Update version to 19.1.0-rc5

Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>

.editorconfig

@@ -32,17 +32,9 @@ indent_size = 2
 indent_style = space
 indent_size = 2
 
-[*.html]
-indent_style = space
-indent_size = 2
-
-[*.rst]
-indent_style = space
-indent_size = 3
-
 [*.patch]
 trim_trailing_whitespace = false
 
-[{meson.build,meson_options.txt}]
+[meson.build,meson_options.txt]
 indent_style = space
 indent_size = 2

.gitattributes

@@ -1,6 +1,4 @@
-*.csv eol=crlf
-* text=auto
-*.jpg binary
-*.png binary
-*.gif binary
-*.ico binary
+*.dsp -crlf
+*.dsw -crlf
+*.sln -crlf
+*.vcproj -crlf

.gitignore

@@ -1,4 +1,2 @@
 *.pyc
 *.pyo
-*.out
-build

.gitlab-ci/all-skips.txt

@@ -1,20 +0,0 @@
-# Note: skips lists for CI are just a list of lines that, when
-# non-zero-length and not starting with '#', will regex match to
-# delete lines from the test list.  Be careful.
-
-# These are tremendously slow (pushing toward a minute), and aren't
-# reliable to be run in parallel with other tests due to CPU-side timing.
-dEQP-GLES[0-9]*.functional.flush_finish.*
-
-# https://gitlab.freedesktop.org/mesa/mesa/-/issues/4575
-dEQP-VK.wsi.display.get_display_plane_capabilities
-
-# piglit: WGL is Windows-only
-wgl@.*
-
-# These are sensitive to CPU timing, and would need to be run in isolation
-# on the system rather than in parallel with other tests.
-glx@glx_arb_sync_control@timing.*
-
-# This test is not built with waffle, while we do build tests with waffle
-spec@!opengl 1.1@windowoverlap

.gitlab-ci/bare-metal/.editorconfig

@@ -1,2 +0,0 @@
-[*.sh]
-indent_size = 2

.gitlab-ci/bare-metal/arm64_a630_egl.sh

@@ -1,26 +0,0 @@
-#!/bin/sh
-
-# This test script groups together a bunch of fast dEQP variant runs
-# to amortize the cost of rebooting the board.
-
-set -ex
-
-EXIT=0
-
-# Run reset tests without parallelism:
-if ! env \
-  DEQP_RESULTS_DIR=results/reset \
-  FDO_CI_CONCURRENT=1 \
-  DEQP_CASELIST_FILTER='.*reset.*' \
-  /install/deqp-runner.sh; then
-    EXIT=1
-fi
-
-# Then run everything else with parallelism:
-if ! env \
-  DEQP_RESULTS_DIR=results/nonrobustness \
-  DEQP_CASELIST_INV_FILTER='.*reset.*' \
-  /install/deqp-runner.sh; then
-    EXIT=1
-fi
-

.gitlab-ci/bare-metal/bm-init.sh

@@ -1,13 +0,0 @@
-#!/bin/sh
-
-# Init entrypoint for bare-metal devices; calls common init code.
-
-# First stage: very basic setup to bring up network and /dev etc
-/init-stage1.sh
-
-# Second stage: run jobs
-test $? -eq 0 && /init-stage2.sh
-
-# Wait until the job would have timed out anyway, so we don't spew a "init
-# exited" panic.
-sleep 6000

.gitlab-ci/bare-metal/cros-servo.sh

@@ -1,101 +0,0 @@
-#!/bin/bash
-
-# Boot script for Chrome OS devices attached to a servo debug connector, using
-# NFS and TFTP to boot.
-
-# We're run from the root of the repo, make a helper var for our paths
-BM=$CI_PROJECT_DIR/install/bare-metal
-CI_COMMON=$CI_PROJECT_DIR/install/common
-
-# Runner config checks
-if [ -z "$BM_SERIAL" ]; then
-  echo "Must set BM_SERIAL in your gitlab-runner config.toml [[runners]] environment"
-  echo "This is the CPU serial device."
-  exit 1
-fi
-
-if [ -z "$BM_SERIAL_EC" ]; then
-  echo "Must set BM_SERIAL in your gitlab-runner config.toml [[runners]] environment"
-  echo "This is the EC serial device for controlling board power"
-  exit 1
-fi
-
-if [ ! -d /nfs ]; then
-  echo "NFS rootfs directory needs to be mounted at /nfs by the gitlab runner"
-  exit 1
-fi
-
-if [ ! -d /tftp ]; then
-  echo "TFTP directory for this board needs to be mounted at /tftp by the gitlab runner"
-  exit 1
-fi
-
-# job config checks
-if [ -z "$BM_KERNEL" ]; then
-  echo "Must set BM_KERNEL to your board's kernel FIT image"
-  exit 1
-fi
-
-if [ -z "$BM_ROOTFS" ]; then
-  echo "Must set BM_ROOTFS to your board's rootfs directory in the job's variables"
-  exit 1
-fi
-
-if [ -z "$BM_CMDLINE" ]; then
-  echo "Must set BM_CMDLINE to your board's kernel command line arguments"
-  exit 1
-fi
-
-set -ex
-
-# Clear out any previous run's artifacts.
-rm -rf results/
-mkdir -p results
-
-# Create the rootfs in the NFS directory.  rm to make sure it's in a pristine
-# state, since it's volume-mounted on the host.
-rsync -a --delete $BM_ROOTFS/ /nfs/
-mkdir -p /nfs/results
-. $BM/rootfs-setup.sh /nfs
-
-# Put the kernel/dtb image and the boot command line in the tftp directory for
-# the board to find.  For normal Mesa development, we build the kernel and
-# store it in the docker container that this script is running in.
-#
-# However, container builds are expensive, so when you're hacking on the
-# kernel, it's nice to be able to skip the half hour container build and plus
-# moving that container to the runner.  So, if BM_KERNEL is a URL, fetch it
-# instead of looking in the container.  Note that the kernel build should be
-# the output of:
-#
-# make Image.lzma
-#
-# mkimage \
-#  -A arm64 \
-#  -f auto \
-#  -C lzma \
-#  -d arch/arm64/boot/Image.lzma \
-#  -b arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dtb \
-#  cheza-image.img
-
-rm -rf /tftp/*
-if echo "$BM_KERNEL" | grep -q http; then
-  apt install -y wget
-  wget $BM_KERNEL -O /tftp/vmlinuz
-else
-  cp $BM_KERNEL /tftp/vmlinuz
-fi
-echo "$BM_CMDLINE" > /tftp/cmdline
-
-set +e
-python3 $BM/cros_servo_run.py \
-        --cpu $BM_SERIAL \
-        --ec $BM_SERIAL_EC
-ret=$?
-set -e
-
-# Bring artifacts back from the NFS dir to the build dir where gitlab-runner
-# will look for them.
-cp -Rp /nfs/results/. results/
-
-exit $ret

.gitlab-ci/bare-metal/cros_servo_run.py

@@ -1,194 +0,0 @@
-
-#!/usr/bin/env python3
-#
-# Copyright © 2020 Google LLC
-#
-# Permission is hereby granted, free of charge, to any person obtaining a
-# copy of this software and associated documentation files (the "Software"),
-# to deal in the Software without restriction, including without limitation
-# the rights to use, copy, modify, merge, publish, distribute, sublicense,
-# and/or sell copies of the Software, and to permit persons to whom the
-# Software is furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice (including the next
-# paragraph) shall be included in all copies or substantial portions of the
-# Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
-# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
-# IN THE SOFTWARE.
-
-import argparse
-import queue
-import re
-from serial_buffer import SerialBuffer
-import sys
-import threading
-
-
-class CrosServoRun:
-    def __init__(self, cpu, ec):
-        # Merged FIFO for the two serial buffers, fed by threads.
-        self.serial_queue = queue.Queue()
-        self.sentinel = object()
-        self.threads_done = 0
-
-        self.ec_ser = SerialBuffer(
-            ec, "results/serial-ec.txt", "R SERIAL-EC> ")
-        self.cpu_ser = SerialBuffer(
-            cpu, "results/serial.txt", "R SERIAL-CPU> ")
-
-        self.iter_feed_ec = threading.Thread(
-            target=self.iter_feed_queue, daemon=True, args=(self.ec_ser.lines(),))
-        self.iter_feed_ec.start()
-
-        self.iter_feed_cpu = threading.Thread(
-            target=self.iter_feed_queue, daemon=True, args=(self.cpu_ser.lines(),))
-        self.iter_feed_cpu.start()
-
-    def close(self):
-        self.ec_ser.close()
-        self.cpu_ser.close()
-        self.iter_feed_ec.join()
-        self.iter_feed_cpu.join()
-
-    # Feed lines from our serial queues into the merged queue, marking when our
-    # input is done.
-    def iter_feed_queue(self, it):
-        for i in it:
-            self.serial_queue.put(i)
-        self.serial_queue.put(self.sentinel)
-
-    # Return the next line from the queue, counting how many threads have
-    # terminated and joining when done
-    def get_serial_queue_line(self):
-        line = self.serial_queue.get()
-        if line == self.sentinel:
-            self.threads_done = self.threads_done + 1
-            if self.threads_done == 2:
-                self.iter_feed_cpu.join()
-                self.iter_feed_ec.join()
-        return line
-
-    # Returns an iterator for getting the next line.
-    def serial_queue_lines(self):
-        return iter(self.get_serial_queue_line, self.sentinel)
-
-    def ec_write(self, s):
-        print("W SERIAL-EC> %s" % s)
-        self.ec_ser.serial.write(s.encode())
-
-    def cpu_write(self, s):
-        print("W SERIAL-CPU> %s" % s)
-        self.cpu_ser.serial.write(s.encode())
-
-    def print_error(self, message):
-        RED = '\033[0;31m'
-        NO_COLOR = '\033[0m'
-        print(RED + message + NO_COLOR)
-
-    def run(self):
-        # Flush any partial commands in the EC's prompt, then ask for a reboot.
-        self.ec_write("\n")
-        self.ec_write("reboot\n")
-
-        # This is emitted right when the bootloader pauses to check for input.
-        # Emit a ^N character to request network boot, because we don't have a
-        # direct-to-netboot firmware on cheza.
-        for line in self.serial_queue_lines():
-            if re.search("load_archive: loading locale_en.bin", line):
-                self.cpu_write("\016")
-                break
-
-            # The Cheza boards have issues with failing to bring up power to
-            # the system sometimes, possibly dependent on ambient temperature
-            # in the farm.
-            if re.search("POWER_GOOD not seen in time", line):
-                self.print_error("Detected intermittent poweron failure, restarting run...")
-                return 2
-
-        tftp_failures = 0
-        for line in self.serial_queue_lines():
-            if re.search("---. end Kernel panic", line):
-                return 1
-
-            # The Cheza firmware seems to occasionally get stuck looping in
-            # this error state during TFTP booting, possibly based on amount of
-            # network traffic around it, but it'll usually recover after a
-            # reboot.
-            if re.search("R8152: Bulk read error 0xffffffbf", line):
-                tftp_failures += 1
-                if tftp_failures >= 100:
-                    self.print_error("Detected intermittent tftp failure, restarting run...")
-                    return 2
-
-            # There are very infrequent bus errors during power management transitions
-            # on cheza, which we don't expect to be the case on future boards.
-            if re.search("Kernel panic - not syncing: Asynchronous SError Interrupt", line):
-                self.print_error("Detected cheza power management bus error, restarting run...")
-                return 2
-
-            # If the network device dies, it's probably not graphics's fault, just try again.
-            if re.search("NETDEV WATCHDOG", line):
-                self.print_error(
-                    "Detected network device failure, restarting run...")
-                return 2
-
-            # These HFI response errors started appearing with the introduction
-            # of piglit runs.  CosmicPenguin says:
-            #
-            # "message ID 106 isn't a thing, so likely what happened is that we
-            # got confused when parsing the HFI queue.  If it happened on only
-            # one run, then memory corruption could be a possible clue"
-            #
-            # Given that it seems to trigger randomly near a GPU fault and then
-            # break many tests after that, just restart the whole run.
-            if re.search("a6xx_hfi_send_msg.*Unexpected message id .* on the response queue", line):
-                self.print_error("Detected cheza power management bus error, restarting run...")
-                return 2
-
-            if re.search("coreboot.*bootblock starting", line):
-                self.print_error(
-                    "Detected spontaneous reboot, restarting run...")
-                return 2
-
-            result = re.search("hwci: mesa: (\S*)", line)
-            if result:
-                if result.group(1) == "pass":
-                    return 0
-                else:
-                    return 1
-
-        self.print_error("Reached the end of the CPU serial log without finding a result")
-        return 1
-
-
-def main():
-    parser = argparse.ArgumentParser()
-    parser.add_argument('--cpu', type=str,
-                        help='CPU Serial device', required=True)
-    parser.add_argument(
-        '--ec', type=str, help='EC Serial device', required=True)
-    args = parser.parse_args()
-
-    servo = CrosServoRun(args.cpu, args.ec)
-
-    while True:
-        retval = servo.run()
-        if retval != 2:
-            break
-
-    # power down the CPU on the device
-    servo.ec_write("power off\n")
-
-    servo.close()
-
-    sys.exit(retval)
-
-
-if __name__ == '__main__':
-    main()

.gitlab-ci/bare-metal/eth008-power-down.sh

@@ -1,10 +0,0 @@
-#!/bin/bash
-
-relay=$1
-
-if [ -z "$relay" ]; then
-    echo "Must supply a relay arg"
-    exit 1
-fi
-
-$CI_PROJECT_DIR/install/bare-metal/eth008-power-relay.py $ETH_HOST $ETH_PORT off $relay

.gitlab-ci/bare-metal/eth008-power-relay.py

@@ -1,28 +0,0 @@
-#!/usr/bin/python3
-
-import sys
-import socket
-
-host = sys.argv[1]
-port = sys.argv[2]
-mode = sys.argv[3]
-relay = sys.argv[4]
-msg = None
-
-if mode == "on":
-    msg = b'\x20'
-else:
-    msg = b'\x21'
-
-msg += int(relay).to_bytes(1, 'big')
-msg += b'\x00'
-
-c = socket.create_connection((host, int(port)))
-c.sendall(msg)
-
-data = c.recv(1)
-c.close()
-
-if data[0] == b'\x01':
-    print('Command failed')
-    sys.exit(1)

.gitlab-ci/bare-metal/eth008-power-up.sh

@@ -1,12 +0,0 @@
-#!/bin/bash
-
-relay=$1
-
-if [ -z "$relay" ]; then
-    echo "Must supply a relay arg"
-    exit 1
-fi
-
-$CI_PROJECT_DIR/install/bare-metal/eth008-power-relay.py $ETH_HOST $ETH_PORT off $relay
-sleep 5
-$CI_PROJECT_DIR/install/bare-metal/eth008-power-relay.py $ETH_HOST $ETH_PORT on $relay

.gitlab-ci/bare-metal/expect-output.sh

@@ -1,30 +0,0 @@
-#!/bin/bash
-
-set -e
-
-STRINGS=$(mktemp)
-ERRORS=$(mktemp)
-
-trap "rm $STRINGS; rm $ERRORS;" EXIT
-
-FILE=$1
-shift 1
-
-while getopts "f:e:" opt; do
-  case $opt in
-    f) echo "$OPTARG" >> $STRINGS;;
-    e) echo "$OPTARG" >> $STRINGS ; echo "$OPTARG" >> $ERRORS;;
-  esac
-done
-shift $((OPTIND -1))
-
-echo "Waiting for $FILE to say one of following strings"
-cat $STRINGS
-
-while ! egrep -wf $STRINGS $FILE; do
-  sleep 2
-done
-
-if egrep -wf $ERRORS $FILE; then
-  exit 1
-fi

.gitlab-ci/bare-metal/fastboot.sh

@@ -1,148 +0,0 @@
-#!/bin/bash
-
-BM=$CI_PROJECT_DIR/install/bare-metal
-CI_COMMON=$CI_PROJECT_DIR/install/common
-
-if [ -z "$BM_SERIAL" -a -z "$BM_SERIAL_SCRIPT" ]; then
-  echo "Must set BM_SERIAL OR BM_SERIAL_SCRIPT in your gitlab-runner config.toml [[runners]] environment"
-  echo "BM_SERIAL:"
-  echo "  This is the serial device to talk to for waiting for fastboot to be ready and logging from the kernel."
-  echo "BM_SERIAL_SCRIPT:"
-  echo "  This is a shell script to talk to for waiting for fastboot to be ready and logging from the kernel."
-  exit 1
-fi
-
-if [ -z "$BM_POWERUP" ]; then
-  echo "Must set BM_POWERUP in your gitlab-runner config.toml [[runners]] environment"
-  echo "This is a shell script that should reset the device and begin its boot sequence"
-  echo "such that it pauses at fastboot."
-  exit 1
-fi
-
-if [ -z "$BM_POWERDOWN" ]; then
-  echo "Must set BM_POWERDOWN in your gitlab-runner config.toml [[runners]] environment"
-  echo "This is a shell script that should power off the device."
-  exit 1
-fi
-
-if [ -z "$BM_FASTBOOT_SERIAL" ]; then
-  echo "Must set BM_FASTBOOT_SERIAL in your gitlab-runner config.toml [[runners]] environment"
-  echo "This must be the a stable-across-resets fastboot serial number."
-  exit 1
-fi
-
-if [ -z "$BM_KERNEL" ]; then
-  echo "Must set BM_KERNEL to your board's kernel vmlinuz or Image.gz in the job's variables:"
-  exit 1
-fi
-
-if [ -z "$BM_DTB" ]; then
-  echo "Must set BM_DTB to your board's DTB file in the job's variables:"
-  exit 1
-fi
-
-if [ -z "$BM_ROOTFS" ]; then
-  echo "Must set BM_ROOTFS to your board's rootfs directory in the job's variables:"
-  exit 1
-fi
-
-if echo $BM_CMDLINE | grep -q "root=/dev/nfs"; then
-  BM_FASTBOOT_NFSROOT=1
-fi
-
-set -ex
-
-# Clear out any previous run's artifacts.
-rm -rf results/
-mkdir -p results/
-
-if [ -n "$BM_FASTBOOT_NFSROOT" ]; then
-  # Create the rootfs in the NFS directory.  rm to make sure it's in a pristine
-  # state, since it's volume-mounted on the host.
-  rsync -a --delete $BM_ROOTFS/ /nfs/
-  mkdir -p /nfs/results
-  . $BM/rootfs-setup.sh /nfs
-
-  # Root on NFS, no need for an inintramfs.
-  rm -f rootfs.cpio.gz
-  touch rootfs.cpio
-  gzip rootfs.cpio
-else
-  # Create the rootfs in a temp dir
-  rsync -a --delete $BM_ROOTFS/ rootfs/
-  . $BM/rootfs-setup.sh rootfs
-
-  # Finally, pack it up into a cpio rootfs.  Skip the vulkan CTS since none of
-  # these devices use it and it would take up space in the initrd.
-
-  if [ -n "$PIGLIT_PROFILES" ]; then
-    EXCLUDE_FILTER="deqp|arb_gpu_shader5|arb_gpu_shader_fp64|arb_gpu_shader_int64|glsl-4.[0123456]0|arb_tessellation_shader"
-  else
-    EXCLUDE_FILTER="piglit|python"
-  fi
-
-  pushd rootfs
-  find -H | \
-    egrep -v "external/(openglcts|vulkancts|amber|glslang|spirv-tools)" |
-    egrep -v "traces-db|apitrace|renderdoc" | \
-    egrep -v $EXCLUDE_FILTER | \
-    cpio -H newc -o | \
-    xz --check=crc32 -T4 - > $CI_PROJECT_DIR/rootfs.cpio.gz
-  popd
-fi
-
-# Make the combined kernel image and dtb for passing to fastboot.  For normal
-# Mesa development, we build the kernel and store it in the docker container
-# that this script is running in.
-#
-# However, container builds are expensive, so when you're hacking on the
-# kernel, it's nice to be able to skip the half hour container build and plus
-# moving that container to the runner.  So, if BM_KERNEL+BM_DTB are URLs,
-# fetch them instead of looking in the container.
-if echo "$BM_KERNEL $BM_DTB" | grep -q http; then
-  apt install -y wget
-
-  wget $BM_KERNEL -O kernel
-  wget $BM_DTB -O dtb
-
-  cat kernel dtb > Image.gz-dtb
-  rm kernel dtb
-else
-  cat $BM_KERNEL $BM_DTB > Image.gz-dtb
-fi
-
-mkdir -p artifacts
-abootimg \
-  --create artifacts/fastboot.img \
-  -k Image.gz-dtb \
-  -r rootfs.cpio.gz \
-  -c cmdline="$BM_CMDLINE"
-rm Image.gz-dtb
-
-export PATH=$BM:$PATH
-
-# Start background command for talking to serial if we have one.
-if [ -n "$BM_SERIAL_SCRIPT" ]; then
-  $BM_SERIAL_SCRIPT > results/serial-output.txt &
-
-  while [ ! -e results/serial-output.txt ]; do
-    sleep 1
-  done
-fi
-
-set +e
-$BM/fastboot_run.py \
-  --dev="$BM_SERIAL" \
-  --fbserial="$BM_FASTBOOT_SERIAL" \
-  --powerup="$BM_POWERUP" \
-  --powerdown="$BM_POWERDOWN"
-ret=$?
-set -e
-
-if [ -n "$BM_FASTBOOT_NFSROOT" ]; then
-  # Bring artifacts back from the NFS dir to the build dir where gitlab-runner
-  # will look for them.
-  cp -Rp /nfs/results/. results/
-fi
-
-exit $ret

.gitlab-ci/bare-metal/fastboot_run.py

@@ -1,146 +0,0 @@
-#!/usr/bin/env python3
-#
-# Copyright © 2020 Google LLC
-#
-# Permission is hereby granted, free of charge, to any person obtaining a
-# copy of this software and associated documentation files (the "Software"),
-# to deal in the Software without restriction, including without limitation
-# the rights to use, copy, modify, merge, publish, distribute, sublicense,
-# and/or sell copies of the Software, and to permit persons to whom the
-# Software is furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice (including the next
-# paragraph) shall be included in all copies or substantial portions of the
-# Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
-# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
-# IN THE SOFTWARE.
-
-import argparse
-import os
-import re
-from serial_buffer import SerialBuffer
-import sys
-import threading
-
-class FastbootRun:
-    def __init__(self, args):
-        self.powerup = args.powerup
-        # We would like something like a 1 minute timeout, but the piglit traces
-        # jobs stall out for long periods of time.
-        self.ser = SerialBuffer(args.dev, "results/serial-output.txt", "R SERIAL> ", timeout=600)
-        self.fastboot="fastboot boot -s {ser} artifacts/fastboot.img".format(ser=args.fbserial)
-
-    def close(self):
-        self.ser.close()
-
-    def print_error(self, message):
-        RED = '\033[0;31m'
-        NO_COLOR = '\033[0m'
-        print(RED + message + NO_COLOR)
-
-    def logged_system(self, cmd):
-        print("Running '{}'".format(cmd))
-        return os.system(cmd)
-
-    def run(self):
-        if self.logged_system(self.powerup) != 0:
-            return 1
-
-        fastboot_ready = False
-        for line in self.ser.lines():
-            if re.search("fastboot: processing commands", line) or \
-                re.search("Listening for fastboot command on", line):
-                fastboot_ready = True
-                break
-
-            if re.search("data abort", line):
-                self.print_error("Detected crash during boot, restarting run...")
-                return 2
-
-        if not fastboot_ready:
-            self.print_error("Failed to get to fastboot prompt, restarting run...")
-            return 2
-
-        if self.logged_system(self.fastboot) != 0:
-            return 1
-
-        print_more_lines = -1
-        for line in self.ser.lines():
-            if print_more_lines == 0:
-                return 2
-            if print_more_lines > 0:
-                print_more_lines -= 1
-
-            if re.search("---. end Kernel panic", line):
-                return 1
-
-            # The db820c boards intermittently reboot.  Just restart the run
-            # when if we see a reboot after we got past fastboot.
-            if re.search("PON REASON", line):
-                self.print_error("Detected spontaneous reboot, restarting run...")
-                return 2
-
-            # db820c sometimes wedges around iommu fault recovery
-            if re.search("watchdog: BUG: soft lockup - CPU.* stuck", line):
-                self.print_error(
-                    "Detected kernel soft lockup, restarting run...")
-                return 2
-
-            # If the network device dies, it's probably not graphics's fault, just try again.
-            if re.search("NETDEV WATCHDOG", line):
-                self.print_error(
-                    "Detected network device failure, restarting run...")
-                return 2
-
-            # A3xx recovery doesn't quite work. Sometimes the GPU will get
-            # wedged and recovery will fail (because power can't be reset?)
-            # This assumes that the jobs are sufficiently well-tested that GPU
-            # hangs aren't always triggered, so just try again. But print some
-            # more lines first so that we get better information on the cause
-            # of the hang. Once a hang happens, it's pretty chatty.
-            if "[drm:adreno_recover] *ERROR* gpu hw init failed: -22" in line:
-                self.print_error(
-                    "Detected GPU hang, restarting run...")
-                if print_more_lines == -1:
-                    print_more_lines = 30
-
-            result = re.search("hwci: mesa: (\S*)", line)
-            if result:
-                if result.group(1) == "pass":
-                    return 0
-                else:
-                    return 1
-
-        self.print_error("Reached the end of the CPU serial log without finding a result, restarting run...")
-        return 2
-
-def main():
-    parser = argparse.ArgumentParser()
-    parser.add_argument('--dev', type=str, help='Serial device (otherwise reading from serial-output.txt)')
-    parser.add_argument('--powerup', type=str, help='shell command for rebooting', required=True)
-    parser.add_argument('--powerdown', type=str, help='shell command for powering off', required=True)
-    parser.add_argument('--fbserial', type=str, help='fastboot serial number of the board', required=True)
-    args = parser.parse_args()
-
-    fastboot = FastbootRun(args)
-
-    while True:
-        retval = fastboot.run()
-        fastboot.close()
-        if retval != 2:
-            break
-
-        fastboot = FastbootRun(args)
-
-    fastboot.logged_system(args.powerdown)
-
-    sys.exit(retval)
-
-if __name__ == '__main__':
-    main()

.gitlab-ci/bare-metal/google-power-down.sh

@@ -1,10 +0,0 @@
-#!/bin/bash
-
-relay=$1
-
-if [ -z "$relay" ]; then
-    echo "Must supply a relay arg"
-    exit 1
-fi
-
-$CI_PROJECT_DIR/install/bare-metal/google-power-relay.py off $relay

.gitlab-ci/bare-metal/google-power-relay.py

@@ -1,19 +0,0 @@
-#!/usr/bin/python3
-
-import sys
-import serial
-
-mode = sys.argv[1]
-relay = sys.argv[2]
-
-# our relays are "off" means "board is powered".
-mode_swap = {
-     "on" : "off",
-     "off" : "on",
-}
-mode = mode_swap[mode]
-
-ser = serial.Serial('/dev/ttyACM0', 115200, timeout=2)
-command = "relay {} {}\n\r".format(mode, relay)
-ser.write(command.encode())
-ser.close()

.gitlab-ci/bare-metal/google-power-up.sh

@@ -1,12 +0,0 @@
-#!/bin/bash
-
-relay=$1
-
-if [ -z "$relay" ]; then
-    echo "Must supply a relay arg"
-    exit 1
-fi
-
-$CI_PROJECT_DIR/install/bare-metal/google-power-relay.py off $relay
-sleep 5
-$CI_PROJECT_DIR/install/bare-metal/google-power-relay.py on $relay

.gitlab-ci/bare-metal/poe-off

@@ -1,17 +0,0 @@
-#!/bin/bash
-
-if [ -z "$BM_POE_INTERFACE" ]; then
-    echo "Must supply the PoE Interface to power up"
-    exit 1
-fi
-
-if [ -z "$BM_POE_ADDRESS" ]; then
-    echo "Must supply the PoE Switch host"
-    exit 1
-fi
-
-SNMP_KEY="SNMPv2-SMI::mib-2.105.1.1.1.3.1.`expr 48 + $BM_POE_INTERFACE`"
-SNMP_ON="i 1"
-SNMP_OFF="i 2"
-
-flock /var/run/poe.lock -c "snmpset -v2c -r 3 -t 30 -cmesaci $BM_POE_ADDRESS $SNMP_KEY $SNMP_OFF"

.gitlab-ci/bare-metal/poe-on

@@ -1,19 +0,0 @@
-#!/bin/bash
-
-if [ -z "$BM_POE_INTERFACE" ]; then
-    echo "Must supply the PoE Interface to power up"
-    exit 1
-fi
-
-if [ -z "$BM_POE_ADDRESS" ]; then
-    echo "Must supply the PoE Switch host"
-    exit 1
-fi
-
-SNMP_KEY="SNMPv2-SMI::mib-2.105.1.1.1.3.1.`expr 48 + $BM_POE_INTERFACE`"
-SNMP_ON="i 1"
-SNMP_OFF="i 2"
-
-flock /var/run/poe.lock -c "snmpset -v2c -r 3 -t 30 -cmesaci $BM_POE_ADDRESS $SNMP_KEY $SNMP_OFF"
-sleep 3s
-flock /var/run/poe.lock -c "snmpset -v2c -r 3 -t 30 -cmesaci $BM_POE_ADDRESS $SNMP_KEY $SNMP_ON"

.gitlab-ci/bare-metal/poe-powered.sh

@@ -1,147 +0,0 @@
-#!/bin/bash
-
-# Boot script for devices attached to a PoE switch, using NFS for the root
-# filesystem.
-
-# We're run from the root of the repo, make a helper var for our paths
-BM=$CI_PROJECT_DIR/install/bare-metal
-CI_COMMON=$CI_PROJECT_DIR/install/common
-
-# Runner config checks
-if [ -z "$BM_SERIAL" ]; then
-  echo "Must set BM_SERIAL in your gitlab-runner config.toml [[runners]] environment"
-  echo "This is the serial port to listen the device."
-  exit 1
-fi
-
-if [ -z "$BM_POE_ADDRESS" ]; then
-  echo "Must set BM_POE_ADDRESS in your gitlab-runner config.toml [[runners]] environment"
-  echo "This is the PoE switch address to connect for powering up/down devices."
-  exit 1
-fi
-
-if [ -z "$BM_POE_USERNAME" ]; then
-  echo "Must set BM_POE_USERNAME in your gitlab-runner config.toml [[runners]] environment"
-  echo "This is the PoE switch username."
-  exit 1
-fi
-
-if [ -z "$BM_POE_PASSWORD" ]; then
-  echo "Must set BM_POE_PASSWORD in your gitlab-runner config.toml [[runners]] environment"
-  echo "This is the PoE switch password."
-  exit 1
-fi
-
-if [ -z "$BM_POE_INTERFACE" ]; then
-  echo "Must set BM_POE_INTERFACE in your gitlab-runner config.toml [[runners]] environment"
-  echo "This is the PoE switch interface where the device is connected."
-  exit 1
-fi
-
-if [ -z "$BM_POWERUP" ]; then
-  echo "Must set BM_POWERUP in your gitlab-runner config.toml [[runners]] environment"
-  echo "This is a shell script that should power up the device and begin its boot sequence."
-  exit 1
-fi
-
-if [ -z "$BM_POWERDOWN" ]; then
-  echo "Must set BM_POWERDOWN in your gitlab-runner config.toml [[runners]] environment"
-  echo "This is a shell script that should power off the device."
-  exit 1
-fi
-
-if [ ! -d /nfs ]; then
-  echo "NFS rootfs directory needs to be mounted at /nfs by the gitlab runner"
-  exit 1
-fi
-
-if [ ! -d /tftp ]; then
-  echo "TFTP directory for this board needs to be mounted at /tftp by the gitlab runner"
-  exit 1
-fi
-
-# job config checks
-if [ -z "$BM_ROOTFS" ]; then
-  echo "Must set BM_ROOTFS to your board's rootfs directory in the job's variables"
-  exit 1
-fi
-
-if [ -z "$BM_BOOTFS" ]; then
-  echo "Must set /boot files for the TFTP boot in the job's variables"
-  exit 1
-fi
-
-if [ -z "$BM_CMDLINE" ]; then
-  echo "Must set BM_CMDLINE to your board's kernel command line arguments"
-  exit 1
-fi
-
-if [ -z "$BM_BOOTCONFIG" ]; then
-  echo "Must set BM_BOOTCONFIG to your board's required boot configuration arguments"
-  exit 1
-fi
-
-set -ex
-
-# Clear out any previous run's artifacts.
-rm -rf results/
-mkdir -p results
-
-# Create the rootfs in the NFS directory.  rm to make sure it's in a pristine
-# state, since it's volume-mounted on the host.
-rsync -a --delete $BM_ROOTFS/ /nfs/
-
-# If BM_BOOTFS is an URL, download it
-if echo $BM_BOOTFS | grep -q http; then
-  apt install -y wget
-  wget ${FDO_HTTP_CACHE_URI:-}$BM_BOOTFS -O /tmp/bootfs.tar
-  BM_BOOTFS=/tmp/bootfs.tar
-fi
-
-# If BM_BOOTFS is a file, assume it is a tarball and uncompress it
-if [ -f $BM_BOOTFS ]; then
-  mkdir -p /tmp/bootfs
-  tar xf $BM_BOOTFS -C /tmp/bootfs
-  BM_BOOTFS=/tmp/bootfs
-fi
-
-# Install kernel modules (it could be either in /lib/modules or
-# /usr/lib/modules, but we want to install in the latter)
-[ -d $BM_BOOTFS/usr/lib/modules ] && rsync -a --delete $BM_BOOTFS/usr/lib/modules/ /nfs/usr/lib/modules/
-[ -d $BM_BOOTFS/lib/modules ] && rsync -a --delete $BM_BOOTFS/lib/modules/ /nfs/usr/lib/modules/
-
-# Install kernel image + bootloader files
-rsync -a --delete $BM_BOOTFS/boot/ /tftp/
-
-# Create the rootfs in the NFS directory
-mkdir -p /nfs/results
-. $BM/rootfs-setup.sh /nfs
-
-echo "$BM_CMDLINE" > /tftp/cmdline.txt
-
-# Add some required options in config.txt
-printf "$BM_BOOTCONFIG" >> /tftp/config.txt
-
-set +e
-ATTEMPTS=2
-while [ $((ATTEMPTS--)) -gt 0 ]; do
-  python3 $BM/poe_run.py \
-          --dev="$BM_SERIAL" \
-          --powerup="$BM_POWERUP" \
-          --powerdown="$BM_POWERDOWN" \
-          --timeout="${BM_POE_TIMEOUT:-60}"
-  ret=$?
-
-  if [ $ret -eq 2 ]; then
-    echo "Did not detect boot sequence, retrying..."
-  else
-    ATTEMPTS=0
-  fi
-done
-set -e
-
-# Bring artifacts back from the NFS dir to the build dir where gitlab-runner
-# will look for them.
-cp -Rp /nfs/results/. results/
-
-exit $ret

.gitlab-ci/bare-metal/poe_run.py

@@ -1,96 +0,0 @@
-#!/usr/bin/env python3
-#
-# Copyright © 2020 Igalia, S.L.
-#
-# Permission is hereby granted, free of charge, to any person obtaining a
-# copy of this software and associated documentation files (the "Software"),
-# to deal in the Software without restriction, including without limitation
-# the rights to use, copy, modify, merge, publish, distribute, sublicense,
-# and/or sell copies of the Software, and to permit persons to whom the
-# Software is furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice (including the next
-# paragraph) shall be included in all copies or substantial portions of the
-# Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
-# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
-# IN THE SOFTWARE.
-
-import argparse
-import os
-import re
-from serial_buffer import SerialBuffer
-import sys
-import threading
-
-class PoERun:
-    def __init__(self, args):
-        self.powerup = args.powerup
-        self.powerdown = args.powerdown
-        self.ser = SerialBuffer(args.dev, "results/serial-output.txt", "", args.timeout)
-
-    def print_error(self, message):
-        RED = '\033[0;31m'
-        NO_COLOR = '\033[0m'
-        print(RED + message + NO_COLOR)
-
-    def logged_system(self, cmd):
-        print("Running '{}'".format(cmd))
-        return os.system(cmd)
-
-    def run(self):
-        if self.logged_system(self.powerup) != 0:
-            return 1
-
-        boot_detected = False
-        for line in self.ser.lines():
-            if re.search("Booting Linux", line):
-                boot_detected = True
-                break
-
-        if not boot_detected:
-            self.print_error("Something wrong; couldn't detect the boot start up sequence")
-            return 2
-
-        for line in self.ser.lines():
-            if re.search("---. end Kernel panic", line):
-                return 1
-
-            # Binning memory problems
-            if re.search("binner overflow mem", line):
-                self.print_error("Memory overflow in the binner; GPU hang")
-                return 1
-
-            result = re.search("hwci: mesa: (\S*)", line)
-            if result:
-                if result.group(1) == "pass":
-                    return 0
-                else:
-                    return 1
-
-        self.print_error("Reached the end of the CPU serial log without finding a result")
-        return 2
-
-def main():
-    parser = argparse.ArgumentParser()
-    parser.add_argument('--dev', type=str, help='Serial device to monitor', required=True)
-    parser.add_argument('--powerup', type=str, help='shell command for rebooting', required=True)
-    parser.add_argument('--powerdown', type=str, help='shell command for powering off', required=True)
-    parser.add_argument('--timeout', type=int, default=60,
-                        help='time in seconds to wait for activity', required=False)
-    args = parser.parse_args()
-
-    poe = PoERun(args)
-    retval = poe.run()
-
-    poe.logged_system(args.powerdown)
-
-    sys.exit(retval)
-
-if __name__ == '__main__':
-    main()

.gitlab-ci/bare-metal/rootfs-setup.sh

@@ -1,29 +0,0 @@
-#!/bin/bash
-
-rootfs_dst=$1
-
-mkdir -p $rootfs_dst/results
-
-# Set up the init script that brings up the system.
-cp $BM/bm-init.sh $rootfs_dst/init
-cp $CI_COMMON/init*.sh $rootfs_dst/
-
-# Make JWT token available as file in the bare-metal storage to enable access
-# to MinIO
-cp "${CI_JOB_JWT_FILE}" "${rootfs_dst}${CI_JOB_JWT_FILE}"
-
-cp $CI_COMMON/capture-devcoredump.sh $rootfs_dst/
-
-set +x
-
-# Pass through relevant env vars from the gitlab job to the baremetal init script
-"$CI_COMMON"/generate-env.sh > $rootfs_dst/set-job-env-vars.sh
-chmod +x $rootfs_dst/set-job-env-vars.sh
-echo "Variables passed through:"
-cat $rootfs_dst/set-job-env-vars.sh
-
-set -x
-
-# Add the Mesa drivers we built, and make a consistent symlink to them.
-mkdir -p $rootfs_dst/$CI_PROJECT_DIR
-rsync -aH --delete $CI_PROJECT_DIR/install/ $rootfs_dst/$CI_PROJECT_DIR/install/

.gitlab-ci/bare-metal/serial_buffer.py

@@ -1,162 +0,0 @@
-#!/usr/bin/env python3
-#
-# Copyright © 2020 Google LLC
-#
-# Permission is hereby granted, free of charge, to any person obtaining a
-# copy of this software and associated documentation files (the "Software"),
-# to deal in the Software without restriction, including without limitation
-# the rights to use, copy, modify, merge, publish, distribute, sublicense,
-# and/or sell copies of the Software, and to permit persons to whom the
-# Software is furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice (including the next
-# paragraph) shall be included in all copies or substantial portions of the
-# Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
-# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
-# IN THE SOFTWARE.
-
-import argparse
-from datetime import datetime, timezone
-import queue
-import serial
-import threading
-import time
-
-class SerialBuffer:
-    def __init__(self, dev, filename, prefix, timeout = None):
-        self.filename = filename
-        self.dev = dev
-
-        if dev:
-            self.f = open(filename, "wb+")
-            self.serial = serial.Serial(dev, 115200, timeout=timeout)
-        else:
-            self.f = open(filename, "rb")
-            self.serial = None
-
-        self.byte_queue = queue.Queue()
-        self.line_queue = queue.Queue()
-        self.prefix = prefix
-        self.timeout = timeout
-        self.sentinel = object()
-        self.closing = False
-
-        if self.dev:
-            self.read_thread = threading.Thread(
-                target=self.serial_read_thread_loop, daemon=True)
-        else:
-            self.read_thread = threading.Thread(
-                target=self.serial_file_read_thread_loop, daemon=True)
-        self.read_thread.start()
-
-        self.lines_thread = threading.Thread(
-            target=self.serial_lines_thread_loop, daemon=True)
-        self.lines_thread.start()
-
-    def close(self):
-        self.closing = True
-        if self.serial:
-            self.serial.cancel_read()
-        self.read_thread.join()
-        self.lines_thread.join()
-        if self.serial:
-            self.serial.close()
-
-    # Thread that just reads the bytes from the serial device to try to keep from
-    # buffer overflowing it. If nothing is received in 1 minute, it finalizes.
-    def serial_read_thread_loop(self):
-        greet = "Serial thread reading from %s\n" % self.dev
-        self.byte_queue.put(greet.encode())
-
-        while not self.closing:
-            try:
-                b = self.serial.read()
-                if len(b) == 0:
-                    break
-                self.byte_queue.put(b)
-            except Exception as err:
-                print(self.prefix + str(err))
-                break
-        self.byte_queue.put(self.sentinel)
-
-    # Thread that just reads the bytes from the file of serial output that some
-    # other process is appending to.
-    def serial_file_read_thread_loop(self):
-        greet = "Serial thread reading from %s\n" % self.filename
-        self.byte_queue.put(greet.encode())
-
-        while not self.closing:
-            line = self.f.readline()
-            if line:
-                self.byte_queue.put(line)
-            else:
-                time.sleep(0.1)
-        self.byte_queue.put(self.sentinel)
-
-    # Thread that processes the stream of bytes to 1) log to stdout, 2) log to
-    # file, 3) add to the queue of lines to be read by program logic
-
-    def serial_lines_thread_loop(self):
-        line = bytearray()
-        while True:
-            bytes = self.byte_queue.get(block=True)
-
-            if bytes == self.sentinel:
-                self.read_thread.join()
-                self.line_queue.put(self.sentinel)
-                break
-
-            # Write our data to the output file if we're the ones reading from
-            # the serial device
-            if self.dev:
-                self.f.write(bytes)
-                self.f.flush()
-
-            for b in bytes:
-                line.append(b)
-                if b == b'\n'[0]:
-                    line = line.decode(errors="replace")
-
-                    time = datetime.now().strftime('%y-%m-%d %H:%M:%S')
-                    print("{endc}{time} {prefix}{line}".format(
-                        time=time, prefix=self.prefix, line=line, endc='\033[0m'), flush=True, end='')
-
-                    self.line_queue.put(line)
-                    line = bytearray()
-
-    def get_line(self):
-        line = self.line_queue.get()
-        if line == self.sentinel:
-            self.lines_thread.join()
-        return line
-
-    def lines(self):
-        return iter(self.get_line, self.sentinel)
-
-
-def main():
-    parser = argparse.ArgumentParser()
-
-    parser.add_argument('--dev', type=str, help='Serial device')
-    parser.add_argument('--file', type=str,
-                        help='Filename for serial output', required=True)
-    parser.add_argument('--prefix', type=str,
-                        help='Prefix for logging serial to stdout', nargs='?')
-
-    args = parser.parse_args()
-
-    ser = SerialBuffer(args.dev, args.file, args.prefix or "")
-    for line in ser.lines():
-        # We're just using this as a logger, so eat the produced lines and drop
-        # them
-        pass
-
-
-if __name__ == '__main__':
-    main()

.gitlab-ci/bare-metal/telnet-buffer.py

@@ -1,41 +0,0 @@
-#!/usr/bin/python3
-
-# Copyright © 2020 Christian Gmeiner
-#
-# Permission is hereby granted, free of charge, to any person obtaining a
-# copy of this software and associated documentation files (the "Software"),
-# to deal in the Software without restriction, including without limitation
-# the rights to use, copy, modify, merge, publish, distribute, sublicense,
-# and/or sell copies of the Software, and to permit persons to whom the
-# Software is furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice (including the next
-# paragraph) shall be included in all copies or substantial portions of the
-# Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
-# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
-# IN THE SOFTWARE.
-#
-# Tiny script to read bytes from telnet, and write the output to stdout, with a
-# buffer in between so we don't lose serial output from its buffer.
-#
-
-import sys
-import telnetlib
-
-host=sys.argv[1]
-port=sys.argv[2]
-
-tn = telnetlib.Telnet(host, port, 1000000)
-
-while True:
-    bytes = tn.read_some()
-    sys.stdout.buffer.write(bytes)
-    sys.stdout.flush()
-
-tn.close()

.gitlab-ci/common/capture-devcoredump.sh

@@ -1,14 +0,0 @@
-#!/bin/sh
-
-while true; do
-  devcds=`find /sys/devices/virtual/devcoredump/ -name data 2>/dev/null`
-  for i in $devcds; do
-    echo "Found a devcoredump at $i."
-    if cp $i /results/first.devcore; then
-      echo 1 > $i
-      echo "Saved to the job artifacts at /first.devcore"
-      exit 0
-    fi
-  done
-  sleep 10
-done

.gitlab-ci/common/generate-env.sh

@@ -1,111 +0,0 @@
-#!/bin/bash
-
-for var in \
-    ASAN_OPTIONS \
-    BASE_SYSTEM_FORK_HOST_PREFIX \
-    BASE_SYSTEM_MAINLINE_HOST_PREFIX \
-    CI_COMMIT_BRANCH \
-    CI_COMMIT_REF_NAME \
-    CI_COMMIT_TITLE \
-    CI_JOB_ID \
-    CI_JOB_JWT_FILE \
-    CI_JOB_NAME \
-    CI_JOB_URL \
-    CI_MERGE_REQUEST_SOURCE_BRANCH_NAME \
-    CI_MERGE_REQUEST_TITLE \
-    CI_NODE_INDEX \
-    CI_NODE_TOTAL \
-    CI_PAGES_DOMAIN \
-    CI_PIPELINE_ID \
-    CI_PIPELINE_URL \
-    CI_PROJECT_DIR \
-    CI_PROJECT_NAME \
-    CI_PROJECT_PATH \
-    CI_PROJECT_ROOT_NAMESPACE \
-    CI_RUNNER_DESCRIPTION \
-    CI_SERVER_URL \
-    CROSVM_GALLIUM_DRIVER \
-    CROSVM_GPU_ARGS \
-    CROSVM_TEST_SCRIPT \
-    DEQP_BIN_DIR \
-    DEQP_CASELIST_FILTER \
-    DEQP_CASELIST_INV_FILTER \
-    DEQP_CONFIG \
-    DEQP_EXPECTED_RENDERER \
-    DEQP_FRACTION \
-    DEQP_HEIGHT \
-    DEQP_RESULTS_DIR \
-    DEQP_RUNNER_OPTIONS \
-    DEQP_SUITE \
-    DEQP_TEMP_DIR \
-    DEQP_VARIANT \
-    DEQP_VER \
-    DEQP_WIDTH \
-    DEVICE_NAME \
-    DRIVER_NAME \
-    EGL_PLATFORM \
-    ETNA_MESA_DEBUG \
-    FDO_CI_CONCURRENT \
-    FDO_UPSTREAM_REPO \
-    FD_MESA_DEBUG \
-    FLAKES_CHANNEL \
-    GALLIUM_DRIVER \
-    GALLIVM_PERF \
-    GPU_VERSION \
-    GTEST \
-    GTEST_FAILS \
-    GTEST_FRACTION \
-    GTEST_RESULTS_DIR \
-    GTEST_RUNNER_OPTIONS \
-    GTEST_SKIPS \
-    HWCI_FREQ_MAX \
-    HWCI_KERNEL_MODULES \
-    HWCI_START_XORG \
-    HWCI_TEST_SCRIPT \
-    IR3_SHADER_DEBUG \
-    JOB_ARTIFACTS_BASE \
-    JOB_RESULTS_PATH \
-    JOB_ROOTFS_OVERLAY_PATH \
-    LD_LIBRARY_PATH \
-    LP_NUM_THREADS \
-    MESA_BASE_TAG \
-    MESA_BUILD_PATH \
-    MESA_DEBUG \
-    MESA_GLES_VERSION_OVERRIDE \
-    MESA_GLSL_VERSION_OVERRIDE \
-    MESA_GL_VERSION_OVERRIDE \
-    MESA_IMAGE \
-    MESA_IMAGE_PATH \
-    MESA_IMAGE_TAG \
-    MESA_TEMPLATES_COMMIT \
-    MESA_VK_IGNORE_CONFORMANCE_WARNING \
-    MINIO_HOST \
-    NIR_DEBUG \
-    PAN_I_WANT_A_BROKEN_VULKAN_DRIVER \
-    PAN_MESA_DEBUG \
-    PIGLIT_FRACTION \
-    PIGLIT_NO_WINDOW \
-    PIGLIT_OPTIONS \
-    PIGLIT_PLATFORM \
-    PIGLIT_PROFILES \
-    PIGLIT_REPLAY_ARTIFACTS_BASE_URL \
-    PIGLIT_REPLAY_DESCRIPTION_FILE \
-    PIGLIT_REPLAY_DEVICE_NAME \
-    PIGLIT_REPLAY_EXTRA_ARGS \
-    PIGLIT_REPLAY_REFERENCE_IMAGES_BASE \
-    PIGLIT_REPLAY_SUBCOMMAND \
-    PIGLIT_RESULTS \
-    PIGLIT_TESTS \
-    PIPELINE_ARTIFACTS_BASE \
-    SKQP_ASSETS_DIR \
-    SKQP_BACKENDS \
-    TU_DEBUG \
-    VIRGL_HOST_API \
-    VK_CPU \
-    VK_DRIVER \
-    VK_ICD_FILENAMES \
-    ; do
-  if [ -n "${!var+x}" ]; then
-    echo "export $var=${!var@Q}"
-  fi
-done

.gitlab-ci/common/init-stage1.sh

@@ -1,22 +0,0 @@
-#!/bin/sh
-
-# Very early init, used to make sure devices and network are set up and
-# reachable.
-
-set -ex
-
-cd /
-
-mount -t proc none /proc
-mount -t sysfs none /sys
-mount -t devtmpfs none /dev || echo possibly already mounted
-mkdir -p /dev/pts
-mount -t devpts devpts /dev/pts
-mount -t tmpfs tmpfs /tmp
-
-echo "nameserver 8.8.8.8" > /etc/resolv.conf
-[ -z "$NFS_SERVER_IP" ] || echo "$NFS_SERVER_IP caching-proxy" >> /etc/hosts
-
-# Set the time so we can validate certificates before we fetch anything;
-# however as not all DUTs have network, make this non-fatal.
-for i in 1 2 3; do sntp -sS pool.ntp.org && break || sleep 2; done || true

.gitlab-ci/common/init-stage2.sh

@@ -1,78 +0,0 @@
-#!/bin/sh
-
-# Second-stage init, used to set up devices and our job environment before
-# running tests.
-
-. /set-job-env-vars.sh
-
-set -ex
-
-# Set up any devices required by the jobs
-[ -z "$HWCI_KERNEL_MODULES" ] || (echo -n $HWCI_KERNEL_MODULES | xargs -d, -n1 /usr/sbin/modprobe)
-
-# Fix prefix confusion: the build installs to $CI_PROJECT_DIR, but we expect
-# it in /install
-ln -sf $CI_PROJECT_DIR/install /install
-export LD_LIBRARY_PATH=/install/lib
-export LIBGL_DRIVERS_PATH=/install/lib/dri
-
-# Store Mesa's disk cache under /tmp, rather than sending it out over NFS.
-export XDG_CACHE_HOME=/tmp
-
-# Make sure Python can find all our imports
-export PYTHONPATH=$(python3 -c "import sys;print(\":\".join(sys.path))")
-
-if [ "$HWCI_FREQ_MAX" = "true" ]; then
-  # Ensure initialization of the DRM device (needed by MSM)
-  head -0 /dev/dri/renderD128
-
-  # Disable GPU frequency scaling
-  DEVFREQ_GOVERNOR=`find /sys/devices -name governor | grep gpu || true`
-  test -z "$DEVFREQ_GOVERNOR" || echo performance > $DEVFREQ_GOVERNOR || true
-
-  # Disable CPU frequency scaling
-  echo performance | tee -a /sys/devices/system/cpu/cpufreq/policy*/scaling_governor || true
-
-  # Disable GPU runtime power management
-  GPU_AUTOSUSPEND=`find /sys/devices -name autosuspend_delay_ms | grep gpu | head -1`
-  test -z "$GPU_AUTOSUSPEND" || echo -1 > $GPU_AUTOSUSPEND || true
-fi
-
-# Start a little daemon to capture the first devcoredump we encounter.  (They
-# expire after 5 minutes, so we poll for them).
-./capture-devcoredump.sh &
-
-# If we want Xorg to be running for the test, then we start it up before the
-# HWCI_TEST_SCRIPT because we need to use xinit to start X (otherwise
-# without using -displayfd you can race with Xorg's startup), but xinit will eat
-# your client's return code
-if [ -n "$HWCI_START_XORG" ]; then
-  echo "touch /xorg-started; sleep 100000" > /xorg-script
-  env \
-    xinit /bin/sh /xorg-script -- /usr/bin/Xorg -noreset -s 0 -dpms -logfile /Xorg.0.log &
-
-  # Wait for xorg to be ready for connections.
-  for i in 1 2 3 4 5; do
-    if [ -e /xorg-started ]; then
-      break
-    fi
-    sleep 5
-  done
-  export DISPLAY=:0
-fi
-
-RESULT=fail
-if sh $HWCI_TEST_SCRIPT; then
-  RESULT=pass
-  rm -rf results/trace/$PIGLIT_REPLAY_DEVICE_NAME
-fi
-
-# upload artifacts
-MINIO=$(cat /proc/cmdline | tr ' ' '\n' | grep minio_results | cut -d '=' -f 2 || true)
-if [ -n "$MINIO" ]; then
-  tar -czf results.tar.gz results/;
-  ci-fairy minio login --token-file "${CI_JOB_JWT_FILE}";
-  ci-fairy minio cp results.tar.gz minio://"$MINIO"/results.tar.gz;
-fi
-
-echo "hwci: mesa: $RESULT"

.gitlab-ci/common/start-x.sh

@@ -1,21 +0,0 @@
-#!/bin/sh
-
-set -ex
-
-_XORG_SCRIPT="/xorg-script"
-_FLAG_FILE="/xorg-started"
-
-echo "touch ${_FLAG_FILE}; sleep 100000" > "${_XORG_SCRIPT}"
-if [ "x$1" != "x" ]; then
-    export LD_LIBRARY_PATH="${1}/lib"
-    export LIBGL_DRIVERS_PATH="${1}/lib/dri"
-fi
-xinit /bin/sh "${_XORG_SCRIPT}" -- /usr/bin/Xorg vt45 -noreset -s 0 -dpms -logfile /Xorg.0.log &
-
-# Wait for xorg to be ready for connections.
-for i in 1 2 3 4 5; do
-    if [ -e "${_FLAG_FILE}" ]; then
-        break
-    fi
-    sleep 5
-done

.gitlab-ci/container/arm.config

@@ -1,57 +0,0 @@
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_DEBUG_KERNEL=y
-
-# abootimg with a 'dummy' rootfs fails with root=/dev/nfs
-CONFIG_BLK_DEV_INITRD=n
-
-CONFIG_DEVFREQ_GOV_PERFORMANCE=y
-CONFIG_DEVFREQ_GOV_POWERSAVE=y
-CONFIG_DEVFREQ_GOV_USERSPACE=y
-CONFIG_DEVFREQ_GOV_PASSIVE=y
-CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
-
-CONFIG_DRM=y
-CONFIG_DRM_ETNAVIV=y
-CONFIG_DRM_ROCKCHIP=y
-CONFIG_DRM_PANFROST=y
-CONFIG_DRM_LIMA=y
-CONFIG_DRM_PANEL_SIMPLE=y
-CONFIG_PWM_CROS_EC=y
-CONFIG_BACKLIGHT_PWM=y
-
-CONFIG_ROCKCHIP_CDN_DP=n
-
-CONFIG_SPI_ROCKCHIP=y
-CONFIG_PWM_ROCKCHIP=y
-CONFIG_PHY_ROCKCHIP_DP=y
-CONFIG_DWMAC_ROCKCHIP=y
-
-CONFIG_MFD_RK808=y
-CONFIG_REGULATOR_RK808=y
-CONFIG_RTC_DRV_RK808=y
-CONFIG_COMMON_CLK_RK808=y
-
-CONFIG_REGULATOR_FAN53555=y
-CONFIG_REGULATOR=y
-
-CONFIG_REGULATOR_VCTRL=y
-
-CONFIG_KASAN=n
-CONFIG_KASAN_INLINE=n
-CONFIG_STACKTRACE=n
-
-CONFIG_TMPFS=y
-
-CONFIG_PROVE_LOCKING=n
-CONFIG_DEBUG_LOCKDEP=n
-CONFIG_SOFTLOCKUP_DETECTOR=n
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=n
-
-CONFIG_FW_LOADER_COMPRESS=y
-
-CONFIG_USB_USBNET=y
-CONFIG_NETDEVICES=y
-CONFIG_USB_NET_DRIVERS=y
-CONFIG_USB_RTL8152=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_SMSC95XX=y

.gitlab-ci/container/arm64.config

@@ -1,159 +0,0 @@
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_DEBUG_KERNEL=y
-
-# abootimg with a 'dummy' rootfs fails with root=/dev/nfs
-CONFIG_BLK_DEV_INITRD=n
-
-CONFIG_DEVFREQ_GOV_PERFORMANCE=y
-CONFIG_DEVFREQ_GOV_POWERSAVE=y
-CONFIG_DEVFREQ_GOV_USERSPACE=y
-CONFIG_DEVFREQ_GOV_PASSIVE=y
-
-CONFIG_DRM=y
-CONFIG_DRM_ROCKCHIP=y
-CONFIG_DRM_PANFROST=y
-CONFIG_DRM_LIMA=y
-CONFIG_DRM_PANEL_SIMPLE=y
-CONFIG_DRM_PANEL_EDP=y
-CONFIG_DRM_MSM=y
-CONFIG_DRM_I2C_ADV7511=y
-CONFIG_PWM_CROS_EC=y
-CONFIG_BACKLIGHT_PWM=y
-
-CONFIG_ROCKCHIP_CDN_DP=n
-
-CONFIG_SPI_ROCKCHIP=y
-CONFIG_PWM_ROCKCHIP=y
-CONFIG_PHY_ROCKCHIP_DP=y
-CONFIG_DWMAC_ROCKCHIP=y
-CONFIG_STMMAC_ETH=y
-CONFIG_TYPEC_FUSB302=y
-CONFIG_TYPEC=y
-CONFIG_TYPEC_TCPM=y
-
-# MSM platform bits
-
-# For CONFIG_QCOM_LMH
-CONFIG_OF=y
-
-CONFIG_QCOM_COMMAND_DB=y
-CONFIG_QCOM_RPMHPD=y
-CONFIG_QCOM_RPMPD=y
-CONFIG_SDM_GPUCC_845=y
-CONFIG_SDM_VIDEOCC_845=y
-CONFIG_SDM_DISPCC_845=y
-CONFIG_SDM_LPASSCC_845=y
-CONFIG_SDM_CAMCC_845=y
-CONFIG_RESET_QCOM_PDC=y
-CONFIG_DRM_TI_SN65DSI86=y
-CONFIG_I2C_QCOM_GENI=y
-CONFIG_SPI_QCOM_GENI=y
-CONFIG_PHY_QCOM_QUSB2=y
-CONFIG_PHY_QCOM_QMP=y
-CONFIG_QCOM_CLK_APCC_MSM8996=y
-CONFIG_QCOM_LLCC=y
-CONFIG_QCOM_LMH=y
-CONFIG_QCOM_SPMI_TEMP_ALARM=y
-CONFIG_QCOM_WDT=y
-CONFIG_POWER_RESET_QCOM_PON=y
-CONFIG_RTC_DRV_PM8XXX=y
-CONFIG_INTERCONNECT=y
-CONFIG_INTERCONNECT_QCOM=y
-CONFIG_INTERCONNECT_QCOM_SDM845=y
-CONFIG_INTERCONNECT_QCOM_MSM8916=y
-CONFIG_INTERCONNECT_QCOM_OSM_L3=y
-CONFIG_INTERCONNECT_QCOM_SC7180=y
-CONFIG_CRYPTO_DEV_QCOM_RNG=y
-CONFIG_SC_DISPCC_7180=y
-CONFIG_SC_GPUCC_7180=y
-
-# db410c ethernet
-CONFIG_USB_RTL8152=y
-# db820c ethernet
-CONFIG_ATL1C=y
-
-CONFIG_ARCH_ALPINE=n
-CONFIG_ARCH_BCM2835=n
-CONFIG_ARCH_BCM_IPROC=n
-CONFIG_ARCH_BERLIN=n
-CONFIG_ARCH_BRCMSTB=n
-CONFIG_ARCH_EXYNOS=n
-CONFIG_ARCH_K3=n
-CONFIG_ARCH_LAYERSCAPE=n
-CONFIG_ARCH_LG1K=n
-CONFIG_ARCH_HISI=n
-CONFIG_ARCH_MVEBU=n
-CONFIG_ARCH_SEATTLE=n
-CONFIG_ARCH_SYNQUACER=n
-CONFIG_ARCH_RENESAS=n
-CONFIG_ARCH_R8A774A1=n
-CONFIG_ARCH_R8A774C0=n
-CONFIG_ARCH_R8A7795=n
-CONFIG_ARCH_R8A7796=n
-CONFIG_ARCH_R8A77965=n
-CONFIG_ARCH_R8A77970=n
-CONFIG_ARCH_R8A77980=n
-CONFIG_ARCH_R8A77990=n
-CONFIG_ARCH_R8A77995=n
-CONFIG_ARCH_STRATIX10=n
-CONFIG_ARCH_TEGRA=n
-CONFIG_ARCH_SPRD=n
-CONFIG_ARCH_THUNDER=n
-CONFIG_ARCH_THUNDER2=n
-CONFIG_ARCH_UNIPHIER=n
-CONFIG_ARCH_VEXPRESS=n
-CONFIG_ARCH_XGENE=n
-CONFIG_ARCH_ZX=n
-CONFIG_ARCH_ZYNQMP=n
-
-# Strip out some stuff we don't need for graphics testing, to reduce
-# the build.
-CONFIG_CAN=n
-CONFIG_WIRELESS=n
-CONFIG_RFKILL=n
-CONFIG_WLAN=n
-
-CONFIG_REGULATOR_FAN53555=y
-CONFIG_REGULATOR=y
-
-CONFIG_REGULATOR_VCTRL=y
-
-CONFIG_KASAN=n
-CONFIG_KASAN_INLINE=n
-CONFIG_STACKTRACE=n
-
-CONFIG_TMPFS=y
-
-CONFIG_PROVE_LOCKING=n
-CONFIG_DEBUG_LOCKDEP=n
-CONFIG_SOFTLOCKUP_DETECTOR=y
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
-
-CONFIG_DETECT_HUNG_TASK=y
-
-CONFIG_FW_LOADER_COMPRESS=y
-CONFIG_FW_LOADER_USER_HELPER=n
-
-CONFIG_USB_USBNET=y
-CONFIG_NETDEVICES=y
-CONFIG_USB_NET_DRIVERS=y
-CONFIG_USB_RTL8152=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_SMSC95XX=y
-
-# For amlogic
-CONFIG_MESON_GXL_PHY=y
-CONFIG_MDIO_BUS_MUX_MESON_G12A=y
-CONFIG_DRM_MESON=y
-
-# For Mediatek
-CONFIG_DRM_MEDIATEK=y
-CONFIG_PWM_MEDIATEK=y
-CONFIG_DRM_MEDIATEK_HDMI=y
-CONFIG_GNSS=y
-CONFIG_GNSS_MTK_SERIAL=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_MTK=y
-CONFIG_MTK_DEVAPC=y
-CONFIG_PWM_MTK_DISP=y
-CONFIG_MTK_CMDQ=y

.gitlab-ci/container/baremetal_build.sh

@@ -1,48 +0,0 @@
-#!/bin/bash
-
-set -e
-set -o xtrace
-
-# Fetch the arm-built rootfs image and unpack it in our x86 container (saves
-# network transfer, disk usage, and runtime on test jobs)
-
-if wget -q --method=HEAD "${ARTIFACTS_PREFIX}/${FDO_UPSTREAM_REPO}/${ARTIFACTS_SUFFIX}/${arch}/done"; then
-  ARTIFACTS_URL="${ARTIFACTS_PREFIX}/${FDO_UPSTREAM_REPO}/${ARTIFACTS_SUFFIX}/${arch}"
-else
-  ARTIFACTS_URL="${ARTIFACTS_PREFIX}/${CI_PROJECT_PATH}/${ARTIFACTS_SUFFIX}/${arch}"
-fi
-
-wget ${ARTIFACTS_URL}/lava-rootfs.tgz -O rootfs.tgz
-mkdir -p /rootfs-$arch
-tar -C /rootfs-$arch '--exclude=./dev/*' -zxf rootfs.tgz
-rm rootfs.tgz
-
-if [[ $arch == "arm64" ]]; then
-    mkdir -p /baremetal-files
-    pushd /baremetal-files
-
-    wget ${ARTIFACTS_URL}/Image
-    wget ${ARTIFACTS_URL}/Image.gz
-    wget ${ARTIFACTS_URL}/cheza-kernel
-
-    DEVICE_TREES="apq8016-sbc.dtb apq8096-db820c.dtb"
-
-    for DTB in $DEVICE_TREES; do
-        wget ${ARTIFACTS_URL}/$DTB
-    done
-
-    popd
-elif [[ $arch == "armhf" ]]; then
-    mkdir -p /baremetal-files
-    pushd /baremetal-files
-
-    wget ${ARTIFACTS_URL}/zImage
-
-    DEVICE_TREES="imx6q-cubox-i.dtb"
-
-    for DTB in $DEVICE_TREES; do
-        wget ${ARTIFACTS_URL}/$DTB
-    done
-
-    popd
-fi

.gitlab-ci/container/build-apitrace.sh

@@ -1,18 +0,0 @@
-#!/bin/bash
-
-set -ex
-
-APITRACE_VERSION="170424754bb46002ba706e16ee5404b61988d74a"
-
-git clone https://github.com/apitrace/apitrace.git --single-branch --no-checkout /apitrace
-pushd /apitrace
-git checkout "$APITRACE_VERSION"
-git submodule update --init --depth 1 --recursive
-cmake -S . -B _build -G Ninja -DCMAKE_BUILD_TYPE=Release -DENABLE_GUI=False -DENABLE_WAFFLE=on $EXTRA_CMAKE_ARGS
-ninja -C _build
-mkdir build
-cp _build/apitrace build
-cp _build/eglretrace build
-${STRIP_CMD:-strip} build/*
-find . -not -path './build' -not -path './build/*' -delete
-popd

.gitlab-ci/container/build-crosvm.sh

@@ -1,36 +0,0 @@
-#!/bin/bash
-
-set -ex
-
-CROSVM_VERSION=d2b6a64dd31c92a284a905c0f2483d0b222b1220
-git clone --single-branch -b for-mesa-ci --no-checkout https://gitlab.freedesktop.org/tomeu/crosvm.git /platform/crosvm
-pushd /platform/crosvm
-git checkout "$CROSVM_VERSION"
-git submodule update --init
-
-VIRGLRENDERER_VERSION=e420a5aab92de8fb42fad50762f0ac3b5fcb3bfb
-rm -rf third_party/virglrenderer
-git clone --single-branch -b master --no-checkout https://gitlab.freedesktop.org/virgl/virglrenderer.git third_party/virglrenderer
-pushd third_party/virglrenderer
-git checkout "$VIRGLRENDERER_VERSION"
-meson build/ $EXTRA_MESON_ARGS
-ninja -C build install
-popd
-
-RUSTFLAGS='-L native=/usr/local/lib' cargo install \
-  bindgen \
-  -j ${FDO_CI_CONCURRENT:-4} \
-  --root /usr/local \
-  $EXTRA_CARGO_ARGS
-
-RUSTFLAGS='-L native=/usr/local/lib' cargo install \
-  -j ${FDO_CI_CONCURRENT:-4} \
-  --locked \
-  --features 'default-no-sandbox gpu x virgl_renderer virgl_renderer_next' \
-  --path . \
-  --root /usr/local \
-  $EXTRA_CARGO_ARGS
-
-popd
-
-rm -rf $PLATFORM2_ROOT $AOSP_EXTERNAL_ROOT/minijail $THIRD_PARTY_ROOT/adhd $THIRD_PARTY_ROOT/rust-vmm /platform/crosvm

.gitlab-ci/container/build-deqp-runner.sh

@@ -1,22 +0,0 @@
-#!/bin/sh
-
-set -ex
-
-if [ -n "${DEQP_RUNNER_GIT_TAG}${DEQP_RUNNER_GIT_REV}" ]; then
-    # Build and install from source
-    EXTRA_CARGO_ARGS="--git ${DEQP_RUNNER_GIT_URL:-https://gitlab.freedesktop.org/anholt/deqp-runner.git} ${EXTRA_CARGO_ARGS}"
-
-    if [ -n "${DEQP_RUNNER_GIT_TAG}" ]; then
-        EXTRA_CARGO_ARGS="--tag ${DEQP_RUNNER_GIT_TAG} ${EXTRA_CARGO_ARGS}"
-    else
-        EXTRA_CARGO_ARGS="--rev ${DEQP_RUNNER_GIT_REV} ${EXTRA_CARGO_ARGS}"
-    fi
-else
-    # Install from package registry
-    EXTRA_CARGO_ARGS="--version 0.11.0 ${EXTRA_CARGO_ARGS} -- deqp-runner"
-fi
-
-cargo install --locked  \
-    -j ${FDO_CI_CONCURRENT:-4} \
-    --root /usr/local \
-    ${EXTRA_CARGO_ARGS}

.gitlab-ci/container/build-deqp.sh

@@ -1,86 +0,0 @@
-#!/bin/bash
-
-set -ex
-
-git config --global user.email "mesa@example.com"
-git config --global user.name "Mesa CI"
-git clone \
-    https://github.com/KhronosGroup/VK-GL-CTS.git \
-    -b vulkan-cts-1.2.7.2 \
-    --depth 1 \
-    /VK-GL-CTS
-pushd /VK-GL-CTS
-
-# --insecure is due to SSL cert failures hitting sourceforge for zlib and
-# libpng (sigh).  The archives get their checksums checked anyway, and git
-# always goes through ssh or https.
-python3 external/fetch_sources.py --insecure
-
-mkdir -p /deqp
-
-# Save the testlog stylesheets:
-cp doc/testlog-stylesheet/testlog.{css,xsl} /deqp
-popd
-
-pushd /deqp
-# When including EGL/X11 testing, do that build first and save off its
-# deqp-egl binary.
-cmake -S /VK-GL-CTS -B . -G Ninja \
-      -DDEQP_TARGET=x11_egl_glx \
-      -DCMAKE_BUILD_TYPE=Release \
-      $EXTRA_CMAKE_ARGS
-ninja modules/egl/deqp-egl
-cp /deqp/modules/egl/deqp-egl /deqp/modules/egl/deqp-egl-x11
-
-
-cmake -S /VK-GL-CTS -B . -G Ninja \
-      -DDEQP_TARGET=${DEQP_TARGET:-x11_glx} \
-      -DCMAKE_BUILD_TYPE=Release \
-      $EXTRA_CMAKE_ARGS
-ninja
-
-mv /deqp/modules/egl/deqp-egl-x11 /deqp/modules/egl/deqp-egl
-
-# Copy out the mustpass lists we want.
-mkdir /deqp/mustpass
-for mustpass in $(< /VK-GL-CTS/external/vulkancts/mustpass/master/vk-default.txt) ; do
-    cat /VK-GL-CTS/external/vulkancts/mustpass/master/$mustpass \
-        >> /deqp/mustpass/vk-master.txt
-done
-
-cp \
-    /deqp/external/openglcts/modules/gl_cts/data/mustpass/gles/aosp_mustpass/3.2.6.x/*.txt \
-    /deqp/mustpass/.
-cp \
-    /deqp/external/openglcts/modules/gl_cts/data/mustpass/egl/aosp_mustpass/3.2.6.x/egl-master.txt \
-    /deqp/mustpass/.
-cp \
-    /deqp/external/openglcts/modules/gl_cts/data/mustpass/gles/khronos_mustpass/3.2.6.x/*-master.txt \
-    /deqp/mustpass/.
-cp \
-    /deqp/external/openglcts/modules/gl_cts/data/mustpass/gl/khronos_mustpass/4.6.1.x/*-master.txt \
-    /deqp/mustpass/.
-
-# Save *some* executor utils, but otherwise strip things down
-# to reduct deqp build size:
-mkdir /deqp/executor.save
-cp /deqp/executor/testlog-to-* /deqp/executor.save
-rm -rf /deqp/executor
-mv /deqp/executor.save /deqp/executor
-
-# Remove other mustpass files, since we saved off the ones we wanted to conventient locations above.
-rm -rf /deqp/external/openglcts/modules/gl_cts/data/mustpass
-rm -rf /deqp/external/vulkancts/modules/vulkan/vk-master*
-rm -rf /deqp/external/vulkancts/modules/vulkan/vk-default
-
-rm -rf /deqp/external/openglcts/modules/cts-runner
-rm -rf /deqp/modules/internal
-rm -rf /deqp/execserver
-rm -rf /deqp/framework
-find -iname '*cmake*' -o -name '*ninja*' -o -name '*.o' -o -name '*.a' | xargs rm -rf
-${STRIP_CMD:-strip} external/vulkancts/modules/vulkan/deqp-vk
-${STRIP_CMD:-strip} external/openglcts/modules/glcts
-${STRIP_CMD:-strip} modules/*/deqp-*
-du -sh *
-rm -rf /VK-GL-CTS
-popd

.gitlab-ci/container/build-fossilize.sh

@@ -1,14 +0,0 @@
-#!/bin/bash
-
-set -ex
-
-git clone https://github.com/ValveSoftware/Fossilize.git
-cd Fossilize
-git checkout 72088685d90bc814d14aad5505354ffa8a642789
-git submodule update --init
-mkdir build
-cd build
-cmake -S .. -B . -G Ninja -DCMAKE_BUILD_TYPE=Release
-ninja -C . install
-cd ../..
-rm -rf Fossilize

.gitlab-ci/container/build-gfxreconstruct.sh

@@ -1,19 +0,0 @@
-#!/bin/bash
-
-set -ex
-
-GFXRECONSTRUCT_VERSION=3738decc2f4f9ff183818e5ab213a75a79fb7ab1
-
-git clone https://github.com/LunarG/gfxreconstruct.git --single-branch -b master --no-checkout /gfxreconstruct
-pushd /gfxreconstruct
-git checkout "$GFXRECONSTRUCT_VERSION"
-git submodule update --init
-git submodule update
-cmake -S . -B _build -G Ninja -DCMAKE_BUILD_TYPE=Release
-ninja -C _build gfxrecon-replay gfxrecon-info
-mkdir -p build/bin
-install _build/tools/replay/gfxrecon-replay build/bin
-install _build/tools/info/gfxrecon-info build/bin
-strip build/bin/*
-find . -not -path './build' -not -path './build/*' -delete
-popd

.gitlab-ci/container/build-hang-detection.sh

@@ -1,16 +0,0 @@
-#!/bin/bash
-
-set -ex
-
-PARALLEL_DEQP_RUNNER_VERSION=6596b71cf37a7efb4d54acd48c770ed2d4ad6b7e
-
-git clone https://gitlab.freedesktop.org/mesa/parallel-deqp-runner --single-branch -b master --no-checkout /parallel-deqp-runner
-pushd /parallel-deqp-runner
-git checkout "$PARALLEL_DEQP_RUNNER_VERSION"
-meson . _build
-ninja -C _build hang-detection
-mkdir -p build/bin
-install _build/hang-detection build/bin
-strip build/bin/*
-find . -not -path './build' -not -path './build/*' -delete
-popd

.gitlab-ci/container/build-kernel.sh

@@ -1,51 +0,0 @@
-#!/bin/bash
-
-set -ex
-
-mkdir -p kernel
-wget -qO- ${KERNEL_URL} | tar -xj --strip-components=1 -C kernel
-pushd kernel
-
-# The kernel doesn't like the gold linker (or the old lld in our debians).
-# Sneak in some override symlinks during kernel build until we can update
-# debian (they'll get blown away by the rm of the kernel dir at the end).
-mkdir -p ld-links
-for i in /usr/bin/*-ld /usr/bin/ld; do
-    i=`basename $i`
-    ln -sf /usr/bin/$i.bfd ld-links/$i
-done
-export PATH=`pwd`/ld-links:$PATH
-
-export LOCALVERSION="`basename $KERNEL_URL`"
-./scripts/kconfig/merge_config.sh ${DEFCONFIG} ../.gitlab-ci/container/${KERNEL_ARCH}.config
-make ${KERNEL_IMAGE_NAME}
-for image in ${KERNEL_IMAGE_NAME}; do
-    cp arch/${KERNEL_ARCH}/boot/${image} /lava-files/.
-done
-
-if [[ -n ${DEVICE_TREES} ]]; then
-    make dtbs
-    cp ${DEVICE_TREES} /lava-files/.
-fi
-
-if [[ ${DEBIAN_ARCH} = "amd64" ]]; then
-    make modules
-    INSTALL_MOD_PATH=/lava-files/rootfs-${DEBIAN_ARCH}/ make modules_install
-fi
-
-if [[ ${DEBIAN_ARCH} = "arm64" ]]; then
-    make Image.lzma
-    mkimage \
-        -f auto \
-        -A arm \
-        -O linux \
-        -d arch/arm64/boot/Image.lzma \
-        -C lzma\
-        -b arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dtb \
-        /lava-files/cheza-kernel
-    KERNEL_IMAGE_NAME+=" cheza-kernel"
-fi
-
-popd
-rm -rf kernel
-

.gitlab-ci/container/build-libclc.sh

@@ -1,30 +0,0 @@
-#!/bin/bash
-
-set -ex
-
-export LLVM_CONFIG="llvm-config-11"
-
-$LLVM_CONFIG --version
-
-git config --global user.email "mesa@example.com"
-git config --global user.name "Mesa CI"
-git clone \
-    https://github.com/llvm/llvm-project \
-    --depth 1 \
-    -b llvmorg-12.0.0-rc3 \
-    /llvm-project
-
-mkdir /libclc
-pushd /libclc
-cmake -S /llvm-project/libclc -B . -G Ninja -DLLVM_CONFIG=$LLVM_CONFIG -DLIBCLC_TARGETS_TO_BUILD="spirv-mesa3d-;spirv64-mesa3d-" -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=/usr -DLLVM_SPIRV=/usr/bin/llvm-spirv
-ninja
-ninja install
-popd
-
-# workaroud cmake vs debian packaging.
-mkdir -p /usr/lib/clc
-ln -s /usr/share/clc/spirv64-mesa3d-.spv /usr/lib/clc/
-ln -s /usr/share/clc/spirv-mesa3d-.spv /usr/lib/clc/
-
-du -sh *
-rm -rf /libclc /llvm-project

.gitlab-ci/container/build-libdrm.sh

@@ -1,14 +0,0 @@
-#!/bin/bash
-
-set -ex
-
-export LIBDRM_VERSION=libdrm-2.4.109
-
-wget https://dri.freedesktop.org/libdrm/$LIBDRM_VERSION.tar.xz
-tar -xvf $LIBDRM_VERSION.tar.xz && rm $LIBDRM_VERSION.tar.xz
-cd $LIBDRM_VERSION
-meson build -D vc4=false -D freedreno=false -D etnaviv=false $EXTRA_MESON_ARGS
-ninja -C build install
-cd ..
-rm -rf $LIBDRM_VERSION
-

.gitlab-ci/container/build-piglit.sh

@@ -1,23 +0,0 @@
-#!/bin/bash
-
-set -ex
-
-git clone https://gitlab.freedesktop.org/mesa/piglit.git --single-branch --no-checkout /piglit
-pushd /piglit
-git checkout af1785f31f65622d9b1ca1c08c75cf140bc7ed22
-patch -p1 <$OLDPWD/.gitlab-ci/piglit/disable-vs_in.diff
-cmake -S . -B . -G Ninja -DCMAKE_BUILD_TYPE=Release $PIGLIT_OPTS $EXTRA_CMAKE_ARGS
-ninja $PIGLIT_BUILD_TARGETS
-find -name .git -o -name '*ninja*' -o -iname '*cmake*' -o -name '*.[chao]' | xargs rm -rf
-rm -rf target_api
-if [ "x$PIGLIT_BUILD_TARGETS" = "xpiglit_replayer" ]; then
-    find ! -regex "^\.$" \
-         ! -regex "^\.\/piglit.*" \
-         ! -regex "^\.\/framework.*" \
-         ! -regex "^\.\/bin$" \
-         ! -regex "^\.\/bin\/replayer\.py" \
-         ! -regex "^\.\/templates.*" \
-         ! -regex "^\.\/tests$" \
-         ! -regex "^\.\/tests\/replay\.py" 2>/dev/null | xargs rm -rf
-fi
-popd

.gitlab-ci/container/build-rust.sh

@@ -1,31 +0,0 @@
-#!/bin/bash
-
-# Note that this script is not actually "building" rust, but build- is the
-# convention for the shared helpers for putting stuff in our containers.
-
-set -ex
-
-# cargo (and rustup) wants to store stuff in $HOME/.cargo, and binaries in
-# $HOME/.cargo/bin.  Make bin a link to a public bin directory so the commands
-# are just available to all build jobs.
-mkdir -p $HOME/.cargo
-ln -s /usr/local/bin $HOME/.cargo/bin
-
-# For rust in Mesa, we use rustup to install.  This lets us pick an arbitrary
-# version of the compiler, rather than whatever the container's Debian comes
-# with.
-#
-# Pick the rust compiler (1.48) available in Debian stable, and pick a specific
-# snapshot from rustup so the compiler doesn't drift on us.
-wget https://sh.rustup.rs -O - | \
-    sh -s -- -y --default-toolchain 1.49.0-2020-12-31
-
-# Set up a config script for cross compiling -- cargo needs your system cc for
-# linking in cross builds, but doesn't know what you want to use for system cc.
-cat > /root/.cargo/config <<EOF
-[target.armv7-unknown-linux-gnueabihf]
-linker = "arm-linux-gnueabihf-gcc"
-
-[target.aarch64-unknown-linux-gnu]
-linker = "aarch64-linux-gnu-gcc"
-EOF

.gitlab-ci/container/build-skqp.sh

@@ -1,82 +0,0 @@
-#!/bin/bash
-
-create_gn_args() {
-    cp "${BASE_ARGS_GN_FILE}" "${SKQP_OUT_DIR}"/args.gn
-    echo "target_cpu = \"${SKQP_ARCH}\"" >> "${SKQP_OUT_DIR}"/args.gn
-}
-
-download_skqp_models() (
-    # The download_model.py script needs a checksum file to know what models
-    # version to download.
-
-    # This is the most recent commit available in the skia repository with a
-    # valid files.checksum
-    SKIA_LAST_SKQP_CUT_COMMIT_SHA=ccf5f0d75b6a6b54756f2c62d57e3730eed8aa45
-    git fetch origin "${SKIA_LAST_SKQP_CUT_COMMIT_SHA}:refs/remotes/origin/${SKIA_LAST_SKQP_CUT_COMMIT_SHA}"
-    git checkout "${SKIA_LAST_SKQP_CUT_COMMIT_SHA}" -- \
-        platform_tools/android/apps/skqp/src/main/assets/files.checksum
-
-    # The following patch transforms download_model.py from python2 to python3.
-    git apply "${DOWNLOAD_MODEL_PATCH_FILE}"
-    python3 tools/skqp/download_model.py
-
-    # Copy resources from skia to skqp directory
-    python3 tools/skqp/setup_resources
-)
-
-set -ex
-
-SCRIPT_DIR=$(realpath "$(dirname "$0")")
-FETCH_GN_PATCH_FILE="${SCRIPT_DIR}/build-skqp_fetch-gn.patch"
-BASE_ARGS_GN_FILE="${SCRIPT_DIR}/build-skqp_base.gn"
-DOWNLOAD_MODEL_PATCH_FILE="${SCRIPT_DIR}/build-skqp_download_model.patch"
-
-SKQP_ARCH=${SKQP_ARCH:-x64}
-SKIA_DIR=${SKIA_DIR:-$(mktemp -d)}
-SKQP_DIR=${SKQP_DIR:-$(mktemp -d)}
-SKQP_OUT_DIR=${SKIA_DIR}/out/${SKQP_ARCH}
-SKQP_INSTALL_DIR=/skqp
-SKQP_ASSETS_DIR="${SKQP_INSTALL_DIR}/assets"
-# Build list_gpu_unit_tests to update the unittests.txt file properly to the
-# target hardware.
-SKQP_BINARIES=(skqp list_gpu_unit_tests)
-
-# Using a recent release version to mitigate instability during test phase
-SKIA_COMMIT_SHA="canvaskit/0.32.0"
-
-git clone 'https://skia.googlesource.com/skia/' \
-    --single-branch \
-    -b "${SKIA_COMMIT_SHA}" \
-    "${SKIA_DIR}"
-
-pushd "${SKIA_DIR}"
-
-git apply "${FETCH_GN_PATCH_FILE}"
-# Fetch some needed build tools needed to build skia/skqp
-# Basically, it clones repositories with commits SHAs from
-# ${SKIA_DIR}/DEPS directory
-python3 tools/git-sync-deps
-
-mkdir -p "${SKQP_OUT_DIR}"
-mkdir -p "${SKQP_INSTALL_DIR}"
-
-create_gn_args
-
-# Build and install skqp binaries
-bin/gn gen "${SKQP_OUT_DIR}"
-
-for BINARY in "${SKQP_BINARIES[@]}"
-do
-    /usr/bin/ninja -C "${SKQP_OUT_DIR}" "${BINARY}"
-    install -m 0755 "${SKQP_OUT_DIR}/${BINARY}" "${SKQP_INSTALL_DIR}"
-done
-
-# Acquire assets and move them to the target directory.
-download_skqp_models
-mv platform_tools/android/apps/skqp/src/main/assets/ "${SKQP_ASSETS_DIR}"
-
-popd
-rm -Rf "${SKQP_DIR}"
-rm -Rf "${SKIA_DIR}"
-
-set +ex

.gitlab-ci/container/build-skqp_base.gn

@@ -1,25 +0,0 @@
-cc = "gcc"
-cxx = "g++"
-
-extra_cflags = [ "-DSK_ENABLE_DUMP_GPU", "-DSK_BUILD_FOR_SKQP" ]
-extra_cflags_cc = [ "-static", "-Wno-error", "-Wno-macro-redefined", "-Wno-suggest-destructor-override", "-Wno-suggest-override" ]
-
-is_debug = false
-
-skia_enable_fontmgr_android = false
-skia_enable_fontmgr_empty = true
-skia_enable_pdf = false
-skia_enable_skottie = false
-
-skia_skqp_global_error_tolerance = 8
-skia_tools_require_resources = true
-
-skia_use_dng_sdk = false
-skia_use_expat = true
-skia_use_icu = false
-skia_use_libheif = false
-skia_use_lua = false
-skia_use_piex = false
-skia_use_vulkan = true
-
-target_os = "linux"

.gitlab-ci/container/build-skqp_download_model.patch

@@ -1,22 +0,0 @@
-diff --git a/tools/skqp/download_model.py b/tools/skqp/download_model.py
-index fb0020e481..a5d8a03754 100755
---- a/tools/skqp/download_model.py
-+++ b/tools/skqp/download_model.py
-@@ -10,7 +10,7 @@ import os
- import shutil
- import sys
- import tempfile
--import urllib2
-+import urllib.request, urllib.error, urllib.parse
-
- def checksum(path):
-     if not os.path.exists(path):
-@@ -33,7 +33,7 @@ def download(md5, path):
-                 pass  # ignore race condition
-         url = 'https://storage.googleapis.com/skia-skqp-assets/' + md5
-         with open(path, 'wb') as o:
--            shutil.copyfileobj(urllib2.urlopen(url), o)
-+            shutil.copyfileobj(urllib.request.urlopen(url), o)
-
- def tmp(prefix):
-     fd, path = tempfile.mkstemp(prefix=prefix)

.gitlab-ci/container/build-skqp_fetch-gn.patch

@@ -1,13 +0,0 @@
-diff --git a/bin/fetch-gn b/bin/fetch-gn
-index b4bb14c630..59c4591a30 100755
---- a/bin/fetch-gn
-+++ b/bin/fetch-gn
-@@ -23,7 +23,7 @@ os.chdir(os.path.join(os.path.dirname(__file__), os.pardir))
- gnzip = os.path.join(tempfile.mkdtemp(), 'gn.zip')
- with open(gnzip, 'wb') as f:
-   OS  = {'darwin': 'mac', 'linux': 'linux', 'linux2': 'linux', 'win32': 'windows'}[sys.platform]
--  cpu = {'amd64': 'amd64', 'arm64': 'arm64', 'x86_64': 'amd64'}[platform.machine().lower()]
-+  cpu = {'amd64': 'amd64', 'arm64': 'arm64', 'x86_64': 'amd64', 'aarch64': 'arm64'}[platform.machine().lower()]
- 
-   rev = 'd62642c920e6a0d1756316d225a90fd6faa9e21e'
-   url = 'https://chrome-infra-packages.appspot.com/dl/gn/gn/{}-{}/+/git_revision:{}'.format(

.gitlab-ci/container/build-va-tools.sh

@@ -1,17 +0,0 @@
-#!/bin/bash
-
-set -ex
-
-git config --global user.email "mesa@example.com"
-git config --global user.name "Mesa CI"
-git clone \
-    https://github.com/intel/libva-utils.git \
-    -b 2.13.0 \
-    --depth 1 \
-    /va-utils
-
-pushd /va-utils
-meson build -D tests=true  -Dprefix=/va $EXTRA_MESON_ARGS
-ninja -C build install
-popd
-rm -rf /va-utils

.gitlab-ci/container/build-vkd3d-proton.sh

@@ -1,43 +0,0 @@
-#!/bin/bash
-
-set -ex
-
-VKD3D_PROTON_VERSION="2.3.1"
-VKD3D_PROTON_COMMIT="3ed3526332f53d7d35cf1b685fa8096b01f26ff0"
-
-VKD3D_PROTON_DST_DIR="/vkd3d-proton-tests"
-VKD3D_PROTON_SRC_DIR="/vkd3d-proton-src"
-VKD3D_PROTON_BUILD_DIR="/vkd3d-proton-$VKD3D_PROTON_VERSION"
-
-function build_arch {
-  local arch="$1"
-  shift
-
-  meson "$@"                               \
-        -Denable_tests=true                \
-        --buildtype release                \
-        --prefix "$VKD3D_PROTON_BUILD_DIR" \
-        --strip                            \
-        --bindir "x${arch}"                \
-        --libdir "x${arch}"                \
-        "$VKD3D_PROTON_BUILD_DIR/build.${arch}"
-
-  ninja -C "$VKD3D_PROTON_BUILD_DIR/build.${arch}" install
-
-  install -D -m755 -t "${VKD3D_PROTON_DST_DIR}/x${arch}/bin" "$VKD3D_PROTON_BUILD_DIR/build.${arch}/tests/"*.exe
-}
-
-git clone https://github.com/HansKristian-Work/vkd3d-proton.git --single-branch -b "v$VKD3D_PROTON_VERSION" --no-checkout "$VKD3D_PROTON_SRC_DIR"
-pushd "$VKD3D_PROTON_SRC_DIR"
-git checkout "$VKD3D_PROTON_COMMIT"
-git submodule update --init --recursive
-git submodule update --recursive
-build_arch 64 --cross-file build-win64.txt
-build_arch 86 --cross-file build-win32.txt
-cp "setup_vkd3d_proton.sh" "$VKD3D_PROTON_BUILD_DIR/setup_vkd3d_proton.sh"
-chmod +x "$VKD3D_PROTON_BUILD_DIR/setup_vkd3d_proton.sh"
-popd
-
-"$VKD3D_PROTON_BUILD_DIR"/setup_vkd3d_proton.sh install
-rm -rf "$VKD3D_PROTON_BUILD_DIR"
-rm -rf "$VKD3D_PROTON_SRC_DIR"

.gitlab-ci/container/build-wayland.sh

@@ -1,22 +0,0 @@
-#!/bin/bash
-
-set -ex
-
-export LIBWAYLAND_VERSION="1.18.0"
-export WAYLAND_PROTOCOLS_VERSION="1.24"
-
-git clone https://gitlab.freedesktop.org/wayland/wayland
-cd wayland
-git checkout "$LIBWAYLAND_VERSION"
-meson -Ddocumentation=false -Ddtd_validation=false -Dlibraries=true _build
-ninja -C _build install
-cd ..
-rm -rf wayland
-
-git clone https://gitlab.freedesktop.org/wayland/wayland-protocols
-cd wayland-protocols
-git checkout "$WAYLAND_PROTOCOLS_VERSION"
-meson _build
-ninja -C _build install
-cd ..
-rm -rf wayland-protocols

.gitlab-ci/container/container_post_build.sh

@@ -1,10 +0,0 @@
-#!/bin/sh
-
-if test -f /etc/debian_version; then
-    apt-get autoremove -y --purge
-fi
-
-# Clean up any build cache for rust.
-rm -rf /.cargo
-
-ccache --show-stats

.gitlab-ci/container/container_pre_build.sh

@@ -1,36 +0,0 @@
-#!/bin/sh
-
-if test -f /etc/debian_version; then
-    CCACHE_PATH=/usr/lib/ccache
-else
-    CCACHE_PATH=/usr/lib64/ccache
-fi
-
-# Common setup among container builds before we get to building code.
-
-export CCACHE_COMPILERCHECK=content
-export CCACHE_COMPRESS=true
-export CCACHE_DIR=/cache/mesa/ccache
-export PATH=$CCACHE_PATH:$PATH
-
-# CMake ignores $PATH, so we have to force CC/GCC to the ccache versions.
-export CC="${CCACHE_PATH}/gcc"
-export CXX="${CCACHE_PATH}/g++"
-
-# Force linkers to gold, since it's so much faster for building.  We can't use
-# lld because we're on old debian and it's buggy.  ming fails meson builds
-# with it with "meson.build:21:0: ERROR: Unable to determine dynamic linker"
-find /usr/bin -name \*-ld -o -name ld | \
-    grep -v mingw | \
-    xargs -n 1 -I '{}' ln -sf '{}.gold' '{}'
-
-ccache --show-stats
-
-# Make a wrapper script for ninja to always include the -j flags
-echo '#!/bin/sh -x' > /usr/local/bin/ninja
-echo '/usr/bin/ninja -j${FDO_CI_CONCURRENT:-4} "$@"' >> /usr/local/bin/ninja
-chmod +x /usr/local/bin/ninja
-
-# Set MAKEFLAGS so that all make invocations in container builds include the
-# flags (doesn't apply to non-container builds, but we don't run make there)
-export MAKEFLAGS="-j${FDO_CI_CONCURRENT:-4}"

.gitlab-ci/container/create-android-cross-file.sh

@@ -1,35 +0,0 @@
-#!/bin/bash
-
-ndk=$1
-arch=$2
-cpu_family=$3
-cpu=$4
-cross_file="/cross_file-$arch.txt"
-
-# armv7 has the toolchain split between two names.
-arch2=${5:-$2}
-
-# Note that we disable C++ exceptions, because Mesa doesn't use exceptions,
-# and allowing it in code generation means we get unwind symbols that break
-# the libEGL and driver symbol tests.
-
-cat >$cross_file <<EOF
-[binaries]
-ar = '$ndk/toolchains/llvm/prebuilt/linux-x86_64/bin/$arch-ar'
-c = ['ccache', '$ndk/toolchains/llvm/prebuilt/linux-x86_64/bin/${arch2}29-clang', '-fno-exceptions', '-fno-unwind-tables', '-fno-asynchronous-unwind-tables']
-cpp = ['ccache', '$ndk/toolchains/llvm/prebuilt/linux-x86_64/bin/${arch2}29-clang++', '-fno-exceptions', '-fno-unwind-tables', '-fno-asynchronous-unwind-tables']
-c_ld = 'lld'
-cpp_ld = 'lld'
-strip = '$ndk/toolchains/llvm/prebuilt/linux-x86_64/bin/$arch-strip'
-pkgconfig = ['/usr/bin/pkg-config']
-
-[host_machine]
-system = 'linux'
-cpu_family = '$cpu_family'
-cpu = '$cpu'
-endian = 'little'
-
-[properties]
-needs_exe_wrapper = true
-
-EOF

.gitlab-ci/container/create-android-ndk-pc.sh

@@ -1,38 +0,0 @@
-#!/bin/sh
-
-# Makes a .pc file in the Android NDK for meson to find its libraries.
-
-set -ex
-
-ndk="$1"
-pc="$2"
-cflags="$3"
-libs="$4"
-version="$5"
-
-sysroot=$ndk/toolchains/llvm/prebuilt/linux-x86_64/sysroot
-
-for arch in \
-        x86_64-linux-android \
-        i686-linux-android \
-        aarch64-linux-android \
-        arm-linux-androideabi; do
-    pcdir=$sysroot/usr/lib/$arch/pkgconfig
-    mkdir -p $pcdir
-
-    cat >$pcdir/$pc <<EOF
-prefix=$sysroot
-exec_prefix=$sysroot
-libdir=$sysroot/usr/lib/$arch/29
-sharedlibdir=$sysroot/usr/lib/$arch
-includedir=$sysroot/usr/include
-
-Name: zlib
-Description: zlib compression library
-Version: $version
-
-Requires:
-Libs: -L$sysroot/usr/lib/$arch/29 $libs
-Cflags: -I$sysroot/usr/include $cflags
-EOF
-done

.gitlab-ci/container/create-cross-file.sh

@@ -1,51 +0,0 @@
-#!/bin/bash
-
-arch=$1
-cross_file="/cross_file-$arch.txt"
-/usr/share/meson/debcrossgen --arch $arch -o "$cross_file"
-# Explicitly set ccache path for cross compilers
-sed -i "s|/usr/bin/\([^-]*\)-linux-gnu\([^-]*\)-g|/usr/lib/ccache/\\1-linux-gnu\\2-g|g" "$cross_file"
-if [ "$arch" = "i386" ]; then
-    # Work around a bug in debcrossgen that should be fixed in the next release
-    sed -i "s|cpu_family = 'i686'|cpu_family = 'x86'|g" "$cross_file"
-fi
-# Rely on qemu-user being configured in binfmt_misc on the host
-sed -i -e '/\[properties\]/a\' -e "needs_exe_wrapper = False" "$cross_file"
-
-# Add a line for rustc, which debcrossgen is missing.
-cc=`sed -n 's|c = .\(.*\).|\1|p' < $cross_file`
-if [[ "$arch" = "arm64" ]]; then
-    rust_target=aarch64-unknown-linux-gnu
-elif [[ "$arch" = "armhf" ]]; then
-    rust_target=armv7-unknown-linux-gnueabihf
-elif [[ "$arch" = "i386" ]]; then
-    rust_target=i686-unknown-linux-gnu
-elif [[ "$arch" = "ppc64el" ]]; then
-    rust_target=powerpc64le-unknown-linux-gnu
-elif [[ "$arch" = "s390x" ]]; then
-    rust_target=s390x-unknown-linux-gnu
-else
-    echo "Needs rustc target mapping"
-fi
-sed -i -e '/\[binaries\]/a\' -e "rust = ['rustc', '--target=$rust_target', '-C', 'linker=$cc']" "$cross_file"
-
-# Set up cmake cross compile toolchain file for dEQP builds
-toolchain_file="/toolchain-$arch.cmake"
-if [[ "$arch" = "arm64" ]]; then
-    GCC_ARCH="aarch64-linux-gnu"
-    DE_CPU="DE_CPU_ARM_64"
-    CMAKE_ARCH=arm
-elif [[ "$arch" = "armhf" ]]; then
-    GCC_ARCH="arm-linux-gnueabihf"
-    DE_CPU="DE_CPU_ARM"
-    CMAKE_ARCH=arm
-fi
-
-if [[ -n "$GCC_ARCH" ]]; then
-    echo "set(CMAKE_SYSTEM_NAME Linux)" > "$toolchain_file"
-    echo "set(CMAKE_SYSTEM_PROCESSOR arm)" >> "$toolchain_file"
-    echo "set(CMAKE_C_COMPILER /usr/lib/ccache/$GCC_ARCH-gcc)" >> "$toolchain_file"
-    echo "set(CMAKE_CXX_COMPILER /usr/lib/ccache/$GCC_ARCH-g++)" >> "$toolchain_file"
-    echo "set(ENV{PKG_CONFIG} \"/usr/bin/$GCC_ARCH-pkg-config\")" >> "$toolchain_file"
-    echo "set(DE_CPU $DE_CPU)" >> "$toolchain_file"
-fi

.gitlab-ci/container/create-rootfs.sh

@@ -1,276 +0,0 @@
-#!/bin/bash
-
-set -ex
-
-if [ $DEBIAN_ARCH = arm64 ]; then
-    ARCH_PACKAGES="firmware-qcom-media
-                   libfontconfig1
-                   libgl1
-                   libglu1-mesa
-    "
-elif [ $DEBIAN_ARCH = amd64 ]; then
-    ARCH_PACKAGES="firmware-amd-graphics
-                   libelf1
-                   libllvm11
-                   libva2
-                   libva-drm2
-                  "
-fi
-
-INSTALL_CI_FAIRY_PACKAGES="git
-                           python3-dev
-                           python3-pip
-                           python3-setuptools
-                           python3-wheel
-                           "
-
-apt-get -y install --no-install-recommends \
-    $ARCH_PACKAGES \
-    $INSTALL_CI_FAIRY_PACKAGES \
-    ca-certificates \
-    firmware-realtek \
-    initramfs-tools \
-    libasan6 \
-    libexpat1 \
-    libpng16-16 \
-    libpython3.9 \
-    libsensors5 \
-    libvulkan1 \
-    libwaffle-1-0 \
-    libx11-6 \
-    libx11-xcb1 \
-    libxcb-dri2-0 \
-    libxcb-dri3-0 \
-    libxcb-glx0 \
-    libxcb-present0 \
-    libxcb-randr0 \
-    libxcb-shm0 \
-    libxcb-sync1 \
-    libxcb-xfixes0 \
-    libxdamage1 \
-    libxext6 \
-    libxfixes3 \
-    libxkbcommon0 \
-    libxrender1 \
-    libxshmfence1 \
-    libxxf86vm1 \
-    netcat-openbsd \
-    python3 \
-    python3-lxml \
-    python3-mako \
-    python3-numpy \
-    python3-packaging \
-    python3-pil \
-    python3-renderdoc \
-    python3-requests \
-    python3-simplejson \
-    python3-yaml \
-    sntp \
-    strace \
-    waffle-utils \
-    wget \
-    xinit \
-    xserver-xorg-core \
-    xz-utils
-
-# Needed for ci-fairy, this revision is able to upload files to
-# MinIO and doesn't depend on git
-pip3 install git+http://gitlab.freedesktop.org/freedesktop/ci-templates@34f4ade99434043f88e164933f570301fd18b125
-
-apt-get purge -y \
-        $INSTALL_CI_FAIRY_PACKAGES
-
-passwd root -d
-chsh -s /bin/sh
-
-cat > /init <<EOF
-#!/bin/sh
-export PS1=lava-shell:
-exec sh
-EOF
-chmod +x  /init
-
-#######################################################################
-# Strip the image to a small minimal system without removing the debian
-# toolchain.
-
-# xz compress firmware so it doesn't waste RAM at runtime on ramdisk systems
-find /lib/firmware -type f -print0 | \
-    xargs -0r -P4 -n4 xz -T1 -C crc32
-
-# Copy timezone file and remove tzdata package
-rm -rf /etc/localtime
-cp /usr/share/zoneinfo/Etc/UTC /etc/localtime
-
-UNNEEDED_PACKAGES="
-        libfdisk1
-        "
-
-export DEBIAN_FRONTEND=noninteractive
-
-# Removing unused packages
-for PACKAGE in ${UNNEEDED_PACKAGES}
-do
-	echo ${PACKAGE}
-	if ! apt-get remove --purge --yes "${PACKAGE}"
-	then
-		echo "WARNING: ${PACKAGE} isn't installed"
-	fi
-done
-
-apt-get autoremove --yes || true
-
-# Dropping logs
-rm -rf /var/log/*
-
-# Dropping documentation, localization, i18n files, etc
-rm -rf /usr/share/doc/*
-rm -rf /usr/share/locale/*
-rm -rf /usr/share/X11/locale/*
-rm -rf /usr/share/man
-rm -rf /usr/share/i18n/*
-rm -rf /usr/share/info/*
-rm -rf /usr/share/lintian/*
-rm -rf /usr/share/common-licenses/*
-rm -rf /usr/share/mime/*
-
-# Dropping reportbug scripts
-rm -rf /usr/share/bug
-
-# Drop udev hwdb not required on a stripped system
-rm -rf /lib/udev/hwdb.bin /lib/udev/hwdb.d/*
-
-# Drop all gconv conversions && binaries
-rm -rf usr/bin/iconv
-rm -rf usr/sbin/iconvconfig
-rm -rf usr/lib/*/gconv/
-
-# Remove libusb database
-rm -rf usr/sbin/update-usbids
-rm -rf var/lib/usbutils/usb.ids
-rm -rf usr/share/misc/usb.ids
-
-rm -rf /root/.pip
-
-#######################################################################
-# Crush into a minimal production image to be deployed via some type of image
-# updating system.
-# IMPORTANT: The Debian system is not longer functional at this point,
-# for example, apt and dpkg will stop working
-
-UNNEEDED_PACKAGES="apt libapt-pkg6.0 "\
-"ncurses-bin ncurses-base libncursesw6 libncurses6 "\
-"perl-base "\
-"debconf libdebconfclient0 "\
-"e2fsprogs e2fslibs libfdisk1 "\
-"insserv "\
-"udev "\
-"init-system-helpers "\
-"bash "\
-"cpio "\
-"xz-utils "\
-"passwd "\
-"libsemanage1 libsemanage-common "\
-"libsepol1 "\
-"gpgv "\
-"hostname "\
-"adduser "\
-"debian-archive-keyring "\
-"libegl1-mesa-dev "\
-"libegl-mesa0 "\
-"libgl1-mesa-dev "\
-"libgl1-mesa-dri "\
-"libglapi-mesa "\
-"libgles2-mesa-dev "\
-"libglx-mesa0 "\
-"mesa-common-dev "\
-
-# Removing unneeded packages
-for PACKAGE in ${UNNEEDED_PACKAGES}
-do
-	echo "Forcing removal of ${PACKAGE}"
-	if ! dpkg --purge --force-remove-essential --force-depends "${PACKAGE}"
-	then
-		echo "WARNING: ${PACKAGE} isn't installed"
-	fi
-done
-
-# Show what's left package-wise before dropping dpkg itself
-COLUMNS=300 dpkg-query -W --showformat='${Installed-Size;10}\t${Package}\n' | sort -k1,1n
-
-# Drop dpkg
-dpkg --purge --force-remove-essential --force-depends  dpkg
-
-# No apt or dpkg, no need for its configuration archives
-rm -rf etc/apt
-rm -rf etc/dpkg
-
-# Drop directories not part of ostree
-# Note that /var needs to exist as ostree bind mounts the deployment /var over
-# it
-rm -rf var/* opt srv share
-
-# ca-certificates are in /etc drop the source
-rm -rf usr/share/ca-certificates
-
-# No bash, no need for completions
-rm -rf usr/share/bash-completion
-
-# No zsh, no need for comletions
-rm -rf usr/share/zsh/vendor-completions
-
-# drop gcc python helpers
-rm -rf usr/share/gcc
-
-# Drop sysvinit leftovers
-rm -rf etc/init.d
-rm -rf etc/rc[0-6S].d
-
-# Drop upstart helpers
-rm -rf etc/init
-
-# Various xtables helpers
-rm -rf usr/lib/xtables
-
-# Drop all locales
-# TODO: only remaining locale is actually "C". Should we really remove it?
-rm -rf usr/lib/locale/*
-
-# partition helpers
-rm -rf usr/sbin/*fdisk
-
-# local compiler
-rm -rf usr/bin/localedef
-
-# Systemd dns resolver
-find usr etc -name '*systemd-resolve*' -prune -exec rm -r {} \;
-
-# Systemd network configuration
-find usr etc -name '*networkd*' -prune -exec rm -r {} \;
-
-# systemd ntp client
-find usr etc -name '*timesyncd*' -prune -exec rm -r {} \;
-
-# systemd hw database manager
-find usr etc -name '*systemd-hwdb*' -prune -exec rm -r {} \;
-
-# No need for fuse
-find usr etc -name '*fuse*' -prune -exec rm -r {} \;
-
-# lsb init function leftovers
-rm -rf usr/lib/lsb
-
-# Only needed when adding libraries
-rm -rf usr/sbin/ldconfig*
-
-# Games, unused
-rmdir usr/games
-
-# Remove pam module to authenticate against a DB
-# plus libdb-5.3.so that is only used by this pam module
-rm -rf usr/lib/*/security/pam_userdb.so
-rm -rf usr/lib/*/libdb-5.3.so
-
-# remove NSS support for nis, nisplus and hesiod
-rm -rf usr/lib/*/libnss_hesiod*
-rm -rf usr/lib/*/libnss_nis*

.gitlab-ci/container/cross_build.sh

@@ -1,79 +0,0 @@
-#!/bin/bash
-
-set -e
-set -o xtrace
-
-export DEBIAN_FRONTEND=noninteractive
-
-# Ephemeral packages (installed for this script and removed again at the end)
-STABLE_EPHEMERAL=" \
-        "
-
-dpkg --add-architecture $arch
-apt-get update
-
-apt-get install -y --no-remove \
-        $STABLE_EPHEMERAL \
-        crossbuild-essential-$arch \
-        libelf-dev:$arch \
-        libexpat1-dev:$arch \
-        libpciaccess-dev:$arch \
-        libstdc++6:$arch \
-        libvulkan-dev:$arch \
-        libx11-dev:$arch \
-        libx11-xcb-dev:$arch \
-        libxcb-dri2-0-dev:$arch \
-        libxcb-dri3-dev:$arch \
-        libxcb-glx0-dev:$arch \
-        libxcb-present-dev:$arch \
-        libxcb-randr0-dev:$arch \
-        libxcb-shm0-dev:$arch \
-        libxcb-xfixes0-dev:$arch \
-        libxdamage-dev:$arch \
-        libxext-dev:$arch \
-        libxrandr-dev:$arch \
-        libxshmfence-dev:$arch \
-        libxxf86vm-dev:$arch \
-        wget
-
-if [[ $arch != "armhf" ]]; then
-    if [[ $arch == "s390x" ]]; then
-        LLVM=9
-    else
-        LLVM=11
-    fi
-
-    # llvm-*-tools:$arch conflicts with python3:amd64. Install dependencies only
-    # with apt-get, then force-install llvm-*-{dev,tools}:$arch with dpkg to get
-    # around this.
-    apt-get install -y --no-remove \
-            libclang-cpp${LLVM}:$arch \
-            libffi-dev:$arch \
-            libgcc-s1:$arch \
-            libtinfo-dev:$arch \
-            libz3-dev:$arch \
-            llvm-${LLVM}:$arch \
-            zlib1g
-fi
-
-. .gitlab-ci/container/create-cross-file.sh $arch
-
-
-. .gitlab-ci/container/container_pre_build.sh
-
-
-# dependencies where we want a specific version
-EXTRA_MESON_ARGS="--cross-file=/cross_file-${arch}.txt -D libdir=lib/$(dpkg-architecture -A $arch -qDEB_TARGET_MULTIARCH)"
-. .gitlab-ci/container/build-libdrm.sh
-
-apt-get purge -y \
-        $STABLE_EPHEMERAL
-
-. .gitlab-ci/container/container_post_build.sh
-
-# This needs to be done after container_post_build.sh, or apt-get breaks in there
-if [[ $arch != "armhf" ]]; then
-    apt-get download llvm-${LLVM}-{dev,tools}:$arch
-    dpkg -i --force-depends llvm-${LLVM}-*_${arch}.deb
-    rm llvm-${LLVM}-*_${arch}.deb
-fi

.gitlab-ci/container/debian/android_build.sh

@@ -1,106 +0,0 @@
-#!/bin/bash
-
-set -ex
-
-EPHEMERAL="\
-         autoconf \
-         rdfind \
-         unzip \
-         "
-
-apt-get install -y --no-remove $EPHEMERAL
-
-# Fetch the NDK and extract just the toolchain we want.
-ndk=android-ndk-r21d
-wget -O $ndk.zip https://dl.google.com/android/repository/$ndk-linux-x86_64.zip
-unzip -d / $ndk.zip "$ndk/toolchains/llvm/*"
-rm $ndk.zip
-# Since it was packed as a zip file, symlinks/hardlinks got turned into
-# duplicate files.  Turn them into hardlinks to save on container space.
-rdfind -makehardlinks true -makeresultsfile false /android-ndk-r21d/
-# Drop some large tools we won't use in this build.
-find /android-ndk-r21d/ -type f | egrep -i "clang-check|clang-tidy|lldb" | xargs rm -f
-
-sh .gitlab-ci/container/create-android-ndk-pc.sh /$ndk zlib.pc "" "-lz" "1.2.3"
-
-sh .gitlab-ci/container/create-android-cross-file.sh /$ndk x86_64-linux-android x86_64 x86_64
-sh .gitlab-ci/container/create-android-cross-file.sh /$ndk i686-linux-android x86 x86
-sh .gitlab-ci/container/create-android-cross-file.sh /$ndk aarch64-linux-android arm armv8
-sh .gitlab-ci/container/create-android-cross-file.sh /$ndk arm-linux-androideabi arm armv7hl armv7a-linux-androideabi
-
-# Not using build-libdrm.sh because we don't want its cleanup after building
-# each arch.  Fetch and extract now.
-export LIBDRM_VERSION=libdrm-2.4.109
-wget https://dri.freedesktop.org/libdrm/$LIBDRM_VERSION.tar.xz
-tar -xf $LIBDRM_VERSION.tar.xz && rm $LIBDRM_VERSION.tar.xz
-
-for arch in \
-        x86_64-linux-android \
-        i686-linux-android \
-        aarch64-linux-android \
-        arm-linux-androideabi ; do
-
-    cd $LIBDRM_VERSION
-    rm -rf build-$arch
-    meson build-$arch \
-          --cross-file=/cross_file-$arch.txt \
-          --libdir=lib/$arch \
-          -Dlibkms=false \
-          -Dnouveau=false \
-          -Dvc4=false \
-          -Detnaviv=false \
-          -Dfreedreno=false \
-          -Dintel=false \
-          -Dcairo-tests=false \
-          -Dvalgrind=false
-    ninja -C build-$arch install
-    cd ..
-done
-
-rm -rf $LIBDRM_VERSION
-
-export LIBELF_VERSION=libelf-0.8.13
-wget https://fossies.org/linux/misc/old/$LIBELF_VERSION.tar.gz
-
-# Not 100% sure who runs the mirror above so be extra careful
-if ! echo "4136d7b4c04df68b686570afa26988ac ${LIBELF_VERSION}.tar.gz" | md5sum -c -; then
-    echo "Checksum failed"
-    exit 1
-fi
-
-tar -xf ${LIBELF_VERSION}.tar.gz
-cd $LIBELF_VERSION
-
-# Work around a bug in the original configure not enabling __LIBELF64.
-autoreconf
-
-for arch in \
-        x86_64-linux-android \
-        i686-linux-android \
-        aarch64-linux-android \
-        arm-linux-androideabi ; do
-
-    ccarch=${arch}
-    if [ "${arch}" ==  'arm-linux-androideabi' ]
-    then
-       ccarch=armv7a-linux-androideabi
-    fi
-
-    export CC=/android-ndk-r21d/toolchains/llvm/prebuilt/linux-x86_64/bin/${arch}-ar
-    export CC=/android-ndk-r21d/toolchains/llvm/prebuilt/linux-x86_64/bin/${ccarch}29-clang
-    export CXX=/android-ndk-r21d/toolchains/llvm/prebuilt/linux-x86_64/bin/${ccarch}29-clang++
-    export LD=/android-ndk-r21d/toolchains/llvm/prebuilt/linux-x86_64/bin/${arch}-ld
-    export RANLIB=/android-ndk-r21d/toolchains/llvm/prebuilt/linux-x86_64/bin/${arch}-ranlib
-
-    # The configure script doesn't know about android, but doesn't really use the host anyway it
-    # seems
-    ./configure --host=x86_64-linux-gnu  --disable-nls --disable-shared \
-                --libdir=/usr/local/lib/${arch}
-    make install
-    make distclean
-done
-
-cd ..
-rm -rf $LIBELF_VERSION
-
-apt-get purge -y $EPHEMERAL

.gitlab-ci/container/debian/arm_build.sh

@@ -1,71 +0,0 @@
-#!/bin/bash
-
-set -e
-set -o xtrace
-
-apt-get -y install ca-certificates
-sed -i -e 's/http:\/\/deb/https:\/\/deb/g' /etc/apt/sources.list
-echo 'deb https://deb.debian.org/debian buster main' >/etc/apt/sources.list.d/buster.list
-apt-get update
-
-apt-get -y install \
-	abootimg \
-	autoconf \
-	automake \
-	bc \
-	bison \
-	ccache \
-	cmake \
-	debootstrap \
-	fastboot \
-	flex \
-	g++ \
-	git \
-	kmod \
-	libasan6 \
-	libdrm-dev \
-	libelf-dev \
-	libexpat1-dev \
-	libx11-dev \
-	libx11-xcb-dev \
-	libxcb-dri2-0-dev \
-	libxcb-dri3-dev \
-	libxcb-glx0-dev \
-	libxcb-present-dev \
-	libxcb-randr0-dev \
-	libxcb-shm0-dev \
-	libxcb-xfixes0-dev \
-	libxdamage-dev \
-	libxext-dev \
-	libxrandr-dev \
-	libxshmfence-dev \
-	libxxf86vm-dev \
-	llvm-11-dev \
-	meson \
-	pkg-config \
-	python3-mako \
-	python3-pil \
-	python3-pip \
-	python3-requests \
-	python3-setuptools \
-	u-boot-tools \
-	wget \
-	xz-utils \
-	zlib1g-dev
-
-# Not available anymore in bullseye
-apt-get install -y --no-remove -t buster \
-        android-sdk-ext4-utils
-
-pip3 install git+http://gitlab.freedesktop.org/freedesktop/ci-templates@34f4ade99434043f88e164933f570301fd18b125
-
-arch=armhf
-. .gitlab-ci/container/cross_build.sh
-
-. .gitlab-ci/container/container_pre_build.sh
-
-# dependencies where we want a specific version
-EXTRA_MESON_ARGS=
-. .gitlab-ci/container/build-libdrm.sh
-
-. .gitlab-ci/container/container_post_build.sh

.gitlab-ci/container/debian/arm_test.sh

@@ -1,33 +0,0 @@
-#!/bin/bash
-
-set -e
-set -o xtrace
-
-############### Install packages for baremetal testing
-apt-get install -y ca-certificates
-sed -i -e 's/http:\/\/deb/https:\/\/deb/g' /etc/apt/sources.list
-apt-get update
-
-apt-get install -y --no-remove \
-        abootimg \
-        cpio \
-        fastboot \
-        netcat \
-        procps \
-        python3-distutils \
-        python3-minimal \
-        python3-serial \
-        rsync \
-        snmp \
-        wget
-
-# setup SNMPv2 SMI MIB
-wget https://raw.githubusercontent.com/net-snmp/net-snmp/master/mibs/SNMPv2-SMI.txt \
-    -O /usr/share/snmp/mibs/SNMPv2-SMI.txt
-
-arch=arm64 . .gitlab-ci/container/baremetal_build.sh
-arch=armhf . .gitlab-ci/container/baremetal_build.sh
-
-# This firmware file from Debian bullseye causes hangs
-wget https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/qcom/a530_pfp.fw?id=d5f9eea5a251d43412b07f5295d03e97b89ac4a5 \
-     -O /rootfs-arm64/lib/firmware/qcom/a530_pfp.fw

.gitlab-ci/container/debian/i386_build.sh

@@ -1,5 +0,0 @@
-#!/bin/bash
-
-arch=i386
-
-. .gitlab-ci/container/cross_build.sh

.gitlab-ci/container/debian/ppc64el_build.sh

@@ -1,5 +0,0 @@
-#!/bin/bash
-
-arch=ppc64el
-
-. .gitlab-ci/container/cross_build.sh

.gitlab-ci/container/debian/s390x_build.sh

@@ -1,5 +0,0 @@
-#!/bin/bash
-
-arch=s390x
-
-. .gitlab-ci/container/cross_build.sh

.gitlab-ci/container/debian/x86_build-base.sh

@@ -1,81 +0,0 @@
-#!/bin/bash
-
-set -e
-set -o xtrace
-
-export DEBIAN_FRONTEND=noninteractive
-
-apt-get install -y ca-certificates
-
-sed -i -e 's/http:\/\/deb/https:\/\/deb/g' /etc/apt/sources.list
-
-# Ephemeral packages (installed for this script and removed again at
-# the end)
-STABLE_EPHEMERAL=" \
-        python3-pip \
-        python3-setuptools \
-        "
-
-apt-get update
-
-apt-get install -y --no-remove \
-        $STABLE_EPHEMERAL \
-        bison \
-        ccache \
-        dpkg-cross \
-        flex \
-        g++ \
-        g++-mingw-w64-x86-64 \
-        gcc \
-        git \
-        glslang-tools \
-        kmod \
-        libclang-11-dev \
-        libclang-9-dev \
-        libclc-dev \
-        libelf-dev \
-        libepoxy-dev \
-        libexpat1-dev \
-        libgtk-3-dev \
-        libllvm11 \
-        libllvm9 \
-        libomxil-bellagio-dev \
-        libpciaccess-dev \
-        libunwind-dev \
-        libva-dev \
-        libvdpau-dev \
-        libvulkan-dev \
-        libx11-dev \
-        libx11-xcb-dev \
-        libxext-dev \
-        libxml2-utils \
-        libxrandr-dev \
-        libxrender-dev \
-        libxshmfence-dev \
-        libxvmc-dev \
-        libxxf86vm-dev \
-        libz-mingw-w64-dev \
-        make \
-        meson \
-        pkg-config \
-        python3-mako \
-        python3-pil \
-        python3-requests \
-        qemu-user \
-        valgrind \
-        wget \
-        wine64 \
-        x11proto-dri2-dev \
-        x11proto-gl-dev \
-        x11proto-randr-dev \
-        xz-utils \
-        zlib1g-dev
-
-# Needed for ci-fairy, this revision is able to upload files to MinIO
-pip3 install git+http://gitlab.freedesktop.org/freedesktop/ci-templates@34f4ade99434043f88e164933f570301fd18b125
-
-############### Uninstall ephemeral packages
-
-apt-get purge -y $STABLE_EPHEMERAL
-
-. .gitlab-ci/container/container_post_build.sh

.gitlab-ci/container/debian/x86_build.sh

@@ -1,107 +0,0 @@
-#!/bin/bash
-
-set -e
-set -o xtrace
-
-export DEBIAN_FRONTEND=noninteractive
-
-# Ephemeral packages (installed for this script and removed again at the end)
-STABLE_EPHEMERAL=" \
-      autoconf \
-      automake \
-      autotools-dev \
-      bzip2 \
-      libtool \
-      python3-pip \
-      "
-
-# We need multiarch for Wine
-dpkg --add-architecture i386
-apt-get update
-
-apt-get install -y --no-remove \
-      $STABLE_EPHEMERAL \
-      check \
-      clang \
-      cmake \
-      libasan6 \
-      libarchive-dev \
-      libclang-cpp11-dev \
-      libgbm-dev \
-      libglvnd-dev \
-      libllvmspirvlib-dev \
-      liblua5.3-dev \
-      libxcb-dri2-0-dev \
-      libxcb-dri3-dev \
-      libxcb-glx0-dev \
-      libxcb-present-dev \
-      libxcb-randr0-dev \
-      libxcb-shm0-dev \
-      libxcb-sync-dev \
-      libxcb-xfixes0-dev \
-      libxcb1-dev \
-      libxml2-dev \
-      llvm-11-dev \
-      llvm-9-dev \
-      ocl-icd-opencl-dev \
-      procps \
-      spirv-tools \
-      strace \
-      time \
-      wine \
-      wine32
-
-
-. .gitlab-ci/container/container_pre_build.sh
-
-
-# Debian's pkg-config wrapers for mingw are broken, and there's no sign that
-# they're going to be fixed, so we'll just have to fix it ourselves
-# https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=930492
-cat >/usr/local/bin/x86_64-w64-mingw32-pkg-config <<EOF
-#!/bin/sh
-
-PKG_CONFIG_LIBDIR=/usr/x86_64-w64-mingw32/lib/pkgconfig pkg-config \$@
-EOF
-chmod +x /usr/local/bin/x86_64-w64-mingw32-pkg-config
-
-
-# dependencies where we want a specific version
-export              XORG_RELEASES=https://xorg.freedesktop.org/releases/individual
-
-export         XORGMACROS_VERSION=util-macros-1.19.0
-
-wget $XORG_RELEASES/util/$XORGMACROS_VERSION.tar.bz2
-tar -xvf $XORGMACROS_VERSION.tar.bz2 && rm $XORGMACROS_VERSION.tar.bz2
-cd $XORGMACROS_VERSION; ./configure; make install; cd ..
-rm -rf $XORGMACROS_VERSION
-
-. .gitlab-ci/container/build-libdrm.sh
-
-. .gitlab-ci/container/build-wayland.sh
-
-pushd /usr/local
-git clone https://gitlab.freedesktop.org/mesa/shader-db.git --depth 1
-rm -rf shader-db/.git
-cd shader-db
-make
-popd
-
-git clone https://github.com/microsoft/DirectX-Headers -b v1.0.1 --depth 1
-pushd DirectX-Headers
-mkdir build
-cd build
-meson .. --backend=ninja --buildtype=release -Dbuild-test=false
-ninja
-ninja install
-popd
-rm -rf DirectX-Headers
-
-pip3 install git+https://git.lavasoftware.org/lava/lavacli@3db3ddc45e5358908bc6a17448059ea2340492b7
-
-############### Uninstall the build software
-
-apt-get purge -y \
-      $STABLE_EPHEMERAL
-
-. .gitlab-ci/container/container_post_build.sh

.gitlab-ci/container/debian/x86_test-base.sh

@@ -1,70 +0,0 @@
-#!/bin/bash
-
-set -e
-set -o xtrace
-
-export DEBIAN_FRONTEND=noninteractive
-
-apt-get install -y ca-certificates
-
-sed -i -e 's/http:\/\/deb/https:\/\/deb/g' /etc/apt/sources.list
-
-# Ephemeral packages (installed for this script and removed again at
-# the end)
-STABLE_EPHEMERAL=" \
-      cargo \
-      python3-dev \
-      python3-pip \
-      python3-setuptools \
-      python3-wheel \
-      "
-
-apt-get update
-apt-get dist-upgrade -y
-
-apt-get install -y --no-remove \
-      git \
-      git-lfs \
-      libasan6 \
-      libexpat1 \
-      libllvm11 \
-      libllvm9 \
-      liblz4-1 \
-      libpng16-16 \
-      libpython3.9 \
-      libvulkan1 \
-      libwayland-client0 \
-      libwayland-server0 \
-      libxcb-ewmh2 \
-      libxcb-randr0 \
-      libxcb-xfixes0 \
-      libxkbcommon0 \
-      libxrandr2 \
-      libxrender1 \
-      python3-mako \
-      python3-numpy \
-      python3-packaging \
-      python3-pil \
-      python3-requests \
-      python3-six \
-      python3-yaml \
-      vulkan-tools \
-      waffle-utils \
-      xauth \
-      xvfb \
-      zlib1g
-
-apt-get install -y --no-install-recommends \
-      $STABLE_EPHEMERAL
-
-# Needed for ci-fairy, this revision is able to upload files to MinIO
-# and doesn't depend on git
-pip3 install git+http://gitlab.freedesktop.org/freedesktop/ci-templates@34f4ade99434043f88e164933f570301fd18b125
-
-############### Build dEQP runner
-. .gitlab-ci/container/build-deqp-runner.sh
-rm -rf ~/.cargo
-
-apt-get purge -y $STABLE_EPHEMERAL
-
-apt-get autoremove -y --purge

.gitlab-ci/container/debian/x86_test-gl.sh

@@ -1,122 +0,0 @@
-#!/bin/bash
-
-set -e
-set -o xtrace
-
-export DEBIAN_FRONTEND=noninteractive
-
-# Ephemeral packages (installed for this script and removed again at the end)
-STABLE_EPHEMERAL=" \
-      autoconf \
-      automake \
-      bc \
-      bison \
-      bzip2 \
-      ccache \
-      clang-11 \
-      cmake \
-      flex \
-      g++ \
-      glslang-tools \
-      libasound2-dev \
-      libcap-dev \
-      libclang-cpp11-dev \
-      libelf-dev \
-      libexpat1-dev \
-      libfdt-dev \
-      libgbm-dev \
-      libgles2-mesa-dev \
-      libllvmspirvlib-dev \
-      libpciaccess-dev \
-      libpng-dev \
-      libudev-dev \
-      libvulkan-dev \
-      libwaffle-dev \
-      libx11-xcb-dev \
-      libxcb-dri2-0-dev \
-      libxext-dev \
-      libxkbcommon-dev \
-      libxrender-dev \
-      llvm-11-dev \
-      llvm-spirv \
-      make \
-      meson \
-      ocl-icd-opencl-dev \
-      patch \
-      pkg-config \
-      python3-distutils \
-      xz-utils \
-      "
-
-apt-get install -y --no-remove \
-      $STABLE_EPHEMERAL \
-      clinfo \
-      iptables \
-      libclang-common-11-dev \
-      libclang-cpp11 \
-      libcap2 \
-      libegl1 \
-      libepoxy-dev \
-      libfdt1 \
-      libllvmspirvlib11 \
-      libxcb-shm0 \
-      ocl-icd-libopencl1 \
-      python3-lxml \
-      python3-renderdoc \
-      python3-simplejson \
-      spirv-tools \
-      sysvinit-core \
-      wget
-
-
-. .gitlab-ci/container/container_pre_build.sh
-
-############### Build libdrm
-
-. .gitlab-ci/container/build-libdrm.sh
-
-############### Build Wayland
-
-. .gitlab-ci/container/build-wayland.sh
-
-############### Build Crosvm
-
-. .gitlab-ci/container/build-rust.sh
-. .gitlab-ci/container/build-crosvm.sh
-rm -rf /root/.cargo
-rm -rf /root/.rustup
-
-############### Build kernel
-
-export DEFCONFIG="arch/x86/configs/x86_64_defconfig"
-export KERNEL_IMAGE_NAME=bzImage
-export KERNEL_ARCH=x86_64
-export DEBIAN_ARCH=amd64
-
-mkdir -p /lava-files/
-. .gitlab-ci/container/build-kernel.sh
-
-############### Build libclc
-
-. .gitlab-ci/container/build-libclc.sh
-
-############### Build piglit
-
-PIGLIT_OPTS="-DPIGLIT_BUILD_CL_TESTS=ON -DPIGLIT_BUILD_DMA_BUF_TESTS=ON" . .gitlab-ci/container/build-piglit.sh
-
-############### Build dEQP GL
-
-DEQP_TARGET=surfaceless . .gitlab-ci/container/build-deqp.sh
-
-############### Build apitrace
-
-. .gitlab-ci/container/build-apitrace.sh
-
-############### Uninstall the build software
-
-ccache --show-stats
-
-apt-get purge -y \
-      $STABLE_EPHEMERAL
-
-apt-get autoremove -y --purge

.gitlab-ci/container/debian/x86_test-vk.sh

@@ -1,164 +0,0 @@
-#!/bin/bash
-
-set -e
-set -o xtrace
-
-export DEBIAN_FRONTEND=noninteractive
-
-# Ephemeral packages (installed for this script and removed again at the end)
-STABLE_EPHEMERAL=" \
-      ccache \
-      cmake \
-      g++ \
-      g++-mingw-w64-i686-posix \
-      g++-mingw-w64-x86-64-posix \
-      glslang-tools \
-      libexpat1-dev \
-      libgbm-dev \
-      libgles2-mesa-dev \
-      liblz4-dev \
-      libpciaccess-dev \
-      libudev-dev \
-      libvulkan-dev \
-      libwaffle-dev \
-      libx11-xcb-dev \
-      libxcb-ewmh-dev \
-      libxcb-keysyms1-dev \
-      libxkbcommon-dev \
-      libxrandr-dev \
-      libxrender-dev \
-      libzstd-dev \
-      meson \
-      mingw-w64-i686-dev \
-      mingw-w64-tools \
-      mingw-w64-x86-64-dev \
-      p7zip \
-      patch \
-      pkg-config \
-      python3-distutils \
-      wget \
-      xz-utils \
-      "
-
-apt-get install -y --no-remove \
-      $STABLE_EPHEMERAL \
-      libxcb-shm0 \
-      python3-lxml \
-      python3-simplejson \
-      xinit \
-      xserver-xorg-video-amdgpu \
-      xserver-xorg-video-ati
-
-# We need multiarch for Wine
-dpkg --add-architecture i386
-
-apt-get update
-
-apt-get install -y --no-remove \
-      wine \
-      wine32 \
-      wine64
-
-function setup_wine() {
-    export WINEDEBUG="-all"
-    export WINEPREFIX="$1"
-
-    # We don't want crash dialogs
-    cat >crashdialog.reg <<EOF
-Windows Registry Editor Version 5.00
-
-[HKEY_CURRENT_USER\Software\Wine\WineDbg]
-"ShowCrashDialog"=dword:00000000
-
-EOF
-
-    # Set the wine prefix and disable the crash dialog
-    wine regedit crashdialog.reg
-    rm crashdialog.reg
-
-    # An immediate wine command may fail with: "${WINEPREFIX}: Not a
-    # valid wine prefix."  and that is just spit because of checking
-    # the existance of the system.reg file, which fails.  Just giving
-    # it a bit more of time for it to be created solves the problem
-    # ...
-    while ! test -f  "${WINEPREFIX}/system.reg"; do sleep 1; done
-}
-
-############### Install DXVK
-
-DXVK_VERSION="1.8.1"
-
-setup_wine "/dxvk-wine64"
-
-wget "https://github.com/doitsujin/dxvk/releases/download/v${DXVK_VERSION}/dxvk-${DXVK_VERSION}.tar.gz"
-tar xzpf dxvk-"${DXVK_VERSION}".tar.gz
-dxvk-"${DXVK_VERSION}"/setup_dxvk.sh install
-rm -rf dxvk-"${DXVK_VERSION}"
-rm dxvk-"${DXVK_VERSION}".tar.gz
-
-############### Install Windows' apitrace binaries
-
-APITRACE_VERSION="10.0"
-APITRACE_VERSION_DATE=""
-
-wget "https://github.com/apitrace/apitrace/releases/download/${APITRACE_VERSION}/apitrace-${APITRACE_VERSION}${APITRACE_VERSION_DATE}-win64.7z"
-7zr x "apitrace-${APITRACE_VERSION}${APITRACE_VERSION_DATE}-win64.7z" \
-      "apitrace-${APITRACE_VERSION}${APITRACE_VERSION_DATE}-win64/bin/apitrace.exe" \
-      "apitrace-${APITRACE_VERSION}${APITRACE_VERSION_DATE}-win64/bin/d3dretrace.exe"
-mv "apitrace-${APITRACE_VERSION}${APITRACE_VERSION_DATE}-win64" /apitrace-msvc-win64
-rm "apitrace-${APITRACE_VERSION}${APITRACE_VERSION_DATE}-win64.7z"
-
-# Add the apitrace path to the registry
-wine \
-    reg add "HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager\Environment" \
-    /v Path \
-    /t REG_EXPAND_SZ \
-    /d "C:\windows\system32;C:\windows;C:\windows\system32\wbem;Z:\apitrace-msvc-win64\bin" \
-    /f
-
-############### Building ...
-
-. .gitlab-ci/container/container_pre_build.sh
-
-############### Build libdrm
-
-. .gitlab-ci/container/build-libdrm.sh
-
-############### Build Wayland
-
-. .gitlab-ci/container/build-wayland.sh
-
-############### Build parallel-deqp-runner's hang-detection tool
-
-. .gitlab-ci/container/build-hang-detection.sh
-
-############### Build piglit
-
-PIGLIT_BUILD_TARGETS="piglit_replayer" . .gitlab-ci/container/build-piglit.sh
-
-############### Build Fossilize
-
-. .gitlab-ci/container/build-fossilize.sh
-
-############### Build dEQP VK
-
-. .gitlab-ci/container/build-deqp.sh
-
-############### Build gfxreconstruct
-
-. .gitlab-ci/container/build-gfxreconstruct.sh
-
-############### Build VKD3D-Proton
-
-setup_wine "/vkd3d-proton-wine64"
-
-. .gitlab-ci/container/build-vkd3d-proton.sh
-
-############### Uninstall the build software
-
-ccache --show-stats
-
-apt-get purge -y \
-      $STABLE_EPHEMERAL
-
-apt-get autoremove -y --purge

.gitlab-ci/container/fedora/x86_build.sh

@@ -1,98 +0,0 @@
-#!/bin/bash
-
-set -e
-set -o xtrace
-
-
-EPHEMERAL="
-        autoconf
-        automake
-        bzip2
-        git
-        libtool
-        pkgconfig(epoxy)
-        pkgconfig(gbm)
-        unzip
-        wget
-        xz
-        "
-
-dnf install -y --setopt=install_weak_deps=False \
-    bison \
-    ccache \
-    clang-devel \
-    flex \
-    gcc \
-    gcc-c++ \
-    gettext \
-    kernel-headers \
-    llvm-devel \
-    meson \
-    "pkgconfig(dri2proto)" \
-    "pkgconfig(expat)" \
-    "pkgconfig(glproto)" \
-    "pkgconfig(libclc)" \
-    "pkgconfig(libelf)" \
-    "pkgconfig(libglvnd)" \
-    "pkgconfig(libomxil-bellagio)" \
-    "pkgconfig(libselinux)" \
-    "pkgconfig(libva)" \
-    "pkgconfig(pciaccess)" \
-    "pkgconfig(vdpau)" \
-    "pkgconfig(vulkan)" \
-    "pkgconfig(x11)" \
-    "pkgconfig(x11-xcb)" \
-    "pkgconfig(xcb)" \
-    "pkgconfig(xcb-dri2)" \
-    "pkgconfig(xcb-dri3)" \
-    "pkgconfig(xcb-glx)" \
-    "pkgconfig(xcb-present)" \
-    "pkgconfig(xcb-randr)" \
-    "pkgconfig(xcb-sync)" \
-    "pkgconfig(xcb-xfixes)" \
-    "pkgconfig(xdamage)" \
-    "pkgconfig(xext)" \
-    "pkgconfig(xfixes)" \
-    "pkgconfig(xrandr)" \
-    "pkgconfig(xshmfence)" \
-    "pkgconfig(xxf86vm)" \
-    "pkgconfig(zlib)" \
-    python-unversioned-command \
-    python3-devel \
-    python3-mako \
-    python3-devel \
-    python3-mako \
-    vulkan-headers \
-    $EPHEMERAL
-
-
-. .gitlab-ci/container/container_pre_build.sh
-
-
-# dependencies where we want a specific version
-export              XORG_RELEASES=https://xorg.freedesktop.org/releases/individual
-
-export         XORGMACROS_VERSION=util-macros-1.19.0
-
-wget $XORG_RELEASES/util/$XORGMACROS_VERSION.tar.bz2
-tar -xvf $XORGMACROS_VERSION.tar.bz2 && rm $XORGMACROS_VERSION.tar.bz2
-cd $XORGMACROS_VERSION; ./configure; make install; cd ..
-rm -rf $XORGMACROS_VERSION
-
-. .gitlab-ci/container/build-libdrm.sh
-
-. .gitlab-ci/container/build-wayland.sh
-
-pushd /usr/local
-git clone https://gitlab.freedesktop.org/mesa/shader-db.git --depth 1
-rm -rf shader-db/.git
-cd shader-db
-make
-popd
-
-
-############### Uninstall the build software
-
-dnf remove -y $EPHEMERAL
-
-. .gitlab-ci/container/container_post_build.sh

.gitlab-ci/container/lava_build.sh

@@ -1,237 +0,0 @@
-#!/bin/bash
-
-set -e
-set -o xtrace
-
-export DEBIAN_FRONTEND=noninteractive
-
-check_minio()
-{
-    MINIO_PATH="${MINIO_HOST}/mesa-lava/$1/${DISTRIBUTION_TAG}/${DEBIAN_ARCH}"
-    if wget -q --method=HEAD "https://${MINIO_PATH}/done"; then
-        exit
-    fi
-}
-
-# If remote files are up-to-date, skip rebuilding them
-check_minio "${FDO_UPSTREAM_REPO}"
-check_minio "${CI_PROJECT_PATH}"
-
-. .gitlab-ci/container/container_pre_build.sh
-
-# Install rust, which we'll be using for deqp-runner.  It will be cleaned up at the end.
-. .gitlab-ci/container/build-rust.sh
-
-if [[ "$DEBIAN_ARCH" = "arm64" ]]; then
-    GCC_ARCH="aarch64-linux-gnu"
-    KERNEL_ARCH="arm64"
-    DEFCONFIG="arch/arm64/configs/defconfig"
-    DEVICE_TREES="arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dtb"
-    DEVICE_TREES+=" arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dtb"
-    DEVICE_TREES+=" arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dtb"
-    DEVICE_TREES+=" arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dtb"
-    DEVICE_TREES+=" arch/arm64/boot/dts/qcom/apq8016-sbc.dtb"
-    DEVICE_TREES+=" arch/arm64/boot/dts/qcom/apq8096-db820c.dtb"
-    DEVICE_TREES+=" arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dtb"
-    DEVICE_TREES+=" arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dtb"
-    DEVICE_TREES+=" arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots.dtb"
-    KERNEL_IMAGE_NAME="Image"
-elif [[ "$DEBIAN_ARCH" = "armhf" ]]; then
-    GCC_ARCH="arm-linux-gnueabihf"
-    KERNEL_ARCH="arm"
-    DEFCONFIG="arch/arm/configs/multi_v7_defconfig"
-    DEVICE_TREES="arch/arm/boot/dts/rk3288-veyron-jaq.dtb"
-    DEVICE_TREES+=" arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dtb"
-    DEVICE_TREES+=" arch/arm/boot/dts/imx6q-cubox-i.dtb"
-    KERNEL_IMAGE_NAME="zImage"
-    . .gitlab-ci/container/create-cross-file.sh armhf
-else
-    GCC_ARCH="x86_64-linux-gnu"
-    KERNEL_ARCH="x86_64"
-    DEFCONFIG="arch/x86/configs/x86_64_defconfig"
-    DEVICE_TREES=""
-    KERNEL_IMAGE_NAME="bzImage"
-    ARCH_PACKAGES="libva-dev"
-fi
-
-# Determine if we're in a cross build.
-if [[ -e /cross_file-$DEBIAN_ARCH.txt ]]; then
-    EXTRA_MESON_ARGS="--cross-file /cross_file-$DEBIAN_ARCH.txt"
-    EXTRA_CMAKE_ARGS="-DCMAKE_TOOLCHAIN_FILE=/toolchain-$DEBIAN_ARCH.cmake"
-
-    if [ $DEBIAN_ARCH = arm64 ]; then
-        RUST_TARGET="aarch64-unknown-linux-gnu"
-    elif [ $DEBIAN_ARCH = armhf ]; then
-        RUST_TARGET="armv7-unknown-linux-gnueabihf"
-    fi
-    rustup target add $RUST_TARGET
-    export EXTRA_CARGO_ARGS="--target $RUST_TARGET"
-
-    export ARCH=${KERNEL_ARCH}
-    export CROSS_COMPILE="${GCC_ARCH}-"
-fi
-
-apt-get update
-apt-get install -y --no-remove \
-                   ${ARCH_PACKAGES} \
-                   automake \
-                   bc \
-                   cmake \
-                   debootstrap \
-                   git \
-                   glslang-tools \
-                   libdrm-dev \
-                   libegl1-mesa-dev \
-                   libfontconfig-dev \
-                   libgbm-dev \
-                   libgl-dev \
-                   libgles2-mesa-dev \
-                   libglu1-mesa-dev \
-                   libglx-dev \
-                   libpng-dev \
-                   libssl-dev \
-                   libudev-dev \
-                   libvulkan-dev \
-                   libwaffle-dev \
-                   libwayland-dev \
-                   libx11-xcb-dev \
-                   libxcb-dri2-0-dev \
-                   libxkbcommon-dev \
-                   ninja-build \
-                   patch \
-                   python-is-python3 \
-                   python3-distutils \
-                   python3-mako \
-                   python3-numpy \
-                   python3-serial \
-                   unzip \
-                   wget
-
-
-if [[ "$DEBIAN_ARCH" = "armhf" ]]; then
-    apt-get install -y --no-remove \
-                       libegl1-mesa-dev:armhf \
-                       libelf-dev:armhf \
-                       libgbm-dev:armhf \
-                       libgles2-mesa-dev:armhf \
-                       libpng-dev:armhf \
-                       libudev-dev:armhf \
-                       libvulkan-dev:armhf \
-                       libwaffle-dev:armhf \
-                       libwayland-dev:armhf \
-                       libx11-xcb-dev:armhf \
-                       libxkbcommon-dev:armhf
-fi
-
-
-############### Building
-STRIP_CMD="${GCC_ARCH}-strip"
-mkdir -p /lava-files/rootfs-${DEBIAN_ARCH}
-
-
-############### Build apitrace
-. .gitlab-ci/container/build-apitrace.sh
-mkdir -p /lava-files/rootfs-${DEBIAN_ARCH}/apitrace
-mv /apitrace/build /lava-files/rootfs-${DEBIAN_ARCH}/apitrace
-rm -rf /apitrace
-
-
-############### Build dEQP runner
-. .gitlab-ci/container/build-deqp-runner.sh
-mkdir -p /lava-files/rootfs-${DEBIAN_ARCH}/usr/bin
-mv /usr/local/bin/*-runner /lava-files/rootfs-${DEBIAN_ARCH}/usr/bin/.
-
-
-############### Build dEQP
-DEQP_TARGET=surfaceless . .gitlab-ci/container/build-deqp.sh
-
-mv /deqp /lava-files/rootfs-${DEBIAN_ARCH}/.
-
-
-############### Build SKQP
-if [[ "$DEBIAN_ARCH" = "arm64" ]]; then
-    SKQP_ARCH="arm64" . .gitlab-ci/container/build-skqp.sh
-    mv /skqp /lava-files/rootfs-${DEBIAN_ARCH}/.
-fi
-
-
-############### Build piglit
-PIGLIT_OPTS="-DPIGLIT_BUILD_DMA_BUF_TESTS=ON" . .gitlab-ci/container/build-piglit.sh
-mv /piglit /lava-files/rootfs-${DEBIAN_ARCH}/.
-
-############### Build libva tests
-if [[ "$DEBIAN_ARCH" = "amd64" ]]; then
-    . .gitlab-ci/container/build-va-tools.sh
-    mv /va/bin/* /lava-files/rootfs-${DEBIAN_ARCH}/usr/bin/
-fi
-
-############### Build libdrm
-EXTRA_MESON_ARGS+=" -D prefix=/libdrm"
-. .gitlab-ci/container/build-libdrm.sh
-
-############### Build kernel
-. .gitlab-ci/container/build-kernel.sh
-
-############### Delete rust, since the tests won't be compiling anything.
-rm -rf /root/.cargo
-rm -rf /root/.rustup
-
-############### Create rootfs
-set +e
-if ! debootstrap \
-     --variant=minbase \
-     --arch=${DEBIAN_ARCH} \
-     --components main,contrib,non-free \
-     bullseye \
-     /lava-files/rootfs-${DEBIAN_ARCH}/ \
-     http://deb.debian.org/debian; then
-    cat /lava-files/rootfs-${DEBIAN_ARCH}/debootstrap/debootstrap.log
-    exit 1
-fi
-set -e
-
-cp .gitlab-ci/container/create-rootfs.sh /lava-files/rootfs-${DEBIAN_ARCH}/.
-chroot /lava-files/rootfs-${DEBIAN_ARCH} sh /create-rootfs.sh
-rm /lava-files/rootfs-${DEBIAN_ARCH}/create-rootfs.sh
-
-
-############### Install the built libdrm
-# Dependencies pulled during the creation of the rootfs may overwrite
-# the built libdrm. Hence, we add it after the rootfs has been already
-# created.
-mkdir -p /lava-files/rootfs-${DEBIAN_ARCH}/usr/lib/$GCC_ARCH
-find /libdrm/ -name lib\*\.so\* | xargs cp -t /lava-files/rootfs-${DEBIAN_ARCH}/usr/lib/$GCC_ARCH/.
-mkdir -p /lava-files/rootfs-${DEBIAN_ARCH}/libdrm/
-cp -Rp /libdrm/share /lava-files/rootfs-${DEBIAN_ARCH}/libdrm/share
-rm -rf /libdrm
-
-
-if [ ${DEBIAN_ARCH} = arm64 ]; then
-    # Make a gzipped copy of the Image for db410c.
-    gzip -k /lava-files/Image
-    KERNEL_IMAGE_NAME+=" Image.gz"
-fi
-
-du -ah /lava-files/rootfs-${DEBIAN_ARCH} | sort -h | tail -100
-pushd /lava-files/rootfs-${DEBIAN_ARCH}
-  tar czf /lava-files/lava-rootfs.tgz .
-popd
-
-. .gitlab-ci/container/container_post_build.sh
-
-############### Upload the files!
-ci-fairy minio login --token-file "${CI_JOB_JWT_FILE}"
-FILES_TO_UPLOAD="lava-rootfs.tgz \
-                 $KERNEL_IMAGE_NAME"
-
-if [[ -n $DEVICE_TREES ]]; then
-    FILES_TO_UPLOAD="$FILES_TO_UPLOAD $(basename -a $DEVICE_TREES)"
-fi
-
-for f in $FILES_TO_UPLOAD; do
-    ci-fairy minio cp /lava-files/$f \
-             minio://${MINIO_PATH}/$f
-done
-
-touch /lava-files/done
-ci-fairy minio cp /lava-files/done minio://${MINIO_PATH}/done

.gitlab-ci/container/x86_64.config

@@ -1,100 +0,0 @@
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_DEBUG_KERNEL=y
-
-CONFIG_PWM=y
-CONFIG_PM_DEVFREQ=y
-CONFIG_OF=y
-CONFIG_CROS_EC=y
-
-# abootimg with a 'dummy' rootfs fails with root=/dev/nfs
-CONFIG_BLK_DEV_INITRD=n
-
-CONFIG_DEVFREQ_GOV_PERFORMANCE=y
-CONFIG_DEVFREQ_GOV_POWERSAVE=y
-CONFIG_DEVFREQ_GOV_USERSPACE=y
-CONFIG_DEVFREQ_GOV_PASSIVE=y
-
-CONFIG_DRM=y
-CONFIG_DRM_PANEL_SIMPLE=y
-CONFIG_PWM_CROS_EC=y
-CONFIG_BACKLIGHT_PWM=y
-
-# Strip out some stuff we don't need for graphics testing, to reduce
-# the build.
-CONFIG_CAN=n
-CONFIG_WIRELESS=n
-CONFIG_RFKILL=n
-CONFIG_WLAN=n
-
-CONFIG_REGULATOR_FAN53555=y
-CONFIG_REGULATOR=y
-
-CONFIG_REGULATOR_VCTRL=y
-
-CONFIG_KASAN=n
-CONFIG_KASAN_INLINE=n
-CONFIG_STACKTRACE=n
-
-CONFIG_TMPFS=y
-
-CONFIG_PROVE_LOCKING=n
-CONFIG_DEBUG_LOCKDEP=n
-CONFIG_SOFTLOCKUP_DETECTOR=y
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
-
-CONFIG_DETECT_HUNG_TASK=y
-
-CONFIG_USB_USBNET=y
-CONFIG_NETDEVICES=y
-CONFIG_USB_NET_DRIVERS=y
-CONFIG_USB_RTL8152=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_SMSC95XX=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=y
-
-CONFIG_FW_LOADER_COMPRESS=y
-
-# options for AMD devices
-CONFIG_X86_AMD_PLATFORM_DEVICE=y
-CONFIG_ACPI_VIDEO=y
-CONFIG_X86_AMD_FREQ_SENSITIVITY=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_AMD=y
-CONFIG_DRM_AMDGPU=m
-CONFIG_DRM_AMDGPU_SI=y
-CONFIG_DRM_AMDGPU_USERPTR=y
-CONFIG_DRM_AMD_ACP=n
-CONFIG_ACPI_WMI=y
-CONFIG_MXM_WMI=y
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_SERIAL=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_CHROME_PLATFORMS=y
-
-#options for Intel devices
-CONFIG_MFD_INTEL_LPSS_PCI=y
-
-#options for KVM guests
-CONFIG_FUSE_FS=y
-CONFIG_HYPERVISOR_GUEST=y
-CONFIG_KVM=y
-CONFIG_KVM_GUEST=y
-CONFIG_VIRT_DRIVERS=y
-CONFIG_VIRTIO_FS=y
-CONFIG_DRM_VIRTIO_GPU=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_VIRTIO_NET=y
-CONFIG_VIRTIO_CONSOLE=y
-CONFIG_PARAVIRT=y
-CONFIG_VIRTIO_BLK=y
-CONFIG_VIRTUALIZATION=y
-CONFIG_VIRTIO=y
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_MMIO=y
-CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
-CONFIG_CRYPTO_DEV_VIRTIO=y
-CONFIG_HW_RANDOM_VIRTIO=y
-CONFIG_BLK_MQ_VIRTIO=y
-CONFIG_TUN=y

.gitlab-ci/cross-xfail-ppc64el

@@ -1 +0,0 @@
-lp_test_arit

.gitlab-ci/cross-xfail-s390x

@@ -1 +0,0 @@
-lp_test_format

.gitlab-ci/crosvm-init.sh

@@ -1,38 +0,0 @@
-#!/bin/sh
-
-set -e
-
-export DEQP_TEMP_DIR="$1"
-
-mount -t proc none /proc
-mount -t sysfs none /sys
-mkdir -p /dev/pts
-mount -t devpts devpts /dev/pts
-mount -t tmpfs tmpfs /tmp
-
-. $DEQP_TEMP_DIR/crosvm-env.sh
-
-# .gitlab-ci.yml script variable is using relative paths to install directory,
-# so change to that dir before running `crosvm-script`
-cd "${CI_PROJECT_DIR}"
-
-# The exception is the dEQP binary, since it needs to run from the directory
-# it's in
-if [ -d "${DEQP_BIN_DIR}" ]
-then
-    cd "${DEQP_BIN_DIR}"
-fi
-
-dmesg --level crit,err,warn -w >> $DEQP_TEMP_DIR/stderr &
-
-set +e
-stdbuf -oL sh $DEQP_TEMP_DIR/crosvm-script.sh 2>> $DEQP_TEMP_DIR/stderr >> $DEQP_TEMP_DIR/stdout
-echo $? > $DEQP_TEMP_DIR/exit_code
-set -e
-
-sync
-sleep 1
-
-poweroff -d -n -f || true
-
-sleep 1   # Just in case init would exit before the kernel shuts down the VM

.gitlab-ci/crosvm-runner.sh

@@ -1,58 +0,0 @@
-#!/bin/sh
-
-set -ex
-
-# This script can be called concurrently, pass arguments and env in a
-# per-instance tmp dir
-DEQP_TEMP_DIR=$(mktemp -d /tmp.XXXXXXXXXX)
-export DEQP_TEMP_DIR
-
-# The dEQP binary needs to run from the directory it's in
-if [ -n "${1##*.sh}" ] && [ -z "${1##*"deqp"*}" ]; then
-  DEQP_BIN_DIR=$(dirname "$1")
-  export DEQP_BIN_DIR
-fi
-
-# Securely pass the current variables to the crosvm environment
-CI_COMMON="$CI_PROJECT_DIR"/install/common
-echo "Variables passed through:"
-"${CI_COMMON}"/generate-env.sh | tee ${DEQP_TEMP_DIR}/crosvm-env.sh
-
-CROSVM_KERNEL_ARGS="quiet console=null root=my_root rw rootfstype=virtiofs init=$CI_PROJECT_DIR/install/crosvm-init.sh ip=192.168.30.2::192.168.30.1:255.255.255.0:crosvm:eth0 -- $DEQP_TEMP_DIR"
-
-# Set the crosvm-script as the arguments of the current script.
-echo "$@" > $DEQP_TEMP_DIR/crosvm-script.sh
-
-unset DISPLAY
-unset XDG_RUNTIME_DIR
-
-/usr/sbin/iptables-legacy -w -t nat -A POSTROUTING -o eth0 -j MASQUERADE
-echo 1 > /proc/sys/net/ipv4/ip_forward
-
-# Send output from guest to host
-touch $DEQP_TEMP_DIR/stderr $DEQP_TEMP_DIR/stdout
-tail -f $DEQP_TEMP_DIR/stderr >> /dev/stderr &
-ERR_TAIL_PID=$!
-tail -f $DEQP_TEMP_DIR/stdout >> /dev/stdout &
-OUT_TAIL_PID=$!
-
-trap "exit \$exit_code" INT TERM
-trap "exit_code=\$?; kill $ERR_TAIL_PID $OUT_TAIL_PID; rm -rf $DEQP_TEMP_DIR" EXIT
-
-# We aren't testing LLVMPipe here, so we don't need to validate NIR on the host
-NIR_DEBUG="novalidate" LIBGL_ALWAYS_SOFTWARE="true" GALLIUM_DRIVER="$CROSVM_GALLIUM_DRIVER" crosvm run \
-  --gpu "$CROSVM_GPU_ARGS" \
-  -m 4096 \
-  -c 2 \
-  --disable-sandbox \
-  --shared-dir /:my_root:type=fs:writeback=true:timeout=60:cache=always \
-  --host_ip=192.168.30.1 --netmask=255.255.255.0 --mac "AA:BB:CC:00:00:12" \
-  -p "$CROSVM_KERNEL_ARGS" \
-  /lava-files/bzImage > $DEQP_TEMP_DIR/crosvm 2>&1
-
-RET=$(cat $DEQP_TEMP_DIR/exit_code || true)
-
-# Got no exit code from the script, show crosvm output to help with debugging
-[ -n "$RET" ] || cat $DEQP_TEMP_DIR/crosvm || true
-
-exit ${RET:-1}

.gitlab-ci/debian-install.sh

@@ -0,0 +1,181 @@
+#!/bin/bash
+
+set -e
+set -o xtrace
+
+export DEBIAN_FRONTEND=noninteractive
+
+apt-get install -y \
+      apt-transport-https \
+      ca-certificates \
+      curl \
+      wget \
+      gnupg \
+      software-properties-common
+
+curl -fsSL https://apt.llvm.org/llvm-snapshot.gpg.key | apt-key add -
+add-apt-repository "deb https://apt.llvm.org/stretch/ llvm-toolchain-stretch-7 main"
+add-apt-repository "deb https://apt.llvm.org/stretch/ llvm-toolchain-stretch-8 main"
+
+sed -i -e 's/http:\/\/deb/https:\/\/deb/g' /etc/apt/sources.list
+echo 'deb https://deb.debian.org/debian stretch-backports main' >/etc/apt/sources.list.d/backports.list
+echo 'deb https://deb.debian.org/debian jessie main' >/etc/apt/sources.list.d/jessie.list
+
+apt-get update
+apt-get install -y -t stretch-backports \
+      llvm-3.4-dev \
+      llvm-3.9-dev \
+      libclang-3.9-dev \
+      llvm-5.0-dev \
+      llvm-6.0-dev \
+      llvm-7-dev \
+      g++ \
+      clang-8 \
+      libclang-7-dev
+
+# Install remaining packages from Debian buster to get newer versions
+add-apt-repository "deb https://deb.debian.org/debian/ buster main"
+add-apt-repository "deb https://deb.debian.org/debian/ buster-updates main"
+apt-get update
+apt-get install -y \
+      bzip2 \
+      zlib1g-dev \
+      pkg-config \
+      libxrender-dev \
+      libxdamage-dev \
+      libxxf86vm-dev \
+      gcc \
+      libclc-dev \
+      libxvmc-dev \
+      libomxil-bellagio-dev \
+      xz-utils \
+      libexpat1-dev \
+      libx11-xcb-dev \
+      libelf-dev \
+      libunwind-dev \
+      libglvnd-dev \
+      python-mako \
+      python3-mako \
+      meson \
+      scons
+
+# autotools build deps
+apt-get install -y \
+      automake \
+      libtool \
+      bison \
+      flex \
+      gettext \
+      make
+
+# for 64bit windows cross-builds
+apt-get install -y \
+      wine64 \
+      mingw-w64
+
+# dependencies where we want a specific version
+export              XORG_RELEASES=https://xorg.freedesktop.org/releases/individual
+export               XCB_RELEASES=https://xcb.freedesktop.org/dist
+export           WAYLAND_RELEASES=https://wayland.freedesktop.org/releases
+
+export         XORGMACROS_VERSION=util-macros-1.19.0
+export            GLPROTO_VERSION=glproto-1.4.17
+export          DRI2PROTO_VERSION=dri2proto-2.8
+export       LIBPCIACCESS_VERSION=libpciaccess-0.13.4
+export             LIBDRM_VERSION=libdrm-2.4.97
+export           XCBPROTO_VERSION=xcb-proto-1.13
+export         RANDRPROTO_VERSION=randrproto-1.3.0
+export          LIBXRANDR_VERSION=libXrandr-1.3.0
+export             LIBXCB_VERSION=libxcb-1.13
+export       LIBXSHMFENCE_VERSION=libxshmfence-1.3
+export           LIBVDPAU_VERSION=libvdpau-1.1
+export              LIBVA_VERSION=libva-1.7.0
+export         LIBWAYLAND_VERSION=wayland-1.15.0
+export  WAYLAND_PROTOCOLS_VERSION=wayland-protocols-1.8
+
+wget $XORG_RELEASES/util/$XORGMACROS_VERSION.tar.bz2
+tar -xvf $XORGMACROS_VERSION.tar.bz2 && rm $XORGMACROS_VERSION.tar.bz2
+cd $XORGMACROS_VERSION; ./configure; make install; cd ..
+rm -rf $XORGMACROS_VERSION
+
+wget $XORG_RELEASES/proto/$GLPROTO_VERSION.tar.bz2
+tar -xvf $GLPROTO_VERSION.tar.bz2 && rm $GLPROTO_VERSION.tar.bz2
+cd $GLPROTO_VERSION; ./configure; make install; cd ..
+rm -rf $GLPROTO_VERSION
+
+wget $XORG_RELEASES/proto/$DRI2PROTO_VERSION.tar.bz2
+tar -xvf $DRI2PROTO_VERSION.tar.bz2 && rm $DRI2PROTO_VERSION.tar.bz2
+cd $DRI2PROTO_VERSION; ./configure; make install; cd ..
+rm -rf $DRI2PROTO_VERSION
+
+wget $XCB_RELEASES/$XCBPROTO_VERSION.tar.bz2
+tar -xvf $XCBPROTO_VERSION.tar.bz2 && rm $XCBPROTO_VERSION.tar.bz2
+cd $XCBPROTO_VERSION; ./configure; make install; cd ..
+rm -rf $XCBPROTO_VERSION
+
+wget $XCB_RELEASES/$LIBXCB_VERSION.tar.bz2
+tar -xvf $LIBXCB_VERSION.tar.bz2 && rm $LIBXCB_VERSION.tar.bz2
+cd $LIBXCB_VERSION; ./configure; make install; cd ..
+rm -rf $LIBXCB_VERSION
+
+wget $XORG_RELEASES/lib/$LIBPCIACCESS_VERSION.tar.bz2
+tar -xvf $LIBPCIACCESS_VERSION.tar.bz2 && rm $LIBPCIACCESS_VERSION.tar.bz2
+cd $LIBPCIACCESS_VERSION; ./configure; make install; cd ..
+rm -rf $LIBPCIACCESS_VERSION
+
+wget https://dri.freedesktop.org/libdrm/$LIBDRM_VERSION.tar.bz2
+tar -xvf $LIBDRM_VERSION.tar.bz2 && rm $LIBDRM_VERSION.tar.bz2
+cd $LIBDRM_VERSION; ./configure --enable-vc4 --enable-freedreno --enable-etnaviv-experimental-api; make install; cd ..
+rm -rf $LIBDRM_VERSION
+
+wget $XORG_RELEASES/proto/$RANDRPROTO_VERSION.tar.bz2
+tar -xvf $RANDRPROTO_VERSION.tar.bz2 && rm $RANDRPROTO_VERSION.tar.bz2
+cd $RANDRPROTO_VERSION; ./configure; make install; cd ..
+rm -rf $RANDRPROTO_VERSION
+
+wget $XORG_RELEASES/lib/$LIBXRANDR_VERSION.tar.bz2
+tar -xvf $LIBXRANDR_VERSION.tar.bz2 && rm $LIBXRANDR_VERSION.tar.bz2
+cd $LIBXRANDR_VERSION; ./configure; make install; cd ..
+rm -rf $LIBXRANDR_VERSION
+
+wget $XORG_RELEASES/lib/$LIBXSHMFENCE_VERSION.tar.bz2
+tar -xvf $LIBXSHMFENCE_VERSION.tar.bz2 && rm $LIBXSHMFENCE_VERSION.tar.bz2
+cd $LIBXSHMFENCE_VERSION; ./configure; make install; cd ..
+rm -rf $LIBXSHMFENCE_VERSION
+
+wget https://people.freedesktop.org/~aplattner/vdpau/$LIBVDPAU_VERSION.tar.bz2
+tar -xvf $LIBVDPAU_VERSION.tar.bz2 && rm $LIBVDPAU_VERSION.tar.bz2
+cd $LIBVDPAU_VERSION; ./configure; make install; cd ..
+rm -rf $LIBVDPAU_VERSION
+
+wget https://www.freedesktop.org/software/vaapi/releases/libva/$LIBVA_VERSION.tar.bz2
+tar -xvf $LIBVA_VERSION.tar.bz2 && rm $LIBVA_VERSION.tar.bz2
+cd $LIBVA_VERSION; ./configure --disable-wayland --disable-dummy-driver; make install; cd ..
+rm -rf $LIBVA_VERSION
+
+wget $WAYLAND_RELEASES/$LIBWAYLAND_VERSION.tar.xz
+tar -xvf $LIBWAYLAND_VERSION.tar.xz && rm $LIBWAYLAND_VERSION.tar.xz
+cd $LIBWAYLAND_VERSION; ./configure --enable-libraries --without-host-scanner --disable-documentation --disable-dtd-validation; make install; cd ..
+rm -rf $LIBWAYLAND_VERSION
+
+wget $WAYLAND_RELEASES/$WAYLAND_PROTOCOLS_VERSION.tar.xz
+tar -xvf $WAYLAND_PROTOCOLS_VERSION.tar.xz && rm $WAYLAND_PROTOCOLS_VERSION.tar.xz
+cd $WAYLAND_PROTOCOLS_VERSION; ./configure; make install; cd ..
+rm -rf $WAYLAND_PROTOCOLS_VERSION
+
+# Use ccache to speed up builds
+apt-get install -y ccache
+
+# We need xmllint to validate the XML files in Mesa
+apt-get install -y libxml2-utils
+
+# Remove unused packages
+apt-get purge -y \
+      automake \
+      libtool \
+      make \
+      curl \
+      wget \
+      gnupg \
+      software-properties-common
+apt-get autoremove -y --purge

.gitlab-ci/deqp-runner.sh

@@ -1,216 +0,0 @@
-#!/bin/sh
-
-set -ex
-
-# Needed so configuration files can contain paths to files in /install
-ln -sf $CI_PROJECT_DIR/install /install
-
-if [ -z "$GPU_VERSION" ]; then
-   echo 'GPU_VERSION must be set to something like "llvmpipe" or "freedreno-a630" (the name used in .gitlab-ci/gpu-version-*.txt)'
-   exit 1
-fi
-
-INSTALL=`pwd`/install
-
-# Set up the driver environment.
-export LD_LIBRARY_PATH=`pwd`/install/lib/
-export EGL_PLATFORM=surfaceless
-export VK_ICD_FILENAMES=`pwd`/install/share/vulkan/icd.d/"$VK_DRIVER"_icd.${VK_CPU:-`uname -m`}.json
-
-RESULTS=`pwd`/${DEQP_RESULTS_DIR:-results}
-mkdir -p $RESULTS
-
-HANG_DETECTION_CMD=""
-
-if [ -z "$DEQP_SUITE" ]; then
-    if [ -z "$DEQP_VER" ]; then
-        echo 'DEQP_SUITE must be set to the name of your deqp-gpu_version.toml, or DEQP_VER must be set to something like "gles2", "gles31-khr" or "vk" for the test run'
-        exit 1
-    fi
-
-    DEQP_WIDTH=${DEQP_WIDTH:-256}
-    DEQP_HEIGHT=${DEQP_HEIGHT:-256}
-    DEQP_CONFIG=${DEQP_CONFIG:-rgba8888d24s8ms0}
-    DEQP_VARIANT=${DEQP_VARIANT:-master}
-
-    DEQP_OPTIONS="$DEQP_OPTIONS --deqp-surface-width=$DEQP_WIDTH --deqp-surface-height=$DEQP_HEIGHT"
-    DEQP_OPTIONS="$DEQP_OPTIONS --deqp-surface-type=${DEQP_SURFACE_TYPE:-pbuffer}"
-    DEQP_OPTIONS="$DEQP_OPTIONS --deqp-gl-config-name=$DEQP_CONFIG"
-    DEQP_OPTIONS="$DEQP_OPTIONS --deqp-visibility=hidden"
-
-    if [ "$DEQP_VER" = "vk" -a -z "$VK_DRIVER" ]; then
-        echo 'VK_DRIVER must be to something like "radeon" or "intel" for the test run'
-        exit 1
-    fi
-
-    # Generate test case list file.
-    if [ "$DEQP_VER" = "vk" ]; then
-       MUSTPASS=/deqp/mustpass/vk-$DEQP_VARIANT.txt
-       DEQP=/deqp/external/vulkancts/modules/vulkan/deqp-vk
-       HANG_DETECTION_CMD="/parallel-deqp-runner/build/bin/hang-detection"
-    elif [ "$DEQP_VER" = "gles2" -o "$DEQP_VER" = "gles3" -o "$DEQP_VER" = "gles31" -o "$DEQP_VER" = "egl" ]; then
-       MUSTPASS=/deqp/mustpass/$DEQP_VER-$DEQP_VARIANT.txt
-       DEQP=/deqp/modules/$DEQP_VER/deqp-$DEQP_VER
-    elif [ "$DEQP_VER" = "gles2-khr" -o "$DEQP_VER" = "gles3-khr" -o "$DEQP_VER" = "gles31-khr" -o "$DEQP_VER" = "gles32-khr" ]; then
-       MUSTPASS=/deqp/mustpass/$DEQP_VER-$DEQP_VARIANT.txt
-       DEQP=/deqp/external/openglcts/modules/glcts
-    else
-       MUSTPASS=/deqp/mustpass/$DEQP_VER-$DEQP_VARIANT.txt
-       DEQP=/deqp/external/openglcts/modules/glcts
-    fi
-
-    cp $MUSTPASS /tmp/case-list.txt
-
-    # If the caselist is too long to run in a reasonable amount of time, let the job
-    # specify what fraction (1/n) of the caselist we should run.  Note: N~M is a gnu
-    # sed extension to match every nth line (first line is #1).
-    if [ -n "$DEQP_FRACTION" ]; then
-       sed -ni 1~$DEQP_FRACTION"p" /tmp/case-list.txt
-    fi
-
-    # If the job is parallel at the gitab job level, take the corresponding fraction
-    # of the caselist.
-    if [ -n "$CI_NODE_INDEX" ]; then
-       sed -ni $CI_NODE_INDEX~$CI_NODE_TOTAL"p" /tmp/case-list.txt
-    fi
-
-    if [ -n "$DEQP_CASELIST_FILTER" ]; then
-        sed -ni "/$DEQP_CASELIST_FILTER/p" /tmp/case-list.txt
-    fi
-
-    if [ -n "$DEQP_CASELIST_INV_FILTER" ]; then
-        sed -ni "/$DEQP_CASELIST_INV_FILTER/!p" /tmp/case-list.txt
-    fi
-
-    if [ ! -s /tmp/case-list.txt ]; then
-        echo "Caselist generation failed"
-        exit 1
-    fi
-fi
-
-if [ -e "$INSTALL/$GPU_VERSION-fails.txt" ]; then
-    DEQP_RUNNER_OPTIONS="$DEQP_RUNNER_OPTIONS --baseline $INSTALL/$GPU_VERSION-fails.txt"
-fi
-
-# Default to an empty known flakes file if it doesn't exist.
-touch $INSTALL/$GPU_VERSION-flakes.txt
-
-
-if [ -n "$VK_DRIVER" ] && [ -e "$INSTALL/$VK_DRIVER-skips.txt" ]; then
-    DEQP_SKIPS="$DEQP_SKIPS $INSTALL/$VK_DRIVER-skips.txt"
-fi
-
-if [ -n "$GALLIUM_DRIVER" ] && [ -e "$INSTALL/$GALLIUM_DRIVER-skips.txt" ]; then
-    DEQP_SKIPS="$DEQP_SKIPS $INSTALL/$GALLIUM_DRIVER-skips.txt"
-fi
-
-if [ -n "$DRIVER_NAME" ] && [ -e "$INSTALL/$DRIVER_NAME-skips.txt" ]; then
-    DEQP_SKIPS="$DEQP_SKIPS $INSTALL/$DRIVER_NAME-skips.txt"
-fi
-
-if [ -e "$INSTALL/$GPU_VERSION-skips.txt" ]; then
-    DEQP_SKIPS="$DEQP_SKIPS $INSTALL/$GPU_VERSION-skips.txt"
-fi
-
-set +e
-
-report_load() {
-    echo "System load: $(cut -d' ' -f1-3 < /proc/loadavg)"
-    echo "# of CPU cores: $(cat /proc/cpuinfo | grep processor | wc -l)"
-}
-
-# wrapper to supress +x to avoid spamming the log
-quiet() {
-    set +x
-    "$@"
-    set -x
-}
-
-if [ "$GALLIUM_DRIVER" = "virpipe" ]; then
-    # deqp is to use virpipe, and virgl_test_server llvmpipe
-    export GALLIUM_DRIVER="$GALLIUM_DRIVER"
-
-    VTEST_ARGS="--use-egl-surfaceless"
-    if [ "$VIRGL_HOST_API" = "GLES" ]; then
-        VTEST_ARGS="$VTEST_ARGS --use-gles"
-    fi
-
-    GALLIUM_DRIVER=llvmpipe \
-    virgl_test_server $VTEST_ARGS >$RESULTS/vtest-log.txt 2>&1 &
-
-    sleep 1
-fi
-
-if [ -z "$DEQP_SUITE" ]; then
-    if [ -n "$DEQP_EXPECTED_RENDERER" ]; then
-        export DEQP_RUNNER_OPTIONS="$DEQP_RUNNER_OPTIONS --renderer-check "$DEQP_EXPECTED_RENDERER""
-    fi
-    if [ $DEQP_VER != vk -a $DEQP_VER != egl ]; then
-        export DEQP_RUNNER_OPTIONS="$DEQP_RUNNER_OPTIONS --version-check `cat $INSTALL/VERSION | sed 's/[() ]/./g'`"
-    fi
-
-    deqp-runner \
-        run \
-        --deqp $DEQP \
-        --output $RESULTS \
-        --caselist /tmp/case-list.txt \
-        --skips $INSTALL/all-skips.txt $DEQP_SKIPS \
-        --flakes $INSTALL/$GPU_VERSION-flakes.txt \
-        --testlog-to-xml /deqp/executor/testlog-to-xml \
-        --jobs ${FDO_CI_CONCURRENT:-4} \
-	$DEQP_RUNNER_OPTIONS \
-        -- \
-        $DEQP_OPTIONS
-else
-    deqp-runner \
-        suite \
-        --suite $INSTALL/deqp-$DEQP_SUITE.toml \
-        --output $RESULTS \
-        --skips $INSTALL/all-skips.txt $DEQP_SKIPS \
-        --flakes $INSTALL/$GPU_VERSION-flakes.txt \
-        --testlog-to-xml /deqp/executor/testlog-to-xml \
-        --fraction-start $CI_NODE_INDEX \
-        --fraction $CI_NODE_TOTAL \
-        --jobs ${FDO_CI_CONCURRENT:-4} \
-	$DEQP_RUNNER_OPTIONS
-fi
-
-DEQP_EXITCODE=$?
-
-quiet report_load
-
-# Remove all but the first 50 individual XML files uploaded as artifacts, to
-# save fd.o space when you break everything.
-find $RESULTS -name \*.xml | \
-    sort -n |
-    sed -n '1,+49!p' | \
-    xargs rm -f
-
-# If any QPA XMLs are there, then include the XSL/CSS in our artifacts.
-find $RESULTS -name \*.xml \
-    -exec cp /deqp/testlog.css /deqp/testlog.xsl "$RESULTS/" ";" \
-    -quit
-
-deqp-runner junit \
-   --testsuite dEQP \
-   --results $RESULTS/failures.csv \
-   --output $RESULTS/junit.xml \
-   --limit 50 \
-   --template "See https://$CI_PROJECT_ROOT_NAMESPACE.pages.freedesktop.org/-/$CI_PROJECT_NAME/-/jobs/$CI_JOB_ID/artifacts/results/{{testcase}}.xml"
-
-# Report the flakes to the IRC channel for monitoring (if configured):
-if [ -n "$FLAKES_CHANNEL" ]; then
-  python3 $INSTALL/report-flakes.py \
-         --host irc.oftc.net \
-         --port 6667 \
-         --results $RESULTS/results.csv \
-         --known-flakes $INSTALL/$GPU_VERSION-flakes.txt \
-         --channel "$FLAKES_CHANNEL" \
-         --runner "$CI_RUNNER_DESCRIPTION" \
-         --job "$CI_JOB_ID" \
-         --url "$CI_JOB_URL" \
-         --branch "${CI_MERGE_REQUEST_SOURCE_BRANCH_NAME:-$CI_COMMIT_BRANCH}" \
-         --branch-title "${CI_MERGE_REQUEST_TITLE:-$CI_COMMIT_TITLE}"
-fi
-
-exit $DEQP_EXITCODE

.gitlab-ci/docs

@@ -1 +0,0 @@
-../docs/ci

.gitlab-ci/download-git-cache.sh

@@ -1,36 +0,0 @@
-#!/bin/bash
-
-set +e
-set -o xtrace
-
-# if we run this script outside of gitlab-ci for testing, ensure
-# we got meaningful variables
-CI_PROJECT_DIR=${CI_PROJECT_DIR:-$(mktemp -d)/mesa}
-
-if [[ -e $CI_PROJECT_DIR/.git ]]
-then
-    echo "Repository already present, skip cache download"
-    exit
-fi
-
-TMP_DIR=$(mktemp -d)
-
-echo "Downloading archived master..."
-/usr/bin/wget -O $TMP_DIR/mesa.tar.gz \
-              https://${MINIO_HOST}/git-cache/${FDO_UPSTREAM_REPO}/mesa.tar.gz
-
-# check wget error code
-if [[ $? -ne 0 ]]
-then
-    echo "Repository cache not available"
-    exit
-fi
-
-set -e
-
-rm -rf "$CI_PROJECT_DIR"
-echo "Extracting tarball into '$CI_PROJECT_DIR'..."
-mkdir -p "$CI_PROJECT_DIR"
-tar xzf "$TMP_DIR/mesa.tar.gz" -C "$CI_PROJECT_DIR"
-rm -rf "$TMP_DIR"
-chmod a+w "$CI_PROJECT_DIR"

.gitlab-ci/fossilize-runner.sh

@@ -1,20 +0,0 @@
-#!/bin/sh
-
-set -ex
-
-if [ -z "$VK_DRIVER" ]; then
-   echo 'VK_DRIVER must be to something like "radeon" or "intel" for the test run'
-   exit 1
-fi
-
-INSTALL=`pwd`/install
-
-# Set up the driver environment.
-export LD_LIBRARY_PATH=`pwd`/install/lib/
-export VK_ICD_FILENAMES=`pwd`/install/share/vulkan/icd.d/"$VK_DRIVER"_icd.x86_64.json
-
-# To store Fossilize logs on failure.
-RESULTS=`pwd`/results
-mkdir -p results
-
-"$INSTALL/fossils/fossils.sh" "$INSTALL/fossils.yml" "$RESULTS"

.gitlab-ci/fossils.yml

@@ -1,10 +0,0 @@
-fossils-db:
-  repo: "https://gitlab.freedesktop.org/hakzsam/fossils-db"
-  commit: "5626cedcb58bd95a7b79a9664651818aea92b21c"
-
-fossils:
-  - path: sascha-willems/database.foz
-  - path: parallel-rdp/small_subgroup.foz
-  - path: parallel-rdp/small_uber_subgroup.foz
-  - path: parallel-rdp/subgroup.foz
-  - path: parallel-rdp/uber_subgroup.foz

.gitlab-ci/fossils/fossils.sh

@@ -1,77 +0,0 @@
-#!/usr/bin/env bash
-
-FOSSILS_SCRIPT_DIR="$(dirname "$(readlink -f "$0")")"
-FOSSILS_YAML="$(readlink -f "$1")"
-FOSSILS_RESULTS="$2"
-
-clone_fossils_db()
-{
-    local repo="$1"
-    local commit="$2"
-    rm -rf fossils-db
-    git clone --no-checkout "$repo" fossils-db
-    (cd fossils-db; git reset "$commit" || git reset "origin/$commit")
-}
-
-query_fossils_yaml()
-{
-    python3 "$FOSSILS_SCRIPT_DIR/query_fossils_yaml.py" \
-        --file "$FOSSILS_YAML" "$@"
-}
-
-create_clean_git()
-{
-    rm -rf .clean_git
-    cp -R .git .clean_git
-}
-
-restore_clean_git()
-{
-    rm -rf .git
-    cp -R .clean_git .git
-}
-
-fetch_fossil()
-{
-    local fossil="${1//,/?}"
-    echo -n "[fetch_fossil] Fetching $1... "
-    local output=$(git lfs pull -I "$fossil" 2>&1)
-    local ret=0
-    if [[ $? -ne 0 || ! -f "$1" ]]; then
-        echo "ERROR"
-        echo "$output"
-        ret=1
-    else
-        echo "OK"
-    fi
-    restore_clean_git
-    return $ret
-}
-
-if [[ -n "$(query_fossils_yaml fossils_db_repo)" ]]; then
-    clone_fossils_db "$(query_fossils_yaml fossils_db_repo)" \
-                     "$(query_fossils_yaml fossils_db_commit)"
-    cd fossils-db
-else
-    echo "Warning: No fossils-db entry in $FOSSILS_YAML, assuming fossils-db is current directory"
-fi
-
-# During git operations various git objects get created which
-# may take up significant space. Store a clean .git instance,
-# which we restore after various git operations to keep our
-# storage consumption low.
-create_clean_git
-
-for fossil in $(query_fossils_yaml fossils)
-do
-    fetch_fossil "$fossil" || exit $?
-    fossilize-replay --num-threads 4 $fossil 1>&2 2> $FOSSILS_RESULTS/fossil_replay.txt
-    if [ $? != 0 ]; then
-        echo "Replay of $fossil failed"
-        grep "pipeline crashed or hung" $FOSSILS_RESULTS/fossil_replay.txt
-        exit 1
-    fi
-    rm $fossil
-done
-
-exit $ret

.gitlab-ci/fossils/query_fossils_yaml.py

@@ -1,69 +0,0 @@
-#!/usr/bin/python3
-
-# Copyright (c) 2019 Collabora Ltd
-# Copyright (c) 2020 Valve Corporation
-#
-# Permission is hereby granted, free of charge, to any person obtaining a
-# copy of this software and associated documentation files (the "Software"),
-# to deal in the Software without restriction, including without limitation
-# the rights to use, copy, modify, merge, publish, distribute, sublicense,
-# and/or sell copies of the Software, and to permit persons to whom the
-# Software is furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included
-# in all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
-# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
-# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
-# OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
-# ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-# OTHER DEALINGS IN THE SOFTWARE.
-#
-# SPDX-License-Identifier: MIT
-
-import argparse
-import yaml
-
-def cmd_fossils_db_repo(args):
-    with open(args.file, 'r') as f:
-        y = yaml.safe_load(f)
-    print(y['fossils-db']['repo'])
-
-def cmd_fossils_db_commit(args):
-    with open(args.file, 'r') as f:
-        y = yaml.safe_load(f)
-    print(y['fossils-db']['commit'])
-
-def cmd_fossils(args):
-    with open(args.file, 'r') as f:
-        y = yaml.safe_load(f)
-
-    fossils = list(y['fossils'])
-    if len(fossils) == 0:
-        return
-
-    print('\n'.join((t['path'] for t in fossils)))
-
-def main():
-    parser = argparse.ArgumentParser()
-    parser.add_argument('--file', required=True,
-                        help='the name of the yaml file')
-
-    subparsers = parser.add_subparsers(help='sub-command help')
-
-    parser_fossils_db_repo = subparsers.add_parser('fossils_db_repo')
-    parser_fossils_db_repo.set_defaults(func=cmd_fossils_db_repo)
-
-    parser_fossils_db_commit = subparsers.add_parser('fossils_db_commit')
-    parser_fossils_db_commit.set_defaults(func=cmd_fossils_db_commit)
-
-    parser_fossils = subparsers.add_parser('fossils')
-    parser_fossils.set_defaults(func=cmd_fossils)
-
-    args = parser.parse_args()
-    args.func(args)
-
-if __name__ == "__main__":
-    main()

.gitlab-ci/gtest-runner.sh

@@ -1,70 +0,0 @@
-#!/bin/sh
-
-set -ex
-
-INSTALL=`pwd`/install
-
-# Set up the driver environment.
-export LD_LIBRARY_PATH=`pwd`/install/lib/
-export LIBVA_DRIVERS_PATH=`pwd`/install/lib/dri/
-# libva spams driver open info by default, and that happens per testcase.
-export LIBVA_MESSAGING_LEVEL=1
-
-if [ -e "$INSTALL/$GPU_VERSION-fails.txt" ]; then
-    GTEST_RUNNER_OPTIONS="$GTEST_RUNNER_OPTIONS --baseline $INSTALL/$GPU_VERSION-fails.txt"
-fi
-
-# Default to an empty known flakes file if it doesn't exist.
-touch $INSTALL/$GPU_VERSION-flakes.txt
-
-if [ -n "$GALLIUM_DRIVER" ] && [ -e "$INSTALL/$GALLIUM_DRIVER-skips.txt" ]; then
-    GTEST_SKIPS="$GTEST_SKIPS --skips $INSTALL/$GALLIUM_DRIVER-skips.txt"
-fi
-
-if [ -n "$DRIVER_NAME" ] && [ -e "$INSTALL/$DRIVER_NAME-skips.txt" ]; then
-    GTEST_SKIPS="$GTEST_SKIPS --skips $INSTALL/$DRIVER_NAME-skips.txt"
-fi
-
-if [ -e "$INSTALL/$GPU_VERSION-skips.txt" ]; then
-    GTEST_SKIPS="$GTEST_SKIPS --skips $INSTALL/$GPU_VERSION-skips.txt"
-fi
-
-set +e
-
-gtest-runner \
-    run \
-    --gtest $GTEST \
-    --output ${GTEST_RESULTS_DIR:-results} \
-    --jobs ${FDO_CI_CONCURRENT:-4} \
-    $GTEST_SKIPS \
-    --flakes $INSTALL/$GPU_VERSION-flakes.txt \
-    --fraction-start ${CI_NODE_INDEX:-1} \
-    --fraction $((${CI_NODE_TOTAL:-1} * ${GTEST_FRACTION:-1})) \
-    --env "LD_PRELOAD=$TEST_LD_PRELOAD" \
-    $GTEST_RUNNER_OPTIONS
-
-GTEST_EXITCODE=$?
-
-deqp-runner junit \
-   --testsuite gtest \
-   --results $RESULTS/failures.csv \
-   --output $RESULTS/junit.xml \
-   --limit 50 \
-   --template "See https://$CI_PROJECT_ROOT_NAMESPACE.pages.freedesktop.org/-/$CI_PROJECT_NAME/-/jobs/$CI_JOB_ID/artifacts/results/{{testcase}}.xml"
-
-# Report the flakes to the IRC channel for monitoring (if configured):
-if [ -n "$FLAKES_CHANNEL" ]; then
-  python3 $INSTALL/report-flakes.py \
-         --host irc.oftc.net \
-         --port 6667 \
-         --results $RESULTS/results.csv \
-         --known-flakes $INSTALL/$GPU_VERSION-flakes.txt \
-         --channel "$FLAKES_CHANNEL" \
-         --runner "$CI_RUNNER_DESCRIPTION" \
-         --job "$CI_JOB_ID" \
-         --url "$CI_JOB_URL" \
-         --branch "${CI_MERGE_REQUEST_SOURCE_BRANCH_NAME:-$CI_COMMIT_BRANCH}" \
-         --branch-title "${CI_MERGE_REQUEST_TITLE:-$CI_COMMIT_TITLE}"
-fi
-
-exit $GTEST_EXITCODE

.gitlab-ci/image-tags.yml

@@ -1,21 +0,0 @@
-variables:
-   DEBIAN_X86_BUILD_BASE_IMAGE: "debian/x86_build-base"
-   DEBIAN_BASE_TAG: "2022-01-02-deqp-runner"
-
-   DEBIAN_X86_BUILD_IMAGE_PATH: "debian/x86_build"
-   DEBIAN_BUILD_TAG: "2021-12-31-keep-cmake"
-
-   DEBIAN_X86_TEST_BASE_IMAGE: "debian/x86_test-base"
-
-   DEBIAN_X86_TEST_IMAGE_PATH: "debian/x86_test-gl"
-   DEBIAN_X86_TEST_GL_TAG: "2022-01-18-kernel"
-   DEBIAN_X86_TEST_VK_TAG: "2022-01-02-deqp-runner"
-
-   FEDORA_X86_BUILD_TAG: "2021-12-31-refactor"
-   KERNEL_ROOTFS_TAG: "2022-01-18-kernel"
-
-   WINDOWS_X64_BUILD_PATH: "windows/x64_build"
-   WINDOWS_X64_BUILD_TAG: "2022-20-02-base_split"
-
-   WINDOWS_X64_TEST_PATH: "windows/x64_test"
-   WINDOWS_X64_TEST_TAG: "2022-20-02-base_split"

.gitlab-ci/lava/lava-gitlab-ci.yml

@@ -1,120 +0,0 @@
-.lava-test:
-  extends:
-    - .ci-run-policy
-  # Cancel job if a newer commit is pushed to the same branch
-  interruptible: true
-  variables:
-    GIT_STRATEGY: none # testing doesn't build anything from source
-    FDO_CI_CONCURRENT: 6 # should be replaced by per-machine definitions
-    DEQP_VER: gles2
-    # proxy used to cache data locally
-    FDO_HTTP_CACHE_URI: "http://caching-proxy/cache/?uri="
-    # base system generated by the container build job, shared between many pipelines
-    BASE_SYSTEM_HOST_PREFIX: "${MINIO_HOST}/mesa-lava"
-    BASE_SYSTEM_MAINLINE_HOST_PATH: "${BASE_SYSTEM_HOST_PREFIX}/${FDO_UPSTREAM_REPO}/${DISTRIBUTION_TAG}/${ARCH}"
-    BASE_SYSTEM_FORK_HOST_PATH: "${BASE_SYSTEM_HOST_PREFIX}/${CI_PROJECT_PATH}/${DISTRIBUTION_TAG}/${ARCH}"
-    # per-job build artifacts
-    MESA_BUILD_PATH: "${PIPELINE_ARTIFACTS_BASE}/mesa-${ARCH}.tar.gz"
-    JOB_ROOTFS_OVERLAY_PATH: "${JOB_ARTIFACTS_BASE}/job-rootfs-overlay.tar.gz"
-    JOB_RESULTS_PATH: "${JOB_ARTIFACTS_BASE}/results.tar.gz"
-    PIGLIT_NO_WINDOW: 1
-    VISIBILITY_GROUP: "Collabora+fdo"
-  script:
-    - ./artifacts/lava/lava-submit.sh
-  artifacts:
-    name: "mesa_${CI_JOB_NAME}"
-    when: always
-    paths:
-      - results/
-    exclude:
-      - results/*.shader_cache
-  after_script:
-    - wget -q "https://${JOB_RESULTS_PATH}" -O- | tar -xz
-
-.lava-test:armhf:
-  variables:
-    ARCH: armhf
-    KERNEL_IMAGE_NAME: zImage
-    KERNEL_IMAGE_TYPE: "zimage"
-    BOOT_METHOD: u-boot
-    HWCI_TEST_SCRIPT: "/install/deqp-runner.sh"
-  extends:
-    - .use-debian/arm_build # for same $MESA_ARTIFACTS_TAG as in kernel+rootfs_armhf
-    - .use-debian/x86_build
-    - .lava-test
-    - .use-kernel+rootfs-arm
-  needs:
-    - kernel+rootfs_armhf
-    - debian/x86_build
-    - debian-armhf
-
-.lava-test:arm64:
-  variables:
-    ARCH: arm64
-    KERNEL_IMAGE_NAME: Image
-    KERNEL_IMAGE_TYPE: "image"
-    BOOT_METHOD: u-boot
-    HWCI_TEST_SCRIPT: "/install/deqp-runner.sh"
-  extends:
-    - .use-debian/arm_build # for same $MESA_ARTIFACTS_TAG as in kernel+rootfs_arm64
-    - .use-debian/x86_build
-    - .lava-test
-    - .use-kernel+rootfs-arm
-  dependencies:
-    - debian-arm64
-  needs:
-    - kernel+rootfs_arm64
-    - debian/x86_build
-    - debian-arm64
-
-.lava-test:amd64:
-  variables:
-    ARCH: amd64
-    KERNEL_IMAGE_NAME: bzImage
-    KERNEL_IMAGE_TYPE: "zimage"
-    BOOT_METHOD: u-boot
-    HWCI_TEST_SCRIPT: "/install/deqp-runner.sh"
-  extends:
-    - .use-debian/x86_build-base # for same $MESA_ARTIFACTS_BASE_TAG as in kernel+rootfs_amd64
-    - .use-debian/x86_build
-    - .lava-test
-    - .use-kernel+rootfs-amd64
-  needs:
-    - kernel+rootfs_amd64
-    - debian-testing
-
-.lava-traces-base:
-  variables:
-    HWCI_TEST_SCRIPT: "/install/piglit/piglit-traces.sh"
-  artifacts:
-    reports:
-      junit: results/junit.xml
-
-.lava-piglit:
-  variables:
-    PIGLIT_REPLAY_DEVICE_NAME: "gl-${GPU_VERSION}"
-    PIGLIT_RESULTS: "${GPU_VERSION}-${PIGLIT_PROFILES}"
-    HWCI_TEST_SCRIPT: "/install/piglit/piglit-runner.sh"
-
-.lava-piglit-traces:amd64:
-  extends:
-    - .lava-test:amd64
-    - .lava-piglit
-    - .lava-traces-base
-
-.lava-piglit-traces:armhf:
-  extends:
-    - .lava-test:armhf
-    - .lava-piglit
-    - .lava-traces-base
-
-.lava-piglit-traces:arm64:
-  extends:
-    - .lava-test:arm64
-    - .lava-piglit
-    - .lava-traces-base
-
-.lava-piglit:amd64:
-  extends:
-    - .lava-test:amd64
-    - .lava-piglit

.gitlab-ci/lava/lava-submit.sh

@@ -1,44 +0,0 @@
-#!/bin/bash
-
-set -e
-set -x
-
-# Try to use the kernel and rootfs built in mainline first, so we're more
-# likely to hit cache
-if wget -q --method=HEAD "https://${BASE_SYSTEM_MAINLINE_HOST_PATH}/done"; then
-	BASE_SYSTEM_HOST_PATH="${BASE_SYSTEM_MAINLINE_HOST_PATH}"
-else
-	BASE_SYSTEM_HOST_PATH="${BASE_SYSTEM_FORK_HOST_PATH}"
-fi
-
-rm -rf results
-mkdir -p results/job-rootfs-overlay/
-
-cp artifacts/ci-common/capture-devcoredump.sh results/job-rootfs-overlay/
-cp artifacts/ci-common/init-*.sh results/job-rootfs-overlay/
-artifacts/ci-common/generate-env.sh > results/job-rootfs-overlay/set-job-env-vars.sh
-
-tar zcf job-rootfs-overlay.tar.gz -C results/job-rootfs-overlay/ .
-ci-fairy minio login --token-file "${CI_JOB_JWT_FILE}"
-ci-fairy minio cp job-rootfs-overlay.tar.gz "minio://${JOB_ROOTFS_OVERLAY_PATH}"
-
-touch results/lava.log
-tail -f results/lava.log &
-artifacts/lava/lava_job_submitter.py \
-	--dump-yaml \
-	--pipeline-info "$CI_JOB_NAME: $CI_PIPELINE_URL on $CI_COMMIT_REF_NAME ${CI_NODE_INDEX}/${CI_NODE_TOTAL}" \
-	--base-system-url-prefix "https://${BASE_SYSTEM_HOST_PATH}" \
-	--mesa-build-url "${FDO_HTTP_CACHE_URI:-}https://${MESA_BUILD_PATH}" \
-	--job-rootfs-overlay-url "${FDO_HTTP_CACHE_URI:-}https://${JOB_ROOTFS_OVERLAY_PATH}" \
-	--job-artifacts-base ${JOB_ARTIFACTS_BASE} \
-	--job-timeout ${JOB_TIMEOUT:-30} \
-	--first-stage-init artifacts/ci-common/init-stage1.sh \
-	--ci-project-dir ${CI_PROJECT_DIR} \
-	--device-type ${DEVICE_TYPE} \
-	--dtb ${DTB} \
-	--jwt-file "${CI_JOB_JWT_FILE}" \
-	--kernel-image-name ${KERNEL_IMAGE_NAME} \
-	--kernel-image-type "${KERNEL_IMAGE_TYPE}" \
-	--boot-method ${BOOT_METHOD} \
-	--visibility-group ${VISIBILITY_GROUP} \
-	--lava-tags "${LAVA_TAGS}" >> results/lava.log

.gitlab-ci/lava/lava_job_submitter.py

@@ -1,373 +0,0 @@
-#!/usr/bin/env python3
-#
-# Copyright (C) 2020, 2021 Collabora Limited
-# Author: Gustavo Padovan <gustavo.padovan@collabora.com>
-#
-# Permission is hereby granted, free of charge, to any person obtaining a
-# copy of this software and associated documentation files (the "Software"),
-# to deal in the Software without restriction, including without limitation
-# the rights to use, copy, modify, merge, publish, distribute, sublicense,
-# and/or sell copies of the Software, and to permit persons to whom the
-# Software is furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice (including the next
-# paragraph) shall be included in all copies or substantial portions of the
-# Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
-# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-# SOFTWARE.
-
-"""Send a job to LAVA, track it and collect log back"""
-
-import argparse
-import pathlib
-import sys
-import time
-import traceback
-import urllib.parse
-import xmlrpc
-from datetime import datetime, timedelta
-
-import lavacli
-import yaml
-from lavacli.utils import loader
-
-# Timeout in minutes to decide if the device from the dispatched LAVA job has
-# hung or not due to the lack of new log output.
-DEVICE_HANGING_TIMEOUT_MIN = 5
-
-# How many seconds the script should wait before try a new polling iteration to
-# check if the dispatched LAVA job is running or waiting in the job queue.
-WAIT_FOR_DEVICE_POLLING_TIME_SEC = 10
-
-# How many seconds to wait between log output LAVA RPC calls.
-LOG_POLLING_TIME_SEC = 5
-
-# How many retries should be made when a timeout happen.
-NUMBER_OF_RETRIES_TIMEOUT_DETECTION = 2
-
-
-def print_log(msg):
-    print("{}: {}".format(datetime.now(), msg))
-
-def fatal_err(msg):
-    print_log(msg)
-    sys.exit(1)
-
-
-def hide_sensitive_data(yaml_data, hide_tag="HIDEME"):
-    out_data = ""
-
-    for line in yaml_data.splitlines(True):
-        if hide_tag in line:
-            continue
-        out_data += line
-
-    return out_data
-
-
-def generate_lava_yaml(args):
-    # General metadata and permissions, plus also inexplicably kernel arguments
-    values = {
-        'job_name': 'mesa: {}'.format(args.pipeline_info),
-        'device_type': args.device_type,
-        'visibility': { 'group': [ args.visibility_group ] },
-        'priority': 75,
-        'context': {
-            'extra_nfsroot_args': ' init=/init rootwait minio_results={}'.format(args.job_artifacts_base)
-        },
-        'timeouts': {
-            'job': {
-                'minutes': args.job_timeout
-            }
-        },
-    }
-
-    if args.lava_tags:
-        values['tags'] = args.lava_tags.split(',')
-
-    # URLs to our kernel rootfs to boot from, both generated by the base
-    # container build
-    deploy = {
-      'timeout': { 'minutes': 10 },
-      'to': 'tftp',
-      'os': 'oe',
-      'kernel': {
-        'url': '{}/{}'.format(args.base_system_url_prefix, args.kernel_image_name),
-      },
-      'nfsrootfs': {
-        'url': '{}/lava-rootfs.tgz'.format(args.base_system_url_prefix),
-        'compression': 'gz',
-      }
-    }
-    if args.kernel_image_type:
-        deploy['kernel']['type'] = args.kernel_image_type
-    if args.dtb:
-        deploy['dtb'] = {
-          'url': '{}/{}.dtb'.format(args.base_system_url_prefix, args.dtb)
-        }
-
-    # always boot over NFS
-    boot = {
-      'timeout': { 'minutes': 25 },
-      'method': args.boot_method,
-      'commands': 'nfs',
-      'prompts': ['lava-shell:'],
-    }
-
-    # skeleton test definition: only declaring each job as a single 'test'
-    # since LAVA's test parsing is not useful to us
-    test = {
-      'timeout': { 'minutes': args.job_timeout },
-      'failure_retry': 1,
-      'definitions': [ {
-        'name': 'mesa',
-        'from': 'inline',
-        'path': 'inline/mesa.yaml',
-        'repository': {
-          'metadata': {
-            'name': 'mesa',
-            'description': 'Mesa test plan',
-            'os': [ 'oe' ],
-            'scope': [ 'functional' ],
-            'format': 'Lava-Test Test Definition 1.0',
-          },
-          'parse': {
-            'pattern': r'hwci: (?P<test_case_id>\S*):\s+(?P<result>(pass|fail))'
-          },
-          'run': {
-          },
-        },
-      } ],
-    }
-
-    # job execution script:
-    #   - inline .gitlab-ci/common/init-stage1.sh
-    #   - fetch and unpack per-pipeline build artifacts from build job
-    #   - fetch and unpack per-job environment from lava-submit.sh
-    #   - exec .gitlab-ci/common/init-stage2.sh 
-    init_lines = []
-
-    with open(args.first_stage_init, 'r') as init_sh:
-      init_lines += [ x.rstrip() for x in init_sh if not x.startswith('#') and x.rstrip() ]
-
-    with open(args.jwt_file) as jwt_file:
-        init_lines += [
-            "set +x",
-            f'echo -n "{jwt_file.read()}" > "{args.jwt_file}"  # HIDEME',
-            "set -x",
-        ]
-
-    init_lines += [
-      'mkdir -p {}'.format(args.ci_project_dir),
-      'wget -S --progress=dot:giga -O- {} | tar -xz -C {}'.format(args.mesa_build_url, args.ci_project_dir),
-      'wget -S --progress=dot:giga -O- {} | tar -xz -C /'.format(args.job_rootfs_overlay_url),
-      f'echo "export CI_JOB_JWT_FILE={args.jwt_file}" >> /set-job-env-vars.sh',
-      'exec /init-stage2.sh',
-    ]
-    test['definitions'][0]['repository']['run']['steps'] = init_lines
-
-    values['actions'] = [
-      { 'deploy': deploy },
-      { 'boot': boot },
-      { 'test': test },
-    ]
-
-    return yaml.dump(values, width=10000000)
-
-
-def setup_lava_proxy():
-    config = lavacli.load_config("default")
-    uri, usr, tok = (config.get(key) for key in ("uri", "username", "token"))
-    uri_obj = urllib.parse.urlparse(uri)
-    uri_str = "{}://{}:{}@{}{}".format(uri_obj.scheme, usr, tok, uri_obj.netloc, uri_obj.path)
-    transport = lavacli.RequestsTransport(
-        uri_obj.scheme,
-        config.get("proxy"),
-        config.get("timeout", 120.0),
-        config.get("verify_ssl_cert", True),
-    )
-    proxy = xmlrpc.client.ServerProxy(
-        uri_str, allow_none=True, transport=transport)
-
-    print_log("Proxy for {} created.".format(config['uri']))
-
-    return proxy
-
-
-def _call_proxy(fn, *args):
-    retries = 60
-    for n in range(1, retries + 1):
-        try:
-            return fn(*args)
-        except xmlrpc.client.ProtocolError as err:
-            if n == retries:
-                traceback.print_exc()
-                fatal_err("A protocol error occurred (Err {} {})".format(err.errcode, err.errmsg))
-            else:
-                time.sleep(15)
-                pass
-        except xmlrpc.client.Fault as err:
-            traceback.print_exc()
-            fatal_err("FATAL: Fault: {} (code: {})".format(err.faultString, err.faultCode))
-
-
-def get_job_results(proxy, job_id, test_suite, test_case):
-    # Look for infrastructure errors and retry if we see them.
-    results_yaml = _call_proxy(proxy.results.get_testjob_results_yaml, job_id)
-    results = yaml.load(results_yaml, Loader=loader(False))
-    for res in results:
-        metadata = res['metadata']
-        if not 'result' in metadata or metadata['result'] != 'fail':
-            continue
-        if 'error_type' in metadata and metadata['error_type'] == "Infrastructure":
-            print_log("LAVA job {} failed with Infrastructure Error. Retry.".format(job_id))
-            return False
-        if 'case' in metadata and metadata['case'] == "validate":
-            print_log("LAVA job {} failed validation (possible download error). Retry.".format(job_id))
-            return False
-
-    results_yaml = _call_proxy(proxy.results.get_testcase_results_yaml, job_id, test_suite, test_case)
-    results = yaml.load(results_yaml, Loader=loader(False))
-    if not results:
-        fatal_err("LAVA: no result for test_suite '{}', test_case '{}'".format(test_suite, test_case))
-
-    print_log("LAVA: result for test_suite '{}', test_case '{}': {}".format(test_suite, test_case, results[0]['result']))
-    if results[0]['result'] != 'pass':
-        fatal_err("FAIL")
-
-    return True
-
-def wait_until_job_is_started(proxy, job_id):
-    print_log(f"Waiting for job {job_id} to start.")
-    current_state = "Submitted"
-    waiting_states = ["Submitted", "Scheduling", "Scheduled"]
-    while current_state in waiting_states:
-        job_state = _call_proxy(proxy.scheduler.job_state, job_id)
-        current_state = job_state["job_state"]
-
-        time.sleep(WAIT_FOR_DEVICE_POLLING_TIME_SEC)
-    print_log(f"Job {job_id} started.")
-
-def follow_job_execution(proxy, job_id):
-    line_count = 0
-    finished = False
-    last_time_logs = datetime.now()
-    while not finished:
-        (finished, data) = _call_proxy(proxy.scheduler.jobs.logs, job_id, line_count)
-        logs = yaml.load(str(data), Loader=loader(False))
-        if logs:
-            # Reset the timeout
-            last_time_logs = datetime.now()
-            for line in logs:
-                print("{} {}".format(line["dt"], line["msg"]))
-
-            line_count += len(logs)
-
-        else:
-            time_limit = timedelta(minutes=DEVICE_HANGING_TIMEOUT_MIN)
-            if datetime.now() - last_time_logs > time_limit:
-                print_log("LAVA job {} doesn't advance (machine got hung?). Retry.".format(job_id))
-                return False
-
-        # `proxy.scheduler.jobs.logs` does not block, even when there is no
-        # new log to be fetched. To avoid dosing the LAVA dispatcher
-        # machine, let's add a sleep to save them some stamina.
-        time.sleep(LOG_POLLING_TIME_SEC)
-
-    return True
-
-def show_job_data(proxy, job_id):
-    show = _call_proxy(proxy.scheduler.jobs.show, job_id)
-    for field, value in show.items():
-        print("{}\t: {}".format(field, value))
-
-
-def validate_job(proxy, job_file):
-    try:
-        return _call_proxy(proxy.scheduler.jobs.validate, job_file, True)
-    except:
-        return False
-
-def submit_job(proxy, job_file):
-    return _call_proxy(proxy.scheduler.jobs.submit, job_file)
-
-
-def main(args):
-    proxy = setup_lava_proxy()
-
-    yaml_file = generate_lava_yaml(args)
-
-    if args.dump_yaml:
-        print(hide_sensitive_data(generate_lava_yaml(args)))
-
-    if args.validate_only:
-        ret = validate_job(proxy, yaml_file)
-        if not ret:
-            fatal_err("Error in LAVA job definition")
-        print("LAVA job definition validated successfully")
-        return
-
-    retry_count = NUMBER_OF_RETRIES_TIMEOUT_DETECTION
-
-    while retry_count >= 0:
-        job_id = submit_job(proxy, yaml_file)
-
-        print_log("LAVA job id: {}".format(job_id))
-
-        wait_until_job_is_started(proxy, job_id)
-
-        if not follow_job_execution(proxy, job_id):
-            print_log(f"Job {job_id} has timed out. Cancelling it.")
-            # Cancel the job as it is considered unreachable by Mesa CI.
-            proxy.scheduler.jobs.cancel(job_id)
-
-            retry_count -= 1
-            continue
-
-        show_job_data(proxy, job_id)
-
-        if get_job_results(proxy,  job_id, "0_mesa", "mesa") == True:
-             break
-
-def create_parser():
-    parser = argparse.ArgumentParser("LAVA job submitter")
-
-    parser.add_argument("--pipeline-info")
-    parser.add_argument("--base-system-url-prefix")
-    parser.add_argument("--mesa-build-url")
-    parser.add_argument("--job-rootfs-overlay-url")
-    parser.add_argument("--job-artifacts-base")
-    parser.add_argument("--job-timeout", type=int)
-    parser.add_argument("--first-stage-init")
-    parser.add_argument("--ci-project-dir")
-    parser.add_argument("--device-type")
-    parser.add_argument("--dtb", nargs='?', default="")
-    parser.add_argument("--kernel-image-name")
-    parser.add_argument("--kernel-image-type", nargs='?', default="")
-    parser.add_argument("--boot-method")
-    parser.add_argument("--lava-tags", nargs='?', default="")
-    parser.add_argument("--jwt-file", type=pathlib.Path)
-    parser.add_argument("--validate-only", action='store_true')
-    parser.add_argument("--dump-yaml", action='store_true')
-    parser.add_argument("--visibility-group")
-
-    return parser
-
-if __name__ == "__main__":
-    # given that we proxy from DUT -> LAVA dispatcher -> LAVA primary -> us ->
-    # GitLab runner -> GitLab primary -> user, safe to say we don't need any
-    # more buffering
-    sys.stdout.reconfigure(line_buffering=True)
-    sys.stderr.reconfigure(line_buffering=True)
-
-    parser = create_parser()
-
-    parser.set_defaults(func=main)
-    args = parser.parse_args()
-    args.func(args)

.gitlab-ci/meson/build.sh

@@ -1,81 +0,0 @@
-#!/bin/bash
-
-set -e
-set -o xtrace
-
-CROSS_FILE=/cross_file-"$CROSS".txt
-
-# We need to control the version of llvm-config we're using, so we'll
-# tweak the cross file or generate a native file to do so.
-if test -n "$LLVM_VERSION"; then
-    LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
-    echo -e "[binaries]\nllvm-config = '`which $LLVM_CONFIG`'" > native.file
-    if [ -n "$CROSS" ]; then
-        sed -i -e '/\[binaries\]/a\' -e "llvm-config = '`which $LLVM_CONFIG`'" $CROSS_FILE
-    fi
-    $LLVM_CONFIG --version
-else
-    rm -f native.file
-    touch native.file
-fi
-
-# cross-xfail-$CROSS, if it exists, contains a list of tests that are expected
-# to fail for the $CROSS configuration, one per line. you can then mark those
-# tests in their meson.build with:
-#
-# test(...,
-#      should_fail: meson.get_cross_property('xfail', '').contains(t),
-#     )
-#
-# where t is the name of the test, and the '' is the string to search when
-# not cross-compiling (which is empty, because for amd64 everything is
-# expected to pass).
-if [ -n "$CROSS" ]; then
-    CROSS_XFAIL=.gitlab-ci/cross-xfail-"$CROSS"
-    if [ -s "$CROSS_XFAIL" ]; then
-        sed -i \
-            -e '/\[properties\]/a\' \
-            -e "xfail = '$(tr '\n' , < $CROSS_XFAIL)'" \
-            "$CROSS_FILE"
-    fi
-fi
-
-# Only use GNU time if available, not any shell built-in command
-case $CI_JOB_NAME in
-    # strace and wine don't seem to mix well
-    # ASAN leak detection is incompatible with strace
-    debian-mingw32-x86_64|*-asan*)
-        if test -f /usr/bin/time; then
-            MESON_TEST_ARGS+=--wrapper=$PWD/.gitlab-ci/meson/time.sh
-        fi
-        ;;
-    *)
-        if test -f /usr/bin/time -a -f /usr/bin/strace; then
-            MESON_TEST_ARGS+=--wrapper=$PWD/.gitlab-ci/meson/time-strace.sh
-        fi
-        ;;
-esac
-
-rm -rf _build
-meson _build --native-file=native.file \
-      --wrap-mode=nofallback \
-      ${CROSS+--cross "$CROSS_FILE"} \
-      -D prefix=`pwd`/install \
-      -D libdir=lib \
-      -D buildtype=${BUILDTYPE:-debug} \
-      -D build-tests=true \
-      -D c_args="$(echo -n $C_ARGS)" \
-      -D cpp_args="$(echo -n $CPP_ARGS)" \
-      -D libunwind=${UNWIND} \
-      ${DRI_LOADERS} \
-      ${GALLIUM_ST} \
-      -D gallium-drivers=${GALLIUM_DRIVERS:-[]} \
-      -D vulkan-drivers=${VULKAN_DRIVERS:-[]} \
-      -D werror=true \
-      ${EXTRA_OPTION}
-cd _build
-meson configure
-ninja
-LC_ALL=C.UTF-8 meson test --num-processes ${FDO_CI_CONCURRENT:-4} ${MESON_TEST_ARGS}
-ninja install
-cd ..

.gitlab-ci/meson/time-strace.sh

@@ -1,27 +0,0 @@
-#!/bin/sh
-
-STRACEDIR=meson-logs/strace/$(for i in $@; do basename -z -- $i; echo -n _; done)
-
-mkdir -p $STRACEDIR
-
-# If the test times out, meson sends SIGTERM to this process.
-# Simply exec'ing "time" would result in no output from that in this case.
-# Instead, we need to run "time" in the background, catch the signals and
-# propagate them to the actual test process.
-
-/usr/bin/time -v strace -ff -tt -T -o $STRACEDIR/log "$@" &
-TIMEPID=$!
-STRACEPID=$(ps --ppid $TIMEPID -o pid=)
-TESTPID=$(ps --ppid $STRACEPID -o pid=)
-
-if test "x$TESTPID" != x; then
-    trap 'kill -TERM $TESTPID; wait $TIMEPID; exit $?' TERM
-fi
-
-wait $TIMEPID
-EXITCODE=$?
-
-# Only keep strace logs if the test timed out
-rm -rf $STRACEDIR &
-
-exit $EXITCODE

.gitlab-ci/meson/time.sh

@@ -1,17 +0,0 @@
-#!/bin/sh
-
-# If the test times out, meson sends SIGTERM to this process.
-# Simply exec'ing "time" would result in no output from that in this case.
-# Instead, we need to run "time" in the background, catch the signals and
-# propagate them to the actual test process.
-
-/usr/bin/time -v "$@" &
-TIMEPID=$!
-TESTPID=$(ps --ppid $TIMEPID -o pid=)
-
-if test "x$TESTPID" != x; then
-    trap 'kill -TERM $TESTPID; wait $TIMEPID; exit $?' TERM
-fi
-
-wait $TIMEPID
-exit $?

.gitlab-ci/piglit/disable-vs_in.diff

@@ -1,36 +0,0 @@
-diff --git a/generated_tests/CMakeLists.txt b/generated_tests/CMakeLists.txt
-index 738526546..6f89048cd 100644
---- a/generated_tests/CMakeLists.txt
-+++ b/generated_tests/CMakeLists.txt
-@@ -206,11 +206,6 @@ piglit_make_generated_tests(
-	templates/gen_variable_index_write_tests/vs.shader_test.mako
-	templates/gen_variable_index_write_tests/fs.shader_test.mako
-	templates/gen_variable_index_write_tests/helpers.mako)
--piglit_make_generated_tests(
--	vs_in_fp64.list
--	gen_vs_in_fp64.py
--	templates/gen_vs_in_fp64/columns.shader_test.mako
--	templates/gen_vs_in_fp64/regular.shader_test.mako)
- piglit_make_generated_tests(
-	shader_framebuffer_fetch_tests.list
-	gen_shader_framebuffer_fetch_tests.py)
-@@ -279,7 +274,6 @@ add_custom_target(gen-gl-tests
-			gen_extensions_defined.list
-			vp-tex.list
-			variable_index_write_tests.list
--			vs_in_fp64.list
-			gpu_shader4_tests.list
- )
-
-diff --git a/tests/sanity.py b/tests/sanity.py
-index 12f1614c9..9019087e2 100644
---- a/tests/sanity.py
-+++ b/tests/sanity.py
-@@ -100,7 +100,6 @@ shader_tests = (
-     'spec/arb_tessellation_shader/execution/barrier-patch.shader_test',
-     'spec/arb_tessellation_shader/execution/built-in-functions/tcs-any-bvec4-using-if.shader_test',
-     'spec/arb_tessellation_shader/execution/sanity.shader_test',
--    'spec/arb_vertex_attrib_64bit/execution/vs_in/vs-input-uint_uvec4-double_dmat3x4_array2-position.shader_test',
-     'spec/glsl-1.50/execution/geometry-basic.shader_test',
-     'spec/oes_viewport_array/viewport-gs-write-simple.shader_test',
- )

.gitlab-ci/piglit/piglit-runner.sh

@@ -1,108 +0,0 @@
-#!/bin/sh
-
-set -ex
-
-if [ -z "$GPU_VERSION" ]; then
-   echo 'GPU_VERSION must be set to something like "llvmpipe" or "freedreno-a630" (the name used in your ci/gpu-version-*.txt)'
-   exit 1
-fi
-
-INSTALL=`pwd`/install
-
-# Set up the driver environment.
-export LD_LIBRARY_PATH=`pwd`/install/lib/
-export EGL_PLATFORM=surfaceless
-export VK_ICD_FILENAMES=`pwd`/install/share/vulkan/icd.d/"$VK_DRIVER"_icd.${VK_CPU:-`uname -m`}.json
-
-RESULTS=`pwd`/${PIGLIT_RESULTS_DIR:-results}
-mkdir -p $RESULTS
-
-if [ "$GALLIUM_DRIVER" = "virpipe" ]; then
-    # deqp is to use virpipe, and virgl_test_server llvmpipe
-    export GALLIUM_DRIVER="$GALLIUM_DRIVER"
-
-    VTEST_ARGS="--use-egl-surfaceless"
-    if [ "$VIRGL_HOST_API" = "GLES" ]; then
-        VTEST_ARGS="$VTEST_ARGS --use-gles"
-    fi
-
-    GALLIUM_DRIVER=llvmpipe \
-    GALLIVM_PERF="nopt" \
-    virgl_test_server $VTEST_ARGS >$RESULTS/vtest-log.txt 2>&1 &
-
-    sleep 1
-fi
-
-if [ -n "$PIGLIT_FRACTION" -o -n "$CI_NODE_INDEX" ]; then
-   FRACTION=`expr ${PIGLIT_FRACTION:-1} \* ${CI_NODE_TOTAL:-1}`
-PIGLIT_RUNNER_OPTIONS="$PIGLIT_RUNNER_OPTIONS --fraction $FRACTION"
-fi
-
-# If the job is parallel at the gitab job level, take the corresponding fraction
-# of the caselist.
-if [ -n "$CI_NODE_INDEX" ]; then
-   PIGLIT_RUNNER_OPTIONS="$PIGLIT_RUNNER_OPTIONS --fraction-start ${CI_NODE_INDEX}"
-fi
-
-if [ -e "$INSTALL/$GPU_VERSION-fails.txt" ]; then
-    PIGLIT_RUNNER_OPTIONS="$PIGLIT_RUNNER_OPTIONS --baseline $INSTALL/$GPU_VERSION-fails.txt"
-fi
-
-# Default to an empty known flakes file if it doesn't exist.
-touch $INSTALL/$GPU_VERSION-flakes.txt
-
-if [ -n "$VK_DRIVER" ] && [ -e "$INSTALL/$VK_DRIVER-skips.txt" ]; then
-    PIGLIT_SKIPS="$PIGLIT_SKIPS $INSTALL/$VK_DRIVER-skips.txt"
-fi
-
-if [ -n "$GALLIUM_DRIVER" ] && [ -e "$INSTALL/$GALLIUM_DRIVER-skips.txt" ]; then
-    PIGLIT_SKIPS="$PIGLIT_SKIPS $INSTALL/$GALLIUM_DRIVER-skips.txt"
-fi
-
-if [ -n "$DRIVER_NAME" ] && [ -e "$INSTALL/$DRIVER_NAME-skips.txt" ]; then
-    PIGLIT_SKIPS="$PIGLIT_SKIPS $INSTALL/$DRIVER_NAME-skips.txt"
-fi
-
-if [ -e "$INSTALL/$GPU_VERSION-skips.txt" ]; then
-    PIGLIT_SKIPS="$PIGLIT_SKIPS $INSTALL/$GPU_VERSION-skips.txt"
-fi
-
-set +e
-
-piglit-runner \
-    run \
-    --piglit-folder /piglit \
-    --output $RESULTS \
-    --jobs ${FDO_CI_CONCURRENT:-4} \
-    --skips $INSTALL/all-skips.txt $PIGLIT_SKIPS \
-    --flakes $INSTALL/$GPU_VERSION-flakes.txt \
-    --profile $PIGLIT_PROFILES \
-    --process-isolation \
-    $PIGLIT_RUNNER_OPTIONS \
-    -v -v
-
-PIGLIT_EXITCODE=$?
-
-deqp-runner junit \
-   --testsuite $PIGLIT_PROFILES \
-   --results $RESULTS/failures.csv \
-   --output $RESULTS/junit.xml \
-   --limit 50 \
-   --template "See https://$CI_PROJECT_ROOT_NAMESPACE.pages.freedesktop.org/-/$CI_PROJECT_NAME/-/jobs/$CI_JOB_ID/artifacts/results/{{testcase}}.xml"
-
-# Report the flakes to the IRC channel for monitoring (if configured):
-if [ -n "$FLAKES_CHANNEL" ]; then
-  python3 $INSTALL/report-flakes.py \
-         --host irc.oftc.net \
-         --port 6667 \
-         --results $RESULTS/results.csv \
-         --known-flakes $INSTALL/$GPU_VERSION-flakes.txt \
-         --channel "$FLAKES_CHANNEL" \
-         --runner "$CI_RUNNER_DESCRIPTION" \
-         --job "$CI_JOB_ID" \
-         --url "$CI_JOB_URL" \
-         --branch "${CI_MERGE_REQUEST_SOURCE_BRANCH_NAME:-$CI_COMMIT_BRANCH}" \
-         --branch-title "${CI_MERGE_REQUEST_TITLE:-$CI_COMMIT_TITLE}"
-fi
-
-exit $PIGLIT_EXITCODE

.gitlab-ci/piglit/piglit-traces.sh

@@ -1,234 +0,0 @@
-#!/bin/sh
-
-set -ex
-
-INSTALL=$(realpath -s "$PWD"/install)
-MINIO_ARGS="--credentials=/tmp/.minio_credentials"
-
-RESULTS=$(realpath -s "$PWD"/results)
-mkdir -p "$RESULTS"
-
-# Set up the driver environment.
-# Modifiying here directly LD_LIBRARY_PATH may cause problems when
-# using a command wrapper. Hence, we will just set it when running the
-# command.
-export __LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$INSTALL/lib/"
-
-# Sanity check to ensure that our environment is sufficient to make our tests
-# run against the Mesa built by CI, rather than any installed distro version.
-MESA_VERSION=$(head -1 "$INSTALL/VERSION" | sed 's/\./\\./g')
-
-print_red() {
-    RED='\033[0;31m'
-    NC='\033[0m' # No Color
-    printf "${RED}"
-    "$@"
-    printf "${NC}"
-}
-
-# wrapper to supress +x to avoid spamming the log
-quiet() {
-    set +x
-    "$@"
-    set -x
-}
-
-if [ "$VK_DRIVER" ]; then
-
-    ### VULKAN ###
-
-    # Set the Vulkan driver to use.
-    export VK_ICD_FILENAMES="$INSTALL/share/vulkan/icd.d/${VK_DRIVER}_icd.x86_64.json"
-
-    # Set environment for Wine.
-    export WINEDEBUG="-all"
-    export WINEPREFIX="/dxvk-wine64"
-    export WINEESYNC=1
-
-    # Set environment for DXVK.
-    export DXVK_LOG_LEVEL="none"
-    export DXVK_STATE_CACHE=0
-
-    # Set environment for gfxreconstruct executables.
-    export PATH="/gfxreconstruct/build/bin:$PATH"
-
-    SANITY_MESA_VERSION_CMD="vulkaninfo"
-
-    HANG_DETECTION_CMD="/parallel-deqp-runner/build/bin/hang-detection"
-
-
-    # Set up the Window System Interface (WSI)
-
-    if [ ${TEST_START_XORG:-0} -eq 1 ]; then
-        "$INSTALL"/common/start-x.sh "$INSTALL"
-        export DISPLAY=:0
-    else
-        # Run vulkan against the host's running X server (xvfb doesn't
-        # have DRI3 support).
-        # Set the DISPLAY env variable in each gitlab-runner's
-        # configuration file:
-        # https://docs.gitlab.com/runner/configuration/advanced-configuration.html#the-runners-section
-        quiet printf "%s%s\n" "Running against the hosts' X server. " \
-              "DISPLAY is \"$DISPLAY\"."
-    fi
-else
-
-    ### GL/ES ###
-
-    # Set environment for apitrace executable.
-    export PATH="/apitrace/build:$PATH"
-
-    # Our rootfs may not have "less", which apitrace uses during
-    # apitrace dump
-    export PAGER=cat
-
-    SANITY_MESA_VERSION_CMD="wflinfo"
-
-    HANG_DETECTION_CMD=""
-
-
-    # Set up the platform windowing system.
-
-    if [ "x$EGL_PLATFORM" = "xsurfaceless" ]; then
-
-        # Use the surfaceless EGL platform.
-        export DISPLAY=
-        export WAFFLE_PLATFORM="surfaceless_egl"
-
-        SANITY_MESA_VERSION_CMD="$SANITY_MESA_VERSION_CMD --platform surfaceless_egl --api gles2"
-
-        if [ "x$GALLIUM_DRIVER" = "xvirpipe" ]; then
-            # piglit is to use virpipe, and virgl_test_server llvmpipe
-            export GALLIUM_DRIVER="$GALLIUM_DRIVER"
-
-            LD_LIBRARY_PATH="$__LD_LIBRARY_PATH" \
-            GALLIUM_DRIVER=llvmpipe \
-            VTEST_USE_EGL_SURFACELESS=1 \
-            VTEST_USE_GLES=1 \
-            virgl_test_server >"$RESULTS"/vtest-log.txt 2>&1 &
-
-            sleep 1
-        fi
-    elif [ "x$PIGLIT_PLATFORM" = "xgbm" ]; then
-        SANITY_MESA_VERSION_CMD="$SANITY_MESA_VERSION_CMD --platform gbm --api gl"
-    elif [ "x$PIGLIT_PLATFORM" = "xmixed_glx_egl" ]; then
-        # It is assumed that you have already brought up your X server before
-        # calling this script.
-        SANITY_MESA_VERSION_CMD="$SANITY_MESA_VERSION_CMD --platform glx --api gl"
-    else
-        SANITY_MESA_VERSION_CMD="$SANITY_MESA_VERSION_CMD --platform glx --api gl --profile core"
-        RUN_CMD_WRAPPER="xvfb-run --server-args=\"-noreset\" sh -c"
-    fi
-fi
-
-if [ "$ZINK_USE_LAVAPIPE" ]; then
-    export VK_ICD_FILENAMES="$INSTALL/share/vulkan/icd.d/lvp_icd.x86_64.json"
-fi
-
-# If the job is parallel at the  gitlab job level, will take the corresponding
-# fraction of the caselist.
-if [ -n "$CI_NODE_INDEX" ]; then
-    USE_CASELIST=1
-fi
-
-replay_minio_upload_images() {
-    find "$RESULTS/$__PREFIX" -type f -name "*.png" -printf "%P\n" \
-        | while read -r line; do
-
-        __TRACE="${line%-*-*}"
-        if grep -q "^$__PREFIX/$__TRACE: pass$" ".gitlab-ci/piglit/$PIGLIT_RESULTS.txt.orig"; then
-            if [ "x$CI_PROJECT_PATH" != "x$FDO_UPSTREAM_REPO" ]; then
-                continue
-            fi
-            __MINIO_PATH="$PIGLIT_REPLAY_REFERENCE_IMAGES_BASE"
-            __DESTINATION_FILE_PATH="${line##*-}"
-            if wget -q --method=HEAD "https://${__MINIO_PATH}/${__DESTINATION_FILE_PATH}" 2>/dev/null; then
-                continue
-            fi
-        else
-            __MINIO_PATH="$JOB_ARTIFACTS_BASE"
-            __DESTINATION_FILE_PATH="$__MINIO_TRACES_PREFIX/${line##*-}"
-        fi
-
-        ci-fairy minio cp $MINIO_ARGS "$RESULTS/$__PREFIX/$line" \
-            "minio://${__MINIO_PATH}/${__DESTINATION_FILE_PATH}"
-    done
-}
-
-SANITY_MESA_VERSION_CMD="$SANITY_MESA_VERSION_CMD | tee /tmp/version.txt | grep \"Mesa $MESA_VERSION\(\s\|$\)\""
-
-if [ -d results ]; then
-    cd results && rm -rf ..?* .[!.]* *
-fi
-cd /piglit
-
-if [ -n "$USE_CASELIST" ]; then
-    PIGLIT_TESTS=$(printf "%s" "$PIGLIT_TESTS")
-    PIGLIT_GENTESTS="./piglit print-cmd $PIGLIT_TESTS replay --format \"{name}\" > /tmp/case-list.txt"
-    RUN_GENTESTS="export LD_LIBRARY_PATH=$__LD_LIBRARY_PATH; $PIGLIT_GENTESTS"
-
-    eval $RUN_GENTESTS
-
-    sed -ni $CI_NODE_INDEX~$CI_NODE_TOTAL"p" /tmp/case-list.txt
-
-    PIGLIT_TESTS="--test-list /tmp/case-list.txt"
-fi
-
-PIGLIT_OPTIONS=$(printf "%s" "$PIGLIT_OPTIONS")
-
-PIGLIT_TESTS=$(printf "%s" "$PIGLIT_TESTS")
-
-PIGLIT_CMD="./piglit run --timeout 300 -j${FDO_CI_CONCURRENT:-4} $PIGLIT_OPTIONS $PIGLIT_TESTS replay "$(/usr/bin/printf "%q" "$RESULTS")
-
-RUN_CMD="export LD_LIBRARY_PATH=$__LD_LIBRARY_PATH; $SANITY_MESA_VERSION_CMD && $HANG_DETECTION_CMD $PIGLIT_CMD"
-
-if [ "$RUN_CMD_WRAPPER" ]; then
-    RUN_CMD="set +e; $RUN_CMD_WRAPPER "$(/usr/bin/printf "%q" "$RUN_CMD")"; set -e"
-fi
-
-ci-fairy minio login $MINIO_ARGS --token-file "${CI_JOB_JWT_FILE}"
-
-eval $RUN_CMD
-
-if [ $? -ne 0 ]; then
-    printf "%s\n" "Found $(cat /tmp/version.txt), expected $MESA_VERSION"
-fi
-
-ARTIFACTS_BASE_URL="https://${CI_PROJECT_ROOT_NAMESPACE}.${CI_PAGES_DOMAIN}/-/${CI_PROJECT_NAME}/-/jobs/${CI_JOB_ID}/artifacts"
-
-./piglit summary aggregate "$RESULTS" -o junit.xml
-
-PIGLIT_RESULTS="${PIGLIT_RESULTS:-replay}"
-RESULTSFILE="$RESULTS/$PIGLIT_RESULTS.txt"
-mkdir -p .gitlab-ci/piglit
-./piglit summary console "$RESULTS"/results.json.bz2 \
-    | tee ".gitlab-ci/piglit/$PIGLIT_RESULTS.txt.orig" \
-    | head -n -1 | grep -v ": pass" \
-    | sed '/^summary:/Q' \
-    > $RESULTSFILE
-
-__PREFIX="trace/$PIGLIT_REPLAY_DEVICE_NAME"
-__MINIO_PATH="$PIGLIT_REPLAY_ARTIFACTS_BASE_URL"
-__MINIO_TRACES_PREFIX="traces"
-
-if [ "x$PIGLIT_REPLAY_SUBCOMMAND" != "xprofile" ]; then
-    quiet replay_minio_upload_images
-fi
-
-
-if [ ! -s $RESULTSFILE ]; then
-    exit 0
-fi
-
-./piglit summary html --exclude-details=pass \
-"$RESULTS"/summary "$RESULTS"/results.json.bz2
-
-find "$RESULTS"/summary -type f -name "*.html" -print0 \
-        | xargs -0 sed -i 's%<img src="file://'"${RESULTS}"'.*-\([0-9a-f]*\)\.png%<img src="https://'"${JOB_ARTIFACTS_BASE}"'/traces/\1.png%g'
-find "$RESULTS"/summary -type f -name "*.html" -print0 \
-        | xargs -0 sed -i 's%<img src="file://%<img src="https://'"${PIGLIT_REPLAY_REFERENCE_IMAGES_BASE}"'/%g'
-
-quiet print_red echo "Failures in traces:"
-cat $RESULTSFILE
-quiet print_red echo "Review the image changes and get the new checksums at: ${ARTIFACTS_BASE_URL}/results/summary/problems.html"
-exit 1

.gitlab-ci/piglit/run_cl.sh

@@ -1,75 +0,0 @@
-#!/bin/bash
-
-set -e
-set -o xtrace
-
-VERSION=`head -1 install/VERSION`
-ROOTDIR=`pwd`
-
-if [ -d results ]; then
-    cd results && rm -rf ..?* .[!.]* *
-fi
-cd /piglit
-
-export OCL_ICD_VENDORS=$ROOTDIR/install/etc/OpenCL/vendors/
-
-set +e
-unset DISPLAY
-export LD_LIBRARY_PATH=$ROOTDIR/install/lib
-clinfo
-
-# If the job is parallel at the gitlab job level, will take the corresponding
-# fraction of the caselist.
-if [ -n "$CI_NODE_INDEX" ]; then
-
-    if [ "$PIGLIT_PROFILES" != "${PIGLIT_PROFILES% *}" ]; then
-        echo "Can't parallelize piglit with multiple profiles"
-        exit 1
-    fi
-    USE_CASELIST=1
-fi
-
-if [ -n "$USE_CASELIST" ]; then
-    ./piglit print-cmd $PIGLIT_TESTS $PIGLIT_PROFILES --format "{name}" > /tmp/case-list.txt
-
-    sed -ni $CI_NODE_INDEX~$CI_NODE_TOTAL"p" /tmp/case-list.txt
-
-    PIGLIT_TESTS="--test-list /tmp/case-list.txt"
-fi
-
-./piglit run -c -j${FDO_CI_CONCURRENT:-4} $PIGLIT_OPTIONS $PIGLIT_TESTS $PIGLIT_PROFILES $ROOTDIR/results
-retVal=$?
-if [ $retVal -ne 0 ]; then
-    echo "Found $(cat /tmp/version.txt), expected $VERSION"
-fi
-set -e
-
-PIGLIT_RESULTS=${PIGLIT_RESULTS:-$PIGLIT_PROFILES}
-mkdir -p .gitlab-ci/piglit
-./piglit summary console $ROOTDIR/results \
-  | tee ".gitlab-ci/piglit/$PIGLIT_RESULTS.txt.orig" \
-  | head -n -1 \
-  | grep -v ": pass" \
-  | sed '/^summary:/Q' \
-  > .gitlab-ci/piglit/$PIGLIT_RESULTS.txt
-
-if [ -n "$USE_CASELIST" ]; then
-    # Just filter the expected results based on the tests that were actually
-    # executed, and switch to the version with no summary
-    cat .gitlab-ci/piglit/$PIGLIT_RESULTS.txt.orig | sed '/^summary:/Q' | rev \
-         | cut -f2- -d: | rev | sed "s/$/:/g" > /tmp/executed.txt
-    grep -F -f /tmp/executed.txt $ROOTDIR/install/$PIGLIT_RESULTS.txt \
-         > .gitlab-ci/piglit/$PIGLIT_RESULTS.txt.baseline || true
-else
-    cp $ROOTDIR/install/$PIGLIT_RESULTS.txt .gitlab-ci/piglit/$PIGLIT_RESULTS.txt.baseline
-fi
-
-if diff -q .gitlab-ci/piglit/$PIGLIT_RESULTS.txt{.baseline,}; then
-    exit 0
-fi
-
-./piglit summary html --exclude-details=pass $ROOTDIR/results/summary $ROOTDIR/results
-
-echo Unexpected change in results:
-diff -u .gitlab-ci/piglit/$PIGLIT_RESULTS.txt{.baseline,}
-exit 1

.gitlab-ci/prepare-artifacts.sh

@@ -1,57 +0,0 @@
-#!/bin/bash
-
-set -e
-set -o xtrace
-
-CROSS_FILE=/cross_file-"$CROSS".txt
-
-# Delete unused bin and includes from artifacts to save space.
-rm -rf install/bin install/include
-
-# Strip the drivers in the artifacts to cut 80% of the artifacts size.
-if [ -n "$CROSS" ]; then
-    STRIP=`sed -n -E "s/strip\s*=\s*'(.*)'/\1/p" "$CROSS_FILE"`
-    if [ -z "$STRIP" ]; then
-        echo "Failed to find strip command in cross file"
-        exit 1
-    fi
-else
-    STRIP="strip"
-fi
-if [ -z "$ARTIFACTS_DEBUG_SYMBOLS" ]; then
-    find install -name \*.so -exec $STRIP {} \;
-fi
-
-# Test runs don't pull down the git tree, so put the dEQP helper
-# script and associated bits there.
-echo "$(cat VERSION) (git-$(git rev-parse HEAD | cut -b -10))" > install/VERSION
-cp -Rp .gitlab-ci/bare-metal install/
-cp -Rp .gitlab-ci/common install/
-cp -Rp .gitlab-ci/piglit install/
-cp -Rp .gitlab-ci/fossils.yml install/
-cp -Rp .gitlab-ci/fossils install/
-cp -Rp .gitlab-ci/fossilize-runner.sh install/
-cp -Rp .gitlab-ci/crosvm-init.sh install/
-cp -Rp .gitlab-ci/*.txt install/
-cp -Rp .gitlab-ci/report-flakes.py install/
-cp -Rp .gitlab-ci/vkd3d-proton install/
-cp -Rp .gitlab-ci/*-runner.sh install/
-find . -path \*/ci/\*.txt \
-    -o -path \*/ci/\*.toml \
-    -o -path \*/ci/\*traces\*.yml \
-    | xargs -I '{}' cp -p '{}' install/
-
-# Tar up the install dir so that symlinks and hardlinks aren't each
-# packed separately in the zip file.
-mkdir -p artifacts/
-tar -cf artifacts/install.tar install
-cp -Rp .gitlab-ci/common artifacts/ci-common
-cp -Rp .gitlab-ci/lava artifacts/
-
-if [ -n "$MINIO_ARTIFACT_NAME" ]; then
-    # Pass needed files to the test stage
-    MINIO_ARTIFACT_NAME="$MINIO_ARTIFACT_NAME.tar.gz"
-    gzip -c artifacts/install.tar > ${MINIO_ARTIFACT_NAME}
-    ci-fairy minio login --token-file "${CI_JOB_JWT_FILE}"
-    ci-fairy minio cp ${MINIO_ARTIFACT_NAME} minio://${PIPELINE_ARTIFACTS_BASE}/${MINIO_ARTIFACT_NAME}
-fi

.gitlab-ci/report-flakes.py

@@ -1,151 +0,0 @@
-#!/usr/bin/env python3
-#
-# Copyright © 2021 Google LLC
-#
-# Permission is hereby granted, free of charge, to any person obtaining a
-# copy of this software and associated documentation files (the "Software"),
-# to deal in the Software without restriction, including without limitation
-# the rights to use, copy, modify, merge, publish, distribute, sublicense,
-# and/or sell copies of the Software, and to permit persons to whom the
-# Software is furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice (including the next
-# paragraph) shall be included in all copies or substantial portions of the
-# Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
-# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
-# IN THE SOFTWARE.
-
-import argparse
-import io
-import re
-import socket
-import time
-
-
-class Connection:
-    def __init__(self, host, port, verbose):
-        self.s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
-        self.s.connect((host, port))
-        self.s.setblocking(0)
-        self.verbose = verbose
-
-    def send_line(self, line):
-        if self.verbose:
-            print(f"IRC: sending {line}")
-        self.s.sendall((line + '\n').encode())
-
-    def wait(self, secs):
-        for i in range(secs):
-            if self.verbose:
-                while True:
-                    try:
-                        data = self.s.recv(1024)
-                    except io.BlockingIOError:
-                        break
-                    if data == "":
-                        break
-                    for line in data.decode().split('\n'):
-                        print(f"IRC: received {line}")
-            time.sleep(1)
-
-    def quit(self):
-        self.send_line("QUIT")
-        self.s.shutdown(socket.SHUT_WR)
-        self.s.close()
-
-
-def read_flakes(results):
-    flakes = []
-    csv = re.compile("(.*),(.*),(.*)")
-    for line in open(results, 'r').readlines():
-        match = csv.match(line)
-        if match.group(2) == "Flake":
-            flakes.append(match.group(1))
-    return flakes
-
-def main():
-    parser = argparse.ArgumentParser()
-    parser.add_argument('--host', type=str,
-                        help='IRC server hostname', required=True)
-    parser.add_argument('--port', type=int,
-                        help='IRC server port', required=True)
-    parser.add_argument('--results', type=str,
-                        help='results.csv file from deqp-runner or piglit-runner', required=True)
-    parser.add_argument('--known-flakes', type=str,
-                        help='*-flakes.txt file passed to deqp-runner or piglit-runner', required=True)
-    parser.add_argument('--channel', type=str,
-                        help='Known flakes report channel', required=True)
-    parser.add_argument('--url', type=str,
-                        help='$CI_JOB_URL', required=True)
-    parser.add_argument('--runner', type=str,
-                        help='$CI_RUNNER_DESCRIPTION', required=True)
-    parser.add_argument('--branch', type=str,
-                        help='optional branch name')
-    parser.add_argument('--branch-title', type=str,
-                        help='optional branch title')
-    parser.add_argument('--job', type=str,
-                        help='$CI_JOB_ID', required=True)
-    parser.add_argument('--verbose', "-v", action="store_true",
-                        help='log IRC interactions')
-    args = parser.parse_args()
-
-    flakes = read_flakes(args.results)
-    if not flakes:
-        exit(0)
-
-    known_flakes = []
-    for line in open(args.known_flakes).readlines():
-        line = line.strip()
-        if not line or line.startswith("#"):
-            continue
-        known_flakes.append(re.compile(line))
-
-    irc = Connection(args.host, args.port, args.verbose)
-
-    # The nick needs to be something unique so that multiple runners
-    # connecting at the same time don't race for one nick and get blocked.
-    # freenode has a 16-char limit on nicks (9 is the IETF standard, but
-    # various servers extend that).  So, trim off the common prefixes of the
-    # runner name, and append the job ID so that software runners with more
-    # than one concurrent job (think swrast) don't collide.  For freedreno,
-    # that gives us a nick as long as db410c-N-JJJJJJJJ, and it'll be a while
-    # before we make it to 9-digit jobs (we're at 7 so far).
-    nick = args.runner
-    nick = nick.replace('mesa-', '')
-    nick = nick.replace('google-freedreno-', '')
-    nick += f'-{args.job}'
-    irc.send_line(f"NICK {nick}")
-    irc.send_line(f"USER {nick} unused unused: Gitlab CI Notifier")
-    irc.wait(10)
-    irc.send_line(f"JOIN {args.channel}")
-    irc.wait(1)
-
-    branchinfo = ""
-    if args.branch:
-        branchinfo = f" on branch {args.branch} ({args.branch_title})"
-    irc.send_line(
-        f"PRIVMSG {args.channel} :Flakes detected in job {args.url} on {args.runner}{branchinfo}:")
-
-    for flake in flakes:
-        status = "NEW "
-        for known in known_flakes:
-            if known.match(flake):
-                status = ""
-                break
-
-        irc.send_line(f"PRIVMSG {args.channel} :{status}{flake}")
-
-    irc.send_line(
-        f"PRIVMSG {args.channel} :See {args.url}/artifacts/browse/results/")
-
-    irc.quit()
-
-
-if __name__ == '__main__':
-    main()