Prepare changelog for upload

with 04_cleanup-osmesa-configs.patch renamed into 04_debian-configs.patch

.gitattributes

@@ -1,4 +0,0 @@
-*.dsp -crlf
-*.dsw -crlf
-*.sln -crlf
-*.vcproj -crlf

.gitignore

@@ -1,16 +0,0 @@
-*.a
-*.o
-*.so
-*.sw[a-z]
-*.pc
-*~
-depend
-depend.bak
-lib
-lib64
-configure
-autom4te.cache
-aclocal.m4
-config.log
-config.status
-cscope*

Makefile

@@ -14,25 +14,25 @@ default: $(TOP)/configs/current
 
 
 doxygen:
-	cd doxygen && $(MAKE)
+	(cd doxygen ; make) ; \
 
 clean:
-	-@touch $(TOP)/configs/current
-	-@for dir in $(SUBDIRS) ; do \
+	@for dir in $(SUBDIRS) ; do \
 		if [ -d $$dir ] ; then \
 			(cd $$dir && $(MAKE) clean) ; \
 		fi \
 	done
-	-@test -s $(TOP)/configs/current || rm -f $(TOP)/configs/current
 
 
-realclean: clean
+realclean:
+	touch $(TOP)/configs/current
+	$(MAKE) clean
 	-rm -rf lib*
 	-rm -f $(TOP)/configs/current
-	-rm -f $(TOP)/configs/autoconf
-	-rm -rf autom4te.cache
-	-find . '(' -name '*.o' -o -name '*.a' -o -name '*.so' -o \
-	  -name depend -o -name depend.bak ')' -exec rm -f '{}' ';'
+	-rm -f `find . -name \*.o`
+	-rm -f `find . -name \*.a`
+	-rm -f `find . -name \*.so`
+	-rm -f `find . -name depend`
 
 
 
@@ -48,20 +48,14 @@ install:
 linux-directfb-install:
 	cd src/mesa/drivers/directfb && $(MAKE) install
 
-.PHONY: default doxygen clean realclean install linux-directfb-install
-
 # If there's no current configuration file
 $(TOP)/configs/current:
 	@echo
 	@echo
 	@echo "Please choose a configuration from the following list:"
-	@ls -1 $(TOP)/configs | grep -v "current\|default\|CVS\|autoconf.*"
+	@ls -1 $(TOP)/configs | grep -v "current\|default\|CVS"
 	@echo
 	@echo "Then type 'make <config>' (ex: 'make linux-x86')"
-	@echo
-	@echo "Or, run './configure' then 'make'"
-	@echo "See './configure --help' for details"
-	@echo
 	@echo "(ignore the following error message)"
 	@exit 1
 
@@ -72,20 +66,24 @@ aix-64 \
 aix-64-static \
 aix-gcc \
 aix-static \
-autoconf \
+beos \
 bluegene-osmesa \
 bluegene-xlc-osmesa \
-beos \
 catamount-osmesa-pgi \
 darwin \
 darwin-fat-32bit \
 darwin-fat-all \
 darwin-static \
 darwin-static-x86ppc \
+dragonfly \
+dragonfly-dri \
+dragonfly-dri-amd64 \
+dragonfly-dri-x86 \
 freebsd \
 freebsd-dri \
 freebsd-dri-amd64 \
 freebsd-dri-x86 \
+freebsd-static \
 hpux10 \
 hpux10-gcc \
 hpux10-static \
@@ -174,26 +172,17 @@ ultrix-gcc:
 
 # Rules for making release tarballs
 
-VERSION=7.4-rc2
-DIRECTORY = Mesa-$(VERSION)
-LIB_NAME = MesaLib-$(VERSION)
-DEMO_NAME = MesaDemos-$(VERSION)
-GLUT_NAME = MesaGLUT-$(VERSION)
+DIRECTORY = Mesa-7.0.4
+LIB_NAME = MesaLib-7.0.4
+DEMO_NAME = MesaDemos-7.0.4
+GLUT_NAME = MesaGLUT-7.0.4
 
 MAIN_FILES = \
 	$(DIRECTORY)/Makefile*						\
-	$(DIRECTORY)/configure						\
-	$(DIRECTORY)/configure.ac					\
-	$(DIRECTORY)/acinclude.m4					\
-	$(DIRECTORY)/aclocal.m4						\
 	$(DIRECTORY)/descrip.mms					\
 	$(DIRECTORY)/mms-config.					\
-	$(DIRECTORY)/bin/config.guess					\
-	$(DIRECTORY)/bin/config.sub					\
-	$(DIRECTORY)/bin/install-sh					\
 	$(DIRECTORY)/bin/mklib						\
 	$(DIRECTORY)/bin/minstall					\
-	$(DIRECTORY)/bin/version.mk					\
 	$(DIRECTORY)/configs/[a-z]*					\
 	$(DIRECTORY)/docs/*.html					\
 	$(DIRECTORY)/docs/COPYING					\
@@ -201,7 +190,9 @@ MAIN_FILES = \
 	$(DIRECTORY)/docs/RELNOTES*					\
 	$(DIRECTORY)/docs/*.spec					\
 	$(DIRECTORY)/include/GL/internal/glcore.h			\
+	$(DIRECTORY)/include/GL/amesa.h					\
 	$(DIRECTORY)/include/GL/dmesa.h					\
+	$(DIRECTORY)/include/GL/fxmesa.h				\
 	$(DIRECTORY)/include/GL/ggimesa.h				\
 	$(DIRECTORY)/include/GL/gl.h					\
 	$(DIRECTORY)/include/GL/glext.h					\
@@ -216,52 +207,64 @@ MAIN_FILES = \
 	$(DIRECTORY)/include/GL/mglmesa.h				\
 	$(DIRECTORY)/include/GL/osmesa.h				\
 	$(DIRECTORY)/include/GL/svgamesa.h				\
+	$(DIRECTORY)/include/GL/ugl*.h					\
 	$(DIRECTORY)/include/GL/vms_x_fix.h				\
 	$(DIRECTORY)/include/GL/wmesa.h					\
+	$(DIRECTORY)/include/GL/xmesa.h					\
+	$(DIRECTORY)/include/GL/xmesa_x.h				\
+	$(DIRECTORY)/include/GL/xmesa_xf86.h				\
+	$(DIRECTORY)/include/GLView.h					\
 	$(DIRECTORY)/src/Makefile					\
 	$(DIRECTORY)/src/descrip.mms					\
 	$(DIRECTORY)/src/mesa/Makefile*					\
 	$(DIRECTORY)/src/mesa/sources					\
 	$(DIRECTORY)/src/mesa/descrip.mms				\
 	$(DIRECTORY)/src/mesa/gl.pc.in					\
-	$(DIRECTORY)/src/mesa/osmesa.pc.in				\
 	$(DIRECTORY)/src/mesa/depend					\
 	$(DIRECTORY)/src/mesa/main/*.[chS]				\
 	$(DIRECTORY)/src/mesa/main/descrip.mms				\
+	$(DIRECTORY)/src/mesa/main/sources				\
 	$(DIRECTORY)/src/mesa/glapi/*.[chS]				\
 	$(DIRECTORY)/src/mesa/glapi/descrip.mms				\
+	$(DIRECTORY)/src/mesa/glapi/sources				\
 	$(DIRECTORY)/src/mesa/math/*.[ch]				\
 	$(DIRECTORY)/src/mesa/math/descrip.mms				\
+	$(DIRECTORY)/src/mesa/math/sources				\
 	$(DIRECTORY)/src/mesa/shader/*.[ch]				\
 	$(DIRECTORY)/src/mesa/shader/descrip.mms			\
+	$(DIRECTORY)/src/mesa/shader/sources				\
 	$(DIRECTORY)/src/mesa/shader/grammar/*.[ch]			\
 	$(DIRECTORY)/src/mesa/shader/grammar/descrip.mms		\
+	$(DIRECTORY)/src/mesa/shader/grammar/sources			\
 	$(DIRECTORY)/src/mesa/shader/slang/*.[ch]			\
 	$(DIRECTORY)/src/mesa/shader/slang/descrip.mms			\
+	$(DIRECTORY)/src/mesa/shader/slang/sources			\
 	$(DIRECTORY)/src/mesa/shader/slang/library/*.[ch]		\
 	$(DIRECTORY)/src/mesa/shader/slang/library/*.gc			\
 	$(DIRECTORY)/src/mesa/shader/slang/library/*.syn		\
 	$(DIRECTORY)/src/mesa/shader/slang/library/Makefile		\
 	$(DIRECTORY)/src/mesa/swrast/*.[ch]				\
 	$(DIRECTORY)/src/mesa/swrast/descrip.mms			\
+	$(DIRECTORY)/src/mesa/swrast/sources				\
 	$(DIRECTORY)/src/mesa/swrast_setup/*.[ch]			\
 	$(DIRECTORY)/src/mesa/swrast_setup/descrip.mms			\
+	$(DIRECTORY)/src/mesa/swrast_setup/sources			\
 	$(DIRECTORY)/src/mesa/vbo/*.[chS]				\
 	$(DIRECTORY)/src/mesa/vbo/descrip.mms				\
 	$(DIRECTORY)/src/mesa/tnl/*.[chS]				\
 	$(DIRECTORY)/src/mesa/tnl/descrip.mms				\
+	$(DIRECTORY)/src/mesa/tnl/sources				\
 	$(DIRECTORY)/src/mesa/tnl_dd/*.[ch]				\
 	$(DIRECTORY)/src/mesa/tnl_dd/imm/*.[ch]				\
 	$(DIRECTORY)/src/mesa/tnl_dd/imm/NOTES.imm			\
-	$(DIRECTORY)/src/mesa/drivers/Makefile				\
 	$(DIRECTORY)/src/mesa/drivers/beos/*.cpp			\
 	$(DIRECTORY)/src/mesa/drivers/beos/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/common/*.[ch]			\
 	$(DIRECTORY)/src/mesa/drivers/common/descrip.mms		\
+	$(DIRECTORY)/src/mesa/drivers/common/sources			\
 	$(DIRECTORY)/src/mesa/drivers/directfb/*.[ch]			\
 	$(DIRECTORY)/src/mesa/drivers/directfb/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/dos/*.[chS]			\
-	$(DIRECTORY)/src/mesa/drivers/fbdev/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/fbdev/glfbdev.c			\
 	$(DIRECTORY)/src/mesa/drivers/glide/*.[ch]			\
 	$(DIRECTORY)/src/mesa/drivers/ggi/*.[ch]			\
@@ -271,7 +274,6 @@ MAIN_FILES = \
 	$(DIRECTORY)/src/mesa/drivers/ggi/display/*.c			\
 	$(DIRECTORY)/src/mesa/drivers/ggi/display/fbdev.conf.in		\
 	$(DIRECTORY)/src/mesa/drivers/ggi/include/ggi/mesa/*.h		\
-	$(DIRECTORY)/src/mesa/drivers/osmesa/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/osmesa/Makefile.win		\
 	$(DIRECTORY)/src/mesa/drivers/osmesa/descrip.mms		\
 	$(DIRECTORY)/src/mesa/drivers/osmesa/osmesa.def			\
@@ -279,11 +281,9 @@ MAIN_FILES = \
 	$(DIRECTORY)/src/mesa/drivers/svga/*.[ch]			\
 	$(DIRECTORY)/src/mesa/drivers/windows/*/*.[ch]			\
 	$(DIRECTORY)/src/mesa/drivers/windows/*/*.def			\
-	$(DIRECTORY)/src/mesa/drivers/x11/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/x11/descrip.mms			\
+	$(DIRECTORY)/src/mesa/drivers/x11/sources			\
 	$(DIRECTORY)/src/mesa/drivers/x11/*.[ch]			\
-	$(DIRECTORY)/src/mesa/drivers/glslcompiler/Makefile		\
-	$(DIRECTORY)/src/mesa/drivers/glslcompiler/glslcompiler.c	\
 	$(DIRECTORY)/src/mesa/ppc/*.[ch]				\
 	$(DIRECTORY)/src/mesa/sparc/*.[chS]				\
 	$(DIRECTORY)/src/mesa/x86/Makefile				\
@@ -299,19 +299,24 @@ MAIN_FILES = \
 	$(DIRECTORY)/vms/analyze_map.com				\
 	$(DIRECTORY)/vms/xlib.opt					\
 	$(DIRECTORY)/vms/xlib_share.opt					\
-	$(DIRECTORY)/windows/VC8/
+	$(DIRECTORY)/windows/VC8/mesa/mesa.sln				\
+	$(DIRECTORY)/windows/VC8/mesa/gdi/gdi.vcproj			\
+	$(DIRECTORY)/windows/VC8/mesa/glu/glu.vcproj			\
+	$(DIRECTORY)/windows/VC8/mesa/mesa/mesa.vcproj			\
+	$(DIRECTORY)/windows/VC8/mesa/osmesa/osmesa.vcproj		\
+	$(DIRECTORY)/windows/VC8/progs/progs.sln			\
+	$(DIRECTORY)/windows/VC8/progs/demos/gears.vcproj		\
+	$(DIRECTORY)/windows/VC8/progs/glut/glut.vcproj
 
 
 DRI_FILES = \
 	$(DIRECTORY)/include/GL/internal/dri_interface.h		\
-	$(DIRECTORY)/include/GL/internal/glcore.h			\
 	$(DIRECTORY)/include/GL/internal/sarea.h			\
 	$(DIRECTORY)/src/glx/Makefile					\
 	$(DIRECTORY)/src/glx/x11/Makefile				\
 	$(DIRECTORY)/src/glx/x11/*.[ch]					\
 	$(DIRECTORY)/src/mesa/drivers/dri/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/dri/Makefile.template		\
-	$(DIRECTORY)/src/mesa/drivers/dri/dri.pc.in			\
 	$(DIRECTORY)/src/mesa/drivers/dri/common/xmlpool/*.[ch]		\
 	$(DIRECTORY)/src/mesa/drivers/dri/common/xmlpool/*.po		\
 	$(DIRECTORY)/src/mesa/drivers/dri/*/*.[chS]			\
@@ -330,8 +335,6 @@ SGI_GLU_FILES = \
 	$(DIRECTORY)/src/glu/sgi/glu.def				\
 	$(DIRECTORY)/src/glu/sgi/dummy.cc				\
 	$(DIRECTORY)/src/glu/sgi/descrip.mms				\
-	$(DIRECTORY)/src/glu/sgi/glu.exports				\
-	$(DIRECTORY)/src/glu/sgi/glu.exports.darwin			\
 	$(DIRECTORY)/src/glu/sgi/mesaglu.opt				\
 	$(DIRECTORY)/src/glu/sgi/include/gluos.h			\
 	$(DIRECTORY)/src/glu/sgi/libnurbs/interface/*.h			\
@@ -387,8 +390,7 @@ DEMO_FILES = \
 	$(DIRECTORY)/progs/samples/*.c			\
 	$(DIRECTORY)/progs/glsl/Makefile*		\
 	$(DIRECTORY)/progs/glsl/*.c			\
-	$(DIRECTORY)/progs/glsl/*.frag			\
-	$(DIRECTORY)/progs/glsl/*.vert			\
+	$(DIRECTORY)/progs/glsl/*.txt			\
 	$(DIRECTORY)/progs/windml/Makefile.ugl		\
 	$(DIRECTORY)/progs/windml/*.c			\
 	$(DIRECTORY)/progs/windml/*.bmp			\
@@ -438,20 +440,9 @@ LIB_FILES = $(MAIN_FILES) $(DRI_FILES) $(SGI_GLU_FILES) $(GLW_FILES)
 
 
 # Everything for new a Mesa release:
-tarballs: rm_depend configure aclocal.m4 lib_gz demo_gz glut_gz \
-	lib_bz2 demo_bz2 glut_bz2 lib_zip demo_zip glut_zip md5
+tarballs: rm_depend lib_gz demo_gz glut_gz lib_bz2 demo_bz2 glut_bz2 lib_zip demo_zip glut_zip md5
 
 
-# Helper for autoconf builds
-ACLOCAL = aclocal
-ACLOCAL_FLAGS =
-AUTOCONF = autoconf
-AC_FLAGS =
-aclocal.m4: configure.ac acinclude.m4
-	$(ACLOCAL) $(ACLOCAL_FLAGS)
-configure: configure.ac aclocal.m4 acinclude.m4
-	$(AUTOCONF) $(AC_FLAGS)
-
 rm_depend:
 	@for dep in $(DEPEND_FILES) ; do \
 		rm -f $$dep ; \
@@ -460,7 +451,6 @@ rm_depend:
 
 lib_gz:
 	rm -f configs/current ; \
-	rm -f configs/autoconf ; \
 	cd .. ; \
 	tar -cf $(LIB_NAME).tar $(LIB_FILES) ; \
 	gzip $(LIB_NAME).tar ; \
@@ -480,7 +470,6 @@ glut_gz:
 
 lib_bz2:
 	rm -f configs/current ; \
-	rm -f configs/autoconf ; \
 	cd .. ; \
 	tar -cf $(LIB_NAME).tar $(LIB_FILES) ; \
 	bzip2 $(LIB_NAME).tar ; \
@@ -500,7 +489,6 @@ glut_bz2:
 
 lib_zip:
 	rm -f configs/current ; \
-	rm -f configs/autoconf ; \
 	rm -f $(LIB_NAME).zip ; \
 	cd .. ; \
 	zip -qr $(LIB_NAME).zip $(LIB_FILES) ; \
@@ -528,6 +516,3 @@ md5:
 	@-md5sum $(GLUT_NAME).tar.gz
 	@-md5sum $(GLUT_NAME).tar.bz2
 	@-md5sum $(GLUT_NAME).zip
-
-.PHONY: tarballs rm_depend lib_gz demo_gz glut_gz lib_bz2 demo_bz2 \
-	glut_bz2 lib_zip demo_zip glut_zip md5

acinclude.m4

@@ -1,119 +0,0 @@
-# A few convenience macros for Mesa, mostly to keep all the platform
-# specifics out of configure.ac.
-
-# MESA_PIC_FLAGS()
-#
-# Find out whether to build PIC code using the option --enable-pic and
-# the configure enable_static/enable_shared settings. If PIC is needed,
-# figure out the necessary flags for the platform and compiler.
-#
-# The platform checks have been shamelessly taken from libtool and
-# stripped down to just what's needed for Mesa. See _LT_COMPILER_PIC in
-# /usr/share/aclocal/libtool.m4 or
-# http://git.savannah.gnu.org/gitweb/?p=libtool.git;a=blob;f=libltdl/m4/libtool.m4;hb=HEAD
-#
-AC_DEFUN([MESA_PIC_FLAGS],
-[AC_REQUIRE([AC_PROG_CC])dnl
-AC_ARG_VAR([PIC_FLAGS], [compiler flags for PIC code])
-AC_ARG_ENABLE([pic],
-    [AS_HELP_STRING([--disable-pic],
-        [compile PIC objects @<:@default=enabled for shared builds
-        on supported platforms@:>@])],
-    [enable_pic="$enableval"
-    test "x$enable_pic" = x && enable_pic=auto],
-    [enable_pic=auto])
-# disable PIC by default for static builds
-if test "$enable_pic" = auto && test "$enable_static" = yes; then
-    enable_pic=no
-fi
-# if PIC hasn't been explicitly disabled, try to figure out the flags
-if test "$enable_pic" != no; then
-    AC_MSG_CHECKING([for $CC option to produce PIC])
-    # allow the user's flags to override
-    if test "x$PIC_FLAGS" = x; then
-        # see if we're using GCC
-        if test "x$GCC" = xyes; then
-            case "$host_os" in
-            aix*|beos*|cygwin*|irix5*|irix6*|osf3*|osf4*|osf5*)
-                # PIC is the default for these OSes.
-                ;;
-            mingw*|os2*|pw32*)
-                # This hack is so that the source file can tell whether
-                # it is being built for inclusion in a dll (and should
-                # export symbols for example).
-                PIC_FLAGS="-DDLL_EXPORT"
-                ;;
-            darwin*|rhapsody*)
-                # PIC is the default on this platform
-                # Common symbols not allowed in MH_DYLIB files
-                PIC_FLAGS="-fno-common"
-                ;;
-            hpux*)
-                # PIC is the default for IA64 HP-UX and 64-bit HP-UX,
-                # but not for PA HP-UX.
-                case $host_cpu in
-                hppa*64*|ia64*)
-                    ;;
-                *)
-                    PIC_FLAGS="-fPIC"
-                    ;;
-                esac
-                ;;
-            *)
-                # Everyone else on GCC uses -fPIC
-                PIC_FLAGS="-fPIC"
-                ;;
-            esac
-        else # !GCC
-            case "$host_os" in
-            hpux9*|hpux10*|hpux11*)
-                # PIC is the default for IA64 HP-UX and 64-bit HP-UX,
-                # but not for PA HP-UX.
-                case "$host_cpu" in
-                hppa*64*|ia64*)
-                    # +Z the default
-                    ;;
-                *)
-                    PIC_FLAGS="+Z"
-                    ;;
-                esac
-                ;;
-            linux*|k*bsd*-gnu)
-                case `basename "$CC"` in
-                icc*|ecc*|ifort*)
-                    PIC_FLAGS="-KPIC"
-                    ;;
-                pgcc*|pgf77*|pgf90*|pgf95*)
-                    # Portland Group compilers (*not* the Pentium gcc
-                    # compiler, which looks to be a dead project)
-                    PIC_FLAGS="-fpic"
-                    ;;
-                ccc*)
-                    # All Alpha code is PIC.
-                    ;;
-                xl*)
-                    # IBM XL C 8.0/Fortran 10.1 on PPC
-                    PIC_FLAGS="-qpic"
-                    ;;
-                *)
-                    case `$CC -V 2>&1 | sed 5q` in
-                    *Sun\ C*|*Sun\ F*)
-                        # Sun C 5.9 or Sun Fortran
-                        PIC_FLAGS="-KPIC"
-                        ;;
-                    esac
-                esac
-                ;;
-            solaris*)
-                PIC_FLAGS="-KPIC"
-                ;;
-            sunos4*)
-                PIC_FLAGS="-PIC"
-                ;;
-            esac
-        fi # GCC
-    fi # PIC_FLAGS
-    AC_MSG_RESULT([$PIC_FLAGS])
-fi
-AC_SUBST([PIC_FLAGS])
-])# MESA_PIC_FLAGS

autogen.sh

@@ -1,16 +0,0 @@
-#! /bin/sh
-
-srcdir=`dirname "$0"`
-test -z "$srcdir" && srcdir=.
-
-SRCDIR=`(cd "$srcdir" && pwd)`
-ORIGDIR=`pwd`
-
-if test "x$SRCDIR" != "x$ORIGDIR"; then
-	echo "Mesa cannot be built when srcdir != builddir" 1>&2
-	exit 1
-fi
-
-autoreconf -v --install || exit 1
-
-"$srcdir"/configure "$@"

bin/confdiff.sh

@@ -1,48 +0,0 @@
-#!/bin/bash -e
-
-usage()
-{
-	echo "Usage: $0 <target1> <target2>"
-	echo "Highlight differences between Mesa configs"
-	echo "Example:"
-	echo "  $0 linux linux-x86"
-}
-
-die()
-{
-	echo "$@" >&2
-	return 1
-}
-
-case "$1" in
--h|--help) usage; exit 0;;
-esac
-
-[ $# -lt 2 ] && die 2 targets needed. See $0 --help
-target1=$1
-target2=$2
-
-topdir=$(cd "`dirname $0`"/..; pwd)
-cd "$topdir"
-
-[ -f "./configs/$target1" ] || die Missing configs/$target1
-[ -f "./configs/$target2" ] || die Missing configs/$target2
-
-trap 'rm -f "$t1" "$t2"' 0
-
-t1=$(mktemp)
-t2=$(mktemp)
-
-make -f- -n -p <<EOF | sed '/^# Not a target/,/^$/d' > $t1
-TOP = .
-include \$(TOP)/configs/$target1
-default:
-EOF
-
-make -f- -n -p <<EOF | sed '/^# Not a target/,/^$/d' > $t2
-TOP = .
-include \$(TOP)/configs/$target2
-default:
-EOF
-
-diff -pu -I'^#' $t1 $t2

bin/install-sh

@@ -1 +0,0 @@
-minstall

bin/minstall

@@ -42,8 +42,6 @@ if [ $# -ge 2 ] ; then
 			exit 0
 		fi
 
-		PWDSAVE=`pwd`
-
 		# determine file's type
 		if [ -h "$FILE" ] ; then
 			#echo $FILE is a symlink
@@ -59,6 +57,7 @@ if [ $# -ge 2 ] ; then
 
 			FILE=`basename "$FILE"`
 			# Go to $DEST and make the link
+			PWDSAVE="$PWD"
 			cd "$DEST"        # pushd
 				$RM "$FILE"
 				$SYMLINK "$TARGET" "$FILE"

bin/mklib

@@ -43,7 +43,7 @@ ARCH="auto"
 ARCHOPT=""
 NOPREFIX=0
 EXPORTS=""
-ID=""
+
 
 #
 # Parse arguments
@@ -61,8 +61,7 @@ do
 	    echo '  -minor N      specifies minor version number (default is 0)'
 	    echo '  -patch N      specifies patch version number (default is 0)'
 	    echo '  -lLIBRARY     specifies a dependency on LIBRARY'
-	    echo '  -LDIR         search in DIR for library dependencies at build time'
-	    echo '  -RDIR         search in DIR for library dependencies at run time'
+	    echo '  -LDIR         search in DIR for library dependencies'
 	    echo '  -linker L     explicity specify the linker program to use (eg: gcc, g++)'
 	    echo '                Not observed on all systems at this time.'
 	    echo '  -ldflags OPT  specify any additional linker flags in OPT'
@@ -75,7 +74,6 @@ do
 	    echo '  -altopts OPTS alternate options to override all others'
 	    echo "  -noprefix     don't prefix library name with 'lib' nor add any suffix"
 	    echo '  -exports FILE only export the symbols listed in FILE'
-	    echo '  -id NAME      Sets the id of the dylib (Darwin)'
 	    echo '  -h, --help    display this information and exit'
 	    exit 1
 	    ;;
@@ -109,14 +107,15 @@ do
 	-L*)
 	    DEPS="$DEPS $1"
 	    ;;
-	-R*)
+	-pthread)
+	    # this is a special case (see bugzilla 10876)
+	    DEPS="$DEPS $1"
+	    ;;
+	-Wl*)
+	    # Another special case for DragonFly
 	    DEPS="$DEPS $1"
 	    ;;
 	-Wl*)
-            DEPS="$DEPS $1"
-            ;;
-	-pthread)
-	    # this is a special case (see bugzilla 10876)
 	    DEPS="$DEPS $1"
 	    ;;
 	'-pthread')
@@ -154,10 +153,6 @@ do
 	    shift 1;
 	    EXPORTS=$1
 	    ;;
-	'-id')
-	    shift 1;
-	    ID=$1
-	    ;;
 	-*)
 	    echo "mklib: Unknown option: " $1 ;
 	    exit 1
@@ -201,7 +196,6 @@ if [  ]  ; then
     echo PATCH is $PATCH
     echo DEPS are $DEPS
     echo "EXPORTS in" $EXPORTS
-    echo ID is $ID
     echo "-----------------"
 fi
 
@@ -260,31 +254,9 @@ case $ARCH in
                 OPTS=${ALTOPTS}
             fi
             rm -f ${LIBNAME}
-
-	    # expand any .a objects into constituent .o files.
-	    NEWOBJECTS=""
-	    DELETIA=""
-	    for OBJ in ${OBJECTS} ; do
-		if [ `expr match $OBJ '.*\.a'` -gt 0 ] ; then
-		    # extract the .o files from this .a archive
-		    FILES=`ar t $OBJ`
-		    ar x $OBJ
-		    NEWOBJECTS="$NEWOBJECTS $FILES"
-		    # keep track of temporary .o files and delete them below
-		    DELETIA="$DELETIA $FILES"
-		else
-		    # ordinary .o file
-		    NEWOBJECTS="$NEWOBJECTS $OBJ"
-		fi
-	    done
-
             # make lib
-            ${LINK} ${OPTS} ${LIBNAME} ${NEWOBJECTS}
+            ${LINK} ${OPTS} ${LIBNAME} ${OBJECTS}
             ranlib ${LIBNAME}
-
-	    # remove temporary extracted .o files
-	    rm -f ${DELETIA}
-
             # finish up
             FINAL_LIBS=${LIBNAME}
         else
@@ -299,7 +271,7 @@ case $ARCH in
 	    if [ $EXPORTS ] ; then
 		#OPTS="${OPTS} -Xlinker --retain-symbols-file ${EXPORTS}"
 		# Make the 'exptmp' file for --version-script option
-		echo "{" > exptmp
+		echo "VERSION_${MAJOR}.${MINOR} {" > exptmp
 		echo "global:" >> exptmp
 		sed 's/$/;/' ${EXPORTS} >> exptmp
 		echo "local:" >> exptmp
@@ -368,7 +340,7 @@ case $ARCH in
 			# use g++
 			LINK="g++"
 		    else
-			echo "mklib: warning: can't find C++ compiler, trying CC."
+			echo "mklib: warning: can't find C++ comiler, trying CC."
 			LINK="CC"
 		    fi
 		else
@@ -394,55 +366,27 @@ case $ARCH in
 		fi
 	    fi
 
-	    # If using Sun C++ compiler, need to tell it not to add runpaths
-	    # that are specific to the build machine
-	    if [ ${LINK} = "CC" ] ; then
-		OPTS="${OPTS} -norunpath"
-	    fi
-
-	    # Solaris linker requires explicitly listing the Standard C & C++
-	    # libraries in the link path when building shared objects
-	    if [ ${LINK} = "CC" ] ; then
-		DEPS="${DEPS} -lCrun"
-	    fi
-	    DEPS="${DEPS} -lc"
-
-	    if [ $EXPORTS ] ; then
-		# Make the 'mapfile.scope' linker mapfile
-		echo "{" > mapfile.scope
-		echo "global:" >> mapfile.scope
-		sed 's/$/;/' ${EXPORTS} >> mapfile.scope
-		echo "local:" >> mapfile.scope
-		echo "    *;" >> mapfile.scope
-		echo "};" >> mapfile.scope
-		OPTS="${OPTS} -Wl,-Mmapfile.scope"
-	    fi
-
 	    # Check if objects are SPARC v9
 	    # file says: ELF 64-bit MSB relocatable SPARCV9 Version 1
 	    set ${OBJECTS}
-	    if [ ${LINK} = "cc" -o ${LINK} = "CC" ] ; then
-		SPARCV9=`file $1 | grep SPARCV9`
-		if [ "${SPARCV9}" ] ; then
-		    OPTS="${OPTS} -xarch=v9"
-		fi
+	    SPARCV9=`file $1 | grep SPARCV9`
+	    if [ "${SPARCV9}" ] ; then
+		OPTS="${OPTS} -xarch=v9"
 	    fi
             if [ "${ALTOPTS}" ] ; then
                 OPTS=${ALTOPTS}
             fi
-
 	    # for debug:
 	    #echo "mklib: linker is" ${LINK} ${OPTS}
 	    if [ $NOPREFIX = 1 ] ; then
 		rm -f ${LIBNAME}
 		${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
-		FINAL_LIBS="${LIBNAME}"
 	    else
 		rm -f ${LIBNAME}.${MAJOR} ${LIBNAME}
-		${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME}.${MAJOR} -h ${LIBNAME}.${MAJOR} ${OBJECTS} ${DEPS}
+		${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME}.${MAJOR} ${OBJECTS} ${DEPS}
 		ln -s ${LIBNAME}.${MAJOR} ${LIBNAME}
-		FINAL_LIBS="${LIBNAME}.${MAJOR} ${LIBNAME}"
 	    fi
+	    FINAL_LIBS="${LIBNAME}.${MAJOR} ${LIBNAME}"
 	fi
 	;;
 
@@ -684,19 +628,13 @@ case $ARCH in
                 LIBSUFFIX="bundle"
                 OPTS="${ARCHOPT} -bundle -multiply_defined suppress"
             else
-                LIBSUFFIX="dylib"
-                if [ -z "$ID" ] ; then
-                    ID="lib${LIBNAME}.${MAJOR}.${LIBSUFFIX}"
-                fi
-                OPTS="${ARCHOPT} -dynamiclib -multiply_defined suppress -current_version ${MAJOR}.${MINOR}.0 -compatibility_version ${MAJOR}.${MINOR}.0 -install_name ${ID}"
+		LIBSUFFIX="dylib"
+                OPTS="${ARCHOPT} -dynamiclib -multiply_defined suppress -current_version ${MAJOR}.${MINOR}.0 -compatibility_version ${MAJOR}.${MINOR}.0 -install_name lib${LIBNAME}.${MAJOR}.${LIBSUFFIX}"
             fi
 
             if [ ${EXPORTS} ] ; then
-                if [ -f ${EXPORTS}".darwin" ] ; then
-                    EXPORTS=$EXPORTS".darwin"
-                fi
                 OPTS="${OPTS} -exported_symbols_list ${EXPORTS}"
-            fi
+            fi 
 
             LINKNAME="lib${LIBNAME}.${MAJOR}.${LIBSUFFIX}"
             LINKNAME2="lib${LIBNAME}.${LIBSUFFIX}"

bin/version.mk

@@ -1,17 +0,0 @@
-#!/usr/bin/make -sf
-# Print the various Mesa version fields. This is mostly used to add the
-# version to configure.
-
-# This reflects that this script is usually called from the toplevel
-TOP = .
-
-include $(TOP)/configs/default
-
-version:
-	@echo $(MESA_VERSION)
-major:
-	@echo $(MESA_MAJOR)
-minor:
-	@echo $(MESA_MINOR)
-tiny:
-	@echo $(MESA_TINY)

configs/.gitignore

@@ -1,2 +0,0 @@
-current
-autoconf

configs/autoconf.in

@@ -1,125 +0,0 @@
-# Autoconf configuration
-
-# Pull in the defaults
-include $(TOP)/configs/default
-
-# This is generated by configure
-CONFIG_NAME = autoconf
-
-# Compiler and flags
-CC = @CC@
-CXX = @CXX@
-OPT_FLAGS = @OPT_FLAGS@
-ARCH_FLAGS = @ARCH_FLAGS@
-ASM_FLAGS = @ASM_FLAGS@
-PIC_FLAGS = @PIC_FLAGS@
-DEFINES = @DEFINES@
-CFLAGS = @CPPFLAGS@ @CFLAGS@ \
-	$(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(ASM_FLAGS) $(DEFINES)
-CXXFLAGS = @CPPFLAGS@ @CXXFLAGS@ \
-	$(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
-LDFLAGS = @LDFLAGS@
-EXTRA_LIB_PATH = @EXTRA_LIB_PATH@
-
-# Assembler
-ASM_SOURCES = @ASM_SOURCES@
-ASM_API = @ASM_API@
-
-# Misc tools and flags
-MAKE = @MAKE@
-SHELL = @SHELL@
-MKLIB_OPTIONS = @MKLIB_OPTIONS@
-MKDEP = @MKDEP@
-MKDEP_OPTIONS = @MKDEP_OPTIONS@
-
-# Python and flags (generally only needed by the developers)
-PYTHON2 = python
-PYTHON_FLAGS = -t -O -O
-
-# Library names (base name)
-GL_LIB = GL
-GLU_LIB = GLU
-GLUT_LIB = glut
-GLW_LIB = GLw
-OSMESA_LIB = @OSMESA_LIB@
-
-# Library names (actual file names)
-GL_LIB_NAME = @GL_LIB_NAME@
-GLU_LIB_NAME = @GLU_LIB_NAME@
-GLUT_LIB_NAME = @GLUT_LIB_NAME@
-GLW_LIB_NAME = @GLW_LIB_NAME@
-OSMESA_LIB_NAME = @OSMESA_LIB_NAME@
-
-# Directories to build
-LIB_DIR = @LIB_DIR@
-SRC_DIRS = @SRC_DIRS@
-GLU_DIRS = @GLU_DIRS@
-DRIVER_DIRS = @DRIVER_DIRS@
-# Which subdirs under $(TOP)/progs/ to enter:
-PROGRAM_DIRS = @PROGRAM_DIRS@
-
-# Driver specific build vars
-DRI_DIRS = @DRI_DIRS@
-WINDOW_SYSTEM = @WINDOW_SYSTEM@
-USING_EGL = @USING_EGL@
-
-# Dependencies
-X11_INCLUDES = @X11_INCLUDES@
-
-# GLw motif setup
-GLW_SOURCES = @GLW_SOURCES@
-MOTIF_CFLAGS = @MOTIF_CFLAGS@
-
-# Library/program dependencies
-GL_LIB_DEPS = $(EXTRA_LIB_PATH) @GL_LIB_DEPS@
-OSMESA_LIB_DEPS = -L$(TOP)/$(LIB_DIR) @OSMESA_MESA_DEPS@ \
-	$(EXTRA_LIB_PATH) @OSMESA_LIB_DEPS@
-GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) @GLU_MESA_DEPS@ \
-	$(EXTRA_LIB_PATH) @GLU_LIB_DEPS@
-GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) @GLUT_MESA_DEPS@ \
-	$(EXTRA_LIB_PATH) @GLUT_LIB_DEPS@
-GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) @GLW_MESA_DEPS@ \
-	$(EXTRA_LIB_PATH) @GLW_LIB_DEPS@
-APP_LIB_DEPS = $(EXTRA_LIB_PATH) @APP_LIB_DEPS@
-
-# DRI dependencies
-DRI_LIB_DEPS = $(EXTRA_LIB_PATH) @DRI_LIB_DEPS@
-LIBDRM_CFLAGS = @LIBDRM_CFLAGS@
-LIBDRM_LIB = @LIBDRM_LIBS@
-DRI2PROTO_CFLAGS = @DRI2PROTO_CFLAGS@
-EXPAT_INCLUDES = @EXPAT_INCLUDES@
-
-# Autoconf directories
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-libdir = @libdir@
-includedir = @includedir@
-
-# Installation directories (for make install)
-INSTALL_DIR = $(prefix)
-INSTALL_LIB_DIR = $(libdir)
-INSTALL_INC_DIR = $(includedir)
-
-# DRI installation directories
-DRI_DRIVER_INSTALL_DIR = @DRI_DRIVER_INSTALL_DIR@
-
-# Where libGL will look for DRI hardware drivers
-DRI_DRIVER_SEARCH_DIR = $(DRI_DRIVER_INSTALL_DIR)
-
-# pkg-config substitutions
-GL_PC_REQ_PRIV = @GL_PC_REQ_PRIV@
-GL_PC_LIB_PRIV = @GL_PC_LIB_PRIV@
-GL_PC_CFLAGS = @GL_PC_CFLAGS@
-DRI_PC_REQ_PRIV = @DRI_PC_REQ_PRIV@
-GLU_PC_REQ = @GLU_PC_REQ@
-GLU_PC_REQ_PRIV = @GLU_PC_REQ_PRIV@
-GLU_PC_LIB_PRIV = @GLU_PC_LIB_PRIV@
-GLU_PC_CFLAGS = @GLU_PC_CFLAGS@
-GLUT_PC_REQ_PRIV = @GLUT_PC_REQ_PRIV@
-GLUT_PC_LIB_PRIV = @GLUT_PC_LIB_PRIV@
-GLUT_PC_CFLAGS = @GLUT_PC_CFLAGS@
-GLW_PC_REQ_PRIV = @GLW_PC_REQ_PRIV@
-GLW_PC_LIB_PRIV = @GLW_PC_LIB_PRIV@
-GLW_PC_CFLAGS = @GLW_PC_CFLAGS@
-OSMESA_PC_REQ = @OSMESA_PC_REQ@
-OSMESA_PC_LIB_PRIV = @OSMESA_PC_LIB_PRIV@

configs/config.mgw

@@ -1,42 +0,0 @@
-# MinGW config include file updated for Mesa 7.0
-#
-#  Updated : by Heromyth, on 2007-7-21
-#  Email   : zxpmyth@yahoo.com.cn
-#  Bugs    : 1) All the default settings work fine. But the setting X86=1 can't work. 
-#            The others havn't been tested yet.
-#            2) The generated DLLs are *not* compatible with the ones built
-#            with the other compilers like VC8, especially for GLUT. 
-#            3) Although more tests are needed, it can be used individually!
-
-# The generated DLLs by MingW with STDCALL are not totally compatible 
-# with the ones linked by Microsoft's compilers.
-#
-# xxx_USING_STDCALL = 1          Compiling MESA with __stdcall. This is default!
-# 
-# xxx_USING_STDCALL = 0          Compiling MESA without __stdcall. I like this:)
-#  
-
-# In fact, GL_USING_STDCALL and GLUT_USING_STDCALL can be
-# different. For example:
-#
-#   GL_USING_STDCALL = 0
-#   GLUT_USING_STDCALL = 1
-# 
-# Suggested setting:
-#
-#     ALL_USING_STDCALL = 1
-#
-# That's default!
-#
-
-
-ALL_USING_STDCALL = 1
-
-
-ifeq ($(ALL_USING_STDCALL),1)
-  GL_USING_STDCALL = 1
-  GLUT_USING_STDCALL = 1
-else
-  GL_USING_STDCALL = 0
-  GLUT_USING_STDCALL = 0
-endif

configs/darwin

@@ -4,26 +4,22 @@ include $(TOP)/configs/default
 
 CONFIG_NAME = darwin
 
-INSTALL_DIR = /usr/X11
+DEFINES = -D_DARWIN_C_SOURCE -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L \
+	  -D_SVID_SOURCE -D_BSD_SOURCE -D_GNU_SOURCE \
+	  -DPTHREADS -DGLX_ALIAS_UNSUPPORTED -DGLX_INDIRECT_RENDERING
 
 # Compiler and flags
 CC = gcc
 CXX = gcc
-PIC_FLAGS = -fPIC
-DEFINES =  -D_DARWIN_C_SOURCE -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L \
-	   -D_BSD_SOURCE -D_SVID_SOURCE -D_GNU_SOURCE -DPTHREADS \
-	   -DGLX_ALIAS_UNSUPPORTED -DGLX_INDIRECT_RENDERING
+CFLAGS = -I/usr/X11/include -O3 -fPIC -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin $(DEFINES)
+CXXFLAGS = -I/usr/X11/include -O3 -fPIC -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin $(DEFINES)
 
-# -DGLX_DIRECT_RENDERING - pulls in libdrm stuff in glx/x11
-# -DGLX_USE_APPLEGL      - supposed to be used with GLX_DIRECT_RENDERING to use AGL rather than DRM, but doesn't compile
-# -DIN_DRI_DRIVER
+CFLAGS += $(RC_CFLAGS)
+CXXFLAGS += $(RC_CFLAGS)
 
-ARCH_FLAGS += $(RC_CFLAGS)
-
-CFLAGS =  -ggdb3 -Os -Wall -Wmissing-prototypes -std=c99 -ffast-math -fno-strict-aliasing \
-	-I$(INSTALL_DIR)/include $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(ASM_FLAGS) $(DEFINES)
-CXXFLAGS =  -ggdb3 -Os -Wall -fno-strict-aliasing \
-	-I$(INSTALL_DIR)/include $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(ASM_FLAGS) $(DEFINES)
+# Work around aliasing bugs - developers should comment this out
+CFLAGS += -fno-strict-aliasing
+CXXFLAGS += -fno-strict-aliasing
 
 # Library names (actual file names)
 GL_LIB_NAME = libGL.dylib
@@ -32,24 +28,13 @@ GLUT_LIB_NAME = libglut.dylib
 GLW_LIB_NAME = libGLw.dylib
 OSMESA_LIB_NAME = libOSMesa.dylib
 
-# globs used to install the lib and all symlinks
-GL_LIB_GLOB = libGL.*dylib
-GLU_LIB_GLOB = libGLU.*dylib
-GLUT_LIB_GLOB = libglut.*dylib
-GLW_LIB_GLOB = libGLw.*dylib
-OSMESA_LIB_GLOB = libOSMesa.*dylib
-
-GL_LIB_DEPS = -L$(INSTALL_DIR)/$(LIB_DIR) -lX11 -lXext -lm -lpthread
-OSMESA_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB)
-GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB)
-GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB)  -L$(INSTALL_DIR)/$(LIB_DIR) -lX11 -lXmu -lXi -lXext
-GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -L$(INSTALL_DIR)/$(LIB_DIR) -lX11 -lXt
-APP_LIB_DEPS = -L$(TOP)/lib -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L$(INSTALL_DIR)/$(LIB_DIR) -lX11 -lXmu -lXt -lXi -lm
+GL_LIB_DEPS = -L/usr/X11/lib -lX11 -lXext -lm -lpthread
+OSMESA_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -lGL
+GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -lGL
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -lGL -lGLU -L/usr/X11R6/lib -lX11 -lXmu -lXi -lXext
+GLW_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXt $(TOP)/lib/GL.dylib
+APP_LIB_DEPS = -L$(TOP)/lib -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11/lib -lX11 -lXmu -lXt -lXi -lm
 
 # omit glw lib for now:
-SRC_DIRS = glx/x11 mesa glu glut/glx
-GLU_DIRS = sgi
+SRC_DIRS = glx/x11 glu glut/glx mesa
 DRIVER_DIRS = osmesa
-#DRIVER_DIRS = dri
-DRI_DIRS = swrast
-PROGRAM_DIRS = xdemos

configs/darwin-static

@@ -0,0 +1,28 @@
+# Configuration for Darwin / MacOS X, making static libs
+
+include $(TOP)/configs/darwin
+
+CONFIG_NAME = darwin-static
+
+# Compiler and flags
+CFLAGS = -I/usr/X11R6/include -O3 -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
+CXXFLAGS = -I/usr/X11R6/include -O3 -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
+MKLIB_OPTIONS = -static
+
+# Work around aliasing bugs - developers should comment this out
+CFLAGS += -fno-strict-aliasing
+CXXFLAGS += -fno-strict-aliasing
+
+# Library names (actual file names)
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a
+
+GL_LIB_DEPS =
+OSMESA_LIB_DEPS = 
+GLU_LIB_DEPS = 
+GLUT_LIB_DEPS = 
+GLW_LIB_DEPS = 
+APP_LIB_DEPS = -Wl,-search_paths_first -L$(TOP)/lib -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lstdc++ -lgcc_s.1 -lm

configs/darwin-static-x86ppc

@@ -0,0 +1,30 @@
+# Configuration for Darwin / MacOS X, making static libs
+
+include $(TOP)/configs/darwin
+
+CONFIG_NAME = darwin-static
+
+# Compiler and flags
+CFLAGS = -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk \
+         -I/usr/X11R6/include -O3 -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
+CXXFLAGS = -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk \
+           -I/usr/X11R6/include -O3 -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
+MKLIB_OPTIONS = -static -archopt "-isysroot /Developer/SDKs/MacOSX10.4u.sdk"
+
+# Work around aliasing bugs - developers should comment this out
+CFLAGS += -fno-strict-aliasing
+CXXFLAGS += -fno-strict-aliasing
+
+# Library names (actual file names)
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a
+
+GL_LIB_DEPS =
+OSMESA_LIB_DEPS = 
+GLU_LIB_DEPS = 
+GLUT_LIB_DEPS = 
+GLW_LIB_DEPS = 
+APP_LIB_DEPS = -Wl,-search_paths_first -L$(TOP)/lib -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lstdc++ -lgcc_s.1 -lm

configs/default

@@ -9,9 +9,8 @@ CONFIG_NAME = default
 
 # Version info
 MESA_MAJOR=7
-MESA_MINOR=3
-MESA_TINY=0
-MESA_VERSION = $(MESA_MAJOR).$(MESA_MINOR).$(MESA_TINY)
+MESA_MINOR=0
+MESA_TINY=4
 
 # external projects.  This should be useless now that we use libdrm.
 DRM_SOURCE_PATH=$(TOP)/../drm
@@ -25,13 +24,11 @@ LDFLAGS =
 GLU_CFLAGS = 
 
 # Misc tools and flags
-SHELL = /bin/sh
-MKLIB = $(SHELL) $(TOP)/bin/mklib
 MKLIB_OPTIONS = 
 MKDEP = makedepend
 MKDEP_OPTIONS = -fdepend
 MAKE = make
-INSTALL = $(SHELL) $(TOP)/bin/minstall
+INSTALL = $(TOP)/bin/minstall
 
 # Tools for regenerating glapi (generally only needed by the developers)
 PYTHON2 = python
@@ -54,12 +51,6 @@ GLUT_LIB_NAME = lib$(GLUT_LIB).so
 GLW_LIB_NAME = lib$(GLW_LIB).so
 OSMESA_LIB_NAME = lib$(OSMESA_LIB).so
 
-# globs used to install the lib and all symlinks
-GL_LIB_GLOB = $(GL_LIB_NAME)*
-GLU_LIB_GLOB = $(GLU_LIB_NAME)*
-GLUT_LIB_GLOB = $(GLUT_LIB_NAME)*
-GLW_LIB_GLOB = $(GLW_LIB_NAME)*
-OSMESA_LIB_GLOB = $(OSMESA_LIB_NAME)*
 
 # Optional assembly language optimization files for libGL
 ASM_SOURCES = 
@@ -67,7 +58,6 @@ ASM_SOURCES =
 # GLw widget sources (Append "GLwMDrawA.c" here and add -lXm to GLW_LIB_DEPS in
 # order to build the Motif widget too)
 GLW_SOURCES = GLwDrawA.c
-MOTIF_CFLAGS = -I/usr/include/Motif1.2
 
 
 # Directories to build
@@ -84,36 +74,18 @@ PROGRAM_DIRS = demos redbook samples glsl xdemos
 GL_LIB_DEPS = $(EXTRA_LIB_PATH) -lX11 -lXext -lm -lpthread
 OSMESA_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB)
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lm
-GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) $(EXTRA_LIB_PATH) -lX11 -lXmu -lXi -lm
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) $(EXTRA_LIB_PATH) -lX11 -lXmu -lXt -lXi -lm
 GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) $(EXTRA_LIB_PATH) -lXt -lX11
 
 # Program dependencies - specific GL/glut libraries added in Makefiles
 APP_LIB_DEPS = -lm
 
 
+
 # Installation directories (for make install)
 INSTALL_DIR = /usr/local
-INSTALL_LIB_DIR = $(INSTALL_DIR)/$(LIB_DIR)
-INSTALL_INC_DIR = $(INSTALL_DIR)/include
-DRI_DRIVER_INSTALL_DIR = $(INSTALL_LIB_DIR)/dri
+DRI_DRIVER_INSTALL_DIR = /usr/X11R6/lib/modules/dri
 
 # Where libGL will look for DRI hardware drivers
 DRI_DRIVER_SEARCH_DIR = $(DRI_DRIVER_INSTALL_DIR)
 
-# pkg-config substitutions
-GL_PC_REQ_PRIV =
-GL_PC_LIB_PRIV =
-GL_PC_CFLAGS =
-DRI_PC_REQ_PRIV =
-GLU_PC_REQ = gl
-GLU_PC_REQ_PRIV =
-GLU_PC_LIB_PRIV =
-GLU_PC_CFLAGS =
-GLUT_PC_REQ_PRIV =
-GLUT_PC_LIB_PRIV =
-GLUT_PC_CFLAGS =
-GLW_PC_REQ_PRIV =
-GLW_PC_LIB_PRIV =
-GLW_PC_CFLAGS =
-OSMESA_PC_REQ =
-OSMESA_PC_LIB_PRIV =

configs/dragonfly

@@ -0,0 +1,38 @@
+# Configuration for DragonFly
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = DragonFly
+
+# Compiler and flags
+CC = cc
+CXX = c++
+MAKE = gmake
+
+OPT_FLAGS  = -O2
+PIC_FLAGS  = -fPIC
+
+DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_BSD_SOURCE -DUSE_XSHM \
+	-DHZ=100
+
+X11_INCLUDES = -I/usr/pkg/include
+
+CFLAGS += $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(DEFINES) $(X11_INCLUDES) \
+	-ffast-math -pedantic
+
+CXXFLAGS += $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(DEFINES) $(X11_INCLUDES)
+
+GLUT_CFLAGS = -fexceptions
+
+# Work around aliasing bugs - developers should comment this out
+CFLAGS += -fno-strict-aliasing
+CXXFLAGS += -fno-strict-aliasing
+
+EXTRA_LIB_PATH = -L/usr/pkg/lib
+APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) $(EXTRA_LIB_PATH) -l$(GLUT_LIB) \
+	-l$(GLU_LIB) -l$(GL_LIB) -lXext -lXmu -lXi -lX11 -lm
+
+# Installation directories (for make install)
+INSTALL_DIR = /usr/pkg
+DRI_DRIVER_INSTALL_DIR = /usr/pkg/lib/modules/dri/
+

configs/dragonfly-dri

@@ -0,0 +1,56 @@
+# -*-makefile-*-
+# Configuration for dragonfly-dri: DragonFly DRI hardware drivers
+
+include $(TOP)/configs/dragonfly
+
+CONFIG_NAME = dragonfly-dri
+
+# Compiler and flags
+CC = gcc
+CXX = g++
+WARN_FLAGS = -Wall
+OPT_FLAGS = -O -g
+
+EXPAT_INCLUDES = -I/usr/pkg/include
+X11_INCLUDES = -I/usr/pkg/include
+DEFINES = -DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 -DIN_DRI_DRIVER \
+	-DGLX_DIRECT_RENDERING -DGLX_INDIRECT_RENDERING \
+	-DHAVE_ALIAS
+
+CFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) -Wmissing-prototypes \
+	-std=c99 -Wundef -ffast-math $(ASM_FLAGS) $(X11_INCLUDES) $(DEFINES)
+
+CXXFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(DEFINES) -Wall -ansi \
+	-pedantic $(ASM_FLAGS) $(X11_INCLUDES) 
+
+# Work around aliasing bugs - developers should comment this out
+CFLAGS += -fno-strict-aliasing
+CXXFLAGS += -fno-strict-aliasing
+
+ASM_SOURCES = 
+
+# Library/program dependencies
+LIBDRM_CFLAGS = `pkg-config --cflags libdrm`
+LIBDRM_LIB = `pkg-config --libs libdrm`
+DRI_LIB_DEPS = -L/usr/pkg/lib -lm -lpthread -lexpat $(LIBDRM_LIB)
+GL_LIB_DEPS = -L/usr/pkg/lib -lX11 -lXext -lXxf86vm -lXdamage -lXfixes \
+	-lm -lpthread $(LIBDRM_LIB)
+
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/pkg/lib -lGLU -lGL -lX11 -lXmu \
+	-lXt -lXi -lm
+GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/pkg/lib -lGL -lXt -lX11
+
+
+# Directories
+SRC_DIRS = glx/x11 mesa glu glut/glx glw
+DRIVER_DIRS = dri
+PROGRAM_DIRS = 
+WINDOW_SYSTEM = dri
+
+DRM_SOURCE_PATH = $(TOP)/../drm
+
+# ffb and gamma are missing because they have not been converted to use the new
+# interface.
+DRI_DIRS = i810 i915 i965 mach64 mga r128 r200 r300 radeon tdfx \
+	   unichrome savage sis
+

configs/dragonfly-dri-amd64

@@ -0,0 +1,10 @@
+# -*-makefile-*-
+# Configuration for dragonfly-dri-amd64: DragonFly DRI hardware drivers
+
+include $(TOP)/configs/dragonfly-dri
+
+CONFIG_NAME = dragonfly-dri-x86-64
+
+ASM_FLAGS = -DUSE_X86_64_ASM
+ASM_SOURCES = $(X86-64_SOURCES)
+ASM_API = $(X86-64_API)

configs/dragonfly-dri-x86

@@ -0,0 +1,13 @@
+# -*-makefile-*-
+# Configuration for dragonfly-dri-x86: DragonFly DRI hardware drivers
+
+include $(TOP)/configs/dragonfly-dri
+
+CONFIG_NAME = dragonfly-dri-x86
+
+# Unnecessary on x86, generally.
+PIC_FLAGS = 
+
+ASM_FLAGS = -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM
+ASM_SOURCES = $(X86_SOURCES)
+ASM_API = $(X86_API)

configs/freebsd

@@ -15,7 +15,7 @@ PIC_FLAGS  = -fPIC
 DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_BSD_SOURCE -DUSE_XSHM \
 	-DHZ=100
 
-X11_INCLUDES = -I/usr/local/include
+X11_INCLUDES = -I/usr/X11R6/include
 
 CFLAGS += $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(DEFINES) $(X11_INCLUDES) -ffast-math -pedantic
 
@@ -27,5 +27,5 @@ GLUT_CFLAGS = -fexceptions
 CFLAGS += -fno-strict-aliasing
 CXXFLAGS += -fno-strict-aliasing
 
-EXTRA_LIB_PATH = -L/usr/local/lib
+EXTRA_LIB_PATH = -L/usr/X11R6/lib
 APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) $(EXTRA_LIB_PATH) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lXext -lXmu -lXi -lX11 -lm

configs/freebsd-dri

@@ -9,10 +9,10 @@ CONFIG_NAME = freebsd-dri
 CC = gcc
 CXX = g++
 WARN_FLAGS = -Wall
-OPT_FLAGS = -O -g
+OPT_FLAGS = -O
 
 EXPAT_INCLUDES = -I/usr/local/include
-X11_INCLUDES = -I/usr/local/include
+X11_INCLUDES = -I/usr/X11R6/include
 DEFINES = -DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 -DIN_DRI_DRIVER \
 	-DGLX_DIRECT_RENDERING -DGLX_INDIRECT_RENDERING \
 	-DHAVE_ALIAS
@@ -32,11 +32,11 @@ ASM_SOURCES =
 LIBDRM_CFLAGS = `pkg-config --cflags libdrm`
 LIBDRM_LIB = `pkg-config --libs libdrm`
 DRI_LIB_DEPS = -L/usr/local/lib -lm -pthread -lexpat $(LIBDRM_LIB)
-GL_LIB_DEPS = -L/usr/local/lib -lX11 -lXext -lXxf86vm -lXdamage -lXfixes \
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lXxf86vm -lXdamage -lXfixes \
 	-lm -pthread $(LIBDRM_LIB)
 
-GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/local/lib -lGLU -lGL -lX11 -lXmu -lXt -lXi -lm
-GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/local/lib -lGL -lXt -lX11
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/X11R6/lib -lGLU -lGL -lX11 -lXmu -lXt -lXi -lm
+GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/X11R6/lib -lGL -lXt -lX11
 
 
 # Directories

configs/freebsd-static

@@ -0,0 +1,27 @@
+# Configuration for generic FreeBSD, making static libs
+# Written by cy on 2008-04-23.
+
+include $(TOP)/configs/freebsd
+
+CONFIG_NAME = freebsd-static
+
+MKLIB_OPTIONS = -static
+PIC_FLAGS =
+
+# Library names (actual file names)
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a
+
+# Library/program dependencies (static libs don't have dependencies)
+GL_LIB_DEPS = 
+OSMESA_LIB_DEPS = 
+GLU_LIB_DEPS = 
+GLUT_LIB_DEPS = 
+GLW_LIB_DEPS = 
+
+# Need to specify all libraries we may need
+APP_LIB_DEPS = $(EXTRA_LIB_PATH) -lX11 -lXext -lXmu -lXt -lXi -lpthread \
+	-lstdc++ -lm

configs/linux-dri

@@ -47,7 +47,8 @@ LIBDRM_CFLAGS = `pkg-config --cflags libdrm`
 LIBDRM_LIB = `pkg-config --libs libdrm`
 DRI_LIB_DEPS  = $(EXTRA_LIB_PATH) -lm -lpthread -lexpat -ldl $(LIBDRM_LIB)
 GL_LIB_DEPS   = $(EXTRA_LIB_PATH) -lX11 -lXext -lXxf86vm -lXdamage -lXfixes \
-		-lm -lpthread -ldl $(LIBDRM_LIB)
+		-lm -lpthread -ldl \
+                $(LIBDRM_LIB)
 
 
 # This is now 0 by default since it seems to confuse the hell out of people
@@ -70,5 +71,5 @@ WINDOW_SYSTEM=dri
 
 # gamma are missing because they have not been converted to use the new
 # interface.
-DRI_DIRS = i810 i915 i965 mach64 mga r128 r200 r300 radeon s3v \
+DRI_DIRS = i810 i915tex i915 i965 mach64 mga r128 r200 r300 radeon s3v \
 	savage sis tdfx trident unichrome ffb

configs/linux-dri-x86-64

@@ -20,5 +20,5 @@ EXTRA_LIB_PATH=-L/usr/X11R6/lib64
 # the new interface.  i810 are missing because there is no x86-64
 # system where they could *ever* be used.
 #
-DRI_DIRS = i915 i965 mach64 mga r128 r200 r300 radeon savage tdfx unichrome
+DRI_DIRS = i915tex i915 i965 mach64 mga r128 r200 radeon tdfx unichrome savage r300
 

configs/linux-dri-xcb

@@ -70,4 +70,4 @@ WINDOW_SYSTEM=dri
 # gamma are missing because they have not been converted to use the new
 # interface.
 DRI_DIRS = i810 i915 mach64 mga r128 r200 r300 radeon s3v \
-	savage sis tdfx trident unichrome ffb 
+	savage sis tdfx trident unichrome ffb nouveau

configs/linux-osmesa

@@ -25,4 +25,4 @@ PROGRAM_DIRS = osdemos
 # Dependencies
 OSMESA_LIB_DEPS = -lm -lpthread
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
-APP_LIB_DEPS = -lm -lpthread
+APP_LIB_DEPS = -lOSMesa -lGLU

configs/linux-osmesa16

@@ -28,4 +28,4 @@ PROGRAM_DIRS =
 # Dependencies
 OSMESA_LIB_DEPS = -lm -lpthread
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
-APP_LIB_DEPS = -lm -lpthread
+APP_LIB_DEPS = -lOSMesa16

configs/linux-osmesa16-static

@@ -29,4 +29,4 @@ PROGRAM_DIRS =
 
 # Dependencies
 OSMESA_LIB_DEPS = -lm -lpthread
-APP_LIB_DEPS = -lm -lpthread
+APP_LIB_DEPS = -lOSMesa16

configs/linux-osmesa32

@@ -28,4 +28,4 @@ PROGRAM_DIRS =
 # Dependencies
 OSMESA_LIB_DEPS = -lm -lpthread
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
-APP_LIB_DEPS = -lm -lpthread
+APP_LIB_DEPS = -lOSMesa32

configs/linux-solo

@@ -24,8 +24,7 @@ PCIACCESS_LIB = `pkg-config --libs pciaccess`
 
 DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
 	-D_BSD_SOURCE -D_GNU_SOURCE -DHAVE_POSIX_MEMALIGN \
-	-DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 -DIN_DRI_DRIVER \
-	-DHAVE_ALIAS
+	-DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 -DDRM_USE_MALLOC -DIN_DRI_DRIVER
 
 CFLAGS   = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \
 	$(ASM_FLAGS) -std=c99 -ffast-math 

debian/compat

@@ -0,0 +1 @@
+5

debian/control

@@ -0,0 +1,359 @@
+Source: mesa
+Section: graphics
+Priority: optional
+Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
+Uploaders: Thierry Reding <thierry@gilfi.de>, Julien Cristau <jcristau@debian.org>, David Nusinow <dnusinow@debian.org>, Brice Goglin <bgoglin@debian.org>
+Standards-Version: 3.7.3
+Build-Depends: debhelper (>= 5), quilt (>= 0.40), pkg-config, libdrm-dev (>= 2.2.0) [!hurd-i386], libx11-dev, xutils-dev, x11proto-gl-dev (>= 1.4.8), libxxf86vm-dev, libexpat1-dev, lesstif2-dev, dpkg-dev (>= 1.13.19), libxfixes-dev, libxdamage-dev, libxext-dev
+Vcs-Git: git://git.debian.org/git/pkg-xorg/lib/mesa
+Vcs-Browser: http://git.debian.org/?p=pkg-xorg/lib/mesa.git
+Homepage: http://mesa3d.sourceforge.net/
+
+Package: libgl1-mesa-swx11
+Section: libs
+Priority: extra
+Architecture: any
+Depends: ${shlibs:Depends}, libosmesa6 (>= 6.5.2-1)
+Conflicts: mesag3-glide, mesag3-glide2, mesag3+ggi, libgl1, nvidia-glx, mesag3, libgl1-mesa-swrast
+Provides: libgl1, mesag3, libgl1-mesa-swrast
+Replaces: libgl1, mesag3, libgl1-mesa-swrast
+Description: A free implementation of the OpenGL API -- runtime
+ Mesa is a 3-D graphics library with an API which is very similar to
+ that of OpenGL.  To the extent that Mesa utilizes the OpenGL command
+ syntax or state machine, it is being used with authorization from
+ Silicon Graphics, Inc.  However, the author makes no claim that Mesa
+ is in any way a compatible replacement for OpenGL or associated with
+ Silicon Graphics, Inc.
+ .
+ This library provides a pure software rasteriser; it does not provide
+ a direct rendering-capable library, or one which uses GLX.  For that,
+ please see libgl1-mesa-glx.
+ .
+ On Linux, this library is also known as libGL or libGL.so.1.
+
+Package: libgl1-mesa-swx11-dbg
+Section: libdevel
+Priority: extra
+Architecture: any
+Depends: libgl1-mesa-swx11 (= ${binary:Version})
+Conflicts: libgl1-mesa-swrast-dbg
+Provides: libgl1-mesa-swrast-dbg
+Replaces: libgl1-mesa-swrast-dbg
+Description: A free implementation of the OpenGL API -- debugging symbols
+ Mesa is a 3-D graphics library with an API which is very similar to
+ that of OpenGL.  To the extent that Mesa utilizes the OpenGL command
+ syntax or state machine, it is being used with authorization from
+ Silicon Graphics, Inc.  However, the author makes no claim that Mesa
+ is in any way a compatible replacement for OpenGL or associated with
+ Silicon Graphics, Inc.
+ .
+ This library provides a pure software rasteriser; it does not provide
+ a direct rendering-capable library, or one which uses GLX.  For that,
+ please see libgl1-mesa-glx.
+ .
+ On Linux, this library is also known as libGL or libGL.so.1.
+ .
+ This package contains debugging symbols for the software rasterization GL
+ library.
+
+Package: libgl1-mesa-swx11-i686
+Section: libs
+Priority: extra
+Architecture: i386
+Depends: libgl1-mesa-swx11 (= ${binary:Version}), ${shlibs:Depends}
+Description: Mesa OpenGL runtime [i686 optimized]
+ Mesa is a 3-D graphics library with an API which is very similar to
+ that of OpenGL.  To the extent that Mesa utilizes the OpenGL command
+ syntax or state machine, it is being used with authorization from
+ Silicon Graphics, Inc.  However, the author makes no claim that Mesa
+ is in any way a compatible replacement for OpenGL or associated with
+ Silicon Graphics, Inc.
+ .
+ This library provides a pure software rasteriser; it does not provide
+ a direct rendering-capable library, or one which uses GLX.  For that,
+ please see libgl1-mesa-glx.
+ .
+ On Linux, this library is also known as libGL or libGL.so.1.
+ .
+ This set of libraries is optimized for i686 machines and will only be used if
+ you are running a 2.6 kernel on an i686 class CPU. This includes Pentium Pro,
+ Pentium II/II/IV, Celeron CPU's and similar class CPU's (including clones
+ such as AMD Athlon/Opteron, VIA C3 Nehemiah, but not VIA C3 Ezla).
+
+Package: libgl1-mesa-swx11-dev
+Section: libdevel
+Priority: extra
+Architecture: any
+Depends: libgl1-mesa-swx11 (= ${binary:Version}), libc6-dev, libx11-dev, libxext6, mesa-common-dev (= ${source:Version})
+Provides: libgl-dev, mesag-dev, libgl1-mesa-swrast-dev
+Conflicts: mesa-dev, libgl-dev, mesag3 (<< 3.1-1), nvidia-glx-dev, mesag-dev, libgl1-mesa-swrast-dev
+Replaces: libgl-dev, mesag-dev, libgl1-mesa-swrast-dev
+Description: A free implementation of the OpenGL API -- development files
+ This package provides the development environment required for
+ compiling programs with Mesa.  For a complete description of Mesa,
+ please look at the libgl1-mesa-swx11 package.
+ .
+ This library provides a pure software rasteriser; it does not provide
+ a direct rendering-capable library, or one which uses GLX.  For that,
+ please see libgl1-mesa-dev.
+
+Package: libgl1-mesa-glx
+Section: libs
+Architecture: any
+Depends: ${shlibs:Depends}
+Conflicts: libgl1, libgl1-mesa-dri (<< 6.4.0)
+Replaces: libgl1, libgl1-mesa-dri (<< 6.4.0)
+Provides: libgl1
+Description: A free implementation of the OpenGL API -- GLX runtime
+ This version of Mesa provides GLX and DRI capabilities: it is capable of
+ both direct and indirect rendering.  For direct rendering, it can use DRI
+ modules from the libgl1-mesa-dri package to accelerate drawing.
+ .
+ This package does not include the modules themselves: these can be found
+ in the libgl1-mesa-dri package.
+ .
+ For a complete description of Mesa, please look at the
+ libgl1-mesa-swx11 package.
+
+Package: libgl1-mesa-glx-dbg
+Section: libdevel
+Priority: extra
+Architecture: any
+Depends: libgl1-mesa-glx (= ${binary:Version})
+Description: Debugging symbols for the Mesa GLX runtime
+ This version of Mesa provides GLX and DRI capabilities: it is capable of
+ both direct and indirect rendering.  For direct rendering, it can use DRI
+ modules from the libgl1-mesa-dri package to accelerate drawing.
+ .
+ This package does not include the modules themselves: these can be found
+ in the libgl1-mesa-dri package.
+ .
+ For a complete description of Mesa, please look at the
+ libgl1-mesa-swx11 package.
+ .
+ This package contains debugging symbols for the GL library with GLX and DRI
+ capabilities.
+
+#Package: libgl1-mesa-glx-i686
+#Section: libs
+#Priority: extra
+#Architecture: i386
+#Pre-Depends: libgl1-mesa-glx
+#Description: A free implementation of the OpenGL API -- GLX runtime [i686 optimized]
+# This version of Mesa provides GLX and DRI capabilities: it is capable of
+# both direct and indirect rendering.  For direct rendering, it can use DRI
+# modules from the libgl1-mesa-dri package to accelerate drawing.
+# .
+# This package does not include the modules themselves: these can be found
+# in the libgl1-mesa-dri package.
+# .
+# For a complete description of Mesa, please look at the
+# libgl1-mesa-swx11 package.
+# .
+# This set of libraries is optimized for i686 machines and will only be used if
+# you are running a 2.6 kernel on an i686 class CPU. This includes Pentium Pro,
+# Pentium II/II/IV, Celeron CPU's and similar class CPU's (including clones
+# such as AMD Athlon/Opteron, VIA C3 Nehemiah, but not VIA C3 Ezla).
+
+Package: libgl1-mesa-dri
+Section: libs
+Priority: optional
+Architecture: alpha amd64 arm armeb armel hppa i386 ia64 kfreebsd-i386 kfreebsd-amd64 m68k mips mipsel powerpc s390 sparc
+Depends: ${shlibs:Depends}, libgl1-mesa-glx (= ${binary:Version})
+Suggests: libglide3
+Conflicts: xlibmesa-dri (<< 1:7.0.0)
+Replaces: xlibmesa-dri (<< 1:7.0.0)
+Description: A free implementation of the OpenGL API -- DRI modules
+ This version of Mesa provides GLX and DRI capabilities: it is capable of
+ both direct and indirect rendering.  For direct rendering, it can use DRI
+ modules from the libgl1-mesa-dri package to accelerate drawing.
+ .
+ This package does not include the OpenGL library itself, only the DRI
+ modules for accelerating direct rendering.
+ .
+ For a complete description of Mesa, please look at the
+ libgl1-mesa-swx11 package.
+ .
+ The tdfx DRI module needs libglide3 to enable direct rendering.
+
+Package: libgl1-mesa-dri-dbg
+Section: libdevel
+Priority: extra
+Architecture: alpha amd64 arm armeb armel hppa i386 ia64 kfreebsd-i386 kfreebsd-amd64 m68k mips mipsel powerpc s390 sparc
+Depends: libgl1-mesa-dri (= ${binary:Version})
+Description: Debugging symbols for the Mesa DRI modules
+ This version of Mesa provides GLX and DRI capabilities: it is capable of
+ both direct and indirect rendering.  For direct rendering, it can use DRI
+ modules from the libgl1-mesa-dri package to accelerate drawing.
+ .
+ This package does not include the OpenGL library itself, only the DRI
+ modules for accelerating direct rendering.
+ .
+ For a complete description of Mesa, please look at the
+ libgl1-mesa-swx11 package.
+ .
+ This package contains debugging symbols for the DRI modules.
+
+#Package: libgl1-mesa-dri-i686
+#Section: libs
+#Priority: extra
+#Architecture: i386
+#Pre-Depends: libgl1-mesa-dri
+#Description: A free implementation of the OpenGL API -- DRI modules [i686 optimized]
+# This version of Mesa provides GLX and DRI capabilities: it is capable of
+# both direct and indirect rendering.  For direct rendering, it can use DRI
+# modules from the libgl1-mesa-dri package to accelerate drawing.
+# .
+# This package does not include the OpenGL library itself, only the DRI
+# modules for accelerating direct rendering.
+# .
+# For a complete description of Mesa, please look at the
+# libgl1-mesa-swx11 package.
+# .
+# This set of libraries is optimized for i686 machines and will only be used if
+# you are running a 2.6 kernel on an i686 class CPU. This includes Pentium Pro,
+# Pentium II/II/IV, Celeron CPU's and similar class CPU's (including clones
+# such as AMD Athlon/Opteron, VIA C3 Nehemiah, but not VIA C3 Ezla).
+
+Package: libgl1-mesa-dev
+Section: libdevel
+Architecture: all
+Depends: libc6-dev, mesa-common-dev (= ${source:Version}), libgl1-mesa-glx (>= ${source:Upstream-Version})
+Conflicts: libgl-dev, libgl1-mesa-dri-dev
+Replaces: libgl-dev, libgl1-mesa-dri-dev
+Provides: libgl-dev, libgl1-mesa-dri-dev
+Description: A free implementation of the OpenGL API -- GLX development files
+ This version of Mesa provides GLX and DRI capabilities: it is capable of
+ both direct and indirect rendering.  For direct rendering, it can use DRI
+ modules from the libgl1-mesa-dri package to accelerate drawing.
+ .
+ This package includes headers and static libraries for compiling
+ programs with Mesa.
+ .
+ For a complete description of Mesa, please look at the libgl1-mesa-swx11
+ package.
+
+Package: mesa-common-dev
+Section: libdevel
+Architecture: all
+Replaces: xlibmesa-gl-dev (<< 1:7), xlibosmesa-dev, libgl1-mesa-swx11-dev (<< 6.5.2), libgl1-mesa-dev (<< 6.5.2)
+Depends: libx11-dev
+Description: Developer documentation for Mesa
+ This package includes the specifications for the Mesa-specific OpenGL
+ extensions, the complete set of release notes and the development header
+ files common to all Mesa packages.
+
+Package: libosmesa6
+Section: libs
+Architecture: any
+Depends: ${shlibs:Depends}
+Replaces: libgl1-mesa-swx11 (<< 6.5.2)
+Description: Mesa Off-screen rendering extension
+ OSmesa is a Mesa extension that allows programs to render to an
+ off-screen buffer using the OpenGL API without having to create a
+ rendering context on an X Server.  It uses a pure software renderer.
+ .
+ This package provides both 16-bit and 32-bit versions of the off-screen
+ renderer which do not require external libraries to work.
+
+Package: libosmesa6-dev
+Section: libdevel
+Architecture: any
+Depends: libosmesa6 (= ${binary:Version}), mesa-common-dev (= ${source:Version}) | libgl-dev
+Conflicts: xlibosmesa-dev, libosmesa4-dev, libosmesa-dev
+Replaces: xlibosmesa-dev, libosmesa-dev, libgl1-mesa-swx11-dev (<< 6.5.2), mesa-common-dev (<< 6.5.2)
+Provides: xlibosmesa-dev, libosmesa-dev
+Description: Mesa Off-screen rendering extension -- development files
+ This package provides the required environment for developing programs
+ that use the off-screen rendering extension of Mesa.
+ .
+ For more information on OSmesa see the libosmesa6 package.
+
+Package: libglu1-mesa
+Section: libs
+Architecture: any
+Depends: ${shlibs:Depends}, libgl1-mesa-glx | libgl1
+Provides: libglu1
+Conflicts: mesag3 (<< 5.0.0-1), xlibmesa3, libglu1
+Replaces: libglu1
+Description: The OpenGL utility library (GLU)
+ GLU offers simple interfaces for building mipmaps; checking for the
+ presence of extensions in the OpenGL (or other libraries which follow
+ the same conventions for advertising extensions); drawing
+ piecewise-linear curves, NURBS, quadrics and other primitives
+ (including, but not limited to, teapots); tesselating surfaces; setting
+ up projection matrices and unprojecting screen coordinates to world
+ coordinates.
+ .
+ On Linux, this library is also known as libGLU or libGLU.so.1.
+ .
+ This package provides the SGI implementation of GLU shipped with the
+ Mesa package (ergo the "-mesa" suffix).
+
+Package: libglu1-mesa-dev
+Section: libdevel
+Architecture: any
+Depends: libglu1-mesa (= ${binary:Version}), libgl1-mesa-dev | libgl-dev
+Provides: libglu-dev, xlibmesa-glu-dev
+Conflicts: mesag-dev (<< 5.0.0-1), mesa-glide2-dev (<< 5.0.0-1), mesag3+ggi-dev (<< 5.0.0-1), xlibmesa-dev
+Replaces: libglu-dev
+Description: The OpenGL utility library -- development files
+ Includes headers and static libraries for compiling programs with GLU.
+ .
+ For a complete description of GLU, please look at the libglu1-mesa
+ package.
+
+Package: libglw1-mesa
+Section: libs
+Architecture: any
+Depends: ${shlibs:Depends}
+Provides: libglw1
+Description: A free implementation of the OpenGL API -- runtime
+ Mesa is a 3-D graphics library with an API which is very similar to
+ that of OpenGL.  To the extent that Mesa utilizes the OpenGL command
+ syntax or state machine, it is being used with authorization from
+ Silicon Graphics, Inc.  However, the author makes no claim that Mesa
+ is in any way a compatible replacement for OpenGL or associated with
+ Silicon Graphics, Inc.
+ .
+ This package provides a simple widgets library, libGLw, which
+ allows Motif-based applications to embed an OpenGL drawing context.
+ .
+ On Linux, this library is also known as libGLw or libGLw.so.1.
+
+Package: libglw1-mesa-dev
+Section: libdevel
+Architecture: any
+Depends: libglw1-mesa (= ${binary:Version}), libc6-dev, libx11-dev, libxext6, mesa-common-dev (= ${source:Version})
+Provides: mesag3-widgets, mesag-widgets-dev, libglw-dev
+Conflicts: libglw-dev, libgl1-mesa-swx11-dev (<< 6.5.2-4)
+Replaces: libglw-dev
+Description: A free implementation of the OpenGL API -- development files
+ This package provides the development environment required for
+ compiling programs with the Mesa widgets library, libGLw, which
+ allows Motif-based applications to embed an OpenGL drawing context.
+ The headers and static libraries for compiling programs that use this
+ library are included.
+
+Package: mesa-swx11-source
+Section: libdevel
+Architecture: all
+Description: Mesa software rasteriser source -- development files
+ This package contains the source to the Mesa software rasteriser, which
+ implements all of Mesa's GL support in software.  It powers the X11 and
+ X server backends (assuming unaccelerated indirect).  This package is
+ provided mainly for modular X servers which support GL, and need the
+ software rasteriser source to build the GLcore module for unaccelerated
+ indirect rendering.
+
+Package: mesa-utils
+Section: x11
+Priority: optional
+Architecture: any
+Depends: ${shlibs:Depends}
+Replaces: xbase-clients (<< 6.8.2-38)
+Description: Miscellaneous Mesa GL utilities
+ This package provides several basic GL utilities built by Mesa, including
+ glxinfo and glxgears.
+
+# vim: tw=0

debian/copyright

@@ -0,0 +1,444 @@
+This package was debianized by James A. Treacy treacy@debian.org on Thu,
+6 Jan 2000 01:11:34 -0500.  It was newly debianized by Marcelo E.
+Magallon <mmagallo@debian.org> on Sat, 25 Dec 2004 14:50:02 -0600. It was
+again debianized by Thierry Reding <thierry@gilfi.de> on Sat, 14 Oct 2006
+02:01:12 +0200.
+
+It was downloaded from http://www.mesa3d.org/download.html
+
+For more information see:
+
+  http://www.mesa3d.org/
+
+Copyright:
+
+Upstream Author: Brian Paul <brian.paul@tungstengraphics.com>
+
+License:
+
+                    License / Copyright Information
+
+   The Mesa distribution consists of several components. Different
+   copyrights and licenses apply to different components. For
+   example, GLUT is copyrighted by Mark Kilgard, some demo programs
+   are copyrighted by SGI, some of the Mesa device drivers are
+   copyrighted by their authors. See below for a list of Mesa's
+   components and the copyright/license for each.
+
+   The core Mesa library is licensed according to the terms of the
+   XFree86 copyright (an MIT-style license). This allows integration
+   with the XFree86/DRI project. Unless otherwise stated, the Mesa
+   source code and documentation is licensed as follows:
+
+ Copyright (C) 1999-2003  Brian Paul   All Rights Reserved.
+
+ Permission is hereby granted, free of charge, to any person obtaining a
+ copy of this software and associated documentation files (the "Software"),
+ to deal in the Software without restriction, including without limitation
+ the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ and/or sell copies of the Software, and to permit persons to whom the
+ Software is furnished to do so, subject to the following conditions:
+
+ The above copyright notice and this permission notice shall be included
+ in all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ BRIAN PAUL BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+ AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+                        Attention, Contributors
+
+   When contributing to the Mesa project you must agree to relinquish
+   your work to the holder of the copyright for the particular
+   component you're contributing to. That is, you can't put your own
+   copyright on the code, unless it's a modular piece that can be
+   omitted from Mesa (like a new device driver). If for example, you
+   contribute a bug fix to Mesa's texture mapping code, your code
+   will become a part of the body of work which is copyrighted by
+   Brian Paul and licensed by the above terms.
+
+----------------------------------------------------------------------
+
+Some files, as listed below, are made available under the SGI Free B 
+license.  This license is as follows:
+
+           SGI FREE SOFTWARE LICENSE B (Version 1.1 [02/22/2000])
+
+1.  Definitions.
+
+1.1. "Additional Notice Provisions" means such additional provisions as
+     appear in the Notice in Original Code under the heading "Additional
+     Notice Provisions."
+
+1.2. "Covered Code" means the Original Code or Modifications, or any
+     combination thereof.
+
+1.3. "Hardware" means any physical device that accepts input, processes
+     input, stores the results of processing, and/or provides output.
+
+1.4. "Larger Work" means a work that combines Covered Code or portions
+     thereof with code not governed by the terms of this License.
+
+1.5. "Licensable" means having the right to grant, to the maximum extent
+     possible, whether at the time of the initial grant or subsequently
+     acquired, any and all of the rights conveyed herein.
+
+1.6. "License" means this document.
+
+1.7. "Licensed Patents" means patent claims Licensable by SGI that are
+     infringed by the use or sale of Original Code or any Modifications
+     provided by SGI, or any combination thereof.
+
+1.8. "Modifications" means any addition to or deletion from the
+     substance or structure of the Original Code or any previous
+     Modifications. When Covered Code is released as a series of files,
+     a Modification is: 
+
+     A. Any addition to the contents of a file containing Original Code
+        and/or addition to or deletion from the contents of a file
+        containing previous Modifications.
+
+     B. Any new file that contains any part of the Original Code or
+        previous Modifications.
+
+1.9. "Notice" means any notice in Original Code or Covered Code, as
+     required by and in compliance with this License.
+
+1.10. "Original Code" means source code of computer software code that
+      is described in the source code Notice required by Exhibit A as
+      Original Code, and updates and error corrections specifically 
+      thereto.
+
+1.11. "Recipient" means an individual or a legal entity exercising
+      rights under, and complying with all of the terms of, this License
+      or a future version of this License issued under Section 8. For
+      legal entities, "Recipient" includes any entity that controls, is
+      controlled by, or is under common control with Recipient. For
+      purposes of this definition, "control" of an entity means (a) the
+      power, direct or indirect, to direct or manage such entity, or (b)
+      ownership of fifty percent (50%) or more of the outstanding shares
+      or beneficial ownership of such entity.
+
+1.12. "Recipient Patents" means patent claims Licensable by a Recipient
+      that are infringed by the use or sale of Original Code or any
+      Modifications provided by SGI, or any combination thereof.
+
+1.13. "SGI" means Silicon Graphics, Inc.
+
+1.14. "SGI Patents" means patent claims Licensable by SGI other than the
+      Licensed Patents.
+
+2.  License Grant and Restrictions.
+
+2.1. SGI License Grant. Subject to the terms of this License and any
+     third party intellectual property claims, for the duration of
+     intellectual property protections inherent in the Original Code,
+     SGI hereby grants Recipient a worldwide, royalty-free,
+     non-exclusive license, to do the following: (i) under copyrights
+     Licensable by SGI, to reproduce, distribute, create derivative
+     works from, and, to the extent applicable, display and perform the
+     Original Code and/or any Modifications provided by SGI alone and/or
+     as part of a Larger Work; and (ii) under any Licensable Patents, to
+     make, have made, use, sell, offer for sale, import and/or otherwise
+     transfer the Original Code and/or any Modifications provided by
+     SGI. Recipient accepts the terms and conditions of this License by
+     undertaking any of the aforementioned actions. The patent license
+     shall apply to the Covered Code if, at the time any related
+     Modification is added, such addition of the Modification causes
+     such combination to be covered by the Licensed Patents. The patent
+     license in Section 2.1(ii) shall not apply to any other
+     combinations that include the Modification. No patent license is
+     provided under SGI Patents for infringements of SGI Patents by
+     Modifications not provided by SGI or combinations of Original Code
+     and Modifications not provided by SGI.
+
+2.2. Recipient License Grant. Subject to the terms of this License and
+     any third party intellectual property claims, Recipient hereby
+     grants SGI and any other Recipients a worldwide, royalty-free,
+     non-exclusive license, under any Recipient Patents, to make, have
+     made, use, sell, offer for sale, import and/or otherwise transfer
+     the Original Code and/or any Modifications provided by SGI.
+
+2.3. No License For Hardware Implementations. The licenses granted in
+     Section 2.1 and 2.2 are not applicable to implementation in
+     Hardware of the algorithms embodied in the Original Code or any
+     Modifications provided by SGI .
+
+3.  Redistributions. 
+
+3.1. Retention of Notice/Copy of License. The Notice set forth in
+     Exhibit A, below, must be conspicuously retained or included in any
+     and all redistributions of Covered Code. For distributions of the
+     Covered Code in source code form, the Notice must appear in every
+     file that can include a text comments field; in executable form,
+     the Notice and a copy of this License must appear in related
+     documentation or collateral where the Recipient’s rights relating
+     to Covered Code are described. Any Additional Notice Provisions
+     which actually appears in the Original Code must also be retained
+     or included in any and all redistributions of Covered Code.
+
+3.2. Alternative License. Provided that Recipient is in compliance with
+     the terms of this License, Recipient may, so long as without
+     derogation of any of SGI’s rights in and to the Original Code,
+     distribute the source code and/or executable version(s) of Covered
+     Code under (1) this License; (2) a license identical to this
+     License but for only such changes as are necessary in order to
+     clarify Recipient’s role as licensor of Modifications; and/or (3) a
+     license of Recipient’s choosing, containing terms different from
+     this License, provided that the license terms include this Section
+     3 and Sections 4, 6, 7, 10, 12, and 13, which terms may not be
+     modified or superseded by any other terms of such license. If
+     Recipient elects to use any license other than this License,
+     Recipient must make it absolutely clear that any of its terms which
+     differ from this License are offered by Recipient alone, and not by
+     SGI. It is emphasized that this License is a limited license, and,
+     regardless of the license form employed by Recipient in accordance
+     with this Section 3.2, Recipient may relicense only such rights, in
+     Original Code and Modifications by SGI, as it has actually been
+     granted by SGI in this License.
+
+3.3. Indemnity. Recipient hereby agrees to indemnify SGI for any
+     liability incurred by SGI as a result of any such alternative
+     license terms Recipient offers.
+
+4.  Termination. This License and the rights granted hereunder will
+    terminate automatically if Recipient breaches any term herein and
+    fails to cure such breach within 30 days thereof. Any sublicense to 
+    the Covered Code that is properly granted shall survive any
+    termination of this License, absent termination by the terms of such
+    sublicense. Provisions that, by their nature, must remain in effect
+    beyond the termination of this License, shall survive.
+
+5.  No Trademark Or Other Rights. This License does not grant any rights
+    to: (i) any software apart from the Covered Code, nor shall any
+    other rights or licenses not expressly granted hereunder arise by
+    implication, estoppel or otherwise with respect to the Covered Code;
+    (ii) any trade name, trademark or service mark whatsoever, including
+    without limitation any related right for purposes of endorsement or
+    promotion of products derived from the Covered Code, without prior
+    written permission of SGI; or (iii) any title to or ownership of the
+    Original Code, which shall at all times remains with SGI. All rights
+    in the Original Code not expressly granted under this License are
+    reserved.
+
+6.  Compliance with Laws; Non-Infringement. There are various worldwide
+    laws, regulations, and executive orders applicable to dispositions
+    of Covered Code, including without limitation export, re-export, and
+    import control laws, regulations, and executive orders, of the U.S.
+    government and other countries, and Recipient is reminded it is
+    obliged to obey such laws, regulations, and executive orders.
+    Recipient may not distribute Covered Code that (i) in any way
+    infringes (directly or contributorily) any intellectual property
+    rights of any kind of any other person or entity or (ii) breaches
+    any representation or warranty, express, implied or statutory, to
+    which, under any applicable law, it might be deemed to have been
+    subject.
+
+7.  Claims of Infringement. If Recipient learns of any third party claim
+    that any disposition of Covered Code and/or functionality wholly or
+    partially infringes the third party's intellectual property rights,
+    Recipient will promptly notify SGI of such claim.
+
+8.  Versions of the License. SGI may publish revised and/or new versions
+    of the License from time to time, each with a distinguishing version
+    number. Once Covered Code has been published under a particular
+    version of the License, Recipient may, for the duration of the
+    license, continue to use it under the terms of that version, or
+    choose to use such Covered Code under the terms of any subsequent
+    version published by SGI. Subject to the provisions of Sections 3
+    and 4 of this License, only SGI may modify the terms applicable to
+    Covered Code created under this License.
+
+9.  DISCLAIMER OF WARRANTY. COVERED CODE IS PROVIDED "AS IS." ALL
+    EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS ARE DISCLAIMED,
+    INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES AND CONDITIONS
+    OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR
+    PURPOSE, AND NON-INFRINGEMENT. SGI ASSUMES NO RISK AS TO THE QUALITY
+    AND PERFORMANCE OF THE SOFTWARE. SHOULD THE SOFTWARE PROVE DEFECTIVE
+    IN ANY RESPECT, SGI ASSUMES NO COST OR LIABILITY FOR SERVICING,
+    REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY IS AN ESSENTIAL
+    PART OF THIS LICENSE. NO USE OF ANY COVERED CODE IS AUTHORIZED
+    HEREUNDER EXCEPT SUBJECT TO THIS DISCLAIMER.
+
+10.  LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES NOR LEGAL THEORY,
+     WHETHER TORT (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE OR STRICT
+     LIABILITY), CONTRACT, OR OTHERWISE, SHALL SGI OR ANY SGI LICENSOR
+     BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR
+     CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT
+     LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, LOSS OF
+     DATA, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER
+     COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN
+     INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF
+     LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY
+     RESULTING FROM SGI's NEGLIGENCE TO THE EXTENT APPLICABLE LAW
+     PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE
+     EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
+     THAT EXCLUSION AND LIMITATION MAY NOT APPLY TO RECIPIENT.
+
+11.  Indemnity. Recipient shall be solely responsible for damages
+     arising, directly or indirectly, out of its utilization of rights
+     under this License. Recipient will defend, indemnify and hold
+     harmless Silicon Graphics, Inc. from and against any loss,
+     liability, damages, costs or expenses (including the payment of
+     reasonable attorneys fees) arising out of Recipient's use,
+     modification, reproduction and distribution of the Covered Code or
+     out of any representation or warranty made by Recipient.
+
+12.  U.S. Government End Users. The Covered Code is a "commercial item"
+     consisting of "commercial computer software" as such terms are
+     defined in title 48 of the Code of Federal Regulations and all U.S.
+     Government End Users acquire only the rights set forth in this
+     License and are subject to the terms of this License.
+
+13.  Miscellaneous. This License represents the complete agreement
+     concerning the its subject matter. If any provision of this License
+     is held to be unenforceable, such provision shall be reformed so as
+     to achieve as nearly as possible the same legal and economic effect
+     as the original provision and the remainder of this License will
+     remain in effect. This License shall be governed by and construed
+     in accordance with the laws of the United States and the State of
+     California as applied to agreements entered into and to be
+     performed entirely within California between California residents.
+     Any litigation relating to this License shall be subject to the
+     exclusive jurisdiction of the Federal Courts of the Northern
+     District of California (or, absent subject matter jurisdiction in
+     such courts, the courts of the State of California), with venue
+     lying exclusively in Santa Clara County, California, with the
+     losing party responsible for costs, including without limitation,
+     court costs and reasonable attorneys fees and expenses. The
+     application of the United Nations Convention on Contracts for the
+     International Sale of Goods is expressly excluded. Any law or
+     regulation that provides that the language of a contract shall be
+     construed against the drafter shall not apply to this License.
+
+Exhibit A
+
+License Applicability. Except to the extent portions of this file are
+made subject to an alternative license as permitted in the SGI Free
+Software License B, Version 1.1 (the "License"), the contents of this
+file are subject only to the provisions of the License. You may not use
+this file except in compliance with the License. You may obtain a copy
+of the License at Silicon Graphics, Inc., attn: Legal Services, 1600
+Amphitheatre Parkway, Mountain View, CA 94043-1351, or at:
+
+http://oss.sgi.com/projects/FreeB
+
+Note that, as provided in the License, the Software is distributed on an
+"AS IS" basis, with ALL EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS
+DISCLAIMED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES AND
+CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A
+PARTICULAR PURPOSE, AND NON-INFRINGEMENT.
+
+Original Code. The Original Code is: [name of software, version number,
+and release date], developed by Silicon Graphics, Inc. The Original Code
+is Copyright (c) [dates of first publication, as appearing in the Notice
+in the Original Code] Silicon Graphics, Inc. Copyright in any portions
+created by third parties is as indicated elsewhere herein. All Rights
+Reserved.
+
+Additional Notice Provisions: [such additional provisions, if any, as 
+appear in the Notice in the Original Code under the heading "Additional 
+Notice Provisions"]
+
+--------------------------------------------------------------------------
+
+Some other files listed below are made available from Silicon Graphics,
+Inc. under a more liberal, MIT-style license, as follows:
+
+   Permission to use, copy, modify, and distribute this software for
+   any purpose and without fee is hereby granted, provided that the above
+   copyright notice appear in all copies and that both the copyright notice
+   and this permission notice appear in supporting documentation, and that
+   the name of Silicon Graphics, Inc. not be used in advertising
+   or publicity pertaining to distribution of the software without specific,
+   written prior permission.
+
+   THE MATERIAL EMBODIED ON THIS SOFTWARE IS PROVIDED TO YOU "AS-IS"
+   AND WITHOUT WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR OTHERWISE
+   INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR
+   FITNESS FOR A PARTICULAR PURPOSE.  IN NO EVENT SHALL SILICON
+   GRAPHICS, INC.  BE LIABLE TO YOU OR ANYONE ELSE FOR ANY DIRECT,
+   SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY
+   KIND, OR ANY DAMAGES WHATSOEVER, INCLUDING WITHOUT LIMITATION,
+   LOSS OF PROFIT, LOSS OF USE, SAVINGS OR REVENUE, OR THE CLAIMS OF
+   THIRD PARTIES, WHETHER OR NOT SILICON GRAPHICS, INC.  HAS BEEN
+   ADVISED OF THE POSSIBILITY OF SUCH LOSS, HOWEVER CAUSED AND ON
+   ANY THEORY OF LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE
+   POSSESSION, USE OR PERFORMANCE OF THIS SOFTWARE.
+   
+   US Government Users Restricted Rights
+   Use, duplication, or disclosure by the Government is subject to
+   restrictions set forth in FAR 52.227.19(c)(2) or subparagraph
+   (c)(1)(ii) of the Rights in Technical Data and Computer Software
+   clause at DFARS 252.227-7013 and/or in similar or successor
+   clauses in the FAR or the DOD or NASA FAR Supplement.
+   Unpublished-- rights reserved under the copyright laws of the
+   United States.  Contractor/manufacturer is Silicon Graphics,
+   Inc., 2011 N.  Shoreline Blvd., Mountain View, CA 94039-7311.
+
+--------------------------------------------------------------------------
+
+ Mesa Component Licenses:
+
+ Component       Files                 Primary Author      License
+ ----------------------------------------------------------------------------
+ core Mesa code  src/*.[ch]            Brian Paul          Mesa
+                 include/GL/gl.h
+
+ GLX driver      src/X/*               Brian Paul          Mesa
+                 include/GL/glx.h
+                 include/GL/xmesa.h
+
+ OS/Mesa driver  src/OSmesa/*          Brian Paul          Mesa
+                 include/GL/osmesa.h
+
+ 3Dfx driver     src/FX/*              David Bucciarelli   Mesa
+                 include/GL/fxmesa.h
+
+ BeOS R4 driver  mesa/drivers/beos/    Brian Paul          Mesa
+
+ MGL driver      include/GL/mglmesa.h  SciTech, Inc        GNU LGPL
+
+ Windows driver  mesa/drivers/windows/ Li Wei              GNU LGPL
+                 include/GL/wmesa.h
+
+ SVGA driver     mesa/drivers/svga/    Brian Paul          GNU LGPL
+                 include/GL/svgamesa.h
+
+ DOS driver      mesa/drivers/dos/     Charlie Wallace     GNU LGPL
+                 include/GL/dosmesa.h
+
+ GGI driver      mesa/drivers/ggi/     Uwe Maurer          GNU LGPL
+                 include/GL/ggimesa.h
+
+ GLUT            src/glut/*            Mark Kilgard        Mark's copyright
+                 include/GL/*glut*.h
+
+ GLU library     src/glu/*             Brian Paul          GNU LGPL
+
+ SGI GLU library src/glu/sgi/*         SGI                 SGI Free B
+                 include/GL/glu.h
+
+ Ext registry    include/GL/glext.h    SGI                 SGI Free B
+                 include/GL/glxext.h
+
+ demo programs   progs/demos/*         various             see source files
+
+ X demos         progs/xdemos/*        Brian Paul          see source files
+
+ SGI demos       progs/samples/*       SGI                 SGI MIT-style
+
+ RedBook demos   progs/redbook/*       SGI                 SGI MIT-style
+
+
+On Debian systems the full text of the GNU LGPL license is found in
+/usr/share/common-licenses/LGPL.
+
+------------------------------------------------------------------------------
+
+The Debian packaging is (C) 2006, Thierry Reding <thierry@gilfi.de> and
+is licensed under the GPL, see `/usr/share/common-licenses/GPL'.
+

debian/glxdemo.1

@@ -0,0 +1,15 @@
+.TH glxdemo 1 "2006-11-29"
+.SH NAME
+glxdemo \- a demonstration of the GLX functions
+.SH SYNOPSIS
+.B glxdemo
+.SH DESCRIPTION
+The \fIglxdemo\fP program shows how to use the GLX functions in order to
+create an OpenGL program running on top of an X server. This program is most
+useful when studied in its source code form.
+.SH AUTHOR
+glxdemo was written by Brian Paul <brian.paul@tungstengraphics.com>.
+.PP
+This manual page was written by Thierry Reding <thierry@gilfi.de>, for the
+Debian project (but may be used by others).
+

debian/glxgears.1

@@ -0,0 +1,29 @@
+.TH glxgears 1 "2006-11-29"
+.SH NAME
+glxgears \- ``gears'' demo for GLX
+.SH SYNOPSIS
+.B glxgears
+.RI [ options ]
+.SH DESCRIPTION
+The \fIglxgears\fP program is a port of the ``gears'' demo to GLX. It displays
+a set of rotating gears and prints out the frame rate at regular intervals. It
+has become quite popular as basic benchmarking tool.
+.SH OPTIONS
+.TP 8
+.B \-display \fIdisplay\fP
+Specify which X display to run on.
+.TP 8
+.B \-info
+Display OpenGL renderer information.
+.TP 8
+.B \-stereo
+Use a stereo enabled GLX visual.
+.TP 8
+.B \-fullscreen
+Run in fullscreen mode.
+.SH AUTHOR
+glxgears was written by Brian Paul <brian.paul@tungstengraphics.com>.
+.PP
+This manual page was written by Thierry Reding <thierry@gilfi.de>, for the
+Debian project (but may be used by others).
+

debian/glxheads.1

@@ -0,0 +1,30 @@
+.TH glxheads 1 "2006-11-29"
+.SH NAME
+glxheads \- exercise multiple GLX connections
+.SH SYNOPSIS
+.B glxheads
+[\fIdisplay\fP ...]
+.SH DESCRIPTION
+The \fIglxheads\fP program will try to open GLX connections on multiple X
+displays as specified on the command-line. If a connection can be made it will
+try to create a direct GLX context (and fallback to using indirect contexts if
+that fails) and open a window displaying a spinning green triangle.
+.PP
+If no display names are specified, \fIglxheads\fP will default to opening a
+single local connection on display 0.
+.SH EXAMPLE
+To open a local connection on display 0 and two remote connections to the
+hosts \fImars\fP (display 0) and \fIvenus\fP (display 1), run glxheads with
+the following command-line:
+.PP
+.RS 3n
+.nf
+$ glxheads :0 mars:0 venus:1
+.fi
+.RE
+.SH AUTHOR
+glxheads was written by Brian Paul <brian.paul@tungstengraphics.com>.
+.PP
+This manual page was written by Thierry Reding <thierry@gilfi.de> for the
+Debian project (but may be used by others).
+

debian/glxinfo.1

@@ -0,0 +1,41 @@
+.TH glxinfo 1 "2006-11-29"
+.SH NAME
+glxinfo \- show information about the GLX implementation
+.SH SYNOPSIS
+.B glxinfo
+.RI [ options ]
+.SH DESCRIPTION
+The \fIglxinfo\fP program shows information about the OpenGL and GLX
+implementations running on a given X display.
+.PP
+The information includes details about the server- and client-side GLX
+implementation, the OpenGL and GLU implementations as well as a list
+of available GLX visuals.
+.SH OPTIONS
+.TP 8
+.B \-v
+Print visuals info in verbose form.
+.TP 8
+.B \-t
+Print verbose table.
+.TP 8
+.B \-display \fIdisplay\fP
+Specify the X display to interrogate.
+.TP 8
+.B \-h
+Print usage information.
+.TP 8
+.B \-i
+Force an indirect rendering context.
+.TP 8
+.B \-b
+Find the ``best'' visual and print it's number.
+.TP 8
+.B \-l
+Print interesting OpenGL limits.
+.SH AUTHOR
+glxinfo was written by Brian Paul <brian.paul@tungstengraphics.com>.
+.PP
+This manual page was written by Thierry Reding <thierry@gilfi.de>, for the
+Debian project (but may be used by others).
+

debian/libgl1-mesa-dev.install

@@ -0,0 +1 @@
+usr/lib/libGL.so

debian/libgl1-mesa-dri-i686.install

@@ -0,0 +1 @@
+usr/lib/dri/i686/cmov/*.so

debian/libgl1-mesa-dri.install

@@ -0,0 +1 @@
+usr/lib/dri/*.so

debian/libgl1-mesa-glx-i686.install

@@ -0,0 +1 @@
+usr/lib/glx/i686/cmov/libGL.so.* usr/lib/i686/cmov

debian/libgl1-mesa-glx.install

@@ -0,0 +1 @@
+usr/lib/glx/libGL.so.* usr/lib

debian/libgl1-mesa-glx.shlibs

@@ -0,0 +1 @@
+libGL 1 libgl1-mesa-glx | libgl1

debian/libgl1-mesa-swx11-dev.install

@@ -0,0 +1,2 @@
+usr/lib/libGL.a
+usr/lib/libGL.so

debian/libgl1-mesa-swx11-i686.install

@@ -0,0 +1 @@
+usr/lib/i686/cmov/libGL.so.*

debian/libgl1-mesa-swx11-i686.shlibs

@@ -0,0 +1 @@
+libGL 1 libgl1-mesa-glx | libgl1

debian/libgl1-mesa-swx11.install

@@ -0,0 +1 @@
+usr/lib/libGL.so.*

debian/libgl1-mesa-swx11.shlibs

@@ -0,0 +1 @@
+libGL 1 libgl1-mesa-glx | libgl1

debian/libglu1-mesa-dev.install

@@ -0,0 +1,4 @@
+usr/include/GL/glu.h
+usr/include/GL/glu_mangle.h
+usr/lib/libGLU.a
+usr/lib/libGLU.so

debian/libglu1-mesa.install

@@ -0,0 +1 @@
+usr/lib/libGLU.so.*

debian/libglu1-mesa.shlibs

@@ -0,0 +1 @@
+libGLU 1 libglu1-mesa | libglu1

debian/libglw1-mesa-dev.install

@@ -0,0 +1,3 @@
+usr/include/GL/GLw*A.h
+usr/lib/libGLw.a
+usr/lib/libGLw.so

debian/libglw1-mesa.install

@@ -0,0 +1 @@
+usr/lib/libGLw.so.*

debian/libglw1-mesa.shlibs

@@ -0,0 +1 @@
+libGLw 1 libglw1-mesa | libglw1

debian/libosmesa6-dev.install

@@ -0,0 +1,7 @@
+usr/include/GL/osmesa.h
+usr/lib/libOSMesa.a
+usr/lib/libOSMesa.so
+usr/lib/libOSMesa16.a
+usr/lib/libOSMesa16.so
+usr/lib/libOSMesa32.a
+usr/lib/libOSMesa32.so

debian/libosmesa6.install

@@ -0,0 +1,3 @@
+usr/lib/libOSMesa.so.*
+usr/lib/libOSMesa16.so.*
+usr/lib/libOSMesa32.so.*

debian/libosmesa6.shlibs

@@ -0,0 +1,3 @@
+libOSMesa 6 libosmesa6 (>= 6.5.2-1) | libgl1-mesa-glide3
+libOSMesa16 6 libosmesa6 (>= 6.5.2-1)
+libOSMesa32 6 libosmesa6 (>= 6.5.2-1)

debian/mesa-common-dev.docs

@@ -0,0 +1,8 @@
+docs/bugs.html
+docs/debugging.html
+docs/envvars.html
+docs/faq.html
+docs/osmesa.html
+docs/RELNOTES-*
+docs/relnotes*
+docs/*.spec

debian/mesa-common-dev.install

@@ -0,0 +1,4 @@
+usr/include/GL/gl.h
+usr/include/GL/glext.h
+usr/include/GL/gl_mangle.h
+usr/include/GL/glx*.h

debian/mesa-swx11-source.install

@@ -0,0 +1 @@
+usr/share/mesa-source/*

debian/mesa-utils.install

@@ -0,0 +1,4 @@
+usr/bin/glxdemo
+usr/bin/glxgears
+usr/bin/glxheads
+usr/bin/glxinfo

debian/mesa-utils.manpages

@@ -0,0 +1,4 @@
+debian/glxdemo.1
+debian/glxgears.1
+debian/glxheads.1
+debian/glxinfo.1

debian/patches/00_create-libdir.patch

@@ -0,0 +1,17 @@
+Patch that allows the Mesa makefile to create a LIB_DIR that is more than one
+level below TOP.
+
+This patch by Thierry Reding.
+Not submitted to Mesa.
+
+--- a/src/Makefile
++++ b/src/Makefile
+@@ -29,7 +29,7 @@
+ 	done
+ 
+ $(TOP)/$(LIB_DIR):
+-	-mkdir $(TOP)/$(LIB_DIR)
++	mkdir -p $(TOP)/$(LIB_DIR)
+ 
+ 
+ clean:

debian/patches/01_fix-makefile.patch

@@ -0,0 +1,18 @@
+Do not build OSMesa for a standalone configuration, since Debian only ships
+OSMesa in a separate package.
+
+This patch by Thierry Reding.
+
+Index: mesa/src/mesa/Makefile
+===================================================================
+--- mesa.orig/src/mesa/Makefile	2007-04-25 01:44:31.000000000 +0200
++++ mesa/src/mesa/Makefile	2007-04-25 01:44:58.000000000 +0200
+@@ -105,7 +105,7 @@
+ 	$(OSMESA_DRIVER_OBJECTS)
+ 
+ 
+-stand-alone: depend subdirs $(TOP)/$(LIB_DIR)/$(GL_LIB_NAME) $(TOP)/$(LIB_DIR)/$(OSMESA_LIB_NAME)
++stand-alone: depend subdirs $(TOP)/$(LIB_DIR)/$(GL_LIB_NAME)
+ 
+ osmesa-only: depend subdirs $(TOP)/$(LIB_DIR)/$(OSMESA_LIB_NAME)
+ 

debian/patches/02_use-ieee-fp-on-s390-and-m68k.patch

@@ -0,0 +1,19 @@
+Patch that fixes Debian bug #349437.
+
+This patch by David Nusinow.
+
+Index: mesa/src/mesa/main/imports.h
+===================================================================
+--- mesa.orig/src/mesa/main/imports.h	2007-04-25 01:44:31.000000000 +0200
++++ mesa/src/mesa/main/imports.h	2007-04-25 01:45:04.000000000 +0200
+@@ -158,8 +158,9 @@
+  *** USE_IEEE: Determine if we're using IEEE floating point
+  ***/
+ #if defined(__i386__) || defined(__386__) || defined(__sparc__) || \
+-    defined(__s390x__) || defined(__powerpc__) || \
++    defined(__s390__) || defined(__s390x__) || defined(__powerpc__) || \
+     defined(__amd64__) || defined(__x86_64__) || \
++    defined(__m68k__) || \
+     defined(ia64) || defined(__ia64__) || \
+     defined(__hppa__) || defined(hpux) || \
+     defined(__mips) || defined(_MIPS_ARCH) || \

debian/patches/03_optional-progs-and-install.patch

@@ -0,0 +1,51 @@
+Allow the programs that are to be built to be defined in the build
+configuration.
+
+Provide an install target for installing the programs in $(INSTALL_DIR)/bin.
+
+This patch by Thierry Reding.
+Not submitted to Mesa.
+--
+Also remove references to GLU library since it is not required
+and we don't actually build it at this point.
+
+
+--- mesa.orig/progs/xdemos/Makefile
++++ mesa/progs/xdemos/Makefile
+@@ -10,7 +10,7 @@
+ 
+ LIBS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) $(APP_LIB_DEPS)
+ 
+-PROGS = \
++PROGS ?= \
+ 	glthreads \
+ 	glxdemo \
+ 	glxgears \
+@@ -55,6 +55,11 @@
+ extra: $(EXTRA_PROGS)
+ 
+ 
++install: $(PROGS)
++	$(INSTALL) -d $(DESTDIR)$(INSTALL_DIR)/bin
++	$(INSTALL) -m 755 $(PROGS) $(DESTDIR)$(INSTALL_DIR)/bin
++
++
+ clean:
+ 	-rm -f $(PROGS) $(EXTRA_PROGS)
+ 	-rm -f *.o *~
+--- mesa.orig/progs/Makefile
++++ mesa/progs/Makefile
+@@ -21,8 +21,12 @@
+ 		fi \
+ 	done
+ 
+-# Dummy install target
+ install:
++	@for dir in $(SUBDIRS) ; do \
++		if [ -d $$dir ] ; then \
++			(cd $$dir ; $(MAKE) install) ; \
++		fi \
++	done
+ 
+ clean:
+ 	@for dir in $(SUBDIRS) tests ; do \

debian/patches/04_debian-configs.patch

@@ -0,0 +1,892 @@
+---
+ configs/debian-default                    |   17 ++++++
+ configs/debian-dri-amd64                  |    9 +++
+ configs/debian-dri-any                    |    9 +++
+ configs/debian-dri-default                |   36 ++++++++++++++
+ configs/debian-dri-i386                   |    9 +++
+ configs/debian-dri-i386-i686              |   14 +++++
+ configs/debian-dri-optimized-default      |   13 +++++
+ configs/debian-indirect-default           |    7 ++
+ configs/debian-indirect-hurd-i386         |    9 +++
+ configs/debian-osmesa                     |    9 +++
+ configs/debian-osmesa-default             |   10 ++++
+ configs/debian-osmesa-static              |    9 +++
+ configs/debian-osmesa16                   |   10 ++++
+ configs/debian-osmesa16-static            |   10 ++++
+ configs/debian-osmesa32                   |   10 ++++
+ configs/debian-osmesa32-static            |   10 ++++
+ configs/debian-swx11+glu-alpha-ev5        |   12 ++++
+ configs/debian-swx11+glu-amd64            |   10 ++++
+ configs/debian-swx11+glu-any              |    9 +++
+ configs/debian-swx11+glu-default          |   14 +++++
+ configs/debian-swx11+glu-i386             |   10 ++++
+ configs/debian-swx11+glu-i386-i686        |   14 +++++
+ configs/debian-swx11+glu-powerpc-603      |   13 +++++
+ configs/debian-swx11+glu-ppc64            |   11 ++++
+ configs/debian-swx11+glu-sparc            |   10 ++++
+ configs/debian-swx11+glu-sparc-ultrasparc |   13 +++++
+ configs/debian-swx11+glu-static-amd64     |   10 ++++
+ configs/debian-swx11+glu-static-any       |   10 ++++
+ configs/debian-swx11+glu-static-i386      |   10 ++++
+ configs/debian-swx11+glu-static-ppc64     |   11 ++++
+ configs/default-bp                        |   75 ++++++++++++++++++++++++++++++
+ configs/linux-dri-bp                      |   55 ++++++++++++++++++++++
+ configs/linux-osmesa                      |   14 ++++-
+ configs/linux-osmesa-static               |   15 ++++++
+ configs/linux-osmesa16                    |   20 +-------
+ configs/linux-osmesa16-static             |   19 -------
+ configs/linux-osmesa32                    |   17 +-----
+ configs/linux-osmesa32-static             |   13 +++++
+ configs/linux-tcc                         |   22 ++++++++
+ 39 files changed, 550 insertions(+), 48 deletions(-)
+
+Index: mesa/configs/debian-default
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/debian-default	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,17 @@
++# Define Debian-specific defaults.
++
++CONFIG_NAME = debian-default
++
++OPT_FLAGS = -O2 -g
++
++# override settings in configs/linux-x86-64
++LIB_DIR = lib
++EXTRA_LIB_PATH =
++
++SRC_DIRS = mesa
++PROGRAM_DIRS =
++
++INSTALL_DIR = /usr
++
++# vim: ft=make
++
+Index: mesa/configs/debian-dri-amd64
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/debian-dri-amd64	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,9 @@
++# Configuration for building the DRI drivers on i386.
++
++include $(TOP)/configs/linux-dri-x86-64
++include $(TOP)/configs/debian-dri-default
++
++CONFIG_NAME = debian-dri-amd64
++
++# vim: ft=make
++
+Index: mesa/configs/debian-dri-any
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/debian-dri-any	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,9 @@
++# Configuration for building the DRI drivers on the build architecture.
++
++include $(TOP)/configs/linux-dri
++include $(TOP)/configs/debian-dri-default
++
++CONFIG_NAME = debian-dri-any
++
++# vim: ft=make
++
+Index: mesa/configs/debian-dri-default
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/debian-dri-default	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,36 @@
++# Configuration defaults for building the DRI drivers and DRI/GLX-enabled
++# libGL.
++
++include $(TOP)/configs/debian-default
++
++CONFIG_NAME = debian-dri-default
++
++SRC_DIRS = glx/x11 mesa progs
++DRIVER_DIRS = dri
++PROGRAM_DIRS = xdemos
++PROGS = glxdemo \
++        glxgears \
++        glxheads \
++        glxinfo
++
++LIB_DIR = lib/glx
++
++DRI_DRIVER_INSTALL_DIR = $(INSTALL_DIR)/lib/dri
++DRI_DRIVER_SEARCH_DIR = /usr/lib/dri
++
++DRI_DIRS = mach64 mga r128 r200 r300 radeon s3v savage tdfx trident
++
++ARCH_X86 = i386 amd64
++
++ifneq ($(findstring $(DEB_BUILD_ARCH), $(ARCH_X86)),)
++	DRI_DIRS += i810 i915 i915tex i965 sis unichrome
++endif
++
++ifeq ($(DEB_BUILD_ARCH), sparc)
++	DRI_DIRS += ffb
++endif
++
++APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB)
++
++# vim: ft=make
++
+Index: mesa/configs/debian-dri-i386
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/debian-dri-i386	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,9 @@
++# Configuration for building the DRI drivers on i386.
++
++include $(TOP)/configs/linux-dri-x86
++include $(TOP)/configs/debian-dri-default
++
++CONFIG_NAME = debian-dri-i386
++
++# vim: ft=make
++
+Index: mesa/configs/debian-dri-i386-i686
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/debian-dri-i386-i686	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,14 @@
++# Configuration for building the DRI drivers on i386.
++
++include $(TOP)/configs/linux-dri-x86
++include $(TOP)/configs/debian-dri-optimized-default
++
++CONFIG_NAME = debian-dri-i386-i686
++
++ARCH_FLAGS = -march=i686
++LIB_DIR = lib/glx/i686/cmov
++
++DRI_DRIVER_INSTALL_DIR = $(INSTALL_DIR)/lib/dri/i686/cmov
++
++# vim: ft=make
++
+Index: mesa/configs/debian-dri-optimized-default
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/debian-dri-optimized-default	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,13 @@
++# Configuration defaults for CPU-optimized builds of the DRI drivers and
++# DRI/GLX-enabled libGL.
++
++include $(TOP)/configs/debian-dri-default
++
++CONFIG_NAME = debian-dri-optimized-default
++
++# override so that the utility programs are not rebuilt with CPU-specific
++# optimizations
++SRC_DIRS = glx/x11 mesa
++
++# vim: ft=make
++
+Index: mesa/configs/debian-indirect-default
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/debian-indirect-default	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,7 @@
++# Configuration defaults for building GLX-enabled libGL.
++
++include $(TOP)/configs/debian-dri-default
++
++CONFIG_NAME = debian-indirect-default
++
++DRI_DIRS = 
+Index: mesa/configs/debian-indirect-hurd-i386
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/debian-indirect-hurd-i386	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,9 @@
++# Configuration for building the DRI drivers on the build architecture.
++
++include $(TOP)/configs/linux-indirect
++include $(TOP)/configs/debian-indirect-default
++
++CONFIG_NAME = debian-indirect-hurd-i386
++
++# vim: ft=make
++
+Index: mesa/configs/debian-osmesa
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/debian-osmesa	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,9 @@
++# Configuration for building only OSMesa on Debian.
++
++include $(TOP)/configs/linux-osmesa
++include $(TOP)/configs/debian-osmesa-default
++
++CONFIG_NAME = debian-osmesa
++
++# vim: ft=make
++
+Index: mesa/configs/debian-osmesa-default
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/debian-osmesa-default	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,10 @@
++# Configuration defaults for building OSMesa.
++
++include $(TOP)/configs/debian-default
++
++CONFIG_NAME = debian-osmesa-default
++
++DRIVER_DIRS = osmesa
++
++# vim: ft=make
++
+Index: mesa/configs/debian-osmesa-static
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/debian-osmesa-static	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,9 @@
++# Configuration for building only OSMesa (static version) on Debian.
++
++include $(TOP)/configs/linux-osmesa-static
++include $(TOP)/configs/debian-osmesa-default
++
++CONFIG_NAME = debian-osmesa-static
++
++# vim: ft=make
++
+Index: mesa/configs/debian-osmesa16
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/debian-osmesa16	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,10 @@
++# Configuration for building OSMesa with support for 16 bits per color
++# channel.
++
++include $(TOP)/configs/linux-osmesa16
++include $(TOP)/configs/debian-osmesa-default
++
++CONFIG_NAME = debian-osmesa16
++
++# vim: ft=make
++
+Index: mesa/configs/debian-osmesa16-static
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/debian-osmesa16-static	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,10 @@
++# Configuration for building a static version of OSMesa with support for 16
++# bits per color channel.
++
++include $(TOP)/configs/linux-osmesa16-static
++include $(TOP)/configs/debian-osmesa-default
++
++CONFIG_NAME = debian-osmesa16-static
++
++# vim: ft=make
++
+Index: mesa/configs/debian-osmesa32
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/debian-osmesa32	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,10 @@
++# Configuration for building OSMesa with support for 32 bits per color
++# channel.
++
++include $(TOP)/configs/linux-osmesa32
++include $(TOP)/configs/debian-osmesa-default
++
++CONFIG_NAME = debian-osmesa32
++
++# vim: ft=make
++
+Index: mesa/configs/debian-osmesa32-static
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/debian-osmesa32-static	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,10 @@
++# Configuration for building a static version of OSMesa with support for 32
++# bits per color channel.
++
++include $(TOP)/configs/linux-osmesa32-static
++include $(TOP)/configs/debian-osmesa-default
++
++CONFIG_NAME = debian-osmesa32-static
++
++# vim: ft=make
++
+Index: mesa/configs/debian-swx11+glu-alpha-ev5
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/debian-swx11+glu-alpha-ev5	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,12 @@
++# Configuration for building Mesa (swx11 and GLU) on alpha (ev5 optimized).
++
++include $(TOP)/configs/linux-alpha
++include $(TOP)/configs/debian-swx11+glu-default
++
++CONFIG_NAME = debian-swx11+glu-alpha-ev5
++
++SRC_DIRS = mesa
++LIB_DIR = lib/ev5/cmov
++
++# vim: ft=make
++
+Index: mesa/configs/debian-swx11+glu-amd64
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/debian-swx11+glu-amd64	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,10 @@
++# Configuration for building Mesa (swx11 and GLU) with runtime-detected
++# assembler optimizations on amd64.
++
++include $(TOP)/configs/linux-x86-64
++include $(TOP)/configs/debian-swx11+glu-default
++
++CONFIG_NAME = debian-swx11+glu-amd64
++
++# vim: ft=make
++
+Index: mesa/configs/debian-swx11+glu-any
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/debian-swx11+glu-any	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,9 @@
++# Configuration for building Mesa (swx11 and GLU) on the build architecture.
++
++include $(TOP)/configs/linux
++include $(TOP)/configs/debian-swx11+glu-default
++
++CONFIG_NAME = debian-swx11+glu-any
++
++# vim: ft=make
++
+Index: mesa/configs/debian-swx11+glu-default
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/debian-swx11+glu-default	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,14 @@
++# Configuration defaults for building Mesa (swx11 and GLU).
++
++include $(TOP)/configs/debian-default
++
++CONFIG_NAME = debian-swx11+glu-default
++
++SRC_DIRS = mesa glu glw
++DRIVER_DIRS = x11
++
++GLW_SOURCES += GLwMDrawA.c
++GLW_LIB_DEPS += -lXm
++
++# vim: ft=make
++
+Index: mesa/configs/debian-swx11+glu-i386
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/debian-swx11+glu-i386	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,10 @@
++# Configuration for building Mesa (swx11 and GLU) with runtime-detected
++# assembler optimizations on i386.
++
++include $(TOP)/configs/linux-x86
++include $(TOP)/configs/debian-swx11+glu-default
++
++CONFIG_NAME = debian-swx11+glu-i386
++
++# vim: ft=make
++
+Index: mesa/configs/debian-swx11+glu-i386-i686
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/debian-swx11+glu-i386-i686	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,14 @@
++# Configuration for building Mesa (swx11 and GLU) with runtime-detected
++# assembler optimizations on i386 (i686 optimized).
++
++include $(TOP)/configs/linux-x86
++include $(TOP)/configs/debian-swx11+glu-default
++
++CONFIG_NAME = debian-swx11+glu-i386-i686
++
++ARCH_FLAGS += -march=i686
++SRC_DIRS = mesa
++LIB_DIR = lib/i686/cmov
++
++# vim: ft=make
++
+Index: mesa/configs/debian-swx11+glu-powerpc-603
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/debian-swx11+glu-powerpc-603	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,13 @@
++# Configuration for building Mesa (swx11 and GLU) with runtime-detected
++# assembler optimizations on powerpc (603 optimized).
++
++include $(TOP)/configs/linux-ppc
++include $(TOP)/configs/debian-swx11+glu-default
++
++CONFIG_NAME = debian-swx11+glu-powerpc-603
++
++SRC_DIRS = mesa
++LIB_DIR = lib/603/cmov
++
++# vim: ft=make
++
+Index: mesa/configs/debian-swx11+glu-ppc64
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/debian-swx11+glu-ppc64	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,11 @@
++# Configuration for building Mesa (swx11 and GLU) with runtime-detected
++# assembler optimizations on ppc64.
++
++include $(TOP)/configs/debian-swx11+glu-any
++
++CONFIG_NAME = debian-swx11+glu-ppc64
++
++LIB_DIR = lib64
++
++# vim: ft=make
++
+Index: mesa/configs/debian-swx11+glu-sparc
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/debian-swx11+glu-sparc	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,10 @@
++# Configuration for building Mesa (swx11 and GLU) with runtime-detected
++# assembler optimizations on sparc.
++
++include $(TOP)/configs/linux-sparc
++include $(TOP)/configs/debian-swx11+glu-default
++
++CONFIG_NAME = debian-swx11+glu-sparc
++
++# vim: ft=make
++
+Index: mesa/configs/debian-swx11+glu-sparc-ultrasparc
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/debian-swx11+glu-sparc-ultrasparc	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,13 @@
++# Configuration for building Mesa (swx11 and GLU) with runtime-detected
++# assembler optimizations on sparc (ultrasparc-optimized).
++
++include $(TOP)/configs/linux-ultrasparc
++include $(TOP)/configs/debian-swx11+glu-default
++
++CONFIG_NAME = debian-swx11+glu-sparc-ultrasparc
++
++SRC_DIRS = mesa
++LIB_DIR = lib/ultrasparc/cmov
++
++# vim: ft=make
++
+Index: mesa/configs/debian-swx11+glu-static-amd64
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/debian-swx11+glu-static-amd64	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,10 @@
++# Configuration for building static versions of the libraries (swx11 and GLU)
++# on amd64.
++
++include $(TOP)/configs/linux-x86-64-static
++include $(TOP)/configs/debian-swx11+glu-default
++
++CONFIG_NAME = debian-swx11+glu-static-amd64
++
++# vim: ft=make
++
+Index: mesa/configs/debian-swx11+glu-static-any
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/debian-swx11+glu-static-any	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,10 @@
++# Configuration for building static versions of the libraries (swx11 and GLU)
++# on the build architecture.
++
++include $(TOP)/configs/linux-static
++include $(TOP)/configs/debian-swx11+glu-default
++
++CONFIG_NAME = debian-swx11+glu-static-any
++
++# vim: ft=make
++
+Index: mesa/configs/debian-swx11+glu-static-i386
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/debian-swx11+glu-static-i386	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,10 @@
++# Configuration for building static versions of the libraries (swx11 and GLU)
++# on i386.
++
++include $(TOP)/configs/linux-x86-static
++include $(TOP)/configs/debian-swx11+glu-default
++
++CONFIG_NAME = debian-swx11+glu-static-i386
++
++# vim: ft=make
++
+Index: mesa/configs/debian-swx11+glu-static-ppc64
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/debian-swx11+glu-static-ppc64	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,11 @@
++# Configuration for building static versions of the libraries (swx11 and GLU)
++# on ppc64.
++
++include $(TOP)/configs/debian-swx11+glu-static-any
++
++CONFIG_NAME = debian-swx11+glu-static-ppc64
++
++LIB_DIR = lib64
++
++# vim: ft=make
++
+Index: mesa/configs/default-bp
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/default-bp	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,75 @@
++# Default/template configuration
++
++# This is included by other config files which may override some
++# of these variables.
++
++CONFIG_NAME = default
++
++# Version info
++MESA_MAJOR=6
++MESA_MINOR=3
++MESA_TINY=0
++
++# external projects
++#DRM_SOURCE_PATH=$(TOP)/../drm
++DRM_SOURCE_PATH=/home/projects/DRI-freedesktop/drm
++
++# Compiler and flags
++CC = cc
++CXX = CC
++CFLAGS = -O
++CXXFLAGS = -O
++GLU_CFLAGS = 
++
++# Misc tools and flags
++MKLIB_OPTIONS = 
++MKDEP = makedepend
++MKDEP_OPTIONS = -fdepend
++MAKE = make
++
++# Library names (base name)
++GL_LIB = GL
++GLU_LIB = GLU
++GLUT_LIB = glut
++GLW_LIB = GLw
++OSMESA_LIB = OSMesa
++
++
++# Library names (actual file names)
++GL_LIB_NAME = lib$(GL_LIB).so
++GLU_LIB_NAME = lib$(GLU_LIB).so
++GLUT_LIB_NAME = lib$(GLUT_LIB).so
++GLW_LIB_NAME = lib$(GLW_LIB).so
++OSMESA_LIB_NAME = lib$(OSMesa).so
++
++
++# Optional assembly language optimization files for libGL
++ASM_SOURCES = 
++
++# GLw widget sources (Append "GLwMDrawA.c" here and add -lXm to GLW_LIB_DEPS in
++# order to build the Motif widget too)
++GLW_SOURCES = GLwDrawA.c
++
++
++# Directories
++LIB_DIR = $(TOP)/lib
++INSTALL_PREFIX = /usr/local
++SRC_DIRS = mesa glu glut/glx glw
++GLU_DIRS = sgi
++DRIVER_DIRS = x11 osmesa
++# Which subdirs under $(TOP)/progs/ to enter:
++PROGRAM_DIRS = demos redbook samples xdemos
++
++
++# Library/program dependencies
++GL_LIB_DEPS = -lX11 -lXext -lm -lpthread
++OSMESA_LIB_DEPS = -L$(LIB_DIR) -l$(GL_LIB)
++GLU_LIB_DEPS = -L$(LIB_DIR) -l$(GL_LIB) -lm
++GLUT_LIB_DEPS = -L$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -lX11 -lXmu -lXt -lXi -lm
++GLW_LIB_DEPS = -L$(LIB_DIR) -l$(GL_LIB) -lXt -lX11
++APP_LIB_DEPS = -L$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm
++
++
++# Shading language support (set to 0 or 1)
++SHADING_LANGUAGE = 0
++
+Index: mesa/configs/linux-dri-bp
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/linux-dri-bp	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,55 @@
++# -*-makefile-*-
++# Configuration for linux-dri: Linux DRI hardware drivers for XFree86 & others
++
++include $(TOP)/configs/default
++
++CONFIG_NAME = linux-dri
++
++# Compiler and flags
++CC = gcc
++CXX = g++
++
++MKDEP = /usr/X11R6/bin/makedepend
++#MKDEP = gcc -M
++#MKDEP_OPTIONS = -MF depend
++
++WARN_FLAGS = -Wall
++OPT_FLAGS  = -g
++PIC_FLAGS  = -fPIC
++
++# Add '-DGLX_USE_TLS' to ARCH_FLAGS to enable TLS support.
++ARCH_FLAGS ?=
++
++DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
++	-D_BSD_SOURCE -D_GNU_SOURCE \
++	-DDRI_NEW_INTERFACE_ONLY -DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 
++
++X11_INCLUDES = -I/usr/X11R6/include -I/usr/X11R6/include/X11/extensions
++
++CFLAGS   = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \
++	$(ASM_FLAGS) -std=c99 -ffast-math 
++
++CXXFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
++
++
++ASM_SOURCES = 
++
++# Library/program dependencies
++EXTRA_LIB_PATH=-L/usr/X11R6/lib
++
++DRI_LIB_DEPS  = $(EXTRA_LIB_PATH) -lm -lpthread -lexpat -ldl
++GL_LIB_DEPS   = $(EXTRA_LIB_PATH) -lX11 -lXext -lXxf86vm -lm -lpthread -ldl
++GLUT_LIB_DEPS = $(EXTRA_LIB_PATH) -L$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB)  -lX11 -lXmu -lXt -lXi -lm
++GLW_LIB_DEPS  = $(EXTRA_LIB_PATH) -L$(LIB_DIR) -l$(GL_LIB) -lXt -lX11
++
++
++# Directories
++SRC_DIRS = glx/x11 mesa glu glut/glx glw
++DRIVER_DIRS = dri
++PROGRAM_DIRS = 
++WINDOW_SYSTEM=dri
++
++# ffb and gamma are missing because they have not been converted to use the new
++# interface.
++DRI_DIRS = dri_client i810 i830 i915 mach64 mga r128 r200 radeon s3v \
++	savage sis tdfx trident unichrome fb
+Index: mesa/configs/linux-osmesa-static
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/linux-osmesa-static	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,15 @@
++# Configuration for building only libOSMesa on Linux, no Xlib driver
++# This doesn't really have any Linux dependencies, so it should be usable
++# on other (gcc-based) systems.
++
++include $(TOP)/configs/linux-osmesa
++
++CONFIG_NAME = linux-osmesa-static
++
++# Compiler and flags
++MKLIB_OPTIONS = -static
++PIC_FLAGS =
++
++# Library names
++OSMESA_LIB_NAME = lib$(OSMESA_LIB).a
++
+Index: mesa/configs/linux-osmesa32-static
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/linux-osmesa32-static	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,13 @@
++# Configuration for 32 bits/channel OSMesa library on Linux
++
++include $(TOP)/configs/linux-osmesa32
++
++CONFIG_NAME = linux-osmesa32-static
++
++# Compiler and flags
++MKLIB_OPTIONS = -static
++PIC_FLAGS =
++
++# Library names
++OSMESA_LIB_NAME = lib$(OSMESA_LIB).a
++
+Index: mesa/configs/linux-tcc
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ mesa/configs/linux-tcc	2008-06-17 19:27:49.000000000 +0200
+@@ -0,0 +1,22 @@
++# Configuration for debugging on Linux
++
++include $(TOP)/configs/default
++
++CONFIG_NAME = linux-tcc
++
++# Compiler and flags
++CC = gcc
++CXX = g++
++
++TCC_DIR=/home/progs/tcc-0.9.20
++
++CFLAGS = -g -ansi -pedantic -Wall -Wmissing-prototypes -Wundef -fPIC -ffast-math -D_POSIX_SOURCE -D_SVID_SOURCE -D_BSD_SOURCE -I/usr/X11R6/include -DUSE_XSHM -DPTHREADS -DDEBUG -DMESA_DEBUG -DUSE_TCC -I$(TCC_DIR)
++
++CXXFLAGS = -g -ansi -pedantic -Wall -Wundef -fPIC -ffast-math -D_POSIX_SOURCE -D_SVID_SOURCE -D_BSD_SOURCE -DDEBUG -DMESA_DEBUG
++
++GLUT_CFLAGS = -fexceptions
++
++GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread -L$(TCC_DIR) -ltcc -ldl
++GLUT_LIB_DEPS = -L$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
++GLW_LIB_DEPS = -L$(LIB_DIR) -l$(GL_LIB) -lXt -L/usr/X11R6/lib -lX11
++APP_LIB_DEPS = -L$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm
+Index: mesa/configs/linux-osmesa
+===================================================================
+--- mesa.orig/configs/linux-osmesa	2008-06-16 00:50:38.000000000 +0200
++++ mesa/configs/linux-osmesa	2008-06-17 19:27:49.000000000 +0200
+@@ -9,8 +9,17 @@
+ # Compiler and flags
+ CC = gcc
+ CXX = g++
+-CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DPTHREADS
+-CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
++
++PIC_FLAGS  = -fPIC
++
++DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
++	-D_BSD_SOURCE -D_GNU_SOURCE \
++	-DPTHREADS -DUSE_XSHM -DHAVE_POSIX_MEMALIGN
++
++CFLAGS = -ansi -pedantic $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \
++	$(ASM_FLAGS) -ffast-math
++
++CXXFLAGS = -ansi -pedantic $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
+ 
+ # Work around aliasing bugs - developers should comment this out
+ CFLAGS += -fno-strict-aliasing
+@@ -26,3 +35,4 @@
+ OSMESA_LIB_DEPS = -lm -lpthread
+ GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
+ APP_LIB_DEPS = -lOSMesa -lGLU
++
+Index: mesa/configs/linux-osmesa16
+===================================================================
+--- mesa.orig/configs/linux-osmesa16	2008-06-16 00:50:38.000000000 +0200
++++ mesa/configs/linux-osmesa16	2008-06-17 19:27:49.000000000 +0200
+@@ -1,31 +1,19 @@
+ # Configuration for 16 bits/channel OSMesa library on Linux
+ 
+-include $(TOP)/configs/default
++include $(TOP)/configs/linux-osmesa
+ 
+ CONFIG_NAME = linux-osmesa16
+ 
+-# Compiler and flags
+-CC = gcc
+-CXX = g++
+-CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS -I/usr/X11R6/include -DCHAN_BITS=16 -DDEFAULT_SOFTWARE_DEPTH_BITS=31
+-CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
+-
+ # Work around aliasing bugs - developers should comment this out
+ CFLAGS += -fno-strict-aliasing
+ CXXFLAGS += -fno-strict-aliasing
+-
++DEFINES += -DCHAN_BITS=16 -DDEFAULT_SOFTWARE_DEPTH_BITS=32
+ # Library names
+ OSMESA_LIB = OSMesa16
+-OSMESA_LIB_NAME = libOSMesa16.so
+-
+ 
+ # Directories
+-SRC_DIRS = mesa glu
+-DRIVER_DIRS = osmesa
+ PROGRAM_DIRS = 
+ 
+-
+ # Dependencies
+-OSMESA_LIB_DEPS = -lm -lpthread
+-GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
+-APP_LIB_DEPS = -lOSMesa16
++APP_LIB_DEPS = -l$(OSMESA_LIB)
++
+Index: mesa/configs/linux-osmesa16-static
+===================================================================
+--- mesa.orig/configs/linux-osmesa16-static	2008-06-16 00:50:38.000000000 +0200
++++ mesa/configs/linux-osmesa16-static	2008-06-17 19:27:49.000000000 +0200
+@@ -1,14 +1,10 @@
+ # Configuration for 16 bits/channel OSMesa library on Linux
+ 
+-include $(TOP)/configs/default
++include $(TOP)/configs/linux-osmesa16
+ 
+ CONFIG_NAME = linux-osmesa16-static
+ 
+ # Compiler and flags
+-CC = gcc
+-CXX = g++
+-CFLAGS = -O3 -ansi -pedantic -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS -I/usr/X11R6/include -DCHAN_BITS=16 -DDEFAULT_SOFTWARE_DEPTH_BITS=31
+-CXXFLAGS = -O3 -ansi -pedantic -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
+ MKLIB_OPTIONS = -static
+ PIC_FLAGS =
+ 
+@@ -17,16 +13,5 @@
+ CXXFLAGS += -fno-strict-aliasing
+ 
+ # Library names
+-OSMESA_LIB = OSMesa16
+-OSMESA_LIB_NAME = libOSMesa16.a
++OSMESA_LIB_NAME = lib$(OSMESA_LIB).a
+ 
+-
+-# Directories
+-SRC_DIRS = mesa glu
+-DRIVER_DIRS = osmesa
+-PROGRAM_DIRS = 
+-
+-
+-# Dependencies
+-OSMESA_LIB_DEPS = -lm -lpthread
+-APP_LIB_DEPS = -lOSMesa16
+Index: mesa/configs/linux-osmesa32
+===================================================================
+--- mesa.orig/configs/linux-osmesa32	2008-06-16 00:50:38.000000000 +0200
++++ mesa/configs/linux-osmesa32	2008-06-17 19:27:49.000000000 +0200
+@@ -1,31 +1,22 @@
+ # Configuration for 32 bits/channel OSMesa library on Linux
+ 
+-include $(TOP)/configs/default
++include $(TOP)/configs/linux-osmesa
+ 
+ CONFIG_NAME = linux-osmesa32
+ 
+ # Compiler and flags
+-CC = gcc
+-CXX = g++
+-CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS -I/usr/X11R6/include -DCHAN_BITS=32 -DDEFAULT_SOFTWARE_DEPTH_BITS=31
+-CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
+ 
+ # Work around aliasing bugs - developers should comment this out
+ CFLAGS += -fno-strict-aliasing
+ CXXFLAGS += -fno-strict-aliasing
++DEFINES += -DCHAN_BITS=32 -DDEFAULT_SOFTWARE_DEPTH_BITS=31
+ 
+ # Library names
+ OSMESA_LIB = OSMesa32
+-OSMESA_LIB_NAME = libOSMesa32.so
+-
+ 
+ # Directories
+-SRC_DIRS = mesa glu
+-DRIVER_DIRS = osmesa
+ PROGRAM_DIRS = 
+ 
+-
+ # Dependencies
+-OSMESA_LIB_DEPS = -lm -lpthread
+-GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
+-APP_LIB_DEPS = -lOSMesa32
++APP_LIB_DEPS = -l$(OSMESA_LIB)
++

debian/patches/series

@@ -0,0 +1,5 @@
+00_create-libdir.patch
+01_fix-makefile.patch
+02_use-ieee-fp-on-s390-and-m68k.patch
+03_optional-progs-and-install.patch
+04_debian-configs.patch

debian/rules

@@ -0,0 +1,139 @@
+#!/usr/bin/make -f
+# debian/rules for the Debian mesa package
+# Copyright © 2006 Thierry Reding <thierry@gilfi.de>
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+STAMP_DIR = debian/stamp
+
+QUILT_STAMPFN = $(STAMP_DIR)/patch
+include /usr/share/quilt/quilt.make
+
+CFLAGS = -Wall -g
+ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
+	CFLAGS += -O0
+else
+	CFLAGS += -O2
+endif
+ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS)))
+	INSTALL_PROGRAM += -s
+endif
+
+DEB_BUILD_ARCH     ?= $(shell dpkg-architecture -qDEB_BUILD_ARCH)
+DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
+DEB_BUILD_DIR      ?= $(CURDIR)/obj-$(DEB_BUILD_GNU_TYPE)
+
+export DEB_BUILD_ARCH
+
+# choose which configurations to build
+SWX11_GLU_CONFIGS =
+DRI_CONFIGS =
+
+include debian/scripts/choose-configs
+
+# build the following configurations by default
+CONFIGS = $(SWX11_GLU_CONFIGS) \
+          $(DRI_CONFIGS) \
+          debian-osmesa \
+          debian-osmesa-static \
+          debian-osmesa16 \
+          debian-osmesa16-static \
+          debian-osmesa32 \
+          debian-osmesa32-static
+
+STAMP = $(STAMP_DIR)/$(DEB_BUILD_GNU_TYPE)
+BUILD_STAMPS = $(addprefix $(STAMP)-build-, $(CONFIGS))
+ARCH_INSTALL_STAMPS = $(addprefix $(STAMP)-install-, $(CONFIGS))
+INDEP_INSTALL_STAMPS = $(STAMP_DIR)/install-source
+
+# list the configurations that will built
+configs:
+	@echo Building the following configurations: $(CONFIGS)
+
+$(STAMP_DIR):
+	dh_testdir
+	mkdir -p $@
+
+$(QUILT_STAMPFN): $(STAMP_DIR)
+
+
+build: $(BUILD_STAMPS)
+
+$(STAMP)-build-%: patch
+	dh_testdir
+	mkdir -p $(DEB_BUILD_DIR)/$*
+	find $(CURDIR)/* -maxdepth 0 -not -path '$(DEB_BUILD_DIR)*' | \
+		xargs cp -rlf -t $(DEB_BUILD_DIR)/$*
+	ln -sf $* $(DEB_BUILD_DIR)/$*/configs/current
+	cd $(DEB_BUILD_DIR)/$* && $(MAKE)
+	touch $@
+
+pre-install:
+	dh_testdir
+	dh_testroot
+	dh_clean -k
+	rm -rf $(INSTALL_STAMPS)
+
+install: pre-install $(ARCH_INSTALL_STAMPS)
+
+$(STAMP)-install-%: $(STAMP)-build-%
+	# Add here commands to install the package into debian/tmp
+	cd $(DEB_BUILD_DIR)/$* && $(MAKE) install DESTDIR=$(CURDIR)/debian/tmp
+	touch $@
+
+$(STAMP_DIR)/install-source: pre-install
+	# install Mesa source for mesa-swx11-source package
+	chmod a+x debian/scripts/install-source.sh
+	debian/scripts/install-source.sh
+	touch $@
+
+clean: unpatch
+	dh_testdir
+	dh_testroot
+	dh_clean --exclude ./Makefile.orig
+	rm -rf $(DEB_BUILD_DIR) $(STAMP_DIR)
+
+# Build architecture-independent files here.
+binary-indep: build install $(INDEP_INSTALL_STAMPS)
+	dh_testdir
+	dh_testroot
+	dh_installchangelogs -i
+	dh_installdocs -i
+	dh_installexamples -i
+	dh_install --sourcedir=debian/tmp --list-missing -i
+	dh_installman -i
+	dh_link -i
+	dh_compress -i
+	dh_fixperms -i
+	dh_installdeb -i
+	dh_gencontrol -i
+	dh_md5sums -i
+	dh_builddeb -i
+
+# Build architecture-dependent files here.
+binary-arch: build install
+	dh_testdir
+	dh_testroot
+	dh_installchangelogs -s
+	dh_installdocs -s
+	dh_installexamples -s
+	dh_install --sourcedir=debian/tmp --list-missing -s
+	dh_installman -s
+	dh_link -s
+	dh_strip -plibgl1-mesa-swx11 --dbg-package=libgl1-mesa-swx11-dbg
+	dh_strip -plibgl1-mesa-glx --dbg-package=libgl1-mesa-glx-dbg
+	dh_strip -plibgl1-mesa-dri --dbg-package=libgl1-mesa-dri-dbg
+	dh_strip -s
+	dh_compress -s
+	dh_fixperms -s
+	dh_makeshlibs -s
+	dh_installdeb -s
+	dh_shlibdeps -s
+	dh_gencontrol -s
+	dh_md5sums -s
+	dh_builddeb -s
+
+binary: binary-indep binary-arch
+.PHONY: configs build clean binary-indep binary-arch binary install configure
+

debian/scripts/choose-configs

@@ -0,0 +1,56 @@
+# Script to choose which configurations are to be built depending on the value
+# of the DEB_BUILD_ARCH variable.
+#
+# Copyright © 2006 Thierry Reding <thierry@gilfi.de>
+
+##############################################################################
+## architecture-specific configurations ######################################
+
+# choose an architecture-specific build of swx11 and GLU if a matching
+# configuration exists
+ifneq ($(wildcard configs/debian-swx11+glu-$(DEB_BUILD_ARCH)),)
+	SWX11_GLU_CONFIGS := debian-swx11+glu-$(DEB_BUILD_ARCH)
+else
+	SWX11_GLU_CONFIGS := debian-swx11+glu-any
+endif
+
+# same for static builds
+ifneq ($(wildcard configs/debian-swx11+glu-static-$(DEB_BUILD_ARCH)),)
+	SWX11_GLU_CONFIGS += debian-swx11+glu-static-$(DEB_BUILD_ARCH)
+else
+	SWX11_GLU_CONFIGS += debian-swx11+glu-static-any
+endif
+
+# and for the GLX/DRI-enabled libGL
+ifneq ($(wildcard configs/debian-indirect-$(DEB_BUILD_ARCH)),)
+	DRI_CONFIGS := debian-indirect-$(DEB_BUILD_ARCH)
+else
+  ifneq ($(wildcard configs/debian-dri-$(DEB_BUILD_ARCH)),)
+	DRI_CONFIGS := debian-dri-$(DEB_BUILD_ARCH)
+  else
+	DRI_CONFIGS := debian-dri-any
+  endif
+endif
+
+##############################################################################
+## CPU-optimized configurations ##############################################
+
+ifeq ($(DEB_BUILD_ARCH), i386)
+	SWX11_GLU_CONFIGS += debian-swx11+glu-i386-i686
+#	DRI_CONFIGS += debian-dri-i386-i686
+endif
+
+#ifeq ($(DEB_BUILD_ARCH), alpha)
+#	SWX11_GLU_CONFIGS += debian-swx11+glu-alpha-ev5
+#endif
+
+#ifeq ($(DEB_BUILD_ARCH), powerpc)
+#	SWX11_GLU_CONFIGS += debian-swx11+glu-powerpc-603
+#endif
+
+#ifeq ($(DEB_BUILD_ARCH), sparc)
+#	SWX11_GLU_CONFIGS += debian-swx11+glu-sparc-ultrasparc
+#endif
+
+# vim: ft=make
+

debian/scripts/install-source.sh

@@ -0,0 +1,46 @@
+#!/bin/sh
+
+if [ -n "$1" ]; then
+	TOP="$1"
+else
+	TOP=`pwd`
+fi
+
+SOURCE_DIRS='
+	include/GL/internal
+	src/glx/x11
+	src/mesa/drivers/common
+	src/mesa/drivers/dri/common
+	src/mesa/drivers/dri/glcore
+	src/mesa/drivers/x11
+	src/mesa/glapi
+	src/mesa/main
+	src/mesa/math
+	src/mesa/ppc
+	src/mesa/shader
+	src/mesa/sparc
+	src/mesa/swrast_setup
+	src/mesa/swrast
+	src/mesa/tnl_dd
+	src/mesa/tnl
+	src/mesa/vbo
+	src/mesa/x86-64
+	src/mesa/x86
+'
+
+FILTER="-not -path '*/.svn*'"
+TARGET=${TOP}/debian/tmp/usr/share/mesa-source
+
+(
+	find $SOURCE_DIRS $FILTER -name '*.[ch]';
+	find include/GL $FILTER -name 'xmesa*.h';
+) | \
+	while read x; do
+		DIRNAME=`dirname "$x"`
+		mkdir -p "$TARGET/$DIRNAME"
+		cp -lf "$x" "$TARGET/$DIRNAME"
+	done
+
+# fix permissions
+find "$TARGET" -type f | xargs chmod 0644
+

debian/watch

@@ -0,0 +1,2 @@
+version=3
+http://sf.net/mesa3d/MesaLib-(.*)\.tar\.gz

docs/MESA_copy_sub_buffer.spec

@@ -16,7 +16,7 @@ Status
 
 Version
 
-    Last Modified Date:  12 January 2009
+    Last Modified Date:  8 June 2000
 
 Number
 
@@ -69,12 +69,6 @@ Additions to Chapter 3 of the GLX 1.3 Specification (Functions and Errors)
     <width> and <height> indicate the size in pixels.  Coordinate (0,0)
     corresponds to the lower-left pixel of the window, like glReadPixels.
 
-    If dpy and drawable are the display and drawable for the calling
-    thread's current context, glXCopySubBufferMESA performs an
-    implicit glFlush before it returns.  Subsequent OpenGL commands
-    may be issued immediately after calling glXCopySubBufferMESA, but
-    are not executed until the copy is completed. 
-
 GLX Protocol
 
     None at this time.  The extension is implemented in terms of ordinary
@@ -90,7 +84,5 @@ New State
 
 Revision History
 
-    12 January 2009 Ian Romanick - Added language about implicit flush
-                                   and command completion.
-    8 June 2000     Brian Paul   - initial specification
+    8 June 2000 - initial specification
 

docs/MESA_packed_depth_stencil.spec

@@ -17,6 +17,7 @@ Status
 
 Version
 
+    $Id: MESA_packed_depth_stencil.spec,v 1.2 2003/09/19 14:58:21 brianp Exp $
 
 Number
 

docs/MESA_program_debug.spec

@@ -18,6 +18,7 @@ Version
 
     Last Modified Date: July 20, 2003
     Author Revision: 1.0
+    $Date: 2004/03/25 01:42:41 $ $Revision: 1.4 $
 
 Number
 

docs/MESA_resize_buffers.spec

@@ -16,6 +16,7 @@ Status
 
 Version
 
+    $Id: MESA_resize_buffers.spec,v 1.3 2004/03/25 01:42:42 brianp Exp $
 
 Number
 

docs/MESA_shader_debug.spec

@@ -19,6 +19,7 @@ Version
 
     Last Modified Date: July 30, 2006
     Author Revision: 0.2
+    $Date: 2006/07/30 14:28:38 $ $Revision: 1.2 $
 
 Number
 

docs/MESA_sprite_point.spec

@@ -16,6 +16,7 @@ Status
 
 Version
 
+    $Id: MESA_sprite_point.spec,v 1.2 2003/09/19 14:58:21 brianp Exp $
 
 Number
 

docs/MESA_texture_array.spec

@@ -1,804 +0,0 @@
-Name
-
-    MESA_texture_array
-
-Name Strings
-
-    GL_MESA_texture_array
-
-Contact
-
-    Ian Romanick, IBM (idr 'at' us.ibm.com)
-
-IP Status
-
-    No known IP issues.
-
-Status
-
-    Shipping in Mesa 7.1
-
-Version
-
-
-Number
-
-    TBD
-
-Dependencies
-
-    OpenGL 1.2 or GL_EXT_texture3D is required.
-
-    Support for ARB_fragment_program is assumed, but not required.
-
-    Support for ARB_fragment_program_shadow is assumed, but not required.
-
-    Support for EXT_framebuffer_object is assumed, but not required.
-
-    Written based on the wording of the OpenGL 2.0 specification and
-    ARB_fragment_program_shadow but not dependent on them.
-
-Overview
-
-    There are a number of circumstances where an application may wish to
-    blend two textures out of a larger set of textures.  Moreover, in some
-    cases the selected textures may vary on a per-fragment basis within
-    a polygon.  Several examples include:
-
-       1. High dynamic range textures.  The application stores several
-       different "exposures" of an image as different textures.  On a
-       per-fragment basis, the application selects which exposures are
-       used.
-
-       2. A terrain engine where the altitude of a point determines the
-       texture applied to it.  If the transition is from beach sand to
-       grass to rocks to snow, the application will store each texture
-       in a different texture map, and dynamically select which two
-       textures to blend at run-time.
-
-       3. Storing short video clips in textures.  Each depth slice is a
-       single frame of video.
-
-    Several solutions to this problem have been proposed, but they either
-    involve using a separate texture unit for each texture map or using 3D
-    textures without mipmaps.  Both of these options have major drawbacks.
-
-    This extension provides a third alternative that eliminates the major
-    drawbacks of both previous methods.  A new texture target,
-    TEXTURE_2D_ARRAY, is added that functions identically to TEXTURE_3D in
-    all aspects except the sizes of the non-base level images.  In
-    traditional 3D texturing, the size of the N+1 LOD is half the size
-    of the N LOD in all three dimensions.  For the TEXTURE_2D_ARRAY target,
-    the height and width of the N+1 LOD is halved, but the depth is the
-    same for all levels of detail. The texture then becomes an array of
-    2D textures.  The per-fragment texel is selected by the R texture
-    coordinate.
-
-    References:
-
-        http://www.opengl.org/discussion_boards/cgi_directory/ultimatebb.cgi?ubb=get_topic;f=3;t=011557
-        http://www.opengl.org/discussion_boards/cgi_directory/ultimatebb.cgi?ubb=get_topic;f=3;t=000516
-        http://www.opengl.org/discussion_boards/cgi_directory/ultimatebb.cgi?ubb=get_topic;f=3;t=011903
-        http://www.delphi3d.net/articles/viewarticle.php?article=terraintex.htm
-
-New Procedures and Functions
-
-    All functions come directly from EXT_texture_array.
-
-    void FramebufferTextureLayerEXT(enum target, enum attachment,
-                                    uint texture, int level, int layer);
-
-New Tokens
-
-    All token names and values come directly from EXT_texture_array.
-
-    Accepted by the <cap> parameter of Enable, Disable, and IsEnabled, by
-    the <pname> parameter of GetBooleanv, GetIntegerv, GetFloatv, and
-    GetDoublev, and by the <target> parameter of TexImage3D, GetTexImage,
-    GetTexLevelParameteriv, GetTexLevelParameterfv, GetTexParameteriv, and
-    GetTexParameterfv:
-
-        TEXTURE_1D_ARRAY_EXT                            0x8C18
-        TEXTURE_2D_ARRAY_EXT                            0x8C1A
-
-    Accepted by the <target> parameter of TexImage2D, TexSubImage2D,
-    CopyTexImage2D, CopyTexSubImage2D, CompressedTexImage2D,
-    CompressedTexSubImage2D, GetTexLevelParameteriv, and 
-    GetTexLevelParameterfv:
-
-        TEXTURE_1D_ARRAY_EXT
-        PROXY_TEXTURE_1D_ARRAY_EXT                      0x8C19
-
-    Accepted by the <target> parameter of TexImage3D, TexSubImage3D,
-    CopyTexSubImage3D, CompressedTexImage3D, CompressedTexSubImage3D,
-    GetTexLevelParameteriv, and GetTexLevelParameterfv:
-
-        TEXTURE_2D_ARRAY_EXT
-        PROXY_TEXTURE_2D_ARRAY_EXT                      0x8C1B
-
-    Accepted by the <pname> parameter of GetBooleanv, GetIntegerv,
-    GetFloatv, and GetDoublev
-
-        TEXTURE_BINDING_1D_ARRAY_EXT                    0x8C1C
-        TEXTURE_BINDING_2D_ARRAY_EXT                    0x8C1D
-        MAX_ARRAY_TEXTURE_LAYERS_EXT                    0x88FF
-
-    Accepted by the <param> parameter of TexParameterf, TexParameteri,
-    TexParameterfv, and TexParameteriv when the <pname> parameter is
-    TEXTURE_COMPARE_MODE_ARB:
-
-        COMPARE_REF_DEPTH_TO_TEXTURE_EXT                0x884E
-
-    (Note:  COMPARE_REF_DEPTH_TO_TEXTURE_EXT is simply an alias for the
-    existing COMPARE_R_TO_TEXTURE token in OpenGL 2.0; the alternate name
-    reflects the fact that the R coordinate is not always used.)
-
-    Accepted by the <internalformat> parameter of TexImage3D and
-    CompressedTexImage3D, and by the <format> parameter of
-    CompressedTexSubImage3D:
-
-        COMPRESSED_RGB_S3TC_DXT1_EXT
-        COMPRESSED_RGBA_S3TC_DXT1_EXT
-        COMPRESSED_RGBA_S3TC_DXT3_EXT
-        COMPRESSED_RGBA_S3TC_DXT5_EXT
-
-    Accepted by the <pname> parameter of
-    GetFramebufferAttachmentParameterivEXT:
-
-        FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER_EXT          0x8CD4
-
-    (Note:  FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER is simply an alias for the
-    FRAMEBUFFER_ATTACHMENT_TEXTURE_3D_ZOFFSET_EXT token provided in
-    EXT_framebuffer_object.  This extension generalizes the notion of
-    "<zoffset>" to include layers of an array texture.)
-
-Additions to Chapter 2 of the OpenGL 2.0 Specification (OpenGL Operation)
-
-    None
-
-Additions to Chapter 3 of the OpenGL 2.0 Specification (Rasterization)
-
-    -- Section 3.8.1 "Texture Image Specification"
-
-       Change the first paragraph (page 150) to say (spec changes identical to
-       EXT_texture_array):
-
-       "The command
-
-         void TexImage3D(enum target, int level, int internalformat,
-                         sizei width, sizei height, sizei depth, int border,
-                         enum format, enum type, void *data);
-
-       is used to specify a three-dimensional texture image. target must be one
-       one of TEXTURE_3D for a three-dimensional texture or
-       TEXTURE_2D_ARRAY_EXT for an two-dimensional array texture.
-       Additionally, target may be either PROXY_TEXTURE_3D for a
-       three-dimensional proxy texture, or PROXY_TEXTURE_2D_ARRAY_EXT for a
-       two-dimensional proxy array texture."
-
-       Change the fourth paragraph on page 151 to say (spec changes identical
-       to EXT_texture_array):
-
-       "Textures with a base internal format of DEPTH_COMPONENT are supported
-       by texture image specification commands only if target is TEXTURE_1D,
-       TEXTURE_2D, TEXTURE_1D_ARRAY_EXT, TEXTURE_2D_ARRAY_EXT,
-       PROXY_TEXTURE_1D, PROXY_TEXTURE_2D, PROXY_TEXTURE_1D_ARRAY_EXT, or
-       PROXY_TEXTURE_2D_ARRAY_EXT. Using this format in conjunction with any
-       other target will result in an INVALID_OPERATION error."
-
-
-       Change the fourth paragraph on page 156 to say (spec changes identical
-       to EXT_texture_array):
-       
-       "The command
-
-         void TexImage2D(enum target, int level,
-                         int internalformat, sizei width, sizei height,
-                         int border, enum format, enum type, void *data);
-
-       is used to specify a two-dimensional texture image. target must be one
-       of TEXTURE_2D for a two-dimensional texture, TEXTURE_1D_ARRAY_EXT for a
-       one-dimensional array texture, or one of TEXTURE_CUBE_MAP_POSITIVE_X,
-       TEXTURE_CUBE_MAP_NEGATIVE_X, TEXTURE_CUBE_MAP_POSITIVE_Y,
-       TEXTURE_CUBE_MAP_NEGATIVE_Y, TEXTURE_CUBE_MAP_POSITIVE_Z, or
-       TEXTURE_CUBE_MAP_NEGATIVE_Z for a cube map texture. Additionally,
-       target may be either PROXY_TEXTURE_2D for a two-dimensional proxy
-       texture, PROXY_TEXTURE_1D_ARRAY_EXT for a one-dimensional proxy array
-       texture, or PROXY TEXTURE_CUBE_MAP for a cube map proxy texture in the
-       special case discussed in section 3.8.11.  The other parameters match
-       the corresponding parameters of TexImage3D.
-
-       For the purposes of decoding the texture image, TexImage2D is
-       equivalent to calling TexImage3D with corresponding arguments and depth
-       of 1, except that
-
-         * The border depth, d_b, is zero, and the depth of the image is
-           always 1 regardless of the value of border. 
-
-         * The border height, h_b, is zero if <target> is
-           TEXTURE_1D_ARRAY_EXT, and <border> otherwise.
-
-         * Convolution will be performed on the image (possibly changing its
-           width and height) if SEPARABLE 2D or CONVOLUTION 2D is enabled.
-
-         * UNPACK SKIP IMAGES is ignored."
-
-    -- Section 3.8.2 "Alternate Texture Image Specification Commands"
-
-       Change the second paragraph (page 159) (spec changes identical
-       to EXT_texture_array):
-
-       "The command
-
-         void CopyTexImage2D(enum target, int level,
-                             enum internalformat, int x, int y, sizei width,
-                             sizei height, int border);
-
-       defines a two-dimensional texture image in exactly the manner of
-       TexImage2D, except that the image data are taken from the framebuffer
-       rather than from client memory. Currently, target must be one of
-       TEXTURE_2D, TEXTURE_1D_ARRAY_EXT, TEXTURE_CUBE_MAP_POSITIVE_X,
-       TEXTURE_CUBE_MAP_NEGATIVE_X, TEXTURE_CUBE MAP_POSITIVE_Y,
-       TEXTURE_CUBE_MAP_NEGATIVE_Y, TEXTURE_CUBE_MAP_POSITIVE_Z, or
-       TEXTURE_CUBE_MAP_NEGATIVE_Z.
-
-
-       Change the last paragraph on page 160 to say (spec changes identical
-       to EXT_texture_array):
-
-       "Currently the target arguments of TexSubImage1D and CopyTexSubImage1D
-       must be TEXTURE_1D, the target arguments of TexSubImage2D and
-       CopyTexSubImage2D must be one of TEXTURE_2D, TEXTURE_1D_ARRAY_EXT,
-       TEXTURE_CUBE_MAP_POSITIVE_X, TEXTURE_CUBE_MAP_NEGATIVE_X,
-       TEXTURE_CUBE_MAP_POSITIVE_Y, TEXTURE_CUBE_MAP_NEGATIVE_Y,
-       TEXTURE_CUBE_MAP_POSITIVE_Z, or TEXTURE_CUBE_MAP_NEGATIVE_Z, and the
-       target arguments of TexSubImage3D and CopyTexSubImage3D must be
-       TEXTURE_3D or TEXTURE_2D_ARRAY_EXT. ..."
-
-
-    -- Section 3.8.4 "Texture Parameters"
-
-       Change the first paragraph (page 166) to say:
-
-       "Various parameters control how the texel array is treated when
-       specified or changed, and when applied to a fragment. Each parameter is
-       set by calling
-
-         void TexParameter{if}(enum target, enum pname, T param); 
-         void TexParameter{if}v(enum target, enum pname, T params);
-
-       target is the target, either TEXTURE_1D, TEXTURE_2D, TEXTURE_3D,
-       TEXTURE_CUBE_MAP, TEXTURE_1D_ARRAY_EXT, or TEXTURE_2D_ARRAY_EXT."
-
-
-    -- Section 3.8.8 "Texture Minification" in the section "Scale Factor and Level of Detail"
-
-       Change the first paragraph (page 172) to say:
-
-       "Let s(x,y) be the function that associates an s texture coordinate
-       with each set of window coordinates (x,y) that lie within a primitive;
-       define t(x,y) and r(x,y) analogously.  Let u(x,y) = w_t * s(x,y),
-       v(x,y) = h_t * t(x,y), and w(x,y) = d_t * r(x,y), where w_t, h_t,
-       and d_t are as defined by equations 3.15, 3.16, and 3.17 with
-       w_s, h_s, and d_s equal to the width, height, and depth of the
-       image array whose level is level_base.  For a one-dimensional
-       texture or a one-dimensional array texture, define v(x,y) = 0 and
-       w(x,y) = 0; for a two-dimensional texture or a two-dimensional array
-       texture, define w(x,y) = 0..."
-
-    -- Section 3.8.8 "Texture Minification" in the section "Mipmapping"
-
-       Change the third paragraph (page 174) to say:
-       
-       "For a two-dimensional texture, two-dimensional array texture, or
-       cube map texture,"
-
-       Change the fourth paragraph (page 174) to say:
-
-       "And for a one-dimensional texture or a one-dimensional array texture,"
-
-       After the first paragraph (page 175) add:
-
-       "For one-dimensional array textures, h_b and d_b are treated as 1,
-       regardless of the actual values, when performing mipmap calculations.
-       For two-dimensional array textures, d_b is always treated as one,
-       regardless of the actual value, when performing mipmap calculations."
-
-    -- Section 3.8.8 "Automatic Mipmap Generation" in the section "Mipmapping"
-
-       Change the third paragraph (page 176) to say (spec changes identical
-       to EXT_texture_array):
-
-       "The contents of the derived arrays are computed by repeated, filtered
-       reduction of the level_base array.  For one- and two-dimensional array
-       textures, each layer is filtered independently.  ..."
-
-    -- Section 3.8.8 "Manual Mipmap Generation" in the section "Mipmapping"
-
-       Change first paragraph to say (spec changes identical to
-       EXT_texture_array):
-
-       "Mipmaps can be generated manually with the command
-
-         void GenerateMipmapEXT(enum target);
-
-       where <target> is one of TEXTURE_1D, TEXTURE_2D, TEXTURE_CUBE_MAP,
-       TEXTURE_3D, TEXTURE_1D_ARRAY, or TEXTURE_2D_ARRAY.  Mipmap generation
-       affects the texture image attached to <target>.  ..."
-
-    -- Section 3.8.10 "Texture Completeness"
-
-       Change the second paragaph (page 177) to say (spec changes identical
-       to EXT_texture_array):
-
-       "For one-, two-, or three-dimensional textures and one- or
-       two-dimensional array textures, a texture is complete if the following
-       conditions all hold true:"
-
-    -- Section 3.8.11 "Texture State and Proxy State"
-
-       Change the second and third paragraphs (page 179) to say (spec changes
-       identical to EXT_texture_array):
-
-       "In addition to image arrays for one-, two-, and three-dimensional
-       textures, one- and two-dimensional array textures, and the six image
-       arrays for the cube map texture, partially instantiated image arrays
-       are maintained for one-, two-, and three-dimensional textures and one-
-       and two-dimensional array textures.  Additionally, a single proxy image
-       array is maintained for the cube map texture.  Each proxy image array
-       includes width, height, depth, border width, and internal format state
-       values, as well as state for the red, green, blue, alpha, luminance,
-       and intensity component resolutions. Proxy image arrays do not include
-       image data, nor do they include texture properties. When TexImage3D is
-       executed with target specified as PROXY_TEXTURE_3D, the
-       three-dimensional proxy state values of the specified level-of-detail
-       are recomputed and updated. If the image array would not be supported
-       by TexImage3D called with target set to TEXTURE 3D, no error is
-       generated, but the proxy width, height, depth, border width, and
-       component resolutions are set to zero. If the image array would be
-       supported by such a call to TexImage3D, the proxy state values are set
-       exactly as though the actual image array were being specified. No pixel
-       data are transferred or processed in either case.
-
-       Proxy arrays for one- and two-dimensional textures and one- and
-       two-dimensional array textures are operated on in the same way when
-       TexImage1D is executed with target specified as PROXY_TEXTURE_1D,
-       TexImage2D is executed with target specified as PROXY_TEXTURE_2D or
-       PROXY_TEXTURE_1D_ARRAY_EXT, or TexImage3D is executed with target
-       specified as PROXY_TETXURE_2D_ARRAY_EXT."
-
-    -- Section 3.8.12 "Texture Objects"
-
-       Change section (page 180) to say (spec changes identical to 
-       EXT_texture_array):
-
-       "In addition to the default textures TEXTURE_1D, TEXTURE_2D,
-       TEXTURE_3D, TEXTURE_CUBE_MAP, TEXTURE_1D_ARRAY_EXT, and TEXTURE_2D_EXT,
-       named one-, two-, and three-dimensional, cube map, and one- and
-       two-dimensional array texture objects can be created and operated upon.
-       The name space for texture objects is the unsigned integers, with zero
-       reserved by the GL.
-
-       A texture object is created by binding an unused name to TEXTURE_1D,
-       TEXTURE_2D, TEXTURE_3D, TEXTURE_CUBE_MAP, TEXTURE_1D_ARRAY_EXT, or
-       TEXTURE_2D_ARRAY_EXT. The binding is effected by calling
-
-         void BindTexture(enum target, uint texture);
-
-       with <target> set to the desired texture target and <texture> set to
-       the unused name.  The resulting texture object is a new state vector,
-       comprising all the state values listed in section 3.8.11, set to the
-       same initial values. If the new texture object is bound to TEXTURE_1D,
-       TEXTURE_2D, TEXTURE_3D, TEXTURE_CUBE_MAP, TEXTURE_1D_ARRAY_EXT, or
-       TEXTURE_2D_ARRAY_EXT, it is and remains a one-, two-,
-       three-dimensional, cube map, one- or two-dimensional array texture
-       respectively until it is deleted.
-
-       BindTexture may also be used to bind an existing texture object to
-       either TEXTURE_1D, TEXTURE_2D, TEXTURE_3D, TEXTURE_CUBE_MAP,
-       TEXTURE_1D_ARRAY_EXT, or TEXTURE_2D_ARRAY_EXT. The error
-       INVALID_OPERATION is generated if an attempt is made to bind a texture
-       object of different dimensionality than the specified target. If the
-       bind is successful no change is made to the state of the bound texture
-       object, and any previous binding to target is broken.
-
-       While a texture object is bound, GL operations on the target to which
-       it is bound affect the bound object, and queries of the target to which
-       it is bound return state from the bound object. If texture mapping of
-       the dimensionality of the target to which a texture object is bound is
-       enabled, the state of the bound texture object directs the texturing
-       operation.
-
-       In the initial state, TEXTURE_1D, TEXTURE_2D, TEXTURE_3D,
-       TEXTURE_CUBE_MAP, TEXTURE_1D_ARRAY_EXT, and TEXTURE_2D_ARRAY_EXT have
-       one-, two-, three-dimensional, cube map, and one- and two-dimensional
-       array texture state vectors respectively associated with them. In order
-       that access to these initial textures not be lost, they are treated as
-       texture objects all of whose names are 0. The initial one-, two-,
-       three-dimensional, cube map, one- and two-dimensional array textures
-       are therefore operated upon, queried, and applied as TEXTURE_1D,
-       TEXTURE_2D, TEXTURE_3D, TEXTURE_CUBE_MAP, TEXTURE_1D_ARRAY_EXT, and
-       TEXTURE_2D_ARRAY_EXT respectively while 0 is bound to the corresponding
-       targets.
-
-       Change second paragraph on page 181 to say (spec changes identical to 
-       EXT_texture_array):
-       
-       "...  If a texture that is currently bound to one of the targets
-       TEXTURE_1D, TEXTURE_2D, TEXTURE_3D, TEXTURE_CUBE_MAP,
-       TEXTURE_1D_ARRAY_EXT, or TEXTURE_2D_ARRAY_EXT is deleted, it is as
-       though BindTexture had been executed with the same target and texture
-       zero. ..."
-
-       Change second paragraph on page 182 to say (spec changes identical to 
-       EXT_texture_array):
-       
-       "The texture object name space, including the initial one-, two-, and
-       three dimensional, cube map, and one- and two-dimensional array texture
-       objects, is shared among all texture units. ..."
-
-
-    -- Section 3.8.14 "Depth Texture Comparison Modes" in "Texture Comparison Modes"
-
-       Change second through fourth paragraphs (page 188) to say:
-
-       "Let D_t be the depth texture value, in the range [0, 1].  For
-       texture lookups from one- and two-dimesional, rectangle, and
-       one-dimensional array targets, let R be the interpolated <r>
-       texture coordinate, clamped to the range [0, 1].  For texture lookups
-       from two-dimesional array texture targets, let R be the interpolated
-       <q> texture coordinate, clamped to the range [0, 1].  Then the
-       effective texture value L_t, I_t, or A_t is computed as follows:
-
-       If the value of TEXTURE_COMPARE_MODE is NONE, then
-
-          r = Dt
-
-       If the value of TEXTURE_COMPARE_MODE is
-       COMPARE_REF_DEPTH_TO_TEXTURE_EXT), then r depends on the texture
-       comparison function as shown in table 3.27."
-
-    -- Section 3.8.15 "Texture Application"
-
-       Change the first paragraph (page 189) to say:
-
-       "Texturing is enabled or disabled using the generic Enable and Disable
-       commands, respectively, with the symbolic constants TEXTURE_1D,
-       TEXTURE_2D, TEXTURE_3D, TEXTURE_CUBE_MAP, TEXTURE_1D_ARRAY_EXT, or
-       TEXTURE_2D_ARRAY_EXT to enable one-, two-, three-dimensional, cube
-       map, one-dimensional array, or two-dimensional array texture,
-       respectively.  If both two- and one-dimensional textures are enabled,
-       the two-dimensional texture is used.  If the three-dimensional and
-       either of the two- or one-dimensional textures is enabled, the
-       three-dimensional texture is used.  If the cube map texture and any of
-       the three-, two-, or one-dimensional textures is enabled, then cube map
-       texturing is used.  If one-dimensional array texture is enabled and any
-       of cube map, three-, two-, or one-dimensional textures is enabled, 
-       one-dimensional array texturing is used.  If two-dimensional array
-       texture is enabled and any of cube map, three-, two-, one-dimensional
-       textures or one-dimensional array texture is enabled, two-dimensional
-       array texturing is used..."
-
-    -- Section 3.11.2 of ARB_fragment_program (Fragment Program Grammar and Restrictions):
-
-       (mostly add to existing grammar rules)
-
-       <optionName>           ::= "MESA_texture_array"
-
-       <texTarget>            ::= "1D"
-                               | "2D"
-                               | "3D"
-                               | "CUBE"
-                               | "RECT"
-                               | <arrayTarget> (if program option is present)
-                               | <shadowTarget> (if program option is present)
-
-       <arrayTarget>          ::= "ARRAY1D"
-                               | "ARRAY2D"
-
-       <shadowTarget>         ::= "SHADOW1D"
-                               | "SHADOW2D"
-                               | "SHADOWRECT"
-                               | <shadowArrayTarget> (if program option is present)
-
-       <shadowArrayTarget>    ::= "SHADOWARRAY1D"
-                               | "SHADOWARRAY2D"
-
-
-    -- Add Section 3.11.4.5.4 "Texture Stack Option"
-
-       "If a fragment program specifies the "MESA_texture_array" program
-       option, the <texTarget> rule is modified to add the texture targets
-       ARRAY1D and ARRAY2D (See Section 3.11.2)."
-
-    -- Section 3.11.6 "Fragment Program Texture Instruction Set"
-
-       (replace 1st and 2nd paragraphs with the following paragraphs)
-
-       "The first three texture instructions described below specify the
-       mapping of 4-tuple input vectors to 4-tuple output vectors.
-       The sampling of the texture works as described in section 3.8,
-       except that texture environments and texture functions are not
-       applicable, and the texture enables hierarchy is replaced by explicit
-       references to the desired texture target (i.e., 1D, 2D, 3D, cube map,
-       rectangle, ARRAY1D, ARRAY2D).  These texture instructions specify
-       how the 4-tuple is mapped into the coordinates used for sampling.  The
-       following function is used to describe the texture sampling in the
-       descriptions below: 
-
-         vec4 TextureSample(vec4 coord, float lodBias, int texImageUnit,
-                            enum texTarget);
-
-       Note that not all four components of the texture coordinates <coord>
-       are used by all texture targets.  Component usage for each <texTarget>
-       is defined in table X.
-
-                                                        coordinates used
-         texTarget          Texture Type               s t r  layer  shadow
-         ----------------   ---------------------      -----  -----  ------
-         1D                 TEXTURE_1D                 x - -    -      -
-         2D                 TEXTURE_2D                 x y -    -      -
-         3D                 TEXTURE_3D                 x y z    -      -
-         CUBE               TEXTURE_CUBE_MAP           x y z    -      -
-         RECT               TEXTURE_RECTANGLE_ARB      x y -    -      -
-         ARRAY1D            TEXTURE_1D_ARRAY_EXT       x - -    y      -
-         ARRAY2D            TEXTURE_2D_ARRAY_EXT       x y -    z      -
-         SHADOW1D           TEXTURE_1D                 x - -    -      z
-         SHADOW2D           TEXTURE_2D                 x y -    -      z
-         SHADOWRECT         TEXTURE_RECTANGLE_ARB      x y -    -      z
-         SHADOWARRAY1D      TEXTURE_1D_ARRAY_EXT       x - -    y      z
-         SHADOWARRAY2D      TEXTURE_2D_ARRAY_EXT       x y -    z      w
-
-         Table X:  Texture types accessed for each of the <texTarget>, and
-         coordinate mappings.  The "coordinates used" column indicate the
-         input values used for each coordinate of the texture lookup, the
-         layer selector for array textures, and the reference value for
-         texture comparisons."
-
-    -- Section 3.11.6.2 "TXP: Project coordinate and map to color"
-    
-       Add to the end of the section:
-       
-       "A program will fail to load if the TXP instruction is used in
-       conjunction with the SHADOWARRAY2D target."
-
-Additions to Chapter 4 of the OpenGL 2.0 Specification (Per-Fragment Operations)
-
-    -- Section 4.4.2.3 "Attaching Texture Images to a Framebuffer"
-
-       Add to the end of the section (spec changes identical to
-       EXT_texture_array):
-
-       "The command
-
-         void FramebufferTextureLayerEXT(enum target, enum attachment,
-                                         uint texture, int level, int layer);
-
-       operates identically to FramebufferTexture3DEXT, except that it
-       attaches a single layer of a three-dimensional texture or a one- or
-       two-dimensional array texture.  <layer> is an integer indicating the
-       layer number, and is treated identically to the <zoffset> parameter in
-       FramebufferTexture3DEXT.  The error INVALID_VALUE is generated if
-       <layer> is negative.  The error INVALID_OPERATION is generated if
-       <texture> is non-zero and is not the name of a three dimensional
-       texture or one- or two-dimensional array texture.  Unlike
-       FramebufferTexture3D, no <textarget> parameter is accepted.
-
-       If <texture> is non-zero and the command does not result in an error,
-       the framebuffer attachment state corresponding to <attachment> is
-       updated as in the other FramebufferTexture commands, except that
-       FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER_EXT is set to <layer>."
-
-    -- Section 4.4.4.1 "Framebuffer Attachment Completeness"
-
-      Add to the end of the list of completeness rules (spec changes
-      identical to EXT_texture_array):
-
-        "* If FRAMEBUFFER_ATTACHMENT_OBJECT_TYPE_EXT is TEXTURE and
-           FRAMEBUFFER_ATTACHMENT_OBJECT_NAME_EXT names a one- or 
-           two-dimensional array texture, then
-           FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER_EXT must be smaller than the
-           number of layers in the texture."
-
-Additions to Chapter 5 of the OpenGL 2.0 Specification (Special Functions)
-
-    -- Section 5.4 "Display Lists"
-
-       Change the first paragraphi on page 242 to say (spec changes
-       identical to EXT_texture_array):
-
-       "TexImage3D, TexImage2D, TexImage1D, Histogram, and ColorTable are
-       executed immediately when called with the corresponding proxy arguments
-       PROXY_TEXTURE_3D or PROXY_TEXTURE_2D_ARRAY_EXT; PROXY_TEXTURE_2D,
-       PROXY_TEXTURE_CUBE_MAP, or PROXY_TEXTURE_1D_ARRAY_EXT;
-       PROXY_TEXTURE_1D; PROXY_HISTOGRAM; and PROXY_COLOR_TABLE,
-       PROXY_POST_CONVOLUTION_COLOR_TABLE, or
-       PROXY_POST_COLOR_MATRIX_COLOR_TABLE."
-
-Additions to Chapter 6 of the OpenGL 2.0 Specification (State and State Requests)
-
-    -- Section 6.1.3 "Enumerated Queries"
-
-       Add after the line beginning "If the value of
-       FRAMEBUFFER_ATTACHMENT_OBJECT_TYPE_EXT is TEXTURE" (spec changes
-       identical to EXT_texture_array):
-
-       "If <pname> is FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER_EXT and the
-       texture object named FRAMEBUFFER_ATTACHMENT_OBJECT_NAME_EXT is a
-       three-dimensional texture or a one- or two-dimensional array texture,
-       then <params> will contain the number of texture layer attached to the
-       attachment point.  Otherwise, <params> will contain the value zero."
-
-    -- Section 6.1.4 "Texture Queries"
-    
-       Change the first three paragraphs (page 248) to say (spec changes
-       identical to EXT_texture_array):
-
-       "The command
-
-         void GetTexImage(enum tex, int lod, enum format,
-                          enum type, void *img);
-
-       is used to obtain texture images. It is somewhat different from the
-       other get commands; tex is a symbolic value indicating which texture
-       (or texture face in the case of a cube map texture target name) is to
-       be obtained.  TEXTURE_1D, TEXTURE_2D, TEXTURE_3D, TEXTURE_1D_ARRAY_EXT,
-       and TEXTURE_2D_ARRAY_EXT indicate a one-, two-, or three-dimensional
-       texture, or one- or two-dimensional array texture, respectively.
-       TEXTURE_CUBE_MAP_POSITIVE_X, ...
-
-       GetTexImage obtains... from the first image to the last for
-       three-dimensional textures.  One- and two-dimensional array textures
-       are treated as two- and three-dimensional images, respectively, where
-       the layers are treated as rows or images.  These groups are then...
-
-       For three-dimensional and two-dimensional array textures, pixel storage
-       operations are applied as if the image were two-dimensional, except
-       that the additional pixel storage state values PACK_IMAGE_HEIGHT and
-       PACK_SKIP_IMAGES are applied. ..."
-
-Additions to Appendix A of the OpenGL 2.0 Specification (Invariance)
-
-    None
-
-Additions to the AGL/GLX/WGL Specifications
-
-    None
-
-GLX Protocol
-
-    None
-
-Dependencies on ARB_fragment_program
-
-    If ARB_fragment_program is not supported, the changes to section 3.11
-    should be ignored.
-
-Dependencies on EXT_framebuffer_object
-
-    If EXT_framebuffer_object is not supported, the changes to section
-    3.8.8 ("Manual Mipmap Generation"), 4.4.2.3, and 6.1.3 should be ignored.
-
-Dependencies on EXT_texture_compression_s3tc and NV_texture_compression_vtc
-
-    (Identical dependency as EXT_texture_array.)
-
-    S3TC texture compression is supported for two-dimensional array textures.
-    When <target> is TEXTURE_2D_ARRAY_EXT, each layer is stored independently
-    as a compressed two-dimensional textures.  When specifying or querying
-    compressed images using one of the S3TC formats, the images are provided
-    and/or returned as a series of two-dimensional textures stored
-    consecutively in memory, with the layer closest to zero specified first.
-    For array textures, images are not arranged in 4x4x4 or 4x4x2 blocks as in
-    the three-dimensional compression format provided in the
-    EXT_texture_compression_vtc extension.  Pixel store parameters, including
-    those specific to three-dimensional images, are ignored when compressed
-    image data are provided or returned, as in the
-    EXT_texture_compression_s3tc extension.
-
-    S3TC compression is not supported for one-dimensional texture targets in
-    EXT_texture_compression_s3tc, and is not supported for one-dimensional
-    array textures in this extension.  If compressed one-dimensional arrays
-    are needed, use a two-dimensional texture with a height of one.
-
-    This extension allows the use of the four S3TC internal format types in
-    TexImage3D, CompressedTexImage3D, and CompressedTexSubImage3D calls.
-
-Errors
-
-    None
-
-New State
-
-    (add to table 6.15, p. 276)
-
-                                                     Initial
-    Get Value                     Type   Get Command  Value Description           Sec.    Attribute
-    ----------------------------  -----  -----------  ----- --------------------  ------  ---------
-    TEXTURE_BINDING_1D_ARRAY_EXT  2*xZ+  GetIntegerv    0   texture object bound  3.8.12  texture
-                                                            to TEXTURE_1D_ARRAY
-    TEXTURE_BINDING_2D_ARRAY_EXT  2*xZ+  GetIntegerv    0   texture object bound  3.8.12  texture
-                                                            to TEXTURE_2D_ARRAY
-
-
-New Implementation Dependent State
-
-    (add to Table 6.32, p. 293)
-
-                                                    Minimum
-    Get Value                     Type  Get Command  Value  Description         Sec.  Attribute
-    ----------------------------  ----  ----------- ------- ------------------  ----- ---------
-    MAX_TEXTURE_ARRAY_LAYERS_EXT   Z+   GetIntegerv   64    maximum number of   3.8.1     -
-                                                            layers for texture
-                                                            arrays
-
-Issues
-
-    (1) Is "texture stack" a good name for this functionality?
-
-        NO.  The name is changed to "array texture" to match the
-        nomenclature used by GL_EXT_texture_array.
-
-    (2) Should the R texture coordinate be treated as normalized or
-    un-normalized?  If it were un-normalized, floor(R) could be thought
-    of as a direct index into the array texture.  This may be more
-    convenient for applications.
-
-        RESOLVED.  All texture coordinates are normalized.  The issue of
-        un-normalized texture coordinates has been discussed in the ARB
-        before and should be left for a layered extension.
-
-        RE-RESOLVED.  The R coordinate is un-normalized.  Accessing an array
-        using [0, layers-1] coordinates is much more natural.
-
-    (3) How does LOD selection work for stacked textures?
-
-        RESOLVED.  For 2D array textures the R coordinate is ignored, and
-        the LOD selection equations for 2D textures are used.  For 1D
-        array textures the T coordinate is ignored, and the LOD selection
-        equations for 1D textures are used.  The expected usage is in a
-        fragment program with an explicit LOD selection.
-
-    (4) What is the maximum size of a 2D array texture?  Is it the same
-    as for a 3D texture, or should a new query be added?  How about for 1D
-    array textures?
-
-        RESOLVED.  A new query is added.
-
-    (5) How are array textures exposed in GLSL?
-    
-        RESOLVED.  Use GL_EXT_texture_array.
-        
-    (6) Should a 1D array texture also be exposed?
-
-        RESOLVED.  For orthogonality, yes.
-
-    (7) How are stacked textures attached to framebuffer objects?
-
-        RESOLVED.  Layers of both one- and two-dimensional array textures
-        are attached using FreambufferTextureLayerEXT.  Once attached, the
-        array texture layer behaves exactly as either a one- or
-        two-dimensional texture.
-
-    (8) How is this extension related to GL_EXT_texture_array?
-    
-        This extension adapats GL_MESAX_texture_stack to the notation,
-        indexing, and FBO access of GL_EXT_texture_array.  This extension
-        replaces the GLSL support of GL_EXT_texture_array with
-        GL_ARB_fragment_program support.
-
-        Assembly program support is also provided by GL_NV_gpu_program4.
-        GL_NV_gpu_program4 also adds support for other features that are
-        specific to Nvidia hardware, while this extension adds only support
-        for array textures.
-
-        Much of text of this extension that has changed since
-        GL_MESAX_texture_stack comes directly from either
-        GL_EXT_texture_array or GL_NV_gpu_program4.
-
-Revision History
-
-    ||2005/11/15||0.1||idr||Initial draft MESAX version.||
-    ||2005/12/07||0.2||idr||Added framebuffer object interactions.||
-    ||2005/12/12||0.3||idr||Updated fragment program interactions.||
-    ||2007/05/16||0.4||idr||Converted to MESA_texture_array.  Brought in line with EXT_texture_array and NV_gpu_program4.||

docs/MESA_trace.spec

@@ -17,6 +17,7 @@ Status
 
 Version
 
+    $Id: MESA_trace.spec,v 1.4 2004/03/25 01:42:42 brianp Exp $
 
 Number
 

docs/MESA_window_pos.spec

@@ -16,6 +16,7 @@ Status
 
 Version
 
+    $Id: MESA_window_pos.spec,v 1.4 2004/03/25 01:42:42 brianp Exp $
 
 Number
 

docs/README.BEOS

@@ -134,3 +134,4 @@ as of February, 1999.
 
 
 ----------------------------------------------------------------------
+$Id: README.BEOS,v 1.12 2004/10/13 00:35:55 phoudoin Exp $

docs/README.QUAKE

@@ -205,3 +205,4 @@ http://www.linuxgames.com/quake2/
 
 
 ----------------------------------------------------------------------
+$Id: README.QUAKE,v 1.3 1998/08/23 15:26:26 brianp Exp $

docs/README.WIN32

@@ -1,163 +1,163 @@
-File: docs/README.WIN32
-
-Last updated: Apr 25, 2007 - Karl Schultz - kschultz@users.sourceforge.net
-
-Quick Start
------ -----
-
-Unzip the MesaLib, MesaGLUT, and MesaDemos ZIP files into the same
-directory.  The libs and demos build separately, so if you do not care
-about the demos or GLUT, you only need to unzip MesaLib.  If you unzip
-more than one ZIP file, they all need to be unzipped into the same
-directory.  Don't worry, you will not overwrite anything.
-
-The Windows build system uses Microsoft Visual Studio.  Project files
-for a specific version of Visual Studio are in their own directory in
-the top-level "windows" directory.  For example, Visual Studio 8 files
-are in windows/VC8.
-
-Support has been dropped for versions of Visual Studio prior to 8. The
-main reason is because Microsoft now provides a free compiler and
-developer environment.  Visual Studio Express can be found at
-
-http://msdn.microsoft.com/vstudio/express/visualc/default.aspx
-
-You'll also need the Platform SDK.  Instructions for obtaining and
-using the SDK with Visual Studio Express can be found at
-
-http://msdn.microsoft.com/vstudio/express/visualc/usingpsdk/
-
-If you are stuck using VC6 or VC7, you may start with these project
-files, but you may need to modify them to reflect changes in the
-Mesa source code tree.  If you sucessfully update the project files,
-please submit them to the author of this document so that they may
-be included in the next distribution. 
-
-The project files to build the core Mesa library, Windows Mesa
-drivers, OSMesa, and GLU are in the mesa directory.  The project files
-to build GLUT and some demo programs are in the progs directory.
-
-Makefiles are no longer shipped or supported, but can be generated
-from the projects using Visual Studio.
-
-
-Windows Drivers
-------- -------
-
-At this time, only the GDI driver is known to work.  Most of the demos
-in progs/demos should work with this driver.
-
-Source code also exists in the tree for other drivers in
-src/mesa/drivers/windows, but the status of this code is unknown.
-
-The GDI driver operates basically by writing pixel spans into a DIB
-section and then blitting the DIB to the window.  The driver was
-recently cleaned up and rewitten and so may have bugs or may be
-missing some functionality.  The older versions of the CVS source may
-be useful in figuring out any problems, or report them to me.
-
-To build Mesa with the GDI driver, build the mesa, gdi, and glu
-projects in the Visual Studio workspace found at
-
-	windows/VC8/mesa/mesa.sln
-
-The osmesa DLL can also be built with the osmesa project.
-
-The build system creates a lib top-level directory and copies
-resulting LIB and DLL files to this lib directory.  The files are:
-
-	OPENGL32.LIB, GLU32.LIB, OSMESA32.LIB
-	OPENGL32.DLL, GLU32.DLL, OSMESA32.DLL
-
-If the MesaDemos ZIP file was extracted, the DLL files are also copied
-to the demos directory.  This facilitates running the demos as described
-below.
-
-
-GLUT and Demos
----- --- -----
-
-A Visual Studio workspace can be found at 
-
-	windows/VC8/progs/progs.sln
-
-It can be used to build GLUT and a few demos.  The GLUT lib and DLL
-are copied to the top-level lib directory, along with the Mesa libs.
-
-The demo build system expects to find the LIB files in the top level
-lib directory, so you must build the Mesa libs first.  The demo
-executables are placed in the demos directory, because some of them
-rely on data files found there.  Also, the Mesa lib DLL's were copied
-there by the Mesa lib build process.  Therefore, you should be able to
-simply run the demo executables from the demo directory.
-
-If you want to run the demos from the Visual Studio, you may have to
-change the startup directory and explicitly state where the executables are.
-
-You may also build all the demo programs by using a makefile.  Go to
-the progs/demos directory and make sure you have executed VCVARS32.BAT
-or whatever setup script is appropriate for your compiler.  Then,
-
-	nmake -f Makefile.win
-
-should build all the demos.
-
-
-Build System Notes
------ ------ -----
-
-VC6 (not actively supported)
----
-
-Visual Studio 6 does not recognize files with the .cc extension as C++
-language files, without a lot of unnatural tweaking.  So, the VC6
-build process uses custom build steps to compile these files in the
-GLU library.
-
-Two additional configurations are provided, Debug x86 and Release x86
-that activate the shader code compilation by defining SLANG_86.  It is
-unknown if and how this works.
-
-VC7 (not actively supported)
----
-
-The above-mentioned .cc problem does not exist in this version.
-
-VC8
----
-
-No notes.
-
-
-General
--------
-
-After building, you can copy the above DLL files to a place in your
-PATH such as $SystemRoot/SYSTEM32.  If you don't like putting things
-in a system directory, place them in the same directory as the
-executable(s).  Be careful about accidentially overwriting files of
-the same name in the SYSTEM32 directory.
-
-The DLL files are built so that the external entry points use the
-stdcall calling convention.
-
-Static LIB files are not built.  The LIB files that are built with are
-the linker import files associated with the DLL files.
-
-The si-glu sources are used to build the GLU libs.  This was done
-mainly to get the better tessellator code.
-
-To build "mangled" Mesa, add the preprocessor define USE_MGL_NAMESPACE
-to the project settings.  You will also need to edit src/mesa.def to
-change all the gl* symbols to mgl*.  Because this is easy to do with a
-global replace operation in a text editor, no additional mangled
-version of mesa.def is maintained or shipped.
-
-If you have a Windows-related build problem or question, it is
-probably better to direct it to me (kschultz@users.sourceforge.net),
-rather than directly to the other Mesa developers.  I will help you as
-much as I can.  I also monitor the Mesa mailing lists and will answer
-questions in this area there as well.
-
-
-Karl Schultz
+File: docs/README.WIN32
+
+Last updated: Apr 25, 2007 - Karl Schultz - kschultz@users.sourceforge.net
+
+Quick Start
+----- -----
+
+Unzip the MesaLib, MesaGLUT, and MesaDemos ZIP files into the same
+directory.  The libs and demos build separately, so if you do not care
+about the demos or GLUT, you only need to unzip MesaLib.  If you unzip
+more than one ZIP file, they all need to be unzipped into the same
+directory.  Don't worry, you will not overwrite anything.
+
+The Windows build system uses Microsoft Visual Studio.  Project files
+for a specific version of Visual Studio are in their own directory in
+the top-level "windows" directory.  For example, Visual Studio 8 files
+are in windows/VC8.
+
+Support has been dropped for versions of Visual Studio prior to 8. The
+main reason is because Microsoft now provides a free compiler and
+developer environment.  Visual Studio Express can be found at
+
+http://msdn.microsoft.com/vstudio/express/visualc/default.aspx
+
+You'll also need the Platform SDK.  Instructions for obtaining and
+using the SDK with Visual Studio Express can be found at
+
+http://msdn.microsoft.com/vstudio/express/visualc/usingpsdk/
+
+If you are stuck using VC6 or VC7, you may start with these project
+files, but you may need to modify them to reflect changes in the
+Mesa source code tree.  If you sucessfully update the project files,
+please submit them to the author of this document so that they may
+be included in the next distribution. 
+
+The project files to build the core Mesa library, Windows Mesa
+drivers, OSMesa, and GLU are in the mesa directory.  The project files
+to build GLUT and some demo programs are in the progs directory.
+
+Makefiles are no longer shipped or supported, but can be generated
+from the projects using Visual Studio.
+
+
+Windows Drivers
+------- -------
+
+At this time, only the GDI driver is known to work.  Most of the demos
+in progs/demos should work with this driver.
+
+Source code also exists in the tree for other drivers in
+src/mesa/drivers/windows, but the status of this code is unknown.
+
+The GDI driver operates basically by writing pixel spans into a DIB
+section and then blitting the DIB to the window.  The driver was
+recently cleaned up and rewitten and so may have bugs or may be
+missing some functionality.  The older versions of the CVS source may
+be useful in figuring out any problems, or report them to me.
+
+To build Mesa with the GDI driver, build the mesa, gdi, and glu
+projects in the Visual Studio workspace found at
+
+	windows/VC8/mesa/mesa.sln
+
+The osmesa DLL can also be built with the osmesa project.
+
+The build system creates a lib top-level directory and copies
+resulting LIB and DLL files to this lib directory.  The files are:
+
+	OPENGL32.LIB, GLU32.LIB, OSMESA32.LIB
+	OPENGL32.DLL, GLU32.DLL, OSMESA32.DLL
+
+If the MesaDemos ZIP file was extracted, the DLL files are also copied
+to the demos directory.  This facilitates running the demos as described
+below.
+
+
+GLUT and Demos
+---- --- -----
+
+A Visual Studio workspace can be found at 
+
+	windows/VC8/progs/progs.sln
+
+It can be used to build GLUT and a few demos.  The GLUT lib and DLL
+are copied to the top-level lib directory, along with the Mesa libs.
+
+The demo build system expects to find the LIB files in the top level
+lib directory, so you must build the Mesa libs first.  The demo
+executables are placed in the demos directory, because some of them
+rely on data files found there.  Also, the Mesa lib DLL's were copied
+there by the Mesa lib build process.  Therefore, you should be able to
+simply run the demo executables from the demo directory.
+
+If you want to run the demos from the Visual Studio, you may have to
+change the startup directory and explicitly state where the executables are.
+
+You may also build all the demo programs by using a makefile.  Go to
+the progs/demos directory and make sure you have executed VCVARS32.BAT
+or whatever setup script is appropriate for your compiler.  Then,
+
+	nmake -f Makefile.win
+
+should build all the demos.
+
+
+Build System Notes
+----- ------ -----
+
+VC6 (not actively supported)
+---
+
+Visual Studio 6 does not recognize files with the .cc extension as C++
+language files, without a lot of unnatural tweaking.  So, the VC6
+build process uses custom build steps to compile these files in the
+GLU library.
+
+Two additional configurations are provided, Debug x86 and Release x86
+that activate the shader code compilation by defining SLANG_86.  It is
+unknown if and how this works.
+
+VC7 (not actively supported)
+---
+
+The above-mentioned .cc problem does not exist in this version.
+
+VC8
+---
+
+No notes.
+
+
+General
+-------
+
+After building, you can copy the above DLL files to a place in your
+PATH such as $SystemRoot/SYSTEM32.  If you don't like putting things
+in a system directory, place them in the same directory as the
+executable(s).  Be careful about accidentially overwriting files of
+the same name in the SYSTEM32 directory.
+
+The DLL files are built so that the external entry points use the
+stdcall calling convention.
+
+Static LIB files are not built.  The LIB files that are built with are
+the linker import files associated with the DLL files.
+
+The si-glu sources are used to build the GLU libs.  This was done
+mainly to get the better tessellator code.
+
+To build "mangled" Mesa, add the preprocessor define USE_MGL_NAMESPACE
+to the project settings.  You will also need to edit src/mesa.def to
+change all the gl* symbols to mgl*.  Because this is easy to do with a
+global replace operation in a text editor, no additional mangled
+version of mesa.def is maintained or shipped.
+
+If you have a Windows-related build problem or question, it is
+probably better to direct it to me (kschultz@users.sourceforge.net),
+rather than directly to the other Mesa developers.  I will help you as
+much as I can.  I also monitor the Mesa mailing lists and will answer
+questions in this area there as well.
+
+
+Karl Schultz

docs/RELNOTES-3.1

@@ -143,3 +143,4 @@ code).  Anyone want to help?
 
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-3.1,v 1.2 2000/04/07 17:08:06 brianp Exp $

docs/RELNOTES-3.2

@@ -9,3 +9,4 @@ have been added.  For a list of bug fixes please read the VERSIONS file.
 
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-3.2,v 1.2 2000/04/07 17:08:06 brianp Exp $

docs/RELNOTES-3.2.1

@@ -29,3 +29,4 @@ GLU library.
 
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-3.2.1,v 1.2 2000/07/21 16:32:33 brianp Exp $

docs/RELNOTES-3.3

@@ -268,3 +268,4 @@ image convolution.  This will (hopefully) be done for Mesa 3.5/3.6.
 
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-3.3,v 1.8 2000/07/21 16:26:41 brianp Exp $

docs/RELNOTES-3.4

@@ -19,3 +19,4 @@ see the VERSIONS file.
 
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-3.4,v 1.2 2002/03/23 02:37:17 brianp Exp $

docs/RELNOTES-3.4.1

@@ -19,3 +19,4 @@ the Mesa 3.4 release.  For details, see the VERSIONS file.
 
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-3.4.1,v 1.2 2001/05/23 14:45:01 brianp Exp $

docs/RELNOTES-3.4.2

@@ -19,3 +19,4 @@ the Mesa 3.4.1 release.  For details, see the VERSIONS file.
 
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-3.4.2,v 1.2 2001/05/23 14:45:01 brianp Exp $

docs/RELNOTES-3.5

@@ -225,3 +225,4 @@ In the future I hope to implement support for 32-bit, floating point
 color channels.
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-3.5,v 1.14 2001/06/20 19:02:48 brianp Exp $

docs/RELNOTES-4.0

@@ -160,3 +160,4 @@ See the VERSIONS file for more details about bug fixes, etc. in Mesa 4.0.
 
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-4.0,v 3.2 2001/10/17 14:59:21 brianp Exp $

docs/RELNOTES-4.0.1

@@ -19,3 +19,4 @@ Mesa 4.0.1 only contains bug fixes since version 4.0.
 See the docs/VERSIONS file for the list of bug fixes.
 
 ----------------------------------------------------------------------
+$Id: RELNOTES-4.0.1,v 1.2 2001/12/18 14:08:23 brianp Exp $