c6bbf40000 nop ; mov rf27, r5 ; ldvary.r2
Here, the MOV in the last instruction is supposed to read r5 produced from
ldvary.r0, but because we have inserted the bu instruction in between now
that read happens at the same time that ldvary.r1 updates r5, stomping the
value we were supposed to read.
Fix this by disallowing injection of a branch instruction in between an ldvary
instruction and its write to the r5 register 2 instructions later.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/7062
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
cc: mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19616>
(cherry picked from commit 1174f37609)
The back-end swizzles dwords so that our indirect scratch messages match
the memory layout of spill/fill messages for better cache coherency.
The swizzle happens at a DWORD granularity. If a read or write crosses
a DWORD boundary, the first bit will get correctly swizzled but whatever
piece lands in the next dword will not because the scatter instructions
assume sequential addresses for all bytes. For DWORD writes, this is
handled naturally as part of scalarizing. For smaller writes, we need
to be sure that a single write never escapes a dword.
Fixes: fd04f858b0 ("intel/nir: Don't try to emit vector load_scratch instructions")
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/7364
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19580>
(cherry picked from commit 25c180b509)
Because dup_mem_intrinsic() retains the SSA offset from the original
intrinsic and only modifies it by adding a constant, we can compute the
alignment based on the original alignment and the constant offset. This
is both easier and more accurate.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19580>
(cherry picked from commit 85685cf932)
If an application was transitioning out of fullscreen exclusive
display mode, the wsi_display_connector->active state was not
reset in vkReleaseDisplay() from fullscreen. When the app then
later tried to go to fullscreen display mode again on the same
display output with the same video mode, this caused
_wsi_display_queue_next() to skip a required drmModeSetCrtc()
during the first vkQueuePresent() after entering direct display
mode.
While this often worked by pure luck on a single-display setup,
it goes sideways on a multi-display setup where the viewport
of the associated crtc does not have a (x,y) offset of (0,0).
E.g., XOrg/X11 RandR output leasing of an output whose viewport
starts at x = 1920:
1. X-Server has RandR outputs viewport at x = 1920, in a shared
framebuffer, shared across all crtc's on a X-Screen.
2. Application leases that output for direct display mode,
1st vkQueuePresent() triggers drmModeSetCrtc() of output
to (x,y) = 0,0, as required for Vulkan/wsi/direct framebuffer
setup.
3. Application does rendering and presenting.
4. Application vkReleaseDisplay() the output, terminates the
RandR lease. X-Server takes over again.
5. X-Server modesets to reconfigure output back to viewport
with (x,y) = 1920, 0.
6. Application leases same output again later on, and tries
vkQueuePresent() again. Because of the bug fixed in this
commit, the required drmModeSetCrtc() to (x,y) = 0,0 is
erroneously skipped due to the stale cached connector state.
7. drmModePageflip() fails due to the wrong crtc viewport
(x,y) = 1920, 0, mismatched for the need of the Vulkan
framebuffer of (x,y) = 0,0. Kernel returns -ENOSPACE,
Swapchain goes into permanent VK_ERROR_SURFACE_LOST state.
Destroying and recreating the swapchain, as recommended
by the Vulkan spec for error handling won't help. Game over!
Resetting wsi_display_connector->active = false; fixes the
problem of wrong / stale connector state and Vulkan/wsi/display
clients are happy on multi-display setups again, as tested
in various single- and multi-display configurations.
This bug affects all Mesa releases with Vulkan/WSI/Display
support and should therefore be backported.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Fixes: 352d320a07 ("vulkan: Add EXT_direct_mode_display [v2]")
Cc: mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19484>
(cherry picked from commit 24094ee03d)
If the map doesn't set MAP_DISCARD_RANGE, we do have to copy the existing
contents over. MAP_WRITE on its only gives permission to replace the contents,
unfortunately it does not require that the application actually do so.
Closes: #7640
Fixes: 0b26a9f773 ("panfrost: Don't copy resources if replaced")
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reported-by: Roman Elshin
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19576>
(cherry picked from commit cf7a3906b0)
Don't copy propagate the constant in situations like
mov(8) g8<1>D 0x7fffffffD
mul(8) g16<1>D g8<8,8,1>D g15<16,8,2>W
On platforms that only have a 32x16 multiplier, this will result in
lowering the multiply to
mul(8) g15<1>D g14<8,8,1>D 0xffffUW
mul(8) g16<1>D g14<8,8,1>D 0x7fffUW
add(8) g15.1<2>UW g15.1<16,8,2>UW g16<16,8,2>UW
On Gfx8 and Gfx9, which have the full 32x32 multiplier, it results in
mul(8) g16<1>D g15<16,8,2>W 0x7fffffffD
Volume 2a of the Skylake PRM says:
When multiplying a DW and any lower precision integer, the
DW operand must on src0.
See also https://gitlab.freedesktop.org/mesa/crucible/-/merge_requests/104.
Previous to INTEL_shader_integer_functions2 (in Vulkan or OpenGL), I
don't think it would be possible to create a situation where this could
occur. I discovered this via some optimizations that can determine that
the non-constant source must be able to fit in 16-bits. The case listed
above came from piglit's "ext_transform_feedback-order arrays points"
with those optimizations in place.
No shader-db or fossil-db changes on any Intel platform.
Fixes: de6c0f8487 ("intel/fs: Implement support for NIR opcodes for INTEL_shader_integer_functions2")
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17718>
(cherry picked from commit db20412168)
This patch filters-out '-std=gnu++14' from the cflags obtained
from AOSP/KATI dummy target output to avoid the following building errors:
FAILED: src/gallium/drivers/r600/45f68e3@@r600@sta/sfn_sfn_assembler.cpp.o
...
clang++ ... -std=c++17 ... -std=gnu++14
...
In file included from ../src/gallium/drivers/r600/sfn/sfn_assembler.cpp:27:
In file included from ../src/gallium/drivers/r600/sfn/sfn_assembler.h:32:
In file included from ../src/gallium/drivers/r600/sfn/sfn_shader.h:31:
../src/gallium/drivers/r600/sfn/sfn_instr.h:369:56: error: no template named 'is_base_of_v' in namespace 'std'; did you mean 'is_base_of'?
template <typename T, typename = std::enable_if_t<std::is_base_of_v<Instr, T>>>
~~~~~^~~~~~~~~~~~
is_base_of
/home/utente/pie-x86_kernel/external/libcxx/include/type_traits:1412:29: note: 'is_base_of' declared here
struct _LIBCPP_TEMPLATE_VIS is_base_of
^
In file included from ../src/gallium/drivers/r600/sfn/sfn_assembler.cpp:27:
In file included from ../src/gallium/drivers/r600/sfn/sfn_assembler.h:32:
In file included from ../src/gallium/drivers/r600/sfn/sfn_shader.h:31:
../src/gallium/drivers/r600/sfn/sfn_instr.h:369:51: error: template argument for non-type template parameter must be an expression
template <typename T, typename = std::enable_if_t<std::is_base_of_v<Instr, T>>>
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/utente/pie-x86_kernel/external/libcxx/include/type_traits:439:16: note: template parameter is declared here
template <bool _Bp, class _Tp = void> using enable_if_t = typename enable_if<_Bp, _Tp>::type;
^
2 errors generated.
Cc: "22.2" "22.3" mesa-stable
Reviewed-by: Roman Stratiienko <r.stratiienko@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19563>
(cherry picked from commit fd8ec189e5)
XFB queries need to be enabled with NGG streamout and VS/TES.
Previously, the NGG lowering code relied on has_prim_query for XFB.
This fixes failures with RADV_PERFTEST=ngg_streamout on GFX10.3 with
the vkd3d-proton testsuite. Vulkan CTS is missing TES tests with XFB
queries apparently.
Cc: 22.3 mesa-stable
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19493>
(cherry picked from commit 505290dc44)
While the GC880 is HALTI0, it still uses the old set of state registers
for PE pipe configuration. This is another specialty of the GC880, readd
the missing handling for this GPU otherwise e.g. Qt5 cube example suffers
from rendering corruption with both eglfs and wayland backends.
Fixes: 7c46a48836 ("etnaviv: use new PE pipe address states on >= HALTI0")
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19562>
(cherry picked from commit 20984aab0f)
This new section didn't use the correct RST syntax, and ended up
with a broken section in the rendered docs.
Fix the syntax, and clean things up a bit to avoid overly long lines.
Fixes: be235edfe2 ("zink: add profile documentation")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19481>
(cherry picked from commit 6b3b633391)
Currently float16 to int64 conversions don't work correctly, because
the "div" variable has an infinite value, since 2^32 isn't
representable as a 16-bit float, which causes the result of of rem(x,
div) to be NaN for all inputs, leading to an incorrect result. Since
no values of magnitude greater than 2^32 are representable as a
float16 we don't actually need to do the fdiv/frem operations, the
conversion is equivalent to f2u32 with the result padded to 64 bits.
Rework:
* Jordan: Handle f16 in if/else rather than conditional
Fixes: 936c58c8fc ("nir: Extend nir_lower_int64() to support i2f/f2i lowering")
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19391>
(cherry picked from commit e14f85366e)
GDS is used for NGG queries/streamout (GFX10+ only) and the BOs were
only added to the graphics queue because compute doesn't need them.
Though, the kernel emits a GDS switch when a queue submission doesn't
use GDS. That means that submitting jobs on the compute queue without
GDS can reset the state of the graphics queue and lead to GPU hangs.
The only viable solution for now is to make the GDS BOs resident to
avoid resetting the state between queues. This shouldn't introduce
more syncs between queues because GDS BOs are similar for both.
This fixes a GPU hang with Warhammer Chaosbane during loading time and
possibly some spurious random GPU hangs. Note that this GPU hang was
workarounded on the Steam side with RADV_DEBUG=nongg.
Cc: mesa-stable
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19466>
(cherry picked from commit 26c8fedc1b)
This test as a whole does not seem to work anywhere, even lavapipe, but
one particular subtest was passing until a recent change
(!19438 - zink: polygon mode fixes?).
After consideration by @kusma, it appears that the subtest was passing
by accident due to zink generating the wrong values. Given that this is
not something that users would ever experience as a regression, we
simply document this new failure along with all the others for this
test.
Fixes: 53721827ea ("zink: correct depth-bias enable condition")
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19517>
(cherry picked from commit d7ad9e7014)
Since we now implement events in the GPU we need to be more careful
and insert barriers to honor the dependencies provided by the API
as well as ensuring we are synchronizing these with the compute
queue, since that is how we implement GPU event functionality.
Fixes: ecb01d53fd ("v3dv: refactor events")
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19458>
(cherry picked from commit e6884df088)
These leaks on device creation failure have been there before, but
were only exposed as CTS failures after the recent event refactoring.
Partially fixes:
dEQP-VK.api.device_init.create_instance_device_intentional_alloc_fail.basic
dEQP-VK.api.object_management.alloc_callback_fail.device
dEQP-VK.api.object_management.alloc_callback_fail.device_group
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Eric Engestrom <eric@igalia.com>
cc: mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19458>
(cherry picked from commit b78fd50e90)
Copied wrong from radeonsi. The registers following the scratch
buffer address are the shader rsrc1/rsrc2. Not the user SGPR0
containing the ring resource word 1.
Fixes: 278e533ec9 ("radv: update scratch buffer registers on GFX11")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19488>
(cherry picked from commit b8865ad046)
The entire point of resource shadowing is to avoid unnecessary flushing.
Flushing readers after shadowing is counterproductive. A refresher on
how resource shadowing is supposed to work:
First, we determine if it's beneficial to shadow resources. If so, we
create a new backing buffer object. We flush the current writer of the
resource, if there is one, so the current contents become known to the
CPU. If we are not discarding the original resource, we then copy the
existing contents of the buffer to the new shadow buffer on the CPU.
Finally, we swap the resource's backing buffer for our shadow. Any batch
that reads the resource will continue to read the old copy of the
resource, and any future draw calls will see the new copy with the
change implemented.
Where did we go wrong?
In 988d5aae74 ("panfrost: Flush resources when shadowing"), we started
flushing all readers. We didn't actually need to flush, we just needed
to avoid dangling references on the batches reading the old copy of the
resource. But that's easily enough avoided: just remove the references.
The batches still hold a reference to the underlying BO, which will be
freed at the right time regardless.
Originally motivated by glmark2 -bbuffer:update-method=subdata, which
has some pathological access paterns.
Firefox is a lot faster anecdotally (now scrolling at 60fps in firefox).
But what actually motivated this is an apitrace from Duckstation's GLES
renderer. With this patch, the in-game portion is improved 3fps to 21fps.
Closes: #4028
Fixes: 988d5aae74 ("panfrost: Flush resources when shadowing")
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19361>
(cherry picked from commit 2d8f28df73)
If a synchronized transfer_map is going to overwrite an entire resource,
there's no need to memcpy in the original contents ahead-of-time. This
memcpy is particularly bad for large buffers where it's copying WC->WC,
although that could be mitigated with threaded_context's cpu_storage in
the future if needed.
Prevents a performance regression in glmark2's buffer scenes from the
next patch, hence the Cc.
Cc: mesa-stable
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19361>
(cherry picked from commit 0b26a9f773)
# Bring artifacts back from the NFS dir to the build dir where gitlab-runner
# will look for them.
cp -Rp /nfs/results/. results/
if[ -f "${STRUCTURED_LOG_FILE}"];then
cp -p ${STRUCTURED_LOG_FILE} results/
echo"Structured log file is available at https://${CI_PROJECT_ROOT_NAMESPACE}.pages.freedesktop.org/-/${CI_PROJECT_NAME}/-/jobs/${CI_JOB_ID}/artifacts/results/${STRUCTURED_LOG_FILE}"
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
