Fixes a number of transform feedback tests when run with Linux 4.8,
which allows us to use the MI_LOAD_REGISTER_REG command, at which point
we started using this new broken path.
ES3-CTS.functional.transform_feedback.array_element.interleaved.lines.*
and Piglit's arb_transform_feedback2/draw-auto are both fixed by this
patch, for example.
Thanks to Chris Wilson for catching this mistake!
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99030
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit 2138347a45)
The spec implicitly allows the incoming count to be 0. From the Vulkan
1.0.38 spec, Section 4.1 Physical Devices:
If the value referenced by pQueueFamilyPropertyCount is not 0 [then
do stuff].
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit d6545f2345)
As described in commit 690ead4a13 ("egl/wayland-egl: Fix for segfault
in dri2_wl_destroy_surface.") if we attempt to destroy a EGL surface
attached to already destroyed Wayland window we'll get a segfault.
v2: set the correct callback alongside the window->private. (Dan)
Cc: Daniel Stone <daniels@collabora.com>
Cc: "12.0 13.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
(cherry picked from commit bfd6314350)
intel_miptree_make_shareable() discarded and disabled CCS. Fix it so
that it discards and disables HiZ too.
Fixes dEQP-EGL.functional.image.render_multiple_contexts.gles2_renderbuffer_depth16_depth_buffer
on Skylake.
v2: Actually do what the commit message says. Discard the HiZ buffer.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=98329
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Cc: Nanley Chery <nanley.g.chery@intel.com
Cc: Haixia Shi <hshi@chromium.org>
(cherry picked from commit 42011be1e2)
[Emil Velikov: patch is a backport by Chad of above commit]
Typos do happen as people nominate patches for stable. This script aims
to catch most of those.
Due to the subtle nature of things, one has to pay special attention to
the output, similar to get-extra-pick-list.sh.
At the moment only the following is handled:
grep -i "CC:.*mesa-dev"
Cc: 12.0 13.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit f0bdd13fdb)
Ever since a long time ago when I messed around with fences, I ensure
that after a PUSH_SPACE call there is enough space to write a fence out
into the pushbuf.
However the PUSH_SPACE macro is not all-knowing, and so sometimes we
have to invoke nouveau_pushbuf_space manually with the relocs/pushes
args set. If we don't take the extra allocation from PUSH_SPACE into
account, then we will end up accidentally flushing when the code was not
expecting a flush. This can lead to various runtime and rendering
failures.
The amount of extra allocation isn't that important - it has to be at
least 8 based on the current nouveau_winsys.h setting, but even more
won't hurt. I just rounded up to powers of 2.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99354
Cc: "12.0 13.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
(cherry picked from commit eb60a89bc3)
vtn_ssa_value() can produce variable loads, and the cursor might
be after a return statement, causing nir_builder assert failures
about not inserting instructions after a jump.
This fixes:
dEQP-VK.spirv_assembly.instruction.graphics.barrier.in_if
dEQP-VK.spirv_assembly.instruction.graphics.barrier.in_switch
Cc: "13.0 12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 203c128781)
In OpenGL 3.0 and later it is legal to make a context current without
a default framebuffer.
This has been broken since DRI3 support was introduced.
Cc: "13.0 12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit b6670157d7)
If info->nr_samplers > ctx->nr_fragment_samplers_saved, the assignment
would prevent cso_single_sampler_done from unbinding the no longer used
samplers from the driver, which could result in use-after-free. This is
probably unlikely to happen in practice though.
Cc: "12.0 13.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
(cherry picked from commit 3d661a12be)
When Kristian reworked descriptor set allocation, somehow he forgot to
actually store the offset in the free list. Somehow, this completely
missed CTS testing until now... This fixes all 2744 of the new
'dEQP-VK.texture.filtering.* tests in the latest CTS.
Cc: "12.0 13.0" <mesa-dev@lists.freedesktop.org>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
(cherry picked from commit 37537b7d86)
On i965, we can't support coordinate offsets for texelFetch or rectangle
textures. Previously, we were doing this with a GLSL pass but we need to
do it in NIR if we want those workarounds for SPIR-V.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-dev@lists.freedesktop.org>
(cherry picked from commit d9156efc52)
While SPIR-V technically doesn't support "old style" shadow, the
shadow-compare gather instruction does return a vec4 so we need to be able
to set the old_style_shadow bit in NIR.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-dev@lists.freedesktop.org>
(cherry picked from commit 7c7acf53b2)
We shouldn't ever see a SEL with conditional mod other than GE (for max)
or L (for min), but we might see one with predication and no conditional
mod.
total instructions in shared programs: 8241806 -> 8241902 (0.00%)
instructions in affected programs: 13284 -> 13380 (0.72%)
HURT: 62
total cycles in shared programs: 84165104 -> 84166244 (0.00%)
cycles in affected programs: 75364 -> 76504 (1.51%)
helped: 10
HURT: 34
Fixes generated code in at least Sanctum 2, Borderlands 2, Goat
Simulator, XCOM: Enemy Unknown, and Shogun 2.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92234
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 7bed52bb5f)
Pretty basic, but it's a start.
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 091a8a04ad)
[Emil Velikov: s/gen_device_info/brw_device_info/, nir_shader_create()
has only three arguments]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Matches the vec4 backend, cmod propagation, and saturate propagation.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 6014da50ec)
[Emil Velikov: resolve trivial conflicts - don't rename instances which
do not exist]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/mesa/drivers/dri/i965/brw_fs.cpp
reported by kisak on irc,
it only applies to stable, not master
Fix separated/backported from commit 4140afd04b ("gallium/radeon: add
driver queries for compute/dma call stats and spills")
Cc: 11.1 11.2 12.0 <mesa-stable@lists.freedesktop.org>
This fixes random radeonsi GPU hangs in Batman Arkham: Origins (Wine) and
probably many other games too.
cso_cache deletes sampler states when the cache size is too big and doesn't
check which sampler states are bound, causing use-after-free in drivers.
Because of that, radeonsi uploaded garbage sampler states and the hardware
went bananas. Other drivers may have experienced similar issues.
Cc: 12.0 13.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
(cherry picked from commit 6dc96de303)
This fixes dual source blending on Stoney. The fix was copied from Vulkan.
The problem was discovered during internal testing.
Cc: 13.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
(cherry picked from commit 5e5573b1bf)
Framebuffer attachments can be specified through FramebufferTexture*
calls. Upon specifying a depth (or stencil) framebuffer attachment that
internally reuses a texture, the cube map face of the new attachment
would not be updated (defaulting to TEXTURE_CUBE_MAP_POSITIVE_X).
Fix this issue by actually updating the CubeMapFace field.
This bug manifested itself in BindFramebuffer calls performed on
framebuffers whose stencil attachments internally reused a depth
texture. When binding a framebuffer, we walk through the framebuffer's
attachments and update each one's corresponding gl_renderbuffer. Since
the framebuffer's depth and stencil attachments may share a
gl_renderbuffer and the walk visits the stencil attachment after
the depth attachment, the uninitialized CubeMapFace forced rendering
to TEXTURE_CUBE_MAP_POSITIVE_X.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77662
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 63318d34ac)
v2: use a function for calculating WORD1 of bo metadata
[Lyude]
On Fedora 24 and 25, I ended up noticing some rather nasty graphical
glitches on my desktop (using an R9 380 w/ amdgpu, Mesa version 12.0.4)
while I was in Wayland where the content of windows was garbled, as seen
here:
https://people.freedesktop.org/~lyudess/archive/11-30-2017/amdgpu-fix-example.png
After doing some reverse bisecting with Mesa v13, I ended up tracking
down the fix to this patch, which seems to fix the problem entirely on
all of the systems I've tested.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Tested-by: Lyude <lyude@redhat.com>
CC: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 095803a37a)
Sometimes it was f32, other times it was i32. Now it's always i32.
This fixes:
GL45-CTS.texture_cube_map_array.image_texture_size.texture_size_compute_sh
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
(cherry picked from commit 3e756f09d4)
Calculate depth ranges from viewport states and
pipe_rasterizer_state::clip_halfz.
The evergreend.h change is required to silence a warning.
This fixes this recently updated piglit: arb_depth_clamp/depth-clamp-range
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
(cherry picked from commit 687c4be9cf)
The GL_BGR and GL_UNSIGNED_SHORT_5_6_5_REV are not defined anywhere in
OpenGL ES 3.2 (or earlier) specification, and there are no known extensions
in the Khronos registry that would add these enums as valid responses for
glGetIntegerv(GL_IMPLEMENTATION_COLOR_READ_TYPE) and
glGetIntegerv(GL_IMPLEMENTATION_COLOR_READ_FORMAT) queries.
Note that this patch does not change the bit layout returned by the query. As
defined by the GL spec, the bit layout of GL_RGB + GL_UNSIGNED_SHORT_5_6_5 and
GL_BGR + GL_UNSIGNED_SHORT_5_6_5_REV are identical.
TEST=dEQP-GLES3.functional.state_query.integers.*
Signed-off-by: Haixia Shi <hshi@chromium.org>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Stéphane Marchesin <marcheu@chromium.org>
Change-Id: I81bbc8ccdc7e125edaeae443baf6fa8fdefcc6b6
(cherry picked from commit 8c56ff643b)
There is currently no protection against walking a hash (using
_mesa_HashWalk()) and modifying it at the same time, for instance by inserting
or deleting elements. This leads to segfaults in multithreaded code if e.g.
someone calls glTexImage2D (which may have to walk the list of FBOs) while
another thread is calling glDeleteFramebuffers on another thread with the two
contexts sharing lists.
The reason for this is that _mesa_HashWalk() doesn't actually take the mutex
that normally protects the hash; it takes an entirely different mutex.
Thus, walks are only protected against other walks, and there is also no
outer lock taking this. There is an old comment saying that this is to fix
problems with deadlock if the callback needs to take a mutex; we solve this
by changing the mutex to be recursive.
A demonstration Helgrind hit from a real application:
==13412== Possible data race during write of size 8 at 0x3498C6A8 by thread #1
==13412== Locks held: 2, at addresses 0x1AF09530 0x2B3DF400
==13412== at 0x1F040C99: _mesa_hash_table_remove (hash_table.c:395)
==13412== by 0x1EE98174: _mesa_HashRemove_unlocked (hash.c:350)
==13412== by 0x1EE98174: _mesa_HashRemove (hash.c:365)
==13412== by 0x1EE2372D: _mesa_DeleteFramebuffers (fbobject.c:2669)
==13412== by 0x6105AA4: movit::ResourcePool::cleanup_unlinked_fbos(void*) (resource_pool.cpp:473)
==13412== by 0x610615B: movit::ResourcePool::release_fbo(unsigned int) (resource_pool.cpp:442)
[...]
==13412== This conflicts with a previous read of size 8 by thread #20
==13412== Locks held: 2, at addresses 0x1AF09558 0x1AF73318
==13412== at 0x1F040CD9: _mesa_hash_table_next_entry (hash_table.c:415)
==13412== by 0x1EE982A8: _mesa_HashWalk (hash.c:426)
==13412== by 0x1EED6DFD: _mesa_update_fbo_texture.part.33 (teximage.c:2683)
==13412== by 0x1EED9410: _mesa_update_fbo_texture (teximage.c:3043)
==13412== by 0x1EED9410: teximage (teximage.c:3073)
==13412== by 0x1EEDA28F: _mesa_TexImage2D (teximage.c:3105)
==13412== by 0x166A68: operator() (mixer.cpp:454)
There are many more interactions than just these two possible.
Cc: 11.2 12.0 13.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Steinar H. Gunderson <steinar+mesa@gunderson.no>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
(cherry picked from commit 2e2562cabb)
This patch should have been the part of commit e592f7df.
In a situation when there are multiple render targets with alpha testing
enabled, if fragment shader doesn't write to draw buffer zero, it causes
the GPU hang on SKL. No GPU hang is seen on HSW. Simulator gives a
warning for all gen6+ h/w:
"Illegal render target write message length 0xa expected 0xc"
This patch fixes the GPU hang as well as the simulator warning with
new piglit test fbo-mrt-alphatest-no-buffer-zero-write:
https://patchwork.freedesktop.org/patch/118212
No regressions in Jenkins CI system.
Cc: "12.0 13.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
(cherry picked from commit b9df2251c1)
The address immediate field is only 9 bits and, since the value is in
bytes, the highest GRF we can point to with it is g15. This makes it
pretty close to useless for MOV_INDIRECT. There were already piles of
restrictions preventing us from using it prior to Broadwell, so let's get
rid of the gen8+ code path entirely.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97779
Cc: "12.0 13.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 2a4a86862c)
d3d97f8 broke llvm-3.7, which has a mismatched API for
setDataLayout/getDataLayout.
Signed-off-by: Tim Rowley <timothy.o.rowley@intel.com>
(cherry picked from commit ae4f2c849a)
We had missed a bit of errata - PS scratch needs to be computed as if
there were 4 subslices per slice, rather than 3.
This is a conservative backport of commit aaee3daa90.
It only increases the scratch amount, unlike the original commit which
decreases it on Skylake GT1-3 to avoid overallocating.
Cc: "12.0 11.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Add mesa_glinterop.h to the list of headers that will get included
in the distfile as it is required to build Mesa itself.
Corrects a regression introduced in a89faa2022.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 23392abf50)
This reverts commit d180de3532.
This is a radeon specific hack that causes problems on nouveau
when combined with the SHARED flag later. If radeonsi needs a fix
for this, please fix it in the driver.
[chk]
Using linear surfaces for this makes sense because tilling isn't
beneficial and the surfaces can potentially be shared with other GPUs
using the VDPAU OpenGL interop.
[airlied]
I think we need a flag that isn't SHARED/LINEAR that is more
SHARED_OTHER_GPU.
[mareko]
Does radeonsi need PIPE_BIND_VIDEO_DECODE_OUTPUT that it would translate
into linear ?
[mareko]
My only concern is decoding performance. If the decoder works in 64x1
blocks, tiling will hurt. That's the theory. I don't know how the
decoder works.
Cc: 12.0 13.0 <mesa-stable@lists.freedesktop.org>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Tested-by: Ilia Mirkin <imirkin@alum.mit.edu>
Tested-by: Nayan Deshmukh <nayan26deshmukh@gmail.com> (I+A)
(cherry picked from commit d0d5f7600c)
Previously, we were creating the shader with a NULL ralloc context and then
trusting in blorp_compile_fs to clean it up. The only problem was that
blorp_compile_fs didn't clean up its context properly so we were leaking.
When I went to fix that, I realized that it couldn't because it has to
return the shader binary which is allocated off of that context and used by
the caller. The solution is to make blorp_compile_fs take a ralloc
context, allocate the nir_shaders directly off that context, and clean it
all up in whatever function creates the shader and calls blorp_compile_fs.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Cc: "12.0, 13.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 43dadb6edd)
[Emil Velikov: attribute src/intel/blorp file movement]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/intel/blorp/blorp.c
src/intel/blorp/blorp_clear.c
src/intel/blorp/blorp_priv.h
src/mesa/drivers/dri/i965/brw_blorp_blit.cpp
Patches (and extension overall) depends on gallium API and driver work
which hasn't landed in branch.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Maybe this is why SDMA has been broken for many amdgpu users?
SDMA is the only block which is used with imported textures and relies
on this variable. DB also uses it, but it doesn't get imported textures,
so it's unaffected.
I do get SDMA failures on Tonga before this patch if R600_DEBUG=testdma
is changed to use imported textures.
Cc: 11.2 12.0 13.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
(cherry picked from commit 6ec3b2a4b1)
[Emil Velikov: resolve trivial conflicts - SI support does not exist in
branch]
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Conflicts:
src/gallium/winsys/amdgpu/drm/amdgpu_surface.c
Patch rearranges error checking so that enum checking provided via
destmask happens before other checks. It needs to be done in this
order because other error checks do not work properly if there were
invalid enums passed.
Patch also refines one existing check and it's documentation to match
GLES 3.0 spec (also in later specs). This was somewhat mysteriously
referring to desktop GL but had a check for gles3.
Fixes following dEQP tests:
dEQP-GLES31.functional.debug.negative_coverage.get_error.buffer.draw_buffers
no CI regressions observed.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98134
Cc: "12.0 13.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit a1652a059e)
While these max values were previously fixed for pbuffer creation, this
change makes also eglGetConfigAttrib() return correct values.
Fixes following dEQP tests:
dEQP-EGL.functional.create_surface.pbuffer.rgb888_no_depth_no_stencil
dEQP-EGL.functional.create_surface.pbuffer.rgb888_depth_stencil
dEQP-EGL.functional.create_surface.pbuffer.rgba8888_no_depth_no_stencil
dEQP-EGL.functional.create_surface.pbuffer.rgba8888_depth_stencil
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98326
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: "12.0 13.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit b91e1e38e8)
shared glapi was previously built without setting CFLAGS for
AM_CFLAGS and VISIBILITY_CFLAGS.
This resulted in symbols being exported that shouldn't be.
The x86 and sparc assembly versions of the dispatch table partially
mitigated this by using .hidden. Otherwise shared_dispatch_stub_*
were being exported.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Cc: "11.2 12.0 13.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
(cherry picked from commit 907ace5798)
The original patch by Joanna added the function pointer and callback yet
things got only partially applied - the infra was added, but the
implementation was missing.
Cc: "12.0 13.0" <mesa-stable@lists.freedesktop.org>
Fixes: 690ead4a13 ("egl/wayland-egl: Fix for segfault in
dri2_wl_destroy_surface.")
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 2e0ab61e29)
Earlier commit reworked the header install rules, to ensure that the
correct ones are installed only as needed.
By doing so it dropped a wildcard which was effectively including the
wglext.h header in the tarball.
Add the header to the top-level noinst_HEADERS, since the it is not
meant to be installed (autoconf is not used on Windows plaforms).
Fixes: a89faa2022 ("autoconf: Make header install distinct for various
APIs (v2)")
Cc: "12.0 13.0" <mesa-stable@lists.freedesktop.org>
Cc: Chuck Atkins <chuck.atkins@kitware.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 3511a86111)
A nomination unadorned with a specific version is now interpreted as
being aimed at the 12.0 branch, which was recently opened.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Even when enabled, primitive restart has no effect when the restart index
is larger than the representable values in the index buffer.
Fixes GL45-CTS.gtf31.GL3Tests.primitive_restart.primitive_restart_upconvert
for radeonsi VI.
v2: add an explanatory comment
Cc: "12.0 13.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com> (v1)
(cherry picked from commit bfa50f88ce)
Set the type of the left-hand side to the same as the right-hand side,
so that when the base type is double, the writemask of the MOV instruction
is properly fixed up.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: 13.0 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit ca592af880)
With ARB_gpu_shader5, texture offsets can be any source, including TEMPs
and IN's. Make sure to process them as regular sources so that we pick
up masks, etc.
This should fix some CTS tests that feed offsets directly to
textureGatherOffset, and we were not picking up the input use, thus not
advertising it in the shader header.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Dave Airlie <airlied@redhat.com>
Cc: 12.0 13.0 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit cd45d758ff)
The indirect handle has to come right after the coordinates, so if there
was a sample/bias/depth compare/offset, everything would end up being
shifted by one argument position.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit ecea2f69ef)
dEQP-GLES31.functional.geometry_shading.instanced.geometry_1_invocations
draws using a geometry shader that specifies
layout(points, invocations = 1) in;
and then uses gl_InvocationID. According to the Haswell PRM, the
"GS Instance ID 0" (and 1) thread payload fields are undefined in
dual object mode:
"If 'dispatch mode' is DUAL_OBJECT this field is not valid."
But there's no point in using them - if there's only one invocation,
the ID will be 0. So just load a constant.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit 9f677d6541)
When more than one atomic counter buffer is in use, UniformStorage[n].opaque
is set up to contain indices that are contiguous across all used buffers.
This appears to be used by i965 via NIR, but for TGSI we do not treat atomic
counter buffers as opaque, so using the data in the opaque array is incorrect.
Fixes GL45-CTS.compute_shader.resource-atomic-counter.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 1dd99a15a4)
Mesa's set of supported platform extensions depends on the autoconf
option --with-egl-platforms=foo,bar,baz. If --with-egl-platforms lacks
foo, then eglGetPlatformDisplay(EGL_PLATFORM_FOO, ...) unconditonally
fails.
So, if --with-egl-platforms lacks foo, then remove
EGL_VENDOR_platform_foo from the EGL client extension string.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit c177ef9d47)
[Emil Velikov: resolve trivial conflicts]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/egl/main/eglglobals.c
This reverts commit 8472045b16.
Conflicts:
include/GL/mesa_glinterop.h
This patch fixes this build error with GCC 4.4.
Compiling src/glx/dri_common_interop.c ...
In file included from src/glx/dri_common_interop.c:33:
include/GL/mesa_glinterop.h:62: error: redefinition of typedef ‘GLXContext’
include/GL/glx.h:165: note: previous declaration of ‘GLXContext’ was here
Fixes: 8472045b16 ("mesa_glinterop: remove inclusion of GLX header")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96770
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
(cherry picked from commit c10dcb2ce8)
Squashed with commit:
mesa_glinterop: allow building without X and related headers
This commit effectively reverts c10dcb2ce8
and fixes the typedef redefinition which inspired it.
In order to prevent requiring X packages at build time earlier commit
forward declared the required X/GLX typedefs. Since that approach
introduced typedef redefinition (a C11 feature) it was reverted.
To avoid the redefinition while _not_ mandating X and related headers
forward declare the structs and use those through the header.
As anyone uses the mesa interop header they ensure that the X (or others
in terms of EGL) headers are included, which ensures that everything is
resolved within the compilation unit.
Cc: Vinson Lee <vlee@freedesktop.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Cc: Tapani Pälli <tapani.palli@intel.com>
Cc: Chih-Wei Huang <cwhuang@android-x86.org>
Fixes: c10dcb2ce8 ("Revert "mesa_glinterop: remove inclusion of GLX
header"")
Fixes: 8472045b16 ("mesa_glinterop: remove inclusion of GLX header")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96770
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
(cherry picked from commit c85b34ffd0)
Commit cf804b4455
('glx: fix crash with bad fbconfig') introduced a check
in glXCreateNewContext() if the given config is a valid
fbconfig.
Unfortunately the check always checks the given config against
the fbconfigs of the DefaultScreen(dpy), instead of the
actual X-Screen specified in the config config->screen.
This leads to failure whenever a GL context is created
on a non-DefaultScreen(dpy), e.g., on X-Screen 1 of
a multi-x-screen setup, where the default screen is
typically 0.
Fix this by using config->screen instead of DefaultScreen(dpy).
Tested to fix context creation failure on a dual-x-screen setup.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 0c94ed0987)
Whether one or two slots are taken up by one API array depends on the
vertex shader, not on how the array is configured. When an array is
set up with fewer components than the shader expects, the high components
are undefined.
Fixes GL45-CTS.vertex_attrib_binding.basic-inputL-case1.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit d413fbb159)
This fixes a bug with offsets from uniforms which seems to have only been
noticed as a crash in piglit's
arb_gpu_shader5/compiler/builtin-functions/fs-gatherOffset-uniform-offset.frag
on radeonsi.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit b234e37765)
Recent fix for non-const offsets broke the case of a single offset (vs 4
offsets). The later code relies on the offs array to contain null values
to tell whether they should be added onto the srcs list.
Fixes: 5239bd592 ("nvc0/ir: fix overwriting of value backing non-constant gather offset")
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit a48a343c29)
This optimization is incorrect with 64-bit operations, because the
channel-splitting logic in emit_asm ends up being applied twice to
the source operands.
A lucky coincidence of how the writemask test works resulted in this
optimization basically never being applied anyway. As far as I can tell,
the only case where it would (incorrectly) have been applied is something
like
dvec2 d;
float x = (float)d.y;
which nobody seems to have ever done. But the moral equivalent does occur
in one of the component layout piglit test.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 63193b9cde)
Normally the value is an immediate, which is moved to some temporary, so
there's no problem. In the case of a non-constant offset (as allowed by
ARB_gpu_shader5), we have to take care to copy it first before using it
to build up the bits.
This fixes a compilation error observed in F1 2015.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 5239bd5920)
This fixes a problem where GL headers would only get installed if
glx was enabled. So if osmesa was enabled but not glx, then the
GL headers required by osmesa would be missing from the install.
v2: Dropped unneeded mesa_glinterop.h redundant osmesa.h install
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Chuck Atkins <chuck.atkins@kitware.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit a89faa2022)
We locked an unitialized mutex in the callstack
glClientWaitSync
intel_gl_client_wait_sync
brw_fence_client_wait_sync
because we forgot to initialize it in intel_gl_fence_sync.
(The EGLSync codepath didn't have this bug. It initialized the mutex in
intel_dri_create_sync).
We also forgot to tear down (mtx_destroy) the mutex when destroying
the sync object.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit ce1d67c2e5)
Some of the existing code is needlessly complicated. The basic principle
should be: control-flow opcodes emit branches to properly terminate the
current block, _unless_ the current block already has a terminator (which
happens if and only if there was a BRK or CONT).
This also fixes a bug where multiple terminators were created in a block.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97887
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 6f87d7a146)
[Emil Velikov: resolve trivial conflicts]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/gallium/drivers/radeon/radeon_setup_tgsi_llvm.c
Previously, we were saving off the last nir_block in a vtn_block before
moving on so that we could find the nir_block again when it came time to
handle phi sources. Unfortunately, NIR's control flow modification code is
inconsistent when it comes to how it splits blocks so the block pointer we
saved off may point to a block somewhere else in the shader by the time we
get around to handling phi sources. In order to get around this, we insert
a nop instruction and use that as the logical end of our block. Since the
control flow manipulation code respects instructions, the nop will keeps
its place like any other instruction and we can easily find the end of our
block when we need it.
This fixes a bug triggered by a couple of vkQuake shaders.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97233
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Tested-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 6ffbfc760d)
This intrinsic has no destination, no sources, no variables, and can be
eliminated. In other words, it does nothing and will always get deleted by
dead code elimination. However, it does provide a quick-and-easy way to
temporarily tag a particular location in a NIR shader.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 7697b4b98b)
[Emil Velikov: resolve trivial conflicts]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/compiler/nir/nir_intrinsics.h
This fixes a crash in egl-create-msaa-pbuffer-surface Piglit test
and same crash in many dEQP EGL tests.
I also found that some Qt example did a workaround because of this
crash: https://bugreports.qt.io/browse/QTBUG-47509
v2: Ian pointed out that v1 removed support for all multisample
configs, including window ones. This one removes pbuffer bit
when adding configs, now only pbuffer+msaa gets rejected and
window+msaa continues to work. Fixed also comment (Emil)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 4d6d55deef)
While the current CFG code is valid in the case where a switch break also
happens to be a loop continue, it's a bit suboptimal. Since hardware is
capable of handling the continue as a direct jump, it's better to use a
continue instruction when we can than to bother with all of the nasty
switch break lowering.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit ef3c5ac7fb)
It is possible that the break block of a switch is actually the continue of
the loop containing the switch. In this case, we need to identify the
break block as a continue and break out of current level of CFG handling.
If we don't, the continue portion of the loop will get handled twice, once
by following after the break and a second time by the loop handling code
handling it explicitly.
This fixes 6 of the new Vulkan CTS tests:
- dEQP-VK.spirv_assembly.instruction.graphics.opphi.out_of_order*
- dEQP-VK.spirv_assembly.instruction.graphics.selection_block_order.out_of_order*
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 4d02faede5)
This will hopefully fix wget from x.org (no real reason explained in
Travis CI bug reports), and may also mean that we can enable LLVM driver
builds.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Rhys Kidd <rhyskidd@gmail.com>
(cherry picked from commit 80a872f3f0)
Travis has been broken a couple of times by configure.ac updates. To make
it useful, auto-update the version necessary.
This could potentially be used for other dependencies, too, but those get
bumped less frequently.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Rhys Kidd <rhyskidd@gmail.com>
(cherry picked from commit ecbc76cf6e)
Needed to successfully link llvmpipe or swr when using shared llvm libs
built with inteljitevents enabled.
v2: Make adding inteljitevents component global rather than just
llvmpipe/swr, since libgallium will have a symbol dependency.
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit bacdd9ef4c)
Change dri2_query_image to check the return value of resource_get_handle
and return GL_FALSE if an error occurs.
For reference this is an example callstack that should propagate the
error back to the user:
i915_drm_buffer_get_handle
i915_texture_get_handle
u_resource_get_handle_vtbl
dri2_query_image
gbm_dri_bo_get_fd
gbm_bo_get_fd
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Nicholas Bishop <nbishop@neverware.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> (v1)
[Emil Velikov: Split from larger patch, polish coding style, cc stable]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit aa560e8e63)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/gallium/state_trackers/dri/dri2.c
Change gbm_dri_bo_get_fd to check the return value of queryImage and
return -1 (an invalid file descriptor) if an error occurs.
Update the comment for gbm_bo_get_fd to return -1, since (apart from the
above) we've already return -1 on error.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Nicholas Bishop <nbishop@neverware.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> (v1)
[Emil Velikov: Split from larger patch, polish coding style, cc stable]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 2d05ba2ca0)
Some demos, like Heaven, were creating and destroying a large number
of sampler views because of a swizzle issue.
Basically, we compute the sampler view's swizzle by examining the
texture format, user swizzle, depth mode, etc. Later, during validation
we recompute that swizzle (in case something like depth mode changes)
and see if it matches the view's swizzle.
In the case of PIPE_FORMAT_RGTC2_UNORM, get_texture_format_swizzle
returned SWIZZLE_XYZW but the u_sampler_view_default_template() function
was setting the sampler view's swizzle to SWIZZLE_XY01. This mismatch
caused the validation step to always "fail" so we'd destroy the old
sampler view and create a new one.
By removing the conditional, the sampler view's swizzle and the computed
texture swizzle match and validation "passes". When creating a new sampler
view, we always want to use the texture swizzle which we just computed.
Fixes VMware issue 1733389.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
(cherry picked from commit 1cdc232e1a)
Make pipe_loader_sw_probe_kms take ownership of the passed in fd,
like pipe_loader_drm_probe_fd does.
The only caller is dri_kms_init_screen which passes in a dupped fd,
just like dri2_init_screen passes in a dupped fd to
pipe_loader_drm_probe_fd.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 459cc94507)
Squashed with commit:
pipe_loader_sw: Don't invoke Unix close() on Windows.
Trivial.
(cherry picked from commit c6d17701c8)
This is supposed to be exposed with the GL_KHR_robustness extension,
which we support on ES 2.0 and later. On desktop GL, it's also exposed
by GL_ARB_robustness, which is supported by all drivers ("dummy_true").
so we also allow desktop GL.
Fixes:
- ES32-CTS.robust.robustness.noResetNotification
- ES32-CTS.robust.robustness.loseContextOnReset
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
(cherry picked from commit 3bcdc2e3db)
[Emil Velikov: resolve trivial conflicts]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/mesa/main/get.c
src/mesa/main/get_hash_params.py
Similar to commit 49c24d8a24 ("i965: fix noop_scissor range issue on
width/height") - take the X/Y into account to determine whether the
scissor covers the whole area or not.
Fixes the recently-added gl-1.0-scissor-depth-clear-negative-xy piglit
test.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 742832434a)
This fixes a crash when using the prefered video format with vaapisink
on Nvidia hardwares.
Also caught by the following assert:
nouveau_vp3_video.c:91: Assertion `templat->interlaced' failed.
TEST= gst-launch-1.0 videotestsrc ! video/x-raw, format=NV12 ! vaapisink
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Julien Isorce <j.isorce@samsung.com>
Tested-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Tested-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
(cherry picked from commit bf901a2f8c)
We have to force it to write to predicate 7 (aka PT) in order for it not
to mess up another predicate. Unclear what would be returned in the
predicate, perhaps an error code for out-of-bounds requests. Blob
doesn't seem to check it.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit a22aee5ad1)
On the RSxxx chip series, HW TCL is missing and r300_emit_vs_state()
is never called.
However, if R300_VAP_CNTL is never set, the hardware (at least the
RS690 I tested this on) comes up with rendering artifacts, and
parts that are uploaded before this "fix" remain broken in VRAM.
This causes artifacts as in fdo#69076 ("triangle flickering").
It seems like this setup needs to happen at least once after power on
for 3D rendering to work properly. In the DDX with EXA, this happens in
RADEON_SWITCH_TO_3D() when processing an XRENDER Composite or an
Xv request. So playing back a video or starting a GTK+2 application
fixes 3D rendering for the rest of the session. However, this auto-fix
doesn't happen when EXA is not used, such as with GLAMOR or Wayland.
This patch ensures the register is configured even in absence of
the DDX's EXA module.
The register setting is taken from:
xf86-video-ati -- RADEONInit3DEngineInternal()
mesa/src/mesa/drivers/dri/r300 -- r300EmitClearState()
Tested on RS690.
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Max Staudt <mstaudt@suse.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 02675622b0)
Previously, we dind't apply variable decorations to the members of a split
structure variable. This doesn't quite work, unfortunately, because things
such as the "flat" qualifier may get applied to an entire structure instead
of propagated to the members. This fixes 9 of the new CTS tests in the
dEQP-VK.glsl.linkage.varying.struct.* group.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit a00bd7bc27)
First off, as late as ES 3.2, GetInternalformat only supports
RENDERBUFFER and 2DMS(_ARRAY) targets.
Secondly, the _mesa_has_ext helpers are very accurate... a little too
accurate, some might say. If we only show an extension in compat
profiles because core profiles have the functionality guaranteed, they
will return false. Fix these to either check for a core profile
explicitly, or to a different-but-identical extension available in core
profile.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Matteo Bruni <matteo.mystral@gmail.com>
Tested-by: Matteo Bruni <matteo.mystral@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit c42acd93d4)
Add a separate extension check for that format. Prevents glTexImage from
trying to find a matching format, which fails on drivers without support
for this format.
Fixes: sized-texture-format-channels (on a3xx)
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 36347c8d6f)
SPIR-V has the two arguments in the opposite order from GLSL. NIR uses the
GLSL order so we had them backwards.
Fixes dEQP-VK.spirv_assembly.instruction.compute.opatomic.compex
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 0ead7bef6b)
Unfortunately a3xx does not have a separate disable for depth clipping,
so when depth clamp is enabled, we disable the whole 3d clipper logic.
This in turn also gets rid of the xy clip that it would normally do.
When we detect this would happen, instead we integrate the viewport into
the window scissor. This may have slightly different behavior around
wide points, but it's unlikely that anything depends on this.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97231
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit ca313e00b6)
[Emil Velikov: s|batch->||g]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/gallium/drivers/freedreno/a3xx/fd3_emit.c
The hw clipper only handles up to 6 UCPs. If there are more than 6 UCPs,
or a clip vertex, or clip distances are in use, then we must use the
fallback discard-based clipping from the frag shader.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 83d7230fd5)
The code a few lines below expects to migrate the bo in question to
VRAM. Since we're filling the initial data via CPU, it's more efficient
to create the temporary buffer in GART. There is no "push" method
implemented, otherwise we'd use that instead.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 6118bcab4e)
Always use 3 buffers when flipping. With only 2 buffers, we have to wait
for a flip to complete (which takes non-0 time even with asynchronous
flips) before we can start working on the next frame. We were previously
only using 2 buffers for flipping if the X server supports asynchronous
flips, even when we're not using asynchronous flips. This could result
in bad performance (the referenced bug report is an extreme case, where
the inter-frame stalls were preventing the GPU from reaching its maximum
clocks).
I couldn't measure any performance boost using 4 buffers with flipping.
Performance actually seemed to go down slightly, but that might have
been just noise.
Without flipping, a single back buffer is enough for swap interval 0,
but we need to use 2 back buffers when the swap interval is non-0,
otherwise we have to wait for the swap interval to pass before we can
start working on the next frame. This condition was previously reversed.
Cc: "12.0 11.2" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97260
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 1e3218bc5b)
Squashed with commit:
loader/dri3: Always use at least two back buffers
This can make a significant difference for performance with some extreme
test cases such as vblank_mode=0 glxgears.
Fixes: 1e3218bc5b ("loader/dri3: Overhaul dri3_update_num_back")
Cc: "12.0 11.2" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97549
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
(cherry picked from commit dc3bb5db8c)
Currently, due to the inverse order, strcmp will produce negative result
when the needle is towards the start of the haystack. Thus on the next
iteration(s) we'll end up further towards the end and eventually fail to
locate the entry.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
(cherry picked from commit 62b224d428)
We recently starting to always emit the NDV (== dall) bit for quadops.
However it was folded into the wrong code word.
Fixes: e0a067ed48 (nv50/ir: always emit the NDV bit for OP_QUADOP)
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 61e978524a)
We were previously ... not clamping. I guess this meant that everything
got clamped to 1/0, which was enough to pass the existing tests. Or
perhaps the clamping would only happen to the rasterized depth value and
not the frag shader's output depth value.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97231
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry-picked from 89f00f749f)
[imirkin: adjust ctx->batch to just ctx]
The original pipeline cache the Kristian wrote was based on a now-false
premise that the shaders can be stored in the pipeline cache. The Vulkan
1.0 spec explicitly states that the pipeline cache object is transiant and
you are allowed to delete it after using it to create a pipeline with no
ill effects. As nice as Kristian's design was, it doesn't jive with the
expectation provided by the Vulkan spec.
The new pipeline cache uses reference-counted anv_shader_bin objects that
are backed by a large state pool. The cache itself is just a hash table
mapping keys hashes to anv_shader_bin objects. This has the added
advantage of removing one more hand-rolled hash table from mesa.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97476
Acked-by: Kristian Høgsberg Kristensen <krh@bitplanet.net>
(cherry picked from commit 10f9901bce)
This new anv_shader_bin struct stores the compiled kernel (as an anv_state)
as well as all of the metadata that is generated at shader compile time.
The struct is very similar to the old cache_entry struct except that it
is reference counted and stores the actual pipeline_bind_map. Similarly to
cache_entry, much of the actual data is floating-size and stored after the
main struct. Unlike cache_entry, which was storred in GPU-accessable
memory, the storage for anv_shader_bin kernels comes from a state pool.
The struct itself is reference-counted so that it can be used by multiple
pipelines at a time without fear of allocation issues.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Acked-by: Kristian Høgsberg Kristensen <krh@bitplanet.net>
(cherry picked from commit 6899718470)
All of these worked before because they were depending on prog_data to be
null. Soon, we won't be able to depend on a nice prog_data pointer and
it's nice to be more explicit anyway.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 13c09fdd0c)
The range from ANV_MIN_STATE_SIZE_LOG2 to ANV_MAX_STATE_SIZE_LOG2 should
be inclusive and we have asserts that ensure that you never try to allocate
a state larger than (1 << ANV_MAX_STATE_SIZE_LOG2). However, without
adding 1 to the difference, we allocate 1 too few bucckts and so, even
though we have an assert, anything landing in the last bucket will fail to
allocate properly..
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit a0f5c496e3)
This silences a divergent error found with F1 2015.
Basically, the NDV bit has to be set when a FSWZ instruction is
inside divergent code, but it's not needed otherwise. The correct
fix should be to set it only in divergent code situations.
GM107 emitter already sets that bit.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: <mesa-stable@lists.freedesktop.org>
(cherry picked from commit e0a067ed48)
Experimentally, this is required for glxgears and others to display the
proper colors. This is also what the code used to do before the
referenced commit.
Fixes: c703658b39 (mesa: Drop _EnabledUnits.)
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 357d8261f1)
We need to set the need_convert flag with each loop iteration, not
just when the rgba pointer is null.
Bug reported by Markus Müller <mueller@imfusion.de> on mesa-users list.
Fixes new piglit arb_texture_float-get-tex3d test.
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit b9b88516f8)
Respect intel_miptree_slice::x_offset,y_offset and
intel_mipmap_tree::offset. All three may be non-zero when glReadPixels
is called on an EGLImage created from the non-base slice of a miptree.
Patch 2/2 that fixes test
'dEQP-EGL.functional.image.create.gles2_cubemap_*'.
Reported-by: Haixia Shi <hshi@chromium.org>
Diagnosed-by: Haixia Shi <hshi@chromium.org>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Change-Id: I4b397b27e55a743a7094d29fb0a6a4b6b34352b0
(cherry picked from commit 5b03975889)
When glEGLImageTargetRenderbufferStorageOES() was given an EGLImage
created from the non-base slice of a miptree,
intel_image_target_renderbuffer_storage() forgot to apply the intra-tile
offsets __DRIimage::tile_x,tile_y to the miptree layout.
This patch fixes the problem with a quick hack suitable for
cherry-picking. A proper fix requires more thorough plumbing in
intel_miptree_create_layout() and brw_tex_layout().
Patch 1/2 that fixes test
'dEQP-EGL.functional.image.create.gles2_cubemap_*'.
Reported-by: Haixia Shi <hshi@chromium.org>
Diagnosed-by: Haixia Shi <hshi@chromium.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: mesa-stable@lists.freedesktop.org
Change-Id: I8a64b0048a1ee9e714ebb3f33fffd8334036450b
(cherry picked from commit c82f99e883)
Prior to this commit rename_variables_block() is recursively called,
performing a depth-first traversal of the control flow graph. The
function uses a non-trivial amount of stack space for local variables,
which puts us in danger of smashing the stack, given a sufficiently deep
dominance tree.
XCOM: Enemy Within contains a shader with such a dominance tree (1574
nir_blocks in total, depth of at least 143).
Jason tells me that he believes that any walk over the nir_blocks that
respects dominance is sufficient (a DFS might have been necessary prior
to the introduction of nir_phi_builder).
In fact, the introduction of nir_phi_builder made the problem worse:
rename_variables_block(), walks to the bottom of the dominance tree
before calling nir_phi_builder_value_get_block_def() which walks back to
the top of the dominance tree...
In any case, this patch ensures we avoid that problem as well.
Cc: mesa-stable@lists.freedesktop.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97225
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
(cherry picked from commit e53130cc27)
Some front buffer rendering was in the wrong position. This included
scissored clears, glDrawPixels and glCopyPixels. The problem was the
y coordinate passed to putImage() didn't match the y coordinate passed
to getImage().
We fix this by setting xrb->map_y to the inverted coordinate in
swrast_map_renderbuffer() which is used later by the putImage() call.
Also pass xrb->map_y to getImage() to be symmetric.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97426
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 2a2dc416b6)
The pipeline layout affects shader compilation because it is what
determines binding table locations as well as whether or not a particular
buffer has dynamic offsets. Since this affects the generated shader, it
needs to be in the hash. This fixes a bunch of CTS tests now that the CTS
is using a pipeline cache.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 2301705dee)
Like Fermi, textures and samplers are aliased between 3D and compute,
especially the TIC_FLUSH/TSC_FLUSH methods and we have to re-validate
these resources when switching between the two pipelines.
This fixes a GPU hang with Elemental (and most likely with other UE4 demos).
Tested on GK107 and GM107.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
CC: <mesa-stable@lists.freedesktop.org>
(cherry picked from commit a227b0a4f1)
So that callers outside of si_descriptors.c need to worry less about the
details of descriptor handling.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit ba4a2840c7)
drmPrimeHandleToFD() will return the same GEM handle every time the same
buffer is imported, even from a different prime FD. Since GEM handles
are not reference counted, we need to make sure that each GEM handle is
referenced only by one display target struct, by looking it up in
kms_sw->bo_list first and bumping the refcount of the found dt on hit
and falling back to creating a new dt only on miss.
v2: Split into separate function.
Use helper function for lookup.
v3 [Emil Velikov]:
Rename kms_sw_displaytarget_{lookup,find_and_ref} (Jordan)
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com> (v2)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 577f85e2bb)
As a preparation to use the lookup in more than once place, move the
code that looks up given KMS/GEM handle to a separate function. This
change should not introduce any functional changes.
v2: Split into separate patch.
Move lookup code into separate function.
v3 [Emil Velikov]:
Rename kms_sw_displaytarget_{lookup,find_and_ref} (Jordan)
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com> (v2)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 0465c72d46)
Currently kms_sw_displaytarget_add_from_prime() allocates the struct and
fills in only some of the fields, resulting in a half-baked struct that
needs to be further completed by the caller. To make this a bit more
consistent, pass width, height and stride to this function and fill in
everything there, so that caller can take the returned struct as is.
v2: Split from one big patch into four fixing one thing at a time.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit e71b78ebf9)
Currently the code creates a display target struct with refcount field
initialized to 1 and then the caller again increments it, leading to
a leaked reference. Let's remove the unnecessary increment.
v2: Split from one big patch into four fixing one thing at a time.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 0aa6a818ef)
It is necessary to reuse existing BOs when dmabufs are imported. There
are 2 cases that need to be handled. dmabufs can be created/exported and
imported by the same process and can be imported multiple times.
Copying other drivers, add a hash table to track exported BOs so the
BOs get reused.
v2: Whitespace fixup (by anholt)
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 9ace2c1355)
We don't tell the hardware whether we're computing depth, so we need
to manage early Z state manually. Fixes piglit early-z.
(cherry picked from commit ce8504d196)
We're passed in a freshly dup()ed fd on screen create, so we should close
it on exit. Debugged by Hugh Cole-Baker.
(cherry picked from commit c65a00eaff)
The expected stride calculation is completely wrong. It should
ultimately be multiplying cpp and width rather than dividing. The width
also needs to be aligned to the tiling width first before converting to
stride bytes.
The whole stride check here is possibly pointless. Any buffers which
were allocated outside of vc4 may have strides with larger alignment
requirements.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 067c5b10b6)
We can't actually clear these images normally because we can't render to
them. Instead, we have to manually unpack the rgb9e5 color value on the
CPU and clear it as R32_UINT. We still have a bit of work to do to clear
non-power-of-two images, but this should get all of the power-of-two clears
working on at least Haswell. This fixes three of the new Vulkan CTS tests
in the dEQP-VK.api.image_clearing.clear_color_image.* group.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 7bdccd104b)
[Emil Velikov: rgb9e5 header is renamed in master
s/format_rgb9e5.h/u_format_rgb9e5.h/]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
This needs to set the src swizzle so it doesn't access the .zw
members ever when we are just emitting a 0 constant here.
This fixes:
vert-conversion-explicit-dvec3-bvec3.shader_test
and a bunch of other fp64 tests on softpipe and radeonsi.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 26187f3890)
var_range_end(v, n) loops over the n components of variable number v and
finds the maximum value, giving the last use of any component of v.
Therefore it expects v to correspond to the variable associated with the
.x channel of the VGRF.
var_from_reg() however returns the variable for the first channel of the
VGRF, post-swizzle.
So, if the last register had a swizzle with y, z, or w in the swizzle
component, we would read out of bounds. For any other register, we would
read liveness information from the next register.
The fix is to convert the src_reg to a dst_reg in order to call the
dst_reg version of var_from_reg() that doesn't consider the swizzle.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit e7c376adfd)
The previous bit disables the whole clipper, including the regular
viewport-related clipping that would go on. The two new bits disable
near and far clipping (separately, as verified with the
depth-clamp-range piglit).
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit cd8e30452f)
The vkCmdDbgMarker{Begin,End} symbols are exported, yet the json does no
advertise that the driver supports the extension. Furthermore the
functions are empty stubs.
Remove those until we get a proper implementation and json notation.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit ebd5dc8826)
With version 1 of the Loader interface there is an internal/private symbol
(vk_icdGetInstanceProcAddr) which is used to retrieve all the API from the
Vulkan entrypoints from the ICD. Implying that exposing the Vulkan API is not
recommended.
Version 2 goes a step further explicitly forbiding the ICD from exposing Vulkan
symbols (and adding a negotiation API)
As a reference:
- Nvidia 367.35
Missing negotiation API - version 1.
Exposes only vk_icdGetInstanceProcAddr.
- AMD 16.30.3.306809
Have negotiation API - version 2,
Exposes vk_icdGetInstanceProcAddr.
Exposes a couple of Vulkan entry points - seems to be in violation with the spec.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 49394e8d77)
Hide the internal symbols and annotate the vk_icdGetInstanceProcAddr as public
since the loader needs it (since v1 of the loader interface).
v2: Add VISIBILITY_CFLAGS to AM_CFLAGS (Ken)
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> (v1)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 40e4fff563)
The "Barrier Count" field goes in 14:9 of m0.2. The vec4 backend
correctly shifts by 9, but the scalar backend only shifted by 8.
It's not like this changed - I think I just made a typo when writing
the original scalar TCS backend code.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
(cherry picked from commit d14dd727f4)
The first simply picks the bany_inequal[234] opcodes based on the SSA
def's number of components. The latter implicitly compares with zero
to achieve the same semantics of GLSL's any().
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
(cherry picked from commit d8971128ac)
GL_EXT_packed_float, 2.1.B Unsigned 10-Bit Floating-Point Numbers:
0.0, if E == 0 and M == 0,
2^-14 * (M / 32), if E == 0 and M != 0,
2^(E-15) * (1 + M/32), if 0 < E < 31,
INF, if E == 31 and M == 0, or
NaN, if E == 31 and M != 0,
In the second case (E == 0 and M != 0), we were multiplying the mantissa
by 2^-20, when we should have been multiplying by 2^-19 (which is
2^(-14 + -5), or 2^-14 * 2^-5, or 2^-14 / 32).
The previous section defines the formula for 11-bit numbers, which is:
2^-14 * (M / 64), if E == 0 and M != 0,
In other words, we had accidentally copy and pasted the 11-bit code
to the 10-bit case, and neglected to change the exponent.
Fixes dEQP-GLES3.functional.pbo.renderbuffer.r11f_g11f_b10f_triangles
when run with surface dimensions of 1536x1152 or 1920x1080.
Cc: mesa-stable@lists.freedesktop.org
References: https://code.google.com/p/chrome-os-partner/issues/detail?id=56244
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Stephane Marchesin <stephane.marchesin@gmail.com>
Reviewed-by: Antia Puentes <apuentes@igalia.com>
(cherry picked from commit 01e99cba04)
There's no guarantee that there is one, and we don't need one anyway.
Fixes piglit tests:
glx@glx-fbconfig-bad
glx@glx_ext_import_context@import context, multi process
glx@glx_ext_import_context@import context, single process
Fixes: 2e3f067458 ("glx: fix error code when there is no context bound")
Cc: "11.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
(cherry picked from commit 4ac640e3d2)
It's fairly rare that the BB layout puts BBs after the exit block, which
is likely the reason these issues lingered for so long.
This fixes a fraction of issues with the giant pixmark piano shader.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Cc: <mesa-stable@lists.freedesktop.org>
(cherry picked from commit e988999791)
Section 3.4 (Preprocessor) of the GLSL ES 3.00 spec says:
It is an error to undefine or to redefine a built-in (pre-defined)
macro name.
The GLSL ES 1.00 spec does not contain this text.
Section 3.3 (Preprocessor) of the GLSL 1.30 spec says:
#define and #undef functionality are defined as is standard for C++
preprocessors for macro definitions both with and without macro
parameters.
At least as far as I can tell GCC allow '#undef __FILE__'. Furthermore,
there are desktop OpenGL conformance tests that expect '#undef
__VERSION__' and '#undef GL_core_profile' to work.
Fixes:
GL45-CTS.shaders.preprocessor.definitions.undefine_version_vertex
GL45-CTS.shaders.preprocessor.definitions.undefine_version_fragment
GL45-CTS.shaders.preprocessor.definitions.undefine_core_profile_vertex
GL45-CTS.shaders.preprocessor.definitions.undefine_core_profile_fragment
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 50b49d242d)
Squashed with commit
glcpp: Update tests for new #undef of built-in macro rules.
Ian recently changed the preprocessor to allow this in most GLSL
versions, but not GLSL ES 3.00+. This patch converts the existing
test that expects a failure to a #version 300 es shader, and adds
a #version 110 shader to make sure that it's allowed.
Fixes 'make check'.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97307
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Tested-by: Vinson Lee <vlee@freedesktop.org>
(cherry picked from commit 1f47f78fc3)
The pass isn't really control-flow aware and you can get into case where it
tries to combine instructions from different blocks. This can actually
lead to an assertion failure when removing unneeded instructions if part of
the vector is set in one block and part in another. This prevents
regressions in the next commit.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 4c3a6b07e2)
This is the proper fix for Overlord and Witcher 2 hangs.
The hang condition is that 1 app must write to MRT0 and MRT1 from a pixel
shader while MRT1 is disabled in CB_TARGET_MASK (does this generate
unflushable pixel quads? I don't know), and another app (e.g. Glamor)
must enable dual source blending in both MRT0 and MRT1. The hw gets
confused, which leads to corruption and hangs.
Cc: 12.0 11.2 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
(cherry picked from commit 947e0614d0)
We need to subtract VARYING_SLOT_PATCH0, not VARYING_SLOT_VAR0.
Since "patch" only applies to inputs and outputs, we can just handle
this once outside the switch statement, rather than replicating the
check twice and complicating the earlier conditions.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
(cherry picked from commit 398428f406)
This assertion is bogus. Varying structs, and arrays of structs, are
allowed by GLSL, and we can see them here. While we currently don't
have any partial-variable support for those, simply returning false
and marking the entire thing as used is certainly legitimate.
I believe this is often swept under the rug by varying packing,
but that's disabled in certain tessellation situations.
Hit by 20 dEQP-GLES31.functional.tessellation.user_defined_io.* tests.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
(cherry picked from commit 4a49851da1)
android.opengl.cts.WrapperTest#testGetIntegerv1 CTS test calls
eglTerminate, followed by eglReleaseThread. A similar case is
observed in this bug: https://bugs.freedesktop.org/show_bug.cgi?id=69622,
where the test calls eglTerminate, then eglMakeCurrent(dpy, NULL, NULL, NULL).
With the current code, dri2_dpy structure is freed on eglTerminate
call, so the display is not initialized when eglReleaseThread calls
MakeCurrent with NULL parameters, to unbind the context, which
causes a a segfault in drv->API.MakeCurrent (dri2_make_current),
either in glFlush or in a latter call.
eglTerminate specifies that "If contexts or surfaces associated
with display is current to any thread, they are not released until
they are no longer current as a result of eglMakeCurrent."
However, to properly free the current context/surface (i.e., call
glFlush, unbindContext, driDestroyContext), we still need the
display vtbl (and possibly an active dri dpy connection). Therefore,
we add some reference counter to dri2_egl_display, to make sure
the structure is kept allocated as long as it is required.
One drawback of this is that eglInitialize may not completely reinitialize
the display (if eglTerminate was called with a current context), however,
this seems to meet the EGL spec quite well, and does not permanently
leak any context/display even for incorrectly written apps.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 9ee683f877)
Squashed with commit
egl/dri2: dri2_make_current: Release previous context's display
eglMakeCurrent can also be used to change the active display. In that
case, we need to decrement ref_count of the previous display (possibly
destroying it), and increment it on the next display.
Also, old_dsurf/old_rsurf cannot be non-NULL if old_ctx is NULL, so
we only need to test if old_ctx is non-NULL.
v2: Save the old display before destroying the context.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97214
Fixes: 9ee683f877 (egl/dri2: Add reference count for dri2_egl_display)
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reported-by: Alexandr Zelinsky <mexahotabop@w1l.ru>
Tested-by: Alexandr Zelinsky <mexahotabop@w1l.ru>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
(cherry picked from commit 78e3cea419)
Squashed with commit
egl/dri2: dri2_initialize: Do not reference-count TestOnly display
In the case where dri2_initialize is called with a TestOnly display,
the display is not actually initialized, so dri2_egl_display always
fails, and we cannot do any reference counting.
Fixes piglit spec@egl_khr_create_context@verify gl flavor (reproducible
with LIBGL_ALWAYS_SOFTWARE=1).
Fixes: 9ee683f877 (egl/dri2: Add reference count for dri2_egl_display)
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reported-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 4f3f8bb59d)
Found with valgrind:
==4841== Invalid read of size 4
==4841== at 0x56BDC80: dri2_initialize (egl_dri2.c:783)
==4841== by 0x56BAFE5: _eglMatchAndInitialize (egldriver.c:261)
==4841== by 0x56BB15E: _eglMatchDriver (egldriver.c:295)
==4841== by 0x56B58C9: eglInitialize (eglapi.c:480)
==4841== by 0x4F537DC: _glfwInitEGL (in /usr/lib64/libglfw.so.3.2)
==4841== by 0x4F4BEFB: _glfwPlatformInit (in /usr/lib64/libglfw.so.3.2)
==4841== by 0x4F46F40: glfwInit (in /usr/lib64/libglfw.so.3.2)
==4841== by 0x402E59: main
==4841== Address 0x6a05824 is 148 bytes inside a block of size 480 free'd
==4841== at 0x4C2B680: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==4841== by 0x56C2AAE: dri2_initialize_x11_swrast (platform_x11.c:1233)
==4841== by 0x56C2AAE: dri2_initialize_x11 (platform_x11.c:1493)
==4841== by 0x56BDCEB: dri2_initialize (egl_dri2.c:805)
==4841== by 0x56BAFAF: _eglMatchAndInitialize (egldriver.c:261)
==4841== by 0x56BB0C9: _eglMatchDriver (egldriver.c:292)
==4841== by 0x56B58C9: eglInitialize (eglapi.c:480)
==4841== by 0x4F537DC: _glfwInitEGL (in /usr/lib64/libglfw.so.3.2)
==4841== by 0x4F4BEFB: _glfwPlatformInit (in /usr/lib64/libglfw.so.3.2)
==4841== by 0x4F46F40: glfwInit (in /usr/lib64/libglfw.so.3.2)
==4841== by 0x402E59: main
==4841== Block was alloc'd at
==4841== at 0x4C2A868: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==4841== by 0x56C2A47: dri2_initialize_x11_swrast (platform_x11.c:1171)
==4841== by 0x56C2A47: dri2_initialize_x11 (platform_x11.c:1493)
==4841== by 0x56BDCEB: dri2_initialize (egl_dri2.c:805)
==4841== by 0x56BAFAF: _eglMatchAndInitialize (egldriver.c:261)
==4841== by 0x56BB0C9: _eglMatchDriver (egldriver.c:292)
==4841== by 0x56B58C9: eglInitialize (eglapi.c:480)
==4841== by 0x4F537DC: _glfwInitEGL (in /usr/lib64/libglfw.so.3.2)
==4841== by 0x4F4BEFB: _glfwPlatformInit (in /usr/lib64/libglfw.so.3.2)
==4841== by 0x4F46F40: glfwInit (in /usr/lib64/libglfw.so.3.2)
==4841== by 0x402E59: main
Signed-off-by: Jan Ziak (http://atom-symbol.net) <0xe2.0x9a.0x9b@gmail.com>
Fixes: 9ee683f877 (egl/dri2: Add reference count for dri2_egl_display)
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 769ac1ec78)
When an application declares varying arrays but does not actually do any
indirect indexing, some array indices may end up unused in the consuming
shader, so the number of input slots that correspond to the array ends
up less than the array_size.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 185b0c15ab)
Since commit d938b8c, the sample locations are no longer set unconditionally,
so we need to set the atom to dirty on all chips, not just Polaris.
Cc: 12.0 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 3d69357da9)
The regression was introduced by commit d938b8c. The problem here is that in
order to use the small primitive filter, we need to explicitly set the sample
locations to 0. But the DB doesn't properly process the change of sample
locations without a flush, and so we can end up with incorrect Z values.
Instead of doing a flush, just disable the small primitive filter when MSAA
is force-disabled.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96908
Cc: 12.0 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f755da0f2f)
One of the WebGL 2.0 conformance tests is trying to call
glGenerateMipmaps with a width and height of 0. With the meta
implementation, this generates a "framebuffer attachment incomplete"
status, and falls back to the CPU path, calling MapTextureImage.
Except that there's no actual texture to map, and we assert fail.
There's no work to do in this case. The test expects it to succeed,
so just return early with no error and avoid hassling the driver.
Cc: mesa-stable@lists.freedesktop.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96911
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit f80bea2d80)
The GL_EXT_texture_format_BGRA8888 extension specification defines a
GL_BGRA_EXT unsized internal format (which is a little odd - usually
BGRA is a pixel transfer format). The extension is written against
the ES 1.0 specification, so it's a little hard to map, but I believe
it's effectively adding it to the table used here, so we should allow
it here as well.
Note that GL_EXT_texture_format_BGRA8888 is always enabled (dummy_true),
so we don't need to check if it's enabled here.
This fixes mipmap generation in Skia and ChromeOS.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
References: https://bugs.chromium.org/p/chromium/issues/detail?id=630371
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reported-by: Stéphane Marchesin <marcheu@chromium.org>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit cb70773129)
Commit 52e75dcb8c made nir_lower_io
start using nir_intrinsic_set_base instead of writing const_index[0]
directly. However, those intrinsics apparently don't /have/ a base,
so this caused assert failures.
However, the old code was happily setting non-existent const_index
fields, so it was pretty bogus too.
Jason pointed out that load_shared and store_shared have a base,
and that the i965 driver uses that field. So presumably atomics
should have one as well, so that loads/stores/atomics all refer
to variables with consistent addressing.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
(cherry picked from commit cf6f2d3ce7)
We always resort to the pull model for instanced GS inputs. So, we'd
better include the VUE handles, or else we can't actually pull anything.
Ian reports that on his branch with OES_geometry_shader enabled,
this fixes a bunch of dEQP-GLES31.functional.geometry_shading tests::
- instanced.draw_2_instances_geometry_2_invocations
- instanced.draw_2_instances_geometry_8_invocations
- instanced.draw_4_instances_geometry_2_invocations
- instanced.draw_4_instances_geometry_8_invocations
- instanced.draw_8_instances_geometry_2_invocations
- instanced.draw_8_instances_geometry_8_invocations
- instanced.geometry_2_invocations
- instanced.geometry_32_invocations
- instanced.geometry_8_invocations
- instanced.geometry_max_invocations
- instanced.geometry_output_different_2_invocations
- instanced.geometry_output_different_32_invocations
- instanced.geometry_output_different_8_invocations
- instanced.geometry_output_different_max_invocations
- instanced.invocation_output_vary_by_attribute
- instanced.invocation_output_vary_by_texture
- instanced.invocation_output_vary_by_uniform
- query.primitives_generated_instanced
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Tested-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 2db357e4c3)
Encapsulate the test for which flags are needed to get a compiler to
support certain features. Along with this, give various options to try
for AVX and AVX2 support. Ideally we want to use specific instruction
set feature flags, like -mavx2 for instance instead of -march=haswell,
but the flags required for certain compilers are different. This
allows, for AVX2 for instance, GCC to use -mavx2 -mfma -mbmi2 -mf16c
while the Intel compiler which doesn't support those flags can fall
back to using -march=core-avx2.
This addresses a bug where the Intel compiler will silently ignore the
AVX2 instruction feature flags and then potentially fail to build.
v2: Pass preprocessor-check argument as true-state instead of
false-state for clarity.
v3: Reduce AVX2 define test to just __AVX2__. Additional defines suchas
__FMA__, __BMI2__, and __F16C__ appear to be inconsistently defined
w.r.t thier availability.
v4: Fix C++11 flags being added globally and add more logic to
swr_require_cxx_feature_flags
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Tim Rowley <timothy.o.rowley@intel.com>
Tested-by: Tim Rowley <timothy.o.rowley@Intel.com>
Signed-off-by: Chuck Atkins <chuck.atkins@kitware.com>
(cherry picked from commit c1bf6692be)
This fixes a bunch of multisample piglit tests on GM206, like
bin/arb_texture_multisample-texelfetch 2 -auto -fbo
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
(cherry picked from commit e7b2ce5fd8)
[Emil Velikov: resolve conflicts]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/gallium/drivers/nouveau/nvc0/nvc0_state_validate.c
Commit 87d062a940 ("i965: Fix shared local memory size for Gen9+.")
added u_math.h include which broke the Android build:
In file included from external/mesa3d/src/intel/isl/isl_storage_image.c:25:
In file included from external/mesa3d/src/mesa/drivers/dri/i965/brw_compiler.h:29:
external/mesa3d/src/mesa/main/macros.h:35:10: fatal error: 'util/u_math.h' file not found
^
Add the missing include paths for libmesa_isl.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Kenneth Garunke <kenneth@whitecape.org>
Nominated-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 789ed13284)
The bulk of this is the same. There are just a couple fields that only
exist on one generation or another, and we can easily handle those with
an #ifdef.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit bfd9942cdc)
The Gen7/7.5 clip code used APIMODE_OGL, while the Gen8+ clip code used
APIMODE_D3D. The meaning hasn't changed, so one of these must be wrong.
It appears that the hardware documentation is completely wrong. It
claims that the "API Mode" bit means:
0h APIMODE_OGL NEAR_VP boundary == 0.0 (NDC)
1h APIMODE_D3D NEAR_VP boundary == -1.0 (NDC)
However, DirectX typically uses 0.0 for the near plane, while unextended
OpenGL uses -1.0. i965's gen6_clip_state.c uses APIMODE_D3D for the
GL_ZERO_TO_ONE case, so I believe the meanings are backwards from what
the documentation says.
Section 23.2 ("Primitive Clipping") of the Vulkan 1.0.21 specification
contains the following equations:
-w_c <= x_c <= w_c
-w_c <= y_c <= w_c
0 <= z_c <= w_c
This means that Vulkan follows D3D semantics.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 0d77f08042)
This matches what we do for cube maps where logical_depth0 is in number of
face-layers rather than number of cubes. This does mean that we will
temporarily be setting the surface bounds too loose for cube map textures
but we are already setting them too loose for cube arrays and we will be
fixing that in the next commit anyway.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Chris Forbes <chrisforbes@google.com>
Cc: "12.0 11.2 11.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit e19b7f7f1b)
The GL API and mesa internals do this differently than we do. In GL, there
is no depth parameter for 1-D arrays and height is used. In the i965
miptree code we do the sane thing and make height == 1 and use depth for
number of slices. This makes for a mismatch every time we create a 1-D
array texture from GL. Instead of actually solving this problem, we just
said "1-D is hard, let's make sure it works no matter which way we pass the
parameters" and called it a day.
This commit fixes the one GL -> i965 transition point where we weren't
already handling 1-D array textures to do the right thing and then replaces
the magic fixup code with an assert that you're doing the right thing.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Chris Forbes <chrisforbes@google.com>
Cc: "12.0 11.2 11.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit d4d505d0b0)
This 'last' variable used in FindGLXFunction(...) may become negative,
but has been defined as unsigned int resulting in an overflow,
finally resulting in a segfault when accessing _glXDispatchTableStrings[...].
Fixed this by definining it as signed int. 'first' variable also needs to be
defined as signed int. Otherwise condition for while loop fails due to C
implicitly converting signed to unsigned values before comparison.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Stefan Dirsch <sndirsch@suse.de>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 27ef7bfd6c)
Current implementation of the DRI image loader does not free the images
created in get_back_bo() and so leaks memory. Moreover, it creates a new
image every time the DRI driver queries for buffers, even if the backing
native buffer has not changed. leaking memory again.
This patch adds missing call to destroyImage() in droid_enqueue_buffer()
and a check if image is already created to get_back_bo() to fix the
above.
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 9e1248d075)
As the spec allows for {server,client}_wait_sync to be called without
currently bound context, while our implementation requires context
pointer.
v2: Add a mutex and acquire it for the duration of
brw_fence_client_wait() and brw_fence_is_completed() as suggested
by Chad.
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
(cherry picked from commit 4f48674d51)
Without this, if a configuration is, say, available only on GLES2/3, but
not on GLES1, and is rejected by the dri module's bindContext call,
eglMakeCurrent fails with error "EGL_SUCCESS".
In this patch, we set error to EGL_BAD_MATCH, which is what CTS/dEQP
dEQP-EGL.functional.surfaceless_context expect.
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 9bebef4034)
To avoid blocking other EGL calls, release the display mutex before
we enqueue buffer to android frameworks and re-acquire the mutex
upon return.
v2: moved lock/unlock inside droid_window_enqueue_buffer().
TEST=verify pinch zoom in Photos app no longer causes hangs
Signed-off-by: Haixia Shi <hshi@chromium.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 1ea233c6f3)
An earlier patch fixed the problem for classic drivers, however Gallium
was still left broken. This patch applies the same workaround to
Gallium, when compiled for Android. Following is a quote from the
original patch:
0cbc90c57c mesa: dri: Add shared glapi to LIBADD on Android
/system/vendor/lib/dri/*_dri.so actually depend on libglapi: without
this, loading the so file fails with:
cannot locate symbol "__emutls_v._glapi_tls_Context"
On non-Android (non-bionic) platform, EGL uses the following
workflow, which works fine:
dlopen("libglapi.so", RTLD_LAZY | RTLD_GLOBAL);
dlopen("dri/<driver>_dri.so", RTLD_NOW | RTLD_GLOBAL);
However, bionic does not respect the RTLD_GLOBAL flag, and the dri
library cannot find symbols in libglapi.so, so we need to link
to libglapi.so explicitly. Android.mk already does this.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 70a28afb29)
Analogous to previous commit.
Note: scons always uses OOT builds, while the in-tree generated files
could be created either manually or by the autoconf build.
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>
Cc: Alexander von Gluck IV <kallisti5@unixzen.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 1c7c0d77ac)
[Emil Velikov: remove not-applicable "Dir('main')" entry]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/mesa/SConscript
In the case of building in out-of-tree fashion, while having generated
in-tree sources, the latter [likely stale] files will be used.
Flip the order to prevent that.
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit eafa82e20e)
Mark both L8_SRGB and L8A8_SRGB as non-renderable (the latter already
didn't have the bind flags). This makes the state tracker pick a
different format when rendering is required, or mark the fb as
incomplete. This fixes:
bin/getteximage-formats init-by-clear-and-render -auto -fbo
bin/getteximage-formats init-by-rendering -auto -fbo
which previously ran into srgb-encoding differences.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit ed9dd3bcd9)
Inspired by fix for mem leak of vdpau interop, resource_from_handle
set texture reference count, that need to be decreased and released,
recall there is a similar case for DRI3, that is with VA-API glx
extension, there is temporary TFP(texture from pixmap), we target it
through dma-buf. leak happens when without count down the reference.
Checked and found with mpv vo=opengl case, there only one static TFP,
the leak happens once, but for totem player using gstreamer VA-API glx,
the dynamic TFP for each frame, so leak quite a bit.
This fixes mem leak for mpv and totem.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 134d6e4e4f)
The old calculation, which used view->offset, encorporated buffer->offset
into the size calculation where it doesn't belong. This meant that, if
buffer->offset > buffer->size, you would always get a negative size. This
fixes 170 dEQP-VK.renderpass.attachment.* Vulkan CTS tests on Haswell.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 593731ea3c)
[Emil Velikov: s|bpb / 8|bs|g]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/intel/vulkan/anv_image.c
We can totally do it, we were just only setting up one BLEND_STATE and, now
that the code is unified with gen8, we should be handling it correctly.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f124f4a394)
This renames BLEND_STATE to BLEND_STATE_ENTRY and adds an new struct
BLEND_STATE which is just an array of 8 BLEND_STATE_ENTRYs. This will make
it much easier to write gen-agnostic blend handling code.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit aaa202ebe7)
This avoids a failed assert(img->_BaseFormat != -1) in
init_teximage_fields_ms() because the internalFormat argument is GL_NONE.
This was hit when using glTexStorage() to do a proxy texture test.
Fixes a failure with the updated Piglit tex3d-maxsize test.
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit e477d92c94)
Set limits that are consistent with ISL's assertions in
isl_genX(buffer_fill_state_s)() and Anvil's format-DescriptorType
mapping in anv_isl_format_for_descriptor_type().
Fixes the following new crucible tests:
* stress.limits.buffer-update.range.uniform
* stress.limits.buffer-update.range.storage
These tests are in this patch: https://patchwork.freedesktop.org/patch/98726/
Cc: 12.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit a5748cb920)
Section 13.2.3. of the Vulkan spec requires that implementations be able to
bind sparsely-defined Descriptor Sets without any errors or exceptions.
When binding a descriptor set that contains a dynamic buffer binding/descriptor,
the driver attempts to dereference the descriptor's buffer_view field if it is
non-NULL. It currently segfaults on undefined descriptors as this field is never
zero-initialized. Zero undefined descriptors to avoid segfaulting. This
solution was suggested by Jason Ekstrand.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96850
Cc: 12.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit fd16e64321)
in svga_init_shader_key_common(). Since the CSO module only tracks
sampler views for fragment shaders, the number of samplers and sampler
views can be mismatched for other types of shaders. This situation
triggered an assertion in Chrome with maps.google.com
This patch adds defensive code to handle that situation.
Fixes VMware bug 1694027
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
(cherry picked from commit 50a669de4e)
The uninitialized list should be checked and returned.
Thank Julien for the notification and suggested fix.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit b9d10e79c8)
This is way better than the stupid string approach especially since you
could overflow the string. Again, I thought I had something better at one
point but it obviously got lost.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit b919100d61)
It was returning true if the function types have different lengths rather
than false. This was new with the SPIR-V to NIR pass and I thought I'd
fixed it a while ago but it may have gotten lost in rebasing somewhere.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 11ac1c4dbb)
I have no idea why we were multiplying by 4 before. The offsets we get
from SPIR-V are in bytes and so is nir->num_uniforms so there's no need to
do any adjustment whatsoever.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 49476576dd)
Even when the backend driver does not support ETC formats, we handle the
decoding into an uncompressed backing texture. However as far as core
mesa is concerned, it's an ETC texture and we should return the relevant
ETC mesa format. This condition can get hit when using glTexStorage to
create the texture object.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 00d4315d37)
The size of the driver constant buffer for each stage should be 2048
and not 512 because it has been increased recently for buffers/images.
While we are at it, do the same change for indirect draws.
This fixes all ARB_shader_draw_parameters tests on GM107.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: 12.0 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 31a615677b)
This fixes the following piglits:
arb_arrays_of_arrays-basic-imagestore-mixed-const-non-const-uniform-index
arb_arrays_of_arrays-basic-imagestore-mixed-const-non-const-uniform-index2
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: 12.0 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 19d0450b27)
Unlike SC, the small primitive filter does not automatically use center
locations in 1xAA mode, so this is needed to avoid artifacts caused by
the small primitive filter discarding triangles that it shouldn't.
As a side effect of how the effective number of samples is now calculated,
this patch also avoids submitting the sample locations for line/poly smoothing
when they're not really needed.
Cc: 12.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit d938b8c0bf)
This hardware race condition has caused problems several times already
(see "i965: Fix cache pollution race during L3 partitioning set-up.",
"i965: Fix brw_render_cache_set_check_flush's PIPE_CONTROLs." and
"i965: intel_texture_barrier reimplemented"). The problem is that
whenever we attempt to both flush and invalidate multiple caches with
a single pipe control command the flush and invalidation happen in
reverse order, so the contents flushed from the R/W caches aren't
guaranteed to become visible from the invalidated caches after the
PIPE_CONTROL command completes execution if some concurrent rendering
workload happened to pollute any of the invalidated R/O caches in the
short window of time between the invalidation and flush.
This makes sure that brw_emit_pipe_control_flush() has the effect
expected by most callers of making the contents flushed from any R/W
caches visible from the invalidated R/O caches.
Cc: "12.0 11.1 11.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 37b901003b)
Review carefully, it sucks to have to keep track of the number of
command packet dwords emitted in the batch epilogue manually. The
MI_REPORT_PERF_COUNT_BATCH_DWORDS calculation was obviously wrong.
Cc: "12.0 11.1 11.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 0bd3a121c6)
There were two places in the driver doing a pipe control VF cache
flush, one of them was missing this workaround, move it down into
brw_emit_pipe_control_flush to make sure we don't miss it again.
Cc: "12.0 11.1 11.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
(cherry picked from commit a10879f48c)
With commit f41f78cda1 ("radeonsi: drop the DRAW_PREAMBLE packet on
Polaris") we failed to attribute that the separate current/prev
radeon_winsys_cs_chunk(s) are not applicable/available in branch.
The latter of which introduced with commit 89ba076de4 ("radeon/winsys:
introduce radeon_winsys_cs_chunk").
Just drop "current." from the respective places to get things up and
running again.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96864
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
SVGA_3D_CMD_DX_GENRATE_MIPMAP & SVGA_3D_CMD_DX_SET_PREDICATION commands
are not presents in fedora 24 kernel module. Because of this
reason application like supertuxkart are not running.
v2: Add few comments and code modifications suggested by Brian P.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
(cherry picked from commit 7988513ac3)
Since the function is exported like any other
public api function and put in the header
as if you could link against it, export it also
from shared objects.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 13affe0d3f)
Some games are sloppy.. perhaps because it is defined behavior for DX or
perhaps because nv blob driver defaults things to zero.
So add driconf param to force uninitialized variables to default to zero.
This issue was observed with rust, from steam store. But has surfaced
elsewhere in the past.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit f78a6b1ce3)
Devices with smaller GMEM size need more tiles. On db410c at 2048x1152,
glmark2 shadow needed ~330 tiles for fullscreen. Lets bump it up to
512. (Maybe with MRT you could end up needing more, but at that point
things are probably going to be painfully slow.)
Signed-off-by: Rob Clark <robdclark@gmail.com>
(cherry picked from commit 7295428e41)
Atm the actual rule will expand to foo.o which is used for static
libraries only.
Thus the automake manual recommendation [to use OBJEXT] won't help us,
since since we're working with a shared library.
Thus let's 'demote' the file and add it back to BUILT_SOURCES. This will
manage all the complexity for us, at the (existing expense) of working
only with the all, check and install targets.
The crazy (why the issue was hard to spot):
If the dependencies (.deps/*.Plo) are already created one can alter the
anv_device.$(OBJEXT) line and/or nuke it all together. That won't lead
to any warnings/issues, even though the Makefile is regenerated.
Moral of the story:
Always rm -rf top_builddir or don't resolve the dependencies manually
and use BUILT_SOURCES.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96825
Fixes: d7a604c3f7a ("anv: use cache uuid based on the build timestamp.")
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: Mark Janes <mark.a.janes@intel.com>
(cherry picked from commit 9618e2a24c)
It has proven subtle to get it right both from the build side POV (see
commit list below) and builders due to their varying workflows.
Furthermore it does not fully fulfil the reason why it was enforced -
to detect uniqueness between different builds, in order to distinguish
and invalidate Vulkan/GL caches.
With that having a much better solution (previous commit) we can drop
this solution.
This effectively reverts the following commits:
359d9dfec3 ("mesa: automake: add directory prefix for git_sha1.h")
2c424e00c3 ("mesa: automake: ensure that git_sha1.h.tmp has the right
attributes")
b7f7ec7843 ("mesa: automake: distclean git_sha1.h when building OOT")
8229fe68b5 ("automake: get in-tree `make distclean' working again.")
Cc: Timo Aaltonen <tjaalton@debian.org>
Cc: Haixia Shi <hshi@chromium.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
(cherry picked from commit 22e9357028)
Do not rely on the git sha1:
- its current truncated form makes it less unique
- it does not attribute for local (Vulkand or otherwise) changes
Use a timestamp produced at the time of build. It's perfectly unique,
unless someone explicitly thinkers with their system clock. Even then
chances of producing the exact same one are very small, if not zero.
v2: Remove .tmp rule. Its not needed since we want for the header to be
regenerated on each time we call make (Eric).
v3:
- Honour SOURCE_DATE_EPOCH, to make the build reproducible (Michel)
- Replace the generated header with a define, to prevent needless
builds on consecutive `make' and/or `make install' calls. (Dave)
v4:
- Keep the timestamp generation at make time. (Jason)
v5:
- Ensure that file is regenerated on incremental builds.
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit addb099ce8)
This reverts commit 27d456cc87.
DOH, what seems right and what is right with fp64 are always
two different things.
This regressed:
spec@arb_gpu_shader_fp64@shader_storage@layout-std140-fp64-mixed-shader
on radeonsi
Reported-by: Michel Dänzer <michel@daenzer.net>
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit cb728df967)
In presence of an indirect image access, the base offset should be
zeroed because the stride will be computed twice. This is a pretty
rare situation but it can happen when tex.r > 0.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f3b9fff3c3)
When emitting OP_SUB, the sign bit for FADD and FADD32I is not
at the same position. It's at position 45 for FADD but 51 for FADD32I.
This fixes the following piglit test:
tests/spec/arb_fragment_program/fdo30337b.shader_test
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: <mesa-stable@lists.freedesktop.org>
(cherry picked from commit cb828b7b18)
The image usage specified by the caller of vkCreateSwapchainKHR should be
passed onto the internal image creation. Otherwise the driver might later
crash when the user tries to use the image as a combined sampler even though
the creation was explicitly created with VK_IMAGE_USAGE_TRANSFER_SRC_BIT.
Leaving the previous VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT as this might be
expected even if the swapchain is created without any flag.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96791
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit dbbc4fb4cc)
Immediates are stored into a separate table, and are
consolidated, so if we get an immediate we don't need
to offset it as the index it has is correct.
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 27d456cc87)
Fixes a regression introduced by commit 42624ea83 which triggered
an assertion in
dEQP-GLES2.functional.texture.completeness.cube.not_positive_level_0
While stImage must have a non-zero size as verified by the caller, we also
look at the size of the base image in an attempt to make a better guess at
the level0 size (this is important when the base image size is odd). However,
the base image may have a zero size even when it exists.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96629
Cc: 12.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
(cherry picked from commit 0ba053b34c)
This aligns the 4-element color float array to 16 byte boundaries. This
should allow compiler vectorizers to generate better optimizations.
Also fixes broken vectorization generated by Intel compiler.
v2: Fixed indentation and added a lengthy comment explaining the
reason for the alignment.
Cc: <mesa-stable@lists.freedesktop.org>
Reported-by: Tim Rowley <timothy.o.rowley@intel.com>
Tested-by: Tim Rowley <timothy.o.rowley@intel.com>
Signed-off-by: Chuck Atkins <chuck.atkins@kitware.com>
Acked-by: Roland Scheidegger <sroland@vmware.com>
(cherry picked from commit d8d6091a84)
Encapsulate the test for which flags are needed to get a compiler to
support certain features. Along with this, give various options to try
for AVX and AVX2 support. Ideally we want to use specific instruction
set feature flags, like -mavx2 for instance instead of -march=haswell,
but the flags required for certain compilers are different. This
allows, for AVX2 for instance, GCC to use -mavx2 -mfma -mbmi2 -mf16c
while the Intel compiler which doesn't support those flags can fall
back to using -march=core-avx2.
This addresses a bug where the Intel compiler will silently ignore the
AVX2 instruction feature flags and then potentially fail to build.
v2: Pass preprocessor-check argument as true-state instead of
false-state for clarity.
v3: Reduce AVX2 define test to just __AVX2__. Additional defines suchas
__FMA__, __BMI2__, and __F16C__ appear to be inconsistently defined
w.r.t thier availability.
v4: Fix C++11 flags being added globally and add more logic to
swr_require_cxx_feature_flags
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Tim Rowley <timothy.o.rowley@intel.com>
Tested-by: Tim Rowley <timothy.o.rowley@Intel.com>
Signed-off-by: Chuck Atkins <chuck.atkins@kitware.com>
(cherry picked from commit c1bf6692be)
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Khronos recommends that the GLES 3.1 library also be called libGLESv2.
It also requires that functions be statically linkable from that
library.
NOTE: Mesa has supported the EGL_KHR_get_all_proc_addresses extension
since at least Mesa 10.5, so applications targeting Linux should use
eglGetProcAddress to avoid problems running binaries on systems with
older, non-GLES 3.1 libGLESv2 libraries.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>
Cc: Mike Gorchak <mike.gorchak.qnx@gmail.com>
Reported-by: Mike Gorchak <mike.gorchak.qnx@gmail.com>
Acked-by: Chad Versace <chad.versace@intel.com>
(cherry picked from commit 5921f372c8)
Because Polaris uvd fw interface changes, the driver need to check fw version
to apply right interface. This change is to add uvd fw version.
Signed-off-by: sonjiang <sonny.jiang@amd.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
(cherry picked from commit 28f85eab49)
[Emil Velikov: resolve trivial s/bool/boolean/ conflicts]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/gallium/drivers/radeon/radeon_winsys.h
Rely on the existence of a second destination when emitting a setcond
flag is dangerous, because this doesn't mean that the flag has been
correctly set. Instead rely on flagsDef like what emitX() does
for flagsSrc.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: <mesa-stable@lists.freedesktop.org>
(cherry picked from commit cc97b6a34a)
emit_urb_writes() contains code to emit an EOT write with no actual
data when there are no output varyings. This makes sense for the VS
and TES stages, where it's called once at the end of the program.
However, in the geometry shader stage, emit_urb_writes() is called once
for every EmitVertex(). We explicitly emit a URB write with EOT set at
the end of the shader, separately from this path. So we'd better not
terminate the thread. This could get us into trouble for shaders which
do EmitVertex() with no varyings followed by SSBO/image/atomic writes.
It also caused us to emit multiple sends with EOT set, which apparently
confuses the register allocator into not using g112-g127 for all but
the first one. This caused EU validation failures in OglGSCloth
shaders in shader-db. (The actual application was fine, but shader-db
thinks there are no outputs because it doesn't understand transform
feedback.)
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
(cherry picked from commit 7e7e501acf)
The only part of an ir_texture which can be an array is the
offsets array in textureGatherOffsets() calls. We don't want
to lower those, because they're required to remain constants.
Fixes textureGatherOffsets with Gallium drivers such as llvmpipe,
which commit ef78df8d3b regressed.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
(cherry picked from commit a36a73a7b8)
These need to be passed from the host in caps structure if they
are larger, this fixes a bunch of tests on Intel hw, that I'd
put the limits too high for.
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit c7cc264ca9)
On MRF platforms, we need to set base_mrf to the first MRF value we'd
like to use for the message. On send-from-GRF platforms, we set it to
-1 to indicate that the operation doesn't use MRFs.
As MRF platforms are becoming increasingly a thing of the past, we've
forgotten to bother with this. It makes more sense to set it to -1 by
default, so we don't have to think about it for new code.
I searched the code for every instance of 'mlen =' in brw_fs*cpp, and
it appears that all MRF-based messages correctly program a base_mrf.
Forgetting to set base_mrf = -1 can confuse the register allocator,
causing it to think we have a large fake-MRF region. This ends up
moving the send-with-EOT registers earlier, sometimes even out of
the g112-g127 range, which is illegal. For example, this fixes
illegal sends in Piglit's arb_gpu_shader_fp64-layout-std430-fp64-shader,
which had SSBO messages with mlen > 0 but base_mrf == 0.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 3e04e3758e)
We currently use CL_INVOCATION_COUNT for the GL_PRIMITIVES_GENERATED
query, which involves passing all primitives to the clipper. When
rasterizer discard is enabled, we program the clipper in REJECT_ALL
mode, rather than using the SOL stage's "Rendering Disable" feature.
See commit f09b91f782 for an explanation
of why we implement GL_PRIMITIVES_GENERATED this way.
Apparently the SOL stage's "Rendering Disable" feature is a lot faster
than having the clipper reject all primitives. It's safe to use when
no GL_PRIMITIVES_GENERATED query is active, as we don't care about
CL_INVOCATION_COUNT incrementing.
This patch makes us use SO_RENDERING_DISABLE when no query is active,
but continues falling back to the clipper in REJECT_ALL mode when the
queries are enabled. It brings back the perf_debug for the clipper
case (which I removed in commit 1f9445ff57, thinking it wasn't useful).
Improves performance in Gl32GSCloth by 84.8303% +/- 2.07132% (n = 10)
on my Broadwell GT2 laptop.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit b0629e6894)
Constant propagation on arrays doesn't make a lot of sense. If the
array is only accessed with constant indexes, then opt_array_splitting
would split it up. Otherwise, we have variable indexing. If there's
multiple accesses, then constant propagation would end up replicating
the data.
The lower_const_arrays_to_uniforms pass creates uniforms for each
ir_constant with array type that it encounters. This means that it
creates redundant uniforms for each copy of the constant, which means
uploading too much data. It can even mean exceeding the maximum number
of uniform components, causing link failures.
We could try and teach the pass to de-duplicate the data by hashing
constants, but it makes more sense to avoid duplicating it in the first
place. We should promote constant arrays to uniforms, then propagate
the uniform access.
Fixes the TressFX shaders from Tomb Raider, which exceeded the maximum
number of uniform components by a huge margin and failed to link.
On Broadwell:
total instructions in shared programs: 9067702 -> 9068202 (0.01%)
instructions in affected programs: 10335 -> 10835 (4.84%)
helped: 10 (Hoard, Shadow of Mordor, Amnesia: The Dark Descent)
HURT: 20 (Natural Selection 2)
loops in affected programs: 4 -> 0
The hurt programs appear to no longer have a constarray uniform, as
all constants were successfully propagated. Apparently before this
patch, we successfully unrolled a loop containing array access, but
only after promoting constant arrays to uniforms. With this patch,
we unroll it first, so all array access is direct, and the array
is split up, and individual constants are propagated. This seems
better.
Cc: mesa-stable@lists.freedesktop.org
Reported-by: Karol Herbst <nouveau@karolherbst.de>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
(cherry picked from commit fb857b5eea)
There's really no point in looking at ir_dereference_array of a
constant. It also misses cases like:
(assign () (var_ref tmp) (constant (array ...) ...))
No changes in shader-db, but keeps it working after the next commit.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
(cherry picked from commit ef78df8d3b)
The scalar backend currently doesn't support variable indexing on
temporary arrays, but it does support it on uniform arrays, and
some stages support it for input arrays. Make sure these are
propagated through before exploding indirects into piles of
if-ladders unnecessarily.
On Broadwell, no instruction count change in shader-db.
total cycles in shared programs: 80675652 -> 80674928 (-0.00%)
cycles in affected programs: 649972 -> 649248 (-0.11%)
helped: 386
HURT: 165
This will help avoid code quality regressions in a future commit.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
(cherry picked from commit f7741c5211)
Previously, we failed to split constant arrays. Code such as
int[2] numbers = int[](1, 2);
would generates a whole-array assignment:
(assign () (var_ref numbers)
(constant (array int 4) (constant int 1) (constant int 2)))
opt_array_splitting generally tried to visit ir_dereference_array nodes,
and avoid recursing into the inner ir_dereference_variable. So if it
ever saw a ir_dereference_variable, it assumed this was a whole-array
read and bailed. However, in the above case, there's no array deref,
and we can totally handle it - we just have to "unroll" the assignment,
creating assignments for each element.
This was mitigated by the fact that we constant propagate whole arrays,
so a dereference of a single component would usually get the desired
single value anyway. However, I plan to stop doing that shortly;
early experiments with disabling constant propagation of arrays
revealed this shortcoming.
This patch causes some arrays in Gl32GSCloth's geometry shaders to be
split, which allows other optimizations to eliminate unused GS inputs.
The VS then doesn't have to write them, which eliminates the entire VS
(5 -> 2 instructions). It still renders correctly.
No other change in shader-db.
v2: Drop !AOA check and improve a comment (feedback from Tim Arceri).
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
(cherry picked from commit c264fdbc07)
opt_constant_propagation.cpp contains constant folding code which can
actually do constant propagation in some cases. It was happily
propagating constants into the left-hand-side of assignments.
For example,
(assign () (var_ref temp) (constant ...))
would brilliantly be turned into:
(assign () (constant ...) (constant ....))
This is a bigger hammer than necessary - it prevents propagation
into the left-hand-side altogether. We could certainly do better
someday. Notably, the constant propagation pass itself already
takes this approach - it's just the constant propagation pass's
built-in constant folding code (which actually propagates, too)
that was broken.
No change in shader-db, but prevents regressions after future commits.
It seems plausible that this could be hit today, but I haven't seen it
happen.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
(cherry picked from commit acf5444044)
Earlier MSVC 2013 releases have troubles compiling some of our C99 code,
so make sure we have Update 4 to avoid confusion.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 805dbdf06d)
This solves a race condition where we can end up having different stages
stomp on each other because they're all trying to scratch in the same BO
but they have different views of its layout.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit c2f2c8e407)
While we're here, we also fixup MEDIA_VFE_STATE and rename the field in
3DSTATE_VS on gen6-7.5 to be consistent with the others.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 45c0f60999)
The pack header generation scripts can't handle the case where you have
two addresses in the same dword; they just take whatever is the last one.
This meant that the MCS address wasn't properly getting handled. Since we
don't care about append counters, we can just re-arrange the XML for now.
Reviewed-by: Chad Versace <chad.versace@intel.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 89ded099f8)
ISL was being a bit too clever for its own good and lowering the format for
us. This is all well and good *if* we always want to lower it. However,
the GL driver selectively lowers the format depending on whether the
surface is write-only or not.
Reviewed-by: Chad Versace <chad.versace@intel.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit d82322eb18)
This field is ignored by the hardware in this case and, on very large 1-D
textures, it can end up being larger than the maximum allowed value.
Reviewed-by: Chad Versace <chad.versace@intel.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit ce24097abe)
This matches better what happens on gen8 where the "Tiled Surface" and
"Tile Walke" bits are combined into a single two-bit value. This is also
more consistent with what the GL driver does.
Reviewed-by: Chad Versace <chad.versace@intel.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f47e23a8b6)
For depth/stencil 1-D textures on SKL, we want them layed out in the old
format that has been used since gen4. In order for the surface state
fill-out code to handle, this it needs to distinguish based on layout
rather than just dimensionality.
Reviewed-by: Chad Versace <chad.versace@intel.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 5d24e9cfa1)
The docs specify that this only matters for render targets and surfaces
used with typed dataport messages. On some platforms (gen4-6) the Depth
field has more bits than RenderTargetViewExtent so we can have textures
with more levels than we can render to.
Reviewed-by: Chad Versace <chad.versace@intel.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 215282c9f4)
According to the PRM, you can't set SurfaceArray for 3D or buffer textures.
There doesn't seem to be a good reason not to set it when we can. On the
other hand, if we don't set it we can end up getting strange results for
1-layer array textures such as textureSize() returning the wrong results.
Reviewed-by: Chad Versace <chad.versace@intel.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit bb326f7b01)
We already set the bit in the few cases where it's required by the docs so
there's no need to set it all the time. This has no noticable perf impact
for Dota 2 on Vulkan with the time demo I have.
Reviewed-by: Chad Versace <chad.versace@intel.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit d050ffbce9)
This commit switches clear colors to use #if's instead of a C if. This
lets us properly handle SNB where the clear color field doesn't exist.
Reviewed-by: Chad Versace <chad.versace@intel.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 87f0ffa646)
This moves the #if's around so that halign and valign have different sets
of #if conditions. This also prepares us for SNB because isl_to_gen_halign
is not defined at all on gen6.
Reviewed-by: Chad Versace <chad.versace@intel.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 62a5e6e031)
While designated initializers are nice, they also force us to put some
things in the initializer and some things later. Surface state setup is
complicated enough that this really hurts readability in the long run.
Reviewed-by: Chad Versace <chad.versace@intel.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit caf2af4181)
The PRM states that the values put in Width, Height, and Depth should be
various bits from the value size - 1. We seem to have done this wrong
more-or-less from the start.
Reviewed-by: Chad Versace <chad.versace@intel.com>
Cc: "11.1 11.2 12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 2a1cc94d27)
Previously, we were incrementing length but not actually putting anything
in the Y coordinate. This meant that 1-D TXF operations had a garbage
array index. If the surface is emitted as 1-D non-array, the coordinate
gets discarded and it works fine. If it happens to be bound as an array
surface, it may count as an out-of-bounds array access and you get zero.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "11.1 11.2 12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 0195299c86)
The RenderTargetViewExtent field of RENDER_SURFACE_STATE is supposed to be
set to the depth of a 3-D texture when rendering. Unfortunatley, that
field is only 9 bits on Sandy Bridge and prior so we can't actually bind
a 3-D texturing for rendering if it has depth > 512. On Ivy Bridge, this
field was bumpped to 11 bits so we can go all the way up to 2048. On Iron
Lake and prior, we don't support layered rendering and we use OffsetX/Y
hacks to render to particular layers so 2048 is ok there too.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "11.1 11.2 12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 6ba88bce64)
There's special logic around finding gl_FragData. It latches onto any
array with FRAG_RESULT_DATA0. However gl_SecondaryFragDataEXT[], added
by GL_EXT_blend_func_extended, fits those parameters as well. The real
frag data array should have index 0 though, so we can use that to
distinguish them.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96617
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.1 11.2 12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 36ed1b695e)
Ever since c2581a9375, the binding table layout has depended on the
pipeline. This means that whenever we change pipelines we also need to
re-emit binding tables for the new layout.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 35b53c8d47)
SPIR-V treats it as an input but NIR wants the system value. This
shouldn't have been too much of a surprise given that we have to do the
same conversion in the GLSL IR to NIR pass.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 295e03c980)
As far as I can tell, a sequence of glBitmap followed by texture functions
that refer to a texture bound as the framebuffer is well within what should
be allowed.
Found by inspection.
Cc: 11.2 12.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit e7fff3cfe1)
In the unlikely case that a program uses glBitmap to render to a framebuffer
whose texture is bound in a compute shader.
Found by inspection.
Cc: 11.2 12.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit c542b7e43d)
Cherryview and Broxton don't support DW x DW multiplication. We have
piles of code to handle this, but apparently weren't retyping in the
immediate case.
For example,
tests/spec/arb_tessellation_shader/execution/dvec3-vs-tcs-tes
makes the simulator angry about instructions such as:
mul(8) r18<1>:D r10.0<8;8,1>:D 0x00000003:D
Just retype to W or UW. It should be safe on all platforms.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95462
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit cd89c834a8)
Just setting builder->exact isn't sufficient because that only applies to
instructions that are built with the builder but instructions created
manually and only inserted using the builder are left alone.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit bec07b7292)
This pass is similar to propagate_invariance in the GLSL compiler. The
real "output" of this pass is that any algebraic operations which are
eventually consumed by an invariant variable get marked as "exact".
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 202751fbb7)
While mathematically correct, these two optimizations result in an
expression with substantially lower precision than the original. For any
positive finite floating-point value, log2(x) is well-defined and finite.
More precisely, it is in the range [-150, 150] so any sum of logarithms
log2(a) + log2(b) is also well-defined and finite as long as a and b are
both positive and finite. However, if a and b are either very small or
very large, their product may get flushed to infinity or zero causing
log2(a * b) to be nowhere close to log2(a) + log2(b).
This imprecision was causing incorrect rendering in Talos Principal because
part of its HDR rendering process involves doing 8 texture operations,
clamping the result to [0, 65000], taking a dot-product with a constant,
and then taking the log2. This is done 6 or 8 times and summed to produce
the final result which is written to a red texture. In cases where you
have a region of the screen that is very dark, it can end up getting a
result value of -inf which is not what is intended.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96425
Cc: "11.1 11.2 12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 68e308d853)
Apparently, these are deprecated. There's some AutoUpgrade feature which
is supposed to promote these to cmp/select, which apparently doesn't work
with jit code. It is possible it's not actually even meant to work (see
the bug filed against llvm which couldn't provide an answer neither)
but in any case this is meant to be only temporary unless the intrinsics
are really illegal. So, just use the fallback code (which should be cmp/select,
we're actually doing cmp/sext/trunc/select, but in any case llvm 3.9 manages
to optimize this back to pmin/pmax in the end).
This addresses https://llvm.org/bugs/show_bug.cgi?id=28176
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Tested-by: Vinson Lee <vlee@freedesktop.org>
Tested-by: Aaron Watry <awatry@gmail.com>
(cherry picked from commit b0cf99165a)
This makes the check match up what we do on nv50 as well - there's no
point in switching over the push path if everything's in managed
buffers. This can happen when a shader uses a vertex without an enabled
array - we end up passing it a constant attribute.
This also has the effect of "fixing" some flickering in Talos. I have no
idea why. I've stared at the push logic forwards, backwards, and
sideways. By always forcing the push path (which is slow), the
flickering also goes away, but other rendering is still wrong
(specifically draw 383068 as identified in the bug). However by not
switching over to the push path, draw 383068 is correct.
Note that other flickering remains in Talos, like the red/green
walls/floors. This takes care of the shadow flickering though.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90513
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit 154c0a42a2)
If we have a loop, instructions before the tex might be added as tex
uses, and those may in fact dominate all other uses of the tex results.
This however doesn't mean that we don't need a texbar after the tex.
Only check if uses dominate each other they are dominated by the tex.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96565
Fixes: 7752bbc44 (gk104/ir: simplify and fool-proof texbar algorithm)
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit 1804aa0b80)
From the Cherryview's PRM, Volume 7, 3D Media GPGPU Engine, Register Region
Restrictions, page 844:
"When source or destination datatype is 64b or operation is integer DWord
multiply, indirect addressing must not be used."
v2:
- Fix it for Broxton too.
v3:
- Simplify code by using subscript() and not creating a new num_components
variable (Kenneth).
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95462
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit bdab572a86)
From the Cherryview PRM, Volume 7, 3D Media GPGPU Engine,
Register Region Restrictions:
"When source or destination is 64b (...), regioning in Align1
must follow these rules:
1. Source and destination horizontal stride must be aligned to
the same qword.
(...)"
v2:
- Fix it for Broxton too.
v3:
- Remove inst->regs_written change as it is not necessary (Ken)
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95462
Tested-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 0177dbb6c2)
We still need to recompile the passthrough shader when this value
changes, as it also affects the output vertex count. But otherwise,
we can eliminate recompiles on Gen8+.
We probably want to do this for Gen7 as well, but that requires
rewriting the input release code to use a loop, which is a trade-off
I'd need to consider in more detail.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit c319512e16)
Fixes three GL44-CTS.tessellation_shader subtests:
- max_patch_vertices
- single.max_patch_vertices
- tessellation_control_to_tessellation_evaluation.gl_PatchVerticesIn
These use gl_PatchVerticesIn in the TES, but don't link against a
TCS (which would allow the linker to lower it to a constant). We had
no handling for the system value in the backend, so it would just
assert fail.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 1bc194cd64)
i965 has no special hardware for this, so we need to pass this value in
as a uniform (unless the TES is linked against a TCS, in which case the
linker can just replace this with a constant).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 0be2105137)
We've had some trouble in the past with copying integers around via
float pointers, as the C compiler sometimes uses x87 floating point
registers to load values on 32-bit systems. Passing the
gl_constant_value union should be safer.
To avoid churn, this patch creates a "GLfloat *value" variable so
existing uses can stay the same.
Not observed to fix anything, but I was in the area adding more integer
state vars, and thought it'd be wise.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 8b408972ff)
When a shader image view into a buffer texture can be written to, the buffer's
valid range must be updated, or subsequent transfers may incorrectly skip
synchronization.
This fixes a bug that was exposed in Xephyr by PBO acceleration for glReadPixels,
reported by Michel Dänzer.
Cc: Michel Dänzer <michel.daenzer@amd.com>
Cc: 12.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit a64c7cd2ba)
Back-ported from commit a64c7cd2ba:
- include util/u_format.h
- code was extracted to si_set_shader_image in master, move it back
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
--
src/gallium/drivers/radeonsi/si_descriptors.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
This effectively limits registers to 32 and 64 for fermi and kepler when
1024 threads are used, but allows the full amount to be used with
smaller thread sizes.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit 1f895caba0)
The images struct is an uninitialized local variable on the stack. If the
callback returns 0, the struct might not have been updated and so should
be considered uninitialized. Currently the code ignores the return value,
which (depending on stack contents) might end up in reading a non-zero
value from images.image_mask and dereferencing further fields.
Another solution would be to initialize image_mask with 0, but checking
the return value seems more sensible and it is what Gallium is doing.
v2: fix typos in commit message,
fix indentation,
remove unnecessary parentheses and pointer dereference to keep line
length reasonable.
Cc: 11.2 12.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit e7ab358e81)
This replaces the current bash generator with a python based generator
using mako. It's quite fast and works with both python 2.7 and python
3.5, and should work with 3.3+ and maybe even 3.2.
It produces an almost identical file except for a minor layout changes,
and the addition of a "generated file, do not edit" warning.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 5a87bc7181)
This fixes a problem with the CE preamble and restoring only stuff in the
preamble when needed.
To illustrate suppose we have two graphics IB's 1 and 2, which are submitted in
that order. Furthermore suppose IB 1 does not use CE ram, but IB 2 does, and we
have a context switch at the start of IB 1, but not between IB 1 and IB 2.
The old code put the CE RAM loads in the preamble of IB 2. As the preamble of
IB 1 does not have the loads and the preamble of IB 2 does not get executed, the
old values are not load into CE RAM.
Fix this by always restoring the entire CE RAM.
v2: - Just load all descriptor set buffers instead of load and store the entire
CE RAM.
- Leave the ce_ram_dirty tracking in place for the non-preamble case.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Note: This commit differs from the one in master - 54f755fa0f
("radeonsi: Reinitialize all descriptors in CE preamble.")
Pulling DF uniforms from pull constant buffer generates messages like:
send(4) g12<1>DF g12<0,1,0>F
sampler ld SIMD4x2 Surface = 1 Sampler = 0 mlen 1 rlen 1
which produces GPU hangs in Cherryview/Braswell:
"For 64-bit Align1 operation or multiplication of dwords in CHV,
source horizontal stride must be aligned to qword."
This seems to be documented in the Cherryview PRM, Volume 7, Page 843:
"When source or destination datatype is 64b or operation is integer
DWord multiply, regioning in Align1 must follow these rules:
1. Source and Destination horizontal stride must be aligned to the
same qword."
We should set the destination type to UD, D, or F so that
the register stride checker doesn't notice. The destination type of
send messages is basically irrelevant anyway.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95462
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
(cherry picked from commit a0ed8503b7)
Pulling DF inputs from the URB generates messages like:
send(8) g23<1>DF g1<8,8,1>UD
urb 3 SIMD8 read mlen 1 rlen 2 { align1 1Q };
which makes the simulator angry:
"For 64-bit Align1 operation or multiplication of dwords in CHV,
source horizontal stride must be aligned to qword."
This seems to be documented in the Cherryview PRM, Volume 7, Page 823:
"When source or destination datatype is 64b or operation is integer
DWord multiply, regioning in Align1 must follow these rules:
1. Source and Destination horizontal stride must be aligned to the
same qword."
Setting the source horizontal stride to QWord is insane, as it's the
message header containing 8 URB handles in a single 32-bit DWord.
Instead, we should whack the destination type to UD, D, or F so that
the register stride checker doesn't notice. The destination type of
send messages is basically irrelevant anyway.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95462
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
(cherry picked from commit ed3ba651f6)
Cherryview/Broxton annoyingly have a minimum number of VS URB entries
of 34, which is not a multiple of 8. When the VS size is less than 9,
the number of VS entries has to be a multiple of 8.
Notably, BLORP programmed the minimum number of VS URB entries (34), with
a size of 1 (less than 9), which is invalid.
It seemed like this could be a problem in the regular URB code as well,
so I went ahead and updated that to be safe.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
(cherry picked from commit 9f37df06da)
Change MESA into Mesa in CL_PLATFORM_VERSION and CL_DEVICE_VERSION. For
both, always append git version suffix from git_sha1.h.
v5: move semicolon to same line as MESA_GIT_SHA1.
v4: drop #ifdef guards.
v3: add missing include.
v2: change CL_DEVICE_VERSION as well.
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
(cherry picked from commit 4825264f75)
Squashed with commit
clover: Include generated sources in AM_CPPFLAGS
git_sha1.c is generated in $(top_builddir)/src.
Fixes out-of-tree builds since 4825264f75.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96516
Signed-off-by: Aaron Watry <awatry@gmail.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit fafe026dbe)
ISTR having suggested this during review of the recent FP64 changes to
the SIMD lowering pass, but it doesn't look like it was taken into
account in the end. Using the fs_reg::component_size helper instead
of this open-coded variant makes sure that the stride is taken into
account correctly. Fixes at least the following piglit tests with
spilling forced on (since otherwise regs_written would be calculated
incorrectly and the spilling code would be rather confused about how
much data needs to be spilled):
spec.arb_gpu_shader_fp64.shader_storage.layout-std140-fp64-shader
spec.arb_gpu_shader_fp64.shader_storage.layout-std140-fp64-mixed-shader
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
(cherry picked from commit bd9f972651)
I haven't found any mention of this in the hardware docs, but
experimentally what seems to be going on is that when the per-thread
scratch slot size is changed between two pipelined draw calls, shader
invocations using the old and new scratch size setting may end up
being executed in parallel, causing their scratch offset calculations
to be based in a different partitioning of the scratch space, which
can cause their thread-local scratch space to overlap leading to
cross-thread scratch corruption.
I've been experimenting with alternative workarounds, like emitting a
PIPE_CONTROL with DC flush and CS stall between draw (or dispatch
compute) calls using different per-thread scratch allocation settings,
or avoiding reuse of the scratch BO if the per-thread scratch
allocation doesn't exactly match the original. Both seem to be as
effective as this workaround, but they have potential performance
implications, while this should be basically for free.
Fixes over 40 failures in our CI system with spilling forced on
(including CTS, dEQP and Piglit failures) on a number of different
platforms from Gen4 to Gen9. The 'glsl-max-varyings' piglit test
seems to be able to reproduce this bug consistently in the vertex
shader on at least Gen4, Gen8 and Gen9 with spilling forced on.
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit a84b5d43e2)
This will be used to find out what per-thread slot size a previously
allocated scratch BO was used with in order to fix a hardware race
condition without introducing additional stalls or memory allocations.
Instead of calling brw_get_scratch_bo() manually from the various
codegen functions, call a new helper function that keeps track of the
per-thread scratch size and conditionally allocates a larger scratch
BO.
v2: Handle BO allocation manually instead of relying on
brw_get_scratch_bo (Ken).
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit d960284e44)
The bitwise arithmetic trick used in brw_get_scratch_size() to clamp
the scratch allocation to 1KB has the unintended side effect that it
will cause us to allocate 2x the required amount of scratch space if
the original per-thread scratch size happened to be already a power of
two. Instead use the obvious MAX2 idiom to clamp the scratch
allocation to the expected range.
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 013ae4a70a)
In the Vulkan driver, we have the generation number (a compile time
constant) but not necessarily the brw_device_info struct. I meant
to rework the function to take a generation number instead of a
brw_device_info pointer to accomodate this. But I forgot, and left
it taking a brw_device_info pointer, while making Vulkan pass the
generation number (8, 9, ...) directly. This led to crashes.
Brown paper bag fix for commit 87d062a940.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96504
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 5a0d294d38)
Add guards to prevent dereferencing NULL dynamic pipeline state. Asserts
of pCreateInfo members are moved to the earliest points at which they
should not be NULL.
This fixes a segfault seen in the McNopper demo, VKTS_Example09.
v3 (Jason Ekstrand):
- Fix disabled rasterization check
- Revert opaque detection of color attachment usage
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit a4a5917248)
To reduce confusion, clarify that the state being copied is not dynamic.
This agrees with the Vulkan spec's usage of the term. Various sections
specify that the various pipeline state which have VkDynamicState enums
(e.g. viewport, scissor, etc.) may or may not be dynamic.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit a0d84a9ef9)
We already check that the address is not "too far", but we should also
clamp the UBO index in order to avoid looking at the wrong place in the
driver cb. This is a pretty rare situation though.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 7f257abc1b)
Removes the need to set LIBVA_DRIVER_NAME=gallium for supported targets and is
consistent with vdpau and general gallium drivers.
Note: some versions of libva can detect the gallium name and use the
backend. Although that behaviour seems inconsistent since it only works
for some platforms/backends.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 0c0f841e5d)
When building from a release tarball (where the generated/built files
are in srcdir) in an OOT fashion we need to have both builddir and
srcdir in the includes list.
Otherwise we'll error out, as the file (header gen_knobs.h in this case)
won't be in the location where we are looking.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Cc: Tim Rowley <timothy.o.rowley@intel.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit fcb5a75a66)
With earlier commit we've handled the `make distclean' out of tree
build, yet we failed to attribute that for in-tree builds the test
condition will return 1. Thus effectively the target will be considered
as "failed".
Fixes: b7f7ec7843 ("mesa: automake: distclean git_sha1.h when building
OOT")
Cc: <mesa-stable@lists.freedesktop.org>
Tested-by: Andy Furniss <adf.lists@gmail.com>
Reported-by: Andy Furniss <adf.lists@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 8229fe68b5)
We were programming the number of threads per subslice, when we should
have been programming the total number of threads on the GPU as a whole.
Thanks to Curro and Jordan for helping track this down!
On Skylake GT3e:
- Improves performance in Unreal's Elemental Demo by roughly 1.5-1.7x.
- Improves performance in Synmark's Gl43CSDof by roughly 3.7x.
- Improves performance in Synmark's Gl43GSCloth by roughly 1.18x.
On Broadwell GT2:
- Improves performance in Unreal's Elemental Demo by roughly 1.2-1.5x.
- Improves performance in Synmark's Gl43CSDof by roughly 2.0x.
- Improves performance in Synmark's Gl43GSCloth by 1.47035% +/-
0.255654% (n=25).
On Haswell GT3e:
- Improves performance in Unreal's Elemental Demo (in GL 4.3 mode)
by roughly 1.10x.
- Improves performance in Synmark's Gl43CSDof by roughly 1.18x.
- Decreases performance in Synmark's Gl43CSCloth by -1.99484% +/-
0.432771% (n=64).
On Ivybridge GT2:
- Improves performance in Unreal's Elemental Demo (in GL 4.2 mode)
by roughly 1.03x.
- Improves performance in Synmark's G/43CSDof by roughly 1.25x.
- No change in Synmark's Gl43CSCloth (n=28).
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
(cherry picked from commit 0fb85ac08d)
I don't know that anything actually guarantees this, but if we exceed
the limits, we may end up overflowing and trashing random buffers that
happen to be nearby in the VMA space, leading to rendering corruption,
hangs, or worse.
We should really fix this properly. However, the pitfall has existed
for ages, so for now we should at least detect it.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
(cherry picked from commit 1db37ebecf)
Most scratch stages use power of two sizes, in kilobytes, where
0 means 1kB. But compute shaders on Haswell have a minimum of 2kB,
and use a representation where 0 = 2kB.
This meant that we were effectively telling the hardware to allocate
each thread twice as much space as we meant to, while simultaneously
not allocating that much space in the buffer, leading to overflows.
Note that the existing code is completely wrong for Ivybridge,
but that will take additional work to sort out, so I've left it
as is for now. A subsequent commit will take care of that.
Together with the previous patches, this fixes rendering corruption
on Synmark's Gl43CSDof on Haswell.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
(cherry picked from commit 147a90d82a)
Curro figured this out by investigating the simulator. Apparently
there's also a workaround in the Windows driver. I'm not sure it's
actually documented anywhere.
We were underallocating the scratch buffer by a factor of 128/70.
v2: Rename threads_per_subslice to scratch_ids_per_subslice
(suggested by Jordan Justen).
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
(cherry picked from commit a7d029d3df)
We were allocating enough space for the number of threads per subslice,
when we should have been allocating space for the number of threads in
the entire GPU.
Even though we currently run with a reduced thread count (due to a bug),
we might still overflow the scratch buffer because the address
calculation is based on the FFTID, which can depend on exactly which
threads, EUs, and threads are executing. We need to allocate enough
for every possible thread that could run.
Fixes rendering corruption in Synmark's Gl43CSDof on Gen8+.
Earlier platforms need additional bug fixes.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
(cherry picked from commit 2213ffdb4b)
This was fixed in revision 47 of the ARB_dsa spec in Oct 22, 2015. Since
it's horrible to have differing APIs across library versions, we should
attempt to minimize the impact by backporting it as far as possible and
hope no one notices.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 7d7e015381)
This brings in the fixed glClearNamedFramebufferfi definition, as well
as a lot of GLsizei -> GLsizeiptr changes.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 92351a71a8)
>From OpenGL 4.0 spec, section 4.3.2 "Copying Pixels":
"The pixels corresponding to these buffers are copied from the source
rectangle bounded by the locations (srcX0, srcY 0) and (srcX1, srcY 1)
to the destination rectangle bounded by the locations (dstX0, dstY 0)
and (dstX1, dstY 1). The lower bounds of the rectangle are inclusive,
while the upper bounds are exclusive."
So, the rectangles sharing just an edge shouldn't overlap.
-----------
| |
------- ---
| | |
| | |
------- ---
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
(cherry picked from commit 466b320163)
>From OpenGL 4.0 spec, section 4.3.2 "Copying Pixels":
"The pixels corresponding to these buffers are copied from the source
rectangle bounded by the locations (srcX0, srcY 0) and (srcX1, srcY 1)
to the destination rectangle bounded by the locations (dstX0, dstY 0)
and (dstX1, dstY 1). The lower bounds of the rectangle are inclusive,
while the upper bounds are exclusive."
So, the rectangles sharing just an edge shouldn't overlap.
-----------
| |
------- ---
| | |
| | |
------- ---
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
(cherry picked from commit f8679badd4)
This reworks the #if guards a bit. When Emil originally wrote them, he
just guarded everything. However, part of what anv_entrypoints_gen.py
generates is a hash table for looking up entrypoints based on their name.
This table *cannot* get out of sync between C and python regardless of
preprocessor flags. In order to prevent this, this commit makes us use
void pointers in the dispatch table for those entrypoints which aren't
available. This means that the dispatch table size and entry order is
constant and it should never get out-of-sync with the python.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 8d37556ec9)
When an applications specifies mip levels _before_ setting a mipmap texture
filter, we will initially guess a single texture level. When the second level
image is created, we try to allocate the full texture -- however, we get the
base level size guess wrong if that size is odd. This leads to yet another
re-allocation of the texture later during st_finalize_texture.
Even worse, this re-allocation breaks a (reasonable) assumption made by
st_generate_mipmaps, because the re-allocation in the finalization call will
again allocate a single-level pipe texture (based on the non-mipmap texture
filter!). As a result, mipmap generation fails in interesting ways.
All of this can be avoided by just using the fact that we already know the
size of the base level.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95529
Cc: 12.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 42624ea837)
At this point, the limits are probably more-or-less correct. If there is
an invalid limit, that's a bug not a FINSHME.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit a1e69930e4)
This way the the bind map (which we're caching) is mostly independent of
the pipeline layout. The only coupling remaining is that we pull the array
size of a binding out of the layout. However, that size is also specified
in the shader and should always match so it's not really coupled. This
rendering issues in Dota 2.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit a1a25db699)
Since applications are allowed to specify some set of bindings which need
not be dense they also need not be in order. For most things, this doesn't
matter, but it could result getting the wrong dynamic offsets. This adds a
quick-and-dirty sort to ensure that everything is always in increasing
order of binding index.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit c13c5ac561)
With glx of gstreamer-vaapi, the temporary pixmap for front buffer gets
renewed in each frame, so when we receive a new pixmap, should get a new
front buffer for it.
This also fixes Totem player playback corruption.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 2ad443e4cc)
From original commit, the macro "if HAVE_DRI3" was in Makefile.sources,
this file is shared with SCons, SCons is not able to parse this marco,
the SCons build failed. Jose quickly gave two approaches and quick fix
with his second approach, thanks Jose for the solutions and fixes.
This patch is Jose's first approach, and it's more proper, because the
dri3 c file should not be included to build when DRI3 is not enabled.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 0ef8500aab)
GLX documentation states:
glXCreateNewContext can generate the following errors: (...)
GLXBadFBConfig if config is not a valid GLXFBConfig
Function checks if the given config is a valid config and sets proper
error code.
Fixes currently crashing glx-fbconfig-bad Piglit test.
v2: coding style cleanups (Emil, Topi)
use DefaultScreen macro (Emil)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: "11.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit cf804b4455)
When Kristian implemented GL_TEXTURE_EXTERNAL_OES, he hooked it up for gen8
but not for gen7 or earlier. It all works, we just need to emit the states
for the extra planes.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 037ce5d734)
When calling virgl_fence_wait() with timeout=0,
virgl_{drm,vtest}_resource_is_busy() is called. However, it returns TRUE
for a busy resource, whereace virgl_fence_wait() should return TRUE for
a completed (non-busy) resource.
This fixes running supertuxkart in a VM (I could not reproduce locally
with vtest though there is a similar fix)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: "11.1 11.2 12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit dc81b3ad43)
The width0/height0/depth0 on stObj may not have been set at this point.
Observed in a trace that set up levels 2..9 of a 2d texture, and set the base
level to 2, with height 1. This made the guess logic always bail.
Originally investigated by Ilia Mirkin, this patch gets rid of the somewhat
redundant storage of width0/height0/depth0 and makes sure we always compute
pipe texture sizes that are compatible with the base level image of the
GL texture.
Fixes the gl-1.2-texture-base-level piglit test provided by Brian Paul.
v2:
- try to re-use an existing pipe texture when possible
- handle a corner case where the base level is not level 0 and it is of
size 1x1x1
v3:
- ptHeight = ptWidth in cube map 1x1 case (suggested by Brian)
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit bd5c41fe5f)
We were previously unconditionally doing this for arrays and ubo's, and
ignoring texture/storage/atomic buffers. Instead use the usage history
to determine which atoms need to be revalidated.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 6e6fd911da)
R9G9B9E5 is the only uncompressed one hopefully.
This fixes incorrect rendering not discovered (due to a lack of tests)
until DCC mipmapping was enabled.
Cc: 11.1 11.2 12.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
(cherry picked from commit d4d733e39d)
A texture may be redefined with _NEW_TEXTURE, which might have been
bound to a shader image slot. We have to revalidate the image atoms to
pick up on the new resource.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit c81b090c92)
Sometimes a register source can actually be double- or even quad-wide.
We must make sure that the inserted texbars take that width into
account.
Based on an earlier patch by Samuel Pitoiset.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Cc: "12.0 11.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 71ad8a173f)
Like floats, we should use the round toward 0 mode instead of the
nearest one (which is the default) for doubles to integers.
This fixes all arb_gpu_shader_fp64 piglits which convert doubles to
integers (16 tests).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 08ddfe7b2f)
The GL4.5 spec quote seems clear on this:
"The value -1 will be returned by either command if an error occurs,
if name does not identify an active variable on programInterface,
or if name identifies an active variable that does not have a valid
location assigned, as described above."
This fixes:
GL45-CTS.program_interface_query.output-built-in
[airlied: use _mesa_program_resource_location_index as
suggested by Eduardo]
Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 07403014c3)
When we are not packing a double input varying, we might need to
read its data in a non-aligned to 64-bit offset, so we read
the wrong data. This is happening when using explicit locations
in varyings because Mesa disables packing varying for that case.
const_index is in 32-bit size units but offset() is multiplying
it by destination type size units. When operating with double
input varyings, const_index value could be not aligned to 64 bits.
To fix it, we load the double vector as if it was a float based vector
with twice the number of components.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 2d6f82a294)
Data starts at suboffet 3 in 32-bit units (12 bytes), so it is not
64-bit aligned and the current implementation fails to read the data
properly. Instead, when there is is a double input varying, read it as
vector of floats with twice the number of components.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit cb30727648)
From GLSL 4.5 spec, "4.4.2.3 Geometry Outputs".
"all geometry shader output vertex count declarations in a
program must declare the same count."
Fixes:
GL45-CTS.geometry_shader.output.conflicted_output_vertices_max
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 4c86399378)
For 3D textures we shouldn't be using NumLayers, we need
to get it from the depth.
This fixes:
GL45-CTS.geometry_shader.layered_framebuffer.clear_call_support
Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit ff2e569153)
With tessellation shaders we can have cases where we have
arrays of anon structs, so make sure we match using without_array().
Fixes:
GL45-CTS.tessellation_shader.tessellation_control_to_tessellation_evaluation.gl_in
v2:
test lengths match as well (Ilia)
v3:
descend array lengths to check for matches as well (Ilia)
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 1f66a4b689)
This fixes a crash in
GL43-CTS.shader_subroutine.subroutines_not_allowed_as_variables_constructors_and_argument_or_return_types
If we can't find the func_name in one of these paths,
we have emitted an earlier error so just return here.
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 6702c15810)
GL43-CTS.compute_shader.work-group-size does
uniform uint g_uniform[gl_WorkGroupSize.z + 20] = { 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24 };
The initializer triggers the GLSL 4.30/GLES3 tests
for constant sequence subexpressions, so it doesn't
happen unless you are using those, so just return
false as this path is now reachable.
v2: update commit msg with diagnosis
Acked-by: Timothy Arceri <timothy.arceri@collabora.com>
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 4336196b7f)
Images invalidation is a bit weird on Fermi and there is already a hack
which forces invalidating all images when launching a computer shader
to help in fixing 3D<->CP interaction.
However, we need to re-validate images for compute because
nvc0_compute_invalidate_surfaces() will destroy the previous binding.
This is not really good for performance purposes but this might be
improved later.
This fixes the following piglits:
- spec/arb_compute_shader/execution/basic-uniform-access
- spec/arb_compute_shader/execution/mutiple-texture-reading
- spec/arb_compute_shader/execution/multiple-workgroups
- spec/glsl-4.30/execution/built-in-functions/cs-* (207 tests)
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 43d3ecfb33)
We would revalidate images when anything was touched at all. Which is
unfortunate, since the state tracker does not use CSO's to reduce the
workload. So instead implement a protocol to ensure that something has
changed before revalidating all the images.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit fd6bbc2ee2)
We would revalidate buffers when anything was touched at all. Which is
unfortunate, since the state tracker does not use CSO's to reduce the
workload. So instead implement a protocol to ensure that something has
changed before revalidating all the SSBOs.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 0f673db6f0)
When upscaling you can end up interpolating between the edge pixel and one
past the edge. Using CLAMP_TO_EDGE seems like the most reasonable thing to
do in this case. This fixes two of the new Vulkan CTS tests in
dEQP-VK.api.copy_and_blit.blit_image.*
Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 441194edd9)
Getting rid of the default case makes the compiler warn if we are missing
cases. While we're here, we also add the one missing case.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 526a8de22d)
glslang frequently throw bogus decorations into shaders. While we are free
to assert-fail, it's a bit nicer to the application to just warn.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 62c6e94bd6)
Previously we supported a subset of capabilities and just left a default
case for the others. It's time to stop being lazy and actually audit the
capabilities. This should bring them up-to-date with reality.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 5a1e56f344)
This is more accurate than calling
_mesa_active_fragment_shader_has_side_effects because it looks at whether
or not the SSBOs, images, or atomic buffers are actually written rather
than just existing in the program.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 3fb289f957)
This reverts commit c1107cec44.
Apparently the hardware spec text I quoted in the commit message was
outright lying about scalar source math being supported on SNB, the
hardware seems to load 32 contiguous bits of data for each channel
regardless of the regioning mode. Fixes regressions in the following
CTS tests (which we didn't catch early due to CTS being temporarily
disabled in our CI system):
es2-cts.gtf.gl.atan.atan_vec3_frag_xvary
es2-cts.gtf.gl.cos.cos_vec2_frag_xvary
es2-cts.gtf.gl.atan.atan_vec2_frag_xvary
es2-cts.gtf.gl.pow.pow_vec2_frag_xvary_yconsthalf
es2-cts.gtf.gl.cos.cos_float_frag_xvary
es2-cts.gtf.gl.pow.pow_float_frag_xvary_yconsthalf
es2-cts.gtf.gl.atan.atan_vec3_frag_xvaryyvary
es2-cts.gtf.gl.pow.pow_vec3_frag_xvary_yconsthalf
es2-cts.gtf.gl.cos.cos_vec3_frag_xvary
es2-cts.gtf.gl.atan.atan_vec2_frag_xvaryyvary
Cc: mesa-stable@lists.freedesktop.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96346
Reported-by: Mark Janes <mark.a.janes@intel.com>
Acked-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 7244dc1e06)
The conditional mod of these instructions determines the semantics of
the comparison itself (rather than being evaluated based on the result
of the instruction as is usually the case for most other instructions
that allow conditional mods), so it's in general not legal to
propagate a conditional mod into a CMP instruction. This prevents
cmod propagation from (mis)optimizing:
cmp.z.f0 tmp, ...
mov.z.f0 null, tmp
into:
cmp.z.f0 tmp, ...
which gives the negation of the flag result of the original sequence.
I originally noticed this while working on SIMD32 in the scalar
back-end, but the same scenario is likely to be possible in vec4
programs so this commit ports the bugfix with the same name from the
scalar back-end to the vec4 cmod propagation pass.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit a2135c6fd9)
Skipping the temporary allocation and copy instructions is easy (just
return dst), but the conditions used to find out whether the copy can
be optimized out safely without breaking the program are rather
complex: The destination must be exactly one component of at most the
execution width of the lowered instruction, and all source regions of
the instruction must be either fully disjoint from the destination or
be aligned with it group by group.
v2: Don't handle partial source-destination overlap for simplicity
(Jason). No instruction count regressions with respect to v1 in
either shader-db or the few FP64 shader_runner test-cases with
partial overlap I've checked manually.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 7aa76d66a1)
The specs says INVALID_VALUE for exceeding dimensions,
which is really what is happening here.
This fixes:
GL45-CTS.copy_image.non_existent_mipmap
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Antia Puentes <apuentes@igalia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit af7bf610cf)
This test was only happening for textures, but there is
nothing in the spec to say this, so test it for all cases.
This fixes:
GL45-CTS.copy_image.invalid_target
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit c0856eacf1)
These two lines have been here since the file was created.
I'm guessing the second one was just for testing during dev, so it's the
one that's going away.
CoverityID: 1296205
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 17f4c723eb)
In the case of out-of-tree (OOT) builds, in particular when building
from tarball, we'll end up with the file in both srcdir and builddir.
We want the former to remain intact (since we need it on rebuild) while
the latter should be removed otherwise `make distclean' gets angry at
us.
Ideally there'll be a solution that feels a bit less of a hack. Until
then this does the job exactly as expected.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit b7f7ec7843)
... when copied from git_sha1.h.
As the latter file can we lacking the write attribute, one should set it
explicitly. Otherwise we'll get a warning/failure at cleanup stage.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 2c424e00c3)
Otherwise the build will assume that we've talking about builddir, which
is not the case in the else statement.
Here the file is already generated and is part of the tarball.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 359d9dfec3)
With earlier commit we introduced support for render_node devices, which
was couples with the use of the image loader extension.
As the work was inspired by egl/wayland we (erroneously) added the
extension for the !render_node path as well.
That works for wayland, as the implementations of the DRI2 and IMAGE
loader extensions converge behind the scenes. As that is not yet
the case for Android we shouldn't expose the extension.
Fixes: 34ddef39ce ("egl: android: add dma-buf fd support")
Cc: <mesa-stable@lists.freedesktop.org>
Reported-by: Mauro Rossi <issor.oruam@gmail.com>
Tested-by: Mauro Rossi <issor.oruam@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 1816c837c1)
The generated sources should follow the example set by the vulkan
headers and our non-generated code. Namely: the code for all supported
platforms should be available, each one guarded by its respective
VK_USE_PLATFORM_*_KHR macro.
v2: Reword commit message.
Cc: Mark Janes <mark.a.janes@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96285
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> (v1 over IRC)
(cherry picked from commit b8e1f59d62)
isl library is needed to build i965, libmesa_isl static library is added
to fix related Android building errors.
Any attempt to build libmesa_genxml as phony package module failed to deliver
gen{7,75,8,9}_pack.h generated headers, needed for libmesa_isl_gen{7,75,8,9}
Due to constraints in Android Build System, libmesa_genxml is built as static,
at least one source is needed, so dummy.c is autogenerated for this scope,
libmesa_genxml dependency is declared using LOCAL_WHOLE_STATIC_LIBRARIES,
to avoid building errors due to missing genxml/gen{7,75,8,9}_pack.h headers.
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 278c2212ac)
Fixes the following building error:
target C++: libmesa_glsl <= external/mesa/src/compiler/glsl/glsl_to_nir.cpp
In file included from external/mesa/src/compiler/glsl/glsl_to_nir.h:28:0,
from external/mesa/src/compiler/glsl/glsl_to_nir.cpp:28:
external/mesa/src/compiler/nir/nir.h:42:25: fatal error: nir_opcodes.h: No such file or directory
compilation terminated.
build/core/binary.mk:432: recipe for target 'out/target/product/x86/obj/STATIC_LIBRARIES/libmesa_glsl_intermediates/glsl/glsl_to_nir.o' failed
make: *** [out/target/product/x86/obj/STATIC_LIBRARIES/libmesa_glsl_intermediates/glsl/glsl_to_nir.o] Error 1
make: *** Waiting for unfinished jobs....
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 4143245c23)
Including the file in both ISL_FILES and ISL_GENERATED_FILES makes
the actual dependency list less obvious.
v2: Drop unrelated vulkan hunk (Jason).
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit af1a0ae8ce)
With earlier commit 3689ef32af ("automake: rework the git_sha1.h rule,
include in tarball") we/I erroneously removed the PHONY rule and the
temporary file.
The former is used to ensure that the header is regenerated when on each
make invocation, while the latter helps us avoid the unneeded rebuild(s)
when the SHA1 hasn't changed.
Reported-by: Grazvydas Ignotas <notasas@gmail.com>
Tested-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit af2637aa32)
The old method pushed data for each channels uvec3 data of
gl_LocalInvocationID.
The new method pushes 1 dword of data that is a 'thread local ID'
value. Based on that value, we can generate gl_LocalInvocationIndex
and gl_LocalInvocationID with some calculations.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 0a3acff5b5)
The cross thread constant support appears on Haswell. It allows us to
upload a set of uniform data for all threads without duplicating it
per thread.
One complication is that cross-thread constants are loaded into
registers before per-thread constants. Previously, our local IDs were
loaded before the uniform data and treated as 'payload' data, even
though they were actually pushed into the registers like the other
uniform data.
Therefore, in this patch we simultaneously enable a newer layout where
each thread now uses a single uniform slot for a unique local ID for
the thread. This uniform is handled specially to make sure it is added
last into the uniform push constant registers. This minimizes our
usage of push constant registers, and maximizes our ability to use
cross-thread constants for registers.
To swap from the old to the new layout, we also need to flip some
lowering pass switches to let our driver handle the lowering instead.
We also no longer force thread_local_id_index to -1.
v4:
* Minimize size of patch that switches from the old local ID layout
to the new layout (Jason)
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit b1f22c6317)
The cross thread constant support appears on Haswell. It allows us to
upload a set of uniform data for all threads without duplicating it
per thread.
We also support per-thread data which allows us to store a per-thread
ID in one of the uniforms that can be used to calculate the
gl_LocalInvocationIndex and gl_LocalInvocationID variables.
v4:
* Support the old local ID push constant layout as well (Jason)
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 3ba9594f32)
The cross thread constant support appears on Haswell. It allows us to
upload a set of uniform data for all threads without duplicating it
per thread.
We also support per-thread data which allows us to store a per-thread
ID in one of the uniforms that can be used to calculate the
gl_LocalInvocationIndex and gl_LocalInvocationID variables.
v4:
* Support the old local ID push constant layout as well (Jason)
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 30685392e0)
We need information about push constants in a few places for the GL
driver, and another couple places for the vulkan driver.
When we add support for uploading both a common (cross-thread) set of
push constants, combined with the previous per-thread push constant
data, things are going to get even more complicated. To simplify
things, we add push constant info into the cs prog_data struct.
The cross-thread constant support is added as of Haswell. To support
it we need to make sure all push constants with uniform values are
added to earlier registers. The register that varies per thread and
holds the thread invocation's unique local ID needs to be added last.
For now we add the code that would calculate cross-thread constatn
information for hsw+, but we force it (cross_thread_supported) off
until the other parts of the driver support it.
v4:
* Support older local ID push constant layout as well. (Jason)
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit d437798ace)
We add a lowering pass for nir intrinsics. This pass can replace nir
intrinsics with driver specific nir lower code.
We lower the gl_LocalInvocationIndex intrinsic based on a uniform
which is loaded with a thread specific ID.
We also lower the gl_LocalInvocationID based on
gl_LocalInvocationIndex.
v2:
* Create variable during lowering pass. (Ken)
v3:
* Don't create a variable, but instead just insert an intrisic call
to load a uniform from the allocated location. (Jason)
v4:
* Don't run this pass if thread_local_id_index < 0
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 3ef0957dac)
This thread ID uniform will be used to compute the
gl_LocalInvocationIndex and gl_LocalInvocationID values.
It is important for this uniform to be added in the last push constant
register. fs_visitor::assign_constant_locations is updated to make
sure this happens.
The reason this is important is that the cross-thread push constant
registers are loaded first, and the per-thread push constant registers
are loaded after that. (Broadwell adds another push constant upload
mechanism which reverses this order, but we are ignoring this for
now.)
v2:
* Add variable in intrinsics lowering pass
* Make sure the ID is pushed last in assign_constant_locations, and
that we save a spot for the ID in the push constants
v3:
* Simplify code based with Jason's suggestions.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 04fc72501a)
v4:
* Force thread_local_id_index to -1 for now, and have
fs_visitor::setup_cs_payload look at thread_local_id_index. This
enables us to more easily cut over from the old local ID layout to
the new layout, as suggested by Jason.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit fa279dfbf0)
Isolines aren't reversed. commit 5b2d8c2273 fixed this for the vec4
TES backend, but not the scalar one.
Found while debugging GL45-CTS.tessellation_shader.
tessellation_control_to_tessellation_evaluation.gl_tessLevel.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 25e1b8d366)
The string "[0]\0" is the same as "[0]" as far as the C string datatype
is concerned. That string has length 3. strncmp(s, length_3_string, 4)
is the same as strcmp(s, length_3_string), so make it be strcmp.
v2: Not the same as strncmp(..., 3). Noticed by Ilia.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 049bb94d2e)
With the introduction of fp64 and fp16 to nir, there are now a bunch of
float types running around. A F1 2015 shader ends up with an i2f.sat
operation, which has a nir_type_float32 destination. Allow sat on all
the float destination types.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit ca135a2612)
The initial ARB_sampler_objects spec had GL_INVALID_VALUE in it,
however version 8 of it fixed this, and the GL specs also have
the fixed value in them.
Fixes:
GL45-CTS.texture_border_clamp.samplerparameteri_non_gen_sampler_error
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "12.0 11.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 6400144041)
Fixes rendering in Shadow of Mordor with rbc. Application writes
RGBA_UNORM texture filling it with values the application wants to
later on treat as SRGB_ALPHA.
Intel driver enables lossless compression for the buffer by the time
of writing. However, the driver fails to make sure the buffer can be
sampled as something else later on and unfortunately there is
restriction in the hardware for using lossless compression for srgb
formats which looks to extend itself to the sampling engine also.
Requesting srgb to linear conversion on top of compressed buffer
results the color values to be pretty much garbage.
Fortunately none of tracked benchmarks showed a regression with
this.
v2 (Matt): Add missing space
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 30e9e6bd07)
We weren't setting up several of the uniform values for the patch
header, so we'd crash when uploading push constants. We at least
need to initialize them to zero. We also had the isoline parameters
reversed, so it would also render incorrectly (if it didn't crash).
Fixes a new Piglit test(*) (isoline-no-tcs), as well as crashes in
GL44-CTS.tessellation_shader.single.max_patch_vertices.
(*) https://lists.freedesktop.org/archives/piglit/2016-May/019866.html
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit a3dc99f3d4)
The driver was adding the skip components but always for buffer 0.
This fixes:
GL45-CTS.gtf40.GL3Tests.transform_feedback3.transform_feedback3_skip_multiple_buffers
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0 11.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit ebb81cd683)
e2791b38b4
mesa/program_interface_query: fix transform feedback varyings.
caused a regression in
GL45-CTS.gtf40.GL3Tests.transform_feedback3.transform_feedback3_multiple_streams
on radeonsi.
The problem was it was using the skip components varying to set
the stream id, when it should wait until a varying was written,
this just adds the varying checks in the right place.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 1fe7bbb911)
According to GL4.5 spec:
An INVALID_OPERATION error is generated if any part of the speci-
fied buffer range is mapped with MapBufferRange or MapBuffer (see sec-
tion 6.3), unless it was mapped with MAP_PERSISTENT_BIT set in the Map-
BufferRange access flags.
So we should use the if range is mapped path.
This fixes:
GL45-CTS.buffer_storage.map_persistent_buffer_sub_data
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Cc: "12.0, 11.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit e891f7cf55)
This really only hits for bitsets with a size of a multiple of 32. We
can end up with pos = -1 as a result of the ffs, which we in turn decide
is a valid position (since we fall through the loop and i == 1, we end
up adding 32 to it, so end up returning 31 again).
Up until recently this was largely unreachable, as the register file
sizes were all 63 or 255. However with the advent of compute shaders
which can restrict the number of registers, this can now happen.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 18d11c9989)
This reverts commit aac90ba292.
The commit caused a regression in:
piglit.spec.glsl-1_50.compiler.gs-input-nonarray-named-block.geom
Also the CTS test it was meant to fix seems like it may be bogus.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 98d40b4d11)
I haven't found any evidence that this isn't supported by the
hardware, in fact according to the SNB hardware spec:
"The supported regioning modes for math instructions are align16,
align1 with the following restrictions:
- Scalar source is supported.
[...]
- Source and destination offset must be the same, except the case of
scalar source."
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit c1107cec44)
This is the case for SNB math instructions so we need to be careful
and insert the literal value of the immediate into the table (rather
than its absolute value) if the instruction is unable to invert the
sign of the constant on the fly.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 06d8765bc0)
Which requires using a bitset instead of a boolean flag to keep track
of the GRFs we've seen a generating instruction for already. The
search loop continues until all instructions initializing the value of
the source VGRF have been found, or it is determined that coalescing
is not possible.
Fixes a few piglit test cases on Gen4-6 which were regressed by
6956015aa5 due to the different (yet
perfectly valid) ordering in which copy instructions are emitted now
by the simd lowering pass, which had the side effect of causing this
optimization pass to start corrupting the program in cases where a
VGRF-to-MRF copy instruction would be eliminated but only the last
instruction writing to the source VGRF region would be rewritten to
point to the target MRF.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 4fe4f6e8a7)
This will be required to correctly transform the destination of 8-wide
instructions that write a single GRF of a VGRF to MRF copy marked
COMPR4.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 1898673f58)
This will allow compute_to_mrf to handle cases where the source of the
VGRF-to-MRF copy is initialized by more than one instruction. In such
cases we cannot rewrite the destination of any of the generating
instructions until it's known whether the whole VGRF source region can
be coalesced into the destination MRF, which will imply continuing the
search until all generating instructions have been found or it has
been determined that the VGRF and MRF registers cannot be coalesced.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 485fbaff03)
Compute-to-mrf was checking whether the destination of scan_inst is
more than one component (making assumptions about the instruction data
type) in order to find out whether the result is being fully copied
into the MRF destination, which is rather inaccurate in cases where a
single-component instruction is only partially contained in the source
region, or when the execution size of the copy and scan_inst
instructions differ. Instead check whether the destination region of
the instruction is really contained within the bounds of the source
region of the copy.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 4b0ec9f475)
Compute-to-mrf was being rather heavy-handed about checking whether
instruction source or destination regions interfere with the copy
instruction, which could conceivably lead to program miscompilation.
Fix it by using regions_overlap() instead of the open-coded and
dubiously correct overlap checks.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit bb61e24787)
Now there are not files that require python 3, so for now just remove
the python 3 dependency and use python 2. I think the right plan is to
just get all of the python ready for python 3, and then use whatever
python is available.
Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
cc: 12.0 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 604010a7ed)
The CTS test:
GL45-CTS.multi_bind.dispatch_bind_image_textures
binds 192 image uniforms, we reject this later,
but not until after we trash the contents of the
struct gl_shader.
Error now reads:
Too many compute shader image uniforms (192 > 16)
instead of
Too many compute shader image uniforms (2745344416 > 16)
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit f87352d769)
# Appveyor defaults core.autocrlf to input instead of the default (true), but
# that can hide problems processing CRLF text on Windows
- git config --global core.autocrlf true
os:Visual Studio 2013
environment:
WINFLEXBISON_VERSION:2.5.15
LLVM_ARCHIVE:llvm-5.0.1-msvc2017-mtd.7z
WINFLEXBISON_ARCHIVE:win_flex_bison-2.4.5.zip
LLVM_ARCHIVE:llvm-3.3.1-msvc2013-mtd.7z
install:
# Check git config
- git config core.autocrlf
# Check pip
- python --version
- python -m pip --version
# Install Mako
- python -m pip install Mako==1.0.7
- python -m pip install --egg Mako
# Install pywin32 extensions, needed by SCons
- python -m pip install pypiwin32
# Install python wheels, necessary to install SCons via pip
- python -m pip install wheel
# Install SCons
- python -m pip install scons==3.0.1
- python -m pip install --egg scons==2.4.1
- scons --version
# Install flex/bison
- set WINFLEXBISON_ARCHIVE=win_flex_bison-%WINFLEXBISON_VERSION%.zip
- if not exist "%WINFLEXBISON_ARCHIVE%" appveyor DownloadFile "https://github.com/lexxmark/winflexbison/releases/download/v%WINFLEXBISON_VERSION%/%WINFLEXBISON_ARCHIVE%"
- if not exist "%WINFLEXBISON_ARCHIVE%" appveyor DownloadFile "https://downloads.sourceforge.net/project/winflexbison/old_versions/%WINFLEXBISON_ARCHIVE%"
- 7z x -y -owinflexbison\ "%WINFLEXBISON_ARCHIVE%" > nul
GLw (OpenGL widget library) is now available from a separate <ahref="https://gitlab.freedesktop.org/mesa/glw">git repository</a>. Unless you're using very old Xt/Motif applications with OpenGL, you shouldn't need it.
GLw (OpenGL widget library) is now available from a separate <ahref="http://cgit.freedesktop.org/mesa/glw/">git repository</a>. Unless you're using very old Xt/Motif applications with OpenGL, you shouldn't need it.
</p>
<h2>2.5 What's the proper place for the libraries and headers?</h2>
<ahref="relnotes/19.1.4.html">Mesa 19.1.4</a> is released.
This is a bug-fix release.
</p>
<h2>July 23, 2019</h2>
<p>
<ahref="relnotes/19.1.3.html">Mesa 19.1.3</a> is released.
This is a bug-fix release.
</p>
<h2>July 9, 2019</h2>
<p>
<ahref="relnotes/19.1.2.html">Mesa 19.1.2</a> is released.
This is a bug-fix release.
</p>
<h2>June 26, 2019</h2>
<p>
<ahref="relnotes/19.0.8.html">Mesa 19.0.8</a> is released.
This is an emergency bug fix release. Users of 19.0.7 should updated to 19.0.8
or 19.1.1 immediately.
</p>
<h2>June 25, 2019</h2>
<p>
<ahref="relnotes/19.1.1.html">Mesa 19.1.1</a> is released.
This is a bug-fix release.
</p>
<h2>June 24, 2019</h2>
<p>
<ahref="relnotes/19.0.7.html">Mesa 19.0.7</a> is released.
This is a bug-fix release.
</p>
<p>
NOTE: It is anticipated that 19.0.7 will be the final release in the
19.0 series. Users of 19.0 are encouraged to migrate to the 19.1
series in order to obtain future fixes.
</p>
<h2>June 11, 2019</h2>
<p>
<ahref="relnotes/19.1.0.html">Mesa 19.1.0</a> is released.
This is a new development release. See the release notes for more
information about this release
</p>
<h2>June 5, 2019</h2>
<p>
<ahref="relnotes/19.0.6.html">Mesa 19.0.6</a> is released.
This is a bug-fix release.
</p>
<h2>May 21, 2019</h2>
<p>
<ahref="relnotes/19.0.5.html">Mesa 19.0.5</a> is released.
This is a bug-fix release.
</p>
<h2>May 9, 2019</h2>
<p>
<ahref="relnotes/19.0.4.html">Mesa 19.0.4</a> is released.
This is a bug-fix release.
</p>
<h2>April 24, 2019</h2>
<p>
<ahref="relnotes/19.0.3.html">Mesa 19.0.3</a> is released.
This is a bug-fix release.
</p>
<h2>April 10, 2019</h2>
<p>
<ahref="relnotes/19.0.2.html">Mesa 19.0.2</a> is released.
This is a bug-fix release.
</p>
<h2>April 5, 2019</h2>
<p>
<ahref="relnotes/18.3.6.html">Mesa 18.3.6</a> is released.
This is a bug-fix release.
</p>
<p>
NOTE: It is anticipated that 18.3.6 will be the final release in the
18.3 series. Users of 18.3 are encouraged to migrate to the 19.0
series in order to obtain future fixes.
</p>
<h2>March 27, 2019</h2>
<p>
<ahref="relnotes/19.0.1.html">Mesa 19.0.1</a> is released.
This is a bug-fix release.
</p>
<h2>March 18, 2019</h2>
<p>
<ahref="relnotes/18.3.5.html">Mesa 18.3.5</a> is released.
This is a bug-fix release.
</p>
<h2>March 13, 2019</h2>
<p>
<ahref="relnotes/19.0.0.html">Mesa 19.0.0</a> is released.
This is a new development release. See the release notes for more
information about this release
</p>
<h2>February 18, 2019</h2>
<p>
<ahref="relnotes/18.3.4.html">Mesa 18.3.4</a> is released.
This is a bug-fix release.
</p>
<h2>January 31, 2019</h2>
<p>
<ahref="relnotes/18.3.3.html">Mesa 18.3.3</a> is released.
This is a bug-fix release.
</p>
<h2>January 17, 2019</h2>
<p>
<ahref="relnotes/18.3.2.html">Mesa 18.3.2</a> is released.
This is a bug-fix release.
</p>
<h2>December 27, 2018</h2>
<p>
<ahref="relnotes/18.2.8.html">Mesa 18.2.8</a> is released.
This is a bug-fix release.
</p>
<p>
NOTE: It is anticipated that 18.2.8 will be the final release in the
18.2 series. Users of 18.2 are encouraged to migrate to the 18.3
series in order to obtain future fixes.
</p>
<h2>December 13, 2018</h2>
<p>
<ahref="relnotes/18.2.7.html">Mesa 18.2.7</a> is released.
This is a bug-fix release.
</p>
<h2>December 11, 2018</h2>
<p>
<ahref="relnotes/18.3.1.html">Mesa 18.3.1</a> is released.
This is a bug-fix release.
</p>
<h2>December 7, 2018</h2>
<p>
<ahref="relnotes/18.3.0.html">Mesa 18.3.0</a> is released. This is a
new development release. See the release notes for more information
about the release.
</p>
<h2>November 28, 2018</h2>
<p>
<ahref="relnotes/18.2.6.html">Mesa 18.2.6</a> is released.
This is a bug-fix release.
</p>
<h2>November 15, 2018</h2>
<p>
<ahref="relnotes/18.2.5.html">Mesa 18.2.5</a> is released.
This is a bug-fix release.
</p>
<h2>October 31, 2018</h2>
<p>
<ahref="relnotes/18.2.4.html">Mesa 18.2.4</a> is released.
This is a bug-fix release.
</p>
<h2>October 19, 2018</h2>
<p>
<ahref="relnotes/18.2.3.html">Mesa 18.2.3</a> is released.
This is a bug-fix release.
</p>
<h2>October 5, 2018</h2>
<p>
<ahref="relnotes/18.2.2.html">Mesa 18.2.2</a> is released.
This is a bug-fix release.
</p>
<h2>September 24, 2018</h2>
<p>
<ahref="relnotes/18.1.9.html">Mesa 18.1.9</a> is released.
This is a bug-fix release.
</p>
<p>
NOTE: It is anticipated that 18.1.9 will be the final release in the
18.1 series. Users of 18.1 are encouraged to migrate to the 18.2
series in order to obtain future fixes.
</p>
<h2>September 21, 2018</h2>
<p>
<ahref="relnotes/18.2.1.html">Mesa 18.2.1</a> is released.
This is a bug-fix release.
</p>
<h2>September 7, 2018</h2>
<p>
<ahref="relnotes/18.1.8.html">Mesa 18.1.8</a> and
<ahref="relnotes/18.2.0.html">Mesa 18.2.0</a> are released.
These are, respectively, a bug-fix release from the 18.1 branch and a
new development release. See the release notes for more information
about the releases.
</p>
<h2>August 24, 2018</h2>
<p>
<ahref="relnotes/18.1.7.html">Mesa 18.1.7</a> is released.
This is a bug-fix release.
</p>
<h2>August 13, 2018</h2>
<p>
<ahref="relnotes/18.1.6.html">Mesa 18.1.6</a> is released.
This is a bug-fix release.
</p>
<h2>July 27, 2018</h2>
<p>
<ahref="relnotes/18.1.5.html">Mesa 18.1.5</a> is released.
This is a bug-fix release.
</p>
<h2>July 13, 2018</h2>
<p>
<ahref="relnotes/18.1.4.html">Mesa 18.1.4</a> is released.
This is a bug-fix release.
</p>
<h2>June 29, 2018</h2>
<p>
<ahref="relnotes/18.1.3.html">Mesa 18.1.3</a> is released.
This is a bug-fix release.
</p>
<h2>June 15, 2018</h2>
<p>
<ahref="relnotes/18.1.2.html">Mesa 18.1.2</a> is released.
This is a bug-fix release.
</p>
<h2>June 3, 2018</h2>
<p>
<ahref="relnotes/18.0.5.html">Mesa 18.0.5</a> is released.
This is a bug-fix release.
</p>
<p>
NOTE: It is anticipated that 18.0.5 will be the final release in the
18.0 series. Users of 18.0 are encouraged to migrate to the 18.1
series in order to obtain future fixes.
</p>
<h2>June 1, 2018</h2>
<p>
<ahref="relnotes/18.1.1.html">Mesa 18.1.1</a> is released.
This is a bug-fix release.
</p>
<h2>May 18, 2018</h2>
<p>
<ahref="relnotes/18.1.0.html">Mesa 18.1.0</a> is released. This is a
new development release. See the release notes for more information
about the release.
</p>
<h2>May 17, 2018</h2>
<p>
<ahref="relnotes/18.0.4.html">Mesa 18.0.4</a> is released.
This is a bug-fix release.
</p>
<h2>May 7, 2018</h2>
<p>
<ahref="relnotes/18.0.3.html">Mesa 18.0.3</a> is released.
This is a bug-fix release.
</p>
<h2>April 28, 2018</h2>
<p>
<ahref="relnotes/18.0.2.html">Mesa 18.0.2</a> is released.
This is a bug-fix release.
</p>
<h2>April 18, 2018</h2>
<p>
<ahref="relnotes/18.0.1.html">Mesa 18.0.1</a> is released.
This is a bug-fix release.
</p>
<h2>April 18, 2018</h2>
<p>
<ahref="relnotes/17.3.9.html">Mesa 17.3.9</a> is released.
This is a bug-fix release.
</p>
<p>
NOTE: It is anticipated that 17.3.9 will be the final release in the
17.3 series. Users of 17.3 are encouraged to migrate to the 18.0
series in order to obtain future fixes.
</p>
<h2>April 03, 2018</h2>
<p>
<ahref="relnotes/17.3.8.html">Mesa 17.3.8</a> is released.
This is a bug-fix release.
</p>
<h2>March 27, 2018</h2>
<p>
<ahref="relnotes/18.0.0.html">Mesa 18.0.0</a> is released. This is a
new development release. See the release notes for more information
about the release.
</p>
<h2>March 21, 2018</h2>
<p>
<ahref="relnotes/17.3.7.html">Mesa 17.3.7</a> is released.
This is a bug-fix release.
</p>
<h2>February 26, 2018</h2>
<p>
<ahref="relnotes/17.3.6.html">Mesa 17.3.6</a> is released.
This is a bug-fix release.
</p>
<h2>February 19, 2018</h2>
<p>
<ahref="relnotes/17.3.5.html">Mesa 17.3.5</a> is released.
This is a bug-fix release.
</p>
<h2>February 15, 2018</h2>
<p>
<ahref="relnotes/17.3.4.html">Mesa 17.3.4</a> is released.
This is a bug-fix release.
</p>
<h2>January 18, 2018</h2>
<p>
<ahref="relnotes/17.3.3.html">Mesa 17.3.3</a> is released.
This is a bug-fix release.
</p>
<h2>January 8, 2018</h2>
<p>
<ahref="relnotes/17.3.2.html">Mesa 17.3.2</a> is released.
This is a bug-fix release.
</p>
<h2>December 22, 2017</h2>
<p>
<ahref="relnotes/17.2.8.html">Mesa 17.2.8</a> is released.
This is a bug-fix release.
</p>
<p>
NOTE: It is anticipated that 17.2.8 will be the final release in the
17.2 series. Users of 17.2 are encouraged to migrate to the 17.3
series in order to obtain future fixes.
</p>
<h2>December 21, 2017</h2>
<p>
<ahref="relnotes/17.3.1.html">Mesa 17.3.1</a> is released.
This is a bug-fix release.
</p>
<h2>December 14, 2017</h2>
<p>
<ahref="relnotes/17.2.7.html">Mesa 17.2.7</a> is released.
This is a bug-fix release.
</p>
<h2>December 8, 2017</h2>
<p>
<ahref="relnotes/17.3.0.html">Mesa 17.3.0</a> is released. This is a
new development release. See the release notes for more information
about the release.
</p>
<h2>November 25, 2017</h2>
<p>
<ahref="relnotes/17.2.6.html">Mesa 17.2.6</a> is released.
This is a bug-fix release.
</p>
<h2>November 10, 2017</h2>
<p>
<ahref="relnotes/17.2.5.html">Mesa 17.2.5</a> is released.
This is a bug-fix release.
</p>
<h2>October 30, 2017</h2>
<p>
<ahref="relnotes/17.2.4.html">Mesa 17.2.4</a> is released.
This is a bug-fix release.
</p>
<h2>October 19, 2017</h2>
<p>
<ahref="relnotes/17.2.3.html">Mesa 17.2.3</a> is released.
This is a bug-fix release.
</p>
<h2>October 2, 2017</h2>
<p>
<ahref="relnotes/17.2.2.html">Mesa 17.2.2</a> is released.
This is a bug-fix release.
</p>
<h2>September 25, 2017</h2>
<p>
<ahref="relnotes/17.1.10.html">Mesa 17.1.10</a> is released.
This is a bug-fix release.
</p>
<p>
NOTE: It is anticipated that 17.1.10 will be the final release in the
17.1 series. Users of 17.1 are encouraged to migrate to the 17.2
series in order to obtain future fixes.
</p>
<h2>September 17, 2017</h2>
<p>
<ahref="relnotes/17.2.1.html">Mesa 17.2.1</a> is released.
This is a bug-fix release.
</p>
<h2>September 8, 2017</h2>
<p>
<ahref="relnotes/17.1.9.html">Mesa 17.1.9</a> is released.
This is a bug-fix release.
</p>
<h2>September 4, 2017</h2>
<p>
<ahref="relnotes/17.2.0.html">Mesa 17.2.0</a> is released. This is a
new development release. See the release notes for more information
about the release.
</p>
<h2>August 28, 2017</h2>
<p>
<ahref="relnotes/17.1.8.html">Mesa 17.1.8</a> is released.
This is a bug-fix release.
</p>
<h2>August 21, 2017</h2>
<p>
<ahref="relnotes/17.1.7.html">Mesa 17.1.7</a> is released.
This is a bug-fix release.
</p>
<h2>August 7, 2017</h2>
<p>
<ahref="relnotes/17.1.6.html">Mesa 17.1.6</a> is released.
This is a bug-fix release.
</p>
<h2>July 14, 2017</h2>
<p>
<ahref="relnotes/17.1.5.html">Mesa 17.1.5</a> is released.
This is a bug-fix release.
</p>
<h2>June 30, 2017</h2>
<p>
<ahref="relnotes/17.1.4.html">Mesa 17.1.4</a> is released.
This is a bug-fix release.
</p>
<h2>June 19, 2017</h2>
<p>
<ahref="relnotes/17.1.3.html">Mesa 17.1.3</a> is released.
This is a bug-fix release.
</p>
<h2>June 5, 2017</h2>
<p>
<ahref="relnotes/17.1.2.html">Mesa 17.1.2</a> is released.
This is a bug-fix release.
</p>
<h2>June 1, 2017</h2>
<p>
<ahref="relnotes/17.0.7.html">Mesa 17.0.7</a> is released.
This is a bug-fix release.
</p>
<p>
NOTE: It is anticipated that 17.0.7 will be the final release in the 17.0
series. Users of 17.0 are encouraged to migrate to the 17.1 series in order
to obtain future fixes.
</p>
<h2>May 25, 2017</h2>
<p>
<ahref="relnotes/17.1.1.html">Mesa 17.1.1</a> is released.
This is a bug-fix release.
</p>
<h2>May 12, 2017</h2>
<p>
<ahref="relnotes/17.0.6.html">Mesa 17.0.6</a> is released.
This is a bug-fix release.
</p>
<h2>May 10, 2017</h2>
<p>
<ahref="relnotes/17.1.0.html">Mesa 17.1.0</a> is released. This is a
new development release. See the release notes for more information
about the release.
</p>
<h2>April 28, 2017</h2>
<p>
<ahref="relnotes/17.0.5.html">Mesa 17.0.5</a> is released.
This is a bug-fix release.
</p>
<h2>April 17, 2017</h2>
<p>
<ahref="relnotes/17.0.4.html">Mesa 17.0.4</a> is released.
This is a bug-fix release.
</p>
<h2>April 1, 2017</h2>
<p>
<ahref="relnotes/17.0.3.html">Mesa 17.0.3</a> is released.
This is a bug-fix release.
</p>
<h2>March 20, 2017</h2>
<p>
<ahref="relnotes/13.0.6.html">Mesa 13.0.6</a> and
<ahref="relnotes/17.0.2.html">Mesa 17.0.2</a> are released.
These are bug-fix releases from the 13.0 and 17.0 branches, respectively.
</p>
<p>
NOTE: It is anticipated that 13.0.6 will be the final release in the 13.0
series. Users of 13.0 are encouraged to migrate to the 17.0 series in order
to obtain future fixes.
</p>
<h2>March 4, 2017</h2>
<p>
<ahref="relnotes/17.0.1.html">Mesa 17.0.1</a> is released.
This is a bug-fix release.
</p>
<h2>February 20, 2017</h2>
<p>
<ahref="relnotes/13.0.5.html">Mesa 13.0.5</a> is released.
This is a bug-fix release.
</p>
<h2>February 13, 2017</h2>
<p>
<ahref="relnotes/17.0.0.html">Mesa 17.0.0</a> is released. This is a
new development release. See the release notes for more information
about the release.
</p>
<h2>February 1, 2017</h2>
<p>
<ahref="relnotes/13.0.4.html">Mesa 13.0.4</a> is released.
This is a bug-fix release.
</p>
<h2>January 23, 2017</h2>
<p>
<ahref="relnotes/12.0.6.html">Mesa 12.0.6</a> is released.
This is a bug-fix release.
</p>
<p>
NOTE: This is an extra release for the 12.0 stable branch, as per developers'
feedback. It is anticipated that 12.0.6 will be the final release in the 12.0
series. Users of 12.0 are encouraged to migrate to the 13.0 series in order
to obtain future fixes.
</p>
<h2>January 5, 2017</h2>
<p>
<ahref="relnotes/13.0.3.html">Mesa 13.0.3</a> is released.
This is a bug-fix release.
</p>
<h2>December 5, 2016</h2>
<p>
<ahref="relnotes/12.0.5.html">Mesa 12.0.5</a> is released.
This is a bug-fix release.
</p>
<p>
NOTE: It is anticipated that 12.0.5 will be the final release in the 12.0
series. Users of 12.0 are encouraged to migrate to the 13.0 series in order
to obtain future fixes.
</p>
<h2>November 28, 2016</h2>
<p>
<ahref="relnotes/13.0.2.html">Mesa 13.0.2</a> is released.
This is a bug-fix release.
</p>
<h2>November 14, 2016</h2>
<p>
<ahref="relnotes/13.0.1.html">Mesa 13.0.1</a> is released.
This is a bug-fix release.
</p>
<h2>November 10, 2016</h2>
<p>
<ahref="relnotes/12.0.4.html">Mesa 12.0.4</a> is released.
This is a bug-fix release.
</p>
<h2>November 1, 2016</h2>
<p>
<ahref="relnotes/13.0.0.html">Mesa 13.0.0</a> is released. This is a
new development release. See the release notes for more information
about the release.
</p>
<h2>September 15, 2016</h2>
<p>
<ahref="relnotes/12.0.3.html">Mesa 12.0.3</a> is released.
This is a bug-fix release.
</p>
<h2>September 2, 2016</h2>
<p>
<ahref="relnotes/12.0.2.html">Mesa 12.0.2</a> is released.
This is a bug-fix release.
</p>
<h2>July 8, 2016</h2>
<p>
<ahref="relnotes/12.0.1.html">Mesa 12.0.1</a> is released.
This is a bug-fix release, resolving build issues in the r600 and
radeonsi drivers.
</p>
<p>
<ahref="relnotes/12.0.0.html">Mesa 12.0.0</a> is released. This is a
new development release. See the release notes for more information
about the release.
</p>
<h2>May 9, 2016</h2>
<p>
<ahref="relnotes/11.1.4.html">Mesa 11.1.4</a> and
<ahref="relnotes/11.2.2.html">Mesa 11.2.2</a> are released.
These are bug-fix releases from the 11.1 and 11.2 branches, respectively.
</p>
<p>
<br>
NOTE: It is anticipated that 11.1.4 will be the final release in the 11.1.4
series. Users of 11.1 are encouraged to migrate to the 11.2 series in order
to obtain future fixes.
@@ -708,8 +53,7 @@ This is a bug-fix release.
<p>
<ahref="relnotes/11.0.9.html">Mesa 11.0.9</a> is released.
This is a bug-fix release.
</p>
<p>
<br>
NOTE: It is anticipated that 11.0.9 will be the final release in the 11.0
series. Users of 11.0 are encouraged to migrate to the 11.1 series in order
to obtain future fixes.
@@ -741,7 +85,7 @@ This is a bug-fix release.
</p>
<p>
Mesa demos 8.3.0 is also released.
See the <ahref="https://lists.freedesktop.org/archives/mesa-announce/2015-December/000191.html">announcement</a> for more information about the release.
See the <ahref="http://lists.freedesktop.org/archives/mesa-announce/2015-December/000191.html">announcement</a> for more information about the release.
You can download it from <ahref="ftp://ftp.freedesktop.org/pub/mesa/demos/8.3.0/">ftp.freedesktop.org/pub/mesa/demos/8.3.0/</a>.
</p>
@@ -773,8 +117,7 @@ This is a bug-fix release.
<p>
<ahref="relnotes/10.6.9.html">Mesa 10.6.9</a> is released.
This is a bug-fix release.
</p>
<p>
<br>
NOTE: It is anticipated that 10.6.9 will be the final release in the 10.6
series. Users of 10.6 are encouraged to migrate to the 11.0 series in order
to obtain future fixes.
@@ -845,8 +188,7 @@ This is a bug-fix release.
<p>
<ahref="relnotes/10.5.9.html">Mesa 10.5.9</a> is released.
This is a bug-fix release.
</p>
<p>
<br>
NOTE: It is anticipated that 10.5.9 will be the final release in the 10.5
series. Users of 10.5 are encouraged to migrate to the 10.6 series in order
to obtain future fixes.
@@ -956,8 +298,7 @@ This is a bug-fix release.
and <ahref="relnotes/10.4.2.html">Mesa 10.4.2</a> are released.
These are bug-fix releases from the 10.3 and 10.4 branches, respectively.
</p>
<p>
<br>
NOTE: It is anticipated that 10.3.7 will be the final release in the 10.3
series. Users of 10.3 are encouraged to migrate to the 10.4 series in order
to obtain future fixes.
@@ -1008,8 +349,7 @@ This is a bug-fix release.
and <ahref="relnotes/10.3.1.html">Mesa 10.3.1</a> are released.
These are bug-fix releases from the 10.2 and 10.3 branches, respectively.
</p>
<p>
<br>
NOTE: It is anticipated that 10.2.9 will be the final release in the 10.2
series. Users of 10.2 are encouraged to migrate to the 10.3 series in order
to obtain future fixes.
@@ -1060,7 +400,7 @@ This is a bug-fix release.
<p>
Mesa demos 8.2.0 is released.
See the <ahref="https://lists.freedesktop.org/archives/mesa-announce/2014-July/000100.html">announcement</a> for more information about the release.
See the <ahref="http://lists.freedesktop.org/archives/mesa-announce/2014-July/000100.html">announcement</a> for more information about the release.
You can download it from <ahref="ftp://ftp.freedesktop.org/pub/mesa/demos/8.2.0/">ftp.freedesktop.org/pub/mesa/demos/8.2.0/</a>.
</p>
@@ -1121,8 +461,7 @@ This is a bug-fix release.
<p>
<ahref="relnotes/10.0.5.html">Mesa 10.0.5</a> is released.
This is a bug-fix release.
</p>
<p>
<br>
NOTE: Since the 10.1.1 release is being released concurrently, it is
anticipated that 10.0.5 will be the final release in the 10.0
series. Users of 10.0 are encouraged to migrate to the 10.1 series in
@@ -1240,7 +579,7 @@ This is a bug fix release.
<p>
Mesa demos 8.1.0 is released.
See the <ahref="https://lists.freedesktop.org/archives/mesa-dev/2013-February/035180.html">announcement</a> for more information about the release.
See the <ahref="http://lists.freedesktop.org/archives/mesa-dev/2013-February/035180.html">announcement</a> for more information about the release.
You can download it from <ahref="ftp://ftp.freedesktop.org/pub/mesa/demos/8.1.0/">ftp.freedesktop.org/pub/mesa/demos/8.1.0/</a>.
</p>
@@ -1601,7 +940,7 @@ with a new test that does over 130 tests of the
shading language and built-in functions.
</p>
<h2>April 4, 2007</h2>
<h2>April 2007</h2>
<p>
Thomas Hellström of Tungsten Graphics has written a whitepaper
describing the new DRI memory management system.
@@ -1936,7 +1275,7 @@ and primarily just incorporates bug fixes.
<h2>December 28, 2003</h2>
<p>
The Mesa CVS server has been moved to <ahref="https://www.freedesktop.org">
The Mesa CVS server has been moved to <ahref="http://www.freedesktop.org">
freedesktop.org</a> because of problems with SourceForge's anonymous
CVS service.
</p>
@@ -2054,7 +1393,7 @@ Mesa 5.0.2 has been released. This is a stable, bug-fix release.
</pre>
<h2>June 8, 2003</h2>
<h2>June 2003</h2>
<p>
Mesa's directory tree has been overhauled.
@@ -2431,7 +1770,7 @@ Here's what's new:</p>
<h2>April 29, 2001</h2>
<p>New Mesa website</p>
<p>Mark Manning produced the new website.Thanks, Mark!</p>
<p>Mark Manning produced the new website.<br>Thanks, Mark!</p>
<h2>February 14, 2001</h2>
@@ -2508,7 +1847,7 @@ Here's what's new:</p>
</pre>
<h2>March 23, 2000</h2>
<p>I've just upload the Mesa 3.2 beta 1 files to SourceForge at <ahref="https://sourceforge.net/project/showfiles.php?group_id=3">https://sourceforge.net/project/filelist.php?group_id=3</a></p>
<p>I've just upload the Mesa 3.2 beta 1 files to SourceForge at <ahref="http://sourceforge.net/project/showfiles.php?group_id=3">http://sourceforge.net/project/filelist.php?group_id=3</a></p>
<p>3.2 (note even number) is a stabilization release of Mesa 3.1 meaning it's mainly
just bug fixes.</p>
<p>Here's what's changed:</p>
@@ -2550,14 +1889,13 @@ just bug fixes.</p>
</pre>
<p>Please report any problems with this release ASAP. Bugs should be filed on the
Mesa3D website at sourceforge.
</p>
<p>After 3.2 is wrapped up I hope to release 3.3 beta 1 soon afterward.</p>
Mesa3D website at sourceforge.<br>
After 3.2 is wrapped up I hope to release 3.3 beta 1 soon afterward.</p>
<p>-- Brian</p>
<h2>December 17, 1999</h2>
<p>A Slashdot interview with Brian about Mesa (questions submitted by Slashdot readers)
can be found at <ahref="https://slashdot.org/interviews/99/12/17/0927212.shtml">https://slashdot.org/interviews/99/12/17/0927212.shtml</a>.</p>
can be found at <ahref="http://slashdot.org/interviews/99/12/17/0927212.shtml">http://slashdot.org/interviews/99/12/17/0927212.shtml</a>.</p>
<h2>December 14, 1999</h2>
<p>Mesa 3.1 is released!</p>
@@ -2591,33 +1929,27 @@ BOF meeting is now available.</p>
<p>-Brian</p>
<h2>August 14, 1999</h2>
<p><ahref="https://www.mesa3d.org">www.mesa3d.org</a> is having
<p><ahref="http://www.mesa3d.org">www.mesa3d.org</a> is having
technical problems due to hardware failures at VA Linux systems. The Mac pages,
ftp, and CVS services aren't fully restored yet. Please be patient.</p>
<p>-Brian</p>
<h2>June 7, 1999</h2>
<p>RPMS of the nVidia RIVA server can be found at
<ahref="ftp://ftp.mesa3d.org/mesa/misc/nVidia/">
ftp://ftp.mesa3d.org/mesa/misc/nVidia/</a>.</p>
<p>RPMS of the nVidia RIVA server can be found at<code>ftp://ftp.mesa3d.org/mesa/misc/nVidia/</code>.</p>
<h2>June 2, 1999</h2>
<p><ahref="https://www.nvidia.com/">nVidia</a> has released some Linux binaries for
<p><ahref="http://www.nvidia.com/">nVidia</a> has released some Linux binaries for
xfree86 3.3.3.1, along with the <b>full source</b>, which includes GLX acceleration
<li><ahref="https://www.cs.unc.edu/~olano/papers/2dh-tri/">Triangle Scan Conversion using 2D Homogeneous Coordinates</a></li>
<li><ahref="http://www.cs.unc.edu/~olano/papers/2dh-tri/">Triangle Scan Conversion using 2D Homogeneous Coordinates</a></li>
<li><ahref="http://www.drdobbs.com/parallel/rasterization-on-larrabee/217200602">Rasterization on Larrabee</a> (<ahref="http://devmaster.net/posts/2887/rasterization-on-larrabee">DevMaster copy</a>)</li>
<li><ahref="http://devmaster.net/posts/6133/rasterization-using-half-space-functions">Rasterization using half-space functions</a></li>
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
