From GL 4.4 Core profile:
If both PRIMITIVE_RESTART and PRIMITIVE_RESTART_FIXED_INDEX are
enabled, the index value determined by PRIMITIVE_RESTART_FIXED_INDEX is
used. If PRIMITIVE_RESTART_FIXED_INDEX is enabled, primitive restart is not
performed for array elements transferred by any drawing command not taking a
type parameter, including all of the *Draw* commands other than *DrawEle-
ments*.
Cc: 10.2 10.3 10.4 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 8f5d309521)
This patch reduces the likelihood of pointer arithmetic overflow bugs in
gather_oa_results(), like the one fixed by b69c7c5dac.
I haven't yet encountered any overflow bugs in the wild along this
patch's codepath. But I get nervous when I see code patterns like this:
(void*) + (int) * (int)
I smell 32-bit overflow all over this code.
This patch retypes 'snapshot_size' to 'ptrdiff_t', which should fix any
potential overflow.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
(cherry picked from commit 414be86c96)
This patch reduces the likelihood of pointer arithmetic overflow bugs in
intel_texsubimage_tiled_memcpy() , like the one fixed by b69c7c5dac.
I haven't yet encountered any overflow bugs in the wild along this
patch's codepath. But I recently solved, in commit b69c7c5dac, an overflow
bug in a line of code that looks very similar to pointer arithmetic in
this function.
This patch conceptually applies the same fix as in b69c7c5dac. Instead
of retyping the variables, though, this patch adds some casts. (I tried
to retype the variables as ptrdiff_t, but it quickly got very messy. The
casts are cleaner).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
(cherry picked from commit 225a09790d)
This is a partial revert of c89306983c.
It split the {start,base}_vertex_location handling into several steps:
1. Set brw->draw.start_vertex_location = prim[i].start
and brw->draw.base_vertex_location = prim[i].basevertex.
(This happened once per _mesa_prim, in the main drawing loop.)
2. Add brw->vb.start_vertex_bias and brw->ib.start_vertex_offset
appropriately. (This happened in brw_prepare_shader_draw_parameters,
which was called just after brw_prepare_vertices, as part of state
upload, and only happened when BRW_NEW_VERTICES was flagged.)
3. Use those values when emitting 3DPRIMITIVE (once per _mesa_prim).
If we drew multiple _mesa_prims, but didn't flag BRW_NEW_VERTICES on
the second (or later) primitives, we would do step #1, but not #2.
The first _mesa_prim would get correct values, but subsequent ones
would only get the first half of the summation.
The reason I originally did this was because I needed the value of
gl_BaseVertexARB to exist in a buffer object prior to uploading
3DSTATE_VERTEX_BUFFERS. I believed I wanted to upload the value
of 3DPRIMITIVE's "Base Vertex Location" field, which was computed
as: (prims[i].indexed ? prims[i].start : prims[i].basevertex) +
brw->vb.start_vertex_bias. The latter value wasn't available until
after brw_prepare_vertices, and the former weren't available in the
state upload code at all. Hence the awkward split.
However, I believe that including brw->vb.start_vertex_bias was a
mistake. It's an extra bias we apply when uploading vertex data into
VBOs, to move [min_index, max_index] to [0, max_index - min_index].
>From the GL_ARB_shader_draw_parameters specification:
"<gl_BaseVertexARB> holds the integer value passed to the <baseVertex>
parameter to the command that resulted in the current shader
invocation. In the case where the command has no <baseVertex>
parameter, the value of <gl_BaseVertexARB> is zero."
I conclude that gl_BaseVertexARB should only include the baseVertex
parameter from glDraw*Elements*, not any internal biases we add for
optimization purposes.
With that in mind, gl_BaseVertexARB only needs prim[i].start or
prim[i].basevertex. We can simply store that, and go back to computing
start_vertex_location and base_vertex_location in brw_emit_prim(), like
we used to. This is much simpler, and should actually fix two bugs.
Fixes missing geometry in Unvanquished.
Cc: "10.4 10.3" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85529
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
(cherry picked from commit c633528cba)
Fixes the piglits which check that gl_VertexID includes the base vertex
offset:
arb_draw_indirect-vertexid elements
gl-3.2-basevertex-vertexid
Note that this leaves out the original G80, for which this will continue
to fail. It could be fixed by passing a driver constbuf value in, but
that's beyond the scope of this change.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit be0311c962)
E.g. this could happen on older kernels which don't support the
RADEON_INFO_SI_BACKEND_ENABLED_MASK query yet. The code in
si_write_harvested_raster_configs() doesn't deal with this correctly and
would probably mangle the value badly.
Cc: "10.4 10.3" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
(cherry picked from commit b3057f8097)
We were assuming, when constructing a new brw_reg struct, that the
negate and abs register modifiers would not be present by default in
the new register.
Now, we force explicitly setting these values when constructing a new
register.
This will avoid problems like forgetting to properly set them when we
are using a previous register to generate this new register, as it was
happening in the dFdx and dFdy generation functions.
Fixes piglit test shaders/glsl-deriv-varyings
Cc: "10.4 10.3" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82991
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 8517e665bc)
glXSwapBuffersMscOML() with target_msc=divisor=remainder=0 gets
translated into target_msc=divisor=0 but remainder=1 by the mesa
api. This is done for server DRI2 where there needs to be a way
to tell the server-side DRI2ScheduleSwap implementation if a call
to glXSwapBuffers() or glXSwapBuffersMscOML(dpy,window,0,0,0) was
done. remainder = 1 was (ab)used as a flag to tell the server to
select proper semantic. The DRI3/Present backend ignored this
signalling, treated any target_msc=0 as glXSwapBuffers() request,
and called xcb_present_pixmap with invalid divisor=0, remainder=1
combo. The present extension responded kindly to this with a
BadValue error and dropped the request, but mesa's DRI3/Present
backend doesn't check for error codes. From there on stuff went
downhill quickly for the calling OpenGL client...
This patch fixes the problem.
v2: Change comments to be more clear, with reference to
relevant spec, as suggested by Eric Anholt.
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 0d7f4c8658)
Restores proper immediate tearing swap behaviour for
OpenGL bufferswap under DRI3/Present.
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
v2: Add Frank Binns signed off by for his original earlier
patch from April 2014, which is identical to this one, and
Chris Wilsons reviewed tag from May 2014 for that patch, ergo
also for this one.
v3: Incorporate comment about triple buffering as suggested
by Axel Davy, and reference to relevant spec provided by
Eric Anholt.
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 455d3036fa)
Prevent calls to glXGetSyncValuesOML() and glXWaitForMscOML()
from overwriting the (ust,msc) values of the last successfull
swapbuffers call (PresentPixmapCompleteNotify event), as
glXWaitForSbcOML() relies on those values corresponding to
the most recent completed swap, not to whatever was last
returned from the server.
Problematic call sequence without this patch would have been, e.g.,
glXSwapBuffers()
... wait ...
swap completes -> PresentPixmapComplete event -> (ust,msc)
updated to reflect swap completion time and count.
... wait for at least 1 video refresh cycle/vblank increment.
glXGetSyncValuesOML()
-> PresentNotifyMsc event overwrites (ust,msc) of swap
completion with (ust,msc) of most recent vblank
glXWaitForSbcOML()
-> Returns sbc of last completed swap but (ust,msc) of last
completed vblank, not of last completed swap.
-> Client is confused.
Do this by tracking a separate set of (ust, msc) for the
dri3_wait_for_msc() call than for the dri3_wait_for_sbc()
call.
This makes the glXWaitForSbcOML() call robust again and restores
consistent behaviour with the DRI2 implementation.
Fixes applications originally written and tested against
DRI2 which also rely on this not regressing under DRI3/Present,
e.g., Neuro-Science software like Psychtoolbox-3.
This patch fixes the problem.
v2: Rename vblank_msc/ust to notify_msc/ust as suggested by
Axel Davy for better clarity.
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
(cherry picked from commit ad8b0e8bf6)
Conflicts:
src/glx/dri3_glx.c
targetSBC == 0 is a special case, which asks the function
to block until all pending OpenGL bufferswap requests have
completed.
Currently the function just falls through for targetSBC == 0,
returning bogus results.
This breaks applications originally written and tested against
DRI2 which also rely on this not regressing under DRI3/Present,
e.g., Neuro-Science software like Psychtoolbox-3.
This patch fixes the problem.
v2: Simplify as suggested by Axel Davy. Add comments proposed
by Eric Anholt.
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 8cab54de16)
On evergreen there are 4 regs, on r600/700 there is only one.
Don't initialise regs and trash someone elses state.
Not sure this fixes anything, but hey one less stupid.
Reviewed-By: Glenn Kennard <glenn.kennard@gmail.com>
Cc: "10.3 10.4" mesa-stable@lists.freedesktop.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 7f21cf7198)
Harvested GPUs have some of their render backends disabled, so
in order to prevent the hardware from trying to render things
with these disabled backends we need to correctly program
the PA_SC_RASTER_CONFIG register.
v2:
- Write RASTER_CONFIG for all SEs.
v3:
- Set GRBM_GFX_INDEX.INSTANCE_BROADCAST_WRITES bit.
- Set GRBM_GFX_INFEX.SH_BROADCAST_WRITES bit when done setting
PA_SC_RASTER_CONFIG.
- Get num_se and num_sh_per_se from kernel.
v4:
- Get correct value for num_se
- Remove loop for setting PA_SC_RASTER_CONFIG
- Only compute raster config when a backend has been disabled.
v5: Michel Dänzer
- Fix computation for chips with multiple SEs
https://bugs.freedesktop.org/show_bug.cgi?id=60879
CC: "10.4 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 67dcbcd92c)
The GS has an interesting use for mul. Because the GS can emit multiple
vertices per input vertex, and it also has a unique count at the top of the URB
payload, the GS unit needs to be able to dynamically specify URB write offsets
(relative to the global offset). The documentation in the function has a very
good explanation from Paul on the mechanics.
This fixes around 2000 piglit tests on BSW.
v2:
Reworded commit message (Ben) no mention of CHV (Matt)
Change SHRT_MAX to USHRT_MAX (Ken, and Matt)
Update comment in code to reflect the use of UW (Ben)
Add Gen7+ assertion for the relevant GS code, since it won't work on Gen6- (Ken)
Drop the bogus hunk in emit_control_data_bits() (Ken)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84777 (with many dupes)
Cc: "10.4 10.3 10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit f13870db09)
height=0 is legal for 1D array textures (as depth=0 is legal for
2D arrays). Fixes new piglit ext_texture_array-errors test.
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
(cherry picked from commit 4e6244e80f)
When converting a uniform array reference to a pull constant load, the
`reladdr` expression itself may have its own `reladdr`, arbitrarily
deeply. This arises from expressions like:
a[b[x]] where a, b are uniform arrays (or lowered const arrays),
and x is not a constant.
Just iterate the lowering to pull constants until we stop seeing these
nested. For most shaders, there will be only one pass through this loop.
Fixes the piglit test:
tests/spec/glsl-1.20/linker/double-indirect-1.shader_test
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit adefccd12a)
Conflicts:
src/mesa/drivers/dri/i965/brw_vec4_visitor.cpp
res->bind is not an indicator of how the resource is currently bound.
buffers can be rebound across different binding points without changing
underlying storage.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.4 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit fecae4625c)
For 1D and 2D arrays we don't want the other coordinates being
offset and affecting where we sample. I wrote this patch 6 months
ago but lost it.
Fixes:
./bin/tex-miplevel-selection textureLodOffset 1DArray
./bin/tex-miplevel-selection textureLodOffset 2DArray
./bin/tex-miplevel-selection textureOffset 1DArray
./bin/tex-miplevel-selection textureOffset 1DArrayShadow
./bin/tex-miplevel-selection textureOffset 2DArray
./bin/tex-miplevel-selection textureOffset(bias) 1DArray
./bin/tex-miplevel-selection textureOffset(bias) 2DArray
v2: rewrite to handle more cases and be consistent with code
above.
Reviewed-by: Glenn Kennard <glenn.kennard@gmail.com>
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 1830138cc0)
Not all drivers can set gl_Layer from VS. Add a fallback that passes the
instance id from VS to GS, and then uses the GS to set the layer.
Tested by adding
quad_buffers |= clear_buffers;
clear_buffers = 0;
to the st_Clear logic, and forcing set_vertex_shader_layered in all
cases. No piglit regressions (on piglits with 'clear' in the name).
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: "10.4 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 68db29c434)
Some of the geom shader tests produce an empty vertex shader,
on cayman we'd crash in the finaliser because last_cf was NULL.
cayman doesn't need the NOP workaround, so if the code arrives
here with no last_cf, just emit an END.
fixes crashes in a bunch of piglit geom shader tests.
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Glenn Kennard <glenn.kennard@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 4e520101e6)
The sampler_array_size field was added by "mesa/st: add support for
dynamic sampler offsets". But the field wasn't getting copied in
the get_pixel_transfer_visitor() or get_bitmap_visitor() functions.
The count_resources() function then didn't properly compute the
glsl_to_tgsi_visitor::samplers_used bitmask. Then, we didn't declare
all the sampler registers in st_translate_program(). Finally, we
asserted when we tried to emit a tgsi ureg src register with File =
TGSI_FILE_UNDEFINED.
Add the missing assignments and some new assertions to catch the
invalid register sooner.
Cc: "10.3, 10.4" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
(cherry picked from commit 11abd7b2bc)
Using the asynchronous DMA engine for multi-dimensional operations seems
to cause random GPU lockups for various people. While the root cause for
this might need to be fixed in the kernel, let's disable it for now.
Before re-enabling this, please make sure you can hit all newly enabled
paths in your testing, preferably with both piglit and real world apps,
and get in touch with people on the bug reports below for stability
testing.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85647
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83500
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Grigori Goronzy <greg@chown.ath.cx>
(cherry picked from commit ae4536b4f7)
A nomination unadorned with a specific version is now interpreted as
being aimed at the 10.4 branch, which was recently opened.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
So when checking/building sse code we have three possibilities:
1 Old compiler, throws an error when using -msse*
2 New compiler, user disables sse* (-mno-sse*)
3 New compiler, user doesn't disable sse
The original code, added code for #1 but not #2. Later on we patched
around the lack of handling #2 by wrapping the code in __SSE4_1__.
Yet it lead to a missing/undefined symbol in case of #1 or #2, which
might cause an issue for #2 when using the i965 driver.
A bit later we "fixed" the undefined symbol by using #1, rather than
updating it to handle #2. With this commit we set things straight :)
To top it all up, conventions state that in case of conflicting
(-enable-foo -disable-foo) options, the latter one takes precedence.
Thus we need to make sure to prepend -msse4.1 to CFLAGS in our test.
v2: Clean the #includes. Suggested by Ilia, Matt & Siavash.
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Siavash Eliasi <siavashserver@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 1a6ae84041)
On Windows, DllMain calls and thread creation/destruction are
serialized, so when llvmpipe is destroyed from DllMain waiting for the
rasterizer threads to finish will deadlock.
So, instead of waiting for rasterizer threads to have finished, simply wait for the
rasterizer threads to notify they are just about to finish.
Verified with this very simple program:
#include <windows.h>
int main() {
HMODULE hModule = LoadLibraryA("opengl32.dll");
FreeLibrary(hModule);
}
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=76252
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Cc: 10.2 10.3 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 706ad3b649)
Squashed together with:
llvmpipe: Call pipe_thread_wait() on Linux.
To address http://lists.freedesktop.org/archives/mesa-dev/2014-November/070569.html
In short, revert 706ad3b649 for non-Windows
OSes.
(cherry picked from commit d5b1731178)
MSVC replaces the "F" in "255.0F" with the macro argument which leads
to an error. s/F/FLT/ to avoid that.
It turns out we weren't using this macro at all on MSVC until the
recent "mesa: Drop USE_IEEE define." change.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
(cherry picked from commit 9608193cbc)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85918
Nominated-by: Roland Scheidegger <sroland@vmware.com>
This reverts commit 20836c8185.
255 is a huge number. If you have a loop with 255 iterations, unrolling it
will exceed the SM3 instruction limit. Let's use the default again.
The comment about a SM3 limit doesn't make sense. For SM3, we generally
want 32 (default) or a lower number due to the SM3 instruction limit, which
is 512 instructions. For SM4, we can try higher numbers if needed, but
some shaders can end up being pretty huge and shader compilation can take
more time.
This fixes a shader compile failure on R500/SM3. Reported on IRC.
Cc: 10.2 10.3 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 6fcb5520b7)
Remap table for uniforms may contain empty entries when using explicit
uniform locations. If no active/inactive variable exists with given
location, remap table contains NULL.
v2: move remap table bounds check before existence check (Ian Romanick)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Tested-by: Erik Faye-Lund <kusmabite@gmail.com> (v1)
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83574
(cherry picked from commit 9bd139e451)
We don't have a scissor enable bit in hw, so when a raster state change
results in scissor enable bit changing, we need to also mark scissor
state as dirty.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 3eb8289aa4)
The optimization of avoiding restore (mem2gmem) if there was a clear
falls down a bit if you don't have a fullscreen scissor. We need to
make the decision logic a bit more clever to keep track of *what* was
cleared, so that we can (a) completely skip mem2gmem if entire buffer
was cleared, or (b) skip mem2gmem on a per-tile basis for tiles that
were completely cleared.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 01b757e2b0)
FD_MESA_DEBUG=nocp will disable copy propagation pass.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 4f17e026bb)
Conflicts:
src/gallium/drivers/freedreno/ir3/ir3_cmdline.c
It seems like the hardware is unhappy if we execute a kill instruction
prior to last input (ei). Probably the shader thread stops executing
and the end-input flag is never set.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 8a0ffedd8d)
Because we reuse various bits of emit code (for state/vertex/prog/etc)
for both regular draws and internal draws (gmem<->mem, clear, etc), the
number of parameters getting passed around has been growing. Refactor
to group these into fd3_emit. This simplifies fxn signatures, avoids
passing around shader key on the stack, etc. It also gives us a nice
place to cache shader-variant lookup to avoid looking up shader variants
multiple times per draw (without having to *also* pass them around as
fxn args everywhere).
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit d595987ea3)
Get rid of fd3_vertex_buf and use fd_vertex_state directly for all
draws. Removes a tiny bit of CPU overhead for munging around the vertex
state every time it is emitted, but more importantly it cleans things up
for later optimizations, so the emit paths don't have to special case
internal draws (gmem<->mem, clears, etc) with regular draws.
Instead of constructing fd3_vertex_buf array each time for internal
draws, and context init time pre-create solid_vbuf_state and
blit_vbuf_state.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit d5d80b3739)
Fixes a few issues, including a potential empty-IB (which triggers gpu
hangs in piglit occlusion_query_meta_no_fragments)
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 7297bdbd50)
Possibly we should map the front color to black (zeroes). But not sure
there is a way to do that without generating a shader variant.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit a262c601d3)
Shaders like:
FRAG
PROPERTY FS_COLOR0_WRITES_ALL_CBUFS 1
DCL IN[0], GENERIC[0], PERSPECTIVE
DCL OUT[0], COLOR
DCL SAMP[0]
DCL TEMP[0], LOCAL
IMM[0] FLT32 { 0.0000, 1.0000, 0.0000, 0.0000}
0: TEX TEMP[0], IN[0].xyyy, SAMP[0], 2D
1: MOV OUT[0], IMM[0].xyxx
2: END
cause unhappyness. They have an IN[], but once this is compiled the
useless TEX instruction goes away. Leaving a varying that is never
fetched, which makes the hw unhappy.
In the process fix a signed vs unsigned compare. If the vertex shader
has max_reg=-1, MAX2() vs an unsigned would not give the desired result.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit af4d088395)
Still failing a bunch of the fairly picky texelFetch tests, but the
1D(Array) ones are full passes.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
(cherry picked from commit 33c9ad97bf)
Experimentally, this makes *ArrayShadow tex-miplevel-selection tests
pass.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
(cherry picked from commit 5bba74c64b)
Since the RA has to be done s.t. each one gets its own (adjacent)
register, it would complicate matters if instructions were allowed to be
repeated. This enables copy-propagation use in situations where
previously that might have happened.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 3dd9a0d6fd)
Makes the command stream a bit tighter when there are lots of
immediates.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit f5eeb8a6dc)
Above a certain limit use CACHE mode instead of BUFFER mode. This
should solve gpu hangs with large shader programs.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 7309c6126f)
Blitter can still have transfers hanging around which it frees in
util_blitter_destroy(). So let it clean up before we yank the
transfer_pool from under it.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit cc355f1c06)
Indirect registers consume an additional token. Try to clean up the
token calculation math a bit, and fix it at the same time.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 01ff0b28b3)
We need to keep track if a state change other than frag/vert shader
state will trigger us to need a different shader variant, and if
necessary mark the appropriate shader state as dirty. Otherwise we will
forget to re-emit the shader state.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit dce96f6da2)
This is for hw that needs to emulate some texture wrap modes (like
CLAMP) with some help from the shader.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 3541705816)
Keep the existing function as a common helper. But this lets us move an
a2xx specific hack out of common code. And the PIPE_TEX_WRAP_CLAMP
emulation will require an a3xx specific hack. So rather than piling on
hacks, split this out.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit a6746d1124)
Get rid of the 'default' case (as suggestied by imirkin) so compiler
warns us about missing caps. Also add some caps that were missing until
now.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit f7259949da)
4155d1c7 'st/mesa: drop dependence on API profile in st_init_extensions'
broke freedreno because somehow 'PIPE_CAP_MAX_VIEWPORTS' fell through
the cracks. Resulting that we reported zero viewports. So the state
tracker never bothered to give us any valid viewport!
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 546d6c8dc9)
Among other things, fixes a bug for fixed point registers/bitfields.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 24cd746e4b)
At least on a3xx, we cannot do it without some emulation in shader.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 5c72672cdc)
Still some open questions.. and at any rate, no additional piglit passes
due to various wrap modes that we need to emulate in at least some
cases :-(
But it does fix some mystery page-faults.. So add some comments in the
code where there are things that we need to emulate or do more r/e, and
push as-is.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit a87e44da3a)
Previously we would get a potentially computed post-swizzle coord based
on the texture target info, which would not include the bias/lod in the
last argument.
The second argument does not have to be adjacent, so adjusting the order
array did not make sense.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 9a3dcf21d7)
This will make life a lot easier as we add support for additional
instructions.
v2: shadow reference value is always .z or .w
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 53678f5e6b)
And config query and DRM_CONF_SHARE_FD to both mega-driver and
traditional build configs, so that EGL_EXT_image_dma_buf_import
works.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 18291ee17a)
4f338c9b introduced logic to trigger a flush rather than overflowing
cmdstream buffer. But the threshold was too low, triggering flushes
where they were not needed. This caused problems with games like
xonotic.
Part of the problem is that we need to mark all state dirty between
cmdstream submit ioctls, because we cannot rely on state being
preserved across ioctls. But even with that, there are still some
problems that are still being debugged. For now:
1) correctly mark all state dirty
2) introduce FD_MESA_DEBUG flush flag to force rendering to be flushed
between each draw, to trigger problems (so that I can debug)
3) use a more reasonable threshold so for normal usecases we don't
trigger the problems
This at least corrects the regression, but there is still more debugging
to do.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 9b6281a7da)
Each get_dst() should have a matching put_dst(). Add a bit of checking
to catch mistakes.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 59ff81663a)
We need the .w component to end up in .x, since the hw appears to fetch
gl_FragColor starting with the .x coordinate regardless of MRT format.
As long as we are doing this, we might as well throw out the remaining
unneeded components.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 80058c0f08)
Because of render-to-alpha (000x) shenanigans, freedreno needs to do
some special handling when rendering to alpha-only formats. And I
noticed that while we had _is_luminance(), _is_intensity(), etc, an
_is_alpha() helper was missing. So fix that.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 3e0a82b52e)
Since software primitive-restart emulation is going to be removed (and
anyways, mostly seemed to be crash prone in combination with
u_primconvert and oddball scenarios (like PIPE_PRIM_POLYGON with only a
single vertex), might as well do it in hardware (which fortunately
didn't turn out to be too hard to figure out).
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 720cfb6fe9)
Triggered by shaders like:
FRAG
PROPERTY FS_COLOR0_WRITES_ALL_CBUFS 1
DCL OUT[0], COLOR
DCL CONST[0]
DCL TEMP[0..2], LOCAL
0: IF CONST[0].xxxx :0
1: MOV TEMP[0], TEMP[1]
2: ELSE :0
3: MOV TEMP[0], TEMP[2]
4: ENDIF
5: MOV OUT[0], TEMP[0]
6: END
not really a sane shader, although driver segfaulting is probably
not the appropriate response.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit a2c22d80d4)
We currently aren't too clever about dealing with running out of
cmdstream buffer space. Since we use a single buffer for both drawing
and tiling commands, we need to ensure there is enough space at the tail
of the cmdstream buffer to fit the tiling commands.
Until we get more clever, the easy solution is a threshold to trigger
flushing rendering even if the application does not trigger flush (swap,
changing render target, etc). This way we at least don't crash for apps
that do several thousand draw calls (like some piglit tests do).
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 4f338c9bbf)
Most of the things the new compiler still has trouble with basically
amount to cp stage removing too many copies. But without the cp stage,
the shaders the new compiler produces are still better (perf and
correctness) than the old compiler. So a simple thing to do until I
have more time to work on it is first trying falling back to new
compiler without cp, before finally falling back to old compiler.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit fd4884e929)
We can't rely on the value from the assembler if relative addressing is
used. So instead use the max of declared-consts (which does not include
compiler immediates) and what we get from the assembler (which does).
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 5d8f40a53a)
Conflicts:
src/gallium/drivers/freedreno/ir3/ir3_shader.c
all_delayed will also be true if we didn't attempt to schedule anything
due to no more instructions using current addr/pred. We rely on coming
in to block_sched_undelayed() to detect and clean up when there are no
more uses of the current addr/pred, which isn't necessarily an error.
This fixes a regression introduced in b823abed.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 73ff4c5f70)
There are some cases where the scheduler can get itself into impossible
situations, by scheduling the wrong write to pred or addr register
first. (Ie. it could end up being unable to schedule any instruction if
some instruction which depends on the current addr/reg value also
depends on another addr/reg value.)
To solve this we'd need to be able to insert extra mov instructions
(which would also help when register assignment gets into impossible
situations). To do that, we'd need to move the nop padding from sched
into legalize.
But to start with, just detect when we get into an impossible situation
and bail, rather than sitting forever in an infinite loop. This way it
will at least fall back to the old compiler, which might even work if
you are lucky.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit b823abedf8)
We must convert it to boolean from the DX9 float encoding that Gallium
specifies.
Later, we should probably define that FACE should be 0 or ~0 if native
integers are supported.
Cc: 10.2 10.3 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 9ec305ead7)
The get_variable_being_redeclared() function can free the 'var' argument.
Thereafter, we cannot assume that 'var' is a valid pointer. This patch
replaces 'var->name' with 'earlier->name' in two places and calls
is_gl_identifier(var->name) before 'var' might get freed.
This fixes several piglit GLSL crashes, including:
spec/glsl-1.50/execution/geometry/clip-distance-in-param
spec/glsl-1.50/execution/geometry/clip-distance-bulk-copy
spec/glsl-1.50/compiler/gs-redeclares-pervertex-out-before-global-redeclaration.geom
I'm not sure why these were not spotted sooner.
A similar bug was previously fixed by f9cecca7a.
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
(cherry picked from commit 14379a0644)
Otherwise the caching buffer manager may return a buffer which was created
with a different set of flags, which can cause trouble.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 3ede67a4c6)
Conflicts:
src/gallium/winsys/radeon/drm/radeon_drm_winsys.c
The current implementation of glxUseXFont requires creating
a temporary pixmap and graphics context, which requires a real
old-school X11 Window, not a glxDrawable. This patch changes
things so that glxUseXFont will also accept a glxWindow or
glxPixmap, and lookup the underlying X11 Drawable. Without
this patch glxUseXFont generates a giant stream of Xerrors
about bad drawables and bad graphics contexts.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54372
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 291be28476)
When mapping the buffer a second time, we need to use the new pointer,
not the one from the previous mapping. Otherwise, we will most likely
crash.
Apparently, we've just been getting lucky and getting the same
bo->virtual pointer in both cases. libdrm probably has a hand in that.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 94841b6d5d)
Write-back caching cannot be used for buffers being scanned out by the
display engine; surfaces used for scan-out must be write-through or
uncached. I originally chose WT for render targets because it works in
all cases. However, we really want to use write-back caching where
possible, as it is more efficient.
Most renderbuffers are not used for scanout - off-screen FBOs certainly
are fine, and non-pageflipped backbuffers should be fine as well. So
in most cases WB will work. However, we don't know what will be used
for scan-out, so we instead simply use the PTE value specified by the
kernel, as it knows these things.
This matches our MOCS choice on Haswell.
Fixes performance regressions since commit ee4484be3d
in a microbenchmark (spotted by Eero Tamminen). Improves performance
in GLBenchmark 2.7/EgyptHD by 7.44362% +/- 0.496939% (n=55) on a
Broadwell GT2. Improves performance in a bunch of other microbenchmarks
by ~15% or so.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reported-by: Eero Tamminen <eero.t.tamminen@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit b7844d1248)
Like BDW_MOCS_WB and BDW_MOCS_WT, this specifies that we want to use all
three caches (L3, LLC, and eLLC where available), but leaves the LLC
caching mode up to the kernel's page table entry.
This allows the kernel to pick WB/WT/UC based on whether it's using a
buffer for scanout.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit d489a8a73d)
On Windows, the Piglit primitive-restart test was failing a
glGetError()==0 assertion when it was run w/out any command line
arguments. Piglit's all.py script only runs primitive-restart
with arguments so this case isn't normally hit during a full
piglit run.
The basic problem is Microsoft's opengl32.dll calls glFlush
from wglGetProcAddress() and Piglit uses wglGetProcAddress() to
resolve glPrimitiveRestartNV() which is called inside glBegin/End.
See comments in the code for more info.
Plus, improve the comments for _mesa_alloc_dispatch_table().
Cc: <mesa-stable@lists.freedesktop.org>
Acked-by: Sinclair Yeh <syeh@vmware.com>
(cherry picked from commit c7f0755caa)
While running piglit in virgl, I hit an assert in intel driver.
"qemu-system-x86_64: intel_tex.c:219: intel_map_texture_image: Assertion `tex_image->TexObject->Target != 0x8C18 || h == 1' failed."
Thanks to Eric and Ken for pointing me in the right direction,
Fix the get_tex_depth to do the same fixup as get_tex_rgba does
for 1D array textures.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 8df3c02cdc)
With current makefiles the build fails because source and build paths
are generated incorrectly. With Android build system the top_srcdir and
top_builddir variables are undefined and all paths are relative to where
Android.mk is located. This ends up with path likes
external/mesa/src/mesa/src/mesa/ for both source and build paths, which
are obviously wrong.
This patch fixes this by overriding resulting SRCDIR and BUILDDIR
variables with empty string, so that paths end up being relative to
Android.mk file again. Appending correct build path to generated files
is already done in Android.gen.mk.
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit b4ffd19e6c)
This patch fixes Android build failures by including src/util directory
in compilation. Files inside of this directory are compiled into
libmesa_util static library and linked with resulting libGLES_mesa.
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit d703abf735)
Instead of just segfaulting in the driver when a buffer allocation fails,
report error messages indicating what went wrong so that we can debug things.
As a simple example, chromium wraps Mesa in a sandbox which doesn't allow
access to most syscalls, including the ability to create shared memory
segments for fences. Before, you'd get a simple segfault in mesa and your 3D
acceleration would fail. Now you get:
$ chromium --disable-gpu-blacklist
[10618:10643:0930/200525:ERROR:nss_util.cc(856)] After loading Root Certs, loaded==false: NSS error code: -8018
libGL: pci id for fd 12: 8086:0a16, driver i965
libGL: OpenDriver: trying /local-miki/src/mesa/mesa/lib/i965_dri.so
libGL: Can't open configuration file /home/keithp/.drirc: Operation not permitted.
libGL: Can't open configuration file /home/keithp/.drirc: Operation not permitted.
libGL error: DRI3 Fence object allocation failure Operation not permitted
[10618:10618:0930/200525:ERROR:command_buffer_proxy_impl.cc(153)] Could not send GpuCommandBufferMsg_Initialize.
[10618:10618:0930/200525:ERROR:webgraphicscontext3d_command_buffer_impl.cc(236)] CommandBufferProxy::Initialize failed.
[10618:10618:0930/200525:ERROR:webgraphicscontext3d_command_buffer_impl.cc(256)] Failed to initialize command buffer.
This made it pretty easy to diagnose the problem in the referenced bug report.
Bugzilla: https://code.google.com/p/chromium/issues/detail?id=415681
Signed-off-by: Keith Packard <keithp@keithp.com>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 3202926746)
Some users don't understand that these variables can break OpenGL.
The general is rule is that if an app supports MSAA, you mustn't use
GALLIUM_MSAA.
For example, if an app has an 8xMSAA FBO and GALLIUM_MSAA=4
is set, resolving the FBO to the back buffer will be rejected which will look
like this on all gallium drivers:
http://www.phoronix.com/scan.php?page=article&item=amd_radeonsi_msaa
The environment variables also have no effect on modern apps like TF2, but
there is still a performance hit due to wasted bandwidth and VRAM.
In a nutshell, it does more harm than good.
Cc: 10.2 10.3 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit 8449121971)
This is the only guaranteed way get the patch level for llvm,
since the define cannot always be found in config.h depending
on the version of llvm or the build system used.
CC: 10.2 10.3 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jonathan Gray <jsg@jsg.id.au>
(cherry picked from commit ec566e0f16)
What happens is that a SPLIT operation is part of the spill node, and as
a pseudo op, the instruction gets erased after processing its first def.
However the later defs still need to refer to it, so instead delay
deleting until after that whole RA node is done processing.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79462
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 0147c10c5f)
I'm not familiar with this code, but this sure appears to be a typo.
It looks like the intent is to set each array element, not arrays[0]
each time. Notably, the loop just below uses "array", not "arrays".
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit f81052dc9b)
The code in get.c that handles this uses ctx->Array.VAO->VertexAttrib,
which is a gl_vertex_attrib_array structure, not a gl_client_array.
The offsets of all fields happened to be the same in both structures, at
least on x86_64. "Size," "Type," and "Stride" are obviously the same:
both structures start with the same fields, in the same order.
"Enabled" is dicier: there are different fields before it in both
structures, including pointer sized values which might need special
alignment.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit d0ec6e8509)
ffeb77c7b0 had a typo which turned all signed
integer divisions into unsigned ones. Oops.
This gets us back the 51 little piglits
(all from glsl built-in-functions, fs/vs/gs-op-div-int-ivec2 and similar).
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
(cherry picked from commit 5e1fcc6258)
While the result of signed integer division by zero is undefined by glsl
(and doesn't exist with d3d10), we must not crash, so need to make sure we
don't get sigfpe much like udiv already does.
Unlike udiv where we return 0xffffffff (as required by d3d10) there is
no requirement right now to return anything specific so we use zero.
(cherry picked from commit ffeb77c7b0)
Nominated-by: Roland Scheidegger <sroland@vmware.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83570
The SWZ instruction can have swizzle terms >4 (SWIZZLE_ZERO, SWIZZLE_ONE).
These swizzle terms caused a few assertions to fail.
This started happening after the commit "mesa: Actually use the Mesa IR
optimizer for ARB programs." when replaying some apitrace files.
A new piglit test (tests/asmparsertest/shaders/ARBfp1.0/swz-08.txt)
exercises this.
Cc: "10.3" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
(cherry picked from commit 7b2c703244)
Luminance is the least-significant byte of the uint16, rather than the
lowest byte in memory. Other parts of mesa already handle this correctly
for big-endian, and swrast already handles other MESA_FORMAT_x8y8 formats
correctly. This case was just an odd-one-out.
Signed-off-by: Richard Sandiford <rsandifo@linux.vnet.ibm.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit ecc48f83c8)
In commit 567e2769b8 ("ra: make the p, q
test more efficient") I unknowingly introduced a new requirement to the
register allocator API: the user must set the register class of all
nodes before setting up their interferences, because
ra_add_conflict_list() now uses the classes of the two interfering
nodes. i965 already did this, but r300g was setting up register classes
interleaved with setting up the interference graph. This led to us
calculating the wrong q total, and in certain cases
e78a01d5e6 (" ra: optimistically color
only one node at a time") made it so that this bug caused a segfault. In
particular, the error occurred if the q total was decremented to 1 below
0 for the last node to be pushed onto the stack. Since q_total is an
unsigned integer, it overflowed to 0xffffffff, which is what
lowest_q_total happens to be initialzed to. This means that we would
fail the "new_q_total < lowest_q_total" check on line 476 of
register_allocate.c, and so the node would never be pushed onto the
stack, which led to segfaults in ra_select() when we failed to ever give
it a register.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82828
Cc: "10.3" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Tested-by: Pavel Ondračka <pavel.ondracka@email.cz>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
(cherry picked from commit afd82dcad1)
Commit afe3d1556f (i965: Stop doing
remapping of "special" regs.) stopped remapping delta_x/delta_y, and
additionally stopped considering them always-live. We later realized
delta_x was used in register allocaiton, so we actually needed to remap
it, which was fixed in commit 23d782067a
(i965/fs: Keep track of the register that hold delta_x/delta_y.).
However, that commit didn't restore the "always consider it live" part.
If all the code using delta_x was eliminated, fs_visitor::delta_x would
be left pointing at its old register number. Later code in register
allocation would handle that register number specially...even though it
wasn't actually delta_x.
To combat this, set delta_x/y to BAD_FILE if they're eliminated, and
check for that.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83127
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: "10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 78bd126194)
Unreference the ctx->_Shader object before we delete all the pipeline
objects in the hash table. Before, ctx->_Shader could point to freed
memory when _mesa_reference_pipeline_object(ctx, &ctx->_Shader, NULL)
was called.
Fixes crash when exiting the piglit rendezvous_by_location test on
Windows.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 0d73ac6b02)
Needed for assert.
Fixes build on BE archs with -Werror=implicit-function-declaration.
In file included from
../../../../../src/gallium/auxiliary/draw/draw_fs.c:30:0:
../../../../../src/gallium/auxiliary/util/u_math.h: In function
'util_memcpy_cpu_to_le32':
../../../../../src/gallium/auxiliary/util/u_math.h:810:4: error:
implicit declaration of function 'assert'
[-Werror=implicit-function-declaration]
assert(n % 4 == 0);
^
Cc: "10.3" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 2a13ff954d)
Fixes a regression from "nouveau/vdec: small fixes to h264 handling"
New picking order for frames:
1. Vidbuf pointer matches.
2. Take the first kicked ref.
3. If that fails, take a ref that has a different last_used.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit a41aad8431)
The BSP bo might be too small to contain all of the bsp data,
bump its size on overflow. Also bump inter_bo when this happens,
it might be too small otherwise.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f6afed7076)
If the source is not a GRF, it could have a register >= virtual_grf_count.
Accessing virtual_grf_end with such a register would lead to
out-of-bounds access. Make sure the source is a GRF before accessing
virtual_grf_end.
Fixes Valgrind complaints while compiling some shaders.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 7aeb853c90)
So far we have been using CL_INVOCATION_COUNT to resolve this query but this
is no good with streams, as only stream 0 reaches the clipping stage.
From ARB_transform_feedback3:
"When a generated primitive query for a vertex stream is active, the
primitives-generated count is incremented every time a primitive emitted to
that stream reaches the Discarding Rasterization stage (see Section 3.x)
right before rasterization. This counter is incremented whether or not
transform feedback is active."
Unfortunately, we don't have any registers that provide the number of primitives
written to a specific stream other than the ones that track the number of
primitives written to transform feedback in the SOL stage, so we can't
implement this exactly as specified.
In the past we implemented this feature by activating the SOL unit even if
transform feeback was disabled, but making it so that all buffers were
disabled and it only recorded statistics, which gave us the right semantics
(see 3178d2474a). Unfortunately, this came with
a significant performance impact and had to be reverted.
This new take does not intend to implement the exact semantics required by
the spec, but improves what we have now, since now we return the primitive
count for stream 0 in all cases. With this patch we use
GEN7_SO_PRIM_STORAGE_NEEDED to resolve GL_PRIMITIVES_GENERATED queries
for non-zero streams. This would return the number of primitives written
to transform feedback for each stream instead. Since non-zero streams are
only useful in combination with transform feedback this should not be too
bad, and the only case that I think we would not be supporting would be
the one in which we want to use both GL_PRIMITIVES_GENERATED and
GL_TRANSFORM_FEEDBACK_PRIMITIVES_WRITTEN on the same non-zero stream to
detect buffer overflow.
This patch also fixes the following piglit test:
arb_gpu_shader5-xfb-streams-without-invocations
This test uses both GL_PRIMITIVES_GENERATED and
GL_TRANSFORM_FEEDBACK_PRIMITIVES_WRITTEN queries on non-zero streams, but it
does never hit the overflow case, so both queries are always expected to return
the same value.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f976b4c1bf)
Nominated-by: Kenneth Graunke <kenneth@whitecape.org>
ir_rvalue::constant_expression_value() recursively walks down an IR
tree, attempting to reduce it to a single constant value. This is
useful when you want to know whether a variable has a constant
expression value at all, and if so, what it is.
The constant folding optimization pass attempts to replace rvalues with
their constant expression value from the bottom up. That way, we can
optimize subexpressions, and ideally stop as soon as we find a
non-constant subexpression.
In order to obtain the actual value of an expression, the optimization
pass calls constant_expression_value(). But it should only do so if it
knows the value can be combined into a constant. Otherwise, at each
step of walking back up the tree, it will walk down the tree again, only
to discover what it already knew: it isn't constant.
We properly avoided this call for ir_expression nodes, but not for
ir_swizzle nodes. This patch fixes that, drastically reducing compile
times on certain shaders where tree grafting has given us huge
expression trees. It also fixes SuperTuxKart.
Thanks to Iago and Mike for help in tracking this down.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78468
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 84a40ce86b)
The FS backend has always used 0, and the VS backend has always used 1.
I think 1 is just working around other problems, and is incorrect.
Samplers are baked in; nothing uses the UNIFORM register we would
create, and we shouldn't upload any constant values for them.
Fixes ES3-CTS.shaders.struct.uniform.sampler_array_vertex.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 7865026c04)
Samplers take up zero slots and therefore don't exist in the params
array, nor are they included in stage_prog_data->nr_params. There's no
need to store their size in param_size, as it's only used for dealing
with arrays of "real" uniforms (ones uploaded as shader constants).
We run into all kinds of problems trying to refer to the uniform storage
for variables that don't have uniform storage. For one, we may use some
other variable's index, or access out of bounds in arrays. In the FS
backend, our extra 2 * MaxSamplerImageUnits params for texture rectangle
rescaling paper over a lot of problems. In the VS backend, we claim
samplers take up a slot, which also papers over problems.
Instead, just skip allocating storage for variables that don't have any.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 2408f166db)
Apparently guardband clipping doesn't work like we thought: objects
entirely outside fthe guardband are trivially rejected, regardless of
their relation to the viewport. Normally, the guardband is larger than
the viewport, so this is not a problem. However, when the viewport is
larger than the guardband, this means that we would discard primitives
which were wholly outside of the guardband, but still visible.
We always program the guardband to 8K x 8K to enforce the restriction
that the screenspace bounding box of a single triangle must be no more
than 8K x 8K. So, if the viewport is larger than that, we need to
disable guardband clipping.
Fixes ES3 conformance tests:
- framebuffer_blit_functionality_negative_height_blit
- framebuffer_blit_functionality_negative_width_blit
- framebuffer_blit_functionality_negative_dimensions_blit
- framebuffer_blit_functionality_magnifying_blit
- framebuffer_blit_functionality_multisampled_to_singlesampled_blit
v2: Mention the acronym expansion for TA/TR/MC in the comments.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
(cherry picked from commit 0bac2551e4)
We always uploaded them together, mostly out of laziness - both required
an additional vertex element. However, gl_VertexID now also requires an
additional vertex buffer for storing gl_BaseVertex; for non-indirect
draws this also means uploading (a small amount of) data. This is extra
overhead we don't need if the shader only uses gl_InstanceID.
In particular, our clear shaders currently use gl_InstanceID for doing
layered clears, but don't need gl_VertexID.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "10.3" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 6b6145204d)
In the non-indirect draw case, we call intel_upload_data to upload
gl_BaseVertex. It makes brw->draw.draw_params_bo point to the upload
buffer, and increments the upload BO reference count.
So, we need to unreference it when making brw->draw.draw_params_bo point
at something else, or else we'll retain a reference to stale upload
buffers and hold on to them forever.
This also means that the indirect case should increment the reference
count on the indirect draw buffer when making brw->draw.draw_params_bo
point at it. That way, both paths increment the reference count, so
we can safely unreference it every time.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "10.3" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit e980fe6071)
Now that we have the data available, we need to expose it to the
shaders. We can reuse the same vertex element that we use for
gl_VertexID, but we need to back it by an actual vertex buffer.
A hardware restriction requires that vertex attributes coming from a
buffer (STORE_SRC) must come before any other types (i.e. STORE_0).
So, we have to make gl_BaseVertex be the .x component of the vertex
attribute. This means moving gl_VertexID to a different component.
I chose to move gl_VertexID and gl_InstanceID to the .z and .w
components, respectively, to make room for gl_BaseInstance in the .y
component (which would also come from a buffer, and therefore be
STORE_SRC).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit fbb353bc13)
We'll need to emit another VERTEX_BUFFER_STATE for gl_BaseVertex;
pulling this into a helper function will save us from having to deal
with cross-generation differences in that code.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 87b10c4a71)
This will be used for GL_ARB_shader_draw_parameters, as well as fixing
gl_VertexID, which is supposed to include gl_BaseVertex's value.
For indirect draws, we simply point at the indirect buffer; for normal
draws, we upload the value via the upload buffer.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit fdbabf22e1)
The lower_vertex_id pass converts uses of the gl_VertexID system value
to the gl_BaseVertex and gl_VertexIDMESA system values. Since
gl_VertexID is no longer accessed, it would not be considered active.
Of course, it should be, since the shader uses gl_VertexID.
v2: Move the var->name dereference past the var != NULL check.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 26e949b26e)
Converts gl_VertexID to (gl_VertexIDMESA + gl_BaseVertex). gl_VertexIDMESA
is backed by SYSTEM_VALUE_VERTEX_ID_ZERO_BASE, and gl_BaseVertex is backed
by SYSTEM_VALUE_BASE_VERTEX.
v2: Put the enum in struct gl_constants and propoerly resolve the scope
in C++ code. Fix suggested by Marek.
v3: Reabase on Matt's foreach_in_list changes (was using foreach_list).
v4 (Ken): Use a systemvalue instead of a uniform because
STATE_BASE_VERTEX has been removed.
v5: Use a boolean to select lowering, and only allow one lowering
method. Suggested by Ken.
v6 (Ken): Replace strcmp against literal "gl_BaseVertex"/"gl_VertexID"
with SYSTEM_VALUE enum checks, for efficiency.
v7: Rebase on context constant initialization work.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit ec08b5e768)
There exists hardware, such as i965, that does not implement the OpenGL
semantic for gl_VertexID. Instead, that hardware does not include the
value of basevertex in the gl_VertexID value.
SYSTEM_VALUE_VERTEX_ID_ZERO_BASE is the system value that represents
this semantic.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
(cherry picked from commit 5964a4f344)
v2: Additions to the documentation for SYSTEM_VALUE_VERTEX_ID. Quote
the GL_ARB_shader_draw_parameters spec and mention DirectX SV_VertexID.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
(cherry picked from commit 9afb5ae8ca)
Despite the comment above the function claiming otherwise, the function
did not reswizzle sources, which would lead to bad code generation since
commit 04895f5c, which began claiming we could do such swizzling when we
could not.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82932
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 1ee1d8ab46)
Mesa already defines _GNU_SOURCE for glibc based systems and defining
_GNU_SOURCE will break the Mesa build on other systems such as OpenBSD.
_GNU_SOURCE only seems to be included in llvm-config output when
LLVM is built via autoconf and not when it is built by cmake.
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
(cherry picked from commit c68073e65f)
With recent commit we removed the NEED_NONNULL_WINSYS checks when
selecting the hardware (inc svga) winsys. svga has only one winsys
that explicitly requires libdrm (via it's bundled version of
vmwgfx_drm.h) but configure.ac never really checks for it.
Add the check early to prevent people from shooting themselves when
they select the driver but lack libdrm.
$ ./autogen.sh --disable-dri --disable-egl --disable-gallium-llvm
--with-dri-drivers=swrast --with-gallium-drivers=svga,swrast
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82539
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 40bb6f9313)
UBO loads can be boolean-valued expressions, too, so we need to handle
them in emit_bool_to_cond_code() and emit_if_gen6().
However, unlike most expressions, it doesn't make sense to evaluate
their operands, then do something with the results. We just want to
evaluate the UBO load as a whole---which performs the read from
memory---then load the boolean result into the flag register.
Instead of adding code to handle it, we can simply bypass the
ir_expression handling, and fall through to the default code, which will
do exactly that.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83468
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit a20cc2796f)
ir_triop_csel can return a boolean expression, so we need to handle it
here; we simply forgot when we added ir_triop_csel, and forgot again
when adding it to emit_bool_to_cond_code.
Fixes Piglit's EXT_shader_integer_mix/{vs,fs}-mix-if-bool on Sandybridge.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 6272e60ca3)
This patch fixes use of Altivec pack intrinsics on little-endian PowerPC
systems. Since little-endian operation only affects the load and store
instructions, the semantics of pack (and other) instructions that take
two input vectors implicitly change: the pack instructions still fill
a register placing values from the first operand into the "high" parts
of the register, and values from the second operand into the "low" parts
of the register, but since vector loads and stores perform an endian swap,
the high parts end up at high memory addresses.
To still achieve the desired effect, we have to swap the two inputs to
the pack instruction on little-endian systems. This is done automatically
by the back-end for instructions generated by LLVM, but needs to be done
manually when emitting intrisincs (which still result in that instruction
being emitted directly).
Signed-off-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Signed-off-by: Maarten Lankhorst <dev@mblankhorst.nl>
(cherry picked from commit 0feb977bbf)
Nominated-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
As long as we don't have a workaround for frame based
decoding in VDPAU we should not advertise NV_vdpau_interop.
v2: fix commit message, check if get_video_param is present
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 12fb74fe89)
BitSet::allocate() is being used with the expectation that it would
leave the bitfield untouched if its size hasn't changed, however,
the function always zeroed the last word, which led to obscure bugs
with live set computation.
This also fixes BitSet::resize(), which was broken, but luckily not
being used.
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
(cherry picked from commit b9f9e3ce03)
When a texture is wrapped in a texture view, we can't trust the format in
the miptree itself. This patch allows us to pass the format seperately
through blorp so we can proprerly handled wrapped textures.
It's worth noting here that we can use the miptree format directly for
depth/stencil formats because they cannot be reinterpreted by a texture
view.
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
CC: "10.3" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
(cherry picked from commit 7599886b26)
As older versions of gnu ld did not support --dynamic-list check to see
if it is supported before using it. Non gnu linkers such the apple one
likely lack this option as well.
Fixes the build on OpenBSD which has binutils 2.15 and 2.17.
The --dynamic-list option seems to been have introduced sometime after
binutils 2.17 was released as it is present in 2.18.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 635477dc4b)
While similar in layout, the size of the SVGA3dSize type may be smaller than
the struct drm_vmw_size type that is part of the ioctl interface. The kernel
driver could accordingly overwrite a memory area following the size variable
on the stack. Typically that would be another local variable, causing
breakage in, for example, ubuntu 12.04.5 where the handle local variable
becomes overwritten.
v2: Fix whitespace errors
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Cc: "10.1 10.2 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 2d6206140a)
ir_triop_csel can return a boolean expression, so we need to handle it
here; we simply forgot when we added it.
Fixes Piglit's EXT_shader_integer_mix/{vs,fs}-mix-if-bool.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 8270b048cf)
According to the GLSL 1.40 spec, section 5.7 Structure and Array Operations:
"Array elements are accessed using an expression whose type is int or uint."
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit cfc42db592)
A meta begin/end pair with MESA_META_DRAW_BUFFERS will change visible GL
state. We recreate the draw buffer enums from the buffer bitfield, which
changes GL_BACK to GL_BACK_LEFT (and GL_FRONT to GL_FRONT_LEFT).
This commit modifes the save/restore logic to instead copy the buffer enums
from the gl_framebuffer and then set them on restore using
_mesa_drawbuffers().
It's not clear how this breaks the benchmark in 82796, but fixing meta to not
leak the state change fixes the regression.
No piglit regressions.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=82796
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 8f55174fbd)
With VP2, nv50_miptree is faked because the underlying bo's have to be
laid out in a certain way. This is done by adjusting the address. Make
sure that blits (and everything else for consistency) use the mt address
rather than the bo address as a base.
This fixes retrieving chroma plane with VDPAU.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82255
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 9d52e551a5)
When constant folding a MAD operation, we first fold the multiply and
generate an ADD. However we do so without making sure that the immediate
can be handled in the saturate case. If it can't, load the immediate in
a separate instruction.
Reported-by: Tiziano Bacocco <tizbac2@gmail.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 6c2b079231)
Experimentally, the sampler doesn't appear to like these, neither as
buffer nor as rect textures. So remove 1D from the list of texture types
to make linear when used for staging.
This fixes the OSD in mplayer for VDPAU.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 115d9a5525)
Samplers are only defined up to num_samplers, so set all samplers above
nr to NULL so that we don't try to read them again later.
Tested-by: Christian Ruppert <idl0r@qasl.de>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 362cd26960)
Current method of generating distribution tar-balls involves manually
invoking make + target name in the appropriate places. This temporary
solution is used until we get 'make dist' working.
Currently it does not work, as in order to have the target (which is
also a filename) available in the final Makefile we need to add a PHONY
target + use the correct target name.
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 88cbe3908f)
We've found that there's a buffer overrun bug in flex that's triggered by
using alternation in a lookahead pattern.
Fortunately, we don't need to match the exact {NEWLINE} expression to
detect an empty pragma. It suffices to verify that there are no non-space
characters before any newline character. So we can use a simple [\r\n] to
get the desired behavior while avoiding the flex bug.
Fixes the regression of piglit's 17000-consecutive-chars-identifier test,
(which has been crashing since commit
04e40fd337 ).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82472
Signed-off-by: Carl Worth <cworth@cworth.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
CC: <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 23163df24c)
We switched to these several stable releases ago, (since the MD5 algorithm has
been broken for some time), but only now did I get around to fixing this in
the Makefile rather than just performing this step manually.
CC: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 46d03d37bf)
The optimization relies on CMP setting the destination to 0, which is
equivalent to 0.0f. However, early platforms only set the least
significant byte, leaving the other bits undefined. So, we must disable
the optimization on those platforms.
Oddly, Sandybridge wasn't reported as broken. The PRM states that it
only sets the LSB, but the internal documentation says that it follows
the IVB behavior. Since it wasn't reported as broken, we believe it
really does follow the IVB behavior.
v2: Allow the optimization on Sandybridge (requested by Matt).
+32 piglits on Ironlake.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?=79963
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 97d03b9366)
# Replace in the range between __START_TEST_PATTERN and
# __REPLACE_TEST_PATTERN leaving __START_TEST_PATTERN out
# from the substitution
sed '\%'"${__START_TEST_PATTERN}"'%,\%'"${__REPLACE_TEST_PATTERN}"'%{\%'"${__START_TEST_PATTERN}"'%b;s%'"${__REPLACE_TEST_PATTERN}"'%</system-out><failure type="fail">To view the image differences visit: '"${__DASHBOARD_URL}"'</failure></testcase>%}'\
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
