The EGL_EXT_image_dma_buf_import specification was revised (according to
its revision history) on Dec 5th, 2013, for EGL to not take ownership of
the file descriptors.
Do not close the file descriptors passed in to eglCreateImageKHR with
EGL_LINUX_DMA_BUF_EXT target.
It is assumed, that the drivers, which ultimately process the file
descriptors, do not close or modify them in any way either. This avoids
the need to dup(), as it seems we would only need to just close the
dup'd file descriptors right after.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76188
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
(cherry picked from commit 08264e5dad)
Current method of generating distribution tar-balls involves manually
invoking make + target name in the appropriate places. This temporary
solution is used until we get 'make dist' working.
Currently it does not work, as in order to have the target (which is
also a filename) available in the final Makefile we need to add a PHONY
target + use the correct target name.
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 88cbe3908f)
Also squashed together with:
Revert "mesa: fix make tarballs"
This reverts commit 0fbb9a599d.
Rather than adding hacks around the issue drop the sources from the
final tarball, and re-add them back with 'make dist'. This fixes a
problem when running parallel 'make install' fails as it recreates
sources and triggers partial recompilation.
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83355
Reported-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Tested-by: Kai Wasserbäch <kai@dev.carbon-project.org>
(cherry picked from commit 5a4e0f3873)
With VP2, nv50_miptree is faked because the underlying bo's have to be
laid out in a certain way. This is done by adjusting the address. Make
sure that blits (and everything else for consistency) use the mt address
rather than the bo address as a base.
This fixes retrieving chroma plane with VDPAU.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82255
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 9d52e551a5)
When constant folding a MAD operation, we first fold the multiply and
generate an ADD. However we do so without making sure that the immediate
can be handled in the saturate case. If it can't, load the immediate in
a separate instruction.
Reported-by: Tiziano Bacocco <tizbac2@gmail.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 6c2b079231)
Experimentally, the sampler doesn't appear to like these, neither as
buffer nor as rect textures. So remove 1D from the list of texture types
to make linear when used for staging.
This fixes the OSD in mplayer for VDPAU.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 115d9a5525)
Samplers are only defined up to num_samplers, so set all samplers above
nr to NULL so that we don't try to read them again later.
Tested-by: Christian Ruppert <idl0r@qasl.de>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 362cd26960)
// Marek - merged cce58147eb into this one
The initial firmware for hawaii does not support type3 nop packet.
Detect the new hawaii firmware with query RADEON_INFO_ACCEL_WORKING2.
If the returned value is 3, then the new firmware is used.
This patch uses type2 for the old firmware and type3 for the new firmware.
It fixes the cases when the old firmware is used and the user wants to
manually enable acceleration.
The two possible scenarios are:
- the kernel has no support for the new firmware.
- the kernel has support for the new firmware but only the old firmware
is available.
Additionaly this patch disables GPU acceleration on hawaii if the kernel
returns a value < 2. In this case the kernel hasn't the required fixes
for proper acceleration.
v2:
- Fix indentation
- Use private struct radeon_drm_winsys instead of public struct radeon_info
- Rename r600_accel_working2 to accel_working2
v3:
- Use type2 nop packet for returned value < 3
v4:
- Fail to initialize winsys for returned value < 2
Cc: mesa-stable@lists.freedesktop.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Marek Olšák <marek.olsak@amd.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 36771dc60f)
Conflicts:
src/gallium/winsys/radeon/drm/radeon_drm_winsys.c
Also squashed together with:
winsys/radeon: fix hawaii accel_working2 comment
accel_working2 returns 3 if the new firmware is used.
The comment wasn't updated in v3 of commit:
36771dc winsys/radeon: fix nop packet padding for hawaii
Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 64c379a3a8)
This makes sure to use a no-op swizzle while iteratively rendering each
level of a mipmap otherwise we may loose components and effectively
apply the swizzle twice by the time these levels are sampled.
Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit c6f118484c)
Nominated-by: Kenneth Graunke <kenneth@whitecape.org>
A nomination unadorned with a specific version is now interpreted as
being aimed at the 10.3 branch, (which was recently opened).
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
We switched to these several stable releases ago, (since the MD5 algorithm has
been broken for some time), but only now did I get around to fixing this in
the Makefile rather than just performing this step manually.
CC: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 46d03d37bf)
cs_vertex_buffer_state.enabled_mask and
cs_vertex_buffer_state.dirty_mask are both updated when
r600_set_constant_buffer() is called, so we don't need to manually
update these values.
This fixes a crash with OpenCL programs that have a kernel with no
arguments.
https://bugs.freedesktop.org/show_bug.cgi?id=82671
CC: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit bf7a60f41d)
The commit "radeonsi/compute: Stop leaking the input buffer" is not
meant for 10.2 as it relies on code that was never part of this
branch and breaks the build.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
This will decrement the reference count for buffers referenced in the
command stream will prevent us from leaking them.
CC: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 1e2e550671)
There is a hard limit in older kernels of 256 MB for buffer allocations,
so report this value as MAX_MEM_ALLOC_SIZE and adjust MAX_GLOBAL_SIZE
to statisfy requirements of OpenCL.
CC: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 77ea58ca81)
The patch clears up the msse4.1 handling, yet mesa 10.2 lacks earlier
patches that this one relies on.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The variable i915_C_FILES changed to i915_FILES with commit
34d4216e64 back in mesa 9.1/9.2. Yet we've missed to update the
the android build, essentially creating an dummy/empty driver that
can never work.
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 5facd003a0)
Upstream Android (system/core) has dropped these formats with commit
6bac41f1bf9(get rid of HAL pixelformats 5551 and 4444) yet does not
mention why.
These formats never really worked so we're safe to drop them as well.
Identical commit is available in the android-x86 external/mesa repo
commit 06a2d36edc
Author: Chih-Wei Huang <cwhuang@linux.org.tw>
Date: Wed Sep 25 01:16:57 2013 +0800
android: get rid of HAL pixelformats 5551 and 4444
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit dfa6dc5eb8)
Recent versions of bionic has picked up support for these functions,
leading to build issues due to the redefition of the symbols.
Note: wrapping things in #ifdef does not cut it :\
Identical patch is available in chromium, android-x86 and perhaps other
projects.
commit 66c1c789ce3407472de9ed620c9f815639058835
Author: rmcilroy@chromium.org
Date: Wed Apr 02 10:59:34 2014 +0000
Porting to x64 Android. Remove redefinitions of log2 and log2f.
BUG=
R=kbr@chromium.org
Review URL: https://codereview.chromium.org/216773005
commit 9cc0a0d2b0
Author: Chih-Wei Huang <cwhuang@linux.org.tw>
Date: Sun Jul 21 23:04:19 2013 +0800
android: remove log2, log2f
The functions are already defined in the latest bionic.
Cc: Chia-I Wu <olvaffe@gmail.com>
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Chia-I Wu <olvaffe@gmail.com>
(cherry picked from commit 51a9a09ba8)
For all the people interested in testing the freedreno driver on
their Android devices. The next commit will hook these up within
the libEGL driver (via the gallium-egl backend).
There may be some rough edges but those can be sorted when a
willing builder/tester comes along.
v2:
- s/freefreno/freedreno/. Spotted by Matt Turner.
- Use the installed libdrm headers.
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Cc: Rob Clark <robclark@freedesktop.org>
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit bf05e06757)
- link against libdrm_radeon
- link the r600 driver against libstlport
- linkin the newly added libmesa_pipe_radeon library
required by r600 and radeonsi drivers
v2: Include pipe_radeon after pipe_r600/radeonsi.
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
[Emil Velikov] Split up and add commit message.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit aae453afe8)
- include the correct folders
- add a new buildscript for the common radeon folder
v2: Use the installed libdrm headers over the DRM_TOP ones.
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
[Emil Velikov] Split up and add commit message.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 5bbfa308c9)
For a while the nouveau pipe driver has been a static library
and it has been using STL for even longer.
Correct add the link and cleanup the gallium_DRIVERS.
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 825fa2873f)
nouveau uses STL for a while now thus we need to include
external/stlport/libstlport.mk in order to get the build
at least partially working.
v2: Use the installed libdrm headers over the DRM_TOP ones.
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 6b510c6338)
Instead of catching the special case early, handle it by constructing a
fake gl_texture_image that will cause the values required by the OpenGL
4.0 spec to be returned.
Previously, calling
glGenTextures(1, &t);
glBindTexture(GL_TEXTURE_2D, t);
glGetTexLevelParameteriv(GL_TEXTURE_2D, 0, 0xDEADBEEF, &value);
would not generate an error.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Suggested-by: Brian Paul <brianp@vmware.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Cc: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit ee58c71a65)
Fixes failed assertion when _mesa_update_draw_buffers() was called
with GL_DRAW_BUFFER == GL_FRONT_AND_BACK. The piglit gl30basic hit
this.
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 39b40ad144)
Tahiti has 12 tile pipes, but P8 pipe config.
It looks like there is no way to get the pipe config except for reading
GB_TILE_MODE. The TILING_CONFIG ioctl doesn't return more than 8 pipes,
so we can't use that for Hawaii.
This fixes a regression caused by fcb6c0d2b8
(cherry picked from 9b046474c9 as part of
Mesa 10.2.5) on Tahiti.
v2: add an assertion and print an error on failure
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit 955505f6ff)
Use both macros as in some cases using AC_CHECK_FUNCS alone may fail.
Thus HAVE_DLADDR will not be defined, and as a result most of the code
in megadriver_stub.c will not be compiled. Breaking the backwards
compatibility between older libGL/xserver(s) and DRI megadrivers.
Cc: Jon TURNEY <jon.turney@dronecode.org.uk>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
[Emil Velikov] Commit message.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 39a4cc45a4)
Also squashed together with:
configure.ac: Use LIBS rather than LDFLAGS to add -ldl to dladdr check
ec8ebff "Check for dladdr()" erroneously uses LDFLAGS rather than LIBS to add
-ldl to the dladdr check.
Replace the workaround in 39a4cc4 of explicitly checking in libdl, with a more
correct approach of using LIBS.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit a2e1dc0cce)
Changes in the patch will cause datatype to be computed
correctly for 8 and 16 bit integer formats. For example:
GL_RG8I, GL_RG16I etc.
Fixes many failures in gles3 Khronos CTS test:
copy_tex_image_conversions_required
copy_tex_image_conversions_forbidden
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
(cherry picked from commit 338fef61f8)
Conflicts:
src/mesa/drivers/common/meta.c
We would generate EGL_BAD_CONFIG because _eglGetContextAPIBit
returns zero for the combination of EGL_OPENGL_ES_API and a major
version > 3. By just returning zero, the caller can't tell the
difference between a bad version (which should generate
EGL_BAD_MATCH) and a bad API (which should generate
EGL_BAD_CONFIG). This patch causes us to filter out major
versions > 3 at a point where we can generate the correct error.
Fixes gles3 Khronos CTS test:
egl_create_context.egl_create_context
V2: Fix commit message as suggested by Ian.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit d308f57fe7)
We currently get red bits from ctx->DrawBuffer->Visual.redBits
by making a false assumption that the texture we're writing to
(in glCopyTexImage2D()) is used as a DrawBuffer.
Fixes many failures in gles3 Khronos CTS test:
copy_tex_image_conversions_required
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
(cherry picked from commit 7de90890c6)
Conflicts:
src/mesa/drivers/common/meta.c
GL_TEXTURE_CUBE_MAP is an allowed texture target in glTexStorage2D()
and is allowed to be used (like GL_TEXTURE_2D) with compressed internal
formats.
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit c7def2257a)
Native integers imply a somewhat different handling of booleans. Instead
of being 1.0/0.0 floats, they are 0 (true) / -1 (false) integers. As such
the original optimization no longer applies.
Reported-by: Glenn Kennard <glenn.kennard@gmail.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 7b3d0a9a1e)
1D array miptrees were being laid out as a 2D texture with 1 slice.
This happened due to the mesa core storing the 1D array slice count in
the height field. On Intel hardware, we want to create a 2D array with
a height of 1 for the 1D array case.
Fixes assertion failure in piglit (gen6, gen8):
spec/glsl-1.30/execution/tex-miplevel-selection textureOffset 1DArrayShadow
In release builds of Mesa, this test was observed to cause a GPU hang
on gen8.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81450
Tested-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
(cherry picked from commit c860a379d2)
When using (d3d10) conformant out-of-bound behavior for texel fetching
(currently always enabled) the level still needs to be set to a safe value
even though the offset in the end won't get used because the level is used
to look up the mip offset itself and the actual strides, which might otherwise
crash.
For simplicity, we'll use level 0 in this case (this ought to be safe, llvmpipe
does not actually fill in level 0 information if first_level is larger, but
some random strides / offsets shouldn't hurt as ultimately we always use
offset 0 in this case).
Fixes a crash in some in-house test where random huge levels appear in
lp_build_fetch_texel() (the test actually uses level 0 always but if the
fetching happens in a block with a execution mask random values may appear).
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
(cherry picked from commit 5a12155503)
It's the same as setting the 3 regs separately, but shorter, and it also
seems to be required on GFX7.2 and later. This doesn't fix Hawaii.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit 315f3c171d)
I don't know what happened here, but these three commits were picked earlier,
but the commit IDs referenced in their commit messages do not currently
appear in the master branch, (perhaps a force-push occurred?).
Anyway, we can ignore these now.
While running https://github.com/nvMcJohn/apitest with apitrace I noticed that Mesa was producing bogus results:
wglChoosePixelFormatARB(hdc, piAttribIList = {...}, pfAttribFList = &0, nMaxFormats = 1, piFormats = {19, 65576, 37, 198656, 131075, 0, 402653184, 0, 0, 0, 0, -573575710}, nNumFormats = &12) = TRUE
However https://www.opengl.org/registry/specs/ARB/wgl_pixel_format.txt states
<nNumFormats> returns the number of matching formats. The returned
value is guaranteed to be no larger than <nMaxFormats>.
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 66a1b3a1da)
This fixes 3D texture support in all these cases, because array_size is 1
with 3D textures and depth0 actually contains the "array size".
util_max_layer is universal and returns the last layer index for any texture
target.
A lot of the cases below can't actually be hit with 3D textures, but let's
be consistent.
This fixes a failure in:
piglit layered-rendering/clear-color-all-types 3d single_level
for r600g and radeonsi, which was caused by an incorrect CMASK size
calculation.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit a9528cef6b)
I actually couldn't reproduce this one, but internal docs recommend this
workaround. Better safe than sorry.
Also, the number of dwords for the sync packets is increased by 4 instead
of 2, because it wasn't bumped last time when a new packet was added there.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0e7f56313d)
This fixes the checkerboard pattern in glxgears and anything that triggers
fast color clear.
num_channels is always <= 8, but Hawaii has 16 pipes.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9b046474c9)
In Piglit's EXT_framebuffer_multisample/alpha-to-coverage-dual-src-blend
test, key->nr_color_regions == 2, but the dual source blend FB write has
ir->target set to 0. So we failed to set "Last Render Target Select" on
any FB write message.
We only emit one FB write per render target, so my comment about setting
LastRT on every FB write directed at the last color region is a bit...
misinformed. According to the documentation, depth buffer writes and
scoreboard updates happen on the FB write with LastRT set, so I believe
we want to set it only once.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit d4d886a0bc)
Conflicts:
src/mesa/drivers/dri/i965/gen8_fs_generator.cpp
because float depth texture data needs clamping to [0.0, 1.0]. Let the
_mesa_texstore() fallback to slower path.
Fixes Khronos GLES3 CTS tests:
shadow_execution_vert
shadow_execution_frag
V2: Move the check to _mesa_texstore_can_use_memcpy() function.
Add check for floating point data types.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 9548ba6e7b)
We might be able to do this without an extra program key field, but this
is non-invasive and fixes the bug, for now.
This fixes the following Piglit tests on Broadwell:
- ARB_sample_shading/builtin-gl-sample-id 2
- ARB_sample_shading/builtin-gl-sample-position 2
- EXT_framebuffer_multisample/multisample-blit 2 color
- EXT_framebuffer_multisample/multisample-blit 2 color linear
- EXT_framebuffer_multisample/multisample-blit 2 depth
- EXT_framebuffer_multisample/no-color 2 depth combined
- EXT_framebuffer_multisample/no-color 2 depth separate
- EXT_framebuffer_multisample/no-color 2 depth single
- EXT_framebuffer_multisample/no-color 2 depth-computed combined
- EXT_framebuffer_multisample/no-color 2 depth-computed separate
- EXT_framebuffer_multisample/no-color 2 depth-computed single
- EXT_framebuffer_multisample/unaligned-blit 2 color msaa
- EXT_framebuffer_multisample/unaligned-blit 2 depth msaa
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80991
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 38ffef7840)
Otherwise, the performance warning for shader recompiles will just say
"something else".
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
(cherry picked from commit 4cf47c80fc)
Before it was only storing one of the color components due to truncation.
With this patch it now properly stores all of them.
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit ecd3e89b32)
The bug is triggered by using glTexSubImage2d() with GL_DEPTH_STENCIL
as base internal format and non-zero x, y offsets. Currently x, y
offsets are ignored while updating the texture image.
Fixes Khronos GLES3 CTS tests:
npot_tex_sub_image_2d
npot_tex_sub_image_3d
npot_pbo_tex_sub_image_2d
npot_pbo_tex_sub_image_2d
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
(cherry picked from commit 984a02ba55)
v2:
- Move the end_query() call into the timestamp constructor.
- Still pass false as the wait parameter to get_query_result().
Reviewed-by: Niels Ole Salscheider <niels_ole@salscheider-online.de>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
CC: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 74dfd86ed6)
Conflicts:
src/gallium/state_trackers/clover/core/timestamp.cpp
There are no queries for GL_TEXTURE_LUMINANCE_SIZE,
GL_TEXTURE_INTENSITY_SIZE, GL_TEXTURE_LUMINANCE_TYPE, or
GL_TEXTURE_INTENSITY_TYPE in any version of OpenGL ES or desktop OpenGL
core profile.
NOTE: Without changes to piglit, this regresses
required-sized-texture-formats.
v2: Rebase on different initial change.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: "10.2 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 9a723b970e)
There are no texture borders in any version of OpenGL ES or desktop
OpenGL core profile.
Fixes piglit's gl-3.2-texture-border-deprecated.
v2: Rebase on different initial change.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: "10.2 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 750286600b)
MCS buffers are never allocated on Broadwell, so this does nothing for
now, but puts the infrastructure in place for when they do exist.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
(cherry picked from commit a248b2a4eb)
According to the documentation, we don't need this SINT workaround on
Broadwell. (Or at least, it doesn't mention that we need it.)
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
(cherry picked from commit e10311be9f)
Broadwell generalizes the MCS fields to allow for multiple kinds of
auxiliary surfaces. This patch adds the plumbing to set those values,
but doesn't yet hook any up.
v2: (by Jordan Justen) Use mt for qpitch; pitch is tiles - 1.
v3: Don't forget to subtract 1 from aux_mt->pitch.
v4: Drop unnecessary aux_mt->offset (caught by Jordan Justen).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
(cherry picked from commit fd77187689)
This is the only case where a fs_reg in brw_fs_visitor is used during
optimization/code generation, and it meant that optimizations had to be
careful to not move pixel_x/y's register number without updating it.
Additionally, it turns out we had a couple of other UW values that weren't
getting this treatment (like gl_SampleID), so this more general fix is
probably a good idea (though I wasn't able to replicate problems with
either pixel_[xy]'s values or gl_SampleID, even when telling the register
allocator to reuse registers immediately)
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 66f5c8df06)
This code should execute without regard to the currently executing
channels. Asking for gl_SampleID inside control flow might break in
strange ways. It appears to break even at the top of the program in
SIMD16 mode occasionally as well.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 6dc9e4e22a19108057162d9d8f8c7d559545f8de)
Using brw_imm_* creates a source with file=HW_REG, and the scheduler
inserts barrier dependencies when it sees HW_REG. None of these are
hardware-registers in the sense that they're special and scheduling
shouldn't touch them. A few of the modified cases already have HW_REGs
for other sources, so it won't allow extra flexibility in some cases.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit c938be8ad2)
(This patch was cherry-picked to make the next commit apply cleanly.)
gen8_fs_generator uses these to decide whether to set the execution size
to 8 or 16, so we incorrectly made both of these MOVs the full width in
SIMD16 shaders. (It happened to work out on Gen4-7.)
Setting them should also help inform optimization passes what's really
going on, which could help avoid bugs.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: mesa-stable@lists.freedesktop.org
Both inst->force_uncompressed and inst->force_sechalf mean that the
generated instruction should be uncompressed and have an execution size
of 8. We don't require the visitor to set both flags - setting
inst->force_sechalf by itself is supposed to be enough.
On Gen4-7, guess_execution_size() demoted instructions to 8-wide based
on the default compression state. On Gen8+, we instead set a default
execution size, which worked great...except that we forgot to check
inst->force_sechalf when deciding whether to use 8 or 16.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 1c62126612752f6eedb66f705cc3ff1e11beea5d)
The emit_math?_gen? functions serve to implement workarounds for the
math instruction, none of which exist on Gen8+.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit b24e1cc604)
The negation source modifier on src registers has changed meaning in Broadwell when
used with logical operations. Don't copy propagate when negate src modifier is set
and when the destination instruction is a logical op.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
(cherry picked from commit c17db7537f)
The negation source modifier on src registers has changed meaning in Broadwell when
used with logical operations. Don't copy propagate when negate src modifier is set
and when the destination instruction is a logical op.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
(cherry picked from commit 609d00e13e)
Pack the depth value before overwriting it with cube coordinates.
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit b279f0143f)
Conflicts:
src/gallium/drivers/radeonsi/si_shader.c
This doesn't fix any known issue. In fact, radeon drivers ignore all
the discard flags for textures and implicitly do "discard range"
for any write transfer.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
(cherry picked from commit fe6be9926f)
Something about how we're implementing offsets for TXD is wrong, just
flip to the generic quadop-based implementation in that case.
This is the minimal fix appropriate for backporting.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 114d46829d)
Unfortunately there's no good way to do this on the nv50 shader isa.
Dropping the bias seems preferable to doing the compare post-filtering.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 1065aa92f4)
Add support for more vertex buffer formats.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 06e9536e5f)
Squashed with:
freedreno: update generated headers
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit ba6a490bbc)
Some apps seem to give us a null sampler/view for texture slots which
come before the last used texture slot. In particular 0ad triggers
this.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 6aeeb706d2)
Seems the opcodes are slightly different from a2xx. Resync headers and
move blend_func() helper into hw generation specific code.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit a4d229b099)
We already multiply by bytes per pixel for this, so f3ba7611 broke
mem2gmem for depth/stencil. Drop the now-redundant mutiply by cpp.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit b81de5352d)
In cases where there was no color buf bound, there were inconsistancies
in register settings related to position of depth/stencil inside GMEM.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit f3ba761129)
Squashed with:
freedreno: update generated headers
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 4da8267c36)
These aren't buffers we ever read back from CPU, so using incorrect
reloc fxn wasn't really harming anything. But might as well be correct.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 0d54904c04)
Fixes:
Program received signal SIGSEGV, Segmentation fault.
bind_samplers (comp=0x21b054, comp=0x21b054, ctx=0x211430)
at ../../../../../src/gallium/state_trackers/xa/xa_composite.c:445
445 mask_pic->srf->tex->format);
(gdb) bt
#0 bind_samplers (comp=0x21b054, comp=0x21b054, ctx=0x211430)
at ../../../../../src/gallium/state_trackers/xa/xa_composite.c:445
#1 xa_composite_prepare (ctx=0x211430, comp=comp@entry=0x21b054)
at ../../../../../src/gallium/state_trackers/xa/xa_composite.c:488
#2 0xb6f454b4 in XAPrepareComposite (op=<optimized out>, pSrcPicture=<optimized out>,
pMaskPicture=<optimized out>, pDstPicture=<optimized out>, pSrc=0x5b3ad8, pMask=0x0,
pDst=0x5923b8) at msm-exa-xa.c:533
We can't yet handle solid fill mask, so explicitly reject that, rather
than segfaulting. Otherwise DDX would need to check XA version to see
if solid fill mask were supported.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit b7e7ae9f60)
The hardware allows multiple simultaneous renders with the same
memory-backed constbufs but with each invocation having different
values. However in order for that to work, the data has to be streamed
in via the right constbuf slot. We weren't doing that for UBOs.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2 10.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit b2b7c65122)
Previously, we were assuming that kernel metadata nodes only had 1 operand.
Kernels which have attributes can have more than 1, e.g.:
!0 = metadata !{void (i32 addrspace(1)*)* @testKernel, metadata !1}
!1 = metadata !{metadata !"work_group_size_hint", i32 4, i32 1, i32 1}
Attempting to get the kernel without the correct number of attributes led
to memory corruption and luxrays crashing out.
Fixes the cl/program/execute/attributes.cl piglit test.
Signed-off-by: Aaron Watry <awatry@gmail.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76223
CC: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 824197efd5)
If XA fails to initialize with pipe_loader enabled, the pipe_loader's
cleanup function will close the drm file descriptor. That's pretty bad
because the file descriptor will probably be the X server driver's only
connection to drm. Temporarily solve this by dup()'ing the file descriptor
before handing it over to the pipe loader.
This fixes freedesktop.org bugzilla bug #80645.
v2: Fix CC addresses.
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
(cherry picked from commit 35cf3831d7)
Conflicts:
src/gallium/state_trackers/xa/xa_tracker.c
Apparently INTEL_DEBUG=fs has crashed on Broadwell for anything using
ARB_fragment_program since commit 9cee3ff5. We need to NULL-check the
right field.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit c60a4ba7e3)
Conflicts:
src/mesa/drivers/dri/i965/gen8_fs_generator.cpp
While the official INTEL_swap_event specification says that the drawable
field should contain the GLXDrawable, not the Drawable, the existing
DRI2 code in dri2.c that translates from DRI2_BufferSwapComplete sends out
GLX_BufferSwapComplete with the Drawable's ID, so existing codebases
like Clutter/Cogl rely on getting the Drawable.
Match DRI2's error here and stuff the event with the X Drawable, not
the GLX drawable.
This fixes apps seeing wrong drawables through an indirect GLX context
or with DRI3, which uses the GLX_BufferSwapComplete event directly on
the wire instead of translates Present in mesa.
At the same time, also modify the structure for the event to make sure
that clients don't make the same mistake. This is not an API or ABI
break, as GLXDrawable and Drawable are both typedefs for XID.
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit b4dcf87f34)
Intel would like us to include the marketing names. Developers
additionally want "Broadwell GT1/2/3" because it makes it easier
to identify what hardware users have when they request assistance
or report issues.
Including both makes it easy for everyone to map between the names.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 05126b9bb5)
nouveau screens are reused for the same device node. However in the
scenario where we create screen 1, screen 2, and then delete screen 1,
the surrounding code might also close the original device node. To
protect against this, dup the fd and use the dup'd fd in the
nouveau_device. Also tell the nouveau_device that it is the owner of the
fd so that it will be closed on destruction.
Also make sure to free the nouveau_device in case of any failure.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79823
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@ubuntu.com>
(cherry picked from commit a59f2bb17b)
Previously, if we had something like:
gl_ViewportIndex = idx;
for(int i = 0; i < gl_in.length(); i++) {
gl_Position = gl_in[i].gl_Position;
EmitVertex();
}
EndPrimitive();
The right viewport index would not be set on the primitive because the
last vertex is the provoking one. However blob drivers appear to move
the gl_ViewportIndex write into the for loop, allowing the application
to be ignorant of this detail.
While the application is technically wrong here, because the blob does
it and other drivers appear to implicitly work this way as well, we add
a buffer register that viewport index writes go into, which is then
exported before every EmitVertex() call.
This fixes the remaining piglit tests in ARB_viewport_array for nv50/nvc0.
Signed-off-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
(cherry picked from commit 98a86f61a8)
The old logic would let all negative values go through unclamped, with
potentially disastrous results (probably trying to fetch viewport values
from random memory locations). GL has undefined rendering for vp indices
outside valid range but that's a bit too undefined...
(The logic is now the same as in llvmpipe.)
CC: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Tested-by: Ilia Mirkin <imirkin@alum.mit.edu>
(cherry picked from commit 604e54de78)
As far as I can tell, Broadwell doesn't need any of the SURFACE_STATE
workarounds for textureGather() bugs, so there's no need to emit
a second set of identical copies.
To keep things simple, just point the gather surface index base to the
same place as the texture surface index base.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f6a99d1167)
Fix an off by one in the texture unit walk during texblend
setup on gen2. This caused the last enabled texunit to be
skipped resulting in totally messed up texturing.
This is a regression introduced here:
commit 1ad443ecdd
Author: Eric Anholt <eric@anholt.net>
Date: Wed Apr 23 15:35:27 2014 -0700
i915: Redo texture unit walking on i830.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit ca55a1aaa7)
When the last context in a share group is destroyed, the hash table
containing all of the shader programs (ctx->Shared->ShaderObjects) is
destroyed, throwing away all of the shader programs.
Using a static variable to store program IDs ends up holding on to them
after this, so we think we still have a compiled program, when it
actually got destroyed. _mesa_UseProgram then hits GL errors, since no
program by that ID exists.
Instead, store the program IDs in the context, so we know to recompile
if our context gets destroyed and the application creates another one.
Fixes es3conform tests when run without -minfmt (where it creates
separate contexts for testing each visual).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77865
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit a20994d616)
Conflicts:
src/mesa/drivers/dri/i965/brw_meta_stencil_blit.c
Prior to GLX 1.3 there was the glxMakeCurrent() function that took a
single drawable handle. The Drawable could be either a bare XID for a
Window or an XID for a glxpixmap.
GLX 1.3 added glxMakeContextCurrent that takes 2 handles: one for
reading, one for writing. Nowadays the old glxMakeCurrent call is
implemented as a call to glxMakeContextCurrent with the single handle
duplicated.
Because of this it is allowed to use a plain-old Window ID as an
argument to glxMakeContextCurrent, although nobody really documents this
sort of thing. The manpage for the NEW call specifies the arguments as
GLXPixmaps, but the actual code accepts Window XIDs too, and handles
them correctly.
Similarly, the glxSelectEvents function can also take a bare Window XID.
The "piglit" tests all use GLXWindows and/or GLXPixmaps. You never
tested swap events with a bare Window XID. That is what my app was
doing.
The swap_events code worked with Window XIDs in mesa 7.x.y. The new code
added in versions 8, 9, and 10 assumes that all buffer swap events have
a GLXPixmap associated with them. Because of the historical quirks
above, this is not true. Swap events for bare Window XIDs do NOT have a
glxpixmap resulting in a segfault.
Any app that uses the old school glxMakeCurrent call with a Window XID
while trying to use swap_events will crash when the libs try to lookup
the nonexistent GLXPixmap associated with the incoming swap event.
I believe that the people who wrote the spec overlooked this, because
the "sbc" field comes from the OML_sync extension that is defined in
terms of glxpixmaps only.
v2 (idr): Formatting changes.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54372
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 86bd2196b4)
An LLVMContext should only be accessed by a single and using the global
context was causing crashes in multi-threaded environments. Now we use
a separate context for each compile.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
CC: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 4aa128a123)
This is just a hack, it should be possible to create a temporary zeta
surface and render to that instead. However that's more complicated and
this avoids the render being entirely broken and errors being reported
by the card.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 25182e249e)
A drawable size of 0x0 means that we don't have buffers for a drawable yet,
not that we have a zero-sized buffer. Core mesa shouldn't be optimizing out
drawing based on buffer size, since the draw call could be what triggers
the driver to go and get buffers. As discussed in the referenced bug report,
the optimization was added as part of a scatter-shot attempt to fix a
different problem. There's no other example in mesa core of using the
buffer size in this way.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74005
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 7928b946ad)
Like on Haswell, we need to use 8x4 aligned rectangle primitives for
hierarchical depth buffer resolves and depth clears. See the comments
in brw_blorp.cpp's brw_hiz_op_params() constructor. (The Broadwell
documentation confirms that this is still necessary.)
This patch makes the Broadwell code follow the same behavior as Chad and
Jordan's Gen7 BLORP code. Based on a patch by Topi Pohjolainen.
This fixes es3conform's framebuffer_blit_functionality_scissor_blit
test, with no Piglit regressions.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 49659ad90c)
We've used the LD sampler message for pull constant loads on earlier
hardware for some time, and also were already using it for the FS on
Broadwell. This patch makes us use it for Broadwell VS/GS as well.
I believe that when I wrote this code in 2012, we still used the data
port in some cases, and I somehow neglected to convert it while
rebasing.
Improves performance in GLBenchmark 2.7 Egypt by 416.978% +/- 2.25821%
(n = 17). Many other applications should benefit similarly: this speeds
up uniform array access in the VS, which is commonly used for skinning
shaders, among other things.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Ben Widawsky <ben@bwidawsk.net>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 5d8e246ac8)
When faced with code such as:
mov vgrf31.0:UD, 960D
mov vgrf31.1:UD, vgrf30.xxxx:UD
The dead code eliminator didn't consider reg_offsets, so it decided that
the second instruction was writing was writing to the same register as
the first one, and eliminated the first one. But they're actually
different registers.
This fixes INTEL_DEBUG=shader_time for vertex shaders. In the above
code, vgrf31.0 represents the offset into the shader_time buffer where
the data should be written, and vgrf31.1 represents the actual time
data. With a completely undefined offset, results were...unexpected.
I think this is probably one of the few cases (maybe only case) where we
generate multiple MOVs to a large VGRF. Normally, we just use them as
texturing results; the other SEND-from-GRF uses a size 1 VGRF.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79029
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit d0575d98fc)
When a multisampled texture is used for sampling the fast clear color value
needs to be programmed into the surface state. This was being left as all
zeroes so if the surface was cleared to a value other than black then it
wouldn't work properly. This doesn't matter for single-sample textures because
in that case the MCS buffer is resolved before it is used as a texture source.
https://bugs.freedesktop.org/show_bug.cgi?id=79729
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 765efeef88)
When walking backwards, we want to stop at the head sentinel, which is
where scan_inst->prev->prev == NULL, not scan_inst->prev == NULL.
Fixes random crashes, as well as valgrind errors.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit ecc78eab11)
This fixes:
In file included from
/home/adrian/workspace/mesa/mesa-master.git/src/mesa/vbo/vbo_exec_api.c:445:0:
/home/adrian/workspace/mesa/mesa-master.git/src/mesa/vbo/vbo_attrib_tmp.h:28:38:
fatal error: util/u_format_r11g11b10f.h: No such file or directory
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Adrian Negreanu <adrian.m.negreanu@intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
(cherry picked from commit 0048483f73)
Fixes linker error:
ld:
.../libmesa_dri_common_intermediates/libmesa_dri_common.a(dri_util.o):
in function globalDriverAPI:dri_util.c(.data.rel+0x0): error:
undefined reference to 'driDriverAPI'
As an example, you can see that mesa_dri_drivers
also uses common/libmegadriver_stub (src/mesa/drivers/dri/Makefile.am)
The _stub part might be confusing, but
it actually provides the dri-driver shared lib constructor,
megadriver_stub_init, which will later on load the real
platform dependent part and call
l __driDriverGetExtensions_<platform>
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Adrian Negreanu <adrian.m.negreanu@intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
(cherry picked from commit aba0f152be)
A recent ApiTrace change, that tries to dump more buffer state
causes Mesa from my distro (10.1.4) to segfaults here.
I haven't actually confirm this fixes it (I can't repro on master),
but it seems a good idea to be defensive here anyway.
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit eb58aa9cf0)
There is a short-immediate version as well, but it should never end up
getting used since it would have gotten folded earlier.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit bd7dd3ed06)
In the presence of LLVM the final library exports every symbol from
the llvm namespace. Resolve this by using a version script (w/o the
version/name tag).
Considering that there are only ~35 symbols, explicitly list them
to minimize the chances of rogue symbols sneaking in.
v2: Conditionally include the version-script.
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> (v1)
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit a75baba2f1)
Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
While resolving conflicts in cherry picking commit d226191, I
accidentally introduced some garbage. Because radeonsi isn't built by
default, the problem went unnoticed by me.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reported-by: Laurent Carlier <lordheavym@gmail.com>
Tested-by: Laurent Carlier <lordheavym@gmail.com>
The nouveau fw currently prints a bunch of errors. No point in seeing
those all the time, esp since compute doesn't really work in the first
place.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Conflicts:
src/gallium/drivers/nouveau/nvc0/nvc0_screen.c
(cherry picked from commit ca65fc418f)
The new hardware actually supports this OpenGL 1.x feature natively,
so we can finally drop our shader workarounds.
Not many applications use GL_CLAMP, and most use it unintentionally, but
it's trivial to do right, so we should.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 221169693b)
We have customers using NULL as a way to test the robustness of the API.
Without this check, EGL will segfault trying to dereference
dri2_surf->wl_win->private because wl_win is NULL.
This fix adds a check and sets EGL_BAD_NATIVE_WINDOW
v2: Incorporated feedback from idr - moved the check to a higher level
function.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 91ff0d4c65)
For some reason, CP DMA doesn't follow the predicate bit if I enable it,
so this is the only option.
This fixes piglit: spec/NV_conditional_render/clear
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit bf701a84eb)
Same as b026b6bbfe, but
COLOR_ARRAY_SIZE/SECONDARY_COLOR_ARRAY_SIZE.
Ideally we wouldn't munge the incoming state, so that we wouldn't need
to unmunge it back on glGet*. But the array size state is copied and
referred in many places, many of which couldn't take an GLenum like
GL_BGRA instead of a plain integer. So just hack around on glGet*,
to ensure there is no risk of introducing regressions elsewhere.
This bug causes problems to Apitrace, resulting in wrong traces. See
https://github.com/apitrace/apitrace/issues/261 for details.
Tested with piglit arb_vertex_array_bgra-get, which was created for this
purpose.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit e3e13d6b85)
EGL 1.4 Specification says that
eglMakeCurrent(display, EGL_NO_SURFACE, EGL_NO_SURFACE, EGL_NO_CONTEXT)
can be used to release the current thread's ownership on the surfaces
and context.
MESA's egl implementation was only accepting the parameters when the
KHR_surfaceless_context extension is supported.
[chadv] Add quote from the EGL 1.4 spec.
Cc: "10,1, 10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
(cherry picked from commit 0ca0d5743f)
Framebuffers can have NULL attachments since a while. llvmpipe handled
that properly for lp_rast_shade_quads_mask but it seems the change didn't
make it to lp_rast_shade_tile.
This fixes piglit fbo-drawbuffers-none test (though I need to increase
the FB_SIZE from 32 to 256 so the tris cover some tiles fully).
https://bugs.freedesktop.org/show_bug.cgi?id=79421
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
(cherry picked from commit 576868140b)
mesaVisual can be NULL with configless context since this commit:
commit 551d459af4
Author: Neil Roberts <neil@linux.intel.com>
Date: Fri Mar 7 18:05:47 2014 +0000
Add the EGL_MESA_configless_context extension
...
Previously the i965 and i915 drivers were explicitly creating a zeroed visual
whenever 0 is passed for the EGLConfig.
We attempt to dereference the visual in i915 and now we don't create a
zeroed-out one one it crashes, breaking at least weston in an i915. There's
no point in doing so as it would be zero anyway.
v2: Fixed a typo in commit message. Added some tags.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1100967
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 90b5747856)
These prototypes are necessary because GLES1 library builds will create
dispatch functions for them. We can't directly include GLES/gl.h
because it would conflict the previously-included GL/gl.h. Since GLES1
ABI is not expected to every add more functions, the path of least
resistance is to just duplicate the prototypes for the functions that
aren't already in desktop OpenGL.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79294
Acked-by: Matt Turner <mattst88@gmail.com>
Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 7b1aeec9cd)
In commit af38ef907, I added a "fix" to color outputs not being assigned
correctly when sample mask was being output. This was totally wrong --
the color indices (i.e. "si" values) were the ones that were wrong. Undo
that hunk.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 0d699530ff)
Requested-by: Ilia Mirkin <imirkin@alum.mit.edu>
Commit c5d822dad9 added support for sample mask incorrectly. It became
treated as a color output, and messed up the color output indices.
Revert the hunk that did that, and add explicit support just like for
depth/stencil writes.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Acked-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit ab7bd7093d)
Requested-by: Ilia Mirkin <imirkin@alum.mit.edu>
Fixes:
xa_tracker.c: In function 'xa_tracker_create':
xa_tracker.c:147:5: error: implicit declaration of function 'pipe_loader_drm_probe_fd' [-Werror=implicit-function-declaration]
in some build configurations, as XA now implicitly depends on
gallium_drm_loader.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
(cherry picked from commit 20d14ef263)
Bugzilla: https://bugs.gentoo.org/show_bug.cgi?id=511700
Requested-by: Matt Turner <mattst88@gmail.com>
There is no reason anymore to load with RTLD_GLOBAL and for some driver
this even result in dlclose failing to unload leading to catastrophic
failure with swrast fallback.
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
(cherry picked from commit e3cc0d90e1)
The call to get_variable_being_redeclared() may delete 'var' so we
can't reference var->name afterward. We fix that by examining the
var's name before making that call.
Fixes valgrind warnings and possible crash when running the piglit
tests/spec/glsl-1.30/execution/clipping/vs-clip-distance-in-param.shader_test
test (and probably others).
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit f9cecca7a6)
Previously, we set up new entries in the params[] array on every access
of a rectangle texture. Unfortunately, we only reserve space for
(2 * MaxTextureImageUnits) extra entries, so programs which accessed
rectangle textures more times than that would write off the end of the
array and likely crash.
We don't really have a decent mapping between the index returned by
_mesa_add_state_reference and our index into the params array, so we
have to manually search for it.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78691
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit bb9623a1a8)
Fixes framebuffer_blit_functionality_multisampled_to_singlesampled_blit
es3 cts test on bdw. Also fixes this on ivb when ivb is forced to use
the meta path.
No piglit regressions on IVB.
Further input from Ken:
"Unfortunately, this doesn't fix MRT for integer data.
In the single-sampled case, since we're directly copying data, we were
read/copy/write data as "float" values, which actually contained the
integer bits. Here, we can't do that since we need to process the
actual integer data.
I do wonder if we could use intBitsToFloat/uintBitsToFloat to stuff the
integer bits in the float gl_FragColor output. Just a crazy idea.
In the long term (post 10.2), I think we should draft an extension that
allows you to do "layout(location = all)" on user-defined fragment
shader outputs. (Or some similar syntax.)"
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit a6022e5405)
This reverts commit a6860100b8.
Why this code didn't work in all circumstances is unknown and without a
working Ironlake simulator (which uses a different AUB format) we'll
probably never know, short of a lot of experimentation, and spending a
bunch of time to try to optimize a few instructions on Ironlake is not
time well spent.
Moreover, for mix(vec4, vec4, vec4) using the accumulator introduces a
dependence between the otherwise independent per-component calculations.
Not using the accumulator, even if it means an extra instruction per
component might be preferable. We don't know, we don't have data, and
we don't have the necessary register on Ironlake for shader_time to tell
us.
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77707
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit c2c639ecf6)
This reverts commit 2dfbbeca50 with the
comment about MAC and implicit accumulator removed.
Why this code didn't work in all circumstances is unknown and without a
working Ironlake simulator (which uses a different AUB format) we'll
probably never know, short of a lot of experimentation, and spending a
bunch of time to try to optimize a few instructions on Ironlake is not
time well spent.
Moreover, for mix(vec4, vec4, vec4) using the accumulator introduces a
dependence between the otherwise independent per-component calculations.
Not using the accumulator, even if it means an extra instruction per
component might be preferable. We don't know, we don't have data, and
we don't have the necessary register on Ironlake for shader_time to tell
us.
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77703
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit db42dd8952)
Note that predicated instructions with defs are still not supported
because transformation to SSA doesn't handle them yet.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 452a4151aa)
The glGetGraphicsResetStatusARB from ARB_robustness extension always
returns GUILTY_CONTEXT_RESET_ARB and never returns NO_ERROR for guilty
context with LOSE_CONTEXT_ON_RESET_ARB strategy. This is because Mesa
returns GUILTY_CONTEXT_RESET_ARB if batch_active !=0 whereas kernel
driver never reset batch_active and this variable always > 0 for guilty
context. The same behaviour also can be observed for batch_pending and
INNOCENT_CONTEXT_RESET_ARB.
But ARB_robustness spec says:
If a reset status other than NO_ERROR is returned and subsequent calls
return NO_ERROR, the context reset was encountered and completed. If a
reset status is repeatedly returned, the context may be in the process
of resetting.
8. How should the application react to a reset context event?
RESOLVED: For this extension, the application is expected to query the
reset status until NO_ERROR is returned. If a reset is encountered, at
least one *RESET* status will be returned. Once NO_ERROR is
encountered, the application can safely destroy the old context and
create a new one.
The main problem is the context may be in the process of resetting and
in this case a reset status should be repeatedly returned. But looks
like the kernel driver returns nonzero active/pending only if the
context reset has already been encountered and completed. For this
reason the *RESET* status cannot be repeatedly returned and should be
returned only once.
The reset_count and brw->reset_count variables can be used to control
that glGetGraphicsResetStatusARB returns *RESET* status only once for
each context. Note the i915 triggers reset_count twice which allows to
return correct reset count immediately after active/pending have been
incremented.
v2 (idr): Trivial reformatting of comments.
Signed-off-by: Pavel Popov <pavel.e.popov@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 8dc4a98c44)
If the source renderbuffer has a depth > 0, then send a Z texcoord
which is set to the source attachment Z offset.
This fixes piglit's gl-3.2-layered-rendering-gl-layer-render with the
GL_TEXTURE_2D_MULTISAMPLE_ARRAY case test on i965/gen8.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 57876fee38)
brw_color_buffer_write_enabled depends on brw->fragment_program, which
means we have to listen to BRW_NEW_FRAGMENT_PROGRAM.
On most generations, this was only called from a function that already
subscribed. However, on Broadwell, we failed to listen to the necessary
event in the atom that emits 3DSTATE_PS_BLEND.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 746921cbb4)
I forgot to disable writemasking on the OR and MOV which set the render
target index and "source 0 alpha present to render target" bit.
Using get_element_ud is equivalent and avoids a line-wrap.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 7d3985ca6c)
_mesa_meta_setup_blit_shader() currently generates a fragment shader
which, irrespective of the number of draw buffers, writes the color
to only one 'out' variable. Current shader rely on an undefined
behavior and possibly works by chance.
From OpenGL 4.0 spec, page 256:
"If a fragment shader writes to gl_FragColor, DrawBuffers specifies a
set of draw buffers into which the single fragment color defined by
gl_FragColor is written. If a fragment shader writes to gl_FragData,
or a user-defined varying out variable, DrawBuffers specifies a set
of draw buffers into which each of the multiple output colors defined
by these variables are separately written. If a fragment shader writes
to none of gl_FragColor, gl_FragData, nor any user defined varying out
variables, the values of the fragment colors following shader execution
are undefined, and may differ for each fragment color."
OpenGL 4.4 spec, page 463, added an additional line in this section:
"If some, but not all user-defined output variables are written, the
values of fragment colors corresponding to unwritten variables are
similarly undefined."
V2: Write color output to gl_FragColor instead of writing to multiple
'out' variables. This'll avoid recompiling the shader every time
draw buffers count is updated.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 46737cebd3)
In commit 4be146b1, I neglected to add the new property to the strings
array. This leads to the string '(null)' to be printed instead when
converting a GS shader to text.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
(cherry picked from commit cdeb7004e0)
Make sure to normalize the z coordinates as well as the x/y ones when
there are mipmaps present. Fixes 3d mipmap generation, which now uses
the blit path.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
(cherry picked from commit 28360fcad7)
These instructions can come in either through IMUL_HI/UMUL_HI TGSI
opcodes, or from OP_DIV constant folding.
Also make sure that the constant foldings which delete the original
instruction still get counted as having done something.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
(cherry picked from commit d2a3de19c6)
Retrieving the high 32 bits of a signed multiply is rather annoying. It
appears that the simplest way to do this is to compute the absolute
value of the arguments, and perform a u32 x u32 -> u64 operation. If the
arguments' signs differ, then negate the result. Since there is no u64
support in the cvt instruction, we have the perform the 2's complement
negation "by hand".
This logic can come into use by the IMUL_HI instruction (very unlikely
to be seen), as well as from constant folding of division by a constant.
Fixes dolphin's divisions by 255.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
(cherry picked from commit d3a5cf052c)
Separating the software fallbacks from the rest of the meta path (which
is usually hardware accelerated) gives callers better control over their
blitting options.
For example, i965 might want to try meta blit, hardware blits, then
swrast as a last resort. Splitting it makes that possible.
This updates all callers to maintain the existing behavior (even in the
few cases where it isn't desirable behavior - later patches can change
that).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 54540ea691)
UNION appears to expect that all of its sources are conditionally
defined. Otherwise it inserts an unpredicated mov instruction which
overwrites the desired result. This fixes tests that use UMUL_HI, and
much less directly, unsigned integer division by a constant, which uses
this functionality in a peephole pass.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
(cherry picked from commit 5b8f1a0f7c)
I think a3xx and later should support (it is part of GLES3), but this
isn't needed for the time being and still needs to be reversed.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Gallium already gives us height==1 for these, so the texture state is
already setup correctly to emulate 1D textures as a Nx1 2D texture. We
just need to supply the .y coord.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
That was easy. Turns out it is just a matter of setting one bit.
Enable sampling from sRGB texture, and therefore enable GL 2.1 :-)
Signed-off-by: Rob Clark <robclark@freedesktop.org>
The loops for updating the multiple packed fields in SP_VS_OUT[] and
SP_VS_VPC_DST[] will zero out one register beyond the last that on
required. Which is normally not a problem (and is kinda convenient
when looking at cmdstream dumps) unless we have maximum (16) varyings.
Fix loop termination condition so that this does not happen.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
We need to size input/output tables big enough for special inputs/
outputs (gl_Position, gl_FrontFacing, etc) which, while they don't
count towards the hw limit of 16 attributes or 16 varyings, we do
still need to track them all the same.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Hardware only supports 16. Which fd3_shader_variant properly reflected,
but the pipe cap did not, leading to array overflow (and shaders that
could not possibly work).
Also a bunch of asserts to make problems like this easier to see.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
The KILL_IF opcode could potentially be merged in to the regular KILL
opcode function. It was a pain to do so, so I've left is separated
for cleanliness.
Signed-off-by: Ryan Houdek <Sonicadvance1@gmail.com>
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Adds a large sum of TGSI opcodes to the a3xx compiler.
For integer opcodes we have 28 opcodes added.
Adds 4 floating point compare opcodes
If GLSL 1.30 is enabled, this allows the GLSL 1.30 piglits to have a
completion amount of 432/641.
Signed-off-by: Ryan Houdek <Sonicadvance1@gmail.com>
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Split out fd_query into an abstract base class, to allow multiple
implementations. The current sw based queries are moved into
fd_sw_query.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
We allocate dispatch tables for BeginEnd and OutsideBeginEnd. But
when we destroy the context we were freeing the BeginEnd and Exec
tables. If Exec==BeginEnd we did a double-free. This would happen
if the context was destroyed while inside a glBegin/End pair. Now
free the BeginEnd and OutsideBeginEnd pointers.
Cc: "10.1", "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit ef6b6658f9)
Fixes the valgrind report below and random crashes with piglit on radeonsi.
==30005== Conditional jump or move depends on uninitialised value(s)
==30005== at 0xB13584E: st_translate_program (st_glsl_to_tgsi.cpp:5100)
==30005== by 0xB14698B: st_translate_fragment_program (st_program.c:747)
==30005== by 0xB14777D: st_get_fp_variant (st_program.c:824)
==30005== by 0xB11219C: get_color_fp_variant (st_cb_drawpixels.c:1042)
==30005== by 0xB1131AE: st_DrawPixels (st_cb_drawpixels.c:1154)
==30005== by 0xAFF8806: _mesa_DrawPixels (drawpix.c:162)
==30005== by 0x4EB86DB: stub_glDrawPixels (generated_dispatch.c:6640)
==30005== by 0x4F1DF08: piglit_visualize_image (piglit-util-gl.c:1574)
==30005== by 0x40691D: draw_image_to_window_system_fb(int, bool) (draw-buffers-common.cpp:733)
==30005== by 0x406C8B: draw_reference_image(bool, bool) (draw-buffers-common.cpp:854)
==30005== by 0x40722A: piglit_display (alpha-to-coverage-dual-src-blend.cpp:117)
==30005== by 0x4EA7168: run_test (piglit_fbo_framework.c:52)
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
(cherry picked from commit 2bab95973d)
v2: Create the intel renderbuffer with level hardcoded to zero instead
of overriding it in the surface state configuration. Also moved the
dimension adjustments for tiling, mip level, msaa into the render
buffer creation. Finally prepares for another blit path needed for
miptree updownsampling.
v3 (Ken): Dropped unnecessary memory context for "ralloc_asprintf()"
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
(cherry picked from commit d1829badf5)
v2: Configure stencil directly for final dimensions instead of
adjusting bit by bit for tiling, mip level and msaa.
v3 (Ken): Used non-static constant for horizontal alignment
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 9d752c098c)
v2: Allow hardware to offset accesses to individual layers. Also leave
the mip-level overriding for the creator of the intel renderbuffer
to handle. Merged with "i965/gen8: Allow stencil buffers to be
configured as single sampled"
Ken: I left the "_mesa_problem()" still in place. I think it is clearer
to remove it in a separate patch.
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 36caae48b2)
v2: Use intel_mipmap_tree::total_width in order to get correct alignment
automatically. Also use "mt->total_height / mt->physical_depth0" as
surface height allowing hardware to offset to correct slice.
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 6aefaa4eb2)
mt->format is of type mesa_format, and therefore can't be
used with _mesa_base_fbo_format which requires a GLenum input.
On gen8, this fixes various piglit fbo-depthstencil tests with
samples > 1.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 103057b2b7)
Previously the code used the total number of ubos being declared in the
linked program (so the ubos of all shaders combined), use the number
from the particular shader instead.
This fixes an assertion failure with piglit arb_uniform_buffer_object-maxblocks
seen in llvmpipe since 8a9f5ecdb1 as it now emits
code for each declared buffer, not just the ones actually used.
CC: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 3e817e7e56)
We're moving towards requiring interface additions to be appended to the
end of the interface block. No functional change, opcodes are assigned as
before, but version 2 additions are now grouped together, which prevents
a scanner warning.
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
(cherry picked from commit 06842d436e)
The depth extent field is used to limit the allowed slice range that
can be rendered to.
With the previous setting, only slice 0 could be rendered.
This fixes piglit amd_vertex_shader_layer-layered-depth-texture-render.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
(cherry picked from commit c51c192891)
Fixes piglit's
'gl-3.2-layered-rendering-clear-color-all-types 3d mipmapped'
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
(cherry picked from commit e47d08adef)
If blorp is disabled for color clears, then piglit's
'gl-3.2-layered-rendering-clear-color-all-types 3d mipmapped'
will fail.
Currently, gen8 fails similarly on this test because gen8
does not use blorp.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
(cherry picked from commit b875f39e29)
Same issues as the previous commit fixed for Gen7:
- Bogus physical->logical layer conversion; depth/stencil surfaces
are still IMS layout on Gen8.
- mt_layer ignored in layered rendering case, which breaks handling
of views with MinLayer.
- Render target array extent not set correctly for arrays.
I'm not able to test this one since I can't get a Broadwell yet, but
it's the same set of fixes as for Gen7.
V2: Restore the MAX2() to account for zero depth/layer_count.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 23e9f06569)
Again, a few problems:
- Layered attachments did not honor MinLayer.
- Non-layered MSAA attachments rendered to the wrong layer due to
dividing by the layer count. All depth buffers use the IMS layout, so
the physical layer count == logical layer count.
- Layered attachments were not limited to irb->layer_count, so we could
render off the end of the texture.
V2: Restore the MAX2() to account for zero depth/layer_count.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 77d55ef481)
Fixing the same issues the previous commit does for Gen7.
Note that I can't test this one, since I don't have a Broadwell.
V2: Restore the MAX2() to account for zero depth/layer_count.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 9269ea599c)
There were a few problems here, which mostly just broke layered
rendering into a view:
- Render target view extent was always set to be == depth. This is
benign for non-layered-rendering, but allows writes off the end of the
render target for layered rendering, which ends badly.
- Layered rendering did not honor the mt_layer setting, so would not
properly handle MinLayer being set on a view.
V2: Restore the MAX2() to account for zero depth/layer_count.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit dd43900b7b)
Need to adjust coordinates since the shader receives the array index as
depth in z, but the TEX instruction expects it to be the second
coordinate for a 1D array texture. This fixes fbo-generatemipmap-array.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 8baed87212)
Previously the implication was that queries should be disabled during
blits. However glBlitFramebuffer() is supposed to obey the current
query, and this new bit will indicate that to the driver.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 752ce0affb)
Different textures may be bound to each slot for each stage. So we need
to be able to upload ms parameters for each one without stages
overwriting each other.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 863573b9cb)
The screen takes ownership of the winsys, and is responsible for
destroying it. Users of pipe-loader should make sure they destory
and screens they've created to avoid memory leaks.
This fixes a crash in clover introduced by
ce6c17c083 where the pipe-loader was
destroying the winsys while a screen was still using it.
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit c650033b86)
1c73e919a4 made it possible to not allocate
the tgsi machine if llvm was used. However, draw_get_option_use_llvm() is
not reliable after draw context creation, since drivers can explicitly
request a non-llvm draw context even if draw_get_option_use_llvm() would
return true (and softpipe does just that) which leads to crashes.
Thus use draw->llvm to determine if we're using llvm or not instead (and
make draw->llvm available even if HAVE_LLVM is false so we don't have to put
even more ifdefs).
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 9af68e9b1d)
In an earlier incarnation of populate_consumer_input_sets and
get_matching_input, the consumer_inputs_with_locations array was indexed
using the user-specified location. In that version, only user-defined
varyings were included in the array.
In the current incarnation, the Mesa location is used to index the
array, and built-in varyings are included.
This change fixes the unit test to exepect gl_ClipDistance in the array,
and it resizes the arrays to actually be big enough. It's just dumb
luck that the existing piglit tests use small enough locations to not
stomp the stack. :(
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78258
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Cc: Vinson Lee <vlee@freedesktop.org>
(cherry picked from commit f7bf37cb13)
This path is used to implement both glClear and glClearBuffer; the
latter is only supposed to clear particular buffers. Core Mesa provides
us that information in the buffers bitmask; we must only clear buffers
mentioned there.
To accomplish this, we save/restore the color draw buffers state, and
use glDrawBuffers to restrict drawing to the relevant buffers.
Fixes Piglit's spec/!OpenGL 3.0/clearbuffer-mixed-formats and
spec/ARB_framebuffer_object/fbo-drawbuffers-none glClearBuffer tests
for drivers using meta clears (such as Broadwell).
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77852
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77856
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 9701c6984d)
This will be used for saving/restoring the glDrawBuffers state.
For now, make sure that existing users of MESA_META_ALL don't get
the new bit, since they probably won't want it.
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit e526ebf35c)
The majority of _mesa_meta_Clear and _mesa_meta_glsl_Clear was the same;
adding a boolean for whether to use GLSL allows us to share most of it
without polluting either path too much.
Tested for regressions by hacking i965 to always use the non-GLSL path.
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 7c8df60f31)
Fixes glean/texture_srgb, which hit recursive-flush prevention
assertions in vbo_exec_FlushVertices.
This probably hurts the performance of front buffer rendering, but
very few people in their right mind do front buffer rendering.
Fixes Glean's texture_srgb test.
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit cde8bad1c9)
Prior to commit 8435b60a35, the region
equivalent of this function called intel_miptree_create_layout, which
set mt->target to target. With that commit, it no longer copied target.
Piglit's ext_image_dma_buf_import-sample_[xa]rgb8888 tests would then
hit an assertion failure, where image->TexObject->Target was
GL_TEXTURE_EXTERNAL_OES, and mt->target was GL_TEXTURE_2D.
Copying the target fixes this assertion failure.
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 829cb0423d)
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
