When intel_finalize_mipmap_tree() calls intel_miptree_copy_teximage()
to reassemble a depth miptree that has been broken apart into pieces
(to deal with misalignment of levels/layers within the miptree), it
just copies the depth data, not the HiZ data. This is reasonable,
since the alignment restrictions of HiZ are a large part of the reason
why the miptree had to be broken apart in the first place. However,
in order for the depth copy to be sufficient, we need to do a depth
resolve first, to make sure any deferred depth writes that are in the
HiZ buffer get performed.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=64662 and
https://bugs.freedesktop.org/show_bug.cgi?id=64659.
NOTE: This is a candidate for stable release branches.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
(cherry picked from commit 46ea804107)
The multiplication part of tgsi_umad did not work on Cayman, because it did
not populate the correct vector slots.
This fixed hardlocks in the EXT_transform_feedback/order tests.
NOTE: This is a candidate for the stable branches.
(might not be easy to cherry-pick though)
Signed-off-by: Marek Olšák <maraeo@gmail.com>
Stable backport:
Signed-off-by: Dave Airlie <airlied@redhat.com>
When moving the renderbuffer to a new miptree, we neglected to allocate
the hiz buffer for the new miptree. Oops.
Fixes all Piglit depthstencil-render-miplevels tests from crash to pass on
Sandybridge.
Note: This is a candidate for the 9.1 branch.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
(cherry picked from commit aa391976df)
The commit below exposed a bug in dri2_add_config.
commit 3998f8c6b5
Author: Ralf Jung <post@ralfj.de>
Date: Tue Apr 9 14:09:50 2013 +0200
egl/x11: Fix initialisation of swap_interval
This little code snippet near the bottom of dri2_add_config,
if (double_buffer) {
...
conf->base.MinSwapInterval = dri2_dpy->min_swap_interval;
conf->base.MaxSwapInterval = dri2_dpy->max_swap_interval;
}
it never did what it claimed to do. The assignment never changed the value
of conf->base.MaxSwapInterval, because dri2_dpy->max_swap_interval was,
until the above exposing commit, unitialized here. That is,
conf->base.MaxSwapInterval was 0 before and after assignment. Ditto for
the min swap interval.
Above the troublesome code snippet, the call to _eglFilterArray rejects
the config as unmatching if its swap interval bounds differ from the base
config's. Before the exposing commit, at the call to _eglFilterArray, the
swap interval bounds were always [0,0], and hence no config was rejected
due to swap interval.
After the exposing commit, _eglFilterArray incorrectly rejected some
configs, which prevented dri2_egl_config::dri_double_config from getting
set for the rejected config, which resulted in a NULL pointer getting
passed into dri2CreateNewDrawable, and then segfault.
The solution: set the swap interval bounds before _eglFilterArray.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63447
Tested-by: Lu Hua <huax.lu@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
(cherry picked from commit d3dfce3276)
This list appears in the fixed bugs section of the release notes.
v2: Add usage examples
NOTE: This is a candidate for the stable branches.
(cherry picked from commit ca79b72c00)
The constant packets for gen6 are too small for gen7, and while IVB seems
happy with them HSW blows up. Fix it by emitting the correct packets on
gen7, for all stages.
v2: Include the packets instead of just skipping them.
NOTE: This is a candidate for the stable branches.
Reviewed-and-tested-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 5d06c9ea0f)
The GPU apparently goes looking for constants even though there are no
shader stages enabled, and gets stuck because we haven't told it there are
no constants to collect. If any other user of the 3D pipeline had run
(even the Render accel of the X server!) since power on, then the in-GPU
constant buffers would have been set up with some contents we didn't use,
and we would succeed.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56416
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Dave Airlie <airlied@redhat.com>
NOTE: This is a candidate for the stable branches.
(cherry picked from commit 1dfea559c3)
The shadow comparitor needs to be loaded into the Z component of the
last DWord.
Fixes es3conform's shadow_execution_vert and oglconform's
shadow-grad advanced.textureGrad.1D tests on Haswell.
NOTE: This is a candidate for stable branches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit b5b6460c40)
According to the Ivybridge PRM, Volume 4 Part 1, page 130, in the
section for the sample_d message: "The r coordinate contains the faceid,
and the r gradients are ignored by hardware."
This doesn't match GLSL, which provides gradients for all of the
coordinates. So we would need to do some math to compute the face ID
before using sample_d. We currently don't have any code to do that.
However, we do have a lowering pass that converts textureGrad to
textureLod, which solves this problem. Since textureGrad on three
components is sufficiently obscure, it's not a performance path.
For now, only handle samplerCubeShadow; we need tests for samplerCube
and samplerCubeArray.
Fixes es3conform's shadow_comparison_frag test on Haswell.
NOTE: This is a candidate for stable branches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit e2f887b243)
Consider the following shader:
vec4 f(vec4 v) { return v; }
vec4 f(vec4 v);
The prototype exactly matches the signature of the earlier definition,
so there's absolutely no point in it. However, it doesn't appear to
be illegal. The GLSL 4.30 specification offers two relevant quotes:
"If a function name is declared twice with the same parameter types,
then the return types and all qualifiers must also match, and it is the
same function being declared."
"User-defined functions can have multiple declarations, but only one
definition."
In this case the same function was declared twice, and there's only one
definition, which fits both pieces of text. There doesn't appear to be
any text saying late prototypes are illegal, so presumably it's valid.
Unfortunately, it currently triggers an assertion failure:
ir_dereference_variable @ <p1> specifies undeclared variable `v' @ <p2>
When we process the second line, we look for an existing exact match so
we can enforce the one-definition rule. We then leave sig set to that
existing function, and hit sig->replace_parameters(&hir_parameters),
unfortunately nuking our existing definition's parameters (which have
actual dereferences) with the prototype's bogus unused parameters.
Simply bailing out and ignoring such late prototypes is the safest
thing to do.
Fixes Piglit's late-proto.vert as well as 3DMark/Ice Storm for Android.
NOTE: This is a candidate for stable branches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Ian Romanick <idr@freedesktop.org>
(cherry picked from commit 6c5cf8baa1)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=39251
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61773
Running piglit with this was causing all sort of weird stuff happening
to my desktop (Chromium webpages become blank, Qt Creator flickered,
etc). I tracked this down to shared memory segment leakage when GL is
not shutdown properly. The segments can be seen running `ipcs` and
looking for nattch==0.
This changes fixes this by calling shmctl(IPC_RMID) soon after creation
(which does not remove the segment immediately, but simply marks it for
removal when no more processes are attached).
This matches src/mesa/drivers/x11/xm_buffer.c behaviour.
v2:
- move shmctl(IPC_RMID) after XShmAttach() for *BSD, per Chris Wilson
- remove stray debug printfs, spotted by Ian Romanick
NOTE: This is a candidate for stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit e29525f79f)
because the code looks at the visual if there is a depth or stencil buffer
before enabling depth or stencil, respectively.
NOTE: This is a candidate for the stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit d23c7455ae)
This fixes a crash when a resource cannot be mapped to the CPU's address space
because it's too big.
This puts a global pipe_context in r600_screen, which is guarded by a mutex,
so that we can use pipe_context when there isn't one around.
Hopefully our multi-context support is solid.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
NOTE: This is a candidate for the 9.1 branch.
(cherry picked from commit b692076420)
Although this might be useful for ARB_clear_buffer_object,
I need it for initializating resources in r600g.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
v2: comment cleanups
NOTE: This is a candidate for the 9.1 branch.
(cherry picked from commit 1ba46bbb4c)
Per message on mesa-users list, this wasn't working before.
Note: This is a candidate for the stable branches.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 877e3c1d42)
For some reason I made this happen under indirect rendering,
I think we might have a leak, valgrind gave out, so I said I'd
fix the basic problem.
NOTE: This is a candidate for stable branches.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 47bd6e46fe)
The caller of NewTextureObject does the right thing if NULL is returned,
so this function should do the right thing too.
NOTE: This is a candidate for stable branches.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 505ac6ddc6)
This was originally discovered by Klocwork analysis:
Possible memory leak. Dynamic memory stored in 'srcBuffer0'
allocated through function 'malloc' at line 566 can be lost at line
746
However, I think the problem is actually much worse. Since the memory
is freed after the first pass through the loop, the released buffer may
be used on the next iteration!
NOTE: This is a candidate for stable release branches.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit a27c6e1aea)
Inserting the value for the second quad in the wrong place for the
following shuffle. This meant the row or image stride was undefined which is
quite catastrophic, can lead to bogus texels fetched or just segfault.
This code is only hit for SoA path currently, still surprising it
didn't crash more or caused more visible issues (I think llvm used a
broadcast shuffle for the undefined parts of the vector, hence the undefined
value for the second quad was just the same as that from the first quad,
so as long as both quads hit the same mip level everything was fine, and since
lower mips always have the same large stride it made it less likely to
hit out-of-bound memory in case of differing lods).
Note: this is a candidate for stable branches.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
(cherry picked from commit 1d6eb23f2d)
The other dispatch tables (Exec and Save) are freed, but BeginEnd is
never freed. This was found by inspection why investigating the leak of
shared state in _mesa_initialize_context.
NOTE: This is a candidate for stable branches
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 1faaa411c7)
Back up at line 1017 (not shown in patch), we add a reference to the
shared state. Several places after that may divert to the error
handler, but, as far as I can tell, nothing ever unreferences the shared
state.
Fixes issue identified by Klocwork analysis:
Resource acquired to 'shared->TexMutex' at line 1012 may be lost
here. Also there is one similar error on line 1087.
NOTE: This is a candidate for the stable branches.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 6e06550e4e)
dri2_create_surface can fail for a variety of reasons, including bad
input data. Dereferencing the NULL pointer and crashing is not okay.
Fixes issue identified by Klocwork analysis:
Pointer 'surf' returned from call to function 'dri2_create_surface'
at line 285 may be NULL and will be dereferenced at line 291.
NOTE: This is a candidate for the stable branches.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit f730c210b8)
Duh.
Fixes issues identified by Klocwork analysis:
Pointer 'table' returned from call to function 'calloc' at line 115
may be NULL and will be dereferenced at line 117.
and
Suspicious dereference of pointer 'table' before NULL check at line
119.
NOTE: This is a candidate for the stable branches.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 2cc0b3294a)
Reported and tested by degasus on #radeon.
Note: This is a candidate for the 9.1 branch
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit cb12bf7606)
The EGLConfig attributes EGL_MIN/MAX_SWAP_INTERVAL were incorrectly set to
0 and 0. This prevented clients from setting the swap interval to a
reasonable value, like 1 or 2.
Swap interval worked correctly in Mesa 9.0. The commit below introduced
the bug.
commit 7e9bd2b2ed
Author: Eric Anholt <eric@anholt.net>
Date: Tue Sep 25 14:05:30 2012 -0700
egl: Add support for driconf control of swapinterval.
Note: This is a candidate for the 9.1 branch.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63078
[chadv: Wrote commit message]
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 3998f8c6b5)
The software-tracked transform feedback offsets (svbi_0_starting_index)
are incorrect in the presence of primitive restart, so we were actually
updating it with a bogus value if the batch wrapped and we emitted the
packet again during a single transform feedback. By reducing state
emission, we avoid the bug.
Fixes piglit OpenGL 3.1/primitive-restart-xfb flush
Reviewed-by: Paul Berry <stereotype441@gmail.com>
NOTE: This is a candidate for the 9.1 branch.
(cherry picked from commit 007a88ed24)
The software-tracked transform feedback offsets (svbi_0_starting_index)
are incorrect in the presence of primitive restart, so we can't reliably
compute offsets for our buffer pointers after a batch flush. Thanks to HW
contexts, our transform feedback offsets are now saved, so we can just
keep using the ones from before the batch wrap.
Fixes piglit OpenGL 3.1/primitive-restart-xfb flush
Reviewed-by: Paul Berry <stereotype441@gmail.com>
NOTE: This is a candidate for the 9.1 branch.
(cherry picked from commit 62a18da341)
"ctx->DrawBuffer->Visual" might be invalid if (NewState &_NEW_BUFFERS) != 0.
v2: also fix:
- RGBA_INTEGER_MODE_EXT
- RGBA_FLOAT_MODE_ARB (also check API support)
- FRAMEBUFFER_SRGB_CAPABLE_EXT
NOTE: This is a candidate for stable branches.
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit b6475f9437)
In the mailing list discussion of "glsl/linker: fix varying packing
for non-flat integer varyings." (commit 7862bde), we concluded that
since the bug only applies to integral variables, it is safer to just
apply the bug fix to integer varyings. I forgot to make the change
before pushing the patch upstream. (Note: we aren't aware of any bugs
in commit 7862bde; it just seems wise to be on the safe side).
This patch makes the change. Assuming commit 7862bde gets
cherry-picked back to 9.1, this commit should be cherry-picked too.
NOTE: This is a candidate for the 9.1 release branch.
(cherry picked from commit 5306af2113)
When a varying is consumed by transform feedback, but is not used by
the fragment shader, assign_varying_locations() sets its interpolation
type to "flat" in order to ensure that lower_packed_varyings never has
to deal with non-flat integral varyings (the GLSL spec doesn't require
integral vertex outputs to be flat if they aren't consumed by the
fragment shader).
A similar situation will arise when geometry shader support is added,
since the GLSL spec only requires integral vertex shader outputs to be
flat when they are consumed by the fragment shader. This patch
modifies the linker to handle this situation too.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
(cherry picked from commit 32d2b2aa2c)
To minimize the variety of type conversions that lower_packed_varyings
needs to perform, it assumes that integral varyings are always
qualified as "flat". link_varyings.cpp takes care of ensuring that
this is the case (even in the circumstances where GLSL doesn't require
it).
This patch documents the assumption with an assertion, for ease in
future debugging.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
(cherry picked from commit 8687c40c2d)
Commit dfb57e7 (glsl: Fix error checking on "flat" keyword to match
GLSL ES 3.00, GLSL 1.50) relaxed the rules for integral varyings: they
only need to be declared as "flat" if they are a fragment shader
inputs. This allowed for the possibility of a vertex shader output
being a non-flat integer, provided that it was not matched to a
fragment shader input. A non-contrived situation where this might
arise is if a vertex shader generates some integral outputs which are
consumed by tranform feedback, but not by the fragment shader.
Unfortunately, lower_packed_varyings assumes that *all* integral
varyings are flat, regardless of whether they are consumed by the
fragment shader. As a result, attempting to create a non-flat
integral vertex output of a size that required packing (i.e. a size
other than ivec4 or uvec4) would cause an assertion failure in
lower_packed_varyings.
This patch prevents the assertion failure by forcing vertex shader
outputs to be "flat" whenever they are not consumed by the fragment
shader. This should have no effect on rendering since the "flat"
keyword only affects the behaviour of fragment shader inputs.
Fixes piglit test "spec/EXT_transform_feedback/nonflat-integral".
NOTE: This is a candidate for the 9.1 release branch.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
(cherry picked from commit 7862bde8af)
Reported-by: `per` in #intel-gfx
The size of the cache key varies, so store the actual size as well as
the key blob itself, rather than just assuming it's the same as the size
passed in.
NOTE: This is a candidate for stable branches.
V2: Don't leave silly holes in structure; use unsigned instead of GLuint.
V3: Fix missing case for `last` match.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
(cherry picked from commit c4629ad3f9)
Don't check if there's sampler support for stencil if we're not
going to actually blit/copy stencil values. Fixes the case where
we mistakenly said we can't support a blit of depth values from
S8Z24 to X8Z24.
Also, rename the is_stencil variable to dst_has_stencil to improve
readability.
NOTE: This is a candidate for the stable branches.
Reviewed-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
(cherry picked from commit de99b6d117)
ctx->Stencil.WriteMask is a statically sized array of 3 elements.
Checking it against 0 actually is a NULL check, and can never fail,
which meant that we always said stencil writes were enabled.
Use the new core Mesa derived state flag to fix this.
NOTE: This is a candidate for stable branches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
(cherry picked from commit 01bd29d681)
This patch consolidates duplicate code in the brw_depthbuffer and
gen7_depthbuffer state atoms. Previously, these state atoms contained
5 chunks of code for emitting the _3DSTATE_DEPTH_BUFFER packet (3 for
Gen4-6 and 2 for Gen7). Also a lot of logic for determining the
appropriate buffer setup was duplicated between the Gen4-6 and Gen7
functions.
This refactor splits the code into three separate functions:
brw_emit_depthbuffer(), which determines the appropriate buffer setup
in a mostly generation-independent way, brw_emit_depth_stencil_hiz(),
which emits the appropriate state packets for Gen4-6, and
gen7_emit_depth_stencil_hiz(), which emits the appropriate state
packets for Gen7.
Tested using Piglit on Gen5-7 (no regressions).
v2: Re-word some comments. Fix an assertion that incorrectly
prohibited packed depth/stencil formats on Gen6 (these are allowed
provided that HiZ is disabled).
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 41e4bccc75)
i965 needs to know whether stencil writes are enabled in several places,
and gets the test wrong sometimes. While we could create a function to
compute this, it seems generally useful enough to warrant a new piece of
derived state. Also, all the plumbing is already in place.
NOTE: This is a candidate for stable branches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
(cherry picked from commit 1e3235d36e)
Mesa constant-folds built-in functions by using a miniature GLSL
interpreter (see
ir_function_signature::constant_expression_evaluate_expression_list()).
This interpreter had a bug in its handling of array indexing, which
caused expressions like "m[i][j]" (where m is a matrix) to be handled
incorrectly. Specifically, it incorrectly treated j as indexing into
the whole matrix (rather than indexing just into the vector m[i]); as
a result the offset computed for m[i] was lost and m[i][j] was treated
as m[j][0].
Fixes piglit tests inverse-mat[234].{vert,frag}.
NOTE: This is a candidate for the 9.1 and 9.0 branches.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=57436
(cherry picked from commit 7d4f1e6467)
A fix for lower_jumps progress reporting, very much like similar in
c1e591eed.
NOTE: This is a candidate for stable branches.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit b2eee0869f)
I think this makes it much more obvious what's going on here.
NOTE: This is a candidate for the 9.1 branch.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 8edc7cbe64)
This is our first CSE on a regs_written() > 1 instruction, so it takes a
bit of extra fixup. Reduces the number of loads on kwin's Lanczos shader
from 12 to 2.
v2: Fix compiler warning (false positive on possibly-uninitialized variable)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61554
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v1)
NOTE: This is a candidate for the 9.1 branch.
(cherry picked from commit 9f43b84928)
Right now we don't have anything with regs_written() > 1 and !inst->mlen,
but that's about to change.
NOTE: This is a candidate for the 9.1 branch.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit bc0e1591f6)
This puts the rounding-up logic into the function itself instead of all
the callers having to manage it. Also drop an "unused" comment in gen4,
as the stride *is* used for texbos (and will be for uniforms soon).
NOTE: This is a candidate for the 9.1 branch.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 2f41a60145)
I'm going to want to change the math for gen7 using sampler LD
instructions in a way that gets CSE to occur like we'd hope.
NOTE: This is a candidate for the 9.1 branch.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 8c694dfe64)
We weren't inserting it into the list, so it did nothing. This line was
replaced by the MOV/MUL block above.
NOTE: This is a candidate for the 9.1 branch.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 59e858861c)
If the active uniform is an array, then the length of the uniform name should
include the three extra characters for the "[0]" suffix, which is required by
the GL 4.2 spec to be appended to the uniform name in glGetActiveUniform().
This avoids the situation where the output buffer does not have enough space
to hold the "[0]" suffix, resulting in an incomplete array specification like
"foobar[0".
NOTE: This is a candidate for the 9.1 branch.
Change-Id: I41e87ba347a7169eec8c575596cc3416adbe0728
Signed-off-by: Haixia Shi <hshi@chromium.org>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit bc0cc2944f)
Interpolation modes other than perspective-barycentric-pixel-center (and
their associated coefficients in the WM payload) only exist in Gen6 and
later.
Unfortunately, if a varying was declared as `centroid`, we would blindly
read the nonexistant values, and so produce all manner of bad behavior
-- texture swimming, snow, etc.
Fixes rendering in Counter-Strike Source and Team Fortress 2 on
Ironlake.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Jordan Justen <jordan.l.justen@intel.com>
(cherry picked from commit 79f786f936)
This is roughly a backport of Eric's commit 0967c362.
We avoided assigning a slot in the VUE map for gl_ClipVertex, but left
the bit set in outputs_written, producing horrible confusion further
down the pipe.
Mostly fixes rendering in source games, and probably in Freespace 2 SCP.
No Piglit regressions on Ironlake.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
V2: Mask out the bit, not its index. Strangely, the game still worked
with that wrong, but rendering of pretty much anything else was
completely trashed.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We don't support pre-2.6 kernels anyway - the install docs say 2.6.28
for DRI - and apparently this confuses ld.so's sorting when multiple
libGLs are installed. Just remove it.
Note: this is a candidate for the stable branches.
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
(cherry picked from commit 904b03824b)
There are too many cases were we end up with lockups.
Once we sort out the remaining issues on master, they
can be backported and hyperz can be re-enabled on 9.1
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes a bug introduced in commit 258453716f and
triggered whenever "rb" is NULL.
Fixes at least one cause bug #59445:
[SNB/IVB/HSW Bisected]Oglc draw-buffers2(advanced.blending.none) segfault
https://bugs.freedesktop.org/show_bug.cgi?id=59445
(Though segfaults are still possible in that test case, but they have been
present since before commit 258453716f which is what's being fixed here.)
Reviewed-by: Eric Anholt <eric@anholt.net>
[jordan.l.justen@intel.com: fixes Anomaly Warzone Earth crash at title screen]
Tested-by: Jordan Justen <jordan.l.justen@intel.com>
Since the case was missing bec4->get_scalar_type() would return bvec4,
but vec4->get_scalar_type() would return float.
NOTE: This is a candidate for stable branches.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
(cherry picked from commit c770faea0a)
Virtual address is used for PIPE_QUERY_SO* queries in
r600_emit_query_begin, but not in r600_emit_query_end.
This will trigger a GPU fault when one of those queries is
made and virtual address is enabled.
Note: this is a candidate for the 9.1 branch
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 92855bcc95)
Since half of ir_validate uses asserts() (the other using printf() then
abort()), there's not much use to calling it in a release build. Cuts
6.3% of the startup time of TF2.
NOTE: This is a candidate for the stable branches.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 712bac1f41)
NOTE: This is a candidate for the 9.1 branch.
Fixes piglit's texture-immutable-levels test.
Reported-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 12dc4be8a6)
Fixes random failures with piglit glsl-max-varyings.
NOTE: This is a candidate for the 9.1 branch.
Reviewed-by: Christian König <christian.koenig@amd.com>
(cherry picked from commit 032e5548b3)
Commit 33599433c7 began setting the texture swizzle mode to XYZ1 for
RED, RG, and RGB textures in order to force alpha to 1.0 in case we
actually stored the texture as RGBA.
This had a unforseen performance implication: the shader precompile
assumes that the texture swizzle mode will be XYZW for non-shadow
sampler types. By setting it to XYZ1, this means every shader used with
a RED, RG, or RGB texture has to be recompiled. This is a very common
case.
Unfortunately, there's no way to improve the precompile, since RGBA
textures still need XYZW, and there's no way to know by looking at
the shader source what texture formats might be used.
However, we only need to smash alpha to 1.0 if the texture's memory
format actually has alpha bits. If not, the sampler already returns 1.0
for us without any special swizzling. XRGB8888, for example, is a very
common case where this occurs.
This partially fixes a performance regression since commit 33599433c7.
More work is required to fully fix it in all cases. This at least helps
Warsow.
NOTE: This is a candidate for the 9.1 branch.
Reviewed-by: Carl Worth <cworth@cworth.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit d86efc075e)
If we're in some conditional or loop we must not return, or the code
after the condition is never executed.
(v2): And, we also can't just continue as nothing happened, since the
mask update code would later check if we actually have a mask, so we
need to remember that there was a return in main where we didn't exit
(to illustrate this, a ret in a if clause would cause a mask update
which is still ok as we're in a conditional, but after the endif the
mask update code would drop the mask hence bringing execution back to
pixels which should have their execution mask set to zero by the ret).
Thanks to Christoph Bumiller for figuring this out.
This fixes https://bugs.freedesktop.org/show_bug.cgi?id=62357.
Note: This is a candidate for the stable branches.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
(cherry picked from commit 5af7b45986)
Fast depth clears have the same depth/stencil alignment requirements
as other drawing operations. Therefore, we need to call
brw_workaround_depthstencil_alignment() from both the clear and
drawing paths.
Without this fix, we get image corruption if the following conditions
hold: (a) the first ever drawing operation to a depth miplevel (or the
first drawing operation after having used the texture for sampling) is
a clear, (b) the depth miplevel has a size that is eligible for fast
depth clears, and (c) the depth miplevel has an offset within the
miptree that isn't 8x8 aligned.
Fixes piglit "depthstencil-render-miplevels" tests with size 273.
NOTE: This is a candidate for stable branches
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit c5d5827951)
Untyped Atomic Operation messages are illegal for non-RAW formats. The
IVB hardware proceeds happily (after all, who cares what the format of the
surface is if you're doing untyped ops on it?), but later hardware
apparently doesn't. The simulator for gen7 does complain, though.
v2: Rebase against updates to previous patches. (by anholt)
NOTE: This is a candidate for the 9.1 branch.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 91df4d746b)
This is basically a copy and paste of gen7_create_constant_surface, but
with the parameters filled in to offer a simpler interface.
It will diverge shortly.
I didn't bother adding it to the vtable for now since shader time is only
exposed on Gen7+.
v2: Replace tabs in the new code (by anholt)
Add back dropped memset() and add a comment about HSW channel selects.
NOTE: This is a candidate for the 9.1 branch.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 125b34cffb)
Haswell's "Data Cache" data port is a single unit, but split into two
SFIDs to allow for more message types without adding more bits in the
message descriptor.
Untyped Atomic Operations are now message 0010 in the second data cache
data port, rather than 6 in the first.
v2: Use the #defines from the previous commit. (by anholt)
NOTE: This is a candidate for the 9.1 branch.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net> (v1)
(cherry picked from commit f27a220cad)
We were sparsely using some of these message types, but I'll just fill
them all in now. It will be used for fixing shader_time on HSW.
v2: Add missing MEDIA_BLOCK_READ.
NOTE: This is a candidate for the 9.1 branch.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit a2d08f170a)
Framebuffer blitting operation should be skipped if any of the
dimensions (width/height) of src/dst rect is zero.
V2: Move the dimension check after error checking in _mesa_BlitFramebuffer.
Fixes: fbblit(negative.nullblit.zeroSize) in Intel oglconform
https://bugs.freedesktop.org/show_bug.cgi?id=59495
Note: Candidate for all the stable branches.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
(cherry picked from commit d78dcdf103)
This is a squash-commit of the two commits listed below. The first
introduced a 'make check' failure, and the second fixed it.
mesa,gallium,egl,mapi: One definition of C99 inline/__func__ to rule them all.
We were in four already...
NOTE: Candidate for the stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 70fe7c6d3e)
And:
tests: Add $(top_srcdir)/include to AM_CPPFLAGS.
Fixes this build error with make check.
CC collision.o
In file included from ../../../../../src/mesa/main/hash_table.h:34:0,
from collision.c:31:
../../../../../src/mesa/main/compiler.h:51:53: fatal error: c99_compat.h: No such file or directory
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
(cherry picked from commit a6bb7a9495)
We were handling the the dependency workaround for the first written reg
of a send preceding the one we're fixing up, but didn't consider the other
regs. Thus if you had two sampler calls that got allocated to the same
set of regs, one might, rarely, ovewrite the other. This was occurring in
XBMC's GLSL shaders.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44567
NOTE: This is a candidate for the stable branches.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 4dc7e6dcbf)
The lowering process creates a new vgrf on gen7 that should be represented
in live interval analysis. As-is, it was getting a conflicting allocation
with gl_FragDepth in the dolphin emulator, producing broken rendering.
NOTE: This is a candidate for the 9.1 branch.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61317
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 1323772543)
We were allowing a compressed instruction to write a register that
contained the last use of a uniform pull constant (either UBO load or push
constant spillover), so it would get half its values smashed.
Since we need to see the actual instruction to decide this, move the
pre-gen6 pixel_x/y logic here, which should improve the performance of
register allocation since virtual_grf_interferes() is called more than
once per instruction.
NOTE: This is a candidate for the stable branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61317
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit f10f5e4980)
If the sampler object has been deleted on another context, an
alternative context may reference the old sampler. So ensure the sampler
object still exists.
Note: this is a candidate for the stable branch.
Signed-off-by: Alan Hourihane <alanh@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 5984a911f9)
This change specifically unbinds a sampler object from the texture unit
if it's bound to a unit. The spec calls for default object when deleting
sampler objects which are currently bound.
Note: this is a candidate for the stable branches
Signed-off-by: Alan Hourihane <alanh@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit cf0b4a30fc)
We advertise a max texture/surfaces size of 8K x 8K but the old values
for these limits didn't actually allow us to handle that surface size.
For 8K x 8K we'll have 16384 bins. Each bin needs at least one cmd_block
object which was 2192 bytes in size. Since 16384 * 2192 exceeded
LP_SCENE_MAX_SIZE we'd silently fail in lp_scene_new_data_block() and not
draw the complete scene.
By reducing CMD_BLOCK_MAX to 29 we get nice 512-byte cmd_blocks. And
by increasing LP_SCENE_MAX_SIZE to 9 MB we can allocate enough command
blocks for 8K x 8K, plus a few regular data blocks.
Fixes the (improved) piglit fbo-maxsize test.
Note: This is a candidate for the stable branches.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
(cherry picked from commit a31ebdffa0)
Should have been removed with e273ed37.
Note: This is a candidate for the 9.1 branch.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 523b07e320)
X11 is already checked conditionally below.
Fixes OSMesa-only configurations to not require X11.
Note: This is a candidate for the 9.1 branch.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 35189d768b)
This was hit on the glTexStorage2D() path.
Note: this is a candidate for the stable branches
Signed-off-by: Alan Hourihane <alanh@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 196443f3f5)
This fixes a crash when a display list is created in one context
but executed from a second one. The vbo_save_context::vertex_store
memeber will be NULL if we never created a display list with the
context. Just check for that before dereferencing the pointer.
Fixes http://bugzilla.redhat.com/show_bug.cgi?id=918661
Note: This is a candidate for the stable branches.
(cherry picked from commit c2665aacdd)
On cayman, 128bpp surfaces require non_disp ordering for hw
access to both linear and tiled surfaces. When we use the 3D
engine we can set the non_disp ordering on both the tiled and
linear sides (via CB or texture), but when we use the DMA
engine, we can only set the non_disp ordering on the tiled
side, so after a L2T operation with the DMA engine, the data
ends up in the wrong order on the tiled side.
v2: cayman/TN only
v3: fix comments
Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=60802
Note: this is a candidate for the 9.1 branch.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4409758a04)
scons/llvm.py defines inline globally to workaround issues with LLVM C
binding headers, so the only way to is to avoid
aggravating xkeycheck.h errors is to set _ALLOW_KEYWORD_MACROS.
This fixes MSVC 2012 build with LLVM.
Reviewed-by: Brian Paul <brianp@vmware.com>
In cases where the vertex element size is smaller than the vertex buffer
stride, the previous calculation could end up 1 too low. This would result
in the GPU using index 0 instead of the maximum index for those elements,
which would be visible as intermittent distorted triangles.
NOTE: This is a candidate for the 9.1 branch.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4dca602521)
The second digit was off by one, which meant we accidentally treated
GTn as GT(n-1). This also meant no support for GT1 at all.
NOTE: This is a candidate for stable branches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit b88f74d63d)
Even when we don't have LLVM since there's other C++ code
in the resulting DRI driver object.
Note: This is a candidate for the stable branches.
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit a99eb5c83f)
Any driver can implement this simple and efficient optimization.
Team Fortress 2 hits it always. The DISCARD_RANGE codepath is not even used
with TF2 anymore, so we avoid a ton of useless buffer copies.
Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
NOTE: This is a candidate for the 9.1 branch.
(cherry picked from commit 89e2898e9e)
Reviewed-by: Brian Paul <brianp@vmware.com>
v2: cosmetic changes based on Brian's review
Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
NOTE: This is a candidate for the 9.1 branch. (the next patch depends on it)
(cherry picked from commit 44f37261fc)
probably a typo
Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
NOTE: This is a candidate for the 9.1 branch.
(cherry picked from commit 9dd18f43a4)
This requirement was added by ARB_fragment_program
When the Steam overlay is enabled, this fixes:
* Menu corruption with the Puddle game
* The screen going black on Rochard when
the Steam overlay is accessed
NOTE: This is a candidate for the 9.0 and 9.1 branches.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 6f1538f8b4)
Fixes fdo bug 61299
NOTE: This is a candidate for the stable branches.
Signed-off-by: José Fonseca <jfonseca@vmware.com>
(cherry picked from commit efd8311a54)
Previously only the 32-bit X visual would match the 32-bit RGBA8888
configs. This resulted in every config with alpha getting the "magic"
visual whose alpha is used by the compositor. This also resulted in no
multisample visuals being advertised. How many ways could we lose?
This patch inverts the problem... now you can't get the visual with
alpha used by the compositor even if you want it. I think we need to
invent a new value for EGL_TRANSPARENT_TYPE that apps can use to get
this. I'm surprised that there isn't already a choice for
EGL_TRANSPARENT_ALPHA.
NOTE: This is a candidate for the 9.1 branch.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Tian Ye <yex.tian@intel.com>
Acked-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59783
(cherry picked from commit 68a147e9a9)
When you didn't have a texcoord array bound (or a non-1 current w
attrib), we were telling the fragment shader that it could just use "1"
instead of doing expensive pre-gen6 math to invert it. If you drew the
point with a non-1 W value, then you'd get the right size (since all the
vertex computations worked), but we'd mis-interpolate the coordinate
across the face.
Fixes the mesa pointsprite demo on GM45.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30232
Reviewed-and-tested-by: Ian Romanick <ian.d.romanick@intel.com>
Note: This is a candidate for the stable branches.
(cherry picked from commit 50a5d5dea0)
missing case GL_REQUIRED_TEXTURE_IMAGE_UNITS_OES is required
by OES_EGL_image_external extension.
Note: This is a candidate for the stable branches.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
(cherry picked from commit 331967c773)
The llvm pipeline handles regular filled triangle offsets, but it
doesn't handle offsets for triangles drawn in point or line mode.
Fixes failures found with new piglit polygon-mode-offset test.
Note: This is a candidate for the stable branches.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
(cherry picked from commit f93c580063)
There were several issues. We weren't handling different front/back
polygon fill modes. We weren't checking whether the offset applied to
fill mode vs. line mode vs. point mode.
Fixes problems found with the Visualization Toolkit (VTK) test suite.
Note: This is a candidate for the stable branches.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
(cherry picked from commit d6b8b116ee)
The old logic was kind of twisted, but seemed to work in practice.
Note: This is a candidate for the stable branches.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
(cherry picked from commit a2c105e31e)
When we destroy an ARB vp/fp whose ID was gen'd but not otherwise used we
get a pointer to the dummy/placeholder program. We can't destroy that one
so just skip it. This only failed during context tear-down because
glDeleteProgramsARB() was already aware of dummy programs.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=38086
Note: This is a candidate for the stable branches.
Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
(cherry picked from commit 8bb291b0f5)
We sometimes convert GL_QUAD_STRIP prims into GL_TRIANGLE_STRIP, but
that changes the results of the u_trim_pipe_prim() call. We need to
pass the original primitive type to the trim function.
Note that OpenGL's GL_x prim type values match Gallium's PIPE_PRIM_x values.
Fixes a failure in the new piglit degenerate-prims test.
Note: This is a candidate for the stable branches.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
(cherry picked from commit 8589cc41b3)
The recent change for GL core broke the older setup, which broke
gl_PointCoord on pre-gen6 (where gl_PointCoord is undefined if point
sprites are disabled). Fixes the new piglit GLES-2.0/glsl-fs-pointcoord
test.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=32429
Note: This is a candidate for the stable branches.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 92a204b493)
In a debug build this led to assertion failures, but on a non-debug
build the hardware would just reference the whole vec8 instead of the
same channel 8 times.
Fixes the new piglit glsl-1.40/uniform-buffer/fs-exp2.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=57121
Note: This is a candidate for the stable branches
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 7b0731d940)
Only compile tested, but should fix at least some piglit fbo-blending tests.
NOTE: This is a candidate for the stable branches.
Reviewed-by: Marek Olšák <maraeo@gmail.com>
(cherry picked from commit 73bf626713)
We could potentially do some CSE even when the dst types aren't the same
on gen6 where there is no implicit dst type conversion iirc, or in the
case of uniform pull constant loads where the dst type doesn't impact
what's stored. But it's not worth worrying about.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
NOTE: This is a candidate for the 9.1 branch.
(cherry picked from commit c2a6e529c3)
This should fix the register allocation explosion on the GLES 3.0 test
on gen6. It also gives us an instruction that will fit our CSE handling.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
NOTE: This is a candidate for the 9.1 branch.
(cherry picked from commit aebd3f46e3)
We were correctly relaying the smear from MOV's src, but if the MOV
didn't do a smear, we don't want to smash the smear value from the
instruction being propagated into. Prevents a regression in the
upcoming UBO change.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
NOTE: This is a candidate for the 9.1 branch.
(cherry picked from commit 49bdebad38)
Otherwise, the PBuffer's size was never set. This also initializes
the buffer size for windows, pixmaps, etc.
Fixes http://bugs.freedesktop.org/show_bug.cgi?id=61012
Note: This is a candidate for the stable branches.
(cherry picked from commit e2091f64cb)
We weren't mapping the PBO when using the bitmap cache (but we had
the PBO code for the non-cache path.)
Fixes http://bugs.freedesktop.org/show_bug.cgi?id=61026
Note: This is a candidate for the stable branches.
(cherry picked from commit 63c30d7e4f)
This fixes a regression from ab74fee5e1.
When we use the clip coordinate to compute the screen-space interpolation
factor, we need to first apply the divide-by-W step to the clip
coordinate.
Fixes http://bugs.freedesktop.org/show_bug.cgi?id=60938
Note: This is a candidate for the 9.1 branch.
(cherry picked from commit 5da967aff5)
We'd been ad-hoc inserting instructions in some SEND messages with no
knowledge of when it was required (so extra instructions), but not all SENDs
(so not often enough). This should do much better than that, though it's
still flow-control-ignorant.
v2: Use BRW_MAX_MRF instead of magic numbers.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58960
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
NOTE: Candidate for the stable branches.
(cherry picked from commit c37992c54d)
Several commits on master for the 9.1 branch had "NOTE" messages in a
slightly different format.
NOTE: This is a candidate for stable branches
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 674f9239b9)
Requires corresponding LLVM R600 backend fix to work correctly, but even
without that it doesn't hang anymore.
13 more little piglits.
Depends on LLVM: r175193, r175733
NOTE: This is a candidate for the 9.1 branch.
(cherry picked from commit 18272c9b1b)
The problem is that we mix bo handles and flinked names in the hash
table. Because kms type handles are not flinked they should not be
added to the hash table. If we do that we will sooner or later
get a situation where we will overwrite a correct entry because
the bo handle was the same as a flinked name.
Note: this is a candidate for the stable branches.
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d96d8ed910)
Regardless of what we put in the screen structure, all of the extensions
that compute_version_es2 checks are present and 3.0 will be exposed
anyway.
NOTE: This is a candidate for the 9.1 branch.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 7ae6864f0d)
So we don't emit it twice if we ever use the flag on
cayman.
Note: this is a candidate for the 9.1 branch.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8b5acad0e9)
PS_PARTIAL flushes seems to be required in certain
cases to prevent hangs, especially on r6xx.
Note: this is a candidate for the 9.1 branch.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7ebf83f109)
Commit 86d30dea3c broke building with older
automake versions with this error:
Makefile:769: *** Recursive variable am__v_YACC_ references itself (eventually). Stop.
This patch fixes it. Fix stolen from xorg-macros.
Signed-off-by: Lauri Kasanen <cand@gmx.com>
(cherry picked from commit 0a82828ad5)
Based on r600g commit 2b9659c9e6 .
Fixes crashes with 4 piglit tests which are now hitting these formats.
NOTE: This is a candidate for the 9.1 branch.
(cherry picked from commit f9adf79876)
It's the reciprocal of the register value.
Fixes piglit fragcoord_w and glsl-fs-fragcoord-zw-perspective.
NOTE: This is a candidate for the 9.1 branch.
(cherry picked from commit 954bc4ac34)
11 more little piglits.
NOTE: This is a candidate for the 9.1 branch.
Reviewed-by: Marek Olšák <maraeo@gmail.com>
(cherry picked from commit 95bced5929)
That means we can map and read multiple slices with one transfer_map call.
[ Cherry-picked from r600g commit 1aebb6911e ]
11 more little piglits on master, 1 more on the 9.1 branch (Marek's
glTex(Sub)Image improvements on master broke the other 10).
NOTE: This is a candidate for the 9.1 branch.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 72f4490b55)
[ Cherry-picked from r600g commit ef11ed61a0 ]
NOTE: This is a candidate for the 9.1 branch.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a84c4edeed)
[ Cherry-picked from r600g commit b278aba423 ]
NOTE: This is a candidate for the 9.1 branch.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c4faab63c4)
Assuming I understand EXT_texture_sRGB correctly.
NOTE: This is a candidate for the stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 6520a86c67)
The OMOD value was only being folded to one instruction in cases where
the MUL instruction was reading a value written by more than one
instruction.
NOTE: This is a candidate for the stable branches.
Reviewed-by: Marek Olšák <maraeo@gmail.com>
(cherry picked from commit 10bcc843f8)
Now you can convert assembly strings into a full struct radeon_compiler
object and use it to test individual compiler pases.
NOTE: This is a candidate for the stable branches.
Reviewed-by: Marek Olšák <maraeo@gmail.com>
(cherry picked from commit 5e1321ddf4)
This way make check can report whether or not the tests pass.
NOTE: This is a candidate for the stable branches.
Reviewed-by: Marek Olšák <maraeo@gmail.com>
(cherry picked from commit bcf2e157ca)
This will be used by the test suite in later commits.
NOTE: This is a candidate for the stable branches.
Reviewed-by: Marek Olšák <maraeo@gmail.com>
(cherry picked from commit 5355fc1e87)
These are all files that I authored, but forgot to add the license
headers.
NOTE: This is a candidate for the stable branches.
Signed-off-by: Tom Stellard <thomas.stellard@amd.com>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
(cherry picked from commit 27d140b960)
GLX_INTEL_swap_event is broken on the server side, where it's
currently unconditionally enabled. This completely breaks
systems running on drivers which don't support that extension.
There's no way to test for its presence on this side, so instead
of disabling it uncondtionally, just disable it for drivers
which are known to not support it. It makes sense because
most drivers do support it right now.
We'll be able to remove this once Xserver properly advertises
GLX_INTEL_swap_event.
Note: This is a candidate for stable branch branches.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=60052
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Tested-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 076403c30d)
A single element in a GLX reply is contained in the header itself.
The number of elements is denoted in the "n" field of the reply.
If "n" is 1, the length of additional data is 0.
The XXX_data_length() function of xcb does not return the length of
the (optional, n>1) data but the number of elements.
Fixes http://bugs.freedesktop.org/show_bug.cgi?id=59876
Note: This is a candidate for the stable branches.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 5876a5dbc0)
In 2 of our checks, we were missing BREAK and CONTINUE.
NOTE: Candidate for the stable branches.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit bf91f0b039)
Detect a duplicate Shader type as and error instead of silently allowing
it, restrict to ES2 API.
v2: Tapani Pälli <tapani.palli@intel.com>
- make the check run time instead of compile time
v3: chadv
- Quote spec on which error to generate.
Signed-off-by: bma <Bo.Ma@windriver.com>
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-and-tested-by: Chad Versace <chad.versace@linux.intel.com>
(cherry picked from commit ce3dfa19ab)
The hardware just doesn't support it. I suspect this was a regression from
the move to fixed MESA_FORMATs for compressed textures and that previously we
were storing uncompressed for this or something.
Fixes GPU hangs in piglit "texwrap GL_EXT_texture_sRGB-s3tc bordercolor
swizzled" on my GM965.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit ddc2b453d0)
_mesa_delete_renderbuffer does not call the driver-specific
renderbuffer delete function, so the blorp code was leaking the
Intel-specific bits, including some GEM objects.
Call the renderbuffer's ->Delete() method instead, which does the
right thing.
Fixes Unity rapidly sending the machine into the arms of the OOM-killer
Note: This is a candidate for the 9.1 branch.
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit dd599188d2)
The GL_ARB_texture_rg spec says that we need to support both texturing
and rendering for the GL_RED and GL_RG formats. So move the format
check up into the rendertarget_mapping[] list. Also, add
PIPE_FORMAT_R8_UNORM to the list of formats required.
Note: This is a candidate for the stable branches.
Reviewed-by: Marek Olšák <maraeo@gmail.com>
(cherry picked from commit 4be5a06752)
In GLSL, sampler indices are allocated contiguously from 0. But in the
case of ARB_fragment_program (and possibly fixed function), an app that
uses texture 0 and 2 will use sampler indices 0 and 2, so we were only
allocating space for samplers 0 and 1 and setting up sampler 0. We
would read garbage for sampler 2, resulting in flickering textures and
an angry simulator.
Fixes bad rendering in 0 A.D. and ETQW. This was fixed for pre-gen7 by
28f4be9eb9
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=25201
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58680
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
NOTE: This is a candidate for stable branches.
(cherry picked from commit 5bb05c6e6d)
Otherwise, we fail to correctly handle GL_PRIMITIVE_RESTART_FIXED_INDEX.
Fixes gles3conform's primitive_restart_mode test.
NOTE: This is a candidate for the 9.1 branch.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 8cabe26f5d)
Tested with softpipe only exposing RGBA formats.
NOTE: This is a candidate for the stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit cb6470775c)
The Mesa format can be RGBA8888_REV, the format/type can be
GL_RGBA/GL_UNSIGNED_BYTE, but the actual texture internal format can be
LUMINANCE_ALPHA, INTENSITY, etc. Therefore we should look at the base
internal format as well.
NOTE: This is a candidate for the stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit c8379204ab)
_mesa_base_tex_format doesn't accept GL_BGR and GL_ABGR_EXT, etc.
v2: add a (now hopefully complete) helper function to deal with this
NOTE: This is a candidate for the stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 09a99867ab)
Older hardware cannot do ARB_texture_rgb10_a2ui, and the translation
code for OES_compressed_ETC1_RGB8_texture was never implemented in the
i915 driver.
NOTE: This is a candidate for all stable branches.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 0e2f26d5ea)
This optimized filter (when using repeat wrap modes,
linear min/mag/mip filters, pot textures) only applies to 2d textures,
but nothing prevented it from being used for other textures (likely
leading to very bogus sample results).
Note: This is a candidate for the 9.0 branch.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
(cherry picked from commit 66b6d51214)
At eglSwapBuffer time, we blindly assume we have a back buffer, but the
back buffer only gets allocated when somebody tries to render something.
NOTE: This is a candidate for the 9.0 and 9.1 branches.
https://bugs.freedesktop.org/show_bug.cgi?id=60086
(cherry picked from commit 1fe007399c)
We weren't emitting the SVGA_RS_OUTPUTGAMMA state so sRGB rendering
didn't work properly.
Fixes piglit's framebuffer-srgb test.
Note: This is a candidate for the stable branches.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
(cherry picked from commit ff60509157)
If we call gl[Copy]TexImage2D() with a generic compression format
(e.g. intFormat=GL_COMPRESSED_RGBA) we can't choose a DXT format if
we don't have the external DXT compression library.
We weren't actually enforcing this before since the
pipe_screen::is_format_supported(DXT) query has no dependency on
the DXT compression library.
Now if we're given a generic compressed format and we can't do DXT
compression we'll fall back to a non-compressed format.
v2: use util_format_is_s3tc() function and add more comments about
the allow_dxt parameter.
Note: This is a candidate for the stable branches.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
(cherry picked from commit 4df42890c5)
When glCompressedTexImage is called the internalFormat is a specific
format for the incoming image and the the hardware format should be
the same (since we never do format transcoding). So use the simpler
_mesa_glenum_to_compressed_format() function. This change is also
needed for the next patch.
Note: This is a candidate for the stable branches.
(cherry picked from commit 478056b81a)
GLX uses mapi/glapi/libglapi.la, which is only built for OpenGL.
If the user specified --enable-xlib-glx --disable-opengl, error out, as these
cannot be both observed at the same time. If the user just specified
--disable-opengl but not --disable-glx, print a warning and disable GLX as
well.
NOTE: This is a candidate for the stable branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59364
Tested-by: Tom Stellard <thomas.stellard@amd.com>
(cherry picked from commit 3b888f534c)
Check that the return value from xcb_dri2_swap_buffers_reply is
non-NULL before accessing the struct members.
Note: This is a candidate for the 9.0 branch.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 67e7263e45)
See previous commit for more info.
Note: This is a candidate for the 9.0 branch.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
(cherry picked from commit 2180f32972)
The swrast fragment program interpreter has trouble computing the
right texture LOD because it doesn't have easy access to input
derivatives. This causes the GLSL-based meta generate mipmap code
to fetch texels from the wrong mipmap level.
One possible fix would be to set the GL_TEXTURE_MIN/MAX_LOD parameters
to limit sampling from the right level. But let's just use the
_mesa_generate_mipmap() fallback since it's a lot faster than using
the fragment shader interpreter.
Fixes http://bugs.freedesktop.org/show_bug.cgi?id=54240
Note: This is a candidate for the 9.0 branch.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
(cherry picked from commit 89551ae04f)
In the GLSL 1.30 spec, section 4.3.6 ("Outputs") says:
"If a vertex output is a signed or unsigned integer or integer
vector, then it must be qualified with the interpolation qualifier
flat."
The GLSL ES 3.00 spec further clarifies, in section 4.3.6 ("Output
Variables"):
"Vertex shader outputs that are, *or contain*, signed or unsigned
integers or integer vectors must be qualified with the
interpolation qualifier flat."
(Emphasis mine.)
The language in the GLSL ES 3.00 spec is clearly correct and should be
applied to all shading language versions, since varyings that contain
ints can't be interpolated, regardless of which shading language
version is in use.
(Note that in GLSL 1.50 the restriction is changed to apply to
fragment shader inputs rather than vertex shader outputs, to
accommodate the fact that in the presence of geometry shaders, vertex
shader outputs are not necessarily interpolated. That will be
addressed by a future patch).
NOTE: This is a candidate for stable branches.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit 93c913485e)
From GLSL ES 3.00 section 4.5.4 ("Default Precision Qualifiers"):
"The precision statement
precision precision-qualifier type;
can be used to establish a default precision qualifier. The type
field can be either int or float or any of the sampler types, and
the precision-qualifier can be lowp, mediump, or highp."
GLSL ES 1.00 has similar language. GLSL 1.30 doesn't allow precision
qualifiers on sampler types, but this seems like an oversight (since
the intention of including these in GLSL 1.30 is to allow
compatibility with ES shaders).
Previously, Mesa followed GLSL 1.30 and only allowed default precision
qualifiers to be set for float and int. This patch makes it follow
GLSL ES rules in all cases.
Fixes Piglit tests default-precision-sampler.{vert,frag}.
Partially addresses https://bugs.freedesktop.org/show_bug.cgi?id=60737.
NOTE: This is a candidate for stable branches.
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit d5948f2f5e)
With the llvm patches, fixing 14 piglit tests in total.
v2: increase the const limit
v3: document the const limit
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit 8c80894fb3)
This reverts commit 2906e2034c.
Fixes a regression in the glean depthStencil test.
Reverting this does not affect any tests in es3conform, so a more recent
patch must have also fixed the failure this one was intended to fix.
Reported-by: lu hua <huax.lu@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59494
(cherry picked from commit a527b2192e)
Seems that alpha test being enabled confuse the GPU on the order in
which it should perform the Z testing. So force the order programmed
throught db shader control.
v2: Only force z order when alpha test is enabled
v3: Update db shader when binding new dsa + spelling fix
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
(cherry picked from commit 974b482aca)
In OpenGL 4.3, new language was added that would require
this check. But, if this check results in broken applications
then perhaps it will be reversed.
For now, remove this check and re-evaluate when
desktop GL 4.3 is closer.
NOTE: This is a candidate for the 9.1 branch.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
The third argument of AC_ARG_WITH is evaluated for any provided value,
not only on --with-, so it must not force-enable the feature
Also, setting $with_llvm_shared_libs in the opencl check was overriding
the user switch
https://bugs.freedesktop.org/show_bug.cgi?id=59851
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
(cherry picked from commit 1e857130f0)
The blit must be aligned on 8 horizontal block.
v2: no need to align the reminder
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
(cherry picked from commit 323a448825)
If the same context try to flink and open the object, use the
same bo struct instead of opening a new gem handle for the object.
This way we avoid avoid having 2 different handle pointing to the
same kernel object which can latter lead to trouble with virtual
address.
Fix:
https://bugs.freedesktop.org/show_bug.cgi?id=60200
Signed-off-by: Martin Andersson <g02maran@gmail.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
(cherry picked from commit a37835c8ed)
Previously we were relying on CFLAGS_FOR_BUILD to be the same as CFLAGS
when not cross compiling, but this assumption didn't take into
consideration 32-bit builds on 64-bit systems. More generally, not
honoring CFLAGS is bad.
Automake is evidently too stupid to accept
if CROSS_COMPILING
CC = @CC_FOR_BUILD@
...
else
CC = @CC@
endif
without warning that CC has been already defined. The warnings are
harmless, but I'd prefer to avoid future reports about them, so define
proxy variables, which are assigned inside the conditional and then
unconditionally assigned to CC et al.
NOTE: This is a candidate for the 9.1 branch.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59737
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=60038
(cherry picked from commit 2db1f73849)
Make sure one can identify virtual address failure from allocation
failure.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
(cherry picked from commit 9a47684564)
The exa core will already set the pointer to NULL prior calling
the callback function. So don't bail out in the callback if it's
already NULL.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
(cherry picked from commit 3310acdf47)
Since transform feedback needs to be able to access individual fields
of varying structs, we can no longer match up the arguments to
glTransformFeedbackVaryings() with variables in the vertex shader.
Instead, we build up a hashtable which records information about each
possible name that is a candidate for transform feedback, and then
match up the arguments to glTransformFeedbackVaryings() with the
contents of that hashtable.
Populating the hashtable uses the program_resource_visitor
infrastructure, so the logic is shared with how we handle uniforms.
NOTE: This is a candidate for the 9.1 branch.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 99b78337e3)
Previously, transform feedback varyings were parsed in an ad-hoc
fashion that wasn't compatible with structs (or array of structs).
This patch makes it use parse_program_resource_name(), which correctly
handles both.
Note that parse_program_resource_name()'s technique for handling
mal-formed input strings is to simply let them through and rely on the
fact that a future name lookup will fail. Because of this,
tfeedback_decl::init() no longer needs to return a boolean error
code--it always succeeds, and if the input was mal-formed the error
will be detected later.
NOTE: This is a candidate for the 9.1 branch.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 53febac02c)
There's actually nothing uniform-specific in uniform_field_visitor.
It is potentially useful for all kinds of program resources (in
particular, future patches will use it for transform feedback
varyings).
This patch renames it to program_resource_visitor, and clarifies
several comments, to reflect the fact that it is useful for more than
just uniforms.
NOTE: This is a candidate for the 9.1 branch.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit b4db34cc4c)
The parsing logic is moved to a new function in the GLSL module,
parse_program_resource_name(). This name was chosen because it should
eventually be useful for handling everything that OpenGL 4.3 calls
"program resources" (e.g. uniforms, vertex inputs, fragment outputs,
and transform feedback varyings).
Future patches will make use of this function for linking transform
feedback varyings.
NOTE: This is a candidate for the 9.1 branch.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit b92900d26a)
Now that we have support for overriding alpha to 1.0, we can handle
blitting between these formats in either direction.
For now, we only support two XRGB formats: MESA_FORMAT_XRGB8888 and
MESA_FORMAT_RGBX8888_REV. Most places only appear to worry about the
former, so ignore the latter for now. We can always add it later.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Martin Steigerwald <martin@lichtvoll.de>
(cherry picked from commit 7d467f3c15)
Currently, Blorp requires the source and destination formats to be
equal. However, we'd really like to be able to blit between XRGB and
ARGB formats; our BLT engine paths have supported this for a long time.
For ARGB -> XRGB, nothing needs to occur: the missing alpha is already
interpreted as 1.0. For XRGB -> ARGB, we need to smash the alpha
channel to 1.0 when writing the destination colors. This is fairly
straightforward with blending.
For now, this code is never used, as the source and destination formats
still must be equal. The next patch will relax that restriction.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Martin Steigerwald <martin@lichtvoll.de>
(cherry picked from commit c0554141a9)
The BLT engine has many limitations. Currently, it can only blit
X-tiled buffers (since we don't have a kernel API to whack the BLT
tiling mode register), which means all depth/stencil operations get
punted to meta code, which can be very CPU-intensive.
Even if we used the BLT engine, it can't blit between buffers with
different tiling modes, such as an X-tiled non-MSAA ARGB8888 texture
and a Y-tiled CMS ARGB8888 renderbuffer. This is a fundamental
limitation, and the only way around that is to use BLORP.
Previously, BLORP only handled BlitFramebuffer. This patch adds an
additional frontend for doing CopyTexSubImage. It also makes it the
default. This is partly to increase testing and avoid hiding bugs,
and partly because the BLORP path can already handle more cases. With
trivial extensions, it should be able to handle everything the BLT can.
This helps PlaneShift massively, which tries to CopyTexSubImage2D
between depth buffers whenever a player casts a spell. Since these
are Y-tiled, we hit meta and software ReadPixels paths, eating 99% CPU
while delivering ~1 FPS. This is particularly bad in an MMO setting
because people cast spells all the time.
It also helps Xonotic in 4X MSAA mode. At default power management
settings, I measured a 6.35138% +/- 0.672548% performance boost (n=5).
(This data is from v1 of the patch.)
No Piglit regressions on Ivybridge (v3) or Sandybridge (v2).
v2: Create a fake intel_renderbuffer to wrap the destination texture
image and then reuse do_blorp_blit rather than reimplementing most
of it. Remove unnecessary clipping code and conditional rendering
check.
v3: Reuse formats_match() to centralize checks; delete temporary
renderbuffers. Reorganize the code.
v4: Actually copy stencil when dealing with separate stencil buffers but
packed depth/stencil formats. Tested by a new Piglit test.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Paul Berry <stereotype441@gmail.com> [v4]
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> [v3]
Reviewed-and-tested-by: Carl Worth <cworth@cworth.org> [v2]
Tested-by: Martin Steigerwald <martin@lichtvoll.de> [v3]
(cherry picked from commit 0b3bebbaac)
Ivybridge doesn't appear to have the same errata as Sandybridge; no
corruption was observed by setting it to more than the minimal correct
value. It's possible that we were simply lucky, since the URB entries
are 1024-bit on Ivybridge vs. 512-bit Sandybridge. Or perhaps the
underlying hardware issue is fixed.
Either way, we may as well program the minimum value since it's now
readily available, likely to be more efficient, and possibly more
correct.
v2: Use GEN7_SBE_* defines rather than GEN6_SF_*. (A copy and paste
mistake.) They're the same, but using the right names is better.
NOTE: This is a candidate for all stable branches.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 44aa2e15f6)
(This commit message was primarily written by Paul Berry, who explained
what's going on far better than I would have.)
Previous to this patch, we thought that the only restrictions on
3DSTATE_SF's URB read length were (a) it needs to be large enough to
read all the VUE data that the SF needs, and (b) it can't be so large
that it tries to read VUE data that doesn't exist. Since the VUE map
already tells us how much VUE data exists, we didn't bother worrying
about restriction (a); we just did the easy thing and programmed the
read length to satisfy restriction (b).
However, we didn't notice this erratum in the hardware docs: "[errata]
Corruption/Hang possible if length programmed larger than recommended".
Judging by the context surrounding this erratum, it's pretty clear that
it means "URB read length must be exactly the size necessary to read all
the VUE data that the SF needs, and no larger". Which means that we
can't program the read length based on restriction (b)--we have to
program it based on restriction (a).
The URB read size needs to precisely match the amount of data that the
SF consumes; it doesn't work to simply base it on the size of the VUE.
Thankfully, the PRM contains the precise formula the hardware expects.
Fixes random UI corruption in Steam's "Big Picture Mode", random terrain
corruption in PlaneShift, and Piglit's fbo-5-varyings test.
NOTE: This is a candidate for all stable branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56920
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=60172
Tested-by: Jordan Justen <jordan.l.justen@intel.com> (v1/Piglit)
Tested-by: Martin Steigerwald <martin@lichtvoll.de> (PlaneShift)
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 09fbc29828)
The maximum SF source attribute is necessary to compute the Vertex URB
read length properly, which will be done in the next commit.
NOTE: This is a candidate for all stable branches.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Tested-by: Martin Steigerwald <martin@lichtvoll.de>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 5e9bc7bd12)
The next patch will benefit from easy access to the source attribute
number and whether or not we're swizzling. It doesn't want the final
attr_override DWord form, however.
NOTE: This is a candidate for all stable branches.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Tested-by: Martin Steigerwald <martin@lichtvoll.de>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit b3efc5bea8)
The maximum number of URB entries come from the 3DSTATE_URB_VS and
3DSTATE_URB_GS state packet documentation; the thread count information
comes from the 3DSTATE_VS and 3DSTATE_PS state packet documentation.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
(cherry picked from commit 9add4e8038)
In the documentation for BindBufferRange, OpenGL specs from 3.0
through 4.1 contain this language:
"The error INVALID_VALUE is generated if size is less than or
equal to zero or if offset + size is greater than the value of
BUFFER_SIZE."
This text was dropped from OpenGL 4.2, and it does not appear in the
GLES 3.0 spec.
Presumably the reason for the change is because come clients change
the size of the buffer after calling BindBufferRange. We don't want
to generate an error at the time of the BindBufferRange call just
because the old size of the buffer was too small, when the buffer is
about to be resized.
Since this is a deliberate relaxation of error conditions in order to
allow clients to work, it seems sensible to apply it to all versions
of GL, not just GL 4.2 and above.
(Note that there is no danger of this change allowing a client to
access data beyond the end of a buffer. We already have code to
ensure that that doesn't happen in the case where the client shrinks
the buffer after calling BindBufferRange).
Eliminates a spurious error message in the gles3 conformance test
"transform_feedback_offset_size".
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 04f0d6cc22)
This matches the behavior of the Windows driver, but a bspec reference
should would be nice.
NOTE: This is a candidate for the 9.0 and 9.1 branches.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit f29ab4ece5)
Should have been done in d9948e49 but I missed it because
MAX_VARYING_FLOATS doesn't appear in the ES 3 spec, but is the same
value as MAX_VARYING_COMPONENTS.
NOTE: Candidate for the 9.1 branch
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Also, add assertions to stress that render targets don't support scaled
formats.
20 more little piglits.
(cherry picked from commit 46dd16bca8b4526e46badc9cb1d7c058a8e6173e)
Append the overloaded vector type used for passing in the addressing
parameters.
Without this, LLVM uses the same function signature for all those types,
which cannot work.
Fixes problems e.g. with FlightGear and Red Eclipse.
(cherry picked from commit 1b3afea30de757815555d9eb1d6e72e2586d6a0c)
Was using the pixel size instead of the number of block for the slice
tile max computation which resulted in dma writing at wrong address.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
That should work in all cases.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Note: this is a candidate for the 9.1 branch.
(cherry picked from commit af0af75881)
Was broken since commit bf469f4edc
('gallium: add void *user_buffer in pipe_index_buffer').
Fixes 11 piglit tests and lots of missing geometry e.g. in TORCS.
NOTE: This is a candidate for the 9.1 branch.
(cherry picked from commit a8a5055f2d)
The hardware can't do it, and these were causing warnings in some piglit tests.
NOTE: This is a candidate for the 9.1 branch.
(cherry picked from commit 6455d40b7e)
In particular, the LOD bias and depth comparison values are packed before the
'normal' texture coordinates, and the array slice and LOD values are appended.
NOTE: This is a candidate for the 9.1 branch.
(cherry picked from commit 120efeef8b)
Fix up intrinsic names, and bitcast texture address parameters to integers.
NOTE: This is a candidate for the 9.1 branch.
(cherry picked from commit e5fb7347a7)
glRasterPos doesn't exist in the core profile.
NOTE: This is a candidate for the stable branches (9.0 and 9.1).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit cc5fdaf2dc)
This along with the latest drm-fixes branch should help with bad performance
of MSAA. Remember: Nx MSAA can't be more than N times slower (where N=2,4,6).
Anyway, I recommend at least 512 MB of VRAM for Full HD 6x MSAA.
NOTE: This is a candidate for the 9.1 branch.
(cherry picked from commit a06f03d795)
We are now seing cs that can go over the vram+gtt size to avoid
failing flush early cs that goes over 70% (gtt+vram) usage. 70%
is use to allow some fragmentation.
The idea is to compute a gross estimate of memory requirement of
each draw call. After each draw call, memory will be precisely
accounted. So the uncertainty is only on the current draw call.
In practice this gave very good estimate (+/- 10% of the target
memory limit).
v2: Remove left over from testing version, remove useless NULL
checking. Improve commit message.
v3: Add comment to code on memory accounting precision
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
I did not list the *_get_program_binary extensions since they're not
useful to anyone with their current implementation (that supports 0
binary formats).
Old kernel do not have dma support, patch pushed were missing some
of the check needed to not use dma.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Only drivers supporting DRI2 version >=4 support GLX_INTEL_swap_event.
So lets mark it as such otherwise applications which use this extension
(i.e. everything based on Clutter, e.g. gnome-shell) break horribly on
drivers supporting DRI2 versions only up to 3.
Note: This is a candidate for the 9.0 branch.
Reviewed-by: Brian Paul <brianp@vmware.com>
Get rid of special handling for reserved regs.
Use one intrinsic for all kinds of interpolation.
v2[Vincent Lejeune]: Rebased against current master
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
r600_bytecode::ar_chan stores the register channel for the value that
will be loaded into the AR register.
At the moment, this field is only used by the LLVM backend. The default
backend always sets ar_chan = 0.
We keep track of ring emission order in a stack, whenever we need to
flush we empty the stack in a fifo order. There is few helpers function
for bo mapping and other ring activities that will make sure that
the ring stack is properly flush and submitted.
v2: fix st flush path, and other flush path to properly flush all
rings if necessary
v3: - improve name of ring helpers
- make sure that each time a cs is gona be written it endup at
top of the stack to avoid any issue such as :
STACK[0] = dma (withbo A,B)
STACK[1] = gfx (withbo C,D)
Now if code try to emit a dma command relative to bo C or D
it will start writting cmd stream into the cs and once it
reach the point where it adds relocation it will flush.
At that point the cs will have cmd that don't have proper
relocation into the relocation buffer and kernel will just
refuse to run.
v4: - Drop the stack idea as it turn out there is no way to use it
or benefit from it. Any time the driver start command on other
ring, it always need to flush the previous ring. So make code
simpler by not using a stack.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Add ring support, you can create a cs for each ring. DMA ring is
bit special regarding relocation as you must emit as much relocation
as there is use of the buffer.
v2: - Improved comment on relocation changes
- Use a single thread to queue cs submittion this simplify driver
code while not impacting performances. Rational for this is that
you have to wait for all previous submission to have completed
so there was never a case while we could have 2 different thread
submitting a command stream at the same time. This code just
consolidate submission into one single thread per winsys.
v3: - Do not use semaphore for empty queue signaling, instead use
cond var. This is because it's tricky to maintain an even number
of call to semaphore wait and semaphore signal (the number of
cs in the stack would for instance make that number vary).
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Make it obvious what "unit" this is (no change in functionality).
draw still uses "unit" in places where it changes the shader by adding
texture sampling itself - it seems like this can't work with shaders
using dx10-style sample opcodes (can't mix gl-style and dx10-style
sample instructions in a shader).
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Split the sampler interface to use separate sampler and texture (sampler_view)
state. This is needed to support dx10-style sampling instructions.
This is not quite complete since both draw/llvmpipe don't really track
textures/samplers independently yet, as well as the gallivm code not quite
using the right sampler or texture index respectively (but it should work
for the sampling codes used by opengl).
We are however losing some optimizations in the process, apply_max_lod will
no longer work, and we potentially could end up with more (unnecessary)
recompiles (if switching textures with/without mipmaps only so it shouldn't
be too bad).
v2: don't use different callback structs for sampler/sampler view functions
(which just complicates things), fix up sampling code to actually use the
right texture or sampler index, and similar for llvmpipe/draw actually
distinguish between samplers and sampler views.
v3: fix more of PIPE_MAX_SAMPLER / PIPE_MAX_SHADER_SAMPLER_VIEWS mismatches
(both in draw and llvmpipe), based on feedback from José get rid of unneeded
static sampler derived state.(which also fixes the only 2 piglit regressions
due to a forgotten assignment), fix comments based on Brian's feedback.
v4: remove some accidental unrelated whitespace changes
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
npix_x/y/z is wrong with NPOT textures, since it's always aligned to POT
if the level is non-zero, so we can't use that.
This fixes piglit/spec/EXT_texture_shared_exponent/fbo-generatemipmap-formats.
Fixes a crash when the Redway3D Turbine demo exits. We've made this
change in other places in the past. The root issue is texture objects
are being shared by multiple contexts and sampler views get shared too.
Sampler views have a context pointer and if that context gets deleted
we may try to reference that context when finally deleting the sampler
view.
pipe_sampler_view_release() avoids this problem because it takes
an explicit context.
Reviewed-by: Zack Rusin <zackr@vmware.com>
Check the return value of calls to u_upload_alloc() and
u_upload_data() and return early if needed.
Since we don't have a way to propagate errors all the way up to
Mesa through pipe_context::draw_vbo(), call debug_warn_once() so
the user might have some clue about OOM errors.
Note: This is a candidate for the 9.0 branch.
We weren't properly checking the return value of these calls (and
calls to u_upload_data()) to detect OOM errors.
Note: This is a candidate for the 9.0 branch.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Some callers of this function were checking the 'ptr' result to see if
the function failed. But the correct way is to check the regular
return value for PIPE_ERROR_x. Now we initialize all the returned
values at the top of the function in case we do hit an error (like OOM).
Callers are more likely to detect OOM conditions now. But there
are some callers which don't do any error checking...
Note: This is a candidate for the 9.0 branch.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
That is, evaluate constant expressions for the following functions:
packSnorm4x8, unpackSnorm4x8
packUnorm4x8, unpackUnorm4x8
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
For each function {pack,unpack}{Snorm,Unorm}4x8, add a corresponding
opcode to enum ir_expression_operation. Validate the new opcodes in
ir_validate.cpp.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
We were using the NEED_RADEON_GALLIUM conditional to decide whether or not
to build llvm_wrapper.cpp, which is required for using the LLVM backend.
llvm_wrapper.cpp needs to be linked against the LLVM IPO libary
and this library is only added to LLVM_LIBS if either opencl or the
r600-llvm-compiler is enabled.
The NEED_RADEON_GALLIUM conditional is set to true when enabling the
radeonsi driver, so if the radeonsi and r600 drivers are enabled without
also enabling opencl or r600-llvm-compiler, llvm_wrapper.cpp will be
built, but the IPO library won't be added to LLVM_LIBS. This was
causing unresolved symbol errors when buiding with this configuration.
https://bugs.freedesktop.org/show_bug.cgi?id=59831
Tested-by: Alex Deucher <alexander.deucher@amd.com>
Dereffing all the values in the two callers was just pointless, and
the function isn't inlined so there was actual code impact.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The core Mesa code has just one more case than this (GL_BITMAP), so I
don't see any cause to special-case it.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This was added in b93684f5f3, but there's
no need for it -- get_size has to succeed, and it has an assert for us
in debug builds.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
For our current types, the required alignment is actually just 1 byte.
When we get doubles, we have to worry (those have to be aligned to the
natural size), but we don't have doubles yet and they'll just be a
special case.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2: A previous patch contained a spurious hunk that removed an
assignment to ir_variable::uniform_block. That hunk was moved to this
patch. Suggested by Carl Worth.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
glGetActiveUniform is not supposed to report block members that are not
active even if they are included in the layout of the block. The block
layout is determined from the GLSL_TYPE_INTERFACE that defines the
block, so eliminating the ir_variables that correspond to the individual
fields is safe.
Fixes gles3conform test
uniform_buffer_object_getuniformindices_for_for_nonexistent_or_not_active_uniform_names.
This also fixes the assertion failures (added in the previous commit) in
gles3conform uniform_buffer_object_index_of_not_active_block,
uniform_buffer_object_inherit_and_override_layouts, and
uniform_buffer_object_repeat_global_scope_layouts.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Use the function added in the previous commit.
This temporarily causes gles3conform
uniform_buffer_object_index_of_not_active_block,
uniform_buffer_object_inherit_and_override_layouts, and
uniform_buffer_object_repeat_global_scope_layouts to assertion fail.
This is fixed in the next commit.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Calculate all of the block member offsets, the IndexNames, and
everything else to do with every UBO.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Pretty much all of the compile-time, per-compilation unit block data is
about to get the axe.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
glGetUniformIndices requires that the block instance index not be
present in the name of queried uniforms. However,
gl_uniform_buffer_variable::Name will include the instance index. The
IndexName field is added to handle this difference.
Note that currently IndexName will always point to the same string as
Name. This will change soon.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Carl Worth <cworth@cworth.org>
Pretty much all of the compile-time, per-compilation unit block data is
about to get the axe.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This flavor takes a type and a base name. It will be used to handle
cases where the block name (instead of the instance name) is used for an
interface block.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Carl Worth <cworth@cworth.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2: Inspite of the spell checker, spell recurse correctly. Suggested by
Carl Worth.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Eventually the gl_uniform_block information won't be calculated until
linking. Block names need to be checked for name clashes during
compiling, so we have to track it differently.
v2: Update the commit message. Suggested by Carl Worth.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Not used yet, but the UBO layout visitor will use this.
v2: Remove a spruious hunk. This is moved to the patch "glsl: Remove
ir_variable::uniform_block". Suggested by Carl Worth.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Not used yet, but the UBO layout visitor will use this.
v2: Add some commentary as to why row_major is always set to false in
process. Suggesed by Paul Berry.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Carl Worth <cworth@cworth.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
For the first declaration below, there will be an ir_variable named
"instance" whose type and whose instance_type will be the same
glsl_type. For the second declaration, there will be an ir_variable
named "f" whose type is float and whose instance_type is B2.
"instance" is an interface instance variable, but "f" is not.
uniform B1 {
float f;
} instance;
uniform B2 {
float f;
};
v2: Copy the comment message documentation into the code. Suggested by
Paul Berry.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Carl Worth <cworth@cworth.org>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
For variables that are in an interface block or are an instance of an
interface block, this is the GLSL_TYPE_INTERFACE type for that block.
Convert the ir_variable::is_in_uniform_block method added in the
previous commit to use this field instead of ir_variable::uniform_block.
v2: Fix the place-holder comment on ir_variable::interface_type.
Suggested by Paul Berry.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Carl Worth <cworth@cworth.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The way a variable is tested for this property is about to change, and
this makes the code easier to modify.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Carl Worth <cworth@cworth.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
If the block has an instance name, add the instance name to the symbol
table instead of the individual fields.
Fixes the piglit test interface-name-access-without-interface-name.vert
for real.
v2: Update the comment before the assertion that interface block
definitions won't generate instructions. Suggested by Paul Berry.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Interfaces are structurally identical to structures from the compiler's
point of view. They have some additional restrictions, and generally
GPUs use different instructions to access them. Using a different base
type should make this a bit easier.
This commit also adds the glsl_type::interface_packing fields. For
GLSL_TYPE_INTERFACE types, this will track the specified packing mode.
It is analogous to gl_uniform_buffer::_Packing.
v2: Add serveral missing GLSL_TYPE_INTERFACE cases in switch-statements.
v3: Add information about glsl_type::interface_packing. Move row_major
checking in glsl_type::record_key_compare from this patch to the
previous patch. Both suggested by Paul Berry.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
For now, this will always be false. In the near future, an "interface"
type will be added that shares a lot of infrastructure with structures.
v2: Move row_major checking in glsl_type::record_key_compare from the
next patch to this patch. Suggested by Paul Berry.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Carl Worth <cworth@cworth.org>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The size is parsed and stored in the AST, but it is not used yet.
Processing of the array size is added in the patch "glsl: Handle
instance array declarations"
v2: Update the commit message (suggested by Carl Worth). Add a comment
to ast_uniform_block::array_size (suggested by Paul Berry).
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
In GLSL ES 3.00 (and GLSL 1.50), uniform blocks can have an associated
"instance name", which essentially namespaces the variables inside.
This patch adds basic parsing for this new feature, but doesn't yet hook
it up to actually do anything yet.
It does not support for arrays of interface blocks; a later commit will
take care of that.
This change temporarily regresses the piglit test
interface-name-access-without-interface-name.vert. This shader failed
to compile before (the expected result), but it failed to compile for
the wrong reason. This is not a real regression.
v2: Add some comments to ast_uniform_block::instance_name. Suggested by
Paul Berry.
Reviewed-by: Carl Worth <cworth@cworth.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The existing code has a lot of duplication; the only difference between
the two cases is whether we merge in an additional layout qualifier.
Apparently creating a layout_qualifieropt rule that can be empty causes
a lot of conflicts and confusion. However, refactoring out the guts of
the ast_uniform_block creation works fine.
Reviewed-by: Carl Worth <cworth@cworth.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Also slightly change the compatibility test. Instead of comparing the
offsets of the block variables, compare the packing mode of the blocks.
Ideally we don't want to assign the offsets until a later stage of
linking.
This is put in a new file called link_uniform_blocks.cpp. Some new
functions related to uniform blocks are going to live in that file as
well.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Carl Worth <cworth@cworth.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This makes it easier to find switch-statements that need to be updated
after a new GLSL_TYPE_* is added because the compiler will generate a
warning.
Switch-statements that only had a small number of cases (e.g.,
everything in ir_constant_expression.cpp) were not modified. I may
regret that decision when we eventually add support for doubles.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Carl Worth <cworth@cworth.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Too much attention was paid to the first paragraphs, and not enough to
the last little note that "oh, by the way, the rendered things
themselves still have to be clipped to just 8192 wide/high".
Fixes GTF's clip.c test with 4096 or higher width on ivb, where one of
the triangles got the upper half of its pixels dropped.
Tested-by: Ian Romanick <ian.d.romanick@intel.com>
Khronos has apparently decided that depth textures with sized formats
(allowed with ARB_internalformat_query or ES 3.0) should be treated as
GL_RED, while unsized formats (an existing feature) should be treated
as GL_INTENSITY for compatibility with ES 2.0.
Ian is proposing changes to ARB_internalformat_query which will make
this actually legal and consistent.
A similar problem exists with GL 4.2, but we're going to ignore that
for the time being.
Tested on Ivybridge: no Piglit regressions; fixes 4 es3conform tests:
- depth_texture_fbo
- depth_texture_fbo_clear
- depth_texture_teximage
- depth_texture_texsubimage
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Since patch "i965: Validate requested GLES context version in
brwCreateContext", we have been able to create ES 3.0 contexts due to the
max version check. So...bump the max version.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
v2: Add ARB_internalformat_query to the list of required extensions.
v3: Add OES_depth_texture_cube_map to the list of required extensions.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
s/src/src_w/
That little typo, which sneaked into v4 of the previous patch, generates
incorrect fs code.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
FIXME: This patch emits VS code that violates documented hardware
restrictions and then relies on undocumented behavior that results from
that violation. This patch passes all tests, but should be fixed ASAP to
conform to the hardware documentation.
v2: Explain undocumented hardware behavior. Improve comments.
v3: Use ALU1 helper methods F32TO16() and F16TO32(). [for anholt]
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> (v1)
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
The GLSL ES 3.00 operations packHalf2x16 and unpackHalf2x16 will emit
these opcodes.
- Define the opcodes BRW_OPCODE_{F32TO16,F16TO32}.
- Add the opcodes to the brw_disasm table.
- Define convenience functions brw_{F32TO16,F16TO32}.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Acked-by: Paul Berry <stereotype441@gmail.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
On gen < 7, we fully lower all operations to arithmetic and bitwise
operations.
On gen >= 7, we fully lower the Snorm2x16 and Unorm2x16 operations, and
partially lower the Half2x16 operations.
v2:
- Comment that scalarization is needed only for SOA code [for idr].
- Replace switch-statement with if-statement [for idr].
- Remove misplaced hunk from previous patch [found by idr].
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Tuner <mattst88@gmail.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Lower them to arithmetic and bit manipulation expressions.
v2: Rewrite using ir_builder [for idr].
v3: Comment typos. [for mattst88]
v4: Fix arithmetic error in comments.
Factor out a shift instruction.
Don't heap allocate factory.instructions.
[for paul]
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> (v2)
Reviewed-by: Matt Tuner <mattst88@gmail.com> (v3)
Reviewed-by: Paul Berry <stereotype441@gmail.com> (v4)
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
In ir_expression's constructor, the cases for {bit,logic}_{and,or,xor}
failed to handle the case when both operands were vectors.
Note: This is a candidate for the stable branches.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Replace tabs with spaces. According to docs/devinfo.html, Mesa's
indetation style is:
indent -br -i3 -npcs --no-tabs infile.c -o outfile.c
This patch prevents whitespace weirdness in the next patch.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add two overloaded variants of
ir_if *if_tree()
The new functions allow one to chain together if-trees within a single C++
expression that resembles a real if-statement.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Using this enum improves the readibility of calls to assign(), whose third
argument is a writemask.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add method ir_factory::constant. This little method constructs an
ir_constant using the factory's mem_ctx.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add the following functions, each of which construct the similarly named
ir expression:
div, round_even, clamp
equal, less, greater, lequal, gequal
logic_not, logic_and, logic_or
bit_not, bit_or, bit_and, lshift, rshift
f2i, i2f, f2u, u2f, i2u, u2i
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
That is, evaluate constant expressions of the following functions:
packSnorm2x16 unpackSnorm2x16
packUnorm2x16 unpackUnorm2x16
packHalf2x16 unpackHalf2x16
v2: Reuse _mesa_pack_float_to_half and its inverse to evaluate
pack/unpackHalf2x16. [for idr]
v3: Whitespace fixes. [for mattst88]
Don't cast neg floats directly to uint16; use an intermediate cast to
int16. [for paul]
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> (v2)
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Matt Tuner <mattst88@gmail.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Not all float32 values can be exactly represented as a float16.
_mesa_float_to_half() rounded such intermediate float32 values to zero by
truncating unrepresentable bits in the mantissa.
This patch improves _mesa_float_to_half() by rounding intermediate float32
values to the nearest float16; when the float32 is exactly between two
float16 values we round to the one with an even mantissa. This behavior is
preferred over the old behavior because:
- It has reduced bias relative to the old behavior.
- It reproduces the behavior of real hardware: opcode F32TO16 in
Intel's GPU ISA.
- By reproducing the behavior of the GPU (at least on Intel hardware),
compile-time evaluation of constant packHalf2x16 GLSL expressions will
result in the same value as if the expression were executed on the GPU.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Move round_to_even's definition to mesa/main so that _mesa_float_to_half()
can use it in order to eliminate rounding bias.
In additon to moving the fuction definition, prefix its name with "_mesa",
just as all other functions in mesa/main are prefixed.
v2: Fix Android build.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
A subsequent patch will add mesa/main/imports.c as a dependency to the
compiler, which in turn requires that _mesa_warning() be defined.
The real definition of _mesa_warning() is in mesa/main/errors.c, but to
pull that file into the standalone scaffolding would require transitively
pulling in the dispatch tables.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Acked-by: Paul Berry <stereotype441@gmail.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
For each function {pack,unpack}{Snorm,Unorm,Half}2x16, add a corresponding
opcode to enum ir_expression_operation. Validate the new opcodes in
ir_validate.cpp.
Also, add opcodes for scalarized variants of the Half2x16 functions. (The
code generator for the i965 fragment shader requires that all vector
operations be scalarized. A lowering pass, to be added later, will
scalarize the Half2x16 functions).
v2: Fix assertion message in ir_to_mesa [for idr].
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Tuner <mattst88@gmail.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
For each of the following functions, add a declaration to
builtins/profiles/300es.glsl and create new file
builtins/ir/${funcname}.ir:
packSnorm2x16 unpackSnorm2x16
packUnorm2x16 unpackUnorm2x16
packHalf2x16 unpackHalf2x16
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Tuner <mattst88@gmail.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
s/num_operands()/get_num_operands()/
Discovered because Eclipse failed to resolve the false reference.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
The bug: The printed horizontal stride was the numerical value of the
BRW_HORIZONTAL_$N enum.
The fix: Translate the enum before printing.
Note: This is a candidate for the stable releases.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
When possible, glCopyTexSubImage calls are performed using the
hardware blitter. However, according to the Ivy Bridge PRM, Vol1
Part4, section 1.2.1.2 (Graphics Data Size Limitations):
The BLT engine is capable of transferring very large quantities of
graphics data. Any graphics data read from and written to the
destination is permitted to represent a number of pixels that
occupies up to 65,536 scan lines and up to 32,768 bytes per scan
line at the destination. The maximum number of pixels that may be
represented per scan line’s worth of graphics data depends on the
color depth.
With an RGBA32F color buffer (which has 16 bytes per pixel) this
imposes a maximum width of 2048 pixels. Other pixel formats have
accordingly larger limits.
To make matters worse, if the pitch of the buffer is 32k or greater,
intel_copy_texsubimage's call to intelEmitCopyBlit will overflow
intelEmitCopyBlit's src_pitch and dst_pitch parameters (which are
16-bit signed integers).
We can conveniently avoid both problems by avoiding use of the blitter
when the miptree's pitch is >= 32k.
Fixes gles3conform "framebuffer_blit_functionality_magnifying_blit"
tests when the buffer width is equal to 8192.
Note: this is very similar to the recent patch "intel: Fix ReadPixels
on buffers whose width >= 32kbytes" except that it applies to
glCopyTexSubImage instead of glReadPixels. In a future patch it would
be nice to refactor the code so that (a) overflow is avoided, and (b)
intelEmitCopyBlit is responsible for checking whether the blitter can
handle the width, so that all callers of intelEmitCopyBlit work
properly, rather than just these two.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously I thought that varying structs had been added to GLSL ES
3.00 by mistake, because chapter 11 of the GLSL ES 3.00 spec
("Counting of Inputs and Outputs") failed to mention how structs
should be handled. Khronos has clarified
(https://cvs.khronos.org/bugzilla/show_bug.cgi?id=9828) that varying
structs are indeed required, and that chapter 11 will be modified to
indicate that the minimal reference packing algorithm flattens varying
structs to their individual components.
Mesa doesn't flatten varying structs to their individual components,
but this is ok, since it packs varyings of all kinds with no wasted
space at all (except where this is impossible due to differing
interpolation modes), so it will outperform the minimal reference
packing algorithm in all but the most pathological cases.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
It is not clear from the GLSL ES 3.00 spec how transform feedback is
supposed to apply to varying structs:
- There is no specification for how the structure is to be packed when
it is recorded into the transform feedback buffer.
- There is no reasonable value for GetTransformFeedbackVarying to
return as the "type" of the variable.
We currently have a Khronos bug requesting clarification on how this
feature is supposed to work
(https://cvs.khronos.org/bugzilla/show_bug.cgi?id=9856).
This patch just disables transform feedback of varying structs for
now; we can implement the proper behaviour once we find out from
Khronos what it is.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This patch adds code to lower_packed_varyings to handle varyings of
type struct. Varying structs are currently packed in the most naive
possible way (in declaration order, with no gaps), so there is a
potential loss of runtime efficiency. In a later patch it would be
nice to replace this with a "flattening" approach (wherein a varying
struct is flattened to individual varyings corresponding to each of
its structure elements), so that the linker can align each structure
element independently. However, that would require a significantly
more complex implementation.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This patch paves the way for allowing varying structs by generalizing
varying_matches::compute_packing_order to handle any type of varying.
Previously, we packed in the order (vec4, vec2, float, vec3), with
matrices being packed according to the size of their columns. Now, we
pack everything according to its number of components mod 4, in the
order (0, 2, 1, 3).
There is no behavioural change for vectors. Matrices are now packed
slightly differently:
- mat2x2 gets assigned PACKING_ORDER_VEC4 instead of
PACKING_ORDER_VEC2. This is slightly better, because it guarantees
that the matrix occupies a single varying slot.
- mat2x3 gets assigned PACKING_ORDER_VEC2 instead of
PACKING_ORDER_VEC3. This is kind of a wash. Previously, mat2x3 had
a 25% chance of having neither of its columns double parked, a 50%
chance of having exactly one of its columns double parked, and a 25%
chance of having both of its columns double parked. Now it always
has exactly one of its columns double parked.
- mat3x3 gets assigned PACKING_ORDER_SCALAR instead of
PACKING_ORDER_VEC3. This doesn't affect much, since in both cases
there is no guarantee of how the matrix will be aligned.
- mat4x2 gets assigned PACKING_ORDER_VEC4 instead of
PACKING_ORDER_VEC2. This is slightly better for the same reason as
in mat2x2.
- mat4x3 gets assigned PACKING_ORDER_VEC4 instead of
PACKING_ORDER_VEC3. This is slightly better for the same reason as
in mat2x2.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Previously, it didn't matter whether structure splitting tried to
split shader ins/outs, because structs were prohibited from being used
for shader ins/outs. However, GLSL 3.00 ES supports varying structs.
In order for varying structs to work, we need to make sure that
structure splitting doesn't get applied to them, because if it does,
then the linker won't be able to match up varyings properly.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This patch replaces the three ir_variable_mode enums:
- ir_var_in
- ir_var_out
- ir_var_inout
with the following five:
- ir_var_shader_in
- ir_var_shader_out
- ir_var_function_in
- ir_var_function_out
- ir_var_function_inout
This eliminates a frustrating ambiguity: it used to be impossible to
tell whether an ir_var_{in,out} variable was a shader in/out or a
function in/out without seeing where the variable was declared in the
IR. This complicated some optimization and lowering passes, and would
have become a problem for implementing varying structs.
In the lisp-style serialization of GLSL IR to strings performed by
ir_print_visitor.cpp and ir_reader.cpp, I've retained the names "in",
"out", and "inout" for function parameters, to avoid introducing code
churn to the src/glsl/builtins/ir/ directory.
Note: a couple of comments in the code seemed to indicate that we were
planning for a possible future in which geometry shaders could have
shader-scope inout variables. Our GLSL grammar rejects shader-scope
inout variables, and I've been unable to find any evidence in the GLSL
standards documents (or extensions) that this will ever be allowed, so
I've eliminated these comments.
Reviewed-by: Carl Worth <cworth@cworth.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
The case statement purported to handle the addition of ir_var_const_in
and ir_var_inout builtin variables. But no such variables exist.
This patch removes the unnecessary cases, and adds a comment
explaining why they're not needed.
Reviewed-by: Carl Worth <cworth@cworth.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
For texelFetchOffset(), we just add the texel offsets to the coordinate
rather than using the message header's offset fields. So we don't
actually need a header on Gen5+.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
When possible, glReadPixels calls are performed using the hardware
blitter. However, according to the Ivy Bridge PRM, Vol1 Part4,
section 1.2.1.2 (Graphics Data Size Limitations):
The BLT engine is capable of transferring very large quantities of
graphics data. Any graphics data read from and written to the
destination is permitted to represent a number of pixels that
occupies up to 65,536 scan lines and up to 32,768 bytes per scan
line at the destination. The maximum number of pixels that may be
represented per scan line’s worth of graphics data depends on the
color depth.
With an RGBA32F color buffer (which has 16 bytes per pixel) this
imposes a maximum width of 2048 pixels.
To make matters worse, if the pitch of the buffer is 32k or greater,
intel_miptree_map_blit's call to intelEmitCopyBlit will overflow
intelEmitCopyBlit's src_pitch and dst_pitch parameters (which are
16-bit signed integers).
We can conveniently avoid both problems by avoiding the readpixels
blit path when the miptree's pitch is >= 32k.
Fixes gles3conform "half_float" tests when the buffer width is greater
than 2048.
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Ian Romanick <ian.d.romanick@intel.com>
This reverts commit 7824ab8070.
Now that we force linking with LLVM shared libs when building clover,
we can link against libgallium.la with no problems.
If we build clover with LLVM static libraries, then clover and also each
pipe_*.so driver that is built will contain their own static copy of
LLVM. The recent automake changes have uncovered a problem where
the pipe_*.so drivers try to use clover's LLVM symbols. This causes
LLVM's static registry objects to be initialized each time
a pipe_*.so driver is loaded by clover. Initializing these objects
multiple times is not allowed and leads to assertion failures in the
LLVM code.
We can avoid all these problems by having clover and all the pipe_*.so
drivers link against the same LLVM shared library.
https://bugs.freedesktop.org/show_bug.cgi?id=59334https://bugs.freedesktop.org/show_bug.cgi?id=59534
v2:
- Fix shared library detection when LLVM is built with CMake
In order to determine which static LLVM libraries are needed we pass
a list of components to llvm-config and it generates the list of
library dependencies for us. The advantage of only calling llvm-config
one time is that it can determine if two components depend on the same
library and then add it to the output list only once. The old practice
of having each driver call llvm-config to add its own dependencies to
$(LLVM_LIBS) caused many libraries to be added to this variable multiple
times.
Always enable the use of pre-compressed texture data. The ability to
perform on-line compression still requires the presence of libtxc_dxtn
or an explicit driconf over-ride. Applications that just want to submit
precompessed data when an on-line compressor is not available can look
for the GL_EXT_texture_compression_dxt1 and
GL_ANGLE_texture_compression_dxt[35] extensions.
v2: Only enable the extensions that do not require on-line compression
by default. The previous statement "This should not impact many (if
any) real applications." proved to be false for at least Sauerbraten.
This application mostly submits pre-compressed data, but it also can
submit uncompressed data that it asks the driver to compress.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> [v1]
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> [v1]
Acked-by: Eric Anholt <eric@anholt.net> [v1]
Acked-by: Lee Salzman <lsalzman@gmail.com>
This is technically outside the ANGLE spec, but it seems unlikely to
cause any harm.
v2: Simplify the extension checks by assuming the ANGLE extension will
always be enabled by any driver that enables the EXT. Suggested by
Eric Anholt.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Lee Salzman <lsalzman@gmail.com>
For non-generic compressed format we assert two things:
1. The format has already been validated against the set of available
extensions.
2. The driver only enables the extension if it supports all of the
formats that are part of that extension.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Similar to the previous commit, we may be using a texture with actual RGBA
storage for the GL_ALPHA format, so force the color values to 0.0.
This commit fixes the following piglit (sub) tests:
EXT_texture_snorm/fbo-blending-formats
GL_ALPHA16_SNORM
GL_ALPHA8_SNORM
GL_ALPHA_SNORM
Note: Haswell bypasses this swizzle code, so may require an independent fix
for this bug.
Reviewed-by: Eric Anholt <eric@anholt.net>
We may be using a texture with actual RGBA storage for these formats, so force
the alpha value read to 1.0.
This commit fixes the following piglit (sub) tests:
ARB_texture_float/fb-blending-formats
GL_RGB16F_ARB
EXT_framebuffer_object/fbo-blending-formats
GL_RGB10
GL_RGB12
GL_RGB16
EXT_texture_snorm/fbo-blending-formats
GL_RGB16_SNORM
GL_RGB8_SNORM
GL_RGB_SNORM
These test improvements depend on the previous commit as well. That commit
smashes alpha to 1.0 for the case of ReadPixels (so fixes "FBO testing" as
reported by this test), while this commit smashes alpha to 1.0 for the case of
texturing (fixed the "window testing" as reported by this test).
Note: Haswell bypasses this swizzle code, so may require an independent fix
for this bug.
Reviewed-by: Eric Anholt <eric@anholt.net>
When performing a ReadPixels operation, we may be reading from a buffer that
stores alpha values, but that is actually representing a buffer with no alpha
channel. In this case, while rebasing the values, touch up all alpha values
read to 1.0.
This commit fixes the following piglit (sub) tests:
ARB_texture_float/fbo-colormask-formats
GL_RBG16F_ARB
EXT_texture_snorm/fbo-colormask-formats
GL_RGB16_SNORM
GL_RGB8_SNORM
GL_RGB_SNORM
It likely improves the results of other tests as well, but a PASS remains
elusive due to additional bugs.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
The renderbuffer's Format field may have an alpha channel even when the
underlying _BaseFormat does not. This can happen when mesa chooses to use
RGBA16 for an RGB16 format, for example.
So look at _BaseFormat when deciding whether to fixup the blend factors.
This test improves the results of at least the following piglit tests:
EXT_frambebuffer_object/fbo-blending-formats
{GL_RGB10, GL_RGB12, GL_RGB16}
EXT_texture_snorm/fbo-blending-formats
{GL_RGB16_SNORM, GLRGB8_SNORM, GL_RGB_SNORM}
But none of these actually change from FAIL to PASS yet. The R, G, and B probe
values are fixed with this commit, but the tests still fail because the alpha
values are still wrong.
Reviewed-by: Eric Anholt <eric@anholt.net>
/ vs \ mismatch was causing .objs to be put in the source tree, causing
breakeage when doing different build types in the same tree (eg., debug
vs release).
Fix this by normalizing everything to / slashes.
It's probably a good idea to purge all .objs from source tree to prevent
issues completely.
Thanks to Fredrik Höglund, all the hard work was already done.
Tested using a modified oglconform (that actually runs these tests on
our driver); it looks like there may be some bugs when using client
arrays. All applicable non-compatibility tests passed.
For now, only enable it in core profiles.
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Ian Romanick <idr@freedesktop.org>
Squashed with two reverts:
Revert "android: Update for builtin_stubs.cpp move"
This reverts commit c0def90ede.
Revert "scons: Update for builtin_stubs.cpp"
This reverts commit 8ac4b82699.
Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Tested-on-Android-by: Chad Versace <chad.versace@linux.intel.com>
I don't see how this could have ever worked right.
The screen-space interpolation code uses the vertex->data[pos_attr]
position which contain window coords. But window coords are only
computed for the unclipped vertices; the clipped vertices have
undefined window coords (see draw_cliptest_tmp.h).
Use the vertex clip coords instead which are always defined.
Fixes http://bugs.freedesktop.org/show_bug.cgi?id=55476
(piglit fbo-blit-stretch failure on softpipe)
Note: This is a candidate for the 9.0 branch.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
In debug builds, set clipped vertex window coordinates to NaN values
to help debugging. Otherwise, we're just leaving the coordinate in clip
space and it's invalid to use it later expecting it to be a window coord.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Fixes piglit spec/ARB_sampler_objects/sampler-incomplete and
spec/EXT_texture_swizzle/depth_texture_mode_and_swizzle.
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
This error was added in the 3.0.1 update to the OpenGL ES 3.0 spec.
Fixes the updated gles3conform packed_depth_stencil_parameters test.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Fixes gles3conform test CoverageES30. It temporarily regresses some
framebuffer_blit tests, but the failing subcases have been determined to
be invalid for OpenGL ES 3.0.
v2: Fix typo in depth (and stencil) RB checking. Noticed by Ken.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
These were introduced in 2000 during a rework of the TNL module (commit
cab974cf6c), though I'm having a hard time
finding an instance there of one of these Exec functions being changed
at runtime.
Regardless, as far as I can tell now, these functions don't get changed,
by grepping for calls to SET_* to change the dispatch table (we do change
functions in GLvertexformat at runtime, but those don't overlap with
this set of functions). Remove them and just let them be initialized to
the same functions as are in the Exec table.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This cuts out a ton of code to make functions not set to a save_ variant
match.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This will let us copy from the Exec dispatch to deal with our commands that
don't get compiled into display lists.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
I want to drive the Save dispatch table setup from this same function.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
All callers are in Mesa core and all use _gloffset_COUNT, so just rely on
the already baked-in use of _gloffset_COUNT in the function.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
We now have a separate dispatch table for begin/end that prevent these
functions from being entered during that time. The
ASSERT_OUTSIDE_BEGIN_END_WITH_RETVALs are left because I don't want to
change any return values or introduce new error-only stubs at this
point.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This is a step toward getting rid of ASSERT_OUTSIDE_BEGIN_END() in Mesa.
v2: Finish create_beginend_table() comment, move loopback API init into it,
and add a const flag. (suggestions by Brian)
Reviewed-by: Brian Paul <brianp@vmware.com> (v1)
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> (v1)
My change 7ca4f07b5b caused errors to not
be thrown when they should, because the new if statement for ExecuteFlag
made the CurrentSavePrimitive not get set. And on further review, we
shouldn't be validating our primitive in GL_COMPILE mode, since the
command shouldn't be executed yet.
Partially fixes piglit gl-1.0-beginend-coverage.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This reduces jitter slightly in a cleaner way, without desynchronizing mplayer2 as badly
when falling behind.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
It appears that scons implicit dependency scanners fail to chain
dependencies of generated headers when these are outside the build tree.
This patch ensures generated source files are _always_ put in the build
tree. I'm not 100% this will fix all depency issues, but from my
experiments it does seem to fix this.
NOTE: For this to be effective it is necessary to clean the source tree
from generated header/source files.
Reviewed-by: Brian Paul <brianp@vmware.com>
There really isn't any point. There is no resource savings, and we have
to do gymnastics in the driver to make it work.
There are also bad interactions with multisampling and OpenGL ES 3.0.
In ES3, a multisample-to-singlesample blit must have identical source
and destination format. This means a multisample RGBA8 to singlesample
RGB8 (window) blit will generate an error. Also in ES3, RGB8 is not a
renderable format. This means that the application CANNOT make an RGB8
multisample renderbuffer.
As a result, if an application gets an RGB8 window and wants to do
multisample FBO rendering, it will probably break.
"Fixes" gles3conform
framebuffer_blit_functionality_multisampled_to_singlesampled_blit test
on RGB8 visuals.
v2: Fix 'formats' array size. Suggested by Ken.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>
[ Squashed port of the following r600g commits: - Michel Dänzer ]
commit 428e37c2da
Author: Marek Olšák <maraeo@gmail.com>
Date: Tue Oct 2 22:02:54 2012 +0200
r600g: add in-place DB decompression and texturing with DB tiling
The decompression is done in-place and only the compressed tiles are
decompressed. Note: R6xx-R7xx can do that only with Z16 and Z32F.
The texture unit is programmed to use non-displayable tiling and depth
ordering of samples, so that it can fetch the texture in the native DB format.
The latest version of the libdrm surface allocator is required for stencil
texturing to work. The old one didn't create the mipmap tree correctly.
We need a separate mipmap tree for stencil, because the stencil mipmap
offsets are not really depth offsets/4.
There are still some known bugs, but this should save some memory and it also
improves performance a little bit in Lightsmark (especially with low
resolutions; tested with Radeon HD 5000).
The DB->CB copy is still used for transfers.
commit e2f623f1d6
Author: Marek Olšák <maraeo@gmail.com>
Date: Sat Jul 28 13:55:59 2012 +0200
r600g: don't decompress depth or stencil if there isn't any
commit 43e226b6ef
Author: Marek Olšák <maraeo@gmail.com>
Date: Wed Jul 18 00:32:50 2012 +0200
r600g: optimize uploading depth textures
Make it only copy the portion of a depth texture being uploaded and
not the whole 2D layer.
There is also a little code cleanup.
commit b242adbe5c
Author: Marek Olšák <maraeo@gmail.com>
Date: Wed Jul 18 00:17:46 2012 +0200
r600g: remove needless wrapper r600_texture_depth_flush
commit 611dd52942
Author: Marek Olšák <maraeo@gmail.com>
Date: Wed Jul 18 00:05:14 2012 +0200
r600g: init_flushed_depth_texture should be able to report errors
commit 80755ff563
Author: Marek Olšák <maraeo@gmail.com>
Date: Sat Jul 14 17:06:27 2012 +0200
r600g: properly track which textures are depth
This fixes the issue with have_depth_texture never being set to false.
commit fe1fd67556
Author: Marek Olšák <maraeo@gmail.com>
Date: Sun Jul 8 03:10:37 2012 +0200
r600g: don't flush depth textures set as colorbuffers
The only case a depth buffer can be set as a color buffer is when flushing.
That wasn't always the case, but now this code isn't required anymore.
commit 5a17d8318e
Author: Marek Olšák <maraeo@gmail.com>
Date: Sun Jul 8 02:14:18 2012 +0200
r600g: flush depth textures bound to vertex shaders
This was missing/broken. There are also minor code cleanups.
commit dee58f94af
Author: Marek Olšák <maraeo@gmail.com>
Date: Sun Jul 8 01:54:24 2012 +0200
r600g: do fine-grained depth texture flushing
- maintain a mask of which mipmap levels are dirty (instead of one big flag)
- only flush what was requested at a given point and not the whole resource
(most often only one level and one layer has to be flushed)
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Use r600_resource_texture::flished_depth_texture for GPU access, and
allocate it in the VRAM. For transfers we'll allocate texture in the GTT
and store it in the r600_transfer::staging.
Improves performance when flushed depth texture is frequently used by the
GPU, e.g. in Lightsmark
[ Ported from r600g commit 3770847960 ]
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
[ Squashed port of the following r600g commits: - Michel Dänzer ]
commit c1e8c845ea
Author: Marek Olšák <maraeo@gmail.com>
Date: Sat Jul 7 19:10:00 2012 +0200
r600g: inline r600_hw_copy_region
commit 4891c5dc64
Author: Marek Olšák <maraeo@gmail.com>
Date: Mon Jun 25 22:53:21 2012 +0200
r600g: inline r600_blit_push_depth and use resource_copy_region
We are going to have a separate resource for depth texturing and transfers
and this is just a transfer thing.
commit da98bb6fc1
Author: Marek Olšák <maraeo@gmail.com>
Date: Mon Jun 25 12:45:32 2012 +0200
r600g: split flushed depth texture creation and flushing
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Allow additional format/type combinations based on the
color render buffer to fix failures with gles3-gtf.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
For GLES2/3 allow reading of pixels with format/type based on:
* GL_IMPLEMENTATION_COLOR_READ_FORMAT
* GL_IMPLEMENTATION_COLOR_READ_TYPE
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
[mattst88] v2: Enable only for ES3 per spec.
[mattst88] v3: Use _mesa_is_gles3 since EXT_color_buffer_float is
ES3-only.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
For now I'm just enabling this on the same subset of hardware that has
OpenGL 3.0 enabled. This same functionality is part of OpenGL 3.0, and
there is no matching desktop extension.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
They're part of GL_OES_depth_texture_cube_map, and we'll always enable
that extension in ES3 contexts.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The vs part hasn't been wired up since tgsi_sse2 was disabled in:
commit 4eb3225b38
Author: José Fonseca <jose.r.fonseca@gmail.com>
Date: Tue Nov 8 00:10:47 2011 +0000
Remove tgsi_sse2.
And it would certainly not work correctly in its current state:
draw/draw_vs_ppc.c: In function ‘draw_create_vs_ppc’:
draw/draw_vs_ppc.c:190:24: warning: assignment from incompatible pointer
type [enabled by default]
As with the sse2 backend, this should be done in llvm anyway.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
configure should warn if libxml2 is not found.
libxml2 is needed by glapi/gen.
Fixes error during build in src/mapi/glapi/gen:
ImportError: No module named libxml2
NOTE: This is a candidate for the 9.0 branch.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31598
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This is required by OpenGL ES 3.0 and desktop OpenGL 4.2. Previous
version were ambiguous. This also matches the behavior of NVIDIA's
closed-source driver (version 304.64).
Fixed gles3conformance test uniform_buffer_object_getactiveuniformsiv
and uniform_buffer_object_structure_and_array_element_names (on my
in-progress branch that fixes a bunch of other stuff...YMMV).
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This is required by OpenGL ES 3.0 and desktop OpenGL 4.2. Previous
version were ambiguous. This also matches the behavior of NVIDIA's
closed-source driver (version 304.64).
Fixed gles3conformance test uniform_buffer_object_getactiveuniform.
Several piglit tests expect glGetActiveUniform to *not* include the [0]
on the end. These tests were already failing on NVIDIA, and this change
regresses them on Mesa. Patches have been sent to the piglit mailing
list to fix the tests.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We currently have a bug in this code, and I don't want to fix it in two
places.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The GLSL 1.40 spec says:
"Uniform block names and variable names declared within uniform
blocks are scoped at the program level."
Track the block name in the symbol table and emit errors when conflicts
exist.
Fixes es3conform's uniform_buffer_object_block_name_conflict test, and
fixes the piglit block-name-clashes-with-{variable,function,struct}.vert
tests.
NOTE: This is a candidate for the 9.0 branch.
v2: Fix bad constructor initialization. Noticed by Topi Pohjolainen.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
About both row_major and column_major layout qualifiers, the GLSL spec
says:
"It only affects the layout of matrices."
However, the OpenGL ES 3.0 conformance tests have taken this to mean it
is an error use it elsewhere. This seems logical given that
'layout(row_major) vec4 foo' is probably not what the programmer meant.
The only catch is dealing with structures that contain matrices. Layout
qualifiers cannot be applied directly to fields of structures, so the
only way to affect the layout of the fields is to apply a qualifier to
the structure declaration itself. There is ongoing debate about this
within Khronos, and it seems to be settling in favor of allowing the
qualifiers on structures. I light of this, I have chosen to allow the
qualifiers on structures but emit a warning since the usage may not be
portable.
Fixes gles3conform test
uniform_buffer_object_layouts_not_for_matrix_type and causes no
regressions.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Between the previous commit and this one, improves GLBenchmark 2.1
offscreen performance by 0.48% +/- 0.24% (n=22, throttling outliers
removed).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This is for GL_ARB_texture_buffer_object_rgb32 support, but it also
causes the format to get used for float32 rgb textures as well on
Ironlake and later. Since that came with some surprises, separate
the change from the enable commit.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We almost never want a stride in pixels -- if you're doing anything with
a stride, you're specifying an offset or incrementing a pointer, and in
both cases you had to multiply by cpp to get the bytes value you wanted.
But worse, on the way to creating a region from a new tiled BO, we
divided by cpp to get pitch in pixels, and for an RGB32 buffer (an
upcoming change) the pitch wouldn't divide exactly, and we'd end up with
a wrong stride in our region.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Vincent Lejeune:
- tgsi to llvm now emits pointers for constants
Tom Stellard:
- Only use texture cache for vtx fetch with compute shaders
- Change address space used for constant loads to match LLVM
backend.
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
According to the OpenGL 3.2 Core Profile specification, section 3.8.12:
"For one-, two-, and three-dimensional and one-and two-dimensional array
textures, a texture is mipmap complete if all of the following
conditions hold true:
- [...]
- levelbase <= levelmax [...]
Using the preceding definitions, a texture is complete unless any of
the following conditions hold true:
- [...]
- The minification filter requires a mipmap (is neither NEAREST nor
LINEAR), and the texture is not mipmap complete."
(This text also appears in all GL >= 3.2 specs and the ES 3.0 spec.)
From this, we see that levelbase <= levelmax should only affect mipmap
completeness, not base-level completeness.
Prior versions of GL did not have the notion of mipmap completeness,
simply calling the texture incomplete in this case. But I don't think
we really care.
Fixes es3conform's sgis_texture_lod_basic_completeness test.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <idr@freedesktop.org>
The sampler appears to ignore writemasks (even when correcting the
WRITEMASK_XYZW in brw_vec4_emit.cpp to the proper writemask) and just
always writes all four values.
To cope with this, just texture into a temporary, then MOV out into a
register that has the proper number of components.
NOTE: This is a candidate for stable branches.
Fixes es3conform's shadow_execution_vert.test.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <idr@freedesktop.org>
Previously it was left undefined, causing us to select a random LOD.
NOTE: This is a candidate for stable branches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <idr@freedesktop.org>
This is purely a refactor. However, in a moment, we'll want to set
lod_type to float for ir_tex, where ir->lod_info.lod is NULL.
NOTE: This is a candidate for stable branches (for the next patch).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <idr@freedesktop.org>
Fixes regressions since commit 899017fc54
Author: Kenneth Graunke <kenneth@whitecape.org>
Date: Fri Jan 4 07:53:09 2013 -0800
i965: Use Haswell's sample_d_c for textureGrad with shadow samplers.
That patch assumed that all instances were lowered. However, we weren't
lowering textureGrad() with samplerCubeShadow because I couldn't figure
out the LOD calculations. It turns out they're easy: you just have to
use 1 for the depth. This causes it to pass oglconform's four tests.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Anuj Phogat <anuj.phogat@gmail.com>
Tested-by: Ian Romanick <idr@freedesktop.org>
Now that things mostly seem to work enable those formats.
Some formats cause crashes (notably RGB8 variants) so switch these off
(these crashes are not specific to INT/UINT variants but the state tracker
doesn't use them for UNORM etc. formats so it went unnoticed so far).
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Cast back the fake floats to ints, and make sure we don't try to do scaling
in format conversion (which only makes sense with normalized values).
Also need to disable blending and alpha test (as per spec) for such buffers.
This makes fbo-blending from the piglit ext_texture_integer tests work for most
formats (some crash, and the luminance and intensity variants have the GB or
GBA channels respectively wrong).
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
We were passing in the rt index however this was always 0 for non-independent
blend case. (The format was only actually used to decide if the color mask
covered all channels so this went unnoticed and was discovered by accident.)
Additionally, there was a second problem because we do fixups in the key based
on color buffer format we cannot use non-independent blend anyway as the fixed
up values would never get used.
So always turn non-independent blending into independent.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Filtering of DEPTH_COMPONENT and DEPTH_STENCIL for TEXTURE_3D is already
done in texture_error_check because these combinations aren't allowed on
desktop GL either.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
1. The loop over dest buffers in blit_linear() needed a null pointer
check. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=59499
2. The code to grab the drawRb's format needs to be inside the drawing loop.
3. An equality test was using = instead of == thus messing up a
renderbuffer attachment texture pointer. This lead to memory
corruption and a crash at exit.
Finally, fix a capitalization error NumDrawBuffers -> numDrawBuffers
and change type to unsigned to fix signed/unsigned comparison warnings.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Instead of deriving it from the colour buffer formats only.
Fixes a number of piglit tests which export depth from the pixel shader.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Fixes piglit 'spec/ARB_depth_buffer_float/fbo-clear-formats stencil' crash.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Enabling it for all resources still seems to cause problems, but depth/stencil
buffers are always accessed with tiling by the DB block.
Also, stick to 1D tiling for now. Getting 2D tiling to work properly will
require substantial changes in libdrm_radeon and possibly the kernel as well.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Apart from the obvious cleanup, this makes sure all blocks use the same tiling
mode for accessing the resource.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Currently the use of external firmware is required, with kernel and
userspace firmware needed for all Fermi cards except nvd9. Kepler and nvd9
should only require kernel firmware.
1. Loop over multiple destination color buffers. If we set
glDrawBuffers(GL_FRONT_AND_BACK) we need to loop over multiple color
buffers, blitting to each.
2. Add checks for null src/dst surface pointers. This fixes a crash
in the piglit fbo-missing-attachment-blit test.
See bug http://bugs.freedesktop.org/show_bug.cgi?id=59450
Reviewed-by: Reviewed-by: Marek Olšák <maraeo@gmail.com>
Use os.path.join() rather than hand-rolling it, so path is correct if
sys.argv[0] returns an absolute path.
(According to the python documentation, it's platform dependent whether
sys.argv[0] is a full pathname or not. It probably also depends on how
the process was started...)
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
It seems the other code expects surface[0..1] to be the luma field in interlaced case.
See for example vdpau/surface.c vlVdpVideoSurfaceClear and vlVdpVideoSurfacePutBitsYCbCr.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Writemask was XY instead of YZ (thanks to calim for spotting it).
The pixel calculation resulted in the pixel always being off by one.
If y was .5:
y' = round(y) + 0.5 = 1.5
Fixing this also means the LRP function has to swap the pixels it, since
it's now the other way around for top/bottom.
WIth these fixes only chroma for top and bottom pixel rows are wrongly interpolated
in my test program:
--- nvidia
+++ nouveau
@@ -1,4 +1,4 @@
-YCbCr[0] = 00c080
+YCbCr[0] = 00b070
YCbCr[1] = 00b070
YCbCr[2] = 029050
YCbCr[3] = 207050
@@ -61,4 +61,4 @@
YCbCr[60] = 0c5070
YCbCr[61] = c05090
YCbCr[62] = 0e70b0
-YCbCr[63] = e080c0
+YCbCr[63] = e070b0
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Use this method in _mesa_GetInternalformativ for both GL_SAMPLES and
GL_NUM_SAMPLE_COUNTS.
v2: internalFormat may not be color renderable by the driver, so zero
can be returned as a sample count. Require that drivers supporting the
extension provide a QuerySamplesForFormat function. The later was
suggested by Eric Anholt.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Though, I'm tempted to always expose this extension when
GL_ARB_framebuffer_object is exposed. In that case, it would share the same
enable bit.
v2: Correctly sort extension names. Suggested by Eric Anholt.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This is for the GL_ARB_internalformat_query extension and GLES 3.0.
v2: Generate GL_INVALID_OPERATION if the extension is not supported.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
OpenGL 4.2 specification suggests rounding the float data to nearest
integer when the type of internal state is integer. Out of range floats
should be clamped to {INT_MIN, INT_MAX}. This is not specified anywhere
in gl/gles spec but below test expects this behavior. This patch makes
gles3 conformance sgis_texture_lod_basic_getter.test pass.
A GL spec bug will be raised to include clamping of out of range floats.
V2: Round float to nearest integer for all cases where
_mesa_Texparameterf() converts float param to int. Use the same block of
float to int conversion code for GL_TEXTURE_SWIZZLE_{R,G,B,A}_EXT cases
as well.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This patch fixes a blitting case when drawAttachment->Texture ==
readAttachment->Texture. It was causing an assertion failure in
intel_miptree_attach_map() with gles3 conformance test case:
framebuffer_blit_functionality_minifying_blit
Number of changes in this file look scary. But most of them are caused
by introducing a big for loop to support rendering to multiple color
draw buffers.
V2: Fixed a case when number of draw buffer attachments are zero.
V3: Put a for loop in blit_nearest() and blit_linear() functions in to
support blitting to multiple color draw buffers.
V4: Remove variable declaration in for loop to avoid MSVC compilation
issues.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This patch adds required error checking in _mesa_BlitFramebuffer() when
blitting to multiple color render targets. It also fixes a case when
blitting to a framebuffer with renderbuffer/texture attached to
GL_COLOR_ATTACHMENT{i} (where i!=0). Earlier it skips color blitting if
nothing is found attached to GL_COLOR_ATTACHMENT0.
V2: Fixed a case when number of draw buffer attachments are zero.
V3: Do compatible_color_datatypes() and compatible_resolve_formats()
check for all the draw renderbuffers in fbobject.c. Fix debug code
at bottom of _mesa_BlitFramebuffer() to handle MRTs. Combine error
checking code for linear blits with other color blit error checking.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This allows query on default framebuffer in
glGetFramebufferAttachmentParameteriv() for gles3. Fixes unexpected GL
errors in gles3 conformance test case:
framebuffer_blit_functionality_multisampled_to_singlesampled_blit
V2: Use _mesa_is_gles3() check to restrict allowed attachment types to
specific APIs.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This patch enables blitting to multiple color attachments of a
framebuffer. It also fixes a case when blitting to a framebuffer with
renderbuffer/texture attached to non-zero attachment point
i.e. GL_COLOR_ATTACHMENT{1, 2, ...}. Earlier we were incorrectly
blitting to GL_COLOR_ATTACHMENT0 by default.
V2: Use intel_copy_texsubimage() for blitting only if all the color
attachments can blit using it.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This patch rewrites _mesa_meta_BlitFrameBuffer() function to add support
for blitting with GLSL/GLSL ES shaders. These changes were required to
support glBlitFrameBuffer() in gles3. This patch, along with other
patches in this series, make 16 failing framebuffer_blit test cases in
gles3 conformance pass.
V2: Properly handle flipped blits for source and destination
renderbuffer / textures. Add support for GL_TEXTURE_RECTANGLE in
_mesa_meta_BlitFrameBuffer. Create a temp depth texture to support
depth buffer blitting.
V3: Remove unsupported / redundant shader code. Add an assertion to make
sure that we don't use rectangle texture in ES. Put API guard on
glTexEnvi().
V4: For gles3: Don't use ReadPixels or CopyTexImage2D to blit depth
buffer. gles3 spec says for CopyTexImage2D that "color buffer
components can be dropped during the conversion to internalformat,
but new components cannot be added." So, use the internal format of
read renderbuffer to create texture for color buffer blitting.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <idr@freedesktop.org>
V2:
If mask has GL_STENCIL_BUFFER_BIT set, the depth formats for
readRenderBuffer and drawRenderBuffer must match unless one of the two
buffers doesn't have depth, in which case it's not blitted, so the
format check should be ignored. Same comment goes for stencil formats
in depth renderbuffers if mask has GL_DEPTH_BUFFER_BIT set.
v3 (Kayden): Refactor code to be a bit more readable.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
In ES 3.0, when calling glDrawBuffers() on the window system
framebuffer, the only valid targets are GL_NONE or GL_BACK. Since there
is no stereo rendering in ES 3.0, this is a single buffer, unlike
desktop where it may be two (and thus isn't allowed).
For single-buffered configs, GL_BACK ironically means the front (and
only) buffer. I'm not sure that it matters, however, as ES shouldn't
have front buffer rendering in the first place.
Fixes es3conform framebuffer_blit_coverage_default_draw_buffer_binding.
v2: Update GLES3 spec reference.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com> [v2]
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> [v1]
I didn't notice this due to a noobed piglit run. It wasn't previously
noticed because the patch was only run on a driver that supported GLES3.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
At process exit DLL_PROCESS_DETACH is signaled to DllMain(), where then
a final cleanup is triggered. In stw_cleanup() code is triggered that
tries to communicate a shutdown to the spawned threads -- however at
that time those threads have already been terminated by the OS and so
the process hangs.
v2: skip stw_cleanup_thread() too
Signed-off-by: José Fonseca <jfonseca@vmware.com>
Fixes error EGL_BAD_ATTRIBUTE in the tests below on Intel Sandybridge:
* piglit egl-create-context-verify-gl-flavor, testcase OpenGL ES 3.0
* gles3conform, revision 19700, when runnning GL3Tests with -fbo
This plumbing is added in order to comply with the EGL_KHR_create_context
spec. According to the EGL_KHR_create_context spec, it is illegal to call
eglCreateContext(EGL_CONTEXT_MAJOR_VERSION_KHR=3) with a config whose
EGL_RENDERABLE_TYPE does not contain the EGL_OPENGL_ES3_BIT_KHR. The
pertinent
portion of the spec is quoted below; the key word is "respectively".
* If <config> is not a valid EGLConfig, or does not support the
requested client API, then an EGL_BAD_CONFIG error is generated
(this includes requesting creation of an OpenGL ES 1.x, 2.0, or
3.0 context when the EGL_RENDERABLE_TYPE attribute of <config>
does not contain EGL_OPENGL_ES_BIT, EGL_OPENGL_ES2_BIT, or
EGL_OPENGL_ES3_BIT_KHR respectively).
To create this patch, I searched for all the ES2 bit plumbing by calling
`git grep "ES2_BIT\|DRI_API_GLES2" src/egl`, and then at each location
added a case for ES3.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
If the hardware/driver combo supports GLES3, then set the GLES3 bit in
intel_screen's bitmask of supported DRI API's. Neither the EGL nor GLX
layer uses the bit yet.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This enum corresponds to EGL_OPENGL_ES3_BIT_KHR.
Neither the GLX nor EGL layer use the enum yet.
I don't like the GLES bits. I'd prefer that all GLES APIs be exposed
through a single API bit, as is done in GLX_EXT_create_context_es_profile.
But, we need this GLES3 enum in order to do the plumbing necessary to
correctly support EGL_OPENGL_ES3_BIT_KHR as required by the
EGL_KHR_create_context spec.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Each driver (i830, i915, i965) used independent but similar code to
validate the requested context version. With the rececnt arrival of GLES3,
that logic has needed an update. Rather than apply identical updates to
each drivers validation code, let's just move the validation into the
shared routine intelInitContext.
This refactor required some incidental changes to functions
i830CreateContext and intelInitContext. For each function, this patch:
- Adds context version parameters to the signature.
- Adds a DRI_CTX_ERROR out param to the signature.
- Sets the DRI_CTX_ERROR at each early return.
Tested against gen6 with piglit egl-create-context-verify-gl-flavor.
Verified that this patch does not change the set of exposed EGL context
flavors.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Before this patch, intelInitScreen2 set DRIScreen::api_mask with the hacky
heuristic below:
if (gen >= 3)
api_mask = GL | GLES1 | GLES2;
else
api_mask = 0;
This hack was likely broken on gen2 (i830), but I don't care enough to
properly investigate. It appears that every EGLConfig on i830 has
EGL_RENDERABLE_TYPE=0, and thus eglCreateContext will never succeed.
Anyway, moving on to living drivers...
With the arrival of EGL_OPENGL_ES3_BIT_KHR, this heuristic is now
insufficient. We must enable the GLES3 bit if and only if the driver is
capable of creating a GLES3 context. This requires us to determine the
maximum supported context version supported by the hardware/driver for
each api *during initialization of intel_screen*.
Therefore, this patch adds four new fields to intel_screen which indicate
the maximum supported context version for each api:
max_gl_core_version
max_gl_compat_version
max_gl_es1_version
max_gl_es2_version
The api mask is now correctly set as:
api_mask = GL;
if (max_gl_es1_version > 0)
api_mask |= GLES1;
if (max_gl_es2_version > 0)
api_mask |= GLES2;
Tested against gen6 with piglit egl-create-context-verify-gl-flavor.
Verified that this patch does not change the set of exposed EGL context
flavors.
v2:
- Replace the if-tree on gen with a switch, for Ian.
- Unconditionally enable the DRI_API_OPENGL bit, for Ian.
v3:
- Drop max gl version to 1.4 on gen3 if !has_occlusion_query,
because occlusion queries entered core in 1.5. For Ian.
v4:
- Drop ES2 version back to 2.0 due to rebase (Ian).
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick.intel.com>
I'm not sure if this is the correct fix. The
_mesa_es_error_check_format_and_type function (used above in the ES 1
and 2 cases) was originally added for glTexImage checking and allows
GL_DEPTH_STENCIL/GL_UNSIGNED_INT_24_8 combinations. Using it in ES 3
causes other tests to regress.
Fixes es3conform's packed_depth_stencil_error test.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v1)
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
INVALID_ENUM is for when the type is simply not known.
Fixes part of es3conform's packed_depth_stencil_error test.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
ES 3 specifies some formats as texture-only (i.e., not available for
renderbuffers).
See the "Required Texture Formats" section (pg 126) of the ES 3 spec.
v2: Allow RED and RG float rendering in core profiles The check used to
be (version > 30) || (compat profile w/extensions). Just deleting
<version > 30) broke 3.0+ core profiles.
Fixes es3conform's color_buffer_unsupported_format test.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
According to both the GL 3.0 and ES 3.0 specifications (table 2.7 for GL
and table 2.8 for ES), the default value of BUFFER_ACCESS_FLAGS is
supposed to be zero.
Note that there are two related quantities: the obsolete BUFFER_ACCESS
enum and the new BUFFER_ACCESS_FLAGS bitfield.
BUFFER_ACCESS can only be GL_READ_ONLY, GL_WRITE_ONLY, or GL_READ_WRITE;
BUFFER_ACCESS_FLAGS can easily represent all three via GL_MAP_WRITE_BIT,
GL_MAP_READ_BIT, and their logical or. It also supports more flags.
Thus, Mesa only stores the bitfield, and simply computes the old enum
when queried, via simplified_access_mode(bufObj->AccessFlags).
The tricky part is that, while BUFFER_ACCESS_FLAGS defaults to 0,
BUFFER_ACCESS defaults to GL_READ_WRITE for desktop [GL 3.0, table 2.8]
and GL_WRITE_ONLY_OES for ES [the GL_EXT_map_buffer_range extension].
Mesa tried to implement this by setting the default AccessFlags to
GL_MAP_READ_BIT | GL_MAP_WRITE_BIT on desktop, and GL_MAP_WRITE_BIT on
ES. But in all specifications, it needs to be 0.
This patch moves that logic into simplified_access_mode(): when
AccessFlags == 0, it now returns GL_READ_WRITE for desktop and
GL_WRITE_ONLY for ES 1/2. (BUFFER_ACCESS doesn't exist on ES 3.0,
so it's irrelevant there.)
With that in place, it changes the AccessFlags default to 0.
Fixes three es3conform tsets:
- copy_buffer_defaults
- map_buffer_range_modify_indices
- pixel_buffer_object_default_parameters
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Perhaps most importantly, this patch adds comments quoting the relevant
spec paragraphs above each error condition.
It also makes three changes:
- For FBOs, GL_COLOR_ATTACHMENTm where m >= MaxDrawBuffers is supposed
to generate INVALID_OPERATION (not INVALID_ENUM).
- Constants that refer to multiple buffers (such as FRONT, BACK, LEFT,
RIGHT, and FRONT_AND_BACK) are supposed to generate INVALID_OPERATION,
not INVALID_ENUM.
- In ES 3.0, for FBOs, buffers[i] must be NONE or GL_COLOR_ATTACHMENTi
or else INVALID_OPERATION occurs. (This is a new restriction.)
Fixes es3conform's draw-buffers-api test.
v2: The error path was missing a "return" like all the other error
paths. Also, we may as well call it glDrawBuffers in the error message
since the ARB suffix doesn't exist in ES 3.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The specification requires that query results are processed in order, (when
one query result is returned, all previous query of the same type must also be
available). The implementation was failing this requirement in the case of
BeginQuery and EndQuery with no intervening drawing, (the result would be made
available immediately without flushing previous queries).
This fixes the following es3conform test:
occlusion_query_query_order
as well as the following piglit test:
occlusion_query_order
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This allows for avoiding the occlusion query erroneously accumulating results
during the meta operation. This functionality is made conditional on a new
MESA_META_OCCLUSION_QUERY bit so that meta-operations which should generate
fragments can continue to get the current behavior.
The implementation of glClear is specifically augmented to request the flag
since glClear is specified to not generate fragments.
This fixes the following es3conform tests:
occlusion_query_draw_occluded.test
occlusion_query_clear
occlusion_query_custom_framebuffer
occlusion_query_stencil_test
occlusion_query_discarded_fragments
As well as the following piglit test:
occlusion_query_meta_no_fragments
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This flag allows for the specified behavior that GenQueries reserves a name,
but does not associate an object with it until BeginQuery. We allocate the
object immediately with the new EverBound flag set to false, and then set the
flag to true at the time of BeginQuery.
This allows us to implement a conformant IsQuery function by checking the
state of the new EverBound flag.
This fixes the following es3conform tests:
occlusion_query_genqueries
occlusion_query_is_query_nonzero
and the following piglit test:
occlusion_query_lifetime
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The reference to "correct, see spec" was a bit too vague to be useful,
(particularly since the language being referenced here changes between OpenGL
3.1 and OpenGL 4.3).
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
These are optimizations which make MSAA a lot faster.
The MSAA work is complete with this commit. (except for enablement of AA
optimizations for RGBA16F, for which a patch is ready and waiting until
the kernel CS checker fix lands)
MSAA can't be made any faster as far as hw programming is concerned.
The catch is only one process and one colorbuffer can use the optimizations
at a time. There usually is only one MSAA colorbuffer, so it shouldn't be
an issue.
Also, there is a limit on the size of MSAA colorbuffer resolution in terms
of megapixels. If the limit is surpassed, the AA optimizations are disabled.
The limit is:
- 1 Mpix on low-end and some mid-level chipsets (1024x768 and 1280x720)
- 2 Mpix on some mid-level chipsets (1600x1200 and 1920x1080)
- 3 or 4 Mpix on high-end chipsets (2048x1536 or 2560x1600, respectively)
It corresponds to the number of raster pipes (= GB pipes) available, each pipe
can hold 1 Mpix of AA compression data.
If it's enabled, the driver prints to stdout:
radeon: Acquired access to AA optimizations.
This reverts commit 4148a29ed8.
This is a work-around for bug:
https://bugs.freedesktop.org/show_bug.cgi?id=59334
We really should be linking against libgallium.la instead of
libgallium.a, but until we can figure why linking against libgallium.la
causes runtime failures in clover we will continue to link against
libgallium.a
Acked-by: Andreas Boll <andreas.boll.dev@gmail.com>
Tested-by: Aaron Watry <awatry@gmail.com>
I think the conditional always evaluates to false.
If I understand the code in core Mesa correctly, depthBits or stencilBits
is 0 if the depth or stencil renderbuffer is NULL, respectively.
Reviewed-by: Brian Paul <brianp@vmware.com>
Since automake changes, softpipe and llvmpipe are mutually exclusive at link
time. This doesn't make much sense to me as we can choose between them at
run-time using GALLIUM_DRIVER.
Creating library file: .libs/libGL.dll.a
.libs/xlib.o: In function `sw_screen_create_named':
/jhbuild/checkout/mesa/mesa/src/gallium/targets/libgl-xlib/../../../../src/gallium/auxiliary/target-helpers/inline_sw_helper.h:35:
undefined reference to `_softpipe_create_screen'
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Brian Paul <brianp@vmware.com>
Call Driver.AllocTextureImageBuffer rather than calling
Driver.TexImage with NULL data, format=GL_NONE and type=GL_NONE.
This avoids setting ctx->Unpack, which can lead to incorrectly
trying to upload data.
The GLES3 GTF program's packed_pixels_pbo test was triggering
an error for i965 with the previous code.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This function checks for ES3 compatible
format/type/internalFormat/dimension combinations.
[jordan.l.justen@intel.com: additional tweaks for gles3-gtf]
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Fixes a runtime error:
glxgears: symbol lookup error: /home/brian/mesa/lib/gallium/libGL.so.1: undefined symbol: clock_gettime
v2: use $(CLOCK_LIB) and $(PTHREAD_LIBS) per Andreas Boll.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Andreas Boll <andreas.boll.dev@gmail.com>
The hardware does not support a render target without an alpha channel.
So when the user creates a render buffer with no alpha channel, there actually
is storage available for alpha internally. It requires special care to
avoid these unwanted alpha bits from causing any problems.
Specifically, when blending, and when the blend factors would read the
destination alpha values, this commit coerces the blend factors to instead be
either 0 or 1 as appropriate.
A similar fix was made for pre-gen6 hardware in commit eadd9b8e and this
commit shares the fixup function written by Ian then.
This commit the following es3conform test:
rgb8_rgba8_rgb
As well as the following piglit (sub) tests:
EXT_framebuffer_object/fbo-blending-formats/3
EXT_framebuffer_object/fbo-blending-formats/GL_RGB
EXT_framebuffer_object/fbo-blending-formats/GL_RGB8
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
We used to keep the color buffers in the dri_buffers array and
swap __DRI_BUFFER_BACK_LEFT and __DRI_BUFFER_FRONT_LEFT around there
and swap third_buffer in in case we needed to triple buffer. That
gets a little fidgety with all the swaps, so lets use the
color_buffers pool like the gbm platform does. We track the color buffers,
their corresponding wl_buffer and locked status here and just plug
a free one into dri2_surf->buffers when we need to.
This is a nice clean-up in itself, but it also sets us up to track
buffer age in the color_buffers structs.
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
RB3D_DEBUG_CTL doesn't help, so I resolve to a tiled temporary texture and
then blitting it to the destination one, which we also do in other situations.
The handling of the CAP is broken in st/mesa anyway. Let's just kill it.
This commit pretty much enables fast Z clear for FBOs with Z24S8.
The driver falls back to clearing with a quad if the fast clear cannot be
used. It can still do fast color clear, for example.
Effectively this path would always assert. Move the break statement to
the (probable) intended place.
Note: This is a candidate for the stable branches.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Include LLVM_LDFLAGS when building with LLVM. Fixes the following build
errors:
CXXLD swrast_dri.la
/usr/bin/ld: cannot find -lLLVMR600CodeGen
/usr/bin/ld: cannot find -lLLVMR600Desc
/usr/bin/ld: cannot find -lLLVMR600Info
/usr/bin/ld: cannot find -lLLVMR600AsmPrinter
Reviewed-by: Andreas Boll <andreas.boll.dev@gmail.com>
According to bug #54524, I regressed oglconform's multicontext test
when I reenabled the fragment shader precompile.
However, these test cases only passed by miraculous coincedence. We
assign each fragment program a unique ID (brw_fragment_program::id which
becomes brw_wm_prog_key::program_string_id) which we obtain by storing a
per-context counter.
The test case uses GLX context sharing to access the same fragment
program from two different contexts. This means that we share a program
cache. Before the precompile, if both contexts happened to use the same
shaders in the same order, we'd obtain the same program_string_ids (by
virtue of doing the same computation twice). However, the more likely
scenario is that they completely disagree on program_string_id.
This meant that we'd have two completely different fragment shaders in
the cache with the same ID, tricking us to think they were the same
(aside from NOS), so we'd render using the wrong program.
This patch implements a simple fix suggested by Eric: it moves the
global counter out of brw_context and into intel_screen, which is shared
across all contexts. A mutex protects it from concurrent access.
This is also the first direct usage of pthreads in the i965 driver.
Fixes 10 subcases of oglconform's multicontext test.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54524
Reviewed-by: Eric Anholt <eric@anholt.net>
Technically, variable sized arrays are a required feature of C99,
redacted to be optional in C11, and not actually part of C++ whatsoever.
Gcc allows using them in C++ unless you specify -pedantic, and Clang
appears to allow them for simple/POD types.
exec_list is arguably POD, since it doesn't have virtual methods, but I
can see why Clang would be like "meh, it's a C++ struct, say no", seeing as
it's meant to support C99.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58970
Reviewed-by: Matt Turner <mattst88@gmail.com>
The simulator gets very angry about our i2b code:
cmp.ne(16) g3<1>D g2<0,1,0>D 0F
We can't mix integer DWord and float types. The only reason to use 0F
here was to share code with f2b. Split it and use 0D instead.
While we don't believe anything bad will actually happen because of
this, it's nice to fix the warnings and easy enough to do.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Often when debugging, I don't want to see SIMD16 shaders. It makes
INTEL_DEBUG=vs/fs output much easier to read, especially when a program
dumps many shaders. Plus, I also want to verify that SIMD8 works before
even considering SIMD16.
v2: Fix the likeliness check (caught by Chris and Eric).
Reviewed-by: Eric Anholt <eric@anholt.net>
Choose MESA_FORMAT_ARGB2101010 when storing
GL_RGBA + GL_UNSIGNED_INT_2_10_10_10_REV or
GL_RGB + GL_UNSIGNED_INT_2_10_10_10_REV.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The ARB_get_program_binary spec says "OpenGL 3.0 is required." The
nearly identical OES_get_program_binary extension is available for
OpenGL ES 2.0, so I don't see how / why OpenGL 3.0 is a requirement for
the ARB version. Let's just enable whenever GL_ARB_shader_objects is
available.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
After recent changes in the XML, the dispatch generators will expect
this function to be named _mesa_ProgramParameteri.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
There were two bugs here. First, this and several other queries were
not available in a desktop GL context with GL_ARB_ES2_compatibility.
Second, GL_NUM_SHADER_BINARY_FORMATS returns zero, but
GL_SHADER_BINARY_FORMATS writes one element of data to the buffer. If
NUM is zero, no data should be written.
Fixes piglit test 'arb_get_program_binary-overrun shader'.
NOTE: This is a candidate for stable release branches.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This adds TBO support to r600g, and with GLSL 1.40 enabled,
we now get 3.1 core profiles advertised for r600g.
The r600/700 implementation is a bit different from the evergreen one,
as r6/7 hw lacks vertex fetch swizzles. So we implement it by passing 5
constants per sampler to the shader, the shader uses the first 4 as masks
for each component and the 5th as the alpha value to OR in.
Now TXQ is also broken so we have to pass a constant for the buffer size,
on evergreen we just pass this, on r6/7 we pass it as the 6th element
in the const info buffer.
v1.1: drop return as DDX doesn't use a texture type
v2: add r600/700 support.
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds 12 more constant buffers for use as UBOs,
along with adding relative constant fetching for 2D indices.
This with GLSL 1.40 enabled passes all the same tests as softpipe
on my evergreen system.
Signed-off-by: Dave Airlie <airlied@redhat.com>
First we test that line continuations are honored within a comment, (as
recently changed in glcpp), then we test that line continuations can be
disabled via an option within the context. This is tested via the new support
for a test-specific command-line option passed to glcpp.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously, we were only supporting line-continuation backslash characters
within lines of pre-processor directives, (as per the specification). With
OpenGL 4.2 and GLES3, line continuations are now supported anywhere within a
shader.
While changing this, also fix a bug where the preprocessor was ignoring
line continuation characters when a line ended in multiple backslash
characters.
The new code is also more efficient than the old. Previously, we would
perform a ralloc copy at each newline. We now perform copies only at each
occurrence of a line-continuation.
This commit fixes the line-continuation.vert test in piglit.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This will allow testing of disabled line-continuation on a case-by-case basis,
(with the option communicated to the preprocessor via the GL context).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This will allow the test exercising disabled line continuations to arrange
for the --disable-line-continuations argument to be passed to the standalone
glcpp.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
As the preprocessor becomes more sophisticated and gains more optional
behavior, it's easiest to just pass the GL context pointer to it so that
it can examine any fields there that it needs to (such as API version,
or the state of any driconf options, etc.).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This application is known to contain shaders that:
1. Have a stray backslash as the last line of comment lines
2. Have a declaration immediately following that line
Hence, interpreting that backslash as a line continuation causes the
declaration to be hidden and the shader fails to compile. Fortunately, the
shaders also:
3. Do not have any other intentional line-continuation characters
So disabling line continuations entirely for the application fixes this
problem without causing any other breakage.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This is to enable a quirk for Savage2 which includes a shader with a stray '\'
at the end of a comment line. Interpreting that backslash as a line
continuation will break the compilation of the shader, so we need a way to
disable this.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously this was happening unconditionally, leading to some excessive
rebuilding/relinking during builds.
Note that the .po files are not automatically updated due to changes to the
t_options.h file. Instead, translators should continue to use "make po"
manually. This is because after new strings are merged into the existing .po
file, manual work is still required by translators to ensure that the
translations are correct.
Previously, the xmlpool directory had a lone Makefile to assist poeple in
manually invoking a deep make in order to update the translations in
options.h. We can observe that this wasn't happening in fact, (new
translations had been added to de.po without being generated into options.h,
and new options had been manually added directly to options.h rather than to
t_options.h).
Prevent both of these problems from occurring in the future by automatically
generating options.h as part of the standard build of mesa.
For this, the generated options.h is now removed from version control, (along
with Makefile in favor of Makefile.am).
[chadv: Port the Autotools changes to Android.]
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
As can be seen, many other translation strings already include a single
apostrophe just fine without any escaping. This strangely-escaped apostrophe
was causing a build failure ("invalid escape sequence") resulting in no "de"
translations in the final options.h file.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The gen_xmlpool.py script would work correctly only when executed from the
directory that contained the script. This shortcoming was due to some
hard-coded paths in the script.
In order to easily invoke the script from the Android build system, we
must be able to execute the script from an arbitrary directory. To enable
that, this patch replaces the two hard-coded paths with new command line
arguments.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Carl Worth <cworth@cworth.org>
These translations have existed in the de.po file, but were not in the
generated options.h file. This was fixed by simply running "make options.h".
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
For the last two most-recently-added driconf options, their definition was
manually added to options.h, a file which is intended to be automatically
generated, (as part of support for translated driconf option
descriptions). This means that these options would be eliminated if the
generation step were performed again.
Fix this by correctly adding the definitions of these options to t_options.h,
(the file used as input to the generator), and not the options.h file, which
is generated.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This fixes several duplicate symbol errors.
libllvmradeon is a simple helper library. If it requires symbols in
other libraries, this should be taken care of by the gallium target that
uses it (e.g. libr600.la)
This requires some derived state. The cut vertex used is either the
value specified by glPrimitiveRestartIndex or it's hard-coded to ~0.
The derived state gl_array_attrib::_RestartIndex captures this value.
In addition, the derived state gl_array_attrib::_PrimitiveRestart is set
whenever either gl_array_attrib::PrimitiveRestart or
gl_array_attrib::PrimitiveRestartFixedIndex is set.
v2: Use _mesa_is_gles3.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
The GLSL ES 3.0 spec (Section 12.17) says:
"GLSL ES 1.00 removed token pasting and other functionality."
NOTE: This is a candidate for the stable branches.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Carl Worth <cworth@cworth.org>
Simply emitting a nicely-formatted error message if any undefined macro is
encountered in a parser context expecting an expression.
With this commit, the following piglit test now passes:
spec/glsl-es-3.00/compiler/undefined-macro.vert
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This can be triggered either by creation of a GLES context (with
api == API_OPENGLES2) or else by a #version directive with version
value 100 or with a string of "es" following the version value.
There's no behavioral change with this commit—just preparation for ES-specific
behavior in the preprocessor in the future.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Fixes the following build error:
CXXLD egl_gallium.la
g++: error: ../../../../src/egl/wayland/wayland-drm/.libs/.libs/libwayland-drm.a: No
such file or directory
Reviewed-by: Andreas Boll <andreas.boll.dev@gmail.com>
We get int/uint clear color value in this case, and util_pack_color can't
handle these formats at all (even if it could, float input color isn't what
we want).
Pass through the color union appropriately and handle the packing ourselves
(as I couldn't think of a good generic util solution).
This gets piglit fbo_integer_precision_clear and
fbo_integer_readpixels_sint_uint from the ext_texture_integer test group from
segfault to pass (which only leaves fbo-blending from that group not working).
v2: fix up comments
Need to bitcast the float border color (luckily we already get
the color as int just disguised as float).
Fixes piglit texwrap GL_EXT_texture_integer bordercolor.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Change the texel type to int/uint instead of float throughout the sampling
code which makes it easier to catch errors (as llvm will complain about wrong
types if we mistakenly treat these values as real floats somewhere).
This should also get things like e.g. sampler swizzles (for unused channels)
right.
This fixes piglit texture_integer_glsl130 test.
Border color not working (crashing) yet.
(These formats are not exposed yet in llvmpipe.)
v2: couple cleanups according to José's comments
Reviewed-by: José Fonseca <jfonseca@vmware.com>
C++ linking (controlled by the nodist_EXTRA idiom) is needed
unconditionally for:
nouveau (uses C++ in the driver)
r300 (since LLVM is always required)
radeonsi (since LLVM is always required)
swrast (if builting LLVM pipe)
and conditionally (depends whether LLVM is enabled) for
i915
r600
vmwgfx
and never needed for swrast (softpipe).
Unfortunately, automake seems to *always* link with C++ if nodist_EXTRA
is specified, even inside a false conditional. Not sure if this is a
bug, but it does seem to be weird behavior.
v2: Johannes Obermayr <johannesobermayr@gmx.de>
- Fix some undefined symbols.
v3: Johannes Obermayr <johannesobermayr@gmx.de>
- Install pipe_* to $(libdir)/gallium-pipe.
v4: Johannes Obermayr <johannesobermayr@gmx.de>
- Build it only once on --enable-gallium-gbm / --enable-opencl.
v2: Andreas Boll <andreas.boll.dev@gmail.com>
- add missing xvmc state tracker to _LIBADD variable
v3: Andreas Boll <andreas.boll.dev@gmail.com>
- Provide compatibility with scripts for the old Mesa build system
v2: Andreas Boll <andreas.boll.dev@gmail.com>
- Add missing xvmc state tracker to _LIBADD variable
v3: Andreas Boll <andreas.boll.dev@gmail.com>
- Provide compatibility with scripts for the old Mesa build system
v2: Andreas Boll <andreas.boll.dev@gmail.com>
- Add missing xvmc state tracker to _LIBADD variable
v3: Andreas Boll <andreas.boll.dev@gmail.com>
- Provide compatibility with scripts for the old Mesa build system
v2: Andreas Boll <andreas.boll.dev@gmail.com>
- Add missing xvmc state tracker to _LIBADD variable
v3: Andreas Boll <andreas.boll.dev@gmail.com>
- Provide compatibility with scripts for the old Mesa build system
v2: Andreas Boll <andreas.boll.dev@gmail.com>
- Add missing vdpau state tracker to _LIBADD variable
v3: Andreas Boll <andreas.boll.dev@gmail.com>
- Provide compatibility with scripts for the old Mesa build system
v2: Andreas Boll <andreas.boll.dev@gmail.com>
- Add missing vdpau state tracker to _LIBADD variable
v3: Andreas Boll <andreas.boll.dev@gmail.com>
- Provide compatibility with scripts for the old Mesa build system
v2: Andreas Boll <andreas.boll.dev@gmail.com>
- Add missing vdpau state tracker to _LIBADD variable
v3: Andreas Boll <andreas.boll.dev@gmail.com>
- Provide compatibility with scripts for the old Mesa build system
v2: Andreas Boll <andreas.boll.dev@gmail.com>
- Add missing vdpau state tracker to _LIBADD variable
v3: Andreas Boll <andreas.boll.dev@gmail.com>
- Provide compatibility with scripts for the old Mesa build system
v2: Andreas Boll <andreas.boll.dev@gmail.com>
- Add missing vdpau state tracker to _LIBADD variable
v3: Andreas Boll <andreas.boll.dev@gmail.com>
- Provide compatibility with scripts for the old Mesa build system
v2: Johannes Obermayr <johannesobermayr@gmx.de>
Fix some undefined symbols.
v3: Johannes Obermayr <johannesobermayr@gmx.de>
Build it -shared to fix egl_gallium.so on r600/radeonsi builds.
The function was named badly and wasn't in the dispatch table,
making it hard to find.
Fixes transform_feedback2_states and gets a few other transform
feedback tests closer to working in es3conform.
Reviewed-by Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
For glGetIntegerv, add support for the following in an OpenGL ES 3.0
context:
GL_MAJOR_VERSION
GL_MINOR_VERSION
GL_NUM_EXTENSIONS
See Table 6.29 of the OpenGL ES 3.0 spec.
Fixes error GL_INVALID_ENUM in piglit egl-create-context-verify-gl-flavor,
testcase for OpenGL ES 3.0.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v1)
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
The ES 3 spec says that the minumum allowable value is 2^24-1, but the
GL 4.3 and ARB_ES3_compatibility specs require 2^32-1, so return 2^32-1.
Fixes es3conform's element_index_uint_constants test.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
From GL/GLES/GL_CORE and GLES2 -> GL/GL_CORE/GLES2.
Yes, we really were exposing ES2_compatibility queries on ES 1.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Fixes the transform_feedback2_init_defaults test from es3conform.
The ES 3 spec lists these as TRANSFORM_FEEDBACK_PAUSED and
TRANSFORM_FEEDBACK_ACTIVE.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
but an MSAA resource is bound. This effectively makes the MSAA disable switch
not affect rasterization, but it still affects the alpha-to-one and
alpha-to-coverage states. This hardware just lacks a proper MSAA disable
switch.
This fixes graphics corruption in sauerbraten.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59194
In most cases, the width, height, and depth of the physical surface
used by the driver to implement a texture or renderbuffer is equal to
the logical width, height, and depth exposed to the client through
functions such as glTexImage3D(). However, there are two exceptions:
cube maps (which have a physical depth of 6 but a logical depth of 1)
and multisampled renderbuffers (which have larger physical dimensions
than logical dimensions to allow multiple samples per pixel).
Previous to this patch, we accounted for the difference between
physical and logical surface dimensions at inconsistent places in the
call graph (multisampling was accounted for in
intel_miptree_create_for_renderbuffer(), and cubemaps were accounted
for in intel_miptree_create_internal()). As a result, it wasn't
always clear, when calling a miptree creation function, whether
physical or logical dimensions were needed. Also, we weren't
consistent about storing logical dimensions in the intel_mipmap_tree
structure (we only did so in the
intel_miptree_create_for_renderbuffer() code path, and we did not
store depth).
This patch refactors things so that intel_miptree_create_internal() is
responsible for converting logical to physical dimensions and for
storing both the physical and logical dimensions in the
intel_mipmap_tree structure. As a result, all miptree creation
functions interpret their arguments as logical dimensions, and both
physical and logical dimensions are always available to functions that
work with intel_mipmap_trees.
In addition, it renames the fields in intel_mipmap_tree used to store
the dimensions, so that it is clear from the name whether physical or
logical dimensions are being referred to.
This should fix the following bugs:
- When creating a separate stencil surface for a depthstencil cubemap,
we would erroneously try to convert the depth from 1 to 6 twice,
resulting in an assertion failure.
- When creating an MCS buffer for compressed multisampling, we used
physical dimensions instead of logical dimensions, resulting in
wasted memory.
In addition, this should considerably simplify the implementation of
ARB_texture_multisample, because it moves the code to compute the
physical size of multisampled surfaces out of renderbuffer-only code.
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
This allows intel_miptree_alloc_mcs() to force Y tiling for the MCS
buffer. Previously we accomplished this by the hack of passing
INTEL_MSAA_LAYOUT_CMS as the msaa_layout parameter, but that parameter
is going to be going away soon.
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
No functional change. This patch moves the compute_msaa_layout()
function earlier in intel_mipmap_tree.c so that it can be used by
other functions in that file.
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
I erroneously added this back in January 2011 in commit 88421589.
Looking at the commit message, I have no idea why I added it. It only
added non-array structure fields to the symbol table, so array structure
fields are treated correctly.
Fixes piglit tests structure-and-field-have-same-name.vert and
structure-and-field-have-same-name-nested.vert. It should also fix
WebGL conformance tests shader-with-non-reserved-words.
NOTE: This is a candidate for the stable release branches.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=57622
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
R6xx doesn't work - the issue seems to be with flushing (sometimes
the destination buffer contains garbage). There are no hangs, so we're good.
R7xx doesn't seem to have any alignment restriction despite our initial
thinking. Everything just works.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch enhances the varying packing code so that flat varyings of
uint, int, and float types can be packed together.
We accomplish this in lower_packed_varyings.cpp by making the type of
all flat varyings ivec4, and then using information-preserving type
conversions (e.g. ir_unop_bitcast_f2i) to convert all other types to
ints.
The varying_matches::compute_packing_class() function is updated to
reflect the fact that varying packing no longer needs to segregate
varyings of different base types.
Fixes piglit test varying-packing-mixed-types.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2: Split lower_packed_varyings_visitor::bitwise_assign into
pack/unpack variants.
The GLSL 1.30 spec only allows vertex shader outputs and fragment
shader inputs ("varyings" in pre-GLSL-1.30 parlance) to be of type
int, uint, float, or vectors, matrices, or arrays thereof. Bools,
bvec's, and structs are prohibited. (Integral varyings were
prohibited prior to GLSL 1.30).
Previously, Mesa only performed this check on variables declared with
the "varying" keyword, and it always performed the check according to
the pre-GLSL-1.30 rules. As a result, bools and structs were allowed
to slip through, provided they were declared using the new in/out
syntax.
This patch modifies the error check so that it occurs after "varying"
is converted to "in/out", and corrects it to properly account for GLSL
version.
Fixes piglit tests:
in-bool-prohibited.frag
in-bvec2-prohibited.frag
in-bvec3-prohibited.frag
in-bvec4-prohibited.frag
in-struct-prohibited.frag
out-bool-prohibited.vert
out-bvec2-prohibited.vert
out-bvec3-prohibited.vert
out-bvec4-prohibited.vert
out-struct-prohibited.vert
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This patch adds logic to allow the ast_to_hir function
apply_type_qualifier_to_variable() to tell whether it is acting on a
variable declaration or a function parameter. This will allow it to
correctly interpret the meaning of "out" and "in" keywords (which have
different meanings in those two contexts).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
linker.cpp is getting pretty big, and we're about to add even more
varying packing code, so split out the linker code that concerns
varyings to its own file.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously this macro existed in 3 separate places, some inside the
intel driver and some outside of it. It makes more sense to have it
in main/macros.h
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
When analyzing a loop where the loop condition is expressed in the
non-standard order (e.g. "4 > i" instead of "i < 4"), we were
reversing the condition incorrectly, leading to a loop bound that was
off by 1.
Fixes piglit tests {vs,fs}-loop-bounds-unrolled.shader_test.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Haswell and later support the GL_FIXED and 2_10_10_10_rev vertex formats
natively, and don't need shader workarounds.
Reviewed-by: Eric Anholt <eric@anholt.net>
* We have a symbol conflict as rtasm in
Mesa collides with rtasm in gallium.
* As us linking gallium and mesa together
is an edge case, lets just omit the rtasm
code from Mesa as we should be going
llvmpipe soon :)
This is not as optimized as r600g - the MSAA compression is missing,
so r300g needs a lot of bandwidth (more than r600g to do the same thing).
However, if the bandwidth is not an issue for you, you can enjoy this
unoptimized MSAA support.
The only other missing optimization for MSAA is the fast color clear.
MSAA is enabled on r500 only, because that's the only GPU family I tested.
That said, MSAA should work on r300 and r400 as well (but you must set
RADEON_MSAA=1 to allow it, then turn MSAA on in your app or set GALLIUM_MSAA=n,
n >= 2, n <= 6)
I will enable the support by default on r300-r400 once someone (other than me)
tests those chipsets with piglit.
The supported modes are 2x, 4x, 6x.
The supported MSAA formats are RGBA8, BGRA8, and RGBA16F (r500 only).
Those 3 formats are used for all GL internal formats.
Tested with piglit. (I have ported all MSAA tests to GL2.1)
Fixes this build error on platforms not using GNU indent.
indent: Command line: ``-T'' requires a parameter
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
v2: Move {RED,RG,RGB,RGBA}_SNORM changes from the previous commit to
this commit. Based on suggestions from Ken.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
The OpenGL 3.2 core profile spec says:
"The following base internal formats from table 3.11 are
color-renderable: RED, RG, RGB, and RGBA. The sized internal formats
from table 3.12 that have a color-renderable base internal format
are also color-renderable. No other formats, including compressed
internal formats, are color-renderable."
The OpenGL 3.2 compatibility profile spec says (only ALPHA is added):
"The following base internal formats from table 3.16 are
color-renderable: ALPHA, RED, RG, RGB, and RGBA. The sized internal formats
from table 3.17 that have a color-renderable base internal format
are also color-renderable. No other formats, including compressed
internal formats, are color-renderable."
Table 3.12 in the core profile spec and table 3.17 in the compatibility
profile spec list SNORM formats as having a base internal format of RED,
RG, RGB, or RGBA. From this we infer that they should also be color
renderable.
The OpenGL ES 3.0 spec says:
"An internal format is color-renderable if it is one of the formats
from table 3.12 noted as color-renderable or if it is unsized format
RGBA or RGB. No other formats, including compressed internal
formats, are color-renderable."
In the OpenGL ES 3.0 spec, none of the SNORM formats have "color-
renderable" marked in table 3.12. The RGB I and UI formats also are not
color-renderable in ES3, but we'll save that change for another patch.
Both NVIDIA's closed-source driver (version 304.64) and AMD's
closed-source driver (Catalyst 12.6 on HD 3650) reject *all* SNORM
formats for renderbuffers in OpenGL 3.3 compatibility profiles.
v2: Move {RED,RG,RGB,RGBA}_SNORM changes from the this commit to the
next commit. Based on suggestions from Ken.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
This code now lives in an external tree.
For the next Mesa release fetch the code from the master branch
of this LLVM repo:
http://cgit.freedesktop.org/~tstellar/llvm/
For all subsequent Mesa releases, fetch the code from the official LLVM
project:
www.llvm.org
- skip the vertex buffer reallocation in flush and just use
the unsynchronized flag to get new memory.
- remove the cruft needed to get around the issues with the vertex buffer
reallocation in flush
- use pb_buffer instead of pipe_resource
This patch fixes intel_miptree_unmap_etc() (which decompresses ETC
textures to linear) to pay attention to map->x and map->y when writing
to the destination image. Previously these values were ignored,
causing the xoffset and yoffset parameters passed to
glCompressedTexSubImage2D() to be ignored.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
- We should use a 3D transfer of size Width x 1 x NumLayers.
- We should use layer_stride instead of stride.
(even though they are likely to be equal with 1D array textures)
Reviewed-by: Brian Paul <brianp@vmware.com>
There was the fast path based on _mesa_format_matches_format_and_type
for GetTexImage, but it never worked, because the Mesa format we were testing
there was always compressed. Further testing showed that the fast path
had been completely broken.
In this commit, the somewhat limited helper util_create_rgba_texture is
no longer used and instead, custom code for the texture creation is added,
which tries to find the best matching RGBA8 format, so that we can hit
the fast path *always* if the read format is a variant of RGBA8 and supported
by the driver.
Reviewed-by: Brian Paul <brianp@vmware.com>
Usage with pipe_context:
pipe->flush(pipe, NULL, PIPE_FLUSH_END_OF_FRAME);
Usage with st_context_iface:
st->flush(st, ST_FLUSH_END_OF_FRAME, NULL);
The flag is only a hint for drivers. Radeon will use it for buffer eviction
heuristics in the kernel (e.g. for queries like how many frames have passed
since a buffer was used).
The flag is currently only generated by st/dri on SwapBuffers.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Automake 1.13 creates a bunch of new build artefacts:
- bin/test-driver, a script for running tests.
- *.trs files for every "make check" test result.
- *.log files containing the output of every test run by "make check".
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Every generation except Gen7 creates SURFACE_STATE entries via a
uint32_t array. Only Gen7 uses the older bitfield structure, which we
moved away from because it was less efficient. Convert it for
consistency.
This reduces the compiled size of gen7_wm_surface_state.o by 2.86% in a
release build.
v2: Fix accidental use of BRW_SURFACE_WIDTH/HEIGHT in brw_state_dump.c;
switch back to gen7_set_surface_mcs_info setting surf[6] directly
(both per Eric's review comments).
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Since wl_display_dispatch_queue() returns the number of processed events
or -1 on error, only cancel the roundtrip if an -1 is returned.
This also fixes a potential memory corruption bug happening when the
roundtrip does an early return and the callback later writes to the then
out of scope stack allocated `done' parameter.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
In Jelly Bean, the interface to ANativeWindow changed. The change included
adding a new parameter the queueBuffer and dequeueBuffer methods,
removing the lockBuffer method, and requiring libsync.
v2:
- s/fence_fd == -1/fence_fd != -1/
- Fix leak. Close the fence_fd.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Define the following Make variables:
MESA_ANDROID_MAJOR_VERSION
MESA_ANDROID_MINOR_VERSION
MESA_ANDROID_VERSION
These variable will allow us to make version-dependent decisions on
library dependencies. In particular, building Mesa against JellyBean will
require libsync.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Commit f22d49de added the SamplerParamter* functions but only used
ASSERT_OUTSIDE_BEGIN_END inside the -f and -fv versions.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This patch adds functionality to Mesa to upload compressed
2-dimensional array textures, using the glCompressedTexImage3D and
glCompressedTexSubImage3D calls.
Fixes piglit tests "EXT_texture_array/compressed *" and "!OpenGL ES
3.0/ext_texture_array-compressed_gles3 *". Also partially fixes GLES3
conformance test "CoverageES30.test".
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The old error reporting was completely bogus, passing _mesa_error() a
format string that didn't even match the remaining arguments. Also,
in many cases the number of dimensions in the TexImage call was not
preserved in the error message (e.g. an error in glTexImage2D was
reported simply as an error in glTexImage).
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
If the call fails, we should return NULL from XMesaCreateVisual().
This was found when Waffle tried to create a visual with depth/stencil
bits = -1. That's an illegal value for glXChooseFBConfig() and we should
return NULL in that situation.
Note: This is a candidate for the stable branches.
Dungeon Defenders hits TexImage()'s try_pbo_upload() path where
image->Width == 2, which doesn't meet intelEmitCopyBlit's requirement
that the pitch needs to be a multiple of 4.
Since intelEmitCopyBlit can already fail for a myriad of other reasons,
and it's not clear that other callers are immune to this failure mode,
simply make it return false rather than assert.
Fixes Dungeon Defenders on i965/Ivybridge. Now playable (aside from
having to work around the EXT_bindable_uniform issue).
NOTE: This is probably a candidate for the 9.0 branch.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
We don't need them now that our set of parameter pointers points at the
GL core storage for them. This should save memory/bandwidth/overhead in
uniform updates.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
NumParameters used to be an upper bound on the number of vec4s to be
uploaded, which was basically safe (unless your buffer was bound near
the top of address space *and* you array indexed outside the buffer, in
which case I think you might GPU hang). As I migrate the driver away
from ParameterValues[], this is no longer true.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Like in the FS, there's no reason to use an external copy if the
ParameterValues[] relayout of it isn't the layout we need.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
If adding scale parameters during program compile caused a realloc of
ParameterValues, then the driver uniform storage set up by
_mesa_associate_uniform_storage() would point to potentially freed
memory.
Note that this uses TexturesUsed, which may change at runtime for GLSL
when sampler uniforms change. This is a flaw in our handling of texrect
in general, and not one I'm fixing currently.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We don't have native hardware support for these, so they get promoted to
RGBA, in which case we don't have hardware dealing with the channel
swizzling for us.
Fixes piglit EXT_texture_snorm/texwrap formats bordercolor (-swizzled).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
I had left this out for a long time because it regressed some
depthstencil-render-miplevels cases when it was enabled. Now that the
bugs causing those are fixed, there's nothing stopping us.
Improves glbenchmark 2.1 offscreen performance by 7.3% +/- 2.8% (n=10).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This worked out before because the parent was always 4 bytes so it
didn't affect the layout, but now we want to support Z16 too.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Fixing these rendering bugs has been implicated in performance
regressions (which may be unfixable), but at least knowing that it's
happening should help diagnose those regressions.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The ETC1 changes failed at this, so let's make sure it will be caught in
testing next time.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This was caught by the assertion in the next commit. It fixes the
remaining piglit depthstencil-render-miplevels cases, probably by
avoiding broken stencil copies in the validation path.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Relayout is expensive, so it's something developers (both us and others)
should know about when it happens.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Rename existing _Used flag to EverBound.
The GL 4.3 and ES 3.0 specs say
These names are marked as used, for the purposes of GenVertexArrays
only, but they do not acquire array state until they are first bound.
This also affects Apple VAOs, which is fine since the
APPLE_vertex_array_object spec says
A vertex array object is created by binding an unused name. This
binding is accomplished by calling BindVertexArrayAPPLE with id set
to the name of the new vertex array object.
Fixes arb_vertex_array_object_isvertexarray.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The GL 4.3 an ES 3.0 specs say
A transform feedback object is created by binding a name returned by
GenTransformFeedbacks with the command
void BindTransformFeedback( enum target, uint id );
Fixes arb_transform_feedback2-istransformfeedback and part of
es3conform's CoverageES30.test.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
i.e. we have to allocate a temporary tiled resource if dst isn't tiled.
This fixes hardlocks on r6xx-r7xx, though using a linear resource is forbidden
on later asics as well.
NOTE: This is a candidate for the stable branches.
No piglit regressions and now passes glsl-uniform-out-of-bounds-2.
validate_uniform_parameters now checks that the array index is
valid. This means if an index is out of bounds, glGetUniform* now
fails with GL_INVALID_OPERATION, as it should.
_mesa_uniform and _mesa_uniform_matrix also call
validate_uniform_parameters so the bounds checks there became
redundant and were removed.
The test in glGetUniformLocation is modified to check array bounds
so it now returns GL_INVALID_INDEX (-1) if you ask for the location
of a non-existent array element, as it should.
Signed-off-by: Frank Henigman <fjhenigman@google.com>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
It's a build time option you need to set R600_TRACE_CS to 1 and it
will print to stderr all cs along as cs trace point value which
gave last offset into a cs process by the GPU.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
htile is used for HiZ and HiS support and fast Z/S clears.
This commit just adds the htile setup and Fast Z clear.
We don't take full advantage of HiS with that patch.
v2 really use fast clear, still random issue with some tiles
need to try more flush combination, fix depth/stencil
texture decompression
v3 fix random issue on r6xx/r7xx
v4 rebase on top of lastest mesa, disable CB export when clearing
htile surface to avoid wasting bandwidth
v5 resummarize htile surface when uploading z value. Fix z/stencil
decompression, the custom blitter with custom dsa is no longer
needed.
v6 Reorganize render control/override update mecanism, fixing more
issues in the process.
v7 Add nop after depth surface base update to work around some htile
flushing issue. For htile to 8x8 on r6xx/r7xx as other combination
have issue. Do not enable hyperz when flushing/uncompressing
depth buffer.
v8 Fix htile surface, preload and prefetch setup. Only set preload
and prefetch on htile surface clear like fglrx. Record depth
clear value per level. Support several level for the htile
surface. First depth clear can't be a fast clear.
v9 Fix comments, properly account new register in emit function,
disable fast zclear if clearing different layer of texture
array to different value
v10 Disable hyperz for texture array making test simpler. Force
db_misc_state update when no depth buffer is bound. Remove
unused variable, rename depth_clearstencil to depth_clear.
Don't allocate htile surface for flushed depth. Something
broken the cliprect change, this need to be investigated.
v11 Rebase on top of newer mesa
v12 Rebase on top of newer mesa
v13 Rebase on top of newer mesa, htile surface need to be initialized
to zero, somehow special casing first clear to not use fast clear
and thus initialize the htile surface with proper value does not
work in all case.
v14 Use resource not texture for htile buffer make the htile buffer
size computation easier and simpler. Disable preload on evergreen
as its still troublesome in some case
v15 Cleanup some comment and remove some left over
v16 Define name for bit 20 of CP_COHER_CNTL
Signed-off-by: Pierre-Eric Pelloux-Prayer <pelloux@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
This bring r600g allmost inline with closed source driver when
it comes to flushing and synchronization pattern.
v2-v4: history lost somewhere in outer space
v5: Fix compute size of flushing, use define for flags, update
worst case cs size requirement for flush, treat rs780 and
newer as r7xx when it comes to streamout.
v6: Fix num dw computation for framebuffer state, remove dead
code, use define instead of hardcoded value.
v7: Remove dead code
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Previously, Mesa code assumed that glReadBuffer(GL_NONE) was only
valid for user-created framebuffer objects. However, the spec is
quite clear that is should also be valid for the default framebuffer.
From section 18.2.1 ("Obtaining Pixels from the Framebuffer") of the
GL 4.3 spec:
"When READ_FRAMEBUFFER_BINDING is zero, i.e. the default
framebuffer, src must be one of the values listed in table 17.4,
including NONE."
Similar language exists in the GLES 3.0 spec, and in desktop GL all
the way back to ARB_framebuffer_object.
Partially fixes GLES3 conformance test "CoverageES30.test".
NOTE: This is a candidate for stable branches.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
It was slightly wrong: we were computing the longest duration of
the query among all the rasterizer tasks.
Regardless, for tile-based implementations such as llvmpipe, time differences
will never be very useful, because rendering before/during/after the query
is all interleaved. And this is expected, see ARB_timer_query spec, issue 10.
In particular, piglit ext_timer_query-time-elapsed still fails, because
it makes assumptions that don't hold true in in tiled architectures. Not
sure how to fix that though.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
ARB/EXT_timer_query's definition of GL_TIME_ELAPSED match precisely the
subtraction of two GL_TIMESTAMP queries.
And for a lot of drivers, that's precisely how they have to implement
internally -- by emitting two hardware timestamp queries.
So, to simplify driver implementation, simply allow doing so in the state
tracker.
Eventually if no driver implements PIPE_QUERY_TIME_ELAPSED then we could
retire it.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
The burst was incorrectly used, because ELEM_SIZE was always 0.
I don't know if the burst works, because I don't know of any test
which uses it.
NOTE: This is a candidate for the stable branches.
Reviewed-by: Dave Airlie <airlied@redhat.com>
The old call to tgsi_exec_machine_bind_shader() in
softpipe_delete_fs_state() was never called since the shader's original
tokens are never passed to the tgsi interpreter (only shader _variant_
tokens are). Now, unbind the variant's tokens from the tgsi interpreter
when we free the variant.
This doesn't fix any known bugs but it's the right thing to do.
Note: This is a candidate for the stable branches.
In exec_prepare() we were comparing pointers to see if the fragment
shader variant had changed before calling tgsi_exec_machine_bind_shader().
This didn't work reliably when there was a lot of shader token malloc/
freeing going on because the memory might get reused.
Instead, bind the shader variant during regular state validation.
Fixes http://bugs.freedesktop.org/show_bug.cgi?id=40404
(fixes a couple of piglit's glsl-max-varyings test)
Note: This is a candidate for the stable branches.
This force surface allocated from ddx to be consider as height
aligned on 8 and fix 1D->2D tiling transition that result from
this.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
brw_emit_vertices contains special case logic to handle the case where
a vertex shader doesn't read any inputs. This special case logic was
incorrectly activating in the case were the only vertex input is
gl_VertexID. As a result, if a shader used gl_VertexID but used no
other inputs, then all vertices got a gl_VertexID of zero.
Fixes oglconform test "ubo-usage advanced.transform_feedback".
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The rather unweildy logic for determining this condition was repeated
in a large number of places. This patch consolidates it to a single
inline function.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This patch implements the following behaviours, which are mandated by
the GL 4.3 and GLES3 specs.
1. Regarding the GL_TRANSFORM_FEEDBACK_BUFFER_SIZE query: "If the
... size was not specified when the buffer object was bound
(e.g. if it was bound with BindBufferBase), ... zero is returned."
(GL 4.3 section 6.7.1 "Indexed Buffer Object Limits and Binding
Queries").
2. "BindBufferBase binds the entire buffer, even when the size of the
buffer is changed after the binding is established. It is
equivalent to calling BindBufferRange with offset zero, while size
is determined by the size of the bound buffer at the time the
binding is used." (GL 4.3 section 6.1.1 "Binding Buffer Objects to
Indexed Targets"). I interpret "at the time the binding is used"
to mean "at the time of the call to glBeginTransformFeedback".
3. "Regardless of the size specified with BindBufferRange, or
indirectly with BindBufferBase, the GL will never read or write
beyond the end of a bound buffer. In some cases this constraint may
result in visibly different behavior when a buffer overflow would
otherwise result, such as described for transform feedback
operations in section 13.2.2." (GL 4.3 section 6.1.1 "Binding
Buffer Objects to Indexed Targets").
Item 1 has been part of the spec all the way back to the inception of
the EXT_transform_feedback extension. Items 2 and 3 were added in GL
4.2 and GLES 3.
Prior to GL 4.2, in place of items 2 and 3, the spec simply said
"BindBufferBase is equivalent to calling BindBufferRange with offset
zero and size equal to the size of buffer." For transform feedback,
Mesa behaved as though this meant "...equal to the size of buffer at
the time of the call to BindBufferBase". However, this was
problematic because it left it ambiguous what to do if the buffer is
shrunk between the call to BindBuffer{Base,Range} and the call to
BeginTransformFeedback. Prior to this patch, Mesa's behaviour was to
try to write beyond the end of the buffer, likely resulting in memory
corruption. In light of this, I'm interpreting the spec change as a
clarification, not an intended behavioural change, so I'm making the
change apply regardless of API version.
Fixes GLES3 conformance test transform_feedback2_pause_resume.test.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In desktop GL, if a draw call would cause transform feedback buffers
to overflow, the draw call should succeed, and the extra primitives
should simply not be recorded in the transform feedback buffers.
In GLES3, however, if a draw call would cause transform feedback
buffers to overflow, the draw call is supposed to produce an
INVALID_OPERATION error and no drawing should occur.
This patch implements the GLES3-required behaviour.
Fixes GLES3 conformance test "transform_feedback_overflow.test".
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In GLES3, only glDrawArrays() and glDrawArraysInstanced() calls are
allowed when transform feedback is active.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Previously, the i965 driver contained code to compute the maximum
number of vertices that could be written without overflowing any
transform feedback buffers. This code wasn't driver-specific, and for
GLES3 support we're going to need to use it in core mesa. So this
patch moves the code into a core mesa function,
_mesa_compute_max_transform_feedback_vertices().
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
v2: Eliminate C++-style variable declarations, since these won't work
with MSVC.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
No functional change--this simply paves the way to allow futures
patches to call vbo_count_tessellated_primitives() during error
checking, before the _mesa_prim struct has been constructed.
This will be needed for GLES3, which requires draw calls to fail if
there is not enough space available in transform feedback buffers to
accommodate the primitives to be drawn.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Since the idea is to just expand or shrink the bit width but not otherwise do
conversion we also need to adjust the sign bit according to src, otherwise
the conversion code will incorrectly clamp the values. (Since this only works
for casting to ordinary floats the norm and fixed bits should always be fine.)
This fixes the remaining piglit attribs GL3 failures.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
a460aea3f1 wasn't entirely correct,
since all coords are already ints hence need to skip the iround.
Passes piglit texelFetch with sampler1DArray/sampler2DArray.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Make sure drivers initialize the version before:
* _mesa_initialize_exec_table is called
* _mesa_initialize_exec_table_vbo is called
* A context is made current
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The driver should call _mesa_initialize_vbo_vtxfmt after
computing the context version.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Drivers must compute the context version, and then call
_mesa_initialize_exec_table themselves.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
In a future patch the exec functions will no longer set up
by _mesa_initialize_context and _vbo_CreateContext.
Therefore we must call _mesa_initialize_exec_table and
_mesa_initialize_exec_table_vbo.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This change forces the context version to be computed before
initilizing the exec dispatch tables.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
In glapi/gl_genexec.py:
* Remove _mesa_alloc_dispatch_table call
In glapi/gl_genexec.py and api_exec.h:
* Rename _mesa_create_exec_table to _mesa_initialize_exec_table
In context.c:
* Call _mesa_alloc_dispatch_table instead of _mesa_create_exec_table
* Call _mesa_initialize_exec_table (this is temporary)
Once all drivers have been modified to call
_mesa_initialize_exec_table, then the call to
_mesa_initialize_context can be removed from context.c.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This is used by st_BlitFramebuffer() / r600_blit(), and ARB_fbo allows
overlapped blits, even though the result is undefined. No piglit regressions
on r600g / CYPRESS.
Signed-off-by: Henri Verbeet <hverbeet@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
struct brw_instruction and the related instruction emitting code won't
be useful on Gen8+, as the instruction encoding changed. However, the
struct brw_reg code is still extremely valuable.
While we're at it, fix up some style points:
- s/GLuint/unsigned/g
- s/GLint/int/g
- s/GLshort/int16_t/g
- s/GLushort/uint16_t/g
- s/INLINE/inline/g
- Replace tabs with spaces
- Put return types on a separate line from the function name/parameters
- Remove trailing whitespace
- Remove extraneous whitespace around function parameters
Reviewed-by: Eric Anholt <eric@anholt.net>
This adds the extensions + the tex buffer support for checking
the formats.
There is a piglit test enhancement sent to that list.
Reviewed-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Not sure what was going on here, but running piglit with debug builds
might be a good plan :-)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
No statistically significant performance difference on glbenchmark 2.7
(n=60). It reduces cycles spent in the vertex shader by 3.3% +/- 0.8%
(n=5), but that's only about .3% of all cycles spent according to the
fixed shader_time.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The way our visitor works, scalar expression/swizzle results that get
stored in channels other than .x will have an intermediate MOV from
their result in the .x channel to the real .y (or whatever) channel, and
similarly for vec2/vec3 results.
By knowing how to adjust DP4-type instructions for optimizing out a
swizzled MOV, we can reduce instructions in common matrix multiplication
cases.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The compute-to-mrf code is really twitchy, and it's hard to construct
GLSL testcases for it. This unit test is also really hard to work with
(for example, if your instruction is removed by dead code elimination,
you end up inspecting something irrelevant), but I did use it for
debugging some of the commits to follow.
I called it test_vec4_register_coalesce because the compute-to-mrf code
is about to morph into that.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The final halt of the fragment shader turns off the remaining channels,
then jumps such that everything is turned back on. So, we can have our
last ENDIF of the shader point at that directly.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
From the Ivybridge PRM, Volume 4, Part 3, section 6.24 (page 172):
"The endif instruction is also used to hop out of nested conditionals by
jumping to the end of the next outer conditional block when all
channels are disabled."
Also:
"Pseudocode:
Evaluate(WrEn);
if ( WrEn == 0 ) { // all channels false
Jump(IP + JIP);
}"
First, ENDIF re-enables any channels that were disabled because they
didn't match the conditional. If any channels are active, it proceeds
to the next instruction (IP + 16). However, if they're all disabled,
there's no point in walking through all of the instructions that have no
effect---it can jump to the next instruction that might re-enable some
channels (an ELSE, ENDIF, or WHILE).
Previously, we always set JIP on ENDIF instructions to 2 (which is
measured in 8-byte units). This made it do Jump(IP + 16), which just
meant it would go to the next instruction even if all channels were off.
It turns out that walking over instructions while all the channels are
disabled like this is worse than just instruction dispatch overhead: if
there are texturing messages, it still costs a couple hundred cycles to
not-actually-read from the texture results.
This patch finds the next instruction that could re-enable channels and
sets JIP accordingly.
Reviewed-by: Eric Anholt <eric@anholt.net>
V3: Put enable in an existing block rather than making a new
one for no good reason.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
V2: Moved up into emit(ir_texture *) to avoid duplication and fix
ordering for Gen7; Gen6 math quirks moved into previous patches.
Tested on Gen6 only; passes all the cube_map_array piglits.
V3: Fixed weird whitespace
V4: Use sampler->type; otherwise broken on arrays of samplers.
v5: Minor style fixes (by anholt)
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
V4: Fix various style nits as pointed out by Eric, and expand IMM
operands on both Gen6 and Gen7.
v5: minor style nits (by anholt)
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
V3: Fixed weird whitespace
V4: Use sampler's type rather than variable's type; otherwise broken
with arrays of samplers. (Thanks Eric)
v5: Fix a couple more style nits (by anholt)
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This causes immediate values to get moved to a temp on gen7, which is needed
for an upcoming change but hadn't happened in the visitor until then.
v2: Drop gen > 7 checks (doesn't exist), and style-fix comments (changes by
anholt).
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2: Actually switch on the other math instructions mentioned in the
comment.
v3: Add timing data for textureSize(), and clean up some long comment
lines.
Testing shader_time of fs16 shaders on a few frames of various apps:
nexuiz improved by 2.9% +/- 1.5% (n=10)
no difference on GLB2.5 (n=36, outliers removed)
no difference on GLB2.7 (n=25)
etqw improved by 2.6% +/- 2.2% (n=25)
no difference on lightsmark (n=25)
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
I've tested this to be true with various ALU ops on gen7 (with the
exception of MADs, which go at either 3 or 4 cycles per dispatch).
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
This gives the instruction scheduler a chance to schedule between the
loads, whereas before it was restricted due to the dependencies between
the MRFs for setting them up.
For one shader in gles3conform, it goes from getting stuck in register
allocation for as long as anybody's bothered to leave it running down
to 23 seconds, thanks to the LIFO scheduling.
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
This came from an idea by Ben Segovia. 16-wide pixel shaders are very
important for latency hiding on i965, so we want to try really hard to
get them. If scheduling an instruction makes some set of instructions
available, those are probably the ones that make the instruction's
result dead. By choosing those first, we'll have a tendency to reduce
the amount of live data as opposed to creating more.
Previously, we were sometimes getting this behavior out of the
scheduler, which was what produced the scheduler's original performance
wins on lightsmark. Unfortunately, that was mostly an accident of the
lame instruction latency information that I had, which made it
impossible to fix the actual scheduling for performance. Now that we've
fixed the scheduling for setup for register allocation, we can safely
update the latency parameters for the final schedule.
In shader-db, we lose 37 16-wide shaders, but gain 90 new ones. 4
shaders that were spilling change how many registers spill, for a
reduction of 70/3899 instructions.
v2: Simplify the new loop.
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Sometimes I've got a patch for a performance optimization that's not
showing a statistically significant performance difference on reported
FPS, but still seems like a good idea because it ought to reduce time
spent in the shader. If I can see the total number of cycles spent in
the shader stage being optimized, it may show that the patch is still
worthwhile (or point out that it's actually broken in some way).
Some shaders experience resets more than others, which skews the numbers
reported. Attempt to correct for this by linearly scaling according to
the number of resets that happen.
Note that will not be accurate if invocations of shaders have varying
times and longer invocations are more likely to reset. However, this
should at least be better than the previous situation.
I'm about to emit other kinds of writes besides time deltas, and it
turns out with the frequency of resets, we couldn't really use the old
time delta write() function more than once in a shader.
This patch implements varying packing between varyings.
Previously, each varying occupied components 0 through N-1 of its
assigned varying slot, so there was no way to pack two varyings into
the same slot. For example, if the varyings were a float, a vec2, a
vec3, and another vec2, they would be stored as follows:
<----slot1----> <----slot2----> <----slot3----> <----slot4----> slots
* * * * * * * * * * * * * * * *
flt x x x <vec2-> x x <--vec3---> x <vec2-> x x varyings
(Each * represents a varying component, and the "x"s represent wasted
space).
This change packs the varyings together to eliminate wasted space
between varyings, like so:
<----slot1----> <----slot2----> <----slot3----> <----slot4----> slots
* * * * * * * * * * * * * * * *
<vec2-> <vec2-> flt <--vec3---> x x x x x x x x varyings
Note that we take advantage of the sort order introduced in previous
patches (vec4's first, then vec2's, then scalars, then vec3's) to
minimize how often a varying is "double parked" (split across varying
slots).
Reviewed-by: Eric Anholt <eric@anholt.net>
v2: Skip varying packing if ctx->Const.DisableVaryingPacking is true.
This patch implements varying packing within varyings that are
composed of multiple vectors of size less than 4 (e.g. arrays of
vec2's, or matrices with height less than 4).
Previously, such varyings used up a full 4-wide varying slot for each
constituent vector, meaning that some of the components of each
varying slot went unused. For example, a mat4x3 would be stored as
follows:
<----slot1----> <----slot2----> <----slot3----> <----slot4----> slots
* * * * * * * * * * * * * * * *
<-column1-> x <-column2-> x <-column3-> x <-column4-> x matrix
(Each * represents a varying component, and the "x"s represent wasted
space). In addition to wasting precious varying components, this
layout complicated transform feedback, since the constituents of the
varying are expected to be output to the transform feedback buffer
contiguously (e.g. without gaps between the columns, in the case of a
matrix).
This change packs the constituents of each varying together so that
all wasted space is at the end. For the mat4x3 example, this looks
like so:
<----slot1----> <----slot2----> <----slot3----> <----slot4----> slots
* * * * * * * * * * * * * * * *
<-column1-> <-column2-> <-column3-> <-column4-> x x x x matrix
Note that matrix columns 2 and 3 now cross a boundary between varying
slots (a characteristic I call "double parking" of a varying).
We don't bother trying to eliminate the wasted space at the end of the
varying, since the patch that follows will take care of that.
Since compiler back-ends don't (yet) support this packed layout, the
lower_packed_varyings function is used to rewrite the shader into a
form where each varying occupies a full varying slot. Later, if we
add native back-end support for varying packing, we can make this
lowering pass optional.
Reviewed-by: Eric Anholt <eric@anholt.net>
v2: Skip varying packing if ctx->Const.DisableVaryingPacking is true.
On hardware that supports a limited number of texture indirections,
varying packing will comsume an extra texture indirection, since ALU
operations are needed in the fragment shader to unpack the varyings
before any texturing can be done.
This patch introduces a new driver option,
ctx->Const.DisableVaryingPacking, which can be used by a driver to opt
out of varying packing if the extra texture indirection is costly
enough to outweigh the advantages of packing varyings.
Reviewed-by: Marek Olšák <maraeo@gmail.com>
This lowering pass generates GLSL code that manually packs varyings
into vec4 slots, for the benefit of back-ends that don't support
packed varyings natively.
No functional change--the lowering pass is not yet used.
Reviewed-by: Eric Anholt <eric@anholt.net>
v2: Don't use ir_hierarchical_visitor--just loop over instructions
directly. Also, make the names of the packed varyings include the
names of the original varyings that were packed into them.
This patch paves the way for varying packing by adding a sorting step
before varying assignment, which sorts the varyings into an order that
increases the likelihood of being able to find an efficient packing.
First, varyings are sorted into "packing classes" by considering
attributes that can't be mixed during varying packing--at the moment
this includes base type (float/int/uint/bool) and interpolation mode
(smooth/noperspective/flat/centroid), though later we will hopefully
be able to relax some of these restrictions. The number of packing
classes places an upper limit on the amount of space that must be
wasted by varying packing, since in theory a shader might nave 4n+1
components worth of varyings in each of m packing classes, resulting
in 3m components worth of wasted space.
Then, within each packing class, varyings are sorted by vector size,
with vec4's coming first, then vec2's, then scalars, and then finally
vec3's. The motivation for this order is that it ensures that the
only vectors that might be "double parked" (with part of the vector in
one varying slot and the remainder in another) are vec3's.
Note that the varyings aren't actually packed yet, merely placed in an
order that will facilitate packing.
Reviewed-by: Eric Anholt <eric@anholt.net>
This patch further subdivides the loop that assigns varying locations
into two phases: one phase to match up the varyings between shader
stages, and one phase to assign them varying locations.
In between the two phases the matched varyings are stored in a new
data structure called varying_matches. This will free us to be able
to assign varying locations in any order, which will pave the way for
packing varyings.
Note that the new varying_matches::assign_locations() function returns
the number of varying slots that were used; this return value will be
used in a future patch.
Reviewed-by: Eric Anholt <eric@anholt.net>
This patch subdivides the loop that assigns varying locations into two
phases: one phase to match up varyings between shader stages (and
assign them varying locations), and a second phase to record the
varying assignments for use by transform feedback.
This paves the way for varying packing, which will require us to
further subdivide the first phase.
In addition, it lets us avoid a clumsy O(n^2) algorithm, since we can
now record the locations of all transform feedback varyings in a
single pass through the tfeedback_decls array, rather than have to
iterate through the array after assigning each varying.
Reviewed-by: Eric Anholt <eric@anholt.net>
Currently, the location of each varying is recorded in ir_variable as
a multiple of the size of a vec4. In order to pack varyings, we need
to be able to record, e.g. that a vec2 is stored in the second half of
a varying slot rather than the first half.
This patch introduces a field ir_variable::location_frac, which
represents the offset within a vec4 where a varying's value is stored.
Varyings that are not subject to packing will always have a
location_frac value of zero.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Previously, the linker used a value of -1 in ir_variable::location to
denote a generic input or output of the shader that had not yet been
matched up to a variable in another pipeline stage.
This patch introduces a new ir_variable field,
is_unmatched_generic_inout, for that purpose.
In future patches, this will allow us to separate the process of
matching varyings between shader stages from the processes of
assigning locations to those varying. That will in turn pave the way
for packing varyings.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Previously, link_invalidate_variable_locations() was only called
during assign_attribute_or_color_locations() and
assign_varying_locations(). This meant that in the corner case when
there was only a vertex shader, and varyings were being captured by
transform feedback, link_invalidate_variable_locations() wasn't being
called for the varyings.
This patch migrates the calls to link_invalidate_variable_locations()
to link_shaders(), so that they will be called in all circumstances.
In addition, it modifies the call semantics so that
link_invalidate_variable_locations() need only be called once per
shader stage (rather than once for inputs and once for outputs).
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This patch modifies the clip distance lowering pass so that the new
symbol it generates (glClipDistanceMESA) is added to the shader's
symbol table.
This will allow a later patch to modify the linker so that it finds
transform feedback varyings using the symbol table rather than having
to iterate through all the declarations in the shader.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This builds on the previous draw/softpipe patch.
So llvmpipe does streamout calls after clip/viewport stages,
but we have the pre-clip position stored for later use, so
when we are doing transform feedback, and its the position vertex
grab the vertex from the stored pre clip position.
The perfect fix is too probably add a codegen transform feedback
stage in between shader and clip stages, but this is good enough
for now.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds support to draw for the new features of transform feedback.
a) fix count_from_stream_output, using max_index+1 for now but it looks
like it should be valid as its derived from the vertex elements/vbo.
b) fix striding and dst offsets in output buffers - was just wrong before.
c) fix crash if tfb is suspended (so.num_targets == 0)
This also enables the new features on softpipe. It should be possible
to enable them on llvmpipe as well after this commit, but would need
to schedule piglit runs.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Every call to _cl_program::build() was erasing the binaries and logs for
every device associated with the program. This is incorrect because
it is possible to build a program for only a subset of devices and so
any device not being build should not have this information erased.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Override the cross_compiling and ac_tool_prefix variables by reassigning
to them instead of redefining the macros. Redefining them will actually
cause the variable names to be replaced instead of their content.
Furthermore push the definition of CPPFLAGS before running the checks
for the build tools to avoid the host CPPFLAGS from leaking into the
build CPPFLAGS.
While at it drop the redefinition of AC_TRY_COMPILER which hasn't been
used since autoconf 2.50 and make sure that all definitions are properly
popped when done (LDFLAGS, ac_cv_prog_CPP, ac_cv_prog_CXXCPP).
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Since we don't call lp_build_sample_common() in the texel fetch path we missed
the layer fixup code. If someone would have tried to do texelFetch with array
textures it would have crashed for sure.
Not really tested (can't run the piglit test being able to use texelFetch with
array samplers for now with llvmpipe).
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Previously, if the client program didn't specify a stride when setting
up a vertex attribute, we used _mesa_sizeof_type() to compute the size
of the type, and multiplied it by the number of components.
This didn't work for the 2_10_10_10 formats, since _mesa_sizeof_type()
returns -1 for those types, resulting in all kinds of havoc, since it
was causing the hardware to be programmed with a negative stride
value.
This patch adds a new function _mesa_bytes_per_vertex_attrib(), which
is similar to the existing function _mesa_bytes_per_pixel(), but which
computes the size of a vertex attribute based on the type and the
number of formats. For packed formats (currently only the 2_10_10_10
formats), it verifies that the number of components is correct and
returns the size of the packed format. For unpacked formats, it
returns the size of the type times the number of components.
In addition, this patch adds an assertion so that if we ever forget to
update _mesa_bytes_per_vertex_attrib() when adding a new vertex
format, we'll see the problem quickly rather than having to debug a
subtle conformance test failure.
Fixes GLES3 conformance tests
vertex_type_2_10_10_10_rev_{conversion,divisor,stride_pointer}.test.
Reviewed-by: Brian Paul <brianp@vmware.com>
The GL 3.1 and ES 3.0 specs say of glGetActiveUniformsiv:
"If an error occurs, nothing will be written to params."
So, make a pass through the indices and check that they're valid before
the pass that actually writes to params. Checking pname happens on the
first iteration of the second loop.
Fixes es3conform's getactiveuniformsiv_for_nonexistent_uniform_indices
test.
NOTE: This is a candidate for the 9.0 branch.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Otherwise messages say silly things like
glGetActiveUniformBlockiv(block index -1 >= 0)
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
try_rewrite_rhs_to_dst is a quick optimization to avoid generating new
temporaries (and MOVs from those temporaries to the dest) for every
expression tree we visit. By generating better code in simple cases, we
reduce the burden on later optimization passes like register coalescing.
Previously, we compared inst->regs_written() to lhs->vector_elements
to make sure the instruction generating our value wrote the same number
of components as our destination register.
However, this fails in some cases. One example is texturing (which
produces a vec4) into gl_FragData[i]. Technically, gl_FragData[i] is
also a vec4. However, the destination VGRF actually has size 4n (where
n is the size of the array).
split_virtual_grfs() can't split VGRFs that are used by SEND messages
which require contiguous destination registers (like texturing), and
register allocation needs all VGRFs to have sizes between 1 and 4.
Amnesia: The Dark Descent hits this case: a texturing instruction
(4 components) gets rewritten to the gl_FragData output register
(which was 4*3 = 12 components), causing the register allocator to
hit the "we rely on split_virtual_grfs" assertion.
This makes it possible to play Amnesia.
Reviewed-by: Eric Anholt <eric@anholt.net>
This is redundant since we're calling draw_bind_fragment_shader()
which already does a flush.
v2: the redundant flush in llvmpipe_set_constant_buffer() has
already been removed by commit 3427466e6d
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Fetch shaders are usually destroyed at the context destruction by the state
tracker, so we can put them all in a large buffer without wasting memory.
This reduces the number of relocations sent to the kernel a little bit.
Tested-by: Aaron Watry <awatry@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Instead of having a 4-byte buffer for each streamout target, we suballocate
each dword from a 4K buffer.
This further reduces the overall number of relocations.
Tested-by: Aaron Watry <awatry@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
u_upload_mgr suballocates memory from a large buffer and maps the allocated
range (unsychronized), which is perfect for short-lived staging buffers.
This reduces the number of relocations sent to the kernel.
Tested-by: Aaron Watry <awatry@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
There are 2 ways. I prefer the former:
GALLIUM_MSAA=n
__GL_FSAA_MODE=n
Tested with ETQW, which doesn't support MSAA on Linux. This is
the only way to get MSAA there.
Reviewed-by: Brian Paul <brianp@vmware.com>
There are only 2 possible usages: render target and depth stencil.
Both can be derived from the surface format, so the flag is redundant.
And it's going away...
Reviewed-by: Brian Paul <brianp@vmware.com>
This adds seamless sampling for cubemap boundaries if requested.
The corner case averaging is messy but seems like it should be spec
compliant.
The face direction stuff is also a bit messy, I've no idea if that could
or should be simpler, or even if all my directions are fully correct!
v1.1: update comments, drop unneeded seamless calls for nearest, fix
if statement layout.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This follow the code from the i965 driver, and emits the structs
and arrays recursively.
This fixes an assert in the two UBO tests
fs-struct-copy-complicated and
vs-struct-copy-complicated
These tests now pass on softpipe, with no regressions.
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes some use-after-free issues. I haven't measured any real
performance difference with a handful of Mesa demos.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Before this we only supported user-based constant buffers.
First, we basically plumb pipe_constant_buffer objects through llvmpipe
rather than pipe_resource objects.
Second, update llvmpipe_set_constant_buffer() and try_update_scene_state()
so they understand both resource- and user-based constant buffers.
The problem with user constant buffers is the potential for use-after-free,
as seen in some WebGL tests. The next patch will flip the switch for
resource-based const buffers.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
I had tried this in the past, but ran into trouble with applications
that sample from undiscarded pixels in the same subspan. To fix that
issue, only jump to the end for an entire subspan at a time.
Improves GLbenchmark 2.7 (1024x768) performance by 7.9 +/- 1.5% (n=8).
v2: Drop the br variable in the jump instruction -- if I ever do jumps
pre-gen6, it'll be a different code block anyway since we don't have
HALT until gen6.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This makes much more sense on gen6+, and will also prove useful for
early exit of shaders on discard.
v2: fix up a stale comment from before converting gen4-5.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We're going to redo discard handling to track discards in the other flag
subregister, saving instructions in the discard and allowing predicated
jumps out to the end of the shader.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This makes our output more consistent with other disasm tools, and
will be necessary when we start using f0.1.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We've been calling it a register number, it's actually the subregister,
and things will get confusing once we start using it if it isn't fixed.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
There's a flag subreg nr field in bits2 next to src0.vertstride, but
there shouldn't be anything in bits3 next to src1.vertstride.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Fixes compiler warning:
drm/native_drm.c: In function ‘native_create_display’:
drm/native_drm.c:180:21: warning: ‘device’ may be used uninitialized in this function [-Wmaybe-uninitialized]
drm/native_drm.c:157:24: note: ‘device’ was declared here
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This fixes a number of crashes on r600g due to the fact that
lp_build_mul assumes vector types when optimizing mul to bit shifts.
This bug was uncovered by 0ad1fefd69
Noticed would fail, we were doing two things wrong
a) 1d arrays require the layers in height
b) minifying the layers field.
v2: don't change height code, fixup completely inside txq
as suggested by Roland.
v3: just add minify before texture array size
v1: Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
command mistakenly used vector instead of scalar emit (the more or less
identical code in radeon is already correct).
Seems like it would be broken ever since kms probably.
Should fix bugs 22576, 26809.
I noticed the texelFetch offset test failed on 2D rect samplers
with GLSL 1.40. This is because I wrote the immediate->offset
translation wrong.
Fixed the translation to actually use the ureg info to set the
offsets up.
Signed-off-by: Dave Airlie <airlied@redhat.com>
This ports over from the dri2 code to the drisw bits. It means 3.1
core contexts now work for softpipe.
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is needed to compute render_to_fbo. It even has the comment.
NOTE: This is a candidate for stable branches.
Reviewed-by: Eric Anholt <eric@anholt.net>
This patch does two things:
1. Constant buffer state changes were broken (but happened to work by
dumb luck). The problem is we weren't calling draw_do_flush() in
draw_set_mapped_constant_buffer() when we changed that state. All the
other draw_set_foo() functions were calling draw_do_flush() already.
2. Use a simpler state validation step when we're changing light-weight
parameter state such as constant buffers, viewport dims or clip planes.
There's no need to revalidate the whole pipeline when changing state
like that. The new validation method is called bind_parameters()
and is called instead of the prepare() method. A new
DRAW_FLUSH_PARAMETER_CHANGE flag is used to signal these light-weight
state changes. This results in a modest but measurable increase in
FPS for many Mesa demos.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
When one function is changed, also look at the other.
Presently, there are some differences with respect to geometry
shaders and instanced drawing...
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
this adds UBO support to the state tracker, it works with softpipe
as-is.
It uses UARL + CONST[x][ADDR[0].x] type constructs.
v2: don't disable UBOs if geom shaders don't exist (me)
rename upload to bind (calim)
fix 12 -> 13 comparison as comment (calim + brianp)
fix signed->unsigned (Brian)
remove assert (Brian)
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds the necessary changes to the st to allow texture buffer object
support if the driver advertises it.
v1.1: remove extra blank line and whitespace
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This patch enables support for ETC2 compressed textures on
all intel hardware. At present, ETC2 texture decoding is not
available on intel hardware. So, compressed ETC2 texture data
is decoded in software and stored in a suitable uncompressed
MESA_FORMAT at the time of glCompressedTexImage2D. Currently,
ETC2 formats are only exposed in OpenGL ES 3.0.
V2: Use single etc_wraps variable for both etc1 and etc2.
V3: Remove redundant code and use just one intel_miptree_map_etc()
and intel_miptree_unmap_etc() function.
Choose MESA_FORMAT_SIGNED_{R16, GR1616} for ETC2 signed-{r11, rg11}
formats
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Tested-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Data in GL_COMPRESSED_SRGB8_PUNCHTHROUGH_ALPHA1_ETC2 format is decoded and stored
in MESA_FORMAT_SARGB.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Data in GL_COMPRESSED_RGB8_PUNCHTHROUGH_ALPHA1_ETC2 format is decoded and stored
in MESA_FORMAT_RGBA8888_REV.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Data in GL_COMPRESSED_SIGNED_RG11_EAC format is decoded and stored in
MESA_FORMAT_SIGNED_GR1616.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Data in GL_COMPRESSED_SIGNED_R11_EAC format is decoded and stored in
MESA_FORMAT_SIGNED_R16.
v2:
16 bit signed data is converted to 16 bit unsigned data by
adding 2 ^ 15 and stored in an unsigned texture format.
v3:
1. Handle a corner case when base code word value is -128. As per
OpenGL ES 3.0 specification -128 is not an allowed value and should
be truncated to -127.
2. Converting a decoded 16 bit signed data to 16 bit unsigned data by
adding 2 ^ 15 gives us an output which matches the decompressed image
(.ppm) generated by ericsson's etcpack tool. ericsson is also doing this
conversion in their tool because .ppm image files don't support signed
data. But gles 3.0 specification doesn't suggest this conversion. We
need to keep the decoded data in signed format. Both signed format
tests in gles3 conformance pass with these changes.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Tested-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Data in GL_COMPRESSED_RG11_EAC format is decoded and stored in
MESA_FORMAT_RG1616.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Data in GL_COMPRESSED_R11_EAC format is decoded and stored in
MESA_FORMAT_R16.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Data in GL_COMPRESSED_SRGB8_ALPHA8_ETC2_EAC format is decoded and stored
in MESA_FORMAT_SARGB8.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Data in GL_COMPRESSED_RGBA8_ETC2_EAC format is decoded and stored
in MESA_FORMAT_RGBA8888_REV.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Data in GL_COMPRESSED_SRGB8_ETC2 format is decoded and stored
in MESA_FORMAT_SARGB8.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Data in GL_COMPRESSED_RGB8_ETC2 format is decoded and stored in
MESA_FORMAT_RGBX8888_REV.
v2: Use CLAMP macro and stdbool.h
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
This patch changes nonlinear_to_linear() function to non static inline
and makes it available outside format_unpack.c. Also, removes the
duplicate copies in other files.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
It is required by OpenGL ES 3.0 to support ETC2 textures.
This patch adds new MESA_FORMATs for following etc2 texture
formats:
GL_COMPRESSED_RGB8_ETC2
GL_COMPRESSED_SRGB8_ETC2
GL_COMPRESSED_RGBA8_ETC2_EAC
GL_COMPRESSED_SRGB8_ALPHA8_ETC2_EAC
GL_COMPRESSED_R11_EAC
GL_COMPRESSED_RG11_EAC
GL_COMPRESSED_SIGNED_R11_EAC
GL_COMPRESSED_SIGNED_RG11_EAC
MESA_FORMAT_ETC2_RGB8_PUNCHTHROUGH_ALPHA1
MESA_FORMAT_ETC2_SRGB8_PUNCHTHROUGH_ALPHA1
Above formats are currently available in only gles 3.0.
v2: Add entries in texfetch_funcs[] array.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
v3 (Paul Berry <stereotype441@gmail.com>): comment out symbols that
are not implemented yet, so that this commit compiles on its own;
future commits will uncomment the symbols as they become available.
Removes a collision of the object file name for main/hash_table
and program/hash_table.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The ES 3 conformance suite unbinds buffers (by binding buffer 0) and
passes zero for the size and offset, which the spec explicitly
disallows. Otherwise, this seems like a reasonable thing to do.
Khronos will be changing the spec to allow this (bug 9765). Fixes
es3conform's transform_feedback_init_defaults test.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Just enough for draw module to work ok.
This improves "piglit attribs GL3", though something fishy is still
happening with certain unsigned integer values.
Reviewed-by: Brian Paul <brianp@vmware.com>
The ADDR file is cumbersome for native integer capable drivers. We
should consider deprecating it eventually, but this just adds support
for indirection from TEMP registers.
Reviewed-by: Brian Paul <brianp@vmware.com>
Support 16 (defined in LP_MAX_TGSI_CONST_BUFFERS) as opposed to 32 (as
defined by PIPE_MAX_CONSTANT_BUFFERS) because that would make the jit
context become unnecessarily large.
v2: Bump limit from 4 to 16 to cover ARB_uniform_buffer_object needs,
per Dave Airlie.
Reviewed-by: Brian Paul <brianp@vmware.com>
All MSAA buffers are allocated privately and resolved into the DRI-provided
back and front buffers.
If an MSAA visual is chosen, the buffers st/mesa receives are all
multi-sample. st/mesa doesn't have access to the single-sample buffers
in that case.
This makes MSAA work in games like Nexuiz.
Reviewed-by: Brian Paul <brianp@vmware.com>
- We can use a single loop for adding new configs.
- The useless parameter depth_bits is removed.
- The maximum number of samples is bumped to 32.
- We can support Z16_UNORM and Z32_UNORM unconditionally since the zbuffers
are private.
Reviewed-by: Brian Paul <brianp@vmware.com>
This disables DRI2 sharing of zbuffers. The window zbuffer is allocated just
like any other texture - through resource_create.
The idea of allocating a zbuffer through DRI2 isn't very useful with MSAA,
where a single-sample zbuffer is useless.
IIRC, the Intel driver does the same thing.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Just use pipe->blit, which can do resolve, flipping, and format conversions.
The util_blit_pixels codepath is still there for the cases where we have to
force alpha to 1.
This also turns on acceleration for copying GL_DEPTH_STENCIL.
This may not be strictly necessary, but every other rule in the grammar ends
with a semicolon. It also appears that this was supposed to be commited with
the original patch that changed this rule, but the wrong version of the patch
was accidentally pushed.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Note that while 'packed' is a reserved word in GLSL ES, row_major is not.
This means that we have to use the string-based matching for that.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Carl Worth <cworth@cworth.org>
Nearly all of the builtin functions in GLSL 3.00 ES are already
implemented in Mesa; this patch enables them.
A few functions are not implemented yet; those have been commented
out, with a FIXME comment to act as a reminder of what still needs to
be implemented. Here is the complete list: packSnorm2x16,
unpackSnorm2x16, packUnorm2x16, unpackUnorm2x16, packHalf2x16,
unpackHalf2x16.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Carl Worth <cworth@cworth.org>
These functions are defined in GLSL 1.50 and GLES 3.00 ES.
The formulas have been extracted from the existing implementation of
inverse().
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Carl Worth <cworth@cworth.org>
This patch also adds assertions so that when we add new GLSL versions,
we'll notice that we need to update the builtin variables.
[v2, idr]: s/Frab/Frag/ Noticed by Eric.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> [v1]
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Carl Worth <cworth@cworth.org>
This patch implements all of the built-in types for GLSL 3.00 ES.
This is almost exactly the same as the set of built-in types for GLSL
1.30, except ate 1D samplers are skipped, and samplerCubeShadow is
added.
This patch also addes an assertion so that when we add new GLSL
versions, we'll notice that we need to update the types.
In review, Eric noted:
"This change looks correct. The overall interaction of profiles is
getting ugly, though. I'm imagining a restructure of the symbol
table population so that there's a big list of types, and each
#version has a nice list of strings of type names copy and pasted
out of its spec."
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Carl Worth <cworth@cworth.org>
This patch updates the following linker checks to do the right thing
in GLSL 3.00 ES:
- Failing to write to gl_Position is allowed in GLSL 1.40+ as well as
GLSL 3.00 ES.
- It is an error to write to both gl_ClipVertex and gl_ClipDistance in
GLSL 1.30+. This does not apply to GLSL 3.00 ES.
- GLSL 3.00 ES uses the same varying counting rules as GLSL 1.00 ES.
- In GLSL 1.30 and GLSL 3.00 ES, "discard" terminates the shader.
- In GLSL 1.00 ES and GLSL 3.00 ES, both a fragment and a vertex
shader must be present.
[v2, idr]: Fix minro typo in a comment. Noticed by Ken.
[v3, idr]: s/IsEs(Shader|Prog)/IsES/ Suggested by Ken and Eric.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Carl Worth <cworth@cworth.org>
Previously we recorded just the GLSL version (or the max version, if
GLSL 1.10 and GLSL 1.20 programs were linked together).
[v2, idr]: s/IsEs(Shader|Prog)/IsES/ Suggested by Ken and Eric.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Carl Worth <cworth@cworth.org>
Previously, we prohibited mixing of shading language versions if
min_version == 100 or max_version >= 130. This was technically
correct (since desktop GLSL 1.30 and beyond prohibit mixing of shading
language versions, as does GLSL 1.00 ES), but it was confusing. Also,
we asserted that all shading language versions were between 1.00 and
1.40, which was unnecessary (since the parser already checks shading
language versions) and doesn't work for GLSL 3.00 ES.
This patch changes the code to explicitly check that (a) ES shaders
aren't mixed with desktop shaders, (b) shaders aren't mixed between ES
versions, and (c) shaders aren't mixed between desktop GLSL versions
when at least one shader is GLSL 1.30 or greater. Also, it removes
the unnecessary assertion.
[v2, idr]: Slightly tweak the is_es_prog detection to occur outside the loop
instead of doing something special on the first loop iteration. Suggested by
Ken.
[v3, idr]: s/IsEs(Shader|Prog)/IsES/ Suggested by Ken and Eric.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> [v1]
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Carl Worth <cworth@cworth.org>
Previously we recorded just the GLSL version, with the knowledge that
100 means GLSL 1.00 ES. With the advent of GLSL 3.00 ES, this is
going to get more complex, and eventually will probably become
ambiguous (GLSL 4.00 already exists, and GLSL 4.00 ES is likely to be
created some day).
To reduce confusion, this patch simply records whether the shader is
GLSL ES as an explicit boolean.
[v2, idr]: s/IsEs(Shader|Prog)/IsES/ Suggested by Ken and Eric.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> [v1]
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Carl Worth <cworth@cworth.org>
Note that GLSL 1.00 is selected using "#version 100", so "#version 100
es" is prohibited.
v2: Check for GLES3 before allowing '#version 300 es'
v3: Make sure a correct language_version is set in
_mesa_glsl_parse_state::process_version_directive.
Signed-off-by: Paul Berry <stereotype441@gmail.com>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Carl Worth <cworth@cworth.org>
Version directive handling is going to have to be used within two
parser rules, one for desktop-style version directives (e.g. "#version
130") and one for the new ES-style version directive (e.g. "#version
300 es"), so this patch moves it to a function that can be called from
both rules.
No functional change.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Carl Worth <cworth@cworth.org>
Version directive handling is going to have to be used within two
parser rules, one for desktop-style version directives (e.g. "#version
130") and one for the new ES-style version directive (e.g. "#version
300 es"), so this patch moves it to a function that can be called from
both rules.
No functional change.
[mattst88] v2: Use intmax_t instead of int for version argument. Would
otherwise write garbage after #version since PRIiMAX was reading 64-bits
instead of 32.
[idr] v3: A later commit fixes the caller of
_glcpp_parser_handle_version_declaration to pass the correct number of
parameters. Fix it in the patch that changes the interface instead.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Carl Worth <cworth@cworth.org>
This patch turns on the following features for GLSL ES 3.00:
- Array constructors, whole array assignment, and array comparisons.
- Second and third operands of ?: may be arrays.
- Use of "in" and "out" qualifiers on globals.
- Bitwise and modulus operators.
- Integral vertex shader inputs.
- Range-checking of literal integers.
- array.length method.
- Function calls may be constant expressions.
- Integral varyings must be qualified with "flat".
- Interpolation and centroid qualifiers may not be applied to vertex
shader inputs.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Carl Worth <cworth@cworth.org>
GLSL ES 3.00 adds the following keywords over GLSL 1.00: uint,
uvec[2-4], matNxM, centroid, flat, smooth, various samplers, layout,
switch, default, and case.
Additionally, it reserves a large number of keywords, some of which
were already reserved in versions of desktop GL that Mesa supports,
some of which are new to Mesa.
A few of the reserved keywords in GLSL ES 3.00 are keywords that are
supported in all other versions of GLSL: attribute, varying,
sampler1D, sampler1DShador, sampler2DRect, and sampler2DRectShadow.
This patch updates the lexer to handle all of the new keywords
correctly when the language being parsed is GLSL 3.00 ES.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Carl Worth <cworth@cworth.org>
This patch expands the lexer KEYWORD macro to take two additional
arguments: the GLSL ES versions in which the given keyword was first
reserved, and supported, respectively. This will allow us to
trivially add support for GLSL 3.00 ES keywords, even though the set
of GLSL 3.00 ES keywords is neither a subset or a superset of the
keywords corresponding to any desktop GLSL version.
The new KEYWORD macro makes use of the
_mesa_glsl_parse_state::is_version() function, so it accepts 0 as
meaning "unsupported" (rather than 999, which we used previously).
Note that a few keywords ("packed" and "row_major") are supported
*either* when GLSL 1.40 is in use or when ARB_uniform_buffer_obj
support is enabled. Previously, we handled these by cleverly taking
advantage of the fact that the KEYWORD macro didn't parenthesize its
arguments in the usual way. Now they are handled more
straightforwardly, with a new macro, KEYWORD_WITH_ALT.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Carl Worth <cworth@cworth.org>
Previous to this patch, we were not very consistent about the errors
we generate when a shader tried to use a feature that is prohibited in
the current GLSL version. Some error messages failed to mention the
GLSL version currently in use (or did so inaccurately), and some error
messages failed to mention the first GLSL version in which the given
feature is allowed.
This patch reworks all of the error checks to use the check_version()
function, which produces error messages in a standard form
(approximately "$FEATURE forbidden in $CURRENT_GLSL_VERSION
($REQUIRED_GLSL_VERSION required).").
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Carl Worth <cworth@cworth.org>
With the advent of GLSL 3.00 ES, the version checks we perform in the
GLSL compiler (to determine which language features are present) will
become more complicated. To reduce the complexity, this patch adds
functions check_version() and is_version() to _mesa_glsl_parse_state.
These functions take two version numbers: a desktop GLSL version and a
GLSL ES version, and return a boolean indicating whether the GLSL
version being compiled is at least the required version. So, for
example, is_version(130, 300) returns true if the GLSL version being
compiled is at least desktop GLSL 1.30 or GLSL 3.00.
The check_version() function additionally produces an error message if
the version check fails, informing the user of which GLSL version(s)
support the given feature.
[v2, idr]: Add PRINTFLIKE annotation to the new method. The numbering of th
parameters is correct because GCC is silly.
[v3, idr]: Fix copy-and-paste error in the comment before
_mesa_glsl_parse_state::is_version. Noticed by Ken.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Carl Worth <cworth@cworth.org>
Fixes a bug where version_string would be left uninitialized if no
GLSL "#version" directive was used.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Carl Worth <cworth@cworth.org>
This will be useful in generating more helpful error messages,
especially with the addition of GLSL 3.00 ES support.
[v2, idr]: Rename ctx parameter to mem_ctx
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Carl Worth <cworth@cworth.org>
Previously, we stored the GLSL language version in the
glsl_symbol_table struct. But this was unnecessary--all
glsl_symbol_table needs to know is whether functions and variables
have separate namespaces (they do in GLSL 1.10 only).
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Carl Worth <cworth@cworth.org>
Adding this now makes it easier to develop and test GLES3 features, since we
can do initial development and testing using desktop GL. Later GLSL compiler
patches check for either ctx->Extensions.ARB_ES3_compatibility or
_mesa_is_gles3 to allow certain features (i.e., "#version 300 es").
[v2, idr]: Just edits to the commit message.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Carl Worth <cworth@cworth.org>
Previously, the user could send in a pointer that was not created
by mesa. When we dereferenced that pointer, there would be an
exception.
Now we keep a set of pointers and verify that the pointer
exists in that set before dereferencing it.
Note: This fixes several crashing gles3conform tests.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Note: The GL/GLES3 web man pages don't seem to properly
document glWaitSync's error when the sync object is invalid.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
From: git://people.freedesktop.org/~anholt/hash_table
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
[jordan.l.justen@intel.com: minor rework for mesa]
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
u_rect.h said these should move to a different file, and u_surface seems
a better home.
Leave #include "util/u_surface.h" to avoid having to touch thousand of
files.
Reviewed-by: Brian Paul <brianp@vmware.com>
- Re-implement os_time_get in terms of os_time_get_nano() for consistency
- Use CLOCK_MONOTONIC as recommended
- Only use clock_gettime on Linux for now.
Reviewed-by: Brian Paul <brianp@vmware.com>
Otherwise the driver announces 4096 vertex shader constants and other
way too high limits.
NOTE: This is a candidate for stable release branches.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GL/gl.h provides some definitions (GL_FALSE, GL_ONE, etc) that have
the same value as other gl headers but are represented differently
(0 vs 0x0 and 1 vs 0x1).
This causes compiler warnings about redefining such definitions when
including GL/gl.h with other gl headers.
Fixes http://bugs.freedesktop.org/show_bug.cgi?id=57802
Signed-off-by: Brian Paul <brianp@vmware.com>
Several issues actually:
- Fix a regression in unsigned normalized in the rescaling
[0, 255] to [0, 256]
- Ensure we use signed shifts where appropriate (instead of
unsigned shifts)
- Refactor the code slightly -- move all the logic inside
lp_build_lerp_simple().
This change, plus an adjustment in the tolerance of signed normalized
results in piglit fbo-blending-formats fixes bug 57903
Reviewed-by: Brian Paul <brianp@vmware.com>
They need to be converted to the native integer type to prevent garbage
in higher order bits from being printed.
Reviewed-by: Brian Paul <brianp@vmware.com>
Remove the draw_vs_set_constants() and draw_gs_set_constants()
functions and the draw->vs.aligned_constants,
draw->vs.aligned_constant_storage and draw->vs.const_storage_size
fields. None of it was used.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Commit 4097308 fixed the build in a questionable way. It worked at the
time, but, as Ian pointed out, the fix would likely fail at a future
commit due to the indeterminism of parallel builds. And that's exactly
what happened; the fix no longer works. `mm -j4` on Fedora 17 fails for
me.
The problem is that there is no rule for program_parse.tab.h. To fix that,
this patch adds a rule that makes program_parse.tab.c depend on
program_parse.tab.h. Technically, the c file does not depend on the
h file. However, because the two files are generated together by a single
invocation of Bison, any rule that forces execution of Bison is
sufficient.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
I'd written most of this ages ago, but never finished it off.
This passes 115/130 piglit tests so far. I'll look into the
others as time permits.
v1.1: fix calloc return check as suggested by Jose.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This can be used for two purposes: Using hand-coded shaders to determine
per-instruction timings, or figuring out which shader to optimize in a
whole application.
Note that this doesn't cover the instructions that set up the message to
the URB/FB write -- we'd need to convert the MRF usage in these
instructions to GRFs so that our offsets/times don't overwrite our
shader outputs.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v1)
v2: Check the timestamp reset flag in the VS, which is apparently
getting set fairly regularly in the range we watch, resulting in
negative numbers getting added to our 32-bit counter, and thus large
values added to our uint64_t.
v3: Rebase on reladdr changes, removing a new safety check that proved
impossible to satisfy. Add a comment to the AOP defs from Ken's
review, and put them in a slightly more sensible spot.
v4: Check timestamp reset in the FS as well.
Fixes flat shading for AA lines. demos/src/trivial/line-smooth is a
test case which hits this.
Note: This is a candidate for the stable branches.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
x11_screen.c includes xf86drm.h, which comes from libdrm-dev.
This patch fixes this build error.
Compiling src/gallium/state_trackers/egl/x11/x11_screen.c ...
src/gallium/state_trackers/egl/x11/x11_screen.c:30:21: fatal error: xf86drm.h: No such file or directory
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Serious Sam 3 had a shader hitting this path, but it's used rarely so it
didn't show a significant performance difference (n=7). It does reduce
compile time massively, though -- one shader goes from 14s compile time
and 11723 instructions generated to .44s and 499 instructions.
Note that some shaders lose 16-wide mode because we don't support
16-wide and pull constants at the moment (generally, things looping over
a few-element array where the loop isn't getting unrolled). Given that
those shaders are being generated with 15-20% fewer instructions, it
probably outweighs the loss of 16-wide.
The gen7 send-from-GRF path is sufficiently different from the perspective of
IR generation and optimization that I just made it a separate opcode.
v2: fix whitespace, rebase on Ken's recent refactor.
As of gen7, we can skip the header on some messages, and this can make
optimization on those messages much nicer when you've got GRFs instead of MRFs
as the source.
This is a temporary hack. I believe the only way of properly fixing this
is to check buffer overflow just before fetching based on addresses,
instead of number of vertices/instances. This change simply allows tests
that stress buffer overflows to complete without asserting, and should
not affect valid rendering.
Reviewed-by: Brian Paul <brianp@vmware.com>
We need to clamp vertex buffer fetch based on its size, not based on the
user specified max index hint.
This matches draw_pt_fetch_run() above.
NOTE: This is a candidate for the stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
A single vertex size is chosen for the whole pipeline. So the number of
geometry shader outputs must also be taken in consideration.
Reviewed-by: Brian Paul <brianp@vmware.com>
There is more work necessary to properly support buffers in shaders, but
this gets things a bit further along.
Reviewed-by: Brian Paul <brianp@vmware.com>
This fixes fdo bug 57755 and most of the failures of piglit fbo-blending-formats
GL_EXT_texture_snorm.
GL_INTENSITY_SNORM is still failing, but problem is probably elsewhere,
as GL_R8_SNORM works fine.
Now that _mesa_BindFramebuffer does the right thing in ES contexts when the
gl_extensions::ARB_framebuffer_object bit is set, the Intel driver doesn't
need this hack.
No piglit or GLES2 conformance regressions observed on IVB, and this
patch (and the previous) fix es3conform's framebuffer_srgb_draw and
transform_feedback_misc tests.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Desktop OpenGL implementations that support either
GL_ARB_framebuffer_object or OpenGL 3.0 must require names from
glGenFramebuffers for glBindFramebuffer. We have enforced this rule for
quite some time. However, OpenGL ES 1.0, 2.0, and 3.0 implementations
are required to allow user-defined names (e.g., not from
glGenFramebuffers{OES,}).
The Intel drivers have hacked around this by not enabling
GL_ARB_framebuffer_object in an ES context. Instead, just pick the
correct behavior in _mesa_BindFramebuffer based on the context API.
Chad pointed out in a review e-mail:
"I'd like to point out, though, that glBindFramebufferEXT and
glBindRenderbufferEXT are still broken on desktop GL because they
don't accept user-genned names. But that fix belongs to a different
series."
Currently glBindFramebufferEXT is an alias for glBindFramebuffer.
Unalising two functions presents some difficulty, so we'll have to
revisit this eventually.
v2: Perform same check in _mesa_BindRenderbuffer too.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> [v1]
The NV formulation of primitive restart is turned on/off with
glEnableClientState/glDisableClientState. These two functions don't
exist in core contexts, which mean that GL_NV_primitive_restart is
essentially useless...even broken.
However, leaving it on causes oglconform's primitive-restart-nv tests to
run in OpenGL 3.1 contexts, which results in them all failing. This
patch causes 29 subtests to go from "fail" to "not run".
NOTE: This is a candidate for stable branches.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
I keep accidentally trying to use it. "fs" is a sensible name for
fragment shader debugging, and "wm" is...not. It's also more symmetric
with "vs".
Leave INTEL_DEBUG=wm because old habits die hard.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Also remove the recently added and overloaded LLVM_CXXFLAGS from CXXFLAGS.
Note: This is a candidate for the stable branches.
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
After walking our IR instructions (Mesa or GLSL), we don't want to also
mark the start of the FB/URB writes or whatever as being that IR. This
can end up being misleading when the end of the IR visit got copy
propagated out to a later instruction in the URB writes.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The VP generation doesn't set up the output reg strings, so if you
didn't happen to get these values as 0 on the stack, you'd lose.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Bison -o parameter expects a .c file.
The corresponding .h filename is obtained
by removing the extension of the initial .c.
This was breaking compilation on Ubuntu 12.04
libmesa_dricore_intermediates/libmesa_dricore.a(program_parse.tab.o): In
function `_mesa_parse_arb_program':
external/mesa/src/mesa/program/program_parse.y:2682: multiple definition
of `_mesa_parse_arb_program'
libmesa_dricore_intermediates/libmesa_dricore.a(lex.yy.o):external/mesa/src/mesa/program/program_parse.y:2682:
first defined here
Signed-off-by: Adrian Marius Negreanu <adrian.m.negreanu@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-and-tested-by: Chad Versace <chad.versace@linux.intel.com>
In my testing I haven't found any cases where we get a null context
pointer, but it might still be possible. Check for null just to be safe.
Note: This is a candidate for the stable branches.
Only fail if GLX_SAMPLE_BUFFERS_ARB or GLX_SAMPLES_ARB are non-zero.
We were already doing this in the older swrast/glx code.
This fixes a piglit/waffle problem where we'd always fail to get a
visual/config and report the test as "skip".
Note: This is a candidate for the stable branches.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We were warning when there was no current context and we're about
to delete a renderbuffer, but that happens fairly often and isn't
really a problem.
Fixes http://bugs.freedesktop.org/show_bug.cgi?id=57754
Note: This is a candidate for the stable branches.
Tested-by: Ian Romanick <ian.d.romanick@intel.com>
This required an update for the query storage in llvmpipe, there
can now be an active query per query type, so an occlusion query
can run at the same time as a time elapsed query.
Based on PIPE_QUERY_TIME_ELAPSED patch from Dave Airlie.
v2: fix up piglits for timers (also from Dave Airlie)
a) if we don't render anything the result is 0, so just
return the current time
b) add missing screen get_timestamp callback.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: José Fonseca <jfonseca@vmware.com>
we need to rely on util code for fetching those, just like before
9f06061d50.
Fixes bugs 57699 and 57756.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Tell LLVM the exact alignment we can guarantee, based on the fs block
dimensions, pixel format, and the alignment of the resource base pointer
and stride.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
The fs shader now depends on the color buffer formats. The shader key was
extended to accommodate this, but llvmpipe_update_derived needs to be
updated to check the framebuffer dirty flag.
This fixes bug 57674.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
I fixed the only known bugs on r500 with 0222b2bd41.
Now there are no piglit regressions with Hyper-Z and all apps I tested seem
to work.
To summarize how it works:
- Only one process can use it at a time. This is a hardware limitation.
- The first process to clear a zbuffer gets the exclusive access to use
Hyper-Z.
- Compositors don't use any zbuffer, so they won't steal it, but some web
browsers do, so make sure there's no web browser running if you want your
game to use Hyper-Z.
- There's no need to restart an app which couldn't get the access to Hyper-Z.
Just quit the app which took it, the driver can turn it on for the other app
in the middle of rendering.
- If an app gets the access to Hyper-Z, it prints "radeon: Acquired Hyper-Z"
to stdout.
r300-r400:
Hyper-Z will be enabled by default on r300-r400 once sufficient testing is
done with piglit and Lightsmark at least.
Be sure to set the env var RADEON_HYPERZ and run piglit with parameters: -c 0
This fixes wrong rendering in Lightsmark and
the piglit/depthstencil-render-miplevels.
I think I fixed Hyper-Z. So far every app seems to work like a charm.
The following commit broke the i965 build:
commit 4a486f8bf2
Author: Marek Olšák <maraeo@gmail.com>
Date: Fri Nov 23 18:31:42 2012 +0100
glx/dri2: add and use new driver hook flush_with_flags
That commit added a forward declaration of enum __DRI2throttleReason to
dri_interface.h. C++ 98 does not allow forward declarations of enums.
The fix: Move the enum's definition to earlier in the file.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
The border clamping code is unnecessary, since we don't care if a wrapped
coord value is -1 or <-1 (same for length vs. >length), in either case the
border handling code will mask out the offset and replace the texel value with
the border color.
Note that technically this is not entirely correct. Omitting clamping on the
float coords means that flt->int conversion may result in undefined values for
values of very large magnitude.
However there's no reason we should honor this here since:
a) we don't care for that for ordinary wrap modes in the aos code when
converting coords and the problem is worse there (as we've got only
effectively 24 instead of 32bits)
b) at least in some cases the clamping was done already in int space hence
doing nothing to fix that problem.
c) with sse2 flt->int conversion with such values results in 0x80000000 which
is just perfect (for clamp to border - not so much for the ordinary clamp to
edge).
Reviewed-by: Brian Paul <brianp@vmware.com>
Coverity pointed out this uninitialised class member.
Note: This is a candidate for stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
coverity pointed out this field was being used uninitialised.
Note: This is a candidate for stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
all unsigneds are >= 0 :-)
There may be an argument for leaving this in, in case someone
changes min_lod to an integer, so feel free to apply or drop.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reported by coverity scan.
v2: fix second case
Note: This is a candidate for stable branches.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
I haven't confirmed this is doing the correct thing, but at
least this might make someone review it!
Reported by internal RH coverity scan.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
the critical error would use driverName.
Found by internal RH coverity scan.
Note: This is a candidate for stable branches.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This reverts commit 962a1c07b4.
Further testing revealed that this commit can cause the pre-processor to enter
infinite loops. For now, simply revert this code until a cleaner,
better-tested version is available.
Previously, we were only supporting line-continuation backslash characters
within lines of pre-processor directives, (as per the specification). With
OpenGL 4.2 and GLES3, line continuations are now supported anywhere within a
shader.
While changing this, also fix a bug where the preprocessor was ignoring
line continuation characters when a line ended in multiple backslash
characters.
The new code is also more efficient than the old. Previously, we would
perform a ralloc copy at each newline. We now perform copies only at each
occurrence of a line-continuation.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
When a client frame callback is executed and the client starts rendering
again, the egl event queue might not have been dispatched so that the
buffer release event for the previous frame hasn't been processed. In
that case a third buffer is allocated, even though it would be possible
to reuse the buffer that was just released.
The wl_display_dispatch_queue_pending() entry point is available from
wayland-client 1.0.2, so require that in configure.ac. Also, just
let the pkg-config macro throw its own error, which will show what version
we were looking for and failed to find.
Note: This is a candidate for stable branches.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Commit ca3ed3e024 fixed the problem where
eglMakeCurrent would trigger a getbuffer callback that then breaks the
following wl_egl_window_resize() call. However, we still need to
invalidate buffers in eglSwapBuffers, since in wayland we always swap
buffers, so the dri driver needs to come out and ask us for the next buffer
after each swapbuffer.
Note: this is a candidate for stable branches.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
These helper macros save you from writing nasty expressions like:
if ((inst->src[1].type == BRW_REGISTER_TYPE_F &&
inst->src[1].imm.f == 1.0) ||
((inst->src[1].type == BRW_REGISTER_TYPE_D ||
inst->src[1].type == BRW_REGISTER_TYPE_UD) &&
inst->src[1].imm.u == 1)) {
Instead, you simply get to write inst->src[1].is_one(). Simple.
Also, this makes the FS backend match the VS backend (which has these).
This patch also converts opt_algebraic to use the new helper functions.
As a consequence, it will now also optimize integer-typed expressions.
Reviewed-by: Eric Anholt <eric@anholt.net>
The use-after-free happened when the renderbuffer was shared by multiple
contexts and we tried to delete the renderbuffer using a context which
was previously deleted.
Note: this is a candidate for the stable branches.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
To fix a pipe_context::surface_destroy() use-after-free problem.
We previously added pipe_sampler_view_release() for similar reasons.
Note: this is a candidate for the stable branches.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
We sometimes need a rendering context when deleting renderbuffers.
Pass it explicitly instead of trying to grab a current context
(which might be NULL). The next patch will make use of this.
Note: this is a candidate for the stable branches.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
We used to invalidate the drawable after a call to eglSwapBuffers(),
so that a wl_egl_window_resize() would take effect for the next frame.
However, that leads to calling dri2_get_buffers() when eglMakeCurrent()
is called with the current context and surface, and a later call to
wl_egl_window_resize() would not take effect until the next buffer
swap.
Instead, add a callback from wl_egl_window_resize() back to the wayland
egl platform, and invalidate the drawable only when it is resized.
This solves a bug on wayland clients when going back to windowed mode
from fullscreen when clicking a pop up menu, where the window size
after this would be the fullscreen size.
Note: this is a candidate for stable branches.
CC: wayland-devel@lists.freedesktop.org
Completely forgot about updating Makefile when removing it. Stephane
already fixed the make build, but there were a few mentions of
lp_tile_soa left in the tree.
The gen4 simd16 workaround looks at ir->type to determine how much
storage to allocate for the simd16 value. In fragment programs,
texturing only ever returns float vec4s (unlike GLSL, which can also
have scalar floats or vector integers), so this is the right type.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56962
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We need to rebase colors (ex: set G=B=0) when getting GL_LUMINANCE
textures in following cases:
1. If the luminance texture is actually stored as rgba
2. If getting a luminance texture, but returning rgba
3. If getting an rgba texture, but returning luminance
A similar fix was pushed by Brian Paul for uncompressed textures
in commit: f5d0ced.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=47220
Observed no regressions in piglit and ogles2conform due to this fix.
This patch will cause failures in intel oglconform pxconv-gettex,
pxstore-gettex and pxtrans-gettex test cases. The cause of failures
is a bug in test cases. Expected luminance value is calculted
incorrectly in test cases: L = R+G+B.
V2: Set G = 0 when getting a RG texture but returning luminance.
Note: This is a candidate for stable branches.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <idr@freedesktop.org>
Drop these from the known limitations list since support was recently added
for these.
Also, fix a typo while in the area, (and the oddly missing final newline).
Reviewed-by: Matt Turner <mattst88@gmail.com>
This test file is very similar to test 113-line-and-file-macros but uses token
pasting for cleaner quiz answers (without spaces between the digits). This
test passes thanks to the recent addition of support for pasting INTEGER
tokens, (but would have failed without that).
(Note that this test is distinct from test 059-token-pasting-integer which
pastes integers parsed from the source. Those are parsed to INTEGER_STRING
tokens and are already pasted correctly as verified by that test. The only way
to generate the INTEGER tokens which currently fail to paste is with an
internal define such as __LINE__ that results in an integer.)
Reviewed-by: Matt Turner <mattst88@gmail.com>
As recently tested in the additions to the invalid paste test, it is illegal
to paste a non-digit sequence onto the end of an integer.
The 082-invalid-paste test should now pass again.
Reviewed-by: Matt Turner <mattst88@gmail.com>
The current code lets a few invalid pastes through, such as an string pasted
onto the end of an integer. Extend the invalid-paste test to catch some of
these.
Reviewed-by: Matt Turner <mattst88@gmail.com>
This time creating a new _token_list_create_with_one_integer function
modeled after the existing _token_list_create_with_one_space function
(both implemented with new _token_list_create_with_one_ival).
Reviewed-by: Matt Turner <mattst88@gmail.com>
This function is getting a little long too read. Simplify it by pulling
up one assignment from every condition.
Reviewed-by: Matt Turner <mattst88@gmail.com>
These tokens are easy to expand by just looking at the current, tracked
location values, (and no need to look anything up in the hash table).
Add a test which verifies __LINE__ with several values, (and verifies __FILE__
for the single value of 0). Our testing framework isn't sophisticated enough
here to have a test with multiple file inputs.
This commit fixes part of es3conform's preprocess16_frag test.
Reviewed-by: Matt Turner <mattst88@gmail.com>
This should help avoid confusion now that we're using the gl_api enum
to distinguishing between core and compatibility API's. The
corresponding enum value for core API's is API_OPENGL_CORE.
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Matt Turner <mattst88@gmail.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
The current implementation was close by not fully correct: several
operations that should be done in floating point were being done in
integer.
Fixes piglit fbo-clear-formats GL_ARB_texture_float
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
untested (couldn't get the piglit test to run even with version overrides)
but seemed blatantly wrong.
In any case it would only affect an error case which when it would happen
probably all hope is lost anyway.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
This adds array (1d,2d) texture support to llvmpipe.
Though probably should do something about 1d array textures requiring gobs
of memory (this issue is not strictly limited to arrays but it is probably
worse there).
Initial code by Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Support 1d and 2d array textures (including shadow samplers),
and (as a side effect mostly) also shadow cube samplers.
Seems to pass the relevant piglit tests both for sampling and rendering
to (though some require version overrides).
Since we don't support render target indices rendering to array textures
is still restricted to a single layer at a time.
Also, the min/max layer in the sampler view (which is unnecessary for GL)
is ignored (always use all layers).
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Now dead code.
Also had to remove the show_tiles/show_subtiles because now the color
buffers are always stored in their native format, so there is no longer
an easy way to paint the tile sizes.
Depth-stencil buffers are still swizzled.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Update llvmpipe_is_format_supported and llvmpipe_is_format_unswizzled
so that only the formats that we can render without swizzling are
advertised.
We can still render all D3D10 required formats except
PIPE_FORMAT_R11G11B10_FLOAT, which needs to be implemented in a future
opportunity.
Removal of rendertarget swizzling will be done in a subsequent change.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
It is buggy (it was giving wrong results for some of the formats with
padding), and util_format_description::is_array already does precisely
what's intended.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
This is what we want in practice.
The only change is in PIPE_FORMAT_R8SG8SB8UX8U_NORM, which no longer is
considered an array format.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
This patch fixes various format manipulation for big-endian
architectures.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
This patch fixes various format manipulation for big-endian
architectures.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
This patch adds two more functions in type conversions header:
* lp_build_bswap: construct a call to llvm.bswap intrinsic for an
element
* lp_build_bswap_vec: byte swap every element in a vector base on the
input and output types.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
This patch fixes the vector constant generation used for vector shuffle
for big-endian machines.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
This patch enforces the clear of NJ bit in VSCR Altivec register so
denormal numbers are handles as expected by IEEE standards.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
This patch adds Altivec intrinsics for float vector types. It changes
the SSE specific definitions to a platform neutral and adds the calls
to Altivec intrinsic builder.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
This patch add correct vector addition and substraction intrisics when
using Altivec with PPC. Current code uses default path and LLVM backend
ends up issuing carry-out arithmetic instruction while it is expected
saturated ones.
It also includes a fix for PowerPC where char are unsigned by default,
resulting in bogus values for vector shifting.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
This patch adds PPC Altivec support for pack/unpack operations using Altivec
supported vector type (8xi8, 16xi16, 4xi32, 4xf32).
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
The brw_compile structure contains the brw_instruction store and the
brw_eu_emit.c state tracking fields. These are only useful for the
final assembly generation pass; the earlier compilation stages doesn't
need them.
This also means that the code generator for future hardware won't have
access to the brw_compile structure, which is extremely desirable
because it prevents accidental generation of Gen4-7 code.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Compiling shaders requires several main steps:
1. Generating VS IR from either GLSL IR or Mesa IR
2. Optimizing the IR
3. Register allocation
4. Generating assembly code
This patch splits out step 4 into a separate class named "vec4_generator."
There are several reasons for doing so:
1. Future hardware has a different instruction encoding. Splitting
this out will allow us to replace vec4_generator (which relies
heavily on the brw_eu_emit.c code and struct brw_instruction) with
a new code generator that writes the new format.
2. It reduces the size of the vec4_visitor monolith. (Arguably, a lot
more should be split out, but that's left for "future work.")
3. Separate namespaces allow us to make helper functions for
generating instructions in both classes: ADD() can exist in
vec4_visitor and create IR, while ADD() in vec4_generator() can
create brw_instructions. (Patches for this upcoming.)
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Final code generation should never fail. This is a bug, and there
should be no user-triggerable cases where this could occur.
Also, we're not going to have a fail() method after the split.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
The brw_compile structure is closely tied to the Gen4-7 hardware
encoding. However, do_vs_prog is very generic: it just calls out to
get a compiled program and then uploads it.
This isn't ultimately where we want it, but it's a step in the right
direction: it's now closer to the code generator.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
During compilation, we allocate a bunch of things: the IR needs to last
at least until code generation...and then the program store needs to
last until after we upload the program.
For simplicity's sake, just keep it all around until we upload the
program. After that, it can all be freed.
This will also save a lot of headaches during the upcoming refactoring.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
We used to steal it out of the brw_compile struct, but that won't be
initialized in time soon (and is eventually going away).
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
We used to steal it out of the brw_compile struct...but vec4_visitor
isn't going to have one of those in the future.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
This leaves only the final code generation stage in brw_vec4_emit.cpp,
moving the payload setup, run(), and brw_vs_emit functions to brw_vec4.cpp.
The fragment shader backend puts these functions in brw_fs.cpp, so this
patch also helps with consistency.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
I ran across this while running a glGenerateMipmap() test.
_meta_GenerateMipmap sets MESA_META_TRANSFORM, which causes
_mesa_meta_begin to try and set a default orthographic projection.
Unfortunately, if the drawbuffer isn't set up, ctx->DrawBuffer->Width
and Height are 0, which just causes an GL_INVALID_VALUE error.
Fixes oglconform's fbo/mipmap.automatic, mipmap.manual, and
mipmap.manualIterateTexTargets.
Reviewed-by: Brian Paul <brianp@vmware.com>
The rest of the plumbing was in place already.
I have tested this by turning on all GL 3.1 features.
The drivers not supporting GL 3.1 will fail to create a core profile
as they should.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Add a DEBUG_FREED_MEMORY option to help catch use-after-free errors.
Add debug_memory_check() function which can be periodically called to
check that all known blocks are good.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Will allow formats with padding, e.g. RGBX.
Will now allow swizzled formats as long as the alpha is channel 3.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
And add test cases to ensure that this works
- 110 verifies that glcpp rejects #elif<digits> which glcpp
previously accepted.
- 111 verifies that glcpp accepts #if followed immediately by
(, +, -, !, or ~.
- 112 does the same as 111 but for #elif.
See 17f9beb6 for #if change.
Reviewed-by: Carl Worth <cworth@cworth.org>
radeonsi now supports Z16 and doesn't fail these assertions anymore.
This partially reverts commit 7bba4879bb, but
leaves the error messages in place to allow diagnosing such problems even with
non-debugging builds.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes this SCons build error on Mac OS X if X11 is found.
NameError: name 'ws_xlib' is not defined:
File "SConstruct", line 144:
duplicate = 0 # http://www.scons.org/doc/0.97/HTML/scons-user/x2261.html
File "scons-2.2.0/SCons/Script/SConscript.py", line 614:
return method(*args, **kw)
File "scons-2.2.0/SCons/Script/SConscript.py", line 551:
return _SConscript(self.fs, *files, **subst_kw)
File "scons-2.2.0/SCons/Script/SConscript.py", line 260:
exec _file_ in call_stack[-1].globals
File "src/SConscript", line 34:
SConscript('gallium/SConscript')
File "scons-2.2.0/SCons/Script/SConscript.py", line 614:
return method(*args, **kw)
File "scons-2.2.0/SCons/Script/SConscript.py", line 551:
return _SConscript(self.fs, *files, **subst_kw)
File "scons-2.2.0/SCons/Script/SConscript.py", line 260:
exec _file_ in call_stack[-1].globals
File "src/gallium/SConscript", line 135:
'targets/libgl-xlib/SConscript',
File "scons-2.2.0/SCons/Script/SConscript.py", line 614:
return method(*args, **kw)
File "scons-2.2.0/SCons/Script/SConscript.py", line 551:
return _SConscript(self.fs, *files, **subst_kw)
File "scons-2.2.0/SCons/Script/SConscript.py", line 260:
exec _file_ in call_stack[-1].globals
File "src/gallium/targets/graw-xlib/SConscript", line 9:
ws_xlib,
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
According to the ARB_vertex_type_2_10_10_10_rev specification:
"The error INVALID_ENUM is generated by VertexP*, NormalP*,
TexCoordP*, MultiTexCoordP*, ColorP*, or SecondaryColorP if <type>
is not UNSIGNED_INT_2_10_10_10_REV or INT_2_10_10_10_REV."
Fixes 7 subcases of oglconform's packed-vertex test.
v2: Add "gl" prefix to error messages (pointed out by Brian).
Also rebase atop the ctx plumbing.
Reviewed-by: Brian Paul <brianp@vmware.com>
Traditionally, OpenGL has had two separate equations for converting from
signed normalized fixed-point data to floating point data. One was used
primarily for vertex data, while the other was primarily for texturing
and framebuffer data.
However, ES 3.0 and GL 4.2 change this, declaring there's only one
equation to be used in all cases. Unfortunately, it's the other one.
v2: Correctly convert 0b10 to -1.0, as pointed out by Chris Forbes.
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
The rules for converting these values actually depend on the current
context API and version. The next patch will implement those changes.
v2: Mark ctx as const, as suggested by Brian.
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Fixes part of es3conform's transform_feedback_init_defaults test.
NOTE: This is a candidate for the stable branch.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
v2: Perform this count the same way as elsewhere in this file, per
Brian Paul's review.
Fixes part of es3conform's transform_feedback_init_defaults test.
NOTE: This is a candidate for the stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
Previously this function would assert if the format didn't fit an expected 4 channel format size.
Now will work with any format type with any amount of channels.
Signed-off-by: José Fonseca <jfonseca@vmware.com>
The brw_compile structure contains the brw_instruction store and the
brw_eu_emit.c state tracking fields. These are only useful for the
final assembly generation pass; the earlier compilation stages doesn't
need them.
This also means that the code generator for future hardware won't have
access to the brw_compile structure, which is extremely desirable
because it prevents accidental generation of Gen4-7 code.
v2: rzalloc p, as suggested by Eric.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Compiling shaders requires several main steps:
1. Generating FS IR from either GLSL IR or Mesa IR
2. Optimizing the IR
3. Register allocation
4. Generating assembly code
This patch splits out step 4 into a separate class named "fs_generator."
There are several reasons for doing so:
1. Future hardware has a different instruction encoding. Splitting
this out will allow us to replace fs_generator (which relies
heavily on the brw_eu_emit.c code and struct brw_instruction) with
a new code generator that writes the new format.
2. It reduces the size of the fs_visitor monolith. (Arguably, a lot
more should be split out, but that's left for "future work.")
3. Separate namespaces allow us to make helper functions for
generating instructions in both classes: ADD() can exist in
fs_visitor and create IR, while ADD() in fs_generator() can
create brw_instructions. (Patches for this upcoming.)
Furthermore, this patch changes the order of operations slightly.
Rather than doing steps 1-4 for SIMD8, then 1-4 for SIMD16, we now:
- Do steps 1-3 for SIMD8, then repeat 1-3 for SIMD16
- Generate final assembly code for both modes together
This is because the frontend work can be done independently, but final
assembly generation needs to pack both into a single program store to
feed the GPU.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Final code generation should never fail. This is a bug, and there
should be no user-triggerable cases where this could occur.
Also, we're not going to have a fail() method in a moment.
v2: Just abort() rather than assert, to cover the NDEBUG case
(suggested by Eric).
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
All we really need is a memory context and the instruction list; passing
a backend_visitor is just convenient at times.
This will be necessary two patches from now.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
The brw_compile structure is closely tied to the Gen4-7 hardware
encoding. However, do_wm_prog is very generic: it just calls out to
get a compiled program and then uploads it.
This isn't ultimately where we want it, but it's a step in the right
direction: it's now closer to the code generator.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
We used to steal it out of the brw_compile struct...but fs_visitor
isn't going to have one of those in the future.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Also change it from a brw_fragment_program to a gl_fragment_program,
since that seems to be what everything wants anyway.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
We can easily recover it from prog, and this makes it clear that we
aren't passing additional information in.
v2: Use an if-statement rather than the ?: operator (suggested by Eric).
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Also, rather than having brw_wm_fs_emit poke at it directly, make it a
parameter to the fs_visitor constructor.
All other changes generated by search and replace (with occasional
whitespace fixup).
v2: Make dispatch_width const (as suggested by Paul); fix doxygen
mistake (pointed out by Eric); update for rebase.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Now that we only have the one backend, there's no real point in keeping
this separate. Moving it should allow some future simplifications.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Everybody determines this by checking if fp's OutputsWritten field
contains the FRAG_RESULT_DEPTH bit. Rather than having payload setup
check this and set the computes_depth flag, we can just do the check in
the only place that actually used it: emit_fb_writes().
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
No longer have to split fetching into quads dynamically if mip levels
are not the same for all quads (aos sampling still always splits due
to performance reasons).
Instead handle multiple mip levels further down, minification etc. takes
this into account.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
This also adds some code to handle per-quad lods for more than 4-wide fetches,
because otherwise I'd have to integrate the texelFetch function into
the splitting stuff... (but it is not used yet outside texelFetch).
passes piglit fs-texelFetch-2D, fails fs-texelFetchOffset-2D due to I believe
a test error (results are undefined for out-of-bounds fetches, we return
whatever is at offset 0, whereas the test expects [0,0,0,1]).
Texel offsets are only handled by texelFetch for now, though the interface
can handle it for everything.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
v2 (Kayden): Move the enable into an existing intel->gen >= 4 block
(as suggested by Ian).
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Implements BGRA swizzle, sign recovery, and normalization
as required by ARB_vertex_type_10_10_10_2_rev.
V2: Ported to the new VS backend, since that's all that's left;
fixed normalization.
V3: Moved fixups out of the GLSL-only path, so it works for FF/VP too.
V4 (Kayden): Rework ES3 normalization, don't heap allocate registers;
tidy comments.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Flag the need for various workarounds to be applied by
the vertex shader.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Next few patches build on this to add other workarounds
for packed formats.
V2: rename BRW_ATTRIB_WA_COMPONENTS to BRW_ATTRIB_WA_COMPONENT_MASK;
V3 (Kayden): remove separate bit for ES3 signed normalization
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Always use R10G10B10A2_UINT; Most of the other formats we'd like
don't actually work on the hardware. Will emit w/a for scaling,
sign recovery and BGRA swizzle in the VS.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Until we have proper 'make dist' this is an improvement of the current
situation, because each time some old Makefiles got converted to automake
we had to update the tarballs target.
NOTE: This is a candidate for the 9.0 branch.
Cc: Eric Anholt <eric@anholt.net>
Acked-by: Matt Turner <mattst88@gmail.com>
We can't support IF statements in 16-wide on these. To get back to 16-wide
for these shaders, we need to support predicate on discard instructions in the
backend IR, which is something we've sort of got on the list to do anyway.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55828
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Commit 774fb90db3 introduced a ralloc context to
each user of struct brw_compile, but for this one a NULL context was used,
causing the later ralloc_free(mem_ctx) to not do anything.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55175
NOTE: This is a candidate for the stable branches.
We have a special case where non-shadow comparison with LOD requires using a
SIMD16 vec4 in an 8-wide shader, which appears in the register allocator as a
size 8 vgrf.
Fixes assertions in various piglit tests and webgl conformance.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56521
Since a signed 2-bit integer can only represent -1, 0, or 1, it is
tempting to simply to convert it directly to a float. This maps it
onto the correct range of [-1.0, 1.0]. However, it gives different
values compared to the usual equation:
(2.0 * 1.0 + 1.0) * (1.0 / 3.0) = +1.0 (same)
(2.0 * 0.0 + 1.0) * (1.0 / 3.0) = +0.33333333... (different)
(2.0 * -1.0 + 1.0) * (1.0 / 3.0) = -0.33333333... (different)
According to the GL_ARB_vertex_type_2_10_10_10_rev extension, signed
normalization is performed using equation 2.2 from the GL 3.2
specification, which is:
f = (2c + 1)/(2^b - 1). (2.2)
Comments below that equation state: "In general, this representation is
used for signed normalized fixed-point parameters in GL commands, such
as vertex attribute values." Which is what we're doing here.
The 3.2 specification goes on to declare an alternate formula:
f = max{c/(2^(b-1) - 1), -1.0} (2.3)
which is closer to the existing code, and maps the end points to exactly
-1.0 and 1.0. Comments below the equation state: "In general, this
representation is used for signed normalized fixed-point texture or
framebuffer values." Which is *not* what we're doing here.
It then states: "Everywhere that signed normalized fixed-point
values are converted, the equation used is specified." This is the real
clincher: the extension explicitly specifies that we must use equation
2.2, not 2.3. So we need to do (2x + 1) / 3.
This matches the behavior expected by oglconform's packed-vertex test,
and is correct for desktop GL (pre-4.2). It's not correct for ES 3.0,
but a future patch will correct that.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Marek Olšák <maraeo@gmail.com>
For the 10-bit components, the divisor was incorrect. A 10-bit signed
integer can represent -2^9 through 2^9 - 1, which leads to the following
ranges:
(float)value.x -> [ -512, 511]
2.0F * (float)value.x -> [-1024, 1022]
2.0F * (float)value.x + 1.0F -> [-1023, 1023]
So dividing by 511 would incorrectly scale it to approximately:
[-2.001956947, 2.001956947]. To correctly scale to [-1.0, 1.0], we need
to divide by 1023.
This correctly implements the desktop GL rules. ES 3.0 has different
rules, but those will be implemented in a separate patch.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Marek Olšák <maraeo@gmail.com>
The bug was found by Coverity.
NOTE: This is a candidate for the stable branches.
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This gives us checking of our arguments (no more passing 1 operand to
BRW_OPCODE_MUL!), at the cost of a couple of extra parens.
v2: Rebase on gen6-if fix.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v1)
This was a regression in the brw_fs_fp.cpp change. We just need to return
something good enough to get the IR generation to the end without crashing,
but ir->type isn't initialized and we wanted something of the coordinate's
type anyway.
Fixes around 30 piglit cases on my ilk system in drawpixels and framebuffer
blit.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56962
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The theory of the guardband is that you extend the clip volume to avoid
expensive clipping computation, and just let fragments outside the viewport
get clipped by the drawable's bounds. But if a smaller-than-window-size
viewport is set, and we don't also happen to have a scissor set, then
rendering could incorrectly extend outside of the viewport when it should have
been clipped to the viewport.
Fixes the new piglit triangle-guardband-viewport test.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
NOTE: This is a candidate for the 9.0 branch.
When you're comparing to the spec, you're trying to immediately see what
numbered dword of the packet your bit ends up in.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
NOTE: This is a candidate for the 9.0 branch.
All Intel code is compiled with -std=c99. There is no excuse to not use
designated initializers.
As a nice benefit, the code is now more friendly to grep. Without
designated initializers, psychic prowess is required to find the
initialization of DRI extension function pointers with grep. I have
observed several people, when they first encounter the DRI code, fail at
statically chasing the DRI function pointers due to this problem.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
The dri directory is compiled with -std=c99. There is no excuse to not use
designated initializers.
As a nice benefit, the code is now more friendly to grep. Without
designated initializers, psychic prowess is required to find the
initialization of DRI extension function pointers with grep. I have
observed several people, when they first encounter the DRI code, fail at
statically chasing the DRI function pointers due to this problem.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
For a packed depth/stencil buffer on separate stencil hardware, the
separate depth miptree is set up with alignment of 4,4 and the separate
stencil miptree is setup with alignment of 8,8. We can't just use the
irb->draw_{x,y} offsets for stencil, since that is the offset in the
depth miptree.
Fixes 12 piglit depthstencil testcases on ivb.
Acked-by: Chad Versace <chad.versace@linux.intel.com>
Given that we have the mask information here (assuming the rebase is to
the same tiling, which is safe), we can just save a set of miptrees and
offsets and the global intra-tile offset in the context and cut out a
bunch of logic. This will also save emitting the next fix I need to do
twice.
Acked-by: Chad Versace <chad.versace@linux.intel.com>
Fixes a theoretical problem where we had an aligned depth buffer and a
misaligned stencil buffer with a matching tile offset, so we would fail
to rebase depth even after the needed tile offset changed due to the
rebase of stencil.
It should also fix double-rebase of a misaligned packed depth/stencil
renderbuffer, which may have been a performance issue.
Acked-by: Chad Versace <chad.versace@linux.intel.com>
We were always passing 0 for one of the two fields, and the code just used
whichever one wasn't 0.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
I noticed these in the next patch where these paths were using the Face
of a teximage but didn't have array handling.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Apparently this was accidentally marked as unimplemented, and thus not
put in the dispatch table.
Fixes 7 es3conform tests:
- copy_buffer_parameters
- copy_buffer_data
- copy_buffer_usage
- pixel_buffer_object_bind
- pixel_buffer_object_parameteriv
- pixel_buffer_object_texture_read
- pixel_buffer_object_usage
v2: Also update the DispatchSanity test for this change.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Only legacy OpenGL allows the use of non-gen'd names. Core profiles
and ES 3 both require the use of glGenQueries().
Note that BeginQuery doesn't exist in ES 1 or ES 2.
Fixes es3conform's occlusion_query_invalid_beginquery test.
Reviewed-and-tested-by: Matt Turner <mattst88@gmail.com>
GL_READ_FRAMEBUFFER and GL_DRAW_FRAMEBUFFER are valid targets in ES 3.
Fixes 23 es3conform framebuffer_blit tests. Two more go from fail to
crash, but that appears to be because they actually run now.
Reviewed-and-tested-by: Matt Turner <mattst88@gmail.com>
Calling glTexParameteri() with pname GL_TEXTURE_MAX_LEVEL and either a
target of GL_TEXTURE_RECTANGLE or a negative value previously generated
GL_INVALID_OPERATION. However, GL_INVALID_VALUE seems more appropriate.
Fixes oglconform's api-error/negative.glTexParameter and es3conform's
sgis_texture_lod_basic_error.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-and-tested-by: Matt Turner <mattst88@gmail.com>
The new brw_reg always had type BRW_REGISTER_TYPE_F, rather than
inheriting the original type of the ATTR file register.
In the past, this hasn't been a problem since we only execute this code
when fixing up GL_FIXED attributes, which always have float types.
However, we'll soon be using it for ARB_vertex_type_10_10_10_2 support,
which uses D and UD types.
Reviewed-by: Eric Anholt <eric@anholt.net>
For GLES1 and GLES2, brwCreateContext neglected to validate the requested
context version received from the DRI layer. If DRI requested an OpenGL
ES2 context with version 3.9, we provided it one.
Before this fix, the switch statement that validated the requested GL
context flavor was an ugly #ifdef copy-paste mess. Instead of reproducing
the copy-past-mess for GLES1 and GLES2, I first refactored it. Now the
switch statement is readable.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
It seems that -NDEBUG and other flags might still be leaked through
those variables, so strip those off there as well.
NOTE: This is a candidate for the 9.0 branch.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
In addition to registers used by instructions, fs_visitor maintains
direct references to certain "special" values used for inputs/outputs.
When I added VGRF compaction, I overlooked these, believing that these
direct references weren't used once instructions were generated. That
was wrong. For example, pixel_x/y are used in virtual_grf_interferes(),
which is called by optimization passes and register allocation.
This patch treats all of them as used and patches them after compacting.
While it's not strictly necessary to patch all of them (as some aren't
used after emitting code), it seems safer to simply fix them all.
Fixes oglconform's textureswizzle/advanced.shader.targets, piglit's
glsl-fs-lots-of-tex, and glean's texCombine on pre-Gen6 hardware.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56790
Reviewed-by: Eric Anholt <eric@anholt.net>
The goal of that change was to skip counting things that aren't actually
outputs from the VS to the FS. However, explicit_location isn't set in
the case of linker-assigned locations (the common case), so basically
varying component counting got disabled. At this stage of the linker,
we've already ensured that var->location is set, so we can just look at
it without worrying.
Fixes i965 assertion failure with the new
piglit glsl-max-varyings --exceed-limits.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=51545
Reviewed-by: Brian Paul <brianp@vmware.com>
The diff looks funny, but it's moving the integer vs non-integer check
below the _mesa_source_buffer_exists() check that ensures
_ColorReadBuffer is non-null, so we get a GL_INVALID_OPERATION instead
of a segfault. This looks like it had regressed in the
_mesa_error_check_format_and_type() changes, which removed the first of
the two duplicated checks for the source buffer. Fixes segfault in the
new piglit ARB_framebuffer_object/negative-readpixels-no-rb.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45877
NOTE: This is a candidate for the stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
Now that we're using the new backend, we may actually put things into push
constants if you have too many uniform values uploaded. Also, correctly
account for texture rectangle params and drop the old special case for the
0.0/1.0 params from the old backend.
MinGW has snprintf.
The patch fixes these warnings with the MinGW SCons build.
src/gallium/auxiliary/util/u_snprintf.c:459:1: warning: no previous prototype for ‘util_vsnprintf’ [-Wmissing-prototypes]
src/gallium/auxiliary/util/u_snprintf.c:1436:1: warning: no previous prototype for ‘util_snprintf’ [-Wmissing-prototypes]
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Tested-by: Brian Paul <brianp@vmware.com>
If an instruction reads from a constant register that contains
immediates using an invalid swizzle, we can avoid generating MOV
instructions to fix up the swizzle by loading the immediates into a
different constant register that can be read using a valid swizzle.
This only affects r300 and r400 cards.
For example:
CONST[1] = { -3.5000 3.5000 2.5000 1.5000 }
MAD temp[4].xy, const[0].xy__, const[1].xz__, input[0].xy__;
========== Before this change would be lowered to: =========
CONST[1] = { -3.5000 3.5000 2.5000 1.5000 }
MOV temp[0].x, const[1].x___;
MOV temp[0].y, const[1]._z__;
MAD temp[4].xy, const[0].xy__, temp[0].xy__, input[0].xy__;
========== After this change is lowered to: ===============
CONST[1] = { -3.5000 3.5000 2.5000 1.5000 }
CONST[2] = { 0.0000 -3.5000 2.5000 0.0000 }
MAD temp[4].xy, const[0].xy__, const[2].yz__, input[0].xy__;
============================================================
This change reduces one of the Lightsmark shaders from 133 to 91
instructions.
v2:
- Fix crash caused by swizzles with only inline constants.
Use per asic golden values.
Programming this register doesn't seem to be strictly
necessary on SI, but programming it wrong leads to
rendering issues or reduced performance so just
go ahead and program the golden values explicitly
to avoid any potential problems down the road.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
For precise lts support I had to do some magic with the library names, which works fine
as long as the libraries from pkg-config are used.
The parts with src/gallium/targets/va-*/Makefile will not apply on the master branch,
but do apply to the 9.0 branch.
NOTE: This is a candidate for the 9.0 branch.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Acked-by: Matt Turner <mattst88@gmail.com>
fixes regression introduced in 9078441072
Targets for making lex.yy.c program_parse.tab.c and program_parse.tab.h
got moved into its own Makefile
Reviewed-by: Matt Turner <mattst88@gmail.com>
This was added in version 22 of the GL_ARB_sync spec.
Fixes gles3conform's sync_error_waitsync_timeout test.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
All the other range checks on index already return the proper error,
INVALID_VALUE.
Fixes gles3conform's instanced_arrays_invalid test.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
brw_optimize.c's brw_opcodes table was a copy of brw_disasm.c's
opcode_descs table, but with an additional field: is_arith. Now that
I've deleted that, the two are identical. Keep the one in brw_disasm.c.
Reviewed-by: Eric Anholt <eric@anholt.net>
All users of basic block analysis simply create their own local
variables. Nobody uses the visitor-wide field.
Reviewed-by: Eric Anholt <eric@anholt.net>
The old brw_remove_grf_to_mrf_moves() pass is obsolete and replaced by
fs_visitor::compute_to_mrf().
The old brw_remove_duplicate_mrf_moves() pass is obsolete and replaced
by fs_visitor::remove_duplicate_mrf_writes().
The remaining pass, brw_set_dp4_dependency_control(), is currently
unused, but could be, so I'm leaving it for now.
Reviewed-by: Eric Anholt <eric@anholt.net>
At this point, it's just gl_shader_program. Nobody even uses it; even
the program that creates them only returns gl_shader_program pointers.
Reviewed-by: Eric Anholt <eric@anholt.net>
The passthrough pipeline needs to check index values (which might be passed
through) as they can be invalid (which causes crashes and various assertion
failures if the clip code runs). Obviously, rendering won't be well-defined,
but those bogus indices might come directly from apps.
There were already debug printfs which reported the out-of-bounds indices but
we really ought to not crash.
While checking at that point doesn't seem like the most efficient solution,
it seems there isn't really another appropriate function to do it.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Assert the the CB format is valid and default to
the INVALID hw format rather than ~0U when the format
doesn't match for non-debug builds.
v2: use INVALID hw format rather than ~0U
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Assert that the DB format is valid and default to
the INVALID hw format rather than ~0U when the format
doesn't match for non-debug builds.
v2: use INVALID hw format rather than ~0U
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
This is necessary for backwards compatibility with pre-SI for stencil.
Fixes a number of stencil related piglit tests, and real apps using stencil.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
On Gen6-7, we don't compact clip planes, and nr_userclip_plane_consts
is the last bit set, so iterating from i = 0..nr_userclip_plane_consts
covers all active clip planes and is the right thing to do.
works and is the right thing to do.
However, that doesn't work at all on Gen4-5. Since we don't compact
clip planes, we skip over ones which aren't active (via the continue
statement). We also set set nr_userclip_plane_consts to the number of
active clip planes, which means that we end the loop after checking that
many bits. If the set of clip planes wasn't contiguous, this means we'd
fail to find the last few.
By changing the iteration to MAX_CLIP_PLANES, we correctly find all of
the active clip planes.
Fixes regressions since 66c8473e02 (replacing the old VS backend) in
Piglit's spec/glsl-1.20/execution/clipping/fixed-clip-enables and
oglconform's mustpass(basic.clip) and userclip(basic.allCases).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56791
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
There's no compaction, so we can drop that code and simply use 'i'.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Since Gen4-5 compacts clip planes and Gen6-7 doesn't, it makes sense to
split them into separate code paths. This patch simply copies the code
to both halves; the next commits will simplify it.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
The previous 1023-entry chaining hash table never resized, so it was very
inefficient when there were many objects live. While one could have an even
more efficient implementation than this (keep an array for genned names with
packed IDs, or take advantage of the fact that key == hash or key ==
*(uint32_t *)data to store less data), this is fairly fast, and I want a nice
replacement hash table for other parts of Mesa, too.
It improves Minecraft performance 12.3% +/- 1.4% (n=9), dropping hash lookups
from 8% of the profile to 0.5%.
I also tested cairo-gl, which should be a pessimal workload for this hash
table: around 247000 FBOs created and destroyed, only around 65 live at any
time, and few lookups of them between creation and destruction. No
statistically significant performance difference at n=76 (mean 20.3/20.4
seconds, sd 2.8/3.2 seconds). If I remove the >20 seconds outliers that
appear to be due to thermal throttling, there's possibly a .97% +/- 0.31%
performance win (n=61/59). The choice of cutoff for outliers feels a lot like
cooking the data, but I've gone through this process 3 times for minor
iterations of the code with the same conclusion each time.
Reviewed-by: Brian Paul <brianp@vmware.com>
Acked-by: Chad Versace <chad.versace@linux.intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org> (v1)
Mesa's chaining hash table for object names is slow, and this should be much
faster. I namespaced the functions under _mesa_*, to avoid visibility
troubles that we may have had before with hash_table_* functions.
v2: Move .c file to main/, const a few things, clean up loop conditions,
add/extend some comments.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org> (v1)
sparc/clip.c got moved to sparc/sparc-clip.c to avoid doing this workaround in
the parent directory.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v1)
While simplifying mesa/Makefile.am, the more important feature of this commit
is allowing a file with the same name to appear in both main/ and program/.
v2: [chadv] Add changes to Android makefiles.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v1)
Signed-off-by: Chad Versace <chad.versace@linux.intel.com> (v2)
The pair of files src/mesa/Android.mk and src/mesa/Android.gen.mk are too
long and complex to be easily understood. This patch belongs to a series
that decomposes them into several easily digestible makefiles.
This patch move the rules for libmesa_st_mesa.a from Android.mk to
Android.libmesa_st_mesa.mk.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
The pair of files src/mesa/Android.mk and src/mesa/Android.gen.mk are too
long and complex to be easily understood. This patch belongs to a series
that decomposes them into several easily digestible makefiles.
This patch move the rules for libmesa_dricore.a from Android.mk to
Android.libmesa_dricore.mk.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
The pair of files src/mesa/Android.mk and src/mesa/Android.gen.mk are too
long and complex to be easily understood. This patch belongs to a series
that decomposes them into several easily digestible makefiles.
This patch move the rules for host executable mesa_gen_matypes from
Android.mk to Android.mesa_gen_matypes.mk.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
The pair of files src/mesa/Android.mk and src/mesa/Android.gen.mk are too
long and complex to be easily understood. This patch belongs to a series
that decomposes them into several easily digestible makefiles.
This patch move the rules for the host and target libmesa_glsl_utils.a
from Android.mk to Android.libmesa_glsl_utils.mk.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
They were always used with the corresponding *_FILES variables now that
automake handles rule generation.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Array textures were broken.
NOTE: This is a candidate for the stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Array textures were broken.
NOTE: This is a candidate for the stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
It was pretty broken with array textures, where the array size (height or
depth depending on the target) shouldn't be magnified.
The guessing also doesn't fail with 1D and cube textures.
NOTE: This is a candidate for the stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
MaxLog2 led to bugs, because it didn't work well with 1D and 3D textures.
NOTE: This is a candidate for the stable branches.
v2: correct the comment at MaxNumlevels
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This might have a slight overhead but handling mip offsets more like
the width (and image) strides should make some things easier (mip level
being just part of the offset calculation) later.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
This is preparation work for using mip level offsets + base_ptr for texture
sampling instead of per-mip pointers.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
I can never remember what "AB" means, and having to constantly consult
the docs is annoying. Just add comments to the top which explain each
of the abbreviations.
Previously, we used these XML annotations to make the code generation
scripts aware of any instances where the Mesa implementation of a
function had a prefix other than "_mesa_". Now that all of the mesa
implementation functions have been renamed to match the XML, we only
need to handle exec="skip", exec="dynamic", and the default case of
exec="mesa".
Acked-by: Brian Paul <brianp@vmware.com>
Previously, we used the mesa_name XML attribute to make the code
generation scripts aware of any instances where the Mesa
implementation of a function had a different function name suffix than
the primary name in the XML. Now that all of the Mesa implementation
functions have been renamed to match the XML, this attribute is no
longer necessary.
Acked-by: Brian Paul <brianp@vmware.com>
This patch changes the use of const in the type signatures of
_mesa_ShaderSource() and _mesa_TransformFeedbackVaryings(), to match
the type signatures in the GL spec. This avoids warnings when
building the code-generated api_exec.c file.
Note: previously we avoided the build warnings because these functions
were being type-checked against ShaderSourceARB and
TransformFeedbackVaryingsEXT; those functions are semantically
equivalent, but have fewer const qualifiers in their type signatures.
Acked-by: Brian Paul <brianp@vmware.com>
Vector indexing on matrixes generates several copy of the
constant matrix, for instance vec=mat4[i][j] generates :
vec=mat4[i].x;
vec=(j==1)?mat4[i].y;
vec=(j==2)?mat4[i].z;
vec=(j==3)?mat4[i].w;
In the case of constant matrixes, the mat4[i] expression generates
copy of the 16 elements of the matrix 4 times ; indirect addressing
also prevents some conservative CSE algorithms (like the one in LLVM)
from factoring the mat4[i] expression.
This patch will make the vec_index_to_cond pass generates :
temp = mat4[i];
vec=temp.x;
vec=(j==1)?temp.y;
vec=(j==2)?temp.z;
vec=(j==3)?temp.w;
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We were accidentally setting bit 14 in DWord 2 (which is Reserved/MBZ)
rather than bit 14 in DWord 3 (which is AA Line Distance Mode).
There's also no reason to ever set it to legacy mode; the bit is only
used when drawing antialiased lines anyway. Set it unconditionally.
NOTE: This is a candidate for stable branches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
The parameters and operation of this function changed, but I didn't
bother to change the prologue comment.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
This reverts commit 0d61f879a1.
Assigning the FS inputs to the 12 bit field is fine since we don't care
about the higher FS inputs. Maybe I'll revisit silencing the compiler
warning another day.
By moving the HASH_LINE rule out of control_line: and into line:, we avoid
adding control_line's additional \n (as seen in the first hunk).
mattst88: Carl and I determined independently of Fabian that the 091
test needed to be modified identically to this, and our patch to fix the
test was more complicated.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=51506
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Carl Worth <cworth@cworth.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously we were accepting garbage after #else and #endif tokens when
the previous preprocessor conditional evaluated to false (eg, #if 0).
When the preprocessor hits a false conditional, it switches the lexer
into the SKIP state, in which it ignores non-control tokens. The parser
pops the SKIP state off the stack when it reaches the associated #elif,
#else, or #endif. Unfortunately, that meant that it only left the SKIP
state after the lexing the entire line containing the #token and thus
would accept garbage after the #token.
To fix this we use a mid-rule, which is executed immediately after the
#token is parsed.
NOTE: This is a candidate for the stable branch
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56442
Fixes: preprocess17_frag.test from oglconform
Reviewed-by: Carl Worth <cworth@cworth.org> (glcpp-parse.y)
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Brian reported seeing:
r600_texture.c: In function ‘r600_texture_create_object’:
r600_texture.c:468:12: warning: format ‘%llu’ expects type ‘long long unsigned int’, but argument 3 has type ‘uint64_t’
r600_texture.c:468:12: warning: format ‘%llu’ expects type ‘long long unsigned int’, but argument 4 has type ‘uint64_t’
r600_texture.c:485:12: warning: format ‘%llu’ expects type ‘long long unsigned int’, but argument 3 has type ‘uint64_t’
r600_texture.c:485:12: warning: format ‘%llu’ expects type ‘long long unsigned int’, but argument 4 has type ‘uint64_t’
this should wrap over them fine.
Signed-off-by: Dave Airlie <airlied@redhat.com>
This contains the evergreen support.
Support is possible on rv670 upwards and the code in here
should work, but it doesn't and I haven't debugged it to
figure out why.
Beyond just adding support for the cube map array sampling,
r600 resinfo isn't conformant with the GL specification,
which states the number of layers should be returned for
the textureSize, so we have to track in an external
constant buffer the layers for each sampler if we need
them in the shader.
v2: only update the sampler constants if the sampler views have changed,
as suggested by Marek.
Reviewed-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
draw_delete_geometry_shader() seems to be the real one.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
util_pack_z_stencil was being unconditionally invoked for all formats,
causing an assertion failure for Z32_FLOAT_S8X24_UINT.
NOTE: Candidate for the stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Alpha is also 1 for formats like R32G32_FLOAT.
NOTE: Candidate for the stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
We must multiply the factor against the destination, not the source.
NOTE: Candidate for the stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
For drivers with native integer / SM4 support this is just an hindrance.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
The GL_POINT_BIT state attribute GL_POINT_SPRITE_COORD_ORIGIN
is only supported on OpenGL-2.0 or later. Prevent glPopAttrib()
from trying to restore it on OpenGL-1.4 implementations which
support GL_ARB_POINT_SPRITE, as otherwise the sequence...
glPushAttrib(GL_POINT_BIT);
glPopAttrib();
throws an GL_INVALID_ENUM error in glPopAttrib().
See also commit f778174ea1
NOTE: This is a candidate for the 9.0 branch.
Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Since cf438f5375e242, we store actual integers for the attribute data.
We just need to reinterpret the GLfloat array as a GLint/GLuint array
so we can read the proper data.
Fixes oglconform's glsl-vertex-attrib/basic.VertexAttribI[1234][u]i
subtests (after fixing an unrelated bug in those test cases).
v2: Use the COPY_4V macro to be concise.
NOTE: This is a candidate for the stable branches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Marek Olšák <maraeo@gmail.com> [v1]
This adds support to the softpipe texture sampler and tgsi exec.
In order to handle the extra input to the texture sampling,
I've had to expand the interfaces to take a c1 value for storing
the texture compare value for the TEX2 case.
v1.1: add comments (Brian)
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds mesa state tracker support for the new extension,
along with glsl->tgsi conversion to use the new opcodes
where appropriate.
v2: fix assert found running textureSize tests.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just adds the texture target and capability along
with 3 new opcodes required to support this extension.
As this extension requires some texture opcodes with samp + 5 args,
we need to use another src register, this is only required
for TEX, TXL and TXB opcodes to implement this spec.
TEX2 is required for shadow cube map arrays
TXL2 is required for cube map array sampler + explicit lod
TXB2 is required for cube map array sampler + lod bias
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds all the new builtins + the new sampler types,
and hooks them up if the extension is supported.
v2: fix missing signatures for grad/lod
fix missing textureSize clarifications
fix compare vs starts with usage
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds the mesa core + texture + fbo support for the
texture cube map array extension.
v2:
add comment to _mesa_num_tex_faces related to cube map arrays (Brian)
drop wrong comment cut-n-paste (Brian)
fix / 6 maximum check issue (Kenneth)
coalsece some array case statements (Kenneth)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
While developing cube map array support I found that we didn't
support this properly, also piglit didn't test for it at all.
I've submitted a test to piglit to check for this, and this
fixes explicit lod and lod bias with cube maps.
NOTE: This is a candidate for the 9.0 branch.
Signed-off-by: Dave Airlie <airlied@redhat.com>
For cube map arrays I'll need another driver private constant
buffer, and looking forward to UBOs. So clean up with some
defines, that can be modified when adding cube map array and ubos
later.
Signed-off-by: Dave Airlie <airlied@redhat.com>
It is common for complicated shaders, particularly code-generated ones, to
have a big array of uniforms or attributes, and a prologue in the shader that
dereferences from the big array to more informatively-named local variables.
Then there will be some small control flow operation (like a ? : statement),
and then use of those informatively-named variables. We were emitting extra
MOVs in these cases, because copy propagation couldn't reach across control
flow.
Instead, implement dataflow analysis on the output of the first copy
propagation pass and re-run it to propagate those extra MOVs out.
On one future Steam release, reduces VS+FS instruction count from 42837 to
41437. No statistically significant performance difference (n=48), though, at
least at the low resolution I'm running it at.
shader-db results:
total instructions in shared programs: 722170 -> 702545 (-2.72%)
instructions in affected programs: 260618 -> 240993 (-7.53%)
Some shaders do get hurt by up to 2 instructions, because a choice to copy
propagate instead of coalesce or something like that results in a dead write
sticking around. Given that we already have instances of those instructions
in the affected programs (particularly unigine), we should just improve dead
code elimination to fix the problem.
I've no idea why there isn't a piglit that triggers this behaviour,
but while enabling TBOs for softpipe and r600g, I noticed all the
integer tests failed. I tracked it back to the TXF returning a float
when it should be returning an int. This fixed it and I haven't
seen any regressions in a full piglit run on softpipe.
http://bugs.freedesktop.org/55010
NOTE: This is a candidate for the 9.0 branch.
Signed-off-by: Dave Airlie <airlied@redhat.com>
If a frame callback is not destroyed when destroying a surface, its
handler function will be invoked if the surface was destroyed after the
callback was requested but before it was invoked, causing a write on
free:ed memory.
This can happen if eglDestroySurface() is called shortly after
eglSwapBuffers().
Note: This is a candidate for stable branches.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
These were only used for geometry shader support back in the days before
the new GLSL compiler. Future geometry shader support will not use
these.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Fixes a uninitialized pointer read defect reported by Coverity.
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
The new code-generated version of _mesa_create_exec_table() populates
the entire dispatch table (except for dynamic functions) by itself; it
no longer calls separate functions to initialize parts of the dispatch
table. This patch removes those no-longer-needed functions.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This patch adjusts makefiles to cause src/mesa/main/api_exec.c to be
generated using src/mapi/glapi/gen/gl_genexec.py. There should be no
functional change.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This script generates the file api_exec.c, which contains just the
function _mesa_create_exec_table(), based on the XML files in
src/mapi/glapi/gen.
The following XML attributes, in particular, are used:
- "es1" indicates functions that should be available in ES1 contexts.
- "es2" indicates functions that should be available in ES2/ES3
contexts.
- "exec" indicates which Mesa function should be dispatched to. E.g.
if the GL function is glFoo(), then:
- exec="mesa" (the default) dispatches to _mesa_Foo().
- exec="check" dispatches to _check_Foo().
- exec="es" dispatches to _es_Foo().
- exec="loopback" dispatches to loopback_Foo().
- exec="skip" or exec="dynamic" causes this function to be skipped;
either it is not yet supported ("skip"), or its dispatch table
entry will be dynamically populated based on GL state ("dynamic").
- "desktop" indicates functions that should be available in desktop GL
(non-ES) contexts.
- "deprecated" indicates functions that should not be available in
core contexts.
- "mesa_name" indicates functions whose implementation in Mesa has a
different suffix than the corresponding GL function name.
The generated code looks roughly like this (showing just a single
statement in each block for brevity):
struct _glapi_table *
_mesa_create_exec_table(struct gl_context *ctx)
{
struct _glapi_table *exec;
exec = _mesa_alloc_dispatch_table(_gloffset_COUNT);
if (exec == NULL)
return NULL;
if (_mesa_is_desktop_gl(ctx)) {
SET_ActiveProgramEXT(exec, _mesa_ActiveProgramEXT);
/* other functions not shown */
}
if (_mesa_is_desktop_gl(ctx) || _mesa_is_gles3(ctx)) {
SET_BeginQueryARB(exec, _mesa_BeginQueryARB);
/* other functions not shown */
}
if (_mesa_is_desktop_gl(ctx) || ctx->API == API_OPENGLES) {
SET_GetPointerv(exec, _mesa_GetPointerv);
/* other functions not shown */
}
if (_mesa_is_desktop_gl(ctx) || ctx->API == API_OPENGLES || ctx->API == API_OPENGLES2) {
SET_ActiveTextureARB(exec, _mesa_ActiveTextureARB);
/* other functions not shown */
}
if (_mesa_is_desktop_gl(ctx) || ctx->API == API_OPENGLES2) {
SET_AttachShader(exec, _mesa_AttachShader);
/* other functions not shown */
}
if (ctx->API == API_OPENGL) {
SET_Accum(exec, _mesa_Accum);
/* other functions not shown */
}
if (ctx->API == API_OPENGL || ctx->API == API_OPENGLES) {
SET_AlphaFunc(exec, _mesa_AlphaFunc);
/* other functions not shown */
}
if (ctx->API == API_OPENGLES) {
SET_AlphaFuncxOES(exec, _es_AlphaFuncx);
/* other functions not shown */
}
return exec;
}
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This patch updates gl_XML.py to parse the new XML attributes "exec",
"desktop", "deprecated", and "mesa_name", which will be needed to code
generate _mesa_create_exec_table().
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
gl_XML.py's gl_function class keeps track of an entry_point_api_map
property that tracks, for each set of aliased functions, which ES1 or
ES2 version the given function name first appeared in.
This patch aggregates that information together across aliased
functions, into an easier-to-use api_map property.
Future patches will use this information when code generating
_mesa_create_exec_table(), to determine which set of dispatch table
entries should be populated based on the API.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Some of the functions that we store in the dispatch table are declared
as non-static in their .c files and are inserted into the dispatch
table directly by _mesa_create_exec_table(). Other functions are
declared as static, and are inserted into the dispatch table by a
dedicated function that lives in the same .c file
(e.g. _mesa_loopback_init_api_table() in api_loopback.c).
This patch makes all of these functions non-static, and creates
appropriate prototypes for them, so that in future patches we can
populate the entire dispatch table using a single code-generated
function.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
When the XML lists one or more GL api functions as aliases for another
GL function, the mesa function that implements the functionality is
usually named after the canonical version of the function (the one
that is the target of the aliases). For example, FogCoordd is listed
as an alias of FogCoorddEXT, and the Mesa function implementing the
functionality is called loopback_FogCoorddEXT.
However, there are exceptions. For example, Enablei is listed as an
alias of EnableIndexedEXT, but the Mesa function implementing the
functionality is called _mesa_EnableIndexed.
To account for these anomalies, this patch annotates the XML with
"mesa_name" attributes, which describe how to adjust the function name
to find the corresponding Mesa function.
For example:
<function name="EnableIndexedEXT" mesa_name="-EXT">...</function>
<function name="IsProgramNV" mesa_name="-NV+ARB">...</function>
means that EnableIndexedEXT is implemented by a Mesa function called
_mesa_EnableIndexed, and IsProgramNV is implemented by a Mesa function
called _mesa_IsProgramARB.
Future patches will use this annotation when code generating
_mesa_create_exec_table(), to determine the name of the Mesa function
that should be stored in each dispatch table entry.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Future patches will use this annotation when code generating
_mesa_create_exec_table(), to determine which functions should be
skipped when the API is desktop GL.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Future patches will use this annotation when code generating
_mesa_create_exec_table(), to determine which functions should be
dispatched to ES-specific implementations. exec="es" indicates that
the ES-specific implementation has a name beginning with "_es_"
(e.g. _es_QueryMatrixxOES), and exec="check" indicates that the
ES-specific implementation has a name beginning with "_check_"
(e.g. _check_GetTexGenxvOES).
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Future patches will use this annotation when code generating
_mesa_create_exec_table(), to determine which functions should be
dispatched to functions in api_loopback.c.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Future patches will use this annotation when code generating
_mesa_create_exec_table(), to determine which functions should be
skipped because Mesa dispatches them differently depending on GL
state.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Future patches will use this annotation when code generating
_mesa_create_exec_table(), to determine which functions should be
skipped because they aren't implemented by Mesa.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Future patches will use this annotation when code generating
_mesa_create_exec_table(), to determine which functions should be
skipped in core contexts.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
We were already doing this for some GLX extensions, but not others.
This patch makes our use of window_system="glX" consistent.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This patch standardizes the category names used in the glapi XML files
to begin each extension name with the prefix "GL_" or "GLX_". There
is no functional change, because these category names are not used in
the generated code.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This allows the GLES1.1 dispatch sanity test to be run on all builds,
even builds that do not include GLES1 support.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
fragprog_inputs_read is a 12-bit bitfield so check the assigned value.
MSVC warns on the assignment. Not easy to fix but let's do a sanity check.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
The decompression is done in-place and only the compressed tiles are
decompressed. Note: R6xx-R7xx can do that only with Z16 and Z32F.
The texture unit is programmed to use non-displayable tiling and depth
ordering of samples, so that it can fetch the texture in the native DB format.
The latest version of the libdrm surface allocator is required for stencil
texturing to work. The old one didn't create the mipmap tree correctly.
We need a separate mipmap tree for stencil, because the stencil mipmap
offsets are not really depth offsets/4.
There are still some known bugs, but this should save some memory and it also
improves performance a little bit in Lightsmark (especially with low
resolutions; tested with Radeon HD 5000).
The DB->CB copy is still used for transfers.
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
The functions were broken, because they converted ints to floats.
Now we can finally advertise OpenGL 3.0. ;)
In this commit, the vbo module also tracks the type for each attrib
in addition to the size. It can be one of FLOAT, INT, UNSIGNED_INT.
The little ugliness is the vertex attribs are declared as floats even though
there may be integer values. The code just copies integer values into them
without any conversion.
This implementation passes the glVertexAttribI piglit test which I am going
to commit in piglit soon. The test covers vertex arrays, immediate mode and
display lists.
NOTE: This is a candidate for the stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
v2: cosmetic changes as suggested by Brian
Integer textures generate invalid operation in glGenerateMipmap.
So, the code related to integer textures is now redundant.
Note: This is a candidate for stable branches.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Khronos has reached a conclusion and disallowed following texture formats in
glGenerateMipMap():
(a) ASTC textures
(b) integer internal formats (e.g., RGBA8UI, RG16I)
(c) textures with stencil formats (e.g., STENCIL_INDEX8)
(d) textures with packed depth/stencil formats (e.g, DEPTH24_STENCIL8)
https://cvs.khronos.org/bugzilla/show_bug.cgi?id=9471
Note: This is a candidate for stable branches.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
This is part of fixing gl-3.1/genned-names.
v2: Fix a missing return value.
NOTE: This is a candidate for the 9.0 branch.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
It's usually forced to 1 by the surface format, but sometimes we actually have
alpha present because it's the only format available.
Fixes piglit texwrap bordercolor tests for OpenGL 1.1, GL_EXT_texture_sRGB and
GL_ARB_texture_float.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
If the index buffer is full of values like "0 1 2 3", but basevertex is 4, we
need to upload at least vertex data for elements 4 5 6 7. Whether we also
upload 0 1 2 3 is a question of whether there are VBOs present or not -- see
the code setting start_vertex_bias in brw_draw_upload.c.
Fixes piglit draw-elements*base-vertex user_varrays
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Otherwise, if we had a set of prims passed in with a num_instances varying
between them, we wouldn't upload enough (or too much!) from user vertex
arrays.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The brw_draw_upload.c start_vertex_bias code has support for doing the rebase
without rewriting the index buffer by applying a basevertex. It looks like
vbo_rebase_prims() is not equipped to handle basevertex.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We haven't been only tracking raw GRF-GRF moves since the constant propagation
merge, and also the extension for source modifiers and uniforms.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Given that we handle similarly-regioned GRFs registers for our copy
propagation from our UNIFORM file, there's no reason not to allow it.
The shader-db impact is negligible -- +90 instructions total, 2 shaders helped
and 7 hurt (slightly increased register pressure increased spilling), but this
is to prevent regression in other shaders when fixing copy_propagation to
reduce register pressure in the shaders that are hurt here.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
If we put the register coalescing in between the two, then we end up with code
sequences involving dead writes that the dead code elimination doesn't know
how to remove. In place of making dead code elimination smart (which we
should do, too), make it less important for the moment.
shader-db results:
total instructions in shared programs: 722240 -> 721275 (-0.13%)
instructions in affected programs: 50573 -> 49608 (-1.91%)
(no shaders regressed).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
During code generation, we create tons of temporary variables, many of
which get immediately killed and are never used. Later optimization and
analysis passes, such as compute_live_intervals, loop over all the
virtual GRFs. By compacting them, we can save a lot of overhead.
Reduces compilation time in L4D2's largest fragment shader from 10.2
seconds to 5.2 seconds (50%). Drops compute_live_variables() from
10-12% of another game's startup time to 8%.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
The function list was generated from glcorearb.h for GL 4.3.
Note that many GL 4.X functions are commented out, and indicate
that they need to be added to Mesa's XML.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
We also no longer call _swrast_CreateContext, _tnl_CreateContext
or _swsetup_CreateContext when creating the context.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
If a GL function was introduced in a later GL version than the
context we are testing, then it is okay if it is set to the
_mesa_generic_nop function.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
This will be used by GL CORE contexts to differentiate functions that
can be set to nop from functions that are required for a particular
context version.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
This function can be re-added with an actual implementation
when ARB_geometry_shader4 is supported.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
This function can be re-added with an actual implementation
when ARB_geometry_shader4 is supported.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
ProgramParameteri will be required for ARB_geometry_shader4
or GLES3. Don't enable this function until either of those
is supported.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
These functions are part in GL 4.3. Moving this will allow
ProgramParameteriARB to alias ProgramParameteri.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
These EXT_separate_shader_objects function will no longer be
enabled for CORE profiles:
* UseShaderProgramEXT
* ActiveProgramEXT
* CreateShaderProgramEXT
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
This fixes the Android build after the move of builtin_stubs.cpp into
the builtin_compiler subdirectory. This patch is untested.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Note this by itself is not enough to fix scons build -- it will fail
until you remove:
rm -rf build/*/glsl/builtin_compiler
because that node was a filei before, but it will be now a directory.
This also means that bisecting across this change will require wiping
the build directory..
The builtin_compiler binary is used during the build process to generate
code for the builtin GLSL functions. Since this binary needs to be run
on the build host, it must not be cross-compiled.
This patch fixes the build system to compile a second version of the
source files and the builtin_compiler binary itself for the build
system. It does so by defining the CC_FOR_BUILD and CXX_FOR_BUILD
variables, which are searched for by the configure script and point to
the location of native C and C++ compilers.
In order for this to work properly, builtin_function.cpp is removed
from BUILT_SOURCES, otherwise the build system would try to generate it
before having had a chance to descend into the builtin_compiler
subdirectory. With the builtin_compiler and glsl_compiler now being
generated at different stages, the build instructions for glsl_compiler
can be simplified a bit.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Variable indexing of non-uniform arrays only exists in GLSL. Likewise,
OPCODE_CAL/OPCODE_RET only existed to try and support GLSL's function
calls. We don't use Mesa IR for GLSL, and these features are explicitly
disallowed by ARB_vertex_program/ARB_fragment_program and never
generated by ffvertex_prog.c.
Since they'll never happen, there's no need to check for them, which
saves us from walking through all the Mesa IR instructions.
Reviewed-by: Eric Anholt <eric@anholt.net>
Rather than having two separate backends, just create a small layer that
translates the subset of Mesa IR used for ARB_vertex_program and fixed
function programs to the Vec4 IR. This allows us to use the same
optimization passes, code generator, register allocator as for GLSL.
v2: Incorporate Eric's review comments.
- Fix use of uninitialized src_swiz[] values in the SWIZZLE_ZERO/ONE
case: just initialize it to 0 (.x) since the value doesn't matter
(those channels get writemasked out anyway).
- Properly reswizzle source register's swizzles, rather than overwriting
the swizzle.
- Port the old brw_vs_emit code for computing .x of the EXP2 opcode.
- Update comments, removing mention of NV_vertex_program, etc.
- Delete remaining #warning lines and debug comments.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
v2: Properly use "conditionalmod" pre-Gen6, rather than the incorrectly
copy-and-pasted "BRW_CONDITIONAL_G".
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
This will become necessary once we start supporting ARB programs and
fixed function in this backend.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
This patch removes the generated files api_exec_es1.c,
api_exec_es1_dispatch.h, and api_exec_es1_remap_helper.h (and the
source files and build rules used to generate them), since they are no
longer used. GLES1 now uses the same dispatch table layout as all the
other APIs.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This patch modifies context creation code for GLES1 to use
_mesa_create_exec_table() (which is used for all other APIs) instead
of the GLES1-specific _mesa_create_exec_table_es1().
There is a slight change in functionality. As a result of a mistake
in the code generation of _mesa_create_exec_table_es1(), it does not
include glFlushMappedBufferRangeEXT or glMapBufferRangeEXT (this is
because when support for those two functions was added in commit
762d9ac, src/mesa/main/APIspec.xml wasn't updated). With this patch,
glFlushMappedBufferRangeEXT and glMapBufferRangeEXT are properly
included in the dispatch table. Accordingly, dispatch_sanity.cpp is
modified to expect these two functions to be present.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2: Leave GLES1.1 dispatch sanity test disabled when not building
GLES1 support.
Currently, _mesa_create_exec_table() (in api_exec.c) is used for all
APIs except GLES1. In GLES1, _mesa_create_exec_table_es1() (a code
generated function) is used instead.
In principle, this shouldn't be necessary. It should be possible for
api_exec.c to contain the logic for populating the dispatch table for
all API's.
This patch paves the way for using _mesa_create_exec_table() instead
of _mesa_create_exec_table_es1(), by making _mesa_create_exec_table()
(and the functions it calls) expose the correct subset of desktop GL
functions for GLES1.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This patch creates a header querymatrix.h, to allow functions defined
in querymatrix.c to be used from other .c files. It also switches
from the nonstandard GL_APIENTRY to GLAPIENTRY.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2: Don't declare _mesa_Get{Integer,Float}v in querymatrix.c.
Instead, just include main/get.h.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
This patch adds the usual boilerplate (copyright notice and guards
against redundant inclusion) to es1_conversion.h. It also moves the
definition of GL_APIENTRY from es1_conversion.c.
This allows es1_conversion.h to be safely included from other .c files.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2: Use copyright notice from src/mesa/main/es_generator.py (the
script that used to generate this file).
Previously dispatch table-related code was generated from gl_API.xml,
so it did not include slots for GLES1-only functions (such as those
taking fixed-point arguments).
This patch generates dispatch table-related code from
gl_and_es_API.xml, so that GLES1-only functions are included. This
paves the way for future patches that will unify the GLES1 dispatch
table with the dispatch tables for the other APIs.
The following generated files are affected:
- glapi_x86.S
- glapi_x86-64.S
- glapi_sparc.S
- glprocs.h
- glapitemp.h
- glapitable.h
- glapi_gentable.c
- dispatch.h
- remap_helper.h
Since this change affects makefiles, a full rebuild is required.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2: Adjust dependencies to ensure that generated files will be rebuilt
whenever any ES-related XML source files are changed.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Previously, when code-generating aliased functions in glapitemp.h, we
weren't consistent about which function alias we used to obtain the
parameter names, with the risk that we would generate incorrect code
like this:
KEYWORD1 void KEYWORD2 NAME(Foo)(GLint x)
{
(void) x;
DISPATCH(Foo, (x), (F, "glFoo(%d);\n", x));
}
KEYWORD1 void KEYWORD2 NAME(FooEXT)(GLint y)
{
(void) x;
DISPATCH(Foo, (x), (F, "glFooEXT(%d);\n", x));
}
At the moment there are no aliased functions with mismatched parameter
names, so this isn't the problem. But when we introduce GLES1
functions into the dispatch table, there will be
(MapBufferRange/MapBufferRangeEXT). This patch paves the way for that
by fixing the code generation script to handle the mismatch correctly.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
This ensures that GLES1-only typedefs are available in these files.
In a future patch, this will allow us to expand the dispatch table to
include GLES1-only functions.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
In commits bad96f6 and e7dd2e5 I added the following aliases:
- ClampColor -> ClampColorARB
- VertexAttribDivisor -> VertexAttribDivisorARB
But I neglected to update check_table.cpp, causing "make check" to
fail for non-shared-glapi builds.
This patch removes the functions that are now aliased from
check_table.cpp, so that "make check" works correctly again.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
When copy_array_to_vbo_array encountered an array with src_stride == 0
and dst_stride != 0, we would replicate out the single element to the
whole size (max - min + 1). This is unnecessary: we can simply upload
one copy and set the buffer's stride to 0.
Decreases vertex upload overhead in an upcoming Steam for Linux title.
Prior to this patch, copy_array_to_vbo_array appeared very high in the
profile (Eric quoted 20%). After the patch, it disappeared completely.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
This essentially reverts the following:
commit c625aa19cb
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Feb 18 10:37:43 2011 +0000
intel: extend current vertex buffers
While working on optimizing an upcoming Steam title, I broke this code.
Eric expressed his doubts about this optimization, and noted that the
original commit offered no performance data.
I ran before and after benchmarks on Xonotic and Citybench, and found
that this code made no difference. So, remove it to reduce complexity
and make future work simpler.
Reviewed-by: Eric Anholt <eric@anholt.net>
The problem was we set VRAM|GTT for relocations of STATIC resources.
Setting just VRAM increases the framerate 4 times on my machine.
I rewrote the switch statement and adjusted the domains for window
framebuffers too.
NOTE: This is a candidate for the stable branches.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
By removing the array size, the static assertion to check for missing
elements can do its job properly. This will catch cases where a new
Mesa format is added but the swrast texfetch code isn't updated.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
On r6xx/r7xx shader resource management need to make sure that the
shader does not goes over the gpr register limit. Each specific
asic has a maxmimum register that can be split btw shader stage.
For each stage the shader must not use more register than the
limit programmed.
v2: Print an error message when discarding draw. Don't add another
boolean to context structure, but rather propagate the discard
boolean through the call chain.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
This is a regression since b3921e1f53.
The array stores VS outputs, not FS inputs.
Now llvmpipe can do 32 varyings too.
NOTE: This is a candidate for the stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
For Intel, expose it only if gen >= 4.
For Gallium, expose it only if PIPE_CAP_SM3 is advertised.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
v2: update relnotes-9.1
v3: use align_malloc and align_free for malloced buffers in r300g
v4: document the new CAP in the docs
This allows updating only a subrange of buffer bindings.
set_vertex_buffers(pipe, start_slot, count, NULL) unbinds buffers in that
range. Binding NULL resources unbinds buffers too (both buffer and user_buffer
must be NULL).
The meta ops are adapted to only save, change, and restore the single slot
they use. The cso_context can save and restore only one vertex buffer slot.
The clients can query which one it is using cso_get_aux_vertex_buffer_slot.
It's currently set to 0. (the Draw module breaks if it's set to non-zero)
It should decrease the CPU overhead when using a lot of meta ops, but
the drivers must be able to treat each vertex buffer slot as a separate
state (only r600g does so at the moment).
I can imagine this also being useful for optimizing some OpenGL use cases.
Reviewed-by: Brian Paul <brianp@vmware.com>
It was defined as an empty function since Nov 2010 and was ultimately
removed completely.
See xserver commit 1cb0261
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Fixes build error on Cygwin and Solaris. _R, _G, and _B are used in
ctype.h on those platforms.
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
With the explit NUM_TEXTURE_TARGETS array size, the assertion that
Elements(targets) == NUM_TEXTURE_TARGETS would pass even if elements
were missing.
Reviewed-by: Eric Anholt <eric@anholt.net>
Patch adds additional singlesample config with 565 color buffer,
24 bit depth and 8 bit stencil buffer. This makes Quadrant benchmark
work on Android. Tested with Sandybridge and Ivybridge machines.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
This is instead of the pair of GLenums for format and type that were
previously used. This is necessary for the Intel drivers to expose sRGB
framebuffer formats.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
There is no gl_format in Mesa that corresponds to this arrangement, so I
have a very hard time believing that this works.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously, if the server didn't send a GLX_FRAMEBUFFER_SRGB_CAPABLE_EXT
tag, it would still be set to GLX_DONT_CARE (which is -1). Set it to
GL_FALSE instead.
NOTE: This is a candidate for stable release branches.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: Maciej Wieczorek <maciej.t.wieczorek@intel.com>
This fixes an issue where glsl_to_tgsi_visior::get_opcode() would emit the
wrong opcode because the register type was GLSL_TYPE_ARRAY/STRUCT instead of
GLSL_TYPE_FLOAT/INT/UINT/BOOL, so the function would use the float opcodes for
operations on integer or boolean values dereferenced from an array or
structure. Assertions have been added to get_opcode() to prevent this bug
from reappearing in the future.
NOTE: This is a candidate for the stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
The 2x and 4x MSAA cases are completely broken. The lfdptr instruction returns
garbage there.
The 8x MSAA case is broken on Cayman, though at least the result looks somewhat
correct.
Only the 8x MSAA case works on Evergreen and is enabled.
llvm-3.2svn r166772 no longer requires RTTI for lib/Support.
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
LLVM 3.1+ haven't more "extern unsigned llvm::StackAlignmentOverride"
and friends for configuring code generation options, like stack
alignment.
So I restrict assiging of lvm::StackAlignmentOverride and other
variables to LLVM 3.0 only, and wrote similiar code using
TargetOptions.
This patch fix segfaulting of WINE using llvmpipe built with LLVM 3.1
Signed-off-by: Alexander V. Nikolaev <avn@daemon.hole.ru>
Signed-off-by: José Fonseca <jose.r.fonseca@gmail.com>
This is a leftover from when we had to split those two functions due to
the separate BO validation step.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
"Active" is an already-used term for the query being between
glBeginQuery() and glEndQuery(), while this is tracking whether the
start of the packet pair for emitting state has been inserted into the
current batchbuffer.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Put the back face colour right after the front face colour in the LDS parameter
space.
Fixes 18 piglit tests related to two sided lighting.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
It's required. The CP uses this to properly allocate new
contexts. Also do a CS partial flush since we are updating
CONFIG regs which are single state.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Use printf instead of debug_printf to be consistent with print
statements in rest of unit tests.
This also fixes the lack of print output with the MinGW build of
u_format_compatible_test.
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Global initializers using the ?: operator with at least one non-constant
operand generate ir_if statements. For example,
float foo = some_boolean ? 0.0 : 1.0;
becomes:
(declare (temporary) float conditional_tmp)
(if (var_ref some_boolean)
((assign (x) (var_ref conditional_tmp) (constant float (0.0))))
((assign (x) (var_ref conditional_tmp) (constant float (1.0)))))
This pattern is necessary because the second or third arguments could be
function calls, which create statements (not expressions).
The linker moves these global initializers into the main() function.
However, it incorrectly had an assertion that global initializer
statements were only assignments, calls, or temporary variable
declarations. As demonstrated above, they can be if statements too.
Other than the assertion, everything works fine. So remove it.
Fixes new Piglit test condition-08.vert, as well as an upcoming
game that will be released on Steam.
NOTE: This is a candidate for stable release branches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Consider the following code, which reinterprets a register as a
different type:
mov(8) g6<1>F g1.4<0,4,1>.xF
and(8) g5<1>.xUD g6<4,4,1>.xUD 0x7fffffffUD
Copy propagation would notice that we can replace the use of g6 with
g1.4 and eliminate the MOV. Unfortunately, it failed to preserve the UD
type, incorrectly generating:
and(8) g5<1>.xUD g6<4,4,1>.xF 0x7fffffffUD
Found while debugging Ian's uncommitted ARB_vertex_program LOG opcode
test with my new Mesa IR -> Vec4 IR translator.
NOTE: This is a candidate for stable release branches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Consider the following code sequence:
mul(8) g4<1>F g1<0,4,1>.wzwwF g3<4,4,1>.wzwwF
mov.sat(8) m1<1>.xyF g4<4,4,1>F
mul(8) g4<1>F g1<0,4,1>.xxyxF g3<4,4,1>.xxyxF
mov.sat(8) m1<1>.zwF g4<4,4,1>F
The compute-to-MRF pass will discover the first mov.sat and attempt to
replace it by rewriting earlier instructions. Everything works out,
so it replaces scan_inst's destination file, reg, and reg_offset,
resulting in:
mul(8) m1<1>F g1<0,4,1>.wzwwF g3<4,4,1>.wzwwF
mul(8) g4<1>F g1<0,4,1>.xxyxF g3<4,4,1>.xxyxF
mov.sat(8) m1<1>.zwF g4<4,4,1>F
Unfortunately, it loses the .xy writemask on the mov.sat's MRF
destination. While this doesn't pose an immediate problem, it then
proceeds to transform the second mov.sat, resulting in:
mul(8) m1<1>F g1<0,4,1>.wzwwF g3<4,4,1>.wzwwF
mul(8) m1<1>F g1<0,4,1>.xxyxF g3<4,4,1>.xxyxF
Instead of writing both halves of the vector (like the original code),
it overwrites the full vector both times, clobbering the desired .xy
values.
When encountering a MOV, the compute-to-MRF code scans for instructions
which generate channels of the MOV source. It ensures that all
necessary channels are available (possibly written by several
instructions). In this case, *more* channels are available than
necessary, so we want to take the subset that's actually used.
Taking the bitwise and of both writemasks should accomplish that.
This was discovered by analyzing an ARB_vertex_program test
(glean/vertProg1/MUL test (with swizzle and masking)) with my new
Mesa IR -> Vec4 IR translator code. However, it should be possible
with GLSL programs as well.
NOTE: This is a candidate for stable release branches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Previously, we used lookahead patterns to differentiate:
#define FOO(x) function macro
#define FOO (x) object macro
Unfortunately, our rule for function macros:
{HASH}define{HSPACE}+/{IDENTIFIER}"("
relies on infinite lookahead, and apparently triggers a Flex bug where
the generated code overflows a state buffer (see YY_STATE_BUF_SIZE).
There's no need to use infinite lookahead. We can simply change state,
match the identifier, and use a single character lookahead for the '('.
This apparently makes Flex not generate the giant state array, which
avoids the buffer overflow, and should be more efficient anyway.
Fixes piglit test 17000-consecutive-chars-identifier.frag.
NOTE: This is a candidate for every release branch ever.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Carl Worth <cworth@cworth.org>
While copying the values into the batch space, we advance the param
pointer. The debug code then tries to iterate over all the uploaded
values, starting at param...which is now the end of the uploaded data,
rather than the start.
This patch saves a pointer to the start of push constant space before
it gets altered and switches the debug code to use that.
Tested by uncommenting the code and examining the output of
glsl-vs-clamp-1.shader_test. Previously all values appeared to be zero.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Since ES3.0 is backward compatible with 2.0, we check that all the 2.0
functions and additional 3.0 functions exist.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Previously we just printed the dispatch table index and the user had
to convert it to a function name. That was a pain because when
FEATURE_remap_table is defined, the assignment of functions to
dispatch table entries is done at run time.
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Previously this function was only implemented for non-shared-glapi
builds. Since the function is only intended for debugging purposes we
use a simple O(n) algorithm.
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
When specifying per-target CFLAGS (e.g., ralloc_test_CFLAGS) AM_CFLAGS
are not used. AM_CPPFLAGS should be used for includes anyway.
Fixes a build problem since 41b14d125:
CC ralloc_test-ralloc.o
In file included from ../../../src/glsl/ralloc.c:42:0:
../../../src/glsl/ralloc.h:57:27: fatal error: main/compiler.h: No such file or directory
Acked-by: Paul Berry <stereotype441@gmail.com>
Catches problems such as (in the gles3 branch)
glcpp-parse.y: In function '_glcpp_parser_handle_version_declaration':
glcpp-parse.y:1990:39: warning: format '%lli' expects argument of type
'long long int', but argument 4 has type 'int' [-Wformat]
As a side-effect, remove ralloc.c's likely/unlikely macros and just use
the ones from main/compiler.h.
NOTE: This is a candidate for the release branches.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Fixes the problem where configure from the tarball would report missing
files:
$ ./configure
configure: error: cannot find install-sh, install.sh, or shtool in bin
NOTE: This is a candidate for the 9.0 branch.
4bits and 3bits quantitization values differ significantly for
values other than 0 and 1.
Fixes piglit draw-pixels for softpipe/llvmpipe.
NOTE: Probably a candidate for stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
This fixes an issue where glsl_to_tgsi_visior::get_opcode() would emit the
wrong opcode because the register type was GLSL_TYPE_ARRAY/STRUCT instead of
GLSL_TYPE_FLOAT/INT/UINT/BOOL, so the function would use the float opcodes for
operations on integer or boolean values dereferenced from an array or
structure. Assertions have been added to get_opcode() to prevent this bug
from reappearing in the future.
This silences a zillion GCC warnings like:
../../../src/mesa/main/pack.c: In function '_mesa_pack_rgba_span_from_uints':
../../../src/mesa/main/pack.c:560:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
The layer dimension of array textures is not subject to mipmap minification.
OTOH we were missing an assertion for the depth dimension.
Fixes assertion failures with piglit {f,v}s-textureSize-sampler1DArrayShadow.
For some reason, they only resulted in piglit 'warn' results for me, not
failures.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56211
NOTE: This is a candidate for the stable branches.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
cuts down the while loop iterations from 4600 to 380 commits at the
moment
NOTE: This is a candidate for the stable branches.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This function is only useful for the ARB_{vertex,fragment}_program
extensions, which we don't expose in core contexts.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
glGetPointerv was de-deprecated in GL 4.3, because GL 4.3 adds
functionality from KHR_debug and ARB_debug_output, which require
glGetPointerv.
This patch modifies _mesa_create_exec_table() to populate
glGetPointerv in the dispatch table for core contexts.
Technically this is not in compliance with the spec--what we really
ought to do for core contexts is expose glGetPointerv only when a GL
4.3 context is in use or one of the two extensions is present.
However, it seems silly to go to that extra work, since the only
client-visible effect would be for glGetPointerv to raise an
INVALID_OPERATION error instead of an INVALID_ENUM error. Besides,
the other functions set up by _mesa_create_exec_table() only depend on
the API in use, not on the GL version or extensions supported.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
There's no reason to have separate slots in the dispatch table for
these two functions, since they are synonymous.
Note: previous to this patch, we never populated the dispatch table
slot for VertexAttribDivisor, which was ok, since it is not required
until 3.3. After this patch, both functions will be usable provided
that the ARB_instanced_arrays extension is present.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
There's no reason to have separate slots in the dispatch table for
these two functions, since they are synonymous.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
With the previous two commits, this fixes piglit
GL_ARB_occlusion_query2/api.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
There's a similar test below, but it's not the same: that one checks whether
this query object is already active (potentially on another target).
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
We should use the later since we're freeing the memory with free(),
not the gallium FREE() macro.
This fixes a mismatch when using the gallium debug memory functions.
NOTE: This is a candidate for the 9.0 branch.
We need to create bos suitable for cursor usage that we can map and
write data into. The kms dumb ioctls is all we need for this, so drop
the dependency on libkms.
Given the usecase we have of trying to measure timestamps across individual
draw calls, flushing will totally mess up what people are trying to measure.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The theory I had when I wrote the code was that you wanted to minimize latency
on your queries because the app was going to ask soon. Only, it turns out
that everybody batches up their queries and asks for the results later (often
after the next SwapBuffers!), so this was a pessimization.
Until now, I had no workload where it mattered enough to benchmark. Recently
I started playing some Minecraft, which uses tons of queries to decide whether
to render chunks of the terrain. For that app, avoiding the flush in the
query-generation loop improves performance 22.7% +/- 4.7% (n=3) on an apitrace
capture of it (confirmed in game by watching the fps meter found by pressing
F3, 15/16 -> 20/21 fps).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
otherwise some compilers will throw error
"error: format not a string literal and no format arguments"
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
If GL_BASE_LEVEL==0 and GL_MAX_LEVEL==0 that's a pretty good hint that
there'll be a single mipmap level in the texture.
Google Earth sets the texture's state this way before the first glTexImage
call. This saves a bit of texture memory.
Fixes piglit tests "unpack-teximage2d --pbo=* --format=GL_BGRA" on
Sandybridge+.
The fastpath was checking an incomplete set of pixel unpack state. This
patch adds checks for all the fields of gl_pixelstore_attrib that affect
2D texture uploads. Also, it begins permitting the case where
GL_UNPACK_ROW_LENGTH is 0.
Ideally, we would just ask a unicorn to JIT this fastpath for us in
a way that safely handles the unpacking state. Until then, it's safer if
only a small set of situations activate the fastpath.
v2: Use _mesa_is_bufferobj(), per Anholt.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
It doesn't provide the cross-process buffer sharing that a window system
pixmap could otherwise support and we don't have anything left that uses
this type of surface.
The 0.99.0 Wayland release changes the event API to provide a thread-safe
mechanism for receiving events specific to a subsystem (such as EGL) and
we need to use it in the EGL platform.
The Wayland protocol now also requires a commit request to make changes
take effect, issue that from eglSwapBuffers.
Now that we've replaced all the variable settings other than reg_width, it's
easy to hang on to this (the expensive part of setting up the allocator).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Improves performance of the Lightsmark penumbra shadows scene by 15.7% +/-
1.0% (n=15), by eliminating register spilling. (tested by smashing the list of
scenes to have all other scenes have 0 duration -- includes additional
rendering of scene description text that normally doesn't appear in that
scene)
v2: Allow allocation of all but g0/g1 of the payload.
v3: Pull count_to_loop_end() out to a helper function.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v2, recommended v3)
Based on split_virtual_grfs(), we choose the same set every time, so set it in
stone. This will help us avoid regenerating the somewhat expensive
class/register set setup every compile.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This is derived from the FS visitor code for the same, but tracks each channel
separately (otherwise, some typical fill-a-channel-at-a-time patterns would
produce excessive live intervals across loops and cause spilling).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48375
(crash -> failure, can turn into pass by forcing unrolling still)
These messages always have m0 = g0 and m1 = offset, and write has m2 = data.
Avoids regression in opt_compute_to_mrf() with a change to scratch writes to
set up the data as an MRF write in the IR.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Note that BRW_PREDICATE_NONE is 0 and BRW_PREDICATE_NORMAL is 1, so that's a
lot like the true/false we had in the FS before.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
fs_bblock_link -> bblock_link
fs_bblock -> bblock_t (to avoid conflicting with all the fs_bblock *bblock)
fs_cfg -> cfg_t (to avoid conflicting with all the fs_cfg *cfg)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This fixes confusion by the upcoming live variable analysis which saw e.g. use
of temp.w when only temp.xyz were initialized in the basic block, and
concluded that temp.w must have come from outside of the block (even though it
was never initialized anywhere).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Due to a string mismatch, INTEL_swap_event wasn't listed among GLX
extensions for the connection, even when present on both client and
server. That is, glXQueryServerString and glXGetClientString reported the
extension, but glXQueryExtensionsString did not.
Note: This is a candidate for the stable branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56057
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Per commentary and direction in the LLVM community, support for ppc64 is
going into MCJIT rather than the old JIT. There is no existing support
in prior llvm versions, so no need to specify LLVM version numbers.
Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com>
Signed-off-by: José Fonseca <jfonseca@vmware.com>
The GCC c99 standard on Cygwin sets __STRICT_ANSI__ and symbols such as
strdup are not available.
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Note that we are missing the ARB_internalformat_query extension, which
provides the glGetInternalformativ function needed by GL ES 3.0.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
The relevant ES2 code is always in Mesa. Always building the tests
ensures that things aren't accidentally broken when people don't build
with --enable-es2.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This code is twisty, and the comment before most of the blocks was actually
giving me the opposite impression from its intention: We want to apply as much
of our offset as possible through coarse tile-aligned adjustment, since we can
do so independently per buffer, and apply the minimum we can through
fine-grained drawing offset x/y, since it has to agree between all buffers.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
There are a number of places where some obscure piece of the code is not
currently worth fixing, and we have some workaround behavior available. It's
nicer for users to do some lame workaround than to just assert, but without
asserts we never knew when the workaround was at fault.
This should give us a nice compromise: Execute the workaround, but mention
that the obscure workaround was hit.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Note: mapi_abi can consume API information from either XML or a .csv
file. A side effect of this change is that the ES1 and ES2 API
printers can only be used with XML input now. That's ok, since the
.csv input format is only used for the OpenVG API.
Tested-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Previously, the ES1, ES2, and shared GLAPI printers passed a list of
function names to the base class constructor, which was used by the
_override_for_api() function to loop over all the API functions and
adjust their 'hidden' and 'handcode' attributes as appropriate for the
API flavour being code-generated.
This patch lifts the loop from _override_for_api() into its caller,
and makes it into a polymorphic function, so that the derived classes
can customize its behaviour directly. In a future patch, this will
allow us to override the 'hidden' and 'handcode' attributes based on
information from the XML rather than a list of functions.
Tested-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Previously, _get_api_entries() would make a deep copy of each element
in the entries table before modifying the 'hidden' and 'handcode'
attributes. This was unnecessary, since the entries aren't used again
after this function. Removing the copy simplifies the code, because
it is no longer necessary to adjust the alias pointers to point to the
copied entries.
Tested-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Currently mapi_abi.py uses hardcoded lists of function names (in
gles_api.py) to determine which functions need to be included in the
GLES 1 or GLES 2 API. This patch removes a sanity check which
verified that all GLES functions listed in the hardcoded lists were
actually present in the XML.
Later patches in this series will modify mapi_abi.py to determine
which functions need to be included in the GLES 1 or GLES 2 API based
directly on the XML. Once that is done, the sanity check will be
redundant. Removing the sanity check now will simplify the patches to
come.
Tested-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Currently, the set of functions which exist in GLES1 or GLES2 is
determined by hardcoded lists of function names in gles_api.py. This
patch encodes that information into the XML files using new
attributes, es1 and es2.
The es1 attribute denotes the first version of GLES 1 in which the
function exists (e.g. es1="1.1" means the function exists in GLES 1.1
but not GLES 1.0). "none" (the default) means the function is not
available in any version of GLES 1.
The es2 attribute denotes the first version of GLES 2/3 in which the
function exists (e.g. es2="2.0" means the function exists in both GLES
2.0 and GLES 3.0). "none" (the default) means the function is not
available in any version of GLES 2 or GLES 3.
Note that since GLES 3 is a strict superset of GLES 2, there is no
need for a separate attribute for it; instead, 'es2="3.0"' should be
used to denote functions that are present in GLES 3 but not GLES 2.
This patch only adds information about GLES versions 1.0, 1.1, and
2.0.
Later patches will modify the python code generation scripts to use
this information rather than the hardcoded lists in gles_api.py.
Tested-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
An unfortunate quirk of Python 2 is that there are two types of
classes: "classic" classes (which are backward compatible with some
unfortunate design decisions made early in Python's history), and
"new-style" classes. Classic classes have a number of limitations
(for example they don't support super()) and are unavailable in Python
3. There's really no reason to use classic classes, except in
unmaintained legacy code. For more information see
http://www.python.org/download/releases/2.2.3/descrintro/.
This patch upgrades the Python code in src/mapi/glapi/gen to use
exclusively new-style classes.
Tested-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Now that ARB programs and fixed function are routed through the new
backend, shader might be NULL. Don't do INTEL_DEBUG=perf support in
that case, since it relies on shader->compiled_once.
Since INTEL_DEBUG=perf wasn't previously supported, this maintains the
status quo. It might be nice to support it someday, however.
This could be moved to brw_shader_program instead of brw_shader, but
it appears even prog can be NULL in that case.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
MaxIfDepth of 0 means "flatten all the time", not "never flatten".
This is only desirable on hardware that can't support control flow;
software rasterization and most hardware drivers want this.
This alters behavior for swrast as well as i915. Tested on i915.
NOTE: This is a candidate for stable release branches.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
The previous patch removed the producer of things in this file.
Since there aren't any, we can remove it.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
All flags are now gone, so we can stop storing and passing this around.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Nobody ever set the flag, which makes this dead code.
v2: Leave the ureg_DECL_fs_input_cyl function in place, even though it's
unused, since VMWare uses it for their internal projects.
Reviewed-by: Eric Anholt <eric@anholt.net>
GLSL doesn't use the program code anymore. Accordingly, there were no
consumers of these flags, so there's no need to define them.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
These were only part of NV_fragment_program, so we can kill them.
The fact that PROGRAM_NAMED_PARAM appears in r200_vertprog.c is rather
comedic, but also demonstrates that people just spam the various types
of parameters everywhere because they're confusing.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Without NV programs, there's no need for the compatible_program_targets
function. A simple (non-)equality check will do.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Also remove a leftover remnant from NV_vertex_program.
v2: Update for Imre's get changes.
Reviewed-by: Brian Paul <brianp@vmware.com> [v1]
Reviewed-by: Eric Anholt <eric@anholt.net> [v1]
Previously, Mesa used nvprogram.c's _mesa_GetVertexAttribPointervNV()
function to implement this GL call. There was also a second
implementation in varray.c, _mesa_GetVertexAttribPointervARB(), which
was entirely unused.
The varray.c variant has an additional assertion and checks the index
against ctx->Const.VertexProgram.MaxAttribs rather than
MAX_VERTEX_GENERIC_ATTRIBS. However, that variable is defined to the
same value, so it should be fine.
This will allow us to kill the duplicate function.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Also kill the resulting dead code for display list handling.
v2: Also kill dlist's OPCODE_REQUEST_RESIDENT_PROGRAMS_NV.
Reviewed-by: Brian Paul <brianp@vmware.com> [v1]
Reviewed-by: Eric Anholt <eric@anholt.net>
The NamedParameter functions were introduced in NV_fragment_program, and
are not shared with any other extensions.
Although this patch appears to remove the LocalParameter functions, it
does not: the ARB_fragment_program section also set them up. Now we
simply initialize them a single time.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
No hardware drivers support this, it's obsolete, and unlikely to be
useful without NV_vertex_program, which is gone now.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
dri2DrawableGetMSC(), dri2WaitForMSC() and dri2WaitForSBC() were
inadvertently changed to return 0 on success. This resulted in the callers
returning an error to the client.
Restore the previous behavior and also check that the reply pointers are
valid before accessing them.
Reviewed-by: Eric Anholt <eric@anholt.net>
Note that _mesa_GetVertexAttribPointervNV() is actually
glGetVertexAttribPointerv(), which operates on the generic attributes. The
geometry shader initialization looks like arbitrary cruft to me.
Reviewed-by: Brian Paul <brianp@vmware.com>
Note that the MAP2 getters were missing from the implementation. Neat.
v2: Rebase on top of get.c changes.
Reviewed-by: Brian Paul <brianp@vmware.com> (v1)
It wasn't supported in hardware, and the comments in the code indicated no
known uses (similar to my experience on Intel) and a possible intent to remove
it.
Reviewed-by: Brian Paul <brianp@vmware.com>
We were holding on to this code because we were aware that NWN 1 had some
support for vertex programs -- no other linux programs I've come across would
use it (since other software also has ARB_vp or GLSL support). Only, it turns
out that NWN doesn't even give us any vertex programs. Given that we have
known issues where the extension has never been fully supported, just give up
on it.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=46795
Reviewed-by: Brian Paul <brianp@vmware.com>
- stopped using util_color
- reformatted to occupy less characters per line.
- used memcpy for the border color
- used pipe_color_union in the state structure
And the clear color too, though that may be an issue only with GL_RGB if it's
actually RGBA in the driver.
NOTE: This is a candidate for the stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
v2: The types of st_translate_color parameters were changed to gl_color_union
and pipe_color_union as per Brian's comment.
configure.ac would previously refuse to complete if libX11 wasn't
installed, even if we'd disabled GLX and weren't building an X11 EGL
platform. Make the check simply set the no_x variable that's used (but
never set) immediately below for what looks like this very case.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
commit a010215463 removed ES2 specific dispatch
table and remap_helper, since now we are using dispatch.h which is generated
from gl_and_es_API.xml we need to generate a matching remap_helper using the
same xml.
Note: This is a candidate for the 9.0 branch.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
lp_build_rsqrt initially did not do any newton-raphson step. This meant that
precision was only ~11 bits, but this handled both input 0.0 and +infinity
correctly. It did not however handle input 1.0 accurately, and denormals
always generated infinity result.
Doing a newton-raphson step increased precision significantly (but notably
input 1.0 still doesn't give output 1.0), however this fails for inputs
0.0 and infinity (both result in NaNs).
Try to fix this up by using cmp/select but since this is all quite fishy
(and still doesn't handle denormals) disable for now. Note that even with
workarounds it should still have been faster since the fallback uses sqrt/div
(which both use the usually unpipelined and slow divider hw).
Also add some more test values to lp_test_arit and test lp_build_rcp() too while
there.
v2: based on José's feedback, avoid hacky infinity definition which doesn't
work with msvc (unfortunately using INFINITY won't cut it neither on non-c99
compilers) in lp_build_rsqrt, and while here fix up the input infinity case
too (it's disabled anyway). Only test infinity input case if we have c99,
and use float cast for calculating reference rsqrt value so we really get
what we expect.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
"get_transfer + transfer_map" becomes "transfer_map".
"transfer_unmap + transfer_destroy" becomes "transfer_unmap".
transfer_map must create and return the transfer object and transfer_unmap
must destroy it.
transfer_map is successful if the returned buffer pointer is not NULL.
If transfer_map fails, the pointer to the transfer object remains unchanged
(i.e. doesn't have to be NULL).
Acked-by: Brian Paul <brianp@vmware.com>
Only the first 'nr_cbufs' color buffers in the pipe_framebuffer_state are
valid. The rest of the color buffer pointers might be unitialized.
Fixes a regression in the piglit fbo-srgb-blit test since changes in the
gallium blitter code.
NOTE: This is a candidate for the 9.0 branch (just to be safe).
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
This should improve our ability to register allocate without spilling.
Unfortuantely, due to the live variable analysis being ignorant of loops, we
still have register allocation failures on some programs.
v2: Add more context to the comment explaining the function.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v1)
Before, we'd spill one reg, then continue on without actually register
allocating, then assertion fail when we tried to use a vgrf number as a
register number.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
To validate this code, I ran piglit -t vs quick.tests with the "go spill
everything" debugging code enabled. There was only one regression:
glsl-vs-unroll-explosion simply ran out of registers. This should be
fine in the real world, since no one actually spills every single
register.
NOTE: This is a candidate for the 9.0 branch. Even if it proves to have
bugs, it's likely better than simply failing to compile.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
move_grf_array_access_to_scratch() calculates scratch buffer offsets in
bytes. However, emit_scratch_read/write() expects the base_offset
parameter to be measured in OWords.
As a result, a shader using a scratch read/write offset greater than
zero (in practice, a shader containing more than one variable in
scratch) would use too large an offset, frequently exceeding the
available scratch space.
This patch corrects the mismatch by removing spurious conversion from
OWords to bytes in move_grf_array_access_to_scratch().
This is based on a patch by Paul Berry.
NOTE: This is a candidate for stable release branches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Version 12 of the EGL_KHR_create_context spec changed this behavior.
NOTE: This is a candidate for the 9.0 branch
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
This brings us into accordance with the official Python style guide
(http://www.python.org/dev/peps/pep-0008/#indentation).
To preserve the indentation of the c code that is generated by these
scripts, I've avoided re-indenting triple-quoted strings (unless those
strings appear to be docstrings).
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Should fix MSVC build, as windows.h also defines CONST.
CONST usage in get.c is not new, so probably this just appeared now due
to changes in the includes.
This got broken by:
7182a1f glapi: rename/move GL_POLYGON_OFFSET_BIAS to its extension
section
Fix it by appending the _EXT suffix to the enum in the test too.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Oliver McFadden <oliver.mcfadden@linux.intel.com>
This will be needed by the next patch, which will switch to using
the parameter descriptor- and hash tables generated by the script.
The hash algorithm remains the same, the output parameter descriptor
table format changes slightly. There the TYPE_API_MASK entries are
removed and an invalid NULL entry is inserted at the beginning. This is
ok, as get.c:find_value() doesn't rely on TYPE_API_MASK any more to
detect an invalid enum.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Oliver McFadden <oliver.mcfadden@linux.intel.com>
The following enums used to be extensions but later became part of the
core specification. The _EXT/_ARB versions of these are not present in
in the current XML spec files, only defined in GL/glext.h
Later we'll need to look up these in a python script using the XML spec.
As a preparation for that remove the _EXT,_ARB suffix from these enums
and rename GL_DISTANCE_ATTENUATION_EXT to GL_POINT_DISTANCE_ATTENUATION.
Naturally, all enums keep their numerical values.
Note that similar renames shouldn't be necessary in the future: in case
of a new extension the XML spec is updated with the new _EXT/_ARB etc.
name and this name is added to the enum table in get.c. Later the
extension may become part of the core spec, at which point the name w/o
the _EXT/_ARB suffix is added to the XML spec and the table in get.c
remains the same.
GL_BLEND_DST_ALPHA_EXT
GL_BLEND_DST_RGB_EXT
GL_BLEND_SRC_ALPHA_EXT
GL_BLEND_SRC_RGB_EXT
GL_COLOR_SUM_EXT
GL_COMPRESSED_TEXTURE_FORMATS_ARB
GL_CURRENT_FOG_COORDINATE_EXT
GL_CURRENT_SECONDARY_COLOR_EXT
GL_DISTANCE_ATTENUATION_EXT
GL_FOG_COORDINATE_ARRAY_EXT
GL_FOG_COORDINATE_ARRAY_STRIDE_EXT
GL_FOG_COORDINATE_ARRAY_TYPE_EXT
GL_FOG_COORDINATE_SOURCE_EXT
GL_FRAGMENT_SHADER_DERIVATIVE_HINT_ARB
GL_PACK_IMAGE_HEIGHT_EXT
GL_PACK_SKIP_IMAGES_EXT
GL_SECONDARY_COLOR_ARRAY_EXT
GL_SECONDARY_COLOR_ARRAY_SIZE_EXT
GL_SECONDARY_COLOR_ARRAY_STRIDE_EXT
GL_SECONDARY_COLOR_ARRAY_TYPE_EXT
GL_UNPACK_IMAGE_HEIGHT_EXT
GL_UNPACK_SKIP_IMAGES_EXT
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Oliver McFadden <oliver.mcfadden@linux.intel.com>
When traversing the hash table looking up an enum that is invalid we
eventually reach the first element in the descriptor array. By looking
at the type of that element, which is always TYPE_API_MASK, we know that
we can stop the search and return error. Since this element is always
the first it's enough to check for its index being 0 without looking at
its type.
Later in this patchset, when we generate the hash tables during build
time, this will allow us to remove the TYPE_API_MASK and related flags
completly.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Oliver McFadden <oliver.mcfadden@linux.intel.com>
The glGet hash was initialized only once for a single GL API, even if
the application later created a context for a different API. This
resulted in glGet failing for otherwise valid parameters in a context
if that parameter was invalid in another context created earlier.
Fix this by using a separate hash table for each API.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Oliver McFadden <oliver.mcfadden@linux.intel.com>
This should be named GL_POLYGON_OFFSET_BIAS_EXT and listed under the
EXT_polygon_offset section. (Solution by Ian Romanick)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Oliver McFadden <oliver.mcfadden@linux.intel.com>
POLY_OFFSET_DB_FMT_CNTL is moved to the framebuffer state, because it only
depends on the zbuffer format.
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
This is not so trivial, because we disable blending if the dual src
blending is turned on and the number of color outputs is less than 2.
I decided to create 2 command buffers in the blend state object and just
switch between them when needed, because there are other states unrelated
to blending (like the color mask) and those shouldn't be changed
(the old code had it wrong).
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
r600_command_buffer is not an atom.
The "atoms" have evolved into state slots (or groups of state slots) where
you can bind states. There is a fixed amount of atoms (state slots)
in the context.
The command buffers are nothing like that. They represent states, not state
slots.
We could probably give r600_atom a better name someday.
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
The invalidate event support is a careful dance between driver and loader,
where both have to say they can handle it, and then the loader reports
invalidate events for the driver so the driver can do the optimization.
The EGL code doesn't report __DRIuseInvalidateExtension to the driver, so it
has no responsibility to call the driver's invalidate function, and the driver
is doing the glViewport hack because it assume. This is not
the only time invalidate would need to be called (we need it *any* time an
invalidate event comes down the pipe, but we don't watch for them), so just
stop calling the driver's function.
Acked-by: Chad Versace <chad.versace@linux.intel.com>
This behavior mostly matches glx_dri2. It's slightly complicated in
comparison because EGL exposes the implementation limits in the EGL config.
Note that platform_x11 was the only one setting swap_available, so the move of
the MaxSwapInterval into it is appropriate.
Acked-by: Chad Versace <chad.versace@linux.intel.com>
It's been in place but never enabled since 2010. Note how one piece called a
DRI2 function, suggesting never being tested.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
dri_interface.h comes from our tree, so why litter our tree with ifdefs for
older versions of it?
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
dri_interface.h comes from our tree, so why litter our tree with ifdefs for
older versions of it?
I left in the DRI_TEX_BUFFER_VERSION ifdefs, which is broken and uncompiled
(the version wasn't bumped from 2 to 3 when the patch was landed), but I don't
know what should be done with it.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
I'm going to transition a bunch of the protocol to using XCB so we can stop
rolling it ourselves.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
The EGLNative* types are all defined to be pointers across all our EGL
implementations, but in the X11 platform they're actually just XIDs (32-bit
integers).
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Commit 006c1a3c65 introduced a call to
clock_gettime, but failed to include <time.h>, breaking the build in
some cases.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Ever since df4a88ac, the check for compressed formats has been
unnecessary. And ever since cb72ec5f, the build has been broken with
FEATURE_ES. Remove it, as it does nothing.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Marek Olšák <maraeo@gmail.com>
Use a simple chaining hash table for the ACP. This is not really very good,
because we still do a full walk of the tree per destination write, but it
still reduces fp-long-alu runtime from 5.3 to 3.9s.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This means that we don't get constant prop across into the first block after a
BRW_OPCODE_IF or a BRW_OPCODE_DO, but we have hope for properly doing it
across control flow at some point. More importantly, with the next commit it
will help avoid O(n^2) with instruction count runtime for shaders that have
many constant moves.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This makes a giant pile of code newly dead. It also fixes TXB on newer
chipsets, which has been totally broken (I now have a piglit test for that).
It passes the same set of Ian's ARB_fragment_program tests. It also improves
high-settings ETQW performance by 3.2 +/- 1.9% (n=3), thanks to better
optimization and having 8-wide along with 16-wide shaders.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=24355
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
I don't know of any programs that would need more than this. The larger
programs I've seen have neared 100 instructions. This prevent excessive
runtimes of automatic tests that attempt to test up to the exposed maximums
(like fp-long-alu).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
ARB_fp doesn't go through the GLSL optimizer, and these were things you see
frequently thanks to conditionals being lowered to SLT/SGE and MUL.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This will be reused from the ARB_fp compiler. I touched up the pre-gen6 path
to not overwrite dst in the first instruction, which prevents the need for
aliasing checks (we'll need that in the ARB_fp compiler, but it actually
hasn't been needed in this codebase since the revert of the nasty old
MOV-avoidance code). I also made the conditional_mod between gen6 and
pre-gen6 consistent, which shouldn't matter except for denorm/(+/-)0
comparisons where the choice between left and right hand side of the
comparison changes.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We'll want to reuse this for ARB_fp handling.
v2: Fold the remaining bit of emit_texcoord back into visit(ir_texture).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Applications may destroy HDC at any time. So always get a HDC as needed.
Fixes lack of presents with Solidworks eDrawings when screen resolution is
changed.
Reviewed-by: Brian Paul <brianp@vmware.com>
'#extension foo: enable' is harmless. The functionality is only
actually enabled if the extension is supported. The shader won't use
the functionality if it's not supported, so we're fine.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
The diff looks weird, but this moves the code from the first 'if
(ctx->Const.GLSLVersion < 130)' block down into the second block. It
also moves some variable decalarations closer to their use.
NOTE: This is a candidate for the 9.0 branch.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
When an occlusion query was active, the derived DB state wasn't changed
for u_blitter even though all the occlusion queries were suspended.
It's fixed by moving the state update into the emit functions, which are
called whenever queries are stopped or suspended.
pipe_resource can be shared between contexts, we shouldn't modify its
description. Instead, let's use the resource "views" (sampler views and
surfaces), where we can freely change almost any property of a resource.
The idea here is to not flag _NEW_VARYING_VP_INPUTS when shaders (either
GLSL or ARB vp/fp) are in use. If either TNL or TexEnv programs are
active, at least one stage is using fixed function.
On Pineview, fixes 20 Piglit, 60 oglconforms, and 7 ES 1.1 conformance
tests, as well as missing textures in Xonotic. These were all
regressions since commit fb4a34e60e.
NOTE: This is a candidate for the 9.0 branch.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=49127
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54807
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
When using u_blitter, the state was being saved from saved_*, but we
don't use that. So after u_blitter resumed we got some corrupted
state in.
So let's just remove the saved_* stuff. I thought it was weird but
harmless, it's actually broken.
This function is only present in GLES1 and in the OpenGL compatibility
profile.
Fixes the following "make check" failure:
[----------] 1 test from DispatchSanity_test
[ RUN ] DispatchSanity_test.GLES2
Mesa warning: couldn't open libtxc_dxtn.so, software DXTn
compression/decompression unavailable
dispatch_sanity.cpp:122: Failure
Value of: table[i]
Actual: 0x4de54e
Expected: (_glapi_proc) _mesa_generic_nop
Which is: 0x41af72
i = 321
[ FAILED ] DispatchSanity_test.GLES2 (4 ms)
[----------] 1 test from DispatchSanity_test (4 ms total)
NOTE: This is a candidate for stable release branches.
Reviewed-by: Oliver McFadden <oliver.mcfadden@linux.intel.com>
Tested-by: Oliver McFadden <oliver.mcfadden@linux.intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Since we started doing fixups for different render target formats,
this has been an issue. Instead just don't do anything, when the
program gets emitted later it'll get the correct fixup.
Fixes a bunch of piglit tests.
This simply avoids some failed assertions but there's no reason to
call the driver hooks for storing a tex image if its size is zero.
Note: This is a candidate for the stable branches.
413c49141 added an optimisation to improve the performance of teximage
under a limited set of circumstances. If GL_EXT_unpack_subimage has been
used then we we must also skip this optimisation since the optimised
codepath does not take the packing values into consideration.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
I think libtool should be handling this for us, but the build fails for
Jordan because libdricommon (a static library, which uses expat) appears
before -lexpat on the linker command.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Jordan Justen <jordan.l.justen@intel.com>
Previously, we considered all registers as candidates for spilling.
This was counterproductive--for any registers that have already been
removed from the interference graph, there is no benefit to spilling
them, since they don't contribute to register pressure.
This patch ensures that we will only try to spill registers that are
still in the interference graph after register allocation has failed.
This is consistent with the recommendations of the paper "Retargetable
Graph-Coloring Register Allocation for Irregular Architectures", on
which our register allocator is based.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Wine or a windows app changes fpucw to 0x7f, causing doubles to be equivalent
to floats, which broke the calculation of FPS.
We should be very careful about using doubles in Mesa.
Henri Verbeet adds:
For reference, this is done by for example d3d9 when a D3D device is
created without D3DCREATE_FPU_PRESERVE set. In the general case
applications can do all kinds of terrible things to the FPU control
word of course.
[ RUN ] EnumStrings.LookUpByNumber
enum_strings.cpp:43: Failure
Value of: _mesa_lookup_enum_by_nr(everything[i].value)
Actual: "GL_COMPRESSED_RGBA_S3TC_DXT3_ANGLE"
Expected: everything[i].name
Which is: "GL_COMPRESSED_RGBA_S3TC_DXT3_EXT"
enum_strings.cpp:43: Failure
Value of: _mesa_lookup_enum_by_nr(everything[i].value)
Actual: "GL_COMPRESSED_RGBA_S3TC_DXT5_ANGLE"
Expected: everything[i].name
Which is: "GL_COMPRESSED_RGBA_S3TC_DXT5_EXT"
[ FAILED ] EnumStrings.LookUpByNumber (2 ms)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55505
Signed-off-by: Oliver McFadden <oliver.mcfadden@linux.intel.com>
The EGL_NOK_swap_region2 spec states that the rectangles are specified
with a bottom-left origin within a surface coordinate space also with a
bottom left origin, so this patch ensures the rectangles are flipped
before passing them on to dri2_copy_region.
Fixes piglit's egl-nok-swap-region test.
Tested-by: Matt Turner <mattst88@gmail.com>
A compressed texture image size doesn't have to be a multiple of the
compressed block size (only sub-images do). Fixes issues when building
compressed mipmaps because we often wind up with non-block-size images
for the higher mipmap levels.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=55445
Note: This is a candidate for the stable branches.
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Sven Arvidsson <sa@whiz.se>
We were previously using the TGSI input index, which can exceed the number of
parameters passed from the vertex shader via the parameter cache. Now we use
a separate index which only counts those parameters.
Prevents piglit regressions with the following fix.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Port the 'glcpp: fix abuse of yylex' commit to Android.mk
Also, since the Android.*.mk are sourced in a global namespace,
the local-y-to-c-and-h is prefixed with the LOCAL_MODULE name,
The initial fix commit is 53d46bc787
There's also a bugzilla for this: 54947
Signed-off-by: Negreanu Marius Adrian <adrian.m.negreanu@intel.com>
Reviewed-by: Oliver McFadden <oliver.mcfadden@linux.intel.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Commit 8d9778589f added all-targets to the
LLVM_COMPONENTS list, but this component does not exist with LLVM 2.8.
Adding all-targets is not necessary for any drivers, and it seems to be
left over from earlier versions of the commit mentioned above.
Tested-by: Stéphane Marchesin <marcheu@chromium.org>
The items are ordered in the item list by their offsets, with the lowest
offset coming first in the list. The old code was assuming that new
items being added to the list would always have a greater offset than
the first item in the list, however this is not always the case.
This can be used to initialize the CB* registers for buffers without a
radeon_surface.
v2:
- Get correct group_bytes value from r600_screen
- Stop setting unnecessary fields
Reviewed-by: Marek Olšák <maraeo@gmail.com>
This also fixes a lot tests, especially all the clip-and-scissor-blit MSAA
piglit tests.
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
The original blit function is extended and the otAher functions reuse it.
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Fixes this build error on Cygwin.
Explicit dependency `src/glsl/builtins/tools/texture_builtins.py' not
found, needed by target
`build/cygwin-x86-debug/glsl/builtin_function.cpp'.
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Often, the original shader IR isn't terribly interesting because a lot
of crucial optimizations haven't been done (such as inlining built-ins).
ir_to_mesa used to print this out for us, but since we don't use it, we
have to do it ourselves.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
The anonymous namespace should keep these private classes to file scope,
preventing clashes with other symbols of the same name elsewhere.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
From SandyBridge PRM, volume 2 Part 1, section 12.2.3, BLEND_STATE:
DWord 1, Bit 30 (AlphaToOne Enable):
"If Dual Source Blending is enabled, this bit must be disabled"
Note: This is a candidate for stable branches.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Change the format to MAJOR.MINOR[FC]
For example: 2.1, 3.0FC, 3.1
The FC suffix indicates a forward compatible context, and
is only valid for versions >= 3.0.
Examples:
2.1: GL Legacy/Compatibility context
3.0: GL Legacy/Compatibility context
3.0FC: GL Core Profile context + Forward Compatible
3.1: GL Core Profile context
3.1FC: GL Core Profile context + Forward Compatible
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
intelDestroyContext will eventually be called, and it will clean things
up. The call to brwInitVtbl is moved earlier so that
intelDestroyContext can call the device-specific destructor. This also
makes the code look more like the i915 code.
NOTE: This is a candidate for the 9.0 branch.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54301
_glapi_table is a struct full of named function pointers, while the generated
code just wants to treat it as an array of function pointers. Cast to avoid
the compiler warning.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This test is only built when shared-glapi is used. Because of changes
elsewhere in the tree that were necessary to make shared-glapi work
correct with GLX, it's not feasible to make the test function both ways.
The list of expected functions originally came from the functions set by
api_exec_es2.c. This file no longer exists in Mesa (but api_exec_es1.c
is still generated). It was the generated file that configured the
dispatch table for ES2 contexts. This test verifies that all of the
functions set by the old api_exec_es2.c (with the recent addition of VAO
functions) are set in the dispatch table and everything else is a NOP.
When adding ES2 (or ES3) extensions that add new functions, this test
will need to be modified to expect dispatch functions for the new
extension functions.
v2: Expect VAO functions be non-NOP.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
When building with shared-glapi, we can just use Mesa's _mesa_warning without
problems. stubs.cpp is only used when shared-glapi is not used.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
v2: Allow GL_ARB_shader_objects functions in core profile because we
still expose the extension string there. Don't allow
glBindFragDataLocation in GLES3 because it's not part of that API.
Based (mostly) on review comments from Eric Anholt.
NOTE: This is a candidate for the 9.0 branch
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This isn't used by this patch, but it will be necessary for several
follow-on patches. Separating this out will make it easier to reorder
patches later.
NOTE: This is a candidate for the 9.0 branch
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This function is not the same as glGetProgramiv.
NOTE: This is a candidate for the 9.0 branch
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
The most recent commit that touched this function,
commit b1d0fe022d
Author: Chad Versace <chad.versace@linux.intel.com>
Date: Wed Sep 26 11:05:12 2012 -0700
intel: Fix segfault in intel_texsubimage_tiled_memcpy
did fix the segfault, but introduced yet another bug. From Anholt: """You
need to still test format/type, because that's the incoming format (e.g.
GL_RGBA/GL_FLOAT) that you're trying to memcpy."""
This patch re-introduces the checks on the incoming format and type.
Note: This is a candidate for the 9.0 branch.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
In commit 091eb15b69, Jordan changed get_temp_image_type() to use
_mesa_get_format_datatype() instead of returning GL_FLOAT. That has
several possible return values: GL_FLOAT, GL_INT, GL_UNSIGNED_INT,
GL_SIGNED_NORMALIZED, and GL_UNSIGNED_NORMALIZED.
We do want to use GL_INT/GL_UNSIGNED_INT for integer formats. However,
we want to continue using GL_FLOAT for the normalized fixed-point types.
There isn't any code in pack.c to handle GL_(UN)SIGNED_NORMALIZED.
Fixes oglconform's fboarb advanced.blit.copypix, which was regressed by
commit 091eb15b69.
NOTE: This is a candidate for the 9.0 branch.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=53573
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
This patch removes all gl_config's with swapMethod=GLX_SWAP_COPY_OML. When
page flipping, we are unable to comply with swap-copy semantics.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
This failed when all the uploads to occur were uniform-type vertex data (like
glColor4f being active across a DrawArrays), because it would upload 1 element
instead of 1 element per vertex. There was no citation for how this code
helped any particular application, and it breaks ETQW, so just remove it.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47170
NOTE: This is a candidate for the 9.0 and 8.0 branches.
Reviewed-and-tested-by: Kenneth Graunke <kenneth@whitecape.org>
The only symbols that need to be public (those in intel_screen.c that the
loader looks for) are already marked public. Saves 100k of compiled driver
size.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The function segfaulted when a game called glTexSubImage2D on a texture
with internalformat/format/type = GL_SLUMINANCE8/GL_BGRA/GL_UNSIGNED_BYTE.
The function only supports MESA_FORMAT_ARGB8888 and returns early if it
detects an unsupported format. Clearly, its detection condition was
insufficient. This patch fixes it to explicity check for
MESA_FORMAT_ARGB8888.
Note: This is a candidate for the 9.0 branch (fixes 413c491).
Reviewed-and-tested-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Paul Berry <stereotype441@gmail.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Haswell supports EXT_texture_swizzle and legacy DEPTH_TEXTURE_MODE
swizzling by setting SURFACE_STATE entries. This means we don't have to
bake the swizzle settings into the shader code by emitting MOV
instructions, and thus don't have to recompile shaders whenever the
swizzles change.
Unfortunately, we can't handle GL_ALPHA this way: unlike all the others,
which store the comparison result in the .r channel (and possibly others
as well), GL_ALPHA puts it in the .a channel. The GLSL 1.30+ style
functions which return a float always simply return the .r channel,
which would be zero if we handled this as a surface override. In this
case, fall back to doing it the old way. DEPTH_TEXTURE_MODE = GL_ALPHA
isn't an interesting performance path anyway.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Fixes valgrind errors in piglit test
oes_compressed_etc1_rgb8_texture-miptree: an invalid write in
_mesa_store_compressed_store_texsubimage() at line 4406 and invalid reads
in texcompress_etc_tmp.h:etc1_parse_block().
The calculation of the size of the temporary etc1 buffer allocated by
intel_miptree_map_etc1() was incorrect. Sometimes the allocated buffer was
too small, sometimes too large. This patch corrects the size to that
expected by _mesa_store_compressed_store_texsubimage().
Note: This is candidate for the 9.0 branch.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Do all error checking of glTexSubImage, glCopyTexSubImage and
glCompressedTexSubImage's xoffset, yoffset, zoffset, width, height, and
depth params in one place.
If a subtexture region isn't aligned to the compressed block size,
return GL_INVALID_OPERATION, not gl_INVALID_VALUE.
NOTE: This is a candidate for the stable branches.
Reviewed-by: Eric Anholt <eric@anholt.net>
Instead of tracking the inferred state changes separately
just check if queued and emitted states are the same.
This patch just reworks the update of the SPI map between
vs and ps, but there are probably more cases like this.
Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
GLES 3 supports sRGB functionality, but it does not expose the
GL_FRAMEBUFFER_SRGB enable/disable bit. Instead the implementation
is expected to behave as though that bit is always enabled.
This patch ensures that ctx->Color.sRGBEnabled (the internal variable
tracking GL_FRAMEBUFFER_SRGB) is initially true in GLES 2/3 contexts,
and that it cannot be modified through the GLES 3 API.
This is safe for GLES 2, since ctx->Color.sRGBEnabled has no effect on
non-sRGB formats, and GLES 2 doesn't support any sRGB formats.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Previously, meta logic was saving and restoring the value of
GL_FRAMEBUFFER_SRGB in an ad-hoc fashion. As a result, it was not
properly disabled and/or restored for some meta operations.
This patch causes GL_FRAMEBUFFER_SRGB to be saved/restored in the
conventional way of meta-ops (using _mesa_meta_begin() and
_mesa_meta_end()). It is now reliably saved/restored for
_mesa_meta_BlitFramebuffer, _mesa_meta_GenerateMipmap, and
decompress_texture_image, and preserved for all other meta ops.
Fixes piglit tests "ARB_framebuffer_sRGB/blit renderbuffer
{linear_to_srgb,srgb} scaled {disabled,enabled}".
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
GLES3 supports sRGB formats, but it does not support the
GL_FRAMEBUFFER_SRGB enable/disable flag (instead it behaves as if this
flag is always enabled). Therefore, meta ops that need to disable
GL_FRAMEBUFFER_SRGB will need a backdoor mechanism to do so when the
API is GLES3.
We were already doing a similar thing for GL_MULTISAMPLE, which has
the same constraints.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This patch reduces the time spent in glTexImage and glTexSubImage by
over 5x on Sandybridge for the workload described below.
It adds a new fast path for glTexImage2D and glTexSubImage2D,
intel_texsubimage_tiled_memcpy, which is optimized for Google Chrome's
paint rectangles. The fast path is implemented only for 2D GL_BGRA
textures for chipsets with a LLC.
=== Performance Analysis ===
Workload description:
Personalize your google.com page with a wallpaper. Start chromium
with flags "--ignore-gpu-blacklist --enable-accelerated-painting
--force-compositing-mode". Start recording with chrome://tracing. Visit
google.com and wait for page to finish rendering. Measure the time spent
by process CrGpuMain in GLES2DecoderImpl::HandleTexImage2D and
HandleTexSubImage2D.
System config:
cpu: Sandybridge Mobile GT2+ (0x0126)
kernel 3.4.9 x86_64
chromium 21.0.1180.89 (154005)
Statistics:
| N Median Avg Stddev
--------------|-------------------------
before (msec) | 8 472.5 463.75 72.6
after (msec) | 8 78.0 79.6 5.7
Arithmetic difference at 95.0% confidence:
-384.1 +/- 55.2 msec
-82.8% +/- 11.9%
Ratio at 95.0% confidence:
5.81 +/- 0.119
v2:
- Replace check for `intel->gen >= 6` with `intel->has_llc`, per
danvet.
- Fix typo in comment, s/throuh/through/.
- Swap 'before' and 'after' rows in stat table.
v3:
- If the current batch references the bo, then flush batch before mapping
the bo. Found by Chris.
- Restrict supported texture images to level 0 of target
GL_TEXTURE_2D. This avoids an arithmetic bug in calculating image
offsets within the miptree, found by Paul. This restriction does not
diminish this patch's benefit to Chrome OS performance.
- Use less instructions for bit6 swizzling, suggested by Paul.
- Remove erroneous comment about Y-tiling, for Paul.
- Print perf_debug messages when flushing and stalling.
- Update stats in commit message; run workload under a release build
rather than a debug build.
Note: This is a candidate for the 9.0 branch.
Acked-by: Eric Anholt <eric@anholt.net>
CC: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
A game we're working with leaves scissoring enabled, but frequently sets
the scissor rectangle to the size of the whole screen. In that case,
scissoring has no effect, so it's safe to go ahead with a fast clear.
Chad believe this should help with Oliver McFadden's "Dante" as well.
v2/Chad: Use the drawbuffer dimensions rather than the miptree slice
dimensions. The miptree slice may be slightly larger due to alignment
restrictions.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-and-tested-by: Oliver McFadden <oliver.mcfadden@linux.intel.com>
Fixes an assertion failure when compiling certain shaders that need both
pull constants and register spilling:
brw_eu_emit.c:204: validate_reg: Assertion `execsize >= width' failed.
NOTE: This is a candidate for release branches.
Signed-off-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Commit e2249e8c4d (i965/blorp: Add
support for blits between SRGB and linear formats) changed blorp to
always configure surface states for in linear format (even if the
underlying surface is sRGB). This allowed sRGB-to-linear and
linear-to-sRGB blits to occur without causing the image to be
inappropriately brightened or darkened.
However, it broke sRGB MSAA resolves, since they rely on the
destination buffer format being sRGB in order to ensure that samples
are averaged together in sRGB-correct fashion.
This patch fixes the problem by instead configuring the source buffer
to use the *same* format as the destination buffer. This ensures that
the image won't be brightened or darkened, but preserves proper sRGB
averaging.
Fixes piglit tests "EXT_framebuffer_multisample/accuracy srgb".
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55265
NOTE: This is a candidate for stable release branches.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-and-tested-by: Kenneth Graunke <kenneth@whitecape.org>
There are a few automake files that reference $(X11_INCLUDES) such as
src/glx/Makefile.am but configure.ac wasn't declaring the variable for
substitution. This would break builds of glx if libxcb, for example, was
installed in its own prefix since AM_CFLAGS wouldn't coincidentally
list the needed include path in that case.
Reviewed-by: Matt Turner <mattst88@gmail.com>
This patch is a band-aid fix for a bug in commit 5fd67fa (i965/blorp:
Reduce alignment restrictions for stencil blits), which causes
multisampled stencil blits to work incorrectly on Sandy Bridge.
When blitting to or from a normal stencil buffer, we have to use a
coordinate transformation that swizzles coordinates to account for the
fact that stencil buffers use W tiling, but the most similar tiling
format available for textures and render targets is Y tiling. The
differences between W and Y tiling cause pixels to be scrambled within
a block of size 8x4 (width x height) as measured relative to a W tile,
or 16x2 as measured relative to a Y tile. So in order to make sure
that pixels at the edges of the blit aren't lost, we need to align the
rendering rectangle (and the buffer sizes) to multiples of the 8x4
block size. This alignment happens in the brw_blorp_blit_params
constructor, whereas the determination of how to swizzle the
coordinates happens during code generation, in the
brw_blorp_blit_program class.
When blitting to or from a multisampled stencil buffer, the coordinate
swizzling is more complex, because it has to account for the
interleaving pattern of samples, which uses 4x4 blocks for 4x MSAA and
8x4 blocks for 8x MSAA. The end result is that if multisampling is in
use, the 16x2 block size (relative so a Y tile) needs to be expanded
to 16x4, and the corresponding size relative to a W tile expands to
8x8.
The problem doesn't affect Ivy Bridge severely enough to crop up in
Piglit tests because on Ivy Bridge we have to disable multisampling
when blitting *to* a multisampled stencil buffer (the blorp compiler
generates code to compensate for the fact that multisampling is
disabled). However I suspect a bug is still present because we don't
disable multisampling when blitting *from* a multisampled stencil
buffer.
This patch fixes the problem by doubling the vertical alignment
requirement when blitting to or from a multisampled stencil buffer,
and multisampling has not been disabled.
In the long run I would like to rework the brw_blorp_blit_params
constructor--it's difficult to follow and has had several subtle bugs
like this one. However this band-aid fix should be suitable for
cherry-picking to release branches.
Fixes Piglit tests "unaligned-blit {2,4} stencil {msaa,upsample}" on
Sandy Bridge.
NOTE: This is a candidate for stable release branches.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Recent version of GCC report a warning for the implicit conversion from
int to float:
ff_fragment_shader.cpp:897:3: warning: narrowing conversion of '(1 << ((int)rgb_shift))' from 'int' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing]
This is because floats cannot precisely represent all possible 32-bit
integer values. However, texenv code is all expected to be floating
point, so this should not be a problem.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
From the OpenGL Registry:
"2012/08/13: specs named GL_ARB_debug_group, GL_ARB_debug_label, and
GL_ARB_debug_output2 were published in error during the initial OpenGL 4.3
release. All functionality in these documents was combined into
the extension GL_KHR_debug. They have been withdrawn from the registry,
and a few other extensions were renumbered to avoid holes in the numbering
scheme."
pipe_draw_info::indexed determines if it should be indexed and not
the presence of an index buffer.
This fixes crashes in r300g.
NOTE: This is a candidate for the stable branches.
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
A call to glGenerateMipmap() follows the generation of a relevant
shader program in setup_glsl_generate_mipmap().
To support all texture targets and to avoid compiling shaders
everytime, per target shader programs are compiled on demand
and saved for the next call.
Fixes float-texture(mipmap.manual):
See Comment 6: https://bugs.freedesktop.org/show_bug.cgi?id=54296
NOTE: This is a candidate for stable branches.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Blorp has to convert rectangle coordinates from integers to floats in
order to send them down the GPU pipeline. Recent versions of GCC
issue a warning for this, since a float is not capable of precisely
representing all possible 32-bit integer values. Suppress the warning
with an explicit type cast in the case of blorp, since rectangle
coordinates will never be large enough to cause a loss of precision.
Reviewed-by: Eric Anholt <eric@anholt.net>
Given that it exists between a push/pop of instruction state, this call
can only affect the MOV or ADD instruction generated just below it.
Neither of those instructions are predicated, so it makes no sense to
ask for the inverse predicate.
This fixes grumblings from the simulator debugger, which was
complaining about an invalid predicate.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Commit 42723d88d intended to override an S3TC internalFormat to a
generic compressed format when the application requested online
compression of uncompressed data. Unfortunately, it also broke
pre-compressed textures when libtxc_dxtn isn't installed but the
extensions are forced on.
Both glCompressedTexImage2D() and glTexImage2D() call teximage(), which
calls _mesa_choose_texture_format(), hitting this override code. If we
have actual S3TC source data, we can't treat it as any other format, and
need to avoid the override.
Since glCompressedTexImage2D() passes in a format of GL_NONE (which is
illegal for glTexImage), we can use that to detect the pre-compressed
case and avoid the overrides.
Fixes a regression since 42723d88d3.
NOTE: This is a candidate for the 9.0 branch.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-and-tested-by: Jordan Justen <jordan.l.justen@intel.com>
Fixes colorspace issues in L4D2 when multisampling is enabled (the
scene was far too dark, but the flashlight area was way too bright).
The nVidia and AMD binary drivers both allow this kind of blit.
NOTE: This is a candidate for the 9.0 branch.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
MSAA resolves and other blit-like operations ignore SRGB state anyway,
so we should be able to safely allow resolves between compatible
SRGB/linear formats like SRGBA8 and RGBA8888.
This matches the behavior of the nVidia and AMD binary drivers.
Fixes completely black rendering when using multisampling in L4D2.
NOTE: This is a candidate for the 9.0 branch.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
v2: use uint64_t for the total_size variable, per Jose.
Also add two earlier checks for exceeding the max texture size.
For example a 1K^3 RGBA volume would overflow the lpr->image_stride
variable.
Use simple algebra to avoid overflow in intermediate values.
So instead of "x * y > z" use "x > z / y".
This should work if we happen to be on a platform that doesn't have
64-bit types.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
This was already (correctly) supported for glGetSamplerParameter paths.
NOTE: This is a candidate for stable branches.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Initializing the regalloc state is expensive, and since it is always
the same for every compile we only need to initialize it once per
context. This should help improve shader compile times for the driver.
Compute shaders fetch data from vertex buffers via the texture cache, so
we need to make sure the texture cache is flushed.
v2:
- Fix rebase mistake
- Fix spelling in comment
Reviewed-by: Marek Olšák <maraeo@gmail.com>
LOOP_START_DX10 ignores the LOOP_CONFIG* registers, so it is not limited
to 4096 iterations like the other LOOP_* instructions. Compute shaders
need to use this instruction, and since we aren't optimizing loops with
the LOOP_CONFIG* registers for pixel and vertex shaders, it seems like
we should just use it for everything.
Reviewed-by: Marek Olšák <maraeo@gmail.com>
For buffers (which is what is being used for RATs), the
COLOR*_DIM.WIDTH_MASK field needs to be set to the low 16-bits of the
buffer size, and the COLOR*_DIM.HEIEGHT_MAX needs to be set to the
high bits.
Reviewed-by: Marek Olšák <maraeo@gmail.com>
- add OpenCL state tracker Clover
- add XvMC state tracker
- remove progs
directory got moved into its own repository mesa/demos
- remove vf
directory removed with abda64efce
Don't cache pointers to elements of reallocatable array.
In some circumstances it caused false cache hits resulting in incorrect
command stream and gpu lockup.
Note: This is a candidate for the stable branches.
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
If the gallium driver implements the can_create_resource() function, call
it to do proxy texture size checks.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Used to implement proxy textures. If a gallium driver doesn't implement
this function we'll just continue to use the core Mesa fallback code.
Without this hook we really have no good way to implement OpenGL proxy
textures with gallium drivers.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Before, the limit was 8K. For 32-bit RGBA that would be require 1.5 GB
of memory (w/out mipmaps). That's well beyond the LP_MAX_TEXTURE_SIZE
of 1GB.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Simplify the code and make it more like the other glTexImage commands.
Call _mesa_legal_texture_dimensions() to validate width, height, depth.
Call ctx->Driver.TestProxyTexImage() to make sure texture is not too large.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
There are two aspects to texture image size checking:
1. Are the width, height, depth legal values (not negative, not larger
than the max size for the mipmap level, etc)?
2. Is the texture just too large to handle? For example, we might not be
able to really allocate memory for a 3D texture of maxSize x maxSize x
maxSize.
Previously, we did (1) via the ctx->Driver.TestProxyTextureImage() hook
but those tests are really device-independent. Now we do (2) via that
hook since the max texture memory and texture shape are device-dependent.
Also, (1) is now done outside the general texture parameter error checking
functions because of the special interaction with proxy textures. The
recently introduced PROXY_ERROR token is removed.
The teximage() and copyteximage() functions are bit simpler now (less
if-then nesting, etc.)
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Basically, move the body into a new _mesa_legal_texture_dimensions() function.
More refactoring to come.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
I can't see any reason this is global (unless for debugging)
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds basic flow control support for If-Then-Else blocks using
predicates (stored in the EXEC register) and a predicate stack for
nested flow control.
No regressions found in the tests of opencl-example/run_tests.sh.
Signed-off-by: Xinya Zhang <zxy_thf@hotmail.com>
Signed-off-by: Tom Stellard <thomas.stellard@amd.com>
As far as I can see, the intention of the requirement that we do so is to
prevent instruction prefetch from wandering out into either unmapped memory or
memory with a different caching type, and hanging the chip. The kernel makes
sure that the page after your BO has a valid page of the same caching type,
which meets this requirement, so there's no need to waste space between our
programs (and in instruction cache) on this.
Saves another 9kb instructions in l4d2 shaders.
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reduces l4d2 program size from 1195kb to 919kb. Improves performance by 0.22%
+/- 0.11% (n=70).
v2: Rebase on compaction v2, fix up flag reg handling (by anholt).
v3: Fix uncompaction of the flag register number.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
This reduces program size by using some smaller encodings for common bit
patterns in the Gen ISA, with the hope of making programs fit in the
instruction cache better.
v2: Use larger bitshifts for the uncompressed field setups, in line with the
way it's described in the spec. Consistently name a brw_compile "p" like
all other code. Add a couple more tests. Consistently call things
"compacted" not "compressed" (which is a different feature). Drop the
explicit check for not compacting SENDs, which is unjustified and already
implied by our lack of support for immediate values.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
The first cut at instruction compaction won't compact things that
would change control flow jump distances, but we do need to still be
able to walk the instruction stream, which involves jumping by 8 or 16
bytes between instructions.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
It's going to get more complicated when we do instruction compaction. This
also introduces putting the program offset in the output.
v2: Use next_insn_offset in brw_get_program(), too.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
To do unit testing of i965, we want to be able to link against the
driver's symbols and prod them. If we don't have a separate lib from
our loadable module, libtool gets super whiny.
Acked-by: Paul Berry <stereotype441@gmail.com>
This file is used to provide stubs for the link test in gallium dri drivers.
But the same stubs without the main can be used for making unit tests for code
in a dri driver.
Acked-by: Paul Berry <stereotype441@gmail.com>
I noticed in valgrind that p->single_program_flow was used while
uninitialized. Everything else zeroed out brw_compile, but this is better
API.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
This fixes glGetStringi(GL_EXTENSIONS,.. for core contexts. Previously,
all extension names returned would be NULL.
NOTE: This is a candidate for release branches.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
GL_TEXTURE_1D, GL_TEXTURE_3D, GL_TEXTURE_RECTANGLE, and
GL_TEXTURE_GEN_S/T/R/Q don't exist in ES 1 contexts, so any meta ops
that used _mesa_meta_begin with MESA_META_TEXTURE would trigger GL
errors. One such operation is _mesa_meta_Clear().
On ES 1, we want to disable GL_TEXTURE_GEN_STR_OES instead.
Fixes the ES1 conformance test miplin.c, which was regressed by commit
08be1d288f.
NOTE: This is a candidate for the 9.0 branch.
v2: Also blacklist GL_TEXTURE_3D, per Brian's comment.
v3: Disable GL_TEXTURE_GEN_STR_OES, per Ian's comment.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54297
Reviewed-by: Brian Paul <brianp@vmware.com> [v1]
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Just to make it consistent with the rest of vbo, since it would
be an exported symbol anyways.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
I can't see any external users, and this is a global symbol,
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The current code is duplicated in two places and relies on `uname` to
detect the flags. This is no good for cross-compiling, and the current
logic uses -m64 for the x32 ABI which breaks things.
Unify the code in one place, avoid `uname` completely, and add support
for the new x32 ABI.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This symbol with dricore escapes into the namespace, its too generic,
we should prefix it with something just to be nice.
Should be applied to stable + 9.0
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
So glcpp tried to workaround yylex its own way, but failed,
do it properly.
This fixes another crash found after fixing the first crash.
this is a candidate for 9.0 and stable branches
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This avoids us making a global yylex symbol which will interfere will
all sorts of apps.
with libdricore which can't do symbol visibility currently we pollute
the namespace with this.
This is a candidate for 9.0 & stable branches.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In commit 055093e (meta: remove call to _meta_in_progress(), fix
multisample enable/disable), we created a meta_set_enable() function
that could be used by meta ops to enable and disable GL_MULTISAMPLE
even when the GLES API was in use (the GLES API doesn't support
GL_MULTISAMPLE; it behaves as if it is always enabled). This created
some unfortunate code duplication between meta_set_enable() and the
existing _mesa_set_enable() function.
This patch eliminates the duplication by creating a
_mesa_set_multisample() function, which is used by both meta ops and
_mesa_set_enable() to enable/disable GL_MULTISAMPLE.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
glsl version of _mesa_meta_GenerateMipmap() would require separate
shaders for glsl 120 and 130.
V2: Removed the code for integer textures as ARB is planning to
disallow automatic mipmap generation for integer textures.
NOTE: This is a candidate for stable branches.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
glsl path of _mesa_meta_GenerateMipmap() function would require different fragment
shaders depending on the texture target. This patch adds the code to generate
appropriate fragment shader programs at run time.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=54296
V2: Removed the code for integer textures as ARB is planning to
disallow automatic mipmap generation for integer textures.
Now using ralloc_asprintf in setup_glsl_generate_mipmap().
NOTE: This is a candidate for stable branches.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
v2: Group vgt register together to avoid lockup
v3: Split multi primitive register and index bias register
v4: Bump R600_NUM_ATOMS
Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Update only those sampler states which are changed in a shader stage,
instead of always updating all sampler states in the shader stage.
That requires keeping a bitmask of those states which are enabled, and those
states which are dirty at a given point (subset of enabled states).
This is similar to how sampler views, constant buffers, and vertex buffers
are handled.
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Based on the patch called "simplify and fix flushing and synchronization"
by Jerome Glisse.
Rebased, removed unneded code, simplified more and cleaned up.
Also, SH_ACTION_ENA is not set when changing shaders (hw doesn't seem
to need it). It's only used to flush constant buffers.
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Some of the old AMDIL code was hard-coding subreg indices when creating
the VBUILD node, which was making it difficult to match the
vector_insert patterns.
ARB fragment programs use texture unit numbers directly, unlike GLSL
which has an extra indirection. If a fragment program only uses one
texture assigned to GL_TEXTURE1, SamplersUsed will only contain a single
bit, which would make us only upload a single surface/sampler state
entry. However, it needs to be the second entry.
Using _mesa_fls() instead of _mesa_bitcount() solves this. For ARB
programs, this makes num_samplers the ID of the highest texture unit
used. Since GLSL uses consecutive integers assigned by the linker,
_mesa_fls() should give the same result as _mesa_bitcount()..
Fixes a regression since 85e8e9e000,
which caused GPU hangs in ETQW (and probably others), as well as
breaking piglit test fp-fragment-position.
v2: Add a comment, as suggested by Matt.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54098
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54179
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: meng <mengmeng.meng@intel.com>
ffs() finds the least significant bit set; _mesa_fls() finds the /most/
significant bit.
v2: Make it an inline function in imports.h, per Brian's suggestion.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Fixes piglit test "framebuffer-blit-levels draw stencil".
NOTE: This is a candidate for stable release branches.
Acked-by: Eric Anholt <eric@anholt.net>
Previously, we aligned all stencil blit operations to multiples of the
size of a tile, since stencil buffers use W-tiling, and blorp has to
approximate this by configuring the 3D pipeline for Y-tiling and
swizzling coordinates.
However, this was unnecessarily conservative; it turns out that the
differences between W-tiling and Y-tiling are confined to 32-byte
sub-tiles within the 4k tiling pattern; the layout of these 32-byte
sub-tiles within the larger 4k tile is the same (8 sub-tiles across by
16 sub-tiles down, in column-major order). Therefore we only need to
align stencil blit operations to multiples of the sub-tile size.
Note: although the performance improvement of this change is probably
quite small, the fact that W-tiling and Y-tiling formats only differ
within 32-byte sub-tiles will be essential in a future patch to ensure
that stencil blits work correctly between parts of the miptree other
than level/layer 0. Making this change provides handy documentation
(and validation) of this fact.
NOTE: This is a candidate for stable release branches.
Acked-by: Eric Anholt <eric@anholt.net>
When blitting to a stencil buffer, we need to align the rectangle we
send down the rendering pipeline, to account for the fact that the
stencil buffer uses a W-tiled layout, but we are configuring its
surface state as Y-tiled.
Previously, when the stencil buffer was multisampled, we assumed that
we could reduce the amount of alignment that was necessary, since each
pixel occupies a block of 2x2 or 4x2 samples in the stencil buffer.
That would have been correct if the coordinates we were adjusting were
measured in pixels. However, the conversion from pixel coordinates to
coordinates within the interleaved buffer has already been done;
therefore the full alignment restriction applies.
Note: the reason this mistake wasn't previously uncovered by piglit
tests is because it is being masked by another mistake: the blorp
engine is using overly conservative alignment restrictions when doing
stencil blits. The overly conservative alignment restrictions will be
removed in the patch that follows. Doing this fix now will prevent
the subsequent patch from introducing regressions.
NOTE: This is a candidate for stable release branches.
Acked-by: Eric Anholt <eric@anholt.net>
This patch modifies intel_region_get_aligned_offset() to make the
appropriate calculation when the blorp engine sets up a W-tiled
stencil buffer using a Y-tiled SURFACE_STATE.
NOTE: This is a candidate for stable release branches.
Acked-by: Eric Anholt <eric@anholt.net>
When the blorp engine is performing a blit from one stencil buffer to
another, it sets up the surface state for these buffers as Y-tiled, so
it needs to be able to force intel_region_get_tile_masks() to return
the appropriate masks for a Y-tiled region.
NOTE: This is a candidate for stable release branches.
Acked-by: Eric Anholt <eric@anholt.net>
Fixes piglit tests "framebuffer-blit-levels {read,draw} depth".
NOTE: This is a candidate for stable release branches.
Reviewed-by: Eric Anholt <eric@anholt.net>
Previously, when performing a blit using the blorp engine, we failed
to account for the level and layer of the source and destination. As
a result, all blits would occur between miplevel 0 and layer 0 of the
corresponding textures, regardless of which level/layer was bound to
the framebuffer.
This patch passes the correct level and layer through
brw_blorp_miptrees() into the brw_blorp_blit_params data structure.
Further patches in the series will adapt
gen{6,7}_blorp_emit_surface_state to make use of these parameters.
NOTE: This is a candidate for stable release branches.
Reviewed-by: Eric Anholt <eric@anholt.net>
Currently, gen{6,7}_blorp_emit_surface_state assumes that the src and
dst surfaces are mapped to miplevel 0 and layer 0 (thus no surface
offset is required). This is a bug, since the user might try to blit
to and from levels/layers other than 0.
To fix this bug, it will not be sufficient to have
gen6_{6,7}_blorp_emit_surface_state look up the surface offset at the
time they set up the surface state, since these offsets will need to
be tweaked when blitting stencil buffers (due to the fact that stencil
buffer blits have to swizzle between W and Y tiling formats).
So, to pave the way for the bug fix, this patch causes the x and y
offsets to be computed during blit setup and stored in
brw_blorp_mip_info.
As a result of this change, brw_blorp_mip_info doesn't need to store
the level and layer anymore.
For consistency, this patch makes a similar change to the handling of
depth buffers when doing HiZ operations.
NOTE: This is a candidate for stable release branches.
Reviewed-by: Eric Anholt <eric@anholt.net>
Previously, gen{6,7}_blorp_emit_surface_state would look up the width
and height of the surface at the time they set up the surface state,
and then tweak it if necessary (it's necessary when a W-tiled surface
is being mapped as Y-tiled). With this patch, we look up the width
and height when setting up the blit, and store them in
brw_blorp_mip_info. This allows us to do the necessary tweak in the
brw_blorp_blit_params constructor (where it makes more sense). It
also reduces the need to keep track of level and layer in
brw_blorp_mip_info, so that a future patch can eliminate them
entirely.
For consistency, this patch makes a similar change to the handling of
depth buffers when doing HiZ operations.
NOTE: This is a candidate for stable release branches.
Reviewed-by: Eric Anholt <eric@anholt.net>
This makes it more convenient for blorp functions to get access to
Intel-specific data inside the renderbuffer objects.
NOTE: This is a candidate for stable release branches.
Reviewed-by: Eric Anholt <eric@anholt.net>
Also add a clarifying comment for why the width/height doesn't need
adjustment for Gen7.
NOTE: This is a candidate for stable release branches.
Reviewed-by: Eric Anholt <eric@anholt.net>
Since Gen6+ stencil buffers use W-tiling (a tiling arrangement which
drm and the kernel are not aware of) we need to round up the width and
height of a stencil buffer to multiples of the W-tile size (64x64)
before allocating a stencil buffer. Previously, we rounded up the
size of the base miplevel, and then computed the miptree layout based
on the rounded up size. This was incorrect, because it meant that the
total size of the miptree would not be properly W-tile aligned, and
therefore we would not always allocate enough pages.
(Note: even though the GL API doesn't allow creation of mipmapped
stencil textures, it does allow mipmapping of a combined depth/stencil
texture, and on Gen6+, a combined depth/stencil texture is internally
implemented as a pair of separate depth and stencil buffers.)
For example, on Sandy Bridge, when allocating a mipmapped stencil
texture of size 128x128, we would first round up to the nearest
multiple of 64x64 (causing no change to the size), and then compute
the miptree layout (whose size worked out to 128x196). Then we would
request an allocation of 128*196 bytes (6.125 pages), causing 7 pages
to be allocated to the texture. However, the texture needs 8 pages,
since each W-tile occupies a page, and it takes 2 W-tiles to cover a
width of 128 and 4 W-tiles to cover a height of 196.
This patch changes the order of operations so that the miptree layout
is computed first and then the total size of the miptree is rounded up
to be W-tile aligned.
NOTE: This is a candidate for stable release branches.
Reviewed-by: Eric Anholt <eric@anholt.net>
Fixes piglit shaders/glsl-fs-uniform-sampler-array and many other similar
tests.
In fact, I just completed a piglit quick-driver.tests run without any GPU
lockups or even VM protection faults. Yay!
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
The value was too small by 1 in some cases (non-first of several vertex
elements interleaved in a single buffer).
Fixes intermittent incorrect geometry in many apps, e.g. piglit
spec/EXT_texture_snorm/fbo-generatemipmap-formats.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
These enums are valid only in ES1 and ES2. So far they were marked valid
incorrectly, depending on the previous API mask in the enum list.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Brian Paul <brianp@vmware.com>
This is basically a follow-on to 1f5b1f9846.
Basically, generate GL errors for ordinary invalid parameters for proxy
targets the same as for non-proxy targets. Only texture size and OOM
errors should be handled specially for proxies.
Note: This is a candidate for the stable branches.
Turns out we weren't doing any format checking before. Now check
the internal format and, in particular, make sure that unsized internal
formats aren't accepted.
Note: This is a candidate for the stable branches.
From the GL 4.3 spec, section 18.3.1 "Blitting Pixel Rectangles":
If SAMPLE_BUFFERS for either the read framebuffer or draw
framebuffer is greater than zero, no copy is performed and an
INVALID_OPERATION error is generated if the dimensions of the
source and destination rectangles provided to BlitFramebuffer are
not identical, or if the formats of the read and draw framebuffers
are not identical.
It is not clear from the spec whether "dimensions" should mean both
sign and magnitude, or just magnitude.
Previously, Mesa interpreted "dimensions" as meaning both sign and
magnitude, so any multisampled blit that attempted to flip the image
in the X and/or Y direction would fail.
However, Y flips are likely to be commonplace in OpenGL applications
that have been ported from DirectX applications, as a result of the
fact that DirectX and OpenGL differ in their orientation of the Y
axis. Furthermore, at least one commercial driver (nVidia) permits Y
filps, and L4D2 relies on them being permitted. So it seems prudent
for Mesa to permit them.
This patch changes Mesa to allow both X and Y flips, since there is no
language in the spec to indicate that X and Y flips should be treated
differently.
NOTE: This is a candidate for stable release branches.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
The compiler needs to know which interpolation modes are enabled, so
it knows which values will be preloaded into the VGPRs.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
At least one interpolation mode must be enable, but the code that checks
this was not checking for perspective center.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Previous command stream might have set any of the constant buffer
and the previous address might no longer be valid thus GPU might
preload constant from random invalid address and possibly triggering
lockup.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
* Handle arbitrary border colours.
* Use correct packing format for detecting special border colours.
Fixes piglit tex-border-1 and probably many other tests using border colours.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
According to the GLSL 4.30 specification, this is a compile time error.
Earlier specifications don't specify a behavior, but since 0 and 1 are
the only valid indices for dual source blending, it makes sense to
generate the error.
Fixes (the fixed version of) piglit's layout-12.frag.
NOTE: This is a candidate for the 9.0 branch.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Fixes piglit spec/EXT_texture_snorm/fbo-generatemipmap-formats (except for
what seems like a random fluke).
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Saves 96MB of wasted memory in the l4d2 demo.
v2: Rebase on compare func change, change brace style.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Saves 26.5MB of wasted memory allocation in the l4d2 demo.
v2: Rebase on compare func change, fix comments.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> (v1)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Currently, this just avoids comparing all unused parts of param[] and
pull_param[], but it's a step toward getting rid of those giant statically
sized arrays.
v2: Actually use the new function instead of just looking at its
address. This required changing the args to const pointers.
(review by Kenneth)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We don't fully process the builtin uniforms, but at least
num_uniform_components reflects reality now.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This fixes an issue where the local 'table' variable was hiding the
function parameter name in glGetColorTable(..., void *table).
This should be OK as long as there's never a GL entrypoint that uses
'disp_table' as a parameter name.
Note: This is a candidate for the 9.0 branch.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Haswell moved the "Cut Index Enable" bit from the INDEX_BUFFER packet to
a new 3DSTATE_VF packet, so we need to emit that. Also, it requires us
to specify the cut index rather than assuming it's 0xffffffff.
This adds a new Haswell-specific tracked state atom to gen7_atoms.
Normally, we would create a new generation-specific atom list, but since
there's only one difference over Ivybridge so far, I chose to simply
make it return without doing any work on non-Haswell systems.
Fixes five piglit tests:
- general/primitive-restart-DISABLE_VBO
- general/primitive-restart-VBO_COMBINED_VERTEX_AND_INDEX
- general/primitive-restart-VBO_INDEX_ONLY
- general/primitive-restart-VBO_SEPARATE_VERTEX_AND_INDEX
- general/primitive-restart-VBO_VERTEX_ONLY
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
To avoid GPU lockup registers must be emited in a specific order
(no kidding ...). This patch rework atom emission so order in which
atom are emited in respect to each other is always the same. We
don't have any informations on what is the correct order so order
will need to be infered from fglrx command stream.
v2: add comment warning that atom order should not be taken lightly
v3: rebase on top of alphatest atom fix
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
glGetStringi(GL_EXTENSIONS) failed to respect the context's API, and so
returned all internally enabled GLES extensions from a GL context.
Likewise, glGetIntegerv(GL_NUM_EXTENSIONS) also failed to repsect the
context's API.
Note: This is a candidate for the 8.0 and 9.0 branches.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Such as
"llvmpipe (LLVM 3.1, 128 bits)"
or
"llvmpipe (LLVM 3.1, 256 bits)"
when leveraging AVX 8-wide registers.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Should be at least mostly working now (with the corresponding fixes in
libdrm_radeon).
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
We can always use the offset and tiling mode from level 0 and restrict the
first and last mipmap level to be used in the sampler resource.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Same as earlier commit, except for "FREE"
This patch has been generated by the following Coccinelle semantic
patch:
// Remove useless checks for NULL before freeing
//
// free (NULL) is a no-op, so there is no need to avoid it
@@
expression E;
@@
+ FREE (E);
+ E = NULL;
- if (unlikely (E != NULL)) {
- FREE(E);
(
- E = NULL;
|
- E = 0;
)
...
- }
@@
expression E;
type T;
@@
+ FREE ((T) E);
+ E = NULL;
- if (unlikely (E != NULL)) {
- FREE((T) E);
(
- E = NULL;
|
- E = 0;
)
...
- }
@@
expression E;
@@
+ FREE (E);
- if (unlikely (E != NULL)) {
- FREE (E);
- }
@@
expression E;
type T;
@@
+ FREE ((T) E);
- if (unlikely (E != NULL)) {
- FREE ((T) E);
- }
Reviewed-by: Brian Paul <brianp@vmware.com>
This patch has been generated by the following Coccinelle semantic
patch:
@@
expression E;
identifier I;
@@
- I = malloc(E);
+ I = calloc(1, E);
...
- memset(I, 0, sizeof *I);
Reviewed-by: Brian Paul <brianp@vmware.com>
This patch has been generated by the following Coccinelle semantic
patch:
// Remove useless checks for NULL before freeing
//
// free (NULL) is a no-op, so there is no need to avoid it
@@
expression E;
@@
+ free (E);
+ E = NULL;
- if (unlikely (E != NULL)) {
- free(E);
(
- E = NULL;
|
- E = 0;
)
...
- }
@@
expression E;
type T;
@@
+ free ((T) E);
+ E = NULL;
- if (unlikely (E != NULL)) {
- free((T) E);
(
- E = NULL;
|
- E = 0;
)
...
- }
@@
expression E;
@@
+ free (E);
- if (unlikely (E != NULL)) {
- free (E);
- }
@@
expression E;
type T;
@@
+ free ((T) E);
- if (unlikely (E != NULL)) {
- free ((T) E);
- }
Reviewed-by: Brian Paul <brianp@vmware.com>
This patch has been generated by the following Coccinelle semantic
patch:
// Don't cast the return value of malloc/realloc.
//
// Casting the return value of malloc/realloc only stands to hide
// errors.
@@
type T;
expression E1, E2;
@@
- (T)
(
_mesa_align_calloc(E1, E2)
|
_mesa_align_malloc(E1, E2)
|
calloc(E1, E2)
|
malloc(E1)
|
realloc(E1, E2)
)
These calls allowed Xlib to use a custom memory allocator, but Xlib has
used the standard C library functions since at least its initial import
into git in 2003. It seems unlikely that it will grow a custom memory
allocator. The functions now just add extra overhead. Replacing them
will make future Coccinelle patches simpler.
This patch has been generated by the following Coccinelle semantic
patch:
// Remove Xcalloc/Xmalloc/Xfree calls
@@ expression E1, E2; @@
- Xcalloc (E1, E2)
+ calloc (E1, E2)
@@ expression E; @@
- Xmalloc (E)
+ malloc (E)
@@ expression E; @@
- Xfree (E)
+ free (E)
@@ expression E; @@
- XFree (E)
+ free (E)
Reviewed-by: Brian Paul <brianp@vmware.com>
This is a long-standing omission in Mesa's texture image size checking.
We need to take the mipmap level into consideration when checking if the
width, height and depth are too large.
Fixes the new piglit max-texture-size-level test.
Thanks to Stéphane Marchesin for finding this problem.
Note: This is a candidate for the stable branches.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
According to Eric, this shouldn't matter since we don't do precompiles
using the old backend. In other words, brw->fragment_program (the
currently active program) should equal c->fp (the program currently
being compiled).
However, it's just not a good idea to access brw->fragment_program
directly in compiler code. It's totally illegal in the new backend, so
let's just not do it here either.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reported-by: Paul Berry <stereotype441@gmail.com>
The CodeEmitter was not setting the VGPR bit for src0, because the
instruction definition had the VCC register in the src0 slot, instead of
the actual src0 register. This has been fixed by moving the VCC
register to the end of the operand list.
Looks like converting this to a macro, returning bool, caused us to
lose the high (31st) bit result. Fixes piglit fbo-1d test. Strange
that none of the other tests I ran caught this.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=54365
Tested-by: Vinson Lee <vlee@freedesktop.org>
We were already defining sqrtf where we don't have the C99 version.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Use 1/256 for R6xx/7xx, 1/4096 for evergreen, instead of default 1/16.
Helps to pass some piglit tests (fbo, multisample).
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
I wonder if the better solution is to have _mesa_meta_GenerateMipmap not
use MESA_META_ALL for the GLSL path. Even on compatibility profiles
there is no reason to save and restore fog on this path.
NOTE: This is a candidate for the 9.0 branch.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Tested-by: Lu Hua <huax.lu@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54295
Looks like we have an alignment issue with NPOT textures
and mipmaps. So disable NPOT textures until we figure out
what is going wrong here.
Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reading brw->fragment_program is nonsensical in compiler code: it
contains the currently active program (if any), not the one currently
being compiled. Attempting to access it may either lead to crashes
(null pointer dereference if no program is active) or wrong results.
Fixes piglit regressions since 9ef710575b
on pre-Sandybridge hardware. The actual bug was created in commit
7b1fbc6889.
NOTE: This is a candidate for the 9.0 and 8.0 branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54183
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
From ARB_sync spec:
If the value of <timeout> is zero, then ClientWaitSync does not
block, but simply tests the current state of <sync>. TIMEOUT_EXPIRED
will be returned in this case if <sync> is not signaled, even though
no actual wait was performed.
Fixes random fails of the arb_sync-timeout-zero piglit test on r600g.
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
As discussed with Kristian on #wayland. Pushes the decision of components into
the dri driver giving it greater freedom to allow t to implement YUV samplers
in hardware, and which mode to use.
This interface will also allow drivers like SVGA to implement YUV surfaces
without the need to sub-allocate and instead send 3 seperate buffers for each
channel, currently not implemented.
I have tested these changes on Gallium Svga. Scott tested them on both intel
and Gallium Radeon. Kristan and Pekka tested them on intel.
v2: Fix typo in dri2_from_planar.
v3: Merge in intel changes.
Tested-by: Scott Moreau <oreaus@gmail.com>
Tested-by: Pekka Paalanen <ppaalanen@gmail.com>
Tested-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Immediate operands were previously handled in the CodeEmitter, but that
code was buggy and very confusing. This commit adds a pass that simplifies
the handling of immediate operands by spliting the loading of the
immediate into a sperate insruction that is bundled with the original.
The relevant POINT_SIZE registers are being set using the
pipe_rasterizer_state, so we just need to tell the shader compiler which
export type to use.
This fixes several of the glean glsl tests.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
On Android we want to add only double buffered configs for visuals.
Earlier implementation set the SurfaceType as 0 for single buffered
configs but driver still exposed these configs that were not compatible
with any egl surface type. This caused Khronos conformance test runs to
fail on Android. This patch fixes the issue by skipping single buffered
configs earlier and not exposing them.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
The CALLOC() macro only takes one argument so this was being treated
as a comma expression. Simply use calloc() instead.
A follow-on patch will replace all CALLOC() calls with calloc().
NOTE: This is a candidate for the 8.0 and 9.0 branches.
_mesa_delete_renderbuffer() should free the mutex (though that may be a
no-op) and then free the renderbuffer object itself. Subclasses of
gl_renderbuffer can use this function too.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
2012-08-31 08:04:40 -06:00
2185 changed files with 94383 additions and 162177 deletions
- a VRML parsing/display library with "lookat" - an example VRML browser
<li><ahref="http://plib.sourceforge.net/"target="_parent">PLIB</a> - A collection of portable games libraries, including an OpenGL GUI and a simple Scene Graph API
<li><ahref="ftp://ftp.troll.no/contest/Pryan-1.2.tar.gz"target="_parent">Pryan</a> - an OpenInventor-like toolkit
<li><ahref="http://starship.python.net:9673/crew/da/Code/PyOpenGL"target="_parent">PyOpenGL</a> - OpenGL interface for Python
<li><ahref="http://www.quesa.org/"target="_parent">Quesa</a> - QuickDraw3D-compatible library based on OpenGL, Mesa or Direct3D
<li><ahref="http://www.mesa3d.org/brianp/repgl.txt"target="_parent">repGL</a> - IRIS GL emulated with OpenGL
<li><ahref="http://www.scitechsoft.com/dp_mgl.html"target="_parent">SciTech MGL</a> - A multiplatform (Windows, Linux, OS/2, DOS, QNX, SMX, RT-Target & more) graphics library
<li><ahref="http://sgl.sourceforge.net/"target="_parent">SGL</a> - a 3D Scene Graph Library
<li><ahref="http://www.lal.in2p3.fr/SI/SoFree/"target="_parent">SoFree</a> - a free implementation of Open Inventor
<li><ahref="http://togl.sourceforge.net/"target="_parent">Togl</a> - Tcl/Tk widget for OpenGL
<li>st/mesa: Fix uninitialized members in glsl_to_tgsi_visitor constructor.</li>
</ul>
</div>
</body>
</html>
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
