Compare commits

..

150 Commits

Author SHA1 Message Date
Dylan Baker
4c8bd415b4 VERSION: bump for 19.3.0 final 2019-12-12 11:21:58 -08:00
Dylan Baker
9e8aaa6f18 docs: add release notes for 19.3.0 2019-12-12 11:21:43 -08:00
Dylan Baker
a857bc66dc Revert "egl: move #include of local headers out of Khronos headers"
This reverts commit 87efb9f3a4.

This is breaking the QT build, so it needs to go until these symbols can
make their way to upstream khronos
2019-12-12 09:24:42 -08:00
Dylan Baker
e0da018907 Revert "egl: avoid local modifications for eglext.h Khronos standard header file"
This reverts commit 2a497735ec.

This patch is built on the previous patch, which needs to be reverted.
2019-12-12 09:23:54 -08:00
Lionel Landwerlin
ce856a7392 anv: fix incorrect VMA alignment for CCS main surfaces
Maybe finer way of dealing with this requirement would be to increase
the number of pdevice->memory.types[] to add a category for special
alignment cases.

Meanwhile this fixes the problem of CCS surface alignment and it's
probably not going to cause issues given the size of our address
space.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 6af8a4acc4 ("anv: Add aux-map translation for gen12+")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 5fdea9f401)
2019-12-12 09:22:54 -08:00
Samuel Pitoiset
3a58a73661 ac/nir: fix out-of-bound access when loading constants from global
Global load/store instructions can't know if the offset is
out-of-bound because they don't use descriptors (no range).

Fix this by clamping the offset for arrays that are indexed
with a non-constant offset that's greater or equal to the array
size.

This fixes VM faults and GPU hangs with Dead Rising 4.

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2148
Fixes: 71a6794200 ("ac/nir: Enable nir_opt_large_constants")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
(cherry picked from commit a0f1a5fa05)
2019-12-12 09:22:54 -08:00
Pierre-Eric Pelloux-Prayer
1452cf672c radeonsi: use gfx9.surf_offset to compute texture offset
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2177
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit ff0f108666)
2019-12-12 09:22:54 -08:00
Mauro Rossi
88b2a8ba3f android: radeonsi: fix build after vl refactoring (v2)
vl functions moved from radeonsi to gallium/auxiliary/vl have left
android build of radeonsi in broken state.

libmesa_galliumvl static is need to build readeonsi,
gallium_dri building rules are reworked to avoid multiple symbols
and libmesa_galliumvl static dependency is needed in radeonsi.

Here is the changelog:
- android: gallium/auxiliary: add libmesa_galliumvl static
- android: gallium_dri: move libmesa_gallium to static to prevent multiple symbols
- android: radeonsi: fix build after vl refactoring

Fixes the following building error:

external/mesa/src/gallium/drivers/radeonsi/si_uvd.c:47:
error: undefined reference to 'vl_video_buffer_create_as_resource'
clang.real: error: linker command failed with exit code 1 (use -v to see invocation)

Fixes: 86e60bc ("radeonsi: remove si_vid_join_surfaces and use combined planar allocations")
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 96aef08dc6)
Conflicts Resolved by Dylan Baker

Conflicts:
	src/gallium/targets/dri/Android.mk

Panfrost is not enabled for android in 19.3, and the series is a bit
bigger than I'd like to pull into the stable branch for a .0 release
2019-12-11 16:41:11 -08:00
Jason Ekstrand
3f50741bc2 anv: Don't leak when set_tiling fails
Fixes: a44744e01d "anv: Require a dedicated allocation for..."
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
(cherry picked from commit 0a36fafa95)
Conflicts resolved by Dylan Baker

Conflicts:
	src/intel/vulkan/anv_device.c
2019-12-11 16:34:38 -08:00
Nanley Chery
58395e5293 iris: Fix import of multi-planar surfaces with modifiers
Multi-planar surfaces are allowed to have modifiers. Don't require
DRM_FORMAT_MOD_INVALID in order to create a surface for each plane
defined by the format.

Fixes: 246eebba4a ("iris: Export and import surfaces with modifiers that have aux data")
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 21376cffb3)
2019-12-11 15:49:41 -08:00
James Xiong
ae06960627 iris: try to set the specified tiling when importing a dmabuf
When importing a dmabuf with a specified tiling, the dmabuf user
should always try to set the tiling mode because: 1) the exporter
can set tiling AFTER exporting/importing. 2) a dmabuf could be
exported from a kernel driver other than i915, in this case the
dmabuf user and exporter need to set tiling separately.

This patch fixes a problem when running vkmark under weston with
iris on ICL, it crashed to console with the following assert. i965
doesn't have this problem as it always tries to set the specified
tiling mode.

weston: ../src/gallium/drivers/iris/iris_resource.c:990: iris_resource_from_handle: Assertion `res->bo->tiling_mode == isl_tiling_to_i915_tiling(res->surf.tiling)' failed.

Signed-off-by: James Xiong <james.xiong@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
(cherry picked from commit b6d45e7f74)
2019-12-11 15:49:35 -08:00
Nanley Chery
7b2ef16086 gallium: Store the image format in winsys_handle
This format will be used to properly handle planar images with modifiers
in iris.

Fixes: 246eebba4a ("iris: Export and import surfaces with modifiers that have aux data")
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 51ee8fff9b)
2019-12-11 15:46:50 -08:00
Bas Nieuwenhuizen
d4dad580e5 radv: Fix RGBX Android<->Vulkan format correspondence.
This is correct per the Vulkan spec format equivalence table.

Fixes: f36b52740a "radv/android: Add android hardware buffer queries."
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 2e44bfc14f)
2019-12-11 15:46:20 -08:00
Dylan Baker
4a3b4ccf6b meson/broadcom: libbroadcom_cle also needs zlib
Fixes: 1ae8018a6a
       ("meson: Add support for the vc4 driver.")
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit d0eebda990)
2019-12-11 15:46:15 -08:00
Dylan Baker
a637f36b61 meson/broadcom: libbroadcom_cle needs expat headers
Fixes: 1ae8018a6a
       ("meson: Add support for the vc4 driver.")
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 85a9698ac3)
2019-12-11 15:46:10 -08:00
Lionel Landwerlin
843629708e anv: fix missing gen12 handling
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 181be14d43 ("anv: Build for gen12")
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit dcfe1903c3)
2019-12-10 09:14:38 -08:00
Pierre-Eric Pelloux-Prayer
01d53f7ac0 radeonsi: fix multi plane buffers creation
When using 3 planes, the sequence produces this chain:
  plane0 -> plane2
This commit fixes this to produce:
  plane0 -> plane1 -> plane2

Fixes: 86e60bc265 ("radeonsi: remove si_vid_join_surfaces and use combined planar allocations")
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2193
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit e3e91cebcd)
2019-12-10 09:14:34 -08:00
Alyssa Rosenzweig
166a3ae3c8 gallium/util: Support POLYGON in u_stream_outputs_for_vertices
u_decomposed_prims_for_vertices cannot support POLYGON, but POLYGON is
trivial to support as a special case directly (since we have the number
of vertices directly).

Fixes aborts in Panfrost in apps using GL_POLYGON.

Fixes: e881aa8c12 ("gallium/util: Add u_stream_outputs_for_vertices helper")
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Revewied-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit a37822f5f7)
2019-12-10 09:14:28 -08:00
Jason Ekstrand
c5e203ff50 anv: Re-emit all compute state on pipeline switch
It's a very odd case to hit in the real world.  However, there are some
CTS tests which switch back and forth between dispatch and clear without
changing the pipeline.

Fixes: bc612536eb "anv: Emit a dummy MEDIA_VFE_STATE before switching..."
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
(cherry picked from commit 0f60aa4037)
2019-12-10 09:14:21 -08:00
Fritz Koenig
22d1e495da freedreno: reorder format check
With the addition of the planar formats helper, the
planar formats no longer have a valid block.bits field.
Calling util_format_get_blocksize therefore asserts.

Reorder the check to see if the format is supported
before doing the query to get the blocksize.

Fixes: 20f132e5ef ("gallium/util: add planar format layouts and helpers")

Signed-off-by: Fritz Koenig <frkoenig@google.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
(cherry picked from commit c496d44284)
2019-12-10 09:14:14 -08:00
Nanley Chery
a67289631f gallium/dri2: Fix creation of multi-planar modifier images
The commit noted below assumed and enforced that DRM_MOD_INVALID was the
only valid modifier for multi-planar imported images. Due to that, it
required that modifier on multi-planar images to:

   1. Allow multiple planes.
   2. Perform YUV format lowering and extent adjustments.
   3. Use buffer_index to correctly map the given planes.

Fix these issues by removing or updating the code built on that
assumption.

Fixes: 2066966c10 ("gallium/dri2: Support creating multi-planar modifier images")
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit d5c857837a)
2019-12-10 09:13:56 -08:00
Timothy Arceri
6adf4fe26d glsl/nir: iterate the system values list when adding varyings
Iterate the system values list when adding varyings to the program
resource list in the NIR linker. This is needed to avoid CTS
regressions when using the NIR to build the GLSL resource list in
an upcoming series. Presumably it also fixes a bug with the current
ARB_gl_spirv support.

Fixes: ffdb44d3a0 ("nir/linker: Add inputs/outputs to the program resource list")

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
(cherry picked from commit 1abca2b3c8)
2019-12-10 09:13:46 -08:00
Ian Romanick
fe136a943d intel/compiler: Fix 'comparison is always true' warning
Without looking at the assembly or something, I'm not sure what the
compiler does here.  The brw_reg_type enum is marked packed, so I'm
guess that it gets represented as a uint8_t.  That's the only reason I
could think that comparing with -1 would be always true.

This patch adds the same cast that exists in brw_hw_type_to_reg_type.
It might be better to add a #define outside the enum for
BRW_REGISTER_TYPE_INVALID as (enum brw_reg_type)-1.

src/intel/compiler/brw_eu_compact.c: In function ‘has_immediate’:
src/intel/compiler/brw_eu_compact.c:1515:20: warning: comparison is always true due to limited range of data type [-Wtype-limits]
 1515 |       return *type != -1;
      |                    ^~
src/intel/compiler/brw_eu_compact.c:1518:20: warning: comparison is always true due to limited range of data type [-Wtype-limits]
 1518 |       return *type != -1;
      |                    ^~

Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
CID: 1455194
Fixes: 12d3b11908 ("intel/compiler: Add instruction compaction support on Gen12")
Cc: @mattst88
(cherry picked from commit 668635abd2)
2019-12-10 09:13:05 -08:00
Rob Clark
b2d5d0aae1 nir/lower_clip: Fix incorrect driver loc for clipdist outputs
Somehow adjusting maxloc based on existing outputs got lost, resulting
in the clipdist varying clobbering the position varying.  Causing a
shader that had no position output in freedreno/ir3, which triggers GPU
hangs in neverball.

Fixes: d0f746b645 ("nir: Save nir_variable pointers in nir_lower_clip_vs rather than locs.")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
(cherry picked from commit 372ed42d22)
2019-12-10 09:13:00 -08:00
Dylan Baker
e8635ce28e cherry-ignore: update for 19.3-rc7 2019-12-04 13:41:07 -08:00
Lionel Landwerlin
fb6db6b5bb intel/perf: fix improper pointer access
This expression was unused by the macro, probably why it didn't
register in the compilation.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit ddacd3d43b)
2019-12-04 13:41:07 -08:00
Lionel Landwerlin
c90f4e9508 intel/perf: simplify the processing of OA reports
This is a more accurate description of what happens in processing the
OA reports.

Previously we only had a somewhat difficult to parse state machine
tracking the context ID.

What we really only need to do to decide if the delta between 2
reports (r0 & r1) should be accumulated in the query result is :

   * whether the r0 is tagged with the context ID relevant to us

   * if r0 is not tagged with our context ID and r1 is: does r0 have a
     invalid context id? If not then we're in a case where i915 has
     resubmitted the same context for execution through the execlist
     submission port

v2: Update comment (Ken)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 8c0b058263)
2019-12-04 13:41:07 -08:00
Lionel Landwerlin
1de3548668 intel/perf: take into account that reports read can be fairly old
If we read the OA reports late enough after the query happens, we can
get a timestamp in the report that is significantly in the past
compared to the start timestamp of the query. The current code must
deal with the wraparound of the timestamp value (every ~6 minute). So
consider that if the difference is greater than half that wraparound
period, we're probably dealing with an old report and make the caller
aware it should read more reports when they're available.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit b364e920bf)
2019-12-04 13:41:07 -08:00
Lionel Landwerlin
4399795fbd intel/perf: set read buffer len to 0 to identify empty buffer
We always add an empty buffer in the list when creating the query.
Let's set the len appropriately so that we can recognize it when we
read OA reports up to the end of a query.

We were using an 0 timestamp value associated with the empty buffer
and incorrectly assuming this was a valid value. In turn that led to
not reading enough reports and resulted in deltas added to our counter
values which should have been discarded because those would be flagged
for a different context.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 9d0a5c817c)
2019-12-04 13:41:07 -08:00
Lionel Landwerlin
d362ba77ce intel/perf: fix invalid hw_id in query results
Accumulation happens between 2 reports, it can be between a start/end
report from another context. So only consider updating the hw_id of
the results when it's not already valid and that we have a valid value
to put in there.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 41b54b5faf ("i965: move OA accumulation code to intel/perf")
Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit acea59dbf8)
2019-12-04 13:41:07 -08:00
Dylan Baker
9b189cb9b1 VERSION: bump version for 19.3-rc6 2019-12-04 13:14:01 -08:00
Daniel Schürmann
15791ca8f9 aco: fix a couple of value numbering issues
Fixes: 3a20ef4a32 'aco: refactor value numbering'

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
2019-12-04 08:18:46 +00:00
Jason Ekstrand
f0aa6a7535 anv: Set up SBE_SWIZ properly for gl_Viewport
gl_Viewport is also in the VUE header so we need to whack the read
offset to 0 and emit a default (no overrides) SBE_SWIZ entry in that
case as well.

Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
(cherry picked from commit b1f37688ba)
2019-12-03 10:46:25 -08:00
Jordan Justen
f6ac7d9a5b iris: Allow max dynamic pool size of 2GB for gen12
Reworks:
 * Adjust comment to list the state packets that curro found to be
   affected.

Fixes: 8125d7960b ("intel/dev: Add preliminary device info for Tigerlake")
Cc: 19.3 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
(cherry picked from commit e277009d8d)
2019-12-03 10:46:25 -08:00
Rhys Perry
f9e8f6bad8 nir/lower_io_to_vector: don't create arrays when not needed
Some backends require that there are no array varyings.

If there were no arrays in the input shader, the pass shouldn't have to
create new ones.

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2103
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2167
Fixes: bcd14756ee ('nir/lower_io_to_vector: add flat mode')
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
(cherry picked from commit 5404b7aaa3)
2019-12-03 10:46:09 -08:00
Rhys Perry
f7d100caad radv: set writes_memory for global memory stores/atomics
Fixes: 13ab63bb62 ('radv: Implement VK_EXT_buffer_device_address.')
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
(cherry picked from commit 35fab1ba33)
2019-12-03 10:24:23 -08:00
Daniel Schürmann
0fa0b5fc3a aco: don't split live-ranges of linear VGPRs
Fixes: 93c8ebfa78 'aco: Initial commit of independent AMD compiler'

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
(cherry picked from commit 8861a82be7)
2019-12-03 10:24:08 -08:00
Rhys Perry
bf03a4311b aco: add v_nop inbetween exec write and VMEM/DS/FLAT
LLVM and the proprietary compiler seem to do this

Fixes: b01847bd9 ("aco/gfx10: Fix mitigation of VMEMtoScalarWriteHazard.")
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
(cherry picked from commit a9fc81b098)
2019-12-03 10:24:04 -08:00
Rhys Perry
967043eb68 aco: fix i2i64
Fixes: 93c8ebfa ('aco: Initial commit of independent AMD compiler')
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
(cherry picked from commit 11f43caaec)
2019-12-03 10:23:56 -08:00
Rhys Perry
f4a4cce590 aco: propagate p_wqm on an image_sample's coordinate p_create_vector
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2156
Fixes: 93c8ebfa78 ('aco: Initial commit of independent AMD compiler')
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
(cherry picked from commit ff70ccad16)
2019-12-03 10:23:51 -08:00
Christian Gmeiner
4f026b2a05 etnaviv: remove dead code
ptiled is always NULL so the if statement is useless.

CoverityID: 1415572
Fixes: b962776530 ("etnaviv: rework compatible render base")
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
(cherry picked from commit 1be220833c)
2019-12-03 10:23:46 -08:00
Jonathan Gray
d32a34a3f3 i965: update Makefile.sources for perf changes
brw_performance_query_metrics.h was removed in
134e750e16 and
brw_performance_query.h was removed in
8ae6667992

remove reference to these files from Makefile.sources

Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Fixes: 134e750e16 ("i965: extract performance query metrics")
Fixes: 8ae6667992 ("intel/perf: move query_object into perf")
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
(cherry picked from commit 34dda0ca65)
2019-12-03 10:23:40 -08:00
Boris Brezillon
8e3c4caf74 panfrost: Make sure we reset the damage region of RTs at flush time
We must reset the damage info of our render targets here even though a
damage reset normally happens when the DRI layer swaps buffers. That's
because there can be implicit flushes the GL app is not aware of, and
those might impact the damage region: if part of the damaged portion
is drawn during those implicit flushes, you have to reload those areas
before next draws are pushed, and since the driver can't easily know
what's been modified by the draws it flushed, the easiest solution is
to reload everything.

Reported-by: Carsten Haitzler <raster@rasterman.com>
Fixes: 65ae86b854 ("panfrost: Add support for KHR_partial_update()")
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
(cherry picked from commit c6e2096c47)
2019-12-03 10:23:35 -08:00
Boris Brezillon
e11d9cd9ed gallium: Fix the ->set_damage_region() implementation
BACK_LEFT attachment can be outdated when the user calls
KHR_partial_update() (->lastStamp != ->texture_stamp), leading to a
damage region update on the wrong pipe_resource object.
Let's delay the ->set_damage_region() call until the attachments are
updated when we're in that case.

Reported-by: Carsten Haitzler <raster@rasterman.com>
Fixes: 492ffbed63 ("st/dri2: Implement DRI2bufferDamageExtension")
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit b196e1a8cf)
2019-12-03 10:23:29 -08:00
Bas Nieuwenhuizen
0ca8b506a4 radv: Fix timeline semaphore refcounting.
Was totally broken ...

Removed two if(point) {} because point is always non-NULL and we
were counting on that already for counting, since we NULL our
references to semaphores without active point earlier.

Fixes: 4aa75bb3bd "radv: Add wait-before-submit support for timelines."
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2137
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit 48fc65413c)
2019-12-03 10:23:24 -08:00
Jonathan Gray
a260645345 winsys/amdgpu: avoid double simple_mtx_unlock()
pthread_mutex_unlock() when unlocked is documented by posix as
being undefined behaviour.  On OpenBSD pthread_mutex_unlock() will call
abort(3) if this happens.

This occurs in amdgpu_winsys_create() after
cb446dc0fa
winsys/amdgpu: Add amdgpu_screen_winsys

Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Cc: 19.2 19.3 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 3fe3bde4f2)
2019-12-03 10:23:20 -08:00
Bas Nieuwenhuizen
5ba4fb857d radv: Unify max_descriptor_set_size.
They were out of sync. Besides syncing, lets ensure they never diverge
again.

Fixes: 8d2654a419 "radv: Support VK_EXT_inline_uniform_block."
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit 4cde0e04e3)
2019-12-03 10:23:16 -08:00
Kenneth Graunke
553de940de drirc: Set vs_position_always_invariant for Shadow of Mordor on Intel
When drawing the main character in Shadow of Mordor, the game appears
to draw Talion with one vertex shader, and the Wraith with another.
If the compiler optimizes those in different ways which lead to slight
imprecisions, then the resulting positions may not line up, leading to
Z-fighting occurring as the game decides which of the two are in front.

brw_nir_opt_peephole_ffma looks at usages of multiply adds across the
entire shader, and may make different decisions between the two, leading
to such imprecisions and Z-fighting.  This started happening recently
after a NIR change to eliminate unnecessary MOVs (7025dbe7), but that
change simply exposed the existing problem.

Improves performance on Skylake GT4e by 1.22945% +/- 0.398672% (n=3),
likely due to the fixed rendering.

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/1985
Fixes: 7025dbe794 ("nir: Skip emitting no-op movs from the builder.")
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 51cc380894)
2019-12-03 10:23:12 -08:00
Kenneth Graunke
f63c3ecaa0 driconf, glsl: Add a vs_position_always_invariant option
Many applications use multi-pass rendering and require their vertex
shader position to be computed the same way each time.  Optimizations
may consider, say, fusing a multiply-add based on global usage of an
expression in a shader.  But a second shader with the same expression
may have different code, causing that optimization to make the other
choice the second time around.

The correct solution is for applications to mark their VS outputs
'invariant', indicating they need multiple shaders to compute that
output in the same manner.  However, most applications fail to do so.

So, we add a new driconf option - vs_position_always_invariant - which
forces the gl_Position output in vertex shaders to be marked invariant.

Fixes: 7025dbe794 ("nir: Skip emitting no-op movs from the builder.")
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 9b577f2a88)
2019-12-03 10:23:03 -08:00
Samuel Pitoiset
d438ccdedf radv/gfx10: fix implementation of exclusive scans
This implementation is loosely based on ROCm.
https://github.com/RadeonOpenCompute/ROCm-Device-Libs/blob/master/ockl/src/wfredscan.cl

This fixes dEQP-VK.subgroups.arithmetic.*.subgroupexclusive* on GFX10.

Fixes: 227c29a80d ("amd/common/gfx10: implement scan & reduce operations")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
(cherry picked from commit c9aa843961)
Conflicts resolved by Dylan Baker
2019-12-03 10:22:47 -08:00
Samuel Pitoiset
19573e4374 radv: fix enabling sample shading with SampleID/SamplePosition
When a fragment shader includes an input variable decorated with
SampleId or SamplePosition, sample shading should be enabled
because minSampleShadingFactor is expected to be 1.0.

Cc: 19.2, 19.3 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
(cherry picked from commit 86a5fbfd4a)
2019-11-27 09:47:14 -08:00
Dylan Baker
5a12bc6454 VERSION: Bump version for -rc5 2019-11-27 09:07:13 -08:00
Yevhenii Kolesnikov
14acf6fc3d meson: Fix linkage of libgallium_nine with libgalliumvl
Do not link libgallium_nine with libgalliumvl_stub if it's already
linked with libgalliumvl. Linking with stub leads to "duplicate
symbol" errors.

Fixes: 6b4c7047d5
       ("meson: build gallium nine state_tracker")
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2040

Signed-off-by: Yevhenii Kolesnikov <yevhenii.kolesnikov@globallogic.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
(cherry picked from commit 9af22ccddc)
2019-11-26 16:43:04 -08:00
Bas Nieuwenhuizen
06a95a06e8 radv: Allocate cmdbuffer space for buffer marker write.
Fixes: 946193ae00 "radv: add support for VK_AMD_buffer_marker"
Reviewed-by:  Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit 25bc9102d8)
2019-11-26 16:43:04 -08:00
Gert Wollny
2e8af7b3e0 r600: Disable eight bit three channel formats
Commit 0899bf55 made some deqp-gles3 tests related to RGB8 PBOs fail
on R600 because it exposed PIPE_FORMAT_R8G8B8_UNORM and R600 doesn't
propely handle this. Disabling this format also for buffers fixes the
issue.

In addition, disabling also the related RGB8 integer formats for buffers
fixes some deqp-gles3 tests:

  dEQP-GLES3.functional.texture.specification.teximage2d_pbo.rgb8ui_cube
  dEQP-GLES3.functional.texture.specification.texsubimage2d_pbo.rgb8i_2d
  dEQP-GLES3.functional.texture.specification.texsubimage2d_pbo.rgb8i_cube
  dEQP-GLES3.functional.texture.specification.texsubimage2d_pbo.rgb8ui_2d
  dEQP-GLES3.functional.texture.specification.texsubimage2d_pbo.rgb8ui_cube
  dEQP-GLES3.functional.texture.specification.teximage3d_pbo.rgb8i_2d_array
  dEQP-GLES3.functional.texture.specification.teximage3d_pbo.rgb8i_3d
  dEQP-GLES3.functional.texture.specification.teximage3d_pbo.rgb8ui_2d_array
  dEQP-GLES3.functional.texture.specification.teximage3d_pbo.rgb8ui_3d
  dEQP-GLES3.functional.texture.specification.texsubimage3d_pbo.rgb8i_2d_array
  dEQP-GLES3.functional.texture.specification.texsubimage3d_pbo.rgb8i_3d
  dEQP-GLES3.functional.texture.specification.texsubimage3d_pbo.rgb8ui_2d_array
  dEQP-GLES3.functional.texture.specification.texsubimage3d_pbo.rgb8ui_3d

Fixes: 0899bf55
  st/mesa: Map MESA_FORMAT_RGB_UNORM8 <-> PIPE_FORMAT_R8G8B8_UNORM

Closes #2118

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit e41958e344)
2019-11-26 16:43:04 -08:00
Timothy Arceri
5b9decf632 radv: create a fresh fork for each pipeline compile
In order to prevent a potential malicious pipeline tainting our
secure compile process and interfering with successive pipelines
we want to create a fresh fork for each pipeline compile.

Benchmarking has shown that simply forking on each pipeline
creation doubles the total time it takes to compile a fossilize db
collection. So instead here we fork the process at device creation
so that we have a slim copy of the device and then fork this
otherwise idle and untainted process each time we compile a
pipeline. Forking this slim copy of the device results in only a
20% increase in compile time vs a 100% increase.

Fixes: cff53da3 ("radv: enable secure compile support")
(cherry picked from commit f54c4e85ce)
2019-11-26 16:43:04 -08:00
Timothy Arceri
0b0c500ad1 radv: add a secure_compile_open_fifo_fds() helper
This will be used to create a communication pipe between the user
facing device and a freshly forked (per pipeline compile) slim copy
of that device.

We can't use pipe() here because the fork will not be a direct fork
of the user facing process. Instead we use a previously forked
copy of the process that was forked at device creation in order to
reduce the resources required for the fork and avoid performance
issues.

Fixes: cff53da374 ("radv: enable secure compile support")
(cherry picked from commit 1663bb1f77)
2019-11-26 16:43:04 -08:00
Timothy Arceri
093deac71f radv: add some infrastructure for fresh forks for each secure compile
In the following commits we want to be able to fork an existing lightweight
fork created at device creation time. In order for the user facing process
to communicate with this new fresh fork we create some members here to hold
FIFO file descriptors and a unique id.

Here we also add a new fork enum that we use to tell the lightweight
process to create a fresh fork.

For more information on why we create a fresh fork see the following
commits.

(cherry picked from commit ef54f15da9)
2019-11-26 16:43:04 -08:00
Zebediah Figura
ba9f8e0fee Revert "draw: revert using correct order for prim decomposition."
This reverts commit f97b731c82.

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/250

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
(cherry picked from commit a3c8bc10aa)
2019-11-26 16:43:04 -08:00
Ian Romanick
85b0bb5144 intel/fs: Disable conditional discard optimization on Gen4 and Gen5
The CMP instruction on Gen4 and Gen5 generates one bit (the LSB) of
valid data and 31 bits of junk.  Results of comparisons that are used as
Boolean values need to have a fixup applied to generate the proper 0/~0
values.

Calling fs_visitor::nir_emit_alu with need_dest=false prevents the fixup
code from being generated.  This results in a sequence like:

        cmp.l.f0.0(16)  g8<1>F          g14<8,8,1>F     0x0F  /* 0F */
        ...
        cmp.l.f0.0(16)  g4<1>F          g6<8,8,1>F      0x0F  /* 0F */
(+f0.1) or.z.f0.1(16) null<1>UD g4<8,8,1>UD     g8<8,8,1>UD

instead of

        cmp.l.f0.0(16)  g8<1>F          g14<8,8,1>F     0x0F  /* 0F */
        ...
        cmp.l.f0.0(16)  g4<1>F          g6<8,8,1>F      0x0F  /* 0F */
        or(16) g4<1>UD g4<8,8,1>UD     g8<8,8,1>UD
(+f0.1) and.z.f0.1(16) null<1>UD g4<8,8,1>UD     1UD

I examined a couple of the shaders hurt by this change, and ALL of them
would have been affected by this bug. :(

Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/1836
Fixes: 0ba9497e66 ("intel/fs: Improve discard_if code generation")

Iron Lake
total instructions in shared programs: 8122757 -> 8122957 (<.01%)
instructions in affected programs: 8307 -> 8507 (2.41%)
helped: 0
HURT: 100
HURT stats (abs)   min: 2 max: 2 x̄: 2.00 x̃: 2
HURT stats (rel)   min: 0.84% max: 6.67% x̄: 2.81% x̃: 2.76%
95% mean confidence interval for instructions value: 2.00 2.00
95% mean confidence interval for instructions %-change: 2.58% 3.03%
Instructions are HURT.

total cycles in shared programs: 188510100 -> 188510376 (<.01%)
cycles in affected programs: 76018 -> 76294 (0.36%)
helped: 0
HURT: 55
HURT stats (abs)   min: 2 max: 12 x̄: 5.02 x̃: 4
HURT stats (rel)   min: 0.07% max: 3.75% x̄: 0.86% x̃: 0.56%
95% mean confidence interval for cycles value: 4.33 5.71
95% mean confidence interval for cycles %-change: 0.60% 1.12%
Cycles are HURT.

GM45
total instructions in shared programs: 4994403 -> 4994503 (<.01%)
instructions in affected programs: 4212 -> 4312 (2.37%)
helped: 0
HURT: 50
HURT stats (abs)   min: 2 max: 2 x̄: 2.00 x̃: 2
HURT stats (rel)   min: 0.84% max: 6.25% x̄: 2.76% x̃: 2.72%
95% mean confidence interval for instructions value: 2.00 2.00
95% mean confidence interval for instructions %-change: 2.45% 3.07%
Instructions are HURT.

total cycles in shared programs: 128928750 -> 128928982 (<.01%)
cycles in affected programs: 67442 -> 67674 (0.34%)
helped: 0
HURT: 47
HURT stats (abs)   min: 2 max: 12 x̄: 4.94 x̃: 4
HURT stats (rel)   min: 0.09% max: 3.75% x̄: 0.75% x̃: 0.53%
95% mean confidence interval for cycles value: 4.19 5.68
95% mean confidence interval for cycles %-change: 0.50% 1.00%
Cycles are HURT.

(cherry picked from commit e51eda99df)
2019-11-26 16:43:04 -08:00
Yevhenii Kolesnikov
9cd69861f8 glsl: Enable textureSize for samplerExternalOES
From OES_EGL_image_external_essl3

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/1901

Signed-off-by: Yevhenii Kolesnikov <yevhenii.kolesnikov@globallogic.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
2019-11-26 16:43:04 -08:00
Dave Airlie
c694d3c5ca llvmpipe/ppc: fix if/ifdef confusion in backport.
Fixes: 32aba91c07 (llvmpipe: use ppc64le/ppc64 Large code model for JIT-compiled shaders)
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
2019-11-26 16:43:04 -08:00
Hyunjun Ko
6477084c1a freedreno/ir3: fix printing output registers of FS.
Fixes: cea39af2fb ("freedreno/ir3: Generalize ir3_shader_disasm()")

Reviewed-by: Rob Clark <robdclark@gmail.com>
(cherry picked from commit d0f38394b1)
2019-11-26 16:43:04 -08:00
Alejandro Piñeiro
37ded70630 v3d: adds an extra MOV for any sig.ld*
Specifically when we are in non-uniform control flow, as we would need
to set the condition for the last instruction. If (for example) a
image atomic load stores directly their value on a NIR register,
last_inst would be a nop, and would fail when set the condition.

Fixes piglit test:
spec/glsl-es-3.10/execution/cs-ssbo-atomic-if-else-2.shader_test

Fixes: 6281f26f06 ("v3d: Add support for shader_image_load_store.")

v2: (Changes suggested by Eric Anholt)
   * Cover all sig.ld* signals, not just ldunif and ldtmu, as all of
     them have the same restriction.
   * Update comment explaining why we add a MOV in that case
   * Tweak commit message.

v3:
   * Drop extra set of parens (Eric)
   * Add missing ld signal to is_ld_signal to fix shader-db regression.

Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit b4bc59e37e)
2019-11-26 16:43:04 -08:00
Jose Maria Casanova Crespo
9d1b1968bf v3d: Fix predication with atomic image operations
Fixes dEQP test:
dEQP-GLES31.functional.synchronization.inter_call.with_memory_barrier.image_atomic_multiple_interleaved_write_read

Fixes piglit test:
spec/glsl-es-3.10/execution/cs-image-atomic-if-else.shader_test

Fixes: 6281f26f06 ("v3d: Add support for shader_image_load_store.")

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit d983055184)
2019-11-26 16:43:04 -08:00
Bas Nieuwenhuizen
79521963ab radv: Do not change scratch settings while shaders are active.
When the scratch ringbuffer settings are changed, the shader unit has
to be idle or we will have shaders using old and new settings.

That combination is not supported on the HW (likely the offset is
ringbuffer idx * WAVESIZE * 1024).

CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit 4eb2a1dc6f)
2019-11-26 16:43:04 -08:00
Eric Engestrom
abccd999ef vulkan: delete typo'd header
Two files exist in that directory:
- vulkan_xlib_randr.h
- vulkan_xlib_xrandr.h

Both were imported in 205c271562 ("vulkan: Update the XML and
headers to 1.1.70") with identical contents (ie. the
VK_EXT_acquire_xlib_display extension), but the former was never
included anywhere and can't be found upstream [1], while the latter is
included in vulkan.h and found upstream.

[1] https://github.com/KhronosGroup/Vulkan-Headers/tree/master/include/vulkan

Fixes: 205c271562 ("vulkan: Update the XML and headers to 1.1.70")
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 344859c32d)
2019-11-26 16:43:04 -08:00
Dylan Baker
cd736de7aa VERSION: bump for 19.3.0-rc4 2019-11-20 09:25:03 -08:00
Jason Ekstrand
b7ab6e9470 anv: Stop bounds-checking pushed UBOs
The bounds checking is actually less safe than just pushing the data.
If the bounds checking actually ever kicks in and it's not on the last
UBO push range, then the shrinking will cause all subsequent ranges to
be pushed to the wrong place in the GRF.  One of the behaviors we
definitely don't want is for OOB UBO access to result in completely
unrelated UBOs returning garbage values.  It's safer to just push the
UBOs as-requested.  If we're really concerned about robustness, we can
emit shader code to do bounds checking which should be stupid cheap (a
CMP followed by SEL).

Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
2019-11-19 16:54:04 -08:00
Brian Paul
addf63dbd7 Call shmget() with permission 0600 instead of 0777
A security advisory (TALOS-2019-0857/CVE-2019-5068) found that
creating shared memory regions with permission mode 0777 could allow
any user to access that memory.  Several Mesa drivers use shared-
memory XImages to implement back buffers for improved performance.

This path changes the shmget() calls to use 0600 (user r/w).

Tested with legacy Xlib driver and llvmpipe.

Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
(cherry picked from commit 02c3dad0f3)
2019-11-19 16:54:04 -08:00
Rob Clark
2b4459973b Revert "freedreno/ir3: enable pre-fs texture fetch for a6xx"
This reverts commit f30c256ec0.

See 088a2a4cab031f1505d531698109f330f94f3072

Fixes: f30c256ec0 ("freedreno/ir3: enable pre-fs texture fetch for a6xx")
Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-11-19 16:54:04 -08:00
Danylo Piliaiev
48f8f0edca i965: Unify CC_STATE and BLEND_STATE atoms on Haswell as a workaround
Re-emitting 3DSTATE_CC_STATE_POINTERS after emitting
3DSTATE_BLEND_STATE_POINTERS fixes the shadow flickering in
SuperTuxCart and Tropico 6 which was seen only on Haswell.
The reason for this is unknown and fix was found empirically.

The closest mention in PRM is that it should improve performance.
From the HSW PRM, volume 2b, page 823 (3DSTATE_BLEND_STATE_POINTERS):
 "When the BLEND_STATE pointer changes but not the CC_STATE pointer,
  driver needs to force a CC_STATE pointer change to improve
  blend performance in pixel backend."

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/1834
Fixes: eca4a654 ("i965: Disable dual source blending when shader doesn't support it on gen8+")
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 6f17fe0606)
2019-11-19 16:54:04 -08:00
Jonathan Marek
3b8461cf16 freedreno/registers: fix a6xx_2d_blit_cntl ROTATE
A change from b7093882 got overwritten by 610c8c93

Fixes: 610c8c93 ("freedreno/registers: Update with GS, HS and DS registers")

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Clark <robdclark@gmail.com>
(cherry picked from commit 75e58d1fae)
2019-11-19 16:54:04 -08:00
Jonathan Marek
79610494f9 freedreno/ir3: disable texture prefetch for 1d array textures
Prefetch only supports the basic 2D texture case, checking is_array is
needed because 1d array textures pass the coord num_components==2 test.

Fixes: 2a0d45ae ("freedreno/ir3: Add a NIR pass to select tex instructions eligible for pre-fetch")

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Clark <robdclark@gmail.com>
(cherry picked from commit 0f5743429c)
2019-11-19 16:54:04 -08:00
Ben Crocker
32aba91c07 llvmpipe: use ppc64le/ppc64 Large code model for JIT-compiled shaders
Large programs, e.g. gnome-shell and firefox, may tax the
addressability of the Medium code model once a (potentially unbounded)
number of dynamically generated JIT-compiled shader programs are
linked in and relocated.  Yet the default code model as of LLVM 8 is
Medium or even Small.

The cost of changing from Medium to Large is negligible:
- an additional 8-byte pointer stored immediately before the shader entrypoint;
- change an add-immediate (addis) instruction to a load (ld).

Testing with WebGL Conformance
(https://www.khronos.org/registry/webgl/sdk/tests/webgl-conformance-tests.html)
yields clean runs with this change (and crashes without it).

Testing with glxgears shows no detectable performance difference.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1753327, 1753789, 1543572, 1747110, and 1582226

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/223

Co-authored by: Nemanja Ivanovic <nemanjai@ca.ibm.com>, Tom Stellard <tstellar@redhat.com>

CC: mesa-stable@lists.freedesktop.org

Signed-off-by: Ben Crocker <bcrocker@redhat.com>
(cherry picked from commit 9c3be6d21f)
Conflicts resolved Dylan (PIPE_ARCH -> UTIL_ARCH rename)
2019-11-19 16:54:04 -08:00
Rhys Perry
35182247fc aco: fix 64-bit fsign with 0
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Fixes: 93c8ebfa ('aco: Initial commit of independent AMD compiler')
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
(cherry picked from commit be1d11249b)
2019-11-19 16:54:04 -08:00
Rhys Perry
ab4df0ec72 aco: don't combine literals into v_cndmask_b32/v_subb/v_addc
No pipeline-db changes

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Fixes: 93c8ebfa ('aco: Initial commit of independent AMD compiler')
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
(cherry picked from commit b062b92ab1)
2019-11-19 16:54:04 -08:00
Dylan Baker
37d13ecca7 cherry-ignore: update for 19.3.0-rc4 cycle 2019-11-19 16:54:04 -08:00
Tapani Pälli
a3d52fd4ab Revert "dri_interface: add interface for EGL_EXT_image_flush_external"
This reverts commit 7520478461.

This series caused unexpected flickering artifacts with Iris driver on
Chrome OS and EGL_EXT_image_flush_external spec has not been published
yet.

Acked-by: Eric Engestrom <eric@engestrom.ch>
Acked-by: Kristian H. Kristensen <hoegsberg@google.com>
(cherry picked from commit 1a093a06d6)
2019-11-14 08:43:36 -08:00
Tapani Pälli
36fbe5b292 Revert "st/dri: assume external consumers of back buffers can write to the buffers"
This reverts commit 1d1b457821.

This series caused unexpected flickering artifacts with Iris driver on
Chrome OS and EGL_EXT_image_flush_external spec has not been published
yet.

Acked-by: Eric Engestrom <eric@engestrom.ch>
Acked-by: Kristian H. Kristensen <hoegsberg@google.com>
(cherry picked from commit 7951eb146c)
2019-11-14 08:43:32 -08:00
Tapani Pälli
9445d96d5c Revert "st/dri: add support for EGL_EXT_image_flush_external"
This reverts commit 1d122c104a.

This series caused unexpected flickering artifacts with Iris driver on
Chrome OS and EGL_EXT_image_flush_external spec has not been published
yet.

Acked-by: Eric Engestrom <eric@engestrom.ch>
Acked-by: Kristian H. Kristensen <hoegsberg@google.com>
(cherry picked from commit 25f596e6ba)
2019-11-14 08:43:29 -08:00
Tapani Pälli
5cd8c67a7f Revert "egl: handle EGL_IMAGE_EXTERNAL_FLUSH_EXT"
This reverts commit 34b1aa957a.

This series caused unexpected flickering artifacts with Iris driver on
Chrome OS and EGL_EXT_image_flush_external spec has not been published
yet.

Acked-by: Eric Engestrom <eric@engestrom.ch>
Acked-by: Kristian H. Kristensen <hoegsberg@google.com>
(cherry picked from commit ff05f16c99)
2019-11-14 08:43:25 -08:00
Tapani Pälli
d7c0a1d3d4 Revert "egl: implement new functions from EGL_EXT_image_flush_external"
This reverts commit c1c574fdf1.

This series caused unexpected flickering artifacts with Iris driver on
Chrome OS and EGL_EXT_image_flush_external spec has not been published
yet.

Acked-by: Eric Engestrom <eric@engestrom.ch>
Acked-by: Kristian H. Kristensen <hoegsberg@google.com>
(cherry picked from commit e64b91e34a)
2019-11-14 08:43:21 -08:00
Paulo Zanoni
7c61e5192f intel/compiler: fix nir_op_{i,u}*32 on ICL
On ICL we have the src1 restriction which is applied through
fix_byte_src() and potentially changes the type of the operands from 8
to 32 bits. When this change happens, we fall into the "else if
(bit_size < 32)" case and miscompute src_type because it takes into
consideration bit_size (8) instead of the adjusted size of temp_op
(32). This results in the shader reading unused memory, giving us
mostly failures, but occasional passes due to whatever was already in
the registers we were reading.

This commit fixes a lot of dEQP subgroup i8vec2 tests on ICL, such as:
    dEQP-VK.subgroups.arithmetic.compute.subgroupadd_i8vec2

This can also be verified by simply changing fix_byte_src() to apply
on all platforms.

Fixes: 5847de6e9a ("intel/compiler: don't use byte operands for src1 on ICL")
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
(cherry picked from commit eb6352162d)
2019-11-14 08:43:17 -08:00
Caio Marcelo de Oliveira Filho
f393c92345 anv: Initialize depth_bounds_test_enable when not explicitly set
This was causing uninitialized value to end up propagated to the
3DSTATE_DEPTH_BOUNDS packet, leading to asserts on packet
building due to the value being greater than 1.

Fixes: 939ddccb7a ("anv: Add support for depth bounds testing.")
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>
(cherry picked from commit 0aaf47f7cd)
2019-11-14 08:43:14 -08:00
Ian Romanick
4fbe772b23 nir/algebraic: Mark other comparison exact when removing a == a
This prevents some additional optimizations that would change the
original result.  This includes things like (b < a && b < c) => b <
min(a, c) and !(a < b) => b >= a.  Both of these optimizations were
specifically observed in the piglit tests added in piglit!160.

This was discovered while investigating
https://gitlab.freedesktop.org/mesa/mesa/issues/1958.  However, the
problem in that issue was Chrome or Angle is replacing calls to isnan()
with some stuff that we (correctly) optimize to false.  If they had left
the calls to isnan() alone, everything would have just worked.

No shader-db changes on any Intel platform.

I also tried marking the comparison generated by the isnan() function
precise.  The precise marker "infects" every computation involved in
calculating the parameter to the isnan() function, and this severely
hurt all of the (few) shaders in shader-db that use isnan().

I also considered adding a new ir_unop_isnan opcode that would implement
the functionality.  During GLSL IR-to-NIR translation, the resulting
comparison operation would be marked exact (and the samething would need
to happen in SPIR-V translation).

This approach taken by this patch seemed easier, but we may want to do
the ir_unop_isnan thing anyway.

Fixes: d55835b8bd ("nir/algebraic: Add optimizations for "a == a && a CMP b"")
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
(cherry picked from commit 9be4a422a0)
2019-11-14 08:43:09 -08:00
Ian Romanick
17ad67c6dc nir/algebraic: Add the ability to mark a replacement as exact
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
(cherry picked from commit ea19f2fb68)
2019-11-14 08:43:08 -08:00
Rob Clark
61366cdf05 freedreno/ir3: fix gpu hang with pre-fs-tex-fetch
For pre-fs-dispatch texture fetch, we need to assign bary_ij to r0.x,
even if it is not used in the shader (ie. only varying use is for tex
coords).  But if, for example, gl_FragCoord is used, it could get
assigned on top of bary_ij, resulting in a GPU hang.

The solution to this is two-fold: (1) the inputs/outputs rework has the
benefit of making RA realize bary_ij is a vec2, even if there are no
split/collect instructions (due to no varying fetches in the shader
itself).  And (2) extend the live ranges of meta:input instructions to
the first non-input, to prevent RA from assigning the same register to
multiple inputs.

Backport note: because of (1) above, a better solution for 19.3 would be
to revert f30c256ec0.

Fixes: f30c256ec0 ("freedreno/ir3: enable pre-fs texture fetch for a6xx")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit b22617fb57)
2019-11-13 12:09:16 -08:00
Rhys Perry
001e7305ab aco: don't propagate vgprs into v_readlane/v_writelane
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Fixes: 93c8ebfa ('aco: Initial commit of independent AMD compiler')
(cherry picked from commit 2c98d79d11)
2019-11-13 12:09:16 -08:00
Rhys Perry
1b8f93550a aco: fix read_invocation with VGPR lane index
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Fixes: 93c8ebfa ('aco: Initial commit of independent AMD compiler')
(cherry picked from commit 5a1bacb6f9)
2019-11-13 12:09:16 -08:00
Rhys Perry
992bff94f7 aco: fix shuffle with uniform operands
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Fixes: 93c8ebfa ('aco: Initial commit of independent AMD compiler')
(cherry picked from commit f97d933426)
2019-11-13 12:09:16 -08:00
Daniel Schürmann
51a15eabe6 aco: preserve kill flag on moved operands during RA
Fixes: 93c8ebfa78 aco: Initial commit of independent AMD compiler

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
(cherry picked from commit b6f5085dfe)
2019-11-13 12:09:16 -08:00
Daniel Schürmann
f3c0d5aa3a aco: fix invalid access on Pseudo_instructions
Fixes: 93c8ebfa78 aco: Initial commit of independent AMD compiler

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
(cherry picked from commit a2a6880743)
2019-11-13 12:09:16 -08:00
Marek Olšák
512ed9899a st/mesa: fix Sanctuary and Tropics by disabling ARB_gpu_shader5 for them
They use the "sample" keyword as a variable name.

Cc: 19.2 19.3 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
(cherry picked from commit e00791c552)
2019-11-13 12:09:16 -08:00
Lionel Landwerlin
35c196025b anv/wsi: signal the semaphore in the acquireNextImage
We seem to have forgotten about the semaphore in the
acquireNextImageInfo.

v2: Signal semaphore/fence regardless of presentation status (Jason)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit edc6606d4e)
2019-11-13 12:09:16 -08:00
Lionel Landwerlin
4910128bab anv: remove list items on batch fini
This doesn't seem to fix anything because those destroy() calls happen
right before the command buffer object & its list of batch_bo is also
destroyed. Still looks a bit cleaner.

v2: Found a second occurence

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> (v2)
Fixes: 26ba0ad54d ("vk: Re-name command buffer implementation files")
Cc: <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 935f8f0e56)
2019-11-13 12:09:16 -08:00
Lionel Landwerlin
14c8323774 anv: invalidate file descriptor of semaphore sync fd at vkQueueSubmit
We always close the in_fence at the end the anv_cmd_buffer_execbuf()
so when we take it from the semaphore, let's not forget to invalidate
it.

Note that the code leaks the fence_in if we get any error before
reaching the close(). Let's fix that in another patch or better,
rewrite the whole thing!

v2: drop redundant fd = -1 (Jason)

v3: Update commit message (Jason)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 048f0690ee)
2019-11-13 12:09:16 -08:00
Lionel Landwerlin
c78901c124 mesa: check framebuffer completeness only after state update
The change made in 88d665830f ("mesa: check draw buffer completeness
on glClearBufferfi/glClearBufferiv") correctly updated the state prior
to checking the framebuffer completeness on glClearBufferiv but not in
glClearBufferfi.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Fixes: 88d665830f ("mesa: check draw buffer completeness on glClearBufferfi/glClearBufferiv")
Gitlab: https://gitlab.freedesktop.org/mesa/mesa/issues/2072
(cherry picked from commit f93bb90302)
2019-11-13 12:09:16 -08:00
Laurent Carlier
2a497735ec egl: avoid local modifications for eglext.h Khronos standard header file
Move differences in eglextchromium.h header file, then provide the same header than libglvnd-1.2
So program that omit to include eglextchromium.h will fail to build with both mesa and libglvnd headers.

Fixes: a0a8109f "include: add the definition of EGL_EXT_image_flush_external"
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 57acf921e2)
2019-11-13 12:09:16 -08:00
Eric Engestrom
87efb9f3a4 egl: move #include of local headers out of Khronos headers
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit eaf4396602)
2019-11-13 12:09:16 -08:00
Dylan Baker
3d9c678772 Bump version for -rc3 2019-11-13 11:17:01 -08:00
Dylan Baker
bb08c0f04d cherry-ignore: Update for 19.3-rc3 cycle 2019-11-11 11:44:26 -08:00
Eric Engestrom
3c1b3656b9 egl: fix _EGL_NATIVE_PLATFORM fallback
When the X11 or Haiku platforms were compiled in, they would bypass the
`_EGL_NATIVE_PLATFORM` fallback by always returning themselves instead.

Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 86d3a346f1)
2019-11-11 11:44:26 -08:00
Erik Faye-Lund
05be725923 zink: correct depth-stencil format
When using packed vulkan-formats on little-endian systems, we need to
swap the components for the gallium formats. And since Zink isn't
big-endian safe yet, little-endian is the only endianess we care about
right now.

This fixes a bunch of piglit tests, amongs others:
- spec@arb_depth_texture@depth-level-clamp
- spec@arb_depth_texture@depthstencil-render-miplevels * d=z24
- spec@arb_depth_texture@fbo-depth-gl_depth_component24-blit
- spec@arb_depth_texture@fbo-depth-gl_depth_component24-copypixels
- spec@arb_depth_texture@fbo-depth-gl_depth_component24-drawpixels
- spec@arb_depth_texture@fbo-depth-gl_depth_component24-readpixels

Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Fixes: 8d46e35d16 ("zink: introduce opengl over vulkan")
(cherry picked from commit b4d47e21d7)
2019-11-11 11:44:26 -08:00
Caio Marcelo de Oliveira Filho
8608c460d1 spirv: Don't leak GS initialization to other stages
The stage specific fields of shader_info are in an union.  We've
likely been lucky that this value was either overwritten or ignored by
other stages.  The recent change in shader_info layout in commit
84a1a2578d ("compiler: pack shader_info from 160 bytes to 96 bytes")
made this issue visible.

Fixes: cf2257069c ("nir/spirv: Set a default number of invocations for geometry shaders")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 087ecd9ca5)
2019-11-11 11:44:26 -08:00
Timur Kristóf
2f66f619c8 ac: Handle invalid GFX10 format correctly in ac_get_tbuffer_format.
It happens that some games try to access a vertex buffer without
a valid format. This case was incorrectly handled by
ac_get_tbuffer_format which made ACO emit an invalid instruction.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Cc: 19.3 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit 911a826141)
2019-11-11 11:44:26 -08:00
Prodea Alexandru-Liviu
2bd7416823 Meson: Remove lib prefix from graw and osmesa when building with Mingw.
Also remove version sufix from osmesa swrast on Windows.

v2: Make sure we don't remove lib prefix on *nix platforms.

Signed-off-by: Prodea Alexandru-Liviu <liviuprodea@yahoo.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>

Cc: "19.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 1a05811936)
2019-11-11 11:44:26 -08:00
Daniel Schürmann
0aef18324a aco: workaround Tonga/Iceland hardware bug
The workaround got accidentally moved to the wrong place

Fixes: 08d510010b aco: increase accuracy of SGPR limits

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit a47e232ccd)
2019-11-11 11:44:26 -08:00
Lepton Wu
3211308e88 gallium: dri2: Use index as plane number.
This fix wrong color when playing video under Android + virgl
configuration.

Fixes: 2decad495f ("gallium/dri2: Support images with multiple planes for modifiers")
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Lepton Wu <lepton@chromium.org>
(cherry picked from commit 5a40e153fd)
2019-11-11 11:44:26 -08:00
Erik Faye-Lund
f7d76ad80e zink: disable fragment-shader texture-lod
We don't support nir_texop_txd, which is required by this cap. So let's
disable it for now.

Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Fixes: 8d46e35d16 ("zink: introduce opengl over vulkan")
(cherry picked from commit b385ad0c75)
2019-11-11 11:44:26 -08:00
Duncan Hopkins
52005416a0 zink: make sure src image is transfer-src-optimal
Fixes: d2bb63c8d4 ("zink: Use optimal layout instead of general. Reduces valid layer warnings. Fixes RADV image noise.")
(cherry picked from commit aa64b6dc7f)
2019-11-11 11:44:26 -08:00
Erik Faye-Lund
0b670a919c zink: do not advertize coherent mapping
We do not support them yet, so let's not pretend.

Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Fixes: 8d46e35d16 ("zink: introduce opengl over vulkan")
(cherry picked from commit a32a92f53a)
2019-11-11 11:44:26 -08:00
Erik Faye-Lund
b90f5a9ea0 zink: always allow mutating the format
There's no good way to know if a texture-view will be created, so we
just have to accept it for all resources.

Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Fixes: 8d46e35d16 ("zink: introduce opengl over vulkan")
(cherry picked from commit ca87a53b46)
2019-11-11 11:44:26 -08:00
Erik Faye-Lund
2ea5038045 zink: use actual format for render-pass
We should use the format derived from the image-view here, not from the
image itselt. Otherwise, we'll end up with incompatible render-passes.

Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Fixes: 8d46e35d16 ("zink: introduce opengl over vulkan")
(cherry picked from commit f3a72fd61c)
2019-11-11 11:44:26 -08:00
Kristian H. Kristensen
5ca2bb392f freedreno/a6xx: Disable geometry shaders for release
Signed-off-by: Kristian H. Kristensen <hoegsberg@google.com>
Acked-by: Rob Clark <robdclark@gmail.com>
2019-11-11 11:44:26 -08:00
Pierre-Eric Pelloux-Prayer
01f6321c09 radeonsi: fix shader disk cache key
Use unsigned values otherwise signed extension will produce a 64 bits value where
the 32 left-most bits are 1.

Fixes: 307e5cc8fd ("radeonsi: tell the shader disk cache what IR is used")
2019-11-11 11:44:26 -08:00
Dylan Baker
15342abc5b Bump VERSION to 19.3.0-rc2 2019-11-06 09:08:45 -08:00
Dylan Baker
08501e77af meson: Add dep_glvnd to egl deps when building with glvnd
Otherwise if glvnd is not installed systemwide, but only in a prefix,
it's headers wont be found. This happens because if it's headers are in
/usr/include/ then another dependence will provide the necessary -I
arguments and compilation will work.

Fixes: 035ec7a2bb
       ("meson: Add support for EGL glvnd")
Acked-by: Eric Engestrom <eric@engestrom.ch>
(cherry picked from commit 5d085ad052)
2019-11-05 09:17:38 -08:00
Paulo Zanoni
49af89a0b9 intel/compiler: remove the operand restriction for src1 on GLK
Commit 5847de6e9a implemented a restriction that applies to ICL, but
wrongly marked it as also applying to GLK. Reviewers or MR !1125
pointed this, and the commit history shows removal of GLK to parts of
the patch, but it turns there was still a left-over GLK check in the
code.

This code was breaking some of the i8vec2 tests on GLK, for example:
  dEQP-VK.subgroups.arithmetic.compute.subgroupadd_i8vec2

Removing the GLK check solves the issue for GLK. I don't see a reason
on why implementing this restriction would actually break GLK, so
there's still more to investigate here since this bug may be affecting
ICL+, but let's apply the real GLK fix while we analyze and discuss
the other possible issues.

Fixes: 5847de6e9a ("intel/compiler: don't use byte operands for src1
on ICL")
BSpec: 3017
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
(cherry picked from commit b57383a944)
2019-11-05 09:17:38 -08:00
Daniel Schürmann
dd4b73ad38 aco: fix accidential reordering of instructions when scheduling
Fixes: 8678699918 "aco: implement VGPR spilling"

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
(cherry picked from commit efe737fc4f)
2019-11-05 09:17:38 -08:00
Daniel Schürmann
a8faeff399 aco: only use single-dword loads/stores for spilling
Fixes: 8678699918 "aco: implement VGPR spilling"

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
(cherry picked from commit 5c7dcb15e0)
2019-11-05 09:17:38 -08:00
Daniel Schürmann
0d846243a0 aco: fix immediate offset for spills if scratch is used
Fixes: 8678699918 "aco: implement VGPR spilling"

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
(cherry picked from commit d97c0bdd55)
2019-11-05 09:17:38 -08:00
Lionel Landwerlin
bc5357bf33 anv: Properly handle host query reset of performance queries
The host query reset entry point didn't use the availability offset
for performance queries.

To fix this, reorder the availability of performance queries to match
other queries.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 2b5f30b1d9 ("anv: implement VK_INTEL_performance_query")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit ee6fbb95a7)
2019-11-05 09:17:38 -08:00
Kenneth Graunke
5cee7ad873 iris: Fix "Force Zero RTA Index Enable" setting again
In 2ca0d913ea, we began updating cso_fb->layers to the actual layer
count, rather than 0.  This fixed cases where we were setting "Force
Zero RTA Index Enable" even when doing layered rendering.  Sadly, it
also broke the check entirely: cso_fb->layers is now 1 for non-layered
cases, but the Force Zero RTA Index check was still comparing for 0.

Fixes: 2ca0d913ea ("iris: Fix framebuffer layer count")
(cherry picked from commit fc7b748086)
2019-11-05 09:17:38 -08:00
Dylan Baker
184d39301d nir: correct use of identity check in python
Python has the identity operator `is`, and the equality operator `==`.
Using `is` with strings sometimes works in CPython due to optimizations
(they have some kind of cache), but it may not always work.

Fixes: 96c4b135e3
       ("nir/algebraic: Don't put quotes around floating point literals")
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 717606f9f3)
2019-11-05 09:17:38 -08:00
Samuel Pitoiset
9bca129bb4 radv: fix compute pipeline keys when optimizations are disabled
If an app first creates a compute pipeline with
VK_PIPELINE_CREATE_DISABLE_OPTIMIZATION_BIT set, then re-compile it
without that flag, the driver should re-compile the compute shader.
Otherwise, it will return the unoptimized one.

Fixes: ce188813bf ("radv: add initial support for VK_PIPELINE_CREATE_DISABLE_OPTIMIZATION_BIT")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
(cherry picked from commit 9ab27647ff)
2019-11-05 09:17:38 -08:00
Lionel Landwerlin
6daaf66f66 mesa: check draw buffer completeness on glClearBufferfi/glClearBufferiv
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 88d665830f)
2019-11-05 09:17:38 -08:00
Bas Nieuwenhuizen
4d21f802b5 radv: Close all unnecessary fds in secure compile.
The seccomp filter allows read/write, let us make sure nobody can
do anything with this.

Fixes: cff53da374 "radv: enable secure compile support"
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
(cherry picked from commit 8efb8f55a6)
2019-11-05 09:17:38 -08:00
Daniel Schürmann
090469173c docs/relnotes/new_features.txt: Add note about ACO
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
2019-11-01 15:29:35 +01:00
Jan Zielinski
59bc14186e gallium/swr: Fix depth values for blit scenario 2019-10-31 22:15:46 +00:00
Erik Faye-Lund
5032575b94 zink: emit line-width when using polygon line-mode
When switching this to dynamic state, I forgot that this also needs to
be emitted when we use a polygon-mode set to lines.

Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Fixes: 6d30abb4f1 ("zink: use dynamic state for line-width")
(cherry picked from commit b7674829a1)
2019-10-31 15:13:51 -07:00
Alyssa Rosenzweig
b981ca4d7e pipe-loader: Build kmsro loader for with all kmsro targets
Build failure reported by i965 CI, triggered by building dynamic
pipeloaders with kmsro drivers (besides 'frost). At this point, there's
no reason to actually do that -- mesa CI didn't mind -- but let's not
break the build.

v2: Simplify script. Add extra dependencies for v3d.

Fixes: afb0d08cb0 ("pipe-loader: Default to kmsro if probe fails")
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reported-by: Clayton Craft <clayton.a.craft@intel.com>
Tested-by: Clayton Craft <clayton.a.craft@intel.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
(cherry picked from commit bf15318991)
2019-10-31 15:13:47 -07:00
Jason Ekstrand
3544a01121 anv: Set the batch allocator for compute pipelines
Otherwise relocations just up and crash.

Fixes: a3153162a9 "anv: Delay allocation of relocation lists"
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
(cherry picked from commit 9ef198c59a)
2019-10-31 15:13:43 -07:00
Jason Ekstrand
bb9d1ed2bd anv/tests: Zero-initialize instances
Some of the tests were actually relying on some of those uninitialized
bits to be non-zero.  In particular, a couple want use_softpin = true.

Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
(cherry picked from commit 9076e9f375)
2019-10-31 15:13:35 -07:00
Jason Ekstrand
5f8e0c715e anv: Fix a potential BO handle leak
Fixes: 731c4adcf9 "anv/allocator: Add support for non-userptr"
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
(cherry picked from commit bb257e1852)
2019-10-31 15:13:31 -07:00
Pierre-Eric Pelloux-Prayer
f0104d8fef mesa: enable msaa in clear_with_quad if needed
If the DrawBuffer sample count is > 1 and msaa is enabled we must also
enable msaa when clearing it.

Fixes: ea5b7de138 ("radeonsi: make gl_SampleMaskIn = 0x1 when MSAA is disabled")
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/1991

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Witold Baryluk <witold.baryluk@gmail.com>
(cherry picked from commit 8a723282e3)
2019-10-31 15:13:26 -07:00
Bas Nieuwenhuizen
cb66ea7780 radv: Fix disk_cache_get size argument.
Got some int->pointer warnings and 20 is not a valid pointer ....

Fixes: 2e3a635ee6 "radv: Add an early exit in the secure compile if we already have the cache entries."
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
(cherry picked from commit 6ced684e27)
2019-10-31 15:13:22 -07:00
Bas Nieuwenhuizen
75886fafaa anv: Remove _mesa_locale_init/fini calls.
The resulting locale is not used for Vulkan, and it is not reference
counted, giving issues when multiple instances are created.

CC: 19.2 19.3 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit 3e86d553a4)
2019-10-31 15:13:13 -07:00
Bas Nieuwenhuizen
b3fd30921a turnip: Remove _mesa_locale_init/fini calls.
The resulting locale is not used for Vulkan, and it is not reference
counted, giving issues when multiple instances are created.

CC: 19.2 19.3 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit 72f858fc07)
2019-10-31 15:13:08 -07:00
Bas Nieuwenhuizen
ea886e49be radv: Remove _mesa_locale_init/fini calls.
The resulting locale is not used for Vulkan, and it is not reference
counted, giving issues when multiple instances are created.

CC: 19.2 19.3 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit 344ba56b0f)
2019-10-31 15:13:05 -07:00
Pierre-Eric Pelloux-Prayer
307e5cc8fd radeonsi: tell the shader disk cache what IR is used
Until 8bef4df196 the IR (TGSI or NIR) was used in disk_cache driver_flags.
This commit restores this features to avoid crashing when switching from
one IR to the other.

As radeonsi's default is TGSI, I used "driver_flags & 0x8000000 = 0" for TGSI
to keep the same driver_flags.

Fixes: 8bef4df196 ("radeonsi: add si_debug_options for convenient adding/removing of options")

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
(cherry picked from commit 2afeed3010)
2019-10-31 15:13:00 -07:00
Mauro Rossi
0b8836cb23 android: aco: fix Lower to CSSA
Fixes the following building error:

external/mesa/src/amd/compiler/aco_spill.cpp:1768:
error: undefined reference to 'aco::lower_to_cssa(aco::Program*, aco::live&, radv_nir_compiler_options const*)'

Fixes: 0b8216b ("aco: Lower to CSSA")
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
(cherry picked from commit d688e4166c)
2019-10-31 15:12:56 -07:00
Jordan Justen
39e9739a3b iris/gen11+: Move flush for render target change
When starting a BLORP operation, we do the BTI-change flush.  However,
when ending it and transitioning back to regular drawing, we change the
render target again - without a set_framebuffer_state() call.  We need
to do the BTI flush there too.  BLORP flags IRIS_DIRTY_RENDER_BUFFER
now, which will cause the next draw to get the BTI flush again.

(explanation of fix by Ken)

Fixes: 2b956a093a ("iris: totally untested icelake support")
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit bb0c5c487e)
2019-10-31 15:12:52 -07:00
Jordan Justen
de705da8a6 iris: Add IRIS_DIRTY_RENDER_BUFFER state flag
Fixes: 2b956a093a ("iris: totally untested icelake support")
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit a2c3c65a31)
2019-10-31 15:12:45 -07:00
Ian Romanick
640747a298 intel/compiler: Report the number of non-spill/fill SEND messages on vec4 too
This make shader-db's report.py work on Haswell and earlier platforms.
The problem is that the script would detect the "sends" output for
scalar shaders and expect in in vec4 shaders too.  When it didn't find
it, the script would fail with:

    Traceback (most recent call last):
      File "./report.py", line 351, in <module>
        main()
      File "./report.py", line 182, in main
        before_count = before[p][m]
    KeyError: 'sends'

Fixes: f192741ddd ("intel/compiler: Report the number of non-spill/fill SEND messages")

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 7b3f38ef69)
2019-10-31 15:12:41 -07:00
Bas Nieuwenhuizen
9df4763440 radv: Fix timeout handling in syncobj wait.
libdrm returns -errno instead of directly the ioctl ret of -1.

Fixes: 1c3cda7d27 "radv: Add syncobj signal/reset/wait to winsys."
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit ec770085c2)
2019-10-31 15:12:36 -07:00
Ilia Mirkin
2b1b7afb5c nv50/ir: mark STORE destination inputs as used
Observed an issue when looking at the code generatedy by the
image-vertex-attrib-input-output piglit test. Even though the test
itself worked fine (due to TIC 0 being used for the image), this needs
to be fixed.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 1b9d1e13d8)
2019-10-31 15:12:32 -07:00
Lionel Landwerlin
084926926c intel/dev: set default num_eu_per_subslice on gen12
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 8125d7960b ("intel/dev: Add preliminary device info for Tigerlake")
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit e02c181bfd)
2019-10-31 15:12:27 -07:00
Ilia Mirkin
1beee9dd9f gm107/ir: fix loading z offset for layered 3d image bindings
Unfortuantely we don't know if a particular load is a real 2d image (as
would be a cube face or 2d array element), or a layer of a 3d image.
Since we pass in the TIC reference, the instruction's type has to match
what's in the TIC (experimentally). In order to properly support
bindless images, this also can't be done by looking at the current
bindings and generating appropriate code.

As a result all plain 2d loads are converted into a pair of 2d/3d loads,
with appropriate predicates to ensure only one of those actually
executes, and the values are all merged in.

This goes somewhat against the current flow, so for GM107 we do the OOB
handling directly in the surface processing logic. Perhaps the other
gens should do something similar, but that is left to another change.

This fixes dEQP tests like image_load_store.3d.*_single_layer and GL-CTS
tests like shader_image_load_store.non-layered_binding without breaking
anything else.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "20.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 869e32593a)
2019-10-31 08:57:33 -07:00
Dylan Baker
20512e9ddb VERSION: bump to rc1 2019-10-30 14:58:09 -07:00
13180 changed files with 1605859 additions and 4503963 deletions

View File

@@ -0,0 +1,66 @@
goto %1
:install
rem Check pip
if "%buildsystem%" == "scons" (
python --version
python -m pip --version
rem Install Mako
python -m pip install Mako==1.0.7
rem Install pywin32 extensions, needed by SCons
python -m pip install pypiwin32
rem Install python wheels, necessary to install SCons via pip
python -m pip install wheel
rem Install SCons
python -m pip install scons==3.0.1
call scons --version
) else (
python --version
python -m pip install Mako==1.0.7 meson
meson --version
rem Install pkg-config, which meson requires even on windows
cinst -y pkgconfiglite
)
rem Install flex/bison
set WINFLEXBISON_ARCHIVE=win_flex_bison-%WINFLEXBISON_VERSION%.zip
if not exist "%WINFLEXBISON_ARCHIVE%" appveyor DownloadFile "https://github.com/lexxmark/winflexbison/releases/download/v%WINFLEXBISON_VERSION%/%WINFLEXBISON_ARCHIVE%"
7z x -y -owinflexbison\ "%WINFLEXBISON_ARCHIVE%" > nul
set Path=%CD%\winflexbison;%Path%
win_flex --version
win_bison --version
rem Download and extract LLVM
if not exist "%LLVM_ARCHIVE%" appveyor DownloadFile "https://people.freedesktop.org/~jrfonseca/llvm/%LLVM_ARCHIVE%"
7z x -y "%LLVM_ARCHIVE%" > nul
if "%buildsystem%" == "scons" (
mkdir llvm\bin
set LLVM=%CD%\llvm
) else (
move llvm subprojects\
copy .appveyor\llvm-wrap.meson subprojects\llvm\meson.build
)
goto :eof
:build_script
if "%buildsystem%" == "scons" (
call scons -j%NUMBER_OF_PROCESSORS% MSVC_VERSION=14.1 llvm=1
) else (
call "C:\Program Files (x86)\Microsoft Visual Studio\2017\Community\Common7\Tools\VsDevCmd.bat" -arch=x86
rem We use default-library as static to affect any wraps (such as expat and zlib)
rem it would be better if we could set subprojects buildtype independently,
rem but I haven't written that patch yet :)
call meson builddir --backend=vs2017 --default-library=static -Dbuild-tests=true -Db_vscrt=mtd --buildtype=release -Dllvm=true -Dgallium-drivers=swrast -Dosmesa=gallium
pushd builddir
call msbuild mesa.sln /m
popd
)
goto :eof
:test_script
if "%buildsystem%" == "scons" (
call scons -j%NUMBER_OF_PROCESSORS% MSVC_VERSION=14.1 llvm=1 check
) else (
call meson test -C builddir
)
goto :eof

36
.appveyor/llvm-wrap.meson Normal file
View File

@@ -0,0 +1,36 @@
# A meson.build file for binary wrapping the LLVM used in the appvyeor CI
project('llvm', ['cpp'])
cpp = meson.get_compiler('cpp')
_deps = []
_search = join_paths(meson.current_source_dir(), 'lib')
foreach d : ['LLVMAnalysis', 'LLVMAsmParser', 'LLVMAsmPrinter',
'LLVMBinaryFormat', 'LLVMBitReader', 'LLVMBitWriter',
'LLVMCodeGen', 'LLVMCore', 'LLVMCoroutines', 'LLVMCoverage',
'LLVMDebugInfoCodeView', 'LLVMDebugInfoDWARF',
'LLVMDebugInfoMSF', 'LLVMDebugInfoPDB', 'LLVMDemangle',
'LLVMDlltoolDriver', 'LLVMExecutionEngine', 'LLVMGlobalISel',
'LLVMInstCombine', 'LLVMInstrumentation', 'LLVMInterpreter',
'LLVMipo', 'LLVMIRReader', 'LLVMLibDriver', 'LLVMLineEditor',
'LLVMLinker', 'LLVMLTO', 'LLVMMCDisassembler', 'LLVMMCJIT',
'LLVMMC', 'LLVMMCParser', 'LLVMMIRParser', 'LLVMObjCARCOpts',
'LLVMObject', 'LLVMObjectYAML', 'LLVMOption', 'LLVMOrcJIT',
'LLVMPasses', 'LLVMProfileData', 'LLVMRuntimeDyld',
'LLVMScalarOpts', 'LLVMSelectionDAG', 'LLVMSupport',
'LLVMSymbolize', 'LLVMTableGen', 'LLVMTarget',
'LLVMTransformUtils', 'LLVMVectorize', 'LLVMX86AsmParser',
'LLVMX86AsmPrinter', 'LLVMX86CodeGen', 'LLVMX86Desc',
'LLVMX86Disassembler', 'LLVMX86Info', 'LLVMX86Utils',
'LLVMXRay']
_deps += cpp.find_library(d, dirs : _search)
endforeach
dep_llvm = declare_dependency(
include_directories : include_directories('include'),
dependencies : _deps,
version : '5.0.1',
)
has_rtti = false
irbuilder_h = files('include/llvm/IR/IRBuilder.h')

View File

View File

View File

View File

View File

View File

View File

View File

View File

View File

View File

View File

@@ -1,2 +0,0 @@
# Vendored code
src/amd/vulkan/radix_sort/*

View File

@@ -1,10 +0,0 @@
# The following files are opted into `ninja clang-format` and
# enforcement in the CI.
src/gallium/drivers/i915
src/gallium/drivers/r300/compiler/*
src/gallium/targets/teflon/**/*
src/amd/vulkan/**/*
src/amd/compiler/**/*
src/egl/**/*
src/etnaviv/isa/**/*

View File

@@ -8,7 +8,7 @@ charset = utf-8
insert_final_newline = true
tab_width = 8
[*.{c,h,cpp,hpp,cc,hh,y,yy}]
[*.{c,h,cpp,hpp,cc,hh}]
indent_style = space
indent_size = 3
max_line_length = 78
@@ -16,29 +16,25 @@ max_line_length = 78
[{Makefile*,*.mk}]
indent_style = tab
[*.py]
[{*.py,SCons*}]
indent_style = space
indent_size = 4
[*.pl]
indent_style = space
indent_size = 4
[*.m4]
indent_style = space
indent_size = 2
[*.yml]
indent_style = space
indent_size = 2
[*.rst]
indent_style = space
indent_size = 3
[*.patch]
trim_trailing_whitespace = false
[{meson.build,meson.options}]
[{meson.build,meson_options.txt}]
indent_style = space
indent_size = 2
[*.ps1]
indent_style = space
indent_size = 2
[*.rs]
indent_style = space
indent_size = 4

View File

@@ -1,79 +0,0 @@
# List of commits to ignore when using `git blame`.
# Enable with:
# git config blame.ignoreRevsFile .git-blame-ignore-revs
#
# Per git-blame(1):
# Ignore revisions listed in the file, one unabbreviated object name
# per line, in git-blame. Whitespace and comments beginning with # are
# ignored.
#
# Please keep these in chronological order :)
#
# You can add a new commit with the following command:
# git log -1 --pretty=format:'%n# %s%n%H%n' >> .git-blame-ignore-revs $COMMIT
# pvr: Fix clang-format error.
0ad5b0a74ef73f5fcbe1406ad9d57fe5dc00a5b1
# panfrost: Fix up some formatting for clang-format
a4705afe63412498d13ded73cba969c66be67907
# asahi: clang-format the world again
26c51bb8d8a33098b1990425a391f56ffba5728c
# perfetto: Add a .clang-format for the directory.
da78d5d729b1800136dd713b68492cb339993f4a
# panfrost/winsys: Clang-format
c90f036516a5376002be6550a917e8bad6a8a3b8
# panfrost: Re-run clang-format
4ccf174009af6732cbffa5d8ebb4687da7517505
# panvk: Clang-format
c7bf3b69ebc8f2252dbf724a4de638e6bb2ac402
# pan/mdg: Fix icky formatting
133af0d6c945d3aaca8989edd15283a2b7dcc6c7
# mapi: clang-format _glapi_add_dispatch()
30332529663268a6406e910848e906e725e6fda7
# radv: reformat according to its .clang-format
8b319c6db8bd93603b18bd783eb75225fcfd51b7
# aco: reformat according to its .clang-format
6b21653ab4d3a67e711fe10e3d403128b6d26eb2
# egl: re-format using clang-format
2f670d89db038d5a29f6b72732fd7ad63dfaf4c6
# panfrost: clang-format the tree
0afd691f29683f6e9dde60f79eca094373521806
# aco: Format.
1e2639026fec7069806449f9ba2a124ce4eb5569
# radv: Format.
59c501ca353f8ec9d2717c98af2bfa1a1dbf4d75
# pvr: clang-format fixes
953c04ebd39c52d457301bdd8ac803949001da2d
# freedreno: Re-indent
2d439343ea1aee146d4ce32800992cd389bd505d
# ir3: Reformat source with clang-format
177138d8cb0b4f6a42ef0a1f8593e14d79f17c54
# ir3: reformat after refactoring in previous commit
8ae5b27ee0331a739d14b42e67586784d6840388
# ir3: don't use deprecated NIR_PASS_V anymore
2fedc82c0cc9d3fb2e54707b57941b79553b640c
# ir3: reformat after previous commit
7210054db8cfb445a8ccdeacfdcfecccf44fa266
# freedreno/a6xx: The great register renaming
7fd99c88b9cd5c0c8c1cb3e92383acac5cb8220b

7
.gitattributes vendored
View File

@@ -1,7 +0,0 @@
*.csv eol=crlf
* text=auto
*.jpg binary
*.png binary
*.gif binary
*.ico binary
*.cl gitlab-language=c

View File

@@ -1,60 +0,0 @@
name: macOS-CI
on: push
permissions:
contents: read
jobs:
macOS-CI:
strategy:
matrix:
glx_option: ['dri', 'xlib']
runs-on: macos-11
env:
GALLIUM_DUMP_CPU: true
MESON_EXEC: /Users/runner/Library/Python/3.11/bin/meson
steps:
- name: Checkout
uses: actions/checkout@v3
- name: Install Dependencies
run: |
cat > Brewfile <<EOL
brew "bison"
brew "expat"
brew "gettext"
brew "libx11"
brew "libxcb"
brew "libxdamage"
brew "libxext"
brew "molten-vk"
brew "ninja"
brew "pkg-config"
brew "python@3.10"
EOL
brew update
brew bundle --verbose
- name: Install Mako and meson
run: pip3 install --user mako meson
- name: Configure
run: |
cat > native_config <<EOL
[binaries]
llvm-config = '/usr/local/opt/llvm/bin/llvm-config'
EOL
$MESON_EXEC . build --native-file=native_config -Dmoltenvk-dir=$(brew --prefix molten-vk) -Dbuild-tests=true -Dgallium-drivers=swrast,zink -Dglx=${{ matrix.glx_option }}
- name: Build
run: $MESON_EXEC compile -C build
- name: Test
run: $MESON_EXEC test -C build --print-errorlogs
- name: Install
run: $MESON_EXEC install -C build --destdir $PWD/install
- name: 'Upload Artifact'
if: always()
uses: actions/upload-artifact@v3
with:
name: macos-${{ matrix.glx_option }}-result
path: |
build/meson-logs/
install/
retention-days: 5

5
.gitignore vendored
View File

@@ -1,7 +1,4 @@
.cache
.vscode*
*.pyc
*.pyo
*.out
/build
.venv/
build

View File

@@ -1,437 +1,532 @@
# Types of CI pipelines:
# | pipeline name | context | description |
# |----------------------|-----------|-------------------------------------------------------------|
# | merge pipeline | mesa/mesa | pipeline running for an MR; if it passes the MR gets merged |
# | pre-merge pipeline | mesa/mesa | same as above, except its status doesn't affect the MR |
# | post-merge pipeline | mesa/mesa | pipeline immediately after merging |
# | fork pipeline | fork | pipeline running in a user fork |
# | scheduled pipeline | mesa/mesa | nightly pipelines, running every morning at 4am UTC |
# | direct-push pipeline | mesa/mesa | when commits are pushed directly to mesa/mesa, bypassing Marge and its gating pipeline |
# This is the tag of the docker image used for the build jobs. If the
# image doesn't exist yet, the containers stage generates it.
#
# Note that the release branches maintained by the release manager fall under
# the "direct push" category.
# In order to generate a new image, one should generally change the tag.
# While removing the image from the registry would also work, that's not
# recommended except for ephemeral images during development: Replacing
# an image after a significant amount of time might pull in newer
# versions of gcc/clang or other packages, which might break the build
# with older commits using the same tag.
#
# "context" indicates the permissions that the jobs get; notably, any
# container created in mesa/mesa gets pushed immediately for everyone to use
# as soon as the image tag change is merged.
#
# Merge pipelines contain all jobs that must pass before the MR can be merged.
# Pre-merge pipelines contain the exact same jobs as merge pipelines.
# Post-merge pipelines contain *only* the `pages` job that deploys the new
# version of the website.
# Fork pipelines contain everything.
# Scheduled pipelines only contain the container+build jobs, and some extra
# test jobs (typically "full" variants of pre-merge jobs that only run 1/X
# test cases), but not a repeat of the merge pipeline jobs.
# Direct-push pipelines contain the same jobs as merge pipelines.
workflow:
rules:
# do not duplicate pipelines on merge pipelines
- if: $CI_COMMIT_BRANCH && $CI_OPEN_MERGE_REQUESTS && $CI_PIPELINE_SOURCE == "push"
when: never
# Tag pipelines are disabled as it's too late to run all the tests by
# then, the release has been made based on the staging pipelines results
- if: $CI_COMMIT_TAG
when: never
# Merge pipeline
- if: &is-merge-attempt $GITLAB_USER_LOGIN == "marge-bot" && $CI_PIPELINE_SOURCE == "merge_request_event"
variables:
MESA_CI_PERFORMANCE_ENABLED: 1
FDO_RUNNER_JOB_PRIORITY_TAG_X86_64: priority:high
FDO_RUNNER_JOB_PRIORITY_TAG_X86_64_KVM: priority:high-kvm
FDO_RUNNER_JOB_PRIORITY_TAG_AARCH64: priority:high-aarch64
CI_TRON_JOB_PRIORITY_TAG: "" # Empty tags are ignored by gitlab
JOB_PRIORITY: 75
# fast-fail in merge pipelines: stop early if we get this many unexpected fails/crashes
DEQP_RUNNER_MAX_FAILS: 40
# Post-merge pipeline
- if: &is-post-merge $GITLAB_USER_LOGIN == "marge-bot" && $CI_PIPELINE_SOURCE == "push"
variables:
FDO_RUNNER_JOB_PRIORITY_TAG_X86_64: priority:high
FDO_RUNNER_JOB_PRIORITY_TAG_X86_64_KVM: priority:high-kvm
FDO_RUNNER_JOB_PRIORITY_TAG_AARCH64: priority:high-aarch64
# Pre-merge pipeline (because merge pipelines are already caught above)
- if: &is-merge-request $CI_PIPELINE_SOURCE == "merge_request_event"
# Push to a branch on a fork
- if: &is-push-to-fork $CI_PROJECT_NAMESPACE != "mesa" && $CI_PIPELINE_SOURCE == "push"
# a pipeline running within the upstream project
- if: &is-upstream-pipeline $CI_PROJECT_PATH == $FDO_UPSTREAM_REPO
# an MR pipeline running within the upstream project, usually true for
# those with the Developer role or above
- if: &is-upstream-mr-pipeline $CI_PROJECT_PATH == $FDO_UPSTREAM_REPO && $CI_PIPELINE_SOURCE == "merge_request_event"
# Nightly pipeline
- if: &is-scheduled-pipeline $CI_PIPELINE_SOURCE == "schedule"
variables:
FDO_RUNNER_JOB_PRIORITY_TAG_X86_64: priority:low
FDO_RUNNER_JOB_PRIORITY_TAG_X86_64_KVM: priority:low-kvm
FDO_RUNNER_JOB_PRIORITY_TAG_AARCH64: priority:low-aarch64
JOB_PRIORITY: 45
# (some) nightly builds perform LTO, so they take much longer than the
# short timeout allowed in other pipelines.
# Note: 0 = infinity = gitlab's job `timeout:` applies, which is 1h
BUILD_JOB_TIMEOUT_OVERRIDE: 0
# Pipeline for direct pushes to the default branch that bypassed the CI
- if: &is-push-to-upstream-default-branch $CI_PROJECT_NAMESPACE == "mesa" && $CI_PIPELINE_SOURCE == "push" && $CI_COMMIT_REF_NAME == $CI_DEFAULT_BRANCH
variables:
JOB_PRIORITY: 70
# Pipeline for direct pushes from release maintainer
- if: &is-push-to-upstream-staging-branch $CI_PROJECT_NAMESPACE == "mesa" && $CI_PIPELINE_SOURCE == "push" && $CI_COMMIT_REF_NAME =~ /^staging\//
variables:
JOB_PRIORITY: 70
# After merging a change resulting in generating a new image to the
# main repository, it's recommended to remove the image from the source
# repository's container registry, so that the image from the main
# repository's registry will be used there as well.
variables:
FDO_UPSTREAM_REPO: mesa/mesa
MESA_TEMPLATES_COMMIT: &ci-templates-commit c6aeb16f86e32525fa630fb99c66c4f3e62fc3cb
CI_PRE_CLONE_SCRIPT: |-
set -o xtrace
curl --silent --location --fail --retry-connrefused --retry 3 --retry-delay 10 \
${CI_PROJECT_URL}/-/raw/${CI_COMMIT_SHA}/.gitlab-ci/download-git-cache.sh | bash
set +o xtrace
S3_JWT_FILE: /s3_jwt
S3_JWT_FILE_SCRIPT: |-
echo -n '${S3_JWT}' > '${S3_JWT_FILE}' &&
S3_JWT_FILE_SCRIPT= &&
unset CI_JOB_JWT S3_JWT # Unsetting vulnerable env variables
S3_HOST: s3.freedesktop.org
# This bucket is used to fetch ANDROID prebuilts and images
S3_ANDROID_BUCKET: mesa-rootfs
# This bucket is used to fetch the kernel image
S3_KERNEL_BUCKET: mesa-rootfs
# Bucket for git cache
S3_GITCACHE_BUCKET: git-cache
# Bucket for the pipeline artifacts pushed to S3
S3_ARTIFACTS_BUCKET: artifacts
# Buckets for traces
S3_TRACIE_RESULTS_BUCKET: mesa-tracie-results
S3_TRACIE_PUBLIC_BUCKET: mesa-tracie-public
S3_TRACIE_PRIVATE_BUCKET: mesa-tracie-private
# Base path used for various artifacts
S3_BASE_PATH: "${S3_HOST}/${S3_KERNEL_BUCKET}"
# per-pipeline artifact storage on MinIO
PIPELINE_ARTIFACTS_BASE: ${S3_HOST}/${S3_ARTIFACTS_BUCKET}/${CI_PROJECT_PATH}/${CI_PIPELINE_ID}
# per-job artifact storage on MinIO
JOB_ARTIFACTS_BASE: ${PIPELINE_ARTIFACTS_BASE}/${CI_JOB_ID}
# reference images stored for traces
PIGLIT_REPLAY_REFERENCE_IMAGES_BASE: "${S3_HOST}/${S3_TRACIE_RESULTS_BUCKET}/$FDO_UPSTREAM_REPO"
# For individual CI farm status see .ci-farms folder
# Disable farm with `git mv .ci-farms{,-disabled}/$farm_name`
# Re-enable farm with `git mv .ci-farms{-disabled,}/$farm_name`
# NEVER MIX FARM MAINTENANCE WITH ANY OTHER CHANGE IN THE SAME MERGE REQUEST!
ARTIFACTS_BASE_URL: https://${CI_PROJECT_ROOT_NAMESPACE}.${CI_PAGES_DOMAIN}/-/${CI_PROJECT_NAME}/-/jobs/${CI_JOB_ID}/artifacts
# Python scripts for structured logger
PYTHONPATH: "$PYTHONPATH:$CI_PROJECT_DIR/install"
# No point in continuing once the device is lost
MESA_VK_ABORT_ON_DEVICE_LOSS: 1
# Avoid the wall of "Unsupported SPIR-V capability" warnings in CI job log, hiding away useful output
MESA_SPIRV_LOG_LEVEL: error
# Default priority for non-merge pipelines
FDO_RUNNER_JOB_PRIORITY_TAG_X86_64: "" # Empty tags are ignored by gitlab
FDO_RUNNER_JOB_PRIORITY_TAG_X86_64_KVM: kvm
FDO_RUNNER_JOB_PRIORITY_TAG_AARCH64: aarch64
CI_TRON_JOB_PRIORITY_TAG: ci-tron:priority:low
JOB_PRIORITY: 50
DATA_STORAGE_PATH: data_storage
KERNEL_IMAGE_BASE: "https://$S3_HOST/$S3_KERNEL_BUCKET/$KERNEL_REPO/$KERNEL_TAG"
# Mesa-specific variables that shouldn't be forwarded to DUTs and crosvm
CI_EXCLUDE_ENV_VAR_REGEX: 'SCRIPTS_DIR|RESULTS_DIR'
CI_TRON_JOB_TEMPLATE_PROJECT: &ci-tron-template-project gfx-ci/ci-tron
CI_TRON_JOB_TEMPLATE_COMMIT: &ci-tron-template-commit ddadab0006e43f1365cd30779f565b444a6538ee
CI_TRON_JOB_TEMPLATE_PROJECT_URL: "https://gitlab.freedesktop.org/$CI_TRON_JOB_TEMPLATE_PROJECT"
default:
timeout: 1m # catch any jobs which don't specify a timeout
id_tokens:
S3_JWT:
aud: https://s3.freedesktop.org
before_script:
- >
export SCRIPTS_DIR=$(mktemp -d) &&
curl -L -s --retry 4 -f --retry-all-errors --retry-delay 60 -O --output-dir "${SCRIPTS_DIR}" "${CI_PROJECT_URL}/-/raw/${CI_COMMIT_SHA}/.gitlab-ci/setup-test-env.sh" &&
. ${SCRIPTS_DIR}/setup-test-env.sh
- eval "$S3_JWT_FILE_SCRIPT"
after_script:
# Work around https://gitlab.com/gitlab-org/gitlab/-/issues/20338
- find -name '*.log' -exec mv {} {}.txt \;
# Retry when job fails. Failed jobs can be found in the Mesa CI Daily Reports:
# https://gitlab.freedesktop.org/mesa/mesa/-/issues/?sort=created_date&state=opened&label_name%5B%5D=CI%20daily
retry:
max: 1
# Ignore runner_unsupported, stale_schedule, archived_failure, or
# unmet_prerequisites
when:
- api_failure
- runner_system_failure
- script_failure
- job_execution_timeout
- scheduler_failure
- data_integrity_failure
- unknown_failure
stages:
- sanity
- container
- git-archive
- build-for-tests
- build-only
- code-validation
- amd
- amd-nightly
- intel
- intel-nightly
- nouveau
- nouveau-nightly
- arm
- arm-nightly
- broadcom
- broadcom-nightly
- freedreno
- freedreno-nightly
- etnaviv
- etnaviv-nightly
- software-renderer
- software-renderer-nightly
- layered-backends
- layered-backends-nightly
- performance
- deploy
UPSTREAM_REPO: mesa/mesa
DEBIAN_TAG: "2019-10-29"
DEBIAN_ARM64_TAG: "arm64v8-2019-10-23"
STRETCH_TAG: "2019-09-18"
DEBIAN_VERSION: buster-slim
STRETCH_VERSION: stretch-slim
DEBIAN_IMAGE: "$CI_REGISTRY_IMAGE/debian/$DEBIAN_VERSION:$DEBIAN_TAG"
DEBIAN_ARM64_IMAGE: "$CI_REGISTRY_IMAGE/debian/$DEBIAN_VERSION:$DEBIAN_ARM64_TAG"
STRETCH_IMAGE: "$CI_REGISTRY_IMAGE/debian/$STRETCH_VERSION:$STRETCH_TAG"
include:
- project: 'freedesktop/ci-templates'
ref: *ci-templates-commit
file:
- '/templates/alpine.yml'
- '/templates/debian.yml'
- '/templates/fedora.yml'
- '/templates/ci-fairy.yml'
- project: *ci-tron-template-project
ref: *ci-tron-template-commit
file: '/.gitlab-ci/dut.yml'
- local: '.gitlab-ci/image-tags.yml'
- local: '.gitlab-ci/bare-metal/gitlab-ci.yml'
- local: '.gitlab-ci/ci-tron/gitlab-ci.yml'
- local: '.gitlab-ci/lava/gitlab-ci.yml'
- local: '.gitlab-ci/container/gitlab-ci.yml'
- local: '.gitlab-ci/build/gitlab-ci.yml'
- local: '.gitlab-ci/test/gitlab-ci.yml'
- local: '.gitlab-ci/farm-rules.yml'
- local: '.gitlab-ci/test-source-dep.yml'
- local: 'docs/gitlab-ci.yml'
- local: 'src/**/ci/gitlab-ci.yml'
- project: 'wayland/ci-templates'
ref: 1f7f57c64ff4ebbf7292e3b7a13600518b8cb24c
file: '/templates/debian.yml'
include:
- local: '.gitlab-ci/lava-gitlab-ci.yml'
stages:
- container
- build
- test
# Rules applied to every job in the pipeline
.common-rules:
rules:
- if: *is-push-to-fork
when: manual
# When to automatically run the CI
.ci-run-policy:
only:
refs:
- branches@mesa/mesa
- merge_requests
- /^ci([-/].*)?$/
changes:
- VERSION
- bin/**/*
# GitLab CI
- .gitlab-ci.yml
- .gitlab-ci/**/*
# Meson
- meson*
- build-support/**/*
- subprojects/**/*
# SCons
- SConstruct
- scons/**/*
- common.py
# Source code
- include/**/*
- src/**/*
retry:
max: 2
when:
- runner_system_failure
.never-post-merge-rules:
rules:
- if: *is-post-merge
when: never
.ci-deqp-artifacts:
artifacts:
when: always
untracked: false
paths:
# Watch out! Artifacts are relative to the build dir.
# https://gitlab.com/gitlab-org/gitlab-ce/commit/8788fb925706cad594adf6917a6c5f6587dd1521
- artifacts
# Build the normal CI native and cross-build docker images.
# Note: make sure the branches in this list are the same as in
# `.build-only-delayed-rules` below.
.container-rules:
rules:
- !reference [.common-rules, rules]
# Run when re-enabling a disabled farm, but not when disabling it
- !reference [.disable-farm-mr-rules, rules]
# Never run immediately after merging, as we just ran everything
- !reference [.never-post-merge-rules, rules]
# Only rebuild containers in merge pipelines if any tags have been
# changed, else we'll just use the already-built containers
- if: *is-merge-attempt
changes: &image_tags_path
- .gitlab-ci/image-tags.yml
when: on_success
# Skip everything for pre-merge and merge pipelines which don't change
# anything in the build; we only do this for marge-bot and not user
# pipelines in a MR, because we might still need to run it to copy the
# container into the user's namespace.
- if: *is-merge-attempt
when: never
# Any MR pipeline which changes image-tags.yml needs to be able to
# rebuild the containers
- if: *is-merge-request
changes: *image_tags_path
when: manual
# ... if the MR pipeline runs as mesa/mesa and does not need a container
# rebuild, we can skip it
- if: *is-upstream-mr-pipeline
when: never
# ... however for MRs running inside the user namespace, we may need to
# run these jobs to copy the container images from upstream
- if: *is-merge-request
when: manual
# Build everything after someone bypassed the CI
- if: *is-push-to-upstream-default-branch
when: on_success
# Build everything when pushing to staging branches
- if: *is-push-to-upstream-staging-branch
when: on_success
# Scheduled pipelines reuse already-built containers
- if: *is-scheduled-pipeline
when: never
# Any other pipeline in the upstream should reuse already-built containers
- if: *is-upstream-pipeline
when: never
# Allow building everything in fork pipelines, but build nothing unless
# manually triggered
- when: manual
# Note: make sure the branches in this list are the same as in
# `.build-only-delayed-rules` below.
.build-rules:
rules:
- !reference [.common-rules, rules]
# Run when re-enabling a disabled farm, but not when disabling it
- !reference [.disable-farm-mr-rules, rules]
# Never run immediately after merging, as we just ran everything
- !reference [.never-post-merge-rules, rules]
# Build everything in merge pipelines, if any files affecting the pipeline
# were changed
- if: *is-merge-attempt
changes: &all_paths
- VERSION
- bin/git_sha1_gen.py
- bin/install_megadrivers.py
- bin/symbols-check.py
- bin/ci/**/*
# GitLab CI
- .gitlab-ci.yml
- .gitlab-ci/**/*
- .ci-farms/*
# Meson
- meson*
- build-support/**/*
- subprojects/**/*
# clang format
- .clang-format
- .clang-format-include
- .clang-format-ignore
# Source code
- include/**/*
- src/**/*
when: on_success
# Same as above, but for pre-merge pipelines
- if: *is-merge-request
changes: *all_paths
when: manual
# Skip everything for pre-merge and merge pipelines which don't change
# anything in the build
- if: *is-merge-attempt
when: never
- if: *is-merge-request
when: never
# Build everything after someone bypassed the CI
- if: *is-push-to-upstream-default-branch
when: on_success
# Build everything when pushing to staging branches
- if: *is-push-to-upstream-staging-branch
when: on_success
# Build everything in scheduled pipelines
- if: *is-scheduled-pipeline
when: on_success
# Allow building everything in fork pipelines, but build nothing unless
# manually triggered
- when: manual
# Repeat of the above but with `when: on_success` replaced with
# `when: delayed` + `start_in:`, for build-only jobs.
# Note: make sure the branches in this list are the same as in
# `.container+build-rules` above.
.build-only-delayed-rules:
rules:
- !reference [.common-rules, rules]
# Run when re-enabling a disabled farm, but not when disabling it
- !reference [.disable-farm-mr-rules, rules]
# Never run immediately after merging, as we just ran everything
- !reference [.never-post-merge-rules, rules]
# Build everything in merge pipelines, if any files affecting the pipeline
# were changed
- if: *is-merge-attempt
changes: *all_paths
when: delayed
start_in: &build-delay 5 minutes
# Same as above, but for pre-merge pipelines
- if: *is-merge-request
changes: *all_paths
when: manual
# Skip everything for pre-merge and merge pipelines which don't change
# anything in the build
- if: *is-merge-attempt
when: never
- if: *is-merge-request
when: never
# Build everything after someone bypassed the CI
- if: *is-push-to-upstream-default-branch
when: delayed
start_in: *build-delay
# Build everything when pushing to staging branches
- if: *is-push-to-upstream-staging-branch
when: delayed
start_in: *build-delay
# Build everything in scheduled pipelines
- if: *is-scheduled-pipeline
when: delayed
start_in: *build-delay
# Allow building everything in fork pipelines, but build nothing unless
# manually triggered
- when: manual
# Sanity checks of MR settings and commit logs
sanity:
.container:
stage: container
extends:
- .fdo.ci-fairy
stage: sanity
tags:
- placeholder-job
rules:
- if: *is-merge-request
when: on_success
- when: never
- .ci-run-policy
variables:
# no need to pull the whole repo to build the container image
GIT_STRATEGY: none
debian-10:amd64:
extends:
- .debian@container-ifnot-exists
- .container
variables:
DEBIAN_EXEC: 'bash .gitlab-ci/debian-install.sh'
.use-debian-10:amd64:
image: $DEBIAN_IMAGE
needs:
- debian-10:amd64
debian-9:amd64:
extends: debian-10:amd64
variables:
DEBIAN_TAG: $STRETCH_TAG
DEBIAN_VERSION: $STRETCH_VERSION
DEBIAN_IMAGE: $STRETCH_IMAGE
DEBIAN_EXEC: 'bash .gitlab-ci/debian-stretch-install.sh'
.use-debian-9:amd64:
image: $STRETCH_IMAGE
needs:
- debian-9:amd64
debian-10:arm64:
extends:
- .debian@container-ifnot-exists@arm64v8
- .container
variables:
DEBIAN_TAG: "$DEBIAN_ARM64_TAG"
DEBIAN_EXEC: 'bash .gitlab-ci/debian-arm64-install.sh'
# BUILD
# Shared between windows and Linux
.build-common:
extends: .ci-run-policy
stage: build
artifacts:
when: always
paths:
- _build/meson-logs/*.txt
# scons:
- build/*/config.log
- shader-db
# Just Linux
.build-linux:
extends: .build-common
cache:
key: ${CI_JOB_NAME}
paths:
- ccache
variables:
CCACHE_COMPILERCHECK: "content"
# Use ccache transparently, and print stats before/after
before_script:
- export PATH="/usr/lib/ccache:$PATH"
- export CCACHE_BASEDIR="$PWD"
- export CCACHE_DIR="$PWD/ccache"
- ccache --max-size=1500M
- ccache --zero-stats || true
- ccache --show-stats || true
after_script:
# In case the install dir is being saved as artifacts, tar it up
# so that symlinks and hardlinks aren't each packed separately in
# the zip file.
- if [ -d install ]; then
tar -cf artifacts/install.tar install;
fi
- export CCACHE_DIR="$PWD/ccache"
- ccache --show-stats
.build-windows:
extends: .build-common
tags:
- mesa-windows
cache:
key: ${CI_JOB_NAME}
paths:
- subprojects/packagecache
.meson-build:
extends:
- .build-linux
- .use-debian-10:amd64
script:
# ci-fairy check-commits --junit-xml=check-commits.xml
- ci-fairy check-merge-request --require-allow-collaboration --junit-xml=check-merge-request.xml
- |
set -eu
image_tags=(
ALPINE_X86_64_BUILD_TAG
ALPINE_X86_64_LAVA_SSH_TAG
ALPINE_X86_64_LAVA_TRIGGER_TAG
DEBIAN_BASE_TAG
DEBIAN_BUILD_TAG
DEBIAN_TEST_ANDROID_TAG
DEBIAN_TEST_GL_TAG
DEBIAN_TEST_VK_TAG
FEDORA_X86_64_BUILD_TAG
FIRMWARE_TAG
KERNEL_TAG
PKG_REPO_REV
WINDOWS_X64_BUILD_TAG
WINDOWS_X64_MSVC_TAG
WINDOWS_X64_TEST_TAG
)
for var in "${image_tags[@]}"
do
if [ "$(echo -n "${!var}" | wc -c)" -gt 20 ]
then
echo "$var is too long; please make sure it is at most 20 chars."
exit 1
fi
done
- .gitlab-ci/meson-build.sh
.scons-build:
extends:
- .build-linux
- .use-debian-10:amd64
variables:
SCONSFLAGS: "-j4"
script:
- .gitlab-ci/scons-build.sh
meson-main:
extends:
- .meson-build
- .ci-deqp-artifacts
variables:
UNWIND: "true"
DRI_LOADERS: >
-D glx=dri
-D gbm=true
-D egl=true
-D platforms=x11,wayland,drm,surfaceless
DRI_DRIVERS: "i915,i965,r100,r200,nouveau"
GALLIUM_ST: >
-D dri3=true
-D gallium-extra-hud=true
-D gallium-vdpau=true
-D gallium-xvmc=true
-D gallium-omx=bellagio
-D gallium-va=true
-D gallium-xa=true
-D gallium-nine=true
-D gallium-opencl=disabled
GALLIUM_DRIVERS: "iris,nouveau,kmsro,r300,r600,freedreno,swrast,svga,v3d,vc4,virgl,etnaviv,panfrost,lima,zink"
LLVM_VERSION: "7"
EXTRA_OPTION: >
-D osmesa=gallium
-D tools=all
MESON_SHADERDB: "true"
BUILDTYPE: "debugoptimized"
.meson-cross:
extends:
- .meson-build
variables:
UNWIND: "false"
DRI_LOADERS: >
-D glx=disabled
-D gbm=false
-D egl=true
-D platforms=surfaceless
-D osmesa=none
GALLIUM_ST: >
-D dri3=false
-D gallium-vdpau=false
-D gallium-xvmc=false
-D gallium-omx=disabled
-D gallium-va=false
-D gallium-xa=false
-D gallium-nine=false
.meson-arm:
extends: .meson-cross
image: $DEBIAN_ARM64_IMAGE
variables:
VULKAN_DRIVERS: freedreno
GALLIUM_DRIVERS: "etnaviv,freedreno,kmsro,lima,nouveau,panfrost,swrast,tegra,v3d,vc4"
EXTRA_OPTION: >
-D I-love-half-baked-turnips=true
needs:
- debian-10:arm64
tags:
- aarch64
meson-armhf:
extends: .meson-arm
variables:
CROSS: armhf
LLVM_VERSION: "7"
meson-arm64:
extends:
- .meson-arm
- .ci-deqp-artifacts
variables:
BUILDTYPE: "debugoptimized"
# NOTE: Building SWR is 2x (yes two) times slower than all the other
# gallium drivers combined.
# Start this early so that it doesn't limit the total run time.
#
# We also stick the glvnd build here, since we want non-glvnd in
# meson-main for actual driver CI.
meson-swr-glvnd:
extends: .meson-build
variables:
UNWIND: "true"
DRI_LOADERS: >
-D glvnd=true
-D egl=true
GALLIUM_ST: >
-D dri3=true
-D gallium-vdpau=false
-D gallium-xvmc=false
-D gallium-omx=disabled
-D gallium-va=false
-D gallium-xa=false
-D gallium-nine=false
-D gallium-opencl=disabled
GALLIUM_DRIVERS: "swr,iris"
LLVM_VERSION: "6.0"
meson-clang:
extends: .meson-build
variables:
UNWIND: "true"
DRI_DRIVERS: "auto"
GALLIUM_DRIVERS: "auto"
VULKAN_DRIVERS: intel,amd,freedreno
CC: "ccache clang-8"
CXX: "ccache clang++-8"
.meson-windows:
extends:
- .build-windows
before_script:
- $ENV:ARCH = "x86"
- $ENV:VERSION = "2019\Community"
script:
- cmd /C .gitlab-ci\meson-build.bat
scons-swr:
extends: .scons-build
variables:
SCONS_TARGET: "swr=1"
SCONS_CHECK_COMMAND: "true"
LLVM_VERSION: "6.0"
scons-win64:
extends: .scons-build
variables:
SCONS_TARGET: platform=windows machine=x86_64
SCONS_CHECK_COMMAND: "true"
meson-clover:
extends: .meson-build
variables:
UNWIND: "true"
DRI_LOADERS: >
-D glx=disabled
-D egl=false
-D gbm=false
GALLIUM_ST: >
-D dri3=false
-D gallium-vdpau=false
-D gallium-xvmc=false
-D gallium-omx=disabled
-D gallium-va=false
-D gallium-xa=false
-D gallium-nine=false
-D gallium-opencl=icd
script:
- export GALLIUM_DRIVERS="r600,radeonsi"
- .gitlab-ci/meson-build.sh
- LLVM_VERSION=8 .gitlab-ci/meson-build.sh
- export GALLIUM_DRIVERS="i915,r600"
- LLVM_VERSION=6.0 .gitlab-ci/meson-build.sh
- LLVM_VERSION=7 .gitlab-ci/meson-build.sh
meson-clover-old-llvm:
extends:
- meson-clover
- .use-debian-9:amd64
variables:
UNWIND: "false"
DRI_LOADERS: >
-D glx=disabled
-D egl=false
-D gbm=false
-D platforms=drm,surfaceless
GALLIUM_DRIVERS: "i915,r600"
script:
- LLVM_VERSION=3.9 .gitlab-ci/meson-build.sh
- LLVM_VERSION=4.0 .gitlab-ci/meson-build.sh
- LLVM_VERSION=5.0 .gitlab-ci/meson-build.sh
meson-vulkan:
extends: .meson-build
variables:
UNWIND: "false"
DRI_LOADERS: >
-D glx=disabled
-D gbm=false
-D egl=false
-D platforms=x11,wayland,drm
-D osmesa=none
GALLIUM_ST: >
-D dri3=true
-D gallium-vdpau=false
-D gallium-xvmc=false
-D gallium-omx=disabled
-D gallium-va=false
-D gallium-xa=false
-D gallium-nine=false
-D gallium-opencl=disabled
-D b_sanitize=undefined
-D c_args=-fno-sanitize-recover=all
-D cpp_args=-fno-sanitize-recover=all
UBSAN_OPTIONS: "print_stacktrace=1"
VULKAN_DRIVERS: intel,amd,freedreno
LLVM_VERSION: "8"
EXTRA_OPTION: >
-D vulkan-overlay-layer=true
# While the main point of this build is testing the i386 cross build,
# we also use this one to test some other options that are exclusive
# with meson-main's choices (classic swrast and osmesa)
meson-i386:
extends: .meson-cross
variables:
CROSS: i386
VULKAN_DRIVERS: intel
DRI_DRIVERS: "swrast"
GALLIUM_DRIVERS: "iris"
EXTRA_OPTION: >
-D vulkan-overlay-layer=true
-D llvm=false
-D osmesa=classic
meson-mingw32-x86_64:
extends: .meson-build
variables:
UNWIND: "false"
DRI_DRIVERS: ""
GALLIUM_DRIVERS: "swrast"
EXTRA_OPTION: >
-Dllvm=false
-Dosmesa=gallium
--cross-file=.gitlab-ci/x86_64-w64-mingw32
scons:
extends: .scons-build
variables:
SCONS_TARGET: "llvm=1"
SCONS_CHECK_COMMAND: "scons llvm=1 force_scons=1 check"
script:
- SCONS_TARGET="" SCONS_CHECK_COMMAND="scons check force_scons=1" .gitlab-ci/scons-build.sh
- LLVM_VERSION=6.0 .gitlab-ci/scons-build.sh
- LLVM_VERSION=7 .gitlab-ci/scons-build.sh
- LLVM_VERSION=8 .gitlab-ci/scons-build.sh
scons-old-llvm:
extends:
- scons
- .use-debian-9:amd64
script:
- LLVM_VERSION=3.9 .gitlab-ci/scons-build.sh
- LLVM_VERSION=4.0 .gitlab-ci/scons-build.sh
- LLVM_VERSION=5.0 .gitlab-ci/scons-build.sh
.test:
extends: .ci-run-policy
stage: test
variables:
GIT_STRATEGY: none # testing doesn't build anything from source
.deqp-test:
extends:
- .test
- .use-debian-10:amd64
variables:
DEQP_SKIPS: deqp-default-skips.txt
script:
# Note: Build dir (and thus install) may be dirty due to GIT_STRATEGY
- rm -rf install
- tar -xf artifacts/install.tar
- ./artifacts/deqp-runner.sh
artifacts:
when: on_failure
reports:
junit: check-*.xml
name: "$CI_JOB_NAME-$CI_COMMIT_REF_NAME"
paths:
- results/
dependencies:
- meson-main
needs:
- meson-main
- debian-10:amd64
test-llvmpipe-gles2:
parallel: 4
variables:
DEQP_VER: gles2
DEQP_EXPECTED_FAILS: deqp-llvmpipe-fails.txt
LIBGL_ALWAYS_SOFTWARE: "true"
DEQP_RENDERER_MATCH: "llvmpipe"
extends: .deqp-test
test-softpipe-gles2:
extends: test-llvmpipe-gles2
variables:
DEQP_EXPECTED_FAILS: deqp-softpipe-fails.txt
DEQP_RENDERER_MATCH: "softpipe"
GALLIUM_DRIVER: "softpipe"
# The GLES2 CTS run takes about 8 minutes of CPU time, while GLES3 is
# 25 minutes. Until we can get its runtime down, just do a partial
# (every 10 tests) run.
test-softpipe-gles3-limited:
variables:
DEQP_VER: gles3
DEQP_EXPECTED_FAILS: deqp-softpipe-fails.txt
LIBGL_ALWAYS_SOFTWARE: "true"
DEQP_RENDERER_MATCH: "softpipe"
GALLIUM_DRIVER: "softpipe"
CI_NODE_INDEX: 1
CI_NODE_TOTAL: 10
extends: .deqp-test
arm64_a630_gles2:
extends: .deqp-test
image: $DEBIAN_ARM64_IMAGE
variables:
DEQP_VER: gles2
DEQP_RENDERER_MATCH: "FD630"
DEQP_EXPECTED_FAILS: deqp-freedreno-a630-fails.txt
DEQP_SKIPS: deqp-freedreno-a630-skips.txt
NIR_VALIDATE: 0
tags:
- mesa-cheza
dependencies:
- meson-arm64
needs:
- meson-arm64
- debian-10:arm64
arm64_a630_gles31:
extends: arm64_a630_gles2
parallel: 4
variables:
DEQP_VER: gles31
arm64_a630_gles3:
parallel: 6
extends: arm64_a630_gles2
variables:
DEQP_VER: gles3
arm64_a306_gles2:
parallel: 4
extends: arm64_a630_gles2
variables:
DEQP_EXPECTED_FAILS: deqp-freedreno-a307-fails.txt
DEQP_SKIPS: deqp-default-skips.txt
DEQP_RENDERER_MATCH: "FD307"
tags:
- db410c

View File

@@ -1,33 +0,0 @@
[flake8]
exclude = .venv*,
# PEP 8 Style Guide limits line length to 79 characters
max-line-length = 159
ignore =
# continuation line under-indented for hanging indent
E121
# continuation line over-indented for hanging indent
E126,
# continuation line under-indented for visual indent
E128,
# whitespace before ':'
E203,
# missing whitespace around arithmetic operator
E226,
# missing whitespace after ','
E231,
# expected 2 blank lines, found 1
E302,
# too many blank lines
E303,
# imported but unused
F401,
# f-string is missing placeholders
F541,
# local variable assigned to but never used
F841,
# line break before binary operator
W503,
# line break after binary operator
W504,

122
.gitlab-ci/README.md Normal file
View File

@@ -0,0 +1,122 @@
## Mesa testing using gitlab-runner
The goal of the "test" stage of the .gitlab-ci.yml is to do pre-merge
testing of Mesa drivers on various platforms, so that we can ensure no
regressions are merged, as long as developers are merging code using
the "Merge when pipeline completes" button.
This document only covers the CI from .gitlab-ci.yml and this
directory. For other CI systems, see Intel's [Mesa
CI](https://gitlab.freedesktop.org/Mesa_CI) or panfrost's LAVA-based
CI (`src/gallium/drivers/panfrost/ci/`)
### Software architecture
For freedreno and llvmpipe CI, we're using gitlab-runner on the test
devices (DUTs), cached docker containers with VK-GL-CTS, and the
normal shared x86_64 runners to build the Mesa drivers to be run
inside of those containers on the DUTs.
The docker containers are rebuilt from the debian-install.sh script
when DEBIAN\_TAG is changed in .gitlab-ci.yml, and
debian-test-install.sh when DEBIAN\_ARM64\_TAG is changed in
.gitlab-ci.yml. The resulting images are around 500MB, and are
expected to change approximately weekly (though an individual
developer working on them may produce many more images while trying to
come up with a working MR!).
gitlab-runner is a client that polls gitlab.freedesktop.org for
available jobs, with no inbound networking requirements. Jobs can
have tags, so we can have DUT-specific jobs that only run on runners
with that tag marked in the gitlab UI.
Since dEQP takes a long time to run, we mark the job as "parallel" at
some level, which spawns multiple jobs from one definition, and then
deqp-runner.sh takes the corresponding fraction of the test list for
that job.
To reduce dEQP runtime (or avoid tests with unreliable results), a
deqp-runner.sh invocation can provide a list of tests to skip. If
your driver is not yet conformant, you can pass a list of expected
failures, and the job will only fail on tests that aren't listed (look
at the job's log for which specific tests failed).
### DUT requirements
#### DUTs must have a stable kernel and GPU reset.
If the system goes down during a test run, that job will eventually
time out and fail (default 1 hour). However, if the kernel can't
reliably reset the GPU on failure, bugs in one MR may leak into
spurious failures in another MR. This would be an unacceptable impact
on Mesa developers working on other drivers.
#### DUTs must be able to run docker
The Mesa gitlab-runner based test architecture is built around docker,
so that we can cache the debian package installation and CTS build
step across multiple test runs. Since the images are large and change
approximately weekly, the DUTs also need to be running some script to
prune stale docker images periodically in order to not run out of disk
space as we rev those containers (perhaps [this
script](https://gitlab.com/gitlab-org/gitlab-runner/issues/2980#note_169233611)).
Note that docker doesn't allow containers to be stored on NFS, and
doesn't allow multiple docker daemons to interact with the same
network block device, so you will probably need some sort of physical
storage on your DUTs.
#### DUTs must be public
By including your device in .gitlab-ci.yml, you're effectively letting
anyone on the internet run code on your device. docker containers may
provide some limited protection, but how much you trust that and what
you do to mitigate hostile access is up to you.
#### DUTs must expose the dri device nodes to the containers.
Obviously, to get access to the HW, we need to pass the render node
through. This is done by adding `devices = ["/dev/dri"]` to the
`runners.docker` section of /etc/gitlab-runner/config.toml.
### HW CI farm expectations
To make sure that testing of one vendor's drivers doesn't block
unrelated work by other vendors, we require that a given driver's test
farm produces a spurious failure no more than once a week. If every
driver had CI and failed once a week, we would be seeing someone's
code getting blocked on a spurious failure daily, which is an
unacceptable cost to the project.
Additionally, the test farm needs to be able to provide a short enough
turnaround time that people can regularly use the "Merge when pipeline
succeeds" button successfully (until we get
[marge-bot](https://github.com/smarkets/marge-bot) in place on
freedesktop.org). As a result, we require that the test farm be able
to handle a whole pipeline's worth of jobs in less than 5 minutes (to
compare, the build stage is about 10 minutes, if you could get all
your jobs scheduled on the shared runners in time.).
If a test farm is short the HW to provide these guarantees, consider
dropping tests to reduce runtime.
`VK-GL-CTS/scripts/log/bottleneck_report.py` can help you find what
tests were slow in a `results.qpa` file. Or, you can have a job with
no `parallel` field set and:
```
variables:
CI_NODE_INDEX: 1
CI_NODE_TOTAL: 10
```
to just run 1/10th of the test list.
If a HW CI farm goes offline (network dies and all CI pipelines end up
stalled) or its runners are consistenly spuriously failing (disk
full?), and the maintainer is not immediately available to fix the
issue, please push through an MR disabling that farm's jobs by adding
'.' to the front of the jobs names until the maintainer can bring
things back up. If this happens, the farm maintainer should provide a
report to mesa-dev@lists.freedesktop.org after the fact explaining
what happened and what the mitigation plan is for that failure next
time.

View File

@@ -1,115 +0,0 @@
# Note: skips lists for CI are just a list of lines that, when
# non-zero-length and not starting with '#', will regex match to
# delete lines from the test list. Be careful.
# This test checks the driver's reported conformance version against the
# version of the CTS we're running. This check fails every few months
# and everyone has to go and bump the number in every driver.
# Running this check only makes sense while preparing a conformance
# submission, so skip it in the regular CI.
dEQP-VK.api.driver_properties.conformance_version
# Exclude this test which might fail when a new extension is implemented.
dEQP-VK.info.device_extensions
# These are tremendously slow (pushing toward a minute), and aren't
# reliable to be run in parallel with other tests due to CPU-side timing.
dEQP-GLES[0-9]*.functional.flush_finish.*
# piglit: WGL is Windows-only
wgl@.*
# These are sensitive to CPU timing, and would need to be run in isolation
# on the system rather than in parallel with other tests.
glx@glx_arb_sync_control@timing.*
# This test is not built with waffle, while we do build tests with waffle
spec@!opengl 1.1@windowoverlap
# These tests all read from the front buffer after a swap. Given that we
# run piglit tests in parallel in Mesa CI, and don't have a compositor
# running, the frontbuffer reads may end up with undefined results from
# windows overlapping us.
#
# Piglit does mark these tests as not to be run in parallel, but deqp-runner
# doesn't respect that. We need to extend deqp-runner to allow some tests to be
# marked as single-threaded and run after the rayon loop if we want to support
# them.
#
# Note that "glx-" tests don't appear in x11-skips.txt because they can be
# run even if PIGLIT_PLATFORM=gbm (for example)
glx@glx-copy-sub-buffer.*
# A majority of the tests introduced in CTS 1.3.7.0 are experiencing failures and flakes.
# Disable these tests until someone with a more deeper understanding of EGL examines them.
#
# Note: on sc8280xp/a690 I get identical results (same passes and fails)
# between freedreno, zink, and llvmpipe, so I believe this is either a
# deqp bug or egl/wayland bug, rather than driver issue.
#
# With llvmpipe, the failing tests have the error message:
#
# "Illegal sampler view creation without bind flag"
#
# which might be a hint. (But some passing tests also have the same
# error message.)
#
# more context from David Heidelberg on IRC: the deqp commit where these
# started failing is: https://github.com/KhronosGroup/VK-GL-CTS/commit/79b25659bcbced0cfc2c3fe318951c585f682abe
# prior to that they were skipping.
wayland-dEQP-EGL.functional.color_clears.single_context.gles1.other
wayland-dEQP-EGL.functional.color_clears.single_context.gles2.other
wayland-dEQP-EGL.functional.color_clears.single_context.gles3.other
wayland-dEQP-EGL.functional.color_clears.multi_context.gles1.other
wayland-dEQP-EGL.functional.color_clears.multi_context.gles2.other
wayland-dEQP-EGL.functional.color_clears.multi_context.gles3.other
wayland-dEQP-EGL.functional.color_clears.multi_context.gles1_gles2.other
wayland-dEQP-EGL.functional.color_clears.multi_context.gles1_gles2_gles3.other
wayland-dEQP-EGL.functional.color_clears.multi_thread.gles1.other
wayland-dEQP-EGL.functional.color_clears.multi_thread.gles2.other
wayland-dEQP-EGL.functional.color_clears.multi_thread.gles3.other
wayland-dEQP-EGL.functional.color_clears.multi_thread.gles1_gles2.other
wayland-dEQP-EGL.functional.color_clears.multi_thread.gles1_gles2_gles3.other
# Seems to be the same is as wayland-dEQP-EGL.functional.color_clears.*
wayland-dEQP-EGL.functional.render.single_context.gles2.other
wayland-dEQP-EGL.functional.render.single_context.gles3.other
wayland-dEQP-EGL.functional.render.multi_context.gles2.other
wayland-dEQP-EGL.functional.render.multi_context.gles3.other
wayland-dEQP-EGL.functional.render.multi_context.gles2_gles3.other
wayland-dEQP-EGL.functional.render.multi_thread.gles2.other
wayland-dEQP-EGL.functional.render.multi_thread.gles3.other
wayland-dEQP-EGL.functional.render.multi_thread.gles2_gles3.other
# These test the loader more than the implementation and are broken because the
# Vulkan loader in Debian is too old
dEQP-VK.api.get_device_proc_addr.non_enabled
dEQP-VK.api.version_check.unavailable_entry_points
# These tests are flaking too much recently on almost all drivers, so better skip them until the cause is identified
spec@arb_program_interface_query@arb_program_interface_query-getprogramresourceindex
spec@arb_program_interface_query@arb_program_interface_query-getprogramresourceindex@'vs_input2[1][0]' on GL_PROGRAM_INPUT
# These tests attempt to read from the front buffer after a swap. They are skipped
# on both X11 and gbm, but for different reasons:
#
# On X11: Given that we run piglit tests in parallel in Mesa CI, and don't have a
# compositor running, the frontbuffer reads may end up with undefined results from
# windows overlapping us.
# Piglit does mark these tests as not to be run in parallel, but deqp-runner
# doesn't respect that. We need to extend deqp-runner to allow some tests to be
# marked as single-threaded and run after the rayon loop if we want to support
# them.
# Other front-buffer access tests like fbo-sys-blit, fbo-sys-sub-blit, or
# fcc-front-buffer-distraction don't appear here, because the DRI3 fake-front
# handling should be holding the pixels drawn by the test even if we happen to fail
# GL's window system pixel occlusion test.
# Note that glx skips don't appear here, they're in all-skips.txt (in case someone
# sets PIGLIT_PLATFORM=gbm to mostly use gbm, but still has an X server running).
#
# On gbm: gbm does not support reading the front buffer after a swapbuffers, and
# that's intentional. Don't bother running these tests when PIGLIT_PLATFORM=gbm.
# Note that this doesn't include tests like fbo-sys-blit, which draw/read front
# but don't swap.
spec@!opengl 1.0@gl-1.0-swapbuffers-behavior
spec@!opengl 1.1@read-front

View File

@@ -1,74 +0,0 @@
#!/usr/bin/env bash
# shellcheck disable=SC2086 # we want word splitting
# shellcheck disable=SC1091 # paths only become valid at runtime
. "${SCRIPTS_DIR}/setup-test-env.sh"
ci_tag_test_time_check "ANDROID_CTS_TAG"
export PATH=/android-tools/build-tools:/android-cts/jdk/bin/:$PATH
export JAVA_HOME=/android-cts/jdk
# Wait for the appops service to show up
while [ "$($ADB shell dumpsys -l | grep appops)" = "" ] ; do sleep 1; done
SKIP_FILE="$INSTALL/${GPU_VERSION}-android-cts-skips.txt"
EXCLUDE_FILTERS=""
if [ -e "$SKIP_FILE" ]; then
EXCLUDE_FILTERS="$(grep -v -E "(^#|^[[:space:]]*$)" "$SKIP_FILE" | sed -e 's/\s*$//g' -e 's/.*/--exclude-filter "\0" /g')"
fi
INCLUDE_FILE="$INSTALL/${GPU_VERSION}-android-cts-include.txt"
if [ ! -e "$INCLUDE_FILE" ]; then
set +x
echo "ERROR: No include file (${GPU_VERSION}-android-cts-include.txt) found."
echo "This means that we are running the all available CTS modules."
echo "But the time to run it might be too long, please provide an include file instead."
exit 1
fi
INCLUDE_FILTERS="$(grep -v -E "(^#|^[[:space:]]*$)" "$INCLUDE_FILE" | sed -e 's/\s*$//g' -e 's/.*/--include-filter "\0" /g')"
if [ -n "${ANDROID_CTS_PREPARE_COMMAND:-}" ]; then
eval "$ANDROID_CTS_PREPARE_COMMAND"
fi
uncollapsed_section_switch android_cts_test "Android CTS: testing"
set +e
eval "/android-cts/tools/cts-tradefed" run commandAndExit cts-dev \
$INCLUDE_FILTERS \
$EXCLUDE_FILTERS
SUMMARY_FILE=/android-cts/results/latest/invocation_summary.txt
# Parse a line like `x/y modules completed` to check that all modules completed
COMPLETED_MODULES=$(sed -n -e '/modules completed/s/^\([0-9]\+\)\/\([0-9]\+\) .*$/\1/p' "$SUMMARY_FILE")
AVAILABLE_MODULES=$(sed -n -e '/modules completed/s/^\([0-9]\+\)\/\([0-9]\+\) .*$/\2/p' "$SUMMARY_FILE")
[ "$COMPLETED_MODULES" = "$AVAILABLE_MODULES" ]
# shellcheck disable=SC2319 # False-positive see https://github.com/koalaman/shellcheck/issues/2937#issuecomment-2660891195
MODULES_FAILED=$?
# Parse a line like `FAILED : x` to check that no tests failed
[ "$(grep "^FAILED" "$SUMMARY_FILE" | tr -d ' ' | cut -d ':' -f 2)" = "0" ]
# shellcheck disable=SC2319 # False-positive see https://github.com/koalaman/shellcheck/issues/2937#issuecomment-2660891195
TESTS_FAILED=$?
[ "$MODULES_FAILED" = "0" ] && [ "$TESTS_FAILED" = "0" ]
# shellcheck disable=SC2034 # EXIT_CODE is used by the script that sources this one
EXIT_CODE=$?
set -e
mkdir "${RESULTS_DIR}/android-cts"
cp -r "/android-cts/results/latest/" "${RESULTS_DIR}/android-cts/results"
cp -r "/android-cts/logs/latest/" "${RESULTS_DIR}/android-cts/logs"
if [ -n "${ARTIFACTS_BASE_URL:-}" ]; then
echo "============================================"
echo "Review the Android CTS test results at: ${ARTIFACTS_BASE_URL}/results/android-cts/results/test_result.html"
fi
section_end android_cts_test

View File

@@ -1,110 +0,0 @@
#!/usr/bin/env bash
# shellcheck disable=SC2086 # we want word splitting
# shellcheck disable=SC1091 # paths only become valid at runtime
. "${SCRIPTS_DIR}/setup-test-env.sh"
# deqp
$ADB shell mkdir -p /data/deqp
$ADB push /deqp-gles/modules/egl/deqp-egl-android /data/deqp
$ADB push /deqp-gles/mustpass/egl-main.txt.zst /data/deqp
$ADB push /deqp-gles/modules/gles2/deqp-gles2 /data/deqp
$ADB push /deqp-gles/mustpass/gles2-main.txt.zst /data/deqp
$ADB push /deqp-vk/external/vulkancts/modules/vulkan/* /data/deqp
$ADB push /deqp-vk/mustpass/vk-main.txt.zst /data/deqp
$ADB push /deqp-tools/* /data/deqp
$ADB push /deqp-runner/deqp-runner /data/deqp
$ADB push "$INSTALL/all-skips.txt" /data/deqp
$ADB push "$INSTALL/android-skips.txt" /data/deqp
$ADB push "$INSTALL/angle-skips.txt" /data/deqp
if [ -e "$INSTALL/$GPU_VERSION-flakes.txt" ]; then
$ADB push "$INSTALL/$GPU_VERSION-flakes.txt" /data/deqp
fi
if [ -e "$INSTALL/$GPU_VERSION-fails.txt" ]; then
$ADB push "$INSTALL/$GPU_VERSION-fails.txt" /data/deqp
fi
if [ -e "$INSTALL/$GPU_VERSION-skips.txt" ]; then
$ADB push "$INSTALL/$GPU_VERSION-skips.txt" /data/deqp
fi
$ADB push "$INSTALL/deqp-$DEQP_SUITE.toml" /data/deqp
BASELINE=""
if [ -e "$INSTALL/$GPU_VERSION-fails.txt" ]; then
BASELINE="--baseline /data/deqp/$GPU_VERSION-fails.txt"
fi
# Default to an empty known flakes file if it doesn't exist.
$ADB shell "touch /data/deqp/$GPU_VERSION-flakes.txt"
DEQP_SKIPS=""
if [ -e "$INSTALL/$GPU_VERSION-skips.txt" ]; then
DEQP_SKIPS="$DEQP_SKIPS /data/deqp/$GPU_VERSION-skips.txt"
fi
if [ -n "${ANGLE_TAG:-}" ]; then
DEQP_SKIPS="$DEQP_SKIPS /data/deqp/angle-skips.txt"
fi
AOSP_RESULTS=/data/deqp/results
uncollapsed_section_switch cuttlefish_test "cuttlefish: testing"
# Print the detailed version with the list of backports and local patches
{ set +x; } 2>/dev/null
for api in vk-main vk gl gles; do
deqp_version_log=/deqp-$api/deqp-$api-version
if [ -r "$deqp_version_log" ]; then
cat "$deqp_version_log"
fi
done
set -x
set +e
$ADB shell "mkdir ${AOSP_RESULTS}; cd ${AOSP_RESULTS}/..; \
XDG_CACHE_HOME=/data/local/tmp \
./deqp-runner \
suite \
--suite /data/deqp/deqp-$DEQP_SUITE.toml \
--output $AOSP_RESULTS \
--skips /data/deqp/all-skips.txt $DEQP_SKIPS \
--flakes /data/deqp/$GPU_VERSION-flakes.txt \
--testlog-to-xml /data/deqp/testlog-to-xml \
--shader-cache-dir /data/local/tmp \
--fraction-start ${CI_NODE_INDEX:-1} \
--fraction $(( CI_NODE_TOTAL * ${DEQP_FRACTION:-1})) \
--jobs ${FDO_CI_CONCURRENT:-4} \
$BASELINE \
${DEQP_RUNNER_MAX_FAILS:+--max-fails \"$DEQP_RUNNER_MAX_FAILS\"} \
"
# shellcheck disable=SC2034 # EXIT_CODE is used by the script that sources this one
EXIT_CODE=$?
set -e
section_switch cuttlefish_results "cuttlefish: gathering the results"
$ADB pull "$AOSP_RESULTS/." "$RESULTS_DIR"
# Remove all but the first 50 individual XML files uploaded as artifacts, to
# save fd.o space when you break everything.
find $RESULTS_DIR -name \*.xml | \
sort -n |
sed -n '1,+49!p' | \
xargs rm -f
# If any QPA XMLs are there, then include the XSL/CSS in our artifacts.
find $RESULTS_DIR -name \*.xml \
-exec cp /deqp-tools/testlog.css /deqp-tools/testlog.xsl "$RESULTS_DIR/" ";" \
-quit
$ADB shell "cd ${AOSP_RESULTS}/..; \
./deqp-runner junit \
--testsuite dEQP \
--results $AOSP_RESULTS/failures.csv \
--output $AOSP_RESULTS/junit.xml \
--limit 50 \
--template \"See $ARTIFACTS_BASE_URL/results/{{testcase}}.xml\""
$ADB pull "$AOSP_RESULTS/junit.xml" "$RESULTS_DIR"
section_end cuttlefish_results

View File

@@ -1,150 +0,0 @@
#!/usr/bin/env bash
# shellcheck disable=SC2086 # we want word splitting
# shellcheck disable=SC1091 # paths only become valid at runtime
set -uex
# Set default ADB command if not set already
: "${ADB:=adb}"
$ADB wait-for-device root
sleep 1
# overlay
REMOUNT_PATHS="/vendor"
if [ "$ANDROID_VERSION" -ge 15 ]; then
REMOUNT_PATHS="$REMOUNT_PATHS /system"
fi
OV_TMPFS="/data/overlay-remount"
$ADB shell mkdir -p "$OV_TMPFS"
$ADB shell mount -t tmpfs none "$OV_TMPFS"
for path in $REMOUNT_PATHS; do
$ADB shell mkdir -p "${OV_TMPFS}${path}-upper"
$ADB shell mkdir -p "${OV_TMPFS}${path}-work"
opts="lowerdir=${path},upperdir=${OV_TMPFS}${path}-upper,workdir=${OV_TMPFS}${path}-work"
$ADB shell mount -t overlay -o "$opts" none ${path}
done
$ADB shell setenforce 0
$ADB push /android-tools/eglinfo /data
$ADB push /android-tools/vulkaninfo /data
get_gles_runtime_renderer() {
while [ "$($ADB shell XDG_CACHE_HOME=/data/local/tmp /data/eglinfo | grep 'OpenGL ES profile renderer':)" = "" ] ; do sleep 1; done
$ADB shell XDG_CACHE_HOME=/data/local/tmp /data/eglinfo | grep 'OpenGL ES profile renderer' | head -1
}
get_gles_runtime_version() {
while [ "$($ADB shell XDG_CACHE_HOME=/data/local/tmp /data/eglinfo | grep 'OpenGL ES profile version:')" = "" ] ; do sleep 1; done
$ADB shell XDG_CACHE_HOME=/data/local/tmp /data/eglinfo | grep 'OpenGL ES profile version:' | head -1
}
get_vk_runtime_device_name() {
$ADB shell XDG_CACHE_HOME=/data/local/tmp /data/vulkaninfo | grep deviceName | head -1
}
get_vk_runtime_version() {
$ADB shell XDG_CACHE_HOME=/data/local/tmp /data/vulkaninfo | grep driverInfo | head -1
}
# Check what GLES & VK implementation is used before uploading the new libraries
get_gles_runtime_renderer
get_gles_runtime_version
get_vk_runtime_device_name
get_vk_runtime_version
# replace libraries
$ADB shell rm -f /vendor/lib64/libgallium_dri.so*
$ADB shell rm -f /vendor/lib64/egl/libEGL_mesa.so*
$ADB shell rm -f /vendor/lib64/egl/libGLESv1_CM_mesa.so*
$ADB shell rm -f /vendor/lib64/egl/libGLESv2_mesa.so*
$ADB push "$INSTALL/lib/libgallium_dri.so" /vendor/lib64/libgallium_dri.so
$ADB push "$INSTALL/lib/libEGL.so" /vendor/lib64/egl/libEGL_mesa.so
$ADB push "$INSTALL/lib/libGLESv1_CM.so" /vendor/lib64/egl/libGLESv1_CM_mesa.so
$ADB push "$INSTALL/lib/libGLESv2.so" /vendor/lib64/egl/libGLESv2_mesa.so
$ADB shell rm -f /vendor/lib64/hw/vulkan.lvp.so*
$ADB shell rm -f /vendor/lib64/hw/vulkan.virtio.so*
$ADB shell rm -f /vendor/lib64/hw/vulkan.intel.so*
$ADB push "$INSTALL/lib/libvulkan_lvp.so" /vendor/lib64/hw/vulkan.lvp.so
$ADB push "$INSTALL/lib/libvulkan_virtio.so" /vendor/lib64/hw/vulkan.virtio.so
$ADB push "$INSTALL/lib/libvulkan_intel.so" /vendor/lib64/hw/vulkan.intel.so
$ADB shell rm -f /vendor/lib64/egl/libEGL_emulation.so*
$ADB shell rm -f /vendor/lib64/egl/libGLESv1_CM_emulation.so*
$ADB shell rm -f /vendor/lib64/egl/libGLESv2_emulation.so*
if [ -n "${ANGLE_TAG:-}" ]; then
ANGLE_DEST_PATH=/vendor/lib64/egl
if [ "$ANDROID_VERSION" -ge 15 ]; then
ANGLE_DEST_PATH=/system/lib64
fi
$ADB shell rm -f "$ANGLE_DEST_PATH/libEGL_angle.so"*
$ADB shell rm -f "$ANGLE_DEST_PATH/libGLESv1_CM_angle.so"*
$ADB shell rm -f "$ANGLE_DEST_PATH/libGLESv2_angle.so"*
$ADB push /angle/libEGL_angle.so "$ANGLE_DEST_PATH/libEGL_angle.so"
$ADB push /angle/libGLESv1_CM_angle.so "$ANGLE_DEST_PATH/libGLESv1_CM_angle.so"
$ADB push /angle/libGLESv2_angle.so "$ANGLE_DEST_PATH/libGLESv2_angle.so"
fi
# Check what GLES & VK implementation is used after uploading the new libraries
MESA_BUILD_VERSION=$(cat "$INSTALL/VERSION")
get_gles_runtime_renderer
GLES_RUNTIME_VERSION="$(get_gles_runtime_version)"
get_vk_runtime_device_name
VK_RUNTIME_VERSION="$(get_vk_runtime_version)"
if [ -n "${ANGLE_TAG:-}" ]; then
# Note: we are injecting the ANGLE libs too, so we need to check if the
# new ANGLE libs are being used.
ANGLE_HASH=$(head -c 12 /angle/version)
if ! printf "%s" "$GLES_RUNTIME_VERSION" | grep --quiet "${ANGLE_HASH}"; then
echo "Fatal: Android is loading a wrong version of the ANGLE libs: ${ANGLE_HASH}" 1>&2
exit 1
fi
fi
if ! printf "%s" "$VK_RUNTIME_VERSION" | grep -Fq -- "${MESA_BUILD_VERSION}"; then
echo "Fatal: Android is loading a wrong version of the Mesa3D Vulkan libs: ${VK_RUNTIME_VERSION}" 1>&2
exit 1
fi
get_surfaceflinger_pid() {
while [ "$($ADB shell dumpsys -l | grep 'SurfaceFlinger$')" = "" ] ; do sleep 1; done
$ADB shell ps -A | grep -i surfaceflinger | tr -s ' ' | cut -d ' ' -f 2
}
OLD_SF_PID=$(get_surfaceflinger_pid)
# restart Android shell, so that services use the new libraries
$ADB shell stop
$ADB shell start
# Check that SurfaceFlinger restarted, to ensure that new libraries have been picked up
NEW_SF_PID=$(get_surfaceflinger_pid)
if [ "$OLD_SF_PID" == "$NEW_SF_PID" ]; then
echo "Fatal: check that SurfaceFlinger restarted" 1>&2
exit 1
fi
if [ -n "${ANDROID_CTS_TAG:-}" ]; then
# The script sets EXIT_CODE
. "$(dirname "$0")/android-cts-runner.sh"
else
# The script sets EXIT_CODE
. "$(dirname "$0")/android-deqp-runner.sh"
fi
exit $EXIT_CODE

View File

@@ -1,11 +0,0 @@
# Skip these tests when running fractional dEQP batches, as the AHB tests are expected
# to be handled separately in a non-fractional run within the deqp-runner suite.
dEQP-VK.api.external.memory.android_hardware_buffer.*
# Skip all WSI tests: the DEQP_ANDROID_EXE build used can't create native windows, as
# only APKs support window creation on Android.
dEQP-VK.image.swapchain_mutable.*
dEQP-VK.wsi.*
# These tests cause hangs and need to be skipped for now.
dEQP-VK.synchronization*

View File

@@ -1,7 +0,0 @@
# Unlike zink which does support it, ANGLE relies on a waiver to not implement
# capturing individual array elements (see waivers.xml and gles3-waivers.txt in the CTS)
dEQP-GLES3.functional.transform_feedback.array_element.*
dEQP-GLES3.functional.transform_feedback.random.*
dEQP-GLES31.functional.program_interface_query.transform_feedback_varying.*_array_element
dEQP-GLES31.functional.program_interface_query.transform_feedback_varying.type.*.array.*
KHR-GLES31.core.program_interface_query.transform-feedback-types

46
.gitlab-ci/arm.config Normal file
View File

@@ -0,0 +1,46 @@
CONFIG_LOCALVERSION="ccu"
CONFIG_DEBUG_KERNEL=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=y
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DRM=y
CONFIG_DRM_ROCKCHIP=y
CONFIG_DRM_PANFROST=y
CONFIG_DRM_LIMA=y
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_PWM_CROS_EC=y
CONFIG_BACKLIGHT_PWM=y
CONFIG_ROCKCHIP_CDN_DP=n
CONFIG_SPI_ROCKCHIP=y
CONFIG_PWM_ROCKCHIP=y
CONFIG_PHY_ROCKCHIP_DP=y
CONFIG_DWMAC_ROCKCHIP=y
CONFIG_MFD_RK808=y
CONFIG_REGULATOR_RK808=y
CONFIG_RTC_DRV_RK808=y
CONFIG_COMMON_CLK_RK808=y
CONFIG_REGULATOR_FAN53555=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_VCTRL=y
CONFIG_KASAN=n
CONFIG_KASAN_INLINE=n
CONFIG_STACKTRACE=n
CONFIG_TMPFS=y
CONFIG_PROVE_LOCKING=n
CONFIG_DEBUG_LOCKDEP=n
CONFIG_SOFTLOCKUP_DETECTOR=n
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=n

84
.gitlab-ci/arm64.config Normal file
View File

@@ -0,0 +1,84 @@
CONFIG_LOCALVERSION="ccu"
CONFIG_DEBUG_KERNEL=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=y
CONFIG_DRM=y
CONFIG_DRM_ROCKCHIP=y
CONFIG_DRM_PANFROST=y
CONFIG_DRM_LIMA=y
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_PWM_CROS_EC=y
CONFIG_BACKLIGHT_PWM=y
CONFIG_ROCKCHIP_CDN_DP=n
CONFIG_SPI_ROCKCHIP=y
CONFIG_PWM_ROCKCHIP=y
CONFIG_PHY_ROCKCHIP_DP=y
CONFIG_DWMAC_ROCKCHIP=y
CONFIG_STMMAC_ETH=y
CONFIG_TYPEC_FUSB302=y
CONFIG_TYPEC=y
CONFIG_TYPEC_TCPM=y
CONFIG_ARCH_SUNXI=n
CONFIG_ARCH_ALPINE=n
CONFIG_ARCH_BCM2835=n
CONFIG_ARCH_BCM_IPROC=n
CONFIG_ARCH_BERLIN=n
CONFIG_ARCH_BRCMSTB=n
CONFIG_ARCH_EXYNOS=n
CONFIG_ARCH_K3=n
CONFIG_ARCH_LAYERSCAPE=n
CONFIG_ARCH_LG1K=n
CONFIG_ARCH_HISI=n
CONFIG_ARCH_MEDIATEK=n
CONFIG_ARCH_MVEBU=n
CONFIG_ARCH_QCOM=n
CONFIG_ARCH_SEATTLE=n
CONFIG_ARCH_SYNQUACER=n
CONFIG_ARCH_RENESAS=n
CONFIG_ARCH_R8A774A1=n
CONFIG_ARCH_R8A774C0=n
CONFIG_ARCH_R8A7795=n
CONFIG_ARCH_R8A7796=n
CONFIG_ARCH_R8A77965=n
CONFIG_ARCH_R8A77970=n
CONFIG_ARCH_R8A77980=n
CONFIG_ARCH_R8A77990=n
CONFIG_ARCH_R8A77995=n
CONFIG_ARCH_STRATIX10=n
CONFIG_ARCH_TEGRA=n
CONFIG_ARCH_SPRD=n
CONFIG_ARCH_THUNDER=n
CONFIG_ARCH_THUNDER2=n
CONFIG_ARCH_UNIPHIER=n
CONFIG_ARCH_VEXPRESS=n
CONFIG_ARCH_XGENE=n
CONFIG_ARCH_ZX=n
CONFIG_ARCH_ZYNQMP=n
CONFIG_ACPI=n
CONFIG_REGULATOR_FAN53555=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_VCTRL=y
CONFIG_KASAN=n
CONFIG_KASAN_INLINE=n
CONFIG_STACKTRACE=n
CONFIG_TMPFS=y
CONFIG_PROVE_LOCKING=n
CONFIG_DEBUG_LOCKDEP=n
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_DETECT_HUNG_TASK=y

View File

@@ -1,2 +0,0 @@
[*.sh]
indent_size = 2

View File

@@ -1,15 +0,0 @@
#!/bin/sh
# Init entrypoint for bare-metal devices; calls common init code.
# First stage: very basic setup to bring up network and /dev etc
/init-stage1.sh
export CURRENT_SECTION=dut_boot
# Second stage: run jobs
test $? -eq 0 && /init-stage2.sh
# Wait until the job would have timed out anyway, so we don't spew a "init
# exited" panic.
sleep 6000

View File

@@ -1,129 +0,0 @@
.baremetal-test:
extends:
- .test
# Cancel job if a newer commit is pushed to the same branch
interruptible: true
before_script:
- !reference [.download_s3, before_script]
variables:
BM_ROOTFS: /rootfs-${DEBIAN_ARCH}
artifacts:
when: always
name: "${CI_PROJECT_NAME}_${CI_JOB_NAME_SLUG}"
paths:
- results/
- serial*.txt
exclude:
- results/*.shader_cache
reports:
junit: results/junit.xml
# ARM testing of bare-metal boards attached to an x86 gitlab-runner system
.baremetal-test-arm32-gl:
extends:
- .baremetal-test
- .use-debian/baremetal_arm32_test-gl
variables:
DEBIAN_ARCH: armhf
S3_ARTIFACT_NAME: mesa-arm32-default-debugoptimized
needs:
- job: debian/baremetal_arm32_test-gl
optional: true
- job: debian-arm32
artifacts: false
- !reference [.required-for-hardware-jobs, needs]
# ARM64 testing of bare-metal boards attached to an x86 gitlab-runner system
.baremetal-test-arm64-gl:
extends:
- .baremetal-test
- .use-debian/baremetal_arm64_test-gl
variables:
DEBIAN_ARCH: arm64
S3_ARTIFACT_NAME: mesa-arm64-default-debugoptimized
needs:
- job: debian/baremetal_arm64_test-gl
optional: true
- job: debian-arm64
artifacts: false
- !reference [.required-for-hardware-jobs, needs]
# ARM64 testing of bare-metal boards attached to an x86 gitlab-runner system
.baremetal-test-arm64-vk:
extends:
- .baremetal-test
- .use-debian/baremetal_arm64_test-vk
variables:
DEBIAN_ARCH: arm64
S3_ARTIFACT_NAME: mesa-arm64-default-debugoptimized
needs:
- job: debian/baremetal_arm64_test-vk
optional: true
- job: debian-arm64
artifacts: false
- !reference [.required-for-hardware-jobs, needs]
# ARM32/64 testing of bare-metal boards attached to an x86 gitlab-runner system, using an asan mesa build
.baremetal-arm32-asan-test-gl:
variables:
S3_ARTIFACT_NAME: mesa-arm32-asan-debugoptimized
DEQP_FORCE_ASAN: 1
needs:
- job: debian/baremetal_arm32_test-gl
optional: true
- job: debian-arm32-asan
artifacts: false
- !reference [.required-for-hardware-jobs, needs]
.baremetal-arm64-asan-test-gl:
variables:
S3_ARTIFACT_NAME: mesa-arm64-asan-debugoptimized
DEQP_FORCE_ASAN: 1
needs:
- job: debian/baremetal_arm64_test-gl
optional: true
- job: debian-arm64-asan
artifacts: false
- !reference [.required-for-hardware-jobs, needs]
.baremetal-arm64-asan-test-vk:
variables:
S3_ARTIFACT_NAME: mesa-arm64-asan-debugoptimized
DEQP_FORCE_ASAN: 1
needs:
- job: debian/baremetal_arm64_test-vk
optional: true
- job: debian-arm64-asan
artifacts: false
- !reference [.required-for-hardware-jobs, needs]
.baremetal-arm64-ubsan-test-gl:
extends:
- .baremetal-test
- .use-debian/baremetal_arm64_test-gl
variables:
S3_ARTIFACT_NAME: mesa-arm64-ubsan-debugoptimized
needs:
- job: debian/baremetal_arm64_test-gl
optional: true
- job: debian-arm64-ubsan
artifacts: false
- !reference [.required-for-hardware-jobs, needs]
.baremetal-arm64-ubsan-test-vk:
extends:
- .baremetal-test
- .use-debian/baremetal_arm64_test-vk
variables:
S3_ARTIFACT_NAME: mesa-arm64-ubsan-debugoptimized
needs:
- job: debian/baremetal_arm64_test-vk
optional: true
- job: debian-arm64-ubsan
artifacts: false
- !reference [.required-for-hardware-jobs, needs]
.baremetal-deqp-test:
variables:
HWCI_TEST_SCRIPT: "/install/deqp-runner.sh"
FDO_CI_CONCURRENT: 0 # Default to number of CPUs

View File

@@ -1,16 +0,0 @@
#!/bin/bash
if [ -z "$BM_POE_INTERFACE" ]; then
echo "Must supply the PoE Interface to power up"
exit 1
fi
if [ -z "$BM_POE_ADDRESS" ]; then
echo "Must supply the PoE Switch host"
exit 1
fi
SNMP_KEY="SNMPv2-SMI::mib-2.105.1.1.1.3.1.$((${BM_POE_BASE:-0} + BM_POE_INTERFACE))"
SNMP_OFF="i 2"
flock /var/run/poe.lock -c "snmpset -v2c -r 3 -t 30 -cmesaci $BM_POE_ADDRESS $SNMP_KEY $SNMP_OFF"

View File

@@ -1,19 +0,0 @@
#!/bin/bash
if [ -z "$BM_POE_INTERFACE" ]; then
echo "Must supply the PoE Interface to power up"
exit 1
fi
if [ -z "$BM_POE_ADDRESS" ]; then
echo "Must supply the PoE Switch host"
exit 1
fi
SNMP_KEY="SNMPv2-SMI::mib-2.105.1.1.1.3.1.$((${BM_POE_BASE:-0} + BM_POE_INTERFACE))"
SNMP_ON="i 1"
SNMP_OFF="i 2"
flock /var/run/poe.lock -c "snmpset -v2c -r 3 -t 30 -cmesaci $BM_POE_ADDRESS $SNMP_KEY $SNMP_OFF"
sleep 3s
flock /var/run/poe.lock -c "snmpset -v2c -r 3 -t 30 -cmesaci $BM_POE_ADDRESS $SNMP_KEY $SNMP_ON"

View File

@@ -1,191 +0,0 @@
#!/bin/bash
# shellcheck disable=SC1091
# shellcheck disable=SC2034
# shellcheck disable=SC2059
# shellcheck disable=SC2086 # we want word splitting
. "$SCRIPTS_DIR"/setup-test-env.sh
# Boot script for devices attached to a PoE switch, using NFS for the root
# filesystem.
# We're run from the root of the repo, make a helper var for our paths
BM=$CI_PROJECT_DIR/install/bare-metal
CI_COMMON=$CI_PROJECT_DIR/install/common
CI_INSTALL=$CI_PROJECT_DIR/install
# Runner config checks
if [ -z "$BM_SERIAL" ]; then
echo "Must set BM_SERIAL in your gitlab-runner config.toml [[runners]] environment"
echo "This is the serial port to listen the device."
exit 1
fi
if [ -z "$BM_POE_ADDRESS" ]; then
echo "Must set BM_POE_ADDRESS in your gitlab-runner config.toml [[runners]] environment"
echo "This is the PoE switch address to connect for powering up/down devices."
exit 1
fi
if [ -z "$BM_POE_INTERFACE" ]; then
echo "Must set BM_POE_INTERFACE in your gitlab-runner config.toml [[runners]] environment"
echo "This is the PoE switch interface where the device is connected."
exit 1
fi
if [ -z "$BM_POWERUP" ]; then
echo "Must set BM_POWERUP in your gitlab-runner config.toml [[runners]] environment"
echo "This is a shell script that should power up the device and begin its boot sequence."
exit 1
fi
if [ -z "$BM_POWERDOWN" ]; then
echo "Must set BM_POWERDOWN in your gitlab-runner config.toml [[runners]] environment"
echo "This is a shell script that should power off the device."
exit 1
fi
if [ ! -d /nfs ]; then
echo "NFS rootfs directory needs to be mounted at /nfs by the gitlab runner"
exit 1
fi
if [ ! -d /tftp ]; then
echo "TFTP directory for this board needs to be mounted at /tftp by the gitlab runner"
exit 1
fi
# job config checks
if [ -z "$BM_ROOTFS" ]; then
echo "Must set BM_ROOTFS to your board's rootfs directory in the job's variables"
exit 1
fi
if [ -z "$BM_BOOTFS" ] && { [ -z "$BM_KERNEL" ] || [ -z "$BM_DTB" ]; } ; then
echo "Must set /boot files for the TFTP boot in the job's variables or set kernel and dtb"
exit 1
fi
if [ -z "$BM_CMDLINE" ]; then
echo "Must set BM_CMDLINE to your board's kernel command line arguments"
exit 1
fi
section_start prepare_rootfs "Preparing rootfs components"
set -ex
date +'%F %T'
# Clear out any previous run's artifacts.
rm -rf results/
mkdir -p results
# Create the rootfs in the NFS directory. rm to make sure it's in a pristine
# state, since it's volume-mounted on the host.
rsync -a --delete $BM_ROOTFS/ /nfs/
date +'%F %T'
# If BM_BOOTFS is an URL, download it
if echo $BM_BOOTFS | grep -q http; then
curl -L --retry 4 -f --retry-all-errors --retry-delay 60 \
"${FDO_HTTP_CACHE_URI:-}$BM_BOOTFS" -o /tmp/bootfs.tar
BM_BOOTFS=/tmp/bootfs.tar
fi
date +'%F %T'
# If BM_BOOTFS is a file, assume it is a tarball and uncompress it
if [ -f "${BM_BOOTFS}" ]; then
mkdir -p /tmp/bootfs
tar xf $BM_BOOTFS -C /tmp/bootfs
BM_BOOTFS=/tmp/bootfs
fi
date +'%F %T'
# Install kernel modules (it could be either in /lib/modules or
# /usr/lib/modules, but we want to install in the latter)
if [ -n "${BM_BOOTFS}" ]; then
[ -d $BM_BOOTFS/usr/lib/modules ] && rsync -a $BM_BOOTFS/usr/lib/modules/ /nfs/usr/lib/modules/
[ -d $BM_BOOTFS/lib/modules ] && rsync -a $BM_BOOTFS/lib/modules/ /nfs/lib/modules/
else
echo "No modules!"
fi
date +'%F %T'
# Install kernel image + bootloader files
if [ -z "$BM_BOOTFS" ]; then
mv "${BM_KERNEL}" "${BM_DTB}.dtb" /tftp/
else # BM_BOOTFS
rsync -aL --delete $BM_BOOTFS/boot/ /tftp/
fi
date +'%F %T'
# Create the rootfs in the NFS directory
. $BM/rootfs-setup.sh /nfs
date +'%F %T'
echo "$BM_CMDLINE" > /tftp/cmdline.txt
# Add some options in config.txt, if defined
if [ -n "$BM_BOOTCONFIG" ]; then
printf "$BM_BOOTCONFIG" >> /tftp/config.txt
fi
section_end prepare_rootfs
set +e
STRUCTURED_LOG_FILE=results/job_detail.json
python3 $CI_INSTALL/custom_logger.py ${STRUCTURED_LOG_FILE} --update dut_job_type "${DEVICE_TYPE}"
python3 $CI_INSTALL/custom_logger.py ${STRUCTURED_LOG_FILE} --update farm "${FARM}"
ATTEMPTS=3
first_attempt=True
while [ $((ATTEMPTS--)) -gt 0 ]; do
section_start dut_boot "Booting hardware device ..."
python3 $CI_INSTALL/custom_logger.py ${STRUCTURED_LOG_FILE} --create-dut-job dut_name "${CI_RUNNER_DESCRIPTION}"
# Update subtime time to CI_JOB_STARTED_AT only for the first run
if [ "$first_attempt" = "True" ]; then
python3 $CI_INSTALL/custom_logger.py ${STRUCTURED_LOG_FILE} --update-dut-time submit "${CI_JOB_STARTED_AT}"
else
python3 $CI_INSTALL/custom_logger.py ${STRUCTURED_LOG_FILE} --update-dut-time submit
fi
python3 $BM/poe_run.py \
--dev="$BM_SERIAL" \
--powerup="$BM_POWERUP" \
--powerdown="$BM_POWERDOWN" \
--boot-timeout-seconds ${BOOT_PHASE_TIMEOUT_SECONDS:-300} \
--test-timeout-minutes ${TEST_PHASE_TIMEOUT_MINUTES:-$((CI_JOB_TIMEOUT/60 - ${TEST_SETUP_AND_UPLOAD_MARGIN_MINUTES:-5}))}
ret=$?
if [ $ret -eq 2 ]; then
python3 $CI_INSTALL/custom_logger.py ${STRUCTURED_LOG_FILE} --close-dut-job
first_attempt=False
error "Device failed to boot; will retry"
else
# We're no longer in dut_boot by this point
unset CURRENT_SECTION
ATTEMPTS=0
fi
done
section_start dut_cleanup "Cleaning up after job"
python3 $CI_INSTALL/custom_logger.py ${STRUCTURED_LOG_FILE} --close-dut-job
python3 $CI_INSTALL/custom_logger.py ${STRUCTURED_LOG_FILE} --close
set -e
date +'%F %T'
# Bring artifacts back from the NFS dir to the build dir where gitlab-runner
# will look for them.
cp -Rp /nfs/results/. results/
date +'%F %T'
section_end dut_cleanup
exit $ret

View File

@@ -1,133 +0,0 @@
#!/usr/bin/env python3
#
# Copyright © 2020 Igalia, S.L.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice (including the next
# paragraph) shall be included in all copies or substantial portions of the
# Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
# IN THE SOFTWARE.
import argparse
import os
import re
import sys
import threading
from custom_logger import CustomLogger
from serial_buffer import SerialBuffer
class PoERun:
def __init__(self, args, boot_timeout, test_timeout, logger):
self.powerup = args.powerup
self.powerdown = args.powerdown
self.ser = SerialBuffer(
args.dev, "results/serial-output.txt", ": ")
self.boot_timeout = boot_timeout
self.test_timeout = test_timeout
self.logger = logger
def print_error(self, message):
RED = '\033[0;31m'
NO_COLOR = '\033[0m'
print(RED + message + NO_COLOR)
self.logger.update_status_fail(message)
def logged_system(self, cmd):
print("Running '{}'".format(cmd))
return os.system(cmd)
def run(self):
if self.logged_system(self.powerup) != 0:
self.logger.update_status_fail("powerup failed")
return 1
boot_detected = False
self.logger.create_job_phase("boot")
for line in self.ser.lines(timeout=self.boot_timeout, phase="bootloader"):
if re.search("Booting Linux", line):
boot_detected = True
break
if not boot_detected:
self.print_error(
"Something wrong; couldn't detect the boot start up sequence")
return 2
self.logger.create_job_phase("test")
for line in self.ser.lines(timeout=self.test_timeout, phase="test"):
if re.search("---. end Kernel panic", line):
self.logger.update_status_fail("kernel panic")
return 1
# Binning memory problems
if re.search("binner overflow mem", line):
self.print_error("Memory overflow in the binner; GPU hang")
return 1
if re.search("nouveau 57000000.gpu: bus: MMIO read of 00000000 FAULT at 137000", line):
self.print_error("nouveau jetson boot bug, abandoning run.")
return 1
# network fail on tk1
if re.search("NETDEV WATCHDOG:.* transmit queue 0 timed out", line):
self.print_error("nouveau jetson tk1 network fail, abandoning run.")
return 1
result = re.search(r"hwci: mesa: exit_code: (\d+)", line)
if result:
exit_code = int(result.group(1))
if exit_code == 0:
self.logger.update_dut_job("status", "pass")
else:
self.logger.update_status_fail("test fail")
self.logger.update_dut_job("exit_code", exit_code)
return exit_code
self.print_error(
"Reached the end of the CPU serial log without finding a result")
return 1
def main():
parser = argparse.ArgumentParser()
parser.add_argument('--dev', type=str,
help='Serial device to monitor', required=True)
parser.add_argument('--powerup', type=str,
help='shell command for rebooting', required=True)
parser.add_argument('--powerdown', type=str,
help='shell command for powering off', required=True)
parser.add_argument(
'--boot-timeout-seconds', type=int, help='Boot phase timeout (seconds)', required=True)
parser.add_argument(
'--test-timeout-minutes', type=int, help='Test phase timeout (minutes)', required=True)
args = parser.parse_args()
logger = CustomLogger("results/job_detail.json")
logger.update_dut_time("start", None)
poe = PoERun(args, args.boot_timeout_seconds, args.test_timeout_minutes * 60, logger)
retval = poe.run()
poe.logged_system(args.powerdown)
logger.update_dut_time("end", None)
sys.exit(retval)
if __name__ == '__main__':
main()

View File

@@ -1,34 +0,0 @@
#!/usr/bin/env bash
# shellcheck disable=SC2086 # we want word splitting
rootfs_dst=$1
mkdir -p $rootfs_dst/results
# Set up the init script that brings up the system.
cp $BM/bm-init.sh $rootfs_dst/init
cp $CI_COMMON/init*.sh $rootfs_dst/
date +'%F %T'
# Make JWT token available as file in the bare-metal storage to enable access
# to MinIO
cp "${S3_JWT_FILE}" "${rootfs_dst}${S3_JWT_FILE}"
date +'%F %T'
cp "$SCRIPTS_DIR/setup-test-env.sh" "$rootfs_dst/"
set +x
# Pass through relevant env vars from the gitlab job to the baremetal init script
echo "Variables passed through:"
filter_env_vars | tee $rootfs_dst/set-job-env-vars.sh
set -x
# Add the Mesa drivers we built, and make a consistent symlink to them.
mkdir -p $rootfs_dst/$CI_PROJECT_DIR
rsync -aH --delete $CI_PROJECT_DIR/install/ $rootfs_dst/$CI_PROJECT_DIR/install/
date +'%F %T'

View File

@@ -1,186 +0,0 @@
#!/usr/bin/env python3
#
# Copyright © 2020 Google LLC
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice (including the next
# paragraph) shall be included in all copies or substantial portions of the
# Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
# IN THE SOFTWARE.
import argparse
from datetime import datetime, UTC
import queue
import serial
import threading
import time
class SerialBuffer:
def __init__(self, dev, filename, prefix, timeout=None, line_queue=None):
self.filename = filename
self.dev = dev
if dev:
self.f = open(filename, "wb+")
self.serial = serial.Serial(dev, 115200, timeout=timeout)
else:
self.f = open(filename, "rb")
self.serial = None
self.byte_queue = queue.Queue()
# allow multiple SerialBuffers to share a line queue so you can merge
# servo's CPU and EC streams into one thing to watch the boot/test
# progress on.
if line_queue:
self.line_queue = line_queue
else:
self.line_queue = queue.Queue()
self.prefix = prefix
self.timeout = timeout
self.sentinel = object()
self.closing = False
if self.dev:
self.read_thread = threading.Thread(
target=self.serial_read_thread_loop, daemon=True)
else:
self.read_thread = threading.Thread(
target=self.serial_file_read_thread_loop, daemon=True)
self.read_thread.start()
self.lines_thread = threading.Thread(
target=self.serial_lines_thread_loop, daemon=True)
self.lines_thread.start()
def close(self):
self.closing = True
if self.serial:
self.serial.cancel_read()
self.read_thread.join()
self.lines_thread.join()
if self.serial:
self.serial.close()
# Thread that just reads the bytes from the serial device to try to keep from
# buffer overflowing it. If nothing is received in 1 minute, it finalizes.
def serial_read_thread_loop(self):
greet = "Serial thread reading from %s\n" % self.dev
self.byte_queue.put(greet.encode())
while not self.closing:
try:
b = self.serial.read()
if len(b) == 0:
break
self.byte_queue.put(b)
except Exception as err:
print(self.prefix + str(err))
break
self.byte_queue.put(self.sentinel)
# Thread that just reads the bytes from the file of serial output that some
# other process is appending to.
def serial_file_read_thread_loop(self):
greet = "Serial thread reading from %s\n" % self.filename
self.byte_queue.put(greet.encode())
while not self.closing:
line = self.f.readline()
if line:
self.byte_queue.put(line)
else:
time.sleep(0.1)
self.byte_queue.put(self.sentinel)
# Thread that processes the stream of bytes to 1) log to stdout, 2) log to
# file, 3) add to the queue of lines to be read by program logic
def serial_lines_thread_loop(self):
line = bytearray()
while True:
bytes = self.byte_queue.get(block=True)
if bytes == self.sentinel:
self.read_thread.join()
self.line_queue.put(self.sentinel)
break
# Write our data to the output file if we're the ones reading from
# the serial device
if self.dev:
self.f.write(bytes)
self.f.flush()
for b in bytes:
line.append(b)
if b == b'\n'[0]:
line = line.decode(errors="replace")
ts = datetime.now(tz=UTC)
ts_str = f"{ts.hour:02}:{ts.minute:02}:{ts.second:02}.{int(ts.microsecond / 1000):03}"
print("{endc}{time}{prefix}{line}".format(
time=ts_str, prefix=self.prefix, line=line, endc='\033[0m'), flush=True, end='')
self.line_queue.put(line)
line = bytearray()
def lines(self, timeout=None, phase=None):
start_time = time.monotonic()
while True:
read_timeout = None
if timeout:
read_timeout = timeout - (time.monotonic() - start_time)
if read_timeout <= 0:
print("read timeout waiting for serial during {}".format(phase))
self.close()
break
try:
line = self.line_queue.get(timeout=read_timeout)
except queue.Empty:
print("read timeout waiting for serial during {}".format(phase))
self.close()
break
if line == self.sentinel:
print("End of serial output")
self.lines_thread.join()
break
yield line
def main():
parser = argparse.ArgumentParser()
parser.add_argument('--dev', type=str, help='Serial device')
parser.add_argument('--file', type=str,
help='Filename for serial output', required=True)
parser.add_argument('--prefix', type=str,
help='Prefix for logging serial to stdout', nargs='?')
args = parser.parse_args()
ser = SerialBuffer(args.dev, args.file, args.prefix or "")
for line in ser.lines():
# We're just using this as a logger, so eat the produced lines and drop
# them
pass
if __name__ == '__main__':
main()

View File

@@ -1 +0,0 @@
../bin/ci

View File

@@ -1,95 +0,0 @@
.meson-build-for-tests:
extends:
- .build-linux
stage: build-for-tests
script:
- &meson-build timeout --verbose ${BUILD_JOB_TIMEOUT_OVERRIDE:-$BUILD_JOB_TIMEOUT} bash --login .gitlab-ci/meson/build.sh
- .gitlab-ci/prepare-artifacts.sh
.meson-build-only:
extends:
- .meson-build-for-tests
- .build-only-delayed-rules
stage: build-only
script:
- *meson-build
# Shared between windows and Linux
.build-common:
extends: .build-rules
# Cancel job if a newer commit is pushed to the same branch
interruptible: true
variables:
# Build jobs are typically taking between 5-12 minutes, depending on how
# much they build and how many new Rust compilers we have to build twice.
# Allow 25 minutes as a reasonable margin: beyond this point, something
# has gone badly wrong, and we should try again to see if we can get
# something from it.
#
# Some jobs not in the critical path use a higher timeout, particularly
# when building with ASan or UBSan.
BUILD_JOB_TIMEOUT: 12m
RUN_MESON_TESTS: "true"
timeout: 16m
# We don't want to download any previous job's artifacts
dependencies: []
artifacts:
name: "${CI_PROJECT_NAME}_${CI_JOB_NAME_SLUG}"
when: always
paths:
- _build/meson-logs/*.txt
- _build/meson-logs/strace
- _build/.ninja_log
- artifacts
.build-run-long:
variables:
BUILD_JOB_TIMEOUT: 18m
timeout: 25m
# Just Linux
.build-linux:
extends: .build-common
variables:
C_ARGS: >
-Wno-error=deprecated-declarations
CCACHE_COMPILERCHECK: "content"
CCACHE_COMPRESS: "true"
CCACHE_DIR: /cache/mesa/ccache
# Use ccache transparently, and print stats before/after
before_script:
- !reference [default, before_script]
- |
export PATH="/usr/lib/ccache:$PATH"
export CCACHE_BASEDIR="$PWD"
if test -x /usr/bin/ccache; then
section_start ccache_before "ccache stats before build"
ccache --show-stats
section_end ccache_before
fi
after_script:
- if test -x /usr/bin/ccache; then ccache --show-stats | grep "Hits:"; fi
- !reference [default, after_script]
.build-windows:
extends:
- .build-common
- .windows-docker-tags
cache:
key: ${CI_JOB_NAME}
paths:
- subprojects/packagecache
.ci-deqp-artifacts:
artifacts:
name: "${CI_PROJECT_NAME}_${CI_JOB_NAME_SLUG}"
when: always
untracked: false
paths:
# Watch out! Artifacts are relative to the build dir.
# https://gitlab.com/gitlab-org/gitlab-ce/commit/8788fb925706cad594adf6917a6c5f6587dd1521
- artifacts
- _build/meson-logs/*.txt
- _build/meson-logs/strace
- _build/.ninja_log

View File

@@ -1,792 +0,0 @@
include:
- local: '.gitlab-ci/build/gitlab-ci-inc.yml'
# Git archive
make-git-archive:
extends:
- .fdo.ci-fairy
stage: git-archive
rules:
- !reference [.scheduled_pipeline-rules, rules]
script:
# Compactify the .git directory
- git gc --aggressive
# Download & cache the perfetto subproject as well.
- rm -rf subprojects/perfetto ; mkdir -p subprojects/perfetto && curl --fail https://android.googlesource.com/platform/external/perfetto/+archive/$(grep 'revision =' subprojects/perfetto.wrap | cut -d ' ' -f3).tar.gz | tar zxf - -C subprojects/perfetto
# compress the current folder
- tar -cvzf ../$CI_PROJECT_NAME.tar.gz .
- ci-fairy s3cp --token-file "${S3_JWT_FILE}" ../$CI_PROJECT_NAME.tar.gz https://$S3_HOST/git-cache/$CI_PROJECT_NAMESPACE/$CI_PROJECT_NAME/$CI_PROJECT_NAME.tar.gz
debian-x86_64:
extends:
- .meson-build-for-tests
- .use-debian/x86_64_build
- .build-run-long # but it really shouldn't! tracked in mesa#12544
- .ci-deqp-artifacts
variables:
UNWIND: "enabled"
DRI_LOADERS: >
-D egl=enabled
-D gbm=enabled
-D glvnd=disabled
-D glx=dri
-D platforms=x11,wayland
GALLIUM_ST: >
-D gallium-rusticl=true
-D gallium-va=enabled
GALLIUM_DRIVERS: "llvmpipe,softpipe,virgl,radeonsi,zink,iris,svga"
VULKAN_DRIVERS: "swrast,amd,intel,virtio"
BUILDTYPE: "debugoptimized"
EXTRA_OPTION: >
-D intel-elk=false
-D spirv-to-dxil=true
-D tools=drm-shim
-D valgrind=disabled
S3_ARTIFACT_NAME: mesa-x86_64-default-${BUILDTYPE}
RUN_MESON_TESTS: "false" # debian-build-x86_64 already runs these
artifacts:
reports:
junit: artifacts/ci_scripts_report.xml
debian-x86_64-asan:
extends:
- debian-x86_64
- .meson-build-for-tests
- .build-run-long
variables:
VULKAN_DRIVERS: "swrast"
GALLIUM_DRIVERS: "llvmpipe,softpipe"
C_ARGS: >
-Wno-error=stringop-truncation
-Wno-error=deprecated-declarations
EXTRA_OPTION: >
-D b_sanitize=address
-D gallium-va=false
-D gallium-rusticl=false
-D mesa-clc=system
-D tools=dlclose-skip
-D valgrind=disabled
S3_ARTIFACT_NAME: mesa-x86_64-asan-${BUILDTYPE}
ARTIFACTS_DEBUG_SYMBOLS: 1
RUN_MESON_TESTS: "false" # just too slow
# Do a host build for mesa-clc (asan complains not being loaded as
# the first library)
HOST_BUILD_OPTIONS: >
-D build-tests=false
-D enable-glcpp-tests=false
-D gallium-rusticl=false
-D gallium-drivers=
-D glx=disabled
-D install-mesa-clc=true
-D mesa-clc=enabled
-D platforms=
-D video-codecs=
-D vulkan-drivers=
debian-x86_64-msan:
# https://github.com/google/sanitizers/wiki/MemorySanitizerLibcxxHowTo
# msan cannot fully work until it's used together with msan libc
extends:
- debian-clang
- .meson-build-only
- .build-run-long
variables:
# l_undef is incompatible with msan
EXTRA_OPTION:
-D b_sanitize=memory
-D b_lundef=false
-D mesa-clc=system
-D precomp-compiler=system
S3_ARTIFACT_NAME: ""
ARTIFACTS_DEBUG_SYMBOLS: 1
# Don't run all the tests yet:
# GLSL has some issues in sexpression reading.
# gtest has issues in its test initialization.
MESON_TEST_ARGS: "--suite glcpp --suite format"
GALLIUM_DRIVERS: "freedreno,iris,nouveau,r300,r600,llvmpipe,softpipe,svga,v3d,vc4,virgl,etnaviv,panfrost,lima,zink,radeonsi,tegra,d3d12,crocus"
VULKAN_DRIVERS: intel,amd,broadcom,virtio
C_ARGS: >
-Wno-error=constant-conversion
-Wno-error=enum-conversion
-Wno-error=initializer-overrides
-Wno-error=sometimes-uninitialized
-Werror=misleading-indentation
-Wno-error=deprecated-declarations
CPP_ARGS: >
-Wno-error=c99-designator
-Wno-error=overloaded-virtual
-Wno-error=tautological-constant-out-of-range-compare
-Wno-error=unused-private-field
-Wno-error=vla-cxx-extension
-Wno-error=deprecated-declarations
RUN_MESON_TESTS: "false" # just too slow
# Do a host build for mesa-clc and precomp-compiler (msan complains about uninitialized
# values in the LLVM libs)
HOST_BUILD_OPTIONS: >
-D build-tests=false
-D enable-glcpp-tests=false
-D gallium-drivers=
-D vulkan-drivers=
-D video-codecs=
-D glx=disabled
-D platforms=
-D mesa-clc=enabled
-D install-mesa-clc=true
-D precomp-compiler=enabled
-D install-precomp-compiler=true
-D tools=panfrost
debian-x86_64-ubsan:
extends:
- debian-x86_64
- .meson-build-for-tests
- .build-run-long
variables:
C_ARGS: >
-Wno-error=stringop-overflow
-Wno-error=stringop-truncation
-Wno-error=deprecated-declarations
CPP_ARGS: >
-Wno-error=array-bounds
GALLIUM_DRIVERS: "llvmpipe,softpipe"
VULKAN_DRIVERS: "swrast"
EXTRA_OPTION: >
-D b_sanitize=undefined
-D mesa-clc=system
-D gallium-rusticl=false
-D gallium-va=false
S3_ARTIFACT_NAME: ""
ARTIFACTS_DEBUG_SYMBOLS: 1
RUN_MESON_TESTS: "false" # just too slow
HOST_BUILD_OPTIONS: >
-D build-tests=false
-D enable-glcpp-tests=false
-D gallium-rusticl=false
-D gallium-drivers=
-D vulkan-drivers=
-D video-codecs=
-D glx=disabled
-D platforms=
-D mesa-clc=enabled
-D install-mesa-clc=true
debian-build-x86_64:
extends:
- .meson-build-for-tests
- .use-debian/x86_64_build
variables:
UNWIND: "enabled"
C_ARGS: >
-Wno-error=deprecated-declarations
CPP_ARGS: >
-Wno-error=deprecated-declarations
DRI_LOADERS: >
-D glx=dri
-D gbm=enabled
-D egl=enabled
-D glvnd=disabled
-D platforms=x11,wayland
GALLIUM_ST: >
-D gallium-extra-hud=true
-D gallium-vdpau=enabled
-D gallium-va=enabled
-D gallium-rusticl=false
-D legacy-wayland=bind-wayland-display
GALLIUM_DRIVERS: "i915,iris,nouveau,r300,r600,freedreno,llvmpipe,softpipe,svga,v3d,vc4,virgl,etnaviv,panfrost,lima,zink,d3d12,asahi,crocus"
VULKAN_DRIVERS: "intel_hasvk,imagination-experimental,microsoft-experimental,nouveau,swrast"
BUILDTYPE: "debugoptimized"
EXTRA_OPTION: >
-D spirv-to-dxil=true
-D tools=drm-shim,etnaviv,freedreno,glsl,intel,intel-ui,nir,nouveau,lima,panfrost,asahi
-D perfetto=true
S3_ARTIFACT_NAME: debian-build-x86_64
# Test a release build with -Werror so new warnings don't sneak in.
debian-release:
extends:
- .meson-build-only
- .use-debian/x86_64_build
variables:
UNWIND: "enabled"
C_ARGS: >
-Wno-error=stringop-overread
-Wno-error=deprecated-declarations
CPP_ARGS: >
-Wno-error=deprecated-declarations
DRI_LOADERS: >
-D glx=dri
-D gbm=enabled
-D egl=enabled
-D glvnd=disabled
-D platforms=x11,wayland
GALLIUM_ST: >
-D gallium-extra-hud=true
-D gallium-vdpau=enabled
-D gallium-va=enabled
-D gallium-rusticl=false
-D llvm=enabled
GALLIUM_DRIVERS: "i915,iris,nouveau,r300,freedreno,llvmpipe,softpipe,svga,v3d,vc4,virgl,etnaviv,panfrost,lima,zink,d3d12,asahi,crocus"
VULKAN_DRIVERS: "swrast,intel_hasvk,imagination-experimental,microsoft-experimental"
EXTRA_OPTION: >
-D spirv-to-dxil=true
-D tools=all
-D mesa-clc=enabled
-D precomp-compiler=enabled
-D intel-rt=enabled
-D imagination-srv=true
BUILDTYPE: "release"
S3_ARTIFACT_NAME: "mesa-x86_64-default-${BUILDTYPE}"
script:
- !reference [.meson-build-only, script]
- 'if [ -n "$MESA_CI_PERFORMANCE_ENABLED" ]; then .gitlab-ci/prepare-artifacts.sh; fi'
alpine-build-testing:
extends:
- .meson-build-only
- .use-alpine/x86_64_build
variables:
BUILDTYPE: "release"
C_ARGS: >
-Wno-error=cpp
-Wno-error=array-bounds
-Wno-error=stringop-overflow
-Wno-error=stringop-overread
-Wno-error=deprecated-declarations
DRI_LOADERS: >
-D glx=disabled
-D gbm=enabled
-D egl=enabled
-D glvnd=disabled
-D platforms=wayland
GALLIUM_DRIVERS: "crocus,etnaviv,freedreno,iris,lima,nouveau,panfrost,r300,r600,radeonsi,svga,llvmpipe,softpipe,tegra,v3d,vc4,virgl,zink"
GALLIUM_ST: >
-D gallium-extra-hud=true
-D gallium-vdpau=disabled
-D gallium-va=enabled
-D gallium-rusticl=false
-D gles1=disabled
-D gles2=enabled
-D llvm=enabled
-D llvm-orcjit=true
-D microsoft-clc=disabled
-D shared-llvm=enabled
UNWIND: "disabled"
VULKAN_DRIVERS: "amd,broadcom,freedreno,intel,imagination-experimental"
fedora-release:
extends:
- .meson-build-only
- .use-fedora/x86_64_build
- .build-run-long
# LTO builds can be really very slow, and we have no way to specify different
# timeouts for pre-merge and nightly jobs
timeout: 1h
variables:
BUILDTYPE: "release"
# array-bounds are pure non-LTO gcc buggy warning
# maybe-uninitialized is misfiring in nir_lower_gs_intrinsics.c, and
# a "maybe" warning should never be an error anyway.
C_ARGS: >
-Wno-error=stringop-overflow
-Wno-error=stringop-overread
-Wno-error=array-bounds
-Wno-error=maybe-uninitialized
-Wno-error=deprecated-declarations
CPP_ARGS: >
-Wno-error=dangling-reference
-Wno-error=overloaded-virtual
-Wno-error=deprecated-declarations
DRI_LOADERS: >
-D glx=dri
-D gbm=enabled
-D egl=enabled
-D glvnd=enabled
-D platforms=x11,wayland
EXTRA_OPTION: >
-D tools=drm-shim,etnaviv,freedreno,glsl,intel,nir,nouveau,lima,panfrost,imagination
-D vulkan-layers=device-select,overlay
-D intel-rt=enabled
-D imagination-srv=true
-D teflon=true
GALLIUM_DRIVERS: "crocus,etnaviv,freedreno,i915,iris,lima,nouveau,panfrost,r300,r600,radeonsi,svga,llvmpipe,softpipe,tegra,v3d,vc4,virgl,zink"
GALLIUM_ST: >
-D gallium-extra-hud=true
-D gallium-vdpau=enabled
-D gallium-va=enabled
-D gallium-rusticl=true
-D gles1=disabled
-D gles2=enabled
-D llvm=enabled
-D microsoft-clc=disabled
-D shared-llvm=enabled
UNWIND: "disabled"
VULKAN_DRIVERS: "amd,asahi,broadcom,freedreno,imagination-experimental,intel,intel_hasvk"
debian-android:
extends:
- .android-variables
- .meson-cross
- .use-debian/android_build
- .ci-deqp-artifacts
- .meson-build-for-tests
variables:
BUILDTYPE: debug
UNWIND: "disabled"
C_ARGS: >
-Wno-error=asm-operand-widths
-Wno-error=constant-conversion
-Wno-error=enum-conversion
-Wno-error=initializer-overrides
-Wno-error=sometimes-uninitialized
-Wno-error=deprecated-declarations
CPP_ARGS: >
-Wno-error=c99-designator
-Wno-error=unused-variable
-Wno-error=unused-but-set-variable
-Wno-error=self-assign
-Wno-error=deprecated-declarations
DRI_LOADERS: >
-D glx=disabled
-D gbm=disabled
-D egl=enabled
-D glvnd=disabled
-D platforms=android
FORCE_FALLBACK_FOR: llvm
EXTRA_OPTION: >
-D amd-use-llvm=false
-D android-stub=true
-D platform-sdk-version=${ANDROID_SDK_VERSION}
-D cpp_rtti=false
-D valgrind=disabled
-D android-libbacktrace=disabled
-D mesa-clc=system
-D precomp-compiler=system
GALLIUM_ST: >
-D gallium-vdpau=disabled
-D gallium-va=disabled
-D gallium-rusticl=false
PKG_CONFIG_LIBDIR: "/disable/non/android/system/pc/files"
HOST_BUILD_OPTIONS: >
-D build-tests=false
-D enable-glcpp-tests=false
-D gallium-drivers=
-D vulkan-drivers=
-D video-codecs=
-D glx=disabled
-D platforms=
-D mesa-clc=enabled
-D install-mesa-clc=true
-D precomp-compiler=enabled
-D install-precomp-compiler=true
-D tools=panfrost
S3_ARTIFACT_NAME: mesa-x86_64-android-${BUILDTYPE}
script:
# x86_64 build:
- export CROSS=x86_64-linux-android
- export GALLIUM_DRIVERS=iris,radeonsi,softpipe,virgl,zink
- export VULKAN_DRIVERS=amd,intel,swrast,virtio
- .gitlab-ci/create-llvm-meson-wrap-file.sh
- !reference [.meson-build-for-tests, script]
# remove all the files created by the previous build before the next build
- git clean -dxf .
# aarch64 build:
# build-only, to catch compilation regressions
# without calling .gitlab-ci/prepare-artifacts.sh so that the
# artifacts are not shipped in mesa-x86_64-android-${BUILDTYPE}
- export CROSS=aarch64-linux-android
- export GALLIUM_DRIVERS=etnaviv,freedreno,lima,panfrost,vc4,v3d
- export VULKAN_DRIVERS=freedreno,broadcom,virtio
- !reference [.meson-build-only, script]
.meson-cross:
extends:
- .meson-build-only
- .use-debian/x86_64_build
variables:
UNWIND: "disabled"
DRI_LOADERS: >
-D glx=dri
-D gbm=enabled
-D egl=enabled
-D platforms=x11,wayland
GALLIUM_ST: >
-D gallium-vdpau=disabled
-D gallium-va=disabled
.meson-arm:
extends:
- .meson-cross
- .use-debian/arm64_build
variables:
VULKAN_DRIVERS: "asahi,broadcom,freedreno"
GALLIUM_DRIVERS: "etnaviv,freedreno,lima,nouveau,panfrost,llvmpipe,softpipe,tegra,v3d,vc4,zink"
BUILDTYPE: "debugoptimized"
debian-arm32:
extends:
- .meson-arm
- .ci-deqp-artifacts
- .meson-build-for-tests
variables:
CROSS: armhf
DRI_LOADERS:
-D glvnd=disabled
# remove asahi & llvmpipe from the .meson-arm list because here we have llvm=disabled
VULKAN_DRIVERS: "broadcom,freedreno"
GALLIUM_DRIVERS: "etnaviv,freedreno,lima,nouveau,panfrost,softpipe,tegra,v3d,vc4,zink"
EXTRA_OPTION: >
-D llvm=disabled
-D valgrind=disabled
-D gallium-rusticl=false
-D mesa-clc=system
-D precomp-compiler=system
HOST_BUILD_OPTIONS: >
-D build-tests=false
-D enable-glcpp-tests=false
-D gallium-drivers=
-D vulkan-drivers=
-D video-codecs=
-D glx=disabled
-D platforms=
-D mesa-clc=enabled
-D install-mesa-clc=true
-D precomp-compiler=enabled
-D install-precomp-compiler=true
-D tools=panfrost
S3_ARTIFACT_NAME: mesa-arm32-default-${BUILDTYPE}
# The strip command segfaults, failing to strip the binary and leaving
# tempfiles in our artifacts.
ARTIFACTS_DEBUG_SYMBOLS: 1
debian-arm32-asan:
extends:
- debian-arm32
- .meson-build-for-tests
- .build-run-long
variables:
GALLIUM_DRIVERS: "etnaviv"
VULKAN_DRIVERS: ""
DRI_LOADERS:
-D glvnd=disabled
EXTRA_OPTION: >
-D llvm=disabled
-D b_sanitize=address
-D valgrind=disabled
-D tools=dlclose-skip
-D gallium-rusticl=false
ARTIFACTS_DEBUG_SYMBOLS: 1
RUN_MESON_TESTS: "false" # just too slow
S3_ARTIFACT_NAME: mesa-arm32-asan-${BUILDTYPE}
debian-arm64:
extends:
- .meson-arm
- .ci-deqp-artifacts
- .meson-build-for-tests
variables:
C_ARGS: >
-Wno-error=array-bounds
-Wno-error=stringop-truncation
-Wno-error=deprecated-declarations
GALLIUM_DRIVERS: "etnaviv,freedreno,lima,panfrost,v3d,vc4,zink"
VULKAN_DRIVERS: "broadcom,freedreno,panfrost"
DRI_LOADERS:
-D glvnd=disabled
EXTRA_OPTION: >
-D valgrind=disabled
-D imagination-srv=true
-D freedreno-kmds=msm,virtio
-D teflon=true
GALLIUM_ST:
-D gallium-rusticl=true
RUN_MESON_TESTS: "false" # run by debian-arm64-build-testing
S3_ARTIFACT_NAME: mesa-arm64-default-${BUILDTYPE}
debian-arm64-asan:
extends:
- debian-arm64
- .meson-build-for-tests
- .build-run-long
variables:
VULKAN_DRIVERS: "broadcom,freedreno"
GALLIUM_DRIVERS: "freedreno,vc4,v3d"
C_ARGS: >
-Wno-error=deprecated-declarations
DRI_LOADERS:
-D glvnd=disabled
EXTRA_OPTION: >
-D b_sanitize=address
-D valgrind=disabled
-D tools=dlclose-skip
-D gallium-rusticl=false
ARTIFACTS_DEBUG_SYMBOLS: 1
RUN_MESON_TESTS: "false" # just too slow
S3_ARTIFACT_NAME: mesa-arm64-asan-${BUILDTYPE}
debian-arm64-ubsan:
extends:
- debian-arm64
- .meson-build-for-tests
- .build-run-long
variables:
VULKAN_DRIVERS: "broadcom"
GALLIUM_DRIVERS: "v3d,vc4"
C_ARGS: >
-Wno-error=array-bounds
-Wno-error=stringop-overflow
-Wno-error=stringop-truncation
-Wno-error=deprecated-declarations
CPP_ARGS: >
-Wno-error=array-bounds
-fno-var-tracking-assignments
DRI_LOADERS:
-D glvnd=disabled
EXTRA_OPTION: >
-D b_sanitize=undefined
-D gallium-rusticl=false
ARTIFACTS_DEBUG_SYMBOLS: 1
RUN_MESON_TESTS: "false" # just too slow
S3_ARTIFACT_NAME: mesa-arm64-ubsan-${BUILDTYPE}
debian-arm64-build-test:
extends:
- .meson-arm
- .ci-deqp-artifacts
- .meson-build-only
variables:
VULKAN_DRIVERS: "amd,asahi,imagination-experimental,nouveau"
DRI_LOADERS:
-D glvnd=disabled
EXTRA_OPTION: >
-D tools=panfrost,imagination
-D perfetto=true
debian-arm64-release:
extends:
- debian-arm64
- .meson-build-only
variables:
BUILDTYPE: release
S3_ARTIFACT_NAME: mesa-arm64-default-${BUILDTYPE}
C_ARGS: >
-Wno-error=array-bounds
-Wno-error=stringop-overread
-Wno-error=deprecated-declarations
script:
- !reference [.meson-build-only, script]
- 'if [ -n "$MESA_CI_PERFORMANCE_ENABLED" ]; then .gitlab-ci/prepare-artifacts.sh; fi'
debian-no-libdrm:
extends:
- .meson-arm
- .meson-build-only
variables:
VULKAN_DRIVERS: freedreno
GALLIUM_DRIVERS: "zink,llvmpipe"
BUILDTYPE: release
C_ARGS: >
-Wno-error=stringop-overread
-Wno-error=deprecated-declarations
EXTRA_OPTION: >
-D freedreno-kmds=kgsl
-D glx=disabled
-D gbm=disabled
-D egl=disabled
-D perfetto=true
debian-clang:
extends:
- .meson-build-only
- .use-debian/x86_64_build
variables:
BUILDTYPE: debug
UNWIND: "enabled"
C_ARGS: >
-Wno-error=constant-conversion
-Wno-error=enum-conversion
-Wno-error=initializer-overrides
-Wno-error=sometimes-uninitialized
-Werror=misleading-indentation
-Wno-error=deprecated-declarations
CPP_ARGS: >
-Wno-error=c99-designator
-Wno-error=overloaded-virtual
-Wno-error=tautological-constant-out-of-range-compare
-Wno-error=unused-private-field
-Wno-error=vla-cxx-extension
-Wno-error=deprecated-declarations
DRI_LOADERS: >
-D glx=dri
-D gbm=enabled
-D egl=enabled
-D glvnd=enabled
-D platforms=x11,wayland
GALLIUM_ST: >
-D gallium-extra-hud=true
-D gallium-vdpau=enabled
-D gallium-va=enabled
-D gles1=enabled
-D gles2=enabled
-D llvm=enabled
-D microsoft-clc=disabled
-D shared-llvm=enabled
GALLIUM_DRIVERS: "iris,nouveau,r300,r600,freedreno,llvmpipe,softpipe,svga,v3d,vc4,virgl,etnaviv,panfrost,lima,zink,radeonsi,tegra,d3d12,crocus,i915,asahi"
VULKAN_DRIVERS: intel,amd,freedreno,broadcom,virtio,swrast,panfrost,imagination-experimental,microsoft-experimental,nouveau
EXTRA_OPTION:
-D spirv-to-dxil=true
-D imagination-srv=true
-D tools=drm-shim,etnaviv,freedreno,glsl,intel,intel-ui,nir,nouveau,lima,panfrost,asahi,imagination
-D vulkan-layers=device-select,overlay
-D build-radv-tests=true
-D build-aco-tests=true
-D mesa-clc=enabled
-D precomp-compiler=enabled
-D intel-rt=enabled
-D imagination-srv=true
-D teflon=true
CC: clang-${LLVM_VERSION}
CXX: clang++-${LLVM_VERSION}
debian-clang-release:
extends:
- debian-clang
- .meson-build-only
- .build-run-long
variables:
BUILDTYPE: "release"
C_ARGS: >
-Wno-error=constant-conversion
-Wno-error=enum-conversion
-Wno-error=initializer-overrides
-Wno-error=sometimes-uninitialized
-Wno-error=deprecated-declarations
CPP_ARGS: >
-Wno-error=c99-designator
-Wno-error=overloaded-virtual
-Wno-error=tautological-constant-out-of-range-compare
-Wno-error=unused-private-field
-Wno-error=vla-cxx-extension
-Wno-error=deprecated-declarations
DRI_LOADERS: >
-D glx=xlib
-D platforms=x11,wayland
GALLIUM_ST: >
-D gallium-extra-hud=true
-D gallium-vdpau=enabled
-D gallium-va=enabled
-D gles1=disabled
-D gles2=disabled
-D llvm=enabled
-D microsoft-clc=disabled
-D shared-llvm=enabled
windows-msvc:
extends:
- .build-windows
- .use-windows_build_msvc
- .windows-build-rules
stage: build-for-tests
script:
- pwsh -ExecutionPolicy RemoteSigned .\.gitlab-ci\windows\mesa_build.ps1
artifacts:
paths:
- _build/meson-logs/*.txt
- _install/
debian-vulkan:
extends:
- .meson-build-only
- .use-debian/x86_64_build
variables:
BUILDTYPE: debug
UNWIND: "disabled"
DRI_LOADERS: >
-D glx=disabled
-D gbm=disabled
-D egl=disabled
-D opengl=false
-D gles1=disabled
-D gles2=disabled
-D glvnd=disabled
-D platforms=x11,wayland
GALLIUM_ST: >
-D gallium-vdpau=disabled
-D gallium-va=disabled
-D gallium-rusticl=false
-D b_sanitize=undefined
-D c_args=-fno-sanitize-recover=all
-D cpp_args=-fno-sanitize-recover=all
UBSAN_OPTIONS: "print_stacktrace=1"
VULKAN_DRIVERS: amd,asahi,broadcom,freedreno,intel,intel_hasvk,panfrost,virtio,imagination-experimental,microsoft-experimental,nouveau
EXTRA_OPTION: >
-D vulkan-layers=device-select,overlay
-D build-radv-tests=true
-D build-aco-tests=true
-D intel-rt=disabled
-D imagination-srv=true
debian-x86_32:
extends:
- .meson-cross
- .use-debian/x86_32_build
- .meson-build-only
- .build-run-long # it's not clear why this runs long, but it also doesn't matter much
variables:
BUILDTYPE: debug
CROSS: i386
VULKAN_DRIVERS: intel,amd,swrast,virtio,panfrost
GALLIUM_DRIVERS: "iris,nouveau,r300,r600,radeonsi,llvmpipe,softpipe,virgl,zink,crocus,d3d12,panfrost"
DRI_LOADERS:
-D glvnd=disabled
EXTRA_OPTION: >
-D vulkan-layers=device-select,overlay
-D mesa-clc=system
CPP_ARGS: >
-Wno-error=deprecated-declarations
C_LINK_ARGS: >
-Wl,--no-warn-rwx-segments
CPP_LINK_ARGS: >
-Wl,--no-warn-rwx-segments
HOST_BUILD_OPTIONS: >
-D build-tests=false
-D enable-glcpp-tests=false
-D gallium-drivers=
-D vulkan-drivers=
-D video-codecs=
-D glx=disabled
-D platforms=
-D mesa-clc=enabled
-D install-mesa-clc=true
# While s390 is dead, s390x is very much alive, and one of the last major
# big-endian platforms, so it provides useful coverage.
# In case of issues with this job, contact @ajax
debian-s390x:
extends:
- .meson-cross
- .use-debian/s390x_build
- .meson-build-only
tags:
- $FDO_RUNNER_JOB_PRIORITY_TAG_X86_64_KVM
variables:
BUILDTYPE: debug
CROSS: s390x
GALLIUM_DRIVERS: "llvmpipe,virgl,zink"
VULKAN_DRIVERS: "swrast,virtio"
DRI_LOADERS:
-D glvnd=disabled
debian-ppc64el:
extends:
- .meson-cross
- .use-debian/ppc64el_build
- .meson-build-only
variables:
BUILDTYPE: debug
CROSS: ppc64el
GALLIUM_DRIVERS: "nouveau,llvmpipe,softpipe,virgl,zink"
VULKAN_DRIVERS: "swrast"
DRI_LOADERS:
-D glvnd=disabled

View File

@@ -1,268 +0,0 @@
# For CI-tron based testing farm jobs.
.ci-tron-test:
extends:
- .ci-tron-b2c-job-v1
variables:
GIT_STRATEGY: none
B2C_VERSION: v0.9.15.1 # Linux 6.13.7
SCRIPTS_DIR: install
CI_TRON_PATTERN__JOB_SUCCESS__REGEX: 'hwci: mesa: exit_code: 0\r$'
CI_TRON_PATTERN__SESSION_END__REGEX: '^.*It''s now safe to turn off your computer\r$'
CI_TRON_TIMEOUT__FIRST_CONSOLE_ACTIVITY__MINUTES: 2
CI_TRON_TIMEOUT__FIRST_CONSOLE_ACTIVITY__RETRIES: 3
CI_TRON_TIMEOUT__CONSOLE_ACTIVITY__MINUTES: 5
CI_TRON__B2C_ARTIFACT_EXCLUSION: "*.shader_cache,install/*,*/install/*,*/vkd3d-proton.cache*,vkd3d-proton.cache*,*.qpa"
CI_TRON_HTTP_ARTIFACT__INSTALL__PATH: "/install.tar.zst"
CI_TRON_HTTP_ARTIFACT__INSTALL__URL: "https://$PIPELINE_ARTIFACTS_BASE/$S3_ARTIFACT_NAME.tar.zst"
CI_TRON__B2C_MACHINE_REGISTRATION_CMD: "setup --tags $CI_TRON_DUT_SETUP_TAGS"
CI_TRON__B2C_IMAGE_UNDER_TEST: $MESA_IMAGE
CI_TRON__B2C_EXEC_CMD: "curl --silent --fail-with-body {{ job.http.url }}$CI_TRON_HTTP_ARTIFACT__INSTALL__PATH | tar --zstd --extract && $SCRIPTS_DIR/common/init-stage2.sh"
# Assume by default this is running deqp, as that's almost always true
HWCI_TEST_SCRIPT: install/deqp-runner.sh
# Keep the job script in the artifacts
CI_TRON_JOB_SCRIPT_PATH: results/job_script.sh
needs:
- !reference [.required-for-hardware-jobs, needs]
tags:
- farm:$RUNNER_FARM_LOCATION
- $CI_TRON_DUT_SETUP_TAGS
# Override the default before_script, as it is not compatible with the CI-tron environment. We just keep the clearing
# of the JWT token for security reasons
before_script:
- |
set -eu
eval "$S3_JWT_FILE_SCRIPT"
for var in CI_TRON_DUT_SETUP_TAGS; do
if [[ -z "$(eval echo \${$var:-})" ]]; then
echo "The required variable '$var' is missing"
exit 1
fi
done
# Open a section that will be closed by b2c
echo -e "\n\e[0Ksection_start:`date +%s`:b2c_kernel_boot[collapsed=true]\r\e[0K\e[0;36m[$(cut -d ' ' -f1 /proc/uptime)]: Submitting the CI-tron job and booting the DUT\e[0m\n"
# Anything our job places in results/ will be collected by the
# Gitlab coordinator for status presentation. results/junit.xml
# will be parsed by the UI for more detailed explanations of
# test execution.
artifacts:
when: always
name: "${CI_PROJECT_NAME}_${CI_JOB_NAME_SLUG}"
paths:
- results
reports:
junit: results/**/junit.xml
.ci-tron-x86_64-test:
extends:
- .ci-tron-test
variables:
CI_TRON_INITRAMFS__B2C__URL: 'https://gitlab.freedesktop.org/gfx-ci/boot2container/-/releases/$B2C_VERSION/downloads/initramfs.linux_amd64.cpio.xz'
CI_TRON_KERNEL__URL: 'https://gitlab.freedesktop.org/gfx-ci/boot2container/-/releases/$B2C_VERSION/downloads/linux-x86_64'
# Set the following variables if you need AMD, Intel, or NVIDIA support
# CI_TRON_INITRAMFS__DEPMOD__URL: "https://gitlab.freedesktop.org/gfx-ci/boot2container/-/releases/$B2C_VERSION/downloads/linux-x86_64.depmod.cpio.xz"
# CI_TRON_INITRAMFS__GPU__URL: "https://gitlab.freedesktop.org/gfx-ci/boot2container/-/releases/$B2C_VERSION/downloads/linux-x86_64.gpu.cpio"
# CI_TRON_INITRAMFS__GPU__FORMAT__0__ARCHIVE__KEEP__0__PATH: "(lib/(modules|firmware/amdgpu)/.*)"
S3_ARTIFACT_NAME: "mesa-x86_64-default-debugoptimized"
.ci-tron-x86_64-test-vk:
extends:
- .use-debian/x86_64_test-vk
- .ci-tron-x86_64-test
needs:
- job: debian/x86_64_test-vk
artifacts: false
optional: true
- job: debian-x86_64
artifacts: false
- !reference [.ci-tron-test, needs]
.ci-tron-x86_64-test-vk-manual:
extends:
- .use-debian/x86_64_test-vk
- .ci-tron-x86_64-test
variables:
S3_ARTIFACT_NAME: "debian-build-x86_64"
needs:
- job: debian/x86_64_test-vk
artifacts: false
optional: true
- job: debian-build-x86_64
artifacts: false
- !reference [.ci-tron-test, needs]
.ci-tron-x86_64-test-gl:
extends:
- .use-debian/x86_64_test-gl
- .ci-tron-x86_64-test
needs:
- job: debian/x86_64_test-gl
artifacts: false
optional: true
- job: debian-x86_64
artifacts: false
- !reference [.ci-tron-test, needs]
.ci-tron-x86_64-test-gl-manual:
extends:
- .use-debian/x86_64_test-gl
- .ci-tron-x86_64-test
variables:
S3_ARTIFACT_NAME: "debian-build-x86_64"
needs:
- job: debian/x86_64_test-gl
artifacts: false
optional: true
- job: debian-build-x86_64
artifacts: false
- !reference [.ci-tron-test, needs]
.ci-tron-arm64-test:
extends:
- .ci-tron-test
variables:
CI_TRON_INITRAMFS__B2C__URL: 'https://gitlab.freedesktop.org/gfx-ci/boot2container/-/releases/$B2C_VERSION/downloads/initramfs.linux_arm64.cpio.xz'
CI_TRON_KERNEL__URL: 'https://gitlab.freedesktop.org/gfx-ci/boot2container/-/releases/$B2C_VERSION/downloads/linux-arm64'
S3_ARTIFACT_NAME: "mesa-arm64-default-debugoptimized"
.ci-tron-arm64-test-vk:
extends:
- .use-debian/arm64_test-vk
- .ci-tron-arm64-test
needs:
- job: debian/arm64_test-vk
artifacts: false
optional: true
- job: debian-arm64
artifacts: false
- !reference [.ci-tron-test, needs]
.ci-tron-arm64-test-asan-vk:
extends:
- .use-debian/arm64_test-vk
- .ci-tron-arm64-test
variables:
S3_ARTIFACT_NAME: "mesa-arm64-asan-debugoptimized"
DEQP_FORCE_ASAN: 1
needs:
- job: debian/arm64_test-vk
artifacts: false
optional: true
- job: debian-arm64-asan
artifacts: false
- !reference [.ci-tron-test, needs]
.ci-tron-arm64-test-ubsan-vk:
extends:
- .use-debian/arm64_test-vk
- .ci-tron-arm64-test
variables:
S3_ARTIFACT_NAME: "mesa-arm64-ubsan-debugoptimized"
needs:
- job: debian/arm64_test-vk
artifacts: false
optional: true
- job: debian-arm64-ubsan
artifacts: false
- !reference [.ci-tron-test, needs]
.ci-tron-arm64-test-gl:
extends:
- .use-debian/arm64_test-gl
- .ci-tron-arm64-test
needs:
- job: debian/arm64_test-gl
artifacts: false
optional: true
- job: debian-arm64
artifacts: false
- !reference [.ci-tron-test, needs]
.ci-tron-arm64-test-asan-gl:
extends:
- .use-debian/arm64_test-gl
- .ci-tron-arm64-test
variables:
S3_ARTIFACT_NAME: "mesa-arm64-asan-debugoptimized"
DEQP_FORCE_ASAN: 1
needs:
- job: debian/arm64_test-gl
artifacts: false
optional: true
- job: debian-arm64-asan
artifacts: false
- !reference [.ci-tron-test, needs]
.ci-tron-arm64-test-ubsan-gl:
extends:
- .use-debian/arm64_test-gl
- .ci-tron-arm64-test
variables:
S3_ARTIFACT_NAME: "mesa-arm64-ubsan-debugoptimized"
needs:
- job: debian/arm64_test-gl
artifacts: false
optional: true
- job: debian-arm64-ubsan
artifacts: false
- !reference [.ci-tron-test, needs]
.ci-tron-arm32-test:
extends:
- .ci-tron-test
variables:
CI_TRON_INITRAMFS__B2C__URL: 'https://gitlab.freedesktop.org/gfx-ci/boot2container/-/releases/$B2C_VERSION/downloads/initramfs.linux_arm.cpio.xz'
CI_TRON_KERNEL__URL: 'https://gitlab.freedesktop.org/gfx-ci/boot2container/-/releases/$B2C_VERSION/downloads/linux-arm'
S3_ARTIFACT_NAME: "mesa-arm32-default-debugoptimized"
.ci-tron-arm32-test-vk:
extends:
- .use-debian/arm32_test-vk
- .ci-tron-arm32-test
needs:
- job: debian/arm32_test-vk
artifacts: false
optional: true
- job: debian-arm32
artifacts: false
- !reference [.ci-tron-test, needs]
.ci-tron-arm32-test-gl:
extends:
- .use-debian/arm32_test-gl
- .ci-tron-arm32-test
needs:
- job: debian/arm32_test-gl
artifacts: false
optional: true
- job: debian-arm32
artifacts: false
- !reference [.ci-tron-test, needs]
.ci-tron-arm32-test-asan-gl:
extends:
- .use-debian/arm32_test-gl
- .ci-tron-arm32-test
variables:
S3_ARTIFACT_NAME: "mesa-arm32-asan-debugoptimized"
DEQP_FORCE_ASAN: 1
needs:
- job: debian/arm32_test-gl
artifacts: false
optional: true
- job: debian-arm32-asan
artifacts: false
- !reference [.ci-tron-test, needs]

View File

@@ -1,35 +0,0 @@
#!/usr/bin/env bash
# shellcheck disable=SC2035
# shellcheck disable=SC2061
# shellcheck disable=SC2086 # we want word splitting
while true; do
devcds=$(find /sys/devices/virtual/devcoredump/ -name data 2>/dev/null)
for i in $devcds; do
echo "Found a devcoredump at $i."
if cp $i $RESULTS_DIR/first.devcore; then
echo 1 > $i
echo "Saved to the job artifacts at /first.devcore"
exit 0
fi
done
i915_error_states=$(find /sys/devices/ -path */drm/card*/error)
for i in $i915_error_states; do
tmpfile=$(mktemp)
cp "$i" "$tmpfile"
filesize=$(stat --printf="%s" "$tmpfile")
# Does the file contain "No error state collected" ?
if [ "$filesize" = 25 ]; then
rm "$tmpfile"
else
echo "Found an i915 error state at $i size=$filesize."
if cp "$tmpfile" $RESULTS_DIR/first.i915_error_state; then
rm "$tmpfile"
echo 1 > "$i"
echo "Saved to the job artifacts at /first.i915_error_state"
exit 0
fi
fi
done
sleep 10
done

View File

@@ -1,34 +0,0 @@
#!/bin/sh
# Very early init, used to make sure devices and network are set up and
# reachable.
# When changing this file, you need to bump the following
# .gitlab-ci/image-tags.yml tags:
# ALPINE_X86_64_LAVA_TRIGGER_TAG
set -ex
cd /
findmnt --mountpoint /proc || mount -t proc none /proc
findmnt --mountpoint /sys || mount -t sysfs none /sys
mount -t debugfs none /sys/kernel/debug
findmnt --mountpoint /dev || mount -t devtmpfs none /dev
mkdir -p /dev/pts
mount -t devpts devpts /dev/pts
mkdir /dev/shm
mount -t tmpfs -o noexec,nodev,nosuid tmpfs /dev/shm
mount -t tmpfs tmpfs /tmp
echo "nameserver 8.8.8.8" > /etc/resolv.conf
[ -z "$NFS_SERVER_IP" ] || echo "$NFS_SERVER_IP caching-proxy" >> /etc/hosts
# Set the time so we can validate certificates before we fetch anything;
# however as not all DUTs have network, make this non-fatal.
for _ in 1 2 3; do sntp -sS pool.ntp.org && break || sleep 2; done || true
# Create a symlink from /dev/fd to /proc/self/fd if /dev/fd is missing.
if [ ! -e /dev/fd ]; then
ln -s /proc/self/fd /dev/fd
fi

View File

@@ -1,240 +0,0 @@
#!/bin/bash
# shellcheck disable=SC1090
# shellcheck disable=SC1091
# shellcheck disable=SC2086 # we want word splitting
# shellcheck disable=SC2155
# Second-stage init, used to set up devices and our job environment before
# running tests.
shopt -s extglob
# Make sure to kill itself and all the children process from this script on
# exiting, since any console output may interfere with LAVA signals handling,
# which based on the log console.
cleanup() {
if [ "$BACKGROUND_PIDS" = "" ]; then
return 0
fi
set +x
echo "Killing all child processes"
for pid in $BACKGROUND_PIDS
do
kill "$pid" 2>/dev/null || true
done
# Sleep just a little to give enough time for subprocesses to be gracefully
# killed. Then apply a SIGKILL if necessary.
sleep 5
for pid in $BACKGROUND_PIDS
do
kill -9 "$pid" 2>/dev/null || true
done
BACKGROUND_PIDS=
set -x
}
trap cleanup INT TERM EXIT
# Space separated values with the PIDS of the processes started in the
# background by this script
BACKGROUND_PIDS=
for path in '/dut-env-vars.sh' '/set-job-env-vars.sh' './set-job-env-vars.sh'; do
[ -f "$path" ] && source "$path"
done
. "$SCRIPTS_DIR"/setup-test-env.sh
# Flush out anything which might be stuck in a serial buffer
echo
echo
echo
section_switch init_stage2 "Pre-testing hardware setup"
set -ex
# Set up any devices required by the jobs
[ -z "$HWCI_KERNEL_MODULES" ] || {
echo -n $HWCI_KERNEL_MODULES | xargs -d, -n1 /usr/sbin/modprobe
}
# Set up ZRAM
HWCI_ZRAM_SIZE=2G
if /sbin/zramctl --find --size $HWCI_ZRAM_SIZE -a zstd; then
mkswap /dev/zram0
swapon /dev/zram0
echo "zram: $HWCI_ZRAM_SIZE activated"
else
echo "zram: skipping, not supported"
fi
#
# Load the KVM module specific to the detected CPU virtualization extensions:
# - vmx for Intel VT
# - svm for AMD-V
#
if [ -n "$HWCI_ENABLE_X86_KVM" ]; then
unset KVM_KERNEL_MODULE
{
grep -qs '\bvmx\b' /proc/cpuinfo && KVM_KERNEL_MODULE=kvm_intel
} || {
grep -qs '\bsvm\b' /proc/cpuinfo && KVM_KERNEL_MODULE=kvm_amd
}
{
[ -z "${KVM_KERNEL_MODULE}" ] && \
echo "WARNING: Failed to detect CPU virtualization extensions"
} || \
modprobe ${KVM_KERNEL_MODULE}
fi
# Fix prefix confusion: the build installs to $CI_PROJECT_DIR, but we expect
# it in /install
ln -sf $CI_PROJECT_DIR/install /install
export LD_LIBRARY_PATH=/install/lib
export LIBGL_DRIVERS_PATH=/install/lib/dri
# https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22495#note_1876691
# The navi21 boards seem to have trouble with ld.so.cache, so try explicitly
# telling it to look in /usr/local/lib.
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
# The Broadcom devices need /usr/local/bin unconditionally added to the path
export PATH=/usr/local/bin:$PATH
# Store Mesa's disk cache under /tmp, rather than sending it out over NFS.
export XDG_CACHE_HOME=/tmp
# Make sure Python can find all our imports
export PYTHONPATH=$(python3 -c "import sys;print(\":\".join(sys.path))")
# If we need to specify a driver, it means several drivers could pick up this gpu;
# ensure that the other driver can't accidentally be used
if [ -n "$MESA_LOADER_DRIVER_OVERRIDE" ]; then
rm /install/lib/dri/!($MESA_LOADER_DRIVER_OVERRIDE)_dri.so
fi
ls -1 /install/lib/dri/*_dri.so || true
if [ "$HWCI_FREQ_MAX" = "true" ]; then
# Ensure initialization of the DRM device (needed by MSM)
head -0 /dev/dri/renderD128
# Disable GPU frequency scaling
DEVFREQ_GOVERNOR=$(find /sys/devices -name governor | grep gpu || true)
test -z "$DEVFREQ_GOVERNOR" || echo performance > $DEVFREQ_GOVERNOR || true
# Disable CPU frequency scaling
echo performance | tee -a /sys/devices/system/cpu/cpufreq/policy*/scaling_governor || true
# Disable GPU runtime power management
GPU_AUTOSUSPEND=$(find /sys/devices -name autosuspend_delay_ms | grep gpu | head -1)
test -z "$GPU_AUTOSUSPEND" || echo -1 > $GPU_AUTOSUSPEND || true
# Lock Intel GPU frequency to 70% of the maximum allowed by hardware
# and enable throttling detection & reporting.
# Additionally, set the upper limit for CPU scaling frequency to 65% of the
# maximum permitted, as an additional measure to mitigate thermal throttling.
/install/common/intel-gpu-freq.sh -s 70% --cpu-set-max 65% -g all -d
fi
# Start a little daemon to capture sysfs records and produce a JSON file
KDL_PATH=/install/common/kdl.sh
if [ -x "$KDL_PATH" ]; then
echo "launch kdl.sh!"
$KDL_PATH &
BACKGROUND_PIDS="$! $BACKGROUND_PIDS"
else
echo "kdl.sh not found!"
fi
# Increase freedreno hangcheck timer because it's right at the edge of the
# spilling tests timing out (and some traces, too)
if [ -n "$FREEDRENO_HANGCHECK_MS" ]; then
echo $FREEDRENO_HANGCHECK_MS | tee -a /sys/kernel/debug/dri/128/hangcheck_period_ms
fi
# Start a little daemon to capture the first devcoredump we encounter. (They
# expire after 5 minutes, so we poll for them).
CAPTURE_DEVCOREDUMP=/install/common/capture-devcoredump.sh
if [ -x "$CAPTURE_DEVCOREDUMP" ]; then
$CAPTURE_DEVCOREDUMP &
BACKGROUND_PIDS="$! $BACKGROUND_PIDS"
fi
ARCH=$(uname -m)
export VK_DRIVER_FILES="/install/share/vulkan/icd.d/${VK_DRIVER}_icd.$ARCH.json"
# If we want Xorg to be running for the test, then we start it up before the
# HWCI_TEST_SCRIPT because we need to use xinit to start X (otherwise
# without using -displayfd you can race with Xorg's startup), but xinit will eat
# your client's return code
if [ -n "$HWCI_START_XORG" ]; then
echo "touch /xorg-started; sleep 100000" > /xorg-script
env \
xinit /bin/sh /xorg-script -- /usr/bin/Xorg -noreset -s 0 -dpms -logfile "$RESULTS_DIR/Xorg.0.log" &
BACKGROUND_PIDS="$! $BACKGROUND_PIDS"
# Wait for xorg to be ready for connections.
for _ in 1 2 3 4 5; do
if [ -e /xorg-started ]; then
break
fi
sleep 5
done
export DISPLAY=:0
fi
if [ -n "$HWCI_START_WESTON" ]; then
WESTON_X11_SOCK="/tmp/.X11-unix/X0"
if [ -n "$HWCI_START_XORG" ]; then
echo "Please consider dropping HWCI_START_XORG and instead using Weston XWayland for testing."
WESTON_X11_SOCK="/tmp/.X11-unix/X1"
fi
export WAYLAND_DISPLAY=wayland-0
# Display server is Weston Xwayland when HWCI_START_XORG is not set or Xorg when it's
export DISPLAY=:0
mkdir -p /tmp/.X11-unix
env weston --config="/install/common/weston.ini" -Swayland-0 --use-gl &
BACKGROUND_PIDS="$! $BACKGROUND_PIDS"
while [ ! -S "$WESTON_X11_SOCK" ]; do sleep 1; done
fi
set +x
section_end init_stage2
echo "Running ${HWCI_TEST_SCRIPT} ${HWCI_TEST_ARGS} ..."
set +e
$HWCI_TEST_SCRIPT ${HWCI_TEST_ARGS:-}; EXIT_CODE=$?
set -e
section_start post_test_cleanup "Cleaning up after testing, uploading results"
set -x
# Make sure that capture-devcoredump is done before we start trying to tar up
# artifacts -- if it's writing while tar is reading, tar will throw an error and
# kill the job.
cleanup
# upload artifacts (lava jobs)
if [ -n "$S3_RESULTS_UPLOAD" ]; then
tar --zstd -cf results.tar.zst results/;
ci-fairy s3cp --token-file "${S3_JWT_FILE}" results.tar.zst https://"$S3_RESULTS_UPLOAD"/results.tar.zst
fi
set +x
section_end post_test_cleanup
# Print the final result; both bare-metal and LAVA look for this string to get
# the result of our run, so try really hard to get it out rather than losing
# the run. The device gets shut down right at this point, and a630 seems to
# enjoy corrupting the last line of serial output before shutdown.
for _ in $(seq 0 3); do echo "hwci: mesa: exit_code: $EXIT_CODE"; sleep 1; echo; done
exit $EXIT_CODE

View File

@@ -1,820 +0,0 @@
#!/usr/bin/env bash
# shellcheck disable=SC2013
# shellcheck disable=SC2015
# shellcheck disable=SC2034
# shellcheck disable=SC2046
# shellcheck disable=SC2059
# shellcheck disable=SC2086 # we want word splitting
# shellcheck disable=SC2154
# shellcheck disable=SC2155
# shellcheck disable=SC2162
# shellcheck disable=SC2229
#
# This is an utility script to manage Intel GPU frequencies.
# It can be used for debugging performance problems or trying to obtain a stable
# frequency while benchmarking.
#
# Note the Intel i915 GPU driver allows to change the minimum, maximum and boost
# frequencies in steps of 50 MHz via:
#
# /sys/class/drm/card<n>/<freq_info>
#
# Where <n> is the DRM card index and <freq_info> one of the following:
#
# - gt_max_freq_mhz (enforced maximum freq)
# - gt_min_freq_mhz (enforced minimum freq)
# - gt_boost_freq_mhz (enforced boost freq)
#
# The hardware capabilities can be accessed via:
#
# - gt_RP0_freq_mhz (supported maximum freq)
# - gt_RPn_freq_mhz (supported minimum freq)
# - gt_RP1_freq_mhz (most efficient freq)
#
# The current frequency can be read from:
# - gt_act_freq_mhz (the actual GPU freq)
# - gt_cur_freq_mhz (the last requested freq)
#
# Intel later switched to per-tile sysfs interfaces, which is what the Xe DRM
# driver exlusively uses, and the capabilites are now located under the
# following directory for the first tile:
#
# /sys/class/drm/card<n>/device/tile0/gt0/freq0/<freq_info>
#
# Where <n> is the DRM card index and <freq_info> one of the following:
#
# - max_freq (enforced maximum freq)
# - min_freq (enforced minimum freq)
#
# The hardware capabilities can be accessed via:
#
# - rp0_freq (supported maximum freq)
# - rpn_freq (supported minimum freq)
# - rpe_freq (most efficient freq)
#
# The current frequency can be read from:
# - act_freq (the actual GPU freq)
# - cur_freq (the last requested freq)
#
# Also note that in addition to GPU management, the script offers the
# possibility to adjust CPU operating frequencies. However, this is currently
# limited to just setting the maximum scaling frequency as percentage of the
# maximum frequency allowed by the hardware.
#
# Copyright (C) 2022 Collabora Ltd.
# Author: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
#
# SPDX-License-Identifier: MIT
#
#
# Constants
#
# Check if any /sys/class/drm/cardX/device/tile0 directory exists to detect Xe
USE_XE=0
for i in $(seq 0 15); do
if [ -d "/sys/class/drm/card$i/device/tile0" ]; then
USE_XE=1
break
fi
done
# GPU
if [ "$USE_XE" -eq 1 ]; then
DRM_FREQ_SYSFS_PATTERN="/sys/class/drm/card%d/device/tile0/gt0/freq0/%s_freq"
ENF_FREQ_INFO="max min"
CAP_FREQ_INFO="rp0 rpn rpe"
else
DRM_FREQ_SYSFS_PATTERN="/sys/class/drm/card%d/gt_%s_freq_mhz"
ENF_FREQ_INFO="max min boost"
CAP_FREQ_INFO="RP0 RPn RP1"
fi
ACT_FREQ_INFO="act cur"
THROTT_DETECT_SLEEP_SEC=2
THROTT_DETECT_PID_FILE_PATH=/tmp/thrott-detect.pid
# CPU
CPU_SYSFS_PREFIX=/sys/devices/system/cpu
CPU_PSTATE_SYSFS_PATTERN="${CPU_SYSFS_PREFIX}/intel_pstate/%s"
CPU_FREQ_SYSFS_PATTERN="${CPU_SYSFS_PREFIX}/cpu%s/cpufreq/%s_freq"
CAP_CPU_FREQ_INFO="cpuinfo_max cpuinfo_min"
ENF_CPU_FREQ_INFO="scaling_max scaling_min"
ACT_CPU_FREQ_INFO="scaling_cur"
#
# Global variables.
#
unset INTEL_DRM_CARD_INDEX
unset GET_ACT_FREQ GET_ENF_FREQ GET_CAP_FREQ
unset SET_MIN_FREQ SET_MAX_FREQ
unset MONITOR_FREQ
unset CPU_SET_MAX_FREQ
unset DETECT_THROTT
unset DRY_RUN
#
# Simple printf based stderr logger.
#
log() {
local msg_type=$1
shift
printf "%s: %s: " "${msg_type}" "${0##*/}" >&2
printf "$@" >&2
printf "\n" >&2
}
#
# Helper to print sysfs path for the given card index and freq info.
#
# arg1: Frequency info sysfs name, one of *_FREQ_INFO constants above
# arg2: Video card index, defaults to INTEL_DRM_CARD_INDEX
#
print_freq_sysfs_path() {
printf ${DRM_FREQ_SYSFS_PATTERN} "${2:-${INTEL_DRM_CARD_INDEX}}" "$1"
}
#
# Helper to set INTEL_DRM_CARD_INDEX for the first identified Intel video card.
#
identify_intel_gpu() {
local i=0 vendor path
while [ ${i} -lt 16 ]; do
[ -c "/dev/dri/card$i" ] || {
i=$((i + 1))
continue
}
path=$(print_freq_sysfs_path "" ${i})
if [ "$USE_XE" -eq 1 ]; then
path=${path%/*/*/*/*/*}/device/vendor
else
path=${path%/*}/device/vendor
fi
[ -r "${path}" ] && read vendor < "${path}" && \
[ "${vendor}" = "0x8086" ] && INTEL_DRM_CARD_INDEX=$i && return 0
i=$((i + 1))
done
return 1
}
#
# Read the specified freq info from sysfs.
#
# arg1: Flag (y/n) to also enable printing the freq info.
# arg2...: Frequency info sysfs name(s), see *_FREQ_INFO constants above
# return: Global variable(s) FREQ_${arg} containing the requested information
#
read_freq_info() {
local var val info path print=0 ret=0
[ "$1" = "y" ] && print=1
shift
while [ $# -gt 0 ]; do
info=$1
shift
var=FREQ_${info}
path=$(print_freq_sysfs_path "${info}")
[ -r ${path} ] && read ${var} < ${path} || {
log ERROR "Failed to read freq info from: %s" "${path}"
ret=1
continue
}
[ -n "${var}" ] || {
log ERROR "Got empty freq info from: %s" "${path}"
ret=1
continue
}
[ ${print} -eq 1 ] && {
eval val=\$${var}
printf "%6s: %4s MHz\n" "${info}" "${val}"
}
done
return ${ret}
}
#
# Display requested info.
#
print_freq_info() {
local req_freq
[ -n "${GET_CAP_FREQ}" ] && {
printf "* Hardware capabilities\n"
read_freq_info y ${CAP_FREQ_INFO}
printf "\n"
}
[ -n "${GET_ENF_FREQ}" ] && {
printf "* Enforcements\n"
read_freq_info y ${ENF_FREQ_INFO}
printf "\n"
}
[ -n "${GET_ACT_FREQ}" ] && {
printf "* Actual\n"
read_freq_info y ${ACT_FREQ_INFO}
printf "\n"
}
}
#
# Helper to print frequency value as requested by user via '-s, --set' option.
# arg1: user requested freq value
#
compute_freq_set() {
local val
case "$1" in
+)
val=$(eval "echo \${FREQ_$(echo $CAP_FREQ_INFO | cut -d' ' -f1)}") # FREQ_rp0 or FREQ_RP0
;;
-)
val=$(eval "echo \${FREQ_$(echo $CAP_FREQ_INFO | cut -d' ' -f2)}") # FREQ_rpn or FREQ_RPn
;;
*%)
val=$((${1%?} * $(eval "echo \${FREQ_$(echo $CAP_FREQ_INFO | cut -d' ' -f1)}") / 100))
# Adjust freq to comply with 50 MHz increments
val=$((val / 50 * 50))
;;
*[!0-9]*)
log ERROR "Cannot set freq to invalid value: %s" "$1"
return 1
;;
"")
log ERROR "Cannot set freq to unspecified value"
return 1
;;
*)
# Adjust freq to comply with 50 MHz increments
val=$(($1 / 50 * 50))
;;
esac
printf "%s" "${val}"
}
#
# Helper for set_freq().
#
set_freq_max() {
log INFO "Setting GPU max freq to %s MHz" "${SET_MAX_FREQ}"
read_freq_info n min || return $?
# FREQ_rp0 or FREQ_RP0
[ ${SET_MAX_FREQ} -gt $(eval "echo \${FREQ_$(echo $CAP_FREQ_INFO | cut -d' ' -f1)}") ] && {
log ERROR "Cannot set GPU max freq (%s) to be greater than hw max freq (%s)" \
"${SET_MAX_FREQ}" "$(eval "echo \${FREQ_$(echo $CAP_FREQ_INFO | cut -d' ' -f1)}")"
return 1
}
# FREQ_rpn or FREQ_RPn
[ ${SET_MAX_FREQ} -lt $(eval "echo \${FREQ_$(echo $CAP_FREQ_INFO | cut -d' ' -f2)}") ] && {
log ERROR "Cannot set GPU max freq (%s) to be less than hw min freq (%s)" \
"${SET_MIN_FREQ}" "$(eval "echo \${FREQ_$(echo $CAP_FREQ_INFO | cut -d' ' -f2)}")"
return 1
}
[ ${SET_MAX_FREQ} -lt ${FREQ_min} ] && {
log ERROR "Cannot set GPU max freq (%s) to be less than min freq (%s)" \
"${SET_MAX_FREQ}" "${FREQ_min}"
return 1
}
[ -z "${DRY_RUN}" ] || return 0
# Write to max freq path
if ! printf "%s" ${SET_MAX_FREQ} | tee $(print_freq_sysfs_path max) > /dev/null;
then
log ERROR "Failed to set GPU max frequency"
return 1
fi
# Only write to boost if the sysfs file exists, as it's removed in Xe
if [ -e "$(print_freq_sysfs_path boost)" ]; then
if ! printf "%s" ${SET_MAX_FREQ} | tee $(print_freq_sysfs_path boost) > /dev/null;
then
log ERROR "Failed to set GPU boost frequency"
return 1
fi
fi
}
#
# Helper for set_freq().
#
set_freq_min() {
log INFO "Setting GPU min freq to %s MHz" "${SET_MIN_FREQ}"
read_freq_info n max || return $?
[ ${SET_MIN_FREQ} -gt ${FREQ_max} ] && {
log ERROR "Cannot set GPU min freq (%s) to be greater than max freq (%s)" \
"${SET_MIN_FREQ}" "${FREQ_max}"
return 1
}
[ ${SET_MIN_FREQ} -lt $(eval "echo \${FREQ_$(echo $CAP_FREQ_INFO | cut -d' ' -f2)}") ] && {
log ERROR "Cannot set GPU min freq (%s) to be less than hw min freq (%s)" \
"${SET_MIN_FREQ}" "$(eval "echo \${FREQ_$(echo $CAP_FREQ_INFO | cut -d' ' -f2)}")"
return 1
}
[ -z "${DRY_RUN}" ] || return 0
if ! printf "%s" ${SET_MIN_FREQ} > $(print_freq_sysfs_path min);
then
log ERROR "Failed to set GPU min frequency"
return 1
fi
}
#
# Set min or max or both GPU frequencies to the user indicated values.
#
set_freq() {
# Get hw max & min frequencies
read_freq_info n $(echo $CAP_FREQ_INFO | cut -d' ' -f1,2) || return $? # RP0 RPn
[ -z "${SET_MAX_FREQ}" ] || {
SET_MAX_FREQ=$(compute_freq_set "${SET_MAX_FREQ}")
[ -z "${SET_MAX_FREQ}" ] && return 1
}
[ -z "${SET_MIN_FREQ}" ] || {
SET_MIN_FREQ=$(compute_freq_set "${SET_MIN_FREQ}")
[ -z "${SET_MIN_FREQ}" ] && return 1
}
#
# Ensure correct operation order, to avoid setting min freq
# to a value which is larger than max freq.
#
# E.g.:
# crt_min=crt_max=600; new_min=new_max=700
# > operation order: max=700; min=700
#
# crt_min=crt_max=600; new_min=new_max=500
# > operation order: min=500; max=500
#
if [ -n "${SET_MAX_FREQ}" ] && [ -n "${SET_MIN_FREQ}" ]; then
[ ${SET_MAX_FREQ} -lt ${SET_MIN_FREQ} ] && {
log ERROR "Cannot set GPU max freq to be less than min freq"
return 1
}
read_freq_info n min || return $?
if [ ${SET_MAX_FREQ} -lt ${FREQ_min} ]; then
set_freq_min || return $?
set_freq_max
else
set_freq_max || return $?
set_freq_min
fi
elif [ -n "${SET_MAX_FREQ}" ]; then
set_freq_max
elif [ -n "${SET_MIN_FREQ}" ]; then
set_freq_min
else
log "Unexpected call to set_freq()"
return 1
fi
}
#
# Helper for detect_throttling().
#
get_thrott_detect_pid() {
[ -e ${THROTT_DETECT_PID_FILE_PATH} ] || return 0
local pid
read pid < ${THROTT_DETECT_PID_FILE_PATH} || {
log ERROR "Failed to read pid from: %s" "${THROTT_DETECT_PID_FILE_PATH}"
return 1
}
local proc_path=/proc/${pid:-invalid}/cmdline
[ -r ${proc_path} ] && grep -qs "${0##*/}" ${proc_path} && {
printf "%s" "${pid}"
return 0
}
# Remove orphaned PID file
rm -rf ${THROTT_DETECT_PID_FILE_PATH}
return 1
}
#
# Control detection and reporting of GPU throttling events.
# arg1: start - run throttle detector in background
# stop - stop throttle detector process, if any
# status - verify if throttle detector is running
#
detect_throttling() {
local pid
pid=$(get_thrott_detect_pid)
case "$1" in
status)
printf "Throttling detector is "
[ -z "${pid}" ] && printf "not running\n" && return 0
printf "running (pid=%s)\n" ${pid}
;;
stop)
[ -z "${pid}" ] && return 0
log INFO "Stopping throttling detector (pid=%s)" "${pid}"
kill ${pid}; sleep 1; kill -0 ${pid} 2>/dev/null && kill -9 ${pid}
rm -rf ${THROTT_DETECT_PID_FILE_PATH}
;;
start)
[ -n "${pid}" ] && {
log WARN "Throttling detector is already running (pid=%s)" ${pid}
return 0
}
(
read_freq_info n $(echo $CAP_FREQ_INFO | cut -d' ' -f2) || return $? # RPn
while true; do
sleep ${THROTT_DETECT_SLEEP_SEC}
read_freq_info n act min cur || exit $?
#
# The throttling seems to occur when act freq goes below min.
# However, it's necessary to exclude the idle states, where
# act freq normally reaches rpn and cur goes below min.
#
[ ${FREQ_act} -lt ${FREQ_min} ] && \
[ ${FREQ_act} -gt $(eval "echo \${FREQ_$(echo $CAP_FREQ_INFO | cut -d' ' -f2)}") ] && \
[ ${FREQ_cur} -ge ${FREQ_min} ] && \
printf "GPU throttling detected: act=%s min=%s cur=%s rpn=%s\n" \
${FREQ_act} ${FREQ_min} ${FREQ_cur} $(eval "echo \${FREQ_$(echo $CAP_FREQ_INFO | cut -d' ' -f2)}")
done
) &
pid=$!
log INFO "Started GPU throttling detector (pid=%s)" ${pid}
printf "%s\n" ${pid} > ${THROTT_DETECT_PID_FILE_PATH} || \
log WARN "Failed to write throttle detector PID file"
;;
esac
}
#
# Retrieve the list of online CPUs.
#
get_online_cpus() {
local path cpu_index
printf "0"
for path in $(grep 1 ${CPU_SYSFS_PREFIX}/cpu*/online); do
cpu_index=${path##*/cpu}
printf " %s" ${cpu_index%%/*}
done
}
#
# Helper to print sysfs path for the given CPU index and freq info.
#
# arg1: Frequency info sysfs name, one of *_CPU_FREQ_INFO constants above
# arg2: CPU index
#
print_cpu_freq_sysfs_path() {
printf ${CPU_FREQ_SYSFS_PATTERN} "$2" "$1"
}
#
# Read the specified CPU freq info from sysfs.
#
# arg1: CPU index
# arg2: Flag (y/n) to also enable printing the freq info.
# arg3...: Frequency info sysfs name(s), see *_CPU_FREQ_INFO constants above
# return: Global variable(s) CPU_FREQ_${arg} containing the requested information
#
read_cpu_freq_info() {
local var val info path cpu_index print=0 ret=0
cpu_index=$1
[ "$2" = "y" ] && print=1
shift 2
while [ $# -gt 0 ]; do
info=$1
shift
var=CPU_FREQ_${info}
path=$(print_cpu_freq_sysfs_path "${info}" ${cpu_index})
[ -r ${path} ] && read ${var} < ${path} || {
log ERROR "Failed to read CPU freq info from: %s" "${path}"
ret=1
continue
}
[ -n "${var}" ] || {
log ERROR "Got empty CPU freq info from: %s" "${path}"
ret=1
continue
}
[ ${print} -eq 1 ] && {
eval val=\$${var}
printf "%6s: %4s Hz\n" "${info}" "${val}"
}
done
return ${ret}
}
#
# Helper to print freq. value as requested by user via '--cpu-set-max' option.
# arg1: user requested freq value
#
compute_cpu_freq_set() {
local val
case "$1" in
+)
val=${CPU_FREQ_cpuinfo_max}
;;
-)
val=${CPU_FREQ_cpuinfo_min}
;;
*%)
val=$((${1%?} * CPU_FREQ_cpuinfo_max / 100))
;;
*[!0-9]*)
log ERROR "Cannot set CPU freq to invalid value: %s" "$1"
return 1
;;
"")
log ERROR "Cannot set CPU freq to unspecified value"
return 1
;;
*)
log ERROR "Cannot set CPU freq to custom value; use +, -, or % instead"
return 1
;;
esac
printf "%s" "${val}"
}
#
# Adjust CPU max scaling frequency.
#
set_cpu_freq_max() {
local target_freq res=0
case "${CPU_SET_MAX_FREQ}" in
+)
target_freq=100
;;
-)
target_freq=1
;;
*%)
target_freq=${CPU_SET_MAX_FREQ%?}
;;
*)
log ERROR "Invalid CPU freq"
return 1
;;
esac
local pstate_info=$(printf "${CPU_PSTATE_SYSFS_PATTERN}" max_perf_pct)
[ -e "${pstate_info}" ] && {
log INFO "Setting intel_pstate max perf to %s" "${target_freq}%"
if ! printf "%s" "${target_freq}" > "${pstate_info}";
then
log ERROR "Failed to set intel_pstate max perf"
res=1
fi
}
local cpu_index
for cpu_index in $(get_online_cpus); do
read_cpu_freq_info ${cpu_index} n ${CAP_CPU_FREQ_INFO} || { res=$?; continue; }
target_freq=$(compute_cpu_freq_set "${CPU_SET_MAX_FREQ}")
tf_res=$?
[ -z "${target_freq}" ] && { res=$tf_res; continue; }
log INFO "Setting CPU%s max scaling freq to %s Hz" ${cpu_index} "${target_freq}"
[ -n "${DRY_RUN}" ] && continue
if ! printf "%s" ${target_freq} > $(print_cpu_freq_sysfs_path scaling_max ${cpu_index});
then
res=1
log ERROR "Failed to set CPU%s max scaling frequency" ${cpu_index}
fi
done
return ${res}
}
#
# Show help message.
#
print_usage() {
cat <<EOF
Usage: ${0##*/} [OPTION]...
A script to manage Intel GPU frequencies. Can be used for debugging performance
problems or trying to obtain a stable frequency while benchmarking.
Note Intel GPUs only accept specific frequencies, usually multiples of 50 MHz.
Options:
-g, --get [act|enf|cap|all]
Get frequency information: active (default), enforced,
hardware capabilities or all of them.
-s, --set [{min|max}=]{FREQUENCY[%]|+|-}
Set min or max frequency to the given value (MHz).
Append '%' to interpret FREQUENCY as % of hw max.
Use '+' or '-' to set frequency to hardware max or min.
Omit min/max prefix to set both frequencies.
-r, --reset Reset frequencies to hardware defaults.
-m, --monitor [act|enf|cap|all]
Monitor the indicated frequencies via 'watch' utility.
See '-g, --get' option for more details.
-d|--detect-thrott [start|stop|status]
Start (default operation) the throttling detector
as a background process. Use 'stop' or 'status' to
terminate the detector process or verify its status.
--cpu-set-max [FREQUENCY%|+|-}
Set CPU max scaling frequency as % of hw max.
Use '+' or '-' to set frequency to hardware max or min.
-r, --reset Reset frequencies to hardware defaults.
--dry-run See what the script will do without applying any
frequency changes.
-h, --help Display this help text and exit.
EOF
}
#
# Parse user input for '-g, --get' option.
# Returns 0 if a value has been provided, otherwise 1.
#
parse_option_get() {
local ret=0
case "$1" in
act) GET_ACT_FREQ=1;;
enf) GET_ENF_FREQ=1;;
cap) GET_CAP_FREQ=1;;
all) GET_ACT_FREQ=1; GET_ENF_FREQ=1; GET_CAP_FREQ=1;;
-*|"")
# No value provided, using default.
GET_ACT_FREQ=1
ret=1
;;
*)
print_usage
exit 1
;;
esac
return ${ret}
}
#
# Validate user input for '-s, --set' option.
# arg1: input value to be validated
# arg2: optional flag indicating input is restricted to %
#
validate_option_set() {
case "$1" in
+|-|[0-9]%|[0-9][0-9]%)
return 0
;;
*[!0-9]*|"")
print_usage
exit 1
;;
esac
[ -z "$2" ] || { print_usage; exit 1; }
}
#
# Parse script arguments.
#
[ $# -eq 0 ] && { print_usage; exit 1; }
while [ $# -gt 0 ]; do
case "$1" in
-g|--get)
parse_option_get "$2" && shift
;;
-s|--set)
shift
case "$1" in
min=*)
SET_MIN_FREQ=${1#min=}
validate_option_set "${SET_MIN_FREQ}"
;;
max=*)
SET_MAX_FREQ=${1#max=}
validate_option_set "${SET_MAX_FREQ}"
;;
*)
SET_MIN_FREQ=$1
validate_option_set "${SET_MIN_FREQ}"
SET_MAX_FREQ=${SET_MIN_FREQ}
;;
esac
;;
-r|--reset)
RESET_FREQ=1
SET_MIN_FREQ="-"
SET_MAX_FREQ="+"
;;
-m|--monitor)
MONITOR_FREQ=act
parse_option_get "$2" && MONITOR_FREQ=$2 && shift
;;
-d|--detect-thrott)
DETECT_THROTT=start
case "$2" in
start|stop|status)
DETECT_THROTT=$2
shift
;;
esac
;;
--cpu-set-max)
shift
CPU_SET_MAX_FREQ=$1
validate_option_set "${CPU_SET_MAX_FREQ}" restricted
;;
--dry-run)
DRY_RUN=1
;;
-h|--help)
print_usage
exit 0
;;
*)
print_usage
exit 1
;;
esac
shift
done
#
# Main
#
RET=0
identify_intel_gpu || {
log INFO "No Intel GPU detected"
exit 0
}
[ -n "${SET_MIN_FREQ}${SET_MAX_FREQ}" ] && { set_freq || RET=$?; }
print_freq_info
[ -n "${DETECT_THROTT}" ] && detect_throttling ${DETECT_THROTT}
[ -n "${CPU_SET_MAX_FREQ}" ] && { set_cpu_freq_max || RET=$?; }
[ -n "${MONITOR_FREQ}" ] && {
log INFO "Entering frequency monitoring mode"
sleep 2
exec watch -d -n 1 "$0" -g "${MONITOR_FREQ}"
}
exit ${RET}

View File

@@ -1,18 +0,0 @@
#!/usr/bin/env bash
# shellcheck disable=SC1091 # the path is created in build-kdl and
# here is check if exist
# shellcheck disable=SC2086 # we want the arguments to be expanded
if ! [ -f /ci-kdl/bin/activate ]; then
echo -e "ci-kdl not installed; not monitoring temperature"
exit 0
fi
KDL_ARGS="
--output-file=${RESULTS_DIR}/kdl.json
--log-level=WARNING
--num-samples=-1
"
source /ci-kdl/bin/activate
exec /ci-kdl/bin/ci-kdl ${KDL_ARGS}

View File

@@ -1,7 +0,0 @@
[core]
backend=headless-backend.so
xwayland=true
idle-time=0
[xwayland]
path=/usr/local/bin/Xwayland

View File

@@ -1,7 +0,0 @@
variables:
CONDITIONAL_BUILD_ANDROID_CTS_TAG: b018634d732f438027ec58c0383615e7
CONDITIONAL_BUILD_ANGLE_TAG: f62910e55be46e37cc867d037e4a8121
CONDITIONAL_BUILD_CROSVM_TAG: 0f59350b1052bdbb28b65a832b494377
CONDITIONAL_BUILD_FLUSTER_TAG: 3bc3afd7468e106afcbfd569a85f34f9
CONDITIONAL_BUILD_PIGLIT_TAG: 827b708ab7309721395ea28cec512968
CONDITIONAL_BUILD_VKD3D_PROTON_TAG: 82cadf35246e64a8228bf759c9c19e5b

View File

@@ -1,70 +0,0 @@
# Build the CI Alpine docker images.
#
# MESA_IMAGE_TAG is the tag of the docker image used by later stage jobs. If the
# image doesn't exist yet, the container stage job generates it.
#
# In order to generate a new image, one should generally change the tag.
# While removing the image from the registry would also work, that's not
# recommended except for ephemeral images during development: Replacing
# an image after a significant amount of time might pull in newer
# versions of gcc/clang or other packages, which might break the build
# with older commits using the same tag.
#
# After merging a change resulting in generating a new image to the
# main repository, it's recommended to remove the image from the source
# repository's container registry, so that the image from the main
# repository's registry will be used there as well.
# Alpine based x86_64 build image
.alpine/x86_64_build-base:
extends:
- .fdo.container-build@alpine
- .container
variables:
FDO_DISTRIBUTION_VERSION: "3.21"
FDO_BASE_IMAGE: alpine:$FDO_DISTRIBUTION_VERSION # since cbuild ignores it
# Alpine based x86_64 build image
alpine/x86_64_build:
extends:
- .alpine/x86_64_build-base
variables:
MESA_IMAGE_TAG: &alpine-x86_64_build ${ALPINE_X86_64_BUILD_TAG}
LLVM_VERSION: &alpine-llvm_version 19
rules:
- !reference [.container, rules]
# Note: the next three lines must remain in that order, so that the rules
# in `linkcheck-docs` catch nightly pipelines before the rules in `deploy-docs`
# exclude them.
- !reference [linkcheck-docs, rules]
- !reference [deploy-docs, rules]
- !reference [test-docs, rules]
.use-alpine/x86_64_build:
tags:
- $FDO_RUNNER_JOB_PRIORITY_TAG_X86_64
extends:
- .set-image
variables:
MESA_IMAGE_PATH: "alpine/x86_64_build"
MESA_IMAGE_TAG: *alpine-x86_64_build
LLVM_VERSION: *alpine-llvm_version
needs:
- job: sanity
optional: true
- job: alpine/x86_64_build
optional: true
# Alpine based x86_64 image for LAVA SSH dockerized client
alpine/x86_64_lava_ssh_client:
extends:
- .alpine/x86_64_build-base
variables:
MESA_IMAGE_TAG: &alpine-x86_64_lava_ssh_client ${ALPINE_X86_64_LAVA_SSH_TAG}
# Alpine based x86_64 image to run LAVA jobs
alpine/x86_64_lava-trigger:
extends:
- .alpine/x86_64_build-base
variables:
MESA_IMAGE_TAG: &alpine-x86_64_lava_trigger ${ALPINE_X86_64_LAVA_TRIGGER_TAG}

View File

@@ -1,83 +0,0 @@
#!/usr/bin/env bash
# shellcheck disable=SC1091
# When changing this file, you need to bump the following
# .gitlab-ci/image-tags.yml tags:
# ALPINE_X86_64_BUILD_TAG
set -e
. .gitlab-ci/setup-test-env.sh
set -o xtrace
EPHEMERAL=(
)
DEPS=(
bash
bison
ccache
"clang${LLVM_VERSION}-dev"
clang-dev
cmake
coreutils
curl
elfutils-dev
expat-dev
flex
g++
gcc
gettext
git
glslang
graphviz
libclc-dev
libdrm-dev
libpciaccess-dev
libva-dev
linux-headers
"llvm${LLVM_VERSION}-dev"
"llvm${LLVM_VERSION}-static"
mold
musl-dev
py3-clang
py3-cparser
py3-mako
py3-packaging
py3-pip
py3-ply
py3-yaml
python3-dev
samurai
spirv-llvm-translator-dev
spirv-tools-dev
util-macros
vulkan-headers
zlib-dev
)
apk --no-cache add "${DEPS[@]}" "${EPHEMERAL[@]}"
pip3 install --break-system-packages sphinx===8.2.3 hawkmoth===0.19.0
. .gitlab-ci/container/container_pre_build.sh
. .gitlab-ci/container/install-meson.sh
EXTRA_MESON_ARGS='--prefix=/usr' \
. .gitlab-ci/container/build-wayland.sh
############### Uninstall the build software
# too many vendor binarise, just keep the ones we need
find /usr/share/clc \
\( -type f -o -type l \) \
! -name 'spirv-mesa3d-.spv' \
! -name 'spirv64-mesa3d-.spv' \
-delete
apk del "${EPHEMERAL[@]}"
. .gitlab-ci/container/container_post_build.sh

View File

@@ -1,50 +0,0 @@
#!/usr/bin/env bash
# This is a ci-templates build script to generate a container for triggering LAVA jobs.
# When changing this file, you need to bump the following
# .gitlab-ci/image-tags.yml tags:
# ALPINE_X86_64_LAVA_TRIGGER_TAG
# shellcheck disable=SC1091
set -e
. .gitlab-ci/setup-test-env.sh
set -o xtrace
uncollapsed_section_start alpine_setup "Base Alpine system setup"
# Ephemeral packages (installed for this script and removed again at the end)
EPHEMERAL=(
git
py3-pip
)
# We only need these very basic packages to run the LAVA jobs
DEPS=(
curl
python3
tar
zstd
)
apk --no-cache add "${DEPS[@]}" "${EPHEMERAL[@]}"
pip3 install --break-system-packages -r bin/ci/requirements-lava.txt
cp -Rp .gitlab-ci/lava /
cp -Rp .gitlab-ci/bin/*_logger.py /lava
cp -Rp .gitlab-ci/common/init-stage1.sh /lava
. .gitlab-ci/container/container_pre_build.sh
############### Uninstall the build software
uncollapsed_section_switch alpine_cleanup "Cleaning up base Alpine system"
apk del "${EPHEMERAL[@]}"
. .gitlab-ci/container/container_post_build.sh
section_end alpine_cleanup

View File

@@ -1,32 +0,0 @@
#!/usr/bin/env bash
# This is a ci-templates build script to generate a container for LAVA SSH client.
# shellcheck disable=SC1091
set -e
. .gitlab-ci/setup-test-env.sh
set -o xtrace
EPHEMERAL=(
)
# We only need these very basic packages to run the tests.
DEPS=(
openssh-client # for ssh
iputils # for ping
bash
curl
)
apk --no-cache add "${DEPS[@]}" "${EPHEMERAL[@]}"
. .gitlab-ci/container/container_pre_build.sh
############### Uninstall the build software
apk del "${EPHEMERAL[@]}"
. .gitlab-ci/container/container_post_build.sh

View File

@@ -1,33 +0,0 @@
#!/usr/bin/env bash
# shellcheck disable=SC2154 # arch is assigned in previous scripts
set -e
set -o xtrace
# Fetch the arm-built rootfs image and unpack it in our x86_64 container (saves
# network transfer, disk usage, and runtime on test jobs)
S3_PATH="https://${S3_HOST}/${S3_KERNEL_BUCKET}"
if curl -L --retry 3 -f --retry-delay 10 -s --head "${S3_PATH}/${FDO_UPSTREAM_REPO}/${LAVA_DISTRIBUTION_TAG}/lava-rootfs.tar.zst"; then
ARTIFACTS_URL="${S3_PATH}/${FDO_UPSTREAM_REPO}/${LAVA_DISTRIBUTION_TAG}"
else
ARTIFACTS_URL="${S3_PATH}/${CI_PROJECT_PATH}/${LAVA_DISTRIBUTION_TAG}"
fi
curl -L --retry 4 -f --retry-all-errors --retry-delay 60 \
"${ARTIFACTS_URL}"/lava-rootfs.tar.zst -o rootfs.tar.zst
mkdir -p /rootfs-"$arch"
tar -C /rootfs-"$arch" '--exclude=./dev/*' --zstd -xf rootfs.tar.zst
rm rootfs.tar.zst
if [[ $arch == "arm64" ]]; then
mkdir -p /baremetal-files
pushd /baremetal-files
curl -L --retry 4 -f --retry-all-errors --retry-delay 60 \
-O "${KERNEL_IMAGE_BASE}"/arm64/Image
curl -L --retry 4 -f --retry-all-errors --retry-delay 60 \
-O "${KERNEL_IMAGE_BASE}"/arm64/Image.gz
popd
fi

View File

@@ -1,67 +0,0 @@
#!/usr/bin/env bash
#
# When changing this file, you need to bump the following
# .gitlab-ci/image-tags.yml tags:
# DEBIAN_TEST_ANDROID_TAG
# This script runs in a container to:
# 1. Download the Android CTS (Compatibility Test Suite)
# 2. Filter out unneeded test modules
# 3. Compress and upload the stripped version to S3
# Note: The 'build-' prefix in the filename is only to make it compatible
# with the bin/ci/update_tag.py script.
set -euo pipefail
section_start android-cts "Downloading Android CTS"
# xtrace is getting lost with the section switching
set -x
# Do a very early check to make sure the tag is correct without the need of
# setting up the environment variables locally
ci_tag_build_time_check "ANDROID_CTS_TAG"
# List of all CTS modules we might want to run in CI
# This should be the union of all modules required by our CI jobs
# Specific modules to run are selected via the ${GPU_VERSION}-android-cts-include.txt files
ANDROID_CTS_MODULES=(
"CtsDeqpTestCases"
"CtsGraphicsTestCases"
"CtsNativeHardwareTestCases"
"CtsSkQPTestCases"
)
ANDROID_CTS_VERSION="${ANDROID_VERSION}_r1"
ANDROID_CTS_DEVICE_ARCH="x86"
# Download the stripped CTS from S3, because the CTS download from Google can take 20 minutes
CTS_FILENAME="android-cts-${ANDROID_CTS_VERSION}-linux_x86-${ANDROID_CTS_DEVICE_ARCH}"
ARTIFACT_PATH="${DATA_STORAGE_PATH}/android-cts/${ANDROID_CTS_TAG}.tar.zst"
if FOUND_ARTIFACT_URL="$(find_s3_project_artifact "${ARTIFACT_PATH}")"; then
echo "Found Android CTS at: ${FOUND_ARTIFACT_URL}"
curl-with-retry "${FOUND_ARTIFACT_URL}" | tar --zstd -x -C /
else
echo "No cached CTS found, downloading from Google and uploading to S3..."
curl-with-retry --remote-name "https://dl.google.com/dl/android/cts/${CTS_FILENAME}.zip"
# Disable zipbomb detection, because the CTS zip file is too big
# At least locally, it is detected as a zipbomb
UNZIP_DISABLE_ZIPBOMB_DETECTION=true \
unzip -q -d / "${CTS_FILENAME}.zip"
rm "${CTS_FILENAME}.zip"
# Keep only the interesting tests to save space
# shellcheck disable=SC2086 # we want word splitting
ANDROID_CTS_MODULES_KEEP_EXPRESSION=$(printf "%s|" "${ANDROID_CTS_MODULES[@]}" | sed -e 's/|$//g')
find /android-cts/testcases/ -mindepth 1 -type d | grep -v -E "$ANDROID_CTS_MODULES_KEEP_EXPRESSION" | xargs rm -rf
# Using zstd compressed tarball instead of zip, the compression ratio is almost the same, but
# the extraction is faster, also LAVA overlays don't support zip compression.
tar --zstd -cf "${CTS_FILENAME}.tar.zst" /android-cts
ci-fairy s3cp --token-file "${S3_JWT_FILE}" "${CTS_FILENAME}.tar.zst" \
"https://${S3_BASE_PATH}/${CI_PROJECT_PATH}/${ARTIFACT_PATH}"
fi
section_end android-cts

View File

@@ -1,121 +0,0 @@
#!/usr/bin/env bash
# When changing this file, you need to bump the following
# .gitlab-ci/image-tags.yml and .gitlab-ci/container/gitlab-ci.yml tags:
# DEBIAN_BUILD_TAG
# ANDROID_LLVM_ARTIFACT_NAME
set -exu
# If CI vars are not set, assign an empty value, this prevents -u to fail
: "${CI:=}"
: "${CI_PROJECT_PATH:=}"
# Early check for required env variables, relies on `set -u`
: "$ANDROID_NDK_VERSION"
: "$ANDROID_SDK_VERSION"
: "$ANDROID_LLVM_VERSION"
: "$ANDROID_LLVM_ARTIFACT_NAME"
: "$S3_JWT_FILE"
: "$S3_HOST"
: "$S3_ANDROID_BUCKET"
# Check for CI if the auth file used later on is non-empty
if [ -n "$CI" ] && [ ! -s "${S3_JWT_FILE}" ]; then
echo "Error: ${S3_JWT_FILE} is empty." 1>&2
exit 1
fi
if curl -s -o /dev/null -I -L -f --retry 4 --retry-delay 15 "https://${S3_HOST}/${S3_ANDROID_BUCKET}/${CI_PROJECT_PATH}/${ANDROID_LLVM_ARTIFACT_NAME}.tar.zst"; then
echo "Artifact ${ANDROID_LLVM_ARTIFACT_NAME}.tar.zst already exists, skip re-building."
# Download prebuilt LLVM libraries for Android when they have not changed,
# to save some time
curl -L --retry 4 -f --retry-all-errors --retry-delay 60 \
-o "/${ANDROID_LLVM_ARTIFACT_NAME}.tar.zst" "https://${S3_HOST}/${S3_ANDROID_BUCKET}/${CI_PROJECT_PATH}/${ANDROID_LLVM_ARTIFACT_NAME}.tar.zst"
tar -C / --zstd -xf "/${ANDROID_LLVM_ARTIFACT_NAME}.tar.zst"
rm "/${ANDROID_LLVM_ARTIFACT_NAME}.tar.zst"
exit
fi
# Ephemeral packages (installed for this script and removed again at the end)
EPHEMERAL=(
unzip
)
apt-get update
apt-get install -y --no-install-recommends --no-remove "${EPHEMERAL[@]}"
ANDROID_NDK="android-ndk-${ANDROID_NDK_VERSION}"
ANDROID_NDK_ROOT="/${ANDROID_NDK}"
if [ ! -d "$ANDROID_NDK_ROOT" ];
then
curl -L --retry 4 -f --retry-all-errors --retry-delay 60 \
-o "${ANDROID_NDK}.zip" \
"https://dl.google.com/android/repository/${ANDROID_NDK}-linux.zip"
unzip -d / "${ANDROID_NDK}.zip" "$ANDROID_NDK/source.properties" "$ANDROID_NDK/build/cmake/*" "$ANDROID_NDK/toolchains/llvm/*"
rm "${ANDROID_NDK}.zip"
fi
if [ ! -d "/llvm-project" ];
then
mkdir "/llvm-project"
pushd "/llvm-project"
git init
git remote add origin https://github.com/llvm/llvm-project.git
git fetch --depth 1 origin "$ANDROID_LLVM_VERSION"
git checkout FETCH_HEAD
popd
fi
pushd "/llvm-project"
# Checkout again the intended version, just in case of a pre-existing full clone
git checkout "$ANDROID_LLVM_VERSION" || true
LLVM_INSTALL_PREFIX="/${ANDROID_LLVM_ARTIFACT_NAME}"
rm -rf build/
cmake -GNinja -S llvm -B build/ \
-DCMAKE_TOOLCHAIN_FILE="${ANDROID_NDK_ROOT}/build/cmake/android.toolchain.cmake" \
-DANDROID_ABI=x86_64 \
-DANDROID_PLATFORM="android-${ANDROID_SDK_VERSION}" \
-DANDROID_NDK="${ANDROID_NDK_ROOT}" \
-DCMAKE_ANDROID_ARCH_ABI=x86_64 \
-DCMAKE_ANDROID_NDK="${ANDROID_NDK_ROOT}" \
-DCMAKE_BUILD_TYPE=MinSizeRel \
-DCMAKE_SYSTEM_NAME=Android \
-DCMAKE_SYSTEM_VERSION="${ANDROID_SDK_VERSION}" \
-DCMAKE_INSTALL_PREFIX="${LLVM_INSTALL_PREFIX}" \
-DCMAKE_CXX_FLAGS="-march=x86-64 --target=x86_64-linux-android${ANDROID_SDK_VERSION} -fno-rtti" \
-DLLVM_HOST_TRIPLE="x86_64-linux-android${ANDROID_SDK_VERSION}" \
-DLLVM_TARGETS_TO_BUILD=X86 \
-DLLVM_BUILD_LLVM_DYLIB=OFF \
-DLLVM_BUILD_TESTS=OFF \
-DLLVM_BUILD_EXAMPLES=OFF \
-DLLVM_BUILD_DOCS=OFF \
-DLLVM_BUILD_TOOLS=OFF \
-DLLVM_ENABLE_RTTI=OFF \
-DLLVM_BUILD_INSTRUMENTED_COVERAGE=OFF \
-DLLVM_NATIVE_TOOL_DIR="${ANDROID_NDK_ROOT}/toolchains/llvm/prebuilt/linux-x86_64/bin" \
-DLLVM_ENABLE_PIC=False \
-DLLVM_OPTIMIZED_TABLEGEN=ON
ninja "-j${FDO_CI_CONCURRENT:-4}" -C build/ install
popd
rm -rf /llvm-project
tar --zstd -cf "${ANDROID_LLVM_ARTIFACT_NAME}.tar.zst" "$LLVM_INSTALL_PREFIX"
# If run in CI upload the tar.zst archive to S3 to avoid rebuilding it if the
# version does not change, and delete it.
# The file is not deleted for non-CI because it can be useful in local runs.
if [ -n "$CI" ]; then
ci-fairy s3cp --token-file "${S3_JWT_FILE}" "${ANDROID_LLVM_ARTIFACT_NAME}.tar.zst" "https://${S3_HOST}/${S3_ANDROID_BUCKET}/${CI_PROJECT_PATH}/${ANDROID_LLVM_ARTIFACT_NAME}.tar.zst"
rm "${ANDROID_LLVM_ARTIFACT_NAME}.tar.zst"
fi
apt-get purge -y "${EPHEMERAL[@]}"

View File

@@ -1,171 +0,0 @@
#!/usr/bin/env bash
# When changing this file, you need to bump the following
# .gitlab-ci/image-tags.yml tags:
# DEBIAN_TEST_ANDROID_TAG
# DEBIAN_TEST_GL_TAG
set -uex
section_start angle "Building ANGLE"
# Do a very early check to make sure the tag is correct without the need of
# setting up the environment variables locally
ci_tag_build_time_check "ANGLE_TAG"
ANGLE_REV="c39f4a5c553cbee39af8f866aa82a9ffa4f02f5b"
DEPOT_REV="5982a1aeb33dc36382ed8c62eddf52a6135e7dd3"
# Set ANGLE_ARCH based on DEBIAN_ARCH if it hasn't been explicitly defined
if [[ -z "${ANGLE_ARCH:-}" ]]; then
case "$DEBIAN_ARCH" in
amd64) ANGLE_ARCH=x64;;
arm64) ANGLE_ARCH=arm64;;
esac
fi
# DEPOT tools
mkdir /depot-tools
pushd /depot-tools
git init
git remote add origin https://chromium.googlesource.com/chromium/tools/depot_tools.git
git fetch --depth 1 origin "$DEPOT_REV"
git checkout FETCH_HEAD
export PATH=/depot-tools:$PATH
export DEPOT_TOOLS_UPDATE=0
popd
mkdir /angle-build
mkdir /angle
pushd /angle-build
git init
git remote add origin https://chromium.googlesource.com/angle/angle.git
git fetch --depth 1 origin "$ANGLE_REV"
git checkout FETCH_HEAD
echo "$ANGLE_REV" > /angle/version
GCLIENT_CUSTOM_VARS=()
GCLIENT_CUSTOM_VARS+=('--custom-var=angle_enable_cl=False')
GCLIENT_CUSTOM_VARS+=('--custom-var=angle_enable_cl_testing=False')
GCLIENT_CUSTOM_VARS+=('--custom-var=angle_enable_vulkan_validation_layers=False')
GCLIENT_CUSTOM_VARS+=('--custom-var=angle_enable_wgpu=False')
GCLIENT_CUSTOM_VARS+=('--custom-var=build_angle_deqp_tests=False')
GCLIENT_CUSTOM_VARS+=('--custom-var=build_angle_perftests=False')
if [[ "$ANGLE_TARGET" == "android" ]]; then
GCLIENT_CUSTOM_VARS+=('--custom-var=checkout_android=True')
fi
# source preparation
gclient config --name REPLACE-WITH-A-DOT --unmanaged \
"${GCLIENT_CUSTOM_VARS[@]}" \
https://chromium.googlesource.com/angle/angle.git
sed -e 's/REPLACE-WITH-A-DOT/./;' -i .gclient
sed -e 's|"custom_deps" : {|"custom_deps" : {\
"third_party/clspv/src": None,\
"third_party/dawn": None,\
"third_party/glmark2/src": None,\
"third_party/libjpeg_turbo": None,\
"third_party/llvm/src": None,\
"third_party/OpenCL-CTS/src": None,\
"third_party/SwiftShader": None,\
"third_party/VK-GL-CTS/src": None,\
"third_party/vulkan-validation-layers/src": None,|' -i .gclient
gclient sync --no-history -j"${FDO_CI_CONCURRENT:-4}"
mkdir -p out/Release
cat > out/Release/args.gn <<EOF
angle_assert_always_on=false
angle_build_all=false
angle_build_tests=false
angle_enable_cl=false
angle_enable_cl_testing=false
angle_enable_gl=false
angle_enable_gl_desktop_backend=false
angle_enable_null=false
angle_enable_swiftshader=false
angle_enable_trace=false
angle_enable_wgpu=false
angle_enable_vulkan=true
angle_enable_vulkan_api_dump_layer=false
angle_enable_vulkan_validation_layers=false
angle_has_frame_capture=false
angle_has_histograms=false
angle_has_rapidjson=false
angle_use_custom_libvulkan=false
build_angle_deqp_tests=false
dcheck_always_on=true
enable_expensive_dchecks=false
is_component_build=false
is_debug=false
target_cpu="${ANGLE_ARCH}"
target_os="${ANGLE_TARGET}"
treat_warnings_as_errors=false
EOF
case "$ANGLE_TARGET" in
linux) cat >> out/Release/args.gn <<EOF
angle_egl_extension="so.1"
angle_glesv2_extension="so.2"
use_custom_libcxx=false
custom_toolchain="//build/toolchain/linux/unbundle:default"
host_toolchain="//build/toolchain/linux/unbundle:default"
EOF
;;
android) cat >> out/Release/args.gn <<EOF
android_ndk_version="${ANDROID_NDK_VERSION}"
android64_ndk_api_level=${ANDROID_SDK_VERSION}
android32_ndk_api_level=${ANDROID_SDK_VERSION}
use_custom_libcxx=true
EOF
;;
*) echo "Unexpected ANGLE_TARGET value: $ANGLE_TARGET"; exit 1;;
esac
if [[ "$DEBIAN_ARCH" = "arm64" ]]; then
# We need to get an AArch64 sysroot - because ANGLE isn't great friends with
# system dependencies - but use the default system toolchain, because the
# 'arm64' toolchain you get from Google infrastructure is a cross-compiler
# from x86-64
build/linux/sysroot_scripts/install-sysroot.py --arch=arm64
fi
(
# The 'unbundled' toolchain configuration requires clang, and it also needs to
# be configured via environment variables.
export CC="clang-${LLVM_VERSION}"
export HOST_CC="$CC"
export CFLAGS="-Wno-unknown-warning-option"
export HOST_CFLAGS="$CFLAGS"
export CXX="clang++-${LLVM_VERSION}"
export HOST_CXX="$CXX"
export CXXFLAGS="-Wno-unknown-warning-option"
export HOST_CXXFLAGS="$CXXFLAGS"
export AR="ar"
export HOST_AR="$AR"
export NM="nm"
export HOST_NM="$NM"
export LDFLAGS="-fuse-ld=lld-${LLVM_VERSION} -lpthread -ldl"
export HOST_LDFLAGS="$LDFLAGS"
gn gen out/Release
# depot_tools overrides ninja with a version that doesn't work. We want
# ninja with FDO_CI_CONCURRENT anyway.
/usr/local/bin/ninja -C out/Release/ libEGL libGLESv1_CM libGLESv2
)
rm -f out/Release/libvulkan.so* out/Release/*.so*.TOC
cp out/Release/lib*.so* /angle/
if [[ "$ANGLE_TARGET" == "linux" ]]; then
ln -s libEGL.so.1 /angle/libEGL.so
ln -s libGLESv2.so.2 /angle/libGLESv2.so
fi
rm -rf out
popd
rm -rf /depot-tools
rm -rf /angle-build
section_end angle

View File

@@ -1,27 +0,0 @@
#!/usr/bin/env bash
# shellcheck disable=SC2086 # we want word splitting
# When changing this file, you need to bump the following
# .gitlab-ci/image-tags.yml tags:
# DEBIAN_BASE_TAG
set -uex
uncollapsed_section_start apitrace "Building apitrace"
APITRACE_VERSION="b6102d10960c9f43b1b473903fc67937dd19fb98"
git clone https://github.com/apitrace/apitrace.git --single-branch --no-checkout /apitrace
pushd /apitrace
git checkout "$APITRACE_VERSION"
git submodule update --init --depth 1 --recursive
cmake -S . -B _build -G Ninja -DCMAKE_BUILD_TYPE=Release -DENABLE_GUI=False -DENABLE_WAFFLE=on ${EXTRA_CMAKE_ARGS:-}
cmake --build _build --parallel --target apitrace eglretrace
mkdir build
cp _build/apitrace build
cp _build/eglretrace build
${STRIP_CMD:-strip} build/*
find . -not -path './build' -not -path './build/*' -delete
popd
section_end apitrace

View File

@@ -1,28 +0,0 @@
#!/usr/bin/env bash
# shellcheck disable=SC2086 # we want word splitting
# When changing this file, you need to bump the following
# .gitlab-ci/image-tags.yml tags:
# DEBIAN_BUILD_TAG
# FEDORA_X86_64_BUILD_TAG
uncollapsed_section_start bindgen "Building bindgen"
BINDGEN_VER=0.71.1
CBINDGEN_VER=0.26.0
# bindgen
RUSTFLAGS='-L native=/usr/local/lib' cargo install \
bindgen-cli --version ${BINDGEN_VER} \
--locked \
-j ${FDO_CI_CONCURRENT:-4} \
--root /usr/local
# cbindgen
RUSTFLAGS='-L native=/usr/local/lib' cargo install \
cbindgen --version ${CBINDGEN_VER} \
--locked \
-j ${FDO_CI_CONCURRENT:-4} \
--root /usr/local
section_end bindgen

View File

@@ -1,56 +0,0 @@
#!/usr/bin/env bash
# shellcheck disable=SC2086 # we want word splitting
# When changing this file, you need to bump the following
# .gitlab-ci/image-tags.yml tags:
# DEBIAN_BASE_TAG
# Do a very early check to make sure the tag is correct without the need of
# setting up the environment variables locally
ci_tag_build_time_check "CROSVM_TAG"
set -uex
section_start crosvm "Building crosvm"
git config --global user.email "mesa@example.com"
git config --global user.name "Mesa CI"
CROSVM_VERSION=4a6b4316155742fbfa1be7087c2ee578cfee884d
git clone --single-branch -b main --no-checkout https://chromium.googlesource.com/crosvm/crosvm /platform/crosvm
pushd /platform/crosvm
git checkout "$CROSVM_VERSION"
git submodule update --init
VIRGLRENDERER_VERSION=06d43ce974b664f9dc521b706a0ad7f91dbf2866
rm -rf third_party/virglrenderer
git clone --single-branch -b main --no-checkout https://gitlab.freedesktop.org/virgl/virglrenderer.git third_party/virglrenderer
pushd third_party/virglrenderer
git checkout "$VIRGLRENDERER_VERSION"
meson setup build/ -D libdir=lib -D render-server-worker=process -D venus=true ${EXTRA_MESON_ARGS:-}
meson install -C build
popd
rm rust-toolchain
RUSTFLAGS='-L native=/usr/local/lib' cargo install \
bindgen-cli \
--locked \
-j ${FDO_CI_CONCURRENT:-4} \
--root /usr/local \
--version 0.71.1 \
${EXTRA_CARGO_ARGS:-}
CROSVM_USE_SYSTEM_MINIGBM=1 CROSVM_USE_SYSTEM_VIRGLRENDERER=1 RUSTFLAGS='-L native=/usr/local/lib' cargo install \
-j ${FDO_CI_CONCURRENT:-4} \
--locked \
--features 'default-no-sandbox gpu x virgl_renderer' \
--path . \
--root /usr/local \
${EXTRA_CARGO_ARGS:-}
popd
rm -rf /platform/crosvm
section_end crosvm

View File

@@ -1,99 +0,0 @@
#!/usr/bin/env bash
# shellcheck disable=SC2086 # we want word splitting
# When changing this file, you need to bump the following
# .gitlab-ci/image-tags.yml tags:
# DEBIAN_TEST_ANDROID_TAG
# DEBIAN_BASE_TAG
set -uex
section_start deqp-runner "Building deqp-runner"
DEQP_RUNNER_VERSION=0.20.3
commits_to_backport=(
)
patch_files=(
)
DEQP_RUNNER_GIT_URL="${DEQP_RUNNER_GIT_URL:-https://gitlab.freedesktop.org/mesa/deqp-runner.git}"
if [ -n "${DEQP_RUNNER_GIT_TAG:-}" ]; then
DEQP_RUNNER_GIT_CHECKOUT="$DEQP_RUNNER_GIT_TAG"
elif [ -n "${DEQP_RUNNER_GIT_REV:-}" ]; then
DEQP_RUNNER_GIT_CHECKOUT="$DEQP_RUNNER_GIT_REV"
else
DEQP_RUNNER_GIT_CHECKOUT="v$DEQP_RUNNER_VERSION"
fi
BASE_PWD=$PWD
mkdir -p /deqp-runner
pushd /deqp-runner
mkdir deqp-runner-git
pushd deqp-runner-git
git init
git remote add origin "$DEQP_RUNNER_GIT_URL"
git fetch --depth 1 origin "$DEQP_RUNNER_GIT_CHECKOUT"
git checkout FETCH_HEAD
for commit in "${commits_to_backport[@]}"
do
PATCH_URL="https://gitlab.freedesktop.org/mesa/deqp-runner/-/commit/$commit.patch"
echo "Backport deqp-runner commit $commit from $PATCH_URL"
curl -L --retry 4 -f --retry-all-errors --retry-delay 60 $PATCH_URL | git am
done
for patch in "${patch_files[@]}"
do
echo "Apply patch to deqp-runner from $patch"
git am "$BASE_PWD/.gitlab-ci/container/patches/$patch"
done
if [ -z "${RUST_TARGET:-}" ]; then
RUST_TARGET=""
fi
if [[ "$RUST_TARGET" != *-android ]]; then
# When CC (/usr/lib/ccache/gcc) variable is set, the rust compiler uses
# this variable when cross-compiling arm32 and build fails for zsys-sys.
# So unset the CC variable when cross-compiling for arm32.
SAVEDCC=${CC:-}
if [ "$RUST_TARGET" = "armv7-unknown-linux-gnueabihf" ]; then
unset CC
fi
cargo install --locked \
-j ${FDO_CI_CONCURRENT:-4} \
--root /usr/local \
${EXTRA_CARGO_ARGS:-} \
--path .
CC=$SAVEDCC
else
cargo install --locked \
-j ${FDO_CI_CONCURRENT:-4} \
--root /usr/local --version 2.10.0 \
cargo-ndk
rustup target add $RUST_TARGET
RUSTFLAGS='-C target-feature=+crt-static' cargo ndk --target $RUST_TARGET build --release
mv target/$RUST_TARGET/release/deqp-runner /deqp-runner
cargo uninstall --locked \
--root /usr/local \
cargo-ndk
fi
popd
rm -rf deqp-runner-git
popd
# remove unused test runners to shrink images for the Mesa CI build (not kernel,
# which chooses its own deqp branch)
if [ -z "${DEQP_RUNNER_GIT_TAG:-}${DEQP_RUNNER_GIT_REV:-}" ]; then
rm -f /usr/local/bin/igt-runner
fi
section_end deqp-runner

View File

@@ -1,314 +0,0 @@
#!/usr/bin/env bash
# shellcheck disable=SC2086 # we want word splitting
# When changing this file, you need to bump the following
# .gitlab-ci/image-tags.yml tags:
# DEBIAN_TEST_ANDROID_TAG
# DEBIAN_TEST_GL_TAG
# DEBIAN_TEST_VK_TAG
set -ue -o pipefail
# shellcheck disable=SC2153
deqp_api=${DEQP_API,,}
section_start deqp-$deqp_api "Building dEQP $DEQP_API"
set -x
# See `deqp_build_targets` below for which release is used to produce which
# binary. Unless this comment has bitrotten:
# - the commit from the main branch produces the deqp tools and `deqp-vk`,
# - the VK release produces `deqp-vk`,
# - the GL release produces `glcts`, and
# - the GLES release produces `deqp-gles*` and `deqp-egl`
DEQP_MAIN_COMMIT=9cc8e038994c32534b3d2c4ba88c1dc49ef53228
DEQP_VK_VERSION=1.4.1.1
DEQP_GL_VERSION=4.6.6.0
DEQP_GLES_VERSION=3.2.12.0
# Patches to VulkanCTS may come from commits in their repo (listed in
# cts_commits_to_backport) or patch files stored in our repo (in the patch
# directory `$OLDPWD/.gitlab-ci/container/patches/` listed in cts_patch_files).
# Both list variables would have comments explaining the reasons behind the
# patches.
# shellcheck disable=SC2034
main_cts_commits_to_backport=(
# If you find yourself wanting to add something in here, consider whether
# bumping DEQP_MAIN_COMMIT is not a better solution :)
)
# shellcheck disable=SC2034
main_cts_patch_files=(
)
# shellcheck disable=SC2034
vk_cts_commits_to_backport=(
# Stop querying device address from unbound buffers
046343f46f7d39d53b47842d7fd8ed3279528046
)
# shellcheck disable=SC2034
vk_cts_patch_files=(
)
# shellcheck disable=SC2034
gl_cts_commits_to_backport=(
# Add testing for GL_PRIMITIVES_SUBMITTED_ARB query.
e075ce73ddc5973aa46a5236c715bb281c9501fa
)
# shellcheck disable=SC2034
gl_cts_patch_files=(
build-deqp-gl_Build-Don-t-build-Vulkan-utilities-for-GL-builds.patch
build-deqp-gl_Revert-Add-missing-context-deletion.patch
build-deqp-gl_Revert-Fix-issues-with-GLX-reset-notification-strate.patch
build-deqp-gl_Revert-Fix-spurious-failures-when-using-a-config-wit.patch
)
# shellcheck disable=SC2034
# GLES builds also EGL
gles_cts_commits_to_backport=(
)
# shellcheck disable=SC2034
gles_cts_patch_files=(
build-deqp-gl_Build-Don-t-build-Vulkan-utilities-for-GL-builds.patch
build-deqp-gl_Revert-Add-missing-context-deletion.patch
build-deqp-gl_Revert-Fix-issues-with-GLX-reset-notification-strate.patch
build-deqp-gl_Revert-Fix-spurious-failures-when-using-a-config-wit.patch
)
### Careful editing anything below this line
git config --global user.email "mesa@example.com"
git config --global user.name "Mesa CI"
# shellcheck disable=SC2153
case "${DEQP_API}" in
tools) DEQP_VERSION="$DEQP_MAIN_COMMIT";;
*-main) DEQP_VERSION="$DEQP_MAIN_COMMIT";;
VK) DEQP_VERSION="vulkan-cts-$DEQP_VK_VERSION";;
GL) DEQP_VERSION="opengl-cts-$DEQP_GL_VERSION";;
GLES) DEQP_VERSION="opengl-es-cts-$DEQP_GLES_VERSION";;
*) echo "Unexpected DEQP_API value: $DEQP_API"; exit 1;;
esac
mkdir -p /VK-GL-CTS
pushd /VK-GL-CTS
[ -e .git ] || {
git init
git remote add origin https://github.com/KhronosGroup/VK-GL-CTS.git
}
git fetch --depth 1 origin "$DEQP_VERSION"
git checkout FETCH_HEAD
DEQP_COMMIT=$(git rev-parse FETCH_HEAD)
if [ "$DEQP_VERSION" = "$DEQP_MAIN_COMMIT" ]; then
merge_base="$(curl-with-retry -s https://api.github.com/repos/KhronosGroup/VK-GL-CTS/compare/main...$DEQP_MAIN_COMMIT | jq -r .merge_base_commit.sha)"
if [[ "$merge_base" != "$DEQP_MAIN_COMMIT" ]]; then
echo "VK-GL-CTS commit $DEQP_MAIN_COMMIT is not a commit from the main branch."
exit 1
fi
fi
mkdir -p /deqp-$deqp_api
if [ "$DEQP_VERSION" = "$DEQP_MAIN_COMMIT" ]; then
prefix="main"
else
prefix="$deqp_api"
fi
cts_commits_to_backport="${prefix}_cts_commits_to_backport[@]"
for commit in "${!cts_commits_to_backport}"
do
PATCH_URL="https://github.com/KhronosGroup/VK-GL-CTS/commit/$commit.patch"
echo "Apply patch to ${DEQP_API} CTS from $PATCH_URL"
curl-with-retry $PATCH_URL | GIT_COMMITTER_DATE=$(LC_TIME=C date -d@0) git am -
done
cts_patch_files="${prefix}_cts_patch_files[@]"
for patch in "${!cts_patch_files}"
do
echo "Apply patch to ${DEQP_API} CTS from $patch"
GIT_COMMITTER_DATE=$(LC_TIME=C date -d@0) git am < $OLDPWD/.gitlab-ci/container/patches/$patch
done
{
if [ "$DEQP_VERSION" = "$DEQP_MAIN_COMMIT" ]; then
commit_desc=$(git show --no-patch --format='commit %h on %ci' --abbrev=10 "$DEQP_COMMIT")
echo "dEQP $DEQP_API at $commit_desc"
else
echo "dEQP $DEQP_API version $DEQP_VERSION"
fi
if [ "$(git rev-parse HEAD)" != "$DEQP_COMMIT" ]; then
echo "The following local patches are applied on top:"
git log --reverse --oneline "$DEQP_COMMIT".. --format='- %s'
fi
} > /deqp-$deqp_api/deqp-$deqp_api-version
# --insecure is due to SSL cert failures hitting sourceforge for zlib and
# libpng (sigh). The archives get their checksums checked anyway, and git
# always goes through ssh or https.
python3 external/fetch_sources.py --insecure
case "${DEQP_API}" in
VK-main)
# Video tests rely on external files
python3 external/fetch_video_decode_samples.py
python3 external/fetch_video_encode_samples.py
;;
esac
if [[ "$DEQP_API" = tools ]]; then
# Save the testlog stylesheets:
cp doc/testlog-stylesheet/testlog.{css,xsl} /deqp-$deqp_api
fi
popd
deqp_build_targets=()
case "${DEQP_API}" in
VK|VK-main)
deqp_build_targets+=(deqp-vk)
;;
GL)
deqp_build_targets+=(glcts)
;;
GLES)
deqp_build_targets+=(deqp-gles{2,3,31})
deqp_build_targets+=(glcts) # needed for gles*-khr tests
# deqp-egl also comes from this build, but it is handled separately below.
;;
tools)
deqp_build_targets+=(testlog-to-xml)
deqp_build_targets+=(testlog-to-csv)
deqp_build_targets+=(testlog-to-junit)
;;
esac
OLD_IFS="$IFS"
IFS=";"
CMAKE_SBT="${deqp_build_targets[*]}"
IFS="$OLD_IFS"
pushd /deqp-$deqp_api
if [ "${DEQP_API}" = 'GLES' ]; then
if [ "${DEQP_TARGET}" = 'android' ]; then
cmake -S /VK-GL-CTS -B . -G Ninja \
-DDEQP_TARGET=android \
-DCMAKE_BUILD_TYPE=Release \
-DSELECTED_BUILD_TARGETS="deqp-egl" \
${EXTRA_CMAKE_ARGS:-}
ninja modules/egl/deqp-egl
mv modules/egl/deqp-egl{,-android}
else
# When including EGL/X11 testing, do that build first and save off its
# deqp-egl binary.
cmake -S /VK-GL-CTS -B . -G Ninja \
-DDEQP_TARGET=x11_egl_glx \
-DCMAKE_BUILD_TYPE=Release \
-DSELECTED_BUILD_TARGETS="deqp-egl" \
${EXTRA_CMAKE_ARGS:-}
ninja modules/egl/deqp-egl
mv modules/egl/deqp-egl{,-x11}
cmake -S /VK-GL-CTS -B . -G Ninja \
-DDEQP_TARGET=wayland \
-DCMAKE_BUILD_TYPE=Release \
-DSELECTED_BUILD_TARGETS="deqp-egl" \
${EXTRA_CMAKE_ARGS:-}
ninja modules/egl/deqp-egl
mv modules/egl/deqp-egl{,-wayland}
fi
fi
cmake -S /VK-GL-CTS -B . -G Ninja \
-DDEQP_TARGET=${DEQP_TARGET} \
-DCMAKE_BUILD_TYPE=Release \
-DSELECTED_BUILD_TARGETS="${CMAKE_SBT}" \
${EXTRA_CMAKE_ARGS:-}
# Make sure `default` doesn't silently stop detecting one of the platforms we care about
if [ "${DEQP_TARGET}" = 'default' ]; then
grep -q DEQP_SUPPORT_WAYLAND=1 build.ninja
grep -q DEQP_SUPPORT_X11=1 build.ninja
grep -q DEQP_SUPPORT_XCB=1 build.ninja
fi
ninja "${deqp_build_targets[@]}"
if [ "$DEQP_API" != tools ]; then
# Copy out the mustpass lists we want.
mkdir -p mustpass
if [ "${DEQP_API}" = 'VK' ] || [ "${DEQP_API}" = 'VK-main' ]; then
for mustpass in $(< /VK-GL-CTS/external/vulkancts/mustpass/main/vk-default.txt) ; do
cat /VK-GL-CTS/external/vulkancts/mustpass/main/$mustpass \
>> mustpass/vk-main.txt
done
fi
if [ "${DEQP_API}" = 'GL' ]; then
cp \
/VK-GL-CTS/external/openglcts/data/gl_cts/data/mustpass/gl/khronos_mustpass/main/*-main.txt \
mustpass/
cp \
/VK-GL-CTS/external/openglcts/data/gl_cts/data/mustpass/gl/khronos_mustpass_single/main/*-single.txt \
mustpass/
fi
if [ "${DEQP_API}" = 'GLES' ]; then
cp \
/VK-GL-CTS/external/openglcts/data/gl_cts/data/mustpass/gles/aosp_mustpass/main/*.txt \
mustpass/
cp \
/VK-GL-CTS/external/openglcts/data/gl_cts/data/mustpass/egl/aosp_mustpass/main/egl-main.txt \
mustpass/
cp \
/VK-GL-CTS/external/openglcts/data/gl_cts/data/mustpass/gles/khronos_mustpass/main/*-main.txt \
mustpass/
fi
# Compress the caselists, since Vulkan's in particular are gigantic; higher
# compression levels provide no real measurable benefit.
zstd -f -1 --rm mustpass/*.txt
fi
if [ "$DEQP_API" = tools ]; then
# Save *some* executor utils, but otherwise strip things down
# to reduct deqp build size:
mv executor/testlog-to-* .
rm -rf executor
fi
# Remove other mustpass files, since we saved off the ones we wanted to conventient locations above.
rm -rf assets/**/mustpass/
rm -rf external/**/mustpass/
rm -rf external/vulkancts/modules/vulkan/vk-main*
rm -rf external/vulkancts/modules/vulkan/vk-default
rm -rf external/openglcts/modules/cts-runner
rm -rf modules/internal
rm -rf execserver
rm -rf framework
find . -depth \( -iname '*cmake*' -o -name '*ninja*' -o -name '*.o' -o -name '*.a' \) -exec rm -rf {} \;
if [ "${DEQP_API}" = 'VK' ] || [ "${DEQP_API}" = 'VK-main' ]; then
${STRIP_CMD:-strip} external/vulkancts/modules/vulkan/deqp-vk
fi
if [ "${DEQP_API}" = 'GL' ] || [ "${DEQP_API}" = 'GLES' ]; then
${STRIP_CMD:-strip} external/openglcts/modules/glcts
fi
if [ "${DEQP_API}" = 'GLES' ]; then
${STRIP_CMD:-strip} modules/*/deqp-*
fi
du -sh ./*
popd
section_end deqp-$deqp_api

View File

@@ -1,19 +0,0 @@
#!/usr/bin/env bash
# shellcheck disable=SC2086 # we want word splitting
# When changing this file, you need to bump the following
# .gitlab-ci/image-tags.yml tags:
# DEBIAN_BUILD_TAG
set -uex
uncollapsed_section_start directx-headers "Building directx-headers"
git clone https://github.com/microsoft/DirectX-Headers -b v1.614.1 --depth 1
pushd DirectX-Headers
meson setup build --backend=ninja --buildtype=release -Dbuild-test=false ${EXTRA_MESON_ARGS:-}
meson install -C build
popd
rm -rf DirectX-Headers
section_end directx-headers

View File

@@ -1,52 +0,0 @@
#!/usr/bin/env bash
# shellcheck disable=SC1091 # The relative paths in this file only become valid at runtime.
# shellcheck disable=SC2034 # Variables are used in scripts called from here
# shellcheck disable=SC2086 # we want word splitting
# When changing this file, you need to bump the following
# .gitlab-ci/image-tags.yml tags:
# DEBIAN_TEST_VIDEO_TAG
# Install fluster in /fluster.
set -uex
section_start fluster "Installing Fluster"
# Do a very early check to make sure the tag is correct without the need of
# setting up the environment variables locally
ci_tag_build_time_check "FLUSTER_TAG"
FLUSTER_REVISION="e997402978f62428fffc8e5a4a709690d9ca9bc5"
git clone https://github.com/fluendo/fluster.git --single-branch --no-checkout
pushd fluster || exit
git checkout "${FLUSTER_REVISION}"
popd || exit
ARTIFACT_PATH="${DATA_STORAGE_PATH}/fluster/${FLUSTER_TAG}/vectors.tar.zst"
if FOUND_ARTIFACT_URL="$(find_s3_project_artifact "${ARTIFACT_PATH}")"; then
echo "Found fluster vectors at: ${FOUND_ARTIFACT_URL}"
mv fluster/ /
curl-with-retry "${FOUND_ARTIFACT_URL}" | tar --zstd -x -C /
else
echo "No cached vectors found, rebuilding..."
# Download the necessary vectors: H264, H265 and VP9
# When updating FLUSTER_REVISION, make sure to update the vectors if necessary or
# fluster-runner will report Missing results.
fluster/fluster.py download -j ${FDO_CI_CONCURRENT:-4} \
JVT-AVC_V1 JVT-FR-EXT JVT-MVC JVT-SVC_V1 \
JCT-VC-3D-HEVC JCT-VC-HEVC_V1 JCT-VC-MV-HEVC JCT-VC-RExt JCT-VC-SCC JCT-VC-SHVC \
VP9-TEST-VECTORS-HIGH VP9-TEST-VECTORS
# Build fluster vectors archive and upload it
tar --zstd -cf "vectors.tar.zst" fluster/resources/
ci-fairy s3cp --token-file "${S3_JWT_FILE}" "vectors.tar.zst" \
"https://${S3_BASE_PATH}/${CI_PROJECT_PATH}/${ARTIFACT_PATH}"
mv fluster/ /
fi
section_end fluster

View File

@@ -1,22 +0,0 @@
#!/bin/bash
# When changing this file, you need to bump the following
# .gitlab-ci/image-tags.yml tags:
# DEBIAN_TEST_VK_TAG
set -ex
uncollapsed_section_start fossilize "Building fossilize"
git clone https://github.com/ValveSoftware/Fossilize.git
cd Fossilize
git checkout b43ee42bbd5631ea21fe9a2dee4190d5d875c327
git submodule update --init
mkdir build
cd build
cmake -S .. -B . -G Ninja -DCMAKE_BUILD_TYPE=Release
ninja -C . install
cd ../..
rm -rf Fossilize
section_end fossilize

View File

@@ -1,23 +0,0 @@
#!/usr/bin/env bash
set -ex
uncollapsed_section_start gfxreconstruct "Building gfxreconstruct"
GFXRECONSTRUCT_VERSION=761837794a1e57f918a85af7000b12e531b178ae
git clone https://github.com/LunarG/gfxreconstruct.git \
--single-branch \
-b master \
--no-checkout \
/gfxreconstruct
pushd /gfxreconstruct
git checkout "$GFXRECONSTRUCT_VERSION"
git submodule update --init
git submodule update
cmake -S . -B _build -G Ninja -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX:PATH=/gfxreconstruct/build -DBUILD_WERROR=OFF
cmake --build _build --parallel --target tools/{replay,info}/install/strip
find . -not -path './build' -not -path './build/*' -delete
popd
section_end gfxreconstruct

View File

@@ -1,32 +0,0 @@
#!/usr/bin/env bash
# shellcheck disable=SC1091 # the path is created by the script
set -ex
uncollapsed_section_start kdl "Building kdl"
KDL_REVISION="cbbe5fd54505fd03ee34f35bfd16794f0c30074f"
KDL_CHECKOUT_DIR="/tmp/ci-kdl.git"
mkdir -p ${KDL_CHECKOUT_DIR}
pushd ${KDL_CHECKOUT_DIR}
git init
git remote add origin https://gitlab.freedesktop.org/gfx-ci/ci-kdl.git
git fetch --depth 1 origin ${KDL_REVISION}
git checkout FETCH_HEAD
popd
# Run venv in a subshell, so we don't accidentally leak the venv state into
# calling scripts
(
python3 -m venv /ci-kdl
source /ci-kdl/bin/activate &&
pushd ${KDL_CHECKOUT_DIR} &&
pip install -r requirements.txt &&
pip install . &&
popd
)
rm -rf ${KDL_CHECKOUT_DIR}
section_end kdl

View File

@@ -1,35 +0,0 @@
#!/usr/bin/env bash
set -uex
uncollapsed_section_start libclc "Building libclc"
export LLVM_CONFIG="llvm-config-${LLVM_VERSION:?"llvm unset!"}"
LLVM_TAG="llvmorg-15.0.7"
$LLVM_CONFIG --version
git config --global user.email "mesa@example.com"
git config --global user.name "Mesa CI"
git clone \
https://github.com/llvm/llvm-project \
--depth 1 \
-b "${LLVM_TAG}" \
/llvm-project
mkdir /libclc
pushd /libclc
cmake -S /llvm-project/libclc -B . -G Ninja -DLLVM_CONFIG="$LLVM_CONFIG" -DLIBCLC_TARGETS_TO_BUILD="spirv-mesa3d-;spirv64-mesa3d-" -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=/usr -DLLVM_SPIRV=/usr/bin/llvm-spirv
ninja
ninja install
popd
# workaroud cmake vs debian packaging.
mkdir -p /usr/lib/clc
ln -s /usr/share/clc/spirv64-mesa3d-.spv /usr/lib/clc/
ln -s /usr/share/clc/spirv-mesa3d-.spv /usr/lib/clc/
du -sh ./*
rm -rf /libclc /llvm-project
section_end libclc

View File

@@ -1,21 +0,0 @@
#!/usr/bin/env bash
# Script used for Android and Fedora builds (Debian builds get their libdrm version
# from https://gitlab.freedesktop.org/gfx-ci/ci-deb-repo - see PKG_REPO_REV)
# shellcheck disable=SC2086 # we want word splitting
set -uex
uncollapsed_section_start libdrm "Building libdrm"
export LIBDRM_VERSION=libdrm-2.4.122
curl -L -O --retry 4 -f --retry-all-errors --retry-delay 60 \
https://dri.freedesktop.org/libdrm/"$LIBDRM_VERSION".tar.xz
tar -xvf "$LIBDRM_VERSION".tar.xz && rm "$LIBDRM_VERSION".tar.xz
cd "$LIBDRM_VERSION"
meson setup build -D vc4=disabled -D freedreno=disabled -D etnaviv=disabled ${EXTRA_MESON_ARGS:-}
meson install -C build
cd ..
rm -rf "$LIBDRM_VERSION"
section_end libdrm

View File

@@ -1,30 +0,0 @@
#!/usr/bin/env bash
set -ex
uncollapsed_section_start llvm-spirv "Building LLVM-SPIRV-Translator"
if [ "${LLVM_VERSION:?llvm version not set}" -ge 18 ]; then
VER="${LLVM_VERSION}.1.0"
else
VER="${LLVM_VERSION}.0.0"
fi
curl -L --retry 4 -f --retry-all-errors --retry-delay 60 \
-O "https://github.com/KhronosGroup/SPIRV-LLVM-Translator/archive/refs/tags/v${VER}.tar.gz"
tar -xvf "v${VER}.tar.gz" && rm "v${VER}.tar.gz"
mkdir "SPIRV-LLVM-Translator-${VER}/build"
pushd "SPIRV-LLVM-Translator-${VER}/build"
cmake .. -G Ninja -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=/usr
ninja
ninja install
# For some reason llvm-spirv is not installed by default
ninja llvm-spirv
cp tools/llvm-spirv/llvm-spirv /usr/bin/
popd
du -sh "SPIRV-LLVM-Translator-${VER}"
rm -rf "SPIRV-LLVM-Translator-${VER}"
section_end llvm-spirv

View File

@@ -1,31 +0,0 @@
#!/usr/bin/env bash
set -ex
# When changing this file, you need to bump the following
# .gitlab-ci/image-tags.yml tags:
# ALPINE_X86_64_BUILD_TAG
# DEBIAN_BASE_TAG
# DEBIAN_BUILD_TAG
# FEDORA_X86_64_BUILD_TAG
uncollapsed_section_start mold "Building mold"
MOLD_VERSION="2.32.0"
git clone -b v"$MOLD_VERSION" --single-branch --depth 1 https://github.com/rui314/mold.git
pushd mold
cmake -DCMAKE_BUILD_TYPE=Release -D BUILD_TESTING=OFF -D MOLD_LTO=ON
cmake --build . --parallel "${FDO_CI_CONCURRENT:-4}"
cmake --install . --strip
# Always use mold from now on
find /usr/bin \( -name '*-ld' -o -name 'ld' \) \
-exec ln -sf /usr/local/bin/ld.mold {} \; \
-exec ls -l {} +
popd
rm -rf mold
section_end mold

View File

@@ -1,41 +0,0 @@
#!/bin/bash
# shellcheck disable=SC2086 # we want word splitting
set -uex
section_start piglit "Building piglit"
# When changing this file, you need to bump the following
# .gitlab-ci/image-tags.yml tags:
# DEBIAN_TEST_GL_TAG
# DEBIAN_TEST_VK_TAG
# Do a very early check to make sure the tag is correct without the need of
# setting up the environment variables locally
ci_tag_build_time_check "PIGLIT_TAG"
REV="a0a27e528f643dfeb785350a1213bfff09681950"
git clone https://gitlab.freedesktop.org/mesa/piglit.git --single-branch --no-checkout /piglit
pushd /piglit
git checkout "$REV"
patch -p1 <$OLDPWD/.gitlab-ci/piglit/disable-vs_in.diff
cmake -S . -B . -G Ninja -DCMAKE_BUILD_TYPE=Release $PIGLIT_OPTS ${EXTRA_CMAKE_ARGS:-}
ninja ${PIGLIT_BUILD_TARGETS:-}
find . -depth \( -name .git -o -name '*ninja*' -o -iname '*cmake*' -o -name '*.[chao]' \) \
! -name 'include_test.h' -exec rm -rf {} \;
rm -rf target_api
if [ "${PIGLIT_BUILD_TARGETS:-}" = "piglit_replayer" ]; then
find . -depth \
! -regex "^\.$" \
! -regex "^\.\/piglit.*" \
! -regex "^\.\/framework.*" \
! -regex "^\.\/bin$" \
! -regex "^\.\/bin\/replayer\.py" \
! -regex "^\.\/templates.*" \
! -regex "^\.\/tests$" \
! -regex "^\.\/tests\/replay\.py" \
-exec rm -rf {} \; 2>/dev/null
fi
popd
section_end piglit

View File

@@ -1,38 +0,0 @@
#!/bin/bash
# Note that this script is not actually "building" rust, but build- is the
# convention for the shared helpers for putting stuff in our containers.
set -ex
section_start rust "Building Rust toolchain"
# Pick a specific snapshot from rustup so the compiler doesn't drift on us.
RUST_VERSION=1.81.0-2024-09-05
# For rust in Mesa, we use rustup to install. This lets us pick an arbitrary
# version of the compiler, rather than whatever the container's Debian comes
# with.
curl -L --retry 4 -f --retry-all-errors --retry-delay 60 \
--proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh -s -- \
--default-toolchain $RUST_VERSION \
--profile minimal \
-y
# Make rustup tools available in the PATH environment variable
# shellcheck disable=SC1091
. "$HOME/.cargo/env"
rustup component add clippy rustfmt
# Set up a config script for cross compiling -- cargo needs your system cc for
# linking in cross builds, but doesn't know what you want to use for system cc.
cat > "$HOME/.cargo/config" <<EOF
[target.armv7-unknown-linux-gnueabihf]
linker = "arm-linux-gnueabihf-gcc"
[target.aarch64-unknown-linux-gnu]
linker = "aarch64-linux-gnu-gcc"
EOF
section_end rust

View File

@@ -1,18 +0,0 @@
#!/usr/bin/env bash
# When changing this file, you need to bump the following
# .gitlab-ci/image-tags.yml tags:
# DEBIAN_BUILD_TAG
set -ex
uncollapsed_section_start shader-db "Building shader-db"
pushd /usr/local
git clone https://gitlab.freedesktop.org/mesa/shader-db.git --depth 1
rm -rf shader-db/.git
cd shader-db
make
popd
section_end shader-db

View File

@@ -1,104 +0,0 @@
#!/usr/bin/env bash
# SPDX-License-Identifier: MIT
#
# Copyright © 2022 Collabora Limited
# Author: Guilherme Gallo <guilherme.gallo@collabora.com>
#
# When changing this file, you need to bump the following
# .gitlab-ci/image-tags.yml tags:
# DEBIAN_TEST_GL_TAG
set -uex
uncollapsed_section_start skqp "Building SkQP"
SKQP_BRANCH=android-cts-12.1_r5
SCRIPT_DIR="$(pwd)/.gitlab-ci/container"
SKQP_PATCH_DIR="${SCRIPT_DIR}/patches"
BASE_ARGS_GN_FILE="${SCRIPT_DIR}/build-skqp_base.gn"
case "$DEBIAN_ARCH" in
amd64)
SKQP_ARCH=x64
;;
armhf)
SKQP_ARCH=arm
;;
arm64)
SKQP_ARCH=arm64
;;
esac
SKIA_DIR=${SKIA_DIR:-$(mktemp -d)}
SKQP_OUT_DIR=${SKIA_DIR}/out/${SKQP_ARCH}
SKQP_INSTALL_DIR=${SKQP_INSTALL_DIR:-/skqp}
SKQP_ASSETS_DIR="${SKQP_INSTALL_DIR}/assets"
SKQP_BINARIES=(skqp list_gpu_unit_tests list_gms)
create_gn_args() {
# gn can be configured to cross-compile skia and its tools
# It is important to set the target_cpu to guarantee the intended target
# machine
cp "${BASE_ARGS_GN_FILE}" "${SKQP_OUT_DIR}"/args.gn
echo "target_cpu = \"${SKQP_ARCH}\"" >> "${SKQP_OUT_DIR}"/args.gn
}
download_skia_source() {
if [ -z ${SKIA_DIR+x} ]
then
return 1
fi
# Skia cloned from https://android.googlesource.com/platform/external/skqp
# has all needed assets tracked on git-fs
SKQP_REPO=https://android.googlesource.com/platform/external/skqp
git clone --branch "${SKQP_BRANCH}" --depth 1 "${SKQP_REPO}" "${SKIA_DIR}"
}
download_skia_source
pushd "${SKIA_DIR}"
# Apply all skqp patches for Mesa CI
cat "${SKQP_PATCH_DIR}"/build-skqp_*.patch |
patch -p1
# hack for skqp see the clang
pushd /usr/bin/
ln -s "../lib/llvm-${LLVM_VERSION}/bin/clang" clang
ln -s "../lib/llvm-${LLVM_VERSION}/bin/clang++" clang++
popd
# Fetch some needed build tools needed to build skia/skqp.
# Basically, it clones repositories with commits SHAs from ${SKIA_DIR}/DEPS
# directory.
python3 tools/git-sync-deps
mkdir -p "${SKQP_OUT_DIR}"
mkdir -p "${SKQP_INSTALL_DIR}"
create_gn_args
# Build and install skqp binaries
bin/gn gen "${SKQP_OUT_DIR}"
for BINARY in "${SKQP_BINARIES[@]}"
do
/usr/bin/ninja -C "${SKQP_OUT_DIR}" "${BINARY}"
# Strip binary, since gn is not stripping it even when `is_debug == false`
${STRIP_CMD:-strip} "${SKQP_OUT_DIR}/${BINARY}"
install -m 0755 "${SKQP_OUT_DIR}/${BINARY}" "${SKQP_INSTALL_DIR}"
done
# Move assets to the target directory, which will reside in rootfs.
mv platform_tools/android/apps/skqp/src/main/assets/ "${SKQP_ASSETS_DIR}"
popd
rm -Rf "${SKIA_DIR}"
set +ex
section_end skqp

View File

@@ -1,64 +0,0 @@
cc = "clang"
cxx = "clang++"
extra_cflags = [
"-Wno-error",
"-DSK_ENABLE_DUMP_GPU",
"-DSK_BUILD_FOR_SKQP"
]
extra_cflags_cc = [
"-Wno-error",
# skqp build process produces a lot of compilation warnings, silencing
# most of them to remove clutter and avoid the CI job log to exceed the
# maximum size
# GCC flags
"-Wno-redundant-move",
"-Wno-suggest-override",
"-Wno-class-memaccess",
"-Wno-deprecated-copy",
"-Wno-uninitialized",
# Clang flags
"-Wno-macro-redefined",
"-Wno-anon-enum-enum-conversion",
"-Wno-suggest-destructor-override",
"-Wno-return-std-move-in-c++11",
"-Wno-extra-semi-stmt",
"-Wno-reserved-identifier",
"-Wno-bitwise-instead-of-logical",
"-Wno-reserved-identifier",
"-Wno-psabi",
"-Wno-unused-but-set-variable",
"-Wno-sizeof-array-div",
"-Wno-string-concatenation",
"-Wno-unsafe-buffer-usage",
"-Wno-switch-default",
"-Wno-cast-function-type-strict",
"-Wno-format",
"-Wno-enum-constexpr-conversion",
]
cc_wrapper = "ccache"
is_debug = false
skia_enable_fontmgr_android = false
skia_enable_fontmgr_empty = true
skia_enable_pdf = false
skia_enable_skottie = false
skia_skqp_global_error_tolerance = 8
skia_tools_require_resources = true
skia_use_dng_sdk = false
skia_use_expat = true
skia_use_icu = false
skia_use_libheif = false
skia_use_lua = false
skia_use_piex = false
skia_use_vulkan = true
target_os = "linux"

View File

@@ -1,30 +0,0 @@
#!/usr/bin/env bash
# shellcheck disable=SC2086 # we want word splitting
# When changing this file, you need to bump the following
# .gitlab-ci/image-tags.yml tags:
# DEBIAN_TEST_VIDEO_TAG
set -uex
section_start va-tools "Building va-tools"
git config --global user.email "mesa@example.com"
git config --global user.name "Mesa CI"
git clone \
https://github.com/intel/libva-utils.git \
-b 2.18.1 \
--depth 1 \
/va-utils
pushd /va-utils
# Too old libva in Debian 11. TODO: when this PR gets in, refer to the patch.
curl --fail -L https://github.com/intel/libva-utils/pull/329.patch | git am
meson setup build -D tests=true -Dprefix=/va ${EXTRA_MESON_ARGS:-}
meson install -C build
popd
rm -rf /va-utils
section_end va-tools

View File

@@ -1,67 +0,0 @@
#!/bin/bash
# When changing this file, you need to bump the following
# .gitlab-ci/image-tags.yml tags:
# DEBIAN_TEST_VK_TAG
set -ex
section_start vkd3d-proton "Building vkd3d-proton"
# Do a very early check to make sure the tag is correct without the need of
# setting up the environment variables locally
ci_tag_build_time_check "VKD3D_PROTON_TAG"
VKD3D_PROTON_COMMIT="6be781076617cb2cb3038710618acc3b57a674db"
VKD3D_PROTON_DST_DIR="/vkd3d-proton-tests"
VKD3D_PROTON_SRC_DIR="/vkd3d-proton-src"
VKD3D_PROTON_BUILD_DIR="/vkd3d-proton-build"
VKD3D_PROTON_WINE_DIR="/vkd3d-proton-wine64"
VKD3D_PROTON_S3_ARTIFACT="vkd3d-proton.tar.zst"
if [ ! -d "$VKD3D_PROTON_WINE_DIR" ]; then
echo "Fatal: Directory '$VKD3D_PROTON_WINE_DIR' does not exist. Aborting."
exit 1
fi
git clone https://github.com/HansKristian-Work/vkd3d-proton.git --single-branch -b master --no-checkout "$VKD3D_PROTON_SRC_DIR"
pushd "$VKD3D_PROTON_SRC_DIR"
git checkout "$VKD3D_PROTON_COMMIT"
git submodule update --init --recursive
git submodule update --recursive
meson setup \
-D enable_tests=true \
--buildtype release \
--prefix "$VKD3D_PROTON_DST_DIR" \
--strip \
--libdir "lib" \
"$VKD3D_PROTON_BUILD_DIR/build"
ninja -C "$VKD3D_PROTON_BUILD_DIR/build" install
install -m755 -t "${VKD3D_PROTON_DST_DIR}/" "$VKD3D_PROTON_BUILD_DIR/build/tests/d3d12"
mkdir "$VKD3D_PROTON_DST_DIR/tests"
cp \
"tests/test-runner.sh" \
"tests/d3d12_tests.h" \
"$VKD3D_PROTON_DST_DIR/tests/"
popd
# Archive and upload vkd3d-proton for use as a LAVA overlay, if the archive doesn't exist yet
ARTIFACT_PATH="${DATA_STORAGE_PATH}/vkd3d-proton/${VKD3D_PROTON_TAG}/${CI_JOB_NAME}/${VKD3D_PROTON_S3_ARTIFACT}"
if FOUND_ARTIFACT_URL="$(find_s3_project_artifact "${ARTIFACT_PATH}")"; then
echo "Found vkd3d-proton at: ${FOUND_ARTIFACT_URL}, skipping upload"
else
echo "Uploaded vkd3d-proton not found, reuploading..."
tar --zstd -cf "$VKD3D_PROTON_S3_ARTIFACT" -C / "${VKD3D_PROTON_DST_DIR#/}" "${VKD3D_PROTON_WINE_DIR#/}"
ci-fairy s3cp --token-file "${S3_JWT_FILE}" "$VKD3D_PROTON_S3_ARTIFACT" \
"https://${S3_BASE_PATH}/${CI_PROJECT_PATH}/${ARTIFACT_PATH}"
rm "$VKD3D_PROTON_S3_ARTIFACT"
fi
rm -rf "$VKD3D_PROTON_BUILD_DIR"
rm -rf "$VKD3D_PROTON_SRC_DIR"
section_end vkd3d-proton

View File

@@ -1,24 +0,0 @@
#!/usr/bin/env bash
# When changing this file, you need to bump the following
# .gitlab-ci/image-tags.yml tags:
# DEBIAN_TEST_GL_TAG
set -uex
uncollapsed_section_start vulkan-validation "Building Vulkan validation layers"
VALIDATION_TAG="snapshot-2025wk15"
git clone -b "$VALIDATION_TAG" --single-branch --depth 1 https://github.com/KhronosGroup/Vulkan-ValidationLayers.git
pushd Vulkan-ValidationLayers
# we don't need to build SPIRV-Tools tools
sed -i scripts/known_good.json -e 's/SPIRV_SKIP_EXECUTABLES=OFF/SPIRV_SKIP_EXECUTABLES=ON/'
python3 scripts/update_deps.py --dir external --config release --generator Ninja --optional tests
cmake -G Ninja -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=/usr -DBUILD_TESTS=OFF -DBUILD_WERROR=OFF -C external/helper.cmake -S . -B build
ninja -C build -j"${FDO_CI_CONCURRENT:-4}"
cmake --install build --strip
popd
rm -rf Vulkan-ValidationLayers
section_end vulkan-validation

View File

@@ -1,44 +0,0 @@
#!/usr/bin/env bash
# shellcheck disable=SC2086 # we want word splitting
set -uex
uncollapsed_section_start wayland "Building Wayland"
# When changing this file, you need to bump the following
# .gitlab-ci/image-tags.yml tags:
# ALPINE_X86_64_BUILD_TAG
# DEBIAN_BASE_TAG
# DEBIAN_BUILD_TAG
# DEBIAN_TEST_ANDROID_TAG
# DEBIAN_TEST_GL_TAG
# DEBIAN_TEST_VK_TAG
# FEDORA_X86_64_BUILD_TAG
export LIBWAYLAND_VERSION="1.24.0"
export WAYLAND_PROTOCOLS_VERSION="1.41"
git clone https://gitlab.freedesktop.org/wayland/wayland
cd wayland
git checkout "$LIBWAYLAND_VERSION"
# Build the scanner first in case we're a cross build
# Note the lack of EXTRA_MESON_ARGS here. This is always a native build
meson setup -Dtests=false -Ddocumentation=false -Ddtd_validation=false -Dlibraries=false -Dscanner=true _scanner
meson install -C _scanner
# Now build libwayland using the given scanner
meson setup -Ddocumentation=false -Ddtd_validation=false -Dlibraries=true -Dscanner=false _build ${EXTRA_MESON_ARGS:-}
meson install -C _build
cd ..
rm -rf wayland
git clone https://gitlab.freedesktop.org/wayland/wayland-protocols
cd wayland-protocols
git checkout "$WAYLAND_PROTOCOLS_VERSION"
meson setup -Dtests=false _build ${EXTRA_MESON_ARGS:-}
meson install -C _build
cd ..
rm -rf wayland-protocols
section_end wayland

View File

@@ -1,52 +0,0 @@
#!/usr/bin/env bash
# shellcheck disable=SC2086 # we want word splitting
set -uex
section_start weston "Building Weston"
# When changing this file, you need to bump the following
# .gitlab-ci/image-tags.yml tags:
# DEBIAN_BASE_TAG
export WESTON_VERSION="14.0.1"
git clone https://gitlab.freedesktop.org/wayland/weston
cd weston
git checkout "$WESTON_VERSION"
meson setup \
-Dbackend-drm=false \
-Dbackend-drm-screencast-vaapi=false \
-Dbackend-headless=true \
-Dbackend-pipewire=false \
-Dbackend-rdp=false \
-Dscreenshare=false \
-Dbackend-vnc=false \
-Dbackend-wayland=false \
-Dbackend-x11=false \
-Dbackend-default=headless \
-Drenderer-gl=true \
-Dxwayland=true \
-Dsystemd=false \
-Dremoting=false \
-Dpipewire=false \
-Dshell-desktop=true \
-Dshell-fullscreen=false \
-Dshell-ivi=false \
-Dshell-kiosk=false \
-Dcolor-management-lcms=false \
-Dimage-jpeg=false \
-Dimage-webp=false \
-Dtools= \
-Ddemo-clients=false \
-Dsimple-clients= \
-Dresize-pool=false \
-Dwcap-decode=false \
-Dtests=false \
-Ddoc=false \
_build ${EXTRA_MESON_ARGS:-}
meson install -C _build
cd ..
rm -rf weston
section_end weston

View File

@@ -1,31 +0,0 @@
#!/usr/bin/env bash
# shellcheck disable=SC2086 # we want word splitting
set -uex
uncollapsed_section_start xwayland "Building XWayland"
# When changing this file, you need to bump the following
# .gitlab-ci/image-tags.yml tags:
# DEBIAN_BASE_TAG
#
export XORGPROTO_VERSION="xorgproto-2024.1"
export XWAYLAND_VERSION="xwayland-24.1.8"
git clone https://gitlab.freedesktop.org/xorg/proto/xorgproto
cd xorgproto
git checkout "$XORGPROTO_VERSION"
meson setup _build ${EXTRA_MESON_ARGS:-}
meson install -C _build
cd ..
rm -rf xorgproto
git clone https://gitlab.freedesktop.org/xorg/xserver
cd xserver
git checkout "$XWAYLAND_VERSION"
meson setup _build ${EXTRA_MESON_ARGS:-}
meson install -C _build
cd ..
rm -rf xserver
section_end xwayland

View File

@@ -1,24 +0,0 @@
#!/usr/bin/env bash
# When changing this file, all the linux tags in
# .gitlab-ci/image-tags.yml need updating.
set -eu
# Early check for required env variables, relies on `set -u`
: "$S3_JWT_FILE_SCRIPT"
if [ -z "$1" ]; then
echo "usage: $(basename "$0") <CONTAINER_CI_JOB_NAME>" 1>&2
exit 1
fi
CONTAINER_CI_JOB_NAME="$1"
# Tasks to perform before executing the script of a container job
eval "$S3_JWT_FILE_SCRIPT"
unset S3_JWT_FILE_SCRIPT
trap 'rm -f ${S3_JWT_FILE}' EXIT INT TERM
bash ".gitlab-ci/container/${CONTAINER_CI_JOB_NAME}.sh"

View File

@@ -1,12 +0,0 @@
#!/usr/bin/env bash
if test -f /etc/debian_version; then
apt-get autoremove -y --purge
fi
# Clean up any build cache
rm -rf /root/.cache
if test -x /usr/bin/ccache; then
ccache --show-stats
fi

View File

@@ -1,66 +0,0 @@
#!/bin/sh
# When changing this file, you need to bump the following
# .gitlab-ci/image-tags.yml tags:
# DEBIAN_BUILD_TAG
if test -x /usr/bin/ccache; then
if test -f /etc/debian_version; then
CCACHE_PATH=/usr/lib/ccache
elif test -f /etc/alpine-release; then
CCACHE_PATH=/usr/lib/ccache/bin
else
CCACHE_PATH=/usr/lib64/ccache
fi
# Common setup among container builds before we get to building code.
export CCACHE_COMPILERCHECK=content
export CCACHE_COMPRESS=true
export CCACHE_DIR="/cache/$CI_PROJECT_NAME/ccache"
export PATH="$CCACHE_PATH:$PATH"
# CMake ignores $PATH, so we have to force CC/GCC to the ccache versions.
export CC="${CCACHE_PATH}/gcc"
export CXX="${CCACHE_PATH}/g++"
ccache --show-stats
fi
# Make a wrapper script for ninja to always include the -j flags
{
echo '#!/bin/sh -x'
# shellcheck disable=SC2016
echo '/usr/bin/ninja -j${FDO_CI_CONCURRENT:-4} "$@"'
} > /usr/local/bin/ninja
chmod +x /usr/local/bin/ninja
# Set MAKEFLAGS so that all make invocations in container builds include the
# flags (doesn't apply to non-container builds, but we don't run make there)
export MAKEFLAGS="-j${FDO_CI_CONCURRENT:-4}"
# Ensure that rust tools are in PATH if they exist
CARGO_ENV_FILE="$HOME/.cargo/env"
if [ -f "$CARGO_ENV_FILE" ]; then
# shellcheck disable=SC1090
source "$CARGO_ENV_FILE"
fi
ci_tag_early_checks() {
# Runs the first part of the build script to perform the tag check only
uncollapsed_section_switch "ci_tag_early_checks" "Ensuring component versions match declared tags in CI builds"
echo "[Structured Tagging] Checking components: ${CI_BUILD_COMPONENTS}"
# shellcheck disable=SC2086
for component in ${CI_BUILD_COMPONENTS}; do
bin/ci/update_tag.py --check ${component} || exit 1
done
echo "[Structured Tagging] Components check done"
section_end "ci_tag_early_checks"
}
# Check if each declared tag component is up to date before building
if [ -n "${CI_BUILD_COMPONENTS:-}" ]; then
# Remove any duplicates by splitting on whitespace, sorting, then joining back
CI_BUILD_COMPONENTS="$(echo "${CI_BUILD_COMPONENTS}" | xargs -n1 | sort -u | xargs)"
ci_tag_early_checks
fi

View File

@@ -1,37 +0,0 @@
#!/bin/bash
ndk=$1
arch=$2
cpu_family=$3
cpu=$4
cross_file="/cross_file-$arch.txt"
sdk_version=$5
# armv7 has the toolchain split between two names.
arch2=${6:-$2}
# Note that we disable C++ exceptions, because Mesa doesn't use exceptions,
# and allowing it in code generation means we get unwind symbols that break
# the libEGL and driver symbol tests.
cat > "$cross_file" <<EOF
[binaries]
ar = '$ndk/toolchains/llvm/prebuilt/linux-x86_64/bin/llvm-ar'
c = ['ccache', '$ndk/toolchains/llvm/prebuilt/linux-x86_64/bin/${arch2}${sdk_version}-clang', '-fno-exceptions', '-fno-unwind-tables', '-fno-asynchronous-unwind-tables']
cpp = ['ccache', '$ndk/toolchains/llvm/prebuilt/linux-x86_64/bin/${arch2}${sdk_version}-clang++', '-fno-exceptions', '-fno-unwind-tables', '-fno-asynchronous-unwind-tables', '--start-no-unused-arguments', '-static-libstdc++', '--end-no-unused-arguments']
c_ld = 'lld'
cpp_ld = 'lld'
strip = '$ndk/toolchains/llvm/prebuilt/linux-x86_64/bin/llvm-strip'
pkg-config = ['/usr/bin/pkgconf']
[host_machine]
system = 'android'
cpu_family = '$cpu_family'
cpu = '$cpu'
endian = 'little'
[properties]
needs_exe_wrapper = true
pkg_config_libdir = '/usr/local/lib/${arch2}/pkgconfig/:/${ndk}/toolchains/llvm/prebuilt/linux-x86_64/sysroot/usr/lib/${arch2}/pkgconfig/'
EOF

View File

@@ -1,40 +0,0 @@
#!/bin/sh
# shellcheck disable=SC2086 # we want word splitting
# Makes a .pc file in the Android NDK for meson to find its libraries.
set -ex
ndk="$1"
pc="$2"
cflags="$3"
libs="$4"
version="$5"
sdk_version="$6"
sysroot=$ndk/toolchains/llvm/prebuilt/linux-x86_64/sysroot
for arch in \
x86_64-linux-android \
i686-linux-android \
aarch64-linux-android \
arm-linux-androideabi; do
pcdir=$sysroot/usr/lib/$arch/pkgconfig
mkdir -p $pcdir
cat >$pcdir/$pc <<EOF
prefix=$sysroot
exec_prefix=$sysroot
libdir=$sysroot/usr/lib/$arch/$sdk_version
sharedlibdir=$sysroot/usr/lib/$arch
includedir=$sysroot/usr/include
Name: zlib
Description: zlib compression library
Version: $version
Requires:
Libs: -L$sysroot/usr/lib/$arch/$sdk_version $libs
Cflags: -I$sysroot/usr/include $cflags
EOF
done

View File

@@ -1,54 +0,0 @@
#!/bin/bash
arch=$1
cross_file="/cross_file-$arch.txt"
meson env2mfile --cross --debarch "$arch" -o "$cross_file"
# Explicitly set ccache path for cross compilers
sed -i "s|/usr/bin/\([^-]*\)-linux-gnu\([^-]*\)-g|/usr/lib/ccache/\\1-linux-gnu\\2-g|g" "$cross_file"
# Rely on qemu-user being configured in binfmt_misc on the host
# shellcheck disable=SC1003 # how this sed doesn't seems to work for me locally
sed -i -e '/\[properties\]/a\' -e "needs_exe_wrapper = False" "$cross_file"
# Add a line for rustc, which meson env2mfile is missing.
cc=$(sed -n "s|^c\s*=\s*\[?'\(.*\)'\]?|\1|p" < "$cross_file")
if [[ "$arch" = "arm64" ]]; then
rust_target=aarch64-unknown-linux-gnu
elif [[ "$arch" = "armhf" ]]; then
rust_target=armv7-unknown-linux-gnueabihf
elif [[ "$arch" = "i386" ]]; then
rust_target=i686-unknown-linux-gnu
elif [[ "$arch" = "ppc64el" ]]; then
rust_target=powerpc64le-unknown-linux-gnu
elif [[ "$arch" = "s390x" ]]; then
rust_target=s390x-unknown-linux-gnu
else
echo "Needs rustc target mapping"
fi
# shellcheck disable=SC1003 # how this sed doesn't seems to work for me locally
sed -i -e '/\[binaries\]/a\' -e "rust = ['rustc', '--target=$rust_target', '-C', 'linker=$cc']" "$cross_file"
# Set up cmake cross compile toolchain file for dEQP builds
toolchain_file="/toolchain-$arch.cmake"
if [[ "$arch" = "arm64" ]]; then
GCC_ARCH="aarch64-linux-gnu"
DE_CPU="DE_CPU_ARM_64"
elif [[ "$arch" = "armhf" ]]; then
GCC_ARCH="arm-linux-gnueabihf"
DE_CPU="DE_CPU_ARM"
fi
if [[ -n "$GCC_ARCH" ]]; then
{
echo "set(CMAKE_SYSTEM_NAME Linux)";
echo "set(CMAKE_SYSTEM_PROCESSOR arm)";
echo "set(CMAKE_C_COMPILER /usr/lib/ccache/$GCC_ARCH-gcc)";
echo "set(CMAKE_CXX_COMPILER /usr/lib/ccache/$GCC_ARCH-g++)";
echo "set(CMAKE_CXX_FLAGS_INIT \"-Wno-psabi\")"; # makes ABI warnings quiet for ARMv7
echo "set(ENV{PKG_CONFIG} \"/usr/bin/$GCC_ARCH-pkgconf\")";
echo "set(DE_CPU $DE_CPU)";
} > "$toolchain_file"
fi

View File

@@ -1,94 +0,0 @@
#!/usr/bin/env bash
# shellcheck disable=SC2086 # we want word splitting
set -e
. .gitlab-ci/setup-test-env.sh
set -o xtrace
export DEBIAN_FRONTEND=noninteractive
: "${LLVM_VERSION:?llvm version not set!}"
# Ephemeral packages (installed for this script and removed again at the end)
EPHEMERAL=(
)
DEPS=(
"crossbuild-essential-$arch"
"pkgconf:$arch"
"libasan8:$arch"
"libdrm-dev:$arch"
"libelf-dev:$arch"
"libexpat1-dev:$arch"
"libffi-dev:$arch"
"libpciaccess-dev:$arch"
"libstdc++6:$arch"
"libvulkan-dev:$arch"
"libx11-dev:$arch"
"libx11-xcb-dev:$arch"
"libxcb-dri2-0-dev:$arch"
"libxcb-dri3-dev:$arch"
"libxcb-glx0-dev:$arch"
"libxcb-present-dev:$arch"
"libxcb-randr0-dev:$arch"
"libxcb-shm0-dev:$arch"
"libxcb-xfixes0-dev:$arch"
"libxdamage-dev:$arch"
"libxext-dev:$arch"
"libxrandr-dev:$arch"
"libxshmfence-dev:$arch"
"libxxf86vm-dev:$arch"
)
dpkg --add-architecture $arch
echo "deb [trusted=yes] https://gitlab.freedesktop.org/gfx-ci/ci-deb-repo/-/raw/${PKG_REPO_REV}/ ${FDO_DISTRIBUTION_VERSION%-*} main" | tee /etc/apt/sources.list.d/gfx-ci_.list
apt-get update
apt-get install -y --no-remove "${DEPS[@]}" "${EPHEMERAL[@]}" \
$EXTRA_LOCAL_PACKAGES
if [[ $arch != "armhf" ]]; then
# We don't need clang-format for the crossbuilds, but the installed amd64
# package will conflict with libclang. Uninstall clang-format (and its
# problematic dependency) to fix.
apt-get remove -y "clang-format-${LLVM_VERSION}" "libclang-cpp${LLVM_VERSION}" \
"llvm-${LLVM_VERSION}-runtime" "llvm-${LLVM_VERSION}-linker-tools"
# llvm-*-tools:$arch conflicts with python3:amd64. Install dependencies only
# with apt-get, then force-install llvm-*-{dev,tools}:$arch with dpkg to get
# around this.
apt-get install -y --no-remove --no-install-recommends \
"libclang-cpp${LLVM_VERSION}:$arch" \
"libgcc-s1:$arch" \
"libtinfo-dev:$arch" \
"libz3-dev:$arch" \
"llvm-${LLVM_VERSION}:$arch" \
zlib1g
fi
. .gitlab-ci/container/create-cross-file.sh $arch
. .gitlab-ci/container/container_pre_build.sh
# dependencies where we want a specific version
MULTIARCH_PATH=$(dpkg-architecture -A $arch -qDEB_TARGET_MULTIARCH)
export EXTRA_MESON_ARGS="--cross-file=/cross_file-${arch}.txt -D libdir=lib/${MULTIARCH_PATH}"
. .gitlab-ci/container/build-wayland.sh
. .gitlab-ci/container/build-directx-headers.sh
apt-get purge -y "${EPHEMERAL[@]}"
. .gitlab-ci/container/container_post_build.sh
# This needs to be done after container_post_build.sh, or apt-get breaks in there
if [[ $arch != "armhf" ]]; then
apt-get download llvm-"${LLVM_VERSION}"-{dev,tools}:"$arch"
dpkg -i --force-depends llvm-"${LLVM_VERSION}"-*_"${arch}".deb
rm llvm-"${LLVM_VERSION}"-*_"${arch}".deb
fi

View File

@@ -1,118 +0,0 @@
#!/usr/bin/env bash
# shellcheck disable=SC2086 # we want word splitting
# When changing this file, you need to bump the following
# .gitlab-ci/image-tags.yml tags:
# DEBIAN_BUILD_TAG
set -e
. .gitlab-ci/setup-test-env.sh
set -x
EPHEMERAL=(
autoconf
rdfind
unzip
)
apt-get install -y --no-remove "${EPHEMERAL[@]}"
. .gitlab-ci/container/container_pre_build.sh
# Fetch the NDK and extract just the toolchain we want.
ndk="android-ndk-${ANDROID_NDK_VERSION}"
curl -L --retry 4 -f --retry-all-errors --retry-delay 60 \
-o $ndk.zip https://dl.google.com/android/repository/$ndk-linux.zip
unzip -d / $ndk.zip "$ndk/source.properties" "$ndk/build/cmake/*" "$ndk/toolchains/llvm/*"
rm $ndk.zip
# Since it was packed as a zip file, symlinks/hardlinks got turned into
# duplicate files. Turn them into hardlinks to save on container space.
rdfind -makehardlinks true -makeresultsfile false /${ndk}/
# Drop some large tools we won't use in this build.
find /${ndk}/ -type f \( -iname '*clang-check*' -o -iname '*clang-tidy*' -o -iname '*lldb*' \) -exec rm -f {} \;
sh .gitlab-ci/container/create-android-ndk-pc.sh /$ndk zlib.pc "" "-lz" "1.2.3" $ANDROID_SDK_VERSION
sh .gitlab-ci/container/create-android-cross-file.sh /$ndk x86_64-linux-android x86_64 x86_64 $ANDROID_SDK_VERSION
sh .gitlab-ci/container/create-android-cross-file.sh /$ndk i686-linux-android x86 x86 $ANDROID_SDK_VERSION
sh .gitlab-ci/container/create-android-cross-file.sh /$ndk aarch64-linux-android aarch64 armv8 $ANDROID_SDK_VERSION
sh .gitlab-ci/container/create-android-cross-file.sh /$ndk arm-linux-androideabi arm armv7hl $ANDROID_SDK_VERSION armv7a-linux-androideabi
# Build libdrm for the host (Debian) environment, so it's available for
# binaries we'll run as part of the build process
. .gitlab-ci/container/build-libdrm.sh
# Build libdrm for the NDK environment, so it's available when building for
# the Android target
for arch in \
x86_64-linux-android \
i686-linux-android \
aarch64-linux-android \
arm-linux-androideabi ; do
EXTRA_MESON_ARGS="--cross-file=/cross_file-$arch.txt --libdir=lib/$arch -Dnouveau=disabled -Dintel=disabled" \
. .gitlab-ci/container/build-libdrm.sh
done
rm -rf $LIBDRM_VERSION
export LIBELF_VERSION=libelf-0.8.13
curl -L --retry 4 -f --retry-all-errors --retry-delay 60 \
-O https://fossies.org/linux/misc/old/$LIBELF_VERSION.tar.gz
# Not 100% sure who runs the mirror above so be extra careful
if ! echo "4136d7b4c04df68b686570afa26988ac ${LIBELF_VERSION}.tar.gz" | md5sum -c -; then
echo "Checksum failed"
exit 1
fi
tar -xf ${LIBELF_VERSION}.tar.gz
cd $LIBELF_VERSION
# Work around a bug in the original configure not enabling __LIBELF64.
autoreconf
for arch in \
x86_64-linux-android \
i686-linux-android \
aarch64-linux-android \
arm-linux-androideabi ; do
ccarch=${arch}
if [ "${arch}" == 'arm-linux-androideabi' ]
then
ccarch=armv7a-linux-androideabi
fi
export CC=/${ndk}/toolchains/llvm/prebuilt/linux-x86_64/bin/llvm-ar
export CC=/${ndk}/toolchains/llvm/prebuilt/linux-x86_64/bin/${ccarch}${ANDROID_SDK_VERSION}-clang
export CXX=/${ndk}/toolchains/llvm/prebuilt/linux-x86_64/bin/${ccarch}${ANDROID_SDK_VERSION}-clang++
export LD=/${ndk}/toolchains/llvm/prebuilt/linux-x86_64/bin/${arch}-ld
export RANLIB=/${ndk}/toolchains/llvm/prebuilt/linux-x86_64/bin/llvm-ranlib
# The configure script doesn't know about android, but doesn't really use the host anyway it
# seems
./configure --host=x86_64-linux-gnu --disable-nls --disable-shared \
--libdir=/usr/local/lib/${arch}
make install
make distclean
unset CC
unset CC
unset CXX
unset LD
unset RANLIB
done
cd ..
rm -rf $LIBELF_VERSION
# Build LLVM libraries for Android only if necessary, uploading a copy to S3
# to avoid rebuilding it in a future run if the version does not change.
bash .gitlab-ci/container/build-android-x86_64-llvm.sh
apt-get purge -y "${EPHEMERAL[@]}"
. .gitlab-ci/container/container_post_build.sh

View File

@@ -1,4 +0,0 @@
#!/usr/bin/env bash
DEBIAN_ARCH=armhf \
. .gitlab-ci/container/debian/test-base.sh

View File

@@ -1,4 +0,0 @@
#!/usr/bin/env bash
DEBIAN_ARCH="armhf" \
. .gitlab-ci/container/debian/test-gl.sh

View File

@@ -1,4 +0,0 @@
#!/usr/bin/env bash
DEBIAN_ARCH="armhf" \
. .gitlab-ci/container/debian/test-vk.sh

View File

@@ -1,122 +0,0 @@
#!/usr/bin/env bash
# shellcheck disable=SC2086 # we want word splitting
# When changing this file, you need to bump the following
# .gitlab-ci/image-tags.yml tags:
# DEBIAN_BUILD_TAG
set -e
. .gitlab-ci/setup-test-env.sh
set -o xtrace
: "${LLVM_VERSION:?llvm version not set}"
apt-get -y install ca-certificates curl gnupg2
sed -i -e 's/http:\/\/deb/https:\/\/deb/g' /etc/apt/sources.list.d/*
echo "deb [trusted=yes] https://gitlab.freedesktop.org/gfx-ci/ci-deb-repo/-/raw/${PKG_REPO_REV}/ ${FDO_DISTRIBUTION_VERSION%-*} main" | tee /etc/apt/sources.list.d/gfx-ci_.list
. .gitlab-ci/container/debian/maybe-add-llvm-repo.sh
# Ephemeral packages (installed for this script and removed again at the end)
EPHEMERAL=(
libssl-dev
)
DEPS=(
apt-utils
android-libext4-utils
autoconf
automake
bc
bison
ccache
cmake
curl
"clang-${LLVM_VERSION}"
fastboot
flatbuffers-compiler
flex
g++
git
glslang-tools
kmod
"libclang-${LLVM_VERSION}-dev"
"libclang-cpp${LLVM_VERSION}-dev"
"libclang-common-${LLVM_VERSION}-dev"
libasan8
libdrm-dev
libelf-dev
libexpat1-dev
libflatbuffers-dev
"libllvm${LLVM_VERSION}"
libvulkan-dev
libx11-dev
libx11-xcb-dev
libxcb-dri2-0-dev
libxcb-dri3-dev
libxcb-glx0-dev
libxcb-present-dev
libxcb-randr0-dev
libxcb-shm0-dev
libxcb-xfixes0-dev
libxdamage-dev
libxext-dev
libxrandr-dev
libxshmfence-dev
libxtensor-dev
libxxf86vm-dev
libwayland-dev
libwayland-egl-backend-dev
"llvm-${LLVM_VERSION}-dev"
ninja-build
openssh-server
pkgconf
python3-mako
python3-pil
python3-pip
python3-pycparser
python3-requests
python3-setuptools
python3-venv
shellcheck
u-boot-tools
xz-utils
yamllint
zlib1g-dev
zstd
)
apt-get update
apt-get -y install "${DEPS[@]}" "${EPHEMERAL[@]}"
# Needed for ci-fairy s3cp
pip3 install --break-system-packages "ci-fairy[s3] @ git+https://gitlab.freedesktop.org/freedesktop/ci-templates@$MESA_TEMPLATES_COMMIT"
pip3 install --break-system-packages -r bin/ci/test/requirements.txt
. .gitlab-ci/container/install-meson.sh
arch=armhf
. .gitlab-ci/container/cross_build.sh
. .gitlab-ci/container/container_pre_build.sh
. .gitlab-ci/container/build-mold.sh
. .gitlab-ci/container/build-wayland.sh
. .gitlab-ci/container/build-llvm-spirv.sh
. .gitlab-ci/container/build-libclc.sh
. .gitlab-ci/container/build-rust.sh
. .gitlab-ci/container/build-bindgen.sh
apt-get purge -y "${EPHEMERAL[@]}"
. .gitlab-ci/container/container_post_build.sh

View File

@@ -1,4 +0,0 @@
#!/usr/bin/env bash
DEBIAN_ARCH=arm64 \
. .gitlab-ci/container/debian/test-base.sh

Some files were not shown because too many files have changed in this diff Show More