The __glapi_gentable_set_remaining_noop() routine treats the _glapi_struct
as an array of _glapi_get_dispatch_table_size() pointers, so we have to
allocate _glapi_get_dispatch_table_size()*sizeof(void*) bytes rather
than sizeof(struct _glapi_struct) bytes.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
(cherry picked from commit 8d09f4d0cc)
We just prefix the $CLANG environment variable in configure.ac with acv_mesa_
Found by: tinderbox
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit b728eefb06)
TestMipMaps() function in src/OGLconform/textureNPOT.c calls glTexImage2D()
with width = 0. Texture with zero size skips miptree allocation due to a
condition in function _mesa_store_teximage3d(). While calling glGetTexImage()
it results in assertion failure in intel_map_texture_image() due to null mt
pointer.
This patch fixes the issue by detecting the zero size texture early in
glGetTexImage and glGetCompressedTexImage functions. In such a case function
simply returns doing nothing.
Verified that below mentioned bug is fixed by this patch.
https://bugs.freedesktop.org/show_bug.cgi?id=42334
NOTE: This is a candidate for stable branches
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit f1a9a9bcd1)
Conflicts:
src/mesa/main/teximage.h
Calling glXSwapBuffers with no bound context causes segmentation
fault in function intelDRI2Flush. All the gl calls should be
ignored after setting the current context to null. So the contents
of framebuffer stay unchanged. But the driver should not seg fault.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44614
Reported-by: Yi Sun <yi.sun@intel.com>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Yi Sun <yi.sun@intel.com>
(cherry picked from commit dd7220652e)
Conflicts:
src/mesa/drivers/dri/intel/intel_screen.c
Commit 9bdc44a528 (i965: Replace struct
with bit shifting for WM pull constant surfaces) accidentally
introduced off-by-one errors into the calculation of the surface
width, height, and depth. This patch restores the correct
computation.
The reason this wasn't noticed by Piglit tests is that the size of our
constant surfaces is always less than 2^20, therefore the off-by-one
error was causing the "depth" field of the surface to be set to all
1's. The hardware interpreted this as an extremely large surface, so
overflow checking was effectively disabled.
No Piglit regressions on Sandy Bridge.
NOTE: This is a candidate for the 7.11 and 8.0 branches.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit f6f43bd5a2)
Other parts of the compiler assume that expressions will have
well-formed types or the error type. Just using the type of the thing
being operated on can cause expressions like ~3.14 or ~false to not
have a well-formed type. This could then result in an assertion
failure in the context epxression handler.
If there is an error processing the expression, set the type of the IR
expression to error.
Fixes piglit's bit-not-0[789].frag tests.
NOTE: This is a candidate for the 7.11 branch.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42755
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: Vinson Lee <vlee@vmware.com>
(cherry picked from commit 3946448951)
LLVM 3.0svn added SubtargetInfo as additional parameter to
createMCDisassembler() and createMCInstPrinter().
See revision 139237 of LLVM.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Signed-off-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 1795372fee)
LLVM 3.0svn moved TargetRegistry.h and TargetSelect.h.
See revision 138450 of LLVM.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
(cherry picked from commit 4a468de2d7)
LLVM 3.0svn introduced a new type system. It defines a new way to create
named structs and removes the (now not needed) LLVMInvalidateStructLayout
function. See revision 134829 of LLVM.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Signed-off-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 3143e95353)
intelAllocateBuffer() was oblivious to separate stencil buffers. This
patch fixes it to allocate a non-tiled stencil buffer with special pitch,
just as the DDX does.
Without this, any app that attempted to create an EGL surface with stencil
bits would crash. Of course, this affected only environments that used the
builtin DRI2 backend, such as Android and Wayland.
Fixes GLBenchmark2.1 on Android on gen7.
Note: This is a candidate for the 7.11 branch.
Tested-by: Louie Tsaie <louie.tsai@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
(cherry picked from commit 79653c12d6)
Conflicts:
src/mesa/drivers/dri/intel/intel_screen.c
I changed the dimensions of the stencil buffer's region, as allocated by
the DDX, at xf86-video-intel commit
commit 3e55f3e88b40471706d5cd45c4df4010f8675c75
dri: Do not tile stencil buffer
But I forgot to make the analogous update to the Intel DRI2 glue in Mesa.
This patch makes that update.
Surprisingly, the mismatch did not cause any bugs. But the mismatch, if
left unfixed, *would* create bugs in the next commit.
Note: This is a candidate for the 7.11 branch.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
(cherry picked from commit 50b3356078)
When calculating the y offset needed for detiling window system stencil
buffers, replace the term
region->height * 2 + region->height % 2 - 1
with
rb->Height - 1 .
The two terms are incidentally equivalent due to some out-of-date,
incorrect code in the Intel DRI2 glue for DDX. (See
intel_process_dri2_buffer_with_separate_stencil(), line ``buffer_height /=
2;``).
Note: This is a candidate for the 7.11 branch (only the intel_span.c hunk).
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
(cherry picked from commit dc4c3a31c6)
Conflicts:
src/mesa/drivers/dri/intel/intel_fbo.c
src/mesa/drivers/dri/intel/intel_span.c
When we do a glReadPixels into the temporary buffer, we don't want to
use GL_LUMINANCE, GL_LUMINANCE_ALPHA or GL_INTENSITY since they will
compute L=R+G+B which is not what we want.
This bug has existed all along but was only exposed by the elimination
of the driver hook for glCopyTexImage() in
5874890c26.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=39604
Tested-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit e4fdc95277)
(cherry-pick note: This patch and the one before it combine to fix
CopyTexImage from RGBA window to LA texture. This was believed to
already be fixed by commit 296e6b9, but these changes were also
necessary.)
A driver trying to set up builtin uniforms is faced with a problem:
How do I walk the ir_variable structure (representing an array of
structs, or array of matrices, or struct, or whatever), and set up
driver structures so that dereference of that uniform gets the
corresponding ParameterValues[] entry. The rule in general is that
each corresponding vector-sized field of an array of structs is one
builtin uniform state slot. i965 relied on another invariant: each
state slot has a number of unique channel swizzles corresponding to
the number of elements in the field's vector, to avoid needing to walk
the glsl_type in parallel to get at vector_elements.
All of the builtin uniforms followed this behavior, except for
gl_NormalMatrix. That's a mat3 (so 3 vec3s), but it was swizzled as 3
vec4s.
Fixes piglit glsl-fs-normalmatrix.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
(cherry picked from commit cc4ddc3a1e)
It's required for ES 1.0 and 1.1, and isn't specified for ES 2.
While the comment says Mesa depends on it internally, removing it from
ES2 doesn't seem to regress any Piglit or ES2 conformance tests.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 5785cd2bf5)
The PBO only needs to be unmapped if one of the previous calls to
_mesa_validate_pbo_* succeeded. In this case, pixels will be
non-NULL. Various paths through _mesa_unmap_texmiage_pbo can hit
assertion failures or segfaults if the buffer is not mapped.
To work around this, move the call to _mesa_unmap_teximage_pbo inside
the last 'if (pixels)' block.
NOTE: this is just for 7.11 stable branch
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42268
I had a colleague hitting issues compiling with an old gcc3.2
system. These patches got them through.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry-picked from commit cbb2b4149b)
DRI2 supports this now - and already enables it explicitly - but drisw
does not and should not. Otherwise toolkits like clutter will only ever
SwapBuffers once and wait forever for an event that's not coming.
Signed-off-by: Adam Jackson <ajax@redhat.com>
(cherry picked from commit 25620eb1d2)
The kernel currently overwrites the flags, but if we stopped doing that,
this would break badly.
(cherry picked from commit faa16dc456)
BTW, this may be an actual fix for very old kernels.
https://bugs.freedesktop.org/show_bug.cgi?id=42175
Conflicts:
src/gallium/drivers/r600/evergreen_state.c
src/gallium/drivers/r600/r600_state.c
Passing type == GL_BITMAP returns 0 while error values return -1.
This fixes glPolygonStipple being compiled into display lists.
(cherry picked from commit 2ce8c3553b)
The spec says GL_INVALID_OPERATION is generated when texture!=0 and
textarget is not a legal value. We had this right for the 2D function.
(cherry picked from commit ccecc08f79)
After copy buffer on preGEN6, it is necessary to wait for the blit to
complete before returning data to the user.
This should fix the piglit test: copy_buffer_coherency (pre-GEN6).
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit fa351bd2e0)
The existing error result doesn't appear in the GL 2.1 or 3.2
compatibility specs, and triggers an unexpected GL error in Intel's
oglconform when it tries to reset the feedback state after usage so
that the "diff the state at error time vs. context init time" code
doesn't generate spurious diffs. The unexpected GL error then
translates into testcase failure. Brian wants the safety check on
buffer = NULL, though, so that people can't as easily set up a broken
buffer.
(cherry picked from commit 07e5295b6f)
This code was really broken before. A lot of the error checks were
done much later (too late), and some of the error checks would fail.
The underlying problem is that Mesa doesn't ever keep compressed paletted
textures in their original format. The textures are immediately
converted to some RGB or RGBA format.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=39991
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Tested-by: Jin Yang <jin.a.yang@intel.com>
(cherry picked from commit 3ebbfc8372)
Add intelInitExtensionsES1 to enable required and optional GLESv1
extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 6b9e4b6ca7)
Simply generate GL_INVALID_OPERATION error at display list mode. As
explained by Brian, we are going to access PBO data at compile time.
No need to defer the error at execution time.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 46d5fb576a)
Wrap _mesa_unpack_bitmap to handle the case that data is stored in pixel
buffer object.
This would make calling Bitmap with data stored in PBO by display list work.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 02b801c1ed)
v2: quote the spec; explicitly exclude the GL_BITMAP case to make code
more readable. (comments from Ian)
v3: Cast the offset by GLintptr to remove the compile warning(comments
from Brian).
I also found that I should use _mesa_sizeof_packed_type() instead,
as it includes packed pixel type, like GL_UNSIGNED_SHORT_5_6_5.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 9024d8af0a)
The patch(based on the reading of the emulator) came from while I was
trying to fix the oglc pbo texImage.1PBODefaults fail. This case
generates a texture with the width and height equal to window's width
and height respectively, then try to texture it on the whole window.
So, it's exactly one texel for one pixel. And, the min filter and mag
filter are GL_LINEAR. It runs with swrast OK, as expected. But it failed
with i965 driver.
Well, you can't tell the difference from the screen, as the error is
quite tiny. From my digging, it seems that there are some tiny error
happened while getting tex address. This will break the one texel for
one pixel rule in this case. Thus the linear result is taken, with tiny
error.
This patch would fix all oglc pbo subcase fail with the same issue on
both ILK, SNB and IVB.
v2: comments from Ian, make the address_round filed assignment consistent.
(the sampler is alread memset to 0 by the xxx_update_samper_state
caller, so need to assign 0 first)
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
(cherry picked from commit 76669381c0)
Introuduce a simple function called copy_data to do the image data copy
stuff for all the save_CompressedTex*Image function. The function check
the NULL data case to avoid some potential segfault. This also would
make the code a bit simpler and less redundance.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit e9edcf8b1d)
There is already comments show how to detect a null texture. Fix the
code to match the comments.
This would fix the oglc divzero(basic.texQOrWEqualsZero) and
divzero(basic.texTrivialPrim) test case fail.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 1a662e7c18)
Trigger GL_INVALID_ENUM error if the face paramter is not a valid value.
Trigger GL_INVALID_VALUE error if the GL_SHININESS value is out side
[0, ctx->Constant.MaxShiniess].
v2: fix the max shininess value.
v3: suggested by Brian, move the face check into glMaterialfv function
to reduce code duplicate. Also, refactor the error message.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit a11b4c1e7a)
Accroding the man page, GL_INVALID_VALUE would generated if access has any
bits set other than those valid defined bits.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 099af9e9df)
According the man page, GL_INVALID_OPERATION should generated if
glPixelZoom is executed between the execution of glBegin and the
corresponding execution of glEnd.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 7a9a8bbabd)
According the man page, GL_INVALID_OPERATION should be generated if
glIsEnabled is executed betwwen the execution of glBegin and the
correspoding execution of glEnd.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 6a98802243)
Fix error handling while calling glTexEnv with invalid texture
environment parameters.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit b020b111a8)
According to the man page, it should trigger a GL_INVALID_OPERATION
while calling some glGet* functions inside glBegin and glEnd.
This patch dose handle the following functions:
glGetBooleanv
glGetFloatv
glGetIntegerv
glGetInteger64v
glGetDoublev
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit f1ddde5c16)
According man page, trigger error when calling glEvalMesh1/2D inside
glBegin/glEnd.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 21b2895bd0)
When compiling glDrawPixels, glTexImage(), etc. and we're copying
the user's image we need to be careful about GL error checking.
Previously, we were incorrectly generating GL_OUT_OF_MEMORY in
unpack_image() if width <= 0 or height <= 0 or for invalid format/type
values. We now check those arguments in unpack_image() and return NULL
if there's a bad value. The command will get compiled with the
arguments as-is and image=NULL. Later, when the command is executed the
correct errors will be generated.
This issue was reported by Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
(cherry picked from commit 6fd6efa7bf)
The DDX may allocate a buffer with a too small size.
Instead of failing, let's pretend everything's alright.
Such bugs should be fixed in the DDX, of course.
NOTE: This is a candidate for the stable branches.
(cherry picked from commit a04f8c3612)
Conflicts:
src/gallium/drivers/r300/r300_texture.c
src/gallium/drivers/r300/r300_texture.h
src/gallium/drivers/r300/r300_texture_desc.c
When saving the active program in _mesa_meta_begin, it was actually
saving the fragment program instead. This means that if the
application binds a program that only has a vertex shader then when
the meta saved state is restored it will forget the bound program.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41969
Reviewed-by: Chad Versace <chad@chad-versace.us>
(cherry picked from commit 5625f78cd7)
Fix the constant interpolation enable bit mask for flat light mode.
FRAG_BIT_COL0 attribute bit might be 0, in which case we need to
shift one more bit right.
This would fix the oglc specularColor test fail on both Sandybridge and
Ivybridge.
v2: move the constant interp bitmask setup code into for(; attr <
FRAG_ATTRIB_MAX; attr++) loop suggested by Eric.
Also fixes the Civilization 4 intro videos.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
(cherry picked from commit cd6b8421ca)
If there is not enough space in pushbuffer for fence emission
(nouveau_fence_emit -> nv50_screen_fence_emit -> MARK_RING),
the pushbuffer is flushed, which through flush_notify ->
nv50_default_flush_notify -> nouveau_fence_update marks currently
emitting fence as flushed. But actual emission is done after this mark.
So later when there is a need to wait on this fence and pushbuffer
was not flushed in between, fence wait will never finish causing
application to hang.
To fix this, introduce new fence state between AVAILABLE and EMITTED,
set it before emission and handle it everywhere.
Additionally obtain fence sequence numbers after possible flush in
MARK_RING, because we want to emit fences in correct order.
Reviewed-by: Christoph Bumiller <e0425955@student.tuwien.ac.at>
(commit 9849f366cb in master)
Fence emission can flush the push buffer, which through flush_notify
unreferences recently emitted fence. If ref count is increased after
fence emission, unreference deletes the fence, which causes SIGSEGV.
Backtrace:
nouveau_fence_del
nouveau_fence_ref
nouveau_fence_next
nouveau_pushbuf_flush
MARK_RING
nv50_screen_fence_emit
nouveau_fence_emit
nv50_flush
This bug manifested as an assertion failure in nouveau_fence.c, because
SIGSEGV handler tried to shutdown the application and used messed up
fence.
This issue was reported by Maxim Levitsky.
(commit e1e03ce492 in master)
This is a squash of:
intel: Recognize all depth formats in get_teximage_readbuffer.
The existing code was missing GL_DEPTH_COMPONENT32, resulting in it
wrongly returning the color buffer instead of the depth buffer.
Fixes an issue in PlaneShift 0.5.7 when casting spells. The game calls
CopyTexSubImage2D on buffers with a GL_DEPTH_COMPONENT32 internal
format, which (prior to this patch) resulted in an attempt to copy
ARGB8888 to X8_Z24.
Instead of adding the missing enumeration directly, convert the code to
use _mesa_is_depth_format() and _mesa_is_depthstencil_format() as these
should catch any newly added depth formats in the future.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry-picked from commit 440224ab73)
And:
i915: Fix depth texturing since 86e62b2357
The 965 driver already had the X8_Z24 case, but 915 was missing it.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 6aae729d6e)
This prevents developer surprise at seeing a GL_DEPTH_COMPONENT
texture have stencil bits, and avoids the metaops path accidentally
copying stencil bits around in glCopyTexImage(GL_DEPTH_COMPONENT) (and
being broken because swrast's glReadPixels(GL_UNSIGNED_INT_24_8) is
broken).
Acked-by: Chad Versace <chad@chad-versace.us>
(cherry-picked from commit 86e62b2357)
As written, this test correctly raises an error for #elif being used
with an undefined macro (and not as an argument to "defined"). If the
preceding #if were '#if 1' then this diagnositc would correctly be
hidden. That allows code such as the following to not raise an error:
#ifndef MAYBE_UNDEFINED
#elif MAYBE_UNDEFINED < 5
...
#endif
So this test case is working as expected already. We add it here just
to improve test coverage.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Carl Worth <cworth@cworth.org>
(cherry picked from commit 201485bae0)
The specification reserves any macro name containing two consecutive
underscores, (anywhere within the name). Previously, we only raised
this error for macro names that started with two underscores.
Fix the implementation to check for two underscores anywhere, and also
update the corresponding 086-reserved-macro-names test.
This also fixes the following two piglit tests:
spec/glsl-1.30/preprocessor/reserved/double-underscore-02.frag
spec/glsl-1.30/preprocessor/reserved/double-underscore-03.frag
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Carl Worth <cworth@cworth.org>
(cherry picked from commit c4aaf7943c)
This is as simple as abstracting one existing block of code into a
function call and then adding a single call to that function for the
case of a non-function-like macro.
This fixes the recently-added 097-paste-with-non-function-macro test
as well as the following piglit tests:
spec/glsl-1.30/preprocessor/concat/concat-01.frag
spec/glsl-1.30/preprocessor/concat/concat-02.frag
Also, the concat-04.frag test now passes for the right reason. The
test is intended to fail the compilation, but before this commit it
was failing compilation (and hence passing the test) for the wrong
reason.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Carl Worth <cworth@cworth.org>
(cherry picked from commit 28842c2331)
Apparently we never implemented this, (but we've got a GLSL 1.30 test
in piglit that is exercising this case).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Carl Worth <cworth@cworth.org>
(cherry picked from commit 7bb3403e01)
There was already a loop here to look for multiple token pastes, but
it was mistakenly incrementing the iterator counter after performing
one paste.
Instead, leave the loop iterator in place to coalesce as many tokens
as necessary into one.
This fixes the recently add 096-paste-twice test as well as the
following piglit test:
spec/glsl-1.30/preprocessor/concat/concat-03.frag
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Carl Worth <cworth@cworth.org>
(cherry picked from commit 3c01a58944)
This makes piglit a lot more happy. The errors are logged when
INTEL_DEBUG=fallbacks because the application is about to hit a big
software fallback. We frequently ask people to run applications that
are hitting software fallbacks with INTEL_DEBUG=fallbacks so the we
can help them debug the reason for the software fallback.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 0290a018a5)
This can only happen in GLSL shaders because assembly shaders that use
too many temps are rejected by core Mesa. It is easiest to make this
happen with shaders that contain flow-control that could not be lowered.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 3bb2f0dde1)
Rely on the driver to do the right thing. This probably means falling
back to software. Page 88 of the OpenGL 2.1 spec specifically says:
"A shader should not fail to compile, and a program object should
not fail to link due to lack of instruction space or lack of
temporary variables. Implementations should ensure that all valid
shaders and program objects may be successfully compiled, linked
and executed."
There is no provision for saying "No" to a valid shader that is
difficult for the hardware to handle, so stop doing that.
On i915 this causes a large number of piglit tests to change from FAIL
to WARN. The warning is because the driver still emits messages to
stderr like "i915_program_error: Unsupported opcode: BGNLOOP".
It also fixes ES2 conformance CorrectFull_frag and CorrectParse1_frag
on i915 (and probably other hardware that can't handle loops).
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 322c3bf9dc)
This prevents assertion failures in ralloc_strcat. The ralloc_free in
_mesa_free_shader_program_data can be omitted because freeing the
gl_shader_program in _mesa_delete_shader_program will take care of
this automatically.
A bunch of this code could use a refactor to use ralloc a bit more
effectively. A bunch of the things that are allocated with malloc and
owned by the gl_shader_program should be allocated with ralloc (using
the gl_shader_program as the context).
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 89193933cb)
linker_warning is a new function. It's identical to linker_error
except that it doesn't set LinkStatus=false and it prepends "warning: "
on messages instead of "error: ".
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 379a32f42e)
Remove the other places that set LinkStatus to false since they all
immediately follow a call to linker_error. The function linker_error
was previously known as linker_error_printf. The name was changed
because it may seem surprising that a printf function will set an
error flag.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 586e741ac1)
Most of these functions used three spaces for the first level of
indentation, but four spaces for the next level. One used tabs and then
three spaces. Some used 3/4 in a then block but 3/3 in the else block.
Normally I try to avoid field days like this, but since the functions
were so inconsistent, even internally, it was making it difficult to
edit without introducing spurious whitespace changes.
So, just get it over with. git diff -b shows 0 lines changed.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit b861479f83)
Again, the check was needlessly specific: this works fine on Gen7.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 7db874bf4c4273d2d46218b1490d312fe2654284)
The check was designed to forbid it on old generations (Gen5/Ironlake),
not on new ones. It just works on Gen7/Ivybridge.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit ae5da817e2aeb9f9447fdd6d2eb4b22d6f8f6a87)
Fixes OpenArena on Gen7. Technically, adding only the first depth stall
fixes it, but the documentation says to do all three, and the Windows
driver seems to do it.
Not observed to fix anything on Gen6 yet.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38863
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 02c4dc807e91640c69c8addc3c797300a3c536ad)
At one point, the documentation said that max thread count in 3DSTATE_PS
was at bit offset 23, but it's actually 24 on Ivybridge. Not only did
this halve our thread count, it caused us to write 1 into a bit 23, which
is marked as MBZ (must be zero). Furthermore, it made us write an even
number into this field, which is apparently not allowed. Apparently we
were just lucky it worked.
NOTE: This is a candidate for the 7.11 branch.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 556e7eea80de778b44a37d51cb757ce32221d1e3)
_NEW_WINDOW_POS wasn't a real Mesa state flag, but we were missing
_NEW_BUFFERS to update the stipple offset when FBO binding or window
size changed, and _NEW_POLYGON to update when stippling gets enabled.
Fixes oglconform's tristrip test.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
(cherry picked from commit d598851d401f7f34d623c9cfbd85d7f5faccd7c2)
Because we skip the pattern upload when stippling is disabled, we need
to check again when it might have been turned on.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
(cherry picked from commit e19541aa2ad05f687c859001b62713209787c9c8)
For power-of-two sizes, h0 == mt->height0 since it's already a multiple
of two. However, for NPOT, they're different; h1 should be computed
based on the original size.
Fixes piglit test "cubemap npot" and oglconform test "textureNPOT".
NOTE: This is a candidate for stable release branches.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit bebc19448f45dbe8c3b016d440403f52e1036e15)
This was done in the old codegen path, but not the new one. Caught by
piglit fbo tests after the conversion to GLSL ff_fragment_shader.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit da53ca641106e47f1d74386d8dc0f7eebeec5225)
The previous formula for asin(x) was algebraically equivalent to:
sign(x)*(pi/2 - sqrt(1-|x|)*(A + B|x| + C|x|^2))
where A, B, and C were arbitrary constants determined by a curve fit.
This formula had a worst case absolute error of 0.00448, an unbounded
worst case relative error, and a discontinuity near x=0.
Changed the formula to:
sign(x)*(pi/2 - sqrt(1-|x|)*(pi/2 + (pi/4-1)|x| + A|x|^2 + B|x|^3))
where A and B are arbitrary constants determined by a curve fit. This
has a worst case absolute error of 0.00039, a worst case relative
error of 0.000405, and no discontinuities.
I don't expect a significant performance degradation, since the extra
multiply-accumulate should be fast compared to the sqrt() computation.
Fixes piglit tests {vs,fs}-asin-float and {vs,fs}-atan-*
(cherry picked from commit d4c80f5f85)
This patch fixes a bug in ir_hirearchical_visitor: when traversing an
exec_list representing the formal or actual parameters of a function,
it modified base_ir to point to each parameter in turn, rather than
leaving it as a pointer to the enclosing statement. This was a
problem, since base_ir is used by visitor classes to locate the
statement containing the node being visited (usually so that
additional statements can be inserted before or after it). Without
this fix, visitors might attempt to insert statements into parameter
lists.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit cc81eb09b9)
The vs-varying-array-mat2-col-row-wr test writes a mat2[3] constant to
a mat2[3] varying out array, and also statically accesses element 1 of
it on the VS and FS sides. At link time it would get trimmed down to
just 2 elements, and then codegen of the VS would end up generating
assignments to the unallocated last entry of the array. On the new
i965 VS backend, that happened to land on the vertex position.
Some issues remain in this test on softpipe, i965/old-vs and
i965/new-vs on visual inspection, but i965 is passing because only one
green pixel is probed, not the whole split green/red quad.
The array_lvalue field was attempting to enforce the restriction that
whole arrays can't be used on the left-hand side of an assignment in
GLSL 1.10 or GLSL ES, and can't be used as out or inout parameters in
GLSL 1.10.
However, it was buggy (it didn't work properly for built-in arrays),
and it was clumsy (it unnecessarily kept track on a
variable-by-variable basis, and it didn't cover the GLSL ES case).
This patch removes the array_lvalue field completely in favor of
explicit checks in ast_parameter_declarator::hir() (this check is
added) and in do_assignment (this check was already present).
This causes a benign behavioral change: when the user attempts to pass
an array as an out or inout parameter of a function in GLSL 1.10, the
error is now flagged at the time the function definition is
encountered, rather than at the time of invocation. Previously we
allowed such functions to be defined, and only flagged the error if
they were invoked.
Fixes Piglit tests
spec/glsl-1.10/compiler/qualifiers/fn-{out,inout}-array-prohibited*
and
spec/glsl-1.20/compiler/assignment-operators/assign-builtin-array-allowed.vert.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 00792e3586)
Previously, it would produce:
Failed to compile FS: 0:6(7): error: non-lvalue in assignment
and now it produces:
Failed to compile FS: 0:5(7): error: whole array assignment is not
allowed in GLSL 1.10 or GLSL ES 1.00.
Also, add spec quotation to the two places we have code for array
lvalues in GLSL 1.10.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 525cec98a5)
The check now applies both when explicitly declaring the size of
gl_TexCoord and when implicitly setting the size of gl_TexCoord by
accessing it using integral constant expressions.
This is prep work for adding similar size checks to gl_ClipDistance.
Fixes piglit tests texcoord/implicit-access-max.{frag,vert}.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 93b9758d01)
This patch fixes a bug when lowering an integer division:
x/y
to a multiplication by a reciprocal:
int(float(x)*reciprocal(float(y)))
If x was a plain int and y was an ivecN, the lowering pass
incorrectly assigned the type of the product to be float, when in fact
it should be vecN. This caused mesa to abort with an IR validation
error.
Fixes piglit tests {fs,vs}-op-div-int-ivec{2,3,4}.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit af501e2b29)
When an out parameter undergoes an implicit type conversion, we need
to store it in a temporary, and then after the call completes, convert
the resulting value. In other words, we convert code like the
following:
void f(out int x);
float value;
f(value);
Into IR that's equivalent to this:
void f(out int x);
float value;
int out_parameter_conversion;
f(out_parameter_conversion);
value = float(out_parameter_conversion);
This transformation needs to happen during ast-to-IR convertion (as
opposed to, say, a lowering pass), because it is invalid IR for formal
and actual parameters to have types that don't match.
Fixes piglit tests
spec/glsl-1.20/compiler/qualifiers/out-conversion-int-to-float.vert and
spec/glsl-1.20/execution/qualifiers/vs-out-conversion-*.shader_test,
and bug 39651.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=39651
Reviewed-by: Chad Versace <chad@chad-versace.us>
(cherry picked from commit 67b5a3267d)
process_array_type() contains an assertion to verify that no IR
instructions are generated while processing the expression that
specifies the size of the array. This assertion needs to happen
_after_ checking whether the expression is constant. Otherwise we may
crash on an illegal shader rather than reporting an error.
Fixes piglit tests array-size-non-builtin-function.vert and
array-size-with-side-effect.vert.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit d4144a123b)
Rearranged the logic for converting the ast for a function call to
hir, so that we constant fold before emitting any IR. Previously we
would emit some IR, and then only later detect whether we could
constant fold. The unnecessary IR would usually get cleaned up by a
later optimization step, however in the case of a builtin function
being used to compute an array size, it was causing an assertion.
Fixes Piglit test array-size-constant-relational.vert.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38625
(cherry picked from commit 789ee6516b)
The ast-to-hir conversion needs to emit function signatures in two
circumstances: when a function declaration (or definition) is
encountered, and when a built-in function is encountered.
To avoid emitting a function signature in an illegal place (such as
inside a function), emit_function() checked whether we were inside a
function definition, and if so, emitted the signature before the
function definition.
However, this didn't cover the case of emitting function signatures
for built-in functions when those built-in functions are called from
inside the constant integer expression that specifies the length of a
global array. This failed because when processing an array length, we
are emitting IR into a dummy exec_list (see process_array_type() in
ast_to_hir.cpp). process_array_type() later checks (via an assertion)
that no instructions were emitted to the dummy exec_list, based on the
reasonable assumption that we shouldn't need to emit instructions to
calculate the value of a constant.
This patch changes emit_function() so that it emits function
signatures at toplevel in all cases.
This partially fixes bug 38625
(https://bugs.freedesktop.org/show_bug.cgi?id=38625). The remainder
of the fix is in the patch that follows.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 0d81b0e184)
opt_dead_functions contained a shortcut to skip processing the first
function's body, based on the assumption that IR functions are
topologically sorted, with callees always coming before their callers
(therefore the first function cannot contain any calls).
This assumption turns out not to be true in general. For example, the
following code snippet gets translated to IR that violates this
assumption:
void f();
void g();
void f() { g(); }
void g() { ... }
In practice, the shortcut didn't cause bugs because of a coincidence
of the circumstances in which opt_dead_functions is called:
(a) we do inlining right before dead function elimination, and
inlining (when successful) eliminates all calls.
(b) for user-defined functions, inlining is always successful, because
previous optimization passes (during compilation) have reduced
them to a form that is eligible for inlining.
(c) the function that appears first in the IR can't possibly call a
built-in function, because built-in functions are always emitted
before the function that calls them.
It seems unnecessarily fragile to have opt_dead_functions depend on
these coincidences. And the next patch in this series will break (c).
So I'm reverting the shortcut. The consequence will be a slight
increase in link time for complex shaders.
This reverts commit c75427f4c8.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 482338842d)
The previous formula for atan(x,y) returned a value of +/- pi whenever
|x|<0.0001, and used a formula based on atan(y/x) otherwise. This
broke in cases where both x and y were small (e.g. atan(1e-5, 1e-5)).
This patch modifies the formula so that it returns a value of +/- pi
whenever |x|<1e-8*|y|, and uses the formula based on atan(y/x)
otherwise.
(cherry picked from commit b1b4ea0b36)
The constant used in the radians() function didn't have enough
precision, causing a relative error of 1.676e-5, which is far worse
than the precision of 32-bit floats. This patch reduces the relative
error to 1.14e-9, which is the best we can do in 32 bits.
Fixes piglit tests {fs,vs}-radians-{float,vec2,vec3,vec4}.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit fe33c886a7)
Normally lower_jumps.cpp doesn't need to lower a break instruction
that occurs at the end of a loop, because all back-ends can produce
proper GPU instructions for a break instruction in this "canonical"
location. However, if other break instructions within the loop are
already being lowered, then a break instruction at the end of the loop
needs to be lowered too, since after the optimization is complete a
new conditional break will be inserted at the end of the loop.
Without this patch, lower_jumps.cpp may require multiple passes in
order to lower all jumps. This results in sub-optimal output because
lower_jumps.cpp produces a brand new set of temporary variables each
time it is run, and the redundant temporary variables are not
guaranteed to be eliminated by later optimization passes.
Fixes unit test test_lower_breaks_6.
(cherry picked from commit 067c9d7bd7)
Conflicts:
src/glsl/lower_jumps.cpp
Previously, lower_jumps.cpp would break out of its loop after lowering
a jump instruction in just the then- or else-branch of a conditional,
and it would fail to lower a jump instruction occurring in the other
branch.
Without this patch, lower_jumps.cpp may require multiple passes in
order to lower all jumps. This results in sub-optimal output because
lower_jumps.cpp produces a brand new set of temporary variables each
time it is run, and the redundant temporary variables are not
guaranteed to be eliminated by later optimization passes.
Fixes unit test test_lower_returns_4.
(cherry picked from commit e71b4ab8a6)
The visitor class in lower_jumps.cpp never removes or replaces the
instruction being visited, but it frequently alters or removes the
instructions that follow it. Therefore, to make sure the altered IR
is visited, it needs to iterate through exec_lists using foreach_list
rather than visit_exec_list().
Without this patch, lower_jumps.cpp may require multiple passes in
order to lower all jumps. This results in sub-optimal output because
lower_jumps.cpp produces a brand new set of temporary variables each
time it is run, and the redundant temporary variables are not
guaranteed to be eliminated by later optimization passes.
Also, certain invariants assumed by lower_jumps.cpp may fail to hold,
causing assertion failures.
Fixes unit tests test_lower_pulled_out_jump,
test_lower_unified_returns, test_lower_guarded_conditional_break,
test_lower_return_non_void_at_end_of_loop, and test_lower_returns_3.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 382cee91a4)
Previously, lower_jumps.cpp would only lower return and continue
statements that appeared inside conditionals. This patch makes it
lower unconditional returns and continue statements that occur inside
a loop.
Such unconditional flow control statements would be unlikely to be
explicitly coded by a reasonable user, however they might arise as a
result of other optimizations.
Without this patch, lower_jumps.cpp might not lower certain return and
continue statements, causing some backends to fail.
Fixes unit tests test_lower_return_void_at_end_of_loop and
test_remove_continue_at_end_of_loop.
(cherry picked from commit 03145ba655)
Conflicts:
src/glsl/lower_jumps.cpp
Previously, do_lower_jumps.cpp determined whether to lower return
statements in ir_lower_jumps_visitor::should_lower_jumps(). Moved
this logic to ir_lower_jumps_visitor::visit(ir_function_signature *),
so that it can be used in determining whether to lower a return
statement at the end of a function.
(cherry picked from commit dbaa2e627e)
Previously, lower_jumps.cpp only lowered return statements that
appeared inside of an if statement.
Without this patch, lower_jumps.cpp might not lower certain return
statements, causing some back-ends to fail (as in bug #36669).
Fixes unit test test_lower_returns_1.
(cherry picked from commit afc9a50fba)
If color material mode is enabled, constant buffer entries related
to the material coefficients will depend on glColor. So add
_NEW_CURRENT_ATTRIB to the bitset returned for material-related
constants in _mesa_program_state_flags().
This fixes a bug exercised by the new piglit draw-arrays-colormaterial
test.
Note: This is a candidate for the 7.11 branch.
(cherry picked from commit 57169c4694)
If we're generating a mipmap for an sRGB texture we need to bypass
sRGB->linear conversion. Otherwise the destination mipmap level
(drawn with a textured quad) will have the wrong colors.
If we can't turn of sRGB->linear conversion (GL_EXT_texture_sRGB_decode)
we need to use the software fallback for mipmap generation.
Note: This is a candidate for the 7.11 branch.
(cherry picked from commit 1e939f5374)
The 1-bit alpha channel was incorrectly encoded. Previously, any non-zero
alpha value for the ubyte alpha value would set A=1. Instead, use the
most significant bit of the ubyte alpha to determine the A bit. This is
consistent with the other channels and other OpenGL implementations.
Note: This is a candidate for the 7.11 branch.
Reviewed-by: Michel Dänzer <michel@daenzer.net>
(cherry picked from commit 4731a598f0)
This fixes spurious GL errors when the GL_EXT_framebuffer_sRGB extension
is not supported.
Note: This is a candidate for the 7.11 branch
(cherry picked from commit 6e423253e7)
Instructions with 3 source operands have no write mask, so we may replace their
destinations with PV/PS in the next group even if their dst.write is 0.
Note: This is a candidate for the 7.11 branch.
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fdb62ef3f5)
Need to do full check when not all bank swizzles in the group are forced
(e.g. when trying to merge interp_* group with the next instruction)
Note: This is a candidate for the 7.11 branch.
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6ba68c7654)
Conflicts:
src/gallium/drivers/r600/r600_asm.c
Remove the 'f' suffix from a float literal.
- .float 0.0f+1.0
+ .float 1.0
This fixes the following compile error with clang:
error: unexpected token in directive
.float 0.0f+1.0
^
Note: This is a candidate for the stable branches.
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Chad Versace <chad@chad-versace.us>
(cherry picked from commit 9cd64ec35a)
validate_program relies on validate_shader_program to fill in errMsg;
empirically, there exist cases where that doesn't happen.
While tracking those down may be worthwhile, initializing the string so
we don't try to ralloc_strdup random garbage also seems wise.
Fixes issues caught by valgrind while running some test case.
NOTE: This is a candidate for stable release branches.
Reviewed-by: Chad Versace <chad@chad-versace.us>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit db726b048e)
DRI2 will throw BadRequest for this when the client is not local, but
DRI2 is an implementation detail and not something callers should have
to know about. Silently swallow errors in this case, and just propagate
the failure through DRI2Connect's return code.
Note: This is a candidate for the stable release branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=28125
Signed-off-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
(cherry picked from commit fbc2fcf685)
Unlike C++, empty declarations such as
float;
should be valid. The spec is not explicit about this actually.
Some apps that generate their shader sources may rely on this. This was
noted when porting one of them to Linux from Windows.
Reviewed-by: Chad Versace <chad@chad-versace.us>
Note: this is a candidate for the 7.11 branch.
(cherry picked from commit 547212d963)
Use backend_map kernel query if supported, otherwise analyze ZPASS_DONE
results to get the mask.
Fixes lockups with predicated rendering due to incorrect query buffer
initialization on some cards.
Note: this is a candidate for the 7.11 branch.
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6eb94fc344)
Array constructors obey narrower conversion rules than other constructors
[1] --- they use the implicit conversion rules [2] instead of the scalar
constructor conversions [3]. But process_array_constructor() was
incorrectly applying the broader rules.
[1] GLSL 1.50 spec, Section 5.4.4 Array Constructors, page 52 (58 of pdf)
[2] GLSL 1.50 spec, Section 4.1.10 Implicit Conversions, page 25 (31 of pdf)
[3] GLSL 1.50 spec, Section 5.4.1 Conversion, page 48 (54 of pdf)
To fix this, first check (with glsl_type::can_be_implicitly_converted_to)
if an implicit conversion is legal before performing the conversion.
Fixes:
piglit:spec/glsl-1.20/compiler/structure-and-array-operations/array-ctor-implicit-conversion-bool-float.vert
piglit:spec/glsl-1.20/compiler/structure-and-array-operations/array-ctor-implicit-conversion-bvec*-vec*.vert
Note: This is a candidate for the 7.10 and 7.11 branches.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chad Versace <chad@chad-versace.us>
(cherry picked from commit a5ab9398e3)
The function is no longer used and has been replaced by
glsl_type::can_implicitly_convert_to().
Note: This is a candidate for the 7.10 and 7.11 branches.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chad Versace <chad@chad-versace.us>
(cherry picked from commit 6efe1a8495)
Context
-------
In ast_function_expression::hir(), parameter_lists_match() checks if the
function call's actual parameter list matches the signature's parameter
list, where the match may require implicit conversion of some arguments.
To check if an implicit conversion exists between individual arguments,
type_compare() is used.
Problems
--------
type_compare() allowed the following illegal implicit conversions:
bool -> float
bvecN -> vecN
int -> uint
ivecN -> uvecN
uint -> int
uvecN -> ivecN
Change
------
type_compare() is buggy, so replace it with glsl_type::can_be_implicitly_converted_to().
This comprises a rewrite of parameter_lists_match().
Fixes piglit:spec/glsl-1.20/compiler/built-in-functions/outerProduct-bvec*.vert
Note: This is a candidate for the 7.10 and 7.11 branches.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chad Versace <chad@chad-versace.us>
(cherry picked from commit 8b3627fd7b)
This method checks if a source type is identical to or can be implicitly
converted to a target type according to the GLSL 1.20 spec, Section 4.1.10
Implicit Conversions.
The following commits use the method for a bugfix:
glsl: Fix implicit conversions in non-constructor function calls
glsl: Fix implicit conversions in array constructors
Note: This is a candidate for the 7.10 and 7.11 branches.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chad Versace <chad@chad-versace.us>
(cherry picked from commit 200e4972c1)
Certain attributes (position, psize, etc.) don't
count as params; they are handled separately by the hw.
However, the VS is required to export at least one param
and r600_shader_from_tgsi() takes care of adding a dummy
export if there is none. Make sure the VS param export
count in the SPI properly accounts for this.
Note: This is a candidate for the 7.11 branch.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dc1c0ca22a)
Tested-by: Jon TURNEY <jon.turney@dronecode.org.uk>
NOTE: This is a candidate for the 7.11 branch.
(cherry picked from commit c6f59fcd00)
Conflicts:
configure.ac
When parsing S-Expressions, we need to store nul-terminated strings for
Symbol nodes. Prior to this patch, we called ralloc_strndup each time
we constructed a new s_symbol. It turns out that this is obscenely
expensive.
Instead, copy the whole buffer before parsing and overwrite it to
contain \0 bytes at the appropriate locations. Since atoms are
separated by whitespace, (), or ;, we can safely overwrite the character
after a Symbol. While much of the buffer may be unused, copying the
whole buffer is simple and guaranteed to provide enough space.
Prior to this, running piglit-run.py -t glsl tests/quick.tests with GLSL
1.30 enabled took just over 10 minutes on my machine. Now it takes 5.
NOTE: This is a candidate for stable release branches (because it will
make running comparison tests so much less irritating.)
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 3875526926)
Bitmap caching shouldn't affect the results of the queries and
conditional render.
NOTE: This is a candidate for the 7.11 branch.
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Signed-off-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 4f4855b249)
This is probably nicer if the array size ever changes.
NOTE: This is a candidate for the 7.11 branch.
Signed-off-by: Henri Verbeet <hverbeet@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 4744195628)
The total number of units used by a shader is limited to MAX_TEXTURE_UNITS,
but the actual indices are only limited by MAX_COMBINED_TEXTURE_IMAGE_UNITS,
since they're shared between vertex and fragment shaders.
NOTE: This is a candidate for the 7.11 branch.
Signed-off-by: Henri Verbeet <hverbeet@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 86adc2b29e)
Using GLuint pointers worked when the pixel size was four bytes
or the row stride was a multiple of four but was otherwise broken.
Fixes failures found with the piglit fbo-stencil test.
This helps to fix https://bugs.freedesktop.org/show_bug.cgi?id=38729
NOTE: This is a candidate for the 7.11 branch.
(cherry picked from commit b786db0654)
We almost never want to specify a condition, and when we do we're
already thinking about it (because we're writing a lowering pass
generating the condition), so a default argument should make the code
more pleasant to read.
NOTE: This is a candidate for the 7.11 branch (we want to be able to
cherry-pick future code).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit e617a53a74)
Like the previous commit, but fixes
ARB_vertex_program/getlocal4d-with-error.
v2: Move the success case line into the conditional, use ASSIGN_4V more.
(cherry picked from commit c9aac11713)
From the NV_conditional_render spec:
BeginQuery sets the active query object name for the query type given by
<target> to <id>. If BeginQuery is called with an <id> of zero, if the
active query object name for <target> is non-zero, if <id> is the active
query object name for any query type, or if <id> is the active query
object for condtional rendering (Section 2.X), the error INVALID OPERATION
is generated.
Fixes piglit nv_conditional_render-begin-while-active.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit fd17de2123)
From the NV_conditional_render spec:
BeginQuery sets the active query object name for the query type given by
<target> to <id>. If BeginQuery is called with an <id> of zero, if the
active query object name for <target> is non-zero, if <id> is the active
query object name for any query type, or if <id> is the active query
object for condtional rendering (Section 2.X), the error INVALID OPERATION
is generated.
Fixes piglit nv_conditional_render-begin-zero.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 7371224c06)
The implementation deviated slightly from the GL_EXT_texture_sRGB spec
and from other implementations. A giant comment block was added to
justify the somewhat odd behavior of this function.
In addition, the interface had unnecessary cruft. The 'all' parameter
was false at all callers, so it has been removed.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit b189d1635d)
If an application requests a generic compressed format for a texture
and the driver does not pick a specific compressed format, return the
generic base format (e.g., GL_RGBA) for the GL_TEXTURE_INTERNAL_FORMAT
query.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=3165
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 143b65f761)
We were primarily failing to convert in the NativeIntegers case, which
this fixes. However, we were also just truncating float uniforms when
converting to integer, which does not appear to be the correct
behavior. Note, however, that the NVIDIA drivers also truncate
instead of rounding.
GL_DOUBLE return type is dropped because it was never used and
completely broken. It can be added when there's test code.
Fixes piglit ARB_shader_objects/getuniform
v2: This is a rewrite of my previous glGetUniform patch, which Ken
pointed out missed storage_type-based conversions to integer,
which was totally broken still thanks to a typo in the testcase.
v3: Quote the spec justifying the rounding behavior.
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 9fa41f0742)
Conflicts:
src/mesa/main/uniforms.c
- first determine the buffer range to upload for each buffer by walking over
vertex elements
- take buffer_offset into account
- take src_offset into account
- take src_format into account in more places
- don't just blindly upload (stride*count) bytes
NOTE: This is a candidate for the 7.11 branch.
(cherry picked from commit cd9bbb3935)
It can now override both buffer offsets and strides in additions to resources.
Overriding buffer offsets was kinda hackish and could cause issues with
non-native vertex formats.
Without this we'd miss the last update in a sequence like {COLOR0, COLOR1},
{COLOR0}, {COLOR0, COLOR1}. I originally had a patch for this that called
updated_drawbuffers() when the buffer count changed, but later realized that
was wrong. The ARB_draw_buffers spec explicitly says "The draw buffer for
output colors beyond <n> is set to NONE.", and this is queryable state.
This fixes piglit arb_draw_buffers-state_change.
NOTE: This is a candidate for the 7.11 branch.
Signed-off-by: Henri Verbeet <hverbeet@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit a4d72189b2)
The flush extensions flush call indicates end of frame and should only
be called once per frame. However, in the dri2SwapBuffer fallback
path, we call flush and then call dri2CopySubBuffer, which also calls
flush. Refactor the code to only call flush once.
(cherry picked from commit 4a7667b96b)
Prevents potential assertion failures in piglit fbo-incomplete-texture-03 test.
NOTE: This is a candidate for the 7.11 branch.
(cherry picked from commit 4beb8f9e9d)
Fixes a bug caught by oglconform, and now piglit
ARB_vertex_program/getenv4d-with-error. The wrapping of an existing
GL function made it so that we couldn't distinguish an error in
looking up our arguments from an existing error. Instead, make a
helper function to choose the param, and use it from multiple callers.
v2: Move the success case line into the conditional, use COPY_4V more.
(cherry picked from commit e9d563e3ff)
We should remove the relocations which caused a validation failure
from the list, so that the kernel receives only the validated ones.
NOTE: This is a candidate for the 7.11 branch.
(cherry picked from commit 64ab39b035)
Conflicts:
src/gallium/winsys/radeon/drm/radeon_drm_cs.c
That code drops performance in Unigine Heaven and Tropics
by a factor of 10. That's too crazy even for a debug build.
NOTE: This is a candidate for the 7.11 branch.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit c251d83d91)
The previous commit removed the last use of this field.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit f73caddd33)
The purpose of the (irb->draw_offset & 4095) != 0 check was to ensure
that we don't have XYy offsets into a tile, since Gen4 hardware doesn't
support that. However, it's insufficient: there are cases where
draw_offset & 4095 is 0 but we still have a Y-offset. This leads to an
assertion failure in brw_update_renderbuffer_surface with tile_y != 0.
Instead, simply call intel_renderbuffer_tile_offsets to compute the
actual X/Y offsets and check if either are non-zero. This makes both
the workaround and the assertion check the same things.
Fixes piglit test fbo-generatemipmap-formats, and should also fix
bugs #34009 and #39487.
NOTE: This is a candidate for stable release branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=34009
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=39487
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Chad Versace <chad@chad-versace.us>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 15c0bc5eef)
We were neglecting to load dvdx and dvdy. v is not optional.
Fixes glslparsertests tex-grad-0[12345].frag on Broadwater/Crestline.
(We still need an execution test using sampler1D.)
NOTE: This is a candidate for the 7.11 branch.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 3e1fd13f60)
Commit 1a339b6c71 made
st_ChooseTextureFormat map GL_RGBA with type GL_UNSIGNED_BYTE
to PIPE_FORMAT_A8B8G8R8_UNORM.
The image format for ARGB pixmaps is PIPE_FORMAT_B8G8R8A8_UNORM
however. This mismatch caused the texture to be recreated in
st_finalize_texture.
NOTE: This is a candidate for the 7.11 branch.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=39209
Signed-off-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Brian Paul <brianp@vmware.com>
The index buffer state emit only occurred if there was an IB in place
and we were in either a new batch or a new IB state. But because we
only flagged new IB state if IB state changed from the last IB state
we calculated, we could simply never emit IB state after batchbuffer
wraps if the first draw didn't use the IB and we didn't actually
change the IB.
Fixes piglit glx-multi-context-ib-1.
(cherry picked from commit 818db3848b)
It turns out that internally the texture cache gets flushed in a
couple of cases, particularly around 2D operations mixed with 3D. In
almost all cases one of those happens between rendering to an
FBO-attached texture and rendering from that texture. However, as of
the next patch, glean tfbo (and the new fbo-flushing-2 test) would
manage to get stale texture values because one of those flushes didn't
occur. The intention of this code was always to get the render cache
cleared and ready to be used from the sampler cache (and it does on <=
gen4), so this just catches gen5 up.
This patch was also tested to fix fbo-flushing on gen7.
(cherry picked from commit 185868c9c2)
When emitting a MAC instruction in a vertex shader, brw_vs_emit()
calls accumulator_contains() to determine whether the accumulator
already contains the appropriate addend; if it does, then we can avoid
emitting an unnecessary MOV instruction.
However, accumulator_contains() wasn't checking the val.negate or
val.abs flags. As a result, if the desired value was the negation, or
the absolute value, of what was already in the accumulator, we would
generate an incorrect shader.
Fixes piglit test vs-refract-vec4-vec4-float.
Tested on Gen5 and Gen6.
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit d92463d5dc)
On Ivybridge, the shadow comparitor goes in the first slot, rather than
at the end. It's not necessary to send u, v, and r.
Fixes tests texturing/texdepth and glean/fbo.
NOTE: This is a candidate for the 7.11 branch.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 572f631895)
Commit 53c89c67f3 ("i965: Avoid generating
MOVs for assignments of expressions.") added the line "this->result =
reg_undef" all over the code. Unfortunately, since Eric developed his
patch before I landed Ivybridge support, he missed adding it to
fs_visitor::emit_texture_gen7() after rebasing.
Furthermore, since I developed TXD support before Eric's patch, I
neglected to add it to the gradient handling when I rebased.
Neglecting to set this causes the visitor to use this->result as storage
rather than generating a new temporary. These missing statements
resulted in the same register being used to store several different
values.
Fixes the following piglit tests on Ivybridge:
- glsl-fs-shadow2dproj.shader_test
- glsl-fs-shadow2dproj-bias.shader_test
NOTE: This is a candidate for the 7.11 branch.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 156cef0fba)
Previously the code would just look at deref->array->type to see if it
was a constant. This isn't good enough because deref->array might be
another ir_dereference_array... of a constant. As a result,
deref->array->type wouldn't be a constant, but
deref->variable_referenced() would return NULL. The unchecked NULL
pointer would shortly lead to a segfault.
Instead just look at the return of deref->variable_referenced(). If
it's NULL, assume that either a constant or some other form of
anonymous temporary storage is being dereferenced.
This is a bit hinkey because most drivers treat constant arrays as
uniforms, but the lowering pass treats them as temporaries. This
keeps the behavior of the old code, so this change isn't making things
worse.
Fixes i965 piglit:
vs-temp-array-mat[234]-index-col-rd
vs-temp-array-mat[234]-index-col-row-rd
vs-uniform-array-mat[234]-index-col-rd
vs-uniform-array-mat[234]-index-col-row-rd
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 156f85336f)
Leaving the unused registers with other values caused assertion
failures and other problems in places that blindly iterate over all
sources.
brw_vs_emit.c:1381: get_src_reg: Assertion `c->regs[file][index].nr !=
0' failed.
Fixes i965 piglit:
vs-uniform-array-mat[234]-col-row-rd
vs-uniform-array-mat[234]-index-col-row-rd
vs-uniform-array-mat[234]-index-row-rd
vs-uniform-mat[234]-col-row-rd
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit fbeb68e880)
This fixes many cases of accessing arrays of matrices using
non-constant indices at each level.
Fixes i965 piglit:
vs-temp-array-mat[234]-index-col-rd
vs-temp-array-mat[234]-index-col-row-rd
vs-temp-array-mat[234]-index-col-wr
vs-uniform-array-mat[234]-index-col-rd
Fixes swrast piglit:
fs-temp-array-mat[234]-index-col-rd
fs-temp-array-mat[234]-index-col-row-rd
fs-temp-array-mat[234]-index-col-wr
fs-uniform-array-mat[234]-index-col-rd
fs-uniform-array-mat[234]-index-col-row-rd
fs-varying-array-mat[234]-index-col-rd
fs-varying-array-mat[234]-index-col-row-rd
vs-temp-array-mat[234]-index-col-rd
vs-temp-array-mat[234]-index-col-row-rd
vs-temp-array-mat[234]-index-col-wr
vs-uniform-array-mat[234]-index-col-rd
vs-uniform-array-mat[234]-index-col-row-rd
vs-varying-array-mat[234]-index-col-rd
vs-varying-array-mat[234]-index-col-row-rd
vs-varying-array-mat[234]-index-col-wr
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit d6e1a8f714)
If the non-constant index was in the LHS of an assignment, any
existing condititon on that assignment would be lost.
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 601428d2bb)
If the non-constant index was in the LHS of an assignment, any
existing condititon on that assignment would be lost.
Fixes i965 piglit:
fs-temp-array-mat[234]-col-row-wr
fs-temp-array-mat[234]-index-col-row-wr
fs-temp-array-mat[234]-index-col-wr
fs-temp-array-mat[234]-index-row-wr
vs-varying-array-mat[234]-index-col-wr
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 5f83dfe5b7)
The previous implementation could easily get tricked if the LHS of an
assignment included a non-constant index that was "inside" another
dereference. For example:
mat4 m[2];
m[0][i] = vec4(0.0);
Due to the way it tracked whether the array was being assigned, it
would think that the non-constant index was in an r-value. The new
code fixes that by tracking l-values and r-values differently. The
index is also replaced by cloning the IR and replacing the index
variable instead of the odd way it was done before.
v2: Apply some simplifications suggested by Eric Anholt. Making
assignment_generator::rvalue be ir_dereference instead of ir_rvalue
simplified the code a bit.
Fixes i965 piglit fs-temp-array-mat[234]-index-wr and
vs-varying-array-mat[234]-index-wr.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=34691
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 1731ac3086)
To make bisects work, this also squashes in:
glsl: Correctly return progress from lower_variable_index_to_cond_assign
lower_variable_index_to_cond_assign runs until it can't make any more
progress. It then returns the result of the last pass which will
always be false. This caused the lowering loop in
_mesa_ir_link_shader to end before doing one last round of
lower_if_to_cond_assign. This caused several if-statements (resulting
from lower_variable_index_to_cond_assign) to be left in the IR.
In addition to this change, lower_variable_index_to_cond_assign should
take a flag indicating whether or not it should even generate
if-statements. This is easily controlled by
switch_generator::linear_sequence_max_length. This would generate
much better code on architectures without any flow contol.
Fixes i915 piglit regressions glsl-texcoord-array and
glsl-fs-vec4-indexing-temp-src.
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit c1e591eed4)
Other code will soon need to know if an array needs lowering based
exclusively on the storage mode.
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit d2296e784a)
There's no reason for it to be there, and another class that may not
have access to the visitor will need it soon.
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 8d5f3cef79)
The GLSL 1.20 and later specs say:
"Recursion is not allowed, not even statically. Static recursion is
present if the static function call graph of the program contains
cycles."
Recursion is detected and rejected both a compile-time and at
link-time. The complie-time check happens to detect some cases that
may be removed by various optimization passes. The spec doesn't seem
to allow this, but other vendors (e.g., NVIDIA) appear to only check
at link-time after all optimizations.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=33885
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 02c5ae1b3f)
This also squashes in the following commit to make sure that bisects
in scons builds work:
glsl: Add ir_function_detect_recursion.cpp to SConscript.
(cherry picked from commit 76bccaff0c)
u_vbuf_upload_buffers modifies the buffer offsets. If they are not
restored, and any of the vertex formats is not supported natively, the
next u_vbuf_mgr_draw_begin call will translate the vertex buffers with
incorrect buffer offsets.
(cherry picked from commit afc160e1c8)
Signed-off-by: Marek Olšák <maraeo@gmail.com>
In a rare case of building gallium only, we need to
check if the required packages are available
libdrm_[intel|nouveau] - gallium[i915 i965|nouveau]
v2: r300g and r600g do not need libdrm_radeon
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Marek Olšák <maraeo@gmail.com>
(cherry picked from commit c2426bbf86)
Conflicts:
configure.ac
ES 2.0.25 page 127 says:
If the value of FRAMEBUFFER_ATTACHMENT_OBJECT_TYPE is NONE, then
querying any other pname will generate INVALID_ENUM.
See also:
b9e9df78a0
NOTE: This is a candidate for the 7.10 and 7.11 branches.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 000896c0bb)
The behavior of flushes in the hardware is a maze of twisty passages,
and strangely the VS constants appear to be loaded during a pipeline
flush instead of at the time of the packet emit according to the
simulator. On moving the STATE_BASE_ADDRESS packet to where it really
needed to live (in order for data loads by other packets to be
correct), we sometimes no longer got a flush between those packets
where we apparently needed it. This replicates the flushes implied by
a STATE_BASE_ADDRESS update, fixing the GPU hangs in OGLC and the
"engine" demo.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=36821
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=39257
Tested-by: Keith Packard <keithp@keithp.com> (bzflag and etracer fixed)
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 3e5d36267d)
There's scary stuff going on in PIPE_CONTROL internals, and if the
BSpec says to do this to make PIPE_CONTROL work, I'll go ahead and do
it because we'll probably never be able to debug it after the fact.
v2: Use stall at scoreboard instead of depth stall, as noted by Ken.
(cherry picked from commit 407785d0e9)
For this and occlusion queries, we're trying to avoid setting
I915_GEM_DOMAIN_RENDER for the write domain, because the data written
is definitely not going through the render cache, but we do need to
tell the kernel that the object has been written. However, with using
I915_GEM_DOMAIN_GTT, the kernel on retiring the batchbuffer sees that
the w/a BO has a write domain of GTT, and puts it on the flushing
list. If something tries to wait for that BO to finish rendering
(such as the AUB dumper reading the contents of BOs), we get into
wait_request (since obj->active) but with a 0 seqno (since the object
is on the flushing list, not actually on a ringbuffer), and BUG_ONs.
To avoid the kernel bug (which I'm hoping to delete soon anyway), just
use I915_GEM_DOMAIN_INSTRUCTION like occlusion queries do. This
doesn't result in more flushing, because we invalidate INSTRUCTION on
every batchbuffer now that we're state streaming, anyway.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit dc7422405f)
We were updating our new viewport using the old buffers' _WindowMap.m.
We can do less math and avoid using that deprecated matrix by just
folding the viewport calculation right in to the driver.
Fixes piglit fbo-depthtex.
(cherry picked from commit debf751aea)
i915_update_draw_buffers() already handles the fallback bit for
missing stencil region, so here we just need to handle whether the GL
thinks we have stencil data or not (and disable the test if so).
(cherry picked from commit 79fee3a76b)
We were disabling it once at the moment we changed draw buffers, but
later enabling of depth test could turn it back on. Fixes
fbo-nodepth-test.
Note that ctx->DrawBuffer has to be checked because during context
create we get called while it's still unset. However, we know we'll
get an intel_draw_buffer() after that, so it's safe to make a silly
choice at this point.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30080
(cherry picked from commit fc4fba52cf)
The illusion of shared code here wasn't fooling anybody. It was
tempting to keep i830 and i915 still shared, but I think I actually
want to make them diverge shortly.
Reviewed-by: Chad Versace <chad@chad-versace.us>
(cherry picked from commit f34ec6169d)
Instead of using a chain of manually maintained if/else blocks to
handle "#extension" directives, we now consult a table that specifies,
for each extension, the circumstances under which it is available, and
what flags in _mesa_glsl_parse_state need to be set in order to
activate it.
This makes it easier to add new GLSL extensions in the future, and
fixes the following bugs:
- Previously, _mesa_glsl_process_extension would sometimes set the
"_enable" and "_warn" flags for an extension before checking whether
the extension was supported by the driver; as a result, specifying
"enable" behavior for an unsupported extension would sometimes cause
front-end support for that extension to be switched on in spite of
the fact that back-end support was not available, leading to strange
failures, such as those in
https://bugs.freedesktop.org/show_bug.cgi?id=38015.
- "#extension all: warn" and "#extension all: disable" had no effect.
Notes:
- All extensions are currently marked as unavailable in geometry
shaders. This should not have any adverse effects since geometry
shaders aren't supported yet. When we return to working on geometry
shader support, we'll need to update the table for those extensions
that are available in geometry shaders.
- Previous to this commit, if a shader mentioned
ARB_shader_texture_lod, extension ARB_texture_rectangle would be
automatically turned on in order to ensure that the types
sampler2DRect and sampler2DRectShadow would be defined. This was
unnecessary, because (a) ARB_shader_texture_lod works perfectly well
without those types provided that the builtin functions that
reference them are not called, and (b) ARB_texture_rectangle is
enabled by default in non-ES contexts anyway. I eliminated this
unnecessary behavior in order to make the behavior of all extensions
consistent.
NOTE: This is a candidate for the 7.10 and 7.11 branches.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 3097715d41)
These were previously 1-bit-wide bitfields. Changing them to bools
has a negligible performance impact, and allows them to be accessed by
offset as well as by direct structure access.
NOTE: This is a candidate for the 7.10 and 7.11 branches.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 9c4445de6e)
This is a squash cherry pick commit of:
glsl: Find the "closest" signature when there are multiple matches.
Previously, ir_function::matching_signature had a fatal bug: if a
function had more than one non-exact match, it would simply return NULL.
This occured, for example, when looking for max(uvec3, uvec3):
- max(vec3, vec3) -> score 1 (found first)
- max(ivec3, ivec3) -> score 1 (found second...used to return NULL here)
- max(uvec3, uvec3) -> score 0 (exact match...the right answer)
This did not occur for max(ivec3, ivec3) since the second match found
was an exact match.
The new behavior is to return a match with the lowest score. If there
is an exact match, that will be returned. Otherwise, a match with the
least number of implicit conversions is chosen.
Fixes piglit tests max-uvec3.vert and glsl-inexact-overloads.shader_test.
NOTE: This is a candidate for the 7.10 and 7.11 branches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 60eb63a855)
glsl: Suppress warning from matching_signature change.
gcc isn't smart enough to see that we only look at matched_score after
we've initialized it (because match != NULL happens at the same time)
(cherry picked from commit b043409adf)
glsl: Reject ambiguous function calls (multiple inexact matches).
According to the GLSL 1.20 specification, "it is a semantic error if
there are multiple ways to apply [implicit] conversions [...] such that
the call can be made to match multiple signatures."
Fixes a regression caused by 60eb63a855,
which implemented the wrong policy of finding a "closest" match.
However, this is not a revert, since the original code failed to
continue looking for an exact match once it found two inexact matches.
It's OK to have multiple inexact matches if there's also an exact match.
NOTE: This is a candidate for the 7.10 and 7.11 branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38971
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 7304909d65)
This brings us into compliance with page 17 (page 22 of the PDF) of
the GLSL 1.20 spec:
"[Sampler types] can only be declared as function parameters or
uniform variables (see Section 4.3.5 "Uniform"). ... [Samplers]
cannot be used as out or inout function parameters."
The spec isn't explicit about whether this rule applies to
structs/arrays containing shaders, but the intent seems to be to
ensure that it can always be determined at compile time which sampler
is being used in each texture lookup. So to avoid creating a
loophole, the rule needs to apply to structs/arrays containing shaders
as well.
Fixes piglit tests spec/glsl-1.10/compiler/samplers/*.frag, and fixes
bug 38987.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38987
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit f07221056e)
The new location, as a member function of glsl_type, is more
consistent with queries like is_sampler(), is_boolean(), is_float(),
etc. Placing the function inside glsl_type also makes it available to
any code that uses glsl_types.
(cherry picked from commit ddc1c96390)
The GLSL spec says:
"If a built-in function is redeclared in a shader (i.e., a
prototype is visible) before a call to it, then the linker will
only attempt to resolve that call within the set of shaders that
are linked with it."
This patch enforces this behavior. When a function call is processed
a flag is set in the ir_call to indicate whether the previously seen
prototype is the built-in or not. At link time a call will only bind
to an instance of a function that matches the "want built-in" setting
in the ir_call.
This has the odd side effect that first call to abs() in the shader
below will call the built-in and the second will not:
float foo(float x) { return abs(x); }
float abs(float x) { return -x; }
float bar(float x) { return abs(x); }
This seems insane, but it matches what the spec says.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31744
(cherry picked from commit 66f4ac988d)
This version is mostly Dan's post to the mesa-dev mailing list on
6/22/2011.
NOTE: This is a candidate for the 7.10 and 7.11 branches.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
(cherry picked from commit db311b45be)
This is exactly analogous to Eric's Gen6 change in commit
6861a70177. His explanation:
"This is just like PointSprite overrides, but it's always on for that
attribute."
Fixes glsl-fs-pointcoord and gtf/point_sprites.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry-picked from commit 186e37c754)
This is exactly analogous to Eric's Gen6 change in commit
f304bb8a5d. His explanation:
"We were assuming that the input attribute n to the FS was
FRAG_ATTRIB_TEXn, which happened to be true often enough for our
testcases."
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry-picked from commit 147d010295)
Commit b46dc45cee claimed that
NEW_POLYGONSTIPPLE is gratuitous, but somehow just changed comments
and whitespace instead of actually removing the flag.
While we're at it, 3DSTATE_PS doesn't appear to need NEW_LINE or
NEW_POLYGON either (those are in 3DSTATE_WM). Also, 3DSTATE_WM
doesn't appear to need BRW_NEW_NR_WM_SURFACES or BRW_NEW_CURBE_OFFSETS
either (those are in 3DSTATE_PS).
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry-picked from commit 57b57f6d1c)
This fixes a regression introduced by commit
a26121f375 (fd.o bug #39219).
Since the __glXInitialize() call should be unnecessary anyway, this is
probably a nicer fix for the original problem too.
NOTE: This is a candidate for the 7.10 and 7.11 branches.
Signed-off-by: Henri Verbeet <hverbeet@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: padfoot@exemail.com.au
(cherry picked from commit 0f20e2e18f)
Until now, the stencil buffer was allocated as a Y tiled buffer, because
in several locations the PRM states that it is. However, it is actually
W tiled. From the PRM, 2011 Sandy Bridge, Volume 1, Part 2, Section
4.5.2.1 W-Major Format:
W-Major Tile Format is used for separate stencil.
The GTT is incapable of W fencing, so we allocate the stencil buffer with
I915_TILING_NONE and decode the tile's layout in software.
This fix touches the following portions of code:
- In intel_allocate_renderbuffer_storage(), allocate the stencil
buffer with I915_TILING_NONE.
- In intel_verify_dri2_has_hiz(), verify that the stencil buffer is
not tiled.
- In the stencil buffer's span functions, the tile's layout must be
decoded in software.
This commit mutually depends on the xf86-video-intel commit
dri: Do not tile stencil buffer
Author: Chad Versace <chad@chad-versace.us>
Date: Mon Jul 18 00:38:00 2011 -0700
On Gen6 with separate stencil enabled, fixes the following Piglit tests:
bugs/fdo23670-drawpix_stencil
general/stencil-drawpixels
spec/EXT_framebuffer_object/fbo-stencil-GL_STENCIL_INDEX16-copypixels
spec/EXT_framebuffer_object/fbo-stencil-GL_STENCIL_INDEX16-drawpixels
spec/EXT_framebuffer_object/fbo-stencil-GL_STENCIL_INDEX16-readpixels
spec/EXT_framebuffer_object/fbo-stencil-GL_STENCIL_INDEX1-copypixels
spec/EXT_framebuffer_object/fbo-stencil-GL_STENCIL_INDEX1-drawpixels
spec/EXT_framebuffer_object/fbo-stencil-GL_STENCIL_INDEX1-readpixels
spec/EXT_framebuffer_object/fbo-stencil-GL_STENCIL_INDEX4-copypixels
spec/EXT_framebuffer_object/fbo-stencil-GL_STENCIL_INDEX4-drawpixels
spec/EXT_framebuffer_object/fbo-stencil-GL_STENCIL_INDEX4-readpixels
spec/EXT_framebuffer_object/fbo-stencil-GL_STENCIL_INDEX8-copypixels
spec/EXT_framebuffer_object/fbo-stencil-GL_STENCIL_INDEX8-drawpixels
spec/EXT_framebuffer_object/fbo-stencil-GL_STENCIL_INDEX8-readpixels
spec/EXT_packed_depth_stencil/fbo-stencil-GL_DEPTH24_STENCIL8-copypixels
spec/EXT_packed_depth_stencil/fbo-stencil-GL_DEPTH24_STENCIL8-readpixels
spec/EXT_packed_depth_stencil/readpixels-24_8
Note: This is a candidate for the 7.11 branch.
Signed-off-by: Chad Versace <chad@chad-versace.us>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit f7dbcba280)
Because we don't support them.
For instance, R32G32B32 is not R32G32B32X32 as was assumed.
Add support for R8G8B8X8_UNORM instead of R8G8B8_UNORM surfaces.
Use all zpass data for predication instead of the last block only.
Use query buffer as a ring instead of reusing the same area
for each new BeginQuery. All query buffer offsets are in bytes
to simplify offsets math.
We were failing at rounding, misplacing the non-baselevels. Fixes:
3DFX_texture_compression_FXT1/fbo-generate-mipmaps
ARB_texture_compression/fbo-generate-mipmaps
EXT_texture_compression_s3tc/fbo-generate-mipmaps
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit f2fd0d6304)
The first rendering after context create didn't know of the color
buffer yet, triggering a sw fallback. The intel_prepare_render() from
intelSpanRenderStart then found the buffer and turned off fallbacks,
but intelSpanRenderFinish was never called and things were left
mapped. By checking buffers before making the call on whether to do
the fallback pipeline or not, we avoid the fallback change inside of
the rendering pipeline.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31561
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 6e6b388604)
There's no pretty way to avoid the overwriting of the src operands, so
just use a temporary destination and rely on the MOV optimization.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 46a7639174)
We were stomping over the source for the body of the LIT instruction
when doing the MOV of 1.0 to the uninteresting channels.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit e3ea5bc08e)
Even if we don't have a current context, if we're freeing the rb we
should free its region (and BO). The renderbuffer unreference checks
appear to be just cargo-cult from the region unreference code.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30217
Reviewed-by: Chad Versace <chad@chad-versace.us>
(cherry picked from commit 007c2d6cd2)
This should help us avoid leaking regions in region reference code by
making the API more predictable.
Reviewed-by: Chad Versace <chad@chad-versace.us>
(cherry picked from commit 036b74a7f8)
(cherry picked from commit d8f65c07e9)
The scissor state was incorrectly in a .prepare function instead of
.emit, so the packet would end up in the batch before the
STATE_BASE_ADDRESS. It appears that this doesn't actually hurt, as
the scissor address gets dereferenced according to the current SBA at
draw time.
(cherry picked from commit cd7bfd5d44)
From ARB_framebuffer_object:
If a buffer is specified in <mask> and does not exist in both the
read and draw framebuffers, the corresponding bit is silently
ignored.
(cherry picked from commit 83478e5d59)
This was tricky. We were doing a use-before-initialize of
grf_reg_count, but the value usually got overwritten anyway -- when we
didn't have to do a relocation (typical), or on gen5 when we didn't
have relocations at all.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38771
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit d03fdc4cde)
You'd think that with all the commit messages about adding stuff to
tarballs or fixing 'make tarballs' that someone would have noticed
that it was completely broken for 4 months (3158cc7).
Previously, if max_depth were 1, the following code would see the
first if-statement (correctly) not get flattened, but the second
if-statement would (incorrectly) get flattened:
void main()
{
if (a)
gl_Position = vec4(0);
if (b)
gl_Position = vec4(1);
}
This is because the visit_leave(ir_if*) method would not decrement the
depth before returning on the first if-statement.
NOTE: This is a candidate for the 7.10 and 7.11 branches.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit d2c6cef18a)
SUB & LRP instructions should toggle NEG bit instead of setting it,
otherwise e.g. "SUB a,b,-1" is translated as "ADD a,b,-1"
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
For 0^0 case result of "LOG_CLAMPED ...,0" is -MAX_FLOAT, and then result of
"MUL_LIT ...,0,-MAX_FLOAT,..." is -MAX_FLOAT instead of 0 because of special
src1 checks for -MAX_FLOAT. So swap src0/1:
"MUL_LIT ...,-MAX_FLOAT,0,..." to get expected 0, then result of
"EXP_IEEE ...,0" is 1 as expected for LIT.
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
LLVM 3.0svn changes pretty rapidly. The change in
Target->createMCInstPrinter() signature which inspired commits
40ae214067 and
92e29dc5b0 has been reverted.
Signed-off-by: Gustaw Smolarczyk <wielkiegie@gmail.com>
Signed-off-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit fc98444bd5)
Conflicts:
src/gallium/auxiliary/gallivm/lp_bld_debug.cpp
Otherwise PIPE_FORMAT_X8B8G8R8_UNORM and friends would fail.
NOTE: This is a candidate for the 7.10 and 7.11 branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 292148dc4b)
From the OpenGL docs for GL_ARB_explicit_attrib_location:
This extension provides a method to pre-assign attribute locations to
named vertex shader inputs and color numbers to named fragment shader
outputs.
This was accidentally implemented for fragment shader inputs. This
patch fixes it to apply to fragment shader outputs.
Fixes piglit tests
spec/ARB_explicit_attrib_location/1.{10,20}/compiler/layout-{01,03,06,07,08,09,10}.frag
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
NOTE: This is a candidate for the 7.10 and 7.11 branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38624
(cherry picked from commit b078aad8ab)
Fixes an assertion failure in the piglib out-01.frag
ARB_explicit_attrib_location test. The locations set via the layout
qualifier in fragment shader were not being applied to the shader
outputs. As a result all of these variables still had a location of
-1 set.
This may need some more work for pre-3.0 contexts. The problem is
dealing with generic outputs that lack a layout qualifier. There is
no way for the application to specify a location
(glBindFragDataLocation is not supported) or query the location
assigned by the linker (glGetFragDataLocation is not supported).
NOTE: This is a candidate for the 7.10 and 7.11 branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38624
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Vinson Lee <vlee@vmware.com>
(cherry picked from commit d32d4f780f)
And don't delete them. Let ralloc clean them up. Deleting the
temporary IR leaves dangling references in the prog_instruction. That
results in a bad dereference when printing the IR with MESA_GLSL=dump.
NOTE: This is a candidate for the 7.10 and 7.11 branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38584
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit dbda466fc0)
Use
$(MKLIB) -ldflags '-L$(TOP)/$(LIB_DIR)'
instead of
$(MKLIB) -L$(TOP)/$(LIB_DIR)
to make sure the local library path appears before system's.
(cherry picked from commit 24137afb31)
Move system libraries (usually .so) out of --start-group / --end-group
pair. Add possiblly missing archives, defines, and shared libraries.
(cherry picked from commit 56ec8e17d3)
Considering fbdev as an in-kernel window system,
- opening a device opens a connection
- there is only one window: the framebuffer
- fb_var_screeninfo decides window position, size, and even color format
- there is no pixmap
Now EGL is built on top of this window system. So we should have
- the fd as the handle of the native display
- reject all but one native window: NULL
- no pixmap support
modeset support is still around, but it should be removed soon.
(cherry picked from commit aa281dd392)
Remove set_event_handler() and pass the event handler with
native_get_XXX_platform(). Add init_screen() so that the pipe screen is
created later. This way we don't need to pass user_data to
create_display().
(cherry picked from commit 73df31eedd)
Commit 1a339b6c(st/mesa: prefer native texture formats when possible)
introduced two new arguments to the st_choose_format() functions.
This patch fixes the order and passes the correct internal_target
rather than GL_NONE
NOTE: This is a candidate for the 7.11 branch
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 9b5c538726)
Blending and maybe even alpha-test don't work with those formats.
Only supporting RGBA, BGRA, RGBX, BGRX.
NOTE: This is a candidate for the 7.10 and 7.11 branches.
(cherry picked from commit bc517d64da)
The Mingw port for Mesa 3-D Graphics Library was created August 30, 1998 by Paul Garceau.
Updated January 13, 2000; June 3, 2005 -- Paul Garceau <pgarceau@users.sourceforge.net>
DISCLAIMER: I make this port of the Mesa 3-D Graphics Library as a service
to the general public. I can, in no way support or make any guarantee that the
build will work for your system.
Acknowledgements:
Daniel Borca, whose work and commitment to maintaining the Mingw port of the Mesa 3-D Graphics Library has been, and will continue to be greatly appreciated by an overworked and underpaid developer such as myself.
Without the creative inspiration and personal commitment provided by Mumit Khan, Jan-Jaap Vanderhagen and Colin Peters, Mingw would never have existed. Acknowledgements also need to be given to all of the developers who have worked on Mingw, Mesa and Msys over the years.
Last, but certainly far from the least, Brian Paul, who has dedicated at least the last seven or eight years of his life to making Mesa 3-D Graphics Library what it is today and managing the development for all of those years.
Feel free to modify or change things related to the Mingw build as you see fit, just remember that, the author of the current build may not be able to support any modifications you might want to make to the files which have been included for the build.
Mesa core components are licensed under XFree-86 (for more on licensing of Mesa 3-D Graphics Library, check out the Mesa homepage (http://www.mesa3d.org).
The Mingw generated libraries themselves are licensed under the GNU-LGPL license. Source code for Mingw can be found at http://www.mingw.org. For licensing terms on Mingw, please visit http://www.mingw.org.
It is recommended that you use the latest "stable" release of Mingw. "Candidates" are beta testing distributions for Mingw. Mingw is available at http://www.mingw.org.
This build has been tested under WinNT4/SP6. Win9x and WinNT5 remain untested by me. I have not tested any of the demos included with Mesa3d.
Installation:
This readme assumes that you already have extracted the necessary files to a working directory/folder that Mingw can use to build the Mesa3D libraries and that you know where that directory/folder is located on your Windows system. If you have any questions about how to set things up properly which is specific to Mesa3D, the folks on the Mesa3D mailing lists (http://www.mesa3d.org) would probably be happy to assist you. Also you can probably ask anyone on the Mingw mailing lists for any questions specific to Mingw (http://www.mingw.org)
Targets and Environment variables used for Mingw build:
Before going into the actual build of the libraries, here is a list of available targets for the make process:
"all" or "libgl" -- this target will build libopengl.a, a static library. It will not build the demos, etc.
clean -- this target will clean up most of the Mesa 3-D Graphics Library/object code from your hard drive.
realclean -- this target will clean up all of the Mesa 3D Graphics Library and the Mesa object code that it can find.
Environment Variables:
The environment variables are used to determine what sort of graphics driver support needs to be included in the finished Mesa 3-D Graphics Library.
GLIDE path to Glide3 SDK; used with FX.
default = $(TOP)/glide3
FX=1 build for 3dfx Glide3. Note that this disables
compilation of most WMesa code and requires fxMesa.
As a consequence, you'll need the Win32 Glide3
library to build any application.
default = no
ICD=1 build the installable client driver interface
(windows opengl driver interface)
default = no
X86=1 optimize for x86 (if possible, use MMX, SSE, 3DNow).
default = no
Running the Build:
Launch Mingw.
From the Windows Command Prompt:
Set Environment Variables (as needed).
"cd" to your Mesa3D 'root' directory.
Enter "mingw32-make -f makefile.mgw <target>
That's all there is to it.
Enjoy!
Paul G. <pgarceau@users.sourceforge.net>
Daniel Borca <dborca@users.sourceforge.net>
******This section is added by Heromyth <zxpmyth@yahoo.com.cn>*************
====================
Updated on 2007-7-21
====================
Notice:
1) The generated DLLs are *not* compatible with the ones built
with the other compilers like VC8, especially for GLUT.
2) Although more tests are needed, it can be used individually!
3) You can set the options about whether using STDCALL to build MESA. The
config file is <Mesa3D-root>\configs\config.mgw. The default setting is that:
ALL_USING_STDCALL = 1
, which means using STDCALL to build MESA.
4) Of course, you can MESA without using STDCALL,I like this:)
The setting is :
ALL_USING_STDCALL = 0
To do this, however, you must modify wingdi.h which is in MingW's include dir.
For example, run:
notepad C:\MingW\include\wingdi.h
, and delete all the lines where all the wgl*() functions are. Because they would
be conflicted with the ones in <Mesa3D-root>\include\GL\mesa_wgl.h.
The NeXT support has now been incorporated into the OpenStep support.
You can build NeXT libraries simply by typing "make next", though before
linking they will need to be ranlib'd by hand. For more information see
the README.OpenStep file, together with the README files in OpenStep/Old_Demos.
-Pete French. (pete@ohm.york.ac.uk) 28/5/1998
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
