fix date for 7.0 release

ctx->Point._Attentuation was computed in wrong place and the VB->Eye coord Z
array wasn't indexed correctly in run_point_stage().

.gitignore

@@ -0,0 +1,9 @@
+*.a
+*.o
+*.so
+*.sw[a-z]
+*~
+depend
+depend.bak
+lib
+lib64

Makefile

@@ -7,7 +7,9 @@ SUBDIRS = src progs
 
 default: $(TOP)/configs/current
 	@for dir in $(SUBDIRS) ; do \
-		(cd $$dir ; $(MAKE)) || exit 1 ; \
+		if [ -d $$dir ] ; then \
+			(cd $$dir && $(MAKE)) || exit 1 ; \
+		fi \
 	done
 
 
@@ -16,7 +18,9 @@ doxygen:
 
 clean:
 	@for dir in $(SUBDIRS) ; do \
-		(cd $$dir ; $(MAKE) clean) ; \
+		if [ -d $$dir ] ; then \
+			(cd $$dir && $(MAKE) clean) ; \
+		fi \
 	done
 
 
@@ -34,9 +38,12 @@ realclean:
 
 install:
 	@for dir in $(SUBDIRS) ; do \
-		(cd $$dir ; $(MAKE) install) || exit 1 ; \
+		if [ -d $$dir ] ; then \
+			(cd $$dir && $(MAKE) install) || exit 1 ; \
+		fi \
 	done
 
+
 # DirectFBGL module installation
 linux-directfb-install:
 	cd src/mesa/drivers/directfb && $(MAKE) install
@@ -92,6 +99,7 @@ linux-alpha-static \
 linux-debug \
 linux-directfb \
 linux-dri \
+linux-dri-debug \
 linux-dri-x86 \
 linux-dri-x86-64 \
 linux-dri-ppc \
@@ -154,10 +162,10 @@ ultrix-gcc:
 
 # Rules for making release tarballs
 
-DIRECTORY = Mesa-6.5.2
-LIB_NAME = MesaLib-6.5.2
-DEMO_NAME = MesaDemos-6.5.2
-GLUT_NAME = MesaGLUT-6.5.2
+DIRECTORY = Mesa-7.0
+LIB_NAME = MesaLib-7.0
+DEMO_NAME = MesaDemos-7.0
+GLUT_NAME = MesaGLUT-7.0
 
 MAIN_FILES = \
 	$(DIRECTORY)/Makefile*						\
@@ -208,9 +216,6 @@ MAIN_FILES = \
 	$(DIRECTORY)/src/mesa/glapi/*.[chS]				\
 	$(DIRECTORY)/src/mesa/glapi/descrip.mms				\
 	$(DIRECTORY)/src/mesa/glapi/sources				\
-	$(DIRECTORY)/src/mesa/array_cache/*.[ch]			\
-	$(DIRECTORY)/src/mesa/array_cache/descrip.mms			\
-	$(DIRECTORY)/src/mesa/array_cache/sources			\
 	$(DIRECTORY)/src/mesa/math/*.[ch]				\
 	$(DIRECTORY)/src/mesa/math/descrip.mms				\
 	$(DIRECTORY)/src/mesa/math/sources				\
@@ -224,12 +229,17 @@ MAIN_FILES = \
 	$(DIRECTORY)/src/mesa/shader/slang/descrip.mms			\
 	$(DIRECTORY)/src/mesa/shader/slang/sources			\
 	$(DIRECTORY)/src/mesa/shader/slang/library/*.[ch]		\
+	$(DIRECTORY)/src/mesa/shader/slang/library/*.gc			\
+	$(DIRECTORY)/src/mesa/shader/slang/library/*.syn		\
+	$(DIRECTORY)/src/mesa/shader/slang/library/Makefile		\
 	$(DIRECTORY)/src/mesa/swrast/*.[ch]				\
 	$(DIRECTORY)/src/mesa/swrast/descrip.mms			\
 	$(DIRECTORY)/src/mesa/swrast/sources				\
 	$(DIRECTORY)/src/mesa/swrast_setup/*.[ch]			\
 	$(DIRECTORY)/src/mesa/swrast_setup/descrip.mms			\
 	$(DIRECTORY)/src/mesa/swrast_setup/sources			\
+	$(DIRECTORY)/src/mesa/vbo/*.[chS]				\
+	$(DIRECTORY)/src/mesa/vbo/descrip.mms				\
 	$(DIRECTORY)/src/mesa/tnl/*.[chS]				\
 	$(DIRECTORY)/src/mesa/tnl/descrip.mms				\
 	$(DIRECTORY)/src/mesa/tnl/sources				\
@@ -288,7 +298,16 @@ MAIN_FILES = \
 	$(DIRECTORY)/windows/VC7/mesa/glu/glu.vcproj			\
 	$(DIRECTORY)/windows/VC7/mesa/mesa.sln				\
 	$(DIRECTORY)/windows/VC7/mesa/mesa/mesa.vcproj			\
-	$(DIRECTORY)/windows/VC7/mesa/osmesa/osmesa.vcproj
+	$(DIRECTORY)/windows/VC7/mesa/osmesa/osmesa.vcproj		\
+	$(DIRECTORY)/windows/VC8/mesa/mesa.sln				\
+	$(DIRECTORY)/windows/VC8/mesa/gdi/gdi.vcproj			\
+	$(DIRECTORY)/windows/VC8/mesa/glu/glu.vcproj			\
+	$(DIRECTORY)/windows/VC8/mesa/mesa/mesa.vcproj			\
+	$(DIRECTORY)/windows/VC8/mesa/osmesa/osmesa.vcproj		\
+	$(DIRECTORY)/windows/VC8/progs/progs.sln			\
+	$(DIRECTORY)/windows/VC8/progs/demos/gears.vcproj		\
+	$(DIRECTORY)/windows/VC8/progs/glut/glut.vcproj
+
 
 DRI_FILES = \
 	$(DIRECTORY)/include/GL/internal/dri_interface.h		\
@@ -364,6 +383,9 @@ DEMO_FILES = \
 	$(DIRECTORY)/progs/samples/Makefile*		\
 	$(DIRECTORY)/progs/samples/README		\
 	$(DIRECTORY)/progs/samples/*.c			\
+	$(DIRECTORY)/progs/glsl/Makefile*		\
+	$(DIRECTORY)/progs/glsl/*.c			\
+	$(DIRECTORY)/progs/glsl/*.txt			\
 	$(DIRECTORY)/progs/windml/Makefile.ugl		\
 	$(DIRECTORY)/progs/windml/*.c			\
 	$(DIRECTORY)/progs/windml/*.bmp			\

Makefile.orig

@@ -1,453 +0,0 @@
-# Top-level Mesa makefile
-
-TOP = .
-
-SUBDIRS = src progs
-
-
-default: $(TOP)/configs/current
-	@for dir in $(SUBDIRS) ; do \
-		(cd $$dir ; $(MAKE)) || exit 1 ; \
-	done
-
-
-doxygen:
-	(cd doxygen ; make) ; \
-
-clean:
-	@for dir in $(SUBDIRS) ; do \
-		(cd $$dir ; $(MAKE) clean) ; \
-	done
-
-
-realclean:
-	touch $(TOP)/configs/current
-	$(MAKE) clean
-	-rm -rf lib*
-	-rm -f $(TOP)/configs/current
-	-rm -f `find . -name \*.o`
-	-rm -f `find . -name \*.a`
-	-rm -f `find . -name \*.so`
-	-rm -f `find . -name depend`
-
-
-
-install:
-	@echo "Installing"
-	$(TOP)/bin/installmesa $(DESTDIR)
-
-# DirectFBGL module installation
-linux-directfb-install:
-	cd src/mesa/drivers/directfb && $(MAKE) install
-
-# If there's no current configuration file
-$(TOP)/configs/current:
-	@echo
-	@echo
-	@echo "Please choose a configuration from the following list:"
-	@ls -1 $(TOP)/configs | grep -v "current\|default\|CVS"
-	@echo
-	@echo "Then type 'make <config>' (ex: 'make linux-x86')"
-	@echo "(ignore the following error message)"
-	@exit 1
-
-
-# Rules to set/install a specific build configuration
-aix \
-aix-64 \
-aix-gcc \
-aix-static \
-beos \
-darwin \
-darwin-static \
-freebsd \
-freebsd-dri \
-freebsd-dri-amd64 \
-freebsd-dri-x86 \
-hpux10 \
-hpux10-gcc \
-hpux10-static \
-hpux11-32 \
-hpux11-32-static \
-hpux11-32-static-nothreads \
-hpux11-64 \
-hpux11-64-static \
-hpux9 \
-hpux9-gcc \
-irix6-64 \
-irix6-64-static \
-irix6-n32 \
-irix6-n32-static \
-irix6-o32 \
-irix6-o32-static \
-linux \
-linux-alpha \
-linux-alpha-static \
-linux-debug \
-linux-directfb \
-linux-dri \
-linux-dri-x86 \
-linux-dri-x86-64 \
-linux-dri-ppc \
-linux-dri-xcb \
-linux-indirect \
-linux-fbdev \
-linux-glide \
-linux-icc \
-linux-icc-static \
-linux-osmesa16 \
-linux-osmesa16-static \
-linux-osmesa32 \
-linux-ppc \
-linux-ppc-static \
-linux-solo \
-linux-solo-x86 \
-linux-solo-ia64 \
-linux-sparc \
-linux-sparc5 \
-linux-static \
-linux-ultrasparc \
-linux-tcc \
-linux-x86 \
-linux-x86-debug \
-linux-x86-32 \
-linux-x86-64 \
-linux-x86-64-debug \
-linux-x86-64-static \
-linux-x86-glide \
-linux-x86-static \
-netbsd \
-openbsd \
-osf1 \
-solaris-x86 \
-solaris-x86-gcc \
-sunos4 \
-sunos4-gcc \
-sunos4-static \
-sunos5 \
-sunos5-gcc \
-sunos5-64-gcc \
-sunos5-smp \
-ultrix-gcc:
-	(cd configs && rm -f current && ln -s $@ current)
-	$(MAKE) default
-
-
-# Rules for making release tarballs
-
-DIRECTORY = Mesa-6.5.1
-LIB_NAME = MesaLib-6.5.1
-DEMO_NAME = MesaDemos-6.5.1
-GLUT_NAME = MesaGLUT-6.5.1
-
-MAIN_FILES = \
-	$(DIRECTORY)/Makefile*						\
-	$(DIRECTORY)/descrip.mms					\
-	$(DIRECTORY)/mms-config.					\
-	$(DIRECTORY)/bin/mklib						\
-	$(DIRECTORY)/bin/installmesa					\
-	$(DIRECTORY)/configs/[a-z]*					\
-	$(DIRECTORY)/docs/*.html					\
-	$(DIRECTORY)/docs/COPYING					\
-	$(DIRECTORY)/docs/README.*					\
-	$(DIRECTORY)/docs/RELNOTES*					\
-	$(DIRECTORY)/docs/VERSIONS					\
-	$(DIRECTORY)/docs/*.spec					\
-	$(DIRECTORY)/include/GL/internal/glcore.h			\
-	$(DIRECTORY)/include/GL/amesa.h					\
-	$(DIRECTORY)/include/GL/dmesa.h					\
-	$(DIRECTORY)/include/GL/directfbgl.h				\
-	$(DIRECTORY)/include/GL/fxmesa.h				\
-	$(DIRECTORY)/include/GL/ggimesa.h				\
-	$(DIRECTORY)/include/GL/gl.h					\
-	$(DIRECTORY)/include/GL/glext.h					\
-	$(DIRECTORY)/include/GL/gl_mangle.h				\
-	$(DIRECTORY)/include/GL/glu.h					\
-	$(DIRECTORY)/include/GL/glu_mangle.h				\
-	$(DIRECTORY)/include/GL/glx.h					\
-	$(DIRECTORY)/include/GL/glxext.h				\
-	$(DIRECTORY)/include/GL/glx_mangle.h				\
-	$(DIRECTORY)/include/GL/glfbdev.h				\
-	$(DIRECTORY)/include/GL/mesa_wgl.h				\
-	$(DIRECTORY)/include/GL/mglmesa.h				\
-	$(DIRECTORY)/include/GL/osmesa.h				\
-	$(DIRECTORY)/include/GL/svgamesa.h				\
-	$(DIRECTORY)/include/GL/ugl*.h					\
-	$(DIRECTORY)/include/GL/vms_x_fix.h				\
-	$(DIRECTORY)/include/GL/wmesa.h					\
-	$(DIRECTORY)/include/GL/xmesa.h					\
-	$(DIRECTORY)/include/GL/xmesa_x.h				\
-	$(DIRECTORY)/include/GL/xmesa_xf86.h				\
-	$(DIRECTORY)/include/GLView.h					\
-	$(DIRECTORY)/src/Makefile					\
-	$(DIRECTORY)/src/descrip.mms					\
-	$(DIRECTORY)/src/mesa/Makefile*					\
-	$(DIRECTORY)/src/mesa/sources					\
-	$(DIRECTORY)/src/mesa/descrip.mms				\
-	$(DIRECTORY)/src/mesa/depend					\
-	$(DIRECTORY)/src/mesa/main/*.[chS]				\
-	$(DIRECTORY)/src/mesa/main/descrip.mms				\
-	$(DIRECTORY)/src/mesa/glapi/*.[chS]				\
-	$(DIRECTORY)/src/mesa/glapi/descrip.mms				\
-	$(DIRECTORY)/src/mesa/array_cache/*.[ch]			\
-	$(DIRECTORY)/src/mesa/array_cache/descrip.mms			\
-	$(DIRECTORY)/src/mesa/math/*.[ch]				\
-	$(DIRECTORY)/src/mesa/math/descrip.mms				\
-	$(DIRECTORY)/src/mesa/shader/*.[ch]				\
-	$(DIRECTORY)/src/mesa/shader/descrip.mms			\
-	$(DIRECTORY)/src/mesa/shader/grammar/*.[ch]			\
-	$(DIRECTORY)/src/mesa/shader/grammar/descrip.mms		\
-	$(DIRECTORY)/src/mesa/shader/slang/*.[ch]			\
-	$(DIRECTORY)/src/mesa/shader/slang/descrip.mms			\
-	$(DIRECTORY)/src/mesa/shader/slang/library/*.[ch]		\
-	$(DIRECTORY)/src/mesa/swrast/*.[ch]				\
-	$(DIRECTORY)/src/mesa/swrast/descrip.mms			\
-	$(DIRECTORY)/src/mesa/swrast_setup/*.[ch]			\
-	$(DIRECTORY)/src/mesa/swrast_setup/descrip.mms			\
-	$(DIRECTORY)/src/mesa/tnl/*.[chS]				\
-	$(DIRECTORY)/src/mesa/tnl/descrip.mms				\
-	$(DIRECTORY)/src/mesa/tnl_dd/*.[ch]				\
-	$(DIRECTORY)/src/mesa/tnl_dd/imm/*.[ch]				\
-	$(DIRECTORY)/src/mesa/tnl_dd/imm/NOTES.imm			\
-	$(DIRECTORY)/src/mesa/drivers/beos/*.cpp			\
-	$(DIRECTORY)/src/mesa/drivers/beos/Makefile			\
-	$(DIRECTORY)/src/mesa/drivers/common/*.[ch]			\
-	$(DIRECTORY)/src/mesa/drivers/common/descrip.mms		\
-	$(DIRECTORY)/src/mesa/drivers/directfb/*.[ch]			\
-	$(DIRECTORY)/src/mesa/drivers/directfb/Makefile			\
-	$(DIRECTORY)/src/mesa/drivers/dos/*.[chS]			\
-	$(DIRECTORY)/src/mesa/drivers/fbdev/glfbdev.c			\
-	$(DIRECTORY)/src/mesa/drivers/glide/*.[ch]			\
-	$(DIRECTORY)/src/mesa/drivers/ggi/*.[ch]			\
-	$(DIRECTORY)/src/mesa/drivers/ggi/ggimesa.conf.in		\
-	$(DIRECTORY)/src/mesa/drivers/ggi/default/*.c			\
-	$(DIRECTORY)/src/mesa/drivers/ggi/default/genkgi.conf.in	\
-	$(DIRECTORY)/src/mesa/drivers/ggi/display/*.c			\
-	$(DIRECTORY)/src/mesa/drivers/ggi/display/fbdev.conf.in		\
-	$(DIRECTORY)/src/mesa/drivers/ggi/include/ggi/mesa/*.h		\
-	$(DIRECTORY)/src/mesa/drivers/osmesa/Makefile.win		\
-	$(DIRECTORY)/src/mesa/drivers/osmesa/descrip.mms		\
-	$(DIRECTORY)/src/mesa/drivers/osmesa/osmesa.def			\
-	$(DIRECTORY)/src/mesa/drivers/osmesa/*.[ch]			\
-	$(DIRECTORY)/src/mesa/drivers/svga/*.[ch]			\
-	$(DIRECTORY)/src/mesa/drivers/windows/*/*.[ch]			\
-	$(DIRECTORY)/src/mesa/drivers/windows/*/*.def			\
-	$(DIRECTORY)/src/mesa/drivers/x11/descrip.mms			\
-	$(DIRECTORY)/src/mesa/drivers/x11/*.[ch]			\
-	$(DIRECTORY)/src/mesa/ppc/*.[ch]				\
-	$(DIRECTORY)/src/mesa/sparc/*.[chS]				\
-	$(DIRECTORY)/src/mesa/x86/Makefile				\
-	$(DIRECTORY)/src/mesa/x86/*.[ch]				\
-	$(DIRECTORY)/src/mesa/x86/*.S					\
-	$(DIRECTORY)/src/mesa/x86/rtasm/*.[ch]				\
-	$(DIRECTORY)/src/mesa/x86-64/*.[chS]				\
-	$(DIRECTORY)/src/mesa/x86-64/Makefile				\
-	$(DIRECTORY)/progs/Makefile					\
-	$(DIRECTORY)/progs/util/README					\
-	$(DIRECTORY)/progs/util/*.[ch]					\
-	$(DIRECTORY)/progs/util/sampleMakefile				\
-	$(DIRECTORY)/vms/analyze_map.com				\
-	$(DIRECTORY)/vms/xlib.opt					\
-	$(DIRECTORY)/vms/xlib_share.opt					\
-	$(DIRECTORY)/windows/VC6/mesa/gdi/gdi.dsp			\
-	$(DIRECTORY)/windows/VC6/mesa/glu/*.txt				\
-	$(DIRECTORY)/windows/VC6/mesa/glu/glu.dsp			\
-	$(DIRECTORY)/windows/VC6/mesa/mesa.dsw				\
-	$(DIRECTORY)/windows/VC6/mesa/mesa/mesa.dsp			\
-	$(DIRECTORY)/windows/VC6/mesa/osmesa/osmesa.dsp			\
-	$(DIRECTORY)/windows/VC7/mesa/gdi/gdi.vcproj			\
-	$(DIRECTORY)/windows/VC7/mesa/glu/glu.vcproj			\
-	$(DIRECTORY)/windows/VC7/mesa/mesa.sln				\
-	$(DIRECTORY)/windows/VC7/mesa/mesa/mesa.vcproj			\
-	$(DIRECTORY)/windows/VC7/mesa/osmesa/osmesa.vcproj
-
-DRI_FILES = \
-	$(DIRECTORY)/include/GL/internal/dri_interface.h		\
-	$(DIRECTORY)/include/GL/internal/sarea.h			\
-	$(DIRECTORY)/src/glx/Makefile					\
-	$(DIRECTORY)/src/glx/x11/Makefile				\
-	$(DIRECTORY)/src/glx/x11/*.[ch]					\
-	$(DIRECTORY)/src/mesa/drivers/dri/Makefile			\
-	$(DIRECTORY)/src/mesa/drivers/dri/Makefile.template		\
-	$(DIRECTORY)/src/mesa/drivers/dri/common/xmlpool/*.[ch]		\
-	$(DIRECTORY)/src/mesa/drivers/dri/common/xmlpool/*.po		\
-	$(DIRECTORY)/src/mesa/drivers/dri/*/*.[chS]			\
-	$(DIRECTORY)/src/mesa/drivers/dri/*/Makefile			\
-	$(DIRECTORY)/src/mesa/drivers/dri/*/Doxyfile			\
-	$(DIRECTORY)/src/mesa/drivers/dri/*/server/*.[ch]
-
-SGI_GLU_FILES = \
-	$(DIRECTORY)/src/glu/Makefile					\
-	$(DIRECTORY)/src/glu/descrip.mms				\
-	$(DIRECTORY)/src/glu/sgi/Makefile				\
-	$(DIRECTORY)/src/glu/sgi/Makefile.win				\
-	$(DIRECTORY)/src/glu/sgi/Makefile.DJ				\
-	$(DIRECTORY)/src/glu/sgi/glu.def				\
-	$(DIRECTORY)/src/glu/sgi/dummy.cc				\
-	$(DIRECTORY)/src/glu/sgi/descrip.mms				\
-	$(DIRECTORY)/src/glu/sgi/mesaglu.opt				\
-	$(DIRECTORY)/src/glu/sgi/include/gluos.h			\
-	$(DIRECTORY)/src/glu/sgi/libnurbs/interface/*.h			\
-	$(DIRECTORY)/src/glu/sgi/libnurbs/interface/*.cc		\
-	$(DIRECTORY)/src/glu/sgi/libnurbs/internals/*.h			\
-	$(DIRECTORY)/src/glu/sgi/libnurbs/internals/*.cc		\
-	$(DIRECTORY)/src/glu/sgi/libnurbs/nurbtess/*.h			\
-	$(DIRECTORY)/src/glu/sgi/libnurbs/nurbtess/*.cc			\
-	$(DIRECTORY)/src/glu/sgi/libtess/README				\
-	$(DIRECTORY)/src/glu/sgi/libtess/alg-outline			\
-	$(DIRECTORY)/src/glu/sgi/libtess/*.[ch]				\
-	$(DIRECTORY)/src/glu/sgi/libutil/*.[ch]
-
-MESA_GLU_FILES = \
-	$(DIRECTORY)/src/glu/mesa/README[12]		\
-	$(DIRECTORY)/src/glu/mesa/Makefile*		\
-	$(DIRECTORY)/src/glu/mesa/descrip.mms		\
-	$(DIRECTORY)/src/glu/mesa/mms_depend		\
-	$(DIRECTORY)/src/glu/mesa/*.def			\
-	$(DIRECTORY)/src/glu/mesa/depend		\
-	$(DIRECTORY)/src/glu/mesa/*.[ch]
-
-GLW_FILES = \
-	$(DIRECTORY)/src/glw/*.[ch]			\
-	$(DIRECTORY)/src/glw/Makefile*			\
-	$(DIRECTORY)/src/glw/README			\
-	$(DIRECTORY)/src/glw/depend
-
-DEMO_FILES = \
-	$(DIRECTORY)/progs/beos/*.cpp			\
-	$(DIRECTORY)/progs/beos/Makefile		\
-	$(DIRECTORY)/progs/images/*.rgb			\
-	$(DIRECTORY)/progs/images/*.rgba		\
-	$(DIRECTORY)/progs/demos/Makefile*		\
-	$(DIRECTORY)/progs/demos/descrip.mms		\
-	$(DIRECTORY)/progs/demos/*.[ch]			\
-	$(DIRECTORY)/progs/demos/*.cxx			\
-	$(DIRECTORY)/progs/demos/*.dat			\
-	$(DIRECTORY)/progs/demos/README			\
-	$(DIRECTORY)/progs/osdemos/Makefile		\
-	$(DIRECTORY)/progs/osdemos/*.c			\
-	$(DIRECTORY)/progs/xdemos/Makefile*		\
-	$(DIRECTORY)/progs/xdemos/descrip.mms		\
-	$(DIRECTORY)/progs/xdemos/*.[chf]		\
-	$(DIRECTORY)/progs/redbook/Makefile*		\
-	$(DIRECTORY)/progs/redbook/README		\
-	$(DIRECTORY)/progs/redbook/*.[ch]		\
-	$(DIRECTORY)/progs/samples/Makefile*		\
-	$(DIRECTORY)/progs/samples/README		\
-	$(DIRECTORY)/progs/samples/*.c			\
-	$(DIRECTORY)/progs/windml/Makefile.ugl		\
-	$(DIRECTORY)/progs/windml/*.c			\
-	$(DIRECTORY)/progs/windml/*.bmp			\
-	$(DIRECTORY)/progs/ggi/*.c			\
-	$(DIRECTORY)/windows/VC6/progs/demos/*.dsp	\
-	$(DIRECTORY)/windows/VC6/progs/progs.dsw	\
-	$(DIRECTORY)/windows/VC7/progs/demos/*.vcproj	\
-	$(DIRECTORY)/windows/VC7/progs/progs.sln
-
-GLUT_FILES = \
-	$(DIRECTORY)/include/GL/glut.h			\
-	$(DIRECTORY)/include/GL/glutf90.h		\
-	$(DIRECTORY)/src/glut/glx/Makefile*		\
-	$(DIRECTORY)/src/glut/glx/depend		\
-	$(DIRECTORY)/src/glut/glx/*def			\
-	$(DIRECTORY)/src/glut/glx/descrip.mms		\
-	$(DIRECTORY)/src/glut/glx/mms_depend		\
-	$(DIRECTORY)/src/glut/glx/*.[ch]		\
-	$(DIRECTORY)/src/glut/beos/*.[ch]		\
-	$(DIRECTORY)/src/glut/beos/*.cpp		\
-	$(DIRECTORY)/src/glut/beos/Makefile		\
-	$(DIRECTORY)/src/glut/dos/*.[ch]		\
-	$(DIRECTORY)/src/glut/dos/Makefile.DJ		\
-	$(DIRECTORY)/src/glut/dos/PC_HW/*.[chS]		\
-	$(DIRECTORY)/src/glut/ggi/*.[ch]		\
-	$(DIRECTORY)/src/glut/ggi/Makefile		\
-	$(DIRECTORY)/windows/VC6/progs/glut/glut.dsp	\
-	$(DIRECTORY)/windows/VC7/progs/glut/glut.vcproj
-
-DEPEND_FILES = \
-	$(TOP)/src/mesa/depend		\
-	$(TOP)/src/glw/depend		\
-	$(TOP)/src/glut/glx/depend	\
-	$(TOP)/src/glu/sgi/depend
-
-
-LIB_FILES = $(MAIN_FILES) $(DRI_FILES) $(SGI_GLU_FILES) $(GLW_FILES)
-
-
-# Everything for new a Mesa release:
-tarballs: rm_depend lib_gz demo_gz glut_gz lib_bz2 demo_bz2 glut_bz2 lib_zip demo_zip glut_zip md5
-
-
-rm_depend:
-	@for dep in $(DEPEND_FILES) ; do \
-		rm -f $$dep ; \
-		touch $$dep ; \
-	done
-
-lib_gz:
-	rm -f configs/current ; \
-	cd .. ; \
-	tar -cf $(LIB_NAME).tar $(LIB_FILES) ; \
-	gzip $(LIB_NAME).tar ; \
-	mv $(LIB_NAME).tar.gz $(DIRECTORY)
-
-demo_gz:
-	cd .. ; \
-	tar -cf $(DEMO_NAME).tar $(DEMO_FILES) ; \
-	gzip $(DEMO_NAME).tar ; \
-	mv $(DEMO_NAME).tar.gz $(DIRECTORY)
-
-glut_gz:
-	cd .. ; \
-	tar -cf $(GLUT_NAME).tar $(GLUT_FILES) ; \
-	gzip $(GLUT_NAME).tar ; \
-	mv $(GLUT_NAME).tar.gz $(DIRECTORY)
-
-lib_bz2:
-	rm -f configs/current ; \
-	cd .. ; \
-	tar -cf $(LIB_NAME).tar $(LIB_FILES) ; \
-	bzip2 $(LIB_NAME).tar ; \
-	mv $(LIB_NAME).tar.bz2 $(DIRECTORY)
-
-demo_bz2:
-	cd .. ; \
-	tar -cf $(DEMO_NAME).tar $(DEMO_FILES) ; \
-	bzip2 $(DEMO_NAME).tar ; \
-	mv $(DEMO_NAME).tar.bz2 $(DIRECTORY)
-
-glut_bz2:
-	cd .. ; \
-	tar -cf $(GLUT_NAME).tar $(GLUT_FILES) ; \
-	bzip2 $(GLUT_NAME).tar ; \
-	mv $(GLUT_NAME).tar.bz2 $(DIRECTORY)
-
-lib_zip:
-	rm -f configs/current ; \
-	rm -f $(LIB_NAME).zip ; \
-	cd .. ; \
-	zip -qr $(LIB_NAME).zip $(LIB_FILES) ; \
-	mv $(LIB_NAME).zip $(DIRECTORY)
-
-demo_zip:
-	rm -f $(DEMO_NAME).zip ; \
-	cd .. ; \
-	zip -qr $(DEMO_NAME).zip $(DEMO_FILES) ; \
-	mv $(DEMO_NAME).zip $(DIRECTORY)
-
-glut_zip:
-	rm -f $(GLUT_NAME).zip ; \
-	cd .. ; \
-	zip -qr $(GLUT_NAME).zip $(GLUT_FILES) ; \
-	mv $(GLUT_NAME).zip $(DIRECTORY)
-
-md5:
-	@-md5sum $(LIB_NAME).tar.gz
-	@-md5sum $(LIB_NAME).tar.bz2
-	@-md5sum $(LIB_NAME).zip
-	@-md5sum $(DEMO_NAME).tar.gz
-	@-md5sum $(DEMO_NAME).tar.bz2
-	@-md5sum $(DEMO_NAME).zip
-	@-md5sum $(GLUT_NAME).tar.gz
-	@-md5sum $(GLUT_NAME).tar.bz2
-	@-md5sum $(GLUT_NAME).zip

bin/minstall

@@ -65,6 +65,7 @@ if [ $# -ge 2 ] ; then
 
 		elif [ -f "$FILE" ] ; then
 			#echo "$FILE" is a regular file
+			$RM "$DEST/`basename $FILE`"
 			cp "$FILE" "$DEST"
 			if [ $MODE ] ; then
 				FILE=`basename "$FILE"`

bin/mklib

@@ -100,6 +100,14 @@ do
 	-L*)
 	    DEPS="$DEPS $1"
 	    ;;
+	-pthread)
+	    # this is a special case (see bugzilla 10876)
+	    DEPS="$DEPS $1"
+	    ;;
+	'-pthread')
+	    # for FreeBSD
+	    DEPS="$DEPS -pthread"
+	    ;;
 	'-cplusplus')
 	    CPLUSPLUS=1
 	    ;;
@@ -212,15 +220,16 @@ case $ARCH in
             # finish up
             FINAL_LIBS="${LIBNAME}"
         elif [ $STATIC = 1 ] ; then
-	    LIBNAME="lib${LIBNAME}"     # prefix with "lib"
-            echo "mklib: Making" $ARCH "static library: " ${LIBNAME}.a
+            LIBNAME="lib${LIBNAME}.a"     # prefix with "lib", suffix with ".a"
+            echo "mklib: Making" $ARCH "static library: " ${LIBNAME}
             LINK="ar"
             OPTS="-ru"
+            rm -f ${LIBNAME}
             # make lib
-            ${LINK} ${OPTS} ${LIBNAME}.a ${OBJECTS}
-	    ranlib ${LIBNAME}.a
+            ${LINK} ${OPTS} ${LIBNAME} ${OBJECTS}
+            ranlib ${LIBNAME}
             # finish up
-            FINAL_LIBS=${LIBNAME}.a
+            FINAL_LIBS=${LIBNAME}
         else
 	    LIBNAME="lib${LIBNAME}"     # prefix with "lib"
 	    case $ARCH in 'Linux' | 'GNU' | GNU/*)

configs/.gitignore

@@ -0,0 +1 @@
+current

configs/debian-default

@@ -1,18 +0,0 @@
-# Define Debian-specific defaults.
-
-CONFIG_NAME = debian-default
-
-OPT_FLAGS = -O2 -g
-CFLAGS += -fno-strict-aliasing
-
-# override settings in configs/linux-x86-64
-LIB_DIR = lib
-EXTRA_LIB_PATH =
-
-SRC_DIRS = mesa
-PROGRAM_DIRS =
-
-INSTALL_DIR = $(DESTDIR)/usr
-
-# vim: ft=make
-

configs/debian-dri-amd64

@@ -1,9 +0,0 @@
-# Configuration for building the DRI drivers on i386.
-
-include $(TOP)/configs/linux-dri-x86-64
-include $(TOP)/configs/debian-dri-default
-
-CONFIG_NAME = debian-dri-amd64
-
-# vim: ft=make
-

configs/debian-dri-any

@@ -1,9 +0,0 @@
-# Configuration for building the DRI drivers on the build architecture.
-
-include $(TOP)/configs/linux-dri
-include $(TOP)/configs/debian-dri-default
-
-CONFIG_NAME = debian-dri-any
-
-# vim: ft=make
-

configs/debian-dri-default

@@ -1,36 +0,0 @@
-# Configuration defaults for building the DRI drivers and DRI/GLX-enabled
-# libGL.
-
-include $(TOP)/configs/debian-default
-
-CONFIG_NAME = debian-dri-default
-
-SRC_DIRS = glx/x11 mesa progs
-DRIVER_DIRS = dri
-PROGRAM_DIRS = xdemos
-PROGS = glxdemo \
-        glxgears \
-        glxheads \
-        glxinfo
-
-LIB_DIR = lib/glx
-
-DRI_DRIVER_INSTALL_DIR = $(INSTALL_DIR)/lib/dri
-DRI_DRIVER_SEARCH_DIR = /usr/lib/dri
-
-DRI_DIRS = mach64 mga r128 r200 r300 radeon s3v savage tdfx trident
-
-ARCH_X86 = i386 amd64
-
-ifneq ($(findstring $(DEB_BUILD_ARCH), $(ARCH_X86)),)
-	DRI_DIRS += i810 i915 i915tex i965 sis unichrome
-endif
-
-ifeq ($(DEB_BUILD_ARCH), sparc)
-	DRI_DIRS += ffb
-endif
-
-APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB)
-
-# vim: ft=make
-

configs/debian-dri-i386

@@ -1,9 +0,0 @@
-# Configuration for building the DRI drivers on i386.
-
-include $(TOP)/configs/linux-dri-x86
-include $(TOP)/configs/debian-dri-default
-
-CONFIG_NAME = debian-dri-i386
-
-# vim: ft=make
-

configs/debian-dri-i386-i686

@@ -1,14 +0,0 @@
-# Configuration for building the DRI drivers on i386.
-
-include $(TOP)/configs/linux-dri-x86
-include $(TOP)/configs/debian-dri-optimized-default
-
-CONFIG_NAME = debian-dri-i386-i686
-
-ARCH_FLAGS = -march=i686
-LIB_DIR = lib/glx/i686/cmov
-
-DRI_DRIVER_INSTALL_DIR = $(INSTALL_DIR)/lib/dri/i686/cmov
-
-# vim: ft=make
-

configs/debian-dri-optimized-default

@@ -1,13 +0,0 @@
-# Configuration defaults for CPU-optimized builds of the DRI drivers and
-# DRI/GLX-enabled libGL.
-
-include $(TOP)/configs/debian-dri-default
-
-CONFIG_NAME = debian-dri-optimized-default
-
-# override so that the utility programs are not rebuilt with CPU-specific
-# optimizations
-SRC_DIRS = glx/x11 mesa
-
-# vim: ft=make
-

configs/debian-indirect-default

@@ -1,7 +0,0 @@
-# Configuration defaults for building GLX-enabled libGL.
-
-include $(TOP)/configs/debian-dri-default
-
-CONFIG_NAME = debian-indirect-default
-
-DRI_DIRS = 

configs/debian-indirect-hurd-i386

@@ -1,9 +0,0 @@
-# Configuration for building the DRI drivers on the build architecture.
-
-include $(TOP)/configs/linux-indirect
-include $(TOP)/configs/debian-indirect-default
-
-CONFIG_NAME = debian-indirect-hurd-i386
-
-# vim: ft=make
-

configs/debian-osmesa

@@ -1,9 +0,0 @@
-# Configuration for building only OSMesa on Debian.
-
-include $(TOP)/configs/linux-osmesa
-include $(TOP)/configs/debian-osmesa-default
-
-CONFIG_NAME = debian-osmesa
-
-# vim: ft=make
-

configs/debian-osmesa-default

@@ -1,10 +0,0 @@
-# Configuration defaults for building OSMesa.
-
-include $(TOP)/configs/debian-default
-
-CONFIG_NAME = debian-osmesa-default
-
-DRIVER_DIRS = osmesa
-
-# vim: ft=make
-

configs/debian-osmesa-static

@@ -1,9 +0,0 @@
-# Configuration for building only OSMesa (static version) on Debian.
-
-include $(TOP)/configs/linux-osmesa-static
-include $(TOP)/configs/debian-osmesa-default
-
-CONFIG_NAME = debian-osmesa-static
-
-# vim: ft=make
-

configs/debian-osmesa16

@@ -1,10 +0,0 @@
-# Configuration for building OSMesa with support for 16 bits per color
-# channel.
-
-include $(TOP)/configs/linux-osmesa16
-include $(TOP)/configs/debian-osmesa-default
-
-CONFIG_NAME = debian-osmesa16
-
-# vim: ft=make
-

configs/debian-osmesa16-static

@@ -1,10 +0,0 @@
-# Configuration for building a static version of OSMesa with support for 16
-# bits per color channel.
-
-include $(TOP)/configs/linux-osmesa16-static
-include $(TOP)/configs/debian-osmesa-default
-
-CONFIG_NAME = debian-osmesa16-static
-
-# vim: ft=make
-

configs/debian-osmesa32

@@ -1,10 +0,0 @@
-# Configuration for building OSMesa with support for 32 bits per color
-# channel.
-
-include $(TOP)/configs/linux-osmesa32
-include $(TOP)/configs/debian-osmesa-default
-
-CONFIG_NAME = debian-osmesa32
-
-# vim: ft=make
-

configs/debian-osmesa32-static

@@ -1,10 +0,0 @@
-# Configuration for building a static version of OSMesa with support for 32
-# bits per color channel.
-
-include $(TOP)/configs/linux-osmesa32-static
-include $(TOP)/configs/debian-osmesa-default
-
-CONFIG_NAME = debian-osmesa32-static
-
-# vim: ft=make
-

configs/debian-swx11+glu-alpha-ev5

@@ -1,12 +0,0 @@
-# Configuration for building Mesa (swx11 and GLU) on alpha (ev5 optimized).
-
-include $(TOP)/configs/linux-alpha
-include $(TOP)/configs/debian-swx11+glu-default
-
-CONFIG_NAME = debian-swx11+glu-alpha-ev5
-
-SRC_DIRS = mesa
-LIB_DIR = lib/ev5/cmov
-
-# vim: ft=make
-

configs/debian-swx11+glu-amd64

@@ -1,10 +0,0 @@
-# Configuration for building Mesa (swx11 and GLU) with runtime-detected
-# assembler optimizations on amd64.
-
-include $(TOP)/configs/linux-x86-64
-include $(TOP)/configs/debian-swx11+glu-default
-
-CONFIG_NAME = debian-swx11+glu-amd64
-
-# vim: ft=make
-

configs/debian-swx11+glu-any

@@ -1,9 +0,0 @@
-# Configuration for building Mesa (swx11 and GLU) on the build architecture.
-
-include $(TOP)/configs/linux
-include $(TOP)/configs/debian-swx11+glu-default
-
-CONFIG_NAME = debian-swx11+glu-any
-
-# vim: ft=make
-

configs/debian-swx11+glu-default

@@ -1,14 +0,0 @@
-# Configuration defaults for building Mesa (swx11 and GLU).
-
-include $(TOP)/configs/debian-default
-
-CONFIG_NAME = debian-swx11+glu-default
-
-SRC_DIRS = mesa glu glw
-DRIVER_DIRS = x11
-
-GLW_SOURCES += GLwMDrawA.c
-GLW_LIB_DEPS += -lXm
-
-# vim: ft=make
-

configs/debian-swx11+glu-i386

@@ -1,10 +0,0 @@
-# Configuration for building Mesa (swx11 and GLU) with runtime-detected
-# assembler optimizations on i386.
-
-include $(TOP)/configs/linux-x86
-include $(TOP)/configs/debian-swx11+glu-default
-
-CONFIG_NAME = debian-swx11+glu-i386
-
-# vim: ft=make
-

configs/debian-swx11+glu-i386-i686

@@ -1,14 +0,0 @@
-# Configuration for building Mesa (swx11 and GLU) with runtime-detected
-# assembler optimizations on i386 (i686 optimized).
-
-include $(TOP)/configs/linux-x86
-include $(TOP)/configs/debian-swx11+glu-default
-
-CONFIG_NAME = debian-swx11+glu-i386-i686
-
-ARCH_FLAGS += -march=i686
-SRC_DIRS = mesa
-LIB_DIR = lib/i686/cmov
-
-# vim: ft=make
-

configs/debian-swx11+glu-powerpc-603

@@ -1,13 +0,0 @@
-# Configuration for building Mesa (swx11 and GLU) with runtime-detected
-# assembler optimizations on powerpc (603 optimized).
-
-include $(TOP)/configs/linux-ppc
-include $(TOP)/configs/debian-swx11+glu-default
-
-CONFIG_NAME = debian-swx11+glu-powerpc-603
-
-SRC_DIRS = mesa
-LIB_DIR = lib/603/cmov
-
-# vim: ft=make
-

configs/debian-swx11+glu-ppc64

@@ -1,11 +0,0 @@
-# Configuration for building Mesa (swx11 and GLU) with runtime-detected
-# assembler optimizations on ppc64.
-
-include $(TOP)/configs/debian-swx11+glu-any
-
-CONFIG_NAME = debian-swx11+glu-ppc64
-
-LIB_DIR = lib64
-
-# vim: ft=make
-

configs/debian-swx11+glu-sparc

@@ -1,10 +0,0 @@
-# Configuration for building Mesa (swx11 and GLU) with runtime-detected
-# assembler optimizations on sparc.
-
-include $(TOP)/configs/linux-sparc
-include $(TOP)/configs/debian-swx11+glu-default
-
-CONFIG_NAME = debian-swx11+glu-sparc
-
-# vim: ft=make
-

configs/debian-swx11+glu-sparc-ultrasparc

@@ -1,13 +0,0 @@
-# Configuration for building Mesa (swx11 and GLU) with runtime-detected
-# assembler optimizations on sparc (ultrasparc-optimized).
-
-include $(TOP)/configs/linux-ultrasparc
-include $(TOP)/configs/debian-swx11+glu-default
-
-CONFIG_NAME = debian-swx11+glu-sparc-ultrasparc
-
-SRC_DIRS = mesa
-LIB_DIR = lib/ultrasparc/cmov
-
-# vim: ft=make
-

configs/debian-swx11+glu-static-amd64

@@ -1,10 +0,0 @@
-# Configuration for building static versions of the libraries (swx11 and GLU)
-# on amd64.
-
-include $(TOP)/configs/linux-x86-64-static
-include $(TOP)/configs/debian-swx11+glu-default
-
-CONFIG_NAME = debian-swx11+glu-static-amd64
-
-# vim: ft=make
-

configs/debian-swx11+glu-static-any

@@ -1,10 +0,0 @@
-# Configuration for building static versions of the libraries (swx11 and GLU)
-# on the build architecture.
-
-include $(TOP)/configs/linux-static
-include $(TOP)/configs/debian-swx11+glu-default
-
-CONFIG_NAME = debian-swx11+glu-static-any
-
-# vim: ft=make
-

configs/debian-swx11+glu-static-i386

@@ -1,10 +0,0 @@
-# Configuration for building static versions of the libraries (swx11 and GLU)
-# on i386.
-
-include $(TOP)/configs/linux-x86-static
-include $(TOP)/configs/debian-swx11+glu-default
-
-CONFIG_NAME = debian-swx11+glu-static-i386
-
-# vim: ft=make
-

configs/debian-swx11+glu-static-ppc64

@@ -1,11 +0,0 @@
-# Configuration for building static versions of the libraries (swx11 and GLU)
-# on ppc64.
-
-include $(TOP)/configs/debian-swx11+glu-static-any
-
-CONFIG_NAME = debian-swx11+glu-static-ppc64
-
-LIB_DIR = lib64
-
-# vim: ft=make
-

configs/default

@@ -8,9 +8,9 @@
 CONFIG_NAME = default
 
 # Version info
-MESA_MAJOR=6
-MESA_MINOR=5
-MESA_TINY=2
+MESA_MAJOR=7
+MESA_MINOR=1
+MESA_TINY=0
 
 # external projects.  This should be useless now that we use libdrm.
 DRM_SOURCE_PATH=$(TOP)/../drm
@@ -63,7 +63,7 @@ SRC_DIRS = mesa glu glut/glx glw
 GLU_DIRS = sgi
 DRIVER_DIRS = x11 osmesa
 # Which subdirs under $(TOP)/progs/ to enter:
-PROGRAM_DIRS = demos redbook samples xdemos
+PROGRAM_DIRS = demos redbook samples glsl xdemos
 
 
 # Library/program dependencies

configs/default-bp

@@ -1,75 +0,0 @@
-# Default/template configuration
-
-# This is included by other config files which may override some
-# of these variables.
-
-CONFIG_NAME = default
-
-# Version info
-MESA_MAJOR=6
-MESA_MINOR=3
-MESA_TINY=0
-
-# external projects
-#DRM_SOURCE_PATH=$(TOP)/../drm
-DRM_SOURCE_PATH=/home/projects/DRI-freedesktop/drm
-
-# Compiler and flags
-CC = cc
-CXX = CC
-CFLAGS = -O
-CXXFLAGS = -O
-GLU_CFLAGS = 
-
-# Misc tools and flags
-MKLIB_OPTIONS = 
-MKDEP = makedepend
-MKDEP_OPTIONS = -fdepend
-MAKE = make
-
-# Library names (base name)
-GL_LIB = GL
-GLU_LIB = GLU
-GLUT_LIB = glut
-GLW_LIB = GLw
-OSMESA_LIB = OSMesa
-
-
-# Library names (actual file names)
-GL_LIB_NAME = lib$(GL_LIB).so
-GLU_LIB_NAME = lib$(GLU_LIB).so
-GLUT_LIB_NAME = lib$(GLUT_LIB).so
-GLW_LIB_NAME = lib$(GLW_LIB).so
-OSMESA_LIB_NAME = lib$(OSMesa).so
-
-
-# Optional assembly language optimization files for libGL
-ASM_SOURCES = 
-
-# GLw widget sources (Append "GLwMDrawA.c" here and add -lXm to GLW_LIB_DEPS in
-# order to build the Motif widget too)
-GLW_SOURCES = GLwDrawA.c
-
-
-# Directories
-LIB_DIR = $(TOP)/lib
-INSTALL_PREFIX = /usr/local
-SRC_DIRS = mesa glu glut/glx glw
-GLU_DIRS = sgi
-DRIVER_DIRS = x11 osmesa
-# Which subdirs under $(TOP)/progs/ to enter:
-PROGRAM_DIRS = demos redbook samples xdemos
-
-
-# Library/program dependencies
-GL_LIB_DEPS = -lX11 -lXext -lm -lpthread
-OSMESA_LIB_DEPS = -L$(LIB_DIR) -l$(GL_LIB)
-GLU_LIB_DEPS = -L$(LIB_DIR) -l$(GL_LIB) -lm
-GLUT_LIB_DEPS = -L$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -lX11 -lXmu -lXt -lXi -lm
-GLW_LIB_DEPS = -L$(LIB_DIR) -l$(GL_LIB) -lXt -lX11
-APP_LIB_DEPS = -L$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm
-
-
-# Shading language support (set to 0 or 1)
-SHADING_LANGUAGE = 0
-

configs/diffs

@@ -1,37 +0,0 @@
-? default-bp
-? diffs
-? linux-dri-bp
-? linux-tcc
-Index: linux-icc-static
-===================================================================
-RCS file: /cvs/mesa/Mesa/configs/linux-icc-static,v
-retrieving revision 1.4
-diff -r1.4 linux-icc-static
-9c9
-< CXX = g++
----
-> CXX = icpc
-11c11
-< CXXFLAGS = -O3
----
-> CXXFLAGS = -O3 -tpp6 -axK -DPTHREADS
-22,25c22,24
-< GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread
-< GLUT_LIB_DEPS = -L$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
-< APP_LIB_DEPS = -L$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
-< MKLIB_OPTIONS = -arch icc
----
-> GL_LIB_DEPS =
-> GLUT_LIB_DEPS =
-> APP_LIB_DEPS = -L$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm -lpthread -lcxa -lunwind
-29,30d27
-< 
-< 
-Index: linux-x86-64-static
-===================================================================
-RCS file: /cvs/mesa/Mesa/configs/linux-x86-64-static,v
-retrieving revision 1.6
-diff -r1.6 linux-x86-64-static
-21a22,23
-> APP_LIB_DEPS = -L$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) \
->                $(EXTRA_LIB_PATH) -lX11 -lXmu -lXt -lXi -lpthread -lstdc++ -lm

configs/freebsd-dri

@@ -27,8 +27,9 @@ ASM_SOURCES =
 # Library/program dependencies
 LIBDRM_CFLAGS = `pkg-config --cflags libdrm`
 LIBDRM_LIB = `pkg-config --libs libdrm`
-DRI_LIB_DEPS = -L/usr/local/lib -lm -lpthread -lexpat $(LIBDRM_LIB)
-GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lXxf86vm -lm -lpthread $(LIBDRM_LIB)
+DRI_LIB_DEPS = -L/usr/local/lib -lm -pthread -lexpat $(LIBDRM_LIB)
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lXxf86vm -lXdamage -lXfixes \
+	-lm -pthread $(LIBDRM_LIB)
 
 GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/X11R6/lib -lGLU -lGL -lX11 -lXmu -lXt -lXi -lm
 GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/X11R6/lib -lGL -lXt -lX11

configs/linux-dri

@@ -41,7 +41,8 @@ EXTRA_LIB_PATH=-L/usr/X11R6/lib
 LIBDRM_CFLAGS = `pkg-config --cflags libdrm`
 LIBDRM_LIB = `pkg-config --libs libdrm`
 DRI_LIB_DEPS  = $(EXTRA_LIB_PATH) -lm -lpthread -lexpat -ldl $(LIBDRM_LIB)
-GL_LIB_DEPS   = $(EXTRA_LIB_PATH) -lX11 -lXext -lXxf86vm -lm -lpthread -ldl \
+GL_LIB_DEPS   = $(EXTRA_LIB_PATH) -lX11 -lXext -lXxf86vm -lXdamage -lXfixes \
+		-lm -lpthread -ldl \
                 $(LIBDRM_LIB)
 
 

configs/linux-dri-bp

@@ -1,55 +0,0 @@
-# -*-makefile-*-
-# Configuration for linux-dri: Linux DRI hardware drivers for XFree86 & others
-
-include $(TOP)/configs/default
-
-CONFIG_NAME = linux-dri
-
-# Compiler and flags
-CC = gcc
-CXX = g++
-
-MKDEP = /usr/X11R6/bin/makedepend
-#MKDEP = gcc -M
-#MKDEP_OPTIONS = -MF depend
-
-WARN_FLAGS = -Wall
-OPT_FLAGS  = -g
-PIC_FLAGS  = -fPIC
-
-# Add '-DGLX_USE_TLS' to ARCH_FLAGS to enable TLS support.
-ARCH_FLAGS ?=
-
-DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
-	-D_BSD_SOURCE -D_GNU_SOURCE \
-	-DDRI_NEW_INTERFACE_ONLY -DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 
-
-X11_INCLUDES = -I/usr/X11R6/include -I/usr/X11R6/include/X11/extensions
-
-CFLAGS   = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \
-	$(ASM_FLAGS) -std=c99 -ffast-math 
-
-CXXFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
-
-
-ASM_SOURCES = 
-
-# Library/program dependencies
-EXTRA_LIB_PATH=-L/usr/X11R6/lib
-
-DRI_LIB_DEPS  = $(EXTRA_LIB_PATH) -lm -lpthread -lexpat -ldl
-GL_LIB_DEPS   = $(EXTRA_LIB_PATH) -lX11 -lXext -lXxf86vm -lm -lpthread -ldl
-GLUT_LIB_DEPS = $(EXTRA_LIB_PATH) -L$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB)  -lX11 -lXmu -lXt -lXi -lm
-GLW_LIB_DEPS  = $(EXTRA_LIB_PATH) -L$(LIB_DIR) -l$(GL_LIB) -lXt -lX11
-
-
-# Directories
-SRC_DIRS = glx/x11 mesa glu glut/glx glw
-DRIVER_DIRS = dri
-PROGRAM_DIRS = 
-WINDOW_SYSTEM=dri
-
-# ffb and gamma are missing because they have not been converted to use the new
-# interface.
-DRI_DIRS = dri_client i810 i830 i915 mach64 mga r128 r200 radeon s3v \
-	savage sis tdfx trident unichrome fb

configs/linux-dri-debug

@@ -0,0 +1,16 @@
+# -*-makefile-*-
+# Configuration for linux-dri-debug: Linux DRI hardware drivers for XFree86 & others
+
+include $(TOP)/configs/linux-dri
+
+CONFIG_NAME = linux-dri-debug
+OPT_FLAGS  = -O0 -g
+ARCH_FLAGS = -DDEBUG
+
+# Helpful to reduce the amount of stuff that gets built sometimes:
+#DRI_DIRS = i915tex i915 
+#DRI_DIRS = i965
+#DRI_DIRS = radeon r200 r300
+#DRI_DIRS = unichrome sis trident
+#DRI_DIRS = i810 mga r128 tdfx
+

configs/linux-dri-xcb

@@ -22,7 +22,8 @@ ARCH_FLAGS ?=
 DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
 	-D_BSD_SOURCE -D_GNU_SOURCE \
 	-DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 -DIN_DRI_DRIVER \
-	-DGLX_DIRECT_RENDERING -DHAVE_ALIAS -DUSE_XCB -DHAVE_POSIX_MEMALIGN
+	-DGLX_DIRECT_RENDERING -DGLX_INDIRECT_RENDERING \
+        -DHAVE_ALIAS -DUSE_XCB -DHAVE_POSIX_MEMALIGN
 
 X11_INCLUDES = `pkg-config --cflags-only-I x11` `pkg-config --cflags-only-I xcb` `pkg-config --cflags-only-I x11-xcb` `pkg-config --cflags-only-I xcb-glx`
 
@@ -65,4 +66,4 @@ WINDOW_SYSTEM=dri
 # gamma are missing because they have not been converted to use the new
 # interface.
 DRI_DIRS = i810 i915 mach64 mga r128 r200 r300 radeon s3v \
-	savage sis tdfx trident unichrome ffb
+	savage sis tdfx trident unichrome ffb nouveau

configs/linux-osmesa-static

@@ -1,14 +0,0 @@
-# Configuration for building only libOSMesa on Linux, no Xlib driver
-# This doesn't really have any Linux dependencies, so it should be usable
-# on other (gcc-based) systems.
-
-include $(TOP)/configs/linux-osmesa
-
-CONFIG_NAME = linux-osmesa-static
-
-# Compiler and flags
-MKLIB_OPTIONS = -static
-
-# Library names
-OSMESA_LIB_NAME = libOSMesa.a
-

configs/linux-osmesa32-static

@@ -1,28 +0,0 @@
-# Configuration for 32 bits/channel OSMesa library on Linux
-
-include $(TOP)/configs/default
-
-CONFIG_NAME = linux-osmesa32-static
-
-# Compiler and flags
-CC = gcc
-CXX = g++
-CFLAGS = -O3 -ansi -pedantic -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS -I/usr/X11R6/include -DCHAN_BITS=32 -DDEFAULT_SOFTWARE_DEPTH_BITS=31
-CXXFLAGS = -O3 -ansi -pedantic -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
-MKLIB_OPTIONS = -static
-
-
-# Library names
-OSMESA_LIB = OSMesa32
-OSMESA_LIB_NAME = libOSMesa32.a
-
-
-# Directories
-SRC_DIRS = mesa glu
-DRIVER_DIRS = osmesa
-PROGRAM_DIRS = 
-
-
-# Dependencies
-OSMESA_LIB_DEPS = -lm -lpthread
-APP_LIB_DEPS = -lOSMesa32

configs/linux-solo

@@ -15,6 +15,13 @@ PIC_FLAGS  = -fPIC
 # Add '-DGLX_USE_TLS' to ARCH_FLAGS to enable TLS support.
 ARCH_FLAGS ?=
 
+# DRM and pciaccess
+LIBDRM_CFLAGS = `pkg-config --cflags libdrm`
+LIBDRM_LIB = `pkg-config --libs libdrm`
+PCIACCESS_CFLAGS = `pkg-config --cflags pciaccess`
+PCIACCESS_LIB = `pkg-config --libs pciaccess`
+
+
 DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
 	-D_BSD_SOURCE -D_GNU_SOURCE -DHAVE_POSIX_MEMALIGN \
 	-DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 -DDRM_USE_MALLOC -DIN_DRI_DRIVER
@@ -28,7 +35,7 @@ CXXFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
 ASM_SOURCES = 
 
 # Library/program dependencies
-DRI_LIB_DEPS = -lm -lpthread -lexpat -ldl -L$(TOP)/$(LIB_DIR) 
+DRI_LIB_DEPS = -lm -lpthread -lexpat -ldl -L$(TOP)/$(LIB_DIR) $(PCIACCESS_LIB)
 GL_LIB_DEPS = -lm -lpthread -ldl
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lm
 GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -lm
@@ -39,5 +46,5 @@ SRC_DIRS = glx/mini mesa glu glut/mini
 DRIVER_DIRS = dri
 PROGRAM_DIRS = miniglx
 
-#DRI_DIRS = ffb gamma sis savage
-DRI_DIRS = i810 i915 mach64 mga r128 r200 radeon tdfx unichrome fb
+#DRI_DIRS = ffb gamma sis savage tdfx unichrome fb
+DRI_DIRS = i810 i915tex i915 mach64 mga r128 r200 radeon

configs/linux-tcc

@@ -1,22 +0,0 @@
-# Configuration for debugging on Linux
-
-include $(TOP)/configs/default
-
-CONFIG_NAME = linux-tcc
-
-# Compiler and flags
-CC = gcc
-CXX = g++
-
-TCC_DIR=/home/progs/tcc-0.9.20
-
-CFLAGS = -g -ansi -pedantic -Wall -Wmissing-prototypes -Wundef -fPIC -ffast-math -D_POSIX_SOURCE -D_SVID_SOURCE -D_BSD_SOURCE -I/usr/X11R6/include -DUSE_XSHM -DPTHREADS -DDEBUG -DMESA_DEBUG -DUSE_TCC -I$(TCC_DIR)
-
-CXXFLAGS = -g -ansi -pedantic -Wall -Wundef -fPIC -ffast-math -D_POSIX_SOURCE -D_SVID_SOURCE -D_BSD_SOURCE -DDEBUG -DMESA_DEBUG
-
-GLUT_CFLAGS = -fexceptions
-
-GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread -L$(TCC_DIR) -ltcc -ldl
-GLUT_LIB_DEPS = -L$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
-GLW_LIB_DEPS = -L$(LIB_DIR) -l$(GL_LIB) -lXt -L/usr/X11R6/lib -lX11
-APP_LIB_DEPS = -L$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm

debian/compat

@@ -1 +0,0 @@
-5

debian/control

@@ -1,327 +0,0 @@
-Source: mesa
-Section: graphics
-Priority: optional
-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
-Uploaders: Thierry Reding <thierry@gilfi.de>, Julien Cristau <jcristau@debian.org>
-Standards-Version: 3.7.2
-Build-Depends: debhelper (>= 5), quilt (>= 0.40), pkg-config, libdrm-dev (>= 2.2.0) [!hurd-i386], libx11-dev, xutils-dev, x11proto-gl-dev (>= 1.4.8), libxxf86vm-dev, libexpat1-dev, lesstif2-dev, dpkg-dev (>= 1.13.19)
-
-Package: libgl1-mesa-swx11
-Section: libs
-Architecture: any
-Depends: ${shlibs:Depends}, libosmesa6 (>= 6.5.2-1)
-Conflicts: mesag3-glide, mesag3-glide2, mesag3+ggi, libgl1, nvidia-glx, mesag3, libgl1-mesa-swrast
-Provides: libgl1, mesag3, libgl1-mesa-swrast
-Replaces: libgl1, mesag3, libgl1-mesa-swrast
-Description: A free implementation of the OpenGL API -- runtime
- Mesa is a 3-D graphics library with an API which is very similar to
- that of OpenGL.  To the extent that Mesa utilizes the OpenGL command
- syntax or state machine, it is being used with authorization from
- Silicon Graphics, Inc.  However, the author makes no claim that Mesa
- is in any way a compatible replacement for OpenGL or associated with
- Silicon Graphics, Inc.
- .
- This library provides a pure software rasteriser; it does not provide
- a direct rendering-capable library, or one which uses GLX.  For that,
- please see libgl1-mesa-glx.
- .
- On Linux, this library is also known as libGL or libGL.so.1.
-
-Package: libgl1-mesa-swx11-dbg
-Section: libs
-Priority: extra
-Architecture: any
-Depends: libgl1-mesa-swx11 (= ${binary:Version})
-Conflicts: libgl1-mesa-swrast-dbg
-Provides: libgl1-mesa-swrast-dbg
-Replaces: libgl1-mesa-swrast-dbg
-Description: A free implementation of the OpenGL API -- debugging symbols
- Mesa is a 3-D graphics library with an API which is very similar to
- that of OpenGL.  To the extent that Mesa utilizes the OpenGL command
- syntax or state machine, it is being used with authorization from
- Silicon Graphics, Inc.  However, the author makes no claim that Mesa
- is in any way a compatible replacement for OpenGL or associated with
- Silicon Graphics, Inc.
- .
- This library provides a pure software rasteriser; it does not provide
- a direct rendering-capable library, or one which uses GLX.  For that,
- please see libgl1-mesa-glx.
- .
- On Linux, this library is also known as libGL or libGL.so.1.
- .
- This package contains debugging symbols for the software rasterization GL
- library.
-
-Package: libgl1-mesa-swx11-i686
-Section: libs
-Priority: extra
-Architecture: i386
-Pre-Depends: libgl1-mesa-swx11
-Description: A free implementation of the OpenGL API -- runtime [i686 optimized]
- Mesa is a 3-D graphics library with an API which is very similar to
- that of OpenGL.  To the extent that Mesa utilizes the OpenGL command
- syntax or state machine, it is being used with authorization from
- Silicon Graphics, Inc.  However, the author makes no claim that Mesa
- is in any way a compatible replacement for OpenGL or associated with
- Silicon Graphics, Inc.
- .
- This library provides a pure software rasteriser; it does not provide
- a direct rendering-capable library, or one which uses GLX.  For that,
- please see libgl1-mesa-glx.
- .
- On Linux, this library is also known as libGL or libGL.so.1.
- .
- This set of libraries is optimized for i686 machines and will only be used if
- you are running a 2.6 kernel on an i686 class CPU. This includes Pentium Pro,
- Pentium II/II/IV, Celeron CPU's and similar class CPU's (including clones
- such as AMD Athlon/Opteron, VIA C3 Nehemiah, but not VIA C3 Ezla).
-
-Package: libgl1-mesa-swx11-dev
-Section: libdevel
-Architecture: any
-Depends: libgl1-mesa-swx11 (= ${binary:Version}), libc6-dev, libx11-dev, libxext6, mesa-common-dev (= ${source:Version})
-Provides: libgl-dev, mesag3-widgets, mesag-widgets-dev, libglw-dev, mesag-dev, libgl1-mesa-swrast-dev
-Conflicts: mesa-dev, libgl-dev, mesag3 (<< 3.1-1), nvidia-glx-dev, mesag-dev, libgl1-mesa-swrast-dev
-Replaces: libgl-dev, mesag-dev, libgl1-mesa-swrast-dev
-Description: A free implementation of the OpenGL API -- development support files
- This package provides the development environment required for
- compiling programs with Mesa.  For a complete description of Mesa,
- please look at the libgl1-mesa-swx11 package.
- .
- This package also provides a simple widgets library, libGLw, which
- allows Motif-based applications to embed an OpenGL drawing context.
- The headers and static libraries for compiling programs that use this
- library are included.
- .
- This library provides a pure software rasteriser; it does not provide
- a direct rendering-capable library, or one which uses GLX.  For that,
- please see libgl1-mesa-dev.
-
-Package: libgl1-mesa-glx
-Section: libs
-Architecture: any
-Depends: ${shlibs:Depends}
-Conflicts: libgl1, libgl1-mesa-dri (<< 6.4.0)
-Replaces: libgl1, libgl1-mesa-dri (<< 6.4.0)
-Provides: libgl1
-Description: A free implementation of the OpenGL API -- GLX runtime
- This version of Mesa provides GLX and DRI capabilities: it is capable of
- both direct and indirect rendering.  For direct rendering, it can use DRI
- modules from the libgl1-mesa-dri package to accelerate drawing.
- .
- This package does not include the modules themselves: these can be found
- in the libgl1-mesa-dri package.
- .
- For a complete description of Mesa, please look at the
- libgl1-mesa-swx11 package.
-
-Package: libgl1-mesa-glx-dbg
-Section: libdevel
-Priority: extra
-Architecture: any
-Depends: libgl1-mesa-glx (= ${binary:Version})
-Description: A free implementation of the OpenGL API -- GLX runtime -- debugging symbols
- This version of Mesa provides GLX and DRI capabilities: it is capable of
- both direct and indirect rendering.  For direct rendering, it can use DRI
- modules from the libgl1-mesa-dri package to accelerate drawing.
- .
- This package does not include the modules themselves: these can be found
- in the libgl1-mesa-dri package.
- .
- For a complete description of Mesa, please look at the
- libgl1-mesa-swx11 package.
- .
- This package contains debugging symbols for the GL library with GLX and DRI
- capabilities.
-
-#Package: libgl1-mesa-glx-i686
-#Section: libs
-#Priority: extra
-#Architecture: i386
-#Pre-Depends: libgl1-mesa-glx
-#Description: A free implementation of the OpenGL API -- GLX runtime [i686 optimized]
-# This version of Mesa provides GLX and DRI capabilities: it is capable of
-# both direct and indirect rendering.  For direct rendering, it can use DRI
-# modules from the libgl1-mesa-dri package to accelerate drawing.
-# .
-# This package does not include the modules themselves: these can be found
-# in the libgl1-mesa-dri package.
-# .
-# For a complete description of Mesa, please look at the
-# libgl1-mesa-swx11 package.
-# .
-# This set of libraries is optimized for i686 machines and will only be used if
-# you are running a 2.6 kernel on an i686 class CPU. This includes Pentium Pro,
-# Pentium II/II/IV, Celeron CPU's and similar class CPU's (including clones
-# such as AMD Athlon/Opteron, VIA C3 Nehemiah, but not VIA C3 Ezla).
-
-Package: libgl1-mesa-dri
-Section: libs
-Priority: optional
-Architecture: alpha amd64 arm armeb armel hppa i386 ia64 kfreebsd-i386 kfreebsd-amd64 m68k mips mipsel powerpc s390 sparc
-Depends: ${shlibs:Depends}, libgl1-mesa-glx (= ${binary:Version})
-Suggests: libglide3
-Conflicts: xlibmesa-dri (<< 1:7.0.0)
-Replaces: xlibmesa-dri (<< 1:7.0.0)
-Description: A free implementation of the OpenGL API -- DRI modules
- This version of Mesa provides GLX and DRI capabilities: it is capable of
- both direct and indirect rendering.  For direct rendering, it can use DRI
- modules from the libgl1-mesa-dri package to accelerate drawing.
- .
- This package does not include the OpenGL library itself, only the DRI
- modules for accelerating direct rendering.
- .
- For a complete description of Mesa, please look at the
- libgl1-mesa-swx11 package.
- .
- The tdfx DRI module needs libglide3 to enable direct rendering.
-
-Package: libgl1-mesa-dri-dbg
-Section: libdevel
-Priority: extra
-Architecture: alpha amd64 arm armeb armel hppa i386 ia64 kfreebsd-i386 kfreebsd-amd64 m68k mips mipsel powerpc s390 sparc
-Depends: libgl1-mesa-dri (= ${binary:Version})
-Description: A free implementation of the OpenGL API -- DRI modules -- debugging symbols
- This version of Mesa provides GLX and DRI capabilities: it is capable of
- both direct and indirect rendering.  For direct rendering, it can use DRI
- modules from the libgl1-mesa-dri package to accelerate drawing.
- .
- This package does not include the OpenGL library itself, only the DRI
- modules for accelerating direct rendering.
- .
- For a complete description of Mesa, please look at the
- libgl1-mesa-swx11 package.
- .
- This package contains debugging symbols for the DRI modules.
-
-#Package: libgl1-mesa-dri-i686
-#Section: libs
-#Priority: extra
-#Architecture: i386
-#Pre-Depends: libgl1-mesa-dri
-#Description: A free implementation of the OpenGL API -- DRI modules [i686 optimized]
-# This version of Mesa provides GLX and DRI capabilities: it is capable of
-# both direct and indirect rendering.  For direct rendering, it can use DRI
-# modules from the libgl1-mesa-dri package to accelerate drawing.
-# .
-# This package does not include the OpenGL library itself, only the DRI
-# modules for accelerating direct rendering.
-# .
-# For a complete description of Mesa, please look at the
-# libgl1-mesa-swx11 package.
-# .
-# This set of libraries is optimized for i686 machines and will only be used if
-# you are running a 2.6 kernel on an i686 class CPU. This includes Pentium Pro,
-# Pentium II/II/IV, Celeron CPU's and similar class CPU's (including clones
-# such as AMD Athlon/Opteron, VIA C3 Nehemiah, but not VIA C3 Ezla).
-
-Package: libgl1-mesa-dev
-Section: libdevel
-Architecture: all
-Depends: libc6-dev, mesa-common-dev (= ${source:Version}), libgl1-mesa-glx (>= ${Source-Version}), libgl1-mesa-dri (>= ${Source-Version})
-Conflicts: libgl-dev, libgl1-mesa-dri-dev
-Replaces: libgl-dev, libgl1-mesa-dri-dev
-Provides: libgl-dev, libgl1-mesa-dri-dev
-Description: A free implementation of the OpenGL API -- GLX development support files
- This version of Mesa provides GLX and DRI capabilities: it is capable of
- both direct and indirect rendering.  For direct rendering, it can use DRI
- modules from the libgl1-mesa-dri package to accelerate drawing.
- .
- This package includes headers and static libraries for compiling
- programs with Mesa.
- .
- For a complete description of Mesa, please look at the libgl1-mesa-swx11
- package.
-
-Package: mesa-common-dev
-Section: devel
-Architecture: all
-Replaces: xlibmesa-gl-dev (<< 1:7), xlibosmesa-dev, libgl1-mesa-swx11-dev (<< 6.5.2), libgl1-mesa-dev (<< 6.5.2)
-Depends: libx11-dev
-Description: Developer documentation for Mesa
- This package includes the specifications for the Mesa-specific OpenGL
- extensions, the complete set of release release notes and the
- development header files common to all Mesa packages.
-
-Package: libosmesa6
-Section: libs
-Architecture: any
-Depends: ${shlibs:Depends}
-Replaces: libgl1-mesa-swx11 (<< 6.5.2)
-Description: Mesa Off-screen rendering extension
- OSmesa is a Mesa extension that allows programs to render to an
- off-screen buffer using the OpenGL API without having to create a
- rendering context on an X Server.  It uses a pure software renderer.
- .
- This package provides both 16-bit and 32-bit versions of the off-screen
- renderer which do not require external libraries to work.
-
-Package: libosmesa6-dev
-Section: devel
-Architecture: any
-Depends: libosmesa6 (= ${binary:Version}), mesa-common-dev (= ${source:Version}) | libgl-dev
-Conflicts: xlibosmesa-dev, libosmesa4-dev, libosmesa-dev
-Replaces: xlibosmesa-dev, libosmesa-dev, libgl1-mesa-swx11-dev (<< 6.5.2), mesa-common-dev (<< 6.5.2)
-Provides: xlibosmesa-dev, libosmesa-dev
-Description: Mesa Off-screen rendering extension -- development support files
- This package provides the required environment for developing programs
- that use the off-screen rendering extension of Mesa.
- .
- For more information on OSmesa see the libosmesa6 package.
-
-Package: libglu1-mesa
-Section: libs
-Architecture: any
-Depends: ${shlibs:Depends}, libgl1-mesa-glx | libgl1
-Provides: libglu1
-Conflicts: mesag3 (<< 5.0.0-1), xlibmesa3, libglu1
-Replaces: libglu1
-Description: The OpenGL utility library (GLU)
- GLU offers simple interfaces for building mipmaps; checking for the
- presence of extensions in the OpenGL (or other libraries which follow
- the same conventions for advertising extensions); drawing
- piecewise-linear curves, NURBS, quadrics and other primitives
- (including, but not limited to, teapots); tesselating surfaces; setting
- up projection matrices and unprojecting screen coordinates to world
- coordinates.
- .
- On Linux, this library is also known as libGLU or libGLU.so.1.
- .
- This package provides the SGI implementation of GLU shipped with the
- Mesa package (ergo the "-mesa" suffix).
-
-Package: libglu1-mesa-dev
-Section: libdevel
-Architecture: any
-Depends: libglu1-mesa (= ${binary:Version}), libgl1-mesa-dev | libgl-dev
-Provides: libglu-dev, xlibmesa-glu-dev
-Conflicts: mesag-dev (<< 5.0.0-1), mesa-glide2-dev (<< 5.0.0-1), mesag3+ggi-dev (<< 5.0.0-1), xlibmesa-dev
-Replaces: libglu-dev
-Description: The OpenGL utility library -- development support files
- Includes headers and static libraries for compiling programs with GLU.
- .
- For a complete description of GLU, please look at the libglu1-mesa
- package.
-
-Package: mesa-swx11-source
-Section: libdevel
-Architecture: all
-Description: Mesa software rasteriser source -- development support files
- This package contains the source to the Mesa software rasteriser, which
- implements all of Mesa's GL support in software.  It powers the X11 and
- X server backends (assuming unaccelerated indirect).  This package is
- provided mainly for modular X servers which support GL, and need the
- software rasteriser source to build the GLcore module for unaccelerated
- indirect rendering.
-
-Package: mesa-utils
-Section: x11
-Priority: optional
-Architecture: any
-Depends: ${shlibs:Depends}
-Replaces: xbase-clients (<< 6.8.2-38)
-Description: Miscellaneous Mesa GL utilities
- This package provides several basic GL utilities built by Mesa, including
- glxinfo and glxgears.
-
-# vim: tw=0

debian/copyright

@@ -1,444 +0,0 @@
-This package was debianized by James A. Treacy treacy@debian.org on Thu,
-6 Jan 2000 01:11:34 -0500.  It was newly debianized by Marcelo E.
-Magallon <mmagallo@debian.org> on Sat, 25 Dec 2004 14:50:02 -0600. It was
-again debianized by Thierry Reding <thierry@gilfi.de> on Sat, 14 Oct 2006
-02:01:12 +0200.
-
-It was downloaded from http://www.mesa3d.org/download.html
-
-For more information see:
-
-  http://www.mesa3d.org/
-
-Copyright:
-
-Upstream Author: Brian Paul <brian.paul@tungstengraphics.com>
-
-License:
-
-                    License / Copyright Information
-
-   The Mesa distribution consists of several components. Different
-   copyrights and licenses apply to different components. For
-   example, GLUT is copyrighted by Mark Kilgard, some demo programs
-   are copyrighted by SGI, some of the Mesa device drivers are
-   copyrighted by their authors. See below for a list of Mesa's
-   components and the copyright/license for each.
-
-   The core Mesa library is licensed according to the terms of the
-   XFree86 copyright (an MIT-style license). This allows integration
-   with the XFree86/DRI project. Unless otherwise stated, the Mesa
-   source code and documentation is licensed as follows:
-
- Copyright (C) 1999-2003  Brian Paul   All Rights Reserved.
-
- Permission is hereby granted, free of charge, to any person obtaining a
- copy of this software and associated documentation files (the "Software"),
- to deal in the Software without restriction, including without limitation
- the rights to use, copy, modify, merge, publish, distribute, sublicense,
- and/or sell copies of the Software, and to permit persons to whom the
- Software is furnished to do so, subject to the following conditions:
-
- The above copyright notice and this permission notice shall be included
- in all copies or substantial portions of the Software.
-
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- BRIAN PAUL BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
- AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-                        Attention, Contributors
-
-   When contributing to the Mesa project you must agree to relinquish
-   your work to the holder of the copyright for the particular
-   component you're contributing to. That is, you can't put your own
-   copyright on the code, unless it's a modular piece that can be
-   omitted from Mesa (like a new device driver). If for example, you
-   contribute a bug fix to Mesa's texture mapping code, your code
-   will become a part of the body of work which is copyrighted by
-   Brian Paul and licensed by the above terms.
-
-----------------------------------------------------------------------
-
-Some files, as listed below, are made available under the SGI Free B 
-license.  This license is as follows:
-
-           SGI FREE SOFTWARE LICENSE B (Version 1.1 [02/22/2000])
-
-1.  Definitions.
-
-1.1. "Additional Notice Provisions" means such additional provisions as
-     appear in the Notice in Original Code under the heading "Additional
-     Notice Provisions."
-
-1.2. "Covered Code" means the Original Code or Modifications, or any
-     combination thereof.
-
-1.3. "Hardware" means any physical device that accepts input, processes
-     input, stores the results of processing, and/or provides output.
-
-1.4. "Larger Work" means a work that combines Covered Code or portions
-     thereof with code not governed by the terms of this License.
-
-1.5. "Licensable" means having the right to grant, to the maximum extent
-     possible, whether at the time of the initial grant or subsequently
-     acquired, any and all of the rights conveyed herein.
-
-1.6. "License" means this document.
-
-1.7. "Licensed Patents" means patent claims Licensable by SGI that are
-     infringed by the use or sale of Original Code or any Modifications
-     provided by SGI, or any combination thereof.
-
-1.8. "Modifications" means any addition to or deletion from the
-     substance or structure of the Original Code or any previous
-     Modifications. When Covered Code is released as a series of files,
-     a Modification is: 
-
-     A. Any addition to the contents of a file containing Original Code
-        and/or addition to or deletion from the contents of a file
-        containing previous Modifications.
-
-     B. Any new file that contains any part of the Original Code or
-        previous Modifications.
-
-1.9. "Notice" means any notice in Original Code or Covered Code, as
-     required by and in compliance with this License.
-
-1.10. "Original Code" means source code of computer software code that
-      is described in the source code Notice required by Exhibit A as
-      Original Code, and updates and error corrections specifically 
-      thereto.
-
-1.11. "Recipient" means an individual or a legal entity exercising
-      rights under, and complying with all of the terms of, this License
-      or a future version of this License issued under Section 8. For
-      legal entities, "Recipient" includes any entity that controls, is
-      controlled by, or is under common control with Recipient. For
-      purposes of this definition, "control" of an entity means (a) the
-      power, direct or indirect, to direct or manage such entity, or (b)
-      ownership of fifty percent (50%) or more of the outstanding shares
-      or beneficial ownership of such entity.
-
-1.12. "Recipient Patents" means patent claims Licensable by a Recipient
-      that are infringed by the use or sale of Original Code or any
-      Modifications provided by SGI, or any combination thereof.
-
-1.13. "SGI" means Silicon Graphics, Inc.
-
-1.14. "SGI Patents" means patent claims Licensable by SGI other than the
-      Licensed Patents.
-
-2.  License Grant and Restrictions.
-
-2.1. SGI License Grant. Subject to the terms of this License and any
-     third party intellectual property claims, for the duration of
-     intellectual property protections inherent in the Original Code,
-     SGI hereby grants Recipient a worldwide, royalty-free,
-     non-exclusive license, to do the following: (i) under copyrights
-     Licensable by SGI, to reproduce, distribute, create derivative
-     works from, and, to the extent applicable, display and perform the
-     Original Code and/or any Modifications provided by SGI alone and/or
-     as part of a Larger Work; and (ii) under any Licensable Patents, to
-     make, have made, use, sell, offer for sale, import and/or otherwise
-     transfer the Original Code and/or any Modifications provided by
-     SGI. Recipient accepts the terms and conditions of this License by
-     undertaking any of the aforementioned actions. The patent license
-     shall apply to the Covered Code if, at the time any related
-     Modification is added, such addition of the Modification causes
-     such combination to be covered by the Licensed Patents. The patent
-     license in Section 2.1(ii) shall not apply to any other
-     combinations that include the Modification. No patent license is
-     provided under SGI Patents for infringements of SGI Patents by
-     Modifications not provided by SGI or combinations of Original Code
-     and Modifications not provided by SGI.
-
-2.2. Recipient License Grant. Subject to the terms of this License and
-     any third party intellectual property claims, Recipient hereby
-     grants SGI and any other Recipients a worldwide, royalty-free,
-     non-exclusive license, under any Recipient Patents, to make, have
-     made, use, sell, offer for sale, import and/or otherwise transfer
-     the Original Code and/or any Modifications provided by SGI.
-
-2.3. No License For Hardware Implementations. The licenses granted in
-     Section 2.1 and 2.2 are not applicable to implementation in
-     Hardware of the algorithms embodied in the Original Code or any
-     Modifications provided by SGI .
-
-3.  Redistributions. 
-
-3.1. Retention of Notice/Copy of License. The Notice set forth in
-     Exhibit A, below, must be conspicuously retained or included in any
-     and all redistributions of Covered Code. For distributions of the
-     Covered Code in source code form, the Notice must appear in every
-     file that can include a text comments field; in executable form,
-     the Notice and a copy of this License must appear in related
-     documentation or collateral where the Recipient’s rights relating
-     to Covered Code are described. Any Additional Notice Provisions
-     which actually appears in the Original Code must also be retained
-     or included in any and all redistributions of Covered Code.
-
-3.2. Alternative License. Provided that Recipient is in compliance with
-     the terms of this License, Recipient may, so long as without
-     derogation of any of SGI’s rights in and to the Original Code,
-     distribute the source code and/or executable version(s) of Covered
-     Code under (1) this License; (2) a license identical to this
-     License but for only such changes as are necessary in order to
-     clarify Recipient’s role as licensor of Modifications; and/or (3) a
-     license of Recipient’s choosing, containing terms different from
-     this License, provided that the license terms include this Section
-     3 and Sections 4, 6, 7, 10, 12, and 13, which terms may not be
-     modified or superseded by any other terms of such license. If
-     Recipient elects to use any license other than this License,
-     Recipient must make it absolutely clear that any of its terms which
-     differ from this License are offered by Recipient alone, and not by
-     SGI. It is emphasized that this License is a limited license, and,
-     regardless of the license form employed by Recipient in accordance
-     with this Section 3.2, Recipient may relicense only such rights, in
-     Original Code and Modifications by SGI, as it has actually been
-     granted by SGI in this License.
-
-3.3. Indemnity. Recipient hereby agrees to indemnify SGI for any
-     liability incurred by SGI as a result of any such alternative
-     license terms Recipient offers.
-
-4.  Termination. This License and the rights granted hereunder will
-    terminate automatically if Recipient breaches any term herein and
-    fails to cure such breach within 30 days thereof. Any sublicense to 
-    the Covered Code that is properly granted shall survive any
-    termination of this License, absent termination by the terms of such
-    sublicense. Provisions that, by their nature, must remain in effect
-    beyond the termination of this License, shall survive.
-
-5.  No Trademark Or Other Rights. This License does not grant any rights
-    to: (i) any software apart from the Covered Code, nor shall any
-    other rights or licenses not expressly granted hereunder arise by
-    implication, estoppel or otherwise with respect to the Covered Code;
-    (ii) any trade name, trademark or service mark whatsoever, including
-    without limitation any related right for purposes of endorsement or
-    promotion of products derived from the Covered Code, without prior
-    written permission of SGI; or (iii) any title to or ownership of the
-    Original Code, which shall at all times remains with SGI. All rights
-    in the Original Code not expressly granted under this License are
-    reserved.
-
-6.  Compliance with Laws; Non-Infringement. There are various worldwide
-    laws, regulations, and executive orders applicable to dispositions
-    of Covered Code, including without limitation export, re-export, and
-    import control laws, regulations, and executive orders, of the U.S.
-    government and other countries, and Recipient is reminded it is
-    obliged to obey such laws, regulations, and executive orders.
-    Recipient may not distribute Covered Code that (i) in any way
-    infringes (directly or contributorily) any intellectual property
-    rights of any kind of any other person or entity or (ii) breaches
-    any representation or warranty, express, implied or statutory, to
-    which, under any applicable law, it might be deemed to have been
-    subject.
-
-7.  Claims of Infringement. If Recipient learns of any third party claim
-    that any disposition of Covered Code and/or functionality wholly or
-    partially infringes the third party's intellectual property rights,
-    Recipient will promptly notify SGI of such claim.
-
-8.  Versions of the License. SGI may publish revised and/or new versions
-    of the License from time to time, each with a distinguishing version
-    number. Once Covered Code has been published under a particular
-    version of the License, Recipient may, for the duration of the
-    license, continue to use it under the terms of that version, or
-    choose to use such Covered Code under the terms of any subsequent
-    version published by SGI. Subject to the provisions of Sections 3
-    and 4 of this License, only SGI may modify the terms applicable to
-    Covered Code created under this License.
-
-9.  DISCLAIMER OF WARRANTY. COVERED CODE IS PROVIDED "AS IS." ALL
-    EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS ARE DISCLAIMED,
-    INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES AND CONDITIONS
-    OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR
-    PURPOSE, AND NON-INFRINGEMENT. SGI ASSUMES NO RISK AS TO THE QUALITY
-    AND PERFORMANCE OF THE SOFTWARE. SHOULD THE SOFTWARE PROVE DEFECTIVE
-    IN ANY RESPECT, SGI ASSUMES NO COST OR LIABILITY FOR SERVICING,
-    REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY IS AN ESSENTIAL
-    PART OF THIS LICENSE. NO USE OF ANY COVERED CODE IS AUTHORIZED
-    HEREUNDER EXCEPT SUBJECT TO THIS DISCLAIMER.
-
-10.  LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES NOR LEGAL THEORY,
-     WHETHER TORT (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE OR STRICT
-     LIABILITY), CONTRACT, OR OTHERWISE, SHALL SGI OR ANY SGI LICENSOR
-     BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR
-     CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT
-     LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, LOSS OF
-     DATA, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER
-     COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN
-     INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF
-     LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY
-     RESULTING FROM SGI's NEGLIGENCE TO THE EXTENT APPLICABLE LAW
-     PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE
-     EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
-     THAT EXCLUSION AND LIMITATION MAY NOT APPLY TO RECIPIENT.
-
-11.  Indemnity. Recipient shall be solely responsible for damages
-     arising, directly or indirectly, out of its utilization of rights
-     under this License. Recipient will defend, indemnify and hold
-     harmless Silicon Graphics, Inc. from and against any loss,
-     liability, damages, costs or expenses (including the payment of
-     reasonable attorneys fees) arising out of Recipient's use,
-     modification, reproduction and distribution of the Covered Code or
-     out of any representation or warranty made by Recipient.
-
-12.  U.S. Government End Users. The Covered Code is a "commercial item"
-     consisting of "commercial computer software" as such terms are
-     defined in title 48 of the Code of Federal Regulations and all U.S.
-     Government End Users acquire only the rights set forth in this
-     License and are subject to the terms of this License.
-
-13.  Miscellaneous. This License represents the complete agreement
-     concerning the its subject matter. If any provision of this License
-     is held to be unenforceable, such provision shall be reformed so as
-     to achieve as nearly as possible the same legal and economic effect
-     as the original provision and the remainder of this License will
-     remain in effect. This License shall be governed by and construed
-     in accordance with the laws of the United States and the State of
-     California as applied to agreements entered into and to be
-     performed entirely within California between California residents.
-     Any litigation relating to this License shall be subject to the
-     exclusive jurisdiction of the Federal Courts of the Northern
-     District of California (or, absent subject matter jurisdiction in
-     such courts, the courts of the State of California), with venue
-     lying exclusively in Santa Clara County, California, with the
-     losing party responsible for costs, including without limitation,
-     court costs and reasonable attorneys fees and expenses. The
-     application of the United Nations Convention on Contracts for the
-     International Sale of Goods is expressly excluded. Any law or
-     regulation that provides that the language of a contract shall be
-     construed against the drafter shall not apply to this License.
-
-Exhibit A
-
-License Applicability. Except to the extent portions of this file are
-made subject to an alternative license as permitted in the SGI Free
-Software License B, Version 1.1 (the "License"), the contents of this
-file are subject only to the provisions of the License. You may not use
-this file except in compliance with the License. You may obtain a copy
-of the License at Silicon Graphics, Inc., attn: Legal Services, 1600
-Amphitheatre Parkway, Mountain View, CA 94043-1351, or at:
-
-http://oss.sgi.com/projects/FreeB
-
-Note that, as provided in the License, the Software is distributed on an
-"AS IS" basis, with ALL EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS
-DISCLAIMED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES AND
-CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A
-PARTICULAR PURPOSE, AND NON-INFRINGEMENT.
-
-Original Code. The Original Code is: [name of software, version number,
-and release date], developed by Silicon Graphics, Inc. The Original Code
-is Copyright (c) [dates of first publication, as appearing in the Notice
-in the Original Code] Silicon Graphics, Inc. Copyright in any portions
-created by third parties is as indicated elsewhere herein. All Rights
-Reserved.
-
-Additional Notice Provisions: [such additional provisions, if any, as 
-appear in the Notice in the Original Code under the heading "Additional 
-Notice Provisions"]
-
---------------------------------------------------------------------------
-
-Some other files listed below are made available from Silicon Graphics,
-Inc. under a more liberal, MIT-style license, as follows:
-
-   Permission to use, copy, modify, and distribute this software for
-   any purpose and without fee is hereby granted, provided that the above
-   copyright notice appear in all copies and that both the copyright notice
-   and this permission notice appear in supporting documentation, and that
-   the name of Silicon Graphics, Inc. not be used in advertising
-   or publicity pertaining to distribution of the software without specific,
-   written prior permission.
-
-   THE MATERIAL EMBODIED ON THIS SOFTWARE IS PROVIDED TO YOU "AS-IS"
-   AND WITHOUT WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR OTHERWISE
-   INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR
-   FITNESS FOR A PARTICULAR PURPOSE.  IN NO EVENT SHALL SILICON
-   GRAPHICS, INC.  BE LIABLE TO YOU OR ANYONE ELSE FOR ANY DIRECT,
-   SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY
-   KIND, OR ANY DAMAGES WHATSOEVER, INCLUDING WITHOUT LIMITATION,
-   LOSS OF PROFIT, LOSS OF USE, SAVINGS OR REVENUE, OR THE CLAIMS OF
-   THIRD PARTIES, WHETHER OR NOT SILICON GRAPHICS, INC.  HAS BEEN
-   ADVISED OF THE POSSIBILITY OF SUCH LOSS, HOWEVER CAUSED AND ON
-   ANY THEORY OF LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE
-   POSSESSION, USE OR PERFORMANCE OF THIS SOFTWARE.
-   
-   US Government Users Restricted Rights
-   Use, duplication, or disclosure by the Government is subject to
-   restrictions set forth in FAR 52.227.19(c)(2) or subparagraph
-   (c)(1)(ii) of the Rights in Technical Data and Computer Software
-   clause at DFARS 252.227-7013 and/or in similar or successor
-   clauses in the FAR or the DOD or NASA FAR Supplement.
-   Unpublished-- rights reserved under the copyright laws of the
-   United States.  Contractor/manufacturer is Silicon Graphics,
-   Inc., 2011 N.  Shoreline Blvd., Mountain View, CA 94039-7311.
-
---------------------------------------------------------------------------
-
- Mesa Component Licenses:
-
- Component       Files                 Primary Author      License
- ----------------------------------------------------------------------------
- core Mesa code  src/*.[ch]            Brian Paul          Mesa
-                 include/GL/gl.h
-
- GLX driver      src/X/*               Brian Paul          Mesa
-                 include/GL/glx.h
-                 include/GL/xmesa.h
-
- OS/Mesa driver  src/OSmesa/*          Brian Paul          Mesa
-                 include/GL/osmesa.h
-
- 3Dfx driver     src/FX/*              David Bucciarelli   Mesa
-                 include/GL/fxmesa.h
-
- BeOS R4 driver  mesa/drivers/beos/    Brian Paul          Mesa
-
- MGL driver      include/GL/mglmesa.h  SciTech, Inc        GNU LGPL
-
- Windows driver  mesa/drivers/windows/ Li Wei              GNU LGPL
-                 include/GL/wmesa.h
-
- SVGA driver     mesa/drivers/svga/    Brian Paul          GNU LGPL
-                 include/GL/svgamesa.h
-
- DOS driver      mesa/drivers/dos/     Charlie Wallace     GNU LGPL
-                 include/GL/dosmesa.h
-
- GGI driver      mesa/drivers/ggi/     Uwe Maurer          GNU LGPL
-                 include/GL/ggimesa.h
-
- GLUT            src/glut/*            Mark Kilgard        Mark's copyright
-                 include/GL/*glut*.h
-
- GLU library     src/glu/*             Brian Paul          GNU LGPL
-
- SGI GLU library src/glu/sgi/*         SGI                 SGI Free B
-                 include/GL/glu.h
-
- Ext registry    include/GL/glext.h    SGI                 SGI Free B
-                 include/GL/glxext.h
-
- demo programs   progs/demos/*         various             see source files
-
- X demos         progs/xdemos/*        Brian Paul          see source files
-
- SGI demos       progs/samples/*       SGI                 SGI MIT-style
-
- RedBook demos   progs/redbook/*       SGI                 SGI MIT-style
-
-
-On Debian systems the full text of the GNU LGPL license is found in
-/usr/share/common-licenses/LGPL.
-
-------------------------------------------------------------------------------
-
-The Debian packaging is (C) 2006, Thierry Reding <thierry@gilfi.de> and
-is licensed under the GPL, see `/usr/share/common-licenses/GPL'.
-

debian/glxdemo.1

@@ -1,15 +0,0 @@
-.TH glxdemo 1 "2006-11-29"
-.SH NAME
-glxdemo \- a demonstration of the GLX functions
-.SH SYNOPSIS
-.B glxdemo
-.SH DESCRIPTION
-The \fIglxdemo\fP program shows how to use the GLX functions in order to
-create an OpenGL program running on top of an X server. This program is most
-useful when studied in its source code form.
-.SH AUTHOR
-glxdemo was written by Brian Paul <brian.paul@tungstengraphics.com>.
-.PP
-This manual page was written by Thierry Reding <thierry@gilfi.de>, for the
-Debian project (but may be used by others).
-

debian/glxgears.1

@@ -1,29 +0,0 @@
-.TH glxgears 1 "2006-11-29"
-.SH NAME
-glxgears \- ``gears'' demo for GLX
-.SH SYNOPSIS
-.B glxgears
-.RI [ options ]
-.SH DESCRIPTION
-The \fIglxgears\fP program is a port of the ``gears'' demo to GLX. It displays
-a set of rotating gears and prints out the frame rate at regular intervals. It
-has become quite popular as basic benchmarking tool.
-.SH OPTIONS
-.TP 8
-.B \-display \fIdisplay\fP
-Specify which X display to run on.
-.TP 8
-.B \-info
-Display OpenGL renderer information.
-.TP 8
-.B \-stereo
-Use a stereo enabled GLX visual.
-.TP 8
-.B \-fullscreen
-Run in fullscreen mode.
-.SH AUTHOR
-glxgears was written by Brian Paul <brian.paul@tungstengraphics.com>.
-.PP
-This manual page was written by Thierry Reding <thierry@gilfi.de>, for the
-Debian project (but may be used by others).
-

debian/glxheads.1

@@ -1,30 +0,0 @@
-.TH glxheads 1 "2006-11-29"
-.SH NAME
-glxheads \- exercise multiple GLX connections
-.SH SYNOPSIS
-.B glxheads
-[\fIdisplay\fP ...]
-.SH DESCRIPTION
-The \fIglxheads\fP program will try to open GLX connections on multiple X
-displays as specified on the command-line. If a connection can be made it will
-try to create a direct GLX context (and fallback to using indirect contexts if
-that fails) and open a window displaying a spinning green triangle.
-.PP
-If no display names are specified, \fIglxheads\fP will default to opening a
-single local connection on display 0.
-.SH EXAMPLE
-To open a local connection on display 0 and two remote connections to the
-hosts \fImars\fP (display 0) and \fIvenus\fP (display 1), run glxheads with
-the following command-line:
-.PP
-.RS 3n
-.nf
-$ glxheads :0 mars:0 venus:1
-.fi
-.RE
-.SH AUTHOR
-glxheads was written by Brian Paul <brian.paul@tungstengraphics.com>.
-.PP
-This manual page was written by Thierry Reding <thierry@gilfi.de> for the
-Debian project (but may be used by others).
-

debian/glxinfo.1

@@ -1,41 +0,0 @@
-.TH glxinfo 1 "2006-11-29"
-.SH NAME
-glxinfo \- show information about the GLX implementation
-.SH SYNOPSIS
-.B glxinfo
-.RI [ options ]
-.SH DESCRIPTION
-The \fIglxinfo\fP program shows information about the OpenGL and GLX
-implementations running on a given X display.
-.PP
-The information includes details about the server- and client-side GLX
-implementation, the OpenGL and GLU implementations as well as a list
-of available GLX visuals.
-.SH OPTIONS
-.TP 8
-.B \-v
-Print visuals info in verbose form.
-.TP 8
-.B \-t
-Print verbose table.
-.TP 8
-.B \-display \fIdisplay\fP
-Specify the X display to interrogate.
-.TP 8
-.B \-h
-Print usage information.
-.TP 8
-.B \-i
-Force an indirect rendering context.
-.TP 8
-.B \-b
-Find the ``best'' visual and print it's number.
-.TP 8
-.B \-l
-Print interesting OpenGL limits.
-.SH AUTHOR
-glxinfo was written by Brian Paul <brian.paul@tungstengraphics.com>.
-.PP
-This manual page was written by Thierry Reding <thierry@gilfi.de>, for the
-Debian project (but may be used by others).
-

debian/libgl1-mesa-dev.install

@@ -1 +0,0 @@
-usr/lib/libGL.so

debian/libgl1-mesa-dri-i686.install

@@ -1 +0,0 @@
-usr/lib/dri/i686/cmov/*.so

debian/libgl1-mesa-dri.install

@@ -1 +0,0 @@
-usr/lib/dri/*.so

debian/libgl1-mesa-glx-i686.install

@@ -1 +0,0 @@
-usr/lib/glx/i686/cmov/libGL.so.* usr/lib/i686/cmov

debian/libgl1-mesa-glx.install

@@ -1 +0,0 @@
-usr/lib/glx/libGL.so.* usr/lib

debian/libgl1-mesa-glx.shlibs

@@ -1 +0,0 @@
-libGL 1 libgl1-mesa-glx | libgl1

debian/libgl1-mesa-swx11-dev.install

@@ -1,4 +0,0 @@
-usr/include/GL/GLw*A.h
-usr/lib/libGL.a
-usr/lib/libGL.so
-usr/lib/libGLw.a

debian/libgl1-mesa-swx11-i686.install

@@ -1 +0,0 @@
-usr/lib/i686/cmov/libGL.so.*

debian/libgl1-mesa-swx11.install

@@ -1 +0,0 @@
-usr/lib/libGL.so.*

debian/libgl1-mesa-swx11.shlibs

@@ -1 +0,0 @@
-libGL 1 libgl1-mesa-glx | libgl1

debian/libglu1-mesa-dev.install

@@ -1,4 +0,0 @@
-usr/include/GL/glu.h
-usr/include/GL/glu_mangle.h
-usr/lib/libGLU.a
-usr/lib/libGLU.so

debian/libglu1-mesa.install

@@ -1 +0,0 @@
-usr/lib/libGLU.so.*

debian/libglu1-mesa.shlibs

@@ -1 +0,0 @@
-libGLU 1 libglu1-mesa | libglu1

debian/libglw1-mesa.shlibs

@@ -1 +0,0 @@
-libGLw 1 libglw1-mesa | libglw1

debian/libosmesa6-dev.install

@@ -1,7 +0,0 @@
-usr/include/GL/osmesa.h
-usr/lib/libOSMesa.a
-usr/lib/libOSMesa.so
-usr/lib/libOSMesa16.a
-usr/lib/libOSMesa16.so
-usr/lib/libOSMesa32.a
-usr/lib/libOSMesa32.so

debian/libosmesa6.install

@@ -1,3 +0,0 @@
-usr/lib/libOSMesa.so.*
-usr/lib/libOSMesa16.so.*
-usr/lib/libOSMesa32.so.*

debian/libosmesa6.shlibs

@@ -1,3 +0,0 @@
-libOSMesa 6 libosmesa6 (>= 6.5.2-1) | libgl1-mesa-glide3
-libOSMesa16 6 libosmesa6 (>= 6.5.2-1)
-libOSMesa32 6 libosmesa6 (>= 6.5.2-1)

debian/mesa-common-dev.docs

@@ -1,8 +0,0 @@
-docs/bugs.html
-docs/debugging.html
-docs/envvars.html
-docs/faq.html
-docs/osmesa.html
-docs/RELNOTES-*
-docs/relnotes*
-docs/*.spec

debian/mesa-common-dev.install

@@ -1,4 +0,0 @@
-usr/include/GL/gl.h
-usr/include/GL/glext.h
-usr/include/GL/gl_mangle.h
-usr/include/GL/glx*.h

debian/mesa-swx11-source.install

@@ -1 +0,0 @@
-usr/share/mesa-source/*

debian/mesa-utils.install

@@ -1,4 +0,0 @@
-usr/bin/glxdemo
-usr/bin/glxgears
-usr/bin/glxheads
-usr/bin/glxinfo

debian/mesa-utils.manpages

@@ -1,4 +0,0 @@
-debian/glxdemo.1
-debian/glxgears.1
-debian/glxheads.1
-debian/glxinfo.1

debian/patches/00_create-libdir.patch

@@ -1,17 +0,0 @@
-Patch that allows the Mesa makefile to create a LIB_DIR that is more than one
-level below TOP.
-
-This patch by Thierry Reding.
-Not submitted to Mesa.
-
---- a/src/Makefile
-+++ b/src/Makefile
-@@ -29,7 +29,7 @@
- 	done
- 
- $(TOP)/$(LIB_DIR):
--	-mkdir $(TOP)/$(LIB_DIR)
-+	mkdir -p $(TOP)/$(LIB_DIR)
- 
- 
- clean:

debian/patches/01_fix-makefile.patch

@@ -1,16 +0,0 @@
-Do not build OSMesa for a standalone configuration, since Debian only ships
-OSMesa in a separate package.
-
-This patch by Thierry Reding.
-
---- a/src/mesa/Makefile
-+++ b/src/mesa/Makefile
-@@ -107,7 +107,7 @@
- 	$(OSMESA_DRIVER_OBJECTS)
- 
- 
--stand-alone: depend subdirs $(TOP)/$(LIB_DIR)/$(GL_LIB_NAME) $(TOP)/$(LIB_DIR)/$(OSMESA_LIB_NAME)
-+stand-alone: depend subdirs $(TOP)/$(LIB_DIR)/$(GL_LIB_NAME)
- 
- osmesa-only: depend subdirs $(TOP)/$(LIB_DIR)/$(OSMESA_LIB_NAME)
- 

debian/patches/02_use-ieee-fp-on-s390-and-m68k.patch

@@ -1,17 +0,0 @@
-Patch that fixes Debian bug #349437.
-
-This patch by David Nusinow.
-
---- a/src/mesa/main/imports.h
-+++ b/src/mesa/main/imports.h
-@@ -155,8 +155,9 @@
-  *** USE_IEEE: Determine if we're using IEEE floating point
-  ***/
- #if defined(__i386__) || defined(__386__) || defined(__sparc__) || \
--    defined(__s390x__) || defined(__powerpc__) || \
-+    defined(__s390__) || defined(__s390x__) || defined(__powerpc__) || \
-     defined(__amd64__) || \
-+    defined(__m68k__) || \
-     defined(ia64) || defined(__ia64__) || \
-     defined(__hppa__) || defined(hpux) || \
-     defined(__mips) || defined(_MIPS_ARCH) || \

debian/patches/03_optional-progs-and-install.patch

@@ -1,45 +0,0 @@
-Allow the programs that are to be built to be defined in the build
-configuration.
-
-Provide an install target for installing the programs in $(INSTALL_DIR)/bin.
-
-This patch by Thierry Reding.
-Not submitted to Mesa.
-
---- a/progs/xdemos/Makefile
-+++ b/progs/xdemos/Makefile
-@@ -8,7 +8,7 @@
- 
- LIB_DEP = $(TOP)/$(LIB_DIR)/$(GL_LIB_NAME) $(TOP)/$(LIB_DIR)/$(GLU_LIB_NAME)
- 
--PROGS = glthreads \
-+PROGS ?= glthreads \
- 	glxdemo \
- 	glxgears \
- 	glxgears_fbconfig \
-@@ -44,6 +44,9 @@
- 
- default: $(PROGS)
- 
-+install: $(PROGS)
-+	$(INSTALL) -d $(INSTALL_DIR)/bin
-+	$(INSTALL) -m 755 $(PROGS) $(INSTALL_DIR)/bin
- 
- clean:
- 	-rm -f $(PROGS)
---- a/progs/Makefile
-+++ b/progs/Makefile
-@@ -21,8 +21,12 @@
- 		fi \
- 	done
- 
--# Dummy install target
- install:
-+	@for dir in $(SUBDIRS) ; do \
-+		if [ -d $$dir ] ; then \
-+			(cd $$dir ; $(MAKE) install) ; \
-+		fi \
-+	done
- 
- clean:
- 	@for dir in $(SUBDIRS) tests ; do \

debian/patches/04_cleanup-osmesa-configs.patch

@@ -1,189 +0,0 @@
-diff --git a/configs/linux-osmesa b/configs/linux-osmesa
-index cc1fbbd..aabab59 100644
---- a/configs/linux-osmesa
-+++ b/configs/linux-osmesa
-@@ -9,8 +9,17 @@ CONFIG_NAME = linux-osmesa
- # Compiler and flags
- CC = gcc
- CXX = g++
--CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DPTHREADS
--CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
-+
-+PIC_FLAGS  = -fPIC
-+
-+DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
-+	-D_BSD_SOURCE -D_GNU_SOURCE \
-+	-DPTHREADS -DUSE_XSHM -DHAVE_POSIX_MEMALIGN
-+
-+CFLAGS = -ansi -pedantic $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \
-+	$(ASM_FLAGS) -ffast-math
-+
-+CXXFLAGS = -ansi -pedantic $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
- 
- 
- # Directories
-@@ -23,3 +33,4 @@ PROGRAM_DIRS = osdemos
- OSMESA_LIB_DEPS = -lm -lpthread
- GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
- APP_LIB_DEPS = -lOSMesa -lGLU
-+
-diff --git a/configs/linux-osmesa-static b/configs/linux-osmesa-static
-index 465f83c..eb3575f 100644
---- a/configs/linux-osmesa-static
-+++ b/configs/linux-osmesa-static
-@@ -8,7 +8,8 @@ CONFIG_NAME = linux-osmesa-static
- 
- # Compiler and flags
- MKLIB_OPTIONS = -static
-+PIC_FLAGS =
- 
- # Library names
--OSMESA_LIB_NAME = libOSMesa.a
-+OSMESA_LIB_NAME = lib$(OSMESA_LIB).a
- 
-diff --git a/configs/linux-osmesa16 b/configs/linux-osmesa16
-index 1fb0186..2a06254 100644
---- a/configs/linux-osmesa16
-+++ b/configs/linux-osmesa16
-@@ -1,28 +1,17 @@
- # Configuration for 16 bits/channel OSMesa library on Linux
- 
--include $(TOP)/configs/default
-+include $(TOP)/configs/linux-osmesa
- 
- CONFIG_NAME = linux-osmesa16
- 
--# Compiler and flags
--CC = gcc
--CXX = g++
--CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS -I/usr/X11R6/include -DCHAN_BITS=16 -DDEFAULT_SOFTWARE_DEPTH_BITS=31
--CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
--
-+DEFINES += -DCHAN_BITS=16 -DDEFAULT_SOFTWARE_DEPTH_BITS=32
- 
- # Library names
- OSMESA_LIB = OSMesa16
--OSMESA_LIB_NAME = libOSMesa16.so
--
- 
- # Directories
--SRC_DIRS = mesa glu
--DRIVER_DIRS = osmesa
- PROGRAM_DIRS = 
- 
--
- # Dependencies
--OSMESA_LIB_DEPS = -lm -lpthread
--GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
--APP_LIB_DEPS = -lOSMesa16
-+APP_LIB_DEPS = -l$(OSMESA_LIB)
-+
-diff --git a/configs/linux-osmesa16-static b/configs/linux-osmesa16-static
-index 6645504..894cf82 100644
---- a/configs/linux-osmesa16-static
-+++ b/configs/linux-osmesa16-static
-@@ -1,28 +1,13 @@
- # Configuration for 16 bits/channel OSMesa library on Linux
- 
--include $(TOP)/configs/default
-+include $(TOP)/configs/linux-osmesa16
- 
- CONFIG_NAME = linux-osmesa16-static
- 
- # Compiler and flags
--CC = gcc
--CXX = g++
--CFLAGS = -O3 -ansi -pedantic -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS -I/usr/X11R6/include -DCHAN_BITS=16 -DDEFAULT_SOFTWARE_DEPTH_BITS=31
--CXXFLAGS = -O3 -ansi -pedantic -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
- MKLIB_OPTIONS = -static
--
-+PIC_FLAGS =
- 
- # Library names
--OSMESA_LIB = OSMesa16
--OSMESA_LIB_NAME = libOSMesa16.a
--
--
--# Directories
--SRC_DIRS = mesa glu
--DRIVER_DIRS = osmesa
--PROGRAM_DIRS = 
--
-+OSMESA_LIB_NAME = lib$(OSMESA_LIB).a
- 
--# Dependencies
--OSMESA_LIB_DEPS = -lm -lpthread
--APP_LIB_DEPS = -lOSMesa16
-diff --git a/configs/linux-osmesa32 b/configs/linux-osmesa32
-index a1e5a35..5a703f6 100644
---- a/configs/linux-osmesa32
-+++ b/configs/linux-osmesa32
-@@ -1,28 +1,18 @@
- # Configuration for 32 bits/channel OSMesa library on Linux
- 
--include $(TOP)/configs/default
-+include $(TOP)/configs/linux-osmesa
- 
- CONFIG_NAME = linux-osmesa32
- 
- # Compiler and flags
--CC = gcc
--CXX = g++
--CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS -I/usr/X11R6/include -DCHAN_BITS=32 -DDEFAULT_SOFTWARE_DEPTH_BITS=31
--CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
--
-+DEFINES += -DCHAN_BITS=32 -DDEFAULT_SOFTWARE_DEPTH_BITS=31
- 
- # Library names
- OSMESA_LIB = OSMesa32
--OSMESA_LIB_NAME = libOSMesa32.so
--
- 
- # Directories
--SRC_DIRS = mesa glu
--DRIVER_DIRS = osmesa
- PROGRAM_DIRS = 
- 
--
- # Dependencies
--OSMESA_LIB_DEPS = -lm -lpthread
--GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
--APP_LIB_DEPS = -lOSMesa32
-+APP_LIB_DEPS = -l$(OSMESA_LIB)
-+
-diff --git a/configs/linux-osmesa32-static b/configs/linux-osmesa32-static
-index 6db8bc0..ecbb72e 100644
---- a/configs/linux-osmesa32-static
-+++ b/configs/linux-osmesa32-static
-@@ -1,28 +1,13 @@
- # Configuration for 32 bits/channel OSMesa library on Linux
- 
--include $(TOP)/configs/default
-+include $(TOP)/configs/linux-osmesa32
- 
- CONFIG_NAME = linux-osmesa32-static
- 
- # Compiler and flags
--CC = gcc
--CXX = g++
--CFLAGS = -O3 -ansi -pedantic -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS -I/usr/X11R6/include -DCHAN_BITS=32 -DDEFAULT_SOFTWARE_DEPTH_BITS=31
--CXXFLAGS = -O3 -ansi -pedantic -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
- MKLIB_OPTIONS = -static
--
-+PIC_FLAGS =
- 
- # Library names
--OSMESA_LIB = OSMesa32
--OSMESA_LIB_NAME = libOSMesa32.a
--
--
--# Directories
--SRC_DIRS = mesa glu
--DRIVER_DIRS = osmesa
--PROGRAM_DIRS = 
--
-+OSMESA_LIB_NAME = lib$(OSMESA_LIB).a
- 
--# Dependencies
--OSMESA_LIB_DEPS = -lm -lpthread
--APP_LIB_DEPS = -lOSMesa32

debian/patches/05_static-nonpic.patch

@@ -1,60 +0,0 @@
-diff --git a/configs/linux-alpha-static b/configs/linux-alpha-static
-index 2a30af9..eb6a08a 100644
---- a/configs/linux-alpha-static
-+++ b/configs/linux-alpha-static
-@@ -11,6 +11,7 @@ CFLAGS = -O3 -mcpu=ev5 -ansi -mieee -pedantic -D_XOPEN_SOURCE -DUSE_XSHM
- CXXFLAGS = -O3 -mcpu=ev5 -ansi -mieee -pedantic -D_XOPEN_SOURCE
- GLUT_CFLAGS = -fexceptions
- MKLIB_OPTIONS = -static
-+PIC_FLAGS =
- 
- 
- # Library names (actual file names)
-diff --git a/configs/linux-ppc-static b/configs/linux-ppc-static
-index d0e1688..3f3dc55 100644
---- a/configs/linux-ppc-static
-+++ b/configs/linux-ppc-static
-@@ -5,6 +5,7 @@ include $(TOP)/configs/linux-ppc
- CONFIG_NAME = linux-ppc-static
- 
- MKLIB_OPTIONS = -static
-+PIC_FLAGS =
- 
- # Library names (actual file names)
- GL_LIB_NAME = libGL.a
-diff --git a/configs/linux-static b/configs/linux-static
-index 85141ea..1592668 100644
---- a/configs/linux-static
-+++ b/configs/linux-static
-@@ -5,6 +5,7 @@ include $(TOP)/configs/linux
- CONFIG_NAME = linux-static
- 
- MKLIB_OPTIONS = -static
-+PIC_FLAGS =
- 
- # Library names (actual file names)
- GL_LIB_NAME = libGL.a
-diff --git a/configs/linux-x86-64-static b/configs/linux-x86-64-static
-index 0257430..2d0b664 100644
---- a/configs/linux-x86-64-static
-+++ b/configs/linux-x86-64-static
-@@ -5,6 +5,7 @@ include $(TOP)/configs/linux-x86-64
- CONFIG_NAME = linux-x86-64-static
- 
- MKLIB_OPTIONS = -static
-+PIC_FLAGS =
- 
- # Library names (actual file names)
- GL_LIB_NAME = libGL.a
-diff --git a/configs/linux-x86-static b/configs/linux-x86-static
-index 9915987..e6a3696 100644
---- a/configs/linux-x86-static
-+++ b/configs/linux-x86-static
-@@ -5,6 +5,7 @@ include $(TOP)/configs/linux-x86
- CONFIG_NAME = linux-x86-static
- 
- MKLIB_OPTIONS = -static
-+PIC_FLAGS =
- 
- # Library names (actual file names)
- GL_LIB_NAME = libGL.a

debian/patches/06_fix_texture_data_corruption.patch

@@ -1,23 +0,0 @@
-From: Michel Dänzer <michel@tungstengraphics.com>
-Date: Thu, 14 Dec 2006 09:01:43 +0000 (+0100)
-Subject: _mesa_swizzle_ubyte_image: Only use single swizzle_copy call when strides match.
-X-Git-Url: http://gitweb.freedesktop.org/?p=mesa/mesa.git;a=commitdiff;h=9c09259b8bef8f120cc6f4bb1a44f0eae37d71b3
-
-_mesa_swizzle_ubyte_image: Only use single swizzle_copy call when strides match.
-
-This fixes texture data corruption with glTexSubimage (and probably glTexImage
-under some circumstances) with the texstore swizzle path.
----
-
---- a/src/mesa/main/texstore.c
-+++ b/src/mesa/main/texstore.c
-@@ -808,7 +808,8 @@ _mesa_swizzle_ubyte_image(GLcontext *ctx
- 
- /*    _mesa_printf("map %d %d %d %d\n", map[0], map[1], map[2], map[3]);  */
- 
--   if (srcRowStride == srcWidth * srcComponents &&
-+   if (srcRowStride == dstRowStride &&
-+       srcRowStride == srcWidth * srcComponents &&
-        dimensions < 3) {
-       /* 1 and 2D images only */
-       GLubyte *dstImage = (GLubyte *) dstAddr

debian/patches/07_call_radeonSetCliprects_from_radeonMakeCurrent.patch

@@ -1,56 +0,0 @@
-From: Michel Dänzer <michel@tungstengraphics.com>
-Date: Tue, 6 Mar 2007 12:22:35 +0000 (+0100)
-Subject: r300: Call radeonSetCliprects from radeonMakeCurrent.
-X-Git-Url: http://gitweb.freedesktop.org/?p=mesa/mesa.git;a=commitdiff;h=6f9b1afc862851532e4820705c412388b497ad58
-
-r300: Call radeonSetCliprects from radeonMakeCurrent.
-
-Based on a patch by Panagiotis Papadakos.
-
-Among other things, this makes sure the framebuffer object associated with the
-drawable has the correct size when _mesa_make_current is called, so the default
-viewport is set up correctly.
-
-Also update radeon->lastStamp in radeonSetCliprects.
----
-
---- a/src/mesa/drivers/dri/r300/radeon_context.c
-+++ b/src/mesa/drivers/dri/r300/radeon_context.c
-@@ -51,6 +51,7 @@ WITH THE SOFTWARE OR THE USE OR OTHER DE
- #include "radeon_macros.h"
- #include "radeon_reg.h"
- 
-+#include "radeon_state.h"
- #include "r300_state.h"
- 
- #include "utils.h"
-@@ -279,6 +280,8 @@ GLboolean radeonMakeCurrent(__DRIcontext
- 
- 			r300UpdateWindow(radeon->glCtx);
- 			r300UpdateViewportOffset(radeon->glCtx);
-+
-+			radeonSetCliprects(radeon);
- 		}
- 
- 		_mesa_make_current(radeon->glCtx,
---- a/src/mesa/drivers/dri/r300/radeon_lock.c
-+++ b/src/mesa/drivers/dri/r300/radeon_lock.c
-@@ -90,7 +90,6 @@ static void r300RegainedLock(radeonConte
- #else
- 		radeonUpdateScissor(radeon->glCtx);
- #endif
--		radeon->lastStamp = drawable->lastStamp;
- 	}
- 
- 	if (sarea->ctx_owner != radeon->dri.hwContext) {
---- a/src/mesa/drivers/dri/r300/radeon_state.c
-+++ b/src/mesa/drivers/dri/r300/radeon_state.c
-@@ -185,6 +185,8 @@ void radeonSetCliprects(radeonContextPtr
- 
- 	if (radeon->state.scissor.enabled)
- 		radeonRecalcScissorRects(radeon);
-+
-+	radeon->lastStamp = drawable->lastStamp;
- }
- 
- 

debian/patches/08_r300_update_window_state_when_bound_but_stamp_changed.patch

@@ -1,35 +0,0 @@
-From: Michel Dänzer <michel@tungstengraphics.com>
-Date: Fri, 9 Mar 2007 08:43:17 +0000 (+0100)
-Subject: r300: Also update window state when it's already bound but its stamp changed.
-X-Git-Url: http://gitweb.freedesktop.org/?p=mesa/mesa.git;a=commitdiff;h=4d9901a1cab8e0d55b1b2309cf3ffec235e53149
-
-r300: Also update window state when it's already bound but its stamp changed.
-
-And set new cliprects before deriving other state from them. This ensures
-cliprects aren't accessed after having been freed.
-
-Thanks to Panagiotis Papadakos for testing various iterations of this.
----
-
---- a/src/mesa/drivers/dri/r300/radeon_context.c
-+++ b/src/mesa/drivers/dri/r300/radeon_context.c
-@@ -273,15 +273,15 @@ GLboolean radeonMakeCurrent(__DRIcontext
- 					      &radeon->vbl_seq);
- 		}
- 
-+		radeon->dri.readable = driReadPriv;
-+
- 		if (radeon->dri.drawable != driDrawPriv ||
--		    radeon->dri.readable != driReadPriv) {
-+		    radeon->lastStamp != driDrawPriv->lastStamp) {
- 			radeon->dri.drawable = driDrawPriv;
--			radeon->dri.readable = driReadPriv;
- 
-+			radeonSetCliprects(radeon);
- 			r300UpdateWindow(radeon->glCtx);
- 			r300UpdateViewportOffset(radeon->glCtx);
--
--			radeonSetCliprects(radeon);
- 		}
- 
- 		_mesa_make_current(radeon->glCtx,

debian/patches/09_i915_always_enable_pixel_fog.patch

@@ -1,31 +0,0 @@
-From: Zou Nan hai <nanhai.zou@intel.com>
-Date: Fri, 2 Feb 2007 01:35:17 +0000 (+0800)
-Subject:   Fix fd.o #9686, when fall into vertex fog,
-X-Git-Url: http://gitweb.freedesktop.org/?p=mesa/mesa.git;a=commitdiff;h=2dfb3a217f730d6783fb2ac8b73248dc682f923c
-
-  Fix fd.o #9686, when fall into vertex fog,
-  fog factors are precomputed in t_vb_fog.c compute_fog_blend_factors,
-  which is incompatible with appended fragment fog code.
-  That will make GoogleEarth display abnormally.
-  always use pixel fog.
----
-
---- a/src/mesa/drivers/dri/i915/i915_state.c
-+++ b/src/mesa/drivers/dri/i915/i915_state.c
-@@ -611,10 +611,12 @@ void i915_update_fog( GLcontext *ctx )
- 	 i915->state.Ctx[I915_CTXREG_LIS5] &= ~S5_FOG_ENABLE;
-    }
- 
--   if (enabled) {
--      _tnl_allow_vertex_fog( ctx, (i915->vertex_fog == I915_FOG_VERTEX) ); 
--      _tnl_allow_pixel_fog( ctx, (i915->vertex_fog != I915_FOG_VERTEX) ); 
--   }
-+   /* always enbale pixel fog
-+    * vertex fog use precaculted fog coord will conflict with appended
-+    * fog program
-+    */
-+    _tnl_allow_vertex_fog( ctx, 0 );
-+    _tnl_allow_pixel_fog( ctx, 1 );
- }
- 
- static void i915Fogfv(GLcontext *ctx, GLenum pname, const GLfloat *param)

debian/patches/series

@@ -1,10 +0,0 @@
-00_create-libdir.patch
-01_fix-makefile.patch
-02_use-ieee-fp-on-s390-and-m68k.patch
-03_optional-progs-and-install.patch
-04_cleanup-osmesa-configs.patch
-05_static-nonpic.patch
-06_fix_texture_data_corruption.patch
-07_call_radeonSetCliprects_from_radeonMakeCurrent.patch
-08_r300_update_window_state_when_bound_but_stamp_changed.patch
-09_i915_always_enable_pixel_fog.patch

debian/rules

@@ -1,139 +0,0 @@
-#!/usr/bin/make -f
-# debian/rules for the Debian mesa package
-# Copyright © 2006 Thierry Reding <thierry@gilfi.de>
-
-# Uncomment this to turn on verbose mode.
-#export DH_VERBOSE=1
-
-STAMP_DIR = debian/stamp
-
-QUILT_STAMPFN = $(STAMP_DIR)/patch
-include /usr/share/quilt/quilt.make
-
-CFLAGS = -Wall -g
-ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
-	CFLAGS += -O0
-else
-	CFLAGS += -O2
-endif
-ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS)))
-	INSTALL_PROGRAM += -s
-endif
-
-DEB_BUILD_ARCH     ?= $(shell dpkg-architecture -qDEB_BUILD_ARCH)
-DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
-DEB_BUILD_DIR      ?= $(CURDIR)/obj-$(DEB_BUILD_GNU_TYPE)
-
-export DEB_BUILD_ARCH
-
-# choose which configurations to build
-SWX11_GLU_CONFIGS =
-DRI_CONFIGS =
-
-include debian/scripts/choose-configs
-
-# build the following configurations by default
-CONFIGS = $(SWX11_GLU_CONFIGS) \
-          $(DRI_CONFIGS) \
-          debian-osmesa \
-          debian-osmesa-static \
-          debian-osmesa16 \
-          debian-osmesa16-static \
-          debian-osmesa32 \
-          debian-osmesa32-static
-
-STAMP = $(STAMP_DIR)/$(DEB_BUILD_GNU_TYPE)
-BUILD_STAMPS = $(addprefix $(STAMP)-build-, $(CONFIGS))
-INSTALL_STAMPS = $(addprefix $(STAMP)-install-, $(CONFIGS)) \
-                 $(STAMP_DIR)/install-source
-
-# list the configurations that will built
-configs:
-	@echo Building the following configurations: $(CONFIGS)
-
-$(STAMP_DIR):
-	dh_testdir
-	mkdir -p $@
-
-$(QUILT_STAMPFN): $(STAMP_DIR)
-
-
-build: $(BUILD_STAMPS)
-
-$(STAMP)-build-%: patch
-	dh_testdir
-	mkdir -p $(DEB_BUILD_DIR)/$*
-	find $(CURDIR)/* -maxdepth 0 -not -path '$(DEB_BUILD_DIR)*' | \
-		xargs cp -rlf -t $(DEB_BUILD_DIR)/$*
-	ln -sf $* $(DEB_BUILD_DIR)/$*/configs/current
-	cd $(DEB_BUILD_DIR)/$* && $(MAKE)
-	touch $@
-
-pre-install:
-	dh_testdir
-	dh_testroot
-	dh_clean -k --exclude ./Makefile.orig --exclude configs/CVS/Root.bak
-	rm -rf $(INSTALL_STAMPS)
-
-install: pre-install $(INSTALL_STAMPS)
-
-$(STAMP)-install-%: $(STAMP)-build-%
-	# Add here commands to install the package into debian/tmp
-	cd $(DEB_BUILD_DIR)/$* && $(MAKE) install DESTDIR=$(CURDIR)/debian/tmp
-	touch $@
-
-$(STAMP_DIR)/install-source:
-	# install Mesa source for mesa-swx11-source package
-	chmod a+x debian/scripts/install-source.sh
-	debian/scripts/install-source.sh
-	touch $@
-
-clean: unpatch
-	dh_testdir
-	dh_testroot
-	dh_clean --exclude ./Makefile.orig
-	rm -rf $(DEB_BUILD_DIR) $(STAMP_DIR)
-
-# Build architecture-independent files here.
-binary-indep: build install
-	dh_testdir
-	dh_testroot
-	dh_installchangelogs -i
-	dh_installdocs -i
-	dh_installexamples -i
-	dh_install --sourcedir=debian/tmp --list-missing -i
-	dh_installman -i
-	dh_link -i
-	dh_compress -i
-	dh_fixperms -i
-	dh_installdeb -i
-	dh_gencontrol -i
-	dh_md5sums -i
-	dh_builddeb -i
-
-# Build architecture-dependent files here.
-binary-arch: build install
-	dh_testdir
-	dh_testroot
-	dh_installchangelogs -s
-	dh_installdocs -s
-	dh_installexamples -s
-	dh_install --sourcedir=debian/tmp --list-missing -s
-	dh_installman -s
-	dh_link -s
-	dh_strip -plibgl1-mesa-swx11 --dbg-package=libgl1-mesa-swx11-dbg
-	dh_strip -plibgl1-mesa-glx --dbg-package=libgl1-mesa-glx-dbg
-	dh_strip -plibgl1-mesa-dri --dbg-package=libgl1-mesa-dri-dbg
-	dh_strip -s
-	dh_compress -s
-	dh_fixperms -s
-	dh_makeshlibs -s
-	dh_installdeb -s
-	dh_shlibdeps -s
-	dh_gencontrol -s
-	dh_md5sums -s
-	dh_builddeb -s
-
-binary: binary-indep binary-arch
-.PHONY: configs build clean binary-indep binary-arch binary install configure
-

debian/scripts/choose-configs

@@ -1,56 +0,0 @@
-# Script to choose which configurations are to be built depending on the value
-# of the DEB_BUILD_ARCH variable.
-#
-# Copyright © 2006 Thierry Reding <thierry@gilfi.de>
-
-##############################################################################
-## architecture-specific configurations ######################################
-
-# choose an architecture-specific build of swx11 and GLU if a matching
-# configuration exists
-ifneq ($(wildcard configs/debian-swx11+glu-$(DEB_BUILD_ARCH)),)
-	SWX11_GLU_CONFIGS := debian-swx11+glu-$(DEB_BUILD_ARCH)
-else
-	SWX11_GLU_CONFIGS := debian-swx11+glu-any
-endif
-
-# same for static builds
-ifneq ($(wildcard configs/debian-swx11+glu-static-$(DEB_BUILD_ARCH)),)
-	SWX11_GLU_CONFIGS += debian-swx11+glu-static-$(DEB_BUILD_ARCH)
-else
-	SWX11_GLU_CONFIGS += debian-swx11+glu-static-any
-endif
-
-# and for the GLX/DRI-enabled libGL
-ifneq ($(wildcard configs/debian-indirect-$(DEB_BUILD_ARCH)),)
-	DRI_CONFIGS := debian-indirect-$(DEB_BUILD_ARCH)
-else
-  ifneq ($(wildcard configs/debian-dri-$(DEB_BUILD_ARCH)),)
-	DRI_CONFIGS := debian-dri-$(DEB_BUILD_ARCH)
-  else
-	DRI_CONFIGS := debian-dri-any
-  endif
-endif
-
-##############################################################################
-## CPU-optimized configurations ##############################################
-
-ifeq ($(DEB_BUILD_ARCH), i386)
-	SWX11_GLU_CONFIGS += debian-swx11+glu-i386-i686
-#	DRI_CONFIGS += debian-dri-i386-i686
-endif
-
-#ifeq ($(DEB_BUILD_ARCH), alpha)
-#	SWX11_GLU_CONFIGS += debian-swx11+glu-alpha-ev5
-#endif
-
-#ifeq ($(DEB_BUILD_ARCH), powerpc)
-#	SWX11_GLU_CONFIGS += debian-swx11+glu-powerpc-603
-#endif
-
-#ifeq ($(DEB_BUILD_ARCH), sparc)
-#	SWX11_GLU_CONFIGS += debian-swx11+glu-sparc-ultrasparc
-#endif
-
-# vim: ft=make
-

debian/scripts/install-source.sh

@@ -1,46 +0,0 @@
-#!/bin/sh
-
-if [ -n "$1" ]; then
-	TOP="$1"
-else
-	TOP=`pwd`
-fi
-
-SOURCE_DIRS='
-	include/GL/internal
-	src/glx/x11
-	src/mesa/array_cache
-	src/mesa/drivers/common
-	src/mesa/drivers/dri/common
-	src/mesa/drivers/dri/glcore
-	src/mesa/drivers/x11
-	src/mesa/glapi
-	src/mesa/main
-	src/mesa/math
-	src/mesa/ppc
-	src/mesa/shader
-	src/mesa/sparc
-	src/mesa/swrast_setup
-	src/mesa/swrast
-	src/mesa/tnl_dd
-	src/mesa/tnl
-	src/mesa/x86-64
-	src/mesa/x86
-'
-
-FILTER="-not -path '*/.svn*'"
-TARGET=${TOP}/debian/tmp/usr/share/mesa-source
-
-(
-	find $SOURCE_DIRS $FILTER -name '*.[ch]';
-	find include/GL $FILTER -name 'xmesa*.h';
-) | \
-	while read x; do
-		DIRNAME=`dirname "$x"`
-		mkdir -p "$TARGET/$DIRNAME"
-		cp -lf "$x" "$TARGET/$DIRNAME"
-	done
-
-# fix permissions
-find "$TARGET" -type f | xargs chmod 0644
-

debian/watch

@@ -1,2 +0,0 @@
-version=3
-http://sf.net/mesa3d/MesaLib-(.*)\.tar\.gz

docs/MiniGLX.html

@@ -88,19 +88,6 @@ driver (such as <code>radeon_dri.so</code>) at runtime. &nbsp;The
 environment variable <code>LIBGL_DRIVERS_PATH</code> should name the
 directory where these modules are located.<br>
 <br>
-Prior to running a MiniGXL application, the following kernel modules
-must be installed:<br>
-<br>
-<div style="margin-left: 40px;"> agpgart.o<br>
-radeonfb.o &nbsp;(assuming Radeon hardware)<br>
-radeon.o &nbsp;(assuming Radeon hardware)<br>
-</div>
-<code></code> <br>
-Finally, MiniGLX reads a configuration file (by default,<code>
-/etc/miniglx.conf</code>) to determine basic configuration information.
-&nbsp;The configuration file may also be located in the directory
-specified by the <code>MINIGLX_CONF</code> environment variable).<br>
-<br>
 The remainder of this section describes the MiniGLX API functions.<br>
 <br>
 <h2>3.1 Initialization</h2>

docs/README.WIN32

@@ -1,155 +1,163 @@
-File: docs/README.WIN32
-
-Last updated: Mar 31, 2006 - Karl Schultz - kschultz@users.sourceforge.net
-
-Quick Start
------ -----
-
-Unzip the MesaLib, MesaGLUT, and MesaDemos ZIP files into the same
-directory.  The libs and demos build separately, so if you do not care
-about the demos or GLUT, you only need to unzip MesaLib.  If you unzip
-more than one ZIP file, they all need to be unzipped into the same
-directory.  Don't worry, you will not overwrite anything.
-
-The Windows build system uses Microsoft Visual Studio.  Project files
-for a specific version of Visual Studio are in their own directory in
-the top-level "windows" directory.  For example, Visual Studio 6 files
-are in windows/VC6.  If a directory does not exist for your version of
-Visual Studio, you can try importing the project files from an earlier
-version of Visual Studio.  At this time, project files exist for
-Version 6 and Version 7.  The code has been built with a beta version
-of Version 8 and it runs on 64-bit Windows.  If you want to try this,
-start by importing the VC7 files and create the 64-bit targets in the
-configuration manager.
-
-It is likely that the new and free Visual Studio Express can be used
-to build Mesa, but it hasn't been tried yet.  Start with the VC7
-project files.
-
-The project files to build the core Mesa library, Windows Mesa
-drivers, OSMesa, and GLU are in the mesa directory.  The project files
-to build GLUT and some demo programs are in the progs directory.
-
-Makefiles are no longer shipped or supported, but can be generated
-from the projects using Visual Studio.
-
-
-Windows Drivers
-------- -------
-
-At this time, only the GDI driver is known to work.  Most of the demos
-in progs/demos should work with this driver.
-
-Source code also exists in the tree for other drivers in
-src/mesa/drivers/windows, but the status of this code is unknown.
-
-The GDI driver operates basically by writing pixel spans into a DIB
-section and then blitting the DIB to the window.  The driver was
-recently cleaned up and rewitten and so may have bugs or may be
-missing some functionality.  The older versions of the CVS source may
-be useful in figuring out any problems, or report them to me.
-
-To build Mesa with the GDI driver, build the mesa, gdi, and glu
-projects in the Visual Studio workspace found at
-
-	windows/VC6/mesa/mesa.dsw
-or
-	windows/VC7/mesa/mesa.sln
-
-The osmesa DLL can also be built with the osmesa project.
-
-The build system creates a lib top-level directory and copies
-resulting LIB and DLL files to this lib directory.  The files are:
-
-	OPENGL32.LIB, GLU32.LIB, OSMESA32.LIB
-	OPENGL32.DLL, GLU32.DLL, OSMESA32.DLL
-
-If the MesaDemos ZIP file was extracted, the DLL files are also copied
-to the demos directory.  This facilitates running the demos as described
-below.
-
-
-GLUT and Demos
----- --- -----
-
-A Visual Studio workspace can be found at 
-
-	windows/VC6/progs/progs.dsw
-or
-	windows/VC7/progs/progs.sln
-
-It can be used to build GLUT and a few demos.  The GLUT lib and DLL
-are copied to the top-level lib directory, along with the Mesa libs.
-
-The demo build system expects to find the LIB files in the top level
-lib directory, so you must build the Mesa libs first.  The demo
-executables are placed in the demos directory, because some of them
-rely on data files found there.  Also, the Mesa lib DLL's were copied
-there by the Mesa lib build process.  Therefore, you should be able to
-simply run the demo executables from the demo directory.
-
-If you want to run the demos from the Visual Studio, you may have to
-change the startup directory and explicitly state where the executables are.
-
-You may also build all the demo programs by using a makefile.  Go to
-the progs/demos directory and make sure you have executed VCVARS32.BAT
-or whatever setup script is appropriate for your compiler.  Then,
-
-	nmake -f Makefile.win
-
-should build all the demos.
-
-
-Build System Notes
------ ------ -----
-
-VC6
----
-
-Visual Studio 6 does not recognize files with the .cc extension as C++
-language files, without a lot of unnatural tweaking.  So, the VC6
-build process uses custom build steps to compile these files in the
-GLU library.
-
-Two additional configurations are provided, Debug x86 and Release x86
-that activate the shader code compilation by defining SLANG_86.  It is
-unknown if and how this works.
-
-VC7
----
-
-The above-mentioned .cc problem does not exist in this version.
-
-
-General
--------
-
-After building, you can copy the above DLL files to a place in your
-PATH such as $SystemRoot/SYSTEM32.  If you don't like putting things
-in a system directory, place them in the same directory as the
-executable(s).  Be careful about accidentially overwriting files of
-the same name in the SYSTEM32 directory.
-
-The DLL files are built so that the external entry points use the
-stdcall calling convention.
-
-Static LIB files are not built.  The LIB files that are built with are
-the linker import files associated with the DLL files.
-
-The si-glu sources are used to build the GLU libs.  This was done
-mainly to get the better tessellator code.
-
-To build "mangled" Mesa, add the preprocessor define USE_MGL_NAMESPACE
-to the project settings.  You will also need to edit src/mesa.def to
-change all the gl* symbols to mgl*.  Because this is easy to do with a
-global replace operation in a text editor, no additional mangled
-version of mesa.def is maintained or shipped.
-
-If you have a Windows-related build problem or question, it is
-probably better to direct it to me (kschultz@users.sourceforge.net),
-rather than directly to the other Mesa developers.  I will help you as
-much as I can.  I also monitor the Mesa mailing lists and will answer
-questions in this area there as well.
-
-
-Karl Schultz
+File: docs/README.WIN32
+
+Last updated: Apr 25, 2007 - Karl Schultz - kschultz@users.sourceforge.net
+
+Quick Start
+----- -----
+
+Unzip the MesaLib, MesaGLUT, and MesaDemos ZIP files into the same
+directory.  The libs and demos build separately, so if you do not care
+about the demos or GLUT, you only need to unzip MesaLib.  If you unzip
+more than one ZIP file, they all need to be unzipped into the same
+directory.  Don't worry, you will not overwrite anything.
+
+The Windows build system uses Microsoft Visual Studio.  Project files
+for a specific version of Visual Studio are in their own directory in
+the top-level "windows" directory.  For example, Visual Studio 8 files
+are in windows/VC8.
+
+Support has been dropped for versions of Visual Studio prior to 8. The
+main reason is because Microsoft now provides a free compiler and
+developer environment.  Visual Studio Express can be found at
+
+http://msdn.microsoft.com/vstudio/express/visualc/default.aspx
+
+You'll also need the Platform SDK.  Instructions for obtaining and
+using the SDK with Visual Studio Express can be found at
+
+http://msdn.microsoft.com/vstudio/express/visualc/usingpsdk/
+
+If you are stuck using VC6 or VC7, you may start with these project
+files, but you may need to modify them to reflect changes in the
+Mesa source code tree.  If you sucessfully update the project files,
+please submit them to the author of this document so that they may
+be included in the next distribution. 
+
+The project files to build the core Mesa library, Windows Mesa
+drivers, OSMesa, and GLU are in the mesa directory.  The project files
+to build GLUT and some demo programs are in the progs directory.
+
+Makefiles are no longer shipped or supported, but can be generated
+from the projects using Visual Studio.
+
+
+Windows Drivers
+------- -------
+
+At this time, only the GDI driver is known to work.  Most of the demos
+in progs/demos should work with this driver.
+
+Source code also exists in the tree for other drivers in
+src/mesa/drivers/windows, but the status of this code is unknown.
+
+The GDI driver operates basically by writing pixel spans into a DIB
+section and then blitting the DIB to the window.  The driver was
+recently cleaned up and rewitten and so may have bugs or may be
+missing some functionality.  The older versions of the CVS source may
+be useful in figuring out any problems, or report them to me.
+
+To build Mesa with the GDI driver, build the mesa, gdi, and glu
+projects in the Visual Studio workspace found at
+
+	windows/VC8/mesa/mesa.sln
+
+The osmesa DLL can also be built with the osmesa project.
+
+The build system creates a lib top-level directory and copies
+resulting LIB and DLL files to this lib directory.  The files are:
+
+	OPENGL32.LIB, GLU32.LIB, OSMESA32.LIB
+	OPENGL32.DLL, GLU32.DLL, OSMESA32.DLL
+
+If the MesaDemos ZIP file was extracted, the DLL files are also copied
+to the demos directory.  This facilitates running the demos as described
+below.
+
+
+GLUT and Demos
+---- --- -----
+
+A Visual Studio workspace can be found at 
+
+	windows/VC8/progs/progs.sln
+
+It can be used to build GLUT and a few demos.  The GLUT lib and DLL
+are copied to the top-level lib directory, along with the Mesa libs.
+
+The demo build system expects to find the LIB files in the top level
+lib directory, so you must build the Mesa libs first.  The demo
+executables are placed in the demos directory, because some of them
+rely on data files found there.  Also, the Mesa lib DLL's were copied
+there by the Mesa lib build process.  Therefore, you should be able to
+simply run the demo executables from the demo directory.
+
+If you want to run the demos from the Visual Studio, you may have to
+change the startup directory and explicitly state where the executables are.
+
+You may also build all the demo programs by using a makefile.  Go to
+the progs/demos directory and make sure you have executed VCVARS32.BAT
+or whatever setup script is appropriate for your compiler.  Then,
+
+	nmake -f Makefile.win
+
+should build all the demos.
+
+
+Build System Notes
+----- ------ -----
+
+VC6 (not actively supported)
+---
+
+Visual Studio 6 does not recognize files with the .cc extension as C++
+language files, without a lot of unnatural tweaking.  So, the VC6
+build process uses custom build steps to compile these files in the
+GLU library.
+
+Two additional configurations are provided, Debug x86 and Release x86
+that activate the shader code compilation by defining SLANG_86.  It is
+unknown if and how this works.
+
+VC7 (not actively supported)
+---
+
+The above-mentioned .cc problem does not exist in this version.
+
+VC8
+---
+
+No notes.
+
+
+General
+-------
+
+After building, you can copy the above DLL files to a place in your
+PATH such as $SystemRoot/SYSTEM32.  If you don't like putting things
+in a system directory, place them in the same directory as the
+executable(s).  Be careful about accidentially overwriting files of
+the same name in the SYSTEM32 directory.
+
+The DLL files are built so that the external entry points use the
+stdcall calling convention.
+
+Static LIB files are not built.  The LIB files that are built with are
+the linker import files associated with the DLL files.
+
+The si-glu sources are used to build the GLU libs.  This was done
+mainly to get the better tessellator code.
+
+To build "mangled" Mesa, add the preprocessor define USE_MGL_NAMESPACE
+to the project settings.  You will also need to edit src/mesa.def to
+change all the gl* symbols to mgl*.  Because this is easy to do with a
+global replace operation in a text editor, no additional mangled
+version of mesa.def is maintained or shipped.
+
+If you have a Windows-related build problem or question, it is
+probably better to direct it to me (kschultz@users.sourceforge.net),
+rather than directly to the other Mesa developers.  I will help you as
+much as I can.  I also monitor the Mesa mailing lists and will answer
+questions in this area there as well.
+
+
+Karl Schultz

docs/RELNOTES-6.4.1

@@ -1,47 +0,0 @@
-
-		        Mesa 6.4.1 Release Notes
-
-
-Introduction
-------------
-
-Mesa uses an even/odd version number scheme like the Linux kernel.
-Odd numbered versions (such as 6.3) designate new developmental releases.
-Even numbered versions (such as 6.4) designate stable releases.
-
-
-6.4.1 is a bug-fix release.  See the VERSIONS file for details.
-
-
-
-GLUT tarball
-------------
-
-Starting with 6.4, the GLUT library sources are distributed in a separate
-tarball.  This was done at the request of Linux distro vendors who prefer
-to use freeglut.
-
-
-
-
-Driver			Status
-----------------------	----------------------
-DRI drivers		varies with the driver
-XMesa (Xlib)		implements OpenGL 1.5
-OSMesa (off-screen)	implements OpenGL 1.5
-Windows/Win32		implements OpenGL 1.5
-Glide (3dfx Voodoo1/2)  requires updates	
-SVGA			requires updates
-DJGPP			requires updates
-GGI			requires updates
-BeOS			requires updates
-Allegro			requires updates
-D3D			requires updates
-
-The drivers which require updates mostly need to be updated to work
-with the new gl_renderbuffer / gl_framebuffer infrastructure introduced
-in Mesa 6.3.
-
-
-----------------------------------------------------------------------
-$Id: RELNOTES-6.4.1,v 3.1 2006/02/03 17:21:54 brianp Exp $

docs/RELNOTES-6.4.2

@@ -1,47 +0,0 @@
-
-		        Mesa 6.4.2 Release Notes
-
-
-Introduction
-------------
-
-Mesa uses an even/odd version number scheme like the Linux kernel.
-Odd numbered versions (such as 6.3) designate new developmental releases.
-Even numbered versions (such as 6.4) designate stable releases.
-
-
-6.4.2 is a minor bug-fix release.  See the VERSIONS file for details.
-
-
-
-GLUT tarball
-------------
-
-Starting with 6.4, the GLUT library sources are distributed in a separate
-tarball.  This was done at the request of Linux distro vendors who prefer
-to use freeglut.
-
-
-
-
-Driver			Status
-----------------------	----------------------
-DRI drivers		varies with the driver
-XMesa (Xlib)		implements OpenGL 1.5
-OSMesa (off-screen)	implements OpenGL 1.5
-Windows/Win32		implements OpenGL 1.5
-Glide (3dfx Voodoo1/2)  requires updates	
-SVGA			requires updates
-DJGPP			requires updates
-GGI			requires updates
-BeOS			requires updates
-Allegro			requires updates
-D3D			requires updates
-
-The drivers which require updates mostly need to be updated to work
-with the new gl_renderbuffer / gl_framebuffer infrastructure introduced
-in Mesa 6.3.
-
-
-----------------------------------------------------------------------
-$Id: RELNOTES-6.4.2,v 3.1 2006/02/03 17:21:54 brianp Exp $

docs/RELNOTES-6.5

@@ -1,97 +0,0 @@
-
-			Mesa 6.5 Release Notes
-
-
-
-Introduction
-------------
-
-Mesa uses an even/odd version number scheme like the Linux kernel.
-Odd numbered versions (such as 6.5) designate new developmental releases.
-Even numbered versions (such as 6.4) designate stable releases.
-
-
-
-New Features
-------------
-
-OpenGL Shading language support
-   This includes the GL_ARB_shader_objects, GL_ARB_shading_language_100,
-   GL_ARB_vertex_shader and GL_ARB_fragment_shader extensions.  Most of
-   the work was done by Michal Krol.
-   There's probably a fair number of bugs since this is a pretty large,
-   complicated body of code.
-
-   The OpenGL 2.0 interface to these features will be implemented in a
-   future version of Mesa,
-
-GL_EXT_timer_query
-   Used to measure the time of OpenGL operations at high precision.
-   Only supported in the software/Xlib driver at this time.
-
-GL_EXT_packed_depth_stencil
-   Defines a new GL_DEPTH_STENCIL_EXT pixel format.
-
-GL_EXT_framebuffer_blit
-   A simplified glCopyPixels-like feature for copying pixel rectangles.
-
-GL_ARB_half_float_pixel
-   Adds a new half-precision floating point format for image transfers,
-   such as for glDrawPixels, glReadPixels, glTexImage, etc.
-
-
-
-Removed Extensions
-------------------
-
-The following extensions have been removed:
-
-  GL_HP_occlusion_test - this is superceded by GL_ARB_occlusion_query.
-
-
-
-Known Issues
-------------
-
-Rendering to depth textures will not work.  Rendering to GL_DEPTH_STENCIL
-textures should work.
-
-
-
-Driver Interface Changes
-------------------------
-
-Stencil: The Driver.StencilOp/Func/Mask() functions have been replaced by
-the two-sided versions: Driver.Stencil*Separate().
-
-Render-to-texture: The functions for rendering to textures have changed.
-
-
-
-To Do (someday) items
----------------------
- Switch to freeglut
- Increase MAX_DRAWBUFFERS
- Fix linux-glide target/driver.
- Fix lambda calculation for frag progs.
-
-
-
-Driver			Status
-----------------------	----------------------
-DRI drivers		varies with the driver
-XMesa/GLX (on Xlib)	implements OpenGL 1.5
-OSMesa (off-screen)	implements OpenGL 1.5
-Glide (3dfx Voodoo1/2)	implements OpenGL 1.3
-SVGA			implements OpenGL 1.3
-Wind River UGL		implements OpenGL 1.3
-Windows/Win32		implements OpenGL 1.5
-DJGPP			implements OpenGL 1.5
-GGI			implements OpenGL 1.3
-BeOS			implements OpenGL 1.5
-Allegro			needs updating
-D3D			needs updating
-
-
-----------------------------------------------------------------------
-$Id: RELNOTES-6.5,v 3.4 2006/03/29 04:53:02 brianp Exp $

docs/RELNOTES-6.5.1

@@ -1,60 +0,0 @@
-
-			Mesa 6.5.1 Release Notes
-
-
-
-Introduction
-------------
-
-Mesa uses an even/odd version number scheme like the Linux kernel.
-Odd numbered versions (such as 6.5) designate new developmental releases.
-Even numbered versions (such as 6.4) designate stable releases.
-
-
-
-Mesa 6.5.1 is a 6.5 follow-on development release mostly consisting of
-bug fixes (see the VERSIONS file).
-
-
-New Features
-------------
-
-  Intel i965 "broadwater" DRI driver
-
-  GL_APPLE_vertex_array_object - allows encapsulation of a set of vertex
-	arrays in an object.
-
-  GL_EXT_texture_sRGB - non-linearly mapped texture formats
-
-  GL_EXT_gpu_program_parameters - addes a few new functions for setting
-	multiple vertex/fragment program parameters with one call.
-
-
-
-To Do (someday) items
----------------------
- Switch to freeglut
- Increase MAX_DRAWBUFFERS
- Fix linux-glide target/driver.
- Fix lambda calculation for frag progs.
-
-
-
-Driver			Status
-----------------------	----------------------
-DRI drivers		varies with the driver
-XMesa/GLX (on Xlib)	implements OpenGL 1.5
-OSMesa (off-screen)	implements OpenGL 1.5
-Glide (3dfx Voodoo1/2)	implements OpenGL 1.3
-SVGA			implements OpenGL 1.3
-Wind River UGL		implements OpenGL 1.3
-Windows/Win32		implements OpenGL 1.5
-DJGPP			implements OpenGL 1.5
-GGI			implements OpenGL 1.3
-BeOS			implements OpenGL 1.5
-Allegro			needs updating
-D3D			needs updating
-
-
-----------------------------------------------------------------------
-$Id: RELNOTES-6.5.1,v 1.2 2006/08/18 20:24:54 brianp Exp $

docs/contents.html

@@ -25,6 +25,7 @@ a:visited {
 <ul>
 <li><a href="intro.html" target="MainFrame">Introduction</a>
 <li><a href="news.html" target="MainFrame">News</a>
+<LI><A HREF="developers.html" target="MainFrame">Developers</A>
 <li><a href="systems.html" target="MainFrame">Platforms and Drivers</a>
 <li><a href="license.html" target="MainFrame">License & Copyright</a>
 <li><a href="faq.html" target="MainFrame">FAQ</a>
@@ -63,16 +64,16 @@ a:visited {
 <b>Developer Topics</b>
 <ul>
 <li><a href="http://sourceforge.net/projects/mesa3d" target="_parent">SourceForge homepage</a>
-<li><a href="cvs_access.html" target="MainFrame">CVS Access</a>
-<li><a href="cvs_branches.html" target="MainFrame">CVS Branch Info</a>
+<li><a href="repository.html" target="MainFrame">Source Code Repository</a>
+<li><a href="memory.html" target="MainFrame">DRI Memory Management</a>
+<li><a href="shading.html" target="MainFrame">Shading Language</a>
 <li><a href="utilities.html" target="MainFrame">Utilities</a>
 <li><a href="helpwanted.html" target="MainFrame">Help Wanted</a>
 <li><a href="devinfo.html" target="MainFrame">Development Notes</a>
 <li><a href="sourcedocs.html" target="MainFrame">Source Documentation</a>
-<li><a href="subset.html" target="MainFrame">Subset Information</a>
 <li><a href="fbdev-dri.html" target="MainFrame">fbdev/DRI Environment</a>
+<li><a href="subset.html" target="MainFrame">Mesa Subset Driver</a>
 <li><a href="glfbdev-driver.html" target="MainFrame">glFBDev Driver</a>
-<LI><A HREF="custom.html" target="MainFrame">Custom Development</A>
 <LI><A HREF="dispatch.html" target="MainFrame">GL Dispatch</A>
 </ul>