Use the trick of adding and then subtracting 2**52 (52 is the number of
explicit mantissa bits a double-precision floating-point value has) to
implement round-to-even.
Cuts the number of instructions on SKL of the piglit test
fs-roundEven-double.shader_test from 109 to 21.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
This batch->cleared value is only used to decide to use sysmem rendering
or not, so it should include any buffers that are affected by a clear.
This is required because the a2xx fast clear doesn't work with sysmem
rendering. The a22x "normal" clear path doesn't work with sysmem either.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Depth can be used even when there is no restore/resolve of depth. This
happens when the depth buffer is invalidated after rendering to avoid
the resolve operation.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Set dirty bits on invalidate to trigger invalidate logic in fd_draw_vbo.
Also, resource_written for color needs to be after the invalidate logic.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
And before someone actually starts implementing DiscardFramebuffer()
lets rework the interface to something that is actually usable.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This allows freedreno to be aware of the depth invalidate when flushing
batches on flush_resource.
AFAIK, the only other driver which might care about this change is vc4,
where I think it should help by allowing the depth invalidate to work with
GALLIUM_HUD.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Eric Anholt <eric@anholt.net>
Check if a pixel format is supported by the Wayland servers gpu driver
before exposing it to the client via wl_drm, so we avoid reporting formats
to the client which the server gpu can't handle.
Restrict this reporting to the new color depth 30 formats for now, as the
ARGB/XRGB8888 and RGB565 formats are probably supported by every gpu under
the sun.
Atm. this is mostly useful to allow proper PRIME renderoffload for depth
30 formats on the typical Intel iGPU + NVidia dGPU "NVidia Optimus" laptop
combo.
Tested on Intel, AMD, NVidia with single-gpu setup and on a Intel + NVidia
Optimus setup.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Support PRIME render offload between a Wayland server gpu and a Wayland
client gpu with different channel ordering for their color formats,
e.g., between Intel drivers which currently only support ARGB2101010
and XRGB2101010 import/display and nouveau which only supports ABGR2101010
rendering and display on nv-50 and later.
In the wl_visuals table, we also store for each format an alternate
sibling format which stores colors at the same precision, but with
different channel ordering, e.g., ARGB2101010 <-> ABGR2101010.
If a given client-gpu renderable format is not supported by the server
for import, but the alternate format is supported by the server, expose
the client-gpu renderable format as a valid EGLConfig to the client. At
eglSwapBuffers time, during the blitImage() detiling blit from the client
backbuffer to the linear buffer, the client format is converted to the
server supported format. As we have to do a copy for PRIME anyway,
this channel swizzling conversion comes essentially for free.
Note that even if a server gpu in principle does support sampling
from the clients native format, this conversion will be a performance
advantage if it allows to convert to the servers preferred format
for direct scanout, as the Wayland compositor may then be able to
directly page-flip a fullscreen client wl_buffer onto the primary
plane, or onto a hardware overlay plane, avoiding an extra data copy
for desktop composition.
Tested so far under Weston with: nouveau single-gpu, Intel single-gpu,
AMD single-gpu, "Optimus" Intel server iGPU for display + NVidia
client dGPU for rendering.
v2: Implement minor review comments by Eric Engestrom: Add some
comment and assert, and some style fixes for clarity.
No functional change.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Surface reads don't need them because they just have the one address
payload. With surface writes, on the other hand, we can put the address
and the data in the different halves and avoid building the payload all
together.
The decrease in register pressure and added freedom in register
allocation resulting from this change reduces spilling enough to improve
the performance of one customer benchmark by about 2x.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
We're about to add some more if cases so let's have the giant re-indent
in it's own patch to make review easier.
Acked-by: Iago Toral Quiroga <itoral@igalia.com>
These have clearly never seen any use.... On gen8, the bottom 4 bits are
missing so we need to shift them off before we call set_bits and shift
again when we get the bits. Found by inspection.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Instead of fetching the information out of the instruction directly,
fetch the descriptor and then pluck the information out of the
descriptor. The current scheme works ok for SEND but with SENDS, it all
falls to pieces because the descriptor is completely shuffled around.
This commit doesn't actually convert everything. One notable exception
is URB messages which don't even use descriptors in emit_urb_WRITE yet.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
We want to be able to extract data from descriptors as well as unify a
bit of the descriptor construction.
One of the unifications we do is to unify the read/write and dataport
descriptors. On gen4-5, read/write are substantially different and the
read descriptors change between gen4 and gen4.x. On gen6, they unified
layouts between read, write, and dataport. Then, on gen8, they added
one bit to the message type field but left it reserved MBZ for
read/write messages. This commit chooses to treat that as if they
expanded the field everywhere and just didn't have enough enum values
for read/write to bother with the extra bit.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
This commit pulls the surface descriptor helpers out into brw_eu.h and
makes them no longer depend on the codegen infrastructure. This should
allow us to use them directly from the IR code instead of the generator.
This change is unfortunately less mechanical than perhaps one would like
but it should be fairly straightforward.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Instead of magically falling back to SIMD8 for atomics and typed
messages on Ivy Bridge, explicitly figure out the exec size and pass
that into brw_surface_payload_size.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Like all the other sends, it's just mlen * REG_SIZE.
Fixes: 3cbc02e469 "intel: Use TXS for image_size when we have..."
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
If you pass a bool in as the value to set, the C standard says that it
gets converted to an int prior to shifting. If you try to set a bool to
bit 31, this lands you in undefined behavior. It's better just to add
the explicit cast and let the compiler delete it for us.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
There are piles of fields that it doesn't check so using it is a lie.
The only reason why it's not causing problem is because it has exactly
one user which only uses it for MOV instructions (which aren't very
interesting) and only on Sandy Bridge and earlier hardware. Just get
rid of it and inline it in the one place that it's actually used.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Previously we tried to normalize nr_samples to MAX2(1, nr_samples) to
avoid having to deal with 0 vs 1 everywhere. But this causes problems
in mesa/st, for example st_finalize_texture() will think there is a
nr_samples mismatch and recreate the texture. Somehow this manifests
as corrupt x11 font rendering on generations that do not support MSAA
(but apparently works fine on a5xx and a6xx which do support MSAA.)
Fixes: cf0c7258ee freedreno/a5xx: MSAA
Signed-off-by: Rob Clark <robdclark@gmail.com>
Switched to the raw bo list api to avoid having to use 2 arrays for
everything.
This was introduced in libdrm 2.4.97 which we already depend upon.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This has been disabled some months ago because it introduced
rendering issues with Shadow Of Warrier II (DXVK). This game is
no longer affected, I wonder if 824cfc1ee5 ("radv: rework the
TC-compat HTILE hardware bug with COND_EXEC") fixed the problem.
I checked The Forest on my Polaris, and it renders fine too.
According to Phillip, this gives +5.5% with Rise Of The Tomb
Raider and DXVK. This is because DXVK uses 16-bit depth surfaces
while the native port from Feral uses 32-bit depth surfaces.
Unfortunately, Shadow Of The Tomb Raider isn't affected because
it clears each layer of a D16 array texture individually. So it
doesn't hit the fast clear path.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The core Mesa with_asm_arch and USE_ARM_ASM flags are disabled for meson
cross-builds because of the need to run host binaries on the build system.
vc4 doesn't need to do that, so skip with_asm_arch to enable NEON on my
cross-builds.
Fixes: ebcb4c2156 ("meson: Enable VC4's NEON assembly support.")
Otherwise, the compiler is free to reuse the register containing the input
for another call and assume that the value hasn't been modified. Fixes
crashes on texture upload/download with current gcc.
We now have to have a temporary for the cpu2 value, since outputs must be
lvalues.
(commit message by anholt)
Fixes: 4d30024238 ("vc4: Use NEON to speed up utile loads on Pi2.")
This fixes the depth/stencil clear on a20x, and adds a fast clear path.
The fast clear path is only used for a20x, needs performance tests on a22x.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
This allows us to avoid expensive string compares since we already have
a map to the pointers.
These compares were taking ~30 seconds for a single shader compile
in Godot due to it using 64,000+ uniforms.
Fixes: c4cff5f402 ("glsl: add basic support for resource list to shader cache")
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109229
Enable using etnaviv for KMS renderonly. This still needs KMS driver
name mapping to kmsro to be used automatically.
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Rob Herring <robh@kernel.org>
This allows vc4 to initialize on the Adafruit PiTFT 3.5" touchscreen with
the hx8357d tinydrm driver
v2: Whitespace fix noted by Eric Engestrom, update commit message for the
driver being merged.
v3: Rebase on Rob Herring's pipe-loader changes.
Acked-by: Eric Engestrom <eric.engestrom@intel.com> (v1)
Acked-by: Emil Velikov <emil.velikov@collabora.com> (v1)
If we can't find a driver matching by name, then use the kmsro driver.
This removes the need for needing a driver descriptor for every possible
KMS driver.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Eric Anholt <eric@anholt.net>
The vc4 driver can do prime sharing to many different KMS-only devices,
such as the various tinydrm drivers for SPI-attached displays. Rename the
driver away from "pl111" to represent what it will actually support:
various sorts of KMS displays with the renderonly layer used to attach a
GPU.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Instead of using this useless array_params_mask variable.
This should set these two attributes to streamout buffers too.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Use EXT_framebuffer_sRGB to expose EXT_sRGB_write_control on GLES. Remove
the checks for desktion GL in the enable calls, since EXT_framebuffer_sRGB
now also indicates support for switching the linear-sRGB color
space conversion on GLES.
Thanks to Ilia Mirkin for all the helpful discussions that helped to rework
this series.
v2: Fix alphabetical listing of extensions (Tapani Pälli)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com> (v1)
GLES 3.0 does not actually require support for EXT_framebuffer_sRGB, it
only needs support for sRGB attachments to framebuffers and framebuffer
objects as defined in ARB_framebuffer_objects.
v2: Clarify that ARB_framebuffer_objects is needed.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
All drivers that support EXT_framebuffer_sRGB also support EXT_sRGB, but
in order to keep this commit minial, and not to break any drivers both
flags are checked.
v2: - Use only EXT_sRGB (Ilia Mirkin)
- Move adding the flag EXT_sRGB to gl_extensions to a separate patch
v3: use _mesa_has_EXT_framebuffer_sRGB instead of extension flag
The _mesa_has function also checks for the correct versions and
should be preferred over using the flags directly (Erik)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
For GLES sRGB framebuffer attachemnt support is provided in two steps:
sRGB attachments like described in EXT_sRGB (and GLES 3.0) that enable
linear to sRGB color space transformation automatically, and the ability
to switch formats of the render target surface between sRGB and linear
that introduces full support for EXT_framebuffer_sRGB.
Set the according flags to reflect these two levels of sRGB support.
As a difference between desktopm GL and GLES, on desktop GL for a sRGB
framebuffer attachment the linear-sRGB conversion is turned off by default,
and for GLES it is turned on. This needs to be taken into account when
initally creating a surface, i.e. on desktop GL creation of a sRGB surface
is preferred, but on GLES sRGB surfaces are only created when explicitely
requested.
v2: - Use the new CAPS name
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
EXT_sRGB is an (incomplete) GLES extension that provides support for sRGB
framebuffer attachments, hence it can be used to check for this support
as an alternative to EXT_framebuffer_sRGB that provies the same
functionality but also sRGB write control support.
However, since EXT_sRGB is incomplete and superseted by GLES 3.0 it will
not be exposed as an extension.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
v2: - Use the renamed CAPS
- add assetions to make sure that mesa doesn't try to switch
destination surface formats when it is not supported. (Ilia Mirkin)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Add a new cap that indicates whether the drivers supports
enabling/disabling the conversion from linear space to sRGB
for a framebuffer attachment. In Driver terms that this CAP indicates
whether the driver can switcht between a linear and and a sRGB surface
format for draw destinations witout changing the sourface itself.
v2: rename CAP to DEST_SURFACE_SRGB_CONTROL to reflect its
purpouse better (pointed out by Ilia Mirkin)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Under Vulkan, the double vertex attributes take up the same size
regardless of whether they are vertex inputs or any other stage
interface.
Under OpenGL (ARB_gl_spirv), from GLSL 4.60 spec, section 4.3.9
Interface Blocks:
"It is a compile-time error to have an input block in a vertex
shader or an output block in a fragment shader. These uses are
reserved for future use."
So we also don't need to check if it is an vertex input or not, and
use false in any case.
v2: (changes made by Alejandro Piñeiro)
* Update required after "spirv: Handle location decorations on
block interface members" own updates (original patch was sent
several months ago)
* After Neil suggesting it, confirm that this change can be also
done for OpenGL (ARB_gl_spirv). Expand commit message.
v3: update after changing name of main method on a previous patch
Signed-off-by: Neil Roberts <nroberts@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
glsl_count_attribute_slots takes a parameter to specify whether the
type is being used as a vertex input because on GL double attributes
only take up one slot. Vulkan doesn’t make this distinction so this
patch renames the argument to is_gl_vertex_input in order to make it
more clear that it should always be false on Vulkan.
v2: minor variable renaming (s/member/member_type) (Tapani)
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Previously the code was taking any location decoration on the block
and using that to calculate the member locations for all of the
members. I think this was assuming that there would only be one
location decoration for the entire block. According to the Vulkan spec
it is possible to add location decorations to individual members:
“If the structure type is a Block but without a Location, then each
of its members must have a Location decoration. If it is a Block
with a Location decoration, then its members are assigned
consecutive locations in declaration order, starting from the
first member which is initially the Block. Any member with its own
Location decoration is assigned that location. Each remaining
member is assigned the location after the immediately preceding
member in declaration order.”
This patch makes it instead keep track of which members have been
assigned an explicit location. It also has a space to store the
location for the struct as a whole. Once all the decorations have been
processed it iterates over each member to fill in the missing
locations using the rules described above.
So, this commit is needed to get working a case like this, on both
Vulkan and OpenGL using SPIR-V (ARB_gl_spirv):
out block {
layout(location = 2) vec4 c;
layout(location = 3) vec4 d;
layout(location = 0) vec4 a;
layout(location = 1) vec4 b;
} name;
v2: (changes made by Alejandro Piñeiro)
* Update after introducing struct member splitting (See commit b0c643d)
* Update after only exposing interface_type for blocks, not to any struct
* Update after last changes done for xfb support
v3: use "assign" instead of "add" on the new method added (Tapani)
Signed-off-by: Neil Roberts <nroberts@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Defines how sampler (and pixel pipes) needs to access the data
represented with a resource. The used default is mode is
ETNA_ADDRESSING_MODE_TILED.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
The text segment is shared among multiple contexts, while each one has
its own bufctx. So when reallocating the text segment, some contexts may
end up with stale values in their bufctx's. Instead limit the exposure
to the bufctx to within a single draw.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
The sampler border color is encoded in the TMU's blending format (half
floats, 32-bit floats, or integers) and must be clamped to the format's
range unorm/snorm/int ranges by the driver. Additionally, the TMU doesn't
know about how we're abusing the swizzle to support BGRA, A, and LA, so we
have to pre-swizzle the border color for those.
We don't really want to spend half a kb on sampler states in most cases,
so skip generating the variants when the border color is unused or is
0,0,0,0.
When the sampler view is in sample-stencil mode, we need to return uint
stencil values. To do that, fill in the format table to return R8I, and
have the sampler view point at the separate stencil buffer.
Fixes dEQP-GLES31.functional.stencil_texturing.format.depth32f_stencil8_2d
Fixes OOMs in the CTS's packed_pixels.varied_rectangle.* tests -- the
series of texture uploads at the start before texturing occurred would end
up all sitting around as cached jobs for reuse. By flushing immediately,
peak active BO usage goes from 150M to 40M.
We could maybe put some limits on how many jobs we keep around, but blits
seem particularly unlikely to get reused for other drawing.
This is the GLES 3.2 minmax, and also what the closed source driver does.
Avoids hitting OOMs in the CTS's
dEQP-GLES3.functional.texture.units.all_units.only_cube.1.
From the vulkan spec 33.3 "Extension Dependencies":
"Any device extension that has an instance extension dependency that is
not enabled by vkCreateInstance is considered to be unsupported, hence
it must not be returned by vkEnumerateDeviceExtensionProperties for any
VkPhysicalDevice child of the instance."
Therefore we need to check whether the instance-level extensions are
actually enabled when deciding to support a device-level extension or
not.
Furthermore, we need to do this for all instance-level extensions of any
(transitive) device-level extension dependency, due to the following
paragraph:
"If an extension is supported (as queried by
vkEnumerateInstanceExtensionProperties or
vkEnumerateDeviceExtensionProperties), then required extensions of that
extension must also be supported for the same instance or physical
device."
Finally, because some of these vulkan extensions may be implicitly
promoted to future vulkan core API versions, we can also satisfy the
dependency if the vulkan API version is high enough.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
From the vulkan spec 3.2 "Instances":
"Providing a NULL VkInstanceCreateInfo::pApplicationInfo or providing an
apiVersion of 0 is equivalent to providing an apiVersion of
VK_MAKE_VERSION(1,0,0)."
Fixes: ffa15861ef "radv: UseEnumerateInstanceVersion for the default version."
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Section 7.6.2.2 (Standard Uniform Block Layout) of the GL spec says:
The base offset of the first member of a structure is taken from the
aligned offset of the structure itself. The base offset of all other
structure members is derived by taking the offset of the last basic
machine unit consumed by the previous member and adding one.
The current code does not reflect this last sentence - it effectively
instead aligns up the next offset up to the alignment of the previous
member. This causes an issue in exactly one case:
layout(std140) uniform block {
layout(offset=0) vec3 var1;
layout(offset=12) float var2;
};
As per section 7.6.2.1 (Uniform Buffer Object Storage) and elsewhere, a
vec3 consumes 3 floats, i.e. 12 basic machine units. Therefore, `var1`
in the example above consumes units 0-11, with 12 being the first
available offset afterwards. However, before this commit, mesa
incorrectly assumes `var2` must start at offset=16 when using explicit
offsets, which results in a compile-time error. Without explicit
offsets, the shaders actually work fine, indicating that mesa is already
correctly aligning these fields internally. (Just not in the code that
handles explicit buffer offset parsing)
This patch should fix piglit tests:
ssbo-explicit-offset-vec3.vert
ubo-explicit-offset-vec3.vert
Signed-off-by: Niklas Haas <git@haasn.xyz>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
This only implements the actual opcodes and does not implement support
for using them with specialization constants.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
We handle forward declarations by creating the pointer type with it's
storage type based on storage class and just waiting to fill out the
actual deref type until we get the OpTypePointer. Because any
composites using the forward declared type only care about the storage
type (i.e. uint64_t, uvec2, etc.) when creating their glsl_type, this
works fine and we can defer the actual deref_type as far as we need.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
This was valid back when the only valid types of pointers were uint32
and uvec2. Now that we're allowing more variety, it could be just about
anything so we'll just drop the assert.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
These correspond roughly to reading/writing OpenCL global pointers. The
idea is that they just take a bare address and load/store from it. Of
course, exactly what this address means is driver-dependent.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
We want to have debug info as well if using
meson's debugoptimized when ndebug is off.
v2: use u_debug functions that do something
even if DEBUG is not set.
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
Fixes regression caused by
42d672fa6a
st/nine: Bind src not dst in nine_context_box_upload
Before that patch, for user provided textures,
when the texture was destroyed, the safety
check for pending uploads, which according to
the code "Following condition cannot happen currently",
was flushing the queue and thus triggering the upload.
After the patch, the texture destruction was delayed after
the upload. However the user frees the texture buffer,
as it thinks the texture released.
Instead of reverting the faulty patch,
this patch instead flushes the csmt queue right away
after queuing the upload for this type of textures.
This is more future-proof, as we may want to bind the
surface for other reasons in the future.
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
Cc: 18.3 <mesa-stable@lists.freedesktop.org>
Compilation of user-specified shaders with software fp64 works by
compiling on demand an "fp64-funcs" shader implementing various fp64
operations and then linking it into the "user shader".
In
commit 64b8c86d37
Author: Timothy Arceri <tarceri@itsqueeze.com>
Date: Thu Jan 17 17:16:29 2019 +1100
glsl: be much more aggressive when skipping shader compilation
we changed the behavior of the shader cache to skip compilation earlier
when we get a cache hit.
After the aforementioned commit, compiling a user program using fp64
would store into the cache an entry for the fp64-funcs shader.
Subsequent compilations of uncached user shaders using fp64 would fail
in compile_fp64_funcs() after finding a cache entry for the fp64-funcs,
but being unprepared to read from the cache.
It's unclear to me how to retrieve the cached NIR of the fp64-funcs (if
it even is cached), so just call _mesa_glsl_compile_shader() with
force_recompile=true in order to ensure we generate the fp64-funcs
successfully.
Tested-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This allows creating a fd_screen with a renderonly object which will be
used to allocated scanout resources.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Eric Anholt <eric@anholt.net>
[slight tweak to fix uninitialized 'prsc' in debug print]
Signed-off-by: Rob Clark <robdclark@gmail.com>
Fixes the following piglit test on my VEGA and matches the behaviour in the
tgsi backend.
tests/spec/glsl-1.10/execution/samplers/glsl-fs-shadow2D-clamp-z.shader_test
Fixes: 625dcbbc45 ("amd/common: pass address components individually to ac_build_image_intrinsic")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The util helpers were looking for a non-void channels in a non-mixed
format and returning its snorm/unorm state. However, compressed formats
don't have non-void channels, so they always returned false. V3D wants to
use util_format_is_[su]norm for its border color clamping workarounds, so
fix the functions to return the right answer for these.
This now means that we ignore .is_mixed. I could retain the is_mixed
check, but it doesn't seem like a useful feature -- the only code I could
find that might care is freedreno's blit, which has some notes about how
things are wonky in this area anyway.
Reviewed-by: <Roland Scheidegger sroland@vmware.com>
These tests don't need swrast, so we can always enable them when
build_tests is set. Most of them run to successful completion quickly
(.9s on my SKL).
Reviewed-by: <Roland Scheidegger sroland@vmware.com>
Earlier commit aimed to remove unneeded function declarations. Namely
OpenGL entrypoints which are not applicable for OpenGLES*
Although it did not consider the shared glapi which needs all,
including hidden ones. Resulting in warning/errors like the following
../build/src/mapi/shared-glapi/glapi_mapi_tmp.h:26014:15:
error: no previous prototype for ‘shared_dispatch_stub_1414’ [-Werror=missing-prototypes]
This patch addressed that.
Cc: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reported-by: Eric Anholt <eric@anholt.net>
Fixes: 6148cce388 ("mapi: drop unneeded gl_dispatch_stub declarations")
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Eric Anholt <eric@anholt.net>
1ce5d757d0 dropped this limit.. which is probably the right thing to
do. But it results in an extra tiled->linear blit for glReadPixels()
(ie. dEQP/piglit) which is hitting some intermittent corruption (looks
like cache) on a6xx, causing a lot of spurious fails.
Since we are getting close to 19.0 branchpoint, re-instate this limit
for now, until the blitter problems are resolved.
Fixes: 1ce5d757d0 freedreno: core buffer modifier support
Signed-off-by: Rob Clark <robdclark@gmail.com>
This reverts commits 00ad77b9f6 and
5334dafee2.
This avoids Appveyor build breakage due to Cygwin, but more importantly,
there are several problems with these patches, as highlighted to my
recent mesa-dev mail. So better to revert for now, and pursue Cygwin
support after these have been address.
It should be incremented by one according to
how it is calculated by 'emit_vertex_buffer_state':
"\#if GEN_GEN < 8
.BufferAccessType = step_rate ? INSTANCEDATA : VERTEXDATA,
.InstanceDataStepRate = step_rate,
\#if GEN_GEN >= 5
.EndAddress = ro_bo(bo, end_offset - 1),
\#endif
\#endif"
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109449
Signed-off-by: Andrii Simiklit <andrii.simiklit@globallogic.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This mirrors what autotools does in src/gallium/state_trackers/vdpau/Makefile.am
and src/gallium/targets/vdpau/Makefile.am:
VDPAU_MAJOR = 1
VDPAU_MINOR = 0
libvdpau_gallium_la_LDFLAGS = -version-number $(VDPAU_MAJOR):$(VDPAU_MINOR)
Reported-by: Igor Gnatenko <i.gnatenko.brain@gmail.com>
Fixes: 68076b8747 "meson: build gallium vdpau state tracker"
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Accessing bo->map and then pool->center_bo_offset without a lock is
racy. One way of avoiding such race condition is to store the bo->map +
center_bo_offset into pool->map at the time the block pool is growing,
which happens within a lock.
v2: Only set pool->map if not using softpin (Jason).
v3: Move things around and only update center_bo_offset if not using
softpin too (Jason).
Cc: Jason Ekstrand <jason@jlekstrand.net>
Reported-by: Ian Romanick <idr@freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109442
Fixes: fc3f588320
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
ICC tries to be helpful by not erroring when it sees something that it
doesn't understand, which is completely the opposite of helpful. Meson
0.49.0 does much better at handling this by really trying to make ICC
error, but there are some things in mesa that still get ignored until
0.49.1
v2: - Fix id check, which is 'intel' not 'icc'
Cc: 18.3 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com> (v1)
This is a bit fragile, as the way this "fixes" the check is to move the
one that we know is correct before the one that is incorrectly reported
as working. In meson 0.49.1 (which isn't out yet) this is fixed that the
incorrect check is reported as a failure.
Fixes: e0b037d697
("meson: Build SWR driver")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109129
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
LLVM uses the single instruction "FRINTI" to implement llvm.nearbyint.
Fixes the rounding tests of lp_test_arit.
Bug: https://bugs.gentoo.org/665570
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
NEON (now called ASIMD) is available on all aarch64 CPUs. Our code was
missing an aarch64 path, leading to util_cpu_caps.has_neon always being
false on aarch64.
Reviewed-by: Eric Anholt <eric@anholt.net>
This fixes the drisw paths to use the new shm2 interface, so that
we don't trigger the X server overflow checks when the x offset is non-zero.
This just hides the versioning in drisw, and either passes the src_x
or adds the offset fixup for the fallback path.
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This adds a new interface to the swrast interface to fix an shm put image bug.
The current code adds the x,y src offsets into the offset parameters,
however if the x offset is > 0, and the put image copies up to the height
of the image, this can trigger an X server validation check to fail and
the renderering to get BadMatch.
This patch fixes it to pass the x offset coord in as a src x.
We cannot pass the Y coordinate due to the horrible code mangling the
image w/h vs stride in swrastXPutImage.
v2: drop srcx,y from api
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
With the previous scripts API from the following was incorrectly
exported. Drop them from the list, since they're no longer around.
GL_EXT_blend_func_extended
GL_EXT_texture_integer
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Now we use the upstream XML file and a cleaner generator. Thus the
symbols are no longer exported and we can drop them from this list.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
As some point in the past we fixed the scripts so, these are no longer
exported. Drop them from the list.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
This reverts commit a1f5d9412cf7cacb3534635f6c2409fafbe6574e.
We no longer needed to sort - it was meant only to ease compare against
the old generated files.
The output produced functionally identical, with the following changes:
- A cosmetic: swapped ABI compatible types [ GLclampf -> GLfloat, etc ]
- B cosmetic: renamed parameters [ zNear -> n, etc ]
- C dropped extension entrypoints - invalid/incorrect
To make things easier to validate, normalise both old/new headers run
the sed patterns A, B and C to both sets.
A
s/\<GLclampf\>/GLfloat/g; s/\<GLclampx\>/GLfixed/g;
s/\<GLvoid\>/void/g;
B
s/\ \* / */g; s/\<texture\>/target/g;
s/\<plane\>/p/g; s/\<depth\>/d/g; s/\<modeAlpha\>/modeA/g;
s/\<shader\>/program/g; s/\<obj\>/shaders/g; s/\<equation\>/eqn/g;
s/\<param\>/data/g; s/\<params\>/data/g; s/\<buffers\>/buffer/g;
s/\<src\>/mode/g; s/\<count\>/n/g; s/\<zNear\>/n/g; s/\<zFar\>/f/g;
s/\<zfail\>/dpfail/g; s/\<zpass\>/dppass/g; s/\<buf\>/index/g;
s/\<value\>/target/g; s/\<cap\>/target/g; s/\<maskNumber\>/index/g;
s/\<srcRGB\>/sfactorRGB/g; s/\<dstRGB\>/dfactorRGB/g;
s/\<srcAlpha\>/sfactorAlpha/g; s/\<dstAlpha\>/dfactorAlpha/g;
s/\<primitiveMode\>/mode/g; s/\<primcount\>/instancecount/g;
s/\<top\>/t/g; s/\<bottom\>/b/g; s/\<left\>/l/g; s/\<right\>/r/g;
s/\<x\>/v0/g; s/\<y\>/v1/g; s/\<z\>/v2/g; s/\<w\>/v3/g;
s/\<sfactor\>/mode/g; s/\<dfactor\>/dst/g; s/\<attribindex\>/bindingindex/g;
s/\<internalFormat\>/internalformat/g; s/\<bufSize\>/bufsize/g;
C
glMultiDrawArraysEXT
glMultiDrawElementsEXT
glBindFragDataLocationEXT
glGetTexParameterIivEXT
glGetTexParameterIuivEXT
glTexParameterIivEXT
glTexParameterIuivEXT
v2:
- gl_dispatch_stub declarations are addressed with previous patch
- the public_entries table is no longer generated
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
We already do it a few lines above - drop the duplicate.
Note that for consistency sake, we keep the substitution since the GL
API is a mixed bad - some use GLvoid while others a normal void.
We might want to merge this back in GLVND.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
This way we can reuse the latter, which is already present in the
headers that we use. Thus we can drop the manual typedef we generate.
We might want to merge this back in GLVND.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
There is no need for the noop functions, the public_stubs and
public_entries table or table size defines. Remove those.
Pretty much all of this is applicable to GLVND, although it
requires preparatory work.
v2:
- python style fixes (Dylan)
- use "gldispatch" instead of not "glesv1" "glesv2"
- remove the public_entries table/array (Erik)
v3:
- use if == "gldispatch", instead of "in" (Kyle)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com> (v2)
The only instance that requires the public_entries table is the
dispatch library - split that into another function.
We have to be careful with when undefining the guard, so split it out.
We might want to merge this back in GLVND.
Minor GLVND cleanup will be needed first.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Strictly speaking we can rework the rest of the code so we do not need
those. That said, this will require a series on it's own so let's carry
this local quirk for now.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Otherwise the incorrect ones will be used, effectively breaking the ABI.
Note: some entries in static_data.py list a suffixed API, while (for ES*
at least) we expect the one w/o suffix.
v2:
- rework path handling (Dylan)
- use else if chain (Erik)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Currently we have over 20 scripts that generate the libGL* dispatch and
various other functionality. More importantly we're using local XML
files instead of the Khronos provides one(s). Resulting in an
increasing complexity of writing, maintaining and bugfixing.
One fairly annoying bug is handling of statically exported symbols.
Today, if we enable a GL extension for GLES1/2, we add a special tag to
the xml. Thus the ES dispatch gets generated, but also since we have no
separate notion of GL/ES1/ES2 static functions it also gets exported
statically.
This commit adds step one towards clearing and simplifying our setup.
It imports the mapi generator from GLVND.
012fe39 ("Remove a couple of duplicate typedefs.")
v2: use local genCommon.py
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
The helper will also be used by the new Khronos gl.xml aware generator.
v2: Move existing one, instead of duplicating it.
v3: Correct genCommon.py references in meson [Erik]
v4: Drop the file from the EGL EXTRA_DIST [Erik]
Suggested-by: Kyle Brenneman <kbrenneman@nvidia.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Currently various parts of mesa use the glapi_table differently.
Some use _glapi_get_proc_offset() to get the offset, while others
directly reference the specific offset via _gloffset_Function.
Add all static entries, to ensure things don't break as we flip to the
upstream XML + new mapi generator.
Note: the offsets are also used for the alias remap table, thus we need
to ensure we honour the correct offsets range or it will break.
Currently this is done via MAX_OFFSETS constant, although a better
solution is in the works.
v2: add FramebufferTexture2DMultisampleEXT
v3: add MAX_OFFSETS guard
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com> (v1)
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
This reverts commit f1998e15ff.
This changes the ABI, such that glGetnTexImageARB entry-point from the
GLAPI gets removed. Thus accessing many functions by offset (as we do)
will result in getting the wrong one.
Follow-up work will swap the by-offset handling, but for now revert
this patch.
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
These declarations are not used anywhere - be that generated code or
otherwise.
[Emil: format the hunk from Erik into a patch]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
With Windows in mind, using forward slash isn't the right thing to do.
Even if it just works, we might want to fix it.
As here, use __file__ instead of argv[0] and sys.path.insert over
sys.path.append. With the path tweak being reportedly faster.
Suggested-by: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Cheating a tiny bit as these headers aren't in the Khronos repo yet, but
I expect them to be within a couple days.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
emit_uniformize() emits SHADER_OPCODE_FIND_LIVE_CHANNEL with its
flag_subreg set, so that the IR knows which flag is accessed. However
the flag is only used on Gen7 in Align1 mode.
To avoid setting unnecessary bits in the instruction words, get the
information we need and reset the default flag register. This allows
round-tripping through the assembler/disassembler.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
This reverts commit ff621a5055.
with default warnings configuration, this commit generates:
../src/egl/main/eglapi.c:2654:1: error: no previous prototype for
‘eglGetDisplayDriverConfig’ [-Werror=missing-prototypes]
When this functionality was added, the PRIMITIVES_GENERATED query was
accidentally omitted. This causes issues for drivers that support
transform feedback."
Fixes: d644698b44 ("gallium: Add the ability to query a single
pipeline statistics counter")
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Sending MRs from the main Mesa repository increase clutter in the
repository, and decrease visibility of project-wide branches. So it's
better if MRs are sent from forks instead.
Let's add a note about this, in case its not obvious to everyone.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Fixes an assert we start hitting with kms/gbm:
#0 0x0000007fbf3d6e3c in raise () from /lib64/libc.so.6
#1 0x0000007fbf3c4a68 in abort () from /lib64/libc.so.6
#2 0x0000007fbf3d04e8 in __assert_fail_base () from /lib64/libc.so.6
#3 0x0000007fbf3d0550 in __assert_fail () from /lib64/libc.so.6
#4 0x0000007fbf5a73c4 in gbm_dri_bo_create (gbm=0x5820f0, width=2160, height=1440, format=875713112, usage=0, modifiers=0x695e00, count=1) at ../src/gbm/backends/dri/gbm_dri.c:1150
#5 0x0000007fbf5a49c4 in gbm_bo_create_with_modifiers (gbm=0x5820f0, width=2160, height=1440, format=875713112, modifiers=0x695e00, count=1) at ../src/gbm/main/gbm.c:491
#6 0x0000007fbbac3d64 in get_back_bo (dri2_surf=0x6f4cc0) at ../src/egl/drivers/dri2/platform_drm.c:258
#7 0x0000007fbbac4318 in dri2_drm_image_get_buffers (driDrawable=0x704490, format=4098, stamp=0x6fc730, loaderPrivate=0x6f4cc0, buffer_mask=1, buffers=0x7fffffe210) at ../src/egl/drivers/dri2/platform_drm.c:409
#8 0x0000007fbf5a5318 in image_get_buffers (driDrawable=0x704490, format=4098, stamp=0x6fc730, loaderPrivate=0x70e150, buffer_mask=1, buffers=0x7fffffe210) at ../src/gbm/backends/dri/gbm_dri.c:135
#9 0x0000007fbe4308c4 in dri_image_drawable_get_buffers (drawable=0x6fc730, images=0x7fffffe210, statts=0x6f2660, statts_count=1) at ../src/gallium/state_trackers/dri/dri2.c:339
#10 0x0000007fbe430c44 in dri2_allocate_textures (ctx=0x614b30, drawable=0x6fc730, statts=0x6f2660, statts_count=1) at ../src/gallium/state_trackers/dri/dri2.c:466
#11 0x0000007fbe435580 in dri_st_framebuffer_validate (stctx=0x714160, stfbi=0x6fc730, statts=0x6f2660, count=1, out=0x7fffffe3b8) at ../src/gallium/state_trackers/dri/dri_drawable.c:85
#12 0x0000007fbe7b2c84 in st_framebuffer_validate (stfb=0x6f2190, st=0x714160) at ../src/mesa/state_tracker/st_manager.c:222
#13 0x0000007fbe7b4884 in st_api_make_current (stapi=0x7fbf0430d8 <st_gl_api>, stctxi=0x714160, stdrawi=0x6fc730, streadi=0x6fc730) at ../src/mesa/state_tracker/st_manager.c:1074
#14 0x0000007fbe434f44 in dri_make_current (cPriv=0x703c20, driDrawPriv=0x704490, driReadPriv=0x704490) at ../src/gallium/state_trackers/dri/dri_context.c:301
#15 0x0000007fbe42c910 in driBindContext (pcp=0x703c20, pdp=0x704490, prp=0x704490) at ../src/mesa/drivers/dri/common/dri_util.c:579
#16 0x0000007fbbabab40 in dri2_make_current (drv=0x69d170, disp=0x69c6e0, dsurf=0x6f4cc0, rsurf=0x6f4cc0, ctx=0x70cb40) at ../src/egl/drivers/dri2/egl_dri2.c:1456
#17 0x0000007fbbaa8ef4 in eglMakeCurrent (dpy=0x69c6e0, draw=0x6f4cc0, read=0x6f4cc0, ctx=0x70cb40) at ../src/egl/main/eglapi.c:862
#18 0x0000007fbf5736ac in InternalMakeCurrentVendor (dpy=dpy@entry=0x614fb0, draw=draw@entry=0x6f4cc0, read=read@entry=0x6f4cc0, context=context@entry=0x70cb40, apiState=apiState@entry=0x6fc940, vendor=0x6975f0) at libegl.c:861
#19 0x0000007fbf573764 in InternalMakeCurrentDispatch (dpy=0x614fb0, draw=0x6f4cc0, read=0x6f4cc0, context=0x70cb40, vendor=0x6975f0) at libegl.c:630
#20 0x0000000000403640 in init_egl (egl=0x5805a8 <gl>, gbm=0x580528 <gbm>, samples=0) at ../common.c:263
#21 0x0000000000403c1c in init_cube_smooth (gbm=0x580528 <gbm>, samples=0) at ../cube-smooth.c:225
#22 0x0000000000408618 in main (argc=1, argv=0x7fffffe8d8) at ../kmscube.c:145
Fixes: 1ce5d757d0 freedreno: core buffer modifier support
Signed-off-by: Rob Clark <robdclark@gmail.com>
It's invalid to emit a ZPASS_DONE event on the compute queue, and
the fence BO is unused on the compute queue (ie. we don't flush
CB or DB caches).
This saves some space in the upload BO.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This parameter is actually useless as the immediate value
can always be zero.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
For example, if a pipeline has two stages VS and FS. And if only
the fragment stage needs dynamic bindings, we shouldn't allocate
an extra user SGPR for the vertex stage. Of course, if the vertex
stage loads constants, it needs an user SGPR.
This should reduce the number of SET_SH_REG packets that are emitted.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
In the Intel backend, it makes the most sense to treat gl_TessLevelInner
and gl_TessLevelOuter as ordinary shader inputs. For Radeon, it makes
more sense to treat them as system values which get special handling.
We already have a compiler option for this, but the Iris driver will
need a capability bit so we can set it appropriately.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
We may have to flush the cache if there are any textures presently bound
that refer to the outgoing framebuffer. This is only checked at
validation time.
Fixes a number of dEQP-GLES3.functional.fbo.color.repeated_clear.sample.*
tests, which would bind a texture, then clear it while the binding was
in effect, and then render to a different texture. This seems legal
under the "no feedback loops" rule.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Normally modifiers take precendence over use flags, as they are more
explicit. But if the driver supports modifiers, but the xserver does
not, then we should fallback to the old mechanism of allocating a buffer
using 'use' flags.
Fixes: 069fdd5f9f
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@chromium.org>
Fixes a static assertion which broke the build.
Fixes: 3ee240890 "gallium: add SINT formats to have exact counterparts to SNORM formats"
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Neha Bhende<bhenden@vmware.com>
Annoyingly, this requires that we implement integer division on the
command streamer. Fortunately, we're only ever dividing by constants so
we can use the mulh+add+shift trick and it's not as bad as it sounds.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
In order to allow nir_gather_xfb_info to be used on OpenGL,
specifically ARB_gl_spirv.
So, from OpenGL 4.6 spec, section 11.1.2.1, "Output Variables":
"outputs specifying both an *XfbBuffer* and an *Offset* are
captured, while outputs not specifying both of these are not
captured. Values are captured each time the shader writes to such
a decorated object."
This implies that are captured if both are present, and not if one of
those are lacking. Technically, it doesn't explicitly point that
having just one or the other is a mistake. In some cases, glslang is
adding some extra XfbBuffer without XfbOffset around, and mentioning
that technically that is not a bug (see issue#1526)
And for the case of Vulkan, as the same glslang issue mentions, it is
not clear if that should be a mistake or not. But even if it is a
mistake, it is not really needed to be checked on the driver, and we
can let the validation layers to check that.
v2: simplify explicit_xfb_buffer and explicit_offset checks (Jason).
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Before, we were double-counting the component slots when we had a dvec3
or dvec4. Instead, just add them in once and manually offset the
recorded output offset.
Fixes: 19064b8c "nir: Add a pass for gathering transform feedback info"
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
If we have a transform feedback output like:
float[2] x2_out (VARYING_SLOT_VAR1.x, 0, 0)
which is lowered by nir_lower_io_arrays_to_elements to,
float x2_out (VARYING_SLOT_VAR1.x, 0, 0)
float x2_out@5 (VARYING_SLOT_VAR2.x, 0, 0)
We have to update the destination offset to avoid overwriting
the same value.
v2 (Jason Ekstrand):
- Compute the correct offsets for arrays of vectors and/or doubles
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
When a xfb buffer is explicitely declared on a varying
variable, we shouldn't remove it at link time.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Instead of setting interface_type to whatever the per-vertex type is, we
only set it on blocks. This allows later passes to tell the difference
between variables that are in blocks and those that aren't.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Instead of splitting every per-vertex struct, just split the ones that
are actually blocks. The reason for the split is so that we have
separate variables for separate locations, qualifiers, and builtin
decorations. The vulkan spec only allows these on members of blocks.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
This seems to make the simulator happier. The early return wasn't
really protecting anything and the code that follows will happily
initialize the dummy element to STORE_0 and emit it.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Issue was hit with this configuration:
--disable-{egl,gbm} --with-platform=drm
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Fixes: 3208fd2e46 ("configure: move platform handling further up")
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Two cases:
* replacing srcs which refer to MOV instructions
* replacing MOVs used to write to exports
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
If we want to use a scalar instruction with two sources, both sources have
to be in the same register. This covers a common case by inserting a scalar
MOV into a previous instruction with only a vector alu instruction.
A better method would be to have the sources end up in the same register in
the first place, but when one source is a constant this is the only way.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
This patch replaces the a2xx TGSI compiler with a NIR compiler.
It also adds several new features:
-gl_FrontFacing, gl_FragCoord, gl_PointCoord, gl_PointSize
-control flow (including loops)
-texture related features (LOD/bias, cubemaps)
-filling scalar ALU slot when possible
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Take away const qualifier from return type of these functions as
-Wignored-qualifiers points out it is ignored for these cases.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
vtn supports these, so don't squalk if user is happy with enabling
these.
v2: add new members sorted
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Both the Intel and RADV people have been really bad about adding things
to the release notes. We should start actually paying attention.
Acked-by: Tapani Pälli <tapani.palli@intel.com>
It's common in some applications to bind a new graphics pipeline without
ending up changing any context registers.
This has a pipline have two command buffers: one for setting context
registers and one for everything else. The context register command buffer
is only emitted if it differs from the previous pipeline's.
v2: ensure late scissor emission is done when radv_emit_rbplus_state() is
called
v2: make use of cmd_buffer->state.workaround_scissor_bug
v3: rename "workaround_scissor_bug" to
"context_roll_without_scissor_emitted"
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
On a20x, set VGT_VERTEX_REUSE_BLOCK_CNTL to 2 and don't change it. Small
rearrangement on a220 to reduce the size of draw commands.
Only set DEALLOC_CNTL on a20x because the correct a220 value is not known.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Fixes cases where previous viewport values might case gmem2mem to fail.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Doesn't change much, but reduces the size of fd2_emit_state
gmem2mem does not need to change the value: no Z clipping on resolve
mem2gmem now needs to restore the common value after rendering
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Only 3 vertices are used so we can drop the data for vertex 4
It doesn't make sense to have 1.1 for some coordinates, use 1.0 instead
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Clark <robdclark@gmail.com>
v2: add assert to verify we have at least one valid bit_size
v3: fix use of load_front_face in nir_lower_two_sided_color and tgsi_to_nir
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
With OpenCL some system values match the address bits, but in GLSL we also
have some system values being 64 bit like subgroup masks.
With this it is possible to adjust the builder functions so that depending
on the bit_sizes the correct bit_size is used or an additional argument is
added in case of multiple possible values.
v2: validate dest bit_size
v3: generate hex values in python code
remove useless imports
rename and move bit_sizes
v4: add 1 to legal bit_sizes for front_face
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
fixes a couple of deqp tests (on nvc0 and potential other drivers):
dEQP-GLES3.functional.shaders.invariance.highp.common_subexpression_1
dEQP-GLES3.functional.shaders.invariance.highp.common_subexpression_2
dEQP-GLES3.functional.shaders.invariance.highp.common_subexpression_3
dEQP-GLES3.functional.shaders.invariance.mediump.common_subexpression_1
dEQP-GLES3.functional.shaders.invariance.mediump.common_subexpression_2
dEQP-GLES3.functional.shaders.invariance.mediump.common_subexpression_3
dEQP-GLES3.functional.shaders.invariance.lowp.common_subexpression_1
dEQP-GLES3.functional.shaders.invariance.lowp.common_subexpression_2
dEQP-GLES3.functional.shaders.invariance.lowp.common_subexpression_3
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
A little bit of explanation regarding how vkCmdPipelineBarrier()
works.
v2: Avoid referring to data port cache when it's actually sampler
caches (Jason)
Complete explanation for indirect draws (Jason)
v3: s/samplers/sampler/ (Jason)
s/UBOs/data port/
Add documentation for VK_ACCESS_CONDITIONAL_RENDERING_READ_BIT_EXT (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Eric Engestrom <eric.engestrom@intel.com> (v1)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> (v2)
In commit 9a7b319903 ("anv/query: flush render target before
copying results") we tracked all the render target writes to apply a
flushes in the vkCopyQueryResults(). But we can narrow this down to
only when we write a buffer (which is the only input of
vkCopyQueryResults).
v2: Drop newer render target write flags introduce by 1952fd8d2c
("anv: Implement VK_EXT_conditional_rendering for gen 7.5+")
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> (v1)
Currently we only add a cache key for a shader once it is linked.
However games like Team Fortress 2 compile a whole bunch of shaders
which are never actually linked. These compiled shaders can take
up a bunch of memory.
This patch changes things so that we add the key for the shader to
the cache as soon as it is compiled. This means on a warm cache we
can avoid the wasted memory from these shaders. Worst case scenario
is we need to compile the shaders at link time but this can happen
anyway if the shader has been evicted from the cache.
Reduces memory use in Team Fortress 2 from 1.3GB -> 770MB on a
warm cache from start up to the game menu.
V2: only add key to cache when compilation is successful.
Acked-by: Marek Olšák <marek.olsak@amd.com>
The docs are fairly incomplete and inconsistent about it, but this
seems to be the reason why half-float destinations are required to be
DWORD-aligned on BDW+ projects. This way the regioning lowering pass
will make sure that the destination components of W to HF and HF to W
conversions are aligned like the corresponding conversion operation
with 32-bit execution data type.
Tested-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This builds on the recent interpolate fix by Rhys ee8488ea3b.
This fixes the arb_gpu_shader5 interpolateAt* tests that contain
arrays.
Fixes: ee8488ea3b ("ac/nir,radv,radeonsi/nir: use correct indices for interpolation intrinsics")
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The color swap isn't available for tiled formats and it's not needed
either. We pick one channel order and use for all non-linear formats.
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Staging blit downloads would wait on the src resource instead of the
staging resource and didn't make sure to submit the blit batch first.
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Currently we only add a cache key for a shader once it is linked.
However games like Team Fortress 2 compile a whole bunch of shaders
which are never actually linked. These compiled shaders can take
up a bunch of memory.
This patch changes things so that we add the key for the shader to
the cache as soon as it is compiled. This means on a warm cache we
can avoid the wasted memory from these shaders. Worst case scenario
is we need to compile the shaders at link time but this can happen
anyway if the shader has been evicted from the cache.
Reduces memory use in Team Fortress 2 from 1.3GB -> 770MB on a
warm cache from start up to the game menu.
Acked-by: Marek Olšák <marek.olsak@amd.com>
This basically reverts c2bc0aa7b1.
By running the opts we reduce memory using in Team Fortress 2
from 1.5GB -> 1.3GB from start-up to game menu.
This will likely increase Deus Ex start up times as per commit
c2bc0aa7b1. However currently 32bit games like Team Fortress 2
can run out of memory on low memory systems, so that seems more
important.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Passes' function names, separated by comma, listed in NIR_SKIP
environment variable will be skipped in debug mode. The mechanism is
hooked into the _PASS macro, like NIR_PRINT.
The extra macro NIR_SKIP is available as a developer convenience, to
skip at pointer other than the passes entry points.
v2: Fix typo in NIR_SKIP macro. (Bas)
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Conditional rendering affects next functions:
- vkCmdDraw, vkCmdDrawIndexed, vkCmdDrawIndirect, vkCmdDrawIndexedIndirect
- vkCmdDrawIndirectCountKHR, vkCmdDrawIndexedIndirectCountKHR
- vkCmdDispatch, vkCmdDispatchIndirect, vkCmdDispatchBase
- vkCmdClearAttachments
Value from conditional buffer is cached into designated register,
MI_PREDICATE is emitted every time conditional rendering is enabled
and command requires it.
v2: by Jason Ekstrand
- Use vk_find_struct_const instead of manually looping
- Move draw count loading to prepare function
- Zero the top 32-bits of MI_ALU_REG15
v3: Apply pipeline flush before accessing conditional buffer
(The issue was found by Samuel Iglesias)
v4: - Remove support of Haswell due to possible hardware bug
- Made TMP_REG_PREDICATE and TMP_REG_DRAW_COUNT defines to
define registers in one place.
v5: thanks to Jason Ekstrand and Lionel Landwerlin
- Workaround the fact that MI_PREDICATE_RESULT is not
accessible on Haswell by manually calculating
MI_PREDICATE_RESULT and re-emitting MI_PREDICATE
when necessary.
v6: suggested by Lionel Landwerlin
- Instead of calculating the result of predicate once - re-emit
MI_PREDICATE to make it easier to investigate error states.
v7: suggested by Jason
- Make anv_pipe_invalidate_bits_for_access_flag add CS_STALL
if VK_ACCESS_CONDITIONAL_RENDERING_READ_BIT is set.
v8: suggested by Lionel
- Precompute conditional predicate's result to
support secondary command buffers.
- Make prepare_for_draw_count_predicate more readable.
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v2: by Jason Ekstrand
- Move out of the draw loop population of registers
which aren't changed in it.
- Remove dependency on ALU registers.
- Clarify usage of PIPE_CONTROL
- Without usage of ALU registers patch works for gen7+
v3: set pending_pipe_bits |= ANV_PIPE_RENDER_TARGET_WRITES
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Native file support in command line serialization isn't present in meson
0.49, but will be for 0.49.1 and 0.50
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
In some shaders, you can end up with a stride in the source of a
SHADER_OPCODE_MULH. One way this can happen is if the MULH is acting on
the top bits of a 64-bit value due to 64-bit integer lowering. In this
case, the compiler will produce something like this:
mul(8) acc0<1>UD g5<8,4,2>UD 0x0004UW { align1 1Q };
mach(8) g6<1>UD g5<8,4,2>UD 0x00000004UD { align1 1Q AccWrEnable };
The new region fixup pass looks at the MUL and sees a strided source and
unstrided destination and determines that the sequence is illegal. It
then attempts to fix the illegal stride by replacing the destination of
the MUL with a temporary and emitting a MOV into the accumulator:
mul(8) g9<2>UD g5<8,4,2>UD 0x0004UW { align1 1Q };
mov(8) acc0<1>UD g9<8,4,2>UD { align1 1Q };
mach(8) g6<1>UD g5<8,4,2>UD 0x00000004UD { align1 1Q AccWrEnable };
Unfortunately, this new sequence isn't correct because MOV accesses the
accumulator with a different precision to MUL and, instead of filling
the bottom 32 bits with the source and zeroing the top 32 bits, it
leaves the top 32 (or maybe 31) bits alone and full of garbage. When
the MACH comes along and tries to complete the multiplication, the
result is correct in the bottom 32 bits (which we throw away) and
garbage in the top 32 bits which are actually returned by MACH.
This commit does two things: First, it adds an assert to ensure that we
don't try to rewrite accumulator destinations of MUL instructions so we
can avoid this precision issue. Second, it modifies
required_dst_byte_stride to require a tightly packed stride so that we
fix up the sources instead and the actual code which gets emitted is
this:
mov(8) g9<1>UD g5<8,4,2>UD { align1 1Q };
mul(8) acc0<1>UD g9<8,8,1>UD 0x0004UW { align1 1Q };
mach(8) g6<1>UD g5<8,4,2>UD 0x00000004UD { align1 1Q AccWrEnable };
Fixes: efa4e4bc5f "intel/fs: Introduce regioning lowering pass"
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
For a long time, we based exec sizes on destination register widths.
We've not been doing that since 1ca3a94427 but a few remnants
accidentally remained.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Otherwise writes get propagated across atomics if no barrier is
used. Without barrier writes should still be visible in the same
invocation, so an atomic has to be considered a write.
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Fixes: b3c6146925 "nir: Copy propagation between blocks"
Fixes: 62332d139c "nir: Add a local variable-based copy propagation pass"
Add a test that checks that we can use the extra space allocated for
padding while allocating larger anv_states.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
If softpin is supported, create new BOs for the required size and add the
respective BO maps. The other main change of this commit is that
anv_block_pool_map() now returns the map for the BO that the given
offset is part of. So there's no block_pool->map access anymore (when
softpin is used.
v3:
- set fd to -1 on softpin case (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We are not going to use userptr for anv block pool BOs anymore. However,
so far we have been relying on the fact that userptr BOs are snooped on
non-llc platforms. Let's make sure that the block pool BOs are still
snooped, and we can also remove the clflush'ing that we do on all state
buffers.
And since we plan to remove the flushes, set the anv_bo_pool BOs to
cached (snooped on non-LLC platforms) too. For LLC platforms, they are
all cached by default, so this becomes a no-op.
v5:
- Add snooping to anv_bo_pool BOs too (Jason).
- Remove anv_gem_set_domain.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
It's possible that we still have some space left in the block pool, but
we try to allocate a state larger than that state. This means such state
would start somewhere within the range of the old block_pool, and end
after that range, within the range of the new size.
That's fine when we use userptr, since the memory in the block pool is
CPU mapped continuously. However, by the end of this series, we will
have the block_pool split into different BOs, with different CPU
mapping ranges that are not necessarily continuous. So we must avoid
such case of a given state being part of two different BOs in the block
pool.
This commit solves the issue by detecting that we are growing the
block_pool even though we are not at the end of the range. If that
happens, we don't use the space left at the end of the old size, and
consider it as "padding" that can't be used in the allocation. We update
the size requested from the block pool to take the padding into account,
and return the offset after the padding, which happens to be at the
start of the new address range.
Additionally, we return the amount of padding we used, so the caller
knows that this happens and can return that padding back into a list of
free states, that can be reused later. This way we hopefully don't waste
any space, but also avoid having a state split between two different
BOs.
v3:
- Calculate offset + padding at anv_block_pool_alloc_new (Jason).
v4:
- Remove extra "leftover".
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This commit tries to rework the code that split and returns chunks back
to the state pool, while still keeping the same logic.
The original code would get a chunk larger than we need and split it
into pool->block_size. Then it would return all but the first one, and
would split that first one into alloc_size chunks. Then it would keep
the first one (for the allocation), and return the others back to the
pool.
The new anv_state_pool_return_chunk() function will take a chunk (with
the alloc_size part removed), and a small_size hint. It then splits that
chunk into pool->block_size'd chunks, and if there's some space still
left, split that into small_size chunks. small_size in this case is the
same size as alloc_size.
The idea is to keep the same logic, but make it in a way we can reuse it
to return other chunks to the pool when we are growing the buffer.
v2:
- Include Jason's suggestions to the algorithm that returns chunks.
- Update comments.
v3:
- Disallow returning 0 blocks (Jason).
- fix min_size in the loop (Jason).
- remove temporary variables (Jason)
v4:
- return_chunk() should never return blocks larger than
pool->block_size.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We now have multiple BOs in the block pool, but sometimes we still
reference only the first one in some instructions, and use relative
offsets in others. So we must be sure to add all the BOs from the block
pool to the validation list when submitting commands.
v2:
- Don't add block pool BOs to the dependency list right before
execbuf (Jason)
- Call anv_execbuf_add_bo() to each BO in the block pools (Jason)
- Use anv_execbuf_add_bo_set() to add surface state dependencies to
execbuf.
v3:
- Add comment to the non-softpin case (Jason).
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This part of the anv_execbuf_add_bo() code is totally independent of the
BO being added. Let's split it out, so we can reuse it later.
v3: rename to anv_execbuf_add_bo_set (Jason).
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
So far we use only one BO (the last one created) in the block pool. When
we switch to not use the userptr API, we will need multiple BOs. So add
code now to store multiple BOs in the block pool.
This has several implications, the main one being that we can't use
pool->map as before. For that reason we update the getter to find which
BO a given offset is part of, and return the respective map.
v3:
- Simplify anv_block_pool_map (Jason).
- Use fixed size array for anv_bo's (Jason)
v4:
- Respect the order (item, container) in anv_block_pool_foreach_bo
(Jason).
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Change block_pool->bo to be a pointer, and update its usage everywhere.
This makes it simpler to switch it later to a list of BOs.
v3:
- Use a static "bos" field in the struct, instead of malloc'ing it.
This will be later changed to a fixed length array of BOs.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
After switching to using anv_state_table, there are very few places left
still using pool->map directly. We want to avoid that because it won't
be always the right map once we split it into multiple BOs.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Use anv_state_pool_return_blocks() to return blocks to the pool, instead
of manually pushing them.
v3:
- return blocks from the end of the chunk (Jason).
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The use of anv_state_table_add() combined with anv_state_table_push(),
specially when adding a bunch of states to the table, is very verbose.
So we add this helper that makes things easier to digest.
We also already add the anv_state_table member in this commit, so things
can compile properly, even though it's not used.
v2: assert that the states are always aligned to their size (Jason)
v3: Add "table" member to anv_state_pool in this commit.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We will need the anv_block_pool_map to find the map relative to some BO
that is not at the start of the block pool.
v2: just return a pointer instead of a struct (Jason)
v4: Update comment (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Add a structure to hold anv_states. This table will initially be used to
recycle anv_states, instead of relying on a linked list implemented in
GPU memory. Later it could be used so that all anv_states just point to
the content of this struct, instead of making copies of anv_states
everywhere.
One has to call anv_state_table_add(), which returns an index for the
state in the table, and then get a pointer to such index, and finally
fill in the rest of the struct.
TODO:
1) There's a lot of common code between this table backing store
memory and the anv_block_pool buffer, due to how we grow it. I think
it's possible to refactory this and reuse code on both places.
2) Add unit tests.
v3:
- Rename state table memfd (Jason)
- Return VK_ERROR_OUT_OF_HOST_MEMORY on more places (Jason)
- anv_state_table_grow returns VkResult (Jason)
- Rename variables to be more informative (Jason)
- Return errors on state table grow.
- Rename anv_state_table_push/pop to anv_free_list_push2/pop2
This will be renamed again to remove the trailing "2" later.
v4:
- Remove exit(-1) from anv_state_table (Jason).
- Use uint32_t "next" field in anv_free_entry (Jason).
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
There were 2 problems with this test.
First it was comparing highest, which was -1, with an uint32_t. So the
current value would never be higher than that, and the assert would
always be false. It just never reached this point because of the next
problem.
It was always looking for the highest value of each thread and storing
it in thread_max. So a test case like this wouldn't work:
[Thread]: [Blocks]
[0]: [0, 32, 64, 96]
[1]: [128, 160, 192, 224]
[2]: [256, 288, 320, 352]
Not only that would skip values and iterate only over thread number 2,
instead of walking through all of them, but thread_max was also
initialized to -1. And then compared to unsigned blocks[i][next[i].
We fix that by getting the smallest value of each thread, and checking
if it is lower than thread_min, which is initialized to INT32_MAX. And
then we end up walking through all the blocks of all threads. We also
change "blocks" to be int32_t instead of uint32_t, since in some places
(alloc_blocks) it was already referenced as int32_t, and that fixes the
comparison to -1.
v2:
- keep highest initialized to -1, and change blocks to be int32_t.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We had defined MAX_IMAGES as 8, which we used to size the array for
image push constant data. The comment there stated that this was for
gen8, but anv_nir_apply_pipeline_layout runs for all gens and writes
that array, asserting that we don't exceed that number of images,
which imposes a limit of MAX_IMAGES on all gens.
Furthermore, despite this, we are exposing up to 64 images per shader
stage on all gens, gen8 included.
This patch lowers the number of images we expose in gen8 to 8 and
keeps 64 images for gen9+ while making sure that only pre-SKL gens
use push constant space to handle images.
v2:
- <= instead of < in the assert (Eric, Lionel)
- Change the way the assertion is written (Eric)
v3:
- Revert the way the assertion is written to the form it had in v1,
the version in v2 was not equivalent and was incorrect. (Lionel)
v4:
- gen9+ doesn't need push constants for images at all (Jason)
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> (v3)
Fixes following failing vk-gl-cts cases on Linux desktop:
dEQP-VK.api.external.memory.android_hardware_buffer.suballocated.buffer.info
dEQP-VK.api.external.memory.android_hardware_buffer.suballocated.image.info
dEQP-VK.api.external.memory.android_hardware_buffer.dedicated.image.info
dEQP-VK.api.external.memory.android_hardware_buffer.dedicated.buffer.info
Fixes: 517103abf1 "anv/android: add ahardwarebuffer external memory properties"
Reported-by: Juan A. Suarez <jasuarez@igalia.com>
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Noticed while debugging V3D -- the ro->gpu_fd was freshly opened in ro
setup, and it needs to stay open until screen close (since it may be used
by renderonly) and should be the same one used by the vc4 screen.
Fixes: 7029ec05e2 ("gallium: Add renderonly-based support for pl111+vc4.")
The CTS was running out of fds, because of the ro->gpu_fd never being
closed. ro->gpu_fd should match the screen (in case the caller of
v3d_drm_screen_create_renderonly() has a scanout_for_resource() that uses
gpu_fd) and the screen is expected to close its fd at the end, fixing the
resource leak.
Fixes: e113b21cb7 ("v3d: Add renderonly support.")
I had bugs in the old path where I was laying out as tiled (so we'd render
tiled) but then only allocating space in the shared object for linear
rendering. The resource_from_handle makes it so the same layout choices
are made in both the import and export scanout cases. Also, fixes a leak
of the fd that was tripping up the CTS.
Now that we're checking PIPE_BIND_SHARED to choose to use RO, the
DRM_FORMAT_MOD_LINEAR check wasn't needed any more.
Fixes visual corruption and MMU faults in X in renderonly mode.
Fixes: bd09bb1629 ("v3d: SHARED but not necessarily SCANOUT buffers on RO must be linear.")
The current code only strips off arrays and cannot find the type
for images that are struct members.
Instead of trying to get the image type from the variable, we just
get it directly from the deref instruction.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This matches the behaviour of AMDVLK and hides banding.
It is also seems to be allowed by the Vulkan spec.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This improves cache filesystem performance, especially during CI tests
Also updated jitcache magic number due to codegen parameter changes
Removed 2 `if constexpr` to prevent C++17 requirement
Avoids confusion with other defaulted integer parameters
- fixed some unspecified usages
- removed unnecessary includes
- removed unecessary protected access specifier in buckets framework
- added graphics address translation in odd gathers
- added support for unaligned gathers in fetch shader
- changed how 2+ GB offsets are handled to make them compatible with
unaligned offsets
- updated sample from TRTT surfaces correctly
- implemented mapped status return for TRTT surfaces
- implemented per-sample instruction minLod clamp
- updated bilinear filter weight calculation to be closer to D3D specs
- implemented "ReducedTexcoordRange" operation from D3D specs to avoid
loss of precision on high-value normalized coordinates
This was already enabled for gallium based osmesa with gallium drivers
in 9d10581897, so do the same for classic
driver with classic osmesa.
Fixes: cbbd5bb889
("meson: build classic osmesa")
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Various recreation scenarios lead to API thread getting stuck in
swr_fence_finish(). This is a multi-context issue, whereby one context
overwrites the fence read-value with a previous sync's lesser value.
The fence sync value is supposed to be always increasing.
In swr_fence_cb(), only update the "read" value if the new value is
greater.
(This may seem like we're not waiting on the other context to finish, but
had we needed for it to finish there would have been a wait prior to
submitting a new sync.)
cc: mesa-stable@lists.freedesktop.org
Intel's blending hardware does not properly return 1.0 for destination
alpha for RGBX formats; it requires the factors to be overridden to
either zero or one. Broadcom vc4 and v3d also could use this override.
While overriding these factors is safe in general, Nouveau and Radeon
would prefer not to. Their blending hardware already returns correct
values for RGB/RGBX formats, and would like to avoid the resulting
per-buffer blending and independent blend factors (rgb != a) since it
can cause additional overhead.
I considered simply handling this in the driver, but it's not as nice.
pipe_blend_state doesn't have any format information, so we'd need the
hardware blend state to depend on both pipe_blend_state and
pipe_framebuffer_state. Furthermore, Intel GPUs don't have a native
RGBX_SNORM format, so I avoid exposing one, which makes Gallium fall
back to RGBA_SNORM. The pipe_surfaces we get in the driver have an RGBA
format, making it impossible to tell that there shouldn't be an alpha
channel. One could argue that st not handling it in that case is a bug.
To work around this, we'd have to expose RGBX pipe formats, mapped to
RGBA hardware formats, and add format swizzling special cases. All
doable, but it ends up being more code than I'd like.
st_atom_blend already has access to the right information and it's
trivial to accomplish there, so we just add a cap bit and do that.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
`with_gallium_icd` is never used throughout the different Meson build
files, whereas `with_opencl_icd` tracks whether or not `gallium-opencl`
was set to "icd".
Fixes: 42ea0631f1
("meson: build clover")
Signed-off-by: Pierre Moreau <pierre.morrow@free.fr>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Gallium historically has treated pipeline statistics queries as a single
query, PIPE_QUERY_PIPELINE_STATISTICS, which returns a block of 11
values. This was originally patterned after the D3D1x API. Much later,
Brian introduced an OpenGL extension that exposed these counters - but
it exposes 11 separate queries, each of which returns a single value.
Today, st/mesa simply queries all 11 values, and returns a single value.
While pipeline statistics counters aren't typically performance
critical, this is still not a great fit. A D3D1x->GL translator might
request all 11 counters by creating 11 separate GL queries...which
Gallium would map to reads of all 11 values each time, resulting in a
total 121 counter reads. That's not ideal.
This patch adds a new cap, PIPE_CAP_QUERY_PIPELINE_STATISTICS_SINGLE,
and corresponding query type PIPE_QUERY_PIPELINE_STATISTICS_SINGLE.
When calling create_query(), q->index should be set to one of the
PIPE_STAT_QUERY_* enums to select a counter. Unlike the block query,
this returns the value in pipe_query_result::u64 (as it's a single
value) instead of the pipe_query_data_pipeline_statistics group.
We update st/mesa to expose ARB_pipeline_statistics_query if either
capability is set, preferring the new SINGLE variant when available.
Thanks to Roland, Ilia, and Marek for helping me sort this out.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
This just changes the order of the switch statements, so we only
look at target if the query type is PIPE_QUERY_PIPELINE_STATISTICS.
The next commit will introduce a new SINGLE query type which can be
used for the same GL query types, and it won't want this processing.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Gallium handles pipeline statistics queries as a single query
(PIPE_QUERY_PIPELINE_STATISTICS) which returns a struct with 11 values.
Sometimes it's useful to refer to each of those values individually,
rather than as a group. To avoid hardcoding numbers, we define a new
enum for each value. Here, the name and enum value correspond to the
index in the struct pipe_query_data_pipeline_statistics result.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
A simple Vulkan extension that allows apps to query size and
usage of all exposed memory heaps.
The different usage values are not really accurate because
they are per drm-fd, but they should be close enough.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Looking at -pro we need to enable it for pipelines with just a
GS too.
This seems to reduce the hangs from
https://bugs.freedesktop.org/show_bug.cgi?id=109242 on a RX 550 to
the point where I can't reproduce, after the false start with the
wd_switch_on_eop patch due to flakiness.
(but people are reporting it does not fix the issue completely for
them on polaris 11)
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
We get a payload for the ivec3 workgroup and an int local invocation
index, and we use the core lowering to turn into the global invocation id
and the local invocation id ivec3s.
This is only exposed on V3D 4.1+, because we didn't have the TMU write
operations for images on 3.3 (To do GLES 3.1 there, you have to lower it
to SSBO load/stores, which is a problem to solve later).
This was an arbitrary "we support lots of stuff" value when I started the
driver. However, at 400 we expose OES_gpu_shader5, which claims support
for dynamically indexing samplers, which the driver doesn't do yet.
We've been relying on linking splitting up our varying matrices into
separate vectors, but with SSO that doesn't happen. Supporting matrix
inputs isn't too hard, though.
Otherwise, the simulator raises the GMP interrupt and waits for it to be
handled, and v3d ends up spinning in v3d_hw_tick(). Aborting right when
violation happens gives us a chance to look at the backtrace of whatever
thread triggered the violation.
Fix crashes with
dEQP-VK.spirv_assembly.instruction.compute.workgroup_memory.*16
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Causes hangs on some machines.
What works for dEQP-VK.tessellation.shader_input_output.barrier:
- running num_patches = 6 (which limits LDS to 32 KiB)
- running num_patches = 8, and artificially cutting LDS size at 32 KiB.
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
From @jekstrand's nir-1-bit-bool branch, with improved ior/inot lowering.
ior: fmax instead of fadd allows removing the fsat.
inot: seq(x, 0) can be better than fsub(1, x). On a2xx, it works better
with the scalar instruction set.
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Replace calls to create hash tables and sets that use
_mesa_hash_pointer/_mesa_key_pointer_equal with the helpers
_mesa_pointer_hash_table_create() and _mesa_pointer_set_create().
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Eric Engestrom <eric@engestrom.ch>
Replace calls to create hash tables and sets that use
_mesa_hash_pointer/_mesa_key_pointer_equal with the helpers
_mesa_pointer_hash_table_create() and _mesa_pointer_set_create().
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Eric Engestrom <eric@engestrom.ch>
These combinations are common enough and deserve a shortcut.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Eric Engestrom <eric@engestrom.ch>
This function is modeled after the aux_op functions except that it has a
lot more parameters because it deals with two images as well as source
and destination regions.
Function's out variable could be an array dereferenced by an array:
func(v[w[i]]);
or something more complicated.
Copy index in any case.
Fixes: 76c27e47b9 ("glsl: Copy function out to temp if we don't directly ref a variable")
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The original idea was that the backend compiler could eliminate
surfaces, so we would have it mark which ones are actually used,
then shrink the binding table accordingly. Unfortunately, it's a
pretty blunt mechanism - it can only prune things from the end,
not the middle - since we decide the layout before we even start
the backend compiler, and only limit the size. It also basically
gives up if it sees indirect array access.
Besides, we do the vast majority of our surface elimination in NIR
anyway, not the backend - and I don't see that trend changing any
time soon. Vulkan abandoned this plan a long time ago, and I don't
use it in Iris, but it's still been kicking around in i965.
I hacked shader-db to print the binding table size in bytes, and
observed no changes with this patch. So, this code appears to do
nothing useful.
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
DeprecationWarning: the imp module is deprecated in favour of importlib
Instead of complicated logic, just import the file directly.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Instead of emitting all of the conditions for the cases of a switch
statement up-front, emit them on-the-fly as we emit the code for each
case. The original justification for this was that we were going to
have to build a default case anyway which would need them all. However,
we can just trust CSE to clean up the mess in that case. Emitting each
condition right before the if statement that uses it reduces register
pressure and, in one customer benchmark, reduces spilling and improves
performance by about 2x.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Even though no one's been brave enough to ever use this pass, I like to
keep it functionally working.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Instead of applying the workaround universally, detect semi-old GLSLang
via the generator ID and only enable the workaround on old GLSLang.
This isn't nearly as precise as one would like it to be because the
first GLSLang generator id version bump was on October 7, 2017 which is
about 1.5 years after the bug was fixed. However, it at least lets us
disable it for non-GLSLang and for more modern versions.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
A long time in a galaxy far far away, there was a GLSLang bug with how
it handled samplers passed in as function parameters. (The bug can be
found here: https://github.com/KhronosGroup/glslang/issues/179.)
Unfortunately, that version was shipped in several apps and has been
causing heartburn for our SPIR-V parser ever since.
Recent changes to NIR uncovered a moderately old bug in how we work
around this issue. In particular, we ended up with a deref_cast from
uniform to local which is not a no-op cast so nir_opt_deref wasn't
getting rid of the cast. The only reason why it worked before was
because someone just happened to call nir_fixup_deref_modes which
"fixed" the cast (that shouldn't be happening) and then a later round of
copy-prop would get rid of it. The fact that the deref_cast survived
that long without causing trouble for other parts of NIR is a bit
surprising.
Just whacking the mode of the pointer seems to fix it fairly
unobtrusively. Currently, only apps with this bug will have a local
variable containing an image or sampler.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109304
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
If the TCS and TES are linked together, we can simply replace the TES's
gl_PatchVerticesIn system value with a constant, possibly allowing extra
optimization or letting the driver avoid uploading a special value.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
With the new handling of bool types, the conversion to float in glsl_to_nir
should not apply to bool types anymore.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
out_type in the default cast case is always GLSL_TYPE_FLOAT, so we get a
mov otherwise.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
All alu instructions emitted with native_integers=false expect float
(or bool in some cases) constants, so this change is necessary.
This will cause changes with some intrinsics which had integer sources,
such as nir_intrinsic_load_uniform. Apparently it might cause issues with
some opt passes, but perhaps those don't apply in OpenGL ES 2.0 cases?
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The num_components value passed into get_mul_for_src is used to only
compose the parts of the swizzle that we know will be used so we don't
compose invalid swizzle components. However, we had a bug where we
passed the number of components of the add all the way through. For the
given source, we need the number of components read from that source.
In the case where we have a narrow add, say 2 components, that is
sourced from a chain of wider instructions, we may not compose all the
swizzles. All we really need to do is pass through the right number of
components at each level.
Fixes: 2231cf0ba3 "nir: Fix output swizzle in get_mul_for_src"
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
GL_ARB_gl_spirv does not provide a sampler deref for e.g. texelFetch(),
so we can't assume that both are present and identical. Simply lower
each if it is present.
Fixes regressions in GL_ARB_gl_spirv tests since I switched everyone to
using this pass. Thanks to Alejandro Piñeiro for catching these.
Fixes: f003859f97 nir: Make gl_nir_lower_samplers use gl_nir_lower_samplers_as_deref
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: Alejandro Piñeiro <apinheiro@igalia.com>
Fixes the following errors:
usage: which [-as] program ...
/Users/travis/.travis/job_stages: line 110: --version: command not found
... caused by the use of an undefined $LLVM_CONFIG
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This will allow drivers to pin shader buffers if necessary.
i965 and anv do not need to do this today, but iris will.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Currently, BLORP expects drivers to provide two functions for dealing
with buffers: blorp_emit_reloc and blorp_surface_reloc. Both record a
relocation and combine the BO address and offset into a full 64-bit
address. Traditionally, blorp_surface_reloc has written that combined
address to an implicitly-known buffer where surface states are stored.
(In contrast, blorp_emit_reloc returns the value.)
The upcoming Iris driver stores surface states in multiple buffers,
which makes it impossible for blorp_surface_reloc to write the combined
address - it only takes an offset, not the actual buffer to write to.
This commit adds a third function, blorp_get_surface_address, which
combines and returns an address, which is then passed to ISL's surface
state fill functions. Softpin-only drivers can return a real address
here and skip writing it in blorp_surface_reloc. Relocation-based
drivers are have options. They can simply return 0 from the new
function, and continue writing the address from blorp_surface_reloc.
Or, they can return a presumed address from blorp_get_surface_address,
and have other relocation processing write the real value later.
For now, i965 and anv simply return 0.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Make sure that the next line starts with spaces so that bullets are
maintained throughout, add `` around a few more special tokens, and fix
SAMPLE_COUNT_TEXTURE -> SAMPLE_COUNT.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>
In all GLSL ES versions output variables in fragment shader are allowed
to be invariant.
From Section 4.6.1 ("The Invariant Qualifier") GLSL ES 1.00 spec:
"Only the following variables may be declared as invariant:
...
- Built-in special variables output from the fragment shader."
From Section 4.6.1 ("The Invariant Qualifier") GLSL ES 3.00 spec:
"Only variables output from a shader can be candidates for invariance."
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107842
This adds a second level of caching for the pre-lowered NIR that's only
based off of the shader module, entrypoint and specialization constants.
This is enough for spirv_to_nir as well as our first round of lowering
and optimization. Caching at this level should allow for faster shader
recompiles due to state changes.
The NIR caching does not get serialized to disk via either the
VkPipelineCache serialization mechanism or the transparent on-disk
cache. We could but it's usually not that expensive to fall back to
SPIR-V for the odd cache miss especially if it only happens once for
several misses and it simplifies the cache.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
The stuff hashed by anv_pipeline_hash_shader is exactly the inputs to
anv_shader_compile_to_nir so it can be used for NIR caching.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
They have glsl_sampler_dim enum values of 8 and 9 which don't work when
you & them with 0x7. Fortunately, we have plenty of bits.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Thanks to the new NIR load_descriptor intrinsic added by the UBO/SSBO
lowering series, we weren't getting UBO pushing because the UBO range
detection pass couldn't see the constants it needed. This fixes that
problem with a quick round of constant folding. Because we're folding
we no longer need to go out of our way to generate constants when we
lower the vulkan_resource_index intrinsic and we can make it a bit
simpler.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
The last round of fixing 3d layer+level layout skipped the tiled case,
since tiled texture support was not in place yet. This finishes the
job.
Signed-off-by: Rob Clark <robdclark@gmail.com>
This is known when the CSO is created, so no need to patch it in later.
Also, it seems like smaller textures where the first level is small
enough to be linear, it seems like we should set linear tile mode.
See: dEQP-GLES3.functional.texture.format.unsized.rgb_unsigned_byte_3d_pot
Signed-off-by: Rob Clark <robdclark@gmail.com>
Previously we'd use format/etc from the primary (z32) buffer for the
stencil (s8), due to confusion about rsc vs psurf. Rework this to drop
extra arg and push down handling of separate stencil case (and make sure
we take the fmt from the right place).
This doesn't completely fix separate-stencil, but at least it avoids the
GPU scribbling over random other cmdstream buffers and causing a bunch
of bogus fails in dEQP.
Signed-off-by: Rob Clark <robdclark@gmail.com>
If nothing else, this will make problems with cmdstream getting blit
over with pixels easier to track down (ie. faults when it first happens
rather than strange failures later from corrupted cmdstream when a
stateobj is later reused).
(NOTE this somewhat depends on the kernel supporting the flag, and the
iommu implementation. But the worst case is just that the cmdstream
ends up writeable as before.)
Signed-off-by: Rob Clark <robdclark@gmail.com>
The check for location aliasing was always asuming output variables
but this validation is also called for input variables.
Fixes: e2abb75b0e ("glsl/linker: validate explicit locations for SSO programs")
Cc: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Patch moves intel_tiled_memcpy[_sse41] libraries to isl, renames some
functions and types and makes the required build system changes for
meson, automake and Android. No functional changes are introduced.
v2: code cleanups, move isl_get_memcpy_type to i965 (Jason)
v3: move isl_mem_copy_fn to priv header, cleanups (Jason, Dylan)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Now that we have software implementations of ARB_gpu_shader_int64 and
ARB_gpu_shader_fp64 we can unconditionally enable these extensions.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Shaders containing software implementations of double-precision
operations can be very large such that we cannot stack-allocate
an array of grf_count*16.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Shaders containing software implementations of double-precision
operations can be very large such that we have more the 2^16 virtual
registers during optimization.
Move the 'nr' field to the union containing the immediate storage and
expand it to 32-bits.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The next patch replaces an unsigned bitfield with a plain unsigned,
which triggers gcc to begin warning on signed/unsigned comparisons.
Keeping this patch separate from the actual move allows bisectablity and
generates no additional warnings temporarily.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
A follow on commit will move nr to the same union as the immediate
data, so we should assert these invariants before we overwrite the nr
field.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
A follow on patch will move the 'nr' field to the union containing the
immediate field, so prepare by checking that we're only testing these
assertions if the .file is correct.
The assertions with != ARF were kind of silly to begin with because the
<128 check is specifically only for things in the GRF.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
NIR metadata validation verifies that the debug bit was unset (by a call
to nir_metadata_preserve) if a NIR optimization pass made progress on
the shader. With the expectation that the NIR shader consists of only a
single main function, it has been safe to call nir_metadata_preserve()
iff progress was made.
However, most optimization passes calculate progress per-function and
then return the union of those calculations. In the case that an
optimization pass makes progress only on a subset of the functions in
the shader metadata validation will detect the debug bit is still set on
any unchanged functions resulting in a failed assertion.
This patch offers a quick solution (short of a larger scale refactoring
which I do not wish to undertake as part of this series) that simply
unsets the debug bit on unchanged functions.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Will be used to communicate that a shader uses 64-bit operations to the
concerned lowering passes.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We're going to have multiple functions, so nir_shader_get_entrypoint()
needs to do something a little smarter.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Previously it assumed that only a single function (the entrypoint)
existed and attempted to lower constant initializers of shader outputs
for each function, for instance.
v2: use mix and findMSB to optimise.
v3: [Sagar] Fix zFrac0 == 0u case in __normalizeRoundAndPackFloat64
Signed-off-by: Elie Tournier <elie.tournier@collabora.com>
The following patches will add implementations of various
double-precision operations to this file.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Will be used to convert the .glsl source file containing software fp64
routines to a .h file that can be included while building the compiler.
This commit contains two squashed together: the first from Ian adding
the utility (with the existing title), and the second from Dylan making
the code both python2 and python3 compatible.
This is somewhat modeled after the xxd utility that comes with Vim.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
xxd.py: Make python2 and 3 compatible
This makes use of unicode_literals, so that undecorated strings are
considered text (python2 unicode, python3 str) and not bytes in python2
and text in python3. It makes use of io.open, which provides python2
with python3's open behavior (it's an alias in python3), in particular
support for the 't' and 'b' option. Finally, it decorates all of the
string literals with the 'b' prefix, so that python interprets them as
bytes.
I've removed the stdin and stdout options, as python2 always requires
these to be bytes, but python3 always treats them as text (there is a
way to get at the underlying bytes buffer, but that's even more
complexity), and makes the input files required arguments.
In the meson we use the '@INPUT@' shorthand instead of listing each
input, as meson will expand that to [prog_python, '@INPUT0@', @INPUT1@,
..., @OUTPUT@, ...]
Otherwise we can end up with IR that looks like this:
(
(declare (temporary ) vec4 f@8)
(assign (xyzw) (var_ref f@8) (var_ref f) )
(call f16 ((swiz y (var_ref f@8) )))
(assign (xyzw) (var_ref f) (var_ref f@8) )
))
When we really need:
(declare (temporary ) float inout_tmp)
(assign (x) (var_ref inout_tmp) (swiz y (var_ref f) ))
(call f16 ((var_ref inout_tmp) ))
(assign (y) (var_ref f) (swiz y (swiz xxxx (var_ref inout_tmp) )))
(declare (temporary ) void void_var)
The GLSL IR function inlining code seemed to produce correct code
even without this but we need the correct IR for GLSL IR -> NIR to
be able to understand whats going on.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Based on a patch from Tim Arceri, but I had to substantially rewrite it
as a result of the NIR derefs rework.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
These are broken on a future platform, but it turns out we don't need
to fix them, since they're just type-converting moves with strided
source. Kill them.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
This legalization pass is meant to handle situations where the source
or destination regioning controls of an instruction are unsupported by
the hardware and need to be lowered away into separate instructions.
This should be more reliable and future-proof than the current
approach of handling CHV/BXT restrictions manually all over the
visitor. The same mechanism is leveraged to lower unsupported type
conversions easily, which obsoletes the lower_conversions pass.
v2: Give conditional modifiers the same treatment as predicates for
SEL instructions in lower_dst_modifiers() (Iago). Special-case a
couple of other instructions with inconsistent conditional mod
semantics in lower_dst_modifiers() (Curro).
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Currently the visitor attempts to enforce the regioning restrictions
that apply to double-precision instructions on CHV/BXT at NIR-to-i965
translation time. It is possible though for the copy propagation pass
to violate this restriction if a strided move is propagated into one
of the affected instructions. I've only reproduced this issue on a
future platform but it could affect CHV/BXT too under the right
conditions.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
I triggered this bug while prototyping code for a future platform on
IVB. Could be a problem today though if a strided move is
copy-propagated into a type-converting move with DF destination.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
This seems to be a problem in combination with the lower_regioning
pass introduced by a future commit, which can modify a SIMD-split
instruction causing its execution size to become illegal again. A
subsequent call to lower_simd_width() would hit this bug on a future
platform.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Align16 is no longer a thing, so a new implementation is provided
using Align1 instead. Not all possible swizzles can be represented as
a single Align1 region, but some fast paths are provided for
frequently used swizzles that can be represented efficiently in Align1
mode.
Fixes ~90 subgroup quad swap Vulkan CTS tests.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
lower_integer_multiplication() implements 32x32-bit multiplication on
some platforms by bit-casting one of the 32-bit sources into two
16-bit unsigned integer portions. This can give incorrect results if
the original instruction specified a source modifier. Fix it by
emitting an additional MOV instruction implementing the source
modifiers where necessary.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Looks like it is impossible that 'last' variable is a null
because at least the get_vs_prog_data shouldn't return a null pointer.
So this check is unnecessary starts from commit:
99d497c5b6 "anv/pipeline: Replace get_fs_input_map with ..."
This small issue is found by cppcheck.
Signed-off-by: Andrii Simiklit <andrii.simiklit@globallogic.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This ensures that during encoding, applications can get
the correct status of the surface before submitting
more operations on the same.
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Indrajit Das <indrajit-kumar.das@amd.com>
This reverts commit f6a6da8131.
With this commit we see massive amounts of asserts triggering
in lp_fence_wait(), assert(f->issued), for instance with libgl_xlib
state tracker and piglit. Not entirely sure if the assert could
just be removed.
We have found some pipe_surface leaks internally.
This is the same code as surface_destroy in radeonsi.
Ideally, surface_destroy would be in pipe_screen.
Cc: 18.3 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
With Mesa 18.1, commit be973ed21f, si_llvm_load_input_vs()
changed the number of source 32-bit wide dword components
used for fetching vertex attributes into the vertex shader
from a constant 4 to a variable num_channels number, depending
on input data format, with some special case handling for
input data formats like 64-Bit doubles.
In the case of a GL_DOUBLE input data format with one
or two components though, e.g, submitted via ...
a) glTexCoordPointer(1, GL_DOUBLE, 0, buffer);
b) glTexCoordPointer(2, GL_DOUBLE, 0, buffer);
... the input format would be SI_FIX_FETCH_RG_64_FLOAT,
but no special case handling was implemented for that
case, so in the default path the number of 32-bit
dwords would be set to the number of float input components
derived from info->input_usage_mask. This ends with corrupted
input to the vertex shader, because fetching a 64-bit double
from the vbo requires fetching two 32-bit dwords instead of 1,
and fetching a two double input requires 4 dword fetches
instead of 2, so in these cases the vertex shader receives
incomplete/truncated input data:
a) float v = gl_MultiTexCoord0.x; -> v.x is corrupted.
b) vec2 v = gl_MultiTexCoord0.xy; -> v.x is assigned
correctly, but v.y is corrupted.
This happens with the standard TGSI IR compiled shaders.
Under NIR with R600_DEBUG=nir, we got correct behavior
because the current radeonsi nir code always assigns
info->input_usage_mask = TGSI_WRITEMASK_XYZW, thereby
always fetches 4 dwords regardless of what the shader
actually needs.
Fix this by properly assigning 2 or 4 dword fetches for
one or two component GL_DOUBLE input.
Fixes: be973ed21f ("radeonsi: load the right number of
components for VS inputs and TBOs")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
Cc: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Fixes artifacts in World of Warcraft when Multi-sample Alpha-Test is
enabled with DXVK.
It also fixes artifacts with Fallout 4's god rays with DXVK.
Various piglit interpolateAt*() tests under NIR are also fixed.
v2: formatting fix
update commit message to include Fallout 4 and the Fixes tag
Fixes: f4e499ec79 ('radv: add initial non-conformant radv vulkan driver')
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106595
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
The Vulkan spec 1.1.97 says:
"variablePointers specifies whether the implementation supports
the SPIR-V VariablePointers capability. When this feature is
not enabled, shader modules must not declare the
VariablePointers capability."
As the SPIR-V feature is enabled, we should turn on the
extension feature as well.
All dEQP-VK.spirv_assembly.instruction.compute.variable_pointers.*
pass with the khronos internal repo. Note that a bunch of them
fails with the public repo, but it's expected as they violate the
specification.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
From glibc printf(3):
Z A nonstandard synonym for z that predates the appearance of z.
Do not use in new code.
Z may not exist on non-glibc systems. Prefer the standard symbol.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
If there is no last fence, due to no rendering happening yet, just
create a new signaled fence and return it, to match the expectations of
the EGL sync fence API.
Fixes random "Could not create sync fence 0x3003" assertion failures from
Skia on Android, coming from the following code:
https://android.googlesource.com/platform/frameworks/base/+/master/libs/hwui/pipeline/skia/SkiaOpenGLPipeline.cpp#427
Reproducible especially with thread count >= 4.
One could make the driver always keep the reference to the last fence,
but:
- the driver seems to explicitly destroy the fence whenever a rendering
pass completes and changing that would require a significant functional
change to the code. (Specifically, in lp_scene_end_rasterization().)
- it still wouldn't solve the problem of an EGL sync fence being created
and waited on without any rendering happening at all, which is
also likely to happen with Android code pointed to in the commit.
Therefore, the simple approach of always creating a fence is taken,
similarly to other drivers, such as radeonsi.
Tested with piglit llvmpipe suite with no regressions and following
tests fixed:
egl_khr_fence_sync
conformance
eglclientwaitsynckhr_flag_sync_flush
eglclientwaitsynckhr_nonzero_timeout
eglclientwaitsynckhr_zero_timeout
eglcreatesynckhr_default_attributes
eglgetsyncattribkhr_invalid_attrib
eglgetsyncattribkhr_sync_status
v2:
- remove the useless lp_fence_reference() dance (Nicolai),
- explain why creating the dummy fence is the right approach.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
The binding is checked against the limits later in the function, so we
need to make sure we don't overflow before the check here.
Fixes this valgrind warning (and sometimes segfault):
==1460== Invalid write of size 4
==1460== at 0x74C98DD: ast_declarator_list::hir(exec_list*, _mesa_glsl_parse_state*) (ast_to_hir.cpp:4943)
==1460== by 0x74C054F: _mesa_ast_to_hir(exec_list*, _mesa_glsl_parse_state*) (ast_to_hir.cpp:159)
==1460== by 0x7435C12: _mesa_glsl_compile_shader (glsl_parser_extras.cpp:2130)
in
dEQP-GLES31.functional.debug.negative_coverage.get_error.compute.
exceed_atomic_counters_limit
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
I think this was copy-and-paste mistake -- nir_opt_large_constants was
passing in glsl_get_natural_size_align_bytes() given brw_nir.c's arguments
to the opt pass.
I wanted to reuse this function for handling constant offsets of arrays of
images in V3D.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Rob Clark <robdclark@gmail.com>
V3D returns the texels in a different order in the resulting vec4 from
what GLSL wants, so we need to put in a swizzle. Fixes
dEQP-GLES31.functional.texture.gather.basic.2d.rgba8.base_level.level_1
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This way they can be shared. Build tested with meson, but not too sure
on the autotools stuff though.
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Initialize the variable with NULL. Fixes the following
In file included from ../src/compiler/nir/nir_lower_io.c:34:
../src/compiler/nir/nir_lower_io.c: In function ‘nir_lower_explicit_io’:
../src/compiler/nir/nir.h:668:11: warning: ‘addr’ may be used uninitialized in this function [-Wmaybe-uninitialized]
return src;
^~~
../src/compiler/nir/nir_lower_io.c:735:17: note: ‘addr’ was declared here
nir_ssa_def *addr;
^~~~
v2: Avoid using a 'default' case so we get help from the compiler when
new deref types are added. (Lionel)
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
"pad" was missing in Mesa's msm_drm.h. sizeof(drm_msm_gem_info)
remains the same, but now the compiler initializes the field to
zero.
Buffer allocation results in EINVAL without this for me.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Kristian Høgsberg <hoegsberg@gmail.com>
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@gmail.com>
the naming is a bit confusing no matter how you look at it. Within SPIR-V
"global" memory is memory accessible from all threads. glsl "global" memory
normally refers to shader thread private memory declared at global scope. As
we already use "shared" for memory shared across all thrads of a work group
the solution where everybody could be happy with is to rename "global" to
"private" and use "global" later for memory usually stored within system
accessible memory (be it VRAM or system RAM if keeping SVM in mind).
glsl "local" memory is memory only accessible within a function, while SPIR-V
"local" memory is memory accessible within the same workgroup.
v2: rename local to function as well
v3: rename vtn_variable_mode_local as well
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This has never functioned and probably wont ever function, due to the
way gallium media state trackers are architected and the tegra video
decoder is architected.
Cc: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Fixes: 1755f608f5
("tegra: Initial support")
The version exported by LLVM in its CMake configuration files can
include the “svn” suffix when building a development version (for
example “8.0.0svn”). However the exported clang headers are still found
under “lib/clang/8.0.0/”, without the “svn” suffix.
Meson takes care of removing the “svn” suffix from the version when
using the dependency’s `version()` method.
This processing is already performed in “configure.ac” when using
autotools.
Signed-off-by: Pierre Moreau <pierre.morrow@free.fr>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
In the following scenario :
1. Create image format R8G8B8A8_UNORM
2. Create image view format R8G8B8A8_SRGB
3. Clear the view through a sub pass to a particular color
4. Barrier on the image to from color attachment to source transfer
5. Copy the image into a linear buffer to check the content
The step 4 resolving the clear color is unaware of the SRGB format of
the view, because the blorp resolve operations operate on images the
color associated with the resolve will not operate on SRGB format but
UNORM. Leading to the wrong color being written into surfaces.
This change forces a clear color resolve at the end of the render pass
so following resolves won't have to deal with the clear color with a
format that doesn't match the image's format.
On gfxbench vulkan_5_normal 1280x720, this appear to cost us ~0.5fps,
from 49.316 down to 48.949.
v2: Only fast clear resolve when image & view have different formats
(Lionel)
v3: Update warning (Jason)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108911
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: mesa-stable@lists.freedesktop.org
Fixes following errors from valgrind output:
==23388== Conditional jump or move depends on uninitialised value(s)
==23388== at 0x48B4924: loader_dri3_drawable_init (loader_dri3_helper.c:381)
==23388== by 0x48A97D2: dri3_create_drawable (dri3_glx.c:386)
==23388== by 0x489E190: driFetchDrawable (dri_common.c:369)
==23388== by 0x48A9187: dri3_bind_context (dri3_glx.c:195)
==23388== by 0x488B75C: MakeContextCurrent (glxcurrent.c:220)
==23388== by 0x488B8DB: glXMakeCurrent (glxcurrent.c:267)
==23388== by 0x10A987: ??? (in /usr/bin/glxgears)
==23388== by 0x4BEB412: (below main) (in /usr/lib64/libc-2.28.so)
==23388==
==23388== Conditional jump or move depends on uninitialised value(s)
==23388== at 0x48B5A40: loader_dri3_swap_buffers_msc (loader_dri3_helper.c:923)
==23388== by 0x48A9B7E: dri3_swap_buffers (dri3_glx.c:587)
==23388== by 0x4887A81: glXSwapBuffers (glxcmds.c:857)
==23388== by 0x10ADED: ??? (in /usr/bin/glxgears)
==23388== by 0x4BEB412: (below main) (in /usr/lib64/libc-2.28.so)
Fixes: 2e12fe425f "loader/dri3: Enable adaptive_sync via _VARIABLE_REFRESH property"
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
This stores the raster state and calls the correct primconvert interface
using the currently bound raster state.
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
For now, it's hidden behind a cap. Hopefully, we can eventually drop
that along with all the manual offset code in spirv_to_nir.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The choice of whether or not we should use block_load/store isn't a
choice between external and not so much as a choice between deref
instructions and manually calculated offsets. In vtn_pointer_from_ssa,
we guard the index+offset case behind vtn_pointer_uses_ssa_offset and
then branch out from there.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Instead of baking in uvec2 for UBO and SSBO pointers and uint for push
constant and shared memory pointers, make it configurable.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Previously, we hard-coded the rule about workgroup variables and the
builder lower_workgroup_access_to_offsets flag. Instead base it on the
handy helper we have for exactly this sort of thing.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Variable pointers being well-defined across the block boundary requires
a couple of very specific SPIR-V validation rules. Normally, we'd trust
the validator to catch these but since CTS tests have been found in the
wild which violate them, we'll carry our own checks.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
This new pass is for lowering explicitly laid out memory coming in from
SPIR-V or a similar source. It's quite a bit more complicated than the
normal lower_io because we have to be able to handle matrices. The
way the stride information is stored for matrices is awkward and dealing
with row-major matrices is especially painful.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
This commit adds a new num_components value for intrinsic sources of -1
which means that it consumes everything and the number of components
effectively isn't validated. This is useful for deref sources which
just take the result of the deref and we leave it up to the driver to
decide what that size should be.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
We added this assert when first moving derefs over to instructions to
ensure that deref chains could go all the way back to the variables.
Now that we're going to start using derefs for things that we can do
variable pointers on such as UBOs and SSBOs, we need to be able to run
derefs through phi nodes, selects, and basically anything else.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
We already detect any incomplete deref chains (where the deref is used
for something other than another deref or a load/store) and flag the
variable as used thanks to deref_used_for_not_store. All that's left to
do is to properly skip casts when cleaning up.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
This pass is used when, for instance, we lazily change the mode of
variables rather than replacing the variable with a new one. Since we
only do this in cases where we know we have full deref chains, it's ok
to just skip them in fixup_deref_modes.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
The code which constructs deref paths already gives you the path
starting at the nearest deref_cast or deref_var. All we need to do for
casts is handle the case where the start of the path isn't a deref_var.
For ptr_as_array derefs, we just bail if we have any after the
divergence point between the two derefs. We may be able to do better in
the future but this works for now.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
When handling casts, we can't blindly propagate the parent of a cast
into a ptr_as_array deref because doing so might loose the stride
information from the cast. Instead, before we can propagate into
ptr_as_array derefs, we need to check that the cast is a cast of an
array deref and that the stride matches. For other types of derefs, we
can continue to propagate casts as normal because they don't need the
stride. We also add an optimization which can combine a ptr_as_array
deref with it parent if it is also an array deref of some form.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
These correspond directly to SPIR-V's OpPtrAccessChain. As such, they
treat whatever their parent gives them as if it's the first element in
some array and dereferences that array. If the parent is, itself, an
array deref, then the two indices can just be added together to get the
final array deref. However, it can also be used in cases where what you
have is a dereference to some random vec2 value somewhere. In this
case, we require a cast before the ptr_as_array and use the ptr_stride
field in the cast to provide a stride for the ptr_as_array derefs.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
We're going to want to do more deref optimizations going forward and
this gives us a central place to do them. Also, cast propagation will
get a bit more complicated with the addition of ptr_as_array derefs.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Instead of just storing the decorations in the vtn_type, propagate them
all the way through to the glsl_type. For array strides, this means we
need to handle them earlier so we break array stride handling into it's
own function and explicitly call it for both pointer and array types.
Due to type deduplication in the SPIR-V, we may have explicit layout
decorations on all sorts of types that don't actually want them. In
order to prevent these leaking into unfortunate places in NIR, we
explicitly strip them off before creating NIR variables and when casting
pointers to non-external memory.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
SPIR-V allows for matrix and array types to be decorated with explicit
byte stride decorations and matrix types to be decorated row- or
column-major. This commit adds support to glsl_type to encode this
information. Because this doesn't work nicely with std430 and std140
alignments, we add asserts to ensure that we don't use any of the std430
or std140 layout functions with explicitly laid out types.
In SPIR-V, the layout information for matrices is applied to the parent
struct member instead of to the matrix type itself. However, this is
gets rather clumsy when you're walking derefs trying to compute offsets
because, the moment you hit a matrix, you have to crawl back the deref
chain and find the struct. Instead, we take the same path here as we've
taken in spirv_to_nir and put the decorations on the matrix type itself.
This also subtly adds support for strided vector types. These don't
come up in SPIR-V directly but you can get one as the result of taking a
column from a row-major matrix or a row from a column-major matrix.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
This is C++ so we can just poke at the fields of glsl_type if we wish
and calling get_instance is way easier and more reliable than handling
each instance separately. While we're at it, we re-arrange the base
type labels to match the enum order and add 8-bit type support.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
It was added in bce6f99875 even though it's completely redundant with
glsl_array_type().
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Previously, NIR had a single nir_var_uniform mode used for atomic
counters, UBOs, samplers, images, and normal uniforms. This commit
splits this into nir_var_uniform and nir_var_ubo where nir_var_uniform
is still a bit of a catch-all but the nir_var_ubo is specific to UBOs.
While we're at it, we also rename shader_storage to ssbo to follow the
convention.
We need this so that we can distinguish between normal uniforms and UBO
access at the deref level without going all the way back variable and
seeing if it has an interface type.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
I have no idea how shader_storage made it into the list of banned
variable modes for stores but it clearly should be allowed. This only
doesn't cause us a problem today because we never actually use derefs on
shader_storage variables.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
This doesn't currently change anything because array indices are
required to be 32 bits and all derefs are also 32 bits. However, we
will one day have 64-bit derefs for OpenCL.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
We already had code in link_as_ssa to handle bit sizes; we just need to
use it. While we're at it we clean up link_as_ssa a bit and add an
explicit bit_size parameter in preparation for a day when we have derefs
that aren't 32 bit.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
This simplifies our deref handling by emitting the actual NIR deref
instructions on-the-fly instead of of building up a deref chain and then
emitting them at the last moment. In order for this to work with the
parts of the compiler that assume they can chase deref chains, we have
to run nir_rematerialize_derefs_in_use_blocks_impl to put the derefs
back in the right places. Otherwise, in cases such as loop continues
where the SPIR-V blocks are not in the same order as the NIR blocks, we
may end up with a deref chain with a parent that does not dominate it's
child and nir_repair_ssa_impl will insert phis in the deref chain.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
The loop through instructions doesn't set the cursor for us so unless we
set it somewhere, we may end up emitting instructions in the wrong
place. The only reason why we haven't been bitten by this in the past
is that it only happens in a few variable pointers cases and the CTS
tests for those don't use much control flow so things were getting
emitted in the correct order by accident.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Note that these limits are exact, not a "precision is at least x",
as texel coords also get snapped to a multiple of this step size
before filtering.
This fixes CTS tests
dEQP-VK.texture.explicit_lod.2d.sizes.31x55_nearest_linear_mipmap_nearest_repeat
dEQP-VK.texture.explicit_lod.2d.sizes.57x35_nearest_linear_mipmap_nearest_repeat
Fixes: f4e499ec79 "radv: add initial non-conformant radv vulkan driver"
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109151
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
These days, we have two sampler lowering passes. The newer one,
gl_nir_lower_samplers_as_deref, is used by radeonsi. It rewrites
variables to drop structures out of sampler deref chains, to make
life simpler. It then sets var->data.binding for non-bindless
sampler and image variables based on the GL uniform storage's
opaque index values.
The older one converts sampler deref chains (nir_tex_src_texture_deref)
to a numerical offset (nir_tex_src_texture_offset). It also stores the
constant-valued portion of that number in tex->texture_index, making
life really simple for drivers that don't support indirects. It too
pokes at GL uniform storage's opaque index values.
Logically, we can do the first pass (simplify derefs, set bindings)
then the second (turn derefs to offsets, set texture_index). This
patch does exactly that, eliminating some redundancy (only one pass
has to poke at GL uniform storage), and gaining proper var->data.binding
values for drivers using the full lowering.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
We recurse to remove structures, and at each step, re-modify the
resulting type for our link in the deref chain. For arrays, the
result of recursion is the new underlying type - so we wrap it with
the array dimensionality again. For structs, we want to simply use
the new underlying type, skipping the struct altogether.
The correct way to do this is to do nothing at all. Previously, we
had reset type to next->type, which is the /old/ field type, not the
new field type we obtained by recursing. This undid our recursive work.
Fixes about 338 tests with nested structs, such as:
dEQP-GLES2.functional.uniform_api.value.initial.get_uniform.nested_structs_arrays.sampler2D_samplerCube_fragment
Note that currently only radeonsi uses this pass, and NIR support is
disabled there by default, so the breakage was likely not seen by most
people. The next commit uses this pass for more drivers, so this fix
prevents regressions from that change.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
unused and gcc complains about strncpy. (from what I can see because
strncpy does not leave a 0 byte on truncate. That said we don't use
it so this does not fix a real bug).
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
We do the ImageFormatProperties check already, and rejecting an usage
flag when both ImageFormatProperties and the WSI (which is Android)
support it is not allowed.
Intel does support storage for some of the support WSI formats, such
as R8G8B8A8_UNORM, and looking at the ISL_SURF_USAGE_DISABLE_AUX_BIT,
the imported images do not have any form of compression that would
prevent this fix.
v2: Also consider STORAGE bit for Gralloc usage bits.
(From Kevin Strasser <kevin.strasser@intel.com>)
Fixes: 053d4c328f "anv: Implement VK_ANDROID_native_buffer (v9)"
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
We started using it in the btoi paths for r32g32b32, and the LLVM IR
checker will complain about it because we end up with intrinsics with
the wrong type extension in the name.
Fixes: 593996bc02 ("radv: implement buffer to image operations for R32G32B32")
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Some of the status variables in the compiler are only used in asserts
and thus may be unused in release builds. Annotate them accordingly
to avoid 'unused but set' warnings from the compiler.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Take into account the render target format when checking if the color
mask affects all channels of the RT. This allows to enable full
overwrite in a few cases where a non-alpha format is used.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
The functional change here is moving the nir_lower_io_to_scalar_early()
calls inside st_nir_link_shaders() and moving the st_nir_opts() call
after the call to nir_lower_io_arrays_to_elements().
This fixes a bug with the following piglit test due to the current code
not cleaning up dead code after we lower arrays. This was causing an
assert in the new duplicate varyings link time opt introduced in
70be9afccb.
tests/spec/glsl-1.10/execution/vsfs-unused-array-member.shader_test
Moving the nir_lower_io_to_scalar_early() calls also allows us to tidy
up the code a little and merge some loops.
Reviewed-by: Eric Anholt <eric@anholt.net>
Even without any clever optimization on the unpack operations, this gives
us a useful value for the channels read field, which we can use to avoid
ldtmu instructions to the no-op register.
instructions in affected programs: 890712 -> 881974 (-0.98%)
I've been doing this in the nir-to-vir and nir-to-qir backends of v3d and
vc4, but nir could potentially do some useful stuff for us (like avoiding
unpack/repacks) if we give it the information.
v2: Skip lowering for txs/query_levels
v3: Fix a crash on old-style shadow
v4: Rename to tex_packing, use nir_format_unpack_sint/uint helpers, pack
the enum.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
In 92eb5bbc68 we attempted to avoid copying clear colors whenever
we weren't doing a resolve. However, this broke MSAA resolves because
we need the clear color in the source. This patch makes blorp much more
conservative such that it only avoids the clear color copy if either
aux_usage == NONE or it's explicitly doing a fast-clear.
Fixes: 92eb5bbc68 "intel/blorp: Only copy clear color when doing..."
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107728
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
We can pull a whole vector in a single indirect load. This saves a bunch
of round-trips to the TMU, instructions for setting up multiple loads,
references to the UBO base in the uniforms, and apparently manages to
reduce register pressure as well.
instructions in affected programs: 3086665 -> 2454967 (-20.47%)
uniforms in affected programs: 919581 -> 721039 (-21.59%)
threads in affected programs: 1710 -> 3420 (100.00%)
spills in affected programs: 596 -> 522 (-12.42%)
fills in affected programs: 680 -> 562 (-17.35%)
Improves 3dmmes performance by 2.29312% +/- 0.139825% (n=5)
In the process of adding support for SSBOs and CS shared vars, I ended up
needing a helper function for doing TMU general ops. This helper can be
that starting point, and saves us a bunch of round-trips to the TMU by
loading a vector at a time.
I noticed that a VS I was debugging was missing all of its output stores
-- outputs_written was for POS, VAR0, VAR3, while the shader's variables
were POS, VAR9, and VAR12. I'm not sure what outputs_written is supposed
to be doing here, but we can just walk the declared variables and avoid
both this bug and the emission of extra stvpms for less-than-vec4
varyings.
When copy_prop_vars also took care of dead write handling, intrin was
used as part of store_to_entry. Now it isn't, so this assignment
isn't used really used. Add a comment clarifying what happens to
intrin.
Fixes: 4dfa7adc10 "nir: Remove handling of dead writes from copy_prop_vars"
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Even with the previous commit, hangs are still happening. The problem
there is that the VF cache invalidate do happen immediately without
waiting for previous rendering to complete. What happens is that we
invalidate the cache the moment the PIPE_CONTROL is parsed but we
still have old rendering in the pipe which continues to pull data into
the cache with the old high address bits. The later rendering with the
new high address bits then doesn't have the clean cache that it
expects/needs.
v2: Update commit message/explanation with Jason's
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Fixes: a363bb2cd0 ("i965: Allocate VMA in userspace for full-PPGTT systems.")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109072
Hopefully we can kick start the revolution and other distros will start
providing them as well :)
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
No functional change as the socket name is the same,
just removing the double definition of the path.
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Signed-off-by: Jakob Bornecrantz <jakob@collabora.com>
A 2d-array texture (for example), should get the # of array elements
from box->depth, rather than depth0 which is minified.
Fixes dEQP-GLES3.functional.shaders.texture_functions.texture.sampler2darray_bias_float_fragment
with tiled textures.
Reported-by: Kristian H. Kristensen <hoegsberg@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
If we hit the memcpy() path for copy_region(), that will try to do a
transfer_map(), which goes badly for blits to/from staging triggered
by transfer_map() or transfer_unmap().
We could possibly add fd_blit2() which has allow_transfer_map param,
and call that for staging blits. But I'm not really sure if trying
the blit via copy_region() is very useful. At least for newer gens
that implement fd_context::blit(), it probably isn't.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Switch over to using fd_context::blit(), in the same way that a5xx does.
The previous patch wires fd_resource_copy_region() up to the blitter so
a6xx no longer needs to bypass the core layer to accelerate this.
Signed-off-by: Rob Clark <robdclark@gmail.com>
First step to unify the way fd5 and fd6 blitter works. Currently a6xx
bypasses the blit API in order to also accelerate resource_copy_region()
But this approach can lead to infinite recursion:
#0 fd_alloc_staging (ctx=0x5555936480, rsc=0x7fac485f90, level=0, box=0x7fbab29220) at ../src/gallium/drivers/freedreno/freedreno_resource.c:291
#1 0x0000007fbdebed04 in fd_resource_transfer_map (pctx=0x5555936480, prsc=0x7fac485f90, level=0, usage=258, box=0x7fbab29220, pptrans=0x7fbab29240) at ../src/gallium/drivers/freedreno/freedreno_resource.c:479
#2 0x0000007fbe5c5068 in u_transfer_helper_transfer_map (pctx=0x5555936480, prsc=0x7fac485f90, level=0, usage=258, box=0x7fbab29220, pptrans=0x7fbab29240) at ../src/gallium/auxiliary/util/u_transfer_helper.c:243
#3 0x0000007fbde2dcb8 in util_resource_copy_region (pipe=0x5555936480, dst=0x7fac485f90, dst_level=0, dst_x=0, dst_y=0, dst_z=0, src=0x7fac47c780, src_level=0, src_box_in=0x7fbab2945c) at ../src/gallium/auxiliary/util/u_surface.c:350
#4 0x0000007fbdf2282c in fd_resource_copy_region (pctx=0x5555936480, dst=0x7fac485f90, dst_level=0, dstx=0, dsty=0, dstz=0, src=0x7fac47c780, src_level=0, src_box=0x7fbab2945c) at ../src/gallium/drivers/freedreno/freedreno_blitter.c:173
#5 0x0000007fbdf085d4 in fd6_resource_copy_region (pctx=0x5555936480, dst=0x7fac485f90, dst_level=0, dstx=0, dsty=0, dstz=0, src=0x7fac47c780, src_level=0, src_box=0x7fbab2945c) at ../src/gallium/drivers/freedreno/a6xx/fd6_blitter.c:587
#6 0x0000007fbde2f3d0 in util_try_blit_via_copy_region (ctx=0x5555936480, blit=0x7fbab29430) at ../src/gallium/auxiliary/util/u_surface.c:864
#7 0x0000007fbdec02c4 in fd_blit (pctx=0x5555936480, blit_info=0x7fbab29588) at ../src/gallium/drivers/freedreno/freedreno_resource.c:993
#8 0x0000007fbdf08408 in fd6_blit (pctx=0x5555936480, info=0x7fbab29588) at ../src/gallium/drivers/freedreno/a6xx/fd6_blitter.c:546
#9 0x0000007fbdebdc74 in do_blit (ctx=0x5555936480, blit=0x7fbab29588, fallback=false) at ../src/gallium/drivers/freedreno/freedreno_resource.c:129
#10 0x0000007fbdebe58c in fd_blit_from_staging (ctx=0x5555936480, trans=0x7fac47b7e8) at ../src/gallium/drivers/freedreno/freedreno_resource.c:326
#11 0x0000007fbdebea38 in fd_resource_transfer_unmap (pctx=0x5555936480, ptrans=0x7fac47b7e8) at ../src/gallium/drivers/freedreno/freedreno_resource.c:416
#12 0x0000007fbe5c5c68 in u_transfer_helper_transfer_unmap (pctx=0x5555936480, ptrans=0x7fac47b7e8) at ../src/gallium/auxiliary/util/u_transfer_helper.c:516
#13 0x0000007fbde2de24 in util_resource_copy_region (pipe=0x5555936480, dst=0x7fac485f90, dst_level=0, dst_x=0, dst_y=0, dst_z=0, src=0x7fac47b8e0, src_level=0, src_box_in=0x7fbab2997c) at ../src/gallium/auxiliary/util/u_surface.c:376
#14 0x0000007fbdf2282c in fd_resource_copy_region (pctx=0x5555936480, dst=0x7fac485f90, dst_level=0, dstx=0, dsty=0, dstz=0, src=0x7fac47b8e0, src_level=0, src_box=0x7fbab2997c) at ../src/gallium/drivers/freedreno/freedreno_blitter.c:173
#15 0x0000007fbdf085d4 in fd6_resource_copy_region (pctx=0x5555936480, dst=0x7fac485f90, dst_level=0, dstx=0, dsty=0, dstz=0, src=0x7fac47b8e0, src_level=0, src_box=0x7fbab2997c) at ../src/gallium/drivers/freedreno/a6xx/fd6_blitter.c:587
...
Instead rework the API to push the fallback back to core code, so that
we can rework resource_copy_region() to have it's own fallback path,
and then finally convert fd6 over to work in the same way.
This also makes ctx->blit() optional, and cleans up some unnecessary
callers.
Signed-off-by: Rob Clark <robdclark@gmail.com>
For multi-pass rendering, it is common to keep the same depth buffer
from previous pass, to discard geometry that would be hidden by later
draws. In the later passes with depth-test enabled, but depth-write
disabled, there is no reason to do gmem2mem resolve.
TODO probably do something similar for stencil.. although stencil
buffer isn't used as commonly these days
Signed-off-by: Rob Clark <robdclark@gmail.com>
After trying multiple times to merge if-statements with phis
between them I've come to the conclusion that it cannot be done
without regressions. The problem is for some shaders we end up
with a whole bunch of phis for the merged ifs resulting in
increased register pressure.
So this patch just merges ifs that have no phis between them.
This seems to be consistent with what LLVM does so for radeonsi
we only see a change (although its a large change) in a single
shader.
Shader-db results i965 (SKL):
total instructions in shared programs: 13098176 -> 13098152 (<.01%)
instructions in affected programs: 1326 -> 1302 (-1.81%)
helped: 4
HURT: 0
total cycles in shared programs: 332032989 -> 332037583 (<.01%)
cycles in affected programs: 60665 -> 65259 (7.57%)
helped: 0
HURT: 4
The cycles estimates reported by shader-db for i965 seem inaccurate
as the only difference in the final code is the removal of the
redundent condition evaluations and jumps.
Also the biggest code reduction (~7%) for radeonsi was in a tomb
raider tressfx shader but for some reason this does not get merged
for i965.
Shader-db results radeonsi (VEGA):
Totals from affected shaders:
SGPRS: 232 -> 232 (0.00 %)
VGPRS: 164 -> 164 (0.00 %)
Spilled SGPRs: 59 -> 59 (0.00 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Private memory VGPRs: 0 -> 0 (0.00 %)
Scratch size: 0 -> 0 (0.00 %) dwords per thread
Code Size: 14584 -> 13520 (-7.30 %) bytes
LDS: 0 -> 0 (0.00 %) blocks
Max Waves: 13 -> 13 (0.00 %)
Wait states: 0 -> 0 (0.00 %)
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Before, I had per-stage entryoints with some helpers shared between them.
As I extended for compute shaders and shader-db, it turned out that the
other common code in the middle wanted to be shared too.
Loops will be trickier, since we need some analysis to figure out if the
breaks/continues inside are uniform. Until we get that in NIR, this gets
us some quick wins.
total instructions in shared programs: 6192844 -> 6174162 (-0.30%)
instructions in affected programs: 487781 -> 469099 (-3.83%)
I wanted to reuse the comparison stuff for nir_ifs, but for that I just
want the flags and no destination value. Splitting the conditions from
the destinations ended up cleaning the existing code up, anyway.
We'll still fail at draw time, but this avoids a regression in shader-db
execution once I enable TLB writes in precompiles.
Fixes: b38e4d313f ("v3d: Create a state uploader for packing our shaders together.")
Makes debugging easier when we care about the deref chain and not the
deref instruction itself. To make it take a const pointer, constify
some of the static functions in nir_print.c.
Reviewed-by: Eric Anholt <eric@anholt.net>
Nouveau requires rtti. Often LLVM is configured without rtti, and code
with and without cannot be linked safely. Lets just error out if nouveau
is requested and llvm is built without rtti.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109202
Fixes: c5a97d658e
("meson: fix builds against LLVM built without rtti")
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The 16-bit polynomial execution doesn't meet Khronos precision requirements.
Also, the half-float denorm range starts at 2^(-14) and with asin taking input
values in the range [0, 1], polynomial approximations can lead to flushing
relatively easy.
An alternative is to use the atan2 formula to compute asin, which is the
reference taken by Khronos to determine precision requirements, but that
ends up generating too many additional instructions when compared to the
polynomial approximation. Specifically, for the Intel case, doing this
adds +41 instructions to the program for each asin/acos call, which looks
like an undesirable trade off.
So for now we take the easy way out and fallback to using the 32-bit
polynomial approximation, which is better (faster) than the 16-bit atan2
implementation and gives us better precision that matches Khronos
requirements.
v2:
- Fallback to 32-bit using recursion (Jason).
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v2:
- use nir_fadd_imm and nir_fmul_imm helpers (Jason)
v3:
- since we need to define one for fsub use it for fdiv too (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v2:
- fix huge_val for 16-bit, it was mean't to be 2^14 not 10^14.
v3:
- rebase on top of new bool sized opcodes
- use nir_b2f helper
- use nir_fmul_imm helper
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v2:
- use nir_fadd_imm and nir_fmul_imm helpers (Jason)
- rebased on top of new sized boolean opcodes
- use nir_b2f helper
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v2:
- use nir_fmul_imm and nir_fadd_imm helpers (Jason)
v3:
- missed one case where we need to replace nir_imm_float
with nir_imm_floatN_t (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This just cleans things up a little and make things more safe for
derefs.
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
The following patches will add support for an additional
optimisation so this function will no longer just optimise varying
constants.
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This will help the new opt introduced in the following patches
allowing us to remove extra duplicate varyings.
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
The following patch will use this with the radeonsi NIR backend
but I've added it to ac so we can use it with RADV in future.
This is a NIR implementation of the tgsi function
tgsi_scan_tess_ctrl().
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The previous code used a do while loop and continues after walking
a nested loop/if-statement. This means we end up evaluating the
last instruction from the nested block against the while condition
and potentially exit early if it matches the exit condition of the
outer block.
Fixes: 386d165d8d ("tgsi/scan: add a new pass that analyzes tess factor writes")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This just happened not to crash/assert because all loops have at
least 1 if-statement and due to a second bug we end up matching
the same ENDIF to exit both the iteration over the if-statment
and the loop.
The second bug is fixed in the following patch.
Fixes: 386d165d8d ("tgsi/scan: add a new pass that analyzes tess factor writes")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
There's no way to tell the 3D engine about swizzling on such textures.
While rendering to NPOT ones may be possible, there's no great way to
expose that in gallium, nor would there be any practical benefit.
Fixes the non-compressed-format "copyteximage 3D" failures. Something
odd going on with the compressed formats.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
This caused random failures for two conditional rendering tests:
dEQP-VK.conditional_rendering.draw_clear.draw.update_with_rendering_discard
dEQP-VK.conditional_rendering.draw_clear.draw.update_with_rendering_no_discard
These wrote the predicate with the vertex shader, did a barrier and then
started the conditional rendering. However the cache flushes for the barrier
only happen on first draw, so after the predicate has been read.
Fixes: e45ba51ea4 "radv: add support for VK_EXT_conditional_rendering"
Reviewed-by: Dave Airlie <airlied@redhat.com>
Without this, I get the following error when building the tests with
autotools on i686:
---8<---
src/intel/common/gen_clflush.h: In function ‘gen_clflush_range’:
src/intel/common/gen_clflush.h:37:7: warning: implicit declaration of function ‘__builtin_ia32_clflush’; did you mean ‘__builtin_ia32_pause’? [-Wimplicit-function-declaration]
__builtin_ia32_clflush(p);
^~~~~~~~~~~~~~~~~~~~~~
__builtin_ia32_pause
src/intel/common/gen_clflush.h: In function ‘gen_flush_range’:
src/intel/common/gen_clflush.h:45:4: warning: implicit declaration of function ‘__builtin_ia32_mfence’; did you mean ‘__builtin_ia32_fnclex’? [-Wimplicit-function-declaration]
__builtin_ia32_mfence();
^~~~~~~~~~~~~~~~~~~~~
__builtin_ia32_fnclex
---8<---
The erros are generated for each of these files:
- mesa/src/intel/vulkan/tests/state_pool_no_free.c
- mesa/src/intel/vulkan/tests/state_pool.c
- mesa/src/intel/vulkan/tests/block_pool_no_free.c
- mesa/src/intel/vulkan/tests/state_pool_free_list_only.c
This is obviously because gen_clflush.h contains code that uses
intrinsics that are only available with SSE3. Since the driver already
uses SSE3, it seems reasonable to add this to the tests as well.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Acked-by: Eric Engeström <eric@engestrom.ch>
Without this, I get the following error when building the tests using
meson on i686:
---8<---
In file included from ../../../mesa/src/intel/vulkan/anv_private.h:46,
from ../../../mesa/src/intel/vulkan/tests/state_pool_no_free.c:26:
../../../mesa/src/intel/common/gen_clflush.h: In function ‘gen_clflush_range’:
../../../mesa/src/intel/common/gen_clflush.h:37:7: error: implicit declaration of function ‘__builtin_ia32_clflush’; did you mean ‘__builtin_ia32_pause’? [-Werror=implicit-function-declaration]
__builtin_ia32_clflush(p);
^~~~~~~~~~~~~~~~~~~~~~
__builtin_ia32_pause
../../../mesa/src/intel/common/gen_clflush.h: In function ‘gen_flush_range’:
../../../mesa/src/intel/common/gen_clflush.h:45:4: error: implicit declaration of function ‘__builtin_ia32_mfence’; did you mean ‘__builtin_ia32_fnclex’? [-Werror=implicit-function-declaration]
__builtin_ia32_mfence();
^~~~~~~~~~~~~~~~~~~~~
__builtin_ia32_fnclex
---8<---
The errors are generated for each of these files:
- mesa/src/intel/vulkan/tests/state_pool_no_free.c
- mesa/src/intel/vulkan/tests/state_pool.c
- mesa/src/intel/vulkan/tests/block_pool_no_free.c
- mesa/src/intel/vulkan/tests/state_pool_free_list_only.c
This is obviously because gen_clflush.h contains code that uses
intrinsics that are only available with SSE3. Since the driver already
uses SSE3, it seems reasonable to add this to the tests as well.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Eric Engeström <eric@engestrom.ch>
s3tc layouts are a bit finicky - they're packed, but not swizzled.
Adjust logic to allow for that case:
- Don't set a uniform pitch for POT-sized compressed textures
- Adjust define_rect API to be less confused about block sizes
- Only mark a texture as linear if it has a uniform pitch set
This has been tested to fix xonotic (as well as the s3tc-* piglits)
on nv3x and keeps it working on nv4x.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
This doesn't matter since all compressed formats supported by this
hardware use square blocks, but best to use the correct helper.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
This logic mirrors what we do on nv50. The relatively new
texture_subdata callback can cause this to happen with 3D textures,
which is triggered at least by xonotic, and probably many piglits.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
If the last-active context gets deleted, the pushbuf doesn't have a
bufctx to reference. Then there could be a sequence of binds which would
trigger a reset on that bin before validation was done. Instead we just
pass in the bufctx in question directly.
All other instances of PUSH_RESET happen strictly after a validation is
run.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102349
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
The whole user_priv thing is a mess, but as long as it's there, it
basically has to map 1:1 to the cur_ctx. Unfortunately we were setting
user_priv to some context, then that context could get deleted without
any draws/validations in it, leading user_priv to become NULL, with
cur_ctx still pointing at some old context. Then we wouldn't run the
switch logic, which in turn led to a NULL bufctx being dereferenced.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102349
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
We can just look at the MSF flags -- if they're unset, then we're
definitely in a helper invocation. Fixes
dEQP-GLES31.functional.shaders.helper_invocation.* with GLES3.1 enabled.
This is what the GLSL ES 310 spec tells us to do, but apparently the
"gather mode" flag doesn't imply it in the HW. Fixes
dEQP-GLES31.functional.texture.gather.basic.2d.rgba8.filter_mode.min_nearest_mipmap_linear_mag_linear
The greedy comparison folding in bcsel means that we may have left the
original bool-generating NIR ALU instruction dead, but DCE wasn't
eliminating the VIR code for it because of the flags updates.
total instructions in shared programs: 5186024 -> 5100894 (-1.64%)
instructions in affected programs: 1448695 -> 1363565 (-5.88%)
This allows the original shader-db project's run.c runner to parse things
easily, and is probably a good thing to have for GL_ARB_debug_output in
general. I formatted it more like Intel's so I can mostly reuse their
report script.
I've been using my apitrace-based shader-db so far, but it's slow
(apitrace decompression), intrusive (apitrace windows spamming the
screen), and doesn't have much coverage. The original shader-db provides
a lot more coverage and compiles faster, at the expense of not having the
actual runtime variant key. As v3d has a lot less runtime variation than
vc4 did, this tradeoff makes more sense.
It's better to let most applications make use of adaptive sync
by default. Problematic applications can be placed on the blacklist
or the user can manually disable the feature.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
The DDX driver can be notified of adaptive sync suitability by
flagging the application's window with the _VARIABLE_REFRESH property.
This property is set on the first swap the application performs
when adaptive_sync is set to true in the drirc.
It's performed here instead of when the loader is initialized for
two reasons:
(1) The window's drawable can be missing during loader init.
This can be observed during the Unigine Superposition benchmark.
(2) Adaptive sync will only be enabled closer to when the application
actually begins rendering.
If adaptive_sync is false then the _VARIABLE_REFRESH property
is deleted on loader init.
The property is only managed on the glx DRI3 backend for now. This
should cover most common applications and games on modern hardware.
Vulkan support can be implemented in a similar manner but would likely
require splitting the function out into a common helper function.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Applications that don't present at a predictable rate (ie. not games)
shouldn't have adapative sync enabled. This list covers some of the
common desktop compositors, web browsers and video players.
[ Michel Dänzer: Added entry for firefox-esr ]
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
This option lets the user decide whether mesa should notify the
window manager / DDX driver that the current application is adaptive
sync capable.
It's off by default.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Some programs start with the path and command line arguments in
argv[0] (program_invocation_name). Chromium is an example of
an application using mesa that does this.
This tries to query the real path for the symbolic link /proc/self/exe
to find the program name instead. It only uses the realpath if it
was a prefix of the invocation to avoid breaking wine programs.
Cc: Timothy Arceri <tarceri@itsqueeze.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
We were leaking surfaces because the references taken in
etna_set_framebuffer_state weren't being released on context destroy.
Instead of just directly releasing those references in
etna_context_destroy, use the util_copy_framebuffer_state helper.
Take the chance to remove the duplicated buffer references in
compiled_framebuffer_state to avoid confusion.
The leak can be reproduced with a client that continuously creates and
destroys contexts.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reported-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Older versions of virglrenderer before 33da7361aec486290df0aec4ad8dfa8ff6adde2c
in vtest mode, misrender gears.
Fixes: 9d81cd8e7c (virgl: Pass resource size and transfer offsets)
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
I know it's not what anyone wants, but how about we start with a
message in the documentation that encourages people to try meson.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Eric Engeström <eric@engestrom.ch>
Note that meson requires python 3, scons requires python 2, and
autotools works with either.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Eric Engeström <eric@engestrom.ch>
ATOMFADD is a little special -- make drivers have to specify it
explicitly.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This is supported by at least NVIDIA hardware, and exposeable via GL
extensions.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We need a 64-bit value, otherwise we only handle the low 32, and happen to
sign-extend to claim to write all varying slots if VARYING_SLOT_VAR2 was
used.
Fixes: 4d0b2c7aaa ("ttn: Update shader->info as we generate code.")
Reviewed-by: Rob Clark <robdclark@gmail.com>
We've made the choice not to use fast clears on layer > 0 with
multilayer images. This is partly because we would need to store
multiple clear colors for each layer, making the existing memory
layout, already including aux surfaces, fast clear color, image state,
etc... even more complex.
Partial resolves are the operations transfering the clear colors into
the auxiliary buffers. This operation is currently implemented in
Blorp by loading the clear color from the image's BO, into a shader
that then samples from the auxiliary buffer and writes the color only
if it isn't there already.
The problem here is that because we store only one clear color for all
layers and it is used for partial resolves. If you trigger a partial
clear on a layer > 0, then you're likely to deal with a color that is
not what you actually want. In the particular issues below, we have
multiple layers, each cleared with a different color but the partial
resolve just writes the wrong color into the auxiliary buffers for
layers > 0.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108910
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108911
Cc: mesa-stable@lists.freedesktop.org
100 is too small for some games, which triggers recompilations
every frame. Increase to 1024.
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
nine_context_box_upload uploads a ram buffer (from src)
to a pipe_resource (dst).
We already have a refcount on the pipe_resource,
what needs to be protected from release is the ram buffer,
thus a reference to src.
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Cc: mesa-stable@lists.freedesktop.org
This enables to match the window size
on resize on all cases, as it only works
currently with presentation buffers.
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
This patch introduces a structure to release the
present_handles only when they are fully released
by the server, thus making
"DestroyD3DWindowBuffer" actually release the buffer
right away when called.
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
This logic can be re-written as the two cases for 3d (ie. before/after
the miplevel sizes start reducing) vs everything else. I think it is
easier to read this way.
Signed-off-by: Rob Clark <robdclark@gmail.com>
This was a hold-over from the early TGSI days, and mostly not needed
with NIR. This avoids burning an entire 4 consecutive scalar regs
for vec3 outputs, for example. Which fixes a few places that we were
doing worse that we should on register usage.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Fixes the following crash that happened after d6110d4d
The problem happens if we first compile a "vanilla" shader with nothing
lowered in NIR, which perform the final lowering passes on so->shader->
nir (including nir_lower_locals_to_regs()), and then later we have
compile a shader with some lowering. The second time through we would
have already done nir_lower_locals_to_regs().
Arguably this was already a bug, just one we hadn't noticed yet.
Fixes: d6110d4d54 intel/compiler: move nir_lower_bool_to_int32 before nir_lower_locals_to_regs
Signed-off-by: Rob Clark <robdclark@gmail.com>
DrawPixels lowering, for example, adds new varyings that need to be
accounted for in inputs_read. The earlier info gathering at link time
cannot account for this.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The glDrawPixels passthrough vertex shader copies position and texcoord
vertex attributes to varying outputs. It also optionally copies a third
gl_Color attribute, which sometimes is unnecessary. Until now, we've
compiled separate variants of the shader, one of which does this extra
copy, and the other of which doesn't. We have done this since 2007.
But, the vertex shader runs for a whopping four vertices, and so the
cost of a copying a single input to output is likely inconsequential.
In theory, we could bind one fewer vertex element - but we always bind
all three regardless. So, we don't even get that savings.
This patch unifies the two, so we always copy the optional color,
and save having to compile the variant. It also makes the VS input
interface match up with the vertex element state without any dead
(unused) input attributes.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
So that gitlab will render the < and > correctly allowing the tag to be
copy-n-pasted without additional formatting.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Whenever llvm removes an intrinsic (we're using), we're hitting segfaults
due to llvm doing calls to address 0 in the jitted code instead.
However, Jose figured out we can actually detect this with
LLVMGetIntrinsicID(), so use this to abort, so we don't have to wonder
what got broken. (Of course, someone still needs to fix the code to
no longer use this intrinsic.)
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
This intrinsic disppeared with llvm 6.0, using it ends up in segfaults
(due to llvm issuing call to NULL address in the jited shaders).
Add code doing the same thing as the autoupgrade code in llvm so it
can be matched and replaced back with a pavgb.
While here, also improve lp_test_format, so it tests both with and without
cache (as it was, it tested the cache versions only, whereas cache is
actually disabled in llvmpipe, and in any case even with it enabled
vertex and geometry shaders wouldn't use it). (Although at least for
the unorm8 uncached fetch, the code is still quite different to what
llvmpipe is using, since that would use unorm8x16 type, whereas
the test code is using unorm8x4 type, hence disabling some intrinsic
paths.)
Fixes: 6f4083143b ("gallivm: use llvm jit code for decoding s3tc")
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
This commit adds a number of build combinations:
- Gallium Drivers {SWR, RadeonSI, Others)
Each one has different LLVM requirements. Building SWR alone is twice
as slow as all other drivers combined.
- Gallium ST Clover LLVM {5,6,7}
Because C++ API changes all the time. Analogous to above building
Clover takes as much time as building all other ST combined.
- Gallium ST Others
Nouveau is used, instead of i915g since meson has explicit target
tracking. Meaning that a configure error is thrown if we use i915g
with say va, vdpau or others.
Note: LLVM prior to 5.0 is intentionally dropped. If needed we can add
that later.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
This is the supported way to do this, and should be more robust and
reliable.
v2: [Emil]
- enable backslash escapes
- don't hardcode the path
- pass the argument directly to meson
Reviewed-by: Emil Velikov <emil.velikov@collabora.com> (v1)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
The latter is the default these days and Travis will be removing sudo
soonish.
Flipping to xenial, allows us to remove a bunch of hacks we have. Plus
it prevents us from adding new ones, to workaround what seems like a
gcc/binutils bug. For example (from the upcoming meson build):
FAILED: ccache c++ -o src/gallium/targets/pipe-loader/pipe_r600.so ...
... src/util/libmesa_util.a ... /usr/lib/x86_64-linux-gnu/libz.so ...
src/util/libmesa_util.a(disk_cache.c.o): In function `deflate_and_write_to_disk':
_build/../src/util/disk_cache.c:746: undefined reference to `deflateInit_'
_build/../src/util/disk_cache.c:765: undefined reference to `deflate'
...
As we can see, even though libz.so is explicitly passed after the
object that requires it - the linker still fails to see the symbols.
Avoid all those situations - flip the switch.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Seemingly with LLVM7 and GCC 5.0, the former won't properly advertise
-std=c++11 and the latter will choke.
dd this temporary workaround, otherwise we'll get errors like:
In file included from /usr/include/c++/5/type_traits:35:0,
from /usr/lib/llvm-7/include/llvm/Support/type_traits.h:18,
from /usr/lib/llvm-7/include/llvm/ADT/Optional.h:22,
from /usr/lib/llvm-7/include/llvm/ADT/STLExtras.h:20,
from /usr/lib/llvm-7/include/llvm/ADT/StringRef.h:13,
from /usr/lib/llvm-7/include/llvm/Target/TargetMachine.h:17,
from ../../../src/amd/common/ac_llvm_helper.cpp:36:
/usr/include/c++/5/bits/c++0x_warning.h:32:2: error: #error This file requires compiler and library support for the ISO C++ 2011 standard. This support must be enabled with the -std=c++11 or -std=gnu++11 compiler options.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Swap '..' with the symbolic inc_glx and add glproto as dependency. That
will pull the correct include, effectively fixing the tests on macOS.
Fixes: a47c525f32 ("meson: build glx")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
When producing the final libGL.so/libGLX_mesa.so we only link the local
static helper lib (libglx). Thus there's no reason for the includes.
Fixes: a47c525f32 ("meson: build glx")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
The library itself (libGL) is only built when -Dglx=dri, yet it's
accompanying tests are build even with -Dglx=xlib.
Adjust the guards, so we don't build the tests when they are not
applicable
v2:
- Reword commit message (Dylan)
- Drop build_by_default hunk (Dylan)
Fixes: a47c525f32 ("meson: build glx")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
The gallium drivers do not require a DRI loader. Drop the artificial
and unnecessary restriction.
Fixes: af9d276134 ("meson: build libmesa_gallium")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Currently our is_sha_nomination does:
- folds any whitespace, attempting to extract sha-like information
- checks that at least one of the shas has landed
Split it in two and do sha-like validation first.
This way, commits with mesa-stable and sha nominations will feature the
fixes/revert/etc instead of stable (a) or will be omitted if not
applicable for the respective branch (b).
Misc examples from 18.3
(a)
-[ stable ] 5bc509363b glx: make xf86vidmode mandatory for direct rendering
+[ fixes ] 5bc509363b glx: make xf86vidmode mandatory for direct rendering
(b)
-[ stable ] 9a7b319903 anv/query: flush render target before copying results
CC: Juan A. Suarez <jasuarez@igalia.com>
CC: Dylan Baker <dylan@pnwbakers.com>
CC: mesa-stable@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
This lets the driver use pipe_debug_message() for GL_ARB_debug_output.
Signed-off-by: Rhys Kidd <rhyskidd@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This lets the driver use pipe_debug_message() for GL_ARB_debug_output.
Signed-off-by: Rhys Kidd <rhyskidd@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
i915 render nodes refuse the dumb ioctls, so the simulator would crash on
the original non-apitrace shader-db. Replace them with direct i915 calls
if we detect that we're on one of their gem fds.
Because of the many caveats involved, using -Dc_args instead of CFLAGS
is recommended both by meson upstream and by us.
v2: - Fix typo
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> (v1)
Reviewed-by: Eric Anholt <eric@anholt.net>
We don't ever want to do the fmask lookup on a atomic or
store, the fmask should have been decompressed if the
surface has been moved to IMAGE_LAYOUT.
Original patch by Dave Airlie.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This fixes GPU hangs on GFX9 with
dEQP-VK.memory.external_memory_host.bind_image_memory_and_render.with_zero_offset.*
Copied from RadeonSI.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Exactly what title says, the new addrlib does not allow the above with
certain dimensions that the CTS seems to hit. Work around it by not
allowing the app to render to it via compat with other 128bpp formats
and do not render to it ourselves during copies.
Fixes: 776b911365 "amd/addrlib: update Mesa's copy of addrlib"
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
The driver needs to decompress all image layers if a fast
depth/color clear has been performed.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This workaround has been introduced by 135e4d434f for fixing
DXVK GPU hangs with many games. It is no longer needed since
LLVM r345718.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The former expects to see SSA-only things, but the latter injects registers.
The assertions in the lowering where not seeing this because they asserted
on the bit_size values only, not on the is_ssa field, so add that assertion
too.
Fixes: 11dc130779 "nir: Add a bool to int32 lowering pass"
CC: mesa-stable@lists.freedesktop.org
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
A long time ago, when this was first implemented, not having a sampler
bound would cause problems on Fermi. I didn't work out the reasons, but
the solution was simple -- just put the samplers back in.
Since then, regular texturing paths appear to have lost their associated
samplers which required a fuller investigation and fix in nouveau. Now
that this is done, this code should no longer need a sampler state for
fetching texels from a buffer texture.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This is (much) faster than using the util fallback.
(Note that there's two methods here, one would use a cache, similar to
the existing code (although the cache was disabled), except the block
decode is done with jit code, the other directly decodes the required
pixels. For now don't use the cache (being direct-mapped is suboptimal,
but it's difficult to come up with something better which doesn't have
too much overhead.)
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
An earlier patch that introduced the function failed to handle the case
where an image format layout qualifier is not specified, which is allowed
on desktop GL profiles. In these cases, nir_variable's image format is
GL_NONE, and we don't need to print a debug message for those.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Across several projects I've seen new contributors say "I wasn't sure if I
should provide a review tag since I'm not really an expert in this area."
Everyone I know already applies some implicit weighting to reviews from
different people, so encourage participation.
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This calls the expensive uif offset function once per utile, but it still
gets us a 212.218% +/- 2.41216% (n=10) win on 1024x1024 glTexImage over
calling it on each pixel.
This lets us store the non-PBO glTexImage data directly into the tiled
image without making an extra untiled memcpy for the gallium transfer.
Improves 1024x1024 TexImage perf by ~19%, mostly from not thrashing around
in the kernel mapping and unmapping the transfer's temporary area.
We're waiting for the jobs-completed count to increment (with wrapping),
not to reach its starting state. This mostly ended up working out because
the next v3d_hw_tick() for a submit CL would end up doing the TFU
operation first, but it did fail when a blit was used for glReadPixels()
at the end of a test.
Fixes: ee0549ff9a ("v3d: Add the V3D TFU submit interface to the simulator.")
In the UAPI, the first BO is the destination, and the one the kernel
should do an exclusive reservation on. Currently we only do exclusive
reservations, anyway. However, in the simulator path I was only copying
back the "destination" BO (actually src in this case), and this caused
regressions once I fixed the simulator to actually complete TFU before
returning (since otherwise, the TFU op would happen at the start of the
next CL submit and the draw would get the right contents).
Fixes: 976ea90bdc ("v3d: Add support for using the TFU to do some blits.")
When copy propagation handles a store/copy, it iterates the current
copy entries to remove aliases, but keeps the "equal" entry (if
exists) to be updated.
The removal step may swap the entries around (to ensure there are no
holes), invalidating previous iteration pointers. The bug was saving
such pointer to use later. Change the code to first perform the
removals and then find the remaining right entry.
This was causing updates to be lost since they were being made to an
entry that was not part of the current copies.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108624
Fixes: b3c6146925 "nir: Copy propagation between blocks"
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Fixes build failure if the LLVM headers aren't in a standard include
directory.
Fixes: ec22dd34c8 "radeonsi: move SI_FORCE_FAMILY functionality to
winsys"
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
When updating a copy entry source value from a "non-SSA" (the data
come from a copy instruction) to a "SSA" (the data or parts of it come
from SSA values), it was possible to hold invalid data in ssa[0]
depending on the writemask. Because the union, ssa[0] could contain a
pointer to a nir_deref_instr left-over from previous non-SSA usage.
Change code to clean up the array before use to avoid invalid data
around.
Fixes: 62332d139c "nir: Add a local variable-based copy propagation pass"
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Previously, we ignored the the glUnmap(..) operation and
flushed before we flush the cbuf. Now, let's just flush
the data when we unmap.
Neither method is optimal, for example:
glMapBufferRange(.., 0, 100, GL_MAP_FLUSH_EXPLICIT_BIT)
glFlushMappedBufferRange(.., 25, 30)
glFlushMappedBufferRange(.., 65, 70)
We'll end up flushing 25 --> 70. Maybe we can fix this later.
v2: Add fixme comment in the code (Elie)
Reviewed-by: Elie Tournier <elie.tournier@collabora.com>
With commit 89b479, we moved to tracking buffer cleanliness
when binding.
TEST=dEQP-GLES31.functional.image_load_store.buffer.load_store.r32ui
Reviewed-by: Elie Tournier <elie.tournier@collabora.com>
Remove a level of indirection to make the code more explicit -- should
make it easier to follow what's going on.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This is a move towards using composition instead of inheritance for
different query types.
This change weakens out-of-memory error reporting somewhat, though this
should be acceptable since we didn't consistently report such errors in
the first place.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Order-aware scan/reduce can trade-off LDS traffic for external atomics
memory traffic in producer/consumer compute shaders.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The following race condition could occur in the no-timeout case:
API thread Gallium thread Watchdog
---------- -------------- --------
dd_before_draw
u_threaded_context draw
dd_after_draw
add to dctx->records
signal watchdog
dump & destroy record
execute draw
dd_after_draw_async
use-after-free!
Alternatively, the same scenario would assert in a debug build when
destroying the record because record->driver_finished has not signaled.
Fix this and simplify the logic at the same time by
- handing the record pointers off to the watchdog thread *before* each
draw call and
- waiting on the driver_finished fence in the watchdog thread
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This fulfills a requirement for clients that want to utilize same
code path for images with external formats (VK_FORMAT_UNDEFINED) and
"regular" RGBA images where format is known. This is similar to how
OES_EGL_image_external works.
To support this, we allow color conversion samplers for non-YUV
formats but skip setting up conversion when format does not have
can_ycbcr flag set.
v2: add comment and bundle can_ycbcr to the existing break
condition (Lionel)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
If a conversion struct was passed, then initialize view using
format from the conversion structure.
v2: use vk_format directly from the anv_format struct
v3: added some assertions (Lionel)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
If external format is used, we store the external format identifier in
conversion to be used later when creating VkImageView.
v2: rebase to b43f955037 changes
v3: added assert, ignore components when creating external
format conversion (Lionel)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Since we don't know the exact format at creation time, some initialization
is done only when bound with memory in vkBindImageMemory.
v2: demand dedicated allocation in vkGetImageMemoryRequirements2 if
image has external format
v3: refactor prepare_ahw_image, support vkBindImageMemory2,
calculate stride correctly for rgb(x) surfaces, rename as
'resolve_ahw_image'
v4: rebase to b43f955037 changes
v5: add some assertions to verify input correctness (Lionel)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
v2: have separate memory properties for android, set usage
flags for buffers correctly
v3: code cleanup (Jason)
+ limit maxArrayLayers to 1 for AHardwareBuffer based images
v4: rebase to b43f955037 changes
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
v2: add support for non-image buffers (AHARDWAREBUFFER_FORMAT_BLOB)
v3: properly handle usage bits when creating from image
v4: refactor, code cleanup (Jason)
v5: rebase to b43f955037 changes,
initialize bo flags as ANV_BO_EXTERNAL (Lionel)
v6: add assert that anv_bo_cache_import succeeds, add comment
about multi-bo support to clarify current implementation (Lionel)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This makes it cleaner to introduce more cases where we import memory
from different types of external memory buffers.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Use the anv_format address in formats table as implementation-defined
external format identifier for now. When adding YUV format support this
might need to change.
v2: code cleanup (Jason)
v3: set anv_format address as identifier
v4: setup suggestedYcbcrModel and suggested[X|Y]ChromaOffset
as expected for HAL_PIXEL_FORMAT_NV12_Y_TILED_INTEL
v5: set linear tiling for GPU_DATA_BUFFER usage, add comment
about multi-bo support to clarify current implementation (Lionel)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
v2: handle R8G8B8X8 as R8G8B8_UNORM (Jason)
v3: add HAL_PIXEL_FORMAT_NV12_Y_TILED_INTEL, we make it define
for now to avoid direct dependency to minigbm headers
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This will make it possible for next patch to rip
anv_image_create_info out from make_surface function.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
The quotation marks around 1.0 cause it to be treated as a string
instead of a floating point value. The generator then treats it as an
arbitrary variable replacement, so any iand involving a ('ineg', ('b2i',
a)) matches.
v2: Remove misleading comment about sized literals (suggested by
Timothy). Add assertion that the name of a varible is entierly
alphabetic (suggested by Jason).
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: Timothy Arceri <tarceri@itsqueeze.com> [v1]
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com> [v1]
Fixes: 6bcd2af086 ("nir/algebraic: Add some optimizations for D3D-style Booleans")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109075
Tested on gen9.
v2: Rename lower_txd_3d_surafaces flag to lower_txd_3d (Jason Ekstrand)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Note that we have an official GL extension number, pick the appropriate
section of the GLX spec to modify, and add changelog.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This has not even had an attempt at implementation. If you asked for
renderer 0 - which, the spec implies, should always work - then
dri2_convert_glx_attribs would fail, we'd silently fall back to creating
an indirect context, and xserver would also not recognize the attribute
and would throw BadValue at you.
The API would be difficult to use in any case, since there's no way to
enumerate how many renderers the screen has. I'd be tempted to add that
by defining:
glXQueryRendererIntegerMESA(dpy, screen,
/* renderer = */ -1,
0, &value);
to return the number of renderers, but a new entrypoint might be
cleaner. Still, better to not specify it at all than to lie about it.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
In one place we say, if GLES isn't supported then the profile version
will be 0.0. Then later we say, if the GLES profile extension isn't
supported then GLX_RENDERER_OPENGL_ES_PROFILE_VERSION_MESA is not
mentioned in the spec. A strict reading of the latter would mean that
GLX_RENDERER_OPENGL_ES_PROFILE_VERSION_MESA is not a recognized token,
and the query should instead return False.
The implementation does not check for the GLES profile extensions, and
the additional complexity doesn't seem worth it. Removing the
interaction text makes the spec match the implementation.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
emit_intrinsic_store_image() is always using 4 components when
collecting registers for the value. When image has less than
4 components (e.g, r32f, rg32i, etc) this results in extra mov
instructions.
This patch uses the actual number of components from the image format.
For example, in a shader like:
layout (r32f, binding=0) writeonly uniform imageBuffer u_image;
...
void main(void) {
...
imageStore (u_image, some_offset, vec4(1.0));
...
}
instruction count is reduced in at least 3 instructions (note image
format is r32f, 1 component only).
This obviously reduces register pressure as well.
v2: - Added support for image formats from NV_image_format extension
(Ilia Mirkin).
- Return 4 components by default instead of asserting. (Rob Clark).
v3: Added more missing formats (Ilia Mirkin).
v4: Added a debug message for unknown image formats (Rob Clark).
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Instead of going all the way back to the variable, just look at the
deref. The modes are guaranteed to be the same by nir_validate whenever
the variable can be found. This fixes clear_unused_for_modes for
derefs that don't have an accessible variable.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Instead of going all the way back to the variable, just look at the
deref. The modes are guaranteed to be the same by nir_validate whenever
the variable can be found. This fixes apply_barrier_for_modes for
derefs that don't have an accessible variable.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This is instead of looking all the way back to the variable which may
not exist for all derefs. This makes this code properly ignore casts
with modes other than the mode[s] we care about (where casts aren't
allowed).
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This is instead of looking all the way back to the variable which may
not exist for all derefs. This makes this code properly ignore casts
with modes other than the mode[s] we care about (where casts aren't
allowed).
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This is instead of looking all the way back to the variable which may
not exist for all derefs. This makes this code properly ignore casts
with modes other than the mode[s] we care about (where casts aren't
allowed).
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This is instead of looking all the way back to the variable which may
not exist for all derefs. This makes this code properly ignore casts
with modes other than the mode[s] we care about (where casts aren't
allowed).
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
If we can't find the variable from the deref, just assume it isn't
invariant and continue on. This can happen if, for instance, we're
writing to a deref that points into an SSBO.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Each time I have to touch the buffer import/export functions in the dri
state tracker I get lost in the maze of functions converting between
DRI_IMAGE_FOURCC, DRI_IMAGE_FORMAT, DRI_IMAGE_COMPONENTS and pipe format.
Rip it out and replace by a single table, which defines the correspondence
between the different representations.
Also this now stores all the known representations in the __DRIimageRec,
to avoid the loss of information we currently have when importing a buffer
with a fourcc, which doesn't have a corresponding dri format.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Currently all the EGL APIs are missing a way to specify how an imported
dma-buf is intended to be used. Demanding the format to be both usable
for sampling and rendering artificially restricts the list of formats a
driver is able to import.
Looking at how the Intel driver implements those DRI2 image APIs it
doesn't distinguish between render or sampler compatible formats. So
this patch aligns behavior between Intel and Gallium based drivers.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
There is no need to do the detour over the resource behind the
surface to get the format. Use the surface format directly.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Old versions of meson returned ppc64le as the cpu_family for little
endian power8 cpus, versions >=0.48 don't do this, so the check wouldn't
work in that case. This generalizes the check to work for both old and
new versions of meson.
Fixes: 34bbb24ce7
("meson: Add support for ppc assembly/optimizations")
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Gen9-10 have fewer than 4 subslices per slice, so they need this to be
rounded up. Gen11 isn't documented as needing this hack, and it can
also have more than 4 subslices, so the hack actually can break things.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
On some GPUs, especially older Intel GPUs, some math instructions are
very expensive. On those architectures, don't reduce flow control to a
csel if one of the branches contains one of these expensive math
instructions.
This prevents a bunch of cycle count regressions on pre-Gen6 platforms
with a later patch (intel/compiler: More peephole select for pre-Gen6).
v2: Remove stray #if block. Noticed by Thomas.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Thomas Helland <thomashelland90@gmail.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
That flow control may be trying to avoid invalid loads. On at least
some platforms, those loads can also be expensive.
No shader-db changes on any Intel platform (even with the later patch
"intel/compiler: More peephole select").
v2: Add a 'indirect_load_ok' flag to nir_opt_peephole_select. Suggested
by Rob. See also the big comment in src/intel/compiler/brw_nir.c.
v3: Use nir_deref_instr_has_indirect instead of deref_has_indirect (from
nir_lower_io_arrays_to_elements.c).
v4: Fix inverted condition in brw_nir.c. Noticed by Lionel.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
If there is a CMP.NZ that compares a single component (via a .zzzz
swizzle, for example) with 0, it can propagate its conditional modifier
back to a previous CMP that writes only that component. The specific
case that I saw was:
cmp.l.f0(8) g42<1>.xF g61<4>.xF (abs)g18<4>.zF
...
cmp.nz.f0(8) null<1>D g42<4>.xD 0D
In this case we can just delete the second CMP.
No changes on Broadwell or Skylake because they do not use the vec4
backend. Also no changes on GM45 or Iron Lake.
Sandy Bridge, Ivy Bridge, and Haswell had similar results. (Sandy Bridge shown)
total instructions in shared programs: 10856676 -> 10852569 (-0.04%)
instructions in affected programs: 228322 -> 224215 (-1.80%)
helped: 1331
HURT: 0
helped stats (abs) min: 1 max: 7 x̄: 3.09 x̃: 4
helped stats (rel) min: 0.11% max: 6.67% x̄: 1.88% x̃: 1.83%
95% mean confidence interval for instructions value: -3.19 -2.99
95% mean confidence interval for instructions %-change: -1.93% -1.83%
Instructions are helped.
total cycles in shared programs: 154788865 -> 154732047 (-0.04%)
cycles in affected programs: 2485892 -> 2429074 (-2.29%)
helped: 1097
HURT: 59
helped stats (abs) min: 2 max: 168 x̄: 51.96 x̃: 64
helped stats (rel) min: 0.12% max: 12.70% x̄: 3.44% x̃: 2.22%
HURT stats (abs) min: 2 max: 16 x̄: 3.02 x̃: 2
HURT stats (rel) min: 0.18% max: 0.83% x̄: 0.64% x̃: 0.71%
95% mean confidence interval for cycles value: -51.04 -47.26
95% mean confidence interval for cycles %-change: -3.40% -3.07%
Cycles are helped.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
The (-abs(x) >= 0) => (x == 0) optimization is removed from the vec4 and
scalar parts. In the VS part, adding the new pattern was not
helpful. The pattern that is removed is really old, and it has been
handled by NIR for ages.
All Gen7+ platforms had similar results. (Broadwell shown)
total instructions in shared programs: 14715715 -> 14715709 (<.01%)
instructions in affected programs: 474 -> 468 (-1.27%)
helped: 6
HURT: 0
helped stats (abs) min: 1 max: 1 x̄: 1.00 x̃: 1
helped stats (rel) min: 1.12% max: 1.35% x̄: 1.28% x̃: 1.35%
95% mean confidence interval for instructions value: -1.00 -1.00
95% mean confidence interval for instructions %-change: -1.40% -1.15%
Instructions are helped.
total cycles in shared programs: 559569911 -> 559569809 (<.01%)
cycles in affected programs: 5963 -> 5861 (-1.71%)
helped: 6
HURT: 0
helped stats (abs) min: 16 max: 18 x̄: 17.00 x̃: 17
helped stats (rel) min: 1.45% max: 1.88% x̄: 1.73% x̃: 1.85%
95% mean confidence interval for cycles value: -18.15 -15.85
95% mean confidence interval for cycles %-change: -1.95% -1.51%
Cycles are helped.
Iron Lake and Sandy Bridge had similar results. (Iron Lake shown)
total instructions in shared programs: 7780915 -> 7780913 (<.01%)
instructions in affected programs: 246 -> 244 (-0.81%)
helped: 2
HURT: 0
total cycles in shared programs: 177876108 -> 177876106 (<.01%)
cycles in affected programs: 3636 -> 3634 (-0.06%)
helped: 1
HURT: 0
GM45
total instructions in shared programs: 4799152 -> 4799151 (<.01%)
instructions in affected programs: 126 -> 125 (-0.79%)
helped: 1
HURT: 0
total cycles in shared programs: 122052654 -> 122052652 (<.01%)
cycles in affected programs: 3640 -> 3638 (-0.05%)
helped: 1
HURT: 0
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
In an instruction sequence like
cmp(8).ge.f0.0 vgrf17:D, vgrf2.xxxx:D, vgrf9.xxxx:D
(+f0.0) sel(8) vgrf1:UD, vgrf8.xyzw:UD, vgrf1.xyzw:UD
The other fields of vgrf17 may be unused, but the CMP still needs to
generate the other flag bits.
To my surprise, nothing in shader-db or any test suite appears to hit
this. However, I have a change to brw_vec4_cmod_propagation that
creates cases where this can happen. This fix prevents a couple dozen
regressions in that patch.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 5df88c20 ("i965/vec4: Rewrite dead code elimination to use live in/out.")
We were not using the view mask for depth clears, causing only the
first view to be cleared.
Fixes: 2e86f6b259 "radv: Add multiview clears."
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
The switch directly after the check has a default case that returns
NULL too, so the effective return value is not changed. Also this
check is wrong once we start dealing with formats introduced by an
extension (e.g. YUV formats).
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
I botched some copy-and-paste and clamped to signed int max instead of
uint max. Fixes KHR-GL46.shader_image_load_store.multiple-uniforms on
skl.
Fixes: d3e046e76c ("nir: Pull some of intel's image load/store format
conversion to nir_format.h")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
I thought the value was correctly propagated, but actually not.
Fixes: 2ac6d55f38 ("radv: bump reported version to 1.1.90")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
nir_sweep already marks all metadata invalid, so it is safe to release
the memory here too.
mean soft fp64 using uint64: 1,342,759,331 => 1,010,670,475
gfxbench5 aztec ruins high 11: 63,555,571 => 61,889,811
deus ex mankind divided 148: 62,845,304 => 62,829,640
deus ex mankind divided 2890: 71,922,686 => 71,922,686
dirt showdown 676: 69,238,607 => 69,238,607
dolphin ubershaders 210: 77,822,072 => 77,822,072
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Found using pahole.
Changes in peak memory usage according to Valgrind massif:
mean soft fp64 using uint64: 1,343,991,403 => 1,342,759,331
gfxbench5 aztec ruins high 11: 63,619,971 => 63,555,571
deus ex mankind divided 148: 62,887,728 => 62,845,304
deus ex mankind divided 2890: 72,399,750 => 71,922,686
dirt showdown 676: 69,464,023 => 69,238,607
dolphin ubershaders 210: 78,359,728 => 77,822,072
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Replace the old array in each value with a hash table in each value.
Changes in peak memory usage according to Valgrind massif:
mean soft fp64 using uint64: 5,499,875,082 => 1,343,991,403
gfxbench5 aztec ruins high 11: 63,619,971 => 63,619,971
deus ex mankind divided 148: 62,887,728 => 62,887,728
deus ex mankind divided 2890: 72,402,222 => 72,399,750
dirt showdown 676: 74,466,431 => 69,464,023
dolphin ubershaders 210: 109,630,376 => 78,359,728
Run-time change for a full run on shader-db on my Haswell desktop (with
-march=native) is 1.22245% +/- 0.463879% (n=11). This is about +2.9
seconds on a 237 second run. The first time I sent this version of this
patch out, the run-time data was quite different. I had misconfigured
the script that ran the test, and none of the tests from higher GLSL
versions were run. These are generally more complex shaders, and they
are more affected by this change.
The previous version of this patch used a single hash table for the
whole phi builder. The mapping was from [value, block] -> def, so a
separate allocation was needed for each [value, block] tuple. There was
quite a bit of per-allocation overhead (due to ralloc), so the patch was
followed by a patch that added the use of the slab allocator. The
results of those two patches was not quite as good:
mean soft fp64 using uint64: 5,499,875,082 => 1,343,991,403
gfxbench5 aztec ruins high 11: 63,619,971 => 63,619,971
deus ex mankind divided 148: 62,887,728 => 62,887,728
deus ex mankind divided 2890: 72,402,222 => 72,402,222 *
dirt showdown 676: 74,466,431 => 72,443,591 *
dolphin ubershaders 210: 109,630,376 => 81,034,320 *
The * denote tests that are better now. In the tests that are the same
in both patches, the "after" peak memory usage was at a different
location. I did not check the local peaks.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
D3D Booleans use a 32-bit 0/-1 representation. Because this previously
matched NIR exactly, we didn't have to really optimize for it. Now that
we have 1-bit Booleans, we need some specific optimizations to chew
through the D3D12-style Booleans.
Shader-db results on Kaby Lake:
total instructions in shared programs: 15136811 -> 14967944 (-1.12%)
instructions in affected programs: 2457021 -> 2288154 (-6.87%)
helped: 8318
HURT: 10
total cycles in shared programs: 373544524 -> 359701825 (-3.71%)
cycles in affected programs: 151029683 -> 137186984 (-9.17%)
helped: 7749
HURT: 682
total loops in shared programs: 4431 -> 4399 (-0.72%)
loops in affected programs: 32 -> 0
helped: 21
HURT: 0
total spills in shared programs: 10290 -> 10051 (-2.32%)
spills in affected programs: 2532 -> 2293 (-9.44%)
helped: 18
HURT: 18
total fills in shared programs: 22203 -> 21732 (-2.12%)
fills in affected programs: 3319 -> 2848 (-14.19%)
helped: 18
HURT: 18
Note that a large chunk of the improvement fixing regressions caused by
switching to 1-bit Booleans. Previously, our ability to optimize D3D
booleans was improved by using the D3D representation directly in NIR.
Now that NIR does 1-bit bools, we need a few more optimizations.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This is a squash of a few distinct changes:
glsl,spirv: Generate 1-bit Booleans
Revert "Use 32-bit opcodes in the NIR producers and optimizations"
Revert "nir/builder: Generate 32-bit bool opcodes transparently"
nir/builder: Generate 1-bit Booleans in nir_build_imm_bool
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
We also have to add support for 1-bit integers while we're here so we
get 1-bit variants of iand, ior, and inot.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This commit adds support for 1-bit Booleans and integers. Booleans
obviously take a value of true or false. Because we have to define the
semantics of 1-bit signed and unsigned integers, we define uint1_t to
take values of 0 and 1 and int1_t to take values of 0 and -1. 1-bit
arithmetic is then well-defined in the usual way, just with fewer bits.
The definition of int1_t and uint1_t doesn't usually matter but we do
need something for purposes of constant folding.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This commit contains three related changes. First, we define boolN_t
for N = 8, 16, and 64 and move the definition of boolN_vec to the loop
with the other vec definitions. Second, there's no reason why we need
the != 0 on the source because that happens implicitly when it's
converted to bool. Third, for destinations, we use a signed integer
type and just do -(int)bool_val which will give us the 0/-1 behavior we
want and neatly scales to all bit widths.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This is a squash of a bunch of individual changes:
nir/builder: Generate 32-bit bool opcodes transparently
nir/algebraic: Remap Boolean opcodes to the 32-bit variant
Use 32-bit opcodes in the NIR producers and optimizations
Generated with a little hand-editing and the following sed commands:
sed -i 's/nir_op_ball_fequal/nir_op_b32all_fequal/g' **/*.c
sed -i 's/nir_op_bany_fnequal/nir_op_b32any_fnequal/g' **/*.c
sed -i 's/nir_op_ball_iequal/nir_op_b32all_iequal/g' **/*.c
sed -i 's/nir_op_bany_inequal/nir_op_b32any_inequal/g' **/*.c
sed -i 's/nir_op_\([fiu]lt\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]ge\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]ne\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]eq\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fi]\)ne32g/nir_op_\1neg/g' **/*.c
sed -i 's/nir_op_bcsel/nir_op_b32csel/g' **/*.c
Use 32-bit opcodes in the NIR back-ends
Generated with a little hand-editing and the following sed commands:
sed -i 's/nir_op_ball_fequal/nir_op_b32all_fequal/g' **/*.c
sed -i 's/nir_op_bany_fnequal/nir_op_b32any_fnequal/g' **/*.c
sed -i 's/nir_op_ball_iequal/nir_op_b32all_iequal/g' **/*.c
sed -i 's/nir_op_bany_inequal/nir_op_b32any_inequal/g' **/*.c
sed -i 's/nir_op_\([fiu]lt\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]ge\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]ne\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]eq\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fi]\)ne32g/nir_op_\1neg/g' **/*.c
sed -i 's/nir_op_bcsel/nir_op_b32csel/g' **/*.c
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This was originally added for the out-of-tree Mali driver but I think
we've all agreed it's easy enough for them to just do in their back-end.
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Shader-db results on Kaby Lake:
total instructions in shared programs: 15072525 -> 15072525 (0.00%)
instructions in affected programs: 0 -> 0
helped: 0
HURT: 0
This helps prevent regressions in later commits.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Instead of looking at input_sizes[i] which contains the number of
components for each source, we look at the bit size of input_types[i].
This fixes a regression in the 1-bit boolean series though I have no
idea how we haven't seen it before now.
Fixes: 35baee5dce "nir/constant_folding: fix incorrect bit-size check"
Fixes: 9076c4e289 "nir: update opcode definitions for different bit sizes"
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The previous code was creating a boolean by doing an arithmetic right-
shift by 31 which produces a boolean which is true if the argument is
negative. This is the same as the expression r < 0 which is much
simpler and doesn't depend on NIR's representation of booleans.
Reviewed-by: Eric Anholt <eric@anholt.net>
Sadly, the GLX_USE_APPLEGL and GLX_USE_WINDOWSGL cases are not identical
(because GLX_USE_WINDOWSGL uses vtables rather than a maze of ifdefs)
Include <sys/time.h> again, as functions prototyped by it are used in
the GLX_USE_WINDOWSGL path.
Make the include guard around the __glxGetMscRate() definition match the
one at it's declaration again, as it's referenced from dri_common.c
which is built for GLX_USE_WINDOWSGL.
Fixes: a95ec138 ("glx: mandate xf86vidmode only for "drm" dri platforms")
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
These have all been floating in my head, and while I've thought about
encoding them in issues on gitlab once they're enabled, they also make
sense to just have in the area of the code you'll need to work in.
Follows 3954331aff ("vc4: Pull uinfo->data[i] dereference out to the top
of the loop.") which showed a large performance win for vc4, but also
cleans up the code a decent bit.
After generating VIR, we leave c->cursor pointing at the end of the
shader. If the shader had dead code at the end (for example from preamble
instructions in a shader with no side effects), we would assertion fail
that we were leaving the cursor pointing at freed memory. Since anything
following DCE should be setting up a new cursor anyway, just clear the
cursor at the start.
In trying to enable compute shaders, I found that a bunch of deqp-gles31's
compute stuff wanted to interact with indirect dispatch. This was easy to
do on its own.
The thrsw will invalidate rtop, just like accumulators and flags. Caught
by simulator assertions in CS imulextended/umulextended tests.
Fixes: 90269ba353 ("broadcom/vc5: Use THRSW to enable multi-threaded shaders.")
Just like vc4, we have to support linear shared BOs for X11 on arbitrary
displays. When we're faced with a request to texture from one of those,
make a shadow image that we copy using the TFU at the start of the draw
call.
generatemipmap is just filling out the rest of the mipmap that's already
been written (by a mapping or a draw call), so it didn't matter. As I
reuse the TFU code for linear-to-UIF conversions, it'll start mattering.
Otherwise we may race to read old contents. This didn't show up in the
CTS and piglit for me, but it did once I started using the TFU to do
linear->UIF blits for X11.
Fixes: 2ebca177dc ("v3d: Use the TFU to do generatemipmap.")
Same as on nv50, the TXF op always uses the TSC bound to slot 0,
returning blank values if nothing is bound.
An earlier change arranges for the TSC entries list to always have valid
data at entry 0, so here we just make use of it.
Fixes arb_texture_buffer_object-subdata-sync among others.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
This was used for implementing FBFETCH. However that uses TXF, which
doesn't do much with a TSC. The only important bit is that sRGB-decoding
works as expected, which we can achieve since all samplers we ever
generate enable sRGB-decoding. Always point to entry 0 in the TSC table,
and ensure that even before it ever gets initialized, the sRGB-decoding
enable bit is set.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
For older gen's fd_wfi() is used to conditionally insert a WFI if there
hasn't already been one since last draw. But this doesn't work out well
with stateobj since the order the stateobj is evaluated might not be
what you expect. (Ie. stateobj might not be evaluated until a later
draw if there is no geometry from the current draw in a given tile.)
Signed-off-by: Rob Clark <robdclark@gmail.com>
Gen9 hardware requires some workarounds to disable preemption depending
on the type of primitive being emitted.
We implement this by adding a function that checks the primitive type
and number of instances right before the 3DPRIMITIVE.
For now, we just ignore blorp. The only primitive it emits is
3DPRIM_RECTLIST, and since it's not listed in the workarounds, we can
safely leave preemption enabled when it happens. Or it will be disabled
by a previous 3DPRIMITIVE, which should be fine too.
v3:
- Apply missing workarounds for instanced rendering and line loop (Ken)
- Move workaround code to brw_draw_single_prim()
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Set bit when initializing context.
v3:
- Always toggle preemption bool to false before enabling it for the
first time, so the state gets emitted (Chris Wilson).
- Emit end of pipe sync with PIPE_CONTROL_RENDER_TARGET_FLUSH (Ken)
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Now everything with type 'struct slab_child_pool *' is name pool, and
everything with type 'struct slab_mempool *' is named mempool.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
There is no need to have an extra ctx paramter as all the other
parameters carry all the needed information.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
When we first started using genxml, we decided to represent MOCS as an
actual structure, and pack values. However, in many places, it was more
convenient to use a numeric value rather than treating it as a struct,
so we added secondary setters in a bunch of places as well.
We were not entirely consistent, either. Some places only had one.
Gen6 had both kinds of setters for STATE_BASE_ADDRESS, but newer gens
only had the struct-based setters. The names were sometimes "Constant
Buffer Object Control State" instead of "Memory", making it harder to
find. Many had prefixes like "Vertex Buffer MOCS"...in a vertex buffer
packet...which is a bit redundant.
On modern hardware, MOCS is simply an index into a table, but we were
still carrying around the structure with an "Index to MOCS Table" field,
in addition to the direct numeric setters. This is clunky - we really
just want a number on new hardware.
This patch eliminates the struct-based setters, and makes the numeric
setters be consistently called "MOCS". We leave the struct definition
around on Gen7-8 for reference purposes, but it is unused.
v2: Drop bonus "Depth Buffer MOCS" fields on Gen7.5 and Gen9
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
The pass did not correctly handle loops ending in:
if ssa_7 {
block block_8:
/* preds: block_7 */
continue
/* succs: block_1 */
} else {
block block_9:
/* preds: block_7 */
break
/* succs: block_11 */
}
The break will get eliminated by another opt but if this pass gets
called first (as it does on RADV) we ended up inserting
instructions after the break.
Fixes: 5921a19d4b ("nir: add if opt opt_if_loop_last_continue()")
Reviewed-by: Dave Airlie <airlied@redhat.com>
pctx->resource_copy_region() needs to fall back to sw copy for
non-renderable formats. But previously for things that we could
not use the blitter for, would fall back to 3d. Which won't work
if 3d can't render to the dst format either.
Instead rework things to fallback to fd_resource_copy_region(),
which will try 3d core and then fall back to memcpy().
Fixes (for example) dEQP-GLES3.functional.texture.format.sized.2d.rgb9_e5_pot
Signed-off-by: Rob Clark <robdclark@gmail.com>
Fixes a crash with unsupported formats in dEQP-GLES3.functional.texture.format.sized.2d.rgb9_e5_pot
Also fixes gpu hangs with some formats that are supported, but which we
don't know what internal-format to use for the blitter, for ex
dEQP-GLES3.functional.texture.format.sized.2d_array.rgb10_a2_pot
Signed-off-by: Rob Clark <robdclark@gmail.com>
Fixes a crash in dEQP-GLES3.functional.shaders.fragdepth.compare.fragcoord_z
Fixes: 0d240c2214 freedreno/ir3: don't fetch unused tex components
Signed-off-by: Rob Clark <robdclark@gmail.com>
If we emit shader as a pointer to a GEM object, also set the RELOC_DUMP
flag as a hint to kernel that this is a useful buffer to snapshot for
debug dumps.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Pull in updated UAPI and use kernel API version to enable softpin.
Since MSM_SUBMIT_BO_DUMP flag was added at same time, use that to
signal to kernel that cmdstream buffers are useful to dump for
debugging/cmdstream-traces.
Signed-off-by: Rob Clark <robdclark@gmail.com>
I needed the same function for v3d. This was originally in d3e046e76c
("nir: Pull some of intel's image load/store format conversion to
nir_format.h") before we made am istake about simplifying the function.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This reverts commit 06fbcd2cd5.
nir_pack_half_2x16_split *isn't* vectorizable, it's 1-component only, thus
why we had this split-scalar code in the first place.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This helps a lot when debugging image load/store lowering on large
testcases. Unfortunately the Mesa enum name stuff is under src/mesa and
we can't get at it from the compiler.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We have a NIR path, and V3D doesn't have TGSI input for compute (only what
TTN can handle for the various gallium-internal shaders).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
If we gave this function 0 counter buffers, we'd still try and
access pCounterBuffers[0] as this check was incorrect.
Fixes crash with ext_transform_feedback-pipeline-basic-primgen
on zink on radv.
Fixes: 677b496b6 (radv: fix begin/end transform feedback with 0 counter buffers.)
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
The pass should work for all bit sizes but it's less clear that the
extra instructions are worth it on small integers. Also, the hardware
doesn't do mul_high on anything other than 32-bit integers and, absent
any decent mechanism for testing the pass on 8 and 16-bit types, it's
probably best to just leave it disabled for now.
Shader-db results on Sky Lake:
total instructions in shared programs: 15105795 -> 15111403 (0.04%)
instructions in affected programs: 72774 -> 78382 (7.71%)
helped: 0
HURT: 265
Note that hurt here actually means helped because we're getting rid of
integer quotient operations (which are a send on some platforms!) and
replacing them with fairly cheap ALU ops.
Reviewed-by: Ian Romanick ian.d.romanick@intel.com
It's a reasonably well-known fact in the world of compilers that integer
divisions by constants can be replaced by a multiply, an add, and some
shifts. This commit adds such an optimization to NIR for easiest case
of udiv. Other division operations will be added in following commits.
In order to provide some additional driver control, the pass takes a
minimum bit size to optimize.
Reviewed-by: Ian Romanick ian.d.romanick@intel.com
Currently we have the three dri "platforms" - drm, apple and windows.
Since xf86vidmode is a thing only for the drm one, adjust the
preprocessor guards and correctly check for the dependency.
v2: terminate the GLX_USE_WINDOWSGL hunk
Cc: Jon TURNEY <jon.turney@dronecode.org.uk>
Fixes: 5bc509363b ("glx: make xf86vidmode mandatory for direct rendering")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
Virglrenderer does the wrong thing when given an instance divisor;
it tries to use the element-index rather than the binding-index as
the argument to glVertexBindingDivisor(). This worked fine as long
as there was a 1:1 relationship between elements and bindings,
which was the case util 19a91841c3 "st/mesa: Use Array._DrawVAO in
st_atom_array.c.".
So let's detect instance divisors, and restore a 1:1 relationship in
that case. This will make old versions of virglrenderer behave
correctly. For newer versions, we can consider making a better
interface, where the instance divisor isn't specified per element,
but rather per binding. But let's save that for another day.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Fixes: 19a91841c3 "st/mesa: Use Array._DrawVAO in st_atom_array.c."
Reviewed-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Tested-By: Gert Wollny <gert.wollny@collabora.com>
When hile_size is 0, we can't enable HTILE. This doesn't change
anything, except not calling radv_image_alloc_htile().
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Feral games aren't affected because they don't decompress DCC.
F1 2018 has one DCC decompression per frame, but I don't see
any performance improvements. This new predicate will be
probably more useful for DCC/MSAA.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
I needed the same functions for v3d. Note that the color value in the
Intel lowering has already been cut down to image.chans num_components.
v2: Drop the half float one, since it was a 1-liner after cleanup.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Most of the bits were constant, but a few were missed. Avoids warnings
from v3d's upcoming static const bits declarations.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Here we rework force_unroll_array_access() so that we can reuse
the induction variable detection in a following patch.
Reviewed-by: Thomas Helland <thomashelland90@gmail.com>
This documents a process for using GitLab Merge Requests as an second
way to submit code changes for Mesa. Only one of the two methods is
allowed for each patch series.
We will *not* require all patches to be emailed. Some code changes may
be reviewed and merged without any discussion on the mesa-dev email
list.
v2:
* No longer require email. Allow submitter to choose email or a
GitLab merge request.
* Various feedback from Brian, Daniel, Dylan, Eric, Erik, Jason,
Matt, Michel and Rob.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Rob Clark <robdclark@gmail.com>
This has thrown a few people off recently and it's good to have the
process and all the rational for it documented somewhere. A comment at
the top of nir_inline_functions seems as good a place as any.
Acked-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
After going through the spec changelog, it looks like RADV
is up to date. Note that ANV also reports 1.1.90.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
When I made sure that half-float texture-filtering was required for ES3,
I didn't realize that virgl doesn't report support for this correctly.
This regressed the GLES version available on top of several drivers,
including i965 from 3.2 to 2.0.
This is going to need protocol changes to fix properly, so let's just
restore the previous behavior by enabling floating-point filtering
unconditionally for now.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Fixes: fcf9fcee3c "mesa/main: do not require float-texture filtering for es3"
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
The implementation of these opcodes in the generator assumes that their
arguments are packed, and it generates register regions based on that
assumption.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
These are usually used for dealing with sparse resources but there's no
reason why we can't hook them up before we have sparse. We have the
hardware; let's light it up.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
We have to lower some shadow instructions because they don't exist in
hardware and we have to lower txb+offset+clamp because the message gets
too big and we run into the sampler message length limit of 11 regs.
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
I don't know if one is better than the other or not but this approach
has the advantage that we never forget to copy information over and
we're not hard-coding quite as many assumptions. It's also a lot
simpler and much less code.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Instead of having to call two different lower_gradient functions based
on whether or not it's a cube, just make lower_gradient handle cubes.
This significantly simplifies some of the logic.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This simple check helps catch bugs early that can end up propagating
into later stages of the compile and triggering strange asserts.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
AoS sampling tries to use integers for coord wrapping when possible,
as it should be faster. However, for AVX, this was suboptimal, because
only floats can use 8x32bit vectors, whereas integers have to be split
into 4x32bit vectors. (I believe part of why it was slower was also
that at least earlier llvm versions had trouble optimizing it properly,
since you can still do simple bit ops with 8x32bit vectors, so a
sequence of int add / and / int add / and with such vectors would
actually end up doing 128bit inserts/extracts between the operations
instead of just doing the cheap 128bit ands.)
Hence, a special float coord wrapping path was added to AoS sampling.
But this path was actually disabled for a long time already, since we
found that just splitting everything before entering the AoS path was
still sligthly faster usually, so none of this float coord wrapping
code was used anymore (AoS sampling code, when avx2 isn't supported,
never sees vectors with length > 4). I thought it might be useful some
day again, but I'm not interested anymore in optimizing for very weird
instruction sets which have support for 256bit vectors for floats but
not for ints, so just drop it.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
The commit aa0fed10d3 moved a bunch of Freedreno code to a common
directory. The previous directory had a .dir-locals file for Emacs.
This patch copies it to the new directory as well.
Reviewed-by: Kristian H. Kristensen <hoegsberg@chromium.org>
LinkedTransformFeedback is normally populated, which had nerf'd varying
packing since the check was introduced.
Fixes: dbd52585fa st/nir: Disable varying packing when doing transform feedback.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
The Vulkan working group recently discovered that we made a mistake in
assuming that PCI domains are 16-bit even though they can potentially be
32-bit values. To fix this, the next spec update will change the types
in the VK_EXT_pci_bus_info struct to be 32 bits which will be a
backwards-incompatible change. Normally, Khronos tries very hard to
never make backwards incompatible changes to specs. Hopefully, the
extension is new enough (2 months) that there are no shipping apps which
use the extension so this should be safe.
This commit disables the extension for both anv and radv in mesa and
should be back-ported to 18.3 ASAP so we avoid any potential issues with
new apps running on old drivers. I'll send out a commit (which we can
also back-port to 18.3 if we really care) to re-enable the extension in
both drivers once this week's spec update ships. The one known use of
this extension is internal to mesa and will continue working with the
extension disabled and will naturally update when we get a new header.
Cc: "18.3" <mesa-stable@lists.freedesktop.org>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
There's a few missing and convoluted bits:
- FramebufferTexture2DMultisampleEXT
Missing sanity check, should be desktop="false"
- RenderbufferStorageMultisampleEXT
Missing sanity check, is aliased to RenderbufferStorageMultisample.
Thus it's set only when desktop GL or GLES2 v3.0+, while the extension
is GLES2 2.0+.
If we flip the aliasing we'll break indirect GLX, so loosen the version
to 2.0. Not perfect, yet this is the most sane thing I could think of.
v2: [Emil] Fixup RenderbufferStorageMultisampleEXT, commmit message
Cc: Kristian H. Kristensen <hoegsberg@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108974
Fixes: 1b331ae505 ("mesa: Add core support for EXT_multisampled_render_to_texture{,2}")
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Commit b028ce29f0 fixed a typo in
src/freedreno/Makefile.am, but ended up breaking the build for
freedreno. The typo inadvertently made things work, as we were not
supposed to link with libnir or libmesautil to begin with. Those come
in through libmesagallium and the typo prevented the duplicated
linkage.
Fixes: b028ce29f ("freedreno: add the missing _la in libfreedreno_ir3_la")
Cc: Emil Velikov <emil.velikov@collabora.com>
While disassembling the predicate always print flag subregister number
to keep grammar same across the generation for assembler tool.
v2: Combine consecutive format calls (Matt Turner)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
When RepCtrl is set, the swizzle field is ignored by the hardware. In
order to ensure a 1-to-1 correspondence between the human-readable
disassembly and the binary instruction encoding always set the swizzle
to XXXX (all zeros) when it is unused due to RepCtrl
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Just to make it easier to run a nir tests together.
Fixes: a0ae12ca91
("nir/algebraic: Add unit tests for bitsize validation")
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Currently we distinguish if the drawable is a window or pixmap by
checking xcb_present_select_input throws an error or not.
Yet, we don't always free the error state returned by xcb.
Cc: Kirill Burtsev <kirill.burtsev@qt.io>
Cc: Boyan Ding <boyan.j.ding@gmail.com>
Fixes: 6bd9ba7d07 ("loader: Add dri3 helper")
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
[Emil: add commit message, fixes tag]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Following commits will introduce additional fields such as
guessed_trip_count. Renaming these will help avoid confusion
as our unrolling feature set grows.
Reviewed-by: Thomas Helland <thomashelland90@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
load_register_imm and load_register_mem take the destination as the
first argument, so I'd like load_register_reg to do the same the sake
of consistency. Otherwise, reading sequences of mixed LRI/LRM/LRR is
needlessly confusing.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
opnd() might delete the passed in instruction, but it's used through
i->srcExists() later in visit
v2: use continue instead return
v3: use brackets for the outer if/else chain
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
this race condition is pretty harmless, but also pretty trivial to fix
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Shaders are usually quite short, and are private to the context. We can
save memory and reduce the work the kernel needs to do at exec time by
packing them together in a stream uploader for long-lived state.
The TFU lets us format raster and SAND images into formats that can be
read by the texture engine, and do mipmap generation.
The UAPI comes from drm-next e69aa5f9b97f ("Merge tag
'drm-misc-next-2018-12-06' of git://anongit.freedesktop.org/drm/drm-misc
into drm-next")
The HW apparently has some issues (or at least a much more complicated VCM
calculation) with non-combined segments, and the closed source driver also
uses combined I/O. Until I get the last CTS failure resolved (which does
look plausibly like some VPM stomping), let's use combined I/O too.
We were exposing ARB_texture_float, but apparently not the OES subset
flag. Fixes regression from GLES3 support to GLES2.
Fixes: fcf9fcee3c ("mesa/main: do not require float-texture filtering
for es3")
In the softpin world, surface state base address may be a fixed 64-bit
address (with no associated BO). It makes sense to store this in the
offset field. But it needs to be the full size.
We also update the clear color address to be consistently uint64_t
everywhere so we can continue passing intel_miptree_get_clear_color
a pointer to the blorp_address's offset field without type mismatches.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Fix an emberrasing memory leak with the non-softpin submit/rb
implementation.
Fixes: f3cc0d2747 freedreno: import libdrm_freedreno + redesign submit
Signed-off-by: Rob Clark <robdclark@gmail.com>
Detect when a component of an (for example) texture fetch is unused and
propagate the updated wrmask back to the parent instruction.
Signed-off-by: Rob Clark <robdclark@gmail.com>
If we have an reloc from stateobjA to stateobjB, we would previously
leave stateobjB's bos out of the submit's bos table. Handle this case
by copying into stateobjA's reloc_bos table.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Linking against LLVM built with BUILD_SHARED_LIBS fails otherwise,
as the component is required for the draw module.
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
There is not much to do in freedreno - tile layout and multisample
state for gmem renderings is programmed based on the pfb sample count,
while resolve blits take the destination sample count from the resource.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
In gallium, we model the attachment sample count as a new nr_samples
field in pipe_surface. A driver can indicate support for the extension
using the new pipe cap, PIPE_CAP_MULTISAMPLED_RENDER_TO_TEXTURE.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
This new pipe cap and the new nr_samples field in pipe_surface lets a
state tracker bind a render target with a different sample count than
the resource. This allows for implementing
EXT_multisampled_render_to_texture and
EXT_multisampled_render_to_texture2.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
This also turns on EXT_multisampled_render_to_texture which is a
subset of EXT_multisampled_render_to_texture2, allowing only
COLOR_ATTACHMENT0.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
Instead of a single i2b and b2i, we now have i2b32 and b2iN where N is
one if 8, 16, 32, or 64. This leads to having a few more opcodes but
now everything is consistent and booleans aren't a weird special case
anymore.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Suffixes are dropped from a bunch of conversion opcodes when it makes
sense to do so. Others are kept if we really do want the bit-size
restriction.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
All conversion opcodes require a destination size but this makes
constructing certain algebraic expressions rather cumbersome. This
commit adds support to nir_search and nir_algebraic for writing
conversion opcodes without a size. These meta-opcodes match any
conversion of that type regardless of destination size and the size gets
inferred from the sizes of the things being matched or from other
opcodes in the expression.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Instead of using an OrderedDict, just have a (necessarily sorted) array
of transforms and a set of opcodes.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Both of these things are already handled in the Value base class so we
don't need to handle them explicitly in Constant.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
The non-failure path can be tested by just compiling mesa and then
testing it, but the failure paths won't be hit unless you make a mistake,
so it's best to test them with some unit tests.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Before this commit, there were two copies of the algorithm: one in C,
that we would use to figure out what bit-size to give the replacement
expression, and one in Python, that emulated the C one and tried to
prove that the C algorithm would never fail to correctly assign
bit-sizes. That seemed pretty fragile, and likely to fall over if we
make any changes. Furthermore, the C code was really just recomputing
more-or-less the same thing as the Python code every time. Instead, we
can just store the results of the Python algorithm in the C
datastructure, and consult it to compute the bitsize of each value,
moving the "brains" entirely into Python. Since the Python algorithm no
longer has to match C, it's also a lot easier to change it to something
more closely approximating an actual type-inference algorithm. The
algorithm used is based on Hindley-Milner, although deliberately
weakened a little. It's a few more lines than the old one, judging by
the diffstat, but I think it's easier to verify that it's correct while
being as general as possible.
We could split this up into two changes, first making the C code use the
results of the Python code and then rewriting the Python algorithm, but
since the old algorithm never tracked which variable each equivalence
class, it would mean we'd have to add some non-trivial code which would
then get thrown away. I think it's better to see the final state all at
once, although I could also try splitting it up.
v2:
- Replace instances of "== None" and "!= None" with "is None" and
"is not None".
- Rename first_src to first_unsized_src
- Only merge the destination with the first unsized source, since the
sources have already been merged.
- Add a comment explaining what nir_search_value::bit_size now means.
v3:
- Fix one last instance to use "is not" instead of !=
- Don't try to be so clever when choosing which error message to print
based on whether we're in the search or replace expression.
- Fix trailing whitespace.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Nothing to do, the compiler already handles that.
All new dEQP.VK.ubo.* and dEQP.VK.ssbo.* pass, except some
16-bit tests that are quite related to fdo bug #108114.
Only enable the extension on CIK+ because it might not work on SI.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The original code was modifying the global drisw_lf variable, which is bad
when there are multiple contexts in single process, each initialized with
different loader. One may support put_image_shm and the other not.
Since there are currently only two possible combinations, lets create two
global tables, one for each. Lets make them const, since we won't change them
and they can be shared.
This fixes crash in VLC. It used two GL contexts (each in different thread), one
was initialized by its Qt GUI, the other by its video output plugin. The first
one set the put_image_shm=drisw_put_image_shm, the second did not, but
since the same structure was used, the drisw_put_image_shm was used too. Then
it crashed because the second loader did not have putImageShm set.
Downstream bug:
https://bugzilla.opensuse.org/show_bug.cgi?id=1113533
v2: Added Fixes and described the VLC bug.
Fixes: 63c427fa71 ("drisw: use putImageShm if available")
Signed-off-by: Michal Srb <msrb@suse.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
In case we are unlucky if the low part is 0xffffffff.
Fixes: 5d6a560a29 ("radv: do not use the availability bit for timestamp queries")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
If the driver used a compute shader for resetting a query pool,
it should be completed when caches are flushed.
This might reduce the number of stalls if operations are done
between vkCmdResetQueryPool() and vkCmdBeginQuery()
(or vkCmdWriteTimestamp()).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Alex Smith <asmith@feralinteractive.com>
After investigating on this, it appears that COND_WRITE doesn't
work correctly in some situations. I don't know exactly why does
it fail to update DB_Z_INFO.ZRANGE_PRECISION, but as AMDVLK
also uses COND_EXEC I think there is a reason.
Now the driver stores a new metadata value in order to reflect
the last fast depth clear state. If a TC-compat HTILE is fast cleared
with 0.0f, we have to update ZRANGE_PRECISION to 0 in order to
work around that hardware bug.
This fixes rendering issues with The Forest and DXVK and doesn't
seem to introduce any regressions.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108914
Fixes: 68dead112e ("radv: update the ZRANGE_PRECISION value for the TC-compat bug")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Technically speaking, this validation was incorrect, because GL_RGB565
is only supported in OpenGL ES 1.x if OES_framebuffer_object is
supported. This couldn't lead to any real incorrect behavior, because
all drivers support OES_framebuffer_object. But let's keep the code
self-documenting, by correcting the check as per the spec.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
For format fallbacks like ETC and ASTC, switching between sRGB and linear
decoding is undefined, or at least is not bit-exact. Same as
EXT_texture_sRGB_decode on GLES.
There are no piglit or dEQP regresssions.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
1. tools/i965_disasm.c:58:4: warning:
ignoring return value of ‘fread’,
declared with attribute warn_unused_result
fread(assembly, *end, 1, fp);
v2: Fixed incorrect return value check.
( Eric Engestrom <eric.engestrom@intel.com> )
v3: Zero size file check placed before fread with exit()
( Eric Engestrom <eric.engestrom@intel.com> )
v4: - Title is changed.
- The 'size' variable was moved to top of a function scope.
- The assertion was replaced by the proper error handling.
- The error message on a caller side was fixed.
( Eric Engestrom <eric.engestrom@intel.com> )
Signed-off-by: Andrii Simiklit <andrii.simiklit@globallogic.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
../src/intel/tools/aubinator_error_decode.c: In function ‘instdone_register_for_ring’:
../src/intel/tools/aubinator_error_decode.c:177:4: warning: enumeration value ‘I915_ENGINE_CLASS_INVALID’ not handled in switch [-Wswitch]
switch (class) {
^~~~~~
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
It doesn't seem like the exact number has too much effect on the
performaince in "teximage". However setting it to just about anything
prevents some OOMs from getting hit. These values are not well-tuned,
but don't seem too bad.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
All TXF operations implicitly use sampler 0, and fail if it's not bound
to anything. This does not happen in LINKED_TSC mode, but we don't
currently use this.
We ensure that TSC entry at id 0 has the SRGB conversion bit enabled
(and all samplers we normally generate will too). Then when the TSC at
*slot* 0 (not to be confused with entry 0 in the global TSC table) is
unbound, we bind it to entry 0. This way, TXF operations are not
dependent on there being a regular sampler bound there.
Fixes arb_texture_buffer_object-subdata-sync among others. (TBO's are
particularly susceptible to this as they don't bind a sampler.)
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
This fixes some crucible 3d miptree tests I've been working on
when executed using the compute shader path.
Fixes: d08f267814 (radv/gfx9: fix 3d image to image transfers on compute queues.)
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
These days we don't always allocate scanout compatible textures anymore.
That does mean we have to fix the radv android WSI though.
Fixes: b1444c9ccb "radv: Implement VK_ANDROID_native_buffer."
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This extension is not properly tested (testing for
GL_ARB_fragment_shader_interlock is not sufficient), and since this was
noted in review on August 28th no tests have been sent.
Revert "i965: Add INTEL_fragment_shader_ordering support."
Revert "mesa: Add GL/GLSL plumbing for INTEL_fragment_shader_ordering"
This reverts commit 03ecec9ed2.
This reverts commit 119435c877.
Cc: mesa-stable@lists.freedesktop.org
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Eric Anholt <eric@anholt.net>
The OpenGL ES 3.0 specification, table 3.13 lists half-float textures as
filterable, but not float textures. So we shouldn't depend on
ARB_float_texture, which requires full filtering support for both.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
sRGB textures is a requirement for OpenGL ES 3.0, so let's make sure
we don't incorrectly enable a too high version.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
OpenGL ES 3.0 require this functionality, so we should also test for it
to avoid incorrectly exposing a too high GLES version.
On desktop, this has been required since all the way back in OpenGL 1.2
anyway.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
On OpenGL ES 2.0, there's separate extensions adding support for
half-float and float textures. So we need to validate the enums
separately as well.
This also prevents these enums from incorrectly being allowed on
OpenGL ES 1.x, where there's no extension that enables this in the
first place.
While we're at it, remove the pointless default-case, and the seemingly
stale fallthrough comment.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
ctx->Extensions.EXT_texture_sRGB_R8 is set regardless of the API
that's used, so checking for those direcly will always allow the
enums from this extensions when they are supported by the driver.
There's no extension adding support for this on OpenGL ES before
version 3.0, so let's tighten the check.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
ctx->Extensions.EXT_texture_sRGB is set regardless of the API that's
used, so checking for those direcly will always allow the enums from
this extensions when they are supported by the driver.
There's no extension adding support for this on OpenGL ES before
version 3.0, so let's tighten the check.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
ctx->Extensions.EXT_texture_snorm is set regardless of the API
that's used, so checking for those direcly will always allow the
enums from this extensions when they are supported by the driver.
There's no extension adding support for this on OpenGL ES before
version 3.0, so let's tighten the check.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
ctx->Extensions.OES_texture_float is set regardless of the API
that's used, so checking for those direcly will always allow the
enums from this extensions when they are supported by the driver.
There's no extension enabling floating-point textures for OpenGL
ES 1.x, so we shouldn't allow those enums there.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
ctx->Extensions.EXT_texture_type_2_10_10_10_REV is set regardless of
the API that's used, so checking for those direcly will always enable
extensions when they are supported by the driver.
There's no corresponding extension for OpenGL ES 1.x/2.0, so we
shouldn't allow these enums there.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This extension requies OpenGL, and shouldn't be available on OpenGL ES.
So let's not allow the enums from it either.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
ctx->Extensions.EXT_texture_shared_exponent is set regardless of the
API that's used, so checking for those direcly will always allow the
enums from this extensions when they are supported by the driver.
We also need to make sure this is enabled on OpenGL ES 3. Because the
check is repeated, let's introduce a helper.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
EXT_packed_float isn't supported on OpenGL ES, we shouldn't allow
these enums there, before OpenGL ES 3.0 which also introduce support
for these enums.
Since this check is repeated a lot, let's make a helper for this.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
EXT_packed_float isn't supported on OpenGL ES, we shouldn't allow
these enums there, before OpenGL ES 3.0 which also introduce support
for these enums.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Floating-point depth buffers are only supported on OpenGL 3.0, OpenGL ES
3.0, or if ARB_depth_buffer_float is supported. Because we checked a
driver capability rather than using an extension-check helper, we ended
up incorrectly allowing this on OpenGL ES 1.x and 2.x.
Since this logic is repeated, let's make a helper for it.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Integer textures shouldn't be implicitly exposed on OpenGL ES 1.x and
2.x, but because the code checked against a driver-capability rather
than using an extension-check helper, we ended up accidentally allowing
these enums on older versions when the driver supports it.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
ARB_texture_rgb10_a2ui isn't supported on OpenGL ES, we shouldn't expose
it there even if the driver supports it.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
ctx->Extensions.ARB_texture_stencil8 is set regardless of the API
that's used, so checking for those direcly will always allow the
enums from this extensions when they are supported by the driver.
So let's instead check for both ARB_texture_stencil8 and
OES_texture_stencil8, so we support depth textures on OpenGL and
OpenGL ES 2.0+. There's no extension enabling stencil-textures for
OpenGL ES 1.x, so we shouldn't allow those enums there.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
ctx->Extensions.ARB_depth_texture is set regardless of the API that's
used, so checking for those direcly will always allow the enums from
this extensions when they are supported by the driver.
So let's instead check for both ARB_depth_texture and OES_depth_texture,
so we support depth textures on OpenGL and OpenGL ES 2.0+. There's no
extension enabling depth-textures for OpenGL ES 1.x, so we shouldn't
allow those enums there.
This fixes oes_packed_depth_stencil-depth-stencil-texture_gles1 on i965
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
ctx->Extensions.KHR_texture_compression_astc_ldr is set regardless of
the API that's used, so checking for those direcly will always enable
extensions when they are supported by the driver.
But there's no extension enabling ASTC for OpenGL ES 1.x, so we
shouldn't allow those enums there.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
ctx->Extensions.ARB_ES3_compatibility is set regardless of the API
that's used, so checking for those direcly will always enable
extensions when they are supported by the driver.
But there's no extension enabling ETC2 for OpenGL ES 1.x, so we
shouldn't allow those enums there.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
There's no extension enabling S3TC formats on OpenGL ES 1.x, so we
shouldn't allow these even if the driver can support it. So let's check
for EXT_texture_compression_s3tc instead of ANGLE_texture_compression_dxt,
which is supported on all other OpenGL variations.
We also need to use _mesa_has_EXT_texture_compression_s3tc() instead of
checking the driver cap directly, otherwise we end up enabling this on
OpenGL ES 1.x, as the API isn't checked.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
_mesa_has_FOO_bar() knows about the APIs these extensions should be
supported under, so let's use that to simplify these checks a bit.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This makes the logic a little bit easier to follow, and reduce a bit of
repetition.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This makes the logic a little bit easier to follow; this is *either*
about ES2 compatibility *or* about gles. GL_RGB565 was added already in
OpenGL ES 1.0.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Using the _mesa_has_FOO_bar helpers is generally more safe and should
generally be prefered over checking driver-caps like this code did,
because the _mesa_has_FOO_bar helpers also verify the API type and
version.
This shouldn't have any practical effect here, as this function only
gets called for OpenGL ES 3.x right now. But if this was to change in
the future, this makes the function behave a lot more predictable.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
S3_s3tc is the extension that enables this functionality on desktop, so
let's check for that one. The _mesa_has_S3_s3tc() helper already
verifies the API according to the extension-table.
As for the second hunk, we currently already only expose
EXT_texture_compression_s3tc on desktop so by using the helper instead,
we get rid of this detail here, and once we enable it for GLES we'll
automaticall get the interaction right.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
_mesa_es3_error_check_format_and_type isn't specific to OpenGL ES 3.x,
it applies to all versions of OpenGL ES. So let's rename it to reflect
this.
While we're at it, let's also rename a helper function it uses similarly.
As the helper is static, we can also remove the namespacing-prefix from
the name.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
All other _mesa_has_foo functions return bool rather than GLboolean, so
let's follow that style here as well.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The new approach is that samplers don't get unbound even if they won't be used
in a draw and we should just leave them be as well.
Fixes a regression in multiple windows games using gallium nine and nouveau.
v2: adjust num_samplers to keep track of the highest sampler bound
v3: rework how to set the new value of num_samplers
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106577
Fixes: 4d6fab245e
"cso: don't track the number of sampler states bound"
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Fixes -Wstringop-truncation compiler warnings.
See f836d799f9 "intel/decoder: use snprintf(..., "%s", ...) instead of strncpy"
Signed-off-by: Andre Heider <a.heider@gmail.com>
Reviewed-by: Axel Davy <davyaxel0@gmail.com>
Android has cpufeatures library but pinning of threads is not supported
PIPE_OS_LINUX code path causes build error due to sched_getcpu() unavailable
thus we need to avoid setting HAVE_SCHED_GETCPU for Android
Fixes: 48f2160 ("st/mesa: regularly re-pin driver threads to the CCX where the app thread is")
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This patch fixes this build error.
CC tests/xvmc_bench.o
In file included from tests/xvmc_bench.c:35:
tests/testlib.h:38:10: fatal error: 'X11/Xlib.h' file not found
^~~~~~~~~~~~
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
We can mark the buffer unclean if it's ever bound as a TBO,
SSBO, ABO, or image.
This improves
dEQP-GLES3.performance.buffer.data_upload.function_call.map_buffer_range.new_specified_buffer.flag_write_full.stream_draw
from 9.58 MB/s to 451.17 MB/s.
v2: Track buffer cleanliness as a function of bindings (Ilia).
v3: virgl_modify_clean --> virgl_dirty_res (Erik)
Tested-By: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
We flush everytime the command buffer (16 kB) is full, which is
quite costly.
This improves
dEQP-GLES3.performance.buffer.data_upload.function_call.buffer_data.new_buffer.usage_stream_draw
from 111.16 MB/s to 1930.36 MB/s.
In addition, I made the benchmark produce buffers from 0 --> VIRGL_MAX_CMDBUF_DWORDS * 4,
and tried ((VIRGL_MAX_CMDBUF_DWORDS * 4) / 2), ((VIRGL_MAX_CMDBUF_DWORDS * 4) / 4), etc.
I didn't notice any clear differences, so let's just go with the most obvious
heuristic.
Tested-By: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Tested running WebGL aquarium on Nvidia host (10,000 fishes)
This moves us from 7 fps to 9 fps. After quadrupling, performance
gains diminish.
v2: Remove change ID (Erik)
Tested-By: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Pipeline state pending bits should be taken into account when copying
results.
In the particular bug below, the results of the
vkCmdCopyQueryPoolResults() command was being overwritten by the
preceding vkCmdCopyBuffer() with a same destination buffer. This is
because we copy the buffers using the 3D pipeline whereas we copy the
query results using the command streamer. Those pieces of HW work in
parallel and the results are somewhat undefined.
v2: Unconditionally flush the pipeline before copying the results
(Jason)
v3: Wrap & expressions (Jason)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108894
Cc: mesa-stable@lists.freedesktop.org
The calculated length of a line may be infinite, if the coords we
get are bogus. This leads to an infinite loop in line stippling.
To prevent this test for this explicitly (although technically
on at least x86 sse it would actually work without the explicit
test, as long as we use the int-converted length value).
While here also get rid of some always-true condition.
Note this does not actually solve the root cause, which is that
the coords we receive are bogus after clipping. This seems a difficult
problem to solve. One issue is that due to float arithmetic, clip w
may become 0 after clipping if the incoming geometry is
"sufficiently degenerate", hence x/y/z ndc (and window) coords will
be all inf (or nan). Even with w not quite 0, I believe it's possible
we produce values which are actually outside the view volume.
(Also, x=y=z=w=0 coords in clipspace would be not considered subject
to clipping, and similarly result in all NaN coords.) We just hope for
now other draw stages (and rasterizers) can handle those relatively
safely (llvmpipe itself should be sort of robust against this, certainly
converstion to fixed point will produce garbage, it might fail a couple
assertions but should neither hang nor crash otherwise).
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Update to the internal master as of 2018-11-15.
This has a lot of gratuitous whitespace change, but on the plus
side it's built using the same tooling that's used for AMDVLK,
which should help going forward.
Our choices here are simply redundant as long as sin.flags is set
correctly.
(v2:
- remove unused function parameter)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
If all layers are bound we can perform a fast color or depth clear
instead of iterating over all layers. This has the advantage
to avoid trashing the framebuffer for nothing if you we end up by
doing a fast clear when calling radv_clear_image_layer(), and
clearing all layers in one shot is obviously faster.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Fix build error.
CXXLD pipe_msm.la
../../../../src/gallium/drivers/freedreno/.libs/libfreedreno.a(freedreno_batch.o): In function `batch_init':
src/gallium/drivers/freedreno/freedreno_batch.c:54: undefined reference to `fd_device_version'
src/gallium/drivers/freedreno/freedreno_batch.c:59: undefined reference to `fd_submit_new'
src/gallium/drivers/freedreno/freedreno_batch.c:61: undefined reference to `fd_submit_new_ringbuffer'
src/gallium/drivers/freedreno/freedreno_batch.c:64: undefined reference to `fd_submit_new_ringbuffer'
src/gallium/drivers/freedreno/freedreno_batch.c:66: undefined reference to `fd_submit_new_ringbuffer'
src/gallium/drivers/freedreno/freedreno_batch.c:70: undefined reference to `fd_submit_new_ringbuffer'
Fixes: b4476138d5 ("freedreno: move drm to common location")
Fixes: aa0fed10d3 ("freedreno: move ir3 to common location")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Sadly, the 3 games I tested (DeusEx:MD, DiRT Rally, DOTA 2) are unaffected
by the overallocation, because I guess their buffers don't fall into
the small range below a power-of-two size.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
- the slab buffer size increased from 128 KB to 2 MB (PTE fragment size)
- the max suballocated buffer size increased from 64 KB to 256 KB,
this increases memory usage because it wastes memory
- the number of suballocators increased from 1 to 3 and they are layered
on top of each other to minimize unused space in slabs
The final increase in memory usage is:
DeusEx:MD: 1.8%
DOTA 2: 1.75%
DiRT Rally: 0.2%
The kernel driver will also receive fewer buffers.
Vulkan and Gallium don't use Mesa's gl_program data structure, so they
can't poke at 'prog'. But we can simply use the copy of the shader info
stored with the NIR shader, which is guaranteed to exist.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Otherwise, I get this error:
main/egldevice.h:54:13: error: ‘NULL’ undeclared (first use in this function)
dev = NULL;
^~~~
with this config:
./autogen.sh --enable-gles1 --enable-gles2 --with-platforms='surfaceless' --disable-glx
--with-dri-drivers="i965" --with-gallium-drivers="" --enable-gbm
v3: Use stddef.h (Matt)
v4: Modify commit message (Eric)
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
The common truncf(x + 0.5) fails for the floating-point value just less
than 0.5 (nextafterf(0.5, 0.0)). nextafterf(0.5, 0.0) + 0.5, after
rounding is 1.0, thus truncf does not produce the desired value.
The solution is to add nextafterf(0.5, 0.0) instead of 0.5 before
truncating. This works for all values.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Introduce a new driver-private transfer flag RADEON_TRANSFER_TEMPORARY
that specifies whether the caller will use buffer_unmap or not. The
default behavior is set to permanent maps, because that's what drivers
do for Gallium buffer maps.
This should eliminate the need for hacks in libdrm. Assertions are added
to catch when the buffer_unmap calls don't match the (temporary)
buffer_map calls.
I did my best to update r600 for consistency (r300 needs no changes
because it never calls buffer_unmap), even though the radeon winsys
ignores the new flag.
As an added bonus, this should actually improve the performance of
the normal fast path, because we no longer call into libdrm at all
after the first map, and there's one less atomic in the winsys itself
(there are now no atomics left in the UNSYNCHRONIZED fast path).
Cc: Leo Liu <leo.liu@amd.com>
v2:
- remove comment about visible VRAM (Marek)
- don't rely on amdgpu_bo_cpu_map doing an atomic write
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Originally the driver reported GL_FRAMEBUFFER_UNSUPPORTED in all cases,
adding more specific error messages was not correct and broke many tests.
Mostly revert this and only report GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT
for MESA_FORMAT_R_SRGB8.
Fixes: ebcde34545
i965: be more specific about FBO completeness errors
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108805
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
The format is emulated by using ISL_FORMAT_L8_SRGB, therefore we need to
force swizzles for the GBA channels. However, doing this only based on the
data type GL_RED breaks other formats, therefore, test specifically for the
format.
Fixes: c5363869d4
i965: Force zero swizzles for unused components in GL_RED and GL_RG
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
vtest doesn't implement the according API and would segfault:
Program received signal SIGSEGV, Segmentation fault.
#0 0x0000000000000000 in ?? ()
#1 in virgl_fence_server_sync at
src/gallium/drivers/virgl/virgl_context.c:1049
#2 in st_server_wait_sync at
src/mesa/state_tracker/st_cb_syncobj.c:155
so just don't do the call when the function pointers are not set.
Fixes dEQP:
dEQP-GLES3.functional.fence_sync.wait_sync_smalldraw
dEQP-GLES3.functional.fence_sync.wait_sync_largedraw
Fixes: d1a1c21e76
virgl: native fence fd support
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Robert Foss <robert.foss@collabora.com>
Avoids:
Conditional jump or move depends on uninitialised value(s)
at 0x9E2B39F: virgl_vtest_winsys_resource_cache_create (virgl_vtest_winsys.c:379)
by 0x9E2725F: virgl_buffer_create (virgl_buffer.c:169)
by 0x9E246D5: virgl_resource_create (virgl_resource.c:60)
by 0xA0C1B9F: bufferobj_data (st_cb_bufferobjects.c:344)
by 0xA0C1B9F: st_bufferobj_data (st_cb_bufferobjects.c:390)
by 0x9F4ACE3: vbo_use_buffer_objects (vbo_exec_api.c:1136)
by 0xA0C68C3: st_create_context_priv (st_context.c:416)
by 0xA0C707A: st_create_context (st_context.c:598)
by 0x9F81C6B: st_api_create_context (st_manager.c:918)
by 0x9BBE591: dri_create_context (dri_context.c:161)
by 0x9BB6931: driCreateContextAttribs (dri_util.c:473)
by 0x4E97A44: drisw_create_context_attribs (drisw_glx.c:630)
by 0x4E7C591: glXCreateContextAttribsARB (create_context.c:78)
Uninitialised value was created by a stack allocation
at 0x9E2B249: virgl_vtest_winsys_resource_cache_create (virgl_vtest_winsys.c:342)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Robert Foss <robert.foss@collabora.com>
We normally call with stderr which is unbuffered, so this won't affect
that, but it does let me call nir_print_shader(nir, fopen("log", "w+"))
from gdb and actually get the whole shader in my file.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
I've been using this with the kmsro series to test v3d on VKMS without my
old KMS hack in the v3d kernel driver. KMSRO still needs some cleanup,
but v3d RO support seems reasonable.
Improves performance in Talos by about 15% (and significant improvements
in RotR and possibly other but did not bench with final patch) on
kernel 4.19 and earlier.
On 4.20+ a similar effect comes from
433ca054949a "drm/amdgpu: try allocating VRAM as power of two"
v2: Do not impact the alignment of the physical memory.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
CC: <mesa-stable@lists.freedesktop.org>
Since 1285f71d3e landed, it needs to provide apps with proper sample
position for MSAA.
Currently no way to query this to hw, these are taken from blob driver.
Fixes: dEQP-GLES31.functional.texture.multisample.samples_#.sample_position
Signed-off-by: Rob Clark <robdclark@gmail.com>
We set equiv bit in SP_FS_CTRL_REG0. Somehow the hw doesn't hang with
this mismatched config, but does run slower. It is faster with either
neither bit set, or both bits set, but both is the fastest of the three
configurations. Worth a bit over 10% gain in glmark2.
Spotted-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Rob Clark <robdclark@gmail.com>
blip_fp uses GENERIC as input, so blit_vp should match for linking
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Adds all missing texture related logic. For everything to work it also
needs changes to ir2/fd2_program, which are part of the ir2 update patch.
Note: it needs rnndb update
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
[remove stray patch]
Signed-off-by: Rob Clark <robdclark@gmail.com>
200: 256KiB GMEM A200 (imx53)
201: 128KiB GMEM A200 (imx51)
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Rob Clark <robdclark@gmail.com>
On older gens, the CLIP_ADJ bitfields were actually 3.6 fixed point.
Which might make more sense. Although this formula comes up with values
pretty close to what blob does for various viewport sizes (for at least
a5xx and a6xx), and seems to work.
Signed-off-by: Rob Clark <robdclark@gmail.com>
f6131d4ec7 had the side effect of enabling LRZ w/ 32b depth buffers.
But there are some bugs with this, which aren't fully understood yet,
so for now just skip LRZ w/ z32..
Fixes: f6131d4ec7 freedreno/a6xx: Clear z32 and separate stencil with blitter
Signed-off-by: Rob Clark <robdclark@gmail.com>
We generate an IB to clear the gmem at flush time and jump to it
before rendering each tile. This lets us get rid of the command stream
patching for gmem offsets.
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
For RGB surfaces (for example) we don't really care that the colormask
is 0x7 instead of 0xf. This should not trigger clear_with_quad()
slowpath.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
If we can't clear all the buffers with pctx->clear() (say, for example,
because of ColorMask), push the buffers we *can* clear with pctx->clear()
first. Tilers want to see clears coming before draws to enable fast-
paths, and clearing one of the attachments with a quad-draw first
confuses that logic.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Move (most of) the ir3 compiler to src/freedreno/ir3 so that it can be
re-used by some future vulkan driver. The parts that are gallium
specific have been refactored out and remain in the gallium driver.
Getting the move done now so that it can happen before further
refactoring to support a6xx specific instructions.
NOTE also removes ir3_cmdline compiler tool from autotools build since
that was easier than fixing it and I normally use meson build. Waiting
patiently for the day that we can remove *everything* from the autotools
build.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Split the parts that are gallium specific into ir3_gallium so the rest
can move to a common location outside of gallium.
Signed-off-by: Rob Clark <robdclark@gmail.com>
A bit annoying to have to copy into our own struct. But this is
something the compiler really needs to know, at least on earlier
generations where streamout is implemented in shader.
Signed-off-by: Rob Clark <robdclark@gmail.com>
So I can drop env2u() helper from freedreno_util.h and get rid of one
small ir3 dependency on gallium/freedreno
Signed-off-by: Rob Clark <robdclark@gmail.com>
Just massive search/replace for the most part.
Step towards removing ir3 dependency on disasm.h which is shared by
a2xx. One step closer to being able to move ir3 out of gallium.
Signed-off-by: Rob Clark <robdclark@gmail.com>
So that we can re-use at least parts of it for vulkan driver, and so
that we can move ir3 to a common location (which uses fd_bo to allocate
storage for shaders)
Signed-off-by: Rob Clark <robdclark@gmail.com>
Prep work to move drm to a common location.
Slightly hacky, but the softpin debug flag is only temporary.
Signed-off-by: Rob Clark <robdclark@gmail.com>
The compiler doesn't know that ny != 0, so x might be uninitialized for
the printf at the end.
Reviewed-by: Elie Tournier <elie.tournier@collabora.com>
L3 allocation table in h/w specification recommends using 4 KB
granularity for programming allocation fields in L3CNTLREG.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
L3 allocation table in h/w specification recommends using 4 KB
granularity for programming allocation fields in L3CNTLREG.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Use L3 configuration specified in h/w specification.
V2: Drop configs which do under allocation of l3 cache.
Bump up the comment above table.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Scons and autotools don't define it, and as of last commit nothing
uses it.
`VERSION` is also a generic enough name that something somewhere will
eventually clash, and we don't want to repeat the LLVM `DEBUG` fiasco.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Everything else uses PACKAGE_VERSION, so let's be consistent, and
VERSION and PACKAGE_VERSION are currently defined to be the same in
meson and android, while VERSION is undefined in autotools and scons.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Per chapter 3.2 "Instances":
> Providing a NULL VkInstanceCreateInfo::pApplicationInfo or providing
> an apiVersion of 0 is equivalent to providing an apiVersion of
> VK_MAKE_VERSION(1,0,0).
Reported-by: Niklas Haas <git@haasn.xyz>
Fixes: 8c048af589 "anv: Copy the appliation info into the instance"
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
If glGetTexImage or glGetnTexImage is called with a level that doesn't
exist, we get an error message on this form:
Mesa: User error: GL_INVALID_VALUE in glGetTexImage(depth = 0)
This is clearly nonsensical, because these APIs don't even have a
depth-parameter. The reason is that get_texture_image_dims() return
all-zero dimensions for non-existent texture-images, and we go on to
validate these dimensions as if they were user-input, because
glGetTextureSubImage requires checking.
So let's split this logic in two, so glGetTextureSubImage can have
stricter input-validation. All arguments that are no longer validated
are generated internally by mesa, so there's no use in validating them.
Fixes: 42891dbaa1 "gettextsubimage: verify zoffset and depth are correct"
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
This check is the only part of dimensions_error_check that isn't about
error-checking the offset and size arguments of
glGet[Compressed]TextureSubImage(), so it doesn't really belong in here.
This doesn't make a difference right now, apart for changing the
presedence of this error. But it will make a difference for the next
patch, where we no longer call this method from the non-sub tex-image
getters.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
This error checking is the same for teximage and texsubimage getters, so
let's factor it out to its own function.
This will be useful when getteximage and gettexsubimage gets their own
error checking routines a bit later.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
This will be useful when we split error-checking for getteximage and
gettexsubimage later.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
The explanation quotes the spec on the following wording to justify the
error:
"An INVALID_VALUE error is generated if xoffset + width is greater than
the texture’s width, yoffset + height is greater than the texture’s
height, or zoffset + depth is greater than the texture’s depth."
However, this shouldn't generate an error in the case where *all three*
of width, xoffset and the texture's width are zero. In this case, we end
up generating an unspecified error.
So let's remove this check, and instead make sure that we consider this
as an empty texture.
So let's not generate an error, there's non mandated in the spec in
xoffset/yoffset/zoffset = 0 case. We already avoid doing any work in
this case, because of the final, non-error generating check in this
function.
Fixes: b37b35a5d2 "getteximage: assume texture image is empty for non defined levels"
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
This function has been core since OpenGL 4.3, so naming the
implementation and reporting erros using an ARB-suffix can be
confusing.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
When a shader program is de-serialized the gl_shader_program passed in
may actually still hold memory allocations for the transform feedback
varyings. If that is the case, free the varying names and reallocate
the new storage for the names array.
This fixes a memory leak:
Direct leak of 48 byte(s) in 6 object(s) allocated from:
in malloc (/usr/lib64/gcc/x86_64-pc-linux-gnu/7.3.0/libasan.so+0xdb880)
in transform_feedback_varyings ../../samba/mesa/src/mesa/main/transformfeedback.c:875
in _mesa_TransformFeedbackVaryings ../../samba/mesa/src/mesa/main/transformfeedback.c:985
...
Indirect leak of 42 byte(s) in 6 object(s) allocated from:
in __interceptor_strdup (/usr/lib64/gcc/x86_64-pc-linux-gnu/7.3.0/libasan.so+0x761c8)
in transform_feedback_varyings ../../samba/mesa/src/mesa/main/transformfeedback.c:887
in _mesa_TransformFeedbackVaryings ../../samba/mesa/src/mesa/main/transformfeedback.c:985
Fixes: ab2643e4b0
glsl: serialize data from glTransformFeedbackVaryings
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
We used the layer count which results in an off by one error.
Not sure this really affects anything.
Fixes: f4e499ec79 "radv: add initial non-conformant radv vulkan driver"
Reviewed-by: Dave Airlie <airlied@redhat.com>
Use VAO binding information in feedback rendering. In theory
it should reduce the amount of buffer objects scheduled for rendering.
Feedback rendering is implemented in a crude way anyhow, so I do not
expect much gain here. But for the sake of code reuse we should
use the same code for the same task. And finally if feeback rendering
may get improved the array setup is already well done there.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
The change removes the reference that is held on the entries of the
vbuffers[] array. The new code does not do that anymore as following
the code into draw_set_vertex_buffers() the draw context holds an
other reference as long as it is reset down the function again.
So it should be already by that argument save to remove that
additional reference count.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Factor out vertex array setup routines from the array state atom.
The factored functions will be used in feedback rendering in the
next change.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
In st_atom_array, we only need to unmap the upload buffer that
was actually used.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
In st_atom_array, we only need to care for unmapping the upload buffer
if we actually used it.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
dnz flag only applies for multiplications (e.g. to make 0 * Infinity
becomes 0 instead of NaN). Once we optimize a MAD into an ADD, the dnz
flag no longer makes sense, and upsets the GM107 emitter (since it looks
at the ftz and dnz flags together).
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
We don't need to flush anything before these two commands as well.
This is because they have to be externally synchronized, so the
app should have called CmdPipelineBarrier() prior to that and the
driver should have flushed the caches.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The rules encoded in this code also applies to OpenGL ES 3.0 and up,
but the per-enum validation has already been taught about these rules.
So let's get rid of this duplicate, narrow version of the validation.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
ctx->Extensions.ARB_timer_query is set based on the driver-
capabilities, not based on the context type. We need to check
against _mesa_has_ARB_timer_query(ctx) instead to figure out
if the extension is really supported. We also need to check for
EXT_disjoint_timer_query for GLES-support.
This shouln't have any functional effect, as this entry-point is only
valid on desktop GL, or on GLES with EXT_disjoint_timer_query in the
first place. But if this gets added to the core of a future version
of ES, this should be a step in the right direction.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
ctx->Extensions.ARB_query_buffer_object is set based on the driver-
capabilities, not based on the context type. We need to check against
_mesa_has_ARB_query_buffer_object(ctx) instead to figure out if the
extension is really supported.
This turns attempts to read queries into buffer objects on ES 3 into
errors, as required by the spec.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
ctx->Extensions.ARB_transform_feedback_overflow_query is set based on
the driver-capabilities, not based on the context type. We need to
check against _mesa_has_RB_transform_feedback_overflow_query(ctx)
instead to figure out if the extension is really supported.
This turns usage of GL_TRANSFORM_FEEDBACK_STREAM_OVERFLOW and
GL_TRANSFORM_FEEDBACK_OVERFLOW into errors on ES 3, as required by the
spec.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
ctx->Extensions.EXT_transform_feedback is set based on the driver-
capabilities, not based on the context type. We need to check against
_mesa_has_EXT_transform_feedback(ctx) instead to figure out if the
extension is really supported. We also need to check for
OES_geometry_shader.
This turns usage of GL_TRANSFORM_FEEDBACK_PRIMITIVES_WRITTEN into an
error on ES 2, as well as usage of GL_PRIMITIVES_GENERATED on ES 3, both
as required by the spec.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
ctx->Extensions.EXT_timer_query is set based on the driver-
capabilities, not based on the context type. We need to check against
_mesa_has_EXT_timer_query(ctx) instead to figure out if the extension
is really supported. We also need to check for
EXT_disjoint_timer_query, which enables the same functionality for ES.
This turns usage of GL_TIME_ELAPSED into an error on ES 3, as is
required by the spec.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
ctx->Extensions.ARB_ES3_compatibility is set based on the driver-
capabilities, not based on the context type. We need to check against
_mesa_has_ARB_ES3_compatibility(ctx) instead to figure out if the
extension is really supported.
In addition, EXT_occlusion_query_boolean should also allow this
behavior.
This shouldn't cause any functional change, as all drivers that support
ES3_compatibility should in practice enable either ES3_compatibility or
EXT_occlusion_query_boolean under all APIs that export this symbol.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
ctx->Extensions.ARB_occlusion_query2 is set based on the driver-
capabilities, not based on the context type. We need to check against
_mesa_has_ARB_occlusion_query2(ctx) instead to figure out if the
extension is really supported.
In addition, EXT_occlusion_query_boolean should also allow this
behavior.
This shouldn't cause any functional change, as all drivers that support
ARB_occlusion_query2 should in practice enable either
ARB_occlusion_query2 or EXT_occlusion_query_boolean under all APIs that
export this symbol.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
ctx->Extensions.ARB_occlusion_query is set based on the driver-
capabilities, not based on the context type. We need to check against
_mesa_has_ARB_occlusion_query(ctx) instead to figure out if the
extension is really supported. We also need to check for
ARB_occlusion_query2, as ARB_occlusion_query isn't available in core
contexts.
This turns usage of GL_SAMPLES_PASSED into an error on ES 3, as is
required by the spec.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
The _mesa_has_ARB_pipeline_statistics_query(ctx)-helper will already
check the GLES-version according to the extension-table, so if this
extension would ever be back-ported to ES, we only need to update the
table to support this.
This shouln't have any functional effect.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
These enums all have the same values as their non-prefixed versions, and
there's several aliases for some of them. So let's switch to the
non-prefixed versions for simplicity.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
According to the extension spec, this was initially released in 2011,
so let's set this to the correct value.
The value of 2001 could be a copy-paste mistake, as ARB_occlusion_query
which this is based on was released then.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
EXT_occlusion_query_boolean require support for GL_ANY_SAMPLES_PASSED,
which ARB_occlusion_query doesn't supply. We need ARB_occlusion_query2
for this instead.
This is still not 100% accurate, as we also require support for the
GL_SAMPLES_PASSED_CONSERVATIVE target, which isn't guaranteed by either
ARB_occlusion_query nor ARB_occlusion_query2. But it should be trivial
to implement for any driver supporting ARB_occlusion_query2, as it can
simply be implemented as GL_ANY_SAMPLES_PASSED.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Fixes issues with following SkQP tests:
unitTest_VulkanHardwareBuffer_Vulkan_EGL_Syncs
unitTest_VulkanHardwareBuffer_Vulkan_Vulkan_Syncs
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Instead of taking a whole pipeline (which could be anything!), just take
a physical device and robust_buffer_access boolean. This makes it
easier to verify that only the things in the hash actually affect
pipeline compilation.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
It affects apply_pipeline_layout. Shaders compiled with the wrong value
will work but they may not be robust as requested by the app.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Our compile already splits UBO loads into scalars and the untyped
surface read messages we use for SSBO reads and writes only require
dword alignment.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
'post_flush' is only set to NULL for the normal clear path
(ie. only vkCmdClearColorImage() and vkCmdClearDepthStencilImage()
are affected commands).
Because these two operations have to be externally synchronized
with VK_PIPELINE_STAGE_TRANSFER_BIT and VK_ACCESS_TRANSFER_WRITE_BIT,
it's useless to set those flags internallY.
VK_PIPELINE_STAGE_TRANSFER_BIT will wait for compute to be idle,
while VK_ACCESS_TRANSFER_WRITE_BIT will invalidate both L1 vector
caches and L2. RADV_CMD_FLAG_WRITEBACK_GLOBAL_L2 will be superseded
by RADV_CMD_FLAG_INV_GLOBAL_L2.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Since apps also have to follow the ImageFormatProperties query,
we can disallow formats that don't allow image stores (for AMD
that would be SRGB formats).
Note that this only affects anything if the app actually decides
to use the flag.
Had someone ask for this on IRC and at least on the AMD side we
can support it.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
thread_submit can be useful even without DRI_PRIME,
as it can help avoid missed pageflips.
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
Tested-by: Andre Heider <a.heider@gmail.com>
The path allowing triple buffering behaviour wasn't implemented
yet for thread_submit
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
Tested-by: Andre Heider <a.heider@gmail.com>
This fixes two memory leaks reported by ASAN:
Direct leak of 248 byte(s) in 1 object(s) allocated from:
in malloc (/usr/lib64/gcc/x86_64-pc-linux-gnu/7.3.0/libasan.so+0xdb880)
in r600_alloc_buffer_struct ../../samba/mesa/src/gallium/drivers/r600/r600_buffer_common.c:578
in r600_buffer_create ../../samba/mesa/src/gallium/drivers/r600/r600_buffer_common.c:600
in r600_resource_create_common ../../samba/mesa/src/gallium/drivers/r600/r600_pipe_common.c:1265
in r600_resource_create ../../samba/mesa/src/gallium/drivers/r600/r600_pipe.c:725
in pipe_buffer_create ../../samba/mesa/src/gallium/auxiliary/util/u_inlines.h:291
in update_gs_block_state ../../samba/mesa/src/gallium/drivers/r600/r600_state_common.c:1482
Direct leak of 248 byte(s) in 1 object(s) allocated from:
in malloc (/usr/lib64/gcc/x86_64-pc-linux-gnu/7.3.0/libasan.so+0xdb880)
in r600_alloc_buffer_struct ../../samba/mesa/src/gallium/drivers/r600/r600_buffer_common.c:578
in r600_buffer_create ../../samba/mesa/src/gallium/drivers/r600/r600_buffer_common.c:600
in r600_resource_create_common ../../samba/mesa/src/gallium/drivers/r600/r600_pipe_common.c:1265
in r600_resource_create ../../samba/mesa/src/gallium/drivers/r600/r600_pipe.c:722
in pipe_buffer_create ../../samba/mesa/src/gallium/auxiliary/util/u_inlines.h:291
in update_gs_block_state ../../samba/mesa/src/gallium/drivers/r600/r600_state_common.c:1489
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Fixes: 1371d65a7f
r600g: initial support for geometry shaders on evergreen (v2)
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
CP DMA can only be busy when the driver copies buffers. The
only affected Vulkan commands are vkCmdCopyBuffer() and
vkCmdUpdateBuffer() (because we fallback to a copy depending on
a threshold). Clear operations are currently not concerned
because the driver always syncs after the last DMA operation.
Per the spec, these two operations have to be externally
synchronized with VK_PIPELINE_STAGE_TRANSFER_BIT.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Unnecessary as they allow the app to call vkCmdPipelineBarrier()
inside the render pass.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This reverts commit 1f29f4db1e.
For this to work the compiler must ensure that it never puts
the values that arrive to this helper into unsigned variables
at any point in its processing, since that would not apply sign
extension to the value and it would break the expectations here.
Unfortunately, we use uint64_t extensively to pass and copy
things around, so some times we get to this helper with values
that are not properly sign extended to 64-bit. Here is an example
for an 8-bit value that comes from a switch case:
(gdb) p /x x
$1 = 0xffffffd6
The value seems to have been sign extended to 32-bit at some point
getting proper sign extension, but then copied into a uint64_t
which wont' apply sign extension, breaking the expectations of
the assertion.
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
With the current VAO layout we do not need to make these
fields a bitfield. We get a tight struct layout with this change
for VAO attributes.
v2: Change unsigned char -> GLubyte.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Factor out struct gl_vertex_format from array attributes.
The data type is supposed to describe the type of a vertex
element. At this current stage the data type is only used
with the VAO, but actually is useful in various other places.
Due to the bitfields being used, special care needs to be
taken for the glGet code paths.
v2: Change unsigned char -> GLubyte.
Use struct assignment for struct gl_vertex_format.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Instead of open coding the size computation, use the
already available gl_array_attribute::_ElementSize value.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Instead of open coding the size computation, use the
already available gl_array_attribute::_ElementSize value.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Use GL_UNSIGNED_BYTE as initialization data type
for the edge flag vertex attribute array. The same datatype
is used in the glEdgeFlagPointer function when setting the
array pointer.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
For enabling or disabling VAO arrays it is now possible to
change a set of arrays with a single call without the need to
iterate the attributes.
Make use of this technique in the vao module.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Instead of using gl_array_attributes::Enabled use the
much more compact representation stored in
gl_vertex_array_object::Enabled using the corresponding bits.
Keep the glGet changes in a seperate patch at least for review.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Instead of using gl_array_attributes::Enabled use the
much more compact representation stored in
gl_vertex_array_object::Enabled using the corresponding bits.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Mark the up to now derived bitfield value now as primary
value by removing the underscore.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
radeonsi has 3 driver threads (glthread, gallium, winsys), other drivers
may have 2 (glthread, gallium), so it makes sense to pin them to a random
CCX and keep that irrespective of the app thread.
Reviewed-by: Dave Airlie <airlied@redhat.com>
This is used when glthread is disabled.
Mesa pretty much chases the app thread on the CPU.
The performance is the same as pinning the app thread.
Reviewed-by: Dave Airlie <airlied@redhat.com>
This moves nir_shader_clone() to the driver-specific compile function,
rather than the shared src/intel/compiler code. This allows i965 to do
key-specific passes before calling brw_compile_*. Vulkan should not
need this cloning as it doesn't compile multiple variants.
We do need to continue cloning in the compute shader code because we
lower various things in NIR based on the SIMD width.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
We won't have a var to load from, so don't try to the processing
required if we don't need it.
This avoids crashes in:
dEQP-VK.spirv_assembly.instruction.compute.variable_pointers.compute.workgroup_two_buffers
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
For variable pointers we really don't want to case the pointers to int
without a good reason, just add a wrapper for bcsel loading and result
storing.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Meson test has a concepts of suites, which allow tests to be grouped
together. This allows for a subtest of tests to be run only (say only
the tests for nir). A test can be added to more than one suite, but for
the most part I've only added a test to a single suite, though I've
added a compiler group that includes nir, glsl, and glcpp tests.
To use this you'll need to invoke meson test directly, instead of ninja
test (which always runs all targets). it can be invoked as:
`meson test -C builddir --suite $suitename` (meson test has addition
options that are pretty useful).
Tested-By: Gert Wollny <gert.wollny@collabora.com>
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
Currently we detect the module and if missing, the glXGetMsc* API is
effectively a stub, always returning false.
This is what effectively has been happening with our meson build :-(
Thus users have no chance of using it - they cannot even distinguish
if the failure is due to a misconfigured build.
There's no reason for keeping xf86vidmode optional - it has been
available in all distributions for years.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Fixes: a47c525f32 "meson: build glx"
Fixes an assertion in SoTTR.
Fixes: dd0172e865 ("radv: Use structured intrinsics instead of indexing workaround for GFX9.")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The existing backend code assumed that if VARYING_SLOT_CLIP_DIST0
was written, then VARYING_SLOT_CLIP_DIST1 would be as well. That's
true with the current lowering, but not necessary if there are 4 or
fewer clip distances. Separate out the checks to allow this.
The new NIR-based lowering will trigger this case, which would have
caused backend validation errors (src is null) without this patch.
Reviewed-by: Eric Anholt <eric@anholt.net>
The way nir_lower_clip_vs() works with store_output intrinsics makes a
ton of assumptions about the driver_location field.
In i965 and iris, I'd rather do this lowering early and work with
variables. v3d may want to switch to that as well, and ir3 could too,
but I'm not sure exactly what would need updating. For now, handle
both methods.
Reviewed-by: Eric Anholt <eric@anholt.net>
I posted a load of hacks before to do this, Jason suggested this,
just check the deref mode, not the variable mode and delay getting
the variable until we know the type.
avoids crashes when derefing shared memory pointers.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
../src/intel/compiler/brw_fs_nir.cpp:3534:46: warning: comparison of integer expressions of different signedness: ‘unsigned int’ and ‘int’ [-Wsign-compare]
assert(nir_intrinsic_write_mask(instr) ==
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~
(1 << instr->num_components) - 1);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This was caused by 6339aba775 which added these completely valid
checks. However clang likes to complain about signedness mismatches.
Fixes: 6339aba775 "intel/compiler: Lower SSBO and shared..."
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
It's not at all intel-specific; the formula is dictated by OpenGL and
Vulkan. The only intel-specific thing is that we need the lowering. As
a nice side-effect, the new version is variable-group-size ready.
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>
Fixes: d971a4230d "loader: Factor out the common driver
opening logic from each loader."
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
This allows to fast clear the depth part (or the stencil part)
of a depth+stencil surface when HTILE is enabled. I didn't test
on GFX8, so it's disabled currently.
This gives a very nice boost, for example when clearing the depth
aspect of a 4096x4096 D32_SFLOAT_S8_UINT image (18x faster).
BEFORE: 235 us
AFTER: 13 us
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This path will be eventually improved later but as it's only
used on SI (or with RADV_DEBUG=noibs), I'm not sure if that
matters much.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The chained submission is the fastest path and it should now
be used more often than before. This removes some EOP events.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
At least GC2000 seems to push some dirt from the PE color cache into
the last bound render target when drawing depth only. Newer cores
seem to behave properly and don't do this, but I have found no way
to fix it on GC2000. Flushes and stalls don't seem to make any
difference.
In order to stop the core from pushing the dirt into a precious real
render target, plug in dummy buffer when rendering without a color
buffer.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
DCC and FMASK also imply a fast-clear eliminate, so it should be
safe to reset the predicate unconditionally. We still only skip
FMASK or CMASK decompressions for now.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
We read 4 values out of sample_locs_8x, so make sure the array is
big enough.
Fixes: ac76aeef20 ("radeonsi: switch back to standard DX sample positions")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
With 5d517a streamout info is only attached to the shader for which the
transform feedback is actually recorded, but the driver set the context info
with each state submitted, thereby always using the info data that was
attached to the vertex shader.
Pass the streamout stride info to the context only from the shader that
actually has outputs. (Thanks to Marek Olšák for pointing me in the right
direction)
Fixes regresion with: dEQP-GLES31.functional.tessellation.invariance.*
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108734
Fixes: 5d517a599b
st/mesa: Don't record garbage streamout information in the non-SSO case.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
FRAMEBUFFER_INCOMPLETE_DIMENSIONS is not supported for GLES 3.0 and later and
not defined for Desktop OpenGL. Instead use FRAMEBUFFER_UNSUPPORTED like it
was done before.
Thanks to Iago Toral and Andrey Simiklit for pointing out the problem and the
details.
Fixes: ebcde34545
i965: be more specific about FBO completeness errors
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
The structure qdws is not allocated at this point, nor is the
file descriptor set to it's member. Use the fd directly instead.
Fixes: d1a1c21e76
virgl: native fence fd support
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Emulate MESA_FORMAT_R_SRGB8 by using L8_UNORM_SRGB. This is possible
because component swizzling is handled based on the mesa format and,
hence, the a r001 swizzling can be used to correct the components.
Enables and makes pass (tested on Kabylake)
dEQP-GLES31.functional.srgb_texture_decode.skip_decode.sr8.*
dEQP-GLES31.functional.texture.filtering.cube_array.formats.sr8*
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
The driver was returning GL_FRAMEBUFFER_UNSUPPORTED for all cases of an
incomplete fbo, be a bit more specific about this following the description
of glCheckFramebufferStatus.
This helps to keeps dEQP happy when adding EXT_texture_sRGB_R8 support.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
On nv50, certain operations must happen on regs below 64, due to
encoding requirements. First of all, we add infrastructure to enforce
this. Secondly we change the spill order to first spill RIG nodes that
are unconstrained, followed by ones that are.
This makes the gamecube logo shadertoy compile properly. Curiously, if
we adjust the spill order so that we first spill the constrained RIG
nodes instead, the RA also succeeds. However it seems more logical to
first spill the unconstrained ones.
While we're at it, drop the nv50 max register to reserve r127 as the
zero register of last resort (r63 is preferred).
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Acked-by: Karol Herbst <kherbst@redhat.com>
Instead of the size restriction existing in two places, and potentially
being applied twice, we move this together. Ops with 16-bit register
addresses can only take a short reg, and ops with immediates can only
take a short reg.
Of course we leave the immediate 0 in place since we know that it will
be replaced by r63/r127 down the line, so don't treat zeroes as an
immediate.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
We removed the op from the BB, but it was still listed in its sources'
uses. This could trip up some logic down the line which analyzes all the
uses of an l-value, e.g. spilling.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Previously we would print errors on the console like:
libEGL debug: EGL user error 0x3001 (EGL_NOT_INITIALIZED) in eglInitialize
When we had everything we needed for:
libEGL debug: EGL user error 0x3001 (EGL_NOT_INITIALIZED) in eglInitialize: DRI2: failed to find EGLDevice
(for a gbm error in my case)
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
I copied the code from egl_dri2.c, but the functionality was equivalent
between all the loaders other than their particular environment variables.
v2: Drop the logging function equivalent to loader_default_logger()
(requested by Eric, Emil). Move the SCons workaround across. Drop
the now-unused driGetDriverExtensions() declaration that was lost in a
rebase.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com> (v1)
Reviewed-by: Emil Velikov <emil.velikov@collabora.com> (v1)
I need other types from the header now, and "gl.h is big" is not a good
reason to duplicate definitions.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The only thing you do with a dri driver handle is get the extensions
pointer, so just fold it in to simplify the callers.
v2: Add the declaration of driGetDriverExtensions() that got lost in a
rebase.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com> (v1)
Reviewed-by: Emil Velikov <emil.velikov@collabora.com> (v1)
You can tell by "Mesa/configs/default" how old this is. Your build system
really has to provide the DEFAULT_DRIVER_DIR, or other loaders will break.
v2: Move the bad (non-prefix-dependent) define to the SConscript to avoid
breaking it.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com> (v1)
Reviewed-by: Emil Velikov <emil.velikov@collabora.com> (v1)
After doing a bunch of benchmarks, primitive binning helps
some games like The Talos Principle (+5%) or Serious Sam 2017
(+3%). For other titles, either it doesn't change anything or
it hurts very few (less than 1%).
This only affects GFX9.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
We can only start parsing commands from the head pointer. This was
working fine up to now because we only dealt with a "made up" ring
buffer (generated by aub_write) which always had its head at 0.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Toni Lönnberg <toni.lonnberg@intel.com>
According to the EGL_EXT_image_dma_buf_import spec, creating an EGL
image with a DRM format not supported should yield the BAD_MATCH
error :
"
* If <target> is EGL_LINUX_DMA_BUF_EXT, and the EGL_LINUX_DRM_FOURCC_EXT
attribute is set to a format not supported by the EGL, EGL_BAD_MATCH
is generated.
"
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 20de7f9f22 ("egl/dri2: support for creating images out of dma buffers")
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
gbm_bo_create() was presumably meant to originally accept gbm_bo_format
enums, but it's accepted GBM_FORMAT_* tokens since the dawn of time.
This is good, since gbm_bo_format is rarely used and covers a lot less
ground than GBM_FORMAT_*.
Change the documentation to refer to both; this involves removing a 'see
also' for gbm_bo_format, since we can't also use \sa to refer to a
family of anonymous #defines.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
This reverts commit 647c2b90e9. There was
one recently-introduced bug in ac for dvec3 loads, but the other test
failures were actually bugs in the tests. See
9429e621c4
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The handles exported need to be on the KMS device's fd, anything else is
failure. Also, this code is assuming that the scanout resource has been
created already, so assert it.
The DRI3 create_with_modifiers paths don't set tmpl.bind to SCANOUT or
SHARED, with the theory that given that you've got modifiers, that's all
you need. However, we were looking at the tmpl.bind for setting up the
KMS handle in the renderonly case, so we'd end up trying to use vc4's
handle on the hx8357d fd.
Fixes: 84ed8b67c5 ("vc4: Set shareable BOs as T tiled if possible")
Handle all cases in calculation of layers count for isl_view
taking into account texture view and image unit.
st_convert_image was taken as a reference.
When u->Layered is true the whole level is taken with respect to
image view. In other case only one layer is taken.
v3: (Józef Kucia and Ilia Mirkin)
- Rewrote patch by taking st_convert_image as a reference
- Removed now unused get_image_num_layers function
- Changed commit message
v4: (Jason Ekstrand)
- Added assert
Fixes: 5a8c8903
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107856
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We have a bunch of code to do this in the back-end compiler but it's
fairly specific to typed surface messages and the way we emit them.
This breaks it out into NIR were it's easier to do things a bit more
generally. It also means we can easily share the code between the vec4
and FS back-ends if we wish.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
This also changes spirv_to_nir and glsl_to_nir to set them. The one
place that doesn't set them is shared memory access lowering in
nir_lower_io. That will have to be updated before any consumers of it
can effectively use these new alignments.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Acked-by: Karol Herbst <kherbst@redhat.com>
The new helpers can generate any pack/unpack operation including those
for which we do not have specific opcodes and they express a bitcast in
terms of these pack/unpack operations. In particular, the new helpers
properly handle 8-bit types.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
The pattern of adding or multiplying an integer by an immediate is
fairly common especially in deref chain handling. This adds a helper
for it and uses it a few places. The advantage to the helper is that
it automatically handles bit sizes for you.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
This assert won't catch all mistakes with this helper but it will at
least ensure that the top bits are all zero or all one which should help
catch bugs.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Section 3.7 (Identifiers) of the GLSL spec says:
However, as noted in the specification, there are some cases where
previously declared variables can be redeclared to change or add
some property, and predeclared "gl_" names are allowed to be
redeclared in a shader only for these specific purposes. More
generally, it is an error to redeclare a variable, including those
starting "gl_".
This patch should fix piglit tests:
clip-distance-redeclare-without-inout.frag
clip-distance-redeclare-without-inout.vert
However, this causes a regression in
clip-distance-out-values.shader_test. A fix for that test has been sent
to the piglit list for review:
https://patchwork.freedesktop.org/patch/255201/
As far as I understood following mailing thread:
https://lists.freedesktop.org/archives/piglit/2013-October/007935.html
looks like we have accepted to remove an ability to change qualifiers
but have not done it yet. Unless I missed something)
v2 (idr): Move 'earlier->data.mode != var->data.mode' test much earlier
in the function. Add special handling for gl_LastFragData.
Signed-off-by: Andrii Simiklit <andrii.simiklit@globallogic.com>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
I screwed up a rebase over a refactor and didn't notice locally because
the uncommitted refactor hid the issue.
Fixes: c973364967 "egl: add missing glvnd entrypoint for EGL_ANDROID_blob_cache"
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Both BRW_SFID_SAMPLER and GEN6_SFID_DATAPORT_SAMPLER_CACHE are getting
disassembled as "sampler", which is misleading for assembler tool.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Fixes dEQP-EGL.functional.get_proc_address.extension.egl_android_blob_cache
on builds with glvnd enabled.
Fixes: 6f5b57093b "egl: add support for EGL_ANDROID_blob_cache"
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Currently we detect when a breaking commit:
- has landed in stable, and
- is referenced by a untagged fix in master
Yet we did not consider the case of breaking commit:
- prior to the branchpoint, and
- is referenced by a untagged fix in master
Addressing the latter is extremely slow, due to the size of the lookup.
That said, we can trivially use the existing is_sha_nomination() helper
to catch reverts.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Currently we match on:
- any arbitrary length of,
- any a-z A-Z and 0-9 characters
At the same time, a commit sha consists of lowercase hexadecimal
numbers. Any sha shorter than 8 characters is ambiguous - in some cases
even 11+ are required.
So change the pattern to a-f0-9 and adjust the length to 8-40.
As we're here we could use a single grep, instead of the grep/sed combo.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Having a separate script to handle the fixes tag, brings a number of
issues, so let's fold it in get-pick-list.sh.
v2:
- pass the sha as argument to the function
- Keep original sed pattern
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
As the comment in get-typod-pick-list.sh says, there's little point in
having a duplicate file.
Add the new pattern + tag to get-pick-list.sh and nuke this file.
v2:
- pass the sha as argument to the function
- grep -q instead of using a variable (Eric)
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
With later commits we'll fold all the different scripts into one.
Add the explicit prefix, so that we know the origin of the nomination
v2:
- pass the sha as argument to the function
- swap $tag = none for an else statment (Juan)
- grep -q instead of using a variable (Eric)
- print the tag and commit oneline separately (Eric)
v3:
- drop unused "tag=none" assignment (Juan)
- typo nomination
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com> (v2)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
A while back we agreed that having a live/staging branch is beneficial.
Sadly we forgot to document that, so here is my first attempt.
Document the caveat that the branch history is not stable.
CC: Andres Gomez <agomez@igalia.com>
CC: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
etna_resource_alloc and etna_resource_from_handle currently use different checks.
This leads to
etna_resource_from_handle:492: target=2, format=PIPE_FORMAT_B8G8R8X8_UNORM, 1080x1920x1, array_size=1, last_level=0, nr_samples=0, usage=0, bind=8000a, flags=0
etna_resource_from_handle:541: BO stride 4320 is too small for RS engine width padding (4352, format PIPE_FORMAT_B8G8R8X8_UNORM)
since etna_resource_from_handle wants to be aligned to a 16 byte
boundary while the etna_resource_alloc does not.
Adjust the two checks by using a common function.
Broken by baff59ebf0
Signed-off-by: Guido Günther <guido.gunther@puri.sm>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
1. nir/nir_lower_vars_to_ssa.c:691:21: warning:
unused variable ‘var’
nir_variable *var = path->path[0]->var;
v2: Changes for some part of 'may be used uninitialized'
warnings were removed, seems like it is a compiler issue.
( Eric Engestrom <eric.engestrom@intel.com> )
Possible like this one:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=46684
This issue is flagged as duplicate but an
original one is not closed yet.
Signed-off-by: Andrii Simiklit <andrii.simiklit@globallogic.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Bump minor to signal support for new formats and higher precision
solid pictures.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Support Component Alpha for those composite operations that do not require
per-channel alpha blending.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
In the case when we had both source and mask samplers, transformations were
typically not applied correctly.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
The only solid fill picture type we supported only had 8 bit color
channels. Add a new solid picture type that supports float channels.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Remove unused and obsolete code for gradients and component-alpha
Support solid source- and mask pictures using a variable number
of samplers in the composite pipeline rather than the fixed number
we used before.
Tested using rendercheck for XA.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Some hardware supports source mods only for float operations. Make it
possible to skip lowering to source mods in these cases.
v2: use option flags instead of a boolean (Jason Ekstrand)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
this helps reduce the overall code changes when a bit_size parameter is
added to nir_load_system_value
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
this allows to replace some nir_load_system_value calls with the specific
system value constructor
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
This shouldn't make any difference but I feel uneasy to use the
expanded aspects that do not represent the image in its entirety. If
we ever change the implementation of the anv_image_aspect_to_plane()
helper, this is safer.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
To play around with debugging, we might want to disable one or the
other component. Having 0s as default values makes this work.
Otherwise we might have NULL components, leading to crashes.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Those empty variables in the !wayland case are useless and running that
meson.build with them breaks the build:
[287/850] Generating wayland-drm-client-protocol.h with a custom command.
FAILED: src/egl/wayland/wayland-drm/wayland-drm-client-protocol.h
client-header ../src/egl/wayland/wayland-drm/wayland-drm.xml src/egl/wayland/wayland-drm/wayland-drm-client-protocol.h
/bin/sh: client-header: command not found
ninja: build stopped: subcommand failed.
Fixes: d1992255bb "meson: Add build Intel "anv" vulkan driver"
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
`inc_wayland_drm` is only used if wayland is built, and it's already
added in that case a few lines below.
Fixes: a29869e872 "gbm: Don't traverse backwards for includes"
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
These files are close to 4 years out of date; a lot's changed since.
Let's just check in a recently-regenerated version.
Changes generated by running `ninja xmlpool-{pot,update-po,gmo}`.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Instructions meant for the render engine now have a definition specifying that
so that can differentiate instructions meant for different engines due to shared
opcodes.
v2: Divided into individual patches for each gen
v3: Added additional engine definitions.
v4: Added missing engine definition to MI_TOPOLOGY_FILTER.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Instructions meant for the render engine now have a definition specifying that
so that can differentiate instructions meant for different engines due to shared
opcodes.
v2: Divided into individual patches for each gen
v3: Added additional engine definitions.
v4: Added missing engine definition to MI_TOPOLOGY_FILTER.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Instructions meant for the render engine now have a definition specifying that
so that can differentiate instructions meant for different engines due to shared
opcodes.
v2: Divided into individual patches for each gen
v3: Added additional engine definitions.
v4: Added more missing engine definitions.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Instructions meant for the render engine now have a definition specifying that
so that can differentiate instructions meant for different engines due to shared
opcodes.
v2: Divided into individual patches for each gen
v3: Added additional engine definitions.
v4: Added missing engine tag for MI_TOPOLOGY_FILTER and MI_LOAD_URB_MEM.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Instructions meant for the render engine now have a definition specifying that
so that can differentiate instructions meant for different engines due to shared
opcodes.
v2: Divided into individual patches for each gen
v3: Added additional engine definitions.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Instructions meant for the render engine now have a definition specifying that
so that can differentiate instructions meant for different engines due to shared
opcodes.
v2: Divided into individual patches for each gen
v3: Added additional engine definitions.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Instructions meant for the render engine now have a definition specifying that
so that can differentiate instructions meant for different engines due to shared
opcodes.
v2: Divided into individual patches for each gen
v3: Added additional engine definitions
v4: Added missing engine to MEDIA_GATEWAY_STATE
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Instructions meant for the render engine now have a definition specifying that
so that can differentiate instructions meant for different engines due to shared
opcodes.
v2: Divided into individual patches for each gen
v3: Added additional engine definitions.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Instructions meant for the render engine now have a definition specifying that
so that can differentiate instructions meant for different engines due to shared
opcodes.
v2: Divided into individual patches for each gen
v3: Added addition engine definitions.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Instructions meant for the render engine now have a definition specifying that
so that can differentiate instructions meant for different engines due to shared
opcodes.
v2: Divided into individual patches for each gen
v3: Added additional engine definitions.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
The engine to which the batch was sent to is now set to the decoder context when
decoding the batch. This is needed so that we can distinguish between
instructions as the render and video pipe share some of the instruction opcodes.
v2: The engine is now in the decoder context and the batch decoder uses a local
function for finding the instruction for an engine.
v3: Spec uses engine_mask now instead of engine, replaced engine class enums
with the definitions from UAPI.
v4: Fix up aubinator_viewer (Lionel)
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Removed the gen_engine enum and changed the involved functions to use the
drm_i915_gem_engine_class enum from UAPI instead.
v3: Wrong engine was being used for blocks in video ring
v4: Fixed aubinator_viewer.cpp
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Preliminary work for adding handling of different pipes to gen_decoder. Each
instruction needs to have a definition describing which engine it is meant for.
If left undefined, by default, the instruction is defined for all engines.
v2: Changed to use the engine class definitions from UAPI
v3: Changed I915_ENGINE_CLASS_TO_MASK to use BITSET_BIT, change engine to
engine_mask, added check for incorrect engine and added the possibility to
define an instruction to multiple engines using the "|" as a delimiter in the
engine attribute.
v4: Fixed the memory leak.
v5: Removed an unnecessary ralloc_free().
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
On the host VREND_DEBUG=guestallow must be set to let the guest override
the debug flags.
v2: Send flag string instead of flags, this avoids the need to keep
the flags in sync.
v3: Only request host logging if the host actually understands the command
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Transform feedback objects may hold a pointer to a shader program, and
at least in Gallium, this must be a valid pointer until
ctx->Driver.EndTransformFeedback in glEndTransformFeedback has been called
- which is conform with the spec that any program that is part of a
current rendering state should only be flagged for deletion by glDeleteProgram.
This was not handled properly for the transform feedback objects so that
a call sequence
glUseProgram(x)
glBeginTransformFreedback(...)
glPauseTransformFeedback(...)
glDeleteProgram(x)
glEndTransformFeedback(...)
would result in a use after free bug. With this patch the transform
feedback object also updates the reference count to the used program
thereby keeping the program valid as long as the transform feedback
objects links to it.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108713
Fixes: 654587696b
mesa: add end_transform_feedback() helper
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
If the local work group size is variable it won't be available
at compile time so we can't lower it in nir_lower_system_values().
Signed-off-by: Plamena Manolova <plamena.n.manolova@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Prior to this patch sizeof(linear_header) was 20 bytes in a
non-debug build on 32-bit platforms. We do some pointer arithmetic to
calculate the next available location with
ptr = (linear_size_chunk *)((char *)&latest[1] + latest->offset);
in linear_alloc_child(). The &latest[1] adds 20 bytes, so an allocation
would only be 4-byte aligned.
On 32-bit SPARC a 'sttw' instruction (which stores a consecutive pair of
4-byte registers to memory) requires an 8-byte aligned address. Such an
instruction is used to store to an 8-byte integer type, like intmax_t
which is used in glcpp's expression_value_t struct.
As a result of the 4-byte alignment returned by linear_alloc_child() we
would generate a SIGBUS (unaligned exception) on SPARC.
According to the GNU libc manual malloc() always returns memory that has
at least an alignment of 8-bytes [1]. I think our allocator should do
the same.
So, simple fix with two parts:
(1) Increase SUBALLOC_ALIGNMENT to 8 unconditionally.
(2) Mark linear_header with an aligned attribute, which will cause
its sizeof to be rounded up to that alignment. (We already do
this for ralloc_header)
With this done, all Mesa's unit tests now pass on SPARC.
[1] https://www.gnu.org/software/libc/manual/html_node/Aligned-Memory-Blocks.html
Fixes: 47e1758692 ("glcpp: use the linear allocator for most objects")
Bug: https://bugs.gentoo.org/636326
Reviewed-by: Eric Anholt <eric@anholt.net>
For example the following type of thing is seen in TCS from
a number of Vulkan and DXVK games:
vec1 32 ssa_557 = deref_var &oPatch (shader_out float)
vec1 32 ssa_558 = intrinsic load_deref (ssa_557) ()
vec1 32 ssa_559 = deref_var &oPatch@42 (shader_out float)
vec1 32 ssa_560 = intrinsic load_deref (ssa_559) ()
vec1 32 ssa_561 = deref_var &oPatch@43 (shader_out float)
vec1 32 ssa_562 = intrinsic load_deref (ssa_561) ()
intrinsic store_deref (ssa_557, ssa_558) (1) /* wrmask=x */
intrinsic store_deref (ssa_559, ssa_560) (1) /* wrmask=x */
intrinsic store_deref (ssa_561, ssa_562) (1) /* wrmask=x */
No shader-db changes on i965 (SKL).
vkpipeline-db results RADV (VEGA):
Totals from affected shaders:
SGPRS: 7832 -> 7728 (-1.33 %)
VGPRS: 6476 -> 6740 (4.08 %)
Spilled SGPRs: 0 -> 0 (0.00 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Private memory VGPRs: 0 -> 0 (0.00 %)
Scratch size: 0 -> 0 (0.00 %) dwords per thread
Code Size: 469572 -> 456596 (-2.76 %) bytes
LDS: 0 -> 0 (0.00 %) blocks
Max Waves: 989 -> 960 (-2.93 %)
Wait states: 0 -> 0 (0.00 %)
The Max Waves and VGPRS changes here are misleading. What is
happening is a bunch of TCS outputs are being optimised away as
they are now recognised as unused. This results in more varyings
being compacted via nir_compact_varyings() which can result in
more register pressure when they are not packed in an optimal way.
This is an existing problem independent of this patch. I've run
some benchmarks and haven't noticed any performance regressions
in affected games.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Previously the debug would be:
libEGL debug: No DRI config supports native format 0x20203852
libEGL debug: No DRI config supports native format 0x38385247
but
libEGL debug: No DRI config supports native format R8
libEGL debug: No DRI config supports native format GR88
is a lot easier to understand.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This requires that the caller make a little (stack) allocation to store
the string.
v2: Use gbm_format_canonicalize (suggested by Daniel)
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
There are two problems:
1) the extra underscore in MISSING_64BIT_ATOMICS
2) we should link with libatomic if the previous test decided we needed
it
Fixes: d1992255bb
("meson: Add build Intel "anv" vulkan driver")
Reviewed-and-Tested-by: Matt Turner <mattst88@gmail.com>
regs is only set and used on x86; on other platforms (like ARM), this
code causes a trivial warning, solved by moving the regs declaration to
the architecture-dependent usage.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
meson does this for you with its warn levels, so we don't need to set
it ourselves.
Fixes: d1992255bb
("meson: Add build Intel "anv" vulkan driver")
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
We're about to introduce AYUV support which provides its own alpha
channel. So give alpha as a parameter and set it to 1 on exising
formats.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Only needed when the pipeline actually uses tessellation. I don't
think that changes anything, except improving readability.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This can occur during payload setup of SIMD-split send message
instructions, which can lead to the emission of header setup
instructions with a non-zero channel group and fixed SIMD width. Such
instructions could end up using undefined channel enable signals
except they don't care since they're always marked force_writemask_all.
Not known to affect correctness of any workload at this point, but it
would be trivial to back-port to stable if something comes up.
Reported-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Sagar Ghuge <sagar.ghuge@intel.com>
Just break out of the loop instead, it does the same thing.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Reviewed-by: Axel Davy <davyaxel0@gmail.com>
This fixes various crashes and hangs when using nine's 'thread_submit'
feature.
On 64bit, the thread function's data argument would just be NULL.
On 32bit, the data argument would be garbage depending on the compiler
flags (in my case -march>=core2).
Fixes: f3fa7e3068 ("st/nine: Use WINE thread for threadpool")
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Andre Heider <a.heider@gmail.com>
Reviewed-by: Axel Davy <davyaxel0@gmail.com>
It seems I missed some details when exposing NV_conditional_render
on GLES; this fixes up "make check".
Fixes: 5213be9fab ("mesa: expose NV_conditional_render on GLES")
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-and-Tested-by: Eric Engestrom <eric.engestrom@intel.com>
Helpful for debugging compiler backend problems: this allows us to
easily retrieve the LLVM IR from RenderDoc.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
The extension spec has been updated to include GLES 2 support, so let's
enable it there.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
nir_alu_type_get_type_size takes a type as parameter and we were
passing a bit-size instead, which did what we wanted by accident,
since a bit-size of zero matches nir_type_invalid, which has a
size of 0 too.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
SIMD16 instructions need to have additional interferences to prevent
source / destination hazards when the source and destination registers
are off by one register.
While we already have code to handle this, it was only running for SIMD16
dispatches, however, we can have SIDM16 instructions in a SIMD8 dispatch.
An example of this are pull constant loads since commit b56fa830c6,
but there are more cases.
This fixes a number of CTS test failures found in work-in-progress
tests that were hitting this situation for 16-wide pull constants
in a SIMD8 program.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Because we only have one file_max for the (2d) gs input file, the value
actually represents the max of attrib and vertex index (although I'm
not entirely sure if we really want the max, since the max valid value
of the vertex dimension can be easily deduced from the input primitive).
Thus in cases where the number of inputs is higher than the number of
vertices per prim, we did not properly clamp the vertex index, which
would result in out-of-bound fetches, potentially causing segfaults
(the segfaults seemed actually difficult to trigger, but valgrind
certainly wasn't happy). This might have happened even if the shader
did not actually try to fetch bogus vertices, if the fetching happened
in non-active conditional clauses.
To fix simply use the correct max vertex index value (derived from
the input prim type) instead when clamping for this case.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Fixes Skqp's unitTest_EGLImageTest test.
For Intel platforms, we support external textures only for EGLImages
created with EGL_EXT_image_dma_buf_import. This restriction seems to
be Intel specific and not present for other platforms.
While running SKQP test - unitTest_EGLImageTest, GL_INVALID is sent
to the test because of this restriction.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105301
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Use #pragma warning(off) and #pragma warning(on) to disable or enable
all warnings. This is a big hammer. If we ever need a smaller hammer,
we can enhance this functionality.
There is one lame thing about this. Because we parse everything, create
an AST, then convert the AST to GLSL IR, we have to treat the #pragma
like a statment. This means that you can't do something like
' void
' #pragma warning(off)
' __foo
' #pragma warning(on)
' (float param0);
Fixing that would, as far as I can tell, require a huge amount of work.
I did try just handling the #pragma during parsing (like we do for
state for the whole shader.
v2: Fix the #pragma lines in the commit message that git-commit ate.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
As of this commit, all uses of const sources either go through a
nir_src_as_<type> helper which handles bit sizes correctly or else are
accompanied by a nir_src_bit_size() == 32 assertion to assert that we
have the size we think we have.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
As of this commit, all uses of const sources either go through a
nir_src_as_<type> helper which handles bit sizes correctly or else are
accompanied by a nir_src_bit_size() == 32 assertion to assert that we
have the size we think we have.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Everywhere we handle SSBO intrinsics, we have exactly the same pattern
for computing the index so we may as well make a helper for it. We also
add a get_nir_src_imm to vec4 and use it for SSBO offsets.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
HTILE is supported on these chips, not sure how I missed that.
This restores using PFP_SYNC_ME when LOAD_CONTEXT_REG is not used.
Fixes: f425d9ee74 ("radv: use LOAD_CONTEXT_REG when loading fast clear values")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This avoids syncing the Micro Engine. This is only supported
for VI+ currently. There is probably a way for using
LOAD_CONTEXT_REG on previous chips but that could be done later.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
GLXCreate{,New}Context, like most X resource creation requests, does not
emit a reply and therefore is emitted into the X stream asynchronously.
However, unlike most resource creation requests, the GLXContext we
return is a handle to library state instead of an XID. So if context
creation fails for any reason - say, the server doesn't support indirect
contexts - then we will fail in strange places for strange reasons.
We could make every GLX entrypoint robust against half-created contexts,
or we could just verify that context creation worked. Reuse the
__glXIsDirect code to do this, as a cheap way of verifying that the
XID is real.
glXCreateContextAttribsARB solves this by using the _checked version of
the xcb command, so effectively this change makes the classic context
creation paths as robust as CreateContextAttribs.
v2: Better use of Bool, check that error != NULL first (Olivier Fourdan)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
In function 'uint8_t nv50_ir::getTEXSMask(uint8_t)':
warning: control reaches end of non-void function [-Wreturn-type]
Reported-by: Moiman@freenode
Fixes: f821e80213
"gm107/ir: use scalar tex instructions where possible"
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
TEXS, TLD4 and TLD4S are variants of tex instructions which are more
scalar, which gives RA more freedom and is less likely to insert silly
MOVs to satisfy quad registers.
shader-db changes:
total instructions in shared programs : 7687265 -> 7614782 (-0.94%)
total gprs used in shared programs : 803620 -> 798045 (-0.69%)
total shared used in shared programs : 639636 -> 639636 (0.00%)
total local used in shared programs : 24648 -> 24648 (0.00%)
total bytes used in shared programs : 82103400 -> 81330696 (-0.94%)
local shared gpr inst bytes
helped 0 0 3648 10647 10647
hurt 0 0 464 205 205
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
The biggest change here is the rename of VK_NVX_ray_tracing to
VK_NV_ray_tracing and the total removal of VK_KHR_mir_surface.
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Enables on R600 and makes pass:
dEQP-GLES31.functional.srgb_texture_decode.skip_decode.sr8.*
dEQP-GLES31.functional.texture.filtering.cube_array.formats.sr8*
v2: remove chunk for dri/radeon (Emil)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Allocating through Gralloc implies buffers are going to be used
outside the driver. We have special MOCS settings for external BOs and
we probably want to use them here too.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: a1220e7311 ("anv/android: Set the BO flags in bo_cache_import (v2)")
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
This reduces the amount of #ifdef ANDROID we'll have to have inside
the driver. Potentially offering better coverage of the android
extensions.
v2: Move anv_android.h include before anv_entrypoints.h (Tapani)
Fix autotools android build (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
At higher resolutions with the addition of MSAA, the number of tiles
can increase to the point where we use more than one VSC pipe per
tile. Which would cause us to calculate an out-of-bounds offset for
VSC_SIZE_ADDRESS. So don't try to be clever, just always put it at
a fixed offset assuming the max 32 VSC pipes in use.
Signed-off-by: Rob Clark <robdclark@gmail.com>
After commit a9fb331ea ("wayland/egl: update surface size on window
resize"), the surface size is updated as soon as the resize is done, and
`update_buffers()` would resize only if the surface size differs from
the attached size.
However, in the case of swrast, there is no resize callback and the
attached size is updated in `dri2_wl_swrast_commit_backbuffer()` prior
to the `swrast_update_buffers()` so the attached size is always up to
date when it reaches `swrast_update_buffers()` and the surface is never
resized.
This can be observed with "totem" using the GDK backend on Wayland (the
default) when running on software rendering:
$ LIBGL_ALWAYS_SOFTWARE=true CLUTTER_BACKEND=gdk totem
Resizing the window would leave the EGL surface size unchanged.
To avoid the issue, partially revert the part of commit a9fb331ea for
`swrast_update_buffers()` and resize on the win size and not the
attached size.
Fixes: a9fb331ea - wayland/egl: update surface size on window resize
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
CC: Daniel Stone <daniel@fooishbar.org>
CC: Juan A. Suarez Romero <jasuarez@igalia.com>
CC: mesa-stable@lists.freedesktop.org
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
If the user provides an invalid display or device the ToVendor lookup
will fail.
In this case, the local [Mesa vendor] error code will be set. Thus on
sequential eglGetError(), the error will be EGL_SUCCESS.
To be more specific, GLVND remembers the last vendor and calls back
into it's eglGetError, although there's no guarantee to ever have had
one.
v2:
- Add _eglError call, so the debug callback is executed (Kyle)
- Drop XXX comment.
Piglit: tests/egl/spec/egl_ext_device_query
Fixes: ce562f9e3f ("EGL: Implement the libglvnd interface for EGL (v3)")
Cc: Eric Engestrom <eric@engestrom.ch>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Kyle Brenneman <kbrenneman@nvidia.com>
eglQueryDevicesEXT (unlike the other three functions) does not depend
on the display. It is implemented in GLVND, which calls into each
driver collecting the list of devices and presenting it to the user.
For the other entrypoints, GLVND acts as pass through stub calling into
the vendor library. The vendor implementation calls back into GLVND to
get the vendor dispatch. Then the driver proceeds to call itself via
the said dispatch.
This design makes is possible to keep using "old" GLVND with newer
vendor drivers. Since effectively all the extension code is within the
latter itself.
Without said entrypoints, any user will outright crash - as reported in
the bug report.
Note: there's a follow-up fix needed to our GLVND code, to make piglit
happy.
v2: add some beefy documentation in the commit message.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108635
Fixes: 7552fcb7b9 ("egl: add base EGL_EXT_device_base implementation")
Reported-by: kyle.devir@mykolab.com
Cc: kyle.devir@mykolab.com
Acked-by: Eric Engestrom <eric@engestrom.ch>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Emil Velikov <emil.velikov@collabora.com>
We can only map at page aligned offsets. We got that wrong with buffer
size where (size % 4096) != 0 (anv has a WA buffer of 1024).
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
The spec says:
"vkCmdCopyQueryPoolResults is considered to be a transfer
operation, and its writes to buffer memory must be synchronized
using VK_PIPELINE_STAGE_TRANSFER_BIT and VK_ACCESS_TRANSFER_WRITE_BIT
before using the results."
VK_PIPELINE_STAGE_TRANSFER_BIT will wait for compute to be idle,
while VK_ACCESS_TRANSFER_WRITE_BIT will invalidate both L1 vector
caches and L2. So, it's useless to set those flags internally.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
In the non-SSO case, where multiple shader stages are linked together,
we were recording garbage pipe_stream_output_info structures for all
but the last enabled geometry-processing stage.
Specifically, we were using the gl_transform_feedback_info from
shader_program->last_vert_prog (the stage whose outputs will be
recorded)...but were pairing it with the output varying mappings
from the current shader stage. For example, a program with a VS and
GS, the VS's pipe_shader_state would have a pipe_stream_output_info
based on the GS transform feedback info, but the VS output mapping.
This generally worked out okay because only the pipe_stream_output_info
for the last stage really matters - the others can be ignored. However,
we'd like to avoid confusing the pipe driver. In particular, my new
driver translates the stream out information to hardware packets at
bind_{vs,tes,gs}_state() time...and was hitting asserts about garbage
varyings that didn't exist.
This patch changes st/mesa to record a blank pipe_stream_output_info
with num_outputs = 0 for all stages prior to last_vert_prog. The last
one is captured as normal.
(In the fully-SSO case, nothing should change - each program contains
a single shader stage, so last_vert_prog *is* the current shader.)
Tested with llvmpipe (piglit's gpu profile), and freedreno (a3xx,
gpu profile with -t transform.feedback). Fixes several hundred CTS
tests on my new driver.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
There are some cases where the VS is the only stage enabled, it uses the
entire URB, and the URB is large enough that placing later stages after
the VS exceeds the number of bits for "URB Starting Address".
For example, on Icelake GT2, "varying-packing-simple mat2x4 array" from
Piglit is getting a starting offset of 128 for the GS/HS/DS. But the
field is only large enough to hold an offset of 127.
i965 doesn't hit any genxml assertions because it's still using the old
OUT_BATCH mechanism. 128 << GEN7_URB_STARTING_ADDRESS_SHIFT (57) == 0,
with the extra bit falling off the end. So we place the disabled stage
at the beginning of the URB (overlapping with push constants). This is
likely okay since it's a zero size region (0 entries).
It seems like the Vulkan driver might hit this assertion, however, and
the situation seems harmless. To work around this, always place
disabled stages at the start of the URB, so the last enabled stage can
fill the remaining space without overflowing the field.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
libmesa_git_sha1 whole static dependency is added to get git_sha1.h header
and avoid following building error:
external/mesa/src/amd/vulkan/radv_device.c:46:10:
fatal error: 'git_sha1.h' file not found
^
1 error generated.
Fixes: 9d40ec2cf6 ("radv: Add support for VK_KHR_driver_properties.")
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
In some cases (not building with llvm, which automatically pulls in
pthreads) nine needs to be directly linked with pthreads. Fixes building
on x86 (32 bit) without llvm.
Distro bug: https://bugs.gentoo.org/670094
Fixes: 6b4c7047d5
("meson: build gallium nine state_tracker")
Tested-by: Rafal Lalik <rafallalik@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
WA_1606682166:
Incorrect TDL's SSP address shift in SARB for 16:6 & 18:8 modes.
Disable the Sampler state prefetch functionality in the SARB by
programming 0xB000[30] to '1'. This is to be done at boot time and
the feature must remain disabled permanently.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
In the same spirit as commit a5889d70f2
"i965/icl: Disable binding table prefetching". Fixes some 110+
intermittent piglit failures with tex-miplevel-selection variants.
WA_1606682166:
Incorrect TDL's SSP address shift in SARB for 16:6 & 18:8 modes.
Disable the Sampler state prefetch functionality in the SARB by
programming 0xB000[30] to '1'. This is to be done at boot time and
the feature must remain disabled permanently.
Anuj: Set SamplerCount = 0 for vs, gs, hs, ds and wm units as well.
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Cc: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We cannot use nir_build_alu() to create the new alu as it has no
way to know how many components of the src we will use. This
results in it guessing the max number of components from one of
its inputs.
Fixes the following CTS tests:
dEQP-VK.spirv_assembly.instruction.graphics.selection_block_order.out_of_order_frag
dEQP-VK.spirv_assembly.instruction.graphics.selection_block_order.out_of_order_geom
dEQP-VK.spirv_assembly.instruction.graphics.selection_block_order.out_of_order_tessc
dEQP-VK.spirv_assembly.instruction.graphics.selection_block_order.out_of_order_vert
Fixes: 2975422ceb ("nir: propagates if condition evaluation down some alu chains")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
To avoid build error in u_debug_stack_android.cpp
due to now missing u_debug.h header:
external/mesa/src/gallium/auxiliary/util/u_debug_stack_android.cpp:26:10:
fatal error: 'u_debug.h' file not found
#include "u_debug.h"
^
1 error generated.
Fixes: 37db383abb ("util: Move u_debug to utils")
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
The bind flags defined by mesa/gallium might not always be in sync
with the ones copied to virglrenderer/gallium. Therefore, use the
flags defined in virgl like it is done for all the other calls to
create resources.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This only adds support on the Gallium core level, for the drivers
it is likely that additional changes are needed to support the
new texture format and thereby enabling the extension.
Enables on softpipe and makes pass:
dEQP-GLES31.functional.srgb_texture_decode.skip_decode.sr8.*
v2: - add include for getting GL_SR8_EXT
v4: - since the extension is not required don't bother providing
a fallback (Ilia Mirkin)
- split patch (2/2) to separate Gallium and mesa/st parts
(Roland Scheidegger)
- trim commit message to only contain the history of the patch
relevant to this part
v5: - don't include GLES headers (required enum has been added to glheader.h)
(Ilia Mirkin)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
This format is needed to support EXT_texture_sRGB_R8. THe patch adds a new
format enum, the format entries in Gallium and and svga, the mapping between
sRGB and linear formats, and tests.
v2: - add mapping to linear format for PIPE_FORMATR_R8_SRGB
v3: - Add texture format to svga format table since otherwise building
mesa will fail when this driver is enabled. It was not tested
whether the extension actually works.
v4: - svga: remove the SVGA specific format definitions and table entries
and only add correct the location of PIPE_FORMAT_R8_SRGB in the
format_conversion_table (Ilia Mirkin)
- Split patch (1/2) to separate Gallium part and mesa/st part.
(Roland Scheidegger)
- Trim the commit message to only contain the relevant parts from the
split.
v5: - svga: correct location of PIPE_FORMAT_SRGB_R8 (Ilia Mirkin)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
v2: - fix format definition line
- disable for desktop GL
- don't add GL_R8_EXT to glext.h since it is already in
GLES2/gl2ext.h in glext.h and include this header where needed
(all Emil)
v3: - swrast: Fill the function table for sRGB_R8
The size of the function table is checked at compile time and must
correspond to the number of mesa texture formats.
dri/swrast being gles-2.0 doesn't support the extension though
v4: - correct format layout comment (Ilia Mirkin)
- correct logic for accepting GL_RED only textures (in part Ilia Mirkin)
EXT_texture_sRGB_R8 requires OpenGL ES 3.0 which includes
ARB_texture_rg/EXT_texture_rg, so one only must check for the first
when SR8_EXT is really requested.
v5: - add define for GL_ES8_XT to glheader.h and don't include GLES
headers (Ilia Mirkin)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
The GLSL 4.6 specification (section 4.1.14. "Implicit Conversions")
says:
"There are no implicit array or structure conversions. For
example, an array of int cannot be implicitly converted to an
array of float."
So let's add a check in place when assigning array initializers to
implicitly sized arrays, to avoid incorrectly allowing code on the
form:
int[] foo = float[](1.0, 2.0, 3.0)
This fixes the following dEQP test-cases:
- dEQP-GLES31.functional.shaders.implicit_conversions.es31.invalid.arrays.int_to_float_vertex
- dEQP-GLES31.functional.shaders.implicit_conversions.es31.invalid.arrays.int_to_float_fragment
- dEQP-GLES31.functional.shaders.implicit_conversions.es31.invalid.arrays.int_to_uint_vertex
- dEQP-GLES31.functional.shaders.implicit_conversions.es31.invalid.arrays.int_to_uint_fragment
- dEQP-GLES31.functional.shaders.implicit_conversions.es31.invalid.arrays.uint_to_float_vertex
- dEQP-GLES31.functional.shaders.implicit_conversions.es31.invalid.arrays.uint_to_float_fragment
- dEQP-GLES31.functional.shaders.implicit_conversions.es32.invalid.arrays.int_to_float_vertex
- dEQP-GLES31.functional.shaders.implicit_conversions.es32.invalid.arrays.int_to_float_fragment
- dEQP-GLES31.functional.shaders.implicit_conversions.es32.invalid.arrays.int_to_uint_vertex
- dEQP-GLES31.functional.shaders.implicit_conversions.es32.invalid.arrays.int_to_uint_fragment
- dEQP-GLES31.functional.shaders.implicit_conversions.es32.invalid.arrays.uint_to_float_vertex
- dEQP-GLES31.functional.shaders.implicit_conversions.es32.invalid.arrays.uint_to_float_fragment
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
EXT_shader_implicit_conversions adds support for implicit conversions
for GLES 3.1 and above.
This is essentially a subset of ARB_gpu_shader5, and augments
OES_gpu_shader5.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
In GLES, we currently either need an exact match with a local function,
or an exact match with a builtin.
However, if we add support for implicit conversions for GLES shaders,
we also need to fall back to a non-exact match in the case where there
were no builtin match either.
Luckily, we already have a variable ready with this, so let's just
return it if the builtin-search failed.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
This makes the code a bit easier to read, as well as reduces repetition,
especially when we add support for EXT_shader_implicit_conversions.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
This makes the code a bit easier to read, as well as will reduce
repetition when we add support for EXT_shader_implicit_conversions.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
If the user gives 0 counterBuffers then the driver should still
enable transform feedback on all targets. This changes the
driver to always enable xfb, and use counter buffers where
one is defined for the target in question.
Fixes: b4eb029062 (radv: implement VK_EXT_transform_feedback)
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
In order to handle pause/resume properly, the offset should
be added to the buffer binding not to the begin/end paths.
v2: don't add offset to size
Fixes ext_transform_feedback-alignment* under zink
Fixes: b4eb029062 (radv: implement VK_EXT_transform_feedback)
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Since 0c1dd9dee0 ("broadcom/vc4: Allow importing linear BOs with
arbitrary offset/stride."), we have the vc4-side BO properly laid out
(assuming it's linear) in the winsys BO so that we can skip this extra
copy.
The recompile reduction is nice, but this also makes it so that a straight
texture copy could get optimized some day to not unpack/repack the f16
values.
If the caller has passed in a stride for (linear) BO import, we should use
that stride when rendering to the BO (or, if we some day support texturing
from linear-imported BOs, when doing the linear-to-UIF shadow copy). This
lets us remove the extra stride-changing relayout in the simulator.
This came from vc4, where we had a file format for GPU hangs. I don't
have one of those for V3D, and I probably won't ever have the simulator
side produce dumps even if I do.
Some environment (like Travis apparently) set LC_* vars, messing up the
sort ordering, so let's use envvar with the highest priority to make
sure this is actually sorted in ASCII order.
Suggested-by: Michel Dänzer <michel@daenzer.net>
Fixes: b42dc50a5f "egl: fix entrypoint sorting test"
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Some memory and file descriptors are not freed/closed.
v2: fixed case where we skipped the 'aub' variable initialization
Signed-off-by: Andrii Simiklit <andrii.simiklit@globallogic.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Ported from RadeonSI. It's always TRUE for CIK+ because RADV
doesn't support 16 samples.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Some of these functions were distributed across different
implementation and header files. Put them at a central place.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
The array type draw is no longer directly dependent on the vbo module.
Thus move array type draws into mesa/main/draw.c.
Rename symbols starting with vbo_* to _mesa_* and apply some
reindenting to make it consistent.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
These calls are just the same in each if branch. So pull that
before the if.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
With this change we preserve the no_current_update property when we
observe a glPrimitiveRestart call. That means that we now also get the
no_current_update optimization for display lists that are made
out of indexed draws using primitive restart.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Instead of coding additional information into the primitive
mode, make the only remaining flag there a direct argument to
vbo_save_NotifyBegin.
v2: Fix incorrect no_current_update in glRectf.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
The _mesa_prim::no_current_update flag should tell the compiled
display list if the current attributes that are placed in the dlists
vbo shall take a defined state past replay of a display list.
Immediate mode draws compiled into display lists should set the
current values. Array draws may leave the current values in
undefined state.
So finally this flag is not a property of every primitive
but it is a property of the compiled display list and there it
is a property of the last primitive compiled into the list.
So move the flag out of _mesa_prim into vbo_save.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
The previous patch left a constant if (0) in the code.
Clean that up now.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
When setting the _mesa_prim::mode field we always filter out
all non OpenGL primitive mode bits. So this tested bit cannot be
there anymore and the test evaluates to zero.
The zero is removed with the next patch to ease review.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Now looking at the implementation of vbo_save_NotifyBegin.
The VBO_SAVE_PRIM_WEAK flag, delivered in the primitive mode
argument to vbo_save_NotifyBegin, is not evaluated anymore.
The two users of the mode argument are the primitive mode
itself, where the VBO_SAVE_PRIM_WEAK bit is masked out to
retrieve the underlying OpenGL primitive mode. The other
user is to check for the VBO_SAVE_PRIM_NO_CURRENT_UPDATE bit
which is different from VBO_SAVE_PRIM_WEAK.
So, since vbo_save_NotifyBegin does not care about
VBO_SAVE_PRIM_WEAK, we can savely remove it from the call
arguments of vbo_save_NotifyBegin.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
The only reader of the weak field in _mesa_prim is pretty
console printing. By that, remove the weak field from _mesa_prim.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
On finishing a display list playback the VBO_SAVE_FALLBACK bit
is still kept in vbo_save_context::replay_flags. But examining
replay_flags and the display list flags that feed this value
the corresponding bit is never set these days anymore.
So, since it is nowhere set or checked, we can safely remove it.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
One cannot have haiku and dri2 - surfaceless,x11,etc.
Group things up, which will make the addition of platform_device a bit
easier.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Now that we support the extensions, fully, enabled them.
The specs mandate that we always have at least one device and each dpy
has a device associated with it.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
This is the final requirement from the base EGLDevice spec.
v2:
- split from another patch
- move wayland hunk after we have the fd
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Add implementation based around the drmDevice API. As such it's only
available only when building with libdrm. With the latter already a
requirement when using !SW code paths in the platform code.
Note: the current code will work if a device is hot-plugged. Yet
hot-unplugged is not implemented, since I have no ways of testing it.
v2:
- ddd some _eglDeviceSupports checks
- require DRM_NODE_RENDER
- add _eglGetDRMDeviceRenderNode helper
v3:
- flip inverted asserts (Mathias)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Add a plain software device, which is always available.
We can safely assign it as the first/initial device in _eglGlobals,
although we ensure that's the case with a handful of _eglDeviceSupports
checks throughout the code.
v2:
- s/_eglFindDevice/_eglAddDevice/ (Eric)
- s/_eglLookupAllDevices/_eglRefreshDeviceList/ (Eric)
- move ^^ helpers into a earlier patch (Eric, Mathias)
- set the SW device on _eglGlobal init. (Eric)
- add a number of _eglDeviceSupports checks (Mathias)
- split Device/Display attach to a separate patch
v3:
- flip inverted asserts (Mathias)
- s/on-stack/static/ (Mathias)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
The device extension string is expected to contain the name of the
extension defining what kind of device it is, so the caller can know
what kinds of operations it can perform with it. So that string had
better be non-empty, hence this trivial extension.
v2:
- drop "fallback", update history and update contributor list
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Introduce the API for device query and enumeration. Those at the moment
produce nothing useful since zero devices are actually available.
That contradicts with the spec, so the extension isn't advertised just
yet.
With later commits we'll add support for software (always) and hardware
devices. Each one exposing the respective extension string.
v2:
- fold API boilerplate into this patch
- move _eglAddDevice, _eglDeviceSupports, _eglRefreshDeviceList to this
patch (Eric, Mathias)
- make _eglFiniDevice the one called last
v3:
- comment on the dummy _egl_device_extension enum entry (Eric)
- annotate dev as MAYBE_UNUSED (Mathias)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Write down both X and GLX visual types when mapping from one to the
other. Makes grepping through the code a tiny bit easier.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Earlier commit flipped the default to python2 but forgot to update the
travis file. Props to pip caching things "worked" for a little while.
Fixes: f22ad5ef18 ("travis: use python3 for the autoconf builds")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
This is incorrect, the offset is into the buffer, and it's legal
to write
loc 0,0 -> buffer0, offset 0
loc 0,1 -> buffer1, offset 0
This fixes a bunch of piglits running on my zink xfb code on
radv.
Fixes: 6c21645046 (radv: emit stream outputs for vertex and tessellation stages)
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Instead of using a while loop with indexing. This is much cleaner. This
requires some other small changes.
Acked-by: Emil Velikov <emil.velikov@collabora.com>
This is a very common python anti-pattern. Not using length allows us to
go through faster C paths, but has the same meaning.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Using shell redirection to write to a file is more complicated than
necessary, and has the potential to run into unicode encoding problems.
It's also less code.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108530
v2: - update commit message to say less about LANG=C
- use flags instead of positional arguments for the script (Emil)
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
gen_xmlpool uses a style unlike the rest of mesa, spaces between
function/method calls and the parens, strange whitespace to force lining
up method calls, and some other whitespace stuff. Since I'm going to be
doing some work in the file, I'm going to start cleaning those up.
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Meson won't put the .gmo files in the layout that python's
gettext.translation() expects, it puts them in the build directory in a
flat layout. This modifies android and autotools to do the same (scons
doesn't work with translations at all)
v3: - Squash 4 patches into this patch
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Meson has handy a handy built-in module for handling gettext called
i18n, this module works a bit differently than our autotools build does,
namely it doesn't automatically generate translations instead it creates
3 new top level targets to run. These are:
xmlpool-pot
xmlpool-update-po
xmlpool-gmo
v2: - Add new files to autotools dist tarball
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This is a little cleaner than just looking at sys.argv, but it's also
going to allow us to handle the differences in the way meson and
autotools handle translations more cleanly.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
We need to update the cursor before we check if the alu use is
dominated by the if condition. Previously we were checking if
the current location of the alu instruction was dominated by
the if condition which would miss some optimisation opportunities.
Fixes: a3b4cb3458 ("nir/opt_if: Rework condition propagation")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This patch fixes this freedreno autotools build error.
CXXLD ir3_compiler
/usr/lib/valgrind/libcoregrind-amd64-linux.a(libcoregrind_amd64_linux_a-m_main.o): In function `_start':
(.text+0x0): multiple definition of `_start'
/usr/lib/gcc/x86_64-linux-gnu/7/../../../x86_64-linux-gnu/Scrt1.o:(.text+0x0): first defined here
/usr/bin/ld: /usr/lib/valgrind/libcoregrind-amd64-linux.a(libcoregrind_amd64_linux_a-m_main.o): relocation R_X86_64_32S against undefined symbol `vgPlain_interim_stack' can not be used when making a PIE object; recompile with -fPIC
/usr/bin/ld: /usr/lib/valgrind/libcoregrind-amd64-linux.a(libcoregrind_amd64_linux_a-m_trampoline.o): relocation R_X86_64_32 against `.text' can not be used when making a PIE object; recompile with -fPIC
/usr/bin/ld: /usr/lib/valgrind/libcoregrind-amd64-linux.a(libcoregrind_amd64_linux_a-dispatch-amd64-linux.o): relocation R_X86_64_32S against symbol `vgPlain_stats__n_xindirs_32' can not be used when making a PIE object; recompile with -fPIC
/usr/bin/ld: final link failed: Nonrepresentable section on output
collect2: error: ld returned 1 exit status
Fixes: f3cc0d2747 ("freedreno: import libdrm_freedreno + redesign submit")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108595
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Pretty much all of the scripts are python2+3 compatible.
Check and allow using python3, while adjusting the PYTHON2 refs.
Note:
- python3.4 is used as it's the earliest supported version
- python2 chosen prior to python3
v2: use python2 by default
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
gtest is an external project that is copied in this tree for technical
reasons, but isn't maintained by us, so its warnings are irrelevant.
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
This is an external project we have no control over, and will not be
fixing (other than by sometimes pulling the latest sources), so warnings
serve no purpose here.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Since commit "intel/compiler: Stop assuming the entrypoint is called
"main"" there is no need to force the entrypoint name to be "main".
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Patch does a 'dry run' of assign_attribute_or_color_locations before
optimizations to catch cases where we have aliasing of unused attributes
which is forbidden by the GLSL ES 3.x specifications.
We need to run this pass before unused attributes may be removed and with
attribute binding information from program, therefore we re-use existing
pass in linker rather than attempt to write another one.
This fixes WebGL2 test 'gl-bindAttribLocation-aliasing-inactive' and
Piglit test 'gles-3.0-attribute-aliasing'.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106833
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This is a revert of Marek's 2cb9ab53dd revert.
It was needed to revert the previous commit, and didn't have any issue
itself.
--
The "DRI2" name was reported as confusing when printing EGL infos (one
user reported thinking DRI3 was not working on his X server), and the
only alternative is Haiku, which can only be used on a Haiku machine.
The name therefore doesn't add any information that the user wouldn't
know already, so let's just drop it.
Suggested-by: Emil Velikov <emil.l.velikov@gmail.com>
Related-to: b174a1ae72 ("egl: Simplify the "driver" interface")
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This is a revert of Marek's 84f3afc2e1 revert, with a missing
line added back. I failed a rebase and dropped that crucial line, and
didn't do a runtime test after my rebase, and as a result broke EGL for
everyone.
This commit has been tested by Intel's CI and I re-read it once more, so
it should be good this time.
--
Note: dropping the EGL_BAD_ALLOC in egl_haiku because it's
overwritten by the EGL_NOT_INITIALIZED in eglInitialize().
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This reverts commit 773d6ea6e7.
Since kernel 4.17 (drm/etnaviv: remove the need for a gpu-subsystem DT
node) the etnaviv DRM driver doesn't have an associated DT node
anymore. This is technically correct, as the etnaviv device is a
virtual device driving multiple hardware devices.
Before 4.17 the userspace had access to the following information:
DRIVER=etnaviv
OF_NAME=gpu-subsystem
OF_FULLNAME=/gpu-subsystem
OF_COMPATIBLE_0=fsl,imx-gpu-subsystem
OF_COMPATIBLE_N=1
MODALIAS=of:Ngpu-subsystemT<NULL>Cfsl,imx-gpu-subsystem
DRIVER=imx-drm
OF_NAME=display-subsystem
OF_FULLNAME=/display-subsystem
OF_COMPATIBLE_0=fsl,imx-display-subsystem
OF_COMPATIBLE_N=1
Afer 4.17:
DRIVER=etnaviv
MODALIAS=platform:etnaviv
The OF node has never been part of the etnaviv UABI, simply due to the
fact that it's still possible to instantiate the etnaviv driver from a
platform file, instead of a devicetree node.
A patch set to fix this problem was send out [1] but it looks like
that a proper solution needs more time to bake.
[1] https://lists.freedesktop.org/archives/dri-devel/2018-October/194651.html
Suggested-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
I don't think we want to wait for something that hasn't been
correctly submitted. This is similar to the fallback path.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This isn't true for Vulkan so we have to whack it to "main" in anv which
is silly. Instead of walking the list of functions and asserting that
everything is named "main" and hoping there's only one function named
"main", just use the nir_shader_get_entrypoint() helper which has better
assertions anyway.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
ffs() just returns the bit that is set, we need to know what
stage that bit represents so use u_bit_scan() instead.
Fixes: 2ca5d9548f ("st/glsl_to_nir: gather next_stage in shader_info")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This isn't used in mesa, maybe vmware uses this in a closed source state
tracker?
Tested-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
In order to pull u_debug into src/util we need to break the generically
useful bits from the bits that are tightly coupled to gallium.
Tested-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
amdgpu doesn't use the INPUT but the AVERAGE subfeature:
$ sensors -u
amdgpu-pci-0100
Adapter: PCI adapter
power1:
power1_average: 17.233
power1_cap: 180.000
Signed-off-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Dual source blending behaviour is undefined when shader doesn't
have second color output.
"If SRC1 is included in a src/dst blend factor and
a DualSource RT Write message is not used, results
are UNDEFINED. (This reflects the same restriction in DX APIs,
where undefined results are produced if “o1” is not written
by a PS – there are no default values defined)."
Dismissing fragment in such situation leads to a hang on gen8+
if depth test in enabled.
Since blending cannot be gracefully fixed in such case and the result
is undefined - blending is simply disabled.
v2 (Jason Ekstrand):
- Apply the workaround to each individual entry
- Emit a warning through debug_report
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Dual source blending behaviour is undefined when shader doesn't
have second color output, dismissing fragment in such situation
leads to a hang on gen8+ if depth test in enabled.
Since blending cannot be gracefully fixed in such case and the result
is undefined - blending is simply disabled.
v2 (Kenneth Graunke):
- Listen to BRW_NEW_FS_PROG_DATA in 3DSTATE_PS_BLEND
- Also whack BLEND_STATE[] to keep the two in sync, since we're not
sure exactly which copy of the redundant info the hardware will use.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107088
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Apparently, we're supposed to look at the texture object's built-in
sampler object's sRGB decode setting in order to decide whether to
decode/downsample/re-encode, or simply downsample as-is. Previously,
I had always done the decoding/encoding.
Fixes SKQP's Skia_Unit_Tests.SRGBMipMaps test.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
If we restore the 'new batch' using 'intel_batchbuffer_reset_to_saved'
function we must restore the default state of the batch using
'brw_new_batch' function because the 'intel_batchbuffer_flush'
function will not do it for the 'new batch' again.
At least the following fields of the batch
'state_base_address_emitted','aperture_space', 'state_used'
should be restored to default values to avoid:
1. the aperture_space overflow
2. the missed STATE_BASE_ADDRESS commad in the batch
3. the memory overconsumption of the 'statebuffer'
due to uncleared 'state_used' field.
etc.
v2: merge with new commits, changes was minimized, added the 'fixes' tag
v3: added in to patch series
Fixes: 3faf56ffbd "intel: Add an interface for saving/restoring
the batchbuffer state."
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107626
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This was required back when MSVC didn't support C99 and was missing this
header, but since MSVC 2013 (or maybe earlier?) this isn't it does and
this code isn't doing anything anymore.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
We were doing this late after nir_lower_io, but we can just reuse the core
code. By doing it at this stage, we won't even set up the VS attributes
as inputs, reducing our VPM size.
We always emit 4 slots per slot because things like color output and
position processing in the epilogue will potentially look up more values
than the variable declaration had. However, when we get a .location_frac
!= 0, we don't want to overwrite components of the following
.driver_location.
For supporting scalar VPM i/o at the NIR level, we need to do a pass over
the vars to figure out how big each attribute is after DCE. Once we've
done that, we can just walk over c->vattr_sizes[] instead of bothering
with vars.
This will be used on V3D to cut down the size of the VS inputs in the VPM
(memory area for sharing data between shader stages).
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
On older kernels, the drmGetDevice() call will wake up all the GPUs
on the system, while fetching the PCI revision.
Use the 2 version of the API and pass flags == 0, so we don't fetch the
device PCI revision, since we don't need that information.
Fixes: baa38c144f ("vulkan/wsi: Use VK_EXT_pci_bus_info for DRM fd matching")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Previously, we would create temporary variables and fill them out.
Instead, we create as many function parameters as we need and pass them
through as SSA defs.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
x86 32 bit generic target does not enable ARCH_X86_HAVE_SSE4_1
for this reason all Android library modules using SSE4_1 in mesa
are built conditionally to ARCH_X86_HAVE_SSE4_1
The same approach is now applied to libmesa_intel_tiled_memcpy_sse41
in order to avoid the following building errors:
external/mesa/src/mesa/drivers/dri/i965/intel_tiled_memcpy.c:574:15:
error: initializing '__m128i' (vector of 2 'long long' values) with an expression of incompatible type 'int'
__m128i val = _mm_stream_load_si128((__m128i *)src);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
external/mesa/src/mesa/drivers/dri/i965/intel_tiled_memcpy.c:578:15:
error: initializing '__m128i' (vector of 2 'long long' values) with an expression of incompatible type 'int'
__m128i val0 = _mm_stream_load_si128(((__m128i *)src) + 0);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
external/mesa/src/mesa/drivers/dri/i965/intel_tiled_memcpy.c:579:15:
error: initializing '__m128i' (vector of 2 'long long' values) with an expression of incompatible type 'int'
__m128i val1 = _mm_stream_load_si128(((__m128i *)src) + 1);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
external/mesa/src/mesa/drivers/dri/i965/intel_tiled_memcpy.c:580:15:
error: initializing '__m128i' (vector of 2 'long long' values) with an expression of incompatible type 'int'
__m128i val2 = _mm_stream_load_si128(((__m128i *)src) + 2);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
external/mesa/src/mesa/drivers/dri/i965/intel_tiled_memcpy.c:581:15: error: initializing '__m128i' (vector of 2 'long long' values) with an expression of incompatible type 'int'
__m128i val3 = _mm_stream_load_si128(((__m128i *)src) + 3);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
5 errors generated.
Fixes: 11b1afdc92 ("i965/tiled_memcpy: inline movntdqa loads in tiled_to_linear")
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Preliminary work for adding handling of different pipes to gen_decoder. We
need to be able to distinguish between different pipes in order to decode
the packets correctly due to opcode re-use.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Use the 'DWord Length' and 'bias' fields from the instruction definition to
parse the packet length from the command stream when possible. The hardcoded
mechanism is used whenever an instruction doesn't have this field.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This function was there when the file was introduced in commit
38f10d5a03 "intel: tools: add aubinator viewer", but was
never actually used.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Meson already automatically tracks included headers, so there's no need
to add them everywhere; cleans up the code a bit.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
This implementation should work and potential bugs can be
fixed during the release candidates window anyway.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
For all streams. We basically just need to update the
base address and compute a stride for every stream.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Same as the previous patch, except that is only the number of
components.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
For multiple streams support we have to set the different ring
buffer sizes correctly. This relies on the number of output
components per stream.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This will be used for splitting the GS->VS ring buffer. The
stream ID is always 0 for now.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This is different from the GL_ARB_spirv pass because it generates a much
simpler data structure that isn't tied to OpenGL and mtypes.h.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This doesn't include any new features but it does include an XML and
header typo fix for modifiers.
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
In the 'inorder' case (ie. FD_MESA_DEBUG=inorder, or old kernel), if the
u_blitter clear path is used (a3xx, a4xx, and some fallback cases on
newer gens), util_blitter_restore_fb_state() will set_framebuffer_state()
to something that is identical to the current fb state, which triggers
an unnecessary flush, and then eventually an assert:
(gdb) bt
#0 0x0000007fbf24a078 in kill () from /lib64/libc.so.6
#1 0x0000007fbe061278 in _debug_assert_fail (expr=0x7fbe93a820 "!batch->flushed", file=0x7fbe93a628 "../src/gallium/drivers/freedreno/freedreno_batch.c", line=491, function=0x7fbe93a990 <__func__.17380> "fd_batch_check_size") at ../src/gallium/auxiliary/util/u_debug.c:322
#2 0x0000007fbe1ccb8c in fd_batch_check_size (batch=0x55556d5a70) at ../src/gallium/drivers/freedreno/freedreno_batch.c:491
#3 0x0000007fbe1d0e08 in fd_clear (pctx=0x55555c61e0, buffers=5, color=0x55556e388c, depth=1, stencil=0) at ../src/gallium/drivers/freedreno/freedreno_draw.c:463
#4 0x0000007fbe57afa4 in st_Clear (ctx=0x55556e17b0, mask=18) at ../src/mesa/state_tracker/st_cb_clear.c:452
The assert was introduced in 4b847b38ae, so from a functionality
standpoint this patch fixes that commit. But it should also avoid an
unnecessary flush in the 'inorder' case, fixing a performance bug.
Fixes: 4b847b38ae freedreno: make fd_batch a one-shot thing
Signed-off-by: Rob Clark <robdclark@gmail.com>
ZSA state can change whether depth or stencil is enabled
This plus previous patch fix stk, and various things w/
FD_MESA_DEBUG=inorder
Fixes: ec717fc629 freedreno: reduce resource dependency tracking overhead
Signed-off-by: Rob Clark <robdclark@gmail.com>
The problem isn't directly with ec717fc629 but rather that commit
exposes the problem. When we switch batch we cannot assume previous
state is clean so we should mark all state dirty.
Fixes: ec717fc629 freedreno: reduce resource dependency tracking overhead
Signed-off-by: Rob Clark <robdclark@gmail.com>
We were previously using relative timeouts and decrementing the
user-provided timeout as we waited. Instead, this commit refactors
things to use absolute timeouts throughout. This should fix a subtle
bug in the waitAll case where we aren't decrementing the timeout after a
successful GPU wait. Since pthread_cond_timedwait already takes an
absolute timeout, it's also significantly simpler.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
It probably doesn't actually break anything but it does cause some
assertions in debug builds.
Fixes: 7a89a0d9ed "anv: Use separate MOCS settings for external BOs"
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Now that it is just called once per draw (instead of once for binning
and once for draw), let's just inline it. If nothing else, it makes
perf-annotate easier to look at.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Historically this wasn't in fdN_emit_state(), because prior to addition
of blitter in a5xx, fdN_emit_state() was also used in the clear path.
These days that is only true for a2xx (a3xx and a4xx use u_blitter). So
the reason for it not to be in fd6_emit_state() no longer exists.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Noticed that with webgl (in chromium, at least) we end up generating a
lot of no-op submits just to get a fence. Tracking the last fence and
returning that if there is no rendering since last flush avoids this.
Signed-off-by: Rob Clark <robdclark@gmail.com>
The scissor maxx/maxy are non-inclusive, so don't subtract one from
framebuffer width and height.
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
We get a warning here for assigning a const char * pointer to
char *swizzle in struct ir2_src_register. The constructor strdups a 4
byte string here, so just memcpy to that instead.
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
In the pursuit of lowering driver overhead, it became clear that some
amount of redesign of how libdrm_freedreno constructs the submit ioctl
would be needed. In particular, as the gallium driver is starting to
make heavier use of CP_SET_DRAW_STATE state groups/objects, the over-
head of tracking cmd buffers and relocs becomes too much. And for
"streaming" state, which isn't ever reused (like uniform uploads) the
overhead of allocating/freeing ringbuffer[1] objects is too high.
This redesign makes two main changes:
1) Introduces a fd_submit object for tracking bos and cmds table
for the submit ioctl, making ringbuffer objects more light-
weight. This was previously done in the ringbuffer. But we
have many ringbuffer instances involved in a submit (gmem +
draw + potentially 1000's of state-group rbs), and only need
a single bos and cmds table. (Reloc table is still per-rb)
The submit is also a convenient place for a slab allocator for
ringbuffer objects. Other options would have required locking
because, while we can guarantee allocations will only happen on
a single thread, free's could happen either on the application
thread or the flush_queue thread. With the slab allocator in
the submit object, any frees that happen on the flush_queue
thread happen after we know that the application thread is done
with the submit.
2) Introduce a new "softpin" msm_ringbuffer_sp implementation that
does not use relocs and only has cmds table entries for IB1 (ie.
the cmdstream buffers that kernel needs to CP_INDIRECT_BUFFER
to from the RB). To do this properly will require some updates
on the kernel side, so whether you get the softpin or legacy
submit/ringbuffer implementation at runtime depends on your
kernel version.
To make all these changes in libdrm would basically require adding a
libdrm_freedreno2, so this is a good point to just pull the libdrm code
into mesa. Plus it allows for using mesa's hashtable, slab allocator,
etc. And it lets us have asserts enabled for debug mesa buids but
omitted for release builds. And it makes life easier if further API
changes become necessary.
At this point I haven't tried to pull in the kgsl backend. Although
I left the level of vfunc indirection which would make it possible
to have other backends. (And this was convenient to keep to allow
for the "softpin" ringbuffer to coexist.)
NOTE: if bisecting a build error takes you here, try a clean build.
There are a bunch of ways things can go wrong if you still have
libdrm_freedreno cflags.
[1] "ringbuffer" is probably a bad name, the only level of cmdstream
buffer that is actually a ring is RB managed by kernel. User-
space cmdstream is all IB1/IB2 and state-groups.
Reviewed-by: Kristian H. Kristensen <hoegsberg@chromium.org>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This reverts commit 0fa9e6d7b3. The real
issue appears to have been that HiZ ops don't like having WM thread
dispatch force-enabled. The previous commit fixes that problem so we
can go back to using the ForceThreadDispatchEnable bit even on SKL+.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Usually when a window is resized, the app calls d3d to resize the back
buffer to the window size. In some cases, it is not done,
and it expects the output resizes to the window size, even if
the back buffer size is unchanged.
This patch introduces the behaviour when a presentation buffer
is used.
ID3DPresent_GetWindowInfo is a function available with
D3DPresent v1.0, and thus we don't need to check if the
function is available.
The function had been introduced to implement this very
feature.
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
Windows drivers don't set this flag (which affects ff) to more than 8.
Do the same in case some games check for 8.
v2: Remove any dependence on MaxSimultaneousTextures. For non-ff
the number of textures is 16 when the device is able of vs/ps3.
Add this requirement of 16 textures to the driver requirements.
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
A lot of these states are used only for the context,
and are unused for stateblocks (which just uses the
changed.* fields instead for a lot of them).
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
If NINE_STATE_FF_MATERIAL is set, the stateblock will upload
its recorded materials matrix.
If NINE_STATE_FF_LIGHTING is set, the lighting set is uploaded.
These flags could be set by a NineDevice9_SetTransform call
or by setting some states related to ff, but that shouldn't trigger
these stateblock behaviours.
We don't need to follow the context states dirtied by render states.
NINE_STATE_FF_VSTRANSF is exactly the state controlling stateblock
updates of transformation matrices, NINE_STATE_FF is too broad.
These two changes avoid setting the two mentionned states when we
shouldn't.
Fixes: https://github.com/iXit/Mesa-3D/issues/320
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
The device state changed.* field are never used.
These fields are used only for stateblocks.
Avoid setting them at all for clarity.
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
We avoid allocating space for never unused matrices.
However we must do as if we had captured them.
Thus when a D3DSBT_ALL stateblock apply has fewer matrices
than device state, allocate the default matrices for the stateblock
before applying.
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
D3DSBT_ALL stateblocks capture the transform matrices.
Fixes some d3d test programs not displaying properly.
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
While to the application we have to track
accurately all 256 world matrices (including
in stateblocks), hw vertex processing enables
to set a limit to the number of world matrices
the hardware can access to in the advertised caps,
which is 8 for nine.
Thus don't bother in the stateblock code to send
the updated values for the unreachable matrices.
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
At some point the project was to adapt the
commented version to csmt.
The csmt rework enabled to fix some state aliasing
issues between stateblocks and internal state updates.
The commented version needs a lot of work to work with that.
Just drop it.
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
This reverts commit a5fd54f8bf.
The whole point was to add a way to pass -DVMX86_STATS to the build,
but we can do that with a command line argument when we invoke scons.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Follow the restriction of making sure the clear value is between the min
and max values defined in CC_VIEWPORT. Avoids a simulator warning for
some piglit tests, one of them being:
./bin/depthstencil-render-miplevels 146 d=z32f_s8
Jason found this to fix incorrect clearing on SKL.
Fixes: 09948151ab
("intel/blorp: Add the BDW+ optimized HZ_OP sequence to BLORP")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: Jason Ekstrand <jason@jlekstrand.net>
MESA_GIT_SHA1 resolves to either an empty "" string if not build from git,
or " (git-DEADBEEF)" if it is. No need to wrap it in additional "()".
Fixes: 9d40ec2cf6 "radv: Add support for VK_KHR_driver_properties."
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Use utility function for converting h264 pipe video profile to profile idc,
instead of using array.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig at amd.com>
Use utility function for converting h264 pipe video profile to profile idc,
instead of using array.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig at amd.com>
Adding a function for converting h264 pipe video profile to profile idc
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig at amd.com>
Previously, we would always pull the bit size from the destination which
is wrong for opcodes like nir_ilt where the sources are variable-sized
but the destination is a fixed size. We were getting lucky before
because nir_op_ilt returns a 32-bit value and basically everyone who
uses spec constants uses 32-bit ones.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
We have a helper that does exactly what the bany_inequal was doing. It
emits the same code but is a bit higher level and is designed to operate
on a bvec4.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
They do the same thing in the end but i2b is a bit simpler. Also, let's
clean up the mess of code for SSBO handling with one line of builder.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This isn't a great solution for bit-sizes but we don't have a
particularly convenient way to get a bit size from the system value enum
and this keeps the lowering pass from changing it.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Instead of doing our own constant folding, we just emit instructions and
let constant folding happen. This is substantially simpler and lets us
use the nir_imm_bool helper instead of dealing with the const_value's
ourselves.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This requires that we rework the interface a bit to use nir_builder but
that's a nice little modernization anyway.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
When depth testing is disabled, we shouldn't pay attention to the
specified depthCompareOp, and just treat it as always passing. Before,
if the depth test is disabled, but depthCompareOp is VK_COMPARE_OP_NEVER
(e.g. from the app having zero-initialized the structure), then
sanitize_stencil_face() would have incorrectly changed passOp to
VK_STENCIL_OP_KEEP.
v2: Roll the depthTestEnable check into the ds_aspect check below since
they now both do the same thing.
Fixes: 028e1137e6 "anv/pipeline: Be smarter about depth/stencil state"
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
While disassembling send(c) instruction print message descriptor as
immediate source operand along with message descriptor. This allows
assembler to read immediate source operand and set bits accordingly.
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
While encoding the immediate floating point values in instruction we use
values upto precision 9, but while disassembling, we print precision to
6 places, which round up the value and gives wrong interpretation for
encoded immediate constant.
To avoid misinterpretation of encoded immediate values in instruction
and disassembled output, print hex representation along with floating
point value which can be used by assembler in future.
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
After discussion with Timothy Arceri. disk_cache_get_function_identifier
was using only the first byte of the sha1 build-id. Replace
disk_cache_get_function_identifier with implementation from
radv_get_build_id. Instead of writing a uint32_t it now writes to a
mesa_sha1. All drivers using disk_cache_get_function_identifier are
updated accordingly.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Fixes: 83ea8dd99b ("util: add disk_cache_get_function_identifier()")
Following the commit 2385d7b066 and 8e798e28f7, for resource dependancy
tracking.
Fixes: dEQP-GLES31.functional.image_load_store.early_fragment_tests.no_early_fragment_tests_depth_fbo
with FD_MESA_DEBUG=inorder
Signed-off-by: Rob Clark <robdclark@gmail.com>
To avoid wrong result when identifying the type of register.
Ie. If the reg is an array, it might be identified as address or
predicate register.
Fixes: dEQP-GLES31.functional.ssbo.layout.random.arrays_of_arrays.6
Signed-off-by: Rob Clark <robdclark@gmail.com>
Don't leave vsconst/fsconst group enabled if we switch to shader with no
uniforms.
Fixes: abcdf5627a freedreno/a6xx: move const emit to state group
Signed-off-by: Rob Clark <robdclark@gmail.com>
Converted from x86 VFMADDPS intrinsic to generic LLVM intrinsic, and
removed createInstructionSimplifierPass, which were both removed in LLVM
7.0.0
These changes combine patches we received from the community and our own
internal patches
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Tested-by: Chuck Atkins <chuck.atkins@kitware.com>
Gives a +3.89% to +5.27% FPS improvement with Hitman and +2.73% to +2.82%
FPS improvement with Dirt Rally on my GTX 1060.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Which is also required to put it in the tarball, a requirement for
building with meson from the tarball.
CC: Ian Romanick <ian.d.romanick@intel.com>
CC: Marek Olšák <marek.olsak@amd.com>
Fixes: 263c962cfd
("mesa: expose EXT_vertex_attrib_64bit")
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
snprintf() guarantees that it will not write more chars than allowed,
and that the string will be null-terminated, without the need to fill
the whole thing with zeroes to begin with.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
There are two problems with the fixed patch. First, it fails to create a
dependency on the sourced .c file, so changes to intel_tiled_memcpy.c
won't trigger a rebuild. It also doesn't get included in the dist
tarball.
Fixes: 11b1afdc92
("i965/tiled_memcpy: inline movntdqa loads in tiled_to_linear")
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
extra_files is just a nice way to to tell certain IDEs (and those
reading the file) that this file is also a dependency. Meson will use
the .d file generated by the compiler to figure out what the target
actually depends on.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
GL_EXT_texture_buffer introduced texture buffers, which can be used
in shaders through a new type imageBuffer.
Because how image access is implemented in freedreno, calling
imageSize on an imageBuffer returns the size in bytes instead of texels,
which is incorrect.
This patch adds a division of imageSize result by the bytes-per-pixel
of the image format, when image is buffer-backed.
Fixes all tests under
dEQP-GLES31.functional.image_load_store.buffer.image_size.*
v2: Pre-compute and submit the log2 of the image format's bpp as shader
constant instead of emitting the LOG2 instruction in code. (Rob Clark)
v3: Use ffs (find-first-bit) helper for computing log2 (Ilia Mirkin)
Reviewed-by: Rob Clark <robdclark@gmail.com>
anv_GetPhysicalDeviceSurfaceSupportKHR will already return success for
this, but anv_GetPhysicalDevice{Xcb,Xlib}PresentationSupportKHR do not.
Apps which check for presentation support via the latter (all Feral
Vulkan games at least) will therefore fail.
This allows me to render on an Intel GPU and present to a display
connected to an AMD card (tested HD 530 + Vega 64).
v2: Rebase on current master.
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
nir_lower_io_to_scalar_early() is really part of the link time
optimisations. Moving it here allows the code to be simplified
and also keeps the code easy to follow in the next patch.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
The linking opts shouldn't try removing or compacting XFB varyings
in the consumer. To avoid this we copy the always_active_io flag
from the producer.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
To have uniform behavior while disassembling send(c) instruction use
register type of unsigned doubleword for src1 when message descriptor is
immediate value. Bspec does not specifiy anything for src1 immediate
default type.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
There exists _mesa_components_in_format() which already includes
all cases handled in _mesa_base_format_component_count().
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
The conon_bit_class and canon_var_class variables got switched.
Fixes: 932c650e0b "nir/algebraic: Loosen a restriction on variables"
Reported-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Pointer arithmetic...
v2: s/4/sizeof(uint32_t)/ (Eric)
v3: Give bytes to print_batch() in error_decode (Lionel)
Make clear what values we're dealing with in error_decode (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com> (v2)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Implement jpeg target buffer cmd by programming registers directly,
since there is no firmware for VCN Jpeg decode.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Implement jpeg bitstream buffer cmd by programming registers directly,
since there is no firmware for VCN Jpeg decode.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Move the previous get_mjpeg_slice_heaeder function and eoi from
"radeon/vcn" to "st/va".
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Move the previous get_mjpeg_slice_heaeder function and eoi from
"radeon/vcn" to "st/va".
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Add a new file to handle VCN Jpeg decode specific functions. Use Jpeg
specific cmd sending function in end_frame call.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Use function pointer for sending cmd in end_frame call. By doing this, we can
assign different cmd sending logics for Jpeg decode later.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Add RING_VCN_JPEG for VCN Jpeg decode, and keep RING_VCN_DEC for other codecs.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Move radeon_decoder definition from "radeon_vcn_dec.c" to "radeon_vcn_dec.h",
so that it can be included by other files later.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Rename the (un)map_gtt functions to (un)map_map (map by
returning a map) and add new functions (un)map_tiled_memcpy that
return a shadow buffer populated with the intel_tiled_memcpy
functions.
Tiling/detiling with the cpu will be the only way to handle Yf/Ys
tiling, when support is added for those formats.
v2: Compute extents properly in the x|y-rounded-down case (Chris Wilson)
v3: Add units to parameter names of tile_extents (Nanley Chery)
Use _mesa_align_malloc for the shadow copy (Nanley)
Continue using gtt maps on gen4 (Nanley)
v4: Use streaming_load_memcpy when detiling
v5: (edited by Ken) Move map_tiled_memcpy above map_movntdqa, so it
takes precedence. Add intel_miptree_access_raw, needed after
rebasing on commit b499b85b0f.
v6: refactor to changes done for sse41 separation (Tapani)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v5)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
The reference for MOVNTDQA says:
For WC memory type, the nontemporal hint may be implemented by
loading a temporary internal buffer with the equivalent of an
aligned cache line without filling this data to the cache.
[...] Subsequent MOVNTDQA reads to unread portions of the WC
cache line will receive data from the temporary internal
buffer if data is available.
This hidden cache line sized temporary buffer can improve the
read performance from wc maps.
v2: Add mfence at start of tiled_to_linear for streaming loads (Chris)
v3: add Android build support (Tapani)
v4: squash 'fix i915: Fix streaming loads for intel_tiled_memcpy'
separate sse41 to own static library (Tapani)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Reviewed-by: Matt Turner <mattst88@gmail.com> (v2)
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
There is currently no use of returned memcpy functions outside
intel_tiled_memcpy. Patch changes intel_get_memcpy to return memcpy
type instead of actual function. This makes it easier later to separate
streaming load copy in to own static library.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Fixes errors thrown by GCC's Undefined Behaviour sanitizer (ubsan) every
time this macro is used.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
`platforms` is no longer a comma-separated string, and some of our
option descriptions are way too long already. Just drop the incorrect
bit.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
They're not required to be the same as the access flag on the image
unit. For hardware that does shader image lowering based on the
qualifier (Intel), it may be required for state setup.
v2: (by Kenneth Graunke, incorporating feedback from Marek Olšák)
- Reduce both access and shader_access to uint16_t to avoid making
the pipe_image_view structure larger.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Previously, we would fail if a variable had an assigned but unknown bit
size X and we tried to assign it an actual bit size. However, this is
ok because, at the time we do the search, the variable does have an
actual bit size and it will match X because of the NIR rules.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
We rename some local variables in validate() to be more readable and
plumb the var through to get/set_var_bit_class instead of the var index.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
STATE_BASE_ADDRESS only modifies various bases if the "modify" bit is
set. Otherwise, we want to keep the existing base address.
Iris uses this for updating Surface State Base Address while leaving the
others as-is.
v2: Also update aubinator_viewer_decoder (caught by Lionel)
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This not only makes them safe for more bit sizes but it also fixes a bug
in is_zero_to_one where it would return true for constant NaN.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
On scalar ISAs, nir_lower_io_to_scalar_early enables significant
optimizations. However, on vector ISAs, it is counterproductive and
impedes optimal codegen. This patch only calls
nir_lower_io_to_scalar_early for scalar ISAs. It appears that at present
there are no upstreamed drivers using Gallium, NIR, and a vector ISA, so
for existing code, this should be a no-op. However, this patch is
necessary for the upcoming Panfrost (Midgard) and Lima (Utgard)
compilers, which are vector.
With this patch, Panfrost is able to consume NIR directly, rather than
TGSI with the TGSI->NIR conversion.
For how this affects Lima, see
https://www.mail-archive.com/mesa-dev@lists.freedesktop.org/msg189216.html
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
r600 doesn't have a hard requirement on LLVM, and therefore doesn't have
a hard requirement on libelf. Currently the logic doesn't allow that
however.
Distro-bug: https://bugs.gentoo.org/669058
Fixes: 5060c51b6f
("meson: build r600 driver")
Reviewed-by: Matt Turner <mattst88@gmail.com>
This patch exposes support for the following two extensions:
* VK_GOOGLE_decorate_string
* VK_GOOGLE_hlsl_functionality1
There's nothing for the driver to do; it's all handled in spirv_to_nir.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107971
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This extension adds two new decorations which carry meaning only for
HLSL shaders. They are expected to be handled by higher level layers
and can be ignored by implementations. However, it does save the client
a bit of work if the implementation safely ignores them instead of the
client having to strip them out of the SPIR-V in order for it to be
valid.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The comment was wrong, since the loop above casts to a type with the
correct bitsize already.
Fixes: 7e7ee82698 ("ac: add support for 16bit buffer loads")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
And implement ac_bulid_expand_to_vec4() on top of it.
Fixes: 7e7ee82698 ("ac: add support for 16bit buffer loads")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
`nir_intrinsic_image_deref_size` is not being considered during scan for
driver constants, so image constants are not emitted if a shader
only ever query the size of an image (no load, store, atomic op, etc).
This is unlikely, but possible.
Reviewed-by: Rob Clark <robdclark@gmail.com>
This warning detects non-void functions with a missing return statement,
return statements with a value in void functions, and functions with an
bogus return type that ends up defaulting to int. It's already enabled
by default with -Wall. Generally, these are fairly serious bugs in the
code, which developers would like to notice and fix immediately. This
patch promotes it from a warning to an error, to help developers catch
such mistakes early.
I would not expect this warning to change much based on the compiler
version, so hopefully it won't become a problem for packagers/builders.
See the GCC documentation or 'man gcc' for more details:
https://gcc.gnu.org/onlinedocs/gcc-7.3.0/gcc/Warning-Options.html#index-Wreturn-type
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Instead of having weak references to the anv functions and separate
trampoline functions with their own dispatch table, just make the
trampoline functions weak. This gets rid of a dispatch table and
potentially lets the compiler delete the unused weak function. The
end result is a reduction in the .text section of 5.7K and a reduction
in the .data section of 1.4K.
Before:
text data bss dec hex filename
3190329 282232 8960 3481521 351fb1 _install/lib64/libvulkan_intel.so
After:
text data bss dec hex filename
3184548 280792 8960 3474300 35037c _install/lib64/libvulkan_intel.so
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 86b4bd52dc ("docs: update calendar, add news item and link
release notes for 18.2.3")
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
It's broken, and WGL state tracker is always built with GLES support
noawadays.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
This lets us avoid passing the DRM fd around all over the place and gets
us closer to layer utopia.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
In that case, we have to wait for the fence to synchronize with the
corresponding drawing we triggered in the X server.
Fixes incorrect display with the i965 driver and some applications, e.g.
solvespace.
Bugzilla: https://bugs.freedesktop.org/108097
Fixes: aefac10fec "loader/dri3: Only wait for back buffer fences in
dri3_get_buffer"
Tested-by: Sergii Romantsov <sergii.romantsov@globallogic.com>
We don't need weak references to instance entrypoints because we never
have more than one of each so we don't need the NULL fall-back. This
also helps us avoid forgetting things because we now get link errors for
missing instance entrypoints.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This got missed during 1.1 enabling because it was defined as an
interaction between device groups and WSI and it wasn't obvious it was
in the delta.
The idea behind it is that it's supposed to provide a hint to the
application in a multi-GPU setup to indicate which regions of the screen
are being scanned out by which GPU so a multi-device split-screen
rendering application can render each part of the screen on the GPU that
will be presenting it and avoid extra bus traffic between GPUs. On a
single-GPU setup or one which doesn't support this present mode, we need
to do something. We choose to return the window size (or a max-size
rect) if the compositor, X server, or crtc is associated with the given
physical device and zero rectangles otherwise.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
We already have wsi_device and we know the instance allocator at
wsi_device_init time so there's no need to pass it into the physical
device queries. This also fixes a memory allocation domain bug that can
occur if CreateSwapchain gets called prior to any queries (not likely)
in which case the cached connection gets allocated off the device
instead of the instance.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
The number of immediate constants was fixed and the size check was
only done by means of an assertion. Given this a shader that emits
more immediate constants would result in a memory corruption when
mesa is build in release mode.
Instead of using this fixed limit allocate the space dynamically, let it
grow as needed, and also remove the unused ImmArray.
Fixes: dEQP-GLES31.functional.ssbo.layout.random.arrays_of_arrays.1
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Totals from affected shaders:
SGPRS: 1112 -> 1112 (0.00 %)
VGPRS: 1492 -> 1196 (-19.84 %)
Spilled SGPRs: 0 -> 0 (0.00 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Private memory VGPRs: 0 -> 0 (0.00 %)
Scratch size: 0 -> 0 (0.00 %) dwords per thread
Code Size: 112172 -> 101316 (-9.68 %) bytes
LDS: 0 -> 0 (0.00 %) blocks
Max Waves: 93 -> 98 (5.38 %)
Wait states: 0 -> 0 (0.00 %)
All affected shaders are from "Batman: Arkham City" over DXVK.
The pass detects that the temporary array created by DXVK for
storing TCS inputs is a copy of the input arrays and allows
us to avoid copying all of the input data and then indirecting
on it with if-ladders, instead we just do indirect indexing.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Offers three clocks, device, clock monotonic and clock monotonic
raw. Could use some kernel support to reduce the deviation between
clock values.
v2:
Ensure deviation is at least as big as the GPU time interval.
v3:
Set device->lost when returning DEVICE_LOST.
Use MAX2 and DIV_ROUND_UP instead of open coding these.
Delete spurious TIMESTAMP in radv version.
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Suggested-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
v4:
Add anv_gem_reg_read to anv_gem_stubs.c
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
v5:
Adjust maxDeviation computation to max(sampled_clock_period) +
sample_interval.
Suggested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Some of the .dir-locals.el had the wrong name for the truthy value so
it wasn’t setting indent-tabs-mode.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Now that a single cmdstream is used for both binning and draw passes, we
can skip allocation of cmdstream buffer for binning.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Now that state which is different for draw vs binning pass is split out
into different state-groups with appropriate enable_mask (so the
appropriate one is chosen for draw vs binning), switch over to using a
single cmdstream for both passes.
This should significantly lower draw overhead for CPU bound benchmarks.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Blob seems to manage to use same input registers for BS (binning pass)
vs VS (draw pass) shaders, so it can use the same VBO state for both.
We can't quite do that yet, so split them.
Signed-off-by: Rob Clark <robdclark@gmail.com>
We don't need to keep this IGNORE_VISIBILITY in binning pass. Prep work
for using single cmdstream for both draw and binning passes.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Move this to after ir3_cp (which can add lowered immediates to the const
state) for a6xx+, to ensure the uniform state matches between binning
and vertex shaders. This way we can emit just a single VS_CONST state-
group when we re-use single cmdstream for both binning and draw passes.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Use the in-memory cache to construct shader program state and re-use it
on subsequent draws, to lower driver overhead.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Cache that maps gallium hwcso (in this case, 'struct ir3_shader') plus
shader variant key to a generation specific state object.
This could eventually replace the linked list of shader variants, but
for now it lets us re-use the work currently done in fdN_program_emit()
Signed-off-by: Rob Clark <robdclark@gmail.com>
Prep work for a following patch, that introduces a cache to map from
program state (all shader stages) plus variant key to pre-baked hw
state (which could be emit'd via CP_SET_DRAW_STATE, for example).
To do that, we really want the variant key to be immutable, and to
treat the binning pass shader as an extra shader stage, rather than
as a VS variant.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Unfortunately gallium doesn't match what the hw wants perfectly here, in
using a separate CSO for each texture/sampler. So we have to use a hash
table to map the collection of texture/samplers to hw state object.
We probably could use separate hw state objects for texture and sampler
state, but mesa/st tends to update the tex and samp state together.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Intended to be something more compact than a 64b pointer, which could be
used as a key into hashtables. Prep work for texture state objects.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Eventually we want to move nearly everything, but no other state depends
on const state, so this is the easiest one to move first.
For webgl aquarium, this reduces GPU load by about 10%, since for each
fish it does a uniform upload plus draw.. fish frequently are visible in
only a single tile, so this skips the uniform uploads for other tiles.
The additional step of avoiding WFI's when using CP_SET_DRAW_STATE seems
to be work an additional 10% gain for aquarium.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add helper to add state-groups to emit, and code to emit CP_DRAW_STATE
packet if we have any state-groups.
Signed-off-by: Rob Clark <robdclark@gmail.com>
These are not necessary because the corresponding settings are set via
the .dir-locals.el file anyway. Most of them were missing a ‘:’ after
“tab-width” which was making Emacs display an annoying warning
whenever you open the file.
This patch was made with:
sed -ri '/-\*- mode:/,/^$/d' \
$(find src/gallium/{drivers,winsys} -name \*.\[ch\] \
-exec grep -l -- '-\*- mode:' {} \+)
Signed-off-by: Rob Clark <robdclark@gmail.com>
Needs to allocate batches from the cache so that it could
get a valid index and make resource dependancy tracking right.
In addition this fixes assertion on debug build since the commit
1a40faa8 landed.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Needs to specify nondraw when creating a batch through
fd_bc_alloc_batch since it'd better create a batch through
it rather than fd_batch_create.
Signed-off-by: Rob Clark <robdclark@gmail.com>
TODO not sure if this is best solution, but current logic is broken for
texcoord inputs. It is definitely the simplest solution.
Fixes: 1a24f51966 freedreno/ir3: ignore unused inputs
Signed-off-by: Rob Clark <robdclark@gmail.com>
We should get fewer context rolls with the SET_CONTEXT_REG optimization,
but it would have been for nothing if the scissor state rolled the context
anyway. Don't emit the scissor state if there is no context roll.
We know the divisors when we upload them, so instead we can precompute
and upload division factors derived from each divisor.
This fast division consists of add, mul_hi, and two shifts,
and we have to load 4 dwords intead of 1.
This probably won't affect any apps.
This will be more useful when we change the quant mode to increase subpixel
precision and decrease the viewport range (which might not be possible
if the viewport is not centered in the viewport range).
Even though the Intel GPU are always at the same PCI location, all the
info we need is already provided by libdrm. Let's be future proof.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
LLVMInt*Type() return types from the global context and therefore are
not safe for use in other contexts. Use types from our own context
instead.
Fixes frequent crashes seen when doing multithreaded pipeline creation.
Fixes: 4d0b02bb5a "ac: add support for 16bit load_push_constant"
Fixes: 7e7ee82698 "ac: add support for 16bit buffer loads"
Cc: "18.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Adding compile time check for subroutine functions with
the same names. Similar check for intrastage linking was already
landed in commit 5f0567a4f6.
From Section 6.1.2 (Subroutines) of the GLSL 4.00 specification
"A program will fail to compile or link if any shader
or stage contains two or more functions with the same
name if the name is associated with a subroutine type."
Fixes:
* no-overloads.vert
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108109
Signed-off-by: Vadym Shovkoplias <vadym.shovkoplias@globallogic.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
See commit c0c46ca461f136a0ae1ed69da6c874e850aeeb53 in the Linux kernel,
where José Roberto de Souza added this new PCI ID there.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Extend the pass to propagate the copies information along the control
flow graph. It performs two walks, first it collects the vars
that were written inside each node. Then it walks applying the copy
propagation using a list of copies previously available. At each node
the list is invalidated according to results from the first walk.
This approach is simpler than a full data-flow analysis, but covers
various cases. If derefs are used for operating on more memory
resources (e.g. SSBOs), the difference from a regular pass is expected
to be more visible -- as the SSA copy propagation pass won't apply to
those.
A full data-flow analysis would handle more scenarios: conditional
breaks in the control flow and merge equivalent effects from multiple
branches (e.g. using a phi node to merge the source for writes to the
same deref). However, as previous commentary in the code stated, its
complexity 'rapidly get out of hand'. The current patch is a good
intermediate step towards more complex analysis.
The 'copies' linked list was modified to use util_dynarray to make it
more convenient to clone it (to handle ifs/loops).
Annotated shader-db results for Skylake:
total instructions in shared programs: 15105796 -> 15105451 (<.01%)
instructions in affected programs: 152293 -> 151948 (-0.23%)
helped: 96
HURT: 17
All the HURTs and many HELPs are one instruction. Looking
at pass by pass outputs, the copy prop kicks in removing a
bunch of loads correctly, which ends up altering what other
other optimizations kick. In those cases the copies would be
propagated after lowering to SSA.
In few HELPs we are actually helping doing more than was
possible previously, e.g. consolidating load_uniforms from
different blocks. Most of those are from
shaders/dolphin/ubershaders/.
total cycles in shared programs: 566048861 -> 565954876 (-0.02%)
cycles in affected programs: 151461830 -> 151367845 (-0.06%)
helped: 2933
HURT: 2950
A lot of noise on both sides.
total loops in shared programs: 4603 -> 4603 (0.00%)
loops in affected programs: 0 -> 0
helped: 0
HURT: 0
total spills in shared programs: 11085 -> 11073 (-0.11%)
spills in affected programs: 23 -> 11 (-52.17%)
helped: 1
HURT: 0
The shaders/dolphin/ubershaders/12.shader_test was able to
pull a couple of loads from inside if statements and reuse
them.
total fills in shared programs: 23143 -> 23089 (-0.23%)
fills in affected programs: 2718 -> 2664 (-1.99%)
helped: 27
HURT: 0
All from shaders/dolphin/ubershaders/.
LOST: 0
GAINED: 0
The other generations follow the same overall shape. The spills and
fills HURTs are all from the same game.
shader-db results for Broadwell.
total instructions in shared programs: 15402037 -> 15401841 (<.01%)
instructions in affected programs: 144386 -> 144190 (-0.14%)
helped: 86
HURT: 9
total cycles in shared programs: 600912755 -> 600902486 (<.01%)
cycles in affected programs: 185662820 -> 185652551 (<.01%)
helped: 2598
HURT: 3053
total loops in shared programs: 4579 -> 4579 (0.00%)
loops in affected programs: 0 -> 0
helped: 0
HURT: 0
total spills in shared programs: 80929 -> 80924 (<.01%)
spills in affected programs: 720 -> 715 (-0.69%)
helped: 1
HURT: 5
total fills in shared programs: 93057 -> 93013 (-0.05%)
fills in affected programs: 3398 -> 3354 (-1.29%)
helped: 27
HURT: 5
LOST: 0
GAINED: 2
shader-db results for Haswell:
total instructions in shared programs: 9231975 -> 9230357 (-0.02%)
instructions in affected programs: 44992 -> 43374 (-3.60%)
helped: 27
HURT: 69
total cycles in shared programs: 87760587 -> 87727502 (-0.04%)
cycles in affected programs: 7720673 -> 7687588 (-0.43%)
helped: 1609
HURT: 1416
total loops in shared programs: 1830 -> 1830 (0.00%)
loops in affected programs: 0 -> 0
helped: 0
HURT: 0
total spills in shared programs: 1988 -> 1692 (-14.89%)
spills in affected programs: 296 -> 0
helped: 1
HURT: 0
total fills in shared programs: 2103 -> 1668 (-20.68%)
fills in affected programs: 438 -> 3 (-99.32%)
helped: 4
HURT: 0
LOST: 0
GAINED: 1
v2: Remove the DISABLE prefix from tests we now pass.
v3: Add comments about missing write_mask handling. (Caio)
Add unreachable when switching on cf_node type. (Jason)
Properly merge the component information in written map
instead of replacing. (Jason)
Explain how removal from written arrays works. (Jason)
Use mode directly from deref instead of getting the var. (Jason)
v4: Register the local written mode for calls. (Jason)
Prefer cf_node instead of node. (Jason)
Clarify that remove inside iteration only works in backward
iterations. (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Calls are not used yet (functions are inlined), but since new code is
already taking them into account, do it here too. The convention here
and in other places is that no writable memory is assumed to remain
unchanged, as well as global variables.
Also, explicitly state the modes affected (instead of using the
reverse logic) in one of the apply_for_barrier_modes calls.
Suggested by Jason.
v2: Consider local vars used by a call to be conservative, SPIR-V has
such cases. (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Also tests for removal of redundant loads, that we currently handle as
part of the copy propagation.
Note some tests involve multiple blocks and are currently DISABLED
because they (expectedly) fail.
v2: Add missing DISABLED prefix to "multi block" tests. (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Instead of doing this as part of the existing copy_prop_vars pass.
Separation makes easier to expand the scope of both passes to be more
than per-block. For copy propagation, the information about valid
copies comes from previous instructions; while the dead write removal
depends on information from later instructions ("have any instruction
used this deref before overwrite it?").
Also change the tests to use this pass (instead of copy prop vars).
Note that the disabled tests continue to fail, since the standalone
pass is still per-block.
v2: Remove entries from dynarray instead of marking items as
deleted. Use foreach_reverse. (Caio)
(all from Jason)
Do not cache nir_deref_path. Not worthy for this patch.
Clear unused writes when hitting a call instruction.
Clean up enumeration of modes for barriers.
Move metadata calls to the inner function.
v3: For copies, use the vector length to calculate the mask.
(all from Jason)
Use nir_component_mask_t when applicable.
Rename functions for clarity.
Consider local vars used by a call to be conservative (SPIR-V has
such cases).
Comment and assert the assumption that stores and copies are
always to a deref that ends with a vector or scalar.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Note at the moment the pass called is nir_opt_copy_prop_vars, because
dead write elimination is implemented there.
Also added tests that involve identifying dead writes in multiple
blocks (e.g. the overwrite happens in another block). Those currently
fail as expected, so are marked to be skipped.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Add basic helpers for doing tests on the vars related optimization
passes. The main goal is to lower the barrier to create tests during
development and debugging of the passes. Full coverage is not a
requirement.
v2: Make find_next_intrinsic() skip blocks before 'after'. (Jason)
Move nir_imm_ivec2() to nir_builder.h. (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Useful to walk the array removing elements by swapping them with the
last element.
v2: Change iteration to make sure we never underflow. (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
For gallium drivers where you want to do some linking at variant compile
time, you don't have the other producer/consumer shader on hand to modify.
By exposing the inner function, the driver can have the used varyings in
the compiled shader cache key and still do linking.
This is also useful for V3D, where the binning shader wants to only output
position and TF varyings. We've been removing those after nir_lower_io,
but this will be less driver-specific code and let more of the shader get
DCEed early in NIR.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This means that TTN shaders more closely resemble GTN shaders: they have
inputs and outputs as variable derefs, with the variables having their
.driver_location already set up for you.
This will be useful for v3d to do input variable DCE in NIR, which we
can't do when the TTN shaders never have a pre-nir_lower_io stage.
Acked-by: Rob Clark <robdclark@gmail.com>
In TGSI we have a vec4 of which only .z is used, but for NIR we should be
using a float the same as other NIR IR. We were already moving TGSI's .z
to the .x channel.
Acked-by: Rob Clark <robdclark@gmail.com>
This fixes some new CTS that reads clip/cull distances
from the fragment shader stage:
dEQP-VK.clipping.user_defined.clip_*
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
It's the minimum value required by the spec.
This fixes dEQP-VK.api.info.device.properties.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
There's no reason why we need generate trampoline functions for instance
functions or carry N copies of the instance dispatch table around for
every hardware generation. Splitting the tables and being more
conservative shaves about 34K off .text and about 4K off .data when
built with clang.
Before splitting dispatch tables:
text data bss dec hex filename
3224305 286216 8960 3519481 35b3f9 _install/lib64/libvulkan_intel.so
After splitting dispatch tables:
text data bss dec hex filename
3190325 282232 8960 3481517 351fad _install/lib64/libvulkan_intel.so
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
My recent prog_to_nir patch started making new sampler uniforms, which
apparently increased the number of parameters. We used to poke at the
one parameter directly, making it important that there was only one,
but we haven't done that in a while. It should be safe to just delete
the assertion.
Fixes: 1c0f92d8a8 "nir: Create sampler variables in prog_to_nir."
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
u_transfer_helper already had code to handle treating packed Z32_S8
as separate Z32_FLOAT and S8_UINT resources, since some drivers can't
handle that interleaved format natively.
Other hardware needs depth and stencil as separate resources for all
formats. For example, V3D3 needs this for 24-bit depth as well.
This patch adds a new flag to lower all depth/stencils formats, and
implements support for Z24_UNORM_S8_UINT. (S8_UINT_Z24_UNORM is left
as an exercise to the reader, preferably someone who has access to a
machine that uses that format.)
Reviewed-by: Eric Anholt <eric@anholt.net>
This new function takes separate Z24 depth and S8 stencil sources,
and packs them into a single combined Z24S8 buffer.
Reviewed-by: Eric Anholt <eric@anholt.net>
This will be used by u_transfer_helper.c shortly, in order to split
packed depth-stencil into separate resources.
Reviewed-by: Eric Anholt <eric@anholt.net>
This is needed for nir_gather_info to actually count the textures,
since it operates solely on variables.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This is needed for nir_gather_info to actually count the new textures,
since it operates solely on variables.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
sb/sb_bc_parser.cpp:620:27: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand]
if (cf->bc.op_ptr->flags && FF_GDS)
^ ~~~~~~
sb/sb_bc_parser.cpp:620:27: note: use '&' for a bitwise operation
if (cf->bc.op_ptr->flags && FF_GDS)
^~
&
sb/sb_bc_parser.cpp:620:27: note: remove constant to silence this warning
if (cf->bc.op_ptr->flags && FF_GDS)
~^~~~~~~~~
Fixes: da977ad907 ("r600/sb: start adding GDS support")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
ISL_AUX_USAGE_NONE happens to be the same as "false", but let's do the
right thing and use the enum.
v2: fix intel_miptree_finish_depth too (Caio)
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
SCons MSVC support relies on vcvarsall.bat to extract the PATH, CPP
includes, library paths, etc.
And SCons also has an build env var named MSVC_USE_SCRIPT which one can
use to point to alternative vcvarsall.bat script.
This change exposes this MSVC_USE_SCRIPT build env variable as a SCons
command line variable. This will enable using MSVC outside Program
Files (e.g, network shares, etc.)
This change also links advapi32 library, necessary for the Windows
Registry API used by WGL state tracker, avoiding missing symbols.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
v2: - change how the access qualifiers are accumulated
v3: - duplicate members in struct_member_decoration_cb()
- handle access qualifiers on variables
- remove access qualifiers handling in _vtn_variable_load_store()
- fix setting access qualifiers on type->array_element
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net
This is basically a port of commit,
3ade766684
("i965: Disable 3DSTATE_WM_HZ_OP fields.")
The BDW+ docs describe how to use the 3DSTATE_WM_HZ_OP instruction in
the section titled, "Optimized Depth Buffer Clear and/or Stencil Buffer
Clear." It mentions that the packet overrides GPU state for the clear
operation and needs to be reset to 0s to clear the overrides. Depending
on the kernel, we may not get a context with the GPU state for this
packet zeroed. Do it ourselves just in case.
Prevents a number of GPU hangs when running crucible on ICL. I tried to
get the exact number of hangs that occurs without this patch, but was
unsuccessful. The test machine became unresponsive before completing the
full run.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The b2f and b2i conversions always produce zero or one which are both
representable in every type and size. Since b2i and b2f support all bit
sizes, we can just get rid of the conversion opcode.
total instructions in shared programs: 15089335 -> 15084368 (-0.03%)
instructions in affected programs: 212564 -> 207597 (-2.34%)
helped: 896
HURT: 0
total cycles in shared programs: 369831123 -> 369826267 (<.01%)
cycles in affected programs: 2008647 -> 2003791 (-0.24%)
helped: 693
HURT: 216
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This is valid NIR but you can't actually hit this case today. GLSL IR
doesn't have a bool to double opcode; it does f2d(b2f(x)). In SPIR-V we
don't have any to/from bool conversion opcodes at all. However, the
next commit will make us start generating it so we should be ready.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Several of the Atom GPUs have additional restrictions on alignment when
moving < 64-bit source to a 64-bit destination. All of the nir_op_*2*64
code generation paths respected this, but nir_op_b2[fi] did not.
Previous to commit a68dd47b91 it was not possible to generate such an
instruction from the GLSL path. It may have been possible from SPIR-V,
but it's not clear. The aforementioned patch converts a 64-bit
nir_op_fsign into a sequence of operations including a nir_op_b2f with a
64-bit result. This "just works" everywhere except these Atom parts.
This problem was not detected during normal CI testing because the Atom
parts are not included in developer builds.
v2 (idr): Make the patch compile, and make some cosmetic changes. Add a
commit message.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108319
Fixes: a68dd47b91 "nir/algebraic: Simplify fsat of fsign"
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Fixed pack_uint_Z_FLOAT32 by casting row data to float instead uint.
Remove code duplicate function pack_uint_Z_FLOAT32_X24S8.
Edited case in "_mesa_get_pack_uint_z_func".
Now it looks like "_mesa_get_pack_float_z_func".
Remove _mesa_problem call, which was added for debuging this issue.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91433
Signed-off-by: Illia Iorin <illia.iorin@globallogic.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Whiskey Lake uses the same gen graphics as Coffe Lake, including some
ids that were previously marked as reserved on Coffe Lake, but that
now are moved to WHL page.
This follows the ids and approach used on kernel's commit
b9be78531d27 ("drm/i915/whl: Introducing Whiskey Lake platform")
and commit c1c8f6fa731b ("drm/i915: Redefine some Whiskey Lake SKUs")
v2: Lionel noticed that GT{1,2,3} on kernel wasn't following
spec when looking to number of EUs, so kernel has been updated.
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Anuj Phogat <anuj.phogat@gmail.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
vlVaGetImage should respect the width, height, and coordinates x and y that
passed in. Therefore, pipe_box should be created with the passed in values
instead of surface width/height.
v2: add input size check, return error when size out of bounds
v3: fix the size check for vaimage
v4: add size adjustment for x and y coordinates
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Cc: "18.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Acked-by: Christian König <christian.koenig@amd.com>
R32G32B32 are weird formats and we are only going to support
some basic operations for now.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Not going to matter, but be consistent.
Found by coverity
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Fixes: caf41c78c (anv/allocator: Support softpin in the BO cache)
This fixes a bug uncovered by my NIR integer division by constant
optimization series.
Fixes: 19f9cb72c8 "i965/fs: Add pass to propagate conditional..."
Fixes: 627f94b72e "i965/vec4: adding vec4_cmod_propagation..."
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
While I generally trust rediculousfish to have done his homework, we've
made some adjustments to suit the needs of mesa and it'd be good to
test those. Also, there's no better place than unit tests to clearly
document the different edge cases of the different methods.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
There's nothing inherently fixed-width in the code. All that's required
to generalize it is to make everything internally 64-bit and pass
UINT_BITS in as a parameter to util_compute_fast_[us]div_info. With
that, it can now handle 8, 16, 32, and 64-bit integer division by a
constant.
We also add support for division by 1 and by other powers of 2. This is
useful if you want to divide by a uniform value in a shader where you
have the opportunity to adjust the uniform on the CPU before passing it
in.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Compilers can use this to generate optimal code for integer division
by a constant.
Additionally, an unsigned division by a uniform that is constant but not
known at compile time can still be optimized by passing 2-4 division
factors to the shader as uniforms and executing one of the fast_udiv*
variants. The signed division algorithm doesn't have this capability.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Currently mesa only supports EGL on Unix like systems, cygwin, and
haiku. Meson should actually enforce this. This fixes the default build
on MacOS.
v2: - invert the condition, mark darwin and windows as not supported
instead of trying to mark what is supported.
v3: - add missing )
v3: - Update comment to reflect condition change in v2
CC: 18.2 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
The Nvidia/AMD binary drivers allow this, as does GCC.
This fixes shader compilation issues in the latest update of
No Mans Sky.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
These allows us to not support fsign.sat in the Intel compiler backend,
and that will simplify some later changes.
No shader-db changes on any Intel platform.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Thomas Helland <thomashelland90@gmail.com>
svga_destroy_shader_variant() itself flushes and retries the command
if there's a failure. So no need for the callers to do it. Other
callers of the function were already ignoring the return value.
This also fixes a corner-case double-free reported by Coverity
(and reported by Dave Airlie).
Tested with various OpenGL apps.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Otherwise building just vulkan (among other things) will build these
tests, pull in a bunch of stuff they shouldn't, and potentially fail to
compile.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
For some reason the 2d engine can't handle this. Red formats get special
treatment there, so perhaps related.
Fixes dEQP-GLES3 tests of the form:
dEQP-GLES3.functional.fbo.blit.conversion.r{8,16f,32f}_to_srgb8_alpha8
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Cc: mesa-stable@lists.freedesktop.org
The current state tracker can generate these sometimes. Fixing this is
more involved, and due to some integer math we can generate
divisions-by-zero.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Cc: mesa-stable@lists.freedesktop.org
As with a5xx, hidden behind FD_MESA_DEBUG=lrz due to being paranoid
about z-fighting issues with some games (in particular, this was
observed with 0ad on a5xx.. but I think the proper solution to enable
this by default is to figure out how to do driver specific driconf
options).
Signed-off-by: Rob Clark <robdclark@gmail.com>
My attempt was to set this field instead of duplicating one.
Fixes: 6cfa321c39 ("radv: add potential missing fields for DB_EQAA")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
In the same fashion as is done for glEGLImageTextureTarget2D.
v2: share the fallback which sets baseformat and internalformat correctly
which makes both of the tests pass (Tapani)
Fixes android.hardware.nativehardware.cts.AHardwareBufferNativeTests:
#SingleLayer_ColorTest_GpuColorOutputCpuRead_R8G8B8X8_UNORM
#SingleLayer_ColorTest_GpuColorOutputIsRenderable_R8G8B8X8_UNORM
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
For testing it is of interest that all tests of dEQP pass, e.g. to test
virglrenderer on a host only providing software rendering like in a CI.
Hence make it possible to disable certain optimizations that make tests fail.
While we are there also add some documentation to the flags to make it clear
that this is opt-out.
Setting the environment variable "GALLIVM_PERF=no_filter_hacks" can be used to make
the following tests pass in release mode:
dEQP-GLES2.functional.texture.mipmap.2d.affine.*_linear_*
dEQP-GLES2.functional.texture.mipmap.cube.generate.*
dEQP-GLES2.functional.texture.vertex.2d.filtering.*_mipmap_linear_*
dEQP-GLES2.functional.texture.vertex.2d.wrap.*
Related:
https://bugs.freedesktop.org/show_bug.cgi?id=94957
v2: rename optimization disabling flag to 'safemath' and also move the
nopt flag to the perf flags.
v3: rename flag "safemath" to "no_filter_hacks" since safemath is usually
associated with floating point operations (Roland)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Pass the size of a resource when creating it so a backing can be kept in
the other side.
Also pass the required offset to transfer commands.
This moves vtest closer to how virtio-gpu works, making it more useful
for testing.
v2: - Use new messages for creation and transfers, as changing the
behavior of the existing messages would be messy given that we don't
want to break compatibility with older servers.
v3: - Use correct strides: The resource corresponding to the output display
might have a differnt line stride then the IOVs, so when reading back
to this resource take the resource stride and the the IOV stride
into account.
v4: Fix transfer size calculation (Andrey Simiklit)
v5: Add comment about transfer size value in the PUT commend (Gurchetan).
Add a comment about the size correction for transfers for reading and
writing the resource. Fixing this by correctly evaluating the size
upfront will need some work also on the virglrenderer side.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> (v2)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
The transfer size used in virglrenderer refers to uint32_t, so one
must add 3 and then divide by 4 instead of adding 3/4 which is a no-op
with integers.
Fixes: b3b82fe8ea virgl/vtest: add vtest driver
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
reg_saved will have 64 bits, and (1 << reg) where reg > 31 has undefined
behavior. (1ull << reg) would be correct for 64 bits.
This commit shifts the other way in order to merge the conditions.
Otherwise, they are removed during NIR linking or in some
lowering passes.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The ssa_for_alu_src helper will correctly handle swizzles and other
source modifiers for you. The expansions for unpack_half_2x16,
pack_uvec2_to_uint, and pack_uvec4_to_uint were all broken with regards
to swizzles. The brokenness of unpack_half_2x16 was causing rendering
errors in Rise of the Tomb Raider on Intel ever since c11833ab24
which added an extra copy propagation to the optimization pipeline and
caused us to start seeing swizzles where we hadn't seen any before.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107926
Fixes: 9ce901058f "nir: Add lowering of nir_op_unpack_half_2x16."
Fixes: 9b8786eba9 "nir: Add lowering support for packing opcodes."
Tested-by: Alex Smith <asmith@feralinteractive.com>
Tested-by: Józef Kucia <joseph.kucia@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
>From Section 6.1.2 (Subroutines) of the GLSL 4.00 specification
"A program will fail to compile or link if any shader
or stage contains two or more functions with the same
name if the name is associated with a subroutine type."
v2:
- error out earlier (Tapani)
- style fixes (Iago)
Fixes:
* no-overloads.vert
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108109
Signed-off-by: Vadym Shovkoplias <vadym.shovkoplias@globallogic.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Check if server supports version negotation by sending a PING_PROTOCOL_VERSION
message right before a dummy RESOURCE_BUSY_WAIT. If we don't get a reply
for the first, we know the server doesn't support it.
If it does support it, we can query the max protocol version supported
by the server and fall back if needed.
v2: - Send a new message to negotiate the protocol version, checking if
the server supports this message by immediately sending a busy wait
message. (Dave Airlie)
v3: - Send a zero-arg command PING_PROTOCOL_VERSION so we actually keep
compatibility with older servers. (Code by Dave Airlie)
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
construct correct gen xml filename when we try to load hardware xml
description from a given path
v2: remove temporary variable (Francesco Ansanelli)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Previously, we just went ahead and emitted MI_BATCH_BUFFER_START as
normal. If we are near enough to the end, this can cause us to start a
new BO just for the MI_BATCH_BUFFER_START which messes up chaining. We
always reserve enough space at the end for an MI_BATCH_BUFFER_START so
we can just increment cmd_buffer->batch.end prior to emitting the
command.
Fixes: a0b133286a "anv/batch_chain: Simplify secondary batch return..."
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107926
Tested-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
On Broadwell and above, we have to use different MOCS settings to allow
the kernel to take over and disable caching when needed for external
buffers. On Broadwell, this is especially important because the kernel
can't disable eLLC so we have to do it in userspace. We very badly
don't want to do that on everything so we need separate MOCS for
external and internal BOs.
In order to do this, we add an anv-specific BO flag for "external" and
use that to distinguish between buffers which may be shared with other
processes and/or display and those which are entirely internal. That,
together with an anv_mocs_for_bo helper lets us choose the right MOCS
settings for each BO use.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99507
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This reverts commit 3d81e11b49.
As reported by Federico, some games require the 'sort by year' since
they truncate the extensions which do not fit the fixed size string
array.
Seemingly I did not consider that, as the documentation (both Mesa and
Nvidia) mentions about program crashes ... which are worked around by
setting the env. variable.
This commit reinstates the workaround and enhances the documentation.
Cc: Marek Olšák <maraeo@gmail.com>
Cc: Ian Romanick <idr@freedesktop.org>
Reported-by: Federico Dossena <info@fdossena.com>
Fixes: 3d81e11b49 ("mesa: remove unnecessary 'sort by year' for the GL
extensions")
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Tested-by: Federico Dossena <info@fdossena.com>
Split into different sections, document each one as well as strange
cases like GL_ATI_texture_compression_3dc.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Remove all the desktop GL and GLX entries from the list.
Former are pulled by the gl.h and glext.h includes at the top while the
latter are no longer needed.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Earlier commit updated the code to use the DRI tokens, yet forgot to
update the comment.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Earlier commit updated the code to use the DRI tokens, yet forgot to
update the comment.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Will allow us to remove even bigger hack elsewhere. But more
importantly, we should not be using _any_ GLX tokens in DRI.
Document the gory details about the current side-effects.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Somewhat recently Thomas Hellstrom added the respective DRI tokens
and updated the drivers. Update the documentation to match reality.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
The pipe_loader_release API closes the fd given, even if the pipe-loader
should _not_ take ownership of it.
With earlier commit we fixed pipe_loader_drm_probe_fd, and now with
cover the final piece.
Note that unlike the DRM case, here the caller _did_ forget to dup
before using it ... most likely leading to all sorts of fun.
Don't forget the close in the error path. Seems like the things are a
bit leaky/asymmetrical with the semi-recent config work. But we can shave
that yak another day ;-)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Currently pipe_loader_drm_probe_fd takes ownership of the fd given.
To match that, pipe_loader_release closes it.
Yet we have many instances which do not want the change of ownership,
and thus duplicate the fd before passing it to the pipe-loader.
Move the dup() within pipe-loader, explicitly document that and document
all the cases through the codebase.
A trivial git grep -2 pipe_loader_release makes things as obvious as it
gets ;-)
Cc: Leo Liu <leo.liu@amd.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Axel Davy <davyaxel0@gmail.com>
Cc: Patrick Rudolph <siro@das-labor.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Axel Davy <davyaxel0@gmail.com> (for nine)
With commit c6c0f94714, back in 2006 Brian removed the
_glapi_check_multithread() call from core mesa - _mesa_make_current.
It was done to remove fairly awkward #ifdef guard which caused subtle
differences in core mesa.
Since that guard is long gone, we can drop the duplication and
reintroduce the call in core.
Note that the function is was missing when using EGL + classic dri HW
drivers. Yet on TLS builds it's a no-op, so we're safe.
Any non TLS users - more or less anything !Linux (or even musl on Linux
up-to semi-recently) may have experienced problems.
v2: don't remove the call from swrast - move it to core (Eric)
Cc: Eric Anholt <eric@anholt.net>
Cc: Brian Paul <brianp@vmware.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Earlier commit added support for 'front_buffers', erroneously adding a
return in vl_dri3_screen_destroy. Effectively leaking a lot of state.
Fixes: 8d7ac0a4e4 ("vl/dri3: implement DRI3 BufferFromPixmap")
Cc: Leo Liu <leo.liu@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
The header was used only by dri2.c, containing a two-member struct and cast wrapper.
Just inline it where it's used/needed.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
This is the minimum value according to the spec.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
This can be used as a drop in replacement for
disk_cache_get_function_timestamp().
Here we use build-id to generate a driver-id rather than build
timestamp if available. This should resolve issues such as
distros using reproducable builds and flatpak not having
real build timestamps.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Only some drivers use a timestamp here. Others use things such
as build-id, or even a combination of build-ids from Mesa and
LLVM.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
In the GL_MESA_framebuffer_flip_y implementation
_mesa_is_winsys_fbo checks were replaced with
FlipY checks. rb->Name is also used to determine
if a buffer is winsys.
v2: Fixes annotation [for emil]
Fixes: ab05dd183c ("i965: implement GL_MESA_framebuffer_flip_y [v3]")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Chad Versace <chadversary@chromium.org>
We already call nir_rematerialize_derefs_in_use_blocks_impl prior to
calling nir_lower_ssa_defs_to_regs_block so the assertion that all deref
uses in the block should hold. This fixes the following CTS test when
SPIR-V optimization recipe 1:
dEQP-VK.glsl.struct.local.loop_nested_struct_array_vertex
Fixes: 606eb56ab9 "intel/nir: Only lower load/store derefs"
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
If the block in which the jump is inserted is the predecessor of a phi
then we need to remove phi sources otherwise the phi may end up with
things improperly connected. This fixes the following CTS test when
dEQP is run with SPIR-V optimization recipe 1:
dEQP-VK.glsl.functions.control_flow.return_in_nested_loop_vertex
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Timestamp can be zero for example when Flatpak is used. In this
case just disable the cache rather then segfaulting when
incompatible cache items are loaded.
V2: actually return false when mtime is 0.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Unnecessary. While we are at it, remove the check for pre-VI
because it's already checked earlier.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
If apps use the MUTABLE bit and the same formats as the image one
in the list, we can still enable TC-compat HTILE. I don't think
this happens often but given the fact that TC-compat HTILE allows
a nice boost in some situations, it's worth checking.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Like we disable DCC/CMASK for small color surfaces as well.
Serious Sam 2017 creates a 1x1 depth surface and I think
it should be faster to do slow clears on the graphics queue
instead of fast clears on compute, and eventually a depth
expand if the surface isn't TC-compatible HTILE.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
I don't think this is required by Vulkan too.
Ported from RadeonSI (AMDVLK doesn't set it either).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
As discussed in the review of the patch which added the comment:
Nothing happens when a thread is created, because pthread_atfork doesn't
affect creating threads. However, spawning a child process will likely
crash.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We already track if the DMA engine is busy/idle with a flag,
and we emit a packet that waits for all CP DMA operations
to be complete. This is done at end of command buffer because
the kernel doesn't wait for them, and also when emitting
barriers, so it should be safe.
This improves small copies for both aligned and unaligned sizes.
Aligned sizes:
BEFORE:
1 KB: 59.840000 ms
2 KB: 71.200000 ms
AFTER:
1 KB: 31.200000 ms
2 KB: 31.040000 ms
Unaligned sizes:
BEFORE:
2 KB: 68.3200 ms
3 KB: 79.3600 ms
5 KB: 76.6400 ms
9 KB: 90.8800 ms
17 KB: 116.0000 ms
AFTER:
2 KB: 31.0400 ms
3 KB: 32.0000 ms
5 KB: 30.8800 ms
9 KB: 30.5600 ms
17 KB: 29.6000 ms
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
According to my benchmark results, it appears that we should
reduce the threshold to 1024.
BEFORE:
1 KB: 68.656000 ms
2 KB: 118.368000 ms
AFTER:
1 KB: 31.760000 ms
2 KB: 29.840000 ms
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
It's unnecessary because we can just check if the timestamp
is to different to the default value when a pool is created
or resetted. Instead of waiting for the availability bit to
be 1, we have to emit a not equal WAIT_REG_MEM for checking
if the timestamp is ready.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Pulling this logic out means we can share the logic and avoid a couple
of temporary variables that helped make things clearer before. Note
that in either vismode case, we always program vismode 0.
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
Now that we've copied the emit logic into each branch of the
if (info->index_size) statement, we can simplify the logic a bit
according to which case we're in.
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
This splits the two code paths into separate functions and moves the
"if (info->indirect)" test into draw_impl().
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
This way the markers clearly bracket the draw call and isn't
duplicated for both direct and indirect draw code.
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
According to the following definition,
int AtomicCompSwap(inout int mem, uint compare, uint data);
the preceding one in atomic_comp_swap of NIR is compare and data is
followed, while src0 for cmpxchg needs vec2(data, compare)
So for ssbo/image deref comp_swap, that should be reversed.
Fixes: dEQP-GLES31.functional.image_load_store.*.atomic.comp_swap*
Possibly these bits mean something else now. Blob always seems to use
FOUR_QUADS, and changing to TWO_QUADS seems to cause different threads
to overlap registers.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Fix a few bits of confusion, as with previous gen's constlen is aligned
to 4, and value in bitfield is left-shifted by 2 (ie. divided by 4).
But this is done by the CONSTLEN() accessor/builder fxn, so don't do it
twice. Also HLSQ_FS_CNTL.CONSTLEN is not special.
Signed-off-by: Rob Clark <robdclark@gmail.com>
batch_flush_reset_dependencies() expects to be called unlocked, and can
call fd_batch_reference() which can try to aquire the screen lock again.
Signed-off-by: Rob Clark <robdclark@gmail.com>
In c3d9f29b we allowed ctx->batch to be null, and started tracking the
current framebuffer state in fd_context. But the existing logic in
fd_blitter_pipe_begin() would, if !ctx->batch, set null fb state to be
restored after blit. Which broke the world of deqp (and probably other
things)
Fixes: c3d9f29b78 freedreno: allocate ctx's batch on demand
Signed-off-by: Rob Clark <robdclark@gmail.com>
This is defined to always clear the entire surface(s) specified,
regardless of scissor state.. mesa/st will turn scissored clears
into a draw. So rip about a bunch of unnecessary machinery.
Also remove a comment that was obsolete since using u_blitter to
turn clear into draw (for the cases where there isn't a hw blitter
fast-path).
Signed-off-by: Rob Clark <robdclark@gmail.com>
The logic to force a flush every draw was short-circuited with newer
kernels. Also it should apply to clears as well.
Signed-off-by: Rob Clark <robdclark@gmail.com>
The effective scissor changes based on rasterizer->scissor flag, so we
need to re-emit scissor state when rasterizer state changes.
Signed-off-by: Rob Clark <robdclark@gmail.com>
In st_renderbuffer_alloc_storage, we avoid allocating storage for
zero-sized buffers, leading to this pointer being NULL. We already
take care to avoid dereferencing these pointers for color-buffers,
but not for depth/stencil-buffers.
So let's thread a bit more carefully here.
This avoids a crash while running Piglit's glx/glx-visuals-stencil
test, both on virgl and r600g.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Guillaume Charifi <guillaume.charifi@sfr.fr>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Use sample rate shading instead, should give better locality.
Makes Nier with 8x msaa on a Raven go 5 fps -> 7 fps in the menu.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
I was about to make the claim to someone that every field in isl_surf
is either an enum or has explicit units. Then I looked at isl_surf and
discovered this claim was wrong. We should fix that. This commit does
a few refactors:
* Add _B suffixes to some struct fields
* Add _B to some variables and parameters
* Rename row_pitch_tiles -> row_pitch_tl
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Previously if only ff vs or only ff ps was used,
the constants for both were marked as updated,
while only the constants of the used ff shader
were updated.
Now that NINE_STATE_FF_VS and
NINE_STATE_FF_PS do not intersect anymore,
we can correctly mark the correct set of constant
as updated.
Fixes: https://github.com/iXit/Mesa-3D/issues/319
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
NINE_STATE_FF_OTHER was mostly ff vs states.
Rename it to NINE_STATE_FF_VS_OTHER and
move common states with ps to
NINE_STATE_FF_PS_CONSTS (renamed from
NINE_STATE_FF_PSSTAGES).
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
Some states only affect the ff shader,
not its constants.
Currently we don't check anything and
always recompute the ff shader key.
However we do check for NINE_STATE_FF_OTHER
and if set we reupload some constants.
Thus for those states which had NINE_STATE_FF_OTHER
set but didn't need it,
replace by a dummy ff shader state (which is
easier to understand for an external reader than
just setting 0 and more future proof).
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
The pointsize states were missing the ff
NINE_STATE_FF_OTHER flag, and thus might
miss state updates when using ff.
Fixes some wine tests.
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
Rename NINE_STATE_FOG_SHADER,
NINE_STATE_POINTSIZE_SHADER and NINE_STATE_PS1X_SHADER
into
NINE_STATE_VS_PARAMS_MISC and NINE_STATE_PS_PARAMS_MISC.
The behaviour is unchanged, except one minor change:
D3DRS_FOGTABLEMODE doesn't need to affect VS.
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
Previously we had already found that for
MANAGED buffers the buffer started dirty
(which meant all writes out of bound
before the first draw call using the
buffer have to be taken into account).
Possibly it is the same for the other types of buffers.
For now always lock the entire buffer (starting from the offset)
for these (except for DYNAMIC buffers, which might hurt
performance too much).
Fixes: https://github.com/iXit/Mesa-3D/issues/301
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
The previous code was ignoring the input
until a cursor is set inside d3d
(with SetCursorProperties), as expected
by wine tests.
However it did still make a call to ID3DPresent_SetCursor,
which would result into a SetCursor(NULL) call, thus
hidding any cursor set outside d3d, which we shouldn't do.
Add comment about not avoiding redundant ID3DPresent_SetCursor
calls once a cursor has been set in d3d, as it has been tested to
cause regressions.
Fixes: https://github.com/iXit/Mesa-3D/issues/197
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
For some applications SetCursorPosition
is called when a cursor event is received.
Our SetCursorPosition was always calling
wine SetCursorPos which would trigger
a cursor event.
The infinite loop is avoided by not calling
SetCursorPos when the position hasn't changed.
Found thanks to wine tests.
Fixes irresponsive GUI for some applications.
Fixes: https://github.com/iXit/Mesa-3D/issues/173
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
CC: <mesa-stable@lists.freedesktop.org>
d3d9_get_pipe_depth_format_bindings assumes the input format
is a depth stencil format.
Previously the user could hit this function with an invalid format.
Protect the last non protected call with a depth_stencil_format check.
Another solution is to have d3d9_get_pipe_depth_format_bindings
support non depth stencil format, but we don't want the user
to create depth buffers with d3d formats that can't be one,
it's better to check if the format can be depth buffer with d3d.
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
colorarg0, etc are 3 bits wide.
Make the code more readable by adding an & 0x7
to further indicate we only remember the first 3 bits only.
The 4th bit is always 0,
and colorarg_b4, colorarg_b5, etc are used to store
the 5th and 6th bits.
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
When using csmt, ff shader creation happens on the csmt
thread. Creating the shaders, then calling RefToBind causes
the device ref to be increased then decreased.
However the device dtor assumes than no work pending on the
csmt thread could increase the device ref, leading to hang.
The issue is avoided by creating the shaders with a bind
count directly.
Fixes: https://github.com/iXit/Mesa-3D/issues/295
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
Emulate perspective interpolation of depth for programmable ps fog
ff ps fog uses position z, or 1/w depending on the ff
projection matrix set. This is according to public documents
found describing the algorithm and tests we made.
In the case of programmable ps, we used position's z,
which was sufficient to pass wine tests (which test shaders
don't set w).
Issue https://github.com/iXit/Mesa-3D/issues/315 showed
that this calculation was wrong.
Using perspective interpolation on z, that is using z * 1/w
seems to satisfy both this application and wine tests.
Fixes: https://github.com/iXit/Mesa-3D/issues/315
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
Tests done on several devices of all 3 vendors and
of different generations showed that there are several
ways of handling infs and NaN for d3d9.
Tests showed Intel on windows does always clamp
RCP, RSQ and LOG (thus preventing inf/nan generation),
for all shader versions (some vendor behaviours vary
with shader versions).
Doing this in nine avoids 0*inf issues for drivers
that can't generate 0*inf=0 (which is controled by
TGSI's MUL_ZERO_WINS).
For now clamp for all drivers. An ulterior optimization
would be to avoid clamping for drivers with MUL_ZERO_WINS
for the specific shader versions where NV or AMD don't
clamp.
LOG and RSQ being already clamped, this patch only
clamps RCP.
Fixes: https://github.com/iXit/Mesa-3D/issues/316
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
CC: <mesa-stable@lists.freedesktop.org>
Since blending will be disabled later for integer formats we have to
consider that in the case of a mixed set of integer/non-integer format
buffers blending must be handled on a per buffer basis.
Fixes on r600:
dEQP-GLES31.functional.draw_buffers_indexed.random.
max_required_draw_buffers.13
Fixes: 8fb966688b
st/mesa: Disable blending for integer formats.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
That warning fires every time a string function takes an argument that
could possibly be longer than its max output, which triggers all over
the place, especially when working with file paths ("what if every file
path is MAX_PATH long?" is what GCC is saying, which is really annoying
when we *know* that "/dev/dri/cardN" is not gonna be 4096 char long and
it's safe to store it in a 32-char array).
Anyway, we either add a ton of dead code all over the place to make GCC
happy, or we get rid of its spam. I chose the latter.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
A ZPASS_DONE packet doesn't make sense for the compute queue. It will
result in a gpu hang.
This change resolves a gpu hang for SteamVR+Vega.
Cc: mesa-stable@lists.freedesktop.org
Fixes: 1f616a840e "radv: emit a dummy ..."
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This allows NIR to CSE more operations. LLVM does this also so the
impact is limited, however doing this in NIR allows other opts to
make progress. For example in radeonsi more loops are unrolled in
Civilization Beyond Earth.
The actual pipeline-db stats are not overwhelming but even in the
negatively affected shaders the NIR is clearly better. It just
happens that the code shuffling and in some cases calls to max
rather than a flt result in the final output from LLVM not
giving as good numbers.
However this is an incremental opt that further passes build off
so the change should be made IMO.
Totals from affected shaders:
SGPRS: 20192 -> 20184 (-0.04 %)
VGPRS: 19516 -> 19524 (0.04 %)
Spilled SGPRs: 437 -> 444 (1.60 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Private memory VGPRs: 0 -> 0 (0.00 %)
Scratch size: 0 -> 0 (0.00 %) dwords per thread
Code Size: 1527444 -> 1522276 (-0.34 %) bytes
LDS: 6 -> 6 (0.00 %) blocks
Max Waves: 1018 -> 1016 (-0.20 %)
Wait states: 0 -> 0 (0.00 %)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
By adding `_llvm == 'true'` to the required argument we can check the
'auto' and 'true' case in one path.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
NVC0_CB_AUX_BINDLESS_INFO isn't written to on Maxwell+ and it's too small
anyway.
With these changes, TXQ is used to determine the number of samples and
the coordinate adjustment information looked up in a small array in the
driver constant buffer.
v2: rework to use TXQ and a small array instead of a larger array with an
entry for each texture
v3: get rid of the small array and calculate the adjustments in the shader
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Fixes: c2ae9b4052 ('nvc0: implement multisampled images on Maxwell+')
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
I also updated the developer instructions; presumably someone who's been
given commit rights already knows how to clone a repository :)
A more useful thing is to show how to update the pushurl, and how to use
access tokens to push over HTTPS (especially for us at Intel, where
non-http traffic is a pain).
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
It's just over 10 months since 17.3.0 was released with s3tc support enabled.
Probably a good idea to update the FAQ page.
v2: Incorporate feedback from Adam Jackson <ajax@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Fixes: 04396a134f ("mesa: Import libtxc_dxtn sources")
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
SDL has some shaders that compute sin(angle) and cos(angle) for a rotation
matrix in the VS, and angle is usually 0.0. Our previous implementation
had quite a bit of error around 0.0, causing single-pixel rotations at
typical window sizes. SDL2 has changed as of August 28th (commit
12156:e5a666405750) to not need sin/cos in the VS, but we should still fix
this for existing implementations or similar patterns that other programs
may have.
glsl-cos goes from 32 instructions to 36, but 9 uniforms to 7.
glsl-sin goes from 32 instructions to 34, but 8 uniforms to 7.
This seems like a fine impact to have for the bugfix.
Cc: 18.1 18.2 <mesa-stable@lists.freedesktop.org>
Fixes: https://github.com/anholt/mesa/issues/110
v2: - fix typo
These are how FreeBSD and Debian handle multiple versions of LLVM
installed at the same time, respectively.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
We already correctly handle va being auto, but we force it to being
true, which is bad.
Fixes 94cf397092
("meson: Fix auto option for va")
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Corrects building glx as gallium-xlib without any dri targets.
v2: - fix ugly formatting
Fixes: 66c94b9313
("meson: build gallium winsys for dri, null, and wrapper")
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
This was added as part of 1.1 but it's very hard to track exactly what
extension added it. In any case, we should implement it.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Dave Airlie <Airlied@redhat.com>
The throughput is similar to 32-bit integers on GFX8 and
AMDVLK does not expose 16-bit integers on pre Vega as well.
On GFX9+, only LLVM 7+ has support.
This fixes a bunch of CTS crashes on GFX9/LLVM 6.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This patch fixes uninitialized fields in DefineDepthStencilView and
DefineStreamOutput commands that are not relevant in SM4 device.
Reviewed-by: Brian Paul <brianp@vmware.com>
The function pointer declarations in dd.h for the BufferData() and
BufferSubData() use the ARB-suffixed datatypes. This patch changes
the buffer_data_fallback() and buffer_sub_data_fallback() functions
to use those datatypes too.
This fixes a build warning when building 32-bit libraries. Evidently,
GLsizeiptrARB and GLsizeiptr are defined differently in that situation.
All all implementations of these driver hooks use the ARB-suffixed
types.
Reviewed-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
With this patch, svga driver will start advertising OpenGL 3.3
compatibility profile.
Tested with some mesa demos, piglit and glretrace.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
We need to convert unnormalized texcoords to normalized texcoords
when we are sampling from texture. We don't need this conversion
if there is no sampler view.
Tested with piglit, glretrace
Fixes vmware bug 2101970
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
In gallium, the layer index of a texture array to be mapped
is specified in the z component, whereas in svga device, the
index is specified in a separate argument.
Currently in svga_texture_transfer_map(), we explicitly modify
the z value in the base transfer map to 0 so the layer offset will not be
applied twice, but this causes problem when state tracker later
refers to the base transfer map and expects the slice index to be
specified in z (commit 463b0ea1f6).
To fix the problem, this patch makes a local copy of the box in
svga_transfer and modifies the z value in this copy instead.
Fixes spec@khr_texture_compression-astc piglit test crashes.
Fixes regression in the dma path with commit 1fdd3dd94a.
Tested with mtt glretrace, piglit on Windows VM and Linux VM.
Reviewed-by: Brian Paul <brianp@vmware.com>
Since commit 75881bed9e "i965: Rework the TCS passthrough shader to
use NIR." the created nir_shader is not dummy, and it is compiled by
the backend like the others.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Currently u_math needs gallium utils for cpu detection. Most of what
u_math uses out of u_cpu_detection is duplicated in src/mesa/x86
(surprise!), so I've just reworked it as much as possible to use the
x86/common_x86_features.h macros instead of the gallium ones. The mesa
implementation is a header only approach, with no external dependencies.
There is one small function that was copied over, as promoting
u_cpu_detection is itself a fairly hefty undertaking, as it depends on
u_debug, and this fixes the bug for now.
bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107870
Tested-by: Vinson Lee <vlee@freedesktop.org>
Unlike the other platforms, here we aim do guess if the device that we
somewhat arbitrarily picked, is supported or not.
In particular: when a vendor is _not_ requested we loop through all
devices, picking the first one which can create a DRI screen.
When a vendor is requested - we use that and do _not_ fall-back to any
other device.
The former seems a bit fiddly, but considering EGL_EXT_explicit_device and
EGL_MESA_query_renderer are MIA, this is the best we can do for the
moment.
With those (proposed) extensions userspace will be able to create a
separate EGL display for each device, query device details and make the
conscious decision which one to use.
v2:
- update droid_open_device_drm_gralloc()
- set the dri2_dpy->fd before using it
- return a EGLBoolean for droid_{probe,open}_device*
- do not warn on droid_load_driver failure (Tomasz)
- plug mem leak on dri2_create_screen failure (Tomasz)
- fixup function name typo (Tomasz, Rob)
v3:
- add forward declaration for droid_load_driver()
Fixes the HAVE_DRM_GRALLOC build (Mauro)
- split dup() assignment and check in separate lines (Tomasz, Eric)
- make droid_load_driver() static (Tomasz)
- drop unused prop_set variable (Tomasz)
v4:
- rebase
- fwd declarationi should be for droid_probe_device()
Cc: Robert Foss <robert.foss@collabora.com>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Tapani Pälli <tapani.palli@intel.com>
do_assignment validated assigment but when rhs type was not compatible
it proceeded without issues and returned error_emitted = false.
On the other hand process_initializer expected do_assignment to always
return compatible type and never fail.
As a result when variable was initialized with incompatible type
the type of variable changed to the incompatible one.
This manifested in unnecessary error messages and in one case in crash.
Example GLSL:
vec4 tmp = vec2(0.0);
tmp.z -= 1.0;
Past error messages:
initializer of type vec2 cannot be assigned to variable of type vec4
invalid swizzle / mask `z'
type mismatch
operands to arithmetic operators must be numeric
After this patch:
initializer of type vec2 cannot be assigned to variable of type vec4
In the other case when we initialize variable with incompatible struct,
accessing variable's field leaded to a crash. Example:
uniform struct {float field;} data;
...
vec4 tmp = data;
tmp.x -= 1.0;
After the patch there is only error line without a crash:
initializer of type #anon_struct cannot be assigned to variable of
type vec4
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107547
The only thing that matters is the size since we never specify any
offsets in terms of blocks.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
All CTS pass on Polaris/Vega with LLVM 6, 7 and master, so
I think it's safe to enable the feature.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Fixes:
dEQP-VK.api.copy_and_blit.core.blit_image.all_formats.depth_stencil.d32_sfloat_s8_uint_d32_sfloat_s8_uint.optimal_optimal_nearest
And all friends that try to blit a surface with different
depth and stencil formats.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
If we update the program-state etc, we risk compiling needless shaders,
which can cost quite a bit of performance.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
CC: Jason Ekstrand <jason@jlekstrand.net>
Fixes: 82799a5d1b8 ("nir: Add a small pass to rematerialize derefs
per-block")
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
The lcssa and phis_to_regs passes are used by various NIR optimizations
that modify the CFG. Putting a couple of asserts will help ensure that
we don't accidentally put derefs in phis as part of an optimization
pass.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
When we're about to re-arrange a bunch of blocks, it's a good idea to
make sure that we don't have deref uses crossing block boundaries.
Otherwise we may end up with a deref going through a phi and that would
be bad.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Cc: "18.2" <mesa-stable@lists.freedesktop.org>
This pass re-materializes deref instructions on a per-block basis to
ensure that every use of a deref occurs in the same block as the
instruction which uses it.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Cc: "18.2" <mesa-stable@lists.freedesktop.org>
This reverts commit 90819abb56.
This logic was wrong, the original code is correct. The direct
impact is that we allocate up to approximately a squared amount
of memory compared to what we should allocate.
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Only supported by GFX9+.
The conservativeraster Sascha demo seems to work as expected.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Since user defined names are not allowed in core profile
we remove the allow_user_names bool and just check if
we have a core profile like all other buffer/texture
object handling code does.
This extension is required by "Wolfenstein: The Old Blood"
and is exposed in core in the Nvidia binary driver.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This game is looking for some odd extension after creating a core
context such as ARB_vertex_program and EXT_framebuffer_object.
Rather then enabling these in core this forces the game to use
compat. This allows the game to run and seems to work without
issues. All other id tech games/engines use a compat profile.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The HW for FLUSH_ALL_STATE isn't validated, since the closed driver only
uses FLUSH. Now that we don't have any new state at the end of our bin
CLs, follow their lead.
Ever since we added OQ support, we've been clearing OQ state at the start
of the job anyway. We're intentionally breaking old-and-new-driver-mix
systems, because we need to stop using the unvalidated FLUSH_ALL_STATE.
The HW's FLUSH_ALL_STATE is not validated, so we probably shouldn't use
it, meaning that we need to reset state at the start. By doing this, we
also make ourselves more resilient to another client leaving the TF state
enabled at the end of their batch (as we now do, ourselves).
However, we still need to emit a single TF disable at the end of the
frame, for SWVC5-718.
Currently gallium's xlib target will fail to link due to multiple
definitions of all the symbols in libmesautil, this only shows up in
autotools, and not in meson due to differences in the way that meson and
autotools handle linking static archives into static archives. Autotools
uses -Wl,--whole-archive implicitly, meson requires this behavior to be
opted-into. The solution is just to remove libmesautils from the
libgl-xlib target, since it will get all of those symbols form
libmesagallium.
I've dropped the link from meson as well, it doesn't seem to hurt
anything and should make linking just a little faster.
Fixes: 8396043f30
("Replace uses of _mesa_bitcount with util_bitcount")
bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107923
Tested-by: Brian Paul <brianp@vmware.com>
Tested-by: Vinson Lee <vlee@freedesktop.org>
Cc: Sergii Romantsov<sergii.romantsov@globallogic.com>
Rather than trying to encode all of the rules in a header, lets just put
them in the build system where they belong. This fixes the build on
FreeBSD, which does have pthraed_setaffinity_np, but it's in a
pthread_np.h, not behind _GNU_SOURCE. FreeBSD also implements cpu_set
slightly differently, so additional changes would be required to get it
working right there anyway.
v2: - fix #define in autotools
Fixes: 9f1bbbdbbd
("util: try to fix the Android and MacOS build")
Cc: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Missing break; causes parameter checking to
never pass GL_FRAMEBUFFER_FLIP_Y_MESA parameters.
Fixes: 318c265160 ("mesa: GL_MESA_framebuffer_flip_y extension [v4]")
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Instances where direction was determined based on
winsys or user fbo and should be determined based on
FlipY.
Key STATE_FB_WPOS_Y_TRANSFORM for of FlipY instead of
_mesa_is_user_fbo. This corrects gl_FragCoord usage
when applying GL_MESA_framebuffer_flip_y.
Fixes: ab05dd183c ("i965: implement GL_MESA_framebuffer_flip_y [v3]")
Reviewed-by: Brian Paul <brianp@vmware.com>
To get an useful UUID for systems that have a non-useful mtime
for the binaries.
I started using SHA1 to ensure we get reasonable mixing in the
various possibilities and the various build id lengths.
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Not sure if this is all wired up. CTS does pass and the Tangrams
demo works fine on Vega. There are corruption issues on Polaris
but not sure if that related to 16-bit support.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Instead of passing around BOs and offsets, use addresses which are anv's
GPU equivalent of pointers.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Each query slot is a uint64_t and we were only zeroing half of it.
Fixes: 7ec6e4e689 "anv/query: implement multiview interactions"
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Instead of computing an index at the end which we hope maps to the
number of things written, just count the number of things as we go.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
No shader-db changes on any Intel platform... which probably explains
why no bugs have been bisected to this problem since it landed in Mesa
18.1. :( The commit mentioned below is in 18.2, so 18.1 would need a
slightly different fix (due to code refactoring).
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Fixes: 77f269bb56 "i965/fs: Refactor propagation of conditional modifiers from compares to adds"
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com> (reviewed the original patch)
Cc: Matt Turner <mattst88@gmail.com> (reviewed the original patch)
Apparently for compute there are only 16 instead of the 32 for the
graphics path.
Fixes dEQP-VK.binding_model.descriptorset_random.sets16.noarray.ubolimitlow.sbolimitlow.imglimitlow.noiub.comp.0
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Fixes the following building error in vc4 build:
In file included from external/mesa/src/gallium/drivers/vc4/kernel/vc4_render_cl.c:34:
In file included from external/mesa/src/gallium/drivers/vc4/kernel/vc4_drv.h:27:
In file included from external/mesa/src/gallium/drivers/vc4/vc4_simulator_validate.h:34:
In file included from external/mesa/src/gallium/drivers/vc4/vc4_context.h:39:
In file included from external/mesa/src/gallium/drivers/vc4/vc4_cl.h:56:
gen/STATIC_LIBRARIES/libmesa_broadcom_genxml_intermediates/broadcom/cle/v3d_packet_v21_pack.h:12:10:
fatal error: 'cle/v3d_packet_helpers.h' file not found
^~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
Fixes: 5b102160ae ("broadcom/genxml: Introduce a V3D packet/struct decoder.")
Cc: "18.2" <mesa-stable@lists.freedesktop.org>
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Fixes the following building error:
In file included from external/mesa/src/broadcom/cle/v3d_decoder.c:38:
In file included from external/mesa/src/broadcom/cle/v3d_packet_helpers.h:29:
external/mesa/src/gallium/auxiliary/util/u_math.h:42:10:
fatal error: 'pipe/p_compiler.h' file not found
^~~~~~~~~~~~~~~~~~~
1 error generated.
Fixes: 5b102160ae ("broadcom/genxml: Introduce a V3D packet/struct decoder.")
Cc: "18.2" <mesa-stable@lists.freedesktop.org>
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Fixes the following building error, happening when building both intel and broadcom:
Gen Header: libmesa_broadcom_genxml_32 <= v3d_packet_v21_pack.h
FAILED: gen/STATIC_LIBRARIES/libmesa_broadcom_genxml_intermediates/broadcom/cle/v3d_packet_v21_pack.h
/bin/bash -c "python external/mesa/src/broadcom/cle/gen_pack_header.py \
external/mesa/src/broadcom/cle/v3d_packet_v21.xml \
> gen/STATIC_LIBRARIES/libmesa_broadcom_genxml_intermediates/broadcom/cle/v3d_packet_v21_pack.h"
Traceback (most recent call last):
File "external/mesa/src/broadcom/cle/gen_pack_header.py", line 626, in <module>
p = Parser(sys.argv[2])
IndexError: list index out of range
header-gen macro is already defined by Intel genxml building rules
and the existing header-gen does not have the $(PRIVATE_VER) argument,
infact the bash command line logged in the building error is missing
exactly $(PRIVATE_VER) argument
Renaming the macro as pack-header-gen in src/broadcom/Android.genxml.mk
solves the building error, another possible way is to keep the gen rules
commands expanded and not use the macros.
Fixes: 7f80a9ff13 ("vc4: Introduce XML-based packet header generation like Intel's.")
Cc: "18.2" <mesa-stable@lists.freedesktop.org>
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
The offsets now come from the anv_address, these references were not
updated and using the old variable.
Fixes: e1ab834557 "anv/memcpy: Use addresses instead of bo+offset"
Tested-by: Clayton Craft <clayton.a.craft@intel.com>
This shouldn't matter as we'll never write OOB anyway but we may as well
get it right. It's supposed to be in dwords - 1.
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Because this was setting image to true we would end up calling
si_load_image_desc() when we sould be calling
si_load_sampler_desc().
This fixes an assert() in Deus Ex: MD
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
When using Freecad, I was getting intermittent segfaults inside of
mesa. I traced it down to this path in st_cb_drawpixels.c where the
result of pipe_transfer_map wasn't being checked. In my case, it was
returning NULL because nouveau_bo_new returned ENOENT. I'm by no
means a mesa developer, but this patch solves the problem for me and
seems reasonable enough.
v2: Marek - also unmap the PBO and release the texture, and call
the make_texture function sooner for less cleanup
Cc: 18.1 18.2 <mesa-stable@lists.freedesktop.org>
It shouldn't be needed to emit the initial graphics or compute
state when beginning a new command buffer. Emitting them in
the preamble should be enough and this will reduce IB sizes.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Indirect descriptors only need one entry, we don't have to
emit a location for every descriptors.
Fixes GPU hangs with new CTS:
dEQP-VK.binding_model.descriptorset_random.*
CC: 18.2 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Let say, we first bind a graphics pipeline that needs indirect
descriptors sets. The userdata pointers will be emitted at draw
time. Then if we bind a compute pipeline that doesn't need any
indirect descriptors, the driver will re-emit them for all
grpahics stages.
To avoid this to happen, just check the bind point type.
CC: 18.2 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This was wrong for descriptor #0 when all of them are indirect.
This is because indirect_offset was 0 and we emitted a
"normal" descriptor pointer for nothing.
While we are at it remove
radv_userdata_info::indirect_offset which is useless.
CC: 18.2 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
According to RadeonSI, it's unnecessary to multiply by
the stride. That field seems to always be 64.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Instead of having holes. The other ring parameters like
offset and stride can be updated later.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This is just for consistency because LLVM can detect and
remove unused loads.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Same code is generated because LLVM ends up by using bfe, but
that seems cleaner to me.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
In GLSL IR we cheat with switch statements and simply convert them
into loops with a single iteration. This allowed us to make use of
the existing jump instruction handling provided by the loop handing
code, it also allows dead code to be cleaned up once we have
wrapped the code in a loop.
However using loops in this way created previously unrollable loops
which limits further optimisations. Here we provide a way to unroll
loops that end in a break and have multiple other exits.
All shader-db changes are from the dolphin uber shaders. There is a
small amount of HURT shaders but in general the improvements far
exceed the HURT.
shader-db results IVB:
total instructions in shared programs: 10018187 -> 10016468 (-0.02%)
instructions in affected programs: 104080 -> 102361 (-1.65%)
helped: 36
HURT: 15
total cycles in shared programs: 220065064 -> 154529655 (-29.78%)
cycles in affected programs: 126063017 -> 60527608 (-51.99%)
helped: 51
HURT: 0
total loops in shared programs: 2515 -> 2308 (-8.23%)
loops in affected programs: 903 -> 696 (-22.92%)
helped: 51
HURT: 0
total spills in shared programs: 4370 -> 4124 (-5.63%)
spills in affected programs: 1397 -> 1151 (-17.61%)
helped: 9
HURT: 12
total fills in shared programs: 4581 -> 4419 (-3.54%)
fills in affected programs: 2201 -> 2039 (-7.36%)
helped: 9
HURT: 15
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v2:
- only allow nir_op_inot or nir_op_b2i when alu input is 1.
- use some helpers as suggested by Jason.
v3:
- evaluate alu op for single input alu ops
- add helper function to decide if to propagate through alu
- make use of nir_before_src in another spot
shader-db IVB results:
total instructions in shared programs: 9993483 -> 9993472 (-0.00%)
instructions in affected programs: 1300 -> 1289 (-0.85%)
helped: 11
HURT: 0
total cycles in shared programs: 219476091 -> 219476059 (-0.00%)
cycles in affected programs: 7675 -> 7643 (-0.42%)
helped: 10
HURT: 1
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Since we know what side of the branch we ended up on we can just
replace the use with a constant.
All the spill changes in shader-db are from Dolphin uber shaders,
despite some small regressions the change is clearly positive.
V2: insert new constant after any phis in the
use->parent_instr->type == nir_instr_type_phi path.
v3:
- use nir_after_block_before_jump() for inserting const
- check dominance of phi uses correctly
v4:
- create some helpers as suggested by Jason.
v5 (Jason Ekstrand):
- Use LIST_ENTRY to get the phi src
shader-db results IVB:
total instructions in shared programs: 9999201 -> 9993483 (-0.06%)
instructions in affected programs: 163235 -> 157517 (-3.50%)
helped: 132
HURT: 2
total cycles in shared programs: 231670754 -> 219476091 (-5.26%)
cycles in affected programs: 143424120 -> 131229457 (-8.50%)
helped: 115
HURT: 24
total spills in shared programs: 4383 -> 4370 (-0.30%)
spills in affected programs: 1656 -> 1643 (-0.79%)
helped: 9
HURT: 18
total fills in shared programs: 4610 -> 4581 (-0.63%)
fills in affected programs: 374 -> 345 (-7.75%)
helped: 6
HURT: 0
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
When we're mapping temp-resources, we clip the resource to the
transfer-box, which means the stride might not be correct any more.
So let's update the stride from the temp-resource, and recompute the
layer-stride.
This fixes crashes when running dEQP with --deqp-gl-config-name=rgba8888d24s8ms4
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Fixes: a8987b88ff "virgl: add driver for virtio-gpu 3D (v2)"
Reviewed-by: Dave Airlie <airlied@redhat.com>
Those operations do not map to actual hardware instructions, therefore
those should always be lowered to 32-bit instructions.
Fixes: 009c54aa7a "nv50/ir: Split 64-bit integer MAD/MUL operations"
Signed-off-by: Pierre Moreau <pierre.morrow@free.fr>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Using output buffer with 8 bits video RGB as back buffer
certainly is not working for 30 bits color depth visual.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
v2: Tell B10G10R10X2 and R10G10B10X2 formats for different HW.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
We only need to wait for the fence before drawing to a buffer, not
before reading from it.
This might avoid hangs when re-allocating the fake front buffer, similar
to the previous change. But I haven't seen any evidence that this was
actually happening in practice.
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
From Section 4.6.4 (Invariance and Linkage) of the GLSL ES 1.0 specification
"The invariance of varyings that are declared in both the vertex and
fragment shaders must match. For the built-in special variables,
gl_FragCoord can only be declared invariant if and only if
gl_Position is declared invariant. Similarly gl_PointCoord can only
be declared invariant if and only if gl_PointSize is declared
invariant. It is an error to declare gl_FrontFacing as invariant.
The invariance of gl_FrontFacing is the same as the invariance of
gl_Position."
Fixes:
* glsl-pcoord-invariant.shader_test
* glsl-fcoord-invariant.shader_test
* glsl-fface-invariant.shader_test
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107734
Signed-off-by: Vadym Shovkoplias <vadym.shovkoplias@globallogic.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Currently position is set before widgets are sized by gtk and
calculation can get wrong results where window is positioned
offscreen. Patch fixes this by setting aubfile window position
as 0,0 only when size_allocate has been called to the widget.
Now window is always positioned to 0,0 if imgui.ini is missing.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
If we end up never taking the loop that writes ret, we can end up with
an uninitialized value, and if we're *really* unlucky, that value can
be -1, causing us to go down an error-path instead of a success path.
This was obviously not intended, so let's just initialize this to zero.
Noticed by Valgrind:
Conditional jump or move depends on uninitialised value(s)
at 0xBA640A0: virgl_drm_winsys_resource_cache_create (virgl_drm_winsys.c:348)
by 0xBA62FCF: virgl_buffer_create (virgl_buffer.c:170)
by 0xBA605AC: virgl_resource_create (virgl_resource.c:60)
by 0xBCF816F: bufferobj_data (st_cb_bufferobjects.c:344)
by 0xBCF816F: st_bufferobj_data (st_cb_bufferobjects.c:390)
by 0xBB7E836: vbo_use_buffer_objects (vbo_exec_api.c:1136)
by 0xBCFCC6E: st_create_context_priv (st_context.c:414)
by 0xBCFD3CD: st_create_context (st_context.c:590)
by 0xBBB30CA: st_api_create_context (st_manager.c:896)
by 0xB981E76: dri_create_context (dri_context.c:155)
by 0xB97BDCE: driCreateContextAttribs (dri_util.c:473)
by 0x5288331: dri3_create_context_attribs (dri3_glx.c:309)
by 0x5264D64: glXCreateContextAttribsARB (create_context.c:78)
Fixes: a8987b88ff ("virgl: add driver for virtio-gpu 3D (v2)")
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Gallium may pick L16A16_FLOAT to represent GL_INTENSITY16F if no intensity
format is provided by the driver. However, when calling
glGetTexLevelParameteriv(..., GL_TEXTURE_INTENSITY_SIZE, ...)
mesa will return a zero size because the actually used format has no
intensity channel and as a fallback only the sizes of the red/green
channels are checked.
Also checking for LA sizes in the allocated texture resolves this problem.
v2: Only check alpha channel size and return it (Marek)
L and A size are always the same in this case.
Fixes (on virgl):
ext_framebuffer_multisample-fast-clear GL_ARB_texture_float *
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107832
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Not handling caps explicitly means that we're likely getting incorrect
values -- these need to be reviewed and set appropriately.
While we're at it, add in some missing caps, and set all the subpixel
stuff to 8 as that seems to be what the blob reports.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
This removes duplicate tests from gl_core_functions_possible
that are already covered by common_desktop_functions_possible.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This patch fixes the following Piglit test:
spec@egl_mesa_configless_context@basic
It also fixes few test in a virgl guest.
v2: Evaluate the value of no_config (Ilia)
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Elie Tournier <elie.tournier@collabora.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
This patch extends the format_conversion table to support
different view formats on texture buffer.
For legacy image formats such as INTENSITY, LUMINANCE, LUMINANCE_ALPHA,
special swizzle masks will be used on the red or RG channels.
This fixes piglit test arb_texture_buffer_object-formats fs|vs arb
Reviewed-by: Brian Paul <brianp@vmware.com>
The svga_reemit_gs_bindings function is no longer needed. Remove it.
Reviewed-by: Neha Bhende <bhenden@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Fixes a crash since the variant object isn't allocated until later
in the function. Not sure how this got through.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
This patch makes sure a valid color buffer is bound before
checking its resource. This fixes Unigine Valley running in SM41 device.
Reviewed-by: Brian Paul <brianp@vmware.com>
This fixes some of tests cases in arb_copy_image-formats and also fixes
SurfaceCopy related errors in vmware.log when multi sampled surfaces are
used.
Tested with piglit, glretrace on windows and linux VM.
v2: As per Brian's comment
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
According to the current SVGA contract, any view format can be
used on the underlying resource that is multisample. So there
is no need to check the MULTISAMPLE devcap for the view format.
Fixes black rendering issue with Tropics running with 4xMSAA.
Reviewed-by: Brian Paul <brianp@vmware.com>
Explicit set the DXFMT_SHADER_SAMPLE bit for depth stencil formats
for pre-SM41 device only. This bit is now set by the SM41 device.
Reviewed-by: Brian Paul <brianp@vmware.com>
See comments for details. This allows the piglit
ext_framebuffer_multisample-point-smooth test to pass.
Also, test the pipe_rasterizer_state::point_quad_rasterization field
to see if sprite point rasterization is needed because it's possible
for no sprite_coord_enable bits to be set when drawing sprites.
Finally, remove old, stale comments.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
If real MSAA is not available, we only support 1 sample/pixel. In that
case, we must not declare MSAA resources or emit MSAA opcodes. Do that
by checking the sample count.
Fixes several piglit MSAA tests, such as
arb_texture_multisample-sample-depth (when the hard-coded sample count
of 4 is fixed in that test).
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
We removed the special cases referred to in this comment in the commit
"svga: add a separate function to get dx format capabilities from
vgpu10 device".
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Technically, SM4.1 doesn't support cube map arrays, but our backend
renderers actually do. This allows the Piglit textureGather cube
map array tests to pass.
Tested with GLrenderer, DX11renderer and SWrenderer.
Reviewed-by: Neha Bhende <bhenden@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Force direct map on multisample surface.
Fixes SVGA Driver Errors running multisample piglit tests on Linux VM
v2: use texture for the check.
Reviewed-by: Neha Bhende <bhenden@vmware.com>
Fixes SVGA Driver Errors with piglit test arb_copy_image-targets
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Neha Bhende <bhenden@vmware.com>
In commit e4048f6cd1, svga_is_dx_format_supported() is supposed to
also check the SVGA3D_DXFMT_MULTISAMPLE bit for multisample
support of a format. Somehow that code is not included in that commit.
This patch fixes it.
Fixes piglit test spec@ext_framebuffer_multisample@formats all_samples.
Reviewed-by: Brian Paul <brianp@vmware.com>
Commit e4048f6cd1 unintentionally allows multisample support for VGPU9 device.
This patch fixes this regression.
Reviewed-by: Neha Bhende <bhenden@vmware.com>
Currently we have one function to get format capabailities and
we convert DX10 devcaps back to DX9. This can be confusing.
Going forward we will have a separate function for dealing with dx formats.
This patch also fixes the depth stencil devcap. Instead of hardcoding
the capabilities for the depth stencil formats, we will inquire the
device for the capabilities. Note: we will still need to explicity set
the SVGA3D_DXFMT_SHADER_SAMPLE bit for SVGA3D_R32_FLOAT_X8X24 and
SVGA3D_R24_UNORM_X8 since this bit is not advertised but supported
by the device.
v2: reapply the patch after svga_is_format_supported is moved to svga_format.c
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Neha Bhende <bhenden@vmware.com>
This patch adds a new function svga_is_dx_format_supported() to check
for format support in a VGPU10 device.
v2: reapply the patch after svga_is_format_supported is moved to svga_format.c
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Neha Bhende <bhenden@vmware.com>
Fixes piglit tests spec@arb_sample_shading@builtin-gl-sample-position 2
spec@arb_texture_multisample@fb-completeness@2
Reviewed-by: Brian Paul <brianp@vmware.com>
As with 1D and 2D array textures, if there's only one array element
(one cubemap in this case) we have to issue different shader code.
This fixes a number of Piglit cubemap array tests.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
No need to check for HW_CAPS2 or SM4_1 support if VGPU10 is not
enabled or is explicitly disabled via the environment variable
SVGA_VGPU10.
Reviewed-by: Deepak Rawat <drawat@vmware.com>
A new argument "quality level" is added in surface define v3 which
represets precision settings for surface. This commit add support
for quality level in DRM_VMW_GB_SURFACE_CREATE_EXT and
DRM_VMW_GB_SURFACE_REF_EXT.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
With drm version 2_15, we can inquire for support of HW_CAP2.
If it is supported, we can enable intra_surface_copy support.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
This patch fixes the layer index when rendering to a
backed surface view of a cubemap array.
Fixes piglit test fbo-generatemipmap-cubemap array.
Reviewed-by: Brian Paul <brianp@vmware.com>
Texture swizzling for texture gather needs to be done to the selected texels
rather than to the returned vector. This patch has specical cases
for the different swizzles in emit_tg4().
Fixes a lot of piglit texture gather tests.
Reviewed-by: Neha Bhende <bhenden@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Currently, the starting index for system values is assigned to
the next index after the highest index of the tgsi declared input registers.
But the tgsi index might be different from the actual assigned index, hence
this might cause overlap of indices.
With this patch, the shader linker keeps track of the highest index of the
translated input registers, and the next index will be used for the
starting index for system values.
Fixes SHIM errors running arb_copy_image-formats on SM4_1 device.
Reviewed-by: Brian Paul <brianp@vmware.com>
Kernel driver version 2.15 added new surface ioctl named:
DRM_VMW_GB_SURFACE_CREATE_EXT
DRM_VMW_GB_SURFACE_REF_EXT
The new ioctl has support for 64-bit svga3d_flags if
DRM_VMW_PARAM_SM4_1 is available.
Multisampling surface mob size calculation is added. Also synced the
relevant header update.
svga device modified the surface define command V3 with new parameter
multisampling pattern. Adding support for that in winsys.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
The SVGA device is deprecating the DX9 MSAA support.
This patch enables MSAA for SM4_1 device by explicitly
setting the SVGA3D_SURFACE_MULTISAMPLE bit.
For SM4_1 device, only 4 samples is supported.
Reviewed-by: Brian Paul <brianp@vmware.com>
Just translate the TGSI LODQ intruction to VGPU10 LOD instruction.
All (4) Piglit GL_ARB_texture_query_lod tests pass.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Neha Bhende <bhenden@vmware.com>
With sm4_1, we can support single channel 2D or CubeMap textures.
This patch exercises this feature.
Tested with piglit
v2: As per Brian's comment
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Vs. sampling at the centroid or the fragment center.
Note that this does not fix failures with the Piglit
arb_sample_shading-interpolate-at-sample-position or
arb_sample_shading-ignore-centroid-qualifier.exe tests at this time.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
We translate TGSI system value registers to VGPU10 input registers.
Add a comment and set file = TGSI_FILE_INPUT. That's not stricly
necessary since we map both TGSI_FILE_INPUT and TGSI_FILE_SYSTEM_VALUE
to VGPU10_OPERAND_TYPE_INPUT, but this makes the code a bit more
understandable.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
This, with the previous work for sample position/id query, allows
us to enable per-sample shading for VGPU 10.1.
Note that quite a few Piglit arb_sample_shading tests still do not
pass, but many do.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Sample ID is just a system value. Sample position must be implemented
with the VGPU10_OPCODE_SAMPLE_POS instruction.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
This patch adds support for GL_ARB_draw_buffers_blend extension
for SM4_1 device.
Fixes piglit test fbo-draw-buffers-blend.
This patch is squashed with a subsequent patch which fixed a
regression.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Neha Bhende <bhenden@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Fixes piglit test arb_texture_cube_map_array-fbo-cubemap-array
Reviewed-by: Neha Bhende <bhenden@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
This patch adds support for cubemap array texture lookup with
explicit LOD.
Fixes piglit test arb_texture_cube_map_array-cubemap-lod
Reviewed-by: Neha Bhende <bhenden@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
This patch adds support for cubemap array for SM4_1.
Fixes piglit test arb_texture_cube_map_array-cubemap
Reviewed-by: Neha Bhende <bhenden@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Spite using thrd_t types, these functions are wed to pthreads, and break
Windows builds, because thrd_current() is not implemented there, as it's
impossible to have an efficient thrd_current() implementation on
Windows.
Trivial.
When creating textures, we avoid creating backing-store for all
multisampled textures, not just depth buffers.
So we can't try to map them later. That's just going to fail. So
let's take the blit-based code-path that seems to avoid this problem.
This make this piglit test-case no longer crash (although it still
fails):
bin/copyteximage 2D -samples=2 -auto
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
We don't use the size we calculate in this function, so let's just
drop the calculation
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
We always return TRUE, and we never check the return-value. Let's
just drop the return value instead.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
When we fail to map memory, we should also free trans to avoid
leaking memory.
Noticed while reading code.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Introduce a new capability for the maximum value of
pipe_vertex_element::src_offset. Initially just every driver
backend returns the value previously set from _mesa_init_constants.
So this shall end up in no functional change.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
This fixes the situation where we'd send a shader with just the
header and no data.
piglit/glsl-max-varyings test was causing this to happen, and
the renderer fix was breaking it.
v2: drop fprintf
Fixes: a8987b88ff "virgl: add driver for virtio-gpu 3D (v2)"
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
This extension is required by "Wolfenstein: The Old Blood"
and is exposed in core in the Nvidia binary driver.
All the functions are just alias of the core functions so
there should be nothing more to do.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The Vulkan 1.1.81 spec says:
"It is legal for offset.x + extent.width or offset.y + extent.height
to exceed the dimensions of the framebuffer - the scissor test still
applies as defined above. Rasterization does not produce fragments
outside of the framebuffer, so such fragments never have the scissor
test performed on them."
Elsewhere, the Vulkan 1.1.81 spec says:
"The application must ensure (using scissor if necessary) that all
rendering is contained within the render area, otherwise the pixels
outside of the render area become undefined and shader side effects
may occur for fragments outside the render area. The render area
must be contained within the framebuffer dimensions."
Unfortunately, there's some room for interpretation here as to what the
consequences are of having the render area set to exactly the
framebuffer dimensions and having a scissor that is larger than the
framebuffer. Given that GL and other APIs provide automatic clipping to
the framebuffer, it makes sense that applications would assume that
Vulkan does this as well. It costs us very little to play it safe and
just clamp client-provided scissors to the framebuffer dimensions.
Fortunately, the user is required to provide us with at least one
scissor so we don't need to handle the case where they don't.
Fixes: fb2a5ceb32 "anv: Emit DRAWING_RECTANGLE once at driver..."
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
State trackers will not use the new param directly, but will instead use
a helper in MakeCurrent that does the right thing.
v2: rework the interface
Reviewed-by: Brian Paul <brianp@vmware.com>
and _mesa_bitcount_64 with util_bitcount_64. This fixes a build problem
in nir for platforms that don't have popcount or popcountll, such as
32bit msvc.
v2: - Fix additional uses of _mesa_bitcount added after this was
originally written
Acked-by: Eric Engestrom <eric.engestrom@intel.com> (v1)
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Currently we have two sets of functions for bit counts, one in gallium
and one in core mesa. The ones in core mesa are header only in many
cases, since they reduce to "#define _mesa_bitcount popcount", but they
provide a fallback implementation. This is important because 32bit msvc
doesn't have popcountll, just popcount; so when nir (for example)
includes the core mesa header it doesn't (and shouldn't) link with core
mesa. To fix this we'll promote the version out of gallium util, then
replace the core mesa uses with the util version, since nir (and other
non-core mesa users) can and do link with mesautils.
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
gen9 hardware has a bug in the sampler cache that can cause GPU hangs
whenever an texture with aux compression enabled is in the sampler cache
together with an ASTC5x5 texture. Because we can't control what the
client binds at any given time, we have two options: resolve the CCS or
decompresss the ASTC. Doing a CCS or HiZ resolve is far less drastic
and will likely have a smaller performance impact.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Tested-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
There were two bugs working together to make things mostly work: I wasn't
dividing the VPM output size available by the size of a batch (vertex),
but I also had the size of the VPM reduced by a factor of 8.
Fixes dEQP-GLES3.functional.vertex_array_objects.all_attributes and it
seems also my intermittent varying failures.
Fixes: 1561e4984e ("v3d: Emit the VCM_CACHE_SIZE packet.")
Fixes
dEQP-GLES3.functional.fragment_ops.blend.default_framebuffer.rgb_func_alpha_func.dst.src_alpha_saturate_src_alpha_saturate
and friends with --deqp-egl-config-name=rgb565d0s0
Cc: "18.2" <mesa-stable@lists.freedesktop.org>
The brw_vs_prog_data::double_inputs_read field comes directly from
shader_info::double_inputs which may contain inputs which are not
actually read. Instead of using it directly, AND it with inputs_read
which is only things which are read. Otherwise, we may end up
subtracting too many elements when computing elem_count.
Cc: mesa-stable@lists.freedesktop.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103241
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
It was very inconsistently handled; the only things that made use of it
were glsl_to_nir, glspirv, and nir_gather_info. In particular,
nir_lower_io completely ignored it so anyone using nir_lower_io on
64-bit vertex attributes was going to be in for a shock. Also, as of
the previous commit, it's set by every driver that supports 64-bit
vertex attributes. There's no longer any reason to have it be an option
so let's just delete it.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
We were going out of our way to disable dual-location re-mapping in NIR
only to then do the remapping in st_glsl_to_nir.cpp. Presumably, this
was so that double_inputs would be correct for the core state tracker.
However, now that we've it to gl_program::DualSlotInputs which is
unaffected by NIR lowering, we can let NIR lower things for us. The one
tricky bit here is that we have to remap the inputs_read bitfield back
to the single-slot convention for the gallium state tracker to use.
Since radeonsi is the only NIR-capable gallium driver that also supports
GL_ARB_vertex_attrib_64bit, we only have to worry about radeonsi when
making core gallium state tracker changes.
Acked-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Previously, we had two field in shader_info: double_inputs_read and
double_inputs. Presumably, the one was for all double inputs that are
read and the other is all that exist. However, because nir_gather_info
regenerates these two values, there is a possibility, if a variable gets
deleted, that the value of double_inputs could change over time. This
is a problem because double_inputs is used to remap the input locations
to a two-slot-per-dvec3/4 scheme for i965. If that mapping were to
change between glsl_to_nir and back-end state setup, we would fall over
when trying to map the NIR outputs back onto the GL location space.
This commit changes the way slot re-mapping works. Instead of the
double_inputs field in shader_info, it adds a DualSlotInputs bitfield to
gl_program. By having it in gl_program, we more easily guarantee that
NIR passes won't touch it after it's been set. It also makes more sense
to put it in a GL data structure since it's really a mapping from GL
slots to back-end and/or NIR slots and not really a NIR shader thing.
Tested-by: Alejandro Piñeiro <apinheiro@igalia.com> (ARB_gl_spirv tests)
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
By the time Mesa 18.3 comes out (probably December '18), Meson 0.45 will
be 9 months old (March '18), so I think this is reasonable.
(btw, the currently-required Meson 0.44.1 was released less than 12 days
before 0.45, so we're really not bumping by much.)
Currently, the Meson versions in the major distributions are:
Arch: ships 0.47.2
CentOS: 7 ships 0.47.1
Debian: stable ships 0.37.1, so it hasn't been usable in a long time.
everything more recent ships 0.47.2
Fedora: 28 ships 0.45.1
FreeBSD: ships 0.46.1 (ports)
Gentoo: ships 0.46.1
OpenSUSE: 15 ships 0.46
Ubuntu: 18.04 ships 0.45.1
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
We should exit from the function 'util_vasprintf'
with error code -1 for case where 'malloc'
returns NULL
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Fixes: 864148d69e "util: add util_vasprintf() for Windows (v2)"
Signed-off-by: Andrii Simiklit <andrii.simiklit@globallogic.com>
The current minimum meson version supported is 0.44.1, so we have met
both the 0.43 and 0.44 requirement to not need these hacks anymore :)
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Fix an other regression of
mesa: Make gl_vertex_array contain pointers to first order VAO members.
The regression showed up with drivers using the tnl module and
was reproducible using xonotic-glx -benchmark demos/the-big-keybench.dem.
Fixes: 64d2a20480
mesa: Make gl_vertex_array contain pointers to first order VAO members.
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
If we have something like:
#ifdef NOT_DEFINED
#define A_MACRO(x) \
if (x)
#endif
The # on the #define is not skipped but the define itself is so
this then gets recognised as #if.
Until 28a3731e3f this didn't happen because we ended up in
<HASH>{NONSPACE} where BEGIN INITIAL was called stopping the
problem from happening.
This change makes sure we never call RETURN_TOKEN_NEVER_SKIP for
if/else/endif when processing a define.
Cc: Ian Romanick <idr@freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107772
Tested-By: Eero Tamminen <eero.t.tamminen@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
For example,
result0 = texture(sampler[indexBase + 5], coords);
result1 = texture(sampler[indexBase + 0], coords);
result2 = texture(sampler[indexBase + 0], coords);
out_result0 = result0;
out_result1 = result1;
out_result2 = result2;
In this kind of case we need to insert an extra mov to the outputs
so that the result could be assigned to each register respectively.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Since most shaders wouldn't need that large array of immediates, making
the array dynamic could save unnecessary spaces.
In addition, sometimes we can potentially have a much larger array
of immediates to be lowered, which might be more than 64.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Port fixes from a5xx (f0715442)
TODO maybe this should move to shared code, since it seems to be the
same.
Signed-off-by: Rob Clark <robdclark@gmail.com>
The border_color_uploaders need to be torn down before the transfer_pool
is destroyed.
Fixes: e11e9d6394 freedreno: fix context teardown race
Signed-off-by: Rob Clark <robdclark@gmail.com>
We could end up w/ inputs larger than vec4, simply because unused inputs
are not split.
Fixes things like dEQP-GLES31.functional.separate_shader.random.77 (and
probably a handful of others)
Signed-off-by: Rob Clark <robdclark@gmail.com>
We require a single version of libdrm for all of our libdrm
dependencies (core and driver), but the way this is structured can make
the error message less than helpful, as one driver might be the one
setting the libdrm requirement, while another might be the one that
generates the version failure.
This adds a simple message to the output announcing which libdrm module
set the version, which might be more helpful.
v2: - Use message suggested by Eric Engstrom
Fixes: c445b1d56f
("meson: Use the same version for all libdrm checks")
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
SVGA device now supports 64 bits surface flags. This patch
updates the winsys interface to allow 64 bits surface flags.
The linux winsys layer will for now only honor the lower 32 bits of
the surface flags.
Reviewed-by: Brian Paul <brianp@vmware.com>
On non vgpu10, driver doesn't support util_blitter_blit for SVGA3D_Z_D16,
SVGA3D_Z_D24x8, SVGA3D_Z_D24S8. Patch fixes following piglit tests regression on hwv8 caused
by commit 27bf35caea5e:
spec@arb_depth_texture@fbo-depth-gl-depth-component16-blit
spec@arb_depth_texture@fbo-depth-gl-depth-component24-blit
spec@arb_depth_texture@fbo-depth-gl-depth-component32-blit
Tested with mtt-piglit on hw 8,9,10,11,13 and mtt-glretrace on windows and linux.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
When blending is enabled, framebuffer colorspace has to be linear.
Previously, we never hit this case because we were not supporting sRGB
drawable. Previous patch added that support.
Tested with mtt glretrace, viewperf, piglit, conform.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Basically, SVGA3dCmdIntraSurfaceCopy command allow copying when
source and destination are same.
Tested with MTT piglit, glretrace, viewperf, conform
v2: changes as per Charmaine's comment
v3: changes as per Charmaine's comment
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
This patch makes sure there is a valid fd before merging it
to the context's fd in vmw_svga_winsys_fence_server_sync().
This fixes the assert running webot.
No regression running kmscube.
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
This is the second patch needed to fix the following piglit tests:
tests/spec/arb_gl_spirv/linker/uniform/multisampler.shader_test
tests/spec/arb_gl_spirv/linker/uniform/multisampler-array.shader_test
Although in this case it doesn't affect so many borrowed tests, as
there aren't too many tests using multisamplers on Intel.
It is worth to note that this patch is also needed when those tests
are run on GLSL mode (using the --glsl option). Although most Intel
drivers would not be able to run/execute tests using multisamplers, as
GL_MAX_IMAGE_SAMPLES is zero, technically those tests are expected to
link correctly, so linking tests should pass.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
At this moment that lowering is using info coming from the
UniformStorage, so for the ARB_gl_spirv codepath, it needs to be done
after calling gl_nir_link_uniforms. As for the GLSL codepath it can
also be called later, we just move the call on both cases, to avoid
adding several shader->spirv_data checks, and keep the patch as small
as possible.
This is the first patch needed to fix the following piglit tests:
tests/spec/arb_gl_spirv/linker/uniform/multisampler.shader_test
tests/spec/arb_gl_spirv/linker/uniform/multisampler-array.shader_test
but fixes thousands of tests when borrowing the tests from other specs
(that needs to be done manually right now).
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
To brw_nir_lower_gl_images, as it will be also used on the
ARB_gl_spirv codepath, that doesn't involves GLSL at all. So the
lowering is about images following the OpenGL semantics. In any case
"brw_nir_lower_opengl_images" seemed too long to me, so I just used
gl. That shortening is already used on other parts of the code.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The resource bo array must already extended when the target index is
equal to the current size of the array.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Silences:
Conditional jump or move depends on uninitialised value(s)
at 0xB72F2C0: virgl_drm_winsys_create (virgl_drm_winsys.c:854)
by 0xB72F2C0: virgl_drm_screen_create (virgl_drm_winsys.c:926)
by 0xB21C885: pipe_virgl_create_screen (drm_helper.h:275)
by 0xB7201F0: pipe_loader_create_screen (pipe_loader.c:137)
by 0xB639C91: dri2_init_screen (dri2.c:2112)
by 0xB634F68: driCreateNewScreen2 (dri_util.c:153)
by 0x63023E6: dri3_create_screen (dri3_glx.c:893)
by 0x62D35BD: AllocAndFetchScreenConfigs (glxext.c:820)
by 0x62D35BD: __glXInitialize (glxext.c:946)
by 0x62CECB3: GetGLXPrivScreenConfig (glxcmds.c:174)
by 0x62CF69C: glXQueryExtensionsString (glxcmds.c:1304)
by 0x60AA7D9: ??? (in /usr/lib/x86_64-linux-gnu/libwaffle-1.so.0.5.2)
by 0x4F81450: wfl_checked_display_connect (piglit-util-waffle.h:74)
by 0x4F829E0: piglit_wfl_framework_init (piglit_wfl_framework.c:627)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Fixes crash with
piglit/bin/map_buffer_range-invalidate CopyBufferSubData \
increment-offset -auto -fbo
* Resize the resource storage already when the count is equal to the
allocated size, fixes:
Invalid write of size 8
at 0xB72E4CF: virgl_drm_add_res (virgl_drm_winsys.c:629)
by 0xB72E4CF: virgl_drm_emit_res (virgl_drm_winsys.c:663)
by 0xB72A44A: virgl_encode_resource_copy_region (virgl_encode.c:776)
by 0xB40CD12: st_copy_buffer_subdata (st_cb_bufferobjects.c:585)
by 0xB244A3B: _mesa_CopyBufferSubData (bufferobj.c:2940)
by 0x109A1E: upload (invalidate.c:169)
by 0x109C2F: piglit_display (invalidate.c:215)
by 0x4F80FBE: run_test (piglit_fbo_framework.c:52)
by 0x4F66E5F: piglit_gl_test_run (piglit-framework-gl.c:229)
by 0x10949D: main (invalidate.c:47)
Address 0xbe07d30 is 0 bytes after a block of size 4,096 alloc'd
at 0x4C31B25: calloc (in
/usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0xB72DAAF: virgl_drm_cmd_buf_create (virgl_drm_winsys.c:567)
* Also resize the space allocated for the handles, fixes:
Invalid write of size 4
at 0xB72E4F0: virgl_drm_add_res (virgl_drm_winsys.c:631)
by 0xB72E4F0: virgl_drm_emit_res (virgl_drm_winsys.c:663)
by 0xB72A44A: virgl_encode_resource_copy_region (virgl_encode.c:776)
by 0xB40CD12: st_copy_buffer_subdata (st_cb_bufferobjects.c:585)
by 0xB244A3B: _mesa_CopyBufferSubData (bufferobj.c:2940)
by 0x109A1E: upload (invalidate.c:169)
by 0x109C2F: piglit_display (invalidate.c:215)
by 0x4F80FBE: run_test (piglit_fbo_framework.c:52)
by 0x4F66E5F: piglit_gl_test_run (piglit-framework-gl.c:229)
by 0x10949D: main (invalidate.c:47)
Address 0xbe08570 is 0 bytes after a block of size 2,048 alloc'd
at 0x4C2FB0F: malloc (
in /usr/lib/valgrind/vgpreload_memcheck-amd64- linux.so)
by 0xB72DAC8: virgl_drm_cmd_buf_create (virgl_drm_winsys.c:572)
Fixes: 4b15b5e803 ("virgl: resize resource bo allocation if we need to.")
v2: - Use REALLOC macro and avoid memory leak when re-allocation fails
- add Fixes tag (both Emil Velikov)
- reorder commit message
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Emulating atomics on top of ssbos can lead to too small max SSBO count,
so let's use the hw-atomics mechanism to expose atomic buffers instead.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
virgl_protocol.h is considered to have it's upstream in the
virglrenderer repository, and somehow these minor differences has
crept in.
Let's sync with the upstream to avoid this.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
This moves the evergreen-specific max-sizes out as a driver-cap, so
other drivers with less strict requirements also can use hw-atomics.
Remove ssbo_atomic as it's no longer needed.
We should now be able to use hw-atomics for some stages and not for
other, if needed.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
This gets rid of a r600 specific hack in the state-tracker, and prepares
for other drivers to be able to use hw-atomics.
While we're at it, clean up some indentation in the various drivers.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
MaxAtomicCounters has already been assigned in the loop above in the
ssbo_atomic = true case, so this will calculate the same value as the
default.
While we're at it, fixup indentation on the MaxAtomicBufferBindings
assign.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
This makes the code a bit easier to follow; we first set up
MaxShaderStorageBlocks, then we either set up a dedicated
MaxAtomicBuffers, or we split MaxShaderStorageBlocks in two.
While we're at it, also make the SSBO-splitting code tolerate the
hypothetical case of having an odd number of SSBOs without incorrectly
dropping the last SSBO.
This has the nice result that the SSBOs and atomic buffers are dealt
with almost completely orthogonally, easing some upcoming patches.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
GL_STENCIL_INDEX uses GL_INTENSITY for the border color, which is nicer
to hardware that doesn't read the stencil border value from the X channel.
This fixes a bunch of dEQP tests on Vega & Raven.
Cc: 18.1 18.2 <mesa-stable@lists.freedesktop.org>
Reported by Coverity: arr_live_ranges is freed in a different branch
than the one in which it was allocated.
Signed-off-by: Ernestas Kulik <ernestas.kulik@gmail.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Now that we have the util function for the default values, we can get rid
of the boilerplate.
v2: Rebase on new gallium caps
Reviewed-by: Rob Clark <robdclark@gmail.com> (v1)
Now that we have the util function for the default values, we can get rid
of the boilerplate.
v2: drop GLSL level in favor of defaults.
v3: Rebase on new gallium caps
One of the pains of implementing a gallium driver is filling in a million
pipe caps you don't know about yet when you're just starting out. One of
the pains of working on gallium is copy-and-pasting your new PIPE_CAP into
each driver. We can fix both of these by having each driver call into the
default helper from their default case, so that both sides can ignore each
other until they need to.
v2: fix i915g build, revert swr change to avoid breaking scons build
(https://travis-ci.org/anholt/mesa/jobs/419739857)
v3: Rebase on 3 new gallium caps.
Reviewed-by: Marek Olšák <marek.olsak@amd.com> (v1)
Cc: Bruce Cherniak <bruce.cherniak@intel.com>
Cc: George Kyriazis <george.kyriazis@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
As of 07a2098a70, brw_nir_optimize calls nir_remove_dead_variables as
the last optimization. Doing it again is just pointless.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
We're hitting an assert in gfxbench because one of the local variable
is a sampler (according to Jason this isn't valid) :
testfw_app: ../src/compiler/nir_types.cpp:551: void glsl_get_natural_size_align_bytes(const glsl_type*, unsigned int*, unsigned int*): Assertion `!"type does not have a natural size"' failed.
Since this particular variable isn't used, it can be eliminated by
removing unused local variables at the end of the optimization loop.
This makes sense also for valid local variables.
v2: Move additional local variable removal out of optimization loop,
but before large constant removal (Jason/Lionel)
v3: Move the removal at the end of brw_nir_optimize()
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107806
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The "gen_group_get_length" function can return a negative value
and it can lead to the out of bounds group_iter.
v2: printing of "unknown command type" was added
v3: just the asserts are added
Signed-off-by: Andrii Simiklit <andrii.simiklit@globallogic.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
ac_surface.c: gfx6_compute_surface says
/* DB doesn't support linear layouts. */
Now if we expose linear depth and create a linear depth image
and use CmdCopyImage to copy into it, we can't map the underlying
memory and read it linearly which I think should work.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Amber Lake uses the same gen graphics as Kaby Lake, including a id
that were previously marked as reserved on Kaby Lake, but that
now is moved to AML page.
This follows the ids and approach used on kernel's commit
e364672477a1 ("drm/i915/aml: Introducing Amber Lake platform")
Reported-by: Timo Aaltonen <timo.aaltonen@canonical.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Anuj Phogat <anuj.phogat@gmail.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
According to internal docs, some gen9 platforms have a pixel shader push
constant synchronization issue. Although not listed among said
platforms, this issue seems to be present on the GeminiLake 2x6's we've
tested.
We consider the available workarounds to be too detrimental on
performance. Instead, we mitigate the issue by applying part of one of
the workarounds. Re-emit PUSH_CONSTANT_ALLOC at the top of every batch
(as suggested by Ken).
Fixes ext_framebuffer_multisample-accuracy piglit test failures with the
following options:
* 6 depth_draw small depthstencil
* 8 stencil_draw small depthstencil
* 6 stencil_draw small depthstencil
* 8 depth_resolve small
* 6 stencil_resolve small depthstencil
* 4 stencil_draw small depthstencil
* 16 stencil_draw small depthstencil
* 16 depth_draw small depthstencil
* 2 stencil_resolve small depthstencil
* 6 stencil_draw small
* all_samples stencil_draw small
* 2 depth_draw small depthstencil
* all_samples depth_draw small depthstencil
* all_samples stencil_resolve small
* 4 depth_draw small depthstencil
* all_samples depth_draw small
* all_samples stencil_draw small depthstencil
* 4 stencil_resolve small depthstencil
* 4 depth_resolve small depthstencil
* all_samples stencil_resolve small depthstencil
v2: Include more platforms in WA (Ken).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106865
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93355
Cc: <mesa-stable@lists.freedesktop.org>
Tested-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Though the SARGB8888 format is used internally through its FourCC value,
it is not a real format as defined by drm_fourcc.h; it cannot be used
with KMS or other interfaces expecting drm_fourcc.h format codes.
Ensure we don't advertise it through the dmabuf format/modifier query
interfaces, preventing us from tripping over an assert.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Michel Dänzer <michel.daenzer@amd.com>
Fixes: 8c1b9882b2 ("egl/dri2: Guard against invalid fourcc formats")
Acked-by: Jason Ekstrand <jason.ekstrand@intel.com>
CTS doesn't test input clip/cull distances for the fragment
shader stage, which explains why this was totally broken. I
wrote a simple test locally that works now.
This fixes a crash with GTA V and DXVK.
Note that we are exporting unused parameters from the vertex
shader now, but this can't be optimized easily because we don't
keep the fragment shader info...
Cc: mesa-stable@lists.freedesktop.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107477
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
If color buffer is locked, do not set its wayland buffer to NULL;
otherwise it can not be freed later.
Rather, flag it in order to destroy it later on the release event.
v2: instruct release event to unlock only or free wl_buffer too (Daniel)
This also fixes dEQP-EGL.functional.swap_buffers_with_damage.* tests.
CC: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Daniel Stone <daniels@collabora.com>
While adding transfer queues to radv, I started writing some tests,
the first test I wrote fell over copying a buffer larger than this
limit.
Checked AMDVLK and found the correct limit.
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This fixes:
tests/spec/arb_enhanced_layouts/execution/component-layout/vs-fs-array-dvec3.shader_test
since I reworked the 64-bit swizzles.
Fixes: bb17ae49ee (gallivm: allow to pass two swizzles into fetches.)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
I have piglit results from my machine, but I must have messed up,
and not built mesa in between properly.
Fixes: bb17ae49ee (gallivm: allow to pass two swizzles into fetches.)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This reverts commit f8cfc77660.
This appears to break intel_dump_gpu for Gen9 systems - I can load them
in the simulator, but nothing happens. Reverting the patch makes the
simulator properly execute our commands and shaders again.
This fixes the GL_ARB_fragment_shader_interlock piglit test on gen8
platforms where the lack of metadata dirtying was causing another pass
to accidentally delete a much needed loop.
https://bugs.freedesktop.org/show_bug.cgi?id=107745
Fixes: 37f7983bcc "intel/compiler: Do image load/store lowering..."
Jason Ekstrand <jason@jlekstrand.net> writes:
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
This effectively reverts a266934935 which
was a misguided attempt at protecting intel_query_dma_buf_modifiers from
invalid formats. Unfortunately, in some internal EGL cases, we can get
an SRGB format validly in this function. Rejecting such formats caused
us to not allow CCS in some cases where we should have been allowing it.
This regressed the performance of some SynMark tests as well as GfxBench
ALU2, Tessellation and Manhattan 3.0 tests
There's some question of whether or not we really should be using SRGB
"fourcc" formats that aren't actually in drm_foucc.h but there's not
much harm in allowing them through here.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107223
Fixes: a266934935 "i965/screen: Return false for unsupported..."
Tested-By: Eero Tamminen <eero.t.tamminen@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
We already reject attempts to import images with invalid fourcc formats
but don't really guard the queries all that well. This makes us error
out in any calls to eglQueryDmaBufModifiersEXT if the given format is
not a valid fourcc format. We also add an assert to ensure that drivers
don't advertise any non-fourcc formats.
Cc: mesa-stable@lists.freedesktop.org
Tested-By: Eero Tamminen <eero.t.tamminen@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Now that image load/store intrinsics are variable-width, we need to set
num_components accordingly. In 15d39f474b, both glsl_to_nir and
spirv_to_nir were updated to properly set num_components but radv meta
was left behind.
Fixes: 15d39f474b "nir: Make image load/store intrinsics..."
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Previously gallivm would attempt to use VSX instructions on all systems
where it detected that Altivec is supported; however, VSX was added to
POWER long after Altivec, causing lots of crashes on older POWER/PPC
hardware, e.g. PPC Macs. By detecting VSX separately from Altivec we can
automatically disable it on hardware that supports Altivec but not VSX
Signed-off-by: Vicki Pfau <vi@endrift.com>
Passes the compat piglits. I'm sure that there will be odd issues that
aren't caught by them, but at least it should basically work.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
With compat creeping up to geometry and tess shaders, lowering texcoord
accesses/writes becomes more complicated. Since it's an optimization
anyways, just avoid the complication for now.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
The spec seems clear this is not allowed but the Nvidia binary
forces apps to add layout qualifiers so this works around the
issue for No Mans Sky until the CTS can be sorted out.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The spec is quite clear this is not allowed:
From Section 4.4. (Layout Qualifiers) of the GLSL 4.60 spec:
"Layout qualifiers can appear in several forms of declaration.
They can appear as part of an interface block definition or
block member, as shown in the grammar in the previous section.
They can also appear with just an interface-qualifier to establish
layouts of other declarations made with that qualifier:
layout-qualifier interface-qualifier ;
Or, they can appear with an individual variable declared with
an interface qualifier:
layout-qualifier interface-qualifier declaration ;"
From Section 4.10 (Memory Qualifiers) of the GLSL 4.60 spec:
"Layout qualifiers cannot be used on formal function parameters,
and layout qualification is not included in parameter matching."
However on the Nvidia binary driver they actually fail to compile
if image function params don't have a layout qualifier. This results
in applications such as No Mans Sky using layout qualifiers on params.
I've submitted a CTS test to expose this problem in the Nvidia driver
but until that is resolved this patch will help Mesa drivers work
around the issue.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This fixes compilation of some "No Mans Sky" shaders where the stringification
happens in branches intended for DX12.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This hijacks the top 16-bits of swizzle, to pass in the swizzle
for the second channel.
This fixes handling .yx swizzles of 64-bit values.
This should fixup radeonsi and llvmpipe.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107524
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We could enable it for lower versions of GL but this allows us
to just use the existing version/extension checks that are already
used by the core profile.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Now that the drivers are lowering to surface indices themselves, we no
longer need to push the surface index into the shader.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously, the back-end compiler turn image access into magic uniform
reads and there was a complex contract between back-end compiler and
driver about setting up and filling out those params. As of this
commit, both drivers now lower image_deref_load_param_intel intrinsics
to load_uniform intrinsics controlled by the driver and lower the other
image_deref_* intrinsics to image_* intrinsics which take an actual
binding table index. There are still "magic" uniforms but they are now
added and controlled entirely by the driver and that contract no longer
spans components.
This also has the side-effect of making most image use compile-time
binding table indices. Previously, all image access pulled the binding
table index from a uniform. Part of the reason for this was that the
magic uniforms made it difficult to decouple binding table indices from
the uniforms and, since they are indexed completely differently
(especially in Vulkan), it was hard to pull them apart. Now that the
driver is handling both, it's trivial to decouple the two and provide
actual binding table indices.
Shader-db results on Kaby Lake:
total instructions in shared programs: 15166872 -> 15164293 (-0.02%)
instructions in affected programs: 115834 -> 113255 (-2.23%)
helped: 191
HURT: 0
total cycles in shared programs: 571311495 -> 571196465 (-0.02%)
cycles in affected programs: 4757115 -> 4642085 (-2.42%)
helped: 73
HURT: 67
total spills in shared programs: 10951 -> 10926 (-0.23%)
spills in affected programs: 742 -> 717 (-3.37%)
helped: 7
HURT: 0
total fills in shared programs: 22226 -> 22201 (-0.11%)
fills in affected programs: 1146 -> 1121 (-2.18%)
helped: 7
HURT: 0
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This commit expands the current memory access enum to contain the extra
two bits provided for images. We choose to follow the SPIR-V convention
of NonReadable and NonWriteable because readonly implies that you *can*
read so readonly + writeonly doesn't make as much sense as NonReadable +
NonWriteable.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The GLSL spec allows you to set both the "readonly" and "writeonly"
qualifiers on images to indicate that it can only be used with
imageSize. However, we had no way of representing this int he linked
shader and flagged it as GL_READ_ONLY. This is good from a "does it use
this buffer?" perspective but not from a format and access lowering
perspective. By using GL_NONE for if "readonly" and "writeonly" are
both set, we can detect this case in the driver and handle it correctly.
Nothing currently relies on the type of surface in the "readonly" +
"writeonly" case but that's about to change. i965 is the only drier
which uses the ImageAccess field and gl_bindless_image::access is
currently unused.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Having the array length component stored in .z was a small convenience
for the ISL image param filling code and an annoyance in the NIR
lowering code. The only convenience of treating 1D arrays like 2D
arrays in the lowering code is in the address calculation code so let's
put all the complexity there as well.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This commit moves our storage image format conversion codegen into NIR
instead of doing it in the back-end. This has the advantage of letting
us run it through NIR's optimizer which is pretty effective at shrinking
things down. In the common case of rgba8, the number of instructions
emitted after NIR is done with it is half of what it was with the
lowering happening in the back-end. On the downside, the back-end's
lowering is able to directly use predicates and the NIR lowering has to
use IFs.
Shader-db results on Kaby Lake:
total instructions in shared programs: 15166910 -> 15166872 (<.01%)
instructions in affected programs: 5895 -> 5857 (-0.64%)
helped: 15
HURT: 0
Clearly, we don't have that much image_load_store happening in the
shaders in shader-db....
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Dead code will get rid of them eventually but it's better if they're
just gone so we guarantee they won't trip up later passes.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Instead of requiring 4 components, this allows them to potentially use
fewer. Both the SPIR-V and GLSL paths still generate vec4 intrinsics so
drivers which assume 4 components should be safe. However, we want to
be able to shrink them for i965.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We have a name for that, it's called a uvec. This just makes the
function name a bit shorter. While we're here, we also add an assert
for one of the assumptions this function makes.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
There is nothing inherent about these opcodes that requires them to only
take scalars. It's very convenient if we let them take vectors as well.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Found by inspection. This doesn't help much now but we'll see this
pattern with images if you load UNORM and then store UNORM.
Shader-db results on Kaby Lake:
total instructions in shared programs: 15166916 -> 15166910 (<.01%)
instructions in affected programs: 761 -> 755 (-0.79%)
helped: 6
HURT: 0
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This adds the "(a << N) >> M" family of mask or sign-extensions. Not a
huge win right now but this pattern will soon be generated by NIR format
lowering code.
Shader-db results on Kaby Lake:
total instructions in shared programs: 15166918 -> 15166916 (<.01%)
instructions in affected programs: 36 -> 34 (-5.56%)
helped: 2
HURT: 0
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
If it's not the right bit-size, it may not actually be the correct
extraction. For now, we'll only worry about 32-bit versions.
Fixes: 905ff86198 "nir: Recognize open-coded extract_u16"
Fixes: 76289fbfa8 "nir: Recognize open-coded extract_u8"
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Blending isn't valid for integer formats. Rather than having drivers
worry about this, just disable blending in this case. This hopefully
will increase hits in the CSO cache as well, by eliminating most of the
meaningless fields in this case.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This doesn't seem to make any difference in testing, but it fixes a
failed assertion when dumping sm3 shaders.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Setting GL_POINT_SPRITE_COORD_ORIGIN to GL_LOWER_LEFT did not work for
vgpu9. We can use the rasterizer sprite_coord_enable bitfield as-is.
We need to index into it using the TGSI semantic index, not the
register index.
This fixes the Piglit fbo-gl_pointcoord and glsl-fs-pointcoord tests.
Testing done: Piglit, Mesa sprite demos
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
The flag_rect and flag_buffer fields didn't sufficiently capture
the state changes needed for those resource types. For example,
if a texture binding was changed from a 500x500 rect texture to a
400x400 rect texture we didn't set SVGA_NEW_TEXTURE_CONSTS. But
we need to do that to emit the new texcoord scale factors to the
constant buffers. Rather than track the sizes of all bound
resources, just set the flag if the resource is a rect. Same
story with texture buffers.
Also, since rect/buffer textures are usable with VS/GS shaders,
add SVGA_NEW_TEXTURE_CONSTS to the flags we check for emitting
VS/GS constants.
This seems to help with XFCE / xfwm4 desktop scaling.
VMware issue 2156696.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Add const qualifiers. Add 'f' suffix on floats to avoid double
promotion.
Remove unneeded shader type assertion since the switch statement
handled it already.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Move this now-unused function into the existing comment block, which was its only prior use.
../../../../../src/gallium/drivers/nouveau/codegen/nv50_ir_from_tgsi.cpp:2645:1: warning:
unused function 'partitionLoadStore' [-Wunused-function]
partitionLoadStore(uint8_t comp[2], uint8_t size[2], uint8_t mask)
Fixes: ("86e4440361 nouveau: codegen: Disable more old resource handling code")
Signed-off-by: Rhys Kidd <rhyskidd@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Newer blit tests are enabling depth&stencils blits. We currently don't
support it but can do by iterating over the aspects masks (copy some
logic from the CopyImage function).
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 9f44745eca ("anv: Use blorp to implement VkBlitImage")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This adds support for unrolling the classic
do {
// ...
} while (false)
that is used to wrap multi-line macros. GLSL IR also wraps switch
statements in a loop like this.
shader-db results IVB:
total loops in shared programs: 2515 -> 2512 (-0.12%)
loops in affected programs: 33 -> 30 (-9.09%)
helped: 3
HURT: 0
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Now that SSA values can be derefs and they have special rules, we have
to be a bit more careful about our LCSSA phis. In particular, we need
to clean up in case LCSSA ended up creating a phi node for a deref.
This avoids validation issues with some CTS tests with the following
patch, but its possible this we could also see the same problem with
the existing unrolling passes.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
In order to be sure loop_terminator_list is an accurate
representation of all the jumps in the loop we need to be sure we
didn't encounter any other complex behaviour such as continues,
nested breaks, etc during analysis.
This will be used in the following patch.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This will help later patches with unrolling loops that end with a
break i.e. loops the always exit on their first interation.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
All of the other brw_*_desc functions take a devinfo parameter, and all
of the others at least have an assert that uses it. Keep the parameter,
but mark it as unused.
Silences 37 warnings like:
In file included from src/intel/common/gen_disasm.c:27:0:
src/intel/compiler/brw_eu.h: In function ‘brw_pixel_interp_desc’:
src/intel/compiler/brw_eu.h:377:53: warning: unused parameter ‘devinfo’ [-Wunused-parameter]
brw_pixel_interp_desc(const struct gen_device_info *devinfo,
^~~~~~~
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Gen >= 9 have ability to control clamping of depth values separately at
near and far plane.
z_w is clamped to the range [min(n,f), 0] if clamping at near plane is
enabled, [0, max(n,f)] if clamping at far plane is enabled and [min(n,f)
max(n,f)] if clamping at both plane is enabled.
v2: 1) Use better coding style (Ian Romanick)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
_mesa_set_enable() and _mesa_IsEnabled() extended to accept new two
tokens GL_DEPTH_CLAMP_NEAR_AMD and GL_DEPTH_CLAMP_FAR_AMD.
v2: Remove unnecessary parentheses (Marek Olsak)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Enable _mesa_PushAttrib() and _mesa_PopAttrib() to handle
GL_DEPTH_CLAMP_NEAR_AMD and GL_DEPTH_CLAMP_FAR_AMD tokens.
Remove DepthClamp, because DepthClampNear + DepthClampFar replaces it,
as suggested by Marek Olsak.
Driver that enables AMD_depth_clamp_separate will only ever look at
DepthClampNear and DepthClampFar, as suggested by Ian Romanick.
v2: 1) Remove unnecessary parentheses (Marek Olsak)
2) if AMD_depth_clamp_separate is unsupported, TEST_AND_UPDATE
GL_DEPTH_CLAMP only (Marek Olsak)
3) Clamp against near and far plane separately (Marek Olsak)
4) Clip point separately for near and far Z clipping plane (Marek
Olsak)
v3: Clamp raster position zw to the range [min(n,f), 0] for near plane
and [0, max(n,f)] for far plane (Marek Olsak)
v4: Use MIN2 and MAX2 instead of CLAMP (Marek Olsak)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Add some basic types and storage for the AMD_depth_clamp_separate
extension.
v2: 1) Drop unnecessary definition (Marek Olsak)
2) Expose extension in compatibility profile (Marek Olsak)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Currently we run the script but don't actually load any files, even in a
tarball where they exist.
Fixes: 3218056e0e
("meson: Build i965 and dri stack")
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Adds suppport for INTEL_fragment_shader_ordering. We achieve
the fragment ordering by using the same instruction as for
beginInvocationInterlockARB() which is by issuing a memory
fence via sendc.
Signed-off-by: Kevin Rogovin <kevin.rogovin@intel.com>
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>
This extension provides new GLSL built-in function
beginFragmentShaderOrderingIntel() that guarantees
(taking wording of GL_INTEL_fragment_shader_ordering
extension) that any memory transactions issued by
shader invocations from previous primitives mapped to
same xy window coordinates (and same sample when
per-sample shading is active), complete and are visible
to the shader invocation that called
beginFragmentShaderOrderingINTEL().
One advantage of INTEL_fragment_shader_ordering over
ARB_fragment_shader_interlock is that it provides a
function that operates as a memory barrie (instead
of a defining a critcial section) that can be called
under arbitary control flow from any function (in
contrast the begin/end of ARB_fragment_shader_interlock
may only be called once, from main(), under no control
flow.
Signed-off-by: Kevin Rogovin <kevin.rogovin@intel.com>
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>
When the SVBI Payload Enable is false I guess the register R1.4
which contains the Maximum Streamed Vertex Buffer Index is filled by zero
and GS stops to write transform feedback when the transform feedback
is not active.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107579
Signed-off-by: Andrii Simiklit <andrii.simiklit@globallogic.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
This adds an environment-varaible that can be used for driver-specific
flags, as well as a flag for it to enable verbose output.
While we're at it, quiet some overly chatty debug-output by default.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
This is the only direct call-site for fprintf in virgl; all other
call-sites call debug_printf instead. So let's follow in style here.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
INTEL_DEBUG=hex prints 32 bit hex value and due to endianness of CPU
byte order is reversed. In order to disassemble binary files, print
each byte instead of 32 bit hex value.
v2: Print blank spaces in order to vertically align output of compacted
instructions hex value with uncompacted instructions hex value.
(Matt Turner)
v3: Fix line wrap at correct length
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Gives a +7.79% increase in FPS with Hitman on lowest quality settings on
my GTX 1060.
total instructions in shared programs : 5787979 -> 5748677 (-0.68%)
total gprs used in shared programs : 669901 -> 669373 (-0.08%)
total shared used in shared programs : 548832 -> 548832 (0.00%)
total local used in shared programs : 21068 -> 21064 (-0.02%)
local shared gpr inst bytes
helped 1 0 152 274 274
hurt 0 0 0 0 0
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Rather than the usual three that would be created.
total instructions in shared programs : 5796385 -> 5786560 (-0.17%)
total gprs used in shared programs : 670103 -> 669968 (-0.02%)
total shared used in shared programs : 548832 -> 548832 (0.00%)
total local used in shared programs : 21164 -> 21068 (-0.45%)
local shared gpr inst bytes
helped 1 0 64 1040 1040
hurt 0 0 27 0 0
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
total instructions in shared programs : 5819319 -> 5796385 (-0.39%)
total gprs used in shared programs : 670571 -> 670103 (-0.07%)
total shared used in shared programs : 548832 -> 548832 (0.00%)
total local used in shared programs : 21164 -> 21164 (0.00%)
local shared gpr inst bytes
helped 0 0 318 1758 1758
hurt 0 0 63 0 0
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
With this commit, OP_MAD is handled on nv50 too. This commit is also
useful for later commits.
Also, instead of creating a shladd, it relies on LateAlgebraicOpt to
create one. This simplifies the code and helps shader-db slightly overall.
total instructions in shared programs : 5820882 -> 5819319 (-0.03%)
total gprs used in shared programs : 670595 -> 670571 (-0.00%)
total shared used in shared programs : 548832 -> 548832 (0.00%)
total local used in shared programs : 21164 -> 21164 (0.00%)
local shared gpr inst bytes
helped 0 0 18 230 230
hurt 0 0 8 263 263
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
This hits the shader-db numbers a good bit, though a few xmads is way
faster than an imul or imad and the cost is mitigated by the next commit,
which optimizes many multiplications by immediates into shorter and less
register heavy instructions than the xmads.
total instructions in shared programs : 5768871 -> 5820882 (0.90%)
total gprs used in shared programs : 669919 -> 670595 (0.10%)
total shared used in shared programs : 548832 -> 548832 (0.00%)
total local used in shared programs : 21068 -> 21164 (0.46%)
local shared gpr inst bytes
helped 0 0 38 0 0
hurt 1 0 365 3076 3076
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
v4: make the immediate field 16 bits
v5: don't ever emit h1 flags for immediates
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
v4: remove uint16_t(...)
v4: don't allow immediates outside [0,65535] in insnCanLoad()
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
>From Section 4.3.4 (Inputs) of the GLSL 1.50 spec:
"Only the input variables that are actually read need to be written
by the previous stage; it is allowed to have superfluous
declarations of input variables."
Fixes:
* interstage-multiple-shader-objects.shader_test
v2:
Update comment in ir.h since the usage of "used" field
has been extended.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101247
Signed-off-by: Vadym Shovkoplias <vadym.shovkoplias@globallogic.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
VkPhysicalDeviceProtectedMemoryProperties structure is new on Vulkan 1.1.
Fixes Vulkan CTS CL#2849.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
The recent commit 4616639b49 introduced
the new function aubinator_error() which is a trivial wrapper around
fprintf() to STDERR. The call to fprintf() however is passed the message
msg directly:
fprintf(stderr, msg);
This is a format-security violation and leads to an FTBFS with
-Werror=format-security (GCC 8):
../../../src/intel/tools/aubinator.c: In function 'aubinator_error':
../../../src/intel/tools/aubinator.c:74:4: error: format not a string literal and no format arguments [-Werror=format-security]
fprintf(stderr, msg);
^~~~~~~
This patch fixes this trivially by introducing a catch-all "%s" format
argument.
Fixes: 4616639b49 ("intel: tools: split aub parsing from aubinator")
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Instead of printing addresses like everyone else, we were accidentally
printing the offset from state base address. Also, state_map is a void
pointer so we were incrementing in bytes instead of dwords and every
state other than the first was wrong.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
First of all, setting iter->name in advance_field is unnecessary because
it gets set by gen_decode_field which gets called immediately after
gen_decode_field in the one call-site. Second, we weren't properly
initializing start_bit and end_bit in the initial condition of
gen_field_iterator_next so the first field of a struct would get printed
wrong if it doesn't start on the first bit. This is fixed by adding a
iter_start_field helper which sets the field and also sets up the other
bits we need. This fixes decoding of 3DSTATE_SBE_SWIZ.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Some hardware can do PIPE_TEX_WRAP_MIRROR_REPEAT but not
PIPE_TEX_WRAP_MIRROR_CLAMP and PIPE_TEX_WRAP_MIRROR_CLAMP_TO_BORDER.
Drivers for such hardware would like to advertise support for
ARB_texture_mirror_clamp_to_edge but not EXT_texture_mirror_clamp.
This commit adds a new PIPE_CAP_TEXTURE_MIRROR_CLAMP_TO_EDGE bit,
changes the extension enable to be based on that, and enables it
in all upstream drivers which supported PIPE_CAP_TEXTURE_MIRROR_CLAMP
(so they continue supporting this mode).
The batch decoder looks for a field with a particular name to decide
whether an MI_BB_START leads into a second batch buffer level. Because
the names are different between Gen7.5/8 and the newer generation we
fail that test and keep on reading (invalid) instructions.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107544
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Currently droid_probe_device, does not do any 'probing' but filtering
out a device if it doesn't match the vendor string given.
Rename the function, straighten the return type and call it only as
needed - an actual vendor string is provided.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
The function name is misleading - it effectively checks if
loader_get_driver_for_fd fails. Which can happen only only on strdup
error - a close to impossible scenario.
Drop the function - we call the loader API at at later stage.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
The name string is guaranteed to be NULL terminated. Drop the explicit
length check that comes with strncmp().
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Replace the manual handling of /dev/dri in favor of the drmDevice API.
The latter provides a consistent way of enumerating the devices,
providing device details as needed.
v2:
- Use ARRAY_SIZE (Frank)
- s/famour/favor/ typo (Frank)
- Make MAX_DRM_DEVICES a macro - fix vla errors (RobF)
- Remove left-over dev_path instance (RobF)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Robert Foss <robert.foss@collabora.com> (v1)
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
This reverts commit ae7898dfdb.
Turns out the python scripts are _not_ fully python 3 compatible.
As Ilia reported using get_xmlpool.py with LANG=C produces some weird
output - see the link for details.
Even though the issue was spotted with the autoconf build, it exposes a
genuine problem with the script (and lack of lang handling of the meson
build.)
https://lists.freedesktop.org/archives/mesa-dev/2018-August/203508.html
This reverts commit 855af9a5a2.
Turns out the python scripts are _not_ fully python 3 compatible.
As Ilia reported using get_xmlpool.py with LANG=C produces some weird
output - see the link for details.
Even though the issue was spotted with the autoconf build, it exposes a
genuine problem with the script (and lack of lang handling of the meson
build.)
https://lists.freedesktop.org/archives/mesa-dev/2018-August/203508.html
This reverts commit 095515e16c.
This breaks KHR-GL46.map_buffer_alignment.functional on i965.
This code was apparently not reviewed and I don't know why we would
move from a driver configurable constant to a hardcoded value for all
drivers. This really looks like an accidental hack push.
As far as I can tell, no one reviewed these changes, they made i965
assert fail on driver load, and I am not certain they are correct.
(Hopefully reverting these does not break radeonsi too badly...)
The uniform related changes seem fine and reasonable, but the texture
image units change is possibly incorrect. According to the
OES_tessellation_shader spec issue 5:
(5) How are aggregate shader limits computed?
RESOLVED: Following the GL 4.4 model, but we restrict uniform
buffer bindings to 12/stage instead of 14, this results in
MAX_UNIFORM_BUFFER_BINDINGS = 72
This is 12 bindings/stage * 6 shader stages, allowing a static
partitioning of the bindings even though at most 5 stages can
appear in a program object).
MAX_COMBINED_UNIFORM_BLOCKS = 60
This is 12 blocks/stage * 5 stages, since compute shaders can't
be mixed with other stages.
MAX_COMBINED_TEXTURE_IMAGE_UNITS = 96
This is 16 textures/stage * 6 stages.
which definitely is including compute shaders in that last limit.
Not including compute shaders breaks the following test:
dEQP-GLES31.functional.state_query.integer.max_combined_texture_image_units_getinteger
There was enough breakage that I figured we should just send this back
to the drawing board.
Revert "i965: don't include compute resources in "Combined" limits"
Revert "st/mesa: don't include compute resources in "Combined" limits"
Revert "mesa: don't include compute resources in MAX_COMBINED_* limits"
This reverts commit b03dcb1e5f.
This reverts commit cff290df4c.
This reverts commit 45f87a48f9.
These have been removed. Unfortunately auto-upgrade doesn't work for
jit. (Worse, it seems we don't get a compilation error anymore when
compiling the shader, rather llvm will just do a call to a null
function in the jitted shaders making it difficult to detect when
intrinsics vanish.)
Luckily the signed ones are still there, I helped convincing llvm
removing them is a bad idea for now, since while the unsigned ones have
sort of agreed-upon simplest patterns to replace them with, this is not
the case for the signed ones, and they require _significantly_ more
complex patterns - to the point that the recognition is IMHO probably
unlikely to ever work reliably in practice (due to other optimizations
interfering). (Even for the relatively trivial unsigned patterns, llvm
already added test cases where recognition doesn't work, unsaturated
add followed by saturated add may produce atrocious code.)
Nevertheless, it seems there's a serious quest to squash all
cpu-specific intrinsics going on, so I'd expect patches to nuke them as
well to resurface.
Adapt the existing fallback code to match the simple patterns llvm uses
and hope for the best. I've verified with lp_test_blend that it does
produce the expected saturated assembly instructions. Though our
cmp/select build helpers don't use boolean masks, but it doesn't seem
to interfere with llvm's ability to recognize the pattern.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106231
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
because the closed driver exposes it.
It's equivalent to ARB_gpu_shader_int64.
In this patch, I did everything the same as we do for ARB_gpu_shader_int64.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
We have to be a bit careful with this one because we want it to run in
the optimization loop but only in the first brw_nir_optimize call.
Later calls assume that we've lowered away copy_deref instructions and
we don't want to introduce any more.
Shader-db results on Kaby Lake:
total instructions in shared programs: 15176942 -> 15176942 (0.00%)
instructions in affected programs: 0 -> 0
helped: 0
HURT: 0
In spite of the lack of any shader-db improvement, this patch completely
eliminates spilling in the Batman: Arkham City tessellation shaders.
This is because we are now able to detect that the temporary array
created by DXVK for storing TCS inputs is a copy of the input arrays and
use indirect URB reads instead of making a copy of 4.5 KiB of input data
and then indirecting on it with if-ladders.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
This peephole optimization looks for a series of load/store_deref or
copy_deref instructions that copy an array from one variable to another
and turns it into a copy_deref that copies the entire array. The
pattern it looks for is extremely specific but it's good enough to pick
up on the input array copies in DXVK and should also be able to pick up
the sequence generated by spirv_to_nir for a OpLoad of a large composite
followed by OpStore. It can always be improved later if needed.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Shader-db results on Kaby Lake:
total instructions in shared programs: 15177605 -> 15176765 (<.01%)
instructions in affected programs: 4259 -> 3419 (-19.72%)
helped: 1
HURT: 0
total spills in shared programs: 10954 -> 10855 (-0.90%)
spills in affected programs: 295 -> 196 (-33.56%)
helped: 1
HURT: 0
total fills in shared programs: 22222 -> 22117 (-0.47%)
fills in affected programs: 417 -> 312 (-25.18%)
helped: 1
HURT: 0
The helped shader is from the OglCSDof synmark test. On my Kaby Lake
laptop, the actual framerate of the benchmark didn't appear to improve
beyond the noise.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
This pass looks for variables with vector or array-of-vector types and
narrows the type to only the components used.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
We call structure splitting once because it is guaranteed to split all
the structures in the entire shader in one go. We call array splitting
in the loop in case future optimizations turn indirects into direct
dereferences and we can split more arrays.
Shader-db results on Kaby Lake:
total instructions in shared programs: 15177605 -> 15177605 (0.00%)
instructions in affected programs: 0 -> 0
helped: 0
HURT: 0
This is unsurprising because nir_lower_vars_to_ssa already effectively
does structure and array splitting internally. It doesn't actually
split the variables but it's ability to reason about aliasing in the
presence of arrays and structures and pick out scalars or vectors to be
lowered to SSA values is fairly advanced.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
This pass looks for array variables where at least one level of the
array is never indirected and splits it into multiple smaller variables.
This pass doesn't really do much now because nir_lower_vars_to_ssa can
already see through arrays of arrays and can detect indirects on just
one level or even see that arr[i][0][5] does not alias arr[i][1][j].
This pass exists to help other passes more easily see through arrays of
arrays. If a back-end does implement arrays using scratch or indirects
on registers, having more smaller arrays is likely to have better memory
efficiency.
v2 (Jason Ekstrand):
- Better comments and naming (some from Caio)
- Rework to use one hash map instead of two
v2.1 (Jason Ekstrand):
- Fix a couple of bugs that were added in the rework including one
which basically prevented it from running
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
This pass doesn't really do much now because nir_lower_vars_to_ssa can
already see through structures and considers them to be "split". This
pass exists to help other passes more easily see through structure
variables. If a back-end does implement arrays using scratch or
indirects on registers, having more smaller arrays is likely to have
better memory efficiency.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
The combined limits should only include shader stages that can be active
at the same time. We don't need to include compute.
See also cff290df4c for st/mesa.
Unbreaks i965 from assert failing on driver load since Marek's
45f87a48f9, which dropped the core
Mesa capabilities before adjusting driver limits down to match.
Same as the closed driver.
This causes a failure in GL45-CTS.compute_shader.max, which has a trivial
bug.
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
5 is the maximum number of shader stages that can be used by 1 execution
call at the same time (e.g. a draw call). The limit ensures that each
stage can use all of its binding points.
Compute is separate and doesn't need the 5x multiplier.
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
The extension was exposed but not the functions.
This fixes:
dEQP-GLES31.functional.debug.negative_coverage.get_error.buffer.readn_pixels
dEQP-GLES31.functional.debug.negative_coverage.get_error.state.get_nuniformfv
dEQP-GLES31.functional.debug.negative_coverage.get_error.state.get_nuniformiv
Cc: 18.1 18.2 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Pretty much all of the scripts are python2+3 compatible.
Check and allow using python3, while adjusting the PYTHON2 refs.
Note:
- python3.4 is used as it's the earliest supported version
- python3 chosen prior to python2
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
The script is executed explicitly via the build system, that uses
PYTHON/prog_python and equivalent.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
It will be ignored by x11_swapchain_result() anyway (because reaching
the `fail` label without setting `result` means the swapchain status was
already a hard error), but the compiler still complains about reading
uninitialised memory.
While at it, drop the unused assignment right before returning.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Single-sample color and single-sample depth (not stencil)
are coherent with shaders.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl
Since the script is never executed directly, but launched by Meson as an
argument to the Python interpreter, those are not needed any more.
In addition, they are the reason this script was missed when I moved the
Meson buildsystem to Python 3, so removing them helps avoiding future
confusion.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Just like the rest of the tree - these should be run either as part of
the build system check target, or at the very least with an explicitly
versioned python executable.
Fixes: db8cd8e367 ("glcpp/tests: Convert shell scripts to a python script")
Fixes: 97c28cb082 ("glsl/tests: Convert optimization-test.sh to pure python")
Fixes: 3b52d29227 ("glsl/tests: reimplement warnings-test in python")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Handling the version comparison by hand is a bad idea. Python has a handy
module distutils for that - use it.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Currently we use AC_CHECK_PROGS looking for python2.7, python2 and
finally python. That is due to the varying names used across the
different OS.
Use the handy AM_PATH_PYTHON which finds the correct name and checks for
the version.
Note: python2.7 has been an unofficial requirement for quite some time.
Update the docs to reflect that.
Cc: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
This is a strictly alphabetic sort, as is done in extensions_table.h
There are other options. We should pick one and document it. Right
now, this file is chaos.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
v2: Split changes to the message type field to another patch. Suggested
by Caio.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
This is necessary for a new Gen9 message type that will be added in the
next patch. There are also Gen8 message types that need the extra bit
(mostly for bindless).
v2: Split off from the next patch. Suggested by Caio.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
v2: Describe interactions with the capabilities added by
SPV_INTEL_shader_atomic_float_minmax
v3: Remove 64-bit float support.
v4: Explain NaN issues. Explain issues with atomicMin(-0, +0) and
atomicMax(-0, +0).
v5: Fix whitespace issues noticed by Caio.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Haven't tested this, but we do include loader.h
in platform_android.c
Fixes: c5ec155685 ("meson: wire up egl/android")
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Since there's no particular reason for the index to be 0, choose an
index that is not used by other block. This is convenient when we
store "per-block" data in an array AND look for the successors
data (e.g. any kind of backwards data-flow analysis).
v2: Add a note about end_block's index. (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Deref paths may share the same deref instructions in their chains,
e.g.
ssa_100 = deref_var A
ssa_101 = deref_struct "array_field" of ssa_100
ssa_102 = deref_array "[1]" of ssa_101
ssa_103 = deref_struct "field_a" of ssa_102
ssa_104 = deref_struct "field_a" of ssa_103
when comparing the two last deref instructions, their paths will share
a common sequence ssa_100, ssa_101, ssa_102. This patch skips to next
iteration if the deref instructions are the same. Path[0] (the var)
is still handled specially, so in the case above, only ssa_101 and
ssa_102 will be skipped.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Without this patch mesa doesn't compile:
In file included from ../mesa-9999/src/amd/addrlib/addrinterface.cpp:39:
../mesa-9999/src/util/macros.h:29:10: fatal error: c99_compat.h: No such file or directory
#include "c99_compat.h"
^~~~~~~~~~~~~~
compilation terminated.
Fixes: 15ca5ce99a
("amd/addrlib: mark returnCode as MAYBE_UNUSED in")
Signed-off-by: Mariusz Ceier <mceier+mesa-dev@gmail.com>
Acked-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Currently if 64bit and 32bit programs are used interchangeably, radv
will keep overwriting the cache. Use separate cache files to avoid
that.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The bsr instruction modifies flags, so that needs to be indicated to the
compiler. No effect on generated code, but still needed for correctness.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Fix rendering issues on BDW and SKL.
Fixes: 0288fe8d04
("i965/miptree: Use the correct BLT pitch")
Fixes the following regressions seen
exclusively on SKL:
* KHR-GL46.texture_barrier_ARB.disjoint-texels
* KHR-GL46.texture_barrier_ARB.overlapping-texels
* KHR-GL46.texture_barrier.disjoint-texels
* KHR-GL46.texture_barrier.overlapping-texels
and both on BDW and SKL:
* GTF-GL46.gtf21.GL2FixedTests.buffer_corners.buffer_corners
* GTF-GL46.gtf21.GL2FixedTests.stencil_plane_corners.stencil_plane_corners
v2: Note the fixed tests (Andres).
Don't cause failures with multisampled buffers (Andres).
Don't hamper SKL GT4 (Ken).
v3: Fix the Fixes tag (Dylan).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107359
Cc: <mesa-stable@lists.freedesktop.org>
Tested-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Check the destination's row pitch against the BLT engine's row pitch
limitation as well.
Fixes: 0288fe8d04
("i965/miptree: Use the correct BLT pitch")
v2: Fix the Fixes tag (Dylan).
Check the destination row pitch (Chris).
Reported-by: Dylan Baker <dylan@pnwbakers.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
It looks like we can't rely on the simulator to always translate virtual
addresses to physical ones correctly. So let's use physical everywhere.
Since our current GGTT maps virtual to physical addresses in a 1:1 way,
no further changes are required.
Additionally, we have other address spaces not in use right now. So
let's make it easier to switch which one we are using but putting the
default one into the aub_file struct.
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Only used, when asserts are enabled.
Fixes an unused-but-set-variable warning with GCC 8:
../../../src/amd/addrlib/r800/egbaddrlib.cpp: In member function 'virtual long long unsigned int Addr::V1::EgBasedLib::HwlGetSizeAdjustmentMicroTiled(unsigned int, unsigned int, ADDR_SURFACE_FLAGS, unsigned int, unsigned int, unsigned int, unsigned int*, unsigned int*) const':
../../../src/amd/addrlib/r800/egbaddrlib.cpp:4111:13: warning: variable 'physicalSliceSize' set but not used [-Wunused-but-set-variable]
UINT_64 physicalSliceSize;
^~~~~~~~~~~~~~~~~
Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Only used, when asserts are enabled.
Fixes an unused-variable warning with GCC 8:
../../../src/amd/addrlib/r800/egbaddrlib.cpp: In member function 'int Addr::V1::EgBasedLib::SanityCheckMacroTiled(ADDR_TILEINFO*) const':
../../../src/amd/addrlib/r800/egbaddrlib.cpp:982:13: warning: unused variable 'numPipes' [-Wunused-variable]
UINT_32 numPipes = HwlGetPipes(pTileInfo);
^~~~~~~~
v2: Don't realign other variable definitions, to keep in line with file
style (Marek)
Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Only used, when asserts are enabled.
Fixes an unused-variable warning with GCC 8:
../../../src/amd/addrlib/gfx9/gfx9addrlib.cpp: In member function 'ADDR_E_RETURNCODE Addr::V2::Gfx9Lib::ComputeStereoInfo(const ADDR2_COMPUTE_SURFACE_INFO_INPUT*, ADDR2_COMPUTE_SURFACE_INFO_OUTPUT*, unsigned int*) const':
../../../src/amd/addrlib/gfx9/gfx9addrlib.cpp:3879:34: warning: unused variable 'pEqToCheck' [-Wunused-variable]
const ADDR_EQUATION *pEqToCheck = &m_equationTable[eqIndex];
^~~~~~~~~~
v2: Don't realign other variable definitions, to keep in line with file
style (Marek)
Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Only used, when asserts are enabled.
Fixes an unused-but-set-variable warning with GCC 8:
../../../src/amd/addrlib/gfx9/gfx9addrlib.cpp: In member function 'virtual ADDR_E_RETURNCODE Addr::V2::Gfx9Lib::HwlComputeBlock256Equation(AddrResourceType, AddrSwizzleMode, unsigned int, ADDR_EQUATION*) const':
../../../src/amd/addrlib/gfx9/gfx9addrlib.cpp:2473:15: warning: variable 'microBlockDim' set but not used [-Wunused-but-set-variable]
Dim2d microBlockDim = Block256_2d[elementBytesLog2];
^~~~~~~~~~~~~
Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Only used, when asserts are enabled.
Fixes an unused-but-set-variable warning with GCC 8:
../../../src/amd/addrlib/addrinterface.cpp: In function 'int ElemGetExportNorm(ADDR_HANDLE, const ELEM_GETEXPORTNORM_INPUT*)':
../../../src/amd/addrlib/addrinterface.cpp:835:23: warning: variable 'returnCode' set but not used [-Wunused-but-set-variable]
ADDR_E_RETURNCODE returnCode = ADDR_OK;
^~~~~~~~~~
Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This is available through a "Show URB" button on the 3DPRIMITIVE
instructions.
v2: Fix urb allocation end value in tooltip (Rafael)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
A graphical user interface version of aubinator.
Allows you to :
- simultaneously look at multiple points in the aub file (using all
the goodness of the existing decoding in aubinator)
- edit an aub file
v2: Switch from GLFW to GTK+3
v3: Fix warning when exiting
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Rafael Antognolli <rafael.antognolli@intel.com> (v1)
We want to add a new UI tool to decode aub files. This will use the
Dear ImGui library to render its interface. The build of this UI
toolkit is conditional to -Dwith_tools=intel-ui which superseeds
-Dwith_tools=intel.
The main way to use ImGui is to embed its source code at a particular
revision. Most embedding projects have to do a bit of integration
which is really specific to one's project. In our case the only
modification is to include libepoxy. We also choose to use Gtk+3 for
the window system integration. As oppose to the previous previous
version of this patch using GLFW, Gtk+ is able to handle X11/Wayland
session as well as property DPI scaling on retina monitors.
The import was done at this commit (https://github.com/ocornut/imgui) :
commit 6211f40f3d903dd9df961256e044029c49793aa3
Author: omar <omarcornut@gmail.com>
Date: Fri Jul 27 12:29:33 2018 +0200
Internals: Drag and Drop: default drop preview use a narrower clipping rectangle (no effect here, but other branches uses a narrow clipping rectangle that was too small so this is a fix for it) + Comments
v2: Switch from GLFW to GTK+ (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Rafael Antognolli <rafael.antognolli@intel.com>
When we map a PPGTT buffer into a continous address space of aubinator
to be able to inspect it, we currently add it to the list of BOs to
unmap once we're finished. An optimization we can apply it to look up
that list before trying to remap PPGTT buffers again (we already do
this for GGTT buffers).
We need to take some care before doing this because the list also
contains GGTT BOs. As GGTT & PPGTT are 2 different address spaces, we
can have matching addresses in both that point to different physical
locations.
This changes adds a flag on the elements of the list of mapped BOs to
differenciate between GGTT & PPGTT, which allows use to reuse that
list when looking up both address spaces.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
This will allow the aubinator viewer tool to modify the aub data that
was loaded at a particular gtt address.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
We are testing the behaviour of a tool, for different input files, each
one using a different newline sequence. ('\n' on UNIX, '\r\n' on
Windows, …)
Unfortunately, when opening a file in text mode, Python 3 will by
default enable the "universal newlines" mode, which means it replaces
all the known newline sequences by '\n'.
This (usually useful) behaviour breaks the tests, which are specifically
trying to handle files with newline sequences different from '\n'.
Disabling the universal newlines mode fixes the tests.
However, to keep the script compatible with both Python 2 and 3, we must
use the io.open() function instead of the open() builtin, as the latter
only knows about the `newline` argument on Python 3.
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Python 3 does not automatically convert from bytes to unicode strings
like Python 2 used to do.
This commit makes sure we pass unicode strings to difflib.unified_diff,
so that the script works on both Python 2 and 3.
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
v2: - explicitly decode the output of subprocesses
- handle bytes and string types consistently rather than relying on
python 2's coercion for bytes and ignoring them in python 3
v3: - explicitly set encode as well as decode
- python 2.7 and 3.x `bytes` instead of defining an alias
Reviewed-by: Mathieu Bridon <bochecha@daitauha.fr>
This extension can be supported on SKL+. With this patch,
all corresponding tests (6K+) in CTS can pass. No test fails.
I verified CTS with the command below:
deqp-vk --deqp-case=dEQP-VK.pipeline.sampler.view_type.*reduce*
v2: 1) support all depth formats, not depth-only formats, 2) fix
a wrong indention (Jason).
v3: fix a few nits (Lionel).
v4: fix failures in CI: disable sampler reduction when sampler
reduction mode is not specified via this extension (Lionel).
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
It fixes simulator warnings in vulkancts tests complaining about missing
support for headerless sampler messages for pre-emptable contexts.
Bit 5 in SAMPLER MODE register is newly introduced for ICLLP.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Gen 11 workarounds table #2056 WABTPPrefetchDisable suggests to
disable prefetching of binding tables for ICLLP A0 and B0
steppings. We have a similar patch for i965 driver in Mesa
commit a5889d70.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
It fixes simulator warnings in piglit tests complaining about missing
support for headerless sampler messages for pre-emptable contexts.
Bit 5 in SAMPLER MODE register is newly introduced for ICLLP.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
With the current code, we didn't do the space checks prior
to atomic counter setup emission, but we also didn't add
atomic counters to the space check so we could get a flush
later as well.
These flushes would be bad, and lead to problems with
parallel tests. We have to ensure the atomic counter copy in,
draw emits and counter copy out are kept in the same command
submission unit.
This reworks the code to drop some useless masks, make the
counting separate to the emits, and make the space checker
handle atomic counter space.
[airlied: want this in 18.2]
Fixes: 06993e4ee (r600: add support for hw atomic counters. (v3))
We need to handle the gaps in the streamout bindings on the guest
side and enable if it the host has the rest enabled.
Reviewed-by: Jakob Bornecrantz <jakob@collabora.com>
Testing:
- Manually tested a low-latency handwriting demo that toggles
EGL_RENDER_BUFFER. Toggling changed the display latency as expected.
Used Android on Chrome OS, Kabylake GT2.
- No change in dEQP-EGL.functional.* on Fedora 27, Wayland, Skylake
GT2. Used deqp at tag android-p-preview-5.
- No regressions in dEQP-EGL.functional.*, ran on Android on Chrome
OS, Kabylake GT2. Some dEQP-EGL.functional.mutable_render_buffer.*
test change from NotSupported to Pass.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Specifically, implement the extension DRI_MutableRenderBufferLoader.
However, the loader enables EGL_KHR_mutable_render_buffer only if the
DRI driver implements its half of the extension,
DRI_MutableRenderBufferDriver.
Testing:
- No change in dEQP-EGL.functional.* on Fedora 27, Wayland, Skylake
GT2. Used deqp at tag android-p-preview-5.
- No change in dEQP-EGL.functional.*, ran on Android on Chrome OS,
Kabylake GT2.
- Manually inspected Android apps on same Chrome OS device.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Use a helper to avoid the common issues of upcasting after the right shift
(losing the upper bits) and shifting signed values (sign gets shifted too).
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This file is regenerated at build time anyway, so this would just get
overwritten anyway. No reason to ship it in the tarball.
Fixes: 44df06211c "autotools: include git_sha1.h in dist tarball"
Fixes: 471f708ed6 "git_sha1: simplify logic"
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The git core.autocrlf setting defaults to true (ie, all text files get
checked out as CRLF on Windows), except on Appveyor where's set to
"input" (ie, all text files get checked out with the upstream
repository's line endings, which for us typically means LF.)
And this was masking on Appveyor a regression in gen_xmlpool.py
processing t_options.h with CRLF line endings.
This change makes core.autocrlf to be true, which would have enabled to
immediately catch the issue, as seen in
https://ci.appveyor.com/project/jrfonseca/mesa/build/51
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
This was added as a workaround for Heaven 3.0 but was later removed
by 5ead448719 to allow Heaven 4.0 to work correctly.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The main purpose for having NV_fragment_shader_interlock
extension is because that extension is also for GLES31 while
the ARB extension is for GL only.
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>
We could still have batches queued up to flush, so fd_context_destroy()
(which will kill and sync on the flush_queue) before deleting buffers
that might be referenced from fdN_gmem() from context of flush_queue.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Only used, when asserts are enabled.
Fixes an unused-variable warning with GCC 8:
../../../src/intel/common/gen_decoder.c: In function 'gen_spec_load':
../../../src/intel/common/gen_decoder.c:535:47: warning: variable 'total_length' set but not used [-Wunused-but-set-variable]
uint32_t text_offset = 0, text_length = 0, total_length;
^~~~~~~~~~~~
Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Only used, when asserts are enabled.
Fixes an unused-variable warning with GCC 8:
../../../src/intel/tools/aubinator.c: In function 'ensure_phys_mem':
../../../src/intel/tools/aubinator.c:209:11: warning: unused variable 'ftruncate_res' [-Wunused-variable]
int ftruncate_res = ftruncate(mem_fd, mem_fd_len += 4096);
^~~~~~~~~~~~~
Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Only used, when asserts are enabled.
Fixes an unused-but-set-variable warning with GCC 8:
../../../src/intel/tools/aubinator_error_decode.c: In function 'main':
../../../src/intel/tools/aubinator_error_decode.c:759:11: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
int ret;
^~~
Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This fixes a regression with some Unity demos. Not sure
what the root cause of the problem is, especially because
the driver doesn't perform any fast color clears. So, it
shouldn't be needed to decompress DCC. RadeonSI says that
the decompression is relatively cheap if the surface has
been decompressed already.
One possible improvement is to two use predicates, one for
DCC and one for FCE that could be cleared when DCC, FMASK
or CMASK are performed by the driver. That might skip some
unnecessary decompression passes (not DCC though).
Fixes: ff7daadca1 ("radv: enable/disable predication for the DCC decompression pass")
CC: 18.2 <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107563
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Patch implements common bits for EXT_surface_SMPTE2086_metadata
and EXT_surface_CTA861_3_metadata extensions by adding new required
attributes and eglQuerySurface + eglSurfaceAttrib changes.
Currently none of the drivers are utilizing this data but this patch
is enabler in getting there.
v2: don't enable extension globally, should be only enabled by
EGL drivers that can transfer metadata to the window system (Jason)
use EGLint instead of uint16_t (Eric)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Supresses a maybe-uninitialized warning with GCC 8.
Note: image_index should always be initialised due to the result check,
but the compiler doesn't see that.
Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Only used, when asserts are enabled.
Fixes an unused-variable warning with gcc-8:
../../../src/compiler/nir/nir_opt_if.c: In function 'opt_peel_loop_initial_if':
../../../src/compiler/nir/nir_opt_if.c:109:15: warning: unused variable 'prev_block' [-Wunused-variable]
nir_block *prev_block =
^~~~~~~~~~
Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Only used, when asserts are enabled.
Fixes an unused-variable warning with gcc-8:
../../../src/util/half_float.c: In function '_mesa_half_to_unorm8':
../../../src/util/half_float.c:189:14: warning: unused variable 's' [-Wunused-variable]
const int s = (val >> 15) & 0x1;
^
Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
For some reason wine will sometimes give us a windows style path
for an application. For example when running the 64bit version
of Rage wine gives a Unix style path, but when running the 32bit
version is gives a windows style path.
If we detect no '/' in the path at all it should be safe to
assume we have a wine application and instead look for a '\'.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
The innermost check was added to stop us from unrolling multiple
loops in a single pass, and to stop outer loops from unrolling.
When we successfully unroll a loop we need to run the analysis
pass again before deciding if we want to go ahead an unroll a
second loop.
However the logic was flawed because it never tried to unroll any
nested loops other than the first innermost loop it found.
If this innermost loop is not unrolled we end up skipping all
other nested loops.
This unrolls a loop in a Deus Ex: MD shader on ultra settings and
also unrolls a loop in a shader from the game Prey when running
on DXVK.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
At the moment, depending on pipe transfer flags, the dumb
buffer map address can end up at either kms_sw_dt->ro_mapped
or kms_sw_dt->mapped.
When it's time to unmap the dumb buffer, both locations get unmapped,
even though one is probably initialized to 0.
That leads to the code segment getting unmapped at runtime and
crashes when trying to call into unrelated code.
This commit addresses the problem by using MAP_FAILED instead of
NULL for ro_mapped and mapped when the dumb buffer is unmapped,
and only unmapping mapped addresses at unmap time.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107098
Signed-off-by: Ray Strode <rstrode@redhat.com>
Fixes: d891f28df9 ("gallium/winsys/kms: Fix possible leak in map/unmap.")
Cc: Lepton Wu <lepton@chromium.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
drirc implementation of MESA_LOADER_DRIVER_OVERRIDE which can be
used to override dri driver to load.
Usage:
override dri driver for device with spec kernel driver name:
<device kernel_driver="kernel_driver_name">
<option name="dri_driver" value="new_dri_driver" />
</device>
or
<device driver="loader" kernel_driver="kernel_driver_name">
<option name="dri_driver" value="new_dri_driver" />
</device>
v2:
add kernel_driver device attribute to specify kernel
driver name instead of reuse driver attribute
v3:
seperate loader_get_kernel_driver_name into another patch
seperate add kernel_driver attribute into another patch
Suggested-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
[v4 Emil: add HAVE_LIBDRM guard around __driConfigOptionsLoader and
loader_get_dri_config_driver]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Driver and application can put their drirc files in
${datadir}/drirc.d/ with name xxx.conf. Config files
will be read and applied in file name alphabetic order.
So there are three places for drirc listed in order:
1. /usr/share/drirc.d/
2. /etc/drirc
3. ~/.drirc
v4:
fix meson build
v3:
1. seperate driParseConfigFiles refine into another patch
2. fix entries[i] mem leak
v2:
drop /etc/drirc.d
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This allows us to use the link-optimized shader for determining binding
table layouts and, more importantly, URB layouts. For apps running on
DXVK, this is extremely important as DXVK likes to declare max-size
inputs and outputs and this lets is massively shrink our URB space
requirements.
VkPipeline-db results (Batman pipelines only) on KBL:
total instructions in shared programs: 820403 -> 790008 (-3.70%)
instructions in affected programs: 273759 -> 243364 (-11.10%)
helped: 622
HURT: 42
total spills in shared programs: 8449 -> 5212 (-38.31%)
spills in affected programs: 3427 -> 190 (-94.46%)
helped: 607
HURT: 2
total fills in shared programs: 11638 -> 6067 (-47.87%)
fills in affected programs: 5879 -> 308 (-94.76%)
helped: 606
HURT: 3
Looking at shaders by hand, it makes the URB between TCS and TES go from
containing 32 per-vertex varyings per tessellation shader pair to a more
reasonable 8-12. For a 3-vertex patch, that's at least half the URB
space no matter how big the patch section is.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
We want these to be set as close to the final compile as possible so
that they are guaranteed to happen after nir_shader_gather_info is
called. The next commit is going to move nir_shader_gather_info to
after the linking step which makes this necessary.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This commit makes three changes. One is to only walk the descriptors once
and set bind map sizes at the same time as filling out the entries. The
second is to make the pass additive so that we can put stuff in the bind
map before applying the pipeline layout. Third, we switch to using
designated initializers.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Because lower_ycbcr gets called before apply_pipeline_layout, the
indices are all logical and the binding layout HW size is actually too
big for the bounds check. We should just use the regular logical array
size instead.
Fixes: f3e91e78a3 "anv: add nir lowering pass for ycbcr textures"
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
In commit bd27203f4d we changed this to
open in binary mode, to then explicitly decode the lines with the right
encoding.
Unfortunately, that broke the build on Windows, where the template file
can have '\r\n' as line terminators: opening in binary mode would keep
those terminators and break the regexp.
We need to go back to text mode, where the "universal newlines" mode
takes care of this.
However, to fix the initial issue, let's specify the encoding explicitly
when opening the file, and make sure it is open in text mode, so we only
get unicode strings.
Reviewed-by: Jose Fonseca <jfonseca@vmware>
When the number of unique BO is 0, we optimize the list creation
by copying all buffers of the current CS directly into it. But
this is only valid if the CS doesn't have virtual buffers,
otherwise they are not added and hw might report VM faults.
This fixes VM faults with:
dEQP-VK.sparse_resources.image_sparse_binding.2d.rgba8ui.1024_128_1
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This adds a freedreno backend for the a6xx generation GPUs, which at
the time of this commit is about 98% GLES2 conformant. Much remains to
be done - both performance work and feature work towards more recent
GLES versions, but this is a good start.
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
less than 2.7 is not supported.
v2: - Remove check for python >= 2.0, since we've already enforced 2.7
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
This handy helper is nice for OSes that are not linux or BSD like (mac
and windows) as it knows how to find python3 in odd places.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
It's what autotools has required for a long time.
v3: - Use distutils.version.StrictVersion instead of comparing strings
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
This was missing when VK_EXT_conditional_rendering has been
implemented. The predication type should be -1 to avoid
restoring previous state when performing a decompression pass
with DCC enabled.
Note that we don't have to handle secondary command buffers
because we don't support this feature currently.
CC: 18.2 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Seems like DXVK depends on that and it might get reverted
upstream. Since apps are not supposed to use 0 in v2 anyway,
we should be safe implementing the old behavior there.
Fixes: 66e12451ac "radv: Update to new VK_EXT_vertex_attribute_divisor to version 2."
CC: 18.2 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Seems that in a single case we use the renderpass before checking
the pipeline, so check the renderpass before we use it.
Fixes: fbcd167314 "radv: Add on-demand compilation of built-in shaders."
Tested-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
When moving the array sizes from the old list to the new one it was
not taken into account that the array indices start with one, but the
array_size array started at index zero, which resulted in incorrect array
sizes when arrays were merged. Correct this by copying the array_size
values of the retained arrays with an offset of -1.
Also fix whitespaces for the replaced lines.
Fixes: d8c2119f9b
mesa/st/glsl_to_tgsi: Expose array live range tracking and merging
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Commit 4434591bf5 caused substantially more URB messages in
geometry and tessellation shaders. Before we can really enable this
sort of optimization, We either need some way of combining them back
together into vectors or we need to do cross-stage vector element
elimination without splitting everything into scalars.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107510
Fixes: 4434591bf5 "intel/nir: Call nir_lower_io_to_scalar_early"
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Mark Janes <mark.a.janes@intel.com>
If called with an empty size, brw_emit_buffer_surface_state asserts.
We already have a dedicated helper for uploading nothing, so let's use
that instead.
Avoids an assert in
dEQP-GLES31.functional.shaders.opaque_type_indexing.ssbo.const_literal_vertex
when running a debug build of i965.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Kernel (for ppgtt) requires memory address to be
aligned to page size (4096).
-v2: added marking that also fixes initial commit 01058a5522.
-v3: numbers replaced by PAGE_SIZE; buffer-object size is aligned
instead of alignment of offsets (Chris Wilson).
-v4: changes related to PAGE_SIZE moved to separate commit
-v5: restored alignment to page-size for 0-size.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106997
Fixes: a363bb2cd0 (i965: Allocate VMA in userspace for full-PPGTT systems.)
Fixes: 01058a5522 (i965: Add virtual memory allocator infrastructure to brw_bufmgr.)
Signed-off-by: Sergii Romantsov <sergii.romantsov@globallogic.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Instead of doing conservative guesses, we should report the max levels
based on the max sizes we get from GL on the host.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Jakob Bornecrantz <jakob@collabora.com>
These macro-names are also used for softpipe, so let's avoid confusion
by avoiding them. Besides, they are just used in one place in virgl, so
let's just inline them into the place they are used instead.
While we're at it, fixup an error in the comment for the 3D version.
Mesa subtracts computes max-size by doing by 2^(n-1), which means this
should be 256 cubed, not 512 cubed. The other comments are correct.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Jakob Bornecrantz <jakob@collabora.com>
The last parameter of radeon_set_sh_reg_seq() is the number of
dwords to emit. We were lucky because WAVES_PER_SH(0x3) is 3 but
it was initialized to 0.
COMPUTE_RESOURCE_LIMITS is correctly set when generating
compute pipelines, so we don't need to initialize it.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This patch fixes a regression in mesa 18.2 and mesa-dev branches
for HAVE_DRM_GRALLOC code path which is causing black screen on Android
and prevents boot due to SIGSEGV MAPERR crash related to unproper handling
of drm_gralloc drm FD in new droid_open_device() path.
Problem is due to c7bb82136b ("egl/android: Add DRM node probing and filtering")
To avoid the crash the former existing working droid_open_device() is restored,
renamed droid_open_device_drm_gralloc() and kept within HAVE_DRM_GRALLOC braces.
Tested with mesa-dev and mesa 18.2 branch and oreo-x86 bootanimation
and Androdi GUI booting is fixed with i965, nouveau, radeon.
The changes are compatible with gbm_gralloc, I've tested build with hwc too.
(v2) remove indentation from HAVE_DRM_GRALLOC pre-processor directive
NOTE: Definition of enum{} for GRALLOC_MODULE_PERFORM_GET_DRM_FD
is not necessary and it's actually causing a redefinition building error,
because in HAVE_DRM_GRALLOC path gralloc_drm.h is already exported
by libgralloc_drm which is currently still a dependency.
Fixes: c7bb82136b ("egl/android: Add DRM node probing and filtering")
Cc: "18.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Starting with a6xx, half and full precision registers conflict. Which
makes things a bit more efficient, ie. if some parts of the shader are
heavy on half-precision and others on full precision, you don't have to
allocate the worst case for both. But it means we need to setup some
additional conflicts.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Collapse is_temp() into it's only callsite, and pass compiler object as
struct rather than void. Just cleanups to reduce noise in next patch.
Signed-off-by: Rob Clark <robdclark@gmail.com>
We originally did this because at the time we didn't know all the
bitfields to configure where various frag shader sysval's went. But
we do.
So switch to using sysvals for all the frag shader inputs.
Signed-off-by: Rob Clark <robdclark@gmail.com>
create_input()/create_input_compmask() should take the ctx as arg,
rather than block, to enforce that all inputs are created in the first
block, so that RA sees them as live at the start of the shader.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Make it more clear that this is varying fetch related. Also fixup some
comments. Just cleanup for next patches.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Used internally in freedreno/ir3 for the vec2 value that hw passes to
shader to use as coordinate for bary.f (varying fetch) instruction.
This is not the same as SYSTEM_VALUE_FRAG_COORD.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Behavior wrt firstInstance got changed, and a divisor of 0 has been
disallowed.
The new version of the ext got published in specification 1.1.81.
Sending to stable since the only known user is DXVK, which needs
this for correctness.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
CC: 18.2 <mesa-stable@lists.freedesktop.org>
Following patches will be doing further cleanup after calling
fd_context_destroy() so it is easier if we move the free() into
the per-gen backend code.
Signed-off-by: Rob Clark <robdclark@gmail.com>
this patch brings a number of changes to ir2:
-ir2 now generates CF clauses as necessary during assembly. this simplifies
fd2_program/fd2_compiler and is necessary to implement optimization passes
-ir2 now has separate vector/scalar instructions. this will make it easier
to implementing scheduling of scalar+vector instructions together. dst_reg
is also now seperate from src registers instead of a single list
-ir2 now implements register allocation. this makes it possible to compile
shaders which have more than 64 TGSI registers
-ir2 now implements the following optimizations: removal of IN/OUT MOV
instructions generated by TGSI and removal of unused instructions when
some exports are disabled
-ir2 now allows full 8-bit index for constants
-ir2_alloc no longer allocates 4 times too many bytes
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Rob Clark <robdclark@gmail.com>
In environments where we cannot cache, e.g. Android (no homedir),
ChromeOS (readonly rootfs) or sandboxes (cannot open cache), the
startup cost of creating a device in radv is rather high, due
to compiling all possible built-in pipelines up front. This meant
depending on the CPU a 1-4 sec cost of creating a Device.
For CTS this cost is unacceptable, and likely for starting random
apps too.
So if there is no cache, with this patch radv will compile shaders
on demand. Once there is a cache from the first run, even if
incomplete, the driver knows that it can likely write the cache
and precompiles everything.
Note that I did not switch the buffer and itob/btoi compute pipelines
to on-demand, since you cannot really do anything in Vulkan without
them and there are only a few.
This reduces the CTS runtime for the no caches scenario on my
threadripper from 32 minutes to 8 minutes.
Reviewed-by: Dave Airlie <airlied@redhat.com>
From AppVeyor #8582, it seems that MSVC doesn't like uint, so this
patch replaces it with unsigned.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Meson now uses python3, so let's add a block for Autotools, move that
line into the buildsys-specific blocks, and set the correct version for
Meson.
Fixes: 2ee1c86d71 "meson: Build with Python 3"
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
This is clearly a copy-paste error; if we validate the reladdr2-pointer,
we don't want to traverse to the reladdr-pointer. Especially since the
check above shows that reladdr could be NULL here.
Noticed by Coverity.
CID: 1438389, 1438390
Fixes: 568bda2f2d ("mesa/st/glsl_to_tgsi: Split arrays whose elements are only accessed directly")
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Gert Wollny <gw.fossdev@gmail.com>
Instead of using the copy of shader_info stored in gl_program, it now
uses the one in nir_shader. This is needed for SPIR-V because the
info.tess.tcs_vertices_out is filled in via _mesa_spirv_to_nir which
happens much later than with a GLSL shader. The copy of shader_data in
gl_program is only updated later via brw_shader_gather_info but that
is too late.
For GLSL this shouldn't create any problems because the nir copy of
the shader_info is immediately copied from the gl_program in
glsl_to_nir.
v2: updated after commit "i965: Combine both gl_PatchVerticesIn
lowering passes." (488972) (Alejandro Piñeiro)
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
The value is copied from the gl_program. If we don’t do this then it
will get reset back to zero in brw_shader_gather_info. This isn’t a
problem for GLSL because in that case the nir_shader is initialised
with a copy of the shader_info from the gl_program.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This is the same we do for vulkan drivers
This is needed to pass the following CTS test:
KHR-GL45.gl_spirv.spirv_modules_shader_binary_multiple_shader_objects_test
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
input locations used by input attributes are not handled in the same
way in OpenGL vs Vulkan. There is a detailed explanation of such
differences on the following commit:
c2acf97fcc
So with this commit, the same adjustment that is done after
glsl_to_nir, is being done after spirv_to_nir, when it is used on
OpenGL (ARB_gl_spirv).
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
After commit "nir: Use derefs in nir_lower_samplers"
(75286c2d08) assumes one deref for both
the texture and the sampler. However there are cases (on OpenGL, using
ARB_gl_spirv) where SPIR-V is not providing a sampler, like for
texture query levels ops. Although we could make spirv_to_nir to
provide a sampler deref for those cases, it is not really needed, and
wrong from the Vulkan point of view.
This patch fixes the following (borrowed) tests run on SPIR-V mode:
arb_compute_shader/execution/basic-texelFetch.shader_test
arb_gpu_shader5/execution/sampler_array_indexing/fs-simple-texture-size.shader_test
arb_texture_query_levels/execution/fs-baselevel.shader_test
arb_texture_query_levels/execution/fs-maxlevel.shader_test
arb_texture_query_levels/execution/fs-miptree.shader_test
arb_texture_query_levels/execution/fs-nomips.shader_test
arb_texture_query_levels/execution/vs-baselevel.shader_test
arb_texture_query_levels/execution/vs-maxlevel.shader_test
arb_texture_query_levels/execution/vs-miptree.shader_test
arb_texture_query_levels/execution/vs-nomips.shader_test
glsl-1.30/execution/fs-textureSize-compare.shader_test
v2: merge lower_tex_src_to_offset and calc_sampler_offsets together,
update texture/sampler index and texture_array_size directly on
lower_tex_src_to_offset (Jason)
v3: clarify one comment (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
So they are not exposed through the introspection API.
It is worth to note that the number of hidden uniforms of GLSL linking
vs SPIR-V linking would be somewhat different due the differen order
of the nir lowerings/optimizations.
For example: gl_FbWposYTransform. This is introduced as part of
nir_lower_wpos_ytransform. On GLSL that is executed after the IR-based
linking. So that means that on GLSL the UniformStorage will not
include this uniform. With the SPIR-V linking, that uniform is already
present, but marked as hidden. So it will be included on the
UniformStorage, but as hidden.
One alternative would create a special how_declared for that case, but
seemed an overkill. Using hidden should be ok as far as it is used
properly.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Equivalent to the already existing how_declared at GLSL IR. The only
difference is that we are not adding all the declaration_type
available on GLSL, only the one that we will use on the short term. We
would add more mode if needed on the future.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
GLSL has gl_VertexID which is supposed to be non-zero-based.
SPIR-V has both VertexIndex and VertexId builtins whose meanings are
defined by the APIs.
Vulkan defines VertexIndex as being non-zero-based. In Vulkan VertexId
and InstanceId have no meaning and are pretty much just reserved for
OpenGL at this point.
GL_ARB_spirv removes VertexIndex and defines VertexId to be the same
as gl_VertexId (which is also non-zero-based).
Previously in Mesa it was treating VertexIndex as non-zero-based and
VertexId as zero-based, so it was breaking for GL. This behaviour was
apparently based on Khronos bug 14255. However that bug doesn’t seem
to have made a final decision for VertexId.
Assuming there really is no other definition for VertexId for Vulkan
it seems better to just make them both have the same value.
v2: update comment and commit descriptions, based on Jason Ekstrand
explanation of the meaning/rationale behind all those builtins
(Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
info.gs.output_primitive was already being filled. Not sure why this
is not needed on Vulkan, but we found to be needed for
ARB_gl_spirv. Specifically, this is needed to get the following test
passing:
KHR-GL45.gl_spirv.spirv_validation_builtin_variable_decorations_test
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Patch sets additional formats renderable and enables the extension
when OpenGL ES 3.1 is supported.
v2: instead of dummy_true, have a separate toggle for extension
(Eric Anholt)
v3: add missing checks, simplify some existing checks and fix
glCopyTexImage2D check (Nanley Chery)
add SHORT and BYTE support in read_pixels_es3_error_check
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
One of the reasons we didn't notice that R24_UNORM_X8_TYPELESS
destinations were broken was that an earlier layer was swapping it
out for B8G8R8A8_UNORM. That made Z24X8 -> Z24X8 blits work.
However, R32_FLOAT -> R24_UNORM_X8_TYPELESS was still totally broken.
The old code only considered one format at a time, without thinking
that format conversion may need to occur.
This patch moves the translation out to a place where it can consider
both formats. If both are Z24X8, we continue using B8G8R8A8_UNORM to
avoid having to do shader math workarounds. If we have a Z24X8
destination, but a non-matching source, we use our shader hacks to
actually render to it properly.
Fixes: 804856fa57 (intel/blorp: Handle more exotic destination formats)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The hardware doesn't support rendering to R24_UNORM_X8_TYPELESS, so
Jason decided to fake it with a bit of shader math and R32_UNORM RTs.
The only problem is that R32_UNORM isn't renderable either...so we've
just traded one bad format for another.
This patch makes us use R32_UINT instead.
Fixes: 804856fa57 (intel/blorp: Handle more exotic destination formats)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This patch ties in the array split, merge, and interleave code.
shader-db changes in the TGSI code are:
original code | array-merge | change
mean max | mean max | best mean % worst
-----------------------------------------------------------
arrays 0.05 2 | 0.00 0 | -2 -100 0
total temps 5.05 21 | 4.92 20 | -15 -2.59 1
instr 55.33 988 | 55.20 988 | -15 -0.24 0
Evaluation:
Run shader-db in single thread mode (otherwise the output is
not ordered and the best and worst column don't make sense) to
get results pre-stats.txt and post-stats.txt. Then using
python pandas:
import pandas as pd
old_stats = pd.read_csv('pre-stats.txt')
new_stats = pd.read_csv('post-stats.txt')
omean = old_stats.mean()
omax = old_stats.max()
nmean = new_stats.mean()
nmax = new_stats.max()
delta = new_stats - old_stats
pd.concat([omean, omax, nmean, nmax, delta.min(),
delta.mean()/old_stats.mean()*100, delta.max()],
axis=1, keys=['mean', 'max', 'mean', 'max', 'best',
'avg change %', 'worst'])
v4: - Correct typo and add bugs that are fixed by this series.
- Update stats and describe stats evaluation
Bugzilla:
https://bugs.freedesktop.org/show_bug.cgi?id=105371https://bugs.freedesktop.org/show_bug.cgi?id=100200
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Acked-by: Dave Airlie <airlied@redhat.com>
v4: Also track the register given in inst->resource. (thanks: Benedikt Schemmer
for testing the patches on radeonsi, which revealed that I was missing
tracking this)
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Because of the indirect access it is impossible to obtain an accurate per
component and array element tracking. Therefore, the tracking is simplified
to only track whether any element was accessed, whether this happend
conditionally in a loop. In addition, while tracking of temporaries requires
a per-componet tracking that is later fused, for arrays only the components
access mask is neede. The resulting tracking code and evaluation of the array
live range is sufficiently different from the evaluation of the live range of
temporaries to justify implementing this in a different class instead of
adding more complexity to the already existing code for temporary life
range evaluation.
v4: Update commit message to make it clearer why this class is seperate from
the tracking of temporaries.
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Acked-by: Dave Airlie <airlied@redhat.com>
In preparation of the array live range tracking the evaluation of the read
mask is moved out the register live range tracking to the enclosing call
of the generalized read access tracking.
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Acked-by: Dave Airlie <airlied@redhat.com>
In preparartion of adding the tracking of the live range the classes that refer
to temporary registers are renamed.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Acked-by: Dave Airlie <airlied@redhat.com>
v2: - Define tests also in the meson.build file.
v4: - Check no-op mapping of all bits.
- Convert tests to the new class layout used in the merge evaulation.
- remove dependency on llvm in meson build (Thanks Dylan Baker for pointing
out that this might not needed)
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Acked-by: Dave Airlie <airlied@redhat.com>
v4: - Update the code to use the new merge logic.
- Use a cleaner, class-based approach for the evaluation of merges.
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Acked-by: Dave Airlie <airlied@redhat.com>
v4: - Remove logic for evaluation of swizzles and merges since this
was moved to array_live_range. This class now only handles the
actual remapping.
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Acked-by: Dave Airlie <airlied@redhat.com>
This class holds the array length, live range, and accessed components, and
it implements the logic for evaluating how arrays are merged and interleaved.
v4: - Add logic to evaluate merge and interleave of a pair of arrays to
the class array_live_range.
- document class
- update commit message
Thanks Nicolai Hähnle for the pointers given.
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Acked-by: Dave Airlie <airlied@redhat.com>
On one hand "live range" is the term used in the literature, and on the
other hand a distinction is needed from the array live ranges.
v4: Fix indentions and white spaces
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com> (v3)
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Acked-by: Dave Airlie <airlied@redhat.com>
in constructs like below, currently the live range estimation extends the live range
of t unecessarily to the whole loop because it was not detected that t is
unconditional written and later read only in the "if (a)" scope.
while (foo) {
...
if (a) {
...
if (b)
t = ...
else
t = ...
x = t;
...
}
...
}
This patch adds a unit test for this case and corrects the minimal live range estimation
accordingly.
v4: update comments
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Array whose elements are only accessed directly are replaced by the
according number of temporary registers. By doing so the otherwise
reserved register range becomes subject to further optimizations like
copy propagation and register merging.
Thanks to the resulting reduced register pressure this patch makes
the piglits
spec/glsl-1.50/execution -
variable-indexing/vs-output-array-vec3-index-wr-before-gs
geometry/max-input-components
pass on r600 (barts) where they would fail before with a "GPR limit exceeded"
error (even with the spilling that was recently added).
v2: * rename method dissolve_arrays to split_arrays
* unify the tracking and remapping methods for src and dst registers
* also track access to arrays via reladdr*
v3: * enable this optimization only if the driver requests register merge
v4: * Correct comments
* Also update inst->resource if it is an array element
(thanks: Benedikt Schemmer for testing the patches on radeonsi, which
revealed that I was missing tracking this)
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Acked-by: Dave Airlie <airlied@redhat.com>
When mesa is compiled in debug mode then this adds the possibility
to print out some statistics about the translated and optimized TGSI
shaders to a file.
The functionality is enabled by setting the environment variable
GLSL_TO_TGSI_PRINT_STATS
to the file name where the statistics should be collected. The file is
opened in append mode so that statistics from various runs will be
accumulated.
v4: Make accress to log file thread save (thanks for pointing this out Nicolai
Hähnle)
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Acked-by: Dave Airlie <airlied@redhat.com>
The GLSL operations findLSB, findMSB, and countBits always return
a signed integer type. Let TGSI reflect this.
v2: Properly set values in infer_(src|dst)_type (Thanks Roland
Schneidegger for pointing out problems with my 1st approach)
v2: Set values in the common infer_type code path, and only add
the correct source type for UMSB (Roland Schneidegger)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Now that all the build scripts are compatible with both Python 2 and 3,
we can flip the switch and tell Meson to use the latter.
Since Meson already depends on Python 3 anyway, this means we don't need
two different Python stacks to build Mesa.
Signed-off-by: Mathieu Bridon <bochecha@daitauha.fr>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
In both Python 2 and 3, opening a file without specifying the mode will
open it for reading in text mode ('r').
On Python 2, the read() method of a file object opened in mode 'r' will
return byte strings, while on Python 3 it will return unicode strings.
Explicitly specifying the binary mode ('rb') then decoding the byte
string means we always handle unicode strings on both Python 2 and 3.
Which in turns means all re.match(line) will return unicode strings as
well.
If we also make expandCString return unicode strings, we don't need the
call to the unicode() constructor any more.
We were using the ugettext() method because it always returns unicode
strings in Python 2, contrarily to the gettext() one which returns
byte strings. The ugettext() method doesn't exist on Python 3, so we
must use the right method on each version of Python.
The last hurdles are that Python 3 doesn't let us concatenate unicode
and byte strings directly, and that Python 2's stdout wants encoded byte
strings while Python 3's want unicode strings.
With these changes, the script gives the same output on both Python 2
and 3.
Signed-off-by: Mathieu Bridon <bochecha@daitauha.fr>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
On Python 3, executing `foo != bar` will first try to call
foo.__ne__(bar), and fallback on the opposite result of foo.__eq__(bar).
Python 2 does not do that.
As a result, those __eq__ methods were never called, when we were
testing for inequality.
Expliclty adding the __ne__ methods fixes this issue, in a way that is
compatible with both Python 2 and 3.
However, this means the __eq__ methods are now called when testing for
`foo != None`, so they need to be guarded correctly.
Signed-off-by: Mathieu Bridon <bochecha@daitauha.fr>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
The check for ETC2 compatibility was not updated when the fallback
format was changed.
Fixes: 71867a0a61
st/mesa: Fall back to R8G8B8A8_SRGB for ETC2
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Instead of copying the list, then sorting the copy in-place, we can just
get a new sorted copy directly.
Signed-off-by: Mathieu Bridon <bochecha@daitauha.fr>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
In Python 2, the traditional way to sort containers was to use a
comparison function (which returned either -1, 0 or 1 when passed two
objects) and pass that as the "cmp" argument to the container's sort()
method.
Python 2.4 introduced key-functions, which instead only operate on a
given item, and return a sorting key for this item.
In general, this runs faster, because the cmp-function has to get run
multiple times for each item of the container.
Python 3 removed the cmp-function, enforcing usage of key-functions
instead.
This change makes the script compatible with Python 2 and Python 3.
Signed-off-by: Mathieu Bridon <bochecha@daitauha.fr>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Python 3 lost the long type: now everything is an int, with the right
size.
This commit makes the script compatible with Python 2 (where we check
for both int and long) and Python 3 (where we only check for int).
Signed-off-by: Mathieu Bridon <bochecha@daitauha.fr>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Mixing the two is a long-standing recipe for errors in Python 2, so much
so that Python 3 now completely separates them.
This commit stops treating both as if they were the same, and in the
process makes the script compatible with both Python 2 and 3.
Signed-off-by: Mathieu Bridon <bochecha@daitauha.fr>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
On Python 2, the builtin functions filter() returns a list.
On Python 3, it returns an iterator.
Since we want to use those objects in contexts where we need lists, we
need to explicitly turn them into lists.
This makes the code compatible with both Python 2 and Python 3.
Signed-off-by: Mathieu Bridon <bochecha@daitauha.fr>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
The code was just reimplementing itertools.combinations_with_replacement
in a less efficient way.
This does change the order of the results slightly, but it should be ok.
Signed-off-by: Mathieu Bridon <bochecha@daitauha.fr>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
This is basically copied from the DRI2 destroy path. Without this,
Raspberry Pi would quickly run out of CMA during the EGL tests in the CTS
due to all the pixmaps laying around.
Fixes: f35198bade ("egl/x11: Implement dri3 support with loader's dri3 helper")
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
When the SIMD16 Gen4-5 fragment shader payload contains source depth
(g2-3), destination stencil (g4), and destination depth (g5-6), the
single register of stencil makes the destination depth unaligned.
We were generating this instruction in the RT write payload setup:
mov(16) m14<1>F g5<8,8,1>F { align1 compr };
which is illegal, instructions with a source region spanning more than
one register need to be aligned to even registers. This is because the
hardware implicitly does (nr | 1) instead of (nr + 1) when splitting the
compressed instruction into two mov(8)'s.
I believe this would cause the hardware to load g5 twice, replicating
subspan 0-1's destination depth to subspan 2-3. This showed up as 2x2
artifact blocks in both TIS-100 and Reicast.
Normally, we rely on the register allocator to even-align our virtual
GRFs. But we don't control the payload, so we need to lower SIMD widths
to make it work. To fix this, we teach lower_simd_width about the
restriction, and then call it again after lower_load_payload (which is
what generates the offending MOV).
Fixes: 8aee87fe4c (i965: Use SIMD16 instead of SIMD8 on Gen4 when possible.)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107212
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=13728
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: Diego Viola <diego.viola@gmail.com>
According to the G45 PRM Volume 2 Page 265 we're supposed to only set
these signals when there is an actual depth buffer. Note that we
already do this for the stencil buffer by virtue of brw->stencil_enabled
invoking _mesa_is_stencil_enabled(ctx) which checks whether the current
drawbuffer's visual has stencil bits (which is updated based on what
buffers are bound). We just need to do it for depth as well.
Not observed to fix anything.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This extension is not defined for indirect contexts. Marking it as
"client only", as the old code did here, would make the extension
available in indirect contexts, even though the server would certainly
not have it in its extension list.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Previously, we would load out the tile-aligned area, update the raster
copy, and store it back. This was a huge cost for XPutImage calls to the
screen under glamor.
Instead, implement a general load/store path that walks over the source
x/y writing into the corresponding pixel of the destination (using clever
math from
https://fgiesen.wordpress.com/2011/01/17/texture-tiling-and-swizzling/).
If things are aligned, we go through the previous utile-at-a-time loop.
Improves x11perf -putimage10 performance by 139.777% +/- 2.83464% (n=5)
Improves x11perf -putimage100 performance by 383.908% +/- 22.6297% (n=11)
Improves x11perf -getimage10 performance by 2.75731% +/- 0.585054% (n=145)
For the partial load/store support I'm about to add, we want the memcpy to
be compiled out to a single load/store. This should also eliminate the
calls to vc4_utile_width/height().
Improves x11perf -putimage100 performance by 3.76344% +/- 1.16978% (n=15)
According to EGL 1.5 spec, section 3.10.1.1 ("Native Window Resizing"):
"If the native window corresponding to _surface_ has been resized
prior to the swap, _surface_ must be resized to match. _surface_ will
normally be resized by the EGL implementation at the time the native
window is resized. If the implementation cannot do this transparently
to the client, then *eglSwapBuffers* must detect the change and
resize surface prior to copying its pixels to the native window."
So far, resizing a native window in Wayland/EGL was interpreted in Mesa
as a request to resize, which is not executed until the first draw call.
And hence, surface size is not updated until executing it. Thus,
querying the surface size with eglQuerySurface() after a window resize
still returns the old values.
This commit updates the surface size values as soon as the resize is
done, even when the real resize is done in the draw call. This makes the
semantics that any native window resize request take effect inmediately,
and if user calls eglQuerySurface() it will return the new resized
values.
v2: update surface size if there isn't a back surface (Daniel)
CC: Daniel Stone <daniel@fooishbar.org>
CC: mesa-stable@lists.freedesktop.org
Reviewed-by: Daniel Stone <daniels@collabora.com>
When creating a windows surface with eglCreateWindowSurface(), the
width and height returned by eglQuerySurface(EGL_{WIDTH,HEIGHT}) is
invalid until buffers are updated (like calling glClear()).
But according to EGL 1.5 spec, section 3.5.6 ("Surface Attributes"):
"Querying EGL_WIDTH and EGL_HEIGHT returns respectively the width and
height, in pixels, of the surface. For a window or pixmap surface,
these values are initially equal to the width and height of the
native window or pixmap with respect to which the surface was
created"
This fixes dEQP-EGL.functional.color_clears.* CTS tests
v2:
- Do not modify attached_{width,height} (Daniel)
- Do not update size on resizing window (Brendan)
CC: Daniel Stone <daniel@fooishbar.org>
CC: Brendan King <brendan.king@imgtec.com>
CC: mesa-stable@lists.freedesktop.org
Tested-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Like in the autotools target, make the list of drivers to be built in
each of the Meson targets explicit.
This will help to identify missing dependencies and other issues more
easily.
CC: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
instead of the underlying texture's target. This fixes an issue
where the TGSI sampler type was not agreeing with the sampler view
target/type. In particular, this fixes a Mint 19 XFCE desktop
scaling issue because the TGSI code was using a RECT sampler but
the sampler view's underlying texture was PIPE_TEXTURE_2D.
We want to use the sampler view's type rather than the underlying
resource, as we do for the view's surface format.
No piglit regressions.
VMware issue 2156696.
Reviewed-by: Neha Bhende <bhenden@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
I'm not sure why we didn't support this in the past, but fillmode
is supported by all renderers nowadays.
Also fix the logic in svga_create_rasterizer_state() to avoid a few
swtnl case.
No piglit regressions
Reviewed-by: Neha Bhende <bhenden@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Fixes failed assertion running Piglit polygon-mode-face test.
Though, the test still does not pass.
Reviewed-by: Neha Bhende <bhenden@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Add -fno-math-errno and -fno-trapping-math to the build.
Mesa does not depend on the functionality provided, thus this should
result in slightly faster code and smaller binaries.
Cc: Tapani Pälli <tapani.palli@intel.com>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Tapani Pälli <tapani.palli@intel.com>
The toggles were broken with the introduction of --enable-mangling.
Fixing that up might be possible, but it's not worth the complexity
since one can rename the libraries at any point.
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The respective drivers have been updated and the helpers are no longer
needed.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
In LLVM <6.0 we added explicitly libedit-dev, as it was required to
satisfy apt dependencies.
In LLVM 6.0, this is not required anymore, so let's remove it.
CC: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The virgl driver cares about the writable-flag on image definitions,
because it re-emits GLSL from the TGSI. However, so far it was hardcoded
to true in glsl_to_tgsi, which cause problems when virglrenderer is
running on top of GLES 3.1, where not all formats are supported for
writable images.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We won't have an FD if we're just having the server wait on a fence
created by eglCreateSyncKHR(). Our seqno fences will happen in order, so
server-side waits are no-ops in that case. Fixes
dEQP-EGL.functional.sharing.gles2.multithread.simple_egl_server_sync.buffers.gen_delete
Fixes: b0acc3a562 ("broadcom/vc4: Native fence fd support")
Reduces the size of vc4_uniforms.o by about 10%. We would basically
always end up loading the cachline of uinfo->data[i] anyway, so it should
be good for performance as well as making the code a bit cleaner.
The HW only executes a load once the tile coordinates packet happens, and
only tracks one at a time, so by emitting our two MSAA loads back to back
we would end up with an undefined color or Z buffer. The simulator
doesn't seem to care, but sync up the RCL generation with the kernel
anyway.
Fixes dEQP-EGL.functional.render.multi_context.gles2.rgb888_window
Fixes texturing from EGL images created from cubemap faces, as in
dEQP-EGL.functional.image.create.gles2_cubemap_negative_x_rgba_texture
Cc: mesa-stable@lists.freedesktop.org
We're trying to write a unicode string (i.e decoded) to a file opened
in binary (i.e encoded) mode.
In Python 2 this works, because of the automatic conversion between
byte and unicode strings.
In Python 3 this fails though, as no automatic conversion is attempted.
This change makes the scripts compatible with both versions of Python.
Signed-off-by: Mathieu Bridon <bochecha@daitauha.fr>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Python 3 doesn't call objects __cmp__() methods any more to compare
them. Instead, it requires implementing the rich comparison methods
explicitly: __eq__(), __ne(), __lt__(), __le__(), __gt__() and __ge__().
Fortunately Python 2 also supports those.
This commit only implements the comparison methods which are actually
used by the build scripts.
Signed-off-by: Mathieu Bridon <bochecha@daitauha.fr>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
In Python 2, divisions of integers return an integer:
>>> 32 / 4
8
In Python 3 though, they return floats:
>>> 32 / 4
8.0
However, Python 3 has an explicit integer division operator:
>>> 32 // 4
8
That operator exists on Python >= 2.2, so let's use it everywhere to
make the scripts compatible with both Python 2 and 3.
In addition, using __future__.division tells Python 2 to behave the same
way as Python 3, which helps ensure the scripts produce the same output
in both versions of Python.
Signed-off-by: Mathieu Bridon <bochecha@daitauha.fr>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com> (v2)
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
A follow-up patch enables EGL_KHR_mutable_render_buffer for Android.
This patch is separate from the Android patch because I think it's
easier to review the platform-independent bits separately.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
If set, then the config will have __DRI_ATTRIB_MUTABLE_RENDER_BUFFER,
which translates to EGL_MUTABLE_RENDER_BUFFER_BIT_KHR.
Not used yet.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Define extensions DRI_MutableRenderBufferDriver and
DRI_MutableRenderBufferLoader. These are the two halves for
EGL_KHR_mutable_render_buffer.
Outside the DRI code there is one additional change. Add
gl_config::mutableRenderBuffer to match
__DRI_ATTRIB_MUTABLE_RENDER_BUFFER. Neither are used yet.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
This pulls an 'else' block into the function's main body, making the
code easier to follow.
Without this change, the upcoming EGL_KHR_mutable_render_buffer patch
transforms dri2_make_current() into spaghetti.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
There exist *two* queryable EGL_RENDER_BUFFER states in EGL:
eglQuerySurface(EGL_RENDER_BUFFER) and
eglQueryContext(EGL_RENDER_BUFFER).
These changes eliminate potentially very fragile code in the upcoming
EGL_KHR_mutable_render_buffer implementation.
* eglQuerySurface(EGL_RENDER_BUFFER)
The implementation of eglQuerySurface(EGL_RENDER_BUFFER) contained
abstruse logic which required comprehending the specification
complexities of how the two EGL_RENDER_BUFFER states interact. The
function sometimes returned _EGLContext::WindowRenderBuffer, sometimes
_EGLSurface::RenderBuffer. Why? The function tried to encode the
actual logic from the EGL spec. When did the function return which
variable? Go study the EGL spec, hope you understand it, then hope
Mesa mutated the EGL_RENDER_BUFFER state in all the correct places.
Have fun.
To simplify eglQuerySurface(EGL_RENDER_BUFFER), and to improve
confidence in its correctness, flatten its indirect logic. For pixmap
and pbuffer surfaces, simply return a hard-coded literal value, as the
spec suggests. For window surfaces, simply return
_EGLSurface::RequestedRenderBuffer. Nothing difficult here.
* eglQueryContext(EGL_RENDER_BUFFER)
The implementation of this suffered from the same issues as
eglQuerySurface, and the solution is the same. confidence in its
correctness, flatten its indirect logic. For pixmap and pbuffer
surfaces, simply return a hard-coded literal value, as the spec
suggests. For window surfaces, simply return
_EGLSurface::ActiveRenderBuffer.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
As the spec says:
EGL_BAD_NATIVE_PIXMAP is generated if the implementation
does not support native pixmaps.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Currently dri2_copy_buffers is used for swrast, which depends on the
DRI2_FLUSH extension. Since that's not a thing on software based
drivers we crash out.
Do the slightly more graceful, thing of returning EGL_FALSE.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
There's little point in calling _eglGetNativePlatform() in
eglCopyBuffers. The platform returned should be identical to the one
already stored in our _EGLDisplay.
In the following corner case, the check is incorrect.
The function _eglGetNativePlatform effectively invokes the old-style
eglGetDisplay platform selection. Thus if the EGL_PLATFORM platform does
not match with the EGL_EXT_platform_* used to create the display we'll
error out.
Addresses the egl-copy-buffers piglit test.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
With version v1.15 the "code" option was deprecated in favour of
"private-code" or "public-code".
Before the interface symbol generated was exported (which is a bad idea
since it's internal implementation detail) and others may misuse it.
That was the case with libva approx. 1 year ago. Since then libva was
fixed, so we can finally hide it by using "private-code"
Inspired by similar xserver patch by Adam Jackson.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
With version v1.15 the "code" option was deprecated in favour of
"private-code" or "public-code".
Before the interface symbol generated was exported (which is a bad idea
since it's internal implementation detail) and others may misuse it.
That was the case with libva approx. 1 year ago. Since then libva was
fixed, so we can finally hide it by using "private-code"
Inspired by similar xserver patch by Adam Jackson.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
This matches what this field is called in virglrenderer's copy of
this.
This reduces the diff between the two different versions of
virgl_hw.h, and should make it easier to upgrade the file in
the future.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Found when debugging register spilling -- we would try to spill the dest
of a STVPMV, inserting spill code after entering the last segment. In
fact, we were likely to to choose to do this, given that the STVPMV "dest"
temp was never read from, making it cheap to spill.
Cc: "18.2" <mesa-stable@lists.freedesktop.org>
The simulator complained that we had write responses outstanding at shader
end. It seems that a TMU read does not guarantee that previous TMU writes
by the thread have completed, which surprised me.
Cc: "18.2" <mesa-stable@lists.freedesktop.org>
This is useful for periodically testing out register spilling to see how
it goes on simple shaders, rather than only failing on insanely
complicated ones.
In commit cf54bd5e8, dri_sw_winsys.c began using <sys/shm.h> to support
the new functions putImageShm, getImageShm in DRI_SWRastLoader. But
Android began supporting System V shared memory only in Oreo. Nougat has
no shm headers.
Fix the build by ifdef'ing out the shm code on Nougat.
Fixes: cf54bd5e8 "drisw: use shared memory when possible"
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@gmail.com>
os.path.exists doesn't return True for stale symlinks, but they are in
the way later, when a link/file with the same name is to be created.
For instance it is conceivable that the pointed to file is replaced by
a file with a new name, and then the symlink is dead.
To handle this check specifically for all existing symlinks to be
removed. (This bugged me for some time with a link libXvMCr600.so
always being in the way of installing this file)
v2: use only os.lexist and replace all instances of os.exist (Dylan Baker)
v3: handle directory check correctly (Eric Engestrom)
Fixes: f7f1b30f81
("meson: extend install_megadrivers script to handle symmlinking")
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>(v2 minus dir check)
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
This change helps with some of the dEQP-VK.wsi.android.* tests that
try to create swapchain with using such formats.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
We already guarded all OP_SULDP against out of bound accesses, but we
ended up just reusing whatever value was stored in the dest registers.
Fixes CTS test shader_image_load_store.incomplete_textures
v2: fix for loads not ending up with predicates (bindless_texture)
v3: fix replacing the def
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
mitigates hurt shaders after adding sqrt:
total instructions in shared programs : 5456166 -> 5454825 (-0.02%)
total gprs used in shared programs : 647522 -> 647551 (0.00%)
total shared used in shared programs : 389120 -> 389120 (0.00%)
total local used in shared programs : 21064 -> 21064 (0.00%)
total bytes used in shared programs : 58288696 -> 58274448 (-0.02%)
local shared gpr inst bytes
helped 0 0 0 516 516
hurt 0 0 27 2 2
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
./GpuTest /test=pixmark_piano 1024x640 30sec:
301 -> 327 points
shader-db:
total instructions in shared programs : 5472103 -> 5456166 (-0.29%)
total gprs used in shared programs : 647530 -> 647522 (-0.00%)
total shared used in shared programs : 389120 -> 389120 (0.00%)
total local used in shared programs : 21064 -> 21064 (0.00%)
total bytes used in shared programs : 58459304 -> 58288696 (-0.29%)
local shared gpr inst bytes
helped 0 0 27 8281 8281
hurt 0 0 21 431 431
v2: use NVISA_GM200_CHIPSET
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Since we don't support streaming an aub file, we can drop the decoding
status enum.
v2: include stdbool (Eric)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Up to now we've been lucky that the buffer returned was always exactly
at the address we requested.
Fixes: 144b40db54 ("intel: aubinator: drop the 1Tb GTT mapping")
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
All Gen platforms had pretty similar results. (Skylake shown)
total instructions in shared programs: 14276892 -> 14276886 (<.01%)
instructions in affected programs: 484 -> 478 (-1.24%)
helped: 2
HURT: 0
total cycles in shared programs: 532578397 -> 532578395 (<.01%)
cycles in affected programs: 3522 -> 3520 (-0.06%)
helped: 1
HURT: 0
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Thomas Helland <thomashelland90@gmail.com>
All Gen platforms had pretty similar results. (Skylake shown)
total instructions in shared programs: 14277220 -> 14277216 (<.01%)
instructions in affected programs: 422 -> 418 (-0.95%)
helped: 2
HURT: 0
total cycles in shared programs: 532577908 -> 532577848 (<.01%)
cycles in affected programs: 2800 -> 2740 (-2.14%)
helped: 2
HURT: 0
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Thomas Helland <thomashelland90@gmail.com>
Unlike the much older -abs(a) >= 0.0 transformation, this is not
precise. The behavior changes if the source is NaN.
No shader-db changes on any platform.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Thomas Helland <thomashelland90@gmail.com>
A problem was reported with arm,arm64 targets build due to missing
libLLVM shared library dependency with AOSP; to avoid this issue vulkan.radv
is built conditionally only when radeonsi is in BOARD_GPU_DRIVERS
Fixes: 0ca153f869 ("android: radv: enable build of vulkan.radv HAL module")
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: "18.2" <mesa-stable@lists.freedesktop.org>
d3d10 requires NaNs to get converted to 0 for float->unorm conversions
(and float->int etc.). GL spec probably doesn't care in general, but it
would make sense to have reasonable behavior in any case imho - the
old code was converting negative NaNs to 0, and positive NaNs to 255.
(Note that using float comparison isn't actually all that much more
effort in any case, at least with sse2 it's just float comparison
(ucommiss) instead of int one - I converted the second comparison
to float too simply because it saves the probably somewhat expensive
transfer of the float from simd to int domain (with sse2 via stack),
so the generated code actually has 2 less instructions, although float
comparisons are more expensive than int ones.)
Reviewed-by: Brian Paul <brianp@vmware.com>
This is a forward port of a patch from the AOSP/master tree:
bd633f11de%5E%21/
Which replaces HOST_OUT_release with HOST_OUT
As per Dan's explanation, the current code was incorrect to use
$(HOST_OUT_release) as $(HOST_OUT) will be set properly for
whether the current build that's being cleaned during
incrementals is using host debug or release builds.
Additionally Dan noted it was incredibly uncommon to use a debug
host build, as there was never a shortcut and one had to set an
environment variable manually. Thus it was rarely if ever tested.
Change-Id: I7972c0a50fa3520dcfa962d6dd7e602bfe22368d
Cc: Rob Herring <rob.herring@linaro.org>
Cc: Alistair Strachan <astrachan@google.com>
Cc: Marissa Wall <marissaw@google.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
This is a partial cherry-pick from AOSP's mesa3d tree:
a88dcf769e%5E%21/
"We're deprecating make implicit rules, preferring static pattern
rules, or just regular rules."
Without this patch, the freedesktop/master branch won't build in
the AOSP environment, and this patch corrects that, as tested
on the Dragonboard 820c.
The i965 portion of the patch this is based on collided badly,
and I'm not sure how to best forward port it. However, so far
we don't see build issues without that portion.
Comments or feedback would be appreciated!
Change-Id: Id6dfd0d018cbd665fa19d80c14abd5f75fa10b8a
Cc: Rob Herring <rob.herring@linaro.org>
Cc: Alistair Strachan <astrachan@google.com>
Cc: Marissa Wall <marissaw@google.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Previously, I added a switch case for GL 2.1 (ed7a0770b881791dd697f3).
I don't know of any driver which only supports GL 2.0, but adding
this switch case avoids a failure if the app queries
GL_SHADING_LANGUAGE_VERSION.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This leaves us with a series of little anv_pipeline_compile_* functions
which each take a compiler object, a mem_ctx, the stage to compile, and
the previous stage for VUE linking purposes. Some of them do
interesting things but most are little more than wrappers around
brw_compile_*.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This breaks compilation up a bit into "link" and "compile". In the
"link" stage, new anv_pipeline_link_* helpers are called which are
responsible for setting up the binding table and doing anything needed
to properly link with the next stage in the pipeline if one exists.
They are called in reverse order starting with the fragment shader so
you can assume linking in later stages is already done.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
We can set active_stages much more directly and then it's just candy
around setting pipeline->stages[stage].
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Instead of hashing each stage separately (and TES and TCS together), we
hash the entire pipeline. This means we'll get fewer cache hits if
they, for instance, re-use the same VS over and over again but it also
means we can now safely do cross-stage optimizations.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Instead of having each anv_pipeline_compile_* function populate the
shader key, make it part of the anv_pipeline_stage struct and fill it
out up-front.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
With a sufficently recent meson, the following warning is produced:
WARNING: Passed invalid keyword argument "extra_args".
WARNING: This will become a hard error in the future.
It seems that compiler.links(args:) is meant here.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-and-Tested-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Zeroing memory after calloc is not necessary. This also allows to avoid
possible crash when allocation fails, because memset is called before
checking screen for NULL.
Fixes: a29d63ecf7 "swr: refactor swr_create_screen to allow
for proper cleanup on error"
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
2018-08-02 11:13:40 +01:00
1846 changed files with 152015 additions and 52025 deletions
# Appveyor defaults core.autocrlf to input instead of the default (true), but
# that can hide problems processing CRLF text on Windows
- git config --global core.autocrlf true
environment:
WINFLEXBISON_ARCHIVE:win_flex_bison-2.5.9.zip
LLVM_ARCHIVE:llvm-5.0.1-msvc2015-mtd.7z
WINFLEXBISON_VERSION:2.5.15
LLVM_ARCHIVE:llvm-5.0.1-msvc2017-mtd.7z
install:
# Check git config
- git config core.autocrlf
# Check pip
- python --version
- python -m pip --version
# Install Mako
- python -m pip install Mako==1.0.6
- python -m pip install Mako==1.0.7
# Install pywin32 extensions, needed by SCons
- python -m pip install pypiwin32
# Install python wheels, necessary to install SCons via pip
- python -m pip install wheel
# Install SCons
- python -m pip install scons==2.5.1
- python -m pip install scons==3.0.1
- scons --version
# Install flex/bison
- if not exist "%WINFLEXBISON_ARCHIVE%" appveyor DownloadFile "https://downloads.sourceforge.net/project/winflexbison/old_versions/%WINFLEXBISON_ARCHIVE%"
- set WINFLEXBISON_ARCHIVE=win_flex_bison-%WINFLEXBISON_VERSION%.zip
- if not exist "%WINFLEXBISON_ARCHIVE%" appveyor DownloadFile "https://github.com/lexxmark/winflexbison/releases/download/v%WINFLEXBISON_VERSION%/%WINFLEXBISON_ARCHIVE%"
- 7z x -y -owinflexbison\ "%WINFLEXBISON_ARCHIVE%" > nul
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=13728">Bug 13728</a> - [G965] Some objects in Neverwinter Nights Linux version not displayed correctly</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107117">Bug 107117</a> - mesa-18.1: regression with TFP on intel with modesettings and glamor acceleration</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107212">Bug 107212</a> - Dual-Core CPU E5500 / G45: RetroArch with reicast core results in corrupted graphics</li>
</ul>
<h2>Changes</h2>
<p>Adam Jackson (1):</p>
<ul>
<li>glx: GLX_MESA_multithread_makecurrent is direct-only</li>
</ul>
<p>Andres Gomez (3):</p>
<ul>
<li>ddebug: use util_snprintf() in dd_get_debug_filename_and_mkdir</li>
<li>gallium/aux/util: use util_snprintf() in test_texture_barrier</li>
<li>glsl: use util_snprintf()</li>
</ul>
<p>Christian Gmeiner (1):</p>
<ul>
<li>etnaviv: fix typo in query names</li>
</ul>
<p>Dave Airlie (1):</p>
<ul>
<li>r600: reduce num compute threads to 1024.</li>
</ul>
<p>Dylan Baker (6):</p>
<ul>
<li>docs: Add sha-256 sums for 18.1.5</li>
<li>nir/meson: fix c vs cpp args for nir test</li>
<li>gallium: fix ddebug on windows</li>
<li>cherry-ignore: add patches that get-pick-list is finding in error</li>
<li>cherry-ignore: Add some additional patches that are for 18.2</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=101247">Bug 101247</a> - Mesa fails to link GLSL programs with unused output blocks</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104809">Bug 104809</a> - anv: DOOM 2016 and Wolfenstein II:The New Colossus crash due to not having depthBoundsTest</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105904">Bug 105904</a> - Needed to delete mesa shader cache after driver upgrade for 32 bit wine vulkan programs to work.</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106738">Bug 106738</a> - No test for miptrees with DRI modifiers</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107359">Bug 107359</a> - [Regression] [bisected] [OpenGL CTS] [SKL,BDW] KHR-GL46.texture_barrier*-texels, GTF-GL46.gtf21.GL2FixedTests.buffer_corners.buffer_corners, and GTF-GL46.gtf21.GL2FixedTests.stencil_plane_corners.stencil_plane_corners fail with some configuration</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107477">Bug 107477</a> - [DXVK] Setting high shader quality in GTA V results in LLVM error</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107579">Bug 107579</a> - [SNB] The graphic corruption when we reuse the GS compiled and used for TFB when statebuffer contain magic trash in the unused space</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107601">Bug 107601</a> - Rise of the Tomb Raider Segmentation Fault when the game starts</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107760">Bug 107760</a> - GPU Hang when Playing DiRT 3 Complete Edition using Steam Play with DXVK</li>
</ul>
<h2>Changes</h2>
<p>Andrii Simiklit (1):</p>
<ul>
<li>i965/gen6/xfb: handle case where transform feedback is not active</li>
</ul>
<p>Bas Nieuwenhuizen (3):</p>
<ul>
<li>radv: Add missing checks in radv_get_image_format_properties.</li>
<li>radv: Fix CMASK dimensions.</li>
<li>radv: Use a lower max offchip buffer count.</li>
</ul>
<p>Christian Gmeiner (1):</p>
<ul>
<li>tegra: fix memory leak</li>
</ul>
<p>Daniel Stone (1):</p>
<ul>
<li>st/dri: Don't expose sRGB formats to clients</li>
</ul>
<p>Dave Airlie (1):</p>
<ul>
<li>ac/radeonsi: fix CIK copy max size</li>
</ul>
<p>Dylan Baker (10):</p>
<ul>
<li>docs: Add mesa 18.1.7 notes</li>
<li>cherry-ignore: add a patch</li>
<li>cherry-ignore: Add more 18.2 only patches</li>
<li>meson: Actually load translation files</li>
<li>cherry-ignore: Add more 18.2 patches</li>
<li>cherry-ignore: Add additional patch</li>
<li>cherry-ignore: Add patch that doesn't apply to 18.1</li>
<li>cherry-ignore: Add a couple of two fixes warning patches</li>
<li>cherry-ignore: Add patch that needs more significant patches to function</li>
<li>Bump version to 18.1.8</li>
</ul>
<p>Emil Velikov (1):</p>
<ul>
<li>docs: update required mako version</li>
</ul>
<p>Grazvydas Ignotas (1):</p>
<ul>
<li>radv: place pointer length into cache uuid</li>
</ul>
<p>Gurchetan Singh (2):</p>
<ul>
<li>meson: fix egl build for surfaceless</li>
<li>meson: fix egl build for android</li>
</ul>
<p>Ian Romanick (2):</p>
<ul>
<li>i965/vec4: Clamp indirect tes input array reads with 0x0fffffff</li>
<li>i965/vec4: Correctly handle uniform sources in generate_tes_add_indirect_urb_offset</li>
</ul>
<p>Jason Ekstrand (5):</p>
<ul>
<li>anv: Fill holes in the VF VUE to zero</li>
<li>nir/algebraic: Be more careful converting ushr to extract_u8/16</li>
<li>egl/dri2: Add a helper for the number of planes for a FOURCC format</li>
<li>egl/dri2: Guard against invalid fourcc formats</li>
<li>anv/blorp: Do more flushing around HiZ clears</li>
</ul>
<p>Juan A. Suarez Romero (1):</p>
<ul>
<li>egl/wayland: do not leak wl_buffer when it is locked</li>
</ul>
<p>Lionel Landwerlin (1):</p>
<ul>
<li>anv: blorp: support multiple aspect blits</li>
</ul>
<p>Marek Olšák (1):</p>
<ul>
<li>glapi: actually implement GL_EXT_robustness for GLES</li>
</ul>
<p>Nanley Chery (7):</p>
<ul>
<li>intel/isl: Avoid tiling some 16K-wide render targets</li>
<li>i965: Make blt_pitch public</li>
<li>i965/miptree: Drop an if case from retile_as_linear</li>
<li>i965/miptree: Use the correct BLT pitch</li>
<li>i965/miptree: Use miptree_map in map_blit functions</li>
<li>i965/miptree: Fix can_blit_slice()</li>
<li>i965/gen7_urb: Re-emit PUSH_CONSTANT_ALLOC on some gen9</li>
</ul>
<p>Samuel Pitoiset (1):</p>
<ul>
<li>radv: fix passing clip/cull distances from VS to PS</li>
</ul>
<p>vadym.shovkoplias (1):</p>
<ul>
<li>glsl/linker: Allow unused in blocks which are not declated on previous stage</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=103241">Bug 103241</a> - Anv crashes when using 64-bit vertex inputs</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104926">Bug 104926</a> - swrast: Mesa 17.3.3 produces: HW cursor for format 875713089 not supported</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107280">Bug 107280</a> - [DXVK] Batman: Arkham City with tessellation enabled hangs on SKL GT4</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107772">Bug 107772</a> - Mesa preprocessor matches if(def)s & endifs incorrectly</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107779">Bug 107779</a> - Access violation with some games</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107810">Bug 107810</a> - The 'va_end' call is missed after 'va_copy' in 'util_vsnprintf' function under windows</li>
</ul>
<h2>Changes</h2>
<p>Andrii Simiklit (4):</p>
<ul>
<li>apple/glx/log: added missing va_end() after va_copy()</li>
<li>mesa/util: don't use the same 'va_list' instance twice</li>
<li>mesa/util: don't ignore NULL returned from 'malloc'</li>
<li>mesa/util: add missing va_end() after va_copy()</li>
</ul>
<p>Bas Nieuwenhuizen (4):</p>
<ul>
<li>radv: Use build ID if available for cache UUID.</li>
<li>radv: Only allow 16 user SGPRs for compute on GFX9+.</li>
<li>radv: Set the user SGPR MSB for Vega.</li>
<li>radv: Fix driver UUID SHA1 init.</li>
</ul>
<p>Christopher Egert (1):</p>
<ul>
<li>radeon: fix ColorMask</li>
</ul>
<p>Dave Airlie (1):</p>
<ul>
<li>virgl: don't send a shader create with no data. (v2)</li>
</ul>
<p>Dylan Baker (10):</p>
<ul>
<li>docs/relnotes: Add sha256 sums for mesa 18.1.8</li>
<li>cherry-ignore: Add additional 18.2 patch</li>
<li>meson: Print a message about why a libdrm version was selected</li>
<li>cherry-ignore: add another 18.2 patch</li>
<li>cherry-ignore: Add patches that don't apply cleanly and are for developer tools</li>
<li>cherry-ignore: Add more 18.2 patches</li>
<li>cherry-ignore: add 18.2 patchs</li>
<li>cherry-ignore: add a patch that was reverted on master</li>
<li>cherry-ignore: one final update</li>
<li>Bump version to 18.1.9</li>
</ul>
<p>Erik Faye-Lund (2):</p>
<ul>
<li>winsys/virgl: avoid unintended behavior</li>
<li>virgl: adjust strides when mapping temp-resources</li>
</ul>
<p>Gert Wollny (1):</p>
<ul>
<li>winsys/virgl: correct resource and handle allocation (v2)</li>
</ul>
<p>Jason Ekstrand (6):</p>
<ul>
<li>anv/pipeline: Only consider double elements which actually exist</li>
<li>i965: Workaround the gen9 hw astc5x5 sampler bug</li>
<li>anv: Re-emit vertex buffers when the pipeline changes</li>
<li>anv: Disable the vertex cache when tessellating on SKL GT4</li>
<li>anv: Clamp scissors to the framebuffer boundary</li>
<li>anv/query: Write both dwords in emit_zero_queries</li>
</ul>
<p>Josh Pieper (1):</p>
<ul>
<li>st/mesa: Validate the result of pipe_transfer_map in make_texture (v2)</li>
</ul>
<p>Kenneth Feng (1):</p>
<ul>
<li>amd: Add Picasso device id</li>
</ul>
<p>Marek Olšák (4):</p>
<ul>
<li>st/mesa: help fix stencil border color for GL_DEPTH_STENCIL textures</li>
<li>radeonsi: fix HTILE for NPOT textures with mipmapping on SI/CI</li>
<li>r600: fix HTILE for NPOT textures with mipmapping</li>
<li>radeonsi: fix printing a BO list into ddebug reports</li>
</ul>
<p>Mathias Fröhlich (1):</p>
<ul>
<li>tnl: Fix green gun regression in xonotic.</li>
</ul>
<p>Mauro Rossi (3):</p>
<ul>
<li>android: broadcom/genxml: fix collision with intel/genxml header-gen macro</li>
<li>android: broadcom/cle: add gallium include path</li>
<li>android: broadcom/cle: export the broadcom top level path headers</li>
</ul>
<p>Michal Srb (1):</p>
<ul>
<li>st/dri: don't set queryDmaBufFormats/queryDmaBufModifiers if the driver does not implement it</li>
</ul>
<p>Michel Dänzer (1):</p>
<ul>
<li>loader/dri3: Only wait for back buffer fences in dri3_get_buffer</li>
@@ -59,9 +60,217 @@ Note: some of the new features are only available with certain drivers.
<li>GL_ARB_sample_locations and GL_NV_sample_locations on nvc0 (GM200+)</li>
<li>GL_ANDROID_extension_pack_es31a on radeonsi.</li>
<li>GL_KHR_texture_compression_astc_ldr on radeonsi</li>
<li>GL_NV_conservative_raster and GL_NV_conservative_raster_dilate on nvc0 (GM200+)</li>
<li>GL_NV_conservative_raster_pre_snap_triangles on nvc0 (GP102+)</li>
<li>multisampled images on nvc0 (GM107+) (now supported on GF100+)</li>
</ul>
<h2>Bug fixes</h2>
<ul>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=13728">Bug 13728</a> - [G965] Some objects in Neverwinter Nights Linux version not displayed correctly</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=61761">Bug 61761</a> - glPolygonOffsetEXT, OFFSET_BIAS incorrectly set to a huge number</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=65422">Bug 65422</a> - Rename api_validate.[ch] to draw_validate.[ch]</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=78097">Bug 78097</a> - glUniform1ui and friends not supported by display lists</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=99116">Bug 99116</a> - Wine DirectDraw programs showing only a blackscreen when using Mesa Gallium drivers</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=99730">Bug 99730</a> - Metro Redux game(s) needs override for midshader extension declaration</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=100177">Bug 100177</a> - [GM206] Misrendering in XCOM Ennemy Within</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=100430">Bug 100430</a> - [radv] graphical glitches on dolphin emulator</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=101247">Bug 101247</a> - Mesa fails to link GLSL programs with unused output blocks</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=102678">Bug 102678</a> - gl_BaseVertex should always be zero when the draw command has no <basevertex> parameter</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=103274">Bug 103274</a> - BRW allocates too much heap memory</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104388">Bug 104388</a> - [snb] GPU HANG: ecode 6:0:0x85fffff8 in fgfs</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104809">Bug 104809</a> - anv: DOOM 2016 and Wolfenstein II:The New Colossus crash due to not having depthBoundsTest</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105351">Bug 105351</a> - [Gen6+] piglit's arb_shader_image_load_store-host-mem-barrier fails with a glGetTexSubImage fallback path</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105374">Bug 105374</a> - texture3d, a SaschaWillems demo, assert fails</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105396">Bug 105396</a> - tc compatible htile sets depth of htiles of discarded fragments to 1.0</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105399">Bug 105399</a> - [snb] GPU hang: after geometry shader emits no geometry, the program hangs</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105497">Bug 105497</a> - shader-db crashes on 72 core system after ast_type_qualifier bitset change</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105613">Bug 105613</a> - Compute shader locks up within nested "for" loop</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105731">Bug 105731</a> - linker error "fragment shader input ... has no matching output in the previous stage" when previous stage's output declaration in a separate shader object</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105904">Bug 105904</a> - Needed to delete mesa shader cache after driver upgrade for 32 bit wine vulkan programs to work.</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106133">Bug 106133</a> - make check "OSError: [Errno 24] Too many open files"</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106163">Bug 106163</a> - r600/sb: optimizer tries to schedule access to different array elements in one instruction group</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106174">Bug 106174</a> - vulkan dota2 broken (segfaulting), found bug commit</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106180">Bug 106180</a> - [bisected] radv vulkan smoke test black screen (Add support for DRI3 v1.2)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106232">Bug 106232</a> - LLVM unit tests have error in random number handling</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106243">Bug 106243</a> - [kbl] GPU HANG: 9:0:0x85dffffb, in Cinnamon</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106315">Bug 106315</a> - The witness + dxvk suffers flickering garbage</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106331">Bug 106331</a> - radv doesnt support VK_FORMAT_R32G32B32_SFLOAT</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106499">Bug 106499</a> - [regression, bisected] Several games crash on start</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106504">Bug 106504</a> - vulkan SPIR-V parsing failed at ../src/compiler/spirv/vtn_cfg.c:381</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106511">Bug 106511</a> - radv: MSAA broken on SI (assertion failure in vkCreateImage)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106587">Bug 106587</a> - Dota2 is very dark when using vulkan render on a Intel << AMD prime setup</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106594">Bug 106594</a> - [regression,apitrace,bisected] Prison Architect rendered unplayable by multicoloured flickering triangles and overlayed triangles when performing certain actions</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106642">Bug 106642</a> - X server crashes in i965 on desktop startup when DRI3 v1.2 / modifier support is enabled</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106643">Bug 106643</a> - double free when exporting a temporarily imported semaphore</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106673">Bug 106673</a> - [bisected] Steam is unusable since commit 5c33e8c7</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106687">Bug 106687</a> - radv: Fast color clears use incorrect format</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106708">Bug 106708</a> - [SKL/KBL/GLK] 2-3% performance drop in SynMark DrvState and 5-9% drop on SynMark Multithread</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106748">Bug 106748</a> - st/mesa: use PIPE_CAP_GLSL_FEATURE_LEVEL_COMPATIBILITY broke qemu -display sdl,gl=on</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106756">Bug 106756</a> - Wine 3.9 crashes with DXVK on Just Cause 3 and Quantum Break on VEGA but works ON POLARIS</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106774">Bug 106774</a> - GLSL IR copy propagates loads of SSBOs</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106776">Bug 106776</a> - vma_random unrecognized command line option "-std=c++11"</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106778">Bug 106778</a> - Files missing from tarball - intel_sanitize_gpu.*</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106779">Bug 106779</a> - Files missing from tarball - u_debug_stack_android.cpp</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106784">Bug 106784</a> - 18.1.1 autotools build fail without mako</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106801">Bug 106801</a> - vma_random_test.cpp:239:18: error: non-constant-expression cannot be narrowed from type 'unsigned long' to 'uint_fast32_t' (aka 'unsigned int') in initializer list [-Wc++11-narrowing]</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106810">Bug 106810</a> - ProgramBinary does not switch program correctly when using transform feedback</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106823">Bug 106823</a> - Failed to recongnize keyword of shader code</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106830">Bug 106830</a> - [bisected] 32 bit tests (deqp, piglit, glcts, vulkancts) crashing on all platforms</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106861">Bug 106861</a> - fatal error: wayland-egl-backend.h: No such file or directory compilation terminated.</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106903">Bug 106903</a> - radv: Fragment shader output goes to wrong attachments when render targets are sparse</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106906">Bug 106906</a> - Failed to recongnize keyword “sampler2DRect” and "sampler2DRectShadow"</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106907">Bug 106907</a> - Correct Transform Feedback Varyings information is expected after using ProgramBinary</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106928">Bug 106928</a> - When starting a match Rocket League crashes on "Go"</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106941">Bug 106941</a> - Intel ANV vulkan driver exposing version 1.1.0 which is incorrect</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106986">Bug 106986</a> - glGetQueryiv error when querying number of result bits for GL_ANY_SAMPLES_PASSED_CONSERVATIVE</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106997">Bug 106997</a> - [Regression]. Dying light game is crashing on latest mesa</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107098">Bug 107098</a> - Segfault after munmap(kms_sw_dt->ro_mapped)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107117">Bug 107117</a> - mesa-18.1: regression with TFP on intel with modesettings and glamor acceleration</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107190">Bug 107190</a> - Got seg fault on snb when use INTEL_DEBUG=bat</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107212">Bug 107212</a> - Dual-Core CPU E5500 / G45: RetroArch with reicast core results in corrupted graphics</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107223">Bug 107223</a> - [GEN9+] 50% perf drop in SynMark Fill* tests (E2E RBC gets disabled?)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107248">Bug 107248</a> - [G45 ILK G965] Texture handling broken</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107275">Bug 107275</a> - NIR segfaults after spirv-opt</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107276">Bug 107276</a> - radv: OpBitfieldUExtract returns incorrect result when count is zero</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107295">Bug 107295</a> - Access violation on glDrawArrays with count >= 2048</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107305">Bug 107305</a> - glsl/opt_copy_propagation_elements.cpp:72:9: error: delegating constructors are permitted only in C++11</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107312">Bug 107312</a> - Mesa-git RPM build fails after commit 8cacf38f527d42e41441ef8c25d95d4b2f4e8602</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107359">Bug 107359</a> - [Regression] [bisected] [OpenGL CTS] [SKL,BDW] KHR-GL46.texture_barrier*-texels, GTF-GL46.gtf21.GL2FixedTests.buffer_corners.buffer_corners, and GTF-GL46.gtf21.GL2FixedTests.stencil_plane_corners.stencil_plane_corners fail with some configuration</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107366">Bug 107366</a> - NIR verification crashes on piglit tests</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107443">Bug 107443</a> - Build error on arm64: v3d_decoder.c:837:17: error: format not a string literal and no format arguments [-Werror=format-security]</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107460">Bug 107460</a> - radv: OpControlBarrier does not always work correctly (bisected)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107477">Bug 107477</a> - [DXVK] Setting high shader quality in GTA V results in LLVM error</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107510">Bug 107510</a> - [GEN8+] up to 10% perf drop on several 3D benchmarks</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107544">Bug 107544</a> - intel/decoder: out of bounds group_iter</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107550">Bug 107550</a> - "0[2]" as function parameter hits assert</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107579">Bug 107579</a> - [SNB] The graphic corruption when we reuse the GS compiled and used for TFB when statebuffer contain magic trash in the unused space</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107601">Bug 107601</a> - Rise of the Tomb Raider Segmentation Fault when the game starts</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107610">Bug 107610</a> - Dolphin emulator mis-renders shadow overlay in Super Mario Sunshine</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=103241">Bug 103241</a> - Anv crashes when using 64-bit vertex inputs</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107280">Bug 107280</a> - [DXVK] Batman: Arkham City with tessellation enabled hangs on SKL GT4</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107772">Bug 107772</a> - Mesa preprocessor matches if(def)s & endifs incorrectly</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107779">Bug 107779</a> - Access violation with some games</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107810">Bug 107810</a> - The 'va_end' call is missed after 'va_copy' in 'util_vsnprintf' function under windows</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107832">Bug 107832</a> - Gallium picking A16L16 formats when emulating INTENSITY16 conflicts with mesa</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107843">Bug 107843</a> - 32bit Mesa build failes with meson.</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107879">Bug 107879</a> - crash happens when link program</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107891">Bug 107891</a> - [wine, regression, bisected] RAGE, Wolfenstein The New Order hangs in menu</li>
</ul>
<h2>Changes</h2>
<p>Andres Gomez (3):</p>
<ul>
<li>docs: add sha256 checksums for 18.2.0</li>
<li>Revert "Revert "glsl: skip stringification in preprocessor if in unreachable branch""</li>
<li>cherry-ignore: i965/tools: 32bit compilation with meson</li>
</ul>
<p>Andrii Simiklit (4):</p>
<ul>
<li>apple/glx/log: added missing va_end() after va_copy()</li>
<li>mesa/util: don't use the same 'va_list' instance twice</li>
<li>mesa/util: don't ignore NULL returned from 'malloc'</li>
<li>mesa/util: add missing va_end() after va_copy()</li>
</ul>
<p>Bas Nieuwenhuizen (5):</p>
<ul>
<li>radv: Support v3 of VK_EXT_vertex_attribute_divisor.</li>
<li>radv: Set the user SGPR MSB for Vega.</li>
<li>radv: Only allow 16 user SGPRs for compute on GFX9+.</li>
<li>radv: Use build ID if available for cache UUID.</li>
<li>radv: Fix driver UUID SHA1 init.</li>
</ul>
<p>Christopher Egert (1):</p>
<ul>
<li>radeon: fix ColorMask</li>
</ul>
<p>Dave Airlie (1):</p>
<ul>
<li>virgl: don't send a shader create with no data. (v2)</li>
</ul>
<p>Dylan Baker (1):</p>
<ul>
<li>meson: Print a message about why a libdrm version was selected</li>
</ul>
<p>Eric Anholt (2):</p>
<ul>
<li>v3d: Fix SRC_ALPHA_SATURATE blending for RTs without alpha.</li>
<li>v3d: Fix setup of the VCM cache size.</li>
</ul>
<p>Erik Faye-Lund (2):</p>
<ul>
<li>winsys/virgl: avoid unintended behavior</li>
<li>virgl: adjust strides when mapping temp-resources</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104602">Bug 104602</a> - [apitrace] Graphical artifacts in Civilization VI on RX Vega</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104926">Bug 104926</a> - swrast: Mesa 17.3.3 produces: HW cursor for format 875713089 not supported</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107276">Bug 107276</a> - radv: OpBitfieldUExtract returns incorrect result when count is zero</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107786">Bug 107786</a> - [DXVK] MSAA reflections are broken in GTA V</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=108024">Bug 108024</a> - [Debian Stretch]Fail to build because "xcb_randr_lease_t"</li>
</ul>
<h2>Changes</h2>
<p>Alex Deucher (1):</p>
<ul>
<li>pci_ids: add new polaris pci id</li>
</ul>
<p>Andres Rodriguez (1):</p>
<ul>
<li>radv: only emit ZPASS_DONE for timestamp queries on gfx queues</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=99507">Bug 99507</a> - Corrupted frame contents with Vulkan version of DOTA2, Talos Principle and Sascha Willems' demos when they're run Vsynched in fullscreen</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107857">Bug 107857</a> - GPU hang - GS_EMIT without shader outputs</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107926">Bug 107926</a> - [anv] Rise of the Tomb Raider always misrendering, segfault and gpu hang.</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=108012">Bug 108012</a> - Compiler crashes on access of non-existent member incremental operations</li>
</ul>
<h2>Changes</h2>
<p>Boyuan Zhang (1):</p>
<ul>
<li>st/va: use provided sizes and coords for vlVaGetImage</li>
</ul>
<p>Dave Airlie (1):</p>
<ul>
<li>anv: add missing unlock in error path.</li>
</ul>
<p>Dylan Baker (1):</p>
<ul>
<li>meson: Don't allow building EGL on Windows or MacOS</li>
</ul>
<p>Emil Velikov (5):</p>
<ul>
<li>st/nine: do not double-close the fd on teardown</li>
<li>egl: make eglSwapInterval a no-op for !window surfaces</li>
<li>egl: make eglSwapBuffers* a no-op for !window surfaces</li>
<li>vl/dri3: do full teardown on screen_destroy</li>
<li>Revert "mesa: remove unnecessary 'sort by year' for the GL extensions"</li>
</ul>
<p>Eric Engestrom (1):</p>
<ul>
<li>radv: add missing meson c++ visibility arguments</li>
</ul>
<p>Fritz Koenig (1):</p>
<ul>
<li>i965: Replace checks for rb->Name with FlipY (v2)</li>
</ul>
<p>Gert Wollny (1):</p>
<ul>
<li>virgl, vtest: Correct the transfer size calculation</li>
</ul>
<p>Ilia Mirkin (4):</p>
<ul>
<li>glsl: fix array assignments of a swizzled vector</li>
<li>nv50,nvc0: mark RGBX_UINT formats as renderable</li>
<li>nv50,nvc0: guard against zero-size blits</li>
<li>nvc0: fix blitting red to srgb8_alpha</li>
</ul>
<p>Jason Ekstrand (7):</p>
<ul>
<li>nir/cf: Remove phi sources if needed in nir_handle_add_jump</li>
<li>anv: Use separate MOCS settings for external BOs</li>
<li>intel/fs: Fix a typo in need_matching_subreg_offset</li>
<li>nir/from_ssa: Don't rewrite derefs destinations to registers</li>
<li>anv/batch_chain: Don't start a new BO just for BATCH_BUFFER_START</li>
<li>nir/alu_to_scalar: Use ssa_for_alu_src in hand-rolled expansions</li>
<li>intel: Don't propagate conditional modifiers if a UD source is negated</li>
</ul>
<p>Juan A. Suarez Romero (2):</p>
<ul>
<li>docs: add sha256 checksums for 18.2.2</li>
<li>Update version to 18.2.3</li>
</ul>
<p>Józef Kucia (1):</p>
<ul>
<li>radeonsi: avoid sending GS_EMIT in shaders without outputs</li>
</ul>
<p>Marek Olšák (1):</p>
<ul>
<li>drirc: add a workaround for ARMA 3</li>
</ul>
<p>Samuel Pitoiset (1):</p>
<ul>
<li>radv: add a workaround for a VGT hang with prim restart and strips</li>
</ul>
<p>Tapani Pälli (1):</p>
<ul>
<li>glsl: do not attempt assignment if operand type not parsed correctly</li>
</ul>
<p>Timothy Arceri (11):</p>
<ul>
<li>glsl: ignore trailing whitespace when define redefined</li>
<li>util: disable cache if we have no build-id and timestamp is zero</li>
<li>util: rename timestamp param in disk_cache_create()</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105731">Bug 105731</a> - linker error "fragment shader input ... has no matching output in the previous stage" when previous stage's output declaration in a separate shader object</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107511">Bug 107511</a> - KHR/khrplatform.h not always installed when needed</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107626">Bug 107626</a> - [SNB] The graphical corruption and GPU hang occur sometimes on the piglit test "arb_texture_multisample-large-float-texture" with parameter --fp16</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107626">Bug 107626</a> - [SNB] The graphical corruption and GPU hang occur sometimes on the piglit test "arb_texture_multisample-large-float-texture" with parameter --fp16</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107856">Bug 107856</a> - i965 incorrectly calculates the number of layers for texture views (assert)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106577">Bug 106577</a> - broken rendering with nine and nouveau (GM107)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=108245">Bug 108245</a> - RADV/Vega: Low mip levels of large BCn textures get corrupted by vkCmdCopyBufferToImage</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=108311">Bug 108311</a> - Query buffer object support is broken on r600.</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=108894">Bug 108894</a> - [anv] vkCmdCopyBuffer() and vkCmdCopyQueryPoolResults() write-after-write hazard</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=108909">Bug 108909</a> - Vkd3d test failure test_resolve_non_issued_query_data()</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=108914">Bug 108914</a> - blocky shadow artifacts in The Forest with DXVK, RADV_DEBUG=nohiz fixes this</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=108925">Bug 108925</a> - vkCmdCopyQueryPoolResults(VK_QUERY_RESULT_WAIT_BIT) for timestamps with large query count hangs</li>
</ul>
<h2>Changes</h2>
<p>Alex Smith (1):</p>
<ul>
<li>radv: Flush before vkCmdWriteTimestamp() if needed</li>
</ul>
<p>Bas Nieuwenhuizen (4):</p>
<ul>
<li>radv: Align large buffers to the fragment size.</li>
<li>radv: Clamp gfx9 image view extents to the allocated image extents.</li>
<li>radv/android: Mark android WSI image as shareable.</li>
<li>radv/android: Use buffer metadata to determine scanout compat.</li>
</ul>
<p>Dave Airlie (2):</p>
<ul>
<li>r600: make suballocator 256-bytes align</li>
<li>radv: use 3d shader for gfx9 copies if dst is 3d</li>
</ul>
<p>Emil Velikov (2):</p>
<ul>
<li>egl/wayland: bail out when drmGetMagic fails</li>
<li>egl/wayland: plug memory leak in drm_handle_device()</li>
</ul>
<p>Eric Anholt (3):</p>
<ul>
<li>v3d: Fix a leak of the transfer helper on screen destroy.</li>
<li>vc4: Fix a leak of the transfer helper on screen destroy.</li>
<li>v3d: Fix a leak of the disassembled instruction string during debug dumps.</li>
</ul>
<p>Eric Engestrom (3):</p>
<ul>
<li>anv: correctly use vulkan 1.0 by default</li>
<li>wsi/display: fix mem leak when freeing swapchains</li>
<li>vulkan/wsi: fix s/,/;/ typo</li>
</ul>
<p>Gurchetan Singh (3):</p>
<ul>
<li>virgl: quadruple command buffer size</li>
<li>virgl: avoid large inline transfers</li>
<li>virgl: don't mark buffers as unclean after a write</li>
Note: some of the new features are only available with certain drivers.
</p>
<ul>
<li>GL_AMD_depth_clamp_separate on r600, radeonsi.</li>
<li>GL_AMD_framebuffer_multisample_advanced on radeonsi.</li>
<li>GL_AMD_gpu_shader_int64 on i965, nvc0, radeonsi.</li>
<li>GL_AMD_multi_draw_indirect on all GL 4.x drivers.</li>
<li>GL_AMD_query_buffer_object on i965, nvc0, r600, radeonsi.</li>
<li>GL_EXT_disjoint_timer_query on radeonsi and most other Gallium drivers (ES extension)</li>
<li>GL_EXT_texture_compression_s3tc on all drivers (ES extension)<li>
<li>GL_EXT_vertex_attrib_64bit on i965, nvc0, radeonsi.</li>
<li>GL_EXT_window_rectangles on radeonsi.</li>
<li>GL_KHR_texture_compression_astc_sliced_3d on radeonsi.</li>
<li>GL_NV_fragment_shader_interlock on i965.</li>
<li>EGL_EXT_device_base for all drivers.</li>
<li>EGL_EXT_device_drm for all drivers.</li>
<li>EGL_MESA_device_software for all drivers.</li>
</ul>
<h2>Bug fixes</h2>
<ul>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=13728">Bug 13728</a> - [G965] Some objects in Neverwinter Nights Linux version not displayed correctly</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=99507">Bug 99507</a> - Corrupted frame contents with Vulkan version of DOTA2, Talos Principle and Sascha Willems' demos when they're run Vsynched in fullscreen</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=99730">Bug 99730</a> - Metro Redux game(s) needs override for midshader extension declaration</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=101247">Bug 101247</a> - Mesa fails to link GLSL programs with unused output blocks</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=102597">Bug 102597</a> - [Regression] mpv, high rendering times (two to three times higher)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=103241">Bug 103241</a> - Anv crashes when using 64-bit vertex inputs</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104602">Bug 104602</a> - [apitrace] Graphical artifacts in Civilization VI on RX Vega</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104809">Bug 104809</a> - anv: DOOM 2016 and Wolfenstein II:The New Colossus crash due to not having depthBoundsTest</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=104926">Bug 104926</a> - swrast: Mesa 17.3.3 produces: HW cursor for format 875713089 not supported</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105333">Bug 105333</a> - [gallium-nine] missing geometry after commit ac: replace ac_build_kill with ac_build_kill_if_false</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105731">Bug 105731</a> - linker error "fragment shader input ... has no matching output in the previous stage" when previous stage's output declaration in a separate shader object</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=105904">Bug 105904</a> - Needed to delete mesa shader cache after driver upgrade for 32 bit wine vulkan programs to work.</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106231">Bug 106231</a> - llvmpipe blends produce bad code after llvm patch https://reviews.llvm.org/D44785</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106283">Bug 106283</a> - Shader replacements works only for limited use cases</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106577">Bug 106577</a> - broken rendering with nine and nouveau (GM107)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106833">Bug 106833</a> - glLinkProgram is expected to fail when vertex attribute aliasing happens on ES3.0 context or later</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106980">Bug 106980</a> - Basemark GPU vulkan benchmark hangs on GFX9</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=106997">Bug 106997</a> - [Regression]. Dying light game is crashing on latest mesa</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107088">Bug 107088</a> - [GEN8+] Hang when discarding a fragment if dual source blending is enabled but shader doesn't support it</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107098">Bug 107098</a> - Segfault after munmap(kms_sw_dt->ro_mapped)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107212">Bug 107212</a> - Dual-Core CPU E5500 / G45: RetroArch with reicast core results in corrupted graphics</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107223">Bug 107223</a> - [GEN9+] 50% perf drop in SynMark Fill* tests (E2E RBC gets disabled?)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107276">Bug 107276</a> - radv: OpBitfieldUExtract returns incorrect result when count is zero</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107280">Bug 107280</a> - [DXVK] Batman: Arkham City with tessellation enabled hangs on SKL GT4</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107313">Bug 107313</a> - Meson instructions on web site are non-optimal</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107359">Bug 107359</a> - [Regression] [bisected] [OpenGL CTS] [SKL,BDW] KHR-GL46.texture_barrier*-texels, GTF-GL46.gtf21.GL2FixedTests.buffer_corners.buffer_corners, and GTF-GL46.gtf21.GL2FixedTests.stencil_plane_corners.stencil_plane_corners fail with some configuration</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107460">Bug 107460</a> - radv: OpControlBarrier does not always work correctly (bisected)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107477">Bug 107477</a> - [DXVK] Setting high shader quality in GTA V results in LLVM error</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107579">Bug 107579</a> - [SNB] The graphic corruption when we reuse the GS compiled and used for TFB when statebuffer contain magic trash in the unused space</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107601">Bug 107601</a> - Rise of the Tomb Raider Segmentation Fault when the game starts</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107610">Bug 107610</a> - Dolphin emulator mis-renders shadow overlay in Super Mario Sunshine</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107626">Bug 107626</a> - [SNB] The graphical corruption and GPU hang occur sometimes on the piglit test "arb_texture_multisample-large-float-texture" with parameter --fp16</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107734">Bug 107734</a> - [GLSL] glsl-fface-invariant, glsl-fcoord-invariant and glsl-pcoord-invariant should fail</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107760">Bug 107760</a> - GPU Hang when Playing DiRT 3 Complete Edition using Steam Play with DXVK</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107765">Bug 107765</a> - [regression] Batman Arkham City crashes with DXVK under wine</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107772">Bug 107772</a> - Mesa preprocessor matches if(def)s & endifs incorrectly</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107779">Bug 107779</a> - Access violation with some games</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107786">Bug 107786</a> - [DXVK] MSAA reflections are broken in GTA V</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107806">Bug 107806</a> - glsl_get_natural_size_align_bytes() ABORT with GfxBench Vulkan AztecRuins</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107810">Bug 107810</a> - The 'va_end' call is missed after 'va_copy' in 'util_vsnprintf' function under windows</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107832">Bug 107832</a> - Gallium picking A16L16 formats when emulating INTENSITY16 conflicts with mesa</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107843">Bug 107843</a> - 32bit Mesa build failes with meson.</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107856">Bug 107856</a> - i965 incorrectly calculates the number of layers for texture views (assert)</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107857">Bug 107857</a> - GPU hang - GS_EMIT without shader outputs</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107865">Bug 107865</a> - swr fail to build with llvm-libs 6.0.1</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107869">Bug 107869</a> - u_thread.h:87:4: error: use of undeclared identifier 'cpu_set_t'</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107870">Bug 107870</a> - Undefined symbols for architecture x86_64: "_util_cpu_caps"</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107879">Bug 107879</a> - crash happens when link program</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107891">Bug 107891</a> - [wine, regression, bisected] RAGE, Wolfenstein The New Order hangs in menu</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107923">Bug 107923</a> - build_id.c:126: multiple definition of `build_id_length'</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107926">Bug 107926</a> - [anv] Rise of the Tomb Raider always misrendering, segfault and gpu hang.</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=107941">Bug 107941</a> - GPU hang and system crash with Dota 2 using Vulkan</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=108012">Bug 108012</a> - Compiler crashes on access of non-existent member incremental operations</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=108024">Bug 108024</a> - [Debian Stretch]Fail to build because "xcb_randr_lease_t"</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=108164">Bug 108164</a> - [radv] VM faults since 5d6a560a2986c9ab421b3c7904d29bb7bc35e36f</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=108245">Bug 108245</a> - RADV/Vega: Low mip levels of large BCn textures get corrupted by vkCmdCopyBufferToImage</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=108894">Bug 108894</a> - [anv] vkCmdCopyBuffer() and vkCmdCopyQueryPoolResults() write-after-write hazard</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=108909">Bug 108909</a> - Vkd3d test failure test_resolve_non_issued_query_data()</li>
<li><ahref="https://bugs.freedesktop.org/show_bug.cgi?id=108914">Bug 108914</a> - blocky shadow artifacts in The Forest with DXVK, RADV_DEBUG=nohiz fixes this</li>
Mesa 19.0.0 is a new development release. People who are concerned
with stability and reliability should stick with a previous release or
wait for Mesa 19.0.1.
</p>
<p>
Mesa 19.0.0 implements the OpenGL 4.5 API, but the version reported by
glGetString(GL_VERSION) or glGetIntegerv(GL_MAJOR_VERSION) /
glGetIntegerv(GL_MINOR_VERSION) depends on the particular driver being used.
Some drivers don't support all the features required in OpenGL 4.5. OpenGL
4.5 is <strong>only</strong> available if requested at context creation.
Compatibility contexts may report a lower version depending on each driver.
</p>
<h2>SHA256 checksums</h2>
<pre>
TBD.
</pre>
<h2>New features</h2>
<ul>
<li>GL_AMD_texture_texture4 on all GL 4.0 drivers.</li>
<li>GL_EXT_shader_implicit_conversions on all drivers (ES extension).</li>
<li>GL_EXT_texture_compression_bptc on all GL 4.0 drivers (ES extension).</li>
<li>GL_EXT_texture_compression_rgtc on all GL 3.0 drivers (ES extension).</li>
<li>GL_EXT_render_snorm on gallium drivers (ES extension).</li>
<li>GL_EXT_texture_view on drivers supporting texture views (ES extension).</li>
<li>GL_OES_texture_view on drivers supporting texture views (ES extension).</li>
<li>GL_NV_shader_atomic_float on nvc0 (Fermi/Kepler only).</li>
<li>Shader-based software implementations of GL_ARB_gpu_shader_fp64, GL_ARB_gpu_shader_int64, GL_ARB_vertex_attrib_64bit, and GL_ARB_shader_ballot on i965.</li>
<li>VK_ANDROID_external_memory_android_hardware_buffer on Intel</li>
<li>Fixed and re-exposed VK_EXT_pci_bus_info on Intel and RADV</li>
<li>VK_EXT_scalar_block_layout on Intel and RADV</li>
With the Fall 2018 Workstation 15 / Fusion 11 releases, additional
features are supported in the driver:
<ul>
<li>Multisample antialiasing (2x, 4x)
<li>GL_ARB/AMD_draw_buffers_blend
<li>GL_ARB_sample_shading
<li>GL_ARB_texture_cube_map_array
<li>GL_ARB_texture_gather
<li>GL_ARB_texture_query_lod
<li>GL_EXT/OES_draw_buffers_indexed
</ul>
<p>
This requires version 2.15.0 or later of the vmwgfx kernel module and
the VM must be configured for hardware version 16 or later.
</p>
<p>
OpenGL 3.3 support can be disabled by setting the environment variable
SVGA_VGPU10=0.
@@ -126,7 +143,7 @@ Begin by saving your current directory location:
<ul>
<li>Mesa/Gallium master branch. This code is used to build libGL, and the direct rendering svga driver for libGL, vmwgfx_dri.so, and the X acceleration library libxatracker.so.x.x.x.
<li>VMware Linux guest kernel module. Note that this repo contains the complete DRM and TTM code. The vmware-specific driver is really only the files prefixed with vmwgfx.
<pre>
@@ -136,7 +153,7 @@ Begin by saving your current directory location:
Most distros ship with this but it's safest to install a newer version.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
