Use the BATCH_SZ macro where appropriate.

Bump driver date.

.emacs-dirvars

@@ -1,10 +0,0 @@
-;; -*- emacs-lisp -*-
-;;
-;; This file is processed by the dirvars emacs package.  Each variable
-;; setting below is performed when this dirvars file is loaded.
-;;
-indent-tabs-mode: nil
-tab-width: 8
-c-basic-offset: 3
-kde-emacs-after-parent-string: ""
-evaluate: (c-set-offset 'inline-open '0)

.gitattributes

@@ -1,4 +0,0 @@
-*.dsp -crlf
-*.dsw -crlf
-*.sln -crlf
-*.vcproj -crlf

.gitignore

@@ -1,26 +0,0 @@
-*.a
-*.dll
-*.exe
-*.ilk
-*.o
-*.obj
-*.pc
-*.pdb
-*.pyc
-*.pyo
-*.so
-*.sw[a-z]
-*~
-depend
-depend.bak
-lib
-lib64
-configure
-autom4te.cache
-aclocal.m4
-config.log
-config.status
-cscope*
-.scon*
-config.py
-build

Makefile

@@ -7,61 +7,48 @@ SUBDIRS = src progs
 
 default: $(TOP)/configs/current
 	@for dir in $(SUBDIRS) ; do \
-		if [ -d $$dir ] ; then \
-			(cd $$dir && $(MAKE)) || exit 1 ; \
-		fi \
+		(cd $$dir ; $(MAKE)) || exit 1 ; \
 	done
 
-all: default
-
 
 doxygen:
-	cd doxygen && $(MAKE)
+	(cd doxygen ; make) ; \
 
 clean:
-	-@touch $(TOP)/configs/current
-	-@for dir in $(SUBDIRS) ; do \
-		if [ -d $$dir ] ; then \
-			(cd $$dir && $(MAKE) clean) ; \
-		fi \
+	@for dir in $(SUBDIRS) ; do \
+		(cd $$dir ; $(MAKE) clean) ; \
 	done
-	-@test -s $(TOP)/configs/current || rm -f $(TOP)/configs/current
 
 
-realclean: clean
+realclean:
+	touch $(TOP)/configs/current
+	$(MAKE) clean
 	-rm -rf lib*
 	-rm -f $(TOP)/configs/current
-	-rm -f $(TOP)/configs/autoconf
-	-rm -rf autom4te.cache
-	-find . '(' -name '*.o' -o -name '*.a' -o -name '*.so' -o \
-	  -name depend -o -name depend.bak ')' -exec rm -f '{}' ';'
+	-rm -f `find . -name \*.o`
+	-rm -f `find . -name \*.a`
+	-rm -f `find . -name \*.so`
+	-rm -f `find . -name depend`
 
 
-distclean: realclean
-
 
 install:
 	@for dir in $(SUBDIRS) ; do \
-		if [ -d $$dir ] ; then \
-			(cd $$dir && $(MAKE) install) || exit 1 ; \
-		fi \
+		(cd $$dir ; $(MAKE) install) || exit 1 ; \
 	done
 
-
-.PHONY: default doxygen clean realclean distclean install linux-directfb-install
+# DirectFBGL module installation
+linux-directfb-install:
+	cd src/mesa/drivers/directfb && $(MAKE) install
 
 # If there's no current configuration file
 $(TOP)/configs/current:
 	@echo
 	@echo
 	@echo "Please choose a configuration from the following list:"
-	@ls -1 $(TOP)/configs | grep -v "current\|default\|CVS\|autoconf.*"
+	@ls -1 $(TOP)/configs | grep -v "current\|default\|CVS"
 	@echo
 	@echo "Then type 'make <config>' (ex: 'make linux-x86')"
-	@echo
-	@echo "Or, run './configure' then 'make'"
-	@echo "See './configure --help' for details"
-	@echo
 	@echo "(ignore the following error message)"
 	@exit 1
 
@@ -72,16 +59,11 @@ aix-64 \
 aix-64-static \
 aix-gcc \
 aix-static \
-autoconf \
-bluegene-osmesa \
-bluegene-xlc-osmesa \
 beos \
-catamount-osmesa-pgi \
 darwin \
-darwin-fat-32bit \
-darwin-fat-all \
 darwin-static \
 darwin-static-x86ppc \
+darwin-x86ppc \
 freebsd \
 freebsd-dri \
 freebsd-dri-amd64 \
@@ -107,17 +89,13 @@ irix6-o32-static \
 linux \
 linux-alpha \
 linux-alpha-static \
-linux-cell \
-linux-cell-debug \
 linux-debug \
 linux-directfb \
 linux-dri \
-linux-dri-debug \
 linux-dri-x86 \
 linux-dri-x86-64 \
 linux-dri-ppc \
 linux-dri-xcb \
-linux-egl \
 linux-indirect \
 linux-fbdev \
 linux-glide \
@@ -125,15 +103,12 @@ linux-ia64-icc \
 linux-ia64-icc-static \
 linux-icc \
 linux-icc-static \
-linux-llvm \
 linux-osmesa \
-linux-osmesa-static \
 linux-osmesa16 \
 linux-osmesa16-static \
 linux-osmesa32 \
 linux-ppc \
 linux-ppc-static \
-linux-profile \
 linux-solo \
 linux-solo-x86 \
 linux-solo-ia64 \
@@ -147,10 +122,8 @@ linux-x86-debug \
 linux-x86-32 \
 linux-x86-64 \
 linux-x86-64-debug \
-linux-x86-64-profile \
 linux-x86-64-static \
 linux-x86-glide \
-linux-x86-profile \
 linux-x86-static \
 netbsd \
 openbsd \
@@ -170,44 +143,36 @@ sunos5-v8 \
 sunos5-v8-static \
 sunos5-v9 \
 sunos5-v9-static \
-sunos5-v9-cc-g++ \
 ultrix-gcc:
-	@ if test -f configs/current || test -L configs/current ; then \
-		echo "Please run 'make realclean' before changing configs" ; \
-		exit 1 ; \
-	fi
 	(cd configs && rm -f current && ln -s $@ current)
 	$(MAKE) default
 
 
 # Rules for making release tarballs
 
-VERSION=7.7.1-devel
-DIRECTORY = Mesa-$(VERSION)
-LIB_NAME = MesaLib-$(VERSION)
-DEMO_NAME = MesaDemos-$(VERSION)
-GLUT_NAME = MesaGLUT-$(VERSION)
+DIRECTORY = Mesa-6.5.1
+LIB_NAME = MesaLib-6.5.1
+DEMO_NAME = MesaDemos-6.5.1
+GLUT_NAME = MesaGLUT-6.5.1
 
 MAIN_FILES = \
 	$(DIRECTORY)/Makefile*						\
-	$(DIRECTORY)/configure						\
-	$(DIRECTORY)/configure.ac					\
-	$(DIRECTORY)/acinclude.m4					\
-	$(DIRECTORY)/aclocal.m4						\
-	$(DIRECTORY)/bin/config.guess					\
-	$(DIRECTORY)/bin/config.sub					\
-	$(DIRECTORY)/bin/install-sh					\
+	$(DIRECTORY)/descrip.mms					\
+	$(DIRECTORY)/mms-config.					\
 	$(DIRECTORY)/bin/mklib						\
-	$(DIRECTORY)/bin/minstall					\
-	$(DIRECTORY)/bin/version.mk					\
+	$(DIRECTORY)/bin/installmesa					\
 	$(DIRECTORY)/configs/[a-z]*					\
 	$(DIRECTORY)/docs/*.html					\
 	$(DIRECTORY)/docs/COPYING					\
 	$(DIRECTORY)/docs/README.*					\
 	$(DIRECTORY)/docs/RELNOTES*					\
+	$(DIRECTORY)/docs/VERSIONS					\
 	$(DIRECTORY)/docs/*.spec					\
 	$(DIRECTORY)/include/GL/internal/glcore.h			\
+	$(DIRECTORY)/include/GL/amesa.h					\
 	$(DIRECTORY)/include/GL/dmesa.h					\
+	$(DIRECTORY)/include/GL/directfbgl.h				\
+	$(DIRECTORY)/include/GL/fxmesa.h				\
 	$(DIRECTORY)/include/GL/ggimesa.h				\
 	$(DIRECTORY)/include/GL/gl.h					\
 	$(DIRECTORY)/include/GL/glext.h					\
@@ -222,43 +187,43 @@ MAIN_FILES = \
 	$(DIRECTORY)/include/GL/mglmesa.h				\
 	$(DIRECTORY)/include/GL/osmesa.h				\
 	$(DIRECTORY)/include/GL/svgamesa.h				\
+	$(DIRECTORY)/include/GL/ugl*.h					\
 	$(DIRECTORY)/include/GL/vms_x_fix.h				\
-	$(DIRECTORY)/include/GL/wglext.h				\
 	$(DIRECTORY)/include/GL/wmesa.h					\
+	$(DIRECTORY)/include/GL/xmesa.h					\
+	$(DIRECTORY)/include/GL/xmesa_x.h				\
+	$(DIRECTORY)/include/GL/xmesa_xf86.h				\
+	$(DIRECTORY)/include/GLView.h					\
 	$(DIRECTORY)/src/Makefile					\
+	$(DIRECTORY)/src/descrip.mms					\
 	$(DIRECTORY)/src/mesa/Makefile*					\
-	$(DIRECTORY)/src/mesa/sources.mak				\
+	$(DIRECTORY)/src/mesa/sources					\
 	$(DIRECTORY)/src/mesa/descrip.mms				\
-	$(DIRECTORY)/src/mesa/gl.pc.in					\
-	$(DIRECTORY)/src/mesa/osmesa.pc.in				\
 	$(DIRECTORY)/src/mesa/depend					\
 	$(DIRECTORY)/src/mesa/main/*.[chS]				\
 	$(DIRECTORY)/src/mesa/main/descrip.mms				\
 	$(DIRECTORY)/src/mesa/glapi/*.[chS]				\
+	$(DIRECTORY)/src/mesa/glapi/descrip.mms				\
+	$(DIRECTORY)/src/mesa/array_cache/*.[ch]			\
+	$(DIRECTORY)/src/mesa/array_cache/descrip.mms			\
 	$(DIRECTORY)/src/mesa/math/*.[ch]				\
 	$(DIRECTORY)/src/mesa/math/descrip.mms				\
-	$(DIRECTORY)/src/mesa/shader/*.[chly]				\
-	$(DIRECTORY)/src/mesa/shader/Makefile				\
+	$(DIRECTORY)/src/mesa/shader/*.[ch]				\
 	$(DIRECTORY)/src/mesa/shader/descrip.mms			\
 	$(DIRECTORY)/src/mesa/shader/grammar/*.[ch]			\
+	$(DIRECTORY)/src/mesa/shader/grammar/descrip.mms		\
 	$(DIRECTORY)/src/mesa/shader/slang/*.[ch]			\
 	$(DIRECTORY)/src/mesa/shader/slang/descrip.mms			\
 	$(DIRECTORY)/src/mesa/shader/slang/library/*.[ch]		\
-	$(DIRECTORY)/src/mesa/shader/slang/library/*.gc			\
-	$(DIRECTORY)/src/mesa/shader/slang/library/*.syn		\
-	$(DIRECTORY)/src/mesa/shader/slang/library/Makefile		\
 	$(DIRECTORY)/src/mesa/swrast/*.[ch]				\
 	$(DIRECTORY)/src/mesa/swrast/descrip.mms			\
 	$(DIRECTORY)/src/mesa/swrast_setup/*.[ch]			\
 	$(DIRECTORY)/src/mesa/swrast_setup/descrip.mms			\
-	$(DIRECTORY)/src/mesa/vbo/*.[chS]				\
-	$(DIRECTORY)/src/mesa/vbo/descrip.mms				\
 	$(DIRECTORY)/src/mesa/tnl/*.[chS]				\
 	$(DIRECTORY)/src/mesa/tnl/descrip.mms				\
 	$(DIRECTORY)/src/mesa/tnl_dd/*.[ch]				\
 	$(DIRECTORY)/src/mesa/tnl_dd/imm/*.[ch]				\
 	$(DIRECTORY)/src/mesa/tnl_dd/imm/NOTES.imm			\
-	$(DIRECTORY)/src/mesa/drivers/Makefile				\
 	$(DIRECTORY)/src/mesa/drivers/beos/*.cpp			\
 	$(DIRECTORY)/src/mesa/drivers/beos/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/common/*.[ch]			\
@@ -266,7 +231,6 @@ MAIN_FILES = \
 	$(DIRECTORY)/src/mesa/drivers/directfb/*.[ch]			\
 	$(DIRECTORY)/src/mesa/drivers/directfb/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/dos/*.[chS]			\
-	$(DIRECTORY)/src/mesa/drivers/fbdev/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/fbdev/glfbdev.c			\
 	$(DIRECTORY)/src/mesa/drivers/glide/*.[ch]			\
 	$(DIRECTORY)/src/mesa/drivers/ggi/*.[ch]			\
@@ -276,7 +240,6 @@ MAIN_FILES = \
 	$(DIRECTORY)/src/mesa/drivers/ggi/display/*.c			\
 	$(DIRECTORY)/src/mesa/drivers/ggi/display/fbdev.conf.in		\
 	$(DIRECTORY)/src/mesa/drivers/ggi/include/ggi/mesa/*.h		\
-	$(DIRECTORY)/src/mesa/drivers/osmesa/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/osmesa/Makefile.win		\
 	$(DIRECTORY)/src/mesa/drivers/osmesa/descrip.mms		\
 	$(DIRECTORY)/src/mesa/drivers/osmesa/osmesa.def			\
@@ -284,11 +247,8 @@ MAIN_FILES = \
 	$(DIRECTORY)/src/mesa/drivers/svga/*.[ch]			\
 	$(DIRECTORY)/src/mesa/drivers/windows/*/*.[ch]			\
 	$(DIRECTORY)/src/mesa/drivers/windows/*/*.def			\
-	$(DIRECTORY)/src/mesa/drivers/x11/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/x11/descrip.mms			\
 	$(DIRECTORY)/src/mesa/drivers/x11/*.[ch]			\
-	$(DIRECTORY)/src/mesa/drivers/glslcompiler/Makefile		\
-	$(DIRECTORY)/src/mesa/drivers/glslcompiler/glslcompiler.c	\
 	$(DIRECTORY)/src/mesa/ppc/*.[ch]				\
 	$(DIRECTORY)/src/mesa/sparc/*.[chS]				\
 	$(DIRECTORY)/src/mesa/x86/Makefile				\
@@ -301,68 +261,45 @@ MAIN_FILES = \
 	$(DIRECTORY)/progs/util/README					\
 	$(DIRECTORY)/progs/util/*.[ch]					\
 	$(DIRECTORY)/progs/util/sampleMakefile				\
-	$(DIRECTORY)/windows/VC8/
-
-EGL_FILES = \
-	$(DIRECTORY)/include/EGL/*.h					\
-	$(DIRECTORY)/include/GLES/*.h					\
-	$(DIRECTORY)/include/GLES2/*.h					\
-	$(DIRECTORY)/src/egl/Makefile					\
-	$(DIRECTORY)/src/egl/*/Makefile					\
-	$(DIRECTORY)/src/egl/*/*.[ch]					\
-	$(DIRECTORY)/src/egl/*/*/Makefile				\
-	$(DIRECTORY)/src/egl/*/*/*.[ch]					\
-
-GALLIUM_FILES = \
-	$(DIRECTORY)/src/mesa/state_tracker/*[ch]			\
-	$(DIRECTORY)/src/gallium/Makefile				\
-	$(DIRECTORY)/src/gallium/Makefile.template			\
-	$(DIRECTORY)/src/gallium/SConscript				\
-	$(DIRECTORY)/src/gallium/*/Makefile				\
-	$(DIRECTORY)/src/gallium/*/SConscript				\
-	$(DIRECTORY)/src/gallium/*/*/Makefile				\
-	$(DIRECTORY)/src/gallium/*/*/Makefile.template			\
-	$(DIRECTORY)/src/gallium/*/*/SConscript				\
-	$(DIRECTORY)/src/gallium/*/*/*.[ch]				\
-	$(DIRECTORY)/src/gallium/*/*/*.py				\
-	$(DIRECTORY)/src/gallium/*/*/*.csv				\
-	$(DIRECTORY)/src/gallium/*/*/*/Makefile				\
-	$(DIRECTORY)/src/gallium/*/*/*/SConscript			\
-	$(DIRECTORY)/src/gallium/*/*/*/*.[ch]				\
-	$(DIRECTORY)/src/gallium/*/*/*/*.py				\
-	$(DIRECTORY)/src/gallium/*/*/*/*/Makefile			\
-	$(DIRECTORY)/src/gallium/*/*/*/*/*.[ch]				\
-
+	$(DIRECTORY)/vms/analyze_map.com				\
+	$(DIRECTORY)/vms/xlib.opt					\
+	$(DIRECTORY)/vms/xlib_share.opt					\
+	$(DIRECTORY)/windows/VC6/mesa/gdi/gdi.dsp			\
+	$(DIRECTORY)/windows/VC6/mesa/glu/*.txt				\
+	$(DIRECTORY)/windows/VC6/mesa/glu/glu.dsp			\
+	$(DIRECTORY)/windows/VC6/mesa/mesa.dsw				\
+	$(DIRECTORY)/windows/VC6/mesa/mesa/mesa.dsp			\
+	$(DIRECTORY)/windows/VC6/mesa/osmesa/osmesa.dsp			\
+	$(DIRECTORY)/windows/VC7/mesa/gdi/gdi.vcproj			\
+	$(DIRECTORY)/windows/VC7/mesa/glu/glu.vcproj			\
+	$(DIRECTORY)/windows/VC7/mesa/mesa.sln				\
+	$(DIRECTORY)/windows/VC7/mesa/mesa/mesa.vcproj			\
+	$(DIRECTORY)/windows/VC7/mesa/osmesa/osmesa.vcproj
 
 DRI_FILES = \
 	$(DIRECTORY)/include/GL/internal/dri_interface.h		\
-	$(DIRECTORY)/include/GL/internal/glcore.h			\
 	$(DIRECTORY)/include/GL/internal/sarea.h			\
 	$(DIRECTORY)/src/glx/Makefile					\
 	$(DIRECTORY)/src/glx/x11/Makefile				\
 	$(DIRECTORY)/src/glx/x11/*.[ch]					\
 	$(DIRECTORY)/src/mesa/drivers/dri/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/dri/Makefile.template		\
-	$(DIRECTORY)/src/mesa/drivers/dri/dri.pc.in			\
 	$(DIRECTORY)/src/mesa/drivers/dri/common/xmlpool/*.[ch]		\
 	$(DIRECTORY)/src/mesa/drivers/dri/common/xmlpool/*.po		\
 	$(DIRECTORY)/src/mesa/drivers/dri/*/*.[chS]			\
-	$(DIRECTORY)/src/mesa/drivers/dri/*/*/*.[chS]			\
 	$(DIRECTORY)/src/mesa/drivers/dri/*/Makefile			\
-	$(DIRECTORY)/src/mesa/drivers/dri/*/*/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/dri/*/Doxyfile			\
 	$(DIRECTORY)/src/mesa/drivers/dri/*/server/*.[ch]
 
 SGI_GLU_FILES = \
 	$(DIRECTORY)/src/glu/Makefile					\
-	$(DIRECTORY)/src/glu/glu.pc.in					\
+	$(DIRECTORY)/src/glu/descrip.mms				\
 	$(DIRECTORY)/src/glu/sgi/Makefile				\
-	$(DIRECTORY)/src/glu/sgi/Makefile.mgw				\
 	$(DIRECTORY)/src/glu/sgi/Makefile.win				\
+	$(DIRECTORY)/src/glu/sgi/Makefile.DJ				\
 	$(DIRECTORY)/src/glu/sgi/glu.def				\
 	$(DIRECTORY)/src/glu/sgi/dummy.cc				\
-	$(DIRECTORY)/src/glu/sgi/glu.exports				\
-	$(DIRECTORY)/src/glu/sgi/glu.exports.darwin			\
+	$(DIRECTORY)/src/glu/sgi/descrip.mms				\
 	$(DIRECTORY)/src/glu/sgi/mesaglu.opt				\
 	$(DIRECTORY)/src/glu/sgi/include/gluos.h			\
 	$(DIRECTORY)/src/glu/sgi/libnurbs/interface/*.h			\
@@ -389,20 +326,9 @@ GLW_FILES = \
 	$(DIRECTORY)/src/glw/*.[ch]			\
 	$(DIRECTORY)/src/glw/Makefile*			\
 	$(DIRECTORY)/src/glw/README			\
-	$(DIRECTORY)/src/glw/glw.pc.in			\
 	$(DIRECTORY)/src/glw/depend
 
-GLEW_FILES = \
-	$(DIRECTORY)/include/GL/glew.h			\
-	$(DIRECTORY)/include/GL/glxew.h			\
-	$(DIRECTORY)/include/GL/wglew.h			\
-	$(DIRECTORY)/src/glew/*.c			\
-	$(DIRECTORY)/src/glew/Makefile			\
-	$(DIRECTORY)/src/glew/SConscript		\
-	$(DIRECTORY)/src/glew/LICENSE.txt
-
 DEMO_FILES = \
-	$(GLEW_FILES)					\
 	$(DIRECTORY)/progs/beos/*.cpp			\
 	$(DIRECTORY)/progs/beos/Makefile		\
 	$(DIRECTORY)/progs/images/*.rgb			\
@@ -413,17 +339,10 @@ DEMO_FILES = \
 	$(DIRECTORY)/progs/demos/*.cxx			\
 	$(DIRECTORY)/progs/demos/*.dat			\
 	$(DIRECTORY)/progs/demos/README			\
-	$(DIRECTORY)/progs/fbdev/Makefile		\
-	$(DIRECTORY)/progs/fbdev/glfbdevtest.c		\
-	$(DIRECTORY)/progs/objviewer/*.[ch]		\
-	$(DIRECTORY)/progs/objviewer/*.obj		\
-	$(DIRECTORY)/progs/objviewer/*.mtl		\
-	$(DIRECTORY)/progs/objviewer/*.rgb		\
-	$(DIRECTORY)/progs/objviewer/Makefile		\
-	$(DIRECTORY)/progs/objviewer/README.txt		\
 	$(DIRECTORY)/progs/osdemos/Makefile		\
 	$(DIRECTORY)/progs/osdemos/*.c			\
 	$(DIRECTORY)/progs/xdemos/Makefile*		\
+	$(DIRECTORY)/progs/xdemos/descrip.mms		\
 	$(DIRECTORY)/progs/xdemos/*.[chf]		\
 	$(DIRECTORY)/progs/redbook/Makefile*		\
 	$(DIRECTORY)/progs/redbook/README		\
@@ -431,38 +350,37 @@ DEMO_FILES = \
 	$(DIRECTORY)/progs/samples/Makefile*		\
 	$(DIRECTORY)/progs/samples/README		\
 	$(DIRECTORY)/progs/samples/*.c			\
-	$(DIRECTORY)/progs/glsl/Makefile*		\
-	$(DIRECTORY)/progs/glsl/*.c			\
-	$(DIRECTORY)/progs/glsl/*.frag			\
-	$(DIRECTORY)/progs/glsl/*.vert			\
-	$(DIRECTORY)/progs/glsl/*.shtest		\
 	$(DIRECTORY)/progs/windml/Makefile.ugl		\
 	$(DIRECTORY)/progs/windml/*.c			\
 	$(DIRECTORY)/progs/windml/*.bmp			\
-	$(DIRECTORY)/progs/ggi/*.c
+	$(DIRECTORY)/progs/ggi/*.c			\
+	$(DIRECTORY)/windows/VC6/progs/demos/*.dsp	\
+	$(DIRECTORY)/windows/VC6/progs/progs.dsw	\
+	$(DIRECTORY)/windows/VC7/progs/demos/*.vcproj	\
+	$(DIRECTORY)/windows/VC7/progs/progs.sln
 
 GLUT_FILES = \
 	$(DIRECTORY)/include/GL/glut.h			\
 	$(DIRECTORY)/include/GL/glutf90.h		\
 	$(DIRECTORY)/src/glut/glx/Makefile*		\
 	$(DIRECTORY)/src/glut/glx/depend		\
-	$(DIRECTORY)/src/glut/glx/glut.pc.in		\
 	$(DIRECTORY)/src/glut/glx/*def			\
+	$(DIRECTORY)/src/glut/glx/descrip.mms		\
+	$(DIRECTORY)/src/glut/glx/mms_depend		\
 	$(DIRECTORY)/src/glut/glx/*.[ch]		\
 	$(DIRECTORY)/src/glut/beos/*.[ch]		\
 	$(DIRECTORY)/src/glut/beos/*.cpp		\
 	$(DIRECTORY)/src/glut/beos/Makefile		\
 	$(DIRECTORY)/src/glut/dos/*.[ch]		\
+	$(DIRECTORY)/src/glut/dos/Makefile.DJ		\
 	$(DIRECTORY)/src/glut/dos/PC_HW/*.[chS]		\
 	$(DIRECTORY)/src/glut/ggi/*.[ch]		\
 	$(DIRECTORY)/src/glut/ggi/Makefile		\
 	$(DIRECTORY)/src/glut/fbdev/Makefile		\
-	$(DIRECTORY)/src/glut/fbdev/*[ch]		\
-	$(DIRECTORY)/src/glut/mini/*[ch]		\
-	$(DIRECTORY)/src/glut/mini/glut.pc.in		\
-	$(DIRECTORY)/src/glut/directfb/Makefile		\
-	$(DIRECTORY)/src/glut/directfb/NOTES		\
-	$(DIRECTORY)/src/glut/directfb/*[ch]
+	$(DIRECTORY)/src/glut/fbdev/cursors.h		\
+	$(DIRECTORY)/src/glut/fbdev/glut_fbdev.c	\
+	$(DIRECTORY)/windows/VC6/progs/glut/glut.dsp	\
+	$(DIRECTORY)/windows/VC7/progs/glut/glut.vcproj
 
 DEPEND_FILES = \
 	$(TOP)/src/mesa/depend		\
@@ -472,41 +390,21 @@ DEPEND_FILES = \
 	$(TOP)/src/glu/sgi/depend
 
 
-LIB_FILES = \
-	$(MAIN_FILES)		\
-	$(EGL_FILES)		\
-	$(GALLIUM_FILES)	\
-	$(DRI_FILES)		\
-	$(SGI_GLU_FILES)	\
-	$(GLW_FILES)
+LIB_FILES = $(MAIN_FILES) $(DRI_FILES) $(SGI_GLU_FILES) $(GLW_FILES)
 
 
 # Everything for new a Mesa release:
-tarballs: rm_depend configure aclocal.m4 lib_gz demo_gz glut_gz \
-	lib_bz2 demo_bz2 glut_bz2 lib_zip demo_zip glut_zip md5
+tarballs: rm_depend lib_gz demo_gz glut_gz lib_bz2 demo_bz2 glut_bz2 lib_zip demo_zip glut_zip md5
 
 
-# Helper for autoconf builds
-ACLOCAL = aclocal
-ACLOCAL_FLAGS =
-AUTOCONF = autoconf
-AC_FLAGS =
-aclocal.m4: configure.ac acinclude.m4
-	$(ACLOCAL) $(ACLOCAL_FLAGS)
-configure: configure.ac aclocal.m4 acinclude.m4
-	$(AUTOCONF) $(AC_FLAGS)
-
 rm_depend:
 	@for dep in $(DEPEND_FILES) ; do \
 		rm -f $$dep ; \
 		touch $$dep ; \
 	done
 
-rm_config:
-	rm -f configs/current
-	rm -f configs/autoconf
-
-lib_gz: rm_config
+lib_gz:
+	rm -f configs/current ; \
 	cd .. ; \
 	tar -cf $(LIB_NAME).tar $(LIB_FILES) ; \
 	gzip $(LIB_NAME).tar ; \
@@ -524,7 +422,8 @@ glut_gz:
 	gzip $(GLUT_NAME).tar ; \
 	mv $(GLUT_NAME).tar.gz $(DIRECTORY)
 
-lib_bz2: rm_config
+lib_bz2:
+	rm -f configs/current ; \
 	cd .. ; \
 	tar -cf $(LIB_NAME).tar $(LIB_FILES) ; \
 	bzip2 $(LIB_NAME).tar ; \
@@ -542,7 +441,8 @@ glut_bz2:
 	bzip2 $(GLUT_NAME).tar ; \
 	mv $(GLUT_NAME).tar.bz2 $(DIRECTORY)
 
-lib_zip: rm_config
+lib_zip:
+	rm -f configs/current ; \
 	rm -f $(LIB_NAME).zip ; \
 	cd .. ; \
 	zip -qr $(LIB_NAME).zip $(LIB_FILES) ; \
@@ -570,8 +470,3 @@ md5:
 	@-md5sum $(GLUT_NAME).tar.gz
 	@-md5sum $(GLUT_NAME).tar.bz2
 	@-md5sum $(GLUT_NAME).zip
-
-.PHONY: tarballs rm_depend rm_config md5 \
-	lib_gz demo_gz glut_gz \
-	lib_bz2 demo_bz2 glut_bz2 \
-	lib_zip demo_zip glut_zip

Makefile.DJ

@@ -0,0 +1,88 @@
+# Mesa 3-D graphics library
+# Version:  4.0
+# 
+# Copyright (C) 1999  Brian Paul   All Rights Reserved.
+# 
+# Permission is hereby granted, free of charge, to any person obtaining a
+# copy of this software and associated documentation files (the "Software"),
+# to deal in the Software without restriction, including without limitation
+# the rights to use, copy, modify, merge, publish, distribute, sublicense,
+# and/or sell copies of the Software, and to permit persons to whom the
+# Software is furnished to do so, subject to the following conditions:
+# 
+# The above copyright notice and this permission notice shall be included
+# in all copies or substantial portions of the Software.
+# 
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+# BRIAN PAUL BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+# DOS/DJGPP makefile for Mesa
+#
+#  Author: Daniel Borca
+#  Email : dborca@users.sourceforge.net
+#  Web   : http://www.geocities.com/dborca
+
+
+#
+#  Available options:
+#
+#    Environment variables:
+#	GLIDE		path to Glide3 SDK; used with FX.
+#			default = $(TOP)/glide3
+#	FX=1		build for 3dfx Glide3. Note that this disables
+#			compilation of most DMesa code and requires fxMesa.
+#			As a consequence, you'll need the DJGPP Glide3
+#			library to build any application.
+#			default = no
+#	X86=1		optimize for x86 (if possible, use MMX, SSE, 3DNow).
+#			default = no
+#
+#    Targets:
+#	all:		build everything
+#	libgl:		build GL
+#	libglu:		build GLU
+#	libglut:	build GLUT
+#	clean:		remove object files
+#	realclean:	remove all generated files
+#
+
+
+
+.PHONY : all libgl libglu libglut clean realclean
+
+CFLAGS = -Wall -W -pedantic
+CFLAGS += -O2 -ffast-math
+
+export CFLAGS
+
+ifeq ($(wildcard $(addsuffix /rm.exe,$(subst ;, ,$(PATH)))),)
+UNLINK = del $(subst /,\,$(1))
+else
+UNLINK = $(RM) $(1)
+endif
+
+all: libgl libglu libglut
+
+libgl: lib
+	$(MAKE) -f Makefile.DJ -C src/mesa
+libglu: lib
+	$(MAKE) -f Makefile.DJ -C src/glu/sgi
+libglut: lib
+	$(MAKE) -f Makefile.DJ -C src/glut/dos
+
+lib:
+	mkdir lib
+
+clean:
+	$(MAKE) -f Makefile.DJ clean -C src/mesa
+	$(MAKE) -f Makefile.DJ clean -C src/glu/mesa
+	$(MAKE) -f Makefile.DJ clean -C src/glu/sgi
+	$(MAKE) -f Makefile.DJ clean -C src/glut/dos
+
+realclean: clean
+	-$(call UNLINK,lib/*.a)
+	-$(call UNLINK,lib/*.dxe)

Makefile.mgw

@@ -0,0 +1,88 @@
+# Mesa 3-D graphics library
+# Version:  4.0
+# 
+# Copyright (C) 1999  Brian Paul   All Rights Reserved.
+# 
+# Permission is hereby granted, free of charge, to any person obtaining a
+# copy of this software and associated documentation files (the "Software"),
+# to deal in the Software without restriction, including without limitation
+# the rights to use, copy, modify, merge, publish, distribute, sublicense,
+# and/or sell copies of the Software, and to permit persons to whom the
+# Software is furnished to do so, subject to the following conditions:
+# 
+# The above copyright notice and this permission notice shall be included
+# in all copies or substantial portions of the Software.
+# 
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+# BRIAN PAUL BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+# MinGW makefile v1.2 for Mesa
+#
+#  Copyright (C) 2002 - Daniel Borca
+#  Email : dborca@users.sourceforge.net
+#  Web   : http://www.geocities.com/dborca
+
+
+#
+#  Available options:
+#
+#    Environment variables:
+#	GLIDE		path to Glide3 SDK; used with FX.
+#			default = $(TOP)/glide3
+#	FX=1		build for 3dfx Glide3. Note that this disables
+#			compilation of most WMesa code and requires fxMesa.
+#			As a consequence, you'll need the Win32 Glide3
+#			library to build any application.
+#			default = no
+#	ICD=1		build the installable client driver interface
+#			(windows opengl driver interface)
+#			default = no
+#	X86=1		optimize for x86 (if possible, use MMX, SSE, 3DNow).
+#			default = no
+#
+#    Targets:
+#	all:		build everything
+#	libgl:		build GL
+#	clean:		remove object files
+#	realclean:	remove all generated files
+#
+
+
+
+.PHONY : all libgl clean realclean
+
+ifeq ($(ICD),1)
+  # when -std=c99 mingw will not define WIN32
+  CFLAGS = -Wall -W -Werror
+else
+  # I love c89
+  CFLAGS = -Wall -W -pedantic
+endif
+CFLAGS += -O2 -ffast-math
+
+export CFLAGS
+
+ifeq ($(wildcard $(addsuffix /rm.exe,$(subst ;, ,$(PATH)))),)
+UNLINK = del $(subst /,\,$(1))
+else
+UNLINK = $(RM) $(1)
+endif
+
+all: libgl
+
+libgl: lib
+	$(MAKE) -f Makefile.mgw -C src/mesa
+
+lib:
+	mkdir lib
+
+clean:
+	$(MAKE) -f Makefile.mgw clean -C src/mesa
+
+realclean: clean
+	-$(call UNLINK,lib/*.a)
+	-$(call UNLINK,lib/*.dll)

SConstruct

@@ -1,169 +0,0 @@
-#######################################################################
-# Top-level SConstruct
-#
-# For example, invoke scons as 
-#
-#   scons debug=1 dri=0 machine=x86
-#
-# to set configuration variables. Or you can write those options to a file
-# named config.py:
-#
-#   # config.py
-#   debug=1
-#   dri=0
-#   machine='x86'
-# 
-# Invoke
-#
-#   scons -h
-#
-# to get the full list of options. See scons manpage for more info.
-#  
-
-import os
-import os.path
-import sys
-
-import common
-
-#######################################################################
-# Configuration options
-
-default_statetrackers = 'mesa'
-
-if common.default_platform in ('linux', 'freebsd', 'darwin'):
-	default_drivers = 'softpipe,failover,svga,i915,trace,identity,llvmpipe'
-	default_winsys = 'xlib'
-elif common.default_platform in ('winddk',):
-	default_drivers = 'softpipe,svga,i915,trace,identity'
-	default_winsys = 'all'
-else:
-	default_drivers = 'all'
-	default_winsys = 'all'
-
-opts = Variables('config.py')
-common.AddOptions(opts)
-opts.Add(ListVariable('statetrackers', 'state trackers to build', default_statetrackers,
-                     ['mesa', 'python', 'xorg']))
-opts.Add(ListVariable('drivers', 'pipe drivers to build', default_drivers,
-                     ['softpipe', 'failover', 'svga', 'i915', 'cell', 'trace', 'r300', 'identity', 'llvmpipe']))
-opts.Add(ListVariable('winsys', 'winsys drivers to build', default_winsys,
-                     ['xlib', 'vmware', 'intel', 'gdi', 'radeon']))
-
-opts.Add(EnumVariable('MSVS_VERSION', 'MS Visual C++ version', None, allowed_values=('7.1', '8.0', '9.0')))
-
-env = Environment(
-	options = opts,
-	tools = ['gallium'],
-	toolpath = ['#scons'],	
-	ENV = os.environ,
-)
-
-Help(opts.GenerateHelpText(env))
-
-# replicate options values in local variables
-debug = env['debug']
-dri = env['dri']
-llvm = env['llvm']
-machine = env['machine']
-platform = env['platform']
-
-# derived options
-x86 = machine == 'x86'
-ppc = machine == 'ppc'
-gcc = platform in ('linux', 'freebsd', 'darwin')
-msvc = platform in ('windows', 'winddk')
-
-Export([
-	'debug', 
-	'x86', 
-	'ppc', 
-	'dri', 
-	'llvm',
-	'platform',
-	'gcc',
-	'msvc',
-])
-
-
-#######################################################################
-# Environment setup
-
-# Includes
-env.Append(CPPPATH = [
-	'#/include',
-	'#/src/gallium/include',
-	'#/src/gallium/auxiliary',
-	'#/src/gallium/drivers',
-])
-
-
-# Posix
-if platform in ('posix', 'linux', 'freebsd', 'darwin'):
-	env.Append(CPPDEFINES = [
-		'_POSIX_SOURCE',
-		('_POSIX_C_SOURCE', '199309L'), 
-		'_SVID_SOURCE',
-		'_BSD_SOURCE', 
-		'_GNU_SOURCE',
-		
-		'PTHREADS',
-		'HAVE_POSIX_MEMALIGN',
-	])
-	if platform == 'darwin':
-		env.Append(CPPDEFINES = ['_DARWIN_C_SOURCE'])
-	env.Append(CPPPATH = ['/usr/X11R6/include'])
-	env.Append(LIBPATH = ['/usr/X11R6/lib'])
-	env.Append(LIBS = [
-		'm',
-		'pthread',
-		'expat',
-		'dl',
-	])
-
-
-# DRI
-if dri:
-	env.ParseConfig('pkg-config --cflags --libs libdrm')
-	env.Append(CPPDEFINES = [
-		('USE_EXTERNAL_DXTN_LIB', '1'), 
-		'IN_DRI_DRIVER',
-		'GLX_DIRECT_RENDERING',
-		'GLX_INDIRECT_RENDERING',
-	])
-
-# LLVM
-if llvm:
-	# See also http://www.scons.org/wiki/UsingPkgConfig
-	env.ParseConfig('llvm-config --cflags --ldflags --libs backend bitreader engine instrumentation interpreter ipo')
-	env.Append(CPPDEFINES = ['MESA_LLVM'])
-        # Force C++ linkage
-	env['LINK'] = env['CXX']
-
-# libGL
-if platform in ('linux', 'freebsd', 'darwin'):
-	env.Append(LIBS = [
-		'X11',
-		'Xext',
-		'Xxf86vm',
-		'Xdamage',
-		'Xfixes',
-	])
-
-# for debugging
-#print env.Dump()
-
-Export('env')
-
-
-#######################################################################
-# Invoke SConscripts
-
-# TODO: Build several variants at the same time?
-# http://www.scons.org/wiki/SimultaneousVariantBuilds
-
-SConscript(
-	'src/SConscript',
-	variant_dir = env['build'],
-	duplicate = 0 # http://www.scons.org/doc/0.97/HTML/scons-user/x2261.html
-)

acinclude.m4

@@ -1,119 +0,0 @@
-# A few convenience macros for Mesa, mostly to keep all the platform
-# specifics out of configure.ac.
-
-# MESA_PIC_FLAGS()
-#
-# Find out whether to build PIC code using the option --enable-pic and
-# the configure enable_static/enable_shared settings. If PIC is needed,
-# figure out the necessary flags for the platform and compiler.
-#
-# The platform checks have been shamelessly taken from libtool and
-# stripped down to just what's needed for Mesa. See _LT_COMPILER_PIC in
-# /usr/share/aclocal/libtool.m4 or
-# http://git.savannah.gnu.org/gitweb/?p=libtool.git;a=blob;f=libltdl/m4/libtool.m4;hb=HEAD
-#
-AC_DEFUN([MESA_PIC_FLAGS],
-[AC_REQUIRE([AC_PROG_CC])dnl
-AC_ARG_VAR([PIC_FLAGS], [compiler flags for PIC code])
-AC_ARG_ENABLE([pic],
-    [AS_HELP_STRING([--disable-pic],
-        [compile PIC objects @<:@default=enabled for shared builds
-        on supported platforms@:>@])],
-    [enable_pic="$enableval"
-    test "x$enable_pic" = x && enable_pic=auto],
-    [enable_pic=auto])
-# disable PIC by default for static builds
-if test "$enable_pic" = auto && test "$enable_static" = yes; then
-    enable_pic=no
-fi
-# if PIC hasn't been explicitly disabled, try to figure out the flags
-if test "$enable_pic" != no; then
-    AC_MSG_CHECKING([for $CC option to produce PIC])
-    # allow the user's flags to override
-    if test "x$PIC_FLAGS" = x; then
-        # see if we're using GCC
-        if test "x$GCC" = xyes; then
-            case "$host_os" in
-            aix*|beos*|cygwin*|irix5*|irix6*|osf3*|osf4*|osf5*)
-                # PIC is the default for these OSes.
-                ;;
-            mingw*|os2*|pw32*)
-                # This hack is so that the source file can tell whether
-                # it is being built for inclusion in a dll (and should
-                # export symbols for example).
-                PIC_FLAGS="-DDLL_EXPORT"
-                ;;
-            darwin*|rhapsody*)
-                # PIC is the default on this platform
-                # Common symbols not allowed in MH_DYLIB files
-                PIC_FLAGS="-fno-common"
-                ;;
-            hpux*)
-                # PIC is the default for IA64 HP-UX and 64-bit HP-UX,
-                # but not for PA HP-UX.
-                case $host_cpu in
-                hppa*64*|ia64*)
-                    ;;
-                *)
-                    PIC_FLAGS="-fPIC"
-                    ;;
-                esac
-                ;;
-            *)
-                # Everyone else on GCC uses -fPIC
-                PIC_FLAGS="-fPIC"
-                ;;
-            esac
-        else # !GCC
-            case "$host_os" in
-            hpux9*|hpux10*|hpux11*)
-                # PIC is the default for IA64 HP-UX and 64-bit HP-UX,
-                # but not for PA HP-UX.
-                case "$host_cpu" in
-                hppa*64*|ia64*)
-                    # +Z the default
-                    ;;
-                *)
-                    PIC_FLAGS="+Z"
-                    ;;
-                esac
-                ;;
-            linux*|k*bsd*-gnu)
-                case `basename "$CC"` in
-                icc*|ecc*|ifort*)
-                    PIC_FLAGS="-KPIC"
-                    ;;
-                pgcc*|pgf77*|pgf90*|pgf95*)
-                    # Portland Group compilers (*not* the Pentium gcc
-                    # compiler, which looks to be a dead project)
-                    PIC_FLAGS="-fpic"
-                    ;;
-                ccc*)
-                    # All Alpha code is PIC.
-                    ;;
-                xl*)
-                    # IBM XL C 8.0/Fortran 10.1 on PPC
-                    PIC_FLAGS="-qpic"
-                    ;;
-                *)
-                    case `$CC -V 2>&1 | sed 5q` in
-                    *Sun\ C*|*Sun\ F*)
-                        # Sun C 5.9 or Sun Fortran
-                        PIC_FLAGS="-KPIC"
-                        ;;
-                    esac
-                esac
-                ;;
-            solaris*)
-                PIC_FLAGS="-KPIC"
-                ;;
-            sunos4*)
-                PIC_FLAGS="-PIC"
-                ;;
-            esac
-        fi # GCC
-    fi # PIC_FLAGS
-    AC_MSG_RESULT([$PIC_FLAGS])
-fi
-AC_SUBST([PIC_FLAGS])
-])# MESA_PIC_FLAGS

autogen.sh

@@ -1,18 +0,0 @@
-#! /bin/sh
-
-srcdir=`dirname "$0"`
-test -z "$srcdir" && srcdir=.
-
-SRCDIR=`(cd "$srcdir" && pwd)`
-ORIGDIR=`pwd`
-
-if test "x$SRCDIR" != "x$ORIGDIR"; then
-	echo "Mesa cannot be built when srcdir != builddir" 1>&2
-	exit 1
-fi
-
-MAKEFLAGS=""
-
-autoreconf -v --install || exit 1
-
-"$srcdir"/configure "$@"

bin/confdiff.sh

@@ -1,48 +0,0 @@
-#!/bin/bash -e
-
-usage()
-{
-	echo "Usage: $0 <target1> <target2>"
-	echo "Highlight differences between Mesa configs"
-	echo "Example:"
-	echo "  $0 linux linux-x86"
-}
-
-die()
-{
-	echo "$@" >&2
-	return 1
-}
-
-case "$1" in
--h|--help) usage; exit 0;;
-esac
-
-[ $# -lt 2 ] && die 2 targets needed. See $0 --help
-target1=$1
-target2=$2
-
-topdir=$(cd "`dirname $0`"/..; pwd)
-cd "$topdir"
-
-[ -f "./configs/$target1" ] || die Missing configs/$target1
-[ -f "./configs/$target2" ] || die Missing configs/$target2
-
-trap 'rm -f "$t1" "$t2"' 0
-
-t1=$(mktemp)
-t2=$(mktemp)
-
-make -f- -n -p <<EOF | sed '/^# Not a target/,/^$/d' > $t1
-TOP = .
-include \$(TOP)/configs/$target1
-default:
-EOF
-
-make -f- -n -p <<EOF | sed '/^# Not a target/,/^$/d' > $t2
-TOP = .
-include \$(TOP)/configs/$target2
-default:
-EOF
-
-diff -pu -I'^#' $t1 $t2

bin/install-sh

@@ -1 +0,0 @@
-minstall

bin/installmesa

@@ -62,10 +62,10 @@ fi
 
 set -v
 
-mkdir -p ${INCLUDE_DIR}
-mkdir -p ${INCLUDE_DIR}/GL
-# NOT YET: mkdir -p ${INCLUDE_DIR}/GLES
-mkdir -p ${LIB_DIR}
+mkdir ${INCLUDE_DIR}
+mkdir ${INCLUDE_DIR}/GL
+# NOT YET: mkdir ${INCLUDE_DIR}/GLES
+mkdir ${LIB_DIR}
 cp -f ${TOP}/include/GL/*.h ${INCLUDE_DIR}/GL
 cp -f ${TOP}/src/glw/*.h ${INCLUDE_DIR}/GL
 # NOT YET: cp -f ${TOP}/include/GLES/*.h ${INCLUDE_DIR}/GLES

bin/minstall

@@ -1,93 +0,0 @@
-#!/bin/sh
-
-
-# A minimal replacement for 'install' that supports installing symbolic links.
-# Only a limited number of options are supported:
-# -d dir          Create a directory
-# -m mode         Sets a file's mode when installing
-
-
-# If these commands aren't portable, we'll need some "if (arch)" type stuff
-SYMLINK="ln -s"
-MKDIR="mkdir -p"
-RM="rm -f"
-
-MODE=""
-
-if [ "$1" = "-d" ] ; then
-	# make a directory path
-	$MKDIR "$2"
-	exit 0
-fi
-
-if [ "$1" = "-m" ] ; then
-	# set file mode
-	MODE=$2
-	shift 2
-fi
-
-# install file(s) into destination
-if [ $# -ge 2 ] ; then
-
-	# Last cmd line arg is the dest dir
-	for FILE in $@ ; do
-		DEST="$FILE"
-	done
-
-	# Loop over args, moving them to DEST directory
-	I=1
-	for FILE in $@ ; do
-		if [ $I = $# ] ; then
-			# stop, don't want to install $DEST into $DEST
-			exit 0
-		fi
-
-		PWDSAVE=`pwd`
-
-		# determine file's type
-		if [ -h "$FILE" ] ; then
-			#echo $FILE is a symlink
-			# Unfortunately, cp -d isn't universal so we have to
-			# use a work-around.
-
-			# Use ls -l to find the target that the link points to
-			LL=`ls -l "$FILE"`
-			for L in $LL ; do
-				TARGET=$L
-			done
-			#echo $FILE is a symlink pointing to $TARGET
-
-			FILE=`basename "$FILE"`
-			# Go to $DEST and make the link
-			cd "$DEST"        # pushd
-				$RM "$FILE"
-				$SYMLINK "$TARGET" "$FILE"
-			cd "$PWDSAVE"     # popd
-
-		elif [ -f "$FILE" ] ; then
-			#echo "$FILE" is a regular file
-			# Only copy if the files differ
-			if ! cmp -s $FILE $DEST/`basename $FILE`; then
-				$RM "$DEST/`basename $FILE`"
-				cp "$FILE" "$DEST"
-			fi
-			if [ $MODE ] ; then
-				FILE=`basename "$FILE"`
-				chmod $MODE "$DEST/$FILE"
-			fi
-		else
-			echo "Unknown type of argument: " "$FILE"
-			exit 1
-		fi
-
-		I=`expr $I + 1`
-	done
-
-	exit 0
-fi
-
-# If we get here, we didn't find anything to do
-echo "Usage:"
-echo "  install -d dir                      Create named directory"
-echo "  install [-m mode] file [...] dest   Install files in destination"
-

bin/mklib

@@ -34,7 +34,6 @@ MINOR=0
 PATCH=""
 DEPS=""
 LINK=""
-LDFLAGS=""
 CPLUSPLUS=0
 STATIC=0
 DLOPEN=0
@@ -43,7 +42,7 @@ ARCH="auto"
 ARCHOPT=""
 NOPREFIX=0
 EXPORTS=""
-ID=""
+
 
 #
 # Parse arguments
@@ -61,21 +60,17 @@ do
 	    echo '  -minor N      specifies minor version number (default is 0)'
 	    echo '  -patch N      specifies patch version number (default is 0)'
 	    echo '  -lLIBRARY     specifies a dependency on LIBRARY'
-	    echo '  -LDIR         search in DIR for library dependencies at build time'
-	    echo '  -RDIR         search in DIR for library dependencies at run time'
+	    echo '  -LDIR         search in DIR for library dependencies'
 	    echo '  -linker L     explicity specify the linker program to use (eg: gcc, g++)'
 	    echo '                Not observed on all systems at this time.'
-	    echo '  -ldflags OPT  specify any additional linker flags in OPT'
 	    echo '  -cplusplus    link with C++ runtime'
 	    echo '  -static       make a static library (default is dynamic/shared)'
 	    echo '  -dlopen       make a shared library suitable for dynamic loading'
 	    echo '  -install DIR  put resulting library file(s) in DIR'
 	    echo '  -arch ARCH    override using `uname` to determine host system'
 	    echo '  -archopt OPT  specify an extra achitecture-specific option OPT'
-	    echo '  -altopts OPTS alternate options to override all others'
 	    echo "  -noprefix     don't prefix library name with 'lib' nor add any suffix"
 	    echo '  -exports FILE only export the symbols listed in FILE'
-	    echo '  -id NAME      Sets the id of the dylib (Darwin)'
 	    echo '  -h, --help    display this information and exit'
 	    exit 1
 	    ;;
@@ -99,29 +94,12 @@ do
 	    shift 1;
 	    LINK=$1
 	    ;;
-	'-ldflags')
-	    shift 1;
-	    LDFLAGS=$1
-	    ;;
 	-l*)
 	    DEPS="$DEPS $1"
 	    ;;
 	-L*)
 	    DEPS="$DEPS $1"
 	    ;;
-	-R*)
-	    DEPS="$DEPS $1"
-	    ;;
-	-Wl*)
-            DEPS="$DEPS $1"
-            ;;
-	-pthread)
-	    # this is a special case (see bugzilla 10876)
-	    DEPS="$DEPS $1"
-	    ;;
-	'-pthread')
-	    DEPS="$DEPS -pthread"
-	    ;;
 	'-cplusplus')
 	    CPLUSPLUS=1
 	    ;;
@@ -143,10 +121,6 @@ do
 	    shift 1;
 	    ARCHOPT=$1
 	    ;;
-	'-altopts')
-            shift 1;
-            ALTOPTS=$1
-            ;;
 	'-noprefix')
 	    NOPREFIX=1
 	    ;;
@@ -154,10 +128,6 @@ do
 	    shift 1;
 	    EXPORTS=$1
 	    ;;
-	'-id')
-	    shift 1;
-	    ID=$1
-	    ;;
 	-*)
 	    echo "mklib: Unknown option: " $1 ;
 	    exit 1
@@ -176,23 +146,6 @@ if [ ${ARCH} = "auto" ] ; then
 fi
 
 
-if [ $STATIC = 1 ]; then
-    # filter out linker options inside object list
-    NEWOBJECTS=""
-    for OBJ in $OBJECTS ; do
-	case $OBJ in
-	    -Wl,*)
-		echo "mklib: warning: ignoring $OBJ for static library"
-		;;
-	    *)
-		NEWOBJECTS="$NEWOBJECTS $OBJ"
-		;;
-	esac
-    done
-    OBJECTS=$NEWOBJECTS
-fi
-
-
 #
 # Error checking
 #
@@ -218,7 +171,6 @@ if [  ]  ; then
     echo PATCH is $PATCH
     echo DEPS are $DEPS
     echo "EXPORTS in" $EXPORTS
-    echo ID is $ID
     echo "-----------------"
 fi
 
@@ -228,7 +180,7 @@ fi
 #
 case $ARCH in
 
-    'Linux' | 'OpenBSD' | 'DragonFly' | 'GNU' | GNU/*)
+    'Linux' | 'OpenBSD' | 'GNU' | GNU/*)
 	# we assume gcc
 
 	if [ "x$LINK" = "x" ] ; then
@@ -243,13 +195,8 @@ case $ARCH in
 	if [ $NOPREFIX = 1 ] ; then
 	    # No "lib" or ".so" part
 	    echo "mklib: Making" $ARCH "shared library: " ${LIBNAME}
-	    case $ARCH in 'Linux' | 'GNU' | GNU/*)
-		OPTS="-Xlinker -Bsymbolic -shared"
-	    ;;
-	    *)
-		OPTS="-shared"
-	    ;;
-	    esac
+	    #OPTS="-shared -Wl,-soname,${LIBNAME}"  # soname???
+	    OPTS="-shared"
 
 	    # Check if objects are 32-bit and we're running in 64-bit
 	    # environment.  If so, pass -m32 flag to linker.
@@ -259,54 +206,21 @@ case $ARCH in
 		OPTS="-m32 ${OPTS}"
 	    fi
 
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
-
             rm -f ${LIBNAME}
             # make lib
-            ${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
+            ${LINK} ${OPTS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
             # finish up
             FINAL_LIBS="${LIBNAME}"
         elif [ $STATIC = 1 ] ; then
-            LIBNAME="lib${LIBNAME}.a"     # prefix with "lib", suffix with ".a"
-            echo "mklib: Making" $ARCH "static library: " ${LIBNAME}
+	    LIBNAME="lib${LIBNAME}"     # prefix with "lib"
+            echo "mklib: Making" $ARCH "static library: " ${LIBNAME}.a
             LINK="ar"
             OPTS="-ru"
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
-            rm -f ${LIBNAME}
-
-	    # expand any .a objects into constituent .o files.
-	    NEWOBJECTS=""
-	    DELETIA=""
-	    for OBJ in $OBJECTS ; do
-		case $OBJ in
-		    *.a)
-			# extract the .o files from this .a archive
-			FILES=`ar t $OBJ`
-			ar x $OBJ
-			NEWOBJECTS="$NEWOBJECTS $FILES"
-			# keep track of temporary .o files and delete them below
-			DELETIA="$DELETIA $FILES"
-			;;
-		    *)
-			# ordinary .o file
-			NEWOBJECTS="$NEWOBJECTS $OBJ"
-			;;
-		esac
-	    done
-
             # make lib
-            ${LINK} ${OPTS} ${LIBNAME} ${NEWOBJECTS}
-            ranlib ${LIBNAME}
-
-	    # remove temporary extracted .o files
-	    rm -f ${DELETIA}
-
+            ${LINK} ${OPTS} ${LIBNAME}.a ${OBJECTS}
+	    ranlib ${LIBNAME}.a
             # finish up
-            FINAL_LIBS=${LIBNAME}
+            FINAL_LIBS=${LIBNAME}.a
         else
 	    LIBNAME="lib${LIBNAME}"     # prefix with "lib"
 	    case $ARCH in 'Linux' | 'GNU' | GNU/*)
@@ -319,7 +233,7 @@ case $ARCH in
 	    if [ $EXPORTS ] ; then
 		#OPTS="${OPTS} -Xlinker --retain-symbols-file ${EXPORTS}"
 		# Make the 'exptmp' file for --version-script option
-		echo "{" > exptmp
+		echo "VERSION_${MAJOR}.${MINOR} {" > exptmp
 		echo "global:" >> exptmp
 		sed 's/$/;/' ${EXPORTS} >> exptmp
 		echo "local:" >> exptmp
@@ -336,9 +250,6 @@ case $ARCH in
 	    if [ "${ABI32}" -a `uname -m` = "x86_64" ] ; then
 		OPTS="-m32 ${OPTS}"
 	    fi
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
 
 	    if [ x${PATCH} = "x" ] ; then
 		VERSION="${MAJOR}.${MINOR}"
@@ -354,7 +265,7 @@ case $ARCH in
             rm -f ${LIBNAME}.so
 
             # make lib
-            ${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME}.so.${VERSION} ${OBJECTS} ${DEPS}
+            ${LINK} ${OPTS} -o ${LIBNAME}.so.${VERSION} ${OBJECTS} ${DEPS}
             # make usual symlinks
             ln -s ${LIBNAME}.so.${VERSION} ${LIBNAME}.so.${MAJOR}
             ln -s ${LIBNAME}.so.${MAJOR} ${LIBNAME}.so
@@ -372,9 +283,7 @@ case $ARCH in
 	    ar -ruv ${LIBNAME} ${OBJECTS}
 	    FINAL_LIBS=${LIBNAME}
 	else
-	    if [ $NOPREFIX = 0 ] ; then
-		LIBNAME="lib${LIBNAME}.so"
-	    fi
+	    LIBNAME="lib${LIBNAME}.so"
 	    echo "mklib: Making SunOS shared library: " ${LIBNAME}
 
 	    if [ "x$LINK" = "x" ] ; then
@@ -388,7 +297,7 @@ case $ARCH in
 			# use g++
 			LINK="g++"
 		    else
-			echo "mklib: warning: can't find C++ compiler, trying CC."
+			echo "mklib: warning: can't find C++ comiler, trying CC."
 			LINK="CC"
 		    fi
 		else
@@ -414,55 +323,20 @@ case $ARCH in
 		fi
 	    fi
 
-	    # If using Sun C++ compiler, need to tell it not to add runpaths
-	    # that are specific to the build machine
-	    if [ ${LINK} = "CC" ] ; then
-		OPTS="${OPTS} -norunpath"
-	    fi
-
-	    # Solaris linker requires explicitly listing the Standard C & C++
-	    # libraries in the link path when building shared objects
-	    if [ ${LINK} = "CC" ] ; then
-		DEPS="${DEPS} -lCrun"
-	    fi
-	    DEPS="${DEPS} -lc"
-
-	    if [ $EXPORTS ] ; then
-		# Make the 'mapfile.scope' linker mapfile
-		echo "{" > mapfile.scope
-		echo "global:" >> mapfile.scope
-		sed 's/$/;/' ${EXPORTS} >> mapfile.scope
-		echo "local:" >> mapfile.scope
-		echo "    *;" >> mapfile.scope
-		echo "};" >> mapfile.scope
-		OPTS="${OPTS} -Wl,-Mmapfile.scope"
-	    fi
-
 	    # Check if objects are SPARC v9
 	    # file says: ELF 64-bit MSB relocatable SPARCV9 Version 1
 	    set ${OBJECTS}
-	    if [ ${LINK} = "cc" -o ${LINK} = "CC" ] ; then
-		SPARCV9=`file $1 | grep SPARCV9`
-		if [ "${SPARCV9}" ] ; then
-		    OPTS="${OPTS} -xarch=v9"
-		fi
+	    SPARCV9=`file $1 | grep SPARCV9`
+	    if [ "${SPARCV9}" ] ; then
+		OPTS="${OPTS} -xarch=v9"
 	    fi
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
 
 	    # for debug:
 	    #echo "mklib: linker is" ${LINK} ${OPTS}
-	    if [ $NOPREFIX = 1 ] ; then
-		rm -f ${LIBNAME}
-		${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
-		FINAL_LIBS="${LIBNAME}"
-	    else
-		rm -f ${LIBNAME}.${MAJOR} ${LIBNAME}
-		${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME}.${MAJOR} -h ${LIBNAME}.${MAJOR} ${OBJECTS} ${DEPS}
-		ln -s ${LIBNAME}.${MAJOR} ${LIBNAME}
-		FINAL_LIBS="${LIBNAME}.${MAJOR} ${LIBNAME}"
-	    fi
+	    rm -f ${LIBNAME}.${MAJOR} ${LIBNAME}
+	    ${LINK} ${OPTS} -o ${LIBNAME}.${MAJOR} ${OBJECTS} ${DEPS}
+	    ln -s ${LIBNAME}.${MAJOR} ${LIBNAME}
+	    FINAL_LIBS="${LIBNAME}.${MAJOR} ${LIBNAME}"
 	fi
 	;;
 
@@ -482,11 +356,8 @@ case $ARCH in
 	    # No "lib" or ".so" part
 	    echo "mklib: Making FreeBSD shared library: " ${LIBNAME}
 	    OPTS="-shared"
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
 	    rm -f ${LIBNAME}
-	    ${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
+	    ${LINK} ${OPTS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
 	    FINAL_LIBS=${LIBNAME}
         elif [ $STATIC = 1 ] ; then
 	    STLIB="lib${LIBNAME}.a"
@@ -498,12 +369,9 @@ case $ARCH in
 	else
 	    SHLIB="lib${LIBNAME}.so.${MAJOR}"
 	    OPTS="-shared -Wl,-soname,${SHLIB}"
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
 	    echo "mklib: Making FreeBSD shared library: " ${SHLIB}
 	    rm -f ${SHLIB}
-	    ${LINK} ${OPTS} ${LDFLAGS} -o ${SHLIB} ${OBJECTS} ${DEPS}
+	    ${LINK} ${OPTS} -o ${SHLIB} ${OBJECTS} ${DEPS}
 	    ln -sf ${SHLIB} "lib${LIBNAME}.so"
 	    FINAL_LIBS="${SHLIB} lib${LIBNAME}.so"
 	fi
@@ -554,10 +422,6 @@ case $ARCH in
 		exit 1
 	    fi
 
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
-
 	    if [ $CPLUSPLUS = 1 ] ; then
 		LINK="CC"
 	    else
@@ -565,7 +429,7 @@ case $ARCH in
 	    fi
 
 	    echo "mklib: Making IRIX " ${ABI} " shared library: " ${LIBNAME}
-	    ${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
+	    ${LINK} ${OPTS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
 	    FINAL_LIBS=${LIBNAME}
 	fi
 	;;
@@ -638,16 +502,12 @@ case $ARCH in
 		}
 	    }' | sort -u >> ${EXPFILE}
 
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
-
             # On AIX a shared library is linked differently when
             # you want to dlopen the file
 	    if [ $DLOPEN = "1" ] ; then
-		cc -G ${OPTS} ${LDFLAGS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
+		cc -G ${OPTS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
 	    else
-		cc ${OPTS} ${LDFLAGS} -o ${OFILE} ${OBJECTS} ${DEPS}
+		cc ${OPTS} -o ${OFILE} ${OBJECTS} ${DEPS}
 		ar ${X64} -r ${LIBNAME} ${OFILE}
 	    fi
 
@@ -693,9 +553,6 @@ case $ARCH in
             echo "mklib: Making Darwin static library: " ${LIBNAME}
             LINK="ar"
             OPTS="-ruvs"
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
             ${LINK} ${OPTS} ${LIBNAME} ${OBJECTS}
             FINAL_LIBS=${LIBNAME}
         else
@@ -704,34 +561,22 @@ case $ARCH in
                 LIBSUFFIX="bundle"
                 OPTS="${ARCHOPT} -bundle -multiply_defined suppress"
             else
-                LIBSUFFIX="dylib"
-                if [ -z "$ID" ] ; then
-                    ID="lib${LIBNAME}.${MAJOR}.${LIBSUFFIX}"
-                fi
-                OPTS="${ARCHOPT} -dynamiclib -multiply_defined suppress -current_version ${MAJOR}.${MINOR}.0 -compatibility_version ${MAJOR}.${MINOR}.0 -install_name ${ID}"
+		LIBSUFFIX="dylib"
+                OPTS="${ARCHOPT} -dynamiclib -multiply_defined suppress -current_version ${MAJOR}.${MINOR}.0 -compatibility_version ${MAJOR}.${MINOR}.0 -install_name lib${LIBNAME}.${MAJOR}.${LIBSUFFIX}"
             fi
-
-            if [ ${EXPORTS} ] ; then
-                if [ -f ${EXPORTS}".darwin" ] ; then
-                    EXPORTS=$EXPORTS".darwin"
-                fi
-                OPTS="${OPTS} -exported_symbols_list ${EXPORTS}"
-            fi
-
-            LINKNAME="lib${LIBNAME}.${MAJOR}.${LIBSUFFIX}"
-            LINKNAME2="lib${LIBNAME}.${LIBSUFFIX}"
-            LIBNAME="lib${LIBNAME}.${MAJOR}.${MINOR}.${LIBSUFFIX}"
+            LINKNAME="lib${LIBNAME}.${LIBSUFFIX}"
+            LIBNAME="lib${LIBNAME}.${MAJOR}.${LIBSUFFIX}"
 
 	    # examine first object to determine ABI
     	    set ${OBJECTS}
-            ABIS=`lipo -info $1 | sed s/.*://`
-            for ABI in $ABIS; do
-                OPTS="${OPTS} -arch ${ABI}"
-            done
-
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
+	    ABI_PPC=`file $1 | grep 'object ppc'`
+	    ABI_I386=`file $1 | grep 'object i386'`
+	    if [ "${ABI_PPC}" ] ; then
+		OPTS="${OPTS} -arch ppc"
+	    fi
+	    if [ "${ABI_I386}" ] ; then
+		OPTS="${OPTS} -arch i386"
+	    fi
 
 	    # XXX can we always add -isysroot /Developer/SDKs/MacOSX10.4u.sdk
 	    # to OPTS here?
@@ -744,11 +589,9 @@ case $ARCH in
 	    fi
 
             echo "mklib: Making Darwin shared library: " ${LIBNAME}
-
-            ${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
+            ${LINK} ${OPTS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
             ln -s ${LIBNAME} ${LINKNAME}
-            ln -s ${LIBNAME} ${LINKNAME2}
-            FINAL_LIBS="${LIBNAME} ${LINKNAME} ${LINKNAME2}"
+            FINAL_LIBS="${LIBNAME} ${LINKNAME}"
         fi
         ;;
 
@@ -800,9 +643,6 @@ case $ARCH in
             echo "mklib: Making Intel ICC static library: " ${LIBNAME}.a
             LINK="ar"
             OPTS="-ruv"
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
             # make lib
             ${LINK} ${OPTS} ${LIBNAME}.a ${OBJECTS}
             # finish up
@@ -813,9 +653,6 @@ case $ARCH in
             else
                  OPTS="-shared"
             fi
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
             VERSION="${MAJOR}.${MINOR}.${PATCH}"
             echo "mklib: Making Intel ICC shared library: " ${LIBNAME}.so.${VERSION}
 
@@ -829,7 +666,7 @@ case $ARCH in
             rm -f ${LIBNAME}.so.${MAJOR}
             rm -f ${LIBNAME}.so
             # make lib
-            ${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME}.so.${VERSION} ${OBJECTS} ${DEPS}
+            ${LINK} ${OPTS} -o ${LIBNAME}.so.${VERSION} ${OBJECTS} ${DEPS}
             # make usual symlinks
             ln -s ${LIBNAME}.so.${VERSION} ${LIBNAME}.so.${MAJOR}
             ln -s ${LIBNAME}.so.${MAJOR} ${LIBNAME}.so
@@ -873,17 +710,6 @@ case $ARCH in
 
      CYGWIN*)
 	# GCC-based environment
-	if [ $NOPREFIX = 1 ] ; then
-	    # No "lib" or ".so" part
-	    echo "mklib: Making CYGWIN shared library: " ${LIBNAME}
-	    OPTS="-shared -Wl,--enable-auto-image-base"
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
-	    rm -f ${LIBNAME}
-	    ${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
-	    FINAL_LIBS=${LIBNAME}
-        else
 	CYGNAME="cyg${LIBNAME}"     # prefix with "cyg"
 	LIBNAME="lib${LIBNAME}"     # prefix with "lib"
 
@@ -891,20 +717,14 @@ case $ARCH in
             echo "mklib: Making" $ARCH "static library: " ${LIBNAME}.a
             LINK="ar"
             OPTS="-ru"
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
             # make lib
             ${LINK} ${OPTS} ${LIBNAME}.a ${OBJECTS}
 	    ranlib ${LIBNAME}.a
             # finish up
             FINAL_LIBS=${LIBNAME}.a
         else
-	    OPTS="-shared -Wl,--enable-auto-image-base -Wl,-export-all -Wl,--out-implib=${LIBNAME}-${MAJOR}.dll.a"
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
-            echo "mklib: Making" $ARCH "shared library: " ${CYGNAME}-${MAJOR}.dll
+	    OPTS="-shared -Wl,-export-all -Wl,--out-implib=${LIBNAME}-${MAJOR}.dll.a"
+            echo "mklib: Making" $ARCH "shared library: " ${LIBNAME}-${MAJOR}.dll
 
             if [ $CPLUSPLUS = 1 ] ; then
                 LINK="g++"
@@ -913,13 +733,12 @@ case $ARCH in
             fi
 
             # rm any old libs
-            rm -f ${CYGNAME}-${MAJOR}.dll
-            rm -f ${LIBNAME}-${MAJOR}.dll.a
+            rm -f ${LIBNAME}-${MAJOR}.dll
             rm -f ${LIBNAME}.dll.a
             rm -f ${LIBNAME}.a
 
             # make lib
-            ${LINK} ${OPTS} ${LDFLAGS} -o ${CYGNAME}-${MAJOR}.dll ${OBJECTS} ${DEPS}
+            ${LINK} ${OPTS} -o ${CYGNAME}-${MAJOR}.dll ${OBJECTS} ${DEPS}
             # make usual symlinks
             ln -s ${LIBNAME}-${MAJOR}.dll.a ${LIBNAME}.dll.a
             # finish up
@@ -927,7 +746,6 @@ case $ARCH in
 	    # special case for installing in bin
             FINAL_BINS="${CYGNAME}-${MAJOR}.dll"
         fi
-        fi
 	;;
 
     'example')
@@ -959,6 +777,5 @@ esac
 #
 if [ ${INSTALLDIR} != "." ] ; then
     echo "mklib: Installing" ${FINAL_LIBS} "in" ${INSTALLDIR}
-    test -d ${INSTALLDIR} || mkdir -p ${INSTALLDIR}
     mv ${FINAL_LIBS} ${INSTALLDIR}/
 fi

bin/raw2png.py

@@ -1,366 +0,0 @@
-#!/usr/bin/env python
-##########################################################################
-# 
-# Copyright 2008 Tungsten Graphics, Inc., Cedar Park, Texas.
-# All Rights Reserved.
-# 
-# Permission is hereby granted, free of charge, to any person obtaining a
-# copy of this software and associated documentation files (the
-# "Software"), to deal in the Software without restriction, including
-# without limitation the rights to use, copy, modify, merge, publish,
-# distribute, sub license, and/or sell copies of the Software, and to
-# permit persons to whom the Software is furnished to do so, subject to
-# the following conditions:
-# 
-# The above copyright notice and this permission notice (including the
-# next paragraph) shall be included in all copies or substantial portions
-# of the Software.
-# 
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
-# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
-# IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
-# ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
-# TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
-# SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-# 
-##########################################################################
-
-
-import os.path
-import sys
-import struct
-import Image # http://www.pythonware.com/products/pil/
-
-PIPE_FORMAT_LAYOUT_RGBAZS   = 0
-PIPE_FORMAT_LAYOUT_YCBCR    = 1
-PIPE_FORMAT_LAYOUT_DXT      = 2
-PIPE_FORMAT_LAYOUT_MIXED    = 3
-
-PIPE_FORMAT_COMP_R    = 0
-PIPE_FORMAT_COMP_G    = 1
-PIPE_FORMAT_COMP_B    = 2
-PIPE_FORMAT_COMP_A    = 3
-PIPE_FORMAT_COMP_0    = 4
-PIPE_FORMAT_COMP_1    = 5
-PIPE_FORMAT_COMP_Z    = 6
-PIPE_FORMAT_COMP_S    = 7
-
-PIPE_FORMAT_TYPE_UNKNOWN = 0
-PIPE_FORMAT_TYPE_FLOAT   = 1
-PIPE_FORMAT_TYPE_UNORM   = 2
-PIPE_FORMAT_TYPE_SNORM   = 3
-PIPE_FORMAT_TYPE_USCALED = 4
-PIPE_FORMAT_TYPE_SSCALED = 5
-PIPE_FORMAT_TYPE_SRGB    = 6
-PIPE_FORMAT_TYPE_FIXED   = 7
-
-def _PIPE_FORMAT_RGBAZS( SWZ, SIZEX, SIZEY, SIZEZ, SIZEW, EXP2, TYPE ):
-   return ((PIPE_FORMAT_LAYOUT_RGBAZS << 0) |\
-   ((SWZ) << 2) |\
-   ((SIZEX) << 14) |\
-   ((SIZEY) << 17) |\
-   ((SIZEZ) << 20) |\
-   ((SIZEW) << 23) |\
-   ((EXP2) << 26) |\
-   ((TYPE) << 29) )
-
-def _PIPE_FORMAT_SWZ( SWZX, SWZY, SWZZ, SWZW ):
-	return (((SWZX) << 0) | ((SWZY) << 3) | ((SWZZ) << 6) | ((SWZW) << 9))
-
-def _PIPE_FORMAT_RGBAZS_1( SWZ, SIZEX, SIZEY, SIZEZ, SIZEW, TYPE ):
-	return _PIPE_FORMAT_RGBAZS( SWZ, SIZEX, SIZEY, SIZEZ, SIZEW, 0, TYPE )
-
-def _PIPE_FORMAT_RGBAZS_2( SWZ, SIZEX, SIZEY, SIZEZ, SIZEW, TYPE ):
-    _PIPE_FORMAT_RGBAZS( SWZ, SIZEX, SIZEY, SIZEZ, SIZEW, 1, TYPE )
-
-def _PIPE_FORMAT_RGBAZS_8( SWZ, SIZEX, SIZEY, SIZEZ, SIZEW, TYPE ):
-	return _PIPE_FORMAT_RGBAZS( SWZ, SIZEX, SIZEY, SIZEZ, SIZEW, 3, TYPE )
-
-def _PIPE_FORMAT_RGBAZS_64( SWZ, SIZEX, SIZEY, SIZEZ, SIZEW, TYPE ):
-	return _PIPE_FORMAT_RGBAZS( SWZ, SIZEX, SIZEY, SIZEZ, SIZEW, 6, TYPE )
-
-def _PIPE_FORMAT_MIXED( SWZ, SIZEX, SIZEY, SIZEZ, SIZEW, SIGNX, SIGNY, SIGNZ, SIGNW, NORMALIZED, SCALE8 ):
-    return ((PIPE_FORMAT_LAYOUT_MIXED << 0) |\
-    ((SWZ) << 2) |\
-    ((SIZEX) << 14) |\
-    ((SIZEY) << 17) |\
-    ((SIZEZ) << 20) |\
-    ((SIZEW) << 23) |\
-    ((SIGNX) << 26) |\
-    ((SIGNY) << 27) |\
-    ((SIGNZ) << 28) |\
-    ((SIGNW) << 29) |\
-    ((NORMALIZED) << 30) |\
-    ((SCALE8) << 31) )
-
-
-_PIPE_FORMAT_R001 = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_1 )
-_PIPE_FORMAT_RG01 = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_G, PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_1 )
-_PIPE_FORMAT_RGB1 = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_G, PIPE_FORMAT_COMP_B, PIPE_FORMAT_COMP_1 )
-_PIPE_FORMAT_RGBA = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_G, PIPE_FORMAT_COMP_B, PIPE_FORMAT_COMP_A )
-_PIPE_FORMAT_ARGB = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_A, PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_G, PIPE_FORMAT_COMP_B )
-_PIPE_FORMAT_ABGR = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_A, PIPE_FORMAT_COMP_B, PIPE_FORMAT_COMP_G, PIPE_FORMAT_COMP_R )
-_PIPE_FORMAT_BGRA = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_B, PIPE_FORMAT_COMP_G, PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_A )
-_PIPE_FORMAT_1RGB = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_1, PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_G, PIPE_FORMAT_COMP_B )
-_PIPE_FORMAT_1BGR = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_1, PIPE_FORMAT_COMP_B, PIPE_FORMAT_COMP_G, PIPE_FORMAT_COMP_R )
-_PIPE_FORMAT_BGR1 = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_B, PIPE_FORMAT_COMP_G, PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_1 )
-_PIPE_FORMAT_0000 = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_0 )
-_PIPE_FORMAT_000R = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_R )
-_PIPE_FORMAT_RRR1 = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_1 )
-_PIPE_FORMAT_RRRR = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_R )
-_PIPE_FORMAT_RRRG = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_G )
-_PIPE_FORMAT_Z000 = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_Z, PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_0 )
-_PIPE_FORMAT_0Z00 = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_Z, PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_0 )
-_PIPE_FORMAT_SZ00 = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_S, PIPE_FORMAT_COMP_Z, PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_0 )
-_PIPE_FORMAT_ZS00 = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_Z, PIPE_FORMAT_COMP_S, PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_0 )
-_PIPE_FORMAT_S000 = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_S, PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_0 )
-
-def _PIPE_FORMAT_YCBCR( REV ):
-   return ((PIPE_FORMAT_LAYOUT_YCBCR << 0) |\
-   ((REV) << 2) )
-
-def _PIPE_FORMAT_DXT( LEVEL, RSIZE, GSIZE, BSIZE, ASIZE ):
-    return ((PIPE_FORMAT_LAYOUT_DXT << 0) | \
-    ((LEVEL) << 2) | \
-    ((RSIZE) << 5) | \
-    ((GSIZE) << 8) | \
-    ((BSIZE) << 11) | \
-    ((ASIZE) << 14) )
-
-PIPE_FORMAT_NONE                  = _PIPE_FORMAT_RGBAZS_1 ( _PIPE_FORMAT_0000, 0, 0, 0, 0, PIPE_FORMAT_TYPE_UNKNOWN )
-PIPE_FORMAT_A8R8G8B8_UNORM        = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_ARGB, 1, 1, 1, 1, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_X8R8G8B8_UNORM        = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_1RGB, 1, 1, 1, 1, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_B8G8R8A8_UNORM        = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_BGRA, 1, 1, 1, 1, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_B8G8R8X8_UNORM        = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_BGR1, 1, 1, 1, 1, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_A1R5G5B5_UNORM        = _PIPE_FORMAT_RGBAZS_1 ( _PIPE_FORMAT_ARGB, 1, 5, 5, 5, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_A4R4G4B4_UNORM        = _PIPE_FORMAT_RGBAZS_1 ( _PIPE_FORMAT_ARGB, 4, 4, 4, 4, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_R5G6B5_UNORM          = _PIPE_FORMAT_RGBAZS_1 ( _PIPE_FORMAT_RGB1, 5, 6, 5, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_A2B10G10R10_UNORM     = _PIPE_FORMAT_RGBAZS_2 ( _PIPE_FORMAT_ABGR, 1, 5, 5, 5, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_L8_UNORM              = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RRR1, 1, 1, 1, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_A8_UNORM              = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_000R, 0, 0, 0, 1, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_I8_UNORM              = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RRRR, 1, 1, 1, 1, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_A8L8_UNORM            = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RRRG, 1, 1, 1, 1, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_L16_UNORM             = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RRR1, 2, 2, 2, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_YCBCR                 = _PIPE_FORMAT_YCBCR( 0 )
-PIPE_FORMAT_YCBCR_REV             = _PIPE_FORMAT_YCBCR( 1 )
-PIPE_FORMAT_Z16_UNORM             = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_Z000, 2, 0, 0, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_Z32_UNORM             = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_Z000, 4, 0, 0, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_Z32_FLOAT             = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_Z000, 4, 0, 0, 0, PIPE_FORMAT_TYPE_FLOAT )
-PIPE_FORMAT_S8Z24_UNORM           = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_SZ00, 1, 3, 0, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_Z24S8_UNORM           = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_ZS00, 3, 1, 0, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_X8Z24_UNORM           = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_0Z00, 1, 3, 0, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_Z24X8_UNORM           = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_Z000, 3, 1, 0, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_S8_UNORM              = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_S000, 1, 0, 0, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_R64_FLOAT             = _PIPE_FORMAT_RGBAZS_64( _PIPE_FORMAT_R001, 1, 0, 0, 0, PIPE_FORMAT_TYPE_FLOAT )
-PIPE_FORMAT_R64G64_FLOAT          = _PIPE_FORMAT_RGBAZS_64( _PIPE_FORMAT_RG01, 1, 1, 0, 0, PIPE_FORMAT_TYPE_FLOAT )
-PIPE_FORMAT_R64G64B64_FLOAT       = _PIPE_FORMAT_RGBAZS_64( _PIPE_FORMAT_RGB1, 1, 1, 1, 0, PIPE_FORMAT_TYPE_FLOAT )
-PIPE_FORMAT_R64G64B64A64_FLOAT    = _PIPE_FORMAT_RGBAZS_64( _PIPE_FORMAT_RGBA, 1, 1, 1, 1, PIPE_FORMAT_TYPE_FLOAT )
-PIPE_FORMAT_R32_FLOAT             = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_R001, 4, 0, 0, 0, PIPE_FORMAT_TYPE_FLOAT )
-PIPE_FORMAT_R32G32_FLOAT          = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RG01, 4, 4, 0, 0, PIPE_FORMAT_TYPE_FLOAT )
-PIPE_FORMAT_R32G32B32_FLOAT       = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 4, 4, 4, 0, PIPE_FORMAT_TYPE_FLOAT )
-PIPE_FORMAT_R32G32B32A32_FLOAT    = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGBA, 4, 4, 4, 4, PIPE_FORMAT_TYPE_FLOAT )
-PIPE_FORMAT_R32_UNORM             = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_R001, 4, 0, 0, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_R32G32_UNORM          = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RG01, 4, 4, 0, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_R32G32B32_UNORM       = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 4, 4, 4, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_R32G32B32A32_UNORM    = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGBA, 4, 4, 4, 4, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_R32_USCALED           = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_R001, 4, 0, 0, 0, PIPE_FORMAT_TYPE_USCALED )
-PIPE_FORMAT_R32G32_USCALED        = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RG01, 4, 4, 0, 0, PIPE_FORMAT_TYPE_USCALED )
-PIPE_FORMAT_R32G32B32_USCALED     = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 4, 4, 4, 0, PIPE_FORMAT_TYPE_USCALED )
-PIPE_FORMAT_R32G32B32A32_USCALED  = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGBA, 4, 4, 4, 4, PIPE_FORMAT_TYPE_USCALED )
-PIPE_FORMAT_R32_SNORM             = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_R001, 4, 0, 0, 0, PIPE_FORMAT_TYPE_SNORM )
-PIPE_FORMAT_R32G32_SNORM          = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RG01, 4, 4, 0, 0, PIPE_FORMAT_TYPE_SNORM )
-PIPE_FORMAT_R32G32B32_SNORM       = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 4, 4, 4, 0, PIPE_FORMAT_TYPE_SNORM )
-PIPE_FORMAT_R32G32B32A32_SNORM    = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGBA, 4, 4, 4, 4, PIPE_FORMAT_TYPE_SNORM )
-PIPE_FORMAT_R32_SSCALED           = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_R001, 4, 0, 0, 0, PIPE_FORMAT_TYPE_SSCALED )
-PIPE_FORMAT_R32G32_SSCALED        = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RG01, 4, 4, 0, 0, PIPE_FORMAT_TYPE_SSCALED )
-PIPE_FORMAT_R32G32B32_SSCALED     = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 4, 4, 4, 0, PIPE_FORMAT_TYPE_SSCALED )
-PIPE_FORMAT_R32G32B32A32_SSCALED  = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGBA, 4, 4, 4, 4, PIPE_FORMAT_TYPE_SSCALED )
-PIPE_FORMAT_R16_UNORM             = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_R001, 2, 0, 0, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_R16G16_UNORM          = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RG01, 2, 2, 0, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_R16G16B16_UNORM       = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 2, 2, 2, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_R16G16B16A16_UNORM    = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGBA, 2, 2, 2, 2, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_R16_USCALED           = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_R001, 2, 0, 0, 0, PIPE_FORMAT_TYPE_USCALED )
-PIPE_FORMAT_R16G16_USCALED        = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RG01, 2, 2, 0, 0, PIPE_FORMAT_TYPE_USCALED )
-PIPE_FORMAT_R16G16B16_USCALED     = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 2, 2, 2, 0, PIPE_FORMAT_TYPE_USCALED )
-PIPE_FORMAT_R16G16B16A16_USCALED  = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGBA, 2, 2, 2, 2, PIPE_FORMAT_TYPE_USCALED )
-PIPE_FORMAT_R16_SNORM             = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_R001, 2, 0, 0, 0, PIPE_FORMAT_TYPE_SNORM )
-PIPE_FORMAT_R16G16_SNORM          = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RG01, 2, 2, 0, 0, PIPE_FORMAT_TYPE_SNORM )
-PIPE_FORMAT_R16G16B16_SNORM       = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 2, 2, 2, 0, PIPE_FORMAT_TYPE_SNORM )
-PIPE_FORMAT_R16G16B16A16_SNORM    = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGBA, 2, 2, 2, 2, PIPE_FORMAT_TYPE_SNORM )
-PIPE_FORMAT_R16_SSCALED           = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_R001, 2, 0, 0, 0, PIPE_FORMAT_TYPE_SSCALED )
-PIPE_FORMAT_R16G16_SSCALED        = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RG01, 2, 2, 0, 0, PIPE_FORMAT_TYPE_SSCALED )
-PIPE_FORMAT_R16G16B16_SSCALED     = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 2, 2, 2, 0, PIPE_FORMAT_TYPE_SSCALED )
-PIPE_FORMAT_R16G16B16A16_SSCALED  = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGBA, 2, 2, 2, 2, PIPE_FORMAT_TYPE_SSCALED )
-PIPE_FORMAT_R8_UNORM              = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_R001, 1, 0, 0, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_R8G8_UNORM            = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RG01, 1, 1, 0, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_R8G8B8_UNORM          = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 1, 1, 1, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_R8G8B8A8_UNORM        = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGBA, 1, 1, 1, 1, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_R8G8B8X8_UNORM        = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 1, 1, 1, 1, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_R8_USCALED            = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_R001, 1, 0, 0, 0, PIPE_FORMAT_TYPE_USCALED )
-PIPE_FORMAT_R8G8_USCALED          = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RG01, 1, 1, 0, 0, PIPE_FORMAT_TYPE_USCALED )
-PIPE_FORMAT_R8G8B8_USCALED        = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 1, 1, 1, 0, PIPE_FORMAT_TYPE_USCALED )
-PIPE_FORMAT_R8G8B8A8_USCALED      = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGBA, 1, 1, 1, 1, PIPE_FORMAT_TYPE_USCALED )
-PIPE_FORMAT_R8G8B8X8_USCALED      = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 1, 1, 1, 1, PIPE_FORMAT_TYPE_USCALED )
-PIPE_FORMAT_R8_SNORM              = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_R001, 1, 0, 0, 0, PIPE_FORMAT_TYPE_SNORM )
-PIPE_FORMAT_R8G8_SNORM            = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RG01, 1, 1, 0, 0, PIPE_FORMAT_TYPE_SNORM )
-PIPE_FORMAT_R8G8B8_SNORM          = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 1, 1, 1, 0, PIPE_FORMAT_TYPE_SNORM )
-PIPE_FORMAT_R8G8B8A8_SNORM        = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGBA, 1, 1, 1, 1, PIPE_FORMAT_TYPE_SNORM )
-PIPE_FORMAT_R8G8B8X8_SNORM        = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 1, 1, 1, 1, PIPE_FORMAT_TYPE_SNORM )
-PIPE_FORMAT_B6G5R5_SNORM          = _PIPE_FORMAT_RGBAZS_1 ( _PIPE_FORMAT_BGR1, 6, 5, 5, 0, PIPE_FORMAT_TYPE_SNORM )
-PIPE_FORMAT_A8B8G8R8_SNORM        = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_BGRA, 1, 1, 1, 1, PIPE_FORMAT_TYPE_SNORM )
-PIPE_FORMAT_X8B8G8R8_SNORM        = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 1, 1, 1, 1, PIPE_FORMAT_TYPE_SNORM )
-PIPE_FORMAT_R8_SSCALED            = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_R001, 1, 0, 0, 0, PIPE_FORMAT_TYPE_SSCALED )
-PIPE_FORMAT_R8G8_SSCALED          = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RG01, 1, 1, 0, 0, PIPE_FORMAT_TYPE_SSCALED )
-PIPE_FORMAT_R8G8B8_SSCALED        = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 1, 1, 1, 0, PIPE_FORMAT_TYPE_SSCALED )
-PIPE_FORMAT_R8G8B8A8_SSCALED      = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGBA, 1, 1, 1, 1, PIPE_FORMAT_TYPE_SSCALED )
-PIPE_FORMAT_R8G8B8X8_SSCALED      = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 1, 1, 1, 1, PIPE_FORMAT_TYPE_SSCALED )
-PIPE_FORMAT_R32_FIXED             = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_R001, 4, 0, 0, 0, PIPE_FORMAT_TYPE_FIXED )
-PIPE_FORMAT_R32G32_FIXED          = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RG01, 4, 4, 0, 0, PIPE_FORMAT_TYPE_FIXED )
-PIPE_FORMAT_R32G32B32_FIXED       = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 4, 4, 4, 0, PIPE_FORMAT_TYPE_FIXED )
-PIPE_FORMAT_R32G32B32A32_FIXED    = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGBA, 4, 4, 4, 4, PIPE_FORMAT_TYPE_FIXED )
-PIPE_FORMAT_L8_SRGB               = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RRR1, 1, 1, 1, 0, PIPE_FORMAT_TYPE_SRGB )
-PIPE_FORMAT_A8_L8_SRGB            = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RRRG, 1, 1, 1, 1, PIPE_FORMAT_TYPE_SRGB )
-PIPE_FORMAT_R8G8B8_SRGB           = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 1, 1, 1, 0, PIPE_FORMAT_TYPE_SRGB )
-PIPE_FORMAT_R8G8B8A8_SRGB         = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGBA, 1, 1, 1, 1, PIPE_FORMAT_TYPE_SRGB )
-PIPE_FORMAT_R8G8B8X8_SRGB         = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 1, 1, 1, 1, PIPE_FORMAT_TYPE_SRGB )
-PIPE_FORMAT_X8UB8UG8SR8S_NORM     = _PIPE_FORMAT_MIXED( _PIPE_FORMAT_1BGR, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1 )
-PIPE_FORMAT_B6UG5SR5S_NORM        = _PIPE_FORMAT_MIXED( _PIPE_FORMAT_BGR1, 6, 5, 5, 0, 0, 1, 1, 0, 1, 0 )
-PIPE_FORMAT_DXT1_RGB              = _PIPE_FORMAT_DXT( 1, 8, 8, 8, 0 )
-PIPE_FORMAT_DXT1_RGBA             = _PIPE_FORMAT_DXT( 1, 8, 8, 8, 8 )
-PIPE_FORMAT_DXT3_RGBA             = _PIPE_FORMAT_DXT( 3, 8, 8, 8, 8 )
-PIPE_FORMAT_DXT5_RGBA             = _PIPE_FORMAT_DXT( 5, 8, 8, 8, 8 )
-
-
-formats = {}
-for name, value in globals().items():
-    if name.startswith("PIPE_FORMAT_") and isinstance(value, int):
-        formats[value] = name
-
-
-def clip(g):
-	return min(max(g, 0), 255)
-
-
-def yuv2rgb(y, u, v):
-	C = y - 16
-	D = u - 128
-	E = v - 128
-
-	r = clip(( 298 * C           + 409 * E + 128) >> 8)
-	g = clip(( 298 * C - 100 * D - 208 * E + 128) >> 8)
-	b = clip(( 298 * C + 516 * D           + 128) >> 8)
-	
-	return r, g, b
-
-	
-def translate_r5g6b5(data):
-	value, = struct.unpack_from("H", data)
-	r = ((value >> 11) & 0x1f)*0xff/0x1f
-	g = ((value >>  5) & 0x3f)*0xff/0x3f
-	b = ((value >>  0) & 0x1f)*0xff/0x1f
-	a = 255
-	return [[(r, g, b, a)]]
-
-def translate_a8r8g8b8(data):
-    b, g, r, a = struct.unpack_from("BBBB", data)
-    return [[(r, g, b, a)]]
-
-
-def translate_x8r8g8b8(data):
-    b, g, r, x = struct.unpack_from("BBBB", data)
-    a = 255
-    return [[(r, g, b, a)]]
-
-def translate_r8g8b8a8(data):
-	r, g, b, a = struct.unpack_from("BBBB", data)
-	return [[(r, g, b, a)]]
-
-def translate_ycbcr(data):
-	y1, u, y2, v = struct.unpack_from("BBBB", data)
-	r1, g1, b1 = yuv2rgb(y1, u, v)
-	r2, g2, b2 = yuv2rgb(y1, u, v)
-	return [[(r1, g1, b1, 255), (r2, g2, b2, 255)]]
-
-def translate_ycbcr_rev(data):
-    v, y2, u, y1 = struct.unpack_from("BBBB", data)
-    r1, g1, b1 = yuv2rgb(y1, u, v)
-    r2, g2, b2 = yuv2rgb(y1, u, v)
-    return [[(r1, g1, b1, 255), (r2, g2, b2, 255)]]
-
-def translate_x8z24(data):
-    value, = struct.unpack_from("I", data)
-    r = g = b = (value & 0xffffff)*0xff/0xffffff
-    a = 255
-    return [[(r, g, b, a)]]
-
-def translate_s8z24(data):
-    value, = struct.unpack_from("I", data)
-    r = (value & 0xffffff)*0xff/0xffffff
-    g = value >> 24
-    b = 0
-    a = 255
-    return [[(r, g, b, a)]]
-
-
-translate = {
-	PIPE_FORMAT_A8R8G8B8_UNORM: (4, 1, 1, translate_a8r8g8b8),
-	PIPE_FORMAT_X8R8G8B8_UNORM: (4, 1, 1, translate_x8r8g8b8),
-	PIPE_FORMAT_B8G8R8A8_UNORM: (4, 1, 1, translate_r8g8b8a8),
-	PIPE_FORMAT_B8G8R8X8_UNORM: (4, 1, 1, translate_r8g8b8a8),
-	PIPE_FORMAT_A8B8G8R8_SNORM: (4, 1, 1, translate_r8g8b8a8),
-	PIPE_FORMAT_R5G6B5_UNORM: (2, 1, 1, translate_r5g6b5),
-	PIPE_FORMAT_YCBCR: (4, 2, 1, translate_ycbcr),
-	PIPE_FORMAT_YCBCR_REV: (4, 2, 1, translate_ycbcr_rev),
-    PIPE_FORMAT_S8Z24_UNORM: (4, 1, 1, translate_s8z24),
-    PIPE_FORMAT_X8Z24_UNORM: (4, 1, 1, translate_x8z24),
-}
-
-def read_header(infile):
-	header_fmt = "IIII"
-	header = infile.read(struct.calcsize(header_fmt))
-	return struct.unpack_from(header_fmt, header)
-
-def process(infilename, outfilename):
-	sys.stderr.write("%s -> %s\n" % (infilename, outfilename))
-	infile = open(infilename, "rb")
-	format, cpp, width, height = read_header(infile)
-	sys.stderr.write("  %ux%ux%ubpp %s\n" % (width, height, cpp*8, formats[format]))
-	outimage = Image.new(
-	mode='RGB',
-	size=(width, height),
-	color=(0,0,0))
-	outpixels = outimage.load()
-	try:
-		bsize, bwidth, bheight, translate_func = translate[format]
-	except KeyError:
-		sys.stderr.write('error: unsupported format %s\n' % formats[format])
-		return
-	for y in range(0, height, bheight):
-		for x in range(0, width, bwidth):
-			indata = infile.read(bsize)
-			outdata = translate_func(indata)
-			for j in range(bheight):
-				for i in range(bwidth):
-					r, g, b, a = outdata[j][i]
-					outpixels[x+i, y+j] = r, g, b
-	outimage.save(outfilename, "PNG")
-
-
-def main():
-	if sys.platform == 'win32':
-		# wildcard expansion
-		from glob import glob
-		args = []
-		for arg in sys.argv[1:]:
-			args.extend(glob(arg))
-	else:
-		args = sys.argv[1:]
-	for infilename in args:
-		root, ext = os.path.splitext(infilename)
-		outfilename = root + ".png"
-		process(infilename, outfilename)
-
-
-if __name__ == '__main__':
-	main()

bin/version.mk

@@ -1,17 +0,0 @@
-#!/usr/bin/make -sf
-# Print the various Mesa version fields. This is mostly used to add the
-# version to configure.
-
-# This reflects that this script is usually called from the toplevel
-TOP = .
-
-include $(TOP)/configs/default
-
-version:
-	@echo $(MESA_VERSION)
-major:
-	@echo $(MESA_MAJOR)
-minor:
-	@echo $(MESA_MINOR)
-tiny:
-	@echo $(MESA_TINY)

common.py

@@ -1,67 +0,0 @@
-#######################################################################
-# Common SCons code
-
-import os
-import os.path
-import sys
-import platform as _platform
-
-
-#######################################################################
-# Defaults
-
-_platform_map = {
-	'linux2': 'linux',
-	'win32': 'winddk',
-}
-
-default_platform = sys.platform
-default_platform = _platform_map.get(default_platform, default_platform)
-
-_machine_map = {
-	'x86': 'x86',
-	'i386': 'x86',
-	'i486': 'x86',
-	'i586': 'x86',
-	'i686': 'x86',
-	'ppc' : 'ppc',
-	'x86_64': 'x86_64',
-}
-if 'PROCESSOR_ARCHITECTURE' in os.environ:
-	default_machine = os.environ['PROCESSOR_ARCHITECTURE']
-else:
-	default_machine = _platform.machine()
-default_machine = _machine_map.get(default_machine, 'generic')
-
-if default_platform in ('linux', 'freebsd'):
-	default_dri = 'yes'
-elif default_platform in ('winddk', 'windows', 'wince', 'darwin'):
-	default_dri = 'no'
-else:
-	default_dri = 'no'
-
-
-#######################################################################
-# Common options
-
-def AddOptions(opts):
-	try:
-		from SCons.Variables.BoolVariable import BoolVariable as BoolOption
-	except ImportError:
-		from SCons.Options.BoolOption import BoolOption
-	try:
-		from SCons.Variables.EnumVariable import EnumVariable as EnumOption
-	except ImportError:
-		from SCons.Options.EnumOption import EnumOption
-	opts.Add(BoolOption('debug', 'debug build', 'no'))
-	opts.Add(BoolOption('profile', 'profile build', 'no'))
-	opts.Add(BoolOption('quiet', 'quiet command lines', 'yes'))
-	opts.Add(EnumOption('machine', 'use machine-specific assembly code', default_machine,
-											 allowed_values=('generic', 'ppc', 'x86', 'x86_64')))
-	opts.Add(EnumOption('platform', 'target platform', default_platform,
-											 allowed_values=('linux', 'cell', 'windows', 'winddk', 'wince', 'darwin')))
-	opts.Add(EnumOption('toolchain', 'compiler toolchain', 'default',
-											 allowed_values=('default', 'crossmingw', 'winsdk', 'winddk')))
-	opts.Add(BoolOption('llvm', 'use LLVM', 'no'))
-	opts.Add(BoolOption('dri', 'build DRI drivers', default_dri))
-

configs/.gitignore

@@ -1,2 +0,0 @@
-current
-autoconf

configs/aix

@@ -13,6 +13,7 @@ CXXFLAGS = -O -DAIXV3 -DPTHREADS
 
 # Misc tools and flags
 MKLIB_OPTIONS =
+COPY_LIBS = cp -f -h
 
 # Library names (actual file names)
 GL_LIB_NAME = libGL.a

configs/aix-gcc

@@ -11,10 +11,6 @@ CXX = g++
 CFLAGS = -O2 -DAIXV3
 CXXFLAGS = -O2 -DAIXV3
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 MKLIB_OPTIONS = -arch aix-gcc
 GL_LIB_DEPS = -lX11 -lXext -lm
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lm

configs/autoconf.in

@@ -1,148 +0,0 @@
-# Autoconf configuration
-
-# Pull in the defaults
-include $(TOP)/configs/default
-
-# This is generated by configure
-CONFIG_NAME = autoconf
-
-# Compiler and flags
-CC = @CC@
-CXX = @CXX@
-OPT_FLAGS = @OPT_FLAGS@
-ARCH_FLAGS = @ARCH_FLAGS@
-ASM_FLAGS = @ASM_FLAGS@
-PIC_FLAGS = @PIC_FLAGS@
-DEFINES = @DEFINES@
-CFLAGS = @CPPFLAGS@ @CFLAGS@ \
-	$(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(ASM_FLAGS) $(DEFINES)
-CXXFLAGS = @CPPFLAGS@ @CXXFLAGS@ \
-	$(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
-LDFLAGS = @LDFLAGS@
-EXTRA_LIB_PATH = @EXTRA_LIB_PATH@
-RADEON_CFLAGS = @RADEON_CFLAGS@
-RADEON_LDFLAGS = @RADEON_LDFLAGS@
-
-# Assembler
-MESA_ASM_SOURCES = @MESA_ASM_SOURCES@
-GLAPI_ASM_SOURCES = @GLAPI_ASM_SOURCES@
-
-# Misc tools and flags
-MAKE = @MAKE@
-SHELL = @SHELL@
-MKLIB_OPTIONS = @MKLIB_OPTIONS@
-MKDEP = @MKDEP@
-MKDEP_OPTIONS = @MKDEP_OPTIONS@
-INSTALL = @INSTALL@
-
-# Python and flags (generally only needed by the developers)
-PYTHON2 = python
-PYTHON_FLAGS = -t -O -O
-
-# Library names (base name)
-GL_LIB = GL
-GLU_LIB = GLU
-GLUT_LIB = glut
-GLW_LIB = GLw
-OSMESA_LIB = @OSMESA_LIB@
-
-# Library names (actual file names)
-GL_LIB_NAME = @GL_LIB_NAME@
-GLU_LIB_NAME = @GLU_LIB_NAME@
-GLUT_LIB_NAME = @GLUT_LIB_NAME@
-GLW_LIB_NAME = @GLW_LIB_NAME@
-OSMESA_LIB_NAME = @OSMESA_LIB_NAME@
-
-# Globs used to install the lib and all symlinks
-GL_LIB_GLOB = @GL_LIB_GLOB@
-GLU_LIB_GLOB = @GLU_LIB_GLOB@
-GLUT_LIB_GLOB = @GLUT_LIB_GLOB@
-GLW_LIB_GLOB = @GLW_LIB_GLOB@
-OSMESA_LIB_GLOB = @OSMESA_LIB_GLOB@
-
-# Directories to build
-LIB_DIR = @LIB_DIR@
-SRC_DIRS = @SRC_DIRS@
-GLU_DIRS = @GLU_DIRS@
-DRIVER_DIRS = @DRIVER_DIRS@
-GALLIUM_DIRS = @GALLIUM_DIRS@
-GALLIUM_AUXILIARY_DIRS = @GALLIUM_AUXILIARY_DIRS@
-GALLIUM_DRIVERS_DIRS = @GALLIUM_DRIVERS_DIRS@
-GALLIUM_WINSYS_DIRS = @GALLIUM_WINSYS_DIRS@
-GALLIUM_WINSYS_DRM_DIRS = @GALLIUM_WINSYS_DRM_DIRS@
-GALLIUM_STATE_TRACKERS_DIRS = @GALLIUM_STATE_TRACKERS_DIRS@
-GALLIUM_AUXILIARIES = $(foreach DIR,$(GALLIUM_AUXILIARY_DIRS),$(TOP)/src/gallium/auxiliary/$(DIR)/lib$(DIR).a)
-GALLIUM_DRIVERS = $(foreach DIR,$(GALLIUM_DRIVERS_DIRS),$(TOP)/src/gallium/drivers/$(DIR)/lib$(DIR).a)
-
-# Which subdirs under $(TOP)/progs/ to enter:
-PROGRAM_DIRS = @PROGRAM_DIRS@
-
-# Driver specific build vars
-DRI_DIRS = @DRI_DIRS@ 
-WINDOW_SYSTEM = @WINDOW_SYSTEM@
-USING_EGL = @USING_EGL@
-
-# Dependencies
-X11_INCLUDES = @X11_INCLUDES@
-
-# GLw motif setup
-GLW_SOURCES = @GLW_SOURCES@
-MOTIF_CFLAGS = @MOTIF_CFLAGS@
-
-# Library/program dependencies
-GL_LIB_DEPS = $(EXTRA_LIB_PATH) @GL_LIB_DEPS@
-OSMESA_LIB_DEPS = -L$(TOP)/$(LIB_DIR) @OSMESA_MESA_DEPS@ \
-	$(EXTRA_LIB_PATH) @OSMESA_LIB_DEPS@
-EGL_LIB_DEPS = $(EXTRA_LIB_PATH) @EGL_LIB_DEPS@
-GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) @GLU_MESA_DEPS@ \
-	$(EXTRA_LIB_PATH) @GLU_LIB_DEPS@
-GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) @GLUT_MESA_DEPS@ \
-	$(EXTRA_LIB_PATH) @GLUT_LIB_DEPS@
-GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) @GLW_MESA_DEPS@ \
-	$(EXTRA_LIB_PATH) @GLW_LIB_DEPS@
-APP_LIB_DEPS = $(EXTRA_LIB_PATH) @APP_LIB_DEPS@
-
-# DRI dependencies
-DRI_LIB_DEPS = $(EXTRA_LIB_PATH) @DRI_LIB_DEPS@
-LIBDRM_CFLAGS = @LIBDRM_CFLAGS@
-LIBDRM_LIB = @LIBDRM_LIBS@
-DRI2PROTO_CFLAGS = @DRI2PROTO_CFLAGS@
-EXPAT_INCLUDES = @EXPAT_INCLUDES@
-
-# Autoconf directories
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-libdir = @libdir@
-includedir = @includedir@
-
-# Installation directories (for make install)
-INSTALL_DIR = $(prefix)
-INSTALL_LIB_DIR = $(libdir)
-INSTALL_INC_DIR = $(includedir)
-
-# DRI installation directories
-DRI_DRIVER_INSTALL_DIR = @DRI_DRIVER_INSTALL_DIR@
-
-# Where libGL will look for DRI hardware drivers
-DRI_DRIVER_SEARCH_DIR = @DRI_DRIVER_SEARCH_DIR@
-
-# Xorg driver install directory (for xorg state-tracker)
-XORG_DRIVER_INSTALL_DIR = @XORG_DRIVER_INSTALL_DIR@
-
-# pkg-config substitutions
-GL_PC_REQ_PRIV = @GL_PC_REQ_PRIV@
-GL_PC_LIB_PRIV = @GL_PC_LIB_PRIV@
-GL_PC_CFLAGS = @GL_PC_CFLAGS@
-DRI_PC_REQ_PRIV = @DRI_PC_REQ_PRIV@
-GLU_PC_REQ = @GLU_PC_REQ@
-GLU_PC_REQ_PRIV = @GLU_PC_REQ_PRIV@
-GLU_PC_LIB_PRIV = @GLU_PC_LIB_PRIV@
-GLU_PC_CFLAGS = @GLU_PC_CFLAGS@
-GLUT_PC_REQ_PRIV = @GLUT_PC_REQ_PRIV@
-GLUT_PC_LIB_PRIV = @GLUT_PC_LIB_PRIV@
-GLUT_PC_CFLAGS = @GLUT_PC_CFLAGS@
-GLW_PC_REQ_PRIV = @GLW_PC_REQ_PRIV@
-GLW_PC_LIB_PRIV = @GLW_PC_LIB_PRIV@
-GLW_PC_CFLAGS = @GLW_PC_CFLAGS@
-OSMESA_PC_REQ = @OSMESA_PC_REQ@
-OSMESA_PC_LIB_PRIV = @OSMESA_PC_LIB_PRIV@

configs/beos

@@ -26,8 +26,8 @@ ifeq ($(CPU), x86)
 		-DUSE_3DNOW_ASM \
 		-DUSE_SSE_ASM
 	
-	MESA_ASM_SOURCES = $(X86_SOURCES)
-	GLAPI_ASM_SOURCES = $(X86_API)
+	ASM_SOURCES = $(X86_SOURCES)
+	ASM_API = $(X86_API)
 
 	CC = gcc
 	CXX = g++
@@ -39,10 +39,6 @@ ifeq ($(CPU), x86)
 
 	CXXFLAGS = $(CFLAGS)
 
-	# Work around aliasing bugs - developers should comment this out
-	CFLAGS += -fno-strict-aliasing
-	CXXFLAGS += -fno-strict-aliasing
-
 	LDFLAGS += -Xlinker
 
 	ifdef DEBUG
@@ -90,7 +86,7 @@ else
 endif
 
 # Directories
-SRC_DIRS = gallium mesa glu glut/beos glew
+SRC_DIRS = mesa glu glut/beos
 GLU_DIRS = sgi
 DRIVER_DIRS = beos
 PROGRAM_DIRS = beos samples redbook demos tests

configs/bluegene-osmesa

@@ -1,33 +0,0 @@
-# Configuration for building only libOSMesa on BlueGene, no Xlib driver
-# This doesn't really have a lot of dependencies, so it should be usable
-# on other (gcc-based) systems too.
-# It uses static linking and disables multithreading.
-
-include $(TOP)/configs/default
-
-CONFIG_NAME = bluegene-osmesa
-
-# Compiler and flags
-CC = /bgl/BlueLight/ppcfloor/blrts-gnu/bin/powerpc-bgl-blrts-gnu-gcc
-CXX = /bgl/BlueLight/ppcfloor/blrts-gnu/bin/powerpc-bgl-blrts-gnu-g++
-CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
-CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURC
-
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
-MKLIB_OPTIONS = -static
-
-OSMESA_LIB_NAME = libOSMesa.a
-
-# Directories
-SRC_DIRS = mesa glu
-DRIVER_DIRS = osmesa
-PROGRAM_DIRS = osdemos
-
-
-# Dependencies
-OSMESA_LIB_DEPS = -lm
-GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
-APP_LIB_DEPS = -lOSMesa -lGLU -lm

configs/bluegene-xlc-osmesa

@@ -1,29 +0,0 @@
-# Configuration for building only libOSMesa on BlueGene using the IBM xlc compiler
-# This doesn't really have a lot of dependencies, so it should be usable
-# on similar systems too.
-# It uses static linking and disables multithreading.
-
-include $(TOP)/configs/default
-
-CONFIG_NAME = bluegene-osmesa
-
-# Compiler and flags
-CC = /opt/ibmcmp/vacpp/bg/8.0/bin/blrts_xlc
-CXX = /opt/ibmcmp/vacpp/bg/8.0/bin/blrts_xlC
-CFLAGS = -O3 -pedantic -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
-CXXFLAGS = -O3 -pedantic -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
-
-MKLIB_OPTIONS = -static
-
-OSMESA_LIB_NAME = libOSMesa.a
-
-# Directories
-SRC_DIRS = mesa glu
-DRIVER_DIRS = osmesa
-PROGRAM_DIRS = osdemos
-
-
-# Dependencies
-OSMESA_LIB_DEPS = -lm
-GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
-APP_LIB_DEPS = -lOSMesa -lGLU -lm

configs/catamount-osmesa-pgi

@@ -1,32 +0,0 @@
-# Configuration for building only libOSMesa on Cray Xt3
-# for the compute nodes running Catamount using the 
-# Portland Group compiler. The Portland Group toolchain has to be 
-# enabled before using "module switch PrgEnv-gnu PrgEnv-pgi" .
-# This doesn't really have a lot of dependencies, so it should be usable
-# on other similar systems too.
-# It uses static linking and disables multithreading.
-
-include $(TOP)/configs/default
-
-CONFIG_NAME = catamount-osmesa-pgi
-
-# Compiler and flags
-CC = cc
-CXX = CC
-CFLAGS = -target=catamount -fastsse -O3 -Mnontemporal -Mprefetch=distance:8,nta   -fPIC -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
-CXXFLAGS = -target=catamount -fastsse -O3 -Mnontemporal -Mprefetch=distance:8,nta -fPIC -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
-
-MKLIB_OPTIONS = -static
-
-OSMESA_LIB_NAME = libOSMesa.a
-
-# Directories
-SRC_DIRS = mesa glu
-DRIVER_DIRS = osmesa
-PROGRAM_DIRS = osdemos
-
-
-# Dependencies
-OSMESA_LIB_DEPS = -lm
-GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
-APP_LIB_DEPS = -lOSMesa -lGLU -lm

configs/config.mgw

@@ -1,42 +0,0 @@
-# MinGW config include file updated for Mesa 7.0
-#
-#  Updated : by Heromyth, on 2007-7-21
-#  Email   : zxpmyth@yahoo.com.cn
-#  Bugs    : 1) All the default settings work fine. But the setting X86=1 can't work. 
-#            The others havn't been tested yet.
-#            2) The generated DLLs are *not* compatible with the ones built
-#            with the other compilers like VC8, especially for GLUT. 
-#            3) Although more tests are needed, it can be used individually!
-
-# The generated DLLs by MingW with STDCALL are not totally compatible 
-# with the ones linked by Microsoft's compilers.
-#
-# xxx_USING_STDCALL = 1          Compiling MESA with __stdcall. This is default!
-# 
-# xxx_USING_STDCALL = 0          Compiling MESA without __stdcall. I like this:)
-#  
-
-# In fact, GL_USING_STDCALL and GLUT_USING_STDCALL can be
-# different. For example:
-#
-#   GL_USING_STDCALL = 0
-#   GLUT_USING_STDCALL = 1
-# 
-# Suggested setting:
-#
-#     ALL_USING_STDCALL = 1
-#
-# That's default!
-#
-
-
-ALL_USING_STDCALL = 1
-
-
-ifeq ($(ALL_USING_STDCALL),1)
-  GL_USING_STDCALL = 1
-  GLUT_USING_STDCALL = 1
-else
-  GL_USING_STDCALL = 0
-  GLUT_USING_STDCALL = 0
-endif

configs/darwin

@@ -4,28 +4,11 @@ include $(TOP)/configs/default
 
 CONFIG_NAME = darwin
 
-INSTALL_DIR = /usr/X11
-
-X11_DIR = $(INSTALL_DIR)
-
 # Compiler and flags
-CC = gcc
-CXX = g++
-PIC_FLAGS = -fPIC
-DEFINES =  -D_DARWIN_C_SOURCE -DPTHREADS -D_GNU_SOURCE \
-	   -DGLX_ALIAS_UNSUPPORTED -DGLX_INDIRECT_RENDERING
-
-# -D_GNU_SOURCE          - for src/mesa/main ...
-# -DGLX_DIRECT_RENDERING - pulls in libdrm stuff in glx/x11
-# -DGLX_USE_APPLEGL      - supposed to be used with GLX_DIRECT_RENDERING to use AGL rather than DRM, but doesn't compile
-# -DIN_DRI_DRIVER
-
-ARCH_FLAGS += $(RC_CFLAGS)
-
-CFLAGS =  -ggdb3 -Os -Wall -Wmissing-prototypes -std=c99 -ffast-math -fno-strict-aliasing \
-	-I$(INSTALL_DIR)/include -I$(X11_DIR)/include $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(ASM_FLAGS) $(DEFINES)
-CXXFLAGS =  -ggdb3 -Os -Wall -fno-strict-aliasing \
-	-I$(INSTALL_DIR)/include -I$(X11_DIR)/include $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(ASM_FLAGS) $(DEFINES)
+CC = cc
+CXX = cc
+CFLAGS = -I/usr/X11R6/include -O3 -fPIC -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
+CXXFLAGS = -I/usr/X11R6/include -O3 -fPIC -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
 
 # Library names (actual file names)
 GL_LIB_NAME = libGL.dylib
@@ -34,24 +17,13 @@ GLUT_LIB_NAME = libglut.dylib
 GLW_LIB_NAME = libGLw.dylib
 OSMESA_LIB_NAME = libOSMesa.dylib
 
-# globs used to install the lib and all symlinks
-GL_LIB_GLOB = libGL.*dylib
-GLU_LIB_GLOB = libGLU.*dylib
-GLUT_LIB_GLOB = libglut.*dylib
-GLW_LIB_GLOB = libGLw.*dylib
-OSMESA_LIB_GLOB = libOSMesa.*dylib
-
-GL_LIB_DEPS = -L$(INSTALL_DIR)/$(LIB_DIR) -L$(X11_DIR)/$(LIB_DIR) -lX11 -lXext -lm -lpthread
-OSMESA_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB)
-GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB)
-GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB)  -L$(INSTALL_DIR)/$(LIB_DIR) -L$(X11_DIR)/$(LIB_DIR) -lX11 -lXmu -lXi -lXext
-GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -L$(INSTALL_DIR)/$(LIB_DIR) -L$(X11_DIR)/$(LIB_DIR) -lX11 -lXt
-APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L$(INSTALL_DIR)/$(LIB_DIR) -L$(X11_DIR)/$(LIB_DIR) -lX11 -lXmu -lXt -lXi -lm
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread
+OSMESA_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -lGL
+GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -lGL
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -lGL -lGLU -L/usr/X11R6/lib -lX11 -lXmu -lXi -lXext
+GLW_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXt $(TOP)/lib/GL.dylib
+APP_LIB_DEPS = -L$(TOP)/lib -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
 
 # omit glw lib for now:
-SRC_DIRS = glx/x11 mesa gallium glu glut/glx glew
-GLU_DIRS = sgi
-DRIVER_DIRS = osmesa
-#DRIVER_DIRS = dri
-DRI_DIRS = swrast
-PROGRAM_DIRS = xdemos
+SRC_DIRS = mesa glu glut/glx
+

configs/darwin-fat-32bit

@@ -1,7 +0,0 @@
-# Configuration for Darwin / MacOS X, making 32bit fat dynamic libs
-
-RC_CFLAGS=-arch ppc -arch i386
-
-include $(TOP)/configs/darwin
-
-CONFIG_NAME = darwin-fat-32bit

configs/darwin-fat-all

@@ -1,7 +0,0 @@
-# Configuration for Darwin / MacOS X, making 32bit and 64bit fat dynamic libs
-
-RC_CFLAGS=-arch ppc -arch i386 -arch ppc64 -arch x86_64
-
-include $(TOP)/configs/darwin
-
-CONFIG_NAME = darwin-fat-all

configs/darwin-static

@@ -0,0 +1,24 @@
+# Configuration for Darwin / MacOS X, making static libs
+
+include $(TOP)/configs/darwin
+
+CONFIG_NAME = darwin-static
+
+# Compiler and flags
+CFLAGS = -I/usr/X11R6/include -O3 -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
+CXXFLAGS = -I/usr/X11R6/include -O3 -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
+MKLIB_OPTIONS = -static
+
+# Library names (actual file names)
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a
+
+GL_LIB_DEPS =
+OSMESA_LIB_DEPS = 
+GLU_LIB_DEPS = 
+GLUT_LIB_DEPS = 
+GLW_LIB_DEPS = 
+APP_LIB_DEPS = -Wl,-search_paths_first -L$(TOP)/lib -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lstdc++ -lgcc_s.1 -lm

configs/darwin-static-x86ppc

@@ -0,0 +1,26 @@
+# Configuration for Darwin / MacOS X, making static libs
+
+include $(TOP)/configs/darwin
+
+CONFIG_NAME = darwin-static
+
+# Compiler and flags
+CFLAGS = -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk \
+         -I/usr/X11R6/include -O3 -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
+CXXFLAGS = -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk \
+           -I/usr/X11R6/include -O3 -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
+MKLIB_OPTIONS = -static -archopt "-isysroot /Developer/SDKs/MacOSX10.4u.sdk"
+
+# Library names (actual file names)
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a
+
+GL_LIB_DEPS =
+OSMESA_LIB_DEPS = 
+GLU_LIB_DEPS = 
+GLUT_LIB_DEPS = 
+GLW_LIB_DEPS = 
+APP_LIB_DEPS = -Wl,-search_paths_first -L$(TOP)/lib -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lstdc++ -lgcc_s.1 -lm

configs/darwin-x86ppc

@@ -29,5 +29,5 @@ GLW_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXt $(TOP)/lib/GL.dylib
 APP_LIB_DEPS = -L$(TOP)/lib -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
 
 # omit glw lib for now:
-SRC_DIRS = gallium mesa glu glut/glx glew
+SRC_DIRS = mesa glu glut/glx
 

configs/default

@@ -8,10 +8,9 @@
 CONFIG_NAME = default
 
 # Version info
-MESA_MAJOR=7
-MESA_MINOR=7
+MESA_MAJOR=6
+MESA_MINOR=5
 MESA_TINY=1
-MESA_VERSION = $(MESA_MAJOR).$(MESA_MINOR).$(MESA_TINY)
 
 # external projects.  This should be useless now that we use libdrm.
 DRM_SOURCE_PATH=$(TOP)/../drm
@@ -19,40 +18,26 @@ DRM_SOURCE_PATH=$(TOP)/../drm
 # Compiler and flags
 CC = cc
 CXX = CC
-HOST_CC = $(CC)
 CFLAGS = -O
 CXXFLAGS = -O
-LDFLAGS =
-HOST_CFLAGS = $(CFLAGS)
 GLU_CFLAGS = 
 
-# Compiler for building demos/tests/etc
-APP_CC = $(CC)
-APP_CXX = $(CXX)
-
 # Misc tools and flags
-SHELL = /bin/sh
-MKLIB = $(SHELL) $(TOP)/bin/mklib
 MKLIB_OPTIONS = 
 MKDEP = makedepend
 MKDEP_OPTIONS = -fdepend
 MAKE = make
+INSTALL = install
+COPY_LIBS = cp -f -d
 
-# Use MINSTALL for installing libraries, INSTALL for everything else
-MINSTALL = $(SHELL) $(TOP)/bin/minstall
-INSTALL = $(MINSTALL)
-
-# Tools for regenerating glapi (generally only needed by the developers)
+# Python and flags (generally only needed by the developers)
 PYTHON2 = python
 PYTHON_FLAGS = -t -O -O
-INDENT = indent
-INDENT_FLAGS = -i4 -nut -br -brs -npcs -ce -T GLubyte -T GLbyte -T Bool
 
 # Library names (base name)
 GL_LIB = GL
 GLU_LIB = GLU
 GLUT_LIB = glut
-GLEW_LIB = GLEW
 GLW_LIB = GLw
 OSMESA_LIB = OSMesa
 
@@ -61,88 +46,42 @@ OSMESA_LIB = OSMesa
 GL_LIB_NAME = lib$(GL_LIB).so
 GLU_LIB_NAME = lib$(GLU_LIB).so
 GLUT_LIB_NAME = lib$(GLUT_LIB).so
-GLEW_LIB_NAME = lib$(GLEW_LIB).a
 GLW_LIB_NAME = lib$(GLW_LIB).so
 OSMESA_LIB_NAME = lib$(OSMESA_LIB).so
 
-# globs used to install the lib and all symlinks
-GL_LIB_GLOB = $(GL_LIB_NAME)*
-GLU_LIB_GLOB = $(GLU_LIB_NAME)*
-GLUT_LIB_GLOB = $(GLUT_LIB_NAME)*
-GLW_LIB_GLOB = $(GLW_LIB_NAME)*
-OSMESA_LIB_GLOB = $(OSMESA_LIB_NAME)*
 
 # Optional assembly language optimization files for libGL
-MESA_ASM_SOURCES = 
+ASM_SOURCES = 
 
 # GLw widget sources (Append "GLwMDrawA.c" here and add -lXm to GLW_LIB_DEPS in
 # order to build the Motif widget too)
 GLW_SOURCES = GLwDrawA.c
-MOTIF_CFLAGS = -I/usr/include/Motif1.2
 
 
 # Directories to build
 LIB_DIR = lib
-SRC_DIRS = mesa gallium egl gallium/winsys glu glut/glx glew glw
+SRC_DIRS = mesa glu glut/glx glw
 GLU_DIRS = sgi
 DRIVER_DIRS = x11 osmesa
 # Which subdirs under $(TOP)/progs/ to enter:
-PROGRAM_DIRS = demos redbook samples glsl objviewer xdemos
-
-# EGL directories
-EGL_DRIVERS_DIRS = demo
-
-# Gallium directories and 
-GALLIUM_DIRS = auxiliary drivers state_trackers
-GALLIUM_AUXILIARY_DIRS = rbug draw translate cso_cache pipebuffer tgsi sct rtasm util indices vl
-GALLIUM_AUXILIARIES = $(foreach DIR,$(GALLIUM_AUXILIARY_DIRS),$(TOP)/src/gallium/auxiliary/$(DIR)/lib$(DIR).a)
-GALLIUM_DRIVERS_DIRS = softpipe failover svga i915 trace identity
-GALLIUM_DRIVERS = $(foreach DIR,$(GALLIUM_DRIVERS_DIRS),$(TOP)/src/gallium/drivers/$(DIR)/lib$(DIR).a)
-GALLIUM_WINSYS_DIRS = xlib egl_xlib
-GALLIUM_WINSYS_DRM_DIRS =
-GALLIUM_STATE_TRACKERS_DIRS = glx
+PROGRAM_DIRS = demos redbook samples xdemos
 
 
-# Library dependencies
-#EXTRA_LIB_PATH ?=
-GL_LIB_DEPS     = $(EXTRA_LIB_PATH) -lX11 -lXext -lm -lpthread
-EGL_LIB_DEPS    = $(EXTRA_LIB_PATH) -ldl -lpthread
-OSMESA_LIB_DEPS = $(EXTRA_LIB_PATH) -L$(TOP)/$(LIB_DIR) -l$(GL_LIB)
-GLU_LIB_DEPS    = $(EXTRA_LIB_PATH) -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lm
-GLUT_LIB_DEPS   = $(EXTRA_LIB_PATH) -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -lX11 -lXmu -lXi -lm
-GLW_LIB_DEPS    = $(EXTRA_LIB_PATH) -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lXt -lX11
-APP_LIB_DEPS    = $(EXTRA_LIB_PATH) -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm
+# Library/program dependencies
+EXTRA_LIB_PATH ?=
+GL_LIB_DEPS = $(EXTRA_LIB_PATH) -lX11 -lXext -lm -lpthread
+OSMESA_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB)
+GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lm
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) $(EXTRA_LIB_PATH) -lX11 -lXmu -lXt -lXi -lm
+GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) $(EXTRA_LIB_PATH) -lXt -lX11
+APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm
 
-# Program dependencies - specific GL/glut libraries added in Makefiles
-APP_LIB_DEPS = -lm
 
 
 # Installation directories (for make install)
 INSTALL_DIR = /usr/local
-INSTALL_LIB_DIR = $(INSTALL_DIR)/$(LIB_DIR)
-INSTALL_INC_DIR = $(INSTALL_DIR)/include
-DRI_DRIVER_INSTALL_DIR = $(INSTALL_LIB_DIR)/dri
+DRI_DRIVER_INSTALL_DIR = /usr/X11R6/lib/modules/dri
 
 # Where libGL will look for DRI hardware drivers
 DRI_DRIVER_SEARCH_DIR = $(DRI_DRIVER_INSTALL_DIR)
 
-# Xorg driver install directory (for xorg state-tracker)
-XORG_DRIVER_INSTALL_DIR = $(INSTALL_LIB_DIR)/xorg/modules/drivers
-
-# pkg-config substitutions
-GL_PC_REQ_PRIV =
-GL_PC_LIB_PRIV =
-GL_PC_CFLAGS =
-DRI_PC_REQ_PRIV =
-GLU_PC_REQ = gl
-GLU_PC_REQ_PRIV =
-GLU_PC_LIB_PRIV =
-GLU_PC_CFLAGS =
-GLUT_PC_REQ_PRIV =
-GLUT_PC_LIB_PRIV =
-GLUT_PC_CFLAGS =
-GLW_PC_REQ_PRIV =
-GLW_PC_LIB_PRIV =
-GLW_PC_CFLAGS =
-OSMESA_PC_REQ =
-OSMESA_PC_LIB_PRIV =

configs/freebsd

@@ -9,13 +9,15 @@ CC = cc
 CXX = c++
 MAKE = gmake
 
+# cp -d not supported on FreeBSD (see bug 4435)
+COPY_LIBS = cp -f
+
 OPT_FLAGS  = -O2
 PIC_FLAGS  = -fPIC
 
-DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_BSD_SOURCE -DUSE_XSHM \
-	-DHZ=100
+DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_BSD_SOURCE -DUSE_XSHM -DHZ=100
 
-X11_INCLUDES = -I/usr/local/include
+X11_INCLUDES = -I/usr/X11R6/include
 
 CFLAGS += $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(DEFINES) $(X11_INCLUDES) -ffast-math -pedantic
 
@@ -23,9 +25,5 @@ CXXFLAGS += $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(DEFINES) $(X11_INCLUDES)
 
 GLUT_CFLAGS = -fexceptions
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
-EXTRA_LIB_PATH = -L/usr/local/lib
+EXTRA_LIB_PATH = -L/usr/X11R6/lib
 APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) $(EXTRA_LIB_PATH) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lXext -lXmu -lXi -lX11 -lm

configs/freebsd-dri

@@ -9,39 +9,31 @@ CONFIG_NAME = freebsd-dri
 CC = gcc
 CXX = g++
 WARN_FLAGS = -Wall
-OPT_FLAGS = -O -g
+OPT_FLAGS = -O
 
 EXPAT_INCLUDES = -I/usr/local/include
-X11_INCLUDES = -I/usr/local/include
+X11_INCLUDES = -I/usr/X11R6/include
 DEFINES = -DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 -DIN_DRI_DRIVER \
-	-DGLX_DIRECT_RENDERING -DGLX_INDIRECT_RENDERING \
-	-DHAVE_ALIAS
+	-DGLX_DIRECT_RENDERING -DHAVE_ALIAS
 
-CFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) -Wmissing-prototypes -std=c99 -Wundef -ffast-math \
+CFLAGS = -Wmissing-prototypes -g -std=c99 -Wundef -fPIC -ffast-math \
 	$(ASM_FLAGS) $(X11_INCLUDES) $(DEFINES)
 
-CXXFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(DEFINES) -Wall -ansi -pedantic $(ASM_FLAGS) $(X11_INCLUDES) 
-
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
+CXXFLAGS = $(DEFINES) -Wall -g -ansi -pedantic -fPIC
 
 ASM_SOURCES = 
-MESA_ASM_SOURCES = 
 
 # Library/program dependencies
-LIBDRM_CFLAGS = `pkg-config --cflags libdrm`
 LIBDRM_LIB = `pkg-config --libs libdrm`
-DRI_LIB_DEPS = -L/usr/local/lib -lm -pthread -lexpat $(LIBDRM_LIB)
-GL_LIB_DEPS = -L/usr/local/lib -lX11 -lXext -lXxf86vm -lXdamage -lXfixes \
-	-lm -pthread $(LIBDRM_LIB)
+DRI_LIB_DEPS = -L/usr/local/lib -lm -lpthread -lexpat $(LIBDRM_LIB)
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lXxf86vm -lm -lpthread $(LIBDRM_LIB)
 
-GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/local/lib -lGLU -lGL -lX11 -lXmu -lXt -lXi -lm
-GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/local/lib -lGL -lXt -lX11
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/X11R6/lib -lGLU -lGL -lX11 -lXmu -lXt -lXi -lm
+GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/X11R6/lib -lGL -lXt -lXm -lX11
 
 
 # Directories
-SRC_DIRS = glx/x11 gallium mesa glu glut/glx glew glw
+SRC_DIRS = glx/x11 mesa glu glut/glx glw
 DRIVER_DIRS = dri
 PROGRAM_DIRS = 
 WINDOW_SYSTEM=dri
@@ -50,6 +42,6 @@ DRM_SOURCE_PATH=$(TOP)/../drm
 
 # ffb and gamma are missing because they have not been converted to use the new
 # interface.
-DRI_DIRS = i810 i915 i965 mach64 mga r128 r200 r300 radeon tdfx \
+DRI_DIRS = i810 i915 mach64 mga r128 r200 r300 radeon tdfx \
 	   unichrome savage sis
 

configs/freebsd-dri-amd64

@@ -6,5 +6,5 @@ include $(TOP)/configs/freebsd-dri
 CONFIG_NAME = freebsd-dri-x86-64
 
 ASM_FLAGS = -DUSE_X86_64_ASM
-MESA_ASM_SOURCES = $(X86-64_SOURCES)
-GLAPI_ASM_SOURCES = $(X86-64_API)
+ASM_SOURCES = $(X86-64_SOURCES)
+ASM_API = $(X86-64_API)

configs/freebsd-dri-x86

@@ -9,5 +9,5 @@ CONFIG_NAME = freebsd-dri-x86
 PIC_FLAGS = 
 
 ASM_FLAGS = -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM
-MESA_ASM_SOURCES = $(X86_SOURCES)
-GLAPI_ASM_SOURCES = $(X86_API)
+ASM_SOURCES = $(X86_SOURCES)
+ASM_API = $(X86_API)

configs/hpux10

@@ -8,7 +8,7 @@ CONFIG_NAME = hpux10
 CC = cc
 CXX = aCC
 
-CFLAGS = -O +DAportable +z -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM
-CXXFLAGS = -O +DAportable +Z -Ae -D_HPUX_SOURCE
+CFLAGS = +O3 +DAportable +z -Aa -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM
+CXXFLAGS = +O3 +DAportable +Z -Aa -D_HPUX_SOURCE
 
 APP_LIB_DEPS = -$(TOP)/$(LIB_DIR) -L/usr/lib/X11R6 -L/usr/contrib/X11R6/lib -lXext -lXmu -lXi -lX11 -lm

configs/hpux10-gcc

@@ -12,9 +12,5 @@ CFLAGS = -ansi -O3 -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/incl
 CXXFLAGS = -ansi -O3 -D_HPUX_SOURCE
 GLUT_CFLAGS = -fexceptions
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/lib/X11R6 -L/usr/contrib/X11R6/lib -lXext -lXmu -lXi -lX11 -lm
 

configs/hpux10-static

@@ -8,8 +8,8 @@ CONFIG_NAME = hpux10-static
 CC = cc
 CXX = aCC
 
-CFLAGS = -O +DAportable +z -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM
-CXXFLAGS = -O +DAportable +Z -Ae -D_HPUX_SOURCE
+CFLAGS = +O3 +DAportable +z -Aa -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM
+CXXFLAGS = +O3 +DAportable +Z -Aa -D_HPUX_SOURCE
 
 MKLIB_OPTIONS = -static
 

configs/hpux11-32

@@ -8,9 +8,9 @@ CONFIG_NAME = hpux11-32
 CC = cc
 CXX = aCC
 
-CFLAGS = +z -Ae -O +Onolimit -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
+CFLAGS = +z -Ae +O2 +Onolimit +Oaggressive -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
 
-CXXFLAGS = +z -Ae -O +Onolimit -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS
+CXXFLAGS = +z -Aa +O2 +Onolimit +Oaggressive -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS
 
 MKLIB_OPTIONS =
 

configs/hpux11-32-static

@@ -8,9 +8,9 @@ CONFIG_NAME = hpux11-32-static
 CC = cc
 CXX = aCC
 
-CFLAGS = -O +DA2.0 -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
+CFLAGS = +O3 +DA2.0 -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
 
-CXXFLAGS = -O +DA2.0 -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS
+CXXFLAGS = +O3 +DA2.0 -Aa -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS
 
 MKLIB_OPTIONS = -static
 

configs/hpux11-32-static-nothreads

@@ -8,9 +8,9 @@ CONFIG_NAME = hpux11-32-static
 CC = cc
 CXX = aCC
 
-CFLAGS = -O +DA2.0 -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM
+CFLAGS = +O3 +DA2.0 -Aa -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM
 
-CXXFLAGS = -O +DA2.0 -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include
+CXXFLAGS = +O3 +DA2.0 -Aa -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include
 
 MKLIB_OPTIONS = -static
 

configs/hpux11-64

@@ -8,9 +8,9 @@ CONFIG_NAME = hpux11-64
 CC = cc
 CXX = aCC
 
-CFLAGS = +z -Ae +DD64 -O +Onolimit -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
+CFLAGS = +z -Ae +DD64 +O2 +Onolimit +Oaggressive -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
 
-CXXFLAGS = +z -Ae +DD64 -O +Onolimit -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS
+CXXFLAGS = +z -Aa +DD64 +O2 +Onolimit +Oaggressive -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS
 
 MKLIB_OPTIONS =
 

configs/hpux11-64-static

@@ -8,9 +8,9 @@ CONFIG_NAME = hpux11-64-static
 CC = cc
 CXX = aCC
 
-CFLAGS = -O +DA2.0W -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
+CFLAGS = +O3 +DA2.0W -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
 
-CXXFLAGS = -O +DA2.0W -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS
+CXXFLAGS = +O3 +DA2.0W -Aa -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS
 
 MKLIB_OPTIONS = -static
 

configs/hpux11-ia64

@@ -8,9 +8,9 @@ CONFIG_NAME = hpux11-ia64
 CC = cc
 CXX = aCC
 
-CFLAGS = +z -Ae +DD64 -O +DSmckinley -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
+CFLAGS = +z -Ae +DD64 +O3 +DSmckinley -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
 
-CXXFLAGS = +z -Ae +DD64 -O +DSmckinley -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS
+CXXFLAGS = +z -Aa +DD64 +O3 +DSmckinley -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS
 
 MKLIB_OPTIONS =
 

configs/hpux11-ia64-static

@@ -8,9 +8,9 @@ CONFIG_NAME = hpux11-ia64-static
 CC = cc
 CXX = aCC
 
-CFLAGS = -O +DD64 -Ae -D_HPUX_SOURCE +DSmckinley -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
+CFLAGS = +O3 +DD64 -Aa -D_HPUX_SOURCE +DSmckinley -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
 
-CXXFLAGS = -O +DD64 -Ae -D_HPUX_SOURCE +DSmckinley -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS
+CXXFLAGS = +O3 +DD64 -Aa -D_HPUX_SOURCE +DSmckinley -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS
 
 MKLIB_OPTIONS = -static
 

configs/hpux9

@@ -9,8 +9,8 @@ CC = cc
 # XXX fix this
 CXX = c++
 
-CFLAGS = +z -O +Olibcalls +ESlit -Ae +Onolimit -D_HPUX_SOURCE -I/usr/include/X11R5 -DUSE_XSHM
-CXXFLAGS = +z -O +Olibcalls +ESlit -Ae +Onolimit -D_HPUX_SOURCE -I/usr/include/X11R5
+CFLAGS = +z +O3 +Olibcalls +ESlit -Aa +Onolimit -D_HPUX_SOURCE -I/usr/include/X11R5 -DUSE_XSHM
+CXXFLAGS = +z +O3 +Olibcalls +ESlit -Aa +Onolimit -D_HPUX_SOURCE -I/usr/include/X11R5
 
 APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/lib/X11R5 -s -Wl,+s,-B,nonfatal,-B,immediate -lXext -lXmu -lXi -lX11 -lm
 

configs/hpux9-gcc

@@ -8,7 +8,7 @@ CONFIG_NAME = hpux9-gcc
 CC = cc
 CXX = aCC
 
-CFLAGS = -O +DAportable +z -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM
-CXXFLAGS = -O +DAportable +Z -Ae -D_HPUX_SOURCE
+CFLAGS = +O3 +DAportable +z -Aa -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM
+CXXFLAGS = +O3 +DAportable +Z -Aa -D_HPUX_SOURCE
 
 APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/lib/X11R6 -L/usr/contrib/X11R6/lib -lXext -lXmu -lXi -lX11 -lm

configs/linux

@@ -17,21 +17,15 @@ PIC_FLAGS  = -fPIC
 ARCH_FLAGS ?=
 
 DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
-	-D_BSD_SOURCE -D_GNU_SOURCE \
-	-DPTHREADS -DUSE_XSHM -DHAVE_POSIX_MEMALIGN
+	-D_BSD_SOURCE -DPTHREADS -DUSE_XSHM
 
 X11_INCLUDES = -I/usr/X11R6/include
 
-CFLAGS = -Wall -Wmissing-prototypes -Wdeclaration-after-statement \
-	-Wpointer-arith $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) \
-	$(DEFINES) $(ASM_FLAGS) $(X11_INCLUDES) -std=c99 -ffast-math
+CFLAGS = -Wall -Wmissing-prototypes $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) \
+	$(DEFINES) $(ASM_FLAGS) $(X11_INCLUDES) -std=c99 -ffast-math 
 
-CXXFLAGS = -Wall -Wpointer-arith $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) \
-	$(DEFINES) $(X11_INCLUDES)
-
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
+CXXFLAGS = -Wall $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \
+	$(X11_INCLUDES) 
 
 GLUT_CFLAGS = -fexceptions
 

configs/linux-alpha

@@ -11,10 +11,6 @@ CFLAGS = -O3 -mcpu=ev5 -ansi -mieee -pedantic -fPIC -D_XOPEN_SOURCE -DUSE_XSHM
 CXXFLAGS = -O3 -mcpu=ev5 -ansi -mieee -pedantic -fPIC -D_XOPEN_SOURCE
 GLUT_CFLAGS = -fexceptions
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread
 GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
 GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -L/usr/X11R6/lib -lXt -lX11

configs/linux-alpha-static

@@ -11,11 +11,7 @@ CFLAGS = -O3 -mcpu=ev5 -ansi -mieee -pedantic -D_XOPEN_SOURCE -DUSE_XSHM
 CXXFLAGS = -O3 -mcpu=ev5 -ansi -mieee -pedantic -D_XOPEN_SOURCE
 GLUT_CFLAGS = -fexceptions
 MKLIB_OPTIONS = -static
-PIC_FLAGS =
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
 
 # Library names (actual file names)
 GL_LIB_NAME = libGL.a

configs/linux-cell

@@ -1,67 +0,0 @@
-# linux-cell  (non-debug build)
-
-include $(TOP)/configs/default
-
-CONFIG_NAME = linux-cell
-
-
-# Omiting other gallium drivers:
-GALLIUM_DRIVERS_DIRS = cell softpipe trace
-
-
-# Compiler and flags
-CC = ppu32-gcc
-CXX = ppu32-g++
-HOST_CC = gcc
-APP_CC = gcc
-APP_CXX = g++
-
-OPT_FLAGS = -O3
-
-# Cell SDK location
-## For SDK 2.1: (plus, remove -DSPU_MAIN_PARAM_LONG_LONG below)
-#SDK = /opt/ibm/cell-sdk/prototype/sysroot/usr
-## For SDK 3.0:
-SDK = /opt/cell/sdk/usr
-
-
-CFLAGS = $(OPT_FLAGS) -Wall -Winline -Wmissing-prototypes \
-	-fPIC -m32 -std=c99 -mabi=altivec -maltivec \
-	-I. -I$(SDK)/include \
-	-DGALLIUM_CELL -DUSE_XSHM -D_BSD_SOURCE -D_SVID_SOURCE
-
-CXXFLAGS = $(CFLAGS)
-
-# Omitting glw here:
-SRC_DIRS = gallium mesa gallium/winsys glu glut/glx glew
-
-# Build no traditional Mesa drivers:
-DRIVER_DIRS =
-
-
-MKDEP_OPTIONS = -fdepend -Y
-
-
-GL_LIB_DEPS = $(EXTRA_LIB_PATH) -lX11 -lXext -lm -lpthread \
-	-L$(SDK)/lib -m32 -Wl,-m,elf32ppc -R$(SDK)/lib -lspe2
-
-
-CELL_SPU_LIB = $(TOP)/src/gallium/drivers/cell/spu/g3d_spu.a
-
-
-### SPU stuff
-
-SPU_CC = spu-gcc
-
-SPU_CFLAGS = $(OPT_FLAGS) -W -Wall -Winline -Wmissing-prototypes -Wno-main \
-	-I. -I$(SDK)/spu/include -I$(TOP)/src/mesa/ $(INCLUDE_DIRS) \
-	-DSPU_MAIN_PARAM_LONG_LONG \
-	-include spu_intrinsics.h
-
-SPU_LFLAGS = -L$(SDK)/spu/lib -Wl,-N -lmisc -lm
-
-SPU_AR = ppu-ar
-SPU_AR_FLAGS = -qcs
-
-SPU_EMBED = ppu32-embedspu
-SPU_EMBED_FLAGS = -m32

configs/linux-cell-debug

@@ -1,10 +0,0 @@
-# linux-cell-debug
-
-include $(TOP)/configs/linux-cell
-
-# just override name and OPT_FLAGS here:
-
-CONFIG_NAME = linux-cell-debug
-
-OPT_FLAGS = -g -DDEBUG
-

configs/linux-debug

@@ -4,6 +4,5 @@ include $(TOP)/configs/linux
 
 CONFIG_NAME = linux-debug
 
-OPT_FLAGS = -g
-CFLAGS += -ansi -pedantic
+OPT_FLAGS = -g -ansi -pedantic
 DEFINES += -DDEBUG -DDEBUG_MATH

configs/linux-directfb

@@ -13,20 +13,16 @@ CFLAGS   = -Wall -O3 -ffast-math -fPIC -std=c99 -D_GNU_SOURCE -D_POSIX_SOURCE -D
 
 CXXFLAGS = -Wall -O3 -fPIC -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE   
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 HAVE_X86 = $(shell uname -m | grep 'i[3-6]86' >/dev/null && echo yes)
 ifeq ($(HAVE_X86), yes)
      CFLAGS   += -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM
      CXXFLAGS += -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM
-     MESA_ASM_SOURCES = $(X86_SOURCES)
-     GLAPI_ASM_SOURCES = $(X86_API)
+     ASM_SOURCES = $(X86_SOURCES)
+     ASM_API = $(X86_API)
 endif
 
 # Directories
-SRC_DIRS     = gallium mesa glu glut/directfb glew
+SRC_DIRS     = mesa glu glut/directfb
 GLU_DIRS     = sgi
 DRIVER_DIRS  = directfb
 PROGRAM_DIRS = demos directfb

configs/linux-dri

@@ -13,7 +13,7 @@ CXX = g++
 #MKDEP = gcc -M
 #MKDEP_OPTIONS = -MF depend
 
-OPT_FLAGS  = -O2 -g
+OPT_FLAGS  = -O -g
 PIC_FLAGS  = -fPIC
 
 # Add '-DGLX_USE_TLS' to ARCH_FLAGS to enable TLS support.
@@ -22,8 +22,7 @@ ARCH_FLAGS ?=
 DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
 	-D_BSD_SOURCE -D_GNU_SOURCE \
 	-DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 -DIN_DRI_DRIVER \
-	-DGLX_DIRECT_RENDERING -DGLX_INDIRECT_RENDERING \
-	-DHAVE_ALIAS -DHAVE_POSIX_MEMALIGN
+	-DGLX_DIRECT_RENDERING -DHAVE_ALIAS
 
 X11_INCLUDES = -I/usr/X11R6/include
 
@@ -32,36 +31,37 @@ CFLAGS = -Wall -Wmissing-prototypes -std=c99 -ffast-math \
 
 CXXFLAGS = -Wall $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
 
-GLUT_CFLAGS = -fexceptions
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
-MESA_ASM_SOURCES = 
+ASM_SOURCES = 
 
 # Library/program dependencies
 EXTRA_LIB_PATH=-L/usr/X11R6/lib
 
-LIBDRM_CFLAGS = $(shell pkg-config --cflags libdrm)
-LIBDRM_LIB = $(shell pkg-config --libs libdrm)
+LIBDRM_LIB = `pkg-config --libs libdrm`
 DRI_LIB_DEPS  = $(EXTRA_LIB_PATH) -lm -lpthread -lexpat -ldl $(LIBDRM_LIB)
-GL_LIB_DEPS   = $(EXTRA_LIB_PATH) -lX11 -lXext -lXxf86vm -lXdamage -lXfixes \
-		-lm -lpthread -ldl $(LIBDRM_LIB)
+GL_LIB_DEPS   = $(EXTRA_LIB_PATH) -lX11 -lXext -lXxf86vm -lm -lpthread -ldl \
+                $(LIBDRM_LIB)
 
 
+# This is now 0 by default since it seems to confuse the hell out of people
+# and generate a lot of extra noise on bugzilla.  If you need to build with
+# EGL, do 'make linux-dri USING_EGL=1'
+
+USING_EGL=0
+
 # Directories
-SRC_DIRS := glx/x11 egl $(SRC_DIRS)
-PROGRAM_DIRS := egl $(PROGRAM_DIRS)
-
-# EGL directories
-EGL_DRIVERS_DIRS = demo glx
+ifeq ($(USING_EGL), 1)
+SRC_DIRS = egl glx/x11 mesa glu glut/glx glw
+PROGRAM_DIRS = egl
+else
+SRC_DIRS = glx/x11 mesa glu glut/glx glw
+PROGRAM_DIRS =
+endif
 
 DRIVER_DIRS = dri
-WINDOW_SYSTEM = dri
-GALLIUM_WINSYS_DIRS = drm
-GALLIUM_WINSYS_DRM_DIRS = vmware intel
-GALLIUM_STATE_TRACKERS_DIRS = egl
+WINDOW_SYSTEM=dri
 
-DRI_DIRS = i810 i915 i965 mach64 mga r128 r200 r300 radeon \
-	savage sis tdfx unichrome ffb swrast
+# gamma are missing because they have not been converted to use the new
+# interface.
+DRI_DIRS = i810 i915 mach64 mga r128 r200 r300 radeon s3v \
+	savage sis tdfx trident unichrome ffb

configs/linux-dri-debug

@@ -1,16 +0,0 @@
-# -*-makefile-*-
-# Configuration for linux-dri-debug: Linux DRI hardware drivers for XFree86 & others
-
-include $(TOP)/configs/linux-dri
-
-CONFIG_NAME = linux-dri-debug
-OPT_FLAGS  = -O0 -g
-ARCH_FLAGS = -DDEBUG
-
-# Helpful to reduce the amount of stuff that gets built sometimes:
-#DRI_DIRS = i915tex i915 
-#DRI_DIRS = i965
-#DRI_DIRS = radeon r200 r300
-#DRI_DIRS = unichrome sis
-#DRI_DIRS = i810 mga r128 tdfx
-

configs/linux-dri-ppc

@@ -9,7 +9,7 @@ OPT_FLAGS = -Os -mcpu=603
 PIC_FLAGS = -fPIC
 
 ASM_FLAGS = -DUSE_PPC_ASM -DUSE_VMX_ASM
-MESA_ASM_SOURCES = $(PPC_SOURCES)
+ASM_SOURCES = $(PPC_SOURCES)
 
 # Build only the drivers for cards that exist on PowerPC.  At some point MGA
 # will be added, but not yet.

configs/linux-dri-x86

@@ -5,9 +5,13 @@ include $(TOP)/configs/linux-dri
 
 CONFIG_NAME = linux-dri-x86
 
-ARCH_FLAGS = -m32 -mmmx -msse -msse2
+# Unnecessary on x86, generally.
+PIC_FLAGS = 
+
+# Add -m32 to CFLAGS:
+ARCH_FLAGS = -m32
 
 ASM_FLAGS = -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM
-MESA_ASM_SOURCES = $(X86_SOURCES)
-GLAPI_ASM_SOURCES = $(X86_API)
+ASM_SOURCES = $(X86_SOURCES)
+ASM_API = $(X86_API)
 

configs/linux-dri-x86-64

@@ -8,8 +8,8 @@ CONFIG_NAME = linux-dri-x86-64
 ARCH_FLAGS = -m64
 
 ASM_FLAGS = -DUSE_X86_64_ASM
-MESA_ASM_SOURCES = $(X86-64_SOURCES)
-GLAPI_ASM_SOURCES = $(X86-64_API)
+ASM_SOURCES = $(X86-64_SOURCES)
+ASM_API = $(X86-64_API)
 
 LIB_DIR = lib64
 
@@ -20,5 +20,5 @@ EXTRA_LIB_PATH=-L/usr/X11R6/lib64
 # the new interface.  i810 are missing because there is no x86-64
 # system where they could *ever* be used.
 #
-DRI_DIRS = i915 i965 mach64 mga r128 r200 r300 radeon savage tdfx unichrome
+DRI_DIRS = i915 mach64 mga r128 r200 radeon tdfx unichrome savage r300
 

configs/linux-dri-xcb

@@ -22,30 +22,25 @@ ARCH_FLAGS ?=
 DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
 	-D_BSD_SOURCE -D_GNU_SOURCE \
 	-DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 -DIN_DRI_DRIVER \
-	-DGLX_DIRECT_RENDERING -DGLX_INDIRECT_RENDERING \
-        -DHAVE_ALIAS -DUSE_XCB -DHAVE_POSIX_MEMALIGN
+	-DGLX_DIRECT_RENDERING -DHAVE_ALIAS -DUSE_XCB
 
-X11_INCLUDES = $(shell pkg-config --cflags-only-I x11) $(shell pkg-config --cflags-only-I xcb) $(shell pkg-config --cflags-only-I x11-xcb) $(shell pkg-config --cflags-only-I xcb-glx)
+X11_INCLUDES = `pkg-config --cflags-only-I x11` `pkg-config --cflags-only-I xcb` `pkg-config --cflags-only-I xcb-glx`
 
 CFLAGS = -Wall -Wmissing-prototypes $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) \
 	$(DEFINES) $(ASM_FLAGS) -std=c99 -ffast-math 
 
 CXXFLAGS = -Wall $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
 
-MESA_ASM_SOURCES = 
+ASM_SOURCES = 
 
 # Library/program dependencies
-EXTRA_LIB_PATH=$(shell pkg-config --libs-only-L x11)
+EXTRA_LIB_PATH=`pkg-config --libs-only-L x11`
 
-LIBDRM_CFLAGS = $(shell pkg-config --cflags libdrm)
-LIBDRM_LIB = $(shell pkg-config --libs libdrm)
+LIBDRM_LIB = `pkg-config --libs libdrm`
 DRI_LIB_DEPS  = $(EXTRA_LIB_PATH) -lm -lpthread -lexpat -ldl $(LIBDRM_LIB)
 GL_LIB_DEPS   = $(EXTRA_LIB_PATH) -lX11 -lXext -lXxf86vm -lm -lpthread -ldl \
-                $(LIBDRM_LIB) $(shell pkg-config --libs xcb) $(shell pkg-config --libs x11-xcb) $(shell pkg-config --libs xcb-glx)
+                $(LIBDRM_LIB) `pkg-config --libs xcb` `pkg-config --libs xcb-glx`
 
 
 # This is now 0 by default since it seems to confuse the hell out of people
@@ -56,11 +51,11 @@ USING_EGL=0
 
 # Directories
 ifeq ($(USING_EGL), 1)
-SRC_DIRS = egl glx/x11 gallium mesa glu glut/glx glew glw
+SRC_DIRS = egl glx/x11 mesa glu glut/glx glw
 PROGRAM_DIRS = egl
 else
-SRC_DIRS = glx/x11 gallium mesa glu glut/glx glew glw
-PROGRAM_DIRS = xdemos
+SRC_DIRS = glx/x11 mesa glu glut/glx glw
+PROGRAM_DIRS =
 endif
 
 DRIVER_DIRS = dri
@@ -68,5 +63,5 @@ WINDOW_SYSTEM=dri
 
 # gamma are missing because they have not been converted to use the new
 # interface.
-DRI_DIRS = i810 i915 mach64 mga r128 r200 r300 radeon \
-	savage sis tdfx unichrome ffb 
+DRI_DIRS = i810 i915 mach64 mga r128 r200 r300 radeon s3v \
+	savage sis tdfx trident unichrome ffb

configs/linux-egl

@@ -1,65 +0,0 @@
-# -*-makefile-*-
-# Configuration for linux-dri: Linux DRI hardware drivers for XFree86 & others
-
-include $(TOP)/configs/default
-
-CONFIG_NAME = linux-dri
-
-# Compiler and flags
-CC = gcc
-CXX = g++
-
-#MKDEP = /usr/X11R6/bin/makedepend
-#MKDEP = gcc -M
-#MKDEP_OPTIONS = -MF depend
-
-OPT_FLAGS  = -O -g
-PIC_FLAGS  = -fPIC
-
-# Add '-DGLX_USE_TLS' to ARCH_FLAGS to enable TLS support.
-ARCH_FLAGS ?=
-
-DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
-	-D_BSD_SOURCE -D_GNU_SOURCE \
-	-DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 -DIN_DRI_DRIVER \
-	-DGLX_DIRECT_RENDERING -DGLX_INDIRECT_RENDERING \
-	-DHAVE_ALIAS -DHAVE_POSIX_MEMALIGN
-
-X11_INCLUDES = -I/usr/X11R6/include
-
-CFLAGS = -Wall -Wmissing-prototypes -std=c99 -ffast-math \
-	$(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) $(ASM_FLAGS)
-
-CXXFLAGS = -Wall $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
-
-
-MESA_ASM_SOURCES = 
-
-# Library/program dependencies
-EXTRA_LIB_PATH=-L/usr/X11R6/lib
-
-LIBDRM_CFLAGS = $(shell pkg-config --cflags libdrm)
-LIBDRM_LIB = $(shell pkg-config --libs libdrm)
-DRI_LIB_DEPS  = $(EXTRA_LIB_PATH) -lm -lpthread -lexpat -ldl $(LIBDRM_LIB)
-GL_LIB_DEPS   = $(EXTRA_LIB_PATH) -lX11 -lXext -lXxf86vm -lXdamage -lXfixes \
-		-lm -lpthread -ldl \
-                $(LIBDRM_LIB)
-
-
-# This is now 0 by default since it seems to confuse the hell out of people
-# and generate a lot of extra noise on bugzilla.  If you need to build with
-# EGL, do 'make linux-dri USING_EGL=1'
-
-USING_EGL=0
-
-# Directories
-SRC_DIRS = gallium mesa gallium/winsys glu egl
-PROGRAM_DIRS = egl
-
-DRIVER_DIRS = dri
-WINDOW_SYSTEM = dri
-GALLIUM_WINSYS_DIRS = egl_drm
-
-# gamma are missing because they have not been converted to use the new
-# interface.
-DRI_DIRS = intel 

configs/linux-fbdev

@@ -3,17 +3,8 @@
 include $(TOP)/configs/linux
 
 CONFIG_NAME = linux-fbdev
+DRIVER_DIRS = fbdev
 
-CFLAGS = -O3 -ffast-math -ansi -pedantic -fPIC -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DPTHREADS -DUSE_GLFBDEV_DRIVER
-
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-
-SRC_DIRS = gallium mesa glu glut/fbdev glew
-DRIVER_DIRS = fbdev osmesa
-PROGRAM_DIRS = fbdev demos redbook samples
-
-GL_LIB_DEPS = $(EXTRA_LIB_PATH) -lm -lpthread
-OSMESA_LIB_DEPS = -lm -lpthread
-GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) $(EXTRA_LIB_PATH) -lgpm -lm
+CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS -DUSE_GLFBDEV_DRIVER
 
+PROGRAM_DIRS = fbdev

configs/linux-glide

@@ -12,9 +12,6 @@ CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE
 CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
 GLUT_CFLAGS = -fexceptions
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
 
 # Library/program dependencies
 GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -L/usr/local/glide/lib -lglide3x -lm -lpthread

configs/linux-icc

@@ -16,7 +16,7 @@ GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread
 GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
 APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm
 
-MESA_ASM_SOURCES = $(X86_SOURCES)
-GLAPI_ASM_SOURCES = $(X86_API)
+ASM_SOURCES = $(X86_SOURCES)
+ASM_API = $(X86_API)
 
 

configs/linux-icc-static

@@ -23,5 +23,5 @@ GL_LIB_DEPS =
 GLUT_LIB_DEPS =
 APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm -lpthread -lcxa -lunwind
 
-MESA_ASM_SOURCES = $(X86_SOURCES)
-GLAPI_ASM_SOURCES = $(X86_API)
+ASM_SOURCES = $(X86_SOURCES)
+ASM_API = $(X86_API)

configs/linux-indirect

@@ -23,8 +23,7 @@ ARCH_FLAGS ?=
 
 DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
 	-D_BSD_SOURCE -D_GNU_SOURCE \
-	-DGLX_INDIRECT_RENDERING \
-	-DPTHREADS -DHAVE_ALIAS -DHAVE_POSIX_MEMALIGN
+	-DPTHREADS -DHAVE_ALIAS
 
 X11_INCLUDES = -I/usr/X11R6/include
 
@@ -33,11 +32,8 @@ CFLAGS   = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \
 
 CXXFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
 
-MESA_ASM_SOURCES = 
+ASM_SOURCES = 
 
 # Library/program dependencies
 EXTRA_LIB_PATH=-L/usr/X11R6/lib
@@ -47,7 +43,7 @@ GL_LIB_DEPS   = $(EXTRA_LIB_PATH) -lX11 -lXext -lXxf86vm -lm -lpthread -ldl
 
 
 # Directories
-SRC_DIRS = glx/x11 glu glut/glx glew glw
+SRC_DIRS = glx/x11 glu glut/glx glw
 DRIVER_DIRS =
 PROGRAM_DIRS = 
 WINDOW_SYSTEM=dri

configs/linux-llvm

@@ -1,42 +0,0 @@
-# -*-makefile-*-
-# Configuration for Linux and LLVM with debugging info
-# Builds the llvmpipe gallium driver
-
-include $(TOP)/configs/linux
-
-CONFIG_NAME = linux-llvm
-
-#GALLIUM_AUXILIARY_DIRS += gallivm
-
-# Add llvmpipe driver
-GALLIUM_DRIVERS_DIRS += llvmpipe
-
-OPT_FLAGS = -g -ansi -pedantic
-DEFINES += -DDEBUG -DDEBUG_MATH -DGALLIUM_LLVMPIPE -DHAVE_UDIS86
-
-# override -std=c99
-CFLAGS += -std=gnu99
-
-LLVM_VERSION := $(shell llvm-config --version)
-
-ifeq ($(LLVM_VERSION),)
-  $(warning Could not find LLVM! Make Sure 'llvm-config' is in the path)
-  MESA_LLVM=0
-else
-  MESA_LLVM=1
-#  $(info Using LLVM version: $(LLVM_VERSION))
-endif
-
-ifeq ($(MESA_LLVM),1)
-#  LLVM_CFLAGS=`llvm-config --cflags`
-  LLVM_CXXFLAGS=`llvm-config --cxxflags backend bitreader engine ipo interpreter instrumentation` -Wno-long-long
-  LLVM_LDFLAGS = $(shell llvm-config --ldflags backend bitreader engine ipo interpreter instrumentation)
-  LLVM_LIBS = $(shell llvm-config --libs backend bitreader engine ipo interpreter instrumentation)
-  MKLIB_OPTIONS=-cplusplus
-else
-  LLVM_CFLAGS=
-  LLVM_CXXFLAGS=
-endif
-
-LD = g++
-GL_LIB_DEPS = $(LLVM_LDFLAGS) $(LLVM_LIBS) $(EXTRA_LIB_PATH) -lX11 -lXext -lm -lpthread -lstdc++ -ludis86

configs/linux-osmesa

@@ -12,12 +12,9 @@ CXX = g++
 CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DPTHREADS
 CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
 
 # Directories
-SRC_DIRS = gallium mesa glu
+SRC_DIRS = mesa glu
 DRIVER_DIRS = osmesa
 PROGRAM_DIRS = osdemos
 
@@ -25,4 +22,4 @@ PROGRAM_DIRS = osdemos
 # Dependencies
 OSMESA_LIB_DEPS = -lm -lpthread
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
-APP_LIB_DEPS = -lm -lpthread
+APP_LIB_DEPS = -lOSMesa -lGLU

configs/linux-osmesa-static

@@ -1,37 +0,0 @@
-# Configuration for building static libOSMesa.a on Linux, no Xlib driver
-# This doesn't really have any Linux dependencies, so it should be usable
-# on other (gcc-based) systems.
-
-include $(TOP)/configs/default
-
-CONFIG_NAME = linux-osmesa
-
-# Compiler and flags
-CC = gcc -m32
-CXX = g++ -m32
-CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DPTHREADS
-CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
-
-MKLIB_OPTIONS = -static
-
-# Library names (actual file names)
-GL_LIB_NAME = libGL.a
-GLU_LIB_NAME = libGLU.a
-GLUT_LIB_NAME = libglut.a
-GLW_LIB_NAME = libGLw.a
-OSMESA_LIB_NAME = libOSMesa.a
-
-# Directories
-SRC_DIRS = mesa glu
-DRIVER_DIRS = osmesa
-PROGRAM_DIRS = osdemos
-
-
-# Dependencies
-GL_LIB_DEPS =
-OSMESA_LIB_DEPS =
-GLU_LIB_DEPS =
-GLUT_LIB_DEPS =
-GLW_LIB_DEPS =
-APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) \
-               $(EXTRA_LIB_PATH) -lX11 -lXmu -lXt -lXi -lpthread -lstdc++ -lm

configs/linux-osmesa16

@@ -10,9 +10,6 @@ CXX = g++
 CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS -I/usr/X11R6/include -DCHAN_BITS=16 -DDEFAULT_SOFTWARE_DEPTH_BITS=31
 CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
 
 # Library names
 OSMESA_LIB = OSMesa16
@@ -20,7 +17,7 @@ OSMESA_LIB_NAME = libOSMesa16.so
 
 
 # Directories
-SRC_DIRS = gallium mesa glu
+SRC_DIRS = mesa glu
 DRIVER_DIRS = osmesa
 PROGRAM_DIRS = 
 
@@ -28,4 +25,4 @@ PROGRAM_DIRS =
 # Dependencies
 OSMESA_LIB_DEPS = -lm -lpthread
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
-APP_LIB_DEPS = -lm -lpthread
+APP_LIB_DEPS = -lOSMesa16

configs/linux-osmesa16-static

@@ -10,11 +10,7 @@ CXX = g++
 CFLAGS = -O3 -ansi -pedantic -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS -I/usr/X11R6/include -DCHAN_BITS=16 -DDEFAULT_SOFTWARE_DEPTH_BITS=31
 CXXFLAGS = -O3 -ansi -pedantic -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
 MKLIB_OPTIONS = -static
-PIC_FLAGS =
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
 
 # Library names
 OSMESA_LIB = OSMesa16
@@ -22,11 +18,11 @@ OSMESA_LIB_NAME = libOSMesa16.a
 
 
 # Directories
-SRC_DIRS = gallium mesa glu
+SRC_DIRS = mesa glu
 DRIVER_DIRS = osmesa
 PROGRAM_DIRS = 
 
 
 # Dependencies
 OSMESA_LIB_DEPS = -lm -lpthread
-APP_LIB_DEPS = -lm -lpthread
+APP_LIB_DEPS = -lOSMesa16

configs/linux-osmesa32

@@ -10,9 +10,6 @@ CXX = g++
 CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS -I/usr/X11R6/include -DCHAN_BITS=32 -DDEFAULT_SOFTWARE_DEPTH_BITS=31
 CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
 
 # Library names
 OSMESA_LIB = OSMesa32
@@ -20,7 +17,7 @@ OSMESA_LIB_NAME = libOSMesa32.so
 
 
 # Directories
-SRC_DIRS = gallium mesa glu
+SRC_DIRS = mesa glu
 DRIVER_DIRS = osmesa
 PROGRAM_DIRS = 
 
@@ -28,4 +25,4 @@ PROGRAM_DIRS =
 # Dependencies
 OSMESA_LIB_DEPS = -lm -lpthread
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
-APP_LIB_DEPS = -lm -lpthread
+APP_LIB_DEPS = -lOSMesa32

configs/linux-ppc-static

@@ -5,7 +5,6 @@ include $(TOP)/configs/linux-ppc
 CONFIG_NAME = linux-ppc-static
 
 MKLIB_OPTIONS = -static
-PIC_FLAGS =
 
 # Library names (actual file names)
 GL_LIB_NAME = libGL.a

configs/linux-profile

@@ -1,8 +1,29 @@
 # Configuration for profiling on Linux with gprof
 
-include $(TOP)/configs/linux-static
+include $(TOP)/configs/default
 
 CONFIG_NAME = linux-profile
 
-OPT_FLAGS = -pg -g -O2
-DEFINES += -DNDEBUG
+# Compiler and flags
+CC = gcc
+CXX = g++
+
+CFLAGS = -pg -O -ansi -pedantic -Wall -Wmissing-prototypes -Wundef -fPIC -ffast-math -D_POSIX_SOURCE -D_SVID_SOURCE -D_BSD_SOURCE -I/usr/X11R6/include -DUSE_XSHM -DPTHREADS -DDEBUG
+
+CXXFLAGS = -pg -O -ansi -pedantic -Wall -Wundef -fPIC -ffast-math -D_POSIX_SOURCE -D_SVID_SOURCE -D_BSD_SOURCE -DDEBUG
+
+GLUT_CFLAGS = -fexceptions
+
+# Need to have -L/usr/X11R6/lib in these:
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
+GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lXt -L/usr/X11R6/lib -lX11
+
+# Need to make static libs for profiling:
+MKLIB_OPTIONS = -static
+GL_LIB_NAME = lib$(GL_LIB).a
+GLU_LIB_NAME = lib$(GLU_LIB).a
+GLUT_LIB_NAME = lib$(GLUT_LIB).a
+GLW_LIB_NAME = lib$(GLW_LIB).a
+OSMESA_LIB_NAME = lib$(OSMesa).a
+APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm -lpthread

configs/linux-solo

@@ -15,40 +15,29 @@ PIC_FLAGS  = -fPIC
 # Add '-DGLX_USE_TLS' to ARCH_FLAGS to enable TLS support.
 ARCH_FLAGS ?=
 
-# DRM and pciaccess
-LIBDRM_CFLAGS = $(shell pkg-config --cflags libdrm)
-LIBDRM_LIB = $(shell pkg-config --libs libdrm)
-PCIACCESS_CFLAGS = $(shell pkg-config --cflags pciaccess)
-PCIACCESS_LIB = $(shell pkg-config --libs pciaccess)
-
-
 DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
-	-D_BSD_SOURCE -D_GNU_SOURCE -DHAVE_POSIX_MEMALIGN \
-	-DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 -DIN_DRI_DRIVER \
-	-DHAVE_ALIAS
+	-D_BSD_SOURCE -D_GNU_SOURCE \
+	-DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 -DDRM_USE_MALLOC -DIN_DRI_DRIVER
 
 CFLAGS   = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \
 	$(ASM_FLAGS) -std=c99 -ffast-math 
 
 CXXFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
 
-MESA_ASM_SOURCES = 
+ASM_SOURCES = 
 
 # Library/program dependencies
-DRI_LIB_DEPS = -lm -lpthread -lexpat -ldl -L$(TOP)/$(LIB_DIR) $(PCIACCESS_LIB)
+DRI_LIB_DEPS = -lm -lpthread -lexpat -ldl -L$(TOP)/$(LIB_DIR) 
 GL_LIB_DEPS = -lm -lpthread -ldl
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lm
 GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -lm
 APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm -lpthread
 
 # Directories
-SRC_DIRS = glx/mini gallium mesa glu glut/mini glew
+SRC_DIRS = glx/mini mesa glu glut/mini
 DRIVER_DIRS = dri
 PROGRAM_DIRS = miniglx
 
-#DRI_DIRS = ffb gamma sis savage tdfx unichrome fb
-DRI_DIRS = i810 i915tex i915 mach64 mga r128 r200 radeon
+#DRI_DIRS = ffb gamma sis savage
+DRI_DIRS = i810 i915 mach64 mga r128 r200 radeon tdfx unichrome fb

configs/linux-solo-x86

@@ -5,6 +5,9 @@ include $(TOP)/configs/linux-solo
 
 CONFIG_NAME = linux-solo-x86
 
+# Unnecessary on x86, generally.
+PIC_FLAGS = 
+
 ASM_FLAGS = -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM
-MESA_ASM_SOURCES = $(X86_SOURCES)
-GLAPI_ASM_SOURCES = $(X86_API)
+ASM_SOURCES = $(X86_SOURCES)
+ASM_API = $(X86_API)

configs/linux-sparc

@@ -1,9 +1,30 @@
 # Configuration for Linux on Sparc
 
-include $(TOP)/configs/linux
+include $(TOP)/configs/default
 
 CONFIG_NAME = linux-sparc
 
-#ASM_FLAGS = -DUSE_SPARC_ASM
-#MESA_ASM_SOURCES = $(SPARC_SOURCES)
-#GLAPI_ASM_SOURCES = $(SPARC_API)
+# Compiler and flags
+CC = gcc
+CXX = g++
+
+WARN_FLAGS = -Wall
+OPT_FLAGS  = -O2
+PIC_FLAGS  = -fPIC
+
+DEFINES = -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM
+
+X11_INCLUDES = -I/usr/X11R6/include
+
+CFLAGS   = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \
+	$(ASM_FLAGS) -std=c99 -ffast-math 
+
+CXXFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
+
+GLUT_CFLAGS = -fexceptions
+
+EXTRA_LIB_PATH=-L/usr/X11R6/lib
+
+GL_LIB_DEPS = $(EXTRA_LIB_PATH) -lX11 -lXext -lm -lpthread
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) $(EXTRA_LIB_PATH) -lX11 -lXmu -lXt -lXi -lm
+GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) $(EXTRA_LIB_PATH) -lXt -lX11

configs/linux-sparc5

@@ -1,7 +1,17 @@
 # Configuration for Linux on Sparc5
 
-include $(TOP)/configs/linux-sparc
+include $(TOP)/configs/default
 
 CONFIG_NAME = linux-sparc5
 
-ARCH_FLAGS += -mcpu=ultrasparc
+# Compiler and flags
+CC = gcc
+CXX = g++
+CFLAGS = -mcpu=ultrasparc -O2 -ffast-math -ansi -pedantic -fPIC -D_SVID_SOURCE -D_BSD_SOURCE -I/usr/X11R6/include -DUSE_XSHM
+CXXFLAGS = -mcpu=ultrasparc -O2 -ffast-math -ansi -pedantic -fPIC -D_SVID_SOURCE -D_BSD_SOURCE
+GLUT_CFLAGS = -fexceptions
+
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
+GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -L/usr/X11R6/lib -lXt -lX11
+

configs/linux-static

@@ -5,7 +5,6 @@ include $(TOP)/configs/linux
 CONFIG_NAME = linux-static
 
 MKLIB_OPTIONS = -static
-PIC_FLAGS =
 
 # Library names (actual file names)
 GL_LIB_NAME = libGL.a
@@ -20,7 +19,3 @@ OSMESA_LIB_DEPS =
 GLU_LIB_DEPS = 
 GLUT_LIB_DEPS = 
 GLW_LIB_DEPS = 
-
-# Need to specify all libraries we may need
-APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) \
-	-l$(GL_LIB) -lm -L/usr/X11R6/lib/ -lX11 -lXext -lXmu -lXi -lpthread

configs/linux-ultrasparc

@@ -1,7 +1,17 @@
 # Configuration for Linux on UltraSparc
 
-include $(TOP)/configs/linux-sparc
+include $(TOP)/configs/default
 
 CONFIG_NAME = linux-ultrasparc
 
-ARCH_FLAGS += -mv8 -mtune=ultrasparc
+# Compiler and flags
+CC = gcc
+CXX = g++
+CFLAGS = -mv8 -O2 -mtune=ultrasparc -ansi -pedantic -fPIC -D_SVID_SOURCE -D_BSD_SOURCE -I/usr/X11R6/include -DUSE_XSHM
+CXXFLAGS = -mv8 -O2 -mtune=ultrasparc -ansi -pedantic -fPIC -D_SVID_SOURCE -D_BSD_SOURCE
+GLUT_CFLAGS = -fexceptions
+
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
+GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -L/usr/X11R6/lib -lXt -lX11
+APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR)-l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm

configs/linux-x86

@@ -4,8 +4,6 @@ include $(TOP)/configs/linux
 
 CONFIG_NAME = linux-x86
 
-ARCH_FLAGS = -m32 -mmmx -msse -msse2
-
 ASM_FLAGS = -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM
-MESA_ASM_SOURCES = $(X86_SOURCES)
-GLAPI_ASM_SOURCES = $(X86_API)
+ASM_SOURCES = $(X86_SOURCES)
+ASM_API = $(X86_API)

configs/linux-x86-64

@@ -6,8 +6,8 @@ CONFIG_NAME = linux-x86-64
 
 ARCH_FLAGS = -m64
 
-MESA_ASM_SOURCES = $(X86-64_SOURCES)
-GLAPI_ASM_SOURCES = $(X86-64_API)
+ASM_SOURCES = $(X86-64_SOURCES)
+ASM_API = $(X86-64_API)
 ASM_FLAGS = -DUSE_X86_64_ASM
 
 LIB_DIR = lib64

configs/linux-x86-64-debug

@@ -4,5 +4,4 @@ include $(TOP)/configs/linux-x86-64
 
 CONFIG_NAME = linux-x86-64-debug
 
-OPT_FLAGS = -g
 DEFINES += -DDEBUG -DDEBUG_MATH

configs/linux-x86-64-profile

@@ -1,8 +0,0 @@
-# Configuration for profiling on Linux for 64-bit X86 (Opteron) with gprof
-
-include $(TOP)/configs/linux-x86-64-static
-
-CONFIG_NAME = linux-x86-64-profile
-
-OPT_FLAGS = -pg -g -O2
-DEFINES += -DNDEBUG

configs/linux-x86-64-static

@@ -5,7 +5,6 @@ include $(TOP)/configs/linux-x86-64
 CONFIG_NAME = linux-x86-64-static
 
 MKLIB_OPTIONS = -static
-PIC_FLAGS =
 
 # Library names (actual file names)
 GL_LIB_NAME = libGL.a
@@ -20,8 +19,5 @@ OSMESA_LIB_DEPS =
 GLU_LIB_DEPS = 
 GLUT_LIB_DEPS = 
 GLW_LIB_DEPS = 
-
-# Need to specify all libraries we may need
-APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -Wl,--start-group \
-               -l$(GL_LIB) $(TOP)/src/mesa/pipe/softpipe/libsoftpipe.a -Wl,--end-group \
-               $(EXTRA_LIB_PATH) -lX11 -lXext -lXmu -lXt -lXi -lpthread -lstdc++ -lm
+APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) \
+               $(EXTRA_LIB_PATH) -lX11 -lXmu -lXt -lXi -lpthread -lstdc++ -lm

configs/linux-x86-glide

@@ -14,12 +14,9 @@ CXXFLAGS = -Wall -O3 -ansi -pedantic -fPIC -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199
 
 GLUT_CFLAGS = -fexceptions
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
 
-MESA_ASM_SOURCES = $(X86_SOURCES)
-GLAPI_ASM_SOURCES = $(X86_API)
+ASM_SOURCES = $(X86_SOURCES)
+ASM_API = $(X86_API)
 
 # Library/program dependencies
 GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -L/usr/local/glide/lib -lglide3x -lm -lpthread

configs/linux-x86-profile

@@ -1,8 +0,0 @@
-# Configuration for profiling on Linux with x86 optimizations with gprof
-
-include $(TOP)/configs/linux-x86-static
-
-CONFIG_NAME = linux-x86-profile
-
-OPT_FLAGS = -pg -g -O2
-DEFINES += -DNDEBUG

configs/linux-x86-static

@@ -5,7 +5,6 @@ include $(TOP)/configs/linux-x86
 CONFIG_NAME = linux-x86-static
 
 MKLIB_OPTIONS = -static
-PIC_FLAGS =
 
 # Library names (actual file names)
 GL_LIB_NAME = libGL.a
@@ -20,7 +19,5 @@ OSMESA_LIB_DEPS =
 GLU_LIB_DEPS = 
 GLUT_LIB_DEPS = 
 GLW_LIB_DEPS = 
-
-# Need to specify all libraries we may need
-APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) \
-	-l$(GL_LIB) $(EXTRA_LIB_PATH) -lX11 -lXext -lXmu -lXt -lXi -lpthread -lstdc++ -lm
+APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) \
+               $(EXTRA_LIB_PATH) -lX11 -lXmu -lXt -lXi -lpthread -lstdc++ -lm

configs/netbsd

@@ -12,6 +12,3 @@ CXXFLAGS = -O2 -fPIC
 GLUT_CFLAGS = -fexceptions
 APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/X11R6/lib -lXext -lXmu -lXi -lX11 -lm
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing

configs/openbsd

@@ -10,10 +10,6 @@ CXX = g++
 CFLAGS = -O2 -fPIC -I/usr/X11R6/include -DUSE_XSHM -DHZ=100
 CXXFLAGS = -O2 -fPIC -I/usr/X11R6/include -DHZ=100
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm
 OSMESA_LIB_DEPS = -lm
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB)

configs/solaris-x86-gcc

@@ -11,10 +11,6 @@ CFLAGS = -O3 -march=i486 -fPIC -I/usr/openwin/include -DUSE_XSHM
 CXXFLAGS = -O3 -march=i486 -fPIC
 GLUT_CFLAGS = -fexceptions
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 GL_LIB_DEPS = -L/usr/openwin/lib -lX11 -lXext -lm -lpthread
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lm
 GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/openwin/lib -lX11 -lXmu -lXt -lXi -lm

configs/solaris-x86-gcc-static

@@ -12,10 +12,6 @@ CXXFLAGS = -O3 -march=i486 -fPIC
 GLUT_CFLAGS = -fexceptions
 MKLIB_OPTIONS = -static
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 GL_LIB_DEPS = -L/usr/openwin/lib -lX11 -lXext -lm -lpthread
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lm
 GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/openwin/lib -lX11 -lXmu -lXt -lXi -lm

configs/sunos4-gcc

@@ -11,9 +11,5 @@ CFLAGS = -fPIC -O3 -I/usr/openwin/include -I/usr/include/X11R5 -I/usr/include/X1
 CXXFLAGS = -fPIC -O3 -I/usr/openwin/include -DSUNOS4
 GLUT_CFLAGS = -fexceptions -DSOLARIS_2_4_BUG
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/openwin/lib -lX11 -lXext -lXmu -lXi -lm
 

configs/sunos5-gcc

@@ -16,8 +16,8 @@ ARCH_FLAGS ?=
 
 DEFINES = -D_REENTRANT -DUSE_XSHM
 
-MESA_ASM_SOURCES = $(SPARC_SOURCES)
-GLAPI_ASM_SOURCES = $(SPARC_API)
+ASM_SOURCES = $(SPARC_SOURCES)
+ASM_API = $(SPARC_API)
 ASM_FLAGS = -DUSE_SPARC_ASM
 
 CFLAGS   = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \
@@ -28,10 +28,6 @@ CXXFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \
 
 GLUT_CFLAGS = -fexceptions -DSOLARIS_2_4_BUG
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 # Library/program dependencies
 EXTRA_LIB_PATH=-L/usr/openwin/lib
 

configs/sunos5-v9-cc-g++

@@ -1,35 +0,0 @@
-# Configuration for SunOS 5, SPARC V9 and cc/g++ (for C and C++ sources)
-
-include $(TOP)/configs/default
-
-CONFIG_NAME = sunos5-v9-cc-g++
-
-MKLIB_OPTIONS = -cplusplus
-
-LIB_DIR = lib64
-
-# Compiler and flags
-CC = cc
-CXX = g++
-
-CXX_WARN_FLAGS = -Wall
-CXX_PIC_FLAGS  = -fPIC
-CXX_OPT_FLAGS  = -O3 -m64 -mcpu=ultrasparc -mv8plus -mvis -g -fomit-frame-pointer -pipe
-CXX_ARCH_FLAGS = -m64
-
-
-CXXFLAGS = $(CXX_WARN_FLAGS) $(CXX_OPT_FLAGS) $(CXX_PIC_FLAGS) $(CXX_ARCH_FLAGS) $(DEFINES) \
-        -I/usr/openwin/include
-
-# Work around aliasing bugs - developers should comment this out
-CXXFLAGS += -fno-strict-aliasing
-
-CFLAGS = -xarch=v9 -KPIC -O -I/usr/openwin/include -I/usr/dt/include -DUSE_XSHM -DPTHREADS
-#CXXFLAGS = -xarch=v9 -KPIC -O -I/usr/openwin/include -I/usr/dt/include -DPTHREADS
-GLUT_CFLAGS = -DSOLARIS_2_4_BUG
-
-GL_LIB_DEPS = -L/usr/openwin/lib -L/usr/dt/lib -lX11 -lXext -lXmu -lXi -lm -lpthread
-GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lm -lCstd -lCrun
-GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -lm
-GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -L/usr/openwin/lib -lXt -lX11
-APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -lX11 -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm