Use the BATCH_SZ macro where appropriate.

Bump driver date.

.gitattributes

@@ -1,4 +0,0 @@
-*.dsp -crlf
-*.dsw -crlf
-*.sln -crlf
-*.vcproj -crlf

.gitignore

@@ -1,16 +0,0 @@
-*.a
-*.o
-*.so
-*.sw[a-z]
-*.pc
-*~
-depend
-depend.bak
-lib
-lib64
-configure
-autom4te.cache
-aclocal.m4
-config.log
-config.status
-cscope*

Makefile

@@ -7,61 +7,48 @@ SUBDIRS = src progs
 
 default: $(TOP)/configs/current
 	@for dir in $(SUBDIRS) ; do \
-		if [ -d $$dir ] ; then \
-			(cd $$dir && $(MAKE)) || exit 1 ; \
-		fi \
+		(cd $$dir ; $(MAKE)) || exit 1 ; \
 	done
 
 
 doxygen:
-	cd doxygen && $(MAKE)
+	(cd doxygen ; make) ; \
 
 clean:
-	-@touch $(TOP)/configs/current
-	-@for dir in $(SUBDIRS) ; do \
-		if [ -d $$dir ] ; then \
-			(cd $$dir && $(MAKE) clean) ; \
-		fi \
+	@for dir in $(SUBDIRS) ; do \
+		(cd $$dir ; $(MAKE) clean) ; \
 	done
-	-@test -s $(TOP)/configs/current || rm -f $(TOP)/configs/current
 
 
-realclean: clean
+realclean:
+	touch $(TOP)/configs/current
+	$(MAKE) clean
 	-rm -rf lib*
 	-rm -f $(TOP)/configs/current
-	-rm -f $(TOP)/configs/autoconf
-	-rm -rf autom4te.cache
-	-find . '(' -name '*.o' -o -name '*.a' -o -name '*.so' -o \
-	  -name depend -o -name depend.bak ')' -exec rm -f '{}' ';'
+	-rm -f `find . -name \*.o`
+	-rm -f `find . -name \*.a`
+	-rm -f `find . -name \*.so`
+	-rm -f `find . -name depend`
 
 
 
 install:
 	@for dir in $(SUBDIRS) ; do \
-		if [ -d $$dir ] ; then \
-			(cd $$dir && $(MAKE) install) || exit 1 ; \
-		fi \
+		(cd $$dir ; $(MAKE) install) || exit 1 ; \
 	done
 
-
 # DirectFBGL module installation
 linux-directfb-install:
 	cd src/mesa/drivers/directfb && $(MAKE) install
 
-.PHONY: default doxygen clean realclean install linux-directfb-install
-
 # If there's no current configuration file
 $(TOP)/configs/current:
 	@echo
 	@echo
 	@echo "Please choose a configuration from the following list:"
-	@ls -1 $(TOP)/configs | grep -v "current\|default\|CVS\|autoconf.*"
+	@ls -1 $(TOP)/configs | grep -v "current\|default\|CVS"
 	@echo
 	@echo "Then type 'make <config>' (ex: 'make linux-x86')"
-	@echo
-	@echo "Or, run './configure' then 'make'"
-	@echo "See './configure --help' for details"
-	@echo
 	@echo "(ignore the following error message)"
 	@exit 1
 
@@ -72,16 +59,11 @@ aix-64 \
 aix-64-static \
 aix-gcc \
 aix-static \
-autoconf \
-bluegene-osmesa \
-bluegene-xlc-osmesa \
 beos \
-catamount-osmesa-pgi \
 darwin \
-darwin-fat-32bit \
-darwin-fat-all \
 darwin-static \
 darwin-static-x86ppc \
+darwin-x86ppc \
 freebsd \
 freebsd-dri \
 freebsd-dri-amd64 \
@@ -110,7 +92,6 @@ linux-alpha-static \
 linux-debug \
 linux-directfb \
 linux-dri \
-linux-dri-debug \
 linux-dri-x86 \
 linux-dri-x86-64 \
 linux-dri-ppc \
@@ -162,46 +143,35 @@ sunos5-v8 \
 sunos5-v8-static \
 sunos5-v9 \
 sunos5-v9-static \
-sunos5-v9-cc-g++ \
 ultrix-gcc:
-	@ if test -f configs/current || test -L configs/current ; then \
-		echo "Please run 'make realclean' before changing configs" ; \
-		exit 1 ; \
-	fi
 	(cd configs && rm -f current && ln -s $@ current)
 	$(MAKE) default
 
 
 # Rules for making release tarballs
 
-DIRECTORY = Mesa-7.2
-LIB_NAME = MesaLib-7.2
-DEMO_NAME = MesaDemos-7.2
-GLUT_NAME = MesaGLUT-7.2
+DIRECTORY = Mesa-6.5.1
+LIB_NAME = MesaLib-6.5.1
+DEMO_NAME = MesaDemos-6.5.1
+GLUT_NAME = MesaGLUT-6.5.1
 
 MAIN_FILES = \
 	$(DIRECTORY)/Makefile*						\
-	$(DIRECTORY)/configure						\
-	$(DIRECTORY)/configure.ac					\
-	$(DIRECTORY)/acinclude.m4					\
-	$(DIRECTORY)/aclocal.m4						\
 	$(DIRECTORY)/descrip.mms					\
 	$(DIRECTORY)/mms-config.					\
-	$(DIRECTORY)/bin/config.guess					\
-	$(DIRECTORY)/bin/config.sub					\
-	$(DIRECTORY)/bin/install-sh					\
 	$(DIRECTORY)/bin/mklib						\
-	$(DIRECTORY)/bin/minstall					\
-	$(DIRECTORY)/bin/version.mk					\
+	$(DIRECTORY)/bin/installmesa					\
 	$(DIRECTORY)/configs/[a-z]*					\
 	$(DIRECTORY)/docs/*.html					\
 	$(DIRECTORY)/docs/COPYING					\
 	$(DIRECTORY)/docs/README.*					\
 	$(DIRECTORY)/docs/RELNOTES*					\
+	$(DIRECTORY)/docs/VERSIONS					\
 	$(DIRECTORY)/docs/*.spec					\
 	$(DIRECTORY)/include/GL/internal/glcore.h			\
 	$(DIRECTORY)/include/GL/amesa.h					\
 	$(DIRECTORY)/include/GL/dmesa.h					\
+	$(DIRECTORY)/include/GL/directfbgl.h				\
 	$(DIRECTORY)/include/GL/fxmesa.h				\
 	$(DIRECTORY)/include/GL/ggimesa.h				\
 	$(DIRECTORY)/include/GL/gl.h					\
@@ -229,12 +199,13 @@ MAIN_FILES = \
 	$(DIRECTORY)/src/mesa/Makefile*					\
 	$(DIRECTORY)/src/mesa/sources					\
 	$(DIRECTORY)/src/mesa/descrip.mms				\
-	$(DIRECTORY)/src/mesa/gl.pc.in					\
 	$(DIRECTORY)/src/mesa/depend					\
 	$(DIRECTORY)/src/mesa/main/*.[chS]				\
 	$(DIRECTORY)/src/mesa/main/descrip.mms				\
 	$(DIRECTORY)/src/mesa/glapi/*.[chS]				\
 	$(DIRECTORY)/src/mesa/glapi/descrip.mms				\
+	$(DIRECTORY)/src/mesa/array_cache/*.[ch]			\
+	$(DIRECTORY)/src/mesa/array_cache/descrip.mms			\
 	$(DIRECTORY)/src/mesa/math/*.[ch]				\
 	$(DIRECTORY)/src/mesa/math/descrip.mms				\
 	$(DIRECTORY)/src/mesa/shader/*.[ch]				\
@@ -244,21 +215,15 @@ MAIN_FILES = \
 	$(DIRECTORY)/src/mesa/shader/slang/*.[ch]			\
 	$(DIRECTORY)/src/mesa/shader/slang/descrip.mms			\
 	$(DIRECTORY)/src/mesa/shader/slang/library/*.[ch]		\
-	$(DIRECTORY)/src/mesa/shader/slang/library/*.gc			\
-	$(DIRECTORY)/src/mesa/shader/slang/library/*.syn		\
-	$(DIRECTORY)/src/mesa/shader/slang/library/Makefile		\
 	$(DIRECTORY)/src/mesa/swrast/*.[ch]				\
 	$(DIRECTORY)/src/mesa/swrast/descrip.mms			\
 	$(DIRECTORY)/src/mesa/swrast_setup/*.[ch]			\
 	$(DIRECTORY)/src/mesa/swrast_setup/descrip.mms			\
-	$(DIRECTORY)/src/mesa/vbo/*.[chS]				\
-	$(DIRECTORY)/src/mesa/vbo/descrip.mms				\
 	$(DIRECTORY)/src/mesa/tnl/*.[chS]				\
 	$(DIRECTORY)/src/mesa/tnl/descrip.mms				\
 	$(DIRECTORY)/src/mesa/tnl_dd/*.[ch]				\
 	$(DIRECTORY)/src/mesa/tnl_dd/imm/*.[ch]				\
 	$(DIRECTORY)/src/mesa/tnl_dd/imm/NOTES.imm			\
-	$(DIRECTORY)/src/mesa/drivers/Makefile				\
 	$(DIRECTORY)/src/mesa/drivers/beos/*.cpp			\
 	$(DIRECTORY)/src/mesa/drivers/beos/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/common/*.[ch]			\
@@ -266,7 +231,6 @@ MAIN_FILES = \
 	$(DIRECTORY)/src/mesa/drivers/directfb/*.[ch]			\
 	$(DIRECTORY)/src/mesa/drivers/directfb/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/dos/*.[chS]			\
-	$(DIRECTORY)/src/mesa/drivers/fbdev/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/fbdev/glfbdev.c			\
 	$(DIRECTORY)/src/mesa/drivers/glide/*.[ch]			\
 	$(DIRECTORY)/src/mesa/drivers/ggi/*.[ch]			\
@@ -276,7 +240,6 @@ MAIN_FILES = \
 	$(DIRECTORY)/src/mesa/drivers/ggi/display/*.c			\
 	$(DIRECTORY)/src/mesa/drivers/ggi/display/fbdev.conf.in		\
 	$(DIRECTORY)/src/mesa/drivers/ggi/include/ggi/mesa/*.h		\
-	$(DIRECTORY)/src/mesa/drivers/osmesa/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/osmesa/Makefile.win		\
 	$(DIRECTORY)/src/mesa/drivers/osmesa/descrip.mms		\
 	$(DIRECTORY)/src/mesa/drivers/osmesa/osmesa.def			\
@@ -284,7 +247,6 @@ MAIN_FILES = \
 	$(DIRECTORY)/src/mesa/drivers/svga/*.[ch]			\
 	$(DIRECTORY)/src/mesa/drivers/windows/*/*.[ch]			\
 	$(DIRECTORY)/src/mesa/drivers/windows/*/*.def			\
-	$(DIRECTORY)/src/mesa/drivers/x11/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/x11/descrip.mms			\
 	$(DIRECTORY)/src/mesa/drivers/x11/*.[ch]			\
 	$(DIRECTORY)/src/mesa/ppc/*.[ch]				\
@@ -302,26 +264,26 @@ MAIN_FILES = \
 	$(DIRECTORY)/vms/analyze_map.com				\
 	$(DIRECTORY)/vms/xlib.opt					\
 	$(DIRECTORY)/vms/xlib_share.opt					\
-	$(DIRECTORY)/windows/VC8/mesa/mesa.sln				\
-	$(DIRECTORY)/windows/VC8/mesa/gdi/gdi.vcproj			\
-	$(DIRECTORY)/windows/VC8/mesa/glu/glu.vcproj			\
-	$(DIRECTORY)/windows/VC8/mesa/mesa/mesa.vcproj			\
-	$(DIRECTORY)/windows/VC8/mesa/osmesa/osmesa.vcproj		\
-	$(DIRECTORY)/windows/VC8/progs/progs.sln			\
-	$(DIRECTORY)/windows/VC8/progs/demos/gears.vcproj		\
-	$(DIRECTORY)/windows/VC8/progs/glut/glut.vcproj
-
+	$(DIRECTORY)/windows/VC6/mesa/gdi/gdi.dsp			\
+	$(DIRECTORY)/windows/VC6/mesa/glu/*.txt				\
+	$(DIRECTORY)/windows/VC6/mesa/glu/glu.dsp			\
+	$(DIRECTORY)/windows/VC6/mesa/mesa.dsw				\
+	$(DIRECTORY)/windows/VC6/mesa/mesa/mesa.dsp			\
+	$(DIRECTORY)/windows/VC6/mesa/osmesa/osmesa.dsp			\
+	$(DIRECTORY)/windows/VC7/mesa/gdi/gdi.vcproj			\
+	$(DIRECTORY)/windows/VC7/mesa/glu/glu.vcproj			\
+	$(DIRECTORY)/windows/VC7/mesa/mesa.sln				\
+	$(DIRECTORY)/windows/VC7/mesa/mesa/mesa.vcproj			\
+	$(DIRECTORY)/windows/VC7/mesa/osmesa/osmesa.vcproj
 
 DRI_FILES = \
 	$(DIRECTORY)/include/GL/internal/dri_interface.h		\
-	$(DIRECTORY)/include/GL/internal/dri_sarea.h			\
 	$(DIRECTORY)/include/GL/internal/sarea.h			\
 	$(DIRECTORY)/src/glx/Makefile					\
 	$(DIRECTORY)/src/glx/x11/Makefile				\
 	$(DIRECTORY)/src/glx/x11/*.[ch]					\
 	$(DIRECTORY)/src/mesa/drivers/dri/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/dri/Makefile.template		\
-	$(DIRECTORY)/src/mesa/drivers/dri/dri.pc.in			\
 	$(DIRECTORY)/src/mesa/drivers/dri/common/xmlpool/*.[ch]		\
 	$(DIRECTORY)/src/mesa/drivers/dri/common/xmlpool/*.po		\
 	$(DIRECTORY)/src/mesa/drivers/dri/*/*.[chS]			\
@@ -332,16 +294,12 @@ DRI_FILES = \
 SGI_GLU_FILES = \
 	$(DIRECTORY)/src/glu/Makefile					\
 	$(DIRECTORY)/src/glu/descrip.mms				\
-	$(DIRECTORY)/src/glu/glu.pc.in					\
 	$(DIRECTORY)/src/glu/sgi/Makefile				\
-	$(DIRECTORY)/src/glu/sgi/Makefile.mgw				\
 	$(DIRECTORY)/src/glu/sgi/Makefile.win				\
 	$(DIRECTORY)/src/glu/sgi/Makefile.DJ				\
 	$(DIRECTORY)/src/glu/sgi/glu.def				\
 	$(DIRECTORY)/src/glu/sgi/dummy.cc				\
 	$(DIRECTORY)/src/glu/sgi/descrip.mms				\
-	$(DIRECTORY)/src/glu/sgi/glu.exports				\
-	$(DIRECTORY)/src/glu/sgi/glu.exports.darwin			\
 	$(DIRECTORY)/src/glu/sgi/mesaglu.opt				\
 	$(DIRECTORY)/src/glu/sgi/include/gluos.h			\
 	$(DIRECTORY)/src/glu/sgi/libnurbs/interface/*.h			\
@@ -368,7 +326,6 @@ GLW_FILES = \
 	$(DIRECTORY)/src/glw/*.[ch]			\
 	$(DIRECTORY)/src/glw/Makefile*			\
 	$(DIRECTORY)/src/glw/README			\
-	$(DIRECTORY)/src/glw/glw.pc.in			\
 	$(DIRECTORY)/src/glw/depend
 
 DEMO_FILES = \
@@ -382,8 +339,6 @@ DEMO_FILES = \
 	$(DIRECTORY)/progs/demos/*.cxx			\
 	$(DIRECTORY)/progs/demos/*.dat			\
 	$(DIRECTORY)/progs/demos/README			\
-	$(DIRECTORY)/progs/fbdev/Makefile		\
-	$(DIRECTORY)/progs/fbdev/glfbdevtest.c		\
 	$(DIRECTORY)/progs/osdemos/Makefile		\
 	$(DIRECTORY)/progs/osdemos/*.c			\
 	$(DIRECTORY)/progs/xdemos/Makefile*		\
@@ -395,10 +350,6 @@ DEMO_FILES = \
 	$(DIRECTORY)/progs/samples/Makefile*		\
 	$(DIRECTORY)/progs/samples/README		\
 	$(DIRECTORY)/progs/samples/*.c			\
-	$(DIRECTORY)/progs/glsl/Makefile*		\
-	$(DIRECTORY)/progs/glsl/*.c			\
-	$(DIRECTORY)/progs/glsl/*.frag			\
-	$(DIRECTORY)/progs/glsl/*.vert			\
 	$(DIRECTORY)/progs/windml/Makefile.ugl		\
 	$(DIRECTORY)/progs/windml/*.c			\
 	$(DIRECTORY)/progs/windml/*.bmp			\
@@ -413,7 +364,6 @@ GLUT_FILES = \
 	$(DIRECTORY)/include/GL/glutf90.h		\
 	$(DIRECTORY)/src/glut/glx/Makefile*		\
 	$(DIRECTORY)/src/glut/glx/depend		\
-	$(DIRECTORY)/src/glut/glx/glut.pc.in		\
 	$(DIRECTORY)/src/glut/glx/*def			\
 	$(DIRECTORY)/src/glut/glx/descrip.mms		\
 	$(DIRECTORY)/src/glut/glx/mms_depend		\
@@ -427,12 +377,8 @@ GLUT_FILES = \
 	$(DIRECTORY)/src/glut/ggi/*.[ch]		\
 	$(DIRECTORY)/src/glut/ggi/Makefile		\
 	$(DIRECTORY)/src/glut/fbdev/Makefile		\
-	$(DIRECTORY)/src/glut/fbdev/*[ch]		\
-	$(DIRECTORY)/src/glut/mini/*[ch]		\
-	$(DIRECTORY)/src/glut/mini/glut.pc.in		\
-	$(DIRECTORY)/src/glut/directfb/Makefile		\
-	$(DIRECTORY)/src/glut/directfb/NOTES		\
-	$(DIRECTORY)/src/glut/directfb/*[ch]		\
+	$(DIRECTORY)/src/glut/fbdev/cursors.h		\
+	$(DIRECTORY)/src/glut/fbdev/glut_fbdev.c	\
 	$(DIRECTORY)/windows/VC6/progs/glut/glut.dsp	\
 	$(DIRECTORY)/windows/VC7/progs/glut/glut.vcproj
 
@@ -448,20 +394,9 @@ LIB_FILES = $(MAIN_FILES) $(DRI_FILES) $(SGI_GLU_FILES) $(GLW_FILES)
 
 
 # Everything for new a Mesa release:
-tarballs: rm_depend configure aclocal.m4 lib_gz demo_gz glut_gz \
-	lib_bz2 demo_bz2 glut_bz2 lib_zip demo_zip glut_zip md5
+tarballs: rm_depend lib_gz demo_gz glut_gz lib_bz2 demo_bz2 glut_bz2 lib_zip demo_zip glut_zip md5
 
 
-# Helper for autoconf builds
-ACLOCAL = aclocal
-ACLOCAL_FLAGS =
-AUTOCONF = autoconf
-AC_FLAGS =
-aclocal.m4: configure.ac acinclude.m4
-	$(ACLOCAL) $(ACLOCAL_FLAGS)
-configure: configure.ac aclocal.m4 acinclude.m4
-	$(AUTOCONF) $(AC_FLAGS)
-
 rm_depend:
 	@for dep in $(DEPEND_FILES) ; do \
 		rm -f $$dep ; \
@@ -470,7 +405,6 @@ rm_depend:
 
 lib_gz:
 	rm -f configs/current ; \
-	rm -f configs/autoconf ; \
 	cd .. ; \
 	tar -cf $(LIB_NAME).tar $(LIB_FILES) ; \
 	gzip $(LIB_NAME).tar ; \
@@ -490,7 +424,6 @@ glut_gz:
 
 lib_bz2:
 	rm -f configs/current ; \
-	rm -f configs/autoconf ; \
 	cd .. ; \
 	tar -cf $(LIB_NAME).tar $(LIB_FILES) ; \
 	bzip2 $(LIB_NAME).tar ; \
@@ -510,7 +443,6 @@ glut_bz2:
 
 lib_zip:
 	rm -f configs/current ; \
-	rm -f configs/autoconf ; \
 	rm -f $(LIB_NAME).zip ; \
 	cd .. ; \
 	zip -qr $(LIB_NAME).zip $(LIB_FILES) ; \
@@ -538,6 +470,3 @@ md5:
 	@-md5sum $(GLUT_NAME).tar.gz
 	@-md5sum $(GLUT_NAME).tar.bz2
 	@-md5sum $(GLUT_NAME).zip
-
-.PHONY: tarballs rm_depend lib_gz demo_gz glut_gz lib_bz2 demo_bz2 \
-	glut_bz2 lib_zip demo_zip glut_zip md5

Makefile.mgw

@@ -51,59 +51,37 @@
 #	realclean:	remove all generated files
 #
 
-# MinGW core makefile updated for Mesa 7.0
-#
-#  Updated : by Heromyth, on 2007-7-21
-#  Email   : zxpmyth@yahoo.com.cn
-#  Bugs    : 1) All the default settings work fine. But the setting X86=1 can't work. 
-#            The others havn't been tested yet.
-#            2) The generated DLLs are *not* compatible with the ones built
-#            with the other compilers like VC8, especially for GLUT. 
-#            3) MAlthough more tests are needed, it can be used individually!
 
 
 .PHONY : all libgl clean realclean
 
 ifeq ($(ICD),1)
   # when -std=c99 mingw will not define WIN32
-  CFLAGS = -Wall -Werror
+  CFLAGS = -Wall -W -Werror
 else
   # I love c89
-  CFLAGS = -Wall -pedantic
+  CFLAGS = -Wall -W -pedantic
 endif
 CFLAGS += -O2 -ffast-math
 
 export CFLAGS
 
-
 ifeq ($(wildcard $(addsuffix /rm.exe,$(subst ;, ,$(PATH)))),)
 UNLINK = del $(subst /,\,$(1))
 else
 UNLINK = $(RM) $(1)
 endif
 
-all: libgl libglu libglut example
+all: libgl
 
 libgl: lib
 	$(MAKE) -f Makefile.mgw -C src/mesa
 
-libglu: libgl
-	$(MAKE) -f Makefile.mgw -C src/glu/sgi
-
-libglut: libglu 
-	$(MAKE) -f Makefile.mgw -C src/glut/glx
-
-example: libglut 
-	$(MAKE) -f Makefile.mgw star -C progs/samples
-	copy progs\samples\star.exe lib
-
 lib:
 	mkdir lib
 
 clean:
 	$(MAKE) -f Makefile.mgw clean -C src/mesa
-	$(MAKE) -f Makefile.mgw clean -C src/glu/sgi
-	$(MAKE) -f Makefile.mgw clean -C src/glut/glx
 
 realclean: clean
 	-$(call UNLINK,lib/*.a)

acinclude.m4

@@ -1,119 +0,0 @@
-# A few convenience macros for Mesa, mostly to keep all the platform
-# specifics out of configure.ac.
-
-# MESA_PIC_FLAGS()
-#
-# Find out whether to build PIC code using the option --enable-pic and
-# the configure enable_static/enable_shared settings. If PIC is needed,
-# figure out the necessary flags for the platform and compiler.
-#
-# The platform checks have been shamelessly taken from libtool and
-# stripped down to just what's needed for Mesa. See _LT_COMPILER_PIC in
-# /usr/share/aclocal/libtool.m4 or
-# http://git.savannah.gnu.org/gitweb/?p=libtool.git;a=blob;f=libltdl/m4/libtool.m4;hb=HEAD
-#
-AC_DEFUN([MESA_PIC_FLAGS],
-[AC_REQUIRE([AC_PROG_CC])dnl
-AC_ARG_VAR([PIC_FLAGS], [compiler flags for PIC code])
-AC_ARG_ENABLE([pic],
-    [AS_HELP_STRING([--disable-pic],
-        [compile PIC objects @<:@default=enabled for shared builds
-        on supported platforms@:>@])],
-    [enable_pic="$enableval"
-    test "x$enable_pic" = x && enable_pic=auto],
-    [enable_pic=auto])
-# disable PIC by default for static builds
-if test "$enable_pic" = auto && test "$enable_static" = yes; then
-    enable_pic=no
-fi
-# if PIC hasn't been explicitly disabled, try to figure out the flags
-if test "$enable_pic" != no; then
-    AC_MSG_CHECKING([for $CC option to produce PIC])
-    # allow the user's flags to override
-    if test "x$PIC_FLAGS" = x; then
-        # see if we're using GCC
-        if test "x$GCC" = xyes; then
-            case "$host_os" in
-            aix*|beos*|cygwin*|irix5*|irix6*|osf3*|osf4*|osf5*)
-                # PIC is the default for these OSes.
-                ;;
-            mingw*|os2*|pw32*)
-                # This hack is so that the source file can tell whether
-                # it is being built for inclusion in a dll (and should
-                # export symbols for example).
-                PIC_FLAGS="-DDLL_EXPORT"
-                ;;
-            darwin*|rhapsody*)
-                # PIC is the default on this platform
-                # Common symbols not allowed in MH_DYLIB files
-                PIC_FLAGS="-fno-common"
-                ;;
-            hpux*)
-                # PIC is the default for IA64 HP-UX and 64-bit HP-UX,
-                # but not for PA HP-UX.
-                case $host_cpu in
-                hppa*64*|ia64*)
-                    ;;
-                *)
-                    PIC_FLAGS="-fPIC"
-                    ;;
-                esac
-                ;;
-            *)
-                # Everyone else on GCC uses -fPIC
-                PIC_FLAGS="-fPIC"
-                ;;
-            esac
-        else # !GCC
-            case "$host_os" in
-            hpux9*|hpux10*|hpux11*)
-                # PIC is the default for IA64 HP-UX and 64-bit HP-UX,
-                # but not for PA HP-UX.
-                case "$host_cpu" in
-                hppa*64*|ia64*)
-                    # +Z the default
-                    ;;
-                *)
-                    PIC_FLAGS="+Z"
-                    ;;
-                esac
-                ;;
-            linux*|k*bsd*-gnu)
-                case `basename "$CC"` in
-                icc*|ecc*|ifort*)
-                    PIC_FLAGS="-KPIC"
-                    ;;
-                pgcc*|pgf77*|pgf90*|pgf95*)
-                    # Portland Group compilers (*not* the Pentium gcc
-                    # compiler, which looks to be a dead project)
-                    PIC_FLAGS="-fpic"
-                    ;;
-                ccc*)
-                    # All Alpha code is PIC.
-                    ;;
-                xl*)
-                    # IBM XL C 8.0/Fortran 10.1 on PPC
-                    PIC_FLAGS="-qpic"
-                    ;;
-                *)
-                    case `$CC -V 2>&1 | sed 5q` in
-                    *Sun\ C*|*Sun\ F*)
-                        # Sun C 5.9 or Sun Fortran
-                        PIC_FLAGS="-KPIC"
-                        ;;
-                    esac
-                esac
-                ;;
-            solaris*)
-                PIC_FLAGS="-KPIC"
-                ;;
-            sunos4*)
-                PIC_FLAGS="-PIC"
-                ;;
-            esac
-        fi # GCC
-    fi # PIC_FLAGS
-    AC_MSG_RESULT([$PIC_FLAGS])
-fi
-AC_SUBST([PIC_FLAGS])
-])# MESA_PIC_FLAGS

autogen.sh

@@ -1,16 +0,0 @@
-#! /bin/sh
-
-srcdir=`dirname "$0"`
-test -z "$srcdir" && srcdir=.
-
-SRCDIR=`(cd "$srcdir" && pwd)`
-ORIGDIR=`pwd`
-
-if test "x$SRCDIR" != "x$ORIGDIR"; then
-	echo "Mesa cannot be built when srcdir != builddir" 1>&2
-	exit 1
-fi
-
-autoreconf -v --install || exit 1
-
-"$srcdir"/configure "$@"

bin/confdiff.sh

@@ -1,48 +0,0 @@
-#!/bin/bash -e
-
-usage()
-{
-	echo "Usage: $0 <target1> <target2>"
-	echo "Highlight differences between Mesa configs"
-	echo "Example:"
-	echo "  $0 linux linux-x86"
-}
-
-die()
-{
-	echo "$@" >&2
-	return 1
-}
-
-case "$1" in
--h|--help) usage; exit 0;;
-esac
-
-[ $# -lt 2 ] && die 2 targets needed. See $0 --help
-target1=$1
-target2=$2
-
-topdir=$(cd "`dirname $0`"/..; pwd)
-cd "$topdir"
-
-[ -f "./configs/$target1" ] || die Missing configs/$target1
-[ -f "./configs/$target2" ] || die Missing configs/$target2
-
-trap 'rm -f "$t1" "$t2"' 0
-
-t1=$(mktemp)
-t2=$(mktemp)
-
-make -f- -n -p <<EOF | sed '/^# Not a target/,/^$/d' > $t1
-TOP = .
-include \$(TOP)/configs/$target1
-default:
-EOF
-
-make -f- -n -p <<EOF | sed '/^# Not a target/,/^$/d' > $t2
-TOP = .
-include \$(TOP)/configs/$target2
-default:
-EOF
-
-diff -pu -I'^#' $t1 $t2

bin/install-sh

@@ -1 +0,0 @@
-minstall

bin/installmesa

@@ -62,10 +62,10 @@ fi
 
 set -v
 
-mkdir -p ${INCLUDE_DIR}
-mkdir -p ${INCLUDE_DIR}/GL
-# NOT YET: mkdir -p ${INCLUDE_DIR}/GLES
-mkdir -p ${LIB_DIR}
+mkdir ${INCLUDE_DIR}
+mkdir ${INCLUDE_DIR}/GL
+# NOT YET: mkdir ${INCLUDE_DIR}/GLES
+mkdir ${LIB_DIR}
 cp -f ${TOP}/include/GL/*.h ${INCLUDE_DIR}/GL
 cp -f ${TOP}/src/glw/*.h ${INCLUDE_DIR}/GL
 # NOT YET: cp -f ${TOP}/include/GLES/*.h ${INCLUDE_DIR}/GLES

bin/minstall

@@ -1,90 +0,0 @@
-#!/bin/sh
-
-
-# A minimal replacement for 'install' that supports installing symbolic links.
-# Only a limited number of options are supported:
-# -d dir          Create a directory
-# -m mode         Sets a file's mode when installing
-
-
-# If these commands aren't portable, we'll need some "if (arch)" type stuff
-SYMLINK="ln -s"
-MKDIR="mkdir -p"
-RM="rm -f"
-
-MODE=""
-
-if [ "$1" = "-d" ] ; then
-	# make a directory path
-	$MKDIR "$2"
-	exit 0
-fi
-
-if [ "$1" = "-m" ] ; then
-	# set file mode
-	MODE=$2
-	shift 2
-fi
-
-# install file(s) into destination
-if [ $# -ge 2 ] ; then
-
-	# Last cmd line arg is the dest dir
-	for FILE in $@ ; do
-		DEST="$FILE"
-	done
-
-	# Loop over args, moving them to DEST directory
-	I=1
-	for FILE in $@ ; do
-		if [ $I = $# ] ; then
-			# stop, don't want to install $DEST into $DEST
-			exit 0
-		fi
-
-		PWDSAVE=`pwd`
-
-		# determine file's type
-		if [ -h "$FILE" ] ; then
-			#echo $FILE is a symlink
-			# Unfortunately, cp -d isn't universal so we have to
-			# use a work-around.
-
-			# Use ls -l to find the target that the link points to
-			LL=`ls -l "$FILE"`
-			for L in $LL ; do
-				TARGET=$L
-			done
-			#echo $FILE is a symlink pointing to $TARGET
-
-			FILE=`basename "$FILE"`
-			# Go to $DEST and make the link
-			cd "$DEST"        # pushd
-				$RM "$FILE"
-				$SYMLINK "$TARGET" "$FILE"
-			cd "$PWDSAVE"     # popd
-
-		elif [ -f "$FILE" ] ; then
-			#echo "$FILE" is a regular file
-			$RM "$DEST/`basename $FILE`"
-			cp "$FILE" "$DEST"
-			if [ $MODE ] ; then
-				FILE=`basename "$FILE"`
-				chmod $MODE "$DEST/$FILE"
-			fi
-		else
-			echo "Unknown type of argument: " "$FILE"
-			exit 1
-		fi
-
-		I=`expr $I + 1`
-	done
-
-	exit 0
-fi
-
-# If we get here, we didn't find anything to do
-echo "Usage:"
-echo "  install -d dir                      Create named directory"
-echo "  install [-m mode] file [...] dest   Install files in destination"
-

bin/mklib

@@ -34,7 +34,6 @@ MINOR=0
 PATCH=""
 DEPS=""
 LINK=""
-LDFLAGS=""
 CPLUSPLUS=0
 STATIC=0
 DLOPEN=0
@@ -43,7 +42,7 @@ ARCH="auto"
 ARCHOPT=""
 NOPREFIX=0
 EXPORTS=""
-ID=""
+
 
 #
 # Parse arguments
@@ -61,21 +60,17 @@ do
 	    echo '  -minor N      specifies minor version number (default is 0)'
 	    echo '  -patch N      specifies patch version number (default is 0)'
 	    echo '  -lLIBRARY     specifies a dependency on LIBRARY'
-	    echo '  -LDIR         search in DIR for library dependencies at build time'
-	    echo '  -RDIR         search in DIR for library dependencies at run time'
+	    echo '  -LDIR         search in DIR for library dependencies'
 	    echo '  -linker L     explicity specify the linker program to use (eg: gcc, g++)'
 	    echo '                Not observed on all systems at this time.'
-	    echo '  -ldflags OPT  specify any additional linker flags in OPT'
 	    echo '  -cplusplus    link with C++ runtime'
 	    echo '  -static       make a static library (default is dynamic/shared)'
 	    echo '  -dlopen       make a shared library suitable for dynamic loading'
 	    echo '  -install DIR  put resulting library file(s) in DIR'
 	    echo '  -arch ARCH    override using `uname` to determine host system'
 	    echo '  -archopt OPT  specify an extra achitecture-specific option OPT'
-	    echo '  -altopts OPTS alternate options to override all others'
 	    echo "  -noprefix     don't prefix library name with 'lib' nor add any suffix"
 	    echo '  -exports FILE only export the symbols listed in FILE'
-	    echo '  -id NAME      Sets the id of the dylib (Darwin)'
 	    echo '  -h, --help    display this information and exit'
 	    exit 1
 	    ;;
@@ -99,29 +94,12 @@ do
 	    shift 1;
 	    LINK=$1
 	    ;;
-	'-ldflags')
-	    shift 1;
-	    LDFLAGS=$1
-	    ;;
 	-l*)
 	    DEPS="$DEPS $1"
 	    ;;
 	-L*)
 	    DEPS="$DEPS $1"
 	    ;;
-	-R*)
-	    DEPS="$DEPS $1"
-	    ;;
-	-Wl*)
-            DEPS="$DEPS $1"
-            ;;
-	-pthread)
-	    # this is a special case (see bugzilla 10876)
-	    DEPS="$DEPS $1"
-	    ;;
-	'-pthread')
-	    DEPS="$DEPS -pthread"
-	    ;;
 	'-cplusplus')
 	    CPLUSPLUS=1
 	    ;;
@@ -143,10 +121,6 @@ do
 	    shift 1;
 	    ARCHOPT=$1
 	    ;;
-	'-altopts')
-            shift 1;
-            ALTOPTS=$1
-            ;;
 	'-noprefix')
 	    NOPREFIX=1
 	    ;;
@@ -154,10 +128,6 @@ do
 	    shift 1;
 	    EXPORTS=$1
 	    ;;
-	'-id')
-	    shift 1;
-	    ID=$1
-	    ;;
 	-*)
 	    echo "mklib: Unknown option: " $1 ;
 	    exit 1
@@ -201,7 +171,6 @@ if [  ]  ; then
     echo PATCH is $PATCH
     echo DEPS are $DEPS
     echo "EXPORTS in" $EXPORTS
-    echo ID is $ID
     echo "-----------------"
 fi
 
@@ -211,7 +180,7 @@ fi
 #
 case $ARCH in
 
-    'Linux' | 'OpenBSD' | 'DragonFly' | 'GNU' | GNU/*)
+    'Linux' | 'OpenBSD' | 'GNU' | GNU/*)
 	# we assume gcc
 
 	if [ "x$LINK" = "x" ] ; then
@@ -226,13 +195,8 @@ case $ARCH in
 	if [ $NOPREFIX = 1 ] ; then
 	    # No "lib" or ".so" part
 	    echo "mklib: Making" $ARCH "shared library: " ${LIBNAME}
-	    case $ARCH in 'Linux' | 'GNU' | GNU/*)
-		OPTS="-Xlinker -Bsymbolic -shared"
-	    ;;
-	    *)
-		OPTS="-shared"
-	    ;;
-	    esac
+	    #OPTS="-shared -Wl,-soname,${LIBNAME}"  # soname???
+	    OPTS="-shared"
 
 	    # Check if objects are 32-bit and we're running in 64-bit
 	    # environment.  If so, pass -m32 flag to linker.
@@ -242,29 +206,21 @@ case $ARCH in
 		OPTS="-m32 ${OPTS}"
 	    fi
 
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
-
             rm -f ${LIBNAME}
             # make lib
-            ${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
+            ${LINK} ${OPTS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
             # finish up
             FINAL_LIBS="${LIBNAME}"
         elif [ $STATIC = 1 ] ; then
-            LIBNAME="lib${LIBNAME}.a"     # prefix with "lib", suffix with ".a"
-            echo "mklib: Making" $ARCH "static library: " ${LIBNAME}
+	    LIBNAME="lib${LIBNAME}"     # prefix with "lib"
+            echo "mklib: Making" $ARCH "static library: " ${LIBNAME}.a
             LINK="ar"
             OPTS="-ru"
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
-            rm -f ${LIBNAME}
             # make lib
-            ${LINK} ${OPTS} ${LIBNAME} ${OBJECTS}
-            ranlib ${LIBNAME}
+            ${LINK} ${OPTS} ${LIBNAME}.a ${OBJECTS}
+	    ranlib ${LIBNAME}.a
             # finish up
-            FINAL_LIBS=${LIBNAME}
+            FINAL_LIBS=${LIBNAME}.a
         else
 	    LIBNAME="lib${LIBNAME}"     # prefix with "lib"
 	    case $ARCH in 'Linux' | 'GNU' | GNU/*)
@@ -277,7 +233,7 @@ case $ARCH in
 	    if [ $EXPORTS ] ; then
 		#OPTS="${OPTS} -Xlinker --retain-symbols-file ${EXPORTS}"
 		# Make the 'exptmp' file for --version-script option
-		echo "{" > exptmp
+		echo "VERSION_${MAJOR}.${MINOR} {" > exptmp
 		echo "global:" >> exptmp
 		sed 's/$/;/' ${EXPORTS} >> exptmp
 		echo "local:" >> exptmp
@@ -294,9 +250,6 @@ case $ARCH in
 	    if [ "${ABI32}" -a `uname -m` = "x86_64" ] ; then
 		OPTS="-m32 ${OPTS}"
 	    fi
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
 
 	    if [ x${PATCH} = "x" ] ; then
 		VERSION="${MAJOR}.${MINOR}"
@@ -312,7 +265,7 @@ case $ARCH in
             rm -f ${LIBNAME}.so
 
             # make lib
-            ${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME}.so.${VERSION} ${OBJECTS} ${DEPS}
+            ${LINK} ${OPTS} -o ${LIBNAME}.so.${VERSION} ${OBJECTS} ${DEPS}
             # make usual symlinks
             ln -s ${LIBNAME}.so.${VERSION} ${LIBNAME}.so.${MAJOR}
             ln -s ${LIBNAME}.so.${MAJOR} ${LIBNAME}.so
@@ -330,9 +283,7 @@ case $ARCH in
 	    ar -ruv ${LIBNAME} ${OBJECTS}
 	    FINAL_LIBS=${LIBNAME}
 	else
-	    if [ $NOPREFIX = 0 ] ; then
-		LIBNAME="lib${LIBNAME}.so"
-	    fi
+	    LIBNAME="lib${LIBNAME}.so"
 	    echo "mklib: Making SunOS shared library: " ${LIBNAME}
 
 	    if [ "x$LINK" = "x" ] ; then
@@ -346,7 +297,7 @@ case $ARCH in
 			# use g++
 			LINK="g++"
 		    else
-			echo "mklib: warning: can't find C++ compiler, trying CC."
+			echo "mklib: warning: can't find C++ comiler, trying CC."
 			LINK="CC"
 		    fi
 		else
@@ -375,25 +326,16 @@ case $ARCH in
 	    # Check if objects are SPARC v9
 	    # file says: ELF 64-bit MSB relocatable SPARCV9 Version 1
 	    set ${OBJECTS}
-	    if [ ${LINK} = "cc" -o ${LINK} = "CC" ] ; then
-		SPARCV9=`file $1 | grep SPARCV9`
-		if [ "${SPARCV9}" ] ; then
-		    OPTS="${OPTS} -xarch=v9"
-		fi
+	    SPARCV9=`file $1 | grep SPARCV9`
+	    if [ "${SPARCV9}" ] ; then
+		OPTS="${OPTS} -xarch=v9"
 	    fi
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
+
 	    # for debug:
 	    #echo "mklib: linker is" ${LINK} ${OPTS}
-	    if [ $NOPREFIX = 1 ] ; then
-		rm -f ${LIBNAME}
-		${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
-	    else
-		rm -f ${LIBNAME}.${MAJOR} ${LIBNAME}
-		${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME}.${MAJOR} -h ${LIBNAME}.${MAJOR} ${OBJECTS} ${DEPS}
-		ln -s ${LIBNAME}.${MAJOR} ${LIBNAME}
-	    fi
+	    rm -f ${LIBNAME}.${MAJOR} ${LIBNAME}
+	    ${LINK} ${OPTS} -o ${LIBNAME}.${MAJOR} ${OBJECTS} ${DEPS}
+	    ln -s ${LIBNAME}.${MAJOR} ${LIBNAME}
 	    FINAL_LIBS="${LIBNAME}.${MAJOR} ${LIBNAME}"
 	fi
 	;;
@@ -414,11 +356,8 @@ case $ARCH in
 	    # No "lib" or ".so" part
 	    echo "mklib: Making FreeBSD shared library: " ${LIBNAME}
 	    OPTS="-shared"
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
 	    rm -f ${LIBNAME}
-	    ${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
+	    ${LINK} ${OPTS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
 	    FINAL_LIBS=${LIBNAME}
         elif [ $STATIC = 1 ] ; then
 	    STLIB="lib${LIBNAME}.a"
@@ -430,12 +369,9 @@ case $ARCH in
 	else
 	    SHLIB="lib${LIBNAME}.so.${MAJOR}"
 	    OPTS="-shared -Wl,-soname,${SHLIB}"
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
 	    echo "mklib: Making FreeBSD shared library: " ${SHLIB}
 	    rm -f ${SHLIB}
-	    ${LINK} ${OPTS} ${LDFLAGS} -o ${SHLIB} ${OBJECTS} ${DEPS}
+	    ${LINK} ${OPTS} -o ${SHLIB} ${OBJECTS} ${DEPS}
 	    ln -sf ${SHLIB} "lib${LIBNAME}.so"
 	    FINAL_LIBS="${SHLIB} lib${LIBNAME}.so"
 	fi
@@ -486,10 +422,6 @@ case $ARCH in
 		exit 1
 	    fi
 
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
-
 	    if [ $CPLUSPLUS = 1 ] ; then
 		LINK="CC"
 	    else
@@ -497,7 +429,7 @@ case $ARCH in
 	    fi
 
 	    echo "mklib: Making IRIX " ${ABI} " shared library: " ${LIBNAME}
-	    ${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
+	    ${LINK} ${OPTS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
 	    FINAL_LIBS=${LIBNAME}
 	fi
 	;;
@@ -570,16 +502,12 @@ case $ARCH in
 		}
 	    }' | sort -u >> ${EXPFILE}
 
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
-
             # On AIX a shared library is linked differently when
             # you want to dlopen the file
 	    if [ $DLOPEN = "1" ] ; then
-		cc -G ${OPTS} ${LDFLAGS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
+		cc -G ${OPTS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
 	    else
-		cc ${OPTS} ${LDFLAGS} -o ${OFILE} ${OBJECTS} ${DEPS}
+		cc ${OPTS} -o ${OFILE} ${OBJECTS} ${DEPS}
 		ar ${X64} -r ${LIBNAME} ${OFILE}
 	    fi
 
@@ -625,9 +553,6 @@ case $ARCH in
             echo "mklib: Making Darwin static library: " ${LIBNAME}
             LINK="ar"
             OPTS="-ruvs"
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
             ${LINK} ${OPTS} ${LIBNAME} ${OBJECTS}
             FINAL_LIBS=${LIBNAME}
         else
@@ -636,46 +561,22 @@ case $ARCH in
                 LIBSUFFIX="bundle"
                 OPTS="${ARCHOPT} -bundle -multiply_defined suppress"
             else
-                LIBSUFFIX="dylib"
-                if [ -z "$ID" ] ; then
-                    ID="lib${LIBNAME}.${MAJOR}.${LIBSUFFIX}"
-                fi
-                OPTS="${ARCHOPT} -dynamiclib -multiply_defined suppress -current_version ${MAJOR}.${MINOR}.0 -compatibility_version ${MAJOR}.${MINOR}.0 -install_name ${ID}"
+		LIBSUFFIX="dylib"
+                OPTS="${ARCHOPT} -dynamiclib -multiply_defined suppress -current_version ${MAJOR}.${MINOR}.0 -compatibility_version ${MAJOR}.${MINOR}.0 -install_name lib${LIBNAME}.${MAJOR}.${LIBSUFFIX}"
             fi
-
-            if [ ${EXPORTS} ] ; then
-                if [ -f ${EXPORTS}".darwin" ] ; then
-                    EXPORTS=$EXPORTS".darwin"
-                fi
-                OPTS="${OPTS} -exported_symbols_list ${EXPORTS}"
-            fi
-
-            LINKNAME="lib${LIBNAME}.${MAJOR}.${LIBSUFFIX}"
-            LINKNAME2="lib${LIBNAME}.${LIBSUFFIX}"
-            LIBNAME="lib${LIBNAME}.${MAJOR}.${MINOR}.${LIBSUFFIX}"
+            LINKNAME="lib${LIBNAME}.${LIBSUFFIX}"
+            LIBNAME="lib${LIBNAME}.${MAJOR}.${LIBSUFFIX}"
 
 	    # examine first object to determine ABI
     	    set ${OBJECTS}
-            ABI_PPC=`file $1 | grep ' ppc'`
-            ABI_I386=`file $1 | grep ' i386'`
-            ABI_PPC64=`file $1 | grep ' ppc64'`
-            ABI_X86_64=`file $1 | grep ' x86_64'`
-            if [ "${ABI_PPC}" ] ; then
-                OPTS="${OPTS} -arch ppc"
-            fi
-            if [ "${ABI_I386}" ] ; then
-                OPTS="${OPTS} -arch i386"
-            fi
-            if [ "${ABI_PPC64}" ] ; then
-                OPTS="${OPTS} -arch ppc64"
-            fi
-            if [ "${ABI_X86_64}" ] ; then
-                OPTS="${OPTS} -arch x86_64"
-            fi
-
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
+	    ABI_PPC=`file $1 | grep 'object ppc'`
+	    ABI_I386=`file $1 | grep 'object i386'`
+	    if [ "${ABI_PPC}" ] ; then
+		OPTS="${OPTS} -arch ppc"
+	    fi
+	    if [ "${ABI_I386}" ] ; then
+		OPTS="${OPTS} -arch i386"
+	    fi
 
 	    # XXX can we always add -isysroot /Developer/SDKs/MacOSX10.4u.sdk
 	    # to OPTS here?
@@ -688,11 +589,9 @@ case $ARCH in
 	    fi
 
             echo "mklib: Making Darwin shared library: " ${LIBNAME}
-
-            ${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
+            ${LINK} ${OPTS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
             ln -s ${LIBNAME} ${LINKNAME}
-            ln -s ${LIBNAME} ${LINKNAME2}
-            FINAL_LIBS="${LIBNAME} ${LINKNAME} ${LINKNAME2}"
+            FINAL_LIBS="${LIBNAME} ${LINKNAME}"
         fi
         ;;
 
@@ -744,9 +643,6 @@ case $ARCH in
             echo "mklib: Making Intel ICC static library: " ${LIBNAME}.a
             LINK="ar"
             OPTS="-ruv"
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
             # make lib
             ${LINK} ${OPTS} ${LIBNAME}.a ${OBJECTS}
             # finish up
@@ -757,9 +653,6 @@ case $ARCH in
             else
                  OPTS="-shared"
             fi
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
             VERSION="${MAJOR}.${MINOR}.${PATCH}"
             echo "mklib: Making Intel ICC shared library: " ${LIBNAME}.so.${VERSION}
 
@@ -773,7 +666,7 @@ case $ARCH in
             rm -f ${LIBNAME}.so.${MAJOR}
             rm -f ${LIBNAME}.so
             # make lib
-            ${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME}.so.${VERSION} ${OBJECTS} ${DEPS}
+            ${LINK} ${OPTS} -o ${LIBNAME}.so.${VERSION} ${OBJECTS} ${DEPS}
             # make usual symlinks
             ln -s ${LIBNAME}.so.${VERSION} ${LIBNAME}.so.${MAJOR}
             ln -s ${LIBNAME}.so.${MAJOR} ${LIBNAME}.so
@@ -824,9 +717,6 @@ case $ARCH in
             echo "mklib: Making" $ARCH "static library: " ${LIBNAME}.a
             LINK="ar"
             OPTS="-ru"
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
             # make lib
             ${LINK} ${OPTS} ${LIBNAME}.a ${OBJECTS}
 	    ranlib ${LIBNAME}.a
@@ -834,9 +724,6 @@ case $ARCH in
             FINAL_LIBS=${LIBNAME}.a
         else
 	    OPTS="-shared -Wl,-export-all -Wl,--out-implib=${LIBNAME}-${MAJOR}.dll.a"
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
             echo "mklib: Making" $ARCH "shared library: " ${LIBNAME}-${MAJOR}.dll
 
             if [ $CPLUSPLUS = 1 ] ; then
@@ -851,7 +738,7 @@ case $ARCH in
             rm -f ${LIBNAME}.a
 
             # make lib
-            ${LINK} ${OPTS} ${LDFLAGS} -o ${CYGNAME}-${MAJOR}.dll ${OBJECTS} ${DEPS}
+            ${LINK} ${OPTS} -o ${CYGNAME}-${MAJOR}.dll ${OBJECTS} ${DEPS}
             # make usual symlinks
             ln -s ${LIBNAME}-${MAJOR}.dll.a ${LIBNAME}.dll.a
             # finish up

bin/version.mk

@@ -1,17 +0,0 @@
-#!/usr/bin/make -sf
-# Print the various Mesa version fields. This is mostly used to add the
-# version to configure.
-
-# This reflects that this script is usually called from the toplevel
-TOP = .
-
-include $(TOP)/configs/default
-
-version:
-	@echo $(MESA_VERSION)
-major:
-	@echo $(MESA_MAJOR)
-minor:
-	@echo $(MESA_MINOR)
-tiny:
-	@echo $(MESA_TINY)

configs/.gitignore

@@ -1,2 +0,0 @@
-current
-autoconf

configs/aix

@@ -13,6 +13,7 @@ CXXFLAGS = -O -DAIXV3 -DPTHREADS
 
 # Misc tools and flags
 MKLIB_OPTIONS =
+COPY_LIBS = cp -f -h
 
 # Library names (actual file names)
 GL_LIB_NAME = libGL.a

configs/aix-gcc

@@ -11,10 +11,6 @@ CXX = g++
 CFLAGS = -O2 -DAIXV3
 CXXFLAGS = -O2 -DAIXV3
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 MKLIB_OPTIONS = -arch aix-gcc
 GL_LIB_DEPS = -lX11 -lXext -lm
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lm

configs/autoconf.in

@@ -1,106 +0,0 @@
-# Autoconf configuration
-
-# Pull in the defaults
-include $(TOP)/configs/default
-
-# This is generated by configure
-CONFIG_NAME = autoconf
-
-# Compiler and flags
-CC = @CC@
-CXX = @CXX@
-OPT_FLAGS = @OPT_FLAGS@
-ARCH_FLAGS = @ARCH_FLAGS@
-ASM_FLAGS = @ASM_FLAGS@
-PIC_FLAGS = @PIC_FLAGS@
-DEFINES = @DEFINES@
-CFLAGS = @CPPFLAGS@ @CFLAGS@ \
-	$(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(ASM_FLAGS) $(DEFINES)
-CXXFLAGS = @CPPFLAGS@ @CXXFLAGS@ \
-	$(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
-LDFLAGS = @LDFLAGS@
-EXTRA_LIB_PATH = @EXTRA_LIB_PATH@
-
-# Assembler
-ASM_SOURCES = @ASM_SOURCES@
-ASM_API = @ASM_API@
-
-# Misc tools and flags
-MAKE = @MAKE@
-SHELL = @SHELL@
-MKLIB_OPTIONS = @MKLIB_OPTIONS@
-MKDEP = @MKDEP@
-MKDEP_OPTIONS = @MKDEP_OPTIONS@
-
-# Python and flags (generally only needed by the developers)
-PYTHON2 = python
-PYTHON_FLAGS = -t -O -O
-
-# Library names (base name)
-GL_LIB = GL
-GLU_LIB = GLU
-GLUT_LIB = glut
-GLW_LIB = GLw
-OSMESA_LIB = @OSMESA_LIB@
-
-# Library names (actual file names)
-GL_LIB_NAME = @GL_LIB_NAME@
-GLU_LIB_NAME = @GLU_LIB_NAME@
-GLUT_LIB_NAME = @GLUT_LIB_NAME@
-GLW_LIB_NAME = @GLW_LIB_NAME@
-OSMESA_LIB_NAME = @OSMESA_LIB_NAME@
-
-# Directories to build
-LIB_DIR = @LIB_DIR@
-SRC_DIRS = @SRC_DIRS@
-GLU_DIRS = @GLU_DIRS@
-DRIVER_DIRS = @DRIVER_DIRS@
-# Which subdirs under $(TOP)/progs/ to enter:
-PROGRAM_DIRS = @PROGRAM_DIRS@
-
-# Driver specific build vars
-DRI_DIRS = @DRI_DIRS@
-WINDOW_SYSTEM = @WINDOW_SYSTEM@
-USING_EGL = @USING_EGL@
-
-# Dependencies
-X11_INCLUDES = @X11_INCLUDES@
-
-# GLw motif setup
-GLW_SOURCES = @GLW_SOURCES@
-MOTIF_CFLAGS = @MOTIF_CFLAGS@
-
-# Library/program dependencies
-GL_LIB_DEPS = $(EXTRA_LIB_PATH) @GL_LIB_DEPS@
-OSMESA_LIB_DEPS = -L$(TOP)/$(LIB_DIR) @OSMESA_MESA_DEPS@ \
-	$(EXTRA_LIB_PATH) @OSMESA_LIB_DEPS@
-GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) @GLU_MESA_DEPS@ \
-	$(EXTRA_LIB_PATH) @GLU_LIB_DEPS@
-GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) @GLUT_MESA_DEPS@ \
-	$(EXTRA_LIB_PATH) @GLUT_LIB_DEPS@
-GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) @GLW_MESA_DEPS@ \
-	$(EXTRA_LIB_PATH) @GLW_LIB_DEPS@
-APP_LIB_DEPS = $(EXTRA_LIB_PATH) @APP_LIB_DEPS@
-
-# DRI dependencies
-DRI_LIB_DEPS = $(EXTRA_LIB_PATH) @DRI_LIB_DEPS@
-LIBDRM_CFLAGS = @LIBDRM_CFLAGS@
-LIBDRM_LIB = @LIBDRM_LIBS@
-EXPAT_INCLUDES = @EXPAT_INCLUDES@
-
-# Autoconf directories
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-libdir = @libdir@
-includedir = @includedir@
-
-# Installation directories (for make install)
-INSTALL_DIR = $(prefix)
-INSTALL_LIB_DIR = $(libdir)
-INSTALL_INC_DIR = $(includedir)
-
-# DRI installation directories
-DRI_DRIVER_INSTALL_DIR = @DRI_DRIVER_INSTALL_DIR@
-
-# Where libGL will look for DRI hardware drivers
-DRI_DRIVER_SEARCH_DIR = $(DRI_DRIVER_INSTALL_DIR)

configs/beos

@@ -39,10 +39,6 @@ ifeq ($(CPU), x86)
 
 	CXXFLAGS = $(CFLAGS)
 
-	# Work around aliasing bugs - developers should comment this out
-	CFLAGS += -fno-strict-aliasing
-	CXXFLAGS += -fno-strict-aliasing
-
 	LDFLAGS += -Xlinker
 
 	ifdef DEBUG

configs/bluegene-osmesa

@@ -1,33 +0,0 @@
-# Configuration for building only libOSMesa on BlueGene, no Xlib driver
-# This doesn't really have a lot of dependencies, so it should be usable
-# on other (gcc-based) systems too.
-# It uses static linking and disables multithreading.
-
-include $(TOP)/configs/default
-
-CONFIG_NAME = bluegene-osmesa
-
-# Compiler and flags
-CC = /bgl/BlueLight/ppcfloor/blrts-gnu/bin/powerpc-bgl-blrts-gnu-gcc
-CXX = /bgl/BlueLight/ppcfloor/blrts-gnu/bin/powerpc-bgl-blrts-gnu-g++
-CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
-CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURC
-
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
-MKLIB_OPTIONS = -static
-
-OSMESA_LIB_NAME = libOSMesa.a
-
-# Directories
-SRC_DIRS = mesa glu
-DRIVER_DIRS = osmesa
-PROGRAM_DIRS = osdemos
-
-
-# Dependencies
-OSMESA_LIB_DEPS = -lm
-GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
-APP_LIB_DEPS = -lOSMesa -lGLU -lm

configs/bluegene-xlc-osmesa

@@ -1,29 +0,0 @@
-# Configuration for building only libOSMesa on BlueGene using the IBM xlc compiler
-# This doesn't really have a lot of dependencies, so it should be usable
-# on similar systems too.
-# It uses static linking and disables multithreading.
-
-include $(TOP)/configs/default
-
-CONFIG_NAME = bluegene-osmesa
-
-# Compiler and flags
-CC = /opt/ibmcmp/vacpp/bg/8.0/bin/blrts_xlc
-CXX = /opt/ibmcmp/vacpp/bg/8.0/bin/blrts_xlC
-CFLAGS = -O3 -pedantic -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
-CXXFLAGS = -O3 -pedantic -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
-
-MKLIB_OPTIONS = -static
-
-OSMESA_LIB_NAME = libOSMesa.a
-
-# Directories
-SRC_DIRS = mesa glu
-DRIVER_DIRS = osmesa
-PROGRAM_DIRS = osdemos
-
-
-# Dependencies
-OSMESA_LIB_DEPS = -lm
-GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
-APP_LIB_DEPS = -lOSMesa -lGLU -lm

configs/catamount-osmesa-pgi

@@ -1,32 +0,0 @@
-# Configuration for building only libOSMesa on Cray Xt3
-# for the compute nodes running Catamount using the 
-# Portland Group compiler. The Portland Group toolchain has to be 
-# enabled before using "module switch PrgEnv-gnu PrgEnv-pgi" .
-# This doesn't really have a lot of dependencies, so it should be usable
-# on other similar systems too.
-# It uses static linking and disables multithreading.
-
-include $(TOP)/configs/default
-
-CONFIG_NAME = catamount-osmesa-pgi
-
-# Compiler and flags
-CC = cc
-CXX = CC
-CFLAGS = -target=catamount -fastsse -O3 -Mnontemporal -Mprefetch=distance:8,nta   -fPIC -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
-CXXFLAGS = -target=catamount -fastsse -O3 -Mnontemporal -Mprefetch=distance:8,nta -fPIC -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
-
-MKLIB_OPTIONS = -static
-
-OSMESA_LIB_NAME = libOSMesa.a
-
-# Directories
-SRC_DIRS = mesa glu
-DRIVER_DIRS = osmesa
-PROGRAM_DIRS = osdemos
-
-
-# Dependencies
-OSMESA_LIB_DEPS = -lm
-GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
-APP_LIB_DEPS = -lOSMesa -lGLU -lm

configs/config.mgw

@@ -1,42 +0,0 @@
-# MinGW config include file updated for Mesa 7.0
-#
-#  Updated : by Heromyth, on 2007-7-21
-#  Email   : zxpmyth@yahoo.com.cn
-#  Bugs    : 1) All the default settings work fine. But the setting X86=1 can't work. 
-#            The others havn't been tested yet.
-#            2) The generated DLLs are *not* compatible with the ones built
-#            with the other compilers like VC8, especially for GLUT. 
-#            3) Although more tests are needed, it can be used individually!
-
-# The generated DLLs by MingW with STDCALL are not totally compatible 
-# with the ones linked by Microsoft's compilers.
-#
-# xxx_USING_STDCALL = 1          Compiling MESA with __stdcall. This is default!
-# 
-# xxx_USING_STDCALL = 0          Compiling MESA without __stdcall. I like this:)
-#  
-
-# In fact, GL_USING_STDCALL and GLUT_USING_STDCALL can be
-# different. For example:
-#
-#   GL_USING_STDCALL = 0
-#   GLUT_USING_STDCALL = 1
-# 
-# Suggested setting:
-#
-#     ALL_USING_STDCALL = 1
-#
-# That's default!
-#
-
-
-ALL_USING_STDCALL = 1
-
-
-ifeq ($(ALL_USING_STDCALL),1)
-  GL_USING_STDCALL = 1
-  GLUT_USING_STDCALL = 1
-else
-  GL_USING_STDCALL = 0
-  GLUT_USING_STDCALL = 0
-endif

configs/darwin

@@ -4,26 +4,11 @@ include $(TOP)/configs/default
 
 CONFIG_NAME = darwin
 
-INSTALL_DIR = /usr/X11
-
 # Compiler and flags
-CC = gcc
-CXX = gcc
-PIC_FLAGS = -fPIC
-DEFINES =  -D_DARWIN_C_SOURCE -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L \
-	   -D_BSD_SOURCE -D_SVID_SOURCE -D_GNU_SOURCE -DPTHREADS \
-	   -DGLX_INDIRECT_RENDERING \
-	   -DGLX_ALIAS_UNSUPPORTED
-
-# -DGLX_DIRECT_RENDERING - pulls in libdrm stuff in glx/x11
-# -DIN_DRI_DRIVER
-
-ARCH_FLAGS += $(RC_CFLAGS)
-
-CFLAGS =  -g -O2 -Wall -Wmissing-prototypes -std=c99 -ffast-math -fno-strict-aliasing \
-	-I$(INSTALL_DIR)/include $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(ASM_FLAGS) $(DEFINES)
-CXXFLAGS =  -g -O2 -Wall -fno-strict-aliasing \
-	-I$(INSTALL_DIR)/include $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(ASM_FLAGS) $(DEFINES)
+CC = cc
+CXX = cc
+CFLAGS = -I/usr/X11R6/include -O3 -fPIC -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
+CXXFLAGS = -I/usr/X11R6/include -O3 -fPIC -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
 
 # Library names (actual file names)
 GL_LIB_NAME = libGL.dylib
@@ -32,24 +17,13 @@ GLUT_LIB_NAME = libglut.dylib
 GLW_LIB_NAME = libGLw.dylib
 OSMESA_LIB_NAME = libOSMesa.dylib
 
-# globs used to install the lib and all symlinks
-GL_LIB_GLOB = libGL.*dylib
-GLU_LIB_GLOB = libGLU.*dylib
-GLUT_LIB_GLOB = libglut.*dylib
-GLW_LIB_GLOB = libGLw.*dylib
-OSMESA_LIB_GLOB = libOSMesa.*dylib
-
-GL_LIB_DEPS = -L$(INSTALL_DIR)/$(LIB_DIR) -lX11 -lXext -lm -lpthread
-OSMESA_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB)
-GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB)
-GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB)  -L$(INSTALL_DIR)/$(LIB_DIR) -lX11 -lXmu -lXi -lXext
-GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -L$(INSTALL_DIR)/$(LIB_DIR) -lX11 -lXt
-APP_LIB_DEPS = -L$(TOP)/lib -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L$(INSTALL_DIR)/$(LIB_DIR) -lX11 -lXmu -lXt -lXi -lm
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread
+OSMESA_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -lGL
+GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -lGL
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -lGL -lGLU -L/usr/X11R6/lib -lX11 -lXmu -lXi -lXext
+GLW_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXt $(TOP)/lib/GL.dylib
+APP_LIB_DEPS = -L$(TOP)/lib -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
 
 # omit glw lib for now:
-SRC_DIRS = glx/x11 mesa glu glw glut/glx
-GLU_DIRS = sgi
-DRIVER_DIRS = osmesa
-#DRIVER_DIRS = dri
-DRI_DIRS = swrast
-PROGRAM_DIRS = xdemos
+SRC_DIRS = mesa glu glut/glx
+

configs/darwin-fat-32bit

@@ -1,7 +0,0 @@
-# Configuration for Darwin / MacOS X, making 32bit fat dynamic libs
-
-RC_CFLAGS=-arch ppc -arch i386
-
-include $(TOP)/configs/darwin
-
-CONFIG_NAME = darwin-fat-32bit

configs/darwin-fat-all

@@ -1,7 +0,0 @@
-# Configuration for Darwin / MacOS X, making 32bit and 64bit fat dynamic libs
-
-RC_CFLAGS=-arch ppc -arch i386 -arch ppc64 -arch x86_64
-
-include $(TOP)/configs/darwin
-
-CONFIG_NAME = darwin-fat-all

configs/darwin-static

@@ -0,0 +1,24 @@
+# Configuration for Darwin / MacOS X, making static libs
+
+include $(TOP)/configs/darwin
+
+CONFIG_NAME = darwin-static
+
+# Compiler and flags
+CFLAGS = -I/usr/X11R6/include -O3 -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
+CXXFLAGS = -I/usr/X11R6/include -O3 -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
+MKLIB_OPTIONS = -static
+
+# Library names (actual file names)
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a
+
+GL_LIB_DEPS =
+OSMESA_LIB_DEPS = 
+GLU_LIB_DEPS = 
+GLUT_LIB_DEPS = 
+GLW_LIB_DEPS = 
+APP_LIB_DEPS = -Wl,-search_paths_first -L$(TOP)/lib -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lstdc++ -lgcc_s.1 -lm

configs/darwin-static-x86ppc

@@ -0,0 +1,26 @@
+# Configuration for Darwin / MacOS X, making static libs
+
+include $(TOP)/configs/darwin
+
+CONFIG_NAME = darwin-static
+
+# Compiler and flags
+CFLAGS = -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk \
+         -I/usr/X11R6/include -O3 -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
+CXXFLAGS = -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk \
+           -I/usr/X11R6/include -O3 -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
+MKLIB_OPTIONS = -static -archopt "-isysroot /Developer/SDKs/MacOSX10.4u.sdk"
+
+# Library names (actual file names)
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a
+
+GL_LIB_DEPS =
+OSMESA_LIB_DEPS = 
+GLU_LIB_DEPS = 
+GLUT_LIB_DEPS = 
+GLW_LIB_DEPS = 
+APP_LIB_DEPS = -Wl,-search_paths_first -L$(TOP)/lib -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lstdc++ -lgcc_s.1 -lm

configs/darwin-x86ppc

@@ -0,0 +1,33 @@
+# Configuration for Darwin / MacOS X, making dynamic libs
+
+include $(TOP)/configs/default
+
+CONFIG_NAME = darwin
+
+# Compiler and flags
+CC = cc
+CXX = cc
+CFLAGS = -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk \
+         -I/usr/X11R6/include -O3 -fPIC -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
+CXXFLAGS = -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk \
+         -I/usr/X11R6/include -O3 -fPIC -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
+
+MKLIB_OPTIONS = -archopt "-isysroot /Developer/SDKs/MacOSX10.4u.sdk"
+
+# Library names (actual file names)
+GL_LIB_NAME = libGL.dylib
+GLU_LIB_NAME = libGLU.dylib
+GLUT_LIB_NAME = libglut.dylib
+GLW_LIB_NAME = libGLw.dylib
+OSMESA_LIB_NAME = libOSMesa.dylib
+
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread
+OSMESA_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -lGL
+GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -lGL
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -lGL -lGLU -L/usr/X11R6/lib -lX11 -lXmu -lXi -lXext
+GLW_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXt $(TOP)/lib/GL.dylib
+APP_LIB_DEPS = -L$(TOP)/lib -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
+
+# omit glw lib for now:
+SRC_DIRS = mesa glu glut/glx
+

configs/default

@@ -8,10 +8,9 @@
 CONFIG_NAME = default
 
 # Version info
-MESA_MAJOR=7
-MESA_MINOR=2
-MESA_TINY=0
-MESA_VERSION = $(MESA_MAJOR).$(MESA_MINOR).$(MESA_TINY)
+MESA_MAJOR=6
+MESA_MINOR=5
+MESA_TINY=1
 
 # external projects.  This should be useless now that we use libdrm.
 DRM_SOURCE_PATH=$(TOP)/../drm
@@ -21,23 +20,19 @@ CC = cc
 CXX = CC
 CFLAGS = -O
 CXXFLAGS = -O
-LDFLAGS =
 GLU_CFLAGS = 
 
 # Misc tools and flags
-SHELL = /bin/sh
-MKLIB = $(SHELL) $(TOP)/bin/mklib
 MKLIB_OPTIONS = 
 MKDEP = makedepend
 MKDEP_OPTIONS = -fdepend
 MAKE = make
-INSTALL = $(SHELL) $(TOP)/bin/minstall
+INSTALL = install
+COPY_LIBS = cp -f -d
 
-# Tools for regenerating glapi (generally only needed by the developers)
+# Python and flags (generally only needed by the developers)
 PYTHON2 = python
 PYTHON_FLAGS = -t -O -O
-INDENT = indent
-INDENT_FLAGS = -i4 -nut -br -brs -npcs -ce -T GLubyte -T GLbyte -T Bool
 
 # Library names (base name)
 GL_LIB = GL
@@ -54,12 +49,6 @@ GLUT_LIB_NAME = lib$(GLUT_LIB).so
 GLW_LIB_NAME = lib$(GLW_LIB).so
 OSMESA_LIB_NAME = lib$(OSMESA_LIB).so
 
-# globs used to install the lib and all symlinks
-GL_LIB_GLOB = $(GL_LIB_NAME)*
-GLU_LIB_GLOB = $(GLU_LIB_NAME)*
-GLUT_LIB_GLOB = $(GLUT_LIB_NAME)*
-GLW_LIB_GLOB = $(GLW_LIB_NAME)*
-OSMESA_LIB_GLOB = $(OSMESA_LIB_NAME)*
 
 # Optional assembly language optimization files for libGL
 ASM_SOURCES = 
@@ -67,7 +56,6 @@ ASM_SOURCES =
 # GLw widget sources (Append "GLwMDrawA.c" here and add -lXm to GLW_LIB_DEPS in
 # order to build the Motif widget too)
 GLW_SOURCES = GLwDrawA.c
-MOTIF_CFLAGS = -I/usr/include/Motif1.2
 
 
 # Directories to build
@@ -76,26 +64,23 @@ SRC_DIRS = mesa glu glut/glx glw
 GLU_DIRS = sgi
 DRIVER_DIRS = x11 osmesa
 # Which subdirs under $(TOP)/progs/ to enter:
-PROGRAM_DIRS = demos redbook samples glsl xdemos
+PROGRAM_DIRS = demos redbook samples xdemos
 
 
-# Library dependencies
-#EXTRA_LIB_PATH ?=
+# Library/program dependencies
+EXTRA_LIB_PATH ?=
 GL_LIB_DEPS = $(EXTRA_LIB_PATH) -lX11 -lXext -lm -lpthread
 OSMESA_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB)
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lm
-GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) $(EXTRA_LIB_PATH) -lX11 -lXmu -lXi -lm
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) $(EXTRA_LIB_PATH) -lX11 -lXmu -lXt -lXi -lm
 GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) $(EXTRA_LIB_PATH) -lXt -lX11
+APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm
 
-# Program dependencies - specific GL/glut libraries added in Makefiles
-APP_LIB_DEPS = -lm
 
 
 # Installation directories (for make install)
 INSTALL_DIR = /usr/local
-INSTALL_LIB_DIR = $(INSTALL_DIR)/$(LIB_DIR)
-INSTALL_INC_DIR = $(INSTALL_DIR)/include
-DRI_DRIVER_INSTALL_DIR = $(INSTALL_LIB_DIR)/dri
+DRI_DRIVER_INSTALL_DIR = /usr/X11R6/lib/modules/dri
 
 # Where libGL will look for DRI hardware drivers
 DRI_DRIVER_SEARCH_DIR = $(DRI_DRIVER_INSTALL_DIR)

configs/freebsd

@@ -9,13 +9,15 @@ CC = cc
 CXX = c++
 MAKE = gmake
 
+# cp -d not supported on FreeBSD (see bug 4435)
+COPY_LIBS = cp -f
+
 OPT_FLAGS  = -O2
 PIC_FLAGS  = -fPIC
 
-DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_BSD_SOURCE -DUSE_XSHM \
-	-DHZ=100
+DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_BSD_SOURCE -DUSE_XSHM -DHZ=100
 
-X11_INCLUDES = -I/usr/local/include
+X11_INCLUDES = -I/usr/X11R6/include
 
 CFLAGS += $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(DEFINES) $(X11_INCLUDES) -ffast-math -pedantic
 
@@ -23,9 +25,5 @@ CXXFLAGS += $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(DEFINES) $(X11_INCLUDES)
 
 GLUT_CFLAGS = -fexceptions
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
-EXTRA_LIB_PATH = -L/usr/local/lib
+EXTRA_LIB_PATH = -L/usr/X11R6/lib
 APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) $(EXTRA_LIB_PATH) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lXext -lXmu -lXi -lX11 -lm

configs/freebsd-dri

@@ -9,34 +9,27 @@ CONFIG_NAME = freebsd-dri
 CC = gcc
 CXX = g++
 WARN_FLAGS = -Wall
-OPT_FLAGS = -O -g
+OPT_FLAGS = -O
 
 EXPAT_INCLUDES = -I/usr/local/include
-X11_INCLUDES = -I/usr/local/include
+X11_INCLUDES = -I/usr/X11R6/include
 DEFINES = -DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 -DIN_DRI_DRIVER \
-	-DGLX_DIRECT_RENDERING -DGLX_INDIRECT_RENDERING \
-	-DHAVE_ALIAS
+	-DGLX_DIRECT_RENDERING -DHAVE_ALIAS
 
-CFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) -Wmissing-prototypes -std=c99 -Wundef -ffast-math \
+CFLAGS = -Wmissing-prototypes -g -std=c99 -Wundef -fPIC -ffast-math \
 	$(ASM_FLAGS) $(X11_INCLUDES) $(DEFINES)
 
-CXXFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(DEFINES) -Wall -ansi -pedantic $(ASM_FLAGS) $(X11_INCLUDES) 
-
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
+CXXFLAGS = $(DEFINES) -Wall -g -ansi -pedantic -fPIC
 
 ASM_SOURCES = 
 
 # Library/program dependencies
-LIBDRM_CFLAGS = `pkg-config --cflags libdrm`
 LIBDRM_LIB = `pkg-config --libs libdrm`
-DRI_LIB_DEPS = -L/usr/local/lib -lm -pthread -lexpat $(LIBDRM_LIB)
-GL_LIB_DEPS = -L/usr/local/lib -lX11 -lXext -lXxf86vm -lXdamage -lXfixes \
-	-lm -pthread $(LIBDRM_LIB)
+DRI_LIB_DEPS = -L/usr/local/lib -lm -lpthread -lexpat $(LIBDRM_LIB)
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lXxf86vm -lm -lpthread $(LIBDRM_LIB)
 
-GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/local/lib -lGLU -lGL -lX11 -lXmu -lXt -lXi -lm
-GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/local/lib -lGL -lXt -lX11
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/X11R6/lib -lGLU -lGL -lX11 -lXmu -lXt -lXi -lm
+GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/X11R6/lib -lGL -lXt -lXm -lX11
 
 
 # Directories
@@ -49,6 +42,6 @@ DRM_SOURCE_PATH=$(TOP)/../drm
 
 # ffb and gamma are missing because they have not been converted to use the new
 # interface.
-DRI_DIRS = i810 i915 i965 mach64 mga r128 r200 r300 radeon tdfx \
+DRI_DIRS = i810 i915 mach64 mga r128 r200 r300 radeon tdfx \
 	   unichrome savage sis
 

configs/hpux10

@@ -8,7 +8,7 @@ CONFIG_NAME = hpux10
 CC = cc
 CXX = aCC
 
-CFLAGS = -O +DAportable +z -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM
-CXXFLAGS = -O +DAportable +Z -Ae -D_HPUX_SOURCE
+CFLAGS = +O3 +DAportable +z -Aa -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM
+CXXFLAGS = +O3 +DAportable +Z -Aa -D_HPUX_SOURCE
 
 APP_LIB_DEPS = -$(TOP)/$(LIB_DIR) -L/usr/lib/X11R6 -L/usr/contrib/X11R6/lib -lXext -lXmu -lXi -lX11 -lm

configs/hpux10-gcc

@@ -12,9 +12,5 @@ CFLAGS = -ansi -O3 -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/incl
 CXXFLAGS = -ansi -O3 -D_HPUX_SOURCE
 GLUT_CFLAGS = -fexceptions
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/lib/X11R6 -L/usr/contrib/X11R6/lib -lXext -lXmu -lXi -lX11 -lm
 

configs/hpux10-static

@@ -8,8 +8,8 @@ CONFIG_NAME = hpux10-static
 CC = cc
 CXX = aCC
 
-CFLAGS = -O +DAportable +z -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM
-CXXFLAGS = -O +DAportable +Z -Ae -D_HPUX_SOURCE
+CFLAGS = +O3 +DAportable +z -Aa -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM
+CXXFLAGS = +O3 +DAportable +Z -Aa -D_HPUX_SOURCE
 
 MKLIB_OPTIONS = -static
 

configs/hpux11-32

@@ -8,9 +8,9 @@ CONFIG_NAME = hpux11-32
 CC = cc
 CXX = aCC
 
-CFLAGS = +z -Ae -O +Onolimit -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
+CFLAGS = +z -Ae +O2 +Onolimit +Oaggressive -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
 
-CXXFLAGS = +z -Ae -O +Onolimit -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS
+CXXFLAGS = +z -Aa +O2 +Onolimit +Oaggressive -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS
 
 MKLIB_OPTIONS =
 

configs/hpux11-32-static

@@ -8,9 +8,9 @@ CONFIG_NAME = hpux11-32-static
 CC = cc
 CXX = aCC
 
-CFLAGS = -O +DA2.0 -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
+CFLAGS = +O3 +DA2.0 -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
 
-CXXFLAGS = -O +DA2.0 -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS
+CXXFLAGS = +O3 +DA2.0 -Aa -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS
 
 MKLIB_OPTIONS = -static
 

configs/hpux11-32-static-nothreads

@@ -8,9 +8,9 @@ CONFIG_NAME = hpux11-32-static
 CC = cc
 CXX = aCC
 
-CFLAGS = -O +DA2.0 -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM
+CFLAGS = +O3 +DA2.0 -Aa -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM
 
-CXXFLAGS = -O +DA2.0 -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include
+CXXFLAGS = +O3 +DA2.0 -Aa -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include
 
 MKLIB_OPTIONS = -static
 

configs/hpux11-64

@@ -8,9 +8,9 @@ CONFIG_NAME = hpux11-64
 CC = cc
 CXX = aCC
 
-CFLAGS = +z -Ae +DD64 -O +Onolimit -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
+CFLAGS = +z -Ae +DD64 +O2 +Onolimit +Oaggressive -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
 
-CXXFLAGS = +z -Ae +DD64 -O +Onolimit -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS
+CXXFLAGS = +z -Aa +DD64 +O2 +Onolimit +Oaggressive -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS
 
 MKLIB_OPTIONS =
 

configs/hpux11-64-static

@@ -8,9 +8,9 @@ CONFIG_NAME = hpux11-64-static
 CC = cc
 CXX = aCC
 
-CFLAGS = -O +DA2.0W -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
+CFLAGS = +O3 +DA2.0W -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
 
-CXXFLAGS = -O +DA2.0W -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS
+CXXFLAGS = +O3 +DA2.0W -Aa -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS
 
 MKLIB_OPTIONS = -static
 

configs/hpux11-ia64

@@ -8,9 +8,9 @@ CONFIG_NAME = hpux11-ia64
 CC = cc
 CXX = aCC
 
-CFLAGS = +z -Ae +DD64 -O +DSmckinley -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
+CFLAGS = +z -Ae +DD64 +O3 +DSmckinley -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
 
-CXXFLAGS = +z -Ae +DD64 -O +DSmckinley -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS
+CXXFLAGS = +z -Aa +DD64 +O3 +DSmckinley -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS
 
 MKLIB_OPTIONS =
 

configs/hpux11-ia64-static

@@ -8,9 +8,9 @@ CONFIG_NAME = hpux11-ia64-static
 CC = cc
 CXX = aCC
 
-CFLAGS = -O +DD64 -Ae -D_HPUX_SOURCE +DSmckinley -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
+CFLAGS = +O3 +DD64 -Aa -D_HPUX_SOURCE +DSmckinley -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
 
-CXXFLAGS = -O +DD64 -Ae -D_HPUX_SOURCE +DSmckinley -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS
+CXXFLAGS = +O3 +DD64 -Aa -D_HPUX_SOURCE +DSmckinley -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS
 
 MKLIB_OPTIONS = -static
 

configs/hpux9

@@ -9,8 +9,8 @@ CC = cc
 # XXX fix this
 CXX = c++
 
-CFLAGS = +z -O +Olibcalls +ESlit -Ae +Onolimit -D_HPUX_SOURCE -I/usr/include/X11R5 -DUSE_XSHM
-CXXFLAGS = +z -O +Olibcalls +ESlit -Ae +Onolimit -D_HPUX_SOURCE -I/usr/include/X11R5
+CFLAGS = +z +O3 +Olibcalls +ESlit -Aa +Onolimit -D_HPUX_SOURCE -I/usr/include/X11R5 -DUSE_XSHM
+CXXFLAGS = +z +O3 +Olibcalls +ESlit -Aa +Onolimit -D_HPUX_SOURCE -I/usr/include/X11R5
 
 APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/lib/X11R5 -s -Wl,+s,-B,nonfatal,-B,immediate -lXext -lXmu -lXi -lX11 -lm
 

configs/hpux9-gcc

@@ -8,7 +8,7 @@ CONFIG_NAME = hpux9-gcc
 CC = cc
 CXX = aCC
 
-CFLAGS = -O +DAportable +z -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM
-CXXFLAGS = -O +DAportable +Z -Ae -D_HPUX_SOURCE
+CFLAGS = +O3 +DAportable +z -Aa -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM
+CXXFLAGS = +O3 +DAportable +Z -Aa -D_HPUX_SOURCE
 
 APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/lib/X11R6 -L/usr/contrib/X11R6/lib -lXext -lXmu -lXi -lX11 -lm

configs/linux

@@ -17,8 +17,7 @@ PIC_FLAGS  = -fPIC
 ARCH_FLAGS ?=
 
 DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
-	-D_BSD_SOURCE -D_GNU_SOURCE \
-	-DPTHREADS -DUSE_XSHM -DHAVE_POSIX_MEMALIGN
+	-D_BSD_SOURCE -DPTHREADS -DUSE_XSHM
 
 X11_INCLUDES = -I/usr/X11R6/include
 
@@ -28,10 +27,6 @@ CFLAGS = -Wall -Wmissing-prototypes $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) \
 CXXFLAGS = -Wall $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \
 	$(X11_INCLUDES) 
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 GLUT_CFLAGS = -fexceptions
 
 EXTRA_LIB_PATH = -L/usr/X11R6/lib

configs/linux-alpha

@@ -11,10 +11,6 @@ CFLAGS = -O3 -mcpu=ev5 -ansi -mieee -pedantic -fPIC -D_XOPEN_SOURCE -DUSE_XSHM
 CXXFLAGS = -O3 -mcpu=ev5 -ansi -mieee -pedantic -fPIC -D_XOPEN_SOURCE
 GLUT_CFLAGS = -fexceptions
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread
 GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
 GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -L/usr/X11R6/lib -lXt -lX11

configs/linux-alpha-static

@@ -11,11 +11,7 @@ CFLAGS = -O3 -mcpu=ev5 -ansi -mieee -pedantic -D_XOPEN_SOURCE -DUSE_XSHM
 CXXFLAGS = -O3 -mcpu=ev5 -ansi -mieee -pedantic -D_XOPEN_SOURCE
 GLUT_CFLAGS = -fexceptions
 MKLIB_OPTIONS = -static
-PIC_FLAGS =
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
 
 # Library names (actual file names)
 GL_LIB_NAME = libGL.a

configs/linux-directfb

@@ -13,10 +13,6 @@ CFLAGS   = -Wall -O3 -ffast-math -fPIC -std=c99 -D_GNU_SOURCE -D_POSIX_SOURCE -D
 
 CXXFLAGS = -Wall -O3 -fPIC -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE   
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 HAVE_X86 = $(shell uname -m | grep 'i[3-6]86' >/dev/null && echo yes)
 ifeq ($(HAVE_X86), yes)
      CFLAGS   += -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM

configs/linux-dri

@@ -22,8 +22,7 @@ ARCH_FLAGS ?=
 DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
 	-D_BSD_SOURCE -D_GNU_SOURCE \
 	-DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 -DIN_DRI_DRIVER \
-	-DGLX_DIRECT_RENDERING -DGLX_INDIRECT_RENDERING \
-	-DHAVE_ALIAS -DHAVE_POSIX_MEMALIGN
+	-DGLX_DIRECT_RENDERING -DHAVE_ALIAS
 
 X11_INCLUDES = -I/usr/X11R6/include
 
@@ -32,22 +31,16 @@ CFLAGS = -Wall -Wmissing-prototypes -std=c99 -ffast-math \
 
 CXXFLAGS = -Wall $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
 
-GLUT_CFLAGS = -fexceptions
-
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
 
 ASM_SOURCES = 
 
 # Library/program dependencies
 EXTRA_LIB_PATH=-L/usr/X11R6/lib
 
-LIBDRM_CFLAGS = `pkg-config --cflags libdrm`
 LIBDRM_LIB = `pkg-config --libs libdrm`
 DRI_LIB_DEPS  = $(EXTRA_LIB_PATH) -lm -lpthread -lexpat -ldl $(LIBDRM_LIB)
-GL_LIB_DEPS   = $(EXTRA_LIB_PATH) -lX11 -lXext -lXxf86vm -lXdamage -lXfixes \
-		-lm -lpthread -ldl $(LIBDRM_LIB)
+GL_LIB_DEPS   = $(EXTRA_LIB_PATH) -lX11 -lXext -lXxf86vm -lm -lpthread -ldl \
+                $(LIBDRM_LIB)
 
 
 # This is now 0 by default since it seems to confuse the hell out of people
@@ -59,10 +52,10 @@ USING_EGL=0
 # Directories
 ifeq ($(USING_EGL), 1)
 SRC_DIRS = egl glx/x11 mesa glu glut/glx glw
-PROGRAM_DIRS = egl xdemos
+PROGRAM_DIRS = egl
 else
 SRC_DIRS = glx/x11 mesa glu glut/glx glw
-PROGRAM_DIRS = xdemos
+PROGRAM_DIRS =
 endif
 
 DRIVER_DIRS = dri
@@ -70,5 +63,5 @@ WINDOW_SYSTEM=dri
 
 # gamma are missing because they have not been converted to use the new
 # interface.
-DRI_DIRS = i810 i915 i965 mach64 mga r128 r200 r300 radeon s3v \
+DRI_DIRS = i810 i915 mach64 mga r128 r200 r300 radeon s3v \
 	savage sis tdfx trident unichrome ffb

configs/linux-dri-debug

@@ -1,16 +0,0 @@
-# -*-makefile-*-
-# Configuration for linux-dri-debug: Linux DRI hardware drivers for XFree86 & others
-
-include $(TOP)/configs/linux-dri
-
-CONFIG_NAME = linux-dri-debug
-OPT_FLAGS  = -O0 -g
-ARCH_FLAGS = -DDEBUG
-
-# Helpful to reduce the amount of stuff that gets built sometimes:
-#DRI_DIRS = i915tex i915 
-#DRI_DIRS = i965
-#DRI_DIRS = radeon r200 r300
-#DRI_DIRS = unichrome sis trident
-#DRI_DIRS = i810 mga r128 tdfx
-

configs/linux-dri-x86

@@ -5,6 +5,9 @@ include $(TOP)/configs/linux-dri
 
 CONFIG_NAME = linux-dri-x86
 
+# Unnecessary on x86, generally.
+PIC_FLAGS = 
+
 # Add -m32 to CFLAGS:
 ARCH_FLAGS = -m32
 

configs/linux-dri-x86-64

@@ -20,5 +20,5 @@ EXTRA_LIB_PATH=-L/usr/X11R6/lib64
 # the new interface.  i810 are missing because there is no x86-64
 # system where they could *ever* be used.
 #
-DRI_DIRS = i915 i965 mach64 mga r128 r200 r300 radeon savage tdfx unichrome
+DRI_DIRS = i915 mach64 mga r128 r200 radeon tdfx unichrome savage r300
 

configs/linux-dri-xcb

@@ -22,31 +22,25 @@ ARCH_FLAGS ?=
 DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
 	-D_BSD_SOURCE -D_GNU_SOURCE \
 	-DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 -DIN_DRI_DRIVER \
-	-DGLX_DIRECT_RENDERING -DGLX_INDIRECT_RENDERING \
-        -DHAVE_ALIAS -DUSE_XCB -DHAVE_POSIX_MEMALIGN
+	-DGLX_DIRECT_RENDERING -DHAVE_ALIAS -DUSE_XCB
 
-X11_INCLUDES = `pkg-config --cflags-only-I x11` `pkg-config --cflags-only-I xcb` `pkg-config --cflags-only-I x11-xcb` `pkg-config --cflags-only-I xcb-glx`
+X11_INCLUDES = `pkg-config --cflags-only-I x11` `pkg-config --cflags-only-I xcb` `pkg-config --cflags-only-I xcb-glx`
 
 CFLAGS = -Wall -Wmissing-prototypes $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) \
 	$(DEFINES) $(ASM_FLAGS) -std=c99 -ffast-math 
 
 CXXFLAGS = -Wall $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
 
 ASM_SOURCES = 
 
 # Library/program dependencies
 EXTRA_LIB_PATH=`pkg-config --libs-only-L x11`
 
-LIBDRM_CFLAGS = `pkg-config --cflags libdrm`
 LIBDRM_LIB = `pkg-config --libs libdrm`
 DRI_LIB_DEPS  = $(EXTRA_LIB_PATH) -lm -lpthread -lexpat -ldl $(LIBDRM_LIB)
-GL_LIB_DEPS   = $(EXTRA_LIB_PATH) -lX11 -lXext -lXxf86vm -lXdamage -lXfixes \
-		-lm -lpthread -ldl $(LIBDRM_LIB) `pkg-config --libs xcb` \
-		`pkg-config --libs x11-xcb` `pkg-config --libs xcb-glx`
+GL_LIB_DEPS   = $(EXTRA_LIB_PATH) -lX11 -lXext -lXxf86vm -lm -lpthread -ldl \
+                $(LIBDRM_LIB) `pkg-config --libs xcb` `pkg-config --libs xcb-glx`
 
 
 # This is now 0 by default since it seems to confuse the hell out of people
@@ -58,10 +52,10 @@ USING_EGL=0
 # Directories
 ifeq ($(USING_EGL), 1)
 SRC_DIRS = egl glx/x11 mesa glu glut/glx glw
-PROGRAM_DIRS = egl xdemos
+PROGRAM_DIRS = egl
 else
 SRC_DIRS = glx/x11 mesa glu glut/glx glw
-PROGRAM_DIRS = xdemos
+PROGRAM_DIRS =
 endif
 
 DRIVER_DIRS = dri
@@ -70,4 +64,4 @@ WINDOW_SYSTEM=dri
 # gamma are missing because they have not been converted to use the new
 # interface.
 DRI_DIRS = i810 i915 mach64 mga r128 r200 r300 radeon s3v \
-	savage sis tdfx trident unichrome ffb 
+	savage sis tdfx trident unichrome ffb

configs/linux-fbdev

@@ -3,17 +3,8 @@
 include $(TOP)/configs/linux
 
 CONFIG_NAME = linux-fbdev
+DRIVER_DIRS = fbdev
 
-CFLAGS = -O3 -ffast-math -ansi -pedantic -fPIC -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DPTHREADS -DUSE_GLFBDEV_DRIVER
-
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-
-SRC_DIRS = mesa glu glut/fbdev
-DRIVER_DIRS = fbdev osmesa
-PROGRAM_DIRS = fbdev demos redbook samples
-
-GL_LIB_DEPS = $(EXTRA_LIB_PATH) -lm -lpthread
-OSMESA_LIB_DEPS = -lm -lpthread
-GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) $(EXTRA_LIB_PATH) -lgpm -lm
+CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS -DUSE_GLFBDEV_DRIVER
 
+PROGRAM_DIRS = fbdev

configs/linux-glide

@@ -12,9 +12,6 @@ CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE
 CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
 GLUT_CFLAGS = -fexceptions
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
 
 # Library/program dependencies
 GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -L/usr/local/glide/lib -lglide3x -lm -lpthread

configs/linux-indirect

@@ -23,8 +23,7 @@ ARCH_FLAGS ?=
 
 DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
 	-D_BSD_SOURCE -D_GNU_SOURCE \
-	-DGLX_INDIRECT_RENDERING \
-	-DPTHREADS -DHAVE_ALIAS -DHAVE_POSIX_MEMALIGN
+	-DPTHREADS -DHAVE_ALIAS
 
 X11_INCLUDES = -I/usr/X11R6/include
 
@@ -33,9 +32,6 @@ CFLAGS   = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \
 
 CXXFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
 
 ASM_SOURCES = 
 

configs/linux-osmesa

@@ -12,9 +12,6 @@ CXX = g++
 CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DPTHREADS
 CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
 
 # Directories
 SRC_DIRS = mesa glu
@@ -25,4 +22,4 @@ PROGRAM_DIRS = osdemos
 # Dependencies
 OSMESA_LIB_DEPS = -lm -lpthread
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
-APP_LIB_DEPS = -lm -lpthread
+APP_LIB_DEPS = -lOSMesa -lGLU

configs/linux-osmesa16

@@ -10,9 +10,6 @@ CXX = g++
 CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS -I/usr/X11R6/include -DCHAN_BITS=16 -DDEFAULT_SOFTWARE_DEPTH_BITS=31
 CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
 
 # Library names
 OSMESA_LIB = OSMesa16
@@ -28,4 +25,4 @@ PROGRAM_DIRS =
 # Dependencies
 OSMESA_LIB_DEPS = -lm -lpthread
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
-APP_LIB_DEPS = -lm -lpthread
+APP_LIB_DEPS = -lOSMesa16

configs/linux-osmesa16-static

@@ -10,11 +10,7 @@ CXX = g++
 CFLAGS = -O3 -ansi -pedantic -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS -I/usr/X11R6/include -DCHAN_BITS=16 -DDEFAULT_SOFTWARE_DEPTH_BITS=31
 CXXFLAGS = -O3 -ansi -pedantic -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
 MKLIB_OPTIONS = -static
-PIC_FLAGS =
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
 
 # Library names
 OSMESA_LIB = OSMesa16
@@ -29,4 +25,4 @@ PROGRAM_DIRS =
 
 # Dependencies
 OSMESA_LIB_DEPS = -lm -lpthread
-APP_LIB_DEPS = -lm -lpthread
+APP_LIB_DEPS = -lOSMesa16

configs/linux-osmesa32

@@ -10,9 +10,6 @@ CXX = g++
 CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS -I/usr/X11R6/include -DCHAN_BITS=32 -DDEFAULT_SOFTWARE_DEPTH_BITS=31
 CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
 
 # Library names
 OSMESA_LIB = OSMesa32
@@ -28,4 +25,4 @@ PROGRAM_DIRS =
 # Dependencies
 OSMESA_LIB_DEPS = -lm -lpthread
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
-APP_LIB_DEPS = -lm -lpthread
+APP_LIB_DEPS = -lOSMesa32

configs/linux-ppc-static

@@ -5,7 +5,6 @@ include $(TOP)/configs/linux-ppc
 CONFIG_NAME = linux-ppc-static
 
 MKLIB_OPTIONS = -static
-PIC_FLAGS =
 
 # Library names (actual file names)
 GL_LIB_NAME = libGL.a

configs/linux-solo

@@ -15,31 +15,20 @@ PIC_FLAGS  = -fPIC
 # Add '-DGLX_USE_TLS' to ARCH_FLAGS to enable TLS support.
 ARCH_FLAGS ?=
 
-# DRM and pciaccess
-LIBDRM_CFLAGS = `pkg-config --cflags libdrm`
-LIBDRM_LIB = `pkg-config --libs libdrm`
-PCIACCESS_CFLAGS = `pkg-config --cflags pciaccess`
-PCIACCESS_LIB = `pkg-config --libs pciaccess`
-
-
 DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
-	-D_BSD_SOURCE -D_GNU_SOURCE -DHAVE_POSIX_MEMALIGN \
-	-DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 -DIN_DRI_DRIVER \
-	-DHAVE_ALIAS
+	-D_BSD_SOURCE -D_GNU_SOURCE \
+	-DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 -DDRM_USE_MALLOC -DIN_DRI_DRIVER
 
 CFLAGS   = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \
 	$(ASM_FLAGS) -std=c99 -ffast-math 
 
 CXXFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
 
 ASM_SOURCES = 
 
 # Library/program dependencies
-DRI_LIB_DEPS = -lm -lpthread -lexpat -ldl -L$(TOP)/$(LIB_DIR) $(PCIACCESS_LIB)
+DRI_LIB_DEPS = -lm -lpthread -lexpat -ldl -L$(TOP)/$(LIB_DIR) 
 GL_LIB_DEPS = -lm -lpthread -ldl
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lm
 GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -lm
@@ -50,5 +39,5 @@ SRC_DIRS = glx/mini mesa glu glut/mini
 DRIVER_DIRS = dri
 PROGRAM_DIRS = miniglx
 
-#DRI_DIRS = ffb gamma sis savage tdfx unichrome fb
-DRI_DIRS = i810 i915tex i915 mach64 mga r128 r200 radeon
+#DRI_DIRS = ffb gamma sis savage
+DRI_DIRS = i810 i915 mach64 mga r128 r200 radeon tdfx unichrome fb

configs/linux-solo-x86

@@ -5,6 +5,9 @@ include $(TOP)/configs/linux-solo
 
 CONFIG_NAME = linux-solo-x86
 
+# Unnecessary on x86, generally.
+PIC_FLAGS = 
+
 ASM_FLAGS = -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM
 ASM_SOURCES = $(X86_SOURCES)
 ASM_API = $(X86_API)

configs/linux-sparc

@@ -1,9 +1,30 @@
 # Configuration for Linux on Sparc
 
-include $(TOP)/configs/linux
+include $(TOP)/configs/default
 
 CONFIG_NAME = linux-sparc
 
-#ASM_FLAGS = -DUSE_SPARC_ASM
-#ASM_SOURCES = $(SPARC_SOURCES)
-#ASM_API = $(SPARC_API)
+# Compiler and flags
+CC = gcc
+CXX = g++
+
+WARN_FLAGS = -Wall
+OPT_FLAGS  = -O2
+PIC_FLAGS  = -fPIC
+
+DEFINES = -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM
+
+X11_INCLUDES = -I/usr/X11R6/include
+
+CFLAGS   = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \
+	$(ASM_FLAGS) -std=c99 -ffast-math 
+
+CXXFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
+
+GLUT_CFLAGS = -fexceptions
+
+EXTRA_LIB_PATH=-L/usr/X11R6/lib
+
+GL_LIB_DEPS = $(EXTRA_LIB_PATH) -lX11 -lXext -lm -lpthread
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) $(EXTRA_LIB_PATH) -lX11 -lXmu -lXt -lXi -lm
+GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) $(EXTRA_LIB_PATH) -lXt -lX11

configs/linux-sparc5

@@ -1,7 +1,17 @@
 # Configuration for Linux on Sparc5
 
-include $(TOP)/configs/linux-sparc
+include $(TOP)/configs/default
 
 CONFIG_NAME = linux-sparc5
 
-ARCH_FLAGS += -mcpu=ultrasparc
+# Compiler and flags
+CC = gcc
+CXX = g++
+CFLAGS = -mcpu=ultrasparc -O2 -ffast-math -ansi -pedantic -fPIC -D_SVID_SOURCE -D_BSD_SOURCE -I/usr/X11R6/include -DUSE_XSHM
+CXXFLAGS = -mcpu=ultrasparc -O2 -ffast-math -ansi -pedantic -fPIC -D_SVID_SOURCE -D_BSD_SOURCE
+GLUT_CFLAGS = -fexceptions
+
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
+GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -L/usr/X11R6/lib -lXt -lX11
+

configs/linux-static

@@ -5,7 +5,6 @@ include $(TOP)/configs/linux
 CONFIG_NAME = linux-static
 
 MKLIB_OPTIONS = -static
-PIC_FLAGS =
 
 # Library names (actual file names)
 GL_LIB_NAME = libGL.a
@@ -20,7 +19,3 @@ OSMESA_LIB_DEPS =
 GLU_LIB_DEPS = 
 GLUT_LIB_DEPS = 
 GLW_LIB_DEPS = 
-
-# Need to specify all libraries we may need
-APP_LIB_DEPS = $(EXTRA_LIB_PATH) -lX11 -lXext -lXmu -lXt -lXi -lpthread \
-	-lstdc++ -lm

configs/linux-ultrasparc

@@ -1,7 +1,17 @@
 # Configuration for Linux on UltraSparc
 
-include $(TOP)/configs/linux-sparc
+include $(TOP)/configs/default
 
 CONFIG_NAME = linux-ultrasparc
 
-ARCH_FLAGS += -mv8 -mtune=ultrasparc
+# Compiler and flags
+CC = gcc
+CXX = g++
+CFLAGS = -mv8 -O2 -mtune=ultrasparc -ansi -pedantic -fPIC -D_SVID_SOURCE -D_BSD_SOURCE -I/usr/X11R6/include -DUSE_XSHM
+CXXFLAGS = -mv8 -O2 -mtune=ultrasparc -ansi -pedantic -fPIC -D_SVID_SOURCE -D_BSD_SOURCE
+GLUT_CFLAGS = -fexceptions
+
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
+GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -L/usr/X11R6/lib -lXt -lX11
+APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR)-l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm

configs/linux-x86-64-static

@@ -5,7 +5,6 @@ include $(TOP)/configs/linux-x86-64
 CONFIG_NAME = linux-x86-64-static
 
 MKLIB_OPTIONS = -static
-PIC_FLAGS =
 
 # Library names (actual file names)
 GL_LIB_NAME = libGL.a
@@ -20,5 +19,5 @@ OSMESA_LIB_DEPS =
 GLU_LIB_DEPS = 
 GLUT_LIB_DEPS = 
 GLW_LIB_DEPS = 
-APP_LIB_DEPS = $(EXTRA_LIB_PATH) -lX11 -lXext -lXmu -lXt -lXi -lpthread \
-	-lstdc++ -lm
+APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) \
+               $(EXTRA_LIB_PATH) -lX11 -lXmu -lXt -lXi -lpthread -lstdc++ -lm

configs/linux-x86-glide

@@ -14,9 +14,6 @@ CXXFLAGS = -Wall -O3 -ansi -pedantic -fPIC -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199
 
 GLUT_CFLAGS = -fexceptions
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
 
 ASM_SOURCES = $(X86_SOURCES)
 ASM_API = $(X86_API)

configs/linux-x86-static

@@ -5,7 +5,6 @@ include $(TOP)/configs/linux-x86
 CONFIG_NAME = linux-x86-static
 
 MKLIB_OPTIONS = -static
-PIC_FLAGS =
 
 # Library names (actual file names)
 GL_LIB_NAME = libGL.a
@@ -20,5 +19,5 @@ OSMESA_LIB_DEPS =
 GLU_LIB_DEPS = 
 GLUT_LIB_DEPS = 
 GLW_LIB_DEPS = 
-APP_LIB_DEPS = $(EXTRA_LIB_PATH) -lX11 -lXext -lXmu -lXt -lXi -lpthread \
-	-lstdc++ -lm
+APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) \
+               $(EXTRA_LIB_PATH) -lX11 -lXmu -lXt -lXi -lpthread -lstdc++ -lm

configs/netbsd

@@ -12,6 +12,3 @@ CXXFLAGS = -O2 -fPIC
 GLUT_CFLAGS = -fexceptions
 APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/X11R6/lib -lXext -lXmu -lXi -lX11 -lm
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing

configs/openbsd

@@ -10,10 +10,6 @@ CXX = g++
 CFLAGS = -O2 -fPIC -I/usr/X11R6/include -DUSE_XSHM -DHZ=100
 CXXFLAGS = -O2 -fPIC -I/usr/X11R6/include -DHZ=100
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm
 OSMESA_LIB_DEPS = -lm
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB)

configs/solaris-x86-gcc

@@ -11,10 +11,6 @@ CFLAGS = -O3 -march=i486 -fPIC -I/usr/openwin/include -DUSE_XSHM
 CXXFLAGS = -O3 -march=i486 -fPIC
 GLUT_CFLAGS = -fexceptions
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 GL_LIB_DEPS = -L/usr/openwin/lib -lX11 -lXext -lm -lpthread
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lm
 GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/openwin/lib -lX11 -lXmu -lXt -lXi -lm

configs/solaris-x86-gcc-static

@@ -12,10 +12,6 @@ CXXFLAGS = -O3 -march=i486 -fPIC
 GLUT_CFLAGS = -fexceptions
 MKLIB_OPTIONS = -static
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 GL_LIB_DEPS = -L/usr/openwin/lib -lX11 -lXext -lm -lpthread
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lm
 GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/openwin/lib -lX11 -lXmu -lXt -lXi -lm

configs/sunos4-gcc

@@ -11,9 +11,5 @@ CFLAGS = -fPIC -O3 -I/usr/openwin/include -I/usr/include/X11R5 -I/usr/include/X1
 CXXFLAGS = -fPIC -O3 -I/usr/openwin/include -DSUNOS4
 GLUT_CFLAGS = -fexceptions -DSOLARIS_2_4_BUG
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/openwin/lib -lX11 -lXext -lXmu -lXi -lm
 

configs/sunos5-gcc

@@ -28,10 +28,6 @@ CXXFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \
 
 GLUT_CFLAGS = -fexceptions -DSOLARIS_2_4_BUG
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 # Library/program dependencies
 EXTRA_LIB_PATH=-L/usr/openwin/lib
 

configs/sunos5-v9-cc-g++

@@ -1,35 +0,0 @@
-# Configuration for SunOS 5, SPARC V9 and cc/g++ (for C and C++ sources)
-
-include $(TOP)/configs/default
-
-CONFIG_NAME = sunos5-v9-cc-g++
-
-MKLIB_OPTIONS = -cplusplus
-
-LIB_DIR = lib64
-
-# Compiler and flags
-CC = cc
-CXX = g++
-
-CXX_WARN_FLAGS = -Wall
-CXX_PIC_FLAGS  = -fPIC
-CXX_OPT_FLAGS  = -O3 -m64 -mcpu=ultrasparc -mv8plus -mvis -g -fomit-frame-pointer -pipe
-CXX_ARCH_FLAGS = -m64
-
-
-CXXFLAGS = $(CXX_WARN_FLAGS) $(CXX_OPT_FLAGS) $(CXX_PIC_FLAGS) $(CXX_ARCH_FLAGS) $(DEFINES) \
-        -I/usr/openwin/include
-
-# Work around aliasing bugs - developers should comment this out
-CXXFLAGS += -fno-strict-aliasing
-
-CFLAGS = -xarch=v9 -KPIC -O -I/usr/openwin/include -I/usr/dt/include -DUSE_XSHM -DPTHREADS
-#CXXFLAGS = -xarch=v9 -KPIC -O -I/usr/openwin/include -I/usr/dt/include -DPTHREADS
-GLUT_CFLAGS = -DSOLARIS_2_4_BUG
-
-GL_LIB_DEPS = -L/usr/openwin/lib -L/usr/dt/lib -lX11 -lXext -lXmu -lXi -lm -lpthread
-GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lm -lCstd -lCrun
-GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -lm
-GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -L/usr/openwin/lib -lXt -lX11
-APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -lX11 -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm

configs/ultrix-gcc

@@ -12,10 +12,6 @@ CXXFLAGS = -pedantic -O2
 GLUT_CFLAGS = -fexceptions
 MKLIB_OPTIONS = -static
 
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 GL_LIB_NAME = libGL.a
 GLU_LIB_NAME = libGLU.a
 GLUT_LIB_NAME = libglut.a

descrip.mms

@@ -19,4 +19,4 @@ all :
 	$(MMS)$(MMSQUALIFIERS)
 	set default [-.xdemos]
 	$(MMS)$(MMSQUALIFIERS)
-	if f$search("[-]tests.DIR") .nes. "" then pipe set default [-.tests] ; $(MMS)$(MMSQUALIFIERS)
+	if f$search("[-]test.DIR") .nes. "" then pipe set default [-.test] ; $(MMS)$(MMSQUALIFIERS)

docs/MESA_texture_array.spec

@@ -1,805 +0,0 @@
-Name
-
-    MESA_texture_array
-
-Name Strings
-
-    GL_MESA_texture_array
-
-Contact
-
-    Ian Romanick, IBM (idr 'at' us.ibm.com)
-
-IP Status
-
-    No known IP issues.
-
-Status
-
-    Shipping in Mesa 7.1
-
-Version
-
-    $Date: 2007/05/16$ $Revision: 0.4$
-
-Number
-
-    TBD
-
-Dependencies
-
-    OpenGL 1.2 or GL_EXT_texture3D is required.
-
-    Support for ARB_fragment_program is assumed, but not required.
-
-    Support for ARB_fragment_program_shadow is assumed, but not required.
-
-    Support for EXT_framebuffer_object is assumed, but not required.
-
-    Written based on the wording of the OpenGL 2.0 specification and
-    ARB_fragment_program_shadow but not dependent on them.
-
-Overview
-
-    There are a number of circumstances where an application may wish to
-    blend two textures out of a larger set of textures.  Moreover, in some
-    cases the selected textures may vary on a per-fragment basis within
-    a polygon.  Several examples include:
-
-       1. High dynamic range textures.  The application stores several
-       different "exposures" of an image as different textures.  On a
-       per-fragment basis, the application selects which exposures are
-       used.
-
-       2. A terrain engine where the altitude of a point determines the
-       texture applied to it.  If the transition is from beach sand to
-       grass to rocks to snow, the application will store each texture
-       in a different texture map, and dynamically select which two
-       textures to blend at run-time.
-
-       3. Storing short video clips in textures.  Each depth slice is a
-       single frame of video.
-
-    Several solutions to this problem have been proposed, but they either
-    involve using a separate texture unit for each texture map or using 3D
-    textures without mipmaps.  Both of these options have major drawbacks.
-
-    This extension provides a third alternative that eliminates the major
-    drawbacks of both previous methods.  A new texture target,
-    TEXTURE_2D_ARRAY, is added that functions identically to TEXTURE_3D in
-    all aspects except the sizes of the non-base level images.  In
-    traditional 3D texturing, the size of the N+1 LOD is half the size
-    of the N LOD in all three dimensions.  For the TEXTURE_2D_ARRAY target,
-    the height and width of the N+1 LOD is halved, but the depth is the
-    same for all levels of detail. The texture then becomes an array of
-    2D textures.  The per-fragment texel is selected by the R texture
-    coordinate.
-
-    References:
-
-        http://www.opengl.org/discussion_boards/cgi_directory/ultimatebb.cgi?ubb=get_topic;f=3;t=011557
-        http://www.opengl.org/discussion_boards/cgi_directory/ultimatebb.cgi?ubb=get_topic;f=3;t=000516
-        http://www.opengl.org/discussion_boards/cgi_directory/ultimatebb.cgi?ubb=get_topic;f=3;t=011903
-        http://www.delphi3d.net/articles/viewarticle.php?article=terraintex.htm
-
-New Procedures and Functions
-
-    All functions come directly from EXT_texture_array.
-
-    void FramebufferTextureLayerEXT(enum target, enum attachment,
-                                    uint texture, int level, int layer);
-
-New Tokens
-
-    All token names and values come directly from EXT_texture_array.
-
-    Accepted by the <cap> parameter of Enable, Disable, and IsEnabled, by
-    the <pname> parameter of GetBooleanv, GetIntegerv, GetFloatv, and
-    GetDoublev, and by the <target> parameter of TexImage3D, GetTexImage,
-    GetTexLevelParameteriv, GetTexLevelParameterfv, GetTexParameteriv, and
-    GetTexParameterfv:
-
-        TEXTURE_1D_ARRAY_EXT                            0x8C18
-        TEXTURE_2D_ARRAY_EXT                            0x8C1A
-
-    Accepted by the <target> parameter of TexImage2D, TexSubImage2D,
-    CopyTexImage2D, CopyTexSubImage2D, CompressedTexImage2D,
-    CompressedTexSubImage2D, GetTexLevelParameteriv, and 
-    GetTexLevelParameterfv:
-
-        TEXTURE_1D_ARRAY_EXT
-        PROXY_TEXTURE_1D_ARRAY_EXT                      0x8C19
-
-    Accepted by the <target> parameter of TexImage3D, TexSubImage3D,
-    CopyTexSubImage3D, CompressedTexImage3D, CompressedTexSubImage3D,
-    GetTexLevelParameteriv, and GetTexLevelParameterfv:
-
-        TEXTURE_2D_ARRAY_EXT
-        PROXY_TEXTURE_2D_ARRAY_EXT                      0x8C1B
-
-    Accepted by the <pname> parameter of GetBooleanv, GetIntegerv,
-    GetFloatv, and GetDoublev
-
-        TEXTURE_BINDING_1D_ARRAY_EXT                    0x8C1C
-        TEXTURE_BINDING_2D_ARRAY_EXT                    0x8C1D
-        MAX_ARRAY_TEXTURE_LAYERS_EXT                    0x88FF
-
-    Accepted by the <param> parameter of TexParameterf, TexParameteri,
-    TexParameterfv, and TexParameteriv when the <pname> parameter is
-    TEXTURE_COMPARE_MODE_ARB:
-
-        COMPARE_REF_DEPTH_TO_TEXTURE_EXT                0x884E
-
-    (Note:  COMPARE_REF_DEPTH_TO_TEXTURE_EXT is simply an alias for the
-    existing COMPARE_R_TO_TEXTURE token in OpenGL 2.0; the alternate name
-    reflects the fact that the R coordinate is not always used.)
-
-    Accepted by the <internalformat> parameter of TexImage3D and
-    CompressedTexImage3D, and by the <format> parameter of
-    CompressedTexSubImage3D:
-
-        COMPRESSED_RGB_S3TC_DXT1_EXT
-        COMPRESSED_RGBA_S3TC_DXT1_EXT
-        COMPRESSED_RGBA_S3TC_DXT3_EXT
-        COMPRESSED_RGBA_S3TC_DXT5_EXT
-
-    Accepted by the <pname> parameter of
-    GetFramebufferAttachmentParameterivEXT:
-
-        FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER_EXT          0x8CD4
-
-    (Note:  FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER is simply an alias for the
-    FRAMEBUFFER_ATTACHMENT_TEXTURE_3D_ZOFFSET_EXT token provided in
-    EXT_framebuffer_object.  This extension generalizes the notion of
-    "<zoffset>" to include layers of an array texture.)
-
-Additions to Chapter 2 of the OpenGL 2.0 Specification (OpenGL Operation)
-
-    None
-
-Additions to Chapter 3 of the OpenGL 2.0 Specification (Rasterization)
-
-    -- Section 3.8.1 "Texture Image Specification"
-
-       Change the first paragraph (page 150) to say (spec changes identical to
-       EXT_texture_array):
-
-       "The command
-
-         void TexImage3D(enum target, int level, int internalformat,
-                         sizei width, sizei height, sizei depth, int border,
-                         enum format, enum type, void *data);
-
-       is used to specify a three-dimensional texture image. target must be one
-       one of TEXTURE_3D for a three-dimensional texture or
-       TEXTURE_2D_ARRAY_EXT for an two-dimensional array texture.
-       Additionally, target may be either PROXY_TEXTURE_3D for a
-       three-dimensional proxy texture, or PROXY_TEXTURE_2D_ARRAY_EXT for a
-       two-dimensional proxy array texture."
-
-       Change the fourth paragraph on page 151 to say (spec changes identical
-       to EXT_texture_array):
-
-       "Textures with a base internal format of DEPTH_COMPONENT are supported
-       by texture image specification commands only if target is TEXTURE_1D,
-       TEXTURE_2D, TEXTURE_1D_ARRAY_EXT, TEXTURE_2D_ARRAY_EXT,
-       PROXY_TEXTURE_1D, PROXY_TEXTURE_2D, PROXY_TEXTURE_1D_ARRAY_EXT, or
-       PROXY_TEXTURE_2D_ARRAY_EXT. Using this format in conjunction with any
-       other target will result in an INVALID_OPERATION error."
-
-
-       Change the fourth paragraph on page 156 to say (spec changes identical
-       to EXT_texture_array):
-       
-       "The command
-
-         void TexImage2D(enum target, int level,
-                         int internalformat, sizei width, sizei height,
-                         int border, enum format, enum type, void *data);
-
-       is used to specify a two-dimensional texture image. target must be one
-       of TEXTURE_2D for a two-dimensional texture, TEXTURE_1D_ARRAY_EXT for a
-       one-dimensional array texture, or one of TEXTURE_CUBE_MAP_POSITIVE_X,
-       TEXTURE_CUBE_MAP_NEGATIVE_X, TEXTURE_CUBE_MAP_POSITIVE_Y,
-       TEXTURE_CUBE_MAP_NEGATIVE_Y, TEXTURE_CUBE_MAP_POSITIVE_Z, or
-       TEXTURE_CUBE_MAP_NEGATIVE_Z for a cube map texture. Additionally,
-       target may be either PROXY_TEXTURE_2D for a two-dimensional proxy
-       texture, PROXY_TEXTURE_1D_ARRAY_EXT for a one-dimensional proxy array
-       texture, or PROXY TEXTURE_CUBE_MAP for a cube map proxy texture in the
-       special case discussed in section 3.8.11.  The other parameters match
-       the corresponding parameters of TexImage3D.
-
-       For the purposes of decoding the texture image, TexImage2D is
-       equivalent to calling TexImage3D with corresponding arguments and depth
-       of 1, except that
-
-         * The border depth, d_b, is zero, and the depth of the image is
-           always 1 regardless of the value of border. 
-
-         * The border height, h_b, is zero if <target> is
-           TEXTURE_1D_ARRAY_EXT, and <border> otherwise.
-
-         * Convolution will be performed on the image (possibly changing its
-           width and height) if SEPARABLE 2D or CONVOLUTION 2D is enabled.
-
-         * UNPACK SKIP IMAGES is ignored."
-
-    -- Section 3.8.2 "Alternate Texture Image Specification Commands"
-
-       Change the second paragraph (page 159) (spec changes identical
-       to EXT_texture_array):
-
-       "The command
-
-         void CopyTexImage2D(enum target, int level,
-                             enum internalformat, int x, int y, sizei width,
-                             sizei height, int border);
-
-       defines a two-dimensional texture image in exactly the manner of
-       TexImage2D, except that the image data are taken from the framebuffer
-       rather than from client memory. Currently, target must be one of
-       TEXTURE_2D, TEXTURE_1D_ARRAY_EXT, TEXTURE_CUBE_MAP_POSITIVE_X,
-       TEXTURE_CUBE_MAP_NEGATIVE_X, TEXTURE_CUBE MAP_POSITIVE_Y,
-       TEXTURE_CUBE_MAP_NEGATIVE_Y, TEXTURE_CUBE_MAP_POSITIVE_Z, or
-       TEXTURE_CUBE_MAP_NEGATIVE_Z.
-
-
-       Change the last paragraph on page 160 to say (spec changes identical
-       to EXT_texture_array):
-
-       "Currently the target arguments of TexSubImage1D and CopyTexSubImage1D
-       must be TEXTURE_1D, the target arguments of TexSubImage2D and
-       CopyTexSubImage2D must be one of TEXTURE_2D, TEXTURE_1D_ARRAY_EXT,
-       TEXTURE_CUBE_MAP_POSITIVE_X, TEXTURE_CUBE_MAP_NEGATIVE_X,
-       TEXTURE_CUBE_MAP_POSITIVE_Y, TEXTURE_CUBE_MAP_NEGATIVE_Y,
-       TEXTURE_CUBE_MAP_POSITIVE_Z, or TEXTURE_CUBE_MAP_NEGATIVE_Z, and the
-       target arguments of TexSubImage3D and CopyTexSubImage3D must be
-       TEXTURE_3D or TEXTURE_2D_ARRAY_EXT. ..."
-
-
-    -- Section 3.8.4 "Texture Parameters"
-
-       Change the first paragraph (page 166) to say:
-
-       "Various parameters control how the texel array is treated when
-       specified or changed, and when applied to a fragment. Each parameter is
-       set by calling
-
-         void TexParameter{if}(enum target, enum pname, T param); 
-         void TexParameter{if}v(enum target, enum pname, T params);
-
-       target is the target, either TEXTURE_1D, TEXTURE_2D, TEXTURE_3D,
-       TEXTURE_CUBE_MAP, TEXTURE_1D_ARRAY_EXT, or TEXTURE_2D_ARRAY_EXT."
-
-
-    -- Section 3.8.8 "Texture Minification" in the section "Scale Factor and Level of Detail"
-
-       Change the first paragraph (page 172) to say:
-
-       "Let s(x,y) be the function that associates an s texture coordinate
-       with each set of window coordinates (x,y) that lie within a primitive;
-       define t(x,y) and r(x,y) analogously.  Let u(x,y) = w_t * s(x,y),
-       v(x,y) = h_t * t(x,y), and w(x,y) = d_t * r(x,y), where w_t, h_t,
-       and d_t are as defined by equations 3.15, 3.16, and 3.17 with
-       w_s, h_s, and d_s equal to the width, height, and depth of the
-       image array whose level is level_base.  For a one-dimensional
-       texture or a one-dimensional array texture, define v(x,y) = 0 and
-       w(x,y) = 0; for a two-dimensional texture or a two-dimensional array
-       texture, define w(x,y) = 0..."
-
-    -- Section 3.8.8 "Texture Minification" in the section "Mipmapping"
-
-       Change the third paragraph (page 174) to say:
-       
-       "For a two-dimensional texture, two-dimensional array texture, or
-       cube map texture,"
-
-       Change the fourth paragraph (page 174) to say:
-
-       "And for a one-dimensional texture or a one-dimensional array texture,"
-
-       After the first paragraph (page 175) add:
-
-       "For one-dimensional array textures, h_b and d_b are treated as 1,
-       regardless of the actual values, when performing mipmap calculations.
-       For two-dimensional array textures, d_b is always treated as one,
-       regardless of the actual value, when performing mipmap calculations."
-
-    -- Section 3.8.8 "Automatic Mipmap Generation" in the section "Mipmapping"
-
-       Change the third paragraph (page 176) to say (spec changes identical
-       to EXT_texture_array):
-
-       "The contents of the derived arrays are computed by repeated, filtered
-       reduction of the level_base array.  For one- and two-dimensional array
-       textures, each layer is filtered independently.  ..."
-
-    -- Section 3.8.8 "Manual Mipmap Generation" in the section "Mipmapping"
-
-       Change first paragraph to say (spec changes identical to
-       EXT_texture_array):
-
-       "Mipmaps can be generated manually with the command
-
-         void GenerateMipmapEXT(enum target);
-
-       where <target> is one of TEXTURE_1D, TEXTURE_2D, TEXTURE_CUBE_MAP,
-       TEXTURE_3D, TEXTURE_1D_ARRAY, or TEXTURE_2D_ARRAY.  Mipmap generation
-       affects the texture image attached to <target>.  ..."
-
-    -- Section 3.8.10 "Texture Completeness"
-
-       Change the second paragaph (page 177) to say (spec changes identical
-       to EXT_texture_array):
-
-       "For one-, two-, or three-dimensional textures and one- or
-       two-dimensional array textures, a texture is complete if the following
-       conditions all hold true:"
-
-    -- Section 3.8.11 "Texture State and Proxy State"
-
-       Change the second and third paragraphs (page 179) to say (spec changes
-       identical to EXT_texture_array):
-
-       "In addition to image arrays for one-, two-, and three-dimensional
-       textures, one- and two-dimensional array textures, and the six image
-       arrays for the cube map texture, partially instantiated image arrays
-       are maintained for one-, two-, and three-dimensional textures and one-
-       and two-dimensional array textures.  Additionally, a single proxy image
-       array is maintained for the cube map texture.  Each proxy image array
-       includes width, height, depth, border width, and internal format state
-       values, as well as state for the red, green, blue, alpha, luminance,
-       and intensity component resolutions. Proxy image arrays do not include
-       image data, nor do they include texture properties. When TexImage3D is
-       executed with target specified as PROXY_TEXTURE_3D, the
-       three-dimensional proxy state values of the specified level-of-detail
-       are recomputed and updated. If the image array would not be supported
-       by TexImage3D called with target set to TEXTURE 3D, no error is
-       generated, but the proxy width, height, depth, border width, and
-       component resolutions are set to zero. If the image array would be
-       supported by such a call to TexImage3D, the proxy state values are set
-       exactly as though the actual image array were being specified. No pixel
-       data are transferred or processed in either case.
-
-       Proxy arrays for one- and two-dimensional textures and one- and
-       two-dimensional array textures are operated on in the same way when
-       TexImage1D is executed with target specified as PROXY_TEXTURE_1D,
-       TexImage2D is executed with target specified as PROXY_TEXTURE_2D or
-       PROXY_TEXTURE_1D_ARRAY_EXT, or TexImage3D is executed with target
-       specified as PROXY_TETXURE_2D_ARRAY_EXT."
-
-    -- Section 3.8.12 "Texture Objects"
-
-       Change section (page 180) to say (spec changes identical to 
-       EXT_texture_array):
-
-       "In addition to the default textures TEXTURE_1D, TEXTURE_2D,
-       TEXTURE_3D, TEXTURE_CUBE_MAP, TEXTURE_1D_ARRAY_EXT, and TEXTURE_2D_EXT,
-       named one-, two-, and three-dimensional, cube map, and one- and
-       two-dimensional array texture objects can be created and operated upon.
-       The name space for texture objects is the unsigned integers, with zero
-       reserved by the GL.
-
-       A texture object is created by binding an unused name to TEXTURE_1D,
-       TEXTURE_2D, TEXTURE_3D, TEXTURE_CUBE_MAP, TEXTURE_1D_ARRAY_EXT, or
-       TEXTURE_2D_ARRAY_EXT. The binding is effected by calling
-
-         void BindTexture(enum target, uint texture);
-
-       with <target> set to the desired texture target and <texture> set to
-       the unused name.  The resulting texture object is a new state vector,
-       comprising all the state values listed in section 3.8.11, set to the
-       same initial values. If the new texture object is bound to TEXTURE_1D,
-       TEXTURE_2D, TEXTURE_3D, TEXTURE_CUBE_MAP, TEXTURE_1D_ARRAY_EXT, or
-       TEXTURE_2D_ARRAY_EXT, it is and remains a one-, two-,
-       three-dimensional, cube map, one- or two-dimensional array texture
-       respectively until it is deleted.
-
-       BindTexture may also be used to bind an existing texture object to
-       either TEXTURE_1D, TEXTURE_2D, TEXTURE_3D, TEXTURE_CUBE_MAP,
-       TEXTURE_1D_ARRAY_EXT, or TEXTURE_2D_ARRAY_EXT. The error
-       INVALID_OPERATION is generated if an attempt is made to bind a texture
-       object of different dimensionality than the specified target. If the
-       bind is successful no change is made to the state of the bound texture
-       object, and any previous binding to target is broken.
-
-       While a texture object is bound, GL operations on the target to which
-       it is bound affect the bound object, and queries of the target to which
-       it is bound return state from the bound object. If texture mapping of
-       the dimensionality of the target to which a texture object is bound is
-       enabled, the state of the bound texture object directs the texturing
-       operation.
-
-       In the initial state, TEXTURE_1D, TEXTURE_2D, TEXTURE_3D,
-       TEXTURE_CUBE_MAP, TEXTURE_1D_ARRAY_EXT, and TEXTURE_2D_ARRAY_EXT have
-       one-, two-, three-dimensional, cube map, and one- and two-dimensional
-       array texture state vectors respectively associated with them. In order
-       that access to these initial textures not be lost, they are treated as
-       texture objects all of whose names are 0. The initial one-, two-,
-       three-dimensional, cube map, one- and two-dimensional array textures
-       are therefore operated upon, queried, and applied as TEXTURE_1D,
-       TEXTURE_2D, TEXTURE_3D, TEXTURE_CUBE_MAP, TEXTURE_1D_ARRAY_EXT, and
-       TEXTURE_2D_ARRAY_EXT respectively while 0 is bound to the corresponding
-       targets.
-
-       Change second paragraph on page 181 to say (spec changes identical to 
-       EXT_texture_array):
-       
-       "...  If a texture that is currently bound to one of the targets
-       TEXTURE_1D, TEXTURE_2D, TEXTURE_3D, TEXTURE_CUBE_MAP,
-       TEXTURE_1D_ARRAY_EXT, or TEXTURE_2D_ARRAY_EXT is deleted, it is as
-       though BindTexture had been executed with the same target and texture
-       zero. ..."
-
-       Change second paragraph on page 182 to say (spec changes identical to 
-       EXT_texture_array):
-       
-       "The texture object name space, including the initial one-, two-, and
-       three dimensional, cube map, and one- and two-dimensional array texture
-       objects, is shared among all texture units. ..."
-
-
-    -- Section 3.8.14 "Depth Texture Comparison Modes" in "Texture Comparison Modes"
-
-       Change second through fourth paragraphs (page 188) to say:
-
-       "Let D_t be the depth texture value, in the range [0, 1].  For
-       texture lookups from one- and two-dimesional, rectangle, and
-       one-dimensional array targets, let R be the interpolated <r>
-       texture coordinate, clamped to the range [0, 1].  For texture lookups
-       from two-dimesional array texture targets, let R be the interpolated
-       <q> texture coordinate, clamped to the range [0, 1].  Then the
-       effective texture value L_t, I_t, or A_t is computed as follows:
-
-       If the value of TEXTURE_COMPARE_MODE is NONE, then
-
-          r = Dt
-
-       If the value of TEXTURE_COMPARE_MODE is
-       COMPARE_REF_DEPTH_TO_TEXTURE_EXT), then r depends on the texture
-       comparison function as shown in table 3.27."
-
-    -- Section 3.8.15 "Texture Application"
-
-       Change the first paragraph (page 189) to say:
-
-       "Texturing is enabled or disabled using the generic Enable and Disable
-       commands, respectively, with the symbolic constants TEXTURE_1D,
-       TEXTURE_2D, TEXTURE_3D, TEXTURE_CUBE_MAP, TEXTURE_1D_ARRAY_EXT, or
-       TEXTURE_2D_ARRAY_EXT to enable one-, two-, three-dimensional, cube
-       map, one-dimensional array, or two-dimensional array texture,
-       respectively.  If both two- and one-dimensional textures are enabled,
-       the two-dimensional texture is used.  If the three-dimensional and
-       either of the two- or one-dimensional textures is enabled, the
-       three-dimensional texture is used.  If the cube map texture and any of
-       the three-, two-, or one-dimensional textures is enabled, then cube map
-       texturing is used.  If one-dimensional array texture is enabled and any
-       of cube map, three-, two-, or one-dimensional textures is enabled, 
-       one-dimensional array texturing is used.  If two-dimensional array
-       texture is enabled and any of cube map, three-, two-, one-dimensional
-       textures or one-dimensional array texture is enabled, two-dimensional
-       array texturing is used..."
-
-    -- Section 3.11.2 of ARB_fragment_program (Fragment Program Grammar and Restrictions):
-
-       (mostly add to existing grammar rules)
-
-       <optionName>           ::= "MESA_texture_array"
-
-       <texTarget>            ::= "1D"
-                               | "2D"
-                               | "3D"
-                               | "CUBE"
-                               | "RECT"
-                               | <arrayTarget> (if program option is present)
-                               | <shadowTarget> (if program option is present)
-
-       <arrayTarget>          ::= "ARRAY1D"
-                               | "ARRAY2D"
-
-       <shadowTarget>         ::= "SHADOW1D"
-                               | "SHADOW2D"
-                               | "SHADOWRECT"
-                               | <shadowArrayTarget> (if program option is present)
-
-       <shadowArrayTarget>    ::= "SHADOWARRAY1D"
-                               | "SHADOWARRAY2D"
-
-
-    -- Add Section 3.11.4.5.4 "Texture Stack Option"
-
-       "If a fragment program specifies the "MESA_texture_array" program
-       option, the <texTarget> rule is modified to add the texture targets
-       ARRAY1D and ARRAY2D (See Section 3.11.2)."
-
-    -- Section 3.11.6 "Fragment Program Texture Instruction Set"
-
-       (replace 1st and 2nd paragraphs with the following paragraphs)
-
-       "The first three texture instructions described below specify the
-       mapping of 4-tuple input vectors to 4-tuple output vectors.
-       The sampling of the texture works as described in section 3.8,
-       except that texture environments and texture functions are not
-       applicable, and the texture enables hierarchy is replaced by explicit
-       references to the desired texture target (i.e., 1D, 2D, 3D, cube map,
-       rectangle, ARRAY1D, ARRAY2D).  These texture instructions specify
-       how the 4-tuple is mapped into the coordinates used for sampling.  The
-       following function is used to describe the texture sampling in the
-       descriptions below: 
-
-         vec4 TextureSample(vec4 coord, float lodBias, int texImageUnit,
-                            enum texTarget);
-
-       Note that not all four components of the texture coordinates <coord>
-       are used by all texture targets.  Component usage for each <texTarget>
-       is defined in table X.
-
-                                                        coordinates used
-         texTarget          Texture Type               s t r  layer  shadow
-         ----------------   ---------------------      -----  -----  ------
-         1D                 TEXTURE_1D                 x - -    -      -
-         2D                 TEXTURE_2D                 x y -    -      -
-         3D                 TEXTURE_3D                 x y z    -      -
-         CUBE               TEXTURE_CUBE_MAP           x y z    -      -
-         RECT               TEXTURE_RECTANGLE_ARB      x y -    -      -
-         ARRAY1D            TEXTURE_1D_ARRAY_EXT       x - -    y      -
-         ARRAY2D            TEXTURE_2D_ARRAY_EXT       x y -    z      -
-         SHADOW1D           TEXTURE_1D                 x - -    -      z
-         SHADOW2D           TEXTURE_2D                 x y -    -      z
-         SHADOWRECT         TEXTURE_RECTANGLE_ARB      x y -    -      z
-         SHADOWARRAY1D      TEXTURE_1D_ARRAY_EXT       x - -    y      z
-         SHADOWARRAY2D      TEXTURE_2D_ARRAY_EXT       x y -    z      w
-
-         Table X:  Texture types accessed for each of the <texTarget>, and
-         coordinate mappings.  The "coordinates used" column indicate the
-         input values used for each coordinate of the texture lookup, the
-         layer selector for array textures, and the reference value for
-         texture comparisons."
-
-    -- Section 3.11.6.2 "TXP: Project coordinate and map to color"
-    
-       Add to the end of the section:
-       
-       "A program will fail to load if the TXP instruction is used in
-       conjunction with the SHADOWARRAY2D target."
-
-Additions to Chapter 4 of the OpenGL 2.0 Specification (Per-Fragment Operations)
-
-    -- Section 4.4.2.3 "Attaching Texture Images to a Framebuffer"
-
-       Add to the end of the section (spec changes identical to
-       EXT_texture_array):
-
-       "The command
-
-         void FramebufferTextureLayerEXT(enum target, enum attachment,
-                                         uint texture, int level, int layer);
-
-       operates identically to FramebufferTexture3DEXT, except that it
-       attaches a single layer of a three-dimensional texture or a one- or
-       two-dimensional array texture.  <layer> is an integer indicating the
-       layer number, and is treated identically to the <zoffset> parameter in
-       FramebufferTexture3DEXT.  The error INVALID_VALUE is generated if
-       <layer> is negative.  The error INVALID_OPERATION is generated if
-       <texture> is non-zero and is not the name of a three dimensional
-       texture or one- or two-dimensional array texture.  Unlike
-       FramebufferTexture3D, no <textarget> parameter is accepted.
-
-       If <texture> is non-zero and the command does not result in an error,
-       the framebuffer attachment state corresponding to <attachment> is
-       updated as in the other FramebufferTexture commands, except that
-       FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER_EXT is set to <layer>."
-
-    -- Section 4.4.4.1 "Framebuffer Attachment Completeness"
-
-      Add to the end of the list of completeness rules (spec changes
-      identical to EXT_texture_array):
-
-        "* If FRAMEBUFFER_ATTACHMENT_OBJECT_TYPE_EXT is TEXTURE and
-           FRAMEBUFFER_ATTACHMENT_OBJECT_NAME_EXT names a one- or 
-           two-dimensional array texture, then
-           FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER_EXT must be smaller than the
-           number of layers in the texture."
-
-Additions to Chapter 5 of the OpenGL 2.0 Specification (Special Functions)
-
-    -- Section 5.4 "Display Lists"
-
-       Change the first paragraphi on page 242 to say (spec changes
-       identical to EXT_texture_array):
-
-       "TexImage3D, TexImage2D, TexImage1D, Histogram, and ColorTable are
-       executed immediately when called with the corresponding proxy arguments
-       PROXY_TEXTURE_3D or PROXY_TEXTURE_2D_ARRAY_EXT; PROXY_TEXTURE_2D,
-       PROXY_TEXTURE_CUBE_MAP, or PROXY_TEXTURE_1D_ARRAY_EXT;
-       PROXY_TEXTURE_1D; PROXY_HISTOGRAM; and PROXY_COLOR_TABLE,
-       PROXY_POST_CONVOLUTION_COLOR_TABLE, or
-       PROXY_POST_COLOR_MATRIX_COLOR_TABLE."
-
-Additions to Chapter 6 of the OpenGL 2.0 Specification (State and State Requests)
-
-    -- Section 6.1.3 "Enumerated Queries"
-
-       Add after the line beginning "If the value of
-       FRAMEBUFFER_ATTACHMENT_OBJECT_TYPE_EXT is TEXTURE" (spec changes
-       identical to EXT_texture_array):
-
-       "If <pname> is FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER_EXT and the
-       texture object named FRAMEBUFFER_ATTACHMENT_OBJECT_NAME_EXT is a
-       three-dimensional texture or a one- or two-dimensional array texture,
-       then <params> will contain the number of texture layer attached to the
-       attachment point.  Otherwise, <params> will contain the value zero."
-
-    -- Section 6.1.4 "Texture Queries"
-    
-       Change the first three paragraphs (page 248) to say (spec changes
-       identical to EXT_texture_array):
-
-       "The command
-
-         void GetTexImage(enum tex, int lod, enum format,
-                          enum type, void *img);
-
-       is used to obtain texture images. It is somewhat different from the
-       other get commands; tex is a symbolic value indicating which texture
-       (or texture face in the case of a cube map texture target name) is to
-       be obtained.  TEXTURE_1D, TEXTURE_2D, TEXTURE_3D, TEXTURE_1D_ARRAY_EXT,
-       and TEXTURE_2D_ARRAY_EXT indicate a one-, two-, or three-dimensional
-       texture, or one- or two-dimensional array texture, respectively.
-       TEXTURE_CUBE_MAP_POSITIVE_X, ...
-
-       GetTexImage obtains... from the first image to the last for
-       three-dimensional textures.  One- and two-dimensional array textures
-       are treated as two- and three-dimensional images, respectively, where
-       the layers are treated as rows or images.  These groups are then...
-
-       For three-dimensional and two-dimensional array textures, pixel storage
-       operations are applied as if the image were two-dimensional, except
-       that the additional pixel storage state values PACK_IMAGE_HEIGHT and
-       PACK_SKIP_IMAGES are applied. ..."
-
-Additions to Appendix A of the OpenGL 2.0 Specification (Invariance)
-
-    None
-
-Additions to the AGL/GLX/WGL Specifications
-
-    None
-
-GLX Protocol
-
-    None
-
-Dependencies on ARB_fragment_program
-
-    If ARB_fragment_program is not supported, the changes to section 3.11
-    should be ignored.
-
-Dependencies on EXT_framebuffer_object
-
-    If EXT_framebuffer_object is not supported, the changes to section
-    3.8.8 ("Manual Mipmap Generation"), 4.4.2.3, and 6.1.3 should be ignored.
-
-Dependencies on EXT_texture_compression_s3tc and NV_texture_compression_vtc
-
-    (Identical dependency as EXT_texture_array.)
-
-    S3TC texture compression is supported for two-dimensional array textures.
-    When <target> is TEXTURE_2D_ARRAY_EXT, each layer is stored independently
-    as a compressed two-dimensional textures.  When specifying or querying
-    compressed images using one of the S3TC formats, the images are provided
-    and/or returned as a series of two-dimensional textures stored
-    consecutively in memory, with the layer closest to zero specified first.
-    For array textures, images are not arranged in 4x4x4 or 4x4x2 blocks as in
-    the three-dimensional compression format provided in the
-    EXT_texture_compression_vtc extension.  Pixel store parameters, including
-    those specific to three-dimensional images, are ignored when compressed
-    image data are provided or returned, as in the
-    EXT_texture_compression_s3tc extension.
-
-    S3TC compression is not supported for one-dimensional texture targets in
-    EXT_texture_compression_s3tc, and is not supported for one-dimensional
-    array textures in this extension.  If compressed one-dimensional arrays
-    are needed, use a two-dimensional texture with a height of one.
-
-    This extension allows the use of the four S3TC internal format types in
-    TexImage3D, CompressedTexImage3D, and CompressedTexSubImage3D calls.
-
-Errors
-
-    None
-
-New State
-
-    (add to table 6.15, p. 276)
-
-                                                     Initial
-    Get Value                     Type   Get Command  Value Description           Sec.    Attribute
-    ----------------------------  -----  -----------  ----- --------------------  ------  ---------
-    TEXTURE_BINDING_1D_ARRAY_EXT  2*xZ+  GetIntegerv    0   texture object bound  3.8.12  texture
-                                                            to TEXTURE_1D_ARRAY
-    TEXTURE_BINDING_2D_ARRAY_EXT  2*xZ+  GetIntegerv    0   texture object bound  3.8.12  texture
-                                                            to TEXTURE_2D_ARRAY
-
-
-New Implementation Dependent State
-
-    (add to Table 6.32, p. 293)
-
-                                                    Minimum
-    Get Value                     Type  Get Command  Value  Description         Sec.  Attribute
-    ----------------------------  ----  ----------- ------- ------------------  ----- ---------
-    MAX_TEXTURE_ARRAY_LAYERS_EXT   Z+   GetIntegerv   64    maximum number of   3.8.1     -
-                                                            layers for texture
-                                                            arrays
-
-Issues
-
-    (1) Is "texture stack" a good name for this functionality?
-
-        NO.  The name is changed to "array texture" to match the
-        nomenclature used by GL_EXT_texture_array.
-
-    (2) Should the R texture coordinate be treated as normalized or
-    un-normalized?  If it were un-normalized, floor(R) could be thought
-    of as a direct index into the array texture.  This may be more
-    convenient for applications.
-
-        RESOLVED.  All texture coordinates are normalized.  The issue of
-        un-normalized texture coordinates has been discussed in the ARB
-        before and should be left for a layered extension.
-
-        RE-RESOLVED.  The R coordinate is un-normalized.  Accessing an array
-        using [0, layers-1] coordinates is much more natural.
-
-    (3) How does LOD selection work for stacked textures?
-
-        RESOLVED.  For 2D array textures the R coordinate is ignored, and
-        the LOD selection equations for 2D textures are used.  For 1D
-        array textures the T coordinate is ignored, and the LOD selection
-        equations for 1D textures are used.  The expected usage is in a
-        fragment program with an explicit LOD selection.
-
-    (4) What is the maximum size of a 2D array texture?  Is it the same
-    as for a 3D texture, or should a new query be added?  How about for 1D
-    array textures?
-
-        RESOLVED.  A new query is added.
-
-    (5) How are array textures exposed in GLSL?
-    
-        RESOLVED.  Use GL_EXT_texture_array.
-        
-    (6) Should a 1D array texture also be exposed?
-
-        RESOLVED.  For orthogonality, yes.
-
-    (7) How are stacked textures attached to framebuffer objects?
-
-        RESOLVED.  Layers of both one- and two-dimensional array textures
-        are attached using FreambufferTextureLayerEXT.  Once attached, the
-        array texture layer behaves exactly as either a one- or
-        two-dimensional texture.
-
-    (8) How is this extension related to GL_EXT_texture_array?
-    
-        This extension adapats GL_MESAX_texture_stack to the notation,
-        indexing, and FBO access of GL_EXT_texture_array.  This extension
-        replaces the GLSL support of GL_EXT_texture_array with
-        GL_ARB_fragment_program support.
-
-        Assembly program support is also provided by GL_NV_gpu_program4.
-        GL_NV_gpu_program4 also adds support for other features that are
-        specific to Nvidia hardware, while this extension adds only support
-        for array textures.
-
-        Much of text of this extension that has changed since
-        GL_MESAX_texture_stack comes directly from either
-        GL_EXT_texture_array or GL_NV_gpu_program4.
-
-Revision History
-
-    ||2005/11/15||0.1||idr||Initial draft MESAX version.||
-    ||2005/12/07||0.2||idr||Added framebuffer object interactions.||
-    ||2005/12/12||0.3||idr||Updated fragment program interactions.||
-    ||2007/05/16||0.4||idr||Converted to MESA_texture_array.  Brought in line with EXT_texture_array and NV_gpu_program4.||

docs/MiniGLX.html

@@ -88,6 +88,19 @@ driver (such as <code>radeon_dri.so</code>) at runtime. &nbsp;The
 environment variable <code>LIBGL_DRIVERS_PATH</code> should name the
 directory where these modules are located.<br>
 <br>
+Prior to running a MiniGXL application, the following kernel modules
+must be installed:<br>
+<br>
+<div style="margin-left: 40px;"> agpgart.o<br>
+radeonfb.o &nbsp;(assuming Radeon hardware)<br>
+radeon.o &nbsp;(assuming Radeon hardware)<br>
+</div>
+<code></code> <br>
+Finally, MiniGLX reads a configuration file (by default,<code>
+/etc/miniglx.conf</code>) to determine basic configuration information.
+&nbsp;The configuration file may also be located in the directory
+specified by the <code>MINIGLX_CONF</code> environment variable).<br>
+<br>
 The remainder of this section describes the MiniGLX API functions.<br>
 <br>
 <h2>3.1 Initialization</h2>

docs/README.MINGW32

@@ -88,66 +88,3 @@ Running the Build:
 
 		Paul G. <pgarceau@users.sourceforge.net>
 		Daniel Borca <dborca@users.sourceforge.net>
-
-
-
-******This section is added by Heromyth <zxpmyth@yahoo.com.cn>*************
-
-====================
-Updated on 2007-7-21
-====================
-
-Notice:
-	1) The generated DLLs are *not* compatible with the ones built
-with the other compilers like VC8, especially for GLUT. 
-
-	2) Although more tests are needed, it can be used individually!
-
-	3) You can set the options about whether using STDCALL to build MESA. The 
-config file is <Mesa3D-root>\configs\config.mgw. The default setting is that:
-		ALL_USING_STDCALL = 1
-, which means using STDCALL to build MESA. 
-
-	4) Of course, you can MESA without using STDCALL,I like this:) 
-The setting is :
-		ALL_USING_STDCALL = 0
-To do this, however, you must modify wingdi.h which is in MingW's include dir. 
-For example, run:
-	notepad	C:\MingW\include\wingdi.h
-, and delete all the lines where all the wgl*() functions are. Because they would 
-be conflicted with the ones in <Mesa3D-root>\include\GL\mesa_wgl.h.
-
->>>>>>>>>> Conflicted Functions List >>>>>>>>>>
-WINGDIAPI BOOL WINAPI wglCopyContext(HGLRC,HGLRC,UINT);
-WINGDIAPI HGLRC WINAPI wglCreateContext(HDC);
-WINGDIAPI HGLRC WINAPI wglCreateLayerContext(HDC,int);
-WINGDIAPI BOOL WINAPI wglDeleteContext(HGLRC);
-WINGDIAPI BOOL WINAPI wglDescribeLayerPlane(HDC,int,int,UINT,LPLAYERPLANEDESCRIPTOR);
-WINGDIAPI HGLRC WINAPI wglGetCurrentContext(void);
-WINGDIAPI HDC WINAPI wglGetCurrentDC(void);
-WINGDIAPI int WINAPI wglGetLayerPaletteEntries(HDC,int,int,int,COLORREF*);
-WINGDIAPI PROC WINAPI wglGetProcAddress(LPCSTR);
-WINGDIAPI BOOL WINAPI wglMakeCurrent(HDC,HGLRC);
-WINGDIAPI BOOL WINAPI wglRealizeLayerPalette(HDC,int,BOOL);
-WINGDIAPI int WINAPI wglSetLayerPaletteEntries(HDC,int,int,int,const COLORREF*);
-WINGDIAPI BOOL WINAPI wglShareLists(HGLRC,HGLRC);
-WINGDIAPI BOOL WINAPI wglSwapLayerBuffers(HDC,UINT);
-WINGDIAPI BOOL WINAPI wglUseFontBitmapsA(HDC,DWORD,DWORD,DWORD);
-WINGDIAPI BOOL WINAPI wglUseFontBitmapsW(HDC,DWORD,DWORD,DWORD);
-WINGDIAPI BOOL WINAPI wglUseFontOutlinesA(HDC,DWORD,DWORD,DWORD,FLOAT,FLOAT,int,LPGLYPHMETRICSFLOAT);
-WINGDIAPI BOOL WINAPI wglUseFontOutlinesW(HDC,DWORD,DWORD,DWORD,FLOAT,FLOAT,int,LPGLYPHMETRICSFLOAT);
-<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
-
-====================
-Updated on 2007-7-22
-====================
-	I havn't thought that I would find a better way to solve my problems so soon. 
-I changed the method in which the import-libs and DLLs are made. After this update,
-the DLLs of MESA are more optimized and more compatible. 
-	It seems that there is no need to keep the building way of 'NO-STDCALL'.The 
-way of USING_STDCALL is so nice! The file <Mesa3D-root>\configs\config.mgw is 
-also not needed, and can be deleted safely!
-	
-
-
-*********************************************************************************

docs/README.WIN32

@@ -1,6 +1,6 @@
 File: docs/README.WIN32
 
-Last updated: Apr 25, 2007 - Karl Schultz - kschultz@users.sourceforge.net
+Last updated: Mar 31, 2006 - Karl Schultz - kschultz@users.sourceforge.net
 
 Quick Start
 ----- -----
@@ -13,25 +13,18 @@ directory.  Don't worry, you will not overwrite anything.
 
 The Windows build system uses Microsoft Visual Studio.  Project files
 for a specific version of Visual Studio are in their own directory in
-the top-level "windows" directory.  For example, Visual Studio 8 files
-are in windows/VC8.
+the top-level "windows" directory.  For example, Visual Studio 6 files
+are in windows/VC6.  If a directory does not exist for your version of
+Visual Studio, you can try importing the project files from an earlier
+version of Visual Studio.  At this time, project files exist for
+Version 6 and Version 7.  The code has been built with a beta version
+of Version 8 and it runs on 64-bit Windows.  If you want to try this,
+start by importing the VC7 files and create the 64-bit targets in the
+configuration manager.
 
-Support has been dropped for versions of Visual Studio prior to 8. The
-main reason is because Microsoft now provides a free compiler and
-developer environment.  Visual Studio Express can be found at
-
-http://msdn.microsoft.com/vstudio/express/visualc/default.aspx
-
-You'll also need the Platform SDK.  Instructions for obtaining and
-using the SDK with Visual Studio Express can be found at
-
-http://msdn.microsoft.com/vstudio/express/visualc/usingpsdk/
-
-If you are stuck using VC6 or VC7, you may start with these project
-files, but you may need to modify them to reflect changes in the
-Mesa source code tree.  If you sucessfully update the project files,
-please submit them to the author of this document so that they may
-be included in the next distribution. 
+It is likely that the new and free Visual Studio Express can be used
+to build Mesa, but it hasn't been tried yet.  Start with the VC7
+project files.
 
 The project files to build the core Mesa library, Windows Mesa
 drivers, OSMesa, and GLU are in the mesa directory.  The project files
@@ -59,7 +52,9 @@ be useful in figuring out any problems, or report them to me.
 To build Mesa with the GDI driver, build the mesa, gdi, and glu
 projects in the Visual Studio workspace found at
 
-	windows/VC8/mesa/mesa.sln
+	windows/VC6/mesa/mesa.dsw
+or
+	windows/VC7/mesa/mesa.sln
 
 The osmesa DLL can also be built with the osmesa project.
 
@@ -79,7 +74,9 @@ GLUT and Demos
 
 A Visual Studio workspace can be found at 
 
-	windows/VC8/progs/progs.sln
+	windows/VC6/progs/progs.dsw
+or
+	windows/VC7/progs/progs.sln
 
 It can be used to build GLUT and a few demos.  The GLUT lib and DLL
 are copied to the top-level lib directory, along with the Mesa libs.
@@ -106,7 +103,7 @@ should build all the demos.
 Build System Notes
 ----- ------ -----
 
-VC6 (not actively supported)
+VC6
 ---
 
 Visual Studio 6 does not recognize files with the .cc extension as C++
@@ -118,16 +115,11 @@ Two additional configurations are provided, Debug x86 and Release x86
 that activate the shader code compilation by defining SLANG_86.  It is
 unknown if and how this works.
 
-VC7 (not actively supported)
+VC7
 ---
 
 The above-mentioned .cc problem does not exist in this version.
 
-VC8
----
-
-No notes.
-
 
 General
 -------

docs/README.directfb

@@ -6,7 +6,7 @@ Requirements
 ============
 
   To build Mesa with DirectFB (DirectFBGL) support you need:
-     - DirectFB at least 1.0.0 (http://directfb.org)
+     - DirectFB at least 0.9.21 (http://directfb.org)
      - pkg-config at least 0.9 (http://pkgconfig.sf.net)
 
 

docs/RELNOTES-6.4.1

@@ -0,0 +1,47 @@
+
+		        Mesa 6.4.1 Release Notes
+
+
+Introduction
+------------
+
+Mesa uses an even/odd version number scheme like the Linux kernel.
+Odd numbered versions (such as 6.3) designate new developmental releases.
+Even numbered versions (such as 6.4) designate stable releases.
+
+
+6.4.1 is a bug-fix release.  See the VERSIONS file for details.
+
+
+
+GLUT tarball
+------------
+
+Starting with 6.4, the GLUT library sources are distributed in a separate
+tarball.  This was done at the request of Linux distro vendors who prefer
+to use freeglut.
+
+
+
+
+Driver			Status
+----------------------	----------------------
+DRI drivers		varies with the driver
+XMesa (Xlib)		implements OpenGL 1.5
+OSMesa (off-screen)	implements OpenGL 1.5
+Windows/Win32		implements OpenGL 1.5
+Glide (3dfx Voodoo1/2)  requires updates	
+SVGA			requires updates
+DJGPP			requires updates
+GGI			requires updates
+BeOS			requires updates
+Allegro			requires updates
+D3D			requires updates
+
+The drivers which require updates mostly need to be updated to work
+with the new gl_renderbuffer / gl_framebuffer infrastructure introduced
+in Mesa 6.3.
+
+
+----------------------------------------------------------------------
+$Id: RELNOTES-6.4.1,v 3.1 2006/02/03 17:21:54 brianp Exp $

docs/RELNOTES-6.4.2

@@ -0,0 +1,47 @@
+
+		        Mesa 6.4.2 Release Notes
+
+
+Introduction
+------------
+
+Mesa uses an even/odd version number scheme like the Linux kernel.
+Odd numbered versions (such as 6.3) designate new developmental releases.
+Even numbered versions (such as 6.4) designate stable releases.
+
+
+6.4.2 is a minor bug-fix release.  See the VERSIONS file for details.
+
+
+
+GLUT tarball
+------------
+
+Starting with 6.4, the GLUT library sources are distributed in a separate
+tarball.  This was done at the request of Linux distro vendors who prefer
+to use freeglut.
+
+
+
+
+Driver			Status
+----------------------	----------------------
+DRI drivers		varies with the driver
+XMesa (Xlib)		implements OpenGL 1.5
+OSMesa (off-screen)	implements OpenGL 1.5
+Windows/Win32		implements OpenGL 1.5
+Glide (3dfx Voodoo1/2)  requires updates	
+SVGA			requires updates
+DJGPP			requires updates
+GGI			requires updates
+BeOS			requires updates
+Allegro			requires updates
+D3D			requires updates
+
+The drivers which require updates mostly need to be updated to work
+with the new gl_renderbuffer / gl_framebuffer infrastructure introduced
+in Mesa 6.3.
+
+
+----------------------------------------------------------------------
+$Id: RELNOTES-6.4.2,v 3.1 2006/02/03 17:21:54 brianp Exp $

docs/RELNOTES-6.5

@@ -0,0 +1,97 @@
+
+			Mesa 6.5 Release Notes
+
+
+
+Introduction
+------------
+
+Mesa uses an even/odd version number scheme like the Linux kernel.
+Odd numbered versions (such as 6.5) designate new developmental releases.
+Even numbered versions (such as 6.4) designate stable releases.
+
+
+
+New Features
+------------
+
+OpenGL Shading language support
+   This includes the GL_ARB_shader_objects, GL_ARB_shading_language_100,
+   GL_ARB_vertex_shader and GL_ARB_fragment_shader extensions.  Most of
+   the work was done by Michal Krol.
+   There's probably a fair number of bugs since this is a pretty large,
+   complicated body of code.
+
+   The OpenGL 2.0 interface to these features will be implemented in a
+   future version of Mesa,
+
+GL_EXT_timer_query
+   Used to measure the time of OpenGL operations at high precision.
+   Only supported in the software/Xlib driver at this time.
+
+GL_EXT_packed_depth_stencil
+   Defines a new GL_DEPTH_STENCIL_EXT pixel format.
+
+GL_EXT_framebuffer_blit
+   A simplified glCopyPixels-like feature for copying pixel rectangles.
+
+GL_ARB_half_float_pixel
+   Adds a new half-precision floating point format for image transfers,
+   such as for glDrawPixels, glReadPixels, glTexImage, etc.
+
+
+
+Removed Extensions
+------------------
+
+The following extensions have been removed:
+
+  GL_HP_occlusion_test - this is superceded by GL_ARB_occlusion_query.
+
+
+
+Known Issues
+------------
+
+Rendering to depth textures will not work.  Rendering to GL_DEPTH_STENCIL
+textures should work.
+
+
+
+Driver Interface Changes
+------------------------
+
+Stencil: The Driver.StencilOp/Func/Mask() functions have been replaced by
+the two-sided versions: Driver.Stencil*Separate().
+
+Render-to-texture: The functions for rendering to textures have changed.
+
+
+
+To Do (someday) items
+---------------------
+ Switch to freeglut
+ Increase MAX_DRAWBUFFERS
+ Fix linux-glide target/driver.
+ Fix lambda calculation for frag progs.
+
+
+
+Driver			Status
+----------------------	----------------------
+DRI drivers		varies with the driver
+XMesa/GLX (on Xlib)	implements OpenGL 1.5
+OSMesa (off-screen)	implements OpenGL 1.5
+Glide (3dfx Voodoo1/2)	implements OpenGL 1.3
+SVGA			implements OpenGL 1.3
+Wind River UGL		implements OpenGL 1.3
+Windows/Win32		implements OpenGL 1.5
+DJGPP			implements OpenGL 1.5
+GGI			implements OpenGL 1.3
+BeOS			implements OpenGL 1.5
+Allegro			needs updating
+D3D			needs updating
+
+
+----------------------------------------------------------------------
+$Id: RELNOTES-6.5,v 3.4 2006/03/29 04:53:02 brianp Exp $

docs/VERSIONS

@@ -1471,21 +1471,14 @@ Mesa Version History
 	- paletted texturing was broken w/ floating point palettes (K. Schultz)
 	- lots of assorted framebuffer object bug fixes
 
-6.5.1  August 31, 2006
+6.5.1  month, day, 2006
     New:
-	- Intel i965 DRI driver
 	- GL_APPLE_vertex_array_object extension (Ian Romanick)
-	- GL_EXT_texture_sRGB extension
-	- GL_EXT_gpu_program_parameters (Ian Romanick)
 	- "engine" demo
-	- updated fbdev driver and GLUT for fbdev (Sean D'Epagnier)
-	- many updates to the DRI drivers
     Changes:
 	- The glVertexAttribARB functions no longer alias the conventional
 	  vertex attributes.
 	- glxinfo program prints more info with -l option
-	- GL_FRAGMENT_PROGRAM_NV and GL_FRAGMENT_PROGRAM_ARB are now
-	  compatible, in terms of glBindProgramARB()
     Bug fixes:
 	- fixed broken texture border handling for depth textures (bug 6498)
 	- removed the test for duplicated framebuffer attachments, per
@@ -1505,10 +1498,3 @@ Mesa Version History
 	- 'normalized' parameter to glVertexAttribPointerARB didn't work
 	- disable bogus GLX_SGI_video_sync extension in xlib driver
 	- fixed R128 driver locking bug (Martijn van Oosterhout)
-	- using evaluators with vertex programs caused crashes (bug 7564)
-	- fragment.position wasn't set correctly for point/line primitives
-	- fixed parser bug for scalar sources for GL_NV_fragment_program
-	- max fragment program length was incorrectly 128, now 1024
-	- writes to result.depth in fragment programs weren't clamped to [0,1]
-	- fixed potential dangling pointer bug in glBindProgram()
-	- fixed some memory leaks (and potential crashes) in Xlib driver

docs/autoconf.html

@@ -1,289 +0,0 @@
-<html>
-
-<title>Compilation and Installation using Autoconf</title>
-
-<link rel="stylesheet" type="text/css" href="mesa.css"></head>
-
-<body>
-
-
-<h1>Compilation and Installation using Autoconf</h1>
-
-<ol>
-<li><a href="#basic">Basic Usage</a></li>
-<li><a href="#driver">Driver Options</a></li>
-  <ul>
-  <li><a href="#xlib">Xlib Driver Options</a></li>
-  <li><a href="#dri">DRI Driver Options</a></li>
-  <li><a href="#osmesa">OSMesa Driver Options</a></li>
-  </ul>
-<li><a href="#library">Library Options</a></li>
-  <ul>
-  <li><a href="#glu">GLU</a></li>
-  <li><a href="#glw">GLw</a></li>
-  <li><a href="#glut">GLUT</a></li>
-  </ul>
-<li><a href="#demos">Demo Program Options</a></li>
-</ol>
-
-
-<a name="basic">
-<h2>1. Basic Usage</h2>
-
-<p>
-The autoconf generated configure script can be used to guess your
-platform and change various options for building Mesa. To use the
-configure script, type:
-</p>
-
-<pre>
-    ./configure
-</pre>
-
-<p>
-To see a short description of all the options, type <code>./configure
---help</code>. If you are using a development snapshot and the configure
-script does not exist, type <code>./autogen.sh</code> to generate it
-first. If you know the options you want to pass to
-<code>configure</code>, you can pass them to <code>autogen.sh</code>. It
-will run <code>configure</code> with these options after it is
-generated. Once you have run <code>configure</code> and set the options
-to your preference, type:
-</p>
-
-<pre>
-    make
-</pre>
-
-<p>
-This will produce libGL.so and several other libraries depending on the
-options you have chosen. Later, if you want to rebuild for a different
-configuration run <code>make realclean</code> before rebuilding.
-</p>
-
-<p>
-Some of the generic autoconf options are used with Mesa:
-
-<ul>
-<li><code>--prefix=PREFIX</code> - This is the root directory where
-files will be installed by <code>make install</code>. The default is
-<code>/usr/local</code>.
-</li>
-<li><code>--exec-prefix=EPREFIX</code> - This is the root directory
-where architecture-dependent files will be installed. In Mesa, this is
-only used to derive the directory for the libraries. The default is
-<code>${prefix}</code>.
-</li>
-<li><code>--libdir=LIBDIR</code> - This option specifies the directory
-where the GL libraries will be installed. The default is
-<code>${exec_prefix}/lib</code>. It also serves as the name of the
-library staging area in the source tree. For instance, if the option
-<code>--libdir=/usr/local/lib64</code> is used, the libraries will be
-created in a <code>lib64</code> directory at the top of the Mesa source
-tree.
-</li>
-<li><code>--enable-static, --disable-shared</code> - By default, Mesa
-will build shared libraries. Either of these options will force static
-libraries to be built. It is not currently possible to build static and
-shared libraries in a single pass.
-</li>
-<li><code>CC, CFLAGS, CXX, CXXFLAGS</code> - These environment variables
-control the C and C++ compilers used during the build. By default,
-<code>gcc</code> and <code>g++</code> are used with the options
-<code>"-g -O2"</code>.
-</li>
-<li><code>LDFLAGS</code> - An environment variable specifying flags to
-pass when linking programs. These are normally empty, but can be used
-to direct the linker to use libraries in nonstandard directories. For
-example, <code>LDFLAGS="-L/usr/X11R6/lib"</code>.
-</li>
-<li><code>PKG_CONFIG_PATH</code> - When available, the
-<code>pkg-config</code> utility is used to search for external libraries
-on the system. This environment variable is used to control the search
-path for <code>pkg-config</code>. For instance, setting
-<code>PKG_CONFIG_PATH=/usr/X11R6/lib/pkgconfig</code> will search for
-package metadata in <code>/usr/X11R6</code> before the standard
-directories.
-</li>
-</ul>
-</p>
-
-<p>
-There are also a few general options for altering the Mesa build:
-<ul>
-<li><code>--with-x</code> - When the X11 development libraries are
-needed, the <code>pkg-config</code> utility <a href="#pkg-config">will
-be used</a> for locating them. If they cannot be found through
-<code>pkg-config</code> a fallback routing using <code>imake</code> will
-be used. In this case, the <code>--with-x</code>,
-<code>--x-includes</code> and <code>--x-libraries</code> options can
-control the use of X for Mesa.
-</li>
-<li><code>--enable-gl-osmesa</code> - The <a href="osmesa.html">OSMesa
-library</a> can be built on top of libGL for drivers that provide it.
-This option controls whether to build libOSMesa. By default, this is
-enabled for the Xlib driver and disabled otherwise. Note that this
-option is different than using OSMesa as the driver.
-</li>
-<li><code>--enable-debug</code> - This option will enable compiler
-options and macros to aid in debugging the Mesa libraries.
-</li>
-<li><code>--disable-asm</code> - There are assembly routines
-available for a few architectures. These will be used by default if
-one of these architectures is detected. This option ensures that
-assembly will not be used.
-</li>
-<li><code>--enable-32-bit, --enable-64-bit</code> - By default, the
-build will compile code as directed by the environment variables
-<code>CC</code>, <code>CFLAGS</code>, etc. If the compiler is
-<code>gcc</code>, these options offer a helper to add the compiler flags
-to force 32- or 64-bit code generation as used on the x86 and x86_64
-architectures.
-</li>
-</ul>
-</p>
-
-
-<a name="driver">
-<h2>2. Driver Options</h2>
-
-<p>
-There are several different driver modes that Mesa can use. These are
-described in more detail in the <a href="install.html">basic
-installation instructions</a>. The Mesa driver is controlled through the
-configure option --with-driver. There are currently three supported
-options in the configure script.
-</p>
-
-<ul>
-
-<a name="xlib">
-<li><b><em>Xlib</em></b> - This is the default mode for building Mesa.
-It uses Xlib as a software renderer to do all rendering. It corresponds
-to the option <code>--with-driver=xlib</code>. The libX11 and libXext
-libraries, as well as the X11 development headers, will be need to
-support the Xlib driver.
-</li>
-
-<a name="dri">
-<li><b><em>DRI</em></b> - This mode uses the DRI hardware drivers for
-accelerated OpenGL rendering. Enable the DRI drivers with the option
-<code>--with-driver=dri</code>. See the <a href="install.html">basic
-installation instructions</a> for details on prerequisites for the DRI
-drivers.
-</li>
-
-<!-- DRI specific options -->
-<p>
-<ul>
-<li><code>--with-dri-driverdir=DIR</code> - This option specifies the
-location the DRI drivers will be installed to and the location libGL
-will search for DRI drivers. The default is <code>${libdir}/dri</code>.
-</li>
-<li><code>--with-dri-drivers=DRIVER,DRIVER,...</code> - This option
-allows a specific set of DRI drivers to be built. For example,
-<code>--with-dri-drivers="swrast,i965,radeon,nouveau"</code>. By
-default, the drivers will be chosen depending on the target platform.
-See the directory <code>src/mesa/drivers/dri</code> in the source tree
-for available drivers. Beware that the swrast DRI driver is used by both
-libGL and the X.Org xserver GLX module to do software rendering, so you
-may run into problems if it is not available.</li>
-<!-- This explanation might be totally bogus. Kristian? -->
-<li><code>--disable-driglx-direct</code> - Disable direct rendering in
-GLX. Normally, direct hardware rendering through the DRI drivers and
-indirect software rendering are enabled in GLX. This option disables
-direct rendering entirely. It can be useful on architectures where
-kernel DRM modules are not available.
-</li>
-<li><code>--enable-glx-tls</code> - Enable Thread Local Storage (TLS) in
-GLX.
-</li>
-<li><code>--with-expat=DIR</code> - The DRI-enabled libGL uses expat to
-parse the DRI configuration files in <code>/etc/drirc</code> and
-<code>~/.drirc</code>. This option allows a specific expat installation
-to be used. For example, <code>--with-expat=/usr/local</code> will
-search for expat headers and libraries in <code>/usr/local/include</code>
-and <code>/usr/local/lib</code>, respectively.
-</li>
-</ul>
-</p>
-
-<a name="osmesa">
-<li><b><em>OSMesa</em></b> - No libGL is built in this
-mode. Instead, the driver code is built into the Off-Screen Mesa
-(OSMesa) library. See the <a href="osmesa.html">Off-Screen Rendering</a>
-page for more details.
-</li>
-
-<!-- OSMesa specific options -->
-<p>
-<ul>
-<li><code>--with-osmesa-bits=BITS</code> - This option allows the size
-of the color channel in bits to be specified. By default, an 8-bit
-channel will be used, and the driver will be named libOSMesa. Other
-options are 16- and 32-bit color channels, which will add the bit size
-to the library name. For example, <code>--with-osmesa-bits=16</code>
-will create the libOSMesa16 library with a 16-bit color channel.
-</li>
-</ul>
-</p>
-
-</ul>
-
-
-<a name="library">
-<h2>3. Library Options</h2>
-
-<p>
-The configure script provides more fine grained control over the GL
-libraries that will be built. More details on the specific GL libraries
-can be found in the <a href="install.html">basic installation
-instructions</a>.
-
-<ul>
-<a name="glu">
-<li><b><em>GLU</em></b> - The libGLU library will be built by default
-on all drivers. This can be disable with the option
-<code>--disable-glu</code>.
-</li>
-
-<a name="glw">
-<li><b><em>GLw</em></b> - The libGLw library will be built by default
-if libGLU has been enabled. This can be disable with the option
-<code>--disable-glw</code>.
-</li>
-
-<a name="glut">
-<li><b><em>GLUT</em></b> - The libglut library will be built by default
-if libGLU has been enabled and the glut source code from the MesaGLUT
-tarball is available. This can be disable with the option
-<code>--disable-glut</code>.
-</li>
-</ul>
-</p>
-
-
-<a name="demos">
-<h2>4. Demo Program Options</h2>
-
-<p>
-There are many demonstration programs in the MesaDemos tarball. If the
-programs are available when <code>./configure</code> is run, a subset of
-the programs will be built depending on the driver and library options
-chosen. See the directory <code>progs</code> for the full set of demos.
-
-<ul>
-<li><code>--with-demos=DEMOS,DEMOS,...</code> - This option allows a
-specific set of demo programs to be built. For example,
-<code>--with-demos="xdemos,slang"</code>. Beware that if this option is
-used, it will not be ensured that the necessary GL libraries will be
-available.
-</li>
-<li><code>--without-demos</code> - This completely disables building the
-demo programs. It is equivalent to <code>--with-demos=no</code>.
-</li>
-</ul>
-</p>
-
-</body>
-</html>

docs/bugs.html

@@ -9,9 +9,9 @@
 <H1>Bug Database</H1>
 
 <p>
-The Mesa bug database is hosted on
-<a href="http://freedesktop.org" target="_parent">freedesktop.org</a>.
-The old bug database on SourceForge is no longer used.
+The Mesa bug database is now hosted on
+<a href="http://freedesktop.org" target="_parent">freedesktop.org</a>
+instead of SourceForge.
 </p>
 
 <p>
@@ -26,20 +26,16 @@ Please follow these bug reporting guidelines:
 </p>
 
 <ul>
-<li>Check if a new version of Mesa is available which might have fixed
-the problem.
-<li>Check if your bug is already reported in the database.
-<li>Monitor your bug report for requests for additional information, etc.
-<li>If you're reporting a crash, try to use your debugger (gdb) to get a stack
-trace. Also, recompile Mesa in debug mode to get more detailed information.
-<li>Describe in detail how to reproduce the bug, especially with games
-and applications that the Mesa developers might not be familiar with.
+<li>Make sure you're using the most recent version of Mesa
+<li>Make sure your bug isn't already reported
+<li>Include as much information as possible in the report
 <li>Provide a simple GLUT-based test program if possible
+<li>Check back for follow-ups to the report
 </ul>
 
 <p>
-Bug reports will automatically be forwarded by bugzilla to the Mesa
-developer's mailing list.
+Bug reports will automatically be forwarded to the Mesa developer's mailing
+list.
 </p>
 
 <p>

docs/cell.html

@@ -1,137 +0,0 @@
-<HTML>
-
-<TITLE>Cell Driver</TITLE>
-
-<link rel="stylesheet" type="text/css" href="mesa.css"></head>
-
-<BODY>
-
-<H1>Mesa/Gallium Cell Driver</H1>
-
-<p>
-The Mesa
-<a href="http://en.wikipedia.org/wiki/Cell_%28microprocessor%29" target="_parent">Cell</a>
-driver is part of the 
-<a href="http://www.tungstengraphics.com/wiki/index.php/Gallium3D" target="_parent">Gallium3D</a>
-architecture.
-</p>
-
-<p>
-<a href="http://www.tungstengraphics.com/" target="_parent">Tungsten Graphics</a>
-is leading the project.
-Two phases are planned.
-First, to implement the framework for parallel rasterization using the Cell
-SPEs, including texture mapping.
-Second, to implement a full-featured OpenGL driver with support for GLSL, etc.
-The second phase is now underway.
-</p>
-
-
-<H2>Source Code</H2>
-
-<p>
-The latest Cell driver source code is on the <code>gallium-0.2</code> branch
-of the Mesa git repository.
-After you've cloned the repository, check out the branch with:
-</p>
-<pre>
-   git-checkout -b gallium-0.2 origin/gallium-0.2
-</pre>
-<p>
-To build the driver you'll need the IBM Cell SDK (version 2.1 or 3.0).
-To use the driver you'll need a Cell system, such as a PS3 running Linux,
-or the Cell Simulator (untested, though).
-</p>
-
-<p>
-If using Cell SDK 2.1, see the configs/linux-cell file for some
-special changes.
-</p>
-
-<p>
-To compile the code, run <code>make linux-cell</code>.
-To build in debug mode, run <code>make linux-cell-debug</code>.
-</p>
-
-<p>
-To use the library, make sure <code>LD_LIBRARY_PATH</code> points the Mesa/lib/
-directory that contains <code>libGL.so</code>.
-</p>
-
-<p>
-Verify that the Cell driver is being used by running <code>glxinfo</code>
-and looking for:
-<pre>
-  OpenGL renderer string: Gallium 0.2, Cell on Xlib
-</pre>
-
-
-<H2>Driver Implementation Summary</H2>
-
-<p>
-Rasterization is parallelized across the SPUs in a tiled-based manner.
-Batches of transformed triangles are sent to the SPUs (actually, pulled by from
-main memory by the SPUs).
-Each SPU loops over a set of 32x32-pixel screen tiles, rendering the triangles
-into each tile.
-Because of the limited SPU memory, framebuffer tiles are paged in/out of
-SPU local store as needed.
-Similarly, textures are tiled and brought into local store as needed.
-</p>
-
-
-<H2>Status</H2>
-
-<p>
-As of September 2008, the driver supports smooth/flat shaded triangle rendering
-with Z testing and simple texture mapping.
-Simple demos like gears run successfully.
-To test texture mapping, try progs/demos/texcyl (press right mouse button for
-rendering options).
-</p>
-<p>
-Runtime/dynamic code generation is being done for per-fragment
-operations (Z test, blend, etc) and for fragment programs (though only a
-few opcodes are implemented now).
-</p>
-<p>
-In general, however, the driver is rather slow because all vertex
-transformation is being done by an interpreter running on the PPU.
-Programs with many vertices or complex vertex shaders will run especially
-slow.
-This will be addressed in the future.
-</p>
-
-
-
-<H2>Debug Options</H2>
-
-<p>
-The CELL_DEBUG env var can be set to a comma-separated list of one or
-more of the following debug options:
-</p>
-<ul>
-<li><b>checker</b> - use a different background clear color for each SPU.
-   This lets you see which SPU is rendering which screen tiles.
-<li><b>sync</b> - wait/synchronize after each DMA transfer
-</ul>
-
-<p>
-If the GALLIUM_NOCELL env var is set, the softpipe driver will be used
-intead of the Cell driver.
-This is useful for comparison/validation.
-</p>
-
-
-
-<H2>Contributing</H2>
-
-<p>
-If you're interested in contributing to the effort, familiarize yourself
-with the code, join the <a href="lists.html">mesa3d-dev mailing list</a>,
-and describe what you'd like to do.
-</p>
-
-
-</BODY>
-</HTML>

docs/contents.html

@@ -25,10 +25,10 @@ a:visited {
 <ul>
 <li><a href="intro.html" target="MainFrame">Introduction</a>
 <li><a href="news.html" target="MainFrame">News</a>
-<LI><A HREF="developers.html" target="MainFrame">Developers</A>
 <li><a href="systems.html" target="MainFrame">Platforms and Drivers</a>
 <li><a href="license.html" target="MainFrame">License & Copyright</a>
 <li><a href="faq.html" target="MainFrame">FAQ</a>
+<li><a href="VERSIONS" target="MainFrame">Version History</a>
 <li><a href="relnotes.html" target="MainFrame">Release Notes</a>
 <li><a href="thanks.html" target="MainFrame">Acknowledgements</a>
 <li><a href="conform.html" target="MainFrame">Conformance Testing</a>
@@ -48,7 +48,6 @@ a:visited {
 <li><a href="lists.html" target="MainFrame">Mailing Lists</a>
 <li><a href="bugs.html" target="MainFrame">Bug Database</a>
 <li><a href="webmaster.html" target="MainFrame">Webmaster</a>
-<li><a href="http://dri.freedesktop.org/" target="MainFrame">Wiki</a>
 </ul>
 
 <b>User Topics</b>
@@ -65,18 +64,16 @@ a:visited {
 <b>Developer Topics</b>
 <ul>
 <li><a href="http://sourceforge.net/projects/mesa3d" target="_parent">SourceForge homepage</a>
-<li><a href="repository.html" target="MainFrame">Source Code Repository</a>
-<li><a href="memory.html" target="MainFrame">DRI Memory Management</a>
-<li><a href="shading.html" target="MainFrame">Shading Language</a>
+<li><a href="cvs_access.html" target="MainFrame">CVS Access</a>
+<li><a href="cvs_branches.html" target="MainFrame">CVS Branch Info</a>
 <li><a href="utilities.html" target="MainFrame">Utilities</a>
 <li><a href="helpwanted.html" target="MainFrame">Help Wanted</a>
 <li><a href="devinfo.html" target="MainFrame">Development Notes</a>
 <li><a href="sourcedocs.html" target="MainFrame">Source Documentation</a>
+<li><a href="subset.html" target="MainFrame">Subset Information</a>
 <li><a href="fbdev-dri.html" target="MainFrame">fbdev/DRI Environment</a>
-<li><a href="subset.html" target="MainFrame">Mesa Subset Driver</a>
 <li><a href="glfbdev-driver.html" target="MainFrame">glFBDev Driver</a>
-<LI><A HREF="dispatch.html" target="MainFrame">GL Dispatch</A>
-<li><a href="cell.html" target="MainFrame">Cell Driver</A>
+<LI><A HREF="custom.html" target="MainFrame">Custom Development</A>
 </ul>
 
 <b>Links</b>

docs/custom.html

@@ -0,0 +1,27 @@
+<HTML>
+
+<TITLE>Custom Development</TITLE>
+
+<link rel="stylesheet" type="text/css" href="mesa.css"></head>
+
+<BODY>
+
+<H1>Custom Development</H1>
+
+<p>
+Mesa is primarily developed and maintained on a volunteer basis.
+Some Mesa development work has been done in conjuction with contracted
+projects, such as the XFree86/DRI drivers.
+</p>
+
+<p>
+<pre>[Begin shameless plug]</pre>
+If you have a need for specific or custom Mesa development work,
+<a href="http://www.tungstengraphics.com/" target="_parent">
+Tungsten Graphics, Inc.</a> may be able to help you.
+<pre>[End shameless plug]</pre>
+</p>
+
+
+</body>
+</html>

docs/cvs_access.html

@@ -0,0 +1,106 @@
+<HTML>
+
+<TITLE>CVS Access</TITLE>
+
+<link rel="stylesheet" type="text/css" href="mesa.css"></head>
+
+<BODY>
+
+<h1>CVS Access</h1>
+
+<p>
+Mesa's CVS repository (code management system) is hosted on
+<a href="http://www.freedesktop.org" target="_parent">freedesktop.org</a>.
+</p>
+
+<p>
+You may access the repository either as an
+<a href="#anonymous">anonymous user</a> (read-only) or as a
+<a href="#developer">developer</a>
+(read/write).
+</p>
+
+<p>
+You may also 
+<a href="http://freedesktop.org/cgi-bin/viewcvs.cgi/mesa/Mesa/"
+target="_parent">browse the CVS repository</a>.
+</p>
+
+
+<a name="anonymous">
+<H2>Anonymous CVS Access</H2>
+
+<p>
+Anonymous, public, read-only access to the CVS repository is available.
+Here are the basic instructions for Unix systems:
+</p>
+
+<ol>
+<li>Install CVS client software on your computer if needed.
+    Version 1.9.28 is known to work.
+<li>Login as an anonymous user:
+    <pre>
+    cvs -d:pserver:anonymous@anoncvs.freedesktop.org:/cvs/mesa login
+    </pre>
+    Just press Enter/Return when prompted for a password.
+    <br>
+    <br>
+<li>Check out the code:
+    <pre>
+    cvs -d:pserver:anonymous@anoncvs.freedesktop.org:/cvs/mesa co Mesa
+    </pre>
+</ol>
+
+
+<p>To update your Mesa CVS source to the latest CVS source:</p>
+
+<ol>
+<li><code>cd Mesa</code>
+<li><code>cvs -z3 -d:pserver:anonymous@anoncvs.freedesktop.org:/cvs/mesa update</code>
+</ol>
+
+
+<a name="developer">
+<H2>Developer CVS Access</H2>
+
+<p>
+Mesa developers working with the Mesa CVS repository need to first
+have an account on <a href="http://www.freedesktop.org" target="_parent">
+freedesktop.org</a>.
+To get an account, please ask Brian or the other Mesa developers for
+permission.
+Then, if there are no objections, follow this
+<a href="http://www.freedesktop.org/wiki/AccountRequests" target="_parent">
+procedure</a>.
+</p>
+
+<p>
+Once your account is established, you can check out the Mesa CVS tree
+with:
+<pre>
+   setenv CVS_RSH ssh        (if using a csh-like shell)
+</pre>
+<em>OR</em>
+<pre>
+   export CVS_RSH=rsh        (if using a bash-like shell)
+</pre>
+followed by:
+<pre>
+   cvs -d:ext:yourusername@cvs.freedesktop.org:/cvs/mesa co Mesa
+</pre>
+
+<p>
+Of course, replace <em>yourusername</em> with your actual login name.
+</p>
+
+<p>
+Subsequent updates should only require:
+</p>
+<pre>
+   cvs update
+</pre>
+
+
+
+</body>
+</html>

docs/cvs_branches.html

@@ -0,0 +1,80 @@
+<HTML>
+
+<TITLE>CVS Branches</TITLE>
+
+<link rel="stylesheet" type="text/css" href="mesa.css"></head>
+
+<BODY>
+
+<H1>CVS Branch Information</H1>
+
+<p>
+At any given time, there may be several active branches in Mesa's
+CVS repository.
+
+Generally, the CVS trunk contains the latest development (unstable)
+code while a CVS branch has the latest stable code.
+</p>
+
+<p>
+Currently (Oct 2004), the trunk is the Mesa 6.3 development code
+while the mesa_6_2_branch branch has the stable Mesa 6.2.x code.
+</p>
+
+<p>
+Mesa releases use an even/odd numbering scheme to represent stable/development
+releases.
+
+For example, Mesa 6.2 (0 is considered even) is a stable release while
+Mesa 6.3 is a development release.
+</p>
+
+<p>
+To checkout a specific CVS branch pass <code>-r</code> and
+the branch tag after your CVS command.
+
+For example <code>cvs checkout -r mesa_6_2_branch Mesa</code> will
+checkout the 6.2 branch and <code>cvs update -r
+mesa_6_2_branch</code> will convert your current CVS tree to the 6.2
+branch.
+
+Consult <a href="http://www.durak.org/cvswebsites/doc/cvs_5.php3#SEC54"
+target="_parent">http://www.durak.org/cvswebsites/doc/cvs_5.php3#SEC54</a>
+for more on branching in CVS.
+</p>
+
+<p>
+To see a list of all the CVS branches run <code>cvs log README</code> (or any
+other file) and look for the section labeled <code>symbolic names</code>.
+You'll see something like this:
+</p>
+
+<pre>  symbolic names:
+        mesa_4_0: 1.3
+        mesa_4_0_branch: 1.3.0.6
+        mesa_3_5: 1.3
+        mesa_3_4_2: 1.3
+        mesa_3_4_1: 1.3
+        mesa_3_4: 1.3
+        mesa_3_4_branch: 1.3.0.4
+        mesa_3_3: 1.3
+        mesa_3_2_1: 1.1.1.1
+        mesa_3_3_texture_env_combine2: 1.3.0.2
+        mesa_3_2: 1.1.1.1
+        mesa_3_2_beta_1: 1.1.1.1
+        mesa_3_1: 1.1.1.1
+        mesa_3_2_dev: 1.1.1.1.0.2
+        mesa_3_1_beta_3: 1.1.1.1
+        start: 1.1.1.1
+        mesa: 1.1.1
+</pre>
+
+<p>
+Most will be obsolete branches.  Generally, the newer branches are at
+the top.  Ask on the mesa3d-dev mailing list to learn which branches
+are active.
+</p>
+
+
+</body>
+</html>