When we're about to re-arrange a bunch of blocks, it's a good idea to
make sure that we don't have deref uses crossing block boundaries.
Otherwise we may end up with a deref going through a phi and that would
be bad.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Cc: "18.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 0796c3934e)
This pass re-materializes deref instructions on a per-block basis to
ensure that every use of a deref occurs in the same block as the
instruction which uses it.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Cc: "18.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 7d1d1208c2)
[Juan A. Suarez: resolve trivial conflicts]
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Conflicts:
src/compiler/nir/nir_deref.c
Squashed with:
nir: add initializer data to fix MSVC compile error
CC: Jason Ekstrand <jason@jlekstrand.net>
Fixes: 82799a5d1b8 ("nir: Add a small pass to rematerialize derefs
per-block")
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
(cherry picked from commit 0c82e3603e)
Missing break; causes parameter checking to
never pass GL_FRAMEBUFFER_FLIP_Y_MESA parameters.
Fixes: 318c265160 ("mesa: GL_MESA_framebuffer_flip_y extension [v4]")
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 60d0c0d062)
Instances where direction was determined based on
winsys or user fbo and should be determined based on
FlipY.
Key STATE_FB_WPOS_Y_TRANSFORM for of FlipY instead of
_mesa_is_user_fbo. This corrects gl_FragCoord usage
when applying GL_MESA_framebuffer_flip_y.
Fixes: ab05dd183c ("i965: implement GL_MESA_framebuffer_flip_y [v3]")
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit ba6cc32cf9)
To get an useful UUID for systems that have a non-useful mtime
for the binaries.
I started using SHA1 to ensure we get reasonable mixing in the
various possibilities and the various build id lengths.
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
(cherry picked from commit d17443a459)
Gallium may pick L16A16_FLOAT to represent GL_INTENSITY16F if no intensity
format is provided by the driver. However, when calling
glGetTexLevelParameteriv(..., GL_TEXTURE_INTENSITY_SIZE, ...)
mesa will return a zero size because the actually used format has no
intensity channel and as a fallback only the sizes of the red/green
channels are checked.
Also checking for LA sizes in the allocated texture resolves this problem.
v2: Only check alpha channel size and return it (Marek)
L and A size are always the same in this case.
Fixes (on virgl):
ext_framebuffer_multisample-fast-clear GL_ARB_texture_float *
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107832
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 47e01e77d8)
Each query slot is a uint64_t and we were only zeroing half of it.
Fixes: 7ec6e4e689 "anv/query: implement multiview interactions"
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
(cherry picked from commit 07e214f1ce)
No shader-db changes on any Intel platform... which probably explains
why no bugs have been bisected to this problem since it landed in Mesa
18.1. :( The commit mentioned below is in 18.2, so 18.1 would need a
slightly different fix (due to code refactoring).
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Fixes: 77f269bb56 "i965/fs: Refactor propagation of conditional modifiers from compares to adds"
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com> (reviewed the original patch)
Cc: Matt Turner <mattst88@gmail.com> (reviewed the original patch)
(cherry picked from commit df9dbc03d3)
When we're mapping temp-resources, we clip the resource to the
transfer-box, which means the stride might not be correct any more.
So let's update the stride from the temp-resource, and recompute the
layer-stride.
This fixes crashes when running dEQP with --deqp-gl-config-name=rgba8888d24s8ms4
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Fixes: a8987b88ff "virgl: add driver for virtio-gpu 3D (v2)"
Reviewed-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit fa5e9f1f73)
Those operations do not map to actual hardware instructions, therefore
those should always be lowered to 32-bit instructions.
Fixes: 009c54aa7a "nv50/ir: Split 64-bit integer MAD/MUL operations"
Signed-off-by: Pierre Moreau <pierre.morrow@free.fr>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
(cherry picked from commit 21b92b3464)
If we end up never taking the loop that writes ret, we can end up with
an uninitialized value, and if we're *really* unlucky, that value can
be -1, causing us to go down an error-path instead of a success path.
This was obviously not intended, so let's just initialize this to zero.
Noticed by Valgrind:
Conditional jump or move depends on uninitialised value(s)
at 0xBA640A0: virgl_drm_winsys_resource_cache_create (virgl_drm_winsys.c:348)
by 0xBA62FCF: virgl_buffer_create (virgl_buffer.c:170)
by 0xBA605AC: virgl_resource_create (virgl_resource.c:60)
by 0xBCF816F: bufferobj_data (st_cb_bufferobjects.c:344)
by 0xBCF816F: st_bufferobj_data (st_cb_bufferobjects.c:390)
by 0xBB7E836: vbo_use_buffer_objects (vbo_exec_api.c:1136)
by 0xBCFCC6E: st_create_context_priv (st_context.c:414)
by 0xBCFD3CD: st_create_context (st_context.c:590)
by 0xBBB30CA: st_api_create_context (st_manager.c:896)
by 0xB981E76: dri_create_context (dri_context.c:155)
by 0xB97BDCE: driCreateContextAttribs (dri_util.c:473)
by 0x5288331: dri3_create_context_attribs (dri3_glx.c:309)
by 0x5264D64: glXCreateContextAttribsARB (create_context.c:78)
Fixes: a8987b88ff ("virgl: add driver for virtio-gpu 3D (v2)")
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
(cherry picked from commit eaa718588e)
Apparently for compute there are only 16 instead of the 32 for the
graphics path.
Fixes dEQP-VK.binding_model.descriptorset_random.sets16.noarray.ubolimitlow.sbolimitlow.imglimitlow.noiub.comp.0
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit 0dd8189f15)
Fixes the following building error in vc4 build:
In file included from external/mesa/src/gallium/drivers/vc4/kernel/vc4_render_cl.c:34:
In file included from external/mesa/src/gallium/drivers/vc4/kernel/vc4_drv.h:27:
In file included from external/mesa/src/gallium/drivers/vc4/vc4_simulator_validate.h:34:
In file included from external/mesa/src/gallium/drivers/vc4/vc4_context.h:39:
In file included from external/mesa/src/gallium/drivers/vc4/vc4_cl.h:56:
gen/STATIC_LIBRARIES/libmesa_broadcom_genxml_intermediates/broadcom/cle/v3d_packet_v21_pack.h:12:10:
fatal error: 'cle/v3d_packet_helpers.h' file not found
^~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
Fixes: 5b102160ae ("broadcom/genxml: Introduce a V3D packet/struct decoder.")
Cc: "18.2" <mesa-stable@lists.freedesktop.org>
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
(cherry picked from commit cc3b99bb48)
Fixes the following building error:
In file included from external/mesa/src/broadcom/cle/v3d_decoder.c:38:
In file included from external/mesa/src/broadcom/cle/v3d_packet_helpers.h:29:
external/mesa/src/gallium/auxiliary/util/u_math.h:42:10:
fatal error: 'pipe/p_compiler.h' file not found
^~~~~~~~~~~~~~~~~~~
1 error generated.
Fixes: 5b102160ae ("broadcom/genxml: Introduce a V3D packet/struct decoder.")
Cc: "18.2" <mesa-stable@lists.freedesktop.org>
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
(cherry picked from commit 9158e0bd82)
Fixes the following building error, happening when building both intel and broadcom:
Gen Header: libmesa_broadcom_genxml_32 <= v3d_packet_v21_pack.h
FAILED: gen/STATIC_LIBRARIES/libmesa_broadcom_genxml_intermediates/broadcom/cle/v3d_packet_v21_pack.h
/bin/bash -c "python external/mesa/src/broadcom/cle/gen_pack_header.py \
external/mesa/src/broadcom/cle/v3d_packet_v21.xml \
> gen/STATIC_LIBRARIES/libmesa_broadcom_genxml_intermediates/broadcom/cle/v3d_packet_v21_pack.h"
Traceback (most recent call last):
File "external/mesa/src/broadcom/cle/gen_pack_header.py", line 626, in <module>
p = Parser(sys.argv[2])
IndexError: list index out of range
header-gen macro is already defined by Intel genxml building rules
and the existing header-gen does not have the $(PRIVATE_VER) argument,
infact the bash command line logged in the building error is missing
exactly $(PRIVATE_VER) argument
Renaming the macro as pack-header-gen in src/broadcom/Android.genxml.mk
solves the building error, another possible way is to keep the gen rules
commands expanded and not use the macros.
Fixes: 7f80a9ff13 ("vc4: Introduce XML-based packet header generation like Intel's.")
Cc: "18.2" <mesa-stable@lists.freedesktop.org>
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
(cherry picked from commit 3341429d74)
When using Freecad, I was getting intermittent segfaults inside of
mesa. I traced it down to this path in st_cb_drawpixels.c where the
result of pipe_transfer_map wasn't being checked. In my case, it was
returning NULL because nouveau_bo_new returned ENOENT. I'm by no
means a mesa developer, but this patch solves the problem for me and
seems reasonable enough.
v2: Marek - also unmap the PBO and release the texture, and call
the make_texture function sooner for less cleanup
Cc: 18.1 18.2 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 936e0dcd61)
Indirect descriptors only need one entry, we don't have to
emit a location for every descriptors.
Fixes GPU hangs with new CTS:
dEQP-VK.binding_model.descriptorset_random.*
CC: 18.2 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
(cherry picked from commit 9de062ef20)
Let say, we first bind a graphics pipeline that needs indirect
descriptors sets. The userdata pointers will be emitted at draw
time. Then if we bind a compute pipeline that doesn't need any
indirect descriptors, the driver will re-emit them for all
grpahics stages.
To avoid this to happen, just check the bind point type.
CC: 18.2 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
(cherry picked from commit 748f4cce18)
This was wrong for descriptor #0 when all of them are indirect.
This is because indirect_offset was 0 and we emitted a
"normal" descriptor pointer for nothing.
While we are at it remove
radv_userdata_info::indirect_offset which is useless.
CC: 18.2 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
(cherry picked from commit aa30205929)
This fixes the situation where we'd send a shader with just the
header and no data.
piglit/glsl-max-varyings test was causing this to happen, and
the renderer fix was breaking it.
v2: drop fprintf
Fixes: a8987b88ff "virgl: add driver for virtio-gpu 3D (v2)"
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
(cherry picked from commit 240af61494)
The Vulkan 1.1.81 spec says:
"It is legal for offset.x + extent.width or offset.y + extent.height
to exceed the dimensions of the framebuffer - the scissor test still
applies as defined above. Rasterization does not produce fragments
outside of the framebuffer, so such fragments never have the scissor
test performed on them."
Elsewhere, the Vulkan 1.1.81 spec says:
"The application must ensure (using scissor if necessary) that all
rendering is contained within the render area, otherwise the pixels
outside of the render area become undefined and shader side effects
may occur for fragments outside the render area. The render area
must be contained within the framebuffer dimensions."
Unfortunately, there's some room for interpretation here as to what the
consequences are of having the render area set to exactly the
framebuffer dimensions and having a scissor that is larger than the
framebuffer. Given that GL and other APIs provide automatic clipping to
the framebuffer, it makes sense that applications would assume that
Vulkan does this as well. It costs us very little to play it safe and
just clamp client-provided scissors to the framebuffer dimensions.
Fortunately, the user is required to provide us with at least one
scissor so we don't need to handle the case where they don't.
Fixes: fb2a5ceb32 "anv: Emit DRAWING_RECTANGLE once at driver..."
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 465e5a868c)
There were two bugs working together to make things mostly work: I wasn't
dividing the VPM output size available by the size of a batch (vertex),
but I also had the size of the VPM reduced by a factor of 8.
Fixes dEQP-GLES3.functional.vertex_array_objects.all_attributes and it
seems also my intermittent varying failures.
Fixes: 1561e4984e ("v3d: Emit the VCM_CACHE_SIZE packet.")
(cherry picked from commit a91b158bd9)
gen9 hardware has a bug in the sampler cache that can cause GPU hangs
whenever an texture with aux compression enabled is in the sampler cache
together with an ASTC5x5 texture. Because we can't control what the
client binds at any given time, we have two options: resolve the CCS or
decompresss the ASTC. Doing a CCS or HiZ resolve is far less drastic
and will likely have a smaller performance impact.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Tested-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
(cherry picked from commit f9e630e23d)
Fixes
dEQP-GLES3.functional.fragment_ops.blend.default_framebuffer.rgb_func_alpha_func.dst.src_alpha_saturate_src_alpha_saturate
and friends with --deqp-egl-config-name=rgb565d0s0
Cc: "18.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f73f748323)
This reverts commit 2fd6f06faa.
Take back 28a3731e3f ("glsl: skip stringification in preprocessor if in
unreachable branch") after b9fe8ff23d ("glsl: fixer lexer for
unreachable defines") has made it to the branch.
Signed-off-by: Andres Gomez <agomez@igalia.com>
If we have something like:
#ifdef NOT_DEFINED
#define A_MACRO(x) \
if (x)
#endif
The # on the #define is not skipped but the define itself is so
this then gets recognised as #if.
Until 28a3731e3f this didn't happen because we ended up in
<HASH>{NONSPACE} where BEGIN INITIAL was called stopping the
problem from happening.
This change makes sure we never call RETURN_TOKEN_NEVER_SKIP for
if/else/endif when processing a define.
Cc: Ian Romanick <idr@freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107772
Tested-By: Eero Tamminen <eero.t.tamminen@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit b9fe8ff23d)
We should exit from the function 'util_vasprintf'
with error code -1 for case where 'malloc'
returns NULL
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Fixes: 864148d69e "util: add util_vasprintf() for Windows (v2)"
Signed-off-by: Andrii Simiklit <andrii.simiklit@globallogic.com>
(cherry picked from commit 65cfe698b0)
Fix an other regression of
mesa: Make gl_vertex_array contain pointers to first order VAO members.
The regression showed up with drivers using the tnl module and
was reproducible using xonotic-glx -benchmark demos/the-big-keybench.dem.
Fixes: 64d2a20480
mesa: Make gl_vertex_array contain pointers to first order VAO members.
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
(cherry picked from commit a6232b6932)
The brw_vs_prog_data::double_inputs_read field comes directly from
shader_info::double_inputs which may contain inputs which are not
actually read. Instead of using it directly, AND it with inputs_read
which is only things which are read. Otherwise, we may end up
subtracting too many elements when computing elem_count.
Cc: mesa-stable@lists.freedesktop.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103241
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
(cherry picked from commit 7b26741806)
We require a single version of libdrm for all of our libdrm
dependencies (core and driver), but the way this is structured can make
the error message less than helpful, as one driver might be the one
setting the libdrm requirement, while another might be the one that
generates the version failure.
This adds a simple message to the output announcing which libdrm module
set the version, which might be more helpful.
v2: - Use message suggested by Eric Engstrom
Fixes: c445b1d56f
("meson: Use the same version for all libdrm checks")
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
(cherry picked from commit d25a27ec56)
Fixes crash with
piglit/bin/map_buffer_range-invalidate CopyBufferSubData \
increment-offset -auto -fbo
* Resize the resource storage already when the count is equal to the
allocated size, fixes:
Invalid write of size 8
at 0xB72E4CF: virgl_drm_add_res (virgl_drm_winsys.c:629)
by 0xB72E4CF: virgl_drm_emit_res (virgl_drm_winsys.c:663)
by 0xB72A44A: virgl_encode_resource_copy_region (virgl_encode.c:776)
by 0xB40CD12: st_copy_buffer_subdata (st_cb_bufferobjects.c:585)
by 0xB244A3B: _mesa_CopyBufferSubData (bufferobj.c:2940)
by 0x109A1E: upload (invalidate.c:169)
by 0x109C2F: piglit_display (invalidate.c:215)
by 0x4F80FBE: run_test (piglit_fbo_framework.c:52)
by 0x4F66E5F: piglit_gl_test_run (piglit-framework-gl.c:229)
by 0x10949D: main (invalidate.c:47)
Address 0xbe07d30 is 0 bytes after a block of size 4,096 alloc'd
at 0x4C31B25: calloc (in
/usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0xB72DAAF: virgl_drm_cmd_buf_create (virgl_drm_winsys.c:567)
* Also resize the space allocated for the handles, fixes:
Invalid write of size 4
at 0xB72E4F0: virgl_drm_add_res (virgl_drm_winsys.c:631)
by 0xB72E4F0: virgl_drm_emit_res (virgl_drm_winsys.c:663)
by 0xB72A44A: virgl_encode_resource_copy_region (virgl_encode.c:776)
by 0xB40CD12: st_copy_buffer_subdata (st_cb_bufferobjects.c:585)
by 0xB244A3B: _mesa_CopyBufferSubData (bufferobj.c:2940)
by 0x109A1E: upload (invalidate.c:169)
by 0x109C2F: piglit_display (invalidate.c:215)
by 0x4F80FBE: run_test (piglit_fbo_framework.c:52)
by 0x4F66E5F: piglit_gl_test_run (piglit-framework-gl.c:229)
by 0x10949D: main (invalidate.c:47)
Address 0xbe08570 is 0 bytes after a block of size 2,048 alloc'd
at 0x4C2FB0F: malloc (
in /usr/lib/valgrind/vgpreload_memcheck-amd64- linux.so)
by 0xB72DAC8: virgl_drm_cmd_buf_create (virgl_drm_winsys.c:572)
Fixes: 4b15b5e803 ("virgl: resize resource bo allocation if we need to.")
v2: - Use REALLOC macro and avoid memory leak when re-allocation fails
- add Fixes tag (both Emil Velikov)
- reorder commit message
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
(cherry picked from commit 9b0e8d8723)
If color buffer is locked, do not set its wayland buffer to NULL;
otherwise it can not be freed later.
Rather, flag it in order to destroy it later on the release event.
v2: instruct release event to unlock only or free wl_buffer too (Daniel)
This also fixes dEQP-EGL.functional.swap_buffers_with_damage.* tests.
CC: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Daniel Stone <daniels@collabora.com>
(cherry picked from commit 54a9622dd5)
GL_STENCIL_INDEX uses GL_INTENSITY for the border color, which is nicer
to hardware that doesn't read the stencil border value from the X channel.
This fixes a bunch of dEQP tests on Vega & Raven.
Cc: 18.1 18.2 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 725e8ad559)
According to internal docs, some gen9 platforms have a pixel shader push
constant synchronization issue. Although not listed among said
platforms, this issue seems to be present on the GeminiLake 2x6's we've
tested.
We consider the available workarounds to be too detrimental on
performance. Instead, we mitigate the issue by applying part of one of
the workarounds. Re-emit PUSH_CONSTANT_ALLOC at the top of every batch
(as suggested by Ken).
Fixes ext_framebuffer_multisample-accuracy piglit test failures with the
following options:
* 6 depth_draw small depthstencil
* 8 stencil_draw small depthstencil
* 6 stencil_draw small depthstencil
* 8 depth_resolve small
* 6 stencil_resolve small depthstencil
* 4 stencil_draw small depthstencil
* 16 stencil_draw small depthstencil
* 16 depth_draw small depthstencil
* 2 stencil_resolve small depthstencil
* 6 stencil_draw small
* all_samples stencil_draw small
* 2 depth_draw small depthstencil
* all_samples depth_draw small depthstencil
* all_samples stencil_resolve small
* 4 depth_draw small depthstencil
* all_samples depth_draw small
* all_samples stencil_draw small depthstencil
* 4 stencil_resolve small depthstencil
* 4 depth_resolve small depthstencil
* all_samples stencil_resolve small depthstencil
v2: Include more platforms in WA (Ken).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106865
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93355
Cc: <mesa-stable@lists.freedesktop.org>
Tested-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 904c2a617d)
CTS doesn't test input clip/cull distances for the fragment
shader stage, which explains why this was totally broken. I
wrote a simple test locally that works now.
This fixes a crash with GTA V and DXVK.
Note that we are exporting unused parameters from the vertex
shader now, but this can't be optimized easily because we don't
keep the fragment shader info...
Cc: mesa-stable@lists.freedesktop.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107477
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
(cherry picked from commit 6f47df3129)
While adding transfer queues to radv, I started writing some tests,
the first test I wrote fell over copying a buffer larger than this
limit.
Checked AMDVLK and found the correct limit.
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 2c1f249f2b)
This fixes compilation of some "No Mans Sky" shaders where the stringification
happens in branches intended for DX12.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 28a3731e3f)
This effectively reverts a266934935 which
was a misguided attempt at protecting intel_query_dma_buf_modifiers from
invalid formats. Unfortunately, in some internal EGL cases, we can get
an SRGB format validly in this function. Rejecting such formats caused
us to not allow CCS in some cases where we should have been allowing it.
This regressed the performance of some SynMark tests as well as GfxBench
ALU2, Tessellation and Manhattan 3.0 tests
There's some question of whether or not we really should be using SRGB
"fourcc" formats that aren't actually in drm_foucc.h but there's not
much harm in allowing them through here.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107223
Fixes: a266934935 "i965/screen: Return false for unsupported..."
Tested-By: Eero Tamminen <eero.t.tamminen@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
(cherry picked from commit d9cf4308ce)
We already reject attempts to import images with invalid fourcc formats
but don't really guard the queries all that well. This makes us error
out in any calls to eglQueryDmaBufModifiersEXT if the given format is
not a valid fourcc format. We also add an assert to ensure that drivers
don't advertise any non-fourcc formats.
Cc: mesa-stable@lists.freedesktop.org
Tested-By: Eero Tamminen <eero.t.tamminen@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
(cherry picked from commit 8c1b9882b2)
Squashed with commit:
st/dri: Don't expose sRGB formats to clients
Though the SARGB8888 format is used internally through its FourCC value,
it is not a real format as defined by drm_fourcc.h; it cannot be used
with KMS or other interfaces expecting drm_fourcc.h format codes.
Ensure we don't advertise it through the dmabuf format/modifier query
interfaces, preventing us from tripping over an assert.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Michel Dänzer <michel.daenzer@amd.com>
Fixes: 8c1b9882b2 ("egl/dri2: Guard against invalid fourcc formats")
Acked-by: Jason Ekstrand <jason.ekstrand@intel.com>
(cherry picked from commit 01c0aa9f05)
When the SVBI Payload Enable is false I guess the register R1.4
which contains the Maximum Streamed Vertex Buffer Index is filled by zero
and GS stops to write transform feedback when the transform feedback
is not active.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107579
Signed-off-by: Andrii Simiklit <andrii.simiklit@globallogic.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
(cherry picked from commit 1b0df8a460)
If it's not the right bit-size, it may not actually be the correct
extraction. For now, we'll only worry about 32-bit versions.
Fixes: 905ff86198 "nir: Recognize open-coded extract_u16"
Fixes: 76289fbfa8 "nir: Recognize open-coded extract_u8"
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 116b47fe3c)
Newer blit tests are enabling depth&stencils blits. We currently don't
support it but can do by iterating over the aspects masks (copy some
logic from the CopyImage function).
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 9f44745eca ("anv: Use blorp to implement VkBlitImage")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 5a1c23d150)
pick: This commit addresses a regression introduced by previous commit
fa9e6c235d, which didn't make it for 18.2.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Currently we run the script but don't actually load any files, even in a
tarball where they exist.
Fixes: 3218056e0e
("meson: Build i965 and dri stack")
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
(cherry picked from commit 7c00db9527)
[Andres Gomez: resolve trivial conflicts]
Signed-off-by: Andres Gomez <agomez@igalia.com>
Conflicts:
src/util/xmlpool/meson.build
Instead of printing addresses like everyone else, we were accidentally
printing the offset from state base address. Also, state_map is a void
pointer so we were incrementing in bytes instead of dwords and every
state other than the first was wrong.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
(cherry picked from commit cbd4bc1346)
First of all, setting iter->name in advance_field is unnecessary because
it gets set by gen_decode_field which gets called immediately after
gen_decode_field in the one call-site. Second, we weren't properly
initializing start_bit and end_bit in the initial condition of
gen_field_iterator_next so the first field of a struct would get printed
wrong if it doesn't start on the first bit. This is fixed by adding a
iter_start_field helper which sets the field and also sets up the other
bits we need. This fixes decoding of 3DSTATE_SBE_SWIZ.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
(cherry picked from commit 2abd7ae189)
The batch decoder looks for a field with a particular name to decide
whether an MI_BB_START leads into a second batch buffer level. Because
the names are different between Gen7.5/8 and the newer generation we
fail that test and keep on reading (invalid) instructions.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107544
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit f430a37fa7)
>From Section 4.3.4 (Inputs) of the GLSL 1.50 spec:
"Only the input variables that are actually read need to be written
by the previous stage; it is allowed to have superfluous
declarations of input variables."
Fixes:
* interstage-multiple-shader-objects.shader_test
v2:
Update comment in ir.h since the usage of "used" field
has been extended.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101247
Signed-off-by: Vadym Shovkoplias <vadym.shovkoplias@globallogic.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
(cherry picked from commit 4a8444d5bc)
Just like the rest of the tree - these should be run either as part of
the build system check target, or at the very least with an explicitly
versioned python executable.
Fixes: db8cd8e367 ("glcpp/tests: Convert shell scripts to a python script")
Fixes: 97c28cb082 ("glsl/tests: Convert optimization-test.sh to pure python")
Fixes: 3b52d29227 ("glsl/tests: reimplement warnings-test in python")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
(cherry picked from commit 48820ed8da)
[Andres Gomez: resolve trivial conflicts]
Signed-off-by: Andres Gomez <agomez@igalia.com>
Conflicts:
src/compiler/glsl/tests/optimization_test.py
This is a patch from me and a patch from Mathieu Bridon squashed
together.
Signed-off-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Mathieu Bridon <bochecha@daitauha.fr>
(cherry picked from commit e15686567c)
[Andres Gomez: applied cleanly but backported as suggested by Emil]
Signed-off-by: Andres Gomez <agomez@igalia.com>
Haven't tested this, but we do include loader.h
in platform_android.c
Fixes: c5ec155685 ("meson: wire up egl/android")
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
(cherry picked from commit c731508b98)
The extension was exposed but not the functions.
This fixes:
dEQP-GLES31.functional.debug.negative_coverage.get_error.buffer.readn_pixels
dEQP-GLES31.functional.debug.negative_coverage.get_error.state.get_nuniformfv
dEQP-GLES31.functional.debug.negative_coverage.get_error.state.get_nuniformiv
Cc: 18.1 18.2 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
(cherry picked from commit 37eee90df7)
Fix rendering issues on BDW and SKL.
Fixes: 0288fe8d04
("i965/miptree: Use the correct BLT pitch")
Fixes the following regressions seen
exclusively on SKL:
* KHR-GL46.texture_barrier_ARB.disjoint-texels
* KHR-GL46.texture_barrier_ARB.overlapping-texels
* KHR-GL46.texture_barrier.disjoint-texels
* KHR-GL46.texture_barrier.overlapping-texels
and both on BDW and SKL:
* GTF-GL46.gtf21.GL2FixedTests.buffer_corners.buffer_corners
* GTF-GL46.gtf21.GL2FixedTests.stencil_plane_corners.stencil_plane_corners
v2: Note the fixed tests (Andres).
Don't cause failures with multisampled buffers (Andres).
Don't hamper SKL GT4 (Ken).
v3: Fix the Fixes tag (Dylan).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107359
Cc: <mesa-stable@lists.freedesktop.org>
Tested-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 6d80b0b4ba)
Check the destination's row pitch against the BLT engine's row pitch
limitation as well.
Fixes: 0288fe8d04
("i965/miptree: Use the correct BLT pitch")
v2: Fix the Fixes tag (Dylan).
Check the destination row pitch (Chris).
Reported-by: Dylan Baker <dylan@pnwbakers.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit b041fc0649)
With the current code, we didn't do the space checks prior
to atomic counter setup emission, but we also didn't add
atomic counters to the space check so we could get a flush
later as well.
These flushes would be bad, and lead to problems with
parallel tests. We have to ensure the atomic counter copy in,
draw emits and counter copy out are kept in the same command
submission unit.
This reworks the code to drop some useless masks, make the
counting separate to the emits, and make the space checker
handle atomic counter space.
[airlied: want this in 18.2]
Fixes: 06993e4ee (r600: add support for hw atomic counters. (v3))
(cherry picked from commit 32529e6084)
This fixes a regression with some Unity demos. Not sure
what the root cause of the problem is, especially because
the driver doesn't perform any fast color clears. So, it
shouldn't be needed to decompress DCC. RadeonSI says that
the decompression is relatively cheap if the surface has
been decompressed already.
One possible improvement is to two use predicates, one for
DCC and one for FCE that could be cleared when DCC, FMASK
or CMASK are performed by the driver. That might skip some
unnecessary decompression passes (not DCC though).
Fixes: ff7daadca1 ("radv: enable/disable predication for the DCC decompression pass")
CC: 18.2 <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107563
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
(cherry picked from commit 0aacb5eab6)
At the moment, depending on pipe transfer flags, the dumb
buffer map address can end up at either kms_sw_dt->ro_mapped
or kms_sw_dt->mapped.
When it's time to unmap the dumb buffer, both locations get unmapped,
even though one is probably initialized to 0.
That leads to the code segment getting unmapped at runtime and
crashes when trying to call into unrelated code.
This commit addresses the problem by using MAP_FAILED instead of
NULL for ro_mapped and mapped when the dumb buffer is unmapped,
and only unmapping mapped addresses at unmap time.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107098
Signed-off-by: Ray Strode <rstrode@redhat.com>
Fixes: d891f28df9 ("gallium/winsys/kms: Fix possible leak in map/unmap.")
Cc: Lepton Wu <lepton@chromium.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 9baff597ce)
Because lower_ycbcr gets called before apply_pipeline_layout, the
indices are all logical and the binding layout HW size is actually too
big for the bounds check. We should just use the regular logical array
size instead.
Fixes: f3e91e78a3 "anv: add nir lowering pass for ycbcr textures"
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
(cherry picked from commit 320dacb0a0)
When the number of unique BO is 0, we optimize the list creation
by copying all buffers of the current CS directly into it. But
this is only valid if the CS doesn't have virtual buffers,
otherwise they are not added and hw might report VM faults.
This fixes VM faults with:
dEQP-VK.sparse_resources.image_sparse_binding.2d.rgba8ui.1024_128_1
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
(cherry picked from commit d27e1584ce)
This was missing when VK_EXT_conditional_rendering has been
implemented. The predication type should be -1 to avoid
restoring previous state when performing a decompression pass
with DCC enabled.
Note that we don't have to handle secondary command buffers
because we don't support this feature currently.
CC: 18.2 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
(cherry picked from commit f3a78a9da0)
Seems like DXVK depends on that and it might get reverted
upstream. Since apps are not supposed to use 0 in v2 anyway,
we should be safe implementing the old behavior there.
Fixes: 66e12451ac "radv: Update to new VK_EXT_vertex_attribute_divisor to version 2."
CC: 18.2 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit 011a811652)
Commit 4434591bf5 caused substantially more URB messages in
geometry and tessellation shaders. Before we can really enable this
sort of optimization, We either need some way of combining them back
together into vectors or we need to do cross-stage vector element
elimination without splitting everything into scalars.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107510
Fixes: 4434591bf5 "intel/nir: Call nir_lower_io_to_scalar_early"
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Mark Janes <mark.a.janes@intel.com>
(cherry picked from commit 10f44da775)
Kernel (for ppgtt) requires memory address to be
aligned to page size (4096).
-v2: added marking that also fixes initial commit 01058a5522.
-v3: numbers replaced by PAGE_SIZE; buffer-object size is aligned
instead of alignment of offsets (Chris Wilson).
-v4: changes related to PAGE_SIZE moved to separate commit
-v5: restored alignment to page-size for 0-size.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106997
Fixes: a363bb2cd0 (i965: Allocate VMA in userspace for full-PPGTT systems.)
Fixes: 01058a5522 (i965: Add virtual memory allocator infrastructure to brw_bufmgr.)
Signed-off-by: Sergii Romantsov <sergii.romantsov@globallogic.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
(cherry picked from commit 24839663a4)
This patch fixes a regression in mesa 18.2 and mesa-dev branches
for HAVE_DRM_GRALLOC code path which is causing black screen on Android
and prevents boot due to SIGSEGV MAPERR crash related to unproper handling
of drm_gralloc drm FD in new droid_open_device() path.
Problem is due to c7bb82136b ("egl/android: Add DRM node probing and filtering")
To avoid the crash the former existing working droid_open_device() is restored,
renamed droid_open_device_drm_gralloc() and kept within HAVE_DRM_GRALLOC braces.
Tested with mesa-dev and mesa 18.2 branch and oreo-x86 bootanimation
and Androdi GUI booting is fixed with i965, nouveau, radeon.
The changes are compatible with gbm_gralloc, I've tested build with hwc too.
(v2) remove indentation from HAVE_DRM_GRALLOC pre-processor directive
NOTE: Definition of enum{} for GRALLOC_MODULE_PERFORM_GET_DRM_FD
is not necessary and it's actually causing a redefinition building error,
because in HAVE_DRM_GRALLOC path gralloc_drm.h is already exported
by libgralloc_drm which is currently still a dependency.
Fixes: c7bb82136b ("egl/android: Add DRM node probing and filtering")
Cc: "18.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
(cherry picked from commit 73b342c7a5)
Behavior wrt firstInstance got changed, and a divisor of 0 has been
disallowed.
The new version of the ext got published in specification 1.1.81.
Sending to stable since the only known user is DXVK, which needs
this for correctness.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
CC: 18.2 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 66e12451ac)
One of the reasons we didn't notice that R24_UNORM_X8_TYPELESS
destinations were broken was that an earlier layer was swapping it
out for B8G8R8A8_UNORM. That made Z24X8 -> Z24X8 blits work.
However, R32_FLOAT -> R24_UNORM_X8_TYPELESS was still totally broken.
The old code only considered one format at a time, without thinking
that format conversion may need to occur.
This patch moves the translation out to a place where it can consider
both formats. If both are Z24X8, we continue using B8G8R8A8_UNORM to
avoid having to do shader math workarounds. If we have a Z24X8
destination, but a non-matching source, we use our shader hacks to
actually render to it properly.
Fixes: 804856fa57 (intel/blorp: Handle more exotic destination formats)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit de57926dc9)
The hardware doesn't support rendering to R24_UNORM_X8_TYPELESS, so
Jason decided to fake it with a bit of shader math and R32_UNORM RTs.
The only problem is that R32_UNORM isn't renderable either...so we've
just traded one bad format for another.
This patch makes us use R32_UINT instead.
Fixes: 804856fa57 (intel/blorp: Handle more exotic destination formats)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 8a29086285)
The check for ETC2 compatibility was not updated when the fallback
format was changed.
Fixes: 71867a0a61
st/mesa: Fall back to R8G8B8A8_SRGB for ETC2
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit e94095ec30)
This is basically copied from the DRI2 destroy path. Without this,
Raspberry Pi would quickly run out of CMA during the EGL tests in the CTS
due to all the pixmaps laying around.
Fixes: f35198bade ("egl/x11: Implement dri3 support with loader's dri3 helper")
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
(cherry picked from commit b618d7ea59)
When the SIMD16 Gen4-5 fragment shader payload contains source depth
(g2-3), destination stencil (g4), and destination depth (g5-6), the
single register of stencil makes the destination depth unaligned.
We were generating this instruction in the RT write payload setup:
mov(16) m14<1>F g5<8,8,1>F { align1 compr };
which is illegal, instructions with a source region spanning more than
one register need to be aligned to even registers. This is because the
hardware implicitly does (nr | 1) instead of (nr + 1) when splitting the
compressed instruction into two mov(8)'s.
I believe this would cause the hardware to load g5 twice, replicating
subspan 0-1's destination depth to subspan 2-3. This showed up as 2x2
artifact blocks in both TIS-100 and Reicast.
Normally, we rely on the register allocator to even-align our virtual
GRFs. But we don't control the payload, so we need to lower SIMD widths
to make it work. To fix this, we teach lower_simd_width about the
restriction, and then call it again after lower_load_payload (which is
what generates the offending MOV).
Fixes: 8aee87fe4c (i965: Use SIMD16 instead of SIMD8 on Gen4 when possible.)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107212
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=13728
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: Diego Viola <diego.viola@gmail.com>
(cherry picked from commit 08a5c395ab)
This extension is not defined for indirect contexts. Marking it as
"client only", as the old code did here, would make the extension
available in indirect contexts, even though the server would certainly
not have it in its extension list.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 63a6b719d9)
We won't have an FD if we're just having the server wait on a fence
created by eglCreateSyncKHR(). Our seqno fences will happen in order, so
server-side waits are no-ops in that case. Fixes
dEQP-EGL.functional.sharing.gles2.multithread.simple_egl_server_sync.buffers.gen_delete
Fixes: b0acc3a562 ("broadcom/vc4: Native fence fd support")
(cherry picked from commit cfe69d0aaa)
According to EGL 1.5 spec, section 3.10.1.1 ("Native Window Resizing"):
"If the native window corresponding to _surface_ has been resized
prior to the swap, _surface_ must be resized to match. _surface_ will
normally be resized by the EGL implementation at the time the native
window is resized. If the implementation cannot do this transparently
to the client, then *eglSwapBuffers* must detect the change and
resize surface prior to copying its pixels to the native window."
So far, resizing a native window in Wayland/EGL was interpreted in Mesa
as a request to resize, which is not executed until the first draw call.
And hence, surface size is not updated until executing it. Thus,
querying the surface size with eglQuerySurface() after a window resize
still returns the old values.
This commit updates the surface size values as soon as the resize is
done, even when the real resize is done in the draw call. This makes the
semantics that any native window resize request take effect inmediately,
and if user calls eglQuerySurface() it will return the new resized
values.
v2: update surface size if there isn't a back surface (Daniel)
CC: Daniel Stone <daniel@fooishbar.org>
CC: mesa-stable@lists.freedesktop.org
Reviewed-by: Daniel Stone <daniels@collabora.com>
(cherry picked from commit a9fb331ea7)
When creating a windows surface with eglCreateWindowSurface(), the
width and height returned by eglQuerySurface(EGL_{WIDTH,HEIGHT}) is
invalid until buffers are updated (like calling glClear()).
But according to EGL 1.5 spec, section 3.5.6 ("Surface Attributes"):
"Querying EGL_WIDTH and EGL_HEIGHT returns respectively the width and
height, in pixels, of the surface. For a window or pixmap surface,
these values are initially equal to the width and height of the
native window or pixmap with respect to which the surface was
created"
This fixes dEQP-EGL.functional.color_clears.* CTS tests
v2:
- Do not modify attached_{width,height} (Daniel)
- Do not update size on resizing window (Brendan)
CC: Daniel Stone <daniel@fooishbar.org>
CC: Brendan King <brendan.king@imgtec.com>
CC: mesa-stable@lists.freedesktop.org
Tested-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Daniel Stone <daniels@collabora.com>
(cherry picked from commit 1fe7cbdf05)
The toggles were broken with the introduction of --enable-mangling.
Fixing that up might be possible, but it's not worth the complexity
since one can rename the libraries at any point.
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
(cherry picked from commit d5ac236471)
Fixes texturing from EGL images created from cubemap faces, as in
dEQP-EGL.functional.image.create.gles2_cubemap_negative_x_rgba_texture
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 9ab6912a00)
With a sufficently recent meson, the following warning is produced:
WARNING: Passed invalid keyword argument "extra_args".
WARNING: This will become a hard error in the future.
It seems that compiler.links(args:) is meant here.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-and-Tested-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
(cherry picked from commit a48c0659e1)
Noticed when trying to run current Mesa on rpi's downstream kernel.
Fixes: b0acc3a562 ("broadcom/vc4: Native fence fd support")
(cherry picked from commit 86095e9bb1)
In commit cf54bd5e8, dri_sw_winsys.c began using <sys/shm.h> to support
the new functions putImageShm, getImageShm in DRI_SWRastLoader. But
Android began supporting System V shared memory only in Oreo. Nougat has
no shm headers.
Fix the build by ifdef'ing out the shm code on Nougat.
Fixes: cf54bd5e8 "drisw: use shared memory when possible"
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@gmail.com>
(cherry picked from commit aaa41cd297)
os.path.exists doesn't return True for stale symlinks, but they are in
the way later, when a link/file with the same name is to be created.
For instance it is conceivable that the pointed to file is replaced by
a file with a new name, and then the symlink is dead.
To handle this check specifically for all existing symlinks to be
removed. (This bugged me for some time with a link libXvMCr600.so
always being in the way of installing this file)
v2: use only os.lexist and replace all instances of os.exist (Dylan Baker)
v3: handle directory check correctly (Eric Engestrom)
Fixes: f7f1b30f81
("meson: extend install_megadrivers script to handle symmlinking")
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>(v2 minus dir check)
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
(cherry picked from commit 7a46b2d641)
This is needed to ensure that we don't get blocked waiting for VPM space
with bin/render overlapping.
Cc: "18.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 1561e4984e)
Found when debugging register spilling -- we would try to spill the dest
of a STVPMV, inserting spill code after entering the last segment. In
fact, we were likely to to choose to do this, given that the STVPMV "dest"
temp was never read from, making it cheap to spill.
Cc: "18.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f2c0d310d6)
The simulator complained that we had write responses outstanding at shader
end. It seems that a TMU read does not guarantee that previous TMU writes
by the thread have completed, which surprised me.
Cc: "18.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 3f9cb2eb05)
Found while forcing some spilling, which creates a lot of short
tmua->thrsw->ldtmu sequences.
Cc: "18.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit ccbe33af5b)
Up to now we've been lucky that the buffer returned was always exactly
at the address we requested.
Fixes: 144b40db54 ("intel: aubinator: drop the 1Tb GTT mapping")
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
(cherry picked from commit 35955afa7a)
We already guarded all OP_SULDP against out of bound accesses, but we
ended up just reusing whatever value was stored in the dest registers.
Fixes CTS test shader_image_load_store.incomplete_textures
v2: fix for loads not ending up with predicates (bindless_texture)
v3: fix replacing the def
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
(cherry picked from commit c3325097be)
A problem was reported with arm,arm64 targets build due to missing
libLLVM shared library dependency with AOSP; to avoid this issue vulkan.radv
is built conditionally only when radeonsi is in BOARD_GPU_DRIVERS
Fixes: 0ca153f869 ("android: radv: enable build of vulkan.radv HAL module")
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: "18.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 1c7a2433b2)
Zeroing memory after calloc is not necessary. This also allows to avoid
possible crash when allocation fails, because memset is called before
checking screen for NULL.
Fixes: a29d63ecf7 "swr: refactor swr_create_screen to allow
for proper cleanup on error"
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
(cherry picked from commit 9d3a2394e4)
Instead of plain snprintf(). To fix the MSVC 2013 build:
Compiling src\util\u_queue.c ...
u_queue.c
src\util\u_queue.c(325) : warning C4013: 'snprintf' undefined; assuming extern returning int
...
mesautil.lib(u_queue.obj) : error LNK2001: unresolved external symbol _snprintf
scons: building terminated because of errors.
Fixes: b238e33bc9 ("kutil/queue: add a process name into a thread name")
Cc: Marek Olšák <marek.olsak@amd.com>
Cc: Brian Paul <brianp@vmware.com>
Cc: Roland Scheidegger <sroland@vmware.com>
Cc: Timothy Arceri <tarceri@itsqueeze.com>
Cc: Eric Engestrom <eric.engestrom@intel.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Instead of plain snprintf(). To fix the MSVC 2013 build:
Compiling src\gallium\auxiliary\util\u_tests.c ...
u_tests.c
src\gallium\auxiliary\util\u_tests.c(624) : warning C4013: 'snprintf' undefined; assuming extern returning int
...
gallium.lib(u_tests.obj) : error LNK2019: unresolved external symbol _snprintf referenced in function _test_texture_barrier
build\windows-x86-debug\gallium\targets\graw-gdi\graw.dll : fatal error LNK1120: 1 unresolved externals
scons: *** [build\windows-x86-debug\gallium\targets\graw-gdi\graw.dll] Error 1120
scons: building terminated because of errors.
Fixes: 56342c97ee ("gallium/u_tests: test FBFETCH and shader-based blending with MSAA")
Cc: Marek Olšák <marek.olsak@amd.com>
Cc: Brian Paul <brianp@vmware.com>
Cc: Roland Scheidegger <sroland@vmware.com>
Cc: Dieter Nützel <Dieter@nuetzel-hh.de>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
During code review, Jason pointed out that:
2b3064c073 "i965, anv: Use INTEL_DEBUG for disk_cache driver flags"
Didn't account for INTEL_SCALER_* environment variables.
To fix this, let the compiler return the disk_cache driver flags.
Another possible fix would be to pull the INTEL_SCALER_* into
INTEL_DEBUG bits, but as we are currently using 41 of 64 bits, I
didn't think it was a good use of 4 more of these bits. (5 since
INTEL_PRECISE_TRIG needs to be accounted for as well.)
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Shader time hard codes an index of the shader time buffer within the
gen program.
In order to support shader time in the disk shader cache, we'd need to
add the shader time index into the program key. This should work, but
probably is not worth it for this particular debug feature.
Therefore, let's just disable the disk shader cache if the shader time
debug feature is used.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106382
Fixes: 96fe36f7ac "i965: Enable disk shader cache by default"
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Fixes new piglit test:
tests/spec/glsl-1.20/execution/qualifiers/vs-out-conversion-int-to-float-vec4-index.shader_test
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Instead of just looking at the number of color attachments, look at
which ones are actually used by the subpass. This lets us potentially
throw away chunks of the fragment shader. In DXVK, for example, all
subpasses have 8 attachments and most are VK_ATTACHMENT_UNUSED so this
is very helpful in that case.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
The back-end compiler emits the number of color writes specified by
wm_prog_key::nr_color_regions regardless of what nir_store_outputs we
have. Once we've gone through and figured out which render targets
actually exist and are written by the shader, we should restrict the key
to avoid extra RT write messages.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
With the new deref instructions, we have to keep the modes consistent
between the derefs and the variables they reference. Since we remove
outputs by changing them to local variables, we need to run the fixup
pass to fix the modes.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
The NIR nir_lower_io_arrays_to_elements pass attempts to split I/O
variables which are arrays or matrices into a sequence of separate
variables. This can help link-time optimization by allowing us to
remove varyings at a more granular level.
Shader-db results on Kaby Lake:
total instructions in shared programs: 15177645 -> 15168494 (-0.06%)
instructions in affected programs: 79857 -> 70706 (-11.46%)
helped: 392
HURT: 0
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Otherwise, only the first vec4 of a matrix or other complex type will
get marked as flat and we'll interpolate the others. This was caught by
a dEQP test which started failing because it did a SSO vs. non-SSO
comparison. Previously, we did the interpolation wrong consistently in
both versions. However, with one of Tim Arceri's NIR linkingpatches, we
started splitting the matrix input into vectors at link time in the
non-SSO version and it started getting correctly interpolated which
didn't match the broken SSO version. As of this commit, they both get
correctly interpolated.
Fixes: e61cc87c75 "i965/fs: Add a flat_inputs field to prog_data"
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
By including the proper headers for getpid and for mkdir.
Fixes: 6ff0c6f4eb
("gallium: move ddebug, noop, rbug, trace to auxiliary to improve build times")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
On windows process.h is a system provided header, and it's required in
include/c11/threads_win32.h. This header interferes with searching for
that header, and results in windows build warnings with scons, but
errors in meson which doesn't allow implicit function declarations. Just
rename process to u_process, which follows the style of utils anyway.
Fixes: 2e1e6511f7
("util: extract get_process_name from xmlconfig.c")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
To make dEQP-GLES31.functional.ssbo.layout.random.all_shared_buffer.23
finish sooner on the older CPUs. (otherwise it gets killed and we fail
the test)
Acked-by: Dave Airlie <airlied@gmail.com>
I missed an important part when porting the change over, fixing my
compiler warning but breaking -Werror=format-security.
Fixes: e6ff5ac446 ("v3d: use snprintf(..., "%s", ...) instead of strncpy")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107443
CXXLD gallium_dri.la
../../../../src/gallium/drivers/vc4/.libs/libvc4.a(vc4_cl_dump.o): In function `vc4_dump_cl':
src/gallium/drivers/vc4/vc4_cl_dump.c:45: undefined reference to `clif_dump_init'
src/gallium/drivers/vc4/vc4_cl_dump.c:82: undefined reference to `clif_dump_destroy'
../../../../src/broadcom/cle/.libs/libbroadcom_cle.a(cle_libbroadcom_cle_la-v3d_decoder.o): In function `v3d_field_iterator_next':
src/broadcom/cle/v3d_decoder.c:902: undefined reference to `clif_lookup_bo'
Fixes: e92959c4e0 ("v3d: Pass the whole clif_dump structure to v3d_print_group().")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107423
CC: Eric Anholt <eric@anholt.net>
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Andres Gomez <agomez@igalia.com>
The ubuntu version provided by Travis is a bit old, and does not detect
correctly some C functions.
Use a more modern version through scons.
Reviewed-by: Andres Gomez <agomez@igalia.com>
Gen10+ has an additional bit in MI_BATCH_BUFFER_END to signal the end
of the context image.
We select the largest size for the context image regardless of the
generation.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Python 2 had string_escape and unicode_escape codecs. Python 3 only has
the latter. These work the same as far as we're concerned, so let's use
the future-proof one.
However, the reste of the code expects unicode strings, so we need to
decode them again.
Signed-off-by: Mathieu Bridon <bochecha@daitauha.fr>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Python 2 had two integer types: int and long. Python 3 dropped the
latter, as it made the int type automatically support bigger numbers.
As a result, Python 3 lost the 'L' suffix on integer litterals.
This probably doesn't make much difference when compiling the generated
C code, but adding it explicitly means that both Python 2 and 3 generate
the exact same C code anyway, which makes it easier to compare and check
for discrepencies when moving to Python 3.
Signed-off-by: Mathieu Bridon <bochecha@daitauha.fr>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
In both Python 2 and 3, zlib.Compress.compress() takes a byte string,
and returns a byte string as well.
In Python 2, the script was working because:
1. string literalls were byte strings;
2. opening a file in unicode mode, reading from it, then passing the
unicode string to compress() would automatically encode to a byte
string;
On Python 3, the above two points are not valid any more, so:
1. zlib.Compress.compress() refuses the passed unicode string;
2. compressed_data, defined as an empty unicode string literal, can't be
concatenated with the byte string returned by compress();
This commit fixes this by explicitly using byte strings where
appropriate, so that the script works on both Python 2 and 3.
Signed-off-by: Mathieu Bridon <bochecha@daitauha.fr>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
The latter is a constructor for file objects, but when actually opening
a file, using the former is more idiomatic.
In addition, file() is not a builtin any more in Python 3, so this makes
the script compatible with both Python 2 and Python 3.
Signed-off-by: Mathieu Bridon <bochecha@daitauha.fr>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
The XML parser wants byte strings, not unicode strings.
In both Python 2 and 3, opening a file without specifying the mode will
open it for reading in text mode ('r').
On Python 2, the read() method of the file object will return byte
strings, while on Python 3 it will return unicode strings.
Explicitly specifying the binary mode ('rb') makes the behaviour
identical in both Python 2 and 3, returning what the XML parser
expects.
Signed-off-by: Mathieu Bridon <bochecha@daitauha.fr>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
The hex() builtin returns a string containing the hexa-decimal
representation of an integer.
When the argument is not an integer, then the function calls that
object's __hex__() method, if one is defined. That method is supposed to
return a string.
While that's not explicitly documented, that string is supposed to be a
valid hexa-decimal representation for a number. Python 2 doesn't enforce
this though, which is why we got away with returning things like
'NIR_TRUE' which are not numbers.
In Python 3, the hex() builtin instead calls an object's __index__()
method, which itself must return an integer. That integer is then
automatically converted to a string with its hexa-decimal representation
by the rest of the hex() function.
As a result, we really can't make this compatible with Python 3 as it
is.
The solution is to stop using the hex() builtin, and instead use a hex()
object method, which can return whatever we want, in Python 2 and 3.
Signed-off-by: Mathieu Bridon <bochecha@daitauha.fr>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
In Python 2, iterating over a byte-string yields single-byte strings,
and we can pass them to ord() to get the corresponding integer.
In Python 3, iterating over a byte-string directly yields those
integers.
Transforming the byte string into a bytearray gives us a list of the
integers corresponding to each byte in the string, removing the need to
call ord().
This makes the script compatible with both Python 2 and 3.
Signed-off-by: Mathieu Bridon <bochecha@daitauha.fr>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Detect if the display (X-Server) gpu and Prime renderoffload gpu prefer
different channel ordering for color depth 30 formats ([X/A]BGR2101010
vs. [X/A]RGB2101010) and perform format conversion during the blitImage()
detiling op from tiled backbuffer -> linear buffer.
For this we need to find the visual (= red channel mask) for the
X-Drawable used to display on the server gpu. We use the same proven
logic for finding that visual as in commit "egl/x11: Handle both depth
30 formats for eglCreateImage()".
This is mostly to allow "NVidia Optimus" at depth 30, as Intel/AMD
gpu's prefer xRGB2101010 ordering, whereas NVidia gpu's prefer
xBGR2101010 ordering, so we can offload to nouveau without getting
funky colors.
Tested on Intel single gpu, NVidia single gpu, Intel + NVidia prime
offload with DRI3/Present.
Note: An unintended but pleasant surprise of this patch is that it also
seems to make the modesetting-ddx of server 1.20.0 work at depth 30
on nouveau, at least with unredirected "classic" X rendering, and
with redirected desktop compositing under XRender accel, and with OpenGL
compositing under GLX. Only X11 compositing via OpenGL + EGL still gives
funky colors. modesetting-ddx + glamor are not yet ready to deal with
nouveau's ABGR2101010 format, and treat it as ARGB2101010, also exposing
X-visuals with ARGB2101010 style channel masks. Seems somehow this triggers
the logic in this patch on modesetting-ddx + depth 30 + DRI3 buffer sharing
and does the "wrong" channel swizzling that then cancels out the "wrong"
swizzling of glamor and we end up with the proper pixel formatting in
the scanout buffer :). This so far tested on a NVA5 Tesla card under KDE5
Plasma as shipping with Ubuntu 16.04.4 LTS.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
We need to distinguish if the backing storage of a pixmap
is XRGB2101010 or XBGR2101010, as different gpu hw supports
different formats. NVidia hw prefers XBGR, whereas AMD and
Intel are happy with XRGB.
Use the red channel mask of the first depth 30 visual of
the x-screen to distinguish which hw format to choose.
This fixes desktop composition of color depth 30 windows
when the X11 compositor uses EGL.
v2: Switch from using the visual of the root window to simply
using the first depth 30 visual for the x-screen, as testing
shows that each driver only exports either xrgb ordering or
xbgr ordering for the channel masks of its depth 30 visuals,
so this should be unambiguous and avoid trouble if X ever
supports depth 30 pixmaps on screens with a non-depth 30 root
window visual. This per Michels suggestion.
v3: No change to v2, but spent some time testing this more on
AMD hw, with my software hacked up to intentionally choose
pixel formats/visual with the non-preferred xBGR2101010
ordering on the ati-ddx, also with a standard non-OpenGL
X-Window with depth 30 visual, to make sure that things show
up properly with the right colors on the screen when going
through EGL+OpenGL based compositing on KDE-5. Iow. to confirm
that my explanation to the v2 patch on the mailing list of why
it should work and the actual practice agree (or possibly that
i am good at fooling myself during testing ;).
v4: Drop the local `red_mask` and just `return visual->red_mask`/
`return 0`, as suggested by Eric Engestrom.
Rebased onto current master, to take the cleanup via the new
function dri2_format_for_depth() into account.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
The hardware doesn't support byte immediates, so similar to setup_imm_df()
for doubles, these helpers work by loading the constant value into a
VGRF.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This fixes the following dEQP-GLES31 cases from NotSupported to
Pass for me:
- dEQP-GLES31.functional.blend_equation_advanced.state_query.*
- dEQP-GLES31.functional.blend_equation_advanced.basic.*
- dEQP-GLES31.functional.blend_equation_advanced.srgb.*
- dEQP-GLES31.functional.blend_equation_advanced.msaa.*
- dEQP-GLES31.functional.blend_equation_advanced.barrier.*
- dEQP-GLES31.functional.draw_buffers_indexed.overwrite_*advanced_blend_eq*
- dEQP-GLES31.functional.state_query.indexed.blend_equation_advanced_*
- dEQP-GLES31.functional.debug.negative_coverage.*.advanced_blend.*
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In gallium, supporting FBFETCH means supporting non-coherent fetches, but
in virglrenderer, due to technical reasons this is backed by coherent
fetches instead. This means we don't need to do anything for the barriers.
However, if we don't have a texture_barrier implementation, we get crashes
because the non-coherent extensions is exposed.
So, let's leave this as a NOP for now.
[airlied: I've got a more complete impl of this somewhere, once we
land the host side].
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
This instruction is used to ensure that TMU stores have been processed
before moving on. In particular, you need any TMU ops to be done by the
time the shader ends.
When texture buffers are used as images in compute shaders, the guest
never sees the modified data since the TBO is always marked as clean.
Fixes most dEQP-GLES31.functional.image_load_store.buffer.* tests.
Example test cases:
dEQP-GLES31.functional.image_load_store.buffer.load_store.r32ui
dEQP-GLES31.functional.image_load_store.buffer.qualifiers.coherent_r32f
dEQP-GLES31.functional.image_load_store.buffer.format_reinterpret.rgba8_rgba8ui
Note: virglrenderer side patch also needed to bind TBOs correctly
Reviewed-by: Dave Airlie <airlied@redhat.com>
Make glXChooseFBConfig properly handle the case where the only matching
configs have the sRGB flag set, but no sRGB attribute is specified.
Since 6e06e281, the sRGBcapable flag is now actually compared, using
MATCH_DONT_CARE.
7b0f912e added defaulting of sRGBcapable to GL_FALSE in
__glXInitializeVisualConfigFromTags(), to handle servers which don't report
it, but this function is also used by glXChooseFBConfig(), so sRGBcapable is
implicitly false when not explicitly specified.
(This can cause e.g. glxinfo to fail to find anything matching the simple
config it looks for if all the candidates have the sRGB flag set to true.
I'm assuming this doesn't happen 'normally' as candidate configs with and
without sRGB true are available)
Move this defaulting to createConfigsFromProperties(), and set the default
for glXChooseFBConfig() in init_fbconfig_for_chooser() to GLX_DONT_CARE.
Reviewed-by: Eric Anholt <eric@anholt.net>
get_supported_modifiers() and pixmap_from_buffers() requests both
expect a window as drawable, passing a pixmap will fail as the Xserver
will fail to match the given drawable to a window.
That leads to dri3_alloc_render_buffer() to return NULL and breaks
rendering when using GLX_DOUBLEBUFFER on pixmaps.
Query the root window of the pixmap on first init, and use the root
window instead of the pixmap drawable for get_supported_modifiers()
and pixmap_from_buffers().
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107117
Fixes: 069fdd5 ("egl/x11: Support DRI3 v1.1")
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
v2: ignore names on purpose, for consistency with other places where
we are doing the same (Alejandro)
v3: changes proposed by Timothy Arceri, implemented by Alejandro Piñeiro:
* Remove redundant 'struct active_xfb_varying'
* Update several comments, including spec quotes if needed
* Rename struct 'active_xfb_varying_array' to 'active_xfb_varyings'
* Rename variable 'array' to 'active_varyings'
* Replace one if condition for an assert (<MAX_FEEDBACK_BUFFERS)
* Remove BufferMode initialization (was already done)
v4: simplify output pointer handling (Timothy)
Signed-off-by: Neil Roberts <nroberts@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
For now we are just adding nir lowerings that are needed/mandatory to
get things working. After everything is settled, we would start to add
good-to-have lowerings.
This patch adds the following calls:
* nir_split_var_copits and nir_split_per_member_structs: as vulkan
drivers are doing now. See commit
b0c643d8f5 ("spirv: Use NIR
per-member splitting") for more info.
Without this commit, piglit tests like this crashes:
spec/arb_gl_spirv/execution/varying/block
And in general most of the shaders that includes any kind of
struct.
* nir_copy_prop: after nir_deref_instr introduction, function calls
need this. See commit "nir,spirv: Rework function calls"
(c11833ab24) for more info.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Whenever a non-zero stream is written to it now sets uses_streams to
true. This reflects the code in validate_geometry_shader_emissions for
GLSL.
v2: set uses_streams at gather_info instead that at spirv to nir
(Jason Ekstrand)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
It looks like it was previously taking the SPIR-V instruction number
directly instead of looking up the constant value.
v2: use vtn_constant_value helper (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
From SPIR-V 1.0 spec, section 3.20, "Decoration":
"Stream
Apply to an object or a member of a structure type. Indicates the
stream number to put an output on."
Note the "or", so that means that it is allowed for both a full struct
or a membef or a struct (although the wording is not really ideal, and
somewhat error-prone, imho).
We found this with some Geometry Streams tests for ARB_gl_spirv, where
the full gl_PerVertex is assigned Stream 0 (default value on OpenGL
for gl_PerVertex).
So this commit allows structs to have this Decoration, and sets the
stream at the nir variable if needed.
Signed-off-by: Neil Roberts <nroberts@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
v2: squash two Decoration Stream patches (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
These set the new explicit XFB members on nir_variable.
This is needed to support ARB_gl_spirv, as Vulkan doesn't support
transform feedback.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
These are copied from the from the corresponding values in
ir_variable. The intention is to eventually use them in a pure-NIR
linker.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Allow platform_surfaceless to use swrast even if DRM is not available.
To be used to allow a fuzzer for virgl to be run on a jailed VM without
hardware GL or DRM support.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Signed-off-by: David Riley <davidriley@chromium.org>
A V3D_DEBUG=clif file from a non-texturing .shader_test can now be
successfully run through the CLIF runner in the simulator. Now I need to
build an open source CLIF runner against the v3d DRM module.
We need to dump each buffer's contents in order for a CLIF file, so we
need to collect all of the relocs into a buffer (such as the indirect CL
full of both uniforms and GL shader states) before we start dumping.
These will match the names that the CLIF parser expects to see. I may in
the future decide to change more of the other names so that I match the
names the HW/closed SW team uses for their packets, rather than the names
in the spec (which only they and I can read anyway).
This matches what CLIF parsing expects, and makes
TILE_BINNING_MODE_CONFIGURATION_COMMON_CONFIGURATION into a much more
legible TILE_BINNING_MODE_CFG_COMMON.
The CLIF format expects american english spelling, and the rest of Mesa is
too. I was previously adhering to the spec's spelling, which is
counterproductive.
A few of the upcoming changes would make the V3D_DEBUG=cl output less
readable, so let's make proper CLIF file production be under a separate
V3D_DEBUG=clif flag.
V3D only has one of these (the top 16 bits of a float32) left in its CLs,
but VC4 had many more. This gets us proper pretty-printing of the values
instead of a large uint.
I copied this value from radeonsi, but it was wrong, 1024
seems to be correct answer from looking at gpuinfo.
This should fix a few compute shader related hangs. (at least in CTS)
Cc: <mesa-stable@lists.freedesktop.org>
(airlied: pushed because it avoids hangs)
To avoid serializing, this has the user constant buffer always be 65536
bytes and enabled unless it's required that something else is used for
constant buffer 0.
Fixes artifacts with at least XCOM: Enemy Within, 0 A.D. and Unigine
Valley, Heaven and Superposition.
v2: changed uniform_buffer_bound to be bool instead of a uint32_t
v3: remove magic constants
v3: remove pointless code in nvc0_validate_driverconst
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100177
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
The kernel by default serializes the BCL on previous BCLs submitted on
this FD, but not RCLs. For now this fix is conservative and blocks on
last RCL if any vertex texturing is done, which fails to get bin/render
overlap if there was an intermediate job that doesn't draw to the BCL's
buffer. I've dropped a perf_debug() in here to note that as a potential
future improvement.
Fixes intermittent failures in
KHR-GLES3.copy_tex_image_conversions.required.*
We weren't returning at the end of the nir_isntr_type_deref case in
nir_instrs_equal and it was falling through to the default of false.
While we're at it, make the default unreachable because all statements
in the switch now have their own returns. Had we done that before, we
would have caught this bug a long time ago.
Fixes: 19a4662a54 "nir: Add a deref instruction type"
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Thomas Helland<thomashelland90@gmail.com>
We no longer have semi-custom clear pipe that uses 3d state. Normal
clears happen via hw blitter, and everything else uses u_blitter these
days. So we don't need this hack.
TODO a3xx+a4xx could get same treatment.
Signed-off-by: Rob Clark <robdclark@gmail.com>
v2: use nir_metadata_preserve
preserve metadata in case of !progress
Fixes: 074f5ba0b5
"nir: Add a simple int64 lowering pass"
Signed-off-by: Karol Herbst <kherbst@redhat.com>
radv implements the Android Vulkan HAL interface, this patch adds
Android.mk building rules by porting of radv automake rules.
vendor HAL module is installed as /vendor/lib/hw/vulkan.radv.so
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Patch changes radv entrypoints generator to not skip this extension even
though it is set as disabled in the vk.xml
Reference: 63525ba730 ("android: enable VK_ANDROID_native_buffer")
Fixes: 69f447553c ("vulkan: Drop vk_android_native_buffer.xml")
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Android build system will try to compile vk_format_table.c
as a shipped source, but at compile time it will be missing,
we move it to generated source, where it belongs
Fixes: f4e499ec79 ("radv: add initial non-conformant radv vulkan driver")
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The xlib/swrast driver only supports GL 2.1. This patch fixes a
crash if the app calls glGetString(GL_SHADING_LANGUAGE_VERSION).
Reviewed-by: Neha Bhende <bhenden@vmware.com>
By default after saying you are emitting a buffer, it'll expect a buffer
size. Once you set a format, it'll keep parsing that format until you
announce something else.
Previously, we emitted in XML order, which I happen to type in the
decreasing offset order of the specifications. However, the CLIF parser
wants increasing offsets.
With CLIFs, the parser will choose an address for the buffer being
created, so we need to use effectively relocations to buffers instead of
the addresses that the driver uses. This is also a whole lot more
intelligible for console output than raw addresses!
To generate CLIF files that the v3dv3 simulator can parse, we're going to
need to decode addresses, and for that we'll need the vaddr lookup
function from the clif structure from within v3d_decoder.
Looks like a mistake from when the deref stuff landed.
Fixes: 506a07e4e3 ("ac/nir: Add deref support to image intrinsics.")
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This will be used by indirect multidraws.
v2: clean up the function further, change return types to unsigned
Reviewed-by: Eric Anholt <eric@anholt.net> (v1)
If we have tracing enabled we could do all the tracing emits
and overflow the precalculated cdw_max.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
The code sizes return here get passed to the cache shader insert function,
which then memcpy from the code ptr, and causes all sorts of valgrind
errors like:
==6755== Invalid read of size 8
==6755== at 0x4C32FEE: memcpy@GLIBC_2.2.5 (vg_replace_strmem.c:1021)
==6755== by 0x2305D4C7: radv_pipeline_cache_insert_shaders (radv_pipeline_cache.c:416)
==6755== by 0x2305791D: radv_create_shaders (radv_pipeline.c:2158)
==6755== by 0x2305C523: radv_pipeline_init (radv_pipeline.c:3404)
==6755== by 0x2305C890: radv_graphics_pipeline_create (radv_pipeline.c:3515)
==6755== by 0x230188AB: radv_device_init_meta_blit_color (radv_meta_blit.c:871)
==6755== by 0x2301D50E: radv_device_init_meta_blit_state (radv_meta_blit.c:1278)
==6755== by 0x23011893: radv_device_init_meta (radv_meta.c:352)
==6755== by 0x2300744B: radv_CreateDevice (radv_device.c:1576)
==6755== by 0x5187D0F: ??? (in /usr/lib64/libvulkan.so.1.1.77)
==6755== by 0x518F6A3: ??? (in /usr/lib64/libvulkan.so.1.1.77)
==6755== by 0x5192A42: vkCreateDevice (in /usr/lib64/libvulkan.so.1.1.77)
==6755== Address 0x22a58548 is 4 bytes after a block of size 116 alloc'd
==6755== at 0x4C2EBAB: malloc (vg_replace_malloc.c:299)
==6755== by 0x23089DC4: ac_elf_read (ac_binary.c:144)
==6755== by 0x23090A60: ac_compile_module_to_binary (ac_llvm_helper.cpp:162)
==6755== by 0x23053F06: compile_to_memory_buffer (radv_llvm_helper.cpp:58)
==6755== by 0x23053F06: radv_compile_to_binary (radv_llvm_helper.cpp:98)
==6755== by 0x23052769: ac_llvm_compile (radv_nir_to_llvm.c:3394)
==6755== by 0x23052823: ac_compile_llvm_module (radv_nir_to_llvm.c:3418)
==6755== by 0x23053C05: radv_compile_nir_shader (radv_nir_to_llvm.c:3542)
==6755== by 0x23061B4E: shader_variant_create (radv_shader.c:580)
==6755== by 0x23061CFD: radv_shader_variant_create (radv_shader.c:634)
==6755== by 0x23057765: radv_create_shaders (radv_pipeline.c:2123)
==6755== by 0x2305C523: radv_pipeline_init (radv_pipeline.c:3404)
==6755== by 0x2305C890: radv_graphics_pipeline_create (radv_pipeline.c:3515)
Since we are just inserting the code into the cache, we can avoid these
bad reads and data in the cache by just using the binary code size here.
Fixes: 939e5a382 (radv: add padding for the UMR disassembler)
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
The kernel's scheduler doesn't rely on our emitting them, and in fact we'd
get in trouble if the kernel decided to schedule too many bins in a row
before getting around to scheduling the corresponding render.
This reflects a change on the HW/closed SW side to drop this unused HW.
With it dropped on their side, the CLIF parser no longer expects to find
VG fields.
Instead of using _mesa_is_winsys_fbo or
_mesa_is_user_fbo to infer if an fbo is
flipped use the FlipY flag.
v2:
* additional window-system framebuffer checks [for jason]
v3:
* s/inverted_y/flip_y/g [for chadv]
* s/InvertedY/FlipY/g [for chadv]
Reviewed-by: Chad Versace <chadversary@chromium.org>
Adds an extension to glFramebufferParameteri
that will specify if the framebuffer is vertically
flipped. Historically system framebuffers are
vertically flipped and user framebuffers are not.
Checking to see the state was done by looking at
the name field. This adds an explicit field.
v2:
* updated spec language [for chadv]
* correctly specifying ES 3.1 [for chadv]
* refactor access to rb->Name [for jason]
* handle GetFramebufferParameteriv [for chadv]
v3:
* correct _mesa_GetMultisamplefv [for kusmabite]
v4:
* update spec language [for chadv]
* s/GLboolean/bool/g [for chadv]
* s/InvertedY/FlipY/g [for chadv]
* s/inverted_y/flip_y/g [for chadv]
* assert changes [for chadv]
Reviewed-by: Chad Versace <chadversary@chromium.org>
Problem 1: u_debug_stack_android.cpp transitively included
"pipe/p_compiler.h", but src/gallium/include was missing from the C++
include path.
Problem 2: Add -std=c++11 to AM_CXXFLAGS. Android's libbacktrace headers
require C++11, but the Android toolchain (at least in the Chrome OS SDK)
does not enable C++11 by default.
v2: Add -std=c++11.
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Cc: Eric Engestrom <eric.engestrom@intel.com>
Gen 11 workarounds table #2056 WABTPPrefetchDisable suggests to
disable prefetching of binding tables for ICLLP A0 and B0
steppings. It fixes multiple gpu hangs in
ext_framebuffer_multisample* tests on ICLLP B0 h/w.
Anuj: Add comments and commit message.
Add gen 11 checks in the code.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Now that the elements version handles both cases, remove the
non-elements version.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Thomas Helland <thomashelland90@gmail.com>
Keep information in acp_entry whether the entry is full or not, and
use the ACP in more nodes when visiting the instructions:
- add_copy: write whole variables to the ACP state (regardless the
type).
- visit(ir_dereference_variable *): perform the propagation here if we have a
full candidate. Element-wise here doesn't apply because the mask
isn't available at this point.
- visit_leave(ir_assignment *): process beyond scalar and vector, as
the full variables might have other types.
Also import an improvement from opt_copy_propagation.cpp: if ir_call
is an intrinsic, we know the variables affected, so keep going.
v2: (all from Eric Anholt)
Describe how acp_entry attributes are used.
Don't do book-keeping to avoid adding repeated element to
the dsts in write_elements().
v3: Use _mesa_set_remove_key. (Thomas Helland)
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Thomas Helland <thomashelland90@gmail.com>
The pass can create a temporary result for the instruction and then
moves from it to the original destination, however, if the original
instruction was predicated, the mov has to be predicated as well.
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
This wasn't wrong but it looks better to me like this. It's
only used for debugging purposes (ie. RADV_TRACE_FILE).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Until now, we had separate passes for lowering gl_PatchVerticesIn to
a statically known constant (for TES inputs when linked against a TCS),
and a uniform in the other cases. Annoyingly, one had to be run before
nir_lower_system_values, and the other afterward. This simplified the
passes, but made life painful for the callers.
This patch combines both into a single pass. If you give it a non-zero
static count, it uses that. If you give it Mesa state slots, it turns
it back into a built-in uniform. Otherwise, it does nothing.
This also moves the i965 uniform lowering out to shared code.
v2: Make token arrays const.
Reviewed-by: Eric Anholt <eric@anholt.net>
The extension requires at least OpenGL 3.0 and
OpenGL ES 3.0.
Fixes two ext_base_instance tests:
arb_base_instance-baseinstance-doesnt-affect-gl-instance-id_gles3
arb_base_instance-drawarrays_gles3
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
It's OK to pass them in memory, which is what kernel invocation needs.
Fixes regressions since llvm r337535 ("Reapply "AMDGPU: Fix handling of alignment padding in DAG argument lowering"):
scalar-arithmetic-char
scalar-arithmetic-uchar
scalar-arithemtic-short
scalar-arithmetic-ushort
scalar-comparison-char
scalar-comparison-uchar
scalar-comparison-short
scalar-comparison-ushort
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
These are lowered by brw_nir_lower_vs_inputs(). If they weren't, we
would have already hit the unreachable() in emit_system_values_block().
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This seems like a sensible precaution to avoid extra draws. It doesn't
deal with the case of a Z24S8 buffer created by the window system for an
application that happens to never use S.
First, figure out if we can just sneak the clear into the TLB clear, even
if drawing has already happened (since we have job->load and job->clear to
tell us), taking into account GFXH-1461. For any pieces we can't TLB
clear, fall back to drawing a quad without flushing the scene.
Fixes extra scene flushes in glmark2 due to GFXH-1461.
We were computing this at RCL generation time, but that means you can't
unflag the store for an invalidate_resource, or not flag the store if
writmasking is disabled.
These describe what the fields mean in RCL generation. "resolve" is left
over from VC4, and sounds like MSAA resolves (which may or may not be
involved in the store we generate).
This is controlled by a new nir_shader_compiler_options flag, and fixes
dEQP-GLES3.functional.shaders.builtin_variable.pointcoord on V3D.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Seems something went wrong somehow when it was pushed.
v2: combine into one list
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Marek OIšák <marek.olsak@amd.com>
When this bit was added, it seems the some initialization code
was omitted by mistake.
Since stack-variables have kinda random contents, and we don't
zero initialize the whole struct in these code-paths, we end up
getting random-ish values for this bit.
Spotted by Coverity in the following CIDs:
- 1438115
- 1438123
- 1438130
Fixes: 70425bcfe6 ("gallium: plumb
invariant output attrib thru TGSI")
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Jakob Bornecrantz <jakob@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Move the integer conversion after the fixup.
This fixes some regressions with
dEQP-VK.pipeline.vertex_input.single_attribute.mat4.as_a2r10g10b10*
Fixes: b722b29f10 ("radv: add support for 16bit input/output")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This breaks printing input/output variables with more than
4 components like mat4.
Fixes: 1beef89ad8 ("nir: prepare for bumping up max components to 16")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The various base addresses are simply addresses. There may or may not
be a buffer located at those addresses. So, it doesn't make much sense
to request one. Just save the raw address so we can add it later, when
asking about BOs at the final <base + offset> address.
Suggested-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Normally, i965 programs STATE_BASE_ADDRESS every batch, and puts all
state for a given base in a single buffer.
I'm working on a prototype which emits STATE_BASE_ADDRESS only once at
startup, where each base address is a fixed 4GB region of the PPGTT.
State may live in many buffers in that 4GB region, even if there isn't
a buffer located at the actual base address itself.
To handle this, we need to save the STATE_BASE_ADDRESS values across
multiple batches, rather than assuming we'll see the command each time.
Then, each time we see a pointer, we need to ask the driver for the BO
map for that data. (We can't just use the map for the base address, as
state may be in multiple buffers, and there may not even be a buffer
at the base address to map.)
v2: Fix things caught in review by Lionel:
- Drop bogus bind_bo.size check.
- Drop "get the BOs again" code - we just get the BOs as needed
- Add a message about interface descriptor data being unavailable
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
CovID: 1438132
Fixes: a99c9e63a0 "anv: finish the binding_table_pool on
destroyDevice when use_softpin"
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
CovID: 1438113, 1438118, 1438119, 1438121
Fixes: dc1d10b396 "anv,radv: Add support for VK_KHR_get_display_properties2"
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This wasn't updated for the new scalar ISA parameter. It worked anyway
because all the function's callers live in the same file, so it found
the correct function. Tim made this external for the new st prog_to_nir
translator, which got reverted, but which I'd like to land eventually.
So, fix the prototype.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
It seems the hardware always expects floating point border color values
[0,1] for unsigned, and [-1,1] for signed texture component, regardless
of pixel type, but the border colors are passed according to texture
component type. Hence, before submitting the border color, convert and
scale it these ranges accordingly.
This doesn't seem to work for textures with 32 bit integer components
though, here, it seems that the border color is always set to zero,
regardless of the BORDER_COLOR_TYPE state set in Q_TEX_SAMPLER_WORD0_0.
v2: Simplyfy logic as suggested by Roland Schneidegger
Fixes:
dEQP-GLES31.functional.texture.border_clamp.formats.compressed*
dEQP-GLES31.functional.texture.border_clamp.formats.r* (non 32 bit integer)
dEQP-GLES31.functional.texture.border_clamp.per_axis_wrap_mode.texture_2d*
and a number of piglits out of
piglit run gpu -t texture -t gather -t formats
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Since various options within INTEL_DEBUG could impact code generation,
we need to set the disk cache driver_flags parameter based on the
INTEL_DEBUG flags in use.
An example that will affect the program generated by i965 is the
INTEL_DEBUG=nocompact option.
The DEBUG_DISK_CACHE_MASK value is added to mask the settings of
INTEL_DEBUG that can affect program generation.
v2:
* Use driver_flags (Tim)
* Also update Anvil (Jason)
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This extra character should not be used by snprintf, but we make it
available to verify that we printed the exact number we wanted, and
didn't overflow.
v2:
* Also update Anvil
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
we need rounding modes on other conversions involving floats and it is easier
to rename f2f16_undef than renaming all the other ones.
v2: rebased on master
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
also move some of the GLSL builtins over we will need for implementing
some OpenCL builtins
v2: replace NIR_IMM_FP by nir_imm_floatN_t in ported code
fix up changes caused by swizzle rework
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Lightly edited to be valid 'C' code.
Is there a bug open to fix this upstream?
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Python 2 has a range() function which returns a list, and an xrange()
one which returns an iterator.
Python 3 lost the function returning a list, and renamed the function
returning an iterator as range().
As a result, using range() makes the scripts compatible with both Python
versions 2 and 3.
Signed-off-by: Mathieu Bridon <bochecha@daitauha.fr>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
In Python 2, iterators had a .next() method.
In Python 3, instead they have a .__next__() method, which is
automatically called by the next() builtin.
In addition, it is better to use the iter() builtin to create an
iterator, rather than calling its __iter__() method.
These were also introduced in Python 2.6, so using it makes the script
compatible with Python 2 and 3.
Signed-off-by: Mathieu Bridon <bochecha@daitauha.fr>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
In Python 2, dict.keys() and dict.values() both return a list, which can
be sorted in two ways:
* l.sort() modifies the list in-place;
* sorted(l) returns a new, sorted list;
In Python 3, dict.keys() and dict.values() do not return lists any more,
but iterators. Iterators do not have a .sort() method.
This commit moves the build scripts to using sorted() on dict keys and
values, which makes them compatible with both Python 2 and Python 3.
Signed-off-by: Mathieu Bridon <bochecha@daitauha.fr>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
In Python 2, dictionaries have 2 sets of methods to iterate over their
keys and values: keys()/values()/items() and iterkeys()/itervalues()/iteritems().
The former return lists while the latter return iterators.
Python 3 dropped the method which return lists, and renamed the methods
returning iterators to keys()/values()/items().
Using those names makes the scripts compatible with both Python 2 and 3.
Signed-off-by: Mathieu Bridon <bochecha@daitauha.fr>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Most functions in the builtin string module also exist as methods of
string objects.
Since the functions were removed from the string module in Python 3,
using the instance methods directly makes the code compatible with both
Python 2 and Python 3.
Signed-off-by: Mathieu Bridon <bochecha@daitauha.fr>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Until now, the needed bits were wrongly included in linux/memfd.h
Since Travis' sys/syscall.h doesn't provide the SYS_memfd_create, we
generate that header manually, including the needed bits to avoid
compilation problems, as the ones observed after:
3228335b55 ("intel: aubinator: handle GGTT mappings")
v2: replace fixes commit with the first direct user of
syscall.h (Emil).
Fixes: 3228335b55 ("intel: aubinator: handle GGTT mappings")
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Juan A. Suarez Romero <jasuarez@igalia.com>
Cc: Dylan Baker <dylan.c.baker@intel.com>
Cc: Eric Engestrom <eric.engestrom@intel.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
New versions of virglrenderer supports the precise-flag, so let's
forward it from TGSI if that's the case.
This fixes a few dEQP-GLES31 tests:
- dEQP-GLES31.functional.tessellation.common_edge.quads_equal_spacing_precise
- dEQP-GLES31.functional.tessellation.common_edge.quads_fractional_even_spacing_precise
- dEQP-GLES31.functional.tessellation.common_edge.quads_fractional_odd_spacing_precise
- dEQP-GLES31.functional.tessellation.common_edge.triangles_equal_spacing_precise
- dEQP-GLES31.functional.tessellation.common_edge.triangles_fractional_even_spacing_precise
- dEQP-GLES31.functional.tessellation.common_edge.triangles_fractional_odd_spacing_precise
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
40% is the decrease in the LGKM counter (which includes SMEM too)
for the GFX9 LSHS stage.
This will make the LDS size slightly larger, but I wasn't able to increase
the patch stride without corruption, so I'm increasing the vertex stride.
R600_DEBUG=gisel will tell LLVM to use GlobalISel rather than
SelectionDAG for instruction selection.
v2: mareko: move the helper to src/amd/common
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Tom Stellard <tstellar@redhat.com>
The original pass only looked for load_uniform intrinsics but there are
a number of other places that could end up loading a push constant. One
obvious omission was images which always implicitly use a push constant.
Legacy VS clip planes also get pushed into the shader. This fixes some
new Vulkan CTS tests that test random combinations of bindings and, in
particular, test lots of UBOs and images together.
Cc: mesa-stable@lists.freedesktop.org
Cc: Kenneth Graunke <kenneth@whitecape.org>
There might be a nicer way to do this, but this is at least correct.
This fixes:
KHR-GL44.tessellation_shader.single.max_patch_vertices
KHR-GL44.tessellation_shader.tessellation_control_to_tessellation_evaluation.gl_PatchVerticesIn
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
Cc: mesa-stable@lists.freedesktop.org
The pt emit path can only handle 65535 - the number of vertices is
truncated to a ushort, resulting in a too small buffer allocation, which
will crash.
Forcing the pipeline path looks suboptimal, then again this bug is
probably there ever since GS is supported, so it seems it's not
happening often. (Note that the vertex_id in the vertex header is 16
bit too, however this is only used by the draw pipeline, and it denotes
the emit vertex nr, and that uses vbuf code, which will only emit smaller
chunks, so should be fine I think.)
Other solutions would be to simply allow 32bit counts for vertex
allocation, however 65535 is already larger than this was intended for
(the idea being it should be more cache friendly). Or could try to teach
the pt emit path to split the emit in smaller chunks (only the non-index
path can be affected, since gs output is always linear), but it's a bit
tricky (we don't know the primitive boundaries up-front).
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=107295
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
This adds the guest side support for ARB_shader_storage_buffer_object.
Co-authors: Gurchetan Singh <gurchetansingh@chromium.org>
v2: move to using separate maximums
(fixup macros)
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
Delegating constructors is a C++11 feature, so this was breaking when
compiling with C++98. Change the copy_propagation_state() calls that
used the convenience constructor to use a static member function
instead.
Since copy_propagation_state is expected to be heap allocated, this
change is a good fit.
Tested-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107305
We can do one per instruction, and we have to be careful not to overwrite
raddr_b, but this greatly reduces the pressure on uniform loads
(particularly around ldvpm/stvpm instructions).
total instructions in shared programs: 90768 -> 88220 (-2.81%)
instructions in affected programs: 82711 -> 80163 (-3.08%)
Sometimes when iterating over sources, we might want to check if it's the
implicit one. We wouldn't want to match on a non-implicit src using this
function.
These instructions let us write directly to the phys regfile, instead of
just R4. That lets us avoid moving out of R4 to avoid conflicting with
other SFU results, and to avoid conflicting with thread switches.
There is still an extra instruction of latency, which is not represented
in the scheduler at the moment. If you use the result before it's ready,
the QPU will just stall, unlike the magic R4 mode where you'd read the
previous value. That means that the following shader-db results aren't
quite representative (since we now cause some stalls instead of emitting
nops), but they're impressive enough that I'm happy with the change.
total instructions in shared programs: 95669 -> 91275 (-4.59%)
instructions in affected programs: 82590 -> 78196 (-5.32%)
Similarly to VC4's implementation, by not picking r0 immediately upon
freeing it, we give the scheduler more of a chance to fit later writes in
earlier. I'm not clear on whether there's any real cost to picking phys
over accumulators, so keep that behavior for now.
shader-db:
total instructions in shared programs: 96831 -> 95669 (-1.20%)
instructions in affected programs: 77254 -> 76092 (-1.50%)
This restriction existed in V3D 2.x, but lifting it was a major change in
3.x.
shader-db results:
total instructions in shared programs: 98117 -> 96831 (-1.31%)
instructions in affected programs: 48520 -> 47234 (-2.65%)
It's actually also a bit safer, since now the compiler will warn if
the string is larger than the `.name` array.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
According to the spec, these should apply to all read/write access
types (so would be equivalent to specifying all other access types
individually). Currently, they were doing nothing.
v2: Handle VK_ACCESS_MEMORY_WRITE_BIT in dstAccessMask.
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
modules[i] can be NULL for merged shaders but we have to
free the NIR code. radv_can_dump_shader_stats() already handles
if modules[i] is NULL, no need to check it twice.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The first fix attempt contained a nasty typo which somehow didn't get
caught in review. It also didn't work as intended because the sRGB
conversion was happening but then throwing away all but the red channel
because it dind't know it was RGB. Really, it's my fault for trying to
fix a bug without first writing tests. I've now written tests and they
pass with this change. :)
Fixes: 11712b9ca1 "intel/blorp: Fix blits to R8G8B8_UNORM_SRGB"
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
We've had several broadwell hangs that have come down to this bit just
not working correctly. Most recently, we've had a pile of hangs
reported with apps running under DXVK:
https://github.com/doitsujin/dxvk/issues/469
Instead, use the bit that doesn't try to imply weird D3D coherency
things and just force-enables the PS like we want.
cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We support mipmapped and arrayed linear images so we need to support
vkGetImageSubresourceLayout on them. Fortunately, it's just a trivial
call into ISL.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This allows NIR to CSE more operations. LLVM does this also so the
impact is limited, however doing this in NIR allows other opts to
make progress. For example some loops in Civilization Beyond Earth
shaders are unrolled.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Note that the use of ICMS_INNER_CONSERVATIVE disagrees with the GL driver.
Perhaps it's more performant than ICMS_NORMAL and is otherwise permitted?
Not sure, so I left it as-is.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This patch applies the necessary changes in Android.common.mk
as per automake rules, to avoid following building error:
external/mesa/src/gallium/drivers/nouveau/nouveau_screen.c:159:8:
error: implicit declaration of function 'disk_cache_get_function_timestamp'
is invalid in C99 [-Werror,-Wimplicit-function-declaration]
if (disk_cache_get_function_timestamp(nouveau_disk_cache_create,
^
1 error generated.
(v2) -DENABLE_SHADER_CACHE Android cflag is kept, to leave the AS-IS capability enabled
Fixes: cc10b34 ("util/disk_cache: Fix disk_cache_get_function_timestamp with disabled cache.")
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The commit 76dfed8ae2 changed nir_intrinsics.h to be a generated
header, but the corresponding dependency was not updated for Android.
It causes the error:
[ 0% 19/4336] target C: libmesa_pipe_radeonsi <= external/mesa/src/gallium/drivers/radeonsi/si_debug.c
...
In file included from external/mesa/src/gallium/drivers/radeonsi/si_debug.c:25:
In file included from external/mesa/src/gallium/drivers/radeonsi/si_pipe.h:28:
In file included from external/mesa/src/gallium/drivers/radeonsi/si_shader.h:140:
In file included from external/mesa/src/amd/common/ac_llvm_build.h:30:
external/mesa/src/compiler/nir/nir.h:966:10: fatal error: 'nir_intrinsics.h' file not found
^~~~~~~~~~~~~~~~~~
1 error generated.
Fixes: 76dfed8ae2 ("nir: mako all the intrinsics")
Signed-off-by: Chih-Wei Huang <cwhuang@linux.org.tw>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Mauro Rossi <issor.oruam@gmail.com>
After optimization passes and many trasfromations most of memory
NIR holds is a garbage which was being freed only after shader deletion.
Freeing it at the end of linking will save memory which would be useful
in case there are a lot of complex shaders being compiled.
The common case for this issue is 32bit game running under Wine.
The cost of the optimization is around ~3-5% of compilation speed
with complex shaders.
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Nothing in EGL_KHR_gl_image.txt seems to let us deny creation based on
formats, and doing so causes many failures in
dEQP-EGL.functional.image.api.*
The NONE value we were protecting from only gets looked at in the
__DRI_IMAGE_ATTRIB_FORMAT and __DRI_IMAGE_ATTRIB_FOURCC queries, which are
used from wayland and gbm (which throw an error cleanly on unknown format)
and DMABUF export.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The EGL CTS expects that you can make images from all sorts of things,
including things like z16 and s8, which we don't have DRM fourccs for.
Just return an error when trying to export one of those.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Recreating our context's syncobj with ALREADY_SIGNALED meant that if you
created two fences in a row, then waiting on the second would succeed
immediately. Instead, export a sync file in the gallium fence (since we
don't have a syncobj clone ioctl), and just create a new syncobj to wait
on whenever we need to.
Noticed while debugging
dEQP-GLES3.functional.fence_sync.client_wait_sync_finish
It tends to return >0 in the success case (I think the value is something
like "how much of the timeout remained"). Fixes
dEQP-GLES3.functional.fence_sync.client_wait_sync_finish
When requesting a texture of the internal format GL_RGB32F Gallium will
try to allocate a renderable texture and returns RGBA32F or RGBX32F, but
when one requests GL_RGB32I or GL_RGB32UI the according 3-component
texture will be returned. This leads to problems later, when one wants
to use glCopyImageSubData to copy data between these textures that should
be compatible, but given the way virgl and Gallium handle this the latter
fails with an assertion, because the per-texel bit size is different.
By allowing the GL_RGB32* only for texture buffers these problems are avoided
without losing the ARB_tbo_rgb32 extension (thanks Ilia Mirkin).
v2: Correct spelling (Gurchetan Singh)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
When running gdb, make sure to pass the LD_PRELOAD variable only to
the executed program, not the debugger. Otherwise the debugger will
run the preloaded constructor/destructor too and bad things will
happen.
Suggested-by: Rafael Antognolli <rafael.antognolli@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
The problem with passing the configuration of the dump lib through a
file descriptor is that it can be read only once. But under gdb you
might want to rerun your program multiple times.
This change hands the configuration through a temporary file that is
deleted once the command line passes to intel_dump_gpu has exited.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
The array index needs to be corrected and it must be insured that it is
rounded and its value is non-negative before it is combined with the
face id.
v5: Use RNDNE instead of ADD 0.5 and FLOOR (Ilia Mirkin)
v6: Fix type (Roland Scheidegger)
Fixes 182 from android/cts/master/gles31-master.txt:
dEQP-GLES31.functional.texture.filtering.cube_array.formats.*
dEQP-GLES31.functional.texture.filtering.cube_array.sizes.*
dEQP-GLES31.functional.texture.filtering.cube_array.combinations.nearest_mipmap_*
dEQP-GLES31.functional.texture.filtering.cube_array.combinations.linear_mipmap_*
dEQP-GLES31.functional.texture.filtering.cube_array.no_edges_visible.*
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Correct the array index for TEXTURE_*1D_ARRAY, and TEXTURE_*2D_ARRAY
The standard says the array index is evaluated according to
floor(z + 0.5)
but RNDNE is sufficient also for the test cases were z is close to 1.5
and it is likely to hit 1.5, the corner case were RNDNE gives a result
different from above formula.
v5: - Use RNDNE instead of ADD 0.5 and FLOOR (Ilia Mirkin)
- update commit message
Fixes 325 tests from android/cts/master/gles3-master.txt:
dEQP-GLES3.functional.shaders.texture_functions.texture.*sampler2darray*
dEQP-GLES3.functional.shaders.texture_functions.textureoffset.*sampler2darray*
dEQP-GLES3.functional.shaders.texture_functions.texturelod.sampler2darray*
dEQP-GLES3.functional.shaders.texture_functions.texturelodoffset.*sampler2darray*
dEQP-GLES3.functional.shaders.texture_functions.texturegrad.*sampler2darray*
dEQP-GLES3.functional.shaders.texture_functions.texturegradoffset.*sampler2darray*
dEQP-GLES3.functional.texture.filtering.2d_array.formats.*
dEQP-GLES3.functional.texture.filtering.2d_array.sizes.*
dEQP-GLES3.functional.texture.filtering.2d_array.combinations.*
dEQP-GLES3.functional.texture.shadow.2d_array.*
dEQP-GLES3.functional.texture.vertex.2d_array.*
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Gradients used in texture lookups and the offsets must reside in the
same fetch clause (the first is imposed by the hardware and the second
is expected by sb). In order to ensure that no ALU clause is inserted
between emission and use of these, delay the emission of these
instructions until the texture instruction using them is also emitted.
This is needed in preparation for the correction of the texture array
indices.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
radv always needs it, so just check the header instead. Also
do not declare the function if the variable is not set, so we
get a nice compile error instead of failing to open a device
at runtime.
Fixes: b87ef9e606 "util: fix MSVC build issue in disk_cache.h"
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reinserting code directly before a jump means the block gets split
and merged, removing the original block and replacing it in the
process.
Hence keeping a pointer to the continue block over a reinsert
causes issues.
This code changes nir_opt_if to simply look for the new continue
block.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107275
CC: 18.1 <mesa-stable@lists.freedesktop.org>
The goal is to use radv_barrier()/radv_subpass_barrier() as
much as possible for further optimizations.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
total instructions in shared programs : 5480808 -> 5472107 (-0.16%)
total gprs used in shared programs : 647530 -> 647532 (0.00%)
total shared used in shared programs : 389120 -> 389120 (0.00%)
total local used in shared programs : 21064 -> 21064 (0.00%)
total bytes used in shared programs : 58551648 -> 58459352 (-0.16%)
local shared gpr inst bytes
helped 0 0 73 2609 2609
hurt 0 0 71 34 34
An alternative solution to the problem fixed in
0bd83d0 ("nv50/ir: move LateAlgebraicOpt to the very end").
total instructions in shared programs : 5481195 -> 5480808 (-0.01%)
total gprs used in shared programs : 647535 -> 647530 (-0.00%)
total shared used in shared programs : 389120 -> 389120 (0.00%)
total local used in shared programs : 21064 -> 21064 (0.00%)
total bytes used in shared programs : 58555784 -> 58551648 (-0.01%)
local shared gpr inst bytes
helped 0 0 2 34 34
hurt 0 0 0 0 0
This instruction seems to be faster than S2R and requires no barrier,
though the range of special registers it can read from is limited.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
LLVM 7 returns incorrect results when count is 0, something
has been broken since LLVM 6. Of course, the best solution is
to fix LLVM but this workaround works as expected for now.
Original workaround by Philippe Rebohle.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107276
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
When handling 'if' in copy propagation elements, if a certain variable
was killed when processing the first branch of the 'if', then the
second would get any propagation from previous nodes.
x = y;
if (...) {
z = x; // This would turn into z = y.
x = 22; // x gets killed.
} else {
w = x; // This would NOT turn into w = y.
}
With the change, we let copy propagation happen independently in the
two branches and only then apply the killed values for the subsequent
code.
One example in shader-db part of shaders/unity/8.shader_test:
(assign (xyz) (var_ref col_1) (var_ref tmpvar_8) )
(if (expression bool < (swiz y (var_ref xlv_TEXCOORD0) )(constant float (0.000000)) ) (
(assign (xyz) (var_ref col_1) (expression vec3 + (var_ref tmpvar_8) ... ) ... )
)
(
(assign (xyz) (var_ref col_1) (expression vec3 lrp (var_ref col_1) ... ) ... )
))
The variable col_1 was replaced by tmpvar_8 in the then-part but not
in the else-part.
NIR deals well with copy propagation, so it already covered for the
missing ones that this patch fixes.
Reviewed-by: Eric Anholt <eric@anholt.net>
Instead of keeping multiple acp_entries in lists, have a single
acp_entry per variable. With this, the implementation of clone is more
convenient and now fully implemented. In the previous code, clone was
only partial.
Before this patch, each acp_entry struct represented a write to a
variable including LHS, RHS and a mask of what channels were written
to. There were two main hash tables, the first (lhs_ht) stored a list
of acp_entries per LHS variable, with the values available to copy for
that variable; the second (rhs_ht) was a "reverse index" for the first
hash table, so stored acp_entries per RHS variable.
After the patch, there's a single acp_entry struct per LHS variable,
it contains an array with references to the RHS variables per
channel. There now is a single hash table, from LHS variable to the
corresponding entry. The "reverse index" is stored in the ACP entry,
in the form of a set of variables that copy from the LHS. To make the
clone operation cheaper, the ACP entries are created on demand.
This should not change the result of copy propagation, a later patch
will take advantage of the clone operation.
v2: Add note clarifying how the hashtable is destroyed.
v3: (all from Eric Anholt)
Add remove_unused_var_from_dsts() function for reuse.
Remove from dsts as we go instead of clearing at the end.
Add clarifying comment to erase().
Reviewed-by: Eric Anholt <eric@anholt.net>
Separate higher level logic of visiting instructions and chosing when
to store and use new copy data from the datastructure holding the copy
propagation information. This will also make easier later patches that
change the structure.
v2: Remove empty destructor and clarify how hash tables are destroyed.
Reviewed-by: Eric Anholt <eric@anholt.net>
In commit 86cb05a6d3 ("intel: aubinator: remove standard input
processing option") we removed the ability to process aub as an input
stream because we're now rely on mmapping the aub file to back the
buffers aubinator is parsing.
intel_aubdump was the provider of the standard input data and since
we've copied/reworked intel_aubdump into intel_dump_gpu within Mesa,
we don't need that code anymore.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
r600_gpu_load.c: In function ‘r600_gpu_load_thread’:
../../../../src/util/os_time.h:82:7: warning: assuming signed overflow does not occur when assuming that (X + c) >= X is always true [-Wstrict-overflow]
if (start <= end)
Assignment and usage of this variable both happen inside an
if(rad_image_has_dcc()) {} blocks. It seems gcc plays it safe and
assumes that both function calls could have different return values.
But in this case we should be safe.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
We should only use a #define locally once it's been upstreamed, and at
that point you should just update our drm_fourcc.h.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
color_interp_vgpr_index was declared as a generic char value.
Because signed values are used in this variable, the result
was not safe across architectures and crashed on ppc64[el]
and arm.
Declare color_interp_vgpr_index as a signed type.
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
This lets us move the glBlitFramebuffer nonsense into the GL driver and
make the usage of BLORP mutch more explicit and obvious as to what it's
doing.
Reviewed-by: Chad Versace <chadversary@chromium.org>
At the moment, this is entirely internal but we'll expose it to clients
of the BLORP API in the next commit.
Reviewed-by: Chad Versace <chadversary@chromium.org>
After optimization passes and many trasfromations most of memory
NIR holds is a garbage which was being freed only after shader deletion.
Freeing it at the end of linking will save memory which would be useful
in case there are a lot of complex shaders being compiled.
The common case for this issue is 32bit game running under Wine.
The cost of the optimization is around ~3-5% of compilation speed
with complex shaders.
V2: by Jason Ekstrand
- Move nir_sweep up, right after the last change of NIR
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103274
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: mesa-stable@lists.freedesktop.org
Dependencies between rings are inserted correctly if a buffer is
represented by only one unique amdgpu_winsys_bo instance.
Use a hash table keyed by amdgpu_bo_handle to have exactly one
amdgpu_winsys_bo per amdgpu_bo_handle.
v2: return offset and stride properly
Tested-by: Leo Liu <leo.liu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Instead of having quite so many singletons, we use a struct aub_file to
organize the bits we need for writing an aub file.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
For large buffers which span an entire l1 page table, we got the range
calculations wrong. In this case, we end up with an l1_start which is
the first byte represented by the given l1 table and an l1_end which is
the first byte after the range represented by the l1 table. Then
l2_start_index == L2_index(l2_end) due to roll-over. Instead, compute
lN_end using (1Ull << shift) - 1 so that lN_end is the last byte in the
range represented by the Nth level page table. When we do this, we
don't need the conditional expression anymore.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Compiler doesn't pick up that level and start_layer will be defined,
so do as was done for num_layers in 4d8b476fa9 "intel/blorp: Fix
compiler warning about num_layers." and always set it.
Fixes warning
../../src/mesa/drivers/dri/i965/brw_blorp.c: In function ‘brw_blorp_clear_depth_stencil’:
../../src/mesa/drivers/dri/i965/brw_blorp.c:1439:4: warning: ‘start_layer’ may be used uninitialized in this function [-Wmaybe-uninitialized]
blorp_clear_depth_stencil(&batch, &depth_surf, &stencil_surf,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
level, start_layer, num_layers,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
x0, y0, x1, y1,
~~~~~~~~~~~~~~~
(mask & BUFFER_BIT_DEPTH), ctx->Depth.Clear,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
stencil_mask, ctx->Stencil.Clear);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../src/mesa/drivers/dri/i965/brw_blorp.c:1439:4: warning: ‘level’ may be used uninitialized in this function [-Wmaybe-uninitialized]
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
And also specify the maximum size when writing to static buffers. The
warning below refers to the case where "str5" could be larger than
"str5 - str4", then the strcat would have overlapping dst and src.
Compiler doesn't pick up the bound from the snprintf above, so we make
clear the bounds of str5 by using strncat() instead of strcat().
../../src/util/tests/string_buffer/string_buffer_test.cpp: In member function ‘virtual void string_buffer_string_buffer_tests_Test::TestBody()’:
../../src/util/tests/string_buffer/string_buffer_test.cpp:106:10: warning: ‘char* strcat(char*, const char*)’ accessing 81 or more bytes at offsets 48 and 128 may overlap 1 byte at offset 128 [-Wrestrict]
strcat(str4, str5);
~~~~~~^~~~~~~~~~~~
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Thomas Helland <thomashelland90@gmail.com>
GCC 8.1.1 is having a hard time identifying that the values are
properly initialized when used. In the 'memset_value' case, we pass
the uninitialized value to another function (that will use only if the
conditions match the initialization).
Just give enough hint to the compiler to figure things out. Fixes the
warnings
../../src/mesa/drivers/dri/i965/intel_mipmap_tree.c: In function ‘intel_miptree_alloc_aux’:
../../src/mesa/drivers/dri/i965/intel_mipmap_tree.c:1839:18: warning: ‘memset_value’ may be used uninitialized in this function [-Wmaybe-uninitialized]
mt->aux_buf = intel_alloc_aux_buffer(brw, &aux_surf, needs_memset,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
memset_value);
~~~~~~~~~~~~~
../../src/mesa/drivers/dri/i965/intel_mipmap_tree.c:1698:10: warning: ‘initial_state’ may be used uninitialized in this function [-Wmaybe-uninitialized]
if (wants_memset)
^
../../src/mesa/drivers/dri/i965/intel_mipmap_tree.c:1772:23: note: ‘initial_state’ was declared here
enum isl_aux_state initial_state;
^~~~~~~~~~~~~
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Code assumes that all the necessary fields will exist, but compiler
doesn't know about this. Provide zero as default values, like in other
decoding functions.
Fixes warnings
../../src/intel/common/gen_batch_decoder.c: In function ‘handle_media_interface_descriptor_load’:
../../src/intel/common/gen_batch_decoder.c:347:7: warning: ‘binding_entry_count’ may be used uninitialized in this function [-Wmaybe-uninitialized]
dump_binding_table(ctx, binding_table_offset, binding_entry_count);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../src/intel/common/gen_batch_decoder.c:347:7: warning: ‘binding_table_offset’ may be used uninitialized in this function [-Wmaybe-uninitialized]
../../src/intel/common/gen_batch_decoder.c:346:7: warning: ‘sampler_count’ may be used uninitialized in this function [-Wmaybe-uninitialized]
dump_samplers(ctx, sampler_offset, sampler_count);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../src/intel/common/gen_batch_decoder.c:346:7: warning: ‘sampler_offset’ may be used uninitialized in this function [-Wmaybe-uninitialized]
../../src/intel/common/gen_batch_decoder.c:343:7: warning: ‘ksp’ may be used uninitialized in this function [-Wmaybe-uninitialized]
ctx_disassemble_program(ctx, ksp, "compute shader");
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../src/intel/common/gen_batch_decoder.c: In function ‘decode_dynamic_state_pointers’:
../../src/intel/common/gen_batch_decoder.c:663:54: warning: ‘state_offset’ may be used uninitialized in this function [-Wmaybe-uninitialized]
const uint32_t *state_map = ctx->dynamic_base.map + state_offset;
~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~
../../src/intel/common/gen_batch_decoder.c: In function ‘gen_print_batch’:
../../src/intel/common/gen_batch_decoder.c:856:13: warning: ‘next_batch.map’ may be used uninitialized in this function [-Wmaybe-uninitialized]
if (next_batch.map == NULL) {
^
../../src/intel/common/gen_batch_decoder.c:860:13: warning: ‘next_batch.addr’ may be used uninitialized in this function [-Wmaybe-uninitialized]
gen_print_batch(ctx, next_batch.map, next_batch.size,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
next_batch.addr);
~~~~~~~~~~~~~~~~
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
strncpy() doesn't guarantee the terminator NUL, so we would need to
set ourselves. Just use snprintf() instead.
Fixes the warnings
../../src/intel/common/gen_decoder.c: In function ‘iter_decode_field’:
../../src/intel/common/gen_decoder.c:897:7: warning: ‘strncpy’ specified bound 128 equals destination size [-Wstringop-truncation]
strncpy(iter->name, iter->field->name, sizeof(iter->name));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘iter_advance_field’,
inlined from ‘gen_field_iterator_next’ at ../../src/intel/common/gen_decoder.c:1015:9:
../../src/intel/common/gen_decoder.c:844:7: warning: ‘strncpy’ specified bound 128 equals destination size [-Wstringop-truncation]
strncpy(iter->name, iter->field->name, sizeof(iter->name));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
The error buffer is limited to 256, but the report contains the
filename and possibly other data. So give it more space.
Avoids the warnings
../../src/intel/vulkan/anv_util.c: In function ‘__anv_perf_warn’:
../../src/intel/vulkan/anv_util.c:66:42: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size 254 [-Wformat-truncation=]
snprintf(report, sizeof(report), "%s: %s", file, buffer);
^~ ~~~~~~
../../src/intel/vulkan/anv_util.c:66:4: note: ‘snprintf’ output 3 or more bytes (assuming 258) into a destination of size 256
snprintf(report, sizeof(report), "%s: %s", file, buffer);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../src/intel/vulkan/anv_util.c: In function ‘__vk_errorf’:
../../src/intel/vulkan/anv_util.c:96:48: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size 252 [-Wformat-truncation=]
snprintf(report, sizeof(report), "%s:%d: %s (%s)", file, line, buffer,
^~ ~~~~~~
../../src/intel/vulkan/anv_util.c:96:7: note: ‘snprintf’ output 8 or more bytes (assuming 263) into a destination of size 256
snprintf(report, sizeof(report), "%s:%d: %s (%s)", file, line, buffer,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
error_str);
~~~~~~~~~~
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
When one of the cases is not part of the enum, the compilar complains:
../../src/intel/vulkan/anv_formats.c: In function ‘anv_GetPhysicalDeviceFormatProperties2’:
../../src/intel/vulkan/anv_formats.c:728:7: warning: case value ‘1000001004’ not in enumerated type ‘VkStructureType’ {aka ‘enum VkStructureType’} [-Wswitch]
case VK_STRUCTURE_TYPE_WSI_FORMAT_MODIFIER_PROPERTIES_LIST_MESA:
^~~~
Given the switch has an "default:" case, we don't lose anything by
switching on the unsigned value to avoid the warning.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
The "__inst" will contain the name used for the variable of type
"__type *". Parenthesis is not necessary as the name itself shouldn't
be an expression.
Fixes warning:
In file included from ../../src/mesa/main/mtypes.h:49,
from ../../src/intel/compiler/brw_compiler.h:30,
from ../../src/intel/compiler/brw_shader.h:29,
from ../../src/intel/compiler/brw_fs.h:31,
from ../../src/intel/compiler/brw_fs_cse.cpp:24:
../../src/intel/compiler/brw_fs_cse.cpp: In member function ‘bool fs_visitor::opt_cse_local(bblock_t*)’:
../../src/compiler/glsl/list.h:675:12: warning: unnecessary parentheses in declaration of ‘entry’ [-Wparentheses]
__type *(__inst); \
^
../../src/intel/compiler/brw_fs_cse.cpp:257:10: note: in expansion of macro ‘foreach_in_list_use_after’
foreach_in_list_use_after(aeb_entry, entry, &aeb) {
^~~~~~~~~~~~~~~~~~~~~~~~~
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Explicitly convert to signed integer. Conversion is valid since is the
same (implicitly) used to initialize the loop. Avoids the warning:
../../src/intel/compiler/brw_fs.cpp: In member function ‘bool fs_visitor::lower_simd_width()’:
../../src/intel/compiler/brw_fs.cpp:5761:45: warning: comparison of integer expressions of different signedness: ‘int’ and ‘unsigned int’ [-Wsign-compare]
split_inst.eot = inst->eot && i == n - 1;
~~^~~~~~~~
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Fixes warning:
../../src/compiler/spirv/vtn_variables.c: In function ‘var_decoration_cb’:
../../src/compiler/spirv/vtn_variables.c:1400:12: warning: ‘is_vertex_input’ may be used uninitialized in this function [-Wmaybe-uninitialized]
bool is_vertex_input;
^~~~~~~~~~~~~~~
The code used to set is_vertex_input in all possible codepaths, but
after 23edc5b1ef "spirv: translate default-block uniforms" the
compiler isn't sure all codepaths will initialize the variable.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Core infrastructure for performance counters, using gallium's batch
query interface (to support AMD_performance_monitor).
Signed-off-by: Rob Clark <robdclark@gmail.com>
For batch queries we have N different query_type's for one query, so
mapping a single query_type to a sample_provider doesn't really work
out. Instead add a new constructor to construct a query directly
from a sample_provider.
Also, the sample buffer size needs to be determined at runtime, as
it depends on the number of query_types.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Take the query object, rather than the ctx. The ctx ptr isn't hugely
useful but for back queries we will need the query object to properly
get the results.
Signed-off-by: Rob Clark <robdclark@gmail.com>
For now it still goes to stdout, this will make it easier to support
output on stderr like what frameretrace expects.
(If we eventually have a proper GL extension for this, implementation
probably looks like dumping shader disasm to a tmp file and then dumping
that out over whatever mechanism is used.)
Signed-off-by: Rob Clark <robdclark@gmail.com>
v2: reword comment about lower_helper_invocations to be more clear
that it might not work on all hardware
v3: add special variant of load_sample_id which does not imply per-
sample shading
Signed-off-by: Rob Clark <robdclark@gmail.com>
Frameretrace ends up w/ excess calls to SelectPerfMonitorCountersAMD()
which ends up re-enabling already enabled counters. Which causes
ActiveCounters[group] to be double incremented for the same counter.
This causes BeginPerfMonitorAMD() to fail.
The AMD_performance_monitor spec doesn't say that an error should be
generated in this case. So I think the safe thing to do is just safe-
guard against excess increments/decrements.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Virgl could save a lot of work converting buffers in the host side
between formats if Mesa supported a bunch of other formats when reading
pixels.
This commit adds cases to handle specific formats so that the values
reported by the two calls match more closely the underlying native
formats.
In GLES is important that IMPLEMENTATION_COLOR_READ_* return the native
format and data type because the spec only allows reading with those,
besides GL_RGBA or GL_RGBA_INTEGER.
Additionally, because virgl currently doesn't implement such
conversions, this commit fixes several tests in
dEQP-GLES3.functional.fbo.color.clear.*, when using virgl in the guest
side.
The logic is based on knowledge that is shared with
_mesa_format_matches_format_and_type() but we cannot assert that the
results match as we don't have all the starting information at both
points. So leave the assert out and hope CI comes soon to save us all.
v2: * Let R10G10B10A2_UINT fall back to GL_RGBA_INTEGER (Eric Anholt)
* Assert with _mesa_format_matches_format_and_type (Eric Anholt)
v3: * Remove the assert, as it won't be reliable (Eric Anholt)
v4: * Use _mesa_is_format_integer in the fallback (Eric Anholt)
v5: * Remove superfluous call to
_mesa_uncompressed_format_to_type_and_comps (Eric Anholt)
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Jakob Bornecrantz <jakob@collabora.com>
By default, our internal rendering commands are discarded
only if the predicate is non-zero (ie. DRAW_VISIBLE). But
VK_EXT_conditional_rendering also allows to discard commands
when the predicate is zero, which means we have to use a
different flag.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
VK_EXT_conditional_rendering allows to discard draw commands
(not only normal draws).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Addresses in the command streams should be in canonical form (i.e
bit[63:48] == bit[47]). If the [bo->gtt_offset, bo->gtt_offset +
target_offset] range contains the address 0x800000000000, the current
code will fail that criteria.
v2: Fix missing include (Lionel)
Fixes: 1c9053d076 ("i965: Prepare batchbuffer module for softpin support.")
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We don't need to emit PS_PARTIAL_FLUSH for the pre fragment shader
stages (ie. geometry/tessellation). Emitting VS_PARTIAL_FLUSH
is enough for these stages. Note that PS_PARTIAL_FLUSH also
synchronizes all vertex stages.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The assert is checking that we are not binding more descriptor sets
than the supported by the driver. When binding the descriptor set
number MAX_SETS-1, it was breaking the assert because
descriptorSetCount = 1.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Just a nice hint for both peoples and compilers.
Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Just a nice hint for both peoples and compilers.
Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Just a nice hint for both peoples and compilers.
Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Ported from radeonsi. Improves windowed glxgears ran as
vblank_mode=0 glxgears -info -geometry 0+0+512+512
from ≈2270 FPS to ≈2360 FPS. Tested with AMD TURKS.
v2: turned out glxgears ignores the option above, the correct way would
be "512x512+0+0". Now it can be seen 512x512 actually loses 30 FPS.
300×300 however wins around a hundred FPS, and to leave some room in
case results may differ for other cards I want not to nitpick in search
of an optimum but to simply leave 300×300 in the code.
v3: remove redundant braces, and try harder for the mail to stick to
the rest of the series.
Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Reviewed-by: Gert Wollny <gw.fossdev@gmail.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Annoyingly we still have to briefly drop the lock to unref resources..
but push the lock down into __fd_batch_destroy() so we can invalidate
the batch and reset resources before dropping the lock.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Re-allocate rather than re-use. Originally we had an unnecessarily
complex design to avoid re-allocating cmdstream buffers. But now that
support for "growable" cmdstream buffers has been in place for a couple
years, I guess we can care a bit less about the extra overhead on older
kernels.
But making the batches one-shot removes a class of potential race
conditions vs the flush_queue.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Instead of the reading batch setting a dependency on the writing batch,
simply flush the writing batch immediately. This avoids situations
where we have to flush the context's current batch later.
Signed-off-by: Rob Clark <robdclark@gmail.com>
This was basically to avoid a zero-dword IB (indirect-branch), but
instead just don't emit the IB packet in that case.
Signed-off-by: Rob Clark <robdclark@gmail.com>
pipe_framebuffer_state can have samples=0 in various cases, which is
actually the same thing as samples=1. So use the _get_num_samples()
helper to populate the key, to avoid this looking like two distinct
fb states to the cache.
Signed-off-by: Rob Clark <robdclark@gmail.com>
It is possible for a batch to be freed under our feet when flushing, so
it is best to hold a reference to all of them up-front.
Signed-off-by: Rob Clark <robdclark@gmail.com>
OpenCL knows vector of size 8 and 16.
v2: rebased on master (nir_swizzle rework)
rework more declarations with nir_component_mask_t
adjust print_var_decl
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
If we know that the given image doesn't have any metadata,
we don't need to flush.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
The Vulkan 1.1.80 spec says:
"viewMask has the same effect for the described subpass as
VkRenderPassMultiviewCreateInfo::pViewMasks has on each
corresponding subpass."
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The current code is buggy: if there are only 12 dwords left in cbuf,
we emit a zero data length command which will be rejected by virglrenderer.
Fix it by calling flush in this case.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Dave Airlie <airlied@redhat.com>
This allows us to implement glMinSampleShading correctly, which up
until now just got ignored.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
When handling loops in constant propagation, implement the "FINISHME"
comment like copy propagation: perform a first pass to find values
that can't be propagated, then perform a second pass with the ACP
containing still valid values.
Certain values are killed because the loop may run more than one
iteration, so we can't copy propagate them as they would be invalid in
the later iterations.
Reviewed-by: Eric Anholt <eric@anholt.net>
When handling 'if' in constant propagation, if a certain variable was
killed when processing the first branch of the 'if', then the second
would get any propagation from previous nodes. This is similar to the
change done for copy propagation code.
x = 1;
if (...) {
z = x; // This would turn into z = 1.
x = 22; // x gets killed.
} else {
w = x; // This would NOT turn into w = 1.
}
With the change, we let constant propagation happen independently in
the two branches and only then apply the killed values for the
subsequent code.
The new code use a single hash table for keeping the kills of both
branches (the branches only write to it), and it gets deleted after we
use -- instead of waiting for mem_ctx to collect it.
NIR deals well with constant propagation, so it already covered for
the missing ones that this patch fixes.
Reviewed-by: Eric Anholt <eric@anholt.net>
total instructions in shared programs: 98578 -> 98119 (-0.47%)
instructions in affected programs: 27571 -> 27112 (-1.66%)
and it also eliminates most spills/fills on the CTS's randomized uniform
usage testcases.
SNB doesn't have a definition of 3DSTATE_CONSTANT_BODY, thats
why we got segmentation fault when used INTEL_DEBUG=bat.
Fixed by adding of 3DSTATE_CONSTANT_BODY into 3DSTATE_CONSTANT
of VS, GS and PS structures.
v2: added definition of 3DSTATE_CONSTANT_BODY to the gen6.xml
Fixes: 169d8e011a (intel: Fix 3DSTATE_CONSTANT buffer decoding.)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107190
Signed-off-by: Sergii Romantsov <sergii.romantsov@globallogic.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This makes the arguments match the (thing, container) pattern used in
other nir_foreach macros and also renames it to make that a bit more
clear.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
For one thing, the NIR opcodes for image load/store always take and
return a vec4 value regardless of the image type. We need to fix up
both the source and destination to handle it. For another thing, we
weren't actually setting up a destination in the OpAtomicLoad case.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: mesa-stable@lists.freedesktop.org
Converting from a switch statement that would not allow intermediate sample counts
to use an if-else chain went a bit wrong, so that in some cases the range that
should be inclusive was exclusive and the line for 16 samples was copies wrongly.
v2: elaborate commit message.
Fixes: 91f48cdfe5
virgl: Add support for glGetMultisample
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com> (v1)
fixes a couple of packed_pixel CTS tests. No regressions inside a CTS run.
v2: simplify the changes a bit
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
This fixes a nasty hang in Batman: Arkham City which apparently calls
vkCmdClearColorImage on a linear RGB image.
cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
In this case, the surface faking will give us a R8_UNORM surface and we
need to do an sRGB conversion in the shader. Found by inspection.
cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
A while ago, we added a bunch of format conversion helpers; we should
use them instead of hand-rolling sRGB conversions.
Reviewed-by: Eric Anholt <eric@anholt.net>
If you load S and clear Z or vice versa, the clear may get lost. Just
fall back to drawing a quad.
Fixes KHR-GLES3.packed_depth_stencil.verify_read_pixels.depth24_stencil8
These are not unit tests, as they rely on the host's XVMC and some user
configuration. Switch them over to being general installed tools, to fix
unit testing.
Fixes: 22a817af8a ("meson: build gallium xvmc state tracker")
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
The current spill code checks in each instruction of an instruction group whether
spilling is needed and if so, it adds spilling for each component as a seperate
instruction and it allocates a new temporary for each component and since it takes
the write mask from the TGSI representation, all components might be written
each time and as a result already written components might be overwritten with
garbage like:
...
y: MOV R9.y, [0x42140000 37].x
t: MOV R8.x, [0x42040000 33].y
...
MEM_SCRATCH WRITE_IND_ACK 0 R9.xy__, @R4.x ES:3
MEM_SCRATCH WRITE_IND_ACK 0 R8.xy__, @R4.x ES:3
...
To resolve this isse accumulate spills to the same memory location so that only one
memory write instruction is emitted for an instruction group that writes up to all
four components.
This fixes updated piglits (see https://patchwork.freedesktop.org/series/46064/):
spec/glsl-1.30/execution
fs-large-local-array-vec2.shader_test
fs-large-local-array-vec3.shader_test
fs-large-local-array-vec4.shader_test
v2: fix some typos and add comment about piglits (Roland Scheidegger)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com> (v1)
Note that the separate stencil miptree now has the same alloc_flag as
the depth component. Only stencil renderbuffers (as opposed to textures)
have BO_ALLOC_BUSY.
v2: Add note about BO_ALLOC_BUSY in message (Topi).
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
The current behavior masked two bugs where the flag was not set to true
after modifying the stencil texture. One case was a regression
introduced with commit bdbb527a65 and
another was a bug in the depthstencil mapping code. These have since
been fixed.
To prevent such bugs from being masked in the future, initialize
r8stencil_needs_update to false.
v2: Keep the delayed allocation.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Enable a future patch to create the r8stencil_mt in this function.
v2: Explicitly set etc_format to MESA_FORMAT_NONE (Topi).
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Note that this maintains BO_ALLOC_BUSY for depth renderbuffers, but not
depth textures.
v2: Add note about BO_ALLOC_BUSY in message (Topi).
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
This enum constant was introduced to enable blit maps with
intel_miptree_create da2880bea0. Now that
such maps use the more direct make_surface function which allows you to
specify the tiling directly, the constant is no longer being used.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Do this so that we don't have to special case linearly-tiled depth
buffers in miptree_create.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Fix the case where stencil writes are enabled on a depth stencil
texture. Found by inspection.
v2: Fix message to allow for depth stencil writes (Topi).
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Fixes the regresion introduced with commit
bdbb527a65
"i965: Use ISL for emitting depth/stencil/hiz state on gen6+"
Found by inspection.
Prevents regressing the piglit test, fbo-depth-array stencil-draw, later
on in this series.
Cc: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Found by initializing the r8stencil_needs_update to false in
make_separate_stencil_surface.
Prevents regressing the piglit test arb_stencil_texturing-draw, later on
in the series.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
There are no fixed sized array arguments in C, those are simply pointers
to unsized arrays and as the size is passed in anyway, just rely on that.
where possible calls are replaced by nir_channel and nir_channels.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Drop an if statement whose predicate never evaluates to true. row_pitch
belongs to a surface with non-linear tiling. According to
isl_calc_tiled_min_row_pitch, the pitch is a multiple of the tile width.
By looking at isl_tiling_get_info, we see that non-linear tilings have
widths greater than or equal to 128B.
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
It wasn't causing problems since there's nothing to delete, but better
be consistent with the rest of existing codebase.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The only value in kill_entry is the writemask, which can be stored in
the data pointer of the hash table entry.
Suggested by Eric Anholt.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Thomas Helland <thomashelland90@gmail.com>
Since 4654439fdd "glsl: Use hash tables for
opt_constant_propagation() kill sets." uses a hash_table for storing
kill_entries, so the structs can be simplified.
Remove the exec_node from kill_entry since it is not used in an
exec_list anymore.
Remove the 'var' from kill_entry since it is now redundant with the
key of the hash table.
Suggested by Eric Anholt.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Thomas Helland <thomashelland90@gmail.com>
For V3D, the HW will interpolate slightly differently along the shared
edge of the trifan. The conformance tests manage to catch this in the
nearest_consistency_* group. To get interpolation to match, we need the
last vertex of the triangle to be shared.
I first tried implementing draw_rectangle to do triangles instead, but
that was quite a bit (147 lines) of code duplication from u_blitter, and
this seems much simpler and less likely to break as u_blitter changes.
Fixes dEQP-GLES3.functional.fbo.blit.rect.nearest_consistency_* on V3D.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
These helpers have been unused, and were definitely not useful since
330d0607ed ("gallium: remove pipe_index_buffer and set_index_buffer")
made it so that they never had an index buffer passed in.
For an upcoming u_blitter change to use these helpers, I have just 6 bytes
of index data, so pass it as user data until a more interesting caller
comes along.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
I had mistakenly used the COHERENT flag, which can only be set when
PERSISTENT is mapped, but isn't always.
Fixes: a2014c2eb9 ("vc4: Simplify the DISCARD_RANGE handling")
All of our other texture arrays will be tiled, but 1D is an array of
raster mappings and we had the wrong value plugged in here. Fixes piglit
getteximage-targets 1D_ARRAY
We were only emitting the RT blend state for RT 0 and only enabling it for
RT 0, when the gallium API for !independent_blend is for rt0's state to
apply to all of them.
Fixes piglit fbo-drawbuffers-blend-add.
We just never set the value that was returned for MSAA mappings (directly
reading back an MSAA framebuffer). Since we're handing back ss_map, it
should be ss_map's stride from our nested transfer.
Fixes piglit /home/anholt/src/piglit/bin/fbo-depthstencil -samples=4
cases.
Reviewed-by: Rob Clark <robdclark@gmail.com>
We created a temporary with box->{width,height} and then tried to map
width,height from a nonzero offset when we meant to just map the whole
temporary.
Fixes segfaults in V3D in dEQP-GLES3.functional.prerequisite.read_pixels
with --deqp-egl-config-name=rgba8888d24s8ms4 and also piglit's read-front
clear-front-first -samples=4
Reviewed-by: Rob Clark <robdclark@gmail.com>
At 232ed89802 "i965/fs: Register allocator
shoudn't use grf127 for sends dest" we didn't take into account the case
of SEND instructions that are not send_from_grf. But since Gen7+ although
the backend still uses MRFs internally for sends they are finally
assigned to a GRFs.
In the case of unspills the backend assigns directly as source its
destination because it is suppose to be available. So we always have a
source-destination overlap. If the reg_allocator assigns registers that
include the grf127 we fail the validation rule that affects Gen8+
"r127 must not be used for return address when there is a src and dest
overlap in send instruction."
So this patch activates the grf127_send_hack_node for Gen8+ and if we
have any register spilled we add interferences to the destination of
the unspill operations.
We also need to avoid that opt_bank_conflicts() optimization, that runs
after the register allocation, doesn't move things around, causing the
grf127 to be used in the condition we were avoiding.
Fixes piglit test tests/spec/arb_compute_shader/linker/bug-93840.shader_test
and some shader-db crashed because of the grf127 validation rule..
v2: make sure that opt_bank_conflicts() optimization doesn't change
the use of grf127. (Caio)
Found by Caio Marcelo de Oliveira Filho
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107193
Fixes: 232ed89802 "i965/fs: Register allocator shoudn't use grf127 for sends dest"
Cc: 18.1 <mesa-stable@lists.freedesktop.org>
Cc: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
It's optional, only implemented by the etnaviv driver so far.
Fixes: 501d0edeca "st/mesa: call resource_changed when binding a
EGLImage to a texture"
Fixes: a37cf630b4 "gallium: add pipe_screen::resource_changed callback
wrappers"
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
While we're at it, add some extensions we missed along the way like the
VK_KHR_maintenanceN extensions.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
we already have this code duplicated and we will need it for the global
group size as well
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
also reorder to match the gl_system_value enum.
It is weird that the STATIC_ASSERT doesn't trigger though.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Now that 'set' can't be NULL because the meta operations no
longer bind a NULL descriptor, the logic can be simplified
a little bit.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
We mostly use the same priority for all buffer objects, so
I don't think that matter much. This should reduce CPU
overhead a little bit.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
When a EGLImage is newly bound to a texture, we need to make sure the
driver is informed that the resource might have changed. Fixes stale
texture content on Etnaviv when binding an existing EGLImage to an
existing texture object.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
VkCreateRenderPass2KHR() is quite similar to VkCreateRenderPass()
but refactoring the code is a bit painful.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
If the depth function is EQUAL, then we'll only write the depth value
when it already matches what's in the buffer, which is pointless.
Skipping these writes can save bandwidth.
The state tracker can easily take care of this, so all drivers benefit.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
In a single call to vk_errorf() in the Android code, the arguments were
swapped. The bug has existed since day one. Chrome OS used to forgive
the warning, but it is now a compilation error.
CC: <mesa-stable@lists.freedesktop.org>
Fixes: 053d4c32 "anv: Implement VK_ANDROID_native_buffer (v9)"
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Changes to vk.xml and anv_entrypoints_gen.py broke the Autotools build
on Android. The changes undef'd the VK_ANDROID_native_buffer entrypoints
in anv_entrypoints.h.
Fix it with CPPFLAGS += -DVK_USE_PLATFORM_ANDROID_KHR.
CC: <mesa-stable@lists.freedesktop.org>
See-Also: 63525ba7 "android: enable VK_ANDROID_native_buffer"
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
If the glsl is something like this:
in vec4 some_input;
interpolateAtCentroid(some_input[idx])
then it now gets generated as if it were:
interpolateAtCentroid(some_input)[idx]
This is necessary because the index will get generated as a series of
nir_bcsel instructions so it would no longer be an input variable. It
is similar to what is done for GLSL in ca63a5ed3e.
Although I can’t find anything explicit in the Vulkan specs to say
this should be allowed, the SPIR-V spec just says “the operand
interpolant must be a pointer to the Input Storage Class”, which I
guess doesn’t rule out any type of pointer to an input.
This was found using the spec/glsl-4.40/execution/fs-interpolateAt*
Piglit tests with the ARB_gl_spirv branch.
Signed-off-by: Neil Roberts <nroberts@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
v2: update after nir_deref_instr land on master. Implemented by
Alejandro Piñeiro. Special thanks to Jason Ekstrand for guidance
at the new nir_deref_instr world.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
There are a number of opcode_desc table entries for many of these
unused opcodes. A symbolic opcode enum will be required in a future
commit in order to keep them in the opcode description tables. The
alternative would be to remove the unused opcodes from the opcode
description tables.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This makes the message length available at the IR level, which should
save some guesswork in a future commit.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Constructing a descriptor in-place as part of the immediate of an ALU
instruction is no longer supported.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The return value is not used anymore. This allows simplifying the
code slightly, and in addition it should frustrate anybody's attempts
to continue using the obsolete piecemeal approach to construct a
message descriptor in combination with brw_send_indirect_message().
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
All users of brw_send_indirect_surface_message() should be providing a
full descriptor immediate up front by now, this isn't necessary
anymore.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The current approach of returning a setup instruction where additional
descriptor fields can be specified is still supported in order to keep
things working, but it will be removed later in this series.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This replaces brw_set_message_descriptor() with the composition of
brw_set_desc() and a new inline helper function that packs the common
message descriptor controls into an integer. The goal is to represent
all message descriptors as a 32-bit integer which is written at once
into the instruction, which is more flexible (SENDS anyone?), robust
(see d2eecf0b0b fixing an issue
ultimately caused by some bits of the extended message descriptor
being left undefined) and future-proof than the current approach of
specifying the individual descriptor fields directly into the
instruction.
This approach also seems more self-documenting, since it will allow
removing calls to functions with way too many arguments like
brw_set_*_message() and brw_send_indirect_message(), and instead
provide a single descriptor argument constructed from an appropriate
combination of brw_*_desc() helpers.
Note that because brw_set_message_descriptor() was (conditionally?)
overriding fields of the instruction which strictly speaking weren't
part of the message descriptor, this involves calling
brw_inst_set_sfid() and brw_inst_set_eot() in some cases in addition
to brw_set_desc().
v2: Use SET_BITS macro instead of left shift (Ken).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Allows to specify a bitfield based on its upper and lower bounds
instead of a symbolic field definition, kind of what the current
GET_BITS macro is to GET_FIELD.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This introduces helpers that can be used to specify or extract the
whole descriptor of a SEND message instruction at once. Because the
the instruction encoding of these is rather awkward on some
generations using the generic brw_inst.h macros doesn't seem like an
option.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This allows brw_search_cache to be used to find programs without
causing extra state to be emitted in the case where the program isn't
being made active. (For example, to find the program to save out with
the ARB_get_program_binary interface.)
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This might be required because some stages might generate different
programs depending on the other stages in the program. For example,
the i965 driver's tessellation control stage depends on the
tessellation evaluation shader.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
We will need to populate the default key for ARB_get_program_binary to
allow us to retrieve the default gen program to store in the program
binary.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Trying to make sure the setup of the default program key is not
dependent on the GL state.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
For saving programs (shader cache; get program binary) it is useful to
set the id to 0, with the stage being a parameter.
For restoring programs it is useful to set the id to the id allocated
to the program at creation time.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
We will want to use these for both the disk shader cache, and for the
ARB_get_program_binary.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
brw_program_deserialize_driver_blob will be a more generic form of
brw_program_deserialize_nir. In addition to nir, it will also be able
to extract gen binaries and upload them to the program cache.
In this commit, it continues to only support nir.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This will allow get_program_binary to add the gen program into its
serialization in addition to just the nir program.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
The driver may prefer to have a different blob for
ARB_get_program_binary compared to the version saved out for the disk
shader cache.
Since they both use the driver_cache_blob field, we need to always
give the driver the opportunity to fill in the driver_cache_blob when
saving the program binary.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This function is called just before the gl_program::driver_cache_blob
is saved out as part of the gl_program serialization.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Previously the mesa core code would not call to serialize the
driver_cache_blob if it existed. We will update it to always call to
serialize the driver_cache_blob meaning we should avoid re-serializing
it under mesa/state_tracker.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Until now we have assumed that we could skip emitting these barriers
in the general case based on empirical testing and a few assumptions
detailed in a comment in the driver code, however, recent CTS tests
have showed that we actually need them to produce correct behavior.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Looks like I broke intel CI compiles.
Fixes: 6f3aee40f9 (radv: using tls to store llvm related info and speed up compiles (v10))
Tested-by: Clayton Craft <clayton.a.craft@intel.com>
Error states coming from actual Vulkan applications tend to have fairly
long command buffers and lots of chained batches. 30 total BOs isn't
nearly enough. This commit bumps it to 256, makes some things use the
actual number of sections instead of the #define, and adds asserts if we
ever go over 256 sections.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Our attempt to restart the loop with the second level batch worked at
one point but got broken at some point. It was too fragile anyway and
we're not likely to have enough secondaries to actually overflow the
stack so we may as well recurse in both cases.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
The vtest protocol is pretty simple but also pretty dumb, and
the v1 caps query was fixed size, with no nice way to expand it,
however the server also ignores any command it doesn't understand.
So we can query v2 caps by sending a v2 followed by a v1, if the
v2 is ignored we know it's an old vtest server, and the we get
a v2 answer then we can just read the v1 answer and discard it.
Acked-by: Jakob Bornecrantz <jakob@collabora.com> (sounds good)
CACHE_MODE_SS is not listed in gfxspecs table for user mode
non-privileged registers. So, making any changes from Mesa
will do nothing. Kernel is already setting this bit in
CACHE_MODE_SS register which is saved/restored to/from
the HW context image.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
CACHE_MODE_SS is not listed in gfxspecs table for user mode
non-privileged registers. So, making any changes from Mesa
will do nothing. Kernel is already setting this bit in
CACHE_MODE_SS register which is saved/restored to/from
the HW context image.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Enables SPV_KHR_8bit_storage and VK_KHR_8bit_storage on gen 8+
using the VK_KHR_get_physical_device_properties2 functionality
to expose if the extension is supported or not.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
When the destination is a BYTE type allow raw movs
even if the stride is not exact multiple of destination
type and exec type, execution type is Word and its size is 2.
This restriction was only allowing stride==2 destinations
for 8-bit types.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Since Gen8+ Intel PRM states that "r127 must not be used for return
address when there is a src and dest overlap in send instruction."
This patch implements this restriction creating new grf127_send_hack_node
at the register allocator. This node has a fixed assignation to grf127.
For vgrf that are used as destination of send messages we create node
interfereces with the grf127_send_hack_node. So the register allocator
will never assign to these vgrf a register that involves grf127.
If dispatch_width > 8 we don't create these interferences to the because
all instructions have node interferences between sources and destination.
That is enough to avoid the r127 restriction.
This fixes CTS tests that raised this issue as they were executed as SIMD8:
dEQP-VK.spirv_assembly.instruction.graphics.8bit_storage.8struct_to_32struct.storage_buffer_*int_geom
Shader-db results on Skylake:
total instructions in shared programs: 7686798 -> 7686797 (<.01%)
instructions in affected programs: 301 -> 300 (-0.33%)
helped: 1
HURT: 0
total cycles in shared programs: 337092322 -> 337091919 (<.01%)
cycles in affected programs: 22420415 -> 22420012 (<.01%)
helped: 712
HURT: 588
Shader-db results on Broadwell:
total instructions in shared programs: 7658574 -> 7658625 (<.01%)
instructions in affected programs: 19610 -> 19661 (0.26%)
helped: 3
HURT: 4
total cycles in shared programs: 340694553 -> 340676378 (<.01%)
cycles in affected programs: 24724915 -> 24706740 (-0.07%)
helped: 998
HURT: 916
total spills in shared programs: 4300 -> 4311 (0.26%)
spills in affected programs: 333 -> 344 (3.30%)
helped: 1
HURT: 3
total fills in shared programs: 5370 -> 5378 (0.15%)
fills in affected programs: 274 -> 282 (2.92%)
helped: 1
HURT: 3
v2: Avoid duplicating register classes without grf127. Let's use a node
with a fixed assignation to grf127 and create interferences to send
message vgrf destinations. (Eric Anholt)
v3: Update reference to CTS VK_KHR_8bit_storage failing tests.
(Jose Maria Casanova)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: 18.1 <mesa-stable@lists.freedesktop.org>
Implement at brw_eu_validate the restriction from Intel Broadwell PRM,
vol 07, section "Instruction Set Reference", subsection "EUISA
Instructions", Send Message (page 990):
"r127 must not be used for return address when there is a src and
dest overlap in send instruction."
v2: Style fixes (Matt Turner)
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: 18.1 <mesa-stable@lists.freedesktop.org>
This uses the common compiler passes abstraction to help radv
avoid fixed cost compiler overheads. This uses a linked list per
thread stored in thread local storage, with an entry in the list
for each target machine.
This should remove all the fixed overheads setup costs of creating
the pass manager each time.
This takes a demo app time to compile the radv meta shaders on nocache
and exit from 1.7s to 1s. It also has been reported to take the startup
time of uncached shaders on RoTR from 12m24s to 11m35s (Alex)
v2: fix llvm6 build, inline emit function, handle multiple targets
in one thread
v3: rebase and port onto new structure
v4: rename some vars (Bas)
v5: drag all code into radv for now, we can refactor it out later
for radeonsi if we make it shareable
v6: use a bit more C++ in the wrapper
v7: logic bugs fixed so it actually runs again.
v8: rebase on top of radeonsi changes.
v9: drop some C++ headers, cleanup list entry
v10: use pop_back (didn't have enough caffeine)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
We were not properly writing page tables when the virtual address
range spans multiple subtrees of the tables.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
The logic was duplicated in a pretty gross way, when what we really need
is just a helper function for stuffing the values in the packet. This
will make implementing noperspective easier.
We weren't using the field yet, so it didn't affect anything.
Fixes: c0476d964a ("v3d: Express dithering mode in the same way that the CLIF parser does.")
Java2d opengl pipeline passes NULL piAttribList to
wglCreatePbufferARB(). So skip parsing the attribute list
if it is NULL.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Neha Bhende <bhenden@vmware.com>
The implementation of CreateRenderPass2 uses the helpers we broke out in
previous commits. The implementations of the new vkCmd functions just
call the old versions.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This makes certain checks a bit easier and means that we don't have
the attachment information duplicated in the attachment list and in
depth_stencil_attachment.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
The OpenGL 3.1 specification, table Table 20.41 ("Implementation
Dependent Values"), defines the minimum-maximum value for
MAX_VERTEX_ATTRIB_STRIDE to be 2048.
So we shouldn't enable OpenGL ES 3.1 on implementations where this
isn't the case. Let's add a check for this
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The OpenGL 4.4 specification, table Table 23.55 ("Implementation
Dependent Values"), defines the minimum-maximum value for
MAX_VERTEX_ATTRIB_STRIDE to be 2048.
So we shouldn't enable OpenGL 4.4 on implementations where this isn't
the case. Let's add a check for this.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
OpenGL 4.4 requires a max vertex attrib of 2048 or higher, but
r600 only supports 2047. Technically, this makes it an GL4.3 GPU,
but it's currently exposing GL4.4.
To avoid regressing the GL version supported in the following
patches, let's just lie and pretend like we support 2048. Any
applications using 2048 are already broken anyway.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This helps us to compact original instruction:
mul(8) g3<1>D g6<8,8,1>UD 0x00000006UD { align1 1Q };
So now we emit:
mul(8) g3<1>UD g6<8,8,1>UD 0x00000006UD { align1 1Q compacted };
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
The number of enabled descriptors for a given pipeline stage
can be computed at compile time.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
fold_assoc() called from fold_alu_op3() can lower the number of src to 2,
which then leads to an invalid access to n.src[2]->gvalue().
This didn't seem to have caused much harm in the past, but on Fedora 28
it will crash (presumably because -D_GLIBCXX_ASSERTIONS is used, although
with libstdc++ 4.8.5 this didn't do anything, -D_GLIBCXX_DEBUG was
needed to show the issue).
An alternative fix would be to instead call fold_alu_op2() from within
fold_assoc() when the number of src is reduced and return always TRUE
from fold_assoc() in this case, with the only actual difference being
the return value from fold_alu_op3() then. I'm not sure what the return
value actually should be in this case (or whether it even can make a
difference).
https://bugs.freedesktop.org/show_bug.cgi?id=106928
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Dave Airlie <airlied@redhat.com>
pthread types are used in some files without explicitely including pthread.h.
This leads to compile errors on Android 7.x nougat-x86
e.g. in src/amd/vulkan/winsys/amdgpu/radv_amdgpu_winsys.h
In file included from external/mesa/src/amd/vulkan/winsys/amdgpu/radv_amdgpu_bo.c:31:
In file included from external/mesa/src/amd/vulkan/winsys/amdgpu/radv_amdgpu_bo.h:32:
external/mesa/src/amd/vulkan/winsys/amdgpu/radv_amdgpu_winsys.h:52:2: error: unknown type name 'pthread_mutex_t'
pthread_mutex_t global_bo_list_lock;
^
1 error generated.
Including pthread.h explicitely solves the building error
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
phi instructions don't have the same results by simply having the same sources.
They need to be inside the same BasicBlock or share an equal condition
resulting into a path through the shader selecting equal sources as well.
short example:
cond = ...;
const0 = 0;
const1 = 1;
if (cond) {
ssa_1 = const0;
} else {
ssa_2 = const1;
}
ssa_3 = phi ssa_1 ssa_2;
if (!cond) {
ssa_4 = const0;
} else {
ssa_5 = const1;
}
ssa_6 = phi ssa_4 ssa_5;
allthough both phis actually have sources with equal results, merging them
would be wrong due to having a different condition selecting which source to
take.
For now we also stick an assert into GlobalCSE, because it should never end up
having to merge phi instructions.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
total instructions in shared programs : 5804448 -> 5804690 (0.00%)
total gprs used in shared programs : 670065 -> 670065 (0.00%)
total shared used in shared programs : 548832 -> 548832 (0.00%)
total local used in shared programs : 21068 -> 21068 (0.00%)
local shared gpr inst bytes
helped 0 0 0 5 5
hurt 0 0 0 191 191
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Commit 5fb69daa6076e56b deleted support from nir_print for printing the
texture and sampler indices on texture instructions. This commit just
brings it back as best as we can.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
At the time of commit 7bc6e455e2 (i965: Add support for saturating
immediates.) we thought mixed type saturates would be impossible. We
were only thinking about type converting moves from D to F, for
example. However, type converting moves w/saturate from F to DF are
definitely possible. This change minimally relaxes the restriction to
allow cases that I have been able trigger via piglit tests.
Fixes new piglit tests:
- arb_gpu_shader_fp64/execution/built-in-functions/fs-sign-sat-neg-abs.shader_test
- arb_gpu_shader_fp64/execution/built-in-functions/vs-sign-sat-neg-abs.shader_test
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
This is achived by copying the sign(abs(x)) optimization from the FS
backend.
On Gen7 an earlier platforms, this fixes new piglit tests:
- glsl-1.10/execution/vs-sign-neg-abs.shader_test
- glsl-1.10/execution/vs-sign-sat-neg-abs.shader_test
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
We could have made this compatible with Python 3 by using:
except Exception as e:
But since none of this code actually uses the exception objects, let's
just drop them entirely.
Signed-off-by: Mathieu Bridon <bochecha@daitauha.fr>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
In Python 2, `print` was a statement, but it became a function in
Python 3.
Using print functions everywhere makes the script compatible with Python
versions >= 2.6, including Python 3.
Signed-off-by: Mathieu Bridon <bochecha@daitauha.fr>
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Dylan Baker <dylan@pnwbakers.com>
per POSIX, limits.h may define PAGE_SIZE when the value is not indeterminate
v2: just change the variable name, since there's no intended correlation
here between this value and the machine's actual page size.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
The bug fixed by the previous commit went undetected because extra
stderr messages are not flagged by the CI. Copy the solution from
fs_visitor::nir_emit_instr and mark the default case unreachable.
An alternate solution is to delete the default case so that the compiler
will issue a warning. That may require more work since there are other
(impossible) cases that exist.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Some of the lowering passes, nir_lower_locals_to_regs for example, can
cause some previously live code to be dead. This pass in particular
leaves a bunch of nir_instr_type_deref instructions floating around.
This causes shader-db runs on Gen5 through Haswell to spew tons of
messages like:
VS instruction not yet implemented by NIR->vec4
UnrealEngine4/EffectsCaveDemo/239.shader_test is one shader that
generates these messages. Cleaning up the dead code fixes that.
To verify, I did a shader-db before and after. Even though all the
messages are gone, the results make my brain hurt. :(
Haswell
total cycles in shared programs: 411890163 -> 411891145 (<.01%)
cycles in affected programs: 57016 -> 57998 (1.72%)
helped: 3
HURT: 11
helped stats (abs) min: 2 max: 154 x̄: 96.67 x̃: 134
helped stats (rel) min: 0.08% max: 2.23% x̄: 1.42% x̃: 1.96%
HURT stats (abs) min: 18 max: 686 x̄: 115.64 x̃: 20
HURT stats (rel) min: 0.81% max: 7.12% x̄: 1.87% x̃: 0.93%
95% mean confidence interval for cycles value: -51.39 191.67
95% mean confidence interval for cycles %-change: -0.14% 2.46%
Inconclusive result (value mean confidence interval includes 0).
Ivy Bridge
total cycles in shared programs: 259114802 -> 259115032 (<.01%)
cycles in affected programs: 24034 -> 24264 (0.96%)
helped: 1
HURT: 9
helped stats (abs) min: 2 max: 2 x̄: 2.00 x̃: 2
helped stats (rel) min: 0.08% max: 0.08% x̄: 0.08% x̃: 0.08%
HURT stats (abs) min: 18 max: 48 x̄: 25.78 x̃: 20
HURT stats (rel) min: 0.80% max: 1.94% x̄: 1.08% x̃: 0.80%
95% mean confidence interval for cycles value: 12.42 33.58
95% mean confidence interval for cycles %-change: 0.54% 1.38%
Cycles are HURT.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Fixes: 5a02ffb733 nir: Rework lower_locals_to_regs to use deref instructions
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
From the ARB_color_buffer_float spec:
35. Should the clamping of fragment shader output gl_FragData[n]
be controlled by the fragment color clamp.
RESOLVED: Since the destination of the FragData is a color
buffer, the fragment color clamp control should apply.
Fixes arb_color_buffer_float-mrt mixed on v3d.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Cleans up the CL of fbo-drawbuffers2-blend a bit. We could do better on
more complicated cases by noticing if multiple RTs have the same blend
state and emitting them in a single packet.
The varying packing would result in st_nir_assign_var_locations() picking
new driver_locations, despite the pipe_stream_output already being set up
for the old driver location. This left the gallium driver with no way to
work back to what varying was referenced by pipe_stream_output.
Fixes these tests on V3D:
dEQP-GLES3.functional.transform_feedback.random.separate.points.3
dEQP-GLES3.functional.transform_feedback.random.separate.points.7
dEQP-GLES3.functional.transform_feedback.random.separate.points.9
dEQP-GLES3.functional.transform_feedback.random.separate.triangles.3
dEQP-GLES3.functional.transform_feedback.random.separate.triangles.8
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Set with_dri from with_gallium when DRI GLX is explicitly configured, as
well as when DRI GLX is chosen automatically.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
If the given image doesn't enable CMASK, FMASK or DCC that's
useless to flush CB metadata.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
GCC 4.8 fails to compile with "static const", while GCC 8.1
fails to compile with only "static".
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
mesa/src/util/u_queue.c:242:15: error: address of array 'queue->name'
will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
Fixes: b238e33bc9 "kutil/queue: add a process name into a thread name"
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
On Python 2, the default JSON separators are ', ' for items and ': ' for
dicts.
On Python 3, the default is the same when no indent is specified, but if
one is (and we do specify one) then the default items separator becomes
',' (the dict separator remains unchanged).
This change explicitly specifies the Python 3 default, which helps
ensuring that the output is identical, whether it was generated by
Python 2 or 3.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
In Python, dictionaries and sets are unordered, and as a result their
is no guarantee that running this script twice will produce the same
output.
Using ordered dicts and explicitly sorting items makes the build more
reproducible, and will make it possible to verify that we're not
breaking anything when we move the build scripts to Python 3.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
For gen8+, write out PPGTT tables in aub files so that full 48-bit
addresses can be serialized.
v2: Fix handling of `end` index in map_ppgtt
v3: Correctly mark GGTT entry as present (Rafael)
Signed-off-by: Scott D Phillips <scott.d.phillips@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
With PPGTT mappings, our aubinator implementation can be quite slow if
we request a buffer that doesn't exist. Instead of doing a PPGTT walk
for invalid addresses (0 lengths), wait until we're sure we want to
decode the data.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
v2: by Lionel
Fix memfd_create compilation issue
Fix pml4 address stored on 32 instead of 64bits
Return no buffer if first ppgtt page is not mapped
v3: Drop additional memfd_create() (Rafael)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
We use memfd to store physical pages as they get read/written to and
the GGTT entries translating virtual address to physical pages.
Based on a commit by Scott Phillips.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
This is a simple, invasive, liberally licensed red-black tree
implementation. It's an invasive data structure similar to the
Linux kernel linked-list where the intention is that you embed a
rb_node struct the data structure you intend to put into the
tree.
The implementation is mostly based on the one in "Introduction to
Algorithms", third edition, by Cormen, Leiserson, Rivest, and
Stein. There were a few other key design points:
* It's an invasive data structure similar to the [Linux kernel
linked list].
* It uses NULL for leaves instead of a sentinel. This means a few
algorithms differ a small bit from the ones in "Introduction to
Algorithms".
* All search operations are inlined so that the compiler can
optimize away the function pointer call.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Now that we're softpinning the address of our BOs in anv & i965, the
addresses selected start at the top of the addressing space. This is a
problem for the current implementation of aubinator which uses only a
40bit mmapped address space.
This change keeps track of all the memory writes from the aub file and
fetch them on request by the batch decoder. As a result we can get rid
of the 1<<40 mmapped address space and only rely on the mmap aub file
\o/
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
On a follow up commit in this series, we stop copying the data from
the mmap'ed file into our big gtt mmap, and start referencing data in
it directly. So reallocating the read buffer and adding more data from
stdin wouldn't work. For that reason, let's stop supporting stdin
process.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Commit f69bc797e1 did the following:
- if format.layout in ('bptc', 'astc'):
+ if format.layout in ('astc'):
The intention was to go from matching either 'bptc' or 'astc' to
matching only 'astc'.
But the new code doesn't respect this intention any more, because in
Python `('astc')` is not a tuple containing a string, it is just the
string. (the parentheses are simply ignored)
That means we now match any substring of 'astc', for example 'a'.
This commit fixes the test to respect the original intention.
Fixes: f69bc797e1 "gallium/auxiliary: Add helper support for
bptc format compress/decompress"
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Always emitting a bottom-of-pipe event is quite dumb. Instead,
start to optimize these functions by syncing PFP for the
top-of-pipe and syncing ME for the post-index-fetch event.
This can still be improved by emitting EOS events for
syncing PS and CS stages.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This introduces radv_barrier() (same as the draw/dispatch codepath).
This helper is used for merging the code from CmdWaitEvents() and
CmdPipelineBarrier because it's quite similar.
We do ignore the source stage mask for CmdWaitEvents because
it's irrelevant when event objects are used.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Structures might be padded by the compiler and these padding bytes remain
un-initialized which in turn makes memcmp return a difference where from
the logical point of view there is none.
Fixes valgrind:
Conditional jump or move depends on uninitialised value(s)
at 0x4C32CBA: __memcmp_sse4_1 (vg_replace_strmem.c:1099)
by 0xB8D2537: r600_set_vertex_buffers (r600_state_common.c:573)
by 0xB71D44A: u_vbuf_set_driver_vertex_buffers (u_vbuf.c:1129)
by 0xB71F7BB: u_vbuf_draw_vbo (u_vbuf.c:1153)
by 0xB3B92CB: st_draw_vbo (st_draw.c:235)
by 0xB36B1AE: vbo_draw_arrays (vbo_exec_array.c:391)
by 0xB36BB0D: vbo_exec_DrawArrays (vbo_exec_array.c:550)
by 0x10A989: piglit_display (textureSize.c:157)
by 0x4F8F174: run_test (piglit_fbo_framework.c:52)
by 0x4F7BA12: piglit_gl_test_run (piglit-framework-gl.c:229)
by 0x10A60A: main (textureSize.c:71)
Uninitialised value was created by a stack allocation
at 0xB3948FD: st_update_array (st_atom_array.c:388)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Below tests would fail with an error message
"Vertex format (R4G4B4A4|R5G5B5A1) not supported."
Add the formate to the translation routine to enable these formats.
Fixes:
dEQP-GLES3.functional.texture.specification.teximage2d_pbo.rgba4_2d
dEQP-GLES3.functional.texture.specification.teximage2d_pbo.rgba4_cube
dEQP-GLES3.functional.texture.specification.teximage2d_pbo.rgb5_a1_2d
dEQP-GLES3.functional.texture.specification.teximage2d_pbo.rgb5_a1_cube
dEQP-GLES3.functional.texture.specification.texsubimage2d_pbo.rgba4_2d
dEQP-GLES3.functional.texture.specification.texsubimage2d_pbo.rgba4_cube
dEQP-GLES3.functional.texture.specification.texsubimage2d_pbo.rgb5_a1_2d
dEQP-GLES3.functional.texture.specification.texsubimage2d_pbo.rgb5_a1_cube
dEQP-GLES3.functional.texture.specification.teximage3d_pbo.rgba4_2d_array
dEQP-GLES3.functional.texture.specification.teximage3d_pbo.rgba4_3d
dEQP-GLES3.functional.texture.specification.teximage3d_pbo.rgb5_a1_2d_array
dEQP-GLES3.functional.texture.specification.teximage3d_pbo.rgb5_a1_3d
dEQP-GLES3.functional.texture.specification.texsubimage3d_pbo.rgba4_2d_array
dEQP-GLES3.functional.texture.specification.texsubimage3d_pbo.rgba4_3d
dEQP-GLES3.functional.texture.specification.texsubimage3d_pbo.rgb5_a1_2d_array
dEQP-GLES3.functional.texture.specification.texsubimage3d_pbo.rgb5_a1_3d
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
For a texture that has only one LOD defined, but for which
GL_TEXTURE_MAX_LEVEL is the default (1000) and
GL_TEXTURE_MIN_LOD != GL_TEXTURE_MAX_LOD the reading from the texture does
not properly resolve the LOD level and texture lookup might fail. Hence,
when no mipmap filter is given (indicating that no mip-mapping takes place),
force the LOD range to contain only value.
Fixes:
dEQP-GLES3.functional.shaders.texture_functions.texture*.(i|u)sampler2d*
dEQP-GLES3.functional.texture.format.sized.cube.rgb*
out of VK_GL_CTS/android/cts/master/gles3-master.txt
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
restart_index is later always used in a comparison, so it should be
initialized properly.
Fixes valgrind warning:
Conditional jump or move depends on uninitialised value(s)
at 0xB8D682F: r600_draw_vbo (r600_state_common.c:2153)
by 0xB71F743: u_vbuf_draw_vbo (u_vbuf.c:1156)
by 0xB3B92DB: st_draw_vbo (st_draw.c:235)
by 0xB36B1AE: vbo_draw_arrays (vbo_exec_array.c:391)
by 0xB36BB0D: vbo_exec_DrawArrays (vbo_exec_array.c:550)
by 0x10A989: piglit_display (textureSize.c:157)
by 0x4F8F174: run_test (piglit_fbo_framework.c:52)
by 0x4F7BA12: piglit_gl_test_run (piglit-framework-gl.c:229)
by 0x10A60A: main (textureSize.c:71)
Uninitialised value was created by a stack allocation
at 0xB3B90B0: st_draw_vbo (st_draw.c:143)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
Its unlikely anyone will add proper ARB_direct_state_access compat
support before we branch 18.2. Enabling the extension in 4.5 at
least allows users to make use of MESA_GL_VERSION_OVERRIDE=4.5COMPAT
for games like No Mans Sky.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The game forgets to enable multiple extensions in its shaders, one
of those extesions is EXT_texture_array. But enabling this config
entry fixes at least one other rendering issue that enabling
EXT_texture_array on its own doesn't fix.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
There is a 15-character limit for thread names shared by the queue name
and process name. Shorten the thread name to make space for the process
name.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Compile times of simple shaders are reduced by ~20%.
Compile times of prologs and epilogs are reduced by up to 40%.
Reviewed-by: Dave Airlie <airlied@redhat.com>
This is basically LLVMTargetMachineEmitToMemoryBuffer inlined and reworked.
struct ac_compiler_passes (opaque type) contains the main pass manager.
ac_create_llvm_passes -- the result can go to thread local storage
ac_destroy_llvm_passes -- can be called by a destructor in TLS
ac_compile_module_to_binary -- from LLVMModuleRef to ac_shader_binary
The motivation is to do the expensive call addPassesToEmitFile once
per context or thread.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Changes in v2:
- make loadSuInfo32() protected without making the rest protected
- move NVC0_SU_INFO_* into nv50_ir_lowering_nvc0.h instead of duplicating
NVC0_SU_INFO_MS
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
In 6f5abf3146 this code was fixed to calculate the maximum size of
an attribute in a seperate pass and then allocate the registers to
that size. However this wasn’t taking into account ranges that overlap
but don’t have the same starting location. For example:
layout(location = 0, component = 0) out float a[4];
layout(location = 2, component = 1) out float b[4];
Previously, if ‘a’ was processed first then it would allocate a
register of size 4 for location 0 and it wouldn’t allocate another
register for location 2 because it would already be covered by the
range of 0. Then if something tries to write to b[2] it would try to
write past the end of the register allocated for ‘a’ and it would hit
an assert.
This patch changes it to scan for any overlapping ranges that start
within each range to calculate the maximum extent and allocate that
instead.
Fixed Piglit’s arb_enhanced_layouts/execution/component-layout/
vs-fs-array-interleave-range.shader_test
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Fixes: 6f5abf3146 "i965: Fix output register sizes when multiple variables
share a slot."
The current code causes:
/usr/include/c++/8/debug/safe_iterator.h:207:
Error: attempt to copy from a singular iterator.
This is due to the iterators getting invalidated, fix the
reverse iterator to use the return value from erase, and
cast it properly.
(used Mathias suggestion)
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
This ports radv to the shared code, however due to a bug in LLVM
version prior to 7, radv cannot add target info at this stage,
as it would leak one for every shader compile, however I'd prefer
to keep this llvm damage in the shared code, since it isn't the
driver at fault here. We just add a flag to denote if the driver
can support leaking the target info or not, and the common code
does the right thing depending on the llvm version.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We want to share this code with radv in the future, so port
it out of radeonsi.
Add a return value as radv will want that to know if this
succeeds
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
As precursor to moving init to common code, just rename the struct
and move it.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This adds a inline always pass, but otherwise should work the
same.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This just splits out the non-shared code and reuses ac_get_llvm_target in radv.
v2: rebase on Marek's patch - fixup brace position/whitespace
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
From the SPIR-V 1.0 specification, section 3.32.18, "Atomic
Instructions":
"OpAtomicIDecrement:
<skip>
The instruction's result is the Original Value."
However, we were implementing it, for uniform atomic counters, as a
pre-decrement operation, as was the one available from GLSL.
Renamed the former nir intrinsic 'atomic_counter_dec*' to
'atomic_counter_pre_dec*' for clarification purposes, as it implements
a pre-decrement operation as specified for GLSL. From GLSL 4.50 spec,
section 8.10, "Atomic Counter Functions":
"uint atomicCounterDecrement (atomic_uint c)
Atomically
1. decrements the counter for c, and
2. returns the value resulting from the decrement operation.
These two steps are done atomically with respect to the atomic
counter functions in this table."
Added a new nir intrinsic 'atomic_counter_post_dec*' which implements
a post-decrement operation as required by SPIR-V.
v2: (Timothy Arceri)
* Add extra spec quotes on commit message
* Use "post" instead "pos" to avoid confusion with "position"
Signed-off-by: Antia Puentes <apuentes@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This is mostly just a straight-forward conversion of
link_assign_atomic_counter_resources to C directly using nir variables
instead of GLSL IR variables.
It is based on the version of link_assign_atomic_counter_resources in
6b8909f2d1. I’m noting this here to make it easier to track changes
and keep the NIR version up-to-date.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Capability that informs if atomic counters are supported. From SPIR-V
1.0 spec, section 3.7, "Storage Class", item 10 from table:
(Column "Storage Class"):
"AtomicCounter For holding atomic counters. Visible across all
functions of the current invocation. Atomic counter-specific
memory."
(Column "Required Capability"):
"AtomicStorage"
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This is convenient when dealing with atomic counter uniforms. The
alternative would be doing that at vtn_handle_atomics.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
When constructing NIR if we have a SPIR-V uint variable and the
storage class is SpvStorageClassAtomicCounter, we store as NIR's
glsl_type an atomic_uint to reflect the fact that the variable is an
atomic counter.
However, we were tweaking the type only for atomic_uint scalars, we
have to do it as well for atomic_uint arrays and atomic_uint arrays of
arrays of any depth.
Signed-off-by: Antia Puentes <apuentes@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
v2: update after deref patches got pushed (Alejandro Piñeiro)
v3: simplify repair_atomic_type (suggested by Timothy Arceri, included
on the patch by Alejandro)
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
GLSL types differentiates uint from atomic uint. On SPIR-V the type is
uint, and the variable has a specific storage class. So we need to
tweak the type based on the storage class.
Ideally we would like to get the proper type at vtn_handle_type, but
we don't have the storage class at that moment.
We tweak only the nir type, as is the one that really requires it.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Also initialize it on var_decoration_cb
This is equivalent to nir_variable.offset, used to store the location
an atomic counter is stored at.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
ARB_gl_spirv points that uniforms in general need explicit
location. But there are still some cases of uniforms without location,
like for example uniform atomic counters. Those doesn't have a
location from the OpenGL point of view (they are identified with a
binding and offset), but Mesa internally assigns it a location.
Signed-off-by: Eduardo Lima <elima@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Signed-off-by: Neil Roberts <nroberts@igalia.com>
v2: squash with another patch, minor variable name tweak (Timothy
Arceri)
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This includes:
* Move the defition of empty_uniform_block to linker_util.h
* Move find_empty_block (with a rename) to linker_util.h
* Refactor some code at linker.cpp to a new method at linker_util.h
(link_util_update_empty_uniform_locations)
So all that code could be used by the GLSL linker and the NIR linker
used for ARB_gl_spirv.
v2: include just "ir_uniform.h" (Timothy Arceri)
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This is the wrong kind of dirty bit. Caught by GCC warnings, due to
64-bit values being truncated to 32 bits.
Fixes: b95b0e2918 (intel/anv,blorp,i965: Implement the SKL 16x MSAA SIMD32 workaround)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The Vulkan API provides a mechanism for applications to cache their own
shaders and manage on-disk pipeline caching themselves. Generally, this
is what I would recommend to application developers and I've resisted
implementing driver-side transparent caching in the Vulkan driver for a
long time. However, not all applications do this and, for some
use-cases, it's just not practical.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Before, we were only hashing the shader if we had a shader cache to
cache things in. This means that if we ever get it wrong, we could end
up trying to cache a shader with an undefined hash. Since not having a
shader cache is an extremely uncommon case, let's optimize for code
clarity and obvious correctness over avoiding a hash operation.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
If a client is dumb enough to not specify a pipeline cache, give it a
default. We have to create one anyway for blorp so we may as well let
the client cache shaders in it.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Previously, we just hashed the entire descriptor set layout verbatim.
This meant that a bunch of extra stuff such as pointers and reference
counts made its way into the cache. It also meant that we weren't
properly hashing in the Y'CbCr conversion information information from
bound immutable samplers.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
According to RenderDoc, this shaves 99.6% of the run time off of the
ambient occlusion pass in Skyrim Special Edition when running under DXVK
and shaves 92% off the runtime for a reasonably representative frame.
When running the actual game, Skyrim goes from being a slide-show to a
very stable and playable framerate on my SKL GT4e machine.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This pass searches for reasonably large local variables which can be
statically proven to be constant and moves them into shader constant
data. This is especially useful when large tables are baked into the
shader source code because they can be moved into a UBO by the driver to
reduce register pressure and make indirect access cheaper.
v2 (Jason Ekstrand):
- Use a size/align function to ensure we get the right alignments
- Use the newly added deref offset helpers
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This commit adds a concept to NIR of having a blob of constant data
associated with a shader. Instead of being a UBO or uniform that can be
manipulated by the client, this constant data considered part of the
shader and remains constant across all invocations of the given shader
until the end of time. To access this constant data from the shader, we
add a new load_constant intrinsic. The intention is that drivers will
eventually lower load_constant intrinsics to load_ubo, load_uniform, or
something similar. Constant data will be used by the optimization pass
in the next commit but this concept may also be useful for OpenCL.
v2 (Jason Ekstrand):
- Rename num_constants to constant_data_size (anholt)
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
These are very similar to the related function in nir_lower_io except
that they don't handle per-vertex or packed things (that could be added,
in theory) and they take a more detailed size/align function pointer.
One day, we should consider switching nir_lower_io over to using the
more detailed size/align functions and then we could make it use these
helpers instead of having its own.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The size and alignment are "natural" in the sense that everything is
aligned to a scalar. This is a bit tighter than std430 where vec3s are
required to be aligned to a vec4.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2 (Jason Ekstrand):
- Rename y to pot_align (Brian)
- Also use ALIGN_POT in build_id.c and slab.c (Brian)
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Fixes warning at screen creation. We store our outputs in normal temps
and just emit them to shader I/O at the end, due to our I/O ordering
requirements, so reading "outputs" in NIR is fine.
this will be needed for compatibility profiles
v2: handle tess shaders
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
When building with asserts enabled, we'll end up triggering an assert
in pipe_buffer_map_range down this code-path, due to trying to map
an empty range. Even if we avoid that, we'll trigger another assert
a bit later, because u_vbuf_get_minmax_index returns a min-index of
-1 here, which gets promoted to an unsigned value, and gives us an
out-of-bounds buffer-mapping offset.
Since we can't really have a well-defined min/max range here when
the range is empty anyway, we should just drop this dance in the
first place. After all, no rendering is going to be produced.
This fixes a crash in dEQP-GLES31.functional.draw_indirect.random.0
on VirGL for me.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
After performing a fast-clear eliminate, a FMASK decompress,
or a DCC decompress, we can reset the predicate to FALSE.
With that, the GPU should be able to skip unnecessary color
decompression passes.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Performing a DCC decompression pass is currently pretty rare,
but using predication allows the GPU to skip unnecessary passes.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Use caps to obtain the multisample sample positions for up to 16
positions and implement the according Gallium interface.
This implemenation (plus its counterpart in virglrenderer) assume that
the fixed sample position are always the same for a given number of samples
over the whole live time of a qemu session. It also assumes that sample
series are only given for 2, 4, 8, and 16 samples, and for intermediate
numbers N of samples the next higher supported set from above list is picked
and the sample positions for the first N samples are returned accordingly.
Fixes (when run on GL host):
dEQP-GLES31.functional.texture.multisample.samples_1.sample_position
dEQP-GLES31.functional.texture.multisample.samples_2.sample_position
dEQP-GLES31.functional.texture.multisample.samples_3.sample_position
dEQP-GLES31.functional.texture.multisample.samples_4.sample_position
dEQP-GLES31.functional.texture.multisample.samples_8.sample_position
dEQP-GLES31.functional.texture.multisample.samples_10.sample_position
dEQP-GLES31.functional.texture.multisample.samples_12.sample_position
dEQP-GLES31.functional.texture.multisample.samples_13.sample_position
dEQP-GLES31.functional.texture.multisample.samples_16.sample_position
v2: remove unrelated chunk (thanks Ilia Mirkin)
v3: - also return positions for intermediate sample counts
- fix unused varible warning
- update description
v4: explain better what this patch assumes and how it handles sample numbers
that are not directly advertised (thanks go to Erik Faye-Lund for making
me aware that this should be documented)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
and PIPE_FORMAT_R8G8B8A8_SRGB, as well.
The reason for this is that when Virgl runs with GLES on the host, it
cannot directly upload textures in BGRA.
So to avoid a conversion step, consider the RGB sRGB formats as well for
this extension.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
If the driver doesn't support PIPE_FORMAT_B8G8R8A8_SRGB, fall back to
PIPE_FORMAT_R8G8B8A8_SRGB.
Drivers such as Virgl will have a hard time supporting
PIPE_FORMAT_B8G8R8A8_SRGB when the host runs GLES, as GL_BGRA isn't as
well suported there.
So go with PIPE_FORMAT_R8G8B8A8_SRGB so these drivers can avoid a
conversion copy.
v2: Fix typo in commit message
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
When Mesa itself implements ETC2 decompression, it currently
decompresses to formats in the GL_BGRA component order.
That can be problematic for drivers which cannot upload the texture data
as GL_BGRA, such as Virgl when it's backed by GLES on the host.
So this commit adds a flag to _mesa_unpack_etc2_format so callers can
specify the optimal component order.
In Gallium's case, it will be requested if the format isn't in
PIPE_FORMAT_B8G8R8A8_SRGB format.
For i965, it will remain GL_BGRA, as before.
v2: * Remove unnecesary include (Emil Velikov)
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We need to add loop terminators to the list in the order we come
across them otherwise if two or more have the same exit condition
we will select that last one rather than the first one even though
its unreachable.
This fix is for simple unrolls where we only have a single exit
point. When unrolling these type of loops the unreachable
terminators and their unreachable branch are removed prior to
unrolling. Because of the logic change we also switch some
list access in the complex unrolling logic to avoid breakage.
Fixes: 6772a17acc ("nir: Add a loop analysis pass")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The spec doesn't explicitly say to generate an error but since
DrawArraysInstanced* and DrawElementsInstanced* do, it makes
sense to do it for these functions also.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The extension is enabled for compat profile but there is currently
no display list support.
I filed a spec bug and it has been agreed that
glDispatchComputeIndirect should generate an INVALID_OPERATION
error when called during display list compilation.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
this is required for Drivers which don't allow reading from outputs.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
We were overlapping it with the threadable/nan flags, resulting in
incorrect relocations (threadable/nan included in the offset) and wrong
ordering in the CLIF files.
The XML ends up noisier if you're only looking at one version, but from
the diffstat there's obvious wins in terms of deduplication. This will
get even more significant if we ever support 3.2 or 4.0.
The XML zipper wants one XML per version for filling out its tables, but
we want to do more than one GPU version per XML now. Assume that the
"gen" field will be the same as min_ver and look up our XML text assuming
that they're listed in increasing min_ver.
It turns out that most V3D versions change very few packets, so keeping
separate copies of the XML per version makes changing the XML a pain as
you have to replicate your changes to each one. This is the start of
changing it so that one XML can generate headers for multiple versions.
Running VK-CTS in batch execution mode was raising the
VK_ERROR_INITIALIZATION_FAILED error in multiple tests. But when the
same failing tests were run isolated they always passed.
createDevice and destroyDevice were called before and after every
tests. Because the binding_table_pool was never closed, we reached the
maximum number of open file descriptors (ulimit -n) and when that
happened every call to createDevice implied a
VK_ERROR_INITIALIZATION_FAILED error.
Fixes: c7db0ed4e9
("anv: Use a separate pool for binding tables when soft pinning")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Having this if statement here prevented the next if statement from being
reached in the case of image stores, which is needed for instructions with
indirect bindless handles like "STORE TEMP[ADDR[2].x+1](1) ...".
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
There is a parallel make build issue in src/egl/drivers/dri2/
for wayland builds. Can be reproduced with:
$ rm src/egl/drivers/dri2/*.h src/egl/drivers/dri2/platform_wayland.lo
$ make -C src/egl/ drivers/dri2/platform_wayland.lo
../../../mesa-18.1.2/src/egl/drivers/dri2/platform_wayland.c:50:10: fatal error: linux-dmabuf-unstable-v1-client-protocol.h: No such file or directory
This patch adds the missing dependency.
Fixes: 02cc359372 "egl/wayland: Use linux-dmabuf interface for buffers"
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
[Eric: fixed up the commit title]
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Add support for glsl 'invariant' modifier for output data declarations.
Gallium drivers that use TGSI serialization currently loose invariant
modifiers in glsl shaders.
v2: use boolean for invariant instead of unsigned.
Tested: chromiumos on qemu with virglrenderer.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
There's no reason for us to emit it a pile of times and then have a
whole pass to clean it up. Just emit it once like we really want.
Reviewed-by: Matt Turner <mattst88@gmail.com>
This generalizes the unlit centroid workaround so it's less code and now
supports SIMD32.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
v2 (Jason Ekstrand):
- Disallow gl_SampleId in SIMD32 on gen7
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
And handle 32-wide payload register reads in fetch_payload_reg().
v2 (Jason Ekstrand);
- Fix some whitespace and brace placement
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
While we're here, we change to using horiz_offset() instead of abusing
half().
v2 (Jason Ekstrand):
- Use horiz_offset() instead of half()
Reviewed-by: Matt Turner <mattst88@gmail.com>
The original code manually handled splitting the MOVs to 8-wide to
handle various regioning restrictions. Now that we have a SIMD width
splitting pass that handles these things, we can just emit everything at
the full width and let the SIMD splitting pass handle it. We also now
have a useful "subscript" helper which is designed exactly for the case
where you want to take a W type and read it as a vector of Bs so we may
as well use that too.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
On g4x through Sandy Bridge, src1 (the coordinates) of the PLN
instruction is required to be an even register number. When it's odd
(which can happen with SIMD32), we have to emit a LINE+MAC combination
instead. Unfortunately, we can't just fall through to the gen4 case
because the input registers are still set up for PLN which lays out the
four src1 registers differently in SIMD16 than LINE.
v2 (Jason Ekstrand):
- Take advantage of both accumulators and emit LINE LINE MAC MAC
(Based on a patch from Francisco Jerez)
- Unify the gen4 and gen4x-6 cases using a loop
v3 (Jason Ekstrand):
- Don't unify gen4 with gen4x-6 as this turns out to be more fragile
than first thought without reworking the gen4 barycentric coordinate
layout.
Reviewed-by: Matt Turner <mattst88@gmail.com>
When we don't have PLN (gen4 and gen11+), we implement LINTERP as either
LINE+MAC or a pair of MADs. In both cases, the accumulator is written
by the first of the two instructions and read by the second. Even
though the accumulator value isn't actually ever used from a logical
instruction perspective, it is trashed so we need to make the scheduler
aware. Otherwise, the scheduler could end up re-ordering instructions
and putting a LINTERP between another an instruction which writes the
accumulator and another which tries to use that result.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Matt Turner <mattst88@gmail.com>
This reworks INTERPOLATE_AT_PER_SLOT_OFFSET to work more like an ALU
operation and less like a send. This is less code over-all and, as a
side-effect, it now properly handles execution groups and lowering so
SIMD32 support just falls out.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
We want consistent behavior in the meaning of the flag_subreg field
between SNB and IVB+.
v2 (Jason Ekstrand):
- Add some extra commentary
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This prevents a crash in some arb_enhanced_layouts tests that would be
caused by the next commit.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Current discard handling requires dedicating the second flag register to
discard. However, control-flow in SIMD32 requires both flag registers
so it's incompatible with the current discard handling. Just don't
support SIMD32+discard for now.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The hardware's control flow logic is 16-wide so we're out of luck
here. We could, in theory, support SIMD32 if we know the control-flow
is uniform but we don't have that information at this point.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Commit 0d905597f fixed an issue with the placement of the zip and unzip
instructions. However, as a side-effect, it reversed the order in which
we were emitting the split instructions so that they went from high
group to low instead of low to high. This is fine for most things like
texture instructions and the like but certain render target writes
really want to be emitted low to high. This commit just switches the
order back around to be low to high.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Fixes: 0d905597f "intel/fs: Be more explicit about our placement of [un]zip"
The pixel shader dispatch table is kind-of a confusing mess. This adds
some helpers for dealing with it and for easily extracting the correct
data from wm_prog_data.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Doing instruction header setup in the generator is awful for a number
of reasons. For one, we can't schedule the header setup at all. For
another, it means lots of implied writes which the instruction scheduler
and other passes can't properly read about. The second isn't a huge
problem for FB writes since they always happen at the end. We made a
similar change to sampler handling in ff4726077d.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Now that we have the implied header in src[0] for tracking purposes, we
may as well use it in the generator. This makes things a tiny bit more
general.
Reviewed-by: Matt Turner <mattst88@gmail.com>
The FB write opcode on gen4-5 does implied copies from g0 and g1 to the
message payload. With this commit, we start tracking that as part of
the IR by having the FB write read from g0-1.
Reviewed-by: Matt Turner <mattst88@gmail.com>
It doesn't matter since we don't ever run replicated write shaders
through the optimizer but it's good to be complete.
Reviewed-by: Matt Turner <mattst88@gmail.com>
With this commit, things no longer break if NVC0_CB_AUX_TEX_INFO is
changed to anything other than 0x20.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Previously, TargetNVC0::insnCanLoadOffset() returned whether the offset
could be set to a specific value. The IndirectPropagation pass expected
it to return whether the offset could be increased by a specific value,
which is what TargetNV50::insnCanLoadOffset() does.
Fixes: 37b67db6ae
("nvc0/ir: be careful about propagating very large offsets into const load")
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Fix build error after llvm-7.0svn r332881 ("CodeGen: Add a dwo output
file argument to addPassesToEmitFile and hook it up to dwo output.").
CXX rasterizer/jitter/libmesaswr_la-JitManager.lo
rasterizer/jitter/JitManager.cpp:368:93: error: too few arguments to function call, expected at least 4, have 3
pTarget->addPassesToEmitFile(*pMPasses, filestream, TargetMachine::CGFT_AssemblyFile);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Chromium OS uses Autotools and pkg-config when building Mesa for
Android. The gallium drivers were failing to find the headers and
libraries for zlib and Android's libbacktrace.
v2:
- Don't add a check for zlib.pc. configure.ac already checks for
zlib.pc elsewhere. [for tfiga]
- Check for backtrace.pc separately from the other Android libs.
[for tfiga]
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The spec allows adding scalars with a vector or matrix. In this case
the opt was losing swizzle and size information.
This fixes a bug with Doom (2016) shaders.
Fixes: 34ec1a24d6 ("glsl: Optimize (x + y cmp 0) into (x cmp -y).")
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The memzone and flags parameters were accidentally flipped in the call
from brw_bo_alloc_tiled_2d.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Instead of encouraging the client to re-create the swapchain and keep
going with an OUT_OF_DATE error, tell the client that further use of
the current surface will not succeed as the associated kernel objects
are no longer valid.
In particular, when a DRM lease is revoked, then the client needs to
get another lease and create a new surface for that.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The always_active_io flag was only set according to the first variable
that got packed in, so NIR io compaction would end up compacting XFB
varyings that shouldn't move at that point.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Right now, we name these fields as "field name minus one" so that your C
code obviously states what the value should be. However, it's easy enough
to handle at the codegen level with another little XML attribute, meaning
less C code and easier-to-read values in CLIF dumping and gdb as well.
(The actual CLIF format for simulator and FPGA replay takes in
pre-minus-one values, so we need it there too).
The Vulkan spec says:
"pipelineBindPoint is a VkPipelineBindPoint indicating whether
the descriptors will be used by graphics pipelines or compute
pipelines. There is a separate set of bind points for each of
graphics and compute, so binding one does not disturb the other."
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Now that SSA values can be derefs and they have special rules, we have
to be a bit more careful about our LCSSA phis. In particular, we need
to clean up in case LCSSA ended up creating a phi node for a deref.
This fixes validation issues with some Vulkan CTS tests with the new
deref instructions.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Ported from RadeonSI.
This appears to fix some random fails with:
dEQP-VK.query_pool.statistics_query.*
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The driver already supports exporting the stencil value.
The following CTS test now pass:
dEQP-VK.pipeline.shader_stencil_export.op_replace
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
We can not use the VUE Dereference flags combination for EOT
message under ILK and SNB because the threads are not initialized
there with initial VUE handle unlike Pre-IL.
So to avoid GPU hangs on SNB and ILK we need
to avoid usage of the VUE Dereference flags combination.
(Was tested only on SNB but according to the specification
SNB Volume 2 Part 1: 1.6.5.3, 1.6.5.6
the ILK must behave itself in the similar way)
v2: Approach to fix this issue was changed.
Instead of different EOT flags in the program end
we will create VUE every time even if GS produces no output.
v3: Clean up the patch.
Signed-off-by: Andrii Simiklit <andrii.simiklit@globallogic.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105399
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Tested-by: Mark Janes <mark.a.janes@intel.com>
The radeon winsys isn't linked against the ac code, I have vague
memories of this causing some problems before, for now fix the build
but just duplicating the code.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Some fields shouldn't be initialized, like framebuffers_bound and other stats.
It's hopefully complete now.
Cc: 18.1 <mesa-stable@lists.freedesktop.org>
This patch both adds support for probing & filtering DRM nodes
and switches away from using the GRALLOC_MODULE_PERFORM_GET_DRM_FD
gralloc call.
Currently the filtering is based just on the driver name,
and the desired name is supplied using the "drm.gpu.vendor_name"
Android property.
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Maintaining both flink names and prime fd support which are provided by
2 different gralloc implementations is problematic because we have a
dependency on a specific gralloc implementation header.
This mostly disables the dependency on the gralloc implementation and
headers. The dependency on GRALLOC_MODULE_PERFORM_GET_DRM_FD remains for
now, but the definition is added locally to remove the header
dependency.
drm_gralloc support can be enabled by setting
BOARD_USES_DRM_GRALLOC=true in BoardConfig.mk.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
If the driver ends up by performing a slow depthstencil clear,
the HTILE metadata won't be initialized correctly.
This fixes random VM faults on Polaris while running CTS
with Bas's runner. This doesn't seem to regress performance.
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
For instruction sequences that change the address register with every load
the current limit to bail out of the scheduler and reject the optimisation
was too tight, i.e. it was expected that at least one pending instruction
would be scheduled each time.
Give the scheduler more margin to sort out these load sequences by allowing
a number of rounds where no instruction is scheduled.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106163
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This patch is based on
https://lists.freedesktop.org/archives/mesa-dev/2018-February/185805.html
Dave Airlie:
"A bunch of CTS tests led me to write
tests/shaders/ssa/fs-while-loop-rotate-value.shader_test
which r600/sb always fell over on.
GCM seems to move some of the copies into other basic blocks,
if we don't allow this to happen then it doesn't seem to schedule
them badly.
Everything I've read on SSA/phi copies say they have to happen
in parallel, so keeping them in the same basic block seems like
a good way to keep some of that property."
This patch differs from the one proposed by Dave in that it only adds
the NF_DONT_MOVE flag to copy_move instructions that are created by split_phi*
and that are located in loops.
Fixes piglit: tests/shaders/ssa/fs-while-loop-rotate-value.shader_test
(no regressions in the shader set). It also fixes all failing tests from
dEQP-GLES3.functional.shaders.loops.*
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This was mistakenly exposed, even though we want atomic counters to be
lowered to atomic ops on an SSBO like nearly every other GPU. Which
somehow recently started getting segfaults due to calling a null
pipe->set_hw_atomic_buffers().
Fixes a crash in stk, and probably other things.
Signed-off-by: Rob Clark <robdclark@gmail.com>
This extension provides fences and frame count information to direct
display contexts. It uses new kernel ioctls to provide 64-bits of
vblank sequence and nanosecond resolution.
v2:
Rework fence integration into the driver so that waiting for
any of a mixture of fence types (wsi, driver or syncobjs)
causes the driver to poll, while a list of just syncobjs or
just driver fences will block. When we get syncobjs for wsi
fences, we'll adapt to use them.
v3: Adopt Jason Ekstrand's coding conventions
Declare variables at first use, eliminate extra whitespace between
types and names. Wrap lines to 80 columns.
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
v4: Adapt to WSI fence API change. It now returns VkResult and
no longer has an option for relative timeouts.
v5: wsi_register_display_event and wsi_register_device_event now
use the default allocator when NULL is provided, so remove the
computation of 'alloc' here.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This extension provides fences and frame count information to direct
display contexts. It uses new kernel ioctls to provide 64-bits of
vblank sequence and nanosecond resolution.
v2: Adopt Jason Ekstrand's coding conventions
Declare variables at first use, eliminate extra whitespace between
types and names. Wrap lines to 80 columns.
Add extension to list in alphabetical order
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
v3: Adapt to WSI fence API change. It now returns VkResult and
no longer has an option for relative timeouts.
v4: wsi_register_display_event and wsi_register_device_event now
use the default allocator when NULL is provided, so remove the
computation of 'alloc' here.
v5: use zalloc2 instead of alloc2 for the WSI fence.
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
This extension provides fences and frame count information to direct
display contexts. It uses new kernel ioctls to provide 64-bits of
vblank sequence and nanosecond resolution.
v2: Remove DRM_CRTC_SEQUENCE_FIRST_PIXEL_OUT flag. This has
been removed from the proposed kernel API.
Add NULL parameter to drmCrtcQueueSequence ioctl as we
don't care what sequence the event was actually queued to.
v3: Adapt to pthread clock switch to MONOTONIC
v4: Fix scope for wsi_display_mode andwsi_display_connector allocs
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
v5: Adopt Jason Ekstrand's coding conventions
Declare variables at first use, eliminate extra whitespace between
types and names. Wrap lines to 80 columns.
Use wsi_rel_to_abs_time helper function to convert relative
timeouts to absolute timeouts without causing overflow.
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
v6:
Change WSI fence wait function to return VkResult instead of
bool. This makes the meaning of the return value easier to
understand, and allows for the indication of failure.
Also change the WSI fence wait function to take only absolute
timeouts and not provide an option for a relative timeout. No
users wanted relative timeouts, and it's simpler if that option
isn't available.
Terminate the DPMS property loop once we've found the property.
Assert that the fence hasn't already been destroyed in
wsi_display_fence_destroy.
Rearrange the event handler function order in the file to place
routines in an easier to find order.
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
v7:
Adapt to API changes for surface_get_capabilities
v8:
Use wsi->alloc in register_display_event so that callers
don't have to dig out an allocator for us.
v9:
Fix a few minor formatting issues
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
v10:
Use wsi->alloc if none provided in wsi_display_fence_alloc.
Now that drivers are expected to pass the allocator argument
straight through from the application, we need to check those
for NULL everywhere.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Handle the case where the set of fences to wait for is not all of the
same type by either waiting for them sequentially (waitAll), or
polling them until the timer has expired (!waitAll). We hope the
latter case is not common.
While the current code makes sure that it always has fences of only
one type, that will not be true when we add WSI fences. Split out this
refactoring to make merging that clearer.
v2: Adopt Jason Ekstrand's coding conventions
Declare variables at first use, eliminate extra whitespace between
types and names. Wrap lines to 80 columns.
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
v2:
Cast INT64_MAX to uint64_t to make of its use as the maximum
possible timeout clearly unsigned to the reader.
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Make anv_wait_for_fences with !waitAll check all fences at least
once, even if the requested timeout has already passed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Note that this patch needs to come late in the series since this pass
can be run after any pass that damages nir_metadata_loop_analysis.
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This deletes support for _var intrinsics and legacy deref chains in
favor of deref instructions. The internals are also reworked a bit to
use deref instructions directly.
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
No one is currently using so we can make this change irrespective of
driver. We may use it again in i965 so it's best to pretend to keep it
working.
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This commit reworks nir_lower_vars_to_ssa to use deref instructions and
deref paths internally instead of deref chains. We also drop support
for the old load/store/copy_var intrinsics.
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This makes us build the is_direct parameter as the nodes are constructed
rather than as we walk the chain. This will be useful later.
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
vc4+vc5 is not really effected by the deref chain to deref instr
conversion, so it no longer needs this pass. For others, now that
all the passes mesa/st uses are using deref instructions, push the
lowering to deref chains back into driver.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We change glsl_to_nir to provide derefs for bot textures and samplers
while we're at it. This makes the lowering much easier since we only
either replace sources or remove them.
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
To simplify the transition, and make things bisectable, split out a
legacy copy or lower_samplers. This way the i965 and gallium drivers
can independently switch over to deref instructions.
Since the lower_samplers_as_deref pass is only used by gallium drivers,
it can be converted in lock-step with moving the lower_deref_instrs
pass, and so does not need a corresponding _legacy clone.
This legacy pass will be removed in a future commit.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Since we had to rewrite the deref walking loop anyway, I took the
opportunity to make it a bit clearer and more efficient. In particular,
in the AoA case, we will now emit one minmax instead of one per array
level.
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This commit removes most of the deref instruction lowering. Instead of
lowering early, we only lower textures and images and we only do so
right before any of the anv image lowering passes.
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This commit completely reworks function calls in NIR. Instead of having
a set of variables for the parameters and return value, nir_call_instr
now has simply has a number of sources which get mapped to load_param
intrinsics inside the functions. It's up to the client API to build an
ABI on top of that. In SPIR-V, out parameters are handled by passing
the result of a deref through as an SSA value and storing to it.
This virtue of this approach can be seen by how much it allows us to
delete from core NIR. In particular, nir_inline_functions gets halved
and goes from a fairly difficult pass to understand in detail to almost
trivial. It also simplifies spirv_to_nir somewhat because NIR functions
never were a good fit for SPIR-V.
Unfortunately, there is no good way to do this without a mega-commit.
Core NIR and SPIR-V have to be changed at the same time. This also
requires changes to anv and radv because nir_inline_functions couldn't
handle deref instructions before this change and can't work without them
after this change.
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We were only initializing vtn_builder::func for the pre-walk where we
build the CFG. We were only initializing the nir_builder for the later
walk through the instructions even though were were setting b->cursor
for the pre-walk. Let's set both both places so that everything is
consistent. This useful because we handle OpFunctionParameter in the
pre-walk and we're going to need to be able to emit instructions.
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously, pointers fell into two categories: index/offset for UBOs,
SSBOs, etc. and var + access chain for logical pointers. This commit
adds another logical pointer mode that's deref + access chain.
It's tempting to think that we can just replace variable-based pointers
with deref-based or at least replace the access chain with a deref
chain. Unfortunately, there are a few sticky bits that prevent this:
1) We can't return deref-based pointers from OpVariable because those
opcodes may come outside of a function so there's no place to emit
the deref instructions.
2) We can't always use variable-based pointers because we may not
always know the variable. (We do now, but he upcoming function
rework will take that option away.)
3) We also can't replace the access chain struct with a deref. Due to
the re-ordering we do in order to handle loop continues, the derefs
we would emit as part of OpAccessChain may not dominate their uses.
We normally fix this up with nir_repair_ssa but that generates phi
nodes which we don't want in the middle of our deref chains.
All in all, we have no real better option than to support partial access
chains while also re-emitting the deref instructions on the spot.
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Push constants have been a weird edge-case for a while in that they have
explitic offsets but we've been internally building access chains for
them. This mostly works but it means that passing pointers to push
constants through as function arguments is broken. The easy thing to do
for now is to just treat them like UBOs or SSBOs only without a block
index. This does loose a bit of information since we no longer have an
accurate access range and any indirect access will look like it could
read the whole block. Unfortunately, there's not much we can do about
that. Once NIR derefs get a bit more powerful, we can plumb these
through as derefs and be able to reason about them again.
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Before, we were doing structure splitting in spirv_to_nir.
Unfortunately, this doesn't really work when you think about passing
struct pointers into functions. Doing it later in NIR is a much better
plan.
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This adds a concept of "members" to a variable with an interface type.
It allows you to specify the full variable data for each member of the
interface instead of once for the variable. We also add a lowering pass
to lower those variables to a sequence of variables and rewrite all the
derefs accordingly.
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This should make nir_lower_tex properly handle deref instructions as
well as make it more correct when texture arrays are used and it's
called after lowering samplers to binding table indices.
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This pass doesn't handle deref instructions yet. Making it handle both
legacy derefs and deref instructions would be painful. Since it's not
important for correctness, just disable it for now.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This commit introduces a new nir_deref.h header for helpers that are
less common and really only needed by a few heavy-duty passes. In this
header is a new struct for representing a full deref path which can be
walked in either direction.
v2 (Jason Ekstrand):
- Assert that deref != NULL (Caio)
- Fill _short_path with 0xdeadbeef in debug builds when not used (Caio)
- Make nir_deref_path a typedef (Rob)
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Non-intrinsic function handling has never actually been tested and
probably doesn't work. Just get rid of it for now. We can always add
it back in later if it's useful.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This will be removed at the end of the transition, but add some tracking
plus asserts to help ensure that lowering passes are called at the
correct point (pre or post deref instruction lowering) as passes are
converted and the point where lower_deref_instrs() is called is moved.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This commit adds a new instruction type to NIR for handling derefs.
Nothing uses it yet but this adds the data structure as well as all of
the code to validate, print, clone, and [de]serialize them.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This moves the switch statement for specific intrinsics above source and
destination validation. We also rework the source and destination
validation to use different bit_size values for each source and/or
destination.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
fix spilling regression introduced by 5428066f5e
this is just a minor mistake done while moving the code out into a new
function. The function contained a loop which might have been terminated
earlier and skipped setting noSpill to 1. After the refactoring it was always
set.
Fixes: 5428066f5e
("nv50/ir: make a copy of tex src if it's referenced multiple times")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
The same as the previous two patches, but for the libva state tracker.
Fixes: 724916c8a8
("meson: dedup gallium-xvmc logic")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
This fixes the same problem as the previous patch did for vdpau, but for
xvmc.
Fixes: 724916c8a8
("meson: dedup gallium-xvmc logic")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Currently if vdpau is set to auto, it will be disabled only in cases
where gallium is disabled or the host OS is not supported (mac, haiku,
windows). However on (for example) Linux if libvdpau is not installed
then the build will error because of the unmet dependency. This corrects
auto to do the right thing, and not error if libvdpau is not installed.
Fixes: 992af0a4b8
("meson: dedup gallium-vdpau logic")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
From my point of view, when we aren't able to submit a CS
something terribly wrong happens and we are most likely
going to lost the device.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
the format of the CLEAR_COLOR register doesn't depend on the target format
this fixes clear color when rendering to 32-bit RGBA and 16-bit targets
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Rob Clark <robdclark@gmail.com>
this patch adds support for a20x, which has some differences with a220:
-no VGT_MAX_VTX_INDX register
-no CLEAR_COLOR register
-set RB_BC_CONTROL in restore (hangs without)
-different CP_DRAW_INDX format
tested with kmscube and glmark2 scenes, on par with a220
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The offset field is 22 bit large.
11 bits are necessary because MaxVertexAttribRelativeOffset = 2047
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Rob Clark <robdclark@gmail.com>
For a meson -Db_ndebug=true release build on x86_64, reduces text size of
libv3d.a from 53.0k to 51.6k. Inspired by 0d5329d626 ("anv: Disable
__gen_validate_value if NDEBUG is set.")
All of ARB_gpu_shader5 is most certainly not required for GLES 3.1
(most of it is in OES_gpu_shader5 on top of GLES 3.1).
Some of what is required from ARB_gpu_shader5 is provided by
ARB_texture_gather, so check for that. The remaining subset of
ARB_gpu_shader5 doesn't have individual extensions to check for,
but I guess it is unlikely that some driver has all of these
extensions but not, say, integer bitfield manipulation.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Acked-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Similar to the combined limit for VS+FS, there is an upper limit for
shader size to run from internel memory.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Previously when setting up a uniform it would try to walk the uniform
storage slots and find one that matches the name of the given
variable. However, each variable already has a location which is an
index into the UniformStorage array so we can just directly jump to
the right slot. Some of the variables take up more than one slot so we
still need to calculate how many it uses.
The main reason to do this is to support ARB_gl_spirv because in that
case the uniforms don’t have names so the previous approach won’t
work.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Right now, the BRW linker code assumes nir_variable::name is always
non-NULL, but thanks to ARB_gl_spirv we will soon be linking SPIR-V
programs, and those explicitly require matching uniforms by location.
The name is just a debug hint.
Instead of checking for the name this patch makes it check for
var->num_state_slots on the assumption that everything that had an
internal name also had some state slots. This seems likely because the
two code paths that are taken when the name begins with "gl_" already
have an assert that var->state_slots is not NULL.
v2: simplified, most of it moved to glsl/nir/spirv (Neil Roberts)
v3: check for num_state_slots instead of the name. This is needed
because we do actually have nameless builtins with SPIR-V such as
PatchVerticesIn and we want them to hit the
_mesa_add_state_reference code path (Neil Roberts)
Signed-off-by: Eduardo Lima <elima@igalia.com>
Signed-off-by: Neil Roberts <nroberts@igalia.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Otherwise if the shader is SPIR-V then SamplerUsed won’t have been
initialised yet so it will end up thinking no textures are used. This
was causing a crash later on if nothing causes it to regenerate
TexturesUsed before the next render.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This function is equivalent to the linker.cpp
build_program_resource_list() but will extract the resources from NIR
shaders instead.
For now, only uniforms and program inputs are implemented.
v2: move from compiler/nir to compiler/glsl (Timothy Arceri)
v3: remove support for inputs, that is still WIP (spotted by Timothy
Arceri)
Signed-off-by: Eduardo Lima <elima@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
So it could be used by the GLSL and NIR linker.
v2: (Timothy Arceri)
* Moved from compiler to compiler/glsl
* Method renamed to link_util_add_program_resource
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This is based on link_uniform_initializers.cpp.
v2: move from compiler/nir to compiler/glsl (Timothy Arceri)
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This function will be the entry point for linking the uniforms from
the nir_shader objects associated with the gl_linked_shaders of a
program.
This patch includes initial support for linking uniforms from NIR
shaders. It is tailored for the ARB_gl_spirv needs, and it is far from
complete, but it should handle most cases of uniforms, array
uniforms, structs, samplers and images.
There are some FIXMEs related to specific features that will be
implemented in following patches, like atomic counters, UBOs and
SSBOs.
Also, note that ARB_gl_spirv makes mandatory explicit location for
normal uniforms, so this code only handles uniforms with explicit
location. But there are cases, like uniform atomic counters, that
doesn't have a location from the OpenGL point of view (they have a
binding), but that Mesa assign internally a location. That will be
handled on following patches.
A nir_linker.h file is also added. More NIR-linking related API will
be added in subsequent patches and those will include stuff from Mesa,
so reusing nir.h didn't seem a good idea.
v2: move from compiler/nir to compiler/glsl (Timothy Arceri)
v3: sets var->driver.location if the uniform was found from a previous
stage (Neil Roberts).
Signed-off-by: Eduardo Lima <elima@igalia.com>
Signed-off-by: Neil Roberts <nroberts@igalia.com
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Linker utilities common to the GLSL IR and NIR linker (the latter to
be used for ARB_gl_spirv).
We need to move it to a new header as the NIR linker doesn't need to
know about ir_variable, and others, included at linker.h.
v2: move from src/compiler to src/compiler/glsl (Timothy Arceri)
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
When SpvDecorationBinding is encountered in the SPIR-V source it now
sets explicit_binding on the nir_variable. This will be used to
determine whether to initialise sampler and image uniforms with the
binding value.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
vtn_variable_mode_image and _sampler are instead replaced with
vtn_variable_mode_uniform which encompasses both of them. In the few
places where it was neccessary to distinguish between the two, the
GLSL type of the pointer is used instead.
The main reason to do this is that on OpenGL it is permitted to put
images and samplers into structs and declare a uniform with them. That
means that variables can now have a mix of uniform, sampler and image
modes so picking a single one of those modes for a variable no longer
makes sense.
This fixes OpLoad on a sampler within a struct which was previously
using the variable mode to determine whether it was a sampler or not.
The type of the variable is a struct so it was not being considered to
be uniform mode even though the member being loaded should be sampler
mode.
The previous code appeared to be using var->interface_type as a place
to store the type of the variable without the enclosing array for
images and samplers. I guess this worked because opaque types can not
appear in interfaces so the interface_type is sort of unused. This
patch removes the overloading of var->interface_type and any places
that needed the type without the array can now just deduce it from
var->type.
v2: squash in this patch the changes to anv/nir (Timothy)
Signed-off-by: Eduardo Lima <elima@igalia.com>
Signed-off-by: Neil Roberts <nroberts@igalia.com
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
They are supported by SPIR-V for ARB_gl_spirv.
v2 (changes on top of Nicolai's original patch):
* Handle UniformConstant storage class for uniforms other than
samplers and images. (Eduardo Lima)
* Handle location decoration also for samplers and images. (Eduardo
Lima)
* Rebase update (spirv_to_nir options added, logging changes, and
others) (Alejandro Piñeiro)
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Eduardo Lima <elima@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Vulkan has the concept of separate image and sampler objects in the
SPIR-V code whereas GL conflates them into one. nir_lower_samplers
contains an assert to verify that sampler operand is not being set on
the nir instruction. However when the code comes from spirv_to_nir the
sampler operand is always set. GL_arb_gl_spirv explicitly states that
OpTypeSampler is not supported so it retains the GL behaviour of not
being able to seperate them. Therefore the sampler will always be the
same as the texture. This GL version of the lowering code ignores
instr->sampler and sets instr->sampler_index to the same value as
instr->texture_index. Some other places in the code (such as in
nir_print) assume that once the instruction is lowered then both
instr->texture and instr->sampler will be NULL, so to keep this
behaviour we now set instr->sampler to NULL after ignoring it to fill
in instr->sampler_index.
Signed-off-by: Eduardo Lima <elima@igalia.com>
Signed-off-by: Neil Roberts <nroberts@igalia.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This is copied from the corresponding value in ir_variable. The
intention is to eventually use it in a pure-NIR linker.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Since ARB_gl_spirv name reflection can be missing. piglit
shader_runner does several resource checking, so this commit is useful
to get even the more simple piglit tests running without crashing on
SPIR-V mode.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This will be used by the linker code to differentiate between programs
made out of SPIR-V or GLSL shaders.
This was rejected in the past, assuming that it was equivalent to
check for "shProg->_LinkedShaders[stage]->spirv_data != NULL". But:
* At some points of the linking process it would be needed to check
if _LinkerShaders[stage] is present, so the full check would be:
"shProg->_LinkedShaders[stage] != NULL &&
shProg->_LinkedShaders[stage]->spirv_data != NULL"
* Sometimes you would like to do some specific to SPIR-V
independently of the stage, or for any stage. For example, "link
all the uniforms, for all stages". In that case checking for the
flag would be equivalent to iterate all the _LinkedShaders and
check if there is any spirv_data available.
The former makes readibility really worse. Both could be solved by
adding two helpers. But adding a flag seems really more simple and
readable.
v2: added justification for the flag on the commit message (Alejandro)
Signed-off-by: Eduardo Lima <elima@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
With the recent rework of converting the shell script to a python one
the check for actual tests was dropped.
Bring that back, since it was explicitly added considering we had a ~2
year period, during which the tests were not run.
v2: use raise Exception() over print() & return false (Dylan)
Fixes: db8cd8e367 ("glcpp/tests: Convert shell scripts to a python
script")
Cc: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Bring back the "detection" of the said variables, to allow
standalone execution.
Fixes: db8cd8e367 ("glcpp/tests: Convert shell scripts to a python
script")
Cc: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
As of recently both of these have been reworked so they invoke a python
script. At the same time the latter can be executed with the combined
arguments of both scripts.
AKA we no longer need to have them separate.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Virtually every driver that supports ATI_separate_stencil
also supports EXT_stencil_two_side.
Use the latter boolean for both extension. With that in mind we can drop
the explicit true from the drivers and the nasty comment in
compute_version().
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This allows to avoid having to see garbage in Dying Light loading screen
at least, which probably expects Windows/NV behavior of all allocations
being zeroed by default.
Analogous to radv flag with the same name.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Avoids a branch and reduces code size a tiny bit:
text data bss dec hex filename
10804563 398653 2070368 13273584 ca89f0 /tmp/radeonsi_dri.so.old
10804499 398653 2070368 13273520 ca89b0 /tmp/radeonsi_dri.so
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Ported from RadeonSI.
Not sure why this is needed but AMDVLK does something similar.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The sampleMaskIn workaround (b936f4d1ca)
tries to figure out if the shader is running at per-sample frequency, but
there's a typo bug so it will only recognize per-sample linar inputs,
not per-sample perspective ones.
Spotted by Eric Engestrom <eric.engestrom@intel.com>
Fixes: b936f4d1ca0d2ab1e828a "r600: partly fix sampleMaskIn value"
When VK_USE_PLATFORM_XLIB_XRANDR_EXT is defined, vulkan.h includes
X11/extensions/Xrandr.h for the RROutput typedef which is used in
the vkGetRandROutputDisplayEXT interface.
Make sure we have the required header by checking during the build,
and also set CFLAGS to point at the right directory.
We don't need to link against the library as we don't use any
functions from there, so don't add the _LIBS value in the autotools
build.
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes: dbac8e25f8 "radv: Add EXT_acquire_xlib_display to radv driver [v2]"
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
There's a convenient "FTOC" instruction for generating the coverage now,
unlike vc4. This fixes
dEQP-GLES3.functional.multisample.fbo_4_samples.proportionality_alpha_to_coverage
Otherwise, a blit from separate stencil may fail to flush the job that
initialized it, or new drawing could fail to flush a blit reading from
stencil.
Fixes:
dEQP-GLES3.functional.fbo.blit.depth_stencil.depth32f_stencil8_basic
dEQP-GLES3.functional.fbo.blit.depth_stencil.depth32f_stencil8_scale
dEQP-GLES3.functional.fbo.blit.depth_stencil.depth32f_stencil8_stencil_only
dEQP-GLES3.functional.fbo.msaa.2_samples.depth32f_stencil8
dEQP-GLES3.functional.fbo.msaa.4_samples.depth32f_stencil8
We needed to convert from a -errno to a boolean success value. Fixes:
GTF-GLES3.gtf.GL3Tests.sync.sync_functionality_clientwaitsync_flush
GTF-GLES3.gtf.GL3Tests.sync.sync_functionality_clientwaitsync_signaled
As not every (upcoming) backend compiler is happy with
nir_lower_xxx_to_scalar lowerings do them only if the backend
is scalar (and not vec4) based.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
v1 -> v2:
- nv30 is _NOT_ scalar as suggested by Ilia Mirkin.
- Change from a screen cap to a shader cap as suggested
by Eric Anholt.
- radeonsi is scalar as suggested by Marek Olšák.
- Change missing ones to be scalar.
v2 -> v3:
- r600 prefers vec4 as suggested by Marek Olšák.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This extension is required to support EXT_display_control as it offers
a way to query whether the vblank counter is supported.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This extension is required to support EXT_display_control as it offers
a way to query whether the vblank counter is supported.
v2:
Add extension to list in alphabetical order
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This extension is required to support EXT_display_control as it offers a
way to query whether the vblank counter is supported. Internally, it is
implemented using a fake MESA extension which provides a chain-in to
GetSurfaceCapabilities2KHR which contains the one added field. This has
the advantage of reducing number of callbacks needed in the back-ends.
It also means that anything chained into GetSurfaceCapabilities2EXT
through VkSurfaceCapabilities2KHR::pNext so we only need to handle
crawling the pNext chain once per back-end.
Reviewed-by: Keith Packard <keithp@keithp.com>
Change the type of util_cpu_caps::nr_cpus to int because sysconfig
returns a signed value, fixes:
u_cpu_detect.c: In function 'util_cpu_detect':
u_cpu_detect.c:317:30: warning: comparison between signed and unsigned
integer expressions [-Wsign-compare]
if (util_cpu_caps.nr_cpus == -1)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Only decorate function as noreturn when DEBUG is not defined, because
when compiled in DEBUG mode the function actually executes an int3 and
may return, fixes:
u_debug.c: In function '_debug_assert_fail':
u_debug.c:309:1: warning: 'noreturn' function does return
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
remove "type" from "match_or_expand_immediate64", fixes:
tgsi/tgsi_ureg.c: In function 'match_or_expand_immediate64':
tgsi/tgsi_ureg.c:837:34: warning: unused parameter 'type' [-Wunused-
parameter]
int type,
^~~~
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Integer propagation rules can sometimes be irritating. With
"unsigned x" "x + 1" gets propagated to a signed integer, so explicitely
assign the sum to an unsigned and use that for comaprison.
In file included from tgsi/tgsi_two_side.c:41:0:
tgsi/tgsi_two_side.c: In function 'xform_decl':
./util/u_math.h:660:29: warning: comparison between signed and unsigned
integer expressions [-Wsign-compare]
#define MAX2( A, B ) ( (A)>(B) ? (A) : (B) )
^
tgsi/tgsi_two_side.c:86:24: note: in expansion of macro 'MAX2'
ts->num_inputs = MAX2(ts->num_inputs, decl->Range.Last + 1);
^~~~
./util/u_math.h:660:40: warning: signed and unsigned type in conditional
expression [-Wsign-compare]
#define MAX2( A, B ) ( (A)>(B) ? (A) : (B) )
^
tgsi/tgsi_two_side.c:86:24: note: in expansion of macro 'MAX2'
ts->num_inputs = MAX2(ts->num_inputs, decl->Range.Last + 1);
^~~~
./util/u_math.h:660:29: warning: comparison between signed and unsigned
integer expressions [-Wsign-compare]
#define MAX2( A, B ) ( (A)>(B) ? (A) : (B) )
^
tgsi/tgsi_two_side.c:89:23: note: in expansion of macro 'MAX2'
ts->num_temps = MAX2(ts->num_temps, decl->Range.Last + 1);
^~~~
./util/u_math.h:660:40: warning: signed and unsigned type in conditional
expression [-Wsign-compare]
#define MAX2( A, B ) ( (A)>(B) ? (A) : (B) )
^
tgsi/tgsi_two_side.c:89:23: note: in expansion of macro 'MAX2'
ts->num_temps = MAX2(ts->num_temps, decl->Range.Last + 1);
^~~~
tgsi/tgsi_two_side.c: In function 'xform_inst':
tgsi/tgsi_two_side.c:184:45: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
if (inst->Src[i].Register.Index == ts-
>front_color_input[j]) {
^~
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
tgsi/tgsi_ureg.c: In function 'ureg_DECL_sampler':
tgsi/tgsi_ureg.c:721:34: warning: comparison between signed and unsigned
integer expressions [-Wsign-compare]
if (ureg->sampler[i].Index == nr)
^~
tgsi/tgsi_ureg.c: In function 'match_or_expand_immediate64':
tgsi/tgsi_ureg.c:837:34: warning: unused parameter 'type' [-Wunused-
parameter]
int type,
^~~~
tgsi/tgsi_ureg.c: In function 'emit_decls':
tgsi/tgsi_ureg.c:1821:31: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
if (ureg->properties[i] != ~0)
^~
tgsi/tgsi_ureg.c: In function 'ureg_create_with_screen':
tgsi/tgsi_ureg.c:2193:18: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
for (i = 0; i < ARRAY_SIZE(ureg->properties); i++)
^
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
tgsi/tgsi_text.c: In function 'parse_identifier':
tgsi/tgsi_text.c:218:16: warning: comparison between signed and unsigned
integer expressions [-Wsign-compare]
if (i == len - 1)
^~
tgsi/tgsi_text.c: In function 'parse_optional_swizzle':
tgsi/tgsi_text.c:873:21: warning: comparison between signed and unsigned
integer expressions [-Wsign-compare]
for (i = 0; i < components; i++) {
^
tgsi/tgsi_text.c: In function 'parse_instruction':
tgsi/tgsi_text.c:1103:18: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
for (i = 0; i < info->num_dst + info->num_src + info->is_tex; i++) {
^
tgsi/tgsi_text.c:1118:18: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
else if (i < info->num_dst + info->num_src) {
^
tgsi/tgsi_text.c: In function 'parse_immediate':
tgsi/tgsi_text.c:1660:24: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
for (type = 0; type < ARRAY_SIZE(tgsi_immediate_type_names); ++type)
{
^
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
tgsi/tgsi_lowering.c: In function 'emit_twoside':
tgsi/tgsi_lowering.c:1179:18: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
for (i = 0; i < ctx->two_side_colors; i++) {
^
tgsi/tgsi_lowering.c:1208:18: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
for (i = 0; i < ctx->two_side_colors; i++) {
^
tgsi/tgsi_lowering.c:1216:18: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
for (i = 0; i < ctx->two_side_colors; i++) {
^
tgsi/tgsi_lowering.c: In function 'emit_decls':
tgsi/tgsi_lowering.c:1280:18: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
for (i = 0; i < ctx->numtmp; i++) {
^
tgsi/tgsi_lowering.c: In function 'rename_color_inputs':
tgsi/tgsi_lowering.c:1311:28: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
if (src->Index == ctx->two_side_idx[j]) {
^~
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
tgsi/tgsi_lowering.c: In function 'emit_twoside':
tgsi/tgsi_lowering.c:1179:18: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
for (i = 0; i < ctx->two_side_colors; i++) {
^
tgsi/tgsi_lowering.c:1208:18: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
for (i = 0; i < ctx->two_side_colors; i++) {
^
tgsi/tgsi_lowering.c:1216:18: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
for (i = 0; i < ctx->two_side_colors; i++) {
^
tgsi/tgsi_lowering.c: In function 'emit_decls':
tgsi/tgsi_lowering.c:1280:18: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
for (i = 0; i < ctx->numtmp; i++) {
^
tgsi/tgsi_lowering.c: In function 'rename_color_inputs':
tgsi/tgsi_lowering.c:1311:28: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
if (src->Index == ctx->two_side_idx[j]) {
^~
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
tgsi/tgsi_build.c: In function 'tgsi_build_full_immediate':
tgsi/tgsi_build.c:622:18: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
for( i = 0; i < full_imm->Immediate.NrTokens - 1; i++ ) {
^
tgsi/tgsi_build.c: In function 'tgsi_build_full_property':
tgsi/tgsi_build.c:1393:18: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
for( i = 0; i < full_prop->Property.NrTokens - 1; i++ ) {
^
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
tgsi/tgsi_exec.c: In function 'exec_tex':
tgsi/tgsi_exec.c:2254:46: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
assert(shadow_ref >= dim && shadow_ref < ARRAY_SIZE(args));
^
./util/u_debug.h:189:30: note: in definition of macro 'debug_assert'
#define debug_assert(expr) ((expr) ? (void)0 : _debug_assert_fail(#expr,
__FILE__, __LINE__, __FUNCTION__))
^~~~
tgsi/tgsi_exec.c:2254:7: note: in expansion of macro 'assert'
assert(shadow_ref >= dim && shadow_ref < ARRAY_SIZE(args));
^~~~~~
tgsi/tgsi_exec.c:2290:23: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
for (i = dim; i < ARRAY_SIZE(args); i++)
^
In file included from ./util/u_memory.h:39:0,
from tgsi/tgsi_exec.c:62:
tgsi/tgsi_exec.c: In function 'exec_lodq':
tgsi/tgsi_exec.c:2357:15: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
assert(dim <= ARRAY_SIZE(coords));
^
./util/u_debug.h:189:30: note: in definition of macro 'debug_assert'
#define debug_assert(expr) ((expr) ? (void)0 : _debug_assert_fail(#expr,
__FILE__, __LINE__, __FUNCTION__))
^~~~
tgsi/tgsi_exec.c:2357:4: note: in expansion of macro 'assert'
assert(dim <= ARRAY_SIZE(coords));
^~~~~~
tgsi/tgsi_exec.c:2363:20: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
for (i = dim; i < ARRAY_SIZE(coords); i++) {
^
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
tgsi/tgsi_aa_point.c:32:0:
tgsi/tgsi_aa_point.c: In Funktion »aa_decl«:
./util/u_math.h:660:29: Comparison between signed and unsigned in
conditional expressions [-Wsign-compare]
#define MAX2( A, B ) ( (A)>(B) ? (A) : (B) )
^
tgsi/tgsi_aa_point.c:76:21: Remark: when substituting of the macro
»MAX2«
ts->num_tmp = MAX2(ts->num_tmp, decl->Range.Last + 1);
^~~~
./util/u_math.h:660:40: Warning: signed and unsigned type in conditional
expression [-Wsign-compare]
#define MAX2( A, B ) ( (A)>(B) ? (A) : (B) )
^
tgsi/tgsi_aa_point.c:76:21: Remark: when substituting of the macro
»MAX2«
ts->num_tmp = MAX2(ts->num_tmp, decl->Range.Last + 1);
^~~~
tgsi/tgsi_aa_point.c: In Funktion »aa_inst«:
tgsi/tgsi_aa_point.c:220:31: Comparison between signed and unsigned in
conditional expressions [-Wsign-compare]
dst->Register.Index == ts->color_out) {
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
tgsi_sanity.c: In function 'iter_instruction':
tgsi_sanity.c:316:29: warning: comparison between signed and unsigned
integer expressions [-Wsign-compare]
if (ctx->index_of_END != ~0) {
^~
tgsi_sanity.c: In function 'epilog':
tgsi_sanity.c:488:26: warning: comparison between signed and unsigned
integer expressions [-Wsign-compare]
if (ctx->index_of_END == ~0) {
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
tgsi_parse.c: In function 'tgsi_parse_free':
tgsi_parse.c:54:31: warning: unused parameter 'ctx' [-Wunused-parameter]
struct tgsi_parse_context *ctx )
^~~
tgsi_parse.c: In function 'tgsi_parse_end_of_tokens':
tgsi_parse.c:62:25: warning: comparison between signed and unsigned
integer expressions [-Wsign-compare]
return ctx->Position >=
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
tgsi_dump.c: In function 'iter_property':
tgsi_dump.c:443:18: warning: comparison between signed and unsigned
integer expressions [-Wsign-compare]
for (i = 0; i < prop->Property.NrTokens - 1; ++i) {
^
tgsi_dump.c:459:13: warning: comparison between signed and unsigned
integer expressions [-Wsign-compare]
if (i < prop->Property.NrTokens - 2)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This warning is misleading: When a struct is partially initialized without
assigning to the structure members by name, then the remaining fields
will be zeroed out, and this warning will be issued (if enabled). If, on the
other hand, the partial initialization is done by assigning to named members,
the remaining structure elements may hold random data, but the warning is not
issued. Since in Mesa the first approach to initialize structure elements is
used very often, and it is usually assumed that the remaining elements are
zeroed out, heeding this warning would be counter-productive.
v2: - add -Wno-missing-field-initializers to meson-build
- fix empty line error
(both Eric Engestrom)
v3: * check for -Wmissing-field-initializers warning and then disable it
because gcc and clang always accept -Wno-* (Dylan Baker)
* Also disable this warning for C++
v4: * meson.build add -Wno-missing-field-initializers to
c_args instead of no_override_init_args (Eric Engstrom)
v5: * configure.ac: Correct copy/paste error with CFLAGS/CXXFLAGS
Reviewed-by: Marek Olšák <marek.olsak@amd.com> (v1)
Reviewed-by: Emil Velikov <emil.velikov@collabora.com> (v2)
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
AMDVLK also always uses CACHE_FLUSH_AND_INV_TS_EVENT. The other
workaround is to flush DB metadata after emitting the framebuffer,
but that seems slower.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
A case of making things worse while trying to fix something minor ...
Fixes: ef79457004 "radv: Merge the flush bits of CMASK & DCC clear."
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This extension adds the ability to borrow an X RandR output for
temporary use directly by a Vulkan application to the radv driver.
v2:
Simplify addition of VK_USE_PLATFORM_XLIB_XRANDR_KHR to
vulkan_wsi_args
Suggested-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This extension adds the ability to borrow an X RandR output for
temporary use directly by a Vulkan application to the anv driver.
v2:
Simplify addition of VK_USE_PLATFORM_XLIB_XRANDR_KHR to
vulkan_wsi_args
Suggested-by: Eric Engestrom <eric.engestrom@imgtec.com>
v3:
Add extension to list in alphabetical order
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This extension adds the ability to borrow an X RandR output for
temporary use directly by a Vulkan application. For DRM, we use the
Linux resource leasing mechanism.
v2:
Clean up xlib_lease detection
* Use separate temporary '_xlib_lease' variable to hold the
option value to avoid changin the type of a variable.
* Use boolean expressions instead of additional if statements
to compute resulting with_xlib_lease value.
* Simplify addition of VK_USE_PLATFORM_XLIB_XRANDR_KHR to
vulkan_wsi_args
Suggested-by: Eric Engestrom <eric.engestrom@imgtec.com>
Move mode list from wsi_display to wsi_display_connector
Fix scope for wsi_display_mode and wsi_display_connector allocs
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
v3:
Adopt Jason Ekstrand's coding conventions
Declare variables at first use, eliminate extra whitespace
between types and names. Wrap lines to 80 columns.
Explicitly forbid multiple DRM leases. Making the code support
this looks tricky and will require additional thought.
Use xcb_randr_output_t throughout the internals of the
implementation. Convert at the public API
(wsi_get_randr_output_display).
Clean up check for usable active_crtc (possible when only the
desired output is connected to the crtc).
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
v4:
Move output resource fetching closer to use in
wsi_display_get_output. This simplifies the error returns in
earlier parts of the code a bit.
Return VK_ERROR_INITIALIZATION_FAILED from
wsi_acquire_xlib_display. Jason says this is the right error
message.
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
v5:
randr doesn't pass vscan over the wire, so we set vscan to 0
for randr-acquired modes, and test wsi modes for vscan <= 1
when comparing against randr modes.
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Add support for the EXT_direct_mode_display extension. This just
provides the vkReleaseDisplayEXT function.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Add support for the EXT_direct_mode_display extension. This just
provides the vkReleaseDisplayEXT function.
v2: Add extension to list in alphabetical order
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Add support for the EXT_direct_mode_display extension. This just
provides the vkReleaseDisplayEXT function.
v2:
Adopt Jason Ekstrand's coding conventions
Declare variables at first use, eliminate extra whitespace
between types and names. Wrap lines to 80 columns.
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This adds support for the KHR_display extension to the radv Vulkan
driver. The driver now attempts to open the master DRM node when the
KHR_display extension is requested so that the common winsys code can
perform the necessary operations.
v2:
* Simplify addition of VK_USE_PLATFORM_DISPLAY_KHR to
vulkan_wsi_args
Suggested-by: Eric Engestrom <eric.engestrom@imgtec.com>
v3:
Adapt to new wsi_device_init API (added display_fd)
v4:
Adopt Jason Ekstrand's coding conventions
Declare variables at first use, eliminate extra whitespace
between types and names. Wrap lines to 80 columns.
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
v5:
Add vkCreateDisplayModeKHR. This doesn't actually create
new modes, it only looks to see if the requested parameters
matches an existing mode and returns that.
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This adds support for the KHR_display extension to the anv Vulkan
driver. The driver now attempts to open the master DRM node when the
KHR_display extension is requested so that the common winsys code can
perform the necessary operations.
v2: Make sure primary fd is usable
When KHR_display is selected, we try to open the primary node
instead of the render node in case the user wants to use
KHR_display for presentation. However, if we're actually going
to end up using RandR leases, then we don't care if the
resulting fd can't be used for display, but the kernel also
prevents us from using it for drawing when someone else has
master.
v3:
Simplify addition of VK_USE_PLATFORM_DISPLAY_KHR to vulkan_wsi_args
Suggested-by: Eric Engestrom <eric.engestrom@imgtec.com>
v4:
Adapt primary node usage to new wsi_device_init API
v5:
Adopt Jason Ekstrand's coding conventions
Declare variables at first use, eliminate extra whitespace between
types and names. Wrap lines to 80 columns.
Remove spurious MM_PER_PIXEL define
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
v6:
Open DRM master before initializing WSI layer.
The DRM master FD is passed to the WSI layer during
initialization, so we need to open the device slightly earlier
in the function.
Close DRM master in device_finish.
Use anv_gem_get_param to detect working master_fd instead of
directly using the ioctl.
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
v7:
Add vkCreateDisplayModeKHR. This doesn't actually create
new modes, it only looks to see if the requested parameters
matches an existing mode and returns that.
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This adds support for the KHR_display extension support to the vulkan
WSI layer. Driver support will be added separately.
v2:
* fix double ;; in wsi_common_display.c
* Move mode list from wsi_display to wsi_display_connector
* Fix scope for wsi_display_mode andwsi_display_connector
allocs
* Switch all allocations to vk_zalloc instead of vk_alloc.
* Fix DRM failure in
wsi_display_get_physical_device_display_properties
When DRM fails, or when we don't have a master fd
(presumably due to application errors), just return 0
properties from this function, which is at least a valid
response.
* Use vk_outarray for all property queries
This is a bit less error-prone than open-coding the same
stuff.
* Remove VK_COMPOSITE_ALPHA_INHERIT_BIT_KHR from surface caps
Until we have multi-plane support, we shouldn't pretend to
have any multi-plane semantics, even if undefined.
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
* Simplify addition of VK_USE_PLATFORM_DISPLAY_KHR to
vulkan_wsi_args
Suggested-by: Eric Engestrom <eric.engestrom@imgtec.com>
v3:
Add separate 'display_fd' and 'render_fd' arguments to
wsi_device_init API. This allows drivers to use different FDs
for the different aspects of the device.
Use largest mode as display size when no preferred mode.
If the display doesn't provide a preferred mode, we'll assume
that the largest supported mode is the "physical size" of the
device and report that.
v4:
Make wsi_image_state enumeration values uppercase.
Follow more common mesa conventions.
Remove 'render_fd' from wsi_device_init API. The
wsi_common_display code doesn't use this fd at all, so stop
passing it in. This avoids any potential confusion over which
fd to use when creating display-relative object handles.
Remove call to wsi_create_prime_image which would never have
been reached as the necessary condition (use_prime_blit) is
never set.
whitespace cleanups in wsi_common_display.c
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Add depth/bpp info to available surface formats. Instead of
hard-coding depth 24 bpp 32 in the drmModeAddFB call, use the
requested format to find suitable values.
Destroy kernel buffers and FBs when swapchain is destroyed. We
were leaking both of these kernel objects across swapchain
destruction.
Note that wsi_display_wait_for_event waits for anything to
happen. wsi_display_wait_for_event is simply a yield so that
the caller can then check to see if the desired state change
has occurred.
Record swapchain failures in chain for later return. If some
asynchronous swapchain activity fails, we need to tell the
application eventually. Record the failure in the swapchain
and report it at the next acquire_next_image or queue_present
call.
Fix error returns from wsi_display_setup_connector. If a
malloc failed, then the result should be
VK_ERROR_OUT_OF_HOST_MEMORY. Otherwise, the associated ioctl
failed and we're either VT switched away, or our lease has
been revoked, in which case we should return
VK_ERROR_OUT_OF_DATE_KHR.
Make sure both sides of if/else brace use matches
Note that we assume drmModeSetCrtc is synchronous. Add a
comment explaining why we can idle any previous displayed
image as soon as the mode set returns.
Note that EACCES from drmModePageFlip means VT inactive. When
vt switched away drmModePageFlip returns EACCES. Poll once a
second waiting until we get some other return value back.
Clean up after alloc failure in
wsi_display_surface_create_swapchain. Destroy any created
images, free the swapchain.
Remove physical_device from wsi_display_init_wsi. We never
need this value, so remove it from the API and from the
internal wsi_display structure.
Use drmModeAddFB2 in wsi_display_image_init. This takes a drm
format instead of depth/bpp, which provides more control over
the format of the data.
v5:
Set the 'currentStackIndex' member of the
VkDisplayPlanePropertiesKHR record to zero, instead of
indexing across all displays. This value is the stack depth of
the plane within an individual display, and as the current
code supports only a single plane per display, should be set
to zero for all elements
Discovered-by: David Mao <David.Mao@amd.com>
v6:
Remove 'platform_display' bits from the build and use the
existing 'platform_drm' instead.
v7:
Ensure VK_ICD_WSI_PLATFORM_MAX is large enough by
setting to VK_ICD_WSI_PLATFORM_DISPLAY + 1
v8:
Simplify wsi_device_init failure from wsi_display_init_wsi
by using the same pattern as the other wsi layers.
Adopt Jason Ekstrand's white space and variable declaration
suggestions. Declare variables at first use, eliminate extra
whitespace between types and names, add list iterator helpers,
switch to lower-case list_ macros.
Respond to Jason's April 8 review:
* Create a function to convert relative to absolute timeouts
to catch overflow issues in one place
* use VK_NULL_HANDLE to clear prop->currentDisplay
* Get rid of available_present_modes array.
* return OUT_OF_DATE_KHR when display_queue_next called after
display has been released.
* Make errors from mode setting fatal in display_queue_next
* Remove duplicate pthread_mutex_init call
* Add wsi_init_pthread_cond_monotonic helper function to
isolate pthread error handling from wsi_display_init_wsi
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
v9:
Fix vscan handling by using MAX2(vscan, 1) everywhere. Vscan
can be zero anywhere, which is treated the same as 1.
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
v10:
Respond to Vulkan CTS failures.
1. Initialize planeReorderPossible in display_properties code
2. Only report connected displays in
get_display_plane_supported_displays
3. Return VK_ERROR_OUT_OF_HOST_MEMORY when pthread cond
initialization fails.
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
4. Add vkCreateDisplayModeKHR. This doesn't actually create
new modes, it only looks to see if the requested parameters
matches an existing mode and returns that.
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Probably won't be much different in practice, but still wrong.
Fixes Coverity issue 1435002.
Not CC'ing to stable since this is only hit if you enable MSAA
DCC via RADV_DEBUG.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
The scratch registers move again in a6xx.. so for post-a4xx let's just
move this into the backend, and move the one place it used to be needed
in core into fd5_emit_ib(). For a6xx we will do similar, calling
emit_marker6() from fd6_emit_ib().
Signed-off-by: Rob Clark <robdclark@gmail.com>
This is kind of a hack, but really the only problem is the
debug_assert() in OUT_RELOC(). But the debug_assert() is
useful to catch real issues. So just add some #ifdef DEBUG
code to filter things out before we hit the assert.
Signed-off-by: Rob Clark <robdclark@gmail.com>
These never got updated in fd_context_all_dirty() so actually trying to
rely on them (in the case of fd5_emit_images()) ends up in some cases
where state is not emitted but should be. Best to just rip this out.
Signed-off-by: Rob Clark <robdclark@gmail.com>
I think this ends up just setting uniform/const memory. But we upload
x/y/z stride differently. At best this is unneeded, at worst it could
possibly clobber other uniform/const memory.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Unlike textures, this doesn't get lowered for us. (Would be nice
if they were.. at least until we are ready to deal w/ indirect
indexing..)
Signed-off-by: Rob Clark <robdclark@gmail.com>
Run this pass late (after opt loop) to move load_const instructions back
into the basic blocks which use the result, in cases where a load_const
is only consumed in a single block.
This helps reduce register usage in cases where the backend driver
cannot lower the load_const to a uniform.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
We can have arrays of images or samplers. But I forgot to handle that
case long ago. Suprised no one complained yet.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Save the next person from digging through the code to figure out what
the indirect_mask parameter actually does.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
AMDVLK uses 64 (distributed) and 16 (non-distributed).
radeonsi will use 63 and 16.
* This might improve tessellation performance on Hawaii, Bonaire, Tahiti,
Pitcairn. (they will use 16)
* I'm not sure if this matters for 1 SE configs.
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
This is the case for the simulator environment, and broke many blitter
tests by trying to texture from linear while the HW can only actually do
UIF/UBLINEAR/LT. Just make a temporary and copy into it with the CPU,
then blit from that.
This is the kind of path that should use the TFU, but I haven't exposed
that hardware yet.
Fixes dEQP-GLES3.functional.fbo.blit.default_framebuffer.*
Some fprintfs were probably left unintentionally a few years ago and are
a bit of a nuisance.
Fixes: 2d3301e4d5 ("virgl: fix reference counting of prime handles")
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
The prog->Shaders[i]->IsES check was accidentally removed causing
ES linking rules to be applied to desktop GLSL.
Fixes: 725b1a406d ("mesa/util: add allow_glsl_relaxed_es driconfig override")
This relaxes a number of ES shader restrictions allowing shaders
to follow more desktop GLSL like rules.
This initial implementation relaxes the following:
- allows linking ES shaders with desktop shaders
- allows mismatching precision qualifiers
- always enables standard derivative builtins
These relaxations allow Google Earth VR shaders to compile.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Google Earth VR shaders uses builtins in constant expressions with
GLSL 1.10. That feature wasn't allowed until GLSL 1.20.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Glibc has the same code to get program_invocation_short_name. However
for some reason the short name gets mangled for some wine apps.
For example with Google Earth VR I get:
program_invocation_name:
"/home/tarceri/.local/share/Steam/steamapps/common/EarthVR/Earth.exe"
program_invocation_short_name:
"e"
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
This should fix TF across a glFlush() or TF pause/restart. Fixes
dEQP-GLES3.functional.transform_feedback.array.interleaved.lines.highp_float
and many, many others.
If we are on gen8+ and have context isolation support, just make that
constant buffer address be absolute, so we can use it for push UBOs too.
v2: Do not duplicate constant_buffer_0_is_relative flag (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Drops the number of time we set the scissor by 4x for F1 2017,
which results in a consistent performance improvement of about 4%.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Shouldn't make any functional difference, just that `liblibanv_gen90.a`
will now be called `libanv_gen90.a`.
Fixes: 3218056e0e "meson: Build i965 and dri stack"
Fixes: d1992255bb "meson: Add build Intel "anv" vulkan driver"
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
As the previous use of shuffle_32bit_load_result_to_64bit_data
had a source/destination overlap for 64-bit. Now a temporary destination
is used for 64-bit cases to use shuffle_from_32bit_read that doesn't
handle src/dst overlaps.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Previously, the shuffle function had a source/destination overlap that
needs to be avoided to use shuffle_from_32bit_read. As we can use for
the shuffle destination the destination of removed MOVs.
This change also avoids the internal MOVs done by the previous shuffle
to deal with possible overlaps.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
shuffle_from_32bit_read manages 32-bit reads to 32-bit destination
in the same way that the previous loop so now we just call the new
function for all bitsizes, simplifying also the 64-bit load_input.
v2: Add comment about future 16-bit support (Jason Ekstrand)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This implementation avoids two unneeded MOVs for each 64-bit
component. One was done in the old shuffle, to avoid cases of
src/dst overlap but this is not the case. And the removed MOV
was already being being done in the shuffle.
Copy propagation wasn't able to remove them because shuffle
destination values are defined with partial writes because they
have stride == 2.
v2: Reword commit log summary (Jason Ekstrand)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
do_untyped_vector_read is used at load_ssbo and load_shared.
The previous MOVs are removed because shuffle_from_32bit_read
can handle storing the shuffle results in the expected destination
just using the proper offset.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Using shuffle_from_32bit_read instead of 16-bit shuffle functions
avoids the need of retype. At the same time new function are
ready for 8-bit type SSBO reads.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
shuffle_from_32bit_read can manage the shuffle/unshuffle needed
for different 8/16/32/64 bit-sizes at VARYING PULL CONSTANT LOAD.
To get the specific component the first_component parameter is used.
In the case of the previous 16-bit shuffle, the shuffle operation was
generating not needed MOVs where its results where never used. This
behaviour passed unnoticed on SIMD16 because dead_code_eliminate
pass removed the generated instructions but for SIMD8 they cound't be
removed because of being partial writes.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
These new shuffle functions deal with the shuffle/unshuffle operations
needed for read/write operations using 32-bit components when the
read/written components have a different bit-size (8, 16, 64-bits).
Shuffle from 32-bit to 32-bit becomes a simple MOV.
shuffle_src_to_dst takes care of doing a shuffle when source type is
smaller than destination type and an unshuffle when source type is
bigger than destination. So this new read/write functions just need
to call shuffle_src_to_dst assuming that writes use a 32-bit
destination and reads use a 32-bit source.
As shuffle_for_32bit_write/from_32bit_read components take components
in unit of source/destination types and shuffle_src_to_dst takes units
of the smallest type component, we adjust components and first_component
parameters.
To enable this new functions it is needed than there is no
source/destination overlap in the case of shuffle_from_32bit_read.
That never happens on shuffle_for_32bit_write as it allocates a new
destination register as it was at shuffle_64bit_data_for_32bit_write.
v2: Reword commit log and add comments to explain why first_component
and components parameters are adjusted. (Jason Ekstrand)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This new function takes care of shuffle/unshuffle components of a
particular bit-size in components with a different bit-size.
If source type size is smaller than destination type size the operation
needed is a component shuffle. The opposite case would be an unshuffle.
Component units are measured in terms of the smaller type between
source and destination. As we are un/shuffling the smaller components
from/into a bigger one.
The operation allows to skip first_component number of components from
the source.
Shuffle MOVs are retyped using integer types avoiding problems with
denorms and float types if source and destination bitsize is different.
This allows to simplify uses of shuffle functions that are dealing with
these retypes individually.
Now there is a new restriction so source and destination can not overlap
anymore when calling this shuffle function. Following patches that migrate
to use this new function will take care individually of avoiding source
and destination overlaps.
v2: (Jason Ekstrand)
- Rewrite overlap asserts.
- Manage type_sz(src.type) == type_sz(dst.type) case using MOVs
from source to dest. This works for 64-bit to 64-bits
operation that on Gen7 as it doesn't support Q registers.
- Explain that components units are based in the smallest type.
v3: - Fix unshuffle overlap assert (Jason Ekstrand)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
nir_ssa_def::parent_instr and nir_src::parent_instr have the same name,
but they mean really different things. I choose to save the next person
the hour+ that I just spent figuring that out. Even now that I know, I
doubt I'd notice in code review that someone typed foo->parent_instr
when they actually meant foo->ssa->parent_instr.
v2: Minor wording tweak in nir_ssa_def::parent_instr. Suggested by
Jason.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
All of the affected shaders are geometry shaders... the same ones from
the similar fs changes.
The "No changes on any other platforms" comment below is not quite
right. Without the previous change to register coalescing, this
optimization caused quite a few regressions in tests that either used
gl_ClipVertex or used different interpolation modes. I observed that
with both patches applied,
glsl-1.10/execution/interpolation/interpolation-none-gl_BackSecondaryColor-smooth-vertex.shader_test
was one instruction shorter. I suspect other shaders would be similarly
affected. Since this is all based on NOS, shader-db does not reflect
it.
Haswell
total instructions in shared programs: 12954955 -> 12954918 (<.01%)
instructions in affected programs: 3603 -> 3566 (-1.03%)
helped: 37
HURT: 0
helped stats (abs) min: 1 max: 1 x̄: 1.00 x̃: 1
helped stats (rel) min: 0.21% max: 2.50% x̄: 1.99% x̃: 2.50%
95% mean confidence interval for instructions value: -1.00 -1.00
95% mean confidence interval for instructions %-change: -2.30% -1.69%
Instructions are helped.
total cycles in shared programs: 410012108 -> 410012098 (<.01%)
cycles in affected programs: 3540 -> 3530 (-0.28%)
helped: 5
HURT: 0
helped stats (abs) min: 2 max: 2 x̄: 2.00 x̃: 2
helped stats (rel) min: 0.28% max: 0.28% x̄: 0.28% x̃: 0.28%
95% mean confidence interval for cycles value: -2.00 -2.00
95% mean confidence interval for cycles %-change: -0.28% -0.28%
Cycles are helped.
Ivy Bridge
total instructions in shared programs: 11679387 -> 11679351 (<.01%)
instructions in affected programs: 3292 -> 3256 (-1.09%)
helped: 36
HURT: 0
helped stats (abs) min: 1 max: 1 x̄: 1.00 x̃: 1
helped stats (rel) min: 0.21% max: 2.50% x̄: 2.04% x̃: 2.50%
95% mean confidence interval for instructions value: -1.00 -1.00
95% mean confidence interval for instructions %-change: -2.34% -1.74%
Instructions are helped.
No changes on any other platforms.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
This prevents regressions in a bunch of clipping and interpolation tests
caused by the next patch (i965/vec4: Optimize OR with 0 into a MOV).
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
fs_visitor::set_gs_stream_control_data_bits generates some code like
"control_data_bits | stream_id << ((2 * (vertex_count - 1)) % 32)" as
part of EmitVertex. The first time this (dynamically) occurs in the
shader, control_data_bits is zero. Many times we can determine this
statically and various optimizations will collaborate to make one of the
OR operands literal zero.
Converting the OR to a MOV usually allows it to be copy-propagated away.
However, this does not happen in at least some shaders (in the assembly
output of shaders/closed/UnrealEngine4/EffectsCaveDemo/301.shader_test,
search for shl).
All of the affected shaders are geometry shaders.
Broadwell and Skylake had similar results. (Skylake shown)
total instructions in shared programs: 14375452 -> 14375413 (<.01%)
instructions in affected programs: 6422 -> 6383 (-0.61%)
helped: 39
HURT: 0
helped stats (abs) min: 1 max: 1 x̄: 1.00 x̃: 1
helped stats (rel) min: 0.14% max: 2.56% x̄: 1.91% x̃: 2.56%
95% mean confidence interval for instructions value: -1.00 -1.00
95% mean confidence interval for instructions %-change: -2.26% -1.57%
Instructions are helped.
total cycles in shared programs: 531981179 -> 531980555 (<.01%)
cycles in affected programs: 27493 -> 26869 (-2.27%)
helped: 39
HURT: 0
helped stats (abs) min: 16 max: 16 x̄: 16.00 x̃: 16
helped stats (rel) min: 0.60% max: 7.92% x̄: 5.94% x̃: 7.92%
95% mean confidence interval for cycles value: -16.00 -16.00
95% mean confidence interval for cycles %-change: -6.98% -4.90%
Cycles are helped.
No changes on earlier platforms.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
The min/maxes ended up producing a negative clip width/height for
dEQP-GLES3.functional.fragment_ops.scissor.outside_render_line. Just make
sure they stay at 0 (or v3d 3.x's workaround) if that happens.
Fixes simulator assertion failures in
dEQP-GLES3.functional.shaders.texture_functions.texture.samplercubeshadow_bias_fragment
and similar complicated cases.
The docs called this field "uses both center W and centroid W", but
actually it's "do you need center W even if varyings don't obviously call
for it?"
Fixes dEQP-GLES3.functional.shaders.builtin_variable.fragcoord_w
getopt_long flag parameter is an int pointer, so if we use bool to store
those values, when getopt_long writes to one of them, it might end up
overwriting the next one.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
We don't enable CMASK for linear surfaces and addrlib only
enables DCC for tiling surfaces.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
I don't think that matter much to emit both values and that
makes the code a bit simpler.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
It's unnecessary to update the fast depth/stencil clear values
if the fast cleared depth/stencil image isn't currently bound.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
It's unnecessary to update the fast color clear values if the
fast cleared color image isn't currently bound.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
BITSET_FFS(x) macro makes use of ARRAY_SIZE(x) macro which is
defined in util/macro.h. Include it directy to make usage more
straightforward.
Fixes: 692bd4a1ab ("util: replace Elements() with ARRAY_SIZE()")
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
I noticed that the generated pkg-config files will include
glx and x11 dependencies even when x11 isn't a selected platform.
This fixes the private libs and was tested by building kmscube
V2:
- check if gallium-xlib is being used for glx
Fixes: 108d257a16 "meson: build libEGL"
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
We need to have the RCL start with EZ enabled, since those undecided draws
had EZ enabled. But we do need to update from UNDECIDED to LT or GT as
necessary still.
Fixes many simulator assertion fails in deqp
fragment_ops/interaction/basic_shader/*
The UBO push analysis pass incorrectly assumed that all values would fit
within a 32B chunk, and only recorded a bit for the 32B chunk containing
the starting offset.
For example, if a UBO contained the following, tightly packed:
vec4 a; // [0, 16)
float b; // [16, 20)
vec4 c; // [20, 36)
then, c would start at offset 20 / 32 = 0 and end at 36 / 32 = 1,
which means that we ought to record two 32B chunks in the bitfield.
Similarly, dvec4s would suffer from the same problem.
v2: Rewrite the accounting, my calculations were wrong.
v3: Write a comment about partial values (requested by Jason).
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com> [v1]
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> [v3]
Since SSBOs can be written by a different GPU thread, copy propagating a
read can cause the value to magically change. SSBO reads are also very
expensive, so doing it twice will be slower.
The same shader was helped by this patch and the previous.
Haswell, Broadwell, and Skylake had similar results. (Skylake shown)
total instructions in shared programs: 14399119 -> 14399113 (<.01%)
instructions in affected programs: 683 -> 677 (-0.88%)
helped: 1
HURT: 0
total cycles in shared programs: 532973113 -> 532971865 (<.01%)
cycles in affected programs: 524666 -> 523418 (-0.24%)
helped: 1
HURT: 0
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Cc: mesa-stable@lists.freedesktop.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106774
Since SSBOs can be written by other GPU threads, copy propagating a read
can cause the value to magically change. SSBO reads are also very
expensive, so doing it twice will be slower.
Haswell, Broadwell, and Skylake had similar results. (Skylake shown)
total instructions in shared programs: 14399120 -> 14399119 (<.01%)
instructions in affected programs: 684 -> 683 (-0.15%)
helped: 1
HURT: 0
total cycles in shared programs: 532978931 -> 532973113 (<.01%)
cycles in affected programs: 530484 -> 524666 (-1.10%)
helped: 1
HURT: 0
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Cc: mesa-stable@lists.freedesktop.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106774
This seems to have been missed in the move from autotools
This fixes the following build issue:
../src/gallium/auxiliary/vl/vl_winsys_dri.c:34:10: fatal error: X11/Xlib-xcb.h: No such file or directory
#include <X11/Xlib-xcb.h>
^~~~~~~~~~~~~~~~
Fixes: b1b65397d0
("meson: Build gallium auxiliary")
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
On GFX8+, there is a bug that affects TC-compatible depth surfaces
when the ZRange is not reset after LateZ kills pixels.
The workaround is to always set DB_Z_INFO.ZRANGE_PRECISION to match
the last fast clear value. Because the value is set to 1 by default,
we only need to update it when clearing Z to 0.0.
We also need to set the depth clear regs and to update
ZRANGE_PRECISION when initializing a TC-compat depth image to 0.
Original patch from James Legg.
This fixes random CTS fails with
dEQP-VK.renderpass.suballocation.formats.d32_sfloat_s8_uint.input.*
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105396
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
If the application asks for the maximum number of fragment input
components (128), use all of them plus some builtins that are
passed in the VUE, then we exceed the maximum number of used VUE
slots (32) and we break one assert that checks this limit.
Also, with separate shader objects, we add CLIP_DIST0, CLIP_DIST1
builtins in brw_compute_vue_map() because we don't know if
gl_ClipDistance is going to be read/write by an adjacent stage.
Fixes VK-GL-CTS CL#2569.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
They have a different frequency of updates and don't change when scissors
change.
I think this even fixes something in si_update_vs_viewport_state.
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
This should add all the pieces to enable tess shaders on virgl.
v2: fixup transform to handle tess and strip out precise.
set default for max patch varyings to work around issue when
tess gets enabled from v1 caps but v2 caps aren't in place. (Elie)
Reviewed-by: Elie Tournier <elie.tournier@collabora.com>
GLSL 4.60 offically added this but games and older CTS suites actually
had shaders that did this, we may as well enable it everywhere.
Adding stable because it appears apps in the wild do this.
Acked-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: <mesa-stable@lists.freedesktop.org>
Commit 54ba73ef10 (configure.ac/meson.build: Fix -latomic test) fixed
some checks for -latomic, and then commit 54bbe600ec (configure.ac:
rework -latomic check) further extended the fixes in configure.ac but
not in Meson. This commit extends those fixes to the Meson tests.
Fixes: 54bbe600ec (configure.ac: rework -latomic check)
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
meson 0.43 gained support for optional modules, which clover wold like
to use. Since we require 0.44.1 now we can rely on them being available
for clover.
compile tested only.
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
v2: - Use -mpower8-vector in compiler test for altivec
- rename altivec option to power8
- reword power8 option description to be more clear, originally I
had made it a boolean, but replaced it with an auto option.
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The UBO push analysis pass incorrectly assumed that all values would fit
within a 32B chunk, and only recorded a bit for the 32B chunk containing
the starting offset.
For example, if a UBO contained the following, tightly packed:
vec4 a; // [0, 16)
float b; // [16, 20)
vec4 c; // [20, 36)
then, c would start at offset 20 / 32 = 0 and end at 36 / 32 = 1,
which means that we ought to record two 32B chunks in the bitfield.
Similarly, dvec4s would suffer from the same problem.
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Fixes to avoid building error after change in image->planes[] structure,
{bo,bo_offset} has to be replaced by address.{bo,offset}
and update is needed also in the assert() for debug builds.
external/mesa/src/intel/vulkan/anv_android.c:188:21:
error: no member named 'bo' in 'struct anv_image::(anonymous at external/mesa/src/intel/vulkan/anv_private.h:2647:4)'
image->planes[0].bo = bo;
~~~~~~~~~~~~~~~~ ^
1 error generated.
Fixes: bf34ef16ac ("anv: Use an address for each anv_image plane")
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Changes to avoid building error:
external/mesa/src/intel/vulkan/anv_android.c:131:72:
error: too few arguments to function call, expected 5, have 4
result = anv_bo_cache_import(device, &device->bo_cache, dma_buf, &bo);
~~~~~~~~~~~~~~~~~~~ ^
1 error generated.
(v2) Set the correct bo_flags based on support of 48bit addresses and soft-pin
Fixes: b0d50247a7 ("anv/allocator: Set the BO flags in bo_cache_alloc/import")
Fixes: e7d0378bd9 ("anv: Soft-pin client-allocated memory")
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We were enabling undefined memory checking for genxml values based on
Valgrind being installed at build time, even for release builds. This
generates piles and piles of assembly whenever you touch genxml.
With gcc 7.3.1 and -O3 and -march=native on a Kabylake with Valgrind
installed at build time:
text data bss dec hex filename
5978385 262884 13488 6254757 5f70a5 libvulkan_intel.so
3799377 262884 13488 4075749 3e30e5 libvulkan_intel.so
That's a 36% reduction in text size.
Fixes: 047ed02723 (vk/emit: Use valgrind to validate every packed field)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Now that we're using GitLab, let's take advantage of the "landing page"
README feature with some minimal information, mostly to point people to
the right resources.
Acked-by: Dylan Baker <dylan@pnwbakers.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
v2: intel_miptree_release() already takes care of the planes, no need
to hand-code the loop (Lionel)
Coverity ID: 1436909
Fixes: 3352f2d746 "i965: Create multiple miptrees for planar YUV images"
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
At least for PIPE_BUFFER, we could get the resource used as (for
example) R32F imageBuffer. So using cpp=1 from the rsc is wrong.
Signed-off-by: Rob Clark <robdclark@gmail.com>
In some cases we get plain tex opcodes (but w/ a lod argument).. in this
case always use the saml instruction.
Signed-off-by: Rob Clark <robdclark@gmail.com>
If using a fanin (collect) to collect of consecutive registers together,
we can CP mov's into the fanin, but not (abs) or (neg). No places that
allow those modifiers are consuming a fanin anyways. But this caused an
absneg to be lost between a ldgb and stgb for shaders like:
outputs[n] = abs(input[n])
Signed-off-by: Rob Clark <robdclark@gmail.com>
If we have a fanout (split) meta instruction to split the result of a
vector instruction, propagate the HALF flag back to the original
instruction. Otherwise result ends up in a full precision register
while instruction(s) that use the result look in a half-precision
register.
Signed-off-by: Rob Clark <robdclark@gmail.com>
image reads are handled via tex state, whereas image writes and atomics
are handled via SSBO state block. Previously we were only considering
image write, and not image atomics which also uses the SSBO state block.
Signed-off-by: Rob Clark <robdclark@gmail.com>
If FindProcIndex in egldispatchstubs.c is called with a name that's less than
the first entry in the array, it would end up trying to store an index of -1 in
an unsigned integer, wrap around to 2^32, and then crash when it tries to look
that up.
Change FindProcIndex so that it uses bsearch(3) instead of implementing its own
binary search, like the GLX equivalent FindGLXFunction does.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Workaround for bug in llvm that causes the GPU to hang in presence
of nested loops because there is an exec mask issue. The proper
solution is to fix LLVM but this might require a bunch of work.
This fixes a bunch of GPU hangs that happen with DXVK.
Vega10:
Totals from affected shaders:
SGPRS: 110456 -> 110456 (0.00 %)
VGPRS: 122800 -> 122800 (0.00 %)
Spilled SGPRs: 7478 -> 7478 (0.00 %)
Spilled VGPRs: 36 -> 36 (0.00 %)
Code Size: 9901104 -> 9922928 (0.22 %) bytes
Max Waves: 7143 -> 7143 (0.00 %)
Code size slightly increases because it inserts more branch
instructions but that's expected. I don't see any real performance
changes.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105613
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
ZRANGE_PRECISION(1) seems to be the default optimal value, but
it was only set for VI and older chips.
This fixes a rendering issue with Banished through DXVK, and
might fix more than that.
There is still the ZRANGE_PRECISION bug that we need to handle
but that can be fixed later.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
v2:
An attempt to support SpvExecutionModeStencilRefReplacingEXT's behavior
also follows, with the interpretation to said mode being we prevent
writes to the built-in FragStencilRefEXT variable when the execution
mode isn't set.
v3:
A more cautious reading of 1db44252d0 led
me to a missing change that would stop (what I later discovered were)
GPU hangs on the CTS test written to exercise this.
v4:
Turn FragStencilRefEXT decoration usage without StencilRefReplacingEXT
mode into a warning, instead of trying to make the variable read-only.
If we are to follow the originating extension on GL, the built-in
variable in question should never be readable anyway.
v5/v6: rebases.
v7:
Fix check for gen9 lost in rebase. (Ilia)
Reduce the scope of the bool used to track whether
SpvExecutionModeStencilRefReplacingEXT was used. Was in shader_info,
moved to vtn_builder. (Jason)
v8:
Assert for fragment shader handling StencilRefReplacingEXT execution
mode. (Caio)
Remove warning logic, since an entry point might not have
StencilRefReplacingEXT execution mode, but the global output variable
might still exist for another entry point in the module. (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The queue_manager thread can access the images from x11_present_to_x11,
hence this reorder prevents dereferencing of dangling pointers.
Cc: "18.1" <mesa-stable@lists.freedesktop.org>
Fixes: e73d136a02 ("vulkan/wsi/x11: Implement FIFO mode.")
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Remembering latest states of registers to eliminate redunant SET_CONTEXT_REG packets
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Remembering latest states of registers to eliminate redunant SET_CONTEXT_REG packets
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Remembering latest states of registers to eliminate redunant SET_CONTEXT_REG packets
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Remembering latest states of registers to eliminate redunant SET_CONTEXT_REG packets
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Remembering latest states of registers to eliminate redunant SET_CONTEXT_REG packets
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Remembering latest states of registers to eliminate redunant SET_CONTEXT_REG packets
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Use of void * in pointer arithmetic is illegal, use char * instead.
Fixes: cf54bd5e83 ("drisw: use shared memory when possible")
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Fixes truncation warning in gcc 8.1
Fixes: 8539c9bf31 ("gallium/radeon: add the kernel version into the renderer string")
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Fixes the gcc warning:
snprintf’ output between 26 and 33 bytes into a destination of size 32
Fixes: d5f7ebda3e ("ac: add LLVM build functions for subgroup instrinsics")
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The LLVM 6 code reduced it to a non-array call. We need to do that
with the new code too.
This fixes dEQP-VK.glsl.texture_functions.query.texturequerylod.*array* for radv.
Fixes: a9a7993441 "amd/common: use the dimension-aware image intrinsics on LLVM 7+"
Reviewed-by: Dave Airlie <airlied@redhat.com>
This hopefully adds virgl to the correct places and current statuses
of various extensions.
virgl of course relies on two external things
a) host driver that can support the features
b) up to date host virglrenderer library that can support the features.
This list will be maintained as latest (a) + (b) + mesa.
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Gentoo's ebuild system always adds -m32 to the compiler for doing x86_64
-> x86 cross builds, while meson expects it not to do that. This
results in an x86 -> x86 cross build, and assembly gets disabled.
Fixes: 2d62fc0646
("meson: disable x86 asm in fewer cases.")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Not all of the MESA_FORMAT and ISL_FORMAT helpers we use can properly
handle RGBX formats. Also, we don't want to make decisions based on
those in the first place because we can't render to RGBA and we use the
non-sRGB version to determine whether or not to allow CCS_E.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This reworks it to work like query_dma_buf_modifiers and, in particular,
makes it more flexible so that we can disallow a non-static set of
formats.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
We follow the same convention as isl_format_get_layout in having two
assertions to ensure that only valid formats are passed in. We also
check against the array size of the table because some valid formats
such as CCS formats will may be past the end of the table. This fixes
some potential out-of-bounds array access even in valid cases.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
We add two assertions instead of one because the first assertion that
format != ISL_FORMAT_UNSUPPORTED is more descriptive and checks for a
real but unsupported enumerant while the second ensures that they don't
pass in garbage values. We also update some other helpers to use
isl_format_get_layout instead of using the table directly so that they
get bounds checking too.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This makes the reasoning for why a cross compile is not using asm
clearer (hopefully).
v2: - fix typos
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
There were some places that were calling anv_semaphore_impl_cleanup and
neither deleting the semaphore nor setting the type back to NONE. Just
set it to NONE in impl_cleanup to avoid these issues.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106643
Fixes: 031f57eba "anv: Add a basic implementation of VK_KHX_external..."
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This isn't strictly necessary, but anyone running Cannonlake will
already have Kernel 4.5 or later, so there's no reason to support
the relocation model on Gen10+.
This will let us avoid dealing with them for new features.
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This patch enables soft-pinning of all buffers, allowing us to skip
relocation processing entirely. All systems with full PPGTT and > 4GB
of VMA should gain these benefits. This should be most Gen8+.
Unfortunately, this excludes a few systems:
- Cherryview (only has 32-bit addressing, despite 48-bit pointers)
- Broadwell with a 32-bit kernel
- Anybody running pre-4.5 kernel.
We may enable it for Cherryview in the future, but it would require
some tweaks to the memory zone.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
commit 92f01fc5f9 made i965 start emitting
VF cache invalidates when the high bits of vertex buffers change. But
we were not tracking vertex buffers emitted by BLORP. This was papered
over by a mistake where I emitted VF cache invalidates all the time,
which Chris fixed in commit 3ac5fbadfd.
This patch adds a new hook which allows the driver to track addresses
and request a VF cache invalidate as appropriate.
v2: Make the driver do the PIPE_CONTROL so it can apply workarounds
(caught by Jason Ekstrand). Rebase on anv bug fix.
v3: Don't screw up the boolean (caught by Jason Ekstrand).
Fixes: 92f01fc5f9 ("i965: Emit VF cache invalidates for 48-bit addressing bugs with softpin.")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This pass detects potential loop terminators and moves intructions
from the non breaking branch after the if-statement.
This enables both the new opt_if_simplification() pass and loop
unrolling to potentially progress further.
Unexpectedly this change speed up shader-db run times by ~3%
Ivy Bridge shader-db results (all changes in dolphin/ubershaders):
total instructions in shared programs: 9995662 -> 9995338 (-0.00%)
instructions in affected programs: 87845 -> 87521 (-0.37%)
helped: 27
HURT: 0
total cycles in shared programs: 230931495 -> 230925015 (-0.00%)
cycles in affected programs: 56391385 -> 56384905 (-0.01%)
helped: 27
HURT: 0
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
On gen8+, we have to VF cache flush whenever a vertex binding aliases a
previous binding at the same index modulo 4GiB. We deal with this in
Vulkan by ensuring that vertex buffers and the dynamic state (from which
BLORP pulls its vertex buffers) are in the same 4GiB region of the
address space. That doesn't work if we're reading clear colors with the
VF unit. In order to work around this we switch to using MI commands to
copy the clear value into the vertex buffer we allocate for the normal
constant data.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
i965 advertises the 16-bit R and RG formats through
eglQueryDmaBufFormatsEXT but falls over when a client tries to use or
asks more information about such a format because
driImageFormatToGLFormat returns MESA_FORMAT_NONE.
Found by Eero Tamminen.
v2: Add G16R16 formats (Lionel)
v3: Fix G16R16 mapping to mesa format (Jason)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106642
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com> (v2)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
mesa/st decides whether to update samplers after a program change based on
whether num_textures is nonzero. By not counting samplers in a uniform
struct, we would segfault in
KHR-GLES3.shaders.struct.uniform.sampler_vertex if it was run in the same
context after a non-vertex-shader-uniform testcase (as is the case during
a full conformance run).
v2: Implement using two separate pure functions instead of updating
pointers.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This doesn't seem to have done anything to my test results. However,
given that we've still got a class of GPU hangs, following the workarounds
that the closed driver does so that we get the same command sequences
seems like a good idea.
These together get the GLSL 3.00 unorm/snorm pack functions and
MESA_shader_integer operations working.
v2: Fix commit message typo.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This is basically the same as the GLSL lowering path.
v2: Fix typo in the link
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This is based on the glsl/lower_instructions.cpp implementation, but
should be much more readable.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
ufind_msb is easily expressed in terms of clz, and we can reduce ifind_msb
to that.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
V3D doesn't have opcodes for ibfe/ubfe, so we need to lower similarly to
glsl/lower_instructions.cpp.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
If you don't have HW to do bfi, then lowering bitfieldInsert to bfi makes
things harder than keeping the "bits" argument around.
This still uses bfm, but I've added the obvious lowering of bfm if you
need it.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Discovered by Roland Scheidegger.
The resource_create code uses GPU memory for PIPE_BIND_CUSTOM, but
malloc'd memory otherwise. Vertex and index buffers should use malloc'd
memory.
Cc: 18.0 18.1 <mesa-stable@lists.freedesktop.org>
You'd need src/broadcom/cle/ in the -I previously, for srcdir != builddir.
nir was fine at that, but automake didn't have it.
Bugzilla: https://github.com/anholt/mesa/issues/104
We were trying to read twice as many as the X server sent us, which
upset XCB:
[xcb] Too much data requested from _XRead
[xcb] This is most likely caused by a broken X extension library
[xcb] Aborting, sorry about that.
glx-free-context: ../../src/xcb_io.c:732: _XRead: Assertion `!xcb_xlib_too_much_data_requested' failed.
Fixing this takes 3 GLX piglit tests from crash to pass.
Fixes: 0852162950 "glx: Be more tolerant in glXImportContext (v2)"
Reviewed-by: Adam Jackson <ajax@redhat.com>
I'd like to eventually drop support for the confusing "an array of
a single empty string is meant to be interpreted as an empty array", so
let's start by not using it anymore.
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
The recent patch
mesa: Remove FLUSH_VERTICES from VAO state changes.
Pending draw calls on immediate mode or display list calls do
not depend on changes of the VAO state. So, remove calls to
FLUSH_VERTICES and flag _NEW_ARRAY as appropriate.
uncovered a problem that non immediate mode draw calls do only
flush outstanding immediate mode draws if FLUSH_UPDATE_CURRENT
is set in ctx->Driver.NeedFlush.
In that case, due to the sequence of _mesa_set_draw_vao commands
we could end up with the VAO from the FLUSH_VERTICES call set
into gl_context::Array._DrawVAO when the array draw is executed.
So the change pulls FLUSH_CURRENT out of _mesa_validate_* calls
into the array draw calls being validated.
The change introduces a new macro FLUSH_FOR_DRAW beside FLUSH_VERTICES
and FLUSH_CURRENT that flushes on changed current attributes as well
as on outstanding immediate mode draw calls. Use FLUSH_FOR_DRAW
in the non immediate mode draw code paths.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106594
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
This is the SSBO analogue to fe0647. User supplied data must
be a multiple of GL_SHADER_STORAGE_BUFFER_OFFSET_ALIGNMENT.
This fixes 44 GLES31 tests on airlied@'s GLES31 sketch branches with
Nvidia hardware, but this patch standalone can applied to master. The
alignment restriction on Nvidia is 32, hence the default value.
Example tests:
dEQP-GLES31.functional.ssbo.layout.random.all_shared_buffer.0
dEQP-GLES31.functional.ssbo.layout.multi_basic_types.single_buffer.std430
v2: Move to a better place in case statement
v3: Rebase
Reviewed-by: Dave Airlie <airlied@redhat.com>
If EXEC_OBJECT_PINNED is set, we don't want to emit any relocations.
We simply want to add the BO to the validation list, and possibly mark
it as writeable. The new brw_use_pinned_bo() interface does just that.
To avoid having to make every caller consider both the relocation and
softpin cases, we make emit_reloc() call brw_use_pinned_bo() when given
a softpinned buffer.
We also can't grow buffers that are softpinned - the mechanism places a
larger BO at the same offset as the original, which requires moving BOs
around in the VMA. With softpin, we only allocate enough VMA for the
original size of the BO.
v2: Assert that BOs aren't pinned if the kernel says we should move them
(feedback from Chris Wilson)
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
This introduces a new fast virtual memory allocator integrated with our
BO cache bucketing. For larger objects, it falls back to the simple
free-list allocator (util_vma).
This puts the allocators in place but doesn't enable softpin yet.
v2:
(feedback from Chris Wilson)
- Check (bo->kflags & EXEC_OBJECT_PINNED) instead of a global flag
- Avoid vma_free(0ull) on the err_free path.
- Only enable if the kernel says we have full PPGTT support
- Make bucketing allocators more resistant to failing to grow arrays
(feedback from Scott Phillips)
- Don't use node after popping it from the list.
- Avoid undefined behavior in canonicalization by reusing new helper
- Comment updates
(feedback from myself)
- Avoid __vma_alloc vs. vma_alloc by making a zero_high_bits helper
to return a non-canonical address with the high bits zeroed.
- Don't shadow loop variable 'i' when destroying things (ugly; worked)
v3:
- Replace zero_high_bits with new common gen_48b_address helper.
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
If window system supports Y-tiling but not CCS_E, we currently create an
internal CCS for any window system buffers and then resolve right before
handing it off to X or Wayland. In the case of the single-sampled
shadow of a multi-sampled window system buffer, this is pointless
because the only thing we do with it is use it as a MSAA resolve target
so we do MSAA resolve -> CCS resolve -> hand to the window system.
Instead, just disable CCS for the shadow and then the MSAA resolve will
write uncompressed directly into it. If the window system supports
CCS_E, we will still use CCS_E, we just won't do internal CCS.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Instead of having it be a general "is this a winsys image" boolean, make
it more specific to the actual purpose.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Instead of the state stack that's based on copying a dummy instruction
around, we start using a logical stack of brw_insn_states. This uses a
bit less memory and is way less conceptually bogus.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Prior to gen8, the flag [sub]register number is in a different spot on
3src instructions than on other instructions. Starting with Broadwell,
they made it consistent. This commit fixes bugs that occur when a
conditional modifier gets propagated into a 3src instruction such as a
MAD.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Instead of doing a memcpy, this moves us to start with a blank
instruction (memset to zero) and copy the fields over one at a time.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The emitted buffer_subdata/texture_subdata call didn't match the
respective signatures.
v2: Actually emit buffer_subdata call.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
On pre-4.13 kernels, which don't support I915_EXEC_BATCH_FIRST, we move
the validation list entry to the end...but incorrectly left the exec_bo
array alone, causing a mismatch where exec_bos[0] no longer corresponded
with validation_list[0] (and similarly for the last entry).
One example of resulting breakage is that we'd update bo->gtt_offset
based on the wrong buffer. This wreaked total havoc when trying to use
softpin, and likely caused unnecessary relocations in the normal case.
Fixes: 29ba502a4e (i965: Use I915_EXEC_BATCH_FIRST when available.)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
When the i-th target format is set, all previous target formats
must be non-zero to avoid hangs. In other words, without this
if a fragment shader exports mrt0, mrt2 and mrt3, the GPU hangs
because the target format of mrt1 is zero.
This fixes DXVK GPU hangs with "Seven: The Days Long Gone",
"GTA V" and probably more games.
Cc: "18.0" 18.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Otherwise on pre-GFX9, if the constant layout allows both TESS_EVAL and
GEOMETRY shaders, but the PIPELINE has only GEOMETRY, it would return the
GEOMETRY shader for the TESS_EVAL shader.
This would cause the flush_constants code to emit the GEOMETRY constants
to the TESS_EVAL registers and then conclude that it did not need to set
the GEOMETRY shader registers.
Fixes: dfff9fb6f8 "radv: Handle GFX9 merged shaders in radv_flush_constants()"
CC: 18.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This pass turns:
if (cond) {
} else {
do_work();
}
into:
if (!cond) {
do_work();
} else {
}
Here's the vkpipeline-db stats (from affected shaders) on Polaris10:
Totals from affected shaders:
SGPRS: 17272 -> 17296 (0.14 %)
VGPRS: 18712 -> 18740 (0.15 %)
Spilled SGPRs: 1179 -> 1142 (-3.14 %)
Code Size: 1503364 -> 1515176 (0.79 %) bytes
Max Waves: 916 -> 911 (-0.55 %)
This pass only affects Serious Sam 2017 (Vulkan) on my side. The
stats are not really good for now. Some shaders look quite dumb
but this will be improved with further NIR passes, like ifs
combination.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Rename and change the prototype for consistency regarding
nir_tex_instr_is_query(). This function will be used in the
following patch.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This just separates the reloc list vs. BO set cases and lets us avoid an
allocation if relocs->deps->entries == 0.
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
Previously, we did this weird thing where we left space and an empty
relocation for use in a hypothetical MI_BATCH_BUFFER_START that would be
added to the secondary later. Then, when it came time to chain it into
the primary, we would back that out and emit an MI_BATCH_BUFFER_START.
This worked well but it was always a bit hacky, fragile and ugly. This
commit instead adds a helper for rewriting the MI_BATCH_BUFFER_START at
the end of an anv_batch_bo and we use that helper for both batch bo list
cloning and handling returns from secondaries. The new helper doesn't
actually modify the batch in any way but instead just adjusts the
relocation as needed.
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
The only reason we were calling it in the middle was that one of the
cases for figuring out the secondary command buffer execution type
wanted batch_bo->length which gets set by batch_bo_finish. It's easy
enough to recalculate and now batch_bo_finish is called in a sensible
location.
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
Now that we've done all that refactoring, addresses are now being
directly written into surface states by ISL and BLORP whenever a BO is
pinned so there's really nothing to do besides enable it.
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
It's safer to set them there because we have the opportunity to properly
handle combining flags if a BO is imported more than once.
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
References to pinned BOs won't need to be relocated at a later
point, so just write the final value of the reference into the bo
directly.
Add a `set` to the relocation lists for tracking dependencies that
were previously tracked by relocations. When a batch is executed, we
add the referenced pinned BOs to the exec list.
v2: - visit bos from the dependency set in a deterministic order (Jason)
v3: - compar => compare, drat (Jason)
- Reworded commit message, provided by (Jordan)
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Soft pinning lets us satisfy the binding table address
requirements without using both sides of a growing state_pool.
If you do use both sides of a state pool, then you need to read
the state pool's center_bo_offset (with the device mutex held) to
know the final offset of relocations that target the state pool
bo.
By having a separate pool for binding tables that only grows in
the forward direction, the center_bo_offset is always 0 and
relocations don't need an update pass to adjust relocations with
the mutex held.
v2: - don't introduce a separate state flag for separate binding tables (Jason)
- replace bo and map accessors with a single binding_table_pool accessor (Jason)
v3: - assert bt_block->offset >= 0 for the separate binding table (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The state_pools reserve virtual address space of the full
BLOCK_POOL_MEMFD_SIZE, but maintain the current behavior of
growing from the middle.
v2: - rename block_pool::offset to block_pool::start_address (Jason)
- assign state pool start_address statically (Jason)
v3: - remove unnecessary bo_flags tampering for the dynamic pool (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Some trivial help now, but it also prevents ~40 regressions caused by
Samuel's "nir: implement the GLSL equivalent of if simplication in
nir_opt_if" patch.
All Gen4+ platforms had similar results. (Skylake shown)
total instructions in shared programs: 14369557 -> 14369555 (<.01%)
instructions in affected programs: 442 -> 440 (-0.45%)
helped: 2
HURT: 0
total cycles in shared programs: 532425772 -> 532425743 (<.01%)
cycles in affected programs: 6086 -> 6057 (-0.48%)
helped: 2
HURT: 0
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
d8d18516b0 and 03fb13f646 added some patterns to undo conversions like
(('ior', ('flt', a, b), ('flt', a, c)), ('flt', a, ('fmax', b, c)))
If further optimization cause some of the operands to either be the same
or be constants, undoing the transformation can lead to further savings.
I don't know why these patterns were not added in those patches. I did
not check to see which specific patterns actually helped. I just added
all of them for symmetry. This prevents some loop unrolling regressions
Plane Shift caused by Samuel's "nir: implement the GLSL equivalent of if
simplication in nir_opt_if" patch.
Skylake and Broadwell had similar results. (Skylake shown)
total instructions in shared programs: 14369768 -> 14369557 (<.01%)
instructions in affected programs: 44076 -> 43865 (-0.48%)
helped: 141
HURT: 0
helped stats (abs) min: 1 max: 5 x̄: 1.50 x̃: 1
helped stats (rel) min: 0.07% max: 1.52% x̄: 0.66% x̃: 0.60%
95% mean confidence interval for instructions value: -1.67 -1.32
95% mean confidence interval for instructions %-change: -0.72% -0.59%
Instructions are helped.
total cycles in shared programs: 532430629 -> 532425772 (<.01%)
cycles in affected programs: 1170832 -> 1165975 (-0.41%)
helped: 101
HURT: 5
helped stats (abs) min: 1 max: 160 x̄: 48.54 x̃: 32
helped stats (rel) min: <.01% max: 8.49% x̄: 2.76% x̃: 2.03%
HURT stats (abs) min: 2 max: 22 x̄: 9.20 x̃: 4
HURT stats (rel) min: <.01% max: 0.05% x̄: 0.02% x̃: <.01%
95% mean confidence interval for cycles value: -53.64 -38.00
95% mean confidence interval for cycles %-change: -3.06% -2.20%
Cycles are helped.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Implement ir_binop_vector_extract using NIR operations. Based on SPIR-V
to NIR approach.
This fixes:
dEQP-GLES3.functional.shaders.indexing.moredynamic.with_value_from_indexing_expression_fragment
Piglit's glsl-fs-vec4-indexing-8.shader_test
CC: mesa-stable@lists.freedesktop.org
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Iago Toral <itoral@igalia.com>
Adds suppport for ARB_fragment_shader_interlock. We achieve
the interlock and fragment ordering by issuing a memory fence
via sendc.
Signed-off-by: Plamena Manolova <plamena.manolova@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
This extension provides new GLSL built-in functions
beginInvocationInterlockARB() and endInvocationInterlockARB()
that delimit a critical section of fragment shader code. For
pairs of shader invocations with "overlapping" coverage in a
given pixel, the OpenGL implementation will guarantee that the
critical section of the fragment shader will be executed for
only one fragment at a time.
Signed-off-by: Plamena Manolova <plamena.manolova@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
After bebe3d626e, b->fail_jump is prepared after vtn_create_builder
which can longjmp(3) to it through its vtx_assert()s. This corrupts
the stack and creates confusing core dumps, so we need to avoid it.
While there, I decided to print the offending values for debugability.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The driver must support at least one of
PIPE_CAP_TGSI_FS_COORD_ORIGIN_UPPER_LEFT
PIPE_CAP_TGSI_FS_COORD_ORIGIN_LOWER_LEFT
and one of
PIPE_CAP_TGSI_FS_COORD_PIXEL_CENTER_HALF_INTEGER
PIPE_CAP_TGSI_FS_COORD_PIXEL_CENTER_INTEGER
otherwise glsl_to_tgsi will fire an assert.
ORIGIN_UPPER_LEFT is the default convention, and is supported by
all mesa drivers, hence it seems reasonable to always report the caps
to be enabled. On gles ORIGIN_LOWER_LEFT is generally not supported,
so we rely on the caps reported by the host that depend on whether we
run on an GL or an EGL host.
For PIXEL_CENTER it is completely host driver dependend on what is
supported, and since we do not report the actual host driver capabilities
it is best to mark both as supported, this is how it works for a GL
host too.
Fixes:
dEQP-GLES3.functional.shaders.builtin_variable.fragcoord_xyz
dEQP-GLES3.functional.shaders.metamorphic.bubblesort_flag.variant_1
dEQP-GLES3.functional.shaders.metamorphic.bubblesort_flag.variant_2
Reviewed-by: Gurchetan Singh <gurcetansingh@chromium.org>
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Signed-off-by: Jakob Bornecrantz <jakob@collabora.com>
The value returned by tgsi_util_get_texture_coord_dim() does not
account for the sample index. This means image_fetch_coords() will not
fetch it, leading to a null deref in ac_build_image_opcode() which
expects it to be present (the return value of ac_num_coords() *does*
include the sample index).
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Cc: "18.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This was not previously handled correctly. For example,
push_constant_stages might only contain MESA_SHADER_VERTEX because
only that stage was changed by CmdPushConstants or
CmdBindDescriptorSets.
In that case, if vertex has been merged with tess control, then the
push constant address wouldn't be updated since
pipeline->shaders[MESA_SHADER_VERTEX] would be NULL.
Use radv_get_shader() instead of getting the shader directly so that
we get the right shader if merged. Also, skip emitting the address
redundantly - if two merged stages are set in push_constant_stages
this change would have made the address get emitted twice.
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Cc: "18.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
With GFX9 merged shaders, active_stages would be set to the original
stages specified if shaders were not cached, but to the stages still
present after merging if they were.
Be consistent and use the original stages.
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Cc: "18.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
v2 (Jason Ekstrand):
- Split the blorp bit into it's own patch and re-order a bit
- Use anv_address helpers
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This commit renames add_surface_state_reloc to add_surface_reloc and
makes it takes an address. We also rename add_image_view_relocs to
add_surface_state_relocs because it takes an anv_surface_state and
doesn't really care about the image view anymore.
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
Instead of storing a BO and offset separately, use an anv_address. This
changes anv_fill_buffer_surface_state to use anv_address and we now call
anv_address_physical and pass that into ISL.
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
This refactors surface state filling to work entirely in terms of
anv_addresses instead of offsets. This should make things simpler for
when we go to soft-pin image buffers. Among other things,
add_image_view_relocs now only cares about the addresses in the surface
state and doesn't really need the image view anymore.
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
These will be used to assign virtual addresses to soft pinned
buffers in a later patch.
Two allocators are added for separate 'low' and 'high' virtual
memory areas. Another alternative would have been to add a
double-sided allocator, which wasn't done here just because it
didn't appear to give any code complexity advantages.
v2 (Scott Phillips):
- rename has_exec_softpin to use_softpin (Jason)
- Only remove bottom one page and top 4 GiB from virt (Jason)
- refer to comment in anv_allocator about state address + size
overflowing 48 bits (Jason)
- Mention hi/lo allocators vs double-sided allocator in
commit message (Chris)
- assign state pool memory ranges statically (Jason)
v3 (Jason Ekstrand):
- Use (LOW|HIGH)_HEAP_(MIN|MAX)_ADDRESS rather than (1 << 31) for
determining which heap to use in anv_vma_free
- Only return de-canonicalized addresses to the heap
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
The test pseudo-randomly makes allocations and deallocations with
the virtual memory allocator and checks that the results are
consistent. Specifically, we test that:
* no result from the allocator overlaps an already allocated range
* allocated memory fulfills the stated alignment requirement
* a failed result from the allocator could not have been fulfilled
* memory freed to the allocator can later be allocated again
v2: - fix if() in test() to actually run fill()
v3: - add c++11 build flag (Jason)
- test the full 64-bit range (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This is simple linear-walk first-fit allocator roughly based on the
allocator in the radeon winsys code. This allocator has two primary
functional differences:
1) It cleanly returns 0 on allocation failure
2) It allocates addresses top-down instead of bottom-up.
The second one is needed for Intel because high addresses (with bit 47
set) need to be canonicalized in order to work properly. If we allocate
bottom-up, then high addresses will be very rare (if they ever happen).
We'd rather always have high addresses so that the canonicalization code
gets better testing.
v2: - [scott-ph] remove _heap_validate() if NDEBUG is defined (Jordan)
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
Tested-by: Scott D Phillips <scott.d.phillips@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This adds a RADV_DEBUG=startup option to dump more info about
instance creation and device enumeration.
A common question end users have is why the direver is not loading
for them, and this has two common reasons:
1) They did not install the driver.
2) AMDGPU is not used for the card in the kernel.
This adds some info messages so we can easily get a some useful
output from end users.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Errors are not that common of a case so we can eat a slight perf
hit in having to call a function and do a runtime check.
In turn this makes debugging random errors happening for end users
easier, because they don't have to have a debug build on hand.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Totals from affected shaders:
SGPRS: 80 -> 80 (0.00 %)
VGPRS: 48 -> 48 (0.00 %)
Code Size: 2120 -> 2096 (-1.13 %) bytes
Max Waves: 16 -> 16 (0.00 %)
Only two Rise of Tomb Raider shaders are affected on my side.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Patch skips useless and possibly dangerous calls down to the driver
in case invalid arguments were given. I noticed this would be happening
with demo of Darwinia game. AFAIK this does not fix anything but makes
this path safer and more like how other API functions are implemented.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
CXXLD gallium_dri.la
../../../../src/broadcom/.libs/libbroadcom.a(clif_dump.o): In function `clif_dump_packet':
src/broadcom/clif/clif_dump.c:87: undefined reference to `v3d33_clif_dump_packet'
src/broadcom/clif/clif_dump.c:85: undefined reference to `v3d41_clif_dump_packet'
../../../../src/broadcom/.libs/libbroadcom.a(clif_dump.o): In function `clif_process_worklist':
src/broadcom/clif/clif_dump.c:140: undefined reference to `v3d41_clif_dump_gl_shader_state_record'
src/broadcom/clif/clif_dump.c:144: undefined reference to `v3d33_clif_dump_gl_shader_state_record'
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
This makes this use all 32 bits, so future sets need to be
defined in a new struct.
Reviewed-by: Jakob Bornecrantz <jakob@collabora.com>
Signed-off-by: Jakob Bornecrantz <jakob@collabora.com>
This avoids loop unrolling regressions in Wolfenstein II on DXVK
with an upcoming optimisation series from Samuel.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This was terribly wrong, I forced use of 32-bit pointers when
emitting shader descriptor pointers. This fixes GPU hangs with
LLVM 5&6 because 32-bit pointers are only supported with LLVM 7.
Fixes: 88d1ed0f81 ("radv: emit shader descriptor pointers consecutively")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Gallium drivers don't expose this yet due to:
"st/mesa: use PIPE_CAP_GLSL_FEATURE_LEVEL_COMPATIBILITY"
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This requires layered FBOs from GL 3.2.
Gallium drivers don't expose this yet due to:
"st/mesa: use PIPE_CAP_GLSL_FEATURE_LEVEL_COMPATIBILITY"
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Gallium drivers don't expose this yet due to:
"st/mesa: use PIPE_CAP_GLSL_FEATURE_LEVEL_COMPATIBILITY"
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Bindless texture handles can be passed via vertex attribs using this type.
They use the double codepath, so don't use st_pipe_vertex_format.
Cc: 18.0 18.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Bindless texture handles can be passed via vertex attribs using this type.
This fixes a bunch of bindless piglit tests on radeonsi.
Cc: 18.0 18.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
I disliked removing the const here, function tables are meant
to be const just to avoid having to think about them,
make a second table for the shm vs non-shm paths to use.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Implements putImageShm from DRIswrastLoaderExtension.
If XShm extension is not available, or fails, it will fallback on
regular XPutImage().
Tested on Linux only with 16bpp and 32bpp visual.
(airlied: tested on 24bpp as well)
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
If drisw_loader_funcs implements put_image_shm, allocates display
target data with shared memory and display with put_image_shm().
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
If the DRIswrastLoaderExtension implements putImageShm, bind it to
drisw_loader_funcs.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add new API to put and get an image using shared memory. Instead of only
passing the data pointer, 3 arguments are given: the shmid, the data
offset and the shmaddr.
Bump interface version.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This just renames this as we want to add an shm handle which
isn't really drm related.
Originally by: Marc-André Lureau <marcandre.lureau@gmail.com>
(airlied: I used this sed script instead)
This was generated with:
git grep -l 'DRM_API_' | xargs sed -i 's/DRM_API_/WINSYS_/g'
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
When using multiple RT write messages to the same RT such as for
dual-source blending or all RT writes in SIMD32, we have to set the
"Last Render Target Select" bit on all write messages that target the
last RT but only set EOT on the last RT write in the shader.
Special-casing for dual-source blend works today because that is the
only case which requires multiple RT write messages per RT. When we
start doing SIMD32, this will become much more common so we add a
dedicated bit for it.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The only reason it was it's own opcode was so that we could detect it
and adjust the source register based on the payload setup. Now that
we're using the ATTR file for FS inputs, there's no point in having a
magic opcode for this.
v2 (Jason Ekstrand):
- Break the bit which removes the CINTERP opcode into its own patch
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This replaces the special magic opcodes which implicitly read inputs
with explicit use of the ATTR file.
v2 (Jason Ekstrand):
- Break into multiple patches
- Change the units of the FS ATTR to be in logical scalars
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This is better than compression control because it naturally extends to
SIMD32.
v2:
- Push/pop instruction state around adjusted codegen (Ken)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The fall-back does not work correctly in SIMD16 mode and the register
allocator should ensure that we never hit this case anyway.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Commit 92f01fc5f9 ("i965: Emit VF cache invalidates for 48-bit
addressing bugs with softpin.") tried to only emit the VF invalidate if
the high bits changed, but it accidentally always set need_invalidate to
true; causing it to emit unconditionally emit the pipe control before
every primitive.
Fixes: 92f01fc5f9 ("i965: Emit VF cache invalidates for 48-bit addressing bugs with softpin.")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106708
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The modifiers array hasn't been initialised by then, much less with data
that would need freeing.
Move the label after the loop to fix this.
Fixes: c80c08e226 ("vulkan/wsi/x11: Add support for DRI3 v1.2")
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
---
v2: rebased on top of 432df741e0 "dri_util: Add
R10G10B10{A,X}2 translation between DRI and mesa_format."
0 is not a valid value for the __DRI_IMAGE_FORMAT_* enum.
It is, however, the value of MESA_FORMAT_NONE, which two of the callers
(i915 & i965) checked for.
The other callers (that check for errors, ie. st/dri) already check for
__DRI_IMAGE_FORMAT_NONE.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Resources created with modifiers are treated as scanout because there is
no way for applications to specify the usage (though that capability may
be useful to have in the future). Currently all the resources created by
applications with modifiers are for scanout, so make sure they have bind
flags set accordingly.
This is necessary in order to properly export buffers for such resources
so that they can be shared with scanout hardware.
Tested-by: Daniel Kolesa <daniel@octaforge.org>
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Thierry Reding <treding@nvidia.com>
Resources created for scanout but without modifiers need to be treated
as pitch-linear. This is because applications that don't use modifiers
to create resources must be assumed to not understand modifiers and in
turn won't be able to create a DRM framebuffer and passing along which
modifiers were picked by the implementation.
Tested-by: Daniel Kolesa <daniel@octaforge.org>
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Thierry Reding <treding@nvidia.com>
favicon.png is just gears.png resized to 64x64, and favicon.ico is
generated using this command, adapted from the ImageMagick example [1]:
$ convert favicon.png -background black \
\( -clone 0 -resize 16x16 \) \
\( -clone 0 -resize 32x32 \) \
\( -clone 0 -resize 48x48 \) \
\( -clone 0 -resize 64x64 \) \
-delete 0 -alpha off -colors 256 favicon.ico
We could edit every html page to add `<link rel="icon" href="favicon.ico" />`,
but there's not much point as pretty much every browser will pick it up
automatically if the file is named `favicon.ico` and is in the root folder.
[1] http://www.imagemagick.org/Usage/thumbnails/#favicon
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
This reduces the number of SET_SH_REG packets which are emitted
for applications that use more than one descriptor set per stage.
We should be able to emit more SET_SH_REG packets consecutively
(like push constants and vertex buffers for the vertex stage),
but this will be improved later.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This will allow to emit consecutive shader pointers for
reducing the number of emitted SET_SH_REG packets, which
is recommended.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Previously, findFirstUse() only considered reads "uses". This fixes that
by making it check both an instruction's sources and definitions. It
also shortens both findFistUse() and findFirstDef() along the way.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Literally the same as the AMD ext.
Passes *indirect_draw_count* CTS tests.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This improves dota2 performance for me by 11% when I force the
GPU DPM level to low (otherwise dota2 is CPU limited for 4k on my
threadripper), which should be a large part of the radv-amdvlk gap.
(For me with that was radv 60.3 -> 66.6, while AMDVLK does about 68
fps)
It looks like dota2 rendered the GUI with a bunch of draws with
a SetScissors before almost each draw, causing a lot of pipeline
stalls.
I'm not really happy with the duplication of code, but overriding
radeon_set_context_reg would also be messy since we have the
pre-recorded pipelines and a bunch of si_cmd_buffer code, as well
as some memory->context reg loads for which things would be more
complicated.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
A later patch will make use of this in other places. Also, remove
dependency on undefined behavior of left-shifting a signed value.
v2: - move function into a separate header (Chris)
v3: (by Ken) Add new header to the various build systems.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Make sure only those components are written to that are specified in the
write mask.
Fixes:
dEQP-GLES2.functional.shaders.operator.common_functions.sign.lowp_float_vertex
dEQP-GLES2.functional.shaders.operator.common_functions.sign.lowp_float_fragment
dEQP-GLES2.functional.shaders.operator.common_functions.sign.mediump_float_vertex
dEQP-GLES2.functional.shaders.operator.common_functions.sign.mediump_float_fragment
dEQP-GLES2.functional.shaders.operator.common_functions.sign.highp_float_vertex
dEQP-GLES2.functional.shaders.operator.common_functions.sign.highp_float_fragment
dEQP-GLES2.functional.shaders.operator.common_functions.sign.lowp_vec3_vertex
dEQP-GLES2.functional.shaders.operator.common_functions.sign.lowp_vec3_fragment
dEQP-GLES2.functional.shaders.operator.common_functions.sign.mediump_vec3_vertex
dEQP-GLES2.functional.shaders.operator.common_functions.sign.mediump_vec3_fragment
dEQP-GLES2.functional.shaders.operator.common_functions.sign.highp_vec3_vertex
dEQP-GLES2.functional.shaders.operator.common_functions.sign.highp_vec3_fragment
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
In cases like
IDIV TEMP[0].xy TEMP[0].xx TEMP[1].yy
the result will be written to the same register that is also a source register.
Since the components are evaluated one by one, this may result in overwriting
the source value for a later operation. Work around this by adding another
temporary to store the result if the destination temporary index is equal to
one of the source temporary indices.
Fixes:
dEQP-GLES2.functional.shaders.operator.binary_operator.div.*
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This reverts commit 79fe00efb4.
This reverts commit f5e8b13f78.
This reverts commit d21c086d81.
They broke the Android build and I'd rather not leave it broken
for the long holiday weekend.
Rename the (un)map_gtt functions to (un)map_map (map by
returning a map) and add new functions (un)map_tiled_memcpy that
return a shadow buffer populated with the intel_tiled_memcpy
functions.
Tiling/detiling with the cpu will be the only way to handle Yf/Ys
tiling, when support is added for those formats.
v2: Compute extents properly in the x|y-rounded-down case (Chris Wilson)
v3: Add units to parameter names of tile_extents (Nanley Chery)
Use _mesa_align_malloc for the shadow copy (Nanley)
Continue using gtt maps on gen4 (Nanley)
v4: Use streaming_load_memcpy when detiling
v5: (edited by Ken) Move map_tiled_memcpy above map_movntdqa, so it
takes precedence. Add intel_miptree_access_raw, needed after
rebasing on commit b499b85b0f.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We stream from a tiled and aligned source into an unaligned user buffer,
so we need to use _mm_storeu_si128.
Fixes: d21c086d81 (i965/tiled_memcpy: inline movntdqa loads in tiled_to_linear)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
For certain EGLImage cases, we represent a single slice or LOD of an
image with a byte offset to a tile and X/Y intratile offsets to the
given slice. Most of i965 is fine with this but it breaks blorp. This
is a terrible way to represent slices of a surface in EGL and we should
stop some day but that's a very scary and thorny path. This gets blorp
to start working with those surfaces and fixes some dEQP EGL test bugs.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106629
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
GS is tested, tessellation is untested.
Have outputs_written_before_ps for HW VS and outputs_written for other
stages. The reason is that COLOR and BCOLOR alias for HW VS, which
drives elimination of VS outputs based on PS inputs.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This fixes shader images where we always bind stObj->pt and not individual
gl_texture_images.
Roughly based on i965 commit 845ad2667a
which does a similar thing but for a different reason.
This fixes GL CTS assertion failures introduced by Ilia.
Cc: 18.0 18.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
The reference for MOVNTDQA says:
For WC memory type, the nontemporal hint may be implemented by
loading a temporary internal buffer with the equivalent of an
aligned cache line without filling this data to the cache.
[...] Subsequent MOVNTDQA reads to unread portions of the WC
cache line will receive data from the temporary internal
buffer if data is available.
This hidden cache line sized temporary buffer can improve the
read performance from wc maps.
v2: Add mfence at start of tiled_to_linear for streaming loads (Chris)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Optimize AVX-512 PA Assemble (PA_STATE_OPT). Reduced generated code by
about 4x, MSVC compiler was going crazy making temporaries and
split-loading inputs onto the stack unless explicit AVX-512 load ops
were added
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Added two new files for a wrapper function for initialization
v2: added missing include for single architecture builds
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
It's recommended by the instruction combining pass, and
RadeonSI also runs it.
This pass used to segfault with one shader of F12017 in the
past, but it no longer crashes. Maybe the LLVM IR generated
by RADV has changed.
Polaris10:
Totals from affected shaders:
SGPRS: 441352 -> 441648 (0.07 %)
VGPRS: 310888 -> 300784 (-3.25 %)
Spilled SGPRs: 13576 -> 12983 (-4.37 %)
Code Size: 22560328 -> 22420544 (-0.62 %) bytes
Max Waves: 40755 -> 41366 (1.50 %)
Vega10:
Totals from affected shaders:
SGPRS: 442848 -> 442000 (-0.19 %)
VGPRS: 310396 -> 300460 (-3.20 %)
Spilled SGPRs: 13708 -> 12906 (-5.85 %)
Code Size: 22479428 -> 22336216 (-0.64 %) bytes
Max Waves: 45783 -> 46506 (1.58 %)
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
When glUseProgram is used, references to the included shaders are
added in ctx->Shader.ReferencedProgram. But those references are not
decreased when the shader data is deallocated. Thus, those shaders
are leaked.
Explicitely remove the pending references to these shaders.
Fixes: e6506b3cd2 ("mesa: retain gl_shader_programs after glDeleteProgram if they are in use")
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Functionality already covered by ARB_texture_view, patch also
adds missing 'gles guard' for enums (added in f1563e6392).
Tested via arb_texture_view.*_gles3 tests and individual app
utilizing texture view with ETC2.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This doesn't nothing special currently because we don't create
any copy_var instructions, but this is needed for the next patch.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Instead of directly using intel_obj->buffer. Among other things
intel_bufferobj_buffer() will update intel_buffer_object::
gpu_active_start/end, which are used by glBufferSubData() to decide
which path to take. Fixes a failure in the Piglit
ARB_shader_image_load_store-host-mem-barrier Buffer Update/WaW tests,
which could be reproduced with a non-standard glGetTexSubImage
implementation (see bug report).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105351
Reported-by: Nanley Chery <nanleychery@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Otherwise the specified surface state will allow the GPU to access
memory up to BufferOffset bytes past the end of the buffer. Found by
inspection.
v2: Protect against out-of-range BufferOffset (Nanley).
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
The buffer texture size calculations (should be easy enough, right?)
are repeated in three different places, each of them subtly broken in
a different way. E.g. the image load/store path was never fixed to
clamp to MaxTextureBufferSize, and none of them are taking into
account the buffer offset correctly. It's easier to fix it all in one
place.
Cc: mesa-stable@lists.freedesktop.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106481
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
This reverts commit c0ed52f614. It was
preventing the image format validation from being done on buffer
textures, which is required to ensure that the application doesn't
attempt to bind a buffer texture with an internal format incompatible
with the image unit format (e.g. of different texel size), which is
not allowed by the spec (it's not allowed for *any* texture target,
whether or not there is spec wording restricting this behavior
specifically for buffer textures) and will cause the driver to
calculate texel bounds incorrectly and potentially crash instead of
the expected behavior.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106465
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
WQM is pretty reliable now on LLVM 7, so let us just use
DPP + WQM.
This gives approximately a 1.5% performance increase on the
vrcompositor built-in benchmark.
v2: Use ac_build_quad_swizzle.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
I'm guessing an earlier version of the website used to have the page
contents in <frames>, but this isn't the case anymore so just drop the
unnecessary `target="_main"` :)
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This unifies the explicit rasterization discard as well as the implicit
rasterization disabled logic (which we need for another state tracker),
which really should do the exact same thing.
We'll now toss out the prims early on in setup with (implicit or
explicit) discard, rather than do setup and binning with them, which
was entirely pointless.
(We should eventually get rid of implicit discard, which should also
enable us to discard stuff already in draw, hence draw would be
able to skip the pointless clip and fallback stages in this case.)
We still need separate logic for only null ps - this is not the same
as rasterization discard. But simplify the logic there and don't count
primitives simply when there's an empty fs, regardless of depth/stencil
tests, which seems perfectly acceptable by d3d10.
While here, also fix statistics for primitives if face culling is
enabled.
No piglit changes.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
The only function that doesn't need to call access_raw is map_blit. If
it takes the blitter path, it will happen as part of intel_miptree_copy.
If map_blit takes the blorp path, brw_blorp_copy_miptrees will handle
doing whatever resolves are needed. This should save us resolves in
quite a few cases and will probably help performance a bit.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
It's faster than the blitter and can handle things like stencil properly
so it doesn't require software fallbacks.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The blorp path (called first) can do anything the blitter path can do so
it's just dead code.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
On gen4-5, we try the blitter before we even try blorp. On newer
platforms, blorp can do everything the blitter can so there's no point
in even having the blitter fall-back path.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Using meta for anything is fairly aweful and definitely has more CPU
overhead. However, it also uses the 3D pipe and is therefore likely
faster in terms of GPU time than the blitter. Also, the blitter code
has so many early returns that it's probably not buying us that much.
We may as well just use meta all the time instead of working over-time
to find the tiny case where we can use the blitter. We keep gen4-5
using the old blit paths to avoid perturbing old hardware too much.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We'd like to start using soft-pin to assign BO addresses up front, and
never move them again. Our previous plan for dealing with 48-bit VF
cache bugs was to relocate vertex buffers to the low 4GB, so we'd never
have addresses that alias in the low 32 bits. But that requires moving
buffers dynamically.
This patch tracks the last seen BO address for each vertex/index buffer,
and emits a VF cache invalidate if the high bits change. (Ideally, we
won't hit this case very often.) This should work for the soft-pin
case, but unfortunately won't work in the relocation case, as we don't
actually know the addresses. So, we have to use both methods.
v2: Mention that the cache uses a <VertexBufferIndex, Address> tuple
more explicitly (suggested by Scott). Mention "single batch" too
(suggested by Chris).
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
We're planning to start managing the PPGTT in userspace in the near
future, rather than relying on the kernel to assign addresses. While
most buffers can go anywhere, some need to be restricted to within 4GB
of a base address.
This commit adds a "memory zone" parameter to the BO allocation
functions, which lets the caller specify which base address the BO will
be associated with, or BRW_MEMZONE_OTHER for the full 48-bit VMA.
Eventually, I hope to create a 4GB memory zone corresponding to each
state base address.
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Prevents corrupting the upper 32 bits of draw->recv_sbc when
draw->send_sbc resets to 0 (which currently happens when the window is
unbound from a context and bound to one again), which in turn caused
loader_dri3_swap_buffers_msc to calculate target_msc with corrupted
upper 32 bits. This resulted in hangs with the Xorg modesetting driver
as of xserver 1.20 (older versions and other drivers ignored the upper
32 bits of the target MSC, which is why this wasn't noticed earlier).
Cc: mesa-stable@lists.freedesktop.org
Bugzilla: https://bugs.freedesktop.org/106351
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Fix build error.
CC v3d_blit.lo
In file included from v3d_blit.c:27:0:
v3d_context.h:39:10: fatal error: v3d_drm.h: No such file or directory
#include "v3d_drm.h"
^~~~~~~~~~~
Fixes: 8a793d42f1 ("v3d: Switch the vc5 driver to using the finalized V3D UABI.")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Since we have the common WSI code, we use vkCmdCopyImageToBuffer
instead.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
SRGB stores are broken. We had compensation code in the
resolve path but none in the copy path. Since we don't
want any conversion and it does not matter for DCC,
just make everything UNORM instead.
This happened to cause wrong colors for the PRIME path, as
that uses image->buffer copies which always use the compute
path.
CC: 18.0 18.1 <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106587
Reviewed-by: Dave Airlie <airlied@redhat.com>
Patch changes entrypoints generator to not skip this extension even
though it is set as disabled in the xml. We also need compilation
flag VK_USE_PLATFORM_ANDROID_KHR to be enabled.
It looks like this extension got disabled in commit 69f447553c.
v2: just remove the whole 'supported' attrib check + remove
vk_icd.h compilation fix (fix in VulkanHeaders instead)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The host side hasn't got support for this feature yet, so don't enable it
unless we get the caps from the host.
This makes the texture buffer range piglit tests skip now.
Fixes: fe0647df5a (virgl: add offset alignment values to to v2 caps struct)
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Just let the extension detection do its job as we will be adding
compat profile support in future, also we want these to work
with compat profile version overrides.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We're not sharing 32_32_32 formats between different GPUs, so we
do not have to align for vega on pre-vega cards.
Fixes: e361970ed7 "radv: Add support for IMG_DATA_FORMAT_32_32_32."
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
I've confirmed after 77554d220d we no
longer need this to pass some tests from another api (as we no longer
generate the bogus extra null tris in the first place).
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
This pass is required by the Midgard compiler; our instruction set uses
NIR-style booleans (~0 for true) but lacks a dedicated b2f instruction.
Normally, this lowering pass would be implemented in a backend-specific
algebraic pass, but this conflicts with the existing iand->b2f pass in
nir_opt_algebraic.py, hanging the compiler. This patch thus makes the
existing pass optional (default on -- all other backends should remain
unaffected), adding an optional pass for lowering the opposite
direction.
v2: Defer lowering until late algebraic optimisations to allow
optimising the b2f instruction itself.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
This is useful for every user of ISL. Drop the comment along the way to
match similar functions in ISL.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
intel_miptree_supports_{ccs,mcs,hiz} ensures the format is valid for the
color or depth miptree before the miptree is assigned an aux_usage.
alloc_aux switches on the aux_usage so don't assert that the format is
valid.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Synchronize the requirements listed in isl_surf_get_ccs_surf with
intel_miptree_supports_ccs by importing a restriction from ISL. Some
implications:
* We successfully create every aux_surf in alloc_aux
* We only return false from alloc_aux if we run out of memory
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
The tgsi_info.num_tokens fix broke llvmpipe's detection of no-op shaders.
Fix the code to check for num_instructions <= 1 instead.
Fixes: 8fde9429c3 ("tgsi: fix incorrect tgsi_shader_info::num_tokens
computation")
Tested-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Currently GLSL 1.4 is defined for all gallium drivers even only
GLSL 1.2 is supported as seen on etnaviv.
v1 -> v2:
- use _min(..) as suggested by Lucas Stach and Michel Dänzer
Fixes: 4560aad780 ("mesa: add GLSLVersionCompat constant")
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Some drivers (virgl) don't support GL4.4 or GLES3.1 yet,
so never fill in this const.
Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We were incrementing num_tokens in each loop iteration while parsing
the shader. But each call to tgsi_parse_token() can consume more than
one token (and often does). Instead, just call the tgsi_num_tokens()
function.
Luckily, this issue doesn't seem to effect any current users of this
field (llvmpipe just checks for <= 1, for example).
Reviewed-by: Neha Bhende<bhenden@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
All the shader program dependent handling is done on the level
of the gl_Context::Array._DrawVAO/_DrawVAOEnabledAttribs.
So, skip array element invalidation on _NEW_PROGRAM.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
For the VAO internal helper functions that may be called
with a non current VAO, flag the _NEW_ARRAY state only
if it is the current ctx->Array.VAO.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Pending draw calls on immediate mode or display list calls do
not depend on changes of the VAO state. So, remove calls to
FLUSH_VERTICES and flag _NEW_ARRAY as appropriate.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Mesa 18.1 series has not been released yet, so let's extend 18.0 lifetime.
v2: Add missing closing TR tags (Eric Engestrom)
CC: Andres Gomez <agomez@igalia.com>
CC: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
With the syncobj support in place, lets use it to implement the
EGL_ANDROID_native_fence_sync extension. This mostly follows previous
implementations in freedreno and etnaviv.
v2: Drop the flags (Eric)
Handle in_fence_fd already in job_submit (Eric)
Drop extra vc4_fence_context_init (Eric)
Dup fds with CLOEXEC (Eric)
Mention exact extension name (Eric)
Signed-off-by: Stefan Schake <stschake@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This gives us access to the fence created for the render job.
v2: Drop flag (Eric)
Signed-off-by: Stefan Schake <stschake@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
We need to know if the kernel supports syncobj submission since otherwise
all the DRM syncobj calls fail.
v2: Use drmGetCap to detect syncobj support (Eric)
Signed-off-by: Stefan Schake <stschake@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Require a version of libdrm with syncobj support.
v2: Don't require a libdrm_vc4, just bump core libdrm if vc4 enabled (by
anholt)
Signed-off-by: Stefan Schake <stschake@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
v2: Synchronized with kernel v2
v3: Update for the finalized kernel ABI (pad2 field)
Signed-off-by: Stefan Schake <stschake@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This was missed in the move back to the local uapi copy.
libdrm_vc4 only seems to consist of headers that also exist in the
Mesa tree.
Signed-off-by: Stefan Schake <stschake@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
With the previous patches, we now update the indirect clear color buffer
every time the clear color changes. Avoid redundant updates.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Allow callers to handle updating the indirect clear color buffer
themselves. This can reduce the number of clear color updates in the
case where a caller performs multiple fast clears with the same clear
color.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
If the aux state is CLEAR and clear color value has changed, only the
surface state must be updated. The bit-pattern in the aux buffer is
exactly the same.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This comment made more sense when it was above the calls to
intel_miptree_slice_set_needs_depth_resolve(). We stopped using these
functions at commit 554f7d6d02
("i965: Move depth to the new resolve functions").
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
For depth buffers, we avoid fast-clearing if the aux_state is already
CLEAR. We do the same for color buffers only if the clear color
doesn't change. We require that the clear colors match because, in
that case, we don't update the indirect clear color outside of BLORP.
Update the indirect clear color for color buffers as well. We'll
enable the same depth buffer optimization for color buffers in a
later patch.
Note that we're now actually updating the indirect clear color twice
in the case where we use BLORP to perform the fast-clear. This is
only temporary. In later patches, we'll prevent BLORP from performing
the update.
v2: Add more context to the commit message (Topi).
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reduce complexity and allow the next patch to delete some code. With
this change, clear operations will still be skipped and setting the
aux_state will cause no side-effects.
Remove the associated comment which implies an early return.
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This reverts commit 1d94aa1987.
The next patch will make depth miptrees use the clear color setter that
was originally being used for color miptrees. Go back to using the
isl_color_value parameter because it's the same type as the
fast_clear_color field used by color and depth miptrees.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
There isn't much that changes between the aux allocation functions.
Remove the duplicated code.
v2: Inline the switch statement (Jason).
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We're going to delete intel_miptree_alloc_ccs() in the next commit. With
that in mind, replace the use of this function in
do_single_blorp_clear() with intel_miptree_alloc_aux() and move the
delayed allocation logic to it's callers.
v2: Duplicate the delayed allocation comment (Topi Pohjolainen).
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The indirect clear color isn't correctly tracked in
intel_miptree::fast_clear_color. The initial value of ::fast_clear_color
is zero, while that of the indirect clear color is undefined.
Topi Pohjolainen discovered this issue with MCS buffers. This issue is
apparent when fast-clearing an MCS buffer for the first time with
glClearColor = {0.0,}. Although the indirect clear color is undefined,
the initial aux state of the MCS is CLEAR and the tracked clear color is
zero, so we avoid updating the indirect clear color with {0.0,}.
Make the indirect clear color match the initial value of
::fast_clear_color.
Note: although we only have to drop HiZ's BO_ALLOC_BUSY flag for gen10+,
we also drop it pre-gen10 to keep things simple. We add this flag back
for pre-gen10 in a later patch.
v2: Add a note about dropping HiZ's BO_ALLOC_BUSY flag (Topi).
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Add infrastructure for initializing the clear color BO.
intel_miptree_init_mcs is no longer needed with change.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Before this patch, the aux_state was actually AUX_INVALID because the BO
was never defined. This was fine on single slice miptrees because we
would fast-clear the resource right after creation. For multi-slice
miptrees on SKL+ however, this results in undefined behavior when
accessing a non-base slice. Here's a specific example:
1) Fast clear level 0
* Undefined CCS_D buffer allocated in "PASS_THROUGH" state.
* Level 0 transitions to the CLEAR state.
2) Render to level 1
* Level 1 may have a 2-bit pattern of 2's.
* Rendering with a 2 in the CCS is undefined.
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Before this patch, if we failed to initialize an MCS buffer, we'd
end up in a state in which the miptree thinks it has an MCS buffer,
but doesn't. We also leaked the clear_color_bo if it existed.
With this patch, we now free the miptree aux buffer resources and let
intel_miptree_alloc_mcs() know that the MCS buffer no longer exists.
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
That way the winsys might use a faster path when the global
BO list is NULL.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Having an entrypoint different than "main" doesn't mean we
have multiple shaders per module.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This allows the driver to load against the merged kernel DRM driver. In
the process, rename most of the build system variables and gallium
plumbing functions.
In the process of merging to the kernel, I renamed the driver to the
general product line's name (since we have both vc5 and vc6 supported
already). Since the ABI is finalized, move the header to include/drm-uapi.
At buffer resource validation time, if the resource handle is not yet
created and if the initial buffer bind flags and the tobind flags are
incompatible, just use the tobind flags to create the resource handle.
On the other hand, if the bind flags are compatible, we can combine
the bind flags for the resource handle creation.
Fixes piglit gl-3.1-buffer-bindings crash.
Reviewed-by: Brian Paul <brianp@vmware.com>
Cast the enum to GLint to avoid the compile warning:
/src/mesa/main/get.c:3005:19:
warning: comparison of constant -32768 with expression of type
'GLenum16' (aka 'unsigned short') is always false
-Wtautologicalia-constant-out-of-range-compare
Tests: compilation without this warning
Signed-off-by: jenny.q.cao <jenny.q.cao@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Seems that when the rnndb files for etniviv were updated/included back
in Nov 2017, hw/texdesc_3d.xml.h was missed from Makefile.sources and
meson.build. This was all during the conversion to meson, so it apears
to have slipped through the cracks. As such, this file has been missing
from the official tarballs since inclusion in Mesa, so the git trees
and tarballs differ.
Found due to lintian errors in the Debian packages.
Fixes: f1e1c60ff6 ("etnaviv: Update from rnndb")
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Thanks for your comment. This version has an additional boolean in the
fps_info struct to distinguish between fps and frame time calculation.
The struct is initialised in the respecting install functions for this
purpose.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Use pipe_reference to release old RAT surfaces.
RAT surface adds a reference to pool bo, so use reference counting for pool->bo
as well.
v2: Use the same pattern for both defrag paths
Drop confusing comment
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Use a single allocation of array type instead of the old-style array
allocation for the temp and immediate arrays.
Probably only makes a difference if they aren't used indirectly (so,
if we used them solely because there's too many temps or immediates).
In this case the sroa and early-cse passes can sometimes do some
optimizations which they otherwise cannot.
(As a side note, for the temp reg array, we actually really should
use one allocation per array id, not just one for everything.)
Note that the instcombine pass would actually promote such
allocations to single alloc of array type as well, but it's too late
for some artificial shaders we've seen to help (we don't want to run
instcombine at the beginning due to its cost, hence would need
another sroa/cse pass after instcombine). sroa/early-cse help there
because they can actually eliminate all of the huge shader, reducing
it to a single const output (don't ask...).
(Interestingly, instcombine also removes all the bitcasts we do on that
allocation for single-value gathering, and in the end directly indexes
into the single vector elements, which according to spec is only
semi-valid, but this happens regardless. Another thing instcombine also
does is use inbound GEPs, which is probably something we should do
manually as well - for indirectly indexed reg files llvm may not be
able to figure it out on its own, but we should be able to guarantee
all pointers are always inbound. In any case, by the looks of it
using single allocation with array type seems to be the right thing
to do even for ordinary shaders.)
No piglit change.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
We should stop walking through the CFG when the inner loop's
break block ends up as the same block as the outer loop's
continue block because we are already going to visit it.
This fixes the following assertion which ends up by crashing
in RADV or ANV:
SPIR-V parsing FAILED:
In file ../src/compiler/spirv/vtn_cfg.c:381
block->node.link.next == NULL
0 bytes into the SPIR-V binary
This also fixes a crash with a camera shader from SteamVR.
v2: make use of vtn_get_branch_type() and add an assertion
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106090
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106504
CC: 18.0 18.1 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The code didn't expect that, leading to crashes.
Fixes: 86d63b53a2 "gallium: remove aux_vertex_buffer_slot code"
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Since the fence can outlive the context, and all it really needs to wait
on a fence is the pipe, use the new fd_pipe reference counting to hold a
ref to the pipe and drop the ctx pointer.
This fixes a crash seen with (for example) glmark2:
#0 fd_pipe_wait_timeout (pipe=0xbf48678b3cd7b32b, timestamp=0, timeout=18446744073709551615) at freedreno_pipe.c:101
#1 0x0000ffffbdf75914 in fd_fence_finish (pscreen=0x561110, ctx=0x0, fence=0xc55c10, timeout=18446744073709551615) at ../src/gallium/drivers/freedreno/freedreno_fence.c:96
#2 0x0000ffffbde154e4 in dri_flush (cPriv=0xb1ff80, dPriv=0x556660, flags=3, reason=__DRI2_THROTTLE_SWAPBUFFER) at ../src/gallium/state_trackers/dri/dri_drawable.c:569
#3 0x0000ffffbecd8b44 in loader_dri3_flush (draw=0x558a28, flags=3, throttle_reason=__DRI2_THROTTLE_SWAPBUFFER) at ../src/loader/loader_dri3_helper.c:656
#4 0x0000ffffbecbc36c in glx_dri3_flush_drawable (draw=0x558a28, flags=3) at ../src/glx/dri3_glx.c:132
#5 0x0000ffffbecd91e8 in loader_dri3_swap_buffers_msc (draw=0x558a28, target_msc=0, divisor=0, remainder=0, flush_flags=3, force_copy=false) at ../src/loader/loader_dri3_helper.c:827
#6 0x0000ffffbecbcfc4 in dri3_swap_buffers (pdraw=0x5589f0, target_msc=0, divisor=0, remainder=0, flush=1) at ../src/glx/dri3_glx.c:587
#7 0x0000ffffbec98218 in glXSwapBuffers (dpy=0x502bb0, drawable=2097154) at ../src/glx/glxcmds.c:840
#8 0x000000000040994c in CanvasGeneric::update (this=0xfffffffff400) at ../src/canvas-generic.cpp:114
#9 0x0000000000411594 in MainLoop::step (this=this@entry=0x5728f0) at ../src/main-loop.cpp:108
#10 0x0000000000409498 in do_benchmark (canvas=...) at ../src/main.cpp:117
#11 0x00000000004071b0 in main (argc=<optimized out>, argv=<optimized out>) at ../src/main.cpp:210
Signed-off-by: Rob Clark <robdclark@gmail.com>
The cache doesn't hold a (strong) reference to the batch. So we
shouldn't be trying to drop a reference, as that leads to:
#0 0x0000ffffbecb37a0 in raise () from /lib64/libc.so.6
#1 0x0000ffffbeca159c in abort () from /lib64/libc.so.6
#2 0x0000ffffbecacf48 in __assert_fail_base () from /lib64/libc.so.6
#3 0x0000ffffbecacfa8 in __assert_fail () from /lib64/libc.so.6
#4 0x0000ffffbd28def0 in pipe_reference_described (ptr=0x4f47130, reference=0x0, get_desc=0xffffbd2e0f08 <__fd_batch_describe>) at ../src/gallium/auxiliary/util/u_inlines.h:88
#5 0x0000ffffbd28e188 in fd_batch_reference_locked (ptr=0x4f40de0, batch=0x0) at ../src/gallium/drivers/freedreno/freedreno_batch.h:258
#6 0x0000ffffbd28e9a8 in fd_bc_invalidate_resource (rsc=0x4f40ca0, destroy=true) at ../src/gallium/drivers/freedreno/freedreno_batch_cache.c:244
#7 0x0000ffffbd293778 in fd_resource_destroy (pscreen=0xedc170, prsc=0x4f40ca0) at ../src/gallium/drivers/freedreno/freedreno_resource.c:644
#8 0x0000ffffbd922674 in u_transfer_helper_resource_destroy (pscreen=0xedc170, prsc=0x4f40ca0) at ../src/gallium/auxiliary/util/u_transfer_helper.c:144
#9 0x0000ffffbd29527c in pipe_resource_reference (ptr=0x4f455d8, tex=0x0) at ../src/gallium/auxiliary/util/u_inlines.h:144
#10 0x0000ffffbd29548c in fd_surface_destroy (pctx=0x1012720, psurf=0x4f455d0) at ../src/gallium/drivers/freedreno/freedreno_surface.c:78
#11 0x0000ffffbd1f9c48 in pipe_surface_reference (ptr=0x4f471d0, surf=0x0) at ../src/gallium/auxiliary/util/u_inlines.h:113
#12 0x0000ffffbd1f9ef4 in util_copy_framebuffer_state (dst=0x4f471c8, src=0x0) at ../src/gallium/auxiliary/util/u_framebuffer.c:114
#13 0x0000ffffbd2e0e30 in __fd_batch_destroy (batch=0x4f47130) at ../src/gallium/drivers/freedreno/freedreno_batch.c:225
#14 0x0000ffffbd28e1b0 in fd_batch_reference_locked (ptr=0xfffffffff010, batch=0x0) at ../src/gallium/drivers/freedreno/freedreno_batch.h:262
#15 0x0000ffffbd28e6b0 in fd_bc_invalidate_context (ctx=0x1012720) at ../src/gallium/drivers/freedreno/freedreno_batch_cache.c:190
#16 0x0000ffffbd2e2b6c in fd_context_destroy (pctx=0x1012720) at ../src/gallium/drivers/freedreno/freedreno_context.c:139
#17 0x0000ffffbd2c3280 in fd5_context_destroy (pctx=0x1012720) at ../src/gallium/drivers/freedreno/a5xx/fd5_context.c:56
#18 0x0000ffffbd5b7a8c in st_destroy_context_priv (st=0xfd72f0, destroy_pipe=true) at ../src/mesa/state_tracker/st_context.c:281
Signed-off-by: Rob Clark <robdclark@gmail.com>
Bump xa minor to signal that the underlying mesa version is suitable for dri3.
This is a bit ugly since it doesn't relate to a specific xa interface change.
Recently there has been a number of fixes in mesa that helps enabling dri3
without any significant regressions in automated testing and common desktop
usage latency. However, the xf86-video-vmware driver has no other way to tell
but inspecting the xa version.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
By using the geometry shader output usage mask.
This improves all Vulkan demos that use a geometry shader
(ie. geometryshader, deferredshadows, viewportarray).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
For reducing the number of parameters that are exported by
the GS copy shader.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
An upcoming patch will run the shader info pass on the
geometry shader just before emitting the GS copy shader.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
It's clear that the original code meant to do this and there is even a
10-line comment explaining why. Originally, we had a simple function
for packing the clear colors which was unaware of sRGB. However, in
a6b66a7b26, when we started using ISL to do the packing, the wrong
format was used.
Fixes: a6b66a7b26 "intel/blorp: Use ISL instead of bitcast_color..."
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
This moves the extra queries to after the main query ended, instead
of doing it after the begin and hence doing nesting.
We also emit only (view count - 1) extra queries, as the main query
is already there for the first view.
This fixes the CTS occasionally getting stuck in
dEQP-VK.multiview.queries* waiting on results.
Fixes: 32b4f3c38d "radv/query: handle multiview queries properly. (v3)"
CC: 18.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
`dep_valgrind != []` now (0.45) produces a warning that is quite explicit:
WARNING: Trying to compare values of different types (DependencyHolder, list) using !=.
The result of this is undefined and will become a hard error in a future Meson release.
`dep_valgrind = []` used to be the recommended way to deal with
non-existant dependency, but these don't work with `.found()`, so now
the recommended way is to declare a impossible dependency, which
null_dep does for us in Mesa.
In short, we don't need and shouldn't check for `!= []` anywhere anymore.
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
These are going to be crazy and we are probably going to add
more scan stuff in the future. Also use switch cases instead.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
There is a compile warning from Android 8 (API version 26) from "include cutils/log.h"
warning: "Deprecated: don't include cutils/log.h, use either android/log.h or log/log.h"-W#warnings,
Change to include "log/log.h" on Android 8 or later major version to avoid this warning
Signed-off-by: jenny.q.cao <jenny.q.cao@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
We were never producing negative numbers for signed types.
Also fix only producing half the valid range for uint32, and
properly clamp signed values.
Because this now also properly tests snorm with actually negative
values, need to increase eps for such conversions. I believe these
cannot actually be hit in ordinary operation (e.g. if a snorm texture
is sampled and output to snorm RT, it will still go through snorm->float
and float->snorm conversion), so don't bother to do anything to fix
the bad accuracy (might be quite complex).
Basically, the issue is for something like snorm16->snorm8 that in the
end this will just use a 8 bit arithmetic right shift.
But the math behind it says we should actually do a division by 32767 / 127, which
is ~258, not 256. So the result can be one bit off (values have too large
magnitude), and furthermore, the shift has incorrect rounding (always rounds
down). For positive numbers, these errors have different direction, but
for negative ones they have the same, hence for some values the error will
be 2 bit in the end.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=106232
I don't think the hw resolve path can't handle multi-layer images.
This fixes all the:
dEQP-VK.renderpass.multisample_resolve.layers_*
tests on my VI card.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: <mesa-stable@lists.freedesktop.org>
This path should iterate across all layers, I've some ideas
for doing this in a single pass, but this is simpler for now.
This passes the tests because we don't use the fragment path
unless we have DCC, and we don't have DCC on layered images.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: <mesa-stable@lists.freedesktop.org>
When VK_PIPELINE_CREATE_DISABLE_OPTIMIZATION_BIT is set we skip NIR
linking optimisations and only run over the NIR optimisation loop
once similar to the GLSLOptimizeConservatively constant used by
some GL drivers.
We need to run over the opts at least once to avoid errors in LLVM
(e.g. dead vars it can't handle) and also to reduce the time spent
compiling the IR in LLVM.
With this change the Blacksmith Unity demos compilation times
go from 329760 ms -> 299881 ms when using Wine and DXVK.
V2: add bit to radv_pipeline_key
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106246
Fix SCons build error.
Linking build/linux-x86_64-debug/gallium/targets/libgl-xlib/libGL.so.1.5 ...
build/linux-x86_64-debug/mesa/libmesa.a(st_program.os): In function `st_translate_prog_to_nir':
src/mesa/state_tracker/st_program.c:392: undefined reference to `prog_to_nir'
Fixes: 5c33e8c772 ("st/nir: use NIR for asm programs")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
All vce firmwares with major version greater than or equal to 53 are supported
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
A fence can outlive the ctx it was created from (see glmark2).. etnaviv
doesn't actually need fence->ctx so lets remove it before someone makes
the mistake of assuming it is a valid pointer.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
- Change tilemgr TILE_ID encoding to use Morton-order (Z-order).
- Change locked tiles set to bitset. Makes clear, set, get much faster.
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Previously was using the draw topology, which may change if GS or Tess
are active. Only affected attributes marked with constant interpolation,
which limited the impact.
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
platform_x11 with dri3 needs inc_loader.
In file included from ../src/egl/drivers/dri2/platform_x11_dri3.c:35:0:
../src/egl/drivers/dri2/egl_dri2.h:41:32: fatal error: loader_dri3_helper.h: No such file or directory
In file included from ../src/egl/drivers/dri2/platform_x11.c:46:0:
../src/egl/drivers/dri2/egl_dri2.h:41:32: fatal error: loader_dri3_helper.h: No such file or directory
In file included from ../src/egl/drivers/dri2/egl_dri2.c:61:0:
../src/egl/drivers/dri2/egl_dri2.h:41:32: fatal error: loader_dri3_helper.h: No such file or directory
Cc: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
This results in better 16x and 8x quality when using these locations.
Verified with the piglit MSAA accuracy test.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Discovered by luck. Verified with the piglit MSAA accuracy test.
It also shows that the worst case EQAA 16s4f results in very good 4x MSAA
in the worst case.
Nine might not like these positions, but they are prettier to the eye and
GL doesn't care.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This can result in 2x increase in performance on non-harvested Kaveris.
v2: don't do it on radeon
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
The configure.ac logic added in commit
2ef7f23820 ("configure: check if
-latomic is needed for __atomic_*") makes the assumption that if a
64-bit atomic intrinsic test program fails to link without -latomic,
it is because we must use -latomic.
Unfortunately, this is not completely correct: libatomic only appeared
in gcc 4.8, and therefore gcc versions before that will not have
libatomic, and therefore don't provide atomic intrinsics for all
architectures. This issue was for example encountered on PowerPC with
a gcc 4.7 toolchain, where the build fails with:
powerpc-ctng_e500v2-linux-gnuspe/bin/ld: cannot find -latomic
This commit aims at fixing that, by not assuming -latomic is
available. The commit re-organizes the atomic intrinsics detection as
follows:
(1) Test if a program using 64-bit atomic intrinsics links properly,
without -latomic. If this is the case, we have atomic intrinsics,
and we're good to go.
(2) If (1) has failed, then test to link the same program, but this
time with -latomic in LDFLAGS. If this is the case, then we have
atomic intrinsics, provided we link with -latomic.
This has been tested in three situations:
- On x86-64, where atomic instrinsics are all built-in, with no need
for libatomic. In this case, config.log contains:
GCC_ATOMIC_BUILTINS_SUPPORTED_FALSE='#'
GCC_ATOMIC_BUILTINS_SUPPORTED_TRUE=''
LIBATOMIC_LIBS=''
This means: atomic intrinsics are available, and we don't need to
link with libatomic.
- On NIOS2, where atomic intrinsics are available, but some of them
(64-bit ones) require using libatomic. In this case, config.log
contains:
GCC_ATOMIC_BUILTINS_SUPPORTED_FALSE='#'
GCC_ATOMIC_BUILTINS_SUPPORTED_TRUE=''
LIBATOMIC_LIBS='-latomic'
This means: atomic intrinsics are available, and we need to link
with libatomic.
- On PowerPC with an old gcc 4.7 toolchain, where 32-bit atomic
instrinsics are available, but not 64-bit atomic instrinsics, and
there is no libatomic. In this case, config.log contains:
GCC_ATOMIC_BUILTINS_SUPPORTED_FALSE=''
GCC_ATOMIC_BUILTINS_SUPPORTED_TRUE='#'
With means that atomic intrinsics are not usable.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The vertex array Size and Stride attributes are now ubyte and short,
respectively. The glGet code needed to be updated to handle those
types, but wasn't.
Fixes the new piglit test gl-1.5-get-array-attribs test.
v2: fix inadvertant whitespace change, change COLOR_ARRAY_SIZE to UBYTE,
misc fixes suggested by Justin
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106450
Fixes: d5f42f96e1 ("mesa: shrink size of gl_array_attributes (v2)")
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
It's a per-application optimization, so it makes more sense
to do that in radv_handle_per_app_options().
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The only remaining users of gl_vertex_array are tnl based
drivers. So move everything related to that into tnl and
rename it accordingly.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Only tnl based drivers still use this array. So remove it
from core mesa and use Array._DrawVAO instead.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
For now store binding and attrib in brw_vertex_element.
The i965 driver still provides lots of opportunity to make use
of the unique binding information in the VAO which is currently not
taken from the VAO.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Instead of playing with Array._DrawArrays, make the feedback draw
path use Array._DrawVAO. Also st_RasterPos needs to use the VAO then.
v2: Use helper methods to get the offset values for array and binding.
Update comments.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Finally make use of the binding information in the VAO when
setting up arrays for draw.
v2: Emit less relocations also for interleaved userspace arrays.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
The input_to_index array is already available internally
when preparing vertex programs. Store the map in
struct st_vertex_program.
Also store the bitmask of mesa vertex processing inputs in
struct st_vp_variant.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Compute VAO buffer binding information past the position/generic0 mapping.
Scan for duplicate buffer bindings and collapse them into derived
effective buffer binding index and effective attribute mask variables.
Provide a set of helper functions to access the distilled
information in the VAO. All of them prefixed with _mesa_draw_...
to indicate that they are meant to query draw information.
v2: Also group user space arrays containing interleaved arrays.
Add _Eff*Offset to be copied on attribute and binding copy.
Update comments.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
This is needed for fixing CTS:
dEQP-GLES3.functional.occlusion_query.conservative*
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
If you have an indirect access to a constant buffer on r600/eg
use a vertex fetch in the shader. However apps have expected
behaviour on those out of bounds accessess (even if illegal).
If the constants were being uploaded as part of a larger
upload buffer, we'd set the range of allowed access to a lot
larger than required so apps would get values back from
other parts of the upload buffer instead of the expected out
of bounds access.
This fixes rendering bugs in Trine and Witcher 1, thanks
to iive for nagging me effectively until I figured it out :-)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91808
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
From the bspec docs for "Indirect State Pointers Disable":
"At the completion of the post-sync operation associated with this
pipe control packet, the indirect state pointers in the hardware are
considered invalid"
So the ISP disable is a post-sync type of operation which means that it
should be combined with a CS stall. Without this, the simulator throws
an error.
Fixes: 766d801ca "anv: emit pixel scoreboard stall before ISP disable"
Fixes: f536097f6 "i965: require pixel scoreboard stall prior to ISP disable"
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Perhaps with a new version of autoconf, I began seeing:
| checking the name lister (/usr/bin/nm -B) interface... ./configure: line 6973: External.*some_variable: command not found
| BSD nm
This is because AC_PROG_NM expands to
...
if $GREP 'External.*some_variable' conftest.out > /dev/null; then
lt_cv_nm_interface="MS dumpbin"
fi
...
I'm not sure if it's a bug in AC_PROG_NM that it doesn't call
AC_PROG_GREP, but it's easy enough for us to do it.
Out of tree builds can try to write into a directory that doesn't exist yet:
| Traceback (most recent call last):
| File "../../../mesa-18.0.2/src/intel/vulkan/anv_icd.py", line 46, in <module>
| with open(args.out, 'w') as f:
| IOError: [Errno 2] No such file or directory: 'vulkan/intel_icd.x86_64.json'
| Makefile:4882: recipe for target 'vulkan/intel_icd.x86_64.json' failed
Add missing MKDIR_GEN calls to solve this.
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
We want to make sure that all indirect state data has been loaded into
the EUs before disable the pointers.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Fixes: 78c125af39 ("anv/gen10: Ignore push constant packets during context restore.")
Invalidating the indirect state pointers might affect a previously
scheduled & still running 3DPRIMITIVE (causing page fault). So stall
on pixel scoreboard before that.
v2: Fix compile issue :(
v3: Stall on pixel scoreboard
v4: Drop the post sync operation (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Fixes: ca19ee33d7 ("i965/gen10: Ignore push constant packets during context restore.")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106243
On CNL and above, CCS_E supports 1010102 formats and R11G11B10F. We had
shut them off during early enabling because blorp_copy couldn't handle
them. Now it can handle 1010102 formats so we can turn them back on.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
nir_format_bitcast_uint_vec_unmasked can only be used to cast between
formats with uniform channel sizes. In particular, it cannot handle
10_10_10_2 formats. By making use of the NIR helper for uint vector
casts, we should now be able to bitcast between any two uint formats so
long as their channels are in RGBA order (possibly with channels
missing). In order to do this we need to rework the key a bit to pass
the actual formats instead of just the number of bits in each.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
This is a fairly direct port from blorp. The only real change is that
the nir_format_convert version doesn't assume that everything is a vec4.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
This adds helpers to ISL to convert an isl_color_value to and from
binary data encoded with a given isl_format. The conversion is done
using ISL's built-in format introspection so it's fairly slow as format
conversions go but it should be fine for a single pixel value. In
particular, we can use this to convert clear colors.
As a side-effect, we now rely on the sRGB helpers in libmesautil so we
need to tweak the build system a bit. All prior uses of src/util in ISL
were header-only.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Alpha-only formats are just linear. There's no need to specially
deliminate them as being in their own colorspace.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Previously, blorp could only blit into something that was renderable.
Thanks to recent additions to blorp, it can now blit into basically
anything so long as it isn't compressed.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
BLORP has supported 16x MSAA for quite a while now, we just never
bothered to enable it for CopyTexSubImage.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Now that blorp handles all the cases, why not? The only real change we
have to make is to stop using anv_swizzle_for_render() in blorp_blit
because it doesn't work for B4G4R4A4 and blorp now natively handles that.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Previously we only supported UINT formats because that's what blorp_copy
required. If we want to use it in blorp_blit, however, we need to
support everything.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
This commit adds support for the following formats as destination
formats even though the hardware does not support rendering to them:
- ISL_FORMAT_R24_UNORM_X8_TYPELESS
- ISL_FORMAT_A4B4G4R4_UNORM
- ISL_FORMAT_L8_UNORM_SRGB
- ISL_FORMAT_R9G9B9E5_SHAREDEXP
This is done by using a different format and emitting shader code to
fake it the rest of the way.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
nir_mask_shift_or is now defined in nir_format_convert.h so we can
delete the copy in blorp_blit.c.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
This commit makes blorp capable of swizzling anything even on hardware
that doesn't support texture swizzle.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
This helper encodes more details, specifically about Haswell, than the
previous asserts in isl_surface_state.c.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The previous version was sort-of strapped on in that it just adjusted
the blit rectangle and trusted in the fact that we would use texelFetch
and round to the nearest integer to ensure that the component positions
matched. This new version, while slightly more complicated, is more
accurate because all three components end up with exactly the same
dst_pos and so they will get interpolated and sampled at the same
texture coordinate. This makes the workaround suitable for using with
scaled blits.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
According to Vulkan spec:
"pColorBlendState is a pointer to an instance of the
VkPipelineColorBlendStateCreateInfo structure, and is ignored if the
pipeline has rasterization disabled or if the subpass of the render pass the
pipeline is created against does not use any color attachments."
Fixes tests from CL#2505:
dEQP-VK.renderpass.*.simple.color_unused_omit_blend_state
v2:
- Check that blend is not NULL before usage.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Just let validate_context_version() do it instead. This fixes
MESA_GL_VERSION_OVERRIDE for compat, it will also allow us to
enable new compat versions on a per driver bases in future.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This allows drivers to define what version of GLSL they support
in compat. This will be needed in order to support compat 3.2
without breaking drivers that wont support it.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
All drivers that support GLSL will later set their default GLSL versions
overriding this override call. They currently all call
_mesa_override_glsl_version() again later in order to support overrides.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Just leave it as 0 and let the drivers set it (as they already do)
to avoid redundantly initialising it.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This is really useful when debugging any sort of buffer management
issues, so just printing it during INTEL_DEBUG=bat,submit seems
reasonable. With bat, we're already spamming so much output that
it doesn't really hurt. With submit, it's still easy to grep for
the older information, and the new information is nice too.
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
Now that we're using ISL, a good chunk of brw_emit_depthstencil is
pointless checks which ISL will do for us anyway. Since we only have
one manual depth buffer emit function, move the useful bits into it.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We leave gen4-5 alone because the ISL code hasn't really been well-
tested on gen4-5 or with combined depth-stencil because we don't use
BLORP for depth operations on gen4-5. Also, the gen4-5 code has to deal
with intratile offsets for LOD hacks and ISL doesn't handle those yet.
We could make ISL handle gen4-5 capable or we could just not bother.
Among other things, this should make future platform enabling easier
because it means we don't have to update multiple (or hand-rolled!)
depth stencil emit paths.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The only reason why we had two atoms was that the one we used for gen7+
depended on _NEW_DEPTH and _NEW_STENCIL as well as _NEW_BUFFERS. Since
this is no longer true, we can combine them into one atom. We do add a
dependence on BRW_NEW_AUX_STATE but that should never get set on gen4-5
so adding it is a no-op for those platforms.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The hardware will AND these fields with the corresponding fields in
DEPTH_STENCIL_STATE so there's no real reason to toggle them on and off
based on state bits. This removes our reliance on the _NEW_DEPTH and
_NEW_STENCIL state bits and better matches what ISL does.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Certain things can change the aux usage or fast clear color of a depth
surface and we want to re-emit if that happens. For instance, if you do
a fast depth clear of an already clear depth surface, we will just set
the clear color and not do anything else. In that case, we could fail
to re-emit 3DSTATE_CLEAR_PARAMS and not get the new fast-clear color.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
I forgot to change the assert in the second helper function in a
previous change.
This hit the assert() on a Broadwell platform with 1 slice, 3
subslices but all EUs disabled in subslice 1 & 2.
Fixes: c1900f5b0f ("intel: devinfo: add helper functions to fill fusing masks values")
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
is_resource_supported returns if the combination of
target/internalformat is supported in at least one operation. Online
compression is only mandatory for glTexImage2D. Some formats doesn't
support online compression, but can be used in any case, with
glCompressed*D methods.
Without this commit, ETC2 internalformats were returning FALSE, even
for the drivers supporting it. So any other query (like
TEXTURE_COMPRESSED) was returning FALSE/NONE instead of the proper
value.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Chris recently fixed a bunch of genxml end < start bugs, as well as
booleans that are wider than a bit. These are way too easy to write, so
asserting that the fields are sane is a good plan.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
None of these are actually booleans. Tile Parameter is a tiling mode
enum. Display pipes take plane numbers. Predicate Enable has some
operations (and the default value of 6 was particular bogus).
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Python's assert can take both a condition and a string, which will cause
it to print the string if the assertion trips. (You can't use parens as
that creates a tuple.) Doing "condition and string" works in C, but
doesn't have the desired effect in Python.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We used to only initialize BLORP on Gen6+. When we added it on Gen4-5,
we forgot to destroy it unconditionally.
Fixes: 752d7af77a (i965: Add blorp support for gen4-5)
Reviewed-by: Matt Turner <mattst88@gmail.com>
Noticed while reviewing Tim Arceri's NIR inlining series.
Without his series:
instructions in affected programs: 16 -> 14 (-12.50%)
helped: 2
With his series:
instructions in affected programs: 196 -> 174 (-11.22%)
helped: 22
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
When compiling with LLVM 6.0 on x86 (32-bit) for Android, the test
fails to detect that -latomic is actually required, as the atomic
call is inlined.
In the code itself (src/util/disk_cache.c), we see this pattern:
p_atomic_add(cache->size, - (uint64_t)size);
where cache->size is an uint64_t *, and results in the following
link time error without -latomic:
src/util/disk_cache.c:628: error: undefined reference to '__atomic_fetch_add_8'
Fix the configure/meson test to replicate this pattern, which then
correctly realizes the need for -latomic.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
This simplifies kflag initialization, by creating a bufmgr-wide setting
for initial kflags, and just applying it whenever we create a new BO.
This also properly allows 48-bit addresses for imported BOs (via prime
or flink), which I had missed in my earlier 48-bit support series.
This will be useful when adding softpin support, as we'll want to add
EXEC_OBJECT_PINNED to initial_kflags as well.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
A couple of typos found by inspecting field.end - field.start, revealed
a few wide integers declared as bool and some that ended before they
started.
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fix build error after llvm-7.0.0svn r330669 ("InstCombine: Fix layering
by not including Scalar.h in InstCombine").
CXX rasterizer/jitter/libmesaswr_la-blend_jit.lo
rasterizer/jitter/blend_jit.cpp:816:20: error: use of undeclared identifier 'createInstructionCombiningPass'; did you mean 'createInstructionSimplifierPass'?
passes.add(createInstructionCombiningPass());
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
createInstructionSimplifierPass
Suggested-by: George Kyriazis <george.kyriazis@intel.com>
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-By: George Kyriazis <george.kyriazis@intel.com>
It is needed to destroy the v vector in scalar_argument
Fixes memory leaks on parameter set/bind.
v2: Drop redundant sclara_argument destructor
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
This rollbacks the revert of this same patch introduced in
commit 7b9c15628a.
And also squahes the following patch to prevent a piglit regression caused
by this change:
intel/compiler: Fix lower_conversions for 8-bit types.
Author: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
For 8-bit types the execution type is word. A byte raw MOV has 16-bit
execution type and 8-bit destination and it shouldn't be considered
a conversion case. So there is no need to change alignment and enter
in lower_conversions for these instructions.
Fixes a regresion in the piglit test "glsl-fs-shader-stencil-export"
that is introduced with this patch from the Vulkan shaderInt16 series:
'i965/compiler: handle conversion to smaller type in the lowering
pass for that'. The problem is caused because there is already a case
in the driver that injects Byte instructions like this:
mov(8) g127<1>UB g2<32,8,4>UB
And the aforementioned pass was not accounting for the special
handling of the execution size of Byte instructions. This patch
fixes this.
v2: (Jason Ekstrand)
- Simplify is_byte_raw_mov, include reference to PRM and not
consider B <-> UB conversions as raw movs.
v3: (Matt Turner)
- Indentation style fixes.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106393
Tested-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
These are subject to the general restriction that anything that is converted
to 64-bit needs to be aligned to 64-bit. We had this already in place for
32-bit to 64-bit conversions, so this patch generalizes the implementation
to take effect on any conversion to 64-bit from a source smaller than
64-bit.
Fixes assembly validation errors in the following CTS tests in BSW:
dEQP-VK.spirv_assembly.instruction.compute.sconvert.int16_to_int64
dEQP-VK.spirv_assembly.instruction.compute.uconvert.uint16_to_uint64
dEQP-VK.spirv_assembly.instruction.compute.sconvert.int16_to_uint64
Tested-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Remove the need of converting values that are documented in
hexadecimal. This patch would allow writing
<field name="3D Command Sub Opcode" ... default="0x1B"/>
instead of
<field name="3D Command Sub Opcode" ... default="27"/>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Gallium drivers use _mesa_remove_output_reads() via st_program to lower
output reads away. It seems better to just generate the right thing in
the first place.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Make sure that clamping in the pixel transfer operations is enabled/disabled
for packed floating point values just like it is done for single normal and
half precision floating point values.
This fixes a series of CTS tests with virgl that use r11f_g11f_b10f
buffers as target, and where virglrenderer reads these surfaces back
using the format GL_UNSIGNED_INT_10F_11F_11F_REV.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Fix build error after llvm-7.0svn r325155 ("Pass a reference to a module
to the bitcode writer.").
CXX rasterizer/jitter/libmesaswr_la-JitManager.lo
rasterizer/jitter/JitManager.cpp:548:30: error: reference to type 'const llvm::Module' could not bind to an lvalue of type 'const llvm::Module *'
llvm::WriteBitcodeToFile(M, bitcodeStream);
^
Suggested-by: George Kyriazis <george.kyriazis@intel.com>
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-By: George Kyriazis <george.kyriazis@intel.com>
Similar to swap_available path send invalidate to the driver because
egl/X11 is not watching for for server's invalidate events. The
dri2_copy_region path is trigerred when server supports DRI2 version
minor 1.
Tested with piglit egl tests for regression.
V2: Move invalidate from dri2_copy_region to swap_buffer common.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
According to EGL 1.4 spec, section 3.5.1 ("Creating On-Screen Rendering
Surfaces"), if config does not support the colorspace or alpha format
attributes specified in attrib_list (as defined for
eglCreateWindowSurface), an EGL_BAD_MATCH error is generated.
This fixes dEQP-EGL.functional.wide_color.*_888_colorspace_srgb (still
not merged,
https://android-review.googlesource.com/c/platform/external/deqp/+/667322),
which is crashing when trying to create a windows surface with RGB888
configuration and sRGB colorspace.
v2: Handle the fix in other backends (Tapani)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
With 16-bit support we can now do 32-bit packing, a follow-up patch will
rename the pass to something more generic.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Noitice that we don't need 'split' versions of the 64-bit to / from
16-bit opcodes which we require during pack lowering to implement these
operations. This is because these operations can be expressed as a
collection of 32-bit from / to 16-bit and 64-bit to / from 32-bit
operations, so we don't need new opcodes specifically for them.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
NIR assumes that booleans are always 32-bit, but Intel hardware produces
16-bit booleans for 16-bit comparisons. This means that we need to convert
the 16-bit result to 32-bit.
In the future we want to add an optimization pass to clean this up and
hopefully remove the conversions.
v2 (Jason): use the type of the source for the temporary and use
brw_reg_type_from_bit_size for the conversion to 32-bit.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
These are not supported in hardware for 16-bit integers.
We do the lowering pass after the optimization loop to ensure that we
lower ALU operations injected by algebraic optimizations too.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Not all bit-sizes may be supported natively in hardware for all operations.
This pass allows drivers to lower such operations to a bit-size that is
actually supported and then converts the result back to the original
bit-size.
Compiler backends control which operations and wich bit-sizes require
the lowering through a callback function.
v2: generalize this pass and make it available in NIR core (Rob, Jason)
v3: remove some temporaries and reduce nesting in instruction loop using
a continue statement (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
16-bit immediates need to replicate the 16-bit immediate value
in both words of the 32-bit value. This needs to be careful
to avoid sign-extension, which the previous implementation was
not handling properly.
For example, with the previous implementation, storing the value
-3 would generate imm.d = 0xfffffffd due to signed integer sign
extension, which is not correct. Instead, we should cast to
uint16_t, which gives us the correct result: imm.ud = 0xfffdfffd.
We only had a couple of cases hitting this path in the driver
until now, one with value -1, which would work since all bits are
one in this case, and another with value -2 in brw_clip_tri(),
which would hit the aforementioned issue (this case only affects
gen4 although we are not aware of whether this was causing an
actual bug somewhere).
v2: Make explicit uint32_t casting for left shift (Jason Ekstrand)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "18.0 18.1" <mesa-stable@lists.freedesktop.org>
From Intel Skylake PRM, vol 07, "Immediate" section (page 768):
"For a word, unsigned word, or half-float immediate data,
software must replicate the same 16-bit immediate value to both
the lower word and the high word of the 32-bit immediate field
in a GEN instruction."
This fixes the int16/uint16 negate and abs immediates that weren't
taking into account the replication in lower and upper words.
v2: Integer cases are different to Float cases. (Jason Ekstrand)
Included reference to PRM (Jose Maria Casanova)
v3: Make explicit uint32_t casting for left shift (Jason Ekstrand)
Split half float implementation. (Jason Ekstrand)
Fix brw_abs_immediate (Jose Maria Casanova)
Cc: "18.0 18.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The lowering pass was specialized to act on 64-bit to 32-bit conversions only,
but the implementation is valid for other cases.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We need to use 16-bit constants with 16-bit instructions,
otherwise we get the following validation error:
"Destination stride must be equal to the ratio of the sizes of
the execution data type to the destination type"
Because the execution data type is 4B due to the 32-bit integer
constant.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Always enable use of HW logical contexts to preserve GPU state between
batches when the kernel supports such constructs, continuing to enforce
the required support for gen6+.
At runtime, this effectively removes the BRW_NEW_CONTEXT flag (and the
upload of invariant state) from the start of every batch for any kernel
supporting contexts. So long as the older atoms are correctly listening
to the right flag (NEW_CONTEXT rather than NEW_BATCH) this should
eliminate a few redundant state uploads for the older platforms.
No piglits were harmed on ctg and ilk, both with and without logical
contexts.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This behaviour was changed in 1e5b09f42f. The commit message
for that says it is just a “tidy up” so my assumption is that the
behaviour change was a mistake. It’s a little hard to decipher looking
at the diff, but the previous code before that patch was:
if (builtin == SpvBuiltInFragCoord || builtin == SpvBuiltInSamplePosition)
nir_var->data.origin_upper_left = b->origin_upper_left;
if (builtin == SpvBuiltInFragCoord)
nir_var->data.pixel_center_integer = b->pixel_center_integer;
After the patch the code was:
case SpvBuiltInSamplePosition:
nir_var->data.origin_upper_left = b->origin_upper_left;
/* fallthrough */
case SpvBuiltInFragCoord:
nir_var->data.pixel_center_integer = b->pixel_center_integer;
break;
Before the patch origin_upper_left affected both builtins and
pixel_center_integer only affected FragCoord. After the patch
origin_upper_left only affects SamplePosition and pixel_center_integer
affects both variables.
This patch tries to restore the previous behaviour by changing the
code to:
case SpvBuiltInFragCoord:
nir_var->data.pixel_center_integer = b->pixel_center_integer;
/* fallthrough */
case SpvBuiltInSamplePosition:
nir_var->data.origin_upper_left = b->origin_upper_left;
break;
This change will be important for ARB_gl_spirv which is meant to
support OriginLowerLeft.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Fixes: 1e5b09f42f "spirv: Tidy some repeated if checks..."
SPIR-V allows to define the shift, offset and count operands for
shift and bitfield opcodes with a bit-size different than 32 bits,
but in NIR the opcodes have that limitation. As agreed in the
mailing list, this patch adds a conversion to 32 bits to fix this.
For more info, see:
https://lists.freedesktop.org/archives/mesa-dev/2018-April/193026.html
v2:
- src_bit_size will have zero value for variable bit-size operands (Jason).
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Apparently the somewhere between 1.1.70 and 1.1.73 the loader started
depending on this. The loader then creates a 1.0 instance, which gets
into funny situation because we have a 1.1 device.
No idea how to do line wrapping in Mako though, my random guesses
did not work.
CC: 18.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Initially, I didn't understand this feature. Turns out that all it
means is that you can switch multisample rates in the middle of a
zero-attachment subpass. We've been able to do this since forever.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Previously before fb077b0728, the LOD parameter was being used in place of the
sample index, which would only copy the first sample to all samples in the
destination image. After that multisample image copies wouldn't copy anything
from my observations.
This fixes some copy_and_blit CTS tests.
v3.1: - set lod to 0 for nir_txf_ms (Samuel)
v2: - use GLSL_SAMPLER_DIM_MS instead of 2D (Samuel)
- updated commit description (Samuel)
Fix this properly by copying each sample in a separate radv_CmdDraw and using a
pipeline with the correct rasterizationSamples for the destination image.
Cc: 18.0 18.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
First, this was iterating over the 3DSTATE_CONSTANT_* instruction
but trying to process fields of the 3DSTATE_CONSTANT_BODY substructure.
Secondly, the fields have been called Buffer[0] and Read Length[0],
for a while now, and we were not handling the subscripts correctly.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
With the new callback, Jason's newer batch decoder infrastructure
should be able to do just as well as the old open coded INTEL_DEBUG=bat
handling, with much less code. If there are any limitations, we'd like
to improve the common code rather than doing one-off hacks here.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Given an arbitrary batch, we don't always know what the size of certain
things are, such as how many entries are in a binding table. But it's
easy for the driver to track that information, so with a simple callback
we can calculate this correctly for INTEL_DEBUG=bat.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Making these part of libintel_common allows us to use them in the DRI
driver. The standalone tool binaries already link against the common
library, too, so it's no harder for them.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This unfortunately makes it malloc/realloc on every new batch, rather
than once at startup. But it ensures that the shadow buffer's size will
absolutely match the BO size. Otherwise, as we tune BATCH_SZ/STATE_SZ
or bufmgr cache bucket sizes, we may get a BO size that's rounded up,
and fail to allocate the shadow buffer large enough.
This doesn't fix any bugs today, as BATCH_SZ/STATE_SZ are the size of
a cache bucket, but it's better to be safe than sorry.
Reported-by: James Xiong <james.xiong@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
The gen_field_iterator only iterates the fields of a given gen_group.
If we want to iterate the fields of another gen_group contained as
field, we need to do it manually.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Struct fields might span several dwords, but iter_dword is incremented
up to the last dword of the current field before we print out the
struct's fields. We can't use iter_dword for computing the offset into
the pointer of data to decode.
v2: Fix displayed offset number (Ken)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
<register> & <struct> elements always have fixed length. The
get_length() method implies that we're dealing with an instruction in
which the length is encoded into the variable data but the field
iterator uses it without checking what kind of gen_group it is dealing
with.
Let's make get_length() report the correct length regardless of the
gen_group (register, struct or instruction).
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The Vertex Elements are now:
* VE 1: <BaseVertex/firstvertex, BaseInstance, VertexID, InstanceID>
* VE 2: <DrawID, is-indexed-draw, 0, 0>
VE1 is it kept as it was before, VE2 additionally contains the new
system value.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This VS system value contains if the draw command used to start the
rendering was an indexed draw command or a non-indexed one
(~0/0 respectively). Useful to calculate the gl_BaseVertex as:
(SYSTEM_VALUE_IS_INDEXED_DRAW & SYSTEM_VALUE_FIRST_VERTEX).
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
As the implementation is conservative, we can now enable it
by default. It can be disabled with RADV_DEBUG=nooutoforder.
Don't expect much more than 1% of improvements, but the gain
seems consistent.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Both the internal documentation and the results of testing this in the
CI suggest that this is unnecessary. Add the fixes tag because this
reduces an internal benchmark's startup time by about 17 seconds
(reported by Eero).
Fixes: 710b1d2e66 "i965/tex_image: Flush certain subnormal ASTC channel values"
Tested-by: Eero Tamminen <eero.t.tamminen@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
This is needed for gfx9 and later for all fmask surface index.
(Mentioned by Marek on irc)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Subpixel precision bias, dilation and the post-snap mode are supported on
GM200 and newer. The pre-snap mode is supported for triangle primitives on
GP100.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Although the specs are written against compatibility GL 4.3 and allows core
profile and GLES2+, it is exposed for GL 1.0+ and GLES1 and GLES2+.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
To silence warnings about unhandled switch values.
Untested otherwise.
v2: move the INT/UINT8 cases after the INT/UINT16 cases, per Eric.
Reviewed-by: Eric Anholt <eric@anholt.net>
With this we should have no passes in src/compiler/nir with any
dependencies on headers from core GL Mesa.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
A bo's ref_count was not being initialized when imported from an fd.
Therefore, we would fail to free the resource during VkFreeMemory().
This patch fixes applications like hifi VR in threaded mode, which
perform frequent imports/releases of IPC shared memory.
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
CC: 18.0 18.1 <mesa-stable@lists.freedesktop.org>
Similar to the transformation applied to linear_to_ytiled, also align
each readback from the ytiled source to a cacheline (i.e. transfer a
whole cacheline from the source before moving on to the next column).
This will allow us to utilize movntqda (_mm_stream_si128) in a
subsequent patch to obtain near WB readback performance when accessing
the uncached ytiled memory, an order of magnitude improvement.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
When mapping a region of the mipmap_tree, record which complementary
method to use to unmap it afterwards. By doing so we can avoid
duplicating the decision tree used when mapping and thereby eliminate
trivial errors that can be introduced if the two if-chains become out of
sync.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
If loading 64-bit vec3 values, a 4 component load would be followed
by a 2 component load and the resulting shuffle would fail as it
requires 2 4 components. This just expands the second results
vector out to 4 components.
This fixes 100 CTS tests:
dEQP-VK.spirv_assembly.type.vec3.*64*
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
We want to flag EXEC_OBJECT_CAPTURE, but we ought to preserve any
existing kflags. Today, there are none (as the program cache doesn't
support 48-bit addressing), but once we start using softpin, we'll
need to preserve EXEC_OBJECT_PINNED.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
We were trying to mark batch buffers with EXEC_OBJECT_CAPTURE, and
accidentally stomped EXEC_OBJECT_SUPPORTS_48B_ADDRESS in the process.
There's no reason to restrict batch buffers to the lower 4GB.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
The previous logic of the supports_48b_addresses wasn't actually
checking if i915.ko was running with full_48bit_ppgtt. The ENOENT
it was checking for was actually coming from the invalid context
id provided in the test execbuffer. There is no path in the
kernel driver where the presence of
EXEC_OBJECT_SUPPORTS_48B_ADDRESS leads to an error.
Instead, check the default context's GTT_SIZE param for a value
greater than 4 GiB
v2 (Ken): Fix in i965 as well.
v3 Check GTT_SIZE instead of HAS_ALIASING_PPGTT (Chris Wilson)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The blit here involves scaling since it's copying from I8 format to R8G8 format.
Half of source will be filtered out with PIPE_TEX_FILTER_NEAREST instruction, it
looks that GPU always uses the second half as source. Currently we use "1" as
the start point of x for R, then causing 1 source pixel of U component shift to
right. So "-1" should be the start point for U component.
Cc: 18.0 18.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The compiler queue was limited to 3 threads, so shader-db running
on a 16-thread CPU would have a bottleneck on the 3-thread queue.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Tested-by: Benedikt Schemmer <ben at besd.de>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
It will contain more variables.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Tested-by: Benedikt Schemmer <ben at besd.de>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reduce swizzle constraints to the ALPHA_IS_ON_MSB constraint and the clear
value of 1.
This significantly changes the DCC fast clear code, and fixes fast clear
for RGB formats without alpha.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
v2: require the previous level to be clearable for determining whether
the last unaligned level is clearable
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Use specific avx512 selection mechanism based on avx512er bit instead of
getHostCPUName(). LLVM 6.0.0 has a bug that reports wrong string for KNL
(fixed in 6.0.1).
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Sign-extend integer types to 32bit when specifying "%d" and add new %u
which zero-extends to 32bit. Improves printing of sub 32bit integer types
(i1 specifically).
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
However only if the file exists in DEBUG_OUTPUT_DIR. The expectation is
that AR rasterizerLauncher will start placing it there when launching
a workload (which is in a subsequent checkin)
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
- 64-bit cvt-to-float needs to be explicitly handled
- gathers need the right parameter types to work with doubles
Fixes draw-vertices piglit tests
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Previously there was a special target that blocked for the generation of
anv_entrypoints.h, with meson 0.44 we don't need this, we can use a new
language feature instead. The problem is that previously that blocking
target would hide a race condition for the generation of another header,
anv_extensions.h. Now the build sometimes fails when anv_extensions.h is
not generated in time.
v2: - clarify the race condition in the commit message (Emil)
CC: Mark Janes <mark.a.janes@intel.com>
Fixes: 92550d9b16
("meson: remove workaround for custom target creating .h and .c files")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This patch enables the Vulkan driver on Ice Lake h/w
with added warning about preliminary support.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
It would be nice to share the flags packet emit logic with flat shade
flags, but I couldn't come up with a good way while still using our pack
macros. We need to refactor this to shader record setup at compile time,
anyway.
Fixes ext_framebuffer_multisample-interpolation * centroid-*
This should fix help with intermittent GPU hangs in tests switching
formats while rendering small frames. Unfortunately, it didn't help with
the tests I'm having troubles with.
The next shader gets to start writing the register file during these
slots, so make sure we don't stomp over them.
The only case of hitting this that I could imagine would be dead writes.
GLES's GL_EXT_texture_type_2_10_10_10_REV allows uploading this type to an
unsized internalformat, and it should be non-color-renderable.
fbobject.c's implementation of the check for color-renderable is checks
that the texture has a 2101010 mesa format, so make sure that we have
chosen a 2101010 format so that check can do what it meant to.
Fixes KHR-GLES3.packed_pixels.pbo_rectangle.rgb on vc5.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
With this patch, _ElementSize is initialized along with the rest
of the vertex array attributes in new_draw_rasterpos_stage().
This fixes a crash in st_pipe_vertex_format() when running
topogun-1.06-orc-84k-resize trace file with VMware svga driver.
Reviewed-by: Brian Paul <brianp@vmware.com>
VASurfaceAttribExternalBuffers.pitches is indexed by
plane. Current implementation only supports single plane layout.
Reviewed-by: Kristian H. Kristensen <hoegsberg@chromium.org>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Previous bit-fields assignments are incorrect and will result certain mpeg4
decode failed due to wrong flag values. This patch fixes these assignments.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
num_channels has been introduced since "ac/surface: don't set
the display flag for obviously unsupported cases".
Based on RadeonSI.
Fixes: e29facff31 ("ac/surface: don't set the display flag for obviously unsupported cases (v2)")
Cc: 18.1 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
dcc_msaa_allowed is always false on GFX9+ and only true on VI
if RADV_PERFTEST=dccmsaa is set. This means DCC was disabled
in some situations where it should not.
This is likely going to fix a performance regression.
Fixes: 2f63b3dd09 ("radv: enable DCC for MSAA 2x textures on VI under an option")
Cc: 18.1 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
For all of the OpFOrd* comparisons except OpFOrdNotEqual the hardware
should probably already return false if one of the operands is NaN so
we don’t need to have an explicit check for it. This seems to at least
work on Intel hardware. This should reduce the number of instructions
generated for the most common comparisons.
For what it’s worth, the original code to handle this was added in
e062eb6415. The commit message for that says that it was to fix
some CTS tests for OpFUnord* opcodes. Even if the hardware doesn’t
handle NaNs this patch shouldn’t affect those tests. At any rate they
have since been moved out of the mustpass list. Incidentally those
tests fail on the nvidia proprietary driver so it doesn’t seem like
handling NaNs correctly is a priority.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The driver may have a reference on the separate stencil buffer for some
reason (like an unflushed job using it), so we can't directly free the
resource and should instead just decrement the refcount that we own.
Fixes double-free in KHR-GLES3.packed_depth_stencil.blit.depth32f_stencil8
on vc5.
Fixes: e94eb5e600 ("gallium/util: add u_transfer_helper")
Reviewed-by: Rob Clark <robdclark@gmail.com>
The internal-type-bpp path is for surfaces that get stored in the raw TLB
format. For 4.x, we're storing MSAA as just 2x width/height at the
original format.
Patch enables use of short and unsigned short data for texture uploads,
rendering and reading of framebuffers within the restrictions specified
in GL_EXT_texture_norm16 spec.
Patch also enables those 16bit format layout qualifiers listed in
GL_NV_image_formats that depend on EXT_texture_norm16.
v2: expose extension with dummy_true
fix layout qualifier map changes (Ilia Mirkin)
v3: use _mesa_has_EXT_texture_norm16, other fixes
and cleanup (Ilia Mirkin)
v4: fix rest of the issues found
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Acked-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The logic was flawed, since mul(x,y) will be <= 0 (exactly 0) when
the sign is the same but both numbers are sufficiently small
(if the product is smaller than 2^-128).
This could apparently lead to emitting a sufficient amount of
additional bogus vertices to overflow the allocated array for them,
hitting an assertion (still safe with release builds since we just
aborted clipping after the assertion in this case - I'm however unsure
if this is now really no longer possible, so that code stays).
Not sure if the additional vertices could cause other grief, I didn't
see anything wrong even when hitting the assertion.
Essentially, both +-0 are treated as positive (the vertex is considered
to be inside the clip volume for this plane), so integrate the logic
determining different sign into the branch there.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Simplifies the logic when to emit null tris (albeit the reasons why we
have to do this remain unclear).
This is strictly just logic simplification, the behavior doesn't change
at all.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Some analysis suggests that all short immediates are sign-extended. The
insnCanLoad logic already accounted for this, but we could still pick
the wrong form when emitting actual instructions that support both short
and long immediates (with the long form usually having additional
restrictions that insnCanLoad should be aware of).
This also reverses a bunch of commits that had previously "worked
around" this issue in various emitters:
9c63224540: gm107/ir: make use of ADD32I for all immediates
83a4f28dc2: gm107/ir: make use of LOP32I for all immediates
b84c97587b: gm107/ir: make use of IMUL32I for all immediates
d30768025a: gk110/ir: make use of IMUL32I for all immediates
as well as the original import for UMUL in the nvc0 emitter.
Reported-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Tested-by: Karol Herbst <kherbst@redhat.com>
When draw buffers are changed on a bound framebuffer, DrawBufferAllocate()
hook should be called. However, it is missing in update_framebuffer with
window-system framebuffer, in which FB's draw buffer state should match
context state, potentially resulting in a change.
Note: This is needed because gallium delays creating the front buffer,
i965 works fine without this change.
V2 (Timothy Arceri):
- Rebased on merged/simplified DrawBuffer driver function
- Move DrawBuffer call outside fb->ColorDrawBuffer[0] !=
ctx->Color.DrawBuffer[0] check to make piglit pass.
v3 (Timothy Arceri):
- Call new DrawBuffaerAllocate() driver function.
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de> (v2)
Reviewed-by: Brian Paul <brianp@vmware.com> (v2)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99116
Unlike some of the classic drivers the st was only using DrawBuffer()
to allocated some buffers on-demand. Creating a separate function
will allow us to call it from update_framebuffer() in the following
patch without regressing some of the older classic drivers.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Because I clearly wasn't thinking and clearly didn't do a good job
testing. Sigh
Fixes: c5a97d658e
("meson: fix builds against LLVM built without rtti")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This option type is nice since it involves less converting strings into
lists, and because it validates the values that are provided.
v2: - Set with_any_vk to true if any vulkan driver is built (Eric)
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Building without rtti is a frought with peril, but it's something that
autotools supports so we need to support it too.
Since we've moved to version 0.44 as a whole we can use the meson
functionality for accessing random llvm-config options we can check for
rtti and add -fno-rtti to all C++ code accordingly.
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
meson has gotten pretty smart about tracking C and C++ dependencies
(internal and external), and using the right linker. This wasn't always
the case and we created empty c++ files to force the use of the c++
linker. We don't need that any more.
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
meson used to get grumpy if the sources list was empty, even when using
--whole-archive (link_whole). In more recent versions that's not true,
so remove the workaround.
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
In more modern versions of meson a custom_target returns an index-able
object. This allows us to create accurate dependency models for targets
that rely only on the header and not on the code from anv_entrypoints.
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
We have already required 0.44 for building clover and swr, so it was
already partially required. This just makes it required across the board
instead of just for clover and swr.
There is a bug in 0.44 which makes it impossible to build mesa in some
configurations, so require 0.44.1 which fixes this.
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This one's completely my fault, I didn't do good enough testing after
rebasing and this got missed.
Fixes: d28c246501
("meson: build graw tests")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Since we have an option to turn test building on and off, we should
honor that.
Fixes: 34cb4d0ebc
("meson: build tests for gallium mesa state tracker")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Since mesa_classic is build-on-demand the tests will create a demand and
add a bunch of extra compilation.
Fixes: 43a6e84927
("meson: build mesa test.")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
The paths which sample with the clear color are now using a getter which
performs the sRGB decode needed to enable this fast clear.
This path can be exercised by fast-clearing a texture, then performing
an operation which requires sRGB decoding. Test coverage for this
feature is provided with the following tests:
* Shader texture calls:
- spec@ext_texture_srgb@tex-srgb
* Shader texelfetch calls:
- spec@arb_framebuffer_srgb@fbo-fast-clear
- spec@arb_framebuffer_srgb@msaa-fast-clear
* Blending:
- spec@arb_framebuffer_srgb@arb_framebuffer_srgb-fast-clear-blend
* Blitting:
- spec@arb_framebuffer_srgb@blit texture srgb msaa enabled clear
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
It returns both the inline clear color and a clear address which points
to the indirect clear color buffer (or NULL if unused/non-existent).
This getter allows CNL to sample from fast-cleared sRGB textures
correctly by doing the needed sRGB-decode on the clear color (inline)
and making the indirect clear color buffer unused.
v2 (Rafael):
* Have a more detailed commit message.
* Add a comment on the sRGB conversion process.
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We want to add and use a getter that turns off the indirect path by
returning zero for the clear color bo and offset.
v2: Fix usage of "clear address" in commit message (Jason).
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We want to add and use a function that accesses the auxiliary buffer's
clear_color_bo and doesn't care if it has an MCS or HiZ buffer
specifically.
v2 (Jason Ekstrand):
* Drop intel_miptree_get_aux_buffer().
* Mention CCS in the aux_buf field.
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com> (v1)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Make the next patch easier to read by eliminating most of the would-be
duplicate field accesses now.
v2: Update the HiZ comment instead of deleting it (Rafael).
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Imad needs to set a read barrier.
With significant big work groups I was getting wrong results for div u32. Turns
out the issue was with the sched opcodes.
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
src/intel/compiler/brw_schedule_instructions.cpp: In member function ‘virtual void vec4_instruction_scheduler::count_reads_remaining(backend_instruction*)’:
src/intel/compiler/brw_schedule_instructions.cpp:764:72: warning: unused parameter ‘be’ [-Wunused-parameter]
vec4_instruction_scheduler::count_reads_remaining(backend_instruction *be)
^~
src/intel/compiler/brw_schedule_instructions.cpp: In member function ‘virtual void vec4_instruction_scheduler::setup_liveness(cfg_t*)’:
src/intel/compiler/brw_schedule_instructions.cpp:769:51: warning: unused parameter ‘cfg’ [-Wunused-parameter]
vec4_instruction_scheduler::setup_liveness(cfg_t *cfg)
^~~
src/intel/compiler/brw_schedule_instructions.cpp: In member function ‘virtual void vec4_instruction_scheduler::update_register_pressure(backend_instruction*)’:
src/intel/compiler/brw_schedule_instructions.cpp:774:75: warning: unused parameter ‘be’ [-Wunused-parameter]
vec4_instruction_scheduler::update_register_pressure(backend_instruction *be)
^~
src/intel/compiler/brw_schedule_instructions.cpp: In member function ‘virtual int vec4_instruction_scheduler::get_register_pressure_benefit(backend_instruction*)’:
src/intel/compiler/brw_schedule_instructions.cpp:779:80: warning: unused parameter ‘be’ [-Wunused-parameter]
vec4_instruction_scheduler::get_register_pressure_benefit(backend_instruction *be)
^~
src/intel/compiler/brw_schedule_instructions.cpp: In member function ‘virtual int vec4_instruction_scheduler::issue_time(backend_instruction*)’:
src/intel/compiler/brw_schedule_instructions.cpp:1550:61: warning: unused parameter ‘inst’ [-Wunused-parameter]
vec4_instruction_scheduler::issue_time(backend_instruction *inst)
^~~~
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Since all of the fs_generator::generate_foo methods take a fs_inst * as
the first parameter, just remove the name to quiet the compiler.
src/intel/compiler/brw_fs_generator.cpp: In member function ‘void fs_generator::generate_barrier(fs_inst*, brw_reg)’:
src/intel/compiler/brw_fs_generator.cpp:743:41: warning: unused parameter ‘inst’ [-Wunused-parameter]
fs_generator::generate_barrier(fs_inst *inst, struct brw_reg src)
^~~~
src/intel/compiler/brw_fs_generator.cpp: In member function ‘void fs_generator::generate_discard_jump(fs_inst*)’:
src/intel/compiler/brw_fs_generator.cpp:1326:46: warning: unused parameter ‘inst’ [-Wunused-parameter]
fs_generator::generate_discard_jump(fs_inst *inst)
^~~~
src/intel/compiler/brw_fs_generator.cpp: In member function ‘void fs_generator::generate_pack_half_2x16_split(fs_inst*, brw_reg, brw_reg, brw_reg)’:
src/intel/compiler/brw_fs_generator.cpp:1675:54: warning: unused parameter ‘inst’ [-Wunused-parameter]
fs_generator::generate_pack_half_2x16_split(fs_inst *inst,
^~~~
src/intel/compiler/brw_fs_generator.cpp: In member function ‘void fs_generator::generate_shader_time_add(fs_inst*, brw_reg, brw_reg, brw_reg)’:
src/intel/compiler/brw_fs_generator.cpp:1743:49: warning: unused parameter ‘inst’ [-Wunused-parameter]
fs_generator::generate_shader_time_add(fs_inst *inst,
^~~~
src/intel/compiler/brw_vec4_generator.cpp: In function ‘void generate_set_simd4x2_header_gen9(brw_codegen*, brw::vec4_instruction*, brw_reg)’:
src/intel/compiler/brw_vec4_generator.cpp:1412:52: warning: unused parameter ‘inst’ [-Wunused-parameter]
vec4_instruction *inst,
^~~~
src/intel/compiler/brw_vec4_generator.cpp: In function ‘void generate_mov_indirect(brw_codegen*, brw::vec4_instruction*, brw_reg, brw_reg, brw_reg, brw_reg)’:
src/intel/compiler/brw_vec4_generator.cpp:1430:41: warning: unused parameter ‘inst’ [-Wunused-parameter]
vec4_instruction *inst,
^~~~
src/intel/compiler/brw_vec4_generator.cpp:1432:63: warning: unused parameter ‘length’ [-Wunused-parameter]
struct brw_reg indirect, struct brw_reg length)
^~~~~~
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Exposing the visual makes following dEQP tests pass on Android:
dEQP-EGL.functional.wide_color.window_8888_colorspace_srgb
dEQP-EGL.functional.wide_color.pbuffer_8888_colorspace_srgb
Visual is exposed only when DRI_LOADER_CAP_RGBA_ORDERING is set.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Add format definition and required plumbing to create images.
Note that there is no match to drm_fourcc definition, just like
with existing _DRI_IMAGE_FOURCC_SARGB8888.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
If we dump the bitcode for off-line debug purposes, we really want the
pre-optimized bitcode, otherwise it's useless in identifying problems
with IR optimization (if you have a shader which takes an hour to do
IR optimization, it's also nice you don't have to wait that hour...).
Also, print out the function passes for opt which correspond to what
was used for jit compilation (and also the opt level for codegen).
Using opt/llc this way should then pretty much mimic what was done
for jit. (When specifying something like -time-passes
-debug-pass=[Structure|Arguments] (for either opt or llc) that also
gives very useful information in which passes all the time was spent,
and which passes are really run along with the order - llvm will add
passes due to dependencies on its own, and of course -O2 for llc
comes with a ~100 pass list.)
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
LICM is simply too expensive, even though it presumably can help quite
a bit in some cases.
It was definitely cheaper in llvm 3.3, though as far as I can tell with
llvm 3.3 it failed to do anything in most cases. early-cse also actually
seems to cause licm to be able to move things when it previously couldn't,
which causes noticeable compile time increases.
There's more loop passes in llvm, but I'm not sure which ones are helpful,
and I couldn't find anything which would roughly do what the old licm in
llvm 3.3 did, so ditch it.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
This pass is quite cheap, and can simplify the IR quite a bit for our
generated IR.
In particular on a variety of shaders I've found the time saved by
other passes due to the simplified IR more than makes up for the cost
of this pass, and on top of that the end result is actually better.
The only downside I've found is this enables the LICM pass to move some
things out of the main shader loop (in the case I've seen, instanced
vertex fetch (which is constant within the jit shader) plus the derived
instructions in the shader) which it couldn't do before for some reason.
This would actually be desirable but can increase compile time
considerably (licm seems to have considerable cost when it actually can
move things out of loops, due to alias analysis). But blaming early cse
for this seems inappropriate. (Note that the first two sroa / earlycse
passes are similar to what a standard llvm opt -O1/-O2 pipeline would
do, albeit this has some more passes even before but I don't think
they'd do much for us.)
It also in particular helps some crazy shader used for driver
verification (don't ask...) a lot (about factor of 6 faster in compile
time) (due to simplfiying the ir before LICM is run).
While here, also move licm behind simplifycfg. For some shaders there
seems to be very significant compile time gains (we've seen a factor
of 10000 albeit that was a really crazy shader you'd certainly never
see in a real app), beause LICM is quite expensive and there's cases
where running simplifycfg (along with sroa and early-cse) before licm
reduces IR complexity significantly. (I'm not entirely sure if it would
make sense to also run it afterwards.)
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
GLSL 4.6 spec describes hex constant as:
hexadecimal-constant:
0x hexadecimal-digit
0X hexadecimal-digit
hexadecimal-constant hexadecimal-digit
Right now if you have a shader with the following structure:
#if 0X1 // or any hex number with the 0X prefix
// some code
#endif
the code between #if and #endif gets removed because the checking is performed
only for "0x" prefix which results in strtoll being called with the base 8 and
after encountering the 'X' char the strtoll returns 0. Letting strtoll detect
the base makes this limitation go away and also makes code easier to read.
From the strtoll Linux man page:
"If base is zero or 16, the string may then include a "0x" prefix, and the
number will be read in base 16; otherwise, a zero base is taken as 10 (decimal)
unless the next character is '0', in which case it is taken as 8 (octal)."
This matches the behaviour in the GLSL spec.
This patch also adds a test for uppercase hex prefix.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This follows what radeonsi does.
Ported from radeonsi:
radeonsi: emit PA_SC_RASTER_CONFIG_1 only once
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
We can just unreachable here, this aligns with radv code, makes
it easier to move to common code.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Missed this on initial radeonsi port, we shouldn't use this value
on gfx9, but also in gfx8 only for when we have a geom shader.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
They are send messages and this makes size_read() and mlen agree. For
both of these opcodes, the payload is just a dummy so mlen == 1 and this
should decrease register pressure a bit.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Cc: mesa-stable@lists.freedesktop.org
This fixes crashes for the following CTS:
dEQP-VK.glsl.texture_functions.query.texturequerylod.*
Cubemaps are the same as 2D arrays.
Fixes: 625dcbbc45 ("amd/common: pass address components individually to
ac_build_image_intrinsic")
Cc: 18.1 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
The combinaison of GPA/MDAPI components expects a particular name &
layout for their pipeline statistics query.
v2: Limit the query GPA/MDAPI statistics to gen7->9 (Lionel)
v3: Add curly braces (Ken)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The INTEL_performance_query extension provides a list of queries that
a user can select to monitor a particular workload. Each query reports
different sets of counters (roughly looking at different parts of the
hardware, i.e. caches/fixed functions/etc...).
Each query has an associated configuration that we need to program
into the hardware before using the query. Up to now, we provided
predefined queries. This change allows the user to build its own query
(and associated configuration) externally, and have the i965 driver
use that configuration through a new query named :
Intel_Raw_Hardware_Counters_Set_0_Query
When this query is selected, the i965 driver will report raw counters
deltas (meaning their values need to be interpreted by the user, as
opposed to existing queries that provide human readable values).
This change is also useful for debug purposes for building new
pre-defined queries and verifying the underlying numbers make sense
before writing equations for user readable output.
This change's purpose is also to enable GPA. GPA uses a library called
MDAPI that processes raw counter data. MDAPI expects raw data to have
a certain layout (per generation which is a bit unfortunate...). This
change also embeds the expected data layouts.
v2: Enable raw queries on gen 7->11, v1 had 7->9 (Lionel)
v3: Don't assert on cherryview for gen7... (Ken)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2: Add comment breaking down where the frequency values come from (Ken)
v3: More documentation (Ken/Lionel)
Adjust clock ratio multiplier to reflect the divider's behavior (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This register contains the current/previous frequency of the GT, it's
one of the value GPA would like to have as part of their queries.
v2: Don't use this register on baytrail/cherryview (Ken)
Use GET_FIELD() macro (Ken)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We would like to reuse a number of the functions and structures in
another file in a future commit.
We also move the previous content of brw_performance_query.h into
brw_performance_query_metrics.h to be included by generated metrics
files.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Originally the "each" variable was just a part of the "drivers"
variable. It's not anymore so it's a bit ambiguous.
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
This fixes -Ddri-drivers-path, -Dvdpau-libs-path, etc. with DESTDIR when
those paths are absolute. Currently due to the way python's os.path.join
handles absolute paths these will ignore DESTDIR, which is bad. This
fixes them to be relative to DESTDIR if that is set.
Fixes: 3218056e0e
("meson: Build i965 and dri stack")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
We seem to use progress for two cases:
1) When we lowered some returns.
2) When we remove unreachable code.
If just case 2 happens we assert as state->return_flag has not
been allocated yet, but we are still trying to do insert all
predicates based on it.
This splits the concerns. We only use progress internally for case 1
and then keep track of 2 in a separate variable to indicate progress
in the return value of the pass.
This is slightly better than transforming the assert into
if (!state->return_flag) return, as the solution in this patch avoids
inserting predicates even if some other part of the might need them.
Fixes: 6e22ad6edc "nir: return early when lowering a return at the end of a function"
CC: 18.1 <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106174
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
If an EGLSurface is created, made current and destroyed, and then a second
EGLSurface is created. Then the second malloc in driCreateNewDrawable may
return the same pointer address the first surface's drawable had.
Consequently, when dri_make_current later tries to determine if it should
update the texture_stamp it compares the surface's drawable pointer against
the drawable in the last call to dri_make_current and assumes it's the same
surface (which it isn't).
When texture_stamp is left unset, then dri_st_framebuffer_validate thinks
it has already called update_drawable_info for that drawable, leaving it
unvalidated and this is when bad things starts to happen. In my case it
manifested itself by the width and height of the surface being unset.
This is fixed this by setting the pointer to NULL before freeing the
surface.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106126
Signed-off-by: Johan Klokkhammer Helsing <johan.helsing@qt.io>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Cc: 18.0 18.1 <mesa-stable@lists.freedesktop.org>
For nv50 we coalesce the srcs and defs into a single node. As such, we
can end up with impossible constraints if the source is referenced
after the tex operation (which, due to the coalescing of values, will
have overwritten it).
This logic already exists for inserting moves for MERGE/UNION sources.
It's the exact same idea here, so leverage that code, which also
includes a few optimizations around not extending live ranges
unnecessarily.
Fixes tests/spec/glsl-1.30/execution/fs-textureSize-components.shader_test
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
If users are running mesa under old version of qemu or have turned off
GL at runtime, virtio gpu driver actually doesn't work. Adds a detection
here so mesa can fall back to software rendering.
v2:
- move detection from loader to virgl (Ilia, Emil)
Signed-off-by: Lepton Wu <lepton@chromium.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
The copr repo from che was using LTO and he reported radv broke
recently with it. When testing with lto builds here I noticed
that we weren't seeing any instance extensions reported.
It appears LTO was treating the const without extern as an empty
struct, this is possibly a gcc bug, but we can work around it
just by marking these with extern.
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
These were getting mapped off into outer space, which would cause nv50
and nvc0 to clip the primitives (as depth_clip was enabled).
These drivers are configured to clip everything outside the [0, 1]
range, even though the hardware supports other view settings.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
This helps with the PostRALoadPropagation pass moving long immediates into
FMA/MAD instructions.
changes in shader-db:
total instructions in shared programs : 5894114 -> 5886074 (-0.14%)
total gprs used in shared programs : 666558 -> 666563 (0.00%)
total shared used in shared programs : 520416 -> 520416 (0.00%)
total local used in shared programs : 53524 -> 53524 (0.00%)
total bytes used in shared programs : 54006744 -> 53932472 (-0.14%)
local shared gpr inst bytes
helped 0 0 2 4192 4192
hurt 0 0 7 9 9
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
[imirkin: minor edits to separate nv50 and nvc0+ cases]
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
This was done a while ago but never marked on features.txt. Note that
this is only supported on GM200+.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
This was introduced in commit 8f848ada8a
but not added to the sources list, which is necessary for it to be
included in release tarballs.
Fixes: 8f848ada8a
("swr/rast: Start refactoring of builder/packetizer.")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This is needed to provide vk_android_native_buffer.h for vk_enum_to_str.
v2: - remove accidentally included changes
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
We're going to combine ::mcs_buf and ::hiz_buf in later commits. Once
that happens, this function no longer make sense.
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Free the clear_color_bo in addition to freeing the
intel_miptree_aux_buffer which holds the reference to it.
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
memcmp returns 0 when both swizzles are the same, which means we don't
need any hardware swizzling. texture_format_needs_swiz should return
true when the return value of the memcmp is non-zero.
Fixes: 751ae6afbe ("etnaviv: add support for swizzled texture formats")
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Wladimir J. van der Laan <laanwj@gmail.com>
For subpass attachments we need one more coordinate with
the layer, so make them array types.
This fixes a bunch of CTS fails with RADV.
Fixes: 24fb3e6aa1 ("ac/nir: use ac_build_image_opcode for image intrinsics")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The SI family doesn't support chaining which means the maximum
size in dwords per CS is limited. When that limit was reached
we failed to submit the CS and the application crashed.
This patch allows to submit up to 4 IBs which is currently the
limit, but recent amdgpu supports more than that.
Please note that we can reach the limit of 4 IBs per submit
but currently we can't improve that. The only solution is to
upgrade libdrm. That will be improved later but for now this
should fix crashes on SI or when using RADV_DEBUG=noibs.
Fixes: 36cb5508e8 ("radv/winsys: Fail early on overgrown cs.")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105775
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
We can't use any of the existing implementations in u_debug_stack.
Android technically has libunwind, but it's been modified to the point
where it no longer compiles with the Mesa usage. The library is also
not meant to be referenced by vendor libraries. The officially sanctioned
way of obtaining backtraces is through the Android own libbacktrace, a
C++ library. Access it through a separate C++ source file on Android only.
Signed-off-by: Stefan Schake <stschake@gmail.com>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
The fallback path for no libunwind ends up being stubs for Android.
Don't compile them in so we can provide our own implementation.
Signed-off-by: Stefan Schake <stschake@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Ported from RadeonSI.
Local BOs ignore BO priorities, and we don't need those on APUs.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Maintaining two different paths is annoying but this gets
rid of the performance regression introduced by the global
BO list.
We might find a better solution in the future, but for now
just keeps two paths.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
In order to reduce a performance regression introduced by
4b13fe55a4 ("radv: Keep a global BO list for VkMemory."),
we are going to maintain two different paths.
One when VK_EXT_descriptor_indexing is enabled by the
application because we need to have a global BO list, and
one (the old one) when it's not enabled.
With Talos on Polaris, the global BO list reduces performance
by 10% which is too much for me.
This reverts commit ab6cadd3ec.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
All operations with offset_reg at do_vector_read are done
with UD type. So copy propagation was not working through
the generated MOVs:
mov(8) vgrf9:UD, vgrf7:D
This change allows removing the MOV generated for reading the
first components for 16-bit and 64-bit ssbo reads with
non-constant offsets.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
The LLVM instruction returns { i32, i1 }, where the i1 indicates success.
We're only interested in the first part, which is the loaded value.
Fixes dEQP-GLES31.functional.compute.shared_var.atomic.compswap.*
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
It looks as if the structure fields array is fully initialized below,
but in fact at least gcc in debug builds will not actually overwrite
the unused bits of bit fields.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
From CL 1.2 Section 5.2.1:
CL_INVALID_VALUE if buffer was created with CL_MEM_HOST_WRITE_ONLY and
flags specify CL_MEM_HOST_READ_ONLY , or if buffer was created with
CL_MEM_HOST_READ_ONLY and flags specify CL_MEM_HOST_WRITE_ONLY , or if
buffer was created with CL_MEM_HOST_NO_ACCESS and flags specify
CL_MEM_HOST_READ_ONLY or CL_MEM_HOST_WRITE_ONLY .
Fixes CL 1.2 CTS test/api get_buffer_info
v2: Correct host_access_flags check (Francisco)
Signed-off-by: Aaron Watry <awatry@gmail.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
base_vertex will be zero for non-indexed calls and in that case we
need vertex_id to be offset by the ‘first’ parameter instead. That is
what we get with first_vertex. This is true for both GL and Vulkan.
The freedreno driver is also setting vertex_id_zero_based on
nir_options. In order to avoid breakage this patch switches the
relevant code to handle SYSTEM_VALUE_FIRST_VERTEX so that it can
retain the same behavior.
v2: change a3xx/fd3_emit.c and a4xx/fd4_emit.c from
SYSTEM_VALUE_BASE_VERTEX to SYSTEM_VALUE_FIRST_VERTEX (Kenneth).
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>
The base vertex in Vulkan is different from GL in that for non-indexed
primitives the value is taken from the firstVertex parameter instead
of being set to zero. This coincides with the new SYSTEM_VALUE_FIRST_VERTEX
instead of BASE_VERTEX.
v2 (idr): Add comment describing why SYSTEM_VALUE_FIRST_VERTEX is used
for SpvBuiltInBaseVertex. Suggested by Jason.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> [v1]
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Until we set gl_BaseVertex to zero for non-indexed draw calls
both have an identical value.
The Vertex Elements are kept like that:
* VE 1: <BaseVertex/firstvertex, BaseInstance, VertexID, InstanceID>
* VE 2: <Draw ID, 0, 0, 0>
v2 (idr): Mark nir_intrinsic_load_first_vertex as "unreachable" in
emit_system_values_block and fs_visitor::nir_emit_vs_intrinsic.
This VS system value will contain the value passed as <basevertex> for
indexed draw calls or the value passed as <first> for non-indexed draw
calls. It can be used to calculate the gl_VertexID as
SYSTEM_VALUE_VERTEX_ID_ZERO_BASE plus SYSTEM_VALUE_FIRST_VERTEX.
From the OpenGL 4.6 spec, 10.4 "Drawing Commands Using Vertex Arrays":
- Page 352:
"The index of any element transferred to the GL by DrawArraysOneInstance
is referred to as its vertex ID, and may be read by a vertex shader as
gl_VertexID. The vertex ID of the ith element transferred is first +
i."
- Page 355:
"The index of any element transferred to the GL by
DrawElementsOneInstance is referred to as its vertex ID, and may be read
by a vertex shader as gl_VertexID. The vertex ID of the ith element
transferred is the sum of basevertex and the value stored in the
currently bound element array buffer at offset indices + i."
Currently the gl_VertexID calculation uses SYSTEM_VALUE_BASE_VERTEX but
this will have to change when the value of gl_BaseVertex is
fixed. Currently its value is broken for non-indexed draw calls because
it must be zero but we are setting it to <first>.
v2: use SYSTEM_VALUE_FIRST_VERTEX as name for the value, instead of
SYSTEM_VALUE_BASE_VERTEX_ID (Kenneth).
v3 (idr): Rebase on Rob Clark converting nir_intrinsics.h to be
generated. Reformat commit message to 72 columns.
Reviewed-by: Neil Roberts <nroberts@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
I have seen a few applications and games do the dynamic buffer bounds incorrectly, this
make it easier to work around, e.g. for debugging.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
When advertizing this extension, egl_dri2 uses the DRI2_RENDERER_QUERY
extension to query whether an sRGB format is supported. That extension will
query our driver with the BIND flag PIPE_BIND_RENDER_TARGET rather than
PIPE_BIND_DISPLAY_TARGET which is used when building the configs.
We only return the correct value for PIPE_BIND_DISPLAY_TARGET.
The inconsistency causes EGL to crash at surface initialization if sRGB is
not supported. Fix this by supporting both bind flags.
Testing done:
piglit egl_gl_colorspace srgb
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Include llvm/Transforms/Utils.h with the newest LLVM 7
v2: Include with " " rather than < > (Vinson Lee)
v3: Use LLVM_VERSION_MAJOR rather than HAVE_LLVM (George Kyriazis)
Signed-of-by: Mike Lothian <mike@fireburn.co.uk>
Tested-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-By: George Kyriazis <george.kyriazis@intel.com>
This can be enabled with RADV_PERFTEST=dccmsaa.
DCC for MSAA textures is actually not as easy to implement. It
looks like there is some corner cases. I will improve support
incrementally.
Vega support, as well as Polaris improvements, will be added later.
No CTS changes on Polaris using RADV_DEBUG=zerovram and
RADV_PERFTEST=dccmsaa.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Multisampled source images (ie. color attachments) can be now
DCC compressed, so the driver needs to perform a DCC decompression
pass before resolving
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
CMASK is required because it should be cleared to
0xCCCCCCCC for MSAA textures.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
When DCC is enabled with MSAA textures, CMASK should be
cleared to 0xCCCCCCCC.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This fixes some random CTS failures:
dEQP-VK.renderpass.multisample.*.
Performing a fast-clear eliminate is still useless, but it
seems that we need to sync.
Found while running CTS with RADV_DEBUG=zerovram.
Fixes: 56a171a499 ("radv: don't fast-clear eliminate after resolving a subpass with compute")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Might be useful for debugging purposes, especially when we
want to replace a shader on the fly.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The continue means we do alignment differently than during creation,
making the buffer smaller than expected.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Previously we did not care about havin the set storage in order,
but for variable descriptor count we want the highest binding
at the end of the storage.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
With update after bind we can't attach bo's to the command buffer
from the descriptor set anymore, so we have to have a global BO
list.
I am somewhat surprised this works really well even though we have
implicit synchronization in the WSI based on the bo list associations
and with the new behavior every command buffer is associated with
every swapchain image. But I could not find slowdowns in games because
of it.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
brw_bo_alloc may round up our allocation size to the next bucket size.
In this case, we would malloc a shadow buffer that was the original
intended size, but use bo->size (the larger size) for all of our checks.
This could cause us to run off the end of the shadow buffer.
v2: Actually use the new BO size (caught by Lionel)
Reported-by: James Xiong <james.xiong@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: c7dcee58b5 (i965: Avoid problems from referencing orphaned BOs after growing.)
This packet causes the no-op IB detection to fail, so the IB is always
submitted. Also fix the no-op IB detection by moving the begin call.
Cc: 18.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This only enables the null and xlib target, so no windows support yet.
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
v2: - gate unit tests on swrast being enabled (Eric A)
v3: - rebase on libtrace being merged with gallium auxiliary
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net> (v2)
This ports glcpp-test.sh and glcpp-test-cr-lf.sh to a python script that
accepts arguments for each line ending type. This should allow for
better reporting to users.
v2: - Use $PYTHON2 to be consistent with other tests in mesa
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This patch converts optimization-test.sh to python, in this process it
removes external shell dependencies including diff. It replaces the
python script that generates shell scripts with a python library that
generates test cases and runs them using subprocess.
v2: - use $PYTHON2 to be consistent with other tests in mesa
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
This reimplements the test in python with a shell script wrapper that
allows autotools to continue to run the test without realizing that
anything has changed.
Using python has two advantages, first it's portable so this test can be
run on windows as well as Linux since it just requires python, no more
diff, pwd or sh. It's also no longer tied to autotools implementation
details, like the environment variables $srcdir and $abs_builddir,
though the autotools shell wrapper still uses those, which makes it
possible to run the test in meson.
v2: - Use $PYTHON2 in script to be consistent with other scripts in mesa
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Add per-worker thread private data to all shader calls
Add per-worker sampler cache and jit context
Add late LoadTexel JIT support
Add per-worker-thread Sampler / LoadTexel JIT
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Fix issue where temporary allocas were getting hoisted to function entry
unnecessarily. We now explicitly mark temporary allocas and skip hoisting
during the hoist pass. Shuold reduce stack usage.
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Needed because some FP paths (namely stipple) use gather intrinsics
that now need to be lowered to x86.
v2: fix typo in commit message
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Enable generalized fetch jit with 8 or 16 wide SIMD target. Still some
work needed to remove some simd8 double pumping for 16-wide target.
Also removed unused non-gather load vertices path.
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Abstract usage scenarios for memory accesses into builder_gfx_mem.
Builder_gfx_mem will convert gfxptr_t from 64-bit int to regular pointer
types for use by builder_mem.
v2: reworded commit message; renamed enum more appropriately
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Some more work to do before we can support simultaneous 8-wide and
16-wide and remove the VGATHERPS_16 version.
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Small cleanup. Remove convenience types from JitManager and standardize
on the Builder's convenience types.
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Add support for providing an emulation callback function for arch/width
combinations that don't map cleanly to an x86 intrinsic.
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Move x86 intrinsic lowering to a separate pass. Builder now instantiates
generic intrinsics for features not supported by llvm. The separate x86
lowering pass is responsible for lowering to valid x86 for the target
SIMD architecture. Currently it's a port of existing code to get it
up and running quickly. Will eventually support optimized x86 for AVX,
AVX2 and AVX512.
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Removed preprocessor defines from structures passed to LLVM jitted code.
The python scripts do not understand the preprocessor defines and ignores
them. So for fields that are compiled out due to a preprocessor define
the LLVM script accounts for them anyway because it doesn't know what
the defines are set to. The sanitize defines for open source are fine
in that they're safely used.
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Added a SWR_SHADER_STATS structure which is passed to each shader. The
stats pass will instrument the shader to populate this.
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Fix slow permutes in PA tri lists under SIMD16 emulation on AVX
Added missing permute (interlane, immediate) to SIMDLIB
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Finish up the remaining explicit intrinsic uses. At this point all
explicit Intrinsic::getDeclaration() usage has been replaced with auto
generated macros generated with gen_llvm_ir_macros.py. Going forward,
make sure to only use the intrinsics here, adding new ones as needed.
Next step is to remove all references to x86 intrinsics to keep the
builder target-independent. Any x86 lowering will be handled by a
separate pass.
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Add stats for degenerate and backfacing primitive counts
Wire archrast stats for alpha blend and alpha test.
pass value to jitter, upon return have archrast event increment a value
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Stuff parameters into a blend context struct before passing down through
the PFN_BLEND_JIT_FUNC function pointer. Needed for stat changes.
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Add assert for correct usage of memory accesses
v2: reworded commit message; renamed enum more appropriately
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
This is for parity with autotools. It names the library
libMesaOpenCL.so.1.0.0 and points mesa.icd to the .1 symlink.
opencl_version now matches configure.ac's OPENCL_VERSION.
Signed-off-by: Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>
Tested-By: Aaron Watry <awatry@gmail.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
The SPIR-V spec doesn’t specify a size requirement for these and the
equivalent functions in the GLSL spec have explicit alternatives for
doubles. Refract is a little bit more complicated due to the fact that
the final argument is always supposed to be a scalar 32- or 16- bit
float regardless of the other operands. However in practice it seems
there is a bug in glslang that makes it convert the argument to 64-bit
if you actually try to pass it a 32-bit value while the other
arguments are 64-bit. This adds an optional conversion of the final
argument in order to support any type.
These have been tested against the automatically generated tests of
glsl-4.00/execution/built-in-functions using the ARB_gl_spirv branch
which tests it with quite a large range of combinations.
The issue with glslang has been filed here:
https://github.com/KhronosGroup/glslang/issues/1279
v2: Convert the eta operand of Refract from any size in order to make
it eventually cope with 16-bit floats.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The only change neccessary is to change the type of the constant used
to compare against.
This has been tested against the arb_gpu_shader_fp64/execution/
fs-isinf-dvec tests using the ARB_gl_spirv branch.
v2: Use nir_imm_floatN_t for the constant.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
There is an existing macro that is used to choose between either a
float or a double immediate constant based on the bit size of the
first operand to the builtin. This is now changed to use the new
nir_imm_floatN_t helper function to reduce the number of places that
make this decision.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This lets you easily build float immediates just given the bit size.
If we have this single place here to handle this then it will be
easier to add support for 16-bit floats later.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Otherwise we create unused conditional return flags and things
get unnecessarily ugly fast when lowering nested functions.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The extra params we unused by the drivers that used DrawBuffers.
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
fixes warnings like this:
[184/1137] Compiling C++ object 'src/compiler/glsl/glsl@sta/lower_jumps.cpp.o'.
In file included from ../src/mesa/main/mtypes.h:48,
from ../src/compiler/glsl_types.h:149,
from ../src/compiler/glsl/lower_jumps.cpp:59:
../src/compiler/glsl/lower_jumps.cpp: In member function '{anonymous}::block_record {anonymous}::ir_lower_jumps_visitor::visit_block(exec_list*)':
../src/compiler/glsl/list.h:650:17: warning: unnecessary parentheses in declaration of 'node' [-Wparentheses]
for (__type *(__inst) = (__type *)(__list)->head_sentinel.next; \
^
../src/compiler/glsl/lower_jumps.cpp:510:7: note: in expansion of macro 'foreach_in_list'
foreach_in_list(ir_instruction, node, list) {
^~~~~~~~~~~~~~~
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
A couple spots were missed for handling of the new INT8/UINT8 base type.
Also de-duplicate get_base_type().. get_scalar_type() had nearly the
same switch statement, with the exception that anything with base_type
that was not scalar would return error_type. So just handle that one
special case in get_scalar_type().
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(This patch doesn't enable the behavior. It will be enabled in a later
commit.)
Draw calls from multiple IBs can be executed in parallel.
v2: do emit partial flushes on SI
v3: invalidate all shader caches at the beginning of IBs
v4: don't call si_emit_cache_flush in si_flush_gfx_cs if not needed,
only do this for flushes invoked internally
v5: empty IBs should wait for idle if the flush requires it
v6: split the commit
If we artificially limit the number of draw calls per IB to 5, we'll get
a lot more IBs, leading to a lot more partial flushes. Let's see how
the removal of partial flushes changes GPU utilization in that scenario:
With partial flushes (time busy):
CP: 99%
SPI: 86%
CB: 73:
Without partial flushes (time busy):
CP: 99%
SPI: 93%
CB: 81%
Tested-by: Benedikt Schemmer <ben@besd.de>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
ir_binop_gequal needs to be converted to nir_op_sge when native integers
are not supported in the driver.
Otherwise it becomes no different than ir_binop_less after the
conversion.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
That looks useless, and I think radv_handle_image_transition()
will do a fast-clear eliminate because it's called after the
resolve.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Niuwenhuizen <bas@basnieuwenhuizen.nl>
In order to separate initialization from decompression. In the
future, that will allow us to init DCC/FMASK/CMASK in one shot.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Niuwenhuizen <bas@basnieuwenhuizen.nl>
Mostly because DCC implies a fast-clear eliminate and we
should be able to skip some DCC decompressions by setting
a predicate like for CMASK and FMASK.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Niuwenhuizen <bas@basnieuwenhuizen.nl>
When decompressing DCC we don't enable it, so it's useless
to disable it. This reduces the number of prediction packets
sent to the GPU when performing color decompression passes.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Niuwenhuizen <bas@basnieuwenhuizen.nl>
To fix the MSVC build. The build broke because we started to compile
the ddebug code on Windows after the mtypes.h changes. Building ddebug
caused us to also use the u_network.c code for the first time.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Don't include Unix headers or use Unix functions when building with MSVC.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
THIS is a macro in one of the MSVC header files. It's also a token
in the GLSL lexer. This causes a compilation failure with MSVC.
This issue seems to be newly exposed after the recent mtypes.h removal
patches.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Neha Bhende <bhenden@vmware.com>
The recent mtypes.h removal patches seems to have exposed a MSVC
issue where 'interface' is defined as a macro in an MSVC header file.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Neha Bhende <bhenden@vmware.com>
snprintf is a macro in the MSVC stdio.h header and we needed to
include that header before imports.h where we also defined an
snprintf macro. Otherwise, the MSVC build would fail. The recent
mtypes.h removal patches seems to have exposed this issue.
This patch simply removes our snprintf macro and replaces one use
of it in teximage.c with _mesa_snprintf(). There are other calls
to snprintf() in DRI drivers, but none of them are built on Windows.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Neha Bhende <bhenden@vmware.com>
We're not counting correctly with depth & stencil images.
Additionally we need to move an assert that is meant just for color
attachments.
v2: Move an assert() (Reported by Craig)
Change aspect mask checks (Francesco)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: a62a979335 ("anv: enable multiple planes per image/imageView")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105994
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Add this prefix to the env var: "simple," For example:
GALLIUM_HUD=simple,fps
The X coordinates are the same, but the Y coordinates are different, because
there is only text.
'+' happens to behave the same as "\n".
',' happens to behave the same as "\n\n".
so that the draw is started as soon as possible.
v2: only prefetch the API VS and VBO descriptors
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
This code was written with the constant engine in mind.
We can simplify it now.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Current code is returning an INVALID_OPERATION when trying to use
getTextureImage() on a level that has not been explicitly defined.
That is, we define a mipmapped Texture2D with 3 levels, and try to use
GetTextureImage() for the 4th levels, and INVALID_OPERATION is returned.
Nevertheless, such case is not listed as an error in OpenGL 4.6 spec,
section 8.11.4 ("Texture Image Queries"), where all the case errors for
this function are defined. So it seems this is a valid operation.
On the other hand, in section 8.22 ("Texture State and Proxy State") it
states:
"Each initial texture image is null. It has zero width, height, and
depth, internal format RGBA, or R8 for buffer textures, component
sizes set to zero and component types set to NONE, the compressed
flag set to FALSE, a zero compressed size, and the bound buffer
object name is zero."
We can assume that we are reading this initialized empty image when
calling GetTextureImage() with a non defined level.
With this assumption, we will reach one of the other error cases defined
for the functions. In the end this means that we would end up returning
INVALID_VALUE to the caller.
This fixes arb_get_texture_sub_image piglit tests.
v2: just return INVALID_VALUE if there is no defined level (Iago)
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
According to OpenGL 4.6 spec, section 8.11.4 ("Texture Image Queries"),
relative to errors for GetTexImage, GetTextureImage, and GetnTexImage:
"An INVALID_OPERATION error is generated by GetTextureImage if the
effective target is TEXTURE_CUBE_MAP or TEXTURE_CUBE_MAP_ARRAY, and
the texture object is not cube complete or cube array complete,
respectively."
This fixes arb_get_texture_sub_image piglit tests.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
According to OpenGL 4.6 spec, section 8.11.4 ("Texture Image Queries"),
relative to errors for GetTextureSubImage() function:
"An INVALID_VALUE error is generated if the effective target is
TEXTURE_1D and either yoffset is not zero, or height is not one.
An INVALID_VALUE error is generated if the effective target is
TEXTURE_1D, TEXTURE_1D_ARRAY, TEXTURE_2D or TEXTURE_RECTANGLE, and
either zoffset is not zero, or depth is not one."
The commit fixes the check for height and depth.
This fixes arb_get_texture_sub_image piglit tests.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
- remove mtypes.h from most header files
- add main/menums.h for often used definitions
- remove main/core.h
v2: fix radv build
Reviewed-by: Brian Paul <brianp@vmware.com>
Pretty straight forward, just pass the divisors through the shader
key and then do a LLVM divide.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
For dcn1 && < 64 bpp displayable surfaces, addrlib only accepts
S swizzles.
At the same time addrlib prefers D swizzles is allowed, so we can
just allow S swizzles as fallback.
Fixes: b64b712558 "ac/surface/gfx9: request desired micro tile mode explicitly"
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This is the ABI I'm hoping to stabilize for merging the driver. seqnos
are eliminated, which allows for the GPU scheduler to task-switch between
DRM fds even after submission to the kernel. In/out sync objects are
introduced, to allow the Android fencing extension (not yet implemented,
but should be trivial), and to also allow the driver to tell the kernel to
not start a bin until a previous render is complete.
This should avoid mistakes with not flushing as we change the series of
loads. Already, it fixes a hopefully unreachable case where we were
emitting just the TILE_COORDINATES and not the dummy store that needs to
go with it.
This was dying in the simulator on
GTF-GLES3.gtf.GL3Tests.packed_depth_stencil.packed_depth_stencil_blit.
We'll need to do basically the same thing as Z32F/S8 does in the MSAA
Z24S8 case.
The v3dX(get_internal_type_bpp_for_output_format)() call only handles
color output formats (which overlap in enum numbers with depth output
formats), so for depth we just need to take the normal cpp times the
number of samples.
The current FW has restricted the size to the worse case,
and the new dynamic dpb buffer support is on the way from
firmware side, we will change accordingly.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
num_dcc_levels means that DCC is supported, but this doesn't
mean that it's enabled by the driver. Instead, we should rely
on radv_image_has_dcc().
This fixes some multisample regressions since 0babc8e5d6
("radv: fix picking the method for resolve subpass") on Vega.
This is because the resolve method changed from HW to FS, but
those fails are totally unexpected, so there might some
differences between Polaris and Vega here.
Fixes: 44fcf58744 ("radv: Disable DCC for GENERAL layout and compute transfer dest.")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This helper shares common code before resolving using either
a fragment or a compute shader.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The compatibility and core tokens were not added until GLSL 1.50,
for GLSL 1.40 just assume all shaders built with a compat profile
are compat shaders.
Fixes rendering issues in Dawn of War II on radeonsi which has
enabled OpenGL 3.1 compat support.
Fixes: a0c8b49284 "mesa: enable OpenGL 3.1 with ARB_compatibility"
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105807
Passing ctx to compressedteximage_only_format was the only use of the
ctx parameter in _mesa_format_no_online_compression, so that parameter
had to go too.
../../SOURCE/master/src/mesa/main/teximage.c: In function ‘compressedteximage_only_format’:
../../SOURCE/master/src/mesa/main/teximage.c:1355:57: warning: unused parameter ‘ctx’ [-Wunused-parameter]
compressedteximage_only_format(const struct gl_context *ctx, GLenum format)
^~~
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
vulkan/genX_blorp_exec.c:69:1: warning: ‘blorp_get_surface_base_address’ defined but not used [-Wunused-function]
blorp_get_surface_base_address(struct blorp_batch *batch)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from vulkan/genX_blorp_exec.c:35:0:
./blorp/blorp_genX_exec.h:1249:1: warning: ‘blorp_emit_memcpy’ defined but not used [-Wunused-function]
blorp_emit_memcpy(struct blorp_batch *batch,
^~~~~~~~~~~~~~~~~
genX_blorp_exec.c:99:1: warning: ‘blorp_get_surface_base_address’ defined but not used [-Wunused-function]
blorp_get_surface_base_address(struct blorp_batch *batch)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from genX_blorp_exec.c:33:0:
../../../../../src/intel/blorp/blorp_genX_exec.h:1249:1: warning: ‘blorp_emit_memcpy’ defined but not used [-Wunused-function]
blorp_emit_memcpy(struct blorp_batch *batch,
^~~~~~~~~~~~~~~~~
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
The matching code doesn't make real use of the return value. The main
function return value is ignored, and while the worker function
propagate its return value, the actual callback never returns false.
v2: Style fixes. (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Only fully-qualified direct derefs, collected in direct_deref_nodes,
are checked for aliasing, so it is already known up front that they
have only array derefs of type direct.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The return value was needed to make use of the old nir_foreach_block
helper, but not needed anymore with the macro version. Then go one
step further and move the foreach directly into the register variable
uses function.
v2: Move foreach to register_variable_uses(). (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
LLVM now emits labels as part of the disassembly string, which is very
useful but breaks the old parsing approach.
Use the semicolon to detect the boundary of instructions instead of going
by line breaks.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This will give us meaningful wave information in the case of a hang where
shaders are still running in an infinite loop.
Note that we call umr multiple times for different sections of the ddebug
hang dump, and so the wave information will not necessarily match up
between sections.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
All the information in vk_android_native_buffer.xml is now in vk.xml.
The only exception is the extension type attribute which we can work
around in the generators while we wait for the XML to be fixed.
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
This replaces some "if (...} { }" with "if (...) continue;" to reduce
nesting depth and makes nir_metadata_preserve conditional on progress
for the given impl.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
According to Marek, not enabling it on Stoney has a significant
negative performance impact. (And I guess this might impact
performance on Raven as well)
The register settings are pretty much copied from radeonsi. I did
not put this in the pipeline as that would make the pipeline more
dependent on the format which mean we would have to have more
pipelines for the meta shaders.
v2: Don't clear RB+ regs if not enabled as the CLEAR_STATE packet
does already.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
However, it only fails when running out of memory. Now, if we
are about to check that, we should be consistent and check
the allocation of the worklist as well.
CID: 1433512
Fixes: edb18564c7 nir: Initial implementation of a nir_instr_worklist
Reviewed-by: Thomas Helland <thomashelland90@gmail.com>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
The source and destination image parameters were swapped.
No CTS changes on Polaris10, but I suspect this might
fix something.
Fixes: 2a04f5481d ("radv/meta: select resolve paths")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This enables the tile swizzle for some cases of the displayable micro mode,
and it also fixes an addrlib assertion failure on Vega.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Dylan has kindly stepped up to help with 18.1.0, while I've taken the
liberty to nominate Andres for 18.2.0 ;-)
As always, people are welcome to swap/adjust where needed.
v2: Add Juan for 18.0.x (Juan)
Cc: Andres Gomez <agomez@igalia.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Acked-by: Dylan Baker <dylan@pnwbakers.com> (v1)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Earlier commit enforced that we'll bail out if the number of terminators
is different than 2. With that in mind, the assert() will never trigger.
Fixes: 56b867395d ("glsl: fix infinite loop caused by bug in loop
unrolling pass")
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Saves about 2% of compile time for F1 2017, as well as reduce code
size of an optimized libvulkan_radeon.so by about 1 KiB.
This still keeps the hashtable, as we also stored blocks in there.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
We don't create variants of the NIR so here we finalise it before
caching to avoid unnecessary processing when restoring it.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This makes it easier to follow the code, and also initialises
dynamic_index which will be useful for adding bindless textures
support.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We neeed to skip the var if its not a uniform here as well as checking
the bindless flag since UBOs can contain bindless samplers.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This sets the LinkShader function for the driver, but for the st we
set it properly with the following call to st_init_program_functions().
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Once we've gotten rid of everything but the main entrypoint, there's no
reason why we should go ahead and lower them all. This is what radv
does and it will make future work easier.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
As we sometimes reset them to -1, -1 does not mean that they are
not written by the secondary command buffer.
Fixes: ad11fc3571 "radv: don't emit unneeded vertex state."
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
At one point this kinda worked (or at least didn't cause problems). But
with deref-instructions it results in dangling deref instructions not
being properly removed.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Not using the macro means no nir_validate in debug builds, resulting in
problems showing up only after later passes.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
So it is more clear about when to use nir_instr_rewrite_src()
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We want to hide the internal details of how the miptree's clear color
is calculated.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The parameters for the compute engine are wrong when using
an E8860 on a big endian machine.
To fix this, convert the contents of struct dispatch_packet
to little endian.
This ensures that get_global_id(0) and similar functions
in the OpenCL code get the correct endian values, and
makes my simple OpenCL program work correctly.
Signed-off-by: Bas Vermeulen <bas@daedalean.ai>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Using mesa OpenCL failed on a big endian PowerPC machine because
si_vgt_param_key is using bitfields and a 32 bit int for an
index into an array.
Fix si_vgt_param_key to work correctly on both little endian
and big endian machines.
Signed-off-by: Bas Vermeulen <bas@daedalean.ai>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
When creating a image from a texture, the image's dri_format is
set to the first plane's format, and used to look up for the
fourcc. e.g. for FOURCC_NV12 texture, the dri_format is set to
__DRI_IMAGE_FORMAT_R8, we end up with a wrong entry in function
intel_lookup_fourcc():
{ __DRI_IMAGE_FOURCC_R8, __DRI_IMAGE_COMPONENTS_R, 1,
{ { 0, 0, 0, __DRI_IMAGE_FORMAT_R8, 1 }, } },
instead of the correct one:
{ __DRI_IMAGE_FOURCC_NV12, __DRI_IMAGE_COMPONENTS_Y_UV, 2,
{ { 0, 0, 0, __DRI_IMAGE_FORMAT_R8, 1 },
{ 1, 1, 1, __DRI_IMAGE_FORMAT_GR88, 2 } } },
as a result, a wrong fourcc __DRI_IMAGE_FOURCC_R8 was returned.
To fix this bug, the image inherits the texture's planar_format that
has the original fourcc; Upon querying, if planar_format is set,
return the saved fourcc; Otherwise fall back to the old way.
v3: add a bug description and "cc mesa-stable" tag (Jason)
remove redundant null pointer check (Tapani)
squash 2 patches into one (James)
v2: fall back to intel_lookup_fourcc() when planar_format is NULL
(Dongwon & Matt Roper)
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Xiong, James <james.xiong@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Since 31d91f019b, the makefile tries to
find the file SConstript.spirv instead of SConscript.spirv which breaks
the make dist command.
Reviewed-by: Brian Paul <brianp@vmware.com>
Forgot one check... Too many mistakes for a simple change.
Fixes: f1d7c16e85 ("radv: fix prefetching compute shaders on CIK and older chips")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
v2:
- Provide a correct explanation on the envvars documentation (Ian).
- Provide a more correct explanation on the function comments (Andres).
v3:
- Homogenize documentation and inline comments (Emil).
- Correct a typo (Emil).
Fixes: 2599b92eb9 ("mesa: allow forcing >=3.1 compatibility contexts
with MESA_GL_VERSION_OVERRIDE")
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ian Romanick <ian.d.romanick@intel.com>
Cc: Eric Engestrom <eric.engestrom@imgtec.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Currently, any driver that does not support the ARB_compatibility
extension will fail on GL3.1 context creation if the application does
not request the forward-compatiblity flag.
Restore the original check which changes mesa_api to API_OPENGL_CORE,
only when:
- GL3.1 is requested, without the forward-compatiblity flag.
- driver does not support ARB_compatibility - as deduced by
max_gl_compat_version.
Fixes: a0c8b49284 ("mesa: enable OpenGL 3.1 with ARB_compatibility")
v2:
- Improve commit log (Emil).
- Provide a correct explanation on the features documentation (Ian).
Cc: Marek Olšák <marek.olsak@amd.com>
Cc: Ian Romanick <ian.d.romanick@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Eric Engestrom <eric.engestrom@imgtec.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This way we won't fail when validating just because we may have a non
overriden core version that is lower than the requested one, even when
the compat version is high enough.
For example, running glcts from VK-GL-CTS with i965, this will
succeed:
$ MESA_GL_VERSION_OVERRIDE=4.6 ./glcts --deqp-case=KHR-GL46.info.vendor
While, this will fail:
$ MESA_GL_VERSION_OVERRIDE=4.6COMPAT ./glcts --deqp-case=KHR-GL46.info.vendor
Fixes: 464c56d3d5 ("dri_util: Use
_mesa_override_gl_version_contextless")
Cc: Ian Romanick <ian.d.romanick@intel.com>
Cc: Tapani Pälli <tapani.palli@intel.com>
Cc: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
... to radv_use_tc_compat_htile_for_image(). This function
name makes more sense to me because we want to know if and
only if TC-compat HTILE should be used.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
If the image has FMASK metadata, the number of samples is > 1
because radv_image_can_enable_fmask() handles that already.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
DCC for MSAA textures are currently unsupported but that will
be used later on.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
They will help for DCC MSAA textures and if we support mipmaps
in the future.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Add needed infrastructure to use performance monitor
requests for queries.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Tested-by: Chris Healy <cphealy@gmail.com>
We only support importing YUV as OES external resources.
This will change in the future, but for now this fixes the
advertised capabilities in eglQueryDmaBufModifiersEXT.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
This adds a helper to check if a pipe format is in YUV color space.
Drivers want to know about this, as YUV mostly needs special handling.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
If a fence is created in between nvc0_hw_end_query and
nvc0_hw_query_fifo_wait, the sequence number in nvc0->screen->fence.bo can
be larger than hq->fence->sequence before the semaphore is created,
resulting in the semaphore never being triggered.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
If the fence has not been emitted, hq->fence->sequence would be zero. This
would result in the semaphore never being triggered, blocking all later
commands in the pushbuf.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
[imirkin: use nouveau_fence_emit instead]
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
All consts are now implicitly 2d (they set .Dimension), so trigger
asserts. Also, the texture offset can't handle any sort of 2d indexing.
While this could be tacked on, this seems unnecessary, just move it off
into a separate temp.
Fixes assertion failure in
tests/spec/arb_gpu_shader5/compiler/builtin-functions/fs-gatherOffset-uniform-offset.frag
Note that this was an issue even before the const-always-2d thing, since
there was no detection of when even a proper second dimension was used,
e.g. for UBO or geom/tess inputs.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Fixes a bunch of new CTS pbo tests that use those as an output format,
which the state tracker converts into buffer image writes.
No part of the driver is ready for BGR10A2. It could probably be enabled
on Maxwell+, but seems unnecessary. This error was introduced when
flipping the displayable bit on those formats, which accidentally also
moved the image bit.
Fixes: e1a70aed10 (nv50,nvc0: mark ABGR format as displayable instead of ARGB format)
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
tgsi_to_nir emits things with arrays as global vars.. and nir->ir3 does
lower_locals_to_regs. But nothing was lowering global to local, which
breaks compiling tgsi shaders
Signed-off-by: Rob Clark <robdclark@gmail.com>
In the old days (0.42.x), when mesa's meson system was written the
recommendation for handling conditional dependencies was to define them
as empty lists. When meson would evaluate the dependencies of a target
it would recursively flatten all of the arguments, and empty lists would
be removed. There are some problems with this, among them that lists and
dependencies have different methods (namely .found()), so the
recommendation changed to use `dependency('', required : false)` for
such cases. This has the advantage of providing a .found() method, so
there is no need to do things like `dep_foo != [] and dep_foo.found()`,
such a dependency should never exist.
I've tested this with 0.42 (the minimum we claim to support) and 0.45.
On 0.45 this removes warnings about comparing unlike types, such as:
meson.build:1337: WARNING: Trying to compare values of different types
(DependencyHolder, list) using !=.
v2: - Use dependency('', required : false) instead of
declare_dependency(), the later will always report that it is
found, which is not what we want.
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
brw_reg::type is "enum brw_reg_type type:4". For whatever reason, GCC
is treating this as an int instead of an enum. As a result, it doesn't
detect missing switch cases and it doesn't detect that flow can get out
of the switch.
This silences the warning:
src/intel/compiler/brw_reg.h: In function ‘bool brw_regs_negative_equal(const brw_reg*, const brw_reg*)’:
src/intel/compiler/brw_reg.h:305:1: warning: control reaches end of non-void function [-Wreturn-type]
}
^
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
In the emit_copies() function, the use of "newv" and "temp" names made
sense when only copies from temporaries to the new variables were
being done. But now there are other calls to copy with other pairings,
and "temp" doesn't always refer to a temporary created in this
pass. Use the names "dest" and "src" instead.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This is unnecessary because we record an error which should
be returned by vkEndCommandBuffer(), and the app shouldn't
submit a command buffer when this happens.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Because the check was moved to radv_emit_prefetch_L2().
Fixes: 4ad7595f35 ("radv: rename radv_emit_prefetch() to radv_emit_prefetch_L2()")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This unnecessary when the precision bit flag is not set, and this
might hurt performance. The Vulkan explains that not setting
VK_QUERY_CONTROL_PRECISE_BIT might be more efficient on some
implementations.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Enable it directly in the preamble, but do not enable line
on Polaris10/11/12 because there is a hw bug.
There is possibly an issue when MSAA is off, but this doesn't
regress any CTS and AMDVLK doesn't have a workaround as well.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
v2 (Jason Ekstrand):
- Return the correct enum values from anv_layout_to_fast_clear_type
v3 (Jason Ekstrand):
- Always return ANV_FAST_CLEAR_NONE and leave doing the right thing for
the patch which adds a modifier which supports fast-clears.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Tested-by: Daniel Stone <daniels@collabora.com>
Acked-by: Nanley Chery <nanley.g.chery@intel.com>
si_get_total_colormask accesses NULL pointer on compute shaders
Fixes crashes on clover
Fixes: 0669dca9c0 ("radeonsi: skip DCC render feedback checking if color writes are disabled")
CC: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Adds a new debug tool to pad each GEM BO allocated with (weak)
pseudo-random noise values which are then checked after each
batchbuffer dispatch to the kernel. This can be quite valuable to
find diffucult to track down heisenberg style bugs.
[scott.d.phillips@intel.com: split to separate tool]
v2: (by Scott D Phillips)
- track gem handles per fd (Kevin)
- remove handles on GEM_CLOSE (Kevin)
- ignore prime handles
- meson & shell script
v3: (by Scott D Phillips)
- don't track prime bos at all (Kevin)
- protect the hash table with a mutex (Kevin)
- hook fds by drm_version.name, not path (Chris Wilson)
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
Reviewed-by: Kevin Rogovin <kevin.rogovin@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
This is not fully tested. Meson can't link LLVM even though automake can.
PATH=/usr/llvm/x86_64-linux-gnu/bin:$PATH meson build/ -Dgallium-va=false \
-Dplatforms=x11,drm -Dgallium-drivers=radeonsi -Ddri-drivers= \
-Dgallium-omx=disabled -Dgallium-xvmc=false -Dgles1=false \
-Dtexture-float=true -Dvulkan-drivers=
src/gallium/auxiliary/libgallium.a(gallivm_lp_bld_misc.cpp.o):
(.data.rel.ro._ZTI26DelegatingJITMemoryManager[_ZTI26DelegatingJITMemoryManager]+0x10):
undefined reference to `typeinfo for llvm::RTDyldMemoryManager'
Acked-by: Timothy Arceri <tarceri@itsqueeze.com>
Instead of updating the clear color in anv before a resolve, just let
blorp handle that for us during fast clears.
v5: Update comment about HiZ clear color (Jordan).
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
On Gen10+, instead of copying the clear color from the state buffer to
the surface state, just use the address of the state buffer in the
surface state directly. This way we can avoid the copy from state buffer
to surface state.
v4:
- Remove use_clear_address from anv code. (Jason)
- Use the helper to extract clear color from attachment (Jason)
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Extract the code from color_attachment_compute_aux_usage, so we can
later reuse it to update the clear color state buffer.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
On Gen10, when emitting the surface state, use the value stored in the
clear color entry buffer by using a clear color address in the surface
state.
v4: Use the clear color offset from the clear_color_bo, when available.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
On Gen10, whenever we do a fast clear, blorp will update the clear color
state buffer for us, as long as we set the clear color address
correctly.
However, on a hiz clear, if the surface is already on the fast clear
state we skip the actual fast clear operation and, before gen10, only
updated the miptree. On gen10+ we need to update the clear value state
buffer too, since blorp will not be doing a fast clear and updating it
for us.
v4:
- do not use clear_value_size in the for loop
- Get the address of the clear color from the aux buffer or the
clear_color_bo, depending on which one is available.
- let core blorp update the clear color, but also update it when we
skip a fast clear depth.
v5: Better subject (Jordan).
v6: Remove outdated comment (Jason).
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
In a follow up patch, we make use of clear_color_bo, which is in
mt->mcs_buf or mt->hiz_buf. To avoid duplicating more code that does the
same thing on both aux buffers, just use aux_buf already.
v5: Add aux_buf to brw_wm_surface_state too.
v6: Drop aux_surf and use aux_buf->surf instead (Jason).
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Add an extra BO to store clear color when we receive the aux buffer from
the window system. Since we have no control over the aux buffer size in
this case, we need the new BO to store only the clear color.
v5:
- Better subject (Jordan).
- Drop alignment from brw_bo_alloc().
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Similarly to vulkan where we store the clear value in the aux surface,
we can do the same in GL.
v2: Remove unneeded extra function.
v3: Use clear_value_state_size instead of clear_value_size.
v4:
- rename to clear_color_state_size
- store clear_color_bo and clear_color_offset in the aux buf struct
v5: Unreference clear color bo (Jordan)
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
We always want to update the fast clear color during a fast clear on
i965. On anv, we are doing that before a resolve, but by adding support
to blorp, we can do a similar thing and update it during a fast clear
instead.
The goal is to remove some code from anv that does such update, and
centralize everything in blorp, hopefully removing a lot of code
duplication. It also allows us to have a similar behavior on gen < 9 and
gen >= 10.
v5: s/we/we are/ (Jordan)
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
On gen10+, if surface->clear_color_addr is present, use it directly
intead of copying it to the surface state.
v4: Remove redundant #if clause for GEN <= 10 (Jason)
v5: Move flush after the reloc, and keep lower bits (Topi).
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
gen10 can emit the clear color by setting it on a buffer somewhere, and
then adding only the address to the surface state.
This commit add support for that on isl_surf_fill_state, and if that is
requested, skip setting the clear value itself.
v2: Add assert to make sure we are at least on gen10.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The size of the clear color struct (expected by the hardware) is 8
dwords (isl_dev.ss.clear_value_state_size here). But we still need to
track the size of the clear color, used when memcopying it to/from the
state buffer. For that we keep isl_dev.ss.clear_value_size.
v4:
- Add struct to gen11 too (Jason, Jordan)
- Add field for Converted Clear Color to gen11 (Jason)
- Add clear_color_state_offset to differentiate from
clear_value_offset.
- Fix all the places where clear_value_size was used.
v5 (Jason):
- Split genxml changes to another commit.
- Remove unnecessary gen checks.
- Bring back missing offset increment to init_fast_clear_color().
v6 (Jason):
- On init_fast_clear_color, change:
addr.offset += 4 => sdi.Address.offset += i * 4
- Use GEN_GEN instead of GEN_VERSIONx10.
[jordan.l.justen@intel.com: isl_device_init changes]
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
genxml does not support having two address fields with different names
but same position in the state struct. Both "Clear Color Address"
and "Clear Depth Address Low" mean the same thing, only for different
surface types.
To workaround this genxml limitation, rename "Clear Color Address"
to "Clear Value Address" and use it for both color and depth. Do the
same for the high bits.
TODO: add support for multiple addresses at the same position in the
xml.
v2: Combine high and low order bits into a single address field.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Some instructions contain fields that are either an address or a value
of some type based on the content of other fields, such as clear color
values vs address. That works fine if these fields are in the less
significant dword, the lower 32 bits of the address, because they get
OR'ed with the address. But if they are in the higher 32 bits, they get
discarded.
On Gen10 we have fields that share space with the higher 16 bits of the
address too. This commit makes sure those fields don't get discarded.
v5: Remove spurious whitespace (Jason).
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The lower bits seem to have extra fields in every platform but gen8
(even though we don't use them in gen9). So just go ahead and avoid
using them for the address.
v4: Use Jason's suggestion for comment explaining the change.
v5: Fix aux_address comment in anv_private.h (Jason)
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Fix use of alloca() without #include <c99_alloca.h> in 1da345e5
vbo/vbo_context.c: In function '_vbo_draw_indirect':
vbo/vbo_context.c:284:34: error: implicit declaration of function 'alloca' [-Werror=implicit-function-declaration]
struct _mesa_prim *space = alloca(draw_count*sizeof(struct _mesa_prim));
^~~~~~
vbo/vbo_context.c:284:34: warning: initialization makes pointer from integer without a cast [-Wint-conversion]
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Disabled by default for now, it can be enabled with
RADV_PERFTEST=outoforder.
No CTS regressions on Polaris, and all Vulkan games I tested
look good as well.
Expect small performance improvements for applications where
out-of-order rasterization can be enabled by the driver.
Loosely based on RadeonSI.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
../src/intel/compiler/brw_reg.h: In function ‘bool brw_regs_negative_equal(const brw_reg*, const brw_reg*)’:
../src/intel/compiler/brw_reg.h:305:1: warning: control reaches end of non-void function [-Wreturn-type]
Introduced by 8f83eea71e ("i965: Add negative_equals methods").
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
From the SPIR-V spec, OpTypeImage:
"Depth is whether or not this image is a depth image. (Note that
whether or not depth comparisons are actually done is a property of
the sampling opcode, not of this type declaration.)"
The sampling opcodes that specify depth comparisons are
OpImageSample{Proj}Dref{Explicit,Implicit}Lod, so we should set
is_shadow only for these (we were using the deph property of the
image until now).
v2:
- Do the same for OpImageDrefGather.
- Set is_shadow to false if the sampling opcode is not one of these (Jason)
- Reuse an existing switch statement instead of adding a new one (Jason)
Fixes crashes in:
dEQP-VK.spirv_assembly.instruction.graphics.image_sampler.depth_property.*
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: mesa-stable@lists.freedesktop.org
Otherwise we may end up trying to coalesce in a case such as
ssa_1 = fadd r1, r2
r3.x = fneg(r2);
r3 = vec4(ssa_1, ssa_1.y, ...)
and that would cause us to move the writes to r3 from the vec to the
fadd which would re-order them with respect to the write from the fneg.
In order to solve this, we just don't coalesce if the destination of the
vec is not SSA. We could try to get clever and still coalesce if there
are no writes to the destination of the vec between the vec and the ALU
source. However, since registers only come from phi webs and indirects,
the chances of having a vec with a register destination that is actually
coalescable into its source is very slim.
Shader-db results on Haswell:
total instructions in shared programs: 13657906 -> 13659101 (<.01%)
instructions in affected programs: 149291 -> 150486 (0.80%)
helped: 0
HURT: 592
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105440
Fixes: 2458ea95c5 "nir/lower_vec_to_movs: Coalesce movs on-the-fly when possible"
Reported-by: Vadym Shovkoplias <vadym.shovkoplias@globallogic.com>
Tested-by: Vadym Shovkoplias <vadym.shovkoplias@globallogic.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
If we close the fd before calling DRM_IOCTL_PRIME_FD_TO_HANDLE the kernel
will hit a -EBADF error. Move the close(fd) call to the end of
anv_CreateDmaBufImageINTEL().
Signed-off-by: Kevin Strasser <kevin.strasser@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This fixes a bug in radeonsi where LLVM cannot handle the case where
a break exists but its not the last instruction in the block.
LLVM would fail with:
Terminator found in the middle of a basic block!
LLVM ERROR: Broken function found, compilation aborted!
Fixes: 96fe8834f5 "glsl_to_tgsi: do fewer optimizations with GLSLOptimizeConservatively"
Reviewed-by: Matt Turner <mattst88@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105317
When running virgl on a GLES host the only sRGB formats that support
rendering is RGBA and RGBX. That pipe format is in the sRGB default
lists that the state tracker uses when mapping mesa formats.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Jakob Bornecrantz <jakob@collabora.com>
Prior to printing a decoded field, print out all dwords that field
belongs to. In particular with address fields spanning multiple
dwords, we want to have all the dwords presented before the field is
decoded to make it easier to read.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
MI_LOAD_REGISTER_IMM can load multiple (register, value) tuples in one
command. In our drivers we only use one tuple at a time, but the
kernel might load more than one at a time.
Instead of making all the tuple part of a group, we leave out the
first tuple (the one we use in the generated packing structures).
This is particularly useful for looking at error stats generated by
the kernel.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
The kernel reports workaround batch buffers, but we're not presenting
them currently. Also they might not be useful for debugging purely
userspace driver issues, when problems arise because of interactions
between kernel & userspace drivers, it's nice to be able to decode
them.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
This variable controls whether we link using the glsl code path or the
spirv path. It's set when we validate that all shaders are glsl or
spirv, but if there are no shaders attached to the program it will
remain unset, resulting in undefined behavior. We want to go down the
glsl path in that case, so initialize to false.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105820
Fixes: 16f6634e7f
("mesa/program: Link SPIR-V shaders using the SPIR-V code-path")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Tested-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
The driver already supports exporting the Layer and ViewportIndex
built-ins from vertex or tessellation shaders.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Add helpers to get the number of src/dest components for an intrinsic,
and update spots that were open-coding this logic to use the helpers
instead.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Since we were MARK flag for both preventing loops, and tracking whether
instructions were used, we could end up in an infinite loop due to
bd2ca2bcdd. Instead invert the logic.. mark all instructions UNUSED
up front and clear the flag as we visit them.
Fixes: bd2ca2bcdd freedreno/ir3: eliminate unused false-deps
Signed-off-by: Rob Clark <robdclark@gmail.com>
This reverts commit 41cf30b8bc.
Commit caused regressions with KHR-GLES3.packed_pixels.* tests.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Suggested-by: Eric Anholt <eric@anholt.net>
When allocating a buffer for DRI2, set the modifier to INVALID to inform
the backend that we have no supplied modifiers and it should do its own
thing. The missed initialisation forced linear, even if the
implementation had made other decisions.
This resulted in VC4 DRI2 clients failing with:
Modifier 0x0 vs. tiling (0x700000000000001) mismatch
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Andreas Müller <schnitzeltony@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Fixes: 3f8513172f ("gallium/winsys/drm: introduce modifier field to winsys_handle")
v2: rebased on top of subpass rework.
v3: rebased
v4:
- rebased
- reset pending clear views in one go rather one bit at a time (Caio)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
When multiview is active a subpass clear may only clear a subset of the
attachment layers. Other subpasses in the same render pass may also
clear too and we want to honor those clears as well, however, we need to
ensure that we only clear a layer once, on the first subpass that uses
a particular layer (view) of a given attachment.
This means that when we check if a subpass attachment needs to be cleared
we need to check if all the layers used by that subpass (as indicated by
its view_mask) have already been cleared in previous subpasses or not, in
which case, we must clear any pending layers used by the subpass, and only
those pending.
v2:
- track pending clear views in the attachment state (Jason)
- rebased on top of fast-clear rework.
v3:
- rebased on top of subpass rework.
v4: rebased.
v5 (Caio):
- Rebased.
- Initialize pending clear views to only have bits set for layers
that exist.
- Reset pending clear views in one go rather one bit at a time.
- Put "last subpass for this attachment" condition in a separate
function to simplify the conditional that resets pending_clear_aspects.
Fixes:
dEQP-VK.multiview.readback_implicit_clear.*
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
For now we skip SI && HAVE_LLVM < 0x0600 for simplicity. We also skip
setting the more accurate masks for builtin uniforms for now as it
causes some piglit regressions.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This will be shared by the TGSI and NIR backends. For simplicity
we leave the SI LLVM 5.0 and lower work around only in the TGSI
backend.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Buffers can be large, so we probably don't want to make them all 32x
bigger. But they can't be rendered to (at least in GL) so we don't
need this workaround to prevent page faults on mem<->gmem.
Cc: "18.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
We could alternatively fall back to using "old style" draw's for
mem<->gmem (ie. what <= a4xx do) when height is not aligned to 32,
but that is somewhat more work (and not really something that could
be applied to stable)
Cc: "18.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Fixes an issue that became possible when we started lowering phi webs to
regs (a7ea2b4e) (although was not really seen until we also switched to
using peephole select pass (ec8bc54a) instead of lowering *all* if/else
to select).
If texture coord (or anything else that uses create_collect() to collect
scalar values in a sequence of scalar registers) was consuming a value
produced on either side of an if/else (ie. a phi lowered to nir reg,
which in ir3 is an "array" of length 1) then register allocation would
happen incorrectly and we'd end up sampling from garbage coordinates.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Some instructions require src/dst to be in full or half precision
register depending on src/dst type. So do a better job of propagating
register type.
Signed-off-by: Rob Clark <robdclark@gmail.com>
We'll also need to be able to create a half-precision immediate. So
re-work create_immed(). Prep work for following patch.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Previously false-dependencies would get flagged as used, even if the
only "use" was a false dep to (for example) prevent a load from being
scheduled after a store.
In addition to being pointless instructions, in some cases they can
cause problems. For example, ldg (and similar instructions) depend on
an immed arg getting CP'd into the instruction, but this doesn't happen
if an instruction is otherwise unused. Which can result in undefined
results (overwriting unintended registers).
Signed-off-by: Rob Clark <robdclark@gmail.com>
Extend translate_sge_slt to emit these, in analogous fashion
but using CNDEv.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Add support for:
- PIPE_FORMAT_ETC1_RGB8
- PIPE_FORMAT_DXT1_RGB
- PIPE_FORMAT_DXT1_RGBA
- PIPE_FORMAT_DXT3_RGBA
- PIPE_FORMAT_DXT5_RGBA
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Denormalized texture coordinates are required for text rendering in
GALLIUM_HUD.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Textures will sometimes be updated if texture view state was
un-set, without this change that causes an assertion crash or
segfault.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Compose swizzles using util_format_compose_swizzles instead
of the custom code (which somehow had a bug).
This makes the GL_ALPHA internal format work.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Change use of BLEND_ to BLEND2_,
BLEND_* a3xx_rb_blend_opcode
BLEND2_* is a2xx_rb_blend_opcode
This makes no effective difference as the used enumerant has the same
value (0), but the other enumerants do not match 1-to-1 so this will
avoid future problems.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@gmail.com>
The format enumeration comes comes from the yamoto
register headers that are part of the amd-gpu kernel driver.
(see freedreno envytools commit b8fb7978e7ae106d0d11d0b238ab2ba2d4dd9d43)
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Avoid using malloc in the draw path of mesa.
Since the draw_count is a user api input, fall back to malloc if
the amount of consumed stack space may get too high.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Move the files, adapt to the naming scheme in tnl, update callers
and build system.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
The legacy draw paths from back before 2012 contained a gl_vertex_array
array for the inputs to be used for draw. So all draw methods from legacy
drivers and everything that goes through tnl are originally written
for this calling convention. The same goes for tools like t_rebase or
vbo_split*, that even partly still have the original calling convention
with a currently unused such pointer.
Back in 2012 patch 50f7e75
mesa: move gl_client_array*[] from vbo_draw_func into gl_context
introduced Array._DrawArrays, which was something that was IMO aiming for
a similar direction than Array._DrawVAO introduced recently.
Now several tools like t_rebase and vbo_split*, which are mostly used by
tnl based drivers, would need to be converted to use the internal
Array._DrawVAO instead of Array._DrawArrays. The same goes for the driver
backends that use any of these tools.
Alternatively we can reintroduce the gl_vertex_array array in its call
argument list and put these tools finally into the tnl directory.
So this change reintroduces this gl_vertex_array array for the legacy
draw paths that are still required for the tools t_rebase and vbo_split*.
A followup will move vbo_split also into tnl.
Note that none of the affected drivers use the DriverFlags.NewArray
driver bit. So it should be safe to remove this also for the legacy
draw path.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Remove the vbo_indirect_draw_func vbo callback and make the default
implementation use the drivers main draw callback function directly.
This will be needed with the next changes when drivers without own main
drivers DrawIndirect implementation get moved to the main drivers
Draw method.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Let the i965 backend have its own gl_vertex_array array and basically
reimplement the way _vbo_draw works.
Note that brw_draw_indirect_prims calls brw_draw_prims internally
and gets its update to Array._DrawArray by this way.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Let the gallium backend have its own gl_vertex_array array and basically
reimplement the way _vbo_draw works.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Otherwise, any indirect push constant access results in an assertion
failure when we start digging through the channel_sizes array. This
fixes dEQP-VK.pipeline.push_constant.graphics_pipeline.dynamic_index_vert
on Haswell. It should be a harmless no-op for GL since indirect push
constants aren't used there.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Fixes: e69e5c7006 "i965/vec4: load dvec3/4 uniforms first in the..."
Because nir_instr_remove is an inline wrapper around nir_instr_remove_v,
the compiler should be able to tell that the return value is unused and
not emit the extra code in most cases.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This allows the WGL_SWAP_INTERVAL env var to override any application
calls to wglSwapIntervalEXT(). Useful for debugging, or to set the
interval to zero to effectively disable the swap interval.
Note: we also rename the previous instance of SVGA_SWAP_INTERVAL to
WGL_SWAP_INTERVAL since this is a WGL feature and not related to the
svga driver.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
This fixes a Windows build warning where the prototypes for the ES
function in the header file don't match the prototypes in this file
because the GL_API and GLAPI macros are defined differently.
v2: defined GL_API to KEYWORD1 instead of GLAPI, per Mathias.
Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
The MSVC compiler warns when the function parameter types don't
exactly match with respect to enum vs. uint32_t. Use SpvOp everywhere.
Alternately, uint32_t could be used everywhere. There doesn't seem
to be an advantage to one over the other.
Reviewed-by: Neil Roberts <nroberts@igalia.com>
The SCons build broke with commit ba975140d3 because a SPIR-V
function is called from Mesa main. This adds a convenience library for
SPIR-V and adds it to everything that was including nir. It also adds
both nir and spirv to drivers/x11/SConscript.
Also add nir/spirv modules to osmesa and libgl-gdi targets. (Brian Paul)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105817
Reviewed-by: Brian Paul <brianp@vmware.com>
Tested-by: Brian Paul <brianp@vmware.com>
In the BITFIELD_MASK() macro, if b==32 the expression evaluates to
~0u, but the compiler still sees the expression (1 << 32) in the
unused part and issues a warning about integer bitshift overflow.
Fix that by using (b) % 32 to ensure the max shift is 31 bits.
This issue has been present for a while, but shows up much more
often because of the recent VBO changes.
Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
This assert is hit on hardware which does not expose GL 4.4 or GLES 3.1.
Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Signed-off-by: Jakob Bornecrantz <jakob@collabora.com>
The version passed to QueryVersion requests is the version that the
client supports. We were just passing in whatever version of XCB was
present on the system, which may not be a version that Mesa actually
explicitly supports, e.g. it might bring unwanted semantics.
Set specific protocol versions which we support, and only pass those.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Fixes: 7aeef2d4ef ("dri3: allow building against older xcb (v3)")
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This is the main fork of the shader compilation code-path, where a NIR
shader is obtained by calling spirv_to_nir() or glsl_to_nir(),
depending on its nature..
v2: Use 'spirv_data' member from gl_linked_shader to know which method
to call. (Timothy Arceri)
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This is basically a wrapper around spirv_to_nir() that includes
arguments setup and post-conversion validation.
v2: * Rebase update (SpirVCapabilities not a pointer anymore,
spirv_to_nir_options added, and others).
* Code-style improvements and remove debug hunk. (Timothy Arceri)
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This is the equivalent to link_shaders() from
src/compiler/glsl/linker.cpp, but for SPIR-V programs. It just
creates the program and its gl_linked_shader objects, giving drivers
the opportunity to implement any linking of SPIR-V shaders they choose,
at a later stage.
v2: Bail out if we see more that one shader for the same stage, and
add a corresponding comment. (Timothy Arceri)
v3:
* Adds also a linker error log to the condition above, with a
reference to the specification issue. (Timothy Arceri)
* Squash with the patch adding the function boilerplate (Timothy
Arceri)
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This is a reference to the spirv_data object stored in gl_shader, which
stores shader SPIR-V data that is needed during linking too.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
v2:
* Use gl_spirv_validation instead of spirv_to_nir. This method just
validates the shader. The conversion to NIR will happen later,
during linking. (Alejandro Piñeiro)
* Use gl_shader_spirv_data struct to store the SPIR-V data.
(Eduardo Lima)
* Use the 'spirv_data' member to tell if the gl_shader is a SPIR-V
shader, instead of a dedicated flag. (Timothy Arceri)
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Signed-off-by: Eduardo Lima Mitev <elima@igalia.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
ARB_gl_spirv adds the ability to use SPIR-V binaries, and a new
method, glSpecializeShader. Here we add a new function to do the
validation for this function:
From OpenGL 4.6 spec, section 7.2.1"
"Shader Specialization", error table:
INVALID_VALUE is generated if <pEntryPoint> does not name a valid
entry point for <shader>.
INVALID_VALUE is generated if any element of <pConstantIndex>
refers to a specialization constant that does not exist in the
shader module contained in <shader>.""
v2: rebase update (spirv_to_nir options added, changes on the warning
logging, and others)
v3: include passing options on common initialization, doesn't call
setjmp on common_initialization
v4: (after Jason comments):
* Rename common_initialization to vtn_builder_create
* Move validation method and their helpers to own source file.
* Create own handle_constant_decoration_cb instead of reuse existing one
v5: put vtn_build_create refactoring to their own patch (Jason)
v6: update after vtn_builder_create method renamed, add explanatory
comment, tweak existing comment and commit message (Timothy)
Refactored from spirv_to_nir, in order to be reused later.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
v2: renamed method (from vtn_builder_create), add explanatory comment
(Timothy)
Needed for ARB_gl_spirv. Those are not the same that the Intel vulkan
driver. From the ARB_spirv_extensions spec:
"3. If a new GL extension is added that includes SPIR-V support via
a new SPIR-V extension does it's SPIR-V extension also get
enumerated by the SPIR_V_EXTENSIONS_ARB query?.
RESOLVED. Yes. It's good to include it for consistency. Any SPIR-V
functionality supported beyond the SPIR-V version that is required
for the GL API version should be enumerated."
So in addition to the core SPIR-V support, there is the possibility of
specific GL extensions enabling specific SPIR-V extensions (so
capabilities). That would mean that it is possible that OpenGL and
Vulkan not having the same capabilities supported, even for the same
driver. For this reason it is better to keep them separated.
As an example: at the time of this patch writing Intel vulkan driver
support multiview, but there isn't any OpenGL multiview GL extension
supported.
Note: we initialize SPIR-V capabilities at brwCreateContext instead of
the usual brw_initialize_context_constants because we want to do that
only if the extension is enabled.
v2:
* Rebase update (SpirVCapabilities not a pointer anymore)
* Fill spirv capabilities for OpenGL >= 3.3 (Ian Romanick)
v3:
* Drop multiview support, as i965 doesn't support any multiview GL
extension (Jason)
* Fill spirv capabilities only if the extension is enabled (Jason)
v4: Capabilities are supported only on gen7+. Added comment and assert
(Jason)
Let the lowering in NIR handle it instead.
This hurts one shader that occurs twice in shader-db (SynMark GSCloth)
on IVB and HSW. No other shaders or platforms were affected.
total cycles in shared programs: 253438422 -> 253438426 (0.00%)
cycles in affected programs: 412 -> 416 (0.97%)
helped: 0
HURT: 2
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Antia Puentes <apuentes@igalia.com>
Future changes will add generated files used only from
src/compiler/glsl. These can't be built from Makefile.nir.am, and we
can't move all the rules from Makefile.nir.am to Makefile.spirv.am (and
it would be silly anyway).
v2: Do it for meson too.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> (the meson bits)
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com> (the automake bits)
This slightly simplifies later changes that add more Makefile.*.am
files.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>
Previously bitset.h would include u_math.h to get bitscan.h. u_math.h
lives in src/gallium/auxiliary/util while both bitset.h and bitscan.h
live in src/util. Having the one file directly include another file
that lives in the same directory makes much more sense.
As a side-effect, several files need to directly include standard header
files that were previously indirectly included.
v2: Fix build break in src/amd/common/ac_nir_to_llvm.c.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>
Previously size=0, element_size=0 would have been allowed. That
combination can only lead to despair.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
The new name make the zero-input behavior more obvious. The next
patch adds a new function with different zero-input behavior.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Suggested-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
This corrects pkg-config to use the libdrm version (as computed by the
previous patch) instead of using a hardcoded value that may or may not
(probably not) be right.
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Currently each driver specifies it's own version, and core libdrm
specifies a version. In the most common case this is fine, since there
will be exactly one libdrm installed on a system, but if there are more
than one it's possible that mesa will be linked against different
versions of libdrm. There is also the possibility that the current
approach makes the pkg-config files we generate incorrect, since there
could be #defines that use newer features if they're available.
This patch corrects all of that. All of the versions are still set by
driver (along with a default core version). Then all of the drivers that
are enabled have their versions compared and the highest version is
selected, then all libdrm checks are made with that version.
v2: - Reorder the list to have the name first and whether the dependency
is needed second (Eric)
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
in glapi_dispatch.c, as we have for many other GLES functions.
Fixes a cross-compile issue (missing prototype) when GLES support
is disabled.
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Found running "The Witness" in Wine. Without this patch, texture views created
on multi-sample textures would have a GL_TEXTURE_SAMPLES of 0. All things
considered such views actually work surprisingly well, but when combined with
(plain) multi-sample textures in a framebuffer object, the resulting FBO is
incomplete because the sample counts don't match.
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Henri Verbeet <hverbeet@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
To fix a regression in:
dEQP-VK.spirv_assembly.instruction.graphics.variable_init.output.struct
And the following regressions (Polaris only):
dEQP-VK.glsl.indexing.varying_array.*
Fixes: f3275ca01c ("ac/nir: only enable used channels when exporting parameters")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
In the absence of a general NIR or VIR-level scheduler, this at least
avoids spilling in
GTF-GLES3.gtf.GL3Tests.uniform_buffer_object.uniform_buffer_object_storage_layouts
I'm disappointed that the compiler didn't warn me about use of
uninitialized uc in these paths. Just use the incoming clear color
instead of the packing temporary if we're doing our own packing.
Fixes GTF-GLES3.gtf.GL3Tests.color_buffer_float.color_buffer_float_clamp_*
We always want A in the A slot in the tile buffer, and any other swapping
should happen elsewhere.
Fixes RGBA4-using cases in fbo-clear-formats and
GTF-GLES3.gtf.GL3Tests.color_buffer_float.color_buffer_float_clamp_fixed.
We can't necessarily finalize the texture at this point if we're rendering
to a texture image whose format is different from the baselevel's format.
This was introduced as a fix for fbo-incomplete-texture-03 in
de414f4915, but the later fix for vmware on
that testcase in 95d5c48f68 made it
unnecessary.
Fixes assertion failures in util_resource_copy_region() in
KHR-GLES3.copy_tex_image_conversions.forbidden.* when trying to finalize
an R8 texture image to the RG8 texture object's pt.
Reviewed-by: Brian Paul <brianp@vmware.com>
On GFX9 whether the buffer size is interpreted as elements or bytes
depends on whether IDXEN is enabled in the instruction. If the index
is a constant zero, LLVM optimizes IDXEN to 0.
Now the size in elements is interpreted in bytes which of course
results in out of bounds accesses.
The correct fix is most likely to disable the LLVM optimization,
but we need something to work with LLVM <= 6.0.
radeonsi does the max between stride and element count on the CPU
but that results in the size intrinsics returning the wrong size
for the buffer. This would cause CTS errors for radv.
v2: Also include the store changes.
Fixes: e38685cc62 'Revert "radv: disable support for VEGA for now."'
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
nir_intrinsics.c existed as a static file until commit 76dfed8ae2 began
generating it as part of the build process. autotools is incapable of
coping, and so a build-tree from before this commit would then fail with
it:
[4]: *** No rule to make target '../../../mesa/src/compiler/nir/nir_intrinsics.c', needed by 'nir/nir_intrinsics.lo'. Stop.
Add a few lines to configure.ac to update the broken build files.
Fixes: 76dfed8ae2 ("nir: mako all the intrinsics")
Otherwise meson won't read the VERSION file and won't set a version.
That means that pkg-config files will have version unset as well.
Fixes: 3e9533d9b8
("meson: Add script to use VERSION file for getting version")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
I assume this was implemented in a previous version of that commit, but
was removed in the version that actually landed.
Fixes: 8430af5ebe "Add support for swrast to the DRM EGL platform"
Cc: Giovanni Campagna <gcampagna@src.gnome.org>
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The power-of-two padded size that gets minified is based on level 1's
dimensions, not level 0's, which starts to differ at a width of 9.
Fixes all failures on texelFetch fs sampler2D 1x1x1-64x64x1
bo->align is always 0; there's no need to waste 8 bytes storing it.
Thanks to C99 initializers zeroing fields, we can completely drop the
only read of the field altogether.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Buffers are always page aligned on 965+ hardware; I believe this extra
parameter is a vestige from the Gen2-3 era.
All callers pass 0, and in fact we assert that the alignment is 0 unless
BO_ALLOC_BUSY is set (for some reason). We can just drop the parameter
and set the value to 0 explicitly.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
intel_miptree_create_for_bo does not actually allocate a BO, so
specifying allocation flags accomplishes nothing and is confusing.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This is just zero - passing nothing already gives us a post-sync
operation of "nothing".
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
I have no idea why but having dest_components == -1 was causing a memory
leak somewhere. Without this, you can't get through a full shader-db
run without running out of memory.
Reviewed-by: Rob Clark <robdclark@gmail.com>
This was causing us to walk dest_components times over a thing with no
destination. This happened to work because all of the image intrinsics
without a destination also happened to have dest_components == 0. We
shouldn't be reading dest_components if has_dest == false.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
There were two problems, both of which are fixed now:
- The indirect address was not being shifted by 4
- The indirect address was being placed as an argument in the offset case
This fixes some of the new interpolateAt* piglits which now test for
these situations.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
When an if nesting inside anouther if is optimised away we can
end up with a loop terminator and following block that looks like
this:
if ssa_596 {
block block_5:
/* preds: block_4 */
vec1 32 ssa_601 = load_const (0xffffffff /* -nan */)
break
/* succs: block_8 */
} else {
block block_6:
/* preds: block_4 */
/* succs: block_7 */
}
block block_7:
/* preds: block_6 */
vec1 32 ssa_602 = phi block_6: ssa_552
vec1 32 ssa_603 = phi block_6: ssa_553
vec1 32 ssa_604 = iadd ssa_551, ssa_66
The problem is the phis. Loop unrolling expects the last block in
the loop to be empty once we splice the instructions in the last
block into the continue branch. The problem is we cant move phis
so here we lower the phis to regs when preparing the loop for
unrolling. As it could be possible to have multiple additional
blocks/ifs following the terminator we just convert all phis at
the top level of the loop body for simplicity.
We also add some comments to loop_prepare_for_unroll() while we
are here.
Fixes: 51daccb289 "nir: add a loop unrolling pass"
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105670
The location was only being incremented the first time we processed a
location. This meant we would incorrectly skip some elements of
an array if the first element was packed and proccessed previously
but other elements were not.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We need to wait until after the writemask is widened before we
adjust it for component packing.
Together with the previous patch this fixes a number of
arb_enhanced_layouts component layout piglit tests.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This fixes tcs/tes varying arrays where we dont lower indirects and
therefore don't split arrays. Here we also fix useagemask for dual
slot doubles.
Fixes a number of arb_tessellation_shader piglit tests.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
How many times did I look at this table without noticing the missing 'G'
in the texture column?
Fixes KHR-GLES3.copy_tex_image_conversions.required.* on 7268.
Apparently it is not happy about things like: .foo = {}
So skip over initializers for empty lists.
Fixes: 76dfed8ae2
Reported-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Note: the file was originally 17.4.0, yet git stuggles to detect the
move :-\
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit dceb1ce807)
I threatened to do this a long time ago.. I probably *should* have done
it a long time ago when there where many fewer intrinsics. But the
system of macro/#include magic for dealing with intrinsics is a bit
annoying, and python has the nice property of optional fxn params,
making it possible to define new intrinsics while ignoring parameters
that are not applicable (and naming optional params). And not having to
specify various array lengths explicitly is nice too.
I think the end result makes it easier to add new intrinsics.
v2: couple small fixes found with a test program to compare the old and
new tables
v3: misc comments, don't rely on capture=true for meson.build, get rid
of system_values table to avoid return value of intrinsic() and
*mostly* remove side-effects, add autotools build support
v4: scons build
Signed-off-by: Rob Clark <robdclark@gmail.com>
Acked-by: Dylan Baker <dylan@pnwbakers.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
EXT_color_buffer_float spec states:
"An INVALID_OPERATION error is generated ... if the color buffer is
a floating-point format and type is not FLOAT, HALF FLOAT, or
UNSIGNED_INT_10F_11F_11F_REV."
This means that GL_HALF_FLOAT type should be supported when color
buffer has floating-point format.
Fixes Android CTS test android.view.cts.PixelCopyTest.
v2: remove comments of EXT_color_buffer_half_float as
EXT_color_buffer_float can use type GL_HALF_FLOAT
Signed-off-by: Lin Johnson <johnson.lin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
This is the actual hardware layout, and we were only swizzling R/B back
around in texturing. Fixes part of
KHR-GLES3.copy_tex_image_conversions.required.cubemap_negx_cubemap_negx in
simulation.
Once we've disabled EZ for some draws, we need to not use EZ on future
draws. Implementing that made implementing the GT/GE direction trivial.
Fixes KHR-GLES3.shaders.fragdepth.compare.no_write on V3D 4.1 simulation.
On 3.x, we just don't flag the primitive as needing TF, but those
primitive bits are now allocated to the new primitive types. Now we need
to actually update the enable flag at draw time.
The next job from this client will turn it back on unless TF gets
disabled, but we don't want the state to leak from this client to another
(which causes GPU hangs).
I had this note to myself, and it turns out that a lot of CTS tests use
XFB with points to get data out without using a fragment shader. Keep
track of two sets of precomputed TF specs (point size in VPM prologue or
not), and switch between them when we enable/disable point size.
The length-1 field only has 4 bits, so we need to generate separate specs
when there's too much TF output per buffer.
Fixes
GTF-GLES3.gtf.GL3Tests.transform_feedback.transform_feedback_builtin_type
and transform_feedback_max_interleaved.
GTF-GLES3.gtf.GL3Tests.instanced_arrays.instanced_arrays_divisor uses -1
as a divisor, so we would overflow to count=0 and upload no data,
triggering the assert below. We want to upload 1 element in this case,
fixing the test on VC5.
v2: Use some more obvious logic, and explain why we don't use the normal
round_up().
Reviewed-by: Brian Paul <brianp@vmware.com>
There's nothing to worry about here -- the A channel just gets dropped by
the blit. This avoids a segfault in the fallback path when copying from a
RGBA16_SINT renderbuffer to a RGB16_SINT destination represented by an
RGBA16_SINT texture (the fallback path tries to get/fetch to float
buffers, but the float pack/unpack functions are NULL for SINT/UINT).
Fixes KHR-GLES3.packed_pixels.pbo_rectangle.rgba16i on VC5.
v2: Extract the logic to a helper function and explain what's going on
better.
v3: const-qualify args
Reviewed-by: Brian Paul <brianp@vmware.com>
Just checking for 2 jumps is not enough to be sure we can do a
complex loop unroll. We need to make sure we also have also found
2 loop terminators.
Without this we were attempting to unroll a loop where the second
jump was nested inside multiple ifs which loop analysis is unable
to detect as a terminator. We ended up splicing out the first
terminator but failed to actually unroll the loop, this resulted
in the creation of a possible infinite loop.
Fixes: 646621c66d "glsl: make loop unrolling more like the nir unrolling path"
Tested-by: Gert Wollny <gw.fossdev@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105670
A recent commit (see below) triggered some cases where conditional
modifier propagation and dead code elimination would cause a MAD
instruction like the following to be generated:
mad.l.f0 null, ...
Matt pointed out that fs_visitor::fixup_3src_null_dest() fixes cases
like this in the scalar backend. This commit basically ports that code
to the vec4 backend.
NOTE: I have sent a couple tests to the piglit list that reproduce this
bug *without* the commit mentioned below. This commit fixes those
tests.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Tapani Pälli <tapani.palli@intel.com>
Cc: mesa-stable@lists.freedesktop.org
Fixes: ee63933a7 ("nir: Distribute binary operations with constants into bcsel")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105704
No shader-db changes. This source must have been written by a previous
instruction, so it cannot be a uniform or a shader input. However, this
change allows the next commit to help more shaders.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
No shader-db changes. This source must have been written by a previous
instruction, so it cannot be a uniform or a shader input. However, this
change allows the next commit to help about 900 more shaders.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This method is similar to the existing ::equals methods. Instead of
testing that two src_regs are equal to each other, it tests that one is
the negation of the other.
v2: Simplify various checks based on suggestions from Matt. Use
src_reg::type instead of fixed_hw_reg.type in a check. Also suggested
by Matt.
v3: Rebase on 3 years. Fix some problems with negative_equals with VF
constants. Add fs_reg::negative_equals.
v4: Replace the existing default case with BRW_REGISTER_TYPE_UB,
BRW_REGISTER_TYPE_B, and BRW_REGISTER_TYPE_NF. Suggested by Matt.
Expand the FINISHME comment to better explain why it isn't already
finished.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com> [v3]
Reviewed-by: Matt Turner <mattst88@gmail.com>
Not used in GL but 8 and 16 component vectors exist in OpenCL.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Refactor things so there isn't so much typing involved to add new
things.
Also drops a pointless conditional (out of bounds rows or columns
already returns error_type in all paths.. might as well drop it
rather than make the check more convoluted in the next patch by
adding the vec8/vec16 case).
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
The currently we use the singular CHECK_HEADER combined with explicit
append to the DEFINES variable. That is a legacy misnomer, since it
requires us to add $DEFINES to every piece that we build.
Using the plural version of the helper sets the HAVE_ macro for us, plus
ensures it's passed to the compiler - if config.h is available in there
(not in the case of mesa) otherwise on the command line.
In hindsight, we should replace all the AC_CHECK_{FUNC,HEADER} instances
with the plural version (or even the _ONCE suffixed version) and drop
the DEFINES hacks.
Fixes: cbee1bfb34 ("meson/configure: detect endian.h instead of trying
to guess when it's available")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105717
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Tested-by: Clayton Craft <clayton.a.craft@intel.com>
Need to update the tgsi code and st_glsl_to_tgsi code at the same time
to prevent compile break since C++ is much pickier about implicit
enum/unsigned casting.
Bump size of glsl_to_tgsi_instruction::op to 10 bits to be sure to
avoid MSVC signed enum overflow issue. No change in class size.
Reviewed-by: Eric Anholt <eric@anholt.net>
I don't think it actually fixes anything, but that's nice not to have valgrind warnings.
It manifests itself when running the piglit test : glsl-fs-raytrace-bug27060
==2058== Uninitialised byte(s) found during client check request
==2058== at 0xC5BB040: blob_write_bytes (blob.c:152)
==2058== by 0xC595359: write_variable (nir_serialize.c:144)
==2058== by 0xC59560C: write_var_list (nir_serialize.c:192)
==2058== by 0xC5982E4: nir_serialize (nir_serialize.c:1124)
==2058== by 0xC0B729D: brw_program_serialize_nir (brw_program.c:835)
==2058== by 0xC0AB2D6: brw_link_shader (brw_link.cpp:358)
==2058== by 0xC32FE3F: _mesa_glsl_link_shader (ir_to_mesa.cpp:3169)
==2058== by 0xC36C7ED: create_new_program(gl_context*, state_key*) (ff_fragment_shader.cpp:1127)
==2058== by 0xC36C8A6: _mesa_get_fixed_func_fragment_program (ff_fragment_shader.cpp:1157)
==2058== by 0xC1B50AF: update_program (state.c:134)
==2058== by 0xC1B56DF: _mesa_update_state_locked (state.c:352)
==2058== by 0xC1B579A: _mesa_update_state (state.c:386)
==2058== Address 0xf1eab8a is 58 bytes inside a block of size 96 alloc'd
==2058== at 0x4C2CB8F: malloc (vg_replace_malloc.c:299)
==2058== by 0xC0FD306: ralloc_size (ralloc.c:121)
==2058== by 0xC0FD5B1: ralloc_array_size (ralloc.c:208)
==2058== by 0xC452B3B: (anonymous namespace)::nir_visitor::visit(ir_variable*) (glsl_to_nir.cpp:448)
==2058== by 0xC45CE8B: ir_variable::accept(ir_visitor*) (ir.h:428)
==2058== by 0xC46D0B5: visit_exec_list(exec_list*, ir_visitor*) (ir.cpp:1898)
==2058== by 0xC451D2F: glsl_to_nir (glsl_to_nir.cpp:162)
==2058== by 0xC0B5223: brw_create_nir (brw_program.c:79)
==2058== by 0xC0AAB67: brw_link_shader (brw_link.cpp:257)
==2058== by 0xC32FE3F: _mesa_glsl_link_shader (ir_to_mesa.cpp:3169)
==2058== by 0xC36C7ED: create_new_program(gl_context*, state_key*) (ff_fragment_shader.cpp:1127)
==2058== by 0xC36C8A6: _mesa_get_fixed_func_fragment_program (ff_fragment_shader.cpp:1157)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Instead we will re-generate them again on building.
v2: get rid of BUILT_SOURCES (Daniel, Emil)
v3: keep BUILT_SOURCES for egl/Makefile.am (Emil)
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The hardware only supports 32-bit depth surfaces, but we can
enable TC-compat HTILE for 16-bit depth surfaces if no Z planes
are compressed.
The main benefit is to reduce the number of depth decompression
passes. Also, we don't need to implement DB->CB copies which is
fine.
This improves Serious Sam 2017 by +4%. Talos and F12017 are also
affected but I don't see a performance difference.
This also improves the shadowmapping Vulkan demo by 10-15%
(FPS is now similar to AMDVLK).
No CTS regressions on Polaris10.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Generated with
git grep -l nir_intrinsic_image | xargs \
sed -i 's/nir_intrinsic_image/nir_intrinsic_image_var/g'
and some manual fixing in nir_intrinsics.h
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Fixes
GTF-GLES3.gtf.GL3Tests.vertex_type_2_10_10_10_rev.vertex_type_2_10_10_10_rev_invalid2,
where we hadn't thrown a GL error as needed in the extension-disabled
case. We want to be exposing the extension anyway.
Our backend needs some sort of vertex position value to emit the scaled
viewport values and such. Fixes potential segfaults in
KHR-GLES3.copy_tex_image_conversions.required.cubemap_negx_cubemap_negx
Some equations of the CNL metrics started to use operators we haven't
defined yet, just add those.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
With the introduction of asymmetric slices in CNL, we cannot rely on
the previous SUBSLICE_MASK getparam to tell userspace what subslices
are available.
We introduce a new uAPI in the kernel driver to report exactly what
part of the GPU are fused and require this to be available on Gen10+.
Prior generations can continue to rely on GETPARAM on older kernels.
This patch is quite a lot of code because we have to support lots of
different kernel versions, ranging from not providing any information
(for Haswell on 4.13 through 4.17), to being able to query through
GETPARAM (for gen8/9 on 4.13 through 4.17), to finally requiring 4.17
for Gen10+.
This change stores topology information in a unified way on
brw_context.topology from the various kernel APIs. And then generates
the appropriate values for the equations from that unified topology.
v2: Move slice/subslice masks fields to gen_device_info (Rafael)
v3: Add a gen_device_info_subslice_available() helper (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
There are a couple of ways we can get the fusing information from the
kernel :
- Through DRM_I915_GETPARAM with the SLICE_MASK/SUBSLICE_MASK
parameters
- Through the new DRM_IOCTL_I915_QUERY by requesting the
DRM_I915_QUERY_TOPOLOGY_INFO
The second method is more accurate and also gives us the EUs fusing
masks. It's also a requirement for CNL as this platform has asymetric
subslices and the first method SUBSLICE_MASK value is assumed uniform
across slices.
v2: Change gen_device_info_update_from_masks() to generate topology
and call into gen_device_info_update_from_topology (Lionel/Ken)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We want to store values coming from the kernel but as a first step, we
can generate mask values out the numbers already stored in the
gen_device_info masks.
v2: Add a helper to set EU masks (Lionel/Ken)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This will be reused to store values reported by the kernel. The main
use case will be for use as the input values of the metric sets
equations for the INTEL_performance_queries extension. By storing this
information in the gen_device_info we make this non GL specific so
this can be reused by Vulkan if we ever have an equivalent extension.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This reverts commit cb2ddcefa5.
This causes clang to error out building C++ code. The plan is to fix the
build to work with clang, but in the mean time we'll just revert this
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Acked-by: Eric Engestrom <eric@engestrom.ch>
When registring configurations to the kernel for the first time, we
run into an issue where the id number is not properly set (we're using
the wrong variable). As a result when trying to use that id later on,
we get an error.
This issue manifest itself the first time you use frameretrace after
reboot, subsequent runs are fine.
Fixes: 27ee83eaf7 ("i965: perf: add support for userspace configurations")
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Add a new struct kms_sw_plane which delegate a plane and use it
in place of sw_displaytarget. Multiple planes share same underlying
kms_sw_displaytarget.
v2:
- add more check for plane size (Tomasz)
v3:
- split from larger patch (Emil)
v4:
- no change from v3
v5:
- remove mapped field (Tomasz)
v6:
- remove change-id in commit message (Tomasz)
v7:
- add revision history in commit message (Emil)
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Lepton Wu <lepton@chromium.org>
If user calls map twice for kms_sw_displaytarget, the first mapped
buffer could get leaked. Instead of calling mmap every time, just
reuse previous mapping. Since user could map same displaytarget with
different flags, we have to keep two different pointers, one for rw
mapping and one for ro mapping. Also introduce reference count for
mapped buffer so we can unmap them at right time.
v2:
- avoid duplicated mapping and leaked mapping (Tomasz)
v3:
- split from larger patch (Emil)
v4:
- remove munmap from dt_destory (Emil)
v5:
- introduce reference count for mapping (Tomasz)
- add back munmap in dt_destory
v6:
- remove change-id in commit message (Tomasz)
v7:
- remove munmap from dt_destory again (Emil)
- add revision history in commit message (Emil)
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Lepton Wu <lepton@chromium.org>
As the other VC4 files do. Otherwise, it won't find nir_builder.h
v2: add path in source code rather changing autotools (Emil)
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Disabling fast color clear makes fbo-clearmipmap test render correct
texture in base miplevel. Fast color clear is anyways disabled for
non-base miplevels.
Acked-by: Matt Turner <mattst88@gmail.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Rafael ran piglit with the test code enabled and saw no additional GPU
hangs.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
On gen11+ AUX_HIZ is not a supported value for surfaces being
sampled by the 3D sampler.
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We all know the platform names, and I don't want to update this list
continually.
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
commit 03dd9a88b0 introduced per surface
queues, but the display_sync for swrast_commit_backbuffer remained on
the old queue. This is likely to break when dispatching the correct
queue at the top of function (which can't dispatch the sync callback
we're waiting for).
The easiest known reproduction case is running weston-subsurfaces under
weston --use-pixman
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
We're trying to be -Wundef clean so that we can turn it on (and
eventually make it an error).
Note that the OMX code already used `#if ENABLE_ST_OMX_BELLAGIO` instead
of #ifdef; I could've changed these, but the point of -Wundef is to
catch typos, so we might as well make the change the right way.
Fixes: 83d4a5d5ae "st/omx/tizonia: Add H.264 decoder"
Fixes: b2f2236dc5 "st/omx/tizonia: Add H.264 encoder"
Fixes: c62cf1f165 "st/omx/tizonia/h264d: Add EGLImage support"
Cc: Gurkirpal Singh <gurkirpal204@gmail.com>
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
and let's make sure `with_gallium_omx` is never 'auto' and can only be
one of [bellagio, tizonia, disabled].
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
The DriverFlags.NewArray bit is already set to NewDriverState in
_mesa_set_draw_vao since we have actually just above changed the VAOs
content. So this can be removed.
The _vbo_update_inputs is called by the vbo...recalculate_inputs being
set through the same mechanism as described above.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
At the current state, _vbo_update_inputs is called from
the draw callback if vbo...recalculate_inputs is set.
But that is now set of the _DrawVAO or its content or the
vertex program mode is changed.
So remove _vbo_update_inputs from the direct dlist draw path.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Now that setting vbo...recalculate_inputs also sets the
DriverFlags.NewArray bits into the NewDriverState setting that from
vbo_bind_arrays is redundant.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
This flag is now set when the actual Array._DrawVAO changes.
So setting this flag is redundant here.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Since arrays also handle the mapping of current values into the
disabled array slots, we need to tell the array update code that
this mapping has changed. Also mark only dirty if it has changed.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Both mean something very similar and are set at the same time now.
For that vbo module to be set from core mesa, implement a public vbo
module method to set that flag. In the longer term the flag should
vanish in favor of a driver flag of the appropriate driver.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Update the VAO internal state on Array._DrawVAO instead of
Array.VAO. Also the VAO internal state update gets triggered now
by a change of Array._DrawVAO instead of the _NEW_ARRAY state flag.
Also no driver looks at any VAO's NewArrays value from within
the Driver.UpdateState callback. So it should be safe to move
this update into the _mesa_set_draw_vao method.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Factor out that common call into the almost single place.
Remove the _mesa_set_drawing_arrays call from vbo_{exec,save}_draw code
paths as the function is now called through vbo_bind_arrays.
Prepare updating the list of struct gl_vertex_array entries via
calling _vbo_update_inputs for being pushed into those drivers that
finally work on that long list of gl_vertex_array pointers.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Move vbo draw functions into struct dd_function_table.
For now just wrap the underlying vbo functions.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
If view mask has only one bit set, view index is effectively a
constant, so doesn't need to be passed to the next stages, just always
set it.
Part of this was in the original patch that added
anv_nir_lower_multiview.c but disabled.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The view_index is encoded in the remainder of dividing instance id by
the number of views in the view mask (n). In the general case (handled
by the else clause), there is a need to map from 0..n-1 into the
number of the view being masked. For that a map is encoded.
In the case only the first n bits in the mask are set, the mapping is
trivial, 0..n-1 already represent what view is being referred to.
That case was in the original patch that added
anv_nir_lower_multiview.c but disabled.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Unfortunately TGSI doesn't record the type of the FS output like GLSL
does, but VC5's TLB writes depend on the output's base type. Just record
the type in the key at variant compile time when we've got a TGSI input
and then fix it up.
Fixes KHR-GLES3.packed_pixels.pbo_rectangle.rgba32i/ui and apparently a
GPU hang that breaks most tests that come after it.
The implementation is inspired by
lower_instructions_visitor::dfrexp_sig_to_arith.
This has been tested against the arb_gpu_shader_fp64/fs-frexp-dvec4
test using the ARB_gl_spirv branch.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
ring_name is "<class_name> + <instance_id>" (e.g. rcs0). So we need to
first compare the class name only, then get the instance id.
Without this, INSTDONE is not being decoded.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Shader-db runtime change avarage of five runs:
Before 125,77 seconds (+/- 0,09%)
After 124,48 seconds (+/- 0,07%)
Tested-by: Dieter Nützel <Dieter at nuetzel-hh.de>
Reviewed-by: Eric Anholt <eric at anholt.net>
Make a simple worklist by basically just wrapping u_vector.
This is intended used in nir_opt_dce to reduce the number of calls
to ralloc, as we are currenlty spamming ralloc quite bad. It should
also give better cache locality and much lower memory usage.
Tested-by: Dieter Nützel <Dieter at nuetzel-hh.de>
Reviewed-by: Eric Anholt <eric at anholt.net>
Different registers are used for execlist submission in gen11, so
also watch those. This code only watches element zero of the
submit queue, which is all aubdump currently writes.
Tested-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
The coordinate shaders may now have side effects in the form of transform
feedback.
Part of fixing
GTF-GLES3.gtf.GL3Tests.transform_feedback.transform_feedback_misc
Generalize the code for remove dead loops to also remove dead if
nodes. The conditions are the same in both cases, if the node (and
it's children) don't have side-effects AND the nodes after it don't
use the values produced by the node.
The only difference is when evaluating side effects: loops consider
only return jumps as a side-effect -- they can stop execution of nodes
after it; 'if' nodes outside loops should consider all kinds of
jumps (return, break, continue) since all of them can cause execution
of nodes after it to be skipped.
After this patch, empty ifs (those which both then and else blocks are
empty) will be removed by nir_opt_dead_cf.
It caused no change to shader-db, in part because the removal of empty
ifs is currently covered by nir_opt_peephole_select.
v2: Improve the identification of cases where break/continue can cause
side-effects. (Jason)
v3: Move code comment changes to a different patch. (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
On the CI family, firmware requires the destory command have to be the
last command in the IB, moving feedback command after destroy is causing
issues on CI cards, so we have to keep the previous logic that moves
destroy back to the last command.
But as the original issue fixed previously, with the newer family like Vega10,
feedback command have to be included inside of the task info command along
with destroy command.
Fixes: 6d74cb25("radeon/vce: move destroy command before feedback command")
Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: mesa-stable@lists.freedesktop.org
Use get_language_version to calculate default cl standard based on
device capabilities and -cl-std specified in build options.
v5; move dev_clc_version declaration from an earlier patch
v4: Squash the __OPENCL_VERSION__ and CLC language version patches
v3: (Jan) Allow device_version up to 2.2 while device_clc_version
only goes to 2.0
Use get_cl_version to calculate version instead
v2: Split out from the previous patch (Pierre)
Signed-off-by: Aaron Watry <awatry@gmail.com>
Reviewed-by: Pierre Moreau <pierre.morrow@free.fr>
CC: Jan Vesely <jan.vesely@rutgers.edu>
Used to calculate the default CLC language version based on the --cl-std in build args
and the device capabilities.
According to section 5.8.4.5 of the 2.0 spec, the CL C version is chosen by:
1) If you have -cl-std=CL1.1+ use the version specified
2) If not, use the highest 1.x version that the device supports
Curiously, there is no valid value for -cl-std=CL1.0
Validates requested cl-std against device_clc_version
Signed-off-by: Aaron Watry <awatry@gmail.com>
Reviewed-by: Pierre Moreau <pierre.morrow@free.fr>
v7: (Pierre) Split cl/clc versions into separate lists and
make more references const.
v6: (Pierre) Add more const and fix some whitespace
v5: (Aaron) Use a collection of cl versions instead of switch cases
Consolidates the string, numeric version, and clc langstandard::kind
v4: (Pierre) Split get_language_version addition and use into separate patches
Squash patches that add the helpers and validate the language standard
v3: Change device_version to device_clc_version
v2: (Pierre) Move create_compiler_instance changes to correct patch
to prevent temporary build breakage.
Convert version_str into unsigned and use it to find language version
Add build_error for unknown language version string
Whitespace fixes
The compiler doesn't notice that the condition for num_layers to be
undefined already defined it above (as our assert checked in a debug
build).
v2: Move the pair of assignments to one outside of the block.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This extension removes the restrictions on minDepth/maxDepth,
minDepthBounds/maxDepthBounds and VkClearDepthStencilValue::depth.
The following CTS tests now pass:
dEQP-VK.glsl.builtin_var.fragdepth.line_list_d32_sfloat_large_depth
dEQP-VK.glsl.builtin_var.fragdepth.point_list_d32_sfloat_large_depth
dEQP-VK.glsl.builtin_var.fragdepth.triangle_list_d32_sfloat_large_depth
dEQP-VK.draw.inverted_depth_ranges.nodepthclamp_depth_range_unrestricted
dEQP-VK.draw.inverted_depth_ranges.depthclamp_depth_range_unrestricted
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This was previously ignored.
Along with the virglrenderer patch, this fixes ~100 dEQP tests:
dEQP-GLES3.functional.texture.filtering.cube.*
Signed-off-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
As of earlier commit, the --header was made a hard requirement when
using --code.
Hence - annotate both as required and drop a few no longer needed
checks.
Fixes: 035cc7a12d ("i965: perf: reduce i965 binary size")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Autotools/android builds generate the header & code files in 2 steps,
but the code generation requires the name of the header file to
include it.
This change generates both files in one command.
Fixes: 035cc7a12d ("i965: perf: reduce i965 binary size")
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The have-new-DRI3 codepaths would never actually properly trigger, since
there was a typo in configure.ac which broke the version check. This
went unnoticed but for an error in config.log if you looked closely
enough.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Lukas F. Hartmann <lukas@mntmn.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Fixes: 7aeef2d4ef ("dri3: allow building against older xcb (v3)")
Cc: Dave Airlie <airlied@redhat.com>
On all Arm architectures (ARMv7 and below as 'arm', ARMv8 and above as
'aarch64'), only build swrast for DRI drivers. The only classic drivers
which could be used are r200 and NV20 cards, which seems unlikely enough
that it shouldn't be the default.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Javier Jardón <jjardon@gnome.org>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Loop was accessing one more than bindingCount elements from
pBindings, accessing uninitialized memory.
Fixes: ddc4069122 ("anv: Implement VK_KHR_maintenance3")
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Performance metric numbers are calculated the following way :
- out of the 256 bytes long OA reports, we accumulate the deltas
into an array of uint64_t
- the equations' generated code reads the accumulated uint64_t
deltas and normalizes them for a particular platform
Our hardware is such that a number of counters in the OA reports
always return the same values (i.e. they're not programmable), and
they return the same values even across generations, and as a result a
number of equations are identical in different metric sets across
different generations.
Up to now we've kept the generated code of the equations separated in
different files (per generation/GT), and didn't apply any
factorization of the common equations. We could have make some
improvement by reusing equations within a given metrics file, but we
can go even further and reuse across generations (i.e. all files).
This change changes the code generation to emit a single file in which
we reuse equations emitted code based on the hash of equations'
strings.
Here are the savings in a meson build :
Before(.old)/after :
$ du -h ./build/src/mesa/drivers/dri/libmesa_dri_drivers.so ./build/src/mesa/drivers/dri/libmesa_dri_drivers.so.old
43M ./build/src/mesa/drivers/dri/libmesa_dri_drivers.so
47M ./build/src/mesa/drivers/dri/libmesa_dri_drivers.so.old
$ size build/src/mesa/drivers/dri/libmesa_dri_drivers.so build/src/mesa/drivers/dri/libmesa_dri_drivers.so.old
text data bss dec hex filename
13054002 409424 671856 14135282 d7aff2 build/src/mesa/drivers/dri/libmesa_dri_drivers.so
14550386 409552 671856 15631794 ee85b2 build/src/mesa/drivers/dri/libmesa_dri_drivers.so.old
As a side comment here is the size of the drivers if we remove all of
the metrics from the build :
$ du -sh build/src/mesa/drivers/dri/libmesa_dri_drivers.so
40M build/src/mesa/drivers/dri/libmesa_dri_drivers.so
v2: Fix an issue with hashing of counter equations (Lionel)
Build system rework (Emil)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com> (build system part)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The equation code computes a float (percentage) yet the return type
was an uint64_t.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
==15115== 48 bytes in 1 blocks are definitely lost in loss record 16 of 66
==15115== at 0x4C2EC15: realloc (vg_replace_malloc.c:785)
==15115== by 0x8602C3E: _mesa_reserve_parameter_storage (prog_parameter.c:212)
==15115== by 0x8602D1E: _mesa_add_parameter (prog_parameter.c:252)
==15115== by 0x86032C4: _mesa_add_sized_state_reference (prog_parameter.c:384)
==15115== by 0x8603324: _mesa_add_state_reference (prog_parameter.c:409)
Fixes: edded12376 "mesa: rework ParameterList to allow packing"
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
The previous commit to make DRI3 modifier support optional, breaks with
an updated server and old client.
Make sure we never set multibuffers_available unless we also support it
locally. Make sure we don't call stubs of new-DRI3 functions (or empty
branches) which will never succeed.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Fixes: 7aeef2d4ef ("dri3: allow building against older xcb (v3)")
Noticed while passing by. Not sure if it impacts anything, but
likely to impact GFX9 more than anything else since we lower
inputs, outputs and locals there.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
i965 and gallium handle the atomic buffer index differently. It was
just by luck that the single piglit test for this was passing.
For gallium we use the atomic binding so that we match the handling
in st_bind_atomics().
On radeonsi this fixes the CTS test:
KHR-GL43.shader_storage_buffer_object.advanced-write-fragment
It also fixes tressfx hair rendering in Tomb Raider.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This will only ever be used by gallium drivers so it probably doesn't
belong in the nir toolkit. Also we want to pass it some non NIR
things in the following patch.
To avoid regressions we wrap the lowering calls that have been moved
to st_glsl_to_nir with a quick hack so that they are only called for
radeonsi, we will replace the hack with a check for uniform packing
in a following patch.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
These will be used in the following patch to allow copying directly
to the param list when packing is enabled.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Currently everything is padded to 4 components. Making the list
more flexible will allow us to do uniform packing.
V2 (suggestions from Nicolai):
- always pass existing calls to _mesa_add_parameter() true for padd_and_align
- fix bindless param value offsets
- remove left over wip logic from pad and align code
- zero out param value padding
- whitespace fix
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Will be used to determine whether to take packing code paths or not.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Our register spilling support is nice to have since vc4 couldn't at all,
but we're still very restricted due to needing to not spill during a TMU
operation, or during the last segment of the program (which would be nice
to spill a value of, when there's a long-lived value being passed through
with little modification from the start to the end).
We could do better by emitting unspills for the last-segment values just
before the last thrsw, since the last segment is probably not the maximum
interference area.
Fixes GTF uniform_buffer_object_arrays_of_all_valid_basic_types and 3
others.
We have some cases where in subpass we want the layer but having
it be 0 and loaded in the frag shader without the vertex shader
exporting it is fine.
So don't export the layer if we don't have a value to put in it.
Fixes: d4c74aed7a (radv/multiview: mark layer_input if we have input attachments.)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
If a shader only writes to an output via a constant initializer we
need to lower it before we call nir_remove_dead_variables so that
this pass sees the stores from the initializer and doesn't kill the
output.
Fixes test failures in new work-in-progress CTS tests:
dEQP-VK.spirv_assembly.instruction.graphics.variable_init.output.float
This is ported from anv:
99b57daf4a anv/pipeline: lower constant initializers on output variables earlier
from Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
For multiview we need to emit a number of sequential queries
depending on the view mask.
This avoids dEQP-VK.multiview.queries.15 waiting forever
on the CPU for query results that are never coming.
We only really want to emit one query,
and the rest should be blank (amdvlk does the same),
so we emit begin/end pairs for all the others except
the first query.
v2: fix tests
v3: split out patch.
Fixes: dEQP-VK.multiview.queries*
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This just splits out the begin/end query hw emissions,
it makes it easier to add multiview support for queries.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Since the intermediate states of active_stages are not used,
i.e. active_stages is read only after all stages were set into it,
just set its value before compiling the shaders.
This will allow to conditionally run certain passes based on what
other shaders are being used, e.g. a certain pass might only be
applicable to the vertex shader if there's no geometry or tessellation
shader being used.
v2: Use vk_to_mesa_shader_stage. (Lionel)
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This change allows the disk shader cache to work with programs loaded
with ProgramBinary. Drivers check for LINKING_SKIPPED, and if set,
then they try to use the shader cache.
Since the program loaded by ProgramBinary is similar to loading the
shader from the disk cache, this is probably more appropriate.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Currently, we only look in the disk shader cache if we see that the
shader program is in the cache during the link step.
If the shader cache entry isn't found during the program link, there
are still some (fairly unlikely) scenarios where later it might be
useful to search the cache for gen binary programs.
1. If the cache evicts the serialized glsl cache, there might still be
valid gen program entries in the disk cache.
2. If two applications are running in parallel, then it is possible
that one may write out the cached gen program item which the other
application can then make use of.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
When the shader cache is used, this can be generated. In fact, the
shader cache uses this sha1 to lookup the serialized GL shader
program.
If a GL shader program is restored with ProgramBinary, the shaders are
not available, and therefore the correct sha1 cannot be generated. If
this is restored, then we can use the shader cache to restore the
binary programs to the program that was loaded with ProgramBinary.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
The fragment shader was trying to read this, but nothing
was exporting it from the vertex shader. This handles
it like the prim id export.
Fixes:
dEQP-VK.multiview.secondary_cmd_buffer.*
dEQP-VK.multiview.index.fragment_shader.*
v1.1: updated to use 0x1 (Samuel)
Fixes: e3265c10c8 (radv: Implement multiview draws.)
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
An incorrect formula was used to compute bound_samplers_mask_vs.
Since s is above always 8 for vs and the variable is encoded on 8 bits,
it was always 0.
This resulted in commiting the samplers every call when
there was at least one texture read in the vs shader.
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
We only get VK_SUCCESS if it was initialized, but apparently my compiler
doesn't track that far.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
We only have a cfg != NULL if we went through one of the paths that set
it, but my compiler doesn't figure that out.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 6411defdcd ("intel/cs: Re-run final NIR optimizations for each SIMD size")
This is a legitimate warning: if anv's blorp_alloc_binding_table() throws
an error from anv_cmd_buffer_alloc_blorp_binding_table(), we silently
continue to use this undefined value. The rest of this code doesn't seem
very allocation-error-proof, though, either.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Previously the unit test filled out a minimal devinfo struct. A previous
patch caused the test to begin assert failing because the devinfo was
not complete. Avoid this by using the real mechanism to create devinfo.
Note that we have to drop icl from the table, since we now rely on the
name -> PCI ID translation done by gen_device_name_to_pci_device_id(),
and ICL's PCI IDs are not upstream yet.
Fixes: f89e735719 ("intel/compiler: Check for unsupported register sizes.")
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
I'm not sure everyone wants to be updating their dri3 in a forced
march setting, this allows a nicer approach, esp when you want
to build on distro that aren't brand new.
I'm sure there are plenty of ways this patch could be cleaner,
and I've also not built it against an updated dri3.
For meson I've just left it alone, since if you are using meson
you probably don't mind xcb updates, and if you are using meson
you can fix this better than me.
v3: just don't put a version in for dri3/present without
modifiers, should allow building with 1.11 as well
(feel free to supply meson followups)
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
We're already including it in the meson build. This fixes build issues
on systems which have a drm_fourcc.h that doesn't have modifiers.
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Implement the eglSwapinterval for Android platform to
enable the async mode for some GFX benchmarks such as
Daimler C217, CityBench.
Results of the dEQP-EGL.*swap_interval tests
'dEQP-EGL.functional.query_config.get_config_attrib.max_swap_interval'..
'dEQP-EGL.functional.query_config.get_config_attrib.min_swap_interval'..
'dEQP-EGL.functional.choose_config.simple.selection_only.max_swap_interval'..
'dEQP-EGL.functional.choose_config.simple.selection_only.min_swap_interval'..
'dEQP-EGL.functional.choose_config.simple.selection_and_sort.max_swap_interval'..
'dEQP-EGL.functional.choose_config.simple.selection_and_sort.min_swap_interval'..
'dEQP-EGL.functional.negative_api.swap_interval'..
Test run totals:
Passed: 7/7 (100.0%)
Failed: 0/7 (0.0%)
Not supported: 0/7 (0.0%)
Warnings: 0/7 (0.0%)
Signed-off-by: Zhongmin Wu <zhongmin.wu@intel.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
[Emil Velikov: polish inline comment, add dEQP stats, s/dpy/disp/]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Instead of indirectly pulling the wayland headers everywhere, use
forward declarations and #include only as needed.
Should effectively fix build errors like the following:
make[5]: Entering directory
'/.../src/gallium/state_trackers/omx/tizonia'
CC h264dprc.lo
In file included from h264dprc.c:45:0:
.../src/egl/drivers/dri2/egl_dri2.h:47:10: fatal error:
wayland/wayland-egl/wayland-egl-backend.h: No such file or directory
#include "wayland/wayland-egl/wayland-egl-backend.h"
Cc: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Tested-by: Andy Furniss <adf.lists@gmail.com>
During development the version was bumped, yet the comment did not get
an update.
Fixes: c80c08e226 ("vulkan/wsi/x11: Add support for DRI3 v1.2")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
According to OpenGL ES 3.2, section 8.6, CopyTexSubImage* should return
an INVALID_OPERATION if the internalformat of the texture is RGB9_E5.
This fixes
dEQP-GLES31.functional.debug.negative_coverage.*.copytexsubimage2d_texture_internalformat.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
This pass moves load UBO operations just before their first use,
loosely based on nir_opt_move_comparisons.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This drops one of the geometry specific user sgprs,
we can work this out at compile time.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This moves the lds_size calcs into the shader so we have all
the size stuff in one file.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This drops the now unneeded scanning and results in favour
of the ones in the info.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Instead of recalculating the value, use the shader calculated value.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This gathers the ls outputs written by the vertex shader,
and the tcs outputs, these are needed to calculate certain
tcs parameters.
These have to be separate for combined gfx9 shaders.
This is a bit pessimistic compared to the nir pass,
as we don't work out the individual slots for tcs outputs,
but I actually thing it should be fine to just mark the whole
thing used here.
v2: move to radv, handle clip dist (Samuel),
handle compacts and patchs properly.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just moves this function to an inline so the shader_info
pass can use it.
v2: use inline (Samuel)
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
[123/227] Compiling C object 'src/mesa/drivers/dri/i965/libi965_gen110@sta/genX_blorp_exec.c.o'.
../src/mesa/drivers/dri/i965/genX_blorp_exec.c:99:1: warning: ‘blorp_get_surface_base_address’ defined but not used [-Wunused-function]
blorp_get_surface_base_address(struct blorp_batch *batch)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
[84/227] Compiling C object 'src/intel/vulkan/libanv_gen110@sta/genX_blorp_exec.c.o'.
../src/intel/vulkan/genX_blorp_exec.c:68:1: warning: ‘blorp_get_surface_base_address’ defined but not used [-Wunused-function]
blorp_get_surface_base_address(struct blorp_batch *batch)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
If AMD_shader_info or RADV_TRACE_FILE is used we might need to
keep trace of LLVM IR.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Just to be sure all options are enabled when trying to generate
a hang report.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
So now, during spirv_to_nir, it uses the capability instead of the
extension. Note that we are really doing here is treating
SPV_AMD_gcn_shader as other supported extensions. SPV_AMD_gcn_shader
is not the first SPV extension supported. For example, the capability
draw_parameters infers if the extension SPV_KHR_shader_draw_parameters
is supported or not.
This could be seen as counter-intuitive, and that it would be easier
to define which extensions are supported, and based our checks on
that, but we need to take into account that some capabilities are
optional from core, and others came from new extensions.
Also this commit would make the implementation of ARB_spirv_extensions
easier.
v2: AMD_gcn_shader capability renamed to gcn_shader (Daniel Schürmann)
Reviewed-by: Daniel Schürmann <daniel.schuermann@campus.tu-berlin.de>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
We don't need anymore the source and destination's data type, just
their bitsize.
v2:
- Use glsl_get_bit_size () instead (Jason).
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
There are some SPIRV opcodes (like UConvert and SConvert) have some
expectations of the output that doesn't depend on the operands
data type. Generalize the solution of all of them.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
sched_yield is used but the include reference on Darwin is missing. This patch
conditionally guards on Darwin/OSX to import sched.h first.
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
The implementation for bootstrapping SWR on Darwin targets is based on the Linux version.
Instead of reading the output of /proc/cpuinfo, sysctlbyname is used to determine the
physical identifiers, processor identifiers, core counts and thread-processor affinities.
With this patch, it is possible to use SWR as an alternate renderer on OSX to softpipe and
llvmpipe.
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
This fixes an illegal command buffer on the host seen with
piglit arb_internalformat_query2-max-dimensions
Signed-off-by: Dave Airlie <airlied@redhat.com>
Add them as usable for textures, so they can be used by
Wayland drm in 10 bpc mode and for X11 compositing under
GLX and EGL. We need these formats to be supported at
least for sampling, otherwise GLX_texture_from_pixmap
and the equivalent EGL image extension won't work with
X11 drawables of depth 30 and just display an all black
window.
Do not expose these formats as renderable, and thereby
not as a fbconfig/EGLConfig/Visual, as NVidia hw does
not support 10 bpc unorm formats without alpha channel.
Tested under X11 + GLX/EGL + DRI2/DRI3 for compositing,
and under Wayland+Weston drm backend with a Tesla and
Pascal gpu.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Walking the whole hash table, inserting entries by hashing them first
is just a really bad idea. We can simply memcpy the whole thing.
V2: Remove leftover creation of acp in two places
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
V2: Don't rzalloc; we are about to rewrite the whole thing (Vladislav)
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This fixes the following build breakage:
make[5]: Entering directory
'/mnt/sdc1/Gits/mesa/src/gallium/state_trackers/omx/tizonia'
CC h264dprc.lo
In file included from h264dprc.c:45:0:
../../../../../src/egl/drivers/dri2/egl_dri2.h:47:10: fatal error:
wayland/wayland-egl/wayland-egl-backend.h: No such file or directory
#include "wayland/wayland-egl/wayland-egl-backend.h"
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
meson got the same fix in 7598dedfde.
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
OpenCL kernels also have int8/uint8.
v2: remove changes in nir_search as Jason posted a patch for that
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
From the spec:
"When copying between compressed and uncompressed formats the
extent members represent the texel dimensions of the source
image and not the destination."
However, as per 7b890a36, we must still use the destination image type
when clamping the extent so that we copy the correct number of layers
for 2D to 3D copies.
Fixes: 7b890a36 "radv: Fix vkCmdCopyImage for 2d slices into 3d Images"
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This fixes CTS:
dEQP-VK.api.device_init.create_device_queue2_unmatched_flags
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@gmail.com>
The code to handle mat multiplication by a scalar tries to pick either
imul or fmul depending on whether the matrix is float or integer.
However it was doing this by checking whether the base type is float.
This was making it choose the int path for doubles (and presumably
float16s).
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
af5f2322d0 addressed this for extension commands, but the spec mandates
this behavior also for core API commands. From the Vulkan spec,
Table 2. vkGetDeviceProcAddr behavior:
device pname return
----------------------------------------------------------
(..)
device core device-level command fp
(...)
See that it specifically states "device-level".
Since the vk.xml file doesn't state if core commands are instance or
device level, we identify device level commands as the ones that take a
VkDevice, VkQueue or VkCommandBuffer as their first parameter.
Fixes test failures in new work-in-progress CTS tests.
Also see the public issue:
https://github.com/KhronosGroup/Vulkan-LoaderAndValidationLayers/issues/2323
v2:
- Include reference to github issue (Emil)
- Rebased on top of Vulkan 1.1 changes.
v3:
- Remove the not in the condition and switch the then/else cases (Jason)
Reviewed-by: Emil Velikov <emil.velikov@collabora.com> (v1)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The spec is pretty clear that this can be 0, and that it operates
as a reserved binding.
Fixes:
dEQP-VK.binding_model.descriptor_update.empty_descriptor.uniform_buffer
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
sched_yield is used but the include reference on Darwin is missing. This patch
conditionally guards on Darwin/OSX to import sched.h first.
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
The implementation for bootstrapping SWR on Darwin targets is based on the Linux version.
Instead of reading the output of /proc/cpuinfo, sysctlbyname is used to determine the
physical identifiers, processor identifiers, core counts and thread-processor affinities.
With this patch, it is possible to use SWR as an alternate renderer on OSX to softpipe and
llvmpipe.
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
If a src was referencing the same temp as the dst, the per-component
copy code didn't work.
e.g.
cndge r0.xy, r0.xx, |r2|, r3
got expanded into
mov r12.x, |r2|
cndge r0.x, r0.x, r12, r3
mov r12.y, |r2|
cndge r0.y, r0.x, r12, r3
hence for the second cndge r0.x was mistakenly the previous cndge result.
Fix this by doing all the movs first, so there's no bogus alu.last in between.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=102905
Tested-by: <iive@yahoo.com>
Reviewed-by: Dave Airlie <airlied@gmail.com>
I was going to have to add another parameter to this monster,
so we should just pass the nir_variable in, I can't find any
reason this would be a bad idea.
This needed for the next fix.
Fixes: 94f9591995 (radv/ac: add support for TCS/TES inputs/outputs.)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This seems more correct to me, since if we have an array
of floats they'll be vec4 aligned, and if we do af[2],
we want the const index to increase by 2 slots in the non
compact case.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105464
Fixes: 94f9591995 (radv/ac: add support for TCS/TES inputs/outputs.)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Meson is pretty well tested and works in most configurations now, so we
can remove the warning about it being unsuited for actual use.
It's also worth documenting that meson 0.42.0 or greater is required.
v2: - Minor rewording of supported platforms as suggested by Emil
- Add two missing tags as reported by xmllint --html
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com> (v1)
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> (v1)
This is based heavily on 97f10934ed, "ac/nir: Add vote_ieq/vote_feq
lowering pass." from Bas Nieuwenhuizen. This version is a bit more
general since it's in common code. It also properly handles NaN due to
not flipping the comparison for floats.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Meson's compiler.has_header is completely useless, it only checks that a
header exists, not whether it's usable. This creates problems if a
header contains a conditional #error declaration, like so:
> #if __x86_64__
> # error "Doesn't work with x86_64!"
> #endif
Compiler.has_header will return true in this case, even when compiling
for x86_64. This is useless.
Instead, we'll do a compile check so that any #error declarations will
be treated as errors, and compilation will work.
Fixes compilation on x32 architecture.
Gentoo Bugzilla: https://bugs.gentoo.org/show_bug.cgi?id=649746
meson bug: https://github.com/mesonbuild/meson/issues/2246
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Acked-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
This is a terrible hack but it fixes CTS regressions. It's still
incredibly unclear exactly what is going wrong in the hardware to cause
this to be an issue so this isn't a good fix by any means. However, it
does fix tests so there is that.
Fixes: fb0e9b5197 "i965: Track the depth and render caches separately"
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103746
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
It would be nice to support perfmon with simulator, and might be a useful
tool for regression testing performance (since the simulator would be
deterministic).
Now the "ac/nir" prefix will really be the shared code between
RadeonSI and RADV, that might avoid confusions in the future.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Calling __builtin_frame_address with a nonzero argument is unsafe
but is sometimes done for debugging purposes. Since this code is
part of some debug util code I'm assuming that is the case here
and using GCC pragma to silence the warning.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
With some sets of optimization flags, GCC will generate warnings like
this:
src/mesa/main/texparam.c:2327:27: warning: ‘*((void *)&ip+12)’ may be used uninitialized in this function [-Wmaybe-uninitialized]
params[3] = ip[3];
~~^~~
src/mesa/main/texparam.c:2320:16: note: ‘*((void *)&ip+12)’ was declared here
GLint ip[4];
^~
ip is not initialized in cases where a GL error is generated. In these
cases, we should *not* write to the user's buffer, so this is actually a
bug. I wrote a new piglit test gl-3.0-texparameteri to show this bug.
I suspect that Coverity also detected this, but the scan site is
currently down.
Fixes: c2c507786 "main: Added entry points for glGetTextureParameteriv, Iiv, and Iuiv."
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This is similar to commit 90633079. libtool links first to system directories
instead of custom locations of libdrm on relinking. Since a more recent libdrm
version than the one provided by the system is often needed when compiling
mesa, make sure this works by putting libdrm in front.
See also: https://bugs.freedesktop.org/show_bug.cgi?id=100259
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The tool accepts the input and output files as arguments.
There's no need for the redirection.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
The tool accepts the input and output files as arguments.
There's no need for the redirection.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
The tool accepts the input and output files as arguments.
There's no need for the redirection.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
The extension was never implemented. Quick search suggests:
- no actual users (on my Arch setup)
- the Nvidia driver does not implement the extension
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Acked-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The extension was never implemented. Quick search suggests:
- no actual users (on my Arch setup)
- the Nvidia driver does not implement the extension
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Acked-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The extension was never implemented. Quick search suggests:
- no actual users (on my Arch setup)
- the Nvidia driver does not implement the extension
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Acked-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The extension was never implemented. Quick search suggests:
- no actual users (on my Arch setup)
- the Nvidia driver does not implement the extension
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Acked-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The extension was never implemented. Quick search suggests:
- no actual users (on my Arch setup)
- the Nvidia driver does not implement the extension
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Acked-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The extension was never implemented. Quick search suggests:
- no actual users (on my Arch setup)
- the Nvidia driver does not implement the extension
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Acked-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The vulkan API is not ideal as it does not allow us have a
shared limit.
Feral needs 15+6 for one of their games, and I'm not a fan
of overcommitting the limits, so increase the number of
dynamic uniform buffers to 16.
CC: <mesa-stable@lists.freedesktop.org>
CC: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This fixes a memory trashing crash (not the test) seen with
dEQP-GLES3.stress.draw.unaligned_data.random.203
on virgl.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is ported from the sb backend, there are some issues with
evergreen stacks on the boundary between entries and ALU_PUSH_BEFORE
instructions.
Whenever we are going to use a push before, we check the stack
usage and if we have to use the workaround, then we switch to
a separate push.
I noticed this problem dealing with some of the soft fp64 shaders,
in nosb mode, they are quite stack happy.
This fixes all the glitches and inconsistencies I've seen with them
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Tested-by: Elie Tournier <elie.tournier@collabora.com>
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes following dependency problem:
Native dependency xcb-dri3 found: NO found '1.11' but need: '>= 1.13'
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Fixes: c80c08e226 ("vulkan/wsi/x11: Add support for DRI3 v1.2")
Instead of keeping a copy of the vertex array content in
struct gl_vertex_array only keep pointers to the first order
information originaly in the VAO.
For that represent the current values by struct gl_array_attributes
and struct gl_vertex_buffer_binding.
v2: Change comments.
Remove gl... prefix from variables except in the i965 directory where
it was like that before. Reindent because of that.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
The logic would not work correctly for line lengths smaller than 1.0,
even a degenerated line with length 0 would still produce a fragment
with anyhwere between alpha 0.0 and 0.5.
Reviewed-by: Brian Paul <brianp@vmware.com>
Ken suggested that we might be underallocating scratch space on HD
400. Allocating scratch space as though there was actually 8 EUs
seems to help with a GPU hang seen on synmark CSDof.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tested by our OpenCL team.
Fixes: 9c499e6759 "st/mesa: don't invoke st_finalize_texture & st_convert_sampler for TBOs"
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Like the r600 paths to use other custom states, we pass in a couple of
parameters to customize the innards of the blitter. It's up to the caller
to wrap other state necessary for its shaders (for example, constant
buffers for the uniforms the shader uses).
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
If PresentCompleteNotify event says the pixmap was presented
with mode PresentCompleteModeSuboptimalCopy, it means the pixmap
could possibly have been flipped instead if allocated with a
different format/modifier.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Add support for DRI3 v1.1, which allows pixmaps to be backed by
multi-planar buffers, or those with format modifiers. This is both
for allocating render buffers, as well as EGLImage imports from a
native pixmap (EGL_NATIVE_PIXMAP_KHR).
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
When it is detected that a window could have been flipped
but has been copied because of suboptimal format/modifier.
The Vulkan client should then re-create the swapchain.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Adds support for multiple planes and buffer modifiers.
v4: Rename "has_dri3_v1_1" to "has_dri3_modifiers"
v12: Multi-planar/modifier support is now DRI3 v1.2; also update release
versions
We were dropping the upper 32 bits, which caused assertion failures in
some compute shader piglit tests with radeonsi since the commit below.
Fixes: 752e969703 ("compiler: Add two new system values for subgroups")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This is useful for archrast data collection. This greatly speeds up the
post processing script since there is significantly less events generated.
Finally, this is a simpler option to communicate to users than having
them directly adjust MAX_PRIMS_PER_DRAW and MAX_TESS_PRIMS_PER_DRAW.
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
In the API event handler we want to share information between the core
layer and the API. Specifically, around associating various ids with
different kinds of events. For example, associate render pass id with
draw ids, or command buffer ids with draw ids.
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Vivante hardware supports this just fine. There is no reason why this shouldn't
be advertised as a valid combination.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
This allows the driver to be built on a make distcheck and makes sure
that it properly builds when a distribution tarball is made.
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra K1 and later use a GPU that can be driven by the Nouveau driver.
But the GPU is a pure render node and has no display engine, hence the
scanout needs to happen on the Tegra display hardware. The GPU and the
display engine each have a separate DRM device node exposed by the
kernel.
To make the setup appear as a single device, this driver instantiates
a Nouveau screen with each instance of a Tegra screen and forwards GPU
requests to the Nouveau screen. For purposes of scanout it will import
buffers created on the GPU into the display driver. Handles that
userspace requests are those of the display driver so that they can be
used to create framebuffers.
This has been tested with some GBM test programs, as well as kmscube and
weston. All of those run without modifications, but I'm sure there is a
lot that can be improved.
Some fixes contributed by Hector Martin <marcan@marcan.st>.
Changes in v2:
- duplicate file descriptor in winsys to avoid potential issues
- require nouveau when building the tegra driver
- check for nouveau driver name on render node
- remove unneeded dependency on libdrm_tegra
- remove zombie references to libudev
- add missing headers to C_SOURCES variable
- drop unneeded tegra/ prefix for includes
- open device files with O_CLOEXEC
- update copyrights
Changes in v3:
- properly unwrap resources in ->resource_copy_region()
- support vertex buffers passed by user pointer
- allocate custom stream and const uploader
- silence error message on pre-Tegra124
- support X without explicit PRIME
Changes in v4:
- ship Meson build files in distribution tarball
- drop duplicate driver_tegra dependency
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Andre Heider <a.heider@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This adds support for framebuffer modifiers to Nouveau. This will be
used by the Tegra driver to share metadata about the format of buffers
(such as the tiling mode or compression).
Changes in v2:
- remove unused parameters to nouveau_buffer_create()
- move format modifier query code to nvc0 backend
- restrict format modifiers to 2D textures
- implement ->query_dmabuf_modifiers()
Changes in v4:
- add UAPI include path on meson builds
Changes in v5:
- remove unnecessary includes
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Andre Heider <a.heider@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a new macro that can be used to extract the tiling mode from a
tile_mode value. This is will be used to determine the number of GOBs
used in block linear mode.
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Andre Heider <a.heider@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The existing format modifier definitions were merged prematurely, and
recent work has unveiled that the definitions are suboptimal in several
ways:
- The format specifiers, except for one, are not Tegra specific, but
the names don't reflect that.
- The number space is split into two, reserving 32 bits for some
"parameter" which most of the modifiers are not going to have.
- Symbolic names for the modifiers are not using the standard
DRM_FORMAT_MOD_* prefix, which makes them awkward to use.
- The vendor prefix NV is somewhat ambiguous.
Fortunately, nobody's started using these modifiers, so we can still fix
the above issues. Do so by using the standard prefix. Also, remove TEGRA
from the name of those modifiers that exist on NVIDIA GPUs as well. In
case of the block linear modifiers, make the "parameter" smaller (4
bits, though only 6 values are valid) and don't let that leak into any
of the other modifiers.
Finally, also use the more canonical NVIDIA instead of the ambiguous NV
prefix.
This is based on commit 268892cb63a822315921a8dab48ac3e4abf7dd03 from
Linux v4.16-rc1.
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Avoid a compiler warnings when the val parameter is an expression.
This is based on commit 5843f4e02fbe86a59981e35adc6cabebee46fdc0 from
Linux v4.16-rc1.
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Bit 0 enables VSRC0 (R in low bits, G high) and bit 2 enables
VSRC1 (B in low bits, A high).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
If the api version is too low, the loader clamps the application
requested version to the advertized version, which messes with
which extensions are enabled.
Reviewed-by: Dave Airlie <airlied@redhat.com>
If the previously seen instruction generates more fields than the new
instruction, still allow CSE to happen. This doesn't do much, but it
also enables a couple more shaders in the next patch. It helped quite a
bit in another change series that I have (at least for now) abandoned.
v2: Add some extra comentary about the parameters to instructions_match.
Suggested by Ken.
No changes on Skylake, Broadwell, Iron Lake or GM45.
Ivy Bridge and Haswell had similar results. (Ivy Bridge shown)
total instructions in shared programs: 11780295 -> 11780294 (<.01%)
instructions in affected programs: 302 -> 301 (-0.33%)
helped: 1
HURT: 0
total cycles in shared programs: 257308315 -> 257308313 (<.01%)
cycles in affected programs: 2074 -> 2072 (-0.10%)
helped: 1
HURT: 0
Sandy Bridge
total instructions in shared programs: 10506687 -> 10506686 (<.01%)
instructions in affected programs: 335 -> 334 (-0.30%)
helped: 1
HURT: 0
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2 (idr): Don't allow CSEL with a non-float src2.
v3 (idr): Add CSEL to fs_inst::flags_written. Suggested by Matt.
v4 (idr): Only set BRW_ALIGN_16 on Gen < 10 (suggested by Matt). Don't
reset the access mode afterwards (suggested by Samuel and Matt). Add
support for CSEL not modifying the flags to more places (requested by
Matt).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> [v3]
Reviewed-by: Matt Turner <mattst88@gmail.com>
This is only required with the latest libdrm.
This fixes 32-bit support with high addresses.
(and possibly 64-bit support too because the high bits need to be masked out)
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
It should be possible to build EGL without GLX, but the meson build
currently doesn't allow that because it too tightly couples glx and dri.
This patch eases dri and glx apart, so that EGL without GLX can be
built.
CC: Daniel Stone <daniels@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
The meson build file for Apple GLX is not listed in the EXTRA_DIST make
variable and therefore isn't shipped as part of the release tarball, so
meson builds from the tarball will fail.
Add the file to EXTRA_DIST to ensure it is included in the tarball.
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Null exports should only be needed when no other exports are
emitted. This removes a bunch of 'exp null off, off, off, off done vm'.
Affected games are Dota 2 and Wolfenstein 2, not sure if that
really helps, but code size is decreasing there.
Polaris10:
Totals from affected shaders:
SGPRS: 8216 -> 8216 (0.00 %)
VGPRS: 7072 -> 7072 (0.00 %)
Spilled SGPRs: 0 -> 0 (0.00 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Code Size: 454968 -> 453896 (-0.24 %) bytes
Max Waves: 772 -> 772 (0.00 %)
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
With this extension enabled and a server GLX implementation that actually
honors it, Window movement lags considerably on gnome-shell/vmware, so
disable it by default.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Drivers on virtual hardware don't want to expose this extension to
GLX compositors, similarly to GLX_OML_sync_control, since that significantly
increases latency.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
These helpers insert the basic block in the same order as they
appear in NIR making it easier to follow LLVM IR dumps. The helpers
also insert more useful labels onto the blocks.
TGSI use the line number of the corresponding opcode in the TGSI
dump as the label id, here we use the corresponding block index
from NIR.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This re-adds the auto option for omx, without it we default to tizonia
and the build fails almost immediately, this is especially obnoxious
those building a driver that doesn't support the OMX state tracker to
begin with.
v2: - Only define OMX_FOO for auto cases if the dependencies are found.
This fixes building tizonia with auto (Julien, Eric)
CC: Gurkirpal Singh <gurkirpal204@gmail.com>
Fixes: bb5e27fab6
("st/omx/bellagio: Rename st and target directories")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Jon Turney <jon.turney@dronecode.org.uk> (v1)
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Tested-by: Julien Isorce <julien.isorce@gmail.com>
Tested-by: Karol Herbst <kherbst@redhat.com> (v1)
In contrast to non-aa, where stippling is based on either dx or dy
(depending on if it's a x or y major line), stippling is based on
actual distance with smooth lines, so adjust for this.
(It looks like there's some minor artifacts with mesa demos
line-sample and stippling, it looks like the line endpoints
aren't quite right with aa + stippling - maybe due to the
integer math in the stipple stage, but I can't quite pinpoint it.)
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
The motivation actually was to get rid of the additional tex
instruction, since that requires the draw fallback code to intercept
all sampler / view calls (even if the fallback is never hit).
Basically, the idea is to use coverage of the pixel to calculate
the alpha value, and coverage is simply based on the distance
to the center of the line (in both line direction, which is useful
for wide lines, as well as perpendicular to the line).
This is much closer to what hw supporting this natively actually does.
It also fixes an issue with line width not quite being correct, as
well as endpoints getting stretched too far (in line direction) with
wide lines, which is apparent with mesa demo line-sample.
(For llvmpipe, it would probably make sense to do something like this
directly when drawing lines, since rendering two tris is twice as
expensive as a line, but it would need some changes with state
management.)
Since we're no longer relying on mipmapping to get the alpha value,
we also don't need to draw 3 rects (6 tris), one is sufficient.
There's still issues (as before):
- quite sure it's not correct without half_pixel_center, but can't test
this with GL.
- aaline + line stipple is incorrect (evident with line-sample demo).
Looking at the spec the stipple pattern should actually be based on
distance (not just dx or dy for x/y major lines as without aa).
- outputs (other than pos + the one used for line aa) should be
reinterpolated since we actually increase line length by half a pixel
(but there's no tests which would care).
v2: simplify the math (should be equivalent), don't need immediate
v3: use float versions of atan2,cos,sin, minor cleanups
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
The old vote_eq implementation supported only booleans, but now
we have to support arbitrary values, so use the read_first_invocation
intrinsic + ballot.
I took this as an opportunity to figure out how easy it was to do this
in nir instead of in the nir_to_llvm pass, and it actually turned out
pretty okay IMO. Only creating the pass is some extra code.
Reviewed-by: Dave Airlie <airlied@redhat.com>
This requires us to bump the subgroup size to 32 for all shader stages
because Vulkan requires that to be a physical device query.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
NIR has code to lower these away for us but we can do significantly
better in many cases with register regioning and SIMD4x2.
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
This commit adds a helper to the builder for emitting "scan" operations.
Given a binary operation #, a scan takes the vector [a0, a1, ..., aN]
and returns the vector [a0, a0 # a1, ..., a0 # a1 # ... # aN] where each
channel contains the combination of all previous channels. The sequence
of instructions to perform the scan is fairly optimal; a 16-wide scan on
a 32-bit type is only 6 instructions. The subgroup scan and reduction
operations will be implemented in terms of this.
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
The SPIR-V extension wants us to be able to do an AllEqual on any vector
or scalar type. This has two implications:
1) We need to be able to handle vectors so we switch the vote_eq
intrinsics to be vectorized intrinsics.
2) We need to handle floats which have different behavior with respect
to +-0, NaN, etc. than the integer variant so we need two variants.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Someone can make the lowering optional later if they want something
different for their hardware.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
From the Vulkan 1.1 spec:
"Vulkan 1.0 implementations were required to return
VK_ERROR_INCOMPATIBLE_DRIVER if apiVersion was larger than 1.0.
Implementations that support Vulkan 1.1 or later must not return
VK_ERROR_INCOMPATIBLE_DRIVER for any value of apiVersion."
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
This is not strictly necessary since users should not be requesting any
flags that are not valid for the list of enabled features requested and
we already fail if they attempt to use an unsupported feature, however
it is an easy to implement sanity check that would help developes realize
that they are doing things wrong, so we might as well do it.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
From the Vulkan 1.1 spec, VkDeviceQueueInfo2 structure:
"The queue returned by vkGetDeviceQueue2 must have the same flags value
from this structure as that used at device creation time in a
VkDeviceQueueCreateInfo instance. If no matching flags were specified
at device creation time then pQueue will return VK_NULL_HANDLE."
For us this means no flags at all since we don't support any.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This belongs to the protected memory feature but there's nothing about
it that's specific to protected memory.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This is part of the device groups extension/feature but it's a decent
chunk of work in its own right so it's worth breaking into its own
patch. The mechanism we use is fairly straightforward: we just push the
base work group id into the shader and add it to the work group id we
get from dispatch.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
This advertises the VK_KHR_shader_draw_parameters functionality as a
"core optimal feature" in Vulkan 1.1.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
This requires us to rename any Vulkan API entrypoints which became core
in 1.1 to no longer have the KHR suffix.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
In this case, we say an entrypoint is supported if ANY of the extensions
is supported. This is because, in the XML, entrypoints don't require
extensions so much as extensions require entrypoints.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
The original string map assumed that the mapping from strings to
entrypoints was a bijection. This will not be true the moment we
add entrypoint aliasing. This reworks things to be an arbitrary map
from strings to non-negative signed integers. The old one also had a
potential bug if we ever had a hash collision because it didn't do the
strcmp inside the lookup loop. While we're at it, we break things out
into a helpful class.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Our previous handling of barriers always used the big hammer and didn't
correctly emit memory barriers when specified along with a control
barrier. This commit completely reworks the way we emit barriers to
make things both more precise and more correct.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
When looking up known glsl_type instances in the various hash tables, we
end up leaking the key instances used for the lookup, as the glsl_type
constructor allocates memory on the global mem_ctx. This patch changes
glsl_type to manage its own memory, which fixes the leak and also allows
getting rid of the global mem_ctx and its mutex.
v2: remove lambda usage (Tapani)
(+keep ASSERT_BITFIELD_SIZE, modify dummy ctor to initialize mem_ctx)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104884
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Simon Hausmann <simon.hausmann@qt.io>
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This capability allows gl_ViewportIndex and gl_Layer to also be used
as outputs in Vertex and Tesselation shaders.
v2: Make conditional to the capability, add gl_Layer, add tesselation
shaders. (Iago)
v3: Don't export to tesselation control shader.
v4: Add Reviewd-by tag.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Fixes the following building errors:
external/mesa/src/intel/vulkan/anv_device.c:300: error: undefined reference to 'gen_get_pci_device_id_override'
external/mesa/src/intel/vulkan/anv_device.c:312: error: undefined reference to 'gen_get_device_name'
external/mesa/src/intel/vulkan/anv_device.c:313: error: undefined reference to 'gen_get_device_info'
clang.real: error: linker command failed with exit code 1 (use -v to see invocation)
Fixes: 272bef0601 "intel: Split gen_device_info out into libintel_dev"
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
This reverts commit 2d36efdb7f.
This raised limit turns out to harmful for more complex shaders,
it causes excessive spilling in some Bioshock Infinite shaders.
The fps for the ssao demo on radv remains unchanged when reverting
this.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
If it's zero but put it in args we still end up consuming a
register for it.
This fixes some spilling in the NIR paths in Dirt Rally that
isn't seen with TGSI.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
These transformations are inexact because section 4.7.1 (Range and
Precision) says:
Operations and built-in functions that operate on a NaN are not
required to return a NaN as the result.
The fmin or fmax might not return NaN in cases where the original
expression would be required to return NaN.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This transformation is inexact because section 4.7.1 (Range and
Precision) says:
Operations and built-in functions that operate on a NaN are not
required to return a NaN as the result.
The fmin or fmax might not return NaN in cases where the original
expression would be required to return NaN.
v2: Reorder operands and mark as inexact. The latter suggested by
Jason.
shader-db results:
Haswell, Broadwell, and Skylake had similar results. (Skylake shown)
total instructions in shared programs: 14514817 -> 14514808 (<.01%)
instructions in affected programs: 229 -> 220 (-3.93%)
helped: 3
HURT: 0
helped stats (abs) min: 1 max: 4 x̄: 3.00 x̃: 4
helped stats (rel) min: 2.86% max: 4.12% x̄: 3.70% x̃: 4.12%
total cycles in shared programs: 533145211 -> 533144939 (<.01%)
cycles in affected programs: 37268 -> 36996 (-0.73%)
helped: 8
HURT: 0
helped stats (abs) min: 2 max: 134 x̄: 34.00 x̃: 2
helped stats (rel) min: 0.02% max: 14.22% x̄: 3.53% x̃: 0.05%
Sandy Bridge and Ivy Bridge had similar results. (Ivy Bridge shown)
total cycles in shared programs: 257618409 -> 257618403 (<.01%)
cycles in affected programs: 12582 -> 12576 (-0.05%)
helped: 3
HURT: 0
helped stats (abs) min: 2 max: 2 x̄: 2.00 x̃: 2
helped stats (rel) min: 0.05% max: 0.05% x̄: 0.05% x̃: 0.05%
No changes on Iron Lake or GM45.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v2: Refactor out screen functions to st/omx
Allows to keep all the code under st/omx (st/omx/tizonia and
st/omx/bellagio).
Reverts targets/omx_bellagio to omx as additions to existing files
is enough to compile for both bellagio and tizonia.
* autotools changes:
--enable-omx -> --enable-omx-bellagio
* meson changes:
-Dgallium-omx=false -> -Dgallium-omx=disabled
-Dgallium-omx=true -> -Dgallium-omx=bellagio
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Julien Isorce <julien.isorce@gmail.com>
This allows us to generate, for example,
"exp param0 v0, off, off, off" if only the first channel is needed.
Not sure if this improves performance but it's worth trying.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
When the mask is not 0xf we need to update the number of
enabled channels, otherwise the hardware won't emit the
components that are combined.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Currently, it's always 0xf but an upcoming patch will reduce the
number of channels for parameters export.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This adds a missing library to the i965/Android.mk file, and updates
intel/Android.mk to include the new library. Without this, mesa does not
build on Android.
Fixes: 272bef0601 "intel: Split gen_device_info out into
libintel_dev"
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
On Android surface/swapchain extensions are implemented by the loader. Patch
modifies both anv and radv extension scripts disabling currently exposed
ones. See also earlier commit 9f763c1f9b.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Just like commit 2ffe395 does for radv.
Fixes following dEQP test on i965:
dEQP-VK.api.info.android.no_unknown_extensions
v2: make it !ANDROID since this extension is not about
surfaces/swapchain
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Some state trackers require 128.
(There are no plans to increase PIPE_MAX_SAMPLERS too, since with gl
state tracker it's unlikely more than 32 will be needed, if you need
more use bindless.)
The comment said it will only represent the lowest 32 regs. This was
not entirely true in practice, since at least on x86 you'll get
masked shifts (unless the compiler could recognize it already and toss
it out). It turns out this actually works out alright (presumably
noone uses it for temp regs) when increasing max sampler views, so
make that behavior explicit.
Albeit it feels a bit hacky (but in any case, explicit behavior there
is better than undefined behavior).
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Useful for testing API, builtin library, and device completeness of
not-yet-supported versions.
Signed-off-by: Aaron Watry <awatry@gmail.com>
Reviewed-by: Pierre Moreau <pierre.morrow@free.fr>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
(v3) Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Jan Vesely <jan.vesely@rutgers.edu>
v4: Remove redundant std::string wrapper around debug_get_option calls
v3: mark CL version overrides as static and const
v2: Make version_string in platform const in case
We'll need to be able to detect device version to define the appropriate
__OPENCL_VERSION__ header.
v2: Rebase after removing the previous patch (Pierre)
- Removed "clover: Add device_clc_version to llvm::create_compiler_instance"
Signed-off-by: Aaron Watry <awatry@gmail.com>
Reviewed-by: Pierre Moreau <pierre.morrow@free.fr>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
We'll be using dev.device_clc_version to select the default language version
soon along with the existing ir_target field.
Signed-off-by: Aaron Watry <awatry@gmail.com>
Reviewed-by: Pierre Moreau <pierre.morrow@free.fr>
Reviewed-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
v4: Pass the device down instead of device_clc_version as a separate field
v3: Revise to acknowledge that we now have the device in compile/link_program
instead of the string values.
v2: (Pierre) Move changes to create_compiler_instance invocation to correct
patch to prevent temporary build breakage.
(Jan) Use device_clc_version instead of device_version for compile/link
Copying the individual fields from the device when compiling/linking
will lead to an unnecessarily large number of fields getting passed
around.
v3: Rebase on current master
v2: Use device in function args before making additional changes in
following patches
Signed-off-by: Aaron Watry <awatry@gmail.com>
Reviewed-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Pierre Moreau <pierre.morrow@free.fr>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Currently both users of this would overflow an array when the
input was a dual slot double as they expected the number of
components to be a max of 4.
Since we pass the type we can just let the functions handle
doubles in a way they choose.
Reviewed-by: Dave Airlie <airlied@redhat.com>
All the tess shader and tgsi equivalents are here and it allows
use to use llvm_type_is_64bit() in the following patch without
exposing it externally.
Reviewed-by: Dave Airlie <airlied@redhat.com>
The V3D engine provides several perf counters.
Implement ->get_driver_query_[group_]info() so that these counters are
exposed through the GL_AMD_performance_monitor extension.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
We want people to be using ISL_FORMAT_*, rather than the genxml format
enumerations. This patch drops 10 separate copies, and drops a bunch
of ugly casting.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
[jordan.l.justen@intel.com: Minor changes for rebase]
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Split out the device info so isl doesn't depend on intel/common. Now
it will depend on the new intel/dev device info lib.
This will allow the decoder in intel/common to use isl, allowing us to
apply Ken's patch that removes the genxml duplication of surface
formats.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Some instructions, assume src and/or dst is half-precision based on a
type field (ie. f32/s32/u32 are full precision but others are half
precision). So add some code to sanity check the src/dst registers to
catch mixups.
Also propagate half-precision flag for SSA sources. The instruction
consuming a SSA value needs to be of the same type as the one producing
it.
This is probably not complete half-precision support, but a useful first
step. We do still need to add support for nir alu instructions for
converting between half/full precision.
Signed-off-by: Rob Clark <robdclark@gmail.com>
It isn't just vertex shaders that need to fixup reg footprint for inputs
populated before shader starts.
This problem showed up with compute shaders. If you have (for example)
a localregid sysval, but only the .x component is used, the hw still
writes the .yz components, which could overflow into other threads
causing corruption. Showed up in cl cts 'basic/test_basic intmath_int'.
But in theory the same problem could crop up elsewhere.
Signed-off-by: Rob Clark <robdclark@gmail.com>
I think this should also always only occur at the end of a BB (by
definition), and the BB successor should be the end block.
Signed-off-by: Rob Clark <robdclark@gmail.com>
glBindBufferRange(..) in vrend_draw_bind_ubo is failing with
more than one uniform block. This is due to improper alignment
of the start of the second block. Let's query the proper
alignment from the driver and pass it back to Mesa.
Let's query for the texture alignment too, even though the Virgl
renderer doesn't call glTexBufferRange yet.
The default values are the widest workable range possible (for example,
GL_UNIFORM_BUFFER_OFFSET_ALIGNMENT on Nvidia is 256).
Fixes:
dEQP-GLES3.functional.ubo.* on Nvidia
Example test:
dEQP-GLES3.functional.ubo.multi_basic_types.single_buffer.shared_vertex
Note: This is based on "virgl: reduce some default capset limits.",
which hasn't landed in Mesa yet but should relatively soon.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Since v2 might take a while to rollout, we should reduce
these inside some gathered minimums and then v2 can increase
them using host values.
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This checks the kernel api is new enough and asks for the
larger caps size since the kernel won't mess it up now.
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Until llvm handles indirects better we will need to use these
workarounds in the radeonsi backend also.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The change tries to catch more opportunities to reuse the same set
of VAO's when building up display lists. Instead of checking the
offset with respect to the beginning of the vertex buffer object
the change tries to apply this same optimization with respect to the
previous display list node.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reduces my build from 1717 warnings to 1547 warnings by silencing 170
instances of things like
In file included from ../../SOURCE/master/src/mesa/main/texcompress_bptc.h:30:0,
from ../../SOURCE/master/src/mesa/main/texcompress_bptc.c:31:
../../SOURCE/master/src/mesa/main/texcompress_bptc.c: In function ‘_mesa_texstore_bptc_rgba_unorm’:
../../SOURCE/master/src/mesa/main/texstore.h:60:14: warning: unused parameter ‘dstFormat’ [-Wunused-parameter]
mesa_format dstFormat, \
^
../../SOURCE/master/src/mesa/main/texcompress_bptc.c:1276:32: note: in expansion of macro ‘TEXSTORE_PARAMS’
_mesa_texstore_bptc_rgba_unorm(TEXSTORE_PARAMS)
^~~~~~~~~~~~~~~
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reduces my build from 2075 warnings to 2023 warnings by silencing 52
instances of things like
src/compiler/nir/nir_constant_expressions.c: In function ‘evaluate_bfi’:
src/compiler/nir/nir_constant_expressions.c:1812:61: warning: unused parameter ‘bit_size’ [-Wunused-parameter]
evaluate_bfi(MAYBE_UNUSED unsigned num_components, unsigned bit_size,
^~~~~~~~
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reduces my build from 6301 warnings to 2075 warnings by silencing 4226
instances of things like
src/mesa/drivers/dri/i965/i965@sta/brw_oa_hsw.c: In function ‘hsw__render_basic__gpu_core_clocks__read’:
src/mesa/drivers/dri/i965/i965@sta/brw_oa_hsw.c:41:62: warning: unused parameter ‘brw’ [-Wunused-parameter]
hsw__render_basic__gpu_core_clocks__read(struct brw_context *brw,
^~~
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reduces my build from 6451 warnings to 6301 warnings by silencing 150
instances of
../../SOURCE/master/src/intel/compiler/brw_inst.h: In function ‘brw_reg_type brw_inst_src1_type(const gen_device_info*, const brw_inst*)’:
../../SOURCE/master/src/intel/compiler/brw_inst.h:802:55: warning: enumeral and non-enumeral type in conditional expression [-Wextra]
unsigned file = __builtin_strcmp("dst", #reg) == 0 ? \
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
BRW_GENERAL_REGISTER_FILE : \
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
brw_inst_##reg##_reg_file(devinfo, inst); \
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../SOURCE/master/src/intel/compiler/brw_inst.h:811:1: note: in expansion of macro ‘REG_TYPE’
REG_TYPE(src1)
^~~~~~~~
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reduces my build from 7119 warnings to 7005 warnings by silencing 114
instances of
In file included from ../../SOURCE/master/src/mesa/drivers/dri/i965/brw_context.h:46:0,
from ../../SOURCE/master/src/mesa/drivers/dri/i965/intel_pixel_read.c:38:
../../SOURCE/master/src/mesa/drivers/dri/i965/brw_bufmgr.h: In function ‘brw_bo_unmap’:
../../SOURCE/master/src/mesa/drivers/dri/i965/brw_bufmgr.h:258:47: warning: unused parameter ‘bo’ [-Wunused-parameter]
static inline int brw_bo_unmap(struct brw_bo *bo) { return 0; }
^~
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
These days, we're just passing a pointer to a prog_data field, which
we already have access to. We can just use it directly.
(In the past, it was a pointer to a separate value.)
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
This should have no practical impact. For the default uploader, we
don't really care, but for others, we may want to append more data
as the GPU is reading existing data, which means we need async and
persistent flags.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
I'd like to reuse the upload logic for a new program cache, but the
buffers will need to have a different lifetime than the default
uploader, and also some address space restrictions. So, we can't
use a single uploader for both situations - we'll need two of them.
This creates a public 'uploader' structure, and adjusts the interface
to take an uploader rather than always using brw->upload. It should
have no functional change at the moment.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Commit bit in the message descriptor (Bit 13) must be always set
to true in CNL+ for memory fence messages. It also fixes a piglit
GPU hang on cnl+ in simulation environment.
Piglit test: arb_shader_image_load_store-shader-mem-barrier
See HSD ES # 1404612949
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
This reverts commit a4031bdfa9. It's
redundant with the sample mask predication done at this point by the
common logical send lowering infrastructure, and rather buggy because
it wasn't applying the correct sample mask in shaders using discard,
since the dispatch mask returned by FS_OPCODE_MOV_DISPATCH_TO_FLAGS
doesn't reflect samples discarded by the shader, so it could have led
to data corruption in fragment shader invocations that execute discard
based on a non-dynamically uniform condition.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The main motivation is to enable HDC surface opcodes on ICL which no
longer allows the sample mask to be provided in a message header, but
this is enabled all the way back to IVB when possible because it
decreases the instruction count of some shaders using HDC messages
significantly, e.g. one of the SynMark2 CSDof compute shaders
decreases instruction count by about 40% due to the removal of header
setup boilerplate which in turn makes a number of send message
payloads more easily CSE-able. Shader-db results on SKL:
total instructions in shared programs: 15325319 -> 15314384 (-0.07%)
instructions in affected programs: 311532 -> 300597 (-3.51%)
helped: 491
HURT: 1
Shader-db results on BDW where the optimization needs to be disabled
in some cases due to hardware restrictions:
total instructions in shared programs: 15604794 -> 15598028 (-0.04%)
instructions in affected programs: 220863 -> 214097 (-3.06%)
helped: 351
HURT: 0
The FPS of SynMark2 CSDof improves by 5.09% ±0.36% (n=10) on my SKL
laptop with this change. According to Eero this improves performance
of the same test by 9% on BYT and by 7-8% on BXT J4205 and on SKL GT2
desktop.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-By: Eero Tamminen <eero.t.tamminen@intel.com>
This makes sure that the header-present bit of the message descriptor
is in sync with the IR instruction fields, which gives the optimizer
more control to avoid the overhead of setting up a message header when
it's possible to do so.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This shouldn't cause any functional change at this point, it changes
SHADER_OPCODE_FIND_LIVE_CHANNEL to use the flag register specified at
the IR level instead of the hard-coded f1.0, now that it can be
represented in backend_instruction::flag_subreg. This will be
necessary for scheduling to behave correctly once more things start
making use of f1.0.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This allows representing conditional mods and predicates on f1.0-f1.1
at the IR level by adding an extra bit to the flag_subreg
backend_instruction field.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
SLM has a chunk of special-purpose memory separate from L3 on ICL+, we
shouldn't allocate a partition for it on L3 anymore.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Since geometry shader also consumes prescale constants, the
geometry shader constant buffer will need to be updated when prescale
factor is changed.
Reviewed-by: Brian Paul <brianp@vmware.com>
The earlier Mesa commit 3d06c8afb5 ("st/mesa: don't translate blend
state when it's disabled for a colorbuffer") subtly changed the
details of gallium's per-RT blend state.
In particular, when pipe_rt_blend_state[i].blend_enabled is true,
we have to get the src/dst blend terms from pipe_rt_blend_state[i],
not [0] as before.
We now have to scan the blend targets to find the first one that's
enabled (if any). We have to use the index of that target for getting
the src/dst blend terms. And note that we have to set identical blend
terms for all targets.
This fixes the Piglit fbo-drawbuffers2-blend test. VMware bug 2063493.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
We were calling SVGA3D_vgpu10_DestroyBlendState() when vgpu10 was not
enabled (bs->id==0 by default), resulting in lots of device errors.
Reviewed-by: Neha Bhende<bhenden@vmware.com>
If svga_update_state() fails, we flush the command buffer and retry.
If it fails again, it likely means we were unable to translate a shader
for some reason (uses too many resources, for example). In that case,
let's just skip the draw call. The alternative, just disabling the
shader stage in question, would certainly lead to bad rendering anyway,
and probably device errors.
Fixes failed assertion running Piglit glsl-1.50/execution/
variable-indexing/gs-output-array-vec4-index-wr.shader_test since it
uses too many GS output registers (though the test still fails).
VMware bug 2063492.
v2: also call pipe_debug_message() so apps or apitrace can be notified
when this issue occurs.
v3: use svga_update_state_retry().
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Neha Bhende <bhenden@vmware.com>
Previous patch missed a "return" when trying to modify the create encoder
function, which made the whole logic fail. Therefore, add the return back.
Fixes: b38b208ff8 "radeonsi:create uvd hevc enc entry"
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
ARM SoCs usually have their DRM/KMS devices on the platform bus, so add
support for this bus in order to allow use of the DRI_PRIME environment
variable with those devices.
While at it, also support the host1x bus, which is effectively the same
but uses an additional layer in the bus hierarchy.
Note that it isn't enough to support the bus that has the rendering GPU
because the loader code will also try to construct an ID path tag for a
scanout-only device if it is the default that is being opened.
The ID path tag for a device can be obtained by running udevadm info on
the device node, as shown in this example on NVIDIA Tegra:
$ udevadm info /dev/dri/card0 | grep ID_PATH_TAG
E: ID_PATH_TAG=platform-50000000_host1x
The corresponding OF_FULLNAME property, from which the ID_PATH_TAG is
constructed, can be found in the sysfs "uevent" attribute for the card0
device's parent:
$ grep OF_FULLNAME /sys/devices/platform/50000000.host1x/drm/uevent
OF_FULLNAME=/host1x@50000000
Similarily, /dev/dri/card1 corresponds to the GPU:
$ udevadm info /dev/dri/card1 | grep ID_PATH_TAG
E: ID_PATH_TAG=platform-57000000_gpu
and:
$ grep OF_FULLNAME /sys/devices/platform/57000000.gpu/uevent
OF_FULLNAME=/gpu@57000000
Changes in v2:
- avoid confusing pre-increment in strdup()
- add examples of tags to commit message
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The disk cache implementation uses 64-bit atomic operations. For some
architectures, such as 32-bit ARM, GCC will not be able to translate
these operations into atomic, lock-free instructions and will instead
rely on the external atomics library to provide these operations.
Check at configuration time whether or not linking against libatomic
is necessary and if so, create a dependency that can be used while
linking the mesautil library.
This is the meson equivalent of 2ef7f23820 ("configure: check if
-latomic is needed for __atomic_*").
For some background information on this, see:
https://gcc.gnu.org/wiki/Atomic/GCCMM
Changes in v2:
- clarify meaning of lock-free in commit message
- fix build if -latomic is not necessary
Acked-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This is just useless for two reasons:
1) flush_bits is not set accordingly, so nothing will be flushed
in BeginQuery().
2) we always flush caches in EndCommandBuffer(), so if a reset
is done in a previous command buffer we are safe.
Cc: "18.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This allows most GPU objects to use the full 48-bit address space
offered by Gen8+ platforms, rather than being stuck with 32-bit.
This expands the available GPU memory from 4G to 256TB or so.
A few objects - instruction, scratch, and vertex buffers - need to
remain pinned in the low 4GB of the address space for various reasons.
We default everything to 48-bit but disable it in those cases.
Thanks to Jason Ekstrand for blazing this trail in anv first and
finding the nasty undocumented hardware issues. This patch simply
rips off all of his findings.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
This gives the scheduler visibility into the headers which should
improve scheduling. More importantly, however, it lets the scheduler
know that the header gets written. As-is, the scheduler thinks that a
texture instruction only reads it's payload and is unaware that it may
write to the first register so it may reorder it with respect to a read
from that register. This is causing issues in a couple of Dota 2 vertex
shaders.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104923
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Following on from 49879f3778 this makes sure we use the correct
src index.
Fixes cts test:
KHR-GL46.compute_shader.atomic-case3
Reviewed-by: Dave Airlie <airlied@redhat.com>
We only need to check for previously processed location on user
defined varyings as they are the only ones that support component
packing. Therefore a single instance of processed_locs can be
shared by regular varyings and patches.
For simplicity we make processed_locs an array in order to handle
dual source bleanding.
Fixes the follow piglit test on radeonsi:
tests/spec/arb_enhanced_layouts/execution/component-layout/fs-output.shader_test
Reviewed-by: Dave Airlie <airlied@redhat.com>
This speeds up the Sascha Willems multisampling demo by around 25% when
using 8x or 16x MSAA.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
We'll want to re-use the complex resolve predicate computations for MCS
resolves so it's nice to have them as helper functions.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
This doesn't actually do anything because att_state->fast_clear is
determined based on the return value of anv_layout_to_fast_clear_type
which currently returns NONE for multisampled images.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
This is a bit complicated because we have to get the indirect clear
color in there somehow. In order to not do any more work in the shader
than needed, we set it up as it's own vertex binding which points
directly at the clear color address specified by the client.
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
There are enough #ifs in there that it's kind-of pointless to duplicate
it for each buffer.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Instead of listing all the UNIX PIPE_OS platforms just use
PIPE_OS_UNIX. Makes BSD sockets available on PIPE_OS_BSD.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Brian Paul <brianp@vmware.com>
OpenBSD, FreeBSD, NetBSD and DragonFlyBSD all have clock_gettime()
so use it when PIPE_OS_BSD is defined.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Brian Paul <brianp@vmware.com>
3 digits versions in LLVM only started from 3.4.1 on.
Hence, even if you can perfectly build with an old LLVM (< 3.4.1) in
the system while not needing LLVM at all (auto), when passing through
the LLVM version detection code, meson will fail when accessing
"_llvm_version[2]" due to:
"Index 2 out of bounds of array of size 2."
v2: Properly compare LLVM version and set patch version to 0
if < 3.4.1 (Eric).
v3: Improve the commit log explanation (Eric).
Cc: Dylan Baker <dylan@pnwbakers.com>
Cc: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
In 16631ca30e we fixed gen9 active components to account for padded
inputs in the URB, which we can have with SSO programs. To do that,
instead of going through the bitfield of inputs (which doesn't include
padding information), we compute the number of inputs from the size
of the URB entry.
Unfortunately, there are some special inputs that are not stored in
the URB and that we also need to account for. These special inputs
are identified and handled during calculate_attr_overrides().
Instead of keeping track of the exact number of inputs, we just
program active components for all possible inputs like we do in
anvil.
This fixes a regression in a WebGL program that uses Point Sprite
functionality (specifically, VARYING_SLOT_PNTC).
v2:
- Add 'Fixes' tag (Mark Janes)
- make no_vue_inputs int instead of uint32_t, and add const qualifier
to num_inputs variable (Ian)
v3:
- Do not try to count inputs correctly, just program all input
slots like we do in anvil (Ken)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105224
Fixes: 16631ca30e (i965/sbe: fix active components for SSO programs with over 16 inputs)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This is an optimization which reduces the number of flushes for
small pool buffers.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
var->name could be NULL under ARB_gl_spirv for example. And in any
case, the code is already handing var name being NULL when reading a
variable, so it is consistent to do it writing a variable too.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
The introduction of 16-bit types with VK_KHR_16bit_storages implies that
push constant offsets could be multiple of 2-bytes. Some assertions are
updated so offsets should be just multiple of size of the base type but
in some cases we can not assume it as doubles aren't aligned to 8 bytes
in some cases.
For 16-bit types, the push constant offset takes into account the
internal offset in the 32-bit uniform bucket adding 2-bytes when we access
not 32-bit aligned elements. In all 32-bit aligned cases it just becomes 0.
v2: Assert offsets to be aligned to the dest type size. (Jason Ekstrand)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Range in 16-bit push constants load was being calculated
wrongly using 4-bytes per element instead of 2-bytes as it
should be.
v2: Use glsl_get_bit_size instead of if statement
(Jason Ekstrand)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Enables storageBuffer16BitAccess and uniformAndStorageBuffer16BitAccesss
features of VK_KHR_16bit_storage for Gen8+.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Restrict the use of untyped_surface_write with 16-bit pairs in
ssbo to the cases where we can guarantee that offset is multiple
of 4.
Taking into account that VK_KHR_relaxed_block_layout is available
in ANV we can only guarantee that when we have a constant offset
that is multiple of 4. For non constant offsets we will always use
byte_scattered_write.
v2: (Jason Ekstrand)
- Assert offset_reg to be multiple of 4 if it is immediate.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
16-bit load_ubo/ssbo operations that call do_untyped_read_vector don't
guarantee that offsets are multiple of 4-bytes as required by untyped_read
message. This happens for example in the case of f16mat3x3 when then
VK_KHR_relaxed_block_layout is enabled.
Vectors reads when we have non-constant offsets are implemented with
multiple byte_scattered_read messages that not require 32-bit aligned offsets.
Now for all constant offsets we can use the untyped_read_surface message.
In the case of constant offsets not aligned to 32-bits, we calculate a
start offset 32-bit aligned and use the shuffle_32bit_load_result_to_16bit_data
function and the first_component parameter to skip the copy of the unneeded
component.
v2: (Jason Ekstrand)
Use untyped_read_surface messages always we have constant offsets.
v3: (Jason Ekstrand)
Simplify loop for reads with non constant offsets.
Use end - start to calculate the number of 32-bit components to read with
constant offsets.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This helper used to load 16bit components from 32-bits read now allows
skipping components with the new parameter first_component. The semantics
now skip components until we reach the first_component, and then reads the
number of components passed to the function.
All previous uses of the helper are updated to use 0 as first_component.
This will allow read 16-bit components when the first one is not aligned
32-bit. Enabling more usages of untyped_reads with 16-bit types.
v2: (Jason Ektrand)
Change parameters order to first_component, num_components
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The surfaces that backup the GPU buffers have a boundary check that
considers that access to partial dwords are considered out-of-bounds.
For example, buffers with 1,3 16-bit elements has size 2 or 6 and the
last two bytes would always be read as 0 or its writting ignored.
The introduction of 16-bit types implies that we need to align the size
to 4-bytew multiples so that partial dwords could be read/written.
Adding an inconditional +2 size to buffers not being multiple of 2
solves this issue for the general cases of UBO or SSBO.
But, when unsized arrays of 16-bit elements are used it is not possible
to know if the size was padded or not. To solve this issue the
implementation calculates the needed size of the buffer surfaces,
as suggested by Jason:
surface_size = isl_align(buffer_size, 4) +
(isl_align(buffer_size, 4) - buffer_size)
So when we calculate backwards the buffer_size in the backend we
update the resinfo return value with:
buffer_size = (surface_size & ~3) - (surface_size & 3)
It is also exposed this buffer requirements when robust buffer access
is enabled so these buffer sizes recommend being multiple of 4.
v2: (Jason Ekstrand)
Move padding logic fron anv to isl_surface_state.
Move calculus of original size from spirv to driver backend.
v3: (Jason Ekstrand)
Rename some variables and use a similar expresion when calculating.
padding than when obtaining the original buffer size.
Avoid use of unnecesary component call at brw_fs_nir.
v4: (Jason Ekstrand)
Complete comment with buffer size calculus explanation in brw_fs_nir.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Like before use local variables from compile_vertex_list instead.
Remove vertex_size from struct vbo_save_vertex_list.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
The buffer_offset is used in aligned_vertex_buffer_offset.
But now that most of these decisions are done in compile_vertex_list
we can work on local variables instead of struct members in the
display list code. Clean that up and remove buffer_offset.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Replace last use on replay with _vbo_save_get_{min,max}_index. Appart from
that it is not used anymore.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Is not used anymore on replay, move the last use in display list
compilation to the original array in the display list compiler.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Is not used anymore on replay, move the last use in display list
compilation to the original array in the display list compiler.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Since we now store a set of VAOs in the display list, use these object
to get the reference to the VBO in several places.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Use the information already present in the VAO to update the current values
after display list replay. Set GL_OUT_OF_MEMORY on allocation failure
for the current value update storage.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Use the information already present in the VAO to replay a display list
node using immediate mode draw commands. Use a hand full of helper methods
that will be useful for the next patches also.
v2: Insert asserts, constify local variables.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
The master value is now stored inside the VAO already present in
struct vbo_save_vertex_list. Remove the unneeded copy from dlist storage.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
We don't zalloc the physical device so we need to unconditionally set
everything. Crucible helpfully initializes all allocations to 139 so it
was getting true regardless of whether or not the kernel actually
supports context priorities.
Fixes: 6d8ab53303 "anv: implement VK_EXT_global_priority extension"
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This reverts commit a2c1e48f15.
On BDWGT3e and KBLGT3e systems, this commit regressed the following
tests:
piglit.spec.ext_framebuffer_multisample.accuracy 2 stencil_resolve small depthstencil
piglit.spec.ext_framebuffer_multisample.accuracy 4 stencil_resolve small depthstencil
piglit.spec.ext_framebuffer_multisample.accuracy 6 stencil_resolve small depthstencil
piglit.spec.ext_framebuffer_multisample.accuracy 8 stencil_resolve small depthstencil
piglit.spec.ext_framebuffer_multisample.accuracy all_samples stencil_resolve small depthstencil
This stops a crash when running (still fails):
tests/spec/arb_gpu_shader_fp64/execution/explicit-location-gs-fs-vs.shader_test
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The nir->llvm conversion was using the wrong srcs.
Fixes:
tests/spec/arb_compute_shader/execution/shared-atomics.shader_test
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Gen4 point clipping calls brw_clip_tri_alloc_regs with nr_verts == 0,
which means that c->reg.vertex[] isn't initialized. It then emits MOVs
to stomp components of those uninitialized registers to 0.
This started causing assertions after Matt's recent series, when those
uninitialized registers started getting BRW_REGISTER_TYPE_NF, which
definitely doesn't exist on Gen4-5.
Reviewed-by: Matt Turner <mattst88@gmail.com>
We need to align the size of the slice, not the offset of the next slice.
Fixes KHR-GLES3.texture_repeat_mode.rgba32ui_11x131_2_clamp_to_edge.
Fixes: b4b4ada761 ("broadcom/vc5: Fix layout of 3D textures.")
Before, we were trusting in the hardware to take the intersection
of the viewport clip with the drawing rectangle. Unfortunately,
3DSTATE_DRAWING_RECTANGLE is fairly expensive because it implicitly
does a full pipeline stall. If we're a bit more careful with our
viewport clipping, we can just re-emit it once at context creation
time.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The delayed loading code was fail if we had control flow.
This fixes:
tests/spec/arb_shader_image_load_store/execution/image_checkerboard.shader_test
v2: don't use temp_reg before setting temp_reg up.
Tested-by: Gert Wollny <gw.fossdev@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
With the Align16 tests now disabled, we can run the rest of the tests in
ICL mode (and see them pass!)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Align16 is no more. We previously generated an align16 ADD instruction
to calculate DDY:
add(16) g25<1>F -g23<4>.xyxyF g23<4>.zwzwF { align16 1H };
Without align16, we now implement it as:
add(4) g25<1>F -g23<0,2,1>F g23.2<0,2,1>F { align1 1N };
add(4) g25.4<1>F -g23.4<0,2,1>F g23.6<0,2,1>F { align1 1N };
add(4) g26<1>F -g24<0,2,1>F g24.2<0,2,1>F { align1 1N };
add(4) g26.4<1>F -g24.4<0,2,1>F g24.6<0,2,1>F { align1 1N };
where only the first two instructions are needed in SIMD8 mode.
Note: an earlier version of the patch implemented this in two
instructions in SIMD16:
add(8) g25<2>F -g23<4,2,0>F g23.2<4,2,0>F { align1 1N };
add(8) g25.1<2>F -g23.1<4,2,0>F g23.3<4,2,0>F { align1 1N };
but I realized that the channel enable bits will not be correct. If we
knew we were under uniform control flow, we could emit only those two
instructions however.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
In a future patch, generate_ddy will want to inspect inst->exec_size.
Change generate_ddx as well for consistency.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The PLN instruction is no more. Its functionality is now implemented
using two MAD instructions with the new native-float type. Instead of
pln(16) r20.0<1>:F r10.4<0;1,0>:F r4.0<8;8,1>:F
we now have
mad(8) acc0<1>:NF r10.7<0;1,0>:F r4.0<8;8,1>:F r10.4<0;1,0>:F
mad(8) r20.0<1>:F acc0<8;8,1>:NF r5.0<8;8,1>:F r10.5<0;1,0>:F
mad(8) acc0<1>:NF r10.7<0;1,0>:F r6.0<8;8,1>:F r10.4<0;1,0>:F
mad(8) r21.0<1>:F acc0<8;8,1>:NF r7.0<8;8,1>:F r10.5<0;1,0>:F
... and in the case of SIMD8 only the first pair of MAD instructions is
used.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
If multiple instructions are emitted, special handling of things like
conditional mod and NoDDClr/NoDDChk need to be performed.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This isn't technically broken, but the next patch will make this
function report whether it generated multiple instructions, and that
information will be used to disable the application of conditional mod
by the generic code.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This new type exposes the additional precision offered by the
accumulator register and will be used in the next patch to implement the
functionality of the PLN instruction using a pair of MAD instructions.
One weird thing to note: align1 ternary instructions may only have an
accumulator in the dst or src1 normally, but when src0's type is :NF
the accumulator is read.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The hardware register types' encodings have changed on Gen11. Good thing
we have that superfluous looking brw_reg_type abstraction lying around!
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Gen11 does not support DF, Q, UQ types in hardware. As a result, we have
to disable some GL extensions until they can be reimplemented.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
anv_gem_set_context_param is to be used directly instead!
Fixes: 6d8ab53303 "anv: implement VK_EXT_global_priority extension"
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Fix clipper validMask setting. We don't need to run frustum rejected
primitives through the clipper. Perform frustum culling with only
frustum clip codes. Guardband clip codes cannot be used because they
overlap frustum codes.
Reviewed-By: Bruce Cherniak <bruce.cherniak@intel.com>
Translate is now part of an overloaded LOAD call which required a change to
the code gen to skip the load functions in order to handle them manually
to make them virtual.
Reviewed-By: Bruce Cherniak <bruce.cherniak@intel.com>
- Have the draw type sent to DrawInfoEvent in handlers created in
archrast.cpp. The draw type no longer needs to be sent during during
AR_API_EVENT() call in api.cpp.
- Remove draw type from event defintions in events_private.proto, no
longer needed
Reviewed-By: Bruce Cherniak <bruce.cherniak@intel.com>
Populate pLastIndex, even for the non-indexed case. An zero pLastIndex
can cause the index offsets inside the fetcher to have non-sensical values
that can be either very large positive or very large negative numbers.
Reviewed-By: Bruce Cherniak <bruce.cherniak@intel.com>
We were setting view to NULL if the iteration was larger than i.
But in fact if the view is NULL the code did nothing anyway...
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
v2: add ANV_CONTEXT_REALTIME_PRIORITY (Chris)
use unreachable with unknown priority (Samuel)
v3: add stubs in gem_stubs.c (Emil)
use priority defines from gen_defines.h
v4: cleanup, add anv_gem_set_context_param (Jason)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (v2)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Reviewed-by: Emil Velikov <emil.velikov@collabora.com> (v3)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We now have hopefully fixed all bugs regarding high addresses on Vega10 and
Raven. Start to use the high range to make room for SVM in the low
range.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
According to GLSL ES 3.2 spec, see table in 9.2.1 "Linked Shaders"
section, the precision qualifier should match for uniform variables.
This also applies to previous GLSL ES 3.x specs.
This 'if' checks the condition for uniform variables, while for UBOs
it is checked in link_interface_blocks.cpp.
Fixes: b50b82b8a5
("glsl/es31: precision qualifier doesn't need to match in shader interface block members")
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Previously we had a check for 1d of narrow 2D textures, however
narrow 2d textures caused gpu hangs, but it was correct for 1d
textures.
This fixes a bunch of 1D image piglits for me.
Fixes: 7b8e1c089d (r600/texture: drop lowering 1d/2d images to linear.)
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Ideally the st_finalize_texture call would take care of that, but it
doesn't seem to with KHR-GL45.shader_image_size.advanced-nonMS-*. This
assertion makes sure that no such values are passed to the driver.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This was segfaulting:
dEQP-VK.memory.pipeline_barrier.host_write_index_buffer.1024
Fixes: 8de6f79707 (ac/radeonsi: add load_base_vertex() to the abi)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
radeonsi, i965 and anv all treat fdd{x,y} opcodes the same as
fdd{x,y}_coarse by default. The SPIR-V spec lets the implementation
decide how it should be handled and radv was previously going
for the higher quality option. Here we change the shared amd
code to match how nir_op_fdd{x,y} is expected to be handled
by the other NIR drivers.
Fixes piglit test:
./bin/arb_shader_texture_lod-texgrad -auto
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The lowering is incompatible with how the radeonsi backend works.
Fixes piglit test:
./bin/arb_shader_draw_parameters-basevertex vertexid-zerobased -auto
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
test_fuzz_compact_instruction() was attempting to modify the uint64_t
data array of a brw_inst through a pointer to uint32_t, which has
undefined behavior. This was causing the test_eu_compact unit test to
fail mysteriously for me on GCC 7 with some additional
harmless-looking changes I had applied to my tree, which happened to
affect the order instructions are emitted by GCC causing the bit
twiddling to be done after the clear_pad_bits() call which is supposed
to overwrite the same data through a pointer of different type,
leading to data corruption. A similar failure has been reported by
Vinson Lee on the master branch built with GCC 8.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105052
Tested-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
In order to fix a build failure on compilers not implementing
unrestricted unions, which is a C++11 feature.
v2: Provide signed integer comparison and assignment operators instead
of BITSET_WORD ones to avoid spurious ambiguity warnings on
comparisons with a signed integer literal.
Fixes: ba79a90fb5 "glsl: Switch ast_type_qualifier to a 128-bit bitset."
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105238
Tested-by: Roland Scheidegger <sroland@vmware.com>
Tested-By: George Kyriazis <george.kyriazis@intel.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
It's basically just the opposite, and it only makes sense to
round the layer for 2D texture arrays.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The hardware skips over unallocated slots, so we have to make sure those
registers are packed together.
Fixes KHR-GL45.enhanced_layouts.fragment_data_location_api
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Tested-by: Karol Herbst <kherbst@redhat.com>
It looks like we had all the pieces in place for this,
just never tested it and turned it on.
I don't see any CTS regressions and the computeshader
demo runs.
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
currently while insterting barriers, writes and reads to FILE_FLAGS aren't
considered. This can lead to WaR hazards in some situations.
With the previous commit fixes shaders with intstructions like this:
mad u32 $r2 $r4 $r11 $r2
mad u32 { $r5 $c0 } $r4 $r10 $r6
mad (SUBOP:1) u32 $r3 $r4 $r10 $r2 $c0
Affects OpenCL CTS tests on Maxwell+:
basic/test_basic intmath_long
basic/test_basic intmath_long2
basic/test_basic intmath_long4
v2: only put barriers on instructions which actually read flags
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
In the sched data calculator we have to track first use of defs by iterating
over all defs of an instruction, not just the first one.
v2: fix minGRP and maxGRP values
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Similar to 90dd6e5 ("Android: egl: add dependency on libnativewindow")
Fixes the following building error:
In file included from out/target/product/x86_64/obj_x86/STATIC_LIBRARIES/libmesa_vulkan_util_intermediates/util/vk_enum_to_str.c:26:
external/mesa/include/vulkan/vk_android_native_buffer.h:22:10: fatal error: 'system/window.h' file not found
^~~~~~~~~~~~~~~~~
1 error generated.
Cc: "18.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Similar to 90dd6e5 ("Android: egl: add dependency on libnativewindow")
Fixes the following building errors:
In file included from external/mesa/src/intel/vulkan/gen7_cmd_buffer.c:30:
In file included from external/mesa/src/intel/vulkan/anv_private.h:72:
external/mesa/include/vulkan/vk_android_native_buffer.h:22:10: fatal
error: 'system/window.h' file not found
^~~~~~~~~~~~~~~~~
1 error generated.
...
In file included from external/mesa/src/intel/vulkan/anv_gem.c:32:
In file included from external/mesa/src/intel/vulkan/anv_private.h:72:
external/mesa/include/vulkan/vk_android_native_buffer.h:22:10: fatal
error: 'system/window.h' file not found
^~~~~~~~~~~~~~~~~
1 error generated.
Cc: "18.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Building rules are aligned to automake ones
The correct script to build anv_extensions.{c,h} is anv_extensions_gen.py
Generation rules for anv_extensions.c requires --out-c option
Generation rules for anv_extensions.h were missing
Necessary include paths are added to avoid following build errors:
cp: cannot stat '.../gen/STATIC_LIBRARIES/libmesa_vulkan_common_intermediates/vulkan/anv_extensions.c':
No such file or directory
In file included from external/mesa/src/intel/vulkan/anv_gem.c:32:
external/mesa/src/intel/vulkan/anv_private.h:75:10: fatal error: 'anv_extensions.h' file not found
^~~~~~~~~~~~~~~~~~
1 error generated.
In file included from external/mesa/src/intel/vulkan/anv_batch_chain.c:30:
external/mesa/src/intel/vulkan/anv_private.h:75:10: fatal error: 'anv_extensions.h' file not found
^~~~~~~~~~~~~~~~~~
1 error generated.
Fixes: dd088d4bec ("anv/extensions: Generate a header file with extension tables")
Cc: "18.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
so that it can be removed and replaced with inline VBO descriptors,
and the pointer can be packed in unused bits of VBO descriptors.
This also removes the pointer from merged TES-GS where it's useless.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
autotools wants to have the BUILT_SOURCES ready as soon as it enters the
directory, even if they are not used. This meant the build failed if
wayland-protocols was not available on the system, even if it was not
enabled.
As BUILT_SOURCES cannot be used in a conditional (cf. 166852ee95), do
the same thing as EGL and manually encode the dependencies in the
Makefile.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Fixes: bfa22266cd ("vulkan/wsi/wayland: Add support for zwp_dmabuf")
Cc: Emil Velikov <emil.velikov@collabora.co.uk>
Reported-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105211
On cayman this was hitting an assert later, which probably wasn't
see on non-cayman due to having the t slot.
Fixes: 9041730d1 (r600: add support for ARB_shader_clock.)
This requires passing an extra argument to the lowering pass because
the KHR_blend_equation_advanced specification doesn't seem to define
any mechanism for the implementation to determine at compile-time
whether coherent blending can ever be used (not even an "#extension
KHR_blend_equation_advanced_coherent" directive seems to be required
in the shader source AFAICT).
In the long run we'll probably want to do state-dependent recompiles
based on the value of ctx->Color.BlendCoherent, but right now there
would be no benefit from that because the only driver that supports
coherent framebuffer fetch is i965 on SKL+ hardware, which are unable
to support the non-coherent path for the moment because of texture
layout issues, so framebuffer fetch coherency is always enabled for
them.
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>
This allows the application to request framebuffer fetch coherency
with per-fragment output granularity. Coherent framebuffer fetch
outputs (which is the default if no qualifier is present for
compatibility with older versions of the EXT_shader_framebuffer_fetch
extension) will have ir_variable_data::memory_coherent set to true.
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>
At the same point where it is initialized on GL(ES) 3.0+ so we can
implement some common layout qualifier handling in a future commit.
Until now the fb_fetch_output flag would be inherited from the
original implicit gl_LastFragData declaration at a later point in the
AST to GLSL IR translation.
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>
This should end the drought of bits in the ast_type_qualifier object.
The bitset_t type works pretty much as a drop-in replacement for the
current uint64_t bitset.
The only catch is that the bitset_t type as defined in the previous
commit doesn't have a trivial constructor (because it has a
user-defined constructor), so it cannot be used as union member
without providing a user-defined constructor for the union (which
causes it in turn to be non-trivially constructible). This annoyance
could be easily addressed in C++11 by declaring the default
constructor of bitset_t to be the implicitly defined one -- IMO one
more reason to drop support for GCC 4.2-4.3.
The other minor change was required because glsl_parser_extras.cpp was
hard-coding the type of bitset temporaries as uint64_t, which (unlike
would have been the case if the uint64_t had been replaced with
e.g. an __int128) would otherwise have caused a build failure, because
the boolean conversion operator of bitset_t is marked explicit (if
C++11 is available), so the bitset won't be silently truncated down to
1 bit in order to use it to initialize the uint64_t temporaries
(yikes).
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>
This can be used to specify that a C++ conversion operator is not
meant to be used for implicit conversions, which can lead to
unintended loss of information in some cases. Implemented as a macro
in order to keep old GCC versions happy.
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>
Desktop GL is now supported, and there is an additional entry-point
for EXT_shader_framebuffer_fetch_non_coherent.
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>
The changes I had originally planned for the MESA_shader_framebuffer_fetch
extension have been merged into the EXT spec, there's no point in keeping
MESA_shader_framebuffer_fetch extension enables.
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>
This GL entry point was renamed to glFramebufferFetchBarrier() in the
EXT extension on request from Khronos members. Update the Mesa
codebase to match the latest spec.
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>
This reverts two bogus and seemingly useless changes from the commits
referenced below, which broke KHR_blend_equation_advanced (and
EXT_shader_framebuffer_fetch_non_coherent which wasn't exposed yet)
for any kind of render target surface that would cause the
get_isl_surf() call in brw_emit_surface_state() to do anything useful
(notice how the result of get_isl_surf() is completely ignored by the
caller right now), as was the case while using those extensions with
1D array or 3D framebuffers in particular.
Fixes: f5859b45b1 "i965/miptree: Switch remaining surfaces to isl"
Fixes: bf24c3539e "i965/miptree: Clean-up unused"
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>
TCS_OUT_LAYOUT has 13 unused bits. That's enough for a 32-bit address
aligned to 512KB. Hey, it's a 13-bit pointer!
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
If 32-bit pointers are supported, both pointers can be moved into s[0:1]
and then ESGS has exactly the same user data SGPR declarations as VS.
If 32-bit pointers are not supported, only one pointer can be moved into
s[0:1]. In that case, the 2nd pointer is moved before TCS constants,
so that the location is the same in HS and GS.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
When transitioning to an htile compressed depth format, Set the full
depth range, so later rasterization can pass HiZ. Previously, for depth
only formats, the depth range was set to 0 to 0. This caused unwanted
HiZ rejections with a VK_FORMAT_D16_UNORM depth buffer
(VK_FORMAT_D32_SFLOAT was not affected somehow).
These values are derived from PAL [0], since I can't find the
specification describing the htile values.
[0] 5cba4ecbda/src/core/hw/gfxip/gfx9/gfx9MaskRam.cpp (L1500)
CC: Dave Airlie <airlied@redhat.com>
CC: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
CC: mesa-stable@lists.freedesktop.org
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Grazvydas Ignotas <notasas@gmail.com>
Fixes: 5158603182 "radv: Use correct HTILE expanded words."
Similar to cb0d1ba156 ("anv/extensions: Fix VkVersion::c_vk_version for patch == None")
fixes the following building errors:
out/target/product/x86_64/obj_x86/STATIC_LIBRARIES/libmesa_radv_common_intermediates/radv_entrypoints.c:1161:48:
error: use of undeclared identifier 'None'; did you mean 'long'?
return instance && VK_MAKE_VERSION(1, 0, None) <= core_version;
^~~~
long
external/mesa/include/vulkan/vulkan.h:34:43: note: expanded from macro 'VK_MAKE_VERSION'
(((major) << 22) | ((minor) << 12) | (patch))
^
...
fatal error: too many errors emitted, stopping now [-ferror-limit=]
20 errors generated.
Fixes: e72ad05c1d ("radv: Return NULL for entrypoints when not supported.")
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cube maps are entire miptrees repeated, while 3D textures have each level
have all of its layers next to each other. Fixes tex3d and
tex-miplevel-selection GL2:texture() 3D.
Like for vc4, the new DISPLAY_TARGET flag ended up causing no formats to
match. Just drop the whole retval == usage thing and return early when we
hit a known unsupported case.
Fixes: f7604d8af5 ("st/dri: only expose config formats that are display targets")
Once GBM started looking at the values of the alpha masks, ARGB/ABGR
wouldn't match any more because we had both A and R in the low bits.
Fixes: 2ed344645d ("gbm/dri: Add RGBA masks to GBM format table")
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This is more accurate with respect to the compatibility profile.
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
LLVM requirement was bumped to 4.0.0 with earlier commit.
Hence any code tailored for older versions is now unreachable.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-By: George Kyriazis <george.kyriazis@intel.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
When we set up the shadow resource we were copying the original resource
as the template, including its prsc->next field. When we shadowed the
first YUV plane's resource for linear-to-tiled conversion, we would end up
unbalancing the refcount on the shadow resource's destruction.
TS tiles map to a fixed amount of bytes in the color/depth surface,
so the blocksize of the format needs to be taken into account when
calculating the number of tiles to fill.
The simplest fix is to just use the layer stride, which is the surface
size in bytes.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Some of the 16bit formats misrender with missing tiles with the current
"2" state. As all the previously working formats also work with the "3"
state, just always use that one.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
This feature has caused some trouble already. Add a debug switch to
allow users to quickly check if a specific issue is caused by this
feature.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Currently meson will generate a pkg-config that links to EGL_mesa (or
GLX_mesa), but this isn't correct, it should always link to EGL or GL.
Probably the "right" solution is to have glvnd itself provide the pkg
config files for GL and EGL, but that also means that glvnd needs to
provide many of the header files, which makes it a more involved job.
Fixes: a47c525f32 ("meson: build glx")
Fixes: 035ec7a2bb ("meson: Add support for EGL glvnd")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
dri2_display_destroy() is called when platform specific display
initialisation fails. However, this would typically lead to a
segfault due to the dri2_egl_display vbtl not having been set up.
Fixes: 2db9548296 ("loader_dri3/glx/egl: Optionally use a blit
context for blitting operations")
Signed-off-by: Frank Binns <francisbinns@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
RGB9_E5 should be accepted by RenderbufferStorage if the
EXT_texture_shared_exponent is exposed. It is left to the
implementations to return GL_FRAMEBUFFER_UNSUPPORTED_EXT
when checking the framebuffer completeness if they do not
support rendering in this format.
Discussed in:
https://github.com/KhronosGroup/OpenGL-API/issues/32
This fixes KHR-GL45.internalformat.renderbuffer.rgb9_e5
v2: Added more info to the commit message (Antia)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Antia Puentes <apuentes@igalia.com>
Finally use an internal VAO to execute display list draws. Avoid
duplicate state validation for display list draws. Remove client arrays
previously used exclusively for display lists.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
VAOs will be used in the next change as immutable object across multiple
contexts. Only reference counting may write concurrently on the VAO. So,
make the reference count thread safe for those and only those VAO objects.
v3: Use bool/true/false for gl_vertex_array_object::SharedAndImmutable.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
Finally use an internal VAO to execute immediate mode draws. Avoid
duplicate state validation for immediate mode draws. Remove client arrays
previously used exclusively for immediate mode draws.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
Correct VBO_MATERIAL_SHIFT value.
The functions will be used next in this series.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
We will need the flush_vertices argument later in this series.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
Change vertex_attrib_binding() to _mesa_vertex_attrib_binding(), add a
flush_vertices argument, and make it publicly available.
The function will be needed later in the series.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
We will need the flush_vertices argument later in this series.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
Switch over to use the _DrawVAO for all the array type draws.
The _DrawVAO needs to be set before we enter _mesa_update_state, so move
setting the draw method in front of the first call to _mesa_update_state
which is in turn called from the *validate*Draw* calls. Using the
gl_vertex_array_object::_Enabled bitmask, gl_vertex_program_state::_VPMode
and gl_vertex_array_object::_AttributeMapMode we can already set
varying_vp_inputs before we call _mesa_update_state the first time.
Thus remove duplicate state validation.
v2: Update comments.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
Provided the _DrawVAO and the derived state that is maintained if we have
the _DrawVAO set, implement a method to incrementally update the array of
gl_vertex_array input pointers.
v2: Add some more comments.
Rename _vbo_array_init to _vbo_init_inputs.
Rename vbo_context::arrays to vbo_context::draw_arrays.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
During the patch series this VAO gets populated with either the currently
bound VAO or an internal VAO that will be used for immediate mode and
dlist rendering.
v2: More comments about the _DrawVAO, filter and enabled mask.
Rename _DrawVAOEnabled to _DrawVAOEnabledAttribs.
v3: Fix and move comment.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
At those places where we used get_vp_mode() use
gl_vertex_program_state::_VPMode instead.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
To get equivalent information than get_vp_mode(), track the vertex
processing mode in a per context variable at
gl_vertex_program_state::_VPMode.
This aims to replace get_vp_mode() as seen in the vbo module.
But instead of the get_vp_mode() implementation which only gives correct
answers past calling _mesa_update_state() this context variable is
immediately tracked when the vertex processing state is modified. The
correctness of this value is asserted on state validation.
With this in place we should be able to untangle the dependency with
varying_vp_inputs and state invalidation.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
We don't want filtering for integer textures, same as depth/stencil.
Fixes: KHR-GL45.direct_state_access.renderbuffers_storage_multisample
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Tested-by: Karol Herbst <kherbst@redhat.com>
We need to mark the range as valid, and validate the resource using a
helper to ensure that the buffer status is marked properly.
Fixes some CTS pipeline stats query tests, and
KHR-GL45.direct_state_access.queries_functional
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Tested-by: Karol Herbst <kherbst@redhat.com>
Two things were off:
- valid range was not updated, which could affect waiting for future
maps
- fencing was done manually instead of using the *_resource_validate
helper, which resulted in a missed dirty buffer flag being set
Fixes: KHR-GL45.direct_state_access.buffers_clear
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Tested-by: Karol Herbst <kherbst@redhat.com>
Somewhere along the way the Makefile changes got lost ...
Fixes: 4db78f3a6b "radv: Put supported extensions in a struct."
Acked-by: Dave Airlie <airlied@redhat.com>
This implements strict checking for the entrypoint ProcAddr
functions.
- InstanceProcAddr with instance = NULL, only returns the 3 allowed
entrypoints.
- DeviceProcAddr does not return any instance entrypoints.
- InstanceProcAddr does not return non-supported or disabled
instance entrypoints.
- DeviceProcAddr does not return non-supported or disabled device
entrypoints.
- InstanceProcAddr still returns non-supported device entrypoints.
Reviewed-by: Dave Airlie <airlied@redhat.com>
The MSVC version we (at VMware) primarily care about from now on is
2015.
See https://ci.appveyor.com/project/jrfonseca/mesa/build/46
We can drop support for building with 2013 in a future commit. I'm not
aware of significant changes in C99/C11 support from MSVC 2013 to 2015,
but there's no point in continuing supporting old MSVC versions when
nobody cares.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Otherwise the code size increases because the original fexp2()
instructions can't be deleted.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This disables persistence accross wavefronts.
F1 2017 and Wolfenstein 2 appear to use some coherent images
but this patch doesn't seem to change anything.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
We were only resolving the first.
v2:
- Do not require that the number of layers on dst and src are an
exact match, it is okay if the dst has more layers so long as
it has at least the same that we are going to resolve.
- Do not always resolve array_len layers, we should resolve
only from base_array_layer to array_len.
v3:
- v2 was assuming that array_len represented the total number of
layers in the image, but it represents the number of layers
starting at the base array ayer.
v4:
- The number of layers to resolve should be taken from the
framebuffer (Nanley).
Fixes new CTS tests for multisampled layered rendering:
dEQP-VK.renderpass.multisample_resolve.layers_*
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
The setTexBuffer2 hook from GLX is used to implement glxBindTexImageEXT
which has tighter restrictions than just "it's shared". In particular,
it says that any rendering to the image while it is bound causes the
contents to become undefined.
The GLX_EXT_texture_from_pixmap extension provides us with an acquire
and release in the form of glXBindTexImageEXT and glXReleaseTexImageEXT.
The extension spec says,
"Rendering to the drawable while it is bound to a texture will leave
the contents of the texture in an undefined state. However, no
synchronization between rendering and texturing is done by GLX. It
is the application's responsibility to implement any synchronization
required."
From the EGL 1.4 spec for eglBindTexImage:
"After eglBindTexImage is called, the specified surface is no longer
available for reading or writing. Any read operation, such as
glReadPixels or eglCopyBuffers, which reads values from any of the
surface’s color buffers or ancillary buffers will produce
indeterminate results. In addition, draw operations that are done
to the surface before its color buffer is released from the texture
produce indeterminate results
In other words, between the bind and release calls, we effectively own
those pixels and can assume, so long as we don't crash, that no one else
is reading from/writing to the surface. The GLX and EGL implementations
call the setTexBuffer2 and releaseTexBuffer function pointers that the
driver can hook.
In theory, this means that, between BindTexImage and ReleaseTexImage, we
own the pixels and it should be safe to track aux usage so we
can avoid redundant resolves so long as we start off with the right
assumption at the start of the bind/release pair.
In practice, however, X11 has slightly different expectations. It's
expected that the server may be drawing to the image at the same time as
the compositor is texturing from it. In that case, the worst expected
outcome should be tearing or partial rendering and not random corruption
like we see when rendering races with scanout with CCS. Fortunately,
the GEM rules about texture/render dependencies save us here. If X11
submits work to write to a pixmap after the compositor has submitted
work to texture from it, GEM inserts a dependency between the compositor
and X11. If X11 is using a high-priority context, this will cause the
compositor to get a temporarily boosted priority while the batch from
X11 is waiting on it. This means that we will never have an actual race
between X11 and the compositor so no corruption can happen.
Unfortunately, however, this means that X11 will likely be rendering to it
between the compositor's BindTexImage and ReleaseTexImage calls. If we
want to avoid strange issues, we need to be a bit careful about
resolves because we can't really transition it away from the "default"
aux usage. The only case where this would practically be a problem is
with image_load_store where we have to do a full resolve in order to use
the image via the data port. Even there it would only be a problem if
batches were split such that X11's rendering happens between the resolve
and the use of it as a storage image. However, the chances of this
happening are very slim so we just emit a warning and hope for the best.
This commit adds a new helper intel_miptree_finish_external which resets
all aux state to whatever ISL says is the right worst-case "default" for
the given modifier. It feels a little awkward to call it "finish"
because it's actually an acquire from the perspective of the driver, but
it matches the semantics of the other prepare/finish functions. This
new helper gets called in intelSetTexBuffer2 instead of make_shareable.
We also add an intelReleaseTexBuffer (we passed NULL to releaseTexBuffer
before) and call intel_miptree_prepare_external in it. This probably
does nothing most of the time but it means that the prepare/finish calls
are properly matched.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chadversary@chromium.org>
The old code made a new miptree that referenced the same BO as the
renderbuffer and just trusted in the memory aliasing to work. There are
only two ways in which the new miptree is liable to differ from the one
in the renderbuffer and neither of them matter:
1) It may have a different target. The only targets that we can ever
see in intelSetTexBuffer2 are GL_TEXTURE_2D and GL_TEXTURE_RECTANGLE
and the difference between the two doesn't matter as far as the
miptree is concerned; genX(update_sampler_state) only looks at the
gl_texture_object and not the miptree when determining whether or
not to use normalized coordinates.
2) It may have a very slightly different format. Again, this doesn't
matter because we've supported texture views for quite some time so
we always look at the gl_texture_object format instead of the
miptree format for hardware setup anyway.
On the other hand, because we were recreating the miptree, we were using
intel_miptree_create_for_bo which doesn't understand modifiers. We
really want this function to work without doing a resolve so long as you
have modifiers so we need to fix that.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chadversary@chromium.org>
This function is used to determine when we need to re-allocate a
miptree. Since we do nothing different in miptree allocation for
sRGB vs. linear, loosening this should be safe and may lead to less
copying and reallocating in some odd cases.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chadversary@chromium.org>
We're about to start letting the intel_obj->_Format be the "real"
texture format. For depth/stencil textures, this may be a combined
depth stencil format. For ETC2 on gen7 and earlier, this will be the
actual ETC2 format. This makes a bit more GL sense but means we have to
be careful in state upload.
Reviewed-by: Chad Versace <chadversary@chromium.org>
Both KHR_blend_equation_advanced and ARB_bindless_texture provide
layout qualifiers, and are exposed in compatibility contexts. We
need to parse the layout qualifier as a token in order for those
to work, but forgot to extend this check.
ARB_shader_image_load_store would need a similar treatment, but we
don't expose that in legacy OpenGL contexts.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105161
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Use a helper function for updating the swapchain status. This will be
used later to handle VK_SUBOPTIMAL_KHR, where we need to make a
non-error status stick to the swapchain until recreation. Instead of
direct comparisons to VK_SUCCESS to check for error, test for negative
numbers meaning an error status, and positive numbers indicating
non-error statuses.
v2 (Jason Ekstrand):
- Use a pattern of "return x11_swapchain_result(chain, VK_WHATEVER)"
- Handle wsi_queue_pull returning VK_TIMEOUT
- Call x11_swapchain_result in x11_present_to_x11
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This most likely means we lost our connection to the X server so
OUT_OF_DATE is reasonable. This was also the one case where we pushed a
UINT32_MAX into the queue without setting an error condition.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Daniel Stone <daniels@collabora.com>
zwp_linux_dmabuf_v1 lets us use multi-planar images and buffer
modifiers.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
For a bit there, we had a bug in i965 where it ignored the tiling of the
modifier and used the one from the BO instead. At one point, we though
this was best fixed by setting a tiling from Vulkan. However, we've
decided that i965 was just doing the wrong thing and have fixed it as of
5048572352.
The old assumptions also affected the solution we used for legacy
scanout in Vulkan. Instead of treating it specially, we just treated it
like a modifier like we do in GL. This commit goes back to making it
it's own thing so that it's clear in the driver when we're using
modifiers and when we're using legacy paths.
v2 (Jason Ekstrand):
- Rename legacy_scanout to needs_set_tiling
Reviewed-by: Daniel Stone <daniels@collabora.com>
This involves extending our fake extension a bit to allow for additional
querying and passing of modifier information. The added bits are
intended to look a lot like the draft of VK_EXT_image_drm_format_modifier.
Once the extension gets finalized, we'll simply transition all of the
structs used in wsi_common to the real extension structs.
Reviewed-by: Daniel Stone <daniels@collabora.com>
This was originally intended to make sure the remap location
was not -1. However the code has changed alot since then,
the location is now never set to -1 and we also handle
components meaning this old assert has been doing comparisions
with the pointer to the array of component data.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105183
Fixes assert in the glsl-1.50-gs-max-output-components piglit test.
Note that the double handling will only work for doubles that
don't take up multiple slots i.e. double and dvec2. However
dual slot double handling is an existing bug which is made no
worse by this patch.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Delaying unrolling and allowing NIR to do it instead has been shown
to result in better code in drivers such as i965. shader-db results
appear to show the same is true for radeonsi.
The other advantage is that using NIR unrolling improves compile
times significantly.
Totals from affected shaders:
SGPRS: 9624 -> 10016 (4.07 %)
VGPRS: 6800 -> 6464 (-4.94 %)
Spilled SGPRs: 0 -> 2 (0.00 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Private memory VGPRs: 0 -> 0 (0.00 %)
Scratch size: 0 -> 0 (0.00 %) dwords per thread
Code Size: 359176 -> 332264 (-7.49 %) bytes
LDS: 0 -> 0 (0.00 %) blocks
Max Waves: 1355 -> 1432 (5.68 %)
Wait states: 0 -> 0 (0.00 %)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Fixes the following piglit tests:
tests/spec/arb_tessellation_shader/execution/double-array-vs-tcs-tes.shader_test
tests/spec/arb_tessellation_shader/execution/double-vs-tcs-tes.shader_test
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The DRI3 drawable info struct currently stores a boolean for whether the
last completed operation was a flip or not. As we need to track the full
completion mode for handling suboptimal returns, change the 'flipping'
field to the raw present completion mode from the server.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
It's true for depth HiZ clears because we only have HiZ on single-slice
images right now. However, for stencil-only clears there is no such
restriction.
Tested-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Based on amdgpu hardware query information to check if UVD hevc enc support
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We have to increase the file index also for 0x10000 not just for values
greater than 0x10000.
Fixes: 37b67db6ae
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
This looks like it should be protected by the assume() about
nr_color_regions, but my compiler warns anyway.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Fixes: d32956935e ("glsl: Walk a list of ir_dereference_array to mark array elements as accessed")
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
My build was producing:
../src/loader/loader.c:121:67: warning: ‘%1u’ directive output may be truncated writing between 1 and 3 bytes into a region of size 2 [-Wformat-truncation=]
and we can avoid this careful calculation by just using asprintf (as we do
elsewhere in the file).
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
They should probably get unit tests implemented, but this cleans up a
bunch of warnings in my build for now.
Fixes: 59f458cd87 ("glsl: Add 16-bit types")
Cc: Eduardo Lima Mitev <elima@igalia.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This just avoids marking it as a used output if we don't
actually use it.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
dEQP-VK.tessellation.invariance.outer_edge_symmetry.triangles_equal_spacing_ccw
was hitting an llvm assert due to one value being an int and the
other a float.
This just casts both values to integer and fixes the test.
Fixes: dEQP-VK.tessellation.invariance.outer_edge_symmetry.triangles_equal_spacing_ccw
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Instead of having aux usage and ANV_AUX_USAGE_DEFAULT to mean "give me
something reasonable" we now use anv_layout_to_aux_usage whenever a
layout is available. If a layout is available, we ignore the aux_usage
parameter. For the cases where we have an explicit aux usage such as
clears and aux ops, we have a new ANV_IMAGE_LAYOUT_EXPLICIT_AUX layout.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
If we don't have HiZ, then anv_layout_to_aux_usage will return NONE for
both layouts. If the two layouts are the same, they will get the aux
usage. In either case, the code below will give us ISL_AUX_OP_NONE and
we'll return without doing anything.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
This is quite a bit cleaner because we now sync the clear values at the
same time as we do the fast clear. For loading the clear values into
the surface state, we now do it once when we handle the LOAD_OP_LOAD
instead of every subpass.
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
This requires us to ditch the VkAttachmentReference struct in favor of
an anv-specific struct. However, we can now easily identify from just
the subpass attachment what kind of an attachment it is. This will make
iteration over anv_subpass::attachments a little easier in some case.
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
This moves the decision out of begin_subpass and into BeginRenderPass
like the decision for color clears. We use a similar name for the
function for depth/stencil as for color even though no aux usage is
really getting computed.
v2 (Jason Ekstrand):
- Don't always disable HiZ clears by accident
- Use the initial layout to decide whether to do fast clears
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
This is similar to blorp_gen8_hiz_clear_attachments except that it takes
actual images instead of trusting in the already set depth state.
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
This doesn't really change much now but it will give us more/better
control over clears in the future. The one interesting functional
change here is that we are now re-emitting 3DSTATE_DEPTH_BUFFERS and
friends for each clear. However, this only happens at begin_subpass
time so it shouldn't be substantially more expensive.
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
This is a bit less awkward than passing in the subpass because it means
we don't have to extract the subpass id from the subpass.
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
This seems slightly more correct because it means that the flushes
happen before any clears or resolves implied by the subpass transition.
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Previously, we just used all the channels regardless of the format.
This is less than ideal because some channels may have undefined values
and this should be ok from the client's perspective. Even though the
driver should do the correct thing regardless of what is in the
undefined value, it makes things less deterministic. In particular, the
driver may choose to fast-clear or not based on undefined values. This
level of nondeterminism is bad.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
This fixes a pile of hangs caused by the recent shuffling of resolves
and transitions. The particularly problematic case is when you have at
least three attachments with load ops of CLEAR, LOAD, CLEAR. In this
case, we execute the first CLEAR followed by a MI memcpy to copy the
clear values over for the LOAD followed by a second CLEAR. The MI
commands cause the first CLEAR to hang which causes us to get stuck on
the 3DSTATE_MULTISAMPLE in the second CLEAR.
We also add guards for BLORP to fix the same issue. These shouldn't
actually do anything right now because the only use of indirect clears
in BLORP today is for resolves which are already guarded by a render
cache flush and CS stall. However, this will guard us against potential
issues in the future.
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Nanley Chery <nanley.g.chery@intel.com>
Was hitting an assert with vs-varying-array-mat4-index-col-row-wr.shader_test
When eliminating a copy, we were dropping the use_count of the mov that
is skipped, but not increasing the use_count of it's src instruction.
Fixes: 76440fcca9 freedreno/ir3: clean up dangling false-dep's
Signed-off-by: Rob Clark <robdclark@gmail.com>
In the case of NVIDIA hardware, ABGR is displayable but ARGB is not.
Only advertise the one set in the visuals list.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Split up the op properties table into generation-specific bits, and only
use the kepler ones on kepler. Fixes some CTS images tests.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
All this information can be retrieved from the TIC directly. Avoid
having to dip into the constbuf information about the image.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
By default, 3DSTATE_CONSTANT_* Constant Buffer 0 is relative to dynamic
state base address. This makes it unusable for pushing UBOs.
There is a bit in the INSTPM register (or CS_DEBUG_MODE2 on Skylake)
which controls whether buffer 0 is relative to dynamic state base
address, or simply a normal pointer. Setting that gives us full
flexibility. This lets us push up to 4 UBO ranges.
We can't currently write this on Haswell and earlier, and will need
to update the kernel command parser, and then do the whole version
checking song and dance. We also need a brand new kernel that supports
context isolation - on older kernels, newly created contexts inherit
register state from whatever happened to be running. So, setting this
would have catastrophic impact on other drivers such as libva, Beignet,
or older Mesa.
See commit 8ec5a4e4a4 where we did this
once before, but had to revert it in commit 013d331220.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Kernel 4.16 has proper context isolation, which means we can change
the L3 configuration without worrying about that leaking to other
newly created contexts, breaking the assumptions of other userspace.
So, disable our workaround to reprogram it back to the default.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
GP10B requires the use of GP100_COMPUTE_CLASS instead of
GP104_COMPUTE_CLASS as is used for other non-GP100 chips.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
The previous commit reworked the checks intel_from_planar() to check the
right individual cases for regular/planar/aux buffers, and do size
checks in all cases.
Unfortunately, the aux size check was broken, and required the aux
surface to be allocated with the correct aux stride, but full image
height (!).
As the ISL aux surface is not recorded in the DRIimage, we cannot easily
access it to check. Instead, store the aux size from when we do have the
ISL surface to hand, and check against that later when we go to access
the aux surface.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Fixes: c2c4e5bae3 ("i965: Fix bugs in intel_from_planar")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
State trackers must use a user buffer or const_uploader,
or set pipe_resource::flags same as const_uploader->flags.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
The PIPE_CONTROL command description says:
"Whenever a Binding Table Index (BTI) used by a Render Taget Message
points to a different RENDER_SURFACE_STATE, SW must issue a Render
Target Cache Flush by enabling this bit. When render target flush
is set due to new association of BTI, PS Scoreboard Stall bit must
be set in this packet."
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Meta is awful and we'd like to stop using it. Implementing this using
BLORP allows us to stop trashing a bunch of GL state every time.
This follows the structure of st_generate_mipmap().
compute_num_levels is lifted directly from there.
Improves performance in Gl41HdrBloom by about 11.794% +/- 1.01919% (n=3)
on Kabylake GT2 at 1280x720 (the difference seems much smaller at higher
resolutions).
v2 (idr): Don't try depth or depth-stencil blorp blits on Gen4 or Gen5
because it's not implemented yet.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
I want to use compute_num_levels inside i965. Rather than duplicating
it, move it from mesa/st to core Mesa, and make it non-static.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Consolidate archrst draw events into single draw event with an attribute
that represents the type of draw
- Add handlers for new private proto versions of DrawInstancedEvent,
DrawIndexedInstancedEvent, DrawInstancedSplitEvent, and
DrawIndexedInstancedSplitEvent
- Convert the draw events to generic DrawInfoEvents
- parse_proto_event_fields() replaces 'AR_DRAW_TYPE' as a field type with
'uint32_t'. This draw type is actually an enum, but can be represented
as an unsigned integer.
- is_draw_or_dispatch() recognizes DrawInfoEvent as a draw event
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Convert portions of the C sampler to the rasty SIMD lib.
Also fix SRL call with a non-immediate. Don't count on the compiler
automagically converting an srli call to srl if the shift count isn't
an immediate.
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Use a new function to denote that we want to get offset to next component
and hide the fact that GEP is used underneath.
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Use llvm intrinsic masked.gather instead of manual unroll for the cases
where we have vector of pointers. Improves llvm IR debug experience by
reducing a ton of IR to a single intrinsic call. Also seems to reduce
overall stack use considerably.
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Fix invalid number of attributes passed into tesselation PA.
Needs to take into account any offsets from the shader.
Innocuous issue, but removes an assert firing in debug.
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Split into two proto files and modify appropriate build rules for
configure / scons / meson builds.
There are private internal events (proxy) that communicate information
from rasterizer to ArchRast. ArchRast can use these events to calculate
a final answer and then emit other public events which will be saved to
file. Users will use the public proto file and not the private one.
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
As the comment notes: linux-dmabuf has nothing to do with wayland-drm,
but we need a single place to build these files we can use from both EGL
and Vulkan, which is guaranteed to be included before both EGL and
Vulkan WSI.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.co.uk>
v2: just tell the compiler to assume the format will always be found, as
it comes from the table itself to begin with. (DanielS)
CID: 1429516
Fixes: d32b23f383 "egl/wayland: Add bpp to visual map"
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Doesn't really change anything to the test though ¯\_(ツ)_/¯
CID: 1429511
Fixes: e8495646af "glsl/tests: changes to test_disk_cache_create test"
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
The gallium query types changed, so we need to remap from the
gallium ones to the virgl ones.
Fixes:
dEQP-GLES3.functional.transform_feedback.basic_types*
"This also fixes:
dEQP-GLES3.functional.transform_feedback.array.separate*
dEQP-GLES3.functional.transform_feedback.array_element*
dEQP-GLES3.functional.transform_feedback.interpolation.*
Gallium's p_defines.h and virglrenderer's p_defines.h have diverged
quite a bit, so not including
PIPE_QUERY_OCCLUSION_PREDICATE_CONSERVATIVE there makes sense for now."
- Gurchetan Singh
Fixes: 3f6b3d9db (gallium: add PIPE_QUERY_OCCLUSION_PREDICATE_CONSERVATIVE)
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Tested-by: Gurchetan Singh <gurchetansingh@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From PIPE_CONTROL command description in gfxspecs:
"Whenever a Binding Table Index (BTI) used by a Render Taget Message
points to a different RENDER_SURFACE_STATE, SW must issue a Render
Target Cache Flush by enabling this bit. When render target flush
is set due to new association of BTI, PS Scoreboard Stall bit must
be set in this packet."
V2: Move the PIPE_CONTROL to update_renderbuffer_surfaces() in
brw_wm_surface_state.c (Ken).
Fixes a fulsim error and a GPU hang described in below JIRA.
JIRA: MD5-322
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Sampling from hiz is enabled in i965 for GEN9+ but this feature has
been removed from gen11. So, this new flag will be useful to turn
the feature on/off for different gen h/w. It will be used later
in a patch adding device info for gen11.
Suggested-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
SIMD4x2 dispatch mode has been removed in GEN11. We're not using
it anyways in Mesa. Adding few asserts to make it explicit.
Use GEN_GEN macro in place of devinfo->gen (Ken)
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Nothing is changed here from gen10 to gen11. So, just update
the assert.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
StateCacheInvalidation is required on all gen7+ platforms. We
don't need to update this check for every new gen h/w unless
this requirement is changed. So, dropping the check for latest
gen h/w.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
These only existed to avoid making people update libdrm for new uABI
headers. A while ago we imported those headers into the Mesa repo,
so the dependency is gone and these are no longer useful.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
r325155 ("Pass a reference to a module to the bitcode writer.")
and
r325160 ("Pass module reference to CloneModule")
change function interface from pointer to reference.
v2: Fix indentation (tab instead of spaces)
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
This needs to link the state tracker with --whole-archive to expose the
right symbols.
v4: - Always add libswdri and libswkmsdri to the link_with list
Fixes: 22a817af8a ("meson: build gallium xvmc state tracker")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This needs to use --whole-archive (link_whole in meson) to properly
expose symbols.
v4: - Always add libswdri and libswkmsdri to link_with list
Fixes: 0ba909f0f1 ("meson: build gallium xa state tracker")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This needs to use --whole-archive (link_whole in meson) to properly
expose symbols.
v4: - Always add libswdri and libswkmsdri to link_with
Fixes: 1d36dc674d ("meson: build gallium omx state tracker")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The state tracker needs to be linked with whole-archive (like
autotools). As a result there are symbols from libswdri and libswkmsdri
that are needed, so link those as well.
v4: - Always add libswdri and libswkmsdri to link_with list
Fixes: 5a785d51a6 ("meson: build gallium va state tracker")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The VDPAU state tracker needs to be linked with whole-archive (autotools
does this). Because we are linking the whole archive we alos need to
link with libswdri and libswkmsdri if those have been enabled.
v4: - Always add libswdri and libswkmsdri to link_with list
Fixes: 68076b8747 ("meson: build gallium vdpau state tracker")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This makes the dependencies easier to manage, since each media target
doesn't need to worry about linking to half a dozen libraries.
Fixes: b1b65397d0 ("meson: Build gallium auxiliary")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This allows these variables to unconditionally included in `link_with`
lists, even if they're not used. This allows deleting duplicated logic
in nearly every gallium target implemented in meson today. This also
removes the now useless `build_by_default` flag from swdri and swkmsdri.
v4: - add this patch
Fixes: 66c94b9313
("meson: build gallium winsys for dri, null, and wrapper")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This reverts commit 10d1b0be8e.
This is unnecessary, the depend_files argument is for adding
dependencies on files that are not part of the input, which is already
done.
cc: Jason Ekstrand <jason.ekstrand@intel.com>
Fixes: 10d1b0be8e
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Move the calls to svga_hwtnl_set_fillmode() and svga_hwtnl_set_flatshade()
out of the two retry_draw_*() functions to the svga_draw_vbo() function.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
This fixes a few Piglit transform feedback regressions caused by
commit 7a1401938b.
In that change I moved the moved svga_update_state() into the loops,
after the calls to svga_hwtnl_set_flatshade(). But
svga_hwtnl_set_flatshade() actually depends on some derived shader
state. This patch moves the svga_update_state() call into
svga_draw_vbo() so it's not duplicated in two places.
Fixes: 7a1401938b ("svga: clean up retry_draw_range_elements(),
retry_draw_arrays()")
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
If we fail to compile the normal VS or FS we fall back to a simple/
dummy shader. We need to rescan the the shader to update the shader
info. Otherwise, this can lead to further translations failures
because the shader info doesn't match the actual shader.
Found by adding some extra debug assertions in the state-update code
while debugging something else.
v2: also update shader generic_inputs/outputs, etc. per Charmaine
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
In theory this might lead to corruption if we bind a descriptor
set which is unused, because LLVM is smart and it can re-use
unused user SGPRs. In practice, this doesn't seem to fix
anything.
As a side effect, this will reduce the number of emitted
SH_REG packets.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Although meta shaders don't use any vertex buffers, there is no
behaviour change but I think it's better to do this. Though,
this saves two user SGPRs for push constants inlining or
something else.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
It was assumed that fromPlanar() could return NULL to mean
that the planar image is the same as the parent DRI image.
That assumption wasn't made everywhere though.
Let's fix things and make sure that all callers understand
a NULL result
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
The ARB_viewport_array spec says:
"Dependencies
OpenGL 1.0 is required.
OpenGL 3.2 or the EXT_geometry_shader4 or ARB_geometry_shader4 extensions
are required.
This extension is written against the OpenGL 3.2 (Compatibility)
Specification."
As such, we should ignore it for GLES2 contexts.
Fixes:
dEQP-GLES2.functional.state_query.integers.viewport_getinteger
dEQP-GLES2.functional.state_query.integers.viewport_getfloat
on llvmpipe and virgl.
v2: Use _mesa_has_* (Ilia)
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Cc: 17.3 18.0 <mesa-stable@lists.freedesktop.org>
Generators really are never the thing you want. The problem in this case
is that a generator must create a file that contains any file that the
generated target depends on. Since brw_oa.py doesn't generate such a
file the generated sources are not regenerated even if the xml files
they should depend on changes.
While we could change brw_oa.py to write such a file, that's silly, it
depends on itself and the xml file. So we'll just use a custom target
instead, which will have the correct dependency behavior and doesn't
really add that much code.
Fixes: 3218056e0e ("meson: Build i965 and dri stack")
CC: Ian Romanick <idr@freedesktop.org>
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
From Skylake PRM Surface Formats section:
"The surface format for the typed atomic integer operations must
be R32_UINT or R32_SINT."
Fixes an error and a piglit GPU hang in simulation environment.
Piglit test: gl45-imageAtomicExchange-float.shader_test
Suggested-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.co
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "18.0 17.3" <mesa-stable@lists.freedesktop.org>
When initializing mcs, map with MAP_RAW and fill in the linear
map. Removes a place where gtt mapping is used.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
In all current uses, the linear surface is only allocated starting
at (xt1, yt1) anyway, so this improves the calling ergonomics.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
TileY's low 6 address bits are: v1 v0 u3 u2 u1 u0
Thus a cache line in the tiled surface is composed of a 2d area of
16x4 bytes of the linear surface.
Add a special case where the area being copied is 4-line aligned
and a multiple of 4-lines so that entire cache lines will be
written at a time.
On Apollolake, this increases tiling throughput to wc maps by
84.0103% +/- 0.862818%
v2: Split [y0, y1) and [y2, y3) loops apart for clarity (Jason Ekstrand)
v3: Don't reset src var (Jason), Ensure y0 <= y1 <= y2 <= y3
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This code to re-set the type of the source and destination is not
necessary since we never manipulate the types. Looks like a
left over from a time where we had to retype to float temporarily
to handle 64-bit inputs.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Divide it by two as we do for other stages. This is because the
component layout qualifier is always in 32-bit units.
Fixes issues in a new CTS test (still WIP):
KHR-GL45.enhanced_layouts.varying_double_components
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
This fixes a regression in the broadcast color to all color bufs case.
Fixes: 6c691081a (r600: fixup sparse color exports.)
Signed-off-by: Dave Airlie <airlied@redhat.com>
I found a shader with
DCL TEMP[0], LOCAL
DCL TEMP[1..256], ARRAY(1), LOCAL
DCL TEMP[257..512], ARRAY(2), LOCAL
DCL TEMP[513..768], ARRAY(3), LOCAL
DCL TEMP[769], LOCAL
This would remap badly, as it would add up all the spilled sizes
and subtract it from the temp for 0. If the current temp is less
than the array start break out.
Fixes: 1d871aa6 (r600g: Implement spilling of temp arrays (v2))
Signed-off-by: Dave Airlie <airlied@redhat.com>
Shaders coming from dx10 state trackers have a RET before the END.
And the epilog needs to be placed before the RET (otherwise it will
get ignored).
Hence figure out if a RET is in main, in this case we'll place
the epilog there rather than before the END.
(At a closer look, there actually seem to be problems with control
flow in general with output redirection, that would need another
look. It's enough however to fix draw's aa line emulation in some
internal bug - lines tend to be drawn with trivial shaders, moving
either a constant color or a vertex color directly to the output).
v2: add assert so buggy handling of RET in main is detected
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Nobody queries these and nobody sets them to anything useful,
the docs say TODO.
Drop them until a use appears.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Add support for GL_NUM_SHADING_LANGUAGE_VERSIONS
and glGetStringi for GL_SHADING_LANGUAGE_VERSION
v2:
- Combine similar functionality into
_mesa_get_shading_language_version() function.
- Change GLSL version return mechanism.
v3:
- Add return of empty string for GLSL ver 1.10.
- Move _mesa_get_shading_language_version() function
to src/mesa/main/version.c.
v4:
- Add OpenGL version check.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104915
Signed-off-by: Andriy Khulap <andriy.khulap@globallogic.com>
Signed-off-by: Vadym Shovkoplias <vadym.shovkoplias@globallogic.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
The EXTRA_VERSION_40 predicate is tested as part of
extra_gl40_ARB_sample_shading but there was no switch case for it.
Fixes: 77b440e42d ("mesa: Add new functions and enums required
by GL_ARB_sample_shading")
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
This struct allows us to report:
- accurate max point size/line width.
- accurate texel and texture gather offsets
- vertex/geometry limits.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Let's use the new gl_state_index16 type everywhere and remove
the typecasts.
This helps reduce the size of gl_program_parameter.
Reviewed-by: Brian Paul <brianp@vmware.com>
All drivers convert these to float, so there is no reason to use double.
The piglit test that expects double precision from glGet will be adjusted
not to require it (there is a piglit patch).
gl_context::ViewportArray: 512 -> 384 bytes
Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
GL allows doing glTexEnv on 192 texture units, while in reality,
only MaxTextureCoordUnits units are used by fixed-func shaders.
There is a piglit patch that adjusts piglits/texunits to check only
MaxTextureCoordUnits units.
Reviewed-by: Brian Paul <brianp@vmware.com>
We were setting current_pipeline to UINT32_MAX and then calling
cmd_cmd_state_reset which memsets the entire state struct to 0 which
implicitly resets current_pipeline to 3D. I have no idea how this
hasn't caused everything to explode.
Fixes: cd3feea745 "anv/cmd_buffer: Rework anv_cmd_state_reset"
cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
The previous code was trying to avoid non-existent layers by taking a
MAX with anv_image_aux_layers. Unfortunately, it wasn't taking into
account that layer_count starts at base_layer which may not be zero.
Instead, we need to subtract base_layer from anv_image_aux_layers with
a guard against roll-over.
Fixes: de3be61801 "anv/cmd_buffer: Rework aux tracking"
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
This commit fixes two bugs in intel_from_planar. First, if the planar
format was non-NULL but only had a single plane, we were falling through
to the planar case. If we had a CCS modifier and plane == 1, we would
return NULL instead of the CCS plane. Second, if we did end up in the
planar_format == NULL case and the modifier was DRM_FORMAT_MOD_INVALID,
we would end up segfaulting in isl_drm_modifier_has_aux.
Cc: mesa-stable@lists.freedesktop.org
Fixes: 8f6e54c929
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Even switching the def's condition to be the same chip revision check as
the use, the compiler doesn't figure it out. Just NULL-init it.
Fixes: ec53e52742 ("ac/nir: Add ES output to LDS for GFX9.")
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
My gcc doesn't figure out that dims >= 1 (seems reasonable), and doesn't
notice that ddmax is used from the same no_rho_opt as its initialization.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
The kernel used to have execbuf parameters to program the INSTPM bit
for whether 3DSTATE_CONSTANT_* should be relative to dynamic state
base address or an absolute address. However, they never worked in
the presence of hardware contexts, so I deleted them a while back.
It doesn't make sense to set this flag, as it doesn't exist anymore.
It also never did anything anyway - the flag is zero, so |'ing it in
did nothing. The default is relative anyway.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The compiler doesn't know that num_visuals > 0.
Fixes: 37a8d907cc ("egl/gbm: Ensure EGLConfigs match GBM surface format")
Reviewed-by: Daniel Stone <daniels@collabora.com>
Flush a resource's previous write_batch synchronously. Because a
resource's associated batches are not updated until after the flush
thread submits rendering to the kernel, this was causing a bit of
confusion in the following loop. This fixes a bug that appeared with
recent stk.
Perhaps we need to re-work things a bit to clear out dependent patches
in the ctx's thread and use a fence to deal with the period between
when a flush is queued and when it is submitted to the kernel. But
this will do until time permits a larger refactor.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Because of loops, we can't schedule all of a block's predecessors first.
Instead just assume that the result consumed in a block was written far
enough away in all paths into a block. And do an intra-block scheduling
pass to figure out if there are any cases where we need to insert extra
nop's. This works out better than always assuming the worst case (ie.
that a value live into a block was written in the last instruction in
the predecessor block).
Signed-off-by: Rob Clark <robdclark@gmail.com>
Normally false-deps are not something to consider, since they mostly
exist for delay-slot related reasons:
* barriers
* ordering writes after read
* SSBO/image access ordering
The exception is a false-dependency on an array store.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Previously we didn't handle flow control in legalize, and instead just
set (ss)(sy) on the first instruction in every block. Which isn't very
clever.
Instead, consider output state of all predecessor blocks, so we only
set a sync bit if needed for any possible path leading into a block.
Because of loops, we can't require that all successor blocks are
legalized before a given block, so instead run in a loop until results
converge.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Maybe there is a better way for this.. where it comes useful is "array"
loads, which end up as a false-dep for a later array store.
If all the uses of an array load are CP'd into their consumer, it still
leaves the dangling array load, leading to funny things like:
mov.u32u32 r5.y, r0.y
mov.u32u32 r5.y, r0.z
Signed-off-by: Rob Clark <robdclark@gmail.com>
Generally seems to do worse on instruction count and register usage,
according to shader-db. But shader-db also doesn't do a very good job
of weighting loop bodies, so that might not be totally valid.
So add an env variable to enable GCM pass for easier experimentation.
Signed-off-by: Rob Clark <robdclark@gmail.com>
There are more useful nir passes added since initial conversion to nir.
But ir3 was never updated to use them.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Agressively lowering all if/else to selects in some extreme cases
results in much higher register pressure. Using peephole select instead
with a modest threshold speeds up alu2 4x!
16 seems like a good limit, low enough to help alu2 but not too low that
it penalizes everything else. With a bit better scheduling of the
instruction that moves a value into a predicate register, we might be
able to lower this limit a bit more in the future, but since we need 6
cycles from the move to predicate register to predicated branch, that
puts some sort of lower bound on how far we can lower this threshold.
Signed-off-by: Rob Clark <robdclark@gmail.com>
nir's from_ssa pass is much better at avoiding inserting extra moves
than our logic is. And lowering phi webs to regs just treats anything
involved in a phi web as an array of length=1. Which with previous
array related fixes in RA/etc ends up working out quite well. This cuts
down on extra instructions and also helps with register pressure.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Makes it easier to compare values seen in-game (where there are many
shaders) to cmdline standalone compiler.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Seems to be there since a3xx, but we always lowered fsat. But we can
shave some instructions, especially in shaders that use lots of
clamp(foo, 0.0, 1.0) by not lowering fsat.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Use livein state of other blocks to extend liverange of arrays when they
are still needed by successor blocks.
Signed-off-by: Rob Clark <robdclark@gmail.com>
When eliminating movs, the instruction that is now directly using the
src of the mov has the same scheduling order constraints as the original
mov instruction.
Signed-off-by: Rob Clark <robdclark@gmail.com>
The number of bits depends on generation. But printing negative values
with a5xx encoding (largest size) but compiling for a3xx or a4xx, would
result in negative values printed as large positive values.
I guess in practice huge negative branch offsets aren't likely (and if
that is the case, the shader is probably too big to grok by reading the
assembly). So just print using smallest bitfield size.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Fix the following:
warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but
argument 3 has type ‘uint64_t {aka long long unsigned int}.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
We move the nir check before the shader cache call so that we can
call a nir based caching function in a following patch.
Also with this change we simply check if vertex shaders support
NIR rather than looping over the stages as mixing of shader types
is not supported anyway.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Clover now checks PIPE_SHADER_CAP_SUPPORTED_IRS for native support instead.
This change indirectly enables NIR support for compute shaders
on radeonsi.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
PIPE_SHADER_CAP_PREFERRED_IR was conflicting with PIPE_SHADER_IR_NIR
for compute shaders, so we let clover pick the one it wants to use.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Fixes the following piglit test:
./bin/arb_vertex_attrib_64bit-check-explicit-location -auto -fbo
Where we would end up with the nir such as:
vec1 64 ssa_11 = pack_64_2x32_split ssa_9, ssa_10
vec1 32 ssa_12 = f2f32 ssa_2
And our pack_64_2x32_split nir to llvm code always produces
a 64bit integer as output.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
When we create an EGL window surface on a GBM surface, ensure that the
EGLConfig is compatible with the GBM format, notwithstanding XRGB/ARGB
interchange.
For example, rendering with an XRGB8888 EGLConfig on to an ARGB8888
gbm_surface (and vice-versa) are acceptable, but rendering with an
XRGB2101010 EGLConfig on to an XRGB8888 gbm_surface will now be
rejected.
This was previously allowed through; when 10bpc formats were enabled,
clients which picked a completely random EGL config and hoped/assumed
they were XRGB8888 would break.
If you have bisected a failure to start a GBM/KMS client to this commit,
please look at its EGLConfig selection (e.g. through eglChooseConfigs),
and add an EGL_NATIVE_VISUAL_ID == gbm_surface format match to the
attribs for config selection.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Ilia Mirkin <imirkin@alum.mit.edu>
Now that we have mask/channel information in gbm_dri's format conversion
table, we can remove the copy in EGL.
As this table contains more formats (notably including R8 and RG8, which
can be used for BO but not surface allocation), we now compare the masks
of all channels when trying to find a suitable config. Without doing
this, an XRGB8888 EGLConfig would match on an R8 format.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Ilia Mirkin <imirkin@alum.mit.edu>
Each Wayland EGLDisplay currently contains a struct with one vector of
modifiers per format, hardcoded in the header. To allow easier support
for more formats, turn this into an array of u_vectors which is opaque
outside of platform_wayland.c.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Ilia Mirkin <imirkin@alum.mit.edu>
Both the DRI2 GetBuffersWithFormat interface, and SHM buffer allocation,
had their own format -> bpp lookup tables. Replace these with a lookup
into the visual map.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Ilia Mirkin <imirkin@alum.mit.edu>
When trying to translate between DRIImage format enums and FourCC codes,
use our visual map rather than an open-coded subset.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Ilia Mirkin <imirkin@alum.mit.edu>
When creating a wl_buffer on an upstream Wayland display from an
existing EGLImage, use the dri2_wl_visual map rather than another
hardcoded list of formats.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Ilia Mirkin <imirkin@alum.mit.edu>
Extend the visual map from only containing names and bitmasks, to also
carrying the three format enums we need. These are the DRIImage format
tokens for internal allocation, FourCC codes for wl_drm and dmabuf
protocol, and wl_shm codes for swrast drivers.
We will later use these formats to eliminate a bunch of open-coded
conversions.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Ilia Mirkin <imirkin@alum.mit.edu>
Widen the channel masks given in the visual table to the full width of
the pixel format, i.e. as many leading zeros as required.
No functional change.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Ilia Mirkin <imirkin@alum.mit.edu>
When 0b2b719121 moved from an if tree to a struct to map between
wl_drm formats and EGLConfigs, it transposed the mapping between XRGB
and ARGB. Luckily, everyone exposes both formats, so this is harmless.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Fixes: 0b2b719121 ("egl/wayland: introduce dri2_wl_add_configs_for_visuals() helper")
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Ilia Mirkin <imirkin@alum.mit.edu>
Non-MRT cases always translate blend state for 1 color buffer only.
MRT cases only check and translate blend state for enabled color buffers.
This also avoids an assertion failure in translate_blend for:
dEQP-GLES31.functional.draw_buffers_indexed.overwrite_common.common_advanced_blend_eq_buffer_blend_eq
Reviewed-by: Eric Anholt <eric@anholt.net>
Include the Mesa version and detail about the platform.
Signed-off-by: Mark Thompson <sw@jkqxz.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
It is present from libva 2.1 (VAAPI 1.1.0 or higher).
Signed-off-by: Mark Thompson <sw@jkqxz.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
This patch moves disk cache path and index creation back to the
constructor which matches previous behavior. We still allow create
to succeed without path so that cache can be used with callback
functionality.
Fixes: c95d3ed091 "disk cache: create cache even if path creation fails"
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Initialize to TGSI_TEXTURE_BUFFER (== 0), same as was done before the
variable type was changed to enum tgsi_texture_type.
Fixes a bunch of piglit failures with radeonsi, e.g.:
gles-3.0-transform-feedback-uniform-buffer-object: ../../../../src/gallium/auxiliary/tgsi/tgsi_util.c:502: tgsi_util_get_texture_coord_dim: Assertion `!"unknown texture target"' failed.
Corresponding compiler warning:
CXX state_tracker/st_glsl_to_tgsi.lo
../../../src/mesa/state_tracker/st_glsl_to_tgsi.cpp: In function ‘pipe_error st_translate_program(gl_context*, uint, ureg_program*, glsl_to_tgsi_visitor*, const gl_program*, GLuint, const ubyte*, const ubyte*, const ubyte*, const ubyte*, const ubyte*, GLuint, const ubyte*, const ubyte*, const ubyte*)’:
../../../src/mesa/state_tracker/st_glsl_to_tgsi.cpp:5992:23: warning: ‘tex_target’ may be used uninitialized in this function [-Wmaybe-uninitialized]
ureg_memory_insn(ureg, inst->op, dst, num_dst, src, num_src,
~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
inst->buffer_access,
~~~~~~~~~~~~~~~~~~~~
tex_target, inst->image_format);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../../src/mesa/state_tracker/st_glsl_to_tgsi.cpp:5866:27: note: ‘tex_target’ was declared here
enum tgsi_texture_type tex_target;
^~~~~~~~~~
Fixes: 9f9ce1625f ("st/mesa: use TGSI enum types in st_glsl_to_tgsi.cpp")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This is already handled at link_uniform_blocks, specifically at
process_block_array_leaf.
Additionally, this code was not handling correctly arrays of
arrays. When creating the name of the block to set the binding, it
only took into account the first level, so any attempt to set a
explicit binding on a array of array ubo would trigger an assertion.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Instead of updating all modified gl_vertex_array_object::_VertexArray
entries just update those that are modified and enabled.
Also release buffer object from the _VertexArray that belong
to disabled attributes.
v2: Also set Ptr and Size to zero.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
Set the _DrawArray pointer to NULL when calling into the Drivers
Bitmap/CopyPixels/DrawAtlasBitmaps/DrawPixels/DrawTex hooks.
This fixes an assert that gets uncovered when the following
patch gets applied.
v2: Mute from within the state tracker instead of generic mesa.
v3: Avoid evaluating _DrawArrays from within st_validate_state.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
When changing the attribute binding in the VAO we also need to
account for getting rid of non vbo bits from VertexAttribBufferMask.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
When NIR is enabled, TGSI must not be used. When NIR is disabled, TGSI
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Now that we're tracking aux properly per-slice, we can enable this for
applications which actually care.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
This commit completely reworks aux tracking. This includes a number of
somewhat distinct changes:
1) Since we are no longer fast-clearing multiple slices, we only need
to track one fast clear color and one fast clear type.
2) We store two bits for fast clear instead of one to let us
distinguish between zero and non-zero fast clear colors. This is
needed so that we can do full resolves when transitioning to
PRESENT_SRC_KHR with gen9 CCS images where we allow zero clear
values in all sorts of places we wouldn't normally.
3) We now track compression state as a boolean separate from fast clear
type and this is tracked on a per-slice granularity.
The previous scheme had some issues when it came to individual slices of
a multi-LOD images. In particular, we only tracked "needs resolve"
per-LOD but you could do a vkCmdPipelineBarrier that would only resolve
a portion of the image and would set "needs resolve" to false anyway.
Also, any transition from an undefined layout would reset the clear
color for the entire LOD regardless of whether or not there was some
clear color on some other slice.
As far as full/partial resolves go, he assumptions of the previous
scheme held because the one case where we do need a full resolve when
CCS_E is enabled is for window-system images. Since we only ever
allowed X-tiled window-system images, CCS was entirely disabled on gen9+
and we never got CCS_E. With the advent of Y-tiled window-system
buffers, we now need to properly support doing a full resolve of images
marked CCS_E.
v2 (Jason Ekstrand):
- Fix an bug in the compressed flag offset calculation
- Treat 3D images as multi-slice for the purposes of resolve tracking
v3 (Jason Ekstrand):
- Set the compressed flag whenever we fast-clear
- Simplify the resolve predicate computation logic
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Even though the blorp pass looks a bit on the sketchy side, the end
result in the Vulkan driver is very nice. Instead of having this weird
case where you do a fast clear and then maybe have to resolve, we just
do the ambiguate and are done with it. The ambiguate does exactly what
we want of setting all the CCS values to 0 which puts it into the
pass-through state.
This should also improve performance a bit in certain cases. For
instance, if we did a transition from UNDEFINED to GENERAL for a surface
that doesn't have CCS enabled all the time, we would end up doing a
fast-clear and then a full resolve which ends up touching every byte in
the main surface as well as the CCS. With the ambiguate pass, that
transition only touches the CCS.
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Now that this isn't a multi-case if and it's just the one case, it's a
bit clearer if the condition is just part of the if instead of being
pulled out into a boolean variable.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
This pass performs an "ambiguate" operation on a CCS-compressed surface
by manually writing zeros into the CCS. On gen8+, ISL gives us a fairly
detailed notion of how the CCS is laid out so this is fairly simple to
do. On gen7, the CCS tiling is quite crazy but that isn't an issue
because we can only do CCS on single-slice images so we can just blast
over the entire CCS buffer if we want to.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
The current strategy we use for managing resolves has an issues where we
track clear colors and the need for resolves per-LOD but we still allow
resolves of only a subset of the slices in any given LOD and doing so
sets the "needs resolve" flag for that LOD to false while leaving the
remaining layers unresolved. This patch is only the first step and does
not, by itself fix anything. However, it's fairly self-contained and
splitting it out means any performance regressions should bisect to this
nice obvious commit rather than to the giant "rework aux tracking"
commit.
Nanley and I did some testing and none of the applications we tested
even tried to fast-clear anything other than the first slice of an
image. The test was done by adding a printf right before we call
blorp_fast_clear if we were every going to touch any slice other than
the first with a fast-clear. Due to the way the original code was
structured, this would not have included applications which only cleared
a subset of layers. The applications tested were:
* All Sascha Willems demos
* Aztec Ruins
* Dota 2
* The Talos Principle
* Mad Max
* Warhammer 40,000: Dawn of War III
* Serious Sam Fusion 2017: BFE
While not the full list of shipping applications, it's a pretty good
spread and covers most of the engines we've seen running on our driver.
If this is ever shown to be a performance problem in the future, we can
reconsider our strategy.
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Currently, this helper does nothing but we call it every place where an
image is written through the render pipeline. This will allow us to
properly mark the aux state so that we can handle resolves correctly.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
This moves it to being based on layout_to_aux_usage instead of being
hard-coded based on bits of a priori knowledge of how transitions
interact with layouts. This conceptually simplifies things because
we're now using layout_to_aux_usage and layout_supports_fast_clear to
make resolve decisions so changes to those functions will do what one
expects.
There is a potential bug with window system integration on gen9+ where
we wouldn't do a resolve when transitioning to the PRESENT_SRC layout
because we just assume that everything that handles CCS_E can handle it
all the time. When handing a CCS_E image off to the window system, we
may need to do a full resolve if the window system does not support the
CCS_E modifier. The only reason why this hasn't been a problem yet is
because we don't support modifiers in Vulkan WSI and so we always get X
tiling which implies no CCS on gen9+. This patch doesn't actually fix
that bug yet but it takes us the first step in that direction by making
us actually pick the correct resolve op. In order to handle all of the
cases, we need more detailed aux tracking.
v2 (Jason Ekstrand):
- Make a few more things const
- Use the anv_fast_clear_support enum
v3 (Jason Ekstrand):
- Move an assert and add a better comment
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
If the function gets passed ANV_AUX_USAGE_DEFAULT, it still has the old
behavior of setting ISL_AUX_USAGE_NONE for depth/stencil which is what
we want for blits/copies.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
This replaces image_fast_clear and ccs_resolve with two new helpers that
simply perform an isl_aux_op whatever that may be on CCS or MCS. This
is a bit cleaner as it separates performing the aux operation from which
blorp helper we have to call to do it.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Right now, we have different entrypoints and enums in blorp for these
different operations. This provides us a central enum which we can
begin to transition to.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
v2: * Check whether the node src and dst registers are NULL before using
them.
* fix a type in the commit message.
Two cases are handled with this patch:
1. If copy propagation tries to eliminated a move from a relative
array access then it could optimize
MOV R1, ARRAY[RELADDR_1]
MOV R2, ARRAY[RELADDR_2]
OP2 R3, R1 R2
into
OP2 R3, ARRAY[RELADDR_1], ARRAY[RELADDR_2]
which is forbidden, because there is only one address register available.
2. When MULADD(x,a,MUL(x,c)) is handled
MUL TMP, R1, ARRAY[RELADDR_1]
MULLADD R3, R1, ARRAY[RELADDR_2], TMP
by folding this into
ADD TMP, ARRAY[RELADDR_2], ARRAY[RELADDR_1]
MUL R3, R1, TMP
which is also forbidden.
Test for these cases and reject the optimization if a forbidden combination
of relative access would be created.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103142
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
On r600 we use the scratch mem with read/read_ind, in that case
sb should track the rw_gpr as a dst instead of a src.
This stops the whole shader being optimised out.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Spills have to happen after the VLIW bundle currently
processed, so defer emitting the spill op.
Signed-off-by: Glenn Kennard <glenn.kennard@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This fixes:
KHR-GL45.texture_gather.swizzle
on cayman and redwood.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
NIR->LLVM should only be a translation pass, and all scan stuff
should be done before.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Add a build option to control building some of the misc tools we
have. Also set the executables to install, presumably you want
that if you're asking for the build.
v2: set 'install:' to the with_tools value, not true (Jordan)
handle 'all' in a the comma list (Dylan)
Add freedreno's tools (Dylan)
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
TGSI_INTERPOLATE_CONSTANT and TGSI_INTERPOLATE_LOC_CENTER have the
value zero so there's no change in behavior. It seems funny to
declare these fs input registers with constant interpolation. But
it looks like ureg_DECL_input_layout() is not called anywhere and
ureg_DECL_input() is only called from
util_make_geometry_passthrough_shader().
Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
And add a default switch case to silence a compiler warning.
Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
'indirect_params' was a bit vague. Use the names that we use in
gallium's pipe_draw_indirect_info.
Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
The initial revision of the patch adding loadable configs was testing
the feature's availability by adding a new config successfully and
then removing it.
A second version tested the availability just by exercising the
removal. But some unused code remained.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
This helps figuring out potential problems when metrics don't show up
on frameretrace for example.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
This ports the texture gather integer workaround from radeonsi.
This fixes:
KHR-GL45.texture_gather.plain-gather-uint/int*
v2: add rect support, fix 2d array shadow
Reviewed-by: Roland Scheidegger <sroland@vmware.com> (on irc)
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is taken from Glenn Kennards scratch series, but separated
out as a cleanup by me.
Reviewed-By: Gert Wollny <gw.fossdev@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The hw gives us coverage for pixel, not for individual fragment shader
invocations, in case execution isn't per pixel (eg, unlike cm, actually
cannot do "real" minSampleShading, it's either per-pixel or per-fragment,
but it doesn't really make a difference here).
Also, with msaa disabled, the hw still gives us a mask corresponding to
the number of samples, where GL requires this to be 1.
Fix this up by masking the sampleMaskIn bits with the bit corresponding to
the sampleID, if we know this shader is always executed at per-sample
granularity. (In case of a per-sample frequency shader and msaa disabled,
the sampleID will always be 0, so this works just fine there.)
Fixing this for the minSampleShading case will need a shader key (radeonsi
uses the prolog part for) (for eg, could get away with a single bit, cm
would need more bits depending on sample/invocation ratio, or read the
bits from a uniform), unless we'd want to always use a sample mask uniform
(which is probably not a good idea, as it would make the ordinary common
msaa case slower for no good reason).
This fixes some parts of piglit arb_sample_shading-samplemask (with fixed
test), in particular those which use a sampleID, still failing others
as expected.
Reviewed-by: Dave Airlie <airlied@redhat.com>
For some reason, we were iterating through the code twice (first just for
instructions needing barycentrics, then for instructions and input dcls).
Move things around slightly so this is no longer necessary.
There also was a unnedeed enabling of the fixed_pt_position_gpr - this is only
needed if the per-sample interpolation comes from an input, not from an
instruction (just move the assert where it belongs) (since the sample id to
sample from comes from a tgsi src in this case, and isn't sampleID).
Otherwise there should be no functional change.
Reviewed-by: Dave Airlie <airlied@redhat.com>
This parameter for _mesa_get_min_incations_per_fragment() was once used
by the intel driver, but it's long gone.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Dave Airlie <airlied@vmware.com>
Ported from the radeonsi GL_AMD_pinned_memory implementation.
Signed-off-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
It seems these were missed when struct pipe_context * argument was
added to hud_graph::query_new_value.
Fixes: 3132afdf4c "gallium/hud: pass pipe_context explicitly to most functions"
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Building gallium is faster by 7.5 seconds on a 4core/8thread 3GHz CPU.
(gallium build time is reduced by 15% when building only radeonsi)
Non-recursive makefiles are great!
The array members are have type 'struct gl_buffer_object *'
Found by coverity.
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
We need this to handle some oddball dx10 format
(DXGI_FORMAT_R10G10B10_XR_BIAS_A2_UNORM). What you can do with this
format is very limited, hence we don't want to add it as a gallium
format (we could not express the properties of this format as
ordinary format properties neither, so like all special formats
it would need specific code for handling it in any case).
While here, also nuke the array for different shaders for different
writemasks, as it was not actually used (always full masks are
passed in for generating shaders).
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
The writemask handling was busted, since writing defaults to output
meant they got overwritten by the tex sampling anyway. Albeit the
affected components were undefined, so maybe with some luck it
still would have worked with some drivers - if not could as well
kill it... (This would have affected u_blitter but not u_blit since
the latter always used xyzw mask.)
Reviewed-by: Brian Paul <brianp@vmware.com>
We don't need the library if we don't build tests, and building
it adds a dependency on gtest which adds a dependency on cxxabi.h.
Fixes: 6569b33b6e "mesa/st/tests: unify MockCodeLine* classes"
Reviewed-By: Gert Wollny <gw.fossdev@gmail.com>
v2: add disk_cache_has_key, disk_cache_put_key support
using blob cache (Nicolai, Jordan)
v3: rename set_cb as put_cb to match existing naming (Timothy)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This patch makes disk_cache initialize path and index lazily so
that we can utilize disk_cache without a path using callback
functionality introduced by next patch.
v2: unmap mmap and destroy queue only if index_mmap exists
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Next patch will allow disk_cache instance to be created without
path set for it, modify some test cases that assume disk_cache
creation to fail with invalid path. Creation should succeed but
simple put/get test fail.
v2: leave tests as is but check that both cache struct exists
and try simple put/get that should fail with invalid path set
(Emil)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> (v1)
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Ported from RadeonSI.
Only one F1 2017 shader is affected, code size decreased
from 532 to 488 on both Polaris10 and Vega10.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Although on gen8+ platforms we can in theory use 3DSTATE_VF_SGVS
to put these beyond the last vertex element it seems that we still
need to allocate the SVGS element, otherwise we have observed cases
where we end up reading garbage. Specifically, the CTS test mentioned
below was flaky with a fail rate of ~1% on some gen9+ platforms caused
by reading garbage for the gl_InstanceID value. The flakyness goes
away as soon as we start allocating the SVGS element.
v2:
- Do this for gen8+, not just gen9+, and pull the boolean
outside the #if block (Jason)
Fixes flaky test:
KHR-GL45.vertex_attrib_64bit.limits_test
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104335
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Using 'extern "C"' around includes is always incorrect, as the header may
contain C++ symbols (as it does in this case), which means it cannot use
C linkage. In this case the header has a template in it, which obviously
cannot be linked with C linkage rules.
Fixes: a29ad2b421 ("mesa/tests: Add tests for the generated dispatch table")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Instead just set the proper -I flags and include it from a more standard
path. In this case we'll add -Isrc/mesa (which is common), and #include
main/foo.h.
Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Since the type is gl_vertex_array. Update comment to explain that
these arrays are only used by the VBO module.
Also rename some local variables in _mesa_update_vao_derived_arrays().
Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Instead of testing for formats==NULL everywhere, just point formats at
a dummy array which will be discarded.
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Clang defines __GNUC__ macro, so one doesn't need to check __clang__
macro in this particular case.
v2: added comment as per Brian Paul's suggestion
Reviewed-by: Brian Paul <brianp@vmware.com>
Use a new helper function, st_access_flags_to_transfer_flags(), to
convert the GL_MAP_x flags to PIPE_TRANSFER_x flags.
We'll be able to use this function in a couple other places.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Split out some of the code into three new helper functions:
buffer_target_to_bind_flags(), storage_flags_to_buffer_flags(),
buffer_usage() to make the code more managable.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
LLVM can't shrink loads.
Polaris10:
Totals from affected shaders:
SGPRS: 62528 -> 59955 (-4.11 %)
VGPRS: 44708 -> 44616 (-0.21 %)
Spilled SGPRs: 16 -> 8 (-50.00 %)
Code Size: 1355504 -> 1355172 (-0.02 %) bytes
Max Waves: 11710 -> 11670 (-0.34 %)
Vega10:
Totals from affected shaders:
SGPRS: 51448 -> 50371 (-2.09 %)
VGPRS: 39140 -> 39048 (-0.24 %)
Spilled SGPRs: 16 -> 16 (0.00 %)
Code Size: 1307188 -> 1304296 (-0.22 %) bytes
Max Waves: 11312 -> 11292 (-0.18 %)
This reduces SGPRs spilling in MadMax, and it also reduces
number of SGPRs in DOW3 and F12017. The number of waves slightly
decreases in F1 but I don't see any performance changes after
benchmarking it. Talos and Serious Sam are not affected because
they don't use any push constants.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This is a very simple pass that just shrinks load_push_constant
intrinsics when some components are unused. For now, it can just
shrink vec4 to vec3, vec3 to vec2 and so on.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This fixes a regression for now, in the future we should gather
the used components properly.
V2: just set for VS and correctly handle doubles
Fixes: be973ed21f "radeonsi: load the right number of components for VS inputs and TBOs"
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
And use it in the enable code path.
Move _mesa_update_attribute_map_mode into its only remaining file.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
The mutex is currently used for reference counting and updating
the minmax index cache.
The change uses atomics directly for reference counting and
the mutex for the minmax cache.
This is safe since the reference count is not modified beside
in _mesa_reference_buffer_object where atomics aim to be used.
While using the minmax cache, the calling code holds a reference
to the buffer object. Thus unreferencing or even referencing the
buffer object does not need to be serialized with accessing
the minmax cache.
The change reduces the time _mesa_reference_buffer_object_ takes
by about a factor of two when looking at perf results for some
of my favorite use cases.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
If we have gaps in the shader mask we have to have 0x1 in them
according to a comment in radeonsi, and this is required to fix
the test at least on cayman.
We also need to record the highest one written to write to the
ps exports reg.
This fixes:
KHR-GL45.enhanced_layouts.fragment_data_location_api
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If we only get 1,2,3,6 framebuffers we want a sparse target mask.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Since enhanced layouts allows setting specific MRT outputs, we
can get sparse outputs, so we have to calculate the shader
mask earlier.
v1.1: update checks for state update (Roland)
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Set render cond and emit atom.
Fixes:
KHR-GL45.compute_shader.conditional-dispatching
Reviewed-by: Roland Scheidegger <sorland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We need to get the grid sizes earlier to fill in to the const
buffer.
Fixes:
KHR-GL45.compute_shader.built-in-variables
and
KHR-GL45.compute_shader.dispatch-indirect
Reviewed-by: Roland Scheidegger <sorland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This cleans up and fixes the previous fix even more.
Buffers from textures start at max const,
buffers from buffers/images come in from the 168 offset.
This fixes a bunch of:
KHR-GL45.shader_storage_buffer_object*
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
For buffers we want the size in bytes,
For images we want it in elements.
This fixes:
KHR-GL45.shader_storage_buffer_object.advanced-unsizedArrayLength-cs-std430-vec-pad
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
for frag shaders we get a value in the key, I expect I need
to make compute work better
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The compute emission path always emits this currently, and emitting
it on the fragment path breaks the blitter.
This fixes gpu hangs in KHR-GL45.compute_shader.resource-texture
Reviewed-by: Roland Scheidegger <sorland@vmware.com>
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This has 4 srcs.
This fixes:
KHR-GL45.shader_atomic_counter_ops_tests.ShaderAtomicCounterOpsExchangeTestCase
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
With sb enabled on cayman, this was overwriting the proper
cf index value with random ones if the dst gpr was 2 or 3,
only save the value for a MOVA instruction.
Fixes:
KHR-GL45.gpu_shader5.uniform_blocks_array_indexing
(on cayman with sb)
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes a few CTS cases in :
KHR-GL45.texture_view.view_sampling
some multisample cases are still broken, but not sure this is
the same problem.
v2: fix more cases
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
RX550 fails
dEQP-VK.renderpass.suballocation.multisample.d32_sfloat_s8_uint.samples_2
So increase the range of the workaround.
Fixes: f4c534ef6 (radv: don't enable tc compat for d32s8 + 4/8 samples (v1.1))
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fix INVALID_OPERATION caused by BufferData with target
EXTERNAL_VIRTUAL_MEMORY_BUFFER_AMD when the buffer size is
not page aligned.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Cc: 17.3 18.0 <mesa-stable@lists.freedesktop.org>
In file included from ../src/gallium/targets/dri/target.c:1:
In file included from ../src/gallium/auxiliary/target-helpers/drm_helper.h:8:
../src/util/xmlpool.h:103:10: fatal error: 'xmlpool/options.h' file not found
See also 26bde1e3.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
When using print_draw_arrays for debugging, we were printing an "n"
amount of vertex but that meant not to print all the size in the "n"
vertex, depending on the stride used.
Now we print the whole size in the "n" vertex.
Cc: Mathias Fröhlich <mathias.froehlich@web.de>
Cc: Brian Paul <brianp@vmware.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
The loop goes through the list of enabled extensions marking them as
enabled in the list, but this relies on every other extension being
initialized to false by default.
This bug would make us, for example, advertise certain device extension
entry points as available even when the corresponding extensions had
not been enabled.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Fixes: abc62282b5 "anv: Add a per-device table of enabled extensions"
Cc: "18.0" <mesa-stable@lists.freedesktop.org>
The SPIR-V parser splits in/out struct variables and creates
a separate variable for each first-level member of the struct.
When the struct variable has an initializer this means that we also
need to split the initializer.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Otherwise loop unrolling will fail to see the actual cost of
the unrolling operations when the loop body contains 64-bit integer
instructions, and very specially when the divmod64 lowering applies,
since its lowering is quite expensive.
Without this change, some in-development CTS tests for int64
get stuck forever trying to register allocate a shader with
over 50K SSA values. The large number of SSA values is the result
of NIR first unrolling multiple seemingly simple loops that involve
int64 instructions, only to then lower these instructions to produce
a massive pile of code (due to the divmod64 lowering in the unrolled
instructions).
With this change, loop unrolling will see the loops with the int64
code already lowered and will realize that it is too expensive to
unroll.
v2: Run nir_algebraic first so we can hopefully get rid of some of
the int64 instructions before we even attempt to lower them.
Reviewed-by: Matt Turner <mattst88@gmail.com>
CC r600_shader.lo
r600_shader.c: In function ‘egcm_int_to_double’:
r600_shader.c:4543:12: error: ‘ctx’ is a pointer; did you mean to use ‘->’?
if (ctx.bc->chip_class == CAYMAN)
^
->
Fixes: 35b4301577 ("r600/fp64: fix integer->double conversion")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Doing a straight uint/int->fp32->fp64 conversion causes
some precision issues, Roland suggested splitting the
integer into two portions and doing two separate
int->fp32->fp64 conversions then adding the results.
This passes the tests in CTS and piglit.
[airlied: fix cypress conversion opcodes]
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
set suitable defaults for 'dri-drivers', 'gallium-drivers', 'vulkan-drivers'
and 'platforms' options for osx, windows and cygwin, adding cygwin where
appropriate.
v2: error() for unknown OS
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Ken called this out in review, but it seems I forgot to make the change.
I noticed that the control flow annotations in the fragment shader
disassembly of tests/shaders/glsl-fs-loop-continue.shader_test were not
correct, and moving this line to the correct place fixes it.
According with OpenGL GLSL 3.20 spec, section 4.3.9:
"It is a link-time error if any particular shader interface
contains:
- two different blocks, each having no instance name, and each
having a member of the same name, or
- a variable outside a block, and a block with no instance name,
where the variable has the same name as a member in the block."
This fixes a previous commit 9b894c8 ("glsl/linker: link-error using the
same name in unnamed block and outside") that covered this case, but
did not take in account that precision qualifiers are ignored when
comparing blocks with no instance name.
With this commit, the original tests
KHR-GL*.shaders.uniform_block.common.name_matching keep fixed, and also
dEQP-GLES31.functional.shaders.linkage.uniform.block.differing_precision
regression is fixed, which was broken by previous commit.
v2: use helper varibles (Matteo Bruni)
Fixes: 9b894c8 ("glsl/linker: link-error using the same name in unnamed block and outside")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104668
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104777
CC: Mark Janes <mark.a.janes@intel.com>
CC: "18.0" <mesa-stable@lists.freedesktop.org>
Tested-by: Matteo Bruni <matteo.mystral@gmail.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
If extensions GL_KHR_texture_compression_astc_hdr or
GL_KHR_texture_compression_astc_sliced_3d are implemented then ASTC
format are supported in CompressedTex*Îmage3D.
Fixes KHR-GLES2.texture_3d.* with this format.
CC: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
build_id_find_nhdr_for_addr() fails to find the build-id if the first LOAD
segment has a virtual address other than 0x0.
For most shared libraries, the first LOAD segment has vaddr=0x0:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x000000 0x00000000 0x00000000 0x2d2e26 0x2d2e26 R E 0x1000
LOAD 0x2d2e54 0x002d3e54 0x002d3e54 0x2e248 0x2f148 RW 0x1000
However, compiling the Intel Vulkan driver as 32-bit binary on Android produces
the following ELF header with vaddr=0x8000 instead:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
PHDR 0x000034 0x00008034 0x00008034 0x00100 0x00100 R 0x4
LOAD 0x000000 0x00008000 0x00008000 0x224a04 0x224a04 R E 0x1000
LOAD 0x225710 0x0022e710 0x0022e710 0x25988 0x27364 RW 0x1000
build_id_find_nhdr_callback() compares the address of dli_fbase from dladdr()
and dlpi_addr from dl_iterate_phdr(). With vaddr > 0, these point to a
different memory address, e.g.:
dli_fbase=0xd8395000 (offset 0x8000)
dlpi_addr=0xd838d000
At least on glibc and bionic (Android) dli_fbase refers to the address where
the shared object is mapped into the process space, whereas dlpi_addr is just
the base address for the vaddrs declared in the ELF header.
To compare them correctly, we need to calculate the start of the mapping
by adding the vaddr of the first LOAD segment to the base address.
Note: musl users will need the following patch.
https://git.musl-libc.org/cgit/musl/commit/?id=b3ae7beabb9f0c219bb8a8b63567a01c6530c1ac
Cc: Chad Versace <chadversary@chromium.org>
Cc: <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104642
Fixes: 5c98d38 "util: Query build-id by symbol address, not library name"
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Logics that related to dual instances encode should only be done for
H264, not other codecs.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Add HEVC picture desc, and add codec check when creating and destroying
context.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Move all H264 encode related functions into separate file. Similar to
VAAPI decode side, there will be separate file for each codec on encode
side as well.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Implement encoding of sps, pps, vps, aud, and slice headers for HEVC
based on HEVC specs.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Pass pipe_picture_desc instead of pipe_h264_enc_picture_desc so that
it can be used for different codecs. Add functions to handle picture
parameters that will be used for HEVC encode.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Add vcn encode interface for HEVC, and rename radeon_enc_h264_enc_pic
to radeon_enc_pic since radeon_enc_pic is used by both H264 and HEVC.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Obviously it would be good to have an ADD and a MUL and a signal together,
but we can even potentially have multiple signals merged, as well.
total instructions in shared programs: 100423 -> 97874 (-2.54%)
instructions in affected programs: 78812 -> 76263 (-3.23%)
We emit some MOVs to track lifetimes of payload registers, but we don't
need there to be actual MOV instructions for them.
total instructions in shared programs: 101045 -> 100423 (-0.62%)
instructions in affected programs: 37083 -> 36461 (-1.68%)
If this is an image buffer, we need to calculate the correct resource
id.
Fixes:
KHR-GL45.shader_image_size.*
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes a crash in:
KHR-GL45.texture_cube_map_array.texture_size_compute_sh.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When the disk shader cache CI testing was enabled, we started noticing
occasional failures on deqp test runs. (Mainly SNB, rarely HSW)
Before this change, when we cleared the (in memory) program cache we
reused the same bo. Since the disk shader cache quickly restores
programs, it appears that this would lead to overwrites of the older
program binaries in the in memory program cache that apparently were
still executing in some cases. If these programs were still executing,
this could cause a GPU hang.
This issue is probably not disk shader cache specific, but may have
been hidden due to the compiler taking time to recompile programs
after the cache was cleared.
v2:
* Don't add `copy` param to brw_cache_new_bo (Ken)
* Call from brw_program_cache_check_size (Ken)
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This should increase performance by reducing SDRAM bank conflicts when
crossing between UIF columns (particularly on power-of-two height
textures).
The uif_xor_disable setup is dropped, since we need to allow XOR on lower
miplevels even when level 0 is XOR. The level 0 force UIF and level 0 XOR
flags should handle setting XOR properly on imported buffers.
The alignment here means that we can't get back the padded height from the
size/stride any more, so it's now a field in the slice as well.
Fixes piglit fbo-generatemipmap-formats RGBA16 NPOT.
The VC5 HW puts A in the low bits and R in the high bits. We can't just
swizzle in the shaders because the blending HW can't pick what channel A
is in, so make a new format to match it.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
swapBytes operates on bytes, not 4-bit channels, so you can't just take
non-swapBytes cases and flip the REV flag.
Avoids piglit texture-packed-formats regressions when enabling the
ABGR4444 format.
Fixes: c5a5c9a7db ("mesa/formats: add new mesa formats and their pack/unpack functions.")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Move generated files from codegen/meson.build to other directories, in order
to satisfy generated include file dependencies
Add correct file lists for architecture-specific libraries.
cc: mesa-stable@lists.freedesktop.org
cc: dylan@pnwbakers.com
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Currently we always check for 3.9.0, which is pretty safe since
everything except radv work with >= 3.9 and 3.9 is pretty old at this
point. However, radv actually requires 4.0, and there is a patch for
radeonsi to do the same.
Fixes: 673dda8330 ("meson: build "radv" vulkan driver for radeon hardware")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Currently there is not a separate option for setting the search path of
DRI drivers in meson, like there is in scons and autotools. This is an
oversight and needs to be fixed. This adds an extra option
`dri-search-path`, which will default to the value of
`dri-drivers-path`, like autotools does.
v2: - Split input list before joining.
v3: - use : instead of ; as the delimiter. The autotools help string
incorrectly says ; but the code uses :
v4: - Take list in pre : delimited form (Ilia)
- Ensure that the dri-search-path is absolute when using
dri_drivers_path
Fixes: db9788420d ("meson: Add support for configuring dri drivers directory.")
Reported-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net> (v2)
Reviewed-by: Eric Engestrom <eric@engestrom.ch> (v3)
On travis, for OSX, python2 from homebrew is pre-installed. per [1]:
python points to the macOS system Python (with no manual PATH modification)
python2 points to Homebrew’s Python 2.7.x (if installed)
python3 points to Homebrew’s Python 3.x (if installed)
pip doesn't exist
pip2 points to Homebrew’s Python 2.7.x’s pip (if installed)
pip3 points to Homebrew’s Python 3.x’s pip (if installed)
We will end up using 'python2' for building mesa.
Just use 'pip2' instead of 'pip', as that seems to work for all platforms on
travis.
[1] https://docs.brew.sh/Homebrew-and-Python.html
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Use a '|' YAML literal block to avoid the convoluted syntax needed to put
the entire conditional on a single line.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
An additional stub for applegl_create_context() is needed
Cannot test indirect API as it's not built on osx, currently
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
downsize_format_if_needed takes an integer as number of uploads
parameter. Hence, let's do an integer comparation instead of a boolean
check, since that is confusing.
Since we are at it, fix a couple of wrongly tabbed indents.
Cc: Alejandro Piñeiro <apinheiro@igalia.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
This only affects drivers that set DriverFlags.NewBlend.
v2: - fix typo advanded -> advanced
- return "enum gl_advanced_blend_mode" from
_mesa_get_advanced_blend_sh_constant
- don't call FLUSH_VERTICES twice
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The old one generates useless instructions in there, found while
comparing geometry shaders between RadeonSI and RADV.
This improves all Vulkan demos that use geometry shaders, +4%
for deferredshadows, +9% for viewportarray, +7% for
geometryshader on Polaris10.
This seems to also improve DOW3 a little bit (+1%).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
I think the cp packets can be made work, but I think it might
need a kernel change, so for now just do the worst thing.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
By the looks of it it seems hemlock is treated separately to cypress, but
certainly it won't need the stack workarounds cedar/redwood (and
seemingly every other eg chip except cypress/juniper) need.
(Discovered by accident.)
Acked-by: Alex Deucher <alexander.deucher@amd.com>
This passes the CTS and piglit tests.
This also disable sb for helper invocations until it doesn't
mess up the VPM flags.
Thanks to Ilia and Glenn for advice, and Roland for working
out the working evergreen path.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
deqp does not allow any KHX extensions, and since deqp is included
in android-cts, android does not allow any khx extensions.
So disable VK_KHX_multiview on android.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
CC: 18.0 <mesa-stable@lists.freedesktop.org>
Using the newly introduced VAO array maps, we can
simplify vbo_bind_vertex_list.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
Using the newly introduced VAO array maps, we can
simplify vbo_exec_bind_arrays.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
Using the newly introduced VAO state variable, we can
simplify recalculate_input_bindings.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
Instead of each context having its own map instance for
this purpose, use a global static const map.
v2: s,unsigned char,GLubyte,g
s,_VP_MODE_MAX,VP_MODE_MAX,g
Change comment style.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
Since the first material attribute no longer aliases with
the generic0 attribute, only aliasing between generic0 and
position is left and entirely dependent on the enabled
state of the VAO. So introduce a gl_attribute_map_mode
in the VAO that is used to track how the position
and the generic 0 attribute alias.
Provide a static const array that can be used to
map from vertex program input indices to VERT_ATTRIB_*
indices. The outer dimension of the array is meant to
be indexed directly by the new VAO member variable.
Also provide methods on the VAO to convert bitmasks of
VERT_BIT's from the VAO numbering to the vertex processing
inputs numbering.
v2: s,unsigned char,GLubyte,g
s,_ATTRIBUTE_MAP_MODE_MAX,ATTRIBUTE_MAP_MODE_MAX,g
Change comment style, add comments.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
The materials are now moved to the end of the
generic attributes block to the range 4-15.
Before, the way the position and generic 0 attribute
is handled was dependent on the presence and kind of
the currently attached vertex program. With this
change the way the position attribute and the generic 0
attribute is treated only depends on the enabled
flag of those two arrays.
This will later help to untangle the update dependencies
between enabled arrays and shader inputs.
v2: s,VERT_ATTRIB_MAT_OFFSET,VERT_ATTRIB_MAT0,g
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
Instead of just assuming that the material attributes
just overlap with the generic attributes 0-12, give
them symbolic defines so that we can easier move them
to an other range.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
When executing a display list draw, for the offset
list to be correct, the offset computation needs to
accumulate all attribute size values in order.
Specifically, if we are shuffling around the position
and generic0 attributes, we may violate the order or
if we do not walk the generic vbo attributes we may
skip some of the attributes.
Even if this is an unlikely usecase we can fix this use
case by precomputing the offsets on the full attribute list
and store the full offset list in the display list node.
v2: Formatting fix
v3: Rebase
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
Once a lp_build_sampler_soa or lp_build_sampler_aos object is created,
it should never be modified. Found by inspection.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
In vbo_draw_indirect_prims() pass the 'indirect_data' argument to
vbo->draw_prims(). All the callers are passing ctx->DrawIndirectBuffer
so this should be no functional change. Add a (temporary) assertion to
be sure.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
And rename indirect_params -> indirect_draw_count_buffer and
indirect_params_offset -> indirect_draw_count_offset to be more
specific.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
This parameter (from the glMultiDrawArraysIndirectCountARB function)
is poorly named. It's an offset into the buffer which contains the
number of primitives to draw.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Get rid of a bunch of goto spaghetti. Remove unneeded do_retry parameter.
No Piglit changes. Also tested w/ Google Earth and other apps.
Reviewed-by: Neha Bhende <bhenden@vmware.com>
The image_h for the tiling algorithm needs to be the padded-to-a-uifblock
height of the level, not the unpadded height or the height of level 0.
Fixes some cases of KHR-GLES3.texture_repeat_mode.* and
depthstencil-render-miplevels.
I thought I didn't need this because I was doing level-0-always-UIF and
that the pad there would propagate down, but it turns out that for level 1
the padding ends up being chosen by the HW. This brings us closer to
being able to turn on UIF XOR for increased performance, as well.
If we just make another gallium surface for the separate stencil, it's a
lot easier to keep track of which set of fields we're using in RCL setup.
This also incidentally fixes a little bug in setting up the surface's
padded height for separate stencil when the UIF-ness changes at different
levels of Z versus stencil.
This matches the naming of the other hub regs we get, and I don't know for
sure if UIFCFG will be the same register between the hub and the cores on
all versions.
Take into account the resource format, instead of applying a hardcoded
32bpp. This not only over-allocates 16bpp formats, but also results in
a wrong stride being filled into the handle.
Fixes: 848b49b288 ("gallium: add renderonly library")
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Daniel Stone <daniels@collabora.com>
In commit 3f353342a6 (present in 17.3.0)
we started unconditionally using I915_EXEC_NO_RELOC, which was
introduced in Linux v3.9. ChromeOS kernel 3.8 has backported this,
so it should work too.
Running on older kernels would likely result in every single batch
being rejected by the kernel, which is pretty catastrophic. Yet, it
appears that nobody noticed. So, let's just bump the official
requirement and move forward ever so slowly.
Fixes: 3f353342a6 ("i965: Use I915_EXEC_NO_RELOC")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Only dive into the windows subdir if windows platform is selected.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Fixes: 5ef75cb02b "meson: build src/glx/windows"
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
mesa/src/glx/glxcmds.c:1295:21: error: implicit declaration of function 'env_var_as_boolean' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
mesa/src/glx/apple/apple_visual.c:85:28: error: implicit declaration of function 'env_var_as_boolean' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Don't want an overly large numBufferBarriers/numTextureBarriers to blow
up the stack.
v2: handle malloc errors
v3: fix patch
v4: initialize texObjs/bufObjs
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
When the application doesn't provide its own pipeline cache,
the driver uses a in-memory cache but it shouldn't insert any
entries when the cache is explicitely disabled by the user.
Found while running my experimental pipeline-db tool with a
ton of shaders, the memory footprint was just huge, and sometimes
the process was even killed...
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The Vulkan spec says:
"pipelineBindPoint is a VkPipelineBindPoint indicating whether
the descriptors will be used by graphics pipelines or compute
pipelines. There is a separate set of bind points for each of
graphics and compute, so binding one does not disturb the other."
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104732
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
the vpm bit wasn't being applied to the push/pop instructions.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The vtx operations never got translated, so things worked by
0 being equal to 0, translate them so we can use the proper buffer
resinfo code.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
All of the current gallium nir driver use these optimisations but
they do so in their backends. Having these called in the backend
only can cause a number of problems:
- Shader compile times are greater because the opts need to do
significant passes over all shader variants.
- The shader cache is partially defeated due to the significant
optimisation passes over variants.
- We might miss out on nir linking optimisation opportunities.
Adding these passes to st_nir_opts() alleviates these problems.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
The emission of vertex attributes corresponding to dvec3 and dvec4
vertex shader input variables was not correct when the <size> passed
to the VertexAttribL* commands was <= 2.
In 61a8a55f55 ("i965/gen8: Fix vertex attrib upload for dvec3/4
shader inputs"), for gen8+ we needed to determine if the attrib was
dual slot to emit 128 or 256-bit, independently of the VAO size.
Similarly, for gen < 8 we also need to determine whether the attrib is
dual slot to force the emission of 256-bits through 2 uploads.
Additionally, we make use of the ISL_FORMAT_R32_FLOAT format in this
second upload to fill these unspecified components with zeros, as we
also do for gen8+.
Fixes the following test on Haswell:
KHR-GL46.vertex_attrib_binding.basic-inputL-case1
v2: Added more inline comments to explain why we are using
ISL_FORMAT_R32_FLOAT and its consequences, as requested by
Alejandro and Antía.
Fixes: 75968a668e ("i965/gen7: expose OpenGL 4.2 on Haswell when
supported")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103006
Cc: Alejandro Piñeiro <apinheiro@igalia.com>
Cc: Juan A. Suarez Romero <jasuarez@igalia.com>
Cc: Antia Puentes <apuentes@igalia.com>
Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Antia Puentes <apuentes@igalia.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This requires moving the _MaxLevel handling up to the callers. Another
user of intel_finalize_mipmap_tree will be added later that depends on
_MaxLevel not being modified.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
brw_bo_wait_rendering used to take a brw_context pointer for perf_debug
messages about stalls. Chris eliminated that in 833108ac14.
This message about passing NULL to avoid those warnings is no longer
relevant, and just adds confusion. So, drop it.
This reverts commit 513c2263cb.
_mesa_base_fbo_format_ is used to validate the internalformat
passed to RenderbufferStorage, which in the OpenGL 4.6 is said:
"An INVALID_ENUM error is generated if internalformat is not one of the
color-renderable, depth-renderable, or stencil-renderable formats defined
in section 9.4."
RGB9_E5 format is not renderable, as stated in the same specification
(Bug 9338).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104794
Cc: Juan A. Suarez Romero <jasuarez@igalia.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
This can lead to a situation where cache flushes could get conditionally
disabled while still clearing the flush_bits, and thus flushes due to
application pipeline barriers may never get executed.
Fixes: a6c2001ace (radv: add support for cmd predication.)
Signed-off-by: Dave Airlie <airlied@redhat.com>
This reverts part of the patch which introduced the GLenum16 change.
Fixes a conform regression found by Roland.
Fixes: f96a69f916 ("mesa: replace GLenum with GLenum16 in
common structures (v4)")
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
If we ever hit this edge-case, it can theoretically cause problem for
CNL because we could end up changing render targets without re-emitting
3DSTATE_MULTISAMPLE which is part of the pipeline. Just get rid of the
edge case.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
min(a+b, c+d) >= 0 becomes (a+b >= 0 && c+d >= 0).
No shader-db changes, but it does prevent 6 to 12 instruction
regressions in the next patch on all measured Intel platforms.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Elie Tournier <elie.tournier@collabora.com>
v2: Rebase on almost 2 years. Require that one of the arguments to fmin
or fmax be used only once. This prevents some regressions.
shader-db results:
Skylake and Broadwell had similar results. Skylake shown.
total instructions in shared programs: 14526021 -> 14525913 (<.01%)
instructions in affected programs: 4613 -> 4505 (-2.34%)
helped: 31
HURT: 0
helped stats (abs) min: 1 max: 4 x̄: 3.48 x̃: 4
helped stats (rel) min: 0.62% max: 6.67% x̄: 3.31% x̃: 2.42%
total cycles in shared programs: 533118710 -> 533118403 (<.01%)
cycles in affected programs: 34334 -> 34027 (-0.89%)
helped: 24
HURT: 0
helped stats (abs) min: 4 max: 24 x̄: 12.79 x̃: 14
helped stats (rel) min: 0.25% max: 2.40% x̄: 1.08% x̃: 1.03%
No changes on GM45, Iron Lake, Sandy Bridge, Ivy Bridge, or Haswell.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Elie Tournier <elie.tournier@collabora.com>
We need this to be able to support the interpolateAt builtins in a
sane way. It also leads to the generation of more optimal code.
The lowering and splitting is made conditional on lower_all_io_to_temps
because vc4 and freedreno both expect these passes to be enabled and
niether support glsl 400 so don't need to deal with the interpolateAt
builtins.
We leave the other stages for now as to avoid regressions. Ideally we
could remove the stage checks and just set the nir options correctly
for each stage. However all gallium drivers currently just use return
the same nir compiler options for all stages, and it's probably more
trouble than its worth to change this.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We need this because we will always copy fs outputs to temps and
split the arrays, but do not want to do either of these with fs
inputs as it is unnessisary and makes handling interpolateAt
builtins difficult.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We need this to be able to support the interpolateAt builtins in a
sane way. It also leads to the generation of more optimal code.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We need to collect this when scanning over the instruction rather
than when scanning over the inputs otherwise we might get confliting
values for inputs that are use by the interpolateAt* builtins.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Also moved everything in a struct and then return the struct from
the helper function, so it is clear in the caller what part of the
pipeline gets modified.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This gives about 2% performance improvement on dota2 for me.
This is mostly a mechanical copy and replacement, but at bind time
we still do:
1) Some stuff that is only based on num_samples changes.
2) Some command buffer state setting.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This fixes the piglit test:
spec/ext_semaphore/api-errors/usigned-byte-i-v-bad-value
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This allows the client to actually query the enums specified in the
ext_external_objects spec.
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This fixes the following piglit tests:
spec/ext_semaphore_fd/api-errors/import-semaphore-fd-bad-enum
spec/ext_memory_object_fd/api-errors/import-memory-fd-bad-enum
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
When calling si_fence_server_sync(), the wait operation is associated
with the next kernel submission. Therefore, any unflushed work
submitted previous to fence_server_sync() will also be affected by
the wait.
To avoid adding the dependency to the unflushed work, we flush before
emitting the fence dependency.
v2: s/semaphore/fence
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Syncobj based waits or signals only happen at submission boundaries. In
order to guarantee that the requested signal event will occur when the
state tracker requested it, we must issue a flush.
v2: s/fence/semaphore for pipe objects
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Hook up importing semaphores of type PIPE_FD_TYPE_SYNCOBJ
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Add the ability to signal a syncobj when a cs completes execution.
v2: corresponding changes for gallium fence->semaphore rename
v3: s/semaphore/fence for pipe objects
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Bits to implement ServerWaitSemaphoreObject/ServerSignalSemaphoreObject
v2:
- corresponding changes for gallium fence->semaphore rename
- flushing moved to mesa/main
v3: s/semaphore/fence for pipe objects
v4: add bitmap flushing
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Memory synchronization is left for a future patch.
v2: flush vertices/bitmaps moved to mesa/main
v3: removed spaces before/after braces
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
EXT_semaphore and EXT_semaphore_fd define no pnames. Therefore there
isn't much to do besides determining the correct error code.
v2: removed useless return
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Used by EXT_semmaphore and EXT_semaphore_fd
v2: Removed unnecessary dummy callback initialization
v3: Fixed attempting to free the DummySemaphoreObject
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Guarded by PIPE_CAP_SEMAPHORE_SIGNAL
v2: corresponding changes for PIPE_CAP_SEMAPHORE_SIGNAL rename
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Calling this function will emit a fence signal operation into the
GPU's command stream.
v2: documentation typos
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Denotes that a fd is backed by a synobj. For example, radv shared
semaphores.
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
An fd can potentially have different types of objects backing it.
Specifying the type helps us make sure we treat the FD correctly.
This is in preparation to allow importing syncobj fence FDs in addition
to native sync FDs.
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This function can get access for a 64-bit dvec4, which means we
have to load 8 components.
This fixes:
R600_DEBUG=nir ./bin/shader_runner generated_tests/spec/arb_gpu_shader_fp64/execution/built-in-functions/fs-abs-dvec4.shader_test -auto
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Some of the enable/disable vertex array functions take a zero-based
generic index, while others take a VERT_ATTRIB_GENERIC0-based value.
Add an assertion to clarify that in one place.
Reviewed-by: Gert Wollny <gw.fossdev@gmail.com>
In creating fixed function vertex shader hash keys do only
care for producing the varying output if fog is enabled and the
varing is consumed in the fragment stage.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
Using lower alignment restrictions for the state key fields finally
yields to a smaller hashing state key.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
Remove set but not read field from the state key used for hashing
fixed function vertex shaders.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
Remove set but not read field from the state key used for hashing
fixed function vertex shaders.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
For the state key for hashing fixed function vertex shaders, the
texgen_enabled field requires only a single bit.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
For the state key for hashing fixed function
vertex shaders, encode the different fog modes, including
if fog is generally enabled or not, into a 2 bit field.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
For the state key for hashing fixed function
vertex shaders, the information is only evaluated
if lighting is generally switched on.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
For the state key for hashing fixed function
vertex shaders, The varying_vp_inputs bitmask already
contains the point size array enabled information.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
If a shader only writes to an output via a constant initializer we
need to lower it before we call nir_remove_dead_variables so that
this pass sees the stores from the initializer and doesn't kill the
output.
Fixes test failures in new work-in-progress CTS tests:
dEQP-VK.spirv_assembly.instruction.graphics.variable_init.output_vert
dEQP-VK.spirv_assembly.instruction.graphics.variable_init.output_frag
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
texture_format_error_check_gles() displays error like "glTexImage%dD".
This patch just replace the %d by the correct dimension.
Signed-off-by: Elie Tournier <elie.tournier@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Inspired by Marek's earlier patch, but even smaller. Sort fields from
largest to smallest. Use bitfields for more fields (sometimes with an
extra bit for MSVC). Reduce Stride field to GLshort.
Note that some fields cannot be bitfields because they're accessed via
pointers (such as for glEnableClientState(GL_VERTEX_ARRAY) to set the
Enabled field).
Reduces size from 48 to 24 bytes.
Also reduces size of gl_vertex_array_object from 3632 to 2864 bytes.
And add some assertions in init_array().
v2: use s/GLuint/unsigned/, improve commit comments.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Inspired by Marek's earlier patch, but goes a little further.
Sort fields from largest to smallest. Use bitfields.
Reduced from 48 bytes to 32. Also reduces size of gl_vertex_array_object
from 4144 to 3632
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
v2: - fix glGet*
- also use GLenum16 for DrawBuffers
v3: - rebase to top of tree (BrianP) and incorporate Ian's suggestions
v4: - fix a GLenum16 bug in VBO/save code, add some STATIC_ASSERT()s
gl_context = 152432 -> 136840 bytes
vbo_context = 22096 -> 20608 bytes
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
get_value_size() returns -1 for an error. The similar check in
_mesa_GetUnsignedBytei_vEXT() is correct.
Found by chance. There are apparently no Piglit tests which exercise
glGetUnsignedBytei_vEXT() or glGetUnsignedBytevEXT().
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Sometimes rasterization state object could be empty. This is causing
segfault on hw8,9,10 for some traces.
This patch fixes enemy_territory_quake_wars_high,
enemy_territory_quake_wars_low, etqw-demo, lightsmark2008, quake1
glretrace crashes on hw 8,9,10.
Tested with mtt-glretrace and mtt-piglit.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
According to spec, S3TC_DXT1_EXT RGB formats are supposed to be
opaque. Correspoding svga formats are not handling it so explicitly
setting it to 1.0.
This fixes piglit test spec@ext_texture_compression_s3tc@s3tc-targeted
Note: This test is testcase for freedesktop bug 100925
Tested with mtt-piglit and mtt-glretrace on 8,9,10,11 and 15
Reviewed-by: Brian Paul <brianp@vmware.com>
In the register lifetime estimation if the first write is unconditional or
conditional but not within a loop then this is an unconditional dominant
write in the sense of register life time estimation.
Add a test case and record the write accordingly.
Fixes: 807e2539e5 ("mesa/st/glsl_to_tgsi: Add
tracking of ifelse writes in register merging")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104803
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
The size/type query is always legal (if we made it that far).
Removing this causes a difference for GL_TEXTURE_BUFFER - the reason is that
these parameters are valid only with GetTexLevelParameter() if gl 3.1 is
supported, but not if only ARB_texture_buffer_object is supported.
However, while the spec says that these queries return "the same information
as querying GetTexLevelParameter" I believe we're not expected to return just
zeros here. By definition, these pnames are always valid (unlike for the
GetTexLevelParameter() function which would return an error without GL 3.1).
The spec is a bit inconsistent there and open to interpretation - while
mentioning the "same information as querying GetTexLevelParameter" is
returned, it also mentions that 0 is returned for size/type if the
target/format is not supported - implying correct results to be returned
if it is supported, regardless that GetTexLevelParameter would return
an error. (Also, the bit about this returning the same as
GetTexLevelParameter also includes querying stencil type, which isn't
even possible with GetTexLevelParameter.)
This breaks some piglit arb_internalformat_query2 tests (which I believe to
be wrong).
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>§
The code just considered all formats as being supported if they were either
a valid fbo or texture format.
This was quite awkward since then the query would return "supported" for
e.g. GL_RGB9E5 or compressed formats and target RENDERBUFFER (albeit the driver
could still refuse it in theory). However, when then querying for instance the
internalformat sizes, it would just return 0 (due to the checks being more
strict there).
It was also a problem for texture buffer targets, which have a more restricted
list of formats which are allowed (and again, it would return supported but
then querying sizes would return 0).
So only take validation of formats into account which make sense for a given
target.
Can also toss out some special checks for rgb9e5 later, since we'd never get
there if it wasn't supported in the first place.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Testing for gles there is just confusing - this is about target being
supported, if it was valid at all was already determined earlier
(in _legal_parameters). It didn't make sense at all in any case, since
it would only have said false there for gles for 2d but not 2d arrays etc.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
This fixes an assert in nir_lower_var_copies() for some bioshock
shaders where an unused clipdistance array has no size.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
c2acf97fcc changed the use of double_inputs_read to be
inconsitent with its previous meaning. Here we re-enable the
gather info code that was removed as the modified code from
c2acf97fcc now uses the double_inputs member rather than
double_inputs_read.
This change allows us to use double_inputs_read with gallium
drivers without impacting double_inputs which is used by i965.
We also make use of the compiler option vs_inputs_dual_locations
to allow for the difference in behaviour between drivers that handle
vs inputs as taking up two locations for doubles, versus those that
treat them as taking a single location.
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Allows nir drivers to either use a single or dual locations for
vs double inputs.
i965 uses dual locations for both OpenGL and Vulkan drivers, for
now gallium OpenGL drivers only use a single location.
The following patch will also make use of this option when
calling nir_shader_gather_info().
Reviewed-by: Karol Herbst <kherbst@redhat.com>
First we move double_inputs_read into a vs struct in the union,
double_inputs_read is only used for vs inputs so this will
save space and also allows us to add a new double_inputs field.
We add the new field because c2acf97fcc changed the behaviour
of double_inputs_read, and while it's no longer used to track
actual reads in i965 we do still want to track this for gallium
drivers.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This ports a fix from amdvlk, to fix the sizing for mip levels
when block compressed images are viewed using uncompressed views.
My original fix didn't power the clamping, but it looks like
the clamping is required to stop the sizing going too large.
Fixes:
dEQP-VK.image.texel_view_compatible.graphic.extended*bc*
Doesn't crash DOW3 anymore.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Fixes: e38685cc62 'Revert "radv: disable support for VEGA for now."'
Signed-off-by: Dave Airlie <airlied@redhat.com>
It did not signal syncobjs in the fence, and also signalled too early
if there was work on the queue already, as we have to wait till that
work is done.
Fixes: d27aaae4d2 "radv: Add external fence support."
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
The arrays specified by ctx->Array._DrawArrays are used for all
vertex drawing via vbo_context::draw_prims(). Different arrays are
used for immediate mode, vertex arrays, display lists, etc. Changing
from one to another requires updating derived/driver array state.
Before, we indirectly specifid the arrays with the gl_draw_method values.
Now we just directly specify the arrays instead. This is simpler and
will allow a subsequent display list optimization.
In the future, it might make sense to get rid of ctx->Array._DrawArrays
entirely and just pass the arrays as another parameter to
vbo_context::draw_prims().
Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
To match the VERT_ATTRIB_COLOR_INDEX name.
Give a name to the previously anonymous enum of VBO_ATTRIB_x values.
Update the comment on the enum.
Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Instead of NONE/ARB use FF/SHADER. Move the enum declaration to
vbo_private.h where it's used.
Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
This change cleans following scary warnings in valgrind output
when disk cache is being written:
==6532== Uninitialised byte(s) found during client check request
==6532== at 0x14423FAD: blob_write_bytes (blob.c:152)
==6532== by 0x144240FB: blob_write_uint32 (blob.c:194)
==6532== by 0x144001A5: write_tex (nir_serialize.c:613)
and later (loads of):
==6532== Use of uninitialised value of size 8
==6532== at 0x62FCD9E: crc32_z (in /usr/lib64/libz.so.1.2.11)
==6532== by 0x13F65014: util_hash_crc32 (crc32.c:127)
==6532== by 0x13F5DABA: cache_put (disk_cache.c:947)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
==2780== 1,024 bytes in 1 blocks are possibly lost in loss record 180 of 205
==2780== at 0x4C31A1E: calloc (vg_replace_malloc.c:711)
==2780== by 0x13F6467E: util_queue_init (u_queue.c:309)
==2780== by 0x13F5C9F6: disk_cache_create (disk_cache.c:369)
==2780== by 0x13F05406: brw_disk_cache_init (brw_disk_cache.c:428)
==2780== by 0x13F01E78: brwCreateContext (brw_context.c:1068)
Fixes: 1a61a8b9a7 ("i965: Initialize disk shader cache if MESA_GLSL_CACHE_DISABLE is false")
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
==25481== 576 bytes in 1 blocks are definitely lost in loss record 179 of 208
==25481== at 0x4C2FB6B: malloc (vg_replace_malloc.c:299)
==25481== by 0x1404E2CC: ralloc_size (ralloc.c:121)
==25481== by 0x14119F82: read_and_upload (brw_disk_cache.c:176)
==25481== by 0x1411A5C9: brw_disk_cache_upload_program (brw_disk_cache.c:271)
==25481== by 0x1412FCA4: brw_upload_wm_prog (brw_wm.c:597)
Fixes: 516d50db31 ("i965: add initial implementation of on disk shader cache")
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This fixes the scenario where the input is a struct. With this
the Unreal engines Elemental demo now works on radeonsi.
Reviewed-by: Dave Airlie <airlied@redhat.com>
This uses a different shader than radeonsi, as we can't address non-256
aligned ssbos, which the radeonsi code does. This passes some extra
offsets into the shader.
It also contains a set of u64 instruction implementation that may
or may not be complete (at least the u64div is definitely not something
that works outside this use-case). If r600 grows 64-bit integers,
it will use the GLSL lowering for divmod.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If the images/buffer bindings had a gap, this produced the wrong values,
this should fix that to generate the correct rat mask for mixes of
images/buffers/cbs.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Cc: "18.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Otherwise, using pkg-config to retrieve flags will fail, e.g.
$ pkg-config gl --cflags
Package libdrm was not found in the pkg-config search path.
Perhaps you should add the directory containing `libdrm.pc'
to the PKG_CONFIG_PATH environment variable
Package 'libdrm', required by 'gl', not found
Fixes: 3218056e0e ("meson: Build i965 and dri stack")
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
The changes in 4.2 haven't impacted any of our CL or state struct entries
that I can see, so I haven't enabled custom compile for doing 4.2 instead
of 4.1.
shader-db doesn't show any regression and 32-bit pointers with byval
are declared as VGPRs for some reason.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Without this we will fail to correctly serialise programs when
using glGetProgramBinary() if the program was retrieved from
the disk cache rather than freshly compiled.
Fixes: c69b0dd681 "st/glsl_to_tgsi: store num_tgsi_tokens in st_*_program"
Reviewed-by: Gert Wollny <gw.fossdev@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104762
I got reviews and fixed the patches locally, but ended up merging the
ones that I sent originally to the list. This patch fixes those
mistakes.
Fixes: 78c125af39
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
These packets were causing GPU hangs when the context was restored,
possibly because they were pointing to BO's that were already
unreferenced. So we tell the hardware to ignore such packets after the
batch buffer ends, since we know those BO's are not around anymore.
This change fixes GPU hangs on CNL. The (partial) solution to this
problem so far was to entirely disable push constants on this platform.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: "18.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The warning happens on line 2114 for the memcpy(data, p, size) call.
I'm not sure why that generates the warning but not the earlier use
of p in the code.
Reviewed-by: Neha Bhende <bhenden@vmware.com>
We assigned the function that gets the device uuid to the GetDriverUuid
function pointer and the function that gets the driver uuid to the
GetDeviceUuid function pointer inside the state tracker. Exchanged the
pointers.
cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Brian Paul <brianp@vmware.com>
We need to access the pipeline layout to compute correct dynamic
offsets for dyamic UBO/SSBO descriptors when we emit draw commands.
Instead of taking it from the pipeline object, store the layout
in the command buffer pipeline state.
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The Vulkan spec states that VkPipelineLayout objects must not be
destroyed while any command buffer that uses them is in the recording
state, but it permits them to be destroyed otherwise. This means that
applications are allowed to free pipeline layouts after command recording
is finished even if there are pipeline objects that still exist and were
created with these layouts.
There are two solutions to this, one is to use reference counting on
pipeline layout objects. The other is to avoid holding references to
pipeline layouts where they are not really needed.
This patch takes a step towards the second option by making the
pipeline shader compile code take pipeline layout from the
VkGraphicsPipelineCreateInfo provided rather than the pipeline
object.
A follow-up patch will remove any remaining uses of the layout field
so we can remove it from the pipeline object and avoid the need
for reference counting.
v2: Use ANV_FROM_HANDLE, remove unnecessary braces (Jason)
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The spec states that descriptor set layouts can be destroyed almost
at any time:
"VkDescriptorSetLayout objects may be accessed by commands that
operate on descriptor sets allocated using that layout, and those
descriptor sets must not be updated with vkUpdateDescriptorSets
after the descriptor set layout has been destroyed. Otherwise,
descriptor set layouts can be destroyed any time they are not in
use by an API command."
v2: allocate off the device allocator with DEVICE scope (Jason)
Fixes the following work-in-progress CTS tests:
dEQP-VK.api.descriptor_set.descriptor_set_layout_lifetime.graphics
dEQP-VK.api.descriptor_set.descriptor_set_layout_lifetime.compute
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This attribute is similar to the definition of restrict in
C99 and it might help LLVM.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This allows to reduce the number of dwords that are loaded
with buffer_load_format_xyzw. For example, when the only used
channel is 1, the driver will emit buffer_load_format_x instead.
Shader stats for DOW3 (with some local hacky scripts for SPIRV):
143 shaders in 143 tests
Totals:
SGPRS: 5344 -> 5352 (0.15 %)
VGPRS: 3476 -> 3452 (-0.69 %)
Spilled SGPRs: 30 -> 29 (-3.33 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Private memory VGPRs: 0 -> 0 (0.00 %)
Scratch size: 0 -> 0 (0.00 %) dwords per thread
Code Size: 269860 -> 269808 (-0.02 %) bytes
LDS: 0 -> 0 (0.00 %) blocks
Max Waves: 1267 -> 1272 (0.39 %)
Wait states: 0 -> 0 (0.00 %)
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
The GPU hangs when the driver forces a PS_PARTIAL_FLUSH after
a dispatch call (and vice versa for graphics). Something has
changed in the kernel driver because it used to work.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
According to LLVM, only pre-GFX9 targets do not flush denorms
for fmin/fmax.
All dEQP-VK.glsl.builtin.precision.* still pass.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Without this, we may end up dereferencing blend before we check for
binding->index != UINT32_MAX. However, Vulkan allows the blend state to
be NULL so long as you don't have any color attachments. This fixes a
segfault when running The Talos Principal.
Fixes: 12f4e00b69
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
The values that this function returned were always the values passed
in. The only thing that happened was either an assertion or undefined
results when an unknown value was passed in. This doesn't seem that
useful. Most of nouveau_gldefs.h could be removed in this manner.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
And rename to emit_copy_blit.
v2: sed --in-place -e 's/color_logic_ops/gl_logicop_mode/g' $(grep -lr
color_logic_ops src/) suggested by Brian.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> [v1]
And rename to emit_copy_blit.
v2: sed --in-place -e 's/color_logic_ops/gl_logicop_mode/g' $(grep -lr
color_logic_ops src/) suggested by Brian.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> [v1]
And delete the resulting dead code. This has only been compile-tested.
v2: sed --in-place -e 's/color_logic_ops/gl_logicop_mode/g' $(grep -lr
color_logic_ops src/) suggested by Brian.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
With the exception of NVIDIA hardware, these are is the values that all
hardware and Gallium want. The remapping is currently implemented in at
least 6 places. This starts the process of consolidating to a single
place.
v2: sed --in-place -e 's/color_logic_ops/gl_logicop_mode/g' $(grep -lr
color_logic_ops src/) suggested by Brian. Added some comments about the
selection of bit patterns for gl_logicop_mode and the GLenums.
Suggested by Nicolai. Folded the GLenum_to_color_logicop macro into its
only users.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com> [v1]
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
-1 is considered an error for EGL_ANDROID_native_fence_sync, so
we need to actually create a sync file.
Fixes: f536f45250 "radeonsi: implement sync_file import/export"
Reviewed-by: Dave Airlie <airlied@redhat.com>
18fde36ced changed the way temporary
registers were allocated in lower_integer_multiplication so that we
allocate regs_written(inst) space and keep the stride of the original
destination register. This was to ensure that any MUL which originally
followed the CHV/BXT integer multiply regioning restrictions would
continue to follow those restrictions even after lowering. This works
fine except that I forgot to reset the register file to VGRF so, even
though they were assigned a number from alloc.allocate(), they had the
wrong register file. This caused some GLES 3.0 CTS tests to start
failing on Sandy Bridge due to attempted reads from the MRF:
ES3-CTS.functional.shaders.precision.int.highp_mul_fragment.snbm64
ES3-CTS.functional.shaders.precision.int.mediump_mul_fragment.snbm64
ES3-CTS.functional.shaders.precision.int.lowp_mul_fragment.snbm64
ES3-CTS.functional.shaders.precision.uint.highp_mul_fragment.snbm64
ES3-CTS.functional.shaders.precision.uint.mediump_mul_fragment.snbm64
ES3-CTS.functional.shaders.precision.uint.lowp_mul_fragment.snbm64
This commit remedies this problem by, instead of copying inst->dst and
overwriting nr, just make a new register and set the region to match
inst->dst.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103626
Fixes: 18fde36ced
Cc: "17.3" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This seems to be broken, at least the cts tests fail.
This fixes:
dEQP-VK.renderpass.suballocation.multisample.d32_sfloat_s8_uint.samples_4
dEQP-VK.renderpass.suballocation.multisample.d32_sfloat_s8_uint.samples_8
2 samples seems to pass fine, amdvlk doesn't appear to enable TC for
possibly some other reasons here.
This is most likely a hack.
v1.1: add a bit of explaination text. (Samuel)
Fixes: ad3d98da9 (radv: enable tc compatible htile for d32s8 also.)
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Modify DumpToFile to only dump the function, not the entire module.
Reduces file sizes and speeds up the dumping.
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Hides console window creation during JIT linker execution in apps that
don't have a console. Remove hooking of CreateProcessInternalA - the
MSFT implementation just turns around and calls CreateProcessInternalW
which, we do hook.
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Early Rasterization did not initially work with USE_SIMD16_FRONTEND=0.
Fix it so it works there, too. Please note that the default setting
is USE_SIMD16_FRONTEND=1.
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
We actually use some of the types from mtypes.h so include it directly
instead of relying on indirectly including it via bufferobj.h
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
All but two cases of the switch did the same n += InstSize[n[0].opcode]
instruction. Just move it after the switch.
Add some sanity check assertions.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
The newest version of WSI Fusion makes several glDrawPixels calls
per frame. By caching more than one image, we get better performance
when panning/zooming the map.
v2: move pixel unpack param checking out of cache search loop, per Roland
v3: also move unpack->BufferObj check out of loop, per Roland.
Noticed while skimming for GLX_ instances in the dri codebase.
Comment is completely off and was in such a state since day 1.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Remove the instances already available in gl.h or glext.h.
Sadly GLclampx is only available in GLES(1) so we need to keep that one.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Fixes: a7cfec3be0 ("vbo: move VBO-private types, prototypes, etc. into
new vbo_private.h header")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Namely extend the EXTRA_DIST list, instead of re-assigning it and bring
back a file dropped by mistake.
Fixes: 436ed65d38 ("autotools: include meson build files in tarball")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
We are not allowed to modify the incoming coords values, or things may
crash (as we may be inside a llvm conditional and the values may be used
in another branch).
I recently broke this when fixing an issue with NaNs and seamless cube
map filtering, and it causes crashes when doing cubemap filtering
if the min and mag filters are different.
Add const to the pointers passed in to prevent this mishap in the future.
Fixes: a485ad0bcd ("gallivm: fix an issue with NaNs with seamless cube filtering")
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Previously, we were handling self-dependencies by marking the render
buffer and then passing disable_aux=true to prepare_texture so that it
would do a resolve. This works but ends us up doing to much resolving
in some cases. Specifically, if we're doing something such as mipmap
generation, this would cause us to resolve all levels of the texture if
even one of them is overlapping.
Instead, this commit makes us wait until we process the framebuffer to
do these resolves and we only resolve the slices needed for rendering.
Doing this resolve puts them into the pass-through state so, even if we
do texture using CCS_E, the CCS data will effectively be ignored and the
real surface contents read.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Instead of keeping an array of booleans, we now hang onto an array of
isl_aux_usage enums. This means that the thing we are passing from
brw_draw.c to surface state setup is the thing that surface state setup
actually needs instead of an input to compute what it needs.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The only purpose of this function is to disable aux on texture surfaces
when the corresponding renderbuffer has aux disabled. However, the act
of disabling aux on the renderbuffer will cause it to be resolved and
intel_miptree_texture_aux_usage will already check the resolved status
of a texture and return ISL_AUX_USAGE_NONE for it. Even if we used CCS
for it, that wouldn't really be a problem because the CCS will be in the
pass-through state and so it would effectively be ignored.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Only one of the callers of intel_miptree_render_aux_usage actually took
brw->draw_aux_buffer_disabled into account. This was causing us to
ignore draw_aux_buffer_disabled for the intel_miptree_prepare_render.
This isn't a problem because the draw_aux_buffer_disabled entry was set
during texture preparation and we already did the resolve at that time.
However, this also meant that the aux_usage we were passing to
brw_cache_flush_for_render and brw_render_cache_add_bo was wrong so our
automatic cache flushing around aux_usage changes wasn't happening.
This was causing GPU hangs in Oxenfree.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104711
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104411
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104383
Fixes: ea0d2e98ec
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Both callers of intel_miptree_prepare/finish_render have to call
intel_miptree_render_aux_usage anyway for other reasons. They may as
well pass the result in instead of us calling it again.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
As far as I can tell this always just reassigns the same value.
Also as we don't curretly store UniformHash in the shader cache
removing this will help with adding a shader cache to gallium
nir drivers.
Reviewed-by: Rob Clark <robdclark@gmail.com>
When LLVM is built inside of a git repo (even way below, e.g. /usr/ports/.git
exists, and LLVM is built in /usr/ports/devel/llvm50/work), its version
becomes something like 5.0.0git-f8ab206b2176.
New meson versions already handle this, but we support older versions too.
Fixes: 673dda8330 ("meson: build "radv" vulkan driver for radeon hardware")
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
get_pkgconfig_variable('cflags') always returns an empty list, it's a
function for getting *custom* variables.
Meson does not yet support asking for cflags, so explicitly invoke
pkg-config for now.
Fixes: 68076b8747 ("meson: build gallium vdpau state tracker")
Fixes: a817af8a89eb ("meson: build gallium xvmc state tracker")
Fixes: 1d36dc674d ("meson: build gallium omx state tracker")
Fixes: 5a785d51a6 ("meson: build gallium va state tracker")
Reviewed-by: Dylan Baker <dylan.c.baker@intel.com>
Looks like checking both sources was intended, instead of the first one
twice. Found with Coccinelle, coccinellery/xand/xand.cocci semantic patch.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
This was just found while reading for other stuff,
src/core/hw/gfxip/gfx6/gfx6DepthStencilView.cpp.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We need to enable the pos float location 2 mode anytime we have
persample not just when forced by the frag shader.
This fixes:
dEQP-VK.pipeline.multisample.min_sample_shading*
Fixes: 58c97a079 (radv: enable location at sample when persample is forced.)
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Before we were adding -DHAVE_SSE41 which isn't what the code is
looking for, so some uses of the sse4.1 code were always being
skipped.
v2: Don't add any compile check for the quite old -msse4.1 option (Dylan)
Fixes: 84486f6462 ("meson: Enable SSE4.1 optimizations")
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
With the implementation of the tracking of the registers used in reladdr
asserting that a driver calling merge_register() uses the address register
is no longer needed.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Add a code line type that accepts one layer of indirect addressing and
add tests to check that temporary register access used for indirect
addressing is accounted for in the lifetime estimation.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
So far indirect addressing was not tracked to estimate the temporary
life time, and it was not needed, because code to load the address
registers was always emitted eliminating the reladdr* handles in the
past glsl-to.tgsi stages. Now, with Mareks patch allowing any 1D register
to be used for addressing on some hardware this changed, and
the tracking becomes necessary.
Because the registers have no direct indication on whether the reladdr* was
already loaded into an address register, the temporaries in reladdr* are
always tracked as reads. This may result in a slight over-estimation of the
lifetime in the cases when the load to the address register was emitted.
v2: no changes
v3: Use debug_log variable instead of directly writing to std::err in debugging
output.
v6: fix indention and typos
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com> (v1)
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Additional tests are added that check the tracking of access to temporaries
in if-else branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Improve the life-time evaluation of temporary registers by also tracking
writes in both if and else branches and in up to 32 nested scopes.
As a result the estimated required register life-times can be further
reduced enabling more registers to be merged.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
* Merge the classes MockCodeLine and MockCodelineWithSwizzle into
one, and refactor tests accordingly.
* Change memory allocations to use ralloc* interface.
v2:
* move the test classes into a conveniance library
* rename the Mock* classes to Fake* since they are not really
Mocks
* Base assertion of correct number of src and dst registers in tests
on what the operatand actually expects
* Fix number of destinations in one test
v6:
* fix local includes using "..." insteadof <...>
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Don't allocate a zero-sized array, when no texture offsets are given.
v5: correct spaces and empty lines
Reviewed-by: Brian Paul <brianp@vmware.com>(v4)
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com> (v1)
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Add the equal operator and the "<<" stream write operator for the
st_*_reg classes and the "<<" operator to the instruction class, and
make use of these operators in the debugging output.
v5: Fix empty lines
Reviewed-by: Brian Paul <brianp@vmware.com> (v4)
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Non-VBO sources files sometimes included vbo.h while others included
vbo_context.h. We're moving all public types, functions to the former.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
_vbo_DestroyContext() can be safely called even if there's no VBO
module. Removes a dependency on the vbo_context() function.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
The Vulkan spec says:
"pipelineBindPoint is a VkPipelineBindPoint indicating whether the
descriptors will be used by graphics pipelines or compute pipelines.
There is a separate set of bind points for each of graphics and
compute, so binding one does not disturb the other."
Up until now, we've been ignoring the pipeline bind point and had just
one bind point for everything. This commit separates things out into
separate bind points.
Tested-by: Józef Kucia <joseph.kucia@gmail.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102897
Cc: "18.0" <mesa-stable@lists.freedesktop.org>
It's now a function which returns the push descriptor set. Since we set
the error on the command buffer, returning the error is a little
redundant. Returning the descriptor set (or NULL on error) is more
convenient.
Tested-by: Józef Kucia <joseph.kucia@gmail.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: "18.0" <mesa-stable@lists.freedesktop.org>
There are several places where we'd already saved the pipeline off to a
temporary variable but, due to an artifact of history, weren't actually
using that temporary everywhere. No functional change.
Tested-by: Józef Kucia <joseph.kucia@gmail.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: "18.0" <mesa-stable@lists.freedesktop.org>
This splits anv_cmd_state_reset into separate init and finish functions.
This lets us share init code with cmd_buffer_create. This potentially
fixes subtle bugs where we may have missed some bit of state that needs
to get initialized on command buffer creation.
Tested-by: Józef Kucia <joseph.kucia@gmail.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: "18.0" <mesa-stable@lists.freedesktop.org>
This is ported from radeonsi and fixes:
dEQP-VK.pipeline.multisample_shader_builtin.sample_mask.bit_*
v2: don't call this path for radeonsi, it does it in the epilog.
use the radeonsi code path.
v3: handle NULL pCreateInfo->pMultisampleState properly (Samuel)
v3.1: set ps_iter_samples default to 1 (Bas)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Fixes: bdcbe7c76 (radv: add sample mask input support)
Signed-off-by: Dave Airlie <airlied@redhat.com>
radeonsi has a workaround for this, but it uses a R16A16 format,
which vulkan doesn't have, we could probably come up with a work
around but for now just avoid hw resolves.
Fixes:
dEQP-VK.renderpass.suballocation.multisample.r16g16_*norm*
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Fixes: 2a04f5481d (radv/meta: select resolve paths)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From reading AMDVLK it currently never uses hw resolve paths.
This patch takes from radeonsi which doesn't use hw resolve
for integer formats, and does the same for radv.
This fixes:
dEQP-VK.renderpass.suballocation.multisample*uint tests.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Fixes: 2a04f5481d (radv/meta: select resolve paths)
Signed-off-by: Dave Airlie <airlied@redhat.com>
Some of the hw resolve passes need the SPI color format setup
correctly.
This fixes lots of 16-bit and 32-bit format tests in
dEQP-VK.renderpass.suballocation.multisample*
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Fixes: f4e499ec79 "radv: add initial non-conformant radv vulkan driver"
Signed-off-by: Dave Airlie <airlied@redhat.com>
'cleanup' path is dereferencing 'svga' a lot, 'done' is a better choice.
Found by Coccinelle.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Defines
- HAVE_FUNC_ATTRIBUTE_RETURNS_NONNULL
- HAVE_FUNC_ATTRIBUTE_VISIBILITY
were misspelled.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
2018-01-23 15:39:57 +00:00
2265 changed files with 196565 additions and 98632 deletions
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=90311">Bug 90311</a> - Fail to build libglx with clang at linking stage</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=101442">Bug 101442</a> - Piglit shaders@ssa@fs-if-def-else-break fails with sb but passes with R600_DEBUG=nosb</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=102435">Bug 102435</a> - [skl,kbl] [drm] GPU HANG: ecode 9:0:0x86df7cf9, in csgo_linux64 [4947], reason: Hang on rcs, action: reset</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104163">Bug 104163</a> - [GEN9+] 2-3% perf drop in GfxBench Manhattan 3.1 from "i965: Disable regular fast-clears (CCS_D) on gen9+"</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104383">Bug 104383</a> - [KBL] Intel GPU hang with firefox</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104546">Bug 104546</a> - Crash happens when running compute pipeline after calling glxMakeCurrent two times</li>
</ul>
<h2>Changes</h2>
<p>Emil Velikov (2):</p>
<ul>
<li>docs: add sha256 checksums for 17.3.5</li>
<li>Update version to 17.3.6</li>
</ul>
<p>Jason Ekstrand (4):</p>
<ul>
<li>i965/draw: Do resolves properly for textures used by TXF</li>
<li>i965: Replace draw_aux_buffer_disabled with draw_aux_usage</li>
<li>i965/draw: Set NEW_AUX_STATE when draw aux changes</li>
<li>i965: Stop disabling aux during texture preparation</li>
</ul>
<p>Kenneth Graunke (1):</p>
<ul>
<li>i965: Don't disable CCS for RT dependencies when dispatching compute.</li>
</ul>
<p>Topi Pohjolainen (1):</p>
<ul>
<li>i965: Don't try to disable render aux buffers for compute</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105013">Bug 105013</a> - [regression] GLX+VA-API+clutter-gst video playback is corrupt with Mesa 17.3 (but is fine with 17.2)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105029">Bug 105029</a> - simdlib_512_avx512.inl:371:57: error: could not convert ‘_mm512_mask_blend_epi32((__mmask16)(ImmT), a, b)’ from ‘__m512i’ {aka ‘__vector(8) long long int’} to ‘SIMDImpl::SIMD512Impl::Float’</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105098">Bug 105098</a> - [RADV] GPU freeze with simple Vulkan App</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105103">Bug 105103</a> - Wayland master causes Mesa to fail to compile</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104636">Bug 104636</a> - [BSW/HD400] Aztec Ruins GL version GPU hangs</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105290">Bug 105290</a> - [BSW/HD400] SynMark OglCSDof GPU hangs when shaders come from cache</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105464">Bug 105464</a> - Reading per-patch outputs in Tessellation Control Shader returns undefined values</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105670">Bug 105670</a> - [regression][hang] Trine1EE hangs GPU after loading screen on Mesa3D-17.3 and later</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105717">Bug 105717</a> - [bisected] Mesa build tests fails: BIGENDIAN_CPU or LITTLEENDIAN_CPU must be defined</li>
</ul>
<h2>Changes</h2>
<p>Axel Davy (3):</p>
<ul>
<li>st/nine: Fix bad tracking of vs textures for NINESBT_ALL</li>
<li>st/nine: Fixes warning about implicit conversion</li>
<li>st/nine: Fix non inversible matrix check</li>
</ul>
<p>Caio Marcelo de Oliveira Filho (1):</p>
<ul>
<li>anv/pipeline: fail if TCS/TES compile fail</li>
</ul>
<p>Dave Airlie (1):</p>
<ul>
<li>radv: get correct offset into LDS for indexed vars.</li>
</ul>
<p>Derek Foreman (1):</p>
<ul>
<li>egl/wayland: Make swrast display_sync the correct queue</li>
</ul>
<p>Eric Engestrom (1):</p>
<ul>
<li>meson/configure: detect endian.h instead of trying to guess when it's available</li>
</ul>
<p>Ian Romanick (2):</p>
<ul>
<li>mesa: Don't write to user buffer in glGetTexParameterIuiv on error</li>
<li>i965/vec4: Fix null destination register in 3-source instructions</li>
</ul>
<p>Jason Ekstrand (1):</p>
<ul>
<li>i965: Emit texture cache invalidates around blorp_copy</li>
</ul>
<p>Jordan Justen (2):</p>
<ul>
<li>i965: Calculate thread_count in brw_alloc_stage_scratch</li>
<li>i965: Hard code CS scratch_ids_per_subslice for Cherryview</li>
</ul>
<p>Juan A. Suarez Romero (6):</p>
<ul>
<li>docs: add sha256 checksums for 17.3.7</li>
<li>cherry-ignore: ac/nir: pass the nir variable through tcs loading.</li>
<li>cherry-ignore: radv: handle exporting view index to fragment shader. (v1.1)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105317">Bug 105317</a> - The GPU Vega 56 was hang while try to pass #GraphicsFuzz shader15 test</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105440">Bug 105440</a> - GEN7: rendering issue on citra</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105442">Bug 105442</a> - Hang when running nine ff lighting shader with radeonsi</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105994">Bug 105994</a> - surface state leak when creating and destroying image views with aspectMask depth and stencil</li>
</ul>
<h2>Changes</h2>
<p>Andres Gomez (2):</p>
<ul>
<li>dri_util: when overriding, always reset the core version</li>
<li>mesa: adds some comments regarding MESA_GLES_VERSION_OVERRIDE usage</li>
</ul>
<p>Axel Davy (2):</p>
<ul>
<li>st/nine: Declare lighting consts for ff shaders</li>
<li>st/nine: Do not use scratch for face register</li>
</ul>
<p>Bas Nieuwenhuizen (1):</p>
<ul>
<li>ac/nir: Add workaround for GFX9 buffer views.</li>
</ul>
<p>Daniel Stone (1):</p>
<ul>
<li>st/dri: Initialise modifier to INVALID for DRI2</li>
</ul>
<p>Emil Velikov (1):</p>
<ul>
<li>glsl: remove unreachable assert()</li>
</ul>
<p>Eric Engestrom (1):</p>
<ul>
<li>gbm: remove never-implemented function</li>
</ul>
<p>Henri Verbeet (1):</p>
<ul>
<li>mesa: Inherit texture view multi-sample information from the original texture images.</li>
</ul>
<p>Iago Toral Quiroga (1):</p>
<ul>
<li>compiler/spirv: set is_shadow for depth comparitor sampling opcodes</li>
</ul>
<p>Jason Ekstrand (4):</p>
<ul>
<li>nir/vars_to_ssa: Remove copies from the correct set</li>
<li>nir/lower_indirect_derefs: Support interp_var_at intrinsics</li>
<li>intel/vec4: Set channel_sizes for MOV_INDIRECT sources</li>
<li>nir/lower_vec_to_movs: Only coalesce if the vec had a SSA destination</li>
</ul>
<p>Juan A. Suarez Romero (3):</p>
<ul>
<li>docs: add sha256 checksums for 17.3.8</li>
<li>cherry-ignore: Explicit 18.0 only nominations</li>
<li>Update version to 17.3.9</li>
</ul>
<p>Lionel Landwerlin (1):</p>
<ul>
<li>anv: fix number of planes for depth & stencil</li>
</ul>
<p>Marek Olšák (1):</p>
<ul>
<li>mesa: simplify MESA_GL_VERSION_OVERRIDE behavior of API override</li>
</ul>
<p>Samuel Pitoiset (1):</p>
<ul>
<li>radv: fix picking the method for resolve subpass</li>
</ul>
<p>Sergii Romantsov (1):</p>
<ul>
<li>i965: Extend the negative 32-bit deltas to 64-bits</li>
Note: some of the new features are only available with certain drivers.
</p>
<ul>
<li>Disk shader cache support for i965 when MESA_GLSL_CACHE_DISABLE environment variable is set to "0" or "false"</li>
<li>GL_ARB_shader_atomic_counters and GL_ARB_shader_atomic_counter_ops on r600/evergreen+</li>
<li>GL_ARB_shader_image_load_store and GL_ARB_shader_image_size on r600/evergreen+</li>
<li>GL_ARB_shader_storage_buffer_object on r600/evergreen+</li>
<li>GL_ARB_compute_shader on r600/evergreen+</li>
<li>GL_ARB_cull_distance on r600/evergreen+</li>
<li>GL_ARB_enhanced_layouts on r600/evergreen+</li>
<li>GL_ARB_bindless_texture on nvc0/kepler</li>
<li>OpenGL 4.3 on r600/evergreen with hw fp64 support</li>
<li>Support 1 binary format for GL_ARB_get_program_binary on i965.
(For the 18.0 release, 0 formats continue to be supported in
compatibility profiles.)</li>
<li>Cannonlake support on i965 and anv</li>
</ul>
<h2>Bug fixes</h2>
<ul>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=85564">Bug 85564</a> - Dead Island rendering issues</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=90311">Bug 90311</a> - Fail to build libglx with clang at linking stage</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=92363">Bug 92363</a> - [BSW/BDW] ogles1conform Gets test fails</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=94739">Bug 94739</a> - Mesa 11.1.2 implementation error: bad format MESA_FORMAT_Z_FLOAT32 in _mesa_unpack_uint_24_8_depth_stencil_row</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=97532">Bug 97532</a> - Regression: GLB 2.7 & Glmark-2 GLES versions segfault due to linker precision error (259fc505) on dead variable</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=101378">Bug 101378</a> - interpolateAtSample check for input parameter is too strict</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=101442">Bug 101442</a> - Piglit shaders@ssa@fs-if-def-else-break fails with sb but passes with R600_DEBUG=nosb</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=101560">Bug 101560</a> - SPIR-V OpSwitch with int64 not supported even though shaderInt64 is true</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=101691">Bug 101691</a> - gfx corruption on windowed 3d-apps running on dGPU</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=102354">Bug 102354</a> - Mesa 17.2 no longer can give SRGB-capable framebuffer on i965, even though Mesa 17.1.x does.</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=102358">Bug 102358</a> - WarThunder freezes at start, with activated vsync (vblank_mode=2)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=102435">Bug 102435</a> - [skl,kbl] [drm] GPU hang in Valve games based on Source 1</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=102503">Bug 102503</a> - Report SRGB framebuffer to SuperTuxKart to workaround SuperTuxKart crash</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=102665">Bug 102665</a> - test_glsl_to_tgsi_lifetime.cpp:53:67: error: ‘>>’ should be ‘>>’ within a nested template argument list</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=103283">Bug 103283</a> - drm_get_device_name_for_fd is broken on FreeBSD</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=103388">Bug 103388</a> - Linking libcltgsi.la (llvm/codegen/libclllvm_la-common.lo) fails with "error: no match for 'operator-'" with GCC-7, Mesa from Git and current LLVM revisions</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=103412">Bug 103412</a> - gallium/wgl: Another fix to context creation without prior SetPixelFormat()</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=103496">Bug 103496</a> - svga_screen.c:26:46: error: git_sha1.h: No such file or directory</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=103513">Bug 103513</a> - [build failure] radv_shader.c:683:2: error: format not a string literal and no format arguments [-Werror=format-security]</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=103519">Bug 103519</a> - wayland egl apps crash on start with mesa 17.2</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=103529">Bug 103529</a> - [GM45] GPU hang with mpv fullscreen (bisected)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=103537">Bug 103537</a> - i965: Shadow of Mordor broken since commit 379b24a40d3d34ffdaaeb1b328f50e28ecb01468 on Haswell</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=103544">Bug 103544</a> - Graphical glitches r600 in game this war of mine linux native</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=103579">Bug 103579</a> - Vertex shader causes compiler to crash in SPIRV-to-NIR</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=103616">Bug 103616</a> - Increased difference from reference image in shaders</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=103674">Bug 103674</a> - u_queue.c:173:7: error: implicit declaration of function 'timespec_get' is invalid in C99</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=103784">Bug 103784</a> - [bisected] Egl changes breaks all of EGL</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=103787">Bug 103787</a> - [BDW,BSW] gpu hang on spec.arb_pipeline_statistics_query.arb_pipeline_statistics_query-comp</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=103808">Bug 103808</a> - [radeonsi, bisected] World of Warcraft scribbling all over screen</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=103902">Bug 103902</a> - Portal 2 game hangs at startup with latest mesa dev</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=103904">Bug 103904</a> - Source engine-based games won't hang at start without R600_DEBUG=vs</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=103955">Bug 103955</a> - Using array in structure results in wrong GLSL compilation output</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=103966">Bug 103966</a> - Mesa 17.2.5 implementation error: bad format MESA_FORMAT_Z_FLOAT32 in _mesa_unpack_uint_24_8_depth_stencil_row</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=103988">Bug 103988</a> - Intermittent piglit failures with shader cache enabled</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104005">Bug 104005</a> - [sklgt4e] GPU hangs in Car_Chase</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104119">Bug 104119</a> - radv: OpBitFieldInsert produces 0 with a loop counter for Insert</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104141">Bug 104141</a> - include/c11/threads_posix.h:96: undefined reference to `pthread_once'</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104163">Bug 104163</a> - [GEN9+] 2-3% perf drop in GfxBench Manhattan 3.1 from "i965: Disable regular fast-clears (CCS_D) on gen9+"</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104199">Bug 104199</a> - [i965 bisected] BIO and EM Vision in >Observer_ is broken since commit af2c320190f3c73180f1610c8df955a7fa2a4d09</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104213">Bug 104213</a> - NULL pointer access crashes on compiling Vulkan compute shaders after "anv: Add support for the variablePointers feature"</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104214">Bug 104214</a> - Dota crashes when switching from game to desktop</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104302">Bug 104302</a> - Wolfenstein 2 (2017) under wine graphical artifacting on RADV</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104331">Bug 104331</a> - [r600g] Ogre demo "TutorialUAV01" crash at r600_decompress_color_images</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104338">Bug 104338</a> - NULL pointer access crash on Sacha Willems' Vulkan raytracing demo after "spirv: Add basic type validation for OpLoad, OpStore, and OpCopyMemory"</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104359">Bug 104359</a> - Mesa freezes in "vtn_cfg_walk_blocks" with Sacha Willems' hdr, parallaxmapping and specializationconstants Vulkan demos</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104381">Bug 104381</a> - swr fails to build since llvm-svn r321257</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104383">Bug 104383</a> - [KBL] Intel GPU hang with firefox</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104492">Bug 104492</a> - Compute Shader: Wrong alignment when assigning struct value to structured SSBO</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104546">Bug 104546</a> - Crash happens when running compute pipeline after calling glxMakeCurrent two times</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104551">Bug 104551</a> - Check if Mako templates for Python are installed</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104625">Bug 104625</a> - semicolon after if</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104636">Bug 104636</a> - [BSW/HD400] Aztec Ruins GL version GPU hangs</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104749">Bug 104749</a> - rasterizer/jitter/JitManager.cpp:252:91: error: no matching function for call to ‘llvm::DIBuilder::createBasicType(const char [8], int, llvm::dwarf::TypeKind)’</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104762">Bug 104762</a> - Various segfaults/problems in qt/plasma</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104777">Bug 104777</a> - Attaching multiple shader objects for the same stage to a GLSL program triggers a linker error</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104884">Bug 104884</a> - memory leak with intel i965 mesa when running android container in Ubuntu</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104905">Bug 104905</a> - SpvOpFOrdEqual doesn't return correct results for NaNs</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104915">Bug 104915</a> - Indexed SHADING_LANGUAGE_VERSION query not supported</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105013">Bug 105013</a> - [regression] GLX+VA-API+clutter-gst video playback is corrupt with Mesa 17.3 (but is fine with 17.2)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105029">Bug 105029</a> - simdlib_512_avx512.inl:371:57: error: could not convert ‘_mm512_mask_blend_epi32((__mmask16)(ImmT), a, b)’ from ‘__m512i’ {aka ‘__vector(8) long long int’} to ‘SIMDImpl::SIMD512Impl::Float’</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105065">Bug 105065</a> - Qt Programs occasionally fail to render with new Mesa (glGetProgramBinary)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105098">Bug 105098</a> - [RADV] GPU freeze with simple Vulkan App</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105103">Bug 105103</a> - Wayland master causes Mesa to fail to compile</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105290">Bug 105290</a> - [BSW/HD400] SynMark OglCSDof GPU hangs when shaders come from cache</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105292">Bug 105292</a> - vkGetQueryPoolResults returns incorrect query status for large query buffers (bisected)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105436">Bug 105436</a> - Blinking textures in UT2004 [bisected]</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105464">Bug 105464</a> - Reading per-patch outputs in Tessellation Control Shader returns undefined values</li>
</ul>
<h2>Changes</h2>
<ul>
<li>Remove incomplete GLX_MESA_set_3dfx_mode from the Xlib libGL</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=102542">Bug 102542</a> - mesa-17.2.0/src/gallium/state_trackers/nine/nine_ff.c:1938: bad assignment ?</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105317">Bug 105317</a> - The GPU Vega 56 was hang while try to pass #GraphicsFuzz shader15 test</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105440">Bug 105440</a> - GEN7: rendering issue on citra</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105442">Bug 105442</a> - Hang when running nine ff lighting shader with radeonsi</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105567">Bug 105567</a> - meson/ninja: 1. mesa/vdpau incorrect symlinks in DESTDIR and 2. Ddri-drivers-path Dvdpau-libs-path overrides DESTDIR</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105670">Bug 105670</a> - [regression][hang] Trine1EE hangs GPU after loading screen on Mesa3D-17.3 and later</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105717">Bug 105717</a> - [bisected] Mesa build tests fails: BIGENDIAN_CPU or LITTLEENDIAN_CPU must be defined</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105942">Bug 105942</a> - Graphical artefacts after update to mesa 18.0.0-2</li>
</ul>
<h2>Changes</h2>
<p>Andres Gomez (2):</p>
<ul>
<li>dri_util: when overriding, always reset the core version</li>
<li>mesa: adds some comments regarding MESA_GLES_VERSION_OVERRIDE usage</li>
</ul>
<p>Axel Davy (5):</p>
<ul>
<li>st/nine: Fix bad tracking of vs textures for NINESBT_ALL</li>
<li>st/nine: Fixes warning about implicit conversion</li>
<li>st/nine: Fix non inversible matrix check</li>
<li>st/nine: Declare lighting consts for ff shaders</li>
<li>st/nine: Do not use scratch for face register</li>
</ul>
<p>Bas Nieuwenhuizen (3):</p>
<ul>
<li>ac/nir: Add workaround for GFX9 buffer views.</li>
<li>radv: Don't set instance count using predication.</li>
<li>radv: Always reset draw user SGPRs after secondary command buffer.</li>
</ul>
<p>Caio Marcelo de Oliveira Filho (1):</p>
<ul>
<li>anv/pipeline: fail if TCS/TES compile fail</li>
</ul>
<p>Daniel Stone (1):</p>
<ul>
<li>st/dri: Initialise modifier to INVALID for DRI2</li>
</ul>
<p>Derek Foreman (1):</p>
<ul>
<li>egl/wayland: Make swrast display_sync the correct queue</li>
</ul>
<p>Dylan Baker (4):</p>
<ul>
<li>meson: don't use compiler.has_header</li>
<li>autotools: include meson_get_version</li>
<li>meson: Set .so version for xa like autotools does</li>
<li>meson: fix megadriver symlinking</li>
</ul>
<p>Emil Velikov (1):</p>
<ul>
<li>docs: add sha256 checksums for 18.0.0</li>
</ul>
<p>Eric Engestrom (3):</p>
<ul>
<li>meson/configure: detect endian.h instead of trying to guess when it's available</li>
<li>docs: fix 18.0 release note version</li>
<li>gbm: remove never-implemented function</li>
</ul>
<p>Henri Verbeet (1):</p>
<ul>
<li>mesa: Inherit texture view multi-sample information from the original texture images.</li>
</ul>
<p>Iago Toral Quiroga (1):</p>
<ul>
<li>compiler/spirv: set is_shadow for depth comparitor sampling opcodes</li>
</ul>
<p>Ian Romanick (1):</p>
<ul>
<li>i965/vec4: Fix null destination register in 3-source instructions</li>
</ul>
<p>Jason Ekstrand (4):</p>
<ul>
<li>nir/vars_to_ssa: Remove copies from the correct set</li>
<li>nir/lower_indirect_derefs: Support interp_var_at intrinsics</li>
<li>intel/vec4: Set channel_sizes for MOV_INDIRECT sources</li>
<li>nir/lower_vec_to_movs: Only coalesce if the vec had a SSA destination</li>
</ul>
<p>Juan A. Suarez Romero (5):</p>
<ul>
<li>cherry-ignore anv: Be more careful about fast-clear colors</li>
<li>cherry-ignore: ac/shader: fix vertex input with components.</li>
<li>cherry-ignore: radv: handle exporting view index to fragment shader. (v1.1)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105775">Bug 105775</a> - SI reaches the maximum IB size in dwords and fail to submit</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105994">Bug 105994</a> - surface state leak when creating and destroying image views with aspectMask depth and stencil</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106074">Bug 106074</a> - radv: si_scissor_from_viewport returns incorrect result when using half-pixel viewport offset</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106126">Bug 106126</a> - eglMakeCurrent does not always ensure dri_drawable->update_drawable_info has been called for a new EGLSurface if another has been created and destroyed first</li>
</ul>
<h2>Changes</h2>
<p>Bas Nieuwenhuizen (2):</p>
<ul>
<li>ac/nir: Make the GFX9 buffer size fix apply to image loads/atomics too.</li>
<li>radv: Mark GTT memory as device local for APUs.</li>
</ul>
<p>Dylan Baker (2):</p>
<ul>
<li>bin/install_megadrivers: fix DESTDIR and -D*-path</li>
<li>meson: don't build classic mesa tests without dri_drivers</li>
</ul>
<p>Ian Romanick (1):</p>
<ul>
<li>intel/compiler: Add scheduler deps for instructions that implicitly read g0</li>
</ul>
<p>Jason Ekstrand (1):</p>
<ul>
<li>i965/fs: Return mlen * 8 for size_read() for INTERPOLATE_AT_*</li>
</ul>
<p>Johan Klokkhammer Helsing (1):</p>
<ul>
<li>st/dri: Fix dangling pointer to a destroyed dri_drawable</li>
</ul>
<p>Juan A. Suarez Romero (4):</p>
<ul>
<li>docs: add sha256 checksums for 18.0.1</li>
<li>travis: radv needs LLVM 4.0</li>
<li>cherry-ignore: add explicit 18.1 only nominations</li>
<li>Update version to 18.0.2</li>
</ul>
<p>Kenneth Graunke (1):</p>
<ul>
<li>i965: Fix shadow batches to be the same size as the real BO.</li>
</ul>
<p>Lionel Landwerlin (1):</p>
<ul>
<li>anv: fix number of planes for depth & stencil</li>
</ul>
<p>Lucas Stach (1):</p>
<ul>
<li>etnaviv: fix texture_format_needs_swiz</li>
</ul>
<p>Marek Olšák (3):</p>
<ul>
<li>radeonsi/gfx9: fix a hang with an empty first IB</li>
<li>glsl_to_tgsi: try harder to lower unsupported ir_binop_vector_extract</li>
<li>Revert "st/dri: Fix dangling pointer to a destroyed dri_drawable"</li>
</ul>
<p>Samuel Pitoiset (2):</p>
<ul>
<li>radv: fix scissor computation when using half-pixel viewport offset</li>
<li>radv/winsys: allow to submit up to 4 IBs for chips without chaining</li>
</ul>
<p>Thomas Hellstrom (1):</p>
<ul>
<li>svga: Fix incorrect advertizing of EGL_KHR_gl_colorspace</li>
</ul>
<p>Timothy Arceri (1):</p>
<ul>
<li>mesa: free debug messages when destroying the debug state</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106315">Bug 106315</a> - The witness + dxvk suffers flickering garbage</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106465">Bug 106465</a> - No test for Image Load/Store on format-incompatible texture buffer</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106479">Bug 106479</a> - NDEBUG not defined for libamdgpu_addrlib</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106481">Bug 106481</a> - No test for Image Load/Store on texture buffer sized greater than MAX_TEXTURE_BUFFER_SIZE_ARB</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106504">Bug 106504</a> - vulkan SPIR-V parsing failed at ../src/compiler/spirv/vtn_cfg.c:381</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106587">Bug 106587</a> - Dota2 is very dark when using vulkan render on a Intel << AMD prime setup</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=98281">Bug 98281</a> - 'message's in ctx->Debug.LogMessages[] seem to leak.</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=99549">Bug 99549</a> - pp: Failed to translate a shader</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=100259">Bug 100259</a> - [EGL] [GBM] undefined reference to `gbm_bo_create_with_modifiers'</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=101408">Bug 101408</a> - [Gen8+] Xonotic fails to render one of the weapons</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=101442">Bug 101442</a> - Piglit shaders@ssa@fs-if-def-else-break fails with sb but passes with R600_DEBUG=nosb</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=102542">Bug 102542</a> - mesa-17.2.0/src/gallium/state_trackers/nine/nine_ff.c:1938: bad assignment ?</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=102905">Bug 102905</a> - [R600] Miscompilation of TGSI to VLIW causes artifacts in Gallium Nine with Crysis2 bump mapping</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104741">Bug 104741</a> - Graphic corruption for Android apps Telegram and KineMaster</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104762">Bug 104762</a> - Various segfaults/problems in qt/plasma</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104777">Bug 104777</a> - Attaching multiple shader objects for the same stage to a GLSL program triggers a linker error</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104794">Bug 104794</a> - piglit.spec.arb_internalformat_query2.samples and num_sample_counts pname checks</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104803">Bug 104803</a> - SIGSEGV in state_tracker/st_glsl_to_tgsi_temprename.cpp</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104863">Bug 104863</a> - 186 assertions in piglit</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104884">Bug 104884</a> - memory leak with intel i965 mesa when running android container in Ubuntu</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104905">Bug 104905</a> - SpvOpFOrdEqual doesn't return correct results for NaNs</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104908">Bug 104908</a> - Texture Compression Hint not converted to enum16</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104915">Bug 104915</a> - Indexed SHADING_LANGUAGE_VERSION query not supported</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105013">Bug 105013</a> - [regression] GLX+VA-API+clutter-gst video playback is corrupt with Mesa 17.3 (but is fine with 17.2)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105026">Bug 105026</a> - glxgears asserts with pp_jimenezmlaa=1</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105029">Bug 105029</a> - simdlib_512_avx512.inl:371:57: error: could not convert ‘_mm512_mask_blend_epi32((__mmask16)(ImmT), a, b)’ from ‘__m512i’ {aka ‘__vector(8) long long int’} to ‘SIMDImpl::SIMD512Impl::Float’</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105065">Bug 105065</a> - Qt Programs occasionally fail to render with new Mesa (glGetProgramBinary)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105161">Bug 105161</a> - KHR_blend_equation_advanced doesn't work in GLSL 1.10-1.40 shaders</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105183">Bug 105183</a> - Weird assertion in NIR linker</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105211">Bug 105211</a> - build failure after zwp_dmabuf commit if wayland-protocols is not installed</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105238">Bug 105238</a> - ast.h:648:16: error: union member 'i' has a non-trivial constructor</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105255">Bug 105255</a> - Waiting for fences without waitAll is not implemented</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105262">Bug 105262</a> - [R600] [BISECTED] ttf fonts are invisible in many programs</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105292">Bug 105292</a> - vkGetQueryPoolResults returns incorrect query status for large query buffers (bisected)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105317">Bug 105317</a> - The GPU Vega 56 was hang while try to pass #GraphicsFuzz shader15 test</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105497">Bug 105497</a> - shader-db crashes on 72 core system after ast_type_qualifier bitset change</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105717">Bug 105717</a> - [bisected] Mesa build tests fails: BIGENDIAN_CPU or LITTLEENDIAN_CPU must be defined</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105737">Bug 105737</a> - st_tests_common.cpp:140:42: error: no matching function for call to 'tgsi_get_opcode_info'</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105738">Bug 105738</a> - commit f7ffa504a065dc2631fd38cc5fe885b277f4e7e7 causes artifacting in radv</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105740">Bug 105740</a> - glsl_types.cpp(524): error: a dynamically-initialized local static variable is not allowed inside of a statement expression</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105775">Bug 105775</a> - SI reaches the maximum IB size in dwords and fail to submit</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105807">Bug 105807</a> - [Regression, bisected]: 3D Rendering not working correctly in Warhammer 40k: Dawn of War II</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105817">Bug 105817</a> - scons build broken by glSpecializeShaderARB</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105820">Bug 105820</a> - [m32] piglit regressions relinking program without shaders</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105942">Bug 105942</a> - Graphical artefacts after update to mesa 18.0.0-2</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105952">Bug 105952</a> - radv causes GPU hang on SI</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105960">Bug 105960</a> - [bisected] meson build test fails with: undefined reference to `etna_pm_create_query'</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105994">Bug 105994</a> - surface state leak when creating and destroying image views with aspectMask depth and stencil</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106074">Bug 106074</a> - radv: si_scissor_from_viewport returns incorrect result when using half-pixel viewport offset</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106126">Bug 106126</a> - eglMakeCurrent does not always ensure dri_drawable->update_drawable_info has been called for a new EGLSurface if another has been created and destroyed first</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106133">Bug 106133</a> - make check "OSError: [Errno 24] Too many open files"</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106147">Bug 106147</a> - SIGBUS in write_reloc() when Sacha Willems' "texture3d" Vulkan demo starts</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106174">Bug 106174</a> - vulkan dota2 broken (segfaulting), found bug commit</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106180">Bug 106180</a> - [bisected] radv vulkan smoke test black screen (Add support for DRI3 v1.2)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106243">Bug 106243</a> - [kbl] GPU HANG: 9:0:0x85dffffb, in Cinnamon</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105396">Bug 105396</a> - tc compatible htile sets depth of htiles of discarded fragments to 1.0</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105399">Bug 105399</a> - [snb] GPU hang: after geometry shader emits no geometry, the program hangs</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106756">Bug 106756</a> - Wine 3.9 crashes with DXVK on Just Cause 3 and Quantum Break on VEGA but works ON POLARIS</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106774">Bug 106774</a> - GLSL IR copy propagates loads of SSBOs</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106903">Bug 106903</a> - radv: Fragment shader output goes to wrong attachments when render targets are sparse</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106907">Bug 106907</a> - Correct Transform Feedback Varyings information is expected after using ProgramBinary</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106906">Bug 106906</a> - Failed to recongnize keyword “sampler2DRect” and "sampler2DRectShadow"</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106928">Bug 106928</a> - When starting a match Rocket League crashes on "Go"</li>
Note: some of the new features are only available with certain drivers.
</p>
<ul>
<li>OpenGL 4.3 on virgl</li>
<li>OpenGL 4.4 Compatibility profile on radeonsi</li>
<li>OpenGL ES 3.2 on radeonsi and virgl</li>
<li>GL_ARB_ES3_2_compatibility on radeonsi</li>
<li>GL_ARB_fragment_shader_interlock on i965</li>
<li>GL_ARB_sample_locations and GL_NV_sample_locations on nvc0 (GM200+)</li>
<li>GL_ANDROID_extension_pack_es31a on radeonsi.</li>
<li>GL_KHR_texture_compression_astc_ldr on radeonsi</li>
<li>GL_NV_conservative_raster and GL_NV_conservative_raster_dilate on nvc0 (GM200+)</li>
<li>GL_NV_conservative_raster_pre_snap_triangles on nvc0 (GP102+)</li>
<li>multisampled images on nvc0 (GM107+) (now supported on GF100+)</li>
</ul>
<h2>Bug fixes</h2>
<ul>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=13728">Bug 13728</a> - [G965] Some objects in Neverwinter Nights Linux version not displayed correctly</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=61761">Bug 61761</a> - glPolygonOffsetEXT, OFFSET_BIAS incorrectly set to a huge number</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=65422">Bug 65422</a> - Rename api_validate.[ch] to draw_validate.[ch]</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=78097">Bug 78097</a> - glUniform1ui and friends not supported by display lists</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=99116">Bug 99116</a> - Wine DirectDraw programs showing only a blackscreen when using Mesa Gallium drivers</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=99730">Bug 99730</a> - Metro Redux game(s) needs override for midshader extension declaration</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=100177">Bug 100177</a> - [GM206] Misrendering in XCOM Ennemy Within</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=100430">Bug 100430</a> - [radv] graphical glitches on dolphin emulator</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=101247">Bug 101247</a> - Mesa fails to link GLSL programs with unused output blocks</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=102678">Bug 102678</a> - gl_BaseVertex should always be zero when the draw command has no <basevertex> parameter</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=103274">Bug 103274</a> - BRW allocates too much heap memory</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104388">Bug 104388</a> - [snb] GPU HANG: ecode 6:0:0x85fffff8 in fgfs</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104809">Bug 104809</a> - anv: DOOM 2016 and Wolfenstein II:The New Colossus crash due to not having depthBoundsTest</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105351">Bug 105351</a> - [Gen6+] piglit's arb_shader_image_load_store-host-mem-barrier fails with a glGetTexSubImage fallback path</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105374">Bug 105374</a> - texture3d, a SaschaWillems demo, assert fails</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105396">Bug 105396</a> - tc compatible htile sets depth of htiles of discarded fragments to 1.0</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105399">Bug 105399</a> - [snb] GPU hang: after geometry shader emits no geometry, the program hangs</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105497">Bug 105497</a> - shader-db crashes on 72 core system after ast_type_qualifier bitset change</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105613">Bug 105613</a> - Compute shader locks up within nested "for" loop</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105731">Bug 105731</a> - linker error "fragment shader input ... has no matching output in the previous stage" when previous stage's output declaration in a separate shader object</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105904">Bug 105904</a> - Needed to delete mesa shader cache after driver upgrade for 32 bit wine vulkan programs to work.</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106133">Bug 106133</a> - make check "OSError: [Errno 24] Too many open files"</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106163">Bug 106163</a> - r600/sb: optimizer tries to schedule access to different array elements in one instruction group</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106174">Bug 106174</a> - vulkan dota2 broken (segfaulting), found bug commit</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106180">Bug 106180</a> - [bisected] radv vulkan smoke test black screen (Add support for DRI3 v1.2)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106232">Bug 106232</a> - LLVM unit tests have error in random number handling</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106243">Bug 106243</a> - [kbl] GPU HANG: 9:0:0x85dffffb, in Cinnamon</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106315">Bug 106315</a> - The witness + dxvk suffers flickering garbage</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106331">Bug 106331</a> - radv doesnt support VK_FORMAT_R32G32B32_SFLOAT</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106499">Bug 106499</a> - [regression, bisected] Several games crash on start</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106504">Bug 106504</a> - vulkan SPIR-V parsing failed at ../src/compiler/spirv/vtn_cfg.c:381</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106511">Bug 106511</a> - radv: MSAA broken on SI (assertion failure in vkCreateImage)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106587">Bug 106587</a> - Dota2 is very dark when using vulkan render on a Intel << AMD prime setup</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106594">Bug 106594</a> - [regression,apitrace,bisected] Prison Architect rendered unplayable by multicoloured flickering triangles and overlayed triangles when performing certain actions</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106642">Bug 106642</a> - X server crashes in i965 on desktop startup when DRI3 v1.2 / modifier support is enabled</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106643">Bug 106643</a> - double free when exporting a temporarily imported semaphore</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106673">Bug 106673</a> - [bisected] Steam is unusable since commit 5c33e8c7</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106687">Bug 106687</a> - radv: Fast color clears use incorrect format</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106708">Bug 106708</a> - [SKL/KBL/GLK] 2-3% performance drop in SynMark DrvState and 5-9% drop on SynMark Multithread</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106748">Bug 106748</a> - st/mesa: use PIPE_CAP_GLSL_FEATURE_LEVEL_COMPATIBILITY broke qemu -display sdl,gl=on</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106756">Bug 106756</a> - Wine 3.9 crashes with DXVK on Just Cause 3 and Quantum Break on VEGA but works ON POLARIS</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106774">Bug 106774</a> - GLSL IR copy propagates loads of SSBOs</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106776">Bug 106776</a> - vma_random unrecognized command line option "-std=c++11"</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106778">Bug 106778</a> - Files missing from tarball - intel_sanitize_gpu.*</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106779">Bug 106779</a> - Files missing from tarball - u_debug_stack_android.cpp</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106784">Bug 106784</a> - 18.1.1 autotools build fail without mako</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106801">Bug 106801</a> - vma_random_test.cpp:239:18: error: non-constant-expression cannot be narrowed from type 'unsigned long' to 'uint_fast32_t' (aka 'unsigned int') in initializer list [-Wc++11-narrowing]</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106810">Bug 106810</a> - ProgramBinary does not switch program correctly when using transform feedback</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106823">Bug 106823</a> - Failed to recongnize keyword of shader code</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106830">Bug 106830</a> - [bisected] 32 bit tests (deqp, piglit, glcts, vulkancts) crashing on all platforms</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106861">Bug 106861</a> - fatal error: wayland-egl-backend.h: No such file or directory compilation terminated.</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106903">Bug 106903</a> - radv: Fragment shader output goes to wrong attachments when render targets are sparse</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106906">Bug 106906</a> - Failed to recongnize keyword “sampler2DRect” and "sampler2DRectShadow"</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106907">Bug 106907</a> - Correct Transform Feedback Varyings information is expected after using ProgramBinary</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106928">Bug 106928</a> - When starting a match Rocket League crashes on "Go"</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106941">Bug 106941</a> - Intel ANV vulkan driver exposing version 1.1.0 which is incorrect</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106986">Bug 106986</a> - glGetQueryiv error when querying number of result bits for GL_ANY_SAMPLES_PASSED_CONSERVATIVE</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106997">Bug 106997</a> - [Regression]. Dying light game is crashing on latest mesa</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107098">Bug 107098</a> - Segfault after munmap(kms_sw_dt->ro_mapped)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107117">Bug 107117</a> - mesa-18.1: regression with TFP on intel with modesettings and glamor acceleration</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107190">Bug 107190</a> - Got seg fault on snb when use INTEL_DEBUG=bat</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107212">Bug 107212</a> - Dual-Core CPU E5500 / G45: RetroArch with reicast core results in corrupted graphics</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107223">Bug 107223</a> - [GEN9+] 50% perf drop in SynMark Fill* tests (E2E RBC gets disabled?)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107248">Bug 107248</a> - [G45 ILK G965] Texture handling broken</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107275">Bug 107275</a> - NIR segfaults after spirv-opt</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107276">Bug 107276</a> - radv: OpBitfieldUExtract returns incorrect result when count is zero</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107295">Bug 107295</a> - Access violation on glDrawArrays with count >= 2048</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107305">Bug 107305</a> - glsl/opt_copy_propagation_elements.cpp:72:9: error: delegating constructors are permitted only in C++11</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107312">Bug 107312</a> - Mesa-git RPM build fails after commit 8cacf38f527d42e41441ef8c25d95d4b2f4e8602</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107359">Bug 107359</a> - [Regression] [bisected] [OpenGL CTS] [SKL,BDW] KHR-GL46.texture_barrier*-texels, GTF-GL46.gtf21.GL2FixedTests.buffer_corners.buffer_corners, and GTF-GL46.gtf21.GL2FixedTests.stencil_plane_corners.stencil_plane_corners fail with some configuration</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107366">Bug 107366</a> - NIR verification crashes on piglit tests</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107443">Bug 107443</a> - Build error on arm64: v3d_decoder.c:837:17: error: format not a string literal and no format arguments [-Werror=format-security]</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107460">Bug 107460</a> - radv: OpControlBarrier does not always work correctly (bisected)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107477">Bug 107477</a> - [DXVK] Setting high shader quality in GTA V results in LLVM error</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107510">Bug 107510</a> - [GEN8+] up to 10% perf drop on several 3D benchmarks</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107544">Bug 107544</a> - intel/decoder: out of bounds group_iter</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107550">Bug 107550</a> - "0[2]" as function parameter hits assert</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107579">Bug 107579</a> - [SNB] The graphic corruption when we reuse the GS compiled and used for TFB when statebuffer contain magic trash in the unused space</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107601">Bug 107601</a> - Rise of the Tomb Raider Segmentation Fault when the game starts</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107610">Bug 107610</a> - Dolphin emulator mis-renders shadow overlay in Super Mario Sunshine</li>
</ul>
<h2>Changes</h2>
<ul>
<li>Removed GL_EXT_polygon_offset applications should use glPolygonOffset instead.</li>
<li>Removed libwayland-egl, now part of Wayland</li>
<h1>Mesa 18.2.1 Release Notes / September 21, 2018</h1>
<p>
Mesa 18.2.1 is a bug fix release which fixes bugs found since the 18.2.0 release.
</p>
<p>
Mesa 18.2.0 implements the OpenGL 4.5 API, but the version reported by
glGetString(GL_VERSION) or glGetIntegerv(GL_MAJOR_VERSION) /
glGetIntegerv(GL_MINOR_VERSION) depends on the particular driver being used.
Some drivers don't support all the features required in OpenGL 4.5. OpenGL
4.5 is <strong>only</strong> available if requested at context creation.
Compatibility contexts may report a lower version depending on each driver.
</p>
<h2>SHA256 checksums</h2>
<pre>
TBD
</pre>
<h2>New features</h2>
<p>None</p>
<h2>Bug fixes</h2>
<ul>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=103241">Bug 103241</a> - Anv crashes when using 64-bit vertex inputs</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107280">Bug 107280</a> - [DXVK] Batman: Arkham City with tessellation enabled hangs on SKL GT4</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107772">Bug 107772</a> - Mesa preprocessor matches if(def)s & endifs incorrectly</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107779">Bug 107779</a> - Access violation with some games</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107810">Bug 107810</a> - The 'va_end' call is missed after 'va_copy' in 'util_vsnprintf' function under windows</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107832">Bug 107832</a> - Gallium picking A16L16 formats when emulating INTENSITY16 conflicts with mesa</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107843">Bug 107843</a> - 32bit Mesa build failes with meson.</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107879">Bug 107879</a> - crash happens when link program</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107891">Bug 107891</a> - [wine, regression, bisected] RAGE, Wolfenstein The New Order hangs in menu</li>
</ul>
<h2>Changes</h2>
<p>Andres Gomez (3):</p>
<ul>
<li>docs: add sha256 checksums for 18.2.0</li>
<li>Revert "Revert "glsl: skip stringification in preprocessor if in unreachable branch""</li>
<li>cherry-ignore: i965/tools: 32bit compilation with meson</li>
</ul>
<p>Andrii Simiklit (4):</p>
<ul>
<li>apple/glx/log: added missing va_end() after va_copy()</li>
<li>mesa/util: don't use the same 'va_list' instance twice</li>
<li>mesa/util: don't ignore NULL returned from 'malloc'</li>
<li>mesa/util: add missing va_end() after va_copy()</li>
</ul>
<p>Bas Nieuwenhuizen (5):</p>
<ul>
<li>radv: Support v3 of VK_EXT_vertex_attribute_divisor.</li>
<li>radv: Set the user SGPR MSB for Vega.</li>
<li>radv: Only allow 16 user SGPRs for compute on GFX9+.</li>
<li>radv: Use build ID if available for cache UUID.</li>
<li>radv: Fix driver UUID SHA1 init.</li>
</ul>
<p>Christopher Egert (1):</p>
<ul>
<li>radeon: fix ColorMask</li>
</ul>
<p>Dave Airlie (1):</p>
<ul>
<li>virgl: don't send a shader create with no data. (v2)</li>
</ul>
<p>Dylan Baker (1):</p>
<ul>
<li>meson: Print a message about why a libdrm version was selected</li>
</ul>
<p>Eric Anholt (2):</p>
<ul>
<li>v3d: Fix SRC_ALPHA_SATURATE blending for RTs without alpha.</li>
<li>v3d: Fix setup of the VCM cache size.</li>
</ul>
<p>Erik Faye-Lund (2):</p>
<ul>
<li>winsys/virgl: avoid unintended behavior</li>
<li>virgl: adjust strides when mapping temp-resources</li>
# else /* for use with static link lib build of Win32 edition only */
# define GLAPI extern
# endif/* _STATIC_MESA support */
# endif
# if defined(__MINGW32__) && defined(GL_NO_STDCALL) || defined(UNDER_CE) /* The generated DLLs by MingW with STDCALL are not compatible with the ones done by Microsoft's compilers */
description:'List of dri drivers to build. If this is set to auto all drivers applicable to the target OS/architecture will be built'
)
option(
'dri-drivers-path',
type:'string',
value:'',
description:'Location of dri drivers. Default: $libdir/dri.'
description:'Location to install dri drivers. Default: $libdir/dri.'
)
option(
'dri-search-path',
type:'string',
value:'',
description:'Locations to search for dri drivers, passed as colon separated list. Default: dri-drivers-path.'
)
option(
'gallium-drivers',
type:'string',
value:'auto',
description:'comma separated list of gallium drivers to build. If this is set to auto all drivers applicable to the target OS/architecture will be built'
description:'List of gallium drivers to build. If this is set to auto all drivers applicable to the target OS/architecture will be built'
)
option(
'gallium-extra-hud',
@@ -85,8 +100,8 @@ option(
'gallium-omx',
type:'combo',
value:'auto',
choices:['auto','true','false'],
description:'enable gallium omx bellagio state tracker.',
choices:['auto','disabled','bellagio','tizonia'],
description:'enable gallium omx state tracker.',
)
option(
'omx-libs-path',
@@ -135,9 +150,10 @@ option(
)
option(
'vulkan-drivers',
type:'string',
value:'auto',
description:'comma separated list of vulkan drivers to build. If this is set to auto all drivers applicable to the target OS/architecture will be built'
type:'array',
value:['auto'],
choices:['','auto','amd','intel'],
description:'List of vulkan drivers to build. If this is set to auto all drivers applicable to the target OS/architecture will be built'
)
option(
'shader-cache',
@@ -208,6 +224,12 @@ option(
value:true,
description:'Build assembly code if possible'
)
option(
'glx-read-only-text',
type:'boolean',
value:false,
description:'Disable writable .text section on x86 (decreases performance)'
)
option(
'llvm',
type:'combo',
@@ -242,12 +264,6 @@ option(
value:false,
description:'Build unit tests. Currently this will build *all* unit tests, which may build more than expected.'
)
option(
'texture-float',
type:'boolean',
value:false,
description:'Enable floating point textures and renderbuffers. This option may be patent encumbered, please read docs/patents.txt and consult with your lawyer before turning this on.'
UINT_32m_minPitchAlignPixels;///< Minimum pitch alignment in pixels
UINT_32m_maxSamples;///< Max numSamples
UINT_32m_maxBaseAlign;///< Max base alignment for data surface
UINT_32m_maxMetaBaseAlign;///< Max base alignment for metadata
private:
ElemLib*m_pElemLib;///< Element Lib pointer
};
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
