docs: add sha256 checksums for 17.0.7

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

.travis.yml

@@ -14,6 +14,8 @@ env:
     - XORGMACROS_VERSION=util-macros-1.19.0
     - GLPROTO_VERSION=glproto-1.4.17
     - DRI2PROTO_VERSION=dri2proto-2.8
+    - DRI3PROTO_VERSION=dri3proto-1.0
+    - PRESENTPROTO_VERSION=presentproto-1.0
     - LIBPCIACCESS_VERSION=libpciaccess-0.13.4
     - LIBDRM_VERSION=libdrm-2.4.74
     - XCBPROTO_VERSION=xcb-proto-1.11
@@ -33,7 +35,7 @@ matrix:
         - BUILD=make
         - MAKEFLAGS="-j4"
         - MAKE_CHECK_COMMAND="make check"
-        - DRI_LOADERS="--enable-glx --enable-gbm --enable-egl --with-platforms=x11,drm,surfaceless,wayland --enable-osmesa"
+        - DRI_LOADERS="--enable-glx --enable-gbm --enable-egl --with-egl-platforms=x11,drm,surfaceless,wayland --enable-osmesa"
         - DRI_DRIVERS="i915,i965,radeon,r200,swrast,nouveau"
         - GALLIUM_ST="--enable-dri --disable-opencl --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx --disable-gallium-osmesa"
         - GALLIUM_DRIVERS=""
@@ -179,9 +181,13 @@ matrix:
         - MAKE_CHECK_COMMAND="make -C src/gtest check && make -C src/intel check"
         - LLVM_VERSION=3.9
         - LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
-        - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl --with-platforms=x11,wayland"
-        - DRI_DRIVERS=""
-        - GALLIUM_ST="--enable-dri --enable-dri3 --disable-opencl --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx --disable-gallium-osmesa"
+        # XXX: we want to test the WSI, but those are enabled via the EGL toggles
+        # XXX: Platform X11 dependencies are checked when --enable-glx is set
+        - DRI_LOADERS="--enable-glx --disable-gbm --enable-egl --with-egl-platforms=x11,wayland"
+        # i965 is needed for Intel's Vulkan driver (anv)
+        - DRI_DRIVERS="i965"
+        # XXX: enable DRI for EGL above
+        - GALLIUM_ST="--enable-dri --disable-opencl --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx --disable-gallium-osmesa"
         - GALLIUM_DRIVERS=""
         - VULKAN_DRIVERS="intel,radeon"
       addons:
@@ -297,6 +303,14 @@ install:
   - tar -jxvf $DRI2PROTO_VERSION.tar.bz2
   - (cd $DRI2PROTO_VERSION && ./configure --prefix=$HOME/prefix && make install)
 
+  - wget $XORG_RELEASES/proto/$DRI3PROTO_VERSION.tar.bz2
+  - tar -jxvf $DRI3PROTO_VERSION.tar.bz2
+  - (cd $DRI3PROTO_VERSION && ./configure --prefix=$HOME/prefix && make install)
+
+  - wget $XORG_RELEASES/proto/$PRESENTPROTO_VERSION.tar.bz2
+  - tar -jxvf $PRESENTPROTO_VERSION.tar.bz2
+  - (cd $PRESENTPROTO_VERSION && ./configure --prefix=$HOME/prefix && make install)
+
   - wget $XCB_RELEASES/$XCBPROTO_VERSION.tar.bz2
   - tar -jxvf $XCBPROTO_VERSION.tar.bz2
   - (cd $XCBPROTO_VERSION && ./configure --prefix=$HOME/prefix && make install)

Android.common.mk

@@ -30,6 +30,7 @@ LOCAL_C_INCLUDES += \
 	$(MESA_TOP)/include
 
 MESA_VERSION := $(shell cat $(MESA_TOP)/VERSION)
+# define ANDROID_VERSION (e.g., 4.0.x => 0x0400)
 LOCAL_CFLAGS += \
 	-Wno-unused-parameter \
 	-Wno-date-time \
@@ -38,10 +39,12 @@ LOCAL_CFLAGS += \
 	-Wno-initializer-overrides \
 	-Wno-mismatched-tags \
 	-DPACKAGE_VERSION=\"$(MESA_VERSION)\" \
-	-DPACKAGE_BUGREPORT=\"https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa\"
+	-DPACKAGE_BUGREPORT=\"https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa\" \
+	-DANDROID_VERSION=0x0$(MESA_ANDROID_MAJOR_VERSION)0$(MESA_ANDROID_MINOR_VERSION)
 
 LOCAL_CFLAGS += \
 	-DENABLE_SHADER_CACHE \
+	-D__STDC_LIMIT_MACROS \
 	-DHAVE___BUILTIN_EXPECT \
 	-DHAVE___BUILTIN_FFS \
 	-DHAVE___BUILTIN_FFSLL \
@@ -58,17 +61,9 @@ LOCAL_CFLAGS += \
 	-DHAVE___BUILTIN_UNREACHABLE \
 	-DHAVE_PTHREAD=1 \
 	-DHAVE_DLOPEN \
-	-DHAVE_DL_ITERATE_PHDR \
 	-fvisibility=hidden \
 	-Wno-sign-compare
 
-LOCAL_CPPFLAGS += \
-	-D__STDC_CONSTANT_MACROS \
-	-D__STDC_FORMAT_MACROS \
-	-D__STDC_LIMIT_MACROS \
-	-Wno-error=non-virtual-dtor \
-	-Wno-non-virtual-dtor
-
 # mesa requires at least c99 compiler
 LOCAL_CONLYFLAGS += \
 	-std=c99
@@ -76,12 +71,17 @@ LOCAL_CONLYFLAGS += \
 ifeq ($(strip $(MESA_ENABLE_ASM)),true)
 ifeq ($(TARGET_ARCH),x86)
 LOCAL_CFLAGS += \
-	-DUSE_X86_ASM
+	-DUSE_X86_ASM \
 
 endif
 endif
 
 ifeq ($(MESA_ENABLE_LLVM),true)
+LOCAL_CFLAGS += \
+	-D__STDC_CONSTANT_MACROS \
+	-D__STDC_FORMAT_MACROS \
+	-D__STDC_LIMIT_MACROS
+
   ifeq ($(MESA_ANDROID_MAJOR_VERSION),5)
     LOCAL_CFLAGS += -DHAVE_LLVM=0x0305 -DMESA_LLVM_VERSION_PATCH=2
     ELF_INCLUDES := external/elfutils/0.153/libelf
@@ -104,8 +104,17 @@ LOCAL_SHARED_LIBRARIES += libdrm
 endif
 endif
 
-LOCAL_CFLAGS_32 += -DDEFAULT_DRIVER_DIR=\"/system/lib/$(MESA_DRI_MODULE_REL_PATH)\"
-LOCAL_CFLAGS_64 += -DDEFAULT_DRIVER_DIR=\"/system/lib64/$(MESA_DRI_MODULE_REL_PATH)\"
+LOCAL_CPPFLAGS += \
+	$(if $(filter true,$(MESA_LOLLIPOP_BUILD)),-D_USING_LIBCXX) \
+	-Wno-error=non-virtual-dtor \
+	-Wno-non-virtual-dtor
+
+ifeq ($(MESA_LOLLIPOP_BUILD),true)
+  LOCAL_CFLAGS_32 += -DDEFAULT_DRIVER_DIR=\"/system/lib/$(MESA_DRI_MODULE_REL_PATH)\"
+  LOCAL_CFLAGS_64 += -DDEFAULT_DRIVER_DIR=\"/system/lib64/$(MESA_DRI_MODULE_REL_PATH)\"
+else
+  LOCAL_CFLAGS += -DDEFAULT_DRIVER_DIR=\"/system/lib/$(MESA_DRI_MODULE_REL_PATH)\"
+endif
 
 # uncomment to keep the debug symbols
 #LOCAL_STRIP_MODULE := false

Android.mk

@@ -24,7 +24,7 @@
 # BOARD_GPU_DRIVERS should be defined.  The valid values are
 #
 #   classic drivers: i915 i965
-#   gallium drivers: swrast freedreno i915g nouveau r300g r600g radeonsi vc4 virgl vmwgfx
+#   gallium drivers: swrast freedreno i915g ilo nouveau r300g r600g radeonsi vc4 virgl vmwgfx
 #
 # The main target is libGLES_mesa.  For each classic driver enabled, a DRI
 # module will also be built.  DRI modules will be loaded by libGLES_mesa.
@@ -32,6 +32,15 @@
 MESA_TOP := $(call my-dir)
 
 MESA_ANDROID_MAJOR_VERSION := $(word 1, $(subst ., , $(PLATFORM_VERSION)))
+MESA_ANDROID_MINOR_VERSION := $(word 2, $(subst ., , $(PLATFORM_VERSION)))
+MESA_ANDROID_VERSION := $(MESA_ANDROID_MAJOR_VERSION).$(MESA_ANDROID_MINOR_VERSION)
+ifeq ($(filter 1 2 3 4,$(MESA_ANDROID_MAJOR_VERSION)),)
+MESA_LOLLIPOP_BUILD := true
+else
+define local-generated-sources-dir
+$(call local-intermediates-dir)
+endef
+endif
 
 MESA_DRI_MODULE_REL_PATH := dri
 MESA_DRI_MODULE_PATH := $(TARGET_OUT_SHARED_LIBRARIES)/$(MESA_DRI_MODULE_REL_PATH)
@@ -41,7 +50,7 @@ MESA_COMMON_MK := $(MESA_TOP)/Android.common.mk
 MESA_PYTHON2 := python
 
 classic_drivers := i915 i965
-gallium_drivers := swrast freedreno i915g nouveau r300g r600g radeonsi vmwgfx vc4 virgl
+gallium_drivers := swrast freedreno i915g ilo nouveau r300g r600g radeonsi vmwgfx vc4 virgl
 
 MESA_GPU_DRIVERS := $(strip $(BOARD_GPU_DRIVERS))
 
@@ -88,8 +97,7 @@ SUBDIRS := \
 	src/egl \
 	src/amd \
 	src/intel \
-	src/mesa/drivers/dri \
-	src/vulkan
+	src/mesa/drivers/dri
 
 INC_DIRS := $(call all-named-subdir-makefiles,$(SUBDIRS))
 

Makefile.am

@@ -27,7 +27,7 @@ AM_DISTCHECK_CONFIGURE_FLAGS = \
 	--enable-egl \
 	--enable-gallium-tests \
 	--enable-gallium-osmesa \
-	--enable-llvm \
+	--enable-gallium-llvm \
 	--enable-gbm \
 	--enable-gles1 \
 	--enable-gles2 \
@@ -41,9 +41,9 @@ AM_DISTCHECK_CONFIGURE_FLAGS = \
 	--enable-xa \
 	--enable-xvmc \
 	--enable-llvm-shared-libs \
-	--with-platforms=x11,wayland,drm,surfaceless \
+	--with-egl-platforms=x11,wayland,drm,surfaceless \
 	--with-dri-drivers=i915,i965,nouveau,radeon,r200,swrast \
-	--with-gallium-drivers=i915,nouveau,r300,r600,radeonsi,freedreno,svga,swrast,vc4,virgl,swr,etnaviv,imx \
+	--with-gallium-drivers=i915,ilo,nouveau,r300,r600,radeonsi,freedreno,svga,swrast,vc4,virgl,swr,etnaviv,imx \
 	--with-vulkan-drivers=intel,radeon
 
 ACLOCAL_AMFLAGS = -I m4

REVIEWERS

@@ -58,7 +58,6 @@ F:	src/compiler/nir/
 
 DOCUMENTATION
 R: Emil Velikov <emil.l.velikov@gmail.com>
-R: Eric Engestrom <eric@engestrom.ch>
 F: docs/
 F: doxygen/
 
@@ -70,10 +69,6 @@ DRI LOADER
 R: Emil Velikov <emil.l.velikov@gmail.com>
 F: src/loader/
 
-EGL
-R: Eric Engestrom <eric@engestrom.ch>
-F: src/egl/
-
 GALLIUM LOADER
 R: Emil Velikov <emil.l.velikov@gmail.com>
 F: src/gallium/auxiliary/pipe-loader/
@@ -85,7 +80,6 @@ F: src/gallium/targets/
 
 AUTOCONF BUILD
 R: Emil Velikov <emil.l.velikov@gmail.com>
-F: autogen.sh
 F: configure.ac
 F: */Automake.inc
 F: */Makefile.*am

VERSION

@@ -1 +1 @@
-17.1.2
+17.0.7

appveyor.yml

@@ -34,13 +34,13 @@ branches:
 clone_depth: 100
 
 cache:
-- win_flex_bison-2.5.9.zip
+- win_flex_bison-2.4.5.zip
 - llvm-3.3.1-msvc2013-mtd.7z
 
 os: Visual Studio 2013
 
 environment:
-  WINFLEXBISON_ARCHIVE: win_flex_bison-2.5.9.zip
+  WINFLEXBISON_ARCHIVE: win_flex_bison-2.4.5.zip
   LLVM_ARCHIVE: llvm-3.3.1-msvc2013-mtd.7z
 
 install:
@@ -48,13 +48,11 @@ install:
 - python --version
 - python -m pip --version
 # Install Mako
-- python -m pip install Mako==1.0.6
+- python -m pip install --egg Mako
 # Install pywin32 extensions, needed by SCons
 - python -m pip install pypiwin32
-# Install python wheels, necessary to install SCons via pip
-- python -m pip install wheel
 # Install SCons
-- python -m pip install scons==2.5.1
+- python -m pip install --egg scons==2.4.1
 - scons --version
 # Install flex/bison
 - if not exist "%WINFLEXBISON_ARCHIVE%" appveyor DownloadFile "https://downloads.sourceforge.net/project/winflexbison/old_versions/%WINFLEXBISON_ARCHIVE%"

bin/.cherry-ignore

@@ -1,4 +1,107 @@
-# This commit depends on 9fd9a7d0ba3 and 678d568c7b2, neither of which is in branch.
-b84b631c6381d9b36bca5d0e7cc67dd23af188c1 radeonsi: load patch_id for TES-as-ES when exporting for PS
-# This commit addressed an earlier commit 126d5ad which did not land in branch.
+# The commit addressed an earlier commit ccdd5b3738e which did not land in branch.
+d49d275c415d60ae08dc3e52d8db11f19a44010f anv/blorp: Don't sanitize the swizzle for blorp_clear
+# The commit addressed an earlier commit 0567ab0407e which did not land in branch.
+# A stable specific backported patch will follow later ...
+bc5d587a80b64fb3e0a5ea8067e6317fbca2bbc5 radv: Invalidate L2 for TRANSFER_WRITE barriers
+# stable: the commit depends on earlier commit 656e30b6860 which did
+# 	  not land in branch, and some other dependencies.
+d2d6cf6c8387ac06c8559027f57683a61b48671b anv: Add the pci_id into the shader cache UUID
+# stable: 17.1 nomination only. Fixes earlier commit 0b613c20 which
+# 	  did not land in branch.
+d4601b0efc7f5e24e3f39fefa8e29e79560245ce freedreno: fix crash if ctx torn down with no rendering
+# stable: 17.1 nomination only. the commit depends on earlier commit
+# 	  7748c3f5eb1 which did not land in branch and the part that
+# 	  could be merged is not really providing anything relevant to
+# 	  stable.
+b81d85f1754928139f9f01474495e024946aa1b4 configure.ac: Fix typos.
+# extra: this reverts a commit in stable only because a new feature in
+# 	 master replaces it.
+e75001811e3b66986b4ede165a0fdde703d4f05b Revert "etnaviv: Cannot render to rb-swapped formats"
+# extra: the commit depends on earlier commits which did not land in
+#	 branch.
+dee31311eb024a636466e359b43d3a67b0135f32 Revert "i965/fs: Don't emit SEL instructions for type-converting MOVs."
+# fixes: finds 2 commit references but it is really only one, and only
+#        in master.
+2b3c490e23a6cd7f4f6bb489267c2b9b4fde5b20 radv: fix typo in a2b10g10r10 fast clear calculation
+# fixes: removes unused symbols but it doesn't really add nor fix
+#        anything relevant.
+9807e9dea67a60ab8ee04741c75b748eade582ee anv: remove unused anv_dispatch_table dtable
+# fixes: removes unused symbols but it doesn't really add nor fix
+#        anything relevant.
+320561bd831b81843e732d38d2b254aa3b25f2f6 radv: remove unused radv_dispatch_table dtable
+# fixes: it just makes a local function static.
+8b79f0ed0812a3a80dd91e47112fd722bd2d6978 radv: make radv_resolve_entrypoint static
+# fixes: reported only because referes to fixes in 2 commits, but they
+#        are not in stable.
+3f2cb699cfe0481f214c709b5a1375caf0a9c7fe android: vulkan: add support for libmesa_vulkan_util
+# fixes: reported only because referes to fixes in 2 commits, but they
+#        are not in stable.
+61c38d14b7b1d0ccacc440340ee0b1bc4454eca2 android: r600: fix libmesa_amd_common dependency
+# fixes: removes unused symbols but it doesn't really add nor fix
+#        anything relevant.
+b69a03e12aa38ed5d8b60a056630ed445f6097dc i965: remove dead brw_new_shader() declaration
+# fixes: it just cleans .gitignore.
+f282ace67862c0633d0a8135e4808867740d0d39 i965: remove i965_symbols_test reference from .gitignore
+# fixes: reported only because referes to fixes in 2 commits, but they
+#        are not in stable.
+15603055fb36a630cf3023219e9dd5c4a49c0596 anv: automake: ensure that the destination directory is created
+# fixes: reported only because referes to fixes in 2 commits, but they
+#        are not in stable.
+a6840efc096bd26e92bcee1a50515d845988a2f9 anv: provide required gem stubs for the tests
+# stable: 17.1 nomination only.
+65e0c3fba74ee98cacadbba4bd005b930609b65e radeonsi/gfx9: fix texture buffer objects and image buffers with IDXEN==0
+5c94779585e24e8bd1bd41707521584af4251de3 radeonsi/gfx9: fix most things wrong with shader images
+482e6b07cc6ce4b2ceac8188be19dbf252eaecde radeonsi/gfx9: fix 1D array shader images
+8e8570a9e8bae7f4d3ad623475dfadc715a828d7 radeonsi/gfx9: add a workaround for viewing a slice of 3D as a 2D image
+60a20e6879e4ce0911b12848ffd9e372f096590e radeonsi/gfx9: set MAX_PRIMGRP_IN_WAVE in the correct register
+80814819c28353a38c03d4cdba39983b8cf260ac radeonsi/gfx9: don't set deprecated field PARTIAL_ES_WAVE_ON
+f466683cb07796fa89f96ef87a6f076218ae6db8 radeonsi/gfx9: fix gl_ViewportIndex
+283a1d1e27b5456cfda848a54b9d74be0993e038 radeonsi/gfx9: make some PA & DB registers match the closed Vulkan driver
+# stable: 17.1 nomination only. Fixes earlier commit 651ec926fc1 which
+# 	  did not land in branch.
+c43b4bc85eddba8bc31665cfee5928bed8343516 anv: Don't place scratch buffers above the 32-bit boundary
+# stable: 17.1 nomination only. Disk cache doesn't feature yet in branch.
+ce412371513c90bf9156f22c3567ee57750ef264 disk_cache: reduce default cache size to 5% of filesystem
+4e1f3afea9bdeddb0d21f00d25319bce580d80c3 disk_cache: use block size rather than file size
+22fa3d90a92c1628215d0f5fccbe1116d4f5147f util/disk_cache: remove percentage based max cache limit
+# stable: 17.1 nomination only. Fixes earlier commit 68d6d097f15 which
+# 	  did not land in branch.
+69e6eab6533ff48f72223cd21ef640242c52598b winsys/amdgpu: fix Polaris12 (RX 550) breakage
+# stable: 17.1 nomination only. Contributes to earlier commit
+# 	  3f0d69af20e which did not land in branch.
+2add79a73291e40621081b9a12938ac1931b9e96 radv: apply the tess+GS hang workaround to Polaris12 as well
+# stable: 17.1 nomination only. Reverts earlier commit
+#         c5bf7cb52942cb7df9f5d73746ffbf3c102d12cc which did not land
+#         in branch.
+1456da91c8a14f77dd347981e2bc95e0644e0fd2 Revert "mesa: Require mipmap completeness for glCopyImageSubData(), sometimes."
+# stable: 17.1 nomination only. Fixes a crash triggered by earlier
+#         commit 7c3b8ed87859bfdfb985d21685115a729f9cd138 which did
+#         not land in branch.
+bc074a45180eddf30ea723bbdf89895e2c7684ca i965: Don't try to unmap NULL program cache BO.
+# stable: 17.1 nomination only. Fixes a regression caused by commit
+#         bdd644976952 which did not land in branch.
+854ed47f3e1501e4cc87bf9f19c6d4a1ad2bab08 radeonsi: mark fast-cleared textures as compressed when dirtying
+# stable: 17.1 nomination only. MSAA was enabled by 1832ef6cd9b which
+#         did not land in branch.
+f52e63069a3fad23e03d42306a42bd20f0159da3 swr: move msaa resolve to generalized StoreTile
+# stable: 17.1 nomination only. 17.0 doesn't support
+#         VK_KHR_push_descriptor, so it doesn't need this patch.
+5ff48581119258214801de24a327bdd6a29e0ccc radv/meta: fix restoring a push descriptor set
+# fixes:  Fixes earlier commit 126d5ad which did not land in branch.
 9da104593386f6e8ddec8f0d9d288aceb8908fe1 radv: fix regression in descriptor set freeing.
+# stable: Fixes earlier commit 4d30024238e which did not land in
+#         branch.
+d884d1a6540ec0f60768c30df47f0228a37ea61c vc4: Only build the NEON code on arm32.
+# stable: Fixes earlier commit 6403e376511 which did not land in
+#         branch.
+6f21b5601cc1260eac53f65c8941b3aa66d0f5e9 i965: Solve Android native fence fd double close
+# stable: Depends on earlier commit 5f99c490089 which did not land in
+#         branch.
+0549ea15ec380f3ca6df76ce53ff4c30bfc21dbf radeonsi: fix primitive ID in fragment shader when using tessellation
+# stable: Depends on earlier commit 9fd9a7d0ba3 which did not land in
+#         branch.
+b84b631c6381d9b36bca5d0e7cc67dd23af188c1 radeonsi: load patch_id for TES-as-ES when exporting for PS
+# stable: The bug that they fixed is probably more benign than a
+#         possible assertion in the X server.
+19b61799e3d06795d783b34fdbbf8474ef1e9a7c st/mesa: don't cast the incomplete framebufer to st_framebuffer
+2f0450c627e5158d49aa1320eed9a5f6cb184838 radeonsi: add new vega10 pci ids

bin/bugzilla_mesa.sh

@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
 
 # This script is used to generate the list of fixed bugs that
 # appears in the release notes files, with HTML formatting.
@@ -11,6 +11,8 @@
 # $ bin/bugzilla_mesa.sh mesa-9.0.2..mesa-9.0.3
 # $ bin/bugzilla_mesa.sh mesa-9.0.2..mesa-9.0.3 > bugfixes
 # $ bin/bugzilla_mesa.sh mesa-9.0.2..mesa-9.0.3 | tee bugfixes
+# $ DRYRUN=yes bin/bugzilla_mesa.sh mesa-9.0.2..mesa-9.0.3
+# $ DRYRUN=yes bin/bugzilla_mesa.sh mesa-9.0.2..mesa-9.0.3 | wc -l
 
 
 # regex pattern: trim before bug number
@@ -19,17 +21,29 @@ trim_before='s/.*show_bug.cgi?id=\([0-9]*\).*/\1/'
 # regex pattern: reconstruct the url
 use_after='s,^,https://bugs.freedesktop.org/show_bug.cgi?id=,'
 
-echo "<ul>"
-echo ""
-
 # extract fdo urls from commit log
-git log $* | grep 'bugs.freedesktop.org/show_bug' | sed -e $trim_before | sort -n -u | sed -e $use_after |\
-while read url
-do
-	id=$(echo $url | cut -d'=' -f2)
-	summary=$(wget --quiet -O - $url | grep -e '<title>.*</title>' | sed -e 's/ *<title>[0-9]\+ &ndash; \(.*\)<\/title>/\1/')
-	echo "<li><a href=\"$url\">Bug $id</a> - $summary</li>"
-	echo ""
-done
+urls=$(git log $* | grep 'bugs.freedesktop.org/show_bug' | sed -e $trim_before | sort -n -u | sed -e $use_after)
 
-echo "</ul>"
+# if DRYRUN is set to "yes", simply print the URLs and don't fetch the
+# details from fdo bugzilla.
+#DRYRUN=yes
+
+if [ "x$DRYRUN" = xyes ]; then
+	for i in $urls
+	do
+		echo $i
+	done
+else
+	echo "<ul>"
+	echo ""
+
+	for i in $urls
+	do
+		id=$(echo $i | cut -d'=' -f2)
+		summary=$(wget --quiet -O - $i | grep -e '<title>.*</title>' | sed -e 's/ *<title>[0-9]\+ &ndash; \(.*\)<\/title>/\1/')
+		echo "<li><a href=\"$i\">Bug $id</a> - $summary</li>"
+		echo ""
+	done
+
+	echo "</ul>"
+fi

bin/get-extra-pick-list.sh

@@ -30,15 +30,7 @@ do
 		if grep -q ^$candidate already_picked ; then
 			continue
 		fi
-		# Or if it isn't in the ignore list.
-		if [ -f bin/.cherry-ignore ] ; then
-			if grep -q ^$candidate bin/.cherry-ignore ; then
-				continue
-			fi
-		fi
-		printf "Commit \"%s\" references %s\n" \
-		       "`git log -n1 --pretty=oneline $candidate`" \
-		       "$sha"
+		echo Commit $candidate references $sha
 	done
 done
 

bin/get-fixes-pick-list.sh

@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
 
 # Script for generating a list of candidates [referenced by a Fixes tag] for
 # cherry-picking to a stable branch
@@ -24,52 +24,35 @@ git log --reverse --grep="cherry picked from commit" $latest_branchpoint..HEAD |
 git log --reverse --pretty=%H -i --grep="fixes:" $latest_branchpoint..origin/master |\
 while read sha
 do
-	# Check to see whether the patch is on the ignore list ...
-	if [ -f bin/.cherry-ignore ] ; then
-		if grep -q ^$sha bin/.cherry-ignore ; then
-			continue
-		fi
+	# For each one try to extract the tag
+	fixes_count=`git show $sha | grep -i "fixes:" | wc -l`
+	if [ "x$fixes_count" != x1 ] ; then
+		echo WARNING: Commit $sha has nore than one Fixes tag
 	fi
+	fixes=`git show $sha | grep -i "fixes:" | head -n 1`
+	# The following sed/cut combination is borrowed from GregKH
+	id=`echo ${fixes} | sed -e 's/^[ \t]*//' | cut -f 2 -d ':' | sed -e 's/^[ \t]*//' | cut -f 1 -d ' '`
 
-	# Skip if it has been already cherry-picked.
-	if grep -q ^$sha already_picked ; then
+	# Bail out if we cannot find suitable id.
+	# Any specific validation the $id is valid and not some junk, is
+	# implied with the follow up code
+	if [ "x$id" = x ] ; then
 		continue
 	fi
 
-	# For each one try to extract the tag
-	fixes_count=`git show $sha | grep -i "fixes:" | wc -l`
-	warn=`(test $fixes_count -gt 1 && echo $fixes_count) || echo 0`
-	while [ $fixes_count -gt 0 ] ; do
-		fixes=`git show $sha | grep -i "fixes:" | tail -n $fixes_count`
-		fixes_count=$(($fixes_count-1))
-		# The following sed/cut combination is borrowed from GregKH
-		id=`echo ${fixes} | sed -e 's/^[ \t]*//' | cut -f 2 -d ':' | sed -e 's/^[ \t]*//' | cut -f 1 -d ' '`
+	# Check if the offending commit is in branch.
 
-		# Bail out if we cannot find suitable id.
-		# Any specific validation the $id is valid and not some junk, is
-		# implied with the follow up code
-		if [ "x$id" = x ] ; then
+	# Be that cherry-picked ...
+	# ... or landed before the branchpoint.
+	if grep -q ^$id already_picked ||
+	   grep -q ^$id already_landed ; then
+
+		# Finally nominate the fix if it hasn't landed yet.
+		if grep -q ^$sha already_picked ; then
 			continue
 		fi
 
-		# Check if the offending commit is in branch.
-
-		# Be that cherry-picked ...
-		# ... or landed before the branchpoint.
-		if grep -q ^$id already_picked ||
-		   grep -q ^$id already_landed ; then
-
-			printf "Commit \"%s\" fixes %s\n" \
-			       "`git log -n1 --pretty=oneline $sha`" \
-			       "$id"
-			warn=$(($warn-1))
-		fi
-
-	done
-
-	if [ $warn -gt 0 ] ; then
-		printf "WARNING: Commit \"%s\" has more than one Fixes tag\n" \
-		       "`git log -n1 --pretty=oneline $sha`"
+		echo Commit $sha fixes $id
 	fi
 
 done

bin/shortlog_mesa.sh

@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
 
 # This script is used to generate the list of changes that
 # appears in the release notes files, with HTML formatting.
@@ -10,7 +10,7 @@
 # $ bin/shortlog_mesa.sh mesa-9.0.2..mesa-9.0.3 | tee changes
 
 
-in_log=0
+typeset -i in_log=0
 
 git shortlog $* | while read l
 do

docs/README.WIN32

@@ -39,7 +39,7 @@ steps that work as of this writing.
   get pywin32-218.4.win-amd64-py2.7.exe
 - install git
 - download mesa from git
-  see https://www.mesa3d.org/repository.html
+  see http://www.mesa3d.org/repository.html
 - run scons
 
 General

docs/application-issues.html

@@ -33,7 +33,7 @@ without a depth buffer.
 <p>
 Mesa 9.1.2 and later (will) support a DRI configuration option to work around
 this issue.
-Using the <a href="https://dri.freedesktop.org/wiki/DriConf">driconf</a> tool,
+Using the <a href="http://dri.freedesktop.org/wiki/DriConf">driconf</a> tool,
 set the "Create all visuals with a depth buffer" option before running Topogun.
 Then, all GLX visuals will be created with a depth buffer.
 </p>

docs/autoconf.html

@@ -118,7 +118,7 @@ directories. For example, <code>LDFLAGS="-L/usr/X11R6/lib"</code>.</p>
 
 <dt><code>PKG_CONFIG_PATH</code></dt>
 <dd><p>The
-<code>pkg-config</code> utility is a hard requirement for configuring and
+<code>pkg-config</code> utility is a hard requirement for cofiguring and
 building mesa. It is used to search for external libraries
 on the system. This environment variable is used to control the search
 path for <code>pkg-config</code>. For instance, setting
@@ -137,7 +137,7 @@ There are also a few general options for altering the Mesa build:
 hasn't already set them via the CFLAGS/CXXFLAGS) and macros to aid in
 debugging the Mesa libraries.</p>
 
-<p>Note that enabling this option can lead to noticeable loss of performance.</p>
+<p>Note that enabling this option can lead to noticable loss of performance.</p>
 
 <dt><code>--disable-asm</code></dt>
 <dd><p>There are assembly routines

docs/bugs.html

@@ -18,7 +18,7 @@
 
 <p>
 The Mesa bug database is hosted on
-<a href="https://freedesktop.org">freedesktop.org</a>.
+<a href="http://freedesktop.org">freedesktop.org</a>.
 The old bug database on SourceForge is no longer used.
 </p>
 

docs/codingstyle.html

@@ -58,7 +58,7 @@ and not <tt>a=b+c;</tt>
 
 <li>Use comments wherever you think it would be helpful for other developers.
 Several specific cases and style examples follow.  Note that we roughly
-follow <a href="https://www.stack.nl/~dimitri/doxygen/">Doxygen</a> conventions.
+follow <a href="http://www.stack.nl/~dimitri/doxygen/">Doxygen</a> conventions.
 <br>
 <br>
 Single-line comments:
@@ -120,7 +120,7 @@ the opening brace goes on the next line by itself (see above.)
    _mesa_foo_bar()  - an internal non-static Mesa function
 </pre>
 
-<li>Constants, macros and enum names are ALL_UPPERCASE, with _ between
+<li>Constants, macros and enumerant names are ALL_UPPERCASE, with _ between
 words.
 <li>Mesa usually uses camel case for local variables (Ex: "localVarname")
 while gallium typically uses underscores (Ex: "local_var_name").

docs/contents.html

@@ -53,7 +53,7 @@
 <li><a href="lists.html" target="_parent">Mailing Lists</a>
 <li><a href="bugs.html" target="_parent">Bug Database</a>
 <li><a href="webmaster.html" target="_parent">Webmaster</a>
-<li><a href="https://dri.freedesktop.org/" target="_parent">Mesa/DRI Wiki</a>
+<li><a href="http://dri.freedesktop.org/" target="_parent">Mesa/DRI Wiki</a>
 </ul>
 
 <b>User Topics</b>
@@ -83,23 +83,23 @@
 <li><a href="devinfo.html" target="_parent">Development Notes</a>
 <li><a href="codingstyle.html" target="_parent">Coding Style</a>
 <li><a href="submittingpatches.html" target="_parent">Submitting patches</a>
-<li><a href="releasing.html" target="_parent">Releasing process</a>
 <li><a href="sourcedocs.html" target="_parent">Source Documentation</a>
 <li><a href="dispatch.html" target="_parent">GL Dispatch</a>
 </ul>
 
 <b>Links</b>
 <ul>
-<li><a href="https://www.opengl.org" target="_parent">OpenGL website</a>
-<li><a href="https://dri.freedesktop.org" target="_parent">DRI website</a>
-<li><a href="https://www.freedesktop.org" target="_parent">freedesktop.org</a>
-<li><a href="https://planet.freedesktop.org" target="_parent">Developer blogs</a>
+<li><a href="http://www.opengl.org" target="_parent">OpenGL website</a>
+<li><a href="http://dri.freedesktop.org" target="_parent">DRI website</a>
+<li><a href="http://www.freedesktop.org" target="_parent">freedesktop.org</a>
+<li><a href="http://planet.freedesktop.org" target="_parent">Developer blogs</a>
 </ul>
 
 <b>Hosted by:</b>
 <br>
 <blockquote>
-<a href="https://freedesktop.org" target="_parent">freedesktop.org</a>
+<a href="http://sourceforge.net"
+target="_parent">sourceforge.net</a>
 </blockquote>
 
 </body>

docs/developers.html

@@ -20,7 +20,7 @@
 Both professional and volunteer developers contribute to Mesa.
 </p>
 <p>
-<a href="https://www.vmware.com/">VMware</a>
+<a href="http://www.vmware.com/">VMware</a>
 employs several of the main Mesa developers including Brian Paul
 and Keith Whitwell.
 </p>
@@ -44,7 +44,7 @@ Intel has recently contributed the new GLSL compiler in Mesa 7.9.
 </p>
 
 <p>
-<a href="https://www.lunarg.com/">LunarG</a> can be contacted
+<a href="http://www.lunarg.com/">LunarG</a> can be contacted
 for custom Mesa / 3D graphics development.
 </p>
 

docs/download.html

@@ -23,37 +23,44 @@ or <a href="https://mesa.freedesktop.org/archive/">mesa.freedesktop.org</a>
 (HTTP).
 </p>
 
-<p>
-Starting with the first release of 2017, Mesa's version scheme is
-year-based. Filenames are in the form <tt>mesa-Y.N.P.tar.gz</tt>, where
-<tt>Y</tt> is the year (two digits), <tt>N</tt> is an incremental number
-(starting at 0) and <tt>P</tt> is the patch number (0 for the first
-release, 1 for the first patch after that).
-</p>
-
 <p>
 When a new release is coming, release candidates (betas) may be found
-in the same directory, and are recognisable by the
-<tt>mesa-Y.N.P-<b>rc</b>X.tar.gz</tt> filename.
+<a href="ftp://ftp.freedesktop.org/pub/mesa/beta/">here</a>.
 </p>
 
 
 <h1>Unpacking</h1>
 
 <p>
-Mesa releases are available in two formats: <tt>.tar.xz</tt> and <tt>.tar.gz</tt>.
+Mesa releases are available in three formats: .tar.bz2, .tar.gz, and .zip
 </p>
 
 <p>
-To unpack the tarball:
+To unpack .tar.gz files:
+</p>
 <pre>
-	tar xf mesa-Y.N.P.tar.xz
+	tar zxf MesaLib-x.y.z.tar.gz
 </pre>
 or
 <pre>
-	tar xf mesa-Y.N.P.tar.gz
+	gzcat MesaLib-x.y.z.tar.gz | tar xf -
 </pre>
+or
+<pre>
+	gunzip MesaLib-x.y.z.tar.gz ; tar xf MesaLib-x.y.z.tar
+</pre>
+<p>
+To unpack .tar.bz2 files:
 </p>
+<pre>
+	bunzip2 -c MesaLib-x.y.z.tar.gz | tar xf -
+</pre>
+<p>
+To unpack .zip files:
+</p>
+<pre>
+	unzip MesaLib-x.y.z.zip
+</pre>
 
 
 <h1>Contents</h1>
@@ -62,8 +69,8 @@ or
 After unpacking you'll have these files and directories (among others):
 </p>
 <pre>
-autogen.sh	- Autoconf script for *nix systems
-scons/		- SCons script for Windows builds
+Makefile	- top-level Makefile for most systems
+configs/	- makefile parameter files for various systems
 include/	- GL header (include) files
 bin/		- shell scripts for making shared libraries, etc
 docs/		- documentation
@@ -102,9 +109,9 @@ In the past, GLUT, GLU and the Mesa demos were released in conjunction with
 Mesa releases.  But since GLUT, GLU and the demos change infrequently, they
 were split off into their own git repositories:
 
-<a href="https://cgit.freedesktop.org/mesa/glut/">GLUT</a>,
-<a href="https://cgit.freedesktop.org/mesa/glu/">GLU</a> and
-<a href="https://cgit.freedesktop.org/mesa/demos/">Demos</a>,
+<a href="http://cgit.freedesktop.org/mesa/glut/">GLUT</a>,
+<a href="http://cgit.freedesktop.org/mesa/glu/">GLU</a> and
+<a href="http://cgit.freedesktop.org/mesa/demos/">Demos</a>,
 </p>
 
 </div>

docs/egl.html

@@ -18,8 +18,8 @@
 
 <p>The current version of EGL in Mesa implements EGL 1.4.  More information
 about EGL can be found at
-<a href="https://www.khronos.org/egl/">
-https://www.khronos.org/egl/</a>.</p>
+<a href="http://www.khronos.org/egl/">
+http://www.khronos.org/egl/</a>.</p>
 
 <p>The Mesa's implementation of EGL uses a driver architecture.  The main
 library (<code>libEGL</code>) is window system neutral.  It provides the EGL
@@ -44,7 +44,7 @@ the driver for your hardware.  For example</p>
 
 <p>The main library and OpenGL is enabled by default.  The first two options
 above enables <a href="opengles.html">OpenGL ES 1.x and 2.x</a>.  The last two
-options enables the listed classic and Gallium drivers respectively.</p>
+options enables the listed classic and and Gallium drivers respectively.</p>
 
 </li>
 
@@ -77,13 +77,15 @@ drivers will be installed to <code>${libdir}/egl</code>.</p>
 
 </dd>
 
-<dt><code>--with-platforms</code></dt>
+<dt><code>--with-egl-platforms</code></dt>
 <dd>
 
 <p>List the platforms (window systems) to support.  Its argument is a comma
-separated string such as <code>--with-platforms=x11,drm</code>.  It decides
+separated string such as <code>--with-egl-platforms=x11,drm</code>.  It decides
 the platforms a driver may support.  The first listed platform is also used by
-the main library to decide the native platform.</p>
+the main library to decide the native platform: the platform the EGL native
+types such as <code>EGLNativeDisplayType</code> or
+<code>EGLNativeWindowType</code> defined for.</p>
 
 <p>The available platforms are <code>x11</code>, <code>drm</code>,
 <code>wayland</code>, <code>surfaceless</code>, <code>android</code>,
@@ -165,9 +167,9 @@ binaries.</p>
 <dd>
 
 <p>This variable specifies the native platform.  The valid values are the same
-as those for <code>--with-platforms</code>.  When the variable is not set,
+as those for <code>--with-egl-platforms</code>.  When the variable is not set,
 the main library uses the first platform listed in
-<code>--with-platforms</code> as the native platform.</p>
+<code>--with-egl-platforms</code> as the native platform.</p>
 
 <p>Extensions like <code>EGL_MESA_drm_display</code> define new functions to
 create displays for non-native platforms.  These extensions are usually used by

docs/envvars.html

@@ -114,20 +114,6 @@ glGetString(GL_VERSION) for OpenGL ES.
 glGetString(GL_SHADING_LANGUAGE_VERSION). Valid values are integers, such as
 "130".  Mesa will not really implement all the features of the given language version
 if it's higher than what's normally reported. (for developers only)
-<li>MESA_GLSL_CACHE_DISABLE - if set, disables the GLSL shader cache
-<li>MESA_GLSL_CACHE_MAX_SIZE - if set, determines the maximum size of
-the on-disk cache of compiled GLSL programs. Should be set to a number
-optionally followed by 'K', 'M', or 'G' to specify a size in
-kilobytes, megabytes, or gigabytes. By default, gigabytes will be
-assumed. And if unset, a maximum size of 1GB will be used. Note: A separate
-cache might be created for each architecture that Mesa is installed for on
-your system. For example under the default settings you may end up with a 1GB
-cache for x86_64 and another 1GB cache for i386.
-<li>MESA_GLSL_CACHE_DIR - if set, determines the directory to be used
-for the on-disk cache of compiled GLSL programs. If this variable is
-not set, then the cache will be stored in $XDG_CACHE_HOME/mesa (if
-that variable is set), or else within .cache/mesa within the user's
-home directory.
 <li>MESA_GLSL - <a href="shading.html#envvars">shading language compiler options</a>
 <li>MESA_NO_MINMAX_CACHE - when set, the minmax index cache is globally disabled.
 </ul>
@@ -160,7 +146,6 @@ See the <a href="xlibdriver.html">Xlib software driver page</a> for details.
    This is useful for debugging hangs, etc.</li>
 <li>INTEL_DEBUG - a comma-separated list of named flags, which do various things:
 <ul>
-   <li>color - use color in output</li>
    <li>tex - emit messages about textures.</li>
    <li>state - emit messages about state flag tracking</li>
    <li>blit - emit messages about blit operations</li>

docs/faq.html

@@ -41,7 +41,7 @@ Last updated: 9 October 2012
 <p>
 Mesa is an open-source implementation of the OpenGL specification.
 OpenGL is a programming library for writing interactive 3D applications.
-See the <a href="https://www.opengl.org/">OpenGL website</a> for more
+See the <a href="http://www.opengl.org/">OpenGL website</a> for more
 information.
 </p>
 <p>
@@ -55,13 +55,13 @@ Yes.  Specifically, Mesa serves as the OpenGL core for the open-source DRI
 drivers for X.org.
 </p>
 <ul>
-  <li>See the <a href="https://dri.freedesktop.org/">DRI website</a>
+  <li>See the <a href="http://dri.freedesktop.org/">DRI website</a>
   for more information.</li>
   <li>See <a href="https://01.org/linuxgraphics">01.org</a>
   for more information about Intel drivers.</li>
-  <li>See <a href="https://nouveau.freedesktop.org">nouveau.freedesktop.org</a>
+  <li>See <a href="http://nouveau.freedesktop.org">nouveau.freedesktop.org</a>
   for more information about Nouveau drivers.</li>
-  <li>See <a href="https://www.x.org/wiki/RadeonFeature">www.x.org/wiki/RadeonFeature</a>
+  <li>See <a href="http://www.x.org/wiki/RadeonFeature">www.x.org/wiki/RadeonFeature</a>
   for more information about Radeon drivers.</li>
 </ul>
 
@@ -144,7 +144,7 @@ Mesa is much more up to date with modern features and extensions.
 </p>
 
 <p>
-<a href="https://sourceforge.net/projects/ogl-es/">Vincent</a> is
+<a href="http://sourceforge.net/projects/ogl-es/">Vincent</a> is
 an open-source implementation of OpenGL ES for mobile devices.
 
 <p>
@@ -157,7 +157,7 @@ is a subset of OpenGL.
 </p>
 
 <p>
-<a href="https://sourceforge.net/projects/softgl/">SoftGL</a>
+<a href="http://sourceforge.net/projects/softgl/">SoftGL</a>
 is an OpenGL subset for mobile devices.
 </p>
 
@@ -213,7 +213,7 @@ If you don't already have GLUT installed, you should grab
 
 <h2>2.4 Where is the GLw library?</h2>
 <p>
-GLw (OpenGL widget library) is now available from a separate <a href="https://cgit.freedesktop.org/mesa/glw/">git repository</a>.  Unless you're using very old Xt/Motif applications with OpenGL, you shouldn't need it.
+GLw (OpenGL widget library) is now available from a separate <a href="http://cgit.freedesktop.org/mesa/glw/">git repository</a>.  Unless you're using very old Xt/Motif applications with OpenGL, you shouldn't need it.
 </p>
 
 
@@ -276,7 +276,7 @@ If you're using a hardware accelerated driver you want <code>direct rendering: Y
 </p>
 <p>
 If your DRI-based driver isn't working, go to the
-<a href="https://dri.freedesktop.org/">DRI website</a> for trouble-shooting information.
+<a href="http://dri.freedesktop.org/">DRI website</a> for trouble-shooting information.
 </p>
 
 
@@ -284,7 +284,7 @@ If your DRI-based driver isn't working, go to the
 <p>
 Make sure the ratio of the far to near clipping planes isn't too great.
 Look
-<a href="https://www.opengl.org/resources/faq/technical/depthbuffer.htm#0040">here</a>
+<a href="http://www.opengl.org/resources/faq/technical/depthbuffer.htm#0040">here</a>
 for details.
 </p>
 <p>
@@ -339,7 +339,7 @@ First, join the <a href="lists.html">mesa-dev mailing list</a>.
 That's where Mesa development is discussed.
 </p>
 <p>
-The <a href="https://www.opengl.org/documentation">
+The <a href="http://www.opengl.org/documentation">
 OpenGL Specification</a> is the bible for OpenGL implementation work.
 You should read it.
 </p>
@@ -383,7 +383,7 @@ implement the extension (specifically the compression/decompression
 algorithms).
 </p>
 <p>
-In the mean time, a 3rd party <a href="https://dri.freedesktop.org/wiki/S3TC">
+In the mean time, a 3rd party <a href="http://dri.freedesktop.org/wiki/S3TC">
 plug-in library</a> is available.
 </p>
 

docs/features.txt

@@ -78,18 +78,18 @@ GL 3.1, GLSL 1.40 --- all DONE: freedreno, i965, nv50, nvc0, r600, radeonsi, llv
   GL_EXT_texture_snorm (Signed normalized textures)     DONE ()
 
 
-GL 3.2, GLSL 1.50 --- all DONE: i965, nv50, nvc0, r600, radeonsi, llvmpipe, softpipe, swr
+GL 3.2, GLSL 1.50 --- all DONE: i965, nv50, nvc0, r600, radeonsi, llvmpipe, softpipe
 
   Core/compatibility profiles                           DONE
   Geometry shaders                                      DONE ()
-  GL_ARB_vertex_array_bgra (BGRA vertex order)          DONE (freedreno)
-  GL_ARB_draw_elements_base_vertex (Base vertex offset) DONE (freedreno)
-  GL_ARB_fragment_coord_conventions (Frag shader coord) DONE (freedreno)
-  GL_ARB_provoking_vertex (Provoking vertex)            DONE (freedreno)
-  GL_ARB_seamless_cube_map (Seamless cubemaps)          DONE (freedreno)
-  GL_ARB_texture_multisample (Multisample textures)     DONE ()
-  GL_ARB_depth_clamp (Frag depth clamp)                 DONE (freedreno)
-  GL_ARB_sync (Fence objects)                           DONE (freedreno)
+  GL_ARB_vertex_array_bgra (BGRA vertex order)          DONE (freedreno, swr)
+  GL_ARB_draw_elements_base_vertex (Base vertex offset) DONE (freedreno, swr)
+  GL_ARB_fragment_coord_conventions (Frag shader coord) DONE (freedreno, swr)
+  GL_ARB_provoking_vertex (Provoking vertex)            DONE (freedreno, swr)
+  GL_ARB_seamless_cube_map (Seamless cubemaps)          DONE (freedreno, swr)
+  GL_ARB_texture_multisample (Multisample textures)     DONE (swr)
+  GL_ARB_depth_clamp (Frag depth clamp)                 DONE (freedreno, swr)
+  GL_ARB_sync (Fence objects)                           DONE (freedreno, swr)
   GLX_ARB_create_context_profile                        DONE
 
 
@@ -107,7 +107,7 @@ GL 3.3, GLSL 3.30 --- all DONE: i965, nv50, nvc0, r600, radeonsi, llvmpipe, soft
   GL_ARB_vertex_type_2_10_10_10_rev                     DONE (freedreno, swr)
 
 
-GL 4.0, GLSL 4.00 --- all DONE: i965/gen7+, nvc0, r600, radeonsi
+GL 4.0, GLSL 4.00 --- all DONE: i965/hsw+, nvc0, r600, radeonsi
 
   GL_ARB_draw_buffers_blend                             DONE (freedreno, i965/gen6+, nv50, llvmpipe, softpipe, swr)
   GL_ARB_draw_indirect                                  DONE (i965/gen7+, llvmpipe, softpipe, swr)
@@ -124,7 +124,7 @@ GL 4.0, GLSL 4.00 --- all DONE: i965/gen7+, nvc0, r600, radeonsi
   - Enhanced per-sample shading                         DONE ()
   - Interpolation functions                             DONE ()
   - New overload resolution rules                       DONE
-  GL_ARB_gpu_shader_fp64                                DONE (i965/gen7+, llvmpipe, softpipe)
+  GL_ARB_gpu_shader_fp64                                DONE (i965/hsw+, llvmpipe, softpipe)
   GL_ARB_sample_shading                                 DONE (i965/gen6+, nv50)
   GL_ARB_shader_subroutine                              DONE (i965/gen6+, nv50, llvmpipe, softpipe, swr)
   GL_ARB_tessellation_shader                            DONE (i965/gen7+)
@@ -132,21 +132,21 @@ GL 4.0, GLSL 4.00 --- all DONE: i965/gen7+, nvc0, r600, radeonsi
   GL_ARB_texture_cube_map_array                         DONE (i965/gen6+, nv50, llvmpipe, softpipe)
   GL_ARB_texture_gather                                 DONE (i965/gen6+, nv50, llvmpipe, softpipe, swr)
   GL_ARB_texture_query_lod                              DONE (i965, nv50, softpipe)
-  GL_ARB_transform_feedback2                            DONE (i965/gen6+, nv50, llvmpipe, softpipe, swr)
+  GL_ARB_transform_feedback2                            DONE (i965/gen7+, nv50, llvmpipe, softpipe, swr)
   GL_ARB_transform_feedback3                            DONE (i965/gen7+, llvmpipe, softpipe, swr)
 
 
-GL 4.1, GLSL 4.10 --- all DONE: i965/gen7+, nvc0, r600, radeonsi
+GL 4.1, GLSL 4.10 --- all DONE: i965/hsw+, nvc0, r600, radeonsi
 
   GL_ARB_ES2_compatibility                              DONE (i965, nv50, llvmpipe, softpipe, swr)
   GL_ARB_get_program_binary                             DONE (0 binary formats)
   GL_ARB_separate_shader_objects                        DONE (all drivers)
-  GL_ARB_shader_precision                               DONE (i965/gen7+, all drivers that support GLSL 4.10)
-  GL_ARB_vertex_attrib_64bit                            DONE (i965/gen7+, llvmpipe, softpipe)
+  GL_ARB_shader_precision                               DONE (i965/hsw+, all drivers that support GLSL 4.10)
+  GL_ARB_vertex_attrib_64bit                            DONE (i965/hsw+, llvmpipe, softpipe)
   GL_ARB_viewport_array                                 DONE (i965, nv50, llvmpipe, softpipe)
 
 
-GL 4.2, GLSL 4.20 -- all DONE: i965/gen7+, nvc0, radeonsi
+GL 4.2, GLSL 4.20 -- all DONE: i965/hsw+, nvc0, radeonsi
 
   GL_ARB_texture_compression_bptc                       DONE (i965, r600)
   GL_ARB_compressed_texture_pixel_storage               DONE (all drivers)
@@ -191,8 +191,8 @@ GL 4.3, GLSL 4.30 -- all DONE: i965/gen8+, nvc0, radeonsi
 GL 4.4, GLSL 4.40 -- all DONE: i965/gen8+, nvc0, radeonsi
 
   GL_MAX_VERTEX_ATTRIB_STRIDE                           DONE (all drivers)
-  GL_ARB_buffer_storage                                 DONE (i965, nv50, r600, llvmpipe, swr)
-  GL_ARB_clear_texture                                  DONE (i965, nv50, r600, llvmpipe, softpipe, swr)
+  GL_ARB_buffer_storage                                 DONE (i965, nv50, r600)
+  GL_ARB_clear_texture                                  DONE (i965, nv50, r600)
   GL_ARB_enhanced_layouts                               DONE (i965, nv50, llvmpipe, softpipe)
   - compile-time constant expressions                   DONE
   - explicit byte offsets for blocks                    DONE
@@ -283,7 +283,7 @@ Khronos, ARB, and OES extensions that are not part of any OpenGL or OpenGL ES ve
   GL_ARB_ES3_2_compatibility                            DONE (i965/gen8+)
   GL_ARB_fragment_shader_interlock                      not started
   GL_ARB_gl_spirv                                       not started
-  GL_ARB_gpu_shader_int64                               DONE (i965/gen8+, nvc0, radeonsi, softpipe, llvmpipe)
+  GL_ARB_gpu_shader_int64                               started (airlied for core and Gallium, idr for i965)
   GL_ARB_indirect_parameters                            DONE (nvc0, radeonsi)
   GL_ARB_parallel_shader_compile                        not started, but Chia-I Wu did some related work in 2014
   GL_ARB_pipeline_statistics_query                      DONE (i965, nvc0, radeonsi, softpipe, swr)
@@ -291,19 +291,19 @@ Khronos, ARB, and OES extensions that are not part of any OpenGL or OpenGL ES ve
   GL_ARB_robustness_isolation                           not started
   GL_ARB_sample_locations                               not started
   GL_ARB_seamless_cubemap_per_texture                   DONE (i965, nvc0, radeonsi, r600, softpipe, swr)
-  GL_ARB_shader_atomic_counter_ops                      DONE (i965/gen7+, nvc0, radeonsi, softpipe)
-  GL_ARB_shader_ballot                                  DONE (nvc0, radeonsi)
-  GL_ARB_shader_clock                                   DONE (i965/gen7+, nv50, nvc0, radeonsi)
+  GL_ARB_shader_atomic_counter_ops                      DONE (nvc0, radeonsi, softpipe)
+  GL_ARB_shader_ballot                                  not started
+  GL_ARB_shader_clock                                   DONE (i965/gen7+)
   GL_ARB_shader_draw_parameters                         DONE (i965, nvc0, radeonsi)
-  GL_ARB_shader_group_vote                              DONE (nvc0, radeonsi)
+  GL_ARB_shader_group_vote                              DONE (nvc0)
   GL_ARB_shader_stencil_export                          DONE (i965/gen9+, radeonsi, softpipe, llvmpipe, swr)
-  GL_ARB_shader_viewport_layer_array                    DONE (i965/gen6+, radeonsi)
-  GL_ARB_sparse_buffer                                  DONE (radeonsi/CIK+)
+  GL_ARB_shader_viewport_layer_array                    DONE (i965/gen6+)
+  GL_ARB_sparse_buffer                                  not started
   GL_ARB_sparse_texture                                 not started
   GL_ARB_sparse_texture2                                not started
   GL_ARB_sparse_texture_clamp                           not started
   GL_ARB_texture_filter_minmax                          not started
-  GL_ARB_transform_feedback_overflow_query              DONE (i965/gen6+)
+  GL_ARB_transform_feedback_overflow_query              not started
   GL_KHR_blend_equation_advanced_coherent               DONE (i965/gen9+)
   GL_KHR_no_error                                       not started
   GL_KHR_texture_compression_astc_hdr                   DONE (core only)
@@ -333,6 +333,5 @@ we DO NOT WANT implementations of these extensions for Mesa.
   GL_ARB_shadow_ambient                                 Superseded by GL_ARB_fragment_program
   GL_ARB_vertex_blend                                   Superseded by GL_ARB_vertex_program
 
-
-A graphical representation of this information can be found at
-https://mesamatrix.net/
+More info about these features and the work involved can be found at
+http://dri.freedesktop.org/wiki/MissingFunctionality

docs/helpwanted.html

@@ -24,7 +24,7 @@ Here are some specific ideas and areas where help would be appreciated:
 <ol>
 <li>
 <b>Driver patching and testing.</b>
-Patches are often posted to the <a href="https://lists.freedesktop.org/mailman/listinfo/mesa-dev">mesa-dev mailing list</a>, but aren't
+Patches are often posted to the <a href="http://lists.freedesktop.org/mailman/listinfo/mesa-dev">mesa-dev mailing list</a>, but aren't
 immediately checked into git because not enough people are testing them.
 Just applying patches, testing and reporting back is helpful.
 <li>
@@ -39,7 +39,7 @@ issues in the code.
 Fixing MSVC builds.
 <li>
 <b>Contribute more tests to
-<a href="https://piglit.freedesktop.org/">Piglit</a>.</b>
+<a href="http://piglit.freedesktop.org/">Piglit</a>.</b>
 <li>
 <b>Automatic testing.
 </b>
@@ -56,9 +56,9 @@ You can find some further To-do lists here:
 <b>Common To-Do lists:</b>
 </p>
 <ul>
-  <li><a href="https://cgit.freedesktop.org/mesa/mesa/tree/docs/features.txt">
+  <li><a href="http://cgit.freedesktop.org/mesa/mesa/tree/docs/features.txt">
     <b>features.txt</b></a> - Status of OpenGL 3.x / 4.x features in Mesa.</li>
-  <li><a href="https://dri.freedesktop.org/wiki/MissingFunctionality">
+  <li><a href="http://dri.freedesktop.org/wiki/MissingFunctionality">
     <b>MissingFunctionality</b></a> - Detailed information about missing OpenGL features.</li>
 </ul>
 
@@ -66,15 +66,15 @@ You can find some further To-do lists here:
 <b>Driver specific To-Do lists:</b>
 </p>
 <ul>
-  <li><a href="https://cgit.freedesktop.org/mesa/mesa/tree/src/gallium/docs/llvm-todo.txt">
+  <li><a href="http://cgit.freedesktop.org/mesa/mesa/tree/src/gallium/docs/llvm-todo.txt">
     <b>LLVMpipe</b></a> - Software driver using LLVM for runtime code generation.</li>
-  <li><a href="https://dri.freedesktop.org/wiki/RadeonsiToDo">
+  <li><a href="http://dri.freedesktop.org/wiki/RadeonsiToDo">
     <b>radeonsi</b></a> - Driver for AMD Southern Island.</li>
-  <li><a href="https://dri.freedesktop.org/wiki/R600ToDo">
+  <li><a href="http://dri.freedesktop.org/wiki/R600ToDo">
     <b>r600g</b></a> - Driver for ATI/AMD R600 - Northern Island.</li>
-  <li><a href="https://dri.freedesktop.org/wiki/R300ToDo">
+  <li><a href="http://dri.freedesktop.org/wiki/R300ToDo">
     <b>r300g</b></a> - Driver for ATI R300 - R500.</li>
-  <li><a href="https://cgit.freedesktop.org/mesa/mesa/tree/src/gallium/drivers/i915/TODO">
+  <li><a href="http://cgit.freedesktop.org/mesa/mesa/tree/src/gallium/drivers/i915/TODO">
     <b>i915g</b></a> - Driver for Intel i915/i945.</li>
 </ul>
 

docs/index.html

@@ -16,60 +16,6 @@
 
 <h1>News</h1>
 
-<h2>April 1, 2017</h2>
-<p>
-<a href="relnotes/17.0.3.html">Mesa 17.0.3</a> is released.
-This is a bug-fix release.
-</p>
-
-<h2>March 20, 2017</h2>
-<p>
-<a href="relnotes/13.0.6.html">Mesa 13.0.6</a> and
-<a href="relnotes/17.0.2.html">Mesa 17.0.2</a> are released.
-
-These are bug-fix releases from the 13.0 and 17.0 branches, respectively.
-<br>
-NOTE: It is anticipated that 13.0.6 will be the final release in the 13.0
-series. Users of 13.0 are encouraged to migrate to the 17.0 series in order
-to obtain future fixes.
-</p>
-
-<h2>March 4, 2017</h2>
-<p>
-<a href="relnotes/17.0.1.html">Mesa 17.0.1</a> is released.
-This is a bug-fix release.
-</p>
-
-<h2>February 20, 2017</h2>
-<p>
-<a href="relnotes/13.0.5.html">Mesa 13.0.5</a> is released.
-This is a bug-fix release.
-</p>
-
-<h2>February 13, 2017</h2>
-<p>
-<a href="relnotes/17.0.0.html">Mesa 17.0.0</a> is released.  This is a
-new development release.  See the release notes for more information
-about the release.
-</p>
-
-<h2>February 1, 2017</h2>
-<p>
-<a href="relnotes/13.0.4.html">Mesa 13.0.4</a> is released.
-This is a bug-fix release.
-</p>
-
-<h2>January 23, 2017</h2>
-<p>
-<a href="relnotes/12.0.6.html">Mesa 12.0.6</a> is released.
-This is a bug-fix release.
-<br>
-NOTE: This is an extra release for the 12.0 stable branch, as per developers'
-feedback. It is anticipated that 12.0.6 will be the final release in the 12.0
-series. Users of 12.0 are encouraged to migrate to the 13.0 series in order
-to obtain future fixes.
-</p>
-
 <h2>January 5, 2017</h2>
 <p>
 <a href="relnotes/13.0.3.html">Mesa 13.0.3</a> is released.
@@ -205,7 +151,7 @@ This is a bug-fix release.
 </p>
 <p>
 Mesa demos 8.3.0 is also released.
-See the <a href="https://lists.freedesktop.org/archives/mesa-announce/2015-December/000191.html">announcement</a> for more information about the release.
+See the <a href="http://lists.freedesktop.org/archives/mesa-announce/2015-December/000191.html">announcement</a> for more information about the release.
 You can download it from <a href="ftp://ftp.freedesktop.org/pub/mesa/demos/8.3.0/">ftp.freedesktop.org/pub/mesa/demos/8.3.0/</a>.
 </p>
 
@@ -520,7 +466,7 @@ This is a bug-fix release.
 
 <p>
 Mesa demos 8.2.0 is released.
-See the <a href="https://lists.freedesktop.org/archives/mesa-announce/2014-July/000100.html">announcement</a> for more information about the release.
+See the <a href="http://lists.freedesktop.org/archives/mesa-announce/2014-July/000100.html">announcement</a> for more information about the release.
 You can download it from <a href="ftp://ftp.freedesktop.org/pub/mesa/demos/8.2.0/">ftp.freedesktop.org/pub/mesa/demos/8.2.0/</a>.
 </p>
 
@@ -699,7 +645,7 @@ This is a bug fix release.
 
 <p>
 Mesa demos 8.1.0 is released.
-See the <a href="https://lists.freedesktop.org/archives/mesa-dev/2013-February/035180.html">announcement</a> for more information about the release.
+See the <a href="http://lists.freedesktop.org/archives/mesa-dev/2013-February/035180.html">announcement</a> for more information about the release.
 You can download it from <a href="ftp://ftp.freedesktop.org/pub/mesa/demos/8.1.0/">ftp.freedesktop.org/pub/mesa/demos/8.1.0/</a>.
 </p>
 
@@ -1395,7 +1341,7 @@ and primarily just incorporates bug fixes.
 <h2>December 28, 2003</h2>
 
 <p>
-The Mesa CVS server has been moved to <a href="https://www.freedesktop.org">
+The Mesa CVS server has been moved to <a href="http://www.freedesktop.org">
 freedesktop.org</a> because of problems with SourceForge's anonymous
 CVS service.
 </p>
@@ -1967,7 +1913,7 @@ Here's what's new:</p>
 </pre>
 
 <h2>March 23, 2000</h2>
-<p>I've just upload the Mesa 3.2 beta 1 files to SourceForge at <a href="https://sourceforge.net/project/showfiles.php?group_id=3">https://sourceforge.net/project/filelist.php?group_id=3</a></p>
+<p>I've just upload the Mesa 3.2 beta 1 files to SourceForge at <a href="http://sourceforge.net/project/showfiles.php?group_id=3">http://sourceforge.net/project/filelist.php?group_id=3</a></p>
 <p>3.2 (note even number) is a stabilization release of Mesa 3.1 meaning it's mainly
 just bug fixes.</p>
 <p>Here's what's changed:</p>
@@ -2015,7 +1961,7 @@ After 3.2 is wrapped up I hope to release 3.3 beta 1 soon afterward.</p>
 
 <h2>December 17, 1999</h2>
 <p>A Slashdot interview with Brian about Mesa (questions submitted by Slashdot readers)
-can be found at <a href="https://slashdot.org/interviews/99/12/17/0927212.shtml">https://slashdot.org/interviews/99/12/17/0927212.shtml</a>.</p>
+can be found at <a href="http://slashdot.org/interviews/99/12/17/0927212.shtml">http://slashdot.org/interviews/99/12/17/0927212.shtml</a>.</p>
 
 <h2>December 14, 1999</h2>
 <p>Mesa 3.1 is released!</p>
@@ -2049,7 +1995,7 @@ BOF meeting is now available.</p>
 <p>-Brian</p>
 
 <h2>August 14, 1999</h2>
-<p><a href="https://www.mesa3d.org">www.mesa3d.org</a> is having
+<p><a href="http://www.mesa3d.org">www.mesa3d.org</a> is having
 technical problems due to hardware failures at VA Linux systems. The Mac pages,
 ftp, and CVS services aren't fully restored yet. Please be patient.</p>
 <p>-Brian</p>
@@ -2058,9 +2004,9 @@ ftp, and CVS services aren't fully restored yet. Please be patient.</p>
 <p>RPMS of the nVidia RIVA server can be found at <code>ftp://ftp.mesa3d.org/mesa/misc/nVidia/</code>.</p>
 
 <h2>June 2, 1999</h2>
-<p><a href="https://www.nvidia.com/">nVidia</a> has released some Linux binaries for
+<p><a href="http://www.nvidia.com/">nVidia</a> has released some Linux binaries for
 xfree86 3.3.3.1, along with the <b>full source</b>, which includes GLX acceleration
-based on Mesa 3.0. They can be downloaded from <code>https://www.nvidia.com/Products.nsf/htmlmedia/software_drivers.html</code>.</p>
+based on Mesa 3.0. They can be downloaded from <code>http://www.nvidia.com/Products.nsf/htmlmedia/software_drivers.html</code>.</p>
 
 <h2>May 24, 1999</h2>
 <p>Beta 2 of Mesa 3.1 has been make available at <code>ftp://ftp.mesa3d.org/mesa/beta/</code>.
@@ -2108,11 +2054,11 @@ grateful.
 <p>The new webpages are now online. Enjoy, and let me know if you find any errors.
 
 <h2>February 16, 1999</h2>
-<p><a href="https://www.sgi.com/">SGI</a> releases its
-<a href="https://www.sgi.com/software/opensource/glx/">GLX source code</a>.</p>
+<p><a href="http://www.sgi.com/">SGI</a> releases its
+<a href="http://www.sgi.com/software/opensource/glx/">GLX source code</a>.</p>
 
 <h2>January 22, 1999</h2>
-<p><a href="https://www.mesa3d.org">www.mesa3d.org</a> established</p>
+<p><a href="http://www.mesa3d.org">www.mesa3d.org</a> established</p>
 
 </div>
 </body>

docs/install.html

@@ -71,7 +71,7 @@ you think you've spotted a bug let developers know by filing a
 
 
 <ul>
-<li><a href="https://www.python.org/">Python</a> - Python is required.
+<li><a href="http://www.python.org/">Python</a> - Python is required.
 Version 2.6.4 or later should work.
 </li>
 <li><a href="http://www.makotemplates.org/">Python Mako module</a> -
@@ -178,7 +178,7 @@ your experience might vary.
 
 <p>
 In order to achieve that one should update their local manifest to point to the
-upstream repo, set the appropriate BOARD_GPU_DRIVERS and build the
+upstream repo, set the approapriate BOARD_GPU_DRIVERS and build the
 libGLES_mesa library.
 </p>
 

docs/intro.html

@@ -17,34 +17,22 @@
 <h1>Introduction</h1>
 
 <p>
-The Mesa project began as an open-source implementation of the
-<a href="https://www.opengl.org/">OpenGL</a> specification -
+Mesa is an open-source implementation of the
+<a href="http://www.opengl.org/">OpenGL</a> specification -
 a system for rendering interactive 3D graphics.
 </p>
 
 <p>
-Over the years the project has grown to implement more graphics APIs,
-including
-<a href="https://www.khronos.org/opengles/">OpenGL ES</a> (versions 1, 2, 3),
-<a href="https://www.khronos.org/opencl/">OpenCL</a>,
-<a href="https://www.khronos.org/openmax/">OpenMAX</a>,
-<a href="https://en.wikipedia.org/wiki/VDPAU">VDPAU</a>,
-<a href="https://en.wikipedia.org/wiki/Video_Acceleration_API">VA API</a>,
-<a href="https://en.wikipedia.org/wiki/X-Video_Motion_Compensation">XvMC</a> and
-<a href="https://www.khronos.org/vulkan/">Vulkan</a>.
+A variety of device drivers allows Mesa to be used in many different
+environments ranging from software emulation to complete hardware acceleration
+for modern GPUs.
 </p>
 
 <p>
-A variety of device drivers allows the Mesa libraries to be used in many
-different environments ranging from software emulation to complete hardware
-acceleration for modern GPUs.
-</p>
-
-<p>
-Mesa ties into several other open-source projects: the
-<a href="https://dri.freedesktop.org/">Direct Rendering
-Infrastructure</a> and <a href="https://x.org">X.org</a> to
-provide OpenGL support on Linux, FreeBSD and other operating
+Mesa ties into several other open-source projects: the 
+<a href="http://dri.freedesktop.org/">Direct Rendering 
+Infrastructure</a> and <a href="http://x.org">X.org</a> to 
+provide OpenGL support to users of X on Linux, FreeBSD and other operating 
 systems.
 </p>
 
@@ -97,7 +85,7 @@ the OpenGL API, so they didn't feel threatened by the project.
 1995-1996: I continue working on Mesa both during my spare time and during
 my work hours at the Space Science and Engineering Center at the University
 of Wisconsin in Madison.  My supervisor, Bill Hibbard, lets me do this because
-Mesa is now being using for the <a href="https://www.ssec.wisc.edu/%7Ebillh/vis.html">Vis5D</a> project.
+Mesa is now being using for the <a href="http://www.ssec.wisc.edu/%7Ebillh/vis.html">Vis5D</a> project.
 </p><p>
 October 1996: Mesa 2.0 is released.  It implements the OpenGL 1.1 specification.
 </p>
@@ -154,7 +142,7 @@ and OpenGL Shading Language.
 
 <p>
 2008: Keith Whitwell and other Tungsten Graphics employees develop
-<a href="https://en.wikipedia.org/wiki/Gallium3D">Gallium</a>
+<a href="http://en.wikipedia.org/wiki/Gallium3D">Gallium</a>
 - a new GPU abstraction layer.  The latest Mesa drivers are based on
 Gallium and other APIs such as OpenVG are implemented on top of Gallium.
 </p>
@@ -165,22 +153,13 @@ and version 1.30 of the OpenGL Shading Language.
 </p>
 
 <p>
-July 2016: Mesa 12.0 is released, including OpenGL 4.3 support and initial
-support for Vulkan for Intel GPUs.  Plus, there's another gallium software
-driver ("swr") based on LLVM and developed by Intel.
-</p>
-
-<p>
-Ongoing: Mesa is the OpenGL implementation for devices designed by
-Intel, AMD, NVIDIA, Qualcomm, Broadcom, Vivante, plus the VMware and
-VirGL virtual GPUs.
+Ongoing: Mesa is the OpenGL implementation for several types of hardware
+made by Intel, AMD and NVIDIA, plus the VMware virtual GPU.
 There's also several software-based renderers: swrast (the legacy
-Mesa rasterizer), softpipe (a gallium reference driver), llvmpipe
-(LLVM/JIT-based high-speed rasterizer) and swr (another LLVM-based driver).
-</p>
-<p>
+Mesa rasterizer), softpipe (a gallium reference driver) and llvmpipe
+(LLVM/JIT-based high-speed rasterizer).
 Work continues on the drivers and core Mesa to implement newer versions
-of the OpenGL, OpenGL ES and Vulkan specifications.
+of the OpenGL specification.
 </p>
 
 
@@ -199,9 +178,6 @@ of the OpenGL specification is implemented.
 Version 12.x of Mesa implements the OpenGL 4.3 API, but not all drivers
 support OpenGL 4.3.
 </p>
-<p>
-Initial support for Vulkan is also included.
-</p>
 
 
 <h2>Version 11.x features</h2>
@@ -283,7 +259,7 @@ GL_SRC2_ALPHA               GL_SOURCE2_ALPHA
 </pre>
 <p>
 See the
-<a href="https://www.opengl.org/documentation/spec.html">
+<a href="http://www.opengl.org/documentation/spec.html">
 OpenGL specification</a> for more details.
 </p>
 

docs/license.html

@@ -18,10 +18,10 @@
 
 <p>
 Mesa is a 3-D graphics library with an API which is very similar to
-that of <a href="https://www.opengl.org/">OpenGL</a>.*
+that of <a href="http://www.opengl.org/">OpenGL</a>.*
 To the extent that Mesa utilizes the OpenGL command syntax or state
 machine, it is being used with authorization from <a
-href="https://www.sgi.com/">Silicon Graphics,
+href="http://www.sgi.com/">Silicon Graphics,
 Inc.</a>(SGI). However, the author does not possess an OpenGL license
 from SGI, and makes no claim that Mesa is in any way a compatible
 replacement for OpenGL or associated with SGI. Those who want a
@@ -36,7 +36,7 @@ library</em>. <br>
 </p>
 
 <p>
-* OpenGL is a trademark of <a href="https://www.sgi.com/"
+* OpenGL is a trademark of <a href="http://www.sgi.com/"
 >Silicon Graphics Incorporated</a>.
 </p>
 

docs/lists.html

@@ -21,23 +21,23 @@
 </p>
 
 <ul>
-<li><p><a href="https://lists.freedesktop.org/mailman/listinfo/mesa-users">mesa-users</a>
+<li><p><a href="http://lists.freedesktop.org/mailman/listinfo/mesa-users">mesa-users</a>
 - intended for end-users of Mesa and DRI drivers. Newbie questions are OK,
 but please try the general OpenGL resources and Mesa/DRI documentation first.</p>
 </li>
-<li><p><a href="https://lists.freedesktop.org/mailman/listinfo/mesa-dev">mesa-dev</a>
+<li><p><a href="http://lists.freedesktop.org/mailman/listinfo/mesa-dev">mesa-dev</a>
 - for Mesa, Gallium and DRI development
 discussion.  Not for beginners.</p>
 </li>
-<li><p><a href="https://lists.freedesktop.org/mailman/listinfo/mesa-commit">mesa-commit</a>
+<li><p><a href="http://lists.freedesktop.org/mailman/listinfo/mesa-commit">mesa-commit</a>
 - relays git check-in messages (for developers).
 In general, people should not post to this list.</p>
 </li>
-<li><p><a href="https://lists.freedesktop.org/mailman/listinfo/mesa-announce">mesa-announce</a>
+<li><p><a href="http://lists.freedesktop.org/mailman/listinfo/mesa-announce">mesa-announce</a>
 - announcements of new Mesa
 versions are sent to this list.  Very low traffic.</p>
 </li>
-<li><p><a href="https://lists.freedesktop.org/mailman/listinfo/piglit">piglit</a>
+<li><p><a href="http://lists.freedesktop.org/mailman/listinfo/piglit">piglit</a>
 - for Piglit (OpenGL driver testing framework) discussion.</p>
 </li>
 </ul>
@@ -56,22 +56,22 @@ Follow the links above for list archives.
 <p>
 The old Mesa lists hosted at SourceForge are no longer in use.
 The archives are still available, however:
-<a href="https://sourceforge.net/mailarchive/forum.php?forum_name=mesa3d-announce">mesa3d-announce</a>,
-<a href="https://sourceforge.net/mailarchive/forum.php?forum_name=mesa3d-users">mesa3d-users</a>,
-<a href="https://sourceforge.net/mailarchive/forum.php?forum_name=mesa3d-dev">mesa3d-dev</a>.
+<a href="http://sourceforge.net/mailarchive/forum.php?forum_name=mesa3d-announce">mesa3d-announce</a>,
+<a href="http://sourceforge.net/mailarchive/forum.php?forum_name=mesa3d-users">mesa3d-users</a>,
+<a href="http://sourceforge.net/mailarchive/forum.php?forum_name=mesa3d-dev">mesa3d-dev</a>.
 </p>
 
 
 <p>For mailing lists about Direct Rendering Modules (drm) in Linux/BSD 
 kernels, see the
-<a href="https://dri.freedesktop.org/wiki/MailingLists">DRI wiki</a>.
+<a href="http://dri.freedesktop.org/wiki/MailingLists">DRI wiki</a>.
 </p>
 
 
 <h1>IRC</h1>
 
 <p>join <a href="irc://chat.freenode.net#dri-devel">#dri-devel channel</a>
-on <a href="https://webchat.freenode.net/">irc.freenode.net</a>
+on <a href="http://webchat.freenode.net/">irc.freenode.net</a>
 </p>
 
 
@@ -82,7 +82,7 @@ Here are some other OpenGL-related forums you might find useful:
 </p>
 
 <ul>
-<li><a href="https://www.opengl.org/discussion_boards/">OpenGL discussion forums</a>
+<li><a href="http://www.opengl.org/cgi-bin/ubb/ultimatebb.cgi">OpenGL discussion forums</a>
 at www.opengl.org</li>
 <li>Usenet newsgroups:
 <ul>

docs/llvmpipe.html

@@ -34,7 +34,7 @@ It's the fastest software rasterizer for Mesa.
 <li>
    <p>An x86 or amd64 processor; 64-bit mode recommended.</p>
    <p>
-   Support for SSE2 is strongly encouraged.  Support for SSE3 and SSE4.1 will
+   Support for SSE2 is strongly encouraged.  Support for SSSE3 and SSE4.1 will
    yield the most efficient code.  The fewer features the CPU has the more
    likely is that you run into underperforming, buggy, or incomplete code.
    </p>
@@ -165,8 +165,8 @@ any OpenGL drivers):
   <li><p>load this registry settings:</p>
   <pre>REGEDIT4
 
-; https://technet.microsoft.com/en-us/library/cc749368.aspx
-; https://www.msfn.org/board/topic/143241-portable-windows-7-build-from-winpe-30/page-5#entry942596
+; http://technet.microsoft.com/en-us/library/cc749368.aspx
+; http://www.msfn.org/board/topic/143241-portable-windows-7-build-from-winpe-30/page-5#entry942596
 [HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows NT\CurrentVersion\OpenGLDrivers\MSOGL]
 "DLL"="mesadrv.dll"
 "DriverVersion"=dword:00000001
@@ -195,7 +195,7 @@ that no tail call optimizations are done by gcc.
 <h2>Linux perf integration</h2>
 
 <p>
-On Linux, it is possible to have symbol resolution of JIT code with <a href="https://perf.wiki.kernel.org/">Linux perf</a>:
+On Linux, it is possible to have symbol resolution of JIT code with <a href="http://perf.wiki.kernel.org/">Linux perf</a>:
 </p>
 
 <pre>
@@ -206,12 +206,12 @@ On Linux, it is possible to have symbol resolution of JIT code with <a href="htt
 <p>
 When run inside Linux perf, llvmpipe will create a /tmp/perf-XXXXX.map file with
 symbol address table.  It also dumps assembly code to /tmp/perf-XXXXX.map.asm,
-which can be used by the bin/perf-annotate-jit.py script to produce disassembly of
+which can be used by the bin/perf-annotate-jit script to produce disassembly of
 the generated code annotated with the samples.
 </p>
 
 <p>You can obtain a call graph via
-<a href="https://github.com/jrfonseca/gprof2dot#linux-perf">Gprof2Dot</a>.</p>
+<a href="http://code.google.com/p/jrfonseca/wiki/Gprof2Dot#linux_perf">Gprof2Dot</a>.</p>
 
 
 <h1>Unit testing</h1>
@@ -253,7 +253,7 @@ for posterior analysis, e.g.:
   We use LLVM-C bindings for now. They are not documented, but follow the C++
   interfaces very closely, and appear to be complete enough for code
   generation. See 
-  <a href="https://npcontemplation.blogspot.com/2008/06/secret-of-llvm-c-bindings.html">
+  <a href="http://npcontemplation.blogspot.com/2008/06/secret-of-llvm-c-bindings.html">
   this stand-alone example</a>.  See the llvm-c/Core.h file for reference.
 </li>
 </ul>
@@ -264,18 +264,18 @@ for posterior analysis, e.g.:
   <li>
     <p>Rasterization</p>
     <ul>
-      <li><a href="https://www.cs.unc.edu/~olano/papers/2dh-tri/">Triangle Scan Conversion using 2D Homogeneous Coordinates</a></li>
+      <li><a href="http://www.cs.unc.edu/~olano/papers/2dh-tri/">Triangle Scan Conversion using 2D Homogeneous Coordinates</a></li>
       <li><a href="http://www.drdobbs.com/parallel/rasterization-on-larrabee/217200602">Rasterization on Larrabee</a> (<a href="http://devmaster.net/posts/2887/rasterization-on-larrabee">DevMaster copy</a>)</li>
       <li><a href="http://devmaster.net/posts/6133/rasterization-using-half-space-functions">Rasterization using half-space functions</a></li>
       <li><a href="http://devmaster.net/posts/6145/advanced-rasterization">Advanced Rasterization</a></li>
-      <li><a href="https://fgiesen.wordpress.com/2013/02/17/optimizing-sw-occlusion-culling-index/">Optimizing Software Occlusion Culling</a></li>
+      <li><a href="http://fgiesen.wordpress.com/2013/02/17/optimizing-sw-occlusion-culling-index/">Optimizing Software Occlusion Culling</a></li>
     </ul>
   </li>
   <li>
     <p>Texture sampling</p>
     <ul>
       <li><a href="http://chrishecker.com/Miscellaneous_Technical_Articles#Perspective_Texture_Mapping">Perspective Texture Mapping</a></li>
-      <li><a href="https://www.flipcode.com/archives/Texturing_As_In_Unreal.shtml">Texturing As In Unreal</a></li>
+      <li><a href="http://www.flipcode.com/archives/Texturing_As_In_Unreal.shtml">Texturing As In Unreal</a></li>
       <li><a href="http://www.gamasutra.com/view/feature/3301/runtime_mipmap_filtering.php">Run-Time MIP-Map Filtering</a></li>
       <li><a href="http://alt.3dcenter.org/artikel/2003/10-26_a_english.php">Will "brilinear" filtering persist?</a></li>
       <li><a href="http://ixbtlabs.com/articles2/gffx/nv40-rx800-3.html">Trilinear filtering</a></li>
@@ -294,21 +294,21 @@ for posterior analysis, e.g.:
       <li><a href="http://www.drdobbs.com/optimizing-pixomatic-for-modern-x86-proc/184405807">Optimizing Pixomatic For Modern x86 Processors</a></li>
       <li><a href="http://www.intel.com/content/www/us/en/architecture-and-technology/64-ia-32-architectures-optimization-manual.html">Intel 64 and IA-32 Architectures Optimization Reference Manual</a></li>
       <li><a href="http://www.agner.org/optimize/">Software optimization resources</a></li>
-      <li><a href="https://software.intel.com/en-us/articles/intel-intrinsics-guide">Intel Intrinsics Guide</a><li>
+      <li><a href="http://software.intel.com/en-us/articles/intel-intrinsics-guide">Intel Intrinsics Guide</a><li>
     </ul>
   </li>
   <li>
     <p>LLVM</p>
     <ul>
       <li><a href="http://llvm.org/docs/LangRef.html">LLVM Language Reference Manual</a></li>
-      <li><a href="https://npcontemplation.blogspot.co.uk/2008/06/secret-of-llvm-c-bindings.html">The secret of LLVM C bindings</a></li>
+      <li><a href="http://npcontemplation.blogspot.co.uk/2008/06/secret-of-llvm-c-bindings.html">The secret of LLVM C bindings</a></li>
     </ul>
   </li>
   <li>
     <p>General</p>
     <ul>
-      <li><a href="https://fgiesen.wordpress.com/2011/07/09/a-trip-through-the-graphics-pipeline-2011-index/">A trip through the Graphics Pipeline</a></li>
-      <li><a href="https://msdn.microsoft.com/en-us/library/gg615082.aspx#architecture">WARP Architecture and Performance</a></li>
+      <li><a href="http://fgiesen.wordpress.com/2011/07/09/a-trip-through-the-graphics-pipeline-2011-index/">A trip through the Graphics Pipeline</a></li>
+      <li><a href="http://msdn.microsoft.com/en-us/library/gg615082.aspx#architecture">WARP Architecture and Performance</a></li>
     </ul>
   </li>
 </ul>

docs/opengles.html

@@ -17,8 +17,8 @@
 <h1>OpenGL ES</h1>
 
 <p>Mesa implements OpenGL ES 1.1 and OpenGL ES 2.0.  More information about
-OpenGL ES can be found at <a href="https://www.khronos.org/opengles/">
-https://www.khronos.org/opengles/</a>.</p>
+OpenGL ES can be found at <a href="http://www.khronos.org/opengles/">
+http://www.khronos.org/opengles/</a>.</p>
 
 <p>OpenGL ES depends on a working EGL implementation.  Please refer to
 <a href="egl.html">Mesa EGL</a> for more information about EGL.</p>

docs/patents.txt

@@ -27,5 +27,5 @@ ARB_texture_float:
     enable this extension.
 
 
-[1] https://www.google.com/patents/about?id=mIIOAAAAEBAJ&dq=6650327
-[2] https://www.opengl.org/registry/specs/ARB/texture_float.txt
+[1] http://www.google.com/patents/about?id=mIIOAAAAEBAJ&dq=6650327
+[2] http://www.opengl.org/registry/specs/ARB/texture_float.txt

docs/postprocess.html

@@ -45,7 +45,7 @@ Multiple filters can be used together.
 <li>pp_nored, pp_nogreen, pp_noblue - set to 1 to remove the corresponding color channel.
 These are basic filters for easy testing of the PP queue.
 <li>pp_jimenezmlaa, pp_jimenezmlaa_color -
-<a href="https://www.iryokufx.com/mlaa/" target=_blank>Jimenez's MLAA</a>
+<a href="http://www.iryokufx.com/mlaa/" target=_blank>Jimenez's MLAA</a>
 is a morphological antialiasing filter.
 The two versions use depth and color data, respectively.
 Which works better depends on the app - depth will not blur text, but it will

docs/precompiled.html

@@ -20,14 +20,8 @@
 In general, precompiled Mesa libraries are not available.
 </p>
 <p>
-Some Linux distributions closely follow the latest Mesa releases. On others one
-has to use unofficial channels.
-<br>
-There are some general directions:
-<li>Debian/Ubuntu based distros - PPA: xorg-edgers, oibaf and padoka</li>
-<li>Fedora - Corp: erp and che</li>
-<li>OpenSuse/SLES - OBS: X11:XOrg and pontostroy:X11</li>
-<li>Gentoo/Archlinux - officially provided/supported</li>
+However, some Linux distros (such as Ubuntu) seem to closely track
+Mesa and often have the latest Mesa release available as an update.
 </p>
 
 </div>

docs/releasing.html

@@ -57,11 +57,11 @@ to a minimum.
 
 <h2>Feature releases</h2>
 <ul>
-<li>Available approximately every three months.
+<li>Available approximatelly every three months.
 <li>Initial timeplan available 2-4 weeks before the planned branchpoint (rc1)
 on the mesa-announce@ mailing list.
 <li>A <a href="#prerelease">pre-release</a> announcement should be available
-approximately 24 hours before the final (non-rc) release.
+approximatelly 24 hours before the final (non-rc) release.
 </ul>
 
 <h2>Stable releases</h2>
@@ -69,7 +69,7 @@ approximately 24 hours before the final (non-rc) release.
 <li>Normally available once every two weeks.
 <li>Only the latest branch has releases. See note below.
 <li>A <a href="#prerelease">pre-release</a> announcement should be available
-approximately 48 hours before the actual release.
+approximatelly 48 hours before the actual release.
 </ul>
 
 <p>
@@ -115,38 +115,6 @@ performed where possible.
 Achieved by combination of local ad-hoc scripts and AppVeyor plus Travis-CI,
 the latter as part of their Github integration.
 </p>
-<p>
-<strong>Note:</strong> If a patch in the current queue needs any additional
-fix(es), then they should be squashed together.
-<br>
-The commit messages and the <code>cherry picked from</code> tags must be preserved.
-</p>
-<p>
-This should be noted in the <a href="#prerelease">pre-announce</a> email.
-<pre>
-    git show b10859ec41d09c57663a258f43fe57c12332698e
-
-    commit b10859ec41d09c57663a258f43fe57c12332698e
-    Author: Jonas Pfeil &ltpfeiljonas@gmx.de&gt
-    Date:   Wed Mar 1 18:11:10 2017 +0100
-
-        ralloc: Make sure ralloc() allocations match malloc()'s alignment.
-
-        The header of ralloc needs to be aligned, because the compiler assumes
-        ...
-
-        (cherry picked from commit cd2b55e536dc806f9358f71db438dd9c246cdb14)
-
-        Squashed with commit:
-
-        ralloc: don't leave out the alignment factor
-
-        Experimentation shows that without alignment factor gcc and clang choose
-        ...
-
-        (cherry picked from commit ff494fe999510ea40e3ed5827e7818550b6de126)
-</pre>
-</p>
 
 <h2>Regression/functionality testing</h2>
 
@@ -190,11 +158,6 @@ To setup the branchpoint:
 	git checkout master # make sure we're in master first
 	git tag -s X.Y-branchpoint -m "Mesa X.Y branchpoint"
 	git checkout -b X.Y
-	git checkout master
-	$EDITOR VERSION # bump the version number
-	git commit -as
-	cp docs/relnotes/{X.Y,X.Y+1}.html # copy/create relnotes template
-	git commit -as
 	git push origin X.Y-branchpoint X.Y
 </pre>
 
@@ -203,9 +166,9 @@ Now go to
 <a href="https://bugs.freedesktop.org/editversions.cgi?action=add&amp;product=Mesa" target="_parent">Bugzilla</a> and add the new Mesa version X.Y.
 </p>
 <p>
-Check that there are no distribution breaking changes and revert them if needed.
-For example: files being overwritten on install, etc. Happens extremely rarely -
-we had only one case so far (see commit 2ced8eb136528914e1bf4e000dea06a9d53c7e04).
+Check for rare that there are no distribution breaking changes and revert them
+if needed. Extremely rare - we had only one case so far (see
+commit 2ced8eb136528914e1bf4e000dea06a9d53c7e04).
 </p>
 <p>
 Proceed to <a href="#release">release</a> -rc1.
@@ -322,12 +285,6 @@ Queued (NUMBER)
 AUTHOR (NUMBER):
       COMMIT SUMMARY
 
-For example:
-
-Jonas Pfeil (1):
-      ralloc: Make sure ralloc() allocations match malloc()'s alignment.
-Squashed with
-      ralloc: don't leave out the alignment factor
 
 Rejected (NUMBER)
 =================
@@ -379,53 +336,43 @@ Here is one solution that I've been using.
 	chmod 755 -fR $__build_root; rm -rf $__build_root
 	mkdir -p $__build_root &amp;&amp; cd $__build_root
 
-	$__mesa_root/autogen.sh &amp;&amp; make -j2 distcheck
+	$__mesa_root/autogen.sh --enable-llvm-shared-libs &amp;&amp; make -j2 distcheck
 
-	# Build check the tarballs (scons, linux)
-	tar -xaf mesa-$__version.tar.xz &amp;&amp; cd mesa-$__version
-	scons
-	cd .. &amp;&amp; rm -rf mesa-$__version
-
-	# Build check the tarballs (scons, windows/mingw)
-	tar -xaf mesa-$__version.tar.xz &amp;&amp; cd mesa-$__version
-	scons platform=windows toolchain=crossmingw
-	cd .. &amp;&amp; rm -rf mesa-$__version
+	# Build check the tarballs (scons)
+	tar -xaf mesa-$__version.tar.xz &amp;&amp; cd mesa-$__version &amp;&amp; scons &amp;&amp; cd ..
 
 	# Test the automake binaries
+	rm -rf cd mesa-$__version
 	tar -xaf mesa-$__version.tar.xz &amp;&amp; cd mesa-$__version
 	./configure \
 		--with-dri-drivers=i965,swrast \
 		--with-gallium-drivers=swrast \
 		--with-vulkan-drivers=intel \
 		--enable-llvm-shared-libs \
-		--enable-llvm \
+		--enable-gallium-llvm \
 		--enable-glx-tls \
 		--enable-gbm \
 		--enable-egl \
-		--with-platforms=x11,drm,wayland,surfaceless
+		--with-egl-platforms=x11,drm,wayland
 	make -j2 &amp;&amp; DESTDIR=`pwd`/test make -j6 install
-	__glxinfo_cmd='glxinfo 2>&amp;1 | egrep -o "Mesa.*|Gallium.*|.*dri\.so"'
-	__glxgears_cmd='glxgears 2>&amp;1 | grep -v "configuration file"'
-	__es2info_cmd='es2_info 2>&amp;1 | egrep "GL_VERSION|GL_RENDERER|.*dri\.so"'
-	__es2gears_cmd='es2gears_x11 2>&amp;1 | grep -v "configuration file"'
 	export LD_LIBRARY_PATH=`pwd`/test/usr/local/lib/
 	export LIBGL_DRIVERS_PATH=`pwd`/test/usr/local/lib/dri/
 	export LIBGL_DEBUG=verbose
-	eval $__glxinfo_cmd
-	eval $__glxgears_cmd
-	eval $__es2info_cmd
-	eval $__es2gears_cmd
+	glxinfo | egrep -o "Mesa.*"
+	glxgears
+	es2_info | egrep "GL_VERSION|GL_RENDERER"
+	es2gears_x11
 	export LIBGL_ALWAYS_SOFTWARE=1
-	eval $__glxinfo_cmd
-	eval $__glxgears_cmd
-	eval $__es2info_cmd
-	eval $__es2gears_cmd
+	glxinfo | egrep -o "Mesa.*|Gallium.*"
+	glxgears
+	es2_info | egrep "GL_VERSION|GL_RENDERER"
+	es2gears_x11
 	export LIBGL_ALWAYS_SOFTWARE=1
 	export GALLIUM_DRIVER=softpipe
-	eval $__glxinfo_cmd
-	eval $__glxgears_cmd
-	eval $__es2info_cmd
-	eval $__es2gears_cmd
+	glxinfo | egrep -o "Mesa.*|Gallium.*"
+	glxgears
+	es2_info | egrep "GL_VERSION|GL_RENDERER"
+	es2gears_x11
 	# Smoke test DOTA2
 	unset LD_LIBRARY_PATH
 	unset LIBGL_DRIVERS_PATH
@@ -473,10 +420,11 @@ Commit these changes and push the branch.
 </pre>
 
 
-<h3>Use the release.sh script from xorg <a href="https://cgit.freedesktop.org/xorg/util/modular/">util-modular</a></h3>
+<h3>Use the release.sh script from xorg util-macros</h3>
 
 <p>
-Start the release process.
+Ensure that the mesa git tree is clean via <code>git clean -fXd</code> and
+start the release process.
 </p>
 <pre>
 	../relative/path/to/release.sh . # append --dist if you've already done distcheck above
@@ -490,7 +438,7 @@ and SSH passphrase(s) to sign and upload the files, respectively.
 <h3>Add the sha256sums to the release notes</h3>
 
 <p>
-Edit docs/relnotes/X.Y.Z.html to add the sha256sums as available in the mesa-X.Y.Z.announce template. Commit this change.
+Edit docs/relnotes/X.Y.Z.html to add the sha256sums as availabe in the mesa-X.Y.Z.announce template. Commit this change.
 </p>
 
 <h3>Back on mesa master, add the new release notes into the tree</h3>
@@ -524,10 +472,23 @@ Use the generated template during the releasing process.
 <h1 id="website">Update the mesa3d.org website</h1>
 
 <p>
-As the hosting was moved to freedesktop, git hooks are deployed to update the
-website. Manually check that it is updated 5-10 minutes after the final <code>git push</code>
+NOTE: The recent release managers have not been performing this step
+themselves, but leaving this to Brian Paul, (who has access to the
+sourceforge.net hosting for mesa3d.org). Brian is more than willing to grant
+the permission necessary to future release managers to do this step on their
+own.
 </p>
 
+<p>
+Update the web site by copying the docs/ directory's files to
+/home/users/b/br/brianp/mesa-www/htdocs/ with:
+<br>
+<code>
+sftp USERNAME,mesa3d@web.sourceforge.net
+</code>
+</p>
+
+
 <h1 id="bugzilla">Update Bugzilla</h1>
 
 <p>

docs/relnotes.html

@@ -21,14 +21,6 @@ The release notes summarize what's new or changed in each Mesa release.
 </p>
 
 <ul>
-<li><a href="relnotes/17.0.3.html">17.0.3 release notes</a>
-<li><a href="relnotes/17.0.2.html">17.0.2 release notes</a>
-<li><a href="relnotes/13.0.6.html">13.0.6 release notes</a>
-<li><a href="relnotes/17.0.1.html">17.0.1 release notes</a>
-<li><a href="relnotes/13.0.5.html">13.0.5 release notes</a>
-<li><a href="relnotes/17.0.0.html">17.0.0 release notes</a>
-<li><a href="relnotes/13.0.4.html">13.0.4 release notes</a>
-<li><a href="relnotes/12.0.6.html">12.0.6 release notes</a>
 <li><a href="relnotes/13.0.3.html">13.0.3 release notes</a>
 <li><a href="relnotes/12.0.5.html">12.0.5 release notes</a>
 <li><a href="relnotes/13.0.2.html">13.0.2 release notes</a>

docs/relnotes/12.0.6.html

@@ -1,148 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
-<html lang="en">
-<head>
-  <meta http-equiv="content-type" content="text/html; charset=utf-8">
-  <title>Mesa Release Notes</title>
-  <link rel="stylesheet" type="text/css" href="../mesa.css">
-</head>
-<body>
-
-<div class="header">
-  <h1>The Mesa 3D Graphics Library</h1>
-</div>
-
-<iframe src="../contents.html"></iframe>
-<div class="content">
-
-<h1>Mesa 12.0.6 Release Notes / January 23, 2017</h1>
-
-<p>
-Mesa 12.0.6 is a bug fix release which fixes bugs found since the 12.0.5 release.
-</p>
-<p>
-Mesa 12.0.6 implements the OpenGL 4.3 API, but the version reported by
-glGetString(GL_VERSION) or glGetIntegerv(GL_MAJOR_VERSION) /
-glGetIntegerv(GL_MINOR_VERSION) depends on the particular driver being used.
-Some drivers don't support all the features required in OpenGL 4.3.  OpenGL
-4.3 is <strong>only</strong> available if requested at context creation
-because compatibility contexts are not supported.
-</p>
-
-
-<h2>SHA256 checksums</h2>
-<pre>
-65339ba5d76a45225b8b56f9a1da9db15c569e1d163760faa2921da0a8461741  mesa-12.0.6.tar.gz
-7d6da9744c1022a4c2ab6ad01a206984d00443fb691568011d01b3dd97e36448  mesa-12.0.6.tar.xz
-</pre>
-
-
-<h2>New features</h2>
-<p>None</p>
-
-
-<h2>Bug fixes</h2>
-
-<p>This list is likely incomplete.</p>
-
-<ul>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=92234">Bug 92234</a> - [BDW] GPU hang in Shogun2</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=95130">Bug 95130</a> - Derivatives of gl_Color wrong when helper pixels used</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=98329">Bug 98329</a> - [dEQP, EGL, SKL, BDW, BSW] dEQP-EGL.functional.image.render_multiple_contexts.gles2_renderbuffer_depth16_depth_buffer</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99030">Bug 99030</a> - [HSW, regression] transform feedback fails on Linux 4.8</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99354">Bug 99354</a> - [G71] &quot;Assertion `bkref' failed&quot; reproducible with glmark2</li>
-
-</ul>
-
-<h2>Changes</h2>
-
-<p>Chad Versace (3):</p>
-<ul>
-  <li>i965/mt: Disable aux surfaces after making miptree shareable</li>
-  <li>i965/mt: Disable HiZ when sharing depth buffer externally (v2)</li>
-  <li>anv: Handle vkGetPhysicalDeviceQueueFamilyProperties with count == 0</li>
-</ul>
-
-<p>Emil Velikov (5):</p>
-<ul>
-  <li>docs: add sha256 checksums for 12.0.5</li>
-  <li>get-typod-pick-list.sh: add new script</li>
-  <li>automake: use shared llvm libs for make distcheck</li>
-  <li>egl/wayland: use the destroy_window_callback for swrast</li>
-  <li>Update version to 12.0.6</li>
-</ul>
-
-<p>Fredrik Höglund (1):</p>
-<ul>
-  <li>dri3: Fix MakeCurrent without a default framebuffer</li>
-</ul>
-
-<p>Ilia Mirkin (1):</p>
-<ul>
-  <li>nouveau: take extra push space into account for pushbuf_space calls</li>
-</ul>
-
-<p>Jason Ekstrand (19):</p>
-<ul>
-  <li>spirv/nir: Fix some texture opcode asserts</li>
-  <li>spirv/nir: Add support for shadow samplers that return vec4</li>
-  <li>spirv/nir: Properly handle gather components</li>
-  <li>anv/pipeline: Set binding_table.gather_texture_start</li>
-  <li>nir: Add a helper for determining the type of a texture source</li>
-  <li>nir/lower_tex: Add some helpers for working with tex sources</li>
-  <li>nir/lower_tex: Add support for lowering coordinate offsets</li>
-  <li>i965/nir: Enable NIR lowering of txf and rect offsets</li>
-  <li>i965: Get rid of the do_lower_unnormalized_offsets pass</li>
-  <li>spirv/nir: Don't increment coord_components for array lod queries</li>
-  <li>anv/image: Assert that the image format is actually supported</li>
-  <li>spirv/nir: Move opcode selection higher up in handle_texture</li>
-  <li>spirv/nir: Refactor type handling in handle_texture</li>
-  <li>nir/spirv: Refactor coordinate handling in handle_texture</li>
-  <li>spirv/nir: Handle texture projectors</li>
-  <li>spirv/nir: Add support for ImageQuerySamples</li>
-  <li>anv/device: Return the right error for failed maps</li>
-  <li>anv/device: Implicitly unmap memory objects in FreeMemory</li>
-  <li>anv/descriptor_set: Write the state offset in the surface state free list.</li>
-</ul>
-
-<p>Kenneth Graunke (2):</p>
-<ul>
-  <li>spirv: Move cursor before calling vtn_ssa_value() in phi 2nd pass.</li>
-  <li>i965: Properly flush in hsw_pause_transform_feedback().</li>
-</ul>
-
-<p>Marek Olšák (6):</p>
-<ul>
-  <li>cso: don't release sampler states that are bound</li>
-  <li>radeonsi: always restore sampler states when unbinding sampler views</li>
-  <li>radeonsi: fix incorrect FMASK checking in bind_sampler_states</li>
-  <li>radeonsi: disable CE on SI + AMDGPU</li>
-  <li>radeonsi: disable the constant engine (CE) on Carrizo and Stoney</li>
-  <li>gallium/radeon: fix the draw-calls HUD query</li>
-</ul>
-
-<p>Matt Turner (3):</p>
-<ul>
-  <li>i965/fs: Rename opt_copy_propagate -&gt; opt_copy_propagation.</li>
-  <li>i965/fs: Add unit tests for copy propagation pass.</li>
-  <li>i965/fs: Reject copy propagation into SEL if not min/max.</li>
-</ul>
-
-<p>Michel Dänzer (1):</p>
-<ul>
-  <li>cso: Don't restore nr_samplers in cso_restore_fragment_samplers</li>
-</ul>
-
-<p>Nicolai Hähnle (1):</p>
-<ul>
-  <li>radeonsi: enable WQM in PS prolog when needed</li>
-</ul>
-
-
-</div>
-</body>
-</html>

docs/relnotes/13.0.4.html

@@ -1,255 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
-<html lang="en">
-<head>
-  <meta http-equiv="content-type" content="text/html; charset=utf-8">
-  <title>Mesa Release Notes</title>
-  <link rel="stylesheet" type="text/css" href="../mesa.css">
-</head>
-<body>
-
-<div class="header">
-  <h1>The Mesa 3D Graphics Library</h1>
-</div>
-
-<iframe src="../contents.html"></iframe>
-<div class="content">
-
-<h1>Mesa 13.0.4 Release Notes / February 1, 2017</h1>
-
-<p>
-Mesa 13.0.4 is a bug fix release which fixes bugs found since the 13.0.3 release.
-</p>
-<p>
-Mesa 13.0.4 implements the OpenGL 4.4 API, but the version reported by
-glGetString(GL_VERSION) or glGetIntegerv(GL_MAJOR_VERSION) /
-glGetIntegerv(GL_MINOR_VERSION) depends on the particular driver being used.
-Some drivers don't support all the features required in OpenGL 4.4.  OpenGL
-4.4 is <strong>only</strong> available if requested at context creation
-because compatibility contexts are not supported.
-</p>
-
-
-<h2>SHA256 checksums</h2>
-<pre>
-a78518030b0b7d77a6c426ac3ff40f4b27fb0e2cdb0dfbe685024a46cae59bad  mesa-13.0.4.tar.gz
-a95d7ce8f7bd5f88585e4be3144a341236d8c0fc91f6feaec59bb8ba3120e726  mesa-13.0.4.tar.xz
-</pre>
-
-
-<h2>New features</h2>
-<p>None</p>
-
-
-<h2>Bug fixes</h2>
-
-<ul>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=92634">Bug 92634</a> - gallium's vl_mpeg12_decoder does not work with st/va</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=94512">Bug 94512</a> - X segfaults with glx-tls enabled in a x32 environment</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=94900">Bug 94900</a> - HD6950 GPU lockup loop with various steam games (octodad[always], saints row 4[always], dead island[always], grid autosport[sometimes])</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=98263">Bug 98263</a> - [radv] The Talos Principle fails to launch with &quot;Fatal error: Cannot set display mode.&quot;</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=98914">Bug 98914</a> - mesa-vdpau-drivers: breaks vdpau for mpeg2video</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=98975">Bug 98975</a> - Wasteland 2 Directors Cut: Hangs. GPU fault</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99030">Bug 99030</a> - [HSW, regression] transform feedback fails on Linux 4.8</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99085">Bug 99085</a> - [EGL] dEQP-EGL.functional.sharing.gles2.multithread intermittent</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99097">Bug 99097</a> - [vulkancts] dEQP-VK.image.store regression</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99100">Bug 99100</a> - [SKL,BDW,BSW,KBL] dEQP-VK.glsl.return.return_in_dynamic_loop_dynamic_vertex regression</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99144">Bug 99144</a> - Incorrect rendering using glDrawArraysInstancedBaseInstance and first != 0 on Skylake</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99154">Bug 99154</a> - Link time error when using multiple builtin functions</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99158">Bug 99158</a> - vdpau segfaults and gpu locks with kodi on R9285</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99185">Bug 99185</a> - dEQP-EGL.functional.image.modify.tex_rgb5_a1_tex_subimage_rgba8</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99188">Bug 99188</a> - dEQP-EGL.functional.create_context_ext.robust_gl_30.rgb565_no_depth_no_stencil</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99210">Bug 99210</a> - ES3-CTS.functional.texture.mipmap.cube.generate.rgba5551_*</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99354">Bug 99354</a> - [G71] &quot;Assertion `bkref' failed&quot; reproducible with glmark2</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99450">Bug 99450</a> - [amdgpu] Payday 2 visual glitches on some models</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99451">Bug 99451</a> - polygon offset use after free</li>
-
-</ul>
-
-
-<h2>Changes</h2>
-
-<p>Andres Rodriguez (2):</p>
-<ul>
-  <li>vulkan/wsi: clarify the severity of lack of DRI3 v2</li>
-  <li>radv: fix include order for installed headers v2</li>
-</ul>
-
-<p>Arda Coskunses (2):</p>
-<ul>
-  <li>vulkan/wsi/x11: don't crash on null visual</li>
-  <li>vulkan/wsi/x11: don't crash on null wsi x11 connection</li>
-</ul>
-
-<p>Bas Nieuwenhuizen (1):</p>
-<ul>
-  <li>radv: Support loader interface version 3.</li>
-</ul>
-
-<p>Chad Versace (10):</p>
-<ul>
-  <li>egl: Check config's surface types in eglCreate*Surface()</li>
-  <li>dri: Add __DRI_IMAGE_FORMAT_ARGB1555</li>
-  <li>mesa/texformat: Handle GL_RGBA + GL_UNSIGNED_SHORT_5_5_5_1</li>
-  <li>egl: Emit correct error when robust context creation fails</li>
-  <li>anv: Handle vkGetPhysicalDeviceQueueFamilyProperties with count == 0</li>
-  <li>mesa/shaderobj: Fix races on refcounts</li>
-  <li>meta: Disable dithering during glGenerateMipmap</li>
-  <li>vulkan: Add new cast macros for VkIcd types</li>
-  <li>vulkan: Update vk_icd.h to interface version 3</li>
-  <li>anv: Support loader interface version 3 (patch v2)</li>
-</ul>
-
-<p>Christian König (1):</p>
-<ul>
-  <li>vl/zscan: fix "Fix trivial sign compare warnings"</li>
-</ul>
-
-<p>Chuck Atkins (1):</p>
-<ul>
-  <li>glx: Add missing glproto dependency for gallium-xlib glx</li>
-</ul>
-
-<p>Damien Grassart (1):</p>
-<ul>
-  <li>anv: return count of queue families written</li>
-</ul>
-
-<p>Dave Airlie (1):</p>
-<ul>
-  <li>radv: flush smem for uniform buffer bit.</li>
-</ul>
-
-<p>Emil Velikov (10):</p>
-<ul>
-  <li>docs: add sha256 checksums for 13.0.3</li>
-  <li>cherry-ignore: add couple of intel_miptree_copy related patches</li>
-  <li>cherry-ignore: add radv: Call nir_lower_constant_initializers."</li>
-  <li>get-typod-pick-list.sh: add new script</li>
-  <li>cherry-ignore: add "_mesa_ClampColor extension/version fix"</li>
-  <li>cherry-ignore: add wayland race condition fix</li>
-  <li>egl/wayland: use the destroy_window_callback for swrast</li>
-  <li>automake: use shared llvm libs for make distcheck</li>
-  <li>get-pick-list.sh: Require explicit "13.0" for nominating stable patches</li>
-  <li>Update version to 13.0.4</li>
-</ul>
-
-<p>Francisco Jerez (1):</p>
-<ul>
-  <li>anv: Fix uniform and storage buffer offset alignment limits.</li>
-</ul>
-
-<p>Fredrik Höglund (2):</p>
-<ul>
-  <li>radv: fix dual source blending</li>
-  <li>dri3: Fix MakeCurrent without a default framebuffer</li>
-</ul>
-
-<p>Grazvydas Ignotas (1):</p>
-<ul>
-  <li>mapi: update the asm code to support x32</li>
-</ul>
-
-<p>Heiko Przybyl (1):</p>
-<ul>
-  <li>r600/sb: Fix loop optimization related hangs on eg</li>
-</ul>
-
-<p>Ilia Mirkin (1):</p>
-<ul>
-  <li>nouveau: take extra push space into account for pushbuf_space calls</li>
-</ul>
-
-<p>Jason Ekstrand (4):</p>
-<ul>
-  <li>i965/generator/tex: Handle an immediate sampler with an indirect texture</li>
-  <li>anv/formats: Use the real format for B4G4R4A4_UNORM_PACK16 on gen8</li>
-  <li>nir/search: Only allow matching SSA values</li>
-  <li>isl: Mark A4B4G4R4_UNORM as supported on gen8</li>
-</ul>
-
-<p>Jonas Ådahl (1):</p>
-<ul>
-  <li>egl/wayland: Cleanup private display connection when init fails</li>
-</ul>
-
-<p>Kenneth Graunke (7):</p>
-<ul>
-  <li>i965: Don't bail on vertex element processing if we need draw params.</li>
-  <li>i965: Fix last slot calculations</li>
-  <li>i965: Fix texturing in the vec4 TCS and GS backends.</li>
-  <li>spirv: Move cursor before calling vtn_ssa_value() in phi 2nd pass.</li>
-  <li>i965: Make BLORP disable the NP Z PMA stall fix.</li>
-  <li>glsl: Use ir_var_temporary when generating inline functions.</li>
-  <li>i965: Properly flush in hsw_pause_transform_feedback().</li>
-</ul>
-
-<p>Marek Olšák (4):</p>
-<ul>
-  <li>vdpau: call texture_get_handle while the mutex is being held</li>
-  <li>va: call texture_get_handle while the mutex is being held</li>
-  <li>radeonsi: for the tess barrier, only use emit_waitcnt on SI and LLVM 3.9+</li>
-  <li>radeonsi: don't forget to add HTILE to the buffer list for texturing</li>
-</ul>
-
-<p>Michel Dänzer (1):</p>
-<ul>
-  <li>cso: Don't restore nr_samplers in cso_restore_fragment_samplers</li>
-</ul>
-
-<p>Nanley Chery (3):</p>
-<ul>
-  <li>anv/cmd_buffer: Fix arrayed depth/stencil attachments</li>
-  <li>anv/cmd_buffer: Fix programmed HiZ qpitch</li>
-  <li>anv/image: Disable HiZ for depth buffer arrays</li>
-</ul>
-
-<p>Nayan Deshmukh (1):</p>
-<ul>
-  <li>st/va: delay calling begin_frame until we have all parameters</li>
-</ul>
-
-<p>Rob Clark (1):</p>
-<ul>
-  <li>freedreno: some fence cleanup</li>
-</ul>
-
-<p>Samuel Pitoiset (1):</p>
-<ul>
-  <li>gallium/hud: add missing break in hud_cpufreq_graph_install()</li>
-</ul>
-
-<p>Timothy Arceri (3):</p>
-<ul>
-  <li>nir: Turn imov/fmov of undef into undef</li>
-  <li>glsl: fix opt_minmax redundancy checks against baserange</li>
-  <li>util: fix list_is_singular()</li>
-</ul>
-
-<p>Zachary Michaels (1):</p>
-<ul>
-  <li>radeonsi: Always leave poly_offset in a valid state</li>
-</ul>
-
-
-</div>
-</body>
-</html>

docs/relnotes/13.0.5.html

@@ -1,210 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
-<html lang="en">
-<head>
-  <meta http-equiv="content-type" content="text/html; charset=utf-8">
-  <title>Mesa Release Notes</title>
-  <link rel="stylesheet" type="text/css" href="../mesa.css">
-</head>
-<body>
-
-<div class="header">
-  <h1>The Mesa 3D Graphics Library</h1>
-</div>
-
-<iframe src="../contents.html"></iframe>
-<div class="content">
-
-<h1>Mesa 13.0.5 Release Notes / February 20, 2017</h1>
-
-<p>
-Mesa 13.0.5 is a bug fix release which fixes bugs found since the 13.0.4 release.
-</p>
-<p>
-Mesa 13.0.5 implements the OpenGL 4.4 API, but the version reported by
-glGetString(GL_VERSION) or glGetIntegerv(GL_MAJOR_VERSION) /
-glGetIntegerv(GL_MINOR_VERSION) depends on the particular driver being used.
-Some drivers don't support all the features required in OpenGL 4.4.  OpenGL
-4.4 is <strong>only</strong> available if requested at context creation
-because compatibility contexts are not supported.
-</p>
-
-
-<h2>SHA256 checksums</h2>
-<pre>
-7e45e3812078726eabca6d9384364bf035a3c4279024ec9090dd1b19a8989926  mesa-13.0.5.tar.gz
-bfcea7e2c801525a60895c8aff11aa68457ee9aa35d01a4638e1f310a3f5ef87  mesa-13.0.5.tar.xz
-</pre>
-
-
-<h2>New features</h2>
-<p>None</p>
-
-
-<h2>Bug fixes</h2>
-
-<ul>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=98329">Bug 98329</a> - [dEQP, EGL, SKL, BDW, BSW] dEQP-EGL.functional.image.render_multiple_contexts.gles2_renderbuffer_depth16_depth_buffer</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=98421">Bug 98421</a> - src/loader/loader.c:111:40: error: unknown type name ‘drmDevicePtr’</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=98526">Bug 98526</a> - glsl/tests/general-ir-test regression</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99532">Bug 99532</a> - Compute shader doesn't give right result under some circumstances</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99631">Bug 99631</a> - segfault with OSVRTrackerView and openscenegraph git master</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99633">Bug 99633</a> - rasterizer/core/clip.h:279:49: error: ‘const struct API_STATE’ has no member named ‘linkageCount’</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99692">Bug 99692</a> - [radv] Mostly broken on Hawaii PRO/CIK ASICs</li>
-
-</ul>
-
-<h2>Changes</h2>
-
-<p>Bartosz Tomczyk (2):</p>
-<ul>
-  <li>r600: Fix stack overflow</li>
-  <li>r600/sb: Fix memory leak</li>
-</ul>
-
-<p>Bruce Cherniak (1):</p>
-<ul>
-  <li>swr: [rasterizer core] Remove dead code Clipper::ClipScalar()</li>
-</ul>
-
-<p>Chad Versace (1):</p>
-<ul>
-  <li>i965/mt: Disable HiZ when sharing depth buffer externally (v2)</li>
-</ul>
-
-<p>Dave Airlie (3):</p>
-<ul>
-  <li>radv: change base aligmment for allocated memory.</li>
-  <li>radv: fix cik macroModeIndex.</li>
-  <li>radv: adopt some init config workarounds from radeonsi.</li>
-</ul>
-
-<p>Derek Foreman (1):</p>
-<ul>
-  <li>egl/dri2: add image_loader_extension back into loader extensions for wayland</li>
-</ul>
-
-<p>Emil Velikov (26):</p>
-<ul>
-  <li>docs: add sha256 checksums for 13.0.4</li>
-  <li>configure.ac: list radeon in --with-vulkan-drivers help string</li>
-  <li>i965: automake: correctly set MKDIR_GEN</li>
-  <li>freedreno: automake: correctly set MKDIR_GEN</li>
-  <li>i965: automake: include builddir prior to srcdir</li>
-  <li>i915: automake: include builddir prior to srcdir</li>
-  <li>egl: automake: include builddir prior to srcdir</li>
-  <li>clover: automake: include builddir prior to srcdir</li>
-  <li>st/dri: automake: include builddir prior to srcdir</li>
-  <li>d3dadapter9: automake: include builddir prior to srcdir</li>
-  <li>glx: automake: include builddir prior to srcdir</li>
-  <li>glx/apple: automake: include builddir prior to srcdir</li>
-  <li>glx/windows: automake: include builddir prior to srcdir</li>
-  <li>loader: automake: include builddir prior to srcdir</li>
-  <li>mapi: automake: include builddir prior to srcdir</li>
-  <li>radeon, r200: automake: include builddir prior to srcdir</li>
-  <li>dri/swrast: automake: include builddir prior to srcdir</li>
-  <li>dri/osmesa: automake: include builddir prior to srcdir</li>
-  <li>mesa/tests: automake: include builddir prior to srcdir</li>
-  <li>bin/get-extra-pick-list: use git merge-base to get the branchpoint</li>
-  <li>bin/get-extra-pick-list: rework to use already_picked list</li>
-  <li>bin/get-typod-pick-list.sh: limit `git grep ...' to only as needed</li>
-  <li>bin/get-pick-list.sh: limit `git grep ...' only as needed</li>
-  <li>bin/get-pick-list.sh: remove ancient way of nominating patches</li>
-  <li>bin/get-fixes-pick-list.sh: add new script</li>
-  <li>Update version to 13.0.5</li>
-</ul>
-
-<p>Eric Anholt (1):</p>
-<ul>
-  <li>vc4: Avoid emitting small immediates for UBO indirect load address guards.</li>
-</ul>
-
-<p>Hans de Goede (1):</p>
-<ul>
-  <li>glx/glvnd: Fix GLXdispatchIndex sorting</li>
-</ul>
-
-<p>Ian Romanick (11):</p>
-<ul>
-  <li>linker: Slight code rearrange to prevent duplication in the next commit</li>
-  <li>linker: Accurately track gl_uniform_block::stageref</li>
-  <li>glsl: Split process_block_array into two functions</li>
-  <li>glsl: Fix wonkey indentation left from previous commit</li>
-  <li>glsl: Track the linearized array index for each UBO instance array element</li>
-  <li>glsl: Use simpler visitor to determine which UBO and SSBO blocks are used</li>
-  <li>glsl: Add tracking for elements of an array-of-arrays that have been accessed</li>
-  <li>glsl: Add structures to track accessed elements of a single array</li>
-  <li>glsl: Mark a set of array elements as accessed using a list of array_deref_range</li>
-  <li>glsl: Walk a list of ir_dereference_array to mark array elements as accessed</li>
-  <li>linker: Accurately mark a uniform block instance array element as used in a stage</li>
-</ul>
-
-<p>Ilia Mirkin (3):</p>
-<ul>
-  <li>vbo: process buffer binding state changes on draw when recording</li>
-  <li>st/mesa: MAX_VARYING is the max supported number of patch varyings, not min</li>
-  <li>nvc0: disable linked tsc mode in compute launch descriptor</li>
-</ul>
-
-<p>Jason Ekstrand (11):</p>
-<ul>
-  <li>nir/search: Use the correct bit size for integer comparisons</li>
-  <li>i965/blorp: Use the correct ISL format for combined depth/stencil</li>
-  <li>intel/blorp: Handle clearing of A4B4G4R4 on all platforms</li>
-  <li>isl/formats: Only advertise sampling for A4B4G4R4 on Broadwell</li>
-  <li>anv: Flush render cache before STATE_BASE_ADDRESS on gen7</li>
-  <li>anv: Improve flushing around STATE_BASE_ADDRESS</li>
-  <li>vulkan/wsi/wayland: Handle VK_INCOMPLETE for GetFormats</li>
-  <li>vulkan/wsi/wayland: Handle VK_INCOMPLETE for GetPresentModes</li>
-  <li>vulkan/wsi: Lower the maximum image sizes</li>
-  <li>i965/sampler_state: Pass texObj into update_sampler_state</li>
-  <li>i965/sampler_state: Set the "Base Mip Level" field on Sandy Bridge</li>
-</ul>
-
-<p>Kenneth Graunke (1):</p>
-<ul>
-  <li>i965: Unbind deleted shaders from brw_context, fixing malloc heisenbug.</li>
-</ul>
-
-<p>Lionel Landwerlin (5):</p>
-<ul>
-  <li>anv: don't require render target isl bit for depth/stencil surfaces</li>
-  <li>anv: set command buffer to NULL when allocations fail</li>
-  <li>anv: fix descriptor pool internal size allocation</li>
-  <li>spirv: handle OpUndef as part of the variable parsing pass</li>
-  <li>spirv: handle undefined components for OpVectorShuffle</li>
-</ul>
-
-<p>Marc-André Lureau (1):</p>
-<ul>
-  <li>tgsi-dump: dump label if instruction has one</li>
-</ul>
-
-<p>Marek Olšák (2):</p>
-<ul>
-  <li>radeonsi: always set the TCL1_ACTION_ENA when invalidating L2</li>
-  <li>gallium/radeon: fix performance of buffer readbacks</li>
-</ul>
-
-<p>Topi Pohjolainen (2):</p>
-<ul>
-  <li>i965: Make depth clear flushing more explicit</li>
-  <li>i965/gen6: Issue direct depth stall and flush after depth clear</li>
-</ul>
-
-<p>Vinson Lee (2):</p>
-<ul>
-  <li>scons: Require libdrm &gt;= 2.4.66 for DRM.</li>
-  <li>util: Fix Clang trivial destructor check.</li>
-</ul>
-
-
-</div>
-</body>
-</html>

docs/relnotes/13.0.6.html

@@ -1,287 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
-<html lang="en">
-<head>
-  <meta http-equiv="content-type" content="text/html; charset=utf-8">
-  <title>Mesa Release Notes</title>
-  <link rel="stylesheet" type="text/css" href="../mesa.css">
-</head>
-<body>
-
-<div class="header">
-  <h1>The Mesa 3D Graphics Library</h1>
-</div>
-
-<iframe src="../contents.html"></iframe>
-<div class="content">
-
-<h1>Mesa 13.0.6 Release Notes / March 20, 2017</h1>
-
-<p>
-Mesa 13.0.6 is a bug fix release which fixes bugs found since the 13.0.5 release.
-</p>
-<p>
-Mesa 13.0.6 implements the OpenGL 4.4 API, but the version reported by
-glGetString(GL_VERSION) or glGetIntegerv(GL_MAJOR_VERSION) /
-glGetIntegerv(GL_MINOR_VERSION) depends on the particular driver being used.
-Some drivers don't support all the features required in OpenGL 4.4.  OpenGL
-4.4 is <strong>only</strong> available if requested at context creation
-because compatibility contexts are not supported.
-</p>
-
-
-<h2>SHA256 checksums</h2>
-<pre>
-1076590f29103f022a2cd87e6dff6ae77072013745603d06b0410c373ab2bb1a  mesa-13.0.6.tar.gz
-29ef104a7fc082d352b1599bd6cb1d040be424ccd22f5e0eb7ee9b0e9acd3597  mesa-13.0.6.tar.xz
-</pre>
-
-
-<h2>New features</h2>
-<p>None</p>
-
-
-<h2>Bug fixes</h2>
-
-<ul>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=68504">Bug 68504</a> - 9.2-rc1 workaround for clover build failure on ppc/altivec: cannot convert 'bool' to '__vector(4) __bool int' in return</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=97102">Bug 97102</a> - [dri][swr] stack overflow / infinite loop with GALLIUM_DRIVER=swr</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=98869">Bug 98869</a> - Electronic Super Joy graphic artefacts (regression,bisected)</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99401">Bug 99401</a> - [g33] regression: piglit.spec.!opengl 1_0.gl-1_0-beginend-coverage</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99456">Bug 99456</a> - Firefox crashing when opening about:support with WebGL2 enabled</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99677">Bug 99677</a> - heap-use-after-free in glsl</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99715">Bug 99715</a> - Don't print: &quot;Note: Buggy applications may crash, if they do please report to vendor&quot;</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99850">Bug 99850</a> - Tessellation bug on Carrizo</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100049">Bug 100049</a> - &quot;ralloc: Make sure ralloc() allocations match malloc()'s alignment.&quot; causes seg fault in 32bit build</li>
-
-</ul>
-
-<h2>Changes</h2>
-
-<p>Alex Smith (2):</p>
-<ul>
-  <li>radv: Emit pending flushes before executing a secondary command buffer</li>
-  <li>radv: Flush before copying with PKT3_WRITE_DATA in CmdUpdateBuffer</li>
-</ul>
-
-<p>Bartosz Tomczyk (1):</p>
-<ul>
-  <li>glsl: fix heap-buffer-overflow</li>
-</ul>
-
-<p>Bas Nieuwenhuizen (8):</p>
-<ul>
-  <li>radv: Pass CMASK alignment to application.</li>
-  <li>radv: Pass DCC alignment to application.</li>
-  <li>radv: Never try to create more than max_sets descriptor sets.</li>
-  <li>radv: Reset emitted compute pipeline when calling secondary cmd buffer.</li>
-  <li>radv: Only use PKT3_OCCLUSION_QUERY when it doesn't hang.</li>
-  <li>radv: Use correct size for availability flag.</li>
-  <li>radv: Disable HTILE for textures with multiple layers/levels.</li>
-  <li>radv: Emit cache flushes before CP DMA.</li>
-</ul>
-
-<p>Ben Crocker (3):</p>
-<ul>
-  <li>gallivm: Improve debug output (V2)</li>
-  <li>gallivm: Override getHostCPUName() "generic" w/ "pwr8" (v4)</li>
-  <li>gallivm: Reenable PPC VSX (v3)</li>
-</ul>
-
-<p>Brendan King (1):</p>
-<ul>
-  <li>egl/dri3: implement query surface hook</li>
-</ul>
-
-<p>Bruce Cherniak (1):</p>
-<ul>
-  <li>swr: Prune empty nodes in CalculateProcessorTopology.</li>
-</ul>
-
-<p>Connor Abbott (1):</p>
-<ul>
-  <li>anv: fix Get*MemoryRequirements for !LLC</li>
-</ul>
-
-<p>Dave Airlie (13):</p>
-<ul>
-  <li>radv: program a default point size.</li>
-  <li>radv: handle transfer_write as a dst flag.</li>
-  <li>radv/ac: handle nir irem opcode.</li>
-  <li>radv/ac: implement txs for buffer textures.</li>
-  <li>radv/ac: correctly size shared memory usage.</li>
-  <li>radv/ac: avoid the fmask path when doing txs.</li>
-  <li>radv: pass FMASK alignment to application</li>
-  <li>tgsi: fix memory leak in tgsi sanity check</li>
-  <li>radv: fix depth format in blit2d.</li>
-  <li>radv: fix txs for sampler buffers</li>
-  <li>radv: drop Z24 support.</li>
-  <li>radv: disable mip point pre clamping.</li>
-  <li>radv: setup llvm target data layout</li>
-</ul>
-
-<p>Emil Velikov (6):</p>
-<ul>
-  <li>docs: add sha256 checksums for 13.0.5</li>
-  <li>Revert "get-pick-list.sh: Require explicit "13.0" for nominating stable patches"</li>
-  <li>cherry-ignore: don't pick nir_op_pack_double optimisation fix</li>
-  <li>i965: move brw_define.h ifndef guard to the top</li>
-  <li>cherry-ignore: add ANV fast clears related fixes</li>
-  <li>Update version to 13.0.6</li>
-</ul>
-
-<p>Fredrik Höglund (2):</p>
-<ul>
-  <li>radv: fix the dynamic buffer index in vkCmdBindDescriptorSets</li>
-  <li>radv/ac: fix multiple descriptor sets with dynamic buffers</li>
-</ul>
-
-<p>George Kyriazis (1):</p>
-<ul>
-  <li>swr: Align query results allocation</li>
-</ul>
-
-<p>Grazvydas Ignotas (3):</p>
-<ul>
-  <li>r300g: only allow byteswapped formats on big endian</li>
-  <li>gallium/u_queue: fix a crash with atexit handlers</li>
-  <li>gallium/u_queue: set num_threads correctly if not all threads start</li>
-</ul>
-
-<p>Gregory Hainaut (1):</p>
-<ul>
-  <li>glapi: fix typo in count_scale</li>
-</ul>
-
-<p>Ian Romanick (1):</p>
-<ul>
-  <li>mesa: Don't advertise GL_OES_read_format in core profile</li>
-</ul>
-
-<p>Ilia Mirkin (8):</p>
-<ul>
-  <li>nvc0: increase number of ubo binding points</li>
-  <li>nvc0/ir: fix robustness guarantees for constbuf loads on kepler+ compute</li>
-  <li>nvc0/ir: fix ubo max clamp, reset file index</li>
-  <li>gm107/ir: fix address offset bitfield for ATOMS</li>
-  <li>nvc0: set the render condition in the compute object</li>
-  <li>st/mesa: don't pass compare mode for stencil-sampled textures</li>
-  <li>nvc0: take extra pushbuf space into account for pushbuf_space calls</li>
-  <li>nvc0: increase alignment to 256 for texture buffers on fermi</li>
-</ul>
-
-<p>Jacob Lifshay (1):</p>
-<ul>
-  <li>vulkan/wsi: Improve the DRI3 error message</li>
-</ul>
-
-<p>Jason Ekstrand (11):</p>
-<ul>
-  <li>i965: Use a better guardband calculation.</li>
-  <li>intel/blorp: Swizzle clear colors on the CPU</li>
-  <li>i965/fs: Remove the inline pack_double_2x32 optimization</li>
-  <li>anv: Add an invalidate_range helper</li>
-  <li>anv/query: clflush the bo map on non-LLC platforms</li>
-  <li>genxml: Make MI_STORE_DATA_IMM more consistent</li>
-  <li>anv/query: Perform CmdResetQueryPool on the GPU</li>
-  <li>blorp/exec: Use uint32_t for copying varying data</li>
-  <li>intel/blorp: Explicitly flush all allocated state</li>
-  <li>anv: Accurately advertise dynamic descriptor limits</li>
-  <li>anv: Properly handle destroying NULL devices and instances</li>
-</ul>
-
-<p>Jonas Pfeil (1):</p>
-<ul>
-  <li>ralloc: Make sure ralloc() allocations match malloc()'s alignment.</li>
-</ul>
-
-<p>Jose Maria Casanova Crespo (1):</p>
-<ul>
-  <li>glsl: non-last member unsized array on SSBO must fail compilation on GLSL ES 3.1</li>
-</ul>
-
-<p>Kenneth Graunke (7):</p>
-<ul>
-  <li>i965: Fix fast depth clears for surfaces with a dimension of 16384.</li>
-  <li>i965: Use a UW source type for CS_OPCODE_CS_TERMINATE.</li>
-  <li>i965: Fix check for negative pitch in can_do_fast_copy_blit().</li>
-  <li>i965: Support the force_glsl_version driconf option.</li>
-  <li>i965: Combine the Gen6 SF and Clip viewport atoms.</li>
-  <li>mesa: Do (TCS &amp;&amp; !TES) draw time validation in ES as well.</li>
-  <li>egl: Ensure ResetNotificationStrategy matches for shared contexts.</li>
-</ul>
-
-<p>Lionel Landwerlin (3):</p>
-<ul>
-  <li>spirv: don't assert with location decorations on non i/o variables</li>
-  <li>anv: wsi: report presentation error per image request</li>
-  <li>i965/fs: fix uninitialized memory access</li>
-</ul>
-
-<p>Marc Di Luzio (1):</p>
-<ul>
-  <li>glsl: correct compute shader checks for memoryBarrier functions</li>
-</ul>
-
-<p>Marek Olšák (10):</p>
-<ul>
-  <li>st/mesa: destroy pipe_context before destroying st_context (v2)</li>
-  <li>radeonsi: don't invoke DCC decompression in update_all_texture_descriptors</li>
-  <li>radeonsi: fix UNSIGNED_BYTE index buffer fallback with non-zero start (v2)</li>
-  <li>gallium/util: remove unused u_index_modify helpers</li>
-  <li>gallium/u_index_modify: don't add PIPE_TRANSFER_UNSYNCHRONIZED unconditionally</li>
-  <li>gallium/u_queue: fix random crashes when the app calls exit()</li>
-  <li>st/mesa: reset sample_mask, min_sample, and render_condition for PBO ops</li>
-  <li>st/mesa: set blend state for PBO readbacks</li>
-  <li>radeonsi: fix broken tessellation on Carrizo and Stoney</li>
-  <li>radeonsi: mark all bound shader buffer ranges as initialized</li>
-</ul>
-
-<p>Matt Turner (1):</p>
-<ul>
-  <li>clover: Work around build failure with AltiVec.</li>
-</ul>
-
-<p>Nicolai Hähnle (12):</p>
-<ul>
-  <li>mesa/main: fix meta caller of _mesa_ClampColor</li>
-  <li>radeonsi: fix texture gather on stencil textures</li>
-  <li>glsl: split DIV_TO_MUL_RCP into single- and double-precision flags</li>
-  <li>glx/dri3: handle NULL pointers in loader-to-DRI3 drawable conversion</li>
-  <li>glx/dri3: guard in_current_context against a disappeared drawable</li>
-  <li>glx: guard swap-interval functions against destroyed drawables</li>
-  <li>dri/common: clear the loaderPrivate pointer in driDestroyDrawable</li>
-  <li>winsys/amdgpu: reduce max_alloc_size based on GTT limits</li>
-  <li>radeonsi: handle MultiDrawIndirect in si_get_draw_start_count</li>
-  <li>radeonsi: fix UINT/SINT clamping for 10-bit formats on &lt;= CIK</li>
-  <li>st/glsl_to_tgsi: avoid iterating past the head of the instruction list</li>
-  <li>st/mesa: inform the driver of framebuffer changes before compute dispatches</li>
-</ul>
-
-<p>Samuel Iglesias Gonsálvez (6):</p>
-<ul>
-  <li>glsl: fix heap-use-after-free in ast_declarator_list::hir()</li>
-  <li>i965/fs: mark last DF uniform array element as 64 bit live one</li>
-  <li>i965/fs: detect different bit size accesses to uniforms to push them in proper locations</li>
-  <li>i965/fs: fix indirect load DF uniforms on BSW/BXT</li>
-  <li>i965/fs: fix source type when emitting MOV_INDIRECT to read ICP handles</li>
-  <li>i965/fs: emit MOV_INDIRECT with the source with the right register type</li>
-</ul>
-
-<p>Samuel Pitoiset (1):</p>
-<ul>
-  <li>winsys/amdgpu: avoid potential segfault in amdgpu_bo_map()</li>
-</ul>
-
-
-</div>
-</body>
-</html>

docs/relnotes/17.0.4.html

@@ -0,0 +1,149 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
+<html lang="en">
+<head>
+  <meta http-equiv="content-type" content="text/html; charset=utf-8">
+  <title>Mesa Release Notes</title>
+  <link rel="stylesheet" type="text/css" href="../mesa.css">
+</head>
+<body>
+
+<div class="header">
+  <h1>The Mesa 3D Graphics Library</h1>
+</div>
+
+<iframe src="../contents.html"></iframe>
+<div class="content">
+
+<h1>Mesa 17.0.4 Release Notes / April 17, 2017</h1>
+
+<p>
+Mesa 17.0.4 is a bug fix release which fixes bugs found since the 17.0.3 release.
+</p>
+<p>
+Mesa 17.0.4 implements the OpenGL 4.5 API, but the version reported by
+glGetString(GL_VERSION) or glGetIntegerv(GL_MAJOR_VERSION) /
+glGetIntegerv(GL_MINOR_VERSION) depends on the particular driver being used.
+Some drivers don't support all the features required in OpenGL 4.5.  OpenGL
+4.5 is <strong>only</strong> available if requested at context creation
+because compatibility contexts are not supported.
+</p>
+
+
+<h2>SHA256 checksums</h2>
+<pre>
+c4c34ba05d48f76b45bc05bc4b6e9242077f403d63c4f0c355c7b07786de233e  mesa-17.0.4.tar.gz
+1269dc8545a193932a0779b2db5bce9be4a5f6813b98c38b93b372be8362a346  mesa-17.0.4.tar.xz
+</pre>
+
+
+<h2>New features</h2>
+<p>None</p>
+
+
+<h2>Bug fixes</h2>
+
+<ul>
+
+<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99515">Bug 99515</a> - SIGSEGV MAPERR on Android nougat-x86 with mesa 17.0.0rc</li>
+
+<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100391">Bug 100391</a> - SachaWillems deferredmultisampling asserts</li>
+
+<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100452">Bug 100452</a> - push_constants host memory leak when resetting command buffer</li>
+
+<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100582">Bug 100582</a> - [GEN8+] piglit.spec.arb_stencil_texturing.glblitframebuffer corrupts state.gl_texture* assertions</li>
+
+</ul>
+
+
+<h2>Changes</h2>
+
+<p>Alex Deucher (1):</p>
+<ul>
+  <li>radeonsi: add new polaris10 pci id</li>
+</ul>
+
+<p>Alex Smith (1):</p>
+<ul>
+  <li>radv: Invalidate L2 for TRANSFER_WRITE barriers</li>
+</ul>
+
+<p>Andres Gomez (1):</p>
+<ul>
+  <li>docs: add sha256 checksums for 17.0.3</li>
+</ul>
+
+<p>Craig Stout (1):</p>
+<ul>
+  <li>anv/cmd_buffer: fix host memory leak</li>
+</ul>
+
+<p>Emil Velikov (3):</p>
+<ul>
+  <li>Revert "cherry-ignore: add the Flush after unmap in gbm/dri fix"</li>
+  <li>Revert "freedreno: fix memory leak"</li>
+  <li>Update version to 17.0.4</li>
+</ul>
+
+<p>Fabio Estevam (1):</p>
+<ul>
+  <li>loader: Move non-error message to debug level</li>
+</ul>
+
+<p>Ilia Mirkin (4):</p>
+<ul>
+  <li>nvc0/ir: fix LSB/BFE/BFI implementations</li>
+  <li>nvc0/ir: fix overwriting of offset register with interpolateAtOffset</li>
+  <li>nvc0: increase texture buffer object alignment to 256 for pre-GM107</li>
+  <li>nouveau: when mapping a persistent buffer, synchronize on former xfers</li>
+</ul>
+
+<p>Jason Ekstrand (5):</p>
+<ul>
+  <li>i965/fs: Always provide a default LOD of 0 for TXS and TXL</li>
+  <li>anv/pipeline: Properly handle unset gl_Layer and gl_ViewportIndex</li>
+  <li>anv/blorp: Align vertex buffers to 64B</li>
+  <li>i965/blorp: Align vertex buffers to 64B</li>
+  <li>i965/blorp: Bump the batch space estimate</li>
+</ul>
+
+<p>Jerome Duval (2):</p>
+<ul>
+  <li>haiku: build fixes around debug defines</li>
+  <li>haiku/winsys: fix dt prototype args</li>
+</ul>
+
+<p>Julien Isorce (4):</p>
+<ul>
+  <li>winsys/radeon: check null in radeon_cs_create_fence</li>
+  <li>winsys/radeon: check null return from radeon_cs_create_fence in cs_flush</li>
+  <li>radeon: initialize hole variable before calling container_of</li>
+  <li>radeon_drm_bo: explicitly check return value of drmCommandWriteRead</li>
+</ul>
+
+<p>Kenneth Graunke (4):</p>
+<ul>
+  <li>i965: Document the sad story of the kernel command parser.</li>
+  <li>i965: Set screen-&gt;cmd_parser_version to 0 if we can't write registers.</li>
+  <li>i965: Skip register write detection when possible.</li>
+  <li>i965: Set kernel features before computing max GL version.</li>
+</ul>
+
+<p>Marek Olšák (1):</p>
+<ul>
+  <li>targets: export radeon winsys_create functions to silence LLVM warning</li>
+</ul>
+
+<p>Michal Srb (1):</p>
+<ul>
+  <li>st: Add cubeMapFace parameter to st_finalize_texture.</li>
+</ul>
+
+<p>Thomas Hellstrom (1):</p>
+<ul>
+  <li>gbm/dri: Flush after unmap</li>
+</ul>
+
+
+</div>
+</body>
+</html>

docs/relnotes/17.0.5.html

@@ -0,0 +1,144 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
+<html lang="en">
+<head>
+  <meta http-equiv="content-type" content="text/html; charset=utf-8">
+  <title>Mesa Release Notes</title>
+  <link rel="stylesheet" type="text/css" href="../mesa.css">
+</head>
+<body>
+
+<div class="header">
+  <h1>The Mesa 3D Graphics Library</h1>
+</div>
+
+<iframe src="../contents.html"></iframe>
+<div class="content">
+
+<h1>Mesa 17.0.5 Release Notes / April 28, 2017</h1>
+
+<p>
+Mesa 17.0.5 is a bug fix release which fixes bugs found since the 17.0.4 release.
+</p>
+<p>
+Mesa 17.0.5 implements the OpenGL 4.5 API, but the version reported by
+glGetString(GL_VERSION) or glGetIntegerv(GL_MAJOR_VERSION) /
+glGetIntegerv(GL_MINOR_VERSION) depends on the particular driver being used.
+Some drivers don't support all the features required in OpenGL 4.5.  OpenGL
+4.5 is <strong>only</strong> available if requested at context creation
+because compatibility contexts are not supported.
+</p>
+
+
+<h2>SHA256 checksums</h2>
+<pre>
+7510eee0d0077860b250d30d73305048c2df4ba09ea8fc04e4f3eec7beece301  mesa-17.0.5.tar.gz
+668efa445d2f57a26e5c096b1965a685733a3b57d9c736f9d6460263847f9bfe  mesa-17.0.5.tar.xz
+</pre>
+
+
+<h2>New features</h2>
+<p>None</p>
+
+
+<h2>Bug fixes</h2>
+
+<ul>
+
+<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=97524">Bug 97524</a> - Samplers referring to the same texture unit with different types should raise GL_INVALID_OPERATION</li>
+
+</ul>
+
+
+<h2>Changes</h2>
+
+<p>Andres Gomez (16):</p>
+<ul>
+  <li>cherry-ignore: Add the pci_id into the shader cache UUID</li>
+  <li>cherry-ignore: fix crash if ctx torn down with no rendering</li>
+  <li>cherry-ignore: Fix typos.</li>
+  <li>cherry-ignore: Revert "etnaviv: Cannot render to rb-swapped formats"</li>
+  <li>cherry-ignore: Revert "i965/fs: Don't emit SEL instructions for type-converting MOVs."</li>
+  <li>cherry-ignore: fix typo in a2b10g10r10 fast clear calculation</li>
+  <li>cherry-ignore: remove unused anv_dispatch_table dtable</li>
+  <li>cherry-ignore: remove unused radv_dispatch_table dtable</li>
+  <li>cherry-ignore: make radv_resolve_entrypoint static</li>
+  <li>cherry-ignore: vulkan: add support for libmesa_vulkan_util</li>
+  <li>cherry-ignore: r600: fix libmesa_amd_common dependency</li>
+  <li>cherry-ignore: remove dead brw_new_shader() declaration</li>
+  <li>cherry-ignore: remove i965_symbols_test reference from .gitignore</li>
+  <li>cherry-ignore: automake: ensure that the destination directory is created</li>
+  <li>cherry-ignore: provide required gem stubs for the tests</li>
+  <li>Update version to 17.0.5</li>
+</ul>
+
+<p>Boyan Ding (2):</p>
+<ul>
+  <li>nvc0/ir: Properly handle a "split form" of predicate destination</li>
+  <li>nir: Destination component count of shader_clock intrinsic is 2</li>
+</ul>
+
+<p>Emil Velikov (5):</p>
+<ul>
+  <li>docs: add sha256 checksums for 17.0.4</li>
+  <li>winsys/sw/dri: don't use GNU void pointer arithmetic</li>
+  <li>st/clover: add space between &lt; and ::</li>
+  <li>configure.ac: check require_basic_egl only if egl enabled</li>
+  <li>st/mesa: automake: honour the vdpau header install location</li>
+</ul>
+
+<p>Francisco Jerez (2):</p>
+<ul>
+  <li>intel/fs: Use regs_written() in spilling cost heuristic for improved accuracy.</li>
+  <li>intel/fs: Take into account amount of data read in spilling cost heuristic.</li>
+</ul>
+
+<p>Grazvydas Ignotas (1):</p>
+<ul>
+  <li>radv: report timestampPeriod correctly</li>
+</ul>
+
+<p>Jason Ekstrand (5):</p>
+<ul>
+  <li>anv/blorp: Flush the texture cache in UpdateBuffer</li>
+  <li>anv/cmd_buffer: Flush the VF cache at the top of all primaries</li>
+  <li>anv/cmd_buffer: Always set up a null surface state</li>
+  <li>anv/cmd_buffer: Use the null surface state for ATTACHMENT_UNUSED</li>
+  <li>anv/blorp: Properly handle VK_ATTACHMENT_UNUSED</li>
+</ul>
+
+<p>Kenneth Graunke (1):</p>
+<ul>
+  <li>i965/vec4: Avoid reswizzling MACH instructions in opt_register_coalesce().</li>
+</ul>
+
+<p>Marek Olšák (1):</p>
+<ul>
+  <li>st/mesa: invalidate the readpix cache in st_indirect_draw_vbo</li>
+</ul>
+
+<p>Nanley Chery (1):</p>
+<ul>
+  <li>anv/cmd_buffer: Disable CCS on BDW input attachments</li>
+</ul>
+
+<p>Nicolai Hähnle (4):</p>
+<ul>
+  <li>mesa: fix remaining xfb prims check for GLES with multiple instances</li>
+  <li>mesa: extract need_xfb_remaining_prims_check</li>
+  <li>mesa: move glMultiDrawArrays to vbo and fix error handling</li>
+  <li>vbo: fix gl_DrawID handling in glMultiDrawArrays</li>
+</ul>
+
+<p>Rob Clark (1):</p>
+<ul>
+  <li>util/queue: don't hang at exit</li>
+</ul>
+
+<p>Timothy Arceri (1):</p>
+<ul>
+  <li>mesa: validate sampler type across the whole program</li>
+</ul>
+
+</div>
+</body>
+</html>

docs/relnotes/17.0.6.html

@@ -0,0 +1,186 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
+<html lang="en">
+<head>
+  <meta http-equiv="content-type" content="text/html; charset=utf-8">
+  <title>Mesa Release Notes</title>
+  <link rel="stylesheet" type="text/css" href="../mesa.css">
+</head>
+<body>
+
+<div class="header">
+  <h1>The Mesa 3D Graphics Library</h1>
+</div>
+
+<iframe src="../contents.html"></iframe>
+<div class="content">
+
+<h1>Mesa 17.0.6 Release Notes / May 12, 2017</h1>
+
+<p>
+Mesa 17.0.6 is a bug fix release which fixes bugs found since the 17.0.5 release.
+</p>
+<p>
+Mesa 17.0.6 implements the OpenGL 4.5 API, but the version reported by
+glGetString(GL_VERSION) or glGetIntegerv(GL_MAJOR_VERSION) /
+glGetIntegerv(GL_MINOR_VERSION) depends on the particular driver being used.
+Some drivers don't support all the features required in OpenGL 4.5.  OpenGL
+4.5 is <strong>only</strong> available if requested at context creation
+because compatibility contexts are not supported.
+</p>
+
+
+<h2>SHA256 checksums</h2>
+<pre>
+f1b2497d553e9a584f0caa3a2d9d310e27ead15fb0af170da69f6e70fb5031cd  mesa-17.0.6.tar.gz
+89ecf3bcd0f18dcca5aaa42bf36bb52a2df33be89889f94aaaad91f7a504a69d  mesa-17.0.6.tar.xz
+</pre>
+
+
+<h2>New features</h2>
+<p>None</p>
+
+
+<h2>Bug fixes</h2>
+
+<ul>
+
+<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=98428">Bug 98428</a> - Undefined non-weak-symbol in dri-drivers</li>
+
+<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100854">Bug 100854</a> - YUV to RGB Color Space Conversion result is not precise</li>
+
+</ul>
+
+
+<h2>Changes</h2>
+
+<p>Adam Jackson (1):</p>
+<ul>
+  <li>egl/platform/drm: Don't take display ownership until gbm is initialized</li>
+</ul>
+
+<p>Andres Gomez (7):</p>
+<ul>
+  <li>docs: add sha256 checksums for 17.0.5</li>
+  <li>travis: replace Trusty-based LLVM toolchain apt-get with apt addon</li>
+  <li>travis: add the possibility of using the txc-dxtn library</li>
+  <li>cherry-ignore: 17.1 nominations only</li>
+  <li>cherry-ignore: fix regression in descriptor set freeing.</li>
+  <li>cherry-ignore: rejected commits</li>
+  <li>Update version to 17.0.6</li>
+</ul>
+
+<p>Ben Boeckel (1):</p>
+<ul>
+  <li>scons: update for LLVM 4.0</li>
+</ul>
+
+<p>Brian Paul (1):</p>
+<ul>
+  <li>st/mesa: move duplicated st_ws_framebuffer() function into header file</li>
+</ul>
+
+<p>Chad Versace (3):</p>
+<ul>
+  <li>egl: Emit error when EGLSurface is lost</li>
+  <li>egl/android: Cancel any outstanding ANativeBuffer in surface destructor</li>
+  <li>egl/android: Mark surface as lost when dequeueBuffer fails</li>
+</ul>
+
+<p>Christian Gmeiner (1):</p>
+<ul>
+  <li>etnaviv: add L8A8_UNORM texture format</li>
+</ul>
+
+<p>Dave Airlie (2):</p>
+<ul>
+  <li>radv/wsi: report presentation error per image request</li>
+  <li>radv: enable POLARIS12 support.</li>
+</ul>
+
+<p>Emil Velikov (21):</p>
+<ul>
+  <li>travis: correct libdrm required regex to also track libdrm itself</li>
+  <li>travis: add nearly all gallium drivers to the list</li>
+  <li>travis: use both cores for make/make check</li>
+  <li>travis: bring the scons build on par with AppVeyor</li>
+  <li>travis: explicitly LD_LIBRARY_PATH the local libraries</li>
+  <li>travis: enable apt cache</li>
+  <li>travis: automatically manage ccache caching</li>
+  <li>travis: remove unused -dev packages</li>
+  <li>travis: rework "if test" blocks in the script section</li>
+  <li>travis: split out matrix from env</li>
+  <li>travis: add separate "scons" and "scons llvm" targets</li>
+  <li>travis: add "scons swr" to the build matrix</li>
+  <li>travis: add "make swr" to the build matrix</li>
+  <li>travis: split the make target to three separate ones</li>
+  <li>travis: model scons check target like the make one</li>
+  <li>travis: add Gallium state-tracker targets</li>
+  <li>travis: enable wayland support</li>
+  <li>travis: bump MAKEFLAGS to -j4</li>
+  <li>gallium/dri: always link against shared glapi</li>
+  <li>mesa/dri: always link against shared glapi</li>
+  <li>glx: glX_proto_send.py: use correct compile guard GLX_INDIRECT_RENDERING</li>
+</ul>
+
+<p>Eric Anholt (1):</p>
+<ul>
+  <li>nir: Pick just the channels we want for bitmap and drawpixels lowering.</li>
+</ul>
+
+<p>Ilia Mirkin (1):</p>
+<ul>
+  <li>gallium/targets: fix bool setting on BE architectures</li>
+</ul>
+
+<p>Jason Ekstrand (1):</p>
+<ul>
+  <li>anv/cmd_buffer: Use the device allocator for QueueSubmit</li>
+</ul>
+
+<p>Johnson Lin (1):</p>
+<ul>
+  <li>nir/lower_tex: Fix minor error in YUV color conversion matrix</li>
+</ul>
+
+<p>Marek Olšák (2):</p>
+<ul>
+  <li>radeonsi: adjust ESGS ring buffer size computation on VI</li>
+  <li>radeonsi: apply the tess+GS hang workaround to Polaris12 as well</li>
+</ul>
+
+<p>Nicolai Hähnle (1):</p>
+<ul>
+  <li>radeonsi: fix gl_PrimitiveID in tessellation with instanced draws on SI</li>
+</ul>
+
+<p>Philipp Zabel (3):</p>
+<ul>
+  <li>renderonly: close transfer prime_fd</li>
+  <li>renderonly: drop resources on destroy</li>
+  <li>renderonly: use drmIoctl</li>
+</ul>
+
+<p>Rhys Kidd (3):</p>
+<ul>
+  <li>travis: Support LLVM 3.8+ on Trusty-based Travis-CI via apt-get not apt addon</li>
+  <li>travis: Add radv vulkan driver to continuous integration</li>
+  <li>travis: Add radeonsi to continuous integration</li>
+</ul>
+
+<p>Rob Clark (1):</p>
+<ul>
+  <li>freedreno/a3xx: fix hang w/ large render targets and small gmem</li>
+</ul>
+
+<p>Samuel Iglesias Gonsálvez (5):</p>
+<ul>
+  <li>i965/vec4: fix vertical stride to avoid breaking region parameter rule</li>
+  <li>i965/vec4: fix register width for DF VGRF and UNIFORM</li>
+  <li>i965/vec4: don't modify regioning parameters to the sources of DF align1 instructions</li>
+  <li>anv: anv_gem_mmap() returns MAP_FAILED as mapping error</li>
+  <li>anv: vkBindImageMemory() should return VK_ERROR_OUT_OF_{HOST,DEVICE}_MEMORY on failure</li>
+</ul>
+
+</div>
+</body>
+</html>

docs/relnotes/17.0.7.html

@@ -0,0 +1,145 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
+<html lang="en">
+<head>
+  <meta http-equiv="content-type" content="text/html; charset=utf-8">
+  <title>Mesa Release Notes</title>
+  <link rel="stylesheet" type="text/css" href="../mesa.css">
+</head>
+<body>
+
+<div class="header">
+  <h1>The Mesa 3D Graphics Library</h1>
+</div>
+
+<iframe src="../contents.html"></iframe>
+<div class="content">
+
+<h1>Mesa 17.0.7 Release Notes / June 1, 2017</h1>
+
+<p>
+Mesa 17.0.7 is a bug fix release which fixes bugs found since the 17.0.6 release.
+</p>
+<p>
+Mesa 17.0.7 implements the OpenGL 4.5 API, but the version reported by
+glGetString(GL_VERSION) or glGetIntegerv(GL_MAJOR_VERSION) /
+glGetIntegerv(GL_MINOR_VERSION) depends on the particular driver being used.
+Some drivers don't support all the features required in OpenGL 4.5.  OpenGL
+4.5 is <strong>only</strong> available if requested at context creation
+because compatibility contexts are not supported.
+</p>
+
+
+<h2>SHA256 checksums</h2>
+<pre>
+bc68d13c6b1a053b855ac453ebf7e62bd89511adf44bad6c613e09f7fa13390a  mesa-17.0.7.tar.gz
+f6d75304a229c8d10443e219d6b6c0c342567dbab5a879ebe7cfa3c9139c4492  mesa-17.0.7.tar.xz
+</pre>
+
+
+<h2>New features</h2>
+<p>None</p>
+
+
+<h2>Bug fixes</h2>
+
+<ul>
+
+<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=98833">Bug 98833</a> - [REGRESSION, bisected] Wayland revert commit breaks non-Vsync fullscreen frame updates</li>
+
+<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100741">Bug 100741</a> - Chromium - Memory leak</li>
+
+<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100925">Bug 100925</a> - [HSW/BSW/BDW/SKL] Google Earth is not resolving all the details in the map correctly</li>
+
+</ul>
+
+
+<h2>Changes</h2>
+
+<p>Andres Gomez (1):</p>
+<ul>
+  <li>docs: add sha256 checksums for 17.0.6</li>
+</ul>
+
+<p>Bartosz Tomczyk (1):</p>
+<ul>
+  <li>mesa: Avoid leaking surface in st_renderbuffer_delete</li>
+</ul>
+
+<p>Chad Versace (1):</p>
+<ul>
+  <li>egl: Partially revert 23c86c74, fix eglMakeCurrent</li>
+</ul>
+
+<p>Daniel Stone (7):</p>
+<ul>
+  <li>vulkan: Fix Wayland uninitialised registry</li>
+  <li>vulkan/wsi/wayland: Remove roundtrip when creating image</li>
+  <li>vulkan/wsi/wayland: Use per-display event queue</li>
+  <li>vulkan/wsi/wayland: Use proxy wrappers for swapchain</li>
+  <li>egl/wayland: Don't open-code roundtrip</li>
+  <li>egl/wayland: Use per-surface event queues</li>
+  <li>egl/wayland: Ensure we get a back buffer</li>
+</ul>
+
+<p>Emil Velikov (5):</p>
+<ul>
+  <li>st/va: fix misplaced closing bracket</li>
+  <li>anv: automake: list shared libraries after the static ones</li>
+  <li>radv: automake: list shared libraries after the static ones</li>
+  <li>egl/wayland: select the format based on the interface used</li>
+  <li>Update version to 17.0.7</li>
+</ul>
+
+<p>Eric Anholt (2):</p>
+<ul>
+  <li>renderonly: Initialize fields of struct winsys_handle.</li>
+  <li>vc4: Don't allocate new BOs to avoid synchronization when they're shared.</li>
+</ul>
+
+<p>Hans de Goede (1):</p>
+<ul>
+  <li>glxglvnddispatch: Add missing dispatch for GetDriverConfig</li>
+</ul>
+
+<p>Ilia Mirkin (1):</p>
+<ul>
+  <li>nvc0/ir: SHLADD's middle source must be an immediate</li>
+</ul>
+
+<p>Jason Ekstrand (2):</p>
+<ul>
+  <li>i965/blorp: Do and end-of-pipe sync on both sides of fast-clear ops</li>
+  <li>i965: Round copy size to the nearest block in intel_miptree_copy</li>
+</ul>
+
+<p>Lucas Stach (1):</p>
+<ul>
+  <li>etnaviv: stop oversizing buffer resources</li>
+</ul>
+
+<p>Nanley Chery (2):</p>
+<ul>
+  <li>anv/formats: Update the three-channel BC1 mappings</li>
+  <li>i965/formats: Update the three-channel DXT1 mappings</li>
+</ul>
+
+<p>Pohjolainen, Topi (1):</p>
+<ul>
+  <li>intel/isl/gen7: Use stencil vertical alignment of 8 instead of 4</li>
+</ul>
+
+<p>Samuel Iglesias Gonsálvez (3):</p>
+<ul>
+  <li>i965/vec4/gs: restore the uniform values which was overwritten by failed vec4_gs_visitor execution</li>
+  <li>i965/vec4: fix swizzle and writemask when loading an uniform with constant offset</li>
+  <li>i965/vec4: load dvec3/4 uniforms first in the push constant buffer</li>
+</ul>
+
+<p>Tom Stellard (1):</p>
+<ul>
+  <li>gallivm: Make sure module has the correct data layout when pass manager runs</li>
+</ul>
+
+</div>
+</body>
+</html>

docs/relnotes/17.1.0.html

@@ -1,223 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
-<html lang="en">
-<head>
-  <meta http-equiv="content-type" content="text/html; charset=utf-8">
-  <title>Mesa Release Notes</title>
-  <link rel="stylesheet" type="text/css" href="../mesa.css">
-</head>
-<body>
-
-<div class="header">
-  <h1>The Mesa 3D Graphics Library</h1>
-</div>
-
-<iframe src="../contents.html"></iframe>
-<div class="content">
-
-<h1>Mesa 17.1.0 Release Notes / May 10, 2017</h1>
-
-<p>
-Mesa 17.1.0 is a new development release.
-People who are concerned with stability and reliability should stick
-with a previous release or wait for Mesa 17.1.1.
-</p>
-<p>
-Mesa 17.1.0 implements the OpenGL 4.5 API, but the version reported by
-glGetString(GL_VERSION) or glGetIntegerv(GL_MAJOR_VERSION) /
-glGetIntegerv(GL_MINOR_VERSION) depends on the particular driver being used.
-Some drivers don't support all the features required in OpenGL 4.5.  OpenGL
-4.5 is <strong>only</strong> available if requested at context creation
-because compatibility contexts are not supported.
-</p>
-
-
-<h2>SHA256 checksums</h2>
-<pre>
-c388069581a72853161657ac365f2c083afabd7cffd53f80513dacfa1cfa58a8  mesa-17.1.0.tar.gz
-cf234a6ed4764673886b6661553b54675776ef0898f774716173cec890ac3b17  mesa-17.1.0.tar.xz
-</pre>
-
-
-<h2>New features</h2>
-
-<p>
-Note: some of the new features are only available with certain drivers.
-</p>
-
-<ul>
-<li>OpenGL 4.2 on i965/ivb</li>
-<li>GL_ARB_gpu_shader_fp64 on i965/ivybridge</li>
-<li>GL_ARB_gpu_shader_int64 on i965/gen8+, nvc0, radeonsi, softpipe, llvmpipe</li>
-<li>GL_ARB_shader_ballot on nvc0, radeonsi</li>
-<li>GL_ARB_shader_clock on nv50, nvc0, radeonsi</li>
-<li>GL_ARB_shader_group_vote on radeonsi</li>
-<li>GL_ARB_shader_precision on i965/ivb</li>
-<li>GL_ARB_shader_viewport_layer_array on radeonsi</li>
-<li>GL_ARB_sparse_buffer on radeonsi/CIK+</li>
-<li>GL_ARB_transform_feedback2 on i965/gen6</li>
-<li>GL_ARB_transform_feedback_overflow_query on i965/gen6+</li>
-<li>GL_ARB_vertex_attrib_64bit on i965/ivb</li>
-<li>GL_NV_fill_rectangle on nvc0</li>
-<li>Geometry shaders enabled on swr</li>
-</ul>
-
-<h2>Bug fixes</h2>
-
-<ul>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=68504">Bug 68504</a> - 9.2-rc1 workaround for clover build failure on ppc/altivec: cannot convert 'bool' to '__vector(4) __bool int' in return</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=84325">Bug 84325</a> - X.Org segfaults when starting DE on an Intel+Radeon laptop, caused by libpciaccess cleanup, patch attached</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=93089">Bug 93089</a> - mesa fails to check for gcc atomic primitives before using them</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=95460">Bug 95460</a> - Please add more drivers (freedreno, virgl) to features.txt status document</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=96743">Bug 96743</a> - [BYT, HSW, SKL, BXT, KBL] GPU hangs with GfxBench 4.0 CarChase</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=97102">Bug 97102</a> - [dri][swr] stack overflow / infinite loop with GALLIUM_DRIVER=swr</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=97338">Bug 97338</a> - Black squares in the Spec Ops: The Line chapter select screen</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=97524">Bug 97524</a> - Samplers referring to the same texture unit with different types should raise GL_INVALID_OPERATION</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=97967">Bug 97967</a> - glsl/tests/cache-test regression</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=97988">Bug 97988</a> - [radeonsi] playing back videos with VDPAU exhibits deinterlacing/anti-aliasing issues not visible with VA-API</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=98263">Bug 98263</a> - [radv] The Talos Principle fails to launch with &quot;Fatal error: Cannot set display mode.&quot;</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=98428">Bug 98428</a> - Undefined non-weak-symbol in dri-drivers</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=98502">Bug 98502</a> - Delay when starting firefox, thunderbird or chromium and dmesg spam</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=98869">Bug 98869</a> - Electronic Super Joy graphic artefacts (regression,bisected)</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=98975">Bug 98975</a> - Wasteland 2 Directors Cut: Hangs. GPU fault</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99010">Bug 99010</a> - --disable-gallium-llvm no longer recognized</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99246">Bug 99246</a> - [d3dadapter+radeonsi &amp; bisect] EVE-Online : hang on wormhole sight</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99265">Bug 99265</a> - i965: Piglit egl_khr_gl_renderbuffer_image-clear-shared-image fails</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99339">Bug 99339</a> - Blender line rendering broken after removing XY clipping of lines</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99401">Bug 99401</a> - [g33] regression: piglit.spec.!opengl 1_0.gl-1_0-beginend-coverage</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99450">Bug 99450</a> - [amdgpu] Payday 2 visual glitches on some models</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99451">Bug 99451</a> - polygon offset use after free</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99456">Bug 99456</a> - Firefox crashing when opening about:support with WebGL2 enabled</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99465">Bug 99465</a> - vtn_vector_construct writing out of bounds when given multiple non-zero length sources</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99484">Bug 99484</a> - Crusader Kings 2 - Loading bars, siege bars, morale bars, etc. do not render correctly</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99532">Bug 99532</a> - Compute shader doesn't give right result under some circumstances</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99542">Bug 99542</a> - vdpau  logging errors since gallium/radeon: adjust the rule for using the LINEAR_ALIGNED layout</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99631">Bug 99631</a> - segfault with OSVRTrackerView and openscenegraph git master</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99633">Bug 99633</a> - rasterizer/core/clip.h:279:49: error: ‘const struct API_STATE’ has no member named ‘linkageCount’</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99660">Bug 99660</a> - Not all of the int64 conversion opcodes got implemented</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99677">Bug 99677</a> - heap-use-after-free in glsl</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99692">Bug 99692</a> - [radv] Mostly broken on Hawaii PRO/CIK ASICs</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99701">Bug 99701</a> - loader.c:353:8: error: implicit declaration of function 'geteuid' is invalid in C99 [-Werror,-Wimplicit-function-declaration]</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99715">Bug 99715</a> - Don't print: &quot;Note: Buggy applications may crash, if they do please report to vendor&quot;</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99789">Bug 99789</a> - Memory leak on failure to create an ir_constant in calculate_iterations in loop_controls.cpp</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99817">Bug 99817</a> - [softpipe] piglit glsl-fs-tan-1 regression</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99842">Bug 99842</a> - GL_ARB_transform_feedback2 on i965 gen6</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99850">Bug 99850</a> - Tessellation bug on Carrizo</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99918">Bug 99918</a> - disk_cache.h:57:20: error: no member named 'st_mtim' in 'struct stat'</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99953">Bug 99953</a> - device9.c:122:49: error: ‘PIPE_CAP_USER_INDEX_BUFFERS’ undeclared (first use in this function)</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=99955">Bug 99955</a> - [r600g] GPU load always displayed at 100% with GALLIUM_HUD=GPU-load</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100026">Bug 100026</a> - piglit.spec.arb_shader_subroutine.compiler.direct-call_vert regression</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100049">Bug 100049</a> - &quot;ralloc: Make sure ralloc() allocations match malloc()'s alignment.&quot; causes seg fault in 32bit build</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100060">Bug 100060</a> - wsi/wsi_common_wayland.c:25:41: fatal error: wayland-drm-client-protocol.h: No such file or directory</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100061">Bug 100061</a> - LODQ instruction generated with invalid dst mask</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100068">Bug 100068</a> - LLVM ERROR: Cannot select: intrinsic %llvm.amdgcn.buffer.load.format</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100088">Bug 100088</a> - piglit.spec.arb_get_texture_sub_image.arb_get_texture_sub_image regressions</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100091">Bug 100091</a> - Failure to create folder for on-disk shader cache</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100133">Bug 100133</a> - swr_context.cpp:336:44: error: invalid conversion from ‘uint {aka unsigned int}’ to ‘pipe_render_cond_flag’ [-fpermissive]</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100154">Bug 100154</a> - test_eu_compact regression</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100180">Bug 100180</a> - Build failure in GNOME Continuous</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100182">Bug 100182</a> - Flickering in The Talos Principle on Sky Lake GT4.</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100201">Bug 100201</a> - Windows scons build with MSVC toolchain and LLVM 4.0 fails</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100223">Bug 100223</a> - marshal_generated.c:38:10: fatal error: 'X11/Xlib-xcb.h' file not found</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100236">Bug 100236</a> - Undefined symbols for architecture x86_64: &quot;typeinfo for llvm::RTDyldMemoryManager&quot;</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100259">Bug 100259</a> - [EGL] [GBM] undefined reference to `gbm_bo_create_with_modifiers'</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100288">Bug 100288</a> - clover unable to run OpenCL kernels since 03127bb radeonsi: compile all TGSI compute shaders asynchronously</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100303">Bug 100303</a> - Adding a single, meaningless if-else to a shader source leads to different image</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100391">Bug 100391</a> - SachaWillems deferredmultisampling asserts</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100452">Bug 100452</a> - push_constants host memory leak when resetting command buffer</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100531">Bug 100531</a> - [regression] Broken graphics in several games</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100562">Bug 100562</a> - u_debug_stack.c:59: undefined reference to `_Ux86_64_getcontext'</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100569">Bug 100569</a> - core/resource.cpp:36:33: error: non-constant-expression cannot be narrowed from type 'int' to 'int16_t' (aka 'short') in initializer list [-Wc++11-narrowing]</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100574">Bug 100574</a> - anv_device.c:189: undefined reference to `anv_gem_supports_48b_addresses'</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100582">Bug 100582</a> - [GEN8+] piglit.spec.arb_stencil_texturing.glblitframebuffer corrupts state.gl_texture* assertions</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100600">Bug 100600</a> - anv_device.c:1337: undefined reference to `anv_gem_busy'</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100620">Bug 100620</a> - [SKL] 48-bit addresses break DOOM</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100663">Bug 100663</a> - commit 61e47d92c5196 breaks RS780</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100690">Bug 100690</a> - [Regression, bisected] TotalWar: Warhammer corrupted graphics</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100892">Bug 100892</a> - Polaris 12: winsys init bad switch (missing break) initializing addrlib</li>
-
-</ul>
-
-<h2>Changes</h2>
-
-<ul>
-<li>Removed the ilo gallium driver.</li>
-<li>The configure option --enable-gallium-llvm is superseded by --enable-llvm.</li>
-<li>The swr driver now requires LLVM &gt;= 3.9.0 and a C++14 capable compiler.</li>
-<li>The radeonsi driver now requires LLVM 3.8.0.</li>
-<li>The MESA_GLSL=opt and MESA_GLSL=no_opt environment vars have been removed.</li>
-<li>The --with-egl-platforms configure option is deprecated. Use --with-platforms instead.</li>
-</ul>
-
-</div>
-</body>
-</html>

docs/relnotes/17.1.1.html

@@ -1,188 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
-<html lang="en">
-<head>
-  <meta http-equiv="content-type" content="text/html; charset=utf-8">
-  <title>Mesa Release Notes</title>
-  <link rel="stylesheet" type="text/css" href="../mesa.css">
-</head>
-<body>
-
-<div class="header">
-  <h1>The Mesa 3D Graphics Library</h1>
-</div>
-
-<iframe src="../contents.html"></iframe>
-<div class="content">
-
-<h1>Mesa 17.1.1 Release Notes / March 25, 2017</h1>
-
-<p>
-Mesa 17.1.1 is a bug fix release which fixes bugs found since the 17.1.0 release.
-</p>
-<p>
-Mesa 17.1.1 implements the OpenGL 4.5 API, but the version reported by
-glGetString(GL_VERSION) or glGetIntegerv(GL_MAJOR_VERSION) /
-glGetIntegerv(GL_MINOR_VERSION) depends on the particular driver being used.
-Some drivers don't support all the features required in OpenGL 4.5.  OpenGL
-4.5 is <strong>only</strong> available if requested at context creation
-because compatibility contexts are not supported.
-</p>
-
-
-<h2>SHA256 checksums</h2>
-<pre>
-652315af87f2bb015ce99ee3b90d9d115d53cbf9e052493bd13d521a753b1930  mesa-17.1.1.tar.gz
-aed503f94c0c1630a162a3e276f4ee12a86764cee4cb92338ea2dea99a04e7ef  mesa-17.1.1.tar.xz
-</pre>
-
-
-<h2>New features</h2>
-<p>None</p>
-
-
-<h2>Bug fixes</h2>
-
-<ul>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100854">Bug 100854</a> - YUV to RGB Color Space Conversion result is not precise</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100925">Bug 100925</a> - [HSW/BSW/BDW/SKL] Google Earth is not resolving all the details in the map correctly</li>
-
-</ul>
-
-
-<h2>Changes</h2>
-
-<p>Alex Deucher (1):</p>
-<ul>
-  <li>radeonsi: add new vega10 pci ids</li>
-</ul>
-
-<p>Andres Gomez (2):</p>
-<ul>
-  <li>bin/get-fixes-pick-list.sh: don't warn if more than one, go over them</li>
-  <li>bin/get-fixes-pick-list.sh: bring back the warning</li>
-</ul>
-
-<p>Bruce Cherniak (1):</p>
-<ul>
-  <li>swr: move msaa resolve to generalized StoreTile</li>
-</ul>
-
-<p>Chad Versace (1):</p>
-<ul>
-  <li>egl: Partially revert 23c86c74, fix eglMakeCurrent</li>
-</ul>
-
-<p>Chih-Wei Huang (1):</p>
-<ul>
-  <li>Android: correct libz dependency</li>
-</ul>
-
-<p>Daniel Stone (1):</p>
-<ul>
-  <li>gbm/dri: Fix sign-extension in modifier query</li>
-</ul>
-
-<p>Emil Velikov (6):</p>
-<ul>
-  <li>docs: add sha256 checksums for 17.1.0</li>
-  <li>radeon: automake: remove unneeded elf Cflags/Libs</li>
-  <li>configure: remove unneeded bits around libunwind handling</li>
-  <li>egl: add g_egldispatchstubs.h to the release tarball</li>
-  <li>automake: add SWR LLVM gen_builder.hpp workaround</li>
-  <li>Update version to 17.1.1</li>
-</ul>
-
-<p>Eric Anholt (2):</p>
-<ul>
-  <li>renderonly: Initialize fields of struct winsys_handle.</li>
-  <li>vc4: Don't allocate new BOs to avoid synchronization when they're shared.</li>
-</ul>
-
-<p>Grazvydas Ignotas (2):</p>
-<ul>
-  <li>anv: fix possible stack corruption</li>
-  <li>anv: don't leak DRM devices</li>
-</ul>
-
-<p>Hans de Goede (1):</p>
-<ul>
-  <li>glxglvnddispatch: Add missing dispatch for GetDriverConfig</li>
-</ul>
-
-<p>Ilia Mirkin (1):</p>
-<ul>
-  <li>nvc0/ir: SHLADD's middle source must be an immediate</li>
-</ul>
-
-<p>Johnson Lin (1):</p>
-<ul>
-  <li>nir/lower_tex: Fix minor error in YUV color conversion matrix</li>
-</ul>
-
-<p>Juan A. Suarez Romero (2):</p>
-<ul>
-  <li>bin/get-{extra,fixes}-pick-list.sh: add support for ignore list</li>
-  <li>bin/get-{extra,fixes}-pick-list.sh: improve output</li>
-</ul>
-
-<p>Lucas Stach (2):</p>
-<ul>
-  <li>etnaviv: stop oversizing buffer resources</li>
-  <li>etnaviv: allow R/B swapped surfaces to be cleared</li>
-</ul>
-
-<p>Marek Olšák (2):</p>
-<ul>
-  <li>amd/addrlib: import Raven support</li>
-  <li>radeonsi/gfx9: add support for Raven</li>
-</ul>
-
-<p>Nanley Chery (2):</p>
-<ul>
-  <li>anv/formats: Update the three-channel BC1 mappings</li>
-  <li>i965/formats: Update the three-channel DXT1 mappings</li>
-</ul>
-
-<p>Nicolai Hähnle (5):</p>
-<ul>
-  <li>radeonsi: mark fast-cleared textures as compressed when dirtying</li>
-  <li>radeonsi: fix primitive ID in fragment shader when using tessellation</li>
-  <li>radeonsi: fix gl_PrimitiveID in tessellation with instanced draws on SI</li>
-  <li>radeonsi: fix gl_PrimitiveIDIn in geometry shader when using tessellation</li>
-  <li>st/mesa: remove an incorrect assertion</li>
-</ul>
-
-<p>Pohjolainen, Topi (1):</p>
-<ul>
-  <li>intel/isl/gen7: Use stencil vertical alignment of 8 instead of 4</li>
-</ul>
-
-<p>Rob Clark (2):</p>
-<ul>
-  <li>mesa/st: fix yuv EGLImage's</li>
-  <li>freedreno: fix crash when flush() but no rendering</li>
-</ul>
-
-<p>Rob Herring (1):</p>
-<ul>
-  <li>virgl: fix virgl_bo_transfer_{put, get} box struct copy</li>
-</ul>
-
-<p>Samuel Iglesias Gonsálvez (3):</p>
-<ul>
-  <li>i965/vec4/gs: restore the uniform values which was overwritten by failed vec4_gs_visitor execution</li>
-  <li>i965/vec4: fix swizzle and writemask when loading an uniform with constant offset</li>
-  <li>i965/vec4: load dvec3/4 uniforms first in the push constant buffer</li>
-</ul>
-
-<p>Tom Stellard (1):</p>
-<ul>
-  <li>gallivm: Make sure module has the correct data layout when pass manager runs</li>
-</ul>
-
-
-</div>
-</body>
-</html>

docs/relnotes/17.1.2.html

@@ -1,186 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
-<html lang="en">
-<head>
-  <meta http-equiv="content-type" content="text/html; charset=utf-8">
-  <title>Mesa Release Notes</title>
-  <link rel="stylesheet" type="text/css" href="../mesa.css">
-</head>
-<body>
-
-<div class="header">
-  <h1>The Mesa 3D Graphics Library</h1>
-</div>
-
-<iframe src="../contents.html"></iframe>
-<div class="content">
-
-<h1>Mesa 17.1.2 Release Notes / June 5, 2017</h1>
-
-<p>
-Mesa 17.1.2 is a bug fix release which fixes bugs found since the 17.1.1 release.
-</p>
-<p>
-Mesa 17.1.2 implements the OpenGL 4.5 API, but the version reported by
-glGetString(GL_VERSION) or glGetIntegerv(GL_MAJOR_VERSION) /
-glGetIntegerv(GL_MINOR_VERSION) depends on the particular driver being used.
-Some drivers don't support all the features required in OpenGL 4.5.  OpenGL
-4.5 is <strong>only</strong> available if requested at context creation
-because compatibility contexts are not supported.
-</p>
-
-
-<h2>SHA256 checksums</h2>
-<pre>
-TBD
-</pre>
-
-
-<h2>New features</h2>
-<p>None</p>
-
-
-<h2>Bug fixes</h2>
-
-<ul>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=98833">Bug 98833</a> - [REGRESSION, bisected] Wayland revert commit breaks non-Vsync fullscreen frame updates</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100741">Bug 100741</a> - Chromium - Memory leak</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=100877">Bug 100877</a> - vulkan/tests/block_pool_no_free regression</li>
-
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=101110">Bug 101110</a> - Build failure in GNOME Continuous</li>
-
-</ul>
-
-
-<h2>Changes</h2>
-
-<p>Bartosz Tomczyk (1):</p>
-<ul>
-  <li>mesa: Avoid leaking surface in st_renderbuffer_delete</li>
-</ul>
-
-<p>Bas Nieuwenhuizen (1):</p>
-<ul>
-  <li>radv: Reserve space for descriptor and push constant user SGPR setting.</li>
-</ul>
-
-<p>Daniel Stone (7):</p>
-<ul>
-  <li>vulkan: Fix Wayland uninitialised registry</li>
-  <li>vulkan/wsi/wayland: Remove roundtrip when creating image</li>
-  <li>vulkan/wsi/wayland: Use per-display event queue</li>
-  <li>vulkan/wsi/wayland: Use proxy wrappers for swapchain</li>
-  <li>egl/wayland: Don't open-code roundtrip</li>
-  <li>egl/wayland: Use per-surface event queues</li>
-  <li>egl/wayland: Ensure we get a back buffer</li>
-</ul>
-
-<p>Emil Velikov (24):</p>
-<ul>
-  <li>docs: add sha256 checksums for 17.1.1</li>
-  <li>configure: move platform handling further up</li>
-  <li>configure: rename remaining HAVE_EGL_PLATFORM_* guards</li>
-  <li>configure: update remaining --with-egl-platforms references</li>
-  <li>configure: loosen --with-platforms heuristics</li>
-  <li>configure: enable the surfaceless platform by default</li>
-  <li>configure: set HAVE_foo_PLATFORM as applicable</li>
-  <li>configure: error out when building GLX w/o the X11 platform</li>
-  <li>configure: check once for DRI3 dependencies</li>
-  <li>loader: build libloader_dri3_helper.la only with HAVE_PLATFORM_X11</li>
-  <li>configure: error out when building X11 Vulkan without DRI3</li>
-  <li>auxiliary/vl: use vl_*_screen_create stubs when building w/o platform</li>
-  <li>st/va: fix misplaced closing bracket</li>
-  <li>st/omx: remove unneeded X11 include</li>
-  <li>st/omx: fix building against X11-less setups</li>
-  <li>gallium/targets: link against XCB only as needed</li>
-  <li>configure: error out if building VA w/o supported platform</li>
-  <li>configure: error out if building OMX w/o supported platform</li>
-  <li>configure: error out if building VDPAU w/o supported platform</li>
-  <li>configure: error out if building XVMC w/o supported platform</li>
-  <li>travis: remove workarounds for the Vulkan target</li>
-  <li>anv: automake: list shared libraries after the static ones</li>
-  <li>radv: automake: list shared libraries after the static ones</li>
-  <li>egl/wayland: select the format based on the interface used</li>
-</ul>
-
-<p>Ian Romanick (3):</p>
-<ul>
-  <li>r100: Don't assume that the base mipmap of a texture exists</li>
-  <li>r100,r200: Don't assume glVisual is non-NULL during context creation</li>
-  <li>r100: Use _mesa_get_format_base_format in radeon_update_wrapper</li>
-</ul>
-
-<p>Jason Ekstrand (17):</p>
-<ul>
-  <li>anv: Handle color layout transitions from the UNINITIALIZED layout</li>
-  <li>anv: Handle transitioning depth from UNDEFINED to other layouts</li>
-  <li>anv/image: Get rid of the memset(aux, 0, sizeof(aux)) hack</li>
-  <li>anv: Predicate 48bit support on gen &gt;= 8</li>
-  <li>anv: Set up memory types and heaps during physical device init</li>
-  <li>anv: Set image memory types based on the type count</li>
-  <li>i965/blorp: Do and end-of-pipe sync on both sides of fast-clear ops</li>
-  <li>i965: Round copy size to the nearest block in intel_miptree_copy</li>
-  <li>anv: Set EXEC_OBJECT_ASYNC when available</li>
-  <li>anv: Determine the type of mapping based on type metadata</li>
-  <li>anv: Add valid_bufer_usage to the memory type metadata</li>
-  <li>anv: Stop setting BO flags in bo_init_new</li>
-  <li>anv: Make supports_48bit_addresses a heap property</li>
-  <li>anv: Refactor memory type setup</li>
-  <li>anv: Advertise both 32-bit and 48-bit heaps when we have enough memory</li>
-  <li>i965: Rework Sandy Bridge HiZ and stencil layouts</li>
-  <li>anv: Require vertex buffers to come from a 32-bit heap</li>
-</ul>
-
-<p>Juan A. Suarez Romero (13):</p>
-<ul>
-  <li>Revert "android: fix segfault within swap_buffers"</li>
-  <li>cherry-ignore: radeonsi: load patch_id for TES-as-ES when exporting for PS</li>
-  <li>cherry-ignore: anv: Determine the type of mapping based on type metadata</li>
-  <li>cherry-ignore: anv: Stop setting BO flags in bo_init_new</li>
-  <li>cherry-ignore: anv: Make supports_48bit_addresses a heap property</li>
-  <li>cherry-ignore: anv: Advertise both 32-bit and 48-bit heaps when we have enough memory</li>
-  <li>cherry-ignore: anv: Require vertex buffers to come from a 32-bit heap</li>
-  <li>cherry-ignore: radv: fix regression in descriptor set freeing</li>
-  <li>cherry-ignore: anv: Add valid_bufer_usage to the memory type metadata</li>
-  <li>cherry-ignore: anv: Refactor memory type setup</li>
-  <li>Revert "cherry-ignore: anv: [...]"</li>
-  <li>Revert "cherry-ignore: anv: Require vertex buffers to come from a 32-bit heap"</li>
-  <li>Update version to 17.1.2</li>
-</ul>
-
-<p>Marek Olšák (1):</p>
-<ul>
-  <li>radeonsi/gfx9: compile shaders with +xnack</li>
-</ul>
-
-<p>Nicolai Hähnle (1):</p>
-<ul>
-  <li>st/mesa: remove redundant stfb-&gt;iface checks</li>
-</ul>
-
-<p>Nicolas Boichat (1):</p>
-<ul>
-  <li>configure.ac: Also match -androideabi tuple</li>
-</ul>
-
-<p>Rob Clark (1):</p>
-<ul>
-  <li>freedreno: fix fence creation fail if no rendering</li>
-</ul>
-
-<p>Tapani Pälli (1):</p>
-<ul>
-  <li>egl/android: fix segfault within swap_buffers</li>
-</ul>
-
-<p>Timothy Arceri (1):</p>
-<ul>
-  <li>st/mesa: don't mark the program as in cache_fallback when there is cache miss</li>
-</ul>
-
-
-</div>
-</body>
-</html>

docs/relnotes/6.5.2.html

@@ -57,7 +57,7 @@ copy texturing).
 <li>New Intel i965 DRI driver
 <li>New <code>minstall</code> script to replace normal install program
 <li>Faster fragment program execution in software
-<li>Added (or fixed) support for <a href="https://www.khronos.org/registry/OpenGL/extensions/SGI/GLX_SGI_make_current_read.txt">
+<li>Added (or fixed) support for <a href="http://www.opengl.org/registry/specs/SGI/make_current_read.txt">
     GLX_SGI_make_current_read</a> to the following drivers:
     <ul>
     <li>radeon</li>

docs/relnotes/7.11.html

@@ -226,7 +226,7 @@ did not exist in the 7.10 release series at all.</p>
 
 <li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=36086">Bug 36086</a> - [wine] Segfault r300_resource_copy_region with some wine apps and RADEON_HYPERZ</li>
 
-<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=36182">Bug 36182</a> - Game Trine from https://www.humblebundle.com/ needs ATI_draw_buffers</li>
+<li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=36182">Bug 36182</a> - Game Trine from http://www.humblebundle.com/ needs ATI_draw_buffers</li>
 
 <li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=36268">Bug 36268</a> - [r300g, bisected] minor flickering in Unigine Sanctuary</li>
 

docs/relnotes/7.5.1.html

@@ -21,7 +21,7 @@ Mesa 7.5.1 is a bug-fix release fixing issues found since the 7.5 release.
 </p>
 <p>
 The main new feature of Mesa 7.5.x is the
-<a href="https://www.freedesktop.org/wiki/Software/gallium">Gallium3D</a> infrastructure.
+<a href="http://wiki.freedesktop.org/wiki/Software/gallium">Gallium3D</a> infrastructure.
 </p>
 <p>
 Mesa 7.5.1 implements the OpenGL 2.1 API, but the version reported by

docs/relnotes/7.5.2.html

@@ -21,7 +21,7 @@ Mesa 7.5.2 is a bug-fix release fixing issues found since the 7.5.1 release.
 </p>
 <p>
 The main new feature of Mesa 7.5.x is the
-<a href="https://www.freedesktop.org/wiki/Software/gallium">Gallium3D</a> infrastructure.
+<a href="http://wiki.freedesktop.org/wiki/Software/gallium">Gallium3D</a> infrastructure.
 </p>
 <p>
 Mesa 7.5.2 implements the OpenGL 2.1 API, but the version reported by

docs/relnotes/7.5.html

@@ -23,7 +23,7 @@ with the 7.4.x branch or wait for Mesa 7.5.1.
 </p>
 <p>
 The main new feature of Mesa 7.5 is the
-<a href="https://www.freedesktop.org/wiki/Software/gallium">Gallium3D</a> infrastructure.
+<a href="http://wiki.freedesktop.org/wiki/Software/gallium">Gallium3D</a> infrastructure.
 </p>
 <p>
 Mesa 7.5 implements the OpenGL 2.1 API, but the version reported by

docs/relnotes/9.0.html

@@ -90,7 +90,7 @@ The two supported build methods are now autoconf/automake and SCons.
 <li>Removed support for GL_ARB_shadow_ambient extension</li>
 <li>Removed Gallium3D - nvfx driver (use nv30 instead)</li>
 <li>
-libGLU has been moved into its own repository, found at <a href="https://cgit.freedesktop.org/mesa/glu/">https://cgit.freedesktop.org/mesa/glu/</a>
+libGLU has been moved into its own repository, found at <a href="http://cgit.freedesktop.org/mesa/glu/">http://cgit.freedesktop.org/mesa/glu/</a>
 </li>
 </ul>
 

docs/relnotes/9.1.2.html

@@ -68,9 +68,9 @@ b1ae5a4d9255953980bc9254f5323420  MesaLib-9.1.2.zip
 
 <li><a href="https://bugs.freedesktop.org/show_bug.cgi?id=62434">Bug 62434</a> - [bisected] 3284.073] (EE) AIGLX error: dlopen of /usr/lib/xorg/modules/dri/r600_dri.so failed (/usr/lib/libllvmradeon9.2.0.so: undefined symbol: lp_build_tgsi_intrinsic)</li>
 
-<li><a href="https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=349437">Debian bug #349437</a> - mesa - FTBFS: error: 'IEEE_ONE' undeclared</li>
+<li><a href="http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=349437">Debian bug #349437</a> - mesa - FTBFS: error: 'IEEE_ONE' undeclared</li>
 
-<li><a href="https://bugzilla.redhat.com/show_bug.cgi?id=918661">Redhat bug #918661</a> - crash in routine Avogadro UI manipulation</li>
+<li><a href="http://bugzilla.redhat.com/show_bug.cgi?id=918661">Redhat bug #918661</a> - crash in routine Avogadro UI manipulation</li>
 
 </ul>
 

docs/repository.html

@@ -17,13 +17,13 @@
 <h1>Code Repository</h1>
 
 <p>
-Mesa uses <a href="https://git-scm.com">git</a>
+Mesa uses <a href="http://git-scm.com">git</a>
 as its source code management system.
 </p>
 
 <p>
 The master git repository is hosted on
-<a href="https://www.freedesktop.org">freedesktop.org</a>.
+<a href="http://www.freedesktop.org">freedesktop.org</a>.
 </p>
 
 <p>
@@ -35,9 +35,9 @@ You may access the repository either as an
 
 <p>
 You may also 
-<a href="https://cgit.freedesktop.org/mesa/mesa/"
+<a href="http://cgit.freedesktop.org/mesa/mesa/"
 >browse the main Mesa git repository</a> and the
-<a href="https://cgit.freedesktop.org/mesa/demos"
+<a href="http://cgit.freedesktop.org/mesa/demos"
 >Mesa demos and tests git repository</a>.
 </p>
 
@@ -73,7 +73,7 @@ follow this procedure:
 </p>
 <ol>
 <li>Subscribe to the
-<a href="https://lists.freedesktop.org/mailman/listinfo/mesa-dev">mesa-dev</a>
+<a href="http://lists.freedesktop.org/mailman/listinfo/mesa-dev">mesa-dev</a>
 mailing list.
 <li>Start contributing to the project by
 <a href="submittingpatches.html" target="_parent">submitting patches</a> to
@@ -92,7 +92,7 @@ only if they're being supervised by another Mesa developer at the same
 organization and planning to work in a limited area of the code or on a
 separate branch.
 <li>To apply for an account, follow
-<a href="https://www.freedesktop.org/wiki/AccountRequests">these directions</a>.
+<a href="http://www.freedesktop.org/wiki/AccountRequests">these directions</a>.
 It's also appreciated if you briefly describe what you intend to do (work
 on a particular driver, add a new extension, etc.) in the bugzilla record.
 </ol>
@@ -121,7 +121,7 @@ Once your account is established:
 <h2>Windows Users</h2>
 
 <p>
-If you're <a href="https://git.wiki.kernel.org/index.php/WindowsInstall">
+If you're <a href="http://git.wiki.kernel.org/index.php/WindowsInstall">
 using git on Windows</a> you'll want to enable automatic CR/LF conversion in
 your local copy of the repository:
 </p>
@@ -144,7 +144,7 @@ Unix users don't need to set this option.
 <p>
 At any given time, there may be several active branches in Mesa's
 repository.
-Generally, <tt>master</tt> contains the latest development (unstable)
+Generally, the trunk contains the latest development (unstable)
 code while a branch has the latest stable code.
 </p>
 
@@ -235,7 +235,7 @@ If you want the rebase action to be the default action, then
     git config --global branch.autosetuprebase=always
 </pre>
 <p>
-See <a href="https://www.eecs.harvard.edu/~cduan/technical/git/">Understanding Git Conceptually</a> for a fairly clear explanation about all of this.
+See <a href="http://www.eecs.harvard.edu/~cduan/technical/git/">Understanding Git Conceptually</a> for a fairly clear explanation about all of this.
 </p>
 </ol>
 

docs/shading.html

@@ -18,7 +18,7 @@
 
 <p>
 This page describes the features and status of Mesa's support for the
-<a href="https://opengl.org/documentation/glsl/">
+<a href="http://opengl.org/documentation/glsl/">
 OpenGL Shading Language</a>.
 </p>
 
@@ -49,7 +49,8 @@ execution.  These are generally used for debugging.
 <li><b>log</b> - log all GLSL shaders to files.
     The filenames will be "shader_X.vert" or "shader_X.frag" where X
     the shader ID.
-<li><b>cache_info</b> - print debug information about shader cache
+<li><b>nopt</b> - disable compiler optimizations
+<li><b>opt</b> - force compiler optimizations
 <li><b>uniform</b> - print message to stdout when glUniform is called
 <li><b>nopvert</b> - force vertex shaders to be a simple shader that just transforms
     the vertex position with ftransform() and passes through the color and
@@ -220,7 +221,7 @@ regressions.
 </p>
 
 <p>
-The <a href="https://piglit.freedesktop.org/">Piglit</a> project
+The <a href="http://piglit.freedesktop.org/">Piglit</a> project
 has many GLSL tests.
 </p>
 

docs/sourcedocs.html

@@ -31,7 +31,7 @@ the <code>doxygen</code> directory and run <code>make</code>.
 
 <p>
 For an example of Doxygen usage in Mesa, see a recent source file
-such as <a href="https://cgit.freedesktop.org/mesa/mesa/tree/src/mesa/main/bufferobj.c">bufferobj.c</a>.
+such as <a href="http://cgit.freedesktop.org/mesa/mesa/tree/src/mesa/main/bufferobj.c">bufferobj.c</a>.
 </p>
 
 
@@ -41,11 +41,6 @@ run the doxygen scripts, you can read the documentation
 <a href="../doxygen/main/index.html">here</a>
 </p>
 
-<p>
-Gallium is also documented using Sphinx. The generated output can be found
-<a href="https://gallium.readthedocs.io">on Gallium.ReadTheDocs.io</a>.
-</p>
-
 </div>
 </body>
 </html>

docs/sourcetree.html

@@ -31,7 +31,7 @@ each directory.
     <ul>
     <li><b>glsl</b> - the GLSL IR and compiler
     <li><b>nir</b> - the NIR IR and compiler
-    <li><b>spirv</b> - the SPIR-V compiler
+    <li><b>spriv</b> - the SPIR-V compiler
     </ul>
   <li><b>egl</b> - EGL library sources
     <ul>

docs/specs/EGL_MESA_drm_image_formats.txt

@@ -1,98 +0,0 @@
-Name
-
-    MESA_drm_image_formats
-
-Name Strings
-
-    EGL_MESA_drm_image_formats
-
-Contributors
-
-    Nicolai Hähnle <Nicolai.Haehnle@amd.com>
-    Qiang Yu <Qiang.Yu@amd.com>
-
-Contact
-
-    Nicolai Hähnle <Nicolai.Haehnle@amd.com>
-
-Status
-
-    Proposal
-
-Version
-
-    Version 1, January 26, 2017
-
-Number
-
-    EGL Extension #??
-
-Dependencies
-
-    This extension requires the EGL_MESA_drm_image extension.
-
-    This extension is written against the wording of EGL_MESA_drm_image
-    specification.
-
-Overview
-
-    This extension extends the functionality of EGL_MESA_drm_image by adding
-    additional formats required by Glamor for use with DRM buffers.
-
-IP Status
-
-    Open-source; freely implementable.
-
-New Procedures and Functions
-
-    None
-
-New Tokens
-
-    Accepted as values for the EGL_IMAGE_FORMAT_MESA attribute:
-
-        EGL_DRM_BUFFER_FORMAT_ARGB2101010_MESA  0x3290
-        EGL_DRM_BUFFER_FORMAT_ARGB1555_MESA     0x3291
-        EGL_DRM_BUFFER_FORMAT_RGB565_MESA       0x3292
-
-Additions to the EGL_MESA_drm_image Specification:
-
-    Remove the sentence "The only format specified ..." from the paragraph
-    describing eglCreateDRMImageMESA and add the following paragraph:
-
-        The formats specified for use with EGL_DRM_BUFFER_FORMAT_MESA are:
-
-      * EGL_DRM_BUFFER_FORMAT_ARGB32_MESA, where each pixel is a CPU-endian
-        32-bit quantity, with alpha in the upper 8 bits, then red, then green,
-        then blue,
-
-      * EGL_DRM_BUFFER_FORMAT_ARGB2101010_MESA, where each pixel is a CPU-
-        endian, 32-bit quantity, with alpha in the most significant 2 bits,
-        followed by 10 bits each for red, green, and blue,
-
-      * EGL_DRM_BUFFER_FORMAT_ARGB1555_MESA, where each pixel is a CPU-endian
-        16-bit quantity, with alpha in the most significant bit, followed by
-        5 bits each for red, green, and blue, and
-
-      * EGL_DRM_BUFFER_FORMAT_RGB565_MESA, where each pixel is a CPU-endian
-        16-bit quantity, with red in the 5 most significant bits, followed by
-        6 bits of green and 5 bits of blue.
-
-Issues
-
-    1. Should we expose the full set of channel permutations for the formats,
-       e.g. ABGR2101010, RGBA1010102, and BGRA1010102 in addition to
-       ARGB2101010?
-
-       RESOLVED: No.
-
-       DISCUSSION: The original extension sets a precedent of only exposing one
-       of the possible permutations of 8-bit channel formats. It is also not
-       clear where the additional permutations would be used. For example,
-       Glamor has a fixed mapping from pixmap/screen depth to format that
-       doesn't allow for the other permutations.
-
-Revision History
-
-    Version 1, January, 2017
-        Initial draft (Nicolai Hähnle)

docs/specs/MESA_shader_integer_functions.txt

@@ -20,11 +20,11 @@ Status
 
 Version
 
-    Version 3, March 31, 2017
+    Version 2, July 7, 2016
 
 Number
 
-    OpenGL Extension #495
+    TBD
 
 Dependencies
 
@@ -34,7 +34,7 @@ Dependencies
     This extension is written against Version 1.50 (Revision 09) of the OpenGL
     Shading Language Specification.
 
-    GLSL 1.30 (OpenGL) or GLSL ES 3.00 (OpenGL ES) is required.
+    GLSL 1.30 is required.
 
     This extension interacts with ARB_gpu_shader5.
 
@@ -51,10 +51,9 @@ Overview
     calculations).
 
     This extension provides a set of new features to the OpenGL Shading
-    Language to support capabilities of these GPUs, extending the
-    capabilities of version 1.30 of the OpenGL Shading Language and version
-    3.00 of the OpenGL ES Shading Language.  Shaders using the new
-    functionality provided by this extension should enable this
+    Language to support capabilities of these GPUs, extending the capabilities
+    of version 1.30 of the OpenGL Shading Language.  Shaders
+    using the new functionality provided by this extension should enable this
     functionality via the construct
 
       #extension GL_MESA_shader_integer_functions : require   (or enable)
@@ -517,6 +516,5 @@ Revision History
 
     Rev.      Date     Author    Changes
     ----  -----------  --------  -----------------------------------------
-     3    31-Mar-2017  Jon Leech Add ES support (OpenGL-Registry/issues/3)
      2     7-Jul-2016  idr       Fix typo in #extension line
      1    20-Jun-2016  idr       Initial version based on GL_ARB_gpu_shader5.

docs/specs/MESA_texture_array.spec

@@ -76,9 +76,9 @@ Overview
 
     References:
 
-        https://www.opengl.org/discussion_boards/cgi_directory/ultimatebb.cgi?ubb=get_topic;f=3;t=011557
-        https://www.opengl.org/discussion_boards/cgi_directory/ultimatebb.cgi?ubb=get_topic;f=3;t=000516
-        https://www.opengl.org/discussion_boards/cgi_directory/ultimatebb.cgi?ubb=get_topic;f=3;t=011903
+        http://www.opengl.org/discussion_boards/cgi_directory/ultimatebb.cgi?ubb=get_topic;f=3;t=011557
+        http://www.opengl.org/discussion_boards/cgi_directory/ultimatebb.cgi?ubb=get_topic;f=3;t=000516
+        http://www.opengl.org/discussion_boards/cgi_directory/ultimatebb.cgi?ubb=get_topic;f=3;t=011903
         http://www.delphi3d.net/articles/viewarticle.php?article=terraintex.htm
 
 New Procedures and Functions

docs/specs/enums.txt

@@ -1,10 +1,10 @@
 The definitive source for enum values and reserved ranges are the XML files in
 the Khronos registry:
 
-    https://github.com/KhronosGroup/EGL-Registry/blob/master/api/egl.xml
-    https://github.com/KhronosGroup/OpenGL-Registry/blob/master/xml/gl.xml
-    https://github.com/KhronosGroup/OpenGL-Registry/blob/master/xml/glx.xml
-    https://github.com/KhronosGroup/OpenGL-Registry/blob/master/xml/wgl.xml
+    https://cvs.khronos.org/svn/repos/ogl/trunk/doc/registry/public/api/egl.xml
+    https://cvs.khronos.org/svn/repos/ogl/trunk/doc/registry/public/api/gl.xml
+    https://cvs.khronos.org/svn/repos/ogl/trunk/doc/registry/public/api/glx.xml
+    https://cvs.khronos.org/svn/repos/ogl/trunk/doc/registry/public/api/wgl.xml
 
 GL blocks allocated to Mesa:
        0x8750-0x875F
@@ -76,11 +76,6 @@ EGL_MESA_platform_gbm
 EGL_MESA_platform_surfaceless
         EGL_PLATFORM_SURFACELESS_MESA           0x31DD
 
-EGL_MESA_drm_image
-        EGL_DRM_BUFFER_FORMAT_ARGB2101010_MESA  0x3290
-        EGL_DRM_BUFFER_FORMAT_ARGB1555_MESA     0x3291
-        EGL_DRM_BUFFER_FORMAT_RGB565_MESA       0x3292
-
 EGL_WL_bind_wayland_display
         EGL_TEXTURE_FORMAT                      0x3080
         EGL_WAYLAND_BUFFER_WL                   0x31D5

docs/submittingpatches.html

@@ -25,7 +25,6 @@
 <li><a href="#reviewing">Reviewing Patches</a>
 <li><a href="#nominations">Nominating a commit for a stable branch</a>
 <li><a href="#criteria">Criteria for accepting patches to the stable branch</a>
-<li><a href="#backports">Sending backports for the stable branch</a>
 <li><a href="#gittips">Git tips</a>
 </ul>
 
@@ -73,16 +72,11 @@ if needed.  For example:
     platform.
 </pre>
 <li>A "Signed-off-by:" line is not required, but not discouraged either.
-<li>If a patch addresses a bugzilla issue, that should be noted in the
+<li>If a patch address a bugzilla issue, that should be noted in the
 patch comment.  For example:
 <pre>
    Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89689
 </pre>
-<li>If a patch addresses a issue introduced with earlier commit, that should be
-noted in the patch comment.  For example:
-<pre>
-   Fixes: d7b3707c612 "util/disk_cache: use stat() to check if entry is a directory"
-</pre>
 <li>If there have been several revisions to a patch during the review
 process, they should be noted such as in this example:
 <pre>
@@ -120,7 +114,7 @@ them in the CC list.
 Please use common sense and do <strong>not</strong> blindly add everyone.
 <br>
 <pre>
-    $ scripts/get_reviewer.pl --help # to get the help screen
+    $ scripts/get_reviewer.pl --help # to get the the help screen
     $ scripts/get_reviewer.pl -f src/egl/drivers/dri2/platform_android.c
     Rob Herring <robh@kernel.org> (reviewer:ANDROID EGL SUPPORT,added_lines:188/700=27%,removed_lines:58/283=20%)
     Tomasz Figa <tfiga@chromium.org> (reviewer:ANDROID EGL SUPPORT,authored:12/41=29%,added_lines:308/700=44%,removed_lines:115/283=41%)
@@ -146,7 +140,7 @@ to update the tests themselves.
 
 <p>
 Whenever possible and applicable, test the patch with
-<a href="https://piglit.freedesktop.org">Piglit</a> and/or
+<a href="http://piglit.freedesktop.org">Piglit</a> and/or
 <a href="https://android.googlesource.com/platform/external/deqp/">dEQP</a>
 to check for regressions.
 </p>
@@ -179,16 +173,6 @@ When submitting follow-up patches you should also login to
 state of your old patches to Superseded.
 </p>
 
-<p>
-Some companies' mail server automatically append a legal disclaimer,
-usually containing something along the lines of "The information in this
-email is confidential" and "distribution is strictly prohibited".<br/>
-These legal notices prevent us from being able to accept your patch,
-rendering the whole process pointless. Please make sure these are
-disabled before sending your patches. (Note that you may need to contact
-your email administrator for this.)
-</p>
-
 <h2 id="reviewing">Reviewing Patches</h2>
 
 <p>
@@ -221,7 +205,7 @@ as the issues are resolved first.
 <h2 id="nominations">Nominating a commit for a stable branch</h2>
 
 <p>
-There are three ways to nominate a patch for inclusion in the stable branch and
+There are three ways to nominate patch for inclusion of the stable branch and
 release.
 </p>
 <ul>
@@ -248,16 +232,22 @@ Here are some examples of such a note:
 </p>
 <ul>
   <li>CC: &lt;mesa-stable@lists.freedesktop.org&gt;</li>
+  <li>CC: "9.2 10.0" &lt;mesa-stable@lists.freedesktop.org&gt;</li>
+  <li>CC: "10.0" &lt;mesa-stable@lists.freedesktop.org&gt;</li>
 </ul>
 
 Simply adding the CC to the mesa-stable list address is adequate to nominate
-the commit for all the active stable branches. If the commit is not applicable
-for said branch the stable-release manager will reply stating so.
+the commit for the most-recently-created stable branch. It is only necessary
+to specify a specific branch name, (such as "9.2 10.0" or "10.0" in the
+examples above), if you want to nominate the commit for an older stable
+branch. And, as in these examples, you can nominate the commit for the older
+branch in addition to the more recent branch, or nominate the commit
+exclusively for the older branch.
 
 This "CC" syntax for patch nomination will cause patches to automatically be
 copied to the mesa-stable@ mailing list when you use "git send-email" to send
 patches to the mesa-dev@ mailing list. If you prefer using --suppress-cc that
-won't have any negative effect on the patch nomination.
+won't have any effect negative effect on the patch nomination.
 
 <p>
 Note: by removing the tag [as the commit is pushed] the patch is
@@ -266,60 +256,18 @@ Note: by removing the tag [as the commit is pushed] the patch is
 Thus, drop the line <strong>only</strong> if you want to cancel the nomination.
 </p>
 
-Alternatively, if one uses the "Fixes" tag as described in the "Patch formatting"
-section, it nominates a commit for all active stable branches that include the
-commit that is referred to.
-
 <h2 id="criteria">Criteria for accepting patches to the stable branch</h2>
 
 Mesa has a designated release manager for each stable branch, and the release
-manager is the only developer that should be pushing changes to these branches.
-Everyone else should nominate patches using the mechanism described above.
+manager is the only developer that should be pushing changes to these
+branches. Everyone else should simply nominate patches using the mechanism
+described above.
 
-The following rules define which patches are accepted and which are not. The
-stable-release manager is also given broad discretion in rejecting patches
-that have been nominated.
-
-<ul>
-  <li>Patch must conform with the <a href="#guidelines">Basic guidelines</a></li>
-
-  <li>Patch must have landed in master first. In case where the original
-  patch is too large and/or otherwise contradicts with the rules set within, a
-  backport is appropriate.</li>
-
-  <li>It must not introduce a regression - be that build or runtime wise.
-
-  Note:  If the regression is due to faulty piglit/dEQP/CTS/other test the
-  latter must be fixed first. A reference to the offending test(s) and
-  respective fix(es) should be provided in the nominated patch.</li>
-
-  <li>Patch cannot be larger than 100 lines.</li>
-
-  <li>Patches that move code around with no functional change should be
-  rejected.</li>
-
-  <li>Patch must be a bug fix and not a new feature.
-
-  Note: An exception to this rule, are hardware-enabling "features". For
-  example, <a href="#backports">backports</a> of new code to support a
-  newly-developed hardware product can be accepted if they can be reasonably
-  determined not to have effects on other hardware.</li>
-
-  <li>Patch must be reviewed, For example, the commit message has Reviewed-by,
-  Signed-off-by, or Tested-by tags from someone but the author.</li>
-
-  <li>Performance patches are considered only if they provide information
-  about the hardware, program in question and observed improvement. Use numbers
-  to represent your measurements.</li>
-</ul>
-
-If the patch complies with the rules it will be
-<a href="releasing.html#pickntest">cherry-picked</a>. Alternatively the release
-manager will reply to the patch in question stating why the patch has been
-rejected or would request a backport.
-
-A summary of all the picked/rejected patches will be presented in the
-<a href="releasing.html#prerelease">pre-release</a> announcement.
+The stable-release manager will work with the list of nominated patches, and
+for each patch that meets the criteria below will cherry-pick the patch with:
+<code>git cherry-pick -x &lt;commit&gt;</code>. The <code>-x</code> option is
+important so that the picked patch references the commit ID of the original
+patch.
 
 The stable-release manager may at times need to force-push changes to the
 stable branches, for example, to drop a previously-picked patch that was later
@@ -327,15 +275,71 @@ identified as causing a regression). These force-pushes may cause changes to
 be lost from the stable branch if developers push things directly. Consider
 yourself warned.
 
-<h2 id="backports">Sending backports for the stable branch</h2>
-By default merge conflicts are resolved by the stable-release manager. In which
-case he/she should provide a comment about the changes required, alongside the
-<code>Conflicts</code> section. Summary of which will be provided in the
-<a href="releasing.html#prerelease">pre-release</a> announcement.
-<br>
-Developers are interested in sending backports are recommended to use either a
-<code>[BACKPORT #branch]</code> subject prefix or provides similar information
-within the commit summary.
+The stable-release manager is also given broad discretion in rejecting patches
+that have been nominated for the stable branch. The most basic rule is that
+the stable branch is for bug fixes only, (no new features, no
+regressions). Here is a non-exhaustive list of some reasons that a patch may
+be rejected:
+
+<ul>
+  <li>Patch introduces a regression. Any reported build breakage or other
+  regression caused by a particular patch, (game no longer work, piglit test
+  changes from PASS to FAIL), is justification for rejecting a patch.</li>
+
+  <li>Patch is too large, (say, larger than 100 lines)</li>
+
+  <li>Patch is not a fix. For example, a commit that moves code around with no
+  functional change should be rejected.</li>
+
+  <li>Patch fix is not clearly described. For example, a commit message
+  of only a single line, no description of the bug, no mention of bugzilla,
+  etc.</li>
+
+  <li>Patch has not obviously been reviewed, For example, the commit message
+  has no Reviewed-by, Signed-off-by, nor Tested-by tags from anyone but the
+  author.</li>
+
+  <li>Patch has not already been merged to the master branch. As a rule, bug
+  fixes should never be applied first to a stable branch. Patches should land
+  first on the master branch and then be cherry-picked to a stable
+  branch. (This is to avoid future releases causing regressions if the patch
+  is not also applied to master.) The only things that might look like
+  exceptions would be backports of patches from master that happen to look
+  significantly different.</li>
+
+  <li>Patch depends on too many other patches. Ideally, all stable-branch
+  patches should be self-contained. It sometimes occurs that a single, logical
+  bug-fix occurs as two separate patches on master, (such as an original
+  patch, then a subsequent fix-up to that patch). In such a case, these two
+  patches should be squashed into a single, self-contained patch for the
+  stable branch. (Of course, if the squashing makes the patch too large, then
+  that could be a reason to reject the patch.)</li>
+
+  <li>Patch includes new feature development, not bug fixes. New OpenGL
+  features, extensions, etc. should be applied to Mesa master and included in
+  the next major release. Stable releases are intended only for bug fixes.
+
+  Note: As an exception to this rule, the stable-release manager may accept
+  hardware-enabling "features". For example, backports of new code to support
+  a newly-developed hardware product can be accepted if they can be reasonably
+  determined to not have effects on other hardware.</li>
+
+  <li>Patch is a performance optimization. As a rule, performance patches are
+  not candidates for the stable branch. The only exception might be a case
+  where an application's performance was recently severely impacted so as to
+  become unusable. The fix for this performance regression could then be
+  considered for a stable branch. The optimization must also be
+  non-controversial and the patches still need to meet the other criteria of
+  being simple and self-contained</li>
+
+  <li>Patch introduces a new failure mode (such as an assert). While the new
+  assert might technically be correct, for example to make Mesa more
+  conformant, this is not the kind of "bug fix" we want in a stable
+  release. The potential problem here is that an OpenGL program that was
+  previously working, (even if technically non-compliant with the
+  specification), could stop working after this patch. So that would be a
+  regression that is unacceptable for the stable branch.</li>
+</ul>
 
 <h2 id="gittips">Git tips</h2>
 

docs/systems.html

@@ -36,10 +36,10 @@ Hardware drivers include:
   <li>Intel i965, i945, i915.
     See <a href="https://01.org/linuxgraphics">Intel's website</a></li>
   <li>AMD Radeon series.
-  See <a href="https://www.x.org/wiki/RadeonFeature">RadeonFeature</a></li>
+  See <a href="http://www.x.org/wiki/RadeonFeature">RadeonFeature</a></li>
   <li>NVIDIA GPUs.
-  See <a href="https://nouveau.freedesktop.org">Nouveau Wiki</a></li>
-  <li><a href="https://www.x.org/wiki/vmware">VMware virtual GPU</a></li>
+  See <a href="http://nouveau.freedesktop.org">Nouveau Wiki</a></li>
+  <li><a href="http://www.x.org/wiki/vmware">VMware virtual GPU</a></li>
 </ul>
 
 <p>
@@ -57,7 +57,7 @@ Additional driver information:
 </p>
 
 <ul>
-<li><a href="https://dri.freedesktop.org/"> DRI hardware
+<li><a href="http://dri.freedesktop.org/"> DRI hardware
 drivers</a> for the X Window System
 <li><a href="xlibdriver.html">Xlib / swrast driver</a> for the X Window System
 and Unix-like operating systems

docs/thanks.html

@@ -24,7 +24,7 @@ This list is far from complete and somewhat dated, unfortunately.
 
 <ul>
 <li>Early Mesa development was done while Brian was part of the
-<a href="https://www.ssec.wisc.edu/~billh/vis.html">
+<a href="http://www.ssec.wisc.edu/~billh/vis.html">
 SSEC Visualization Project</a> at the University of
 Wisconsin. He'd like to thank Bill Hibbard for letting him work on
 Mesa as part of that project.
@@ -40,9 +40,14 @@ Tungsten Graphics, Inc. have supported the ongoing development of Mesa.
 <br>
 <br>
 <li>The
-<a href="https://www.mesa3d.org">Mesa</a>
-website and git repository are hosted by
-<a href="https://freedesktop.org/">freedesktop.org</a>.
+<a href="http://www.mesa3d.org">Mesa</a>
+website is hosted by
+<a href="http://sourceforge.net">sourceforge.net</a>.
+<br>
+<br>
+
+<li>The Mesa git repository is hosted by
+<a href="http://freedesktop.org/">freedesktop.org</a>.
 <br>
 <br>
 

docs/utilities.html

@@ -17,11 +17,11 @@
 <h1>Development Utilities</h1>
 
 <dl>
-  <dt><a href="https://cgit.freedesktop.org/mesa/demos">Mesa demos collection</a></dt>
+  <dt><a href="http://cgit.freedesktop.org/mesa/demos">Mesa demos collection</a></dt>
   <dd>includes several utility routines in the <code>src/util/</code>
   directory.</dd>
 
-  <dt><a href="https://piglit.freedesktop.org">Piglit</a></dt>
+  <dt><a href="http://piglit.freedesktop.org">Piglit</a></dt>
   <dd>is an open-source test suite for OpenGL implementations.</dd>
 
   <dt><a href="https://github.com/apitrace/apitrace">ApiTrace</a></dt>
@@ -31,7 +31,7 @@
   <dd>is a very useful tool for tracking down
   memory-related problems in your code.</dd>
 
-  <dt><a href="https://scan.coverity.com/projects/mesa">Coverity</a><dt>
+  <dt><a href="http://scan.coverity.com/projects/mesa">Coverity</a><dt>
   <dd>provides static code analysis of Mesa.  If you create an account
   you can see the results and try to fix outstanding issues.</dd>
 </dl>

docs/viewperf.html

@@ -18,7 +18,7 @@
 
 <p>
 This page lists known issues with
-<a href="https://www.spec.org/gwpg/gpc.static/vp11info.html" target="_main">SPEC Viewperf 11</a>
+<a href="http://www.spec.org/gwpg/gpc.static/vp11info.html" target="_main">SPEC Viewperf 11</a>
 and <a href="https://www.spec.org/gwpg/gpc.static/vp12info.html" target="_main">SPEC Viewperf 12</a>
 when running on Mesa-based drivers.
 </p>
@@ -66,10 +66,10 @@ either in Viewperf or the Mesa driver.
 
 <p>
 These tests use features of the
-<a href="https://www.opengl.org/registry/specs/NV/fragment_program2.txt"
+<a href="http://www.opengl.org/registry/specs/NV/fragment_program2.txt"
 target="_main">
 GL_NV_fragment_program2</a> and
-<a href="https://www.opengl.org/registry/specs/NV/vertex_program3.txt"
+<a href="http://www.opengl.org/registry/specs/NV/vertex_program3.txt"
 target="_main">
 GL_NV_vertex_program3</a> extensions without checking if the driver supports
 them.
@@ -86,7 +86,7 @@ Subsequent drawing calls become no-ops and the rendering is incorrect.
 
 <p>
 These tests depend on the
-<a href="https://www.opengl.org/registry/specs/NV/primitive_restart.txt"
+<a href="http://www.opengl.org/registry/specs/NV/primitive_restart.txt"
 target="_main">GL_NV_primitive_restart</a> extension.
 </p>
 

docs/vmware-guest.html

@@ -18,7 +18,7 @@
 
 <p>
 This page describes how to build, install and use the
-<a href="https://www.vmware.com/">VMware</a> guest GL driver
+<a href="http://www.vmware.com/">VMware</a> guest GL driver
 (aka the SVGA or SVGA3D driver) for Linux using the latest source code.
 This driver gives a Linux virtual machine access to the host's GPU for
 hardware-accelerated 3D.
@@ -62,9 +62,9 @@ these instructions explain what to do.
 For more information about the X components see these wiki pages at x.org:
 </p>
 <ul>
-<li><a href="https://wiki.x.org/wiki/vmware">
+<li><a href="http://wiki.x.org/wiki/vmware">
 Driver Overview</a>
-<li><a href="https://wiki.x.org/wiki/vmware/vmware3D">
+<li><a href="http://wiki.x.org/wiki/vmware/vmware3D">
 xf86-video-vmware Details</a>
 </ul>
 
@@ -82,8 +82,8 @@ The components involved in this include:
 <p>
 All of these components reside in the guest Linux virtual machine.
 On the host, all you're doing is running VMware
-<a href="https://www.vmware.com/products/workstation/">Workstation</a> or
-<a href="https://www.vmware.com/products/fusion/">Fusion</a>.
+<a href="http://www.vmware.com/products/workstation/">Workstation</a> or
+<a href="http://www.vmware.com/products/fusion/">Fusion</a>.
 </p>
 
 

docs/xlibdriver.html

@@ -171,8 +171,9 @@ drawn with glDrawPixels.
 </p>
 
 <p>
-For more information about gamma correction, see the
-<a href="https://en.wikipedia.org/wiki/Gamma_correction">Wikipedia article</a>
+For more information about gamma correction see:
+<a href="http://www.inforamp.net/~poynton/notes/colour_and_gamma/GammaFAQ.html">
+the Gamma FAQ</a>
 </p>
 
 

include/EGL/egl.h

@@ -6,7 +6,7 @@ extern "C" {
 #endif
 
 /*
-** Copyright (c) 2013-2017 The Khronos Group Inc.
+** Copyright (c) 2013-2014 The Khronos Group Inc.
 **
 ** Permission is hereby granted, free of charge, to any person obtaining a
 ** copy of this software and/or associated documentation files (the
@@ -31,14 +31,14 @@ extern "C" {
 ** This header is generated from the Khronos OpenGL / OpenGL ES XML
 ** API Registry. The current version of the Registry, generator scripts
 ** used to make the header, and the header can be found at
-**   http://www.opengl.org/registry/egl
+**   http://www.opengl.org/registry/
 **
-** Khronos $Revision$ on $Date$
+** Khronos $Revision: 31039 $ on $Date: 2015-05-04 17:01:57 -0700 (Mon, 04 May 2015) $
 */
 
 #include <EGL/eglplatform.h>
 
-/* Generated on date 20161230 */
+/* Generated on date 20150504 */
 
 /* Generated C header for:
  * API: egl
@@ -78,7 +78,7 @@ typedef void (*__eglMustCastToProperFunctionPointerType)(void);
 #define EGL_CONFIG_ID                     0x3028
 #define EGL_CORE_NATIVE_ENGINE            0x305B
 #define EGL_DEPTH_SIZE                    0x3025
-#define EGL_DONT_CARE                     EGL_CAST(EGLint,-1)
+#define EGL_DONT_CARE                     ((EGLint)-1)
 #define EGL_DRAW                          0x3059
 #define EGL_EXTENSIONS                    0x3055
 #define EGL_FALSE                         0
@@ -95,9 +95,9 @@ typedef void (*__eglMustCastToProperFunctionPointerType)(void);
 #define EGL_NONE                          0x3038
 #define EGL_NON_CONFORMANT_CONFIG         0x3051
 #define EGL_NOT_INITIALIZED               0x3001
-#define EGL_NO_CONTEXT                    EGL_CAST(EGLContext,0)
-#define EGL_NO_DISPLAY                    EGL_CAST(EGLDisplay,0)
-#define EGL_NO_SURFACE                    EGL_CAST(EGLSurface,0)
+#define EGL_NO_CONTEXT                    ((EGLContext)0)
+#define EGL_NO_DISPLAY                    ((EGLDisplay)0)
+#define EGL_NO_SURFACE                    ((EGLSurface)0)
 #define EGL_PBUFFER_BIT                   0x0001
 #define EGL_PIXMAP_BIT                    0x0002
 #define EGL_READ                          0x305A
@@ -197,7 +197,7 @@ typedef void *EGLClientBuffer;
 #define EGL_RGB_BUFFER                    0x308E
 #define EGL_SINGLE_BUFFER                 0x3085
 #define EGL_SWAP_BEHAVIOR                 0x3093
-#define EGL_UNKNOWN                       EGL_CAST(EGLint,-1)
+#define EGL_UNKNOWN                       ((EGLint)-1)
 #define EGL_VERTICAL_RESOLUTION           0x3091
 EGLAPI EGLBoolean EGLAPIENTRY eglBindAPI (EGLenum api);
 EGLAPI EGLenum EGLAPIENTRY eglQueryAPI (void);
@@ -224,7 +224,7 @@ EGLAPI EGLBoolean EGLAPIENTRY eglWaitClient (void);
 
 #ifndef EGL_VERSION_1_4
 #define EGL_VERSION_1_4 1
-#define EGL_DEFAULT_DISPLAY               EGL_CAST(EGLNativeDisplayType,0)
+#define EGL_DEFAULT_DISPLAY               ((EGLNativeDisplayType)0)
 #define EGL_MULTISAMPLE_RESOLVE_BOX_BIT   0x0200
 #define EGL_MULTISAMPLE_RESOLVE           0x3099
 #define EGL_MULTISAMPLE_RESOLVE_DEFAULT   0x309A
@@ -266,7 +266,7 @@ typedef void *EGLImage;
 #define EGL_FOREVER                       0xFFFFFFFFFFFFFFFFull
 #define EGL_TIMEOUT_EXPIRED               0x30F5
 #define EGL_CONDITION_SATISFIED           0x30F6
-#define EGL_NO_SYNC                       EGL_CAST(EGLSync,0)
+#define EGL_NO_SYNC                       ((EGLSync)0)
 #define EGL_SYNC_FENCE                    0x30F9
 #define EGL_GL_COLORSPACE                 0x309D
 #define EGL_GL_COLORSPACE_SRGB            0x3089
@@ -283,7 +283,7 @@ typedef void *EGLImage;
 #define EGL_GL_TEXTURE_CUBE_MAP_POSITIVE_Z 0x30B7
 #define EGL_GL_TEXTURE_CUBE_MAP_NEGATIVE_Z 0x30B8
 #define EGL_IMAGE_PRESERVED               0x30D2
-#define EGL_NO_IMAGE                      EGL_CAST(EGLImage,0)
+#define EGL_NO_IMAGE                      ((EGLImage)0)
 EGLAPI EGLSync EGLAPIENTRY eglCreateSync (EGLDisplay dpy, EGLenum type, const EGLAttrib *attrib_list);
 EGLAPI EGLBoolean EGLAPIENTRY eglDestroySync (EGLDisplay dpy, EGLSync sync);
 EGLAPI EGLint EGLAPIENTRY eglClientWaitSync (EGLDisplay dpy, EGLSync sync, EGLint flags, EGLTime timeout);

include/EGL/eglext.h

@@ -6,7 +6,7 @@ extern "C" {
 #endif
 
 /*
-** Copyright (c) 2013-2017 The Khronos Group Inc.
+** Copyright (c) 2013-2016 The Khronos Group Inc.
 **
 ** Permission is hereby granted, free of charge, to any person obtaining a
 ** copy of this software and/or associated documentation files (the
@@ -31,14 +31,14 @@ extern "C" {
 ** This header is generated from the Khronos OpenGL / OpenGL ES XML
 ** API Registry. The current version of the Registry, generator scripts
 ** used to make the header, and the header can be found at
-**   http://www.opengl.org/registry/egl
+**   http://www.opengl.org/registry/
 **
 ** Khronos $Revision$ on $Date$
 */
 
 #include <EGL/eglplatform.h>
 
-#define EGL_EGLEXT_VERSION 20161230
+#define EGL_EGLEXT_VERSION 20160809
 
 /* Generated C header for:
  * API: egl
@@ -77,13 +77,6 @@ EGLAPI EGLSyncKHR EGLAPIENTRY eglCreateSync64KHR (EGLDisplay dpy, EGLenum type,
 #define EGL_VG_ALPHA_FORMAT_PRE_BIT_KHR   0x0040
 #endif /* EGL_KHR_config_attribs */
 
-#ifndef EGL_KHR_context_flush_control
-#define EGL_KHR_context_flush_control 1
-#define EGL_CONTEXT_RELEASE_BEHAVIOR_NONE_KHR 0
-#define EGL_CONTEXT_RELEASE_BEHAVIOR_KHR  0x2097
-#define EGL_CONTEXT_RELEASE_BEHAVIOR_FLUSH_KHR 0x2098
-#endif /* EGL_KHR_context_flush_control */
-
 #ifndef EGL_KHR_create_context
 #define EGL_KHR_create_context 1
 #define EGL_CONTEXT_MAJOR_VERSION_KHR     0x3098
@@ -195,7 +188,7 @@ EGLAPI EGLBoolean EGLAPIENTRY eglGetSyncAttribKHR (EGLDisplay dpy, EGLSyncKHR sy
 #define EGL_KHR_image 1
 typedef void *EGLImageKHR;
 #define EGL_NATIVE_PIXMAP_KHR             0x30B0
-#define EGL_NO_IMAGE_KHR                  EGL_CAST(EGLImageKHR,0)
+#define EGL_NO_IMAGE_KHR                  ((EGLImageKHR)0)
 typedef EGLImageKHR (EGLAPIENTRYP PFNEGLCREATEIMAGEKHRPROC) (EGLDisplay dpy, EGLContext ctx, EGLenum target, EGLClientBuffer buffer, const EGLint *attrib_list);
 typedef EGLBoolean (EGLAPIENTRYP PFNEGLDESTROYIMAGEKHRPROC) (EGLDisplay dpy, EGLImageKHR image);
 #ifdef EGL_EGLEXT_PROTOTYPES
@@ -264,7 +257,7 @@ EGLAPI EGLBoolean EGLAPIENTRY eglQuerySurface64KHR (EGLDisplay dpy, EGLSurface s
 
 #ifndef EGL_KHR_no_config_context
 #define EGL_KHR_no_config_context 1
-#define EGL_NO_CONFIG_KHR                 EGL_CAST(EGLConfig,0)
+#define EGL_NO_CONFIG_KHR                 ((EGLConfig)0)
 #endif /* EGL_KHR_no_config_context */
 
 #ifndef EGL_KHR_partial_update
@@ -309,7 +302,7 @@ EGLAPI EGLBoolean EGLAPIENTRY eglSetDamageRegionKHR (EGLDisplay dpy, EGLSurface
 #define EGL_SYNC_REUSABLE_KHR             0x30FA
 #define EGL_SYNC_FLUSH_COMMANDS_BIT_KHR   0x0001
 #define EGL_FOREVER_KHR                   0xFFFFFFFFFFFFFFFFull
-#define EGL_NO_SYNC_KHR                   EGL_CAST(EGLSyncKHR,0)
+#define EGL_NO_SYNC_KHR                   ((EGLSyncKHR)0)
 typedef EGLBoolean (EGLAPIENTRYP PFNEGLSIGNALSYNCKHRPROC) (EGLDisplay dpy, EGLSyncKHR sync, EGLenum mode);
 #ifdef EGL_EGLEXT_PROTOTYPES
 EGLAPI EGLBoolean EGLAPIENTRY eglSignalSyncKHR (EGLDisplay dpy, EGLSyncKHR sync, EGLenum mode);
@@ -322,7 +315,7 @@ EGLAPI EGLBoolean EGLAPIENTRY eglSignalSyncKHR (EGLDisplay dpy, EGLSyncKHR sync,
 typedef void *EGLStreamKHR;
 typedef khronos_uint64_t EGLuint64KHR;
 #ifdef KHRONOS_SUPPORT_INT64
-#define EGL_NO_STREAM_KHR                 EGL_CAST(EGLStreamKHR,0)
+#define EGL_NO_STREAM_KHR                 ((EGLStreamKHR)0)
 #define EGL_CONSUMER_LATENCY_USEC_KHR     0x3210
 #define EGL_PRODUCER_FRAME_KHR            0x3212
 #define EGL_CONSUMER_FRAME_KHR            0x3213
@@ -350,24 +343,6 @@ EGLAPI EGLBoolean EGLAPIENTRY eglQueryStreamu64KHR (EGLDisplay dpy, EGLStreamKHR
 #endif /* KHRONOS_SUPPORT_INT64 */
 #endif /* EGL_KHR_stream */
 
-#ifndef EGL_KHR_stream_attrib
-#define EGL_KHR_stream_attrib 1
-#ifdef KHRONOS_SUPPORT_INT64
-typedef EGLStreamKHR (EGLAPIENTRYP PFNEGLCREATESTREAMATTRIBKHRPROC) (EGLDisplay dpy, const EGLAttrib *attrib_list);
-typedef EGLBoolean (EGLAPIENTRYP PFNEGLSETSTREAMATTRIBKHRPROC) (EGLDisplay dpy, EGLStreamKHR stream, EGLenum attribute, EGLAttrib value);
-typedef EGLBoolean (EGLAPIENTRYP PFNEGLQUERYSTREAMATTRIBKHRPROC) (EGLDisplay dpy, EGLStreamKHR stream, EGLenum attribute, EGLAttrib *value);
-typedef EGLBoolean (EGLAPIENTRYP PFNEGLSTREAMCONSUMERACQUIREATTRIBKHRPROC) (EGLDisplay dpy, EGLStreamKHR stream, const EGLAttrib *attrib_list);
-typedef EGLBoolean (EGLAPIENTRYP PFNEGLSTREAMCONSUMERRELEASEATTRIBKHRPROC) (EGLDisplay dpy, EGLStreamKHR stream, const EGLAttrib *attrib_list);
-#ifdef EGL_EGLEXT_PROTOTYPES
-EGLAPI EGLStreamKHR EGLAPIENTRY eglCreateStreamAttribKHR (EGLDisplay dpy, const EGLAttrib *attrib_list);
-EGLAPI EGLBoolean EGLAPIENTRY eglSetStreamAttribKHR (EGLDisplay dpy, EGLStreamKHR stream, EGLenum attribute, EGLAttrib value);
-EGLAPI EGLBoolean EGLAPIENTRY eglQueryStreamAttribKHR (EGLDisplay dpy, EGLStreamKHR stream, EGLenum attribute, EGLAttrib *value);
-EGLAPI EGLBoolean EGLAPIENTRY eglStreamConsumerAcquireAttribKHR (EGLDisplay dpy, EGLStreamKHR stream, const EGLAttrib *attrib_list);
-EGLAPI EGLBoolean EGLAPIENTRY eglStreamConsumerReleaseAttribKHR (EGLDisplay dpy, EGLStreamKHR stream, const EGLAttrib *attrib_list);
-#endif
-#endif /* KHRONOS_SUPPORT_INT64 */
-#endif /* EGL_KHR_stream_attrib */
-
 #ifndef EGL_KHR_stream_consumer_gltexture
 #define EGL_KHR_stream_consumer_gltexture 1
 #ifdef EGL_KHR_stream
@@ -387,7 +362,7 @@ EGLAPI EGLBoolean EGLAPIENTRY eglStreamConsumerReleaseKHR (EGLDisplay dpy, EGLSt
 #define EGL_KHR_stream_cross_process_fd 1
 typedef int EGLNativeFileDescriptorKHR;
 #ifdef EGL_KHR_stream
-#define EGL_NO_FILE_DESCRIPTOR_KHR        EGL_CAST(EGLNativeFileDescriptorKHR,-1)
+#define EGL_NO_FILE_DESCRIPTOR_KHR        ((EGLNativeFileDescriptorKHR)(-1))
 typedef EGLNativeFileDescriptorKHR (EGLAPIENTRYP PFNEGLGETSTREAMFILEDESCRIPTORKHRPROC) (EGLDisplay dpy, EGLStreamKHR stream);
 typedef EGLStreamKHR (EGLAPIENTRYP PFNEGLCREATESTREAMFROMFILEDESCRIPTORKHRPROC) (EGLDisplay dpy, EGLNativeFileDescriptorKHR file_descriptor);
 #ifdef EGL_EGLEXT_PROTOTYPES
@@ -545,11 +520,6 @@ EGLAPI EGLBoolean EGLAPIENTRY eglQuerySurfacePointerANGLE (EGLDisplay dpy, EGLSu
 #define EGL_FIXED_SIZE_ANGLE              0x3201
 #endif /* EGL_ANGLE_window_fixed_size */
 
-#ifndef EGL_ARM_implicit_external_sync
-#define EGL_ARM_implicit_external_sync 1
-#define EGL_SYNC_PRIOR_COMMANDS_IMPLICIT_EXTERNAL_ARM 0x328A
-#endif /* EGL_ARM_implicit_external_sync */
-
 #ifndef EGL_ARM_pixmap_multisample_discard
 #define EGL_ARM_pixmap_multisample_discard 1
 #define EGL_DISCARD_SAMPLES_ARM           0x3286
@@ -575,7 +545,7 @@ EGLAPI EGLBoolean EGLAPIENTRY eglQuerySurfacePointerANGLE (EGLDisplay dpy, EGLSu
 #ifndef EGL_EXT_device_base
 #define EGL_EXT_device_base 1
 typedef void *EGLDeviceEXT;
-#define EGL_NO_DEVICE_EXT                 EGL_CAST(EGLDeviceEXT,0)
+#define EGL_NO_DEVICE_EXT                 ((EGLDeviceEXT)(0))
 #define EGL_BAD_DEVICE_EXT                0x322B
 #define EGL_DEVICE_EXT                    0x322C
 typedef EGLBoolean (EGLAPIENTRYP PFNEGLQUERYDEVICEATTRIBEXTPROC) (EGLDeviceEXT device, EGLint attribute, EGLAttrib *value);
@@ -608,21 +578,6 @@ EGLAPI EGLBoolean EGLAPIENTRY eglQueryDisplayAttribEXT (EGLDisplay dpy, EGLint a
 #define EGL_EXT_device_query 1
 #endif /* EGL_EXT_device_query */
 
-#ifndef EGL_EXT_gl_colorspace_bt2020_linear
-#define EGL_EXT_gl_colorspace_bt2020_linear 1
-#define EGL_GL_COLORSPACE_BT2020_LINEAR_EXT 0x333F
-#endif /* EGL_EXT_gl_colorspace_bt2020_linear */
-
-#ifndef EGL_EXT_gl_colorspace_bt2020_pq
-#define EGL_EXT_gl_colorspace_bt2020_pq 1
-#define EGL_GL_COLORSPACE_BT2020_PQ_EXT   0x3340
-#endif /* EGL_EXT_gl_colorspace_bt2020_pq */
-
-#ifndef EGL_EXT_gl_colorspace_scrgb_linear
-#define EGL_EXT_gl_colorspace_scrgb_linear 1
-#define EGL_GL_COLORSPACE_SCRGB_LINEAR_EXT 0x3350
-#endif /* EGL_EXT_gl_colorspace_scrgb_linear */
-
 #ifndef EGL_EXT_image_dma_buf_import
 #define EGL_EXT_image_dma_buf_import 1
 #define EGL_LINUX_DMA_BUF_EXT             0x3270
@@ -649,27 +604,6 @@ EGLAPI EGLBoolean EGLAPIENTRY eglQueryDisplayAttribEXT (EGLDisplay dpy, EGLint a
 #define EGL_YUV_CHROMA_SITING_0_5_EXT     0x3285
 #endif /* EGL_EXT_image_dma_buf_import */
 
-#ifndef EGL_EXT_image_dma_buf_import_modifiers
-#define EGL_EXT_image_dma_buf_import_modifiers 1
-#define EGL_DMA_BUF_PLANE3_FD_EXT         0x3440
-#define EGL_DMA_BUF_PLANE3_OFFSET_EXT     0x3441
-#define EGL_DMA_BUF_PLANE3_PITCH_EXT      0x3442
-#define EGL_DMA_BUF_PLANE0_MODIFIER_LO_EXT 0x3443
-#define EGL_DMA_BUF_PLANE0_MODIFIER_HI_EXT 0x3444
-#define EGL_DMA_BUF_PLANE1_MODIFIER_LO_EXT 0x3445
-#define EGL_DMA_BUF_PLANE1_MODIFIER_HI_EXT 0x3446
-#define EGL_DMA_BUF_PLANE2_MODIFIER_LO_EXT 0x3447
-#define EGL_DMA_BUF_PLANE2_MODIFIER_HI_EXT 0x3448
-#define EGL_DMA_BUF_PLANE3_MODIFIER_LO_EXT 0x3449
-#define EGL_DMA_BUF_PLANE3_MODIFIER_HI_EXT 0x344A
-typedef EGLBoolean (EGLAPIENTRYP PFNEGLQUERYDMABUFFORMATSEXTPROC) (EGLDisplay dpy, EGLint max_formats, EGLint *formats, EGLint *num_formats);
-typedef EGLBoolean (EGLAPIENTRYP PFNEGLQUERYDMABUFMODIFIERSEXTPROC) (EGLDisplay dpy, EGLint format, EGLint max_modifiers, EGLuint64KHR *modifiers, EGLBoolean *external_only, EGLint *num_modifiers);
-#ifdef EGL_EGLEXT_PROTOTYPES
-EGLAPI EGLBoolean EGLAPIENTRY eglQueryDmaBufFormatsEXT (EGLDisplay dpy, EGLint max_formats, EGLint *formats, EGLint *num_formats);
-EGLAPI EGLBoolean EGLAPIENTRY eglQueryDmaBufModifiersEXT (EGLDisplay dpy, EGLint format, EGLint max_modifiers, EGLuint64KHR *modifiers, EGLBoolean *external_only, EGLint *num_modifiers);
-#endif
-#endif /* EGL_EXT_image_dma_buf_import_modifiers */
-
 #ifndef EGL_EXT_multiview_window
 #define EGL_EXT_multiview_window 1
 #define EGL_MULTIVIEW_VIEW_COUNT_EXT      0x3134
@@ -679,8 +613,8 @@ EGLAPI EGLBoolean EGLAPIENTRY eglQueryDmaBufModifiersEXT (EGLDisplay dpy, EGLint
 #define EGL_EXT_output_base 1
 typedef void *EGLOutputLayerEXT;
 typedef void *EGLOutputPortEXT;
-#define EGL_NO_OUTPUT_LAYER_EXT           EGL_CAST(EGLOutputLayerEXT,0)
-#define EGL_NO_OUTPUT_PORT_EXT            EGL_CAST(EGLOutputPortEXT,0)
+#define EGL_NO_OUTPUT_LAYER_EXT           ((EGLOutputLayerEXT)0)
+#define EGL_NO_OUTPUT_PORT_EXT            ((EGLOutputPortEXT)0)
 #define EGL_BAD_OUTPUT_LAYER_EXT          0x322D
 #define EGL_BAD_OUTPUT_PORT_EXT           0x322E
 #define EGL_SWAP_INTERVAL_EXT             0x322F
@@ -717,13 +651,6 @@ EGLAPI const char *EGLAPIENTRY eglQueryOutputPortStringEXT (EGLDisplay dpy, EGLO
 #define EGL_OPENWF_PORT_ID_EXT            0x3239
 #endif /* EGL_EXT_output_openwf */
 
-#ifndef EGL_EXT_pixel_format_float
-#define EGL_EXT_pixel_format_float 1
-#define EGL_COLOR_COMPONENT_TYPE_EXT      0x3339
-#define EGL_COLOR_COMPONENT_TYPE_FIXED_EXT 0x333A
-#define EGL_COLOR_COMPONENT_TYPE_FLOAT_EXT 0x333B
-#endif /* EGL_EXT_pixel_format_float */
-
 #ifndef EGL_EXT_platform_base
 #define EGL_EXT_platform_base 1
 typedef EGLDisplay (EGLAPIENTRYP PFNEGLGETPLATFORMDISPLAYEXTPROC) (EGLenum platform, void *native_display, const EGLint *attrib_list);
@@ -769,20 +696,6 @@ EGLAPI EGLBoolean EGLAPIENTRY eglStreamConsumerOutputEXT (EGLDisplay dpy, EGLStr
 #endif
 #endif /* EGL_EXT_stream_consumer_egloutput */
 
-#ifndef EGL_EXT_surface_SMPTE2086_metadata
-#define EGL_EXT_surface_SMPTE2086_metadata 1
-#define EGL_SMPTE2086_DISPLAY_PRIMARY_RX_EXT 0x3341
-#define EGL_SMPTE2086_DISPLAY_PRIMARY_RY_EXT 0x3342
-#define EGL_SMPTE2086_DISPLAY_PRIMARY_GX_EXT 0x3343
-#define EGL_SMPTE2086_DISPLAY_PRIMARY_GY_EXT 0x3344
-#define EGL_SMPTE2086_DISPLAY_PRIMARY_BX_EXT 0x3345
-#define EGL_SMPTE2086_DISPLAY_PRIMARY_BY_EXT 0x3346
-#define EGL_SMPTE2086_WHITE_POINT_X_EXT   0x3347
-#define EGL_SMPTE2086_WHITE_POINT_Y_EXT   0x3348
-#define EGL_SMPTE2086_MAX_LUMINANCE_EXT   0x3349
-#define EGL_SMPTE2086_MIN_LUMINANCE_EXT   0x334A
-#endif /* EGL_EXT_surface_SMPTE2086_metadata */
-
 #ifndef EGL_EXT_swap_buffers_with_damage
 #define EGL_EXT_swap_buffers_with_damage 1
 typedef EGLBoolean (EGLAPIENTRYP PFNEGLSWAPBUFFERSWITHDAMAGEEXTPROC) (EGLDisplay dpy, EGLSurface surface, EGLint *rects, EGLint n_rects);
@@ -889,11 +802,6 @@ EGLAPI EGLBoolean EGLAPIENTRY eglExportDMABUFImageMESA (EGLDisplay dpy, EGLImage
 #define EGL_PLATFORM_GBM_MESA             0x31D7
 #endif /* EGL_MESA_platform_gbm */
 
-#ifndef EGL_MESA_platform_surfaceless
-#define EGL_MESA_platform_surfaceless 1
-#define EGL_PLATFORM_SURFACELESS_MESA     0x31DD
-#endif /* EGL_MESA_platform_surfaceless */
-
 #ifndef EGL_NOK_swap_region
 #define EGL_NOK_swap_region 1
 typedef EGLBoolean (EGLAPIENTRYP PFNEGLSWAPBUFFERSREGIONNOKPROC) (EGLDisplay dpy, EGLSurface surface, EGLint numRects, const EGLint *rects);
@@ -993,48 +901,6 @@ EGLAPI EGLBoolean EGLAPIENTRY eglStreamConsumerGLTextureExternalAttribsNV (EGLDi
 #endif
 #endif /* EGL_NV_stream_consumer_gltexture_yuv */
 
-#ifndef EGL_NV_stream_cross_display
-#define EGL_NV_stream_cross_display 1
-#define EGL_STREAM_CROSS_DISPLAY_NV       0x334E
-#endif /* EGL_NV_stream_cross_display */
-
-#ifndef EGL_NV_stream_cross_object
-#define EGL_NV_stream_cross_object 1
-#define EGL_STREAM_CROSS_OBJECT_NV        0x334D
-#endif /* EGL_NV_stream_cross_object */
-
-#ifndef EGL_NV_stream_cross_partition
-#define EGL_NV_stream_cross_partition 1
-#define EGL_STREAM_CROSS_PARTITION_NV     0x323F
-#endif /* EGL_NV_stream_cross_partition */
-
-#ifndef EGL_NV_stream_cross_process
-#define EGL_NV_stream_cross_process 1
-#define EGL_STREAM_CROSS_PROCESS_NV       0x3245
-#endif /* EGL_NV_stream_cross_process */
-
-#ifndef EGL_NV_stream_cross_system
-#define EGL_NV_stream_cross_system 1
-#define EGL_STREAM_CROSS_SYSTEM_NV        0x334F
-#endif /* EGL_NV_stream_cross_system */
-
-#ifndef EGL_NV_stream_fifo_next
-#define EGL_NV_stream_fifo_next 1
-#define EGL_PENDING_FRAME_NV              0x3329
-#define EGL_STREAM_TIME_PENDING_NV        0x332A
-#endif /* EGL_NV_stream_fifo_next */
-
-#ifndef EGL_NV_stream_fifo_synchronous
-#define EGL_NV_stream_fifo_synchronous 1
-#define EGL_STREAM_FIFO_SYNCHRONOUS_NV    0x3336
-#endif /* EGL_NV_stream_fifo_synchronous */
-
-#ifndef EGL_NV_stream_frame_limits
-#define EGL_NV_stream_frame_limits 1
-#define EGL_PRODUCER_MAX_FRAME_HINT_NV    0x3337
-#define EGL_CONSUMER_MAX_FRAME_HINT_NV    0x3338
-#endif /* EGL_NV_stream_frame_limits */
-
 #ifndef EGL_NV_stream_metadata
 #define EGL_NV_stream_metadata 1
 #define EGL_MAX_STREAM_METADATA_BLOCKS_NV 0x3250
@@ -1061,45 +927,6 @@ EGLAPI EGLBoolean EGLAPIENTRY eglQueryStreamMetadataNV (EGLDisplay dpy, EGLStrea
 #endif
 #endif /* EGL_NV_stream_metadata */
 
-#ifndef EGL_NV_stream_remote
-#define EGL_NV_stream_remote 1
-#define EGL_STREAM_STATE_INITIALIZING_NV  0x3240
-#define EGL_STREAM_TYPE_NV                0x3241
-#define EGL_STREAM_PROTOCOL_NV            0x3242
-#define EGL_STREAM_ENDPOINT_NV            0x3243
-#define EGL_STREAM_LOCAL_NV               0x3244
-#define EGL_STREAM_PRODUCER_NV            0x3247
-#define EGL_STREAM_CONSUMER_NV            0x3248
-#define EGL_STREAM_PROTOCOL_FD_NV         0x3246
-#endif /* EGL_NV_stream_remote */
-
-#ifndef EGL_NV_stream_reset
-#define EGL_NV_stream_reset 1
-#define EGL_SUPPORT_RESET_NV              0x3334
-#define EGL_SUPPORT_REUSE_NV              0x3335
-typedef EGLBoolean (EGLAPIENTRYP PFNEGLRESETSTREAMNVPROC) (EGLDisplay dpy, EGLStreamKHR stream);
-#ifdef EGL_EGLEXT_PROTOTYPES
-EGLAPI EGLBoolean EGLAPIENTRY eglResetStreamNV (EGLDisplay dpy, EGLStreamKHR stream);
-#endif
-#endif /* EGL_NV_stream_reset */
-
-#ifndef EGL_NV_stream_socket
-#define EGL_NV_stream_socket 1
-#define EGL_STREAM_PROTOCOL_SOCKET_NV     0x324B
-#define EGL_SOCKET_HANDLE_NV              0x324C
-#define EGL_SOCKET_TYPE_NV                0x324D
-#endif /* EGL_NV_stream_socket */
-
-#ifndef EGL_NV_stream_socket_inet
-#define EGL_NV_stream_socket_inet 1
-#define EGL_SOCKET_TYPE_INET_NV           0x324F
-#endif /* EGL_NV_stream_socket_inet */
-
-#ifndef EGL_NV_stream_socket_unix
-#define EGL_NV_stream_socket_unix 1
-#define EGL_SOCKET_TYPE_UNIX_NV           0x324E
-#endif /* EGL_NV_stream_socket_unix */
-
 #ifndef EGL_NV_stream_sync
 #define EGL_NV_stream_sync 1
 #define EGL_SYNC_NEW_FRAME_NV             0x321F
@@ -1126,7 +953,7 @@ typedef khronos_utime_nanoseconds_t EGLTimeNV;
 #define EGL_SYNC_TYPE_NV                  0x30ED
 #define EGL_SYNC_CONDITION_NV             0x30EE
 #define EGL_SYNC_FENCE_NV                 0x30EF
-#define EGL_NO_SYNC_NV                    EGL_CAST(EGLSyncNV,0)
+#define EGL_NO_SYNC_NV                    ((EGLSyncNV)0)
 typedef EGLSyncNV (EGLAPIENTRYP PFNEGLCREATEFENCESYNCNVPROC) (EGLDisplay dpy, EGLenum condition, const EGLint *attrib_list);
 typedef EGLBoolean (EGLAPIENTRYP PFNEGLDESTROYSYNCNVPROC) (EGLSyncNV sync);
 typedef EGLBoolean (EGLAPIENTRYP PFNEGLFENCENVPROC) (EGLSyncNV sync);

include/EGL/eglmesaext.h

@@ -85,12 +85,10 @@ typedef EGLBoolean (EGLAPIENTRYP PFNEGLSWAPBUFFERSREGIONNOK) (EGLDisplay dpy, EG
 #define EGL_NO_CONFIG_MESA			((EGLConfig)0)
 #endif
 
-#ifndef EGL_MESA_drm_image_formats
-#define EGL_MESA_drm_image_formats 1
-#define EGL_DRM_BUFFER_FORMAT_ARGB2101010_MESA  0x3290
-#define EGL_DRM_BUFFER_FORMAT_ARGB1555_MESA     0x3291
-#define EGL_DRM_BUFFER_FORMAT_RGB565_MESA       0x3292
-#endif /* EGL_MESA_drm_image_formats */
+#ifndef EGL_MESA_platform_surfaceless
+#define EGL_MESA_platform_surfaceless 1
+#define EGL_PLATFORM_SURFACELESS_MESA           0x31DD
+#endif /* EGL_MESA_platform_surfaceless */
 
 #ifdef __cplusplus
 }

include/EGL/eglplatform.h

@@ -2,7 +2,7 @@
 #define __eglplatform_h_
 
 /*
-** Copyright (c) 2007-2016 The Khronos Group Inc.
+** Copyright (c) 2007-2013 The Khronos Group Inc.
 **
 ** Permission is hereby granted, free of charge, to any person obtaining a
 ** copy of this software and/or associated documentation files (the
@@ -150,12 +150,4 @@ typedef EGLNativeWindowType  NativeWindowType;
  */
 typedef khronos_int32_t EGLint;
 
-
-/* C++ / C typecast macros for special EGL handle values */
-#if defined(__cplusplus)
-#define EGL_CAST(type, value) (static_cast<type>(value))
-#else
-#define EGL_CAST(type, value) ((type) (value))
-#endif
-
 #endif /* __eglplatform_h */

include/GL/internal/dri_interface.h

@@ -1136,7 +1136,7 @@ struct __DRIdri2ExtensionRec {
  * extensions.
  */
 #define __DRI_IMAGE "DRI_IMAGE"
-#define __DRI_IMAGE_VERSION 14
+#define __DRI_IMAGE_VERSION 13
 
 /**
  * These formats correspond to the similarly named MESA_FORMAT_*
@@ -1164,8 +1164,6 @@ struct __DRIdri2ExtensionRec {
 #define __DRI_IMAGE_FORMAT_ARGB2101010  0x100a
 #define __DRI_IMAGE_FORMAT_SARGB8       0x100b
 #define __DRI_IMAGE_FORMAT_ARGB1555     0x100c
-#define __DRI_IMAGE_FORMAT_R16          0x100d
-#define __DRI_IMAGE_FORMAT_GR1616       0x100e
 
 #define __DRI_IMAGE_USE_SHARE		0x0001
 #define __DRI_IMAGE_USE_SCANOUT		0x0002
@@ -1194,8 +1192,6 @@ struct __DRIdri2ExtensionRec {
 #define __DRI_IMAGE_FOURCC_R8		0x20203852
 #define __DRI_IMAGE_FOURCC_GR88		0x38385247
 #define __DRI_IMAGE_FOURCC_ARGB1555	0x35315241
-#define __DRI_IMAGE_FOURCC_R16		0x20363152
-#define __DRI_IMAGE_FOURCC_GR1616	0x32335247
 #define __DRI_IMAGE_FOURCC_RGB565	0x36314752
 #define __DRI_IMAGE_FOURCC_ARGB8888	0x34325241
 #define __DRI_IMAGE_FOURCC_XRGB8888	0x34325258
@@ -1257,8 +1253,6 @@ struct __DRIdri2ExtensionRec {
 #define __DRI_IMAGE_ATTRIB_NUM_PLANES   0x2009 /* available in versions 11 */
 
 #define __DRI_IMAGE_ATTRIB_OFFSET 0x200A /* available in versions 13 */
-#define __DRI_IMAGE_ATTRIB_MODIFIER_LOWER 0x200B /* available in versions 14 */
-#define __DRI_IMAGE_ATTRIB_MODIFIER_UPPER 0x200C /* available in versions 14 */
 
 enum __DRIYUVColorSpace {
    __DRI_YUV_COLOR_SPACE_UNDEFINED = 0,
@@ -1470,29 +1464,6 @@ struct __DRIimageExtensionRec {
     */
    void (*unmapImage)(__DRIcontext *context, __DRIimage *image, void *data);
 
-
-   /**
-    * Creates an image with implementation's favorite modifiers.
-    *
-    * This acts like createImage except there is a list of modifiers passed in
-    * which the implementation may selectively use to create the DRIimage. The
-    * result should be the implementation selects one modifier (perhaps it would
-    * hold on to a few and later pick).
-    *
-    * The created image should be destroyed with destroyImage().
-    *
-    * Returns the new DRIimage. The chosen modifier can be obtained later on
-    * and passed back to things like the kernel's AddFB2 interface.
-    *
-    * \sa __DRIimageRec::createImage
-    *
-    * \since 14
-    */
-   __DRIimage *(*createImageWithModifiers)(__DRIscreen *screen,
-                                           int width, int height, int format,
-                                           const uint64_t *modifiers,
-                                           const unsigned int modifier_count,
-                                           void *loaderPrivate);
 };
 
 
@@ -1683,43 +1654,4 @@ struct __DRIimageDriverExtensionRec {
    __DRIgetAPIMaskFunc                  getAPIMask;
 };
 
-/**
- * Background callable loader extension.
- *
- * Loaders expose this extension to indicate to drivers that they are capable
- * of handling callbacks from the driver's background drawing threads.
- */
-#define __DRI_BACKGROUND_CALLABLE "DRI_BackgroundCallable"
-#define __DRI_BACKGROUND_CALLABLE_VERSION 1
-
-typedef struct __DRIbackgroundCallableExtensionRec __DRIbackgroundCallableExtension;
-struct __DRIbackgroundCallableExtensionRec {
-   __DRIextension base;
-
-   /**
-    * Indicate that this thread is being used by the driver as a background
-    * drawing thread which may make callbacks to the loader.
-    *
-    * \param loaderPrivate is the value that was passed to to the driver when
-    * the context was created.  This can be used by the loader to identify
-    * which context any callbacks are associated with.
-    *
-    * If this function is called more than once from any given thread, each
-    * subsequent call overrides the loaderPrivate data that was passed in the
-    * previous call.  The driver can take advantage of this to re-use a
-    * background thread to perform drawing on behalf of multiple contexts.
-    *
-    * It is permissible for the driver to call this function from a
-    * non-background thread (i.e. a thread that has already been bound to a
-    * context using __DRIcoreExtensionRec::bindContext()); when this happens,
-    * the \c loaderPrivate pointer must be equal to the pointer that was
-    * passed to the driver when the currently bound context was created.
-    *
-    * This call should execute quickly enough that the driver can call it with
-    * impunity whenever a background thread starts performing drawing
-    * operations (e.g. it should just set a thread-local variable).
-    */
-   void (*setBackgroundContext)(void *loaderPrivate);
-};
-
 #endif

include/pci_ids/i965_pci_ids.h

@@ -143,8 +143,8 @@ CHIPSET(0x1A84, bxt,     "Intel(R) HD Graphics (Broxton)")
 CHIPSET(0x1A85, bxt_2x6, "Intel(R) HD Graphics (Broxton 2x6)")
 CHIPSET(0x5A84, bxt,     "Intel(R) HD Graphics 505 (Broxton)")
 CHIPSET(0x5A85, bxt_2x6, "Intel(R) HD Graphics 500 (Broxton 2x6)")
-CHIPSET(0x5902, kbl_gt1, "Intel(R) HD Graphics 610 (Kaby Lake GT1)")
-CHIPSET(0x5906, kbl_gt1, "Intel(R) HD Graphics 610 (Kaby Lake GT1)")
+CHIPSET(0x5902, kbl_gt1, "Intel(R) Kabylake GT1")
+CHIPSET(0x5906, kbl_gt1, "Intel(R) Kabylake GT1")
 CHIPSET(0x590A, kbl_gt1, "Intel(R) Kabylake GT1")
 CHIPSET(0x5908, kbl_gt1, "Intel(R) Kabylake GT1")
 CHIPSET(0x590B, kbl_gt1, "Intel(R) Kabylake GT1")
@@ -152,16 +152,16 @@ CHIPSET(0x590E, kbl_gt1, "Intel(R) Kabylake GT1")
 CHIPSET(0x5913, kbl_gt1_5, "Intel(R) Kabylake GT1.5")
 CHIPSET(0x5915, kbl_gt1_5, "Intel(R) Kabylake GT1.5")
 CHIPSET(0x5917, kbl_gt1_5, "Intel(R) Kabylake GT1.5")
-CHIPSET(0x5912, kbl_gt2, "Intel(R) HD Graphics 630 (Kaby Lake GT2)")
-CHIPSET(0x5916, kbl_gt2, "Intel(R) HD Graphics 620 (Kaby Lake GT2)")
-CHIPSET(0x591A, kbl_gt2, "Intel(R) HD Graphics P630 (Kaby Lake GT2)")
-CHIPSET(0x591B, kbl_gt2, "Intel(R) HD Graphics 630 (Kaby Lake GT2)")
-CHIPSET(0x591D, kbl_gt2, "Intel(R) HD Graphics P630 (Kaby Lake GT2)")
-CHIPSET(0x591E, kbl_gt2, "Intel(R) HD Graphics 615 (Kaby Lake GT2)")
+CHIPSET(0x5912, kbl_gt2, "Intel(R) Kabylake GT2")
+CHIPSET(0x5916, kbl_gt2, "Intel(R) HD Graphics 620 (Kabylake GT2)")
+CHIPSET(0x591A, kbl_gt2, "Intel(R) Kabylake GT2")
+CHIPSET(0x591B, kbl_gt2, "Intel(R) Kabylake GT2")
+CHIPSET(0x591D, kbl_gt2, "Intel(R) Kabylake GT2")
+CHIPSET(0x591E, kbl_gt2, "Intel(R) HD Graphics 615 (Kabylake GT2)")
 CHIPSET(0x5921, kbl_gt2, "Intel(R) Kabylake GT2F")
 CHIPSET(0x5923, kbl_gt3, "Intel(R) Kabylake GT3")
-CHIPSET(0x5926, kbl_gt3, "Intel(R) Iris Plus Graphics 640 (Kaby Lake GT3)")
-CHIPSET(0x5927, kbl_gt3, "Intel(R) Iris Plus Graphics 650 (Kaby Lake GT3)")
+CHIPSET(0x5926, kbl_gt3, "Intel(R) Kabylake GT3")
+CHIPSET(0x5927, kbl_gt3, "Intel(R) Kabylake GT3")
 CHIPSET(0x593B, kbl_gt4, "Intel(R) Kabylake GT4")
 CHIPSET(0x3184, glk,     "Intel(R) HD Graphics (Geminilake)")
 CHIPSET(0x3185, glk_2x6, "Intel(R) HD Graphics (Geminilake 2x6)")

include/pci_ids/radeonsi_pci_ids.h

@@ -214,15 +214,3 @@ CHIPSET(0x6986, POLARIS12_, POLARIS12)
 CHIPSET(0x6987, POLARIS12_, POLARIS12)
 CHIPSET(0x6995, POLARIS12_, POLARIS12)
 CHIPSET(0x699F, POLARIS12_, POLARIS12)
-
-CHIPSET(0x6860, VEGA10_, VEGA10)
-CHIPSET(0x6861, VEGA10_, VEGA10)
-CHIPSET(0x6862, VEGA10_, VEGA10)
-CHIPSET(0x6863, VEGA10_, VEGA10)
-CHIPSET(0x6864, VEGA10_, VEGA10)
-CHIPSET(0x6867, VEGA10_, VEGA10)
-CHIPSET(0x6868, VEGA10_, VEGA10)
-CHIPSET(0x687F, VEGA10_, VEGA10)
-CHIPSET(0x686C, VEGA10_, VEGA10)
-
-CHIPSET(0x15DD, RAVEN_, RAVEN)

scons/gallium.py

@@ -291,9 +291,8 @@ def generate(env):
     # C preprocessor options
     cppdefines = []
     cppdefines += [
-        '__STDC_CONSTANT_MACROS',
-        '__STDC_FORMAT_MACROS',
         '__STDC_LIMIT_MACROS',
+        '__STDC_CONSTANT_MACROS',
         'HAVE_NO_AUTOCONF',
     ]
     if env['build'] in ('debug', 'checked'):
@@ -645,10 +644,10 @@ def generate(env):
     env.AddMethod(msvc2013_compat, 'MSVC2013Compat')
     env.AddMethod(unit_test, 'UnitTest')
 
-    env.PkgCheckModules('X11', ['x11', 'xext', 'xdamage >= 1.1', 'xfixes', 'glproto >= 1.4.13', 'dri2proto >= 2.8'])
+    env.PkgCheckModules('X11', ['x11', 'xext', 'xdamage', 'xfixes', 'glproto >= 1.4.13'])
     env.PkgCheckModules('XCB', ['x11-xcb', 'xcb-glx >= 1.8.1', 'xcb-dri2 >= 1.8'])
     env.PkgCheckModules('XF86VIDMODE', ['xxf86vm'])
-    env.PkgCheckModules('DRM', ['libdrm >= 2.4.75'])
+    env.PkgCheckModules('DRM', ['libdrm >= 2.4.66'])
 
     if env['x11']:
         env.Append(CPPPATH = env['X11_CPPPATH'])

scons/llvm.py

@@ -100,6 +100,8 @@ def generate(env):
 
         env.Prepend(CPPPATH = [os.path.join(llvm_dir, 'include')])
         env.AppendUnique(CPPDEFINES = [
+            '__STDC_LIMIT_MACROS', 
+            '__STDC_CONSTANT_MACROS',
             'HAVE_STDINT_H',
         ])
         env.Prepend(LIBPATH = [os.path.join(llvm_dir, 'lib')])

src/Makefile.am

@@ -75,16 +75,6 @@ endif
 # include only conditionally ?
 SUBDIRS += compiler
 
-## Optionally required by GBM, EGL and Vulkan
-if HAVE_PLATFORM_WAYLAND
-SUBDIRS += egl/wayland/wayland-drm
-endif
-
-if HAVE_VULKAN_COMMON
-SUBDIRS += vulkan
-endif
-EXTRA_DIST += vulkan/registry/vk.xml
-
 if HAVE_AMD_DRIVERS
 SUBDIRS += amd
 endif
@@ -103,6 +93,11 @@ if HAVE_DRI_GLX
 SUBDIRS += glx
 endif
 
+## Optionally required by GBM and EGL
+if HAVE_PLATFORM_WAYLAND
+SUBDIRS += egl/wayland/wayland-drm
+endif
+
 ## Optionally required by EGL (aka PLATFORM_GBM)
 if HAVE_GBM
 SUBDIRS += gbm
@@ -117,6 +112,20 @@ if HAVE_EGL
 SUBDIRS += egl
 endif
 
+if HAVE_INTEL_DRIVERS
+SUBDIRS += intel/tools
+endif
+
+if HAVE_VULKAN_COMMON
+SUBDIRS += vulkan/wsi
+endif
+EXTRA_DIST += vulkan/registry/vk.xml
+
+## Requires the i965 compiler (part of mesa) and wayland-drm
+if HAVE_INTEL_VULKAN
+SUBDIRS += intel/vulkan
+endif
+
 # Requires wayland-drm
 if HAVE_RADEON_VULKAN
 SUBDIRS += amd/vulkan

src/amd/Android.addrlib.mk

@@ -37,9 +37,7 @@ LOCAL_C_INCLUDES := \
 	$(MESA_TOP)/src/amd/common \
 	$(MESA_TOP)/src/amd/addrlib \
 	$(MESA_TOP)/src/amd/addrlib/core \
-	$(MESA_TOP)/src/amd/addrlib/inc/chip/gfx9 \
 	$(MESA_TOP)/src/amd/addrlib/inc/chip/r800 \
-	$(MESA_TOP)/src/amd/addrlib/gfx9/chip \
 	$(MESA_TOP)/src/amd/addrlib/r800/chip
 
 include $(MESA_COMMON_MK)

src/amd/Makefile.addrlib.am

@@ -26,9 +26,7 @@ addrlib_libamdgpu_addrlib_la_CPPFLAGS = \
 	-I$(srcdir)/common \
 	-I$(srcdir)/addrlib \
 	-I$(srcdir)/addrlib/core \
-	-I$(srcdir)/addrlib/inc/chip/gfx9 \
 	-I$(srcdir)/addrlib/inc/chip/r800 \
-	-I$(srcdir)/addrlib/gfx9/chip \
 	-I$(srcdir)/addrlib/r800/chip \
 	-DBRAHMA_BUILD=1
 

src/amd/Makefile.common.am

@@ -19,7 +19,7 @@
 # FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
 # IN THE SOFTWARE.
 
-if HAVE_GALLIUM_LLVM
+if NEED_RADEON_LLVM
 
 COMMON_LIBS = common/libamd_common.la
 
@@ -65,10 +65,8 @@ common_libamd_common_la_SOURCES += $(AMD_NIR_FILES)
 endif
 endif
 
-common_libamd_common_la_LIBADD = $(LIBELF_LIBS)
-
-common/sid_tables.h: $(srcdir)/common/sid_tables.py $(srcdir)/common/sid.h $(srcdir)/common/gfx9d.h
+common/sid_tables.h: $(srcdir)/common/sid_tables.py $(srcdir)/common/sid.h
 	$(AM_V_at)$(MKDIR_P) $(@D)
-	$(AM_V_GEN) $(PYTHON2) $(srcdir)/common/sid_tables.py $(srcdir)/common/sid.h $(srcdir)/common/gfx9d.h > $@
+	$(AM_V_GEN) $(PYTHON2) $(srcdir)/common/sid_tables.py $(srcdir)/common/sid.h > $@
 
 BUILT_SOURCES = $(AMD_GENERATED_FILES)

src/amd/Makefile.sources

@@ -1,5 +1,4 @@
 COMMON_HEADER_FILES = \
-	common/gfx9d.h \
 	common/sid.h \
 	common/r600d_common.h \
 	common/amd_family.h \
@@ -15,20 +14,8 @@ ADDRLIB_FILES = \
 	addrlib/core/addrelemlib.h \
 	addrlib/core/addrlib.cpp \
 	addrlib/core/addrlib.h \
-	addrlib/core/addrlib1.cpp \
-	addrlib/core/addrlib1.h \
-	addrlib/core/addrlib2.cpp \
-	addrlib/core/addrlib2.h \
 	addrlib/core/addrobject.cpp \
 	addrlib/core/addrobject.h \
-	addrlib/gfx9/chip/gfx9_enum.h \
-	addrlib/gfx9/coord.cpp \
-	addrlib/gfx9/coord.h \
-	addrlib/gfx9/gfx9addrlib.cpp \
-	addrlib/gfx9/gfx9addrlib.h \
-	addrlib/gfx9/rbmap.cpp \
-	addrlib/gfx9/rbmap.h \
-	addrlib/inc/chip/gfx9/gfx9_gb_reg.h \
 	addrlib/inc/chip/r800/si_gb_reg.h \
 	addrlib/inc/lnx_common_defs.h \
 	addrlib/r800/chip/si_ci_vi_merged_enum.h \
@@ -42,8 +29,6 @@ ADDRLIB_FILES = \
 AMD_COMPILER_FILES = \
 	common/ac_binary.c \
 	common/ac_binary.h \
-	common/ac_llvm_build.c \
-	common/ac_llvm_build.h \
 	common/ac_llvm_helper.cpp \
 	common/ac_llvm_util.c \
 	common/ac_llvm_util.h

src/amd/addrlib/addrtypes.h

@@ -25,16 +25,16 @@
  */
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 * @file  addrtypes.h
 * @brief Contains the helper function and constants
-****************************************************************************************************
+***************************************************************************************************
 */
 #ifndef __ADDR_TYPES_H__
 #define __ADDR_TYPES_H__
 
-#if defined(__APPLE__) && !defined(HAVE_TSERVER)
-// External definitions header maintained by Apple driver team, but not for diag team under Mac.
+#if defined(__APPLE__) || defined(TCORE_BUILD)
+// External definitions header maintained by Mac driver team (and TCORE team)
 // Helps address compilation issues & reduces code covered by NDA
 #include "addrExtDef.h"
 
@@ -59,12 +59,12 @@ typedef int            INT;
 
 #include <stdarg.h> // va_list...etc need this header
 
-#endif // defined (__APPLE__) && !defined(HAVE_TSERVER)
+#endif // defined (__APPLE__)
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 *   Calling conventions
-****************************************************************************************************
+***************************************************************************************************
 */
 #ifndef ADDR_CDECL
     #if defined(__GNUC__)
@@ -121,9 +121,9 @@ typedef int            INT;
 #define ADDR_API ADDR_FASTCALL //default call convention is fast call
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 * Global defines used by other modules
-****************************************************************************************************
+***************************************************************************************************
 */
 #if !defined(TILEINDEX_INVALID)
 #define TILEINDEX_INVALID                -1
@@ -138,9 +138,9 @@ typedef int            INT;
 #endif
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 * Return codes
-****************************************************************************************************
+***************************************************************************************************
 */
 typedef enum _ADDR_E_RETURNCODE
 {
@@ -159,14 +159,14 @@ typedef enum _ADDR_E_RETURNCODE
 } ADDR_E_RETURNCODE;
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 * @brief
 *   Neutral enums that define tile modes for all H/W
 * @note
 *   R600/R800 tiling mode can be cast to hw enums directly but never cast into HW enum from
 *   ADDR_TM_2D_TILED_XTHICK
 *
-****************************************************************************************************
+***************************************************************************************************
 */
 typedef enum _AddrTileMode
 {
@@ -195,154 +195,17 @@ typedef enum _AddrTileMode
     ADDR_TM_PRT_TILED_THICK     = 22,   ///< No bank/pipe rotation or hashing beyond macrotile size
     ADDR_TM_PRT_2D_TILED_THICK  = 23,   ///< Same as 2D_TILED_THICK, PRT only
     ADDR_TM_PRT_3D_TILED_THICK  = 24,   ///< Same as 3D_TILED_THICK, PRT only
-    ADDR_TM_UNKNOWN             = 25,   ///< Unkown tile mode, should be decided by address lib
-    ADDR_TM_COUNT               = 26,   ///< Must be the value of the last tile mode
+    ADDR_TM_COUNT               = 25,   ///< Must be the value of the last tile mode
 } AddrTileMode;
 
 /**
-****************************************************************************************************
-* @brief
-*   Neutral enums that define swizzle modes for Gfx9 ASIC
-* @note
-*
-*   ADDR_SW_LINEAR linear aligned addressing mode, for 1D/2D/3D resouce
-*   ADDR_SW_256B_* addressing block aligned size is 256B, for 2D/3D resouce
-*   ADDR_SW_4KB_*  addressing block aligned size is 4KB, for 2D/3D resouce
-*   ADDR_SW_64KB_* addressing block aligned size is 64KB, for 2D/3D resouce
-*   ADDR_SW_VAR_*  addressing block aligned size is ASIC specific, for 2D/3D resouce
-*
-*   ADDR_SW_*_Z    For 2D resouce, represents Z-order swizzle mode for depth/stencil/FMask
-                   For 3D resouce, represents a swizzle mode similar to legacy thick tile mode
-*   ADDR_SW_*_S    represents standard swizzle mode defined by MS
-*   ADDR_SW_*_D    For 2D resouce, represents a swizzle mode for displayable resource
-*                  For 3D resouce, represents a swizzle mode which places each slice in order & pixel
-                   within slice is placed as 2D ADDR_SW_*_S. Don't use this combination if possible!
-*   ADDR_SW_*_R    For 2D resouce only, represents a swizzle mode for rotated displayable resource
-*
-****************************************************************************************************
-*/
-typedef enum _AddrSwizzleMode
-{
-    ADDR_SW_LINEAR          = 0,
-    ADDR_SW_256B_S          = 1,
-    ADDR_SW_256B_D          = 2,
-    ADDR_SW_256B_R          = 3,
-    ADDR_SW_4KB_Z           = 4,
-    ADDR_SW_4KB_S           = 5,
-    ADDR_SW_4KB_D           = 6,
-    ADDR_SW_4KB_R           = 7,
-    ADDR_SW_64KB_Z          = 8,
-    ADDR_SW_64KB_S          = 9,
-    ADDR_SW_64KB_D          = 10,
-    ADDR_SW_64KB_R          = 11,
-    ADDR_SW_VAR_Z           = 12,
-    ADDR_SW_VAR_S           = 13,
-    ADDR_SW_VAR_D           = 14,
-    ADDR_SW_VAR_R           = 15,
-    ADDR_SW_64KB_Z_T        = 16,
-    ADDR_SW_64KB_S_T        = 17,
-    ADDR_SW_64KB_D_T        = 18,
-    ADDR_SW_64KB_R_T        = 19,
-    ADDR_SW_4KB_Z_X         = 20,
-    ADDR_SW_4KB_S_X         = 21,
-    ADDR_SW_4KB_D_X         = 22,
-    ADDR_SW_4KB_R_X         = 23,
-    ADDR_SW_64KB_Z_X        = 24,
-    ADDR_SW_64KB_S_X        = 25,
-    ADDR_SW_64KB_D_X        = 26,
-    ADDR_SW_64KB_R_X        = 27,
-    ADDR_SW_VAR_Z_X         = 28,
-    ADDR_SW_VAR_S_X         = 29,
-    ADDR_SW_VAR_D_X         = 30,
-    ADDR_SW_VAR_R_X         = 31,
-    ADDR_SW_LINEAR_GENERAL  = 32,
-    ADDR_SW_MAX_TYPE        = 33,
-
-    // Used for represent block with identical size
-    ADDR_SW_256B            = ADDR_SW_256B_S,
-    ADDR_SW_4KB             = ADDR_SW_4KB_S_X,
-    ADDR_SW_64KB            = ADDR_SW_64KB_S_X,
-    ADDR_SW_VAR             = ADDR_SW_VAR_S_X,
-} AddrSwizzleMode;
-
-/**
-****************************************************************************************************
-* @brief
-*   Neutral enums that define image type
-* @note
-*   this is new for address library interface version 2
-*
-****************************************************************************************************
-*/
-typedef enum _AddrResourceType
-{
-    ADDR_RSRC_TEX_1D = 0,
-    ADDR_RSRC_TEX_2D = 1,
-    ADDR_RSRC_TEX_3D = 2,
-    ADDR_RSRC_MAX_TYPE = 3,
-} AddrResourceType;
-
-/**
-****************************************************************************************************
-* @brief
-*   Neutral enums that define resource heap location
-* @note
-*   this is new for address library interface version 2
-*
-****************************************************************************************************
-*/
-typedef enum _AddrResrouceLocation
-{
-    ADDR_RSRC_LOC_UNDEF  = 0,   // Resource heap is undefined/unknown
-    ADDR_RSRC_LOC_LOCAL  = 1,   // CPU visable and CPU invisable local heap
-    ADDR_RSRC_LOC_USWC   = 2,   // CPU write-combined non-cached nonlocal heap
-    ADDR_RSRC_LOC_CACHED = 3,   // CPU cached nonlocal heap
-    ADDR_RSRC_LOC_INVIS  = 4,   // CPU invisable local heap only
-    ADDR_RSRC_LOC_MAX_TYPE = 5,
-} AddrResrouceLocation;
-
-/**
-****************************************************************************************************
-* @brief
-*   Neutral enums that define resource basic swizzle mode
-* @note
-*   this is new for address library interface version 2
-*
-****************************************************************************************************
-*/
-typedef enum _AddrSwType
-{
-    ADDR_SW_Z  = 0,   // Resource basic swizzle mode is ZOrder
-    ADDR_SW_S  = 1,   // Resource basic swizzle mode is Standard
-    ADDR_SW_D  = 2,   // Resource basic swizzle mode is Display
-    ADDR_SW_R  = 3,   // Resource basic swizzle mode is Rotated
-} AddrSwType;
-
-/**
-****************************************************************************************************
-* @brief
-*   Neutral enums that define mipmap major mode
-* @note
-*   this is new for address library interface version 2
-*
-****************************************************************************************************
-*/
-typedef enum _AddrMajorMode
-{
-    ADDR_MAJOR_X = 0,
-    ADDR_MAJOR_Y = 1,
-    ADDR_MAJOR_Z = 2,
-    ADDR_MAJOR_MAX_TYPE = 3,
-} AddrMajorMode;
-
-/**
-****************************************************************************************************
+***************************************************************************************************
 *   AddrFormat
 *
 *   @brief
 *       Neutral enum for SurfaceFormat
 *
-****************************************************************************************************
+***************************************************************************************************
 */
 typedef enum _AddrFormat {
     ADDR_FMT_INVALID                              = 0x00000000,
@@ -409,32 +272,16 @@ typedef enum _AddrFormat {
     ADDR_FMT_APC7                                 = 0x0000003d,
     ADDR_FMT_CTX1                                 = 0x0000003e,
     ADDR_FMT_RESERVED_63                          = 0x0000003f,
-    ADDR_FMT_ASTC_4x4                             = 0x00000040,
-    ADDR_FMT_ASTC_5x4                             = 0x00000041,
-    ADDR_FMT_ASTC_5x5                             = 0x00000042,
-    ADDR_FMT_ASTC_6x5                             = 0x00000043,
-    ADDR_FMT_ASTC_6x6                             = 0x00000044,
-    ADDR_FMT_ASTC_8x5                             = 0x00000045,
-    ADDR_FMT_ASTC_8x6                             = 0x00000046,
-    ADDR_FMT_ASTC_8x8                             = 0x00000047,
-    ADDR_FMT_ASTC_10x5                            = 0x00000048,
-    ADDR_FMT_ASTC_10x6                            = 0x00000049,
-    ADDR_FMT_ASTC_10x8                            = 0x0000004a,
-    ADDR_FMT_ASTC_10x10                           = 0x0000004b,
-    ADDR_FMT_ASTC_12x10                           = 0x0000004c,
-    ADDR_FMT_ASTC_12x12                           = 0x0000004d,
-    ADDR_FMT_ETC2_64BPP                           = 0x0000004e,
-    ADDR_FMT_ETC2_128BPP                          = 0x0000004f,
 } AddrFormat;
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 *   AddrDepthFormat
 *
 *   @brief
 *       Neutral enum for addrFlt32ToDepthPixel
 *
-****************************************************************************************************
+***************************************************************************************************
 */
 typedef enum _AddrDepthFormat
 {
@@ -450,13 +297,13 @@ typedef enum _AddrDepthFormat
 } AddrDepthFormat;
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 *   AddrColorFormat
 *
 *   @brief
 *       Neutral enum for ColorFormat
 *
-****************************************************************************************************
+***************************************************************************************************
 */
 typedef enum _AddrColorFormat
 {
@@ -499,13 +346,13 @@ typedef enum _AddrColorFormat
 } AddrColorFormat;
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 *   AddrSurfaceNumber
 *
 *   @brief
 *       Neutral enum for SurfaceNumber
 *
-****************************************************************************************************
+***************************************************************************************************
 */
 typedef enum _AddrSurfaceNumber {
     ADDR_NUMBER_UNORM                             = 0x00000000,
@@ -519,13 +366,13 @@ typedef enum _AddrSurfaceNumber {
 } AddrSurfaceNumber;
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 *   AddrSurfaceSwap
 *
 *   @brief
 *       Neutral enum for SurfaceSwap
 *
-****************************************************************************************************
+***************************************************************************************************
 */
 typedef enum _AddrSurfaceSwap {
     ADDR_SWAP_STD                                 = 0x00000000,
@@ -535,12 +382,12 @@ typedef enum _AddrSurfaceSwap {
 } AddrSurfaceSwap;
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 *   AddrHtileBlockSize
 *
 *   @brief
 *       Size of HTILE blocks, valid values are 4 or 8 for now
-****************************************************************************************************
+***************************************************************************************************
 */
 typedef enum _AddrHtileBlockSize
 {
@@ -550,7 +397,7 @@ typedef enum _AddrHtileBlockSize
 
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 *   AddrPipeCfg
 *
 *   @brief
@@ -563,7 +410,7 @@ typedef enum _AddrHtileBlockSize
 *       For hw configurations w/ non-pow2 memory number of memory channels, it usually matches
 *       the number of ROP units(? TODO: which registers??)
 *       The enum value = hw enum + 1 which is to reserve 0 for requesting default.
-****************************************************************************************************
+***************************************************************************************************
 */
 typedef enum _AddrPipeCfg
 {
@@ -586,12 +433,12 @@ typedef enum _AddrPipeCfg
 } AddrPipeCfg;
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 * AddrTileType
 *
 *   @brief
 *       Neutral enums that specifies micro tile type (MICRO_TILE_MODE)
-****************************************************************************************************
+***************************************************************************************************
 */
 typedef enum _AddrTileType
 {
@@ -602,13 +449,13 @@ typedef enum _AddrTileType
     ADDR_THICK              = 4,    ///< Thick micro-tiling, only valid for THICK and XTHICK
 } AddrTileType;
 
-////////////////////////////////////////////////////////////////////////////////////////////////////
+///////////////////////////////////////////////////////////////////////////////////////////////////
 //
 //  Type definitions: short system-independent names for address library types
 //
-////////////////////////////////////////////////////////////////////////////////////////////////////
+///////////////////////////////////////////////////////////////////////////////////////////////////
 
-#if !defined(__APPLE__) || defined(HAVE_TSERVER)
+#if !defined(__APPLE__)
 
 #ifndef BOOL_32        // no bool type in C
 /// @brief Boolean type, since none is defined in C
@@ -684,7 +531,7 @@ typedef enum _AddrTileType
 #define UINT_64  unsigned long long OR unsigned __int64
 #endif
 
-#endif // #if !defined(__APPLE__) || defined(HAVE_TSERVER)
+#endif // #if !defined(__APPLE__)
 
 //  ADDR64X is used to print addresses in hex form on both Windows and Linux
 //
@@ -727,11 +574,11 @@ typedef union {
 } ADDR_FLT_32;
 
 
-////////////////////////////////////////////////////////////////////////////////////////////////////
+///////////////////////////////////////////////////////////////////////////////////////////////////
 //
 //  Macros for controlling linking and building on multiple systems
 //
-////////////////////////////////////////////////////////////////////////////////////////////////////
+///////////////////////////////////////////////////////////////////////////////////////////////////
 #if defined(_MSC_VER)
 #if defined(va_copy)
 #undef va_copy  //redefine va_copy to support VC2013

src/amd/addrlib/core/addrcommon.h

@@ -25,10 +25,10 @@
  */
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 * @file  addrcommon.h
-* @brief Contains the helper function and constants.
-****************************************************************************************************
+* @brief Contains the helper function and constants
+***************************************************************************************************
 */
 
 #ifndef __ADDR_COMMON_H__
@@ -41,14 +41,108 @@
 // Moved from addrinterface.h so __KERNEL__ is not needed any more
 #if ADDR_LNX_KERNEL_BUILD // || (defined(__GNUC__) && defined(__KERNEL__))
     #include "lnx_common_defs.h" // ported from cmmqs
-#elif !defined(__APPLE__) || defined(HAVE_TSERVER)
+#elif !defined(__APPLE__)
     #include <stdlib.h>
     #include <string.h>
 #endif
 
-////////////////////////////////////////////////////////////////////////////////////////////////////
+///////////////////////////////////////////////////////////////////////////////////////////////////
+// Common constants
+///////////////////////////////////////////////////////////////////////////////////////////////////
+static const UINT_32 MicroTileWidth      = 8;       ///< Micro tile width, for 1D and 2D tiling
+static const UINT_32 MicroTileHeight     = 8;       ///< Micro tile height, for 1D and 2D tiling
+static const UINT_32 ThickTileThickness  = 4;       ///< Micro tile thickness, for THICK modes
+static const UINT_32 XThickTileThickness = 8;       ///< Extra thick tiling thickness
+static const UINT_32 PowerSaveTileBytes  = 64;      ///< Nuber of bytes per tile for power save 64
+static const UINT_32 CmaskCacheBits      = 1024;    ///< Number of bits for CMASK cache
+static const UINT_32 CmaskElemBits       = 4;       ///< Number of bits for CMASK element
+static const UINT_32 HtileCacheBits      = 16384;   ///< Number of bits for HTILE cache 512*32
+
+static const UINT_32 MicroTilePixels     = MicroTileWidth * MicroTileHeight;
+
+static const INT_32 TileIndexInvalid        = TILEINDEX_INVALID;
+static const INT_32 TileIndexLinearGeneral  = TILEINDEX_LINEAR_GENERAL;
+static const INT_32 TileIndexNoMacroIndex   = -3;
+
+///////////////////////////////////////////////////////////////////////////////////////////////////
+// Common macros
+///////////////////////////////////////////////////////////////////////////////////////////////////
+#define BITS_PER_BYTE 8
+#define BITS_TO_BYTES(x) ( ((x) + (BITS_PER_BYTE-1)) / BITS_PER_BYTE )
+#define BYTES_TO_BITS(x) ( (x) * BITS_PER_BYTE )
+
+/// Helper macros to select a single bit from an int (undefined later in section)
+#define _BIT(v,b)      (((v) >> (b) ) & 1)
+
+/**
+***************************************************************************************************
+* @brief Enums to identify AddrLib type
+***************************************************************************************************
+*/
+enum AddrLibClass
+{
+    BASE_ADDRLIB = 0x0,
+    R600_ADDRLIB = 0x6,
+    R800_ADDRLIB = 0x8,
+    SI_ADDRLIB   = 0xa,
+    CI_ADDRLIB   = 0xb,
+};
+
+/**
+***************************************************************************************************
+* AddrChipFamily
+*
+*   @brief
+*       Neutral enums that specifies chip family.
+*
+***************************************************************************************************
+*/
+enum AddrChipFamily
+{
+    ADDR_CHIP_FAMILY_IVLD,    ///< Invalid family
+    ADDR_CHIP_FAMILY_R6XX,
+    ADDR_CHIP_FAMILY_R7XX,
+    ADDR_CHIP_FAMILY_R8XX,
+    ADDR_CHIP_FAMILY_NI,
+    ADDR_CHIP_FAMILY_SI,
+    ADDR_CHIP_FAMILY_CI,
+    ADDR_CHIP_FAMILY_VI,
+};
+
+/**
+***************************************************************************************************
+* ADDR_CONFIG_FLAGS
+*
+*   @brief
+*       This structure is used to set addr configuration flags.
+***************************************************************************************************
+*/
+union ADDR_CONFIG_FLAGS
+{
+    struct
+    {
+        /// Clients do not need to set these flags except forceLinearAligned.
+        /// There flags are set up by AddrLib inside thru AddrInitGlobalParamsFromRegister
+        UINT_32 optimalBankSwap        : 1;    ///< New bank tiling for RV770 only
+        UINT_32 noCubeMipSlicesPad     : 1;    ///< Disables faces padding for cubemap mipmaps
+        UINT_32 fillSizeFields         : 1;    ///< If clients fill size fields in all input and
+                                               ///  output structure
+        UINT_32 ignoreTileInfo         : 1;    ///< Don't use tile info structure
+        UINT_32 useTileIndex           : 1;    ///< Make tileIndex field in input valid
+        UINT_32 useCombinedSwizzle     : 1;    ///< Use combined swizzle
+        UINT_32 checkLast2DLevel       : 1;    ///< Check the last 2D mip sub level
+        UINT_32 useHtileSliceAlign     : 1;    ///< Do htile single slice alignment
+        UINT_32 degradeBaseLevel       : 1;    ///< Degrade to 1D modes automatically for base level
+        UINT_32 allowLargeThickTile    : 1;    ///< Allow 64*thickness*bytesPerPixel > rowSize
+        UINT_32 reserved               : 22;   ///< Reserved bits for future use
+    };
+
+    UINT_32 value;
+};
+
+///////////////////////////////////////////////////////////////////////////////////////////////////
 // Platform specific debug break defines
-////////////////////////////////////////////////////////////////////////////////////////////////////
+///////////////////////////////////////////////////////////////////////////////////////////////////
 #if DEBUG
     #if defined(__GNUC__)
         #define ADDR_DBG_BREAK()
@@ -60,40 +154,30 @@
 #else
     #define ADDR_DBG_BREAK()
 #endif
-////////////////////////////////////////////////////////////////////////////////////////////////////
+///////////////////////////////////////////////////////////////////////////////////////////////////
 
-////////////////////////////////////////////////////////////////////////////////////////////////////
+///////////////////////////////////////////////////////////////////////////////////////////////////
 // Debug assertions used in AddrLib
-////////////////////////////////////////////////////////////////////////////////////////////////////
-#if defined(_WIN32) && (_MSC_VER >= 1400)
-    #define ADDR_ANALYSIS_ASSUME(expr) __analysis_assume(expr)
-#else
-    #define ADDR_ANALYSIS_ASSUME(expr) do { (void)(expr); } while (0)
-#endif
-
+///////////////////////////////////////////////////////////////////////////////////////////////////
 #if DEBUG
-    #define ADDR_ASSERT(__e)                                \
-        do {                                                    \
-            ADDR_ANALYSIS_ASSUME(__e);                          \
-            if ( !((__e) ? TRUE : FALSE)) { ADDR_DBG_BREAK(); } \
-        } while (0)
-    #define ADDR_ASSERT_ALWAYS() ADDR_DBG_BREAK()
-    #define ADDR_UNHANDLED_CASE() ADDR_ASSERT(!"Unhandled case")
-    #define ADDR_NOT_IMPLEMENTED() ADDR_ASSERT(!"Not implemented");
+#define ADDR_ASSERT(__e) if ( !((__e) ? TRUE : FALSE)) { ADDR_DBG_BREAK(); }
+#define ADDR_ASSERT_ALWAYS() ADDR_DBG_BREAK()
+#define ADDR_UNHANDLED_CASE() ADDR_ASSERT(!"Unhandled case")
+#define ADDR_NOT_IMPLEMENTED() ADDR_ASSERT(!"Not implemented");
 #else //DEBUG
-    #define ADDR_ASSERT(__e) ADDR_ANALYSIS_ASSUME(__e)
-    #define ADDR_ASSERT_ALWAYS()
-    #define ADDR_UNHANDLED_CASE()
-    #define ADDR_NOT_IMPLEMENTED()
+#define ADDR_ASSERT(__e)
+#define ADDR_ASSERT_ALWAYS()
+#define ADDR_UNHANDLED_CASE()
+#define ADDR_NOT_IMPLEMENTED()
 #endif //DEBUG
-////////////////////////////////////////////////////////////////////////////////////////////////////
+///////////////////////////////////////////////////////////////////////////////////////////////////
 
-////////////////////////////////////////////////////////////////////////////////////////////////////
+///////////////////////////////////////////////////////////////////////////////////////////////////
 // Debug print macro from legacy address library
-////////////////////////////////////////////////////////////////////////////////////////////////////
+///////////////////////////////////////////////////////////////////////////////////////////////////
 #if DEBUG
 
-#define ADDR_PRNT(a)    Object::DebugPrint a
+#define ADDR_PRNT(a)    AddrObject::DebugPrint a
 
 /// @brief Macro for reporting informational messages
 /// @ingroup util
@@ -161,130 +245,19 @@
 #define ADDR_EXIT(cond, a)
 
 #endif // DEBUG
-////////////////////////////////////////////////////////////////////////////////////////////////////
+///////////////////////////////////////////////////////////////////////////////////////////////////
 
-namespace Addr
-{
-
-namespace V1
-{
-////////////////////////////////////////////////////////////////////////////////////////////////////
-// Common constants
-////////////////////////////////////////////////////////////////////////////////////////////////////
-static const UINT_32 MicroTileWidth      = 8;       ///< Micro tile width, for 1D and 2D tiling
-static const UINT_32 MicroTileHeight     = 8;       ///< Micro tile height, for 1D and 2D tiling
-static const UINT_32 ThickTileThickness  = 4;       ///< Micro tile thickness, for THICK modes
-static const UINT_32 XThickTileThickness = 8;       ///< Extra thick tiling thickness
-static const UINT_32 PowerSaveTileBytes  = 64;      ///< Nuber of bytes per tile for power save 64
-static const UINT_32 CmaskCacheBits      = 1024;    ///< Number of bits for CMASK cache
-static const UINT_32 CmaskElemBits       = 4;       ///< Number of bits for CMASK element
-static const UINT_32 HtileCacheBits      = 16384;   ///< Number of bits for HTILE cache 512*32
-
-static const UINT_32 MicroTilePixels     = MicroTileWidth * MicroTileHeight;
-
-static const INT_32 TileIndexInvalid        = TILEINDEX_INVALID;
-static const INT_32 TileIndexLinearGeneral  = TILEINDEX_LINEAR_GENERAL;
-static const INT_32 TileIndexNoMacroIndex   = -3;
-
-} // V1
-
-namespace V2
-{
-////////////////////////////////////////////////////////////////////////////////////////////////////
-// Common constants
-////////////////////////////////////////////////////////////////////////////////////////////////////
-static const UINT_32 MaxSurfaceHeight = 16384;
-
-} // V2
-
-////////////////////////////////////////////////////////////////////////////////////////////////////
-// Common macros
-////////////////////////////////////////////////////////////////////////////////////////////////////
-#define BITS_PER_BYTE 8
-#define BITS_TO_BYTES(x) ( ((x) + (BITS_PER_BYTE-1)) / BITS_PER_BYTE )
-#define BYTES_TO_BITS(x) ( (x) * BITS_PER_BYTE )
-
-/// Helper macros to select a single bit from an int (undefined later in section)
-#define _BIT(v,b)      (((v) >> (b) ) & 1)
-
-/**
-****************************************************************************************************
-* @brief Enums to identify AddrLib type
-****************************************************************************************************
-*/
-enum LibClass
-{
-    BASE_ADDRLIB = 0x0,
-    R600_ADDRLIB = 0x6,
-    R800_ADDRLIB = 0x8,
-    SI_ADDRLIB   = 0xa,
-    CI_ADDRLIB   = 0xb,
-    AI_ADDRLIB   = 0xd,
-};
-
-/**
-****************************************************************************************************
-* ChipFamily
-*
-*   @brief
-*       Neutral enums that specifies chip family.
-*
-****************************************************************************************************
-*/
-enum ChipFamily
-{
-    ADDR_CHIP_FAMILY_IVLD,    ///< Invalid family
-    ADDR_CHIP_FAMILY_R6XX,
-    ADDR_CHIP_FAMILY_R7XX,
-    ADDR_CHIP_FAMILY_R8XX,
-    ADDR_CHIP_FAMILY_NI,
-    ADDR_CHIP_FAMILY_SI,
-    ADDR_CHIP_FAMILY_CI,
-    ADDR_CHIP_FAMILY_VI,
-    ADDR_CHIP_FAMILY_AI,
-};
-
-/**
-****************************************************************************************************
-* ConfigFlags
-*
-*   @brief
-*       This structure is used to set configuration flags.
-****************************************************************************************************
-*/
-union ConfigFlags
-{
-    struct
-    {
-        /// These flags are set up internally thru AddrLib::Create() based on ADDR_CREATE_FLAGS
-        UINT_32 optimalBankSwap        : 1;    ///< New bank tiling for RV770 only
-        UINT_32 noCubeMipSlicesPad     : 1;    ///< Disables faces padding for cubemap mipmaps
-        UINT_32 fillSizeFields         : 1;    ///< If clients fill size fields in all input and
-                                               ///  output structure
-        UINT_32 ignoreTileInfo         : 1;    ///< Don't use tile info structure
-        UINT_32 useTileIndex           : 1;    ///< Make tileIndex field in input valid
-        UINT_32 useCombinedSwizzle     : 1;    ///< Use combined swizzle
-        UINT_32 checkLast2DLevel       : 1;    ///< Check the last 2D mip sub level
-        UINT_32 useHtileSliceAlign     : 1;    ///< Do htile single slice alignment
-        UINT_32 allowLargeThickTile    : 1;    ///< Allow 64*thickness*bytesPerPixel > rowSize
-        UINT_32 disableLinearOpt       : 1;    ///< Disallow tile modes to be optimized to linear
-        UINT_32 reserved               : 22;   ///< Reserved bits for future use
-    };
-
-    UINT_32 value;
-};
-
-////////////////////////////////////////////////////////////////////////////////////////////////////
+///////////////////////////////////////////////////////////////////////////////////////////////////
 // Misc helper functions
 ////////////////////////////////////////////////////////////////////////////////////////////////////
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 *   AddrXorReduce
 *
 *   @brief
 *       Xor the right-side numberOfBits bits of x.
-****************************************************************************************************
+***************************************************************************************************
 */
 static inline UINT_32 XorReduce(
     UINT_32 x,
@@ -302,12 +275,12 @@ static inline UINT_32 XorReduce(
 }
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 *   IsPow2
 *
 *   @brief
 *       Check if the size (UINT_32) is pow 2
-****************************************************************************************************
+***************************************************************************************************
 */
 static inline UINT_32 IsPow2(
     UINT_32 dim)        ///< [in] dimension of miplevel
@@ -317,12 +290,12 @@ static inline UINT_32 IsPow2(
 }
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 *   IsPow2
 *
 *   @brief
 *       Check if the size (UINT_64) is pow 2
-****************************************************************************************************
+***************************************************************************************************
 */
 static inline UINT_64 IsPow2(
     UINT_64 dim)        ///< [in] dimension of miplevel
@@ -332,12 +305,12 @@ static inline UINT_64 IsPow2(
 }
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 *   ByteAlign
 *
 *   @brief
 *       Align UINT_32 "x" to "align" alignment, "align" should be power of 2
-****************************************************************************************************
+***************************************************************************************************
 */
 static inline UINT_32 PowTwoAlign(
     UINT_32 x,
@@ -351,12 +324,12 @@ static inline UINT_32 PowTwoAlign(
 }
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 *   ByteAlign
 *
 *   @brief
 *       Align UINT_64 "x" to "align" alignment, "align" should be power of 2
-****************************************************************************************************
+***************************************************************************************************
 */
 static inline UINT_64 PowTwoAlign(
     UINT_64 x,
@@ -370,12 +343,12 @@ static inline UINT_64 PowTwoAlign(
 }
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 *   Min
 *
 *   @brief
 *       Get the min value between two unsigned values
-****************************************************************************************************
+***************************************************************************************************
 */
 static inline UINT_32 Min(
     UINT_32 value1,
@@ -385,12 +358,12 @@ static inline UINT_32 Min(
 }
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 *   Min
 *
 *   @brief
 *       Get the min value between two signed values
-****************************************************************************************************
+***************************************************************************************************
 */
 static inline INT_32 Min(
     INT_32 value1,
@@ -400,12 +373,12 @@ static inline INT_32 Min(
 }
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 *   Max
 *
 *   @brief
 *       Get the max value between two unsigned values
-****************************************************************************************************
+***************************************************************************************************
 */
 static inline UINT_32 Max(
     UINT_32 value1,
@@ -415,12 +388,12 @@ static inline UINT_32 Max(
 }
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 *   Max
 *
 *   @brief
 *       Get the max value between two signed values
-****************************************************************************************************
+***************************************************************************************************
 */
 static inline INT_32 Max(
     INT_32 value1,
@@ -430,17 +403,19 @@ static inline INT_32 Max(
 }
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 *   NextPow2
 *
 *   @brief
 *       Compute the mipmap's next level dim size
-****************************************************************************************************
+***************************************************************************************************
 */
 static inline UINT_32 NextPow2(
     UINT_32 dim)        ///< [in] dimension of miplevel
 {
-    UINT_32 newDim = 1;
+    UINT_32 newDim;
+
+    newDim = 1;
 
     if (dim > 0x7fffffff)
     {
@@ -459,18 +434,23 @@ static inline UINT_32 NextPow2(
 }
 
 /**
-****************************************************************************************************
-*   Log2NonPow2
+***************************************************************************************************
+*   Log2
 *
 *   @brief
-*       Compute log of base 2 no matter the target is power of 2 or not
-****************************************************************************************************
+*       Compute log of base 2
+***************************************************************************************************
 */
-static inline UINT_32 Log2NonPow2(
+static inline UINT_32 Log2(
     UINT_32 x)      ///< [in] the value should calculate log based 2
 {
     UINT_32 y;
 
+    //
+    // Assert that x is a power of two.
+    //
+    ADDR_ASSERT(IsPow2(x));
+
     y = 0;
     while (x > 1)
     {
@@ -482,29 +462,12 @@ static inline UINT_32 Log2NonPow2(
 }
 
 /**
-****************************************************************************************************
-*   Log2
-*
-*   @brief
-*       Compute log of base 2
-****************************************************************************************************
-*/
-static inline UINT_32 Log2(
-    UINT_32 x)      ///< [in] the value should calculate log based 2
-{
-    // Assert that x is a power of two.
-    ADDR_ASSERT(IsPow2(x));
-
-    return Log2NonPow2(x);
-}
-
-/**
-****************************************************************************************************
+***************************************************************************************************
 *   QLog2
 *
 *   @brief
 *       Compute log of base 2 quickly (<= 16)
-****************************************************************************************************
+***************************************************************************************************
 */
 static inline UINT_32 QLog2(
     UINT_32 x)      ///< [in] the value should calculate log based 2
@@ -538,12 +501,12 @@ static inline UINT_32 QLog2(
 }
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 *   SafeAssign
 *
 *   @brief
 *       NULL pointer safe assignment
-****************************************************************************************************
+***************************************************************************************************
 */
 static inline VOID SafeAssign(
     UINT_32*    pLVal,  ///< [in] Pointer to left val
@@ -556,12 +519,12 @@ static inline VOID SafeAssign(
 }
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 *   SafeAssign
 *
 *   @brief
 *       NULL pointer safe assignment for 64bit values
-****************************************************************************************************
+***************************************************************************************************
 */
 static inline VOID SafeAssign(
     UINT_64*    pLVal,  ///< [in] Pointer to left val
@@ -574,12 +537,12 @@ static inline VOID SafeAssign(
 }
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 *   SafeAssign
 *
 *   @brief
 *       NULL pointer safe assignment for AddrTileMode
-****************************************************************************************************
+***************************************************************************************************
 */
 static inline VOID SafeAssign(
     AddrTileMode*    pLVal, ///< [in] Pointer to left val
@@ -591,341 +554,5 @@ static inline VOID SafeAssign(
     }
 }
 
-/**
-****************************************************************************************************
-*   RoundHalf
-*
-*   @brief
-*       return (x + 1) / 2
-****************************************************************************************************
-*/
-static inline UINT_32 RoundHalf(
-    UINT_32     x)     ///< [in] input value
-{
-    ADDR_ASSERT(x != 0);
-
-#if 1
-    return (x >> 1) + (x & 1);
-#else
-    return (x + 1) >> 1;
-#endif
-}
-
-/**
-****************************************************************************************************
-*   SumGeo
-*
-*   @brief
-*       Calculate sum of a geometric progression whose ratio is 1/2
-****************************************************************************************************
-*/
-static inline UINT_32 SumGeo(
-    UINT_32     base,   ///< [in] First term in the geometric progression
-    UINT_32     num)    ///< [in] Number of terms to be added into sum
-{
-    ADDR_ASSERT(base > 0);
-
-    UINT_32 sum = 0;
-    UINT_32 i = 0;
-    for (; (i < num) && (base > 1); i++)
-    {
-        sum += base;
-        base = RoundHalf(base);
-    }
-    sum += num - i;
-
-    return sum;
-}
-
-/**
-****************************************************************************************************
-*   GetBit
-*
-*   @brief
-*       Extract bit N value (0 or 1) of a UINT32 value.
-****************************************************************************************************
-*/
-static inline UINT_32 GetBit(
-    UINT_32     u32,   ///< [in] UINT32 value
-    UINT_32     pos)   ///< [in] bit position from LSB, valid range is [0..31]
-{
-    ADDR_ASSERT(pos <= 31);
-
-    return (u32 >> pos) & 0x1;
-}
-
-/**
-****************************************************************************************************
-*   GetBits
-*
-*   @brief
-*       Copy 'bitsNum' bits from src start from srcStartPos into destination from dstStartPos
-*       srcStartPos: 0~31 for UINT_32
-*       bitsNum    : 1~32 for UINT_32
-*       srcStartPos: 0~31 for UINT_32
-*                                                                 src start position
-*                                                                          |
-*       src : b[31] b[30] b[29] ... ... ... ... ... ... ... ... b[end]..b[beg] ... b[1] b[0]
-*                                   || Bits num || copy length  || Bits num ||
-*       dst : b[31] b[30] b[29] ... b[end]..b[beg] ... ... ... ... ... ... ... ... b[1] b[0]
-*                                              |
-*                                     dst start position
-****************************************************************************************************
-*/
-static inline UINT_32 GetBits(
-    UINT_32 src,
-    UINT_32 srcStartPos,
-    UINT_32 bitsNum,
-    UINT_32 dstStartPos)
-{
-    ADDR_ASSERT((srcStartPos < 32) && (dstStartPos < 32) && (bitsNum > 0));
-    ADDR_ASSERT((bitsNum + dstStartPos <= 32) && (bitsNum + srcStartPos <= 32));
-
-    return ((src >> srcStartPos) << (32 - bitsNum)) >> (32 - bitsNum - dstStartPos);
-}
-
-/**
-****************************************************************************************************
-*   MortonGen2d
-*
-*   @brief
-*       Generate 2D Morton interleave code with num lowest bits in each channel
-****************************************************************************************************
-*/
-static inline UINT_32 MortonGen2d(
-    UINT_32     x,     ///< [in] First channel
-    UINT_32     y,     ///< [in] Second channel
-    UINT_32     num)   ///< [in] Number of bits extracted from each channel
-{
-    UINT_32 mort = 0;
-
-    for (UINT_32 i = 0; i < num; i++)
-    {
-        mort |= (GetBit(y, i) << (2 * i));
-        mort |= (GetBit(x, i) << (2 * i + 1));
-    }
-
-    return mort;
-}
-
-/**
-****************************************************************************************************
-*   MortonGen3d
-*
-*   @brief
-*       Generate 3D Morton interleave code with num lowest bits in each channel
-****************************************************************************************************
-*/
-static inline UINT_32 MortonGen3d(
-    UINT_32     x,     ///< [in] First channel
-    UINT_32     y,     ///< [in] Second channel
-    UINT_32     z,     ///< [in] Third channel
-    UINT_32     num)   ///< [in] Number of bits extracted from each channel
-{
-    UINT_32 mort = 0;
-
-    for (UINT_32 i = 0; i < num; i++)
-    {
-        mort |= (GetBit(z, i) << (3 * i));
-        mort |= (GetBit(y, i) << (3 * i + 1));
-        mort |= (GetBit(x, i) << (3 * i + 2));
-    }
-
-    return mort;
-}
-
-/**
-****************************************************************************************************
-*   ReverseBitVector
-*
-*   @brief
-*       Return reversed lowest num bits of v: v[0]v[1]...v[num-2]v[num-1]
-****************************************************************************************************
-*/
-static inline UINT_32 ReverseBitVector(
-    UINT_32     v,     ///< [in] Reverse operation base value
-    UINT_32     num)   ///< [in] Number of bits used in reverse operation
-{
-    UINT_32 reverse = 0;
-
-    for (UINT_32 i = 0; i < num; i++)
-    {
-        reverse |= (GetBit(v, num - 1 - i) << i);
-    }
-
-    return reverse;
-}
-
-/**
-****************************************************************************************************
-*   FoldXor2d
-*
-*   @brief
-*       Xor bit vector v[num-1]v[num-2]...v[1]v[0] with v[num]v[num+1]...v[2*num-2]v[2*num-1]
-****************************************************************************************************
-*/
-static inline UINT_32 FoldXor2d(
-    UINT_32     v,     ///< [in] Xor operation base value
-    UINT_32     num)   ///< [in] Number of bits used in fold xor operation
-{
-    return (v & ((1 << num) - 1)) ^ ReverseBitVector(v >> num, num);
-}
-
-/**
-****************************************************************************************************
-*   DeMort
-*
-*   @brief
-*       Return v[0] | v[2] | v[4] | v[6]... | v[2*num - 2]
-****************************************************************************************************
-*/
-static inline UINT_32 DeMort(
-    UINT_32     v,     ///< [in] DeMort operation base value
-    UINT_32     num)   ///< [in] Number of bits used in fold DeMort operation
-{
-    UINT_32 d = 0;
-
-    for (UINT_32 i = 0; i < num; i++)
-    {
-        d |= ((v & (1 << (i << 1))) >> i);
-    }
-
-    return d;
-}
-
-/**
-****************************************************************************************************
-*   FoldXor3d
-*
-*   @brief
-*       v[0]...v[num-1] ^ v[3*num-1]v[3*num-3]...v[num+2]v[num] ^ v[3*num-2]...v[num+1]v[num-1]
-****************************************************************************************************
-*/
-static inline UINT_32 FoldXor3d(
-    UINT_32     v,     ///< [in] Xor operation base value
-    UINT_32     num)   ///< [in] Number of bits used in fold xor operation
-{
-    UINT_32 t = v & ((1 << num) - 1);
-    t ^= ReverseBitVector(DeMort(v >> num, num), num);
-    t ^= ReverseBitVector(DeMort(v >> (num + 1), num), num);
-
-    return t;
-}
-
-/**
-****************************************************************************************************
-*   InitChannel
-*
-*   @brief
-*       Set channel initialization value via a return value
-****************************************************************************************************
-*/
-static inline ADDR_CHANNEL_SETTING InitChannel(
-    UINT_32     valid,     ///< [in] valid setting
-    UINT_32     channel,   ///< [in] channel setting
-    UINT_32     index)     ///< [in] index setting
-{
-    ADDR_CHANNEL_SETTING t;
-    t.valid = valid;
-    t.channel = channel;
-    t.index = index;
-
-    return t;
-}
-
-/**
-****************************************************************************************************
-*   InitChannel
-*
-*   @brief
-*       Set channel initialization value via channel pointer
-****************************************************************************************************
-*/
-static inline VOID InitChannel(
-    UINT_32     valid,              ///< [in] valid setting
-    UINT_32     channel,            ///< [in] channel setting
-    UINT_32     index,              ///< [in] index setting
-    ADDR_CHANNEL_SETTING *pChanSet) ///< [out] channel setting to be initialized
-{
-    pChanSet->valid = valid;
-    pChanSet->channel = channel;
-    pChanSet->index = index;
-}
-
-
-/**
-****************************************************************************************************
-*   InitChannel
-*
-*   @brief
-*       Set channel initialization value via another channel
-****************************************************************************************************
-*/
-static inline VOID InitChannel(
-    ADDR_CHANNEL_SETTING *pChanDst, ///< [in] channel setting to be copied from
-    ADDR_CHANNEL_SETTING *pChanSrc) ///< [out] channel setting to be initialized
-{
-    pChanDst->valid = pChanSrc->valid;
-    pChanDst->channel = pChanSrc->channel;
-    pChanDst->index = pChanSrc->index;
-}
-
-/**
-****************************************************************************************************
-*   GetMaxValidChannelIndex
-*
-*   @brief
-*       Get max valid index for a specific channel
-****************************************************************************************************
-*/
-static inline UINT_32 GetMaxValidChannelIndex(
-    const ADDR_CHANNEL_SETTING *pChanSet,   ///< [in] channel setting to be initialized
-    UINT_32                     searchCount,///< [in] number of channel setting to be searched
-    UINT_32                     channel)    ///< [in] channel to be searched
-{
-    UINT_32 index = 0;
-
-    for (UINT_32 i = 0; i < searchCount; i++)
-    {
-        if (pChanSet[i].valid && (pChanSet[i].channel == channel))
-        {
-            index = Max(index, static_cast<UINT_32>(pChanSet[i].index));
-        }
-    }
-
-    return index;
-}
-
-/**
-****************************************************************************************************
-*   GetCoordActiveMask
-*
-*   @brief
-*       Get bit mask which indicates which positions in the equation match the target coord
-****************************************************************************************************
-*/
-static inline UINT_32 GetCoordActiveMask(
-    const ADDR_CHANNEL_SETTING *pChanSet,   ///< [in] channel setting to be initialized
-    UINT_32                     searchCount,///< [in] number of channel setting to be searched
-    UINT_32                     channel,    ///< [in] channel to be searched
-    UINT_32                     index)      ///< [in] index to be searched
-{
-    UINT_32 mask = 0;
-
-    for (UINT_32 i = 0; i < searchCount; i++)
-    {
-        if ((pChanSet[i].valid   == TRUE)    &&
-            (pChanSet[i].channel == channel) &&
-            (pChanSet[i].index   == index))
-        {
-            mask |= (1 << i);
-        }
-    }
-
-    return mask;
-}
-
-} // Addr
-
 #endif // __ADDR_COMMON_H__
 

src/amd/addrlib/core/addrelemlib.cpp

@@ -25,36 +25,33 @@
  */
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 * @file  addrelemlib.cpp
-* @brief Contains the class implementation for element/pixel related functions.
-****************************************************************************************************
+* @brief Contains the class implementation for element/pixel related functions
+***************************************************************************************************
 */
 
 #include "addrelemlib.h"
 #include "addrlib.h"
 
-namespace Addr
-{
 
 /**
-****************************************************************************************************
-*   ElemLib::ElemLib
+***************************************************************************************************
+*   AddrElemLib::AddrElemLib
 *
 *   @brief
 *       constructor
 *
 *   @return
 *       N/A
-****************************************************************************************************
+***************************************************************************************************
 */
-ElemLib::ElemLib(
-    Lib* pAddrLib)  ///< [in] Parent addrlib instance pointer
-    :
-    Object(pAddrLib->GetClient()),
+AddrElemLib::AddrElemLib(
+    AddrLib* const pAddrLib) :  ///< [in] Parent addrlib instance pointer
+    AddrObject(pAddrLib->GetClient()),
     m_pAddrLib(pAddrLib)
 {
-    switch (m_pAddrLib->GetChipFamily())
+    switch (m_pAddrLib->GetAddrChipFamily())
     {
         case ADDR_CHIP_FAMILY_R6XX:
             m_depthPlanarType = ADDR_DEPTH_PLANAR_R600;
@@ -78,62 +75,58 @@ ElemLib::ElemLib(
 }
 
 /**
-****************************************************************************************************
-*   ElemLib::~ElemLib
+***************************************************************************************************
+*   AddrElemLib::~AddrElemLib
 *
 *   @brief
 *       destructor
 *
 *   @return
 *       N/A
-****************************************************************************************************
+***************************************************************************************************
 */
-ElemLib::~ElemLib()
+AddrElemLib::~AddrElemLib()
 {
 }
 
 /**
-****************************************************************************************************
-*   ElemLib::Create
+***************************************************************************************************
+*   AddrElemLib::Create
 *
 *   @brief
 *       Creates and initializes AddrLib object.
 *
 *   @return
 *       Returns point to ADDR_CREATEINFO if successful.
-****************************************************************************************************
+***************************************************************************************************
 */
-ElemLib* ElemLib::Create(
-    const Lib* pAddrLib)   ///< [in] Pointer of parent AddrLib instance
+AddrElemLib* AddrElemLib::Create(
+    const AddrLib* const        pAddrLib)   ///< [in] Pointer of parent AddrLib instance
 {
-    ElemLib* pElemLib = NULL;
+    AddrElemLib* pElemLib = NULL;
 
     if (pAddrLib)
     {
-        VOID* pObj = Object::ClientAlloc(sizeof(ElemLib), pAddrLib->GetClient());
-        if (pObj)
-        {
-            pElemLib = new(pObj) ElemLib(const_cast<Lib* const>(pAddrLib));
-        }
+        pElemLib = new(pAddrLib->GetClient()) AddrElemLib(const_cast<AddrLib* const>(pAddrLib));
     }
 
     return pElemLib;
 }
 
 /**************************************************************************************************
-*   ElemLib::Flt32sToInt32s
+*   AddrElemLib::Flt32sToInt32s
 *
 *   @brief
 *       Convert a ADDR_FLT_32 value to Int32 value
 *
 *   @return
 *       N/A
-****************************************************************************************************
+***************************************************************************************************
 */
-VOID ElemLib::Flt32sToInt32s(
+VOID AddrElemLib::Flt32sToInt32s(
     ADDR_FLT_32     value,      ///< [in] ADDR_FLT_32 value
     UINT_32         bits,       ///< [in] nubmer of bits in value
-    NumberType      numberType, ///< [in] the type of number
+    AddrNumberType  numberType, ///< [in] the type of number
     UINT_32*        pResult)    ///< [out] Int32 value
 {
     UINT_8 round = 128;    //ADDR_ROUND_BY_HALF
@@ -310,8 +303,8 @@ VOID ElemLib::Flt32sToInt32s(
 }
 
 /**
-****************************************************************************************************
-*   ElemLib::Int32sToPixel
+***************************************************************************************************
+*   AddrElemLib::Int32sToPixel
 *
 *   @brief
 *       Pack 32-bit integer values into an uncompressed pixel,
@@ -325,14 +318,14 @@ VOID ElemLib::Flt32sToInt32s(
 *       an uncompressed pixel. The pixel values are specifies in
 *       standard order, e.g. depth/stencil. This routine asserts
 *       if called on compressed pixel.
-****************************************************************************************************
+***************************************************************************************************
 */
-VOID ElemLib::Int32sToPixel(
+VOID AddrElemLib::Int32sToPixel(
     UINT_32              numComps,      ///< [in] number of components
     UINT_32*             pComps,        ///< [in] compnents
     UINT_32*             pCompBits,     ///< [in] total bits in each component
     UINT_32*             pCompStart,    ///< [in] the first bit position of each component
-    ComponentFlags       properties,    ///< [in] properties about byteAligned, exportNorm
+    ADDR_COMPONENT_FLAGS properties,    ///< [in] properties about byteAligned, exportNorm
     UINT_32              resultBits,    ///< [in] result bits: total bpp after decompression
     UINT_8*              pPixel)        ///< [out] a depth/stencil pixel value
 {
@@ -383,7 +376,7 @@ VOID ElemLib::Int32sToPixel(
 }
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 *   Flt32ToDepthPixel
 *
 *   @brief
@@ -391,9 +384,9 @@ VOID ElemLib::Int32sToPixel(
 *
 *   @return
 *       N/A
-****************************************************************************************************
+***************************************************************************************************
 */
-VOID ElemLib::Flt32ToDepthPixel(
+VOID AddrElemLib::Flt32ToDepthPixel(
     AddrDepthFormat     format,     ///< [in] Depth format
     const ADDR_FLT_32   comps[2],   ///< [in] two components of depth
     UINT_8*             pPixel      ///< [out] depth pixel value
@@ -401,10 +394,10 @@ VOID ElemLib::Flt32ToDepthPixel(
 {
     UINT_32 i;
     UINT_32 values[2];
-    ComponentFlags properties;  // byteAligned, exportNorm
-    UINT_32 resultBits = 0;     // result bits: total bits per pixel after decompression
+    ADDR_COMPONENT_FLAGS properties;    // byteAligned, exportNorm
+    UINT_32 resultBits = 0;             // result bits: total bits per pixel after decompression
 
-    PixelFormatInfo fmt;
+    ADDR_PIXEL_FORMATINFO fmt;
 
     // get type for each component
     PixGetDepthCompInfo(format, &fmt);
@@ -452,7 +445,7 @@ VOID ElemLib::Flt32ToDepthPixel(
 }
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 *   Flt32ToColorPixel
 *
 *   @brief
@@ -460,9 +453,9 @@ VOID ElemLib::Flt32ToDepthPixel(
 *
 *   @return
 *       N/A
-****************************************************************************************************
+***************************************************************************************************
 */
-VOID ElemLib::Flt32ToColorPixel(
+VOID AddrElemLib::Flt32ToColorPixel(
     AddrColorFormat     format,     ///< [in] Color format
     AddrSurfaceNumber   surfNum,    ///< [in] Surface number
     AddrSurfaceSwap     surfSwap,   ///< [in] Surface swap
@@ -470,14 +463,14 @@ VOID ElemLib::Flt32ToColorPixel(
     UINT_8*             pPixel      ///< [out] a red/green/blue/alpha pixel value
     ) const
 {
-    PixelFormatInfo pixelInfo;
+    ADDR_PIXEL_FORMATINFO pixelInfo;
 
     UINT_32 i;
     UINT_32 values[4];
-    ComponentFlags properties;    // byteAligned, exportNorm
-    UINT_32 resultBits = 0;       // result bits: total bits per pixel after decompression
+    ADDR_COMPONENT_FLAGS properties;    // byteAligned, exportNorm
+    UINT_32 resultBits = 0;             // result bits: total bits per pixel after decompression
 
-    memset(&pixelInfo, 0, sizeof(PixelFormatInfo));
+    memset(&pixelInfo, 0, sizeof(ADDR_PIXEL_FORMATINFO));
 
     PixGetColorCompInfo(format, surfNum, surfSwap, &pixelInfo);
 
@@ -538,8 +531,8 @@ VOID ElemLib::Flt32ToColorPixel(
 }
 
 /**
-****************************************************************************************************
-*   ElemLib::GetCompType
+***************************************************************************************************
+*   AddrElemLib::GetCompType
 *
 *   @brief
 *       Fill per component info
@@ -547,12 +540,12 @@ VOID ElemLib::Flt32ToColorPixel(
 *   @return
 *       N/A
 *
-****************************************************************************************************
+***************************************************************************************************
 */
-VOID ElemLib::GetCompType(
-    AddrColorFormat   format,     ///< [in] surface format
-    AddrSurfaceNumber numType,  ///< [in] number type
-    PixelFormatInfo*  pInfo)       ///< [in][out] per component info out
+VOID AddrElemLib::GetCompType(
+    AddrColorFormat         format,     ///< [in] surface format
+    AddrSurfaceNumber       numType,  ///< [in] number type
+    ADDR_PIXEL_FORMATINFO*  pInfo)       ///< [in][out] per component info out
 {
     BOOL_32 handled = FALSE;
 
@@ -711,8 +704,8 @@ VOID ElemLib::GetCompType(
 }
 
 /**
-****************************************************************************************************
-*   ElemLib::GetCompSwap
+***************************************************************************************************
+*   AddrElemLib::GetCompSwap
 *
 *   @brief
 *       Get components swapped for color surface
@@ -720,11 +713,11 @@ VOID ElemLib::GetCompType(
 *   @return
 *       N/A
 *
-****************************************************************************************************
+***************************************************************************************************
 */
-VOID ElemLib::GetCompSwap(
-    AddrSurfaceSwap  swap,   ///< [in] swap mode
-    PixelFormatInfo* pInfo)  ///< [in,out] output per component info
+VOID AddrElemLib::GetCompSwap(
+    AddrSurfaceSwap         swap,   ///< [in] swap mode
+    ADDR_PIXEL_FORMATINFO*  pInfo)  ///< [in/out] output per component info
 {
     switch (pInfo->comps)
     {
@@ -801,8 +794,8 @@ VOID ElemLib::GetCompSwap(
 }
 
 /**
-****************************************************************************************************
-*   ElemLib::GetCompSwap
+***************************************************************************************************
+*   AddrElemLib::GetCompSwap
 *
 *   @brief
 *       Get components swapped for color surface
@@ -810,12 +803,12 @@ VOID ElemLib::GetCompSwap(
 *   @return
 *       N/A
 *
-****************************************************************************************************
+***************************************************************************************************
 */
-VOID ElemLib::SwapComps(
-    UINT_32          c0,     ///< [in] component index 0
-    UINT_32          c1,     ///< [in] component index 1
-    PixelFormatInfo* pInfo)  ///< [in,out] output per component info
+VOID AddrElemLib::SwapComps(
+    UINT_32                 c0,     ///< [in] component index 0
+    UINT_32                 c1,     ///< [in] component index 1
+    ADDR_PIXEL_FORMATINFO*  pInfo)  ///< [in/out] output per component info
 {
     UINT_32 start;
     UINT_32 bits;
@@ -830,8 +823,8 @@ VOID ElemLib::SwapComps(
 }
 
 /**
-****************************************************************************************************
-*   ElemLib::PixGetColorCompInfo
+***************************************************************************************************
+*   AddrElemLib::PixGetColorCompInfo
 *
 *   @brief
 *       Get per component info for color surface
@@ -839,13 +832,13 @@ VOID ElemLib::SwapComps(
 *   @return
 *       N/A
 *
-****************************************************************************************************
+***************************************************************************************************
 */
-VOID ElemLib::PixGetColorCompInfo(
-    AddrColorFormat   format, ///< [in] surface format, read from register
-    AddrSurfaceNumber number, ///< [in] pixel number type
-    AddrSurfaceSwap   swap,   ///< [in] component swap mode
-    PixelFormatInfo*  pInfo   ///< [out] output per component info
+VOID AddrElemLib::PixGetColorCompInfo(
+    AddrColorFormat         format, ///< [in] surface format, read from register
+    AddrSurfaceNumber       number, ///< [in] pixel number type
+    AddrSurfaceSwap         swap,   ///< [in] component swap mode
+    ADDR_PIXEL_FORMATINFO*  pInfo   ///< [out] output per component info
     ) const
 {
     // 1. Get componet bits
@@ -967,8 +960,8 @@ VOID ElemLib::PixGetColorCompInfo(
 }
 
 /**
-****************************************************************************************************
-*   ElemLib::PixGetDepthCompInfo
+***************************************************************************************************
+*   AddrElemLib::PixGetDepthCompInfo
 *
 *   @brief
 *       Get per component info for depth surface
@@ -976,11 +969,11 @@ VOID ElemLib::PixGetColorCompInfo(
 *   @return
 *       N/A
 *
-****************************************************************************************************
+***************************************************************************************************
 */
-VOID ElemLib::PixGetDepthCompInfo(
-    AddrDepthFormat  format,     ///< [in] surface format, read from register
-    PixelFormatInfo* pInfo       ///< [out] output per component bits and type
+VOID AddrElemLib::PixGetDepthCompInfo(
+    AddrDepthFormat         format,     ///< [in] surface format, read from register
+    ADDR_PIXEL_FORMATINFO*  pInfo       ///< [out] output per component bits and type
     ) const
 {
     if (m_depthPlanarType == ADDR_DEPTH_PLANAR_R800)
@@ -1065,8 +1058,8 @@ VOID ElemLib::PixGetDepthCompInfo(
 }
 
 /**
-****************************************************************************************************
-*   ElemLib::PixGetExportNorm
+***************************************************************************************************
+*   AddrElemLib::PixGetExportNorm
 *
 *   @brief
 *       Check if fp16 export norm can be enabled.
@@ -1074,9 +1067,9 @@ VOID ElemLib::PixGetDepthCompInfo(
 *   @return
 *       TRUE if this can be enabled.
 *
-****************************************************************************************************
+***************************************************************************************************
 */
-BOOL_32 ElemLib::PixGetExportNorm(
+BOOL_32 AddrElemLib::PixGetExportNorm(
     AddrColorFormat     colorFmt,       ///< [in] surface format, read from register
     AddrSurfaceNumber   numberFmt,      ///< [in] pixel number type
     AddrSurfaceSwap     swap            ///< [in] components swap type
@@ -1084,7 +1077,7 @@ BOOL_32 ElemLib::PixGetExportNorm(
 {
     BOOL_32 enabled = TRUE;
 
-    PixelFormatInfo formatInfo;
+    ADDR_PIXEL_FORMATINFO formatInfo;
 
     PixGetColorCompInfo(colorFmt, numberFmt, swap, &formatInfo);
 
@@ -1117,24 +1110,24 @@ BOOL_32 ElemLib::PixGetExportNorm(
 }
 
 /**
-****************************************************************************************************
-*   ElemLib::AdjustSurfaceInfo
+***************************************************************************************************
+*   AddrElemLib::AdjustSurfaceInfo
 *
 *   @brief
 *       Adjust bpp/base pitch/width/height according to elemMode and expandX/Y
 *
 *   @return
 *       N/A
-****************************************************************************************************
+***************************************************************************************************
 */
-VOID ElemLib::AdjustSurfaceInfo(
-    ElemMode        elemMode,       ///< [in] element mode
+VOID AddrElemLib::AdjustSurfaceInfo(
+    AddrElemMode    elemMode,       ///< [in] element mode
     UINT_32         expandX,        ///< [in] decompression expansion factor in X
     UINT_32         expandY,        ///< [in] decompression expansion factor in Y
-    UINT_32*        pBpp,           ///< [in,out] bpp
-    UINT_32*        pBasePitch,     ///< [in,out] base pitch
-    UINT_32*        pWidth,         ///< [in,out] width
-    UINT_32*        pHeight)        ///< [in,out] height
+    UINT_32*        pBpp,           ///< [in/out] bpp
+    UINT_32*        pBasePitch,     ///< [in/out] base pitch
+    UINT_32*        pWidth,         ///< [in/out] width
+    UINT_32*        pHeight)        ///< [in/out] height
 {
     UINT_32 packedBits;
     UINT_32 basePitch;
@@ -1172,14 +1165,8 @@ VOID ElemLib::AdjustSurfaceInfo(
             case ADDR_PACKED_BC3: // Fall through
             case ADDR_PACKED_BC5: // Fall through
                 bBCnFormat = TRUE;
-                // fall through
-            case ADDR_PACKED_ASTC:
-            case ADDR_PACKED_ETC2_128BPP:
                 packedBits = 128;
                 break;
-            case ADDR_PACKED_ETC2_64BPP:
-                packedBits = 64;
-                break;
             case ADDR_ROUND_BY_HALF:  // Fall through
             case ADDR_ROUND_TRUNCATE: // Fall through
             case ADDR_ROUND_DITHER:   // Fall through
@@ -1212,7 +1199,7 @@ VOID ElemLib::AdjustSurfaceInfo(
             else
             {
                 // Evergreen family workaround
-                if (bBCnFormat && (m_pAddrLib->GetChipFamily() == ADDR_CHIP_FAMILY_R8XX))
+                if (bBCnFormat && (m_pAddrLib->GetAddrChipFamily() == ADDR_CHIP_FAMILY_R8XX))
                 {
                     // For BCn we now pad it to POW2 at the beginning so it is safe to
                     // divide by 4 directly
@@ -1248,23 +1235,23 @@ VOID ElemLib::AdjustSurfaceInfo(
 }
 
 /**
-****************************************************************************************************
-*   ElemLib::RestoreSurfaceInfo
+***************************************************************************************************
+*   AddrElemLib::RestoreSurfaceInfo
 *
 *   @brief
 *       Reverse operation of AdjustSurfaceInfo
 *
 *   @return
 *       N/A
-****************************************************************************************************
+***************************************************************************************************
 */
-VOID ElemLib::RestoreSurfaceInfo(
-    ElemMode        elemMode,       ///< [in] element mode
+VOID AddrElemLib::RestoreSurfaceInfo(
+    AddrElemMode    elemMode,       ///< [in] element mode
     UINT_32         expandX,        ///< [in] decompression expansion factor in X
     UINT_32         expandY,        ///< [out] decompression expansion factor in Y
-    UINT_32*        pBpp,           ///< [in,out] bpp
-    UINT_32*        pWidth,         ///< [in,out] width
-    UINT_32*        pHeight)        ///< [in,out] height
+    UINT_32*        pBpp,           ///< [in/out] bpp
+    UINT_32*        pWidth,         ///< [in/out] width
+    UINT_32*        pHeight)        ///< [in/out] height
 {
     UINT_32 originalBits;
     UINT_32 width;
@@ -1289,14 +1276,7 @@ VOID ElemLib::RestoreSurfaceInfo(
             break;
         case ADDR_PACKED_GBGR:
         case ADDR_PACKED_BGRG:
-            if (m_pAddrLib->GetChipFamily() >= ADDR_CHIP_FAMILY_AI)
-            {
-                originalBits = bpp / expandX;
-            }
-            else
-            {
-                originalBits = bpp; // 32-bit packed ==> 2 32-bit result
-            }
+            originalBits = bpp; // 32-bit packed ==> 2 32-bit result
             break;
         case ADDR_PACKED_BC1: // Fall through
         case ADDR_PACKED_BC4:
@@ -1304,15 +1284,9 @@ VOID ElemLib::RestoreSurfaceInfo(
             break;
         case ADDR_PACKED_BC2: // Fall through
         case ADDR_PACKED_BC3: // Fall through
-        case ADDR_PACKED_BC5:
-            // fall through
-        case ADDR_PACKED_ASTC:
-        case ADDR_PACKED_ETC2_128BPP:
+            case ADDR_PACKED_BC5:
             originalBits = 128;
             break;
-        case ADDR_PACKED_ETC2_64BPP:
-            originalBits = 64;
-            break;
         case ADDR_ROUND_BY_HALF:  // Fall through
         case ADDR_ROUND_TRUNCATE: // Fall through
         case ADDR_ROUND_DITHER:   // Fall through
@@ -1353,8 +1327,8 @@ VOID ElemLib::RestoreSurfaceInfo(
 }
 
 /**
-****************************************************************************************************
-*   ElemLib::GetBitsPerPixel
+***************************************************************************************************
+*   AddrElemLib::GetBitsPerPixel
 *
 *   @brief
 *       Compute the total bits per element according to a format
@@ -1363,11 +1337,11 @@ VOID ElemLib::RestoreSurfaceInfo(
 *
 *   @return
 *       Bits per pixel
-****************************************************************************************************
+***************************************************************************************************
 */
-UINT_32 ElemLib::GetBitsPerPixel(
+UINT_32 AddrElemLib::GetBitsPerPixel(
     AddrFormat          format,         ///< [in] surface format code
-    ElemMode*           pElemMode,      ///< [out] element mode
+    AddrElemMode*       pElemMode,      ///< [out] element mode
     UINT_32*            pExpandX,       ///< [out] decompression expansion factor in X
     UINT_32*            pExpandY,       ///< [out] decompression expansion factor in Y
     UINT_32*            pUnusedBits)    ///< [out] bits unused
@@ -1376,7 +1350,7 @@ UINT_32 ElemLib::GetBitsPerPixel(
     UINT_32 expandX = 1;
     UINT_32 expandY = 1;
     UINT_32 bitUnused = 0;
-    ElemMode elemMode = ADDR_UNCOMPRESSED; // default value
+    AddrElemMode elemMode = ADDR_UNCOMPRESSED; // default value
 
     switch (format)
     {
@@ -1394,27 +1368,11 @@ UINT_32 ElemLib::GetBitsPerPixel(
             break;
         case ADDR_FMT_GB_GR: // treat as FMT_8_8
             elemMode = ADDR_PACKED_GBGR;
-            if (m_pAddrLib->GetChipFamily() >= ADDR_CHIP_FAMILY_AI)
-            {
-                bpp     = 32;
-                expandX = 2;
-            }
-            else
-            {
-                bpp     = 16;
-            }
+            bpp = 16;
             break;
         case ADDR_FMT_BG_RG: // treat as FMT_8_8
             elemMode = ADDR_PACKED_BGRG;
-            if (m_pAddrLib->GetChipFamily() >= ADDR_CHIP_FAMILY_AI)
-            {
-                bpp     = 32;
-                expandX = 2;
-            }
-            else
-            {
-                bpp     = 16;
-            }
+            bpp = 16;
             break;
         case ADDR_FMT_8_8_8_8:
         case ADDR_FMT_2_10_10_10:
@@ -1522,119 +1480,6 @@ UINT_32 ElemLib::GetBitsPerPixel(
             expandY = 4;
             bpp = 128;
             break;
-
-        case ADDR_FMT_ETC2_64BPP:
-            elemMode = ADDR_PACKED_ETC2_64BPP;
-            expandX  = 4;
-            expandY  = 4;
-            bpp      = 64;
-            break;
-
-        case ADDR_FMT_ETC2_128BPP:
-            elemMode = ADDR_PACKED_ETC2_128BPP;
-            expandX  = 4;
-            expandY  = 4;
-            bpp      = 128;
-            break;
-
-        case ADDR_FMT_ASTC_4x4:
-            elemMode = ADDR_PACKED_ASTC;
-            expandX  = 4;
-            expandY  = 4;
-            bpp      = 128;
-            break;
-
-        case ADDR_FMT_ASTC_5x4:
-            elemMode = ADDR_PACKED_ASTC;
-            expandX  = 5;
-            expandY  = 4;
-            bpp      = 128;
-            break;
-
-        case ADDR_FMT_ASTC_5x5:
-            elemMode = ADDR_PACKED_ASTC;
-            expandX  = 5;
-            expandY  = 5;
-            bpp      = 128;
-            break;
-
-        case ADDR_FMT_ASTC_6x5:
-            elemMode = ADDR_PACKED_ASTC;
-            expandX  = 6;
-            expandY  = 5;
-            bpp      = 128;
-            break;
-
-        case ADDR_FMT_ASTC_6x6:
-            elemMode = ADDR_PACKED_ASTC;
-            expandX  = 6;
-            expandY  = 6;
-            bpp      = 128;
-            break;
-
-        case ADDR_FMT_ASTC_8x5:
-            elemMode = ADDR_PACKED_ASTC;
-            expandX  = 8;
-            expandY  = 5;
-            bpp      = 128;
-            break;
-
-        case ADDR_FMT_ASTC_8x6:
-            elemMode = ADDR_PACKED_ASTC;
-            expandX  = 8;
-            expandY  = 6;
-            bpp      = 128;
-            break;
-
-        case ADDR_FMT_ASTC_8x8:
-            elemMode = ADDR_PACKED_ASTC;
-            expandX  = 8;
-            expandY  = 8;
-            bpp      = 128;
-            break;
-
-        case ADDR_FMT_ASTC_10x5:
-            elemMode = ADDR_PACKED_ASTC;
-            expandX  = 10;
-            expandY  = 5;
-            bpp      = 128;
-            break;
-
-        case ADDR_FMT_ASTC_10x6:
-            elemMode = ADDR_PACKED_ASTC;
-            expandX  = 10;
-            expandY  = 6;
-            bpp      = 128;
-            break;
-
-        case ADDR_FMT_ASTC_10x8:
-            elemMode = ADDR_PACKED_ASTC;
-            expandX  = 10;
-            expandY  = 8;
-            bpp      = 128;
-            break;
-
-        case ADDR_FMT_ASTC_10x10:
-            elemMode = ADDR_PACKED_ASTC;
-            expandX  = 10;
-            expandY  = 10;
-            bpp      = 128;
-            break;
-
-        case ADDR_FMT_ASTC_12x10:
-            elemMode = ADDR_PACKED_ASTC;
-            expandX  = 12;
-            expandY  = 10;
-            bpp      = 128;
-            break;
-
-        case ADDR_FMT_ASTC_12x12:
-            elemMode = ADDR_PACKED_ASTC;
-            expandX  = 12;
-            expandY  = 12;
-            bpp      = 128;
-            break;
-
         default:
             bpp = 0;
             ADDR_ASSERT_ALWAYS();
@@ -1651,23 +1496,23 @@ UINT_32 ElemLib::GetBitsPerPixel(
 }
 
 /**
-****************************************************************************************************
-*   ElemLib::GetCompBits
+***************************************************************************************************
+*   AddrElemLib::GetCompBits
 *
 *   @brief
 *       Set each component's bit size and bit start. And set element mode and number type
 *
 *   @return
 *       N/A
-****************************************************************************************************
+***************************************************************************************************
 */
-VOID ElemLib::GetCompBits(
-    UINT_32          c0,        ///< [in] bits of component 0
-    UINT_32          c1,        ///< [in] bits of component 1
-    UINT_32          c2,        ///< [in] bits of component 2
-    UINT_32          c3,        ///< [in] bits of component 3
-    PixelFormatInfo* pInfo,     ///< [out] per component info out
-    ElemMode         elemMode)  ///< [in] element mode
+VOID AddrElemLib::GetCompBits(
+    UINT_32 c0,                     ///< [in] bits of component 0
+    UINT_32 c1,                     ///< [in] bits of component 1
+    UINT_32 c2,                     ///< [in] bits of component 2
+    UINT_32 c3,                     ///< [in] bits of component 3
+    ADDR_PIXEL_FORMATINFO* pInfo,   ///< [out] per component info out
+    AddrElemMode elemMode)          ///< [in] element mode
 {
     pInfo->comps = 0;
 
@@ -1698,8 +1543,8 @@ VOID ElemLib::GetCompBits(
 }
 
 /**
-****************************************************************************************************
-*   ElemLib::GetCompBits
+***************************************************************************************************
+*   AddrElemLib::GetCompBits
 *
 *   @brief
 *       Set the clear color (or clear depth/stencil) for a surface
@@ -1710,10 +1555,10 @@ VOID ElemLib::GetCompBits(
 *
 *   @return
 *       N/A
-****************************************************************************************************
+***************************************************************************************************
 */
-VOID ElemLib::SetClearComps(
-    ADDR_FLT_32 comps[4],   ///< [in,out] components
+VOID AddrElemLib::SetClearComps(
+    ADDR_FLT_32 comps[4],   ///< [in/out] components
     BOOL_32 clearColor,     ///< [in] TRUE if clear color is set (CLEAR_COLOR)
     BOOL_32 float32)        ///< [in] TRUE if float32 component (BLEND_FLOAT32)
 {
@@ -1754,8 +1599,8 @@ VOID ElemLib::SetClearComps(
 }
 
 /**
-****************************************************************************************************
-*   ElemLib::IsBlockCompressed
+***************************************************************************************************
+*   AddrElemLib::IsBlockCompressed
 *
 *   @brief
 *       TRUE if this is block compressed format
@@ -1764,19 +1609,18 @@ VOID ElemLib::SetClearComps(
 *
 *   @return
 *       BOOL_32
-****************************************************************************************************
+***************************************************************************************************
 */
-BOOL_32 ElemLib::IsBlockCompressed(
+BOOL_32 AddrElemLib::IsBlockCompressed(
     AddrFormat format)  ///< [in] Format
 {
-    return (((format >= ADDR_FMT_BC1) && (format <= ADDR_FMT_BC7)) ||
-            ((format >= ADDR_FMT_ASTC_4x4) && (format <= ADDR_FMT_ETC2_128BPP)));
+    return format >= ADDR_FMT_BC1 && format <= ADDR_FMT_BC7;
 }
 
 
 /**
-****************************************************************************************************
-*   ElemLib::IsCompressed
+***************************************************************************************************
+*   AddrElemLib::IsCompressed
 *
 *   @brief
 *       TRUE if this is block compressed format or 1 bit format
@@ -1785,17 +1629,17 @@ BOOL_32 ElemLib::IsBlockCompressed(
 *
 *   @return
 *       BOOL_32
-****************************************************************************************************
+***************************************************************************************************
 */
-BOOL_32 ElemLib::IsCompressed(
+BOOL_32 AddrElemLib::IsCompressed(
     AddrFormat format)  ///< [in] Format
 {
     return IsBlockCompressed(format) || format == ADDR_FMT_BC1 || format == ADDR_FMT_BC7;
 }
 
 /**
-****************************************************************************************************
-*   ElemLib::IsExpand3x
+***************************************************************************************************
+*   AddrElemLib::IsExpand3x
 *
 *   @brief
 *       TRUE if this is 3x expand format
@@ -1804,9 +1648,9 @@ BOOL_32 ElemLib::IsCompressed(
 *
 *   @return
 *       BOOL_32
-****************************************************************************************************
+***************************************************************************************************
 */
-BOOL_32 ElemLib::IsExpand3x(
+BOOL_32 AddrElemLib::IsExpand3x(
     AddrFormat format)  ///< [in] Format
 {
     BOOL_32 is3x = FALSE;
@@ -1827,35 +1671,4 @@ BOOL_32 ElemLib::IsExpand3x(
     return is3x;
 }
 
-/**
-****************************************************************************************************
-*   ElemLib::IsMacroPixelPacked
-*
-*   @brief
-*       TRUE if this is a macro-pixel-packed format.
-*
-*   @note
-*
-*   @return
-*       BOOL_32
-****************************************************************************************************
-*/
-BOOL_32 ElemLib::IsMacroPixelPacked(
-    AddrFormat format)  ///< [in] Format
-{
-    BOOL_32 isMacroPixelPacked = FALSE;
 
-    switch (format)
-    {
-        case ADDR_FMT_BG_RG:
-        case ADDR_FMT_GB_GR:
-            isMacroPixelPacked = TRUE;
-            break;
-        default:
-            break;
-    }
-
-    return isMacroPixelPacked;
-}
-
-}

src/amd/addrlib/core/addrelemlib.h

@@ -25,10 +25,10 @@
  */
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 * @file  addrelemlib.h
-* @brief Contains the class for element/pixel related functions.
-****************************************************************************************************
+* @brief Contains the class for element/pixel related functions
+***************************************************************************************************
 */
 
 #ifndef __ELEM_LIB_H__
@@ -38,13 +38,10 @@
 #include "addrobject.h"
 #include "addrcommon.h"
 
-namespace Addr
-{
-
-class Lib;
+class AddrLib;
 
 // The masks for property bits within the Properties INT_32
-union ComponentFlags
+union ADDR_COMPONENT_FLAGS
 {
     struct
     {
@@ -56,8 +53,8 @@ union ComponentFlags
     UINT_32 value;
 };
 
-// Copy from legacy lib's NumberType
-enum NumberType
+// Copy from legacy lib's AddrNumberType
+enum AddrNumberType
 {
     // The following number types have the range [-1..1]
     ADDR_NO_NUMBER,         // This component doesn't exist and has no default value
@@ -112,38 +109,35 @@ enum NumberType
 };
 
 // Copy from legacy lib's AddrElement
-enum ElemMode
+enum AddrElemMode
 {
     // These formats allow both packing an unpacking
-    ADDR_ROUND_BY_HALF,      // add 1/2 and truncate when packing this element
-    ADDR_ROUND_TRUNCATE,     // truncate toward 0 for sign/mag, else toward neg
-    ADDR_ROUND_DITHER,       // Pack by dithering -- requires (x,y) position
+    ADDR_ROUND_BY_HALF,     // add 1/2 and truncate when packing this element
+    ADDR_ROUND_TRUNCATE,    // truncate toward 0 for sign/mag, else toward neg
+    ADDR_ROUND_DITHER,      // Pack by dithering -- requires (x,y) position
 
     // These formats only allow unpacking, no packing
-    ADDR_UNCOMPRESSED,       // Elements are not compressed: one data element per pixel/texel
-    ADDR_EXPANDED,           // Elements are split up and stored in multiple data elements
-    ADDR_PACKED_STD,         // Elements are compressed into ExpandX by ExpandY data elements
-    ADDR_PACKED_REV,         // Like ADDR_PACKED, but X order of pixels is reverved
-    ADDR_PACKED_GBGR,        // Elements are compressed 4:2:2 in G1B_G0R order (high to low)
-    ADDR_PACKED_BGRG,        // Elements are compressed 4:2:2 in BG1_RG0 order (high to low)
-    ADDR_PACKED_BC1,         // Each data element is uncompressed to a 4x4 pixel/texel array
-    ADDR_PACKED_BC2,         // Each data element is uncompressed to a 4x4 pixel/texel array
-    ADDR_PACKED_BC3,         // Each data element is uncompressed to a 4x4 pixel/texel array
-    ADDR_PACKED_BC4,         // Each data element is uncompressed to a 4x4 pixel/texel array
-    ADDR_PACKED_BC5,         // Each data element is uncompressed to a 4x4 pixel/texel array
-    ADDR_PACKED_ETC2_64BPP,  // ETC2 formats that use 64bpp to represent each 4x4 block
-    ADDR_PACKED_ETC2_128BPP, // ETC2 formats that use 128bpp to represent each 4x4 block
-    ADDR_PACKED_ASTC,        // Various ASTC formats, all are 128bpp with varying block sizes
+    ADDR_UNCOMPRESSED,      // Elements are not compressed: one data element per pixel/texel
+    ADDR_EXPANDED,          // Elements are split up and stored in multiple data elements
+    ADDR_PACKED_STD,        // Elements are compressed into ExpandX by ExpandY data elements
+    ADDR_PACKED_REV,        // Like ADDR_PACKED, but X order of pixels is reverved
+    ADDR_PACKED_GBGR,       // Elements are compressed 4:2:2 in G1B_G0R order (high to low)
+    ADDR_PACKED_BGRG,       // Elements are compressed 4:2:2 in BG1_RG0 order (high to low)
+    ADDR_PACKED_BC1,        // Each data element is uncompressed to a 4x4 pixel/texel array
+    ADDR_PACKED_BC2,        // Each data element is uncompressed to a 4x4 pixel/texel array
+    ADDR_PACKED_BC3,        // Each data element is uncompressed to a 4x4 pixel/texel array
+    ADDR_PACKED_BC4,        // Each data element is uncompressed to a 4x4 pixel/texel array
+    ADDR_PACKED_BC5,        // Each data element is uncompressed to a 4x4 pixel/texel array
 
     // These formats provide various kinds of compression
-    ADDR_ZPLANE_R5XX,        // Compressed Zplane using r5xx architecture format
-    ADDR_ZPLANE_R6XX,        // Compressed Zplane using r6xx architecture format
+    ADDR_ZPLANE_R5XX,       // Compressed Zplane using r5xx architecture format
+    ADDR_ZPLANE_R6XX,       // Compressed Zplane using r6xx architecture format
     //@@ Fill in the compression modes
 
-    ADDR_END_ELEMENT         // Used for range comparisons
+    ADDR_END_ELEMENT        // Used for range comparisons
 };
 
-enum DepthPlanarType
+enum AddrDepthPlanarType
 {
     ADDR_DEPTH_PLANAR_NONE = 0, // No plane z/stencl
     ADDR_DEPTH_PLANAR_R600 = 1, // R600 z and stencil planes are store within a tile
@@ -151,40 +145,40 @@ enum DepthPlanarType
 };
 
 /**
-****************************************************************************************************
-*   PixelFormatInfo
+***************************************************************************************************
+*   ADDR_PIXEL_FORMATINFO
 *
 *   @brief
 *       Per component info
 *
-****************************************************************************************************
+***************************************************************************************************
 */
-struct PixelFormatInfo
+struct ADDR_PIXEL_FORMATINFO
 {
     UINT_32             compBit[4];
-    NumberType          numType[4];
+    AddrNumberType      numType[4];
     UINT_32             compStart[4];
-    ElemMode            elemMode;
+    AddrElemMode        elemMode;
     UINT_32             comps;          ///< Number of components
 };
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 * @brief This class contains asic indepentent element related attributes and operations
-****************************************************************************************************
+***************************************************************************************************
 */
-class ElemLib : public Object
+class AddrElemLib : public AddrObject
 {
 protected:
-    ElemLib(Lib* pAddrLib);
+    AddrElemLib(AddrLib* const pAddrLib);
 
 public:
 
     /// Makes this class virtual
-    virtual ~ElemLib();
+    virtual ~AddrElemLib();
 
-    static ElemLib* Create(
-        const Lib* pAddrLib);
+    static AddrElemLib *Create(
+        const AddrLib* const pAddrLib);
 
     /// The implementation is only for R6xx/R7xx, so make it virtual in case we need for R8xx
     BOOL_32 PixGetExportNorm(
@@ -202,32 +196,32 @@ public:
         const ADDR_FLT_32 comps[4], UINT_8 *pPixel) const;
 
     static VOID    Flt32sToInt32s(
-        ADDR_FLT_32 value, UINT_32 bits, NumberType numberType, UINT_32* pResult);
+        ADDR_FLT_32 value, UINT_32 bits, AddrNumberType numberType, UINT_32* pResult);
 
     static VOID    Int32sToPixel(
         UINT_32 numComps, UINT_32* pComps, UINT_32* pCompBits, UINT_32* pCompStart,
-        ComponentFlags properties, UINT_32 resultBits, UINT_8* pPixel);
+        ADDR_COMPONENT_FLAGS properties, UINT_32 resultBits, UINT_8* pPixel);
 
     VOID    PixGetColorCompInfo(
         AddrColorFormat format, AddrSurfaceNumber number, AddrSurfaceSwap swap,
-        PixelFormatInfo* pInfo) const;
+        ADDR_PIXEL_FORMATINFO* pInfo) const;
 
     VOID    PixGetDepthCompInfo(
-        AddrDepthFormat format, PixelFormatInfo* pInfo) const;
+        AddrDepthFormat format, ADDR_PIXEL_FORMATINFO* pInfo) const;
 
     UINT_32 GetBitsPerPixel(
-        AddrFormat format, ElemMode* pElemMode = NULL,
+        AddrFormat format, AddrElemMode* pElemMode,
         UINT_32* pExpandX = NULL, UINT_32* pExpandY = NULL, UINT_32* pBitsUnused = NULL);
 
     static VOID    SetClearComps(
         ADDR_FLT_32 comps[4], BOOL_32 clearColor, BOOL_32 float32);
 
     VOID    AdjustSurfaceInfo(
-        ElemMode elemMode, UINT_32 expandX, UINT_32 expandY,
+        AddrElemMode elemMode, UINT_32 expandX, UINT_32 expandY,
         UINT_32* pBpp, UINT_32* pBasePitch, UINT_32* pWidth, UINT_32* pHeight);
 
     VOID    RestoreSurfaceInfo(
-        ElemMode elemMode, UINT_32 expandX, UINT_32 expandY,
+        AddrElemMode elemMode, UINT_32 expandX, UINT_32 expandY,
         UINT_32* pBpp, UINT_32* pWidth, UINT_32* pHeight);
 
     /// Checks if depth and stencil are planar inside a tile
@@ -237,7 +231,7 @@ public:
     }
 
     /// Sets m_configFlags, copied from AddrLib
-    VOID    SetConfigFlags(ConfigFlags flags)
+    VOID    SetConfigFlags(ADDR_CONFIG_FLAGS flags)
     {
         m_configFlags = flags;
     }
@@ -245,35 +239,32 @@ public:
     static BOOL_32 IsCompressed(AddrFormat format);
     static BOOL_32 IsBlockCompressed(AddrFormat format);
     static BOOL_32 IsExpand3x(AddrFormat format);
-    static BOOL_32 IsMacroPixelPacked(AddrFormat format);
 
 protected:
 
     static VOID    GetCompBits(
         UINT_32 c0, UINT_32 c1, UINT_32 c2, UINT_32 c3,
-        PixelFormatInfo* pInfo,
-        ElemMode elemMode = ADDR_ROUND_BY_HALF);
+        ADDR_PIXEL_FORMATINFO* pInfo,
+        AddrElemMode elemMode = ADDR_ROUND_BY_HALF);
 
     static VOID    GetCompType(
         AddrColorFormat format, AddrSurfaceNumber numType,
-        PixelFormatInfo* pInfo);
+        ADDR_PIXEL_FORMATINFO* pInfo);
 
     static VOID    GetCompSwap(
-        AddrSurfaceSwap swap, PixelFormatInfo* pInfo);
+        AddrSurfaceSwap swap, ADDR_PIXEL_FORMATINFO* pInfo);
 
     static VOID    SwapComps(
-        UINT_32 c0, UINT_32 c1, PixelFormatInfo* pInfo);
+        UINT_32 c0, UINT_32 c1, ADDR_PIXEL_FORMATINFO* pInfo);
 
 private:
 
     UINT_32             m_fp16ExportNorm;   ///< If allow FP16 to be reported as EXPORT_NORM
-    DepthPlanarType     m_depthPlanarType;
+    AddrDepthPlanarType m_depthPlanarType;
 
-    ConfigFlags         m_configFlags;      ///< Copy of AddrLib's configFlags
-    Addr::Lib* const    m_pAddrLib;         ///< Pointer to parent addrlib instance
+    ADDR_CONFIG_FLAGS   m_configFlags;      ///< Copy of AddrLib's configFlags
+    AddrLib* const      m_pAddrLib;         ///< Pointer to parent addrlib instance
 };
 
-} //Addr
-
 #endif
 

src/amd/addrlib/core/addrlib.h

@@ -25,15 +25,16 @@
  */
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 * @file  addrlib.h
-* @brief Contains the Addr::Lib base class definition.
-****************************************************************************************************
+* @brief Contains the AddrLib base class definition.
+***************************************************************************************************
 */
 
 #ifndef __ADDR_LIB_H__
 #define __ADDR_LIB_H__
 
+
 #include "addrinterface.h"
 #include "addrobject.h"
 #include "addrelemlib.h"
@@ -56,32 +57,26 @@
 #define CIASICIDGFXENGINE_SOUTHERNISLAND 0x0000000A
 #endif
 
-#ifndef CIASICIDGFXENGINE_ARCTICISLAND
-#define CIASICIDGFXENGINE_ARCTICISLAND 0x0000000D
+#ifndef CIASICIDGFXENGINE_SEAISLAND
+#define CIASICIDGFXENGINE_SEAISLAND 0x0000000B
 #endif
-
-namespace Addr
-{
-
 /**
-****************************************************************************************************
+***************************************************************************************************
 * @brief Neutral enums that define pipeinterleave
-****************************************************************************************************
+***************************************************************************************************
 */
-enum PipeInterleave
+enum AddrPipeInterleave
 {
     ADDR_PIPEINTERLEAVE_256B = 256,
     ADDR_PIPEINTERLEAVE_512B = 512,
-    ADDR_PIPEINTERLEAVE_1KB  = 1024,
-    ADDR_PIPEINTERLEAVE_2KB  = 2048,
 };
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 * @brief Neutral enums that define DRAM row size
-****************************************************************************************************
+***************************************************************************************************
 */
-enum RowSize
+enum AddrRowSize
 {
     ADDR_ROWSIZE_1KB = 1024,
     ADDR_ROWSIZE_2KB = 2048,
@@ -90,11 +85,11 @@ enum RowSize
 };
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 * @brief Neutral enums that define bank interleave
-****************************************************************************************************
+***************************************************************************************************
 */
-enum BankInterleave
+enum AddrBankInterleave
 {
     ADDR_BANKINTERLEAVE_1 = 1,
     ADDR_BANKINTERLEAVE_2 = 2,
@@ -103,22 +98,35 @@ enum BankInterleave
 };
 
 /**
-****************************************************************************************************
-* @brief Neutral enums that define shader engine tile size
-****************************************************************************************************
+***************************************************************************************************
+* @brief Neutral enums that define MGPU chip tile size
+***************************************************************************************************
 */
-enum ShaderEngineTileSize
+enum AddrChipTileSize
+{
+    ADDR_CHIPTILESIZE_16 = 16,
+    ADDR_CHIPTILESIZE_32 = 32,
+    ADDR_CHIPTILESIZE_64 = 64,
+    ADDR_CHIPTILESIZE_128 = 128,
+};
+
+/**
+***************************************************************************************************
+* @brief Neutral enums that define shader engine tile size
+***************************************************************************************************
+*/
+enum AddrEngTileSize
 {
     ADDR_SE_TILESIZE_16 = 16,
     ADDR_SE_TILESIZE_32 = 32,
 };
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 * @brief Neutral enums that define bank swap size
-****************************************************************************************************
+***************************************************************************************************
 */
-enum BankSwapSize
+enum AddrBankSwapSize
 {
     ADDR_BANKSWAP_128B = 128,
     ADDR_BANKSWAP_256B = 256,
@@ -127,14 +135,44 @@ enum BankSwapSize
 };
 
 /**
-****************************************************************************************************
-* @brief This class contains asic independent address lib functionalities
-****************************************************************************************************
+***************************************************************************************************
+* @brief Neutral enums that define bank swap size
+***************************************************************************************************
 */
-class Lib : public Object
+enum AddrSampleSplitSize
+{
+    ADDR_SAMPLESPLIT_1KB = 1024,
+    ADDR_SAMPLESPLIT_2KB = 2048,
+    ADDR_SAMPLESPLIT_4KB = 4096,
+    ADDR_SAMPLESPLIT_8KB = 8192,
+};
+
+/**
+***************************************************************************************************
+* @brief Flags for AddrTileMode
+***************************************************************************************************
+*/
+struct AddrTileModeFlags
+{
+    UINT_32 thickness       : 4;
+    UINT_32 isLinear        : 1;
+    UINT_32 isMicro         : 1;
+    UINT_32 isMacro         : 1;
+    UINT_32 isMacro3d       : 1;
+    UINT_32 isPrt           : 1;
+    UINT_32 isPrtNoRotation : 1;
+    UINT_32 isBankSwapped   : 1;
+};
+
+/**
+***************************************************************************************************
+* @brief This class contains asic independent address lib functionalities
+***************************************************************************************************
+*/
+class AddrLib : public AddrObject
 {
 public:
-    virtual ~Lib();
+    virtual ~AddrLib();
 
     static ADDR_E_RETURNCODE Create(
         const ADDR_CREATE_INPUT* pCreateInfo, ADDR_CREATE_OUTPUT* pCreateOut);
@@ -145,7 +183,8 @@ public:
         delete this;
     }
 
-    static Lib* GetLib(ADDR_HANDLE hLib);
+    static AddrLib* GetAddrLib(
+        ADDR_HANDLE hLib);
 
     /// Returns AddrLib version (from compiled binary instead include file)
     UINT_32 GetVersion()
@@ -154,11 +193,114 @@ public:
     }
 
     /// Returns asic chip family name defined by AddrLib
-    ChipFamily GetChipFamily()
+    AddrChipFamily GetAddrChipFamily()
     {
         return m_chipFamily;
     }
 
+    /// Returns tileIndex support
+    BOOL_32 UseTileIndex(INT_32 index) const
+    {
+        return m_configFlags.useTileIndex && (index != TileIndexInvalid);
+    }
+
+    /// Returns combined swizzle support
+    BOOL_32 UseCombinedSwizzle() const
+    {
+        return m_configFlags.useCombinedSwizzle;
+    }
+
+    //
+    // Interface stubs
+    //
+    ADDR_E_RETURNCODE ComputeSurfaceInfo(
+        const ADDR_COMPUTE_SURFACE_INFO_INPUT* pIn,
+        ADDR_COMPUTE_SURFACE_INFO_OUTPUT* pOut) const;
+
+    ADDR_E_RETURNCODE ComputeSurfaceAddrFromCoord(
+        const ADDR_COMPUTE_SURFACE_ADDRFROMCOORD_INPUT* pIn,
+        ADDR_COMPUTE_SURFACE_ADDRFROMCOORD_OUTPUT* pOut) const;
+
+    ADDR_E_RETURNCODE ComputeSurfaceCoordFromAddr(
+        const ADDR_COMPUTE_SURFACE_COORDFROMADDR_INPUT*  pIn,
+        ADDR_COMPUTE_SURFACE_COORDFROMADDR_OUTPUT* pOut) const;
+
+    ADDR_E_RETURNCODE ComputeSliceTileSwizzle(
+        const ADDR_COMPUTE_SLICESWIZZLE_INPUT*  pIn,
+        ADDR_COMPUTE_SLICESWIZZLE_OUTPUT* pOut) const;
+
+    ADDR_E_RETURNCODE ExtractBankPipeSwizzle(
+        const ADDR_EXTRACT_BANKPIPE_SWIZZLE_INPUT* pIn,
+        ADDR_EXTRACT_BANKPIPE_SWIZZLE_OUTPUT* pOut) const;
+
+    ADDR_E_RETURNCODE CombineBankPipeSwizzle(
+        const ADDR_COMBINE_BANKPIPE_SWIZZLE_INPUT*  pIn,
+        ADDR_COMBINE_BANKPIPE_SWIZZLE_OUTPUT* pOut) const;
+
+    ADDR_E_RETURNCODE ComputeBaseSwizzle(
+        const ADDR_COMPUTE_BASE_SWIZZLE_INPUT*  pIn,
+        ADDR_COMPUTE_BASE_SWIZZLE_OUTPUT* pOut) const;
+
+    ADDR_E_RETURNCODE ComputeFmaskInfo(
+        const ADDR_COMPUTE_FMASK_INFO_INPUT*  pIn,
+        ADDR_COMPUTE_FMASK_INFO_OUTPUT* pOut);
+
+    ADDR_E_RETURNCODE ComputeFmaskAddrFromCoord(
+        const ADDR_COMPUTE_FMASK_ADDRFROMCOORD_INPUT*  pIn,
+        ADDR_COMPUTE_FMASK_ADDRFROMCOORD_OUTPUT* pOut) const;
+
+    ADDR_E_RETURNCODE ComputeFmaskCoordFromAddr(
+        const ADDR_COMPUTE_FMASK_COORDFROMADDR_INPUT*  pIn,
+        ADDR_COMPUTE_FMASK_COORDFROMADDR_OUTPUT* pOut) const;
+
+    ADDR_E_RETURNCODE ConvertTileInfoToHW(
+        const ADDR_CONVERT_TILEINFOTOHW_INPUT* pIn,
+        ADDR_CONVERT_TILEINFOTOHW_OUTPUT* pOut) const;
+
+    ADDR_E_RETURNCODE ConvertTileIndex(
+        const ADDR_CONVERT_TILEINDEX_INPUT* pIn,
+        ADDR_CONVERT_TILEINDEX_OUTPUT* pOut) const;
+
+    ADDR_E_RETURNCODE ConvertTileIndex1(
+        const ADDR_CONVERT_TILEINDEX1_INPUT* pIn,
+        ADDR_CONVERT_TILEINDEX_OUTPUT* pOut) const;
+
+    ADDR_E_RETURNCODE GetTileIndex(
+        const ADDR_GET_TILEINDEX_INPUT* pIn,
+        ADDR_GET_TILEINDEX_OUTPUT* pOut) const;
+
+    ADDR_E_RETURNCODE ComputeHtileInfo(
+        const ADDR_COMPUTE_HTILE_INFO_INPUT* pIn,
+        ADDR_COMPUTE_HTILE_INFO_OUTPUT* pOut) const;
+
+    ADDR_E_RETURNCODE ComputeCmaskInfo(
+        const ADDR_COMPUTE_CMASK_INFO_INPUT* pIn,
+        ADDR_COMPUTE_CMASK_INFO_OUTPUT* pOut) const;
+
+    ADDR_E_RETURNCODE ComputeDccInfo(
+        const ADDR_COMPUTE_DCCINFO_INPUT* pIn,
+        ADDR_COMPUTE_DCCINFO_OUTPUT* pOut) const;
+
+    ADDR_E_RETURNCODE ComputeHtileAddrFromCoord(
+        const ADDR_COMPUTE_HTILE_ADDRFROMCOORD_INPUT*  pIn,
+        ADDR_COMPUTE_HTILE_ADDRFROMCOORD_OUTPUT* pOut) const;
+
+    ADDR_E_RETURNCODE ComputeCmaskAddrFromCoord(
+        const ADDR_COMPUTE_CMASK_ADDRFROMCOORD_INPUT*  pIn,
+        ADDR_COMPUTE_CMASK_ADDRFROMCOORD_OUTPUT* pOut) const;
+
+    ADDR_E_RETURNCODE ComputeHtileCoordFromAddr(
+        const ADDR_COMPUTE_HTILE_COORDFROMADDR_INPUT*  pIn,
+        ADDR_COMPUTE_HTILE_COORDFROMADDR_OUTPUT* pOut) const;
+
+    ADDR_E_RETURNCODE ComputeCmaskCoordFromAddr(
+        const ADDR_COMPUTE_CMASK_COORDFROMADDR_INPUT*  pIn,
+        ADDR_COMPUTE_CMASK_COORDFROMADDR_OUTPUT* pOut) const;
+
+    ADDR_E_RETURNCODE ComputePrtInfo(
+        const ADDR_PRT_INFO_INPUT*  pIn,
+        ADDR_PRT_INFO_OUTPUT*       pOut) const;
+
     ADDR_E_RETURNCODE Flt32ToDepthPixel(
         const ELEM_FLT32TODEPTHPIXEL_INPUT* pIn,
         ELEM_FLT32TODEPTHPIXEL_OUTPUT* pOut) const;
@@ -167,104 +309,387 @@ public:
         const ELEM_FLT32TOCOLORPIXEL_INPUT* pIn,
         ELEM_FLT32TOCOLORPIXEL_OUTPUT* pOut) const;
 
-    BOOL_32 GetExportNorm(const ELEM_GETEXPORTNORM_INPUT* pIn) const;
-
-    ADDR_E_RETURNCODE GetMaxAlignments(ADDR_GET_MAX_ALINGMENTS_OUTPUT* pOut) const;
+    BOOL_32 GetExportNorm(
+        const ELEM_GETEXPORTNORM_INPUT* pIn) const;
 
 protected:
-    Lib();  // Constructor is protected
-    Lib(const Client* pClient);
+    AddrLib();  // Constructor is protected
+    AddrLib(const AddrClient* pClient);
 
-    /// Pure virtual function to get max alignments
-    virtual ADDR_E_RETURNCODE HwlGetMaxAlignments(ADDR_GET_MAX_ALINGMENTS_OUTPUT* pOut) const = 0;
+    /// Pure Virtual function for Hwl computing surface info
+    virtual ADDR_E_RETURNCODE HwlComputeSurfaceInfo(
+        const ADDR_COMPUTE_SURFACE_INFO_INPUT* pIn,
+        ADDR_COMPUTE_SURFACE_INFO_OUTPUT* pOut) const = 0;
+
+    /// Pure Virtual function for Hwl computing surface address from coord
+    virtual ADDR_E_RETURNCODE HwlComputeSurfaceAddrFromCoord(
+        const ADDR_COMPUTE_SURFACE_ADDRFROMCOORD_INPUT* pIn,
+        ADDR_COMPUTE_SURFACE_ADDRFROMCOORD_OUTPUT* pOut) const = 0;
+
+    /// Pure Virtual function for Hwl computing surface coord from address
+    virtual ADDR_E_RETURNCODE HwlComputeSurfaceCoordFromAddr(
+        const ADDR_COMPUTE_SURFACE_COORDFROMADDR_INPUT* pIn,
+        ADDR_COMPUTE_SURFACE_COORDFROMADDR_OUTPUT* pOut) const = 0;
+
+    /// Pure Virtual function for Hwl computing surface tile swizzle
+    virtual ADDR_E_RETURNCODE HwlComputeSliceTileSwizzle(
+        const ADDR_COMPUTE_SLICESWIZZLE_INPUT* pIn,
+        ADDR_COMPUTE_SLICESWIZZLE_OUTPUT* pOut) const = 0;
+
+    /// Pure Virtual function for Hwl extracting bank/pipe swizzle from base256b
+    virtual ADDR_E_RETURNCODE HwlExtractBankPipeSwizzle(
+        const ADDR_EXTRACT_BANKPIPE_SWIZZLE_INPUT* pIn,
+        ADDR_EXTRACT_BANKPIPE_SWIZZLE_OUTPUT* pOut) const = 0;
+
+    /// Pure Virtual function for Hwl combining bank/pipe swizzle
+    virtual ADDR_E_RETURNCODE HwlCombineBankPipeSwizzle(
+        UINT_32 bankSwizzle, UINT_32 pipeSwizzle, ADDR_TILEINFO*  pTileInfo,
+        UINT_64 baseAddr, UINT_32* pTileSwizzle) const = 0;
+
+    /// Pure Virtual function for Hwl computing base swizzle
+    virtual ADDR_E_RETURNCODE HwlComputeBaseSwizzle(
+        const ADDR_COMPUTE_BASE_SWIZZLE_INPUT* pIn,
+        ADDR_COMPUTE_BASE_SWIZZLE_OUTPUT* pOut) const = 0;
+
+    /// Pure Virtual function for Hwl computing HTILE base align
+    virtual UINT_32 HwlComputeHtileBaseAlign(
+        BOOL_32 isTcCompatible, BOOL_32 isLinear, ADDR_TILEINFO* pTileInfo) const = 0;
+
+    /// Pure Virtual function for Hwl computing HTILE bpp
+    virtual UINT_32 HwlComputeHtileBpp(
+        BOOL_32 isWidth8, BOOL_32 isHeight8) const = 0;
+
+    /// Pure Virtual function for Hwl computing HTILE bytes
+    virtual UINT_64 HwlComputeHtileBytes(
+        UINT_32 pitch, UINT_32 height, UINT_32 bpp,
+        BOOL_32 isLinear, UINT_32 numSlices, UINT_64* pSliceBytes, UINT_32 baseAlign) const = 0;
+
+    /// Pure Virtual function for Hwl computing FMASK info
+    virtual ADDR_E_RETURNCODE HwlComputeFmaskInfo(
+        const ADDR_COMPUTE_FMASK_INFO_INPUT* pIn,
+        ADDR_COMPUTE_FMASK_INFO_OUTPUT* pOut) = 0;
+
+    /// Pure Virtual function for Hwl FMASK address from coord
+    virtual ADDR_E_RETURNCODE HwlComputeFmaskAddrFromCoord(
+        const ADDR_COMPUTE_FMASK_ADDRFROMCOORD_INPUT* pIn,
+        ADDR_COMPUTE_FMASK_ADDRFROMCOORD_OUTPUT* pOut) const = 0;
+
+    /// Pure Virtual function for Hwl FMASK coord from address
+    virtual ADDR_E_RETURNCODE HwlComputeFmaskCoordFromAddr(
+        const ADDR_COMPUTE_FMASK_COORDFROMADDR_INPUT* pIn,
+        ADDR_COMPUTE_FMASK_COORDFROMADDR_OUTPUT* pOut) const = 0;
+
+    /// Pure Virtual function for Hwl convert tile info from real value to HW value
+    virtual ADDR_E_RETURNCODE HwlConvertTileInfoToHW(
+        const ADDR_CONVERT_TILEINFOTOHW_INPUT* pIn,
+        ADDR_CONVERT_TILEINFOTOHW_OUTPUT* pOut) const = 0;
+
+    /// Pure Virtual function for Hwl compute mipmap info
+    virtual BOOL_32 HwlComputeMipLevel(
+        ADDR_COMPUTE_SURFACE_INFO_INPUT* pIn) const = 0;
+
+    /// Pure Virtual function for Hwl compute max cmask blockMax value
+    virtual BOOL_32 HwlGetMaxCmaskBlockMax() const = 0;
+
+    /// Pure Virtual function for Hwl compute fmask bits
+    virtual UINT_32 HwlComputeFmaskBits(
+        const ADDR_COMPUTE_FMASK_INFO_INPUT* pIn,
+        UINT_32* pNumSamples) const = 0;
+
+    /// Virtual function to get index (not pure then no need to implement this in all hwls
+    virtual ADDR_E_RETURNCODE HwlGetTileIndex(
+        const ADDR_GET_TILEINDEX_INPUT* pIn,
+        ADDR_GET_TILEINDEX_OUTPUT*      pOut) const
+    {
+        return ADDR_NOTSUPPORTED;
+    }
+
+    /// Virtual function for Hwl to compute Dcc info
+    virtual ADDR_E_RETURNCODE HwlComputeDccInfo(
+        const ADDR_COMPUTE_DCCINFO_INPUT* pIn,
+        ADDR_COMPUTE_DCCINFO_OUTPUT* pOut) const
+    {
+        return ADDR_NOTSUPPORTED;
+    }
+
+    /// Virtual function to get cmask address for tc compatible cmask
+    virtual ADDR_E_RETURNCODE HwlComputeCmaskAddrFromCoord(
+        const ADDR_COMPUTE_CMASK_ADDRFROMCOORD_INPUT* pIn,
+        ADDR_COMPUTE_CMASK_ADDRFROMCOORD_OUTPUT* pOut) const
+    {
+        return ADDR_NOTSUPPORTED;
+    }
+    // Compute attributes
+
+    // HTILE
+    UINT_32    ComputeHtileInfo(
+        ADDR_HTILE_FLAGS flags,
+        UINT_32 pitchIn, UINT_32 heightIn, UINT_32 numSlices,
+        BOOL_32 isLinear, BOOL_32 isWidth8, BOOL_32 isHeight8,
+        ADDR_TILEINFO*  pTileInfo,
+        UINT_32* pPitchOut, UINT_32* pHeightOut, UINT_64* pHtileBytes,
+        UINT_32* pMacroWidth = NULL, UINT_32* pMacroHeight = NULL,
+        UINT_64* pSliceSize = NULL, UINT_32* pBaseAlign = NULL) const;
+
+    // CMASK
+    ADDR_E_RETURNCODE ComputeCmaskInfo(
+        ADDR_CMASK_FLAGS flags,
+        UINT_32 pitchIn, UINT_32 heightIn, UINT_32 numSlices, BOOL_32 isLinear,
+        ADDR_TILEINFO* pTileInfo, UINT_32* pPitchOut, UINT_32* pHeightOut, UINT_64* pCmaskBytes,
+        UINT_32* pMacroWidth, UINT_32* pMacroHeight, UINT_64* pSliceSize = NULL,
+        UINT_32* pBaseAlign = NULL, UINT_32* pBlockMax = NULL) const;
+
+    virtual VOID HwlComputeTileDataWidthAndHeightLinear(
+        UINT_32* pMacroWidth, UINT_32* pMacroHeight,
+        UINT_32 bpp, ADDR_TILEINFO* pTileInfo) const;
+
+    // CMASK & HTILE addressing
+    virtual UINT_64 HwlComputeXmaskAddrFromCoord(
+        UINT_32 pitch, UINT_32 height, UINT_32 x, UINT_32 y, UINT_32 slice,
+        UINT_32 numSlices, UINT_32 factor, BOOL_32 isLinear, BOOL_32 isWidth8,
+        BOOL_32 isHeight8, ADDR_TILEINFO* pTileInfo,
+        UINT_32* bitPosition) const;
+
+    virtual VOID HwlComputeXmaskCoordFromAddr(
+        UINT_64 addr, UINT_32 bitPosition, UINT_32 pitch, UINT_32 height, UINT_32 numSlices,
+        UINT_32 factor, BOOL_32 isLinear, BOOL_32 isWidth8, BOOL_32 isHeight8,
+        ADDR_TILEINFO* pTileInfo, UINT_32* pX, UINT_32* pY, UINT_32* pSlice) const;
+
+    // Surface mipmap
+    VOID    ComputeMipLevel(
+        ADDR_COMPUTE_SURFACE_INFO_INPUT* pIn) const;
+
+    /// Pure Virtual function for Hwl checking degrade for base level
+    virtual BOOL_32 HwlDegradeBaseLevel(
+        const ADDR_COMPUTE_SURFACE_INFO_INPUT* pIn) const = 0;
+
+    virtual BOOL_32 HwlOverrideTileMode(
+        const ADDR_COMPUTE_SURFACE_INFO_INPUT* pIn,
+        AddrTileMode* pTileMode,
+        AddrTileType* pTileType) const
+    {
+        // not supported in hwl layer, FALSE for not-overrided
+        return FALSE;
+    }
+
+    AddrTileMode DegradeLargeThickTile(AddrTileMode tileMode, UINT_32 bpp) const;
+
+    VOID PadDimensions(
+        AddrTileMode tileMode, UINT_32 bpp, ADDR_SURFACE_FLAGS flags,
+        UINT_32 numSamples, ADDR_TILEINFO* pTileInfo, UINT_32 padDims, UINT_32 mipLevel,
+        UINT_32* pPitch, UINT_32 pitchAlign, UINT_32* pHeight, UINT_32 heightAlign,
+        UINT_32* pSlices, UINT_32 sliceAlign) const;
+
+    virtual VOID HwlPadDimensions(
+        AddrTileMode tileMode, UINT_32 bpp, ADDR_SURFACE_FLAGS flags,
+        UINT_32 numSamples, ADDR_TILEINFO* pTileInfo, UINT_32 padDims, UINT_32 mipLevel,
+        UINT_32* pPitch, UINT_32 pitchAlign, UINT_32* pHeight, UINT_32 heightAlign,
+        UINT_32* pSlices, UINT_32 sliceAlign) const
+    {
+    }
+
+    //
+    // Addressing shared for linear/1D tiling
+    //
+    UINT_64 ComputeSurfaceAddrFromCoordLinear(
+        UINT_32 x, UINT_32 y, UINT_32 slice, UINT_32 sample,
+        UINT_32 bpp, UINT_32 pitch, UINT_32 height, UINT_32 numSlices,
+        UINT_32* pBitPosition) const;
+
+    VOID    ComputeSurfaceCoordFromAddrLinear(
+        UINT_64 addr, UINT_32 bitPosition, UINT_32 bpp,
+        UINT_32 pitch, UINT_32 height, UINT_32 numSlices,
+        UINT_32* pX, UINT_32* pY, UINT_32* pSlice, UINT_32* pSample) const;
+
+    VOID    ComputeSurfaceCoordFromAddrMicroTiled(
+        UINT_64 addr, UINT_32 bitPosition,
+        UINT_32 bpp, UINT_32 pitch, UINT_32 height, UINT_32 numSamples,
+        AddrTileMode tileMode, UINT_32 tileBase, UINT_32 compBits,
+        UINT_32* pX, UINT_32* pY, UINT_32* pSlice, UINT_32* pSample,
+        AddrTileType microTileType, BOOL_32 isDepthSampleOrder) const;
+
+    UINT_32 ComputePixelIndexWithinMicroTile(
+        UINT_32 x, UINT_32 y, UINT_32 z,
+        UINT_32 bpp, AddrTileMode tileMode, AddrTileType microTileType) const;
+
+    /// Pure Virtual function for Hwl computing coord from offset inside micro tile
+    virtual VOID HwlComputePixelCoordFromOffset(
+        UINT_32 offset, UINT_32 bpp, UINT_32 numSamples,
+        AddrTileMode tileMode, UINT_32 tileBase, UINT_32 compBits,
+        UINT_32* pX, UINT_32* pY, UINT_32* pSlice, UINT_32* pSample,
+        AddrTileType microTileType, BOOL_32 isDepthSampleOrder) const = 0;
+
+    //
+    // Addressing shared by all
+    //
+    virtual UINT_32 HwlGetPipes(
+        const ADDR_TILEINFO* pTileInfo) const;
+
+    UINT_32 ComputePipeFromAddr(
+        UINT_64 addr, UINT_32 numPipes) const;
+
+    /// Pure Virtual function for Hwl computing pipe from coord
+    virtual UINT_32 ComputePipeFromCoord(
+        UINT_32 x, UINT_32 y, UINT_32 slice, AddrTileMode tileMode,
+        UINT_32 pipeSwizzle, BOOL_32 flags, ADDR_TILEINFO* pTileInfo) const = 0;
+
+    /// Pure Virtual function for Hwl computing coord Y for 8 pipe cmask/htile
+    virtual UINT_32 HwlComputeXmaskCoordYFrom8Pipe(
+        UINT_32 pipe, UINT_32 x) const = 0;
 
     //
     // Initialization
     //
     /// Pure Virtual function for Hwl computing internal global parameters from h/w registers
-    virtual BOOL_32 HwlInitGlobalParams(const ADDR_CREATE_INPUT* pCreateIn) = 0;
+    virtual BOOL_32 HwlInitGlobalParams(
+        const ADDR_CREATE_INPUT* pCreateIn) = 0;
 
     /// Pure Virtual function for Hwl converting chip family
-    virtual ChipFamily HwlConvertChipFamily(UINT_32 uChipFamily, UINT_32 uChipRevision) = 0;
-
-    /// Get equation table pointer and number of equations
-    virtual UINT_32 HwlGetEquationTableInfo(const ADDR_EQUATION** ppEquationTable) const
-    {
-        *ppEquationTable = NULL;
-
-        return 0;
-    }
+    virtual AddrChipFamily HwlConvertChipFamily(UINT_32 uChipFamily, UINT_32 uChipRevision) = 0;
 
     //
     // Misc helper
     //
-    static UINT_32 Bits2Number(UINT_32 bitNum, ...);
+    static const AddrTileModeFlags m_modeFlags[ADDR_TM_COUNT];
+
+    static UINT_32 ComputeSurfaceThickness(
+        AddrTileMode tileMode);
+
+    // Checking tile mode
+    static BOOL_32 IsMacroTiled(AddrTileMode tileMode);
+    static BOOL_32 IsMacro3dTiled(AddrTileMode tileMode);
+    static BOOL_32 IsLinear(AddrTileMode tileMode);
+    static BOOL_32 IsMicroTiled(AddrTileMode tileMode);
+    static BOOL_32 IsPrtTileMode(AddrTileMode tileMode);
+    static BOOL_32 IsPrtNoRotationTileMode(AddrTileMode tileMode);
+
+    static UINT_32 Bits2Number(UINT_32 bitNum,...);
 
     static UINT_32 GetNumFragments(UINT_32 numSamples, UINT_32 numFrags)
     {
-        return (numFrags != 0) ? numFrags : Max(1u, numSamples);
+        return numFrags != 0 ? numFrags : Max(1u, numSamples);
     }
 
-    /// Returns pointer of ElemLib
-    ElemLib* GetElemLib() const
+    /// Returns pointer of AddrElemLib
+    AddrElemLib* GetElemLib() const
     {
         return m_pElemLib;
     }
 
+    /// Return TRUE if tile info is needed
+    BOOL_32 UseTileInfo() const
+    {
+        return !m_configFlags.ignoreTileInfo;
+    }
+
     /// Returns fillSizeFields flag
     UINT_32 GetFillSizeFieldsFlags() const
     {
         return m_configFlags.fillSizeFields;
     }
 
+    /// Adjusts pitch alignment for flipping surface
+    VOID    AdjustPitchAlignment(
+        ADDR_SURFACE_FLAGS flags, UINT_32* pPitchAlign) const;
+
+    /// Overwrite tile config according to tile index
+    virtual ADDR_E_RETURNCODE HwlSetupTileCfg(
+        INT_32 index, INT_32 macroModeIndex,
+        ADDR_TILEINFO* pInfo, AddrTileMode* mode = NULL, AddrTileType* type = NULL) const;
+
+    /// Overwrite macro tile config according to tile index
+    virtual INT_32 HwlComputeMacroModeIndex(
+        INT_32 index, ADDR_SURFACE_FLAGS flags, UINT_32 bpp, UINT_32 numSamples,
+        ADDR_TILEINFO* pTileInfo, AddrTileMode *pTileMode = NULL, AddrTileType *pTileType = NULL
+        ) const
+    {
+        return TileIndexNoMacroIndex;
+    }
+
+    /// Pre-handler of 3x pitch (96 bit) adjustment
+    virtual UINT_32 HwlPreHandleBaseLvl3xPitch(
+        const ADDR_COMPUTE_SURFACE_INFO_INPUT* pIn, UINT_32 expPitch) const;
+    /// Post-handler of 3x pitch adjustment
+    virtual UINT_32 HwlPostHandleBaseLvl3xPitch(
+        const ADDR_COMPUTE_SURFACE_INFO_INPUT* pIn, UINT_32 expPitch) const;
+    /// Check miplevel after surface adjustment
+    ADDR_E_RETURNCODE PostComputeMipLevel(
+        ADDR_COMPUTE_SURFACE_INFO_INPUT* pIn,
+        ADDR_COMPUTE_SURFACE_INFO_OUTPUT* pOut) const;
+
+    /// Quad buffer stereo support, has its implementation in ind. layer
+    virtual BOOL_32 ComputeQbStereoInfo(
+        ADDR_COMPUTE_SURFACE_INFO_OUTPUT* pOut) const;
+
+    /// Pure virutual function to compute stereo bank swizzle for right eye
+    virtual UINT_32 HwlComputeQbStereoRightSwizzle(
+        ADDR_COMPUTE_SURFACE_INFO_OUTPUT* pOut) const = 0;
+
 private:
     // Disallow the copy constructor
-    Lib(const Lib& a);
+    AddrLib(const AddrLib& a);
 
     // Disallow the assignment operator
-    Lib& operator=(const Lib& a);
+    AddrLib& operator=(const AddrLib& a);
 
-    VOID SetChipFamily(UINT_32 uChipFamily, UINT_32 uChipRevision);
+    VOID SetAddrChipFamily(UINT_32 uChipFamily, UINT_32 uChipRevision);
+
+    UINT_32 ComputeCmaskBaseAlign(
+        ADDR_CMASK_FLAGS flags, ADDR_TILEINFO*  pTileInfo) const;
+
+    UINT_64 ComputeCmaskBytes(
+        UINT_32 pitch, UINT_32 height, UINT_32 numSlices) const;
+
+    //
+    // CMASK/HTILE shared methods
+    //
+    VOID    ComputeTileDataWidthAndHeight(
+        UINT_32 bpp, UINT_32 cacheBits, ADDR_TILEINFO* pTileInfo,
+        UINT_32* pMacroWidth, UINT_32* pMacroHeight) const;
+
+    UINT_32 ComputeXmaskCoordYFromPipe(
+        UINT_32 pipe, UINT_32 x) const;
 
     VOID SetMinPitchAlignPixels(UINT_32 minPitchAlignPixels);
 
+    BOOL_32 DegradeBaseLevel(
+        const ADDR_COMPUTE_SURFACE_INFO_INPUT* pIn, AddrTileMode* pTileMode) const;
+
 protected:
-    LibClass    m_class;        ///< Store class type (HWL type)
+    AddrLibClass        m_class;        ///< Store class type (HWL type)
 
-    ChipFamily  m_chipFamily;   ///< Chip family translated from the one in atiid.h
+    AddrChipFamily      m_chipFamily;   ///< Chip family translated from the one in atiid.h
 
-    UINT_32     m_chipRevision; ///< Revision id from xxx_id.h
+    UINT_32             m_chipRevision; ///< Revision id from xxx_id.h
 
-    UINT_32     m_version;      ///< Current version
+    UINT_32             m_version;      ///< Current version
 
     //
     // Global parameters
     //
-    ConfigFlags m_configFlags;          ///< Global configuration flags. Note this is setup by
+    ADDR_CONFIG_FLAGS   m_configFlags;  ///< Global configuration flags. Note this is setup by
                                         ///  AddrLib instead of Client except forceLinearAligned
 
-    UINT_32     m_pipes;                ///< Number of pipes
-    UINT_32     m_banks;                ///< Number of banks
+    UINT_32             m_pipes;        ///< Number of pipes
+    UINT_32             m_banks;        ///< Number of banks
                                         ///  For r800 this is MC_ARB_RAMCFG.NOOFBANK
                                         ///  Keep it here to do default parameter calculation
 
-    UINT_32     m_pipeInterleaveBytes;
+    UINT_32             m_pipeInterleaveBytes;
                                         ///< Specifies the size of contiguous address space
                                         ///  within each tiling pipe when making linear
                                         ///  accesses. (Formerly Group Size)
 
-    UINT_32     m_rowSize;              ///< DRAM row size, in bytes
+    UINT_32             m_rowSize;      ///< DRAM row size, in bytes
 
-    UINT_32     m_minPitchAlignPixels;  ///< Minimum pitch alignment in pixels
-    UINT_32     m_maxSamples;           ///< Max numSamples
+    UINT_32             m_minPitchAlignPixels; ///< Minimum pitch alignment in pixels
+    UINT_32             m_maxSamples;   ///< Max numSamples
 private:
-    ElemLib*    m_pElemLib;             ///< Element Lib pointer
+    AddrElemLib*        m_pElemLib;     ///< Element Lib pointer
 };
 
-Lib* SiHwlInit   (const Client* pClient);
-Lib* CiHwlInit   (const Client* pClient);
-Lib* Gfx9HwlInit (const Client* pClient);
-
-} // Addr
+AddrLib* AddrSIHwlInit  (const AddrClient* pClient);
+AddrLib* AddrCIHwlInit  (const AddrClient* pClient);
 
 #endif
+

src/amd/addrlib/core/addrlib1.h

@@ -1,545 +0,0 @@
-/*
- * Copyright © 2016 Advanced Micro Devices, Inc.
- * All Rights Reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining
- * a copy of this software and associated documentation files (the
- * "Software"), to deal in the Software without restriction, including
- * without limitation the rights to use, copy, modify, merge, publish,
- * distribute, sub license, and/or sell copies of the Software, and to
- * permit persons to whom the Software is furnished to do so, subject to
- * the following conditions:
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NON-INFRINGEMENT. IN NO EVENT SHALL THE COPYRIGHT HOLDERS, AUTHORS
- * AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
- * USE OR OTHER DEALINGS IN THE SOFTWARE.
- *
- * The above copyright notice and this permission notice (including the
- * next paragraph) shall be included in all copies or substantial portions
- * of the Software.
- */
-
-/**
-****************************************************************************************************
-* @file  addrlib1.h
-* @brief Contains the Addr::V1::Lib class definition.
-****************************************************************************************************
-*/
-
-#ifndef __ADDR_LIB1_H__
-#define __ADDR_LIB1_H__
-
-#include "addrlib.h"
-
-namespace Addr
-{
-namespace V1
-{
-
-/**
-****************************************************************************************************
-* @brief Neutral enums that define bank swap size
-****************************************************************************************************
-*/
-enum SampleSplitSize
-{
-    ADDR_SAMPLESPLIT_1KB = 1024,
-    ADDR_SAMPLESPLIT_2KB = 2048,
-    ADDR_SAMPLESPLIT_4KB = 4096,
-    ADDR_SAMPLESPLIT_8KB = 8192,
-};
-
-/**
-****************************************************************************************************
-* @brief Flags for AddrTileMode
-****************************************************************************************************
-*/
-struct TileModeFlags
-{
-    UINT_32 thickness       : 4;
-    UINT_32 isLinear        : 1;
-    UINT_32 isMicro         : 1;
-    UINT_32 isMacro         : 1;
-    UINT_32 isMacro3d       : 1;
-    UINT_32 isPrt           : 1;
-    UINT_32 isPrtNoRotation : 1;
-    UINT_32 isBankSwapped   : 1;
-};
-
-static const UINT_32 Block64K = 0x10000;
-static const UINT_32 PrtTileSize = Block64K;
-
-/**
-****************************************************************************************************
-* @brief This class contains asic independent address lib functionalities
-****************************************************************************************************
-*/
-class Lib : public Addr::Lib
-{
-public:
-    virtual ~Lib();
-
-    static Lib* GetLib(
-        ADDR_HANDLE hLib);
-
-    /// Returns tileIndex support
-    BOOL_32 UseTileIndex(INT_32 index) const
-    {
-        return m_configFlags.useTileIndex && (index != TileIndexInvalid);
-    }
-
-    /// Returns combined swizzle support
-    BOOL_32 UseCombinedSwizzle() const
-    {
-        return m_configFlags.useCombinedSwizzle;
-    }
-
-    //
-    // Interface stubs
-    //
-    ADDR_E_RETURNCODE ComputeSurfaceInfo(
-        const ADDR_COMPUTE_SURFACE_INFO_INPUT* pIn,
-        ADDR_COMPUTE_SURFACE_INFO_OUTPUT* pOut) const;
-
-    ADDR_E_RETURNCODE ComputeSurfaceAddrFromCoord(
-        const ADDR_COMPUTE_SURFACE_ADDRFROMCOORD_INPUT* pIn,
-        ADDR_COMPUTE_SURFACE_ADDRFROMCOORD_OUTPUT* pOut) const;
-
-    ADDR_E_RETURNCODE ComputeSurfaceCoordFromAddr(
-        const ADDR_COMPUTE_SURFACE_COORDFROMADDR_INPUT*  pIn,
-        ADDR_COMPUTE_SURFACE_COORDFROMADDR_OUTPUT* pOut) const;
-
-    ADDR_E_RETURNCODE ComputeSliceTileSwizzle(
-        const ADDR_COMPUTE_SLICESWIZZLE_INPUT*  pIn,
-        ADDR_COMPUTE_SLICESWIZZLE_OUTPUT* pOut) const;
-
-    ADDR_E_RETURNCODE ExtractBankPipeSwizzle(
-        const ADDR_EXTRACT_BANKPIPE_SWIZZLE_INPUT* pIn,
-        ADDR_EXTRACT_BANKPIPE_SWIZZLE_OUTPUT* pOut) const;
-
-    ADDR_E_RETURNCODE CombineBankPipeSwizzle(
-        const ADDR_COMBINE_BANKPIPE_SWIZZLE_INPUT*  pIn,
-        ADDR_COMBINE_BANKPIPE_SWIZZLE_OUTPUT* pOut) const;
-
-    ADDR_E_RETURNCODE ComputeBaseSwizzle(
-        const ADDR_COMPUTE_BASE_SWIZZLE_INPUT*  pIn,
-        ADDR_COMPUTE_BASE_SWIZZLE_OUTPUT* pOut) const;
-
-    ADDR_E_RETURNCODE ComputeFmaskInfo(
-        const ADDR_COMPUTE_FMASK_INFO_INPUT*  pIn,
-        ADDR_COMPUTE_FMASK_INFO_OUTPUT* pOut);
-
-    ADDR_E_RETURNCODE ComputeFmaskAddrFromCoord(
-        const ADDR_COMPUTE_FMASK_ADDRFROMCOORD_INPUT*  pIn,
-        ADDR_COMPUTE_FMASK_ADDRFROMCOORD_OUTPUT* pOut) const;
-
-    ADDR_E_RETURNCODE ComputeFmaskCoordFromAddr(
-        const ADDR_COMPUTE_FMASK_COORDFROMADDR_INPUT*  pIn,
-        ADDR_COMPUTE_FMASK_COORDFROMADDR_OUTPUT* pOut) const;
-
-    ADDR_E_RETURNCODE ConvertTileInfoToHW(
-        const ADDR_CONVERT_TILEINFOTOHW_INPUT* pIn,
-        ADDR_CONVERT_TILEINFOTOHW_OUTPUT* pOut) const;
-
-    ADDR_E_RETURNCODE ConvertTileIndex(
-        const ADDR_CONVERT_TILEINDEX_INPUT* pIn,
-        ADDR_CONVERT_TILEINDEX_OUTPUT* pOut) const;
-
-    ADDR_E_RETURNCODE GetMacroModeIndex(
-        const ADDR_GET_MACROMODEINDEX_INPUT* pIn,
-        ADDR_GET_MACROMODEINDEX_OUTPUT* pOut) const;
-
-    ADDR_E_RETURNCODE ConvertTileIndex1(
-        const ADDR_CONVERT_TILEINDEX1_INPUT* pIn,
-        ADDR_CONVERT_TILEINDEX_OUTPUT* pOut) const;
-
-    ADDR_E_RETURNCODE GetTileIndex(
-        const ADDR_GET_TILEINDEX_INPUT* pIn,
-        ADDR_GET_TILEINDEX_OUTPUT* pOut) const;
-
-    ADDR_E_RETURNCODE ComputeHtileInfo(
-        const ADDR_COMPUTE_HTILE_INFO_INPUT* pIn,
-        ADDR_COMPUTE_HTILE_INFO_OUTPUT* pOut) const;
-
-    ADDR_E_RETURNCODE ComputeCmaskInfo(
-        const ADDR_COMPUTE_CMASK_INFO_INPUT* pIn,
-        ADDR_COMPUTE_CMASK_INFO_OUTPUT* pOut) const;
-
-    ADDR_E_RETURNCODE ComputeDccInfo(
-        const ADDR_COMPUTE_DCCINFO_INPUT* pIn,
-        ADDR_COMPUTE_DCCINFO_OUTPUT* pOut) const;
-
-    ADDR_E_RETURNCODE ComputeHtileAddrFromCoord(
-        const ADDR_COMPUTE_HTILE_ADDRFROMCOORD_INPUT*  pIn,
-        ADDR_COMPUTE_HTILE_ADDRFROMCOORD_OUTPUT* pOut) const;
-
-    ADDR_E_RETURNCODE ComputeCmaskAddrFromCoord(
-        const ADDR_COMPUTE_CMASK_ADDRFROMCOORD_INPUT*  pIn,
-        ADDR_COMPUTE_CMASK_ADDRFROMCOORD_OUTPUT* pOut) const;
-
-    ADDR_E_RETURNCODE ComputeHtileCoordFromAddr(
-        const ADDR_COMPUTE_HTILE_COORDFROMADDR_INPUT*  pIn,
-        ADDR_COMPUTE_HTILE_COORDFROMADDR_OUTPUT* pOut) const;
-
-    ADDR_E_RETURNCODE ComputeCmaskCoordFromAddr(
-        const ADDR_COMPUTE_CMASK_COORDFROMADDR_INPUT*  pIn,
-        ADDR_COMPUTE_CMASK_COORDFROMADDR_OUTPUT* pOut) const;
-
-    ADDR_E_RETURNCODE ComputePrtInfo(
-        const ADDR_PRT_INFO_INPUT*  pIn,
-        ADDR_PRT_INFO_OUTPUT*       pOut) const;
-protected:
-    Lib();  // Constructor is protected
-    Lib(const Client* pClient);
-
-    /// Pure Virtual function for Hwl computing surface info
-    virtual ADDR_E_RETURNCODE HwlComputeSurfaceInfo(
-        const ADDR_COMPUTE_SURFACE_INFO_INPUT* pIn,
-        ADDR_COMPUTE_SURFACE_INFO_OUTPUT* pOut) const = 0;
-
-    /// Pure Virtual function for Hwl computing surface address from coord
-    virtual ADDR_E_RETURNCODE HwlComputeSurfaceAddrFromCoord(
-        const ADDR_COMPUTE_SURFACE_ADDRFROMCOORD_INPUT* pIn,
-        ADDR_COMPUTE_SURFACE_ADDRFROMCOORD_OUTPUT* pOut) const = 0;
-
-    /// Pure Virtual function for Hwl computing surface coord from address
-    virtual ADDR_E_RETURNCODE HwlComputeSurfaceCoordFromAddr(
-        const ADDR_COMPUTE_SURFACE_COORDFROMADDR_INPUT* pIn,
-        ADDR_COMPUTE_SURFACE_COORDFROMADDR_OUTPUT* pOut) const = 0;
-
-    /// Pure Virtual function for Hwl computing surface tile swizzle
-    virtual ADDR_E_RETURNCODE HwlComputeSliceTileSwizzle(
-        const ADDR_COMPUTE_SLICESWIZZLE_INPUT* pIn,
-        ADDR_COMPUTE_SLICESWIZZLE_OUTPUT* pOut) const = 0;
-
-    /// Pure Virtual function for Hwl extracting bank/pipe swizzle from base256b
-    virtual ADDR_E_RETURNCODE HwlExtractBankPipeSwizzle(
-        const ADDR_EXTRACT_BANKPIPE_SWIZZLE_INPUT* pIn,
-        ADDR_EXTRACT_BANKPIPE_SWIZZLE_OUTPUT* pOut) const = 0;
-
-    /// Pure Virtual function for Hwl combining bank/pipe swizzle
-    virtual ADDR_E_RETURNCODE HwlCombineBankPipeSwizzle(
-        UINT_32 bankSwizzle, UINT_32 pipeSwizzle, ADDR_TILEINFO*  pTileInfo,
-        UINT_64 baseAddr, UINT_32* pTileSwizzle) const = 0;
-
-    /// Pure Virtual function for Hwl computing base swizzle
-    virtual ADDR_E_RETURNCODE HwlComputeBaseSwizzle(
-        const ADDR_COMPUTE_BASE_SWIZZLE_INPUT* pIn,
-        ADDR_COMPUTE_BASE_SWIZZLE_OUTPUT* pOut) const = 0;
-
-    /// Pure Virtual function for Hwl computing HTILE base align
-    virtual UINT_32 HwlComputeHtileBaseAlign(
-        BOOL_32 isTcCompatible, BOOL_32 isLinear, ADDR_TILEINFO* pTileInfo) const = 0;
-
-    /// Pure Virtual function for Hwl computing HTILE bpp
-    virtual UINT_32 HwlComputeHtileBpp(
-        BOOL_32 isWidth8, BOOL_32 isHeight8) const = 0;
-
-    /// Pure Virtual function for Hwl computing HTILE bytes
-    virtual UINT_64 HwlComputeHtileBytes(
-        UINT_32 pitch, UINT_32 height, UINT_32 bpp,
-        BOOL_32 isLinear, UINT_32 numSlices, UINT_64* pSliceBytes, UINT_32 baseAlign) const = 0;
-
-    /// Pure Virtual function for Hwl computing FMASK info
-    virtual ADDR_E_RETURNCODE HwlComputeFmaskInfo(
-        const ADDR_COMPUTE_FMASK_INFO_INPUT* pIn,
-        ADDR_COMPUTE_FMASK_INFO_OUTPUT* pOut) = 0;
-
-    /// Pure Virtual function for Hwl FMASK address from coord
-    virtual ADDR_E_RETURNCODE HwlComputeFmaskAddrFromCoord(
-        const ADDR_COMPUTE_FMASK_ADDRFROMCOORD_INPUT* pIn,
-        ADDR_COMPUTE_FMASK_ADDRFROMCOORD_OUTPUT* pOut) const = 0;
-
-    /// Pure Virtual function for Hwl FMASK coord from address
-    virtual ADDR_E_RETURNCODE HwlComputeFmaskCoordFromAddr(
-        const ADDR_COMPUTE_FMASK_COORDFROMADDR_INPUT* pIn,
-        ADDR_COMPUTE_FMASK_COORDFROMADDR_OUTPUT* pOut) const = 0;
-
-    /// Pure Virtual function for Hwl convert tile info from real value to HW value
-    virtual ADDR_E_RETURNCODE HwlConvertTileInfoToHW(
-        const ADDR_CONVERT_TILEINFOTOHW_INPUT* pIn,
-        ADDR_CONVERT_TILEINFOTOHW_OUTPUT* pOut) const = 0;
-
-    /// Pure Virtual function for Hwl compute mipmap info
-    virtual BOOL_32 HwlComputeMipLevel(
-        ADDR_COMPUTE_SURFACE_INFO_INPUT* pIn) const = 0;
-
-    /// Pure Virtual function for Hwl compute max cmask blockMax value
-    virtual BOOL_32 HwlGetMaxCmaskBlockMax() const = 0;
-
-    /// Pure Virtual function for Hwl compute fmask bits
-    virtual UINT_32 HwlComputeFmaskBits(
-        const ADDR_COMPUTE_FMASK_INFO_INPUT* pIn,
-        UINT_32* pNumSamples) const = 0;
-
-    /// Virtual function to get index (not pure then no need to implement this in all hwls
-    virtual ADDR_E_RETURNCODE HwlGetTileIndex(
-        const ADDR_GET_TILEINDEX_INPUT* pIn,
-        ADDR_GET_TILEINDEX_OUTPUT*      pOut) const
-    {
-        return ADDR_NOTSUPPORTED;
-    }
-
-    /// Virtual function for Hwl to compute Dcc info
-    virtual ADDR_E_RETURNCODE HwlComputeDccInfo(
-        const ADDR_COMPUTE_DCCINFO_INPUT* pIn,
-        ADDR_COMPUTE_DCCINFO_OUTPUT* pOut) const
-    {
-        return ADDR_NOTSUPPORTED;
-    }
-
-    /// Virtual function to get cmask address for tc compatible cmask
-    virtual ADDR_E_RETURNCODE HwlComputeCmaskAddrFromCoord(
-        const ADDR_COMPUTE_CMASK_ADDRFROMCOORD_INPUT* pIn,
-        ADDR_COMPUTE_CMASK_ADDRFROMCOORD_OUTPUT* pOut) const
-    {
-        return ADDR_NOTSUPPORTED;
-    }
-
-    /// Virtual function to get htile address for tc compatible htile
-    virtual ADDR_E_RETURNCODE HwlComputeHtileAddrFromCoord(
-        const ADDR_COMPUTE_HTILE_ADDRFROMCOORD_INPUT* pIn,
-        ADDR_COMPUTE_HTILE_ADDRFROMCOORD_OUTPUT* pOut) const
-    {
-        return ADDR_NOTSUPPORTED;
-    }
-
-    // Compute attributes
-
-    // HTILE
-    UINT_32    ComputeHtileInfo(
-        ADDR_HTILE_FLAGS flags,
-        UINT_32 pitchIn, UINT_32 heightIn, UINT_32 numSlices,
-        BOOL_32 isLinear, BOOL_32 isWidth8, BOOL_32 isHeight8,
-        ADDR_TILEINFO*  pTileInfo,
-        UINT_32* pPitchOut, UINT_32* pHeightOut, UINT_64* pHtileBytes,
-        UINT_32* pMacroWidth = NULL, UINT_32* pMacroHeight = NULL,
-        UINT_64* pSliceSize = NULL, UINT_32* pBaseAlign = NULL) const;
-
-    // CMASK
-    ADDR_E_RETURNCODE ComputeCmaskInfo(
-        ADDR_CMASK_FLAGS flags,
-        UINT_32 pitchIn, UINT_32 heightIn, UINT_32 numSlices, BOOL_32 isLinear,
-        ADDR_TILEINFO* pTileInfo, UINT_32* pPitchOut, UINT_32* pHeightOut, UINT_64* pCmaskBytes,
-        UINT_32* pMacroWidth, UINT_32* pMacroHeight, UINT_64* pSliceSize = NULL,
-        UINT_32* pBaseAlign = NULL, UINT_32* pBlockMax = NULL) const;
-
-    virtual VOID HwlComputeTileDataWidthAndHeightLinear(
-        UINT_32* pMacroWidth, UINT_32* pMacroHeight,
-        UINT_32 bpp, ADDR_TILEINFO* pTileInfo) const;
-
-    // CMASK & HTILE addressing
-    virtual UINT_64 HwlComputeXmaskAddrFromCoord(
-        UINT_32 pitch, UINT_32 height, UINT_32 x, UINT_32 y, UINT_32 slice,
-        UINT_32 numSlices, UINT_32 factor, BOOL_32 isLinear, BOOL_32 isWidth8,
-        BOOL_32 isHeight8, ADDR_TILEINFO* pTileInfo,
-        UINT_32* bitPosition) const;
-
-    virtual VOID HwlComputeXmaskCoordFromAddr(
-        UINT_64 addr, UINT_32 bitPosition, UINT_32 pitch, UINT_32 height, UINT_32 numSlices,
-        UINT_32 factor, BOOL_32 isLinear, BOOL_32 isWidth8, BOOL_32 isHeight8,
-        ADDR_TILEINFO* pTileInfo, UINT_32* pX, UINT_32* pY, UINT_32* pSlice) const;
-
-    // Surface mipmap
-    VOID    ComputeMipLevel(
-        ADDR_COMPUTE_SURFACE_INFO_INPUT* pIn) const;
-
-    /// Pure Virtual function for Hwl to get macro tiled alignment info
-    virtual BOOL_32 HwlGetAlignmentInfoMacroTiled(
-        const ADDR_COMPUTE_SURFACE_INFO_INPUT* pIn,
-        UINT_32* pPitchAlign, UINT_32* pHeightAlign, UINT_32* pSizeAlign) const = 0;
-
-
-    virtual VOID HwlOverrideTileMode(ADDR_COMPUTE_SURFACE_INFO_INPUT* pInOut) const
-    {
-        // not supported in hwl layer
-    }
-
-    virtual VOID HwlOptimizeTileMode(ADDR_COMPUTE_SURFACE_INFO_INPUT* pInOut) const
-    {
-        // not supported in hwl layer
-    }
-
-    virtual VOID HwlSelectTileMode(ADDR_COMPUTE_SURFACE_INFO_INPUT* pInOut) const
-    {
-        // not supported in hwl layer
-    }
-
-    AddrTileMode DegradeLargeThickTile(AddrTileMode tileMode, UINT_32 bpp) const;
-
-    VOID PadDimensions(
-        AddrTileMode tileMode, UINT_32 bpp, ADDR_SURFACE_FLAGS flags,
-        UINT_32 numSamples, ADDR_TILEINFO* pTileInfo, UINT_32 padDims, UINT_32 mipLevel,
-        UINT_32* pPitch, UINT_32* pPitchAlign, UINT_32* pHeight, UINT_32 heightAlign,
-        UINT_32* pSlices, UINT_32 sliceAlign) const;
-
-    virtual VOID HwlPadDimensions(
-        AddrTileMode tileMode, UINT_32 bpp, ADDR_SURFACE_FLAGS flags,
-        UINT_32 numSamples, ADDR_TILEINFO* pTileInfo, UINT_32 mipLevel,
-        UINT_32* pPitch, UINT_32* pPitchAlign, UINT_32 height, UINT_32 heightAlign) const
-    {
-    }
-
-    //
-    // Addressing shared for linear/1D tiling
-    //
-    UINT_64 ComputeSurfaceAddrFromCoordLinear(
-        UINT_32 x, UINT_32 y, UINT_32 slice, UINT_32 sample,
-        UINT_32 bpp, UINT_32 pitch, UINT_32 height, UINT_32 numSlices,
-        UINT_32* pBitPosition) const;
-
-    VOID    ComputeSurfaceCoordFromAddrLinear(
-        UINT_64 addr, UINT_32 bitPosition, UINT_32 bpp,
-        UINT_32 pitch, UINT_32 height, UINT_32 numSlices,
-        UINT_32* pX, UINT_32* pY, UINT_32* pSlice, UINT_32* pSample) const;
-
-    VOID    ComputeSurfaceCoordFromAddrMicroTiled(
-        UINT_64 addr, UINT_32 bitPosition,
-        UINT_32 bpp, UINT_32 pitch, UINT_32 height, UINT_32 numSamples,
-        AddrTileMode tileMode, UINT_32 tileBase, UINT_32 compBits,
-        UINT_32* pX, UINT_32* pY, UINT_32* pSlice, UINT_32* pSample,
-        AddrTileType microTileType, BOOL_32 isDepthSampleOrder) const;
-
-    ADDR_E_RETURNCODE ComputeMicroTileEquation(
-        UINT_32 bpp, AddrTileMode tileMode,
-        AddrTileType microTileType, ADDR_EQUATION* pEquation) const;
-
-    UINT_32 ComputePixelIndexWithinMicroTile(
-        UINT_32 x, UINT_32 y, UINT_32 z,
-        UINT_32 bpp, AddrTileMode tileMode, AddrTileType microTileType) const;
-
-    /// Pure Virtual function for Hwl computing coord from offset inside micro tile
-    virtual VOID HwlComputePixelCoordFromOffset(
-        UINT_32 offset, UINT_32 bpp, UINT_32 numSamples,
-        AddrTileMode tileMode, UINT_32 tileBase, UINT_32 compBits,
-        UINT_32* pX, UINT_32* pY, UINT_32* pSlice, UINT_32* pSample,
-        AddrTileType microTileType, BOOL_32 isDepthSampleOrder) const = 0;
-
-    //
-    // Addressing shared by all
-    //
-    virtual UINT_32 HwlGetPipes(
-        const ADDR_TILEINFO* pTileInfo) const;
-
-    UINT_32 ComputePipeFromAddr(
-        UINT_64 addr, UINT_32 numPipes) const;
-
-    virtual ADDR_E_RETURNCODE ComputePipeEquation(
-        UINT_32 log2BytesPP, UINT_32 threshX, UINT_32 threshY, ADDR_TILEINFO* pTileInfo, ADDR_EQUATION* pEquation) const
-    {
-        return ADDR_NOTSUPPORTED;
-    }
-
-    /// Pure Virtual function for Hwl computing pipe from coord
-    virtual UINT_32 ComputePipeFromCoord(
-        UINT_32 x, UINT_32 y, UINT_32 slice, AddrTileMode tileMode,
-        UINT_32 pipeSwizzle, BOOL_32 flags, ADDR_TILEINFO* pTileInfo) const = 0;
-
-    /// Pure Virtual function for Hwl computing coord Y for 8 pipe cmask/htile
-    virtual UINT_32 HwlComputeXmaskCoordYFrom8Pipe(
-        UINT_32 pipe, UINT_32 x) const = 0;
-
-    //
-    // Misc helper
-    //
-    static const TileModeFlags ModeFlags[ADDR_TM_COUNT];
-
-    static UINT_32 Thickness(
-        AddrTileMode tileMode);
-
-    // Checking tile mode
-    static BOOL_32 IsMacroTiled(AddrTileMode tileMode);
-    static BOOL_32 IsMacro3dTiled(AddrTileMode tileMode);
-    static BOOL_32 IsLinear(AddrTileMode tileMode);
-    static BOOL_32 IsMicroTiled(AddrTileMode tileMode);
-    static BOOL_32 IsPrtTileMode(AddrTileMode tileMode);
-    static BOOL_32 IsPrtNoRotationTileMode(AddrTileMode tileMode);
-
-    /// Return TRUE if tile info is needed
-    BOOL_32 UseTileInfo() const
-    {
-        return !m_configFlags.ignoreTileInfo;
-    }
-
-    /// Adjusts pitch alignment for flipping surface
-    VOID    AdjustPitchAlignment(
-        ADDR_SURFACE_FLAGS flags, UINT_32* pPitchAlign) const;
-
-    /// Overwrite tile config according to tile index
-    virtual ADDR_E_RETURNCODE HwlSetupTileCfg(
-        UINT_32 bpp, INT_32 index, INT_32 macroModeIndex,
-        ADDR_TILEINFO* pInfo, AddrTileMode* mode = NULL, AddrTileType* type = NULL) const;
-
-    /// Overwrite macro tile config according to tile index
-    virtual INT_32 HwlComputeMacroModeIndex(
-        INT_32 index, ADDR_SURFACE_FLAGS flags, UINT_32 bpp, UINT_32 numSamples,
-        ADDR_TILEINFO* pTileInfo, AddrTileMode *pTileMode = NULL, AddrTileType *pTileType = NULL
-        ) const
-    {
-        return TileIndexNoMacroIndex;
-    }
-
-    /// Pre-handler of 3x pitch (96 bit) adjustment
-    virtual UINT_32 HwlPreHandleBaseLvl3xPitch(
-        const ADDR_COMPUTE_SURFACE_INFO_INPUT* pIn, UINT_32 expPitch) const;
-    /// Post-handler of 3x pitch adjustment
-    virtual UINT_32 HwlPostHandleBaseLvl3xPitch(
-        const ADDR_COMPUTE_SURFACE_INFO_INPUT* pIn, UINT_32 expPitch) const;
-    /// Check miplevel after surface adjustment
-    ADDR_E_RETURNCODE PostComputeMipLevel(
-        ADDR_COMPUTE_SURFACE_INFO_INPUT* pIn,
-        ADDR_COMPUTE_SURFACE_INFO_OUTPUT* pOut) const;
-
-    /// Quad buffer stereo support, has its implementation in ind. layer
-    VOID ComputeQbStereoInfo(
-        ADDR_COMPUTE_SURFACE_INFO_OUTPUT* pOut) const;
-
-    /// Pure virutual function to compute stereo bank swizzle for right eye
-    virtual UINT_32 HwlComputeQbStereoRightSwizzle(
-        ADDR_COMPUTE_SURFACE_INFO_OUTPUT* pOut) const = 0;
-
-    VOID OptimizeTileMode(ADDR_COMPUTE_SURFACE_INFO_INPUT* pInOut) const;
-
-    /// Overwrite tile setting to PRT
-    virtual VOID HwlSetPrtTileMode(ADDR_COMPUTE_SURFACE_INFO_INPUT* pInOut) const
-    {
-    }
-
-    static BOOL_32 DegradeTo1D(
-        UINT_32 width, UINT_32 height,
-        UINT_32 macroTilePitchAlign, UINT_32 macroTileHeightAlign);
-
-private:
-    // Disallow the copy constructor
-    Lib(const Lib& a);
-
-    // Disallow the assignment operator
-    Lib& operator=(const Lib& a);
-
-    UINT_32 ComputeCmaskBaseAlign(
-        ADDR_CMASK_FLAGS flags, ADDR_TILEINFO*  pTileInfo) const;
-
-    UINT_64 ComputeCmaskBytes(
-        UINT_32 pitch, UINT_32 height, UINT_32 numSlices) const;
-
-    //
-    // CMASK/HTILE shared methods
-    //
-    VOID    ComputeTileDataWidthAndHeight(
-        UINT_32 bpp, UINT_32 cacheBits, ADDR_TILEINFO* pTileInfo,
-        UINT_32* pMacroWidth, UINT_32* pMacroHeight) const;
-
-    UINT_32 ComputeXmaskCoordYFromPipe(
-        UINT_32 pipe, UINT_32 x) const;
-};
-
-} // V1
-} // Addr
-
-#endif
-

src/amd/addrlib/core/addrlib2.h

@@ -1,788 +0,0 @@
-/*
- * Copyright © 2017 Advanced Micro Devices, Inc.
- * All Rights Reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining
- * a copy of this software and associated documentation files (the
- * "Software"), to deal in the Software without restriction, including
- * without limitation the rights to use, copy, modify, merge, publish,
- * distribute, sub license, and/or sell copies of the Software, and to
- * permit persons to whom the Software is furnished to do so, subject to
- * the following conditions:
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NON-INFRINGEMENT. IN NO EVENT SHALL THE COPYRIGHT HOLDERS, AUTHORS
- * AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
- * USE OR OTHER DEALINGS IN THE SOFTWARE.
- *
- * The above copyright notice and this permission notice (including the
- * next paragraph) shall be included in all copies or substantial portions
- * of the Software.
- */
-
-/**
-************************************************************************************************************************
-* @file  addrlib2.h
-* @brief Contains the Addr::V2::Lib class definition.
-************************************************************************************************************************
-*/
-
-#ifndef __ADDR2_LIB2_H__
-#define __ADDR2_LIB2_H__
-
-#include "addrlib.h"
-
-namespace Addr
-{
-namespace V2
-{
-
-/**
-************************************************************************************************************************
-* @brief Flags for SwizzleModeTable
-************************************************************************************************************************
-*/
-struct SwizzleModeFlags
-{
-    // Swizzle mode
-    UINT_32 isLinear        : 1;    // Linear
-
-    // Block size
-    UINT_32 is256b          : 1;    // Block size is 256B
-    UINT_32 is4kb           : 1;    // Block size is 4KB
-    UINT_32 is64kb          : 1;    // Block size is 64KB
-    UINT_32 isVar           : 1;    // Block size is variable
-
-    UINT_32 isZ             : 1;    // Z order swizzle mode
-    UINT_32 isStd           : 1;    // Standard swizzle mode
-    UINT_32 isDisp          : 1;    // Display swizzle mode
-    UINT_32 isRot           : 1;    // Rotate swizzle mode
-
-    // XOR mode
-    UINT_32 isXor           : 1;    // XOR after swizzle if set
-
-    UINT_32 isT             : 1;    // T mode
-
-    UINT_32 isRtOpt         : 1;    // mode opt for render target
-};
-
-struct Dim2d
-{
-    UINT_32 w;
-    UINT_32 h;
-};
-
-struct Dim3d
-{
-    UINT_32 w;
-    UINT_32 h;
-    UINT_32 d;
-};
-
-/**
-************************************************************************************************************************
-* @brief This class contains asic independent address lib functionalities
-************************************************************************************************************************
-*/
-class Lib : public Addr::Lib
-{
-public:
-    virtual ~Lib();
-
-    static Lib* GetLib(
-        ADDR_HANDLE hLib);
-
-    //
-    // Interface stubs
-    //
-
-    // For data surface
-    ADDR_E_RETURNCODE ComputeSurfaceInfo(
-        const ADDR2_COMPUTE_SURFACE_INFO_INPUT* pIn,
-        ADDR2_COMPUTE_SURFACE_INFO_OUTPUT* pOut) const;
-
-    ADDR_E_RETURNCODE ComputeSurfaceAddrFromCoord(
-        const ADDR2_COMPUTE_SURFACE_ADDRFROMCOORD_INPUT* pIn,
-        ADDR2_COMPUTE_SURFACE_ADDRFROMCOORD_OUTPUT* pOut) const;
-
-    ADDR_E_RETURNCODE ComputeSurfaceCoordFromAddr(
-        const ADDR2_COMPUTE_SURFACE_COORDFROMADDR_INPUT*  pIn,
-        ADDR2_COMPUTE_SURFACE_COORDFROMADDR_OUTPUT* pOut) const;
-
-    // For HTile
-    ADDR_E_RETURNCODE ComputeHtileInfo(
-        const ADDR2_COMPUTE_HTILE_INFO_INPUT* pIn,
-        ADDR2_COMPUTE_HTILE_INFO_OUTPUT* pOut) const;
-
-    ADDR_E_RETURNCODE ComputeHtileAddrFromCoord(
-        const ADDR2_COMPUTE_HTILE_ADDRFROMCOORD_INPUT*  pIn,
-        ADDR2_COMPUTE_HTILE_ADDRFROMCOORD_OUTPUT* pOut) const;
-
-    ADDR_E_RETURNCODE ComputeHtileCoordFromAddr(
-        const ADDR2_COMPUTE_HTILE_COORDFROMADDR_INPUT*  pIn,
-        ADDR2_COMPUTE_HTILE_COORDFROMADDR_OUTPUT* pOut) const;
-
-    // For CMask
-    ADDR_E_RETURNCODE ComputeCmaskInfo(
-        const ADDR2_COMPUTE_CMASK_INFO_INPUT* pIn,
-        ADDR2_COMPUTE_CMASK_INFO_OUTPUT* pOut) const;
-
-    ADDR_E_RETURNCODE ComputeCmaskAddrFromCoord(
-        const ADDR2_COMPUTE_CMASK_ADDRFROMCOORD_INPUT*  pIn,
-        ADDR2_COMPUTE_CMASK_ADDRFROMCOORD_OUTPUT* pOut) const;
-
-    ADDR_E_RETURNCODE ComputeCmaskCoordFromAddr(
-        const ADDR2_COMPUTE_CMASK_COORDFROMADDR_INPUT*  pIn,
-        ADDR2_COMPUTE_CMASK_COORDFROMADDR_OUTPUT* pOut) const;
-
-    // For FMask
-    ADDR_E_RETURNCODE ComputeFmaskInfo(
-        const ADDR2_COMPUTE_FMASK_INFO_INPUT*  pIn,
-        ADDR2_COMPUTE_FMASK_INFO_OUTPUT* pOut);
-
-    ADDR_E_RETURNCODE ComputeFmaskAddrFromCoord(
-        const ADDR2_COMPUTE_FMASK_ADDRFROMCOORD_INPUT*  pIn,
-        ADDR2_COMPUTE_FMASK_ADDRFROMCOORD_OUTPUT* pOut) const;
-
-    ADDR_E_RETURNCODE ComputeFmaskCoordFromAddr(
-        const ADDR2_COMPUTE_FMASK_COORDFROMADDR_INPUT*  pIn,
-        ADDR2_COMPUTE_FMASK_COORDFROMADDR_OUTPUT* pOut) const;
-
-    // For DCC key
-    ADDR_E_RETURNCODE ComputeDccInfo(
-        const ADDR2_COMPUTE_DCCINFO_INPUT* pIn,
-        ADDR2_COMPUTE_DCCINFO_OUTPUT* pOut) const;
-
-    ADDR_E_RETURNCODE ComputeDccAddrFromCoord(
-        const ADDR2_COMPUTE_DCC_ADDRFROMCOORD_INPUT*  pIn,
-        ADDR2_COMPUTE_DCC_ADDRFROMCOORD_OUTPUT* pOut) const;
-
-    // Misc
-    ADDR_E_RETURNCODE ComputePipeBankXor(
-        const ADDR2_COMPUTE_PIPEBANKXOR_INPUT* pIn,
-        ADDR2_COMPUTE_PIPEBANKXOR_OUTPUT*      pOut);
-
-    ADDR_E_RETURNCODE ComputeSlicePipeBankXor(
-        const ADDR2_COMPUTE_SLICE_PIPEBANKXOR_INPUT* pIn,
-        ADDR2_COMPUTE_SLICE_PIPEBANKXOR_OUTPUT*      pOut);
-
-    ADDR_E_RETURNCODE ComputeSubResourceOffsetForSwizzlePattern(
-        const ADDR2_COMPUTE_SUBRESOURCE_OFFSET_FORSWIZZLEPATTERN_INPUT* pIn,
-        ADDR2_COMPUTE_SUBRESOURCE_OFFSET_FORSWIZZLEPATTERN_OUTPUT*      pOut);
-
-    ADDR_E_RETURNCODE Addr2GetPreferredSurfaceSetting(
-        const ADDR2_GET_PREFERRED_SURF_SETTING_INPUT* pIn,
-        ADDR2_GET_PREFERRED_SURF_SETTING_OUTPUT*      pOut) const;
-
-protected:
-    Lib();  // Constructor is protected
-    Lib(const Client* pClient);
-
-    static const UINT_32 MaxNumOfBpp = 5;
-
-    static const Dim2d Block256_2d[MaxNumOfBpp];
-    static const Dim3d Block1K_3d[MaxNumOfBpp];
-
-    static const UINT_32 PrtAlignment = 64 * 1024;
-    static const UINT_32 MaxMacroBits = 20;
-
-    // Checking block size
-    BOOL_32 IsBlock256b(AddrSwizzleMode swizzleMode) const
-    {
-        return m_swizzleModeTable[swizzleMode].is256b;
-    }
-
-    BOOL_32 IsBlock4kb(AddrSwizzleMode swizzleMode) const
-    {
-        return m_swizzleModeTable[swizzleMode].is4kb;
-    }
-
-    BOOL_32 IsBlock64kb(AddrSwizzleMode swizzleMode) const
-    {
-        return m_swizzleModeTable[swizzleMode].is64kb;
-    }
-
-    BOOL_32 IsBlockVariable(AddrSwizzleMode swizzleMode) const
-    {
-        return m_swizzleModeTable[swizzleMode].isVar;
-    }
-
-    // Checking swizzle mode
-    BOOL_32 IsLinear(AddrSwizzleMode swizzleMode) const
-    {
-        return m_swizzleModeTable[swizzleMode].isLinear;
-    }
-
-    BOOL_32 IsRtOptSwizzle(AddrSwizzleMode swizzleMode) const
-    {
-        return m_swizzleModeTable[swizzleMode].isRtOpt;
-    }
-
-    BOOL_32 IsZOrderSwizzle(AddrSwizzleMode swizzleMode) const
-    {
-        return m_swizzleModeTable[swizzleMode].isZ;
-    }
-
-    BOOL_32 IsStandardSwizzle(AddrResourceType resourceType, AddrSwizzleMode swizzleMode) const
-    {
-        return HwlIsStandardSwizzle(resourceType, swizzleMode);
-    }
-
-    BOOL_32 IsDisplaySwizzle(AddrResourceType resourceType, AddrSwizzleMode swizzleMode) const
-    {
-        return HwlIsDisplaySwizzle(resourceType, swizzleMode);
-    }
-
-    BOOL_32 IsRotateSwizzle(AddrSwizzleMode swizzleMode) const
-    {
-        return m_swizzleModeTable[swizzleMode].isRot;
-    }
-
-    BOOL_32 IsXor(AddrSwizzleMode swizzleMode) const
-    {
-        return m_swizzleModeTable[swizzleMode].isXor;
-    }
-
-    BOOL_32 IsPrt(AddrSwizzleMode swizzleMode) const
-    {
-        return m_swizzleModeTable[swizzleMode].isT;
-    }
-
-    BOOL_32 IsNonPrtXor(AddrSwizzleMode swizzleMode) const
-    {
-        return (IsXor(swizzleMode) && (IsPrt(swizzleMode) == FALSE));
-    }
-
-    // Checking resource type
-    static BOOL_32 IsTex1d(AddrResourceType resourceType)
-    {
-        return (resourceType == ADDR_RSRC_TEX_1D);
-    }
-
-    static BOOL_32 IsTex2d(AddrResourceType resourceType)
-    {
-        return (resourceType == ADDR_RSRC_TEX_2D);
-    }
-
-    static BOOL_32 IsTex3d(AddrResourceType resourceType)
-    {
-        return (resourceType == ADDR_RSRC_TEX_3D);
-    }
-
-    BOOL_32 IsThick(AddrResourceType resourceType, AddrSwizzleMode swizzleMode) const
-    {
-        return HwlIsThick(resourceType, swizzleMode);
-    }
-
-    BOOL_32 IsThin(AddrResourceType resourceType, AddrSwizzleMode swizzleMode) const
-    {
-        return HwlIsThin(resourceType, swizzleMode);
-    }
-
-    UINT_32 GetBlockSizeLog2(AddrSwizzleMode swizzleMode) const
-    {
-        UINT_32 blockSizeLog2 = 0;
-
-        if (IsBlock256b(swizzleMode) || IsLinear(swizzleMode))
-        {
-            blockSizeLog2 = 8;
-        }
-        else if (IsBlock4kb(swizzleMode))
-        {
-            blockSizeLog2 = 12;
-        }
-        else if (IsBlock64kb(swizzleMode))
-        {
-            blockSizeLog2 = 16;
-        }
-        else if (IsBlockVariable(swizzleMode))
-        {
-            blockSizeLog2 = m_blockVarSizeLog2;
-        }
-        else
-        {
-            ADDR_ASSERT_ALWAYS();
-        }
-
-        return blockSizeLog2;
-    }
-
-    UINT_32 GetBlockSize(AddrSwizzleMode swizzleMode) const
-    {
-        return (1 << GetBlockSizeLog2(swizzleMode));
-    }
-
-    static UINT_32 GetFmaskBpp(UINT_32 sample, UINT_32 frag)
-    {
-        sample = (sample == 0) ? 1 : sample;
-        frag   = (frag   == 0) ? sample : frag;
-
-        UINT_32 fmaskBpp = QLog2(frag);
-
-        if (sample > frag)
-        {
-            fmaskBpp++;
-        }
-
-        if (fmaskBpp == 3)
-        {
-            fmaskBpp = 4;
-        }
-
-        fmaskBpp = Max(8u, fmaskBpp * sample);
-
-        return fmaskBpp;
-    }
-
-    virtual BOOL_32 HwlIsStandardSwizzle(
-        AddrResourceType resourceType,
-        AddrSwizzleMode  swizzleMode) const
-    {
-        ADDR_NOT_IMPLEMENTED();
-        return FALSE;
-    }
-
-    virtual BOOL_32 HwlIsDisplaySwizzle(
-        AddrResourceType resourceType,
-        AddrSwizzleMode  swizzleMode) const
-    {
-        ADDR_NOT_IMPLEMENTED();
-        return FALSE;
-    }
-
-    virtual BOOL_32 HwlIsThin(
-        AddrResourceType resourceType,
-        AddrSwizzleMode  swizzleMode) const
-    {
-        ADDR_NOT_IMPLEMENTED();
-        return FALSE;
-    }
-
-    virtual BOOL_32 HwlIsThick(
-        AddrResourceType resourceType,
-        AddrSwizzleMode  swizzleMode) const
-    {
-        ADDR_NOT_IMPLEMENTED();
-        return FALSE;
-    }
-
-    virtual ADDR_E_RETURNCODE HwlComputeHtileInfo(
-        const ADDR2_COMPUTE_HTILE_INFO_INPUT*    pIn,
-        ADDR2_COMPUTE_HTILE_INFO_OUTPUT*         pOut) const
-    {
-        ADDR_NOT_IMPLEMENTED();
-        return ADDR_NOTSUPPORTED;
-    }
-
-    virtual ADDR_E_RETURNCODE HwlComputeCmaskInfo(
-        const ADDR2_COMPUTE_CMASK_INFO_INPUT*    pIn,
-        ADDR2_COMPUTE_CMASK_INFO_OUTPUT*         pOut) const
-    {
-        ADDR_NOT_IMPLEMENTED();
-        return ADDR_NOTSUPPORTED;
-    }
-
-    virtual ADDR_E_RETURNCODE HwlComputeDccInfo(
-        const ADDR2_COMPUTE_DCCINFO_INPUT*    pIn,
-        ADDR2_COMPUTE_DCCINFO_OUTPUT*         pOut) const
-    {
-        ADDR_NOT_IMPLEMENTED();
-        return ADDR_NOTSUPPORTED;
-    }
-
-    virtual ADDR_E_RETURNCODE HwlComputeDccAddrFromCoord(
-        const ADDR2_COMPUTE_DCC_ADDRFROMCOORD_INPUT*  pIn,
-        ADDR2_COMPUTE_DCC_ADDRFROMCOORD_OUTPUT* pOut) const
-    {
-        ADDR_NOT_IMPLEMENTED();
-        return ADDR_NOTSUPPORTED;
-    }
-
-    virtual ADDR_E_RETURNCODE HwlComputeCmaskAddrFromCoord(
-        const ADDR2_COMPUTE_CMASK_ADDRFROMCOORD_INPUT*  pIn,
-        ADDR2_COMPUTE_CMASK_ADDRFROMCOORD_OUTPUT* pOut) const
-    {
-        ADDR_NOT_IMPLEMENTED();
-        return ADDR_NOTSUPPORTED;
-    }
-
-    virtual ADDR_E_RETURNCODE HwlComputeHtileAddrFromCoord(
-        const ADDR2_COMPUTE_HTILE_ADDRFROMCOORD_INPUT*  pIn,
-        ADDR2_COMPUTE_HTILE_ADDRFROMCOORD_OUTPUT* pOut) const
-    {
-        ADDR_NOT_IMPLEMENTED();
-        return ADDR_NOTSUPPORTED;
-    }
-
-    virtual ADDR_E_RETURNCODE HwlComputeHtileCoordFromAddr(
-        const ADDR2_COMPUTE_HTILE_COORDFROMADDR_INPUT*  pIn,
-        ADDR2_COMPUTE_HTILE_COORDFROMADDR_OUTPUT* pOut) const
-    {
-        ADDR_NOT_IMPLEMENTED();
-        return ADDR_NOTSUPPORTED;
-    }
-
-    virtual ADDR_E_RETURNCODE HwlComputeBlock256Equation(
-        AddrResourceType rsrcType,
-        AddrSwizzleMode swMode,
-        UINT_32 elementBytesLog2,
-        ADDR_EQUATION* pEquation) const
-    {
-        ADDR_NOT_IMPLEMENTED();
-        return ADDR_NOTSUPPORTED;
-    }
-
-    virtual ADDR_E_RETURNCODE HwlComputeThinEquation(
-        AddrResourceType rsrcType,
-        AddrSwizzleMode swMode,
-        UINT_32 elementBytesLog2,
-        ADDR_EQUATION* pEquation) const
-    {
-        ADDR_NOT_IMPLEMENTED();
-        return ADDR_NOTSUPPORTED;
-    }
-
-    virtual ADDR_E_RETURNCODE HwlComputeThickEquation(
-        AddrResourceType rsrcType,
-        AddrSwizzleMode swMode,
-        UINT_32 elementBytesLog2,
-        ADDR_EQUATION* pEquation) const
-    {
-        ADDR_NOT_IMPLEMENTED();
-        return ADDR_NOTSUPPORTED;
-    }
-
-    virtual UINT_32 HwlGetEquationIndex(
-        const ADDR2_COMPUTE_SURFACE_INFO_INPUT* pIn,
-        ADDR2_COMPUTE_SURFACE_INFO_OUTPUT*      pOut) const
-    {
-        ADDR_NOT_IMPLEMENTED();
-        return ADDR_INVALID_EQUATION_INDEX;
-    }
-
-    UINT_32 GetEquationIndex(
-        const ADDR2_COMPUTE_SURFACE_INFO_INPUT* pIn,
-        ADDR2_COMPUTE_SURFACE_INFO_OUTPUT*      pOut) const
-    {
-        return HwlGetEquationIndex(pIn, pOut);
-    }
-
-    virtual UINT_32 HwlComputeSurfaceBaseAlign(AddrSwizzleMode swizzleMode) const
-    {
-        ADDR_NOT_IMPLEMENTED();
-        return 0;
-    }
-
-    virtual ADDR_E_RETURNCODE HwlComputePipeBankXor(
-        const ADDR2_COMPUTE_PIPEBANKXOR_INPUT* pIn,
-        ADDR2_COMPUTE_PIPEBANKXOR_OUTPUT*      pOut) const
-    {
-        ADDR_NOT_IMPLEMENTED();
-        return ADDR_NOTSUPPORTED;
-    }
-
-    virtual ADDR_E_RETURNCODE HwlComputeSlicePipeBankXor(
-        const ADDR2_COMPUTE_SLICE_PIPEBANKXOR_INPUT* pIn,
-        ADDR2_COMPUTE_SLICE_PIPEBANKXOR_OUTPUT*      pOut) const
-    {
-        ADDR_NOT_IMPLEMENTED();
-        return ADDR_NOTSUPPORTED;
-    }
-
-
-    virtual ADDR_E_RETURNCODE HwlComputeSubResourceOffsetForSwizzlePattern(
-        const ADDR2_COMPUTE_SUBRESOURCE_OFFSET_FORSWIZZLEPATTERN_INPUT* pIn,
-        ADDR2_COMPUTE_SUBRESOURCE_OFFSET_FORSWIZZLEPATTERN_OUTPUT*      pOut) const
-    {
-        ADDR_NOT_IMPLEMENTED();
-        return ADDR_NOTSUPPORTED;
-    }
-
-    virtual ADDR_E_RETURNCODE HwlGetPreferredSurfaceSetting(
-        const ADDR2_GET_PREFERRED_SURF_SETTING_INPUT* pIn,
-        ADDR2_GET_PREFERRED_SURF_SETTING_OUTPUT*      pOut) const
-    {
-        ADDR_NOT_IMPLEMENTED();
-        return ADDR_NOTSUPPORTED;
-    }
-
-    virtual ADDR_E_RETURNCODE HwlComputeSurfaceInfoSanityCheck(
-        const ADDR2_COMPUTE_SURFACE_INFO_INPUT* pIn) const
-    {
-        ADDR_NOT_IMPLEMENTED();
-        return ADDR_NOTSUPPORTED;
-    }
-
-    virtual ADDR_E_RETURNCODE HwlComputeSurfaceInfoTiled(
-         const ADDR2_COMPUTE_SURFACE_INFO_INPUT* pIn,
-         ADDR2_COMPUTE_SURFACE_INFO_OUTPUT*      pOut) const
-    {
-        ADDR_NOT_IMPLEMENTED();
-        return ADDR_NOTIMPLEMENTED;
-    }
-
-    virtual ADDR_E_RETURNCODE HwlComputeSurfaceAddrFromCoordTiled(
-        const ADDR2_COMPUTE_SURFACE_ADDRFROMCOORD_INPUT* pIn,
-        ADDR2_COMPUTE_SURFACE_ADDRFROMCOORD_OUTPUT*      pOut) const
-    {
-        ADDR_NOT_IMPLEMENTED();
-        return ADDR_NOTIMPLEMENTED;
-    }
-
-    ADDR_E_RETURNCODE ComputeBlock256Equation(
-        AddrResourceType rsrcType,
-        AddrSwizzleMode swMode,
-        UINT_32 elementBytesLog2,
-        ADDR_EQUATION* pEquation) const;
-
-    ADDR_E_RETURNCODE ComputeThinEquation(
-        AddrResourceType rsrcType,
-        AddrSwizzleMode swMode,
-        UINT_32 elementBytesLog2,
-        ADDR_EQUATION* pEquation) const;
-
-    ADDR_E_RETURNCODE ComputeThickEquation(
-        AddrResourceType rsrcType,
-        AddrSwizzleMode swMode,
-        UINT_32 elementBytesLog2,
-        ADDR_EQUATION* pEquation) const;
-
-    ADDR_E_RETURNCODE ComputeSurfaceInfoSanityCheck(
-        const ADDR2_COMPUTE_SURFACE_INFO_INPUT* pIn) const;
-
-    ADDR_E_RETURNCODE ComputeSurfaceInfoLinear(
-        const ADDR2_COMPUTE_SURFACE_INFO_INPUT* pIn,
-        ADDR2_COMPUTE_SURFACE_INFO_OUTPUT*      pOut) const;
-
-    ADDR_E_RETURNCODE ComputeSurfaceLinearPadding(
-        const ADDR2_COMPUTE_SURFACE_INFO_INPUT* pIn,
-        UINT_32* pMipmap0PaddedWidth,
-        UINT_32* pSlice0PaddedHeight,
-        ADDR2_MIP_INFO* pMipInfo = NULL) const;
-
-    ADDR_E_RETURNCODE ComputeSurfaceInfoTiled(
-        const ADDR2_COMPUTE_SURFACE_INFO_INPUT* pIn,
-        ADDR2_COMPUTE_SURFACE_INFO_OUTPUT*      pOut) const;
-
-    ADDR_E_RETURNCODE ComputeSurfaceAddrFromCoordLinear(
-        const ADDR2_COMPUTE_SURFACE_ADDRFROMCOORD_INPUT* pIn,
-        ADDR2_COMPUTE_SURFACE_ADDRFROMCOORD_OUTPUT*      pOut) const;
-
-    ADDR_E_RETURNCODE ComputeSurfaceAddrFromCoordTiled(
-        const ADDR2_COMPUTE_SURFACE_ADDRFROMCOORD_INPUT* pIn,
-        ADDR2_COMPUTE_SURFACE_ADDRFROMCOORD_OUTPUT*      pOut) const;
-
-    ADDR_E_RETURNCODE ComputeSurfaceCoordFromAddrLinear(
-        const ADDR2_COMPUTE_SURFACE_COORDFROMADDR_INPUT* pIn,
-        ADDR2_COMPUTE_SURFACE_COORDFROMADDR_OUTPUT*      pOut) const;
-
-    ADDR_E_RETURNCODE ComputeSurfaceCoordFromAddrTiled(
-        const ADDR2_COMPUTE_SURFACE_COORDFROMADDR_INPUT* pIn,
-        ADDR2_COMPUTE_SURFACE_COORDFROMADDR_OUTPUT*      pOut) const;
-
-    UINT_32 ComputeSurface2DMicroBlockOffset(
-        const _ADDR2_COMPUTE_SURFACE_ADDRFROMCOORD_INPUT* pIn) const;
-
-    UINT_32 ComputeSurface3DMicroBlockOffset(
-        const _ADDR2_COMPUTE_SURFACE_ADDRFROMCOORD_INPUT* pIn) const;
-
-    // Misc
-    ADDR_E_RETURNCODE ComputeBlockDimensionForSurf(
-        UINT_32*         pWidth,
-        UINT_32*         pHeight,
-        UINT_32*         pDepth,
-        UINT_32          bpp,
-        UINT_32          numSamples,
-        AddrResourceType resourceType,
-        AddrSwizzleMode  swizzleMode) const;
-
-    ADDR_E_RETURNCODE ComputeBlockDimension(
-        UINT_32*          pWidth,
-        UINT_32*          pHeight,
-        UINT_32*          pDepth,
-        UINT_32           bpp,
-        AddrResourceType  resourceType,
-        AddrSwizzleMode   swizzleMode) const;
-
-    static UINT_64 ComputePadSize(
-        const Dim3d*      pBlkDim,
-        UINT_32           width,
-        UINT_32           height,
-        UINT_32           numSlices,
-        Dim3d*            pPadDim)
-    {
-        pPadDim->w = PowTwoAlign(width ,pBlkDim->w);
-        pPadDim->h = PowTwoAlign(height ,pBlkDim->h);
-        pPadDim->d = PowTwoAlign(numSlices, pBlkDim->d);
-        return static_cast<UINT_64>(pPadDim->w) * pPadDim->h * pPadDim->d;
-    }
-
-    static ADDR_E_RETURNCODE ExtractPipeBankXor(
-        UINT_32  pipeBankXor,
-        UINT_32  bankBits,
-        UINT_32  pipeBits,
-        UINT_32* pBankX,
-        UINT_32* pPipeX);
-
-    static BOOL_32 Valid3DMipSliceIdConstraint(
-        UINT_32 numSlices,
-        UINT_32 mipId,
-        UINT_32 slice)
-    {
-        return (Max((numSlices >> mipId), 1u) > slice);
-    }
-
-    Dim3d GetMipTailDim(
-        AddrResourceType  resourceType,
-        AddrSwizzleMode   swizzleMode,
-        UINT_32           blockWidth,
-        UINT_32           blockHeight,
-        UINT_32           blockDepth) const;
-
-    BOOL_32 IsInMipTail(
-        AddrResourceType  resourceType,
-        AddrSwizzleMode   swizzleMode,
-        Dim3d             mipTailDim,
-        UINT_32           width,
-        UINT_32           height,
-        UINT_32           depth) const
-    {
-        BOOL_32 inTail = ((width <= mipTailDim.w) &&
-                          (height <= mipTailDim.h) &&
-                          (IsThin(resourceType, swizzleMode) || (depth <= mipTailDim.d)));
-
-        return inTail;
-    }
-
-    static BOOL_32 IsLocalHeap(AddrResrouceLocation resourceType)
-    {
-        return ((resourceType == ADDR_RSRC_LOC_LOCAL) ||
-                (resourceType == ADDR_RSRC_LOC_INVIS));
-    }
-
-    static BOOL_32 IsInvisibleHeap(AddrResrouceLocation resourceType)
-    {
-        return (resourceType == ADDR_RSRC_LOC_INVIS);
-    }
-
-    static BOOL_32 IsNonlocalHeap(AddrResrouceLocation resourceType)
-    {
-        return ((resourceType == ADDR_RSRC_LOC_USWC) ||
-                (resourceType == ADDR_RSRC_LOC_CACHED));
-    }
-
-    UINT_32 GetPipeLog2ForMetaAddressing(BOOL_32 pipeAligned, AddrSwizzleMode swizzleMode) const
-    {
-        UINT_32 numPipeLog2 = pipeAligned ? Min(m_pipesLog2 + m_seLog2, 5u) : 0;
-
-        if (IsXor(swizzleMode))
-        {
-            UINT_32 maxPipeLog2 = GetBlockSizeLog2(swizzleMode) - m_pipeInterleaveLog2;
-
-            numPipeLog2 = Min(numPipeLog2, maxPipeLog2);
-        }
-
-        return numPipeLog2;
-    }
-
-    UINT_32 GetPipeNumForMetaAddressing(BOOL_32 pipeAligned, AddrSwizzleMode swizzleMode) const
-    {
-        return (1 << GetPipeLog2ForMetaAddressing(pipeAligned, swizzleMode));
-    }
-
-    VOID VerifyMipLevelInfo(const ADDR2_COMPUTE_SURFACE_INFO_INPUT* pIn) const
-    {
-#if DEBUG
-        if (pIn->numMipLevels > 1)
-        {
-            UINT_32 actualMipLevels = 1;
-            switch (pIn->resourceType)
-            {
-                case ADDR_RSRC_TEX_3D:
-                    // Fall through to share 2D case
-                    actualMipLevels = Max(actualMipLevels, Log2NonPow2(pIn->numSlices) + 1);
-                case ADDR_RSRC_TEX_2D:
-                    // Fall through to share 1D case
-                    actualMipLevels = Max(actualMipLevels, Log2NonPow2(pIn->height) + 1);
-                case ADDR_RSRC_TEX_1D:
-                    // Base 1D case
-                    actualMipLevels = Max(actualMipLevels, Log2NonPow2(pIn->width) + 1);
-                    break;
-                default:
-                    ADDR_ASSERT_ALWAYS();
-                    break;
-            }
-            // Client pass wrong number of MipLevels to addrlib and result will be bad.
-            // Not sure if we should fail this calling instead of putting an assertion here.
-            ADDR_ASSERT(actualMipLevels >= pIn->numMipLevels);
-        }
-#endif
-    }
-
-    ADDR_E_RETURNCODE ApplyCustomerPipeBankXor(
-        AddrSwizzleMode swizzleMode,
-        UINT_32         pipeBankXor,
-        UINT_32         bankBits,
-        UINT_32         pipeBits,
-        UINT_32*        pBlockOffset) const
-    {
-        ADDR_E_RETURNCODE returnCode = ADDR_OK;
-
-        if (IsXor(swizzleMode))
-        {
-            // Apply driver set bankPipeXor
-            UINT_32 bankX = 0;
-            UINT_32 pipeX = 0;
-            returnCode = ExtractPipeBankXor(pipeBankXor, bankBits, pipeBits, &bankX, &pipeX);
-            *pBlockOffset ^= (pipeX << m_pipeInterleaveLog2);
-            *pBlockOffset ^= (bankX << (m_pipeInterleaveLog2 + pipeBits));
-        }
-
-        return returnCode;
-    }
-
-    UINT_32 GetPipeXorBits(UINT_32 macroBlockBits) const;
-    UINT_32 GetBankXorBits(UINT_32 macroBlockBits) const;
-
-    ADDR_E_RETURNCODE ApplyCustomizedPitchHeight(
-        const ADDR2_COMPUTE_SURFACE_INFO_INPUT* pIn,
-        UINT_32  elementBytes,
-        UINT_32  pitchAlignInElement,
-        UINT_32* pPitch,
-        UINT_32* pHeight) const;
-
-    VOID ComputeQbStereoInfo(ADDR2_COMPUTE_SURFACE_INFO_OUTPUT* pOut) const;
-
-    UINT_32 m_se;                       ///< Number of shader engine
-    UINT_32 m_rbPerSe;                  ///< Number of render backend per shader engine
-    UINT_32 m_maxCompFrag;              ///< Number of max compressed fragment
-
-    UINT_32 m_banksLog2;                ///< Number of bank Log2
-    UINT_32 m_pipesLog2;                ///< Number of pipe per shader engine Log2
-    UINT_32 m_seLog2;                   ///< Number of shader engine Log2
-    UINT_32 m_rbPerSeLog2;              ///< Number of render backend per shader engine Log2
-    UINT_32 m_maxCompFragLog2;          ///< Number of max compressed fragment Log2
-
-    UINT_32 m_pipeInterleaveLog2;       ///< Log2 of pipe interleave bytes
-
-    UINT_32 m_blockVarSizeLog2;         ///< Log2 of block var size
-
-    SwizzleModeFlags m_swizzleModeTable[ADDR_SW_MAX_TYPE];  ///< Swizzle mode table
-
-private:
-    // Disallow the copy constructor
-    Lib(const Lib& a);
-
-    // Disallow the assignment operator
-    Lib& operator=(const Lib& a);
-};
-
-} // V2
-} // Addr
-
-#endif
-

src/amd/addrlib/core/addrobject.cpp

@@ -25,27 +25,24 @@
  */
 
 /**
-****************************************************************************************************
+***************************************************************************************************
 * @file  addrobject.cpp
-* @brief Contains the Object base class implementation.
-****************************************************************************************************
+* @brief Contains the AddrObject base class implementation.
+***************************************************************************************************
 */
 
 #include "addrinterface.h"
 #include "addrobject.h"
 
-namespace Addr
-{
-
 /**
-****************************************************************************************************
-*   Object::Object
+***************************************************************************************************
+*   AddrObject::AddrObject
 *
 *   @brief
-*       Constructor for the Object class.
-****************************************************************************************************
+*       Constructor for the AddrObject class.
+***************************************************************************************************
 */
-Object::Object()
+AddrObject::AddrObject()
 {
     m_client.handle = NULL;
     m_client.callbacks.allocSysMem = NULL;
@@ -54,41 +51,41 @@ Object::Object()
 }
 
 /**
-****************************************************************************************************
-*   Object::Object
+***************************************************************************************************
+*   AddrObject::AddrObject
 *
 *   @brief
-*       Constructor for the Object class.
-****************************************************************************************************
+*       Constructor for the AddrObject class.
+***************************************************************************************************
 */
-Object::Object(const Client* pClient)
+AddrObject::AddrObject(const AddrClient* pClient)
 {
     m_client = *pClient;
 }
 
 /**
-****************************************************************************************************
-*   Object::~Object
+***************************************************************************************************
+*   AddrObject::~AddrObject
 *
 *   @brief
-*       Destructor for the Object class.
-****************************************************************************************************
+*       Destructor for the AddrObject class.
+***************************************************************************************************
 */
-Object::~Object()
+AddrObject::~AddrObject()
 {
 }
 
 /**
-****************************************************************************************************
-*   Object::ClientAlloc
+***************************************************************************************************
+*   AddrObject::ClientAlloc
 *
 *   @brief
-*       Calls instanced allocSysMem inside Client
-****************************************************************************************************
+*       Calls instanced allocSysMem inside AddrClient
+***************************************************************************************************
 */
-VOID* Object::ClientAlloc(
-    size_t         objSize,    ///< [in] Size to allocate
-    const Client*  pClient)    ///< [in] Client pointer
+VOID* AddrObject::ClientAlloc(
+    size_t             objSize,    ///< [in] Size to allocate
+    const AddrClient*  pClient)    ///< [in] Client pointer
 {
     VOID* pObjMem = NULL;
 
@@ -108,31 +105,30 @@ VOID* Object::ClientAlloc(
 }
 
 /**
-****************************************************************************************************
-*   Object::Alloc
+***************************************************************************************************
+*   AddrObject::AddrMalloc
 *
 *   @brief
 *       A wrapper of ClientAlloc
-****************************************************************************************************
+***************************************************************************************************
 */
-VOID* Object::Alloc(
-    size_t objSize      ///< [in] Size to allocate
-    ) const
+VOID* AddrObject::AddrMalloc(
+    size_t objSize) const   ///< [in] Size to allocate
 {
     return ClientAlloc(objSize, &m_client);
 }
 
 /**
-****************************************************************************************************
-*   Object::ClientFree
+***************************************************************************************************
+*   AddrObject::ClientFree
 *
 *   @brief
-*       Calls freeSysMem inside Client
-****************************************************************************************************
+*       Calls freeSysMem inside AddrClient
+***************************************************************************************************
 */
-VOID Object::ClientFree(
-    VOID*          pObjMem,    ///< [in] User virtual address to free.
-    const Client*  pClient)    ///< [in] Client pointer
+VOID AddrObject::ClientFree(
+    VOID*              pObjMem,    ///< [in] User virtual address to free.
+    const AddrClient*  pClient)    ///< [in] Client pointer
 {
     if (pClient->callbacks.freeSysMem != NULL)
     {
@@ -150,68 +146,82 @@ VOID Object::ClientFree(
 }
 
 /**
-****************************************************************************************************
-*   Object::Free
+***************************************************************************************************
+*   AddrObject::AddrFree
 *
 *   @brief
 *       A wrapper of ClientFree
-****************************************************************************************************
+***************************************************************************************************
 */
-VOID Object::Free(
-    VOID* pObjMem       ///< [in] User virtual address to free.
-    ) const
+VOID AddrObject::AddrFree(
+    VOID* pObjMem) const                 ///< [in] User virtual address to free.
 {
     ClientFree(pObjMem, &m_client);
 }
 
 /**
-****************************************************************************************************
-*   Object::operator new
+***************************************************************************************************
+*   AddrObject::operator new
 *
 *   @brief
-*       Placement new operator. (with pre-allocated memory pointer)
+*       Allocates memory needed for AddrObject object. (with ADDR_CLIENT_HANDLE)
 *
 *   @return
-*       Returns pre-allocated memory pointer.
-****************************************************************************************************
+*       Returns NULL if unsuccessful.
+***************************************************************************************************
 */
-VOID* Object::operator new(
-    size_t objSize,     ///< [in] Size to allocate
-    VOID*  pMem)        ///< [in] Pre-allocated pointer
+VOID* AddrObject::operator new(
+    size_t             objSize,    ///< [in] Size to allocate
+    const AddrClient*  pClient)    ///< [in] Client pointer
 {
-    return pMem;
+    return ClientAlloc(objSize, pClient);
+}
+
+
+/**
+***************************************************************************************************
+*   AddrObject::operator delete
+*
+*   @brief
+*       Frees AddrObject object memory.
+***************************************************************************************************
+*/
+VOID AddrObject::operator delete(
+    VOID* pObjMem,              ///< [in] User virtual address to free.
+    const AddrClient* pClient)  ///< [in] Client handle
+{
+    ClientFree(pObjMem, pClient);
 }
 
 /**
-****************************************************************************************************
-*   Object::operator delete
+***************************************************************************************************
+*   AddrObject::operator delete
 *
 *   @brief
-*       Frees Object object memory.
-****************************************************************************************************
+*       Frees AddrObject object memory.
+***************************************************************************************************
 */
-VOID Object::operator delete(
-    VOID* pObjMem)      ///< [in] User virtual address to free.
+VOID AddrObject::operator delete(
+    VOID* pObjMem)                  ///< [in] User virtual address to free.
 {
-    Object* pObj = static_cast<Object*>(pObjMem);
+    AddrObject* pObj = static_cast<AddrObject*>(pObjMem);
     ClientFree(pObjMem, &pObj->m_client);
 }
 
 /**
-****************************************************************************************************
-*   Object::DebugPrint
+***************************************************************************************************
+*   AddrObject::DebugPrint
 *
 *   @brief
 *       Print debug message
 *
 *   @return
 *       N/A
-****************************************************************************************************
+***************************************************************************************************
 */
-VOID Object::DebugPrint(
+VOID AddrObject::DebugPrint(
     const CHAR* pDebugString,     ///< [in] Debug string
-    ...
-    ) const
+    ...) const
 {
 #if DEBUG
     if (m_client.callbacks.debugPrint != NULL)
@@ -234,4 +244,3 @@ VOID Object::DebugPrint(
 #endif
 }
 
-} // Addr