Switch between memcpy implementations according to src/dest alignment.

relies over-heavily on the DRI lock to protect offsets in the
command stream from changing before being queued on the ring,
and should be viewed as being a pretty temporary mechanism
before a more robust alternative is implemented, most likely
based on a batchbuffer relocation list that will be used
to patch prebuilt batchbuffers after validation takes place.

.dir-locals.el

@@ -1,11 +0,0 @@
-((nil
-  (indent-tabs-mode . nil)
-  (tab-width . 8)
-  (c-basic-offset . 3)
-  (c-file-style . "stroustrup")
-  (fill-column . 78)
-  (eval . (progn
-	    (c-set-offset 'innamespace '0)
-	    (c-set-offset 'inline-open '0)))
-  )
- )

.gitattributes

@@ -1,4 +0,0 @@
-*.dsp -crlf
-*.dsw -crlf
-*.sln -crlf
-*.vcproj -crlf

.gitignore

@@ -1,43 +0,0 @@
-*.a
-*.dll
-*.exe
-*.ilk
-*.la
-*.lo
-*.o
-*.obj
-*.os
-*.pc
-*.pdb
-*.pyc
-*.pyo
-*.so
-*.so.*
-*.sw[a-z]
-*.tar
-*.tar.bz2
-*.tar.gz
-*.zip
-*~
-depend
-depend.bak
-bin/ltmain.sh
-lib
-lib64
-configure
-configure.lineno
-autom4te.cache
-aclocal.m4
-config.log
-config.status
-cscope*
-.scon*
-config.py
-build
-libtool
-manifest.txt
-Makefile.in
-.dir-locals.el
-.deps/
-.libs/
-/Makefile

Android.common.mk

@@ -1,65 +0,0 @@
-# Mesa 3-D graphics library
-#
-# Copyright (C) 2010-2011 Chia-I Wu <olvaffe@gmail.com>
-# Copyright (C) 2010-2011 LunarG Inc.
-#
-# Permission is hereby granted, free of charge, to any person obtaining a
-# copy of this software and associated documentation files (the "Software"),
-# to deal in the Software without restriction, including without limitation
-# the rights to use, copy, modify, merge, publish, distribute, sublicense,
-# and/or sell copies of the Software, and to permit persons to whom the
-# Software is furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included
-# in all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
-# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
-# DEALINGS IN THE SOFTWARE.
-
-# use c99 compiler by default
-ifeq ($(LOCAL_CC),)
-ifeq ($(LOCAL_IS_HOST_MODULE),true)
-LOCAL_CC := $(HOST_CC) -std=c99
-else
-LOCAL_CC := $(TARGET_CC) -std=c99
-endif
-endif
-
-LOCAL_C_INCLUDES += \
-	$(MESA_TOP)/include
-
-# define ANDROID_VERSION (e.g., 4.0.x => 0x0400)
-major := $(word 1, $(subst ., , $(PLATFORM_VERSION)))
-minor := $(word 2, $(subst ., , $(PLATFORM_VERSION)))
-LOCAL_CFLAGS += \
-	-DANDROID_VERSION=0x0$(major)0$(minor)
-
-LOCAL_CFLAGS += \
-	-DHAVE_PTHREAD=1 \
-	-fvisibility=hidden \
-	-Wno-sign-compare
-
-ifeq ($(strip $(MESA_ENABLE_ASM)),true)
-ifeq ($(TARGET_ARCH),x86)
-LOCAL_CFLAGS += \
-	-DUSE_X86_ASM \
-	-DHAVE_DLOPEN \
-
-endif
-endif
-
-LOCAL_CPPFLAGS += \
-	-Wno-error=non-virtual-dtor \
-	-Wno-non-virtual-dtor
-
-# uncomment to keep the debug symbols
-#LOCAL_STRIP_MODULE := false
-
-ifeq ($(strip $(LOCAL_MODULE_TAGS)),)
-LOCAL_MODULE_TAGS := optional
-endif

Android.mk

@@ -1,94 +0,0 @@
-# Mesa 3-D graphics library
-#
-# Copyright (C) 2010-2011 Chia-I Wu <olvaffe@gmail.com>
-# Copyright (C) 2010-2011 LunarG Inc.
-#
-# Permission is hereby granted, free of charge, to any person obtaining a
-# copy of this software and associated documentation files (the "Software"),
-# to deal in the Software without restriction, including without limitation
-# the rights to use, copy, modify, merge, publish, distribute, sublicense,
-# and/or sell copies of the Software, and to permit persons to whom the
-# Software is furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included
-# in all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
-# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
-# DEALINGS IN THE SOFTWARE.
-
-# BOARD_GPU_DRIVERS should be defined.  The valid values are
-#
-#   classic drivers: i915 i965
-#   gallium drivers: swrast i915g nouveau r300g r600g radeonsi vmwgfx
-#
-# The main target is libGLES_mesa.  For each classic driver enabled, a DRI
-# module will also be built.  DRI modules will be loaded by libGLES_mesa.
-
-MESA_TOP := $(call my-dir)
-MESA_COMMON_MK := $(MESA_TOP)/Android.common.mk
-MESA_PYTHON2 := python
-
-DRM_TOP := external/drm
-DRM_GRALLOC_TOP := hardware/drm_gralloc
-
-classic_drivers := i915 i965
-gallium_drivers := swrast i915g nouveau r300g r600g radeonsi vmwgfx
-
-MESA_GPU_DRIVERS := $(strip $(BOARD_GPU_DRIVERS))
-
-# warn about invalid drivers
-invalid_drivers := $(filter-out \
-	$(classic_drivers) $(gallium_drivers), $(MESA_GPU_DRIVERS))
-ifneq ($(invalid_drivers),)
-$(warning invalid GPU drivers: $(invalid_drivers))
-# tidy up
-MESA_GPU_DRIVERS := $(filter-out $(invalid_drivers), $(MESA_GPU_DRIVERS))
-endif
-
-# host and target must be the same arch to generate matypes.h
-ifeq ($(TARGET_ARCH),$(HOST_ARCH))
-MESA_ENABLE_ASM := true
-else
-MESA_ENABLE_ASM := false
-endif
-
-ifneq ($(filter $(classic_drivers), $(MESA_GPU_DRIVERS)),)
-MESA_BUILD_CLASSIC := true
-else
-MESA_BUILD_CLASSIC := false
-endif
-
-ifneq ($(filter $(gallium_drivers), $(MESA_GPU_DRIVERS)),)
-MESA_BUILD_GALLIUM := true
-else
-MESA_BUILD_GALLIUM := false
-endif
-
-# add subdirectories
-ifneq ($(strip $(MESA_GPU_DRIVERS)),)
-
-SUBDIRS := \
-	src/mapi \
-	src/glsl \
-	src/mesa \
-	src/egl/main
-
-ifeq ($(strip $(MESA_BUILD_CLASSIC)),true)
-SUBDIRS += \
-	src/egl/drivers/dri2 \
-	src/mesa/drivers/dri
-endif
-
-ifeq ($(strip $(MESA_BUILD_GALLIUM)),true)
-SUBDIRS += src/gallium
-endif
-
-mkfiles := $(patsubst %,$(MESA_TOP)/%/Android.mk,$(SUBDIRS))
-include $(mkfiles)
-
-endif

Makefile

@@ -0,0 +1,451 @@
+# Top-level Mesa makefile
+
+TOP = .
+
+SUBDIRS = src progs
+
+
+default: $(TOP)/configs/current
+	@for dir in $(SUBDIRS) ; do \
+		(cd $$dir ; $(MAKE)) || exit 1 ; \
+	done
+
+
+doxygen:
+	(cd doxygen ; make) ; \
+
+clean:
+	@for dir in $(SUBDIRS) ; do \
+		(cd $$dir ; $(MAKE) clean) ; \
+	done
+
+
+realclean:
+	touch $(TOP)/configs/current
+	$(MAKE) clean
+	-rm -rf lib*
+	-rm -f $(TOP)/configs/current
+	-rm -f `find . -name \*.o`
+	-rm -f `find . -name \*.a`
+	-rm -f `find . -name \*.so`
+	-rm -f `find . -name depend`
+
+
+
+install:
+	@echo "Installing"
+	$(TOP)/bin/installmesa $(DESTDIR)
+
+# DirectFBGL module installation
+linux-directfb-install:
+	cd src/mesa/drivers/directfb && $(MAKE) install
+
+# If there's no current configuration file
+$(TOP)/configs/current:
+	@echo
+	@echo
+	@echo "Please choose a configuration from the following list:"
+	@ls -1 $(TOP)/configs | grep -v "current\|default\|CVS"
+	@echo
+	@echo "Then type 'make <config>' (ex: 'make linux-x86')"
+	@echo "(ignore the following error message)"
+	@exit 1
+
+
+# Rules to set/install a specific build configuration
+aix \
+aix-64 \
+aix-gcc \
+aix-static \
+beos \
+darwin \
+darwin-static \
+freebsd \
+freebsd-dri \
+freebsd-dri-amd64 \
+freebsd-dri-x86 \
+hpux10 \
+hpux10-gcc \
+hpux10-static \
+hpux11-32 \
+hpux11-32-static \
+hpux11-32-static-nothreads \
+hpux11-64 \
+hpux11-64-static \
+hpux9 \
+hpux9-gcc \
+irix6-64 \
+irix6-64-static \
+irix6-n32 \
+irix6-n32-static \
+irix6-o32 \
+irix6-o32-static \
+linux \
+linux-alpha \
+linux-alpha-static \
+linux-debug \
+linux-directfb \
+linux-dri \
+linux-dri-x86 \
+linux-dri-x86-64 \
+linux-dri-ppc \
+linux-indirect \
+linux-fbdev \
+linux-glide \
+linux-icc \
+linux-icc-static \
+linux-osmesa16 \
+linux-osmesa16-static \
+linux-osmesa32 \
+linux-ppc \
+linux-ppc-static \
+linux-solo \
+linux-solo-x86 \
+linux-solo-ia64 \
+linux-sparc \
+linux-sparc5 \
+linux-static \
+linux-ultrasparc \
+linux-tcc \
+linux-x86 \
+linux-x86-debug \
+linux-x86-32 \
+linux-x86-64 \
+linux-x86-64-debug \
+linux-x86-64-static \
+linux-x86-xcb \
+linux-x86-glide \
+linux-x86-static \
+netbsd \
+openbsd \
+osf1 \
+solaris-x86 \
+solaris-x86-gcc \
+sunos4 \
+sunos4-gcc \
+sunos4-static \
+sunos5 \
+sunos5-gcc \
+sunos5-smp \
+ultrix-gcc:
+	(cd configs && rm -f current && ln -s $@ current)
+	$(MAKE) default
+
+
+# Rules for making release tarballs
+
+DIRECTORY = Mesa-6.5
+LIB_NAME = MesaLib-6.5
+DEMO_NAME = MesaDemos-6.5
+GLUT_NAME = MesaGLUT-6.5
+
+MAIN_FILES = \
+	$(DIRECTORY)/Makefile*						\
+	$(DIRECTORY)/descrip.mms					\
+	$(DIRECTORY)/mms-config.					\
+	$(DIRECTORY)/bin/mklib						\
+	$(DIRECTORY)/bin/installmesa					\
+	$(DIRECTORY)/configs/[a-z]*					\
+	$(DIRECTORY)/docs/*.html					\
+	$(DIRECTORY)/docs/COPYING					\
+	$(DIRECTORY)/docs/README.*					\
+	$(DIRECTORY)/docs/RELNOTES*					\
+	$(DIRECTORY)/docs/VERSIONS					\
+	$(DIRECTORY)/docs/*.spec					\
+	$(DIRECTORY)/include/GL/internal/glcore.h			\
+	$(DIRECTORY)/include/GL/amesa.h					\
+	$(DIRECTORY)/include/GL/dmesa.h					\
+	$(DIRECTORY)/include/GL/directfbgl.h				\
+	$(DIRECTORY)/include/GL/fxmesa.h				\
+	$(DIRECTORY)/include/GL/ggimesa.h				\
+	$(DIRECTORY)/include/GL/gl.h					\
+	$(DIRECTORY)/include/GL/glext.h					\
+	$(DIRECTORY)/include/GL/gl_mangle.h				\
+	$(DIRECTORY)/include/GL/glu.h					\
+	$(DIRECTORY)/include/GL/glu_mangle.h				\
+	$(DIRECTORY)/include/GL/glx.h					\
+	$(DIRECTORY)/include/GL/glxext.h				\
+	$(DIRECTORY)/include/GL/glx_mangle.h				\
+	$(DIRECTORY)/include/GL/mesa_wgl.h				\
+	$(DIRECTORY)/include/GL/mglmesa.h				\
+	$(DIRECTORY)/include/GL/osmesa.h				\
+	$(DIRECTORY)/include/GL/svgamesa.h				\
+	$(DIRECTORY)/include/GL/ugl*.h					\
+	$(DIRECTORY)/include/GL/vms_x_fix.h				\
+	$(DIRECTORY)/include/GL/wmesa.h					\
+	$(DIRECTORY)/include/GL/xmesa.h					\
+	$(DIRECTORY)/include/GL/xmesa_x.h				\
+	$(DIRECTORY)/include/GL/xmesa_xf86.h				\
+	$(DIRECTORY)/include/GLView.h					\
+	$(DIRECTORY)/src/Makefile					\
+	$(DIRECTORY)/src/descrip.mms					\
+	$(DIRECTORY)/src/mesa/Makefile*					\
+	$(DIRECTORY)/src/mesa/sources					\
+	$(DIRECTORY)/src/mesa/descrip.mms				\
+	$(DIRECTORY)/src/mesa/depend					\
+	$(DIRECTORY)/src/mesa/main/*.[chS]				\
+	$(DIRECTORY)/src/mesa/main/descrip.mms				\
+	$(DIRECTORY)/src/mesa/glapi/*.[chS]				\
+	$(DIRECTORY)/src/mesa/glapi/descrip.mms				\
+	$(DIRECTORY)/src/mesa/array_cache/*.[ch]			\
+	$(DIRECTORY)/src/mesa/array_cache/descrip.mms			\
+	$(DIRECTORY)/src/mesa/math/*.[ch]				\
+	$(DIRECTORY)/src/mesa/math/descrip.mms				\
+	$(DIRECTORY)/src/mesa/shader/*.[ch]				\
+	$(DIRECTORY)/src/mesa/shader/descrip.mms			\
+	$(DIRECTORY)/src/mesa/shader/grammar/*.[ch]			\
+	$(DIRECTORY)/src/mesa/shader/grammar/descrip.mms		\
+	$(DIRECTORY)/src/mesa/shader/slang/*.[ch]			\
+	$(DIRECTORY)/src/mesa/shader/slang/descrip.mms			\
+	$(DIRECTORY)/src/mesa/shader/slang/library/*.[ch]		\
+	$(DIRECTORY)/src/mesa/swrast/*.[ch]				\
+	$(DIRECTORY)/src/mesa/swrast/descrip.mms			\
+	$(DIRECTORY)/src/mesa/swrast_setup/*.[ch]			\
+	$(DIRECTORY)/src/mesa/swrast_setup/descrip.mms			\
+	$(DIRECTORY)/src/mesa/tnl/*.[chS]				\
+	$(DIRECTORY)/src/mesa/tnl/descrip.mms				\
+	$(DIRECTORY)/src/mesa/tnl_dd/*.[ch]				\
+	$(DIRECTORY)/src/mesa/tnl_dd/imm/*.[ch]				\
+	$(DIRECTORY)/src/mesa/tnl_dd/imm/NOTES.imm			\
+	$(DIRECTORY)/src/mesa/drivers/beos/*.cpp			\
+	$(DIRECTORY)/src/mesa/drivers/beos/Makefile			\
+	$(DIRECTORY)/src/mesa/drivers/common/*.[ch]			\
+	$(DIRECTORY)/src/mesa/drivers/common/descrip.mms		\
+	$(DIRECTORY)/src/mesa/drivers/directfb/*.[ch]			\
+	$(DIRECTORY)/src/mesa/drivers/directfb/Makefile			\
+	$(DIRECTORY)/src/mesa/drivers/dos/*.[chS]			\
+	$(DIRECTORY)/src/mesa/drivers/fbdev/glfbdev.c			\
+	$(DIRECTORY)/src/mesa/drivers/glide/*.[ch]			\
+	$(DIRECTORY)/src/mesa/drivers/ggi/*.[ch]			\
+	$(DIRECTORY)/src/mesa/drivers/ggi/ggimesa.conf.in		\
+	$(DIRECTORY)/src/mesa/drivers/ggi/default/*.c			\
+	$(DIRECTORY)/src/mesa/drivers/ggi/default/genkgi.conf.in	\
+	$(DIRECTORY)/src/mesa/drivers/ggi/display/*.c			\
+	$(DIRECTORY)/src/mesa/drivers/ggi/display/fbdev.conf.in		\
+	$(DIRECTORY)/src/mesa/drivers/ggi/include/ggi/mesa/*.h		\
+	$(DIRECTORY)/src/mesa/drivers/osmesa/Makefile.win		\
+	$(DIRECTORY)/src/mesa/drivers/osmesa/descrip.mms		\
+	$(DIRECTORY)/src/mesa/drivers/osmesa/osmesa.def			\
+	$(DIRECTORY)/src/mesa/drivers/osmesa/*.[ch]			\
+	$(DIRECTORY)/src/mesa/drivers/svga/*.[ch]			\
+	$(DIRECTORY)/src/mesa/drivers/windows/*/*.[ch]			\
+	$(DIRECTORY)/src/mesa/drivers/windows/*/*.def			\
+	$(DIRECTORY)/src/mesa/drivers/x11/descrip.mms			\
+	$(DIRECTORY)/src/mesa/drivers/x11/*.[ch]			\
+	$(DIRECTORY)/src/mesa/ppc/*.[ch]				\
+	$(DIRECTORY)/src/mesa/sparc/*.[chS]				\
+	$(DIRECTORY)/src/mesa/x86/Makefile				\
+	$(DIRECTORY)/src/mesa/x86/*.[ch]				\
+	$(DIRECTORY)/src/mesa/x86/*.S					\
+	$(DIRECTORY)/src/mesa/x86/rtasm/*.[ch]				\
+	$(DIRECTORY)/src/mesa/x86-64/*.[chS]				\
+	$(DIRECTORY)/src/mesa/x86-64/Makefile				\
+	$(DIRECTORY)/progs/Makefile					\
+	$(DIRECTORY)/progs/util/README					\
+	$(DIRECTORY)/progs/util/*.[ch]					\
+	$(DIRECTORY)/progs/util/sampleMakefile				\
+	$(DIRECTORY)/vms/analyze_map.com				\
+	$(DIRECTORY)/vms/xlib.opt					\
+	$(DIRECTORY)/vms/xlib_share.opt					\
+	$(DIRECTORY)/windows/VC6/mesa/gdi/gdi.dsp			\
+	$(DIRECTORY)/windows/VC6/mesa/glu/*.txt				\
+	$(DIRECTORY)/windows/VC6/mesa/glu/glu.dsp			\
+	$(DIRECTORY)/windows/VC6/mesa/mesa.dsw				\
+	$(DIRECTORY)/windows/VC6/mesa/mesa/mesa.dsp			\
+	$(DIRECTORY)/windows/VC6/mesa/osmesa/osmesa.dsp			\
+	$(DIRECTORY)/windows/VC7/mesa/gdi/gdi.vcproj			\
+	$(DIRECTORY)/windows/VC7/mesa/glu/glu.vcproj			\
+	$(DIRECTORY)/windows/VC7/mesa/mesa.sln				\
+	$(DIRECTORY)/windows/VC7/mesa/mesa/mesa.vcproj			\
+	$(DIRECTORY)/windows/VC7/mesa/osmesa/osmesa.vcproj
+
+DRI_FILES = \
+	$(DIRECTORY)/include/GL/internal/dri_interface.h		\
+	$(DIRECTORY)/include/GL/internal/sarea.h			\
+	$(DIRECTORY)/src/glx/Makefile					\
+	$(DIRECTORY)/src/glx/x11/Makefile				\
+	$(DIRECTORY)/src/glx/x11/*.[ch]					\
+	$(DIRECTORY)/src/mesa/drivers/dri/Makefile			\
+	$(DIRECTORY)/src/mesa/drivers/dri/Makefile.template		\
+	$(DIRECTORY)/src/mesa/drivers/dri/common/xmlpool/*.[ch]		\
+	$(DIRECTORY)/src/mesa/drivers/dri/common/xmlpool/*.po		\
+	$(DIRECTORY)/src/mesa/drivers/dri/*/*.[chS]			\
+	$(DIRECTORY)/src/mesa/drivers/dri/*/Makefile			\
+	$(DIRECTORY)/src/mesa/drivers/dri/*/Doxyfile			\
+	$(DIRECTORY)/src/mesa/drivers/dri/*/server/*.[ch]
+
+SGI_GLU_FILES = \
+	$(DIRECTORY)/src/glu/Makefile					\
+	$(DIRECTORY)/src/glu/descrip.mms				\
+	$(DIRECTORY)/src/glu/sgi/Makefile				\
+	$(DIRECTORY)/src/glu/sgi/Makefile.win				\
+	$(DIRECTORY)/src/glu/sgi/Makefile.DJ				\
+	$(DIRECTORY)/src/glu/sgi/glu.def				\
+	$(DIRECTORY)/src/glu/sgi/dummy.cc				\
+	$(DIRECTORY)/src/glu/sgi/descrip.mms				\
+	$(DIRECTORY)/src/glu/sgi/mesaglu.opt				\
+	$(DIRECTORY)/src/glu/sgi/include/gluos.h			\
+	$(DIRECTORY)/src/glu/sgi/libnurbs/interface/*.h			\
+	$(DIRECTORY)/src/glu/sgi/libnurbs/interface/*.cc		\
+	$(DIRECTORY)/src/glu/sgi/libnurbs/internals/*.h			\
+	$(DIRECTORY)/src/glu/sgi/libnurbs/internals/*.cc		\
+	$(DIRECTORY)/src/glu/sgi/libnurbs/nurbtess/*.h			\
+	$(DIRECTORY)/src/glu/sgi/libnurbs/nurbtess/*.cc			\
+	$(DIRECTORY)/src/glu/sgi/libtess/README				\
+	$(DIRECTORY)/src/glu/sgi/libtess/alg-outline			\
+	$(DIRECTORY)/src/glu/sgi/libtess/*.[ch]				\
+	$(DIRECTORY)/src/glu/sgi/libutil/*.[ch]
+
+MESA_GLU_FILES = \
+	$(DIRECTORY)/src/glu/mesa/README[12]		\
+	$(DIRECTORY)/src/glu/mesa/Makefile*		\
+	$(DIRECTORY)/src/glu/mesa/descrip.mms		\
+	$(DIRECTORY)/src/glu/mesa/mms_depend		\
+	$(DIRECTORY)/src/glu/mesa/*.def			\
+	$(DIRECTORY)/src/glu/mesa/depend		\
+	$(DIRECTORY)/src/glu/mesa/*.[ch]
+
+GLW_FILES = \
+	$(DIRECTORY)/src/glw/*.[ch]			\
+	$(DIRECTORY)/src/glw/Makefile*			\
+	$(DIRECTORY)/src/glw/README			\
+	$(DIRECTORY)/src/glw/depend
+
+DEMO_FILES = \
+	$(DIRECTORY)/progs/beos/*.cpp			\
+	$(DIRECTORY)/progs/beos/Makefile		\
+	$(DIRECTORY)/progs/images/*.rgb			\
+	$(DIRECTORY)/progs/images/*.rgba		\
+	$(DIRECTORY)/progs/demos/Makefile*		\
+	$(DIRECTORY)/progs/demos/descrip.mms		\
+	$(DIRECTORY)/progs/demos/*.[ch]			\
+	$(DIRECTORY)/progs/demos/*.cxx			\
+	$(DIRECTORY)/progs/demos/*.dat			\
+	$(DIRECTORY)/progs/demos/README			\
+	$(DIRECTORY)/progs/osdemos/Makefile		\
+	$(DIRECTORY)/progs/osdemos/*.c			\
+	$(DIRECTORY)/progs/xdemos/Makefile*		\
+	$(DIRECTORY)/progs/xdemos/descrip.mms		\
+	$(DIRECTORY)/progs/xdemos/*.[chf]		\
+	$(DIRECTORY)/progs/redbook/Makefile*		\
+	$(DIRECTORY)/progs/redbook/README		\
+	$(DIRECTORY)/progs/redbook/*.[ch]		\
+	$(DIRECTORY)/progs/samples/Makefile*		\
+	$(DIRECTORY)/progs/samples/README		\
+	$(DIRECTORY)/progs/samples/*.c			\
+	$(DIRECTORY)/progs/windml/Makefile.ugl		\
+	$(DIRECTORY)/progs/windml/*.c			\
+	$(DIRECTORY)/progs/windml/*.bmp			\
+	$(DIRECTORY)/progs/ggi/*.c			\
+	$(DIRECTORY)/windows/VC6/progs/demos/*.dsp	\
+	$(DIRECTORY)/windows/VC6/progs/progs.dsw	\
+	$(DIRECTORY)/windows/VC7/progs/demos/*.vcproj	\
+	$(DIRECTORY)/windows/VC7/progs/progs.sln
+
+GLUT_FILES = \
+	$(DIRECTORY)/include/GL/glut.h			\
+	$(DIRECTORY)/include/GL/glutf90.h		\
+	$(DIRECTORY)/src/glut/glx/Makefile*		\
+	$(DIRECTORY)/src/glut/glx/depend		\
+	$(DIRECTORY)/src/glut/glx/*def			\
+	$(DIRECTORY)/src/glut/glx/descrip.mms		\
+	$(DIRECTORY)/src/glut/glx/mms_depend		\
+	$(DIRECTORY)/src/glut/glx/*.[ch]		\
+	$(DIRECTORY)/src/glut/beos/*.[ch]		\
+	$(DIRECTORY)/src/glut/beos/*.cpp		\
+	$(DIRECTORY)/src/glut/beos/Makefile		\
+	$(DIRECTORY)/src/glut/dos/*.[ch]		\
+	$(DIRECTORY)/src/glut/dos/Makefile.DJ		\
+	$(DIRECTORY)/src/glut/dos/PC_HW/*.[chS]		\
+	$(DIRECTORY)/src/glut/ggi/*.[ch]		\
+	$(DIRECTORY)/src/glut/ggi/Makefile		\
+	$(DIRECTORY)/windows/VC6/progs/glut/glut.dsp	\
+	$(DIRECTORY)/windows/VC7/progs/glut/glut.vcproj
+
+DEPEND_FILES = \
+	$(TOP)/src/mesa/depend		\
+	$(TOP)/src/glw/depend		\
+	$(TOP)/src/glut/glx/depend	\
+	$(TOP)/src/glu/sgi/depend
+
+
+LIB_FILES = $(MAIN_FILES) $(DRI_FILES) $(SGI_GLU_FILES) $(GLW_FILES)
+
+
+# Everything for new a Mesa release:
+tarballs: rm_depend lib_gz demo_gz glut_gz lib_bz2 demo_bz2 glut_bz2 lib_zip demo_zip glut_zip md5
+
+
+rm_depend:
+	@for dep in $(DEPEND_FILES) ; do \
+		rm -f $$dep ; \
+		touch $$dep ; \
+	done
+
+lib_gz:
+	rm -f configs/current ; \
+	cd .. ; \
+	tar -cf $(LIB_NAME).tar $(LIB_FILES) ; \
+	gzip $(LIB_NAME).tar ; \
+	mv $(LIB_NAME).tar.gz $(DIRECTORY)
+
+demo_gz:
+	cd .. ; \
+	tar -cf $(DEMO_NAME).tar $(DEMO_FILES) ; \
+	gzip $(DEMO_NAME).tar ; \
+	mv $(DEMO_NAME).tar.gz $(DIRECTORY)
+
+glut_gz:
+	cd .. ; \
+	tar -cf $(GLUT_NAME).tar $(GLUT_FILES) ; \
+	gzip $(GLUT_NAME).tar ; \
+	mv $(GLUT_NAME).tar.gz $(DIRECTORY)
+
+lib_bz2:
+	rm -f configs/current ; \
+	cd .. ; \
+	tar -cf $(LIB_NAME).tar $(LIB_FILES) ; \
+	bzip2 $(LIB_NAME).tar ; \
+	mv $(LIB_NAME).tar.bz2 $(DIRECTORY)
+
+demo_bz2:
+	cd .. ; \
+	tar -cf $(DEMO_NAME).tar $(DEMO_FILES) ; \
+	bzip2 $(DEMO_NAME).tar ; \
+	mv $(DEMO_NAME).tar.bz2 $(DIRECTORY)
+
+glut_bz2:
+	cd .. ; \
+	tar -cf $(GLUT_NAME).tar $(GLUT_FILES) ; \
+	bzip2 $(GLUT_NAME).tar ; \
+	mv $(GLUT_NAME).tar.bz2 $(DIRECTORY)
+
+lib_zip:
+	rm -f configs/current ; \
+	rm -f $(LIB_NAME).zip ; \
+	cd .. ; \
+	zip -qr $(LIB_NAME).zip $(LIB_FILES) ; \
+	mv $(LIB_NAME).zip $(DIRECTORY)
+
+demo_zip:
+	rm -f $(DEMO_NAME).zip ; \
+	cd .. ; \
+	zip -qr $(DEMO_NAME).zip $(DEMO_FILES) ; \
+	mv $(DEMO_NAME).zip $(DIRECTORY)
+
+glut_zip:
+	rm -f $(GLUT_NAME).zip ; \
+	cd .. ; \
+	zip -qr $(GLUT_NAME).zip $(GLUT_FILES) ; \
+	mv $(GLUT_NAME).zip $(DIRECTORY)
+
+md5:
+	@-md5sum $(LIB_NAME).tar.gz
+	@-md5sum $(LIB_NAME).tar.bz2
+	@-md5sum $(LIB_NAME).zip
+	@-md5sum $(DEMO_NAME).tar.gz
+	@-md5sum $(DEMO_NAME).tar.bz2
+	@-md5sum $(DEMO_NAME).zip
+	@-md5sum $(GLUT_NAME).tar.gz
+	@-md5sum $(GLUT_NAME).tar.bz2
+	@-md5sum $(GLUT_NAME).zip

Makefile.DJ

@@ -0,0 +1,93 @@
+# Mesa 3-D graphics library
+# Version:  4.0
+# 
+# Copyright (C) 1999  Brian Paul   All Rights Reserved.
+# 
+# Permission is hereby granted, free of charge, to any person obtaining a
+# copy of this software and associated documentation files (the "Software"),
+# to deal in the Software without restriction, including without limitation
+# the rights to use, copy, modify, merge, publish, distribute, sublicense,
+# and/or sell copies of the Software, and to permit persons to whom the
+# Software is furnished to do so, subject to the following conditions:
+# 
+# The above copyright notice and this permission notice shall be included
+# in all copies or substantial portions of the Software.
+# 
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+# BRIAN PAUL BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+# DOS/DJGPP makefile v1.6 for Mesa
+#
+#  Copyright (C) 2002 - Daniel Borca
+#  Email : dborca@users.sourceforge.net
+#  Web   : http://www.geocities.com/dborca
+
+
+#
+#  Available options:
+#
+#    Environment variables:
+#	GLU=[mesa|sgi]	specify GLU directory; can be `sgi' (requires GNU/C++)
+#			or `mesa'.
+#			default = mesa
+#	GLIDE		path to Glide3 SDK; used with FX.
+#			default = $(TOP)/glide3
+#	FX=1		build for 3dfx Glide3. Note that this disables
+#			compilation of most DMesa code and requires fxMesa.
+#			As a consequence, you'll need the DJGPP Glide3
+#			library to build any application.
+#			default = no
+#	X86=1		optimize for x86 (if possible, use MMX, SSE, 3DNow).
+#			default = no
+#
+#    Targets:
+#	all:		build everything
+#	libgl:		build GL
+#	libglu:		build GLU
+#	libglut:	build GLUT
+#	clean:		remove object files
+#	realclean:	remove all generated files
+#
+
+
+
+.PHONY : all libgl libglu libglut clean realclean
+
+GLU ?= mesa
+
+CFLAGS = -Wall -W -pedantic
+CFLAGS += -O2 -ffast-math
+
+export CFLAGS
+
+ifeq ($(wildcard $(addsuffix /rm.exe,$(subst ;, ,$(PATH)))),)
+UNLINK = del $(subst /,\,$(1))
+else
+UNLINK = $(RM) $(1)
+endif
+
+all: libgl libglu libglut
+
+libgl: lib
+	$(MAKE) -f Makefile.DJ -C src/mesa
+libglu: lib
+	$(MAKE) -f Makefile.DJ -C src/glu/$(GLU)
+libglut: lib
+	$(MAKE) -f Makefile.DJ -C src/glut/dos
+
+lib:
+	mkdir lib
+
+clean:
+	$(MAKE) -f Makefile.DJ clean -C src/mesa
+	$(MAKE) -f Makefile.DJ clean -C src/glu/mesa
+	$(MAKE) -f Makefile.DJ clean -C src/glu/sgi
+	$(MAKE) -f Makefile.DJ clean -C src/glut/dos
+
+realclean: clean
+	-$(call UNLINK,lib/*.a)
+	-$(call UNLINK,lib/*.dxe)

Makefile.am

@@ -1,128 +0,0 @@
-# Copyright © 2012 Intel Corporation
-#
-# Permission is hereby granted, free of charge, to any person obtaining a
-# copy of this software and associated documentation files (the "Software"),
-# to deal in the Software without restriction, including without limitation
-# the rights to use, copy, modify, merge, publish, distribute, sublicense,
-# and/or sell copies of the Software, and to permit persons to whom the
-# Software is furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice (including the next
-# paragraph) shall be included in all copies or substantial portions of the
-# Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
-# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
-# IN THE SOFTWARE.
-
-SUBDIRS = src
-
-ACLOCAL_AMFLAGS = -I m4
-
-doxygen:
-	cd doxygen && $(MAKE)
-
-check-local:
-	$(MAKE) -C src/mapi/glapi/tests check
-	$(MAKE) -C src/mapi/shared-glapi/tests check
-	$(MAKE) -C src/mesa/main/tests check
-	$(MAKE) -C src/glsl/tests check
-	$(MAKE) -C src/glx/tests check
-
-clean-local:
-	-@touch $(top_builddir)/configs/current
-	-@for dir in $(SUBDIRS) ; do \
-		if [ -d $$dir ] ; then \
-			(cd $$dir && $(MAKE) clean) ; \
-		fi \
-	done
-	-@test -s $(top_builddir)/configs/current || rm -f $(top_builddir)/configs/current
-
-
-
-distclean-local:
-	-rm -rf lib*
-	-rm -f $(top_builddir)/configs/current
-	-find . '(' -name '*.o' -o -name '*.a' -o -name '*.so' -o \
-	  -name depend -o -name depend.bak ')' -exec rm -f '{}' ';'
-
-.PHONY: doxygen
-
-# Rules for making release tarballs
-
-PACKAGE_VERSION=9.0
-PACKAGE_DIR = Mesa-$(PACKAGE_VERSION)
-PACKAGE_NAME = MesaLib-$(PACKAGE_VERSION)
-
-EXTRA_FILES = \
-	aclocal.m4					\
-	configure					\
-	bin/install-sh					\
-	src/glsl/glsl_parser.cc				\
-	src/glsl/glsl_parser.h				\
-	src/glsl/glsl_lexer.cc				\
-	src/glsl/glcpp/glcpp-lex.c			\
-	src/glsl/glcpp/glcpp-parse.c			\
-	src/glsl/glcpp/glcpp-parse.h			\
-	src/mesa/main/api_exec_es1.c			\
-	src/mesa/main/api_exec_es1_dispatch.h		\
-	src/mesa/main/api_exec_es1_remap_helper.h	\
-	src/mesa/main/api_exec_es2.c			\
-	src/mesa/main/api_exec_es2_dispatch.h		\
-	src/mesa/main/api_exec_es2_remap_helper.h	\
-	src/mesa/program/lex.yy.c			\
-	src/mesa/program/program_parse.tab.c		\
-	src/mesa/program/program_parse.tab.h
-
-IGNORE_FILES = \
-	-x autogen.sh
-
-
-parsers: configure
-	-@touch $(top_builddir)/configs/current
-	$(MAKE) -C src/glsl glsl_parser.cc glsl_parser.h glsl_lexer.cc
-	$(MAKE) -C src/glsl/glcpp glcpp-lex.c glcpp-parse.c glcpp-parse.h
-	$(MAKE) -C src/mesa program/lex.yy.c program/program_parse.tab.c program/program_parse.tab.h
-
-# Everything for new a Mesa release:
-ARCHIVES = $(PACKAGE_NAME).tar.gz \
-	$(PACKAGE_NAME).tar.bz2 \
-	$(PACKAGE_NAME).zip
-
-tarballs: md5
-	rm -f ../$(PACKAGE_DIR) $(PACKAGE_NAME).tar
-
-manifest.txt: .git
-	( \
-		ls -1 $(EXTRA_FILES) ; \
-		git ls-files $(IGNORE_FILES) \
-	) | sed -e '/^\(.*\/\)\?\./d' -e "s@^@$(PACKAGE_DIR)/@" > $@
-
-../$(PACKAGE_DIR):
-	ln -s $(PWD) $@
-
-$(PACKAGE_NAME).tar: parsers ../$(PACKAGE_DIR) manifest.txt
-	cd .. ; tar -cf $(PACKAGE_DIR)/$(PACKAGE_NAME).tar -T $(PACKAGE_DIR)/manifest.txt
-
-$(PACKAGE_NAME).tar.gz: $(PACKAGE_NAME).tar ../$(PACKAGE_DIR)
-	gzip --stdout --best $(PACKAGE_NAME).tar > $(PACKAGE_NAME).tar.gz
-
-$(PACKAGE_NAME).tar.bz2: $(PACKAGE_NAME).tar
-	bzip2 --stdout --best $(PACKAGE_NAME).tar > $(PACKAGE_NAME).tar.bz2
-
-$(PACKAGE_NAME).zip: parsers ../$(PACKAGE_DIR) manifest.txt
-	rm -f $(PACKAGE_NAME).zip ; \
-	cd .. ; \
-	zip -q -@ $(PACKAGE_NAME).zip < $(PACKAGE_DIR)/manifest.txt ; \
-	mv $(PACKAGE_NAME).zip $(PACKAGE_DIR)
-
-md5: $(ARCHIVES)
-	@-md5sum $(PACKAGE_NAME).tar.gz
-	@-md5sum $(PACKAGE_NAME).tar.bz2
-	@-md5sum $(PACKAGE_NAME).zip
-
-.PHONY: tarballs md5

Makefile.mgw

@@ -0,0 +1,88 @@
+# Mesa 3-D graphics library
+# Version:  4.0
+# 
+# Copyright (C) 1999  Brian Paul   All Rights Reserved.
+# 
+# Permission is hereby granted, free of charge, to any person obtaining a
+# copy of this software and associated documentation files (the "Software"),
+# to deal in the Software without restriction, including without limitation
+# the rights to use, copy, modify, merge, publish, distribute, sublicense,
+# and/or sell copies of the Software, and to permit persons to whom the
+# Software is furnished to do so, subject to the following conditions:
+# 
+# The above copyright notice and this permission notice shall be included
+# in all copies or substantial portions of the Software.
+# 
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+# BRIAN PAUL BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+# MinGW makefile v1.2 for Mesa
+#
+#  Copyright (C) 2002 - Daniel Borca
+#  Email : dborca@users.sourceforge.net
+#  Web   : http://www.geocities.com/dborca
+
+
+#
+#  Available options:
+#
+#    Environment variables:
+#	GLIDE		path to Glide3 SDK; used with FX.
+#			default = $(TOP)/glide3
+#	FX=1		build for 3dfx Glide3. Note that this disables
+#			compilation of most WMesa code and requires fxMesa.
+#			As a consequence, you'll need the Win32 Glide3
+#			library to build any application.
+#			default = no
+#	ICD=1		build the installable client driver interface
+#			(windows opengl driver interface)
+#			default = no
+#	X86=1		optimize for x86 (if possible, use MMX, SSE, 3DNow).
+#			default = no
+#
+#    Targets:
+#	all:		build everything
+#	libgl:		build GL
+#	clean:		remove object files
+#	realclean:	remove all generated files
+#
+
+
+
+.PHONY : all libgl clean realclean
+
+ifeq ($(ICD),1)
+  # when -std=c99 mingw will not define WIN32
+  CFLAGS = -Wall -W -Werror
+else
+  # I love c89
+  CFLAGS = -Wall -W -pedantic
+endif
+CFLAGS += -O2 -ffast-math
+
+export CFLAGS
+
+ifeq ($(wildcard $(addsuffix /rm.exe,$(subst ;, ,$(PATH)))),)
+UNLINK = del $(subst /,\,$(1))
+else
+UNLINK = $(RM) $(1)
+endif
+
+all: libgl
+
+libgl: lib
+	$(MAKE) -f Makefile.mgw -C src/mesa
+
+lib:
+	mkdir lib
+
+clean:
+	$(MAKE) -f Makefile.mgw clean -C src/mesa
+
+realclean: clean
+	-$(call UNLINK,lib/*.a)
+	-$(call UNLINK,lib/*.dll)

SConstruct

@@ -1,161 +0,0 @@
-#######################################################################
-# Top-level SConstruct
-#
-# For example, invoke scons as 
-#
-#   scons build=debug llvm=yes machine=x86
-#
-# to set configuration variables. Or you can write those options to a file
-# named config.py:
-#
-#   # config.py
-#   build='debug'
-#   llvm=True
-#   machine='x86'
-# 
-# Invoke
-#
-#   scons -h
-#
-# to get the full list of options. See scons manpage for more info.
-#  
-
-import os
-import os.path
-import sys
-import SCons.Util
-
-import common
-
-#######################################################################
-# Configuration options
-
-opts = Variables('config.py')
-common.AddOptions(opts)
-
-env = Environment(
-	options = opts,
-	tools = ['gallium'],
-	toolpath = ['#scons'],	
-	ENV = os.environ,
-)
-
-# XXX: This creates a many problems as it saves...
-#opts.Save('config.py', env)
-
-# Backwards compatability with old target configuration variable
-try:
-    targets = ARGUMENTS['targets']
-except KeyError:
-    pass
-else:
-    targets = targets.split(',')
-    print 'scons: warning: targets option is deprecated; pass the targets on their own such as'
-    print
-    print '  scons %s' % ' '.join(targets)
-    print 
-    COMMAND_LINE_TARGETS.append(targets)
-
-
-Help(opts.GenerateHelpText(env))
-
-# fail early for a common error on windows
-if env['gles']:
-    try:
-        import libxml2
-    except ImportError:
-        raise SCons.Errors.UserError, "GLES requires libxml2-python to build"
-
-#######################################################################
-# Environment setup
-
-# Includes
-env.Prepend(CPPPATH = [
-	'#/include',
-])
-env.Append(CPPPATH = [
-	'#/src/gallium/include',
-	'#/src/gallium/auxiliary',
-	'#/src/gallium/drivers',
-	'#/src/gallium/winsys',
-])
-
-if env['msvc']:
-    env.Append(CPPPATH = ['#include/c99'])
-
-# for debugging
-#print env.Dump()
-
-
-#######################################################################
-# Invoke host SConscripts 
-# 
-# For things that are meant to be run on the native host build machine, instead
-# of the target machine.
-#
-
-# Create host environent
-if env['crosscompile'] and not env['embedded']:
-    host_env = Environment(
-        options = opts,
-        # no tool used
-        tools = [],
-        toolpath = ['#scons'],
-        ENV = os.environ,
-    )
-
-    # Override options
-    host_env['platform'] = common.host_platform
-    host_env['machine'] = common.host_machine
-    host_env['toolchain'] = 'default'
-    host_env['llvm'] = False
-
-    host_env.Tool('gallium')
-
-    host_env['hostonly'] = True
-    assert host_env['crosscompile'] == False
-
-    if host_env['msvc']:
-        host_env.Append(CPPPATH = ['#include/c99'])
-
-    target_env = env
-    env = host_env
-    Export('env')
-
-    SConscript(
-        'src/SConscript',
-        variant_dir = host_env['build_dir'],
-        duplicate = 0, # http://www.scons.org/doc/0.97/HTML/scons-user/x2261.html
-    )
-
-    env = target_env
-
-Export('env')
-
-#######################################################################
-# Invoke SConscripts
-
-# TODO: Build several variants at the same time?
-# http://www.scons.org/wiki/SimultaneousVariantBuilds
-
-SConscript(
-	'src/SConscript',
-	variant_dir = env['build_dir'],
-	duplicate = 0 # http://www.scons.org/doc/0.97/HTML/scons-user/x2261.html
-)
-
-
-########################################################################
-# List all aliases
-
-try:
-    from SCons.Node.Alias import default_ans
-except ImportError:
-    pass
-else:
-    aliases = default_ans.keys()
-    aliases.sort()
-    env.Help('\n')
-    env.Help('Recognized targets:\n')
-    for alias in aliases:
-        env.Help('    %s\n' % alias)

acinclude.m4

@@ -1,119 +0,0 @@
-# A few convenience macros for Mesa, mostly to keep all the platform
-# specifics out of configure.ac.
-
-# MESA_PIC_FLAGS()
-#
-# Find out whether to build PIC code using the option --enable-pic and
-# the configure enable_static/enable_shared settings. If PIC is needed,
-# figure out the necessary flags for the platform and compiler.
-#
-# The platform checks have been shamelessly taken from libtool and
-# stripped down to just what's needed for Mesa. See _LT_COMPILER_PIC in
-# /usr/share/aclocal/libtool.m4 or
-# http://git.savannah.gnu.org/gitweb/?p=libtool.git;a=blob;f=libltdl/m4/libtool.m4;hb=HEAD
-#
-AC_DEFUN([MESA_PIC_FLAGS],
-[AC_REQUIRE([AC_PROG_CC])dnl
-AC_ARG_VAR([PIC_FLAGS], [compiler flags for PIC code])
-AC_ARG_ENABLE([pic],
-    [AS_HELP_STRING([--disable-pic],
-        [compile PIC objects @<:@default=enabled for shared builds
-        on supported platforms@:>@])],
-    [enable_pic="$enableval"
-    test "x$enable_pic" = x && enable_pic=auto],
-    [enable_pic=auto])
-# disable PIC by default for static builds
-if test "$enable_pic" = auto && test "$enable_static" = yes; then
-    enable_pic=no
-fi
-# if PIC hasn't been explicitly disabled, try to figure out the flags
-if test "$enable_pic" != no; then
-    AC_MSG_CHECKING([for $CC option to produce PIC])
-    # allow the user's flags to override
-    if test "x$PIC_FLAGS" = x; then
-        # see if we're using GCC
-        if test "x$GCC" = xyes; then
-            case "$host_os" in
-            aix*|beos*|cygwin*|irix5*|irix6*|osf3*|osf4*|osf5*)
-                # PIC is the default for these OSes.
-                ;;
-            mingw*|os2*|pw32*)
-                # This hack is so that the source file can tell whether
-                # it is being built for inclusion in a dll (and should
-                # export symbols for example).
-                PIC_FLAGS="-DDLL_EXPORT"
-                ;;
-            darwin*|rhapsody*)
-                # PIC is the default on this platform
-                # Common symbols not allowed in MH_DYLIB files
-                PIC_FLAGS="-fno-common"
-                ;;
-            hpux*)
-                # PIC is the default for IA64 HP-UX and 64-bit HP-UX,
-                # but not for PA HP-UX.
-                case $host_cpu in
-                hppa*64*|ia64*)
-                    ;;
-                *)
-                    PIC_FLAGS="-fPIC"
-                    ;;
-                esac
-                ;;
-            *)
-                # Everyone else on GCC uses -fPIC
-                PIC_FLAGS="-fPIC"
-                ;;
-            esac
-        else # !GCC
-            case "$host_os" in
-            hpux9*|hpux10*|hpux11*)
-                # PIC is the default for IA64 HP-UX and 64-bit HP-UX,
-                # but not for PA HP-UX.
-                case "$host_cpu" in
-                hppa*64*|ia64*)
-                    # +Z the default
-                    ;;
-                *)
-                    PIC_FLAGS="+Z"
-                    ;;
-                esac
-                ;;
-            linux*|k*bsd*-gnu)
-                case `basename "$CC"` in
-                icc*|ecc*|ifort*)
-                    PIC_FLAGS="-KPIC"
-                    ;;
-                pgcc*|pgf77*|pgf90*|pgf95*)
-                    # Portland Group compilers (*not* the Pentium gcc
-                    # compiler, which looks to be a dead project)
-                    PIC_FLAGS="-fpic"
-                    ;;
-                ccc*)
-                    # All Alpha code is PIC.
-                    ;;
-                xl*)
-                    # IBM XL C 8.0/Fortran 10.1 on PPC
-                    PIC_FLAGS="-qpic"
-                    ;;
-                *)
-                    case `$CC -V 2>&1 | sed 5q` in
-                    *Sun\ C*|*Sun\ F*)
-                        # Sun C 5.9 or Sun Fortran
-                        PIC_FLAGS="-KPIC"
-                        ;;
-                    esac
-                esac
-                ;;
-            solaris*)
-                PIC_FLAGS="-KPIC"
-                ;;
-            sunos4*)
-                PIC_FLAGS="-PIC"
-                ;;
-            esac
-        fi # GCC
-    fi # PIC_FLAGS
-    AC_MSG_RESULT([$PIC_FLAGS])
-fi
-AC_SUBST([PIC_FLAGS])
-])# MESA_PIC_FLAGS

autogen.sh

@@ -1,14 +0,0 @@
-#! /bin/sh
-
-srcdir=`dirname "$0"`
-test -z "$srcdir" && srcdir=.
-
-ORIGDIR=`pwd`
-cd "$srcdir"
-
-autoreconf -v --install || exit 1
-cd $ORIGDIR || exit $?
-
-if test -z "$NOCONFIGURE"; then
-    "$srcdir"/configure "$@"
-fi

bin/.gitignore

@@ -1,8 +0,0 @@
-config.guess
-config.sub
-install-sh
-/depcomp
-/missing
-ylwrap
-compile
-ar-lib

bin/get-pick-list.sh

@@ -1,29 +0,0 @@
-#!/bin/sh
-
-# Script for generating a list of candidates for cherry-picking to a stable branch
-
-# Grep for commits with "cherry picked from commit" in the commit message.
-git log --reverse --grep="cherry picked from commit" origin/master..HEAD |\
-	grep "cherry picked from commit" |\
-	sed -e 's/^[[:space:]]*(cherry picked from commit[[:space:]]*//' -e 's/)//' > already_picked
-
-# Grep for commits that were marked as a candidate for the stable tree.
-git log --reverse --pretty=%H -i --grep='^[[:space:]]*NOTE: This is a candidate' HEAD..origin/master |\
-while read sha
-do
-	# Check to see whether the patch is on the ignore list.
-	if [ -f .git/cherry-ignore ] ; then
-		if grep -q ^$sha .git/cherry-ignore ; then
-			continue
-		fi
-	fi
-
-	# Check to see if it has already been picked over.
-	if grep -q ^$sha already_picked ; then
-		continue
-	fi
-
-	git log -n1 --pretty=oneline $sha | cat
-done
-
-rm -f already_picked

bin/installmesa

@@ -53,8 +53,6 @@ if [ `uname` = "FreeBSD" ] ; then
 	CP_FLAGS="-f"
 elif [ `uname` = "Darwin" ] ; then
 	CP_FLAGS="-f"
-elif [ `uname` = "AIX" ] ; then
-	CP_FLAGS="-fh"
 else
 	CP_FLAGS="-fd"
 fi
@@ -62,10 +60,10 @@ fi
 
 set -v
 
-mkdir -p ${INCLUDE_DIR}
-mkdir -p ${INCLUDE_DIR}/GL
-# NOT YET: mkdir -p ${INCLUDE_DIR}/GLES
-mkdir -p ${LIB_DIR}
+mkdir ${INCLUDE_DIR}
+mkdir ${INCLUDE_DIR}/GL
+mkdir ${INCLUDE_DIR}/GLES
+mkdir ${LIB_DIR}
 cp -f ${TOP}/include/GL/*.h ${INCLUDE_DIR}/GL
 cp -f ${TOP}/src/glw/*.h ${INCLUDE_DIR}/GL
 # NOT YET: cp -f ${TOP}/include/GLES/*.h ${INCLUDE_DIR}/GLES

bin/minstall

@@ -1,112 +0,0 @@
-#!/bin/sh
-
-
-# A minimal replacement for 'install' that supports installing symbolic links.
-# Only a limited number of options are supported:
-# -d dir          Create a directory
-# -m mode         Sets a file's mode when installing
-
-
-# If these commands aren't portable, we'll need some "if (arch)" type stuff
-SYMLINK="ln -s"
-MKDIR="mkdir -p"
-RM="rm -f"
-
-MODE=""
-
-if [ "$1" = "-d" ] ; then
-	# make a directory path
-	$MKDIR "$2"
-	exit 0
-fi
-
-if [ "$1" = "-m" ] ; then
-	# set file mode
-	MODE=$2
-	shift 2
-fi
-
-# install file(s) into destination
-if [ $# -ge 2 ] ; then
-
-	# Last cmd line arg is the dest dir
-	for FILE in $@ ; do
-		DESTDIR="$FILE"
-	done
-
-	# Loop over args, moving them to DEST directory
-	I=1
-	for FILE in $@ ; do
-		if [ $I = $# ] ; then
-			# stop, don't want to install $DEST into $DEST
-			exit 0
-		fi
-
-                DEST=$DESTDIR
-
-                # On CYGWIN, because DLLs are loaded by the native Win32 loader,
-                # they are installed in the executable path.  Stub libraries used
-                # only for linking are installed in the library path
-                case `uname` in
-                    CYGWIN*)
-                        case $FILE in
-                            *.dll)
-                                DEST="$DEST/../bin"
-                                ;;
-                            *)
-                                ;;
-                        esac
-	                ;;
-                    *)
-                        ;;
-                esac
-
-		PWDSAVE=`pwd`
-
-		# determine file's type
-		if [ -h "$FILE" ] ; then
-			#echo $FILE is a symlink
-			# Unfortunately, cp -d isn't universal so we have to
-			# use a work-around.
-
-			# Use ls -l to find the target that the link points to
-			LL=`ls -l "$FILE"`
-			for L in $LL ; do
-				TARGET=$L
-			done
-			#echo $FILE is a symlink pointing to $TARGET
-
-			FILE=`basename "$FILE"`
-			# Go to $DEST and make the link
-			cd "$DEST"        # pushd
-				$RM "$FILE"
-				$SYMLINK "$TARGET" "$FILE"
-			cd "$PWDSAVE"     # popd
-
-		elif [ -f "$FILE" ] ; then
-			#echo "$FILE" is a regular file
-			# Only copy if the files differ
-			if ! cmp -s $FILE $DEST/`basename $FILE`; then
-				$RM "$DEST/`basename $FILE`"
-				cp "$FILE" "$DEST"
-			fi
-			if [ $MODE ] ; then
-				FILE=`basename "$FILE"`
-				chmod $MODE "$DEST/$FILE"
-			fi
-		else
-			echo "Unknown type of argument: " "$FILE"
-			exit 1
-		fi
-
-		I=`expr $I + 1`
-	done
-
-	exit 0
-fi
-
-# If we get here, we didn't find anything to do
-echo "Usage:"
-echo "  install -d dir                      Create named directory"
-echo "  install [-m mode] file [...] dest   Install files in destination"
-

bin/shortlog_mesa.sh

@@ -1,23 +0,0 @@
-#!/bin/bash
-
-# This script is used to generate the list of changes that
-# appears in the release notes files, with HTML formatting.
-
-
-typeset -i in_log=0
-
-git shortlog $* | while read l
-do
-    if [ $in_log -eq 0 ]; then
-	echo '<p>'$l'</p>'
-	echo '<ul>'
-	in_log=1
-    elif echo "$l" | egrep -q '^$' ; then
-	echo '</ul>'
-	echo
-	in_log=0
-    else
-        mesg=$(echo $l | sed 's/ (cherry picked from commit [0-9a-f]\+)//;s/\&/&amp;/g;s/</\&lt;/g;s/>/\&gt;/g')
-	echo '  <li>'${mesg}'</li>'
-    fi
-done

common.py

@@ -1,103 +0,0 @@
-#######################################################################
-# Common SCons code
-
-import os
-import os.path
-import re
-import subprocess
-import sys
-import platform as _platform
-
-import SCons.Script.SConscript
-
-
-#######################################################################
-# Defaults
-
-host_platform = _platform.system().lower()
-if host_platform.startswith('cygwin'):
-    host_platform = 'cygwin'
-
-# Search sys.argv[] for a "platform=foo" argument since we don't have
-# an 'env' variable at this point.
-if 'platform' in SCons.Script.ARGUMENTS:
-    target_platform = SCons.Script.ARGUMENTS['platform']
-else:
-    target_platform = host_platform
-
-_machine_map = {
-	'x86': 'x86',
-	'i386': 'x86',
-	'i486': 'x86',
-	'i586': 'x86',
-	'i686': 'x86',
-	'BePC': 'x86',
-	'Intel': 'x86',
-	'ppc' : 'ppc',
-	'BeBox': 'ppc',
-	'BeMac': 'ppc',
-	'AMD64': 'x86_64',
-	'x86_64': 'x86_64',
-	'sparc': 'sparc',
-	'sun4u': 'sparc',
-}
-
-
-# find host_machine value
-if 'PROCESSOR_ARCHITECTURE' in os.environ:
-	host_machine = os.environ['PROCESSOR_ARCHITECTURE']
-else:
-	host_machine = _platform.machine()
-host_machine = _machine_map.get(host_machine, 'generic')
-
-default_machine = host_machine
-default_toolchain = 'default'
-
-if target_platform == 'windows' and host_platform != 'windows':
-    default_machine = 'x86'
-    default_toolchain = 'crossmingw'
-
-
-# find default_llvm value
-if 'LLVM' in os.environ:
-    default_llvm = 'yes'
-else:
-    default_llvm = 'no'
-    try:
-        if target_platform != 'windows' and \
-           subprocess.call(['llvm-config', '--version'], stdout=subprocess.PIPE) == 0:
-            default_llvm = 'yes'
-    except:
-        pass
-
-
-#######################################################################
-# Common options
-
-def AddOptions(opts):
-	try:
-		from SCons.Variables.BoolVariable import BoolVariable as BoolOption
-	except ImportError:
-		from SCons.Options.BoolOption import BoolOption
-	try:
-		from SCons.Variables.EnumVariable import EnumVariable as EnumOption
-	except ImportError:
-		from SCons.Options.EnumOption import EnumOption
-	opts.Add(EnumOption('build', 'build type', 'debug',
-	                  allowed_values=('debug', 'checked', 'profile', 'release')))
-	opts.Add(BoolOption('verbose', 'verbose output', 'no'))
-	opts.Add(EnumOption('machine', 'use machine-specific assembly code', default_machine,
-											 allowed_values=('generic', 'ppc', 'x86', 'x86_64')))
-	opts.Add(EnumOption('platform', 'target platform', host_platform,
-											 allowed_values=('cygwin', 'darwin', 'freebsd', 'haiku', 'linux', 'sunos', 'windows')))
-	opts.Add(BoolOption('embedded', 'embedded build', 'no'))
-	opts.Add('toolchain', 'compiler toolchain', default_toolchain)
-	opts.Add(BoolOption('gles', 'EXPERIMENTAL: enable OpenGL ES support', 'no'))
-	opts.Add(BoolOption('llvm', 'use LLVM', default_llvm))
-	opts.Add(BoolOption('openmp', 'EXPERIMENTAL: compile with openmp (swrast)', 'no'))
-	opts.Add(BoolOption('debug', 'DEPRECATED: debug build', 'yes'))
-	opts.Add(BoolOption('profile', 'DEPRECATED: profile build', 'no'))
-	opts.Add(BoolOption('quiet', 'DEPRECATED: profile build', 'yes'))
-	opts.Add(BoolOption('texture_float', 'enable floating-point textures and renderbuffers', 'no'))
-	if host_platform == 'windows':
-		opts.Add(EnumOption('MSVS_VERSION', 'MS Visual C++ version', None, allowed_values=('7.1', '8.0', '9.0')))

configs/.gitignore

@@ -1,2 +0,0 @@
-current
-autoconf

configs/aix

@@ -0,0 +1,28 @@
+# Configuration for AIX, dynamic libs
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = aix
+
+# Compiler and flags
+CC = cc
+CXX = xlC
+
+CFLAGS = -O -DAIXV3
+CXXFLAGS = -O -DAIXV3
+MKLIB_OPTIONS =
+
+# Library names (actual file names)
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a
+
+GL_LIB_DEPS = -lX11 -lXext -lm
+GLU_LIB_DEPS = -L$(TOP)/lib -l$(GL_LIB) -lm -lC
+GLUT_LIB_DEPS = -L$(TOP)/lib -l$(GLU_LIB) -l$(GL_LIB) -lXi -lXmu -lX11 -lm
+GLW_LIB_DEPS = -L$(TOP)/lib -l$(GL_LIB) -lXt -lX11
+OSMESA_LIB_DEPS = -L$(TOP)/lib -l$(GL_LIB)
+APP_LIB_DEPS = -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lX11 -lXext -lXmu -lXi -lm -lC
+

configs/aix-64

@@ -0,0 +1,28 @@
+# Configuration for AIX 64-bit, dynamic libs
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = aix-64
+
+# Compiler and flags
+CC = xlc
+CXX = xlC
+
+CFLAGS = -q64 -qmaxmem=16384 -O -DAIXV3
+CXXFLAGS = -q64 -qmaxmem=16384 -O -DAIXV3
+MKLIB_OPTIONS = -arch AIX64
+
+# Library names (actual file names)
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a
+
+GL_LIB_DEPS = -lX11 -lXext -lm
+GLU_LIB_DEPS = -L$(TOP)/lib -l$(GL_LIB) -lm -lC
+GLUT_LIB_DEPS = -L$(TOP)/lib -l$(GLU_LIB) -l$(GL_LIB) -lXi -lXmu -lX11 -lm
+GLW_LIB_DEPS = -L$(TOP)/lib -l$(GL_LIB) -lXt -lX11
+OSMESA_LIB_DEPS = -L$(TOP)/lib -l$(GL_LIB)
+APP_LIB_DEPS = -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lX11 -lXext -lXmu -lXi -lm -lC
+

configs/aix-gcc

@@ -0,0 +1,19 @@
+# Configuration for AIX with gcc
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = aix-gcc
+
+# Compiler and flags
+CC = gcc
+CXX = g++
+
+CFLAGS = -O2 -DAIXV3
+CXXFLAGS = -O2 -DAIXV3
+
+MKLIB_OPTIONS = -arch aix-gcc
+GL_LIB_DEPS = -lX11 -lXext -lm
+GLU_LIB_DEPS = -L$(LIB_DIR) -l$(GL_LIB) -lm
+GLUT_LIB_DEPS = -L$(LIB_DIR -l$(GLU_LIB) -l$(GL_LIB) -lXi -lXmu
+APP_LIB_DEPS = -L$(LIB_DIR) -Wl,-brtl -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm -lX11 -lXext -lXmu -lXi
+

configs/aix-static

@@ -0,0 +1,23 @@
+# Configuration for AIX, static libs
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = aix-static
+
+# Compiler and flags
+CC = cc
+CXX = xlC
+
+CFLAGS = -O -DAIXV3
+CXXFLAGS = -O -DAIXV3
+MKLIB_OPTIONS = -static
+
+# Library names (actual file names)
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a
+
+APP_LIB_DEPS = -L$(LIB_DIR) -lX11 -lXext -lXmu -lXi -lm
+

configs/beos

@@ -0,0 +1,100 @@
+# Configuration for BeOS
+# Written by Philippe Houdoin
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = beos
+
+
+DEFINES = 	\
+	-DBEOS_THREADS 
+
+MACHINE=$(shell uname -m)
+ifeq ($(MACHINE), BePC)
+	CPU = x86
+else
+	CPU = ppc
+endif
+
+ifeq ($(CPU), x86)
+	# BeOS x86 settings
+
+	DEFINES += \
+		-DGNU_ASSEMBLER \
+		-DUSE_X86_ASM \
+		-DUSE_MMX_ASM \
+		-DUSE_3DNOW_ASM \
+		-DUSE_SSE_ASM
+	
+	ASM_SOURCES = $(X86_SOURCES)
+	ASM_API = $(X86_API)
+
+	CC = gcc
+	CXX = g++
+	LD = gcc
+	
+	CFLAGS = \
+		-Wall -Wno-multichar -Wno-ctor-dtor-privacy \
+		$(DEFINES)
+
+	CXXFLAGS = $(CFLAGS)
+
+	LDFLAGS += -Xlinker
+
+	ifdef DEBUG
+		CFLAGS   += -g -O0
+		LDFLAGS += -g
+		DEFINES += -DDEBUG
+	else
+		CFLAGS   += -O3
+	endif
+
+	GLUT_CFLAGS = -fexceptions
+
+else
+	# BeOS PPC settings
+
+	CC = mwcc
+	CXX = $(CC)
+	LD = mwldppc
+
+	CFLAGS = \
+		-w on -requireprotos \
+		$(DEFINES)
+
+	CXXFLAGS = $(CFLAGS)
+
+	LDFLAGS += \
+		-export pragma \
+		-init _init_routine_ \
+		-term _term_routine_ \
+		-lroot \
+		/boot/develop/lib/ppc/glue-noinit.a \
+		/boot/develop/lib/ppc/init_term_dyn.o \
+		/boot/develop/lib/ppc/start_dyn.o 
+
+	ifdef DEBUG
+		CFLAGS   += -g -O0
+		CXXFLAGS += -g -O0
+		LDFLAGS += -g
+	else
+		CFLAGS   += -O7
+		CXXFLAGS += -O7
+	endif
+
+	GLUT_CFLAGS = -fexceptions
+endif
+
+# Directories
+SRC_DIRS = mesa glu glut/beos
+GLU_DIRS = sgi
+DRIVER_DIRS = beos
+PROGRAM_DIRS = beos samples redbook demos tests
+
+# Library/program dependencies
+GL_LIB_DEPS = 
+OSMESA_LIB_DEPS = -L$(LIB_DIR) -l$(GL_LIB)
+GLU_LIB_DEPS =  
+GLUT_LIB_DEPS = -lgame -L$(LIB_DIR) -l$(GL_LIB)
+APP_LIB_DEPS = -lbe -L$(LIB_DIR) -l$(GL_LIB) -l$(GLUT_LIB)
+

configs/current.in

@@ -1,221 +0,0 @@
-# Autoconf configuration
-
-# Pull in the defaults
-include $(TOP)/configs/default
-
-# This is generated by configure
-CONFIG_NAME = autoconf
-
-# Compiler and flags
-CC = @CC@
-CXX = @CXX@
-PIC_FLAGS = @PIC_FLAGS@
-DEFINES = @DEFINES@
-API_DEFINES = @API_DEFINES@
-SHARED_GLAPI = @SHARED_GLAPI@
-CFLAGS_NOVISIBILITY = @CPPFLAGS@ @CFLAGS@ \
-	$(PIC_FLAGS) $(DEFINES)
-CXXFLAGS_NOVISIBILITY = @CPPFLAGS@ @CXXFLAGS@ \
-	$(PIC_FLAGS) $(DEFINES)
-CFLAGS = $(CFLAGS_NOVISIBILITY) @VISIBILITY_CFLAGS@
-CXXFLAGS = $(CXXFLAGS_NOVISIBILITY) @VISIBILITY_CXXFLAGS@
-LDFLAGS = @LDFLAGS@
-RADEON_CFLAGS = @RADEON_CFLAGS@
-RADEON_LIBS = @RADEON_LIBS@
-NOUVEAU_CFLAGS = @NOUVEAU_CFLAGS@
-NOUVEAU_LIBS = @NOUVEAU_LIBS@
-INTEL_LIBS = @INTEL_LIBS@
-INTEL_CFLAGS = @INTEL_CFLAGS@
-X11_LIBS = @X11_LIBS@
-X11_CFLAGS = @X11_CFLAGS@
-LLVM_BINDIR = @LLVM_BINDIR@
-LLVM_CFLAGS = @LLVM_CFLAGS@
-LLVM_CPPFLAGS = @LLVM_CPPFLAGS@
-LLVM_CXXFLAGS = @LLVM_CXXFLAGS@
-LLVM_LDFLAGS = @LLVM_LDFLAGS@
-LLVM_LIBDIR = @LLVM_LIBDIR@
-LLVM_LIBS = @LLVM_LIBS@
-LLVM_INCLUDEDIR = @LLVM_INCLUDEDIR@
-GLW_CFLAGS = @GLW_CFLAGS@
-GLX_TLS = @GLX_TLS@
-
-# dlopen
-DLOPEN_LIBS = @DLOPEN_LIBS@
-
-# Source selection
-MESA_ASM_FILES = @MESA_ASM_FILES@
-
-# Misc tools and flags
-MAKE = @MAKE@
-SHELL = @SHELL@
-MKLIB_OPTIONS = @MKLIB_OPTIONS@
-MKDEP = @MKDEP@
-MKDEP_OPTIONS = @MKDEP_OPTIONS@
-INSTALL = @INSTALL@
-AWK = @AWK@
-GREP = @GREP@
-NM = @NM@
-
-# Perl
-PERL = @PERL@
-
-# Indent (used for generating dispatch tables)
-INDENT = @INDENT@
-INDENT_FLAGS = @INDENT_FLAGS@
-
-# Python and flags (generally only needed by the developers)
-PYTHON2 = @PYTHON2@
-PYTHON_FLAGS = -t -O -O
-
-# Flex and Bison for GLSL compiler
-FLEX = @LEX@
-BISON = @YACC@
-
-# Library names (base name)
-GL_LIB = @GL_LIB@
-GLU_LIB = @GLU_LIB@
-GLW_LIB = GLw
-OSMESA_LIB = @OSMESA_LIB@
-GLESv1_CM_LIB = GLESv1_CM
-GLESv2_LIB = GLESv2
-VG_LIB = OpenVG
-GLAPI_LIB = glapi
-
-# Library names (actual file names)
-GL_LIB_NAME = @GL_LIB_NAME@
-GLU_LIB_NAME = @GLU_LIB_NAME@
-GLW_LIB_NAME = @GLW_LIB_NAME@
-OSMESA_LIB_NAME = @OSMESA_LIB_NAME@
-EGL_LIB_NAME = @EGL_LIB_NAME@
-GLESv1_CM_LIB_NAME = @GLESv1_CM_LIB_NAME@
-GLESv2_LIB_NAME = @GLESv2_LIB_NAME@
-VG_LIB_NAME = @VG_LIB_NAME@
-GLAPI_LIB_NAME = @GLAPI_LIB_NAME@
-
-# Globs used to install the lib and all symlinks
-GL_LIB_GLOB = @GL_LIB_GLOB@
-GLU_LIB_GLOB = @GLU_LIB_GLOB@
-GLW_LIB_GLOB = @GLW_LIB_GLOB@
-EGL_LIB_GLOB = @EGL_LIB_GLOB@
-GLESv1_CM_LIB_GLOB = @GLESv1_CM_LIB_GLOB@
-GLESv2_LIB_GLOB = @GLESv2_LIB_GLOB@
-VG_LIB_GLOB = @VG_LIB_GLOB@
-GLAPI_LIB_GLOB = @GLAPI_LIB_GLOB@
-
-# Directories to build
-LIB_DIR = @LIB_DIR@
-SRC_DIRS = @SRC_DIRS@
-DRIVER_DIRS = @DRIVER_DIRS@
-GALLIUM_DIRS = @GALLIUM_DIRS@
-GALLIUM_DRIVERS_DIRS = @GALLIUM_DRIVERS_DIRS@
-GALLIUM_WINSYS_DIRS = @GALLIUM_WINSYS_DIRS@
-GALLIUM_TARGET_DIRS = @GALLIUM_TARGET_DIRS@
-GALLIUM_STATE_TRACKERS_DIRS = @GALLIUM_STATE_TRACKERS_DIRS@
-GALLIUM_AUXILIARIES = $(TOP)/src/gallium/auxiliary/libgallium.a
-GALLIUM_DRIVERS = $(foreach DIR,$(GALLIUM_DRIVERS_DIRS),$(TOP)/src/gallium/drivers/$(DIR)/lib$(DIR).a)
-
-# Driver specific build vars
-DRI_DIRS = @DRI_DIRS@
-EGL_PLATFORMS = @EGL_PLATFORMS@
-EGL_CLIENT_APIS = @EGL_CLIENT_APIS@
-
-# Dependencies
-X11_INCLUDES = @X11_INCLUDES@
-
-# GLw motif setup
-GLW_SOURCES = @GLW_SOURCES@
-MOTIF_CFLAGS = @MOTIF_CFLAGS@
-
-# Library/program dependencies
-GL_LIB_DEPS = @GL_LIB_DEPS@
-OSMESA_LIB_DEPS = -L$(TOP)/$(LIB_DIR) @OSMESA_MESA_DEPS@ \
-	@OSMESA_LIB_DEPS@
-EGL_LIB_DEPS = @EGL_LIB_DEPS@
-GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) @GLU_MESA_DEPS@ \
-	@GLU_LIB_DEPS@
-GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) @GLW_MESA_DEPS@ \
-	@GLW_LIB_DEPS@
-GLESv1_CM_LIB_DEPS = @GLESv1_CM_LIB_DEPS@
-GLESv2_LIB_DEPS = @GLESv2_LIB_DEPS@
-VG_LIB_DEPS = @VG_LIB_DEPS@
-GLAPI_LIB_DEPS = @GLAPI_LIB_DEPS@
-
-# DRI dependencies
-DRI_LIB_DEPS = @DRI_LIB_DEPS@
-GALLIUM_DRI_LIB_DEPS = @GALLIUM_DRI_LIB_DEPS@
-LIBDRM_CFLAGS = @LIBDRM_CFLAGS@
-LIBDRM_LIB = @LIBDRM_LIBS@
-DRI2PROTO_CFLAGS = @DRI2PROTO_CFLAGS@
-GLPROTO_CFLAGS = @GLPROTO_CFLAGS@
-EXPAT_INCLUDES = @EXPAT_INCLUDES@
-
-# Autoconf directories
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-libdir = @libdir@
-includedir = @includedir@
-
-# Installation directories (for make install)
-INSTALL_DIR = $(prefix)
-INSTALL_LIB_DIR = $(libdir)
-INSTALL_INC_DIR = $(includedir)
-
-# DRI installation directories
-DRI_DRIVER_INSTALL_DIR = @DRI_DRIVER_INSTALL_DIR@
-
-# Where libGL will look for DRI hardware drivers
-DRI_DRIVER_SEARCH_DIR = @DRI_DRIVER_SEARCH_DIR@
-
-# EGL driver install directory
-EGL_DRIVER_INSTALL_DIR = @EGL_DRIVER_INSTALL_DIR@
-
-# XVMC library install directory
-XVMC_LIB_INSTALL_DIR=@XVMC_LIB_INSTALL_DIR@
-
-# VDPAU library install directory
-VDPAU_LIB_INSTALL_DIR=@VDPAU_LIB_INSTALL_DIR@
-
-# VA library install directory
-VA_LIB_INSTALL_DIR=@VA_LIB_INSTALL_DIR@
-
-# Xorg driver install directory (for xorg state-tracker)
-XORG_DRIVER_INSTALL_DIR = @XORG_DRIVER_INSTALL_DIR@
-
-# Path to OpenCL C library libclc
-LIBCLC_PATH = @LIBCLC_PATH@
-
-# pkg-config substitutions
-GL_PC_REQ_PRIV = @GL_PC_REQ_PRIV@
-GL_PC_LIB_PRIV = @GL_PC_LIB_PRIV@
-GL_PC_CFLAGS = @GL_PC_CFLAGS@
-DRI_PC_REQ_PRIV = @DRI_PC_REQ_PRIV@
-GLU_PC_REQ = @GLU_PC_REQ@
-GLU_PC_REQ_PRIV = @GLU_PC_REQ_PRIV@
-GLU_PC_LIB_PRIV = @GLU_PC_LIB_PRIV@
-GLU_PC_CFLAGS = @GLU_PC_CFLAGS@
-GLW_PC_REQ_PRIV = @GLW_PC_REQ_PRIV@
-GLW_PC_LIB_PRIV = @GLW_PC_LIB_PRIV@
-GLW_PC_CFLAGS = @GLW_PC_CFLAGS@
-OSMESA_PC_REQ = @OSMESA_PC_REQ@
-OSMESA_PC_LIB_PRIV = @OSMESA_PC_LIB_PRIV@
-GLESv1_CM_PC_LIB_PRIV = @GLESv1_CM_PC_LIB_PRIV@
-GLESv2_PC_LIB_PRIV = @GLESv2_PC_LIB_PRIV@
-EGL_PC_REQ_PRIV = @GL_PC_REQ_PRIV@
-EGL_PC_LIB_PRIV = @GL_PC_LIB_PRIV@
-EGL_PC_CFLAGS = @GL_PC_CFLAGS@
-
-XCB_DRI2_CFLAGS = @XCB_DRI2_CFLAGS@
-XCB_DRI2_LIBS = @XCB_DRI2_LIBS@
-LIBUDEV_CFLAGS = @LIBUDEV_CFLAGS@
-LIBUDEV_LIBS = @LIBUDEV_LIBS@
-WAYLAND_CFLAGS = @WAYLAND_CFLAGS@
-WAYLAND_LIBS = @WAYLAND_LIBS@
-
-MESA_LLVM = @MESA_LLVM@
-
-LLVM_VERSION = @LLVM_VERSION@
-
-HAVE_XF86VIDMODE = @HAVE_XF86VIDMODE@
-
-GALLIUM_PIPE_LOADER_DEFINES = @GALLIUM_PIPE_LOADER_DEFINES@
-GALLIUM_PIPE_LOADER_LIBS = @GALLIUM_PIPE_LOADER_LIBS@

configs/darwin

@@ -0,0 +1,31 @@
+# Configuration for Darwin / MacOS X, making dynamic libs
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = darwin
+
+# Compiler and flags
+CC = c++
+CXX = c++
+CFLAGS = -I/usr/X11R6/include -O3 -fPIC -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
+CXXFLAGS = -I/usr/X11R6/include -O3 -fPIC -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
+
+MKLIB_OPTIONS = -cplusplus
+
+# Library names (actual file names)
+GL_LIB_NAME = libGL.dylib
+GLU_LIB_NAME = libGLU.dylib
+GLUT_LIB_NAME = libglut.dylib
+GLW_LIB_NAME = libGLw.dylib
+OSMESA_LIB_NAME = libOSMesa.dylib
+
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread
+OSMESA_LIB_DEPS = -L$(LIB_DIR) -lGL
+GLU_LIB_DEPS = -L$(LIB_DIR) -lGL
+GLUT_LIB_DEPS = -L$(LIB_DIR) -lGL -lGLU -L/usr/X11R6/lib -lX11 -lXmu -lXi -lXext
+GLW_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXt $(TOP)/lib/GL.dylib
+APP_LIB_DEPS = -L$(TOP)/lib -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
+
+# omit glw lib for now:
+SRC_DIRS = mesa glu glut/glx
+

configs/darwin-static

@@ -0,0 +1,24 @@
+# Configuration for Darwin / MacOS X, making static libs
+
+include $(TOP)/configs/darwin
+
+CONFIG_NAME = darwin-static
+
+# Compiler and flags
+CFLAGS = -I/usr/X11R6/include -O3 -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
+CXXFLAGS = -I/usr/X11R6/include -O3 -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
+MKLIB_OPTIONS = -static
+
+# Library names (actual file names)
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a
+
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread
+OSMESA_LIB_DEPS = 
+GLU_LIB_DEPS = 
+GLUT_LIB_DEPS = 
+GLW_LIB_DEPS = 
+APP_LIB_DEPS = -L$(TOP)/lib -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm

configs/default

@@ -2,16 +2,13 @@
 
 # This is included by other config files which may override some
 # of these variables.
-# Think of this as a base class from which configs are derived.
-
 
 CONFIG_NAME = default
 
 # Version info
-MESA_MAJOR=9
-MESA_MINOR=0
+MESA_MAJOR=6
+MESA_MINOR=5
 MESA_TINY=0
-MESA_VERSION = $(MESA_MAJOR).$(MESA_MINOR).$(MESA_TINY)
 
 # external projects.  This should be useless now that we use libdrm.
 DRM_SOURCE_PATH=$(TOP)/../drm
@@ -21,160 +18,57 @@ CC = cc
 CXX = CC
 CFLAGS = -O
 CXXFLAGS = -O
-LDFLAGS =
 GLU_CFLAGS = 
-GLX_TLS = no
-
-# Compiler for building demos/tests/etc
-APP_CC = $(CC)
-APP_CXX = $(CXX)
 
 # Misc tools and flags
-SHELL = /bin/sh
-MKLIB = $(SHELL) $(TOP)/bin/mklib
 MKLIB_OPTIONS = 
 MKDEP = makedepend
 MKDEP_OPTIONS = -fdepend
 MAKE = make
-FLEX = flex
-BISON = bison
-PKG_CONFIG = pkg-config
 
-# Use MINSTALL for installing libraries, INSTALL for everything else
-MINSTALL = $(SHELL) $(TOP)/bin/minstall
-INSTALL = $(MINSTALL)
-
-# Tools for regenerating glapi (generally only needed by the developers)
+# Python and flags (generally only needed by the developers)
 PYTHON2 = python
 PYTHON_FLAGS = -t -O -O
-INDENT = indent
-INDENT_FLAGS = -i4 -nut -br -brs -npcs -ce -T GLubyte -T GLbyte -T Bool
 
 # Library names (base name)
 GL_LIB = GL
 GLU_LIB = GLU
+GLUT_LIB = glut
 GLW_LIB = GLw
 OSMESA_LIB = OSMesa
-EGL_LIB = EGL
-GLESv1_CM_LIB = GLESv1_CM
-GLESv2_LIB = GLESv2
-VG_LIB = OpenVG
-GLAPI_LIB = glapi
+
 
 # Library names (actual file names)
 GL_LIB_NAME = lib$(GL_LIB).so
 GLU_LIB_NAME = lib$(GLU_LIB).so
+GLUT_LIB_NAME = lib$(GLUT_LIB).so
 GLW_LIB_NAME = lib$(GLW_LIB).so
 OSMESA_LIB_NAME = lib$(OSMESA_LIB).so
-EGL_LIB_NAME = lib$(EGL_LIB).so
-GLESv1_CM_LIB_NAME = lib$(GLESv1_CM_LIB).so
-GLESv2_LIB_NAME = lib$(GLESv2_LIB).so
-VG_LIB_NAME = lib$(VG_LIB).so
-GLAPI_LIB_NAME = lib$(GLAPI_LIB).so
 
-# globs used to install the lib and all symlinks
-GL_LIB_GLOB = $(GL_LIB_NAME)*
-GLU_LIB_GLOB = $(GLU_LIB_NAME)*
-GLW_LIB_GLOB = $(GLW_LIB_NAME)*
-EGL_LIB_GLOB = $(EGL_LIB_NAME)*
-GLESv1_CM_LIB_GLOB = $(GLESv1_CM_LIB_NAME)*
-GLESv2_LIB_GLOB = $(GLESv2_LIB_NAME)*
-VG_LIB_GLOB = $(VG_LIB_NAME)*
-GLAPI_LIB_GLOB = $(GLAPI_LIB_NAME)*
 
 # Optional assembly language optimization files for libGL
-MESA_ASM_FILES =
+ASM_SOURCES = 
 
 # GLw widget sources (Append "GLwMDrawA.c" here and add -lXm to GLW_LIB_DEPS in
 # order to build the Motif widget too)
 GLW_SOURCES = GLwDrawA.c
-MOTIF_CFLAGS = -I/usr/include/Motif1.2
 
 
-# Directories to build
-LIB_DIR = lib
-SRC_DIRS = glsl mapi/glapi mapi/vgapi mesa \
-	gallium egl gallium/winsys gallium/targets
+# Directories
+LIB_DIR = $(TOP)/lib
+INSTALL_PREFIX = /usr/local
+SRC_DIRS = mesa glu glut/glx glw
+GLU_DIRS = sgi
 DRIVER_DIRS = x11 osmesa
+# Which subdirs under $(TOP)/progs/ to enter:
+PROGRAM_DIRS = demos redbook samples xdemos
 
-# Gallium directories and
-GALLIUM_DIRS = auxiliary drivers state_trackers
-GALLIUM_AUXILIARIES = $(TOP)/src/gallium/auxiliary/libgallium.a
-GALLIUM_DRIVERS_DIRS = softpipe trace rbug noop identity galahad i915 svga r300 nvfx nv50
-GALLIUM_DRIVERS = $(foreach DIR,$(GALLIUM_DRIVERS_DIRS),$(TOP)/src/gallium/drivers/$(DIR)/lib$(DIR).a)
-GALLIUM_WINSYS_DIRS = sw sw/xlib
-GALLIUM_TARGET_DIRS = libgl-xlib
-GALLIUM_STATE_TRACKERS_DIRS = glx vega
 
-# native platforms EGL should support
-EGL_PLATFORMS = x11
-EGL_CLIENT_APIS = $(GL_LIB)
-
-# Library dependencies
-#EXTRA_LIB_PATH ?=
-GL_LIB_DEPS     = -lX11 -lXext -lm -lpthread
-EGL_LIB_DEPS    = -ldl -lpthread
-OSMESA_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB)
-GLU_LIB_DEPS    = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lm
-GLW_LIB_DEPS    = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lXt -lX11
-GLESv1_CM_LIB_DEPS = -lpthread
-GLESv2_LIB_DEPS = -lpthread
-VG_LIB_DEPS    = -lpthread
-GLAPI_LIB_DEPS = -lpthread
-
-# Program dependencies - specific GL libraries added in Makefiles
-X11_LIBS = -lX11
-
-DLOPEN_LIBS = -ldl
-
-# Installation directories (for make install)
-INSTALL_DIR = /usr/local
-INSTALL_LIB_DIR = $(INSTALL_DIR)/$(LIB_DIR)
-INSTALL_INC_DIR = $(INSTALL_DIR)/include
-DRI_DRIVER_INSTALL_DIR = $(INSTALL_LIB_DIR)/dri
-
-# Where libGL will look for DRI hardware drivers
-DRI_DRIVER_SEARCH_DIR = $(DRI_DRIVER_INSTALL_DIR)
-
-# EGL driver install directory
-EGL_DRIVER_INSTALL_DIR = $(INSTALL_LIB_DIR)/egl
-
-# Xorg driver install directory (for xorg state-tracker)
-XORG_DRIVER_INSTALL_DIR = $(INSTALL_LIB_DIR)/xorg/modules/drivers
-
-# pkg-config substitutions
-GL_PC_REQ_PRIV =
-GL_PC_LIB_PRIV =
-GL_PC_CFLAGS =
-DRI_PC_REQ_PRIV =
-GLU_PC_REQ = gl
-GLU_PC_REQ_PRIV =
-GLU_PC_LIB_PRIV =
-GLU_PC_CFLAGS =
-GLW_PC_REQ_PRIV =
-GLW_PC_LIB_PRIV =
-GLW_PC_CFLAGS =
-OSMESA_PC_REQ =
-OSMESA_PC_LIB_PRIV =
-GLESv1_CM_PC_REQ_PRIV =
-GLESv1_CM_PC_LIB_PRIV =
-GLESv1_CM_PC_CFLAGS =
-GLESv2_PC_REQ_PRIV =
-GLESv2_PC_LIB_PRIV =
-GLESv2_PC_CFLAGS =
-VG_PC_REQ_PRIV =
-VG_PC_LIB_PRIV =
-VG_PC_CFLAGS =
-
-# default targets
-# this helps reduce the mismatch between our automake Makefiles and the old
-# custom Makefiles while we transition.
-
-all: default
-
-am--refresh:
-
-distclean: clean
-
-check:
-test:
+# Library/program dependencies
+EXTRA_LIB_PATH ?=
+GL_LIB_DEPS = $(EXTRA_LIB_PATH) -lX11 -lXext -lm -lpthread
+OSMESA_LIB_DEPS = -L$(LIB_DIR) -l$(GL_LIB)
+GLU_LIB_DEPS = -L$(LIB_DIR) -l$(GL_LIB) -lm
+GLUT_LIB_DEPS = -L$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) $(EXTRA_LIB_PATH) -lX11 -lXmu -lXt -lXi -lm
+GLW_LIB_DEPS = -L$(LIB_DIR) -l$(GL_LIB) $(EXTRA_LIB_PATH) -lXt -lX11
+APP_LIB_DEPS = -L$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm

configs/freebsd

@@ -0,0 +1,17 @@
+# Configuration for FreeBSD
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = FreeBSD
+
+# Compiler and flags
+CC = gcc
+CXX = g++
+MAKE = gmake
+
+CFLAGS = -O2 -fPIC -pedantic -I/usr/X11R6/include -DUSE_XSHM -DHZ=100 \
+	$(ASM_FLAGS)
+CXXFLAGS = -O2 -fPIC -pedantic
+GLUT_CFLAGS = -fexceptions
+
+APP_LIB_DEPS = -L$(LIB_DIR) -L/usr/X11R6/lib -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lXext -lXmu -lXi -lX11 -lm

configs/freebsd-dri

@@ -0,0 +1,45 @@
+# -*-makefile-*-
+# Configuration for freebsd-dri: FreeBSD DRI hardware drivers
+
+include $(TOP)/configs/freebsd
+
+CONFIG_NAME = freebsd-dri
+
+# Compiler and flags
+CC = gcc
+CXX = g++
+WARN_FLAGS = -Wall
+OPT_FLAGS = -O
+
+EXPAT_INCLUDES = -I/usr/local/include
+X11_INCLUDES = -I/usr/X11R6/include
+DEFINES = -DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 -DIN_DRI_DRIVER \
+	-DGLX_DIRECT_RENDERING -DHAVE_ALIAS
+CFLAGS = $(DEFINES) -Wmissing-prototypes -g -std=c99  -Wundef -fPIC \
+	-ffast-math $(ASM_FLAGS) $(X11_INCLUDES)
+CXXFLAGS = $(DEFINES) -Wall -g -ansi -pedantic -fPIC
+
+ASM_SOURCES = 
+
+# Library/program dependencies
+LIBDRM_LIB = `pkg-config --libs libdrm` -ldrm
+DRI_LIB_DEPS = -L/usr/local/lib -lm -lpthread -lexpat $(LIBDRM_LIB)
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lXxf86vm -lm -lpthread $(LIBDRM_LIB)
+
+GLUT_LIB_DEPS = -L$(LIB_DIR) -L/usr/X11R6/lib -lGLU -lGL -lX11 -lXmu -lXt -lXi -lm
+GLW_LIB_DEPS = -L$(LIB_DIR) -L/usr/X11R6/lib -lGL -lXt -lXm -lX11
+
+
+# Directories
+SRC_DIRS = glx/x11 mesa glu glut/glx glw
+DRIVER_DIRS = dri
+PROGRAM_DIRS = 
+WINDOW_SYSTEM=dri
+
+DRM_SOURCE_PATH=$(TOP)/../drm
+
+# ffb and gamma are missing because they have not been converted to use the new
+# interface.
+DRI_DIRS = i810 i830 i915 mach64 mga r128 r200 r300 radeon tdfx \
+	   unichrome savage sis
+

configs/freebsd-dri-amd64

@@ -0,0 +1,10 @@
+# -*-makefile-*-
+# Configuration for freebsd-dri-amd64: FreeBSD DRI hardware drivers
+
+include $(TOP)/configs/freebsd-dri
+
+CONFIG_NAME = freebsd-dri-x86-64
+
+ASM_FLAGS = -DUSE_X86_64_ASM
+ASM_SOURCES = $(X86-64_SOURCES)
+ASM_API = $(X86-64_API)

configs/freebsd-dri-x86

@@ -0,0 +1,13 @@
+# -*-makefile-*-
+# Configuration for freebsd-dri: FreeBSD DRI hardware drivers
+
+include $(TOP)/configs/freebsd-dri
+
+CONFIG_NAME = freebsd-dri-x86
+
+# Unnecessary on x86, generally.
+PIC_FLAGS = 
+
+ASM_FLAGS = -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM
+ASM_SOURCES = $(X86_SOURCES)
+ASM_API = $(X86_API)

configs/hpux10

@@ -0,0 +1,14 @@
+# Configuration for HPUX v10, shared libs
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = hpux10
+
+# Compiler and flags
+CC = cc
+CXX = aCC
+
+CFLAGS = +O3 +DAportable +z -Aa -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM
+CXXFLAGS = +O3 +DAportable +Z -Aa -D_HPUX_SOURCE
+
+APP_LIB_DEPS = -$(LIB_DIR) -L/usr/lib/X11R6 -L/usr/contrib/X11R6/lib -lXext -lXmu -lXi -lX11 -lm

configs/hpux10-gcc

@@ -0,0 +1,16 @@
+# Configuration for HPUX v10, with gcc
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = hpux10-gcc
+
+# Compiler and flags
+CC = gcc
+CXX = g++
+
+CFLAGS = -ansi -O3 -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include  -DUSE_XSHM
+CXXFLAGS = -ansi -O3 -D_HPUX_SOURCE
+GLUT_CFLAGS = -fexceptions
+
+APP_LIB_DEPS = -L$(LIB_DIR) -L/usr/lib/X11R6 -L/usr/contrib/X11R6/lib -lXext -lXmu -lXi -lX11 -lm
+

configs/hpux10-static

@@ -0,0 +1,30 @@
+# Configuration for HPUX v10, static libs
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = hpux10-static
+
+# Compiler and flags
+CC = cc
+CXX = aCC
+
+CFLAGS = +O3 +DAportable +z -Aa -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM
+CXXFLAGS = +O3 +DAportable +Z -Aa -D_HPUX_SOURCE
+
+MKLIB_OPTIONS = -static
+
+# Library names (actual file names)
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a
+
+# Library/program dependencies (static libs don't have dependencies)
+GL_LIB_DEPS = 
+OSMESA_LIB_DEPS = 
+GLU_LIB_DEPS = 
+GLUT_LIB_DEPS = 
+GLW_LIB_DEPS = 
+APP_LIB_DEPS = -L$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXext -lXmu -lXt -lXi -lpthread -lm -lstdc++
+APP_LIB_DEPS = -L$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/lib/X11R6 -L/usr/contrib/X11R6/lib -lXext -lXmu -lXi -lX11 -lm -lstdc++

configs/hpux11-32

@@ -0,0 +1,26 @@
+# Configuration for HPUX v11
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = hpux11-32
+
+# Compiler and flags
+CC = cc
+CXX = aCC
+
+CFLAGS = +z -Ae +O2 +Onolimit +Oaggressive -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
+
+CXXFLAGS = +z -Aa +O2 +Onolimit +Oaggressive -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include
+
+MKLIB_OPTIONS =
+
+
+# Library names (actual file names)
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a
+
+# Library/program dependencies
+APP_LIB_DEPS = -L/usr/lib/X11R6 -L/usr/contrib/X11R6/lib -lXext -lXmu -lXi -lX11 -lm

configs/hpux11-32-static

@@ -0,0 +1,26 @@
+# Configuration for HPUX v11, static libs
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = hpux11-32-static
+
+# Compiler and flags
+CC = cc
+CXX = aCC
+
+CFLAGS = +O3 +DA2.0 -Aa -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
+
+CXXFLAGS = +O3 +DA2.0 -Aa -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include
+
+MKLIB_OPTIONS = -static
+
+
+# Library names (actual file names)
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a
+
+# Library/program dependencies
+APP_LIB_DEPS = -L/usr/lib/X11R6 -L/usr/contrib/X11R6/lib -lXext -lXmu -lXi -lX11 -lm

configs/hpux11-32-static-nothreads

@@ -0,0 +1,26 @@
+# Configuration for HPUX v11, static libs
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = hpux11-32-static
+
+# Compiler and flags
+CC = cc
+CXX = aCC
+
+CFLAGS = +O3 +DA2.0 -Aa -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM
+
+CXXFLAGS = +O3 +DA2.0 -Aa -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include
+
+MKLIB_OPTIONS = -static
+
+
+# Library names (actual file names)
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a
+
+# Library/program dependencies
+APP_LIB_DEPS = -L/usr/lib/X11R6 -L/usr/contrib/X11R6/lib -lXext -lXmu -lXi -lX11 -lm

configs/hpux11-64

@@ -0,0 +1,27 @@
+# Configuration for HPUX v11, 64-bit
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = hpux11-64
+
+# Compiler and flags
+CC = cc
+CXX = aCC
+
+CFLAGS = +z -Ae +DD64 +O2 +Onolimit +Oaggressive -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
+
+CXXFLAGS = +z -Aa +DD64 +O2 +Onolimit +Oaggressive -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include
+
+MKLIB_OPTIONS =
+
+LIBDIR = $(TOP)/lib64
+
+# Library names (actual file names)
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a
+
+# Library/program dependencies
+APP_LIB_DEPS = -L/usr/lib/X11R6 -L/usr/contrib/X11R6/lib -lXext -lXmu -lXi -lX11 -lm

configs/hpux11-64-static

@@ -0,0 +1,27 @@
+# Configuration for HPUX v11, 64-bit, static libs
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = hpux11-64-static
+
+# Compiler and flags
+CC = cc
+CXX = aCC
+
+CFLAGS = +O3 +DA2.0W -Aa -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
+
+CXXFLAGS = +O3 +DA2.0W -Aa -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include
+
+MKLIB_OPTIONS = -static
+
+LIBDIR = $(TOP)/lib64
+
+# Library names (actual file names)
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a
+
+# Library/program dependencies
+APP_LIB_DEPS = -L/usr/lib/X11R6 -L/usr/contrib/X11R6/lib -lXext -lXmu -lXi -lX11 -lm

configs/hpux9

@@ -0,0 +1,16 @@
+# Configuration for HPUX v9, shared libs
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = hpux9
+
+# Compiler and flags
+CC = cc
+# XXX fix this
+CXX = c++
+
+CFLAGS = +z +O3 +Olibcalls +ESlit -Aa +Onolimit -D_HPUX_SOURCE -I/usr/include/X11R5 -DUSE_XSHM
+CXXFLAGS = +z +O3 +Olibcalls +ESlit -Aa +Onolimit -D_HPUX_SOURCE -I/usr/include/X11R5
+
+APP_LIB_DEPS = -L$(LIB_DIR) -L/usr/lib/X11R5 -s -Wl,+s,-B,nonfatal,-B,immediate -lXext -lXmu -lXi -lX11 -lm
+

configs/hpux9-gcc

@@ -0,0 +1,14 @@
+# Configuration for HPUX v10, shared libs
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = hpux9-gcc
+
+# Compiler and flags
+CC = cc
+CXX = aCC
+
+CFLAGS = +O3 +DAportable +z -Aa -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM
+CXXFLAGS = +O3 +DAportable +Z -Aa -D_HPUX_SOURCE
+
+APP_LIB_DEPS = -L$(LIB_DIR) -L/usr/lib/X11R6 -L/usr/contrib/X11R6/lib -lXext -lXmu -lXi -lX11 -lm

configs/irix6-64

@@ -0,0 +1,18 @@
+# Configuration for IRIX 6.x, make n64 DSOs
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = irix6-64
+
+# Compiler and flags
+CC = cc
+CXX = CC
+CFLAGS = -64 -O3 -ansi -woff 1068,1069,1174,1185,1209,1474,1552 -DUSE_XSHM
+CXXFLAGS = -64 -O3 -ansi -woff 1174
+MKLIB_OPTIONS = -archopt 64
+
+GLW_SOURCES = GLwDrawA.c GLwMDrawA.c
+
+LIB_DIR = $(TOP)/lib64
+
+APP_LIB_DEPS = -L$(LIB_DIR) -64 -rpath $(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lX11 -lXmu -lXi -lm

configs/irix6-64-static

@@ -0,0 +1,25 @@
+# Configuration for IRIX 6.x, make n64 static libs
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = irix6-64-static
+
+# Compiler and flags
+CC = cc
+CXX = CC
+CFLAGS = -64 -O3 -ansi -woff 1068,1069,1174,1185,1209,1474,1552 -DUSE_XSHM
+CXXFLAGS = -64 -O3 -ansi -woff 1174
+MKLIB_OPTIONS = -archopt 64 -static
+
+GLW_SOURCES = GLwDrawA.c GLwMDrawA.c
+
+LIB_DIR = $(TOP)/lib64
+
+APP_LIB_DEPS = -L$(LIB_DIR) -64 -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lX11 -lXext -lXmu -lXi -lm
+
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a
+

configs/irix6-n32

@@ -0,0 +1,18 @@
+# Configuration for IRIX 6.x, make n32 DSOs
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = irix6-n32
+
+# Compiler and flags
+CC = cc
+CXX = CC
+CFLAGS = -n32 -mips3 -O3 -ansi -woff 1174,1521,1552 -DUSE_XSHM
+CXXFLAGS = -n32 -mips3 -O3 -ansi -woff 1174,1552
+MKLIB_OPTIONS = -archopt n32
+
+GLW_SOURCES = GLwDrawA.c GLwMDrawA.c
+
+LIB_DIR = $(TOP)/lib32
+
+APP_LIB_DEPS = -L$(LIB_DIR) -n32 -rpath $(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lX11 -lXmu -lXi -lfpe -lm

configs/irix6-n32-static

@@ -0,0 +1,25 @@
+# Configuration for IRIX 6.x, make n32 static libs
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = irix6-n32-static
+
+# Compiler and flags
+CC = cc
+CXX = CC
+CFLAGS = -n32 -mips2 -O2 -ansi -woff 1521,1552 -DUSE_XSHM
+CXXFLAGS = -n32 -mips2 -O2 -ansi -woff 3262,3666
+MKLIB_OPTIONS = -archopt n32 -static
+
+GLW_SOURCES = GLwDrawA.c GLwMDrawA.c
+
+LIB_DIR = $(TOP)/lib32
+
+APP_LIB_DEPS = -L$(LIB_DIR) -n32 -glut -l$(GLU_LIB) -l$(GL_LIB) -lX11 -lXext -lXmu -lXi -lm
+
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a
+

configs/irix6-o32

@@ -0,0 +1,19 @@
+# Configuration for IRIX 6.x, make o32 DSOs
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = irix6-o32
+
+# Compiler and flags
+CC = cc
+CXX = CC
+CFLAGS = -32 -mips2 -O2 -ansi -woff 1521,1552 -DUSE_XSHM
+CXXFLAGS = -32 -mips2 -O2 -ansi -woff 3262,3666
+MKLIB_OPTIONS = -archopt o32
+
+GLW_SOURCES = GLwDrawA.c GLwMDrawA.c
+
+LIB_DIR = $(TOP)/lib32
+
+APP_LIB_DEPS = -L$(LIB_DIR) -32 -rpath $(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lX11 -lXext -lXmu -lXi -lm
+

configs/irix6-o32-static

@@ -0,0 +1,25 @@
+# Configuration for IRIX 6.x, make o32 static libs
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = irix6-o32-static
+
+# Compiler and flags
+CC = cc
+CXX = CC
+CFLAGS = -32 -mips2 -O2 -ansi -woff 1521,1552 -DUSE_XSHM
+CXXFLAGS = -32 -mips2 -O2 -ansi -woff 3262,3666
+MKLIB_OPTIONS = -archopt o32 -static
+
+GLW_SOURCES = GLwDrawA.c GLwMDrawA.c
+
+LIB_DIR = $(TOP)/lib32
+
+APP_LIB_DEPS = -L$(LIB_DIR) -32 -glut -l$(GLU_LIB) -l$(GL_LIB) -lX11 -lXext -lXmu -lXi -lm
+
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a
+

configs/linux

@@ -0,0 +1,32 @@
+# Configuration for generic Linux
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = linux
+
+# Compiler and flags
+CC = gcc
+CXX = g++
+
+OPT_FLAGS  = -O3 -g
+PIC_FLAGS  = -fPIC
+
+# Add '-DGLX_USE_TLS' to ARCH_FLAGS to enable TLS support.  Add -m32
+# to build properly on 64-bit platforms.
+
+ARCH_FLAGS ?=
+
+DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
+	-D_BSD_SOURCE -DPTHREADS -DUSE_XSHM
+
+X11_INCLUDES = -I/usr/X11R6/include
+
+CFLAGS = -Wall -Wmissing-prototypes $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) \
+	$(DEFINES) $(ASM_FLAGS) $(X11_INCLUDES) -std=c99 -ffast-math 
+
+CXXFLAGS = -Wall $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \
+	$(X11_INCLUDES) 
+
+GLUT_CFLAGS = -fexceptions
+
+EXTRA_LIB_PATH = -L/usr/X11R6/lib

configs/linux-alpha

@@ -0,0 +1,18 @@
+# Configuration for Linux on Alpha
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = linux-alpha
+
+# Compiler and flags
+CC = gcc
+CXX = g++
+CFLAGS = -O3 -mcpu=ev5 -ansi -mieee -pedantic -fPIC -D_XOPEN_SOURCE -DUSE_XSHM
+CXXFLAGS = -O3 -mcpu=ev5 -ansi -mieee -pedantic -fPIC -D_XOPEN_SOURCE
+GLUT_CFLAGS = -fexceptions
+
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread
+GLUT_LIB_DEPS = -L$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
+GLW_LIB_DEPS = -L$(LIB_DIR) -l$(GL_LIB) -L/usr/X11R6/lib -lXt -lX11
+APP_LIB_DEPS = -L$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm
+

configs/linux-alpha-static

@@ -0,0 +1,27 @@
+# Configuration for Linux on Alpha, static libs
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = linux-alpha-static
+
+# Compiler and flags
+CC = gcc
+CXX = g++
+CFLAGS = -O3 -mcpu=ev5 -ansi -mieee -pedantic -D_XOPEN_SOURCE -DUSE_XSHM
+CXXFLAGS = -O3 -mcpu=ev5 -ansi -mieee -pedantic -D_XOPEN_SOURCE
+GLUT_CFLAGS = -fexceptions
+MKLIB_OPTIONS = -static
+
+
+# Library names (actual file names)
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a
+
+
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread
+GLUT_LIB_DEPS = -L$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
+GLW_LIB_DEPS = -L$(LIB_DIR) -l$(GL_LIB) -L/usr/X11R6/lib -lXt -lX11
+APP_LIB_DEPS = -L$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm -L/usr/X11R6/lib -lX11 -lm

configs/linux-debug

@@ -0,0 +1,8 @@
+# Configuration for debugging on Linux
+
+include $(TOP)/configs/linux
+
+CONFIG_NAME = linux-debug
+
+OPT_FLAGS = -g
+DEFINES += -DDEBUG -DDEBUG_MATH

configs/linux-directfb

@@ -0,0 +1,30 @@
+# Configuration for DirectFB
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = linux-directfb
+
+# Compiler and flags
+CC  = gcc
+CXX = g++
+
+CFLAGS   = -Wall -O3 -ffast-math -fPIC -std=c99 -D_GNU_SOURCE -D_POSIX_SOURCE -D_SVID_SOURCE \
+         -D_POSIX_C_SOURCE=199309L -D_BSD_SOURCE -DPTHREADS
+
+CXXFLAGS = -Wall -O3 -fPIC -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE   
+
+HAVE_X86 = $(shell uname -m | grep 'i[3-6]86' >/dev/null && echo yes)
+ifeq ($(HAVE_X86), yes)
+     CFLAGS   += -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM
+     CXXFLAGS += -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM
+     ASM_SOURCES = $(X86_SOURCES)
+     ASM_API = $(X86_API)
+endif
+
+# Directories
+SRC_DIRS     = mesa glu
+DRIVER_DIRS  = directfb
+PROGRAM_DIRS = # disabled
+
+# Library/program dependencies
+GL_LIB_DEPS  = -lm -lpthread

configs/linux-dri

@@ -0,0 +1,69 @@
+# -*-makefile-*-
+# Configuration for linux-dri: Linux DRI hardware drivers for XFree86 & others
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = linux-dri
+
+# Compiler and flags
+CC = gcc
+CXX = g++
+
+#MKDEP = /usr/X11R6/bin/makedepend
+#MKDEP = gcc -M
+#MKDEP_OPTIONS = -MF depend
+
+OPT_FLAGS  = -g
+PIC_FLAGS  = -fPIC
+
+# Add '-DGLX_USE_TLS' to ARCH_FLAGS to enable TLS support.
+ARCH_FLAGS ?=
+
+DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
+	-D_BSD_SOURCE -D_GNU_SOURCE \
+	-DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 -DIN_DRI_DRIVER \
+	-DGLX_DIRECT_RENDERING -DHAVE_ALIAS
+
+X11_INCLUDES = -I/usr/X11R6/include
+
+CFLAGS = -Wall -Wmissing-prototypes $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) \
+	$(DEFINES) $(ASM_FLAGS) -std=c99 -ffast-math 
+
+CXXFLAGS = -Wall $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
+
+
+ASM_SOURCES = 
+
+# Library/program dependencies
+EXTRA_LIB_PATH=-L/usr/X11R6/lib
+
+LIBDRM_LIB = `pkg-config --libs libdrm` -ldrm
+DRI_LIB_DEPS  = $(EXTRA_LIB_PATH) -lm -lpthread -lexpat -ldl $(LIBDRM_LIB)
+GL_LIB_DEPS   = $(EXTRA_LIB_PATH) -lX11 -lXext -lXxf86vm -lm -lpthread -ldl \
+                $(LIBDRM_LIB)
+
+
+# This is now 0 by default since it seems to confuse the hell out of people
+# and generate a lot of extra noise on bugzilla.  If you need to build with
+# EGL, do 'make linux-dri USING_EGL=1'
+
+USING_EGL=0
+
+# Directories
+ifeq ($(USING_EGL), 1)
+SRC_DIRS = egl glx/x11 mesa glu glut/glx glw
+PROGRAM_DIRS = egl
+else
+SRC_DIRS = glx/x11 mesa glu glut/glx glw
+PROGRAM_DIRS =
+endif
+
+DRIVER_DIRS = dri
+WINDOW_SYSTEM=dri
+
+# gamma are missing because they have not been converted to use the new
+# interface.
+DRI_DIRS = i810 i915 mach64 mga r128 r200 r300 radeon s3v \
+	savage sis tdfx trident unichrome ffb
+
+DRI_DIRS = i915 

configs/linux-dri-ppc

@@ -0,0 +1,17 @@
+# -*-makefile-*-
+# Configuration for linux-dri: Linux DRI hardware drivers for XFree86 & others
+
+include $(TOP)/configs/linux-dri
+
+CONFIG_NAME = linux-dri-ppc
+
+OPT_FLAGS = -Os -mcpu=603
+PIC_FLAGS = -fPIC
+
+ASM_FLAGS = -DUSE_PPC_ASM -DUSE_VMX_ASM
+ASM_SOURCES = $(PPC_SOURCES)
+
+# Build only the drivers for cards that exist on PowerPC.  At some point MGA
+# will be added, but not yet.
+DRI_DIRS = mach64 r128 r200 r300 radeon tdfx
+

configs/linux-dri-x86

@@ -0,0 +1,17 @@
+# -*-makefile-*-
+# Configuration for linux-dri: Linux DRI hardware drivers for XFree86 & others
+
+include $(TOP)/configs/linux-dri
+
+CONFIG_NAME = linux-dri-x86
+
+# Unnecessary on x86, generally.
+PIC_FLAGS = 
+
+# Add -m32 to CFLAGS:
+ARCH_FLAGS = -m32
+
+ASM_FLAGS = -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM
+ASM_SOURCES = $(X86_SOURCES)
+ASM_API = $(X86_API)
+

configs/linux-dri-x86-64

@@ -0,0 +1,24 @@
+# -*-makefile-*-
+# Configuration for linux-dri: Linux DRI hardware drivers for XFree86 & others
+
+include $(TOP)/configs/linux-dri
+
+CONFIG_NAME = linux-dri-x86-64
+
+ARCH_FLAGS = -m64
+
+ASM_FLAGS = -DUSE_X86_64_ASM
+ASM_SOURCES = $(X86-64_SOURCES)
+ASM_API = $(X86-64_API)
+
+LIB_DIR = $(TOP)/lib64
+
+# Library/program dependencies
+EXTRA_LIB_PATH=-L/usr/X11R6/lib64
+
+# ffb, gamma, and sis are missing because they have not be converted to use
+# the new interface.  i810 and i830 are missing because there is no x86-64
+# system where they could *ever* be used.
+#
+DRI_DIRS = i915 mach64 mga r128 r200 radeon tdfx unichrome savage r300
+

configs/linux-fbdev

@@ -0,0 +1,10 @@
+# Configuration for Linux fbdev interface
+
+include $(TOP)/configs/linux
+
+CONFIG_NAME = linux-fbdev
+DRIVER_DIRS = fbdev
+
+CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS -DUSE_GLFBDEV_DRIVER
+
+PROGRAM_DIRS = fbdev

configs/linux-glide

@@ -0,0 +1,20 @@
+# Configuration for generic Linux with 3Dfx Glide driver
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = linux-glide
+
+# Compiler and flags
+CC = gcc
+CXX = g++
+
+CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS -I/usr/X11R6/include -DFX -I/usr/include/glide -I/usr/local/glide/include
+CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
+GLUT_CFLAGS = -fexceptions
+
+
+# Library/program dependencies
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -L/usr/local/glide/lib -lglide3x -lm -lpthread
+GLUT_LIB_DEPS = -L$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
+GLW_LIB_DEPS = -L$(LIB_DIR) -l$(GL_LIB) -L/usr/X11R6/lib -lXt -lX11
+APP_LIB_DEPS = -L$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/local/glide/lib -lglide3x -lm

configs/linux-icc

@@ -0,0 +1,22 @@
+# Configuration for Linux with Intel C compiler
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = linux-icc
+
+# Compiler and flags
+CC = icc
+CXX = g++
+CFLAGS = -O3 -tpp6 -axK -KPIC -D_GCC_LIMITS_H_ -D__GNUC__ -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM -DPTHREADS -I/usr/X11R6/include
+CXXFLAGS = -O3
+GLUT_CFLAGS = -fexceptions
+MKLIB_OPTIONS = -arch icc
+
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread
+GLUT_LIB_DEPS = -L$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
+APP_LIB_DEPS = -L$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm
+
+ASM_SOURCES = $(X86_SOURCES)
+ASM_API = $(X86_API)
+
+

configs/linux-icc-static

@@ -0,0 +1,30 @@
+# Configuration for Linux with Intel C compiler, static libs
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = linux-icc-static
+
+# Compiler and flags
+CC = icc
+CXX = g++
+CFLAGS = -O3 -tpp6 -axK -D_GCC_LIMITS_H_ -D__GNUC__ -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM -DPTHREADS -I/usr/X11R6/include
+CXXFLAGS = -O3
+GLUT_CFLAGS = -fexceptions
+MKLIB_OPTIONS = -static -arch icc
+
+# Library names (actual file names)
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a
+
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread
+GLUT_LIB_DEPS = -L$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
+APP_LIB_DEPS = -L$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
+MKLIB_OPTIONS = -arch icc
+
+ASM_SOURCES = $(X86_SOURCES)
+ASM_API = $(X86_API)
+
+

configs/linux-indirect

@@ -0,0 +1,49 @@
+# -*-makefile-*-
+# Configuration for linux-indirect: Builds a libGL capable of indirect
+# rendering, but *NOT* capable of direct rendering.
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = linux-dri
+
+# Compiler and flags
+CC = gcc
+CXX = g++
+
+MKDEP = /usr/X11R6/bin/makedepend
+#MKDEP = gcc -M
+#MKDEP_OPTIONS = -MF depend
+
+WARN_FLAGS = -Wall
+OPT_FLAGS  = -O -g
+PIC_FLAGS  = -fPIC
+
+# Add '-DGLX_USE_TLS' to ARCH_FLAGS to enable TLS support.
+ARCH_FLAGS ?=
+
+DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
+	-D_BSD_SOURCE -D_GNU_SOURCE \
+	-DPTHREADS -DHAVE_ALIAS
+
+X11_INCLUDES = -I/usr/X11R6/include
+
+CFLAGS   = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \
+	$(ASM_FLAGS) -std=c99 -ffast-math 
+
+CXXFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
+
+
+ASM_SOURCES = 
+
+# Library/program dependencies
+EXTRA_LIB_PATH=-L/usr/X11R6/lib
+
+DRI_LIB_DEPS  = $(EXTRA_LIB_PATH) -lm -lpthread -lexpat -ldl
+GL_LIB_DEPS   = $(EXTRA_LIB_PATH) -lX11 -lXext -lXxf86vm -lm -lpthread -ldl
+
+
+# Directories
+SRC_DIRS = glx/x11 glu glut/glx glw
+DRIVER_DIRS =
+PROGRAM_DIRS = 
+WINDOW_SYSTEM=dri

configs/linux-osmesa16

@@ -0,0 +1,27 @@
+# Configuration for 16 bits/channel OSMesa library on Linux
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = linux-osmesa16
+
+# Compiler and flags
+CC = gcc
+CXX = g++
+CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS -I/usr/X11R6/include -DCHAN_BITS=16 -DDEFAULT_SOFTWARE_DEPTH_BITS=31
+CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
+
+
+# Library names
+OSMESA_LIB = OSMesa16
+OSMESA_LIB_NAME = libOSMesa16.so
+
+
+# Directories
+SRC_DIRS = mesa glu
+DRIVER_DIRS = osmesa
+PROGRAM_DIRS = 
+
+
+# Dependencies
+OSMESA_LIB_DEPS = -lm -lpthread
+APP_LIB_DEPS = -lOSMesa16

configs/linux-osmesa16-static

@@ -0,0 +1,28 @@
+# Configuration for 16 bits/channel OSMesa library on Linux
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = linux-osmesa16-static
+
+# Compiler and flags
+CC = gcc
+CXX = g++
+CFLAGS = -O3 -ansi -pedantic -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS -I/usr/X11R6/include -DCHAN_BITS=16 -DDEFAULT_SOFTWARE_DEPTH_BITS=31
+CXXFLAGS = -O3 -ansi -pedantic -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
+MKLIB_OPTIONS = -static
+
+
+# Library names
+OSMESA_LIB = OSMesa16
+OSMESA_LIB_NAME = libOSMesa16.a
+
+
+# Directories
+SRC_DIRS = mesa glu
+DRIVER_DIRS = osmesa
+PROGRAM_DIRS = 
+
+
+# Dependencies
+OSMESA_LIB_DEPS = -lm -lpthread
+APP_LIB_DEPS = -lOSMesa16

configs/linux-osmesa32

@@ -0,0 +1,27 @@
+# Configuration for 32 bits/channel OSMesa library on Linux
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = linux-osmesa32
+
+# Compiler and flags
+CC = gcc
+CXX = g++
+CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS -I/usr/X11R6/include -DCHAN_BITS=32 -DDEFAULT_SOFTWARE_DEPTH_BITS=31
+CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
+
+
+# Library names
+OSMESA_LIB = OSMesa32
+OSMESA_LIB_NAME = libOSMesa32.so
+
+
+# Directories
+SRC_DIRS = mesa glu
+DRIVER_DIRS = osmesa
+PROGRAM_DIRS = 
+
+
+# Dependencies
+OSMESA_LIB_DEPS = -lm -lpthread
+APP_LIB_DEPS = -lOSMesa32

configs/linux-ppc

@@ -0,0 +1,9 @@
+# Configuration for Linux on PPC
+
+include $(TOP)/configs/linux
+
+CONFIG_NAME = linux-ppc
+
+OPT_FLAGS = -O3 -mcpu=603 -fsigned-char -funroll-loops
+
+# FIXME: Use of PowerPC assembly should be enabled here.

configs/linux-ppc-static

@@ -0,0 +1,14 @@
+# Configuration for Linux on PPC, static libs
+
+include $(TOP)/configs/linux-ppc
+
+CONFIG_NAME = linux-ppc-static
+
+MKLIB_OPTIONS = -static
+
+# Library names (actual file names)
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a

configs/linux-profile

@@ -0,0 +1,29 @@
+# Configuration for profiling on Linux with gprof
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = linux-profile
+
+# Compiler and flags
+CC = gcc
+CXX = g++
+
+CFLAGS = -pg -O -ansi -pedantic -Wall -Wmissing-prototypes -Wundef -fPIC -ffast-math -D_POSIX_SOURCE -D_SVID_SOURCE -D_BSD_SOURCE -I/usr/X11R6/include -DUSE_XSHM -DPTHREADS -DDEBUG
+
+CXXFLAGS = -pg -O -ansi -pedantic -Wall -Wundef -fPIC -ffast-math -D_POSIX_SOURCE -D_SVID_SOURCE -D_BSD_SOURCE -DDEBUG
+
+GLUT_CFLAGS = -fexceptions
+
+# Need to have -L/usr/X11R6/lib in these:
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread
+GLUT_LIB_DEPS = -L$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
+GLW_LIB_DEPS = -L$(LIB_DIR) -l$(GL_LIB) -lXt -L/usr/X11R6/lib -lX11
+
+# Need to make static libs for profiling:
+MKLIB_OPTIONS = -static
+GL_LIB_NAME = lib$(GL_LIB).a
+GLU_LIB_NAME = lib$(GLU_LIB).a
+GLUT_LIB_NAME = lib$(GLUT_LIB).a
+GLW_LIB_NAME = lib$(GLW_LIB).a
+OSMESA_LIB_NAME = lib$(OSMesa).a
+APP_LIB_DEPS = -L$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm -lpthread

configs/linux-solo

@@ -0,0 +1,43 @@
+# Configuration for linux-solo: Linux DRI hardware drivers for fbdev
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = linux-solo
+
+# Compiler and flags
+CC = gcc
+CXX = g++
+
+WARN_FLAGS = -Wall -Wundef
+OPT_FLAGS  = -O3 -g
+PIC_FLAGS  = -fPIC
+
+# Add '-DGLX_USE_TLS' to ARCH_FLAGS to enable TLS support.
+ARCH_FLAGS ?=
+
+DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
+	-D_BSD_SOURCE -D_GNU_SOURCE \
+	-DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 -DDRM_USE_MALLOC -DIN_DRI_DRIVER
+
+CFLAGS   = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \
+	$(ASM_FLAGS) -std=c99 -ffast-math 
+
+CXXFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
+
+
+ASM_SOURCES = 
+
+# Library/program dependencies
+DRI_LIB_DEPS = -lm -lpthread -lexpat -ldl -L$(LIB_DIR) 
+GL_LIB_DEPS = -lm -lpthread -ldl
+GLU_LIB_DEPS = -L$(LIB_DIR) -l$(GL_LIB) -lm
+GLUT_LIB_DEPS = -L$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -lm
+APP_LIB_DEPS = -L$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm -lpthread
+
+# Directories
+SRC_DIRS = glx/mini mesa glu glut/mini
+DRIVER_DIRS = dri
+PROGRAM_DIRS = miniglx
+
+#DRI_DIRS = ffb gamma sis savage
+DRI_DIRS = i810 i830 i915 mach64 mga r128 r200 radeon tdfx unichrome fb

configs/linux-solo-ia64

@@ -0,0 +1,7 @@
+# Configuration for linux-solo-ia64: Linux DRI hardware drivers for fbdev
+
+include $(TOP)/configs/linux-solo
+
+CONFIG_NAME = linux-solo-ia64
+
+DRI_DIRS = fb mach64 mga r128 r200 radeon sis tdfx unichrome

configs/linux-solo-x86

@@ -0,0 +1,13 @@
+# -*-makefile-*-
+# Configuration for linux-solo-x86: Linux hardware drivers for fbdev for x86
+
+include $(TOP)/configs/linux-solo
+
+CONFIG_NAME = linux-solo-x86
+
+# Unnecessary on x86, generally.
+PIC_FLAGS = 
+
+ASM_FLAGS = -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM
+ASM_SOURCES = $(X86_SOURCES)
+ASM_API = $(X86_API)

configs/linux-sparc

@@ -0,0 +1,30 @@
+# Configuration for Linux on Sparc
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = linux-sparc
+
+# Compiler and flags
+CC = gcc
+CXX = g++
+
+WARN_FLAGS = -Wall
+OPT_FLAGS  = -O2
+PIC_FLAGS  = -fPIC
+
+DEFINES = -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM
+
+X11_INCLUDES = -I/usr/X11R6/include
+
+CFLAGS   = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \
+	$(ASM_FLAGS) -std=c99 -ffast-math 
+
+CXXFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
+
+GLUT_CFLAGS = -fexceptions
+
+EXTRA_LIB_PATH=-L/usr/X11R6/lib
+
+GL_LIB_DEPS = $(EXTRA_LIB_PATH) -lX11 -lXext -lm -lpthread
+GLUT_LIB_DEPS = -L$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) $(EXTRA_LIB_PATH) -lX11 -lXmu -lXt -lXi -lm
+GLW_LIB_DEPS = -L$(LIB_DIR) -l$(GL_LIB) $(EXTRA_LIB_PATH) -lXt -lX11

configs/linux-sparc5

@@ -0,0 +1,17 @@
+# Configuration for Linux on Sparc5
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = linux-sparc5
+
+# Compiler and flags
+CC = gcc
+CXX = g++
+CFLAGS = -mcpu=ultrasparc -O2 -ffast-math -ansi -pedantic -fPIC -D_SVID_SOURCE -D_BSD_SOURCE -I/usr/X11R6/include -DUSE_XSHM
+CXXFLAGS = -mcpu=ultrasparc -O2 -ffast-math -ansi -pedantic -fPIC -D_SVID_SOURCE -D_BSD_SOURCE
+GLUT_CFLAGS = -fexceptions
+
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread
+GLUT_LIB_DEPS = -L$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
+GLW_LIB_DEPS = -L$(LIB_DIR) -l$(GL_LIB) -L/usr/X11R6/lib -lXt -lX11
+

configs/linux-static

@@ -0,0 +1,21 @@
+# Configuration for generic Linux, making static libs
+
+include $(TOP)/configs/linux
+
+CONFIG_NAME = linux-static
+
+MKLIB_OPTIONS = -static
+
+# Library names (actual file names)
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a
+
+# Library/program dependencies (static libs don't have dependencies)
+GL_LIB_DEPS = 
+OSMESA_LIB_DEPS = 
+GLU_LIB_DEPS = 
+GLUT_LIB_DEPS = 
+GLW_LIB_DEPS = 

configs/linux-ultrasparc

@@ -0,0 +1,17 @@
+# Configuration for Linux on UltraSparc
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = linux-ultrasparc
+
+# Compiler and flags
+CC = gcc
+CXX = g++
+CFLAGS = -mv8 -O2 -mtune=ultrasparc -ansi -pedantic -fPIC -D_SVID_SOURCE -D_BSD_SOURCE -I/usr/X11R6/include -DUSE_XSHM
+CXXFLAGS = -mv8 -O2 -mtune=ultrasparc -ansi -pedantic -fPIC -D_SVID_SOURCE -D_BSD_SOURCE
+GLUT_CFLAGS = -fexceptions
+
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread
+GLUT_LIB_DEPS = -L$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
+GLW_LIB_DEPS = -L$(LIB_DIR) -l$(GL_LIB) -L/usr/X11R6/lib -lXt -lX11
+APP_LIB_DEPS = -L$(LIB_DIR)-l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm

configs/linux-x86

@@ -0,0 +1,9 @@
+# Configuration for Linux with x86 optimizations
+
+include $(TOP)/configs/linux
+
+CONFIG_NAME = linux-x86
+
+ASM_FLAGS = -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM
+ASM_SOURCES = $(X86_SOURCES)
+ASM_API = $(X86_API)

configs/linux-x86-32

@@ -0,0 +1,7 @@
+# To build Linux x86 32-bit in an x86-64 environment
+
+include $(TOP)/configs/linux-x86
+
+CONFIG_NAME = linux-x86-32
+
+ARCH_FLAGS += -m32

configs/linux-x86-64

@@ -0,0 +1,14 @@
+# Configuration for Linux for 64-bit X86 (Opteron)
+
+include $(TOP)/configs/linux
+
+CONFIG_NAME = linux-x86-64
+
+ARCH_FLAGS = -m64
+
+ASM_SOURCES = $(X86-64_SOURCES)
+ASM_API = $(X86-64_API)
+ASM_FLAGS = -DUSE_X86_64_ASM
+
+LIB_DIR = $(TOP)/lib64
+EXTRA_LIB_PATH = -L/usr/X11R6/lib64

configs/linux-x86-64-debug

@@ -0,0 +1,7 @@
+# Configuration for Linux for 64-bit X86 (Opteron)
+
+include $(TOP)/configs/linux-x86-64
+
+CONFIG_NAME = linux-x86-64-debug
+
+DEFINES += -DDEBUG -DDEBUG_MATH

configs/linux-x86-64-static

@@ -0,0 +1,21 @@
+# Configuration for Linux for 64-bit X86 (Opteron), static libs
+
+include $(TOP)/configs/linux-x86-64
+
+CONFIG_NAME = linux-x86-64-static
+
+MKLIB_OPTIONS = -static
+
+# Library names (actual file names)
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a
+
+# Library/program dependencies (static libs don't have dependencies)
+GL_LIB_DEPS = 
+OSMESA_LIB_DEPS = 
+GLU_LIB_DEPS = 
+GLUT_LIB_DEPS = 
+GLW_LIB_DEPS = 

configs/linux-x86-debug

@@ -0,0 +1,9 @@
+# Configuration for Linux with x86 code, but no gcc optimizations and 
+# debugging enabled.
+
+include $(TOP)/configs/linux-x86
+
+CONFIG_NAME = linux-x86-debug
+
+OPT_FLAGS = -g
+DEFINES += -DDEBUG -DDEBUG_MATH

configs/linux-x86-glide

@@ -0,0 +1,25 @@
+# Configuration for Linux with 3Dfx Glide driver and x86 optimizations
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = linux-x86-glide
+
+# Compiler and flags
+CC = gcc
+CXX = g++
+
+CFLAGS = -Wall -O3 -ansi -pedantic -fPIC -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM -DPTHREADS -I/usr/X11R6/include -DFX -I/usr/include/glide -I/usr/local/glide/include
+
+CXXFLAGS = -Wall -O3 -ansi -pedantic -fPIC -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
+
+GLUT_CFLAGS = -fexceptions
+
+
+ASM_SOURCES = $(X86_SOURCES)
+ASM_API = $(X86_API)
+
+# Library/program dependencies
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -L/usr/local/glide/lib -lglide3x -lm -lpthread
+GLUT_LIB_DEPS = -L$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
+GLW_LIB_DEPS = -L$(LIB_DIR) -l$(GL_LIB) -L/usr/X11R6/lib -lXt -lX11
+APP_LIB_DEPS = -L$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/local/glide/lib -lglide3x -lm

configs/linux-x86-static

@@ -0,0 +1,21 @@
+# Configuration for Linux with x86 optimizations, static libs
+
+include $(TOP)/configs/linux-x86
+
+CONFIG_NAME = linux-x86-static
+
+MKLIB_OPTIONS = -static
+
+# Library names (actual file names)
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a
+
+# Library/program dependencies (static libs don't have dependencies)
+GL_LIB_DEPS = 
+OSMESA_LIB_DEPS = 
+GLU_LIB_DEPS = 
+GLUT_LIB_DEPS = 
+GLW_LIB_DEPS = 

configs/linux-x86-xcb

@@ -0,0 +1,25 @@
+# Configuration for Linux with x86 optimizations
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = linux-x86-xcb
+
+# Compiler and flags
+CC = gcc
+CXX = g++
+
+CFLAGS = -Wall -O3 -ansi -pedantic -fPIC -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM -DPTHREADS -DUSE_XCB -I/usr/X11R6/include
+
+CXXFLAGS = -Wall -O3 -ansi -pedantic -fPIC -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XCB
+
+GLUT_CFLAGS = -fexceptions
+
+
+ASM_SOURCES = $(X86_SOURCES)
+ASM_API = $(X86_API)
+
+# Library/program dependencies
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread -lXCB
+GLUT_LIB_DEPS = -L$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
+GLW_LIB_DEPS = -L$(LIB_DIR) -l$(GL_LIB) -L/usr/X11R6/lib -lXt -lX11
+APP_LIB_DEPS = -L$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm

configs/netbsd

@@ -0,0 +1,14 @@
+# Configuration for NetBSD
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = netbsd
+
+# Compiler and flags
+CC = gcc
+CXX = g++
+CFLAGS = -O2 -fPIC -DUSE_XSHM -I/usr/X11R6/include -DHZ=100
+CXXFLAGS = -O2 -fPIC
+GLUT_CFLAGS = -fexceptions
+APP_LIB_DEPS = -L$(LIB_DIR) -L/usr/X11R6/lib -lXext -lXmu -lXi -lX11 -lm
+

configs/openbsd

@@ -0,0 +1,18 @@
+# Configuration for OpenBSD
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = openbsd
+
+# Compiler and flags
+CC = gcc
+CXX = g++
+CFLAGS = -O2 -fPIC -I/usr/X11R6/include -DUSE_XSHM -DHZ=100
+CXXFLAGS = -O2 -fPIC -I/usr/X11R6/include -DHZ=100
+
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm
+OSMESA_LIB_DEPS = -lm
+GLU_LIB_DEPS = -L$(LIB_DIR) -l$(GL_LIB)
+GLUT_LIB_DEPS = -L$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXext -lXmu -lXt -lXi -lm
+APP_LIB_DEPS = -L$(LIB_DIR) -L/usr/X11R6/lib -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm
+

configs/osf1

@@ -0,0 +1,16 @@
+# Configuration for OSF/1
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = osf1
+
+# Compiler and flags
+CC = cc
+CXX = cxx
+CFLAGS = -O0 -std1 -ieee_with_no_inexact -DUSE_XSHM
+CXXFLAGS = -O2 -std ansi -ieee
+
+GL_LIB_DEPS = -lX11 -lXext -lm -lpthread
+GLU_LIB_DEPS = -L$(LIB_DIR) -l$(GL_LIB) -lm
+GLUT_LIB_DEPS = -L$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -lX11 -lXmu -lXt -lXi -lm
+APP_LIB_DEPS = -L$(LIB_DIR) -L$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lX11 -lXext -lXmu -lXi -lm

configs/solaris-x86

@@ -0,0 +1,18 @@
+# Configuration for Solaris on x86
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = solaris-x86
+
+# Compiler and flags
+CC = cc
+CFLAGS = -Xa -xO3 -xpentium -KPIC -I/usr/openwin/include -DUSE_XSHM
+MKLIB_OPTIONS = -static
+
+APP_LIB_DEPS = -L$(LIB_DIR) -L/usr/openwin/lib -R/usr/openwin/lib -lX11 -lXext -lXmu -lXi -lm -lglut -lGLU -lGL
+
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a

configs/solaris-x86-gcc

@@ -0,0 +1,24 @@
+# Configuration for Solaris on x86 with gcc, static libs
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = solaris-x86-gcc
+
+# Compiler and flags
+CC = gcc
+CXX = g++
+CFLAGS = -O3 -m486 -fPIC -I/usr/openwin/include -DUSE_XSHM
+CXXFLAGS = -O3 -m486 -fPIC
+GLUT_CFLAGS = -fexceptions
+MKLIB_OPTIONS = -static
+
+GL_LIB_DEPS = -L/usr/openwin/lib -lX11 -lXext -lm -lpthread
+GLU_LIB_DEPS = -L$(LIB_DIR) -l$(GL_LIB) -lm
+GLUT_LIB_DEPS = -L$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/openwin/lib -lX11 -lXmu -lXt -lXi -lm
+APP_LIB_DEPS = -L$(LIB_DIR) -L/usr/openwin/lib -R/usr/openwin/lib -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm
+
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a

configs/sunos4

@@ -0,0 +1,12 @@
+# Configuration for SunOS 4, shared libs
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = sunos4
+
+# Compiler and flags
+CC = acc
+CFLAGS = -Kpic -O -I/usr/include/X11R5 -DUSE_XSHM -DSUNOS4
+APP_LIB_DEPS = -L$(LIB_DIR) -L/usr/lib/X11R5 -lX11 -lXext -lXmu -lXi -lm
+
+

configs/sunos4-gcc

@@ -0,0 +1,15 @@
+# Configuration for SunOS 4, with gcc, shared libs
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = sunos4-gcc
+
+# Compiler and flags
+CC = gcc
+CXX = g++
+CFLAGS = -fPIC -O3 -I/usr/openwin/include -I/usr/include/X11R5 -I/usr/include/X11R5 -DUSE_XSHM -DSUNOS4
+CXXFLAGS = -fPIC -O3 -I/usr/openwin/include -DSUNOS4
+GLUT_CFLAGS = -fexceptions -DSOLARIS_2_4_BUG
+
+APP_LIB_DEPS = -L$(LIB_DIR) -L/usr/openwin/lib -lX11 -lXext -lXmu -lXi -lm
+

configs/sunos4-static

@@ -0,0 +1,25 @@
+# Configuration for SunOS 4, static libs
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = sunos4-static
+
+# Compiler and flags
+CC = acc
+CFLAGS = -O -DUSE_XSHM -DSUNOS4
+MKLIB_OPTIONS = -static
+
+# Library names (actual file names)
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a
+
+# Library/program dependencies (static libs don't have dependencies)
+GL_LIB_DEPS = 
+OSMESA_LIB_DEPS = 
+GLU_LIB_DEPS = 
+GLUT_LIB_DEPS = 
+GLW_LIB_DEPS = 
+APP_LIB_DEPS = -L$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXext -lXmu -lXt -lXi -lpthread -lm

configs/sunos5

@@ -0,0 +1,18 @@
+# Configuration for SunOS 5
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = sunos5
+
+# Compiler and flags
+CC = cc
+CXX = c++
+CFLAGS = -KPIC -Xa -O -I/usr/openwin/include -I/usr/dt/include -DUSE_XSHM
+CXXFLAGS = -KPIC -Xa -O -I/usr/openwin/include -I/usr/dt/include
+GLUT_CFLAGS = -DSOLARIS_2_4_BUG
+
+GL_LIB_DEPS = -L/usr/openwin/lib -L/usr/dt/lib -lX11 -lXext -lXmu -lXi -lm
+GLU_LIB_DEPS = -L$(LIB_DIR) -l$(GL_LIB) -lm
+GLUT_LIB_DEPS = -L$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -lm
+GLW_LIB_DEPS = -L$(LIB_DIR) -l$(GL_LIB) -L/usr/openwin/lib -lXt -lX11
+APP_LIB_DEPS = -L$(LIB_DIR) -lCrun -lX11 -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm

configs/sunos5-gcc

@@ -0,0 +1,36 @@
+# Configuration for SunOS 5, with gcc
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = sunos5-gcc
+
+# Compiler and flags
+CC = gcc
+CXX = g++
+
+WARN_FLAGS = -Wall
+OPT_FLAGS  = -O3 -g -fomit-frame-pointer -pipe
+PIC_FLAGS  = -fPIC
+
+ARCH_FLAGS ?=
+
+DEFINES = -D_REENTRANT -DUSE_XSHM
+
+ASM_SOURCES = $(SPARC_SOURCES)
+ASM_API = $(SPARC_API)
+ASM_FLAGS = -DUSE_SPARC_ASM
+
+CFLAGS   = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \
+	$(ASM_FLAGS) -std=c99 -ffast-math -I/usr/openwin/include
+
+CXXFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \
+	-I/usr/openwin/include
+
+GLUT_CFLAGS = -fexceptions -DSOLARIS_2_4_BUG
+
+# Library/program dependencies
+EXTRA_LIB_PATH=-L/usr/openwin/lib
+
+GL_LIB_DEPS = $(EXTRA_LIB_PATH) -lX11 -lXext -lXmu -lXi -lm
+GLUT_LIB_DEPS = -L$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -lm
+APP_LIB_DEPS = -L$(LIB_DIR) -lX11 -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm

configs/sunos5-smp

@@ -0,0 +1,19 @@
+# Configuration for SunOS 5, SMP systems
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = sunos5-smp
+
+# Compiler and flags
+CC = cc
+CXX = c++
+CFLAGS = -KPIC -Xa -native -fast -xO5 -xlibmil -xsafe=mem -xdepend -I/usr/openwin/include -I/usr/dt/include -DUSE_XSHM -DSOLARIS_2_4_BUG
+CXXFLAGS = -KPIC -Xa -native -fast -xO5 -xlibmil -xsafe=mem -xdepend -I/usr/openwin/include -I/usr/dt/include
+GLUT_CFLAGS = -DSOLARIS_2_4_BUG
+
+GL_LIB_DEPS = -L/usr/openwin/lib -lX11 -lXext -lXmu -lXi -lm
+GLU_LIB_DEPS = -L$(LIB_DIR) -l$(GL_LIB) -lm
+GLUT_LIB_DEPS = -L$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -lm
+GLW_LIB_DEPS = -L$(LIB_DIR) -l$(GL_LIB) -L/usr/openwin/lib -lXt -lX11
+APP_LIB_DEPS = -L$(LIB_DIR) -lX11 -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm -lCrun
+

configs/ultrix-gcc

@@ -0,0 +1,21 @@
+# Configuration for Ultrix, with gcc
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = ultrix-gcc
+
+# Compiler and flags
+CC = gcc
+CXX = g++
+CFLAGS = -pedantic -O2
+CXXFLAGS = -pedantic -O2
+GLUT_CFLAGS = -fexceptions
+MKLIB_OPTIONS = -static
+
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a
+
+APP_LIB_DEPS = -L$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lXmu -lX11 -lXi -lm

descrip.mms

@@ -0,0 +1,22 @@
+# Makefile for Mesa for VMS
+# contributed by Jouk Jansen  joukj@hrem.stm.tudelft.nl
+
+macro : 
+        @ macro=""
+.ifdef NOSHARE
+.else
+	@ if f$getsyi("HW_MODEL") .ge. 1024 then macro= "/MACRO=(SHARE=1)"
+.endif
+	$(MMS)$(MMSQUALIFIERS)'macro' all
+
+all :
+	if f$search("lib.dir") .eqs. "" then create/directory [.lib]
+	set default [.src]
+	$(MMS)$(MMSQUALIFIERS)
+	set default [-.progs.util]
+	$(MMS)$(MMSQUALIFIERS)
+	set default [-.demos]
+	$(MMS)$(MMSQUALIFIERS)
+	set default [-.xdemos]
+	$(MMS)$(MMSQUALIFIERS)
+	if f$search("[-]test.DIR") .nes. "" then pipe set default [-.test] ; $(MMS)$(MMSQUALIFIERS)

docs/ARB_color_buffer_float.txt

@@ -1,4 +0,0 @@
-Known issues in the ARB_color_buffer_float implementation:
-- Rendering to multiple render targets, some fixed-point, some floating-point, with FIXED_ONLY fragment clamping and polygon smooth enabled may write incorrect values to the fixed point buffers (depends on spec interpretation)
-- For fragment programs with ARB_fog_* options, colors are clamped before fog application regardless of the fragment clamping setting (this depends on spec interpretation)
-