minor tweaks

The previous procedure would often result in a GPU lockup.

.gitattributes

@@ -1,4 +0,0 @@
-*.dsp -crlf
-*.dsw -crlf
-*.sln -crlf
-*.vcproj -crlf

.gitignore

@@ -2,15 +2,8 @@
 *.o
 *.so
 *.sw[a-z]
-*.pc
 *~
 depend
 depend.bak
 lib
 lib64
-configure
-autom4te.cache
-aclocal.m4
-config.log
-config.status
-cscope*

Makefile

@@ -14,25 +14,25 @@ default: $(TOP)/configs/current
 
 
 doxygen:
-	cd doxygen && $(MAKE)
+	(cd doxygen ; make) ; \
 
 clean:
-	-@touch $(TOP)/configs/current
-	-@for dir in $(SUBDIRS) ; do \
+	@for dir in $(SUBDIRS) ; do \
 		if [ -d $$dir ] ; then \
 			(cd $$dir && $(MAKE) clean) ; \
 		fi \
 	done
-	-@test -s $(TOP)/configs/current || rm -f $(TOP)/configs/current
 
 
-realclean: clean
+realclean:
+	touch $(TOP)/configs/current
+	$(MAKE) clean
 	-rm -rf lib*
 	-rm -f $(TOP)/configs/current
-	-rm -f $(TOP)/configs/autoconf
-	-rm -rf autom4te.cache
-	-find . '(' -name '*.o' -o -name '*.a' -o -name '*.so' -o \
-	  -name depend -o -name depend.bak ')' -exec rm -f '{}' ';'
+	-rm -f `find . -name \*.o`
+	-rm -f `find . -name \*.a`
+	-rm -f `find . -name \*.so`
+	-rm -f `find . -name depend`
 
 
 
@@ -48,20 +48,14 @@ install:
 linux-directfb-install:
 	cd src/mesa/drivers/directfb && $(MAKE) install
 
-.PHONY: default doxygen clean realclean install linux-directfb-install
-
 # If there's no current configuration file
 $(TOP)/configs/current:
 	@echo
 	@echo
 	@echo "Please choose a configuration from the following list:"
-	@ls -1 $(TOP)/configs | grep -v "current\|default\|CVS\|autoconf.*"
+	@ls -1 $(TOP)/configs | grep -v "current\|default\|CVS"
 	@echo
 	@echo "Then type 'make <config>' (ex: 'make linux-x86')"
-	@echo
-	@echo "Or, run './configure' then 'make'"
-	@echo "See './configure --help' for details"
-	@echo
 	@echo "(ignore the following error message)"
 	@exit 1
 
@@ -72,16 +66,11 @@ aix-64 \
 aix-64-static \
 aix-gcc \
 aix-static \
-autoconf \
-bluegene-osmesa \
-bluegene-xlc-osmesa \
 beos \
-catamount-osmesa-pgi \
 darwin \
-darwin-fat-32bit \
-darwin-fat-all \
 darwin-static \
 darwin-static-x86ppc \
+darwin-x86ppc \
 freebsd \
 freebsd-dri \
 freebsd-dri-amd64 \
@@ -162,9 +151,8 @@ sunos5-v8 \
 sunos5-v8-static \
 sunos5-v9 \
 sunos5-v9-static \
-sunos5-v9-cc-g++ \
 ultrix-gcc:
-	@ if test -f configs/current || test -L configs/current ; then \
+	@ if [ -e configs/current ] ; then \
 		echo "Please run 'make realclean' before changing configs" ; \
 		exit 1 ; \
 	fi
@@ -174,25 +162,17 @@ ultrix-gcc:
 
 # Rules for making release tarballs
 
-DIRECTORY = Mesa-7.3-rc3
-LIB_NAME = MesaLib-7.3-rc3
-DEMO_NAME = MesaDemos-7.3-rc3
-GLUT_NAME = MesaGLUT-7.3-rc3
+DIRECTORY = Mesa-7.0.1-rc2
+LIB_NAME = MesaLib-7.0.1-rc2
+DEMO_NAME = MesaDemos-7.0.1-rc2
+GLUT_NAME = MesaGLUT-7.0.1-rc2
 
 MAIN_FILES = \
 	$(DIRECTORY)/Makefile*						\
-	$(DIRECTORY)/configure						\
-	$(DIRECTORY)/configure.ac					\
-	$(DIRECTORY)/acinclude.m4					\
-	$(DIRECTORY)/aclocal.m4						\
 	$(DIRECTORY)/descrip.mms					\
 	$(DIRECTORY)/mms-config.					\
-	$(DIRECTORY)/bin/config.guess					\
-	$(DIRECTORY)/bin/config.sub					\
-	$(DIRECTORY)/bin/install-sh					\
 	$(DIRECTORY)/bin/mklib						\
 	$(DIRECTORY)/bin/minstall					\
-	$(DIRECTORY)/bin/version.mk					\
 	$(DIRECTORY)/configs/[a-z]*					\
 	$(DIRECTORY)/docs/*.html					\
 	$(DIRECTORY)/docs/COPYING					\
@@ -200,7 +180,9 @@ MAIN_FILES = \
 	$(DIRECTORY)/docs/RELNOTES*					\
 	$(DIRECTORY)/docs/*.spec					\
 	$(DIRECTORY)/include/GL/internal/glcore.h			\
+	$(DIRECTORY)/include/GL/amesa.h					\
 	$(DIRECTORY)/include/GL/dmesa.h					\
+	$(DIRECTORY)/include/GL/fxmesa.h				\
 	$(DIRECTORY)/include/GL/ggimesa.h				\
 	$(DIRECTORY)/include/GL/gl.h					\
 	$(DIRECTORY)/include/GL/glext.h					\
@@ -215,52 +197,63 @@ MAIN_FILES = \
 	$(DIRECTORY)/include/GL/mglmesa.h				\
 	$(DIRECTORY)/include/GL/osmesa.h				\
 	$(DIRECTORY)/include/GL/svgamesa.h				\
+	$(DIRECTORY)/include/GL/ugl*.h					\
 	$(DIRECTORY)/include/GL/vms_x_fix.h				\
 	$(DIRECTORY)/include/GL/wmesa.h					\
+	$(DIRECTORY)/include/GL/xmesa.h					\
+	$(DIRECTORY)/include/GL/xmesa_x.h				\
+	$(DIRECTORY)/include/GL/xmesa_xf86.h				\
+	$(DIRECTORY)/include/GLView.h					\
 	$(DIRECTORY)/src/Makefile					\
 	$(DIRECTORY)/src/descrip.mms					\
 	$(DIRECTORY)/src/mesa/Makefile*					\
 	$(DIRECTORY)/src/mesa/sources					\
 	$(DIRECTORY)/src/mesa/descrip.mms				\
-	$(DIRECTORY)/src/mesa/gl.pc.in					\
-	$(DIRECTORY)/src/mesa/osmesa.pc.in				\
 	$(DIRECTORY)/src/mesa/depend					\
 	$(DIRECTORY)/src/mesa/main/*.[chS]				\
 	$(DIRECTORY)/src/mesa/main/descrip.mms				\
+	$(DIRECTORY)/src/mesa/main/sources				\
 	$(DIRECTORY)/src/mesa/glapi/*.[chS]				\
 	$(DIRECTORY)/src/mesa/glapi/descrip.mms				\
+	$(DIRECTORY)/src/mesa/glapi/sources				\
 	$(DIRECTORY)/src/mesa/math/*.[ch]				\
 	$(DIRECTORY)/src/mesa/math/descrip.mms				\
+	$(DIRECTORY)/src/mesa/math/sources				\
 	$(DIRECTORY)/src/mesa/shader/*.[ch]				\
 	$(DIRECTORY)/src/mesa/shader/descrip.mms			\
+	$(DIRECTORY)/src/mesa/shader/sources				\
 	$(DIRECTORY)/src/mesa/shader/grammar/*.[ch]			\
 	$(DIRECTORY)/src/mesa/shader/grammar/descrip.mms		\
+	$(DIRECTORY)/src/mesa/shader/grammar/sources			\
 	$(DIRECTORY)/src/mesa/shader/slang/*.[ch]			\
 	$(DIRECTORY)/src/mesa/shader/slang/descrip.mms			\
+	$(DIRECTORY)/src/mesa/shader/slang/sources			\
 	$(DIRECTORY)/src/mesa/shader/slang/library/*.[ch]		\
 	$(DIRECTORY)/src/mesa/shader/slang/library/*.gc			\
 	$(DIRECTORY)/src/mesa/shader/slang/library/*.syn		\
 	$(DIRECTORY)/src/mesa/shader/slang/library/Makefile		\
 	$(DIRECTORY)/src/mesa/swrast/*.[ch]				\
 	$(DIRECTORY)/src/mesa/swrast/descrip.mms			\
+	$(DIRECTORY)/src/mesa/swrast/sources				\
 	$(DIRECTORY)/src/mesa/swrast_setup/*.[ch]			\
 	$(DIRECTORY)/src/mesa/swrast_setup/descrip.mms			\
+	$(DIRECTORY)/src/mesa/swrast_setup/sources			\
 	$(DIRECTORY)/src/mesa/vbo/*.[chS]				\
 	$(DIRECTORY)/src/mesa/vbo/descrip.mms				\
 	$(DIRECTORY)/src/mesa/tnl/*.[chS]				\
 	$(DIRECTORY)/src/mesa/tnl/descrip.mms				\
+	$(DIRECTORY)/src/mesa/tnl/sources				\
 	$(DIRECTORY)/src/mesa/tnl_dd/*.[ch]				\
 	$(DIRECTORY)/src/mesa/tnl_dd/imm/*.[ch]				\
 	$(DIRECTORY)/src/mesa/tnl_dd/imm/NOTES.imm			\
-	$(DIRECTORY)/src/mesa/drivers/Makefile				\
 	$(DIRECTORY)/src/mesa/drivers/beos/*.cpp			\
 	$(DIRECTORY)/src/mesa/drivers/beos/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/common/*.[ch]			\
 	$(DIRECTORY)/src/mesa/drivers/common/descrip.mms		\
+	$(DIRECTORY)/src/mesa/drivers/common/sources			\
 	$(DIRECTORY)/src/mesa/drivers/directfb/*.[ch]			\
 	$(DIRECTORY)/src/mesa/drivers/directfb/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/dos/*.[chS]			\
-	$(DIRECTORY)/src/mesa/drivers/fbdev/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/fbdev/glfbdev.c			\
 	$(DIRECTORY)/src/mesa/drivers/glide/*.[ch]			\
 	$(DIRECTORY)/src/mesa/drivers/ggi/*.[ch]			\
@@ -270,7 +263,6 @@ MAIN_FILES = \
 	$(DIRECTORY)/src/mesa/drivers/ggi/display/*.c			\
 	$(DIRECTORY)/src/mesa/drivers/ggi/display/fbdev.conf.in		\
 	$(DIRECTORY)/src/mesa/drivers/ggi/include/ggi/mesa/*.h		\
-	$(DIRECTORY)/src/mesa/drivers/osmesa/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/osmesa/Makefile.win		\
 	$(DIRECTORY)/src/mesa/drivers/osmesa/descrip.mms		\
 	$(DIRECTORY)/src/mesa/drivers/osmesa/osmesa.def			\
@@ -278,11 +270,9 @@ MAIN_FILES = \
 	$(DIRECTORY)/src/mesa/drivers/svga/*.[ch]			\
 	$(DIRECTORY)/src/mesa/drivers/windows/*/*.[ch]			\
 	$(DIRECTORY)/src/mesa/drivers/windows/*/*.def			\
-	$(DIRECTORY)/src/mesa/drivers/x11/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/x11/descrip.mms			\
+	$(DIRECTORY)/src/mesa/drivers/x11/sources			\
 	$(DIRECTORY)/src/mesa/drivers/x11/*.[ch]			\
-	$(DIRECTORY)/src/mesa/drivers/glslcompiler/Makefile		\
-	$(DIRECTORY)/src/mesa/drivers/glslcompiler/glslcompiler.c	\
 	$(DIRECTORY)/src/mesa/ppc/*.[ch]				\
 	$(DIRECTORY)/src/mesa/sparc/*.[chS]				\
 	$(DIRECTORY)/src/mesa/x86/Makefile				\
@@ -298,19 +288,24 @@ MAIN_FILES = \
 	$(DIRECTORY)/vms/analyze_map.com				\
 	$(DIRECTORY)/vms/xlib.opt					\
 	$(DIRECTORY)/vms/xlib_share.opt					\
-	$(DIRECTORY)/windows/VC8/
+	$(DIRECTORY)/windows/VC8/mesa/mesa.sln				\
+	$(DIRECTORY)/windows/VC8/mesa/gdi/gdi.vcproj			\
+	$(DIRECTORY)/windows/VC8/mesa/glu/glu.vcproj			\
+	$(DIRECTORY)/windows/VC8/mesa/mesa/mesa.vcproj			\
+	$(DIRECTORY)/windows/VC8/mesa/osmesa/osmesa.vcproj		\
+	$(DIRECTORY)/windows/VC8/progs/progs.sln			\
+	$(DIRECTORY)/windows/VC8/progs/demos/gears.vcproj		\
+	$(DIRECTORY)/windows/VC8/progs/glut/glut.vcproj
 
 
 DRI_FILES = \
 	$(DIRECTORY)/include/GL/internal/dri_interface.h		\
-	$(DIRECTORY)/include/GL/internal/glcore.h			\
 	$(DIRECTORY)/include/GL/internal/sarea.h			\
 	$(DIRECTORY)/src/glx/Makefile					\
 	$(DIRECTORY)/src/glx/x11/Makefile				\
 	$(DIRECTORY)/src/glx/x11/*.[ch]					\
 	$(DIRECTORY)/src/mesa/drivers/dri/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/dri/Makefile.template		\
-	$(DIRECTORY)/src/mesa/drivers/dri/dri.pc.in			\
 	$(DIRECTORY)/src/mesa/drivers/dri/common/xmlpool/*.[ch]		\
 	$(DIRECTORY)/src/mesa/drivers/dri/common/xmlpool/*.po		\
 	$(DIRECTORY)/src/mesa/drivers/dri/*/*.[chS]			\
@@ -321,7 +316,6 @@ DRI_FILES = \
 SGI_GLU_FILES = \
 	$(DIRECTORY)/src/glu/Makefile					\
 	$(DIRECTORY)/src/glu/descrip.mms				\
-	$(DIRECTORY)/src/glu/glu.pc.in					\
 	$(DIRECTORY)/src/glu/sgi/Makefile				\
 	$(DIRECTORY)/src/glu/sgi/Makefile.mgw				\
 	$(DIRECTORY)/src/glu/sgi/Makefile.win				\
@@ -329,8 +323,6 @@ SGI_GLU_FILES = \
 	$(DIRECTORY)/src/glu/sgi/glu.def				\
 	$(DIRECTORY)/src/glu/sgi/dummy.cc				\
 	$(DIRECTORY)/src/glu/sgi/descrip.mms				\
-	$(DIRECTORY)/src/glu/sgi/glu.exports				\
-	$(DIRECTORY)/src/glu/sgi/glu.exports.darwin			\
 	$(DIRECTORY)/src/glu/sgi/mesaglu.opt				\
 	$(DIRECTORY)/src/glu/sgi/include/gluos.h			\
 	$(DIRECTORY)/src/glu/sgi/libnurbs/interface/*.h			\
@@ -357,7 +349,6 @@ GLW_FILES = \
 	$(DIRECTORY)/src/glw/*.[ch]			\
 	$(DIRECTORY)/src/glw/Makefile*			\
 	$(DIRECTORY)/src/glw/README			\
-	$(DIRECTORY)/src/glw/glw.pc.in			\
 	$(DIRECTORY)/src/glw/depend
 
 DEMO_FILES = \
@@ -386,8 +377,7 @@ DEMO_FILES = \
 	$(DIRECTORY)/progs/samples/*.c			\
 	$(DIRECTORY)/progs/glsl/Makefile*		\
 	$(DIRECTORY)/progs/glsl/*.c			\
-	$(DIRECTORY)/progs/glsl/*.frag			\
-	$(DIRECTORY)/progs/glsl/*.vert			\
+	$(DIRECTORY)/progs/glsl/*.txt			\
 	$(DIRECTORY)/progs/windml/Makefile.ugl		\
 	$(DIRECTORY)/progs/windml/*.c			\
 	$(DIRECTORY)/progs/windml/*.bmp			\
@@ -402,7 +392,6 @@ GLUT_FILES = \
 	$(DIRECTORY)/include/GL/glutf90.h		\
 	$(DIRECTORY)/src/glut/glx/Makefile*		\
 	$(DIRECTORY)/src/glut/glx/depend		\
-	$(DIRECTORY)/src/glut/glx/glut.pc.in		\
 	$(DIRECTORY)/src/glut/glx/*def			\
 	$(DIRECTORY)/src/glut/glx/descrip.mms		\
 	$(DIRECTORY)/src/glut/glx/mms_depend		\
@@ -418,10 +407,6 @@ GLUT_FILES = \
 	$(DIRECTORY)/src/glut/fbdev/Makefile		\
 	$(DIRECTORY)/src/glut/fbdev/*[ch]		\
 	$(DIRECTORY)/src/glut/mini/*[ch]		\
-	$(DIRECTORY)/src/glut/mini/glut.pc.in		\
-	$(DIRECTORY)/src/glut/directfb/Makefile		\
-	$(DIRECTORY)/src/glut/directfb/NOTES		\
-	$(DIRECTORY)/src/glut/directfb/*[ch]		\
 	$(DIRECTORY)/windows/VC6/progs/glut/glut.dsp	\
 	$(DIRECTORY)/windows/VC7/progs/glut/glut.vcproj
 
@@ -437,20 +422,9 @@ LIB_FILES = $(MAIN_FILES) $(DRI_FILES) $(SGI_GLU_FILES) $(GLW_FILES)
 
 
 # Everything for new a Mesa release:
-tarballs: rm_depend configure aclocal.m4 lib_gz demo_gz glut_gz \
-	lib_bz2 demo_bz2 glut_bz2 lib_zip demo_zip glut_zip md5
+tarballs: rm_depend lib_gz demo_gz glut_gz lib_bz2 demo_bz2 glut_bz2 lib_zip demo_zip glut_zip md5
 
 
-# Helper for autoconf builds
-ACLOCAL = aclocal
-ACLOCAL_FLAGS =
-AUTOCONF = autoconf
-AC_FLAGS =
-aclocal.m4: configure.ac acinclude.m4
-	$(ACLOCAL) $(ACLOCAL_FLAGS)
-configure: configure.ac aclocal.m4 acinclude.m4
-	$(AUTOCONF) $(AC_FLAGS)
-
 rm_depend:
 	@for dep in $(DEPEND_FILES) ; do \
 		rm -f $$dep ; \
@@ -459,7 +433,6 @@ rm_depend:
 
 lib_gz:
 	rm -f configs/current ; \
-	rm -f configs/autoconf ; \
 	cd .. ; \
 	tar -cf $(LIB_NAME).tar $(LIB_FILES) ; \
 	gzip $(LIB_NAME).tar ; \
@@ -479,7 +452,6 @@ glut_gz:
 
 lib_bz2:
 	rm -f configs/current ; \
-	rm -f configs/autoconf ; \
 	cd .. ; \
 	tar -cf $(LIB_NAME).tar $(LIB_FILES) ; \
 	bzip2 $(LIB_NAME).tar ; \
@@ -499,7 +471,6 @@ glut_bz2:
 
 lib_zip:
 	rm -f configs/current ; \
-	rm -f configs/autoconf ; \
 	rm -f $(LIB_NAME).zip ; \
 	cd .. ; \
 	zip -qr $(LIB_NAME).zip $(LIB_FILES) ; \
@@ -527,6 +498,3 @@ md5:
 	@-md5sum $(GLUT_NAME).tar.gz
 	@-md5sum $(GLUT_NAME).tar.bz2
 	@-md5sum $(GLUT_NAME).zip
-
-.PHONY: tarballs rm_depend lib_gz demo_gz glut_gz lib_bz2 demo_bz2 \
-	glut_bz2 lib_zip demo_zip glut_zip md5

acinclude.m4

@@ -1,119 +0,0 @@
-# A few convenience macros for Mesa, mostly to keep all the platform
-# specifics out of configure.ac.
-
-# MESA_PIC_FLAGS()
-#
-# Find out whether to build PIC code using the option --enable-pic and
-# the configure enable_static/enable_shared settings. If PIC is needed,
-# figure out the necessary flags for the platform and compiler.
-#
-# The platform checks have been shamelessly taken from libtool and
-# stripped down to just what's needed for Mesa. See _LT_COMPILER_PIC in
-# /usr/share/aclocal/libtool.m4 or
-# http://git.savannah.gnu.org/gitweb/?p=libtool.git;a=blob;f=libltdl/m4/libtool.m4;hb=HEAD
-#
-AC_DEFUN([MESA_PIC_FLAGS],
-[AC_REQUIRE([AC_PROG_CC])dnl
-AC_ARG_VAR([PIC_FLAGS], [compiler flags for PIC code])
-AC_ARG_ENABLE([pic],
-    [AS_HELP_STRING([--disable-pic],
-        [compile PIC objects @<:@default=enabled for shared builds
-        on supported platforms@:>@])],
-    [enable_pic="$enableval"
-    test "x$enable_pic" = x && enable_pic=auto],
-    [enable_pic=auto])
-# disable PIC by default for static builds
-if test "$enable_pic" = auto && test "$enable_static" = yes; then
-    enable_pic=no
-fi
-# if PIC hasn't been explicitly disabled, try to figure out the flags
-if test "$enable_pic" != no; then
-    AC_MSG_CHECKING([for $CC option to produce PIC])
-    # allow the user's flags to override
-    if test "x$PIC_FLAGS" = x; then
-        # see if we're using GCC
-        if test "x$GCC" = xyes; then
-            case "$host_os" in
-            aix*|beos*|cygwin*|irix5*|irix6*|osf3*|osf4*|osf5*)
-                # PIC is the default for these OSes.
-                ;;
-            mingw*|os2*|pw32*)
-                # This hack is so that the source file can tell whether
-                # it is being built for inclusion in a dll (and should
-                # export symbols for example).
-                PIC_FLAGS="-DDLL_EXPORT"
-                ;;
-            darwin*|rhapsody*)
-                # PIC is the default on this platform
-                # Common symbols not allowed in MH_DYLIB files
-                PIC_FLAGS="-fno-common"
-                ;;
-            hpux*)
-                # PIC is the default for IA64 HP-UX and 64-bit HP-UX,
-                # but not for PA HP-UX.
-                case $host_cpu in
-                hppa*64*|ia64*)
-                    ;;
-                *)
-                    PIC_FLAGS="-fPIC"
-                    ;;
-                esac
-                ;;
-            *)
-                # Everyone else on GCC uses -fPIC
-                PIC_FLAGS="-fPIC"
-                ;;
-            esac
-        else # !GCC
-            case "$host_os" in
-            hpux9*|hpux10*|hpux11*)
-                # PIC is the default for IA64 HP-UX and 64-bit HP-UX,
-                # but not for PA HP-UX.
-                case "$host_cpu" in
-                hppa*64*|ia64*)
-                    # +Z the default
-                    ;;
-                *)
-                    PIC_FLAGS="+Z"
-                    ;;
-                esac
-                ;;
-            linux*|k*bsd*-gnu)
-                case `basename "$CC"` in
-                icc*|ecc*|ifort*)
-                    PIC_FLAGS="-KPIC"
-                    ;;
-                pgcc*|pgf77*|pgf90*|pgf95*)
-                    # Portland Group compilers (*not* the Pentium gcc
-                    # compiler, which looks to be a dead project)
-                    PIC_FLAGS="-fpic"
-                    ;;
-                ccc*)
-                    # All Alpha code is PIC.
-                    ;;
-                xl*)
-                    # IBM XL C 8.0/Fortran 10.1 on PPC
-                    PIC_FLAGS="-qpic"
-                    ;;
-                *)
-                    case `$CC -V 2>&1 | sed 5q` in
-                    *Sun\ C*|*Sun\ F*)
-                        # Sun C 5.9 or Sun Fortran
-                        PIC_FLAGS="-KPIC"
-                        ;;
-                    esac
-                esac
-                ;;
-            solaris*)
-                PIC_FLAGS="-KPIC"
-                ;;
-            sunos4*)
-                PIC_FLAGS="-PIC"
-                ;;
-            esac
-        fi # GCC
-    fi # PIC_FLAGS
-    AC_MSG_RESULT([$PIC_FLAGS])
-fi
-AC_SUBST([PIC_FLAGS])
-])# MESA_PIC_FLAGS

autogen.sh

@@ -1,16 +0,0 @@
-#! /bin/sh
-
-srcdir=`dirname "$0"`
-test -z "$srcdir" && srcdir=.
-
-SRCDIR=`(cd "$srcdir" && pwd)`
-ORIGDIR=`pwd`
-
-if test "x$SRCDIR" != "x$ORIGDIR"; then
-	echo "Mesa cannot be built when srcdir != builddir" 1>&2
-	exit 1
-fi
-
-autoreconf -v --install || exit 1
-
-"$srcdir"/configure "$@"

bin/confdiff.sh

@@ -1,48 +0,0 @@
-#!/bin/bash -e
-
-usage()
-{
-	echo "Usage: $0 <target1> <target2>"
-	echo "Highlight differences between Mesa configs"
-	echo "Example:"
-	echo "  $0 linux linux-x86"
-}
-
-die()
-{
-	echo "$@" >&2
-	return 1
-}
-
-case "$1" in
--h|--help) usage; exit 0;;
-esac
-
-[ $# -lt 2 ] && die 2 targets needed. See $0 --help
-target1=$1
-target2=$2
-
-topdir=$(cd "`dirname $0`"/..; pwd)
-cd "$topdir"
-
-[ -f "./configs/$target1" ] || die Missing configs/$target1
-[ -f "./configs/$target2" ] || die Missing configs/$target2
-
-trap 'rm -f "$t1" "$t2"' 0
-
-t1=$(mktemp)
-t2=$(mktemp)
-
-make -f- -n -p <<EOF | sed '/^# Not a target/,/^$/d' > $t1
-TOP = .
-include \$(TOP)/configs/$target1
-default:
-EOF
-
-make -f- -n -p <<EOF | sed '/^# Not a target/,/^$/d' > $t2
-TOP = .
-include \$(TOP)/configs/$target2
-default:
-EOF
-
-diff -pu -I'^#' $t1 $t2

bin/install-sh

@@ -1 +0,0 @@
-minstall

bin/minstall

@@ -42,8 +42,6 @@ if [ $# -ge 2 ] ; then
 			exit 0
 		fi
 
-		PWDSAVE=`pwd`
-
 		# determine file's type
 		if [ -h "$FILE" ] ; then
 			#echo $FILE is a symlink
@@ -59,6 +57,7 @@ if [ $# -ge 2 ] ; then
 
 			FILE=`basename "$FILE"`
 			# Go to $DEST and make the link
+			PWDSAVE="$PWD"
 			cd "$DEST"        # pushd
 				$RM "$FILE"
 				$SYMLINK "$TARGET" "$FILE"

bin/mklib

@@ -34,7 +34,6 @@ MINOR=0
 PATCH=""
 DEPS=""
 LINK=""
-LDFLAGS=""
 CPLUSPLUS=0
 STATIC=0
 DLOPEN=0
@@ -43,7 +42,7 @@ ARCH="auto"
 ARCHOPT=""
 NOPREFIX=0
 EXPORTS=""
-ID=""
+
 
 #
 # Parse arguments
@@ -61,21 +60,17 @@ do
 	    echo '  -minor N      specifies minor version number (default is 0)'
 	    echo '  -patch N      specifies patch version number (default is 0)'
 	    echo '  -lLIBRARY     specifies a dependency on LIBRARY'
-	    echo '  -LDIR         search in DIR for library dependencies at build time'
-	    echo '  -RDIR         search in DIR for library dependencies at run time'
+	    echo '  -LDIR         search in DIR for library dependencies'
 	    echo '  -linker L     explicity specify the linker program to use (eg: gcc, g++)'
 	    echo '                Not observed on all systems at this time.'
-	    echo '  -ldflags OPT  specify any additional linker flags in OPT'
 	    echo '  -cplusplus    link with C++ runtime'
 	    echo '  -static       make a static library (default is dynamic/shared)'
 	    echo '  -dlopen       make a shared library suitable for dynamic loading'
 	    echo '  -install DIR  put resulting library file(s) in DIR'
 	    echo '  -arch ARCH    override using `uname` to determine host system'
 	    echo '  -archopt OPT  specify an extra achitecture-specific option OPT'
-	    echo '  -altopts OPTS alternate options to override all others'
 	    echo "  -noprefix     don't prefix library name with 'lib' nor add any suffix"
 	    echo '  -exports FILE only export the symbols listed in FILE'
-	    echo '  -id NAME      Sets the id of the dylib (Darwin)'
 	    echo '  -h, --help    display this information and exit'
 	    exit 1
 	    ;;
@@ -99,27 +94,18 @@ do
 	    shift 1;
 	    LINK=$1
 	    ;;
-	'-ldflags')
-	    shift 1;
-	    LDFLAGS=$1
-	    ;;
 	-l*)
 	    DEPS="$DEPS $1"
 	    ;;
 	-L*)
 	    DEPS="$DEPS $1"
 	    ;;
-	-R*)
-	    DEPS="$DEPS $1"
-	    ;;
-	-Wl*)
-            DEPS="$DEPS $1"
-            ;;
 	-pthread)
 	    # this is a special case (see bugzilla 10876)
 	    DEPS="$DEPS $1"
 	    ;;
 	'-pthread')
+	    # for FreeBSD
 	    DEPS="$DEPS -pthread"
 	    ;;
 	'-cplusplus')
@@ -143,10 +129,6 @@ do
 	    shift 1;
 	    ARCHOPT=$1
 	    ;;
-	'-altopts')
-            shift 1;
-            ALTOPTS=$1
-            ;;
 	'-noprefix')
 	    NOPREFIX=1
 	    ;;
@@ -154,10 +136,6 @@ do
 	    shift 1;
 	    EXPORTS=$1
 	    ;;
-	'-id')
-	    shift 1;
-	    ID=$1
-	    ;;
 	-*)
 	    echo "mklib: Unknown option: " $1 ;
 	    exit 1
@@ -201,7 +179,6 @@ if [  ]  ; then
     echo PATCH is $PATCH
     echo DEPS are $DEPS
     echo "EXPORTS in" $EXPORTS
-    echo ID is $ID
     echo "-----------------"
 fi
 
@@ -211,7 +188,7 @@ fi
 #
 case $ARCH in
 
-    'Linux' | 'OpenBSD' | 'DragonFly' | 'GNU' | GNU/*)
+    'Linux' | 'OpenBSD' | 'GNU' | GNU/*)
 	# we assume gcc
 
 	if [ "x$LINK" = "x" ] ; then
@@ -226,13 +203,8 @@ case $ARCH in
 	if [ $NOPREFIX = 1 ] ; then
 	    # No "lib" or ".so" part
 	    echo "mklib: Making" $ARCH "shared library: " ${LIBNAME}
-	    case $ARCH in 'Linux' | 'GNU' | GNU/*)
-		OPTS="-Xlinker -Bsymbolic -shared"
-	    ;;
-	    *)
-		OPTS="-shared"
-	    ;;
-	    esac
+	    #OPTS="-shared -Wl,-soname,${LIBNAME}"  # soname???
+	    OPTS="-shared"
 
 	    # Check if objects are 32-bit and we're running in 64-bit
 	    # environment.  If so, pass -m32 flag to linker.
@@ -242,13 +214,9 @@ case $ARCH in
 		OPTS="-m32 ${OPTS}"
 	    fi
 
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
-
             rm -f ${LIBNAME}
             # make lib
-            ${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
+            ${LINK} ${OPTS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
             # finish up
             FINAL_LIBS="${LIBNAME}"
         elif [ $STATIC = 1 ] ; then
@@ -256,35 +224,10 @@ case $ARCH in
             echo "mklib: Making" $ARCH "static library: " ${LIBNAME}
             LINK="ar"
             OPTS="-ru"
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
             rm -f ${LIBNAME}
-
-	    # expand any .a objects into constituent .o files.
-	    NEWOBJECTS=""
-	    DELETIA=""
-	    for OBJ in ${OBJECTS} ; do
-		if [ `expr match $OBJ '.*\.a'` -gt 0 ] ; then
-		    # extract the .o files from this .a archive
-		    FILES=`ar t $OBJ`
-		    ar x $OBJ
-		    NEWOBJECTS="$NEWOBJECTS $FILES"
-		    # keep track of temporary .o files and delete them below
-		    DELETIA="$DELETIA $FILES"
-		else
-		    # ordinary .o file
-		    NEWOBJECTS="$NEWOBJECTS $OBJ"
-		fi
-	    done
-
             # make lib
-            ${LINK} ${OPTS} ${LIBNAME} ${NEWOBJECTS}
+            ${LINK} ${OPTS} ${LIBNAME} ${OBJECTS}
             ranlib ${LIBNAME}
-
-	    # remove temporary extracted .o files
-	    rm -f ${DELETIA}
-
             # finish up
             FINAL_LIBS=${LIBNAME}
         else
@@ -299,7 +242,7 @@ case $ARCH in
 	    if [ $EXPORTS ] ; then
 		#OPTS="${OPTS} -Xlinker --retain-symbols-file ${EXPORTS}"
 		# Make the 'exptmp' file for --version-script option
-		echo "{" > exptmp
+		echo "VERSION_${MAJOR}.${MINOR} {" > exptmp
 		echo "global:" >> exptmp
 		sed 's/$/;/' ${EXPORTS} >> exptmp
 		echo "local:" >> exptmp
@@ -316,9 +259,6 @@ case $ARCH in
 	    if [ "${ABI32}" -a `uname -m` = "x86_64" ] ; then
 		OPTS="-m32 ${OPTS}"
 	    fi
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
 
 	    if [ x${PATCH} = "x" ] ; then
 		VERSION="${MAJOR}.${MINOR}"
@@ -334,7 +274,7 @@ case $ARCH in
             rm -f ${LIBNAME}.so
 
             # make lib
-            ${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME}.so.${VERSION} ${OBJECTS} ${DEPS}
+            ${LINK} ${OPTS} -o ${LIBNAME}.so.${VERSION} ${OBJECTS} ${DEPS}
             # make usual symlinks
             ln -s ${LIBNAME}.so.${VERSION} ${LIBNAME}.so.${MAJOR}
             ln -s ${LIBNAME}.so.${MAJOR} ${LIBNAME}.so
@@ -368,7 +308,7 @@ case $ARCH in
 			# use g++
 			LINK="g++"
 		    else
-			echo "mklib: warning: can't find C++ compiler, trying CC."
+			echo "mklib: warning: can't find C++ comiler, trying CC."
 			LINK="CC"
 		    fi
 		else
@@ -397,23 +337,19 @@ case $ARCH in
 	    # Check if objects are SPARC v9
 	    # file says: ELF 64-bit MSB relocatable SPARCV9 Version 1
 	    set ${OBJECTS}
-	    if [ ${LINK} = "cc" -o ${LINK} = "CC" ] ; then
-		SPARCV9=`file $1 | grep SPARCV9`
-		if [ "${SPARCV9}" ] ; then
-		    OPTS="${OPTS} -xarch=v9"
-		fi
+	    SPARCV9=`file $1 | grep SPARCV9`
+	    if [ "${SPARCV9}" ] ; then
+		OPTS="${OPTS} -xarch=v9"
 	    fi
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
+
 	    # for debug:
 	    #echo "mklib: linker is" ${LINK} ${OPTS}
 	    if [ $NOPREFIX = 1 ] ; then
 		rm -f ${LIBNAME}
-		${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
+		${LINK} ${OPTS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
 	    else
 		rm -f ${LIBNAME}.${MAJOR} ${LIBNAME}
-		${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME}.${MAJOR} -h ${LIBNAME}.${MAJOR} ${OBJECTS} ${DEPS}
+		${LINK} ${OPTS} -o ${LIBNAME}.${MAJOR} ${OBJECTS} ${DEPS}
 		ln -s ${LIBNAME}.${MAJOR} ${LIBNAME}
 	    fi
 	    FINAL_LIBS="${LIBNAME}.${MAJOR} ${LIBNAME}"
@@ -436,11 +372,8 @@ case $ARCH in
 	    # No "lib" or ".so" part
 	    echo "mklib: Making FreeBSD shared library: " ${LIBNAME}
 	    OPTS="-shared"
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
 	    rm -f ${LIBNAME}
-	    ${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
+	    ${LINK} ${OPTS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
 	    FINAL_LIBS=${LIBNAME}
         elif [ $STATIC = 1 ] ; then
 	    STLIB="lib${LIBNAME}.a"
@@ -452,12 +385,9 @@ case $ARCH in
 	else
 	    SHLIB="lib${LIBNAME}.so.${MAJOR}"
 	    OPTS="-shared -Wl,-soname,${SHLIB}"
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
 	    echo "mklib: Making FreeBSD shared library: " ${SHLIB}
 	    rm -f ${SHLIB}
-	    ${LINK} ${OPTS} ${LDFLAGS} -o ${SHLIB} ${OBJECTS} ${DEPS}
+	    ${LINK} ${OPTS} -o ${SHLIB} ${OBJECTS} ${DEPS}
 	    ln -sf ${SHLIB} "lib${LIBNAME}.so"
 	    FINAL_LIBS="${SHLIB} lib${LIBNAME}.so"
 	fi
@@ -508,10 +438,6 @@ case $ARCH in
 		exit 1
 	    fi
 
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
-
 	    if [ $CPLUSPLUS = 1 ] ; then
 		LINK="CC"
 	    else
@@ -519,7 +445,7 @@ case $ARCH in
 	    fi
 
 	    echo "mklib: Making IRIX " ${ABI} " shared library: " ${LIBNAME}
-	    ${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
+	    ${LINK} ${OPTS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
 	    FINAL_LIBS=${LIBNAME}
 	fi
 	;;
@@ -592,16 +518,12 @@ case $ARCH in
 		}
 	    }' | sort -u >> ${EXPFILE}
 
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
-
             # On AIX a shared library is linked differently when
             # you want to dlopen the file
 	    if [ $DLOPEN = "1" ] ; then
-		cc -G ${OPTS} ${LDFLAGS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
+		cc -G ${OPTS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
 	    else
-		cc ${OPTS} ${LDFLAGS} -o ${OFILE} ${OBJECTS} ${DEPS}
+		cc ${OPTS} -o ${OFILE} ${OBJECTS} ${DEPS}
 		ar ${X64} -r ${LIBNAME} ${OFILE}
 	    fi
 
@@ -647,9 +569,6 @@ case $ARCH in
             echo "mklib: Making Darwin static library: " ${LIBNAME}
             LINK="ar"
             OPTS="-ruvs"
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
             ${LINK} ${OPTS} ${LIBNAME} ${OBJECTS}
             FINAL_LIBS=${LIBNAME}
         else
@@ -658,46 +577,22 @@ case $ARCH in
                 LIBSUFFIX="bundle"
                 OPTS="${ARCHOPT} -bundle -multiply_defined suppress"
             else
-                LIBSUFFIX="dylib"
-                if [ -z "$ID" ] ; then
-                    ID="lib${LIBNAME}.${MAJOR}.${LIBSUFFIX}"
-                fi
-                OPTS="${ARCHOPT} -dynamiclib -multiply_defined suppress -current_version ${MAJOR}.${MINOR}.0 -compatibility_version ${MAJOR}.${MINOR}.0 -install_name ${ID}"
+		LIBSUFFIX="dylib"
+                OPTS="${ARCHOPT} -dynamiclib -multiply_defined suppress -current_version ${MAJOR}.${MINOR}.0 -compatibility_version ${MAJOR}.${MINOR}.0 -install_name lib${LIBNAME}.${MAJOR}.${LIBSUFFIX}"
             fi
-
-            if [ ${EXPORTS} ] ; then
-                if [ -f ${EXPORTS}".darwin" ] ; then
-                    EXPORTS=$EXPORTS".darwin"
-                fi
-                OPTS="${OPTS} -exported_symbols_list ${EXPORTS}"
-            fi
-
-            LINKNAME="lib${LIBNAME}.${MAJOR}.${LIBSUFFIX}"
-            LINKNAME2="lib${LIBNAME}.${LIBSUFFIX}"
-            LIBNAME="lib${LIBNAME}.${MAJOR}.${MINOR}.${LIBSUFFIX}"
+            LINKNAME="lib${LIBNAME}.${LIBSUFFIX}"
+            LIBNAME="lib${LIBNAME}.${MAJOR}.${LIBSUFFIX}"
 
 	    # examine first object to determine ABI
     	    set ${OBJECTS}
-            ABI_PPC=`file $1 | grep ' ppc'`
-            ABI_I386=`file $1 | grep ' i386'`
-            ABI_PPC64=`file $1 | grep ' ppc64'`
-            ABI_X86_64=`file $1 | grep ' x86_64'`
-            if [ "${ABI_PPC}" ] ; then
-                OPTS="${OPTS} -arch ppc"
-            fi
-            if [ "${ABI_I386}" ] ; then
-                OPTS="${OPTS} -arch i386"
-            fi
-            if [ "${ABI_PPC64}" ] ; then
-                OPTS="${OPTS} -arch ppc64"
-            fi
-            if [ "${ABI_X86_64}" ] ; then
-                OPTS="${OPTS} -arch x86_64"
-            fi
-
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
+	    ABI_PPC=`file $1 | grep 'object ppc'`
+	    ABI_I386=`file $1 | grep 'object i386'`
+	    if [ "${ABI_PPC}" ] ; then
+		OPTS="${OPTS} -arch ppc"
+	    fi
+	    if [ "${ABI_I386}" ] ; then
+		OPTS="${OPTS} -arch i386"
+	    fi
 
 	    # XXX can we always add -isysroot /Developer/SDKs/MacOSX10.4u.sdk
 	    # to OPTS here?
@@ -710,11 +605,9 @@ case $ARCH in
 	    fi
 
             echo "mklib: Making Darwin shared library: " ${LIBNAME}
-
-            ${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
+            ${LINK} ${OPTS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
             ln -s ${LIBNAME} ${LINKNAME}
-            ln -s ${LIBNAME} ${LINKNAME2}
-            FINAL_LIBS="${LIBNAME} ${LINKNAME} ${LINKNAME2}"
+            FINAL_LIBS="${LIBNAME} ${LINKNAME}"
         fi
         ;;
 
@@ -766,9 +659,6 @@ case $ARCH in
             echo "mklib: Making Intel ICC static library: " ${LIBNAME}.a
             LINK="ar"
             OPTS="-ruv"
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
             # make lib
             ${LINK} ${OPTS} ${LIBNAME}.a ${OBJECTS}
             # finish up
@@ -779,9 +669,6 @@ case $ARCH in
             else
                  OPTS="-shared"
             fi
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
             VERSION="${MAJOR}.${MINOR}.${PATCH}"
             echo "mklib: Making Intel ICC shared library: " ${LIBNAME}.so.${VERSION}
 
@@ -795,7 +682,7 @@ case $ARCH in
             rm -f ${LIBNAME}.so.${MAJOR}
             rm -f ${LIBNAME}.so
             # make lib
-            ${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME}.so.${VERSION} ${OBJECTS} ${DEPS}
+            ${LINK} ${OPTS} -o ${LIBNAME}.so.${VERSION} ${OBJECTS} ${DEPS}
             # make usual symlinks
             ln -s ${LIBNAME}.so.${VERSION} ${LIBNAME}.so.${MAJOR}
             ln -s ${LIBNAME}.so.${MAJOR} ${LIBNAME}.so
@@ -846,9 +733,6 @@ case $ARCH in
             echo "mklib: Making" $ARCH "static library: " ${LIBNAME}.a
             LINK="ar"
             OPTS="-ru"
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
             # make lib
             ${LINK} ${OPTS} ${LIBNAME}.a ${OBJECTS}
 	    ranlib ${LIBNAME}.a
@@ -856,9 +740,6 @@ case $ARCH in
             FINAL_LIBS=${LIBNAME}.a
         else
 	    OPTS="-shared -Wl,-export-all -Wl,--out-implib=${LIBNAME}-${MAJOR}.dll.a"
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
             echo "mklib: Making" $ARCH "shared library: " ${LIBNAME}-${MAJOR}.dll
 
             if [ $CPLUSPLUS = 1 ] ; then
@@ -873,7 +754,7 @@ case $ARCH in
             rm -f ${LIBNAME}.a
 
             # make lib
-            ${LINK} ${OPTS} ${LDFLAGS} -o ${CYGNAME}-${MAJOR}.dll ${OBJECTS} ${DEPS}
+            ${LINK} ${OPTS} -o ${CYGNAME}-${MAJOR}.dll ${OBJECTS} ${DEPS}
             # make usual symlinks
             ln -s ${LIBNAME}-${MAJOR}.dll.a ${LIBNAME}.dll.a
             # finish up

bin/version.mk

@@ -1,17 +0,0 @@
-#!/usr/bin/make -sf
-# Print the various Mesa version fields. This is mostly used to add the
-# version to configure.
-
-# This reflects that this script is usually called from the toplevel
-TOP = .
-
-include $(TOP)/configs/default
-
-version:
-	@echo $(MESA_VERSION)
-major:
-	@echo $(MESA_MAJOR)
-minor:
-	@echo $(MESA_MINOR)
-tiny:
-	@echo $(MESA_TINY)

configs/.gitignore

@@ -1,2 +1 @@
 current
-autoconf

configs/aix-gcc

@@ -11,10 +11,6 @@ CXX = g++
 CFLAGS = -O2 -DAIXV3
 CXXFLAGS = -O2 -DAIXV3
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 MKLIB_OPTIONS = -arch aix-gcc
 GL_LIB_DEPS = -lX11 -lXext -lm
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lm

configs/autoconf.in

@@ -1,125 +0,0 @@
-# Autoconf configuration
-
-# Pull in the defaults
-include $(TOP)/configs/default
-
-# This is generated by configure
-CONFIG_NAME = autoconf
-
-# Compiler and flags
-CC = @CC@
-CXX = @CXX@
-OPT_FLAGS = @OPT_FLAGS@
-ARCH_FLAGS = @ARCH_FLAGS@
-ASM_FLAGS = @ASM_FLAGS@
-PIC_FLAGS = @PIC_FLAGS@
-DEFINES = @DEFINES@
-CFLAGS = @CPPFLAGS@ @CFLAGS@ \
-	$(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(ASM_FLAGS) $(DEFINES)
-CXXFLAGS = @CPPFLAGS@ @CXXFLAGS@ \
-	$(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
-LDFLAGS = @LDFLAGS@
-EXTRA_LIB_PATH = @EXTRA_LIB_PATH@
-
-# Assembler
-ASM_SOURCES = @ASM_SOURCES@
-ASM_API = @ASM_API@
-
-# Misc tools and flags
-MAKE = @MAKE@
-SHELL = @SHELL@
-MKLIB_OPTIONS = @MKLIB_OPTIONS@
-MKDEP = @MKDEP@
-MKDEP_OPTIONS = @MKDEP_OPTIONS@
-
-# Python and flags (generally only needed by the developers)
-PYTHON2 = python
-PYTHON_FLAGS = -t -O -O
-
-# Library names (base name)
-GL_LIB = GL
-GLU_LIB = GLU
-GLUT_LIB = glut
-GLW_LIB = GLw
-OSMESA_LIB = @OSMESA_LIB@
-
-# Library names (actual file names)
-GL_LIB_NAME = @GL_LIB_NAME@
-GLU_LIB_NAME = @GLU_LIB_NAME@
-GLUT_LIB_NAME = @GLUT_LIB_NAME@
-GLW_LIB_NAME = @GLW_LIB_NAME@
-OSMESA_LIB_NAME = @OSMESA_LIB_NAME@
-
-# Directories to build
-LIB_DIR = @LIB_DIR@
-SRC_DIRS = @SRC_DIRS@
-GLU_DIRS = @GLU_DIRS@
-DRIVER_DIRS = @DRIVER_DIRS@
-# Which subdirs under $(TOP)/progs/ to enter:
-PROGRAM_DIRS = @PROGRAM_DIRS@
-
-# Driver specific build vars
-DRI_DIRS = @DRI_DIRS@
-WINDOW_SYSTEM = @WINDOW_SYSTEM@
-USING_EGL = @USING_EGL@
-
-# Dependencies
-X11_INCLUDES = @X11_INCLUDES@
-
-# GLw motif setup
-GLW_SOURCES = @GLW_SOURCES@
-MOTIF_CFLAGS = @MOTIF_CFLAGS@
-
-# Library/program dependencies
-GL_LIB_DEPS = $(EXTRA_LIB_PATH) @GL_LIB_DEPS@
-OSMESA_LIB_DEPS = -L$(TOP)/$(LIB_DIR) @OSMESA_MESA_DEPS@ \
-	$(EXTRA_LIB_PATH) @OSMESA_LIB_DEPS@
-GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) @GLU_MESA_DEPS@ \
-	$(EXTRA_LIB_PATH) @GLU_LIB_DEPS@
-GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) @GLUT_MESA_DEPS@ \
-	$(EXTRA_LIB_PATH) @GLUT_LIB_DEPS@
-GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) @GLW_MESA_DEPS@ \
-	$(EXTRA_LIB_PATH) @GLW_LIB_DEPS@
-APP_LIB_DEPS = $(EXTRA_LIB_PATH) @APP_LIB_DEPS@
-
-# DRI dependencies
-DRI_LIB_DEPS = $(EXTRA_LIB_PATH) @DRI_LIB_DEPS@
-LIBDRM_CFLAGS = @LIBDRM_CFLAGS@
-LIBDRM_LIB = @LIBDRM_LIBS@
-DRI2PROTO_CFLAGS = @DRI2PROTO_CFLAGS@
-EXPAT_INCLUDES = @EXPAT_INCLUDES@
-
-# Autoconf directories
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-libdir = @libdir@
-includedir = @includedir@
-
-# Installation directories (for make install)
-INSTALL_DIR = $(prefix)
-INSTALL_LIB_DIR = $(libdir)
-INSTALL_INC_DIR = $(includedir)
-
-# DRI installation directories
-DRI_DRIVER_INSTALL_DIR = @DRI_DRIVER_INSTALL_DIR@
-
-# Where libGL will look for DRI hardware drivers
-DRI_DRIVER_SEARCH_DIR = $(DRI_DRIVER_INSTALL_DIR)
-
-# pkg-config substitutions
-GL_PC_REQ_PRIV = @GL_PC_REQ_PRIV@
-GL_PC_LIB_PRIV = @GL_PC_LIB_PRIV@
-GL_PC_CFLAGS = @GL_PC_CFLAGS@
-DRI_PC_REQ_PRIV = @DRI_PC_REQ_PRIV@
-GLU_PC_REQ = @GLU_PC_REQ@
-GLU_PC_REQ_PRIV = @GLU_PC_REQ_PRIV@
-GLU_PC_LIB_PRIV = @GLU_PC_LIB_PRIV@
-GLU_PC_CFLAGS = @GLU_PC_CFLAGS@
-GLUT_PC_REQ_PRIV = @GLUT_PC_REQ_PRIV@
-GLUT_PC_LIB_PRIV = @GLUT_PC_LIB_PRIV@
-GLUT_PC_CFLAGS = @GLUT_PC_CFLAGS@
-GLW_PC_REQ_PRIV = @GLW_PC_REQ_PRIV@
-GLW_PC_LIB_PRIV = @GLW_PC_LIB_PRIV@
-GLW_PC_CFLAGS = @GLW_PC_CFLAGS@
-OSMESA_PC_REQ = @OSMESA_PC_REQ@
-OSMESA_PC_LIB_PRIV = @OSMESA_PC_LIB_PRIV@

configs/beos

@@ -39,10 +39,6 @@ ifeq ($(CPU), x86)
 
 	CXXFLAGS = $(CFLAGS)
 
-	# Work around aliasing bugs - developers should comment this out
-	CFLAGS += -fno-strict-aliasing
-	CXXFLAGS += -fno-strict-aliasing
-
 	LDFLAGS += -Xlinker
 
 	ifdef DEBUG

configs/bluegene-osmesa

@@ -1,33 +0,0 @@
-# Configuration for building only libOSMesa on BlueGene, no Xlib driver
-# This doesn't really have a lot of dependencies, so it should be usable
-# on other (gcc-based) systems too.
-# It uses static linking and disables multithreading.
-
-include $(TOP)/configs/default
-
-CONFIG_NAME = bluegene-osmesa
-
-# Compiler and flags
-CC = /bgl/BlueLight/ppcfloor/blrts-gnu/bin/powerpc-bgl-blrts-gnu-gcc
-CXX = /bgl/BlueLight/ppcfloor/blrts-gnu/bin/powerpc-bgl-blrts-gnu-g++
-CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
-CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURC
-
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
-MKLIB_OPTIONS = -static
-
-OSMESA_LIB_NAME = libOSMesa.a
-
-# Directories
-SRC_DIRS = mesa glu
-DRIVER_DIRS = osmesa
-PROGRAM_DIRS = osdemos
-
-
-# Dependencies
-OSMESA_LIB_DEPS = -lm
-GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
-APP_LIB_DEPS = -lOSMesa -lGLU -lm

configs/bluegene-xlc-osmesa

@@ -1,29 +0,0 @@
-# Configuration for building only libOSMesa on BlueGene using the IBM xlc compiler
-# This doesn't really have a lot of dependencies, so it should be usable
-# on similar systems too.
-# It uses static linking and disables multithreading.
-
-include $(TOP)/configs/default
-
-CONFIG_NAME = bluegene-osmesa
-
-# Compiler and flags
-CC = /opt/ibmcmp/vacpp/bg/8.0/bin/blrts_xlc
-CXX = /opt/ibmcmp/vacpp/bg/8.0/bin/blrts_xlC
-CFLAGS = -O3 -pedantic -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
-CXXFLAGS = -O3 -pedantic -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
-
-MKLIB_OPTIONS = -static
-
-OSMESA_LIB_NAME = libOSMesa.a
-
-# Directories
-SRC_DIRS = mesa glu
-DRIVER_DIRS = osmesa
-PROGRAM_DIRS = osdemos
-
-
-# Dependencies
-OSMESA_LIB_DEPS = -lm
-GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
-APP_LIB_DEPS = -lOSMesa -lGLU -lm

configs/catamount-osmesa-pgi

@@ -1,32 +0,0 @@
-# Configuration for building only libOSMesa on Cray Xt3
-# for the compute nodes running Catamount using the 
-# Portland Group compiler. The Portland Group toolchain has to be 
-# enabled before using "module switch PrgEnv-gnu PrgEnv-pgi" .
-# This doesn't really have a lot of dependencies, so it should be usable
-# on other similar systems too.
-# It uses static linking and disables multithreading.
-
-include $(TOP)/configs/default
-
-CONFIG_NAME = catamount-osmesa-pgi
-
-# Compiler and flags
-CC = cc
-CXX = CC
-CFLAGS = -target=catamount -fastsse -O3 -Mnontemporal -Mprefetch=distance:8,nta   -fPIC -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
-CXXFLAGS = -target=catamount -fastsse -O3 -Mnontemporal -Mprefetch=distance:8,nta -fPIC -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
-
-MKLIB_OPTIONS = -static
-
-OSMESA_LIB_NAME = libOSMesa.a
-
-# Directories
-SRC_DIRS = mesa glu
-DRIVER_DIRS = osmesa
-PROGRAM_DIRS = osdemos
-
-
-# Dependencies
-OSMESA_LIB_DEPS = -lm
-GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
-APP_LIB_DEPS = -lOSMesa -lGLU -lm

configs/config.mgw

@@ -1,42 +1,42 @@
-# MinGW config include file updated for Mesa 7.0
-#
-#  Updated : by Heromyth, on 2007-7-21
-#  Email   : zxpmyth@yahoo.com.cn
-#  Bugs    : 1) All the default settings work fine. But the setting X86=1 can't work. 
-#            The others havn't been tested yet.
-#            2) The generated DLLs are *not* compatible with the ones built
-#            with the other compilers like VC8, especially for GLUT. 
-#            3) Although more tests are needed, it can be used individually!
-
-# The generated DLLs by MingW with STDCALL are not totally compatible 
-# with the ones linked by Microsoft's compilers.
-#
-# xxx_USING_STDCALL = 1          Compiling MESA with __stdcall. This is default!
-# 
-# xxx_USING_STDCALL = 0          Compiling MESA without __stdcall. I like this:)
-#  
-
-# In fact, GL_USING_STDCALL and GLUT_USING_STDCALL can be
-# different. For example:
-#
-#   GL_USING_STDCALL = 0
-#   GLUT_USING_STDCALL = 1
-# 
-# Suggested setting:
-#
-#     ALL_USING_STDCALL = 1
-#
-# That's default!
-#
-
-
-ALL_USING_STDCALL = 1
-
-
-ifeq ($(ALL_USING_STDCALL),1)
-  GL_USING_STDCALL = 1
-  GLUT_USING_STDCALL = 1
-else
-  GL_USING_STDCALL = 0
-  GLUT_USING_STDCALL = 0
-endif
+# MinGW config include file updated for Mesa 7.0
+#
+#  Updated : by Heromyth, on 2007-7-21
+#  Email   : zxpmyth@yahoo.com.cn
+#  Bugs    : 1) All the default settings work fine. But the setting X86=1 can't work. 
+#            The others havn't been tested yet.
+#            2) The generated DLLs are *not* compatible with the ones built
+#            with the other compilers like VC8, especially for GLUT. 
+#            3) Although more tests are needed, it can be used individually!
+
+# The generated DLLs by MingW with STDCALL are not totally compatible 
+# with the ones linked by Microsoft's compilers.
+#
+# xxx_USING_STDCALL = 1          Compiling MESA with __stdcall. This is default!
+# 
+# xxx_USING_STDCALL = 0          Compiling MESA without __stdcall. I like this:)
+#  
+
+# In fact, GL_USING_STDCALL and GLUT_USING_STDCALL can be
+# different. For example:
+#
+#   GL_USING_STDCALL = 0
+#   GLUT_USING_STDCALL = 1
+# 
+# Suggested setting:
+#
+#     ALL_USING_STDCALL = 1
+#
+# That's default!
+#
+
+
+ALL_USING_STDCALL = 1
+
+
+ifeq ($(ALL_USING_STDCALL),1)
+  GL_USING_STDCALL = 1
+  GLUT_USING_STDCALL = 1
+else
+  GL_USING_STDCALL = 0
+  GLUT_USING_STDCALL = 0
+endif

configs/darwin

@@ -4,26 +4,11 @@ include $(TOP)/configs/default
 
 CONFIG_NAME = darwin
 
-INSTALL_DIR = /usr/X11
-
 # Compiler and flags
-CC = gcc
-CXX = gcc
-PIC_FLAGS = -fPIC
-DEFINES =  -D_DARWIN_C_SOURCE -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L \
-	   -D_BSD_SOURCE -D_SVID_SOURCE -D_GNU_SOURCE -DPTHREADS \
-	   -DGLX_ALIAS_UNSUPPORTED -DGLX_INDIRECT_RENDERING
-
-# -DGLX_DIRECT_RENDERING - pulls in libdrm stuff in glx/x11
-# -DGLX_USE_APPLEGL      - supposed to be used with GLX_DIRECT_RENDERING to use AGL rather than DRM, but doesn't compile
-# -DIN_DRI_DRIVER
-
-ARCH_FLAGS += $(RC_CFLAGS)
-
-CFLAGS =  -ggdb3 -Os -Wall -Wmissing-prototypes -std=c99 -ffast-math -fno-strict-aliasing \
-	-I$(INSTALL_DIR)/include $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(ASM_FLAGS) $(DEFINES)
-CXXFLAGS =  -ggdb3 -Os -Wall -fno-strict-aliasing \
-	-I$(INSTALL_DIR)/include $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(ASM_FLAGS) $(DEFINES)
+CC = cc
+CXX = cc
+CFLAGS = -I/usr/X11R6/include -O3 -fPIC -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
+CXXFLAGS = -I/usr/X11R6/include -O3 -fPIC -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
 
 # Library names (actual file names)
 GL_LIB_NAME = libGL.dylib
@@ -32,24 +17,13 @@ GLUT_LIB_NAME = libglut.dylib
 GLW_LIB_NAME = libGLw.dylib
 OSMESA_LIB_NAME = libOSMesa.dylib
 
-# globs used to install the lib and all symlinks
-GL_LIB_GLOB = libGL.*dylib
-GLU_LIB_GLOB = libGLU.*dylib
-GLUT_LIB_GLOB = libglut.*dylib
-GLW_LIB_GLOB = libGLw.*dylib
-OSMESA_LIB_GLOB = libOSMesa.*dylib
-
-GL_LIB_DEPS = -L$(INSTALL_DIR)/$(LIB_DIR) -lX11 -lXext -lm -lpthread
-OSMESA_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB)
-GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB)
-GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB)  -L$(INSTALL_DIR)/$(LIB_DIR) -lX11 -lXmu -lXi -lXext
-GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -L$(INSTALL_DIR)/$(LIB_DIR) -lX11 -lXt
-APP_LIB_DEPS = -L$(TOP)/lib -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L$(INSTALL_DIR)/$(LIB_DIR) -lX11 -lXmu -lXt -lXi -lm
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread
+OSMESA_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -lGL
+GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -lGL
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -lGL -lGLU -L/usr/X11R6/lib -lX11 -lXmu -lXi -lXext
+GLW_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXt $(TOP)/lib/GL.dylib
+APP_LIB_DEPS = -L$(TOP)/lib -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
 
 # omit glw lib for now:
-SRC_DIRS = glx/x11 mesa glu glut/glx
-GLU_DIRS = sgi
-DRIVER_DIRS = osmesa
-#DRIVER_DIRS = dri
-DRI_DIRS = swrast
-PROGRAM_DIRS = xdemos
+SRC_DIRS = mesa glu glut/glx
+

configs/darwin-fat-32bit

@@ -1,7 +0,0 @@
-# Configuration for Darwin / MacOS X, making 32bit fat dynamic libs
-
-RC_CFLAGS=-arch ppc -arch i386
-
-include $(TOP)/configs/darwin
-
-CONFIG_NAME = darwin-fat-32bit

configs/darwin-fat-all

@@ -1,7 +0,0 @@
-# Configuration for Darwin / MacOS X, making 32bit and 64bit fat dynamic libs
-
-RC_CFLAGS=-arch ppc -arch i386 -arch ppc64 -arch x86_64
-
-include $(TOP)/configs/darwin
-
-CONFIG_NAME = darwin-fat-all

configs/darwin-static

@@ -0,0 +1,24 @@
+# Configuration for Darwin / MacOS X, making static libs
+
+include $(TOP)/configs/darwin
+
+CONFIG_NAME = darwin-static
+
+# Compiler and flags
+CFLAGS = -I/usr/X11R6/include -O3 -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
+CXXFLAGS = -I/usr/X11R6/include -O3 -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
+MKLIB_OPTIONS = -static
+
+# Library names (actual file names)
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a
+
+GL_LIB_DEPS =
+OSMESA_LIB_DEPS = 
+GLU_LIB_DEPS = 
+GLUT_LIB_DEPS = 
+GLW_LIB_DEPS = 
+APP_LIB_DEPS = -Wl,-search_paths_first -L$(TOP)/lib -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lstdc++ -lgcc_s.1 -lm

configs/darwin-static-x86ppc

@@ -0,0 +1,26 @@
+# Configuration for Darwin / MacOS X, making static libs
+
+include $(TOP)/configs/darwin
+
+CONFIG_NAME = darwin-static
+
+# Compiler and flags
+CFLAGS = -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk \
+         -I/usr/X11R6/include -O3 -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
+CXXFLAGS = -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk \
+           -I/usr/X11R6/include -O3 -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
+MKLIB_OPTIONS = -static -archopt "-isysroot /Developer/SDKs/MacOSX10.4u.sdk"
+
+# Library names (actual file names)
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a
+
+GL_LIB_DEPS =
+OSMESA_LIB_DEPS = 
+GLU_LIB_DEPS = 
+GLUT_LIB_DEPS = 
+GLW_LIB_DEPS = 
+APP_LIB_DEPS = -Wl,-search_paths_first -L$(TOP)/lib -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lstdc++ -lgcc_s.1 -lm

configs/darwin-x86ppc

@@ -0,0 +1,33 @@
+# Configuration for Darwin / MacOS X, making dynamic libs
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = darwin
+
+# Compiler and flags
+CC = cc
+CXX = cc
+CFLAGS = -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk \
+         -I/usr/X11R6/include -O3 -fPIC -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
+CXXFLAGS = -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk \
+         -I/usr/X11R6/include -O3 -fPIC -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
+
+MKLIB_OPTIONS = -archopt "-isysroot /Developer/SDKs/MacOSX10.4u.sdk"
+
+# Library names (actual file names)
+GL_LIB_NAME = libGL.dylib
+GLU_LIB_NAME = libGLU.dylib
+GLUT_LIB_NAME = libglut.dylib
+GLW_LIB_NAME = libGLw.dylib
+OSMESA_LIB_NAME = libOSMesa.dylib
+
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread
+OSMESA_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -lGL
+GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -lGL
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -lGL -lGLU -L/usr/X11R6/lib -lX11 -lXmu -lXi -lXext
+GLW_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXt $(TOP)/lib/GL.dylib
+APP_LIB_DEPS = -L$(TOP)/lib -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
+
+# omit glw lib for now:
+SRC_DIRS = mesa glu glut/glx
+

configs/default

@@ -9,9 +9,8 @@ CONFIG_NAME = default
 
 # Version info
 MESA_MAJOR=7
-MESA_MINOR=3
-MESA_TINY=0
-MESA_VERSION = $(MESA_MAJOR).$(MESA_MINOR).$(MESA_TINY)
+MESA_MINOR=0
+MESA_TINY=1
 
 # external projects.  This should be useless now that we use libdrm.
 DRM_SOURCE_PATH=$(TOP)/../drm
@@ -21,23 +20,18 @@ CC = cc
 CXX = CC
 CFLAGS = -O
 CXXFLAGS = -O
-LDFLAGS =
 GLU_CFLAGS = 
 
 # Misc tools and flags
-SHELL = /bin/sh
-MKLIB = $(SHELL) $(TOP)/bin/mklib
 MKLIB_OPTIONS = 
 MKDEP = makedepend
 MKDEP_OPTIONS = -fdepend
 MAKE = make
-INSTALL = $(SHELL) $(TOP)/bin/minstall
+INSTALL = $(TOP)/bin/minstall
 
-# Tools for regenerating glapi (generally only needed by the developers)
+# Python and flags (generally only needed by the developers)
 PYTHON2 = python
 PYTHON_FLAGS = -t -O -O
-INDENT = indent
-INDENT_FLAGS = -i4 -nut -br -brs -npcs -ce -T GLubyte -T GLbyte -T Bool
 
 # Library names (base name)
 GL_LIB = GL
@@ -54,12 +48,6 @@ GLUT_LIB_NAME = lib$(GLUT_LIB).so
 GLW_LIB_NAME = lib$(GLW_LIB).so
 OSMESA_LIB_NAME = lib$(OSMESA_LIB).so
 
-# globs used to install the lib and all symlinks
-GL_LIB_GLOB = $(GL_LIB_NAME)*
-GLU_LIB_GLOB = $(GLU_LIB_NAME)*
-GLUT_LIB_GLOB = $(GLUT_LIB_NAME)*
-GLW_LIB_GLOB = $(GLW_LIB_NAME)*
-OSMESA_LIB_GLOB = $(OSMESA_LIB_NAME)*
 
 # Optional assembly language optimization files for libGL
 ASM_SOURCES = 
@@ -67,7 +55,6 @@ ASM_SOURCES =
 # GLw widget sources (Append "GLwMDrawA.c" here and add -lXm to GLW_LIB_DEPS in
 # order to build the Motif widget too)
 GLW_SOURCES = GLwDrawA.c
-MOTIF_CFLAGS = -I/usr/include/Motif1.2
 
 
 # Directories to build
@@ -79,41 +66,21 @@ DRIVER_DIRS = x11 osmesa
 PROGRAM_DIRS = demos redbook samples glsl xdemos
 
 
-# Library dependencies
+# Library/program dependencies
 #EXTRA_LIB_PATH ?=
 GL_LIB_DEPS = $(EXTRA_LIB_PATH) -lX11 -lXext -lm -lpthread
 OSMESA_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB)
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lm
-GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) $(EXTRA_LIB_PATH) -lX11 -lXmu -lXi -lm
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) $(EXTRA_LIB_PATH) -lX11 -lXmu -lXt -lXi -lm
 GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) $(EXTRA_LIB_PATH) -lXt -lX11
+APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm
 
-# Program dependencies - specific GL/glut libraries added in Makefiles
-APP_LIB_DEPS = -lm
 
 
 # Installation directories (for make install)
 INSTALL_DIR = /usr/local
-INSTALL_LIB_DIR = $(INSTALL_DIR)/$(LIB_DIR)
-INSTALL_INC_DIR = $(INSTALL_DIR)/include
-DRI_DRIVER_INSTALL_DIR = $(INSTALL_LIB_DIR)/dri
+DRI_DRIVER_INSTALL_DIR = /usr/X11R6/lib/modules/dri
 
 # Where libGL will look for DRI hardware drivers
 DRI_DRIVER_SEARCH_DIR = $(DRI_DRIVER_INSTALL_DIR)
 
-# pkg-config substitutions
-GL_PC_REQ_PRIV =
-GL_PC_LIB_PRIV =
-GL_PC_CFLAGS =
-DRI_PC_REQ_PRIV =
-GLU_PC_REQ = gl
-GLU_PC_REQ_PRIV =
-GLU_PC_LIB_PRIV =
-GLU_PC_CFLAGS =
-GLUT_PC_REQ_PRIV =
-GLUT_PC_LIB_PRIV =
-GLUT_PC_CFLAGS =
-GLW_PC_REQ_PRIV =
-GLW_PC_LIB_PRIV =
-GLW_PC_CFLAGS =
-OSMESA_PC_REQ =
-OSMESA_PC_LIB_PRIV =

configs/freebsd

@@ -13,9 +13,9 @@ OPT_FLAGS  = -O2
 PIC_FLAGS  = -fPIC
 
 DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_BSD_SOURCE -DUSE_XSHM \
-	-DHZ=100
+	-DHZ=100 -DHAVE_POSIX_MEMALIGN
 
-X11_INCLUDES = -I/usr/local/include
+X11_INCLUDES = -I/usr/X11R6/include
 
 CFLAGS += $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(DEFINES) $(X11_INCLUDES) -ffast-math -pedantic
 
@@ -23,9 +23,5 @@ CXXFLAGS += $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(DEFINES) $(X11_INCLUDES)
 
 GLUT_CFLAGS = -fexceptions
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
-EXTRA_LIB_PATH = -L/usr/local/lib
+EXTRA_LIB_PATH = -L/usr/X11R6/lib
 APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) $(EXTRA_LIB_PATH) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lXext -lXmu -lXi -lX11 -lm

configs/freebsd-dri

@@ -9,34 +9,30 @@ CONFIG_NAME = freebsd-dri
 CC = gcc
 CXX = g++
 WARN_FLAGS = -Wall
-OPT_FLAGS = -O -g
+OPT_FLAGS = -O
 
 EXPAT_INCLUDES = -I/usr/local/include
-X11_INCLUDES = -I/usr/local/include
+X11_INCLUDES = -I/usr/X11R6/include
 DEFINES = -DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 -DIN_DRI_DRIVER \
 	-DGLX_DIRECT_RENDERING -DGLX_INDIRECT_RENDERING \
-	-DHAVE_ALIAS
+	-DHAVE_ALIAS -DHAVE_POSIX_MEMALIGN
 
 CFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) -Wmissing-prototypes -std=c99 -Wundef -ffast-math \
 	$(ASM_FLAGS) $(X11_INCLUDES) $(DEFINES)
 
 CXXFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(DEFINES) -Wall -ansi -pedantic $(ASM_FLAGS) $(X11_INCLUDES) 
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 ASM_SOURCES = 
 
 # Library/program dependencies
 LIBDRM_CFLAGS = `pkg-config --cflags libdrm`
 LIBDRM_LIB = `pkg-config --libs libdrm`
 DRI_LIB_DEPS = -L/usr/local/lib -lm -pthread -lexpat $(LIBDRM_LIB)
-GL_LIB_DEPS = -L/usr/local/lib -lX11 -lXext -lXxf86vm -lXdamage -lXfixes \
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lXxf86vm -lXdamage -lXfixes \
 	-lm -pthread $(LIBDRM_LIB)
 
-GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/local/lib -lGLU -lGL -lX11 -lXmu -lXt -lXi -lm
-GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/local/lib -lGL -lXt -lX11
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/X11R6/lib -lGLU -lGL -lX11 -lXmu -lXt -lXi -lm
+GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/X11R6/lib -lGL -lXt -lX11
 
 
 # Directories

configs/hpux10-gcc

@@ -12,9 +12,5 @@ CFLAGS = -ansi -O3 -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/incl
 CXXFLAGS = -ansi -O3 -D_HPUX_SOURCE
 GLUT_CFLAGS = -fexceptions
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/lib/X11R6 -L/usr/contrib/X11R6/lib -lXext -lXmu -lXi -lX11 -lm
 

configs/linux

@@ -28,10 +28,6 @@ CFLAGS = -Wall -Wmissing-prototypes $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) \
 CXXFLAGS = -Wall $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \
 	$(X11_INCLUDES) 
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 GLUT_CFLAGS = -fexceptions
 
 EXTRA_LIB_PATH = -L/usr/X11R6/lib

configs/linux-alpha

@@ -11,10 +11,6 @@ CFLAGS = -O3 -mcpu=ev5 -ansi -mieee -pedantic -fPIC -D_XOPEN_SOURCE -DUSE_XSHM
 CXXFLAGS = -O3 -mcpu=ev5 -ansi -mieee -pedantic -fPIC -D_XOPEN_SOURCE
 GLUT_CFLAGS = -fexceptions
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread
 GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
 GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -L/usr/X11R6/lib -lXt -lX11

configs/linux-alpha-static

@@ -11,11 +11,7 @@ CFLAGS = -O3 -mcpu=ev5 -ansi -mieee -pedantic -D_XOPEN_SOURCE -DUSE_XSHM
 CXXFLAGS = -O3 -mcpu=ev5 -ansi -mieee -pedantic -D_XOPEN_SOURCE
 GLUT_CFLAGS = -fexceptions
 MKLIB_OPTIONS = -static
-PIC_FLAGS =
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
 
 # Library names (actual file names)
 GL_LIB_NAME = libGL.a

configs/linux-directfb

@@ -13,10 +13,6 @@ CFLAGS   = -Wall -O3 -ffast-math -fPIC -std=c99 -D_GNU_SOURCE -D_POSIX_SOURCE -D
 
 CXXFLAGS = -Wall -O3 -fPIC -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE   
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 HAVE_X86 = $(shell uname -m | grep 'i[3-6]86' >/dev/null && echo yes)
 ifeq ($(HAVE_X86), yes)
      CFLAGS   += -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM

configs/linux-dri

@@ -32,11 +32,6 @@ CFLAGS = -Wall -Wmissing-prototypes -std=c99 -ffast-math \
 
 CXXFLAGS = -Wall $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
 
-GLUT_CFLAGS = -fexceptions
-
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
 
 ASM_SOURCES = 
 
@@ -47,7 +42,8 @@ LIBDRM_CFLAGS = `pkg-config --cflags libdrm`
 LIBDRM_LIB = `pkg-config --libs libdrm`
 DRI_LIB_DEPS  = $(EXTRA_LIB_PATH) -lm -lpthread -lexpat -ldl $(LIBDRM_LIB)
 GL_LIB_DEPS   = $(EXTRA_LIB_PATH) -lX11 -lXext -lXxf86vm -lXdamage -lXfixes \
-		-lm -lpthread -ldl $(LIBDRM_LIB)
+		-lm -lpthread -ldl \
+                $(LIBDRM_LIB)
 
 
 # This is now 0 by default since it seems to confuse the hell out of people
@@ -59,10 +55,10 @@ USING_EGL=0
 # Directories
 ifeq ($(USING_EGL), 1)
 SRC_DIRS = egl glx/x11 mesa glu glut/glx glw
-PROGRAM_DIRS = egl xdemos
+PROGRAM_DIRS = egl
 else
 SRC_DIRS = glx/x11 mesa glu glut/glx glw
-PROGRAM_DIRS = xdemos
+PROGRAM_DIRS =
 endif
 
 DRIVER_DIRS = dri
@@ -70,5 +66,5 @@ WINDOW_SYSTEM=dri
 
 # gamma are missing because they have not been converted to use the new
 # interface.
-DRI_DIRS = i810 i915 i965 mach64 mga r128 r200 r300 radeon s3v \
+DRI_DIRS = i810 i915tex i915 i965 mach64 mga r128 r200 r300 radeon s3v \
 	savage sis tdfx trident unichrome ffb

configs/linux-dri-x86

@@ -5,6 +5,9 @@ include $(TOP)/configs/linux-dri
 
 CONFIG_NAME = linux-dri-x86
 
+# Unnecessary on x86, generally.
+PIC_FLAGS = 
+
 # Add -m32 to CFLAGS:
 ARCH_FLAGS = -m32
 

configs/linux-dri-x86-64

@@ -20,5 +20,5 @@ EXTRA_LIB_PATH=-L/usr/X11R6/lib64
 # the new interface.  i810 are missing because there is no x86-64
 # system where they could *ever* be used.
 #
-DRI_DIRS = i915 i965 mach64 mga r128 r200 r300 radeon savage tdfx unichrome
+DRI_DIRS = i915tex i915 i965 mach64 mga r128 r200 radeon tdfx unichrome savage r300
 

configs/linux-dri-xcb

@@ -32,9 +32,6 @@ CFLAGS = -Wall -Wmissing-prototypes $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) \
 
 CXXFLAGS = -Wall $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
 
 ASM_SOURCES = 
 
@@ -44,9 +41,8 @@ EXTRA_LIB_PATH=`pkg-config --libs-only-L x11`
 LIBDRM_CFLAGS = `pkg-config --cflags libdrm`
 LIBDRM_LIB = `pkg-config --libs libdrm`
 DRI_LIB_DEPS  = $(EXTRA_LIB_PATH) -lm -lpthread -lexpat -ldl $(LIBDRM_LIB)
-GL_LIB_DEPS   = $(EXTRA_LIB_PATH) -lX11 -lXext -lXxf86vm -lXdamage -lXfixes \
-		-lm -lpthread -ldl $(LIBDRM_LIB) `pkg-config --libs xcb` \
-		`pkg-config --libs x11-xcb` `pkg-config --libs xcb-glx`
+GL_LIB_DEPS   = $(EXTRA_LIB_PATH) -lX11 -lXext -lXxf86vm -lm -lpthread -ldl \
+                $(LIBDRM_LIB) `pkg-config --libs xcb` `pkg-config --libs x11-xcb` `pkg-config --libs xcb-glx`
 
 
 # This is now 0 by default since it seems to confuse the hell out of people
@@ -58,10 +54,10 @@ USING_EGL=0
 # Directories
 ifeq ($(USING_EGL), 1)
 SRC_DIRS = egl glx/x11 mesa glu glut/glx glw
-PROGRAM_DIRS = egl xdemos
+PROGRAM_DIRS = egl
 else
 SRC_DIRS = glx/x11 mesa glu glut/glx glw
-PROGRAM_DIRS = xdemos
+PROGRAM_DIRS =
 endif
 
 DRIVER_DIRS = dri
@@ -70,4 +66,4 @@ WINDOW_SYSTEM=dri
 # gamma are missing because they have not been converted to use the new
 # interface.
 DRI_DIRS = i810 i915 mach64 mga r128 r200 r300 radeon s3v \
-	savage sis tdfx trident unichrome ffb 
+	savage sis tdfx trident unichrome ffb nouveau

configs/linux-fbdev

@@ -6,9 +6,6 @@ CONFIG_NAME = linux-fbdev
 
 CFLAGS = -O3 -ffast-math -ansi -pedantic -fPIC -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DPTHREADS -DUSE_GLFBDEV_DRIVER
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-
 SRC_DIRS = mesa glu glut/fbdev
 DRIVER_DIRS = fbdev osmesa
 PROGRAM_DIRS = fbdev demos redbook samples

configs/linux-glide

@@ -12,9 +12,6 @@ CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE
 CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
 GLUT_CFLAGS = -fexceptions
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
 
 # Library/program dependencies
 GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -L/usr/local/glide/lib -lglide3x -lm -lpthread

configs/linux-indirect

@@ -33,9 +33,6 @@ CFLAGS   = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \
 
 CXXFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
 
 ASM_SOURCES = 
 

configs/linux-osmesa

@@ -12,9 +12,6 @@ CXX = g++
 CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DPTHREADS
 CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
 
 # Directories
 SRC_DIRS = mesa glu
@@ -25,4 +22,4 @@ PROGRAM_DIRS = osdemos
 # Dependencies
 OSMESA_LIB_DEPS = -lm -lpthread
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
-APP_LIB_DEPS = -lm -lpthread
+APP_LIB_DEPS = -lOSMesa -lGLU

configs/linux-osmesa16

@@ -10,9 +10,6 @@ CXX = g++
 CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS -I/usr/X11R6/include -DCHAN_BITS=16 -DDEFAULT_SOFTWARE_DEPTH_BITS=31
 CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
 
 # Library names
 OSMESA_LIB = OSMesa16
@@ -28,4 +25,4 @@ PROGRAM_DIRS =
 # Dependencies
 OSMESA_LIB_DEPS = -lm -lpthread
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
-APP_LIB_DEPS = -lm -lpthread
+APP_LIB_DEPS = -lOSMesa16

configs/linux-osmesa16-static

@@ -10,11 +10,7 @@ CXX = g++
 CFLAGS = -O3 -ansi -pedantic -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS -I/usr/X11R6/include -DCHAN_BITS=16 -DDEFAULT_SOFTWARE_DEPTH_BITS=31
 CXXFLAGS = -O3 -ansi -pedantic -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
 MKLIB_OPTIONS = -static
-PIC_FLAGS =
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
 
 # Library names
 OSMESA_LIB = OSMesa16
@@ -29,4 +25,4 @@ PROGRAM_DIRS =
 
 # Dependencies
 OSMESA_LIB_DEPS = -lm -lpthread
-APP_LIB_DEPS = -lm -lpthread
+APP_LIB_DEPS = -lOSMesa16

configs/linux-osmesa32

@@ -10,9 +10,6 @@ CXX = g++
 CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS -I/usr/X11R6/include -DCHAN_BITS=32 -DDEFAULT_SOFTWARE_DEPTH_BITS=31
 CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
 
 # Library names
 OSMESA_LIB = OSMesa32
@@ -28,4 +25,4 @@ PROGRAM_DIRS =
 # Dependencies
 OSMESA_LIB_DEPS = -lm -lpthread
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
-APP_LIB_DEPS = -lm -lpthread
+APP_LIB_DEPS = -lOSMesa32

configs/linux-ppc-static

@@ -5,7 +5,6 @@ include $(TOP)/configs/linux-ppc
 CONFIG_NAME = linux-ppc-static
 
 MKLIB_OPTIONS = -static
-PIC_FLAGS =
 
 # Library names (actual file names)
 GL_LIB_NAME = libGL.a

configs/linux-solo

@@ -24,17 +24,13 @@ PCIACCESS_LIB = `pkg-config --libs pciaccess`
 
 DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
 	-D_BSD_SOURCE -D_GNU_SOURCE -DHAVE_POSIX_MEMALIGN \
-	-DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 -DIN_DRI_DRIVER \
-	-DHAVE_ALIAS
+	-DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 -DDRM_USE_MALLOC -DIN_DRI_DRIVER
 
 CFLAGS   = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \
 	$(ASM_FLAGS) -std=c99 -ffast-math 
 
 CXXFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
 
 ASM_SOURCES = 
 

configs/linux-solo-x86

@@ -5,6 +5,9 @@ include $(TOP)/configs/linux-solo
 
 CONFIG_NAME = linux-solo-x86
 
+# Unnecessary on x86, generally.
+PIC_FLAGS = 
+
 ASM_FLAGS = -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM
 ASM_SOURCES = $(X86_SOURCES)
 ASM_API = $(X86_API)

configs/linux-static

@@ -5,7 +5,6 @@ include $(TOP)/configs/linux
 CONFIG_NAME = linux-static
 
 MKLIB_OPTIONS = -static
-PIC_FLAGS =
 
 # Library names (actual file names)
 GL_LIB_NAME = libGL.a
@@ -22,5 +21,6 @@ GLUT_LIB_DEPS =
 GLW_LIB_DEPS = 
 
 # Need to specify all libraries we may need
-APP_LIB_DEPS = $(EXTRA_LIB_PATH) -lX11 -lXext -lXmu -lXt -lXi -lpthread \
-	-lstdc++ -lm
+APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm \
+	-L/usr/X11R6/lib/ -lX11 -lXmu -lXi -lpthread
+

configs/linux-x86-64-static

@@ -5,7 +5,6 @@ include $(TOP)/configs/linux-x86-64
 CONFIG_NAME = linux-x86-64-static
 
 MKLIB_OPTIONS = -static
-PIC_FLAGS =
 
 # Library names (actual file names)
 GL_LIB_NAME = libGL.a
@@ -20,5 +19,5 @@ OSMESA_LIB_DEPS =
 GLU_LIB_DEPS = 
 GLUT_LIB_DEPS = 
 GLW_LIB_DEPS = 
-APP_LIB_DEPS = $(EXTRA_LIB_PATH) -lX11 -lXext -lXmu -lXt -lXi -lpthread \
-	-lstdc++ -lm
+APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) \
+               $(EXTRA_LIB_PATH) -lX11 -lXmu -lXt -lXi -lpthread -lstdc++ -lm

configs/linux-x86-glide

@@ -14,9 +14,6 @@ CXXFLAGS = -Wall -O3 -ansi -pedantic -fPIC -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199
 
 GLUT_CFLAGS = -fexceptions
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
 
 ASM_SOURCES = $(X86_SOURCES)
 ASM_API = $(X86_API)

configs/linux-x86-static

@@ -5,7 +5,6 @@ include $(TOP)/configs/linux-x86
 CONFIG_NAME = linux-x86-static
 
 MKLIB_OPTIONS = -static
-PIC_FLAGS =
 
 # Library names (actual file names)
 GL_LIB_NAME = libGL.a
@@ -20,5 +19,5 @@ OSMESA_LIB_DEPS =
 GLU_LIB_DEPS = 
 GLUT_LIB_DEPS = 
 GLW_LIB_DEPS = 
-APP_LIB_DEPS = $(EXTRA_LIB_PATH) -lX11 -lXext -lXmu -lXt -lXi -lpthread \
-	-lstdc++ -lm
+APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) \
+               $(EXTRA_LIB_PATH) -lX11 -lXmu -lXt -lXi -lpthread -lstdc++ -lm

configs/netbsd

@@ -12,6 +12,3 @@ CXXFLAGS = -O2 -fPIC
 GLUT_CFLAGS = -fexceptions
 APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/X11R6/lib -lXext -lXmu -lXi -lX11 -lm
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing

configs/openbsd

@@ -10,10 +10,6 @@ CXX = g++
 CFLAGS = -O2 -fPIC -I/usr/X11R6/include -DUSE_XSHM -DHZ=100
 CXXFLAGS = -O2 -fPIC -I/usr/X11R6/include -DHZ=100
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm
 OSMESA_LIB_DEPS = -lm
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB)

configs/solaris-x86-gcc

@@ -11,10 +11,6 @@ CFLAGS = -O3 -march=i486 -fPIC -I/usr/openwin/include -DUSE_XSHM
 CXXFLAGS = -O3 -march=i486 -fPIC
 GLUT_CFLAGS = -fexceptions
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 GL_LIB_DEPS = -L/usr/openwin/lib -lX11 -lXext -lm -lpthread
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lm
 GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/openwin/lib -lX11 -lXmu -lXt -lXi -lm

configs/solaris-x86-gcc-static

@@ -12,10 +12,6 @@ CXXFLAGS = -O3 -march=i486 -fPIC
 GLUT_CFLAGS = -fexceptions
 MKLIB_OPTIONS = -static
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 GL_LIB_DEPS = -L/usr/openwin/lib -lX11 -lXext -lm -lpthread
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lm
 GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/openwin/lib -lX11 -lXmu -lXt -lXi -lm

configs/sunos4-gcc

@@ -11,9 +11,5 @@ CFLAGS = -fPIC -O3 -I/usr/openwin/include -I/usr/include/X11R5 -I/usr/include/X1
 CXXFLAGS = -fPIC -O3 -I/usr/openwin/include -DSUNOS4
 GLUT_CFLAGS = -fexceptions -DSOLARIS_2_4_BUG
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/openwin/lib -lX11 -lXext -lXmu -lXi -lm
 

configs/sunos5-gcc

@@ -28,10 +28,6 @@ CXXFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \
 
 GLUT_CFLAGS = -fexceptions -DSOLARIS_2_4_BUG
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 # Library/program dependencies
 EXTRA_LIB_PATH=-L/usr/openwin/lib
 

configs/sunos5-v9-cc-g++

@@ -1,35 +0,0 @@
-# Configuration for SunOS 5, SPARC V9 and cc/g++ (for C and C++ sources)
-
-include $(TOP)/configs/default
-
-CONFIG_NAME = sunos5-v9-cc-g++
-
-MKLIB_OPTIONS = -cplusplus
-
-LIB_DIR = lib64
-
-# Compiler and flags
-CC = cc
-CXX = g++
-
-CXX_WARN_FLAGS = -Wall
-CXX_PIC_FLAGS  = -fPIC
-CXX_OPT_FLAGS  = -O3 -m64 -mcpu=ultrasparc -mv8plus -mvis -g -fomit-frame-pointer -pipe
-CXX_ARCH_FLAGS = -m64
-
-
-CXXFLAGS = $(CXX_WARN_FLAGS) $(CXX_OPT_FLAGS) $(CXX_PIC_FLAGS) $(CXX_ARCH_FLAGS) $(DEFINES) \
-        -I/usr/openwin/include
-
-# Work around aliasing bugs - developers should comment this out
-CXXFLAGS += -fno-strict-aliasing
-
-CFLAGS = -xarch=v9 -KPIC -O -I/usr/openwin/include -I/usr/dt/include -DUSE_XSHM -DPTHREADS
-#CXXFLAGS = -xarch=v9 -KPIC -O -I/usr/openwin/include -I/usr/dt/include -DPTHREADS
-GLUT_CFLAGS = -DSOLARIS_2_4_BUG
-
-GL_LIB_DEPS = -L/usr/openwin/lib -L/usr/dt/lib -lX11 -lXext -lXmu -lXi -lm -lpthread
-GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lm -lCstd -lCrun
-GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -lm
-GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -L/usr/openwin/lib -lXt -lX11
-APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -lX11 -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm

configs/ultrix-gcc

@@ -12,10 +12,6 @@ CXXFLAGS = -pedantic -O2
 GLUT_CFLAGS = -fexceptions
 MKLIB_OPTIONS = -static
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 GL_LIB_NAME = libGL.a
 GLU_LIB_NAME = libGLU.a
 GLUT_LIB_NAME = libglut.a

docs/MESA_copy_sub_buffer.spec

@@ -16,7 +16,7 @@ Status
 
 Version
 
-    Last Modified Date:  12 January 2009
+    Last Modified Date:  8 June 2000
 
 Number
 
@@ -69,12 +69,6 @@ Additions to Chapter 3 of the GLX 1.3 Specification (Functions and Errors)
     <width> and <height> indicate the size in pixels.  Coordinate (0,0)
     corresponds to the lower-left pixel of the window, like glReadPixels.
 
-    If dpy and drawable are the display and drawable for the calling
-    thread's current context, glXCopySubBufferMESA performs an
-    implicit glFlush before it returns.  Subsequent OpenGL commands
-    may be issued immediately after calling glXCopySubBufferMESA, but
-    are not executed until the copy is completed. 
-
 GLX Protocol
 
     None at this time.  The extension is implemented in terms of ordinary
@@ -90,7 +84,5 @@ New State
 
 Revision History
 
-    12 January 2009 Ian Romanick - Added language about implicit flush
-                                   and command completion.
-    8 June 2000     Brian Paul   - initial specification
+    8 June 2000 - initial specification
 

docs/MESA_packed_depth_stencil.spec

@@ -17,6 +17,7 @@ Status
 
 Version
 
+    $Id: MESA_packed_depth_stencil.spec,v 1.2 2003/09/19 14:58:21 brianp Exp $
 
 Number
 

docs/MESA_program_debug.spec

@@ -18,6 +18,7 @@ Version
 
     Last Modified Date: July 20, 2003
     Author Revision: 1.0
+    $Date: 2004/03/25 01:42:41 $ $Revision: 1.4 $
 
 Number
 

docs/MESA_resize_buffers.spec

@@ -16,6 +16,7 @@ Status
 
 Version
 
+    $Id: MESA_resize_buffers.spec,v 1.3 2004/03/25 01:42:42 brianp Exp $
 
 Number
 

docs/MESA_shader_debug.spec

@@ -19,6 +19,7 @@ Version
 
     Last Modified Date: July 30, 2006
     Author Revision: 0.2
+    $Date: 2006/07/30 14:28:38 $ $Revision: 1.2 $
 
 Number
 

docs/MESA_sprite_point.spec

@@ -16,6 +16,7 @@ Status
 
 Version
 
+    $Id: MESA_sprite_point.spec,v 1.2 2003/09/19 14:58:21 brianp Exp $
 
 Number
 

docs/MESA_texture_array.spec

@@ -1,804 +0,0 @@
-Name
-
-    MESA_texture_array
-
-Name Strings
-
-    GL_MESA_texture_array
-
-Contact
-
-    Ian Romanick, IBM (idr 'at' us.ibm.com)
-
-IP Status
-
-    No known IP issues.
-
-Status
-
-    Shipping in Mesa 7.1
-
-Version
-
-
-Number
-
-    TBD
-
-Dependencies
-
-    OpenGL 1.2 or GL_EXT_texture3D is required.
-
-    Support for ARB_fragment_program is assumed, but not required.
-
-    Support for ARB_fragment_program_shadow is assumed, but not required.
-
-    Support for EXT_framebuffer_object is assumed, but not required.
-
-    Written based on the wording of the OpenGL 2.0 specification and
-    ARB_fragment_program_shadow but not dependent on them.
-
-Overview
-
-    There are a number of circumstances where an application may wish to
-    blend two textures out of a larger set of textures.  Moreover, in some
-    cases the selected textures may vary on a per-fragment basis within
-    a polygon.  Several examples include:
-
-       1. High dynamic range textures.  The application stores several
-       different "exposures" of an image as different textures.  On a
-       per-fragment basis, the application selects which exposures are
-       used.
-
-       2. A terrain engine where the altitude of a point determines the
-       texture applied to it.  If the transition is from beach sand to
-       grass to rocks to snow, the application will store each texture
-       in a different texture map, and dynamically select which two
-       textures to blend at run-time.
-
-       3. Storing short video clips in textures.  Each depth slice is a
-       single frame of video.
-
-    Several solutions to this problem have been proposed, but they either
-    involve using a separate texture unit for each texture map or using 3D
-    textures without mipmaps.  Both of these options have major drawbacks.
-
-    This extension provides a third alternative that eliminates the major
-    drawbacks of both previous methods.  A new texture target,
-    TEXTURE_2D_ARRAY, is added that functions identically to TEXTURE_3D in
-    all aspects except the sizes of the non-base level images.  In
-    traditional 3D texturing, the size of the N+1 LOD is half the size
-    of the N LOD in all three dimensions.  For the TEXTURE_2D_ARRAY target,
-    the height and width of the N+1 LOD is halved, but the depth is the
-    same for all levels of detail. The texture then becomes an array of
-    2D textures.  The per-fragment texel is selected by the R texture
-    coordinate.
-
-    References:
-
-        http://www.opengl.org/discussion_boards/cgi_directory/ultimatebb.cgi?ubb=get_topic;f=3;t=011557
-        http://www.opengl.org/discussion_boards/cgi_directory/ultimatebb.cgi?ubb=get_topic;f=3;t=000516
-        http://www.opengl.org/discussion_boards/cgi_directory/ultimatebb.cgi?ubb=get_topic;f=3;t=011903
-        http://www.delphi3d.net/articles/viewarticle.php?article=terraintex.htm
-
-New Procedures and Functions
-
-    All functions come directly from EXT_texture_array.
-
-    void FramebufferTextureLayerEXT(enum target, enum attachment,
-                                    uint texture, int level, int layer);
-
-New Tokens
-
-    All token names and values come directly from EXT_texture_array.
-
-    Accepted by the <cap> parameter of Enable, Disable, and IsEnabled, by
-    the <pname> parameter of GetBooleanv, GetIntegerv, GetFloatv, and
-    GetDoublev, and by the <target> parameter of TexImage3D, GetTexImage,
-    GetTexLevelParameteriv, GetTexLevelParameterfv, GetTexParameteriv, and
-    GetTexParameterfv:
-
-        TEXTURE_1D_ARRAY_EXT                            0x8C18
-        TEXTURE_2D_ARRAY_EXT                            0x8C1A
-
-    Accepted by the <target> parameter of TexImage2D, TexSubImage2D,
-    CopyTexImage2D, CopyTexSubImage2D, CompressedTexImage2D,
-    CompressedTexSubImage2D, GetTexLevelParameteriv, and 
-    GetTexLevelParameterfv:
-
-        TEXTURE_1D_ARRAY_EXT
-        PROXY_TEXTURE_1D_ARRAY_EXT                      0x8C19
-
-    Accepted by the <target> parameter of TexImage3D, TexSubImage3D,
-    CopyTexSubImage3D, CompressedTexImage3D, CompressedTexSubImage3D,
-    GetTexLevelParameteriv, and GetTexLevelParameterfv:
-
-        TEXTURE_2D_ARRAY_EXT
-        PROXY_TEXTURE_2D_ARRAY_EXT                      0x8C1B
-
-    Accepted by the <pname> parameter of GetBooleanv, GetIntegerv,
-    GetFloatv, and GetDoublev
-
-        TEXTURE_BINDING_1D_ARRAY_EXT                    0x8C1C
-        TEXTURE_BINDING_2D_ARRAY_EXT                    0x8C1D
-        MAX_ARRAY_TEXTURE_LAYERS_EXT                    0x88FF
-
-    Accepted by the <param> parameter of TexParameterf, TexParameteri,
-    TexParameterfv, and TexParameteriv when the <pname> parameter is
-    TEXTURE_COMPARE_MODE_ARB:
-
-        COMPARE_REF_DEPTH_TO_TEXTURE_EXT                0x884E
-
-    (Note:  COMPARE_REF_DEPTH_TO_TEXTURE_EXT is simply an alias for the
-    existing COMPARE_R_TO_TEXTURE token in OpenGL 2.0; the alternate name
-    reflects the fact that the R coordinate is not always used.)
-
-    Accepted by the <internalformat> parameter of TexImage3D and
-    CompressedTexImage3D, and by the <format> parameter of
-    CompressedTexSubImage3D:
-
-        COMPRESSED_RGB_S3TC_DXT1_EXT
-        COMPRESSED_RGBA_S3TC_DXT1_EXT
-        COMPRESSED_RGBA_S3TC_DXT3_EXT
-        COMPRESSED_RGBA_S3TC_DXT5_EXT
-
-    Accepted by the <pname> parameter of
-    GetFramebufferAttachmentParameterivEXT:
-
-        FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER_EXT          0x8CD4
-
-    (Note:  FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER is simply an alias for the
-    FRAMEBUFFER_ATTACHMENT_TEXTURE_3D_ZOFFSET_EXT token provided in
-    EXT_framebuffer_object.  This extension generalizes the notion of
-    "<zoffset>" to include layers of an array texture.)
-
-Additions to Chapter 2 of the OpenGL 2.0 Specification (OpenGL Operation)
-
-    None
-
-Additions to Chapter 3 of the OpenGL 2.0 Specification (Rasterization)
-
-    -- Section 3.8.1 "Texture Image Specification"
-
-       Change the first paragraph (page 150) to say (spec changes identical to
-       EXT_texture_array):
-
-       "The command
-
-         void TexImage3D(enum target, int level, int internalformat,
-                         sizei width, sizei height, sizei depth, int border,
-                         enum format, enum type, void *data);
-
-       is used to specify a three-dimensional texture image. target must be one
-       one of TEXTURE_3D for a three-dimensional texture or
-       TEXTURE_2D_ARRAY_EXT for an two-dimensional array texture.
-       Additionally, target may be either PROXY_TEXTURE_3D for a
-       three-dimensional proxy texture, or PROXY_TEXTURE_2D_ARRAY_EXT for a
-       two-dimensional proxy array texture."
-
-       Change the fourth paragraph on page 151 to say (spec changes identical
-       to EXT_texture_array):
-
-       "Textures with a base internal format of DEPTH_COMPONENT are supported
-       by texture image specification commands only if target is TEXTURE_1D,
-       TEXTURE_2D, TEXTURE_1D_ARRAY_EXT, TEXTURE_2D_ARRAY_EXT,
-       PROXY_TEXTURE_1D, PROXY_TEXTURE_2D, PROXY_TEXTURE_1D_ARRAY_EXT, or
-       PROXY_TEXTURE_2D_ARRAY_EXT. Using this format in conjunction with any
-       other target will result in an INVALID_OPERATION error."
-
-
-       Change the fourth paragraph on page 156 to say (spec changes identical
-       to EXT_texture_array):
-       
-       "The command
-
-         void TexImage2D(enum target, int level,
-                         int internalformat, sizei width, sizei height,
-                         int border, enum format, enum type, void *data);
-
-       is used to specify a two-dimensional texture image. target must be one
-       of TEXTURE_2D for a two-dimensional texture, TEXTURE_1D_ARRAY_EXT for a
-       one-dimensional array texture, or one of TEXTURE_CUBE_MAP_POSITIVE_X,
-       TEXTURE_CUBE_MAP_NEGATIVE_X, TEXTURE_CUBE_MAP_POSITIVE_Y,
-       TEXTURE_CUBE_MAP_NEGATIVE_Y, TEXTURE_CUBE_MAP_POSITIVE_Z, or
-       TEXTURE_CUBE_MAP_NEGATIVE_Z for a cube map texture. Additionally,
-       target may be either PROXY_TEXTURE_2D for a two-dimensional proxy
-       texture, PROXY_TEXTURE_1D_ARRAY_EXT for a one-dimensional proxy array
-       texture, or PROXY TEXTURE_CUBE_MAP for a cube map proxy texture in the
-       special case discussed in section 3.8.11.  The other parameters match
-       the corresponding parameters of TexImage3D.
-
-       For the purposes of decoding the texture image, TexImage2D is
-       equivalent to calling TexImage3D with corresponding arguments and depth
-       of 1, except that
-
-         * The border depth, d_b, is zero, and the depth of the image is
-           always 1 regardless of the value of border. 
-
-         * The border height, h_b, is zero if <target> is
-           TEXTURE_1D_ARRAY_EXT, and <border> otherwise.
-
-         * Convolution will be performed on the image (possibly changing its
-           width and height) if SEPARABLE 2D or CONVOLUTION 2D is enabled.
-
-         * UNPACK SKIP IMAGES is ignored."
-
-    -- Section 3.8.2 "Alternate Texture Image Specification Commands"
-
-       Change the second paragraph (page 159) (spec changes identical
-       to EXT_texture_array):
-
-       "The command
-
-         void CopyTexImage2D(enum target, int level,
-                             enum internalformat, int x, int y, sizei width,
-                             sizei height, int border);
-
-       defines a two-dimensional texture image in exactly the manner of
-       TexImage2D, except that the image data are taken from the framebuffer
-       rather than from client memory. Currently, target must be one of
-       TEXTURE_2D, TEXTURE_1D_ARRAY_EXT, TEXTURE_CUBE_MAP_POSITIVE_X,
-       TEXTURE_CUBE_MAP_NEGATIVE_X, TEXTURE_CUBE MAP_POSITIVE_Y,
-       TEXTURE_CUBE_MAP_NEGATIVE_Y, TEXTURE_CUBE_MAP_POSITIVE_Z, or
-       TEXTURE_CUBE_MAP_NEGATIVE_Z.
-
-
-       Change the last paragraph on page 160 to say (spec changes identical
-       to EXT_texture_array):
-
-       "Currently the target arguments of TexSubImage1D and CopyTexSubImage1D
-       must be TEXTURE_1D, the target arguments of TexSubImage2D and
-       CopyTexSubImage2D must be one of TEXTURE_2D, TEXTURE_1D_ARRAY_EXT,
-       TEXTURE_CUBE_MAP_POSITIVE_X, TEXTURE_CUBE_MAP_NEGATIVE_X,
-       TEXTURE_CUBE_MAP_POSITIVE_Y, TEXTURE_CUBE_MAP_NEGATIVE_Y,
-       TEXTURE_CUBE_MAP_POSITIVE_Z, or TEXTURE_CUBE_MAP_NEGATIVE_Z, and the
-       target arguments of TexSubImage3D and CopyTexSubImage3D must be
-       TEXTURE_3D or TEXTURE_2D_ARRAY_EXT. ..."
-
-
-    -- Section 3.8.4 "Texture Parameters"
-
-       Change the first paragraph (page 166) to say:
-
-       "Various parameters control how the texel array is treated when
-       specified or changed, and when applied to a fragment. Each parameter is
-       set by calling
-
-         void TexParameter{if}(enum target, enum pname, T param); 
-         void TexParameter{if}v(enum target, enum pname, T params);
-
-       target is the target, either TEXTURE_1D, TEXTURE_2D, TEXTURE_3D,
-       TEXTURE_CUBE_MAP, TEXTURE_1D_ARRAY_EXT, or TEXTURE_2D_ARRAY_EXT."
-
-
-    -- Section 3.8.8 "Texture Minification" in the section "Scale Factor and Level of Detail"
-
-       Change the first paragraph (page 172) to say:
-
-       "Let s(x,y) be the function that associates an s texture coordinate
-       with each set of window coordinates (x,y) that lie within a primitive;
-       define t(x,y) and r(x,y) analogously.  Let u(x,y) = w_t * s(x,y),
-       v(x,y) = h_t * t(x,y), and w(x,y) = d_t * r(x,y), where w_t, h_t,
-       and d_t are as defined by equations 3.15, 3.16, and 3.17 with
-       w_s, h_s, and d_s equal to the width, height, and depth of the
-       image array whose level is level_base.  For a one-dimensional
-       texture or a one-dimensional array texture, define v(x,y) = 0 and
-       w(x,y) = 0; for a two-dimensional texture or a two-dimensional array
-       texture, define w(x,y) = 0..."
-
-    -- Section 3.8.8 "Texture Minification" in the section "Mipmapping"
-
-       Change the third paragraph (page 174) to say:
-       
-       "For a two-dimensional texture, two-dimensional array texture, or
-       cube map texture,"
-
-       Change the fourth paragraph (page 174) to say:
-
-       "And for a one-dimensional texture or a one-dimensional array texture,"
-
-       After the first paragraph (page 175) add:
-
-       "For one-dimensional array textures, h_b and d_b are treated as 1,
-       regardless of the actual values, when performing mipmap calculations.
-       For two-dimensional array textures, d_b is always treated as one,
-       regardless of the actual value, when performing mipmap calculations."
-
-    -- Section 3.8.8 "Automatic Mipmap Generation" in the section "Mipmapping"
-
-       Change the third paragraph (page 176) to say (spec changes identical
-       to EXT_texture_array):
-
-       "The contents of the derived arrays are computed by repeated, filtered
-       reduction of the level_base array.  For one- and two-dimensional array
-       textures, each layer is filtered independently.  ..."
-
-    -- Section 3.8.8 "Manual Mipmap Generation" in the section "Mipmapping"
-
-       Change first paragraph to say (spec changes identical to
-       EXT_texture_array):
-
-       "Mipmaps can be generated manually with the command
-
-         void GenerateMipmapEXT(enum target);
-
-       where <target> is one of TEXTURE_1D, TEXTURE_2D, TEXTURE_CUBE_MAP,
-       TEXTURE_3D, TEXTURE_1D_ARRAY, or TEXTURE_2D_ARRAY.  Mipmap generation
-       affects the texture image attached to <target>.  ..."
-
-    -- Section 3.8.10 "Texture Completeness"
-
-       Change the second paragaph (page 177) to say (spec changes identical
-       to EXT_texture_array):
-
-       "For one-, two-, or three-dimensional textures and one- or
-       two-dimensional array textures, a texture is complete if the following
-       conditions all hold true:"
-
-    -- Section 3.8.11 "Texture State and Proxy State"
-
-       Change the second and third paragraphs (page 179) to say (spec changes
-       identical to EXT_texture_array):
-
-       "In addition to image arrays for one-, two-, and three-dimensional
-       textures, one- and two-dimensional array textures, and the six image
-       arrays for the cube map texture, partially instantiated image arrays
-       are maintained for one-, two-, and three-dimensional textures and one-
-       and two-dimensional array textures.  Additionally, a single proxy image
-       array is maintained for the cube map texture.  Each proxy image array
-       includes width, height, depth, border width, and internal format state
-       values, as well as state for the red, green, blue, alpha, luminance,
-       and intensity component resolutions. Proxy image arrays do not include
-       image data, nor do they include texture properties. When TexImage3D is
-       executed with target specified as PROXY_TEXTURE_3D, the
-       three-dimensional proxy state values of the specified level-of-detail
-       are recomputed and updated. If the image array would not be supported
-       by TexImage3D called with target set to TEXTURE 3D, no error is
-       generated, but the proxy width, height, depth, border width, and
-       component resolutions are set to zero. If the image array would be
-       supported by such a call to TexImage3D, the proxy state values are set
-       exactly as though the actual image array were being specified. No pixel
-       data are transferred or processed in either case.
-
-       Proxy arrays for one- and two-dimensional textures and one- and
-       two-dimensional array textures are operated on in the same way when
-       TexImage1D is executed with target specified as PROXY_TEXTURE_1D,
-       TexImage2D is executed with target specified as PROXY_TEXTURE_2D or
-       PROXY_TEXTURE_1D_ARRAY_EXT, or TexImage3D is executed with target
-       specified as PROXY_TETXURE_2D_ARRAY_EXT."
-
-    -- Section 3.8.12 "Texture Objects"
-
-       Change section (page 180) to say (spec changes identical to 
-       EXT_texture_array):
-
-       "In addition to the default textures TEXTURE_1D, TEXTURE_2D,
-       TEXTURE_3D, TEXTURE_CUBE_MAP, TEXTURE_1D_ARRAY_EXT, and TEXTURE_2D_EXT,
-       named one-, two-, and three-dimensional, cube map, and one- and
-       two-dimensional array texture objects can be created and operated upon.
-       The name space for texture objects is the unsigned integers, with zero
-       reserved by the GL.
-
-       A texture object is created by binding an unused name to TEXTURE_1D,
-       TEXTURE_2D, TEXTURE_3D, TEXTURE_CUBE_MAP, TEXTURE_1D_ARRAY_EXT, or
-       TEXTURE_2D_ARRAY_EXT. The binding is effected by calling
-
-         void BindTexture(enum target, uint texture);
-
-       with <target> set to the desired texture target and <texture> set to
-       the unused name.  The resulting texture object is a new state vector,
-       comprising all the state values listed in section 3.8.11, set to the
-       same initial values. If the new texture object is bound to TEXTURE_1D,
-       TEXTURE_2D, TEXTURE_3D, TEXTURE_CUBE_MAP, TEXTURE_1D_ARRAY_EXT, or
-       TEXTURE_2D_ARRAY_EXT, it is and remains a one-, two-,
-       three-dimensional, cube map, one- or two-dimensional array texture
-       respectively until it is deleted.
-
-       BindTexture may also be used to bind an existing texture object to
-       either TEXTURE_1D, TEXTURE_2D, TEXTURE_3D, TEXTURE_CUBE_MAP,
-       TEXTURE_1D_ARRAY_EXT, or TEXTURE_2D_ARRAY_EXT. The error
-       INVALID_OPERATION is generated if an attempt is made to bind a texture
-       object of different dimensionality than the specified target. If the
-       bind is successful no change is made to the state of the bound texture
-       object, and any previous binding to target is broken.
-
-       While a texture object is bound, GL operations on the target to which
-       it is bound affect the bound object, and queries of the target to which
-       it is bound return state from the bound object. If texture mapping of
-       the dimensionality of the target to which a texture object is bound is
-       enabled, the state of the bound texture object directs the texturing
-       operation.
-
-       In the initial state, TEXTURE_1D, TEXTURE_2D, TEXTURE_3D,
-       TEXTURE_CUBE_MAP, TEXTURE_1D_ARRAY_EXT, and TEXTURE_2D_ARRAY_EXT have
-       one-, two-, three-dimensional, cube map, and one- and two-dimensional
-       array texture state vectors respectively associated with them. In order
-       that access to these initial textures not be lost, they are treated as
-       texture objects all of whose names are 0. The initial one-, two-,
-       three-dimensional, cube map, one- and two-dimensional array textures
-       are therefore operated upon, queried, and applied as TEXTURE_1D,
-       TEXTURE_2D, TEXTURE_3D, TEXTURE_CUBE_MAP, TEXTURE_1D_ARRAY_EXT, and
-       TEXTURE_2D_ARRAY_EXT respectively while 0 is bound to the corresponding
-       targets.
-
-       Change second paragraph on page 181 to say (spec changes identical to 
-       EXT_texture_array):
-       
-       "...  If a texture that is currently bound to one of the targets
-       TEXTURE_1D, TEXTURE_2D, TEXTURE_3D, TEXTURE_CUBE_MAP,
-       TEXTURE_1D_ARRAY_EXT, or TEXTURE_2D_ARRAY_EXT is deleted, it is as
-       though BindTexture had been executed with the same target and texture
-       zero. ..."
-
-       Change second paragraph on page 182 to say (spec changes identical to 
-       EXT_texture_array):
-       
-       "The texture object name space, including the initial one-, two-, and
-       three dimensional, cube map, and one- and two-dimensional array texture
-       objects, is shared among all texture units. ..."
-
-
-    -- Section 3.8.14 "Depth Texture Comparison Modes" in "Texture Comparison Modes"
-
-       Change second through fourth paragraphs (page 188) to say:
-
-       "Let D_t be the depth texture value, in the range [0, 1].  For
-       texture lookups from one- and two-dimesional, rectangle, and
-       one-dimensional array targets, let R be the interpolated <r>
-       texture coordinate, clamped to the range [0, 1].  For texture lookups
-       from two-dimesional array texture targets, let R be the interpolated
-       <q> texture coordinate, clamped to the range [0, 1].  Then the
-       effective texture value L_t, I_t, or A_t is computed as follows:
-
-       If the value of TEXTURE_COMPARE_MODE is NONE, then
-
-          r = Dt
-
-       If the value of TEXTURE_COMPARE_MODE is
-       COMPARE_REF_DEPTH_TO_TEXTURE_EXT), then r depends on the texture
-       comparison function as shown in table 3.27."
-
-    -- Section 3.8.15 "Texture Application"
-
-       Change the first paragraph (page 189) to say:
-
-       "Texturing is enabled or disabled using the generic Enable and Disable
-       commands, respectively, with the symbolic constants TEXTURE_1D,
-       TEXTURE_2D, TEXTURE_3D, TEXTURE_CUBE_MAP, TEXTURE_1D_ARRAY_EXT, or
-       TEXTURE_2D_ARRAY_EXT to enable one-, two-, three-dimensional, cube
-       map, one-dimensional array, or two-dimensional array texture,
-       respectively.  If both two- and one-dimensional textures are enabled,
-       the two-dimensional texture is used.  If the three-dimensional and
-       either of the two- or one-dimensional textures is enabled, the
-       three-dimensional texture is used.  If the cube map texture and any of
-       the three-, two-, or one-dimensional textures is enabled, then cube map
-       texturing is used.  If one-dimensional array texture is enabled and any
-       of cube map, three-, two-, or one-dimensional textures is enabled, 
-       one-dimensional array texturing is used.  If two-dimensional array
-       texture is enabled and any of cube map, three-, two-, one-dimensional
-       textures or one-dimensional array texture is enabled, two-dimensional
-       array texturing is used..."
-
-    -- Section 3.11.2 of ARB_fragment_program (Fragment Program Grammar and Restrictions):
-
-       (mostly add to existing grammar rules)
-
-       <optionName>           ::= "MESA_texture_array"
-
-       <texTarget>            ::= "1D"
-                               | "2D"
-                               | "3D"
-                               | "CUBE"
-                               | "RECT"
-                               | <arrayTarget> (if program option is present)
-                               | <shadowTarget> (if program option is present)
-
-       <arrayTarget>          ::= "ARRAY1D"
-                               | "ARRAY2D"
-
-       <shadowTarget>         ::= "SHADOW1D"
-                               | "SHADOW2D"
-                               | "SHADOWRECT"
-                               | <shadowArrayTarget> (if program option is present)
-
-       <shadowArrayTarget>    ::= "SHADOWARRAY1D"
-                               | "SHADOWARRAY2D"
-
-
-    -- Add Section 3.11.4.5.4 "Texture Stack Option"
-
-       "If a fragment program specifies the "MESA_texture_array" program
-       option, the <texTarget> rule is modified to add the texture targets
-       ARRAY1D and ARRAY2D (See Section 3.11.2)."
-
-    -- Section 3.11.6 "Fragment Program Texture Instruction Set"
-
-       (replace 1st and 2nd paragraphs with the following paragraphs)
-
-       "The first three texture instructions described below specify the
-       mapping of 4-tuple input vectors to 4-tuple output vectors.
-       The sampling of the texture works as described in section 3.8,
-       except that texture environments and texture functions are not
-       applicable, and the texture enables hierarchy is replaced by explicit
-       references to the desired texture target (i.e., 1D, 2D, 3D, cube map,
-       rectangle, ARRAY1D, ARRAY2D).  These texture instructions specify
-       how the 4-tuple is mapped into the coordinates used for sampling.  The
-       following function is used to describe the texture sampling in the
-       descriptions below: 
-
-         vec4 TextureSample(vec4 coord, float lodBias, int texImageUnit,
-                            enum texTarget);
-
-       Note that not all four components of the texture coordinates <coord>
-       are used by all texture targets.  Component usage for each <texTarget>
-       is defined in table X.
-
-                                                        coordinates used
-         texTarget          Texture Type               s t r  layer  shadow
-         ----------------   ---------------------      -----  -----  ------
-         1D                 TEXTURE_1D                 x - -    -      -
-         2D                 TEXTURE_2D                 x y -    -      -
-         3D                 TEXTURE_3D                 x y z    -      -
-         CUBE               TEXTURE_CUBE_MAP           x y z    -      -
-         RECT               TEXTURE_RECTANGLE_ARB      x y -    -      -
-         ARRAY1D            TEXTURE_1D_ARRAY_EXT       x - -    y      -
-         ARRAY2D            TEXTURE_2D_ARRAY_EXT       x y -    z      -
-         SHADOW1D           TEXTURE_1D                 x - -    -      z
-         SHADOW2D           TEXTURE_2D                 x y -    -      z
-         SHADOWRECT         TEXTURE_RECTANGLE_ARB      x y -    -      z
-         SHADOWARRAY1D      TEXTURE_1D_ARRAY_EXT       x - -    y      z
-         SHADOWARRAY2D      TEXTURE_2D_ARRAY_EXT       x y -    z      w
-
-         Table X:  Texture types accessed for each of the <texTarget>, and
-         coordinate mappings.  The "coordinates used" column indicate the
-         input values used for each coordinate of the texture lookup, the
-         layer selector for array textures, and the reference value for
-         texture comparisons."
-
-    -- Section 3.11.6.2 "TXP: Project coordinate and map to color"
-    
-       Add to the end of the section:
-       
-       "A program will fail to load if the TXP instruction is used in
-       conjunction with the SHADOWARRAY2D target."
-
-Additions to Chapter 4 of the OpenGL 2.0 Specification (Per-Fragment Operations)
-
-    -- Section 4.4.2.3 "Attaching Texture Images to a Framebuffer"
-
-       Add to the end of the section (spec changes identical to
-       EXT_texture_array):
-
-       "The command
-
-         void FramebufferTextureLayerEXT(enum target, enum attachment,
-                                         uint texture, int level, int layer);
-
-       operates identically to FramebufferTexture3DEXT, except that it
-       attaches a single layer of a three-dimensional texture or a one- or
-       two-dimensional array texture.  <layer> is an integer indicating the
-       layer number, and is treated identically to the <zoffset> parameter in
-       FramebufferTexture3DEXT.  The error INVALID_VALUE is generated if
-       <layer> is negative.  The error INVALID_OPERATION is generated if
-       <texture> is non-zero and is not the name of a three dimensional
-       texture or one- or two-dimensional array texture.  Unlike
-       FramebufferTexture3D, no <textarget> parameter is accepted.
-
-       If <texture> is non-zero and the command does not result in an error,
-       the framebuffer attachment state corresponding to <attachment> is
-       updated as in the other FramebufferTexture commands, except that
-       FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER_EXT is set to <layer>."
-
-    -- Section 4.4.4.1 "Framebuffer Attachment Completeness"
-
-      Add to the end of the list of completeness rules (spec changes
-      identical to EXT_texture_array):
-
-        "* If FRAMEBUFFER_ATTACHMENT_OBJECT_TYPE_EXT is TEXTURE and
-           FRAMEBUFFER_ATTACHMENT_OBJECT_NAME_EXT names a one- or 
-           two-dimensional array texture, then
-           FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER_EXT must be smaller than the
-           number of layers in the texture."
-
-Additions to Chapter 5 of the OpenGL 2.0 Specification (Special Functions)
-
-    -- Section 5.4 "Display Lists"
-
-       Change the first paragraphi on page 242 to say (spec changes
-       identical to EXT_texture_array):
-
-       "TexImage3D, TexImage2D, TexImage1D, Histogram, and ColorTable are
-       executed immediately when called with the corresponding proxy arguments
-       PROXY_TEXTURE_3D or PROXY_TEXTURE_2D_ARRAY_EXT; PROXY_TEXTURE_2D,
-       PROXY_TEXTURE_CUBE_MAP, or PROXY_TEXTURE_1D_ARRAY_EXT;
-       PROXY_TEXTURE_1D; PROXY_HISTOGRAM; and PROXY_COLOR_TABLE,
-       PROXY_POST_CONVOLUTION_COLOR_TABLE, or
-       PROXY_POST_COLOR_MATRIX_COLOR_TABLE."
-
-Additions to Chapter 6 of the OpenGL 2.0 Specification (State and State Requests)
-
-    -- Section 6.1.3 "Enumerated Queries"
-
-       Add after the line beginning "If the value of
-       FRAMEBUFFER_ATTACHMENT_OBJECT_TYPE_EXT is TEXTURE" (spec changes
-       identical to EXT_texture_array):
-
-       "If <pname> is FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER_EXT and the
-       texture object named FRAMEBUFFER_ATTACHMENT_OBJECT_NAME_EXT is a
-       three-dimensional texture or a one- or two-dimensional array texture,
-       then <params> will contain the number of texture layer attached to the
-       attachment point.  Otherwise, <params> will contain the value zero."
-
-    -- Section 6.1.4 "Texture Queries"
-    
-       Change the first three paragraphs (page 248) to say (spec changes
-       identical to EXT_texture_array):
-
-       "The command
-
-         void GetTexImage(enum tex, int lod, enum format,
-                          enum type, void *img);
-
-       is used to obtain texture images. It is somewhat different from the
-       other get commands; tex is a symbolic value indicating which texture
-       (or texture face in the case of a cube map texture target name) is to
-       be obtained.  TEXTURE_1D, TEXTURE_2D, TEXTURE_3D, TEXTURE_1D_ARRAY_EXT,
-       and TEXTURE_2D_ARRAY_EXT indicate a one-, two-, or three-dimensional
-       texture, or one- or two-dimensional array texture, respectively.
-       TEXTURE_CUBE_MAP_POSITIVE_X, ...
-
-       GetTexImage obtains... from the first image to the last for
-       three-dimensional textures.  One- and two-dimensional array textures
-       are treated as two- and three-dimensional images, respectively, where
-       the layers are treated as rows or images.  These groups are then...
-
-       For three-dimensional and two-dimensional array textures, pixel storage
-       operations are applied as if the image were two-dimensional, except
-       that the additional pixel storage state values PACK_IMAGE_HEIGHT and
-       PACK_SKIP_IMAGES are applied. ..."
-
-Additions to Appendix A of the OpenGL 2.0 Specification (Invariance)
-
-    None
-
-Additions to the AGL/GLX/WGL Specifications
-
-    None
-
-GLX Protocol
-
-    None
-
-Dependencies on ARB_fragment_program
-
-    If ARB_fragment_program is not supported, the changes to section 3.11
-    should be ignored.
-
-Dependencies on EXT_framebuffer_object
-
-    If EXT_framebuffer_object is not supported, the changes to section
-    3.8.8 ("Manual Mipmap Generation"), 4.4.2.3, and 6.1.3 should be ignored.
-
-Dependencies on EXT_texture_compression_s3tc and NV_texture_compression_vtc
-
-    (Identical dependency as EXT_texture_array.)
-
-    S3TC texture compression is supported for two-dimensional array textures.
-    When <target> is TEXTURE_2D_ARRAY_EXT, each layer is stored independently
-    as a compressed two-dimensional textures.  When specifying or querying
-    compressed images using one of the S3TC formats, the images are provided
-    and/or returned as a series of two-dimensional textures stored
-    consecutively in memory, with the layer closest to zero specified first.
-    For array textures, images are not arranged in 4x4x4 or 4x4x2 blocks as in
-    the three-dimensional compression format provided in the
-    EXT_texture_compression_vtc extension.  Pixel store parameters, including
-    those specific to three-dimensional images, are ignored when compressed
-    image data are provided or returned, as in the
-    EXT_texture_compression_s3tc extension.
-
-    S3TC compression is not supported for one-dimensional texture targets in
-    EXT_texture_compression_s3tc, and is not supported for one-dimensional
-    array textures in this extension.  If compressed one-dimensional arrays
-    are needed, use a two-dimensional texture with a height of one.
-
-    This extension allows the use of the four S3TC internal format types in
-    TexImage3D, CompressedTexImage3D, and CompressedTexSubImage3D calls.
-
-Errors
-
-    None
-
-New State
-
-    (add to table 6.15, p. 276)
-
-                                                     Initial
-    Get Value                     Type   Get Command  Value Description           Sec.    Attribute
-    ----------------------------  -----  -----------  ----- --------------------  ------  ---------
-    TEXTURE_BINDING_1D_ARRAY_EXT  2*xZ+  GetIntegerv    0   texture object bound  3.8.12  texture
-                                                            to TEXTURE_1D_ARRAY
-    TEXTURE_BINDING_2D_ARRAY_EXT  2*xZ+  GetIntegerv    0   texture object bound  3.8.12  texture
-                                                            to TEXTURE_2D_ARRAY
-
-
-New Implementation Dependent State
-
-    (add to Table 6.32, p. 293)
-
-                                                    Minimum
-    Get Value                     Type  Get Command  Value  Description         Sec.  Attribute
-    ----------------------------  ----  ----------- ------- ------------------  ----- ---------
-    MAX_TEXTURE_ARRAY_LAYERS_EXT   Z+   GetIntegerv   64    maximum number of   3.8.1     -
-                                                            layers for texture
-                                                            arrays
-
-Issues
-
-    (1) Is "texture stack" a good name for this functionality?
-
-        NO.  The name is changed to "array texture" to match the
-        nomenclature used by GL_EXT_texture_array.
-
-    (2) Should the R texture coordinate be treated as normalized or
-    un-normalized?  If it were un-normalized, floor(R) could be thought
-    of as a direct index into the array texture.  This may be more
-    convenient for applications.
-
-        RESOLVED.  All texture coordinates are normalized.  The issue of
-        un-normalized texture coordinates has been discussed in the ARB
-        before and should be left for a layered extension.
-
-        RE-RESOLVED.  The R coordinate is un-normalized.  Accessing an array
-        using [0, layers-1] coordinates is much more natural.
-
-    (3) How does LOD selection work for stacked textures?
-
-        RESOLVED.  For 2D array textures the R coordinate is ignored, and
-        the LOD selection equations for 2D textures are used.  For 1D
-        array textures the T coordinate is ignored, and the LOD selection
-        equations for 1D textures are used.  The expected usage is in a
-        fragment program with an explicit LOD selection.
-
-    (4) What is the maximum size of a 2D array texture?  Is it the same
-    as for a 3D texture, or should a new query be added?  How about for 1D
-    array textures?
-
-        RESOLVED.  A new query is added.
-
-    (5) How are array textures exposed in GLSL?
-    
-        RESOLVED.  Use GL_EXT_texture_array.
-        
-    (6) Should a 1D array texture also be exposed?
-
-        RESOLVED.  For orthogonality, yes.
-
-    (7) How are stacked textures attached to framebuffer objects?
-
-        RESOLVED.  Layers of both one- and two-dimensional array textures
-        are attached using FreambufferTextureLayerEXT.  Once attached, the
-        array texture layer behaves exactly as either a one- or
-        two-dimensional texture.
-
-    (8) How is this extension related to GL_EXT_texture_array?
-    
-        This extension adapats GL_MESAX_texture_stack to the notation,
-        indexing, and FBO access of GL_EXT_texture_array.  This extension
-        replaces the GLSL support of GL_EXT_texture_array with
-        GL_ARB_fragment_program support.
-
-        Assembly program support is also provided by GL_NV_gpu_program4.
-        GL_NV_gpu_program4 also adds support for other features that are
-        specific to Nvidia hardware, while this extension adds only support
-        for array textures.
-
-        Much of text of this extension that has changed since
-        GL_MESAX_texture_stack comes directly from either
-        GL_EXT_texture_array or GL_NV_gpu_program4.
-
-Revision History
-
-    ||2005/11/15||0.1||idr||Initial draft MESAX version.||
-    ||2005/12/07||0.2||idr||Added framebuffer object interactions.||
-    ||2005/12/12||0.3||idr||Updated fragment program interactions.||
-    ||2007/05/16||0.4||idr||Converted to MESA_texture_array.  Brought in line with EXT_texture_array and NV_gpu_program4.||

docs/MESA_trace.spec

@@ -17,6 +17,7 @@ Status
 
 Version
 
+    $Id: MESA_trace.spec,v 1.4 2004/03/25 01:42:42 brianp Exp $
 
 Number
 

docs/MESA_window_pos.spec

@@ -16,6 +16,7 @@ Status
 
 Version
 
+    $Id: MESA_window_pos.spec,v 1.4 2004/03/25 01:42:42 brianp Exp $
 
 Number
 

docs/README.BEOS

@@ -134,3 +134,4 @@ as of February, 1999.
 
 
 ----------------------------------------------------------------------
+$Id: README.BEOS,v 1.12 2004/10/13 00:35:55 phoudoin Exp $

docs/README.QUAKE

@@ -205,3 +205,4 @@ http://www.linuxgames.com/quake2/
 
 
 ----------------------------------------------------------------------
+$Id: README.QUAKE,v 1.3 1998/08/23 15:26:26 brianp Exp $

docs/README.WIN32

@@ -1,163 +1,163 @@
-File: docs/README.WIN32
-
-Last updated: Apr 25, 2007 - Karl Schultz - kschultz@users.sourceforge.net
-
-Quick Start
------ -----
-
-Unzip the MesaLib, MesaGLUT, and MesaDemos ZIP files into the same
-directory.  The libs and demos build separately, so if you do not care
-about the demos or GLUT, you only need to unzip MesaLib.  If you unzip
-more than one ZIP file, they all need to be unzipped into the same
-directory.  Don't worry, you will not overwrite anything.
-
-The Windows build system uses Microsoft Visual Studio.  Project files
-for a specific version of Visual Studio are in their own directory in
-the top-level "windows" directory.  For example, Visual Studio 8 files
-are in windows/VC8.
-
-Support has been dropped for versions of Visual Studio prior to 8. The
-main reason is because Microsoft now provides a free compiler and
-developer environment.  Visual Studio Express can be found at
-
-http://msdn.microsoft.com/vstudio/express/visualc/default.aspx
-
-You'll also need the Platform SDK.  Instructions for obtaining and
-using the SDK with Visual Studio Express can be found at
-
-http://msdn.microsoft.com/vstudio/express/visualc/usingpsdk/
-
-If you are stuck using VC6 or VC7, you may start with these project
-files, but you may need to modify them to reflect changes in the
-Mesa source code tree.  If you sucessfully update the project files,
-please submit them to the author of this document so that they may
-be included in the next distribution. 
-
-The project files to build the core Mesa library, Windows Mesa
-drivers, OSMesa, and GLU are in the mesa directory.  The project files
-to build GLUT and some demo programs are in the progs directory.
-
-Makefiles are no longer shipped or supported, but can be generated
-from the projects using Visual Studio.
-
-
-Windows Drivers
-------- -------
-
-At this time, only the GDI driver is known to work.  Most of the demos
-in progs/demos should work with this driver.
-
-Source code also exists in the tree for other drivers in
-src/mesa/drivers/windows, but the status of this code is unknown.
-
-The GDI driver operates basically by writing pixel spans into a DIB
-section and then blitting the DIB to the window.  The driver was
-recently cleaned up and rewitten and so may have bugs or may be
-missing some functionality.  The older versions of the CVS source may
-be useful in figuring out any problems, or report them to me.
-
-To build Mesa with the GDI driver, build the mesa, gdi, and glu
-projects in the Visual Studio workspace found at
-
-	windows/VC8/mesa/mesa.sln
-
-The osmesa DLL can also be built with the osmesa project.
-
-The build system creates a lib top-level directory and copies
-resulting LIB and DLL files to this lib directory.  The files are:
-
-	OPENGL32.LIB, GLU32.LIB, OSMESA32.LIB
-	OPENGL32.DLL, GLU32.DLL, OSMESA32.DLL
-
-If the MesaDemos ZIP file was extracted, the DLL files are also copied
-to the demos directory.  This facilitates running the demos as described
-below.
-
-
-GLUT and Demos
----- --- -----
-
-A Visual Studio workspace can be found at 
-
-	windows/VC8/progs/progs.sln
-
-It can be used to build GLUT and a few demos.  The GLUT lib and DLL
-are copied to the top-level lib directory, along with the Mesa libs.
-
-The demo build system expects to find the LIB files in the top level
-lib directory, so you must build the Mesa libs first.  The demo
-executables are placed in the demos directory, because some of them
-rely on data files found there.  Also, the Mesa lib DLL's were copied
-there by the Mesa lib build process.  Therefore, you should be able to
-simply run the demo executables from the demo directory.
-
-If you want to run the demos from the Visual Studio, you may have to
-change the startup directory and explicitly state where the executables are.
-
-You may also build all the demo programs by using a makefile.  Go to
-the progs/demos directory and make sure you have executed VCVARS32.BAT
-or whatever setup script is appropriate for your compiler.  Then,
-
-	nmake -f Makefile.win
-
-should build all the demos.
-
-
-Build System Notes
------ ------ -----
-
-VC6 (not actively supported)
----
-
-Visual Studio 6 does not recognize files with the .cc extension as C++
-language files, without a lot of unnatural tweaking.  So, the VC6
-build process uses custom build steps to compile these files in the
-GLU library.
-
-Two additional configurations are provided, Debug x86 and Release x86
-that activate the shader code compilation by defining SLANG_86.  It is
-unknown if and how this works.
-
-VC7 (not actively supported)
----
-
-The above-mentioned .cc problem does not exist in this version.
-
-VC8
----
-
-No notes.
-
-
-General
--------
-
-After building, you can copy the above DLL files to a place in your
-PATH such as $SystemRoot/SYSTEM32.  If you don't like putting things
-in a system directory, place them in the same directory as the
-executable(s).  Be careful about accidentially overwriting files of
-the same name in the SYSTEM32 directory.
-
-The DLL files are built so that the external entry points use the
-stdcall calling convention.
-
-Static LIB files are not built.  The LIB files that are built with are
-the linker import files associated with the DLL files.
-
-The si-glu sources are used to build the GLU libs.  This was done
-mainly to get the better tessellator code.
-
-To build "mangled" Mesa, add the preprocessor define USE_MGL_NAMESPACE
-to the project settings.  You will also need to edit src/mesa.def to
-change all the gl* symbols to mgl*.  Because this is easy to do with a
-global replace operation in a text editor, no additional mangled
-version of mesa.def is maintained or shipped.
-
-If you have a Windows-related build problem or question, it is
-probably better to direct it to me (kschultz@users.sourceforge.net),
-rather than directly to the other Mesa developers.  I will help you as
-much as I can.  I also monitor the Mesa mailing lists and will answer
-questions in this area there as well.
-
-
-Karl Schultz
+File: docs/README.WIN32
+
+Last updated: Apr 25, 2007 - Karl Schultz - kschultz@users.sourceforge.net
+
+Quick Start
+----- -----
+
+Unzip the MesaLib, MesaGLUT, and MesaDemos ZIP files into the same
+directory.  The libs and demos build separately, so if you do not care
+about the demos or GLUT, you only need to unzip MesaLib.  If you unzip
+more than one ZIP file, they all need to be unzipped into the same
+directory.  Don't worry, you will not overwrite anything.
+
+The Windows build system uses Microsoft Visual Studio.  Project files
+for a specific version of Visual Studio are in their own directory in
+the top-level "windows" directory.  For example, Visual Studio 8 files
+are in windows/VC8.
+
+Support has been dropped for versions of Visual Studio prior to 8. The
+main reason is because Microsoft now provides a free compiler and
+developer environment.  Visual Studio Express can be found at
+
+http://msdn.microsoft.com/vstudio/express/visualc/default.aspx
+
+You'll also need the Platform SDK.  Instructions for obtaining and
+using the SDK with Visual Studio Express can be found at
+
+http://msdn.microsoft.com/vstudio/express/visualc/usingpsdk/
+
+If you are stuck using VC6 or VC7, you may start with these project
+files, but you may need to modify them to reflect changes in the
+Mesa source code tree.  If you sucessfully update the project files,
+please submit them to the author of this document so that they may
+be included in the next distribution. 
+
+The project files to build the core Mesa library, Windows Mesa
+drivers, OSMesa, and GLU are in the mesa directory.  The project files
+to build GLUT and some demo programs are in the progs directory.
+
+Makefiles are no longer shipped or supported, but can be generated
+from the projects using Visual Studio.
+
+
+Windows Drivers
+------- -------
+
+At this time, only the GDI driver is known to work.  Most of the demos
+in progs/demos should work with this driver.
+
+Source code also exists in the tree for other drivers in
+src/mesa/drivers/windows, but the status of this code is unknown.
+
+The GDI driver operates basically by writing pixel spans into a DIB
+section and then blitting the DIB to the window.  The driver was
+recently cleaned up and rewitten and so may have bugs or may be
+missing some functionality.  The older versions of the CVS source may
+be useful in figuring out any problems, or report them to me.
+
+To build Mesa with the GDI driver, build the mesa, gdi, and glu
+projects in the Visual Studio workspace found at
+
+	windows/VC8/mesa/mesa.sln
+
+The osmesa DLL can also be built with the osmesa project.
+
+The build system creates a lib top-level directory and copies
+resulting LIB and DLL files to this lib directory.  The files are:
+
+	OPENGL32.LIB, GLU32.LIB, OSMESA32.LIB
+	OPENGL32.DLL, GLU32.DLL, OSMESA32.DLL
+
+If the MesaDemos ZIP file was extracted, the DLL files are also copied
+to the demos directory.  This facilitates running the demos as described
+below.
+
+
+GLUT and Demos
+---- --- -----
+
+A Visual Studio workspace can be found at 
+
+	windows/VC8/progs/progs.sln
+
+It can be used to build GLUT and a few demos.  The GLUT lib and DLL
+are copied to the top-level lib directory, along with the Mesa libs.
+
+The demo build system expects to find the LIB files in the top level
+lib directory, so you must build the Mesa libs first.  The demo
+executables are placed in the demos directory, because some of them
+rely on data files found there.  Also, the Mesa lib DLL's were copied
+there by the Mesa lib build process.  Therefore, you should be able to
+simply run the demo executables from the demo directory.
+
+If you want to run the demos from the Visual Studio, you may have to
+change the startup directory and explicitly state where the executables are.
+
+You may also build all the demo programs by using a makefile.  Go to
+the progs/demos directory and make sure you have executed VCVARS32.BAT
+or whatever setup script is appropriate for your compiler.  Then,
+
+	nmake -f Makefile.win
+
+should build all the demos.
+
+
+Build System Notes
+----- ------ -----
+
+VC6 (not actively supported)
+---
+
+Visual Studio 6 does not recognize files with the .cc extension as C++
+language files, without a lot of unnatural tweaking.  So, the VC6
+build process uses custom build steps to compile these files in the
+GLU library.
+
+Two additional configurations are provided, Debug x86 and Release x86
+that activate the shader code compilation by defining SLANG_86.  It is
+unknown if and how this works.
+
+VC7 (not actively supported)
+---
+
+The above-mentioned .cc problem does not exist in this version.
+
+VC8
+---
+
+No notes.
+
+
+General
+-------
+
+After building, you can copy the above DLL files to a place in your
+PATH such as $SystemRoot/SYSTEM32.  If you don't like putting things
+in a system directory, place them in the same directory as the
+executable(s).  Be careful about accidentially overwriting files of
+the same name in the SYSTEM32 directory.
+
+The DLL files are built so that the external entry points use the
+stdcall calling convention.
+
+Static LIB files are not built.  The LIB files that are built with are
+the linker import files associated with the DLL files.
+
+The si-glu sources are used to build the GLU libs.  This was done
+mainly to get the better tessellator code.
+
+To build "mangled" Mesa, add the preprocessor define USE_MGL_NAMESPACE
+to the project settings.  You will also need to edit src/mesa.def to
+change all the gl* symbols to mgl*.  Because this is easy to do with a
+global replace operation in a text editor, no additional mangled
+version of mesa.def is maintained or shipped.
+
+If you have a Windows-related build problem or question, it is
+probably better to direct it to me (kschultz@users.sourceforge.net),
+rather than directly to the other Mesa developers.  I will help you as
+much as I can.  I also monitor the Mesa mailing lists and will answer
+questions in this area there as well.
+
+
+Karl Schultz

docs/RELNOTES-3.1

@@ -143,3 +143,4 @@ code).  Anyone want to help?
 
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-3.1,v 1.2 2000/04/07 17:08:06 brianp Exp $

docs/RELNOTES-3.2

@@ -9,3 +9,4 @@ have been added.  For a list of bug fixes please read the VERSIONS file.
 
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-3.2,v 1.2 2000/04/07 17:08:06 brianp Exp $

docs/RELNOTES-3.2.1

@@ -29,3 +29,4 @@ GLU library.
 
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-3.2.1,v 1.2 2000/07/21 16:32:33 brianp Exp $

docs/RELNOTES-3.3

@@ -268,3 +268,4 @@ image convolution.  This will (hopefully) be done for Mesa 3.5/3.6.
 
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-3.3,v 1.8 2000/07/21 16:26:41 brianp Exp $

docs/RELNOTES-3.4

@@ -19,3 +19,4 @@ see the VERSIONS file.
 
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-3.4,v 1.2 2002/03/23 02:37:17 brianp Exp $

docs/RELNOTES-3.4.1

@@ -19,3 +19,4 @@ the Mesa 3.4 release.  For details, see the VERSIONS file.
 
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-3.4.1,v 1.2 2001/05/23 14:45:01 brianp Exp $

docs/RELNOTES-3.4.2

@@ -19,3 +19,4 @@ the Mesa 3.4.1 release.  For details, see the VERSIONS file.
 
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-3.4.2,v 1.2 2001/05/23 14:45:01 brianp Exp $

docs/RELNOTES-3.5

@@ -225,3 +225,4 @@ In the future I hope to implement support for 32-bit, floating point
 color channels.
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-3.5,v 1.14 2001/06/20 19:02:48 brianp Exp $

docs/RELNOTES-4.0

@@ -160,3 +160,4 @@ See the VERSIONS file for more details about bug fixes, etc. in Mesa 4.0.
 
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-4.0,v 3.2 2001/10/17 14:59:21 brianp Exp $

docs/RELNOTES-4.0.1

@@ -19,3 +19,4 @@ Mesa 4.0.1 only contains bug fixes since version 4.0.
 See the docs/VERSIONS file for the list of bug fixes.
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-4.0.1,v 1.2 2001/12/18 14:08:23 brianp Exp $

docs/RELNOTES-4.0.2

@@ -47,3 +47,4 @@ D3D			needs updating
 
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-4.0.2,v 1.2 2002/03/23 02:38:39 brianp Exp $

docs/RELNOTES-4.0.3

@@ -49,3 +49,4 @@ D3D			needs updating
 
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-4.0.3,v 1.2 2002/06/26 02:36:34 brianp Exp $

docs/RELNOTES-4.1

@@ -305,3 +305,4 @@ are some things to change:
 
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-4.1,v 1.22 2002/10/29 15:06:37 brianp Exp $

docs/RELNOTES-5.0

@@ -82,3 +82,4 @@ driver call the _mesa_enable_1_4_extensions() function.
 
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-5.0,v 3.2 2002/11/13 15:33:51 brianp Exp $

docs/RELNOTES-5.0.1

@@ -43,3 +43,4 @@ driver call the _mesa_enable_1_4_extensions() function.
 
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-5.0.1,v 3.1 2003/03/30 16:17:54 brianp Exp $

docs/RELNOTES-5.0.2

@@ -43,3 +43,4 @@ driver call the _mesa_enable_1_4_extensions() function.
 
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-5.0.2,v 1.1 2003/09/04 23:10:38 brianp Exp $

docs/RELNOTES-6.0

@@ -84,3 +84,4 @@ See the VERSIONS file for more details about bug fixes, etc. in Mesa 6.0.
 
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-6.0,v 1.3 2004/01/15 15:47:57 brianp Exp $

docs/RELNOTES-6.0.1

@@ -47,3 +47,4 @@ D3D			needs updating
 
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-6.0.1,v 3.1 2004/04/02 23:37:02 brianp Exp $

docs/RELNOTES-6.1

@@ -109,3 +109,4 @@ See the VERSIONS file for more details about bug fixes, etc. in Mesa 6.1.
 
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-6.1,v 3.5 2004/08/17 22:58:23 brianp Exp $

docs/RELNOTES-6.2

@@ -49,3 +49,4 @@ D3D			needs updating
 
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-6.2,v 3.4 2004/10/02 15:43:14 brianp Exp $

docs/RELNOTES-6.2.1

@@ -47,3 +47,4 @@ D3D			needs updating
 
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-6.2.1,v 3.1 2004/12/09 23:21:36 brianp Exp $

docs/RELNOTES-6.3

@@ -112,3 +112,4 @@ D3D			needs updating
 
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-6.3,v 3.13 2005/07/21 15:57:29 brianp Exp $

docs/RELNOTES-6.3.1

@@ -46,3 +46,4 @@ D3D			needs updating
 
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-6.3.1,v 3.1 2005/07/21 18:45:54 brianp Exp $

docs/RELNOTES-6.3.2

@@ -34,3 +34,4 @@ D3D			needs updating
 
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-6.3.2,v 3.2 2005/08/19 16:57:50 brianp Exp $

docs/RELNOTES-6.4

@@ -47,3 +47,4 @@ in Mesa 6.3.
 
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-6.4,v 3.1 2005/10/24 23:33:27 brianp Exp $

docs/autoconf.html

@@ -1,289 +0,0 @@
-<html>
-
-<title>Compilation and Installation using Autoconf</title>
-
-<link rel="stylesheet" type="text/css" href="mesa.css"></head>
-
-<body>
-
-
-<h1>Compilation and Installation using Autoconf</h1>
-
-<ol>
-<li><a href="#basic">Basic Usage</a></li>
-<li><a href="#driver">Driver Options</a></li>
-  <ul>
-  <li><a href="#xlib">Xlib Driver Options</a></li>
-  <li><a href="#dri">DRI Driver Options</a></li>
-  <li><a href="#osmesa">OSMesa Driver Options</a></li>
-  </ul>
-<li><a href="#library">Library Options</a></li>
-  <ul>
-  <li><a href="#glu">GLU</a></li>
-  <li><a href="#glw">GLw</a></li>
-  <li><a href="#glut">GLUT</a></li>
-  </ul>
-<li><a href="#demos">Demo Program Options</a></li>
-</ol>
-
-
-<a name="basic">
-<h2>1. Basic Usage</h2>
-
-<p>
-The autoconf generated configure script can be used to guess your
-platform and change various options for building Mesa. To use the
-configure script, type:
-</p>
-
-<pre>
-    ./configure
-</pre>
-
-<p>
-To see a short description of all the options, type <code>./configure
---help</code>. If you are using a development snapshot and the configure
-script does not exist, type <code>./autogen.sh</code> to generate it
-first. If you know the options you want to pass to
-<code>configure</code>, you can pass them to <code>autogen.sh</code>. It
-will run <code>configure</code> with these options after it is
-generated. Once you have run <code>configure</code> and set the options
-to your preference, type:
-</p>
-
-<pre>
-    make
-</pre>
-
-<p>
-This will produce libGL.so and several other libraries depending on the
-options you have chosen. Later, if you want to rebuild for a different
-configuration run <code>make realclean</code> before rebuilding.
-</p>
-
-<p>
-Some of the generic autoconf options are used with Mesa:
-
-<ul>
-<li><code>--prefix=PREFIX</code> - This is the root directory where
-files will be installed by <code>make install</code>. The default is
-<code>/usr/local</code>.
-</li>
-<li><code>--exec-prefix=EPREFIX</code> - This is the root directory
-where architecture-dependent files will be installed. In Mesa, this is
-only used to derive the directory for the libraries. The default is
-<code>${prefix}</code>.
-</li>
-<li><code>--libdir=LIBDIR</code> - This option specifies the directory
-where the GL libraries will be installed. The default is
-<code>${exec_prefix}/lib</code>. It also serves as the name of the
-library staging area in the source tree. For instance, if the option
-<code>--libdir=/usr/local/lib64</code> is used, the libraries will be
-created in a <code>lib64</code> directory at the top of the Mesa source
-tree.
-</li>
-<li><code>--enable-static, --disable-shared</code> - By default, Mesa
-will build shared libraries. Either of these options will force static
-libraries to be built. It is not currently possible to build static and
-shared libraries in a single pass.
-</li>
-<li><code>CC, CFLAGS, CXX, CXXFLAGS</code> - These environment variables
-control the C and C++ compilers used during the build. By default,
-<code>gcc</code> and <code>g++</code> are used with the options
-<code>"-g -O2"</code>.
-</li>
-<li><code>LDFLAGS</code> - An environment variable specifying flags to
-pass when linking programs. These are normally empty, but can be used
-to direct the linker to use libraries in nonstandard directories. For
-example, <code>LDFLAGS="-L/usr/X11R6/lib"</code>.
-</li>
-<li><code>PKG_CONFIG_PATH</code> - When available, the
-<code>pkg-config</code> utility is used to search for external libraries
-on the system. This environment variable is used to control the search
-path for <code>pkg-config</code>. For instance, setting
-<code>PKG_CONFIG_PATH=/usr/X11R6/lib/pkgconfig</code> will search for
-package metadata in <code>/usr/X11R6</code> before the standard
-directories.
-</li>
-</ul>
-</p>
-
-<p>
-There are also a few general options for altering the Mesa build:
-<ul>
-<li><code>--with-x</code> - When the X11 development libraries are
-needed, the <code>pkg-config</code> utility <a href="#pkg-config">will
-be used</a> for locating them. If they cannot be found through
-<code>pkg-config</code> a fallback routing using <code>imake</code> will
-be used. In this case, the <code>--with-x</code>,
-<code>--x-includes</code> and <code>--x-libraries</code> options can
-control the use of X for Mesa.
-</li>
-<li><code>--enable-gl-osmesa</code> - The <a href="osmesa.html">OSMesa
-library</a> can be built on top of libGL for drivers that provide it.
-This option controls whether to build libOSMesa. By default, this is
-enabled for the Xlib driver and disabled otherwise. Note that this
-option is different than using OSMesa as the driver.
-</li>
-<li><code>--enable-debug</code> - This option will enable compiler
-options and macros to aid in debugging the Mesa libraries.
-</li>
-<li><code>--disable-asm</code> - There are assembly routines
-available for a few architectures. These will be used by default if
-one of these architectures is detected. This option ensures that
-assembly will not be used.
-</li>
-<li><code>--enable-32-bit, --enable-64-bit</code> - By default, the
-build will compile code as directed by the environment variables
-<code>CC</code>, <code>CFLAGS</code>, etc. If the compiler is
-<code>gcc</code>, these options offer a helper to add the compiler flags
-to force 32- or 64-bit code generation as used on the x86 and x86_64
-architectures.
-</li>
-</ul>
-</p>
-
-
-<a name="driver">
-<h2>2. Driver Options</h2>
-
-<p>
-There are several different driver modes that Mesa can use. These are
-described in more detail in the <a href="install.html">basic
-installation instructions</a>. The Mesa driver is controlled through the
-configure option --with-driver. There are currently three supported
-options in the configure script.
-</p>
-
-<ul>
-
-<a name="xlib">
-<li><b><em>Xlib</em></b> - This is the default mode for building Mesa.
-It uses Xlib as a software renderer to do all rendering. It corresponds
-to the option <code>--with-driver=xlib</code>. The libX11 and libXext
-libraries, as well as the X11 development headers, will be need to
-support the Xlib driver.
-</li>
-
-<a name="dri">
-<li><b><em>DRI</em></b> - This mode uses the DRI hardware drivers for
-accelerated OpenGL rendering. Enable the DRI drivers with the option
-<code>--with-driver=dri</code>. See the <a href="install.html">basic
-installation instructions</a> for details on prerequisites for the DRI
-drivers.
-</li>
-
-<!-- DRI specific options -->
-<p>
-<ul>
-<li><code>--with-dri-driverdir=DIR</code> - This option specifies the
-location the DRI drivers will be installed to and the location libGL
-will search for DRI drivers. The default is <code>${libdir}/dri</code>.
-</li>
-<li><code>--with-dri-drivers=DRIVER,DRIVER,...</code> - This option
-allows a specific set of DRI drivers to be built. For example,
-<code>--with-dri-drivers="swrast,i965,radeon,nouveau"</code>. By
-default, the drivers will be chosen depending on the target platform.
-See the directory <code>src/mesa/drivers/dri</code> in the source tree
-for available drivers. Beware that the swrast DRI driver is used by both
-libGL and the X.Org xserver GLX module to do software rendering, so you
-may run into problems if it is not available.</li>
-<!-- This explanation might be totally bogus. Kristian? -->
-<li><code>--disable-driglx-direct</code> - Disable direct rendering in
-GLX. Normally, direct hardware rendering through the DRI drivers and
-indirect software rendering are enabled in GLX. This option disables
-direct rendering entirely. It can be useful on architectures where
-kernel DRM modules are not available.
-</li>
-<li><code>--enable-glx-tls</code> - Enable Thread Local Storage (TLS) in
-GLX.
-</li>
-<li><code>--with-expat=DIR</code> - The DRI-enabled libGL uses expat to
-parse the DRI configuration files in <code>/etc/drirc</code> and
-<code>~/.drirc</code>. This option allows a specific expat installation
-to be used. For example, <code>--with-expat=/usr/local</code> will
-search for expat headers and libraries in <code>/usr/local/include</code>
-and <code>/usr/local/lib</code>, respectively.
-</li>
-</ul>
-</p>
-
-<a name="osmesa">
-<li><b><em>OSMesa</em></b> - No libGL is built in this
-mode. Instead, the driver code is built into the Off-Screen Mesa
-(OSMesa) library. See the <a href="osmesa.html">Off-Screen Rendering</a>
-page for more details.
-</li>
-
-<!-- OSMesa specific options -->
-<p>
-<ul>
-<li><code>--with-osmesa-bits=BITS</code> - This option allows the size
-of the color channel in bits to be specified. By default, an 8-bit
-channel will be used, and the driver will be named libOSMesa. Other
-options are 16- and 32-bit color channels, which will add the bit size
-to the library name. For example, <code>--with-osmesa-bits=16</code>
-will create the libOSMesa16 library with a 16-bit color channel.
-</li>
-</ul>
-</p>
-
-</ul>
-
-
-<a name="library">
-<h2>3. Library Options</h2>
-
-<p>
-The configure script provides more fine grained control over the GL
-libraries that will be built. More details on the specific GL libraries
-can be found in the <a href="install.html">basic installation
-instructions</a>.
-
-<ul>
-<a name="glu">
-<li><b><em>GLU</em></b> - The libGLU library will be built by default
-on all drivers. This can be disable with the option
-<code>--disable-glu</code>.
-</li>
-
-<a name="glw">
-<li><b><em>GLw</em></b> - The libGLw library will be built by default
-if libGLU has been enabled. This can be disable with the option
-<code>--disable-glw</code>.
-</li>
-
-<a name="glut">
-<li><b><em>GLUT</em></b> - The libglut library will be built by default
-if libGLU has been enabled and the glut source code from the MesaGLUT
-tarball is available. This can be disable with the option
-<code>--disable-glut</code>.
-</li>
-</ul>
-</p>
-
-
-<a name="demos">
-<h2>4. Demo Program Options</h2>
-
-<p>
-There are many demonstration programs in the MesaDemos tarball. If the
-programs are available when <code>./configure</code> is run, a subset of
-the programs will be built depending on the driver and library options
-chosen. See the directory <code>progs</code> for the full set of demos.
-
-<ul>
-<li><code>--with-demos=DEMOS,DEMOS,...</code> - This option allows a
-specific set of demo programs to be built. For example,
-<code>--with-demos="xdemos,slang"</code>. Beware that if this option is
-used, it will not be ensured that the necessary GL libraries will be
-available.
-</li>
-<li><code>--without-demos</code> - This completely disables building the
-demo programs. It is equivalent to <code>--with-demos=no</code>.
-</li>
-</ul>
-</p>
-
-</body>
-</html>

docs/bugs.html

@@ -9,9 +9,9 @@
 <H1>Bug Database</H1>
 
 <p>
-The Mesa bug database is hosted on
-<a href="http://freedesktop.org" target="_parent">freedesktop.org</a>.
-The old bug database on SourceForge is no longer used.
+The Mesa bug database is now hosted on
+<a href="http://freedesktop.org" target="_parent">freedesktop.org</a>
+instead of SourceForge.
 </p>
 
 <p>
@@ -26,20 +26,16 @@ Please follow these bug reporting guidelines:
 </p>
 
 <ul>
-<li>Check if a new version of Mesa is available which might have fixed
-the problem.
-<li>Check if your bug is already reported in the database.
-<li>Monitor your bug report for requests for additional information, etc.
-<li>If you're reporting a crash, try to use your debugger (gdb) to get a stack
-trace. Also, recompile Mesa in debug mode to get more detailed information.
-<li>Describe in detail how to reproduce the bug, especially with games
-and applications that the Mesa developers might not be familiar with.
+<li>Make sure you're using the most recent version of Mesa
+<li>Make sure your bug isn't already reported
+<li>Include as much information as possible in the report
 <li>Provide a simple GLUT-based test program if possible
+<li>Check back for follow-ups to the report
 </ul>
 
 <p>
-Bug reports will automatically be forwarded by bugzilla to the Mesa
-developer's mailing list.
+Bug reports will automatically be forwarded to the Mesa developer's mailing
+list.
 </p>
 
 <p>