Use the BATCH_SZ macro where appropriate.

Bump driver date.
Merge vsync changes from trunk.
2006-09-29 13:15:43 +00:00 · 2006-09-29 11:00:50 +00:00 · 2006-09-28 15:56:00 +00:00 · 2006-09-28 14:33:04 +00:00 · 2006-09-28 09:34:33 +00:00 · 2006-09-28 09:18:45 +00:00
3779 changed files with 245703 additions and 631139 deletions
--- a/.emacs-dirvars
+++ b/.emacs-dirvars
@@ -1,10 +0,0 @@
-;; -*- emacs-lisp -*-
-;;
-;; This file is processed by the dirvars emacs package.  Each variable
-;; setting below is performed when this dirvars file is loaded.
-;;
-indent-tabs-mode: nil
-tab-width: 8
-c-basic-offset: 3
-kde-emacs-after-parent-string: ""
-evaluate: (c-set-offset 'inline-open '0)
--- a/.gitattributes
+++ b/.gitattributes
@@ -1,4 +0,0 @@
-*.dsp -crlf
-*.dsw -crlf
-*.sln -crlf
-*.vcproj -crlf
--- a/.gitignore
+++ b/.gitignore
@@ -1,26 +0,0 @@
-*.a
-*.dll
-*.exe
-*.ilk
-*.o
-*.obj
-*.pc
-*.pdb
-*.pyc
-*.pyo
-*.so
-*.sw[a-z]
-*~
-depend
-depend.bak
-lib
-lib64
-configure
-autom4te.cache
-aclocal.m4
-config.log
-config.status
-cscope*
-.scon*
-config.py
-build
--- a/231
+++ b/231
@@ -7,61 +7,48 @@ SUBDIRS = src progs

 default: $(TOP)/configs/current
 	@for dir in $(SUBDIRS) ; do \
-		if [ -d $$dir ] ; then \
-			(cd $$dir && $(MAKE)) || exit 1 ; \
-		fi \
+		(cd $$dir ; $(MAKE)) || exit 1 ; \
 	done

-all: default
-

 doxygen:
-	cd doxygen && $(MAKE)
+	(cd doxygen ; make) ; \

 clean:
-	-@touch $(TOP)/configs/current
-	-@for dir in $(SUBDIRS) ; do \
-		if [ -d $$dir ] ; then \
-			(cd $$dir && $(MAKE) clean) ; \
-		fi \
+	@for dir in $(SUBDIRS) ; do \
+		(cd $$dir ; $(MAKE) clean) ; \
 	done
-	-@test -s $(TOP)/configs/current || rm -f $(TOP)/configs/current


-realclean: clean
+realclean:
+	touch $(TOP)/configs/current
+	$(MAKE) clean
 	-rm -rf lib*
 	-rm -f $(TOP)/configs/current
-	-rm -f $(TOP)/configs/autoconf
-	-rm -rf autom4te.cache
-	-find . '(' -name '*.o' -o -name '*.a' -o -name '*.so' -o \
-	  -name depend -o -name depend.bak ')' -exec rm -f '{}' ';'
+	-rm -f `find . -name \*.o`
+	-rm -f `find . -name \*.a`
+	-rm -f `find . -name \*.so`
+	-rm -f `find . -name depend`


-distclean: realclean
-

 install:
 	@for dir in $(SUBDIRS) ; do \
-		if [ -d $$dir ] ; then \
-			(cd $$dir && $(MAKE) install) || exit 1 ; \
-		fi \
+		(cd $$dir ; $(MAKE) install) || exit 1 ; \
 	done

-
-.PHONY: default doxygen clean realclean distclean install linux-directfb-install
+# DirectFBGL module installation
+linux-directfb-install:
+	cd src/mesa/drivers/directfb && $(MAKE) install

 # If there's no current configuration file
 $(TOP)/configs/current:
 	@echo
 	@echo
 	@echo "Please choose a configuration from the following list:"
-	@ls -1 $(TOP)/configs | grep -v "current\|default\|CVS\|autoconf.*"
+	@ls -1 $(TOP)/configs | grep -v "current\|default\|CVS"
 	@echo
 	@echo "Then type 'make <config>' (ex: 'make linux-x86')"
-	@echo
-	@echo "Or, run './configure' then 'make'"
-	@echo "See './configure --help' for details"
-	@echo
 	@echo "(ignore the following error message)"
 	@exit 1

@@ -72,16 +59,11 @@ aix-64 \
 aix-64-static \
 aix-gcc \
 aix-static \
-autoconf \
-bluegene-osmesa \
-bluegene-xlc-osmesa \
 beos \
-catamount-osmesa-pgi \
 darwin \
-darwin-fat-32bit \
-darwin-fat-all \
 darwin-static \
 darwin-static-x86ppc \
+darwin-x86ppc \
 freebsd \
 freebsd-dri \
 freebsd-dri-amd64 \
@@ -107,17 +89,13 @@ irix6-o32-static \
 linux \
 linux-alpha \
 linux-alpha-static \
-linux-cell \
-linux-cell-debug \
 linux-debug \
 linux-directfb \
 linux-dri \
-linux-dri-debug \
 linux-dri-x86 \
 linux-dri-x86-64 \
 linux-dri-ppc \
 linux-dri-xcb \
-linux-egl \
 linux-indirect \
 linux-fbdev \
 linux-glide \
@@ -125,15 +103,12 @@ linux-ia64-icc \
 linux-ia64-icc-static \
 linux-icc \
 linux-icc-static \
-linux-llvm \
 linux-osmesa \
-linux-osmesa-static \
 linux-osmesa16 \
 linux-osmesa16-static \
 linux-osmesa32 \
 linux-ppc \
 linux-ppc-static \
-linux-profile \
 linux-solo \
 linux-solo-x86 \
 linux-solo-ia64 \
@@ -147,10 +122,8 @@ linux-x86-debug \
 linux-x86-32 \
 linux-x86-64 \
 linux-x86-64-debug \
-linux-x86-64-profile \
 linux-x86-64-static \
 linux-x86-glide \
-linux-x86-profile \
 linux-x86-static \
 netbsd \
 openbsd \
@@ -170,44 +143,36 @@ sunos5-v8 \
 sunos5-v8-static \
 sunos5-v9 \
 sunos5-v9-static \
-sunos5-v9-cc-g++ \
 ultrix-gcc:
-	@ if test -f configs/current || test -L configs/current ; then \
-		echo "Please run 'make realclean' before changing configs" ; \
-		exit 1 ; \
-	fi
 	(cd configs && rm -f current && ln -s $@ current)
 	$(MAKE) default


 # Rules for making release tarballs

-VERSION=7.5.1
-DIRECTORY = Mesa-$(VERSION)
-LIB_NAME = MesaLib-$(VERSION)
-DEMO_NAME = MesaDemos-$(VERSION)
-GLUT_NAME = MesaGLUT-$(VERSION)
+DIRECTORY = Mesa-6.5.1
+LIB_NAME = MesaLib-6.5.1
+DEMO_NAME = MesaDemos-6.5.1
+GLUT_NAME = MesaGLUT-6.5.1

 MAIN_FILES = \
 	$(DIRECTORY)/Makefile*						\
-	$(DIRECTORY)/configure						\
-	$(DIRECTORY)/configure.ac					\
-	$(DIRECTORY)/acinclude.m4					\
-	$(DIRECTORY)/aclocal.m4						\
-	$(DIRECTORY)/bin/config.guess					\
-	$(DIRECTORY)/bin/config.sub					\
-	$(DIRECTORY)/bin/install-sh					\
+	$(DIRECTORY)/descrip.mms					\
+	$(DIRECTORY)/mms-config.					\
 	$(DIRECTORY)/bin/mklib						\
-	$(DIRECTORY)/bin/minstall					\
-	$(DIRECTORY)/bin/version.mk					\
+	$(DIRECTORY)/bin/installmesa					\
 	$(DIRECTORY)/configs/[a-z]*					\
 	$(DIRECTORY)/docs/*.html					\
 	$(DIRECTORY)/docs/COPYING					\
 	$(DIRECTORY)/docs/README.*					\
 	$(DIRECTORY)/docs/RELNOTES*					\
+	$(DIRECTORY)/docs/VERSIONS					\
 	$(DIRECTORY)/docs/*.spec					\
 	$(DIRECTORY)/include/GL/internal/glcore.h			\
+	$(DIRECTORY)/include/GL/amesa.h					\
 	$(DIRECTORY)/include/GL/dmesa.h					\
+	$(DIRECTORY)/include/GL/directfbgl.h				\
+	$(DIRECTORY)/include/GL/fxmesa.h				\
 	$(DIRECTORY)/include/GL/ggimesa.h				\
 	$(DIRECTORY)/include/GL/gl.h					\
 	$(DIRECTORY)/include/GL/glext.h					\
@@ -222,42 +187,43 @@ MAIN_FILES = \
 	$(DIRECTORY)/include/GL/mglmesa.h				\
 	$(DIRECTORY)/include/GL/osmesa.h				\
 	$(DIRECTORY)/include/GL/svgamesa.h				\
+	$(DIRECTORY)/include/GL/ugl*.h					\
 	$(DIRECTORY)/include/GL/vms_x_fix.h				\
-	$(DIRECTORY)/include/GL/wglext.h				\
 	$(DIRECTORY)/include/GL/wmesa.h					\
+	$(DIRECTORY)/include/GL/xmesa.h					\
+	$(DIRECTORY)/include/GL/xmesa_x.h				\
+	$(DIRECTORY)/include/GL/xmesa_xf86.h				\
+	$(DIRECTORY)/include/GLView.h					\
 	$(DIRECTORY)/src/Makefile					\
+	$(DIRECTORY)/src/descrip.mms					\
 	$(DIRECTORY)/src/mesa/Makefile*					\
-	$(DIRECTORY)/src/mesa/sources.mak				\
+	$(DIRECTORY)/src/mesa/sources					\
 	$(DIRECTORY)/src/mesa/descrip.mms				\
-	$(DIRECTORY)/src/mesa/gl.pc.in					\
-	$(DIRECTORY)/src/mesa/osmesa.pc.in				\
 	$(DIRECTORY)/src/mesa/depend					\
 	$(DIRECTORY)/src/mesa/main/*.[chS]				\
 	$(DIRECTORY)/src/mesa/main/descrip.mms				\
 	$(DIRECTORY)/src/mesa/glapi/*.[chS]				\
+	$(DIRECTORY)/src/mesa/glapi/descrip.mms				\
+	$(DIRECTORY)/src/mesa/array_cache/*.[ch]			\
+	$(DIRECTORY)/src/mesa/array_cache/descrip.mms			\
 	$(DIRECTORY)/src/mesa/math/*.[ch]				\
 	$(DIRECTORY)/src/mesa/math/descrip.mms				\
 	$(DIRECTORY)/src/mesa/shader/*.[ch]				\
 	$(DIRECTORY)/src/mesa/shader/descrip.mms			\
 	$(DIRECTORY)/src/mesa/shader/grammar/*.[ch]			\
+	$(DIRECTORY)/src/mesa/shader/grammar/descrip.mms		\
 	$(DIRECTORY)/src/mesa/shader/slang/*.[ch]			\
 	$(DIRECTORY)/src/mesa/shader/slang/descrip.mms			\
 	$(DIRECTORY)/src/mesa/shader/slang/library/*.[ch]		\
-	$(DIRECTORY)/src/mesa/shader/slang/library/*.gc			\
-	$(DIRECTORY)/src/mesa/shader/slang/library/*.syn		\
-	$(DIRECTORY)/src/mesa/shader/slang/library/Makefile		\
 	$(DIRECTORY)/src/mesa/swrast/*.[ch]				\
 	$(DIRECTORY)/src/mesa/swrast/descrip.mms			\
 	$(DIRECTORY)/src/mesa/swrast_setup/*.[ch]			\
 	$(DIRECTORY)/src/mesa/swrast_setup/descrip.mms			\
-	$(DIRECTORY)/src/mesa/vbo/*.[chS]				\
-	$(DIRECTORY)/src/mesa/vbo/descrip.mms				\
 	$(DIRECTORY)/src/mesa/tnl/*.[chS]				\
 	$(DIRECTORY)/src/mesa/tnl/descrip.mms				\
 	$(DIRECTORY)/src/mesa/tnl_dd/*.[ch]				\
 	$(DIRECTORY)/src/mesa/tnl_dd/imm/*.[ch]				\
 	$(DIRECTORY)/src/mesa/tnl_dd/imm/NOTES.imm			\
-	$(DIRECTORY)/src/mesa/drivers/Makefile				\
 	$(DIRECTORY)/src/mesa/drivers/beos/*.cpp			\
 	$(DIRECTORY)/src/mesa/drivers/beos/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/common/*.[ch]			\
@@ -265,7 +231,6 @@ MAIN_FILES = \
 	$(DIRECTORY)/src/mesa/drivers/directfb/*.[ch]			\
 	$(DIRECTORY)/src/mesa/drivers/directfb/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/dos/*.[chS]			\
-	$(DIRECTORY)/src/mesa/drivers/fbdev/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/fbdev/glfbdev.c			\
 	$(DIRECTORY)/src/mesa/drivers/glide/*.[ch]			\
 	$(DIRECTORY)/src/mesa/drivers/ggi/*.[ch]			\
@@ -275,7 +240,6 @@ MAIN_FILES = \
 	$(DIRECTORY)/src/mesa/drivers/ggi/display/*.c			\
 	$(DIRECTORY)/src/mesa/drivers/ggi/display/fbdev.conf.in		\
 	$(DIRECTORY)/src/mesa/drivers/ggi/include/ggi/mesa/*.h		\
-	$(DIRECTORY)/src/mesa/drivers/osmesa/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/osmesa/Makefile.win		\
 	$(DIRECTORY)/src/mesa/drivers/osmesa/descrip.mms		\
 	$(DIRECTORY)/src/mesa/drivers/osmesa/osmesa.def			\
@@ -283,11 +247,8 @@ MAIN_FILES = \
 	$(DIRECTORY)/src/mesa/drivers/svga/*.[ch]			\
 	$(DIRECTORY)/src/mesa/drivers/windows/*/*.[ch]			\
 	$(DIRECTORY)/src/mesa/drivers/windows/*/*.def			\
-	$(DIRECTORY)/src/mesa/drivers/x11/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/x11/descrip.mms			\
 	$(DIRECTORY)/src/mesa/drivers/x11/*.[ch]			\
-	$(DIRECTORY)/src/mesa/drivers/glslcompiler/Makefile		\
-	$(DIRECTORY)/src/mesa/drivers/glslcompiler/glslcompiler.c	\
 	$(DIRECTORY)/src/mesa/ppc/*.[ch]				\
 	$(DIRECTORY)/src/mesa/sparc/*.[chS]				\
 	$(DIRECTORY)/src/mesa/x86/Makefile				\
@@ -300,48 +261,29 @@ MAIN_FILES = \
 	$(DIRECTORY)/progs/util/README					\
 	$(DIRECTORY)/progs/util/*.[ch]					\
 	$(DIRECTORY)/progs/util/sampleMakefile				\
-	$(DIRECTORY)/windows/VC8/
-
-EGL_FILES = \
-	$(DIRECTORY)/include/EGL/*.h					\
-	$(DIRECTORY)/include/GLES/*.h					\
-	$(DIRECTORY)/include/GLES2/*.h					\
-	$(DIRECTORY)/src/egl/Makefile					\
-	$(DIRECTORY)/src/egl/*/Makefile					\
-	$(DIRECTORY)/src/egl/*/*.[ch]					\
-	$(DIRECTORY)/src/egl/*/*/Makefile				\
-	$(DIRECTORY)/src/egl/*/*/*.[ch]					\
-
-GALLIUM_FILES = \
-	$(DIRECTORY)/src/mesa/state_tracker/*[ch]			\
-	$(DIRECTORY)/src/gallium/Makefile				\
-	$(DIRECTORY)/src/gallium/Makefile.template			\
-	$(DIRECTORY)/src/gallium/SConscript				\
-	$(DIRECTORY)/src/gallium/*/Makefile				\
-	$(DIRECTORY)/src/gallium/*/SConscript				\
-	$(DIRECTORY)/src/gallium/*/*/Makefile				\
-	$(DIRECTORY)/src/gallium/*/*/Makefile.template			\
-	$(DIRECTORY)/src/gallium/*/*/SConscript				\
-	$(DIRECTORY)/src/gallium/*/*/*.[ch]				\
-	$(DIRECTORY)/src/gallium/*/*/*.py				\
-	$(DIRECTORY)/src/gallium/*/*/*/Makefile				\
-	$(DIRECTORY)/src/gallium/*/*/*/SConscript			\
-	$(DIRECTORY)/src/gallium/*/*/*/*.[ch]				\
-	$(DIRECTORY)/src/gallium/*/*/*/*.py				\
-	$(DIRECTORY)/src/gallium/*/*/*/*/Makefile			\
-	$(DIRECTORY)/src/gallium/*/*/*/*/*.[ch]				\
-
+	$(DIRECTORY)/vms/analyze_map.com				\
+	$(DIRECTORY)/vms/xlib.opt					\
+	$(DIRECTORY)/vms/xlib_share.opt					\
+	$(DIRECTORY)/windows/VC6/mesa/gdi/gdi.dsp			\
+	$(DIRECTORY)/windows/VC6/mesa/glu/*.txt				\
+	$(DIRECTORY)/windows/VC6/mesa/glu/glu.dsp			\
+	$(DIRECTORY)/windows/VC6/mesa/mesa.dsw				\
+	$(DIRECTORY)/windows/VC6/mesa/mesa/mesa.dsp			\
+	$(DIRECTORY)/windows/VC6/mesa/osmesa/osmesa.dsp			\
+	$(DIRECTORY)/windows/VC7/mesa/gdi/gdi.vcproj			\
+	$(DIRECTORY)/windows/VC7/mesa/glu/glu.vcproj			\
+	$(DIRECTORY)/windows/VC7/mesa/mesa.sln				\
+	$(DIRECTORY)/windows/VC7/mesa/mesa/mesa.vcproj			\
+	$(DIRECTORY)/windows/VC7/mesa/osmesa/osmesa.vcproj

 DRI_FILES = \
 	$(DIRECTORY)/include/GL/internal/dri_interface.h		\
-	$(DIRECTORY)/include/GL/internal/glcore.h			\
 	$(DIRECTORY)/include/GL/internal/sarea.h			\
 	$(DIRECTORY)/src/glx/Makefile					\
 	$(DIRECTORY)/src/glx/x11/Makefile				\
 	$(DIRECTORY)/src/glx/x11/*.[ch]					\
 	$(DIRECTORY)/src/mesa/drivers/dri/Makefile			\
 	$(DIRECTORY)/src/mesa/drivers/dri/Makefile.template		\
-	$(DIRECTORY)/src/mesa/drivers/dri/dri.pc.in			\
 	$(DIRECTORY)/src/mesa/drivers/dri/common/xmlpool/*.[ch]		\
 	$(DIRECTORY)/src/mesa/drivers/dri/common/xmlpool/*.po		\
 	$(DIRECTORY)/src/mesa/drivers/dri/*/*.[chS]			\
@@ -351,14 +293,13 @@ DRI_FILES = \

 SGI_GLU_FILES = \
 	$(DIRECTORY)/src/glu/Makefile					\
-	$(DIRECTORY)/src/glu/glu.pc.in					\
+	$(DIRECTORY)/src/glu/descrip.mms				\
 	$(DIRECTORY)/src/glu/sgi/Makefile				\
-	$(DIRECTORY)/src/glu/sgi/Makefile.mgw				\
 	$(DIRECTORY)/src/glu/sgi/Makefile.win				\
+	$(DIRECTORY)/src/glu/sgi/Makefile.DJ				\
 	$(DIRECTORY)/src/glu/sgi/glu.def				\
 	$(DIRECTORY)/src/glu/sgi/dummy.cc				\
-	$(DIRECTORY)/src/glu/sgi/glu.exports				\
-	$(DIRECTORY)/src/glu/sgi/glu.exports.darwin			\
+	$(DIRECTORY)/src/glu/sgi/descrip.mms				\
 	$(DIRECTORY)/src/glu/sgi/mesaglu.opt				\
 	$(DIRECTORY)/src/glu/sgi/include/gluos.h			\
 	$(DIRECTORY)/src/glu/sgi/libnurbs/interface/*.h			\
@@ -385,20 +326,9 @@ GLW_FILES = \
 	$(DIRECTORY)/src/glw/*.[ch]			\
 	$(DIRECTORY)/src/glw/Makefile*			\
 	$(DIRECTORY)/src/glw/README			\
-	$(DIRECTORY)/src/glw/glw.pc.in			\
 	$(DIRECTORY)/src/glw/depend

-GLEW_FILES = \
-	$(DIRECTORY)/include/GL/glew.h			\
-	$(DIRECTORY)/include/GL/glxew.h			\
-	$(DIRECTORY)/include/GL/wglew.h			\
-	$(DIRECTORY)/src/glew/*.c			\
-	$(DIRECTORY)/src/glew/Makefile			\
-	$(DIRECTORY)/src/glew/SConscript		\
-	$(DIRECTORY)/src/glew/LICENSE.txt
-
 DEMO_FILES = \
-	$(GLEW_FILES)					\
 	$(DIRECTORY)/progs/beos/*.cpp			\
 	$(DIRECTORY)/progs/beos/Makefile		\
 	$(DIRECTORY)/progs/images/*.rgb			\
@@ -409,11 +339,10 @@ DEMO_FILES = \
 	$(DIRECTORY)/progs/demos/*.cxx			\
 	$(DIRECTORY)/progs/demos/*.dat			\
 	$(DIRECTORY)/progs/demos/README			\
-	$(DIRECTORY)/progs/fbdev/Makefile		\
-	$(DIRECTORY)/progs/fbdev/glfbdevtest.c		\
 	$(DIRECTORY)/progs/osdemos/Makefile		\
 	$(DIRECTORY)/progs/osdemos/*.c			\
 	$(DIRECTORY)/progs/xdemos/Makefile*		\
+	$(DIRECTORY)/progs/xdemos/descrip.mms		\
 	$(DIRECTORY)/progs/xdemos/*.[chf]		\
 	$(DIRECTORY)/progs/redbook/Makefile*		\
 	$(DIRECTORY)/progs/redbook/README		\
@@ -421,14 +350,13 @@ DEMO_FILES = \
 	$(DIRECTORY)/progs/samples/Makefile*		\
 	$(DIRECTORY)/progs/samples/README		\
 	$(DIRECTORY)/progs/samples/*.c			\
-	$(DIRECTORY)/progs/glsl/Makefile*		\
-	$(DIRECTORY)/progs/glsl/*.c			\
-	$(DIRECTORY)/progs/glsl/*.frag			\
-	$(DIRECTORY)/progs/glsl/*.vert			\
 	$(DIRECTORY)/progs/windml/Makefile.ugl		\
 	$(DIRECTORY)/progs/windml/*.c			\
 	$(DIRECTORY)/progs/windml/*.bmp			\
 	$(DIRECTORY)/progs/ggi/*.c			\
+	$(DIRECTORY)/windows/VC6/progs/demos/*.dsp	\
+	$(DIRECTORY)/windows/VC6/progs/progs.dsw	\
+	$(DIRECTORY)/windows/VC7/progs/demos/*.vcproj	\
 	$(DIRECTORY)/windows/VC7/progs/progs.sln

 GLUT_FILES = \
@@ -436,23 +364,21 @@ GLUT_FILES = \
 	$(DIRECTORY)/include/GL/glutf90.h		\
 	$(DIRECTORY)/src/glut/glx/Makefile*		\
 	$(DIRECTORY)/src/glut/glx/depend		\
-	$(DIRECTORY)/src/glut/glx/glut.pc.in		\
 	$(DIRECTORY)/src/glut/glx/*def			\
+	$(DIRECTORY)/src/glut/glx/descrip.mms		\
+	$(DIRECTORY)/src/glut/glx/mms_depend		\
 	$(DIRECTORY)/src/glut/glx/*.[ch]		\
 	$(DIRECTORY)/src/glut/beos/*.[ch]		\
 	$(DIRECTORY)/src/glut/beos/*.cpp		\
 	$(DIRECTORY)/src/glut/beos/Makefile		\
 	$(DIRECTORY)/src/glut/dos/*.[ch]		\
+	$(DIRECTORY)/src/glut/dos/Makefile.DJ		\
 	$(DIRECTORY)/src/glut/dos/PC_HW/*.[chS]		\
 	$(DIRECTORY)/src/glut/ggi/*.[ch]		\
 	$(DIRECTORY)/src/glut/ggi/Makefile		\
 	$(DIRECTORY)/src/glut/fbdev/Makefile		\
-	$(DIRECTORY)/src/glut/fbdev/*[ch]		\
-	$(DIRECTORY)/src/glut/mini/*[ch]		\
-	$(DIRECTORY)/src/glut/mini/glut.pc.in		\
-	$(DIRECTORY)/src/glut/directfb/Makefile		\
-	$(DIRECTORY)/src/glut/directfb/NOTES		\
-	$(DIRECTORY)/src/glut/directfb/*[ch]		\
+	$(DIRECTORY)/src/glut/fbdev/cursors.h		\
+	$(DIRECTORY)/src/glut/fbdev/glut_fbdev.c	\
 	$(DIRECTORY)/windows/VC6/progs/glut/glut.dsp	\
 	$(DIRECTORY)/windows/VC7/progs/glut/glut.vcproj

@@ -464,30 +390,13 @@ DEPEND_FILES = \
 	$(TOP)/src/glu/sgi/depend


-LIB_FILES = \
-	$(MAIN_FILES)		\
-	$(EGL_FILES)		\
-	$(GALLIUM_FILES)	\
-	$(DRI_FILES)		\
-	$(SGI_GLU_FILES)	\
-	$(GLW_FILES)
+LIB_FILES = $(MAIN_FILES) $(DRI_FILES) $(SGI_GLU_FILES) $(GLW_FILES)


 # Everything for new a Mesa release:
-tarballs: rm_depend configure aclocal.m4 lib_gz demo_gz glut_gz \
-	lib_bz2 demo_bz2 glut_bz2 lib_zip demo_zip glut_zip md5
+tarballs: rm_depend lib_gz demo_gz glut_gz lib_bz2 demo_bz2 glut_bz2 lib_zip demo_zip glut_zip md5


-# Helper for autoconf builds
-ACLOCAL = aclocal
-ACLOCAL_FLAGS =
-AUTOCONF = autoconf
-AC_FLAGS =
-aclocal.m4: configure.ac acinclude.m4
-	$(ACLOCAL) $(ACLOCAL_FLAGS)
-configure: configure.ac aclocal.m4 acinclude.m4
-	$(AUTOCONF) $(AC_FLAGS)
-
 rm_depend:
 	@for dep in $(DEPEND_FILES) ; do \
 		rm -f $$dep ; \
@@ -496,7 +405,6 @@ rm_depend:

 lib_gz:
 	rm -f configs/current ; \
-	rm -f configs/autoconf ; \
 	cd .. ; \
 	tar -cf $(LIB_NAME).tar $(LIB_FILES) ; \
 	gzip $(LIB_NAME).tar ; \
@@ -516,7 +424,6 @@ glut_gz:

 lib_bz2:
 	rm -f configs/current ; \
-	rm -f configs/autoconf ; \
 	cd .. ; \
 	tar -cf $(LIB_NAME).tar $(LIB_FILES) ; \
 	bzip2 $(LIB_NAME).tar ; \
@@ -536,7 +443,6 @@ glut_bz2:

 lib_zip:
 	rm -f configs/current ; \
-	rm -f configs/autoconf ; \
 	rm -f $(LIB_NAME).zip ; \
 	cd .. ; \
 	zip -qr $(LIB_NAME).zip $(LIB_FILES) ; \
@@ -564,6 +470,3 @@ md5:
 	@-md5sum $(GLUT_NAME).tar.gz
 	@-md5sum $(GLUT_NAME).tar.bz2
 	@-md5sum $(GLUT_NAME).zip
-
-.PHONY: tarballs rm_depend lib_gz demo_gz glut_gz lib_bz2 demo_bz2 \
-	glut_bz2 lib_zip demo_zip glut_zip md5
--- a/Makefile.DJ
+++ b/Makefile.DJ
@@ -0,0 +1,88 @@
+# Mesa 3-D graphics library
+# Version:  4.0
+# 
+# Copyright (C) 1999  Brian Paul   All Rights Reserved.
+# 
+# Permission is hereby granted, free of charge, to any person obtaining a
+# copy of this software and associated documentation files (the "Software"),
+# to deal in the Software without restriction, including without limitation
+# the rights to use, copy, modify, merge, publish, distribute, sublicense,
+# and/or sell copies of the Software, and to permit persons to whom the
+# Software is furnished to do so, subject to the following conditions:
+# 
+# The above copyright notice and this permission notice shall be included
+# in all copies or substantial portions of the Software.
+# 
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+# BRIAN PAUL BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+# DOS/DJGPP makefile for Mesa
+#
+#  Author: Daniel Borca
+#  Email : dborca@users.sourceforge.net
+#  Web   : http://www.geocities.com/dborca
+
+
+#
+#  Available options:
+#
+#    Environment variables:
+#	GLIDE		path to Glide3 SDK; used with FX.
+#			default = $(TOP)/glide3
+#	FX=1		build for 3dfx Glide3. Note that this disables
+#			compilation of most DMesa code and requires fxMesa.
+#			As a consequence, you'll need the DJGPP Glide3
+#			library to build any application.
+#			default = no
+#	X86=1		optimize for x86 (if possible, use MMX, SSE, 3DNow).
+#			default = no
+#
+#    Targets:
+#	all:		build everything
+#	libgl:		build GL
+#	libglu:		build GLU
+#	libglut:	build GLUT
+#	clean:		remove object files
+#	realclean:	remove all generated files
+#
+
+
+
+.PHONY : all libgl libglu libglut clean realclean
+
+CFLAGS = -Wall -W -pedantic
+CFLAGS += -O2 -ffast-math
+
+export CFLAGS
+
+ifeq ($(wildcard $(addsuffix /rm.exe,$(subst ;, ,$(PATH)))),)
+UNLINK = del $(subst /,\,$(1))
+else
+UNLINK = $(RM) $(1)
+endif
+
+all: libgl libglu libglut
+
+libgl: lib
+	$(MAKE) -f Makefile.DJ -C src/mesa
+libglu: lib
+	$(MAKE) -f Makefile.DJ -C src/glu/sgi
+libglut: lib
+	$(MAKE) -f Makefile.DJ -C src/glut/dos
+
+lib:
+	mkdir lib
+
+clean:
+	$(MAKE) -f Makefile.DJ clean -C src/mesa
+	$(MAKE) -f Makefile.DJ clean -C src/glu/mesa
+	$(MAKE) -f Makefile.DJ clean -C src/glu/sgi
+	$(MAKE) -f Makefile.DJ clean -C src/glut/dos
+
+realclean: clean
+	-$(call UNLINK,lib/*.a)
+	-$(call UNLINK,lib/*.dxe)
--- a/Makefile.mgw
+++ b/Makefile.mgw
@@ -0,0 +1,88 @@
+# Mesa 3-D graphics library
+# Version:  4.0
+# 
+# Copyright (C) 1999  Brian Paul   All Rights Reserved.
+# 
+# Permission is hereby granted, free of charge, to any person obtaining a
+# copy of this software and associated documentation files (the "Software"),
+# to deal in the Software without restriction, including without limitation
+# the rights to use, copy, modify, merge, publish, distribute, sublicense,
+# and/or sell copies of the Software, and to permit persons to whom the
+# Software is furnished to do so, subject to the following conditions:
+# 
+# The above copyright notice and this permission notice shall be included
+# in all copies or substantial portions of the Software.
+# 
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+# BRIAN PAUL BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+# MinGW makefile v1.2 for Mesa
+#
+#  Copyright (C) 2002 - Daniel Borca
+#  Email : dborca@users.sourceforge.net
+#  Web   : http://www.geocities.com/dborca
+
+
+#
+#  Available options:
+#
+#    Environment variables:
+#	GLIDE		path to Glide3 SDK; used with FX.
+#			default = $(TOP)/glide3
+#	FX=1		build for 3dfx Glide3. Note that this disables
+#			compilation of most WMesa code and requires fxMesa.
+#			As a consequence, you'll need the Win32 Glide3
+#			library to build any application.
+#			default = no
+#	ICD=1		build the installable client driver interface
+#			(windows opengl driver interface)
+#			default = no
+#	X86=1		optimize for x86 (if possible, use MMX, SSE, 3DNow).
+#			default = no
+#
+#    Targets:
+#	all:		build everything
+#	libgl:		build GL
+#	clean:		remove object files
+#	realclean:	remove all generated files
+#
+
+
+
+.PHONY : all libgl clean realclean
+
+ifeq ($(ICD),1)
+  # when -std=c99 mingw will not define WIN32
+  CFLAGS = -Wall -W -Werror
+else
+  # I love c89
+  CFLAGS = -Wall -W -pedantic
+endif
+CFLAGS += -O2 -ffast-math
+
+export CFLAGS
+
+ifeq ($(wildcard $(addsuffix /rm.exe,$(subst ;, ,$(PATH)))),)
+UNLINK = del $(subst /,\,$(1))
+else
+UNLINK = $(RM) $(1)
+endif
+
+all: libgl
+
+libgl: lib
+	$(MAKE) -f Makefile.mgw -C src/mesa
+
+lib:
+	mkdir lib
+
+clean:
+	$(MAKE) -f Makefile.mgw clean -C src/mesa
+
+realclean: clean
+	-$(call UNLINK,lib/*.a)
+	-$(call UNLINK,lib/*.dll)
--- a/167
+++ b/167
@@ -1,167 +0,0 @@
-#######################################################################
-# Top-level SConstruct
-#
-# For example, invoke scons as 
-#
-#   scons debug=1 dri=0 machine=x86
-#
-# to set configuration variables. Or you can write those options to a file
-# named config.py:
-#
-#   # config.py
-#   debug=1
-#   dri=0
-#   machine='x86'
-# 
-# Invoke
-#
-#   scons -h
-#
-# to get the full list of options. See scons manpage for more info.
-#  
-
-import os
-import os.path
-import sys
-
-import common
-
-#######################################################################
-# Configuration options
-
-default_statetrackers = 'mesa'
-
-if common.default_platform in ('linux', 'freebsd', 'darwin'):
-	default_drivers = 'softpipe,failover,i915simple,trace'
-	default_winsys = 'xlib'
-elif common.default_platform in ('winddk',):
-	default_drivers = 'softpipe,i915simple,trace'
-	default_winsys = 'all'
-else:
-	default_drivers = 'all'
-	default_winsys = 'all'
-
-opts = Variables('config.py')
-common.AddOptions(opts)
-opts.Add(ListVariable('statetrackers', 'state trackers to build', default_statetrackers,
-                     ['mesa', 'python']))
-opts.Add(ListVariable('drivers', 'pipe drivers to build', default_drivers,
-                     ['softpipe', 'failover', 'i915simple', 'i965simple', 'cell', 'trace', 'r300']))
-opts.Add(ListVariable('winsys', 'winsys drivers to build', default_winsys,
-                     ['xlib', 'intel', 'gdi', 'radeon']))
-
-opts.Add(EnumVariable('MSVS_VERSION', 'MS Visual C++ version', None, allowed_values=('7.1', '8.0', '9.0')))
-
-env = Environment(
-	options = opts,
-	tools = ['gallium'],
-	toolpath = ['#scons'],	
-	ENV = os.environ,
-)
-
-Help(opts.GenerateHelpText(env))
-
-# replicate options values in local variables
-debug = env['debug']
-dri = env['dri']
-llvm = env['llvm']
-machine = env['machine']
-platform = env['platform']
-
-# derived options
-x86 = machine == 'x86'
-ppc = machine == 'ppc'
-gcc = platform in ('linux', 'freebsd', 'darwin')
-msvc = platform in ('windows', 'winddk')
-
-Export([
-	'debug', 
-	'x86', 
-	'ppc', 
-	'dri', 
-	'llvm',
-	'platform',
-	'gcc',
-	'msvc',
-])
-
-
-#######################################################################
-# Environment setup
-
-# Includes
-env.Append(CPPPATH = [
-	'#/include',
-	'#/src/gallium/include',
-	'#/src/gallium/auxiliary',
-	'#/src/gallium/drivers',
-])
-
-
-# Posix
-if platform in ('posix', 'linux', 'freebsd', 'darwin'):
-	env.Append(CPPDEFINES = [
-		'_POSIX_SOURCE',
-		('_POSIX_C_SOURCE', '199309L'), 
-		'_SVID_SOURCE',
-		'_BSD_SOURCE', 
-		'_GNU_SOURCE',
-		
-		'PTHREADS',
-		'HAVE_POSIX_MEMALIGN',
-	])
-	env.Append(CPPPATH = ['/usr/X11R6/include'])
-	env.Append(LIBPATH = ['/usr/X11R6/lib'])
-	env.Append(LIBS = [
-		'm',
-		'pthread',
-		'expat',
-		'dl',
-	])
-
-
-# DRI
-if dri:
-	env.ParseConfig('pkg-config --cflags --libs libdrm')
-	env.Append(CPPDEFINES = [
-		('USE_EXTERNAL_DXTN_LIB', '1'), 
-		'IN_DRI_DRIVER',
-		'GLX_DIRECT_RENDERING',
-		'GLX_INDIRECT_RENDERING',
-	])
-
-# LLVM
-if llvm:
-	# See also http://www.scons.org/wiki/UsingPkgConfig
-	env.ParseConfig('llvm-config --cflags --ldflags --libs backend bitreader engine instrumentation interpreter ipo')
-	env.Append(CPPDEFINES = ['MESA_LLVM'])
-        # Force C++ linkage
-	env['LINK'] = env['CXX']
-
-# libGL
-if platform in ('linux', 'freebsd', 'darwin'):
-	env.Append(LIBS = [
-		'X11',
-		'Xext',
-		'Xxf86vm',
-		'Xdamage',
-		'Xfixes',
-	])
-
-# for debugging
-#print env.Dump()
-
-Export('env')
-
-
-#######################################################################
-# Invoke SConscripts
-
-# TODO: Build several variants at the same time?
-# http://www.scons.org/wiki/SimultaneousVariantBuilds
-
-SConscript(
-	'src/SConscript',
-	variant_dir = env['build'],
-	duplicate = 0 # http://www.scons.org/doc/0.97/HTML/scons-user/x2261.html
-)
--- a/acinclude.m4
+++ b/acinclude.m4
@@ -1,119 +0,0 @@
-# A few convenience macros for Mesa, mostly to keep all the platform
-# specifics out of configure.ac.
-
-# MESA_PIC_FLAGS()
-#
-# Find out whether to build PIC code using the option --enable-pic and
-# the configure enable_static/enable_shared settings. If PIC is needed,
-# figure out the necessary flags for the platform and compiler.
-#
-# The platform checks have been shamelessly taken from libtool and
-# stripped down to just what's needed for Mesa. See _LT_COMPILER_PIC in
-# /usr/share/aclocal/libtool.m4 or
-# http://git.savannah.gnu.org/gitweb/?p=libtool.git;a=blob;f=libltdl/m4/libtool.m4;hb=HEAD
-#
-AC_DEFUN([MESA_PIC_FLAGS],
-[AC_REQUIRE([AC_PROG_CC])dnl
-AC_ARG_VAR([PIC_FLAGS], [compiler flags for PIC code])
-AC_ARG_ENABLE([pic],
-    [AS_HELP_STRING([--disable-pic],
-        [compile PIC objects @<:@default=enabled for shared builds
-        on supported platforms@:>@])],
-    [enable_pic="$enableval"
-    test "x$enable_pic" = x && enable_pic=auto],
-    [enable_pic=auto])
-# disable PIC by default for static builds
-if test "$enable_pic" = auto && test "$enable_static" = yes; then
-    enable_pic=no
-fi
-# if PIC hasn't been explicitly disabled, try to figure out the flags
-if test "$enable_pic" != no; then
-    AC_MSG_CHECKING([for $CC option to produce PIC])
-    # allow the user's flags to override
-    if test "x$PIC_FLAGS" = x; then
-        # see if we're using GCC
-        if test "x$GCC" = xyes; then
-            case "$host_os" in
-            aix*|beos*|cygwin*|irix5*|irix6*|osf3*|osf4*|osf5*)
-                # PIC is the default for these OSes.
-                ;;
-            mingw*|os2*|pw32*)
-                # This hack is so that the source file can tell whether
-                # it is being built for inclusion in a dll (and should
-                # export symbols for example).
-                PIC_FLAGS="-DDLL_EXPORT"
-                ;;
-            darwin*|rhapsody*)
-                # PIC is the default on this platform
-                # Common symbols not allowed in MH_DYLIB files
-                PIC_FLAGS="-fno-common"
-                ;;
-            hpux*)
-                # PIC is the default for IA64 HP-UX and 64-bit HP-UX,
-                # but not for PA HP-UX.
-                case $host_cpu in
-                hppa*64*|ia64*)
-                    ;;
-                *)
-                    PIC_FLAGS="-fPIC"
-                    ;;
-                esac
-                ;;
-            *)
-                # Everyone else on GCC uses -fPIC
-                PIC_FLAGS="-fPIC"
-                ;;
-            esac
-        else # !GCC
-            case "$host_os" in
-            hpux9*|hpux10*|hpux11*)
-                # PIC is the default for IA64 HP-UX and 64-bit HP-UX,
-                # but not for PA HP-UX.
-                case "$host_cpu" in
-                hppa*64*|ia64*)
-                    # +Z the default
-                    ;;
-                *)
-                    PIC_FLAGS="+Z"
-                    ;;
-                esac
-                ;;
-            linux*|k*bsd*-gnu)
-                case `basename "$CC"` in
-                icc*|ecc*|ifort*)
-                    PIC_FLAGS="-KPIC"
-                    ;;
-                pgcc*|pgf77*|pgf90*|pgf95*)
-                    # Portland Group compilers (*not* the Pentium gcc
-                    # compiler, which looks to be a dead project)
-                    PIC_FLAGS="-fpic"
-                    ;;
-                ccc*)
-                    # All Alpha code is PIC.
-                    ;;
-                xl*)
-                    # IBM XL C 8.0/Fortran 10.1 on PPC
-                    PIC_FLAGS="-qpic"
-                    ;;
-                *)
-                    case `$CC -V 2>&1 | sed 5q` in
-                    *Sun\ C*|*Sun\ F*)
-                        # Sun C 5.9 or Sun Fortran
-                        PIC_FLAGS="-KPIC"
-                        ;;
-                    esac
-                esac
-                ;;
-            solaris*)
-                PIC_FLAGS="-KPIC"
-                ;;
-            sunos4*)
-                PIC_FLAGS="-PIC"
-                ;;
-            esac
-        fi # GCC
-    fi # PIC_FLAGS
-    AC_MSG_RESULT([$PIC_FLAGS])
-fi
-AC_SUBST([PIC_FLAGS])
-])# MESA_PIC_FLAGS
--- a/autogen.sh
+++ b/autogen.sh
@@ -1,18 +0,0 @@
-#! /bin/sh
-
-srcdir=`dirname "$0"`
-test -z "$srcdir" && srcdir=.
-
-SRCDIR=`(cd "$srcdir" && pwd)`
-ORIGDIR=`pwd`
-
-if test "x$SRCDIR" != "x$ORIGDIR"; then
-	echo "Mesa cannot be built when srcdir != builddir" 1>&2
-	exit 1
-fi
-
-MAKEFLAGS=""
-
-autoreconf -v --install || exit 1
-
-"$srcdir"/configure "$@"
--- a/bin/confdiff.sh
+++ b/bin/confdiff.sh
@@ -1,48 +0,0 @@
-#!/bin/bash -e
-
-usage()
-{
-	echo "Usage: $0 <target1> <target2>"
-	echo "Highlight differences between Mesa configs"
-	echo "Example:"
-	echo "  $0 linux linux-x86"
-}
-
-die()
-{
-	echo "$@" >&2
-	return 1
-}
-
-case "$1" in
-h|--help) usage; exit 0;;
-esac
-
-[ $# -lt 2 ] && die 2 targets needed. See $0 --help
-target1=$1
-target2=$2
-
-topdir=$(cd "`dirname $0`"/..; pwd)
-cd "$topdir"
-
-[ -f "./configs/$target1" ] || die Missing configs/$target1
-[ -f "./configs/$target2" ] || die Missing configs/$target2
-
-trap 'rm -f "$t1" "$t2"' 0
-
-t1=$(mktemp)
-t2=$(mktemp)
-
-make -f- -n -p <<EOF | sed '/^# Not a target/,/^$/d' > $t1
-TOP = .
-include \$(TOP)/configs/$target1
-default:
-EOF
-
-make -f- -n -p <<EOF | sed '/^# Not a target/,/^$/d' > $t2
-TOP = .
-include \$(TOP)/configs/$target2
-default:
-EOF
-
-diff -pu -I'^#' $t1 $t2
--- a/bin/config.guess
+++ b/bin/config.guess
--- a/bin/config.sub
+++ b/bin/config.sub
--- a/bin/install-sh
+++ b/bin/install-sh
@@ -1 +0,0 @@
-minstall
--- a/bin/installmesa
+++ b/bin/installmesa
@@ -62,10 +62,10 @@ fi

 set -v

-mkdir -p ${INCLUDE_DIR}
-mkdir -p ${INCLUDE_DIR}/GL
-# NOT YET: mkdir -p ${INCLUDE_DIR}/GLES
-mkdir -p ${LIB_DIR}
+mkdir ${INCLUDE_DIR}
+mkdir ${INCLUDE_DIR}/GL
+# NOT YET: mkdir ${INCLUDE_DIR}/GLES
+mkdir ${LIB_DIR}
 cp -f ${TOP}/include/GL/*.h ${INCLUDE_DIR}/GL
 cp -f ${TOP}/src/glw/*.h ${INCLUDE_DIR}/GL
 # NOT YET: cp -f ${TOP}/include/GLES/*.h ${INCLUDE_DIR}/GLES
--- a/bin/minstall
+++ b/bin/minstall
@@ -1,93 +0,0 @@
-#!/bin/sh
-
-
-# A minimal replacement for 'install' that supports installing symbolic links.
-# Only a limited number of options are supported:
-# -d dir          Create a directory
-# -m mode         Sets a file's mode when installing
-
-
-# If these commands aren't portable, we'll need some "if (arch)" type stuff
-SYMLINK="ln -s"
-MKDIR="mkdir -p"
-RM="rm -f"
-
-MODE=""
-
-if [ "$1" = "-d" ] ; then
-	# make a directory path
-	$MKDIR "$2"
-	exit 0
-fi
-
-if [ "$1" = "-m" ] ; then
-	# set file mode
-	MODE=$2
-	shift 2
-fi
-
-# install file(s) into destination
-if [ $# -ge 2 ] ; then
-
-	# Last cmd line arg is the dest dir
-	for FILE in $@ ; do
-		DEST="$FILE"
-	done
-
-	# Loop over args, moving them to DEST directory
-	I=1
-	for FILE in $@ ; do
-		if [ $I = $# ] ; then
-			# stop, don't want to install $DEST into $DEST
-			exit 0
-		fi
-
-		PWDSAVE=`pwd`
-
-		# determine file's type
-		if [ -h "$FILE" ] ; then
-			#echo $FILE is a symlink
-			# Unfortunately, cp -d isn't universal so we have to
-			# use a work-around.
-
-			# Use ls -l to find the target that the link points to
-			LL=`ls -l "$FILE"`
-			for L in $LL ; do
-				TARGET=$L
-			done
-			#echo $FILE is a symlink pointing to $TARGET
-
-			FILE=`basename "$FILE"`
-			# Go to $DEST and make the link
-			cd "$DEST"        # pushd
-				$RM "$FILE"
-				$SYMLINK "$TARGET" "$FILE"
-			cd "$PWDSAVE"     # popd
-
-		elif [ -f "$FILE" ] ; then
-			#echo "$FILE" is a regular file
-			# Only copy if the files differ
-			if ! cmp -s $FILE $DEST/`basename $FILE`; then
-				$RM "$DEST/`basename $FILE`"
-				cp "$FILE" "$DEST"
-			fi
-			if [ $MODE ] ; then
-				FILE=`basename "$FILE"`
-				chmod $MODE "$DEST/$FILE"
-			fi
-		else
-			echo "Unknown type of argument: " "$FILE"
-			exit 1
-		fi
-
-		I=`expr $I + 1`
-	done
-
-	exit 0
-fi
-
-# If we get here, we didn't find anything to do
-echo "Usage:"
-echo "  install -d dir                      Create named directory"
-echo "  install [-m mode] file [...] dest   Install files in destination"
-
--- a/bin/mklib
+++ b/bin/mklib
@@ -34,7 +34,6 @@ MINOR=0
 PATCH=""
 DEPS=""
 LINK=""
-LDFLAGS=""
 CPLUSPLUS=0
 STATIC=0
 DLOPEN=0
@@ -43,7 +42,7 @@ ARCH="auto"
 ARCHOPT=""
 NOPREFIX=0
 EXPORTS=""
-ID=""
+

 #
 # Parse arguments
@@ -61,21 +60,17 @@ do
 	    echo '  -minor N      specifies minor version number (default is 0)'
 	    echo '  -patch N      specifies patch version number (default is 0)'
 	    echo '  -lLIBRARY     specifies a dependency on LIBRARY'
-	    echo '  -LDIR         search in DIR for library dependencies at build time'
-	    echo '  -RDIR         search in DIR for library dependencies at run time'
+	    echo '  -LDIR         search in DIR for library dependencies'
 	    echo '  -linker L     explicity specify the linker program to use (eg: gcc, g++)'
 	    echo '                Not observed on all systems at this time.'
-	    echo '  -ldflags OPT  specify any additional linker flags in OPT'
 	    echo '  -cplusplus    link with C++ runtime'
 	    echo '  -static       make a static library (default is dynamic/shared)'
 	    echo '  -dlopen       make a shared library suitable for dynamic loading'
 	    echo '  -install DIR  put resulting library file(s) in DIR'
 	    echo '  -arch ARCH    override using `uname` to determine host system'
 	    echo '  -archopt OPT  specify an extra achitecture-specific option OPT'
-	    echo '  -altopts OPTS alternate options to override all others'
 	    echo "  -noprefix     don't prefix library name with 'lib' nor add any suffix"
 	    echo '  -exports FILE only export the symbols listed in FILE'
-	    echo '  -id NAME      Sets the id of the dylib (Darwin)'
 	    echo '  -h, --help    display this information and exit'
 	    exit 1
 	    ;;
@@ -99,29 +94,12 @@ do
 	    shift 1;
 	    LINK=$1
 	    ;;
-	'-ldflags')
-	    shift 1;
-	    LDFLAGS=$1
-	    ;;
 	-l*)
 	    DEPS="$DEPS $1"
 	    ;;
 	-L*)
 	    DEPS="$DEPS $1"
 	    ;;
-	-R*)
-	    DEPS="$DEPS $1"
-	    ;;
-	-Wl*)
-            DEPS="$DEPS $1"
-            ;;
-	-pthread)
-	    # this is a special case (see bugzilla 10876)
-	    DEPS="$DEPS $1"
-	    ;;
-	'-pthread')
-	    DEPS="$DEPS -pthread"
-	    ;;
 	'-cplusplus')
 	    CPLUSPLUS=1
 	    ;;
@@ -143,10 +121,6 @@ do
 	    shift 1;
 	    ARCHOPT=$1
 	    ;;
-	'-altopts')
-            shift 1;
-            ALTOPTS=$1
-            ;;
 	'-noprefix')
 	    NOPREFIX=1
 	    ;;
@@ -154,10 +128,6 @@ do
 	    shift 1;
 	    EXPORTS=$1
 	    ;;
-	'-id')
-	    shift 1;
-	    ID=$1
-	    ;;
 	-*)
 	    echo "mklib: Unknown option: " $1 ;
 	    exit 1
@@ -176,23 +146,6 @@ if [ ${ARCH} = "auto" ] ; then
 fi


-if [ $STATIC = 1 ]; then
-    # filter out linker options inside object list
-    NEWOBJECTS=""
-    for OBJ in $OBJECTS ; do
-	case $OBJ in
-	    -Wl,*)
-		echo "mklib: warning: ignoring $OBJ for static library"
-		;;
-	    *)
-		NEWOBJECTS="$NEWOBJECTS $OBJ"
-		;;
-	esac
-    done
-    OBJECTS=$NEWOBJECTS
-fi
-
-
 #
 # Error checking
 #
@@ -218,7 +171,6 @@ if [  ]  ; then
    echo PATCH is $PATCH
    echo DEPS are $DEPS
    echo "EXPORTS in" $EXPORTS
-    echo ID is $ID
    echo "-----------------"
 fi

@@ -228,7 +180,7 @@ fi
 #
 case $ARCH in

-    'Linux' | 'OpenBSD' | 'DragonFly' | 'GNU' | GNU/*)
+    'Linux' | 'OpenBSD' | 'GNU' | GNU/*)
 	# we assume gcc

 	if [ "x$LINK" = "x" ] ; then
@@ -243,13 +195,8 @@ case $ARCH in
 	if [ $NOPREFIX = 1 ] ; then
 	    # No "lib" or ".so" part
 	    echo "mklib: Making" $ARCH "shared library: " ${LIBNAME}
-	    case $ARCH in 'Linux' | 'GNU' | GNU/*)
-		OPTS="-Xlinker -Bsymbolic -shared"
-	    ;;
-	    *)
-		OPTS="-shared"
-	    ;;
-	    esac
+	    #OPTS="-shared -Wl,-soname,${LIBNAME}"  # soname???
+	    OPTS="-shared"

 	    # Check if objects are 32-bit and we're running in 64-bit
 	    # environment.  If so, pass -m32 flag to linker.
@@ -259,54 +206,21 @@ case $ARCH in
 		OPTS="-m32 ${OPTS}"
 	    fi

-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
-
            rm -f ${LIBNAME}
            # make lib
-            ${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
+            ${LINK} ${OPTS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
            # finish up
            FINAL_LIBS="${LIBNAME}"
        elif [ $STATIC = 1 ] ; then
-            LIBNAME="lib${LIBNAME}.a"     # prefix with "lib", suffix with ".a"
-            echo "mklib: Making" $ARCH "static library: " ${LIBNAME}
+	    LIBNAME="lib${LIBNAME}"     # prefix with "lib"
+            echo "mklib: Making" $ARCH "static library: " ${LIBNAME}.a
            LINK="ar"
            OPTS="-ru"
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
-            rm -f ${LIBNAME}
-
-	    # expand any .a objects into constituent .o files.
-	    NEWOBJECTS=""
-	    DELETIA=""
-	    for OBJ in $OBJECTS ; do
-		case $OBJ in
-		    *.a)
-			# extract the .o files from this .a archive
-			FILES=`ar t $OBJ`
-			ar x $OBJ
-			NEWOBJECTS="$NEWOBJECTS $FILES"
-			# keep track of temporary .o files and delete them below
-			DELETIA="$DELETIA $FILES"
-			;;
-		    *)
-			# ordinary .o file
-			NEWOBJECTS="$NEWOBJECTS $OBJ"
-			;;
-		esac
-	    done
-
            # make lib
-            ${LINK} ${OPTS} ${LIBNAME} ${NEWOBJECTS}
-            ranlib ${LIBNAME}
-
-	    # remove temporary extracted .o files
-	    rm -f ${DELETIA}
-
+            ${LINK} ${OPTS} ${LIBNAME}.a ${OBJECTS}
+	    ranlib ${LIBNAME}.a
            # finish up
-            FINAL_LIBS=${LIBNAME}
+            FINAL_LIBS=${LIBNAME}.a
        else
 	    LIBNAME="lib${LIBNAME}"     # prefix with "lib"
 	    case $ARCH in 'Linux' | 'GNU' | GNU/*)
@@ -319,7 +233,7 @@ case $ARCH in
 	    if [ $EXPORTS ] ; then
 		#OPTS="${OPTS} -Xlinker --retain-symbols-file ${EXPORTS}"
 		# Make the 'exptmp' file for --version-script option
-		echo "{" > exptmp
+		echo "VERSION_${MAJOR}.${MINOR} {" > exptmp
 		echo "global:" >> exptmp
 		sed 's/$/;/' ${EXPORTS} >> exptmp
 		echo "local:" >> exptmp
@@ -336,9 +250,6 @@ case $ARCH in
 	    if [ "${ABI32}" -a `uname -m` = "x86_64" ] ; then
 		OPTS="-m32 ${OPTS}"
 	    fi
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi

 	    if [ x${PATCH} = "x" ] ; then
 		VERSION="${MAJOR}.${MINOR}"
@@ -354,7 +265,7 @@ case $ARCH in
            rm -f ${LIBNAME}.so

            # make lib
-            ${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME}.so.${VERSION} ${OBJECTS} ${DEPS}
+            ${LINK} ${OPTS} -o ${LIBNAME}.so.${VERSION} ${OBJECTS} ${DEPS}
            # make usual symlinks
            ln -s ${LIBNAME}.so.${VERSION} ${LIBNAME}.so.${MAJOR}
            ln -s ${LIBNAME}.so.${MAJOR} ${LIBNAME}.so
@@ -372,9 +283,7 @@ case $ARCH in
 	    ar -ruv ${LIBNAME} ${OBJECTS}
 	    FINAL_LIBS=${LIBNAME}
 	else
-	    if [ $NOPREFIX = 0 ] ; then
-		LIBNAME="lib${LIBNAME}.so"
-	    fi
+	    LIBNAME="lib${LIBNAME}.so"
 	    echo "mklib: Making SunOS shared library: " ${LIBNAME}

 	    if [ "x$LINK" = "x" ] ; then
@@ -388,7 +297,7 @@ case $ARCH in
 			# use g++
 			LINK="g++"
 		    else
-			echo "mklib: warning: can't find C++ compiler, trying CC."
+			echo "mklib: warning: can't find C++ comiler, trying CC."
 			LINK="CC"
 		    fi
 		else
@@ -414,55 +323,20 @@ case $ARCH in
 		fi
 	    fi

-	    # If using Sun C++ compiler, need to tell it not to add runpaths
-	    # that are specific to the build machine
-	    if [ ${LINK} = "CC" ] ; then
-		OPTS="${OPTS} -norunpath"
-	    fi
-
-	    # Solaris linker requires explicitly listing the Standard C & C++
-	    # libraries in the link path when building shared objects
-	    if [ ${LINK} = "CC" ] ; then
-		DEPS="${DEPS} -lCrun"
-	    fi
-	    DEPS="${DEPS} -lc"
-
-	    if [ $EXPORTS ] ; then
-		# Make the 'mapfile.scope' linker mapfile
-		echo "{" > mapfile.scope
-		echo "global:" >> mapfile.scope
-		sed 's/$/;/' ${EXPORTS} >> mapfile.scope
-		echo "local:" >> mapfile.scope
-		echo "    *;" >> mapfile.scope
-		echo "};" >> mapfile.scope
-		OPTS="${OPTS} -Wl,-Mmapfile.scope"
-	    fi
-
 	    # Check if objects are SPARC v9
 	    # file says: ELF 64-bit MSB relocatable SPARCV9 Version 1
 	    set ${OBJECTS}
-	    if [ ${LINK} = "cc" -o ${LINK} = "CC" ] ; then
-		SPARCV9=`file $1 | grep SPARCV9`
-		if [ "${SPARCV9}" ] ; then
-		    OPTS="${OPTS} -xarch=v9"
-		fi
+	    SPARCV9=`file $1 | grep SPARCV9`
+	    if [ "${SPARCV9}" ] ; then
+		OPTS="${OPTS} -xarch=v9"
 	    fi
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi

 	    # for debug:
 	    #echo "mklib: linker is" ${LINK} ${OPTS}
-	    if [ $NOPREFIX = 1 ] ; then
-		rm -f ${LIBNAME}
-		${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
-		FINAL_LIBS="${LIBNAME}"
-	    else
-		rm -f ${LIBNAME}.${MAJOR} ${LIBNAME}
-		${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME}.${MAJOR} -h ${LIBNAME}.${MAJOR} ${OBJECTS} ${DEPS}
-		ln -s ${LIBNAME}.${MAJOR} ${LIBNAME}
-		FINAL_LIBS="${LIBNAME}.${MAJOR} ${LIBNAME}"
-	    fi
+	    rm -f ${LIBNAME}.${MAJOR} ${LIBNAME}
+	    ${LINK} ${OPTS} -o ${LIBNAME}.${MAJOR} ${OBJECTS} ${DEPS}
+	    ln -s ${LIBNAME}.${MAJOR} ${LIBNAME}
+	    FINAL_LIBS="${LIBNAME}.${MAJOR} ${LIBNAME}"
 	fi
 	;;

@@ -482,11 +356,8 @@ case $ARCH in
 	    # No "lib" or ".so" part
 	    echo "mklib: Making FreeBSD shared library: " ${LIBNAME}
 	    OPTS="-shared"
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
 	    rm -f ${LIBNAME}
-	    ${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
+	    ${LINK} ${OPTS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
 	    FINAL_LIBS=${LIBNAME}
        elif [ $STATIC = 1 ] ; then
 	    STLIB="lib${LIBNAME}.a"
@@ -498,12 +369,9 @@ case $ARCH in
 	else
 	    SHLIB="lib${LIBNAME}.so.${MAJOR}"
 	    OPTS="-shared -Wl,-soname,${SHLIB}"
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
 	    echo "mklib: Making FreeBSD shared library: " ${SHLIB}
 	    rm -f ${SHLIB}
-	    ${LINK} ${OPTS} ${LDFLAGS} -o ${SHLIB} ${OBJECTS} ${DEPS}
+	    ${LINK} ${OPTS} -o ${SHLIB} ${OBJECTS} ${DEPS}
 	    ln -sf ${SHLIB} "lib${LIBNAME}.so"
 	    FINAL_LIBS="${SHLIB} lib${LIBNAME}.so"
 	fi
@@ -554,10 +422,6 @@ case $ARCH in
 		exit 1
 	    fi

-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
-
 	    if [ $CPLUSPLUS = 1 ] ; then
 		LINK="CC"
 	    else
@@ -565,7 +429,7 @@ case $ARCH in
 	    fi

 	    echo "mklib: Making IRIX " ${ABI} " shared library: " ${LIBNAME}
-	    ${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
+	    ${LINK} ${OPTS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
 	    FINAL_LIBS=${LIBNAME}
 	fi
 	;;
@@ -638,16 +502,12 @@ case $ARCH in
 		}
 	    }' | sort -u >> ${EXPFILE}

-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
-
            # On AIX a shared library is linked differently when
            # you want to dlopen the file
 	    if [ $DLOPEN = "1" ] ; then
-		cc -G ${OPTS} ${LDFLAGS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
+		cc -G ${OPTS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
 	    else
-		cc ${OPTS} ${LDFLAGS} -o ${OFILE} ${OBJECTS} ${DEPS}
+		cc ${OPTS} -o ${OFILE} ${OBJECTS} ${DEPS}
 		ar ${X64} -r ${LIBNAME} ${OFILE}
 	    fi

@@ -693,9 +553,6 @@ case $ARCH in
            echo "mklib: Making Darwin static library: " ${LIBNAME}
            LINK="ar"
            OPTS="-ruvs"
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
            ${LINK} ${OPTS} ${LIBNAME} ${OBJECTS}
            FINAL_LIBS=${LIBNAME}
        else
@@ -704,46 +561,22 @@ case $ARCH in
                LIBSUFFIX="bundle"
                OPTS="${ARCHOPT} -bundle -multiply_defined suppress"
            else
-                LIBSUFFIX="dylib"
-                if [ -z "$ID" ] ; then
-                    ID="lib${LIBNAME}.${MAJOR}.${LIBSUFFIX}"
-                fi
-                OPTS="${ARCHOPT} -dynamiclib -multiply_defined suppress -current_version ${MAJOR}.${MINOR}.0 -compatibility_version ${MAJOR}.${MINOR}.0 -install_name ${ID}"
+		LIBSUFFIX="dylib"
+                OPTS="${ARCHOPT} -dynamiclib -multiply_defined suppress -current_version ${MAJOR}.${MINOR}.0 -compatibility_version ${MAJOR}.${MINOR}.0 -install_name lib${LIBNAME}.${MAJOR}.${LIBSUFFIX}"
            fi
-
-            if [ ${EXPORTS} ] ; then
-                if [ -f ${EXPORTS}".darwin" ] ; then
-                    EXPORTS=$EXPORTS".darwin"
-                fi
-                OPTS="${OPTS} -exported_symbols_list ${EXPORTS}"
-            fi
-
-            LINKNAME="lib${LIBNAME}.${MAJOR}.${LIBSUFFIX}"
-            LINKNAME2="lib${LIBNAME}.${LIBSUFFIX}"
-            LIBNAME="lib${LIBNAME}.${MAJOR}.${MINOR}.${LIBSUFFIX}"
+            LINKNAME="lib${LIBNAME}.${LIBSUFFIX}"
+            LIBNAME="lib${LIBNAME}.${MAJOR}.${LIBSUFFIX}"

 	    # examine first object to determine ABI
    	    set ${OBJECTS}
-            ABI_PPC=`file $1 | grep ' ppc'`
-            ABI_I386=`file $1 | grep ' i386'`
-            ABI_PPC64=`file $1 | grep ' ppc64'`
-            ABI_X86_64=`file $1 | grep ' x86_64'`
-            if [ "${ABI_PPC}" ] ; then
-                OPTS="${OPTS} -arch ppc"
-            fi
-            if [ "${ABI_I386}" ] ; then
-                OPTS="${OPTS} -arch i386"
-            fi
-            if [ "${ABI_PPC64}" ] ; then
-                OPTS="${OPTS} -arch ppc64"
-            fi
-            if [ "${ABI_X86_64}" ] ; then
-                OPTS="${OPTS} -arch x86_64"
-            fi
-
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
+	    ABI_PPC=`file $1 | grep 'object ppc'`
+	    ABI_I386=`file $1 | grep 'object i386'`
+	    if [ "${ABI_PPC}" ] ; then
+		OPTS="${OPTS} -arch ppc"
+	    fi
+	    if [ "${ABI_I386}" ] ; then
+		OPTS="${OPTS} -arch i386"
+	    fi

 	    # XXX can we always add -isysroot /Developer/SDKs/MacOSX10.4u.sdk
 	    # to OPTS here?
@@ -756,11 +589,9 @@ case $ARCH in
 	    fi

            echo "mklib: Making Darwin shared library: " ${LIBNAME}
-
-            ${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
+            ${LINK} ${OPTS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
            ln -s ${LIBNAME} ${LINKNAME}
-            ln -s ${LIBNAME} ${LINKNAME2}
-            FINAL_LIBS="${LIBNAME} ${LINKNAME} ${LINKNAME2}"
+            FINAL_LIBS="${LIBNAME} ${LINKNAME}"
        fi
        ;;

@@ -812,9 +643,6 @@ case $ARCH in
            echo "mklib: Making Intel ICC static library: " ${LIBNAME}.a
            LINK="ar"
            OPTS="-ruv"
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
            # make lib
            ${LINK} ${OPTS} ${LIBNAME}.a ${OBJECTS}
            # finish up
@@ -825,9 +653,6 @@ case $ARCH in
            else
                 OPTS="-shared"
            fi
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
            VERSION="${MAJOR}.${MINOR}.${PATCH}"
            echo "mklib: Making Intel ICC shared library: " ${LIBNAME}.so.${VERSION}

@@ -841,7 +666,7 @@ case $ARCH in
            rm -f ${LIBNAME}.so.${MAJOR}
            rm -f ${LIBNAME}.so
            # make lib
-            ${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME}.so.${VERSION} ${OBJECTS} ${DEPS}
+            ${LINK} ${OPTS} -o ${LIBNAME}.so.${VERSION} ${OBJECTS} ${DEPS}
            # make usual symlinks
            ln -s ${LIBNAME}.so.${VERSION} ${LIBNAME}.so.${MAJOR}
            ln -s ${LIBNAME}.so.${MAJOR} ${LIBNAME}.so
@@ -885,17 +710,6 @@ case $ARCH in

     CYGWIN*)
 	# GCC-based environment
-	if [ $NOPREFIX = 1 ] ; then
-	    # No "lib" or ".so" part
-	    echo "mklib: Making CYGWIN shared library: " ${LIBNAME}
-	    OPTS="-shared -Wl,--enable-auto-image-base"
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
-	    rm -f ${LIBNAME}
-	    ${LINK} ${OPTS} ${LDFLAGS} -o ${LIBNAME} ${OBJECTS} ${DEPS}
-	    FINAL_LIBS=${LIBNAME}
-        else
 	CYGNAME="cyg${LIBNAME}"     # prefix with "cyg"
 	LIBNAME="lib${LIBNAME}"     # prefix with "lib"

@@ -903,20 +717,14 @@ case $ARCH in
            echo "mklib: Making" $ARCH "static library: " ${LIBNAME}.a
            LINK="ar"
            OPTS="-ru"
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
            # make lib
            ${LINK} ${OPTS} ${LIBNAME}.a ${OBJECTS}
 	    ranlib ${LIBNAME}.a
            # finish up
            FINAL_LIBS=${LIBNAME}.a
        else
-	    OPTS="-shared -Wl,--enable-auto-image-base -Wl,-export-all -Wl,--out-implib=${LIBNAME}-${MAJOR}.dll.a"
-            if [ "${ALTOPTS}" ] ; then
-                OPTS=${ALTOPTS}
-            fi
-            echo "mklib: Making" $ARCH "shared library: " ${CYGNAME}-${MAJOR}.dll
+	    OPTS="-shared -Wl,-export-all -Wl,--out-implib=${LIBNAME}-${MAJOR}.dll.a"
+            echo "mklib: Making" $ARCH "shared library: " ${LIBNAME}-${MAJOR}.dll

            if [ $CPLUSPLUS = 1 ] ; then
                LINK="g++"
@@ -925,13 +733,12 @@ case $ARCH in
            fi

            # rm any old libs
-            rm -f ${CYGNAME}-${MAJOR}.dll
-            rm -f ${LIBNAME}-${MAJOR}.dll.a
+            rm -f ${LIBNAME}-${MAJOR}.dll
            rm -f ${LIBNAME}.dll.a
            rm -f ${LIBNAME}.a

            # make lib
-            ${LINK} ${OPTS} ${LDFLAGS} -o ${CYGNAME}-${MAJOR}.dll ${OBJECTS} ${DEPS}
+            ${LINK} ${OPTS} -o ${CYGNAME}-${MAJOR}.dll ${OBJECTS} ${DEPS}
            # make usual symlinks
            ln -s ${LIBNAME}-${MAJOR}.dll.a ${LIBNAME}.dll.a
            # finish up
@@ -939,7 +746,6 @@ case $ARCH in
 	    # special case for installing in bin
            FINAL_BINS="${CYGNAME}-${MAJOR}.dll"
        fi
-        fi
 	;;

    'example')
@@ -971,6 +777,5 @@ esac
 #
 if [ ${INSTALLDIR} != "." ] ; then
    echo "mklib: Installing" ${FINAL_LIBS} "in" ${INSTALLDIR}
-    test -d ${INSTALLDIR} || mkdir -p ${INSTALLDIR}
    mv ${FINAL_LIBS} ${INSTALLDIR}/
 fi
--- a/bin/raw2png.py
+++ b/bin/raw2png.py
@@ -1,366 +0,0 @@
-#!/usr/bin/env python
-##########################################################################
-# 
-# Copyright 2008 Tungsten Graphics, Inc., Cedar Park, Texas.
-# All Rights Reserved.
-# 
-# Permission is hereby granted, free of charge, to any person obtaining a
-# copy of this software and associated documentation files (the
-# "Software"), to deal in the Software without restriction, including
-# without limitation the rights to use, copy, modify, merge, publish,
-# distribute, sub license, and/or sell copies of the Software, and to
-# permit persons to whom the Software is furnished to do so, subject to
-# the following conditions:
-# 
-# The above copyright notice and this permission notice (including the
-# next paragraph) shall be included in all copies or substantial portions
-# of the Software.
-# 
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
-# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
-# IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
-# ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
-# TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
-# SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-# 
-##########################################################################
-
-
-import os.path
-import sys
-import struct
-import Image # http://www.pythonware.com/products/pil/
-
-PIPE_FORMAT_LAYOUT_RGBAZS   = 0
-PIPE_FORMAT_LAYOUT_YCBCR    = 1
-PIPE_FORMAT_LAYOUT_DXT      = 2
-PIPE_FORMAT_LAYOUT_MIXED    = 3
-
-PIPE_FORMAT_COMP_R    = 0
-PIPE_FORMAT_COMP_G    = 1
-PIPE_FORMAT_COMP_B    = 2
-PIPE_FORMAT_COMP_A    = 3
-PIPE_FORMAT_COMP_0    = 4
-PIPE_FORMAT_COMP_1    = 5
-PIPE_FORMAT_COMP_Z    = 6
-PIPE_FORMAT_COMP_S    = 7
-
-PIPE_FORMAT_TYPE_UNKNOWN = 0
-PIPE_FORMAT_TYPE_FLOAT   = 1
-PIPE_FORMAT_TYPE_UNORM   = 2
-PIPE_FORMAT_TYPE_SNORM   = 3
-PIPE_FORMAT_TYPE_USCALED = 4
-PIPE_FORMAT_TYPE_SSCALED = 5
-PIPE_FORMAT_TYPE_SRGB    = 6
-PIPE_FORMAT_TYPE_FIXED   = 7
-
-def _PIPE_FORMAT_RGBAZS( SWZ, SIZEX, SIZEY, SIZEZ, SIZEW, EXP2, TYPE ):
-   return ((PIPE_FORMAT_LAYOUT_RGBAZS << 0) |\
-   ((SWZ) << 2) |\
-   ((SIZEX) << 14) |\
-   ((SIZEY) << 17) |\
-   ((SIZEZ) << 20) |\
-   ((SIZEW) << 23) |\
-   ((EXP2) << 26) |\
-   ((TYPE) << 29) )
-
-def _PIPE_FORMAT_SWZ( SWZX, SWZY, SWZZ, SWZW ):
-	return (((SWZX) << 0) | ((SWZY) << 3) | ((SWZZ) << 6) | ((SWZW) << 9))
-
-def _PIPE_FORMAT_RGBAZS_1( SWZ, SIZEX, SIZEY, SIZEZ, SIZEW, TYPE ):
-	return _PIPE_FORMAT_RGBAZS( SWZ, SIZEX, SIZEY, SIZEZ, SIZEW, 0, TYPE )
-
-def _PIPE_FORMAT_RGBAZS_2( SWZ, SIZEX, SIZEY, SIZEZ, SIZEW, TYPE ):
-    _PIPE_FORMAT_RGBAZS( SWZ, SIZEX, SIZEY, SIZEZ, SIZEW, 1, TYPE )
-
-def _PIPE_FORMAT_RGBAZS_8( SWZ, SIZEX, SIZEY, SIZEZ, SIZEW, TYPE ):
-	return _PIPE_FORMAT_RGBAZS( SWZ, SIZEX, SIZEY, SIZEZ, SIZEW, 3, TYPE )
-
-def _PIPE_FORMAT_RGBAZS_64( SWZ, SIZEX, SIZEY, SIZEZ, SIZEW, TYPE ):
-	return _PIPE_FORMAT_RGBAZS( SWZ, SIZEX, SIZEY, SIZEZ, SIZEW, 6, TYPE )
-
-def _PIPE_FORMAT_MIXED( SWZ, SIZEX, SIZEY, SIZEZ, SIZEW, SIGNX, SIGNY, SIGNZ, SIGNW, NORMALIZED, SCALE8 ):
-    return ((PIPE_FORMAT_LAYOUT_MIXED << 0) |\
-    ((SWZ) << 2) |\
-    ((SIZEX) << 14) |\
-    ((SIZEY) << 17) |\
-    ((SIZEZ) << 20) |\
-    ((SIZEW) << 23) |\
-    ((SIGNX) << 26) |\
-    ((SIGNY) << 27) |\
-    ((SIGNZ) << 28) |\
-    ((SIGNW) << 29) |\
-    ((NORMALIZED) << 30) |\
-    ((SCALE8) << 31) )
-
-
-_PIPE_FORMAT_R001 = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_1 )
-_PIPE_FORMAT_RG01 = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_G, PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_1 )
-_PIPE_FORMAT_RGB1 = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_G, PIPE_FORMAT_COMP_B, PIPE_FORMAT_COMP_1 )
-_PIPE_FORMAT_RGBA = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_G, PIPE_FORMAT_COMP_B, PIPE_FORMAT_COMP_A )
-_PIPE_FORMAT_ARGB = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_A, PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_G, PIPE_FORMAT_COMP_B )
-_PIPE_FORMAT_ABGR = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_A, PIPE_FORMAT_COMP_B, PIPE_FORMAT_COMP_G, PIPE_FORMAT_COMP_R )
-_PIPE_FORMAT_BGRA = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_B, PIPE_FORMAT_COMP_G, PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_A )
-_PIPE_FORMAT_1RGB = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_1, PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_G, PIPE_FORMAT_COMP_B )
-_PIPE_FORMAT_1BGR = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_1, PIPE_FORMAT_COMP_B, PIPE_FORMAT_COMP_G, PIPE_FORMAT_COMP_R )
-_PIPE_FORMAT_BGR1 = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_B, PIPE_FORMAT_COMP_G, PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_1 )
-_PIPE_FORMAT_0000 = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_0 )
-_PIPE_FORMAT_000R = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_R )
-_PIPE_FORMAT_RRR1 = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_1 )
-_PIPE_FORMAT_RRRR = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_R )
-_PIPE_FORMAT_RRRG = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_R, PIPE_FORMAT_COMP_G )
-_PIPE_FORMAT_Z000 = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_Z, PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_0 )
-_PIPE_FORMAT_0Z00 = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_Z, PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_0 )
-_PIPE_FORMAT_SZ00 = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_S, PIPE_FORMAT_COMP_Z, PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_0 )
-_PIPE_FORMAT_ZS00 = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_Z, PIPE_FORMAT_COMP_S, PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_0 )
-_PIPE_FORMAT_S000 = _PIPE_FORMAT_SWZ( PIPE_FORMAT_COMP_S, PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_0, PIPE_FORMAT_COMP_0 )
-
-def _PIPE_FORMAT_YCBCR( REV ):
-   return ((PIPE_FORMAT_LAYOUT_YCBCR << 0) |\
-   ((REV) << 2) )
-
-def _PIPE_FORMAT_DXT( LEVEL, RSIZE, GSIZE, BSIZE, ASIZE ):
-    return ((PIPE_FORMAT_LAYOUT_DXT << 0) | \
-    ((LEVEL) << 2) | \
-    ((RSIZE) << 5) | \
-    ((GSIZE) << 8) | \
-    ((BSIZE) << 11) | \
-    ((ASIZE) << 14) )
-
-PIPE_FORMAT_NONE                  = _PIPE_FORMAT_RGBAZS_1 ( _PIPE_FORMAT_0000, 0, 0, 0, 0, PIPE_FORMAT_TYPE_UNKNOWN )
-PIPE_FORMAT_A8R8G8B8_UNORM        = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_ARGB, 1, 1, 1, 1, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_X8R8G8B8_UNORM        = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_1RGB, 1, 1, 1, 1, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_B8G8R8A8_UNORM        = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_BGRA, 1, 1, 1, 1, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_B8G8R8X8_UNORM        = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_BGR1, 1, 1, 1, 1, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_A1R5G5B5_UNORM        = _PIPE_FORMAT_RGBAZS_1 ( _PIPE_FORMAT_ARGB, 1, 5, 5, 5, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_A4R4G4B4_UNORM        = _PIPE_FORMAT_RGBAZS_1 ( _PIPE_FORMAT_ARGB, 4, 4, 4, 4, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_R5G6B5_UNORM          = _PIPE_FORMAT_RGBAZS_1 ( _PIPE_FORMAT_RGB1, 5, 6, 5, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_A2B10G10R10_UNORM     = _PIPE_FORMAT_RGBAZS_2 ( _PIPE_FORMAT_ABGR, 1, 5, 5, 5, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_L8_UNORM              = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RRR1, 1, 1, 1, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_A8_UNORM              = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_000R, 0, 0, 0, 1, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_I8_UNORM              = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RRRR, 1, 1, 1, 1, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_A8L8_UNORM            = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RRRG, 1, 1, 1, 1, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_L16_UNORM             = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RRR1, 2, 2, 2, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_YCBCR                 = _PIPE_FORMAT_YCBCR( 0 )
-PIPE_FORMAT_YCBCR_REV             = _PIPE_FORMAT_YCBCR( 1 )
-PIPE_FORMAT_Z16_UNORM             = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_Z000, 2, 0, 0, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_Z32_UNORM             = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_Z000, 4, 0, 0, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_Z32_FLOAT             = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_Z000, 4, 0, 0, 0, PIPE_FORMAT_TYPE_FLOAT )
-PIPE_FORMAT_S8Z24_UNORM           = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_SZ00, 1, 3, 0, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_Z24S8_UNORM           = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_ZS00, 3, 1, 0, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_X8Z24_UNORM           = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_0Z00, 1, 3, 0, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_Z24X8_UNORM           = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_Z000, 3, 1, 0, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_S8_UNORM              = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_S000, 1, 0, 0, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_R64_FLOAT             = _PIPE_FORMAT_RGBAZS_64( _PIPE_FORMAT_R001, 1, 0, 0, 0, PIPE_FORMAT_TYPE_FLOAT )
-PIPE_FORMAT_R64G64_FLOAT          = _PIPE_FORMAT_RGBAZS_64( _PIPE_FORMAT_RG01, 1, 1, 0, 0, PIPE_FORMAT_TYPE_FLOAT )
-PIPE_FORMAT_R64G64B64_FLOAT       = _PIPE_FORMAT_RGBAZS_64( _PIPE_FORMAT_RGB1, 1, 1, 1, 0, PIPE_FORMAT_TYPE_FLOAT )
-PIPE_FORMAT_R64G64B64A64_FLOAT    = _PIPE_FORMAT_RGBAZS_64( _PIPE_FORMAT_RGBA, 1, 1, 1, 1, PIPE_FORMAT_TYPE_FLOAT )
-PIPE_FORMAT_R32_FLOAT             = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_R001, 4, 0, 0, 0, PIPE_FORMAT_TYPE_FLOAT )
-PIPE_FORMAT_R32G32_FLOAT          = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RG01, 4, 4, 0, 0, PIPE_FORMAT_TYPE_FLOAT )
-PIPE_FORMAT_R32G32B32_FLOAT       = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 4, 4, 4, 0, PIPE_FORMAT_TYPE_FLOAT )
-PIPE_FORMAT_R32G32B32A32_FLOAT    = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGBA, 4, 4, 4, 4, PIPE_FORMAT_TYPE_FLOAT )
-PIPE_FORMAT_R32_UNORM             = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_R001, 4, 0, 0, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_R32G32_UNORM          = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RG01, 4, 4, 0, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_R32G32B32_UNORM       = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 4, 4, 4, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_R32G32B32A32_UNORM    = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGBA, 4, 4, 4, 4, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_R32_USCALED           = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_R001, 4, 0, 0, 0, PIPE_FORMAT_TYPE_USCALED )
-PIPE_FORMAT_R32G32_USCALED        = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RG01, 4, 4, 0, 0, PIPE_FORMAT_TYPE_USCALED )
-PIPE_FORMAT_R32G32B32_USCALED     = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 4, 4, 4, 0, PIPE_FORMAT_TYPE_USCALED )
-PIPE_FORMAT_R32G32B32A32_USCALED  = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGBA, 4, 4, 4, 4, PIPE_FORMAT_TYPE_USCALED )
-PIPE_FORMAT_R32_SNORM             = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_R001, 4, 0, 0, 0, PIPE_FORMAT_TYPE_SNORM )
-PIPE_FORMAT_R32G32_SNORM          = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RG01, 4, 4, 0, 0, PIPE_FORMAT_TYPE_SNORM )
-PIPE_FORMAT_R32G32B32_SNORM       = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 4, 4, 4, 0, PIPE_FORMAT_TYPE_SNORM )
-PIPE_FORMAT_R32G32B32A32_SNORM    = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGBA, 4, 4, 4, 4, PIPE_FORMAT_TYPE_SNORM )
-PIPE_FORMAT_R32_SSCALED           = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_R001, 4, 0, 0, 0, PIPE_FORMAT_TYPE_SSCALED )
-PIPE_FORMAT_R32G32_SSCALED        = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RG01, 4, 4, 0, 0, PIPE_FORMAT_TYPE_SSCALED )
-PIPE_FORMAT_R32G32B32_SSCALED     = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 4, 4, 4, 0, PIPE_FORMAT_TYPE_SSCALED )
-PIPE_FORMAT_R32G32B32A32_SSCALED  = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGBA, 4, 4, 4, 4, PIPE_FORMAT_TYPE_SSCALED )
-PIPE_FORMAT_R16_UNORM             = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_R001, 2, 0, 0, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_R16G16_UNORM          = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RG01, 2, 2, 0, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_R16G16B16_UNORM       = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 2, 2, 2, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_R16G16B16A16_UNORM    = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGBA, 2, 2, 2, 2, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_R16_USCALED           = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_R001, 2, 0, 0, 0, PIPE_FORMAT_TYPE_USCALED )
-PIPE_FORMAT_R16G16_USCALED        = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RG01, 2, 2, 0, 0, PIPE_FORMAT_TYPE_USCALED )
-PIPE_FORMAT_R16G16B16_USCALED     = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 2, 2, 2, 0, PIPE_FORMAT_TYPE_USCALED )
-PIPE_FORMAT_R16G16B16A16_USCALED  = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGBA, 2, 2, 2, 2, PIPE_FORMAT_TYPE_USCALED )
-PIPE_FORMAT_R16_SNORM             = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_R001, 2, 0, 0, 0, PIPE_FORMAT_TYPE_SNORM )
-PIPE_FORMAT_R16G16_SNORM          = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RG01, 2, 2, 0, 0, PIPE_FORMAT_TYPE_SNORM )
-PIPE_FORMAT_R16G16B16_SNORM       = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 2, 2, 2, 0, PIPE_FORMAT_TYPE_SNORM )
-PIPE_FORMAT_R16G16B16A16_SNORM    = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGBA, 2, 2, 2, 2, PIPE_FORMAT_TYPE_SNORM )
-PIPE_FORMAT_R16_SSCALED           = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_R001, 2, 0, 0, 0, PIPE_FORMAT_TYPE_SSCALED )
-PIPE_FORMAT_R16G16_SSCALED        = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RG01, 2, 2, 0, 0, PIPE_FORMAT_TYPE_SSCALED )
-PIPE_FORMAT_R16G16B16_SSCALED     = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 2, 2, 2, 0, PIPE_FORMAT_TYPE_SSCALED )
-PIPE_FORMAT_R16G16B16A16_SSCALED  = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGBA, 2, 2, 2, 2, PIPE_FORMAT_TYPE_SSCALED )
-PIPE_FORMAT_R8_UNORM              = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_R001, 1, 0, 0, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_R8G8_UNORM            = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RG01, 1, 1, 0, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_R8G8B8_UNORM          = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 1, 1, 1, 0, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_R8G8B8A8_UNORM        = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGBA, 1, 1, 1, 1, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_R8G8B8X8_UNORM        = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 1, 1, 1, 1, PIPE_FORMAT_TYPE_UNORM )
-PIPE_FORMAT_R8_USCALED            = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_R001, 1, 0, 0, 0, PIPE_FORMAT_TYPE_USCALED )
-PIPE_FORMAT_R8G8_USCALED          = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RG01, 1, 1, 0, 0, PIPE_FORMAT_TYPE_USCALED )
-PIPE_FORMAT_R8G8B8_USCALED        = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 1, 1, 1, 0, PIPE_FORMAT_TYPE_USCALED )
-PIPE_FORMAT_R8G8B8A8_USCALED      = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGBA, 1, 1, 1, 1, PIPE_FORMAT_TYPE_USCALED )
-PIPE_FORMAT_R8G8B8X8_USCALED      = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 1, 1, 1, 1, PIPE_FORMAT_TYPE_USCALED )
-PIPE_FORMAT_R8_SNORM              = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_R001, 1, 0, 0, 0, PIPE_FORMAT_TYPE_SNORM )
-PIPE_FORMAT_R8G8_SNORM            = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RG01, 1, 1, 0, 0, PIPE_FORMAT_TYPE_SNORM )
-PIPE_FORMAT_R8G8B8_SNORM          = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 1, 1, 1, 0, PIPE_FORMAT_TYPE_SNORM )
-PIPE_FORMAT_R8G8B8A8_SNORM        = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGBA, 1, 1, 1, 1, PIPE_FORMAT_TYPE_SNORM )
-PIPE_FORMAT_R8G8B8X8_SNORM        = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 1, 1, 1, 1, PIPE_FORMAT_TYPE_SNORM )
-PIPE_FORMAT_B6G5R5_SNORM          = _PIPE_FORMAT_RGBAZS_1 ( _PIPE_FORMAT_BGR1, 6, 5, 5, 0, PIPE_FORMAT_TYPE_SNORM )
-PIPE_FORMAT_A8B8G8R8_SNORM        = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_BGRA, 1, 1, 1, 1, PIPE_FORMAT_TYPE_SNORM )
-PIPE_FORMAT_X8B8G8R8_SNORM        = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 1, 1, 1, 1, PIPE_FORMAT_TYPE_SNORM )
-PIPE_FORMAT_R8_SSCALED            = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_R001, 1, 0, 0, 0, PIPE_FORMAT_TYPE_SSCALED )
-PIPE_FORMAT_R8G8_SSCALED          = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RG01, 1, 1, 0, 0, PIPE_FORMAT_TYPE_SSCALED )
-PIPE_FORMAT_R8G8B8_SSCALED        = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 1, 1, 1, 0, PIPE_FORMAT_TYPE_SSCALED )
-PIPE_FORMAT_R8G8B8A8_SSCALED      = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGBA, 1, 1, 1, 1, PIPE_FORMAT_TYPE_SSCALED )
-PIPE_FORMAT_R8G8B8X8_SSCALED      = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 1, 1, 1, 1, PIPE_FORMAT_TYPE_SSCALED )
-PIPE_FORMAT_R32_FIXED             = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_R001, 4, 0, 0, 0, PIPE_FORMAT_TYPE_FIXED )
-PIPE_FORMAT_R32G32_FIXED          = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RG01, 4, 4, 0, 0, PIPE_FORMAT_TYPE_FIXED )
-PIPE_FORMAT_R32G32B32_FIXED       = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 4, 4, 4, 0, PIPE_FORMAT_TYPE_FIXED )
-PIPE_FORMAT_R32G32B32A32_FIXED    = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGBA, 4, 4, 4, 4, PIPE_FORMAT_TYPE_FIXED )
-PIPE_FORMAT_L8_SRGB               = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RRR1, 1, 1, 1, 0, PIPE_FORMAT_TYPE_SRGB )
-PIPE_FORMAT_A8_L8_SRGB            = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RRRG, 1, 1, 1, 1, PIPE_FORMAT_TYPE_SRGB )
-PIPE_FORMAT_R8G8B8_SRGB           = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 1, 1, 1, 0, PIPE_FORMAT_TYPE_SRGB )
-PIPE_FORMAT_R8G8B8A8_SRGB         = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGBA, 1, 1, 1, 1, PIPE_FORMAT_TYPE_SRGB )
-PIPE_FORMAT_R8G8B8X8_SRGB         = _PIPE_FORMAT_RGBAZS_8 ( _PIPE_FORMAT_RGB1, 1, 1, 1, 1, PIPE_FORMAT_TYPE_SRGB )
-PIPE_FORMAT_X8UB8UG8SR8S_NORM     = _PIPE_FORMAT_MIXED( _PIPE_FORMAT_1BGR, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1 )
-PIPE_FORMAT_B6UG5SR5S_NORM        = _PIPE_FORMAT_MIXED( _PIPE_FORMAT_BGR1, 6, 5, 5, 0, 0, 1, 1, 0, 1, 0 )
-PIPE_FORMAT_DXT1_RGB              = _PIPE_FORMAT_DXT( 1, 8, 8, 8, 0 )
-PIPE_FORMAT_DXT1_RGBA             = _PIPE_FORMAT_DXT( 1, 8, 8, 8, 8 )
-PIPE_FORMAT_DXT3_RGBA             = _PIPE_FORMAT_DXT( 3, 8, 8, 8, 8 )
-PIPE_FORMAT_DXT5_RGBA             = _PIPE_FORMAT_DXT( 5, 8, 8, 8, 8 )
-
-
-formats = {}
-for name, value in globals().items():
-    if name.startswith("PIPE_FORMAT_") and isinstance(value, int):
-        formats[value] = name
-
-
-def clip(g):
-	return min(max(g, 0), 255)
-
-
-def yuv2rgb(y, u, v):
-	C = y - 16
-	D = u - 128
-	E = v - 128
-
-	r = clip(( 298 * C           + 409 * E + 128) >> 8)
-	g = clip(( 298 * C - 100 * D - 208 * E + 128) >> 8)
-	b = clip(( 298 * C + 516 * D           + 128) >> 8)
-	
-	return r, g, b
-
-	
-def translate_r5g6b5(data):
-	value, = struct.unpack_from("H", data)
-	r = ((value >> 11) & 0x1f)*0xff/0x1f
-	g = ((value >>  5) & 0x3f)*0xff/0x3f
-	b = ((value >>  0) & 0x1f)*0xff/0x1f
-	a = 255
-	return [[(r, g, b, a)]]
-
-def translate_a8r8g8b8(data):
-    b, g, r, a = struct.unpack_from("BBBB", data)
-    return [[(r, g, b, a)]]
-
-
-def translate_x8r8g8b8(data):
-    b, g, r, x = struct.unpack_from("BBBB", data)
-    a = 255
-    return [[(r, g, b, a)]]
-
-def translate_r8g8b8a8(data):
-	r, g, b, a = struct.unpack_from("BBBB", data)
-	return [[(r, g, b, a)]]
-
-def translate_ycbcr(data):
-	y1, u, y2, v = struct.unpack_from("BBBB", data)
-	r1, g1, b1 = yuv2rgb(y1, u, v)
-	r2, g2, b2 = yuv2rgb(y1, u, v)
-	return [[(r1, g1, b1, 255), (r2, g2, b2, 255)]]
-
-def translate_ycbcr_rev(data):
-    v, y2, u, y1 = struct.unpack_from("BBBB", data)
-    r1, g1, b1 = yuv2rgb(y1, u, v)
-    r2, g2, b2 = yuv2rgb(y1, u, v)
-    return [[(r1, g1, b1, 255), (r2, g2, b2, 255)]]
-
-def translate_x8z24(data):
-    value, = struct.unpack_from("I", data)
-    r = g = b = (value & 0xffffff)*0xff/0xffffff
-    a = 255
-    return [[(r, g, b, a)]]
-
-def translate_s8z24(data):
-    value, = struct.unpack_from("I", data)
-    r = (value & 0xffffff)*0xff/0xffffff
-    g = value >> 24
-    b = 0
-    a = 255
-    return [[(r, g, b, a)]]
-
-
-translate = {
-	PIPE_FORMAT_A8R8G8B8_UNORM: (4, 1, 1, translate_a8r8g8b8),
-	PIPE_FORMAT_X8R8G8B8_UNORM: (4, 1, 1, translate_x8r8g8b8),
-	PIPE_FORMAT_B8G8R8A8_UNORM: (4, 1, 1, translate_r8g8b8a8),
-	PIPE_FORMAT_B8G8R8X8_UNORM: (4, 1, 1, translate_r8g8b8a8),
-	PIPE_FORMAT_A8B8G8R8_SNORM: (4, 1, 1, translate_r8g8b8a8),
-	PIPE_FORMAT_R5G6B5_UNORM: (2, 1, 1, translate_r5g6b5),
-	PIPE_FORMAT_YCBCR: (4, 2, 1, translate_ycbcr),
-	PIPE_FORMAT_YCBCR_REV: (4, 2, 1, translate_ycbcr_rev),
-    PIPE_FORMAT_S8Z24_UNORM: (4, 1, 1, translate_s8z24),
-    PIPE_FORMAT_X8Z24_UNORM: (4, 1, 1, translate_x8z24),
-}
-
-def read_header(infile):
-	header_fmt = "IIII"
-	header = infile.read(struct.calcsize(header_fmt))
-	return struct.unpack_from(header_fmt, header)
-
-def process(infilename, outfilename):
-	sys.stderr.write("%s -> %s\n" % (infilename, outfilename))
-	infile = open(infilename, "rb")
-	format, cpp, width, height = read_header(infile)
-	sys.stderr.write("  %ux%ux%ubpp %s\n" % (width, height, cpp*8, formats[format]))
-	outimage = Image.new(
-	mode='RGB',
-	size=(width, height),
-	color=(0,0,0))
-	outpixels = outimage.load()
-	try:
-		bsize, bwidth, bheight, translate_func = translate[format]
-	except KeyError:
-		sys.stderr.write('error: unsupported format %s\n' % formats[format])
-		return
-	for y in range(0, height, bheight):
-		for x in range(0, width, bwidth):
-			indata = infile.read(bsize)
-			outdata = translate_func(indata)
-			for j in range(bheight):
-				for i in range(bwidth):
-					r, g, b, a = outdata[j][i]
-					outpixels[x+i, y+j] = r, g, b
-	outimage.save(outfilename, "PNG")
-
-
-def main():
-	if sys.platform == 'win32':
-		# wildcard expansion
-		from glob import glob
-		args = []
-		for arg in sys.argv[1:]:
-			args.extend(glob(arg))
-	else:
-		args = sys.argv[1:]
-	for infilename in args:
-		root, ext = os.path.splitext(infilename)
-		outfilename = root + ".png"
-		process(infilename, outfilename)
-
-
-if __name__ == '__main__':
-	main()
--- a/bin/version.mk
+++ b/bin/version.mk
@@ -1,17 +0,0 @@
-#!/usr/bin/make -sf
-# Print the various Mesa version fields. This is mostly used to add the
-# version to configure.
-
-# This reflects that this script is usually called from the toplevel
-TOP = .
-
-include $(TOP)/configs/default
-
-version:
-	@echo $(MESA_VERSION)
-major:
-	@echo $(MESA_MAJOR)
-minor:
-	@echo $(MESA_MINOR)
-tiny:
-	@echo $(MESA_TINY)
--- a/bin/win32kprof.py
+++ b/bin/win32kprof.py
@@ -1,309 +0,0 @@
-#!/usr/bin/env python
-##########################################################################
-# 
-# Copyright 2008 Tungsten Graphics, Inc., Cedar Park, Texas.
-# All Rights Reserved.
-# 
-# Permission is hereby granted, free of charge, to any person obtaining a
-# copy of this software and associated documentation files (the
-# "Software"), to deal in the Software without restriction, including
-# without limitation the rights to use, copy, modify, merge, publish,
-# distribute, sub license, and/or sell copies of the Software, and to
-# permit persons to whom the Software is furnished to do so, subject to
-# the following conditions:
-# 
-# The above copyright notice and this permission notice (including the
-# next paragraph) shall be included in all copies or substantial portions
-# of the Software.
-# 
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
-# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
-# IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
-# ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
-# TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
-# SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-# 
-##########################################################################
-
-
-import sys
-import optparse
-import re
-import struct
-
-from gprof2dot import Call, Function, Profile
-from gprof2dot import CALLS, SAMPLES, TIME, TIME_RATIO, TOTAL_TIME, TOTAL_TIME_RATIO
-from gprof2dot import DotWriter, TEMPERATURE_COLORMAP
-
-
-__version__ = '0.1'
-
-
-class ParseError(Exception):
-    pass
-
-
-class MsvcDemangler:
-    # http://www.kegel.com/mangle.html
-
-    def __init__(self, symbol):
-        self._symbol = symbol
-        self._pos = 0
-
-    def lookahead(self):
-        return self._symbol[self._pos]
-
-    def consume(self):
-        ret = self.lookahead()
-        self._pos += 1
-        return ret
-    
-    def match(self, c):
-        if self.lookahead() != c:
-            raise ParseError
-        self.consume()
-
-    def parse(self):
-        self.match('?')
-        name = self.parse_name()
-        qualifications = self.parse_qualifications()
-        return '::'.join(qualifications + [name])
-
-    def parse_name(self):
-        if self.lookahead() == '?':
-            return self.consume() + self.consume()
-        else:
-            name = self.parse_id()
-            self.match('@')
-            return name
-
-    def parse_qualifications(self):
-        qualifications = []
-        while self.lookahead() != '@':
-            name = self.parse_id()
-            qualifications.append(name)
-            self.match('@')
-        return qualifications
-
-    def parse_id(self):
-        s = ''
-        while True:
-            c = self.lookahead()
-            if c.isalnum() or c in '_':
-                s += c
-                self.consume()
-            else:
-                break
-        return s
-
-
-def demangle(name):
-    if name.startswith('_'):
-        name = name[1:]
-        idx = name.rfind('@')
-        if idx != -1 and name[idx+1:].isdigit():
-            name = name[:idx]
-        return name
-    if name.startswith('?'):
-        demangler = MsvcDemangler(name)
-        return demangler.parse()
-    return name
-
-
-class Reader:
-
-    def __init__(self):
-        self.symbols = []
-        self.symbol_cache = {}
-        self.base_addr = None
-    
-    def read_map(self, mapfile):
-        # See http://msdn.microsoft.com/en-us/library/k7xkk3e2.aspx
-        last_addr = 0
-        last_name = 0
-        for line in file(mapfile, "rt"):
-            fields = line.split()
-            try:
-                section_offset, name, addr, type, lib_object = fields
-            except ValueError:
-                continue
-            if type != 'f':
-                continue
-            section, offset = section_offset.split(':')
-            addr = int(offset, 16)
-            self.symbols.append((addr, name))
-            last_addr = addr
-            last_name = name
-
-        # sort symbols
-        self.symbols.sort(key = lambda (addr, name): addr)
-
-    def lookup_addr(self, addr):
-        try:
-            return self.symbol_cache[addr]
-        except KeyError:
-            pass
-
-        tolerance = 4196
-        s, e = 0, len(self.symbols)
-        while s != e:
-            i = (s + e)//2
-            start_addr, name = self.symbols[i]
-            try:
-                end_addr, next_name = self.symbols[i + 1]
-            except IndexError:
-                end_addr = start_addr + tolerance
-            if addr < start_addr:
-                e = i
-                continue
-            if addr == end_addr:
-                return next_name, addr - start_addr
-            if addr > end_addr:
-                s = i
-                continue
-            return name, addr - start_addr
-        raise ValueError
-
-    def lookup_symbol(self, name):
-        for symbol_addr, symbol_name in self.symbols:
-            if name == symbol_name:
-                return symbol_addr
-        return 0
-
-    def read_data(self, data):
-        profile = Profile()
-
-        fp = file(data, "rb")
-        entry_format = "IIII"
-        entry_size = struct.calcsize(entry_format)
-        caller = None
-        caller_stack = []
-        while True:
-            entry = fp.read(entry_size)
-            if len(entry) < entry_size:
-                break
-            caller_addr, callee_addr, samples_lo, samples_hi = struct.unpack(entry_format, entry)
-            if caller_addr == 0 and callee_addr == 0:
-                continue
-
-            if self.base_addr is None:
-                ref_addr = self.lookup_symbol('___debug_profile_reference@0')
-                if ref_addr:
-                    self.base_addr = (caller_addr - ref_addr) & ~(options.align - 1)
-                else:
-                    self.base_addr = 0
-                sys.stderr.write('Base addr: %08x\n' % self.base_addr)
-
-            samples = (samples_hi << 32) | samples_lo
-            
-            try:
-                caller_raddr = caller_addr - self.base_addr
-                caller_sym, caller_ofs = self.lookup_addr(caller_raddr)
-
-                try:
-                    caller = profile.functions[caller_sym]
-                except KeyError:
-                    caller_name = demangle(caller_sym)
-                    caller = Function(caller_sym, caller_name)
-                    profile.add_function(caller)
-                    caller[CALLS] = 0
-                    caller[SAMPLES] = 0
-            except ValueError:
-                caller = None
-
-            if not callee_addr:
-                if caller:
-                    caller[SAMPLES] += samples
-            else:
-                callee_raddr = callee_addr - self.base_addr
-                callee_sym, callee_ofs = self.lookup_addr(callee_raddr)
-
-                try:
-                    callee = profile.functions[callee_sym]
-                except KeyError:
-                    callee_name = demangle(callee_sym)
-                    callee = Function(callee_sym, callee_name)
-                    profile.add_function(callee)
-                    callee[CALLS] = samples
-                    callee[SAMPLES] = 0
-                else:
-                    callee[CALLS] += samples
-
-                if caller is not None:
-                    try:
-                        call = caller.calls[callee.id]
-                    except KeyError:
-                        call = Call(callee.id)
-                        call[CALLS] = samples
-                        caller.add_call(call)
-                    else:
-                        call[CALLS] += samples
-            
-            if options.verbose:
-                if not callee_addr:
-                    sys.stderr.write('%s+%u: %u\n' % (caller_sym, caller_ofs, samples))
-                else:
-                    sys.stderr.write('%s+%u -> %s+%u: %u\n' % (caller_sym, caller_ofs, callee_sym, callee_ofs, samples))
-
-        # compute derived data
-        profile.validate()
-        profile.find_cycles()
-        profile.aggregate(SAMPLES)
-        profile.ratio(TIME_RATIO, SAMPLES)
-        profile.call_ratios(CALLS)
-        profile.integrate(TOTAL_TIME_RATIO, TIME_RATIO)
-
-        return profile
-
-
-def main():
-    parser = optparse.OptionParser(
-        usage="\n\t%prog [options] [file] ...",
-        version="%%prog %s" % __version__)
-    parser.add_option(
-        '-a', '--align', metavar='NUMBER',
-        type="int", dest="align", default=16,
-        help="section alignment")
-    parser.add_option(
-        '-m', '--map', metavar='FILE',
-        type="string", dest="map",
-        help="map file")
-    parser.add_option(
-        '-b', '--base', metavar='FILE',
-        type="string", dest="base",
-        help="base addr")
-    parser.add_option(
-        '-n', '--node-thres', metavar='PERCENTAGE',
-        type="float", dest="node_thres", default=0.5,
-        help="eliminate nodes below this threshold [default: %default]")
-    parser.add_option(
-        '-e', '--edge-thres', metavar='PERCENTAGE',
-        type="float", dest="edge_thres", default=0.1,
-        help="eliminate edges below this threshold [default: %default]")
-    parser.add_option(
-        '-v', '--verbose',
-        action="count",
-        dest="verbose", default=0,
-        help="verbose output")
-
-    global options
-    (options, args) = parser.parse_args(sys.argv[1:])
-
-    reader = Reader()
-    if options.base is not None:
-        reader.base_addr = int(options.base, 16)
-    if options.map is not None:
-        reader.read_map(options.map)
-    for arg in args:
-        profile = reader.read_data(arg)
-        profile.prune(options.node_thres/100.0, options.edge_thres/100.0)
-        output = sys.stdout
-        dot = DotWriter(output)
-        colormap = TEMPERATURE_COLORMAP
-        dot.graph(profile, colormap)
-
-
-if __name__ == '__main__':
-    main()
-
--- a/common.py
+++ b/common.py
@@ -1,67 +0,0 @@
-#######################################################################
-# Common SCons code
-
-import os
-import os.path
-import sys
-import platform as _platform
-
-
-#######################################################################
-# Defaults
-
-_platform_map = {
-	'linux2': 'linux',
-	'win32': 'winddk',
-}
-
-default_platform = sys.platform
-default_platform = _platform_map.get(default_platform, default_platform)
-
-_machine_map = {
-	'x86': 'x86',
-	'i386': 'x86',
-	'i486': 'x86',
-	'i586': 'x86',
-	'i686': 'x86',
-	'ppc' : 'ppc',
-	'x86_64': 'x86_64',
-}
-if 'PROCESSOR_ARCHITECTURE' in os.environ:
-	default_machine = os.environ['PROCESSOR_ARCHITECTURE']
-else:
-	default_machine = _platform.machine()
-default_machine = _machine_map.get(default_machine, 'generic')
-
-if default_platform in ('linux', 'freebsd', 'darwin'):
-	default_dri = 'yes'
-elif default_platform in ('winddk', 'windows', 'wince'):
-	default_dri = 'no'
-else:
-	default_dri = 'no'
-
-
-#######################################################################
-# Common options
-
-def AddOptions(opts):
-	try:
-		from SCons.Variables.BoolVariable import BoolVariable as BoolOption
-	except ImportError:
-		from SCons.Options.BoolOption import BoolOption
-	try:
-		from SCons.Variables.EnumVariable import EnumVariable as EnumOption
-	except ImportError:
-		from SCons.Options.EnumOption import EnumOption
-	opts.Add(BoolOption('debug', 'debug build', 'no'))
-	opts.Add(BoolOption('profile', 'profile build', 'no'))
-	opts.Add(BoolOption('quiet', 'quiet command lines', 'yes'))
-	opts.Add(EnumOption('machine', 'use machine-specific assembly code', default_machine,
-											 allowed_values=('generic', 'ppc', 'x86', 'x86_64')))
-	opts.Add(EnumOption('platform', 'target platform', default_platform,
-											 allowed_values=('linux', 'cell', 'windows', 'winddk', 'wince')))
-	opts.Add(EnumOption('toolchain', 'compiler toolchain', 'default',
-											 allowed_values=('default', 'crossmingw', 'winsdk', 'winddk')))
-	opts.Add(BoolOption('llvm', 'use LLVM', 'no'))
-	opts.Add(BoolOption('dri', 'build DRI drivers', default_dri))
-
--- a/configs/.gitignore
+++ b/configs/.gitignore
@@ -1,2 +0,0 @@
-current
-autoconf
--- a/configs/aix
+++ b/configs/aix
@@ -13,6 +13,7 @@ CXXFLAGS = -O -DAIXV3 -DPTHREADS

 # Misc tools and flags
 MKLIB_OPTIONS =
+COPY_LIBS = cp -f -h

 # Library names (actual file names)
 GL_LIB_NAME = libGL.a
--- a/configs/aix-gcc
+++ b/configs/aix-gcc
@@ -11,10 +11,6 @@ CXX = g++
 CFLAGS = -O2 -DAIXV3
 CXXFLAGS = -O2 -DAIXV3

-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 MKLIB_OPTIONS = -arch aix-gcc
 GL_LIB_DEPS = -lX11 -lXext -lm
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lm
--- a/configs/autoconf.in
+++ b/configs/autoconf.in
@@ -1,145 +0,0 @@
-# Autoconf configuration
-
-# Pull in the defaults
-include $(TOP)/configs/default
-
-# This is generated by configure
-CONFIG_NAME = autoconf
-
-# Compiler and flags
-CC = @CC@
-CXX = @CXX@
-OPT_FLAGS = @OPT_FLAGS@
-ARCH_FLAGS = @ARCH_FLAGS@
-ASM_FLAGS = @ASM_FLAGS@
-PIC_FLAGS = @PIC_FLAGS@
-DEFINES = @DEFINES@
-CFLAGS = @CPPFLAGS@ @CFLAGS@ \
-	$(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(ASM_FLAGS) $(DEFINES)
-CXXFLAGS = @CPPFLAGS@ @CXXFLAGS@ \
-	$(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
-LDFLAGS = @LDFLAGS@
-EXTRA_LIB_PATH = @EXTRA_LIB_PATH@
-
-# Assembler
-MESA_ASM_SOURCES = @MESA_ASM_SOURCES@
-GLAPI_ASM_SOURCES = @GLAPI_ASM_SOURCES@
-
-# Misc tools and flags
-MAKE = @MAKE@
-SHELL = @SHELL@
-MKLIB_OPTIONS = @MKLIB_OPTIONS@
-MKDEP = @MKDEP@
-MKDEP_OPTIONS = @MKDEP_OPTIONS@
-
-# Python and flags (generally only needed by the developers)
-PYTHON2 = python
-PYTHON_FLAGS = -t -O -O
-
-# Library names (base name)
-GL_LIB = GL
-GLU_LIB = GLU
-GLUT_LIB = glut
-GLW_LIB = GLw
-OSMESA_LIB = @OSMESA_LIB@
-
-# Library names (actual file names)
-GL_LIB_NAME = @GL_LIB_NAME@
-GLU_LIB_NAME = @GLU_LIB_NAME@
-GLUT_LIB_NAME = @GLUT_LIB_NAME@
-GLW_LIB_NAME = @GLW_LIB_NAME@
-OSMESA_LIB_NAME = @OSMESA_LIB_NAME@
-
-# Globs used to install the lib and all symlinks
-GL_LIB_GLOB = @GL_LIB_GLOB@
-GLU_LIB_GLOB = @GLU_LIB_GLOB@
-GLUT_LIB_GLOB = @GLUT_LIB_GLOB@
-GLW_LIB_GLOB = @GLW_LIB_GLOB@
-OSMESA_LIB_GLOB = @OSMESA_LIB_GLOB@
-
-# Directories to build
-LIB_DIR = @LIB_DIR@
-SRC_DIRS = @SRC_DIRS@
-GLU_DIRS = @GLU_DIRS@
-DRIVER_DIRS = @DRIVER_DIRS@
-GALLIUM_DIRS = @GALLIUM_DIRS@
-GALLIUM_AUXILIARY_DIRS = @GALLIUM_AUXILIARY_DIRS@
-GALLIUM_DRIVERS_DIRS = @GALLIUM_DRIVERS_DIRS@
-GALLIUM_WINSYS_DIRS = @GALLIUM_WINSYS_DIRS@
-GALLIUM_WINSYS_DRM_DIRS = @GALLIUM_WINSYS_DRM_DIRS@
-GALLIUM_STATE_TRACKERS_DIRS = @GALLIUM_STATE_TRACKERS_DIRS@
-GALLIUM_AUXILIARIES = $(foreach DIR,$(GALLIUM_AUXILIARY_DIRS),$(TOP)/src/gallium/auxiliary/$(DIR)/lib$(DIR).a)
-GALLIUM_DRIVERS = $(foreach DIR,$(GALLIUM_DRIVERS_DIRS),$(TOP)/src/gallium/drivers/$(DIR)/lib$(DIR).a)
-
-# Which subdirs under $(TOP)/progs/ to enter:
-PROGRAM_DIRS = @PROGRAM_DIRS@
-
-# Driver specific build vars
-DRI_DIRS = @DRI_DIRS@ 
-WINDOW_SYSTEM = @WINDOW_SYSTEM@
-USING_EGL = @USING_EGL@
-
-# Dependencies
-X11_INCLUDES = @X11_INCLUDES@
-
-# GLw motif setup
-GLW_SOURCES = @GLW_SOURCES@
-MOTIF_CFLAGS = @MOTIF_CFLAGS@
-
-# Library/program dependencies
-GL_LIB_DEPS = $(EXTRA_LIB_PATH) @GL_LIB_DEPS@
-OSMESA_LIB_DEPS = -L$(TOP)/$(LIB_DIR) @OSMESA_MESA_DEPS@ \
-	$(EXTRA_LIB_PATH) @OSMESA_LIB_DEPS@
-EGL_LIB_DEPS = $(EXTRA_LIB_PATH) @EGL_LIB_DEPS@
-GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) @GLU_MESA_DEPS@ \
-	$(EXTRA_LIB_PATH) @GLU_LIB_DEPS@
-GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) @GLUT_MESA_DEPS@ \
-	$(EXTRA_LIB_PATH) @GLUT_LIB_DEPS@
-GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) @GLW_MESA_DEPS@ \
-	$(EXTRA_LIB_PATH) @GLW_LIB_DEPS@
-APP_LIB_DEPS = $(EXTRA_LIB_PATH) @APP_LIB_DEPS@
-
-# DRI dependencies
-DRI_LIB_DEPS = $(EXTRA_LIB_PATH) @DRI_LIB_DEPS@
-LIBDRM_CFLAGS = @LIBDRM_CFLAGS@
-LIBDRM_LIB = @LIBDRM_LIBS@
-DRI2PROTO_CFLAGS = @DRI2PROTO_CFLAGS@
-EXPAT_INCLUDES = @EXPAT_INCLUDES@
-
-# Autoconf directories
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-libdir = @libdir@
-includedir = @includedir@
-
-# Installation directories (for make install)
-INSTALL_DIR = $(prefix)
-INSTALL_LIB_DIR = $(libdir)
-INSTALL_INC_DIR = $(includedir)
-
-# DRI installation directories
-DRI_DRIVER_INSTALL_DIR = @DRI_DRIVER_INSTALL_DIR@
-
-# Where libGL will look for DRI hardware drivers
-DRI_DRIVER_SEARCH_DIR = $(DRI_DRIVER_INSTALL_DIR)
-
-# Xorg driver install directory (for xorg state-tracker)
-XORG_DRIVER_INSTALL_DIR = @XORG_DRIVER_INSTALL_DIR@
-
-# pkg-config substitutions
-GL_PC_REQ_PRIV = @GL_PC_REQ_PRIV@
-GL_PC_LIB_PRIV = @GL_PC_LIB_PRIV@
-GL_PC_CFLAGS = @GL_PC_CFLAGS@
-DRI_PC_REQ_PRIV = @DRI_PC_REQ_PRIV@
-GLU_PC_REQ = @GLU_PC_REQ@
-GLU_PC_REQ_PRIV = @GLU_PC_REQ_PRIV@
-GLU_PC_LIB_PRIV = @GLU_PC_LIB_PRIV@
-GLU_PC_CFLAGS = @GLU_PC_CFLAGS@
-GLUT_PC_REQ_PRIV = @GLUT_PC_REQ_PRIV@
-GLUT_PC_LIB_PRIV = @GLUT_PC_LIB_PRIV@
-GLUT_PC_CFLAGS = @GLUT_PC_CFLAGS@
-GLW_PC_REQ_PRIV = @GLW_PC_REQ_PRIV@
-GLW_PC_LIB_PRIV = @GLW_PC_LIB_PRIV@
-GLW_PC_CFLAGS = @GLW_PC_CFLAGS@
-OSMESA_PC_REQ = @OSMESA_PC_REQ@
-OSMESA_PC_LIB_PRIV = @OSMESA_PC_LIB_PRIV@
--- a/configs/beos
+++ b/configs/beos
@@ -26,8 +26,8 @@ ifeq ($(CPU), x86)
 		-DUSE_3DNOW_ASM \
 		-DUSE_SSE_ASM
 	
-	MESA_ASM_SOURCES = $(X86_SOURCES)
-	GLAPI_ASM_SOURCES = $(X86_API)
+	ASM_SOURCES = $(X86_SOURCES)
+	ASM_API = $(X86_API)

 	CC = gcc
 	CXX = g++
@@ -39,10 +39,6 @@ ifeq ($(CPU), x86)

 	CXXFLAGS = $(CFLAGS)

-	# Work around aliasing bugs - developers should comment this out
-	CFLAGS += -fno-strict-aliasing
-	CXXFLAGS += -fno-strict-aliasing
-
 	LDFLAGS += -Xlinker

 	ifdef DEBUG
@@ -90,7 +86,7 @@ else
 endif

 # Directories
-SRC_DIRS = gallium mesa glu glut/beos glew
+SRC_DIRS = mesa glu glut/beos
 GLU_DIRS = sgi
 DRIVER_DIRS = beos
 PROGRAM_DIRS = beos samples redbook demos tests
--- a/configs/bluegene-osmesa
+++ b/configs/bluegene-osmesa
@@ -1,33 +0,0 @@
-# Configuration for building only libOSMesa on BlueGene, no Xlib driver
-# This doesn't really have a lot of dependencies, so it should be usable
-# on other (gcc-based) systems too.
-# It uses static linking and disables multithreading.
-
-include $(TOP)/configs/default
-
-CONFIG_NAME = bluegene-osmesa
-
-# Compiler and flags
-CC = /bgl/BlueLight/ppcfloor/blrts-gnu/bin/powerpc-bgl-blrts-gnu-gcc
-CXX = /bgl/BlueLight/ppcfloor/blrts-gnu/bin/powerpc-bgl-blrts-gnu-g++
-CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
-CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURC
-
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
-MKLIB_OPTIONS = -static
-
-OSMESA_LIB_NAME = libOSMesa.a
-
-# Directories
-SRC_DIRS = mesa glu
-DRIVER_DIRS = osmesa
-PROGRAM_DIRS = osdemos
-
-
-# Dependencies
-OSMESA_LIB_DEPS = -lm
-GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
-APP_LIB_DEPS = -lOSMesa -lGLU -lm
--- a/configs/bluegene-xlc-osmesa
+++ b/configs/bluegene-xlc-osmesa
@@ -1,29 +0,0 @@
-# Configuration for building only libOSMesa on BlueGene using the IBM xlc compiler
-# This doesn't really have a lot of dependencies, so it should be usable
-# on similar systems too.
-# It uses static linking and disables multithreading.
-
-include $(TOP)/configs/default
-
-CONFIG_NAME = bluegene-osmesa
-
-# Compiler and flags
-CC = /opt/ibmcmp/vacpp/bg/8.0/bin/blrts_xlc
-CXX = /opt/ibmcmp/vacpp/bg/8.0/bin/blrts_xlC
-CFLAGS = -O3 -pedantic -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
-CXXFLAGS = -O3 -pedantic -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
-
-MKLIB_OPTIONS = -static
-
-OSMESA_LIB_NAME = libOSMesa.a
-
-# Directories
-SRC_DIRS = mesa glu
-DRIVER_DIRS = osmesa
-PROGRAM_DIRS = osdemos
-
-
-# Dependencies
-OSMESA_LIB_DEPS = -lm
-GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
-APP_LIB_DEPS = -lOSMesa -lGLU -lm
--- a/configs/catamount-osmesa-pgi
+++ b/configs/catamount-osmesa-pgi
@@ -1,32 +0,0 @@
-# Configuration for building only libOSMesa on Cray Xt3
-# for the compute nodes running Catamount using the 
-# Portland Group compiler. The Portland Group toolchain has to be 
-# enabled before using "module switch PrgEnv-gnu PrgEnv-pgi" .
-# This doesn't really have a lot of dependencies, so it should be usable
-# on other similar systems too.
-# It uses static linking and disables multithreading.
-
-include $(TOP)/configs/default
-
-CONFIG_NAME = catamount-osmesa-pgi
-
-# Compiler and flags
-CC = cc
-CXX = CC
-CFLAGS = -target=catamount -fastsse -O3 -Mnontemporal -Mprefetch=distance:8,nta   -fPIC -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
-CXXFLAGS = -target=catamount -fastsse -O3 -Mnontemporal -Mprefetch=distance:8,nta -fPIC -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
-
-MKLIB_OPTIONS = -static
-
-OSMESA_LIB_NAME = libOSMesa.a
-
-# Directories
-SRC_DIRS = mesa glu
-DRIVER_DIRS = osmesa
-PROGRAM_DIRS = osdemos
-
-
-# Dependencies
-OSMESA_LIB_DEPS = -lm
-GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
-APP_LIB_DEPS = -lOSMesa -lGLU -lm
--- a/configs/config.mgw
+++ b/configs/config.mgw
@@ -1,42 +0,0 @@
-# MinGW config include file updated for Mesa 7.0
-#
-#  Updated : by Heromyth, on 2007-7-21
-#  Email   : zxpmyth@yahoo.com.cn
-#  Bugs    : 1) All the default settings work fine. But the setting X86=1 can't work. 
-#            The others havn't been tested yet.
-#            2) The generated DLLs are *not* compatible with the ones built
-#            with the other compilers like VC8, especially for GLUT. 
-#            3) Although more tests are needed, it can be used individually!
-
-# The generated DLLs by MingW with STDCALL are not totally compatible 
-# with the ones linked by Microsoft's compilers.
-#
-# xxx_USING_STDCALL = 1          Compiling MESA with __stdcall. This is default!
-# 
-# xxx_USING_STDCALL = 0          Compiling MESA without __stdcall. I like this:)
-#  
-
-# In fact, GL_USING_STDCALL and GLUT_USING_STDCALL can be
-# different. For example:
-#
-#   GL_USING_STDCALL = 0
-#   GLUT_USING_STDCALL = 1
-# 
-# Suggested setting:
-#
-#     ALL_USING_STDCALL = 1
-#
-# That's default!
-#
-
-
-ALL_USING_STDCALL = 1
-
-
-ifeq ($(ALL_USING_STDCALL),1)
-  GL_USING_STDCALL = 1
-  GLUT_USING_STDCALL = 1
-else
-  GL_USING_STDCALL = 0
-  GLUT_USING_STDCALL = 0
-endif
--- a/configs/darwin
+++ b/configs/darwin
@@ -4,28 +4,11 @@ include $(TOP)/configs/default

 CONFIG_NAME = darwin

-INSTALL_DIR = /usr/X11
-
-X11_DIR = $(INSTALL_DIR)
-
 # Compiler and flags
-CC = gcc
-CXX = gcc
-PIC_FLAGS = -fPIC
-DEFINES =  -D_DARWIN_C_SOURCE -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L \
-	   -D_BSD_SOURCE -D_SVID_SOURCE -D_GNU_SOURCE -DPTHREADS \
-	   -DGLX_ALIAS_UNSUPPORTED -DGLX_INDIRECT_RENDERING
-
-# -DGLX_DIRECT_RENDERING - pulls in libdrm stuff in glx/x11
-# -DGLX_USE_APPLEGL      - supposed to be used with GLX_DIRECT_RENDERING to use AGL rather than DRM, but doesn't compile
-# -DIN_DRI_DRIVER
-
-ARCH_FLAGS += $(RC_CFLAGS)
-
-CFLAGS =  -ggdb3 -Os -Wall -Wmissing-prototypes -std=c99 -ffast-math -fno-strict-aliasing \
-	-I$(INSTALL_DIR)/include -I$(X11_DIR)/include $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(ASM_FLAGS) $(DEFINES)
-CXXFLAGS =  -ggdb3 -Os -Wall -fno-strict-aliasing \
-	-I$(INSTALL_DIR)/include -I$(X11_DIR)/include $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(ASM_FLAGS) $(DEFINES)
+CC = cc
+CXX = cc
+CFLAGS = -I/usr/X11R6/include -O3 -fPIC -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
+CXXFLAGS = -I/usr/X11R6/include -O3 -fPIC -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin

 # Library names (actual file names)
 GL_LIB_NAME = libGL.dylib
@@ -34,24 +17,13 @@ GLUT_LIB_NAME = libglut.dylib
 GLW_LIB_NAME = libGLw.dylib
 OSMESA_LIB_NAME = libOSMesa.dylib

-# globs used to install the lib and all symlinks
-GL_LIB_GLOB = libGL.*dylib
-GLU_LIB_GLOB = libGLU.*dylib
-GLUT_LIB_GLOB = libglut.*dylib
-GLW_LIB_GLOB = libGLw.*dylib
-OSMESA_LIB_GLOB = libOSMesa.*dylib
-
-GL_LIB_DEPS = -L$(INSTALL_DIR)/$(LIB_DIR) -L$(X11_DIR)/$(LIB_DIR) -lX11 -lXext -lm -lpthread
-OSMESA_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB)
-GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB)
-GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB)  -L$(INSTALL_DIR)/$(LIB_DIR) -L$(X11_DIR)/$(LIB_DIR) -lX11 -lXmu -lXi -lXext
-GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -L$(INSTALL_DIR)/$(LIB_DIR) -L$(X11_DIR)/$(LIB_DIR) -lX11 -lXt
-APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L$(INSTALL_DIR)/$(LIB_DIR) -L$(X11_DIR)/$(LIB_DIR) -lX11 -lXmu -lXt -lXi -lm
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread
+OSMESA_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -lGL
+GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -lGL
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -lGL -lGLU -L/usr/X11R6/lib -lX11 -lXmu -lXi -lXext
+GLW_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXt $(TOP)/lib/GL.dylib
+APP_LIB_DEPS = -L$(TOP)/lib -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm

 # omit glw lib for now:
-SRC_DIRS = glx/x11 mesa glu glut/glx glew
-GLU_DIRS = sgi
-DRIVER_DIRS = osmesa
-#DRIVER_DIRS = dri
-DRI_DIRS = swrast
-PROGRAM_DIRS = xdemos
+SRC_DIRS = mesa glu glut/glx
+
--- a/configs/darwin-fat-32bit
+++ b/configs/darwin-fat-32bit
@@ -1,7 +0,0 @@
-# Configuration for Darwin / MacOS X, making 32bit fat dynamic libs
-
-RC_CFLAGS=-arch ppc -arch i386
-
-include $(TOP)/configs/darwin
-
-CONFIG_NAME = darwin-fat-32bit
--- a/configs/darwin-fat-all
+++ b/configs/darwin-fat-all
@@ -1,7 +0,0 @@
-# Configuration for Darwin / MacOS X, making 32bit and 64bit fat dynamic libs
-
-RC_CFLAGS=-arch ppc -arch i386 -arch ppc64 -arch x86_64
-
-include $(TOP)/configs/darwin
-
-CONFIG_NAME = darwin-fat-all
--- a/configs/darwin-static
+++ b/configs/darwin-static
@@ -0,0 +1,24 @@
+# Configuration for Darwin / MacOS X, making static libs
+
+include $(TOP)/configs/darwin
+
+CONFIG_NAME = darwin-static
+
+# Compiler and flags
+CFLAGS = -I/usr/X11R6/include -O3 -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
+CXXFLAGS = -I/usr/X11R6/include -O3 -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
+MKLIB_OPTIONS = -static
+
+# Library names (actual file names)
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a
+
+GL_LIB_DEPS =
+OSMESA_LIB_DEPS = 
+GLU_LIB_DEPS = 
+GLUT_LIB_DEPS = 
+GLW_LIB_DEPS = 
+APP_LIB_DEPS = -Wl,-search_paths_first -L$(TOP)/lib -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lstdc++ -lgcc_s.1 -lm
--- a/configs/darwin-static-x86ppc
+++ b/configs/darwin-static-x86ppc
@@ -0,0 +1,26 @@
+# Configuration for Darwin / MacOS X, making static libs
+
+include $(TOP)/configs/darwin
+
+CONFIG_NAME = darwin-static
+
+# Compiler and flags
+CFLAGS = -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk \
+         -I/usr/X11R6/include -O3 -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
+CXXFLAGS = -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk \
+           -I/usr/X11R6/include -O3 -fno-common -ffast-math -funroll-loops -fexpensive-optimizations -no-cpp-precomp -dynamic -Ddarwin
+MKLIB_OPTIONS = -static -archopt "-isysroot /Developer/SDKs/MacOSX10.4u.sdk"
+
+# Library names (actual file names)
+GL_LIB_NAME = libGL.a
+GLU_LIB_NAME = libGLU.a
+GLUT_LIB_NAME = libglut.a
+GLW_LIB_NAME = libGLw.a
+OSMESA_LIB_NAME = libOSMesa.a
+
+GL_LIB_DEPS =
+OSMESA_LIB_DEPS = 
+GLU_LIB_DEPS = 
+GLUT_LIB_DEPS = 
+GLW_LIB_DEPS = 
+APP_LIB_DEPS = -Wl,-search_paths_first -L$(TOP)/lib -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lstdc++ -lgcc_s.1 -lm
--- a/configs/darwin-x86ppc
+++ b/configs/darwin-x86ppc
@@ -29,5 +29,5 @@ GLW_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXt $(TOP)/lib/GL.dylib
 APP_LIB_DEPS = -L$(TOP)/lib -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm

 # omit glw lib for now:
-SRC_DIRS = gallium mesa glu glut/glx glew
+SRC_DIRS = mesa glu glut/glx

--- a/configs/default
+++ b/configs/default
@@ -8,10 +8,9 @@
 CONFIG_NAME = default

 # Version info
-MESA_MAJOR=7
+MESA_MAJOR=6
 MESA_MINOR=5
 MESA_TINY=1
-MESA_VERSION = $(MESA_MAJOR).$(MESA_MINOR).$(MESA_TINY)

 # external projects.  This should be useless now that we use libdrm.
 DRM_SOURCE_PATH=$(TOP)/../drm
@@ -19,36 +18,26 @@ DRM_SOURCE_PATH=$(TOP)/../drm
 # Compiler and flags
 CC = cc
 CXX = CC
-HOST_CC = $(CC)
 CFLAGS = -O
 CXXFLAGS = -O
-LDFLAGS =
 GLU_CFLAGS = 

-# Compiler for building demos/tests/etc
-APP_CC = $(CC)
-APP_CXX = $(CXX)
-
 # Misc tools and flags
-SHELL = /bin/sh
-MKLIB = $(SHELL) $(TOP)/bin/mklib
 MKLIB_OPTIONS = 
 MKDEP = makedepend
 MKDEP_OPTIONS = -fdepend
 MAKE = make
-INSTALL = $(SHELL) $(TOP)/bin/minstall
+INSTALL = install
+COPY_LIBS = cp -f -d

-# Tools for regenerating glapi (generally only needed by the developers)
+# Python and flags (generally only needed by the developers)
 PYTHON2 = python
 PYTHON_FLAGS = -t -O -O
-INDENT = indent
-INDENT_FLAGS = -i4 -nut -br -brs -npcs -ce -T GLubyte -T GLbyte -T Bool

 # Library names (base name)
 GL_LIB = GL
 GLU_LIB = GLU
 GLUT_LIB = glut
-GLEW_LIB = GLEW
 GLW_LIB = GLw
 OSMESA_LIB = OSMesa

@@ -57,88 +46,42 @@ OSMESA_LIB = OSMesa
 GL_LIB_NAME = lib$(GL_LIB).so
 GLU_LIB_NAME = lib$(GLU_LIB).so
 GLUT_LIB_NAME = lib$(GLUT_LIB).so
-GLEW_LIB_NAME = lib$(GLEW_LIB).a
 GLW_LIB_NAME = lib$(GLW_LIB).so
 OSMESA_LIB_NAME = lib$(OSMESA_LIB).so

-# globs used to install the lib and all symlinks
-GL_LIB_GLOB = $(GL_LIB_NAME)*
-GLU_LIB_GLOB = $(GLU_LIB_NAME)*
-GLUT_LIB_GLOB = $(GLUT_LIB_NAME)*
-GLW_LIB_GLOB = $(GLW_LIB_NAME)*
-OSMESA_LIB_GLOB = $(OSMESA_LIB_NAME)*

 # Optional assembly language optimization files for libGL
-MESA_ASM_SOURCES = 
+ASM_SOURCES = 

 # GLw widget sources (Append "GLwMDrawA.c" here and add -lXm to GLW_LIB_DEPS in
 # order to build the Motif widget too)
 GLW_SOURCES = GLwDrawA.c
-MOTIF_CFLAGS = -I/usr/include/Motif1.2


 # Directories to build
 LIB_DIR = lib
-SRC_DIRS = mesa gallium egl gallium/winsys glu glut/glx glew glw
+SRC_DIRS = mesa glu glut/glx glw
 GLU_DIRS = sgi
 DRIVER_DIRS = x11 osmesa
 # Which subdirs under $(TOP)/progs/ to enter:
-PROGRAM_DIRS = demos redbook samples glsl xdemos
-
-# EGL directories
-EGL_DRIVERS_DIRS = demo
-
-# Gallium directories and 
-GALLIUM_DIRS = auxiliary drivers state_trackers
-GALLIUM_AUXILIARY_DIRS = draw translate cso_cache pipebuffer tgsi sct rtasm util indices
-GALLIUM_AUXILIARIES = $(foreach DIR,$(GALLIUM_AUXILIARY_DIRS),$(TOP)/src/gallium/auxiliary/$(DIR)/lib$(DIR).a)
-GALLIUM_DRIVERS_DIRS = softpipe i915simple failover trace
-GALLIUM_DRIVERS = $(foreach DIR,$(GALLIUM_DRIVERS_DIRS),$(TOP)/src/gallium/drivers/$(DIR)/lib$(DIR).a)
-GALLIUM_WINSYS_DIRS = xlib egl_xlib
-GALLIUM_WINSYS_DRM_DIRS =
-GALLIUM_STATE_TRACKERS_DIRS = glx
+PROGRAM_DIRS = demos redbook samples xdemos


-# Library dependencies
-#EXTRA_LIB_PATH ?=
-GL_LIB_DEPS     = $(EXTRA_LIB_PATH) -lX11 -lXext -lm -lpthread
-EGL_LIB_DEPS    = $(EXTRA_LIB_PATH) -lX11 -ldl
-OSMESA_LIB_DEPS = $(EXTRA_LIB_PATH) -L$(TOP)/$(LIB_DIR) -l$(GL_LIB)
-GLU_LIB_DEPS    = $(EXTRA_LIB_PATH) -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lm
-GLUT_LIB_DEPS   = $(EXTRA_LIB_PATH) -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -lX11 -lXmu -lXi -lm
-GLW_LIB_DEPS    = $(EXTRA_LIB_PATH) -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lXt -lX11
-APP_LIB_DEPS    = $(EXTRA_LIB_PATH) -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm
+# Library/program dependencies
+EXTRA_LIB_PATH ?=
+GL_LIB_DEPS = $(EXTRA_LIB_PATH) -lX11 -lXext -lm -lpthread
+OSMESA_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB)
+GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lm
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) $(EXTRA_LIB_PATH) -lX11 -lXmu -lXt -lXi -lm
+GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) $(EXTRA_LIB_PATH) -lXt -lX11
+APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm

-# Program dependencies - specific GL/glut libraries added in Makefiles
-APP_LIB_DEPS = -lm


 # Installation directories (for make install)
 INSTALL_DIR = /usr/local
-INSTALL_LIB_DIR = $(INSTALL_DIR)/$(LIB_DIR)
-INSTALL_INC_DIR = $(INSTALL_DIR)/include
-DRI_DRIVER_INSTALL_DIR = $(INSTALL_LIB_DIR)/dri
+DRI_DRIVER_INSTALL_DIR = /usr/X11R6/lib/modules/dri

 # Where libGL will look for DRI hardware drivers
 DRI_DRIVER_SEARCH_DIR = $(DRI_DRIVER_INSTALL_DIR)

-# Xorg driver install directory (for xorg state-tracker)
-XORG_DRIVER_INSTALL_DIR = $(INSTALL_LIB_DIR)/xorg/modules/drivers
-
-# pkg-config substitutions
-GL_PC_REQ_PRIV =
-GL_PC_LIB_PRIV =
-GL_PC_CFLAGS =
-DRI_PC_REQ_PRIV =
-GLU_PC_REQ = gl
-GLU_PC_REQ_PRIV =
-GLU_PC_LIB_PRIV =
-GLU_PC_CFLAGS =
-GLUT_PC_REQ_PRIV =
-GLUT_PC_LIB_PRIV =
-GLUT_PC_CFLAGS =
-GLW_PC_REQ_PRIV =
-GLW_PC_LIB_PRIV =
-GLW_PC_CFLAGS =
-OSMESA_PC_REQ =
-OSMESA_PC_LIB_PRIV =
--- a/configs/freebsd
+++ b/configs/freebsd
@@ -9,13 +9,15 @@ CC = cc
 CXX = c++
 MAKE = gmake

+# cp -d not supported on FreeBSD (see bug 4435)
+COPY_LIBS = cp -f
+
 OPT_FLAGS  = -O2
 PIC_FLAGS  = -fPIC

-DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_BSD_SOURCE -DUSE_XSHM \
-	-DHZ=100
+DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_BSD_SOURCE -DUSE_XSHM -DHZ=100

-X11_INCLUDES = -I/usr/local/include
+X11_INCLUDES = -I/usr/X11R6/include

 CFLAGS += $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(DEFINES) $(X11_INCLUDES) -ffast-math -pedantic

@@ -23,9 +25,5 @@ CXXFLAGS += $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(DEFINES) $(X11_INCLUDES)

 GLUT_CFLAGS = -fexceptions

-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
-EXTRA_LIB_PATH = -L/usr/local/lib
+EXTRA_LIB_PATH = -L/usr/X11R6/lib
 APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) $(EXTRA_LIB_PATH) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lXext -lXmu -lXi -lX11 -lm
--- a/configs/freebsd-dri
+++ b/configs/freebsd-dri
@@ -9,39 +9,31 @@ CONFIG_NAME = freebsd-dri
 CC = gcc
 CXX = g++
 WARN_FLAGS = -Wall
-OPT_FLAGS = -O -g
+OPT_FLAGS = -O

 EXPAT_INCLUDES = -I/usr/local/include
-X11_INCLUDES = -I/usr/local/include
+X11_INCLUDES = -I/usr/X11R6/include
 DEFINES = -DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 -DIN_DRI_DRIVER \
-	-DGLX_DIRECT_RENDERING -DGLX_INDIRECT_RENDERING \
-	-DHAVE_ALIAS
+	-DGLX_DIRECT_RENDERING -DHAVE_ALIAS

-CFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) -Wmissing-prototypes -std=c99 -Wundef -ffast-math \
+CFLAGS = -Wmissing-prototypes -g -std=c99 -Wundef -fPIC -ffast-math \
 	$(ASM_FLAGS) $(X11_INCLUDES) $(DEFINES)

-CXXFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(DEFINES) -Wall -ansi -pedantic $(ASM_FLAGS) $(X11_INCLUDES) 
-
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
+CXXFLAGS = $(DEFINES) -Wall -g -ansi -pedantic -fPIC

 ASM_SOURCES = 
-MESA_ASM_SOURCES = 

 # Library/program dependencies
-LIBDRM_CFLAGS = `pkg-config --cflags libdrm`
 LIBDRM_LIB = `pkg-config --libs libdrm`
-DRI_LIB_DEPS = -L/usr/local/lib -lm -pthread -lexpat $(LIBDRM_LIB)
-GL_LIB_DEPS = -L/usr/local/lib -lX11 -lXext -lXxf86vm -lXdamage -lXfixes \
-	-lm -pthread $(LIBDRM_LIB)
+DRI_LIB_DEPS = -L/usr/local/lib -lm -lpthread -lexpat $(LIBDRM_LIB)
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lXxf86vm -lm -lpthread $(LIBDRM_LIB)

-GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/local/lib -lGLU -lGL -lX11 -lXmu -lXt -lXi -lm
-GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/local/lib -lGL -lXt -lX11
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/X11R6/lib -lGLU -lGL -lX11 -lXmu -lXt -lXi -lm
+GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/X11R6/lib -lGL -lXt -lXm -lX11


 # Directories
-SRC_DIRS = glx/x11 gallium mesa glu glut/glx glew glw
+SRC_DIRS = glx/x11 mesa glu glut/glx glw
 DRIVER_DIRS = dri
 PROGRAM_DIRS = 
 WINDOW_SYSTEM=dri
@@ -50,6 +42,6 @@ DRM_SOURCE_PATH=$(TOP)/../drm

 # ffb and gamma are missing because they have not been converted to use the new
 # interface.
-DRI_DIRS = i810 i915 i965 mach64 mga r128 r200 r300 radeon tdfx \
+DRI_DIRS = i810 i915 mach64 mga r128 r200 r300 radeon tdfx \
 	   unichrome savage sis

--- a/configs/freebsd-dri-amd64
+++ b/configs/freebsd-dri-amd64
@@ -6,5 +6,5 @@ include $(TOP)/configs/freebsd-dri
 CONFIG_NAME = freebsd-dri-x86-64

 ASM_FLAGS = -DUSE_X86_64_ASM
-MESA_ASM_SOURCES = $(X86-64_SOURCES)
-GLAPI_ASM_SOURCES = $(X86-64_API)
+ASM_SOURCES = $(X86-64_SOURCES)
+ASM_API = $(X86-64_API)
--- a/configs/freebsd-dri-x86
+++ b/configs/freebsd-dri-x86
@@ -9,5 +9,5 @@ CONFIG_NAME = freebsd-dri-x86
 PIC_FLAGS = 

 ASM_FLAGS = -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM
-MESA_ASM_SOURCES = $(X86_SOURCES)
-GLAPI_ASM_SOURCES = $(X86_API)
+ASM_SOURCES = $(X86_SOURCES)
+ASM_API = $(X86_API)
--- a/configs/hpux10
+++ b/configs/hpux10
@@ -8,7 +8,7 @@ CONFIG_NAME = hpux10
 CC = cc
 CXX = aCC

-CFLAGS = -O +DAportable +z -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM
-CXXFLAGS = -O +DAportable +Z -Ae -D_HPUX_SOURCE
+CFLAGS = +O3 +DAportable +z -Aa -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM
+CXXFLAGS = +O3 +DAportable +Z -Aa -D_HPUX_SOURCE

 APP_LIB_DEPS = -$(TOP)/$(LIB_DIR) -L/usr/lib/X11R6 -L/usr/contrib/X11R6/lib -lXext -lXmu -lXi -lX11 -lm
--- a/configs/hpux10-gcc
+++ b/configs/hpux10-gcc
@@ -12,9 +12,5 @@ CFLAGS = -ansi -O3 -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/incl
 CXXFLAGS = -ansi -O3 -D_HPUX_SOURCE
 GLUT_CFLAGS = -fexceptions

-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/lib/X11R6 -L/usr/contrib/X11R6/lib -lXext -lXmu -lXi -lX11 -lm

--- a/configs/hpux10-static
+++ b/configs/hpux10-static
@@ -8,8 +8,8 @@ CONFIG_NAME = hpux10-static
 CC = cc
 CXX = aCC

-CFLAGS = -O +DAportable +z -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM
-CXXFLAGS = -O +DAportable +Z -Ae -D_HPUX_SOURCE
+CFLAGS = +O3 +DAportable +z -Aa -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM
+CXXFLAGS = +O3 +DAportable +Z -Aa -D_HPUX_SOURCE

 MKLIB_OPTIONS = -static

--- a/configs/hpux11-32
+++ b/configs/hpux11-32
@@ -8,9 +8,9 @@ CONFIG_NAME = hpux11-32
 CC = cc
 CXX = aCC

-CFLAGS = +z -Ae -O +Onolimit -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
+CFLAGS = +z -Ae +O2 +Onolimit +Oaggressive -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS

-CXXFLAGS = +z -Ae -O +Onolimit -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS
+CXXFLAGS = +z -Aa +O2 +Onolimit +Oaggressive -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS

 MKLIB_OPTIONS =

--- a/configs/hpux11-32-static
+++ b/configs/hpux11-32-static
@@ -8,9 +8,9 @@ CONFIG_NAME = hpux11-32-static
 CC = cc
 CXX = aCC

-CFLAGS = -O +DA2.0 -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
+CFLAGS = +O3 +DA2.0 -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS

-CXXFLAGS = -O +DA2.0 -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS
+CXXFLAGS = +O3 +DA2.0 -Aa -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS

 MKLIB_OPTIONS = -static

--- a/configs/hpux11-32-static-nothreads
+++ b/configs/hpux11-32-static-nothreads
@@ -8,9 +8,9 @@ CONFIG_NAME = hpux11-32-static
 CC = cc
 CXX = aCC

-CFLAGS = -O +DA2.0 -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM
+CFLAGS = +O3 +DA2.0 -Aa -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM

-CXXFLAGS = -O +DA2.0 -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include
+CXXFLAGS = +O3 +DA2.0 -Aa -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include

 MKLIB_OPTIONS = -static

--- a/configs/hpux11-64
+++ b/configs/hpux11-64
@@ -8,9 +8,9 @@ CONFIG_NAME = hpux11-64
 CC = cc
 CXX = aCC

-CFLAGS = +z -Ae +DD64 -O +Onolimit -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
+CFLAGS = +z -Ae +DD64 +O2 +Onolimit +Oaggressive -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS

-CXXFLAGS = +z -Ae +DD64 -O +Onolimit -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS
+CXXFLAGS = +z -Aa +DD64 +O2 +Onolimit +Oaggressive -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS

 MKLIB_OPTIONS =

--- a/configs/hpux11-64-static
+++ b/configs/hpux11-64-static
@@ -8,9 +8,9 @@ CONFIG_NAME = hpux11-64-static
 CC = cc
 CXX = aCC

-CFLAGS = -O +DA2.0W -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
+CFLAGS = +O3 +DA2.0W -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS

-CXXFLAGS = -O +DA2.0W -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS
+CXXFLAGS = +O3 +DA2.0W -Aa -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS

 MKLIB_OPTIONS = -static

--- a/configs/hpux11-ia64
+++ b/configs/hpux11-ia64
@@ -8,9 +8,9 @@ CONFIG_NAME = hpux11-ia64
 CC = cc
 CXX = aCC

-CFLAGS = +z -Ae +DD64 -O +DSmckinley -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
+CFLAGS = +z -Ae +DD64 +O3 +DSmckinley -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS

-CXXFLAGS = +z -Ae +DD64 -O +DSmckinley -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS
+CXXFLAGS = +z -Aa +DD64 +O3 +DSmckinley -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS

 MKLIB_OPTIONS =

--- a/configs/hpux11-ia64-static
+++ b/configs/hpux11-ia64-static
@@ -8,9 +8,9 @@ CONFIG_NAME = hpux11-ia64-static
 CC = cc
 CXX = aCC

-CFLAGS = -O +DD64 -Ae -D_HPUX_SOURCE +DSmckinley -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS
+CFLAGS = +O3 +DD64 -Aa -D_HPUX_SOURCE +DSmckinley -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM -DPTHREADS

-CXXFLAGS = -O +DD64 -Ae -D_HPUX_SOURCE +DSmckinley -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS
+CXXFLAGS = +O3 +DD64 -Aa -D_HPUX_SOURCE +DSmckinley -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DPTHREADS

 MKLIB_OPTIONS = -static

--- a/configs/hpux9
+++ b/configs/hpux9
@@ -9,8 +9,8 @@ CC = cc
 # XXX fix this
 CXX = c++

-CFLAGS = +z -O +Olibcalls +ESlit -Ae +Onolimit -D_HPUX_SOURCE -I/usr/include/X11R5 -DUSE_XSHM
-CXXFLAGS = +z -O +Olibcalls +ESlit -Ae +Onolimit -D_HPUX_SOURCE -I/usr/include/X11R5
+CFLAGS = +z +O3 +Olibcalls +ESlit -Aa +Onolimit -D_HPUX_SOURCE -I/usr/include/X11R5 -DUSE_XSHM
+CXXFLAGS = +z +O3 +Olibcalls +ESlit -Aa +Onolimit -D_HPUX_SOURCE -I/usr/include/X11R5

 APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/lib/X11R5 -s -Wl,+s,-B,nonfatal,-B,immediate -lXext -lXmu -lXi -lX11 -lm

--- a/configs/hpux9-gcc
+++ b/configs/hpux9-gcc
@@ -8,7 +8,7 @@ CONFIG_NAME = hpux9-gcc
 CC = cc
 CXX = aCC

-CFLAGS = -O +DAportable +z -Ae -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM
-CXXFLAGS = -O +DAportable +Z -Ae -D_HPUX_SOURCE
+CFLAGS = +O3 +DAportable +z -Aa -D_HPUX_SOURCE -I/usr/include/X11R6 -I/usr/contrib/X11R6/include -DUSE_XSHM
+CXXFLAGS = +O3 +DAportable +Z -Aa -D_HPUX_SOURCE

 APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/lib/X11R6 -L/usr/contrib/X11R6/lib -lXext -lXmu -lXi -lX11 -lm
--- a/configs/linux
+++ b/configs/linux
@@ -17,22 +17,16 @@ PIC_FLAGS  = -fPIC
 ARCH_FLAGS ?=

 DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
-	-D_BSD_SOURCE -D_GNU_SOURCE \
-	-DPTHREADS -DUSE_XSHM -DHAVE_POSIX_MEMALIGN
+	-D_BSD_SOURCE -DPTHREADS -DUSE_XSHM

 X11_INCLUDES = -I/usr/X11R6/include

-CFLAGS = -Wall -Wmissing-prototypes -Wdeclaration-after-statement \
-	$(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) \
+CFLAGS = -Wall -Wmissing-prototypes $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) \
 	$(DEFINES) $(ASM_FLAGS) $(X11_INCLUDES) -std=c99 -ffast-math 

 CXXFLAGS = -Wall $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \
 	$(X11_INCLUDES) 

-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 GLUT_CFLAGS = -fexceptions

 EXTRA_LIB_PATH = -L/usr/X11R6/lib
--- a/configs/linux-alpha
+++ b/configs/linux-alpha
@@ -11,10 +11,6 @@ CFLAGS = -O3 -mcpu=ev5 -ansi -mieee -pedantic -fPIC -D_XOPEN_SOURCE -DUSE_XSHM
 CXXFLAGS = -O3 -mcpu=ev5 -ansi -mieee -pedantic -fPIC -D_XOPEN_SOURCE
 GLUT_CFLAGS = -fexceptions

-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread
 GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
 GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -L/usr/X11R6/lib -lXt -lX11
--- a/configs/linux-alpha-static
+++ b/configs/linux-alpha-static
@@ -11,11 +11,7 @@ CFLAGS = -O3 -mcpu=ev5 -ansi -mieee -pedantic -D_XOPEN_SOURCE -DUSE_XSHM
 CXXFLAGS = -O3 -mcpu=ev5 -ansi -mieee -pedantic -D_XOPEN_SOURCE
 GLUT_CFLAGS = -fexceptions
 MKLIB_OPTIONS = -static
-PIC_FLAGS =

-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing

 # Library names (actual file names)
 GL_LIB_NAME = libGL.a
--- a/configs/linux-cell
+++ b/configs/linux-cell
@@ -1,67 +0,0 @@
-# linux-cell  (non-debug build)
-
-include $(TOP)/configs/default
-
-CONFIG_NAME = linux-cell
-
-
-# Omiting other gallium drivers:
-GALLIUM_DRIVERS_DIRS = cell softpipe trace
-
-
-# Compiler and flags
-CC = ppu32-gcc
-CXX = ppu32-g++
-HOST_CC = gcc
-APP_CC = gcc
-APP_CXX = g++
-
-OPT_FLAGS = -O3
-
-# Cell SDK location
-## For SDK 2.1: (plus, remove -DSPU_MAIN_PARAM_LONG_LONG below)
-#SDK = /opt/ibm/cell-sdk/prototype/sysroot/usr
-## For SDK 3.0:
-SDK = /opt/cell/sdk/usr
-
-
-CFLAGS = $(OPT_FLAGS) -Wall -Winline -Wmissing-prototypes \
-	-fPIC -m32 -std=c99 -mabi=altivec -maltivec \
-	-I. -I$(SDK)/include \
-	-DGALLIUM_CELL -DUSE_XSHM -D_BSD_SOURCE -D_SVID_SOURCE
-
-CXXFLAGS = $(CFLAGS)
-
-# Omitting glw here:
-SRC_DIRS = gallium mesa gallium/winsys glu glut/glx glew
-
-# Build no traditional Mesa drivers:
-DRIVER_DIRS =
-
-
-MKDEP_OPTIONS = -fdepend -Y
-
-
-GL_LIB_DEPS = $(EXTRA_LIB_PATH) -lX11 -lXext -lm -lpthread \
-	-L$(SDK)/lib -m32 -Wl,-m,elf32ppc -R$(SDK)/lib -lspe2
-
-
-CELL_SPU_LIB = $(TOP)/src/gallium/drivers/cell/spu/g3d_spu.a
-
-
-### SPU stuff
-
-SPU_CC = spu-gcc
-
-SPU_CFLAGS = $(OPT_FLAGS) -W -Wall -Winline -Wmissing-prototypes -Wno-main \
-	-I. -I$(SDK)/spu/include -I$(TOP)/src/mesa/ $(INCLUDE_DIRS) \
-	-DSPU_MAIN_PARAM_LONG_LONG \
-	-include spu_intrinsics.h
-
-SPU_LFLAGS = -L$(SDK)/spu/lib -Wl,-N -lmisc -lm
-
-SPU_AR = ppu-ar
-SPU_AR_FLAGS = -qcs
-
-SPU_EMBED = ppu32-embedspu
-SPU_EMBED_FLAGS = -m32
--- a/configs/linux-cell-debug
+++ b/configs/linux-cell-debug
@@ -1,10 +0,0 @@
-# linux-cell-debug
-
-include $(TOP)/configs/linux-cell
-
-# just override name and OPT_FLAGS here:
-
-CONFIG_NAME = linux-cell-debug
-
-OPT_FLAGS = -g -DDEBUG
-
--- a/configs/linux-directfb
+++ b/configs/linux-directfb
@@ -13,20 +13,16 @@ CFLAGS   = -Wall -O3 -ffast-math -fPIC -std=c99 -D_GNU_SOURCE -D_POSIX_SOURCE -D

 CXXFLAGS = -Wall -O3 -fPIC -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE   

-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 HAVE_X86 = $(shell uname -m | grep 'i[3-6]86' >/dev/null && echo yes)
 ifeq ($(HAVE_X86), yes)
     CFLAGS   += -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM
     CXXFLAGS += -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM
-     MESA_ASM_SOURCES = $(X86_SOURCES)
-     GLAPI_ASM_SOURCES = $(X86_API)
+     ASM_SOURCES = $(X86_SOURCES)
+     ASM_API = $(X86_API)
 endif

 # Directories
-SRC_DIRS     = gallium mesa glu glut/directfb glew
+SRC_DIRS     = mesa glu glut/directfb
 GLU_DIRS     = sgi
 DRIVER_DIRS  = directfb
 PROGRAM_DIRS = demos directfb
--- a/configs/linux-dri
+++ b/configs/linux-dri
@@ -13,7 +13,7 @@ CXX = g++
 #MKDEP = gcc -M
 #MKDEP_OPTIONS = -MF depend

-OPT_FLAGS  = -O2 -g
+OPT_FLAGS  = -O -g
 PIC_FLAGS  = -fPIC

 # Add '-DGLX_USE_TLS' to ARCH_FLAGS to enable TLS support.
@@ -22,8 +22,7 @@ ARCH_FLAGS ?=
 DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
 	-D_BSD_SOURCE -D_GNU_SOURCE \
 	-DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 -DIN_DRI_DRIVER \
-	-DGLX_DIRECT_RENDERING -DGLX_INDIRECT_RENDERING \
-	-DHAVE_ALIAS -DHAVE_POSIX_MEMALIGN
+	-DGLX_DIRECT_RENDERING -DHAVE_ALIAS

 X11_INCLUDES = -I/usr/X11R6/include

@@ -32,36 +31,37 @@ CFLAGS = -Wall -Wmissing-prototypes -std=c99 -ffast-math \

 CXXFLAGS = -Wall $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)

-GLUT_CFLAGS = -fexceptions

-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
-MESA_ASM_SOURCES = 
+ASM_SOURCES = 

 # Library/program dependencies
 EXTRA_LIB_PATH=-L/usr/X11R6/lib

-LIBDRM_CFLAGS = $(shell pkg-config --cflags libdrm)
-LIBDRM_LIB = $(shell pkg-config --libs libdrm)
+LIBDRM_LIB = `pkg-config --libs libdrm`
 DRI_LIB_DEPS  = $(EXTRA_LIB_PATH) -lm -lpthread -lexpat -ldl $(LIBDRM_LIB)
-GL_LIB_DEPS   = $(EXTRA_LIB_PATH) -lX11 -lXext -lXxf86vm -lXdamage -lXfixes \
-		-lm -lpthread -ldl $(LIBDRM_LIB)
+GL_LIB_DEPS   = $(EXTRA_LIB_PATH) -lX11 -lXext -lXxf86vm -lm -lpthread -ldl \
+                $(LIBDRM_LIB)


+# This is now 0 by default since it seems to confuse the hell out of people
+# and generate a lot of extra noise on bugzilla.  If you need to build with
+# EGL, do 'make linux-dri USING_EGL=1'
+
+USING_EGL=0
+
 # Directories
-SRC_DIRS := glx/x11 egl $(SRC_DIRS)
-PROGRAM_DIRS := egl $(PROGRAM_DIRS)
-
-# EGL directories
-EGL_DRIVERS_DIRS = demo glx
+ifeq ($(USING_EGL), 1)
+SRC_DIRS = egl glx/x11 mesa glu glut/glx glw
+PROGRAM_DIRS = egl
+else
+SRC_DIRS = glx/x11 mesa glu glut/glx glw
+PROGRAM_DIRS =
+endif

 DRIVER_DIRS = dri
-WINDOW_SYSTEM = dri
-GALLIUM_WINSYS_DIRS = drm
-GALLIUM_WINSYS_DRM_DIRS = intel
-GALLIUM_STATE_TRACKERS_DIRS = egl
+WINDOW_SYSTEM=dri

-DRI_DIRS = i810 i915 i965 mach64 mga r128 r200 r300 radeon s3v \
-	savage sis tdfx trident unichrome ffb swrast
+# gamma are missing because they have not been converted to use the new
+# interface.
+DRI_DIRS = i810 i915 mach64 mga r128 r200 r300 radeon s3v \
+	savage sis tdfx trident unichrome ffb
--- a/configs/linux-dri-debug
+++ b/configs/linux-dri-debug
@@ -1,16 +0,0 @@
-# -*-makefile-*-
-# Configuration for linux-dri-debug: Linux DRI hardware drivers for XFree86 & others
-
-include $(TOP)/configs/linux-dri
-
-CONFIG_NAME = linux-dri-debug
-OPT_FLAGS  = -O0 -g
-ARCH_FLAGS = -DDEBUG
-
-# Helpful to reduce the amount of stuff that gets built sometimes:
-#DRI_DIRS = i915tex i915 
-#DRI_DIRS = i965
-#DRI_DIRS = radeon r200 r300
-#DRI_DIRS = unichrome sis trident
-#DRI_DIRS = i810 mga r128 tdfx
-
--- a/configs/linux-dri-ppc
+++ b/configs/linux-dri-ppc
@@ -9,7 +9,7 @@ OPT_FLAGS = -Os -mcpu=603
 PIC_FLAGS = -fPIC

 ASM_FLAGS = -DUSE_PPC_ASM -DUSE_VMX_ASM
-MESA_ASM_SOURCES = $(PPC_SOURCES)
+ASM_SOURCES = $(PPC_SOURCES)

 # Build only the drivers for cards that exist on PowerPC.  At some point MGA
 # will be added, but not yet.
--- a/configs/linux-dri-x86
+++ b/configs/linux-dri-x86
@@ -5,9 +5,13 @@ include $(TOP)/configs/linux-dri

 CONFIG_NAME = linux-dri-x86

-ARCH_FLAGS = -m32 -mmmx -msse -msse2
+# Unnecessary on x86, generally.
+PIC_FLAGS = 
+
+# Add -m32 to CFLAGS:
+ARCH_FLAGS = -m32

 ASM_FLAGS = -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM
-MESA_ASM_SOURCES = $(X86_SOURCES)
-GLAPI_ASM_SOURCES = $(X86_API)
+ASM_SOURCES = $(X86_SOURCES)
+ASM_API = $(X86_API)

--- a/configs/linux-dri-x86-64
+++ b/configs/linux-dri-x86-64
@@ -8,8 +8,8 @@ CONFIG_NAME = linux-dri-x86-64
 ARCH_FLAGS = -m64

 ASM_FLAGS = -DUSE_X86_64_ASM
-MESA_ASM_SOURCES = $(X86-64_SOURCES)
-GLAPI_ASM_SOURCES = $(X86-64_API)
+ASM_SOURCES = $(X86-64_SOURCES)
+ASM_API = $(X86-64_API)

 LIB_DIR = lib64

@@ -20,5 +20,5 @@ EXTRA_LIB_PATH=-L/usr/X11R6/lib64
 # the new interface.  i810 are missing because there is no x86-64
 # system where they could *ever* be used.
 #
-DRI_DIRS = i915 i965 mach64 mga r128 r200 r300 radeon savage tdfx unichrome
+DRI_DIRS = i915 mach64 mga r128 r200 radeon tdfx unichrome savage r300

--- a/configs/linux-dri-xcb
+++ b/configs/linux-dri-xcb
@@ -22,30 +22,25 @@ ARCH_FLAGS ?=
 DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
 	-D_BSD_SOURCE -D_GNU_SOURCE \
 	-DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 -DIN_DRI_DRIVER \
-	-DGLX_DIRECT_RENDERING -DGLX_INDIRECT_RENDERING \
-        -DHAVE_ALIAS -DUSE_XCB -DHAVE_POSIX_MEMALIGN
+	-DGLX_DIRECT_RENDERING -DHAVE_ALIAS -DUSE_XCB

-X11_INCLUDES = $(shell pkg-config --cflags-only-I x11) $(shell pkg-config --cflags-only-I xcb) $(shell pkg-config --cflags-only-I x11-xcb) $(shell pkg-config --cflags-only-I xcb-glx)
+X11_INCLUDES = `pkg-config --cflags-only-I x11` `pkg-config --cflags-only-I xcb` `pkg-config --cflags-only-I xcb-glx`

 CFLAGS = -Wall -Wmissing-prototypes $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) \
 	$(DEFINES) $(ASM_FLAGS) -std=c99 -ffast-math 

 CXXFLAGS = -Wall $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)

-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing

-MESA_ASM_SOURCES = 
+ASM_SOURCES = 

 # Library/program dependencies
-EXTRA_LIB_PATH=$(shell pkg-config --libs-only-L x11)
+EXTRA_LIB_PATH=`pkg-config --libs-only-L x11`

-LIBDRM_CFLAGS = $(shell pkg-config --cflags libdrm)
-LIBDRM_LIB = $(shell pkg-config --libs libdrm)
+LIBDRM_LIB = `pkg-config --libs libdrm`
 DRI_LIB_DEPS  = $(EXTRA_LIB_PATH) -lm -lpthread -lexpat -ldl $(LIBDRM_LIB)
 GL_LIB_DEPS   = $(EXTRA_LIB_PATH) -lX11 -lXext -lXxf86vm -lm -lpthread -ldl \
-                $(LIBDRM_LIB) $(shell pkg-config --libs xcb) $(shell pkg-config --libs x11-xcb) $(shell pkg-config --libs xcb-glx)
+                $(LIBDRM_LIB) `pkg-config --libs xcb` `pkg-config --libs xcb-glx`


 # This is now 0 by default since it seems to confuse the hell out of people
@@ -56,11 +51,11 @@ USING_EGL=0

 # Directories
 ifeq ($(USING_EGL), 1)
-SRC_DIRS = egl glx/x11 gallium mesa glu glut/glx glew glw
+SRC_DIRS = egl glx/x11 mesa glu glut/glx glw
 PROGRAM_DIRS = egl
 else
-SRC_DIRS = glx/x11 gallium mesa glu glut/glx glew glw
-PROGRAM_DIRS = xdemos
+SRC_DIRS = glx/x11 mesa glu glut/glx glw
+PROGRAM_DIRS =
 endif

 DRIVER_DIRS = dri
@@ -69,4 +64,4 @@ WINDOW_SYSTEM=dri
 # gamma are missing because they have not been converted to use the new
 # interface.
 DRI_DIRS = i810 i915 mach64 mga r128 r200 r300 radeon s3v \
-	savage sis tdfx trident unichrome ffb 
+	savage sis tdfx trident unichrome ffb
--- a/configs/linux-egl
+++ b/configs/linux-egl
@@ -1,65 +0,0 @@
-# -*-makefile-*-
-# Configuration for linux-dri: Linux DRI hardware drivers for XFree86 & others
-
-include $(TOP)/configs/default
-
-CONFIG_NAME = linux-dri
-
-# Compiler and flags
-CC = gcc
-CXX = g++
-
-#MKDEP = /usr/X11R6/bin/makedepend
-#MKDEP = gcc -M
-#MKDEP_OPTIONS = -MF depend
-
-OPT_FLAGS  = -O -g
-PIC_FLAGS  = -fPIC
-
-# Add '-DGLX_USE_TLS' to ARCH_FLAGS to enable TLS support.
-ARCH_FLAGS ?=
-
-DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
-	-D_BSD_SOURCE -D_GNU_SOURCE \
-	-DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 -DIN_DRI_DRIVER \
-	-DGLX_DIRECT_RENDERING -DGLX_INDIRECT_RENDERING \
-	-DHAVE_ALIAS -DHAVE_POSIX_MEMALIGN
-
-X11_INCLUDES = -I/usr/X11R6/include
-
-CFLAGS = -Wall -Wmissing-prototypes -std=c99 -ffast-math \
-	$(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) $(ASM_FLAGS)
-
-CXXFLAGS = -Wall $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
-
-
-MESA_ASM_SOURCES = 
-
-# Library/program dependencies
-EXTRA_LIB_PATH=-L/usr/X11R6/lib
-
-LIBDRM_CFLAGS = $(shell pkg-config --cflags libdrm)
-LIBDRM_LIB = $(shell pkg-config --libs libdrm)
-DRI_LIB_DEPS  = $(EXTRA_LIB_PATH) -lm -lpthread -lexpat -ldl $(LIBDRM_LIB)
-GL_LIB_DEPS   = $(EXTRA_LIB_PATH) -lX11 -lXext -lXxf86vm -lXdamage -lXfixes \
-		-lm -lpthread -ldl \
-                $(LIBDRM_LIB)
-
-
-# This is now 0 by default since it seems to confuse the hell out of people
-# and generate a lot of extra noise on bugzilla.  If you need to build with
-# EGL, do 'make linux-dri USING_EGL=1'
-
-USING_EGL=0
-
-# Directories
-SRC_DIRS = gallium mesa gallium/winsys glu egl
-PROGRAM_DIRS = egl
-
-DRIVER_DIRS = dri
-WINDOW_SYSTEM = dri
-GALLIUM_WINSYS_DIRS = egl_drm
-
-# gamma are missing because they have not been converted to use the new
-# interface.
-DRI_DIRS = intel 
--- a/configs/linux-fbdev
+++ b/configs/linux-fbdev
@@ -3,17 +3,8 @@
 include $(TOP)/configs/linux

 CONFIG_NAME = linux-fbdev
+DRIVER_DIRS = fbdev

-CFLAGS = -O3 -ffast-math -ansi -pedantic -fPIC -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DPTHREADS -DUSE_GLFBDEV_DRIVER
-
-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-
-SRC_DIRS = gallium mesa glu glut/fbdev glew
-DRIVER_DIRS = fbdev osmesa
-PROGRAM_DIRS = fbdev demos redbook samples
-
-GL_LIB_DEPS = $(EXTRA_LIB_PATH) -lm -lpthread
-OSMESA_LIB_DEPS = -lm -lpthread
-GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) $(EXTRA_LIB_PATH) -lgpm -lm
+CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS -DUSE_GLFBDEV_DRIVER

+PROGRAM_DIRS = fbdev
--- a/configs/linux-glide
+++ b/configs/linux-glide
@@ -12,9 +12,6 @@ CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE
 CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
 GLUT_CFLAGS = -fexceptions

-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing

 # Library/program dependencies
 GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -L/usr/local/glide/lib -lglide3x -lm -lpthread
--- a/configs/linux-icc
+++ b/configs/linux-icc
@@ -16,7 +16,7 @@ GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread
 GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
 APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm

-MESA_ASM_SOURCES = $(X86_SOURCES)
-GLAPI_ASM_SOURCES = $(X86_API)
+ASM_SOURCES = $(X86_SOURCES)
+ASM_API = $(X86_API)


--- a/configs/linux-icc-static
+++ b/configs/linux-icc-static
@@ -23,5 +23,5 @@ GL_LIB_DEPS =
 GLUT_LIB_DEPS =
 APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm -lpthread -lcxa -lunwind

-MESA_ASM_SOURCES = $(X86_SOURCES)
-GLAPI_ASM_SOURCES = $(X86_API)
+ASM_SOURCES = $(X86_SOURCES)
+ASM_API = $(X86_API)
--- a/configs/linux-indirect
+++ b/configs/linux-indirect
@@ -23,8 +23,7 @@ ARCH_FLAGS ?=

 DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
 	-D_BSD_SOURCE -D_GNU_SOURCE \
-	-DGLX_INDIRECT_RENDERING \
-	-DPTHREADS -DHAVE_ALIAS -DHAVE_POSIX_MEMALIGN
+	-DPTHREADS -DHAVE_ALIAS

 X11_INCLUDES = -I/usr/X11R6/include

@@ -33,11 +32,8 @@ CFLAGS   = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \

 CXXFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)

-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing

-MESA_ASM_SOURCES = 
+ASM_SOURCES = 

 # Library/program dependencies
 EXTRA_LIB_PATH=-L/usr/X11R6/lib
@@ -47,7 +43,7 @@ GL_LIB_DEPS   = $(EXTRA_LIB_PATH) -lX11 -lXext -lXxf86vm -lm -lpthread -ldl


 # Directories
-SRC_DIRS = glx/x11 glu glut/glx glew glw
+SRC_DIRS = glx/x11 glu glut/glx glw
 DRIVER_DIRS =
 PROGRAM_DIRS = 
 WINDOW_SYSTEM=dri
--- a/configs/linux-llvm
+++ b/configs/linux-llvm
@@ -1,35 +0,0 @@
-# -*-makefile-*-
-# Configuration for Linux and LLVM with debugging info
-
-include $(TOP)/configs/linux
-
-CONFIG_NAME = linux-llvm
-
-GALLIUM_AUXILIARY_DIRS += gallivm
-
-OPT_FLAGS = -g -ansi -pedantic
-DEFINES += -DDEBUG -DDEBUG_MATH -DMESA_LLVM=1
-
-LLVM_VERSION := $(shell llvm-config --version)
-
-ifeq ($(LLVM_VERSION),)
-  $(warning Could not find LLVM! Make Sure 'llvm-config' is in the path)
-  MESA_LLVM=0
-else
-  MESA_LLVM=1
-  $(info Using LLVM version: $(LLVM_VERSION))
-endif
-
-ifeq ($(MESA_LLVM),1)
-#  LLVM_CFLAGS=`llvm-config --cflags`
-  LLVM_CXXFLAGS=`llvm-config --cxxflags backend bitreader engine ipo interpreter instrumentation` -Wno-long-long
-  LLVM_LDFLAGS=`llvm-config --ldflags backend bitreader engine ipo interpreter instrumentation`
-  LLVM_LIBS=`llvm-config --libs backend bitreader engine ipo interpreter instrumentation`
-  MKLIB_OPTIONS=-cplusplus
-else
-  LLVM_CFLAGS=
-  LLVM_CXXFLAGS=
-endif
-
-LD = g++
-GL_LIB_DEPS = $(LLVM_LDFLAGS) $(LLVM_LIBS) $(EXTRA_LIB_PATH) -lX11 -lXext -lm -lpthread -lstdc++
--- a/configs/linux-osmesa
+++ b/configs/linux-osmesa
@@ -12,12 +12,9 @@ CXX = g++
 CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DPTHREADS
 CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE

-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing

 # Directories
-SRC_DIRS = gallium mesa glu
+SRC_DIRS = mesa glu
 DRIVER_DIRS = osmesa
 PROGRAM_DIRS = osdemos

@@ -25,4 +22,4 @@ PROGRAM_DIRS = osdemos
 # Dependencies
 OSMESA_LIB_DEPS = -lm -lpthread
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
-APP_LIB_DEPS = -lm -lpthread
+APP_LIB_DEPS = -lOSMesa -lGLU
--- a/configs/linux-osmesa-static
+++ b/configs/linux-osmesa-static
@@ -1,37 +0,0 @@
-# Configuration for building static libOSMesa.a on Linux, no Xlib driver
-# This doesn't really have any Linux dependencies, so it should be usable
-# on other (gcc-based) systems.
-
-include $(TOP)/configs/default
-
-CONFIG_NAME = linux-osmesa
-
-# Compiler and flags
-CC = gcc -m32
-CXX = g++ -m32
-CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DPTHREADS
-CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
-
-MKLIB_OPTIONS = -static
-
-# Library names (actual file names)
-GL_LIB_NAME = libGL.a
-GLU_LIB_NAME = libGLU.a
-GLUT_LIB_NAME = libglut.a
-GLW_LIB_NAME = libGLw.a
-OSMESA_LIB_NAME = libOSMesa.a
-
-# Directories
-SRC_DIRS = mesa glu
-DRIVER_DIRS = osmesa
-PROGRAM_DIRS = osdemos
-
-
-# Dependencies
-GL_LIB_DEPS =
-OSMESA_LIB_DEPS =
-GLU_LIB_DEPS =
-GLUT_LIB_DEPS =
-GLW_LIB_DEPS =
-APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) \
-               $(EXTRA_LIB_PATH) -lX11 -lXmu -lXt -lXi -lpthread -lstdc++ -lm
--- a/configs/linux-osmesa16
+++ b/configs/linux-osmesa16
@@ -10,9 +10,6 @@ CXX = g++
 CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS -I/usr/X11R6/include -DCHAN_BITS=16 -DDEFAULT_SOFTWARE_DEPTH_BITS=31
 CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE

-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing

 # Library names
 OSMESA_LIB = OSMesa16
@@ -20,7 +17,7 @@ OSMESA_LIB_NAME = libOSMesa16.so


 # Directories
-SRC_DIRS = gallium mesa glu
+SRC_DIRS = mesa glu
 DRIVER_DIRS = osmesa
 PROGRAM_DIRS = 

@@ -28,4 +25,4 @@ PROGRAM_DIRS =
 # Dependencies
 OSMESA_LIB_DEPS = -lm -lpthread
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
-APP_LIB_DEPS = -lm -lpthread
+APP_LIB_DEPS = -lOSMesa16
--- a/configs/linux-osmesa16-static
+++ b/configs/linux-osmesa16-static
@@ -10,11 +10,7 @@ CXX = g++
 CFLAGS = -O3 -ansi -pedantic -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS -I/usr/X11R6/include -DCHAN_BITS=16 -DDEFAULT_SOFTWARE_DEPTH_BITS=31
 CXXFLAGS = -O3 -ansi -pedantic -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE
 MKLIB_OPTIONS = -static
-PIC_FLAGS =

-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing

 # Library names
 OSMESA_LIB = OSMesa16
@@ -22,11 +18,11 @@ OSMESA_LIB_NAME = libOSMesa16.a


 # Directories
-SRC_DIRS = gallium mesa glu
+SRC_DIRS = mesa glu
 DRIVER_DIRS = osmesa
 PROGRAM_DIRS = 


 # Dependencies
 OSMESA_LIB_DEPS = -lm -lpthread
-APP_LIB_DEPS = -lm -lpthread
+APP_LIB_DEPS = -lOSMesa16
--- a/configs/linux-osmesa32
+++ b/configs/linux-osmesa32
@@ -10,9 +10,6 @@ CXX = g++
 CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS -I/usr/X11R6/include -DCHAN_BITS=32 -DDEFAULT_SOFTWARE_DEPTH_BITS=31
 CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE

-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing

 # Library names
 OSMESA_LIB = OSMesa32
@@ -20,7 +17,7 @@ OSMESA_LIB_NAME = libOSMesa32.so


 # Directories
-SRC_DIRS = gallium mesa glu
+SRC_DIRS = mesa glu
 DRIVER_DIRS = osmesa
 PROGRAM_DIRS = 

@@ -28,4 +25,4 @@ PROGRAM_DIRS =
 # Dependencies
 OSMESA_LIB_DEPS = -lm -lpthread
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(OSMESA_LIB)
-APP_LIB_DEPS = -lm -lpthread
+APP_LIB_DEPS = -lOSMesa32
--- a/configs/linux-ppc-static
+++ b/configs/linux-ppc-static
@@ -5,7 +5,6 @@ include $(TOP)/configs/linux-ppc
 CONFIG_NAME = linux-ppc-static

 MKLIB_OPTIONS = -static
-PIC_FLAGS =

 # Library names (actual file names)
 GL_LIB_NAME = libGL.a
--- a/configs/linux-profile
+++ b/configs/linux-profile
@@ -1,8 +1,29 @@
 # Configuration for profiling on Linux with gprof

-include $(TOP)/configs/linux-static
+include $(TOP)/configs/default

 CONFIG_NAME = linux-profile

-OPT_FLAGS = -pg -g -O2
-DEFINES += -DNDEBUG
+# Compiler and flags
+CC = gcc
+CXX = g++
+
+CFLAGS = -pg -O -ansi -pedantic -Wall -Wmissing-prototypes -Wundef -fPIC -ffast-math -D_POSIX_SOURCE -D_SVID_SOURCE -D_BSD_SOURCE -I/usr/X11R6/include -DUSE_XSHM -DPTHREADS -DDEBUG
+
+CXXFLAGS = -pg -O -ansi -pedantic -Wall -Wundef -fPIC -ffast-math -D_POSIX_SOURCE -D_SVID_SOURCE -D_BSD_SOURCE -DDEBUG
+
+GLUT_CFLAGS = -fexceptions
+
+# Need to have -L/usr/X11R6/lib in these:
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
+GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lXt -L/usr/X11R6/lib -lX11
+
+# Need to make static libs for profiling:
+MKLIB_OPTIONS = -static
+GL_LIB_NAME = lib$(GL_LIB).a
+GLU_LIB_NAME = lib$(GLU_LIB).a
+GLUT_LIB_NAME = lib$(GLUT_LIB).a
+GLW_LIB_NAME = lib$(GLW_LIB).a
+OSMESA_LIB_NAME = lib$(OSMesa).a
+APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm -lpthread
--- a/configs/linux-solo
+++ b/configs/linux-solo
@@ -15,40 +15,29 @@ PIC_FLAGS  = -fPIC
 # Add '-DGLX_USE_TLS' to ARCH_FLAGS to enable TLS support.
 ARCH_FLAGS ?=

-# DRM and pciaccess
-LIBDRM_CFLAGS = $(shell pkg-config --cflags libdrm)
-LIBDRM_LIB = $(shell pkg-config --libs libdrm)
-PCIACCESS_CFLAGS = $(shell pkg-config --cflags pciaccess)
-PCIACCESS_LIB = $(shell pkg-config --libs pciaccess)
-
-
 DEFINES = -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE \
-	-D_BSD_SOURCE -D_GNU_SOURCE -DHAVE_POSIX_MEMALIGN \
-	-DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 -DIN_DRI_DRIVER \
-	-DHAVE_ALIAS
+	-D_BSD_SOURCE -D_GNU_SOURCE \
+	-DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 -DDRM_USE_MALLOC -DIN_DRI_DRIVER

 CFLAGS   = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \
 	$(ASM_FLAGS) -std=c99 -ffast-math 

 CXXFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)

-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing

-MESA_ASM_SOURCES = 
+ASM_SOURCES = 

 # Library/program dependencies
-DRI_LIB_DEPS = -lm -lpthread -lexpat -ldl -L$(TOP)/$(LIB_DIR) $(PCIACCESS_LIB)
+DRI_LIB_DEPS = -lm -lpthread -lexpat -ldl -L$(TOP)/$(LIB_DIR) 
 GL_LIB_DEPS = -lm -lpthread -ldl
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lm
 GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -lm
 APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm -lpthread

 # Directories
-SRC_DIRS = glx/mini gallium mesa glu glut/mini glew
+SRC_DIRS = glx/mini mesa glu glut/mini
 DRIVER_DIRS = dri
 PROGRAM_DIRS = miniglx

-#DRI_DIRS = ffb gamma sis savage tdfx unichrome fb
-DRI_DIRS = i810 i915tex i915 mach64 mga r128 r200 radeon
+#DRI_DIRS = ffb gamma sis savage
+DRI_DIRS = i810 i915 mach64 mga r128 r200 radeon tdfx unichrome fb
--- a/configs/linux-solo-x86
+++ b/configs/linux-solo-x86
@@ -5,6 +5,9 @@ include $(TOP)/configs/linux-solo

 CONFIG_NAME = linux-solo-x86

+# Unnecessary on x86, generally.
+PIC_FLAGS = 
+
 ASM_FLAGS = -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM
-MESA_ASM_SOURCES = $(X86_SOURCES)
-GLAPI_ASM_SOURCES = $(X86_API)
+ASM_SOURCES = $(X86_SOURCES)
+ASM_API = $(X86_API)
--- a/configs/linux-sparc
+++ b/configs/linux-sparc
@@ -1,9 +1,30 @@
 # Configuration for Linux on Sparc

-include $(TOP)/configs/linux
+include $(TOP)/configs/default

 CONFIG_NAME = linux-sparc

-#ASM_FLAGS = -DUSE_SPARC_ASM
-#MESA_ASM_SOURCES = $(SPARC_SOURCES)
-#GLAPI_ASM_SOURCES = $(SPARC_API)
+# Compiler and flags
+CC = gcc
+CXX = g++
+
+WARN_FLAGS = -Wall
+OPT_FLAGS  = -O2
+PIC_FLAGS  = -fPIC
+
+DEFINES = -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM
+
+X11_INCLUDES = -I/usr/X11R6/include
+
+CFLAGS   = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \
+	$(ASM_FLAGS) -std=c99 -ffast-math 
+
+CXXFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES)
+
+GLUT_CFLAGS = -fexceptions
+
+EXTRA_LIB_PATH=-L/usr/X11R6/lib
+
+GL_LIB_DEPS = $(EXTRA_LIB_PATH) -lX11 -lXext -lm -lpthread
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) $(EXTRA_LIB_PATH) -lX11 -lXmu -lXt -lXi -lm
+GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) $(EXTRA_LIB_PATH) -lXt -lX11
--- a/configs/linux-sparc5
+++ b/configs/linux-sparc5
@@ -1,7 +1,17 @@
 # Configuration for Linux on Sparc5

-include $(TOP)/configs/linux-sparc
+include $(TOP)/configs/default

 CONFIG_NAME = linux-sparc5

-ARCH_FLAGS += -mcpu=ultrasparc
+# Compiler and flags
+CC = gcc
+CXX = g++
+CFLAGS = -mcpu=ultrasparc -O2 -ffast-math -ansi -pedantic -fPIC -D_SVID_SOURCE -D_BSD_SOURCE -I/usr/X11R6/include -DUSE_XSHM
+CXXFLAGS = -mcpu=ultrasparc -O2 -ffast-math -ansi -pedantic -fPIC -D_SVID_SOURCE -D_BSD_SOURCE
+GLUT_CFLAGS = -fexceptions
+
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
+GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -L/usr/X11R6/lib -lXt -lX11
+
--- a/configs/linux-static
+++ b/configs/linux-static
@@ -5,7 +5,6 @@ include $(TOP)/configs/linux
 CONFIG_NAME = linux-static

 MKLIB_OPTIONS = -static
-PIC_FLAGS =

 # Library names (actual file names)
 GL_LIB_NAME = libGL.a
@@ -20,7 +19,3 @@ OSMESA_LIB_DEPS =
 GLU_LIB_DEPS = 
 GLUT_LIB_DEPS = 
 GLW_LIB_DEPS = 
-
-# Need to specify all libraries we may need
-APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) \
-	-l$(GL_LIB) -lm -L/usr/X11R6/lib/ -lX11 -lXext -lXmu -lXi -lpthread
--- a/configs/linux-ultrasparc
+++ b/configs/linux-ultrasparc
@@ -1,7 +1,17 @@
 # Configuration for Linux on UltraSparc

-include $(TOP)/configs/linux-sparc
+include $(TOP)/configs/default

 CONFIG_NAME = linux-ultrasparc

-ARCH_FLAGS += -mv8 -mtune=ultrasparc
+# Compiler and flags
+CC = gcc
+CXX = g++
+CFLAGS = -mv8 -O2 -mtune=ultrasparc -ansi -pedantic -fPIC -D_SVID_SOURCE -D_BSD_SOURCE -I/usr/X11R6/include -DUSE_XSHM
+CXXFLAGS = -mv8 -O2 -mtune=ultrasparc -ansi -pedantic -fPIC -D_SVID_SOURCE -D_BSD_SOURCE
+GLUT_CFLAGS = -fexceptions
+
+GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread
+GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm
+GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -L/usr/X11R6/lib -lXt -lX11
+APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR)-l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm
--- a/configs/linux-x86
+++ b/configs/linux-x86
@@ -4,8 +4,6 @@ include $(TOP)/configs/linux

 CONFIG_NAME = linux-x86

-ARCH_FLAGS = -m32 -mmmx -msse -msse2
-
 ASM_FLAGS = -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM
-MESA_ASM_SOURCES = $(X86_SOURCES)
-GLAPI_ASM_SOURCES = $(X86_API)
+ASM_SOURCES = $(X86_SOURCES)
+ASM_API = $(X86_API)
--- a/configs/linux-x86-64
+++ b/configs/linux-x86-64
@@ -6,8 +6,8 @@ CONFIG_NAME = linux-x86-64

 ARCH_FLAGS = -m64

-MESA_ASM_SOURCES = $(X86-64_SOURCES)
-GLAPI_ASM_SOURCES = $(X86-64_API)
+ASM_SOURCES = $(X86-64_SOURCES)
+ASM_API = $(X86-64_API)
 ASM_FLAGS = -DUSE_X86_64_ASM

 LIB_DIR = lib64
--- a/configs/linux-x86-64-profile
+++ b/configs/linux-x86-64-profile
@@ -1,8 +0,0 @@
-# Configuration for profiling on Linux for 64-bit X86 (Opteron) with gprof
-
-include $(TOP)/configs/linux-x86-64-static
-
-CONFIG_NAME = linux-x86-64-profile
-
-OPT_FLAGS = -pg -g -O2
-DEFINES += -DNDEBUG
--- a/configs/linux-x86-64-static
+++ b/configs/linux-x86-64-static
@@ -5,7 +5,6 @@ include $(TOP)/configs/linux-x86-64
 CONFIG_NAME = linux-x86-64-static

 MKLIB_OPTIONS = -static
-PIC_FLAGS =

 # Library names (actual file names)
 GL_LIB_NAME = libGL.a
@@ -20,8 +19,5 @@ OSMESA_LIB_DEPS =
 GLU_LIB_DEPS = 
 GLUT_LIB_DEPS = 
 GLW_LIB_DEPS = 
-
-# Need to specify all libraries we may need
-APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -Wl,--start-group \
-               -l$(GL_LIB) $(TOP)/src/mesa/pipe/softpipe/libsoftpipe.a -Wl,--end-group \
-               $(EXTRA_LIB_PATH) -lX11 -lXext -lXmu -lXt -lXi -lpthread -lstdc++ -lm
+APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) \
+               $(EXTRA_LIB_PATH) -lX11 -lXmu -lXt -lXi -lpthread -lstdc++ -lm
--- a/configs/linux-x86-glide
+++ b/configs/linux-x86-glide
@@ -14,12 +14,9 @@ CXXFLAGS = -Wall -O3 -ansi -pedantic -fPIC -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199

 GLUT_CFLAGS = -fexceptions

-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing

-MESA_ASM_SOURCES = $(X86_SOURCES)
-GLAPI_ASM_SOURCES = $(X86_API)
+ASM_SOURCES = $(X86_SOURCES)
+ASM_API = $(X86_API)

 # Library/program dependencies
 GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -L/usr/local/glide/lib -lglide3x -lm -lpthread
--- a/configs/linux-x86-profile
+++ b/configs/linux-x86-profile
@@ -1,8 +0,0 @@
-# Configuration for profiling on Linux with x86 optimizations with gprof
-
-include $(TOP)/configs/linux-x86-static
-
-CONFIG_NAME = linux-x86-profile
-
-OPT_FLAGS = -pg -g -O2
-DEFINES += -DNDEBUG
--- a/configs/linux-x86-static
+++ b/configs/linux-x86-static
@@ -5,7 +5,6 @@ include $(TOP)/configs/linux-x86
 CONFIG_NAME = linux-x86-static

 MKLIB_OPTIONS = -static
-PIC_FLAGS =

 # Library names (actual file names)
 GL_LIB_NAME = libGL.a
@@ -20,7 +19,5 @@ OSMESA_LIB_DEPS =
 GLU_LIB_DEPS = 
 GLUT_LIB_DEPS = 
 GLW_LIB_DEPS = 
-
-# Need to specify all libraries we may need
-APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) \
-	-l$(GL_LIB) $(EXTRA_LIB_PATH) -lX11 -lXext -lXmu -lXt -lXi -lpthread -lstdc++ -lm
+APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) \
+               $(EXTRA_LIB_PATH) -lX11 -lXmu -lXt -lXi -lpthread -lstdc++ -lm
--- a/configs/netbsd
+++ b/configs/netbsd
@@ -12,6 +12,3 @@ CXXFLAGS = -O2 -fPIC
 GLUT_CFLAGS = -fexceptions
 APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/X11R6/lib -lXext -lXmu -lXi -lX11 -lm

-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
--- a/configs/openbsd
+++ b/configs/openbsd
@@ -10,10 +10,6 @@ CXX = g++
 CFLAGS = -O2 -fPIC -I/usr/X11R6/include -DUSE_XSHM -DHZ=100
 CXXFLAGS = -O2 -fPIC -I/usr/X11R6/include -DHZ=100

-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm
 OSMESA_LIB_DEPS = -lm
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB)
--- a/configs/solaris-x86-gcc
+++ b/configs/solaris-x86-gcc
@@ -11,10 +11,6 @@ CFLAGS = -O3 -march=i486 -fPIC -I/usr/openwin/include -DUSE_XSHM
 CXXFLAGS = -O3 -march=i486 -fPIC
 GLUT_CFLAGS = -fexceptions

-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 GL_LIB_DEPS = -L/usr/openwin/lib -lX11 -lXext -lm -lpthread
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lm
 GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/openwin/lib -lX11 -lXmu -lXt -lXi -lm
--- a/configs/solaris-x86-gcc-static
+++ b/configs/solaris-x86-gcc-static
@@ -12,10 +12,6 @@ CXXFLAGS = -O3 -march=i486 -fPIC
 GLUT_CFLAGS = -fexceptions
 MKLIB_OPTIONS = -static

-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 GL_LIB_DEPS = -L/usr/openwin/lib -lX11 -lXext -lm -lpthread
 GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lm
 GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -L/usr/openwin/lib -lX11 -lXmu -lXt -lXi -lm
--- a/configs/sunos4-gcc
+++ b/configs/sunos4-gcc
@@ -11,9 +11,5 @@ CFLAGS = -fPIC -O3 -I/usr/openwin/include -I/usr/include/X11R5 -I/usr/include/X1
 CXXFLAGS = -fPIC -O3 -I/usr/openwin/include -DSUNOS4
 GLUT_CFLAGS = -fexceptions -DSOLARIS_2_4_BUG

-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -L/usr/openwin/lib -lX11 -lXext -lXmu -lXi -lm

--- a/configs/sunos5-gcc
+++ b/configs/sunos5-gcc
@@ -16,8 +16,8 @@ ARCH_FLAGS ?=

 DEFINES = -D_REENTRANT -DUSE_XSHM

-MESA_ASM_SOURCES = $(SPARC_SOURCES)
-GLAPI_ASM_SOURCES = $(SPARC_API)
+ASM_SOURCES = $(SPARC_SOURCES)
+ASM_API = $(SPARC_API)
 ASM_FLAGS = -DUSE_SPARC_ASM

 CFLAGS   = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \
@@ -28,10 +28,6 @@ CXXFLAGS = $(WARN_FLAGS) $(OPT_FLAGS) $(PIC_FLAGS) $(ARCH_FLAGS) $(DEFINES) \

 GLUT_CFLAGS = -fexceptions -DSOLARIS_2_4_BUG

-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 # Library/program dependencies
 EXTRA_LIB_PATH=-L/usr/openwin/lib

--- a/configs/sunos5-v9-cc-g++
+++ b/configs/sunos5-v9-cc-g++
@@ -1,35 +0,0 @@
-# Configuration for SunOS 5, SPARC V9 and cc/g++ (for C and C++ sources)
-
-include $(TOP)/configs/default
-
-CONFIG_NAME = sunos5-v9-cc-g++
-
-MKLIB_OPTIONS = -cplusplus
-
-LIB_DIR = lib64
-
-# Compiler and flags
-CC = cc
-CXX = g++
-
-CXX_WARN_FLAGS = -Wall
-CXX_PIC_FLAGS  = -fPIC
-CXX_OPT_FLAGS  = -O3 -m64 -mcpu=ultrasparc -mv8plus -mvis -g -fomit-frame-pointer -pipe
-CXX_ARCH_FLAGS = -m64
-
-
-CXXFLAGS = $(CXX_WARN_FLAGS) $(CXX_OPT_FLAGS) $(CXX_PIC_FLAGS) $(CXX_ARCH_FLAGS) $(DEFINES) \
-        -I/usr/openwin/include
-
-# Work around aliasing bugs - developers should comment this out
-CXXFLAGS += -fno-strict-aliasing
-
-CFLAGS = -xarch=v9 -KPIC -O -I/usr/openwin/include -I/usr/dt/include -DUSE_XSHM -DPTHREADS
-#CXXFLAGS = -xarch=v9 -KPIC -O -I/usr/openwin/include -I/usr/dt/include -DPTHREADS
-GLUT_CFLAGS = -DSOLARIS_2_4_BUG
-
-GL_LIB_DEPS = -L/usr/openwin/lib -L/usr/dt/lib -lX11 -lXext -lXmu -lXi -lm -lpthread
-GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lm -lCstd -lCrun
-GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) -lm
-GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -L/usr/openwin/lib -lXt -lX11
-APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -lX11 -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm
--- a/configs/ultrix-gcc
+++ b/configs/ultrix-gcc
@@ -12,10 +12,6 @@ CXXFLAGS = -pedantic -O2
 GLUT_CFLAGS = -fexceptions
 MKLIB_OPTIONS = -static

-# Work around aliasing bugs - developers should comment this out
-CFLAGS += -fno-strict-aliasing
-CXXFLAGS += -fno-strict-aliasing
-
 GL_LIB_NAME = libGL.a
 GLU_LIB_NAME = libGLU.a
 GLUT_LIB_NAME = libglut.a
--- a/configure.ac
+++ b/configure.ac
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Thomas Hellström	9b87fafc91	Use the BATCH_SZ macro where appropriate. Bump driver date.	2006-09-29 13:15:43 +00:00
Michel Dänzer	7d553984e2	Merge vsync changes from trunk.	2006-09-29 11:00:50 +00:00
Alan Hourihane	d431dd49cb	Do some extra checking to avoid segfaults when incorrect AGP is in use.	2006-09-28 15:56:00 +00:00
Keith Whitwell	b25c826e59	Add 'GL_RGBA8' as a supported internalFormat for get_teximage_source(). Fixes subtexrate demo.	2006-09-28 14:33:04 +00:00
Thomas Hellström	814cae6a45	Update drm expected version.	2006-09-28 09:34:33 +00:00
Thomas Hellström	410673f64c	Driver date.	2006-09-28 09:18:45 +00:00
Keith Whitwell	a83a3cfa1c	remove duplicate	2006-09-27 20:23:34 +00:00
Keith Whitwell	da89238b13	pull npot mipmap test from trunk	2006-09-27 20:18:36 +00:00
Keith Whitwell	984387b89c	Fix mipmap posititioning for 2d ARB_npot textures. Fix typo in 3D image layout for i915.	2006-09-27 19:01:12 +00:00
Thomas Hellström	93bc5e8402	Fix another single-drawable-multiple-contexts error, that shows up now that the drm_lock_tranfer() function has been removed from drm. The error can cause the wrong context number to be used in the lock, but otherwise should've done no serious harm. We can probably throw away the i915 lock_mutex now.	2006-09-27 17:17:35 +00:00
Thomas Hellström	43722cae42	Valgrind error fix.	2006-09-26 14:15:08 +00:00
Keith Whitwell	f397a2a1e5	Move get_dirty() call to after reserving space in the batchbuffer as this may trigger a batchbuffer flush and raise new dirty state. Add assert_not_dirty() callback required by recent changes.	2006-09-26 11:36:32 +00:00
Keith Whitwell	87a0312068	Add asserts to catch primitives being emitted with state still dirty, or extended when there is no primitive to extend. Turn lock/unlock macros into proper functions and add a debug flag to print out their activity.	2006-09-26 10:44:52 +00:00
Keith Whitwell	ee525436cc	Move get_dirty() call to after reserving space in the batchbuffer as this may trigger a batchbuffer flush and raise new dirty state.	2006-09-26 10:39:42 +00:00
Keith Whitwell	520ba25dc3	Ensure that we don't wrap batchbuffers right at the beginning of a primitive, otherwise vertices can be emitted without the full-state preamble. Fixes gears + texobj lockup.	2006-09-26 09:27:54 +00:00
Thomas Hellström	6f9dc91045	Small COW break on destruction optimization. Fix a comment.	2006-09-26 09:25:47 +00:00
Thomas Hellström	d17637d47f	Fix up buffer object and region refcounting Sinlence some compilation warnings.	2006-09-26 09:00:03 +00:00
Thomas Hellström	980a25cd92	Make regions screen-based instead of context based.	2006-09-25 18:22:21 +00:00
Keith Whitwell	607c474f2d	Import Brian's FBO bugfix from trunk.	2006-09-25 16:11:14 +00:00
Thomas Hellström	2f54146c1f	Add some more buffer usage refcounting. Otherwise these texture buffers will disappear under us.	2006-09-22 18:09:46 +00:00
Keith Whitwell	72aeeef7c3	Remove redundant 3d-state validation prior to blit copypixels. These were causing some issues.	2006-09-22 16:45:52 +00:00
Keith Whitwell	dadc8e2a50	Fix a longstanding memory leak - intelObj->mt refcount was not deleted when the texture was deleted.	2006-09-22 16:33:10 +00:00
Keith Whitwell	02d401b475	Turn some printfs into DBG's. Fix a little mess left by indent.	2006-09-22 16:32:24 +00:00
Keith Whitwell	9d695abcac	rationalize debugging flags	2006-09-22 16:05:09 +00:00
Keith Whitwell	e070007d16	Silence warning	2006-09-22 16:03:36 +00:00
Keith Whitwell	39c4c8d54b	intel_batch_ioctl() lost its return type somehow	2006-09-22 16:03:06 +00:00
Keith Whitwell	4fa3cf225f	Fix initialization of pfPitch - measured in pixels, not bytes.	2006-09-22 15:22:32 +00:00
Thomas Hellström	1c2c1c4560	Another obscure bug causing an infinite loop when multiple contexts are bound to a drawable.	2006-09-22 14:52:31 +00:00
Keith Whitwell	e3904516bb	bring in recent texture swizzle changes from trunk	2006-09-22 14:18:56 +00:00
Keith Whitwell	ceb222798b	- Make point_smooth, polygon_smooth fallbacks per-primitive rather than total. - Also - disable those fallbacks unless INTEL_STRICT_CONFORMANCE is set. - Gate some FBO debugging on INTEL_DEBUG=fbo	2006-09-22 14:16:33 +00:00
Keith Whitwell	6abcf6a3d3	Fix bug detecting overlapping regions in texture copypixels. Import code from trunk to allow blit copypixels when scissor is active.	2006-09-22 14:10:39 +00:00
Keith Whitwell	db0ed8942f	Check for FragmentProgram._Enabled rather than _Active. _Active is set when a driver is using an internally generated fragment program to emulate fixed function behaviour. For the software rasterizer, we're better off using the fixed function code directly.	2006-09-22 11:43:19 +00:00
Keith Whitwell	bd9f38ccaa	Flush driver, not just tnl module.	2006-09-22 11:39:31 +00:00
Keith Whitwell	b15421c22b	resize buffers in MakeCurrent	2006-09-22 11:37:39 +00:00
Thomas Hellström	5db0e131ef	Fix intel texture image buffer leak.	2006-09-22 10:55:05 +00:00
Michel Dänzer	b249ff8a86	Fix INTEL_DEBUG=fall.	2006-09-20 16:07:39 +00:00
Michel Dänzer	9d6e0f5d64	Revert INTEL_FIREVERTICES to flush primitives instead of asserting none pending. The assertion was triggered in some cases, e.g. by the xscreensaver hack stonerview.	2006-09-20 15:29:36 +00:00
Thomas Hellström	4f8549634e	Fix a fencing bug.	2006-09-18 18:55:29 +00:00
Keith Whitwell	3345ab8ccf	fix bzflag crashes	2006-09-18 18:11:42 +00:00
Thomas Hellström	cd3c9febda	Check for NULL in intelSwapBuffers()	2006-09-18 14:18:14 +00:00
Thomas Hellström	8c58a32360	Fix fencing when submitting empty batchbuffers. Add a proper buffer waitidle method.	2006-09-18 14:11:00 +00:00
Thomas Hellström	0d646ea3a8	Relax the requirement in pool_takedown in the intel batch buffer pool, that all allocated buffes should've been handed back before releasing the pool. This is to account for the case where whe app calls DestroyScreen() without first destroying all contexts.	2006-09-18 08:41:22 +00:00
Thomas Hellström	6a33e6d221	Wait for buffer idle unlocked before mapping in some cases. Greatly improves responsiveness. Add an MI_FLUSH after each batchbuffer and tell the kernel we're doing so with the new DRM_I915_FENCE_FLAG_FLUSHED (Requires drm update). This can be done on a per-batchbuffer basis. The DRM handles all fence accounting and signals earlier fences that also needs a flush.	2006-09-15 14:52:31 +00:00
Thomas Hellström	fc4bc6fc97	Adapt to updated libdrm.	2006-09-15 09:22:08 +00:00
Keith Whitwell	4239cfd534	Turn back on zcopy uploads - my timings were incorrect.	2006-09-14 14:48:34 +00:00
Keith Whitwell	b0902a4158	Silence debug, cope with calling intel_region_cow() with lock already held.	2006-09-14 14:48:09 +00:00
Keith Whitwell	269219dc05	Disable zero-copy texturing for now as it isn't such a win with the newest memory manager code.	2006-09-14 12:11:46 +00:00
Thomas Hellström	5dbadd418c	Fix a FBO render offset bug. The current code failed if the dri drawable was updated before the call to intelFlush(), and typically rendered into an FBO using the back buffer cliprects.	2006-09-13 15:10:09 +00:00
Keith Whitwell	71bce51324	update driver date and branch debug	2006-09-13 12:45:42 +00:00
Keith Whitwell	308d377ca8	Bring in writemask + TEX fix from trunk	2006-09-13 12:45:21 +00:00
Thomas Hellström	4f39d22c29	texmem_0_3_branch with adaptations to the drm-ttm-0-2 branch. Indent the i915 driver directory.	2006-09-12 14:13:36 +00:00
Keith Whitwell	8dab7963b7	Add a demo illustrating various techniques for uploading dynamic (ie streaming) texture images via PBO's. Two of these currently seem to trigger a memory leak in the i915 driver, but at least one (PBO_PINGPONG) illustrates the good speedups available with PBO's on the i915 driver, particularly zero-copy uploads.	2006-08-30 20:41:18 +00:00
Keith Whitwell	ec30116c9f	Must lock hardware around call to intelEmitCopyBlit()	2006-08-30 20:18:33 +00:00
Keith Whitwell	5ac3ad7722	implement zero-copy uploads for glTexImage from suitable pixel buffer objects	2006-08-30 19:55:32 +00:00
Keith Whitwell	fe239744aa	Bring in improved version of the texdown demo from the original texmem branch	2006-08-30 09:15:40 +00:00
Keith Whitwell	137dcd4a46	remove orphan file	2006-08-29 12:11:22 +00:00
Keith Whitwell	0d7755fc73	remove i915_texprog.c as it is no longer needed	2006-08-29 11:58:23 +00:00
Keith Whitwell	c863e63549	remove hashing for bm buffers, use an opaque pointer instead of an integer	2006-08-29 11:45:13 +00:00
Keith Whitwell	62920e2ab2	revert last commit	2006-08-28 15:14:55 +00:00
Keith Whitwell	ce3885fc5f	dependent texture read demo	2006-08-28 15:11:10 +00:00
Keith Whitwell	bf0c1ca618	use mesa's texenvprogram in preference to i915 version. Enable tex_env_crossbar	2006-08-28 11:50:10 +00:00
Keith Whitwell	64bc9caa1c	various texture tweaks	2006-08-28 11:49:30 +00:00
Keith Whitwell	89a2ea6fd3	Add missing wait for busy buffers in bmMapBuffer()	2006-08-28 11:37:07 +00:00
Keith Whitwell	41123a85ec	Fixes for i945 texture layouts	2006-08-28 11:35:20 +00:00
Keith Whitwell	f10469abe8	add dependent texture read test	2006-08-17 13:25:14 +00:00
Keith Whitwell	4a74de797c	Make bgra format more explicit	2006-08-17 13:24:57 +00:00
Dave Airlie	c745394242	fix from i965 driver for compressed textures on texman	2006-08-16 03:33:00 +00:00
Keith Whitwell	f9f3de8c31	first pass at texture uploads from pbo's with the blitter	2006-08-03 15:41:10 +00:00
Keith Whitwell	3d0a073a71	trivial test for pbo-based texture uploads	2006-08-03 15:40:19 +00:00
Keith Whitwell	219ee91fa8	Get basic texturing working again on i945	2006-08-03 11:22:09 +00:00
Keith Whitwell	632eae3fec	Correct pitch / cpp calculation	2006-08-03 10:31:47 +00:00
Keith Whitwell	f378bcd8bf	drmOpen/Close once	2006-08-02 10:24:01 +00:00
Keith Whitwell	ded29089f3	new files from merge of texmem driver	2006-08-02 10:08:58 +00:00
Keith Whitwell	527c05eb2a	Pull the texmem i915 driver onto a new branch closer to the current trunk. Compiles but otherwise untested.	2006-08-02 10:01:03 +00:00